source "drivers/usb/chipidea/Kconfig"
+source "drivers/usb/isp1760/Kconfig"
+
comment "USB port drivers"
if USB
obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_DWC2) += dwc2/
+obj-$(CONFIG_USB_ISP1760) += isp1760/
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
obj-$(CONFIG_USB_HWA_HCD) += host/
-obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_IMX21_HCD) += host/
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/
obj-$(CONFIG_USB_FUSBH200_HCD) += host/
Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
VHDL IP core library.
-config USB_ISP1761_UDC
- boolean "NXP ISP1761 USB Device Controller"
- depends on USB_ISP1760_HCD
- help
- The NXP ISP1761 is a dual-role high-speed USB host and device
- controller.
-
config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP1
To compile this driver as a module, choose M here: the
module will be called isp116x-hcd.
-config USB_ISP1760_HCD
- tristate "ISP 1760 HCD support"
- ---help---
- The ISP1760 chip is a USB 2.0 host controller.
-
- This driver does not support isochronous transfers or OTG.
- This USB controller is usually attached to a non-DMA-Master
- capable bus. NXP's eval kit brings this chip on PCI card
- where the chip itself is behind a PLB to simulate such
- a bus.
-
- To compile this driver as a module, choose M here: the
- module will be called isp1760.
-
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
---help---
# tell define_trace.h where to find the xhci trace header
CFLAGS_xhci-trace.o := -I$(src)
-isp1760-y := isp1760-core.o isp1760-hcd.o isp1760-if.o
-isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
-
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
--- /dev/null
+config USB_ISP1760
+ tristate "NXP ISP 1760/1761 support"
+ depends on USB
+ help
+ Say Y or M here if your system as an ISP1760 USB host controller
+ or an ISP1761 USB dual-role controller.
+
+ This driver does not support isochronous transfers or OTG.
+ This USB controller is usually attached to a non-DMA-Master
+ capable bus. NXP's eval kit brings this chip on PCI card
+ where the chip itself is behind a PLB to simulate such
+ a bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called isp1760.
+
+config USB_ISP1761_UDC
+ boolean "NXP ISP1761 USB Device Controller"
+ depends on USB_ISP1760 && USB_GADGET
+ help
+ The NXP ISP1761 is a dual-role high-speed USB host and device
+ controller.
--- /dev/null
+isp1760-y := isp1760-core.o isp1760-hcd.o isp1760-if.o
+isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
+
+obj-$(CONFIG_USB_ISP1760) += isp1760.o