#include <asm/io.h>
#include <asm/byteorder.h>
+#include "netxen_nic_hdr.h"
#include "netxen_nic_hw.h"
#define _NETXEN_NIC_LINUX_MAJOR 4
#define MPORT_SINGLE_FUNCTION_MODE 0x1111
#define MPORT_MULTI_FUNCTION_MODE 0x2222
-#include "netxen_nic_phan_reg.h"
-
/*
* NetXen host-peg signal message structure
*
u64 length;
};
-#define _netxen_set_bits(config_word, start, bits, val) {\
- unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start));\
- unsigned long long __tvalue = (val); \
- (config_word) &= ~__tmask; \
- (config_word) |= (((__tvalue) << (start)) & __tmask); \
-}
-
-#define _netxen_clear_bits(config_word, start, bits) {\
- unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start)); \
- (config_word) &= ~__tmask; \
-}
+struct netxen_recv_crb {
+ u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
+ u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+ u32 sw_int_mask[NUM_STS_DESC_RINGS];
+};
/* Following defines are for the state of the buffers */
#define NETXEN_BUFFER_FREE 0
const struct firmware *fw;
};
+/* Set promiscuous mode for a GbE interface */
+int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, u32 mode);
+int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
+ u32 mode);
+/* Generic enable for GbE ports. Will detect the speed of the link. */
+int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
+int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port);
+
+/* Disable a GbE interface */
+int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter);
+int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
+
int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);
#define NETXEN_FW_VERSION_MINOR (NETXEN_CAM_RAM(0x154))
#define NETXEN_FW_VERSION_SUB (NETXEN_CAM_RAM(0x158))
#define NETXEN_ROM_LOCK_ID (NETXEN_CAM_RAM(0x100))
+#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
#define NETXEN_CRB_WIN_LOCK_ID (NETXEN_CAM_RAM(0x124))
-#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
+#define NIC_CRB_BASE (NETXEN_CAM_RAM(0x200))
+#define NIC_CRB_BASE_2 (NETXEN_CAM_RAM(0x700))
+#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
+#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
+
+#define NX_CDRP_CRB_OFFSET (NETXEN_NIC_REG(0x18))
+#define NX_ARG1_CRB_OFFSET (NETXEN_NIC_REG(0x1c))
+#define NX_ARG2_CRB_OFFSET (NETXEN_NIC_REG(0x20))
+#define NX_ARG3_CRB_OFFSET (NETXEN_NIC_REG(0x24))
+#define NX_SIGN_CRB_OFFSET (NETXEN_NIC_REG(0x28))
+
+#define CRB_HOST_DUMMY_BUF_ADDR_HI (NETXEN_NIC_REG(0x3c))
+#define CRB_HOST_DUMMY_BUF_ADDR_LO (NETXEN_NIC_REG(0x40))
+
+#define CRB_CMDPEG_STATE (NETXEN_NIC_REG(0x50))
+#define CRB_RCVPEG_STATE (NETXEN_NIC_REG(0x13c))
+
+#define CRB_XG_STATE (NETXEN_NIC_REG(0x94))
+#define CRB_XG_STATE_P3 (NETXEN_NIC_REG(0x98))
+#define CRB_PF_LINK_SPEED_1 (NETXEN_NIC_REG(0xe8))
+#define CRB_PF_LINK_SPEED_2 (NETXEN_NIC_REG(0xec))
+
+#define CRB_MPORT_MODE (NETXEN_NIC_REG(0xc4))
+#define CRB_DMA_SHIFT (NETXEN_NIC_REG(0xcc))
+#define CRB_INT_VECTOR (NETXEN_NIC_REG(0xd4))
+
+#define CRB_CMD_PRODUCER_OFFSET (NETXEN_NIC_REG(0x08))
+#define CRB_CMD_CONSUMER_OFFSET (NETXEN_NIC_REG(0x0c))
+#define CRB_CMD_PRODUCER_OFFSET_1 (NETXEN_NIC_REG(0x1ac))
+#define CRB_CMD_CONSUMER_OFFSET_1 (NETXEN_NIC_REG(0x1b0))
+#define CRB_CMD_PRODUCER_OFFSET_2 (NETXEN_NIC_REG(0x1b8))
+#define CRB_CMD_CONSUMER_OFFSET_2 (NETXEN_NIC_REG(0x1bc))
+#define CRB_CMD_PRODUCER_OFFSET_3 (NETXEN_NIC_REG(0x1d0))
+#define CRB_CMD_CONSUMER_OFFSET_3 (NETXEN_NIC_REG(0x1d4))
+#define CRB_TEMP_STATE (NETXEN_NIC_REG(0x1b4))
+
+#define CRB_V2P_0 (NETXEN_NIC_REG(0x290))
+#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
+#define CRB_DRIVER_VERSION (NETXEN_NIC_REG(0x2a0))
+
+#define CRB_SW_INT_MASK_0 (NETXEN_NIC_REG(0x1d8))
+#define CRB_SW_INT_MASK_1 (NETXEN_NIC_REG(0x1e0))
+#define CRB_SW_INT_MASK_2 (NETXEN_NIC_REG(0x1e4))
+#define CRB_SW_INT_MASK_3 (NETXEN_NIC_REG(0x1e8))
+
+#define CRB_FW_CAPABILITIES_1 (NETXEN_CAM_RAM(0x128))
+#define CRB_MAC_BLOCK_START (NETXEN_CAM_RAM(0x1c0))
+
+/*
+ * capabilities register, can be used to selectively enable/disable features
+ * for backward compability
+ */
+#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
+#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
+#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
+#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
+
+#define INTR_SCHEME_PERPORT 0x1
+#define MSI_MODE_MULTIFUNC 0x1
+
+/* used for ethtool tests */
+#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
+
+/*
+ * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
+ * which can be read by the Phantom host to get producer/consumer indexes from
+ * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
+ * registers will be used for the addresses of the ring's shared memory
+ * on the Phantom.
+ */
+
+#define nx_get_temp_val(x) ((x) >> 16)
+#define nx_get_temp_state(x) ((x) & 0xffff)
+#define nx_encode_temp(val, state) (((val) << 16) | (state))
+
+/*
+ * Temperature control.
+ */
+enum {
+ NX_TEMP_NORMAL = 0x1, /* Normal operating range */
+ NX_TEMP_WARN, /* Sound alert, temperature getting high */
+ NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
+};
/* Lock IDs for PHY lock */
#define PHY_LOCK_DRIVER 0x44524956
+++ /dev/null
-/*
- * Copyright (C) 2003 - 2009 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
- */
-
-#ifndef __NIC_PHAN_REG_H_
-#define __NIC_PHAN_REG_H_
-
-/*
- * CRB Registers or queue message done only at initialization time.
- */
-#define NIC_CRB_BASE NETXEN_CAM_RAM(0x200)
-#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
-#define NIC_CRB_BASE_2 NETXEN_CAM_RAM(0x700)
-#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
-
-#define CRB_PHAN_CNTRL_LO_OFFSET NETXEN_NIC_REG(0x00)
-#define CRB_PHAN_CNTRL_HI_OFFSET NETXEN_NIC_REG(0x04)
-#define CRB_CMD_PRODUCER_OFFSET NETXEN_NIC_REG(0x08)
-#define CRB_CMD_CONSUMER_OFFSET NETXEN_NIC_REG(0x0c)
-#define CRB_PAUSE_ADDR_LO NETXEN_NIC_REG(0x10)
-#define CRB_PAUSE_ADDR_HI NETXEN_NIC_REG(0x14)
-#define NX_CDRP_CRB_OFFSET NETXEN_NIC_REG(0x18)
-#define NX_ARG1_CRB_OFFSET NETXEN_NIC_REG(0x1c)
-#define NX_ARG2_CRB_OFFSET NETXEN_NIC_REG(0x20)
-#define NX_ARG3_CRB_OFFSET NETXEN_NIC_REG(0x24)
-#define NX_SIGN_CRB_OFFSET NETXEN_NIC_REG(0x28)
-#define CRB_CMD_INTR_LOOP NETXEN_NIC_REG(0x20)
-#define CRB_CMD_DMA_LOOP NETXEN_NIC_REG(0x24)
-#define CRB_RCV_INTR_LOOP NETXEN_NIC_REG(0x28)
-#define CRB_RCV_DMA_LOOP NETXEN_NIC_REG(0x2c)
-#define CRB_ENABLE_TX_INTR NETXEN_NIC_REG(0x30)
-#define CRB_MMAP_ADDR_3 NETXEN_NIC_REG(0x34)
-#define CRB_CMDPEG_CMDRING NETXEN_NIC_REG(0x38)
-#define CRB_HOST_DUMMY_BUF_ADDR_HI NETXEN_NIC_REG(0x3c)
-#define CRB_HOST_DUMMY_BUF_ADDR_LO NETXEN_NIC_REG(0x40)
-#define CRB_MMAP_ADDR_0 NETXEN_NIC_REG(0x44)
-#define CRB_MMAP_ADDR_1 NETXEN_NIC_REG(0x48)
-#define CRB_MMAP_ADDR_2 NETXEN_NIC_REG(0x4c)
-#define CRB_CMDPEG_STATE NETXEN_NIC_REG(0x50)
-#define CRB_MMAP_SIZE_0 NETXEN_NIC_REG(0x54)
-#define CRB_MMAP_SIZE_1 NETXEN_NIC_REG(0x58)
-#define CRB_MMAP_SIZE_2 NETXEN_NIC_REG(0x5c)
-#define CRB_MMAP_SIZE_3 NETXEN_NIC_REG(0x60)
-#define CRB_GLOBAL_INT_COAL NETXEN_NIC_REG(0x64)
-#define CRB_INT_COAL_MODE NETXEN_NIC_REG(0x68)
-#define CRB_MAX_RCV_BUFS NETXEN_NIC_REG(0x6c)
-#define CRB_TX_INT_THRESHOLD NETXEN_NIC_REG(0x70)
-#define CRB_RX_PKT_TIMER NETXEN_NIC_REG(0x74)
-#define CRB_TX_PKT_TIMER NETXEN_NIC_REG(0x78)
-#define CRB_RX_PKT_CNT NETXEN_NIC_REG(0x7c)
-#define CRB_RX_TMR_CNT NETXEN_NIC_REG(0x80)
-#define CRB_RX_LRO_TIMER NETXEN_NIC_REG(0x84)
-#define CRB_RX_LRO_MID_TIMER NETXEN_NIC_REG(0x88)
-#define CRB_DMA_MAX_RCV_BUFS NETXEN_NIC_REG(0x8c)
-#define CRB_MAX_DMA_ENTRIES NETXEN_NIC_REG(0x90)
-#define CRB_XG_STATE NETXEN_NIC_REG(0x94) /* XG Link status */
-#define CRB_XG_STATE_P3 NETXEN_NIC_REG(0x98) /* XG PF Link status */
-#define CRB_AGENT_TX_SIZE NETXEN_NIC_REG(0x9c)
-#define CRB_AGENT_TX_TYPE NETXEN_NIC_REG(0xa0)
-#define CRB_AGENT_TX_ADDR NETXEN_NIC_REG(0xa4)
-#define CRB_AGENT_TX_MSS NETXEN_NIC_REG(0xa8)
-#define CRB_TX_STATE NETXEN_NIC_REG(0xac)
-#define CRB_TX_COUNT NETXEN_NIC_REG(0xb0)
-#define CRB_RX_STATE NETXEN_NIC_REG(0xb4)
-#define CRB_RX_PERF_DEBUG_1 NETXEN_NIC_REG(0xb8)
-#define CRB_RX_LRO_CONTROL NETXEN_NIC_REG(0xbc)
-#define CRB_RX_LRO_START_NUM NETXEN_NIC_REG(0xc0)
-#define CRB_MPORT_MODE NETXEN_NIC_REG(0xc4)
-#define CRB_CMD_RING_SIZE NETXEN_NIC_REG(0xc8)
-#define CRB_DMA_SHIFT NETXEN_NIC_REG(0xcc)
-#define CRB_INT_VECTOR NETXEN_NIC_REG(0xd4)
-#define CRB_CTX_RESET NETXEN_NIC_REG(0xd8)
-#define CRB_HOST_STS_PROD NETXEN_NIC_REG(0xdc)
-#define CRB_HOST_STS_CONS NETXEN_NIC_REG(0xe0)
-#define CRB_PEG_CMD_PROD NETXEN_NIC_REG(0xe4)
-#define CRB_PF_LINK_SPEED_1 NETXEN_NIC_REG(0xe8)
-#define CRB_PF_LINK_SPEED_2 NETXEN_NIC_REG(0xec)
-#define CRB_HOST_BUFFER_CONS NETXEN_NIC_REG(0xf0)
-#define CRB_JUMBO_BUFFER_PROD NETXEN_NIC_REG(0xf4)
-#define CRB_JUMBO_BUFFER_CONS NETXEN_NIC_REG(0xf8)
-#define CRB_HOST_DUMMY_BUF NETXEN_NIC_REG(0xfc)
-
-#define CRB_RCVPEG_STATE NETXEN_NIC_REG(0x13c)
-#define CRB_CMD_PRODUCER_OFFSET_1 NETXEN_NIC_REG(0x1ac)
-#define CRB_CMD_CONSUMER_OFFSET_1 NETXEN_NIC_REG(0x1b0)
-#define CRB_CMD_PRODUCER_OFFSET_2 NETXEN_NIC_REG(0x1b8)
-#define CRB_CMD_CONSUMER_OFFSET_2 NETXEN_NIC_REG(0x1bc)
-#define CRB_CMD_PRODUCER_OFFSET_3 NETXEN_NIC_REG(0x1d0)
-#define CRB_CMD_CONSUMER_OFFSET_3 NETXEN_NIC_REG(0x1d4)
-#define CRB_TEMP_STATE NETXEN_NIC_REG(0x1b4)
-
-#define CRB_V2P_0 NETXEN_NIC_REG(0x290)
-#define CRB_V2P_1 NETXEN_NIC_REG(0x294)
-#define CRB_V2P_2 NETXEN_NIC_REG(0x298)
-#define CRB_V2P_3 NETXEN_NIC_REG(0x29c)
-#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
-#define CRB_DRIVER_VERSION NETXEN_NIC_REG(0x2a0)
-#define CRB_SW_INT_MASK_0 NETXEN_NIC_REG(0x1d8)
-#define CRB_SW_INT_MASK_1 NETXEN_NIC_REG(0x1e0)
-#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4)
-#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8)
-
-#define CRB_FW_CAPABILITIES_1 NETXEN_CAM_RAM(0x128)
-#define CRB_MAC_BLOCK_START NETXEN_CAM_RAM(0x1c0)
-
-/*
- * capabilities register, can be used to selectively enable/disable features
- * for backward compability
- */
-#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
-#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
-#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
-#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
-
-#define INTR_SCHEME_PERPORT 0x1
-#define MSI_MODE_MULTIFUNC 0x1
-
-/* used for ethtool tests */
-#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
-
-/*
- * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
- * which can be read by the Phantom host to get producer/consumer indexes from
- * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
- * registers will be used for the addresses of the ring's shared memory
- * on the Phantom.
- */
-
-#define nx_get_temp_val(x) ((x) >> 16)
-#define nx_get_temp_state(x) ((x) & 0xffff)
-#define nx_encode_temp(val, state) (((val) << 16) | (state))
-
-/*
- * CRB registers used by the receive peg logic.
- */
-
-struct netxen_recv_crb {
- u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
- u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
- u32 sw_int_mask[NUM_STS_DESC_RINGS];
-};
-
-/*
- * Temperature control.
- */
-enum {
- NX_TEMP_NORMAL = 0x1, /* Normal operating range */
- NX_TEMP_WARN, /* Sound alert, temperature getting high */
- NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
-};
-
-#endif /* __NIC_PHAN_REG_H_ */
projects / karo-tx-linux.git / commitdiff