Documentation: bindings: update the Berlin controllers documentation

We're moving from a single node for multiple devices to a node with one
sub-node per sub-device, registered by simple-mfd. Update the
documentation to reflect the changes.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 060daafc14ff58d05f816f01e203c1c57cb8111b..1f05794ecf74a427850f2e381d8e221116c87502 100644 (file)
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -61,10 +61,13 @@ chip control registers, so there should be a single DT node only providing the
 different functions which are described below.
 
 Required properties:
-- compatible: shall be one of
-       "marvell,berlin2-chip-ctrl" for BG2
-       "marvell,berlin2cd-chip-ctrl" for BG2CD
-       "marvell,berlin2q-chip-ctrl" for BG2Q
+- compatible:
+       * the first value should be one of:
+               "marvell,berlin2-chip-ctrl" for BG2
+               "marvell,berlin2cd-chip-ctrl" for BG2CD
+               "marvell,berlin2q-chip-ctrl" for BG2Q
+       * the second and third values must be:
+               "simple-mfd", "syscon"
 - reg: address and length of following register sets for
   BG2/BG2CD: chip control register set
   BG2Q: chip control register set and cpu pll registers
@@ -75,10 +78,13 @@ Marvell Berlin SoCs have a system control register set providing several
 individual registers dealing with pinmux, padmux, and reset.
 
 Required properties:
-- compatible: should be one of
-       "marvell,berlin2-system-ctrl" for BG2
-       "marvell,berlin2cd-system-ctrl" for BG2CD
-       "marvell,berlin2q-system-ctrl" for BG2Q
+- compatible:
+       * the first value should be one of:
+               "marvell,berlin2-system-ctrl" for BG2
+               "marvell,berlin2cd-system-ctrl" for BG2CD
+               "marvell,berlin2q-system-ctrl" for BG2Q
+       * the second and third values must be:
+               "simple-mfd", "syscon"
 - reg: address and length of the system control register set
 
 * Clock provider binding
@@ -130,7 +136,7 @@ Required property:
 Example:
 
 chip: chip-control@ea0000 {
-       compatible = "marvell,berlin2-chip-ctrl";
+       compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", "syscon";
        #clock-cells = <1>;
        #reset-cells = <2>;
        reg = <0xea0000 0x400>;
@@ -144,7 +150,7 @@ chip: chip-control@ea0000 {
 };
 
 sysctrl: system-controller@d000 {
-       compatible = "marvell,berlin2-system-ctrl";
+       compatible = "marvell,berlin2-system-ctrl", "simple-mfd", "syscon";
        reg = <0xd000 0x100>;
 
        uart0_pmux: uart0-pmux {