return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)];
}
-
/*
- * In *base and *limit, pass back the full 40-bit base and limit physical
- * addresses for the node given by node_id. This information is obtained from
- * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The
- * base and limit addresses are of type SysAddr, as defined at the start of
- * section 3.4.4 (p. 70). They are the lowest and highest physical addresses
- * in the address range they represent.
+ * returns true if the SysAddr given by sys_addr matches the
+ * DRAM base/limit associated with node_id
*/
-static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id,
- u64 *base, u64 *limit)
+static bool amd64_base_limit_match(struct amd64_pvt *pvt, u64 sys_addr, int nid)
{
- *base = pvt->dram_base[node_id];
- *limit = pvt->dram_limit[node_id];
-}
-
-/*
- * Return 1 if the SysAddr given by sys_addr matches the base/limit associated
- * with node_id
- */
-static int amd64_base_limit_match(struct amd64_pvt *pvt,
- u64 sys_addr, int node_id)
-{
- u64 base, limit, addr;
-
- amd64_get_base_and_limit(pvt, node_id, &base, &limit);
+ u64 addr;
/* The K8 treats this as a 40-bit value. However, bits 63-40 will be
* all ones if the most significant implemented address bit is 1.
*/
addr = sys_addr & 0x000000ffffffffffull;
- return (addr >= base) && (addr <= limit);
+ return ((addr >= get_dram_base(pvt, nid)) &&
+ (addr <= get_dram_limit(pvt, nid)));
}
/*
* registers. Therefore we arbitrarily choose to read it from the
* register for node 0.
*/
- intlv_en = pvt->dram_IntlvEn[0];
+ intlv_en = dram_intlv_en(pvt, 0);
if (intlv_en == 0) {
- for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) {
+ for (node_id = 0; node_id < DRAM_RANGES; node_id++) {
if (amd64_base_limit_match(pvt, sys_addr, node_id))
goto found;
}
bits = (((u32) sys_addr) >> 12) & intlv_en;
for (node_id = 0; ; ) {
- if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits)
+ if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits)
break; /* intlv_sel field matches */
- if (++node_id >= DRAM_REG_COUNT)
+ if (++node_id >= DRAM_RANGES)
goto err_no_match;
}
return -1;
}
-/*
- * Return the base value defined by the DRAM Base register for the node
- * represented by mci. This function returns the full 40-bit value despite the
- * fact that the register only stores bits 39-24 of the value. See section
- * 3.4.4.1 (BKDG #26094, K8, revA-E)
- */
-static inline u64 get_dram_base(struct mem_ctl_info *mci)
-{
- struct amd64_pvt *pvt = mci->pvt_info;
-
- return pvt->dram_base[pvt->mc_node_id];
-}
-
/*
* Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094)
* for the node represented by mci. Info is passed back in *hole_base,
*/
static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr)
{
+ struct amd64_pvt *pvt = mci->pvt_info;
u64 dram_base, hole_base, hole_offset, hole_size, dram_addr;
int ret = 0;
- dram_base = get_dram_base(mci);
+ dram_base = get_dram_base(pvt, pvt->mc_node_id);
ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
&hole_size);
* See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
* concerning translating a DramAddr to an InputAddr.
*/
- intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
+ intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) +
(dram_addr & 0xfff);
node_id = pvt->mc_node_id;
BUG_ON((node_id < 0) || (node_id > 7));
- intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
+ intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
if (intlv_shift == 0) {
debugf1(" InputAddr 0x%lx translates to DramAddr of "
bits = ((input_addr & 0xffffff000ull) << intlv_shift) +
(input_addr & 0xfff);
- intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1);
+ intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1);
dram_addr = bits + (intlv_sel << 12);
debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx "
static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
{
struct amd64_pvt *pvt = mci->pvt_info;
- u64 hole_base, hole_offset, hole_size, base, limit, sys_addr;
+ u64 hole_base, hole_offset, hole_size, base, sys_addr;
int ret = 0;
ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
}
}
- amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit);
+ base = get_dram_base(pvt, pvt->mc_node_id);
sys_addr = dram_addr + base;
/*
(info->nbeal & ~0x03);
}
-/*
- * Read the Base and Limit registers for K8 based Memory controllers; extract
- * fields from the 'raw' reg into separate data fields
- *
- * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN
- */
-static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{
- u32 low;
- u32 off = dram << 3; /* 8 bytes between DRAM entries */
+ u32 off = range << 3;
- amd64_read_pci_cfg(pvt->F1, K8_DRAM_BASE_LOW + off, &low);
+ amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo);
+ amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
- /* Extract parts into separate data entries */
- pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
- pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
- pvt->dram_rw_en[dram] = (low & 0x3);
+ if (boot_cpu_data.x86 == 0xf)
+ return;
- amd64_read_pci_cfg(pvt->F1, K8_DRAM_LIMIT_LOW + off, &low);
+ if (!dram_rw(pvt, range))
+ return;
- /*
- * Extract parts into separate data entries. Limit is the HIGHEST memory
- * location of the region, so lower 24 bits need to be all ones
- */
- pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
- pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
- pvt->dram_DstNode[dram] = (low & 0x7);
+ amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi);
+ amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
}
static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
(info->nbeal & ~0x01);
}
-/*
- * Read the Base and Limit registers for F10 based Memory controllers. Extract
- * fields from the 'raw' reg into separate data fields.
- *
- * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN.
- */
-static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
-{
- u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit;
-
- low_offset = K8_DRAM_BASE_LOW + (dram << 3);
- high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
-
- /* read the 'raw' DRAM BASE Address register */
- amd64_read_pci_cfg(pvt->F1, low_offset, &low_base);
- amd64_read_pci_cfg(pvt->F1, high_offset, &high_base);
-
- /* Extract parts into separate data entries */
- pvt->dram_rw_en[dram] = (low_base & 0x3);
-
- if (pvt->dram_rw_en[dram] == 0)
- return;
-
- pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
-
- pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
- (((u64)low_base & 0xFFFF0000) << 8);
-
- low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
- high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
-
- /* read the 'raw' LIMIT registers */
- amd64_read_pci_cfg(pvt->F1, low_offset, &low_limit);
- amd64_read_pci_cfg(pvt->F1, high_offset, &high_limit);
-
- pvt->dram_DstNode[dram] = (low_limit & 0x7);
- pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
-
- /*
- * Extract address values and form a LIMIT address. Limit is the HIGHEST
- * memory location of the region, so low 24 bits need to be all ones.
- */
- pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
- (((u64) low_limit & 0xFFFF0000) << 8) |
- 0x00FFFFFF;
-}
-
static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
{
}
/* For a given @dram_range, check if @sys_addr falls within it. */
-static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
+static int f10_match_to_this_node(struct amd64_pvt *pvt, int range,
u64 sys_addr, int *nid, int *chan_sel)
{
- int node_id, cs_found = -EINVAL, high_range = 0;
- u32 intlv_en, intlv_sel, intlv_shift, hole_off;
+ int cs_found = -EINVAL, high_range = 0;
+ u32 intlv_shift, hole_off;
u32 hole_valid, tmp, dct_sel_base, channel;
- u64 dram_base, chan_addr, dct_sel_base_off;
-
- dram_base = pvt->dram_base[dram_range];
- intlv_en = pvt->dram_IntlvEn[dram_range];
+ u64 chan_addr, dct_sel_base_off;
- node_id = pvt->dram_DstNode[dram_range];
- intlv_sel = pvt->dram_IntlvSel[dram_range];
+ u8 node_id = dram_dst_node(pvt, range);
+ u32 intlv_en = dram_intlv_en(pvt, range);
+ u32 intlv_sel = dram_intlv_sel(pvt, range);
+ u64 dram_base = get_dram_base(pvt, range);
- debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n",
- dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]);
+ debugf1("(range %d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n",
+ range, dram_base, sys_addr, get_dram_limit(pvt, range));
/*
* This assumes that one node's DHAR is the same as all the other
static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
int *node, int *chan_sel)
{
- int dram_range, cs_found = -EINVAL;
- u64 dram_base, dram_limit;
+ int range, cs_found = -EINVAL;
- for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) {
+ for (range = 0; range < DRAM_RANGES; range++) {
- if (!pvt->dram_rw_en[dram_range])
+ if (!dram_rw(pvt, range))
continue;
- dram_base = pvt->dram_base[dram_range];
- dram_limit = pvt->dram_limit[dram_range];
+ if ((get_dram_base(pvt, range) <= sys_addr) &&
+ (get_dram_limit(pvt, range) >= sys_addr)) {
- if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) {
-
- cs_found = f10_match_to_this_node(pvt, dram_range,
+ cs_found = f10_match_to_this_node(pvt, range,
sys_addr, node,
chan_sel);
if (cs_found >= 0)
.ops = {
.early_channel_count = k8_early_channel_count,
.get_error_address = k8_get_error_address,
- .read_dram_base_limit = k8_read_dram_base_limit,
.map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
.dbam_to_cs = k8_dbam_to_chip_select,
.read_dct_pci_cfg = k8_read_dct_pci_cfg,
.ops = {
.early_channel_count = f10_early_channel_count,
.get_error_address = f10_get_error_address,
- .read_dram_base_limit = f10_read_dram_base_limit,
.read_dram_ctl_register = f10_read_dram_ctl_register,
.map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
.dbam_to_cs = f10_dbam_to_chip_select,
{
u64 msr_val;
u32 tmp;
- int dram;
+ int range;
/*
* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since
if (pvt->ops->read_dram_ctl_register)
pvt->ops->read_dram_ctl_register(pvt);
- for (dram = 0; dram < DRAM_REG_COUNT; dram++) {
- /*
- * Call CPU specific READ function to get the DRAM Base and
- * Limit values from the DCT.
- */
- pvt->ops->read_dram_base_limit(pvt, dram);
+ for (range = 0; range < DRAM_RANGES; range++) {
+ u8 rw;
- /*
- * Only print out debug info on rows with both R and W Enabled.
- * Normal processing, compiler should optimize this whole 'if'
- * debug output block away.
- */
- if (pvt->dram_rw_en[dram] != 0) {
- debugf1(" DRAM-BASE[%d]: 0x%016llx "
- "DRAM-LIMIT: 0x%016llx\n",
- dram,
- pvt->dram_base[dram],
- pvt->dram_limit[dram]);
-
- debugf1(" IntlvEn=%s %s %s "
- "IntlvSel=%d DstNode=%d\n",
- pvt->dram_IntlvEn[dram] ?
- "Enabled" : "Disabled",
- (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W",
- (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R",
- pvt->dram_IntlvSel[dram],
- pvt->dram_DstNode[dram]);
- }
+ /* read settings for this DRAM range */
+ read_dram_base_limit_regs(pvt, range);
+
+ rw = dram_rw(pvt, range);
+ if (!rw)
+ continue;
+
+ debugf1(" DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n",
+ range,
+ get_dram_base(pvt, range),
+ get_dram_limit(pvt, range));
+
+ debugf1(" IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n",
+ dram_intlv_en(pvt, range) ? "Enabled" : "Disabled",
+ (rw & 0x1) ? "R" : "-",
+ (rw & 0x2) ? "W" : "-",
+ dram_intlv_sel(pvt, range),
+ dram_dst_node(pvt, range));
}
read_dct_base_mask(pvt);
#define K8_REV_F 4
/* Hardware limit on ChipSelect rows per MC and processors per system */
-#define MAX_CS_COUNT 8
-#define DRAM_REG_COUNT 8
+#define NUM_CHIPSELECTS 8
+#define DRAM_RANGES 8
#define ON true
#define OFF false
/*
* Function 1 - Address Map
*/
-#define K8_DRAM_BASE_LOW 0x40
-#define K8_DRAM_LIMIT_LOW 0x44
+#define DRAM_BASE_LO 0x40
+#define DRAM_LIMIT_LO 0x44
+
+#define dram_intlv_en(pvt, i) ((pvt->ranges[i].base.lo >> 8) & 0x7)
+#define dram_rw(pvt, i) (pvt->ranges[i].base.lo & 0x3)
+#define dram_intlv_sel(pvt, i) ((pvt->ranges[i].lim.lo >> 8) & 0x7)
+#define dram_dst_node(pvt, i) (pvt->ranges[i].lim.lo & 0x7)
+
#define K8_DHAR 0xf0
#define DHAR_VALID BIT(0)
#define DCT_CFG_SEL 0x10C
-/* F10 High BASE/LIMIT registers */
-#define F10_DRAM_BASE_HIGH 0x140
-#define F10_DRAM_LIMIT_HIGH 0x144
+#define DRAM_BASE_HI 0x140
+#define DRAM_LIMIT_HI 0x144
/*
u32 bit_map;
};
+/* low and high part of PCI config space regs */
+struct reg_pair {
+ u32 lo, hi;
+};
+
+/*
+ * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
+ */
+struct dram_range {
+ struct reg_pair base;
+ struct reg_pair lim;
+};
+
struct amd64_pvt {
struct low_ops *ops;
u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
- u32 dcsb0[MAX_CS_COUNT];
- u32 dcsb1[MAX_CS_COUNT];
+ u32 dcsb0[NUM_CHIPSELECTS];
+ u32 dcsb1[NUM_CHIPSELECTS];
/* DRAM CS Mask Registers F2x[1,0][6C:60] */
- u32 dcsm0[MAX_CS_COUNT];
- u32 dcsm1[MAX_CS_COUNT];
+ u32 dcsm0[NUM_CHIPSELECTS];
+ u32 dcsm1[NUM_CHIPSELECTS];
- /*
- * Decoded parts of DRAM BASE and LIMIT Registers
- * F1x[78,70,68,60,58,50,48,40]
- */
- u64 dram_base[DRAM_REG_COUNT];
- u64 dram_limit[DRAM_REG_COUNT];
- u8 dram_IntlvSel[DRAM_REG_COUNT];
- u8 dram_IntlvEn[DRAM_REG_COUNT];
- u8 dram_DstNode[DRAM_REG_COUNT];
- u8 dram_rw_en[DRAM_REG_COUNT];
+ /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
+ struct dram_range ranges[DRAM_RANGES];
/*
* The following fields are set at (load) run time, after CPU revision
};
+static inline u64 get_dram_base(struct amd64_pvt *pvt, unsigned i)
+{
+ u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
+
+ if (boot_cpu_data.x86 == 0xf)
+ return addr;
+
+ return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
+}
+
+static inline u64 get_dram_limit(struct amd64_pvt *pvt, unsigned i)
+{
+ u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
+
+ if (boot_cpu_data.x86 == 0xf)
+ return lim;
+
+ return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
+}
+
/*
* per-node ECC settings descriptor
*/
u64 (*get_error_address) (struct mem_ctl_info *mci,
struct err_regs *info);
- void (*read_dram_base_limit) (struct amd64_pvt *pvt, int dram);
void (*read_dram_ctl_register) (struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci,
struct err_regs *info, u64 SystemAddr);
projects / karo-tx-linux.git / commitdiff