data-sheet/users manual to find out the complete list.
+GPIOLIB
+-------
+
+ With the event of the GPIOLIB in drivers/gpio, support for some
+ of the GPIO functions such as reading and writing a pin will
+ be removed in favour of this common access method.
+
+ Once all the extant drivers have been converted, the functions
+ listed below will be removed (they may be marked as __deprecated
+ in the near future).
+
+ - s3c2410_gpio_getpin
+ - s3c2410_gpio_setpin
+
+
Headers
-------
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
+ S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+
+ Support for the S3C2400 and S3C24A0 series are in progress.
- Support for the S3C2400 series is in progress.
Configuration
-------------
Register, kernel and platform data definitions are held in the
arch/arm/mach-s3c2410 directory./include/mach
+arch/arm/plat-s3c24xx:
+
+ Files in here are either common to all the s3c24xx family,
+ or are common to only some of them with names to indicate this
+ status. The files that are not common to all are generally named
+ with the initial cpu they support in the series to ensure a short
+ name without any possibility of confusion with newer devices.
+
+ As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+ with the s3c2443 which does not share many of the same drivers in
+ this directory, the name becomes invalid. We stick to s3c2440-<x>
+ to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+ This does mean that to find the status of any given SoC, a number
+ of directories may need to be searched.
+
Machines
--------
For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
+SD/MMC
+------
+
+ The SD/MMC hardware pre S3C2443 is supported in the current
+ kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+ 1 and 4 bit SD or MMC cards.
+
+ The SDIO behaviour of this driver has not been fully tested. There is no
+ current support for hardware SDIO interrupts.
+
+
Serial
------
The core contains support for manipulating the GPIO, see the
documentation in GPIO.txt in the same directory as this file.
+ Newer kernels carry GPIOLIB, and support is being moved towards
+ this with some of the older support in line to be removed.
+
Clock Management
----------------
it possible to fit quite a lot of data to the flash.
Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
-It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+It does not need stuff like fsck.ext2. UBIFS automatically replays its
journal and recovers from crashes, ensuring that the on-flash data
structures are consistent.
Kernel driver ibmaem
======================
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
Supported systems:
- * Any recent IBM System X server with Active Energy Manager support.
+ * Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Description
-----------
-This driver implements sensor reading support for the energy and power
-meters available on various IBM System X hardware through the BMC. All
-sensor banks will be exported as platform devices; this driver can talk
-to both v1 and v2 interfaces. This driver is completely separate from the
-older ibmpex driver.
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC. All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces. This driver is completely separate from the older ibmpex driver.
-The v1 AEM interface has a simple set of features to monitor energy use.
-There is a register that displays an estimate of raw energy consumption
-since the last BMC reset, and a power sensor that returns average power
-use over a configurable interval.
+The v1 AEM interface has a simple set of features to monitor energy use. There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
-The v2 AEM interface is a bit more sophisticated, being able to present
-a wider range of energy and power use registers, the power cap as
-set by the AEM software, and temperature sensors.
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
Special Features
----------------
-The "power_cap" value displays the current system power cap, as set by
-the Active Energy Manager software. Setting the power cap from the host
-is not currently supported.
+The "power_cap" value displays the current system power cap, as set by the AEM
+software. Setting the power cap from the host is not currently supported.
no delay (0).
Format: integer
+ bootmem_debug [KNL] Enable bootmem allocator debug messages.
+
bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
bttv.radio= Most important insmod options are available as
kernel args too.
+
+1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Sumant Patro
+ Bo Yang
+
+2 Current Version : 00.00.04.01
+3 Older Version : 00.00.03.22
+
+1. Add the new controller (0078, 0079) support to the driver
+ Those controllers are LSI's next generatation(gen2) SAS controllers.
+
+1 Release Date : Mon.June. 23 10:12:45 PST 2008 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Sumant Patro
+ Bo Yang
+
+2 Current Version : 00.00.03.22
+3 Older Version : 00.00.03.20
+
+1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
+2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
+
1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-ice1712
------------------
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-pcsp
-----------------
Module snd-virtuoso
-------------------
- Module for sound cards based on the Asus AV200 chip, i.e.,
- Xonar D2 and Xonar D2X.
+ Module for sound cards based on the Asus AV100/AV200 chips,
+ i.e., Xonar D1, DX, D2 and D2X.
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-vx222
----------------
process that are located on the from nodes to the destination nodes.
Page migration functions are provided by the numactl package by Andi Kleen
(a version later than 0.9.3 is required. Get it from
-ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
-provides an interface similar to other numa functionality for page migration.
-cat /proc/<pid>/numa_maps allows an easy review of where the pages of
-a process are located. See also the numa_maps manpage in the numactl package.
+ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
+which provides an interface similar to other numa functionality for page
+migration. cat /proc/<pid>/numa_maps allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
Manual migration is useful if for example the scheduler has relocated
a process to a processor on a distant node. A batch scheduler or an
L: linux-aio@kvack.org
S: Supported
-ABIT UGURU HARDWARE MONITOR DRIVER
+ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
P: Hans de Goede
M: j.w.r.degoede@hhs.nl
L: lm-sensors@lm-sensors.org
S: Maintained
+ABIT UGURU 3 HARDWARE MONITOR DRIVER
+P: Alistair John Strachan
+M: alistair@devzero.co.uk
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
ACENIC DRIVER
P: Jes Sorensen
M: jes@trained-monkey.org
L: linux-mtd@lists.infradead.org
S: Maintained
-BLUETOOTH SUBSYSTEM
+BLUETOOTH DRIVERS
P: Marcel Holtmann
M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
L: linux-bluetooth@vger.kernel.org
-W: http://bluez.sf.net
-W: http://www.bluez.org
-W: http://www.holtmann.org/linux/bluetooth/
-T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
-S: Maintained
-
-BLUETOOTH RFCOMM LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH BNEP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH CMTP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HIDP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI UART DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH HCI USB DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH HCI BCM203X DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BPA10X DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
+W: http://www.bluez.org/
S: Maintained
-BLUETOOTH HCI BFUSB DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI DTL1 DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BLUECARD DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BT3C DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BTUART DRIVER
+BLUETOOTH SUBSYSTEM
P: Marcel Holtmann
M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI VHCI DRIVER
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
+L: linux-bluetooth@vger.kernel.org
+W: http://www.bluez.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
S: Maintained
BONDING DRIVER
W: http://linux-visws.sf.net
S: Maintained for 2.6.
+SGI GRU DRIVER
+P: Jack Steiner
+M: steiner@sgi.com
+S: Maintained
+
+SGI XP/XPC/XPNET DRIVER
+P: Dean Nelson
+M: dcn@sgi.com
+S: Maintained
+
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
P: Vincent Sanders
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Rotary Wombat
# *DOCUMENTATION*
-piggy.gz
font.c
+piggy.gz
+vmlinux.lds
}
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
if ((dir == DMA_TO_DEVICE) ||
(dir == DMA_BIDIRECTIONAL)) {
BUG_ON(buf->size != size);
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
}
}
-static inline void
-sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
*/
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
* No need to sync the safe buffer - it was allocated
* via the coherent allocators.
*/
+ return 0;
} else {
- dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir);
+ return 1;
}
}
}
}
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+ __func__, dma_addr, offset, size, dir);
- sync_single(dev, dma_addr, size, dir);
+ if (sync_single(dev, dma_addr, offset + size, dir))
+ dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+ __func__, dma_addr, offset, size, dir);
- sync_single(dev, dma_addr, size, dir);
+ if (sync_single(dev, dma_addr, offset + size, dir))
+ dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
EXPORT_SYMBOL(dma_unmap_single);
EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-EXPORT_SYMBOL(dma_sync_single_for_device);
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
#
# SPI RTC drivers
#ifdef __KERNEL__
-#include <linux/mm.h> /* need struct page */
-
+#include <linux/mm_types.h>
#include <linux/scatterlist.h>
#include <asm-generic/dma-coherent.h>
+#include <asm/memory.h>
+
+/*
+ * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
+ * used internally by the DMA-mapping API to provide DMA addresses. They
+ * must not be used by drivers.
+ */
+#ifndef __arch_page_to_dma
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+ return (void *)__bus_to_virt(addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+ return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
+}
+#else
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return __arch_page_to_dma(dev, page);
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+ return __arch_dma_to_virt(dev, addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+ return __arch_virt_to_dma(dev, addr);
+}
+#endif
/*
* DMA-consistent mapping functions. These allocate/free a region of
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
- return virt_to_dma(dev, (unsigned long)cpu_addr);
+ return virt_to_dma(dev, cpu_addr);
}
#else
extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
- return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
+ return dma_map_single(dev, page_address(page) + offset, size, dir);
}
/**
dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
- dma_unmap_single(dev, handle, size, (int)dir);
+ dma_unmap_single(dev, handle, size, dir);
}
/**
/**
- * dma_sync_single_for_cpu
+ * dma_sync_single_range_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @offset: offset of region to start sync
+ * @size: size of region to sync
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Make physical memory consistent for a single streaming mode DMA
* translation after a transfer.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
if (!arch_is_coherent())
- dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+ dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
if (!arch_is_coherent())
- dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+ dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
#else
-extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
#endif
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
/**
* dma_sync_sg_for_cpu
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
#define KEXEC_ARCH KEXEC_ARCH_ARM
#define arch_adjust_zones(node,size,holes) do { } while (0)
#endif
+/*
+ * Amount of memory reserved for the vmalloc() area, and minimum
+ * address for vmalloc mappings.
+ */
+extern unsigned long vmalloc_reserve;
+
+#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
+
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
*/
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-/*
- * Optional device DMA address remapping. Do _not_ use directly!
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#ifndef __arch_page_to_dma
-#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
-#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr))
-#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
-#else
-#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page))
-#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr))
-#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr))
-#endif
-
/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARM_MTD_XIP_H__
static inline void prefetch(const void *ptr)
{
__asm__ __volatile__(
- "pld\t%0"
+ "pld\t%a0"
:
- : "o" (*(char *)ptr)
+ : "p" (ptr)
: "cc");
}
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
* fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ * v7wbi - identical to v6wbi
*/
#undef _TLB
#undef MULTI_TLB
v4wbi_possible_flags | \
fr_possible_flags | \
v4wb_possible_flags | \
- v6wbi_possible_flags)
+ v6wbi_possible_flags | \
+ v7wbi_possible_flags)
#define always_tlb_flags (v3_always_flags & \
v4_always_flags & \
v4wbi_always_flags & \
fr_always_flags & \
v4wb_always_flags & \
- v6wbi_always_flags)
+ v6wbi_always_flags & \
+ v7wbi_always_flags)
#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
+#define __NR_dup3 (__NR_SYSCALL_BASE+358)
+#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
/*
* The following SWIs are ARM private.
--- /dev/null
+vmlinux.lds
/* 250 */ CALL(sys_epoll_create)
CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
- CALL(sys_remap_file_pages)
+ CALL(sys_remap_file_pages)
CALL(sys_ni_syscall) /* sys_set_thread_area */
/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
- CALL(sys_set_tid_address)
+ CALL(sys_set_tid_address)
CALL(sys_timer_create)
CALL(sys_timer_settime)
CALL(sys_timer_gettime)
CALL(sys_fallocate)
CALL(sys_timerfd_settime)
CALL(sys_timerfd_gettime)
+/* 355 */ CALL(sys_signalfd4)
+ CALL(sys_eventfd2)
+ CALL(sys_epoll_create1)
+ CALL(sys_dup3)
+ CALL(sys_pipe2)
+/* 360 */ CALL(sys_inotify_init1)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
cpu_proc_fin();
unsigned int elf_hwcap;
EXPORT_SYMBOL(elf_hwcap);
+unsigned long __initdata vmalloc_reserve = 128 << 20;
+
#ifdef MULTI_CPU
struct processor processor;
}
__early_param("mem=", early_mem);
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+ vmalloc_reserve = memparse(*arg, arg);
+}
+__early_param("vmalloc=", early_vmalloc);
+
/*
* Initial parsing of the command line.
*/
spin_unlock_irqrestore(&undef_lock, flags);
}
+static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+{
+ struct undef_hook *hook;
+ unsigned long flags;
+ int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
+
+ spin_lock_irqsave(&undef_lock, flags);
+ list_for_each_entry(hook, &undef_hook, node)
+ if ((instr & hook->instr_mask) == hook->instr_val &&
+ (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
+ fn = hook->fn;
+ spin_unlock_irqrestore(&undef_lock, flags);
+
+ return fn ? fn(regs, instr) : 1;
+}
+
asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
{
unsigned int correction = thumb_mode(regs) ? 2 : 4;
unsigned int instr;
- struct undef_hook *hook;
siginfo_t info;
void __user *pc;
- unsigned long flags;
/*
* According to the ARM ARM, PC is 2 or 4 bytes ahead,
}
#endif
- spin_lock_irqsave(&undef_lock, flags);
- list_for_each_entry(hook, &undef_hook, node) {
- if ((instr & hook->instr_mask) == hook->instr_val &&
- (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
- if (hook->fn(regs, instr) == 0) {
- spin_unlock_irqrestore(&undef_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&undef_lock, flags);
+ if (call_undef_hook(regs, instr) == 0)
+ return;
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ if (dev->irq >= 255)
+ return -1; /* not a valid interrupt. */
+
if (dev->irq >= 128)
return dev->irq & 0x1f;
*
* Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
*
- * $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* NOTE: This is a multi-hosted header file for use with uHAL and
* supported debuggers.
*
- * $Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
- *
* ***********************************************************************/
#ifndef __address_h
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
#include <asm/page.h>
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
}
+/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info kirkwood_spi_plat_data = {
+ .tclk = KIRKWOOD_TCLK,
+};
+
+static struct resource kirkwood_spi_resources[] = {
+ {
+ .start = SPI_PHYS_BASE,
+ .end = SPI_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_spi = {
+ .name = "orion_spi",
+ .id = 0,
+ .resource = kirkwood_spi_resources,
+ .dev = {
+ .platform_data = &kirkwood_spi_plat_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_spi_resources),
+};
+
+void __init kirkwood_spi_init()
+{
+ platform_device_register(&kirkwood_spi);
+}
+
+
/*****************************************************************************
* UART0
****************************************************************************/
}
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
+ .dram = &kirkwood_mbus_dram_info,
+};
+
+static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK;
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+static struct resource kirkwood_xor0_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = XOR0_PHYS_BASE,
+ .end = XOR0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = XOR0_HIGH_PHYS_BASE,
+ .end = XOR0_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_xor0_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &kirkwood_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_xor0_shared_resources),
+ .resource = kirkwood_xor0_shared_resources,
+};
+
+static struct resource kirkwood_xor00_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_00,
+ .end = IRQ_KIRKWOOD_XOR_00,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor00_data = {
+ .shared = &kirkwood_xor0_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor00_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(kirkwood_xor00_resources),
+ .resource = kirkwood_xor00_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor00_data,
+ },
+};
+
+static struct resource kirkwood_xor01_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_01,
+ .end = IRQ_KIRKWOOD_XOR_01,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor01_data = {
+ .shared = &kirkwood_xor0_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor01_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(kirkwood_xor01_resources),
+ .resource = kirkwood_xor01_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor01_data,
+ },
+};
+
+void __init kirkwood_xor0_init(void)
+{
+ platform_device_register(&kirkwood_xor0_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
+ platform_device_register(&kirkwood_xor00_channel);
+
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
+ platform_device_register(&kirkwood_xor01_channel);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+static struct resource kirkwood_xor1_shared_resources[] = {
+ {
+ .name = "xor 1 low",
+ .start = XOR1_PHYS_BASE,
+ .end = XOR1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 1 high",
+ .start = XOR1_HIGH_PHYS_BASE,
+ .end = XOR1_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_xor1_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &kirkwood_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_xor1_shared_resources),
+ .resource = kirkwood_xor1_shared_resources,
+};
+
+static struct resource kirkwood_xor10_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_10,
+ .end = IRQ_KIRKWOOD_XOR_10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor10_data = {
+ .shared = &kirkwood_xor1_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor10_channel = {
+ .name = MV_XOR_NAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(kirkwood_xor10_resources),
+ .resource = kirkwood_xor10_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor10_data,
+ },
+};
+
+static struct resource kirkwood_xor11_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_11,
+ .end = IRQ_KIRKWOOD_XOR_11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor11_data = {
+ .shared = &kirkwood_xor1_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor11_channel = {
+ .name = MV_XOR_NAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(kirkwood_xor11_resources),
+ .resource = kirkwood_xor11_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor11_data,
+ },
+};
+
+void __init kirkwood_xor1_init(void)
+{
+ platform_device_register(&kirkwood_xor1_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
+ platform_device_register(&kirkwood_xor10_channel);
+
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
+ platform_device_register(&kirkwood_xor11_channel);
+}
+
+
/*****************************************************************************
* Time handling
****************************************************************************/
void kirkwood_pcie_init(void);
void kirkwood_rtc_init(void);
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_spi_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
extern struct sys_timer kirkwood_timer;
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+
#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init kirkwood_init_irq(void)
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
.n_ports = 2,
};
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+ .type = "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &rd88F6192_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
static void __init rd88f6192_init(void)
{
/*
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6192_sata_data);
+ spi_register_board_info(rd88F6192_spi_slave_info,
+ ARRAY_SIZE(rd88F6192_spi_slave_info));
+ kirkwood_spi_init();
kirkwood_uart0_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
}
static int __init rd88f6192_pci_init(void)
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
static struct mtd_partition rd88f6281_nand_parts[] = {
/* ssp.h
- $Id$
written by Marc Singer
6 Dec 2004
/* lcd-panel.h
- $Id$
written by Marc Singer
18 Jul 2005
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/loki.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init loki_init_irq(void)
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <mach/mv78xx0.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init mv78xx0_init_irq(void)
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
struct pcie_port {
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
}
+/*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+static struct resource orion5x_xor_shared_resources[] = {
+ {
+ .name = "xor low",
+ .start = ORION5X_XOR_PHYS_BASE,
+ .end = ORION5X_XOR_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor high",
+ .start = ORION5X_XOR_PHYS_BASE + 0x200,
+ .end = ORION5X_XOR_PHYS_BASE + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion5x_xor_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources),
+ .resource = orion5x_xor_shared_resources,
+};
+
+static u64 orion5x_xor_dmamask = DMA_32BIT_MASK;
+
+static struct resource orion5x_xor0_resources[] = {
+ [0] = {
+ .start = IRQ_ORION5X_XOR0,
+ .end = IRQ_ORION5X_XOR0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data orion5x_xor0_data = {
+ .shared = &orion5x_xor_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor0_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion5x_xor0_resources),
+ .resource = orion5x_xor0_resources,
+ .dev = {
+ .dma_mask = &orion5x_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&orion5x_xor0_data,
+ },
+};
+
+static struct resource orion5x_xor1_resources[] = {
+ [0] = {
+ .start = IRQ_ORION5X_XOR1,
+ .end = IRQ_ORION5X_XOR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data orion5x_xor1_data = {
+ .shared = &orion5x_xor_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor1_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(orion5x_xor1_resources),
+ .resource = orion5x_xor1_resources,
+ .dev = {
+ .dma_mask = &orion5x_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&orion5x_xor1_data,
+ },
+};
+
+void __init orion5x_xor_init(void)
+{
+ platform_device_register(&orion5x_xor_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask);
+ dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask);
+ platform_device_register(&orion5x_xor0_channel);
+
+ dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask);
+ dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask);
+ platform_device_register(&orion5x_xor1_channel);
+}
+
+
/*****************************************************************************
* Time handling
****************************************************************************/
*dev_name = "MV88F5281-D2";
} else if (*rev == MV88F5281_REV_D1) {
*dev_name = "MV88F5281-D1";
+ } else if (*rev == MV88F5281_REV_D0) {
+ *dev_name = "MV88F5281-D0";
} else {
*dev_name = "MV88F5281-Rev-Unsupported";
}
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
+
+ /*
+ * Don't issue "Wait for Interrupt" instruction if we are
+ * running on D0 5281 silicon.
+ */
+ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+ printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+ disable_hlt();
+ }
}
/*
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
/*
* PCIe/PCI functions.
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
#define MV88F5182_REV_A2 2
/* Orion-2 (88F5281) */
#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D0 4
#define MV88F5281_REV_D1 5
#define MV88F5281_REV_D2 6
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
+#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x))
+
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
/*****************************************************************************
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
orion5x_sata_init(&kurobox_pro_sata_data);
orion5x_uart0_init();
orion5x_uart1_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
KUROBOX_PRO_NOR_BOOT_SIZE);
orion5x_i2c_init();
orion5x_sata_init(&mss2_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
platform_device_register(&mss2_nor_flash);
orion5x_i2c_init();
orion5x_sata_init(&mv2120_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
platform_device_register(&mv2120_nor_flash);
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
/*****************************************************************************
orion5x_i2c_init();
orion5x_sata_init(&rd88f5182_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
RD88F5182_NOR_BOOT_SIZE);
static struct gpio_keys_button qnap_ts209_buttons[] = {
{
- .code = KEY_RESTART,
+ .code = KEY_COPY,
.gpio = QNAP_TS209_GPIO_KEY_MEDIA,
.desc = "USB Copy Button",
.active_low = 1,
}, {
- .code = KEY_POWER,
+ .code = KEY_RESTART,
.gpio = QNAP_TS209_GPIO_KEY_RESET,
.desc = "Reset Button",
.active_low = 1,
orion5x_i2c_init();
orion5x_sata_init(&qnap_ts209_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
QNAP_TS209_NOR_BOOT_SIZE);
*
* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
*
+ * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
I2C_BOARD_INFO("s35390a", 0x30),
};
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+ {
+ .name = "ts409:red:sata1",
+ .gpio = 4,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata2",
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata3",
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata4",
+ .gpio = 7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+ .leds = ts409_led_pins,
+ .num_leds = ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts409_led_data,
+ },
+};
+
/****************************************************************************
* GPIO Attached Keys
* Power button is attached to the PIC microcontroller
****************************************************************************/
+#define QNAP_TS409_GPIO_KEY_RESET 14
#define QNAP_TS409_GPIO_KEY_MEDIA 15
static struct gpio_keys_button qnap_ts409_buttons[] = {
{
.code = KEY_RESTART,
+ .gpio = QNAP_TS409_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_COPY,
.gpio = QNAP_TS409_GPIO_KEY_MEDIA,
.desc = "USB Copy Button",
.active_low = 1,
if (qnap_ts409_i2c_rtc.irq == 0)
pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+ platform_device_register(&ts409_leds);
/* register tsx09 specific power-off method */
pm_power_off = qnap_tsx09_power_off;
orion5x_sata_init(&ts78xx_sata_data);
orion5x_uart0_init();
orion5x_uart1_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
TS78XX_NOR_BOOT_SIZE);
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARCH_PXA_MTD_XIP_H__
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
+#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
+
extern struct platform_device poodle_locomo_device;
#endif /* __ASM_ARCH_POODLE_H */
* bits 10-17 : for AC Bias Pin Frequency
* bit 18 : for output enable polarity
* bit 19 : for pixel clock edge
+ * bit 20 : for output pixel format when base is RGBT16
*/
#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 17)
-#define LCD_BIAS_ACTIVE_LOW (1 << 17)
-#define LCD_PCLK_EDGE_RISE (0 << 18)
-#define LCD_PCLK_EDGE_FALL (1 << 18)
+#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
+#define LCD_BIAS_ACTIVE_LOW (1 << 18)
+#define LCD_PCLK_EDGE_RISE (0 << 19)
+#define LCD_PCLK_EDGE_FALL (1 << 19)
+#define LCD_ALTERNATE_MAPPING (1 << 20)
/*
* This structure describes the machine which we are running on.
*/
#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+#define __ASM_ARM_REGS_CLOCK
#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+#define __ASM_ARCH_REGS_GPIO_H
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+#define ___ASM_ARCH_REGS_IRQ_H
/* interrupt controller */
#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+#define ___ASM_ARCH_REGS_LCD_H
#define S3C2410_LCDREG(x) (x)
*/
#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+#define __ASM_ARM_MEMREGS_H
#ifndef S3C2410_MEMREG
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
&bast_sio,
};
-static struct clk *bast_clocks[] = {
+static struct clk *bast_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
* Copyright (C) 2004 by FS Forth-Systeme GmbH
* All rights reserved.
*
- * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $
* @Author: Jonas Dietsche
*
* This program is free software; you can redistribute it and/or
&vr1000_led3,
};
-static struct clk *vr1000_clocks[] = {
+static struct clk *vr1000_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
#include <linux/spi/spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
&anubis_device_sm501,
};
-static struct clk *anubis_clocks[] = {
+static struct clk *anubis_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
&osiris_pcmcia,
};
-static struct clk *osiris_clocks[] = {
+static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
*
* Copyright (C) 2001 Russell King
*
- * $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARCH_SA1100_MTD_XIP_H__
#include <linux/init.h>
#include <asm/cacheflush.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <plat/cache-feroceon-l2.h>
/*
create_mapping(io_desc + i);
}
+static int __init check_membank_valid(struct membank *mb)
+{
+ /*
+ * Check whether this memory region has non-zero size.
+ */
+ if (mb->size == 0)
+ return 0;
+
+ /*
+ * Check whether this memory region would entirely overlap
+ * the vmalloc area.
+ */
+ if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+ "(vmalloc region overlap).\n",
+ mb->start, mb->start + mb->size - 1);
+ return 0;
+ }
+
+ /*
+ * Check whether this memory region would partially overlap
+ * the vmalloc area.
+ */
+ if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
+ phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
+ unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
+
+ printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+ "to -%.8lx (vmalloc region overlap).\n",
+ mb->start, mb->start + mb->size - 1,
+ mb->start + newsize - 1);
+ mb->size = newsize;
+ }
+
+ return 1;
+}
+
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+ int i;
+ int j;
+
+ for (i = 0, j = 0; i < mi->nr_banks; i++) {
+ if (check_membank_valid(&mi->bank[i]))
+ mi->bank[j++] = mi->bank[i];
+ }
+ mi->nr_banks = j;
+}
+
static inline void prepare_page_table(struct meminfo *mi)
{
unsigned long addr;
void *zero_page;
build_mem_type_table();
+ sanity_check_meminfo(mi);
prepare_page_table(mi);
bootmem_init(mi);
devicemaps_init(mdesc);
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
#define CACHE_DLINESIZE 16
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
/*
* ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
(dma_addr_t)virt_to_lbus(page_address(page)) : \
(dma_addr_t)__virt_to_bus(page_address(page));})
-#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \
- virt_to_lbus(addr) : \
- __virt_to_bus(addr);})
+#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __bus_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
+ (dma_addr_t) (is_lbus_device(dev) ? \
+ virt_to_lbus(__addr) : \
+ __virt_to_bus(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
/*
- * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
*
* Copyright (C) 2008 Marvell Semiconductor
*
/*
- * include/asm-arm/plat-orion/ehci-orion.h
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_EHCI_ORION_H
-#define __ASM_PLAT_ORION_EHCI_ORION_H
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
#include <linux/mbus.h>
/*
- * include/asm-arm/plat-orion/irq.h
+ * arch/arm/plat-orion/include/plat/irq.h
*
* Marvell Orion SoC IRQ handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_IRQ_H
-#define __ASM_PLAT_ORION_IRQ_H
+#ifndef __PLAT_IRQ_H
+#define __PLAT_IRQ_H
void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
/*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
* Marvell XOR platform device data definition file.
*/
-#ifndef __ASM_PLAT_ORION_MV_XOR_H
-#define __ASM_PLAT_ORION_MV_XOR_H
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
#include <linux/dmaengine.h>
#include <linux/mbus.h>
/*
- * include/asm-arm/plat-orion/orion_nand.h
+ * arch/arm/plat-orion/include/plat/orion_nand.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_ORION_NAND_H
-#define __ASM_PLAT_ORION_ORION_NAND_H
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
/*
* Device bus NAND private data
/*
- * include/asm-arm/plat-orion/pcie.h
+ * arch/arm/plat-orion/include/plat/pcie.h
*
* Marvell Orion SoC PCIe handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_PCIE_H
-#define __ASM_PLAT_ORION_PCIE_H
+#ifndef __PLAT_PCIE_H
+#define __PLAT_PCIE_H
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
/*
- * include/asm-arm/plat-orion/time.h
+ * arch/arm/plat-orion/include/plat/time.h
*
* Marvell Orion SoC time handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_TIME_H
-#define __ASM_PLAT_ORION_TIME_H
+#ifndef __PLAT_TIME_H
+#define __PLAT_TIME_H
void orion_time_init(unsigned int irq, unsigned int tclk);
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
static void orion_irq_mask(u32 irq)
{
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
/*
* PCIe unit register offsets.
IODESC_ENT(UART)
};
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
{
struct cpu_table *tab;
int count;
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Jul 13 12:04:05 2008
+# Last update: Wed Aug 13 21:56:02 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
gecko MACH_GECKO GECKO 832
ds101 MACH_DS101 DS101 833
omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834
-xscale_palmld MACH_XSCALE_PALMLD XSCALE_PALMLD 835
+palmld MACH_PALMLD PALMLD 835
cc9c MACH_CC9C CC9C 836
sbc1670 MACH_SBC1670 SBC1670 837
ixdp28x5 MACH_IXDP28X5 IXDP28X5 838
arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841
osiris MACH_OSIRIS OSIRIS 842
maestro MACH_MAESTRO MAESTRO 843
-tunge2 MACH_TUNGE2 TUNGE2 844
+palmte2 MACH_PALMTE2 PALMTE2 844
ixbbm MACH_IXBBM IXBBM 845
mx27ads MACH_MX27ADS MX27ADS 846
ax8004 MACH_AX8004 AX8004 847
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmtreo650 MACH_PALMTREO650 PALMTREO650 909
+palmt650 MACH_PALMT650 PALMT650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
multmdw MACH_MULTMDW MULTMDW 1087
mba2440 MACH_MBA2440 MBA2440 1088
ecsd MACH_ECSD ECSD 1089
-zire31 MACH_ZIRE31 ZIRE31 1090
+palmz31 MACH_PALMZ31 PALMZ31 1090
fsg MACH_FSG FSG 1091
razor101 MACH_RAZOR101 RAZOR101 1092
opera_tdm MACH_OPERA_TDM OPERA_TDM 1093
pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
-gprisc4 MACH_GPRISC4 GPRISC4 1823
+gprisc3 MACH_GPRISC4 GPRISC4 1823
stamp9260 MACH_STAMP9260 STAMP9260 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
+adx_rmu MACH_ADX_RMU ADX_RMU 1833
+xg_cpe_main MACH_XG_CPE_MAIN XG_CPE_MAIN 1834
+edb9407a MACH_EDB9407A EDB9407A 1835
+dtb9608 MACH_DTB9608 DTB9608 1836
+em104v1 MACH_EM104V1 EM104V1 1837
+demo MACH_DEMO DEMO 1838
+logi9260 MACH_LOGI9260 LOGI9260 1839
+mx31_exm32 MACH_MX31_EXM32 MX31_EXM32 1840
+usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841
+picproje2008 MACH_PICPROJE2008 PICPROJE2008 1842
+cs_e9315 MACH_CS_E9315 CS_E9315 1843
+qil_a9g20 MACH_QIL_A9G20 QIL_A9G20 1844
+sha_pon020 MACH_SHA_PON020 SHA_PON020 1845
+nad MACH_NAD NAD 1846
+sbc35_a9260 MACH_SBC35_A9260 SBC35_A9260 1847
+sbc35_a9g20 MACH_SBC35_A9G20 SBC35_A9G20 1848
+davinci_beginning MACH_DAVINCI_BEGINNING DAVINCI_BEGINNING 1849
+uwc MACH_UWC UWC 1850
+mxlads MACH_MXLADS MXLADS 1851
+htcnike MACH_HTCNIKE HTCNIKE 1852
+deister_pxa270 MACH_DEISTER_PXA270 DEISTER_PXA270 1853
+cme9210js MACH_CME9210JS CME9210JS 1854
+cc9p9360 MACH_CC9P9360 CC9P9360 1855
+mocha MACH_MOCHA MOCHA 1856
+wapd170ag MACH_WAPD170AG WAPD170AG 1857
+linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858
+afeb9260 MACH_AFEB9260 AFEB9260 1859
+w90x900 MACH_W90X900 W90X900 1860
+w90x700 MACH_W90X700 W90X700 1861
+kt300ip MACH_KT300IP KT300IP 1862
+kt300ip_g20 MACH_KT300IP_G20 KT300IP_G20 1863
+srcm MACH_SRCM SRCM 1864
+wlnx_9260 MACH_WLNX_9260 WLNX_9260 1865
+openmoko_gta03 MACH_OPENMOKO_GTA03 OPENMOKO_GTA03 1866
+osprey2 MACH_OSPREY2 OSPREY2 1867
+kbio9260 MACH_KBIO9260 KBIO9260 1868
+ginza MACH_GINZA GINZA 1869
+a636n MACH_A636N A636N 1870
+imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871
+nenoc MACH_NEMOC NEMOC 1872
+geneva MACH_GENEVA GENEVA 1873
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
default y
source "arch/blackfin/mach-bf527/Kconfig"
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if H8606_HVSISTEMAS
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+ bool "ins[bwl] low overhead, higher interrupt latency"
+ default y
+ help
+ Reads on the Blackfin are speculative. In Blackfin terms, this means
+ they can be interrupted at any time (even after they have been issued
+ on to the external bus), and re-issued after the interrupt occurs.
+ For memory - this is not a big deal, since memory does not change if
+ it sees a read.
+
+ If a FIFO is sitting on the end of the read, it will see two reads,
+ when the core only sees one since the FIFO receives both the read
+ which is cancelled (and not delivered to the core) and the one which
+ is re-issued (which is delivered to the core).
+
+ To solve this, interrupts are turned off before reads occur to
+ I/O space. This option controls which the overhead/latency of
+ controlling interrupts during this time
+ "n" turns interrupts off every read
+ (higher overhead, but lower interrupt latency)
+ "y" turns interrupts off every loop
+ (low overhead, but longer interrupt latency)
+
+ default behavior is to leave this set to on (type "Y"). If you are experiencing
+ interrupt latency issues, it is safe and OK to turn this off.
+
endmenu
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
depends on PM
-config PM_BFIN_WAKE_RTC
- bool "Allow Wake-Up from RESET and on-chip RTC"
- depends on PM
- default n
- help
- Enable RTC Wake-Up (Voltage Regulator Power-Up)
-
config PM_BFIN_WAKE_PH6
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
depends on PM && (BF52x || BF534 || BF536 || BF537)
help
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
-config PM_BFIN_WAKE_CAN
- bool "Allow Wake-Up from on-chip CAN0/1"
- depends on PM && (BF54x || BF534 || BF536 || BF537)
- default n
- help
- Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
-
config PM_BFIN_WAKE_GP
bool "Allow Wake-Up from GPIOs"
depends on PM && BF54x
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_USB
- bool "Allow Wake-Up from on-chip USB"
- depends on PM && (BF54x || BF52x)
- default n
- help
- Enable USB Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_KEYPAD
- bool "Allow Wake-Up from on-chip Keypad"
- depends on PM && BF54x
- default n
- help
- Enable Keypad Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_ROTARY
- bool "Allow Wake-Up from on-chip Rotary"
- depends on PM && BF54x
- default n
- help
- Enable Rotary Wake-Up (Voltage Regulator Power-Up)
-
endmenu
menu "CPU Frequency scaling"
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
+CONFIG_BLACKSTAMP=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+# CONFIG_PLL_BYPASS is not set
+# CONFIG_CLKIN_HALF is not set
+CONFIG_VCO_MULT=16
+CONFIG_CCLK_DIV_1=y
+# CONFIG_CCLK_DIV_2 is not set
+# CONFIG_CCLK_DIV_4 is not set
+# CONFIG_CCLK_DIV_8 is not set
+CONFIG_SCLK_DIV=3
+CONFIG_MAX_MEM_SIZE=64
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+# CONFIG_RAMKERNEL is not set
+CONFIG_ROMKERNEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# Possible Suspend Mem / Hibernate Wake-Up Sources
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+CONFIG_BF5xx_PPI=y
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Thu Jul 31 00:53:15 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=32
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#include <asm/cplbinit.h>
#if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
{
unsigned long ctrl;
int i;
#endif
#if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
{
unsigned long ctrl;
int i;
#include <asm/cplbinit.h>
#if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
{
unsigned long *table = icplb_table;
unsigned long ctrl;
#endif
#if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
{
unsigned long *table = dcplb_table;
unsigned long ctrl;
.name = "Asynchronous Memory Banks",
},
{
-#ifdef L2_START
.start = L2_START,
.end = L2_START + L2_LENGTH,
.psize = SIZE_1M,
.attr = SWITCH_T | I_CPLB | D_CPLB,
.i_conf = L2_MEMORY,
.d_conf = L2_MEMORY,
- .valid = 1,
-#else
- .valid = 0,
-#endif
+ .valid = (L2_LENGTH > 0),
.name = "L2 Memory",
},
{
#endif
char __initdata command_line[COMMAND_LINE_SIZE];
+unsigned int __initdata *__retx;
/* boot memmap, for parsing "memmap=" */
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
l1_data_a_length, l1_data_b_length);
-#ifdef L2_LENGTH
- l2_length = _ebss_l2 - _stext_l2;
- if (l2_length > L2_LENGTH)
- panic("L2 SRAM Overflow\n");
+ if (L2_LENGTH != 0) {
+ l2_length = _ebss_l2 - _stext_l2;
+ if (l2_length > L2_LENGTH)
+ panic("L2 SRAM Overflow\n");
- /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
- dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
-#endif
+ /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+ dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+ }
}
/* add_memory_region to memmap */
memory_setup();
+ /* Initialize Async memory banks */
+ bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+ bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+ bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+ bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+ bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+ bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
cclk = get_cclk();
sclk = get_sclk();
bfin_write_SWRST(DOUBLE_FAULT);
if (_bfin_swrst & RESET_DOUBLE)
- printk(KERN_INFO "Recovering from Double Fault event\n");
+ /*
+ * don't decode the address, since you don't know if this
+ * kernel's symbol map is the same as the crashing kernel
+ */
+ printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
else if (_bfin_swrst & RESET_WDOG)
printk(KERN_INFO "Recovering from Watchdog event\n");
else if (_bfin_swrst & RESET_SOFTWARE)
dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
BFIN_DLINES);
#ifdef CONFIG_BFIN_ICACHE_LOCK
- switch (read_iloc()) {
+ switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
break;
* we don't read something in the async space that can hang forever
*/
if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#ifdef L2_START
+#if L2_LENGTH != 0
(addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
#endif
(addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
return false;
}
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * These are the normal instructions which cause change of flow, which
+ * would be at the source of the trace buffer
+ */
+void decode_instruction(unsigned short *address)
+{
+ unsigned short opcode;
+
+ if (get_instruction(&opcode, address)) {
+ if (opcode == 0x0010)
+ printk("RTS");
+ else if (opcode == 0x0011)
+ printk("RTI");
+ else if (opcode == 0x0012)
+ printk("RTX");
+ else if (opcode >= 0x0050 && opcode <= 0x0057)
+ printk("JUMP (P%i)", opcode & 7);
+ else if (opcode >= 0x0060 && opcode <= 0x0067)
+ printk("CALL (P%i)", opcode & 7);
+ else if (opcode >= 0x0070 && opcode <= 0x0077)
+ printk("CALL (PC+P%i)", opcode & 7);
+ else if (opcode >= 0x0080 && opcode <= 0x0087)
+ printk("JUMP (PC+P%i)", opcode & 7);
+ else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+ printk("IF !CC JUMP");
+ else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+ printk("IF CC JUMP");
+ else if (opcode >= 0x2000 && opcode <= 0x2fff)
+ printk("JUMP.S");
+ else if (opcode >= 0xe080 && opcode <= 0xe0ff)
+ printk("LSETUP");
+ else if (opcode >= 0xe200 && opcode <= 0xe2ff)
+ printk("JUMP.L");
+ else if (opcode >= 0xe300 && opcode <= 0xe3ff)
+ printk("CALL pcrel");
+ else
+ printk("0x%04x", opcode);
+ }
+
+}
+
void dump_bfin_trace_buffer(void)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
char buf[150];
- unsigned short val = 0, *addr;
+ unsigned short *addr;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
printk(KERN_NOTICE "Hardware Trace:\n");
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
decode_address(buf, (unsigned long)bfin_read_TBUF());
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
printk(KERN_NOTICE " Source : %s ", buf);
- if (get_instruction(&val, addr)) {
- if (val == 0x0010)
- printk("RTS");
- else if (val == 0x0011)
- printk("RTI");
- else if (val == 0x0012)
- printk("RTX");
- else if (val >= 0x0050 && val <= 0x0057)
- printk("JUMP (P%i)", val & 7);
- else if (val >= 0x0060 && val <= 0x0067)
- printk("CALL (P%i)", val & 7);
- else if (val >= 0x0070 && val <= 0x0077)
- printk("CALL (PC+P%i)", val & 7);
- else if (val >= 0x0080 && val <= 0x0087)
- printk("JUMP (PC+P%i)", val & 7);
- else if ((val >= 0x1000 && val <= 0x13FF) ||
- (val >= 0x1800 && val <= 0x1BFF))
- printk("IF !CC JUMP");
- else if ((val >= 0x1400 && val <= 0x17ff) ||
- (val >= 0x1c00 && val <= 0x1fff))
- printk("IF CC JUMP");
- else if (val >= 0x2000 && val <= 0x2fff)
- printk("JUMP.S");
- else if (val >= 0xe080 && val <= 0xe0ff)
- printk("LSETUP");
- else if (val >= 0xe200 && val <= 0xe2ff)
- printk("JUMP.L");
- else if (val >= 0xe300 && val <= 0xe3ff)
- printk("CALL pcrel");
- else
- printk("0x%04x", val);
- }
+ decode_instruction(addr);
printk("\n");
}
}
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
if (trace_buff_offset)
- index = trace_buff_offset/4 - 1;
+ index = trace_buff_offset / 4;
else
index = EXPAND_LEN;
if (index < 0 )
index = EXPAND_LEN;
decode_address(buf, software_trace_buff[index]);
- printk(KERN_NOTICE " Source : %s\n", buf);
+ printk(KERN_NOTICE " Source : %s ", buf);
+ decode_instruction((unsigned short *)software_trace_buff[index]);
+ printk("\n");
index -= 1;
if (index < 0)
index = EXPAND_LEN;
#if !L1_DATA_B_LENGTH
*(.l1.bss.B)
#endif
+ . = ALIGN(4);
___bss_stop = .;
}
#if !L1_DATA_B_LENGTH
*(.l1.data.B)
#endif
-#ifndef L2_LENGTH
+#if !L2_LENGTH
. = ALIGN(32);
*(.data_l2.cacheline_aligned)
*(.l2.data)
__ebss_b_l1 = .;
}
-#ifdef L2_LENGTH
__l2_lma_start = .;
.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
{
. = ALIGN(4);
__stext_l2 = .;
- *(.l1.text)
+ *(.l2.text)
. = ALIGN(4);
__etext_l2 = .;
. = ALIGN(4);
__sdata_l2 = .;
- *(.l1.data)
+ *(.l2.data)
__edata_l2 = .;
. = ALIGN(32);
. = ALIGN(4);
__sbss_l2 = .;
- *(.l1.bss)
+ *(.l2.bss)
. = ALIGN(4);
__ebss_l2 = .;
}
-#endif
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
.align 2
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ * - turns interrupts off every read (higher overhead, but lower latency)
+ * - turns interrupts off every loop (low overhead, but longer latency)
+ * - DMA version, which do not suffer from this issue. DMA versions have
+ * different name (prefixed by dma_ ), and are located in
+ * ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
ENTRY(_insl)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Llong_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = [P0];
+ [P1++] = R0;
+.Llong_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insl)
ENTRY(_insw)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lword_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = W[P0];
+ W[P1++] = R0;
+.Lword_loop_e:
+ STI R3;
+ RTS;
+
+#endif
ENDPROC(_insw)
ENTRY(_insw_8)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lword8_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = W[P0];
+ B[P1++] = R0;
+ R0 = R0 >> 8;
+ B[P1++] = R0;
+ NOP;
+.Lword8_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insw_8)
ENTRY(_insb)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lbyte_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = B[P0];
+ B[P1++] = R0;
+.Lbyte_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insb)
ENTRY(_insl_16)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Llong16_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = [P0];
+ W[P1++] = R0;
+ R0 = R0 >> 16;
+ W[P1++] = R0;
+.Llong16_loop_e:
+ STI R3;
+ RTS;
+#endif
ENDPROC(_insl_16)
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/pata_platform.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
-
-#if defined(CONFIG_BF527)
- p0.h = hi(EMAC_SYSTAT);
- p0.l = lo(EMAC_SYSTAT);
- R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
- R0.l = 0xFFFF;
- [P0] = R0;
- SSYNC;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(UART1_LCR);
- p0.l = lo(UART1_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(UART1_DLL);
- p0.l = lo(UART1_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART1_DLH);
- p0.l = lo(UART1_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART1_GCTL);
- p0.l = lo(UART1_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00060000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0x100000,
.offset = 0x60000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x6a0000,
.offset = 0x00160000,
}
help
BF533-STAMP board support.
+config BLACKSTAMP
+ bool "BlackStamp"
+ help
+ Support for the BlackStamp board. Hardware info available at
+ http://blackfin.uclinux.org/gf/project/blackstamp/
+
config BFIN533_BLUETECHNIX_CM
bool "Bluetechnix CM-BF533"
depends on (BF533)
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP) += blackstamp.o
obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf533/blackstamp.c
+ * Based on: arch/blackfin/mach-bf533/stamp.c
+ * Author: Benjamin Matthews <bmat@lle.rochester.edu>
+ * Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2008
+ * Description: Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF3,
+ .end = IRQ_PF3,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = 0x180000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(spi)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. */
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 7,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+ {BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = 8,
+ .scl_pin = 9,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .udelay = 40,
+}; /* This hasn't actually been used these pins
+ * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c_gpio_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+ &i2c_gpio_device,
+#endif
+
+ &bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+ ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+ if (ret < 0)
+ return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+ bfin_write_FIO_FLAG_S(PF0);
+ SSYNC();
+#endif
+
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ return 0;
+}
+
+arch_initcall(blackstamp_init);
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 38
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 2,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x2030C000,
- .end = 0x2030C01F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2030D018,
- .end = 0x2030D01B,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_085, 250000000),
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
};
static int __init cm_bf533_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sir_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <asm/dma.h>
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0xE0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- p0.h = hi(FIO_MASKA_C);
- p0.l = lo(FIO_MASKA_C);
- r0 = 0xFFFF(Z);
- w[p0] = r0.L; /* Disable all interrupts */
- ssync;
-
- p0.h = hi(FIO_MASKB_C);
- p0.l = lo(FIO_MASKB_C);
- r0 = 0xFFFF(Z);
- w[p0] = r0.L; /* Disable all interrupts */
- ssync;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
help
CM-BF537 support for EVAL- and DEV-Board.
+config BFIN537_BLUETECHNIX_TCM
+ bool "Bluetechnix TCM-BF537"
+ depends on (BF537)
+ help
+ TCM-BF537 support for EVAL- and DEV-Board.
+
config PNAV10
bool "PNAV board"
depends on (BF537)
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0xE0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+ .width = 2,
+ .parts = cm_partitions,
+ .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+ {
+ .name = "cfi_probe",
+ .start = 0x20000000,
+ .end = 0x201fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = (unsigned long)cm_flash_gpios,
+ .end = ARRAY_SIZE(cm_flash_gpios),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device cm_flash_device = {
+ .name = "gpio-addr-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cm_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(cm_flash_resource),
+ .resource = cm_flash_resource,
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 64
+#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 2,
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
&bfin_pata_device,
#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+ &cm_flash_device,
+#endif
};
static int __init cm_bf537_init(void)
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
};
static int __init stamp_init(void)
ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "uboot",
+ .name = "bootloader(spi)",
.size = PSIZE_UBOOT,
.offset = 0x000000,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "initramfs",
+ .name = "initramfs(spi)",
.size = PSIZE_INITRAMFS,
.offset = PSIZE_UBOOT
}, {
- .name = "opt",
+ .name = "opt(spi)",
.size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
.offset = PSIZE_UBOOT + PSIZE_INITRAMFS,
}
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
- .name = "linux kernel",
+ .name = "linux kernel(nand)",
.size = 0x400000,
.offset = 0,
}, {
- .name = "file system",
+ .name = "file system(nand)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0xE0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "MAC Address",
+ .name = "MAC Address(nor)",
.size = MTDPART_SIZ_FULL,
.offset = 0x3F0000,
.mask_flags = MTD_WRITEABLE,
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c
+ * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = 0xe0000,
+ .offset = 0x20000
+ }, {
+ .name = "file system(spi)",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+ .name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF14,
+ .end = IRQ_PF14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PG15,
+ .end = IRQ_PG15,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20200000,
+ .end = 0x20200000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PH14,
+ .end = IRQ_PH14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0xE0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+ .width = 2,
+ .parts = cm_partitions,
+ .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+ {
+ .name = "cfi_probe",
+ .start = 0x20000000,
+ .end = 0x201fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = (unsigned long)cm_flash_gpios,
+ .end = ARRAY_SIZE(cm_flash_gpios),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device cm_flash_device = {
+ .name = "gpio-addr-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cm_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(cm_flash_resource),
+ .resource = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+ &hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+ &cm_flash_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+ platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise General-Purpose I/O Modules on BF537 */
- /* Rev 0.0 Anomaly 05000212 - PORTx_FER,
- * PORT_MUX Registers Do Not accept "writes" correctly:
- */
- p0.h = hi(BFIN_PORT_MUX);
- p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- W[P0] = R0.L; /* Enable both UARTS */
- SSYNC;
-
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = 0x000F(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- /* Enable peripheral function of PORTF for UART0 and UART1 */
- W[P0] = R0.L;
- SSYNC;
-
-#if !defined(CONFIG_BF534)
- p0.h = hi(EMAC_SYSTAT);
- p0.l = lo(EMAC_SYSTAT);
- R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
- R0.l = 0xFFFF;
- [P0] = R0;
- SSYNC;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = 4 * SIZE_1M,
.size = (256 - 4) * SIZE_1M,
},
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = 0x1c0000,
.offset = 0x40000
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers*/
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers*/
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
- [p0] = R0;
- SSYNC;
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
- [p0] = R0;
- SSYNC;
-
- /* Initialize stack pointer */
- SP.L = LO(INITIAL_STACK);
- SP.H = HI(INITIAL_STACK);
- FP = SP;
- USP = SP;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_MBSCTL);
- p2.l = lo(EBIU_MBSCTL);
- r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
- r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_MODE);
- p2.l = lo(EBIU_MODE);
- r0.h = hi(CONFIG_EBIU_MODEVAL);
- r0.l = lo(CONFIG_EBIU_MODEVAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_FCTL);
- p2.l = lo(EBIU_FCTL);
- r0.h = hi(CONFIG_EBIU_FCTLVAL);
- r0.l = lo(CONFIG_EBIU_FCTLVAL);
- [p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop;
- nop;
- nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- call _start_kernel;
-.L_exit:
- jump.s .L_exit;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
SSYNC;
#endif
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 119
+#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 2,
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/ata_platform.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#endif
};
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sir_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOGA_CTL);
- p0.h = hi(WDOGA_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
p0.h = hi(SICA_IWR0);
p0.l = lo(SICA_IWR0);
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#
obj-y := \
- cache.o cacheinit.o entry.o \
- interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
+ cache.o entry.o head.o \
+ interrupt.o irqpanic.o arch_checks.o ints-priority.o
+obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
obj-$(CONFIG_PM) += pm.o dpmc_modes.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <asm/fixed_code.h>
#include <asm/mach/anomaly.h>
#include <asm/mach-common/clocks.h>
# endif
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
+#endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
+#endif
#include <asm/cache.h>
.text
-.align 2
-ENTRY(_cache_invalidate)
-
- /*
- * Icache or DcacheA or DcacheB Invalidation
- * or any combination thereof
- * R0 has bits
- * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
- * set as required
- */
- [--SP] = R7;
-
- R7 = R0;
- CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
- IF !CC JUMP .Lno_icache;
- [--SP] = RETS;
- CALL _icache_invalidate;
- RETS = [SP++];
-.Lno_icache:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
- IF !CC JUMP .Lno_dcache_a;
- R0 = 0; /* specifies bank A */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_a:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
- IF !CC JUMP .Lno_dcache_b;
- R0 = 0;
- BITSET(R0, 23); /* specifies bank B */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_b:
- R7 = [SP++];
- RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
- [--SP] = ( R7:5);
-
- P0.L = LO(IMEM_CONTROL);
- P0.H = HI(IMEM_CONTROL);
- R7 = [P0];
-
- /* Clear the IMC bit , All valid bits in the instruction
- * cache are set to the invalid state
- */
- BITCLR(R7,IMC_P);
- CLI R6;
- SSYNC; /* SSYNC required before invalidating cache. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the instruction cache agian */
- R6 = (IMC | ENICPLB);
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:5) = [SP++];
- RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)
/*
* blackfin_cache_flush_range(start, end)
RTS;
ENDPROC(_blackfin_dcache_invalidate_range)
-/* Invalidate the Entire Data cache by
- * clearing DMC[1:0] bits
- */
-ENTRY(_invalidate_entire_dcache)
-ENTRY(_dcache_invalidate)
- [--SP] = ( R7:6);
-
- P0.L = LO(DMEM_CONTROL);
- P0.H = HI(DMEM_CONTROL);
- R7 = [P0];
-
- /* Clear the DMC[1:0] bits, All valid bits in the data
- * cache are set to the invalid state
- */
- BITCLR(R7,DMC0_P);
- BITCLR(R7,DMC1_P);
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the data cache again */
-
- R6 = DMEM_CNTR;
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:6) = [SP++];
- RTS;
-ENDPROC(_dcache_invalidate)
-ENDPROC(_invalidate_entire_dcache)
-
ENTRY(_blackfin_dcache_flush_range)
R2 = -L1_CACHE_BYTES;
R2 = R0 & R2;
+++ /dev/null
-/*
- * File: arch/blackfin/mach-common/cacheinit.S
- * Based on:
- * Author: LG Soft India
- *
- * Created: ?
- * Description: cache initialization
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* This function sets up the data and instruction cache. The
- * tables like icplb table, dcplb table and Page Descriptor table
- * are defined in cplbtab.h. You can configure those tables for
- * your suitable requirements
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-#if ANOMALY_05000125
-#if defined(CONFIG_BFIN_ICACHE)
-ENTRY(_bfin_write_IMEM_CONTROL)
-
- /* Enable Instruction Cache */
- P0.l = LO(IMEM_CONTROL);
- P0.h = HI(IMEM_CONTROL);
-
- /* Anomaly 05000125 */
- CLI R1;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R0;
- SSYNC;
- STI R1;
- RTS;
-
-ENDPROC(_bfin_write_IMEM_CONTROL)
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-ENTRY(_bfin_write_DMEM_CONTROL)
- P0.l = LO(DMEM_CONTROL);
- P0.h = HI(DMEM_CONTROL);
-
- CLI R1;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R0;
- SSYNC;
- STI R1;
- RTS;
-
-ENDPROC(_bfin_write_DMEM_CONTROL)
-#endif
-
-#endif
jump .Lforever;
ENDPROC(_hibernate_mode)
-ENTRY(_deep_sleep)
- [--SP] = ( R7:0, P5:0 );
- [--SP] = RETS;
-
- CLI R4;
-
- R0 = IWR_ENABLE(0);
- R1 = IWR_DISABLE_ALL;
- R2 = IWR_DISABLE_ALL;
-
- call _set_sic_iwr;
-
- call _set_dram_srfs;
-
- /* Clear all the interrupts,bits sticky */
- R0 = 0xFFFF (Z);
- call _set_rtc_istat
-
- P0.H = hi(PLL_CTL);
- P0.L = lo(PLL_CTL);
- R0 = W[P0](z);
- BITSET (R0, 5);
- W[P0] = R0.L;
-
- call _test_pll_locked;
-
- SSYNC;
- IDLE;
-
- call _unset_dram_srfs;
-
- call _test_pll_locked;
-
- R0 = IWR_ENABLE(0);
- R1 = IWR_DISABLE_ALL;
- R2 = IWR_DISABLE_ALL;
-
- call _set_sic_iwr;
-
- P0.H = hi(PLL_CTL);
- P0.L = lo(PLL_CTL);
- R0 = w[p0](z);
- BITCLR (R0, 3);
- BITCLR (R0, 5);
- BITCLR (R0, 8);
- w[p0] = R0;
- IDLE;
- call _test_pll_locked;
-
- STI R4;
-
- RETS = [SP++];
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-ENDPROC(_deep_sleep)
-
ENTRY(_sleep_deeper)
[--SP] = ( R7:0, P5:0 );
[--SP] = RETS;
cc = r7 == r6;
if cc jump _bfin_return_from_exception;
+#ifdef CONFIG_KGDB
/* Don't do single step in hardware exception handler */
p5.l = lo(IPEND);
p5.h = hi(IPEND);
r6 = [p5];
+ cc = bittst(r6, 4);
+ if cc jump _bfin_return_from_exception;
cc = bittst(r6, 5);
if cc jump _bfin_return_from_exception;
-#ifdef CONFIG_KGDB
/* skip single step if current interrupt priority is higher than
* that of the first instruction, from which gdb starts single step */
r6 >>= 6;
if cc jump .Ldo_single_step;
r6 += -1;
cc = r6 < r7;
- if cc jump _bfin_return_from_exception;
+ if cc jump 1f;
.Ldo_single_step:
-#endif
-
+#else
/* If we were in user mode, do the single step normally. */
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
r6 = [p5];
r7 = 0xffe0 (z);
r7 = r7 & r6;
cc = r7 == 0;
- if cc jump 1f;
+ if !cc jump 1f;
+#endif
+ /* Single stepping only a single instruction, so clear the trace
+ * bit here. */
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+ jump _ex_trap_c;
+
+1:
/*
* We were in an interrupt handler. By convention, all of them save
* SYSCFG with their first instruction, so by checking whether our
cc = R7 == R6;
if !cc jump _bfin_return_from_exception;
-1:
- /* Single stepping only a single instruction, so clear the trace
- * bit here. */
r7 = syscfg;
bitclr (r7, 0);
syscfg = R7;
- jump _ex_trap_c;
-
+ /* Fall through to _bfin_return_from_exception. */
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
.long _sys_semtimedop
.long _sys_timerfd_settime
.long _sys_timerfd_gettime
+ .long _sys_signalfd4 /* 360 */
+ .long _sys_eventfd2
+ .long _sys_epoll_create1
+ .long _sys_dup3
+ .long _sys_pipe2
+ .long _sys_inotify_init1 /* 365 */
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
--- /dev/null
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+
+__INIT
+
+#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(__start)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
+ R0 = 0;
+
+ /* Clear Out All the data and pointer Registers */
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers */
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ trace_buffer_init(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
+ /* Turn off the icache */
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Turn off the dcache */
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Save RETX, in case of doublefault */
+ p0.l = ___retx;
+ p0.h = ___retx;
+ R0 = RETX;
+ [P0] = R0;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+ call _init_early_exception_vectors;
+#endif
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if ANOMALY_05000281
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+ /* Enable nested interrupts */
+ [--sp] = reti;
+
+ /* watchdog off for now */
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0;
+ ssync;
+
+ /* Zero out the bss region
+ * Note: this will fail if bss is 0 bytes ...
+ */
+ r0 = 0 (z);
+ r1.l = ___bss_start;
+ r1.h = ___bss_start;
+ r2.l = ___bss_stop;
+ r2.h = ___bss_stop;
+ r2 = r2 - r1;
+ r2 >>= 2;
+ p1 = r1;
+ p2 = r2;
+ lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+ [p1++] = r0;
+
+ /* In case there is a NULL pointer reference,
+ * zero out region before stext
+ */
+ p1 = r0;
+ r2.l = __stext;
+ r2.h = __stext;
+ r2 >>= 2;
+ p2 = r2;
+ lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+ [p1++] = r0;
+
+ /* Pass the u-boot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ /* Load the current thread pointer and stack */
+ sp.l = _init_thread_union;
+ sp.h = _init_thread_union;
+ p1 = THREAD_SIZE (z);
+ sp = sp + p1;
+ usp = sp;
+ fp = sp;
+ jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
#ifdef CONFIG_PM
unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
#endif
struct ivgx {
#ifdef CONFIG_PM
int bfin_internal_set_wake(unsigned int irq, unsigned int state)
{
- unsigned bank, bit;
+ unsigned bank, bit, wakeup = 0;
unsigned long flags;
bank = SIC_SYSIRQ(irq) / 32;
bit = SIC_SYSIRQ(irq) % 32;
+ switch (irq) {
+#ifdef IRQ_RTC
+ case IRQ_RTC:
+ wakeup |= WAKE;
+ break;
+#endif
+#ifdef IRQ_CAN0_RX
+ case IRQ_CAN0_RX:
+ wakeup |= CANWE;
+ break;
+#endif
+#ifdef IRQ_CAN1_RX
+ case IRQ_CAN1_RX:
+ wakeup |= CANWE;
+ break;
+#endif
+#ifdef IRQ_USB_INT0
+ case IRQ_USB_INT0:
+ wakeup |= USBWE;
+ break;
+#endif
+#ifdef IRQ_KEY
+ case IRQ_KEY:
+ wakeup |= KPADWE;
+ break;
+#endif
+#ifdef IRQ_CNT
+ case IRQ_CNT:
+ wakeup |= ROTWE;
+ break;
+#endif
+ default:
+ break;
+ }
+
local_irq_save(flags);
- if (state)
+ if (state) {
bfin_sic_iwr[bank] |= (1 << bit);
- else
+ vr_wakeup |= wakeup;
+
+ } else {
bfin_sic_iwr[bank] &= ~(1 << bit);
+ vr_wakeup &= ~wakeup;
+ }
local_irq_restore(flags);
local_irq_disable();
+#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+ /* Clear EMAC Interrupt Status bits so we can demux it later */
+ bfin_write_EMAC_SYSTAT(-1);
+#endif
+
#ifdef CONFIG_BF54x
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR(IWR_DISABLE_ALL);
#endif
return 0;
*/
#include <linux/linkage.h>
-#include <asm/cplb.h>
#include <asm/blackfin.h>
.text
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-
/* When you come here, it is assumed that
* R0 - Which way to be locked
*/
RTS;
ENDPROC(_cache_lock)
-#endif /* BFIN_ICACHE_LOCK */
-
-/* Return the ILOC bits of IMEM_CONTROL
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
*/
+ENTRY(_invalidate_entire_icache)
+ [--SP] = ( R7:5);
-ENTRY(_read_iloc)
- P1.H = HI(IMEM_CONTROL);
- P1.L = LO(IMEM_CONTROL);
- R1 = 0xF;
- R0 = [P1];
- R0 = R0 >> 3;
- R0 = R0 & R1;
+ P0.L = LO(IMEM_CONTROL);
+ P0.H = HI(IMEM_CONTROL);
+ R7 = [P0];
+
+ /* Clear the IMC bit , All valid bits in the instruction
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,IMC_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before invalidating cache. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the instruction cache agian */
+ R6 = (IMC | ENICPLB);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+ ( R7:5) = [SP++];
RTS;
-ENDPROC(_read_iloc)
+ENDPROC(_invalidate_entire_icache)
bfin_pm_standby_restore();
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR(IWR_DISABLE_ALL);
#endif
local_irq_restore(flags);
wakeup = bfin_read_VR_CTL() & ~FREQ;
wakeup |= SCKELOW;
- /* FIXME: merge this somehow with set_irq_wake */
-#ifdef CONFIG_PM_BFIN_WAKE_RTC
- wakeup |= WAKE;
-#endif
#ifdef CONFIG_PM_BFIN_WAKE_PH6
wakeup |= PHYWE;
#endif
-#ifdef CONFIG_PM_BFIN_WAKE_CAN
- wakeup |= CANWE;
-#endif
#ifdef CONFIG_PM_BFIN_WAKE_GP
wakeup |= GPWE;
#endif
-#ifdef CONFIG_PM_BFIN_WAKE_USB
- wakeup |= USBWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
- wakeup |= KPADWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
- wakeup |= ROTWE;
-#endif
local_irq_save(flags);
icache_disable();
bf53x_suspend_l1_mem(memptr);
- do_hibernate(wakeup); /* Goodbye */
+ do_hibernate(wakeup | vr_wakeup); /* Goodbye */
bf53x_resume_l1_mem(memptr);
static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
static struct sram_piece free_l2_sram_head, used_l2_sram_head;
#endif
static void __init l2_sram_init(void)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
free_l2_sram_head.next =
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
if (!free_l2_sram_head.next) {
&& addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
return l1_data_B_sram_free(addr);
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
else if (addr >= (void *)L2_START
&& addr < (void *)(L2_START + L2_LENGTH))
return l2_sram_free(addr);
void *l2_sram_alloc(size_t size)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
unsigned flags;
void *addr;
int l2_sram_free(const void *addr)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
unsigned flags;
int ret;
&free_l1_inst_sram_head, &used_l1_inst_sram_head))
goto not_done;
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
if (_sram_proc_read(buf, &len, count, "L2",
&free_l2_sram_head, &used_l2_sram_head))
goto not_done;
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
data8 sys_uselib
data8 sys_swapon
data8 sys_reboot
- data8 sys32_readdir
+ data8 compat_sys_old_readdir
data8 sys32_mmap /* 90 */
data8 sys32_munmap
data8 sys_truncate
} _sifields;
} compat_siginfo_t;
-struct old_linux32_dirent {
- u32 d_ino;
- u32 d_offset;
- u16 d_namlen;
- char d_name[1];
-};
-
/*
* IA-32 ELF specific definitions for IA-64.
*/
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}
-struct getdents32_callback {
- struct compat_dirent __user *current_dir;
- struct compat_dirent __user *previous;
- int count;
- int error;
-};
-
-struct readdir32_callback {
- struct old_linux32_dirent __user * dirent;
- int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
- unsigned int d_type)
-{
- struct compat_dirent __user * dirent;
- struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
- int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
- u32 d_ino;
-
- buf->error = -EINVAL; /* only used if we fail.. */
- if (reclen > buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->error = -EFAULT; /* only used if we fail.. */
- dirent = buf->previous;
- if (dirent)
- if (put_user(offset, &dirent->d_off))
- return -EFAULT;
- dirent = buf->current_dir;
- buf->previous = dirent;
- if (put_user(d_ino, &dirent->d_ino)
- || put_user(reclen, &dirent->d_reclen)
- || copy_to_user(dirent->d_name, name, namlen)
- || put_user(0, dirent->d_name + namlen))
- return -EFAULT;
- dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
- buf->current_dir = dirent;
- buf->count -= reclen;
- return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
- struct file * file;
- struct compat_dirent __user * lastdirent;
- struct getdents32_callback buf;
- int error;
-
- error = -EFAULT;
- if (!access_ok(VERIFY_WRITE, dirent, count))
- goto out;
-
- error = -EBADF;
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.current_dir = dirent;
- buf.previous = NULL;
- buf.count = count;
- buf.error = 0;
-
- error = vfs_readdir(file, filldir32, &buf);
- if (error < 0)
- goto out_putf;
- error = buf.error;
- lastdirent = buf.previous;
- if (lastdirent) {
- if (put_user(file->f_pos, &lastdirent->d_off))
- error = -EFAULT;
- else
- error = count - buf.count;
- }
-
-out_putf:
- fput(file);
-out:
- return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
- unsigned int d_type)
-{
- struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
- struct old_linux32_dirent __user * dirent;
- u32 d_ino;
-
- if (buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->count++;
- dirent = buf->dirent;
- if (put_user(d_ino, &dirent->d_ino)
- || put_user(offset, &dirent->d_offset)
- || put_user(namlen, &dirent->d_namlen)
- || copy_to_user(dirent->d_name, name, namlen)
- || put_user(0, dirent->d_name + namlen))
- return -EFAULT;
- return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
- int error;
- struct file * file;
- struct readdir32_callback buf;
-
- error = -EBADF;
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.count = 0;
- buf.dirent = dirent;
-
- error = vfs_readdir(file, fillonedir32, &buf);
- if (error >= 0)
- error = buf.count;
- fput(file);
-out:
- return error;
-}
-
struct sel_arg_struct {
unsigned int n;
unsigned int inp;
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
+#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096)
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_IA_64
unsigned int count;
} __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
#define IPI_CALL_FUNC 0
#define IPI_CPU_STOP 1
void
smp_flush_tlb_cpumask(cpumask_t xcpumask)
{
- unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+ unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
cpumask_t cpumask = xcpumask;
int mycpu, cpu, flush_mycpu = 0;
mycpu = smp_processor_id();
for_each_cpu_mask(cpu, cpumask)
- counts[cpu] = local_tlb_flush_counts[cpu].count;
+ counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
mb();
for_each_cpu_mask(cpu, cpumask) {
smp_local_flush_tlb();
for_each_cpu_mask(cpu, cpumask)
- while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+ while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
udelay(FLUSH_DELAY);
preempt_enable();
struct pci_bus * __devinit
pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
{
- struct pci_root_info info;
struct pci_controller *controller;
unsigned int windows = 0;
struct pci_bus *pbus;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
&windows);
if (windows) {
+ struct pci_root_info info;
+
controller->window =
kmalloc_node(sizeof(*controller->window) * windows,
GFP_KERNEL, controller->node);
if (!controller->window)
goto out2;
- }
- name = kmalloc(16, GFP_KERNEL);
- if (!name)
- goto out3;
+ name = kmalloc(16, GFP_KERNEL);
+ if (!name)
+ goto out3;
- sprintf(name, "PCI Bus %04x:%02x", domain, bus);
- info.controller = controller;
- info.name = name;
- acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
- &info);
+ sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+ info.controller = controller;
+ info.name = name;
+ acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ add_window, &info);
+ }
/*
* See arch/x86/pci/acpi.c.
* The desired pci bus might already be scanned in a quirk. We
};
int h_get_mpp(struct hvcall_mpp_data *);
+
+#ifdef CONFIG_PPC_PSERIES
+extern int CMO_PrPSP;
+extern int CMO_SecPSP;
+extern unsigned long CMO_PageSize;
+
+static inline int cmo_get_primary_psp(void)
+{
+ return CMO_PrPSP;
+}
+
+static inline int cmo_get_secondary_psp(void)
+{
+ return CMO_SecPSP;
+}
+
+static inline unsigned long cmo_get_page_size(void)
+{
+ return CMO_PageSize;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
#ifndef _ASM_POWERPC_IDE_H
#define _ASM_POWERPC_IDE_H
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
+#include <linux/compiler.h>
#include <asm/io.h>
#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c))
#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c))
#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c))
-#ifndef __powerpc64__
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
- switch (base) {
- case 0x1f0: return 14;
- case 0x170: return 15;
- }
-#endif
- return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- }
-#endif
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR 1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
#endif /* _ASM_POWERPC_IDE_H */
#define TRACE_ENABLE_INTS bl .trace_hardirqs_on
#define TRACE_DISABLE_INTS bl .trace_hardirqs_off
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
- cmpdi en, 0; \
+ cmpdi en,0; \
bne 95f; \
stb en,PACASOFTIRQEN(r13); \
bl .trace_hardirqs_off; \
li en,1;
#define TRACE_AND_RESTORE_IRQ(en) \
TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
-96: stb en,PACASOFTIRQEN(r13)
+ stb en,PACASOFTIRQEN(r13); \
+96:
#else
#define TRACE_ENABLE_INTS
#define TRACE_DISABLE_INTS
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#ifdef __powerpc64__
static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
mm->context.id = NO_CONTEXT;
- mm->context.vdso_base = 0;
return 0;
}
SYSCALL(uselib)
SYSCALL(swapon)
SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
SYSCALL_SPU(mmap)
SYSCALL_SPU(munmap)
SYSCALL_SPU(truncate)
}
__setup("savemaxmem=", parse_savemaxmem);
+
+static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
+ unsigned long offset, int userbuf)
+{
+ if (userbuf) {
+ if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
+ return -EFAULT;
+ } else
+ memcpy(buf, (vaddr + offset), csize);
+
+ return csize;
+}
+
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
if (!csize)
return 0;
- vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+ csize = min(csize, PAGE_SIZE);
- if (userbuf) {
- if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
- iounmap(vaddr);
- return -EFAULT;
- }
- } else
- memcpy(buf, (vaddr + offset), csize);
+ if (pfn < max_pfn) {
+ vaddr = __va(pfn << PAGE_SHIFT);
+ csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+ } else {
+ vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+ csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+ iounmap(vaddr);
+ }
- iounmap(vaddr);
return csize;
}
lis r10, 0x40
1: addic. r10, r10, -0x1000
tlbie r10
- blt 1b
+ bgt 1b
sync
blr
}
EXPORT_SYMBOL(ibmebus_free_irq);
-static ssize_t name_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%s\n", to_of_device(dev)->node->name);
-}
-
-static struct device_attribute ibmebus_dev_attrs[] = {
- __ATTR_RO(name),
- __ATTR_NULL
-};
-
static char *ibmebus_chomp(const char *in, size_t count)
{
char *out = kmalloc(count + 1, GFP_KERNEL);
struct bus_type ibmebus_bus_type = {
.uevent = of_device_uevent,
- .dev_attrs = ibmebus_dev_attrs,
.bus_attrs = ibmebus_bus_attrs
};
EXPORT_SYMBOL(ibmebus_bus_type);
unsigned long cmo_faults = 0;
unsigned long cmo_fault_time = 0;
+ seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO));
+
if (!firmware_has_feature(FW_FEATURE_CMO))
return;
seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
seq_printf(m, "cmo_fault_time_usec=%lu\n",
cmo_fault_time / tb_ticks_per_usec);
+ seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp());
+ seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp());
+ seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
}
static int pseries_lparcfg_data(struct seq_file *m, void *v)
relocate_new_kernel_size);
flush_icache_range(reboot_code_buffer,
- reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
/* now call it */
/* set a new stack at the bottom of our page... */
/* (not really needed now) */
- addi r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+ addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
stw r0, 0(r1)
/* Do the copies */
{
module_bug_cleanup(mod);
}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
- struct mod_arch_specific *mod;
- unsigned int i;
- struct bug_entry *bug;
-
- list_for_each_entry(mod, &module_bug_list, bug_list) {
- bug = mod->bug_table;
- for (i = 0; i < mod->num_bugs; ++i, ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- }
- return NULL;
-}
#include <asm/ppc-pci.h>
#include <asm/syscalls.h>
-struct old_linux_dirent32 {
- u32 d_ino;
- u32 d_offset;
- unsigned short d_namlen;
- char d_name[1];
-};
-
-struct readdir_callback32 {
- struct old_linux_dirent32 __user * dirent;
- int count;
-};
-
-static int fillonedir(void * __buf, const char * name, int namlen,
- off_t offset, u64 ino, unsigned int d_type)
-{
- struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf;
- struct old_linux_dirent32 __user * dirent;
- ino_t d_ino;
-
- if (buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->count++;
- dirent = buf->dirent;
- put_user(d_ino, &dirent->d_ino);
- put_user(offset, &dirent->d_offset);
- put_user(namlen, &dirent->d_namlen);
- copy_to_user(dirent->d_name, name, namlen);
- put_user(0, dirent->d_name + namlen);
- return 0;
-}
-
-asmlinkage int old32_readdir(unsigned int fd, struct old_linux_dirent32 __user *dirent, unsigned int count)
-{
- int error = -EBADF;
- struct file * file;
- struct readdir_callback32 buf;
-
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.count = 0;
- buf.dirent = dirent;
-
- error = vfs_readdir(file, (filldir_t)fillonedir, &buf);
- if (error < 0)
- goto out_putf;
- error = buf.count;
-
-out_putf:
- fput(file);
-out:
- return error;
-}
asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
return error;
}
error = viodrv->probe(viodev, id);
- if (error)
+ if (error && firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_bus_remove(viodev);
}
(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
if (runcntl == 0)
runcntl = SPU_RUNCNTL_RUNNABLE;
- }
-
- if (ctx->flags & SPU_CREATE_NOSCHED) {
- spuctx_switch_state(ctx, SPU_UTIL_USER);
- ctx->ops->runcntl_write(ctx, runcntl);
} else {
unsigned long privcntl;
else
privcntl = SPU_PRIVCNTL_MODE_NORMAL;
- ctx->ops->npc_write(ctx, *npc);
ctx->ops->privcntl_write(ctx, privcntl);
- ctx->ops->runcntl_write(ctx, runcntl);
+ ctx->ops->npc_write(ctx, *npc);
+ }
+
+ ctx->ops->runcntl_write(ctx, runcntl);
+
+ if (ctx->flags & SPU_CREATE_NOSCHED) {
+ spuctx_switch_state(ctx, SPU_UTIL_USER);
+ } else {
if (ctx->state == SPU_STATE_SAVED) {
ret = spu_activate(ctx, 0);
if (tmp && tmp->prio > ctx->prio &&
!(tmp->flags & SPU_CREATE_NOSCHED) &&
- (!victim || tmp->prio > victim->prio))
+ (!victim || tmp->prio > victim->prio)) {
victim = spu->ctx;
+ get_spu_context(victim);
+ }
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
* look at another context or give up after X retries.
*/
if (!mutex_trylock(&victim->state_mutex)) {
+ put_spu_context(victim);
victim = NULL;
goto restart;
}
* restart the search.
*/
mutex_unlock(&victim->state_mutex);
+ put_spu_context(victim);
victim = NULL;
goto restart;
}
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
+ put_spu_context(victim);
return spu;
}
struct spu_context *ctx = spu->ctx;
if (ctx) {
+ get_spu_context(ctx);
mutex_unlock(mtx);
spusched_tick(ctx);
mutex_lock(mtx);
+ put_spu_context(ctx);
}
}
mutex_unlock(mtx);
node = spu->node;
if (old_state == SPU_UTIL_USER)
atomic_dec(&cbe_spu_info[node].busy_spus);
- if (new_state == SPU_UTIL_USER);
+ if (new_state == SPU_UTIL_USER)
atomic_inc(&cbe_spu_info[node].busy_spus);
}
}
#define _PSERIES_PLPAR_WRAPPERS_H
#include <asm/hvcall.h>
+#include <asm/page.h>
static inline long poll_pending(void)
{
static inline long plpar_page_set_loaned(unsigned long vpa)
{
- return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+ unsigned long cmo_page_sz = cmo_get_page_size();
+ long rc = 0;
+ int i;
+
+ for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+ rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
+
+ for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+ plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
+ vpa + i - cmo_page_sz, 0);
+
+ return rc;
}
static inline long plpar_page_set_active(unsigned long vpa)
{
- return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+ unsigned long cmo_page_sz = cmo_get_page_size();
+ long rc = 0;
+ int i;
+
+ for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+ rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
+
+ for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+ plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
+ vpa + i - cmo_page_sz, 0);
+
+ return rc;
}
extern void vpa_init(int cpu);
#include "plpar_wrappers.h"
#include "pseries.h"
+int CMO_PrPSP = -1;
+int CMO_SecPSP = -1;
+unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
{
char *ptr, *key, *value, *end;
int call_status;
- int PrPSP = -1;
- int SecPSP = -1;
+ int page_order = IOMMU_PAGE_SHIFT;
pr_debug(" -> fw_cmo_feature_init()\n");
spin_lock(&rtas_data_buf_lock);
break;
}
- if (0 == strcmp(key, "PrPSP"))
- PrPSP = simple_strtol(value, NULL, 10);
+ if (0 == strcmp(key, "CMOPageSize"))
+ page_order = simple_strtol(value, NULL, 10);
+ else if (0 == strcmp(key, "PrPSP"))
+ CMO_PrPSP = simple_strtol(value, NULL, 10);
else if (0 == strcmp(key, "SecPSP"))
- SecPSP = simple_strtol(value, NULL, 10);
+ CMO_SecPSP = simple_strtol(value, NULL, 10);
value = key = ptr + 1;
}
ptr++;
}
- if (PrPSP != -1 || SecPSP != -1) {
+ /* Page size is returned as the power of 2 of the page size,
+ * convert to the page size in bytes before returning
+ */
+ CMO_PageSize = 1 << page_order;
+ pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
+
+ if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
pr_info("CMO enabled\n");
- pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+ pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+ CMO_SecPSP);
powerpc_firmware_features |= FW_FEATURE_CMO;
} else
- pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+ pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+ CMO_SecPSP);
spin_unlock(&rtas_data_buf_lock);
pr_debug(" <- fw_cmo_feature_init()\n");
}
#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
/* Allocate one page for the pdp and the second for the code */
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_S390
.vsync_len = 1,
.sync = 0, /* hsync and vsync are active low */
},
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
.board_cfg = {
.display_on = ap320_wvga_power_on,
},
.vsync_len = 2,
.sync = 0,
},
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
}
#endif
#ifdef CONFIG_SH_MIGOR_QVGA
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT,
},
+ .lcd_size_cfg = { /* 2.4 inch */
+ .width = 49,
+ .height = 37,
+ },
.board_cfg = {
.setup_sys = migor_lcd_qvga_setup,
},
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/mtd/physmap.h>
-#include <asm/io.h>
+#include <linux/fb.h>
+#include <linux/io.h>
#include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
/* NOR Flash */
static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
},
};
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xFEE00800, /* use eth1 */
+ .end = 0xFEE00F7C - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 58, /* irq number */
+ .end = 58,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+ .phy = 1,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+ .name = "sh-eth",
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .dev = {
+ .platform_data = &sh7763_eth_pdata,
+ },
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+ {
+ .start = 0xFFE80000,
+ .end = 0xFFE80442 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+ .refresh = 60,
+ .name = "VGA Monitor",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 10000,
+ .left_margin = 80,
+ .right_margin = 24,
+ .upper_margin = 30,
+ .lower_margin = 1,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+ .def_mode = &sh7763fb_videomode,
+ .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+ .lddfr = LDDFR_16BPP_RGB565,
+ .ldpmmr = 0x0000,
+ .ldpspr = 0xFFFF,
+ .ldaclnr = 0x0001,
+ .ldickr = 0x1102,
+ .rotate = 0,
+ .novsync = 0,
+ .blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+ .name = "sh7760-lcdc",
+ .resource = sh7763rdp_fb_resources,
+ .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+ .dev = {
+ .platform_data = &sh7763fb_def_pdata,
+ },
+};
+
static struct platform_device *sh7763rdp_devices[] __initdata = {
&sh7763rdp_nor_flash_device,
+ &sh7763rdp_eth_device,
+ &sh7763rdp_fb_device,
};
static int __init sh7763rdp_devices_setup(void)
return platform_add_devices(sh7763rdp_devices,
ARRAY_SIZE(sh7763rdp_devices));
}
-__initcall(sh7763rdp_devices_setup);
+device_initcall(sh7763rdp_devices_setup);
static void __init sh7763rdp_setup(char **cmdline_p)
{
*
* Renesas SH-X3 Prototype Board Support.
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/smc91x.h>
#include <asm/ilsel.h>
static struct resource heartbeat_resources[] = {
.resource = heartbeat_resources,
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x18000300,
.id = -1,
.resource = smc91x_resources,
.num_resources = ARRAY_SIZE(smc91x_resources),
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
static struct resource r8a66597_usb_host_resources[] = {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri Jun 6 12:20:17 2008
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug 8 13:44:20 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) ({ (void)p; 0; })
+#define FLAT_PLAT_INIT(_r) \
+ do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+ _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+ _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+ _r->sr = SR_FD; } while (0)
+
#endif /* __ASM_SH_FLAT_H */
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_SH
#define PORT_MSELCRB 0xa4050182
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
#define PORT_PSELA 0xa405014e
#define PORT_PSELB 0xa4050150
#define PORT_PSELC 0xa4050152
void (*display_off)(void *board_data);
};
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+ unsigned long width;
+ unsigned long height;
+};
+
struct sh_mobile_lcdc_chan_cfg {
int chan;
int bpp;
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
struct fb_videomode lcd_cfg;
+ struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
};
void flush_dcache_page(struct page *pg);
void flush_icache_range(unsigned long start, unsigned long end);
void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+
+#define p3_cache_init() do { } while (0)
+
#else
#include <cpu-common/cpu/cacheflush.h>
#endif
};
static struct uio_info veu0_platform_data = {
- .name = "VEU",
+ .name = "VEU2H",
.version = "0",
.irq = 54,
};
};
static struct uio_info veu1_platform_data = {
- .name = "VEU",
+ .name = "VEU2H",
.version = "0",
.irq = 27,
};
* GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
* compiler which include backported patches.
*/
-DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udivsi3_i4i);
#endif
+#endif
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
choice
prompt "HugeTLB page size"
depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+ default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
default HUGETLB_PAGE_SIZE_64K
config HUGETLB_PAGE_SIZE_64K
bool "64kB"
+ depends on !PAGE_SIZE_64KB
config HUGETLB_PAGE_SIZE_256K
bool "256kB"
}
EXPORT_SYMBOL(dma_cache_sync);
+static int __init memchunk_setup(char *str)
+{
+ return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+ char *p = boot_command_line;
+ int k = strlen(name);
+
+ while ((p = strstr(p, "memchunk."))) {
+ p += 9; /* strlen("memchunk.") */
+ if (!strncmp(name, p, k) && p[k] == '=') {
+ p += k + 1;
+ *sizep = memparse(p, NULL);
+ pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+ name, *sizep);
+ break;
+ }
+ }
+}
+
int platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize)
{
return -EINVAL;
}
+ memchunk_cmdline_override(name, &memsize);
+ if (!memsize)
+ return 0;
+
buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
if (!buf) {
pr_warning("%s: unable to allocate memory\n", name);
start += PAGE_SIZE;
}
+ if (start > end)
+ start = end;
+
return start;
}
#else
find_ramdisk(phys_base);
- if (cmdline_memory_size)
- lmb_enforce_memory_limit(phys_base + cmdline_memory_size);
+ lmb_enforce_memory_limit(cmdline_memory_size);
lmb_analyze();
lmb_dump_all();
void free_initmem(void)
{
unsigned long addr, initend;
+ int do_free = 1;
+
+ /* If the physical memory maps were trimmed by kernel command
+ * line options, don't even try freeing this initmem stuff up.
+ * The kernel image could have been in the trimmed out region
+ * and if so the freeing below will free invalid page structs.
+ */
+ if (cmdline_memory_size)
+ do_free = 0;
/*
* The init section is aligned to 8k in vmlinux.lds. Page align for >8k pagesizes.
((unsigned long) __va(kern_base)) -
((unsigned long) KERNBASE));
memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
- p = virt_to_page(page);
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- num_physpages++;
- totalram_pages++;
+ if (do_free) {
+ p = virt_to_page(page);
+
+ ClearPageReserved(p);
+ init_page_count(p);
+ __free_page(p);
+ num_physpages++;
+ totalram_pages++;
+ }
}
}
local memory controller of the CPU and add some more
NUMA awareness to the kernel.
- For i386 this is currently highly experimental and should be only
+ For 32-bit this is currently highly experimental and should be only
used for kernel development. It might also cause boot failures.
- For x86_64 this is recommended on all multiprocessor Opteron systems.
+ For 64-bit this is recommended on all multiprocessor Opteron systems.
If the system is EM64T, you should say N unless your system is
EM64T NUMA.
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
+ bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
help
Generate crash dump after being started by kexec.
#include <linux/edd.h>
#include <asm/boot.h>
#include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
/* Useful macros */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
extern struct setup_header hdr;
extern struct boot_params boot_params;
int cmdline_find_option_bool(const char *option);
/* cpu.c, cpucheck.c */
+struct cpu_features {
+ int level; /* Family, or 64 for x86-64 */
+ int model;
+ u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
int validate_cpu(void);
*/
#include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
#include "cpustr.h"
static char *cpu_name(int level)
#ifdef _SETUP
# include "boot.h"
-# include "bitops.h"
#endif
#include <linux/types.h>
-#include <asm/cpufeature.h>
#include <asm/processor-flags.h>
#include <asm/required-features.h>
#include <asm/msr-index.h>
-struct cpu_features {
- int level; /* Family, or 64 for x86-64 */
- int model;
- u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
static u32 cpu_vendor[3];
static u32 err_flags[NCAPINTS];
*/
static void query_ist(void)
{
+ /* Some older BIOSes apparently crash on this call, so filter
+ it from machines too old to have SpeedStep at all. */
+ if (cpu.level < 6)
+ return;
+
asm("int $0x15"
: "=a" (boot_params.ist_info.signature),
"=b" (boot_params.ist_info.command),
*/
#include "boot.h"
-#include <linux/kernel.h>
#define SMAP 0x534d4150 /* ASCII "SMAP" */
#warning ACPI uses CMPXCHG, i486 and later hardware
#endif
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
/* --------------------------------------------------------------------------
Boot-time Configuration
-------------------------------------------------------------------------- */
struct acpi_mcfg_allocation *pci_mmcfg_config;
int pci_mmcfg_config_num;
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+ if (!strcmp(mcfg->header.oem_id, "SGI"))
+ acpi_mcfg_64bit_base_addr = TRUE;
+
+ return 0;
+}
+
int __init acpi_parse_mcfg(struct acpi_table_header *header)
{
struct acpi_table_mcfg *mcfg;
}
memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+ acpi_mcfg_oem_check(mcfg);
+
for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+ if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+ !acpi_mcfg_64bit_base_addr) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
kfree(pci_mmcfg_config);
/* address in low memory of the wakeup routine. */
static unsigned long acpi_realmode;
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
static char temp_stack[10240];
#endif
#endif /* !CONFIG_64BIT */
header->pmode_cr0 = read_cr0();
- header->pmode_cr4 = read_cr4();
+ header->pmode_cr4 = read_cr4_safe();
header->realmode_flags = acpi_realmode_flags;
header->real_magic = 0x12345678;
*/
static int iommu_completion_wait(struct amd_iommu *iommu)
{
- int ret;
+ int ret, ready = 0;
+ unsigned status = 0;
struct iommu_cmd cmd;
- volatile u64 ready = 0;
- unsigned long ready_phys = virt_to_phys(&ready);
unsigned long i = 0;
memset(&cmd, 0, sizeof(cmd));
- cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
- cmd.data[1] = upper_32_bits(ready_phys);
- cmd.data[2] = 1; /* value written to 'ready' */
+ cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
iommu->need_sync = 0;
while (!ready && (i < EXIT_LOOP_COUNT)) {
++i;
- cpu_relax();
+ /* wait for the bit to become one */
+ status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+ ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
}
+ /* set bit back to zero */
+ status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
+ writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
address &= PAGE_MASK;
CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
cmd.data[1] |= domid;
- cmd.data[2] = LOW_U32(address);
+ cmd.data[2] = lower_32_bits(address);
cmd.data[3] = upper_32_bits(address);
if (s) /* size bit - we flush more than one 4kb page */
cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
return 0;
}
+/*
+ * Init the device table to not allow DMA access for devices and
+ * suppress all page faults
+ */
+static void init_device_table(void)
+{
+ u16 devid;
+
+ for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
+ set_dev_entry_bit(devid, DEV_ENTRY_VALID);
+ set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+ set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
+ }
+}
+
/*
* This function finally enables all IOMMUs found in the system after
* they have been initialized
if (amd_iommu_pd_alloc_bitmap == NULL)
goto free;
+ /* init the device table */
+ init_device_table();
+
/*
* let all alias entries point to itself
*/
if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
goto free;
- ret = amd_iommu_init_dma_ops();
+ ret = sysdev_class_register(&amd_iommu_sysdev_class);
if (ret)
goto free;
- ret = sysdev_class_register(&amd_iommu_sysdev_class);
+ ret = sysdev_register(&device_amd_iommu);
if (ret)
goto free;
- ret = sysdev_register(&device_amd_iommu);
+ ret = amd_iommu_init_dma_ops();
if (ret)
goto free;
}
}
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
num_processors++;
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
unsigned long mp_lapic_addr;
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
/*
* Get the LAPIC version
*/
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
num_processors++;
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
{
- if (!data->acpi_data->state_count || (cpu_family == CPU_HW_PSTATE))
+ if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
return;
- data->irt = (data->acpi_data->states[index].control >> IRT_SHIFT) & IRT_MASK;
- data->rvo = (data->acpi_data->states[index].control >> RVO_SHIFT) & RVO_MASK;
- data->exttype = (data->acpi_data->states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
- data->plllock = (data->acpi_data->states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
- data->vidmvs = 1 << ((data->acpi_data->states[index].control >> MVS_SHIFT) & MVS_MASK);
- data->vstable = (data->acpi_data->states[index].control >> VST_SHIFT) & VST_MASK;
-}
-
-
-static struct acpi_processor_performance *acpi_perf_data;
-static int preregister_valid;
-
-static int powernow_k8_cpu_preinit_acpi(void)
-{
- acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
- if (!acpi_perf_data)
- return -ENODEV;
-
- if (acpi_processor_preregister_performance(acpi_perf_data))
- return -ENODEV;
- else
- preregister_valid = 1;
- return 0;
+ data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+ data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+ data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+ data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+ data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+ data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
}
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
struct cpufreq_frequency_table *powernow_table;
int ret_val;
- int cpu = 0;
- data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
- if (acpi_processor_register_performance(data->acpi_data, data->cpu)) {
+ if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
/* verify the data contained in the ACPI structures */
- if (data->acpi_data->state_count <= 1) {
+ if (data->acpi_data.state_count <= 1) {
dprintk("No ACPI P-States\n");
goto err_out;
}
- if ((data->acpi_data->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (data->acpi_data->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data->control_register.space_id,
- data->acpi_data->status_register.space_id);
+ data->acpi_data.control_register.space_id,
+ data->acpi_data.status_register.space_id);
goto err_out;
}
/* fill in data->powernow_table */
powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
- * (data->acpi_data->state_count + 1)), GFP_KERNEL);
+ * (data->acpi_data.state_count + 1)), GFP_KERNEL);
if (!powernow_table) {
dprintk("powernow_table memory alloc failure\n");
goto err_out;
if (ret_val)
goto err_out_mem;
- powernow_table[data->acpi_data->state_count].frequency = CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data->state_count].index = 0;
+ powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].index = 0;
data->powernow_table = powernow_table;
/* fill in data */
- data->numps = data->acpi_data->state_count;
+ data->numps = data->acpi_data.state_count;
if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
print_basics(data);
powernow_k8_acpi_pst_values(data, 0);
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- /* determine affinity, from ACPI if available */
- if (preregister_valid) {
- if ((data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ALL) ||
- (data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ANY))
- data->starting_core_affinity = data->acpi_data->shared_cpu_map;
- else
- data->starting_core_affinity = cpumask_of_cpu(data->cpu);
- } else {
- /* best guess from family if not */
- if (cpu_family == CPU_HW_PSTATE)
- data->starting_core_affinity = cpumask_of_cpu(data->cpu);
- else
- data->starting_core_affinity = per_cpu(cpu_core_map, data->cpu);
- }
-
return 0;
err_out_mem:
kfree(powernow_table);
err_out:
- acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
- data->acpi_data->state_count = 0;
+ data->acpi_data.state_count = 0;
return -ENODEV;
}
rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
- for (i = 0; i < data->acpi_data->state_count; i++) {
+ for (i = 0; i < data->acpi_data.state_count; i++) {
u32 index;
- index = data->acpi_data->states[i].control & HW_PSTATE_MASK;
+ index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
if (index > data->max_hw_pstate) {
printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
powernow_table[i].index = index;
- powernow_table[i].frequency = data->acpi_data->states[i].core_frequency * 1000;
+ powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
}
return 0;
}
{
int i;
int cntlofreq = 0;
- for (i = 0; i < data->acpi_data->state_count; i++) {
+ for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid;
u32 vid;
if (data->exttype) {
- fid = data->acpi_data->states[i].status & EXT_FID_MASK;
- vid = (data->acpi_data->states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+ fid = data->acpi_data.states[i].status & EXT_FID_MASK;
+ vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
} else {
- fid = data->acpi_data->states[i].control & FID_MASK;
- vid = (data->acpi_data->states[i].control >> VID_SHIFT) & VID_MASK;
+ fid = data->acpi_data.states[i].control & FID_MASK;
+ vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
}
dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
cntlofreq = i;
}
- if (powernow_table[i].frequency != (data->acpi_data->states[i].core_frequency * 1000)) {
+ if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
powernow_table[i].frequency,
- (unsigned int) (data->acpi_data->states[i].core_frequency * 1000));
+ (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
continue;
}
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
{
- if (data->acpi_data->state_count)
- acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+ if (data->acpi_data.state_count)
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
}
#else
-static int powernow_k8_cpu_preinit_acpi(void) { return -ENODEV; }
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
- cpumask_t oldmask = CPU_MASK_ALL;
+ cpumask_t oldmask;
int rc;
if (!cpu_online(pol->cpu))
/* run on any CPU again */
set_cpus_allowed_ptr(current, &oldmask);
- pol->cpus = data->starting_core_affinity;
+ if (cpu_family == CPU_HW_PSTATE)
+ pol->cpus = cpumask_of_cpu(pol->cpu);
+ else
+ pol->cpus = per_cpu(cpu_core_map, pol->cpu);
data->available_cores = &(pol->cpus);
/* Take a crude guess here.
}
if (supported_cpus == num_online_cpus()) {
- powernow_k8_cpu_preinit_acpi();
printk(KERN_INFO PFX "Found %d %s "
"processors (%d cpu cores) (" VERSION ")\n",
num_online_nodes(),
dprintk("exit\n");
cpufreq_unregister_driver(&cpufreq_amd64_driver);
-
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
- free_percpu(acpi_perf_data);
-#endif
}
MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
/* the acpi table needs to be kept. it's only available if ACPI was
* used to determine valid frequency/vid/fid states */
- struct acpi_processor_performance *acpi_data;
+ struct acpi_processor_performance acpi_data;
#endif
/* we need to keep track of associated cores, but let cpufreq
* handle hotplug events - so just point at cpufreq pol->cpus
* structure */
cpumask_t *available_cores;
- cpumask_t starting_core_affinity;
};
perfctr_msr = MSR_P4_IQ_PERFCTR1;
evntsel_msr = MSR_P4_CRU_ESCR0;
cccr_msr = MSR_P4_IQ_CCCR1;
- cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+
+ /* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
+ if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
+ cccr_val = P4_CCCR_OVF_PMI0;
+ else
+ cccr_val = P4_CCCR_OVF_PMI1;
+ cccr_val |= P4_CCCR_ESCR_SELECT(4);
}
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
* directory. If I have PAE, I just need to duplicate one entry in
* page directory.
*/
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
efi_bak_pg_dir_pointer[0].pgd =
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
swapper_pg_dir[pgd_index(0)].pgd =
enum map_type {map_wb, map_uc};
-static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
{
unsigned long bytes, paddr;
BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
(__START_KERNEL & PGDIR_MASK)));
+ BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
int __init hpet_enable(void)
{
unsigned long id;
+ int i;
if (!is_hpet_capable())
return 0;
* Read the period and check for a sane value:
*/
hpet_period = hpet_readl(HPET_PERIOD);
+
+ /*
+ * AMD SB700 based systems with spread spectrum enabled use a
+ * SMM based HPET emulation to provide proper frequency
+ * setting. The SMM code is initialized with the first HPET
+ * register access and takes some time to complete. During
+ * this time the config register reads 0xffffffff. We check
+ * for max. 1000 loops whether the config register reads a non
+ * 0xffffffff value to make sure that HPET is up and running
+ * before we go further. A counting loop is safe, as the HPET
+ * access takes thousands of CPU cycles. On non SB700 based
+ * machines this check is only done once and has no side
+ * effects.
+ */
+ for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
+ if (i == 1000) {
+ printk(KERN_WARNING
+ "HPET config register value = 0xFFFFFFFF. "
+ "Disabling HPET\n");
+ goto out_nohpet;
+ }
+ }
+
if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
goto out_nohpet;
#include <linux/init.h>
#include <linux/numa.h>
#include <linux/ftrace.h>
+#include <linux/suspend.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
/*
* A architecture hook called to validate the
* proposed image and prepare the control pages
- * as needed. The pages for KEXEC_CONTROL_CODE_SIZE
+ * as needed. The pages for KEXEC_CONTROL_PAGE_SIZE
* have been allocated, but the segments have yet
* been copied into the kernel.
*
{
unsigned long page_list[PAGES_NR];
void *control_page;
+ int save_ftrace_enabled;
asmlinkage unsigned long
(*relocate_kernel_ptr)(unsigned long indirection_page,
unsigned long control_page,
unsigned int has_pae,
unsigned int preserve_context);
- tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ save_processor_state();
+#endif
+
+ save_ftrace_enabled = __ftrace_enabled_save();
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
}
control_page = page_address(image->control_code_page);
- memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
+ memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
relocate_kernel_ptr = control_page;
page_list[PA_CONTROL_PAGE] = __pa(control_page);
(unsigned long)page_list,
image->start, cpu_has_pae,
image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ restore_processor_state();
+#endif
+
+ __ftrace_enabled_restore(save_ftrace_enabled);
}
void arch_crash_save_vmcoreinfo(void)
#include <linux/module.h>
#include <asm/geode.h>
+#define MFGPT_DEFAULT_IRQ 7
+
static struct mfgpt_timer_t {
unsigned int avail:1;
} mfgpt_timers[MFGPT_MAX_TIMERS];
}
EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
{
- u32 val, dummy;
- int offset;
+ u32 zsel, lpc, dummy;
+ int shift;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
- if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+ /*
+ * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
+ * is using the same CMP of the timer's Siamese twin, the IRQ is set to
+ * 2, and we mustn't use nor change it.
+ * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
+ * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
+ * with *irq==0 is safe. Currently there _are_ no 2 drivers.
+ */
+ rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
+ shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
+ if (((zsel >> shift) & 0xF) == 2)
return -EIO;
- rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);
+ /* Choose IRQ: if none supplied, keep IRQ already set or use default */
+ if (!*irq)
+ *irq = (zsel >> shift) & 0xF;
+ if (!*irq)
+ *irq = MFGPT_DEFAULT_IRQ;
- offset = (timer % 4) * 4;
-
- val &= ~((0xF << offset) | (0xF << (offset + 16)));
+ /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
+ if (*irq < 1 || *irq == 2 || *irq > 15)
+ return -EIO;
+ rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
+ if (lpc & (1 << *irq))
+ return -EIO;
+ /* All chosen and checked - go for it */
+ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+ return -EIO;
if (enable) {
- val |= (irq & 0x0F) << (offset);
- val |= (irq & 0x0F) << (offset + 16);
+ zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
+ wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
}
- wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
return 0;
}
static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
static u16 mfgpt_event_clock;
-static int irq = 7;
+static int irq;
static int __init mfgpt_setup(char *str)
{
get_option(&str, &irq);
mfgpt_event_clock = timer;
/* Set up the IRQ on the MFGPT side */
- if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
return -EIO;
}
&mfgpt_clockevent);
printk(KERN_INFO
- "mfgpt-timer: registering the MFGPT timer as a clock event.\n");
+ "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
+ timer, irq);
clockevents_register_device(&mfgpt_clockevent);
return 0;
err:
- geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
printk(KERN_ERR
"mfgpt-timer: Unable to set up the MFGPT clock source\n");
return -EIO;
{}
};
-void __init check_enable_amd_mmconf_dmi(void)
+void __cpuinit check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}
return sum & 0xFF;
}
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
{
int apicid;
char *bootup_cpu = "";
}
-static void construct_ioapic_table(int mpc_default_type)
+static void __init construct_ioapic_table(int mpc_default_type)
{
struct mpc_config_ioapic ioapic;
struct mpc_config_bus bus;
construct_default_ioirq_mptable(mpc_default_type);
}
#else
-static inline void construct_ioapic_table(int mpc_default_type) { }
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
#endif
static inline void __init construct_default_ISA_mptable(int mpc_default_type)
ret = -EIO; /* MSR not supported */
out:
unlock_kernel();
- return 0;
+ return ret;
}
/*
}
#endif
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+ printk(KERN_CONT "\n");
+
+ printk(KERN_WARNING
+ "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+ printk(KERN_WARNING
+ "Please report this to bugzilla.kernel.org,\n");
+ printk(KERN_WARNING
+ "and attach the output of the 'dmesg' command.\n");
+
+ per_cpu(wd_enabled, cpu) = 0;
+ atomic_dec(&nmi_active);
+}
+
int __init check_nmi_watchdog(void)
{
unsigned int *prev_nmi_count;
for_each_online_cpu(cpu) {
if (!per_cpu(wd_enabled, cpu))
continue;
- if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- get_nmi_count(cpu));
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
+ if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+ report_broken_nmi(cpu, prev_nmi_count);
}
endflag = 1;
if (!atomic_read(&nmi_active)) {
* Function for kdump case. Get the tce tables from first kernel
* by reading the contents of the base adress register of calgary iommu
*/
-static void get_tce_space_from_tar(void)
+static void __init get_tce_space_from_tar(void)
{
int bus;
void __iomem *target;
{
/* This must be done before dead CPU ack */
cpu_exit_clear();
- wbinvd();
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
* With physical CPU hotplug, we should halt the cpu
*/
local_irq_disable();
- while (1)
- halt();
+ /* mask all interrupts, flush any and all caches, and halt */
+ wbinvd_halt();
}
#else
static inline void play_dead(void)
static inline void play_dead(void)
{
idle_task_exit();
- wbinvd();
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
local_irq_disable();
- while (1)
- halt();
+ /* mask all interrupts, flush any and all caches, and halt */
+ wbinvd_halt();
}
#else
static inline void play_dead(void)
#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
#define PAE_PGD_ATTR (_PAGE_PRESENT)
-/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
- * used to save some data for jumping back
+/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
*/
-#define DATA(offset) (PAGE_SIZE/2+(offset))
+#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
/* Minimal CPU state */
#define ESP DATA(0x0)
popl %ebx
popl %ebp
ret
+
+ .globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
* @size: Size of the crashkernel memory to reserve.
* Returns the base address on success, and -1ULL on failure.
*/
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
{
const unsigned long long alignment = 16<<20; /* 16M */
unsigned long long start = 0LL;
clts();
task_thread_info(current)->status |= TS_USEDFPU;
}
- return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+ err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+ if (unlikely(err)) {
+ /*
+ * Encountered an error while doing the restore from the
+ * user buffer, clear the fpu state.
+ */
+ clear_fpu(tsk);
+ clear_used_math();
+ }
+ return err;
}
/*
}
#ifdef CONFIG_X86_64
+
+/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
+static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
+{
+ if (!after_bootmem)
+ free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
+}
+
/*
* Allocate node local memory for the AP pda.
*
if (oldpda) {
memcpy(newpda, oldpda, size);
- if (!after_bootmem)
- free_bootmem((unsigned long)oldpda, size);
+ free_bootmem_pda(oldpda);
}
newpda->in_bootmem = 0;
flush_tlb_all();
low_mappings = 1;
-#ifdef CONFIG_X86_PC
- if (def_to_bigsmp && apicid > 8) {
- printk(KERN_WARNING
- "More than 8 CPUs detected - skipping them.\n"
- "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
- err = -1;
- } else
- err = do_boot_cpu(apicid, cpu);
-#else
err = do_boot_cpu(apicid, cpu);
-#endif
zap_low_mappings();
low_mappings = 0;
static int __init smp_sanity_check(unsigned max_cpus)
{
preempt_disable();
+
+#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+ if (def_to_bigsmp && nr_cpu_ids > 8) {
+ unsigned int cpu;
+ unsigned nr;
+
+ printk(KERN_WARNING
+ "More than 8 CPUs detected - skipping them.\n"
+ "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+
+ nr = 0;
+ for_each_present_cpu(cpu) {
+ if (nr >= 8)
+ cpu_clear(cpu, cpu_present_map);
+ nr++;
+ }
+
+ nr = 0;
+ for_each_possible_cpu(cpu) {
+ if (nr >= 8)
+ cpu_clear(cpu, cpu_possible_map);
+ nr++;
+ }
+
+ nr_cpu_ids = 8;
+ }
+#endif
+
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
"by the BIOS.\n", hard_smp_processor_id());
BUG();
}
#endif
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
- extern unsigned int maxcpus;
-
- if (arg)
- maxcpus = simple_strtoul(arg, NULL, 0);
- return 0;
-}
-early_param("maxcpus", parse_maxcpus);
DEFINE_PER_CPU(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-/* Initialize the CPU's GDT. This is either the boot CPU doing itself
- (still using the master per-cpu area), or a CPU doing it for a
- secondary which will soon come up. */
+/*
+ * Initialize the CPU's GDT. This is either the boot CPU doing itself
+ * (still using the master per-cpu area), or a CPU doing it for a
+ * secondary which will soon come up.
+ */
__cpuinit void init_gdt(int cpu)
{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+ struct desc_struct gdt;
- pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
- __per_cpu_offset[cpu], 0xFFFFF,
+ pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
0x2 | DESCTYPE_S, 0x8);
+ gdt.s = 1;
- gdt[GDT_ENTRY_PERCPU].s = 1;
+ write_gdt_entry(get_cpu_gdt_table(cpu),
+ GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(cpu_number, cpu) = cpu;
}
clts(); /* Allow maths ops (or we recurse) */
- restore_fpu_checking(&me->thread.xstate->fxsave);
+ /*
+ * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+ */
+ if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) {
+ stts();
+ force_sig(SIGSEGV, me);
+ return;
+ }
task_thread_info(me)->status |= TS_USEDFPU;
me->fpu_counter++;
}
/*
* Read TSC and the reference counters. Take care of SMI disturbance
*/
-static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *pm, u64 *hpet)
{
u64 t1, t2;
int i;
return 1;
}
-extern unsigned int __cpuinitdata maxcpus;
-
/*
* The Visual Workstation is Intel MP compliant in the hardware
* sense, but it doesn't have a BIOS(-configuration table).
ncpus = CO_CPU_MAX;
}
- if (ncpus > maxcpus)
- ncpus = maxcpus;
+ if (ncpus > setup_max_cpus)
+ ncpus = setup_max_cpus;
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
DWARF_DEBUG
}
+
+#ifdef CONFIG_KEXEC
+/* Link time checks */
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-int direct_gbpages __meminitdata
+int direct_gbpages
#ifdef CONFIG_DIRECT_GBPAGES
= 1
#endif
int after_bootmem;
-static __init void *spp_getpage(void)
+/*
+ * NOTE: This function is marked __ref because it calls __init function
+ * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
+ */
+static __ref void *spp_getpage(void)
{
void *ptr;
{
unsigned long pages = 0;
unsigned long last_map_addr = end;
+ unsigned long start = address;
int i = pmd_index(address);
if (!pmd_large(*pmd))
last_map_addr = phys_pte_update(pmd, address,
end);
+ /* Count entries we're using from level2_ident_pgt */
+ if (start == 0)
+ pages++;
continue;
}
phys_addr &= PAGE_MASK;
size = PAGE_ALIGN(last_addr+1) - phys_addr;
- retval = reserve_memtype(phys_addr, phys_addr + size,
+ retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
prot_val, &new_prot_val);
if (retval) {
pr_debug("Warning: reserve_memtype returned %d\n", retval);
failed += print_split(&sc);
if (failed) {
- printk(KERN_ERR "NOT PASSED. Please report.\n");
- WARN_ON(1);
+ WARN(1, KERN_ERR "NOT PASSED. Please report.\n");
return -EINVAL;
} else {
if (print)
int arch_report_meminfo(char *page)
{
- int n = sprintf(page, "DirectMap4k: %8lu\n"
- "DirectMap2M: %8lu\n",
- direct_pages_count[PG_LEVEL_4K],
- direct_pages_count[PG_LEVEL_2M]);
+ int n = sprintf(page, "DirectMap4k: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_4K] << 2);
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+ n += sprintf(page + n, "DirectMap2M: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_2M] << 11);
+#else
+ n += sprintf(page + n, "DirectMap4M: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_2M] << 12);
+#endif
#ifdef CONFIG_X86_64
- n += sprintf(page + n, "DirectMap1G: %8lu\n",
- direct_pages_count[PG_LEVEL_1G]);
+ if (direct_gbpages)
+ n += sprintf(page + n, "DirectMap1G: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_1G] << 20);
#endif
return n;
}
if (!pte_val(old_pte)) {
if (!primary)
return 0;
- printk(KERN_WARNING "CPA: called for zero pte. "
+ WARN(1, KERN_WARNING "CPA: called for zero pte. "
"vaddr = %lx cpa->vaddr = %lx\n", address,
cpa->vaddr);
- WARN_ON(1);
return -EINVAL;
}
* start of the node, and that the current "end" address is after
* the previous one.
*/
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
{
/*
* Only add present memory as told by the e820.
if (memory_chunk->start_pfn >= max_pfn) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
memory_chunk->start_pfn, memory_chunk->end_pfn);
- return;
+ return -1;
}
if (memory_chunk->nid != nid)
- return;
+ return -1;
if (!node_has_online_mem(nid))
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_end_pfn[nid] < memory_chunk->end_pfn)
node_end_pfn[nid] = memory_chunk->end_pfn;
+
+ return 0;
}
int __init get_memcfg_from_srat(void)
printk(KERN_DEBUG
"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
- node_read_chunk(chunk->nid, chunk);
+ if (node_read_chunk(chunk->nid, chunk))
+ continue;
+
e820_register_active_regions(chunk->nid, chunk->start_pfn,
min(chunk->end_pfn, max_pfn));
}
case PCI_DEVICE_ID_INTEL_ICH10_1:
case PCI_DEVICE_ID_INTEL_ICH10_2:
case PCI_DEVICE_ID_INTEL_ICH10_3:
+ case PCI_DEVICE_ID_INTEL_PCH_0:
+ case PCI_DEVICE_ID_INTEL_PCH_1:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
int n, devfn;
long node;
- if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+ if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
return;
DBG("PCI: Peer bridge fixup\n");
return AE_OK;
}
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
{
struct resource mcfg_res;
return mcfg_res.flags;
}
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+ u64 addr, u64 size, int i,
+ typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+ u64 old_size = size;
+ int valid = 0;
+
+ while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+ size >>= 1;
+ if (size < (16UL<<20))
+ break;
+ }
+
+ if (size >= (16UL<<20) || size == old_size) {
+ printk(KERN_NOTICE
+ "PCI: MCFG area at %Lx reserved in %s\n",
+ addr, with_e820?"E820":"ACPI motherboard resources");
+ valid = 1;
+
+ if (old_size != size) {
+ /* update end_bus_number */
+ cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+ printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+ "segment %hu buses %u - %u\n",
+ i, (unsigned long)cfg->address, cfg->pci_segment,
+ (unsigned int)cfg->start_bus_number,
+ (unsigned int)cfg->end_bus_number);
+ }
+ }
+
+ return valid;
+}
+
static void __init pci_mmcfg_reject_broken(int early)
{
typeof(pci_mmcfg_config[0]) *cfg;
for (i = 0; i < pci_mmcfg_config_num; i++) {
int valid = 0;
- u32 size = (cfg->end_bus_number + 1) << 20;
+ u64 addr, size;
+
cfg = &pci_mmcfg_config[i];
+ addr = cfg->start_bus_number;
+ addr <<= 20;
+ addr += cfg->address;
+ size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+ size <<= 20;
printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
"segment %hu buses %u - %u\n",
i, (unsigned long)cfg->address, cfg->pci_segment,
(unsigned int)cfg->start_bus_number,
(unsigned int)cfg->end_bus_number);
- if (!early &&
- is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
- printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
- "in ACPI motherboard resources\n",
- cfg->address);
- valid = 1;
- }
+ if (!early)
+ valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
if (valid)
continue;
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
" reserved in ACPI motherboard resources\n",
cfg->address);
+
/* Don't try to do this check unless configuration
type 1 is available. how about type 2 ?*/
- if (raw_pci_ops && e820_all_mapped(cfg->address,
- cfg->address + size - 1,
- E820_RESERVED)) {
- printk(KERN_NOTICE
- "PCI: MCFG area at %Lx reserved in E820\n",
- cfg->address);
- valid = 1;
- }
+ if (raw_pci_ops)
+ valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
if (!valid)
goto reject;
return;
reject:
- printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
pci_mmcfg_arch_free();
kfree(pci_mmcfg_config);
pci_mmcfg_config = NULL;
ctxt->cr0 = read_cr0();
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
- ctxt->cr4 = read_cr4();
+ ctxt->cr4 = read_cr4_safe();
}
/* Needed by apm.c */
/*
* control registers
*/
- write_cr4(ctxt->cr4);
+ /* cr4 was introduced in the Pentium CPU */
+ if (ctxt->cr4)
+ write_cr4(ctxt->cr4);
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
ret
ENTRY(restore_image)
- movl resume_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl resume_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
movl restore_pblist, %edx
.p2align 4,,7
done:
/* go back to the original page tables */
- movl $swapper_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl $swapper_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
/* Flush TLB, including "global" things (vmalloc) */
- movl mmu_cr4_features, %eax
- movl %eax, %edx
+ movl mmu_cr4_features, %ecx
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %edx
andl $~(1<<7), %edx; # PGE
movl %edx, %cr4; # turn off PGE
- movl %cr3, %ecx; # flush TLB
- movl %ecx, %cr3
- movl %eax, %cr4; # turn PGE back on
+1:
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %cr4; # turn PGE back on
+1:
movl saved_context_esp, %esp
movl saved_context_ebp, %ebp
*/
static int handle_eject_request(struct dock_station *ds, u32 event)
{
- if (!dock_present(ds))
- return -ENODEV;
-
if (dock_in_progress(ds))
return -EBUSY;
* here we need to generate the undock
* event prior to actually doing the undock
* so that the device struct still exists.
+ * Also, even send the dock event if the
+ * device is not present anymore
*/
dock_event(ds, event, UNDOCK_EVENT);
+
+ if (!dock_present(ds)) {
+ complete_undock(ds);
+ return -ENODEV;
+ }
+
hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
undock(ds);
eject_dock(ds);
u8 handlers_installed;
} *boot_ec, *first_ec;
+/*
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+ printk(KERN_NOTICE PREFIX "%s detected - "
+ "ECDT has exchanged control/data I/O address\n",
+ id->ident);
+ return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+ {
+ print_ecdt_error, "Asus L4R", {
+ DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+ DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+ {
+ print_ecdt_error, "Asus M6R", {
+ DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+ DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+ {},
+};
+
/* --------------------------------------------------------------------------
Transaction Management
-------------------------------------------------------------------------- */
return 0;
msleep(1);
}
+ if (acpi_ec_check_status(ec,event))
+ return 0;
}
pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
acpi_ec_read_status(ec),
pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
+ if (dmi_check_system(ec_dmi_table)) {
+ /*
+ * If the board falls into ec_dmi_table, it means
+ * that ECDT table gives the incorrect command/status
+ * & data I/O address. Just fix it.
+ */
+ boot_ec->data_addr = ecdt_ptr->control.address;
+ boot_ec->command_addr = ecdt_ptr->data.address;
+ }
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
acpi_tb_set_table_loaded_flag(table_index, FALSE);
+ /* Table unloaded, remove a reference to the ddb_handle object */
+
+ acpi_ut_remove_reference(ddb_handle);
return_ACPI_STATUS(AE_OK);
}
* Size - Size of the pathname
* *name_buffer - Where to return the pathname
*
- * RETURN: Places the pathname into the name_buffer, in external format
+ * RETURN: Status
+ * Places the pathname into the name_buffer, in external format
* (name segments separated by path separators)
*
* DESCRIPTION: Generate a full pathaname
*
******************************************************************************/
-void
+acpi_status
acpi_ns_build_external_path(struct acpi_namespace_node *node,
acpi_size size, char *name_buffer)
{
if (index < ACPI_NAME_SIZE) {
name_buffer[0] = AML_ROOT_PREFIX;
name_buffer[1] = 0;
- return;
+ return (AE_OK);
}
/* Store terminator byte, then build name backwards */
if (index != 0) {
ACPI_ERROR((AE_INFO,
- "Could not construct pathname; index=%X, size=%X, Path=%s",
+ "Could not construct external pathname; index=%X, size=%X, Path=%s",
(u32) index, (u32) size, &name_buffer[size]));
+
+ return (AE_BAD_PARAMETER);
}
- return;
+ return (AE_OK);
}
#ifdef ACPI_DEBUG_OUTPUT
char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
{
+ acpi_status status;
char *name_buffer;
acpi_size size;
size = acpi_ns_get_pathname_length(node);
if (!size) {
- ACPI_ERROR((AE_INFO, "Invalid node failure"));
- return_PTR(NULL);
+ return (NULL);
}
/* Allocate a buffer to be returned to caller */
/* Build the path in the allocated buffer */
- acpi_ns_build_external_path(node, size, name_buffer);
+ status = acpi_ns_build_external_path(node, size, name_buffer);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
return_PTR(name_buffer);
}
#endif
while (next_node && (next_node != acpi_gbl_root_node)) {
if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
ACPI_ERROR((AE_INFO,
- "Invalid NS Node (%p) while traversing path",
+ "Invalid Namespace Node (%p) while traversing namespace",
next_node));
return 0;
}
required_size = acpi_ns_get_pathname_length(node);
if (!required_size) {
- ACPI_ERROR((AE_INFO, "Invalid node failure"));
- return_ACPI_STATUS(AE_ERROR);
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Validate/Allocate/Clear caller buffer */
/* Build the path in the caller buffer */
- acpi_ns_build_external_path(node, required_size, buffer->pointer);
+ status =
+ acpi_ns_build_external_path(node, required_size, buffer->pointer);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
(char *)buffer->pointer, (u32) required_size));
if (irq < 0)
continue;
- if (irq >= ACPI_MAX_IRQS)
+ if (irq >= ARRAY_SIZE(acpi_irq_penalty))
continue;
if (used)
*/
void acpi_penalize_isa_irq(int irq, int active)
{
- if (active)
- acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
- else
- acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+ if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+ if (active)
+ acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+ else
+ acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+ }
}
/*
static int set_no_mwait(const struct dmi_system_id *id)
{
printk(KERN_NOTICE PREFIX "%s detected - "
- "disable mwait for CPU C-stetes\n", id->ident);
+ "disabling mwait for CPU C-states\n", id->ident);
idle_nomwait = 1;
return 0;
}
#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
* 0 -> cpufreq low level drivers initialized -> consider _PPC values
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
-static unsigned int ignore_ppc = -1;
+static int ignore_ppc = -1;
module_param(ignore_ppc, uint, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
} else {
temp_size_needed +=
acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+ if (!temp_size_needed) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
}
} else {
/*
{
acpi_status status = AE_OK;
- if (!required_length) {
- WARN_ON(1);
- return AE_ERROR;
+ /* Parameter validation */
+
+ if (!buffer || !required_length) {
+ return (AE_BAD_PARAMETER);
}
+
switch (buffer->length) {
case ACPI_NO_BUFFER:
obj_pointer = object->package.elements;
break;
+ /*
+ * These objects have a possible list of notify handlers.
+ * Device object also may have a GPE block.
+ */
case ACPI_TYPE_DEVICE:
if (object->device.gpe_block) {
gpe_block);
}
- /* Walk the handler list for this device */
+ /*lint -fallthrough */
+
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_THERMAL:
+
+ /* Walk the notify handler list for this object */
- handler_desc = object->device.handler;
+ handler_desc = object->common_notify.handler;
while (handler_desc) {
next_desc = handler_desc->address_space.next;
acpi_ut_remove_reference(handler_desc);
acpi_size * obj_length)
{
acpi_size length;
+ acpi_size size;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
* Get the actual length of the full pathname to this object.
* The reference will be converted to the pathname to the object
*/
- length +=
- ACPI_ROUND_UP_TO_NATIVE_WORD
- (acpi_ns_get_pathname_length
- (internal_object->reference.node));
+ size =
+ acpi_ns_get_pathname_length(internal_object->
+ reference.node);
+ if (!size) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
break;
default:
strcpy(method, "WQ");
strncat(method, block->object_id, 2);
- status = acpi_evaluate_object(handle, method, NULL, out);
+ status = acpi_evaluate_object(handle, method, &input, out);
/*
* If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
list_del(&brd->brd_list);
brd_free(brd);
}
+ unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
- unregister_blkdev(RAMDISK_MAJOR, "brd");
return -ENOMEM;
}
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
- nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
- if (!nbd_dev)
- return -ENOMEM;
-
if (max_part < 0) {
printk(KERN_CRIT "nbd: max_part must be >= 0\n");
return -EINVAL;
}
+ nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+ if (!nbd_dev)
+ return -ENOMEM;
+
part_shift = 0;
if (max_part > 0)
part_shift = fls(max_part);
blk_cleanup_queue(nbd_dev[i].disk->queue);
put_disk(nbd_dev[i].disk);
}
+ kfree(nbd_dev);
return err;
}
}
}
unregister_blkdev(NBD_MAJOR, "nbd");
+ kfree(nbd_dev);
printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
}
depends on BT
config BT_HCIUSB
- tristate "HCI USB driver"
- depends on USB
+ tristate "HCI USB driver (old version)"
+ depends on USB && BT_HCIBTUSB=n
help
Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with
Say Y here to compile support for SCO over HCI USB.
config BT_HCIBTUSB
- tristate "HCI USB driver (alternate version)"
- depends on USB && EXPERIMENTAL && BT_HCIUSB=n
+ tristate "HCI USB driver"
+ depends on USB
help
Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with
USB interface.
- This driver is still experimental and has no SCO support.
-
Say Y here to compile support for Bluetooth USB devices into the
kernel or say M to compile it as module (btusb).
/* ======================== Module parameters ======================== */
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("BT3CPCC.bin");
*
* Generic Bluetooth USB driver
*
- * Copyright (C) 2005-2007 Marcel Holtmann <marcel@holtmann.org>
+ * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
#define BT_DBG(D...)
#endif
-#define VERSION "0.2"
+#define VERSION "0.3"
static int ignore_dga;
static int ignore_csr;
{ } /* Terminating entry */
};
+#define BTUSB_MAX_ISOC_FRAMES 10
+
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
+#define BTUSB_ISOC_RUNNING 2
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
+ struct usb_interface *isoc;
spinlock_t lock;
struct usb_anchor tx_anchor;
struct usb_anchor intr_anchor;
struct usb_anchor bulk_anchor;
+ struct usb_anchor isoc_anchor;
struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
struct usb_endpoint_descriptor *bulk_rx_ep;
+ struct usb_endpoint_descriptor *isoc_tx_ep;
+ struct usb_endpoint_descriptor *isoc_rx_ep;
+
+ int isoc_altsetting;
};
static void btusb_intr_complete(struct urb *urb)
return;
if (urb->status == 0) {
+ hdev->stat.byte_rx += urb->actual_length;
+
if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
urb->transfer_buffer,
urb->actual_length) < 0) {
}
}
-static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
+static int btusb_submit_intr_urb(struct hci_dev *hdev)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
BT_DBG("%s", hdev->name);
+ if (!data->intr_ep)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
return;
if (urb->status == 0) {
+ hdev->stat.byte_rx += urb->actual_length;
+
if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
urb->transfer_buffer,
urb->actual_length) < 0) {
}
}
-static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
+static int btusb_submit_bulk_urb(struct hci_dev *hdev)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
BT_DBG("%s", hdev->name);
+ if (!data->bulk_rx_ep)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
return err;
}
+static void btusb_isoc_complete(struct urb *urb)
+{
+ struct hci_dev *hdev = urb->context;
+ struct btusb_data *data = hdev->driver_data;
+ int i, err;
+
+ BT_DBG("%s urb %p status %d count %d", hdev->name,
+ urb, urb->status, urb->actual_length);
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return;
+
+ if (urb->status == 0) {
+ for (i = 0; i < urb->number_of_packets; i++) {
+ unsigned int offset = urb->iso_frame_desc[i].offset;
+ unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+ if (urb->iso_frame_desc[i].status)
+ continue;
+
+ hdev->stat.byte_rx += length;
+
+ if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
+ urb->transfer_buffer + offset,
+ length) < 0) {
+ BT_ERR("%s corrupted SCO packet", hdev->name);
+ hdev->stat.err_rx++;
+ }
+ }
+ }
+
+ if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+ return;
+
+ usb_anchor_urb(urb, &data->isoc_anchor);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0) {
+ BT_ERR("%s urb %p failed to resubmit (%d)",
+ hdev->name, urb, -err);
+ usb_unanchor_urb(urb);
+ }
+}
+
+static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+ int i, offset = 0;
+
+ BT_DBG("len %d mtu %d", len, mtu);
+
+ for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+ i++, offset += mtu, len -= mtu) {
+ urb->iso_frame_desc[i].offset = offset;
+ urb->iso_frame_desc[i].length = mtu;
+ }
+
+ if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+ urb->iso_frame_desc[i].offset = offset;
+ urb->iso_frame_desc[i].length = len;
+ i++;
+ }
+
+ urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hdev->driver_data;
+ struct urb *urb;
+ unsigned char *buf;
+ unsigned int pipe;
+ int err, size;
+
+ BT_DBG("%s", hdev->name);
+
+ if (!data->isoc_rx_ep)
+ return -ENODEV;
+
+ urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+
+ size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+ BTUSB_MAX_ISOC_FRAMES;
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf) {
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+ urb->dev = data->udev;
+ urb->pipe = pipe;
+ urb->context = hdev;
+ urb->complete = btusb_isoc_complete;
+ urb->interval = data->isoc_rx_ep->bInterval;
+
+ urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
+ urb->transfer_buffer = buf;
+ urb->transfer_buffer_length = size;
+
+ __fill_isoc_descriptor(urb, size,
+ le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+ usb_anchor_urb(urb, &data->isoc_anchor);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0) {
+ BT_ERR("%s urb %p submission failed (%d)",
+ hdev->name, urb, -err);
+ usb_unanchor_urb(urb);
+ kfree(buf);
+ }
+
+ usb_free_urb(urb);
+
+ return err;
+}
+
static void btusb_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->intr_anchor);
+
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
break;
case HCI_ACLDATA_PKT:
+ if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
break;
case HCI_SCODATA_PKT:
+ if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
+ return -ENODEV;
+
+ urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
+ if (!urb)
+ return -ENOMEM;
+
+ pipe = usb_sndisocpipe(data->udev,
+ data->isoc_tx_ep->bEndpointAddress);
+
+ urb->dev = data->udev;
+ urb->pipe = pipe;
+ urb->context = skb;
+ urb->complete = btusb_tx_complete;
+ urb->interval = data->isoc_tx_ep->bInterval;
+
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = skb->data;
+ urb->transfer_buffer_length = skb->len;
+
+ __fill_isoc_descriptor(urb, skb->len,
+ le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+
hdev->stat.sco_tx++;
- kfree_skb(skb);
- return 0;
+ break;
default:
return -EILSEQ;
schedule_work(&data->work);
}
+static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+ struct btusb_data *data = hdev->driver_data;
+ struct usb_interface *intf = data->isoc;
+ struct usb_endpoint_descriptor *ep_desc;
+ int i, err;
+
+ if (!data->isoc)
+ return -ENODEV;
+
+ err = usb_set_interface(data->udev, 1, altsetting);
+ if (err < 0) {
+ BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
+ return err;
+ }
+
+ data->isoc_altsetting = altsetting;
+
+ data->isoc_tx_ep = NULL;
+ data->isoc_rx_ep = NULL;
+
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+ ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+ if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+ data->isoc_tx_ep = ep_desc;
+ continue;
+ }
+
+ if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+ data->isoc_rx_ep = ep_desc;
+ continue;
+ }
+ }
+
+ if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+ BT_ERR("%s invalid SCO descriptors", hdev->name);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static void btusb_work(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
- if (hdev->conn_hash.acl_num == 0) {
+ if (hdev->conn_hash.acl_num > 0) {
+ if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+ if (btusb_submit_bulk_urb(hdev) < 0)
+ clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+ else
+ btusb_submit_bulk_urb(hdev);
+ }
+ } else {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
- return;
}
- if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
- if (btusb_submit_bulk_urb(hdev) < 0)
- clear_bit(BTUSB_BULK_RUNNING, &data->flags);
- else
- btusb_submit_bulk_urb(hdev);
+ if (hdev->conn_hash.sco_num > 0) {
+ if (data->isoc_altsetting != 2) {
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+
+ if (__set_isoc_interface(hdev, 2) < 0)
+ return;
+ }
+
+ if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+ if (btusb_submit_isoc_urb(hdev) < 0)
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ else
+ btusb_submit_isoc_urb(hdev);
+ }
+ } else {
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+
+ __set_isoc_interface(hdev, 0);
}
}
init_usb_anchor(&data->tx_anchor);
init_usb_anchor(&data->intr_anchor);
init_usb_anchor(&data->bulk_anchor);
+ init_usb_anchor(&data->isoc_anchor);
hdev = hci_alloc_dev();
if (!hdev) {
hdev->owner = THIS_MODULE;
+ /* interface numbers are hardcoded in the spec */
+ data->isoc = usb_ifnum_to_if(data->udev, 1);
+
if (reset || id->driver_info & BTUSB_RESET)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
}
+ if (id->driver_info & BTUSB_BROKEN_ISOC)
+ data->isoc = NULL;
+
if (id->driver_info & BTUSB_SNIFFER) {
- struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_device *udev = data->udev;
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+ data->isoc = NULL;
}
if (id->driver_info & BTUSB_BCM92035) {
}
}
+ if (data->isoc) {
+ err = usb_driver_claim_interface(&btusb_driver,
+ data->isoc, NULL);
+ if (err < 0) {
+ hci_free_dev(hdev);
+ kfree(data);
+ return err;
+ }
+ }
+
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);
hdev = data->hdev;
+ if (data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->isoc);
+
usb_set_intfdata(intf, NULL);
hci_unregister_dev(hdev);
module_param(reset, bool, 0644);
MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
#endif
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(minor, int, 0444);
MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
ENSURE(get_last_session, CDC_MULTI_SESSION);
ENSURE(get_mcn, CDC_MCN);
ENSURE(reset, CDC_RESET);
- ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
ENSURE(generic_packet, CDC_GENERIC_PACKET);
cdi->mc_flags = 0;
cdo->n_minors = 0;
/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&q, argp, sizeof(q)))
return -EFAULT;
/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&header, argp, sizeof(header)))
return -EFAULT;
/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&entry, argp, sizeof(entry)))
return -EFAULT;
return err;
}
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+ void *arg)
+{
+ return -EINVAL;
+}
+
static struct cdrom_device_ops gdrom_ops = {
.open = gdrom_open,
.release = gdrom_release,
.media_changed = gdrom_mediachanged,
.get_last_session = gdrom_get_last_session,
.reset = gdrom_hardreset,
+ .audio_ioctl = gdrom_audio_ioctl,
.capability = CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
.n_minors = 1,
}
}
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+ void *arg)
+{
+ return -EINVAL;
+}
+
static struct cdrom_device_ops viocd_dops = {
.open = viocd_open,
.release = viocd_release,
.media_changed = viocd_media_changed,
.lock_door = viocd_lock_door,
.generic_packet = viocd_packet,
+ .audio_ioctl = viocd_audio_ioctl,
.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
};
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return;
-
#ifdef CONFIG_PPC_MERGE
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
info->addr_source = NULL;
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/uaccess.h>
-#include <linux/version.h>
#include "tty.h"
#include "network.h"
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
}
/**
- * tiocswinsz - implement window size set ioctl
- * @tty; tty
- * @arg: user buffer for result
+ * tty_do_resize - resize event
+ * @tty: tty being resized
+ * @real_tty: real tty (if using a pty/tty pair)
+ * @rows: rows (character)
+ * @cols: cols (character)
*
- * Copies the user idea of the window size to the kernel. Traditionally
- * this is just advisory information but for the Linux console it
- * actually has driver level meaning and triggers a VC resize.
- *
- * Locking:
- * Called function use the console_sem is used to ensure we do
- * not try and resize the console twice at once.
- * The tty->termios_mutex is used to ensure we don't double
- * resize and get confused. Lock order - tty->termios_mutex before
- * console sem
+ * Update the termios variables and send the neccessary signals to
+ * peform a terminal resize correctly
*/
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
- struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws)
{
- struct winsize tmp_ws;
struct pid *pgrp, *rpgrp;
unsigned long flags;
- if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
- return -EFAULT;
-
mutex_lock(&tty->termios_mutex);
- if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+ if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
-
-#ifdef CONFIG_VT
- if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
- if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
- tmp_ws.ws_row)) {
- mutex_unlock(&tty->termios_mutex);
- return -ENXIO;
- }
- }
-#endif
/* Get the PID values and reference them so we can
avoid holding the tty ctrl lock while sending signals */
spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(pgrp);
put_pid(rpgrp);
- tty->winsize = tmp_ws;
- real_tty->winsize = tmp_ws;
+ tty->winsize = *ws;
+ real_tty->winsize = *ws;
done:
mutex_unlock(&tty->termios_mutex);
return 0;
}
+/**
+ * tiocswinsz - implement window size set ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the user idea of the window size to the kernel. Traditionally
+ * this is just advisory information but for the Linux console it
+ * actually has driver level meaning and triggers a VC resize.
+ *
+ * Locking:
+ * Driver dependant. The default do_resize method takes the
+ * tty termios mutex and ctrl_lock. The console takes its own lock
+ * then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize __user *arg)
+{
+ struct winsize tmp_ws;
+ if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+ return -EFAULT;
+
+ if (tty->ops->resize)
+ return tty->ops->resize(tty, real_tty, &tmp_ws);
+ else
+ return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
/**
* tioccons - allow admin to move logical console
* @file: the file to become console
*/
#define VC_RESIZE_MAXCOL (32767)
#define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ * vc_do_resize - resizing method for the tty
+ * @tty: tty being resized
+ * @real_tty: real tty (different to tty if a pty/tty pair)
+ * @vc: virtual console private data
+ * @cols: columns
+ * @lines: lines
+ *
+ * Resize a virtual console, clipping according to the actual constraints.
+ * If the caller passes a tty structure then update the termios winsize
+ * information and perform any neccessary signal handling.
+ *
+ * Caller must hold the console semaphore. Takes the termios mutex and
+ * ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct vc_data *vc, unsigned int cols, unsigned int lines)
{
unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
unsigned int old_cols, old_rows, old_row_size, old_screen_size;
gotoxy(vc, vc->vc_x, vc->vc_y);
save_cur(vc);
- if (vc->vc_tty) {
- struct winsize ws, *cws = &vc->vc_tty->winsize;
- struct pid *pgrp = NULL;
-
+ if (tty) {
+ /* Rewrite the requested winsize data with the actual
+ resulting sizes */
+ struct winsize ws;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
ws.ws_col = vc->vc_cols;
ws.ws_ypixel = vc->vc_scan_lines;
-
- spin_lock_irq(&vc->vc_tty->ctrl_lock);
- if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
- pgrp = get_pid(vc->vc_tty->pgrp);
- spin_unlock_irq(&vc->vc_tty->ctrl_lock);
- if (pgrp) {
- kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
- put_pid(pgrp);
- }
- *cws = ws;
+ tty_do_resize(tty, real_tty, &ws);
}
if (CON_IS_VISIBLE(vc))
return err;
}
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ * vc_resize - resize a VT
+ * @vc: virtual console
+ * @cols: columns
+ * @rows: rows
+ *
+ * Resize a virtual console as seen from the console end of things. We
+ * use the common vc_do_resize methods to update the structures. The
+ * caller must hold the console sem to protect console internals and
+ * vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+ return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ * vt_resize - resize a VT
+ * @tty: tty to resize
+ * @real_tty: tty if a pty/tty pair
+ * @ws: winsize attributes
+ *
+ * Resize a virtual terminal. This is called by the tty layer as we
+ * register our own handler for resizing. The mutual helper does all
+ * the actual work.
+ *
+ * Takes the console sem and the called methods then take the tty
+ * termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws)
{
- int rc;
+ struct vc_data *vc = tty->driver_data;
+ int ret;
acquire_console_sem();
- rc = vc_resize(vc, cols, lines);
+ ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
release_console_sem();
- return rc;
+ return ret;
}
void vc_deallocate(unsigned int currcons)
.start = con_start,
.throttle = con_throttle,
.unthrottle = con_unthrottle,
+ .resize = vt_resize,
};
int __init vty_init(void)
EXPORT_SYMBOL(update_region);
EXPORT_SYMBOL(redraw_screen);
EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
EXPORT_SYMBOL(fg_console);
EXPORT_SYMBOL(console_blank_hook);
EXPORT_SYMBOL(console_blanked);
get_user(cc, &vtsizes->v_cols))
ret = -EFAULT;
else {
+ acquire_console_sem();
for (i = 0; i < MAX_NR_CONSOLES; i++) {
vc = vc_cons[i].d;
if (vc) {
vc->vc_resize_user = 1;
- vc_lock_resize(vc_cons[i].d, cc, ll);
+ vc_resize(vc_cons[i].d, cc, ll);
}
}
+ release_console_sem();
}
break;
}
* currently programmed in the FPGA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
struct ladder_device_state *last_state;
int last_residency, last_idx = ldev->last_state_idx;
+ int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
if (unlikely(!ldev))
return 0;
+ /* Special case when user has set very strict latency requirement */
+ if (unlikely(latency_req == 0)) {
+ ladder_do_selection(ldev, last_idx, 0);
+ return 0;
+ }
+
last_state = &ldev->states[last_idx];
if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
/* consider promotion */
if (last_idx < dev->state_count - 1 &&
last_residency > last_state->threshold.promotion_time &&
- dev->states[last_idx + 1].exit_latency <=
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+ dev->states[last_idx + 1].exit_latency <= latency_req) {
last_state->stats.promotion_count++;
last_state->stats.demotion_count = 0;
if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
}
/* consider demotion */
- if (last_idx > 0 &&
+ if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+ dev->states[last_idx].exit_latency > latency_req) {
+ int i;
+
+ for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+ if (dev->states[i].exit_latency <= latency_req)
+ break;
+ }
+ ladder_do_selection(ldev, last_idx, i);
+ return i;
+ }
+
+ if (last_idx > CPUIDLE_DRIVER_STATE_START &&
last_residency < last_state->threshold.demotion_time) {
last_state->stats.demotion_count++;
last_state->stats.promotion_count = 0;
struct ladder_device_state *lstate;
struct cpuidle_state *state;
- ldev->last_state_idx = 0;
+ ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
for (i = 0; i < dev->state_count; i++) {
state = &dev->states[i];
static int menu_select(struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
+ int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
int i;
+ /* Special case when user has set very strict latency requirement */
+ if (unlikely(latency_req == 0)) {
+ data->last_state_idx = 0;
+ return 0;
+ }
+
/* determine the expected residency time */
data->expected_us =
(u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
/* find the deepest idle state that satisfies our constraints */
- for (i = 1; i < dev->state_count; i++) {
+ for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
struct cpuidle_state *s = &dev->states[i];
if (s->target_residency > data->expected_us)
break;
if (s->target_residency > data->predicted_us)
break;
- if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+ if (s->exit_latency > latency_req)
break;
}
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int last_idx = data->last_state_idx;
- unsigned int measured_us =
- cpuidle_get_last_residency(dev) + data->elapsed_us;
+ unsigned int last_idle_us = cpuidle_get_last_residency(dev);
struct cpuidle_state *target = &dev->states[last_idx];
+ unsigned int measured_us;
/*
* Ugh, this idle state doesn't support residency measurements, so we
* for one full standard timer tick. However, be aware that this
* could potentially result in a suboptimal state transition.
*/
- if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
- measured_us = USEC_PER_SEC / HZ;
+ if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+ last_idle_us = USEC_PER_SEC / HZ;
+
+ /*
+ * measured_us and elapsed_us are the cumulative idle time, since the
+ * last time we were woken out of idle by an interrupt.
+ */
+ if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+ measured_us = data->elapsed_us + last_idle_us;
+ else
+ measured_us = -1;
+
+ /* Predict time until next break event */
+ data->predicted_us = max(measured_us, data->last_measured_us);
- /* Predict time remaining until next break event */
- if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
- data->predicted_us = max(measured_us, data->last_measured_us);
+ if (last_idle_us + BREAK_FUZZ <
+ data->expected_us - target->exit_latency) {
data->last_measured_us = measured_us;
data->elapsed_us = 0;
} else {
- if (data->elapsed_us < data->elapsed_us + measured_us)
- data->elapsed_us = measured_us;
- else
- data->elapsed_us = -1;
- data->predicted_us = max(measured_us, data->last_measured_us);
+ data->elapsed_us = measured_us;
}
}
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
#include "mv_xor.h"
static void mv_xor_issue_pending(struct dma_chan *chan);
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
- Please read http://wiki.linux1394.org/JujuMigration before you
- enable the new stack.
+ Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+ before you enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core.
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
This driver can also be built as a module. If so, the module
will be called ad7418.
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
/*
- abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+ abituguru3.c
+
+ Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
struct abituguru3_motherboard_info {
u16 id;
- const char *name;
+ const char *dmi_name;
/* + 1 -> end of sensors indicated by a sensor with name == NULL */
struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
};
/* Constants */
static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
- { 0x000C, "unknown", {
+ { 0x000C, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX1 Fan", 35, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000D, "Abit AW8", {
+ { 0x000D, NULL /* Abit AW8, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000E, "AL-8", {
+ { 0x000E, NULL /* AL-8, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000F, "unknown", {
+ { 0x000F, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0010, "Abit NI8 SLI GR", {
+ { 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "OTES1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0011, "Abit AT8 32X", {
+ { 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX2 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0012, "Abit AN8 32X", {
+ { 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, "Abit AW8D", {
+ { 0x0013, NULL /* Abit AW8D, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0014, "Abit AB9 Pro", {
+ { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0015, "unknown", {
+ { 0x0015, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0016, "AW9D-MAX", {
+ { 0x0016, NULL /* AW9D-MAX, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "OTES1 Fan", 38, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0017, "unknown", {
+ { 0x0017, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 FAN", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0018, "unknown", {
+ { 0x0018, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0019, "unknown", {
+ { 0x0019, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 7, 0, 10, 1, 0 },
{ "DDR2", 13, 0, 20, 1, 0 },
{ "DDR2 VTT", 14, 0, 10, 1, 0 },
{ "AUX3 FAN", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001A, "Abit IP35 Pro", {
+ { 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX4 Fan", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001B, "unknown", {
+ { 0x001B, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR3", 1, 0, 20, 1, 0 },
{ "DDR3 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001C, "unknown", {
+ { 0x001C, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
goto abituguru3_probe_error;
}
data->sensors = abituguru3_motherboards[i].sensors;
+
printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
- "ID: %04X (%s)\n", (unsigned int)id,
- abituguru3_motherboards[i].name);
+ "ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+ if (!abituguru3_motherboards[i].dmi_name) {
+ printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+ "not detected using DMI. Please send the output of "
+ "\"dmidecode\" to the abituguru3 maintainer"
+ "(see MAINTAINERS)\n");
+ }
+#endif
/* Fill the sysfs attr array */
sysfs_attr_i = 0;
.resume = abituguru3_resume
};
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+ const char *board_vendor, *board_name;
+ int i, err = (force) ? 1 : -ENODEV;
+
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+ return err;
+
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (!board_name)
+ return err;
+
+ for (i = 0; abituguru3_motherboards[i].id; i++) {
+ const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+ if (dmi_name && !strcmp(dmi_name, board_name))
+ break;
+ }
+
+ if (!abituguru3_motherboards[i].id)
+ return 1;
+
+ return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ * DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
static int __init abituguru3_detect(void)
{
/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
if (((data_val == 0x00) || (data_val == 0x08)) &&
((cmd_val == 0xAC) || (cmd_val == 0x05) ||
(cmd_val == 0x55)))
- return ABIT_UGURU3_BASE;
+ return 0;
ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
if (force) {
printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
"present because of \"force\" parameter\n");
- return ABIT_UGURU3_BASE;
+ return 0;
}
/* No uGuru3 found */
static int __init abituguru3_init(void)
{
- int address, err;
struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
- const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
- /* safety check, refuse to load on non Abit motherboards */
- if (!force && (!board_vendor ||
- strcmp(board_vendor, "http://www.abit.com.tw/")))
- return -ENODEV;
-#endif
-
- address = abituguru3_detect();
- if (address < 0)
- return address;
+ int err;
+
+ /* Attempt DMI detection first */
+ err = abituguru3_dmi_detect();
+ if (err < 0)
+ return err;
+
+ /* Fall back to manual detection if there was no exact
+ * board name match, or force was specified.
+ */
+ if (err > 0) {
+ err = abituguru3_detect();
+ if (err)
+ return err;
+ }
err = platform_driver_register(&abituguru3_driver);
if (err)
goto exit;
- abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+ abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+ ABIT_UGURU3_BASE);
if (!abituguru3_pdev) {
printk(KERN_ERR ABIT_UGURU3_NAME
": Device allocation failed\n");
goto exit_driver_unregister;
}
- res.start = address;
- res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+ res.start = ABIT_UGURU3_BASE;
+ res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
res.name = ABIT_UGURU3_NAME;
err = platform_device_add_resources(abituguru3_pdev, &res, 1);
--- /dev/null
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ * and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME "adcxx"
+
+struct adcxx {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ u32 channels;
+ u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+ u8 rx_buf[2];
+ int status;
+ int value;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+ rx_buf, sizeof(rx_buf));
+ if (status < 0) {
+ dev_warn(dev, "spi_write_then_read failed with status %d\n",
+ status);
+ goto out;
+ }
+
+ value = (rx_buf[0] << 8) + rx_buf[1];
+ dev_dbg(dev, "raw value = 0x%x\n", value);
+
+ value = value * adc->reference >> 12;
+ status = sprintf(buf, "%d\n", value);
+out:
+ mutex_unlock(&adc->lock);
+ return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ /* The minimum reference is 0 for this chip family */
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ u32 reference;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ reference = adc->reference;
+
+ mutex_unlock(&adc->lock);
+
+ return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ adc->reference = value;
+
+ mutex_unlock(&adc->lock);
+
+ return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+ return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+ SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+ SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+ SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+ adcxx_set_max, 0),
+ SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+ SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+ struct adcxx *adc;
+ int status;
+ int i;
+
+ adc = kzalloc(sizeof *adc, GFP_KERNEL);
+ if (!adc)
+ return -ENOMEM;
+
+ /* set a default value for the reference */
+ adc->reference = 3300;
+ adc->channels = channels;
+ mutex_init(&adc->lock);
+
+ mutex_lock(&adc->lock);
+
+ dev_set_drvdata(&spi->dev, adc);
+
+ for (i = 0; i < 3 + adc->channels; i++) {
+ status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+ if (status) {
+ dev_err(&spi->dev, "device_create_file failed.\n");
+ goto out_err;
+ }
+ }
+
+ adc->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(adc->hwmon_dev)) {
+ dev_err(&spi->dev, "hwmon_device_register failed.\n");
+ status = PTR_ERR(adc->hwmon_dev);
+ goto out_err;
+ }
+
+ mutex_unlock(&adc->lock);
+ return 0;
+
+out_err:
+ for (i--; i >= 0; i--)
+ device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_unlock(&adc->lock);
+ kfree(adc);
+ return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ int i;
+
+ mutex_lock(&adc->lock);
+ hwmon_device_unregister(adc->hwmon_dev);
+ for (i = 0; i < 3 + adc->channels; i++)
+ device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_unlock(&adc->lock);
+ kfree(adc);
+
+ return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+ .driver = {
+ .name = "adcxx1s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx1s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+ .driver = {
+ .name = "adcxx2s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx2s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+ .driver = {
+ .name = "adcxx4s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx4s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+ .driver = {
+ .name = "adcxx8s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx8s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+ int status;
+ status = spi_register_driver(&adcxx1s_driver);
+ if (status)
+ goto reg_1_failed;
+
+ status = spi_register_driver(&adcxx2s_driver);
+ if (status)
+ goto reg_2_failed;
+
+ status = spi_register_driver(&adcxx4s_driver);
+ if (status)
+ goto reg_4_failed;
+
+ status = spi_register_driver(&adcxx8s_driver);
+ if (status)
+ goto reg_8_failed;
+
+ return status;
+
+reg_8_failed:
+ spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+ spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+ spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+ return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+ spi_unregister_driver(&adcxx1s_driver);
+ spi_unregister_driver(&adcxx2s_driver);
+ spi_unregister_driver(&adcxx4s_driver);
+ spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
"TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
"TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
"TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+ { "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+ "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+ { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+ "Th0S", "Th1H", NULL },
};
/* List of keys used to read/write fan speeds */
{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
/* MacPro: temperature set 4 */
{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+ { .accelerometer = 1, .light = 0, .temperature_set = 6 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
(void*)&applesmc_dmi_data[0]},
- { applesmc_dmi_match, "Apple MacBook", {
+ { applesmc_dmi_match, "Apple MacBook (v2)", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
(void*)&applesmc_dmi_data[1]},
+ { applesmc_dmi_match, "Apple MacBook (v3)", {
+ DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+ (void*)&applesmc_dmi_data[6]},
{ applesmc_dmi_match, "Apple MacBook", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
(void*)&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple iMac", {
+ DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+ (void*)&applesmc_dmi_data[5]},
{ .ident = NULL }
};
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &cpu_data(i);
- /* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+ /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
!((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
- (c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+ (c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+ (c->x86_model == 0x1A))) {
/* supported CPU not found, but report the unknown
family 6 CPU */
* For VRD 10.0 and up, "VRD x.y Design Guide",
* available at http://developer.intel.com/.
*
- * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559,
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
* Table 71. VID Code Voltages
- * AMD Opteron processors don't follow the Intel specifications.
- * I'm going to "make up" 2.4 as the spec number for the Opterons.
- * No good reason just a mnemonic for the 24x Opteron processor
- * series.
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
*
* The 17 specification is in fact Intel Mobile Voltage Positioning -
* (IMVP-II). You can find more information in the datasheet of Max1718
return 0;
return((1600000 - (val - 2) * 6250 + 500) / 1000);
- case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */
+ case 24: /* Athlon64 & Opteron */
+ val &= 0x1f;
+ if (val == 0x1f)
+ return 0;
+ /* fall through */
+ case 25: /* AMD NPT 0Fh */
val &= 0x3f;
return (val < 32) ? 1550 - 25 * val
: 775 - (25 * (val - 31)) / 2;
#ifdef CONFIG_X86
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
static struct vrm_model vrm_models[] = {
{X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* NPT family 0Fh */
{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */
{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
+ (vrm_models[i].eff_model >= 0x10 &&
+ eff_model <= vrm_models[i].eff_model) ||
(vrm_models[i].eff_model==ANY)) &&
(eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
#define MAX_AMBS_PER_CHANNEL 16
#define MAX_AMBS (MAX_MEM_CHANNELS * \
MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT 4
+#define DIMM_MASK 0xF
/*
* Ugly hack: For some reason the highest bit is set if there
* are _any_ DIMMs in the channel. Attempting to read from
* might prevent us from seeing the 16th DIMM in the channel.
*/
#define REAL_MAX_AMBS_PER_CHANNEL 15
-#define KNOBS_PER_AMB 5
+#define KNOBS_PER_AMB 6
static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
{
500 * amb_read_byte(data, amb_reg_temp(attr->index)));
}
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+ attr->index & DIMM_MASK);
+}
+
static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
{
int i, j, k, d = 0;
continue;
d++;
+ /* sysfs label */
+ iattr = data->attrs + data->num_attrs;
+ snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+ "temp%d_label", d);
+ iattr->s_attr.dev_attr.attr.name = iattr->name;
+ iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+ iattr->s_attr.dev_attr.show = show_label;
+ iattr->s_attr.index = k;
+ res = device_create_file(&pdev->dev,
+ &iattr->s_attr.dev_attr);
+ if (res)
+ goto exit_remove;
+ data->num_attrs++;
+
/* Temperature sysfs knob */
iattr = data->attrs + data->num_attrs;
snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
/*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
* Copyright (C) 2008 IBM
*
* Author: Darrick J. Wong <djwong@us.ibm.com>
}
/* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+ &data->energy[which], 8);
+}
+
static void update_aem_energy(struct aem_data *data)
{
- aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+ update_aem_energy_one(data, 0);
if (data->ver_major < 2)
return;
- aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+ update_aem_energy_one(data, 1);
}
/* Update all AEM1 sensors */
return -ETIMEDOUT;
if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
- memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+ memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+ fi_resp->num_instances <= instance_num)
return -ENOENT;
return 0;
struct timespec b, a;
mutex_lock(&data->lock);
- update_aem_energy(data);
+ update_aem_energy_one(data, attr->index);
getnstimeofday(&b);
before = data->energy[attr->index];
return 0;
}
- update_aem_energy(data);
+ update_aem_energy_one(data, attr->index);
getnstimeofday(&a);
after = data->energy[attr->index];
mutex_unlock(&data->lock);
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct aem_data *a = dev_get_drvdata(dev);
- a->update(a);
+ mutex_lock(&a->lock);
+ update_aem_energy_one(a, attr->index);
+ mutex_unlock(&a->lock);
return sprintf(buf, "%llu\n",
(unsigned long long)a->energy[attr->index] * 1000);
}
MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
MODULE_LICENSE("GPL");
module_init(aem_init);
{
struct w83791d_data *data;
struct device *dev = &client->dev;
- int i, val1, err;
+ int i, err;
#ifdef DEBUG
+ int val1;
val1 = w83791d_read(client, W83791D_REG_DID_VID4);
dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
*/
static void msf_from_bcd(struct atapi_msf *msf)
{
- msf->minute = BCD2BIN(msf->minute);
- msf->second = BCD2BIN(msf->second);
- msf->frame = BCD2BIN(msf->frame);
+ msf->minute = bcd2bin(msf->minute);
+ msf->second = bcd2bin(msf->second);
+ msf->frame = bcd2bin(msf->frame);
}
int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
return stat;
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
- toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
+ toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+ toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
}
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
return stat;
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
- toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+ toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
} else {
toc->hdr.first_track = CDROM_LEADOUT;
toc->hdr.last_track = CDROM_LEADOUT;
toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
- toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
+ toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+ toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
}
for (i = 0; i <= ntracks; i++) {
if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
- toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+ toc->ent[i].track = bcd2bin(toc->ent[i].track);
msf_from_bcd(&toc->ent[i].addr.msf);
}
toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
.name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
- .remove = aec62xx_remove,
+ .remove = __devexit_p(aec62xx_remove),
};
static int __init aec62xx_ide_init(void)
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
- .remove = cy82c693_remove,
+ .remove = __devexit_p(cy82c693_remove),
};
static int __init cy82c693_ide_init(void)
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
- .remove = hpt366_remove,
+ .remove = __devexit_p(hpt366_remove),
};
static int __init hpt366_ide_init(void)
.name = "ITE821x IDE",
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
- .remove = it821x_remove,
+ .remove = __devexit_p(it821x_remove),
};
static int __init it821x_ide_init(void)
.name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
- .remove = pdc202new_remove,
+ .remove = __devexit_p(pdc202new_remove),
};
static int __init pdc202new_ide_init(void)
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
- .remove = scc_remove,
+ .remove = __devexit_p(scc_remove),
};
static int scc_ide_init(void)
if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
DRV_NAME)) {
printk(KERN_ERR
- "%s : %s -- ERROR, Addresses "
+ "%s %s: -- ERROR, Addresses "
"0x%p to 0x%p ALREADY in use\n",
- __func__, DRV_NAME, (void *) cmd_phys_base,
+ DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
(void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
return -ENOMEM;
}
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
- .remove = siimage_remove,
+ .remove = __devexit_p(siimage_remove),
};
static int __init siimage_ide_init(void)
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
- .remove = sis5513_remove,
+ .remove = __devexit_p(sis5513_remove),
};
static int __init sis5513_ide_init(void)
.name = "TC86C001",
.id_table = tc86c001_pci_tbl,
.probe = tc86c001_init_one,
- .remove = tc86c001_remove,
+ .remove = __devexit_p(tc86c001_remove),
};
static int __init tc86c001_ide_init(void)
.name = "VIA_IDE",
.id_table = via_pci_tbl,
.probe = via_init_one,
- .remove = via_remove,
+ .remove = __devexit_p(via_remove),
};
static int __init via_ide_init(void)
ne->host = host;
ne->nodeid = nodeid;
ne->generation = generation;
- ne->needs_probe = 1;
+ ne->needs_probe = true;
ne->guid = guid;
ne->guid_vendor_id = (guid >> 40) & 0xffffff;
struct csr1212_keyval *kv, *vendor_name_kv = NULL;
u8 last_key_id = 0;
- ne->needs_probe = 0;
+ ne->needs_probe = false;
csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) {
switch (kv->key.id) {
nodemgr_update_bus_options(ne);
/* Mark the node as new, so it gets re-probed */
- ne->needs_probe = 1;
+ ne->needs_probe = true;
} else {
/* old cache is valid, so update its generation */
struct nodemgr_csr_info *ci = ne->csr->private;
struct probe_param {
struct host_info *hi;
int generation;
+ bool probe_now;
};
-static int __nodemgr_node_probe(struct device *dev, void *data)
+static int node_probe(struct device *dev, void *data)
{
- struct probe_param *param = (struct probe_param *)data;
+ struct probe_param *p = data;
struct node_entry *ne;
+ if (p->generation != get_hpsb_generation(p->hi->host))
+ return -EAGAIN;
+
ne = container_of(dev, struct node_entry, node_dev);
- if (!ne->needs_probe)
- nodemgr_probe_ne(param->hi, ne, param->generation);
- if (ne->needs_probe)
- nodemgr_probe_ne(param->hi, ne, param->generation);
+ if (ne->needs_probe == p->probe_now)
+ nodemgr_probe_ne(p->hi, ne, p->generation);
return 0;
}
static void nodemgr_node_probe(struct host_info *hi, int generation)
{
- struct hpsb_host *host = hi->host;
- struct probe_param param;
+ struct probe_param p;
- param.hi = hi;
- param.generation = generation;
- /* Do some processing of the nodes we've probed. This pulls them
+ p.hi = hi;
+ p.generation = generation;
+ /*
+ * Do some processing of the nodes we've probed. This pulls them
* into the sysfs layer if needed, and can result in processing of
* unit-directories, or just updating the node and it's
* unit-directories.
*
* Run updates before probes. Usually, updates are time-critical
- * while probes are time-consuming. (Well, those probes need some
- * improvement...) */
-
- class_for_each_device(&nodemgr_ne_class, NULL, ¶m,
- __nodemgr_node_probe);
-
- /* If we had a bus reset while we were scanning the bus, it is
- * possible that we did not probe all nodes. In that case, we
- * skip the clean up for now, since we could remove nodes that
- * were still on the bus. Another bus scan is pending which will
- * do the clean up eventually.
+ * while probes are time-consuming.
*
+ * Meanwhile, another bus reset may have happened. In this case we
+ * skip everything here and let the next bus scan handle it.
+ * Otherwise we may prematurely remove nodes which are still there.
+ */
+ p.probe_now = false;
+ if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+ return;
+
+ p.probe_now = true;
+ if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+ return;
+ /*
* Now let's tell the bus to rescan our devices. This may seem
* like overhead, but the driver-model core will only scan a
* device for a driver when either the device is added, or when a
* new driver is added. A bus reset is a good reason to rescan
* devices that were there before. For example, an sbp2 device
* may become available for login, if the host that held it was
- * just removed. */
-
- if (generation == get_hpsb_generation(host))
- if (bus_rescan_devices(&ieee1394_bus_type))
- HPSB_DEBUG("bus_rescan_devices had an error");
+ * just removed.
+ */
+ if (bus_rescan_devices(&ieee1394_bus_type) != 0)
+ HPSB_DEBUG("bus_rescan_devices had an error");
}
static int nodemgr_send_resume_packet(struct hpsb_host *host)
struct hpsb_host *host; /* Host this node is attached to */
nodeid_t nodeid; /* NodeID */
struct bus_options busopt; /* Bus Options */
- int needs_probe;
+ bool needs_probe;
unsigned int generation; /* Synced with hpsb generation */
/* The following is read from the config rom */
{
struct sbp2_lu *lu = ud->device.driver_data;
- if (sbp2_reconnect_device(lu)) {
- /* Reconnect has failed. Perhaps we didn't reconnect fast
- * enough. Try a regular login, but first log out just in
- * case of any weirdness. */
+ if (sbp2_reconnect_device(lu) != 0) {
+ /*
+ * Reconnect failed. If another bus reset happened,
+ * let nodemgr proceed and call sbp2_update again later
+ * (or sbp2_remove if this node went away).
+ */
+ if (!hpsb_node_entry_valid(lu->ne))
+ return 0;
+ /*
+ * Or the target rejected the reconnect because we weren't
+ * fast enough. Try a regular login, but first log out
+ * just in case of any weirdness.
+ */
sbp2_logout_device(lu);
- if (sbp2_login_device(lu)) {
- /* Login failed too, just fail, and the backend
- * will call our sbp2_remove for us */
+ if (sbp2_login_device(lu) != 0) {
+ if (!hpsb_node_entry_valid(lu->ne))
+ return 0;
+
+ /* Maybe another initiator won the login. */
SBP2_ERR("Failed to reconnect to sbp2 device!");
return -EBUSY;
}
return copy_to_user(p, str, len) ? -EFAULT : len;
}
+#define OLD_KEY_MAX 0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+ static unsigned long keymax_warn_time;
+ unsigned long *bits;
+ int len;
+
+ switch (_IOC_NR(cmd) & EV_MAX) {
+
+ case 0: bits = dev->evbit; len = EV_MAX; break;
+ case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+ case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+ case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+ case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+ case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+ case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+ case EV_FF: bits = dev->ffbit; len = FF_MAX; break;
+ case EV_SW: bits = dev->swbit; len = SW_MAX; break;
+ default: return -EINVAL;
+ }
+
+ /*
+ * Work around bugs in userspace programs that like to do
+ * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+ * should be in bytes, not in bits.
+ */
+ if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+ len = OLD_KEY_MAX;
+ if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+ printk(KERN_WARNING
+ "evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
+ "limiting output to %zu bytes. See "
+ "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+ OLD_KEY_MAX,
+ BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+ }
+
+ return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
static long evdev_do_ioctl(struct file *file, unsigned int cmd,
void __user *p, int compat_mode)
{
if (_IOC_DIR(cmd) == _IOC_READ) {
- if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
- unsigned long *bits;
- int len;
-
- switch (_IOC_NR(cmd) & EV_MAX) {
-
- case 0: bits = dev->evbit; len = EV_MAX; break;
- case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
- case EV_REL: bits = dev->relbit; len = REL_MAX; break;
- case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
- case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
- case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
- case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
- case EV_FF: bits = dev->ffbit; len = FF_MAX; break;
- case EV_SW: bits = dev->swbit; len = SW_MAX; break;
- default: return -EINVAL;
- }
- return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
- }
+ if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+ return handle_eviocgbit(dev, cmd, p, compat_mode);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/fs.h>
unsigned int type = button->type ?: EV_KEY;
bdata->input = input;
+ bdata->button = button;
setup_timer(&bdata->timer,
gpio_check_button, (unsigned long)bdata);
#define gpio_keys_resume NULL
#endif
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
.probe = gpio_keys_probe,
.remove = __devexit_p(gpio_keys_remove),
.suspend = gpio_keys_suspend,
return 0;
}
+MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_DESCRIPTION("Cobalt button interface driver");
+MODULE_LICENSE("GPL");
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:Cobalt buttons");
To compile this driver as a module, choose M here: the
module will be called appletouch.
+config MOUSE_BCM5974
+ tristate "Apple USB BCM5974 Multitouch trackpad support"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you have an Apple USB BCM5974 Multitouch
+ trackpad.
+
+ The BCM5974 is the multitouch trackpad found in the Macbook
+ Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+ It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+ This driver provides multitouch functionality together with
+ the synaptics X11 driver.
+
+ The interface is currently identical to the appletouch interface,
+ for further information, see
+ <file:Documentation/input/appletouch.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm5974.
+
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
depends on ISA
obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o
obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
--- /dev/null
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE 0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI 0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO 0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS 0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+
+#define BCM5974_DEVICE(prod) { \
+ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL), \
+ .idVendor = USB_VENDOR_ID_APPLE, \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_INTERFACE_CLASS_HID, \
+ .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE \
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table [] = {
+ /* MacbookAir1.1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+ /* MacbookProPenryn */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Terminating entry */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+ { if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+ u8 unknown1; /* constant */
+ u8 button; /* left button */
+ u8 rel_x; /* relative x coordinate */
+ u8 rel_y; /* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+ u8 unknown1[16]; /* constants, timers, etc */
+ u8 fingers; /* number of fingers on trackpad */
+ u8 unknown2[9]; /* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+ __le16 origin; /* left/right origin? */
+ __le16 abs_x; /* absolute x coodinate */
+ __le16 abs_y; /* absolute y coodinate */
+ __le16 rel_x; /* relative x coodinate */
+ __le16 rel_y; /* relative y coodinate */
+ __le16 size_major; /* finger size, major axis? */
+ __le16 size_minor; /* finger size, minor axis? */
+ __le16 orientation; /* 16384 when point, else 15 bit angle */
+ __le16 force_major; /* trackpad force, major axis? */
+ __le16 force_minor; /* trackpad force, minor axis? */
+ __le16 unused[3]; /* zeros */
+ __le16 multi; /* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+ struct tp_header header;
+ struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+ int dim; /* logical dimension */
+ int fuzz; /* logical noise value */
+ int devmin; /* device minimum reading */
+ int devmax; /* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+ int ansi, iso, jis; /* the product id of this device */
+ int bt_ep; /* the endpoint of the button interface */
+ int bt_datalen; /* data length of the button interface */
+ int tp_ep; /* the endpoint of the trackpad interface */
+ int tp_datalen; /* data length of the trackpad interface */
+ struct bcm5974_param p; /* finger pressure limits */
+ struct bcm5974_param w; /* finger width limits */
+ struct bcm5974_param x; /* horizontal limits */
+ struct bcm5974_param y; /* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+ char phys[64];
+ struct usb_device *udev; /* usb device */
+ struct usb_interface *intf; /* our interface */
+ struct input_dev *input; /* input dev */
+ struct bcm5974_config cfg; /* device configuration */
+ struct mutex pm_mutex; /* serialize access to open/suspend */
+ int opened; /* 1: opened, 0: closed */
+ struct urb *bt_urb; /* button usb request block */
+ struct bt_data *bt_data; /* button transferred data */
+ struct urb *tp_urb; /* trackpad usb request block */
+ struct tp_data *tp_data; /* trackpad transferred data */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE 256 /* maximum finger pressure */
+#define DIM_WIDTH 16 /* maximum finger width */
+#define DIM_X 1280 /* maximum trackpad x value */
+#define DIM_Y 800 /* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE 45 /* pressure signal-to-noise ratio */
+#define SN_WIDTH 100 /* width signal-to-noise ratio */
+#define SN_COORD 250 /* coordinate signal-to-noise ratio */
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0x84, sizeof(struct bt_data),
+ 0x81, sizeof(struct tp_data),
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+ { DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0x84, sizeof(struct bt_data),
+ 0x81, sizeof(struct tp_data),
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+ { DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+ },
+ {}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+ u16 id = le16_to_cpu(udev->descriptor.idProduct);
+ const struct bcm5974_config *cfg;
+
+ for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+ if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+ return cfg;
+
+ return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+ return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+ return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+ int s = int2scale(p, x);
+
+ return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+ const struct bcm5974_config *cfg)
+{
+ __set_bit(EV_ABS, input_dev->evbit);
+
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ 0, cfg->p.dim, cfg->p.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+ 0, cfg->w.dim, cfg->w.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_X,
+ 0, cfg->x.dim, cfg->x.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ 0, cfg->y.dim, cfg->y.fuzz, 0);
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+ if (size != sizeof(struct bt_data))
+ return -EIO;
+
+ input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+ input_sync(dev->input);
+
+ return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+ const struct bcm5974_config *c = &dev->cfg;
+ const struct tp_finger *f = dev->tp_data->finger;
+ struct input_dev *input = dev->input;
+ const int fingers = (size - 26) / 28;
+ int p = 0, w, x, y, n = 0;
+
+ if (size < 26 || (size - 26) % 28 != 0)
+ return -EIO;
+
+ if (fingers) {
+ p = raw2int(f->force_major);
+ w = raw2int(f->size_major);
+ x = raw2int(f->abs_x);
+ y = raw2int(f->abs_y);
+ n = p > 0 ? fingers : 0;
+
+ dprintk(9,
+ "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ p, w, x, y, n);
+
+ input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
+ input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
+ input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+ }
+
+ input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+
+ input_report_key(input, BTN_TOOL_FINGER, n == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+
+ input_sync(input);
+
+ return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID 1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID 9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+ char *data = kmalloc(8, GFP_KERNEL);
+ int retval = 0, size;
+
+ if (!data) {
+ err("bcm5974: out of memory");
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ /* read configuration */
+ size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+ BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+ if (size != 8) {
+ err("bcm5974: could not read from device");
+ retval = -EIO;
+ goto out;
+ }
+
+ /* apply the mode switch */
+ data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+ /* write configuration */
+ size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+ BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+ if (size != 8) {
+ err("bcm5974: could not write to device");
+ retval = -EIO;
+ goto out;
+ }
+
+ dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+ kfree(data);
+ return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+ struct bcm5974 *dev = urb->context;
+ int error;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EOVERFLOW:
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dbg("bcm5974: button urb shutting down: %d", urb->status);
+ return;
+ default:
+ dbg("bcm5974: button urb status: %d", urb->status);
+ goto exit;
+ }
+
+ if (report_bt_state(dev, dev->bt_urb->actual_length))
+ dprintk(1, "bcm5974: bad button package, length: %d\n",
+ dev->bt_urb->actual_length);
+
+exit:
+ error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+ if (error)
+ err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+ struct bcm5974 *dev = urb->context;
+ int error;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EOVERFLOW:
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+ return;
+ default:
+ dbg("bcm5974: trackpad urb status: %d", urb->status);
+ goto exit;
+ }
+
+ /* control response ignored */
+ if (dev->tp_urb->actual_length == 2)
+ goto exit;
+
+ if (report_tp_state(dev, dev->tp_urb->actual_length))
+ dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+ dev->tp_urb->actual_length);
+
+exit:
+ error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+ if (error)
+ err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device. It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+ if (bcm5974_wellspring_mode(dev)) {
+ dprintk(1, "bcm5974: mode switch failed\n");
+ goto error;
+ }
+
+ if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+ goto error;
+
+ if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+ goto err_kill_bt;
+
+ return 0;
+
+err_kill_bt:
+ usb_kill_urb(dev->bt_urb);
+error:
+ return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+ usb_kill_urb(dev->tp_urb);
+ usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+ struct bcm5974 *dev = input_get_drvdata(input);
+ int error;
+
+ error = usb_autopm_get_interface(dev->intf);
+ if (error)
+ return error;
+
+ mutex_lock(&dev->pm_mutex);
+
+ error = bcm5974_start_traffic(dev);
+ if (!error)
+ dev->opened = 1;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ if (error)
+ usb_autopm_put_interface(dev->intf);
+
+ return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+ struct bcm5974 *dev = input_get_drvdata(input);
+
+ mutex_lock(&dev->pm_mutex);
+
+ bcm5974_pause_traffic(dev);
+ dev->opened = 0;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+
+ mutex_lock(&dev->pm_mutex);
+
+ if (dev->opened)
+ bcm5974_pause_traffic(dev);
+
+ mutex_unlock(&dev->pm_mutex);
+
+ return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+ int error = 0;
+
+ mutex_lock(&dev->pm_mutex);
+
+ if (dev->opened)
+ error = bcm5974_start_traffic(dev);
+
+ mutex_unlock(&dev->pm_mutex);
+
+ return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(iface);
+ const struct bcm5974_config *cfg;
+ struct bcm5974 *dev;
+ struct input_dev *input_dev;
+ int error = -ENOMEM;
+
+ /* find the product index */
+ cfg = bcm5974_get_config(udev);
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("bcm5974: out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->intf = iface;
+ dev->input = input_dev;
+ dev->cfg = *cfg;
+ mutex_init(&dev->pm_mutex);
+
+ /* setup urbs */
+ dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->bt_urb)
+ goto err_free_devs;
+
+ dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->tp_urb)
+ goto err_free_bt_urb;
+
+ dev->bt_data = usb_buffer_alloc(dev->udev,
+ dev->cfg.bt_datalen, GFP_KERNEL,
+ &dev->bt_urb->transfer_dma);
+ if (!dev->bt_data)
+ goto err_free_urb;
+
+ dev->tp_data = usb_buffer_alloc(dev->udev,
+ dev->cfg.tp_datalen, GFP_KERNEL,
+ &dev->tp_urb->transfer_dma);
+ if (!dev->tp_data)
+ goto err_free_bt_buffer;
+
+ usb_fill_int_urb(dev->bt_urb, udev,
+ usb_rcvintpipe(udev, cfg->bt_ep),
+ dev->bt_data, dev->cfg.bt_datalen,
+ bcm5974_irq_button, dev, 1);
+
+ usb_fill_int_urb(dev->tp_urb, udev,
+ usb_rcvintpipe(udev, cfg->tp_ep),
+ dev->tp_data, dev->cfg.tp_datalen,
+ bcm5974_irq_trackpad, dev, 1);
+
+ /* create bcm5974 device */
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input_dev->name = "bcm5974";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->dev.parent = &iface->dev;
+
+ input_set_drvdata(input_dev, dev);
+
+ input_dev->open = bcm5974_open;
+ input_dev->close = bcm5974_close;
+
+ setup_events_to_report(input_dev, cfg);
+
+ error = input_register_device(dev->input);
+ if (error)
+ goto err_free_buffer;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
+
+ return 0;
+
+err_free_buffer:
+ usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+ dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+ usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+ dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+ usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+ usb_free_urb(dev->bt_urb);
+err_free_devs:
+ usb_set_intfdata(iface, NULL);
+ input_free_device(input_dev);
+ kfree(dev);
+ return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+
+ usb_set_intfdata(iface, NULL);
+
+ input_unregister_device(dev->input);
+ usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+ dev->tp_data, dev->tp_urb->transfer_dma);
+ usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+ dev->bt_data, dev->bt_urb->transfer_dma);
+ usb_free_urb(dev->tp_urb);
+ usb_free_urb(dev->bt_urb);
+ kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+ .name = "bcm5974",
+ .probe = bcm5974_probe,
+ .disconnect = bcm5974_disconnect,
+ .suspend = bcm5974_suspend,
+ .resume = bcm5974_resume,
+ .reset_resume = bcm5974_resume,
+ .id_table = bcm5974_table,
+ .supports_autosuspend = 1,
+};
+
+static int __init bcm5974_init(void)
+{
+ return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+ usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
*/
#include <linux/init.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
},
},
+ {
+ .ident = "Acer TravelMate 4280",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+ },
+ },
{ }
};
* we have the PS2 in a good state */
out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
- dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
- drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+ dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+ drvdata->phys_addr, drvdata->base_address, drvdata->irq);
serio = &drvdata->serio;
serio->id.type = SERIO_8042;
#include <asm/byteorder.h>
-#include <linux/version.h>
#include <linux/usb/input.h>
/* Version with a Major number of 2 is for kernel inclusion only. */
config TOUCHSCREEN_WM9705
bool "WM9705 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9705
- touchscreen controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9705 touchscreen controller.
config TOUCHSCREEN_WM9712
bool "WM9712 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9712
- touchscreen controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9712 touchscreen controller.
config TOUCHSCREEN_WM9713
bool "WM9713 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
- controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9713 touchscreen controller.
config TOUCHSCREEN_WM97XX_MAINSTONE
tristate "WM97xx Mainstone accelerated touch"
input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
- input->name = client->driver_name;
+ input->name = client->name;
input->id.bustype = BUS_I2C;
input->dev.parent = &client->dev;
goto err1;
error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
- client->driver_name, priv);
+ client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err2;
return 0;
}
+static const struct i2c_device_id migor_ts_id[] = {
+ { "migor_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
static struct i2c_driver migor_ts_driver = {
.driver = {
.name = "migor_ts",
},
.probe = migor_ts_probe,
.remove = migor_ts_remove,
+ .id_table = migor_ts_id,
};
static int __init migor_ts_init(void)
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
}
+static void md_safemode_timeout(unsigned long data);
+
static ssize_t
safe_delay_show(mddev_t *mddev, char *page)
{
if (msec == 0)
mddev->safemode_delay = 0;
else {
+ unsigned long old_delay = mddev->safemode_delay;
mddev->safemode_delay = (msec*HZ)/1000;
if (mddev->safemode_delay == 0)
mddev->safemode_delay = 1;
+ if (mddev->safemode_delay < old_delay)
+ md_safemode_timeout((unsigned long)mddev);
}
return len;
}
*/
if (mddev->sync_thread)
return -EBUSY;
+ if (mddev->bitmap)
+ /* Sorry, cannot grow a bitmap yet, just remove it,
+ * grow, and re-add.
+ */
+ return -EBUSY;
rdev_for_each(rdev, tmp, mddev) {
sector_t avail;
avail = rdev->size * 2;
}
}
- if (mddev->degraded) {
+ if (mddev->degraded && ! mddev->ro) {
rdev_for_each(rdev, rtmp, mddev) {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
flush_signals(current);
}
+ if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+ return;
if ( ! (
(mddev->flags && !mddev->external) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
if (mddev_trylock(mddev)) {
int spares = 0;
+ if (mddev->ro) {
+ /* Only thing we do on a ro array is remove
+ * failed devices.
+ */
+ remove_and_add_spares(mddev);
+ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ goto unlock;
+ }
+
if (!mddev->external) {
int did_change = 0;
spin_lock_irq(&mddev->write_lock);
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+ !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
/* activate any spares */
if (mddev->pers->spare_active(mddev))
} else if ((spares = remove_and_add_spares(mddev))) {
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (mddev->recovery_cp < MaxSector) {
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
for_each_mddev(mddev, tmp)
if (mddev_trylock(mddev)) {
- do_md_stop (mddev, 1, 0);
+ /* Force a switch to readonly even array
+ * appears to still be in use. Hence
+ * the '100'.
+ */
+ do_md_stop (mddev, 1, 100);
mddev_unlock(mddev);
}
/*
kfree(r10_bio);
}
+/* Maximum size of each resync request */
#define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
/*
* When performing a resync, we need to read and compare, so
* there is no normal IO happeing. It must arrange to call
* lower_barrier when the particular background IO completes.
*/
-#define RESYNC_DEPTH 32
static void raise_barrier(conf_t *conf, int force)
{
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
- break;
}
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- goto unlock;
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
}
if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
- break;
}
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- goto unlock;
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
}
+
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
return -EINVAL; /* Cannot shrink array or change level yet */
if (mddev->delta_disks == 0)
return 0; /* nothing to do */
+ if (mddev->bitmap)
+ /* Cannot grow a bitmap yet */
+ return -EBUSY;
/* Can only proceed if there are plenty of stripe_heads.
* We need a minimum of one full stripe,, and for sensible progress
static acpi_status set_u32(u32 value, u32 cap)
{
+ acpi_status status;
+
if (interface->capability & cap) {
switch (interface->type) {
case ACER_AMW0:
return AMW0_set_u32(value, cap, interface);
case ACER_AMW0_V2:
+ if (cap == ACER_CAP_MAILLED)
+ return AMW0_set_u32(value, cap, interface);
+
+ /*
+ * On some models, some WMID methods don't toggle
+ * properly. For those cases, we want to run the AMW0
+ * method afterwards to be certain we've really toggled
+ * the device state.
+ */
+ if (cap == ACER_CAP_WIRELESS ||
+ cap == ACER_CAP_BLUETOOTH) {
+ status = WMID_set_u32(value, cap, interface);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ return AMW0_set_u32(value, cap, interface);
+ }
case ACER_WMID:
return WMID_set_u32(value, cap, interface);
default:
hwmon = eeepc_hwmon_device;
if (!hwmon)
return ;
- hwmon_device_unregister(hwmon);
sysfs_remove_group(&hwmon->kobj,
&hwmon_attribute_group);
+ hwmon_device_unregister(hwmon);
eeepc_hwmon_device = NULL;
}
return IRQ_HANDLED;
}
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
- int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+ void *buf_id, int size,
+ enum s3c2410_dma_buffresult result)
{
struct s3cmci_host *host = buf_id;
unsigned long iflags;
mmc_request_done(host->mmc, mrq);
}
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+ enum s3c2410_dmasrc source)
{
static enum s3c2410_dmasrc last_source = -1;
static int setup_ok;
enable_irq(host->irq);
}
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
{
+ struct s3cmci_host *host = mmc_priv(mmc);
struct s3c24xx_mci_pdata *pdata = host->pdata;
int ret;
host->cmd_is_stop = 0;
host->mrq = mrq;
- if (s3cmci_card_present(host) == 0) {
+ if (s3cmci_card_present(mmc) == 0) {
dbg(host, dbg_err, "%s: no medium present\n", __func__);
host->mrq->cmd->error = -ENOMEDIUM;
mmc_request_done(mmc, mrq);
.request = s3cmci_request,
.set_ios = s3cmci_set_ios,
.get_ro = s3cmci_get_ro,
+ .get_cd = s3cmci_card_present,
};
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
}
host->base = ioremap(host->mem->start, RESSIZE(host->mem));
- if (host->base == 0) {
+ if (!host->base) {
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
ret = -EINVAL;
goto probe_free_mem_region;
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/scatterlist.h>
-#include <linux/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
---help---
Debugging support.
+config LIBERTAS_THINFIRM
+ tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+ depends on WLAN_80211 && MAC80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices using thinfirm.
+
+config LIBERTAS_THINFIRM_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+ depends on LIBERTAS_THINFIRM && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices using thinfirm.
+
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
select WIRELESS_EXT
+ select FW_LOADER
+ select CRYPTO
+ select CRYPTO_MICHAEL_MIC
---help---
A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
depends on PCMCIA && HERMES
- select FW_LOADER
---help---
This is a driver for 802.11b cards using RAM-loadable Symbol
obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o
-obj-$(CONFIG_HERMES) += orinoco.o hermes.o
+obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o
obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
obj-$(CONFIG_APPLE_AIRPORT) += airport.o
obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS) += libertas/
+obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
+
rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
struct airo_info *ai = dev->priv;
if (!skb) {
- airo_print_err(dev->name, "%s: skb == NULL!",__FUNCTION__);
+ airo_print_err(dev->name, "%s: skb == NULL!",__func__);
return 0;
}
npacks = skb_queue_len (&ai->txq);
if ((skb = skb_dequeue(&ai->txq)) == NULL) {
airo_print_err(dev->name,
"%s: Dequeue'd zero in send_packet()",
- __FUNCTION__);
+ __func__);
return 0;
}
u32 *fids = priv->fids;
if ( skb == NULL ) {
- airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__);
+ airo_print_err(dev->name, "%s: skb == NULL!", __func__);
return 0;
}
}
if ( skb == NULL ) {
- airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__);
+ airo_print_err(dev->name, "%s: skb == NULL!", __func__);
return 0;
}
if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid))
airo_print_err(ai->dev->name,
"%s: MAC should be disabled (rid=%04x)",
- __FUNCTION__, rid);
+ __func__, rid);
memset(&cmd, 0, sizeof(cmd));
memset(&rsp, 0, sizeof(rsp));
&ai->config_desc.rid_desc, sizeof(Rid));
if (len < 4 || len > 2047) {
- airo_print_err(ai->dev->name, "%s: len=%d", __FUNCTION__, len);
+ airo_print_err(ai->dev->name, "%s: len=%d", __func__, len);
rc = -1;
} else {
memcpy((char *)ai->config_desc.virtual_host_addr,
rc = issuecommand(ai, &cmd, &rsp);
if ((rc & 0xff00) != 0) {
airo_print_err(ai->dev->name, "%s: Write rid Error %d",
- __FUNCTION__, rc);
+ __func__, rc);
airo_print_err(ai->dev->name, "%s: Cmd=%04x",
- __FUNCTION__, cmd.cmd);
+ __func__, cmd.cmd);
}
if ((rsp.status & 0x7f00))
}
/* Allocate space for private device-specific data */
- dev = alloc_orinocodev(sizeof(*card), airport_hard_reset);
+ dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
+ airport_hard_reset, NULL);
if (! dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
return -ENODEV;
/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
#define AR5K_SET_SHORT_PREAMBLE 0x04
-#define HAS_SHPREAMBLE(_ix) \
- (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
-#define SHPREAMBLE_FLAG(_ix) \
- (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
-
/****************\
TX DEFINITIONS
u16 a2_athchan;
};
+
/*
* Rate definitions
- * TODO: Clean them up or move them on mac80211 -most of these infos are
- * used by the rate control algorytm on MadWiFi.
*/
-/* Max number of rates on the rate table and what it seems
- * Atheros hardware supports */
-#define AR5K_MAX_RATES 32
-
/**
- * struct ath5k_rate - rate structure
- * @valid: is this a valid rate for rate control (remove)
- * @modulation: respective mac80211 modulation
- * @rate_kbps: rate in kbit/s
- * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
- * &struct ath5k_rx_status.rs_rate and on TX on
- * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
- * up to 32 rates, indexed by 1-32. This means we really only need
- * 6 bits for the rate_code.
- * @dot11_rate: respective IEEE-802.11 rate value
- * @control_rate: index of rate assumed to be used to send control frames.
- * This can be used to set override the value on the rate duration
- * registers. This is only useful if we can override in the harware at
- * what rate we want to send control frames at. Note that IEEE-802.11
- * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
- * should send ACK/CTS, if we change this value we can be breaking
- * the spec.
+ * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
*
- * This structure is used to get the RX rate or set the TX rate on the
+ * The rate code is used to get the RX rate or set the TX rate on the
* hardware descriptors. It is also used for internal modulation control
* and settings.
*
- * On RX after the &struct ath5k_desc is parsed by the appropriate
- * ah_proc_rx_desc() the respective hardware rate value is set in
- * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
- * &struct ath5k_tx_status.ts_rate which is later used to setup the
- * &struct ath5k_desc correctly. This is the hardware rate map we are
- * aware of:
+ * This is the hardware rate map we are aware of:
*
- * rate_code 1 2 3 4 5 6 7 8
+ * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
* rate_kbps 3000 1000 ? ? ? 2000 500 48000
*
- * rate_code 9 10 11 12 13 14 15 16
+ * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
* rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
*
* rate_code 17 18 19 20 21 22 23 24
* rate_kbps ? ? ? ? ? ? ? 11000
*
* rate_code 25 26 27 28 29 30 31 32
- * rate_kbps 5500 2000 1000 ? ? ? ? ?
+ * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
*
+ * "S" indicates CCK rates with short preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
*/
-struct ath5k_rate {
- u8 valid;
- u32 modulation;
- u16 rate_kbps;
- u8 rate_code;
- u8 dot11_rate;
- u8 control_rate;
-};
-
-/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
-struct ath5k_rate_table {
- u16 rate_count;
- u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */
- struct ath5k_rate rates[AR5K_MAX_RATES];
-};
-
-/*
- * Rate tables...
- * TODO: CLEAN THIS !!!
- */
-#define AR5K_RATES_11A { 8, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
- 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, 0, 6000, 11, 140, 0 }, \
- { 1, 0, 9000, 15, 18, 0 }, \
- { 1, 0, 12000, 10, 152, 2 }, \
- { 1, 0, 18000, 14, 36, 2 }, \
- { 1, 0, 24000, 9, 176, 4 }, \
- { 1, 0, 36000, 13, 72, 4 }, \
- { 1, 0, 48000, 8, 96, 4 }, \
- { 1, 0, 54000, 12, 108, 4 } } \
-}
-
-#define AR5K_RATES_11B { 4, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
- 3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, 0, 1000, 27, 130, 0 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \
-}
-
-#define AR5K_RATES_11G { 12, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \
- 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
- 3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, 0, 1000, 27, 2, 0 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
- { 0, 0, 6000, 11, 12, 4 }, \
- { 0, 0, 9000, 15, 18, 4 }, \
- { 1, 0, 12000, 10, 24, 6 }, \
- { 1, 0, 18000, 14, 36, 6 }, \
- { 1, 0, 24000, 9, 48, 8 }, \
- { 1, 0, 36000, 13, 72, 8 }, \
- { 1, 0, 48000, 8, 96, 8 }, \
- { 1, 0, 54000, 12, 108, 8 } } \
-}
+#define AR5K_MAX_RATES 32
-#define AR5K_RATES_TURBO { 8, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
- 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \
- { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \
- { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \
- { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \
- { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \
- { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \
- { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \
- { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \
-}
+/* B */
+#define ATH5K_RATE_CODE_1M 0x1B
+#define ATH5K_RATE_CODE_2M 0x1A
+#define ATH5K_RATE_CODE_5_5M 0x19
+#define ATH5K_RATE_CODE_11M 0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M 0x0B
+#define ATH5K_RATE_CODE_9M 0x0F
+#define ATH5K_RATE_CODE_12M 0x0A
+#define ATH5K_RATE_CODE_18M 0x0E
+#define ATH5K_RATE_CODE_24M 0x09
+#define ATH5K_RATE_CODE_36M 0x0D
+#define ATH5K_RATE_CODE_48M 0x08
+#define ATH5K_RATE_CODE_54M 0x0C
+/* XR */
+#define ATH5K_RATE_CODE_XR_500K 0x07
+#define ATH5K_RATE_CODE_XR_1M 0x02
+#define ATH5K_RATE_CODE_XR_2M 0x06
+#define ATH5K_RATE_CODE_XR_3M 0x01
-#define AR5K_RATES_XR { 12, { \
- 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \
- 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, MODULATION_XR, 500, 7, 129, 0 }, \
- { 1, MODULATION_XR, 1000, 2, 139, 1 }, \
- { 1, MODULATION_XR, 2000, 6, 150, 2 }, \
- { 1, MODULATION_XR, 3000, 1, 150, 3 }, \
- { 1, 0, 6000, 11, 140, 4 }, \
- { 1, 0, 9000, 15, 18, 4 }, \
- { 1, 0, 12000, 10, 152, 6 }, \
- { 1, 0, 18000, 14, 36, 6 }, \
- { 1, 0, 24000, 9, 176, 8 }, \
- { 1, 0, 36000, 13, 72, 8 }, \
- { 1, 0, 48000, 8, 96, 8 }, \
- { 1, 0, 54000, 12, 108, 8 } } \
-}
/*
* Crypto definitions
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
+static struct ieee80211_rate ath5k_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ATH5K_RATE_CODE_1M, },
+ { .bitrate = 20,
+ .hw_value = ATH5K_RATE_CODE_2M,
+ .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ATH5K_RATE_CODE_5_5M,
+ .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ATH5K_RATE_CODE_11M,
+ .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ATH5K_RATE_CODE_6M,
+ .flags = 0 },
+ { .bitrate = 90,
+ .hw_value = ATH5K_RATE_CODE_9M,
+ .flags = 0 },
+ { .bitrate = 120,
+ .hw_value = ATH5K_RATE_CODE_12M,
+ .flags = 0 },
+ { .bitrate = 180,
+ .hw_value = ATH5K_RATE_CODE_18M,
+ .flags = 0 },
+ { .bitrate = 240,
+ .hw_value = ATH5K_RATE_CODE_24M,
+ .flags = 0 },
+ { .bitrate = 360,
+ .hw_value = ATH5K_RATE_CODE_36M,
+ .flags = 0 },
+ { .bitrate = 480,
+ .hw_value = ATH5K_RATE_CODE_48M,
+ .flags = 0 },
+ { .bitrate = 540,
+ .hw_value = ATH5K_RATE_CODE_54M,
+ .flags = 0 },
+ /* XR missing */
+};
+
/*
* Prototypes - PCI stack related functions
*/
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
static int ath5k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_hw *hw);
/* Channel/mode setup */
static inline short ath5k_ieee2mhz(short chan);
-static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates,
- const struct ath5k_rate_table *rt,
- unsigned int max);
static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
struct ieee80211_channel *channels,
unsigned int mode,
unsigned int max);
-static int ath5k_getchannels(struct ieee80211_hw *hw);
+static int ath5k_setup_bands(struct ieee80211_hw *hw);
static int ath5k_chan_set(struct ath5k_softc *sc,
struct ieee80211_channel *chan);
static void ath5k_setcurmode(struct ath5k_softc *sc,
unsigned int mode);
static void ath5k_mode_setup(struct ath5k_softc *sc);
-static void ath5k_set_total_hw_rates(struct ath5k_softc *sc);
/* Descriptor setup */
static int ath5k_desc_alloc(struct ath5k_softc *sc,
#endif /* CONFIG_PM */
-
/***********************\
* Driver Initialization *
\***********************/
* on settings like the phy mode and regulatory
* domain restrictions.
*/
- ret = ath5k_getchannels(hw);
+ ret = ath5k_setup_bands(hw);
if (ret) {
ATH5K_ERR(sc, "can't get channels\n");
goto err;
}
- /* Set *_rates so we can map hw rate index */
- ath5k_set_total_hw_rates(sc);
-
/* NB: setup here so ath5k_rate_update is happy */
if (test_bit(AR5K_MODE_11A, ah->ah_modes))
ath5k_setcurmode(sc, AR5K_MODE_11A);
return 2212 + chan * 20;
}
-static unsigned int
-ath5k_copy_rates(struct ieee80211_rate *rates,
- const struct ath5k_rate_table *rt,
- unsigned int max)
-{
- unsigned int i, count;
-
- if (rt == NULL)
- return 0;
-
- for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) {
- rates[count].bitrate = rt->rates[i].rate_kbps / 100;
- rates[count].hw_value = rt->rates[i].rate_code;
- rates[count].flags = rt->rates[i].modulation;
- count++;
- max--;
- }
-
- return count;
-}
-
static unsigned int
ath5k_copy_channels(struct ath5k_hw *ah,
struct ieee80211_channel *channels,
return count;
}
+static void
+ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
+{
+ u8 i;
+
+ for (i = 0; i < AR5K_MAX_RATES; i++)
+ sc->rate_idx[b->band][i] = -1;
+
+ for (i = 0; i < b->n_bitrates; i++) {
+ sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+ if (b->bitrates[i].hw_value_short)
+ sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+ }
+}
+
static int
-ath5k_getchannels(struct ieee80211_hw *hw)
+ath5k_setup_bands(struct ieee80211_hw *hw)
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
- struct ieee80211_supported_band *sbands = sc->sbands;
- const struct ath5k_rate_table *hw_rates;
- unsigned int max_r, max_c, count_r, count_c;
- int mode2g = AR5K_MODE_11G;
+ struct ieee80211_supported_band *sband;
+ int max_c, count_c = 0;
+ int i;
BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
-
- max_r = ARRAY_SIZE(sc->rates);
max_c = ARRAY_SIZE(sc->channels);
- count_r = count_c = 0;
/* 2GHz band */
- if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
- mode2g = AR5K_MODE_11B;
- if (!test_bit(AR5K_MODE_11B,
- sc->ah->ah_capabilities.cap_mode))
- mode2g = -1;
- }
+ sband = &sc->sbands[IEEE80211_BAND_2GHZ];
+ sband->band = IEEE80211_BAND_2GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
- if (mode2g > 0) {
- struct ieee80211_supported_band *sband =
- &sbands[IEEE80211_BAND_2GHZ];
+ if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
+ /* G mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 12);
+ sband->n_bitrates = 12;
- sband->bitrates = sc->rates;
sband->channels = sc->channels;
-
- sband->band = IEEE80211_BAND_2GHZ;
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
- mode2g, max_c);
-
- hw_rates = ath5k_hw_get_rate_table(ah, mode2g);
- sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
- hw_rates, max_r);
+ AR5K_MODE_11G, max_c);
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
count_c = sband->n_channels;
- count_r = sband->n_bitrates;
+ max_c -= count_c;
+ } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
+ /* B mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 4);
+ sband->n_bitrates = 4;
+
+ /* 5211 only supports B rates and uses 4bit rate codes
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+ * fix them up here:
+ */
+ if (ah->ah_version == AR5K_AR5211) {
+ for (i = 0; i < 4; i++) {
+ sband->bitrates[i].hw_value =
+ sband->bitrates[i].hw_value & 0xF;
+ sband->bitrates[i].hw_value_short =
+ sband->bitrates[i].hw_value_short & 0xF;
+ }
+ }
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ sband->channels = sc->channels;
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+ AR5K_MODE_11B, max_c);
- max_r -= count_r;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
max_c -= count_c;
-
}
+ ath5k_setup_rate_idx(sc, sband);
- /* 5GHz band */
-
+ /* 5GHz band, A mode */
if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
- struct ieee80211_supported_band *sband =
- &sbands[IEEE80211_BAND_5GHZ];
+ sband = &sc->sbands[IEEE80211_BAND_5GHZ];
+ sband->band = IEEE80211_BAND_5GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
- sband->bitrates = &sc->rates[count_r];
- sband->channels = &sc->channels[count_c];
+ memcpy(sband->bitrates, &ath5k_rates[4],
+ sizeof(struct ieee80211_rate) * 8);
+ sband->n_bitrates = 8;
- sband->band = IEEE80211_BAND_5GHZ;
+ sband->channels = &sc->channels[count_c];
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
AR5K_MODE_11A, max_c);
- hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A);
- sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
- hw_rates, max_r);
-
hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
}
+ ath5k_setup_rate_idx(sc, sband);
ath5k_debug_dump_bands(sc);
static int
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
- struct ath5k_hw *ah = sc->ah;
- int ret;
-
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
sc->curchan->center_freq, chan->center_freq);
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- ath5k_hw_set_intr(ah, 0); /* disable interrupts */
- ath5k_txq_cleanup(sc); /* clear pending tx frames */
- ath5k_rx_stop(sc); /* turn off frame recv */
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to reset channel "
- "(%u Mhz)\n", __func__, chan->center_freq);
- return ret;
- }
-
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Re-enable rx framework.
- */
- ret = ath5k_rx_start(sc);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
- __func__);
- return ret;
- }
-
- /*
- * Change channels and update the h/w rate map
- * if we're switching; e.g. 11a to 11b/g.
- *
- * XXX needed?
- */
-/* ath5k_chan_change(sc, chan); */
-
- ath5k_beacon_config(sc);
- /*
- * Re-enable interrupts.
- */
- ath5k_hw_set_intr(ah, sc->imask);
+ return ath5k_reset(sc, true, true);
}
return 0;
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
}
-/*
- * Match the hw provided rate index (through descriptors)
- * to an index for sc->curband->bitrates, so it can be used
- * by the stack.
- *
- * This one is a little bit tricky but i think i'm right
- * about this...
- *
- * We have 4 rate tables in the following order:
- * XR (4 rates)
- * 802.11a (8 rates)
- * 802.11b (4 rates)
- * 802.11g (12 rates)
- * that make the hw rate table.
- *
- * Lets take a 5211 for example that supports a and b modes only.
- * First comes the 802.11a table and then 802.11b (total 12 rates).
- * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit),
- * if it returns 2 it points to the second 802.11a rate etc.
- *
- * Same goes for 5212 who has xr/a/b/g support (total 28 rates).
- * First comes the XR table, then 802.11a, 802.11b and 802.11g.
- * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc
- */
-static void
-ath5k_set_total_hw_rates(struct ath5k_softc *sc) {
-
- struct ath5k_hw *ah = sc->ah;
-
- if (test_bit(AR5K_MODE_11A, ah->ah_modes))
- sc->a_rates = 8;
-
- if (test_bit(AR5K_MODE_11B, ah->ah_modes))
- sc->b_rates = 4;
-
- if (test_bit(AR5K_MODE_11G, ah->ah_modes))
- sc->g_rates = 12;
-
- /* XXX: Need to see what what happens when
- xr disable bits in eeprom are set */
- if (ah->ah_version >= AR5K_AR5212)
- sc->xr_rates = 4;
-
-}
-
static inline int
-ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) {
-
- int mac80211_rix;
-
- if(sc->curband->band == IEEE80211_BAND_2GHZ) {
- /* We setup a g ratetable for both b/g modes */
- mac80211_rix =
- hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates;
- } else {
- mac80211_rix = hw_rix - sc->xr_rates;
- }
-
- /* Something went wrong, fallback to basic rate for this band */
- if ((mac80211_rix >= sc->curband->n_bitrates) ||
- (mac80211_rix <= 0 ))
- mac80211_rix = 1;
-
- return mac80211_rix;
+ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
+{
+ WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
+ return sc->rate_idx[sc->curband->band][hw_rix];
}
-
-
-
/***************\
* Buffers setup *
\***************/
ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
if (ret)
return ret;
- if (sc->opmode == IEEE80211_IF_TYPE_AP) {
+ if (sc->opmode == IEEE80211_IF_TYPE_AP ||
+ sc->opmode == IEEE80211_IF_TYPE_MESH_POINT) {
/*
* Always burst out beacon and CAB traffic
* (aifs = cwmin = cwmax = 0)
struct sk_buff *skb, struct ath5k_rx_status *rs)
{
struct ieee80211_hdr *hdr = (void *)skb->data;
- unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb);
+ unsigned int keyix, hlen;
if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
rs->rs_keyix != AR5K_RXKEYIX_INVALID)
/* Apparently when a default key is used to decrypt the packet
the hw does not set the index used to decrypt. In such cases
get the index from the packet. */
+ hlen = ieee80211_hdrlen(hdr->frame_control);
if (ieee80211_has_protected(hdr->frame_control) &&
!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
skb->len >= hlen + 4) {
rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
+ if (rxs.rate_idx >= 0 && rs.rs_rate ==
+ sc->curband->bitrates[rxs.rate_idx].hw_value_short)
+ rxs.flag |= RX_FLAG_SHORTPRE;
+
ath5k_debug_dump_skb(sc, skb, "RX ", 0);
/* check beacons in IBSS mode */
*/
sc->curchan = sc->hw->conf.channel;
sc->curband = &sc->sbands[sc->curchan->band];
- ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
- if (ret) {
- ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
- goto done;
- }
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Setup the hardware after reset: the key cache
- * is filled as needed and the receive engine is
- * set going. Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- ret = ath5k_rx_start(sc);
- if (ret)
- goto done;
-
- /*
- * Enable interrupts.
- */
sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL |
AR5K_INT_MIB;
+ ret = ath5k_reset(sc, false, false);
+ if (ret)
+ goto done;
- ath5k_hw_set_intr(sc->ah, sc->imask);
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(sc->ah, false);
{
struct ath5k_softc *sc = (void *)data;
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
/*
* to load new gain values.
*/
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
ATH5K_ERR(sc, "calibration of channel %u failed\n",
}
static int
-ath5k_reset(struct ieee80211_hw *hw)
+ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
{
- struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- ath5k_hw_set_intr(ah, 0);
- ath5k_txq_cleanup(sc);
- ath5k_rx_stop(sc);
-
+ if (stop) {
+ ath5k_hw_set_intr(ah, 0);
+ ath5k_txq_cleanup(sc);
+ ath5k_rx_stop(sc);
+ }
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
}
+
+ /*
+ * This is needed only to setup initial state
+ * but it's best done after a reset.
+ */
ath5k_hw_set_txpower_limit(sc->ah, 0);
ret = ath5k_rx_start(sc);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't start recv logic\n");
goto err;
}
+
/*
- * We may be doing a reset in response to an ioctl
- * that changes the channel so update any state that
- * might change as a result.
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
*
* XXX needed?
*/
/* ath5k_chan_change(sc, c); */
- ath5k_beacon_config(sc);
- /* intrs are started by ath5k_beacon_config */
- ieee80211_wake_queues(hw);
+ ath5k_beacon_config(sc);
+ /* intrs are enabled by ath5k_beacon_config */
return 0;
err:
return ret;
}
+static int
+ath5k_reset_wake(struct ath5k_softc *sc)
+{
+ int ret;
+
+ ret = ath5k_reset(sc, true, true);
+ if (!ret)
+ ieee80211_wake_queues(sc->hw);
+
+ return ret;
+}
+
static int ath5k_start(struct ieee80211_hw *hw)
{
return ath5k_init(hw->priv);
mutex_unlock(&sc->lock);
- return ath5k_reset(hw);
+ return ath5k_reset_wake(sc);
unlock:
mutex_unlock(&sc->lock);
return ret;
if (sc->opmode != IEEE80211_IF_TYPE_STA)
rfilt |= AR5K_RX_FILTER_PROBEREQ;
if (sc->opmode != IEEE80211_IF_TYPE_AP &&
+ sc->opmode != IEEE80211_IF_TYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
if (sc->opmode == IEEE80211_IF_TYPE_STA ||
struct ieee80211_hw *hw; /* IEEE 802.11 common */
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
struct ieee80211_channel channels[ATH_CHAN_MAX];
- struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS];
+ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+ u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
enum ieee80211_if_types opmode;
struct ath5k_hw *ah; /* Atheros HW */
struct ieee80211_supported_band *curband;
- u8 a_rates;
- u8 b_rates;
- u8 g_rates;
- u8 xr_rates;
-
#ifdef CONFIG_ATH5K_DEBUG
struct ath5k_dbg_info debug; /* debug info */
#endif /* CONFIG_ATH5K_DEBUG */
#include "base.h"
#include "debug.h"
-/* Rate tables */
-static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A;
-static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B;
-static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G;
-static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO;
-static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR;
-
/* Prototypes */
static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
return 0;
}
-/*
- * Get the rate table for a specific operation mode
- */
-const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah,
- unsigned int mode)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- if (!test_bit(mode, ah->ah_capabilities.cap_mode))
- return NULL;
-
- /* Get rate tables */
- switch (mode) {
- case AR5K_MODE_11A:
- return &ath5k_rt_11a;
- case AR5K_MODE_11A_TURBO:
- return &ath5k_rt_turbo;
- case AR5K_MODE_11B:
- return &ath5k_rt_11b;
- case AR5K_MODE_11G:
- return &ath5k_rt_11g;
- case AR5K_MODE_11G_TURBO:
- return &ath5k_rt_xr;
- }
-
- return NULL;
-}
-
/*
* Free the ath5k_hw struct
*/
return 0;
}
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static int control_rates[] =
+ { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
/**
* ath5k_hw_write_rate_duration - set rate duration during hw resets
*
* @ah: the &struct ath5k_hw
* @mode: one of enum ath5k_driver_mode
*
- * Write the rate duration table for the current mode upon hw reset. This
- * is a helper for ath5k_hw_reset(). It seems all this is doing is setting
- * an ACK timeout for the hardware for the current mode for each rate. The
- * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps,
- * and 11Mbps) have another register for the short preamble ACK timeout
- * calculation.
- *
+ * Write the rate duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
+ * the hardware for the current mode for each rate. The rates which are capable
+ * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
+ * register for the short preamble ACK timeout calculation.
*/
static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
unsigned int mode)
{
struct ath5k_softc *sc = ah->ah_sc;
- const struct ath5k_rate_table *rt;
- struct ieee80211_rate srate = {};
+ struct ieee80211_rate *rate;
unsigned int i;
- /* Get rate table for the current operating mode */
- rt = ath5k_hw_get_rate_table(ah, mode);
-
/* Write rate duration table */
- for (i = 0; i < rt->rate_count; i++) {
- const struct ath5k_rate *rate, *control_rate;
-
+ for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
u32 reg;
u16 tx_time;
- rate = &rt->rates[i];
- control_rate = &rt->rates[rate->control_rate];
+ rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
/* Set ACK timeout */
- reg = AR5K_RATE_DUR(rate->rate_code);
-
- srate.bitrate = control_rate->rate_kbps/100;
+ reg = AR5K_RATE_DUR(rate->hw_value);
/* An ACK frame consists of 10 bytes. If you add the FCS,
* which ieee80211_generic_frame_duration() adds,
* ieee80211_duration() for a brief description of
* what rate we should choose to TX ACKs. */
tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
- sc->vif, 10, &srate));
+ sc->vif, 10, rate));
ath5k_hw_reg_write(ah, tx_time, reg);
- if (!HAS_SHPREAMBLE(i))
+ if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
continue;
/*
break;
case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_MESH_POINT:
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
{
const struct ieee80211_hdr *wlhdr;
int use_encryption = !!info->control.hw_key;
- u16 fctl;
u8 rate;
struct ieee80211_rate *rate_fb;
int rate_ofdm;
struct ieee80211_rate *tx_rate;
wlhdr = (const struct ieee80211_hdr *)fragment_data;
- fctl = le16_to_cpu(wlhdr->frame_control);
memset(txhdr, 0, sizeof(*txhdr));
mac_ctl |= (key->algorithm <<
B43legacy_TX4_MAC_KEYALG_SHIFT) &
B43legacy_TX4_MAC_KEYALG;
- wlhdr_len = ieee80211_get_hdrlen(fctl);
+ wlhdr_len = ieee80211_hdrlen(wlhdr->frame_control);
iv_len = min((size_t)info->control.iv_len,
ARRAY_SIZE(txhdr->iv));
memcpy(txhdr->iv, ((u8 *)wlhdr) + wlhdr_len, iv_len);
Callable from any context.
*/
-static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0)
+static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
+ u16 param1, u16 param2)
{
int k = CMD_BUSY_TIMEOUT;
u16 reg;
return -EBUSY;
}
- hermes_write_regn(hw, PARAM2, 0);
- hermes_write_regn(hw, PARAM1, 0);
+ hermes_write_regn(hw, PARAM2, param2);
+ hermes_write_regn(hw, PARAM1, param1);
hermes_write_regn(hw, PARAM0, param0);
hermes_write_regn(hw, CMD, cmd);
* Function definitions
*/
+/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp)
+{
+ int err = 0;
+ int k;
+ u16 status, reg;
+
+ err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
+ if (err)
+ return err;
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = CMD_INIT_TIMEOUT;
+ while ((!(reg & HERMES_EV_CMD)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+
+ if (!hermes_present(hw)) {
+ DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
+ hw->iobase);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!(reg & HERMES_EV_CMD)) {
+ printk(KERN_ERR "hermes @ %p: "
+ "Timeout waiting for card to reset (reg=0x%04x)!\n",
+ hw->iobase, reg);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = hermes_read_regn(hw, STATUS);
+ if (resp) {
+ resp->status = status;
+ resp->resp0 = hermes_read_regn(hw, RESP0);
+ resp->resp1 = hermes_read_regn(hw, RESP1);
+ resp->resp2 = hermes_read_regn(hw, RESP2);
+ }
+
+ hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+ if (status & HERMES_STATUS_RESULT)
+ err = -EIO;
+out:
+ return err;
+}
+EXPORT_SYMBOL(hermes_doicmd_wait);
+
void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
{
hw->iobase = address;
hw->reg_spacing = reg_spacing;
hw->inten = 0x0;
}
+EXPORT_SYMBOL(hermes_struct_init);
int hermes_init(hermes_t *hw)
{
- u16 status, reg;
+ u16 reg;
int err = 0;
int k;
/* We don't use hermes_docmd_wait here, because the reset wipes
the magic constant in SWSUPPORT0 away, and it gets confused */
- err = hermes_issue_cmd(hw, HERMES_CMD_INIT, 0);
- if (err)
- return err;
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = CMD_INIT_TIMEOUT;
- while ( (! (reg & HERMES_EV_CMD)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-
- if (! hermes_present(hw)) {
- DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
- hw->iobase);
- err = -ENODEV;
- goto out;
- }
-
- if (! (reg & HERMES_EV_CMD)) {
- printk(KERN_ERR "hermes @ %p: "
- "Timeout waiting for card to reset (reg=0x%04x)!\n",
- hw->iobase, reg);
- err = -ETIMEDOUT;
- goto out;
- }
+ err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
- status = hermes_read_regn(hw, STATUS);
-
- hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
- if (status & HERMES_STATUS_RESULT)
- err = -EIO;
-
- out:
return err;
}
+EXPORT_SYMBOL(hermes_init);
/* Issue a command to the chip, and (busy!) wait for it to
* complete.
u16 reg;
u16 status;
- err = hermes_issue_cmd(hw, cmd, parm0);
+ err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
if (err) {
if (! hermes_present(hw)) {
if (net_ratelimit())
out:
return err;
}
+EXPORT_SYMBOL(hermes_docmd_wait);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
{
return 0;
}
-
+EXPORT_SYMBOL(hermes_allocate);
/* Set up a BAP to read a particular chunk of data from card's internal buffer.
*
out:
return err;
}
+EXPORT_SYMBOL(hermes_bap_pread);
/* Write a block of data to the chip's buffer, via the
* BAP. Synchronization/serialization is the caller's problem.
out:
return err;
}
+EXPORT_SYMBOL(hermes_bap_pwrite);
/* Read a Length-Type-Value record from the card.
*
if (rtype != rid)
printk(KERN_WARNING "hermes @ %p: %s(): "
"rid (0x%04x) does not match type (0x%04x)\n",
- hw->iobase, __FUNCTION__, rid, rtype);
+ hw->iobase, __func__, rid, rtype);
if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
printk(KERN_WARNING "hermes @ %p: "
"Truncating LTV record from %d to %d bytes. "
return 0;
}
+EXPORT_SYMBOL(hermes_read_ltv);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
u16 length, const void *value)
hermes_write_bytes(hw, dreg, value, count << 1);
- err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
+ err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
rid, NULL);
return err;
}
-
-EXPORT_SYMBOL(hermes_struct_init);
-EXPORT_SYMBOL(hermes_init);
-EXPORT_SYMBOL(hermes_docmd_wait);
-EXPORT_SYMBOL(hermes_allocate);
-
-EXPORT_SYMBOL(hermes_bap_pread);
-EXPORT_SYMBOL(hermes_bap_pwrite);
-EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
static int __init init_hermes(void)
#define HERMES_802_11_OFFSET (14)
#define HERMES_802_3_OFFSET (14+32)
#define HERMES_802_2_OFFSET (14+32+14)
+#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2)
#define HERMES_RXSTAT_ERR (0x0003)
#define HERMES_RXSTAT_BADCRC (0x0001)
#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
+#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */
#define HERMES_RXSTAT_MACPORT (0x0700)
#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
+#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */
#define HERMES_RXSTAT_MSGTYPE (0xE000)
#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
+/* Shift amount for key ID in RXSTAT and TXCTRL */
+#define HERMES_MIC_KEY_ID_SHIFT 11
+
struct hermes_tx_descriptor {
__le16 status;
__le16 reserved1;
#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
+#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */
+#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */
#define HERMES_TXCTRL_ALT_RTRY (0x0020)
/* Inquiry constants and data types */
struct symbol_scan_apinfo s;
};
+/* Extended scan struct for HERMES_INQ_CHANNELINFO.
+ * wl_lkm calls this an ACS scan (Automatic Channel Select).
+ * Keep out of union hermes_scan_info because it is much bigger than
+ * the older scan structures. */
+struct agere_ext_scan_info {
+ __le16 reserved0;
+
+ u8 noise;
+ u8 level;
+ u8 rx_flow;
+ u8 rate;
+ __le16 reserved1[2];
+
+ __le16 frame_control;
+ __le16 dur_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le16 sequence;
+ u8 addr4[ETH_ALEN];
+
+ __le16 data_length;
+
+ /* Next 3 fields do not get filled in. */
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ __le16 len_type;
+
+ __le64 timestamp;
+ __le16 beacon_interval;
+ __le16 capabilities;
+ u8 data[316];
+} __attribute__ ((packed));
+
#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
#define HERMES_LINKSTATUS_CONNECTED (0x0001)
#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
int hermes_init(hermes_t *hw);
int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
struct hermes_response *resp);
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
--- /dev/null
+/*
+ * Hermes download helper driver.
+ *
+ * This could be entirely merged into hermes.c.
+ *
+ * I'm keeping it separate to minimise the amount of merging between
+ * kernel upgrades. It also means the memory overhead for drivers that
+ * don't need firmware download low.
+ *
+ * This driver:
+ * - is capable of writing to the volatile area of the hermes device
+ * - is currently not capable of writing to non-volatile areas
+ * - provide helpers to identify and update plugin data
+ * - is not capable of interpreting a fw image directly. That is up to
+ * the main card driver.
+ * - deals with Hermes I devices. It can probably be modified to deal
+ * with Hermes II devices
+ *
+ * Copyright (C) 2007, David Kilroy
+ *
+ * Plug data code slightly modified from spectrum_cs driver
+ * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on information in wl_lkm_718 Agere driver
+ * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include "hermes.h"
+#include "hermes_dld.h"
+
+MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset");
+MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define PFX "hermes_dld: "
+
+/*
+ * AUX port access. To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register. Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
+#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0 0xFE01
+#define HERMES_AUX_PW1 0xDC23
+#define HERMES_AUX_PW2 0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
+/* End markers used in dblocks */
+#define PDI_END 0x00000000 /* End of PDA */
+#define BLOCK_END 0xFFFFFFFF /* Last image block */
+#define TEXT_END 0x1A /* End of text header */
+
+/*
+ * PDA == Production Data Area
+ *
+ * In principle, the max. size of the PDA is is 4096 words. Currently,
+ * however, only about 500 bytes of this area are used.
+ *
+ * Some USB implementations can't handle sizes in excess of 1016. Note
+ * that PDA is not actually used in those USB environments, but may be
+ * retrieved by common code.
+ */
+#define MAX_PDA_SIZE 1000
+
+/* Limit the amout we try to download in a single shot.
+ * Size is in bytes.
+ */
+#define MAX_DL_SIZE 1024
+#define LIMIT_PROGRAM_SIZE 0
+
+/*
+ * The following structures have little-endian fields denoted by
+ * the leading underscore. Don't access them directly - use inline
+ * functions defined below.
+ */
+
+/*
+ * The binary image to be downloaded consists of series of data blocks.
+ * Each block has the following structure.
+ */
+struct dblock {
+ __le32 addr; /* adapter address where to write the block */
+ __le16 len; /* length of the data only, in bytes */
+ char data[0]; /* data to be written */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data References are located in in the image after the last data
+ * block. They refer to areas in the adapter memory where the plug data
+ * items with matching ID should be written.
+ */
+struct pdr {
+ __le32 id; /* record ID */
+ __le32 addr; /* adapter address where to write the data */
+ __le32 len; /* expected length of the data, in bytes */
+ char next[0]; /* next PDR starts here */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data Items are located in the EEPROM read from the adapter by
+ * primary firmware. They refer to the device-specific data that should
+ * be plugged into the secondary firmware.
+ */
+struct pdi {
+ __le16 len; /* length of ID and data, in words */
+ __le16 id; /* record ID */
+ char data[0]; /* plug data */
+} __attribute__ ((packed));
+
+/*** FW data block access functions ***/
+
+static inline u32
+dblock_addr(const struct dblock *blk)
+{
+ return le32_to_cpu(blk->addr);
+}
+
+static inline u32
+dblock_len(const struct dblock *blk)
+{
+ return le16_to_cpu(blk->len);
+}
+
+/*** PDR Access functions ***/
+
+static inline u32
+pdr_id(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->id);
+}
+
+static inline u32
+pdr_addr(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->addr);
+}
+
+static inline u32
+pdr_len(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->len);
+}
+
+/*** PDI Access functions ***/
+
+static inline u32
+pdi_id(const struct pdi *pdi)
+{
+ return le16_to_cpu(pdi->id);
+}
+
+/* Return length of the data only, in bytes */
+static inline u32
+pdi_len(const struct pdi *pdi)
+{
+ return 2 * (le16_to_cpu(pdi->len) - 1);
+}
+
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+ hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+ hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+ int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+ int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+ int i;
+
+ /* Already open? */
+ if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+ return 0;
+
+ hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+ hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+ hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+ hermes_write_reg(hw, HERMES_CONTROL, action);
+
+ for (i = 0; i < 20; i++) {
+ udelay(10);
+ if (hermes_read_reg(hw, HERMES_CONTROL) ==
+ desired_state)
+ return 0;
+ }
+
+ return -EBUSY;
+}
+
+/*** Plug Data Functions ***/
+
+/*
+ * Scan PDR for the record with the specified RECORD_ID.
+ * If it's not found, return NULL.
+ */
+static struct pdr *
+hermes_find_pdr(struct pdr *first_pdr, u32 record_id)
+{
+ struct pdr *pdr = first_pdr;
+ void *end = (void *)first_pdr + MAX_PDA_SIZE;
+
+ while (((void *)pdr < end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ return NULL;
+
+ /* If the record ID matches, we are done */
+ if (pdr_id(pdr) == record_id)
+ return pdr;
+
+ pdr = (struct pdr *) pdr->next;
+ }
+ return NULL;
+}
+
+/* Scan production data items for a particular entry */
+static struct pdi *
+hermes_find_pdi(struct pdi *first_pdi, u32 record_id)
+{
+ struct pdi *pdi = first_pdi;
+
+ while (pdi_id(pdi) != PDI_END) {
+
+ /* If the record ID matches, we are done */
+ if (pdi_id(pdi) == record_id)
+ return pdi;
+
+ pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return NULL;
+}
+
+/* Process one Plug Data Item - find corresponding PDR and plug it */
+static int
+hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi)
+{
+ struct pdr *pdr;
+
+ /* Find the PDR corresponding to this PDI */
+ pdr = hermes_find_pdr(first_pdr, pdi_id(pdi));
+
+ /* No match is found, safe to ignore */
+ if (!pdr)
+ return 0;
+
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) != pdr_len(pdr))
+ return -EINVAL;
+
+ /* do the actual plugging */
+ hermes_aux_setaddr(hw, pdr_addr(pdr));
+ hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
+
+ return 0;
+}
+
+/* Read PDA from the adapter */
+int hermes_read_pda(hermes_t *hw,
+ __le16 *pda,
+ u32 pda_addr,
+ u16 pda_len,
+ int use_eeprom) /* can we get this into hw? */
+{
+ int ret;
+ u16 pda_size;
+ u16 data_len = pda_len;
+ __le16 *data = pda;
+
+ if (use_eeprom) {
+ /* PDA of spectrum symbol is in eeprom */
+
+ /* Issue command to read EEPROM */
+ ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+ if (ret)
+ return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
+ }
+
+ /* Open auxiliary port */
+ ret = hermes_aux_control(hw, 1);
+ printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
+ if (ret)
+ return ret;
+
+ /* read PDA from EEPROM */
+ hermes_aux_setaddr(hw, pda_addr);
+ hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+ /* Close aux port */
+ ret = hermes_aux_control(hw, 0);
+ printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
+
+ /* Check PDA length */
+ pda_size = le16_to_cpu(pda[0]);
+ printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
+ if (pda_size > pda_len)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(hermes_read_pda);
+
+/* Parse PDA and write the records into the adapter
+ *
+ * Attempt to write every records that is in the specified pda
+ * which also has a valid production data record for the firmware.
+ */
+int hermes_apply_pda(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda)
+{
+ int ret;
+ const struct pdi *pdi;
+ struct pdr *pdr;
+
+ pdr = (struct pdr *) first_pdr;
+
+ /* Go through every PDI and plug them into the adapter */
+ pdi = (const struct pdi *) (pda + 2);
+ while (pdi_id(pdi) != PDI_END) {
+ ret = hermes_plug_pdi(hw, pdr, pdi);
+ if (ret)
+ return ret;
+
+ /* Increment to the next PDI */
+ pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda);
+
+/* Identify the total number of bytes in all blocks
+ * including the header data.
+ */
+size_t
+hermes_blocks_length(const char *first_block)
+{
+ const struct dblock *blk = (const struct dblock *) first_block;
+ int total_len = 0;
+ int len;
+
+ /* Skip all blocks to locate Plug Data References
+ * (Spectrum CS) */
+ while (dblock_addr(blk) != BLOCK_END) {
+ len = dblock_len(blk);
+ total_len += sizeof(*blk) + len;
+ blk = (struct dblock *) &blk->data[len];
+ }
+
+ return total_len;
+}
+EXPORT_SYMBOL(hermes_blocks_length);
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using doicmd_wait rather than docmd_wait */
+ err = hermes_doicmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_doicmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+ err = hermes_doicmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
+ err);
+
+ return err;
+}
+EXPORT_SYMBOL(hermesi_program_init);
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_end(hermes_t *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+EXPORT_SYMBOL(hermesi_program_end);
+
+/* Program the data blocks */
+int hermes_program(hermes_t *hw, const char *first_block, const char *end)
+{
+ const struct dblock *blk;
+ u32 blkaddr;
+ u32 blklen;
+#if LIMIT_PROGRAM_SIZE
+ u32 addr;
+ u32 len;
+#endif
+
+ blk = (const struct dblock *) first_block;
+
+ if ((const char *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+
+ while ((blkaddr != BLOCK_END) &&
+ (((const char *) blk + blklen) <= end)) {
+ printk(KERN_DEBUG PFX
+ "Programming block of length %d to address 0x%08x\n",
+ blklen, blkaddr);
+
+#if !LIMIT_PROGRAM_SIZE
+ /* wl_lkm driver splits this into writes of 2000 bytes */
+ hermes_aux_setaddr(hw, blkaddr);
+ hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
+ blklen);
+#else
+ len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
+ addr = blkaddr;
+
+ while (addr < (blkaddr + blklen)) {
+ printk(KERN_DEBUG PFX
+ "Programming subblock of length %d "
+ "to address 0x%08x. Data @ %p\n",
+ len, addr, &blk->data[addr - blkaddr]);
+
+ hermes_aux_setaddr(hw, addr);
+ hermes_write_bytes(hw, HERMES_AUXDATA,
+ &blk->data[addr - blkaddr],
+ len);
+
+ addr += len;
+ len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
+ (blkaddr + blklen - addr) : MAX_DL_SIZE;
+ }
+#endif
+ blk = (const struct dblock *) &blk->data[blklen];
+
+ if ((const char *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_program);
+
+static int __init init_hermes_dld(void)
+{
+ return 0;
+}
+
+static void __exit exit_hermes_dld(void)
+{
+}
+
+module_init(init_hermes_dld);
+module_exit(exit_hermes_dld);
+
+/*** Default plugging data for Hermes I ***/
+/* Values from wl_lkm_718/hcf/dhf.c */
+
+#define DEFINE_DEFAULT_PDR(pid, length, data) \
+static const struct { \
+ __le16 len; \
+ __le16 id; \
+ u8 val[length]; \
+} __attribute__ ((packed)) default_pdr_data_##pid = { \
+ __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
+ sizeof(__le16)) - 1), \
+ __constant_cpu_to_le16(pid), \
+ data \
+}
+
+#define DEFAULT_PDR(pid) default_pdr_data_##pid
+
+/* HWIF Compatiblity */
+DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
+
+/* PPPPSign */
+DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
+
+/* PPPPProf */
+DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
+
+/* Antenna diversity */
+DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
+
+/* Modem VCO band Set-up */
+DEFINE_DEFAULT_PDR(0x0160, 28,
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00");
+
+/* Modem Rx Gain Table Values */
+DEFINE_DEFAULT_PDR(0x0161, 256,
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
+ "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
+ "\x3B\x01\x3A\01\x3A\x01\x39\x01"
+ "\x39\x01\x38\01\x38\x01\x37\x01"
+ "\x37\x01\x36\01\x36\x01\x35\x01"
+ "\x35\x01\x34\01\x34\x01\x33\x01"
+ "\x33\x01\x32\x01\x32\x01\x31\x01"
+ "\x31\x01\x30\x01\x30\x01\x7B\x01"
+ "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
+ "\x79\x01\x78\x01\x78\x01\x77\x01"
+ "\x77\x01\x76\x01\x76\x01\x75\x01"
+ "\x75\x01\x74\x01\x74\x01\x73\x01"
+ "\x73\x01\x72\x01\x72\x01\x71\x01"
+ "\x71\x01\x70\x01\x70\x01\x68\x01"
+ "\x68\x01\x67\x01\x67\x01\x66\x01"
+ "\x66\x01\x65\x01\x65\x01\x57\x01"
+ "\x57\x01\x56\x01\x56\x01\x55\x01"
+ "\x55\x01\x54\x01\x54\x01\x53\x01"
+ "\x53\x01\x52\x01\x52\x01\x51\x01"
+ "\x51\x01\x50\x01\x50\x01\x48\x01"
+ "\x48\x01\x47\x01\x47\x01\x46\x01"
+ "\x46\x01\x45\x01\x45\x01\x44\x01"
+ "\x44\x01\x43\x01\x43\x01\x42\x01"
+ "\x42\x01\x41\x01\x41\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01");
+
+/* Write PDA according to certain rules.
+ *
+ * For every production data record, look for a previous setting in
+ * the pda, and use that.
+ *
+ * For certain records, use defaults if they are not found in pda.
+ */
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda)
+{
+ const struct pdr *pdr = (const struct pdr *) first_pdr;
+ struct pdi *first_pdi = (struct pdi *) &pda[2];
+ struct pdi *pdi;
+ struct pdi *default_pdi = NULL;
+ struct pdi *outdoor_pdi;
+ void *end = (void *)first_pdr + MAX_PDA_SIZE;
+ int record_id;
+
+ while (((void *)pdr < end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * For spectrum_cs firmwares,
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ break;
+ record_id = pdr_id(pdr);
+
+ pdi = hermes_find_pdi(first_pdi, record_id);
+ if (pdi)
+ printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
+ record_id, pdi);
+
+ switch (record_id) {
+ case 0x110: /* Modem REFDAC values */
+ case 0x120: /* Modem VGDAC values */
+ outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1);
+ default_pdi = NULL;
+ if (outdoor_pdi) {
+ pdi = outdoor_pdi;
+ printk(KERN_DEBUG PFX
+ "Using outdoor record 0x%04x at %p\n",
+ record_id + 1, pdi);
+ }
+ break;
+ case 0x5: /* HWIF Compatiblity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
+ break;
+ case 0x108: /* PPPPSign */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
+ break;
+ case 0x109: /* PPPPProf */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
+ break;
+ case 0x150: /* Antenna diversity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
+ break;
+ case 0x160: /* Modem VCO band Set-up */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
+ break;
+ case 0x161: /* Modem Rx Gain Table Values */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
+ break;
+ default:
+ default_pdi = NULL;
+ break;
+ }
+ if (!pdi && default_pdi) {
+ /* Use default */
+ pdi = default_pdi;
+ printk(KERN_DEBUG PFX
+ "Using default record 0x%04x at %p\n",
+ record_id, pdi);
+ }
+
+ if (pdi) {
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) == pdr_len(pdr)) {
+ /* do the actual plugging */
+ hermes_aux_setaddr(hw, pdr_addr(pdr));
+ hermes_write_bytes(hw, HERMES_AUXDATA,
+ pdi->data, pdi_len(pdi));
+ }
+ }
+
+ pdr++;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda_with_defaults);
--- /dev/null
+/*
+ * Copyright (C) 2007, David Kilroy
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+#ifndef _HERMES_DLD_H
+#define _HERMES_DLD_H
+
+#include "hermes.h"
+
+int hermesi_program_init(hermes_t *hw, u32 offset);
+int hermesi_program_end(hermes_t *hw);
+int hermes_program(hermes_t *hw, const char *first_block, const char *end);
+
+int hermes_read_pda(hermes_t *hw,
+ __le16 *pda,
+ u32 pda_addr,
+ u16 pda_len,
+ int use_eeprom);
+int hermes_apply_pda(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda);
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda);
+
+size_t hermes_blocks_length(const char *first_block);
+
+#endif /* _HERMES_DLD_H */
#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20
#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21
#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21
+#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22
#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23
#define HERMES_RID_CNFDEFAULTKEY0 0xFC24
#define HERMES_RID_CNFDEFAULTKEY1 0xFC25
#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2
#define HERMES_RID_CNFBASICRATES 0xFCB3
#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4
+#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4
+#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5
+#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6
+#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7
+#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8
+#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9
+#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA
+#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB
+#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2
+#define HERMES_RID_CNFDISASSOCIATE 0xFCC8
#define HERMES_RID_CNFTICKTIME 0xFCE0
#define HERMES_RID_CNFSCANREQUEST 0xFCE1
#define HERMES_RID_CNFJOINREQUEST 0xFCE2
#define HERMES_RID_CURRENTTXRATE6 0xFD85
#define HERMES_RID_OWNMACADDR 0xFD86
#define HERMES_RID_SCANRESULTSTABLE 0xFD88
+#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89
+#define HERMES_RID_CURRENT_WPA_IE 0xFD8A
+#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B
+#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C
+#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D
+#define HERMES_RID_TXQUEUEEMPTY 0xFD91
#define HERMES_RID_PHYTYPE 0xFDC0
#define HERMES_RID_CURRENTCHANNEL 0xFDC1
#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2
do { \
if (ipw2100_debug_level & (level)) { \
printk(KERN_DEBUG "ipw2100: %c %s ", \
- in_interrupt() ? 'I' : 'U', __FUNCTION__); \
+ in_interrupt() ? 'I' : 'U', __func__); \
printk(message); \
} \
} while (0)
#define IPW_DEBUG(level, fmt, args...) \
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
- in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+ in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
#ifdef CONFIG_IPW2200_DEBUG
#define IPW_LL_DEBUG(level, fmt, args...) \
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
- in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+ in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
#else
#define IPW_LL_DEBUG(level, fmt, args...) do {} while (0)
#endif /* CONFIG_IPW2200_DEBUG */
#define IWL_DEBUG(level, fmt, args...) \
do { if (iwl3945_debug_level & (level)) \
printk(KERN_ERR DRV_NAME": %c %s " fmt, \
- in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+ in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
#define IWL_DEBUG_LIMIT(level, fmt, args...) \
do { if ((iwl3945_debug_level & (level)) && net_ratelimit()) \
printk(KERN_ERR DRV_NAME": %c %s " fmt, \
- in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+ in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
static inline void iwl3945_print_hex_dump(int level, void *p, u32 len)
{
}
}
-static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
- struct sk_buff *skb,
- struct iwl3945_rx_frame_hdr *rx_hdr,
- struct ieee80211_rx_status *stats)
-{
- /* First cache any information we need before we overwrite
- * the information provided in the skb from the hardware */
- s8 signal = stats->signal;
- s8 noise = 0;
- int rate = stats->rate_idx;
- u64 tsf = stats->mactime;
- __le16 phy_flags_hw = rx_hdr->phy_flags, antenna;
-
- struct iwl3945_rt_rx_hdr {
- struct ieee80211_radiotap_header rt_hdr;
- __le64 rt_tsf; /* TSF */
- u8 rt_flags; /* radiotap packet flags */
- u8 rt_rate; /* rate in 500kb/s */
- __le16 rt_channelMHz; /* channel in MHz */
- __le16 rt_chbitmask; /* channel bitfield */
- s8 rt_dbmsignal; /* signal in dBm, kluged to signed */
- s8 rt_dbmnoise;
- u8 rt_antenna; /* antenna number */
- } __attribute__ ((packed)) *iwl3945_rt;
-
- if (skb_headroom(skb) < sizeof(*iwl3945_rt)) {
- if (net_ratelimit())
- printk(KERN_ERR "not enough headroom [%d] for "
- "radiotap head [%zd]\n",
- skb_headroom(skb), sizeof(*iwl3945_rt));
- return;
- }
-
- /* put radiotap header in front of 802.11 header and data */
- iwl3945_rt = (void *)skb_push(skb, sizeof(*iwl3945_rt));
-
- /* initialise radiotap header */
- iwl3945_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
- iwl3945_rt->rt_hdr.it_pad = 0;
-
- /* total header + data */
- put_unaligned_le16(sizeof(*iwl3945_rt), &iwl3945_rt->rt_hdr.it_len);
-
- /* Indicate all the fields we add to the radiotap header */
- put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) |
- (1 << IEEE80211_RADIOTAP_FLAGS) |
- (1 << IEEE80211_RADIOTAP_RATE) |
- (1 << IEEE80211_RADIOTAP_CHANNEL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
- (1 << IEEE80211_RADIOTAP_ANTENNA),
- &iwl3945_rt->rt_hdr.it_present);
-
- /* Zero the flags, we'll add to them as we go */
- iwl3945_rt->rt_flags = 0;
-
- put_unaligned_le64(tsf, &iwl3945_rt->rt_tsf);
-
- iwl3945_rt->rt_dbmsignal = signal;
- iwl3945_rt->rt_dbmnoise = noise;
-
- /* Convert the channel frequency and set the flags */
- put_unaligned_le16(stats->freq, &iwl3945_rt->rt_channelMHz);
- if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK))
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
- &iwl3945_rt->rt_chbitmask);
- else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK)
- put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
- &iwl3945_rt->rt_chbitmask);
- else /* 802.11g */
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
- &iwl3945_rt->rt_chbitmask);
-
- if (rate == -1)
- iwl3945_rt->rt_rate = 0;
- else {
- if (stats->band == IEEE80211_BAND_5GHZ)
- rate += IWL_FIRST_OFDM_RATE;
-
- iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee;
- }
-
- /* antenna number */
- antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
- iwl3945_rt->rt_antenna = le16_to_cpu(antenna) >> 4;
-
- /* set the preamble flag if we have it */
- if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- iwl3945_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
-
- stats->flag |= RX_FLAG_RADIOTAP;
-}
-
static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
struct iwl3945_rx_mem_buffer *rxb,
struct ieee80211_rx_status *stats)
iwl3945_set_decrypted_flag(priv, rxb->skb,
le32_to_cpu(rx_end->status), stats);
- if (priv->add_radiotap)
- iwl3945_add_radiotap(priv, rxb->skb, rx_hdr, stats);
-
#ifdef CONFIG_IWL3945_LEDS
if (ieee80211_is_data(hdr->frame_control))
priv->rxtxpackets += len;
u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
u8 network_packet;
- rx_status.antenna = 0;
rx_status.flag = 0;
rx_status.mactime = le64_to_cpu(rx_end->timestamp);
rx_status.freq =
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
+ rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
+ RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
+
+ /* set the preamble flag if appropriate */
+ if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
if ((unlikely(rx_stats->phy_count > 20))) {
IWL_DEBUG_DROP
("dsp size out of range [0,20]: "
enum ieee80211_band band;
int alloc_rxb_skb;
- bool add_radiotap;
void (*rx_handlers[REPLY_MAX])(struct iwl3945_priv *priv,
struct iwl3945_rx_mem_buffer *rxb);
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
- priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
-
if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n");
goto out;
spin_lock_init(&priv->power_data.lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
- spin_lock_init(&priv->lq_mngr.lock);
INIT_LIST_HEAD(&priv->free_frames);
*
*/
-#define IWL_DL_INFO (1 << 0)
-#define IWL_DL_MAC80211 (1 << 1)
-#define IWL_DL_HOST_COMMAND (1 << 2)
-#define IWL_DL_STATE (1 << 3)
+#define IWL_DL_INFO (1 << 0)
+#define IWL_DL_MAC80211 (1 << 1)
+#define IWL_DL_HCMD (1 << 2)
+#define IWL_DL_STATE (1 << 3)
#define IWL_DL_MACDUMP (1 << 4)
+#define IWL_DL_HCMD_DUMP (1 << 5)
#define IWL_DL_RADIO (1 << 7)
#define IWL_DL_POWER (1 << 8)
#define IWL_DL_TEMP (1 << 9)
#define IWL_DEBUG_ISR(f, a...) IWL_DEBUG(IWL_DL_ISR, f, ## a)
#define IWL_DEBUG_LED(f, a...) IWL_DEBUG(IWL_DL_LED, f, ## a)
#define IWL_DEBUG_WEP(f, a...) IWL_DEBUG(IWL_DL_WEP, f, ## a)
-#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HOST_COMMAND, f, ## a)
+#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HCMD, f, ## a)
+#define IWL_DEBUG_HC_DUMP(f, a...) IWL_DEBUG(IWL_DL_HCMD_DUMP, f, ## a)
#define IWL_DEBUG_CALIB(f, a...) IWL_DEBUG(IWL_DL_CALIB, f, ## a)
#define IWL_DEBUG_FW(f, a...) IWL_DEBUG(IWL_DL_FW, f, ## a)
#define IWL_DEBUG_RF_KILL(f, a...) IWL_DEBUG(IWL_DL_RF_KILL, f, ## a)
#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
-struct iwl4965_lq_mngr {
- spinlock_t lock;
- s32 max_window_size;
- s32 *expected_tpt;
- u8 *next_higher_rate;
- u8 *next_lower_rate;
- unsigned long stamp;
- unsigned long stamp_last;
- u32 flush_time;
- u32 tx_packets;
-};
-
/* Sensitivity and chain noise calibration */
#define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1)
#define INITIALIZATION_VALUE 0xFFFF
enum ieee80211_band band;
int alloc_rxb_skb;
- bool add_radiotap;
void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
struct iwl_ht_info current_ht_config;
u8 last_phy_res[100];
- /* Rate scaling data */
- struct iwl4965_lq_mngr lq_mngr;
-
/* Rate scaling data */
s8 data_retry_limit;
u8 retry_rate;
return 1;
}
- IWL_DEBUG_HC("back from %s (0x%08X)\n",
- get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+#ifdef CONFIG_IWLWIFI_DEBUG
+ switch (cmd->hdr.cmd) {
+ case REPLY_TX_LINK_QUALITY_CMD:
+ case SENSITIVITY_CMD:
+ IWL_DEBUG_HC_DUMP("back from %s (0x%08X)\n",
+ get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+ break;
+ default:
+ IWL_DEBUG_HC("back from %s (0x%08X)\n",
+ get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+ }
+#endif
/* Let iwl_tx_complete free the response skb */
return 1;
}
#endif
-static void iwl_add_radiotap(struct iwl_priv *priv,
- struct sk_buff *skb,
- struct iwl_rx_phy_res *rx_start,
- struct ieee80211_rx_status *stats,
- u32 ampdu_status)
-{
- s8 signal = stats->signal;
- s8 noise = 0;
- int rate = stats->rate_idx;
- u64 tsf = stats->mactime;
- __le16 antenna;
- __le16 phy_flags_hw = rx_start->phy_flags;
- struct iwl4965_rt_rx_hdr {
- struct ieee80211_radiotap_header rt_hdr;
- __le64 rt_tsf; /* TSF */
- u8 rt_flags; /* radiotap packet flags */
- u8 rt_rate; /* rate in 500kb/s */
- __le16 rt_channelMHz; /* channel in MHz */
- __le16 rt_chbitmask; /* channel bitfield */
- s8 rt_dbmsignal; /* signal in dBm, kluged to signed */
- s8 rt_dbmnoise;
- u8 rt_antenna; /* antenna number */
- } __attribute__ ((packed)) *iwl4965_rt;
-
- /* TODO: We won't have enough headroom for HT frames. Fix it later. */
- if (skb_headroom(skb) < sizeof(*iwl4965_rt)) {
- if (net_ratelimit())
- printk(KERN_ERR "not enough headroom [%d] for "
- "radiotap head [%zd]\n",
- skb_headroom(skb), sizeof(*iwl4965_rt));
- return;
- }
-
- /* put radiotap header in front of 802.11 header and data */
- iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt));
-
- /* initialise radiotap header */
- iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
- iwl4965_rt->rt_hdr.it_pad = 0;
-
- /* total header + data */
- put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len);
-
- /* Indicate all the fields we add to the radiotap header */
- put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) |
- (1 << IEEE80211_RADIOTAP_FLAGS) |
- (1 << IEEE80211_RADIOTAP_RATE) |
- (1 << IEEE80211_RADIOTAP_CHANNEL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
- (1 << IEEE80211_RADIOTAP_ANTENNA),
- &(iwl4965_rt->rt_hdr.it_present));
-
- /* Zero the flags, we'll add to them as we go */
- iwl4965_rt->rt_flags = 0;
-
- put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf);
-
- iwl4965_rt->rt_dbmsignal = signal;
- iwl4965_rt->rt_dbmnoise = noise;
-
- /* Convert the channel frequency and set the flags */
- put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz);
- if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK))
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
- &iwl4965_rt->rt_chbitmask);
- else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK)
- put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
- &iwl4965_rt->rt_chbitmask);
- else /* 802.11g */
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
- &iwl4965_rt->rt_chbitmask);
-
- if (rate == -1)
- iwl4965_rt->rt_rate = 0;
- else
- iwl4965_rt->rt_rate = iwl_rates[rate].ieee;
-
- /*
- * "antenna number"
- *
- * It seems that the antenna field in the phy flags value
- * is actually a bitfield. This is undefined by radiotap,
- * it wants an actual antenna number but I always get "7"
- * for most legacy frames I receive indicating that the
- * same frame was received on all three RX chains.
- *
- * I think this field should be removed in favour of a
- * new 802.11n radiotap field "RX chains" that is defined
- * as a bitmask.
- */
- antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
- iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4;
-
- /* set the preamble flag if appropriate */
- if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
-
- stats->flag |= RX_FLAG_RADIOTAP;
-}
-
static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len)
{
/* 0 - mgmt, 1 - cnt, 2 - data */
iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
- if (priv->add_radiotap)
- iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status);
-
iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len);
ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
priv->alloc_rxb_skb--;
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
- rx_status.antenna = 0;
rx_status.flag = 0;
rx_status.flag |= RX_FLAG_TSFT;
rx_status.signal, rx_status.noise, rx_status.signal,
(unsigned long long)rx_status.mactime);
+ /*
+ * "antenna number"
+ *
+ * It seems that the antenna field in the phy flags value
+ * is actually a bitfield. This is undefined by radiotap,
+ * it wants an actual antenna number but I always get "7"
+ * for most legacy frames I receive indicating that the
+ * same frame was received on all three RX chains.
+ *
+ * I think this field should be removed in favour of a
+ * new 802.11n radiotap field "RX chains" that is defined
+ * as a bitmask.
+ */
+ rx_status.antenna = le16_to_cpu(rx_start->phy_flags &
+ RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
+
+ /* set the preamble flag if appropriate */
+ if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
/* Take shortcut when only in monitor mode */
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
iwl_pass_packet_to_mac80211(priv, include_phy,
u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs);
/* Each TFD can point to a maximum 20 Tx buffers */
- if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) {
+ if (num_tbs >= MAX_NUM_OF_TBS) {
IWL_ERROR("Error can not send more than %d chunks\n",
MAX_NUM_OF_TBS);
return -EINVAL;
spin_unlock_irqrestore(&priv->lock, flags);
- hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc));
+ hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
sta_id = iwl_get_sta_id(priv, hdr);
txq_id = swq_id;
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
+ tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
seq_number = priv->stations[sta_id].tid[tid].seq_number;
seq_number &= IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = hdr->seq_ctrl &
phys_addr += offsetof(struct iwl_cmd, hdr);
iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
- IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
- "%d bytes at %d[%d]:%d\n",
- get_cmd_string(out_cmd->hdr.cmd),
- out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
- fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
-
+#ifdef CONFIG_IWLWIFI_DEBUG
+ switch (out_cmd->hdr.cmd) {
+ case REPLY_TX_LINK_QUALITY_CMD:
+ case SENSITIVITY_CMD:
+ IWL_DEBUG_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, "
+ "%d bytes at %d[%d]:%d\n",
+ get_cmd_string(out_cmd->hdr.cmd),
+ out_cmd->hdr.cmd,
+ le16_to_cpu(out_cmd->hdr.sequence), fix_size,
+ q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
+ break;
+ default:
+ IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
+ "%d bytes at %d[%d]:%d\n",
+ get_cmd_string(out_cmd->hdr.cmd),
+ out_cmd->hdr.cmd,
+ le16_to_cpu(out_cmd->hdr.sequence), fix_size,
+ q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
+ }
+#endif
txq->need_update = 1;
/* Set up entry in queue's byte count circular buffer */
spin_unlock_irqrestore(&priv->lock, flags);
- hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc));
+ hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
sta_id = iwl3945_get_sta_id(priv, hdr);
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
+ tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
seq_number = priv->stations[sta_id].tid[tid].seq_number &
IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = cpu_to_le16(seq_number) |
sizeof(out_cmd->cmd.tx));
iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
- ieee80211_get_hdrlen(le16_to_cpu(fc)));
+ ieee80211_hdrlen(fc));
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
- priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
-
if (!iwl3945_is_ready(priv)) {
IWL_DEBUG_MAC80211("leave - not ready\n");
ret = -EIO;
return ret;
}
-int lbs_mesh_config_send(struct lbs_private *priv,
- struct cmd_ds_mesh_config *cmd,
- uint16_t action, uint16_t type)
+static int __lbs_mesh_config_send(struct lbs_private *priv,
+ struct cmd_ds_mesh_config *cmd,
+ uint16_t action, uint16_t type)
{
int ret;
return ret;
}
+int lbs_mesh_config_send(struct lbs_private *priv,
+ struct cmd_ds_mesh_config *cmd,
+ uint16_t action, uint16_t type)
+{
+ int ret;
+
+ if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
+ return -EOPNOTSUPP;
+
+ ret = __lbs_mesh_config_send(priv, cmd, action, type);
+ return ret;
+}
+
/* This function is the CMD_MESH_CONFIG legacy function. It only handles the
* START and STOP actions. The extended actions supported by CMD_MESH_CONFIG
* are all handled by preparing a struct cmd_ds_mesh_config and passing it to
action, priv->mesh_tlv, chan,
escape_essid(priv->mesh_ssid, priv->mesh_ssid_len));
- return lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
+ return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
}
static int lbs_cmd_bcn_ctrl(struct lbs_private * priv,
#define CMD_F_HOSTCMD (1 << 0)
#define FW_CAPINFO_WPA (1 << 0)
+#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
+#define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
+#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
#define KEY_LEN_WPA_AES 16
#define KEY_LEN_WPA_TKIP 32
enum DNLD_STATE {
DNLD_RES_RECEIVED,
DNLD_DATA_SENT,
- DNLD_CMD_SENT
+ DNLD_CMD_SENT,
+ DNLD_BOOTCMD_SENT,
};
/** LBS_MEDIA_STATE */
ret = if_cs_send_cmd(priv, buf, nb);
break;
default:
- lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type);
+ lbs_pr_err("%s: unsupported type %d\n", __func__, type);
}
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
static void if_usb_receive(struct urb *urb);
static void if_usb_receive_fwload(struct urb *urb);
-static int if_usb_prog_firmware(struct if_usb_card *cardp);
+static int __if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd);
+static int if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd);
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb);
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
static int if_usb_reset_device(struct if_usb_card *cardp);
+/* sysfs hooks */
+
+/**
+ * Set function to write firmware to device's persistent memory
+ */
+static ssize_t if_usb_firmware_set(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct lbs_private *priv = to_net_dev(dev)->priv;
+ struct if_usb_card *cardp = priv->card;
+ char fwname[FIRMWARE_NAME_MAX];
+ int ret;
+
+ sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
+ ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW);
+ if (ret == 0)
+ return count;
+
+ return ret;
+}
+
+/**
+ * lbs_flash_fw attribute to be exported per ethX interface through sysfs
+ * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
+ * the device's persistent memory:
+ * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
+ */
+static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
+
+/**
+ * Set function to write firmware to device's persistent memory
+ */
+static ssize_t if_usb_boot2_set(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct lbs_private *priv = to_net_dev(dev)->priv;
+ struct if_usb_card *cardp = priv->card;
+ char fwname[FIRMWARE_NAME_MAX];
+ int ret;
+
+ sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
+ ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2);
+ if (ret == 0)
+ return count;
+
+ return ret;
+}
+
+/**
+ * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
+ * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
+ * to the device's persistent memory:
+ * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
+ */
+static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
+
/**
* @brief call back function to handle the status of the URB
* @param urb pointer to urb structure
lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
urb->actual_length);
- /* Used for both firmware TX and regular TX. priv isn't
- * valid at firmware load time.
+ /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
+ * passed up to the lbs level.
*/
- if (priv)
+ if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
lbs_host_to_card_done(priv);
} else {
/* print the failure status number for debug */
}
/* Upload firmware */
- if (if_usb_prog_firmware(cardp)) {
+ if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
lbs_deb_usbd(&udev->dev, "FW upload failed\n");
goto err_prog_firmware;
}
usb_get_dev(udev);
usb_set_intfdata(intf, cardp);
+ if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
+ lbs_pr_err("cannot register lbs_flash_fw attribute\n");
+
+ if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
+ lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
+
return 0;
err_start_card:
lbs_deb_enter(LBS_DEB_MAIN);
+ device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
+ device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
+
cardp->surprise_removed = 1;
if (priv) {
if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
kfree_skb(skb);
if_usb_submit_rx_urb_fwload(cardp);
- cardp->bootcmdresp = 1;
+ cardp->bootcmdresp = BOOT_CMD_RESP_OK;
lbs_deb_usbd(&cardp->udev->dev,
"Received valid boot command response\n");
return;
lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
le32_to_cpu(bootcmdresp.magic));
}
- } else if (bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) {
+ } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
+ (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
+ (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
bootcmdresp.cmd);
} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
kfree_skb(skb);
- /* reschedule timer for 200ms hence */
- mod_timer(&cardp->fw_timeout, jiffies + (HZ/5));
+ /* Give device 5s to either write firmware to its RAM or eeprom */
+ mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
if (cardp->fwfinalblk) {
cardp->fwdnldover = 1;
}
-static int if_usb_prog_firmware(struct if_usb_card *cardp)
+/**
+* @brief This function programs the firmware subject to cmd
+*
+* @param cardp the if_usb_card descriptor
+* fwname firmware or boot2 image file name
+* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
+* or BOOT_CMD_UPDATE_BOOT2.
+* @return 0 or error code
+*/
+static int if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd)
+{
+ struct lbs_private *priv = cardp->priv;
+ unsigned long flags, caps;
+ int ret;
+
+ caps = priv->fwcapinfo;
+ if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
+ ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
+ return -EOPNOTSUPP;
+
+ /* Ensure main thread is idle. */
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ if (wait_event_interruptible(priv->waitq,
+ (priv->cur_cmd == NULL &&
+ priv->dnld_sent == DNLD_RES_RECEIVED))) {
+ return -ERESTARTSYS;
+ }
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ }
+ priv->dnld_sent = DNLD_BOOTCMD_SENT;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ ret = __if_usb_prog_firmware(cardp, fwname, cmd);
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->dnld_sent = DNLD_RES_RECEIVED;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ wake_up_interruptible(&priv->waitq);
+
+ return ret;
+}
+
+static int __if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd)
{
int i = 0;
static int reset_count = 10;
lbs_deb_enter(LBS_DEB_USB);
- if ((ret = request_firmware(&cardp->fw, lbs_fw_name,
- &cardp->udev->dev)) < 0) {
+ ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
+ if (ret < 0) {
lbs_pr_err("request_firmware() failed with %#x\n", ret);
- lbs_pr_err("firmware %s not found\n", lbs_fw_name);
+ lbs_pr_err("firmware %s not found\n", fwname);
goto done;
}
- if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
+ if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
+ ret = -EINVAL;
goto release_fw;
+ }
+
+ /* Cancel any pending usb business */
+ usb_kill_urb(cardp->rx_urb);
+ usb_kill_urb(cardp->tx_urb);
+
+ cardp->fwlastblksent = 0;
+ cardp->fwdnldover = 0;
+ cardp->totalbytes = 0;
+ cardp->fwfinalblk = 0;
+ cardp->bootcmdresp = 0;
restart:
if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
- ret = -1;
+ ret = -EIO;
goto release_fw;
}
do {
int j = 0;
i++;
- /* Issue Boot command = 1, Boot from Download-FW */
- if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
+ if_usb_issue_boot_command(cardp, cmd);
/* wait for command response */
do {
j++;
} while (cardp->bootcmdresp == 0 && j < 10);
} while (cardp->bootcmdresp == 0 && i < 5);
- if (cardp->bootcmdresp <= 0) {
+ if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
+ /* Return to normal operation */
+ ret = -EOPNOTSUPP;
+ usb_kill_urb(cardp->rx_urb);
+ usb_kill_urb(cardp->tx_urb);
+ if (if_usb_submit_rx_urb(cardp) < 0)
+ ret = -EIO;
+ goto release_fw;
+ } else if (cardp->bootcmdresp <= 0) {
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
- return -1;
+ ret = -EIO;
+ goto release_fw;
}
i = 0;
}
lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
- ret = -1;
+ ret = -EIO;
goto release_fw;
}
#define BOOT_CMD_RESP_OK 0x0001
#define BOOT_CMD_RESP_FAIL 0x0000
+#define BOOT_CMD_RESP_NOT_SUPPORTED 0x0002
struct bootcmdresp
{
uint8_t ep_in;
uint8_t ep_out;
+ /* bootcmdresp == 0 means command is pending
+ * bootcmdresp < 0 means error
+ * bootcmdresp > 0 is a BOOT_CMD_RESP_* from firmware
+ */
int8_t bootcmdresp;
int ep_in_size;
--- /dev/null
+libertas_tf-objs := main.o cmd.o
+
+libertas_tf_usb-objs += if_usb.o
+
+obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf.o
+obj-$(CONFIG_LIBERTAS_THINFIRM_USB) += libertas_tf_usb.o
--- /dev/null
+/*
+ * Copyright (C) 2008, cozybit Inc.
+ * Copyright (C) 2003-2006, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include "libertas_tf.h"
+
+static const struct channel_range channel_ranges[] = {
+ { LBTF_REGDOMAIN_US, 1, 12 },
+ { LBTF_REGDOMAIN_CA, 1, 12 },
+ { LBTF_REGDOMAIN_EU, 1, 14 },
+ { LBTF_REGDOMAIN_JP, 1, 14 },
+ { LBTF_REGDOMAIN_SP, 1, 14 },
+ { LBTF_REGDOMAIN_FR, 1, 14 },
+};
+
+static u16 lbtf_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
+{
+ LBTF_REGDOMAIN_US, LBTF_REGDOMAIN_CA, LBTF_REGDOMAIN_EU,
+ LBTF_REGDOMAIN_SP, LBTF_REGDOMAIN_FR, LBTF_REGDOMAIN_JP,
+};
+
+static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv);
+
+
+/**
+ * lbtf_cmd_copyback - Simple callback that copies response back into command
+ *
+ * @priv A pointer to struct lbtf_private structure
+ * @extra A pointer to the original command structure for which
+ * 'resp' is a response
+ * @resp A pointer to the command response
+ *
+ * Returns: 0 on success, error on failure
+ */
+int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra,
+ struct cmd_header *resp)
+{
+ struct cmd_header *buf = (void *)extra;
+ uint16_t copy_len;
+
+ copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size));
+ memcpy(buf, resp, copy_len);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lbtf_cmd_copyback);
+
+#define CHAN_TO_IDX(chan) ((chan) - 1)
+
+static void lbtf_geo_init(struct lbtf_private *priv)
+{
+ const struct channel_range *range = channel_ranges;
+ u8 ch;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(channel_ranges); i++)
+ if (channel_ranges[i].regdomain == priv->regioncode) {
+ range = &channel_ranges[i];
+ break;
+ }
+
+ for (ch = priv->range.start; ch < priv->range.end; ch++)
+ priv->channels[CHAN_TO_IDX(ch)].flags = 0;
+}
+
+/**
+ * lbtf_update_hw_spec: Updates the hardware details.
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: 0 on success, error on failure
+ */
+int lbtf_update_hw_spec(struct lbtf_private *priv)
+{
+ struct cmd_ds_get_hw_spec cmd;
+ int ret = -1;
+ u32 i;
+ DECLARE_MAC_BUF(mac);
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN);
+ ret = lbtf_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd);
+ if (ret)
+ goto out;
+
+ priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo);
+
+ /* The firmware release is in an interesting format: the patch
+ * level is in the most significant nibble ... so fix that: */
+ priv->fwrelease = le32_to_cpu(cmd.fwrelease);
+ priv->fwrelease = (priv->fwrelease << 8) |
+ (priv->fwrelease >> 24 & 0xff);
+
+ printk(KERN_INFO "libertastf: %s, fw %u.%u.%up%u, cap 0x%08x\n",
+ print_mac(mac, cmd.permanentaddr),
+ priv->fwrelease >> 24 & 0xff,
+ priv->fwrelease >> 16 & 0xff,
+ priv->fwrelease >> 8 & 0xff,
+ priv->fwrelease & 0xff,
+ priv->fwcapinfo);
+
+ /* Clamp region code to 8-bit since FW spec indicates that it should
+ * only ever be 8-bit, even though the field size is 16-bit. Some
+ * firmware returns non-zero high 8 bits here.
+ */
+ priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+
+ for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
+ /* use the region code to search for the index */
+ if (priv->regioncode == lbtf_region_code_to_index[i])
+ break;
+ }
+
+ /* if it's unidentified region code, use the default (USA) */
+ if (i >= MRVDRV_MAX_REGION_CODE)
+ priv->regioncode = 0x10;
+
+ if (priv->current_addr[0] == 0xff)
+ memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN);
+
+ SET_IEEE80211_PERM_ADDR(priv->hw, priv->current_addr);
+
+ lbtf_geo_init(priv);
+out:
+ return ret;
+}
+
+/**
+ * lbtf_set_channel: Set the radio channel
+ *
+ * @priv A pointer to struct lbtf_private structure
+ * @channel The desired channel, or 0 to clear a locked channel
+ *
+ * Returns: 0 on success, error on failure
+ */
+int lbtf_set_channel(struct lbtf_private *priv, u8 channel)
+{
+ struct cmd_ds_802_11_rf_channel cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET);
+ cmd.channel = cpu_to_le16(channel);
+
+ return lbtf_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd);
+}
+
+int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon)
+{
+ struct cmd_ds_802_11_beacon_set cmd;
+ int size;
+
+ if (beacon->len > MRVL_MAX_BCN_SIZE)
+ return -1;
+ size = sizeof(cmd) - sizeof(cmd.beacon) + beacon->len;
+ cmd.hdr.size = cpu_to_le16(size);
+ cmd.len = cpu_to_le16(beacon->len);
+ memcpy(cmd.beacon, (u8 *) beacon->data, beacon->len);
+
+ lbtf_cmd_async(priv, CMD_802_11_BEACON_SET, &cmd.hdr, size);
+ return 0;
+}
+
+int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable,
+ int beacon_int) {
+ struct cmd_ds_802_11_beacon_control cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ cmd.beacon_enable = cpu_to_le16(beacon_enable);
+ cmd.beacon_period = cpu_to_le16(beacon_int);
+
+ lbtf_cmd_async(priv, CMD_802_11_BEACON_CTRL, &cmd.hdr, sizeof(cmd));
+ return 0;
+}
+
+static void lbtf_queue_cmd(struct lbtf_private *priv,
+ struct cmd_ctrl_node *cmdnode)
+{
+ unsigned long flags;
+
+ if (!cmdnode)
+ return;
+
+ if (!cmdnode->cmdbuf->size)
+ return;
+
+ cmdnode->result = 0;
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ list_add_tail(&cmdnode->list, &priv->cmdpendingq);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+}
+
+static void lbtf_submit_command(struct lbtf_private *priv,
+ struct cmd_ctrl_node *cmdnode)
+{
+ unsigned long flags;
+ struct cmd_header *cmd;
+ uint16_t cmdsize;
+ uint16_t command;
+ int timeo = 5 * HZ;
+ int ret;
+
+ cmd = cmdnode->cmdbuf;
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->cur_cmd = cmdnode;
+ cmdsize = le16_to_cpu(cmd->size);
+ command = le16_to_cpu(cmd->command);
+ ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ if (ret)
+ /* Let the timer kick in and retry, and potentially reset
+ the whole thing if the condition persists */
+ timeo = HZ;
+
+ /* Setup the timer after transmit command */
+ mod_timer(&priv->command_timer, jiffies + timeo);
+}
+
+/**
+ * This function inserts command node to cmdfreeq
+ * after cleans it. Requires priv->driver_lock held.
+ */
+static void __lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv,
+ struct cmd_ctrl_node *cmdnode)
+{
+ if (!cmdnode)
+ return;
+
+ cmdnode->callback = NULL;
+ cmdnode->callback_arg = 0;
+
+ memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE);
+
+ list_add_tail(&cmdnode->list, &priv->cmdfreeq);
+}
+
+static void lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv,
+ struct cmd_ctrl_node *ptempcmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ __lbtf_cleanup_and_insert_cmd(priv, ptempcmd);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+}
+
+void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd,
+ int result)
+{
+ cmd->result = result;
+ cmd->cmdwaitqwoken = 1;
+ wake_up_interruptible(&cmd->cmdwait_q);
+
+ if (!cmd->callback)
+ __lbtf_cleanup_and_insert_cmd(priv, cmd);
+ priv->cur_cmd = NULL;
+}
+
+int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv)
+{
+ struct cmd_ds_mac_multicast_addr cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+
+ cmd.nr_of_adrs = cpu_to_le16((u16) priv->nr_of_multicastmacaddr);
+ memcpy(cmd.maclist, priv->multicastlist,
+ priv->nr_of_multicastmacaddr * ETH_ALEN);
+
+ lbtf_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &cmd.hdr, sizeof(cmd));
+ return 0;
+}
+
+void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode)
+{
+ struct cmd_ds_set_mode cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.mode = cpu_to_le16(mode);
+ lbtf_cmd_async(priv, CMD_802_11_SET_MODE, &cmd.hdr, sizeof(cmd));
+}
+
+void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid)
+{
+ struct cmd_ds_set_bssid cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.activate = activate ? 1 : 0;
+ if (activate)
+ memcpy(cmd.bssid, bssid, ETH_ALEN);
+
+ lbtf_cmd_async(priv, CMD_802_11_SET_BSSID, &cmd.hdr, sizeof(cmd));
+}
+
+int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr)
+{
+ struct cmd_ds_802_11_mac_address cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+
+ memcpy(cmd.macadd, mac_addr, ETH_ALEN);
+
+ lbtf_cmd_async(priv, CMD_802_11_MAC_ADDRESS, &cmd.hdr, sizeof(cmd));
+ return 0;
+}
+
+int lbtf_set_radio_control(struct lbtf_private *priv)
+{
+ int ret = 0;
+ struct cmd_ds_802_11_radio_control cmd;
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+
+ switch (priv->preamble) {
+ case CMD_TYPE_SHORT_PREAMBLE:
+ cmd.control = cpu_to_le16(SET_SHORT_PREAMBLE);
+ break;
+
+ case CMD_TYPE_LONG_PREAMBLE:
+ cmd.control = cpu_to_le16(SET_LONG_PREAMBLE);
+ break;
+
+ case CMD_TYPE_AUTO_PREAMBLE:
+ default:
+ cmd.control = cpu_to_le16(SET_AUTO_PREAMBLE);
+ break;
+ }
+
+ if (priv->radioon)
+ cmd.control |= cpu_to_le16(TURN_ON_RF);
+ else
+ cmd.control &= cpu_to_le16(~TURN_ON_RF);
+
+ ret = lbtf_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd);
+ return ret;
+}
+
+void lbtf_set_mac_control(struct lbtf_private *priv)
+{
+ struct cmd_ds_mac_control cmd;
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(priv->mac_control);
+ cmd.reserved = 0;
+
+ lbtf_cmd_async(priv, CMD_MAC_CONTROL,
+ &cmd.hdr, sizeof(cmd));
+}
+
+/**
+ * lbtf_allocate_cmd_buffer - Allocates cmd buffer, links it to free cmd queue
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: 0 on success.
+ */
+int lbtf_allocate_cmd_buffer(struct lbtf_private *priv)
+{
+ u32 bufsize;
+ u32 i;
+ struct cmd_ctrl_node *cmdarray;
+
+ /* Allocate and initialize the command array */
+ bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS;
+ cmdarray = kzalloc(bufsize, GFP_KERNEL);
+ if (!cmdarray)
+ return -1;
+ priv->cmd_array = cmdarray;
+
+ /* Allocate and initialize each command buffer in the command array */
+ for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+ cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL);
+ if (!cmdarray[i].cmdbuf)
+ return -1;
+ }
+
+ for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+ init_waitqueue_head(&cmdarray[i].cmdwait_q);
+ lbtf_cleanup_and_insert_cmd(priv, &cmdarray[i]);
+ }
+ return 0;
+}
+
+/**
+ * lbtf_free_cmd_buffer - Frees the cmd buffer.
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: 0
+ */
+int lbtf_free_cmd_buffer(struct lbtf_private *priv)
+{
+ struct cmd_ctrl_node *cmdarray;
+ unsigned int i;
+
+ /* need to check if cmd array is allocated or not */
+ if (priv->cmd_array == NULL)
+ return 0;
+
+ cmdarray = priv->cmd_array;
+
+ /* Release shared memory buffers */
+ for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+ kfree(cmdarray[i].cmdbuf);
+ cmdarray[i].cmdbuf = NULL;
+ }
+
+ /* Release cmd_ctrl_node */
+ kfree(priv->cmd_array);
+ priv->cmd_array = NULL;
+
+ return 0;
+}
+
+/**
+ * lbtf_get_cmd_ctrl_node - Gets free cmd node from free cmd queue.
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: pointer to a struct cmd_ctrl_node or NULL if none available.
+ */
+static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv)
+{
+ struct cmd_ctrl_node *tempnode;
+ unsigned long flags;
+
+ if (!priv)
+ return NULL;
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ if (!list_empty(&priv->cmdfreeq)) {
+ tempnode = list_first_entry(&priv->cmdfreeq,
+ struct cmd_ctrl_node, list);
+ list_del(&tempnode->list);
+ } else
+ tempnode = NULL;
+
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ return tempnode;
+}
+
+/**
+ * lbtf_execute_next_command: execute next command in cmd pending queue.
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: 0 on success.
+ */
+int lbtf_execute_next_command(struct lbtf_private *priv)
+{
+ struct cmd_ctrl_node *cmdnode = NULL;
+ struct cmd_header *cmd;
+ unsigned long flags;
+
+ /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the
+ * only caller to us is lbtf_thread() and we get even when a
+ * data packet is received */
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ if (priv->cur_cmd) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ return -1;
+ }
+
+ if (!list_empty(&priv->cmdpendingq)) {
+ cmdnode = list_first_entry(&priv->cmdpendingq,
+ struct cmd_ctrl_node, list);
+ }
+
+ if (cmdnode) {
+ cmd = cmdnode->cmdbuf;
+
+ list_del(&cmdnode->list);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ lbtf_submit_command(priv, cmdnode);
+ } else
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ return 0;
+}
+
+static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv,
+ uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
+ int (*callback)(struct lbtf_private *, unsigned long,
+ struct cmd_header *),
+ unsigned long callback_arg)
+{
+ struct cmd_ctrl_node *cmdnode;
+
+ if (priv->surpriseremoved)
+ return ERR_PTR(-ENOENT);
+
+ cmdnode = lbtf_get_cmd_ctrl_node(priv);
+ if (cmdnode == NULL) {
+ /* Wake up main thread to execute next command */
+ queue_work(lbtf_wq, &priv->cmd_work);
+ return ERR_PTR(-ENOBUFS);
+ }
+
+ cmdnode->callback = callback;
+ cmdnode->callback_arg = callback_arg;
+
+ /* Copy the incoming command to the buffer */
+ memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
+
+ /* Set sequence number, clean result, move to buffer */
+ priv->seqnum++;
+ cmdnode->cmdbuf->command = cpu_to_le16(command);
+ cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size);
+ cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum);
+ cmdnode->cmdbuf->result = 0;
+ cmdnode->cmdwaitqwoken = 0;
+ lbtf_queue_cmd(priv, cmdnode);
+ queue_work(lbtf_wq, &priv->cmd_work);
+
+ return cmdnode;
+}
+
+void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command,
+ struct cmd_header *in_cmd, int in_cmd_size)
+{
+ __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, NULL, 0);
+}
+
+int __lbtf_cmd(struct lbtf_private *priv, uint16_t command,
+ struct cmd_header *in_cmd, int in_cmd_size,
+ int (*callback)(struct lbtf_private *,
+ unsigned long, struct cmd_header *),
+ unsigned long callback_arg)
+{
+ struct cmd_ctrl_node *cmdnode;
+ unsigned long flags;
+ int ret = 0;
+
+ cmdnode = __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size,
+ callback, callback_arg);
+ if (IS_ERR(cmdnode))
+ return PTR_ERR(cmdnode);
+
+ might_sleep();
+ ret = wait_event_interruptible(cmdnode->cmdwait_q,
+ cmdnode->cmdwaitqwoken);
+ if (ret) {
+ printk(KERN_DEBUG
+ "libertastf: command 0x%04x interrupted by signal",
+ command);
+ return ret;
+ }
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ ret = cmdnode->result;
+ if (ret)
+ printk(KERN_DEBUG "libertastf: command 0x%04x failed: %d\n",
+ command, ret);
+
+ __lbtf_cleanup_and_insert_cmd(priv, cmdnode);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(__lbtf_cmd);
+
+/* Call holding driver_lock */
+void lbtf_cmd_response_rx(struct lbtf_private *priv)
+{
+ priv->cmd_response_rxed = 1;
+ queue_work(lbtf_wq, &priv->cmd_work);
+}
+EXPORT_SYMBOL_GPL(lbtf_cmd_response_rx);
+
+int lbtf_process_rx_command(struct lbtf_private *priv)
+{
+ uint16_t respcmd, curcmd;
+ struct cmd_header *resp;
+ int ret = 0;
+ unsigned long flags;
+ uint16_t result;
+
+ mutex_lock(&priv->lock);
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ if (!priv->cur_cmd) {
+ ret = -1;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ goto done;
+ }
+
+ resp = (void *)priv->cmd_resp_buff;
+ curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command);
+ respcmd = le16_to_cpu(resp->command);
+ result = le16_to_cpu(resp->result);
+
+ if (net_ratelimit())
+ printk(KERN_DEBUG "libertastf: cmd response 0x%04x, seq %d, size %d\n",
+ respcmd, le16_to_cpu(resp->seqnum),
+ le16_to_cpu(resp->size));
+
+ if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ ret = -1;
+ goto done;
+ }
+ if (respcmd != CMD_RET(curcmd)) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ ret = -1;
+ goto done;
+ }
+
+ if (resp->result == cpu_to_le16(0x0004)) {
+ /* 0x0004 means -EAGAIN. Drop the response, let it time out
+ and be resubmitted */
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ ret = -1;
+ goto done;
+ }
+
+ /* Now we got response from FW, cancel the command timer */
+ del_timer(&priv->command_timer);
+ priv->cmd_timed_out = 0;
+ if (priv->nr_retries)
+ priv->nr_retries = 0;
+
+ /* If the command is not successful, cleanup and return failure */
+ if ((result != 0 || !(respcmd & 0x8000))) {
+ /*
+ * Handling errors here
+ */
+ switch (respcmd) {
+ case CMD_RET(CMD_GET_HW_SPEC):
+ case CMD_RET(CMD_802_11_RESET):
+ printk(KERN_DEBUG "libertastf: reset failed\n");
+ break;
+
+ }
+ lbtf_complete_command(priv, priv->cur_cmd, result);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ ret = -1;
+ goto done;
+ }
+
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ if (priv->cur_cmd && priv->cur_cmd->callback) {
+ ret = priv->cur_cmd->callback(priv, priv->cur_cmd->callback_arg,
+ resp);
+ }
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ if (priv->cur_cmd) {
+ /* Clean up and Put current command back to cmdfreeq */
+ lbtf_complete_command(priv, priv->cur_cmd, result);
+ }
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+done:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (C) 2008, cozybit Inc.
+ * Copyright (C) 2003-2006, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#define DRV_NAME "lbtf_usb"
+
+#include "libertas_tf.h"
+#include "if_usb.h"
+
+#define MESSAGE_HEADER_LEN 4
+
+static char *lbtf_fw_name = "lbtf_usb.bin";
+module_param_named(fw_name, lbtf_fw_name, charp, 0644);
+
+static struct usb_device_id if_usb_table[] = {
+ /* Enter the device signature inside */
+ { USB_DEVICE(0x1286, 0x2001) },
+ { USB_DEVICE(0x05a3, 0x8388) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, if_usb_table);
+
+static void if_usb_receive(struct urb *urb);
+static void if_usb_receive_fwload(struct urb *urb);
+static int if_usb_prog_firmware(struct if_usb_card *cardp);
+static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type,
+ uint8_t *payload, uint16_t nb);
+static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
+ uint16_t nb, u8 data);
+static void if_usb_free(struct if_usb_card *cardp);
+static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
+static int if_usb_reset_device(struct if_usb_card *cardp);
+
+/**
+ * if_usb_wrike_bulk_callback - call back to handle URB status
+ *
+ * @param urb pointer to urb structure
+ */
+static void if_usb_write_bulk_callback(struct urb *urb)
+{
+ if (urb->status != 0)
+ printk(KERN_INFO "libertastf: URB in failure status: %d\n",
+ urb->status);
+}
+
+/**
+ * if_usb_free - free tx/rx urb, skb and rx buffer
+ *
+ * @param cardp pointer if_usb_card
+ */
+static void if_usb_free(struct if_usb_card *cardp)
+{
+ /* Unlink tx & rx urb */
+ usb_kill_urb(cardp->tx_urb);
+ usb_kill_urb(cardp->rx_urb);
+ usb_kill_urb(cardp->cmd_urb);
+
+ usb_free_urb(cardp->tx_urb);
+ cardp->tx_urb = NULL;
+
+ usb_free_urb(cardp->rx_urb);
+ cardp->rx_urb = NULL;
+
+ usb_free_urb(cardp->cmd_urb);
+ cardp->cmd_urb = NULL;
+
+ kfree(cardp->ep_out_buf);
+ cardp->ep_out_buf = NULL;
+}
+
+static void if_usb_setup_firmware(struct lbtf_private *priv)
+{
+ struct if_usb_card *cardp = priv->card;
+ struct cmd_ds_set_boot2_ver b2_cmd;
+
+ if_usb_submit_rx_urb(cardp);
+ b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
+ b2_cmd.action = 0;
+ b2_cmd.version = cardp->boot2_version;
+
+ if (lbtf_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
+ printk(KERN_INFO "libertastf: setting boot2 version failed\n");
+}
+
+static void if_usb_fw_timeo(unsigned long priv)
+{
+ struct if_usb_card *cardp = (void *)priv;
+
+ if (!cardp->fwdnldover)
+ /* Download timed out */
+ cardp->priv->surpriseremoved = 1;
+ wake_up(&cardp->fw_wq);
+}
+
+/**
+ * if_usb_probe - sets the configuration values
+ *
+ * @ifnum interface number
+ * @id pointer to usb_device_id
+ *
+ * Returns: 0 on success, error code on failure
+ */
+static int if_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ struct lbtf_private *priv;
+ struct if_usb_card *cardp;
+ int i;
+
+ udev = interface_to_usbdev(intf);
+
+ cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
+ if (!cardp)
+ goto error;
+
+ setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
+ init_waitqueue_head(&cardp->fw_wq);
+
+ cardp->udev = udev;
+ iface_desc = intf->cur_altsetting;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (usb_endpoint_is_bulk_in(endpoint)) {
+ cardp->ep_in_size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ cardp->ep_in = usb_endpoint_num(endpoint);
+ } else if (usb_endpoint_is_bulk_out(endpoint)) {
+ cardp->ep_out_size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ cardp->ep_out = usb_endpoint_num(endpoint);
+ }
+ }
+ if (!cardp->ep_out_size || !cardp->ep_in_size)
+ /* Endpoints not found */
+ goto dealloc;
+
+ cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!cardp->rx_urb)
+ goto dealloc;
+
+ cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!cardp->tx_urb)
+ goto dealloc;
+
+ cardp->cmd_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!cardp->cmd_urb)
+ goto dealloc;
+
+ cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE,
+ GFP_KERNEL);
+ if (!cardp->ep_out_buf)
+ goto dealloc;
+
+ priv = lbtf_add_card(cardp, &udev->dev);
+ if (!priv)
+ goto dealloc;
+
+ cardp->priv = priv;
+
+ priv->hw_host_to_card = if_usb_host_to_card;
+ priv->hw_prog_firmware = if_usb_prog_firmware;
+ priv->hw_reset_device = if_usb_reset_device;
+ cardp->boot2_version = udev->descriptor.bcdDevice;
+
+ usb_get_dev(udev);
+ usb_set_intfdata(intf, cardp);
+
+ return 0;
+
+dealloc:
+ if_usb_free(cardp);
+error:
+ return -ENOMEM;
+}
+
+/**
+ * if_usb_disconnect - free resource and cleanup
+ *
+ * @intf USB interface structure
+ */
+static void if_usb_disconnect(struct usb_interface *intf)
+{
+ struct if_usb_card *cardp = usb_get_intfdata(intf);
+ struct lbtf_private *priv = (struct lbtf_private *) cardp->priv;
+
+ if_usb_reset_device(cardp);
+
+ if (priv)
+ lbtf_remove_card(priv);
+
+ /* Unlink and free urb */
+ if_usb_free(cardp);
+
+ usb_set_intfdata(intf, NULL);
+ usb_put_dev(interface_to_usbdev(intf));
+}
+
+/**
+ * if_usb_send_fw_pkt - This function downloads the FW
+ *
+ * @priv pointer to struct lbtf_private
+ *
+ * Returns: 0
+ */
+static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
+{
+ struct fwdata *fwdata = cardp->ep_out_buf;
+ u8 *firmware = (u8 *) cardp->fw->data;
+
+ /* If we got a CRC failure on the last block, back
+ up and retry it */
+ if (!cardp->CRC_OK) {
+ cardp->totalbytes = cardp->fwlastblksent;
+ cardp->fwseqnum--;
+ }
+
+ /* struct fwdata (which we sent to the card) has an
+ extra __le32 field in between the header and the data,
+ which is not in the struct fwheader in the actual
+ firmware binary. Insert the seqnum in the middle... */
+ memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
+ sizeof(struct fwheader));
+
+ cardp->fwlastblksent = cardp->totalbytes;
+ cardp->totalbytes += sizeof(struct fwheader);
+
+ memcpy(fwdata->data, &firmware[cardp->totalbytes],
+ le32_to_cpu(fwdata->hdr.datalength));
+
+ fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
+ cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
+
+ usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
+ le32_to_cpu(fwdata->hdr.datalength), 0);
+
+ if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK))
+ /* Host has finished FW downloading
+ * Donwloading FW JUMP BLOCK
+ */
+ cardp->fwfinalblk = 1;
+
+ return 0;
+}
+
+static int if_usb_reset_device(struct if_usb_card *cardp)
+{
+ struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4;
+ int ret;
+
+ *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
+
+ cmd->hdr.command = cpu_to_le16(CMD_802_11_RESET);
+ cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset));
+ cmd->hdr.result = cpu_to_le16(0);
+ cmd->hdr.seqnum = cpu_to_le16(0x5a5a);
+ cmd->action = cpu_to_le16(CMD_ACT_HALT);
+ usb_tx_block(cardp, cardp->ep_out_buf,
+ 4 + sizeof(struct cmd_ds_802_11_reset), 0);
+
+ msleep(100);
+ ret = usb_reset_device(cardp->udev);
+ msleep(100);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(if_usb_reset_device);
+
+/**
+ * usb_tx_block - transfer data to the device
+ *
+ * @priv pointer to struct lbtf_private
+ * @payload pointer to payload data
+ * @nb data length
+ * @data non-zero for data, zero for commands
+ *
+ * Returns: 0 on success, nonzero otherwise.
+ */
+static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
+ uint16_t nb, u8 data)
+{
+ struct urb *urb;
+
+ /* check if device is removed */
+ if (cardp->priv->surpriseremoved)
+ return -1;
+
+ if (data)
+ urb = cardp->tx_urb;
+ else
+ urb = cardp->cmd_urb;
+
+ usb_fill_bulk_urb(urb, cardp->udev,
+ usb_sndbulkpipe(cardp->udev,
+ cardp->ep_out),
+ payload, nb, if_usb_write_bulk_callback, cardp);
+
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ if (usb_submit_urb(urb, GFP_ATOMIC))
+ return -1;
+ return 0;
+}
+
+static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
+ void (*callbackfn)(struct urb *urb))
+{
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+ if (!skb)
+ return -1;
+
+ cardp->rx_skb = skb;
+
+ /* Fill the receive configuration URB and initialise the Rx call back */
+ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
+ usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
+ (void *) (skb->tail),
+ MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp);
+
+ cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
+
+ if (usb_submit_urb(cardp->rx_urb, GFP_ATOMIC)) {
+ kfree_skb(skb);
+ cardp->rx_skb = NULL;
+ return -1;
+ } else
+ return 0;
+}
+
+static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
+{
+ return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
+}
+
+static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
+{
+ return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
+}
+
+static void if_usb_receive_fwload(struct urb *urb)
+{
+ struct if_usb_card *cardp = urb->context;
+ struct sk_buff *skb = cardp->rx_skb;
+ struct fwsyncheader *syncfwheader;
+ struct bootcmdresp bcmdresp;
+
+ if (urb->status) {
+ kfree_skb(skb);
+ return;
+ }
+
+ if (cardp->fwdnldover) {
+ __le32 *tmp = (__le32 *)(skb->data);
+
+ if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
+ tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY))
+ /* Firmware ready event received */
+ wake_up(&cardp->fw_wq);
+ else
+ if_usb_submit_rx_urb_fwload(cardp);
+ kfree_skb(skb);
+ return;
+ }
+ if (cardp->bootcmdresp <= 0) {
+ memcpy(&bcmdresp, skb->data, sizeof(bcmdresp));
+
+ if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
+ kfree_skb(skb);
+ if_usb_submit_rx_urb_fwload(cardp);
+ cardp->bootcmdresp = 1;
+ /* Received valid boot command response */
+ return;
+ }
+ if (bcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
+ if (bcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
+ bcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
+ bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION))
+ cardp->bootcmdresp = -1;
+ } else if (bcmdresp.cmd == BOOT_CMD_FW_BY_USB &&
+ bcmdresp.result == BOOT_CMD_RESP_OK)
+ cardp->bootcmdresp = 1;
+
+ kfree_skb(skb);
+ if_usb_submit_rx_urb_fwload(cardp);
+ return;
+ }
+
+ syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC);
+ if (!syncfwheader) {
+ kfree_skb(skb);
+ return;
+ }
+
+ memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader));
+
+ if (!syncfwheader->cmd)
+ cardp->CRC_OK = 1;
+ else
+ cardp->CRC_OK = 0;
+ kfree_skb(skb);
+
+ /* reschedule timer for 200ms hence */
+ mod_timer(&cardp->fw_timeout, jiffies + (HZ/5));
+
+ if (cardp->fwfinalblk) {
+ cardp->fwdnldover = 1;
+ goto exit;
+ }
+
+ if_usb_send_fw_pkt(cardp);
+
+ exit:
+ if_usb_submit_rx_urb_fwload(cardp);
+
+ kfree(syncfwheader);
+
+ return;
+}
+
+#define MRVDRV_MIN_PKT_LEN 30
+
+static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
+ struct if_usb_card *cardp,
+ struct lbtf_private *priv)
+{
+ if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
+ || recvlength < MRVDRV_MIN_PKT_LEN) {
+ kfree_skb(skb);
+ return;
+ }
+
+ skb_put(skb, recvlength);
+ skb_pull(skb, MESSAGE_HEADER_LEN);
+ lbtf_rx(priv, skb);
+}
+
+static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
+ struct sk_buff *skb,
+ struct if_usb_card *cardp,
+ struct lbtf_private *priv)
+{
+ if (recvlength > LBS_CMD_BUFFER_SIZE) {
+ kfree_skb(skb);
+ return;
+ }
+
+ if (!in_interrupt())
+ BUG();
+
+ spin_lock(&priv->driver_lock);
+ memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN,
+ recvlength - MESSAGE_HEADER_LEN);
+ kfree_skb(skb);
+ lbtf_cmd_response_rx(priv);
+ spin_unlock(&priv->driver_lock);
+}
+
+/**
+ * if_usb_receive - read data received from the device.
+ *
+ * @urb pointer to struct urb
+ */
+static void if_usb_receive(struct urb *urb)
+{
+ struct if_usb_card *cardp = urb->context;
+ struct sk_buff *skb = cardp->rx_skb;
+ struct lbtf_private *priv = cardp->priv;
+ int recvlength = urb->actual_length;
+ uint8_t *recvbuff = NULL;
+ uint32_t recvtype = 0;
+ __le32 *pkt = (__le32 *) skb->data;
+
+ if (recvlength) {
+ if (urb->status) {
+ kfree_skb(skb);
+ goto setup_for_next;
+ }
+
+ recvbuff = skb->data;
+ recvtype = le32_to_cpu(pkt[0]);
+ } else if (urb->status) {
+ kfree_skb(skb);
+ return;
+ }
+
+ switch (recvtype) {
+ case CMD_TYPE_DATA:
+ process_cmdtypedata(recvlength, skb, cardp, priv);
+ break;
+
+ case CMD_TYPE_REQUEST:
+ process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
+ break;
+
+ case CMD_TYPE_INDICATION:
+ {
+ /* Event cause handling */
+ u32 event_cause = le32_to_cpu(pkt[1]);
+
+ /* Icky undocumented magic special case */
+ if (event_cause & 0xffff0000) {
+ u16 tmp;
+ u8 retrycnt;
+ u8 failure;
+
+ tmp = event_cause >> 16;
+ retrycnt = tmp & 0x00ff;
+ failure = (tmp & 0xff00) >> 8;
+ lbtf_send_tx_feedback(priv, retrycnt, failure);
+ } else if (event_cause == LBTF_EVENT_BCN_SENT)
+ lbtf_bcn_sent(priv);
+ else
+ printk(KERN_DEBUG
+ "Unsupported notification %d received\n",
+ event_cause);
+ kfree_skb(skb);
+ break;
+ }
+ default:
+ printk(KERN_DEBUG "libertastf: unknown command type 0x%X\n",
+ recvtype);
+ kfree_skb(skb);
+ break;
+ }
+
+setup_for_next:
+ if_usb_submit_rx_urb(cardp);
+}
+
+/**
+ * if_usb_host_to_card - Download data to the device
+ *
+ * @priv pointer to struct lbtf_private structure
+ * @type type of data
+ * @buf pointer to data buffer
+ * @len number of bytes
+ *
+ * Returns: 0 on success, nonzero otherwise
+ */
+static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type,
+ uint8_t *payload, uint16_t nb)
+{
+ struct if_usb_card *cardp = priv->card;
+ u8 data = 0;
+
+ if (type == MVMS_CMD) {
+ *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
+ } else {
+ *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
+ data = 1;
+ }
+
+ memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
+
+ return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN,
+ data);
+}
+
+/**
+ * if_usb_issue_boot_command - Issue boot command to Boot2.
+ *
+ * @ivalue 1 boots from FW by USB-Download, 2 boots from FW in EEPROM.
+ *
+ * Returns: 0
+ */
+static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
+{
+ struct bootcmd *bootcmd = cardp->ep_out_buf;
+
+ /* Prepare command */
+ bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
+ bootcmd->cmd = ivalue;
+ memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
+
+ /* Issue command */
+ usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd), 0);
+
+ return 0;
+}
+
+
+/**
+ * check_fwfile_format - Check the validity of Boot2/FW image.
+ *
+ * @data pointer to image
+ * @totlen image length
+ *
+ * Returns: 0 if the image is valid, nonzero otherwise.
+ */
+static int check_fwfile_format(const u8 *data, u32 totlen)
+{
+ u32 bincmd, exit;
+ u32 blksize, offset, len;
+ int ret;
+
+ ret = 1;
+ exit = len = 0;
+
+ do {
+ struct fwheader *fwh = (void *) data;
+
+ bincmd = le32_to_cpu(fwh->dnldcmd);
+ blksize = le32_to_cpu(fwh->datalength);
+ switch (bincmd) {
+ case FW_HAS_DATA_TO_RECV:
+ offset = sizeof(struct fwheader) + blksize;
+ data += offset;
+ len += offset;
+ if (len >= totlen)
+ exit = 1;
+ break;
+ case FW_HAS_LAST_BLOCK:
+ exit = 1;
+ ret = 0;
+ break;
+ default:
+ exit = 1;
+ break;
+ }
+ } while (!exit);
+
+ if (ret)
+ printk(KERN_INFO
+ "libertastf: firmware file format check failed\n");
+ return ret;
+}
+
+
+static int if_usb_prog_firmware(struct if_usb_card *cardp)
+{
+ int i = 0;
+ static int reset_count = 10;
+ int ret = 0;
+
+ ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev);
+ if (ret < 0) {
+ printk(KERN_INFO "libertastf: firmware %s not found\n",
+ lbtf_fw_name);
+ goto done;
+ }
+
+ if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
+ goto release_fw;
+
+restart:
+ if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
+ ret = -1;
+ goto release_fw;
+ }
+
+ cardp->bootcmdresp = 0;
+ do {
+ int j = 0;
+ i++;
+ /* Issue Boot command = 1, Boot from Download-FW */
+ if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
+ /* wait for command response */
+ do {
+ j++;
+ msleep_interruptible(100);
+ } while (cardp->bootcmdresp == 0 && j < 10);
+ } while (cardp->bootcmdresp == 0 && i < 5);
+
+ if (cardp->bootcmdresp <= 0) {
+ if (--reset_count >= 0) {
+ if_usb_reset_device(cardp);
+ goto restart;
+ }
+ return -1;
+ }
+
+ i = 0;
+
+ cardp->totalbytes = 0;
+ cardp->fwlastblksent = 0;
+ cardp->CRC_OK = 1;
+ cardp->fwdnldover = 0;
+ cardp->fwseqnum = -1;
+ cardp->totalbytes = 0;
+ cardp->fwfinalblk = 0;
+
+ /* Send the first firmware packet... */
+ if_usb_send_fw_pkt(cardp);
+
+ /* ... and wait for the process to complete */
+ wait_event_interruptible(cardp->fw_wq, cardp->priv->surpriseremoved ||
+ cardp->fwdnldover);
+
+ del_timer_sync(&cardp->fw_timeout);
+ usb_kill_urb(cardp->rx_urb);
+
+ if (!cardp->fwdnldover) {
+ printk(KERN_INFO "libertastf: failed to load fw,"
+ " resetting device!\n");
+ if (--reset_count >= 0) {
+ if_usb_reset_device(cardp);
+ goto restart;
+ }
+
+ printk(KERN_INFO "libertastf: fw download failure\n");
+ ret = -1;
+ goto release_fw;
+ }
+
+ cardp->priv->fw_ready = 1;
+
+ release_fw:
+ release_firmware(cardp->fw);
+ cardp->fw = NULL;
+
+ if_usb_setup_firmware(cardp->priv);
+
+ done:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(if_usb_prog_firmware);
+
+
+#define if_usb_suspend NULL
+#define if_usb_resume NULL
+
+static struct usb_driver if_usb_driver = {
+ .name = DRV_NAME,
+ .probe = if_usb_probe,
+ .disconnect = if_usb_disconnect,
+ .id_table = if_usb_table,
+ .suspend = if_usb_suspend,
+ .resume = if_usb_resume,
+};
+
+static int __init if_usb_init_module(void)
+{
+ int ret = 0;
+
+ ret = usb_register(&if_usb_driver);
+ return ret;
+}
+
+static void __exit if_usb_exit_module(void)
+{
+ usb_deregister(&if_usb_driver);
+}
+
+module_init(if_usb_init_module);
+module_exit(if_usb_exit_module);
+
+MODULE_DESCRIPTION("8388 USB WLAN Thinfirm Driver");
+MODULE_AUTHOR("Cozybit Inc.");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2008, cozybit Inc.
+ * Copyright (C) 2003-2006, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/wait.h>
+#include <linux/timer.h>
+
+struct lbtf_private;
+
+/**
+ * This file contains definition for USB interface.
+ */
+#define CMD_TYPE_REQUEST 0xF00DFACE
+#define CMD_TYPE_DATA 0xBEADC0DE
+#define CMD_TYPE_INDICATION 0xBEEFFACE
+
+#define BOOT_CMD_FW_BY_USB 0x01
+#define BOOT_CMD_FW_IN_EEPROM 0x02
+#define BOOT_CMD_UPDATE_BOOT2 0x03
+#define BOOT_CMD_UPDATE_FW 0x04
+#define BOOT_CMD_MAGIC_NUMBER 0x4C56524D /* LVRM */
+
+struct bootcmd {
+ __le32 magic;
+ uint8_t cmd;
+ uint8_t pad[11];
+};
+
+#define BOOT_CMD_RESP_OK 0x0001
+#define BOOT_CMD_RESP_FAIL 0x0000
+
+struct bootcmdresp {
+ __le32 magic;
+ uint8_t cmd;
+ uint8_t result;
+ uint8_t pad[2];
+};
+
+/** USB card description structure*/
+struct if_usb_card {
+ struct usb_device *udev;
+ struct urb *rx_urb, *tx_urb, *cmd_urb;
+ struct lbtf_private *priv;
+
+ struct sk_buff *rx_skb;
+
+ uint8_t ep_in;
+ uint8_t ep_out;
+
+ int8_t bootcmdresp;
+
+ int ep_in_size;
+
+ void *ep_out_buf;
+ int ep_out_size;
+
+ const struct firmware *fw;
+ struct timer_list fw_timeout;
+ wait_queue_head_t fw_wq;
+ uint32_t fwseqnum;
+ uint32_t totalbytes;
+ uint32_t fwlastblksent;
+ uint8_t CRC_OK;
+ uint8_t fwdnldover;
+ uint8_t fwfinalblk;
+
+ __le16 boot2_version;
+};
+
+/** fwheader */
+struct fwheader {
+ __le32 dnldcmd;
+ __le32 baseaddr;
+ __le32 datalength;
+ __le32 CRC;
+};
+
+#define FW_MAX_DATA_BLK_SIZE 600
+/** FWData */
+struct fwdata {
+ struct fwheader hdr;
+ __le32 seqnum;
+ uint8_t data[0];
+};
+
+/** fwsyncheader */
+struct fwsyncheader {
+ __le32 cmd;
+ __le32 seqnum;
+};
+
+#define FW_HAS_DATA_TO_RECV 0x00000001
+#define FW_HAS_LAST_BLOCK 0x00000004
--- /dev/null
+/*
+ * Copyright (C) 2008, cozybit Inc.
+ * Copyright (C) 2007, Red Hat, Inc.
+ * Copyright (C) 2003-2006, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/kthread.h>
+#include <net/mac80211.h>
+
+#ifndef DRV_NAME
+#define DRV_NAME "libertas_tf"
+#endif
+
+#define MRVL_DEFAULT_RETRIES 9
+#define MRVL_PER_PACKET_RATE 0x10
+#define MRVL_MAX_BCN_SIZE 440
+#define CMD_OPTION_WAITFORRSP 0x0002
+
+/* Return command are almost always the same as the host command, but with
+ * bit 15 set high. There are a few exceptions, though...
+ */
+#define CMD_RET(cmd) (0x8000 | cmd)
+
+/* Command codes */
+#define CMD_GET_HW_SPEC 0x0003
+#define CMD_802_11_RESET 0x0005
+#define CMD_MAC_MULTICAST_ADR 0x0010
+#define CMD_802_11_RADIO_CONTROL 0x001c
+#define CMD_802_11_RF_CHANNEL 0x001d
+#define CMD_802_11_RF_TX_POWER 0x001e
+#define CMD_MAC_CONTROL 0x0028
+#define CMD_802_11_MAC_ADDRESS 0x004d
+#define CMD_SET_BOOT2_VER 0x00a5
+#define CMD_802_11_BEACON_CTRL 0x00b0
+#define CMD_802_11_BEACON_SET 0x00cb
+#define CMD_802_11_SET_MODE 0x00cc
+#define CMD_802_11_SET_BSSID 0x00cd
+
+#define CMD_ACT_GET 0x0000
+#define CMD_ACT_SET 0x0001
+
+/* Define action or option for CMD_802_11_RESET */
+#define CMD_ACT_HALT 0x0003
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON 0x0001
+#define CMD_ACT_MAC_TX_ON 0x0002
+#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
+
+/* Define action or option for CMD_802_11_RADIO_CONTROL */
+#define CMD_TYPE_AUTO_PREAMBLE 0x0001
+#define CMD_TYPE_SHORT_PREAMBLE 0x0002
+#define CMD_TYPE_LONG_PREAMBLE 0x0003
+
+#define TURN_ON_RF 0x01
+#define RADIO_ON 0x01
+#define RADIO_OFF 0x00
+
+#define SET_AUTO_PREAMBLE 0x05
+#define SET_SHORT_PREAMBLE 0x03
+#define SET_LONG_PREAMBLE 0x01
+
+/* Define action or option for CMD_802_11_RF_CHANNEL */
+#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
+
+/* Codes for CMD_802_11_SET_MODE */
+enum lbtf_mode {
+ LBTF_PASSIVE_MODE,
+ LBTF_STA_MODE,
+ LBTF_AP_MODE,
+};
+
+/** Card Event definition */
+#define MACREG_INT_CODE_FIRMWARE_READY 48
+/** Buffer Constants */
+
+/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
+* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
+* driver has more local TxPDs. Each TxPD on the host memory is associated
+* with a Tx control node. The driver maintains 8 RxPD descriptors for
+* station firmware to store Rx packet information.
+*
+* Current version of MAC has a 32x6 multicast address buffer.
+*
+* 802.11b can have up to 14 channels, the driver keeps the
+* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
+*/
+
+#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
+#define LBS_NUM_CMD_BUFFERS 10
+#define LBS_CMD_BUFFER_SIZE (2 * 1024)
+#define MRVDRV_MAX_CHANNEL_SIZE 14
+#define MRVDRV_SNAP_HEADER_LEN 8
+
+#define LBS_UPLD_SIZE 2312
+#define DEV_NAME_LEN 32
+
+/** Misc constants */
+/* This section defines 802.11 specific contants */
+
+#define MRVDRV_MAX_REGION_CODE 6
+/**
+ * the table to keep region code
+ */
+#define LBTF_REGDOMAIN_US 0x10
+#define LBTF_REGDOMAIN_CA 0x20
+#define LBTF_REGDOMAIN_EU 0x30
+#define LBTF_REGDOMAIN_SP 0x31
+#define LBTF_REGDOMAIN_FR 0x32
+#define LBTF_REGDOMAIN_JP 0x40
+
+#define SBI_EVENT_CAUSE_SHIFT 3
+
+/** RxPD status */
+
+#define MRVDRV_RXPD_STATUS_OK 0x0001
+
+
+/* This is for firmware specific length */
+#define EXTRA_LEN 36
+
+#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
+ (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
+
+#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
+ (ETH_FRAME_LEN + sizeof(struct rxpd) \
+ + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
+
+#define CMD_F_HOSTCMD (1 << 0)
+#define FW_CAPINFO_WPA (1 << 0)
+
+#define RF_ANTENNA_1 0x1
+#define RF_ANTENNA_2 0x2
+#define RF_ANTENNA_AUTO 0xFFFF
+
+#define LBTF_EVENT_BCN_SENT 55
+
+/** Global Variable Declaration */
+/** mv_ms_type */
+enum mv_ms_type {
+ MVMS_DAT = 0,
+ MVMS_CMD = 1,
+ MVMS_TXDONE = 2,
+ MVMS_EVENT
+};
+
+extern struct workqueue_struct *lbtf_wq;
+
+struct lbtf_private;
+
+struct lbtf_offset_value {
+ u32 offset;
+ u32 value;
+};
+
+struct channel_range {
+ u8 regdomain;
+ u8 start;
+ u8 end; /* exclusive (channel must be less than end) */
+};
+
+struct if_usb_card;
+
+/** Private structure for the MV device */
+struct lbtf_private {
+ void *card;
+ struct ieee80211_hw *hw;
+
+ /* Command response buffer */
+ u8 cmd_resp_buff[LBS_UPLD_SIZE];
+ /* Download sent:
+ bit0 1/0=data_sent/data_tx_done,
+ bit1 1/0=cmd_sent/cmd_tx_done,
+ all other bits reserved 0 */
+ struct ieee80211_vif *vif;
+
+ struct work_struct cmd_work;
+ struct work_struct tx_work;
+ /** Hardware access */
+ int (*hw_host_to_card) (struct lbtf_private *priv, u8 type, u8 *payload, u16 nb);
+ int (*hw_prog_firmware) (struct if_usb_card *cardp);
+ int (*hw_reset_device) (struct if_usb_card *cardp);
+
+
+ /** Wlan adapter data structure*/
+ /** STATUS variables */
+ u32 fwrelease;
+ u32 fwcapinfo;
+ /* protected with big lock */
+
+ struct mutex lock;
+
+ /** command-related variables */
+ u16 seqnum;
+ /* protected by big lock */
+
+ struct cmd_ctrl_node *cmd_array;
+ /** Current command */
+ struct cmd_ctrl_node *cur_cmd;
+ /** command Queues */
+ /** Free command buffers */
+ struct list_head cmdfreeq;
+ /** Pending command buffers */
+ struct list_head cmdpendingq;
+
+ /** spin locks */
+ spinlock_t driver_lock;
+
+ /** Timers */
+ struct timer_list command_timer;
+ int nr_retries;
+ int cmd_timed_out;
+
+ u8 cmd_response_rxed;
+
+ /** capability Info used in Association, start, join */
+ u16 capability;
+
+ /** MAC address information */
+ u8 current_addr[ETH_ALEN];
+ u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
+ u32 nr_of_multicastmacaddr;
+ int cur_freq;
+
+ struct sk_buff *skb_to_tx;
+ struct sk_buff *tx_skb;
+
+ /** NIC Operation characteristics */
+ u16 mac_control;
+ u16 regioncode;
+ struct channel_range range;
+
+ u8 radioon;
+ u32 preamble;
+
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_supported_band band;
+ struct lbtf_offset_value offsetvalue;
+
+ u8 fw_ready;
+ u8 surpriseremoved;
+ struct sk_buff_head bc_ps_buf;
+};
+
+/* 802.11-related definitions */
+
+/* TxPD descriptor */
+struct txpd {
+ /* Current Tx packet status */
+ __le32 tx_status;
+ /* Tx control */
+ __le32 tx_control;
+ __le32 tx_packet_location;
+ /* Tx packet length */
+ __le16 tx_packet_length;
+ /* First 2 byte of destination MAC address */
+ u8 tx_dest_addr_high[2];
+ /* Last 4 byte of destination MAC address */
+ u8 tx_dest_addr_low[4];
+ /* Pkt Priority */
+ u8 priority;
+ /* Pkt Trasnit Power control */
+ u8 powermgmt;
+ /* Time the packet has been queued in the driver (units = 2ms) */
+ u8 pktdelay_2ms;
+ /* reserved */
+ u8 reserved1;
+};
+
+/* RxPD Descriptor */
+struct rxpd {
+ /* Current Rx packet status */
+ __le16 status;
+
+ /* SNR */
+ u8 snr;
+
+ /* Tx control */
+ u8 rx_control;
+
+ /* Pkt length */
+ __le16 pkt_len;
+
+ /* Noise Floor */
+ u8 nf;
+
+ /* Rx Packet Rate */
+ u8 rx_rate;
+
+ /* Pkt addr */
+ __le32 pkt_ptr;
+
+ /* Next Rx RxPD addr */
+ __le32 next_rxpd_ptr;
+
+ /* Pkt Priority */
+ u8 priority;
+ u8 reserved[3];
+};
+
+struct cmd_header {
+ __le16 command;
+ __le16 size;
+ __le16 seqnum;
+ __le16 result;
+} __attribute__ ((packed));
+
+struct cmd_ctrl_node {
+ struct list_head list;
+ int result;
+ /* command response */
+ int (*callback)(struct lbtf_private *,
+ unsigned long, struct cmd_header *);
+ unsigned long callback_arg;
+ /* command data */
+ struct cmd_header *cmdbuf;
+ /* wait queue */
+ u16 cmdwaitqwoken;
+ wait_queue_head_t cmdwait_q;
+};
+
+/*
+ * Define data structure for CMD_GET_HW_SPEC
+ * This structure defines the response for the GET_HW_SPEC command
+ */
+struct cmd_ds_get_hw_spec {
+ struct cmd_header hdr;
+
+ /* HW Interface version number */
+ __le16 hwifversion;
+ /* HW version number */
+ __le16 version;
+ /* Max number of TxPD FW can handle */
+ __le16 nr_txpd;
+ /* Max no of Multicast address */
+ __le16 nr_mcast_adr;
+ /* MAC address */
+ u8 permanentaddr[6];
+
+ /* region Code */
+ __le16 regioncode;
+
+ /* Number of antenna used */
+ __le16 nr_antenna;
+
+ /* FW release number, example 0x01030304 = 2.3.4p1 */
+ __le32 fwrelease;
+
+ /* Base Address of TxPD queue */
+ __le32 wcb_base;
+ /* Read Pointer of RxPd queue */
+ __le32 rxpd_rdptr;
+
+ /* Write Pointer of RxPd queue */
+ __le32 rxpd_wrptr;
+
+ /*FW/HW capability */
+ __le32 fwcapinfo;
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_control {
+ struct cmd_header hdr;
+ __le16 action;
+ u16 reserved;
+};
+
+struct cmd_ds_802_11_mac_address {
+ struct cmd_header hdr;
+
+ __le16 action;
+ uint8_t macadd[ETH_ALEN];
+};
+
+struct cmd_ds_mac_multicast_addr {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 nr_of_adrs;
+ u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
+};
+
+struct cmd_ds_set_mode {
+ struct cmd_header hdr;
+
+ __le16 mode;
+};
+
+struct cmd_ds_set_bssid {
+ struct cmd_header hdr;
+
+ u8 bssid[6];
+ u8 activate;
+};
+
+struct cmd_ds_802_11_radio_control {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 control;
+};
+
+
+struct cmd_ds_802_11_rf_channel {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 channel;
+ __le16 rftype; /* unused */
+ __le16 reserved; /* unused */
+ u8 channellist[32]; /* unused */
+};
+
+struct cmd_ds_set_boot2_ver {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 version;
+};
+
+struct cmd_ds_802_11_reset {
+ struct cmd_header hdr;
+
+ __le16 action;
+};
+
+struct cmd_ds_802_11_beacon_control {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 beacon_enable;
+ __le16 beacon_period;
+};
+
+struct cmd_ds_802_11_beacon_set {
+ struct cmd_header hdr;
+
+ __le16 len;
+ u8 beacon[MRVL_MAX_BCN_SIZE];
+};
+
+struct lbtf_private;
+struct cmd_ctrl_node;
+
+/** Function Prototype Declaration */
+void lbtf_set_mac_control(struct lbtf_private *priv);
+
+int lbtf_free_cmd_buffer(struct lbtf_private *priv);
+
+int lbtf_allocate_cmd_buffer(struct lbtf_private *priv);
+int lbtf_execute_next_command(struct lbtf_private *priv);
+int lbtf_set_radio_control(struct lbtf_private *priv);
+int lbtf_update_hw_spec(struct lbtf_private *priv);
+int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv);
+void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode);
+void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid);
+int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr);
+
+int lbtf_set_channel(struct lbtf_private *priv, u8 channel);
+
+int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon);
+int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable,
+ int beacon_int);
+
+
+int lbtf_process_rx_command(struct lbtf_private *priv);
+void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd,
+ int result);
+void lbtf_cmd_response_rx(struct lbtf_private *priv);
+
+/* main.c */
+struct chan_freq_power *lbtf_get_region_cfp_table(u8 region,
+ int *cfp_no);
+struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev);
+int lbtf_remove_card(struct lbtf_private *priv);
+int lbtf_start_card(struct lbtf_private *priv);
+int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb);
+void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail);
+void lbtf_bcn_sent(struct lbtf_private *priv);
+
+/* support functions for cmd.c */
+/* lbtf_cmd() infers the size of the buffer to copy data back into, from
+ the size of the target of the pointer. Since the command to be sent
+ may often be smaller, that size is set in cmd->size by the caller.*/
+#define lbtf_cmd(priv, cmdnr, cmd, cb, cb_arg) ({ \
+ uint16_t __sz = le16_to_cpu((cmd)->hdr.size); \
+ (cmd)->hdr.size = cpu_to_le16(sizeof(*(cmd))); \
+ __lbtf_cmd(priv, cmdnr, &(cmd)->hdr, __sz, cb, cb_arg); \
+})
+
+#define lbtf_cmd_with_response(priv, cmdnr, cmd) \
+ lbtf_cmd(priv, cmdnr, cmd, lbtf_cmd_copyback, (unsigned long) (cmd))
+
+void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command,
+ struct cmd_header *in_cmd, int in_cmd_size);
+
+int __lbtf_cmd(struct lbtf_private *priv, uint16_t command,
+ struct cmd_header *in_cmd, int in_cmd_size,
+ int (*callback)(struct lbtf_private *, unsigned long,
+ struct cmd_header *),
+ unsigned long callback_arg);
+
+int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra,
+ struct cmd_header *resp);
--- /dev/null
+/*
+ * Copyright (C) 2008, cozybit Inc.
+ * Copyright (C) 2003-2006, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include "libertas_tf.h"
+#include "linux/etherdevice.h"
+
+#define DRIVER_RELEASE_VERSION "004.p0"
+/* thinfirm version: 5.132.X.pX */
+#define LBTF_FW_VER_MIN 0x05840300
+#define LBTF_FW_VER_MAX 0x0584ffff
+#define QOS_CONTROL_LEN 2
+
+static const char lbtf_driver_version[] = "THINFIRM-USB8388-" DRIVER_RELEASE_VERSION;
+struct workqueue_struct *lbtf_wq;
+
+static const struct ieee80211_channel lbtf_channels[] = {
+ { .center_freq = 2412, .hw_value = 1 },
+ { .center_freq = 2417, .hw_value = 2 },
+ { .center_freq = 2422, .hw_value = 3 },
+ { .center_freq = 2427, .hw_value = 4 },
+ { .center_freq = 2432, .hw_value = 5 },
+ { .center_freq = 2437, .hw_value = 6 },
+ { .center_freq = 2442, .hw_value = 7 },
+ { .center_freq = 2447, .hw_value = 8 },
+ { .center_freq = 2452, .hw_value = 9 },
+ { .center_freq = 2457, .hw_value = 10 },
+ { .center_freq = 2462, .hw_value = 11 },
+ { .center_freq = 2467, .hw_value = 12 },
+ { .center_freq = 2472, .hw_value = 13 },
+ { .center_freq = 2484, .hw_value = 14 },
+};
+
+/* This table contains the hardware specific values for the modulation rates. */
+static const struct ieee80211_rate lbtf_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0, },
+ { .bitrate = 20,
+ .hw_value = 1,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = 2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = 3,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = 5,
+ .flags = 0 },
+ { .bitrate = 90,
+ .hw_value = 6,
+ .flags = 0 },
+ { .bitrate = 120,
+ .hw_value = 7,
+ .flags = 0 },
+ { .bitrate = 180,
+ .hw_value = 8,
+ .flags = 0 },
+ { .bitrate = 240,
+ .hw_value = 9,
+ .flags = 0 },
+ { .bitrate = 360,
+ .hw_value = 10,
+ .flags = 0 },
+ { .bitrate = 480,
+ .hw_value = 11,
+ .flags = 0 },
+ { .bitrate = 540,
+ .hw_value = 12,
+ .flags = 0 },
+};
+
+static void lbtf_cmd_work(struct work_struct *work)
+{
+ struct lbtf_private *priv = container_of(work, struct lbtf_private,
+ cmd_work);
+ spin_lock_irq(&priv->driver_lock);
+ /* command response? */
+ if (priv->cmd_response_rxed) {
+ priv->cmd_response_rxed = 0;
+ spin_unlock_irq(&priv->driver_lock);
+ lbtf_process_rx_command(priv);
+ spin_lock_irq(&priv->driver_lock);
+ }
+
+ if (priv->cmd_timed_out && priv->cur_cmd) {
+ struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
+
+ if (++priv->nr_retries > 10) {
+ lbtf_complete_command(priv, cmdnode,
+ -ETIMEDOUT);
+ priv->nr_retries = 0;
+ } else {
+ priv->cur_cmd = NULL;
+
+ /* Stick it back at the _top_ of the pending
+ * queue for immediate resubmission */
+ list_add(&cmdnode->list, &priv->cmdpendingq);
+ }
+ }
+ priv->cmd_timed_out = 0;
+ spin_unlock_irq(&priv->driver_lock);
+
+ if (!priv->fw_ready)
+ return;
+ /* Execute the next command */
+ if (!priv->cur_cmd)
+ lbtf_execute_next_command(priv);
+}
+
+/**
+ * lbtf_setup_firmware: initialize firmware.
+ *
+ * @priv A pointer to struct lbtf_private structure
+ *
+ * Returns: 0 on success.
+ */
+static int lbtf_setup_firmware(struct lbtf_private *priv)
+{
+ int ret = -1;
+
+ /*
+ * Read priv address from HW
+ */
+ memset(priv->current_addr, 0xff, ETH_ALEN);
+ ret = lbtf_update_hw_spec(priv);
+ if (ret) {
+ ret = -1;
+ goto done;
+ }
+
+ lbtf_set_mac_control(priv);
+ lbtf_set_radio_control(priv);
+
+ ret = 0;
+done:
+ return ret;
+}
+
+/**
+ * This function handles the timeout of command sending.
+ * It will re-send the same command again.
+ */
+static void command_timer_fn(unsigned long data)
+{
+ struct lbtf_private *priv = (struct lbtf_private *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ if (!priv->cur_cmd) {
+ printk(KERN_DEBUG "libertastf: command timer expired; "
+ "no pending command\n");
+ goto out;
+ }
+
+ printk(KERN_DEBUG "libertas: command %x timed out\n",
+ le16_to_cpu(priv->cur_cmd->cmdbuf->command));
+
+ priv->cmd_timed_out = 1;
+ queue_work(lbtf_wq, &priv->cmd_work);
+out:
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+}
+
+static int lbtf_init_adapter(struct lbtf_private *priv)
+{
+ memset(priv->current_addr, 0xff, ETH_ALEN);
+ mutex_init(&priv->lock);
+
+ priv->vif = NULL;
+ setup_timer(&priv->command_timer, command_timer_fn,
+ (unsigned long)priv);
+
+ INIT_LIST_HEAD(&priv->cmdfreeq);
+ INIT_LIST_HEAD(&priv->cmdpendingq);
+
+ spin_lock_init(&priv->driver_lock);
+
+ /* Allocate the command buffers */
+ if (lbtf_allocate_cmd_buffer(priv))
+ return -1;
+
+ return 0;
+}
+
+static void lbtf_free_adapter(struct lbtf_private *priv)
+{
+ lbtf_free_cmd_buffer(priv);
+ del_timer(&priv->command_timer);
+}
+
+static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct lbtf_private *priv = hw->priv;
+
+ priv->skb_to_tx = skb;
+ queue_work(lbtf_wq, &priv->tx_work);
+ /*
+ * queue will be restarted when we receive transmission feedback if
+ * there are no buffered multicast frames to send
+ */
+ ieee80211_stop_queues(priv->hw);
+ return 0;
+}
+
+static void lbtf_tx_work(struct work_struct *work)
+{
+ struct lbtf_private *priv = container_of(work, struct lbtf_private,
+ tx_work);
+ unsigned int len;
+ struct ieee80211_tx_info *info;
+ struct txpd *txpd;
+ struct sk_buff *skb = NULL;
+ int err;
+
+ if ((priv->vif->type == IEEE80211_IF_TYPE_AP) &&
+ (!skb_queue_empty(&priv->bc_ps_buf)))
+ skb = skb_dequeue(&priv->bc_ps_buf);
+ else if (priv->skb_to_tx) {
+ skb = priv->skb_to_tx;
+ priv->skb_to_tx = NULL;
+ } else
+ return;
+
+ len = skb->len;
+ info = IEEE80211_SKB_CB(skb);
+ txpd = (struct txpd *) skb_push(skb, sizeof(struct txpd));
+
+ if (priv->surpriseremoved) {
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ memset(txpd, 0, sizeof(struct txpd));
+ /* Activate per-packet rate selection */
+ txpd->tx_control |= cpu_to_le32(MRVL_PER_PACKET_RATE |
+ ieee80211_get_tx_rate(priv->hw, info)->hw_value);
+
+ /* copy destination address from 802.11 header */
+ memcpy(txpd->tx_dest_addr_high, skb->data + sizeof(struct txpd) + 4,
+ ETH_ALEN);
+ txpd->tx_packet_length = cpu_to_le16(len);
+ txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
+ BUG_ON(priv->tx_skb);
+ spin_lock_irq(&priv->driver_lock);
+ priv->tx_skb = skb;
+ err = priv->hw_host_to_card(priv, MVMS_DAT, skb->data, skb->len);
+ spin_unlock_irq(&priv->driver_lock);
+ if (err) {
+ dev_kfree_skb_any(skb);
+ priv->tx_skb = NULL;
+ }
+}
+
+static int lbtf_op_start(struct ieee80211_hw *hw)
+{
+ struct lbtf_private *priv = hw->priv;
+ void *card = priv->card;
+ int ret = -1;
+
+ if (!priv->fw_ready)
+ /* Upload firmware */
+ if (priv->hw_prog_firmware(card))
+ goto err_prog_firmware;
+
+ /* poke the firmware */
+ priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
+ priv->radioon = RADIO_ON;
+ priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
+ ret = lbtf_setup_firmware(priv);
+ if (ret)
+ goto err_prog_firmware;
+
+ if ((priv->fwrelease < LBTF_FW_VER_MIN) ||
+ (priv->fwrelease > LBTF_FW_VER_MAX)) {
+ ret = -1;
+ goto err_prog_firmware;
+ }
+
+ printk(KERN_INFO "libertastf: Marvell WLAN 802.11 thinfirm adapter\n");
+ return 0;
+
+err_prog_firmware:
+ priv->hw_reset_device(card);
+ return ret;
+}
+
+static void lbtf_op_stop(struct ieee80211_hw *hw)
+{
+ struct lbtf_private *priv = hw->priv;
+ unsigned long flags;
+ struct sk_buff *skb;
+
+ struct cmd_ctrl_node *cmdnode;
+ /* Flush pending command nodes */
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
+ cmdnode->result = -ENOENT;
+ cmdnode->cmdwaitqwoken = 1;
+ wake_up_interruptible(&cmdnode->cmdwait_q);
+ }
+
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ cancel_work_sync(&priv->cmd_work);
+ cancel_work_sync(&priv->tx_work);
+ while ((skb = skb_dequeue(&priv->bc_ps_buf)))
+ dev_kfree_skb_any(skb);
+ priv->radioon = RADIO_OFF;
+ lbtf_set_radio_control(priv);
+
+ return;
+}
+
+static int lbtf_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct lbtf_private *priv = hw->priv;
+ if (priv->vif != NULL)
+ return -EOPNOTSUPP;
+
+ priv->vif = conf->vif;
+ switch (conf->type) {
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ case IEEE80211_IF_TYPE_AP:
+ lbtf_set_mode(priv, LBTF_AP_MODE);
+ break;
+ case IEEE80211_IF_TYPE_STA:
+ lbtf_set_mode(priv, LBTF_STA_MODE);
+ break;
+ default:
+ priv->vif = NULL;
+ return -EOPNOTSUPP;
+ }
+ lbtf_set_mac_address(priv, (u8 *) conf->mac_addr);
+ return 0;
+}
+
+static void lbtf_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct lbtf_private *priv = hw->priv;
+
+ if (priv->vif->type == IEEE80211_IF_TYPE_AP ||
+ priv->vif->type == IEEE80211_IF_TYPE_MESH_POINT)
+ lbtf_beacon_ctrl(priv, 0, 0);
+ lbtf_set_mode(priv, LBTF_PASSIVE_MODE);
+ lbtf_set_bssid(priv, 0, NULL);
+ priv->vif = NULL;
+}
+
+static int lbtf_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
+{
+ struct lbtf_private *priv = hw->priv;
+ if (conf->channel->center_freq != priv->cur_freq) {
+ priv->cur_freq = conf->channel->center_freq;
+ lbtf_set_channel(priv, conf->channel->hw_value);
+ }
+ return 0;
+}
+
+static int lbtf_op_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
+{
+ struct lbtf_private *priv = hw->priv;
+ struct sk_buff *beacon;
+
+ switch (priv->vif->type) {
+ case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ beacon = ieee80211_beacon_get(hw, vif);
+ if (beacon) {
+ lbtf_beacon_set(priv, beacon);
+ kfree_skb(beacon);
+ lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (conf->bssid) {
+ u8 null_bssid[ETH_ALEN] = {0};
+ bool activate = compare_ether_addr(conf->bssid, null_bssid);
+ lbtf_set_bssid(priv, activate, conf->bssid);
+ }
+
+ return 0;
+}
+
+#define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)
+static void lbtf_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *new_flags,
+ int mc_count, struct dev_mc_list *mclist)
+{
+ struct lbtf_private *priv = hw->priv;
+ int old_mac_control = priv->mac_control;
+ int i;
+ changed_flags &= SUPPORTED_FIF_FLAGS;
+ *new_flags &= SUPPORTED_FIF_FLAGS;
+
+ if (!changed_flags)
+ return;
+
+ if (*new_flags & (FIF_PROMISC_IN_BSS))
+ priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE;
+ else
+ priv->mac_control &= ~CMD_ACT_MAC_PROMISCUOUS_ENABLE;
+ if (*new_flags & (FIF_ALLMULTI) ||
+ mc_count > MRVDRV_MAX_MULTICAST_LIST_SIZE) {
+ priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
+ priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE;
+ } else if (mc_count) {
+ priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE;
+ priv->mac_control &= ~CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
+ priv->nr_of_multicastmacaddr = mc_count;
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ memcpy(&priv->multicastlist[i], mclist->da_addr,
+ ETH_ALEN);
+ mclist = mclist->next;
+ }
+ lbtf_cmd_set_mac_multicast_addr(priv);
+ } else {
+ priv->mac_control &= ~(CMD_ACT_MAC_MULTICAST_ENABLE |
+ CMD_ACT_MAC_ALL_MULTICAST_ENABLE);
+ if (priv->nr_of_multicastmacaddr) {
+ priv->nr_of_multicastmacaddr = 0;
+ lbtf_cmd_set_mac_multicast_addr(priv);
+ }
+ }
+
+
+ if (priv->mac_control != old_mac_control)
+ lbtf_set_mac_control(priv);
+}
+
+static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct lbtf_private *priv = hw->priv;
+
+ if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+ if (bss_conf->use_short_preamble)
+ priv->preamble = CMD_TYPE_SHORT_PREAMBLE;
+ else
+ priv->preamble = CMD_TYPE_LONG_PREAMBLE;
+ lbtf_set_radio_control(priv);
+ }
+
+ return;
+}
+
+static const struct ieee80211_ops lbtf_ops = {
+ .tx = lbtf_op_tx,
+ .start = lbtf_op_start,
+ .stop = lbtf_op_stop,
+ .add_interface = lbtf_op_add_interface,
+ .remove_interface = lbtf_op_remove_interface,
+ .config = lbtf_op_config,
+ .config_interface = lbtf_op_config_interface,
+ .configure_filter = lbtf_op_configure_filter,
+ .bss_info_changed = lbtf_op_bss_info_changed,
+};
+
+int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb)
+{
+ struct ieee80211_rx_status stats;
+ struct rxpd *prxpd;
+ bool is_qos, is_4addr, is_amsdu, need_padding;
+ unsigned int flags;
+ u16 fc, fc_le;
+
+ prxpd = (struct rxpd *) skb->data;
+
+ stats.flag = 0;
+ if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
+ stats.flag |= RX_FLAG_FAILED_FCS_CRC;
+ stats.freq = priv->cur_freq;
+ stats.band = IEEE80211_BAND_2GHZ;
+ stats.signal = prxpd->snr;
+ stats.noise = prxpd->nf;
+ stats.qual = prxpd->snr - prxpd->nf;
+ /* Marvell rate index has a hole at value 4 */
+ if (prxpd->rx_rate > 4)
+ --prxpd->rx_rate;
+ stats.rate_idx = prxpd->rx_rate;
+ skb_pull(skb, sizeof(struct rxpd));
+
+ fc_le = *((__le16 *) skb->data);
+ fc = le16_to_cpu(fc_le);
+ flags = le32_to_cpu(*(__le32 *)(skb->data + 4));
+
+ is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
+ (fc & IEEE80211_STYPE_QOS_DATA);
+ is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
+ is_amsdu = ((fc & 0x8C) == 0x88) &&
+ (*(skb->data + ieee80211_hdrlen(fc_le) - QOS_CONTROL_LEN)
+ & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT);
+
+ need_padding = is_qos ^ is_4addr ^ is_amsdu;
+ if (need_padding) {
+ memmove(skb->data + 2, skb->data, skb->len);
+ skb_reserve(skb, 2);
+ }
+
+ ieee80211_rx_irqsafe(priv->hw, skb, &stats);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lbtf_rx);
+
+/**
+ * lbtf_add_card: Add and initialize the card, no fw upload yet.
+ *
+ * @card A pointer to card
+ *
+ * Returns: pointer to struct lbtf_priv.
+ */
+struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev)
+{
+ struct ieee80211_hw *hw;
+ struct lbtf_private *priv = NULL;
+
+ hw = ieee80211_alloc_hw(sizeof(struct lbtf_private), &lbtf_ops);
+ if (!hw)
+ goto done;
+
+ priv = hw->priv;
+ if (lbtf_init_adapter(priv))
+ goto err_init_adapter;
+
+ priv->hw = hw;
+ priv->card = card;
+ priv->tx_skb = NULL;
+
+ hw->queues = 1;
+ hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ hw->extra_tx_headroom = sizeof(struct txpd);
+ memcpy(priv->channels, lbtf_channels, sizeof(lbtf_channels));
+ memcpy(priv->rates, lbtf_rates, sizeof(lbtf_rates));
+ priv->band.n_bitrates = ARRAY_SIZE(lbtf_rates);
+ priv->band.bitrates = priv->rates;
+ priv->band.n_channels = ARRAY_SIZE(lbtf_channels);
+ priv->band.channels = priv->channels;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+ skb_queue_head_init(&priv->bc_ps_buf);
+
+ SET_IEEE80211_DEV(hw, dmdev);
+
+ INIT_WORK(&priv->cmd_work, lbtf_cmd_work);
+ INIT_WORK(&priv->tx_work, lbtf_tx_work);
+ if (ieee80211_register_hw(hw))
+ goto err_init_adapter;
+
+ goto done;
+
+err_init_adapter:
+ lbtf_free_adapter(priv);
+ ieee80211_free_hw(hw);
+ priv = NULL;
+
+done:
+ return priv;
+}
+EXPORT_SYMBOL_GPL(lbtf_add_card);
+
+
+int lbtf_remove_card(struct lbtf_private *priv)
+{
+ struct ieee80211_hw *hw = priv->hw;
+
+ priv->surpriseremoved = 1;
+ del_timer(&priv->command_timer);
+ lbtf_free_adapter(priv);
+ priv->hw = NULL;
+ ieee80211_unregister_hw(hw);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lbtf_remove_card);
+
+void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
+ memset(&info->status, 0, sizeof(info->status));
+ /*
+ * Commented out, otherwise we never go beyond 1Mbit/s using mac80211
+ * default pid rc algorithm.
+ *
+ * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt;
+ */
+ info->status.excessive_retries = fail ? 1 : 0;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ skb_pull(priv->tx_skb, sizeof(struct txpd));
+ ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
+ priv->tx_skb = NULL;
+ if (!priv->skb_to_tx && skb_queue_empty(&priv->bc_ps_buf))
+ ieee80211_wake_queues(priv->hw);
+ else
+ queue_work(lbtf_wq, &priv->tx_work);
+}
+EXPORT_SYMBOL_GPL(lbtf_send_tx_feedback);
+
+void lbtf_bcn_sent(struct lbtf_private *priv)
+{
+ struct sk_buff *skb = NULL;
+
+ if (priv->vif->type != IEEE80211_IF_TYPE_AP)
+ return;
+
+ if (skb_queue_empty(&priv->bc_ps_buf)) {
+ bool tx_buff_bc = 0;
+
+ while ((skb = ieee80211_get_buffered_bc(priv->hw, priv->vif))) {
+ skb_queue_tail(&priv->bc_ps_buf, skb);
+ tx_buff_bc = 1;
+ }
+ if (tx_buff_bc) {
+ ieee80211_stop_queues(priv->hw);
+ queue_work(lbtf_wq, &priv->tx_work);
+ }
+ }
+
+ skb = ieee80211_beacon_get(priv->hw, priv->vif);
+
+ if (skb) {
+ lbtf_beacon_set(priv, skb);
+ kfree_skb(skb);
+ }
+}
+EXPORT_SYMBOL_GPL(lbtf_bcn_sent);
+
+static int __init lbtf_init_module(void)
+{
+ lbtf_wq = create_workqueue("libertastf");
+ if (lbtf_wq == NULL) {
+ printk(KERN_ERR "libertastf: couldn't create workqueue\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void __exit lbtf_exit_module(void)
+{
+ destroy_workqueue(lbtf_wq);
+}
+
+module_init(lbtf_init_module);
+module_exit(lbtf_exit_module);
+
+MODULE_DESCRIPTION("Libertas WLAN Thinfirm Driver Library");
+MODULE_AUTHOR("Cozybit Inc.");
+MODULE_LICENSE("GPL");
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
+#include <linux/firmware.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <net/ieee80211.h>
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+
#include "hermes_rid.h"
+#include "hermes_dld.h"
#include "orinoco.h"
/********************************************************************/
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);
+/********************************************************************/
+/* Michael MIC crypto setup */
+/********************************************************************/
+#define MICHAEL_MIC_LEN 8
+static int orinoco_mic_init(struct orinoco_private *priv)
+{
+ priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->tx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->tx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->rx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->rx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void orinoco_mic_free(struct orinoco_private *priv)
+{
+ if (priv->tx_tfm_mic)
+ crypto_free_hash(priv->tx_tfm_mic);
+ if (priv->rx_tfm_mic)
+ crypto_free_hash(priv->rx_tfm_mic);
+}
+
+static int michael_mic(struct crypto_hash *tfm_michael, u8 *key,
+ u8 *da, u8 *sa, u8 priority,
+ u8 *data, size_t data_len, u8 *mic)
+{
+ struct hash_desc desc;
+ struct scatterlist sg[2];
+ u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
+
+ if (tfm_michael == NULL) {
+ printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+ return -1;
+ }
+
+ /* Copy header into buffer. We need the padding on the end zeroed */
+ memcpy(&hdr[0], da, ETH_ALEN);
+ memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
+ hdr[ETH_ALEN*2] = priority;
+ hdr[ETH_ALEN*2+1] = 0;
+ hdr[ETH_ALEN*2+2] = 0;
+ hdr[ETH_ALEN*2+3] = 0;
+
+ /* Use scatter gather to MIC header and data in one go */
+ sg_init_table(sg, 2);
+ sg_set_buf(&sg[0], hdr, sizeof(hdr));
+ sg_set_buf(&sg[1], data, data_len);
+
+ if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN))
+ return -1;
+
+ desc.tfm = tfm_michael;
+ desc.flags = 0;
+ return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr),
+ mic);
+}
+
/********************************************************************/
/* Internal helper functions */
/********************************************************************/
#define ORINOCO_MAX_BSS_COUNT 64
static int orinoco_bss_data_allocate(struct orinoco_private *priv)
{
- if (priv->bss_data)
+ if (priv->bss_xbss_data)
return 0;
- priv->bss_data =
- kzalloc(ORINOCO_MAX_BSS_COUNT * sizeof(bss_element), GFP_KERNEL);
- if (!priv->bss_data) {
+ if (priv->has_ext_scan)
+ priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+ sizeof(struct xbss_element),
+ GFP_KERNEL);
+ else
+ priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+ sizeof(struct bss_element),
+ GFP_KERNEL);
+
+ if (!priv->bss_xbss_data) {
printk(KERN_WARNING "Out of memory allocating beacons");
return -ENOMEM;
}
static void orinoco_bss_data_free(struct orinoco_private *priv)
{
- kfree(priv->bss_data);
- priv->bss_data = NULL;
+ kfree(priv->bss_xbss_data);
+ priv->bss_xbss_data = NULL;
}
+#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data)
+#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data)
static void orinoco_bss_data_init(struct orinoco_private *priv)
{
int i;
INIT_LIST_HEAD(&priv->bss_free_list);
INIT_LIST_HEAD(&priv->bss_list);
- for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
- list_add_tail(&priv->bss_data[i].list, &priv->bss_free_list);
+ if (priv->has_ext_scan)
+ for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+ list_add_tail(&(PRIV_XBSS[i].list),
+ &priv->bss_free_list);
+ else
+ for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+ list_add_tail(&(PRIV_BSS[i].list),
+ &priv->bss_free_list);
+
+}
+
+static inline u8 *orinoco_get_ie(u8 *data, size_t len,
+ enum ieee80211_mfie eid)
+{
+ u8 *p = data;
+ while ((p + 2) < (data + len)) {
+ if (p[0] == eid)
+ return p;
+ p += p[1] + 2;
+ }
+ return NULL;
+}
+
+#define WPA_OUI_TYPE "\x00\x50\xF2\x01"
+#define WPA_SELECTOR_LEN 4
+static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
+{
+ u8 *p = data;
+ while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
+ if ((p[0] == MFIE_TYPE_GENERIC) &&
+ (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
+ return p;
+ p += p[1] + 2;
+ }
+ return NULL;
+}
+
+
+/********************************************************************/
+/* Download functionality */
+/********************************************************************/
+
+struct fw_info {
+ char *pri_fw;
+ char *sta_fw;
+ char *ap_fw;
+ u32 pda_addr;
+ u16 pda_size;
+};
+
+const static struct fw_info orinoco_fw[] = {
+ { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
+ { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
+ { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 0x100 }
+};
+
+/* Structure used to access fields in FW
+ * Make sure LE decoding macros are used
+ */
+struct orinoco_fw_header {
+ char hdr_vers[6]; /* ASCII string for header version */
+ __le16 headersize; /* Total length of header */
+ __le32 entry_point; /* NIC entry point */
+ __le32 blocks; /* Number of blocks to program */
+ __le32 block_offset; /* Offset of block data from eof header */
+ __le32 pdr_offset; /* Offset to PDR data from eof header */
+ __le32 pri_offset; /* Offset to primary plug data */
+ __le32 compat_offset; /* Offset to compatibility data*/
+ char signature[0]; /* FW signature length headersize-20 */
+} __attribute__ ((packed));
+
+/* Download either STA or AP firmware into the card. */
+static int
+orinoco_dl_firmware(struct orinoco_private *priv,
+ const struct fw_info *fw,
+ int ap)
+{
+ /* Plug Data Area (PDA) */
+ __le16 pda[512] = { 0 };
+
+ hermes_t *hw = &priv->hw;
+ const struct firmware *fw_entry;
+ const struct orinoco_fw_header *hdr;
+ const unsigned char *first_block;
+ const unsigned char *end;
+ const char *firmware;
+ struct net_device *dev = priv->ndev;
+ int err;
+
+ if (ap)
+ firmware = fw->ap_fw;
+ else
+ firmware = fw->sta_fw;
+
+ printk(KERN_DEBUG "%s: Attempting to download firmware %s\n",
+ dev->name, firmware);
+
+ /* Read current plug data */
+ err = hermes_read_pda(hw, pda, fw->pda_addr,
+ min_t(u16, fw->pda_size, sizeof(pda)), 0);
+ printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
+ if (err)
+ return err;
+
+ err = request_firmware(&fw_entry, firmware, priv->dev);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot find firmware %s\n",
+ dev->name, firmware);
+ return -ENOENT;
+ }
+
+ hdr = (const struct orinoco_fw_header *) fw_entry->data;
+
+ /* Enable aux port to allow programming */
+ err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+ printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Program data */
+ first_block = (fw_entry->data +
+ le16_to_cpu(hdr->headersize) +
+ le32_to_cpu(hdr->block_offset));
+ end = fw_entry->data + fw_entry->size;
+
+ err = hermes_program(hw, first_block, end);
+ printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Update production data */
+ first_block = (fw_entry->data +
+ le16_to_cpu(hdr->headersize) +
+ le32_to_cpu(hdr->pdr_offset));
+
+ err = hermes_apply_pda_with_defaults(hw, first_block, pda);
+ printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err);
+ if (err)
+ goto abort;
+
+ /* Tell card we've finished */
+ err = hermesi_program_end(hw);
+ printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Check if we're running */
+ printk(KERN_DEBUG "%s: hermes_present returned %d\n",
+ dev->name, hermes_present(hw));
+
+abort:
+ release_firmware(fw_entry);
+ return err;
+}
+
+/* End markers */
+#define TEXT_END 0x1A /* End of text header */
+
+/*
+ * Process a firmware image - stop the card, load the firmware, reset
+ * the card and make sure it responds. For the secondary firmware take
+ * care of the PDA - read it and then write it on top of the firmware.
+ */
+static int
+symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
+ const unsigned char *image, const unsigned char *end,
+ int secondary)
+{
+ hermes_t *hw = &priv->hw;
+ int ret;
+ const unsigned char *ptr;
+ const unsigned char *first_block;
+
+ /* Plug Data Area (PDA) */
+ __le16 pda[256];
+
+ /* Binary block begins after the 0x1A marker */
+ ptr = image;
+ while (*ptr++ != TEXT_END);
+ first_block = ptr;
+
+ /* Read the PDA from EEPROM */
+ if (secondary) {
+ ret = hermes_read_pda(hw, pda, fw->pda_addr, sizeof(pda), 1);
+ if (ret)
+ return ret;
+ }
+
+ /* Stop the firmware, so that it can be safely rewritten */
+ if (priv->stop_fw) {
+ ret = priv->stop_fw(priv, 1);
+ if (ret)
+ return ret;
+ }
+
+ /* Program the adapter with new firmware */
+ ret = hermes_program(hw, first_block, end);
+ if (ret)
+ return ret;
+
+ /* Write the PDA to the adapter */
+ if (secondary) {
+ size_t len = hermes_blocks_length(first_block);
+ ptr = first_block + len;
+ ret = hermes_apply_pda(hw, ptr, pda);
+ if (ret)
+ return ret;
+ }
+
+ /* Run the firmware */
+ if (priv->stop_fw) {
+ ret = priv->stop_fw(priv, 0);
+ if (ret)
+ return ret;
+ }
+
+ /* Reset hermes chip and make sure it responds */
+ ret = hermes_init(hw);
+
+ /* hermes_reset() should return 0 with the secondary firmware */
+ if (secondary && ret != 0)
+ return -ENODEV;
+
+ /* And this should work with any firmware */
+ if (!hermes_present(hw))
+ return -ENODEV;
+
+ return 0;
+}
+
+
+/*
+ * Download the firmware into the card, this also does a PCMCIA soft
+ * reset on the card, to make sure it's in a sane state.
+ */
+static int
+symbol_dl_firmware(struct orinoco_private *priv,
+ const struct fw_info *fw)
+{
+ struct net_device *dev = priv->ndev;
+ int ret;
+ const struct firmware *fw_entry;
+
+ if (request_firmware(&fw_entry, fw->pri_fw,
+ priv->dev) != 0) {
+ printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+ dev->name, fw->pri_fw);
+ return -ENOENT;
+ }
+
+ /* Load primary firmware */
+ ret = symbol_dl_image(priv, fw, fw_entry->data,
+ fw_entry->data + fw_entry->size, 0);
+ release_firmware(fw_entry);
+ if (ret) {
+ printk(KERN_ERR "%s: Primary firmware download failed\n",
+ dev->name);
+ return ret;
+ }
+
+ if (request_firmware(&fw_entry, fw->sta_fw,
+ priv->dev) != 0) {
+ printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+ dev->name, fw->sta_fw);
+ return -ENOENT;
+ }
+
+ /* Load secondary firmware */
+ ret = symbol_dl_image(priv, fw, fw_entry->data,
+ fw_entry->data + fw_entry->size, 1);
+ release_firmware(fw_entry);
+ if (ret) {
+ printk(KERN_ERR "%s: Secondary firmware download failed\n",
+ dev->name);
+ }
+
+ return ret;
+}
+
+static int orinoco_download(struct orinoco_private *priv)
+{
+ int err = 0;
+ /* Reload firmware */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* case FIRMWARE_TYPE_INTERSIL: */
+ err = orinoco_dl_firmware(priv,
+ &orinoco_fw[priv->firmware_type], 0);
+ break;
+
+ case FIRMWARE_TYPE_SYMBOL:
+ err = symbol_dl_firmware(priv,
+ &orinoco_fw[priv->firmware_type]);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ break;
+ }
+ /* TODO: if we fail we probably need to reinitialise
+ * the driver */
+
+ return err;
}
/********************************************************************/
int err = 0;
u16 txfid = priv->txfid;
struct ethhdr *eh;
- int data_off;
- struct hermes_tx_descriptor desc;
+ int tx_control;
unsigned long flags;
if (! netif_running(dev)) {
if (skb->len < ETH_HLEN)
goto drop;
- eh = (struct ethhdr *)skb->data;
+ tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
- memset(&desc, 0, sizeof(desc));
- desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx descriptor "
- "to BAP\n", dev->name, err);
- goto busy;
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
+ tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+ HERMES_TXCTRL_MIC;
+
+ if (priv->has_alt_txcntl) {
+ /* WPA enabled firmwares have tx_cntl at the end of
+ * the 802.11 header. So write zeroed descriptor and
+ * 802.11 header at the same time
+ */
+ char desc[HERMES_802_3_OFFSET];
+ __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
+
+ memset(&desc, 0, sizeof(desc));
+
+ *txcntl = cpu_to_le16(tx_control);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx "
+ "descriptor to BAP\n", dev->name, err);
+ goto busy;
+ }
+ } else {
+ struct hermes_tx_descriptor desc;
+
+ memset(&desc, 0, sizeof(desc));
+
+ desc.tx_control = cpu_to_le16(tx_control);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx "
+ "descriptor to BAP\n", dev->name, err);
+ goto busy;
+ }
+
+ /* Clear the 802.11 header and data length fields - some
+ * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+ * if this isn't done. */
+ hermes_clear_words(hw, HERMES_DATA0,
+ HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
}
- /* Clear the 802.11 header and data length fields - some
- * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
- * if this isn't done. */
- hermes_clear_words(hw, HERMES_DATA0,
- HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+ eh = (struct ethhdr *)skb->data;
/* Encapsulate Ethernet-II frames */
if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
/* Strip destination and source from the data */
skb_pull(skb, 2 * ETH_ALEN);
- data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr);
/* And move them to a separate header */
memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
- err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing packet "
- "header to BAP\n", dev->name, err);
- goto busy;
+ /* Insert the SNAP header */
+ if (skb_headroom(skb) < sizeof(hdr)) {
+ printk(KERN_ERR
+ "%s: Not enough headroom for 802.2 headers %d\n",
+ dev->name, skb_headroom(skb));
+ goto drop;
}
- } else { /* IEEE 802.3 frame */
- data_off = HERMES_802_3_OFFSET;
+ eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
+ memcpy(eh, &hdr, sizeof(hdr));
}
err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, data_off);
+ txfid, HERMES_802_3_OFFSET);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
dev->name, err);
goto busy;
}
+ /* Calculate Michael MIC */
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
+ u8 mic_buf[MICHAEL_MIC_LEN + 1];
+ u8 *mic;
+ size_t offset;
+ size_t len;
+
+ if (skb->len % 2) {
+ /* MIC start is on an odd boundary */
+ mic_buf[0] = skb->data[skb->len - 1];
+ mic = &mic_buf[1];
+ offset = skb->len - 1;
+ len = MICHAEL_MIC_LEN + 1;
+ } else {
+ mic = &mic_buf[0];
+ offset = skb->len;
+ len = MICHAEL_MIC_LEN;
+ }
+
+ michael_mic(priv->tx_tfm_mic,
+ priv->tkip_key[priv->tx_key].tx_mic,
+ eh->h_dest, eh->h_source, 0 /* priority */,
+ skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
+
+ /* Write the MIC */
+ err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+ txfid, HERMES_802_3_OFFSET + offset);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
+ dev->name, err);
+ goto busy;
+ }
+ }
+
/* Finally, we actually initiate the send */
netif_stop_queue(dev);
}
dev->trans_start = jiffies;
- stats->tx_bytes += data_off + skb->len;
+ stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
goto ok;
drop:
stats->rx_dropped++;
}
+/* Get tsc from the firmware */
+static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key,
+ u8 *tsc)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
+
+ if ((key < 0) || (key > 4))
+ return -EINVAL;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+ sizeof(tsc_arr), NULL, &tsc_arr);
+ if (!err)
+ memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
+
+ return err;
+}
+
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
struct net_device_stats *stats = &priv->stats;
struct iw_statistics *wstats = &priv->wstats;
struct sk_buff *skb = NULL;
- u16 rxfid, status, fc;
+ u16 rxfid, status;
int length;
- struct hermes_rx_descriptor desc;
- struct ethhdr *hdr;
+ struct hermes_rx_descriptor *desc;
+ struct orinoco_rx_data *rx_data;
int err;
+ desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
+ if (!desc) {
+ printk(KERN_WARNING
+ "%s: Can't allocate space for RX descriptor\n",
+ dev->name);
+ goto update_stats;
+ }
+
rxfid = hermes_read_regn(hw, RXFID);
- err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
+ err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
rxfid, 0);
if (err) {
printk(KERN_ERR "%s: error %d reading Rx descriptor. "
goto update_stats;
}
- status = le16_to_cpu(desc.status);
+ status = le16_to_cpu(desc->status);
if (status & HERMES_RXSTAT_BADCRC) {
DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
/* Handle frames in monitor mode */
if (priv->iw_mode == IW_MODE_MONITOR) {
- orinoco_rx_monitor(dev, rxfid, &desc);
- return;
+ orinoco_rx_monitor(dev, rxfid, desc);
+ goto out;
}
if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
goto update_stats;
}
- length = le16_to_cpu(desc.data_len);
- fc = le16_to_cpu(desc.frame_ctl);
+ length = le16_to_cpu(desc->data_len);
/* Sanity checks */
if (length < 3) { /* No for even an 802.2 LLC header */
/* At least on Symbol firmware with PCF we get quite a
lot of these legitimately - Poll frames with no
data. */
- return;
+ goto out;
}
if (length > IEEE80211_DATA_LEN) {
printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
goto update_stats;
}
+ /* Payload size does not include Michael MIC. Increase payload
+ * size to read it together with the data. */
+ if (status & HERMES_RXSTAT_MIC)
+ length += MICHAEL_MIC_LEN;
+
/* We need space for the packet data itself, plus an ethernet
header, plus 2 bytes so we can align the IP header on a
32bit boundary, plus 1 byte so we can read in odd length
goto drop;
}
+ /* Add desc and skb to rx queue */
+ rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
+ if (!rx_data) {
+ printk(KERN_WARNING "%s: Can't allocate RX packet\n",
+ dev->name);
+ goto drop;
+ }
+ rx_data->desc = desc;
+ rx_data->skb = skb;
+ list_add_tail(&rx_data->list, &priv->rx_list);
+ tasklet_schedule(&priv->rx_tasklet);
+
+ return;
+
+drop:
+ dev_kfree_skb_irq(skb);
+update_stats:
+ stats->rx_errors++;
+ stats->rx_dropped++;
+out:
+ kfree(desc);
+}
+
+static void orinoco_rx(struct net_device *dev,
+ struct hermes_rx_descriptor *desc,
+ struct sk_buff *skb)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 status, fc;
+ int length;
+ struct ethhdr *hdr;
+
+ status = le16_to_cpu(desc->status);
+ length = le16_to_cpu(desc->data_len);
+ fc = le16_to_cpu(desc->frame_ctl);
+
+ /* Calculate and check MIC */
+ if (status & HERMES_RXSTAT_MIC) {
+ int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
+ HERMES_MIC_KEY_ID_SHIFT);
+ u8 mic[MICHAEL_MIC_LEN];
+ u8 *rxmic;
+ u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
+ desc->addr3 : desc->addr2;
+
+ /* Extract Michael MIC from payload */
+ rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
+
+ skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
+ length -= MICHAEL_MIC_LEN;
+
+ michael_mic(priv->rx_tfm_mic,
+ priv->tkip_key[key_id].rx_mic,
+ desc->addr1,
+ src,
+ 0, /* priority or QoS? */
+ skb->data,
+ skb->len,
+ &mic[0]);
+
+ if (memcmp(mic, rxmic,
+ MICHAEL_MIC_LEN)) {
+ union iwreq_data wrqu;
+ struct iw_michaelmicfailure wxmic;
+ DECLARE_MAC_BUF(mac);
+
+ printk(KERN_WARNING "%s: "
+ "Invalid Michael MIC in data frame from %s, "
+ "using key %i\n",
+ dev->name, print_mac(mac, src), key_id);
+
+ /* TODO: update stats */
+
+ /* Notify userspace */
+ memset(&wxmic, 0, sizeof(wxmic));
+ wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
+ wxmic.flags |= (desc->addr1[0] & 1) ?
+ IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
+ wxmic.src_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
+
+ (void) orinoco_hw_get_tkip_iv(priv, key_id,
+ &wxmic.tsc[0]);
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = sizeof(wxmic);
+ wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
+ (char *) &wxmic);
+
+ goto drop;
+ }
+ }
+
/* Handle decapsulation
* In most cases, the firmware tell us about SNAP frames.
* For some reason, the SNAP frames sent by LinkSys APs
hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
hdr->h_proto = htons(length);
}
- memcpy(hdr->h_dest, desc.addr1, ETH_ALEN);
+ memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
if (fc & IEEE80211_FCTL_FROMDS)
- memcpy(hdr->h_source, desc.addr3, ETH_ALEN);
+ memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
else
- memcpy(hdr->h_source, desc.addr2, ETH_ALEN);
+ memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
dev->last_rx = jiffies;
skb->protocol = eth_type_trans(skb, dev);
skb->pkt_type = PACKET_OTHERHOST;
/* Process the wireless stats if needed */
- orinoco_stat_gather(dev, skb, &desc);
+ orinoco_stat_gather(dev, skb, desc);
/* Pass the packet to the networking stack */
netif_rx(skb);
return;
- drop:
- dev_kfree_skb_irq(skb);
- update_stats:
+ drop:
+ dev_kfree_skb(skb);
stats->rx_errors++;
stats->rx_dropped++;
}
+static void orinoco_rx_isr_tasklet(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_rx_data *rx_data, *temp;
+ struct hermes_rx_descriptor *desc;
+ struct sk_buff *skb;
+
+ /* extract desc and skb from queue */
+ list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+ desc = rx_data->desc;
+ skb = rx_data->skb;
+ list_del(&rx_data->list);
+ kfree(rx_data);
+
+ orinoco_rx(dev, desc, skb);
+
+ kfree(desc);
+ }
+}
+
/********************************************************************/
/* Rx path (info frames) */
/********************************************************************/
}
/* Send new BSSID to userspace */
-static void orinoco_send_wevents(struct work_struct *work)
+static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, wevent_work);
struct net_device *dev = priv->ndev;
struct hermes *hw = &priv->hw;
union iwreq_data wrqu;
int err;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return;
err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
if (err != 0)
- goto out;
+ return;
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
/* Send event to user space */
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-
- out:
- orinoco_unlock(priv, &flags);
}
-
-static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
- unsigned long scan_age)
+static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
{
- bss_element *bss;
- bss_element *tmp_bss;
-
- /* Blow away current list of scan results */
- list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
- if (!scan_age ||
- time_after(jiffies, bss->last_scanned + scan_age)) {
- list_move_tail(&bss->list, &priv->bss_free_list);
- /* Don't blow away ->list, just BSS data */
- memset(bss, 0, sizeof(bss->bss));
- bss->last_scanned = 0;
- }
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ u8 buf[88];
+ u8 *ie;
+
+ if (!priv->has_wpa)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
+ sizeof(buf), NULL, &buf);
+ if (err != 0)
+ return;
+
+ ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+ if (ie) {
+ int rem = sizeof(buf) - (ie - &buf[0]);
+ wrqu.data.length = ie[1] + 2;
+ if (wrqu.data.length > rem)
+ wrqu.data.length = rem;
+
+ if (wrqu.data.length)
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
}
}
-static int orinoco_process_scan_results(struct net_device *dev,
- unsigned char *buf,
- int len)
+static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
- int offset; /* In the scan data */
- union hermes_scan_info *atom;
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
+ u8 *ie;
+
+ if (!priv->has_wpa)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
+ sizeof(buf), NULL, &buf);
+ if (err != 0)
+ return;
+
+ ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+ if (ie) {
+ int rem = sizeof(buf) - (ie - &buf[0]);
+ wrqu.data.length = ie[1] + 2;
+ if (wrqu.data.length > rem)
+ wrqu.data.length = rem;
+
+ if (wrqu.data.length)
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
+ }
+}
+
+static void orinoco_send_wevents(struct work_struct *work)
+{
+ struct orinoco_private *priv =
+ container_of(work, struct orinoco_private, wevent_work);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return;
+
+ orinoco_send_assocreqie_wevent(priv);
+ orinoco_send_assocrespie_wevent(priv);
+ orinoco_send_bssid_wevent(priv);
+
+ orinoco_unlock(priv, &flags);
+}
+
+static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
+ unsigned long scan_age)
+{
+ if (priv->has_ext_scan) {
+ struct xbss_element *bss;
+ struct xbss_element *tmp_bss;
+
+ /* Blow away current list of scan results */
+ list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+ if (!scan_age ||
+ time_after(jiffies, bss->last_scanned + scan_age)) {
+ list_move_tail(&bss->list,
+ &priv->bss_free_list);
+ /* Don't blow away ->list, just BSS data */
+ memset(&bss->bss, 0, sizeof(bss->bss));
+ bss->last_scanned = 0;
+ }
+ }
+ } else {
+ struct bss_element *bss;
+ struct bss_element *tmp_bss;
+
+ /* Blow away current list of scan results */
+ list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+ if (!scan_age ||
+ time_after(jiffies, bss->last_scanned + scan_age)) {
+ list_move_tail(&bss->list,
+ &priv->bss_free_list);
+ /* Don't blow away ->list, just BSS data */
+ memset(&bss->bss, 0, sizeof(bss->bss));
+ bss->last_scanned = 0;
+ }
+ }
+ }
+}
+
+static void orinoco_add_ext_scan_result(struct orinoco_private *priv,
+ struct agere_ext_scan_info *atom)
+{
+ struct xbss_element *bss = NULL;
+ int found = 0;
+
+ /* Try to update an existing bss first */
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ if (compare_ether_addr(bss->bss.bssid, atom->bssid))
+ continue;
+ /* ESSID lengths */
+ if (bss->bss.data[1] != atom->data[1])
+ continue;
+ if (memcmp(&bss->bss.data[2], &atom->data[2],
+ atom->data[1]))
+ continue;
+ found = 1;
+ break;
+ }
+
+ /* Grab a bss off the free list */
+ if (!found && !list_empty(&priv->bss_free_list)) {
+ bss = list_entry(priv->bss_free_list.next,
+ struct xbss_element, list);
+ list_del(priv->bss_free_list.next);
+
+ list_add_tail(&bss->list, &priv->bss_list);
+ }
+
+ if (bss) {
+ /* Always update the BSS to get latest beacon info */
+ memcpy(&bss->bss, atom, sizeof(bss->bss));
+ bss->last_scanned = jiffies;
+ }
+}
+
+static int orinoco_process_scan_results(struct net_device *dev,
+ unsigned char *buf,
+ int len)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int offset; /* In the scan data */
+ union hermes_scan_info *atom;
int atom_len;
switch (priv->firmware_type) {
/* Read the entries one by one */
for (; offset + atom_len <= len; offset += atom_len) {
int found = 0;
- bss_element *bss = NULL;
+ struct bss_element *bss = NULL;
/* Get next atom */
atom = (union hermes_scan_info *) (buf + offset);
/* Grab a bss off the free list */
if (!found && !list_empty(&priv->bss_free_list)) {
bss = list_entry(priv->bss_free_list.next,
- bss_element, list);
+ struct bss_element, list);
list_del(priv->bss_free_list.next);
list_add_tail(&bss->list, &priv->bss_list);
kfree(buf);
}
break;
+ case HERMES_INQ_CHANNELINFO:
+ {
+ struct agere_ext_scan_info *bss;
+
+ if (!priv->scan_inprogress) {
+ printk(KERN_DEBUG "%s: Got chaninfo without scan, "
+ "len=%d\n", dev->name, len);
+ break;
+ }
+
+ /* An empty result indicates that the scan is complete */
+ if (len == 0) {
+ union iwreq_data wrqu;
+
+ /* Scan is no longer in progress */
+ priv->scan_inprogress = 0;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ break;
+ }
+
+ /* Sanity check */
+ else if (len > sizeof(*bss)) {
+ printk(KERN_WARNING
+ "%s: Ext scan results too large (%d bytes). "
+ "Truncating results to %zd bytes.\n",
+ dev->name, len, sizeof(*bss));
+ len = sizeof(*bss);
+ } else if (len < (offsetof(struct agere_ext_scan_info,
+ data) + 2)) {
+ /* Drop this result now so we don't have to
+ * keep checking later */
+ printk(KERN_WARNING
+ "%s: Ext scan results too short (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
+ if (bss == NULL)
+ break;
+
+ /* Read scan data */
+ err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
+ infofid, sizeof(info));
+ if (err) {
+ kfree(bss);
+ break;
+ }
+
+ orinoco_add_ext_scan_result(priv, bss);
+
+ kfree(bss);
+ break;
+ }
case HERMES_INQ_SEC_STAT_AGERE:
/* Security status (Agere specific) */
/* Ignore this frame for now */
}
/* Change the WEP keys and/or the current keys. Can be called
- * either from __orinoco_hw_setup_wep() or directly from
+ * either from __orinoco_hw_setup_enc() or directly from
* orinoco_ioctl_setiwencode(). In the later case the association
* with the AP is not broken (if the firmware can handle it),
* which is needed for 802.1x implementations. */
return 0;
}
-static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
+static int __orinoco_hw_setup_enc(struct orinoco_private *priv)
{
hermes_t *hw = &priv->hw;
int err = 0;
int master_wep_flag;
int auth_flag;
+ int enc_flag;
- if (priv->wep_on)
+ /* Setup WEP keys for WEP and WPA */
+ if (priv->encode_alg)
__orinoco_hw_setup_wepkeys(priv);
if (priv->wep_restrict)
else
auth_flag = HERMES_AUTH_OPEN;
+ if (priv->wpa_enabled)
+ enc_flag = 2;
+ else if (priv->encode_alg == IW_ENCODE_ALG_WEP)
+ enc_flag = 1;
+ else
+ enc_flag = 0;
+
switch (priv->firmware_type) {
case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
- if (priv->wep_on) {
+ if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
/* Enable the shared-key authentication. */
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFAUTHENTICATION_AGERE,
}
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFWEPENABLED_AGERE,
- priv->wep_on);
+ enc_flag);
if (err)
return err;
+
+ if (priv->has_wpa) {
+ /* Set WPA key management */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
+ priv->key_mgmt);
+ if (err)
+ return err;
+ }
+
break;
case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
- if (priv->wep_on) {
+ if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
if (priv->wep_restrict ||
(priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
return 0;
}
+/* key must be 32 bytes, including the tx and rx MIC keys.
+ * rsc must be 8 bytes
+ * tsc must be 8 bytes or NULL
+ */
+static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
+ u8 *key, u8 *rsc, u8 *tsc)
+{
+ struct {
+ __le16 idx;
+ u8 rsc[IW_ENCODE_SEQ_MAX_SIZE];
+ u8 key[TKIP_KEYLEN];
+ u8 tx_mic[MIC_KEYLEN];
+ u8 rx_mic[MIC_KEYLEN];
+ u8 tsc[IW_ENCODE_SEQ_MAX_SIZE];
+ } __attribute__ ((packed)) buf;
+ int ret;
+ int err;
+ int k;
+ u16 xmitting;
+
+ key_idx &= 0x3;
+
+ if (set_tx)
+ key_idx |= 0x8000;
+
+ buf.idx = cpu_to_le16(key_idx);
+ memcpy(buf.key, key,
+ sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic));
+
+ if (rsc == NULL)
+ memset(buf.rsc, 0, sizeof(buf.rsc));
+ else
+ memcpy(buf.rsc, rsc, sizeof(buf.rsc));
+
+ if (tsc == NULL) {
+ memset(buf.tsc, 0, sizeof(buf.tsc));
+ buf.tsc[4] = 0x10;
+ } else {
+ memcpy(buf.tsc, tsc, sizeof(buf.tsc));
+ }
+
+ /* Wait upto 100ms for tx queue to empty */
+ k = 100;
+ do {
+ k--;
+ udelay(1000);
+ ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
+ &xmitting);
+ if (ret)
+ break;
+ } while ((k > 0) && xmitting);
+
+ if (k == 0)
+ ret = -ETIMEDOUT;
+
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
+ &buf);
+
+ return ret ? ret : err;
+}
+
+static int orinoco_clear_tkip_key(struct orinoco_private *priv,
+ int key_idx)
+{
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx]));
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
+ key_idx);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
+ priv->ndev->name, err, key_idx);
+ return err;
+}
+
static int __orinoco_program_rids(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
}
/* Set up encryption */
- if (priv->has_wep) {
- err = __orinoco_hw_setup_wep(priv);
+ if (priv->has_wep || priv->has_wpa) {
+ err = __orinoco_hw_setup_enc(priv);
if (err) {
- printk(KERN_ERR "%s: Error %d activating WEP\n",
+ printk(KERN_ERR "%s: Error %d activating encryption\n",
dev->name, err);
return err;
}
}
}
+ if (priv->do_fw_download) {
+ err = orinoco_download(priv);
+ if (err)
+ priv->do_fw_download = 0;
+ }
+
err = orinoco_reinit_firmware(dev);
if (err) {
printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
priv->has_ibss = 1;
priv->has_wep = 0;
priv->has_big_wep = 0;
+ priv->has_alt_txcntl = 0;
+ priv->has_ext_scan = 0;
+ priv->has_wpa = 0;
+ priv->do_fw_download = 0;
/* Determine capabilities from the firmware version */
switch (priv->firmware_type) {
priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
priv->ibss_port = 1;
priv->has_hostscan = (firmver >= 0x8000a);
+ priv->do_fw_download = 1;
priv->broken_monitor = (firmver >= 0x80000);
-
+ priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_wpa = (firmver >= 0x9002a);
/* Tested with Agere firmware :
* 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
* Tested CableTron firmware : 4.32 => Anton */
firmver >= 0x31000;
priv->has_preamble = (firmver >= 0x20000);
priv->ibss_port = 4;
+
+ /* Symbol firmware is found on various cards, but
+ * there has been no attempt to check firmware
+ * download on non-spectrum_cs based cards.
+ *
+ * Given that the Agere firmware download works
+ * differently, we should avoid doing a firmware
+ * download with the Symbol algorithm on non-spectrum
+ * cards.
+ *
+ * For now we can identify a spectrum_cs based card
+ * because it has a firmware reset function.
+ */
+ priv->do_fw_download = (priv->stop_fw != NULL);
+
priv->broken_disableport = (firmver == 0x25013) ||
(firmver >= 0x30000 && firmver <= 0x31000);
priv->has_hostscan = (firmver >= 0x31001) ||
goto out;
}
+ if (priv->do_fw_download) {
+ err = orinoco_download(priv);
+ if (err)
+ priv->do_fw_download = 0;
+
+ /* Check firmware version again */
+ err = determine_firmware(dev);
+ if (err != 0) {
+ printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+ dev->name);
+ goto out;
+ }
+ }
+
if (priv->has_port3)
printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
if (priv->has_ibss)
else
printk("40-bit key\n");
}
+ if (priv->has_wpa) {
+ printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
+ if (orinoco_mic_init(priv)) {
+ printk(KERN_ERR "%s: Failed to setup MIC crypto "
+ "algorithm. Disabling WPA support\n", dev->name);
+ priv->has_wpa = 0;
+ }
+ }
+
+ /* Now we have the firmware capabilities, allocate appropiate
+ * sized scan buffers */
+ if (orinoco_bss_data_allocate(priv))
+ goto out;
+ orinoco_bss_data_init(priv);
/* Get the MAC address */
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
priv->channel = 0; /* use firmware default */
priv->promiscuous = 0;
- priv->wep_on = 0;
+ priv->encode_alg = IW_ENCODE_ALG_NONE;
priv->tx_key = 0;
+ priv->wpa_enabled = 0;
+ priv->tkip_cm_active = 0;
+ priv->key_mgmt = 0;
+ priv->wpa_ie_len = 0;
+ priv->wpa_ie = NULL;
/* Make the hardware available, as long as it hasn't been
* removed elsewhere (e.g. by PCMCIA hot unplug) */
return err;
}
-struct net_device *alloc_orinocodev(int sizeof_card,
- int (*hard_reset)(struct orinoco_private *))
+struct net_device
+*alloc_orinocodev(int sizeof_card,
+ struct device *device,
+ int (*hard_reset)(struct orinoco_private *),
+ int (*stop_fw)(struct orinoco_private *, int))
{
struct net_device *dev;
struct orinoco_private *priv;
+ sizeof(struct orinoco_private));
else
priv->card = NULL;
-
- if (orinoco_bss_data_allocate(priv))
- goto err_out_free;
- orinoco_bss_data_init(priv);
+ priv->dev = device;
/* Setup / override net_device fields */
dev->init = orinoco_init;
dev->set_multicast_list = orinoco_set_multicast_list;
/* we use the default eth_mac_addr for setting the MAC addr */
+ /* Reserve space in skb for the SNAP header */
+ dev->hard_header_len += ENCAPS_OVERHEAD;
+
/* Set up default callbacks */
dev->open = orinoco_open;
dev->stop = orinoco_stop;
priv->hard_reset = hard_reset;
+ priv->stop_fw = stop_fw;
spin_lock_init(&priv->lock);
priv->open = 0;
INIT_WORK(&priv->join_work, orinoco_join_ap);
INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
+ INIT_LIST_HEAD(&priv->rx_list);
+ tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
+ (unsigned long) dev);
+
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
return dev;
-
-err_out_free:
- free_netdev(dev);
- return NULL;
}
void free_orinocodev(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
+ /* No need to empty priv->rx_list: if the tasklet is scheduled
+ * when we call tasklet_kill it will run one final time,
+ * emptying the list */
+ tasklet_kill(&priv->rx_tasklet);
+ priv->wpa_ie_len = 0;
+ kfree(priv->wpa_ie);
+ orinoco_mic_free(priv);
orinoco_bss_data_free(priv);
free_netdev(dev);
}
memset(range, 0, sizeof(struct iw_range));
range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 14;
+ range->we_version_source = 22;
/* Set available channels/frequencies */
range->num_channels = NUM_CHANNELS;
}
}
+ if (priv->has_wpa)
+ range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP;
+
if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
/* Quality stats meaningless in ad-hoc mode */
} else {
range->min_r_time = 0;
range->max_r_time = 65535 * 1000; /* ??? */
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ range->scan_capa = IW_SCAN_CAPA_ESSID;
+ else
+ range->scan_capa = IW_SCAN_CAPA_NONE;
+
/* Event capability (kernel) */
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
/* Event capability (driver) */
struct orinoco_private *priv = netdev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
int setindex = priv->tx_key;
- int enable = priv->wep_on;
+ int encode_alg = priv->encode_alg;
int restricted = priv->wep_restrict;
u16 xlen = 0;
int err = -EINPROGRESS; /* Call commit handler */
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
+ /* Clear any TKIP key we have */
+ if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP))
+ (void) orinoco_clear_tkip_key(priv, setindex);
+
if (erq->length > 0) {
if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
index = priv->tx_key;
xlen = 0;
/* Switch on WEP if off */
- if ((!enable) && (xlen > 0)) {
+ if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) {
setindex = index;
- enable = 1;
+ encode_alg = IW_ENCODE_ALG_WEP;
}
} else {
/* Important note : if the user do "iwconfig eth0 enc off",
}
if (erq->flags & IW_ENCODE_DISABLED)
- enable = 0;
+ encode_alg = IW_ENCODE_ALG_NONE;
if (erq->flags & IW_ENCODE_OPEN)
restricted = 0;
if (erq->flags & IW_ENCODE_RESTRICTED)
priv->tx_key = setindex;
/* Try fast key change if connected and only keys are changed */
- if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
+ if ((priv->encode_alg == encode_alg) &&
+ (priv->wep_restrict == restricted) &&
netif_carrier_ok(dev)) {
err = __orinoco_hw_setup_wepkeys(priv);
/* No need to commit if successful */
goto out;
}
- priv->wep_on = enable;
+ priv->encode_alg = encode_alg;
priv->wep_restrict = restricted;
out:
index = priv->tx_key;
erq->flags = 0;
- if (! priv->wep_on)
+ if (!priv->encode_alg)
erq->flags |= IW_ENCODE_DISABLED;
erq->flags |= index + 1;
return err;
}
+static int orinoco_ioctl_set_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, alg = ext->alg, set_key = 1;
+ unsigned long flags;
+ int err = -EINVAL;
+ u16 key_len;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Determine and validate the key index */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if ((idx < 1) || (idx > WEP_KEYS))
+ goto out;
+ idx--;
+ } else
+ idx = priv->tx_key;
+
+ if (encoding->flags & IW_ENCODE_DISABLED)
+ alg = IW_ENCODE_ALG_NONE;
+
+ if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
+ /* Clear any TKIP TX key we had */
+ (void) orinoco_clear_tkip_key(priv, priv->tx_key);
+ }
+
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ priv->tx_key = idx;
+ set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
+ (ext->key_len > 0)) ? 1 : 0;
+ }
+
+ if (set_key) {
+ /* Set the requested key first */
+ switch (alg) {
+ case IW_ENCODE_ALG_NONE:
+ priv->encode_alg = alg;
+ priv->keys[idx].len = 0;
+ break;
+
+ case IW_ENCODE_ALG_WEP:
+ if (ext->key_len > SMALL_KEY_SIZE)
+ key_len = LARGE_KEY_SIZE;
+ else if (ext->key_len > 0)
+ key_len = SMALL_KEY_SIZE;
+ else
+ goto out;
+
+ priv->encode_alg = alg;
+ priv->keys[idx].len = cpu_to_le16(key_len);
+
+ key_len = min(ext->key_len, key_len);
+
+ memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE);
+ memcpy(priv->keys[idx].data, ext->key, key_len);
+ break;
+
+ case IW_ENCODE_ALG_TKIP:
+ {
+ hermes_t *hw = &priv->hw;
+ u8 *tkip_iv = NULL;
+
+ if (!priv->has_wpa ||
+ (ext->key_len > sizeof(priv->tkip_key[0])))
+ goto out;
+
+ priv->encode_alg = alg;
+ memset(&priv->tkip_key[idx], 0,
+ sizeof(priv->tkip_key[idx]));
+ memcpy(&priv->tkip_key[idx], ext->key, ext->key_len);
+
+ if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+ tkip_iv = &ext->rx_seq[0];
+
+ err = __orinoco_hw_set_tkip_key(hw, idx,
+ ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
+ (u8 *) &priv->tkip_key[idx],
+ tkip_iv, NULL);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting TKIP key"
+ "\n", dev->name, err);
+
+ goto out;
+ }
+ default:
+ goto out;
+ }
+ }
+ err = -EINPROGRESS;
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_get_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, max_key_len;
+ unsigned long flags;
+ int err;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = -EINVAL;
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ goto out;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if ((idx < 1) || (idx > WEP_KEYS))
+ goto out;
+ idx--;
+ } else
+ idx = priv->tx_key;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ ext->alg = priv->encode_alg;
+ switch (priv->encode_alg) {
+ case IW_ENCODE_ALG_NONE:
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ break;
+ case IW_ENCODE_ALG_WEP:
+ ext->key_len = min(le16_to_cpu(priv->keys[idx].len),
+ (u16) max_key_len);
+ memcpy(ext->key, priv->keys[idx].data, ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ ext->key_len = min((u16) sizeof(struct orinoco_tkip_key),
+ (u16) max_key_len);
+ memcpy(ext->key, &priv->tkip_key[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ break;
+ }
+
+ err = 0;
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_param *param = &wrqu->param;
+ unsigned long flags;
+ int ret = -EINPROGRESS;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_PRIVACY_INVOKED:
+ case IW_AUTH_DROP_UNENCRYPTED:
+ /*
+ * orinoco does not use these parameters
+ */
+ break;
+
+ case IW_AUTH_KEY_MGMT:
+ /* wl_lkm implies value 2 == PSK for Hermes I
+ * which ties in with WEXT
+ * no other hints tho :(
+ */
+ priv->key_mgmt = param->value;
+ break;
+
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ /* When countermeasures are enabled, shut down the
+ * card; when disabled, re-enable the card. This must
+ * take effect immediately.
+ *
+ * TODO: Make sure that the EAPOL message is getting
+ * out before card disabled
+ */
+ if (param->value) {
+ priv->tkip_cm_active = 1;
+ ret = hermes_enable_port(hw, 0);
+ } else {
+ priv->tkip_cm_active = 0;
+ ret = hermes_disable_port(hw, 0);
+ }
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (param->value & IW_AUTH_ALG_SHARED_KEY)
+ priv->wep_restrict = 1;
+ else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
+ priv->wep_restrict = 0;
+ else
+ ret = -EINVAL;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ if (priv->has_wpa) {
+ priv->wpa_enabled = param->value ? 1 : 0;
+ } else {
+ if (param->value)
+ ret = -EOPNOTSUPP;
+ /* else silently accept disable of WPA */
+ priv->wpa_enabled = 0;
+ }
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
+static int orinoco_ioctl_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+ unsigned long flags;
+ int ret = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_KEY_MGMT:
+ param->value = priv->key_mgmt;
+ break;
+
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ param->value = priv->tkip_cm_active;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (priv->wep_restrict)
+ param->value = IW_AUTH_ALG_SHARED_KEY;
+ else
+ param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ param->value = priv->wpa_enabled;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
+static int orinoco_ioctl_set_genie(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u8 *buf;
+ unsigned long flags;
+ int err = 0;
+
+ if ((wrqu->data.length > MAX_WPA_IE_LEN) ||
+ (wrqu->data.length && (extra == NULL)))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (wrqu->data.length) {
+ buf = kmalloc(wrqu->data.length, GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(buf, extra, wrqu->data.length);
+ kfree(priv->wpa_ie);
+ priv->wpa_ie = buf;
+ priv->wpa_ie_len = wrqu->data.length;
+ } else {
+ kfree(priv->wpa_ie);
+ priv->wpa_ie = NULL;
+ priv->wpa_ie_len = 0;
+ }
+
+ if (priv->wpa_ie) {
+ /* Looks like wl_lkm wants to check the auth alg, and
+ * somehow pass it to the firmware.
+ * Instead it just calls the key mgmt rid
+ * - we do this in set auth.
+ */
+ }
+
+out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_get_genie(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
+ wrqu->data.length = 0;
+ goto out;
+ }
+
+ if (wrqu->data.length < priv->wpa_ie_len) {
+ err = -E2BIG;
+ goto out;
+ }
+
+ wrqu->data.length = priv->wpa_ie_len;
+ memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
+
+out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_set_mlme(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_mlme *mlme = (struct iw_mlme *)extra;
+ unsigned long flags;
+ int ret = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (mlme->cmd) {
+ case IW_MLME_DEAUTH:
+ /* silently ignore */
+ break;
+
+ case IW_MLME_DISASSOC:
+ {
+ struct {
+ u8 addr[ETH_ALEN];
+ __le16 reason_code;
+ } __attribute__ ((packed)) buf;
+
+ memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN);
+ buf.reason_code = cpu_to_le16(mlme->reason_code);
+ ret = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFDISASSOCIATE,
+ &buf);
+ break;
+ }
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
static int orinoco_ioctl_getretry(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rrq,
return err;
}
-/* Trigger a scan (look for other cells in the vicinity */
+/* Trigger a scan (look for other cells in the vicinity) */
static int orinoco_ioctl_setscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *srq,
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
+ struct iw_scan_req *si = (struct iw_scan_req *) extra;
int err = 0;
unsigned long flags;
* we access scan variables in priv is critical.
* o scan_inprogress : not touched by irq handler
* o scan_mode : not touched by irq handler
- * o scan_len : synchronised with scan_result
* Before modifying anything on those variables, please think hard !
* Jean II */
}
break;
case FIRMWARE_TYPE_AGERE:
- err = hermes_write_wordrec(hw, USER_BAP,
+ if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
+ struct hermes_idstring idbuf;
+ size_t len = min(sizeof(idbuf.val),
+ (size_t) si->essid_len);
+ idbuf.len = cpu_to_le16(len);
+ memcpy(idbuf.val, si->essid, len);
+
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ HERMES_BYTES_TO_RECLEN(len + 2),
+ &idbuf);
+ } else
+ err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFSCANSSID_AGERE,
0); /* Any ESSID */
if (err)
break;
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
+ if (priv->has_ext_scan) {
+ /* Clear scan results at the start of
+ * an extended scan */
+ orinoco_clear_scan_results(priv,
+ msecs_to_jiffies(15000));
+
+ /* TODO: Is this available on older firmware?
+ * Can we use it to scan specific channels
+ * for IW_SCAN_THIS_FREQ? */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANCHANNELS2GHZ,
+ 0x7FFF);
+ if (err)
+ goto out;
+
+ err = hermes_inquire(hw,
+ HERMES_INQ_CHANNELINFO);
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
break;
}
} else
#define MAX_CUSTOM_LEN 64
/* Translate scan data returned from the card to a card independant
- * format that the Wireless Tools will understand - Jean II
- * Return message length or -errno for fatal errors */
+ * format that the Wireless Tools will understand - Jean II */
static inline char *orinoco_translate_scan(struct net_device *dev,
struct iw_request_info *info,
char *current_ev,
u16 capabilities;
u16 channel;
struct iw_event iwe; /* Temporary buffer */
- char *p;
char custom[MAX_CUSTOM_LEN];
+ memset(&iwe, 0, sizeof(iwe));
+
/* First entry *MUST* be the AP MAC address */
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
/* Add mode */
iwe.cmd = SIOCGIWMODE;
capabilities = le16_to_cpu(bss->a.capabilities);
- if (capabilities & 0x3) {
- if (capabilities & 0x1)
+ if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ if (capabilities & WLAN_CAPABILITY_ESS)
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
channel = bss->s.channel;
if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
- /* Add frequency */
+ /* Add channel and frequency */
iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+
iwe.u.freq.m = channel_frequency[channel-1] * 100000;
iwe.u.freq.e = 1;
current_ev = iwe_stream_add_event(info, current_ev, end_buf,
&iwe, IW_EV_FREQ_LEN);
}
- /* Add quality statistics */
+ /* Add quality statistics. level and noise in dB. No link quality */
iwe.cmd = IWEVQUAL;
- iwe.u.qual.updated = 0x10; /* no link quality */
+ iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
/* Wireless tools prior to 27.pre22 will show link quality
/* Add encryption capability */
iwe.cmd = SIOCGIWENCODE;
- if (capabilities & 0x10)
+ if (capabilities & WLAN_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, bss->a.essid);
-
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
- iwe.cmd = IWEVCUSTOM;
- p = custom;
- p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
- " Last beacon: %dms ago",
- jiffies_to_msecs(jiffies - last_scanned));
- iwe.u.data.length = p - custom;
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
+ &iwe, NULL);
/* Bit rate is not available in Lucent/Agere firmwares */
if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
if (bss->p.rates[i] == 0x0)
break;
/* Bit rate given in 500 kb/s units (+ 0x80) */
- iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000);
+ iwe.u.bitrate.value =
+ ((bss->p.rates[i] & 0x7f) * 500000);
current_val = iwe_stream_add_value(info, current_ev,
current_val,
end_buf, &iwe,
current_ev = current_val;
}
+ /* Beacon interval */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "bcn_int=%d",
+ le16_to_cpu(bss->a.beacon_interv));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Capabilites */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "capab=0x%04x",
+ capabilities);
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - last_scanned));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ return current_ev;
+}
+
+static inline char *orinoco_translate_ext_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ char *current_ev,
+ char *end_buf,
+ struct agere_ext_scan_info *bss,
+ unsigned int last_scanned)
+{
+ u16 capabilities;
+ u16 channel;
+ struct iw_event iwe; /* Temporary buffer */
+ char custom[MAX_CUSTOM_LEN];
+ u8 *ie;
+
+ memset(&iwe, 0, sizeof(iwe));
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ ie = bss->data;
+ iwe.u.data.length = ie[1];
+ if (iwe.u.data.length) {
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, &ie[2]);
+ }
+
+ /* Add mode */
+ capabilities = le16_to_cpu(bss->capabilities);
+ if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ iwe.cmd = SIOCGIWMODE;
+ if (capabilities & WLAN_CAPABILITY_ESS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_UINT_LEN);
+ }
+
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_DS_SET);
+ channel = ie ? ie[2] : 0;
+ if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
+ /* Add channel and frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+
+ iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+ }
+
+ /* Add quality statistics. level and noise in dB. No link quality */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
+ iwe.u.qual.level = bss->level - 0x95;
+ iwe.u.qual.noise = bss->noise - 0x95;
+ /* Wireless tools prior to 27.pre22 will show link quality
+ * anyway, so we provide a reasonable value. */
+ if (iwe.u.qual.level > iwe.u.qual.noise)
+ iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+ else
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_QUAL_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (capabilities & WLAN_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, NULL);
+
+ /* WPA IE */
+ ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data));
+ if (ie) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie[1] + 2;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, ie);
+ }
+
+ /* RSN IE */
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RSN);
+ if (ie) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie[1] + 2;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, ie);
+ }
+
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RATES);
+ if (ie) {
+ char *p = current_ev + iwe_stream_lcp_len(info);
+ int i;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+
+ for (i = 2; i < (ie[1] + 2); i++) {
+ iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000);
+ p = iwe_stream_add_value(info, current_ev, p, end_buf,
+ &iwe, IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if (p > (current_ev + iwe_stream_lcp_len(info)))
+ current_ev = p;
+ }
+
+ /* Timestamp */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "tsf=%016llx",
+ le64_to_cpu(bss->timestamp));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Beacon interval */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "bcn_int=%d",
+ le16_to_cpu(bss->beacon_interval));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Capabilites */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "capab=0x%04x",
+ capabilities);
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - last_scanned));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
return current_ev;
}
char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- bss_element *bss;
int err = 0;
unsigned long flags;
char *current_ev = extra;
goto out;
}
- list_for_each_entry(bss, &priv->bss_list, list) {
- /* Translate to WE format this entry */
- current_ev = orinoco_translate_scan(dev, info, current_ev,
- extra + srq->length,
- &bss->bss,
- bss->last_scanned);
-
- /* Check if there is space for one more entry */
- if ((extra + srq->length - current_ev) <= IW_EV_ADDR_LEN) {
- /* Ask user space to try again with a bigger buffer */
- err = -E2BIG;
- goto out;
+ if (priv->has_ext_scan) {
+ struct xbss_element *bss;
+
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ /* Translate this entry to WE format */
+ current_ev =
+ orinoco_translate_ext_scan(dev, info,
+ current_ev,
+ extra + srq->length,
+ &bss->bss,
+ bss->last_scanned);
+
+ /* Check if there is space for one more entry */
+ if ((extra + srq->length - current_ev)
+ <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a
+ * bigger buffer */
+ err = -E2BIG;
+ goto out;
+ }
+ }
+
+ } else {
+ struct bss_element *bss;
+
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ /* Translate this entry to WE format */
+ current_ev = orinoco_translate_scan(dev, info,
+ current_ev,
+ extra + srq->length,
+ &bss->bss,
+ bss->last_scanned);
+
+ /* Check if there is space for one more entry */
+ if ((extra + srq->length - current_ev)
+ <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a
+ * bigger buffer */
+ err = -E2BIG;
+ goto out;
+ }
}
}
* Structures to export the Wireless Handlers
*/
+#define STD_IW_HANDLER(id, func) \
+ [IW_IOCTL_IDX(id)] = (iw_handler) func
static const iw_handler orinoco_handler[] = {
- [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit,
- [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname,
- [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq,
- [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq,
- [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode,
- [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode,
- [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
- [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
- [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
- [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy,
- [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy,
- [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy,
- [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy,
- [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
- [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
- [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
- [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan,
- [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid,
- [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid,
- [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick,
- [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick,
- [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate,
- [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate,
- [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts,
- [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts,
- [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag,
- [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag,
- [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry,
- [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode,
- [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode,
- [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower,
- [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower,
+ STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
+ STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname),
+ STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
+ STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
+ STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode),
+ STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode),
+ STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
+ STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
+ STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange),
+ STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
+ STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
+ STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
+ STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
+ STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
+ STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
+ STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan),
+ STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan),
+ STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
+ STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
+ STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick),
+ STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick),
+ STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
+ STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
+ STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts),
+ STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts),
+ STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag),
+ STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag),
+ STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry),
+ STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode),
+ STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode),
+ STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower),
+ STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower),
+ STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
+ STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
+ STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
+ STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
+ STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
+ STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
+ STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
};
#define DRIVER_VERSION "0.15"
+#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
char data[ORINOCO_MAX_KEY_SIZE];
} __attribute__ ((packed));
+#define TKIP_KEYLEN 16
+#define MIC_KEYLEN 8
+
+struct orinoco_tkip_key {
+ u8 tkip[TKIP_KEYLEN];
+ u8 tx_mic[MIC_KEYLEN];
+ u8 rx_mic[MIC_KEYLEN];
+};
+
typedef enum {
FIRMWARE_TYPE_AGERE,
FIRMWARE_TYPE_INTERSIL,
FIRMWARE_TYPE_SYMBOL
} fwtype_t;
-typedef struct {
+struct bss_element {
union hermes_scan_info bss;
unsigned long last_scanned;
struct list_head list;
-} bss_element;
+};
+
+struct xbss_element {
+ struct agere_ext_scan_info bss;
+ unsigned long last_scanned;
+ struct list_head list;
+};
+
+struct hermes_rx_descriptor;
+
+struct orinoco_rx_data {
+ struct hermes_rx_descriptor *desc;
+ struct sk_buff *skb;
+ struct list_head list;
+};
struct orinoco_private {
void *card; /* Pointer to card dependent structure */
+ struct device *dev;
int (*hard_reset)(struct orinoco_private *);
+ int (*stop_fw)(struct orinoco_private *, int);
/* Synchronisation stuff */
spinlock_t lock;
int hw_unavailable;
struct work_struct reset_work;
+ /* Interrupt tasklets */
+ struct tasklet_struct rx_tasklet;
+ struct list_head rx_list;
+ struct orinoco_rx_data *rx_data;
+
/* driver state */
int open;
u16 last_linkstatus;
unsigned int has_preamble:1;
unsigned int has_sensitivity:1;
unsigned int has_hostscan:1;
+ unsigned int has_alt_txcntl:1;
+ unsigned int has_ext_scan:1;
+ unsigned int has_wpa:1;
+ unsigned int do_fw_download:1;
unsigned int broken_disableport:1;
unsigned int broken_monitor:1;
/* Configuration paramaters */
u32 iw_mode;
int prefer_port3;
- u16 wep_on, wep_restrict, tx_key;
+ u16 encode_alg, wep_restrict, tx_key;
struct orinoco_key keys[ORINOCO_MAX_KEYS];
int bitratemode;
char nick[IW_ESSID_MAX_SIZE+1];
/* Scanning support */
struct list_head bss_list;
struct list_head bss_free_list;
- bss_element *bss_data;
+ void *bss_xbss_data;
int scan_inprogress; /* Scan pending... */
u32 scan_mode; /* Type of scan done */
+
+ /* WPA support */
+ u8 *wpa_ie;
+ int wpa_ie_len;
+
+ struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS];
+ struct crypto_hash *rx_tfm_mic;
+ struct crypto_hash *tx_tfm_mic;
+
+ unsigned int wpa_enabled:1;
+ unsigned int tkip_cm_active:1;
+ unsigned int key_mgmt:3;
};
#ifdef ORINOCO_DEBUG
/* Exported prototypes */
/********************************************************************/
-extern struct net_device *alloc_orinocodev(int sizeof_card,
- int (*hard_reset)(struct orinoco_private *));
+extern struct net_device *alloc_orinocodev(
+ int sizeof_card, struct device *device,
+ int (*hard_reset)(struct orinoco_private *),
+ int (*stop_fw)(struct orinoco_private *, int));
extern void free_orinocodev(struct net_device *dev);
extern int __orinoco_up(struct net_device *dev);
extern int __orinoco_down(struct net_device *dev);
struct orinoco_private *priv;
struct orinoco_pccard *card;
- dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
+ dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ orinoco_cs_hard_reset, NULL);
if (! dev)
return -ENOMEM;
priv = netdev_priv(dev);
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset);
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_nortel_cor_reset, NULL);
if (!dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset);
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_pci_cor_reset, NULL);
if (!dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset);
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_plx_cor_reset, NULL);
if (!dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset);
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_tmd_cor_reset, NULL);
if (!dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
-#ifndef PRISM54_H
-#define PRISM54_H
+#ifndef P54_H
+#define P54_H
/*
* Shared defines for all mac80211 Prism54 code
struct ieee80211_hw *p54_init_common(size_t priv_data_len);
void p54_free_common(struct ieee80211_hw *dev);
-#endif /* PRISM54_H */
+#endif /* P54_H */
-#ifndef PRISM54COMMON_H
-#define PRISM54COMMON_H
+#ifndef P54COMMON_H
+#define P54COMMON_H
/*
* Common code specific definitions for mac80211 Prism54 drivers
__le16 frameburst;
} __attribute__ ((packed));
-#endif /* PRISM54COMMON_H */
+#endif /* P54COMMON_H */
err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev);
if (err) {
- printk(KERN_ERR "%s (prism54pci): cannot find firmware "
+ printk(KERN_ERR "%s (p54pci): cannot find firmware "
"(isl3886)\n", pci_name(priv->pdev));
return err;
}
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, &p54p_simple_interrupt,
- IRQF_SHARED, "prism54pci", priv);
+ IRQF_SHARED, "p54pci", priv);
if (err) {
- printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n",
+ printk(KERN_ERR "%s (p54pci): failed to register IRQ handler\n",
pci_name(priv->pdev));
return err;
}
eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL);
if (!eeprom) {
- printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n",
+ printk(KERN_ERR "%s (p54pci): no memory for eeprom!\n",
pci_name(priv->pdev));
err = -ENOMEM;
goto out;
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
- printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n",
+ printk(KERN_ERR "%s (p54pci): Cannot boot firmware!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
alen = le16_to_cpu(ring_control->rx_mgmt[0].len);
if (le32_to_cpu(ring_control->device_idx[2]) != 1 ||
alen < 0x10) {
- printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n",
+ printk(KERN_ERR "%s (p54pci): Cannot read eeprom!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, &p54p_interrupt,
- IRQF_SHARED, "prism54pci", dev);
+ IRQF_SHARED, "p54pci", dev);
if (err) {
printk(KERN_ERR "%s: failed to register IRQ handler\n",
wiphy_name(dev->wiphy));
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n",
+ printk(KERN_ERR "%s (p54pci): Cannot enable new PCI device\n",
pci_name(pdev));
return err;
}
mem_addr = pci_resource_start(pdev, 0);
mem_len = pci_resource_len(pdev, 0);
if (mem_len < sizeof(struct p54p_csr)) {
- printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n",
+ printk(KERN_ERR "%s (p54pci): Too short PCI resources\n",
pci_name(pdev));
pci_disable_device(pdev);
return err;
}
- err = pci_request_regions(pdev, "prism54pci");
+ err = pci_request_regions(pdev, "p54pci");
if (err) {
- printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n",
+ printk(KERN_ERR "%s (p54pci): Cannot obtain PCI resources\n",
pci_name(pdev));
return err;
}
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n",
+ printk(KERN_ERR "%s (p54pci): No suitable DMA available\n",
pci_name(pdev));
goto err_free_reg;
}
dev = p54_init_common(sizeof(*priv));
if (!dev) {
- printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n",
+ printk(KERN_ERR "%s (p54pci): ieee80211 alloc failed\n",
pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
priv->map = ioremap(mem_addr, mem_len);
if (!priv->map) {
- printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n",
+ printk(KERN_ERR "%s (p54pci): Cannot map device memory\n",
pci_name(pdev));
err = -EINVAL; // TODO: use a better error code?
goto err_free_dev;
priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control),
&priv->ring_control_dma);
if (!priv->ring_control) {
- printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n",
+ printk(KERN_ERR "%s (p54pci): Cannot allocate rings\n",
pci_name(pdev));
err = -ENOMEM;
goto err_iounmap;
err = ieee80211_register_hw(dev);
if (err) {
- printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n",
+ printk(KERN_ERR "%s (p54pci): Cannot register netdevice\n",
pci_name(pdev));
goto err_free_common;
}
#endif /* CONFIG_PM */
static struct pci_driver p54p_driver = {
- .name = "prism54pci",
+ .name = "p54pci",
.id_table = p54p_table,
.probe = p54p_probe,
.remove = __devexit_p(p54p_remove),
-#ifndef PRISM54PCI_H
-#define PRISM54PCI_H
+#ifndef P54PCI_H
+#define P54PCI_H
/*
* Defines for PCI based mac80211 Prism54 driver
} __attribute__ ((packed));
/* usb backend only needs the register defines above */
-#ifndef PRISM54USB_H
+#ifndef P54USB_H
struct p54p_desc {
__le32 host_addr;
__le32 device_addr;
struct completion boot_comp;
};
-#endif /* PRISM54USB_H */
-#endif /* PRISM54PCI_H */
+#endif /* P54USB_H */
+#endif /* P54PCI_H */
buf = kmalloc(0x2020, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "prism54usb: cannot allocate memory for "
+ printk(KERN_ERR "p54usb: cannot allocate memory for "
"eeprom readback!\n");
return -ENOMEM;
}
*((u32 *) buf) = priv->common.rx_start;
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
if (err) {
- printk(KERN_ERR "prism54usb: addr send failed\n");
+ printk(KERN_ERR "p54usb: addr send failed\n");
goto fail;
}
} else {
reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg));
if (err) {
- printk(KERN_ERR "prism54usb: dev_int send failed\n");
+ printk(KERN_ERR "p54usb: dev_int send failed\n");
goto fail;
}
}
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf,
EEPROM_READBACK_LEN + priv->common.tx_hdr_len);
if (err) {
- printk(KERN_ERR "prism54usb: eeprom req send failed\n");
+ printk(KERN_ERR "p54usb: eeprom req send failed\n");
goto fail;
}
if (!err && alen > offset) {
p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset);
} else {
- printk(KERN_ERR "prism54usb: eeprom read failed!\n");
+ printk(KERN_ERR "p54usb: eeprom read failed!\n");
err = -EINVAL;
goto fail;
}
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size);
if (err) {
- printk(KERN_ERR "prism54usb: firmware upload failed!\n");
+ printk(KERN_ERR "p54usb: firmware upload failed!\n");
goto err_upload_failed;
}
*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
if (err) {
- printk(KERN_ERR "prism54usb: firmware upload failed!\n");
+ printk(KERN_ERR "p54usb: firmware upload failed!\n");
goto err_upload_failed;
}
break;
if (alen > 5 && !memcmp(buf, "ERROR", 5)) {
- printk(KERN_INFO "prism54usb: firmware upload failed!\n");
+ printk(KERN_INFO "p54usb: firmware upload failed!\n");
err = -EINVAL;
break;
}
if (time_after(jiffies, timeout)) {
- printk(KERN_ERR "prism54usb: firmware boot timed out!\n");
+ printk(KERN_ERR "p54usb: firmware boot timed out!\n");
err = -ETIMEDOUT;
break;
}
buf[1] = '\r';
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2);
if (err) {
- printk(KERN_ERR "prism54usb: firmware boot failed!\n");
+ printk(KERN_ERR "p54usb: firmware boot failed!\n");
goto err_upload_failed;
}
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len);
if (err) {
- printk(KERN_ERR "prism54usb: firmware block upload "
+ printk(KERN_ERR "p54usb: firmware block upload "
"failed\n");
goto fail;
}
0x002C | (unsigned long)&devreg->direct_mem_win);
if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) ||
!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) {
- printk(KERN_ERR "prism54usb: firmware DMA transfer "
+ printk(KERN_ERR "p54usb: firmware DMA transfer "
"failed\n");
goto fail;
}
dev = p54_init_common(sizeof(*priv));
if (!dev) {
- printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n");
+ printk(KERN_ERR "p54usb: ieee80211 alloc failed\n");
return -ENOMEM;
}
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
- printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
+ printk(KERN_WARNING "p54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
err = ieee80211_register_hw(dev);
if (err) {
- printk(KERN_ERR "prism54usb: Cannot register netdevice\n");
+ printk(KERN_ERR "p54usb: Cannot register netdevice\n");
goto err_free_dev;
}
}
static struct usb_driver p54u_driver = {
- .name = "prism54usb",
+ .name = "p54usb",
.id_table = p54u_table,
.probe = p54u_probe,
.disconnect = p54u_disconnect,
-#ifndef PRISM54USB_H
-#define PRISM54USB_H
+#ifndef P54USB_H
+#define P54USB_H
/*
* Defines for USB based mac80211 Prism54 driver
struct sk_buff_head rx_queue;
};
-#endif /* PRISM54USB_H */
+#endif /* P54USB_H */
if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) {
printk(KERN_DEBUG
"%s(): Sorry, Repeater mode and Secondary mode "
- "are not yet supported by this driver.\n", __FUNCTION__);
+ "are not yet supported by this driver.\n", __func__);
return -EINVAL;
}
if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) {
printk(KERN_DEBUG
"%s: %s() You passed a non-valid init_mode.\n",
- priv->ndev->name, __FUNCTION__);
+ priv->ndev->name, __func__);
return -EINVAL;
}
/* don't know how to disable radio */
printk(KERN_DEBUG
"%s: %s() disabling radio is not yet supported.\n",
- priv->ndev->name, __FUNCTION__);
+ priv->ndev->name, __func__);
return -ENOTSUPP;
} else if (vwrq->fixed)
/* currently only fixed value is supported */
else {
printk(KERN_DEBUG
"%s: %s() auto power will be implemented later.\n",
- priv->ndev->name, __FUNCTION__);
+ priv->ndev->name, __func__);
return -ENOTSUPP;
}
}
depends on RT2X00_LIB
select FW_LOADER
+config RT2X00_LIB_CRYPTO
+ boolean
+ depends on RT2X00_LIB
+
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
select CRC_ITU_T
select EEPROM_93CX6
---help---
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
select CRC_ITU_T
---help---
This adds support for rt2501 wireless chipset family.
rt2x00lib-y += rt2x00config.o
rt2x00lib-y += rt2x00queue.o
rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
* RF value list for RF2420 & RF2421
* Supports: 2.4 GHz
*/
-static const struct rf_channel rf_vals_bg[] = {
+static const struct rf_channel rf_vals_b[] = {
{ 1, 0x00022058, 0x000c1fda, 0x00000101, 0 },
{ 2, 0x00022058, 0x000c1fee, 0x00000101, 0 },
{ 3, 0x00022058, 0x000c2002, 0x00000101, 0 },
{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
};
-static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
- /*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
- spec->num_channels = ARRAY_SIZE(rf_vals_bg);
- spec->channels = rf_vals_bg;
+ spec->num_channels = ARRAY_SIZE(rf_vals_b);
+ spec->channels = rf_vals_b;
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ return 0;
}
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2400pci_probe_hw_mode(rt2x00dev);
+ retval = rt2400pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
#define MAX_TXPOWER 62
#define DEFAULT_TXPOWER 39
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- (__txpower) += MIN_TXPOWER; \
- ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \
- (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \
-})
+#define __CLAMP_TX(__txpower) \
+ clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
+
+#define TXPOWER_FROM_DEV(__txpower) \
+ ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
#endif /* RT2400PCI_H */
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
- /*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500pci_probe_hw_mode(rt2x00dev);
+ retval = rt2500pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500PCI_H */
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
- /*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500usb_probe_hw_mode(rt2x00dev);
+ retval = rt2500usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500USB_H */
/*
* Module information.
*/
-#define DRV_VERSION "2.1.8"
+#define DRV_VERSION "2.2.0"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
*/
#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
- wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
+ wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
- KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args)
+ KBUILD_MODNAME, __func__, __lvl, ##__args)
#ifdef CONFIG_RT2X00_DEBUG
#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
u32 rf4;
};
+/*
+ * Channel information structure
+ */
+struct channel_info {
+ unsigned int flags;
+#define GEOGRAPHY_ALLOWED 0x00000001
+
+ short tx_power1;
+ short tx_power2;
+};
+
/*
* Antenna setup values.
*/
* @num_channels: Number of supported channels. This is used as array size
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
- * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
- * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
- * @tx_power_default: Default TX power value to use when either
- * @tx_power_a or @tx_power_bg is missing.
+ * @channels_info: Additional information for channels (See &struct channel_info).
*/
struct hw_mode_spec {
unsigned int supported_bands;
unsigned int num_channels;
const struct rf_channel *channels;
-
- const u8 *tx_power_a;
- const u8 *tx_power_bg;
- u8 tx_power_default;
+ const struct channel_info *channels_info;
};
/*
*/
struct rt2x00lib_conf {
struct ieee80211_conf *conf;
+
struct rf_channel rf;
+ struct channel_info channel;
struct antenna_setup ant;
int ack_consume_time;
};
+/*
+ * Configuration structure for hardware encryption.
+ */
+struct rt2x00lib_crypto {
+ enum cipher cipher;
+
+ enum set_key_cmd cmd;
+ const u8 *address;
+
+ u32 bssidx;
+ u32 aid;
+
+ u8 key[16];
+ u8 tx_mic[8];
+ u8 rx_mic[8];
+};
+
/*
* Configuration structure wrapper around the
* rt2x00 interface configuration handler.
/*
* Configuration handlers.
*/
+ int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
+ int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
void (*config_filter) (struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags);
void (*config_intf) (struct rt2x00_dev *rt2x00dev,
DEVICE_DIRTY_CONFIG,
/*
- * Driver features
+ * Driver requirements
*/
DRIVER_REQUIRE_FIRMWARE,
DRIVER_REQUIRE_BEACON_GUARD,
DRIVER_REQUIRE_DMA,
/*
- * Driver configuration
+ * Driver features
*/
CONFIG_SUPPORT_HW_BUTTON,
+ CONFIG_SUPPORT_HW_CRYPTO,
+
+ /*
+ * Driver configuration
+ */
CONFIG_FRAME_TYPE,
CONFIG_RF_SEQUENCE,
CONFIG_EXTERNAL_LNA_A,
*/
u32 *rf;
+ /*
+ * LNA gain
+ */
+ short lna_gain;
+
/*
* USB Max frame size (for rt2500usb & rt73usb).
*/
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_addr_list *mc_list);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key);
+#else
+#define rt2x00mac_set_key NULL
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel->hw_value],
sizeof(libconf.rf));
+
+ memcpy(&libconf.channel,
+ &rt2x00dev->spec.channels_info[conf->channel->hw_value],
+ sizeof(libconf.channel));
}
if (flags & CONFIG_UPDATE_ANTENNA) {
--- /dev/null
+/*
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00lib
+ Abstract: rt2x00 crypto specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+ switch (key->alg) {
+ case ALG_WEP:
+ if (key->keylen == LEN_WEP40)
+ return CIPHER_WEP64;
+ else
+ return CIPHER_WEP128;
+ case ALG_TKIP:
+ return CIPHER_TKIP;
+ case ALG_CCMP:
+ return CIPHER_AES;
+ default:
+ return CIPHER_NONE;
+ }
+}
+
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+ struct ieee80211_key_conf *key = tx_info->control.hw_key;
+ unsigned int overhead = 0;
+
+ /*
+ * Extend frame length to include IV/EIV/ICV/MMIC,
+ * note that these lengths should only be added when
+ * mac80211 does not generate it.
+ */
+ overhead += tx_info->control.icv_len;
+
+ if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ overhead += tx_info->control.iv_len;
+
+ if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
+ if (key->alg == ALG_TKIP)
+ overhead += 8;
+ }
+
+ return overhead;
+}
+
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+
+ if (unlikely(!iv_len))
+ return;
+
+ /* Copy IV/EIV data */
+ if (iv_len >= 4)
+ memcpy(&skbdesc->iv, skb->data + header_length, 4);
+ if (iv_len >= 8)
+ memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4);
+
+ /* Move ieee80211 header */
+ memmove(skb->data + iv_len, skb->data, header_length);
+
+ /* Pull buffer to correct size */
+ skb_pull(skb, iv_len);
+
+ /* IV/EIV data has officially be stripped */
+ skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+ const unsigned int iv_len =
+ ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4);
+
+ if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+ return;
+
+ skb_push(skb, iv_len);
+
+ /* Move ieee80211 header */
+ memmove(skb->data, skb->data + iv_len, header_length);
+
+ /* Copy IV/EIV data */
+ if (iv_len >= 4)
+ memcpy(skb->data + header_length, &skbdesc->iv, 4);
+ if (iv_len >= 8)
+ memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4);
+
+ /* IV/EIV data has returned into the frame */
+ skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc)
+{
+ unsigned int payload_len = rxdesc->size - header_length;
+ unsigned int iv_len;
+ unsigned int icv_len;
+ unsigned int transfer = 0;
+
+ /*
+ * WEP64/WEP128: Provides IV & ICV
+ * TKIP: Provides IV/EIV & ICV
+ * AES: Provies IV/EIV & ICV
+ */
+ switch (rxdesc->cipher) {
+ case CIPHER_WEP64:
+ case CIPHER_WEP128:
+ iv_len = 4;
+ icv_len = 4;
+ break;
+ case CIPHER_TKIP:
+ iv_len = 8;
+ icv_len = 4;
+ break;
+ case CIPHER_AES:
+ iv_len = 8;
+ icv_len = 8;
+ break;
+ default:
+ /* Unsupport type */
+ return;
+ }
+
+ /*
+ * Make room for new data, note that we increase both
+ * headsize and tailsize when required. The tailsize is
+ * only needed when ICV data needs to be inserted and
+ * the padding is smaller then the ICV data.
+ * When alignment requirements is greater then the
+ * ICV data we must trim the skb to the correct size
+ * because we need to remove the extra bytes.
+ */
+ skb_push(skb, iv_len + align);
+ if (align < icv_len)
+ skb_put(skb, icv_len - align);
+ else if (align > icv_len)
+ skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+ /* Move ieee80211 header */
+ memmove(skb->data + transfer,
+ skb->data + transfer + iv_len + align,
+ header_length);
+ transfer += header_length;
+
+ /* Copy IV data */
+ if (iv_len >= 4) {
+ memcpy(skb->data + transfer, &rxdesc->iv, 4);
+ transfer += 4;
+ }
+
+ /* Copy EIV data */
+ if (iv_len >= 8) {
+ memcpy(skb->data + transfer, &rxdesc->eiv, 4);
+ transfer += 4;
+ }
+
+ /* Move payload */
+ if (align) {
+ memmove(skb->data + transfer,
+ skb->data + transfer + align,
+ payload_len);
+ }
+
+ /*
+ * NOTE: Always count the payload as transfered,
+ * even when alignment was set to zero. This is required
+ * for determining the correct offset for the ICV data.
+ */
+ transfer += payload_len;
+
+ /* Copy ICV data */
+ if (icv_len >= 4) {
+ memcpy(skb->data + transfer, &rxdesc->icv, 4);
+ /*
+ * AES appends 8 bytes, we can't fill the upper
+ * 4 bytes, but mac80211 doesn't care about what
+ * we provide here anyway and strips it immediately.
+ */
+ transfer += icv_len;
+ }
+
+ /* IV/EIV/ICV has been inserted into frame */
+ rxdesc->size = transfer;
+ rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
+}
#define MAX_LINE_LENGTH 64
+struct rt2x00debug_crypto {
+ unsigned long success;
+ unsigned long icv_error;
+ unsigned long mic_error;
+ unsigned long key_error;
+};
+
struct rt2x00debug_intf {
/*
* Pointer to driver structure where
* - queue folder
* - frame dump file
* - queue stats file
+ * - crypto stats file
*/
struct dentry *driver_folder;
struct dentry *driver_entry;
struct dentry *queue_folder;
struct dentry *queue_frame_dump_entry;
struct dentry *queue_stats_entry;
+ struct dentry *crypto_stats_entry;
/*
* The frame dump file only allows a single reader,
struct sk_buff_head frame_dump_skbqueue;
wait_queue_head_t frame_dump_waitqueue;
+ /*
+ * HW crypto statistics.
+ * All statistics are stored seperately per cipher type.
+ */
+ struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
+
/*
* Driver and chipset files will use a data buffer
* that has been created in advance. This will simplify
unsigned int offset_rf;
};
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher, enum rx_crypto status)
+{
+ struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+
+ if (cipher == CIPHER_TKIP_NO_MIC)
+ cipher = CIPHER_TKIP;
+ if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+ return;
+
+ /* Remove CIPHER_NONE index */
+ cipher--;
+
+ intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS);
+ intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV);
+ intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC);
+ intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY);
+}
+
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb)
{
.release = rt2x00debug_file_release,
};
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+static ssize_t rt2x00debug_read_crypto_stats(struct file *file,
+ char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ char *name[] = { "WEP64", "WEP128", "TKIP", "AES" };
+ char *data;
+ char *temp;
+ size_t size;
+ unsigned int i;
+
+ if (*offset)
+ return 0;
+
+ data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ temp = data;
+ temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n");
+
+ for (i = 0; i < CIPHER_MAX; i++) {
+ temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i],
+ intf->crypto_stats[i].success,
+ intf->crypto_stats[i].icv_error,
+ intf->crypto_stats[i].mic_error,
+ intf->crypto_stats[i].key_error);
+ }
+
+ size = strlen(data);
+ size = min(size, length);
+
+ if (copy_to_user(buf, data, size)) {
+ kfree(data);
+ return -EFAULT;
+ }
+
+ kfree(data);
+
+ *offset += size;
+ return size;
+}
+
+static const struct file_operations rt2x00debug_fop_crypto_stats = {
+ .owner = THIS_MODULE,
+ .read = rt2x00debug_read_crypto_stats,
+ .open = rt2x00debug_file_open,
+ .release = rt2x00debug_file_release,
+};
+#endif
+
#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \
static ssize_t rt2x00debug_read_##__name(struct file *file, \
char __user *buf, \
debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
intf, &rt2x00debug_fop_queue_stats);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ intf->crypto_stats_entry =
+ debugfs_create_file("crypto", S_IRUGO, intf->queue_folder,
+ intf, &rt2x00debug_fop_crypto_stats);
+#endif
+
return;
exit:
skb_queue_purge(&intf->frame_dump_skbqueue);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ debugfs_remove(intf->crypto_stats_entry);
+#endif
debugfs_remove(intf->queue_stats_entry);
debugfs_remove(intf->queue_frame_dump_entry);
debugfs_remove(intf->queue_folder);
*/
rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
+ /*
+ * If the IV/EIV data was stripped from the frame before it was
+ * passed to the hardware, we should now reinsert it again because
+ * mac80211 will expect the the same data to be present it the
+ * frame as it was passed to us.
+ */
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ rt2x00crypto_tx_insert_iv(entry->skb);
+
/*
* Send frame to debugfs immediately, after this call is completed
* we are going to overwrite the skb->cb array.
struct ieee80211_supported_band *sband;
struct ieee80211_hdr *hdr;
const struct rt2x00_rate *rate;
- unsigned int header_size;
+ unsigned int header_length;
unsigned int align;
unsigned int i;
int idx = -1;
* The data behind the ieee80211 header must be
* aligned on a 4 byte boundary.
*/
- header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
- align = ((unsigned long)(entry->skb->data + header_size)) & 3;
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+ align = ((unsigned long)(entry->skb->data + header_length)) & 3;
- if (align) {
+ /*
+ * Hardware might have stripped the IV/EIV/ICV data,
+ * in that case it is possible that the data was
+ * provided seperately (through hardware descriptor)
+ * in which case we should reinsert the data into the frame.
+ */
+ if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
+ rt2x00crypto_rx_insert_iv(entry->skb, align,
+ header_length, &rxdesc);
+ } else if (align) {
skb_push(entry->skb, align);
/* Move entire frame in 1 command */
memmove(entry->skb->data, entry->skb->data + align,
(rxdesc.dev_flags & RXDONE_MY_BSS))
rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
+ rt2x00debug_update_crypto(rt2x00dev,
+ rxdesc.cipher,
+ rxdesc.cipher_status);
+
rt2x00dev->link.qual.rx_success++;
rx_status->mactime = rxdesc.timestamp;
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
- unsigned char tx_power;
num_rates = 0;
if (spec->supported_rates & SUPPORT_RATE_CCK)
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
- if (spec->channels[i].channel <= 14) {
- if (spec->tx_power_bg)
- tx_power = spec->tx_power_bg[i];
- else
- tx_power = spec->tx_power_default;
- } else {
- if (spec->tx_power_a)
- tx_power = spec->tx_power_a[i];
- else
- tx_power = spec->tx_power_default;
- }
-
rt2x00lib_channel(&channels[i],
- spec->channels[i].channel, tx_power, i);
+ spec->channels[i].channel,
+ spec->channels_info[i].tx_power1, i);
}
/*
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
}
+
+ kfree(rt2x00dev->spec.channels_info);
}
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb);
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher, enum rx_crypto status);
#else
static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
{
struct sk_buff *skb)
{
}
+
+static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher,
+ enum rx_crypto status)
+{
+}
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+/*
+ * Crypto handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc);
+#else
+static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+ return CIPHER_NONE;
+}
+
+static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+ return 0;
+}
+
+static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+ unsigned int iv_len)
+{
+}
+
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+}
+
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
+ unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc)
+{
+}
+#endif
+
/*
* RFkill handlers.
*/
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
struct ieee80211_tx_info *rts_info;
struct sk_buff *skb;
- int size;
+ unsigned int data_length;
+ int retval = 0;
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
- size = sizeof(struct ieee80211_cts);
+ data_length = sizeof(struct ieee80211_cts);
else
- size = sizeof(struct ieee80211_rts);
+ data_length = sizeof(struct ieee80211_rts);
- skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
- if (!skb) {
+ skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
+ if (unlikely(!skb)) {
WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
+ return -ENOMEM;
}
skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
- skb_put(skb, size);
+ skb_put(skb, data_length);
/*
* Copy TX information over from original frame to
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+ skb->do_not_encrypt = 1;
+
+ /*
+ * RTS/CTS frame should use the length of the frame plus any
+ * encryption overhead that will be added by the hardware.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (!frag_skb->do_not_encrypt)
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_cts *)(skb->data));
else
ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_rts *)(skb->data));
- if (rt2x00queue_write_tx_frame(queue, skb)) {
+ retval = rt2x00queue_write_tx_frame(queue, skb);
+ if (retval) {
dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
}
- return NETDEV_TX_OK;
+ return retval;
}
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
- ieee80211_stop_queues(hw);
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ goto exit_fail;
/*
* Determine which queue to put packet on.
if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
!rt2x00dev->ops->hw->set_rts_threshold) {
- if (rt2x00queue_available(queue) <= 1) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
-
- if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
- }
+ if (rt2x00queue_available(queue) <= 1)
+ goto exit_fail;
- if (rt2x00queue_write_tx_frame(queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
+ if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
+ goto exit_fail;
}
+ if (rt2x00queue_write_tx_frame(queue, skb))
+ goto exit_fail;
+
if (rt2x00queue_threshold(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_OK;
+
+ exit_fail:
+ ieee80211_stop_queue(rt2x00dev->hw, qid);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int (*set_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
+ struct rt2x00lib_crypto crypto;
+
+ if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ return -EOPNOTSUPP;
+ else if (key->keylen > 32)
+ return -ENOSPC;
+
+ memset(&crypto, 0, sizeof(crypto));
+
+ /*
+ * When in STA mode, bssidx is always 0 otherwise local_address[5]
+ * contains the bss number, see BSS_ID_MASK comments for details.
+ */
+ if (rt2x00dev->intf_sta_count)
+ crypto.bssidx = 0;
+ else
+ crypto.bssidx =
+ local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+ crypto.cipher = rt2x00crypto_key_to_cipher(key);
+ if (crypto.cipher == CIPHER_NONE)
+ return -EOPNOTSUPP;
+
+ crypto.cmd = cmd;
+ crypto.address = address;
+
+ if (crypto.cipher == CIPHER_TKIP) {
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+ memcpy(&crypto.key,
+ &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+ sizeof(crypto.key));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+ memcpy(&crypto.tx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+ sizeof(crypto.tx_mic));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+ memcpy(&crypto.rx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+ sizeof(crypto.rx_mic));
+ } else
+ memcpy(&crypto.key, &key->key[0], key->keylen);
+
+ /*
+ * Each BSS has a maximum of 4 shared keys.
+ * Shared key index values:
+ * 0) BSS0 key0
+ * 1) BSS0 key1
+ * ...
+ * 4) BSS1 key0
+ * ...
+ * 8) BSS2 key0
+ * ...
+ * Both pairwise as shared key indeces are determined by
+ * driver. This is required because the hardware requires
+ * keys to be assigned in correct order (When key 1 is
+ * provided but key 0 is not, then the key is not found
+ * by the hardware during RX).
+ */
+ key->hw_key_idx = 0;
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ set_key = rt2x00dev->ops->lib->config_pairwise_key;
+ else
+ set_key = rt2x00dev->ops->lib->config_shared_key;
+
+ if (!set_key)
+ return -EOPNOTSUPP;
+
+ return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry)
{
- unsigned int frame_size;
- unsigned int reserved_size;
struct sk_buff *skb;
struct skb_frame_desc *skbdesc;
+ unsigned int frame_size;
+ unsigned int head_size = 0;
+ unsigned int tail_size = 0;
/*
* The frame size includes descriptor size, because the
* this means we need at least 3 bytes for moving the frame
* into the correct offset.
*/
- reserved_size = 4;
+ head_size = 4;
+
+ /*
+ * For IV/EIV/ICV assembly we must make sure there is
+ * at least 8 bytes bytes available in headroom for IV/EIV
+ * and 4 bytes for ICV data as tailroon.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ head_size += 8;
+ tail_size += 4;
+ }
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
/*
* Allocate skbuffer.
*/
- skb = dev_alloc_skb(frame_size + reserved_size);
+ skb = dev_alloc_skb(frame_size + head_size + tail_size);
if (!skb)
return NULL;
- skb_reserve(skb, reserved_size);
+ /*
+ * Make sure we not have a frame with the requested bytes
+ * available in the head and tail.
+ */
+ skb_reserve(skb, head_size);
skb_put(skb, frame_size);
/*
txdesc->cw_max = entry->queue->cw_max;
txdesc->aifs = entry->queue->aifs;
- /* Data length should be extended with 4 bytes for CRC */
+ /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */
data_length = entry->skb->len + 4;
/*
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
__set_bit(ENTRY_TXD_ACK, &txdesc->flags);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) &&
+ !entry->skb->do_not_encrypt) {
+ struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
+
+ __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
+
+ txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);
+
+ if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
+
+ txdesc->key_idx = hw_key->hw_key_idx;
+ txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+ /*
+ * Extend frame length to include all encryption overhead
+ * that will be added by the hardware.
+ */
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+
+ if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
+
+ if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+ __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
+ }
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
/*
* Check if this is a RTS/CTS frame
*/
struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct txentry_desc txdesc;
struct skb_frame_desc *skbdesc;
+ unsigned int iv_len = IEEE80211_SKB_CB(skb)->control.iv_len;
if (unlikely(rt2x00queue_full(queue)))
return -EINVAL;
rt2x00queue_create_tx_descriptor(entry, &txdesc);
/*
- * skb->cb array is now ours and we are free to use it.
+ * All information is retreived from the skb->cb array,
+ * now we should claim ownership of the driver part of that
+ * array.
*/
skbdesc = get_skb_frame_desc(entry->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->entry = entry;
+ /*
+ * When hardware encryption is supported, and this frame
+ * is to be encrypted, we should strip the IV/EIV data from
+ * the frame so we can provide it to the driver seperately.
+ */
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags))
+ rt2x00crypto_tx_remove_iv(skb, iv_len);
+
+ /*
+ * It could be possible that the queue was corrupted and this
+ * call failed. Just drop the frame, we cannot rollback and pass
+ * the frame to mac80211 because the skb->cb has now been tainted.
+ */
if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- return -EIO;
+ dev_kfree_skb_any(entry->skb);
+ entry->skb = NULL;
+ return 0;
}
if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
*
* @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
* @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
+ * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ * mac80211 but was stripped for processing by the driver.
*/
enum skb_frame_desc_flags {
- SKBDESC_DMA_MAPPED_RX = (1 << 0),
- SKBDESC_DMA_MAPPED_TX = (1 << 1),
+ SKBDESC_DMA_MAPPED_RX = 1 << 0,
+ SKBDESC_DMA_MAPPED_TX = 1 << 1,
+ FRAME_DESC_IV_STRIPPED = 1 << 2,
};
/**
* @desc: Pointer to descriptor part of the frame.
* Note that this pointer could point to something outside
* of the scope of the skb->data pointer.
+ * @iv: IV data used during encryption/decryption.
+ * @eiv: EIV data used during encryption/decryption.
* @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
* @entry: The entry to which this sk buffer belongs.
*/
unsigned int desc_len;
void *desc;
+ __le32 iv;
+ __le32 eiv;
+
dma_addr_t skb_dma;
struct queue_entry *entry;
* @size: Data size of the received frame.
* @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
* @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
-
+ * @cipher: Cipher type used during decryption.
+ * @cipher_status: Decryption status.
+ * @iv: IV data used during decryption.
+ * @eiv: EIV data used during decryption.
+ * @icv: ICV data used during decryption.
*/
struct rxdone_entry_desc {
u64 timestamp;
int size;
int flags;
int dev_flags;
+ u8 cipher;
+ u8 cipher_status;
+
+ __le32 iv;
+ __le32 eiv;
+ __le32 icv;
};
/**
* @ENTRY_TXD_BURST: This frame belongs to the same burst event.
* @ENTRY_TXD_ACK: An ACK is required for this frame.
* @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used.
+ * @ENTRY_TXD_ENCRYPT: This frame should be encrypted.
+ * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
+ * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
+ * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
*/
enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
ENTRY_TXD_BURST,
ENTRY_TXD_ACK,
ENTRY_TXD_RETRY_MODE,
+ ENTRY_TXD_ENCRYPT,
+ ENTRY_TXD_ENCRYPT_PAIRWISE,
+ ENTRY_TXD_ENCRYPT_IV,
+ ENTRY_TXD_ENCRYPT_MMIC,
};
/**
* @ifs: IFS value.
* @cw_min: cwmin value.
* @cw_max: cwmax value.
+ * @cipher: Cipher type used for encryption.
+ * @key_idx: Key index used for encryption.
+ * @iv_offset: Position where IV should be inserted by hardware.
*/
struct txentry_desc {
unsigned long flags;
short ifs;
short cw_min;
short cw_max;
+
+ enum cipher cipher;
+ u16 key_idx;
+ u16 iv_offset;
};
/**
}
/**
- * rt2x00_desc_read - Read a word from the hardware descriptor.
+ * _rt2x00_desc_read - Read a word from the hardware descriptor.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be read.
+ * @value: Address where the descriptor value should be written into.
+ */
+static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value)
+{
+ *value = desc[word];
+}
+
+/**
+ * rt2x00_desc_read - Read a word from the hardware descriptor, this
+ * function will take care of the byte ordering.
* @desc: Base descriptor address
* @word: Word index from where the descriptor should be read.
* @value: Address where the descriptor value should be written into.
*/
static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value)
{
- *value = le32_to_cpu(desc[word]);
+ __le32 tmp;
+ _rt2x00_desc_read(desc, word, &tmp);
+ *value = le32_to_cpu(tmp);
+}
+
+/**
+ * rt2x00_desc_write - write a word to the hardware descriptor, this
+ * function will take care of the byte ordering.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be written.
+ * @value: Value that should be written into the descriptor.
+ */
+static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value)
+{
+ desc[word] = value;
}
/**
- * rt2x00_desc_write - wrote a word to the hardware descriptor.
+ * rt2x00_desc_write - write a word to the hardware descriptor.
* @desc: Base descriptor address
* @word: Word index from where the descriptor should be written.
* @value: Value that should be written into the descriptor.
*/
static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value)
{
- desc[word] = cpu_to_le32(value);
+ _rt2x00_desc_write(desc, word, cpu_to_le32(value));
}
#endif /* RT2X00QUEUE_H */
#ifndef RT2X00REG_H
#define RT2X00REG_H
+/*
+ * RX crypto status
+ */
+enum rx_crypto {
+ RX_CRYPTO_SUCCESS = 0,
+ RX_CRYPTO_FAIL_ICV = 1,
+ RX_CRYPTO_FAIL_MIC = 2,
+ RX_CRYPTO_FAIL_KEY = 3,
+};
+
/*
* Antenna values
*/
*/
CIPHER_CKIP64 = 5,
CIPHER_CKIP128 = 6,
- CIPHER_TKIP_NO_MIC = 7,
+ CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */
+
+/*
+ * Max cipher type.
+ * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128
+ * are excluded due to limitations in mac80211.
+ */
+ CIPHER_MAX = 4,
};
/*
#include "rt2x00pci.h"
#include "rt61pci.h"
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
/*
* Register access.
* BBP and RF register require indirect register access,
/*
* Configuration handlers.
*/
+static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
+
+ return 0;
+}
+
+static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®);
+ reg |= (1 << crypto->bssidx);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+
+static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt61pci_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
* TX descriptor initialization
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct txentry_desc *txdesc)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
*/
static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
}
if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
- offset += 14;
-
if (lna == 3 || lna == 2)
offset += 10;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
static void rt61pci_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct queue_entry_priv_pci *entry_priv = entry->priv_data;
u32 word0;
u32 word1;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv);
+ _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
-static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
- /*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
+ }
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
- spec->tx_power_a = txpower;
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt61pci_probe_hw_mode(rt2x00dev);
+ retval = rt61pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware and DMA mapped skbs.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.write_beacon = rt61pci_write_beacon,
.kick_tx_queue = rt61pci_kick_tx_queue,
.fill_rxdone = rt61pci_fill_rxdone,
+ .config_shared_key = rt61pci_config_shared_key,
+ .config_pairwise_key = rt61pci_config_pairwise_key,
.config_filter = rt61pci_config_filter,
.config_intf = rt61pci_config_intf,
.config_erp = rt61pci_config_erp,
#define PAIRWISE_KEY_TABLE_BASE 0x1200
#define PAIRWISE_TA_TABLE_BASE 0x1a00
+#define SHARED_KEY_ENTRY(__idx) \
+ ( SHARED_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+ ( PAIRWISE_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+ ( PAIRWISE_TA_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
struct hw_pairwise_ta_entry {
u8 address[6];
- u8 reserved[2];
+ u8 cipher;
+ u8 reserved;
} __attribute__ ((packed));
/*
* SEC_CSR4: Pairwise key table lookup control.
*/
#define SEC_CSR4 0x30b0
+#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
/*
* SEC_CSR5: shared key table security mode register.
/*
* Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
*/
-#define RXD_W4_RESERVED FIELD32(0xffffffff)
+#define RXD_W4_ICV FIELD32(0xffffffff)
/*
* the above 20-byte is called RXINFO and will be DMAed to MAC RX block
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT61PCI_H */
#include "rt2x00usb.h"
#include "rt73usb.h"
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
/*
* Register access.
* All access to the CSR registers will go through the methods
/*
* Configuration handlers.
*/
+static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, ®);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR1, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR5, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR0, reg);
+
+ return 0;
+}
+
+static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * Send the address and cipher type to the hardware register.
+ * This data fits within the CSR cache size, so we can use
+ * rt73usb_register_multiwrite() directly.
+ */
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt73usb_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR4, ®);
+ reg |= (1 << crypto->bssidx);
+ rt73usb_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt73usb_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
* TX descriptor initialization
*/
static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct txentry_desc *txdesc)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
skb->len - skbdesc->desc_len);
rt2x00_set_field32(&word, TXD_W0_BURST2,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
*/
static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
else if (lna == 2)
offset += 8;
}
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
static void rt73usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd = (__le32 *)entry->skb->data;
u32 word0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
+ _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
};
-static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
- /*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
spec->channels = rf_vals_5225_2527;
}
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt73usb_probe_hw_mode(rt2x00dev);
+ retval = rt73usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.get_tx_data_len = rt73usb_get_tx_data_len,
.kick_tx_queue = rt73usb_kick_tx_queue,
.fill_rxdone = rt73usb_fill_rxdone,
+ .config_shared_key = rt73usb_config_shared_key,
+ .config_pairwise_key = rt73usb_config_pairwise_key,
.config_filter = rt73usb_config_filter,
.config_intf = rt73usb_config_intf,
.config_erp = rt73usb_config_erp,
#define PAIRWISE_KEY_TABLE_BASE 0x1200
#define PAIRWISE_TA_TABLE_BASE 0x1a00
+#define SHARED_KEY_ENTRY(__idx) \
+ ( SHARED_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+ ( PAIRWISE_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+ ( PAIRWISE_TA_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
struct hw_pairwise_ta_entry {
u8 address[6];
- u8 reserved[2];
+ u8 cipher;
+ u8 reserved;
} __attribute__ ((packed));
/*
* SEC_CSR4: Pairwise key table lookup control.
*/
#define SEC_CSR4 0x30b0
+#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
/*
* SEC_CSR5: shared key table security mode register.
/*
* Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
*/
-#define RXD_W4_RESERVED FIELD32(0xffffffff)
+#define RXD_W4_ICV FIELD32(0xffffffff)
/*
* the above 20-byte is called RXINFO and will be DMAed to MAC RX block
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT73USB_H */
#define ANAPARAM_PWR1_SHIFT 20
#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT)
-enum rtl8180_tx_desc_flags {
- RTL8180_TX_DESC_FLAG_NO_ENC = (1 << 15),
- RTL8180_TX_DESC_FLAG_TX_OK = (1 << 15),
- RTL8180_TX_DESC_FLAG_SPLCP = (1 << 16),
- RTL8180_TX_DESC_FLAG_RX_UNDER = (1 << 16),
- RTL8180_TX_DESC_FLAG_MOREFRAG = (1 << 17),
- RTL8180_TX_DESC_FLAG_CTS = (1 << 18),
- RTL8180_TX_DESC_FLAG_RTS = (1 << 23),
- RTL8180_TX_DESC_FLAG_LS = (1 << 28),
- RTL8180_TX_DESC_FLAG_FS = (1 << 29),
- RTL8180_TX_DESC_FLAG_DMA = (1 << 30),
- RTL8180_TX_DESC_FLAG_OWN = (1 << 31)
-};
-
struct rtl8180_tx_desc {
__le32 flags;
__le16 rts_duration;
u32 reserved[2];
} __attribute__ ((packed));
-enum rtl8180_rx_desc_flags {
- RTL8180_RX_DESC_FLAG_ICV_ERR = (1 << 12),
- RTL8180_RX_DESC_FLAG_CRC32_ERR = (1 << 13),
- RTL8180_RX_DESC_FLAG_PM = (1 << 14),
- RTL8180_RX_DESC_FLAG_RX_ERR = (1 << 15),
- RTL8180_RX_DESC_FLAG_BCAST = (1 << 16),
- RTL8180_RX_DESC_FLAG_PAM = (1 << 17),
- RTL8180_RX_DESC_FLAG_MCAST = (1 << 18),
- RTL8180_RX_DESC_FLAG_SPLCP = (1 << 25),
- RTL8180_RX_DESC_FLAG_FOF = (1 << 26),
- RTL8180_RX_DESC_FLAG_DMA_FAIL = (1 << 27),
- RTL8180_RX_DESC_FLAG_LS = (1 << 28),
- RTL8180_RX_DESC_FLAG_FS = (1 << 29),
- RTL8180_RX_DESC_FLAG_EOR = (1 << 30),
- RTL8180_RX_DESC_FLAG_OWN = (1 << 31)
-};
-
struct rtl8180_rx_desc {
__le32 flags;
__le32 flags2;
struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
u32 flags = le32_to_cpu(entry->flags);
- if (flags & RTL8180_RX_DESC_FLAG_OWN)
+ if (flags & RTL818X_RX_DESC_FLAG_OWN)
return;
- if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL |
- RTL8180_RX_DESC_FLAG_FOF |
- RTL8180_RX_DESC_FLAG_RX_ERR)))
+ if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
+ RTL818X_RX_DESC_FLAG_FOF |
+ RTL818X_RX_DESC_FLAG_RX_ERR)))
goto done;
else {
u32 flags2 = le32_to_cpu(entry->flags2);
rx_status.band = dev->conf.channel->band;
rx_status.mactime = le64_to_cpu(entry->tsft);
rx_status.flag |= RX_FLAG_TSFT;
- if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR)
+ if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
ieee80211_rx_irqsafe(dev, skb, &rx_status);
done:
entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
- entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
+ entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
MAX_RX_SIZE);
if (priv->rx_idx == 31)
- entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
+ entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
priv->rx_idx = (priv->rx_idx + 1) % 32;
}
}
struct ieee80211_tx_info *info;
u32 flags = le32_to_cpu(entry->flags);
- if (flags & RTL8180_TX_DESC_FLAG_OWN)
+ if (flags & RTL818X_TX_DESC_FLAG_OWN)
return;
ring->idx = (ring->idx + 1) % ring->entries;
memset(&info->status, 0, sizeof(info->status));
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (flags & RTL8180_TX_DESC_FLAG_TX_OK)
+ if (flags & RTL818X_TX_DESC_FLAG_TX_OK)
info->flags |= IEEE80211_TX_STAT_ACK;
else
info->status.excessive_retries = 1;
mapping = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
- tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS |
- RTL8180_TX_DESC_FLAG_LS |
+ tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
+ RTL818X_TX_DESC_FLAG_LS |
(ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
skb->len;
if (priv->r8185)
- tx_flags |= RTL8180_TX_DESC_FLAG_DMA |
- RTL8180_TX_DESC_FLAG_NO_ENC;
+ tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
+ RTL818X_TX_DESC_FLAG_NO_ENC;
if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
- tx_flags |= RTL8180_TX_DESC_FLAG_RTS;
+ tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
- tx_flags |= RTL8180_TX_DESC_FLAG_CTS;
+ tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
entry->rx_buf = cpu_to_le32(*mapping);
- entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
+ entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
MAX_RX_SIZE);
}
- entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
+ entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
return 0;
}
/* {rtl8187,rtl8187b}_tx_info is in skb */
-/* Tx flags are common between rtl8187 and rtl8187b */
-#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15)
-#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17)
-#define RTL8187_TX_FLAG_CTS (1 << 18)
-#define RTL8187_TX_FLAG_RTS (1 << 23)
-
struct rtl8187_tx_hdr {
__le32 flags;
__le16 rts_duration;
}
flags = skb->len;
- flags |= RTL8187_TX_FLAG_NO_ENCRYPT;
+ flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
- flags |= RTL8187_TX_FLAG_MORE_FRAG;
+ flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
- flags |= RTL8187_TX_FLAG_RTS;
+ flags |= RTL818X_TX_DESC_FLAG_RTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
rts_dur = ieee80211_rts_duration(dev, priv->vif,
skb->len, info);
} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
- flags |= RTL8187_TX_FLAG_CTS;
+ flags |= RTL818X_TX_DESC_FLAG_CTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
rx_status.flag |= RX_FLAG_TSFT;
- if (flags & (1 << 13))
+ if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
ieee80211_rx_irqsafe(dev, skb, &rx_status);
void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
};
+/* Tx/Rx flags are common between RTL818X chips */
+
+enum rtl818x_tx_desc_flags {
+ RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15),
+ RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15),
+ RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16),
+ RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16),
+ RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17),
+ RTL818X_TX_DESC_FLAG_CTS = (1 << 18),
+ RTL818X_TX_DESC_FLAG_RTS = (1 << 23),
+ RTL818X_TX_DESC_FLAG_LS = (1 << 28),
+ RTL818X_TX_DESC_FLAG_FS = (1 << 29),
+ RTL818X_TX_DESC_FLAG_DMA = (1 << 30),
+ RTL818X_TX_DESC_FLAG_OWN = (1 << 31)
+};
+
+enum rtl818x_rx_desc_flags {
+ RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12),
+ RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13),
+ RTL818X_RX_DESC_FLAG_PM = (1 << 14),
+ RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15),
+ RTL818X_RX_DESC_FLAG_BCAST = (1 << 16),
+ RTL818X_RX_DESC_FLAG_PAM = (1 << 17),
+ RTL818X_RX_DESC_FLAG_MCAST = (1 << 18),
+ RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */
+ RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */
+ RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25),
+ RTL818X_RX_DESC_FLAG_FOF = (1 << 26),
+ RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27),
+ RTL818X_RX_DESC_FLAG_LS = (1 << 28),
+ RTL818X_RX_DESC_FLAG_FS = (1 << 29),
+ RTL818X_RX_DESC_FLAG_EOR = (1 << 30),
+ RTL818X_RX_DESC_FLAG_OWN = (1 << 31)
+};
+
#endif /* RTL818X_H */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/firmware.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include "orinoco.h"
-static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
-static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
-
/********************************************************************/
/* Module stuff */
/********************************************************************/
static int spectrum_cs_config(struct pcmcia_device *link);
static void spectrum_cs_release(struct pcmcia_device *link);
-/********************************************************************/
-/* Firmware downloader */
-/********************************************************************/
-
-/* Position of PDA in the adapter memory */
-#define EEPROM_ADDR 0x3000
-#define EEPROM_LEN 0x200
-#define PDA_OFFSET 0x100
-
-#define PDA_ADDR (EEPROM_ADDR + PDA_OFFSET)
-#define PDA_WORDS ((EEPROM_LEN - PDA_OFFSET) / 2)
-
/* Constants for the CISREG_CCSR register */
#define HCR_RUN 0x07 /* run firmware after reset */
#define HCR_IDLE 0x0E /* don't run firmware after reset */
#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-/*
- * AUX port access. To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register. Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
-
-#define HERMES_AUX_PW0 0xFE01
-#define HERMES_AUX_PW1 0xDC23
-#define HERMES_AUX_PW2 0xBA45
-
-/* End markers */
-#define PDI_END 0x00000000 /* End of PDA */
-#define BLOCK_END 0xFFFFFFFF /* Last image block */
-#define TEXT_END 0x1A /* End of text header */
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore. Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
- __le32 addr; /* adapter address where to write the block */
- __le16 len; /* length of the data only, in bytes */
- char data[0]; /* data to be written */
-} __attribute__ ((packed));
-
-/*
- * Plug Data References are located in in the image after the last data
- * block. They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
- __le32 id; /* record ID */
- __le32 addr; /* adapter address where to write the data */
- __le32 len; /* expected length of the data, in bytes */
- char next[0]; /* next PDR starts here */
-} __attribute__ ((packed));
-
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware. They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
- __le16 len; /* length of ID and data, in words */
- __le16 id; /* record ID */
- char data[0]; /* plug data */
-} __attribute__ ((packed));
-
-
-/* Functions for access to little-endian data */
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
- return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
- return le16_to_cpu(blk->len);
-}
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->len);
-}
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
- return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
- return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-
-/* Set address of the auxiliary port */
-static inline void
-spectrum_aux_setaddr(hermes_t *hw, u32 addr)
-{
- hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
- hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-
-/* Open access to the auxiliary port */
-static int
-spectrum_aux_open(hermes_t *hw)
-{
- int i;
-
- /* Already open? */
- if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED)
- return 0;
-
- hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
- hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
- hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
- hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE);
-
- for (i = 0; i < 20; i++) {
- udelay(10);
- if (hermes_read_reg(hw, HERMES_CONTROL) ==
- HERMES_AUX_ENABLED)
- return 0;
- }
-
- return -EBUSY;
-}
-
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
return -ENODEV;
}
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static struct pdr *
-spectrum_find_pdr(struct pdr *first_pdr, u32 record_id)
-{
- struct pdr *pdr = first_pdr;
-
- while (pdr_id(pdr) != PDI_END) {
- /*
- * PDR area is currently not terminated by PDI_END.
- * It's followed by CRC records, which have the type
- * field where PDR has length. The type can be 0 or 1.
- */
- if (pdr_len(pdr) < 2)
- return NULL;
-
- /* If the record ID matches, we are done */
- if (pdr_id(pdr) == record_id)
- return pdr;
-
- pdr = (struct pdr *) pdr->next;
- }
- return NULL;
-}
-
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi)
-{
- struct pdr *pdr;
-
- /* Find the PDI corresponding to this PDR */
- pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi));
-
- /* No match is found, safe to ignore */
- if (!pdr)
- return 0;
-
- /* Lengths of the data in PDI and PDR must match */
- if (pdi_len(pdi) != pdr_len(pdr))
- return -EINVAL;
-
- /* do the actual plugging */
- spectrum_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
- return 0;
-}
-
-
-/* Read PDA from the adapter */
-static int
-spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len)
-{
- int ret;
- int pda_size;
-
- /* Issue command to read EEPROM */
- ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
- if (ret)
- return ret;
-
- /* Open auxiliary port */
- ret = spectrum_aux_open(hw);
- if (ret)
- return ret;
-
- /* read PDA from EEPROM */
- spectrum_aux_setaddr(hw, PDA_ADDR);
- hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2);
-
- /* Check PDA length */
- pda_size = le16_to_cpu(pda[0]);
- if (pda_size > pda_len)
- return -EINVAL;
-
- return 0;
-}
-
-
-/* Parse PDA and write the records into the adapter */
-static int
-spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block,
- __le16 *pda)
-{
- int ret;
- struct pdi *pdi;
- struct pdr *first_pdr;
- const struct dblock *blk = first_block;
-
- /* Skip all blocks to locate Plug Data References */
- while (dblock_addr(blk) != BLOCK_END)
- blk = (struct dblock *) &blk->data[dblock_len(blk)];
-
- first_pdr = (struct pdr *) blk;
-
- /* Go through every PDI and plug them into the adapter */
- pdi = (struct pdi *) (pda + 2);
- while (pdi_id(pdi) != PDI_END) {
- ret = spectrum_plug_pdi(hw, first_pdr, pdi);
- if (ret)
- return ret;
-
- /* Increment to the next PDI */
- pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
- }
- return 0;
-}
-
-
-/* Load firmware blocks into the adapter */
-static int
-spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
-{
- const struct dblock *blk;
- u32 blkaddr;
- u32 blklen;
-
- blk = first_block;
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
-
- while (dblock_addr(blk) != BLOCK_END) {
- spectrum_aux_setaddr(hw, blkaddr);
- hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
- blklen);
-
- blk = (struct dblock *) &blk->data[blklen];
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
- }
- return 0;
-}
-
-
-/*
- * Process a firmware image - stop the card, load the firmware, reset
- * the card and make sure it responds. For the secondary firmware take
- * care of the PDA - read it and then write it on top of the firmware.
- */
static int
-spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
- const unsigned char *image, int secondary)
+spectrum_cs_hard_reset(struct orinoco_private *priv)
{
- int ret;
- const unsigned char *ptr;
- const struct dblock *first_block;
-
- /* Plug Data Area (PDA) */
- __le16 pda[PDA_WORDS];
-
- /* Binary block begins after the 0x1A marker */
- ptr = image;
- while (*ptr++ != TEXT_END);
- first_block = (const struct dblock *) ptr;
-
- /* Read the PDA */
- if (secondary) {
- ret = spectrum_read_pda(hw, pda, sizeof(pda));
- if (ret)
- return ret;
- }
-
- /* Stop the firmware, so that it can be safely rewritten */
- ret = spectrum_reset(link, 1);
- if (ret)
- return ret;
-
- /* Program the adapter with new firmware */
- ret = spectrum_load_blocks(hw, first_block);
- if (ret)
- return ret;
-
- /* Write the PDA to the adapter */
- if (secondary) {
- ret = spectrum_apply_pda(hw, first_block, pda);
- if (ret)
- return ret;
- }
-
- /* Run the firmware */
- ret = spectrum_reset(link, 0);
- if (ret)
- return ret;
-
- /* Reset hermes chip and make sure it responds */
- ret = hermes_init(hw);
-
- /* hermes_reset() should return 0 with the secondary firmware */
- if (secondary && ret != 0)
- return -ENODEV;
+ struct orinoco_pccard *card = priv->card;
+ struct pcmcia_device *link = card->p_dev;
- /* And this should work with any firmware */
- if (!hermes_present(hw))
- return -ENODEV;
+ /* Soft reset using COR and HCR */
+ spectrum_reset(link, 0);
return 0;
}
-
-/*
- * Download the firmware into the card, this also does a PCMCIA soft
- * reset on the card, to make sure it's in a sane state.
- */
static int
-spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
-{
- int ret;
- const struct firmware *fw_entry;
-
- if (request_firmware(&fw_entry, primary_fw_name,
- &handle_to_dev(link)) != 0) {
- printk(KERN_ERR PFX "Cannot find firmware: %s\n",
- primary_fw_name);
- return -ENOENT;
- }
-
- /* Load primary firmware */
- ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
- release_firmware(fw_entry);
- if (ret) {
- printk(KERN_ERR PFX "Primary firmware download failed\n");
- return ret;
- }
-
- if (request_firmware(&fw_entry, secondary_fw_name,
- &handle_to_dev(link)) != 0) {
- printk(KERN_ERR PFX "Cannot find firmware: %s\n",
- secondary_fw_name);
- return -ENOENT;
- }
-
- /* Load secondary firmware */
- ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
- release_firmware(fw_entry);
- if (ret) {
- printk(KERN_ERR PFX "Secondary firmware download failed\n");
- }
-
- return ret;
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int
-spectrum_cs_hard_reset(struct orinoco_private *priv)
+spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
{
struct orinoco_pccard *card = priv->card;
struct pcmcia_device *link = card->p_dev;
- int err;
- if (!hermes_present(&priv->hw)) {
- /* The firmware needs to be reloaded */
- if (spectrum_dl_firmware(&priv->hw, link) != 0) {
- printk(KERN_ERR PFX "Firmware download failed\n");
- err = -ENODEV;
- }
- } else {
- /* Soft reset using COR and HCR */
- spectrum_reset(link, 0);
- }
-
- return 0;
+ return spectrum_reset(link, idle);
}
/********************************************************************/
struct orinoco_private *priv;
struct orinoco_pccard *card;
- dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
+ dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ spectrum_cs_hard_reset,
+ spectrum_cs_stop_firmware);
if (! dev)
return -ENOMEM;
priv = netdev_priv(dev);
dev->irq = link->irq.AssignedIRQ;
card->node.major = card->node.minor = 0;
- /* Reset card and download firmware */
+ /* Reset card */
if (spectrum_cs_hard_reset(priv) != 0) {
goto failed;
}
module_param(pc_debug, int, 0);
#define dprintk(n, format, args...) \
{ if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##args); }
+ printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
#else
#define dprintk(n, format, args...)
#endif
spin_unlock_irqrestore(&this->lock, flags);
rc = wait_event_interruptible(this->wait,
this->sig_pwr_mgmt_confirm.status != 255);
- printk(KERN_INFO "%s: %s status=%d\n", __FUNCTION__,
+ printk(KERN_INFO "%s: %s status=%d\n", __func__,
suspend ? "suspend" : "resume",
this->sig_pwr_mgmt_confirm.status);
goto out;
}
WL3501_NOPLOOP(10);
}
- printk(KERN_WARNING "%s: failed to reset the board!\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: failed to reset the board!\n", __func__);
rc = -ENODEV;
out:
return rc;
out:
return rc;
fail:
- printk(KERN_WARNING "%s: failed!\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: failed!\n", __func__);
goto out;
}
return sprintf(buf, "%s\n", ofdev->node->full_name);
}
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct of_device *ofdev;
+
+ ofdev = to_of_device(dev);
+ return sprintf(buf, "%s\n", ofdev->node->name);
+}
+
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct device_attribute of_platform_device_attrs[] = {
__ATTR_RO(devspec),
+ __ATTR_RO(name),
__ATTR_RO(modalias),
__ATTR_NULL
};
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
{
acpi_status status;
- acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+ acpi_handle chandle, handle;
struct pci_dev *pdev = dev;
struct pci_bus *parent;
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
* Per PCI firmware specification, we should run the ACPI _OSC
* method to get control of hotplug hardware before using it. If
* an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC and OSHP
- * within the scope of the hotplug controller and its parents,
+ * To handle different BIOS behavior, we look for _OSC on a root
+ * bridge preferentially (according to PCI fw spec). Later for
+ * OSHP within the scope of the hotplug controller and its parents,
* upto the host bridge under which this controller exists.
*/
+ handle = acpi_find_root_bridge_handle(pdev);
+ if (handle) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+ dbg("Trying to get hotplug control for %s\n",
+ (char *)string.pointer);
+ status = pci_osc_control_set(handle, flags);
+ if (ACPI_SUCCESS(status))
+ goto got_one;
+ kfree(string.pointer);
+ string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
+ }
+
+ pdev = dev;
+ handle = DEVICE_ACPI_HANDLE(&dev->dev);
while (!handle) {
/*
* This hotplug controller was not listed in the ACPI name
acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
dbg("Trying to get hotplug control for %s \n",
(char *)string.pointer);
- status = pci_osc_control_set(handle, flags);
- if (status == AE_NOT_FOUND)
- status = acpi_run_oshp(handle);
- if (ACPI_SUCCESS(status)) {
- dbg("Gained control for hotplug HW for pci %s (%s)\n",
- pci_name(dev), (char *)string.pointer);
- kfree(string.pointer);
- return 0;
- }
+ status = acpi_run_oshp(handle);
+ if (ACPI_SUCCESS(status))
+ goto got_one;
if (acpi_root_bridge(handle))
break;
chandle = handle;
kfree(string.pointer);
return -ENODEV;
+got_one:
+ dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev),
+ (char *)string.pointer);
+ kfree(string.pointer);
+ return 0;
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
if (acpi_pci_disabled)
return -1;
- /* Find root host bridge */
- while (pdev->bus->self)
- pdev = pdev->bus->self;
- handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(pdev->bus), pdev->bus->number);
-
+ handle = acpi_find_root_bridge_handle(pdev);
if (handle) {
pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
status = pci_osc_control_set(handle,
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
+ printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
+ printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
+ printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
}
}
}
EXPORT_SYMBOL(pci_bus_assign_resources);
+static void pci_bus_dump_res(struct pci_bus *bus)
+{
+ int i;
+
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+ struct resource *res = bus->resource[i];
+ if (!res)
+ continue;
+
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ }
+}
+
+static void pci_bus_dump_resources(struct pci_bus *bus)
+{
+ struct pci_bus *b;
+ struct pci_dev *dev;
+
+
+ pci_bus_dump_res(bus);
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ b = dev->subordinate;
+ if (!b)
+ continue;
+
+ pci_bus_dump_resources(b);
+ }
+}
+
void __init
pci_assign_unassigned_resources(void)
{
pci_bus_assign_resources(bus);
pci_enable_bridges(bus);
}
+
+ /* dump the resource on buses */
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ pci_bus_dump_resources(bus);
+ }
}
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+ if (ret)
+ goto err5;
+
+ skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+ return ret;
}
static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
}
static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
platform_device_unregister(palmtx_pcmcia_device);
}
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
module_exit(palmtx_pcmcia_exit);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BLACKFIN
+ depends on BLACKFIN && !BF561
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.
return IRQ_NONE;
}
-static int bfin_rtc_open(struct device *dev)
-{
- int ret;
-
- dev_dbg_stamp(dev);
-
- ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
- if (!ret)
- bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
-
- return ret;
-}
-
-static void bfin_rtc_release(struct device *dev)
-{
- dev_dbg_stamp(dev);
- bfin_rtc_reset(dev, 0);
- free_irq(IRQ_RTC, dev);
-}
-
static void bfin_rtc_int_set(u16 rtc_int)
{
bfin_write_RTC_ISTAT(rtc_int);
}
static struct rtc_class_ops bfin_rtc_ops = {
- .open = bfin_rtc_open,
- .release = bfin_rtc_release,
.ioctl = bfin_rtc_ioctl,
.read_time = bfin_rtc_read_time,
.set_time = bfin_rtc_set_time,
static int __devinit bfin_rtc_probe(struct platform_device *pdev)
{
struct bfin_rtc *rtc;
+ struct device *dev = &pdev->dev;
int ret = 0;
+ unsigned long timeout;
- dev_dbg_stamp(&pdev->dev);
+ dev_dbg_stamp(dev);
+ /* Allocate memory for our RTC struct */
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
if (unlikely(!rtc))
return -ENOMEM;
+ platform_set_drvdata(pdev, rtc);
+ device_init_wakeup(dev, 1);
- rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc->rtc_dev);
+ /* Grab the IRQ and init the hardware */
+ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
+ if (unlikely(ret))
goto err;
- }
-
- /* see comment at top of file about stopwatch/PIE */
+ /* sometimes the bootloader touched things, but the write complete was not
+ * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+ */
+ timeout = jiffies + HZ;
+ while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+ if (time_after(jiffies, timeout))
+ break;
+ bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
bfin_write_RTC_SWCNT(0);
- platform_set_drvdata(pdev, rtc);
-
- device_init_wakeup(&pdev->dev, 1);
+ /* Register our RTC with the RTC framework */
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
+ if (unlikely(IS_ERR(rtc))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err_irq;
+ }
return 0;
+ err_irq:
+ free_irq(IRQ_RTC, dev);
err:
kfree(rtc);
return ret;
static int __devexit bfin_rtc_remove(struct platform_device *pdev)
{
struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ bfin_rtc_reset(dev, 0);
+ free_irq(IRQ_RTC, dev);
rtc_device_unregister(rtc->rtc_dev);
platform_set_drvdata(pdev, NULL);
kfree(rtc);
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
case RTC_UIE_OFF:
+ mutex_unlock(&rtc->ops_lock);
clear_uie(rtc);
- break;
+ return 0;
case RTC_UIE_ON:
+ mutex_unlock(&rtc->ops_lock);
err = set_uie(rtc);
+ return err;
#endif
default:
err = -ENOTTY;
int cr, sr;
int ret = 0;
- if (client->irq < 0)
+ if (client->irq <= 0)
return -EINVAL;
mutex_lock(&ds1374->mutex);
int cr;
int ret = 0;
- if (client->irq < 0)
+ if (client->irq <= 0)
return -EINVAL;
ret = ds1374_read_time(dev, &now);
if (ret)
goto out_free;
- if (client->irq >= 0) {
+ if (client->irq > 0) {
ret = request_irq(client->irq, ds1374_irq, 0,
"ds1374", client);
if (ret) {
return 0;
out_irq:
- if (client->irq >= 0)
+ if (client->irq > 0)
free_irq(client->irq, client);
out_free:
{
struct ds1374 *ds1374 = i2c_get_clientdata(client);
- if (client->irq >= 0) {
+ if (client->irq > 0) {
mutex_lock(&ds1374->mutex);
ds1374->exiting = 1;
mutex_unlock(&ds1374->mutex);
if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
return SCSI_DH_NOSYS;
- h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
+ h->lun = inqp->lun[7]; /* Uses only the last byte */
}
return err;
}
int err;
struct c9_inquiry *inqp;
+ h->lun_state = RDAC_LUN_UNOWNED;
err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
if (err == SCSI_DH_OK) {
inqp = &h->inq.c9;
/**
* ibmvfc_init_host - Start host initialization
* @vhost: ibmvfc host struct
+ * @relogin: is this a re-login?
*
* Return value:
* nothing
**/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
{
struct ibmvfc_target *tgt;
}
if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+ if (!relogin) {
+ memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+ vhost->async_crq.cur = 0;
+ }
+
list_for_each_entry(tgt, &vhost->targets, queue)
tgt->need_login = 1;
scsi_block_requests(vhost->host);
static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
{
long timeout = wait_event_timeout(vhost->init_wait_q,
- (vhost->state == IBMVFC_ACTIVE ||
- vhost->state == IBMVFC_HOST_OFFLINE ||
- vhost->state == IBMVFC_LINK_DEAD),
+ ((vhost->state == IBMVFC_ACTIVE ||
+ vhost->state == IBMVFC_HOST_OFFLINE ||
+ vhost->state == IBMVFC_LINK_DEAD) &&
+ vhost->action == IBMVFC_HOST_ACTION_NONE),
(init_timeout * HZ));
return timeout ? 0 : -EIO;
struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
struct scsi_cmnd *cmnd = evt->cmnd;
- int rsp_len = 0;
- int sense_len = rsp->fcp_sense_len;
+ u32 rsp_len = 0;
+ u32 sense_len = rsp->fcp_sense_len;
if (cmnd) {
if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
rsp_len = rsp->fcp_rsp_len;
if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
- if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
+ if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
ibmvfc_log_error(evt);
{
const char *desc = ibmvfc_get_ae_desc(crq->event);
- ibmvfc_log(vhost, 3, "%s event received\n", desc);
+ ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
+ " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
switch (crq->event) {
case IBMVFC_AE_LINK_UP:
case IBMVFC_AE_RESUME:
vhost->events_to_log |= IBMVFC_AE_LINKUP;
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_FABRIC:
vhost->events_to_log |= IBMVFC_AE_RSCN;
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_NPORT:
case IBMVFC_AE_SCN_GROUP:
/* Send back a response */
rc = ibmvfc_send_crq_init_complete(vhost);
if (rc == 0)
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 0);
else
dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
break;
case IBMVFC_CRQ_INIT_COMPLETE:
dev_info(vhost->dev, "Partner initialization complete\n");
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 0);
break;
default:
dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
mad->buffer.va = vhost->login_buf_dma;
mad->buffer.len = sizeof(*vhost->login_buf);
- memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
- vhost->async_crq.cur = 0;
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
if (!ibmvfc_send_event(evt, vhost, default_timeout))
}
}
- if (vhost->reinit) {
+ if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
vhost->reinit = 0;
+ scsi_block_requests(vhost->host);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
} else {
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
-#define IBMVFC_DRIVER_VERSION "1.0.1"
-#define IBMVFC_DRIVER_DATE "(July 11, 2008)"
+#define IBMVFC_DRIVER_VERSION "1.0.2"
+#define IBMVFC_DRIVER_DATE "(August 14, 2008)"
#define IBMVFC_DEFAULT_TIMEOUT 15
#define IBMVFC_INIT_TIMEOUT 30
unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
/* add io space for sg data */
- desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+ desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
IBMVSCSI_CMDS_PER_LUN_DEFAULT);
return desired_io;
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.20-rc1
+ * Version : v00.00.04.01-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
/* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+ /* gen2*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+ /* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
*/
writel(status, ®s->outbound_intr_status);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
return 0;
}
*/
writel(status, ®s->outbound_doorbell_clear);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_doorbell_clear);
+
return 0;
}
/**
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
};
+/**
+* The following functions are defined for gen2 (deviceid : 0x78 0x79)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ /* write ~0x00000005 (4 & 1) to the intr mask*/
+ writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+ return 1;
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_doorbell_clear);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
+ return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+ .fire_cmd = megasas_fire_cmd_gen2,
+ .enable_intr = megasas_enable_intr_gen2,
+ .disable_intr = megasas_disable_intr_gen2,
+ .clear_intr = megasas_clear_intr_gen2,
+ .read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
/**
* This is the end of set of functions & definitions
* specific to ppc (deviceid : 0x60) controllers
/*
* Map the message registers
*/
- instance->base_addr = pci_resource_start(instance->pdev, 0);
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+ instance->base_addr = pci_resource_start(instance->pdev, 1);
+ } else {
+ instance->base_addr = pci_resource_start(instance->pdev, 0);
+ }
if (pci_request_regions(instance->pdev, "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
case PCI_DEVICE_ID_LSI_SAS1078DE:
instance->instancet = &megasas_instance_template_ppc;
break;
+ case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+ case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+ instance->instancet = &megasas_instance_template_gen2;
+ break;
case PCI_DEVICE_ID_LSI_SAS1064R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
{
struct megasas_instance *instance = pci_get_drvdata(pdev);
megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
}
/**
return retval;
}
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
megasas_sysfs_set_dbg_lvl);
static ssize_t
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.03.20-rc1"
-#define MEGASAS_RELDATE "March 10, 2008"
-#define MEGASAS_EXT_VERSION "Mon. March 10 11:02:31 PDT 2008"
+#define MEGASAS_VERSION "00.00.04.01"
+#define MEGASAS_RELDATE "July 24, 2008"
+#define MEGASAS_EXT_VERSION "Thu July 24 11:41:51 PST 2008"
/*
* Device IDs
#define PCI_DEVICE_ID_LSI_SAS1078R 0x0060
#define PCI_DEVICE_ID_LSI_SAS1078DE 0x007C
#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413
+#define PCI_DEVICE_ID_LSI_SAS1078GEN2 0x0078
+#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
/*
* =====================================
#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10)
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK (0x00000001 | 0x00000004)
/*
* register set for both 1068 and 1078 controllers
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ /*
+ * At this point all fcport's software-states are cleared. Perform any
+ * final cleanup of firmware resources (PCBs and XCBs).
+ */
+ if (fcport->loop_id != FC_NO_LOOP_ID) {
+ fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ fcport->loop_id = FC_NO_LOOP_ID;
+ }
+
qla2x00_abort_fcport_cmds(fcport);
scsi_target_unblock(&rport->dev);
}
#define REGISTER_FDMI_NEEDED 26
#define FCPORT_UPDATE_NEEDED 27
#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
+#define UNLOADING 29
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
&ha->fw_attributes, &ha->fw_memory_size);
qla2x00_resize_request_q(ha);
ha->flags.npiv_supported = 0;
- if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
- (ha->fw_attributes & BIT_2)) {
+ if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
+ IS_QLA84XX(ha)) &&
+ (ha->fw_attributes & BIT_2)) {
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
((ha->max_npiv_vports + 1) %
{
int rval;
uint8_t status = 0;
+ scsi_qla_host_t *vha;
if (ha->flags.online) {
ha->flags.online = 0;
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(ha, 0);
+ list_for_each_entry(vha, &ha->vp_list, vp_list)
+ qla2x00_mark_all_devices_lost(vha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
- sp->ha->status_srb = sp;
+ sp->fcport->ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
- "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
- cp->device->id, cp->device->lun, cp, cp->serial_number));
+ "cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
+ cp->device->channel, cp->device->id, cp->device->lun, cp,
+ cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
atomic_read(&fcport->state)));
cp->result = DID_BUS_BUSY << 16;
- if (atomic_read(&fcport->state) == FCS_ONLINE) {
- qla2x00_mark_device_lost(ha, fcport, 1, 1);
- }
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
case CS_RESET:
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
- qla2x00_mark_device_lost(ha, fcport, 1, 1);
+ qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
default:
set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
- wake_up_process(ha->dpc_thread);
+ qla2xxx_wake_dpc(ha);
}
}
sp = pha->outstanding_cmds[cnt];
if (!sp)
continue;
- if (ha->vp_idx != sp->ha->vp_idx)
+
+ if (ha->vp_idx != sp->fcport->ha->vp_idx)
continue;
match = 0;
switch (type) {
sp = ha->outstanding_cmds[cnt];
if (sp) {
ha->outstanding_cmds[cnt] = NULL;
- sp->flags = 0;
sp->cmd->result = res;
- sp->cmd->host_scribble = (unsigned char *)NULL;
qla2x00_sp_compl(ha, sp);
}
}
static void
qla2x00_remove_one(struct pci_dev *pdev)
{
- scsi_qla_host_t *ha;
+ scsi_qla_host_t *ha, *vha, *temp;
ha = pci_get_drvdata(pdev);
+ list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
+ fc_vport_terminate(vha->fc_vport);
+
+ set_bit(UNLOADING, &ha->dpc_flags);
+
qla2x00_dfs_remove(ha);
qla84xx_put_chip(ha);
void
qla2xxx_wake_dpc(scsi_qla_host_t *ha)
{
- if (ha->dpc_thread)
- wake_up_process(ha->dpc_thread);
+ struct task_struct *t = ha->dpc_thread;
+
+ if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
+ wake_up_process(t);
}
/*
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k6"
+#define QLA2XXX_VERSION "8.02.01-k7"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on ARM && PLAT_S3C24XX
+ select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
* Companion function to spi_alloc_device. Devices allocated with
* spi_alloc_device can be added onto the spi bus with this function.
*
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
*/
int spi_add_device(struct spi_device *spi)
{
+ static DEFINE_MUTEX(spi_add_lock);
struct device *dev = spi->master->dev.parent;
int status;
"%s.%u", spi->master->dev.bus_id,
spi->chip_select);
- /* drivers may modify this initial i/o setup */
+
+ /* We need to make sure there's no other device with this
+ * chipselect **BEFORE** we call setup(), else we'll trash
+ * its configuration. Lock against concurrent add() calls.
+ */
+ mutex_lock(&spi_add_lock);
+
+ if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+ != NULL) {
+ dev_err(dev, "chipselect %d already in use\n",
+ spi->chip_select);
+ status = -EBUSY;
+ goto done;
+ }
+
+ /* Drivers may modify this initial i/o setup, but will
+ * normally rely on the device being setup. Devices
+ * using SPI_CS_HIGH can't coexist well otherwise...
+ */
status = spi->master->setup(spi);
if (status < 0) {
dev_err(dev, "can't %s %s, status %d\n",
"setup", spi->dev.bus_id, status);
- return status;
+ goto done;
}
- /* driver core catches callers that misbehave by defining
- * devices that already exist.
- */
+ /* Device may be bound to an active driver when this returns */
status = device_add(&spi->dev);
- if (status < 0) {
+ if (status < 0)
dev_err(dev, "can't %s %s, status %d\n",
"add", spi->dev.bus_id, status);
- return status;
- }
+ else
+ dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
- dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
- return 0;
+done:
+ mutex_unlock(&spi_add_lock);
+ return status;
}
EXPORT_SYMBOL_GPL(spi_add_device);
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct bfin_bf54xfb_info *info = fbinfo->par;
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
disable_dma(CH_EPPI0);
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_bf54xfb_info *info = fbinfo->par;
- enable_dma(CH_EPPI0);
- bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ if (info->lq043_open_cnt) {
+
+ bfin_write_EPPI0_CONTROL(0);
+ SSYNC();
+
+ config_dma(info);
+ config_ppi(info);
+
+ /* start dma */
+ enable_dma(CH_EPPI0);
+ bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ }
return 0;
}
.page_mkwrite = fb_deferred_io_mkwrite,
};
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+ if (!PageDirty(page))
+ SetPageDirty(page);
+ return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+ .set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
vma->vm_ops = &fb_deferred_io_vm_ops;
}
EXPORT_SYMBOL_GPL(fb_deferred_io_init);
+void fb_deferred_io_open(struct fb_info *info,
+ struct inode *inode,
+ struct file *file)
+{
+ file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
void fb_deferred_io_cleanup(struct fb_info *info)
{
void *screen_base = (void __force *) info->screen_base;
if (res)
module_put(info->fbops->owner);
}
+#ifdef CONFIG_FB_DEFERRED_IO
+ if (info->fbdefio)
+ fb_deferred_io_open(info, inode, file);
+#endif
out:
unlock_kernel();
return res;
base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
+ if (mfbi->x_aoi_d < 0)
+ mfbi->x_aoi_d = 0;
+ if (mfbi->y_aoi_d < 0)
+ mfbi->y_aoi_d = 0;
switch (index) {
case 0:
if (mfbi->x_aoi_d != 0)
info->fix.smem_len = 0;
}
+/*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+
+ /* AOI should not be greater than display size */
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+ ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+ return 0;
+}
+
/*
* Using the fb_var_screeninfo in fb_info we set the resolution of this
* particular framebuffer. This function alters the fb_fix_screeninfo stored
diu_ops.get_pixel_format(var->bits_per_pixel,
machine_data->monitor_port);
ad->addr = cpu_to_le32(info->fix.smem_start);
- ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
- var->xres) | mfbi->g_alpha;
- /* fix me. AOI should not be greater than display size */
+ ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+ var->xres_virtual) | mfbi->g_alpha;
+ /* AOI should not be greater than display size */
ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
- ad->offset_xyi = 0;
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
/* Disable chroma keying function */
else
info->var.vmode &= ~FB_VMODE_YWRAP;
+ fsl_diu_set_aoi(info);
+
return 0;
}
pr_debug("set AOI display offset of index %d to (%d,%d)\n",
mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
fsl_diu_check_var(&info->var, info);
- fsl_diu_set_par(info);
+ fsl_diu_set_aoi(info);
break;
case MFB_GET_AOID:
aoi_d.x_aoi_d = mfbi->x_aoi_d;
release_mem_region(fix->mmio_start, fix->mmio_len);
pci_set_drvdata(pdev, NULL);
+ fb_dealloc_cmap(&info->cmap);
kfree(info->pixmap.addr);
kfree(info);
}
pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
- pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+ if ((lccr0 & LCCR0_PAS) == 0)
+ pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
}
static void pxafb_enable_controller(struct pxafb_info *fbi)
if (lcd_conn == LCD_MONO_STN_8BPP)
fbi->lccr0 |= LCCR0_DPD;
+ fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
#define pxafb_setup_options() (0)
#endif
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
- struct pxafb_info *fbi;
- struct pxafb_mach_info *inf;
- struct resource *r;
- int irq, ret;
-
- dev_dbg(&dev->dev, "pxafb_probe\n");
-
- inf = dev->dev.platform_data;
- ret = -ENOMEM;
- fbi = NULL;
- if (!inf)
- goto failed;
-
- ret = pxafb_parse_options(&dev->dev, g_options);
- if (ret < 0)
- goto failed;
-
#ifdef DEBUG_VAR
- /* Check for various illegal bit-combinations. Currently only
- * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+ struct pxafb_mach_info *inf)
+{
+ if (inf->lcd_conn)
+ return;
if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR0 setting contains "
+ dev_warn(dev, "machine LCCR0 setting contains "
"illegal bits: %08x\n",
inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR3 setting contains "
+ dev_warn(dev, "machine LCCR3 setting contains "
"illegal bits: %08x\n",
inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
if (inf->lccr0 & LCCR0_DPD &&
((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
(inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
(inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
- dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+ dev_warn(dev, "Double Pixel Data (DPD) mode is "
"only valid in passive mono"
" single panel mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
(inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
- dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+ dev_warn(dev, "Dual panel only valid in passive mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
(inf->modes->upper_margin || inf->modes->lower_margin))
- dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+ dev_warn(dev, "Upper and lower margins must be 0 in "
"passive mode\n");
+}
+#else
+#define pxafb_check_options(...) do {} while (0)
#endif
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+ struct pxafb_info *fbi;
+ struct pxafb_mach_info *inf;
+ struct resource *r;
+ int irq, ret;
+
+ dev_dbg(&dev->dev, "pxafb_probe\n");
+
+ inf = dev->dev.platform_data;
+ ret = -ENOMEM;
+ fbi = NULL;
+ if (!inf)
+ goto failed;
+
+ ret = pxafb_parse_options(&dev->dev, g_options);
+ if (ret < 0)
+ goto failed;
+
+ pxafb_check_options(&dev->dev, inf);
+
dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
inf->modes->xres,
inf->modes->yres,
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+ info->var.width = cfg->lcd_size_cfg.width;
+ info->var.height = cfg->lcd_size_cfg.height;
info->var.activate = FB_ACTIVATE_NOW;
error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
if (error)
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
-
- return 0;
}
static int s3c2410wdt_set_heartbeat(int timeout)
/* Stash our initial stack pointer into the mm structure */
current->mm->start_stack = (unsigned long )sp;
-
+#ifdef FLAT_PLAT_INIT
+ FLAT_PLAT_INIT(regs);
+#endif
DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
(int)regs, (int)start_addr, (int)current->mm->start_stack);
if (bprm->misc_bang)
goto _ret;
- bprm->misc_bang = 1;
-
/* to keep locking time low, we copy the interpreter string */
read_lock(&entries_lock);
fmt = check_file(bprm);
if (retval < 0)
goto _error;
+ bprm->misc_bang = 1;
+
retval = search_binary_handler (bprm, regs);
if (retval < 0)
goto _error;
if (inode)
iput(inode);
+ cifs_umount(sb, cifs_sb);
+
out_mount_failed:
if (cifs_sb) {
#ifdef CONFIG_CIFS_DFS_UPCALL
inode->i_fop = &simple_dir_operations;
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
+ } else if (rc) {
_FreeXid(xid);
iget_failed(inode);
return ERR_PTR(rc);
static int cramfs_iget5_test(struct inode *inode, void *opaque)
{
struct cramfs_inode *cramfs_inode = opaque;
-
- if (inode->i_ino != CRAMINO(cramfs_inode))
- return 0; /* does not match */
-
- if (inode->i_ino != 1)
- return 1;
-
- /* all empty directories, char, block, pipe, and sock, share inode #1 */
-
- if ((inode->i_mode != cramfs_inode->mode) ||
- (inode->i_gid != cramfs_inode->gid) ||
- (inode->i_uid != cramfs_inode->uid))
- return 0; /* does not match */
-
- if ((S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) &&
- (inode->i_rdev != old_decode_dev(cramfs_inode->size)))
- return 0; /* does not match */
-
- return 1; /* matches */
+ return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
}
static int cramfs_iget5_set(struct inode *inode, void *opaque)
{
- static struct timespec zerotime;
struct cramfs_inode *cramfs_inode = opaque;
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
inode->i_ino = CRAMINO(cramfs_inode);
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- inode->i_size = 0;
- inode->i_blocks = 0;
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
- }
return 0;
}
struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
cramfs_iget5_test, cramfs_iget5_set,
cramfs_inode);
+ static struct timespec zerotime;
+
if (inode && (inode->i_state & I_NEW)) {
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ inode->i_size = 0;
+ inode->i_blocks = 0;
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
unlock_new_inode(inode);
}
return inode;
}
+static void cramfs_drop_inode(struct inode *inode)
+{
+ if (inode->i_ino == 1)
+ generic_delete_inode(inode);
+ else
+ generic_drop_inode(inode);
+}
+
/*
* We have our own block cache: don't fill up the buffer cache
* with the rom-image, because the way the filesystem is set
.put_super = cramfs_put_super,
.remount_fs = cramfs_remount,
.statfs = cramfs_statfs,
+ .drop_inode = cramfs_drop_inode,
};
static int cramfs_get_sb(struct file_system_type *fs_type,
struct buffer_head *bh;
struct msdos_dir_entry *raw_entry;
loff_t i_pos;
- int err = 0;
+ int err;
retry:
i_pos = MSDOS_I(inode)->i_pos;
if (inode->i_ino == MSDOS_ROOT_INO || !i_pos)
return 0;
- lock_super(sb);
bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits);
if (!bh) {
printk(KERN_ERR "FAT: unable to read inode block "
"for updating (i_pos %lld)\n", i_pos);
- err = -EIO;
- goto out;
+ return -EIO;
}
spin_lock(&sbi->inode_hash_lock);
if (i_pos != MSDOS_I(inode)->i_pos) {
spin_unlock(&sbi->inode_hash_lock);
brelse(bh);
- unlock_super(sb);
goto retry;
}
}
spin_unlock(&sbi->inode_hash_lock);
mark_buffer_dirty(bh);
+ err = 0;
if (wait)
err = sync_dirty_buffer(bh);
brelse(bh);
-out:
- unlock_super(sb);
return err;
}
mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE);
mapping->assoc_mapping = NULL;
mapping->backing_dev_info = &default_backing_dev_info;
+ mapping->writeback_index = 0;
/*
* If the block_device provides a backing_dev_info for client
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
ret = set_task_ioprio(p, ioprio);
if (ret)
break;
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
tmpio = get_task_ioprio(p);
if (tmpio < 0)
continue;
ret = tmpio;
else
ret = ioprio_best(ret, tmpio);
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
struct buffer_head *bh;
struct omfs_sb_info *sbi = OMFS_SB(sb);
int bits_per_entry = 8 * sb->s_blocksize;
- int map, bit;
+ unsigned int map, bit;
int ret = 0;
u64 tmp;
struct omfs_sb_info *sbi = OMFS_SB(sb);
int bits_per_entry = 8 * sb->s_blocksize;
u64 tmp;
- int map, bit, ret;
+ unsigned int map, bit;
+ int ret;
tmp = block;
bit = do_div(tmp, bits_per_entry);
return err ? -EIO : 0;
}
+static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
+{
+ return (sbi->s_sys_blocksize - offset -
+ sizeof(struct omfs_extent)) /
+ sizeof(struct omfs_extent_entry) + 1;
+}
+
void omfs_make_empty_table(struct buffer_head *bh, int offset)
{
struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
struct buffer_head *bh;
u64 next, last;
u32 extent_count;
+ u32 max_extents;
int ret;
/* traverse extent table, freeing each entry that is greater
goto out;
oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
for (;;) {
- if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) {
- brelse(bh);
- goto out;
- }
+ if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+ goto out_brelse;
extent_count = be32_to_cpu(oe->e_extent_count);
+
+ if (extent_count > max_extents)
+ goto out_brelse;
+
last = next;
next = be64_to_cpu(oe->e_next);
entry = &oe->e_entry;
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
}
ret = 0;
out:
return ret;
+out_brelse:
+ brelse(bh);
+ return ret;
}
static void omfs_truncate(struct inode *inode)
goto out;
}
}
- max_count = (sbi->s_sys_blocksize - OMFS_EXTENT_START -
- sizeof(struct omfs_extent)) /
- sizeof(struct omfs_extent_entry) + 1;
+ max_count = omfs_max_extents(sbi, OMFS_EXTENT_START);
/* TODO: add a continuation block here */
if (be32_to_cpu(oe->e_extent_count) > max_count-1)
sector_t next, offset;
int ret;
u64 new_block;
+ u32 max_extents;
int extent_count;
struct omfs_extent *oe;
struct omfs_extent_entry *entry;
goto out;
oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
next = inode->i_ino;
for (;;) {
next = be64_to_cpu(oe->e_next);
entry = &oe->e_entry;
+ if (extent_count > max_extents)
+ goto out_brelse;
+
offset = find_block(inode, entry, block, extent_count, &remain);
if (offset > 0) {
ret = 0;
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
}
if (create) {
ret = omfs_grow_extent(inode, oe, &new_block);
inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask);
inode->i_op = &omfs_dir_inops;
inode->i_fop = &omfs_dir_operations;
- inode->i_size = be32_to_cpu(oi->i_head.h_body_size) +
- sizeof(struct omfs_header);
+ inode->i_size = sbi->s_sys_blocksize;
inc_nlink(inode);
break;
case OMFS_FILE:
}
seq_printf(m,
- "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+ "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
vma->vm_start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
- vma->vm_pgoff << PAGE_SHIFT,
+ ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
MAJOR(dev), MINOR(dev), ino, &len);
if (file) {
ino = inode->i_ino;
}
- seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+ seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
vma->vm_start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? 's' : 'p',
- vma->vm_pgoff << PAGE_SHIFT,
+ ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
MAJOR(dev), MINOR(dev), ino, &len);
/*
idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx;
- /* And make sure we have twice the index size of space reserved */
- idx_size <<= 1;
+ /* And make sure we have thrice the index size of space reserved */
+ idx_size = idx_size + (idx_size << 1);
/*
* We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes'
* This function makes sure UBIFS has enough free eraseblocks for index growth
* and data.
*
- * When budgeting index space, UBIFS reserves twice as more LEBs as the index
+ * When budgeting index space, UBIFS reserves thrice as many LEBs as the index
* would take if it was consolidated and written to the flash. This guarantees
* that the "in-the-gaps" commit method always succeeds and UBIFS will always
* be able to commit dirty index. So this function basically adds amount of
- * budgeted index space to the size of the current index, multiplies this by 2,
+ * budgeted index space to the size of the current index, multiplies this by 3,
* and makes sure this does not exceed the amount of free eraseblocks.
*
* Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables:
int err, idx_growth, data_growth, dd_growth;
struct retries_info ri;
+ ubifs_assert(req->new_page <= 1);
+ ubifs_assert(req->dirtied_page <= 1);
+ ubifs_assert(req->new_dent <= 1);
+ ubifs_assert(req->mod_dent <= 1);
+ ubifs_assert(req->new_ino <= 1);
+ ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
ubifs_assert(req->dirtied_ino <= 4);
ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+ ubifs_assert(!(req->new_ino_d & 7));
+ ubifs_assert(!(req->dirtied_ino_d & 7));
data_growth = calc_data_growth(c, req);
dd_growth = calc_dd_growth(c, req);
*/
void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
{
+ ubifs_assert(req->new_page <= 1);
+ ubifs_assert(req->dirtied_page <= 1);
+ ubifs_assert(req->new_dent <= 1);
+ ubifs_assert(req->mod_dent <= 1);
+ ubifs_assert(req->new_ino <= 1);
+ ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
ubifs_assert(req->dirtied_ino <= 4);
ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+ ubifs_assert(!(req->new_ino_d & 7));
+ ubifs_assert(!(req->dirtied_ino_d & 7));
if (!req->recalculate) {
ubifs_assert(req->idx_growth >= 0);
ubifs_assert(req->data_growth >= 0);
ubifs_assert(c->budg_idx_growth >= 0);
ubifs_assert(c->budg_data_growth >= 0);
+ ubifs_assert(c->budg_dd_growth >= 0);
ubifs_assert(c->min_idx_lebs < c->main_lebs);
+ ubifs_assert(!(c->budg_idx_growth & 7));
+ ubifs_assert(!(c->budg_data_growth & 7));
+ ubifs_assert(!(c->budg_dd_growth & 7));
spin_unlock(&c->space_lock);
}
void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
struct ubifs_inode *ui)
{
- struct ubifs_budget_req req = {.dd_growth = c->inode_budget,
- .dirtied_ino_d = ui->data_len};
+ struct ubifs_budget_req req;
+ memset(&req, 0, sizeof(struct ubifs_budget_req));
+ req.dd_growth = c->inode_budget + ALIGN(ui->data_len, 8);
ubifs_release_budget(c, &req);
}
goto out_up;
}
+ c->cmt_no += 1;
err = ubifs_gc_start_commit(c);
if (err)
goto out_up;
goto out;
mutex_lock(&c->mst_mutex);
- c->mst_node->cmt_no = cpu_to_le64(++c->cmt_no);
+ c->mst_node->cmt_no = cpu_to_le64(c->cmt_no);
c->mst_node->log_lnum = cpu_to_le32(new_ltail_lnum);
c->mst_node->root_lnum = cpu_to_le32(zroot.lnum);
c->mst_node->root_offs = cpu_to_le32(zroot.offs);
void dbg_dump_lstats(const struct ubifs_lp_stats *lst)
{
spin_lock(&dbg_lock);
- printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs %d\n",
- lst->empty_lebs, lst->idx_lebs);
+ printk(KERN_DEBUG "(pid %d) Lprops statistics: empty_lebs %d, "
+ "idx_lebs %d\n", current->pid, lst->empty_lebs, lst->idx_lebs);
printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, "
"total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free,
lst->total_dirty);
struct ubifs_gced_idx_leb *idx_gc;
spin_lock(&dbg_lock);
- printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, "
- "budg_dd_growth %lld, budg_idx_growth %lld\n",
+ printk(KERN_DEBUG "(pid %d) Budgeting info: budg_data_growth %lld, "
+ "budg_dd_growth %lld, budg_idx_growth %lld\n", current->pid,
c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth);
printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, "
"freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth,
struct ubifs_lprops lp;
struct ubifs_lp_stats lst;
- printk(KERN_DEBUG "Dumping LEB properties\n");
+ printk(KERN_DEBUG "(pid %d) Dumping LEB properties\n", current->pid);
ubifs_get_lp_stats(c, &lst);
dbg_dump_lstats(&lst);
if (dbg_failure_mode)
return;
- printk(KERN_DEBUG "Dumping LEB %d\n", lnum);
+ printk(KERN_DEBUG "(pid %d) Dumping LEB %d\n", current->pid, lnum);
sleb = ubifs_scan(c, lnum, 0, c->dbg_buf);
if (IS_ERR(sleb)) {
{
int i;
- printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n",
- cat, heap->cnt);
+ printk(KERN_DEBUG "(pid %d) Dumping heap cat %d (%d elements)\n",
+ current->pid, cat, heap->cnt);
for (i = 0; i < heap->cnt; i++) {
struct ubifs_lprops *lprops = heap->arr[i];
{
int i;
- printk(KERN_DEBUG "Dumping pnode:\n");
+ printk(KERN_DEBUG "(pid %d) Dumping pnode:\n", current->pid);
printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n",
(size_t)pnode, (size_t)parent, (size_t)pnode->cnext);
printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n",
int level;
printk(KERN_DEBUG "\n");
- printk(KERN_DEBUG "Dumping the TNC tree\n");
+ printk(KERN_DEBUG "(pid %d) Dumping the TNC tree\n", current->pid);
znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL);
level = znode->level;
printk(KERN_DEBUG "== Level %d ==\n", level);
int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
int offset, int len, int dtype)
{
- int err;
+ int err, failing;
if (in_failure_mode(desc))
return -EIO;
- if (do_fail(desc, lnum, 1))
+ failing = do_fail(desc, lnum, 1);
+ if (failing)
cut_data(buf, len);
err = ubi_leb_write(desc, lnum, buf, offset, len, dtype);
if (err)
return err;
- if (in_failure_mode(desc))
+ if (failing)
return -EIO;
return 0;
}
#define UBIFS_DBG(op) op
-#define ubifs_assert(expr) do { \
+#define ubifs_assert(expr) do { \
if (unlikely(!(expr))) { \
printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
__func__, __LINE__, current->pid); \
const union ubifs_key *key);
/*
- * DBGKEY macros require dbg_lock to be held, which it is in the dbg message
+ * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message
* macros.
*/
#define DBGKEY(key) dbg_key_str0(c, (key))
#define DBGKEY1(key) dbg_key_str1(c, (key))
/* General messages */
-#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
+#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
/* Additional journal messages */
-#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
/* Additional TNC messages */
-#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
/* Additional lprops messages */
-#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
/* Additional LEB find messages */
-#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
/* Additional mount messages */
-#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
/* Additional I/O messages */
-#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
/* Additional commit messages */
-#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
/* Additional budgeting messages */
-#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
/* Additional log messages */
-#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
/* Additional gc messages */
-#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
/* Additional scan messages */
-#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
/* Additional recovery messages */
-#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
/*
* Debugging message type flags (must match msg_type_names in debug.c).
struct ubifs_zbranch *zbr, void *priv);
typedef int (*dbg_znode_callback)(struct ubifs_info *c,
struct ubifs_znode *znode, void *priv);
-
int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
dbg_znode_callback znode_cb, void *priv);
/* Checking functions */
int dbg_check_lprops(struct ubifs_info *c);
-
int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
-
int dbg_check_cats(struct ubifs_info *c);
-
int dbg_check_ltab(struct ubifs_info *c);
-
int dbg_check_synced_i_size(struct inode *inode);
-
int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir);
-
int dbg_check_tnc(struct ubifs_info *c, int extra);
-
int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
-
int dbg_check_filesystem(struct ubifs_info *c);
-
void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
int add_pos);
-
int dbg_check_lprops(struct ubifs_info *c);
int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
int row, int col);
#else /* !CONFIG_UBIFS_FS_DEBUG */
#define UBIFS_DBG(op)
-#define ubifs_assert(expr) ({})
-#define ubifs_assert_cmt_locked(c)
+
+/* Use "if (0)" to make compiler check arguments even if debugging is off */
+#define ubifs_assert(expr) do { \
+ if (0 && (expr)) \
+ printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
+ __func__, __LINE__, current->pid); \
+} while (0)
+
+#define dbg_err(fmt, ...) do { \
+ if (0) \
+ ubifs_err(fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define dbg_msg(fmt, ...) do { \
+ if (0) \
+ printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n", \
+ current->pid, __func__, ##__VA_ARGS__); \
+} while (0)
+
#define dbg_dump_stack()
-#define dbg_err(fmt, ...) ({})
-#define dbg_msg(fmt, ...) ({})
-#define dbg_key(c, key, fmt, ...) ({})
-
-#define dbg_gen(fmt, ...) ({})
-#define dbg_jnl(fmt, ...) ({})
-#define dbg_tnc(fmt, ...) ({})
-#define dbg_lp(fmt, ...) ({})
-#define dbg_find(fmt, ...) ({})
-#define dbg_mnt(fmt, ...) ({})
-#define dbg_io(fmt, ...) ({})
-#define dbg_cmt(fmt, ...) ({})
-#define dbg_budg(fmt, ...) ({})
-#define dbg_log(fmt, ...) ({})
-#define dbg_gc(fmt, ...) ({})
-#define dbg_scan(fmt, ...) ({})
-#define dbg_rcvry(fmt, ...) ({})
-
-#define dbg_ntype(type) ""
-#define dbg_cstate(cmt_state) ""
-#define dbg_get_key_dump(c, key) ({})
-#define dbg_dump_inode(c, inode) ({})
-#define dbg_dump_node(c, node) ({})
-#define dbg_dump_budget_req(req) ({})
-#define dbg_dump_lstats(lst) ({})
-#define dbg_dump_budg(c) ({})
-#define dbg_dump_lprop(c, lp) ({})
-#define dbg_dump_lprops(c) ({})
-#define dbg_dump_leb(c, lnum) ({})
-#define dbg_dump_znode(c, znode) ({})
-#define dbg_dump_heap(c, heap, cat) ({})
-#define dbg_dump_pnode(c, pnode, parent, iip) ({})
-#define dbg_dump_tnc(c) ({})
-#define dbg_dump_index(c) ({})
+#define ubifs_assert_cmt_locked(c)
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
+#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+
+#define DBGKEY(key) ((char *)(key))
+#define DBGKEY1(key) ((char *)(key))
+
+#define dbg_ntype(type) ""
+#define dbg_cstate(cmt_state) ""
+#define dbg_get_key_dump(c, key) ({})
+#define dbg_dump_inode(c, inode) ({})
+#define dbg_dump_node(c, node) ({})
+#define dbg_dump_budget_req(req) ({})
+#define dbg_dump_lstats(lst) ({})
+#define dbg_dump_budg(c) ({})
+#define dbg_dump_lprop(c, lp) ({})
+#define dbg_dump_lprops(c) ({})
+#define dbg_dump_leb(c, lnum) ({})
+#define dbg_dump_znode(c, znode) ({})
+#define dbg_dump_heap(c, heap, cat) ({})
+#define dbg_dump_pnode(c, pnode, parent, iip) ({})
+#define dbg_dump_tnc(c) ({})
+#define dbg_dump_index(c) ({})
+#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
#define dbg_old_index_check_init(c, zroot) 0
#define dbg_check_old_index(c, zroot) 0
-
#define dbg_check_cats(c) 0
-
#define dbg_check_ltab(c) 0
-
#define dbg_check_synced_i_size(inode) 0
-
#define dbg_check_dir_size(c, dir) 0
-
#define dbg_check_tnc(c, x) 0
-
#define dbg_check_idx_size(c, idx_size) 0
-
#define dbg_check_filesystem(c) 0
-
#define dbg_check_heap(c, heap, cat, add_pos) ({})
-
#define dbg_check_lprops(c) 0
#define dbg_check_lpt_nodes(c, cnode, row, col) 0
-
#define dbg_force_in_the_gaps_enabled 0
#define dbg_force_in_the_gaps() 0
-
#define dbg_failure_mode 0
#define dbg_failure_mode_registration(c) ({})
#define dbg_failure_mode_deregistration(c) ({})
}
inode->i_ino = ++c->highest_inum;
- inode->i_generation = ++c->vfs_gen;
/*
* The creation sequence number remains with this inode for its
* lifetime. All nodes for this inode have a greater sequence number,
err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name);
if (err) {
- /*
- * Do not hash the direntry if parent 'i_nlink' is zero, because
- * this has side-effects - '->delete_inode()' call will not be
- * called for the parent orphan inode, because 'd_count' of its
- * direntry will stay 1 (it'll be negative direntry I guess)
- * and prevent 'iput_final()' until the dentry is destroyed due
- * to unmount or memory pressure.
- */
- if (err == -ENOENT && dir->i_nlink != 0) {
+ if (err == -ENOENT) {
dbg_gen("not found");
goto done;
}
struct ubifs_inode *dir_ui = ubifs_inode(dir);
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
/*
* Budget request settings: new direntry, changing the target inode,
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
- struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .dirtied_ino_d = 1 };
+ struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
int err, devlen = 0;
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = devlen, .dirtied_ino = 1 };
+ .new_ino_d = ALIGN(devlen, 8),
+ .dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
int err, len = strlen(symname);
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = len, .dirtied_ino = 1 };
+ .new_ino_d = ALIGN(len, 8),
+ .dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1,
.dirtied_ino = 3 };
struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
- .dirtied_ino_d = old_inode_ui->data_len };
+ .dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
struct timespec time;
/*
loff_t new_size = attr->ia_size;
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
struct inode *inode = dentry->d_inode;
struct ubifs_info *c = inode->i_sb->s_fs_info;
- dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid);
+ dbg_gen("ino %lu, mode %#x, ia_valid %#x",
+ inode->i_ino, inode->i_mode, attr->ia_valid);
err = inode_change_ok(inode, attr);
if (err)
return err;
if (mctime_update_needed(inode, &now)) {
int err, release;
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
.fsync = ubifs_fsync,
.unlocked_ioctl = ubifs_ioctl,
.splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
#ifdef CONFIG_COMPAT
.compat_ioctl = ubifs_compat_ioctl,
#endif
idx_lp = idx_heap->arr[0];
sum = idx_lp->free + idx_lp->dirty;
/*
- * Since we reserve twice as more space for the index than it
+ * Since we reserve thrice as much space for the index than it
* actually takes, it does not make sense to pick indexing LEBs
- * with less than half LEB of dirty space.
+ * with less than, say, half LEB of dirty space. May be half is
+ * not the optimal boundary - this should be tested and
+ * checked. This boundary should determine how much we use
+ * in-the-gaps to consolidate the index comparing to how much
+ * we use garbage collector to consolidate it. The "half"
+ * criteria just feels to be fine.
*/
if (sum < min_space || sum < c->half_leb_size)
idx_lp = NULL;
#include <linux/crc32.h>
#include "ubifs.h"
+/**
+ * ubifs_ro_mode - switch UBIFS to read read-only mode.
+ * @c: UBIFS file-system description object
+ * @err: error code which is the reason of switching to R/O mode
+ */
+void ubifs_ro_mode(struct ubifs_info *c, int err)
+{
+ if (!c->ro_media) {
+ c->ro_media = 1;
+ ubifs_warn("switched to read-only mode, error %d", err);
+ dbg_dump_stack();
+ }
+}
+
/**
* ubifs_check_node - check node.
* @c: UBIFS file-system description object
* @ino: buffer in which to pack inode node
* @inode: inode to pack
* @last: indicates the last node of the group
- * @last_reference: non-zero if this is a deletion inode
*/
static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
- const struct inode *inode, int last,
- int last_reference)
+ const struct inode *inode, int last)
{
- int data_len = 0;
+ int data_len = 0, last_reference = !inode->i_nlink;
struct ubifs_inode *ui = ubifs_inode(inode);
ino->ch.node_type = UBIFS_INO_NODE;
ubifs_prep_grp_node(c, dent, dlen, 0);
ino = (void *)dent + aligned_dlen;
- pack_inode(c, ino, inode, 0, last_reference);
+ pack_inode(c, ino, inode, 0);
ino = (void *)ino + aligned_ilen;
- pack_inode(c, ino, dir, 1, 0);
+ pack_inode(c, ino, dir, 1);
if (last_reference) {
err = ubifs_add_orphan(c, inode->i_ino);
release_head(c, BASEHD);
goto out_finish;
}
+ ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
* ubifs_jnl_write_inode - flush inode to the journal.
* @c: UBIFS file-system description object
* @inode: inode to flush
- * @deletion: inode has been deleted
*
* This function writes inode @inode to the journal. If the inode is
* synchronous, it also synchronizes the write-buffer. Returns zero in case of
* success and a negative error code in case of failure.
*/
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
- int deletion)
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
{
- int err, len, lnum, offs, sync = 0;
+ int err, lnum, offs;
struct ubifs_ino_node *ino;
struct ubifs_inode *ui = ubifs_inode(inode);
+ int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
- dbg_jnl("ino %lu%s", inode->i_ino,
- deletion ? " (last reference)" : "");
- if (deletion)
- ubifs_assert(inode->i_nlink == 0);
+ dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
- len = UBIFS_INO_NODE_SZ;
/*
* If the inode is being deleted, do not write the attached data. No
* need to synchronize the write-buffer either.
*/
- if (!deletion) {
+ if (!last_reference) {
len += ui->data_len;
sync = IS_SYNC(inode);
}
if (err)
goto out_free;
- pack_inode(c, ino, inode, 1, deletion);
+ pack_inode(c, ino, inode, 1);
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
if (err)
goto out_release;
inode->i_ino);
release_head(c, BASEHD);
- if (deletion) {
+ if (last_reference) {
err = ubifs_tnc_remove_ino(c, inode->i_ino);
if (err)
goto out_ro;
return err;
}
+/**
+ * ubifs_jnl_delete_inode - delete an inode.
+ * @c: UBIFS file-system description object
+ * @inode: inode to delete
+ *
+ * This function deletes inode @inode which includes removing it from orphans,
+ * deleting it from TNC and, in some cases, writing a deletion inode to the
+ * journal.
+ *
+ * When regular file inodes are unlinked or a directory inode is removed, the
+ * 'ubifs_jnl_update()' function writes a corresponding deletion inode and
+ * direntry to the media, and adds the inode to orphans. After this, when the
+ * last reference to this inode has been dropped, this function is called. In
+ * general, it has to write one more deletion inode to the media, because if
+ * a commit happened between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
+ * anymore, and in fact it might not be on the flash anymore, because it might
+ * have been garbage-collected already. And for optimization reasons UBIFS does
+ * not read the orphan area if it has been unmounted cleanly, so it would have
+ * no indication in the journal that there is a deleted inode which has to be
+ * removed from TNC.
+ *
+ * However, if there was no commit between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
+ * inode to the media for the second time. And this is quite a typical case.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
+{
+ int err;
+ struct ubifs_inode *ui = ubifs_inode(inode);
+
+ ubifs_assert(inode->i_nlink == 0);
+
+ if (ui->del_cmtno != c->cmt_no)
+ /* A commit happened for sure */
+ return ubifs_jnl_write_inode(c, inode);
+
+ down_read(&c->commit_sem);
+ /*
+ * Check commit number again, because the first test has been done
+ * without @c->commit_sem, so a commit might have happened.
+ */
+ if (ui->del_cmtno != c->cmt_no) {
+ up_read(&c->commit_sem);
+ return ubifs_jnl_write_inode(c, inode);
+ }
+
+ err = ubifs_tnc_remove_ino(c, inode->i_ino);
+ if (err)
+ ubifs_ro_mode(c, err);
+ else
+ ubifs_delete_orphan(c, inode->i_ino);
+ up_read(&c->commit_sem);
+ return err;
+}
+
/**
* ubifs_jnl_rename - rename a directory entry.
* @c: UBIFS file-system description object
p = (void *)dent2 + aligned_dlen2;
if (new_inode) {
- pack_inode(c, p, new_inode, 0, last_reference);
+ pack_inode(c, p, new_inode, 0);
p += ALIGN(ilen, 8);
}
if (!move)
- pack_inode(c, p, old_dir, 1, 0);
+ pack_inode(c, p, old_dir, 1);
else {
- pack_inode(c, p, old_dir, 0, 0);
+ pack_inode(c, p, old_dir, 0);
p += ALIGN(plen, 8);
- pack_inode(c, p, new_dir, 1, 0);
+ pack_inode(c, p, new_dir, 1);
}
if (last_reference) {
release_head(c, BASEHD);
goto out_finish;
}
+ new_ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
if (err)
goto out_free;
- pack_inode(c, ino, inode, 0, 0);
+ pack_inode(c, ino, inode, 0);
ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
if (dlen)
ubifs_prep_grp_node(c, dn, dlen, 1);
ubifs_prep_grp_node(c, xent, xlen, 0);
ino = (void *)xent + aligned_xlen;
- pack_inode(c, ino, inode, 0, 1);
+ pack_inode(c, ino, inode, 0);
ino = (void *)ino + UBIFS_INO_NODE_SZ;
- pack_inode(c, ino, host, 1, 0);
+ pack_inode(c, ino, host, 1);
err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
if (!sync && !err)
const struct inode *host)
{
int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
- struct ubifs_inode *host_ui = ubifs_inode(inode);
+ struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_ino_node *ino;
union ubifs_key key;
int sync = IS_DIRSYNC(host);
if (err)
goto out_free;
- pack_inode(c, ino, host, 0, 0);
- pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0);
+ pack_inode(c, ino, host, 0);
+ pack_inode(c, (void *)ino + aligned_len1, inode, 1);
err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
if (!sync && !err) {
return 0;
out_unlock:
+ if (err != -EAGAIN)
+ ubifs_ro_mode(c, err);
mutex_unlock(&c->log_mutex);
kfree(ref);
kfree(bud);
return -ENOMEM;
cs->ch.node_type = UBIFS_CS_NODE;
- cs->cmt_no = cpu_to_le64(c->cmt_no + 1);
+ cs->cmt_no = cpu_to_le64(c->cmt_no);
ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0);
/*
return container_of(inode, struct ubifs_inode, vfs_inode);
}
-/**
- * ubifs_ro_mode - switch UBIFS to read read-only mode.
- * @c: UBIFS file-system description object
- * @err: error code which is the reason of switching to R/O mode
- */
-static inline void ubifs_ro_mode(struct ubifs_info *c, int err)
-{
- if (!c->ro_media) {
- c->ro_media = 1;
- ubifs_warn("switched to read-only mode, error %d", err);
- dbg_dump_stack();
- }
-}
-
/**
* ubifs_compr_present - check if compressor was compiled in.
* @compr_type: compressor type to check
{
int divisor, factor;
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1);
+ divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
do_div(free, divisor);
c->cmt_orphans -= cnt;
spin_unlock(&c->orphan_lock);
if (c->cmt_orphans)
- orph->cmt_no = cpu_to_le64(c->cmt_no + 1);
+ orph->cmt_no = cpu_to_le64(c->cmt_no);
else
/* Mark the last node of the commit */
- orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63));
+ orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63));
ubifs_assert(c->ohead_offs + len <= c->leb_size);
ubifs_assert(c->ohead_lnum >= c->orph_first);
ubifs_assert(c->ohead_lnum <= c->orph_last);
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/ctype.h>
-#include <linux/random.h>
#include <linux/kthread.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
if (err)
goto out_invalid;
- /* Disable readahead */
+ /* Disable read-ahead */
inode->i_mapping->backing_dev_info = &c->bdi;
switch (inode->i_mode & S_IFMT) {
*/
static int ubifs_write_inode(struct inode *inode, int wait)
{
- int err;
+ int err = 0;
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_inode *ui = ubifs_inode(inode);
return 0;
}
- dbg_gen("inode %lu", inode->i_ino);
- err = ubifs_jnl_write_inode(c, inode, 0);
- if (err)
- ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+ /*
+ * As an optimization, do not write orphan inodes to the media just
+ * because this is not needed.
+ */
+ dbg_gen("inode %lu, mode %#x, nlink %u",
+ inode->i_ino, (int)inode->i_mode, inode->i_nlink);
+ if (inode->i_nlink) {
+ err = ubifs_jnl_write_inode(c, inode);
+ if (err)
+ ubifs_err("can't write inode %lu, error %d",
+ inode->i_ino, err);
+ }
ui->dirty = 0;
mutex_unlock(&ui->ui_mutex);
{
int err;
struct ubifs_info *c = inode->i_sb->s_fs_info;
+ struct ubifs_inode *ui = ubifs_inode(inode);
- if (ubifs_inode(inode)->xattr)
+ if (ui->xattr)
/*
* Extended attribute inode deletions are fully handled in
* 'ubifs_removexattr()'. These inodes are special and have
*/
goto out;
- dbg_gen("inode %lu", inode->i_ino);
+ dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
ubifs_assert(!atomic_read(&inode->i_count));
ubifs_assert(inode->i_nlink == 0);
if (is_bad_inode(inode))
goto out;
- ubifs_inode(inode)->ui_size = inode->i_size = 0;
- err = ubifs_jnl_write_inode(c, inode, 1);
+ ui->ui_size = inode->i_size = 0;
+ err = ubifs_jnl_delete_inode(c, inode);
if (err)
/*
* Worst case we have a lost orphan inode wasting space, so a
- * simple error message is ok here.
+ * simple error message is OK here.
*/
- ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+ ubifs_err("can't delete inode %lu, error %d",
+ inode->i_ino, err);
+
out:
+ if (ui->dirty)
+ ubifs_release_dirty_inode_budget(c, ui);
clear_inode(inode);
}
if (err)
goto out_infos;
- ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num,
- c->vi.vol_id);
+ ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"",
+ c->vi.ubi_num, c->vi.vol_id, c->vi.name);
if (mounted_read_only)
ubifs_msg("mounted read-only");
x = (long long)c->main_lebs * c->leb_size;
*/
ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
ubifs_assert(c->budg_idx_growth == 0);
+ ubifs_assert(c->budg_dd_growth == 0);
ubifs_assert(c->budg_data_growth == 0);
/*
INIT_LIST_HEAD(&c->orph_new);
c->highest_inum = UBIFS_FIRST_INO;
- get_random_bytes(&c->vfs_gen, sizeof(int));
c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
ubi_get_volume_info(ubi, &c->vi);
}
/*
- * UBIFS provids 'backing_dev_info' in order to disable readahead. For
+ * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
* UBIFS, I/O is not deferred, it is done immediately in readpage,
* which means the user would have to wait not just for their own I/O
- * but the readahead I/O as well i.e. completely pointless.
+ * but the read-ahead I/O as well i.e. completely pointless.
*
* Read-ahead will be disabled because @c->bdi.ra_pages is 0.
*/
written = layout_leb_in_gaps(c, p);
if (written < 0) {
err = written;
- if (err == -ENOSPC) {
- if (!dbg_force_in_the_gaps_enabled) {
- /*
- * Do not print scary warnings if the
- * debugging option which forces
- * in-the-gaps is enabled.
- */
- ubifs_err("out of space");
- spin_lock(&c->space_lock);
- dbg_dump_budg(c);
- spin_unlock(&c->space_lock);
- dbg_dump_lprops(c);
- }
- /* Try to commit anyway */
- err = 0;
- break;
+ if (err != -ENOSPC) {
+ kfree(c->gap_lebs);
+ c->gap_lebs = NULL;
+ return err;
}
- kfree(c->gap_lebs);
- c->gap_lebs = NULL;
- return err;
+ if (!dbg_force_in_the_gaps_enabled) {
+ /*
+ * Do not print scary warnings if the debugging
+ * option which forces in-the-gaps is enabled.
+ */
+ ubifs_err("out of space");
+ spin_lock(&c->space_lock);
+ dbg_dump_budg(c);
+ spin_unlock(&c->space_lock);
+ dbg_dump_lprops(c);
+ }
+ /* Try to commit anyway */
+ err = 0;
+ break;
}
p++;
cnt -= written;
/* Minimum number of orphan area logical eraseblocks */
#define UBIFS_MIN_ORPH_LEBS 1
/*
- * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1
+ * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1
* for GC, 1 for deletions, and at least 1 for committed data).
*/
-#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5)
+#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6)
/* Minimum number of logical eraseblocks */
#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
* Adrian Hunter
*/
-/* Implementation version 0.7 */
-
#ifndef __UBIFS_H__
#define __UBIFS_H__
* struct ubifs_inode - UBIFS in-memory inode description.
* @vfs_inode: VFS inode description object
* @creat_sqnum: sequence number at time of creation
+ * @del_cmtno: commit number corresponding to the time the inode was deleted,
+ * protected by @c->commit_sem;
* @xattr_size: summarized size of all extended attributes in bytes
* @xattr_cnt: count of extended attributes this inode has
* @xattr_names: sum of lengths of all extended attribute names belonging to
struct ubifs_inode {
struct inode vfs_inode;
unsigned long long creat_sqnum;
+ unsigned long long del_cmtno;
unsigned int xattr_size;
unsigned int xattr_cnt;
unsigned int xattr_names;
/**
* struct ubifs_budget_req - budget requirements of an operation.
*
- * @fast: non-zero if the budgeting should try to aquire budget quickly and
+ * @fast: non-zero if the budgeting should try to acquire budget quickly and
* should not try to call write-back
* @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields
* have to be re-calculated
* An inode may contain 4KiB of data at max., thus the widths of @new_ino_d
* is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made
* dirty by the re-name operation.
+ *
+ * Note, UBIFS aligns node lengths to 8-bytes boundary, so the requester has to
+ * make sure the amount of inode data which contribute to @new_ino_d and
+ * @dirtied_ino_d fields are aligned.
*/
struct ubifs_budget_req {
unsigned int fast:1;
unsigned int recalculate:1;
+#ifndef UBIFS_DEBUG
unsigned int new_page:1;
unsigned int dirtied_page:1;
unsigned int new_dent:1;
unsigned int mod_dent:1;
unsigned int new_ino:1;
unsigned int new_ino_d:13;
-#ifndef UBIFS_DEBUG
unsigned int dirtied_ino:4;
unsigned int dirtied_ino_d:15;
#else
/* Not bit-fields to check for overflows */
+ unsigned int new_page;
+ unsigned int dirtied_page;
+ unsigned int new_dent;
+ unsigned int mod_dent;
+ unsigned int new_ino;
+ unsigned int new_ino_d;
unsigned int dirtied_ino;
unsigned int dirtied_ino_d;
#endif
* struct ubifs_info - UBIFS file-system description data structure
* (per-superblock).
* @vfs_sb: VFS @struct super_block object
- * @bdi: backing device info object to make VFS happy and disable readahead
+ * @bdi: backing device info object to make VFS happy and disable read-ahead
*
* @highest_inum: highest used inode number
- * @vfs_gen: VFS inode generation counter
* @max_sqnum: current global sequence number
- * @cmt_no: commit number (last successfully completed commit)
- * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters
+ * @cmt_no: commit number of the last successfully completed commit, protected
+ * by @commit_sem
+ * @cnt_lock: protects @highest_inum and @max_sqnum counters
* @fmt_version: UBIFS on-flash format version
* @uuid: UUID from super block
*
struct backing_dev_info bdi;
ino_t highest_inum;
- unsigned int vfs_gen;
unsigned long long max_sqnum;
unsigned long long cmt_no;
spinlock_t cnt_lock;
extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
/* io.c */
+void ubifs_ro_mode(struct ubifs_info *c, int err);
int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len);
int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
int dtype);
int deletion, int xent);
int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
const union ubifs_key *key, const void *buf, int len);
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
- int last_reference);
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode);
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode);
int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
const struct dentry *old_dentry,
const struct inode *new_dir,
/*
* Limit the number of extended attributes per inode so that the total size
- * (xattr_size) is guaranteeded to fit in an 'unsigned int'.
+ * (@xattr_size) is guaranteeded to fit in an 'unsigned int'.
*/
#define MAX_XATTRS_PER_INODE 65535
struct inode *inode;
struct ubifs_inode *ui, *host_ui = ubifs_inode(host);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = size, .dirtied_ino = 1,
- .dirtied_ino_d = host_ui->data_len};
+ .new_ino_d = ALIGN(size, 8), .dirtied_ino = 1,
+ .dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE)
return -ENOSPC;
/*
* Linux limits the maximum size of the extended attribute names list
- * to %XATTR_LIST_MAX. This means we should not allow creating more*
+ * to %XATTR_LIST_MAX. This means we should not allow creating more
* extended attributes if the name list becomes larger. This limitation
* is artificial for UBIFS, though.
*/
goto out_budg;
}
- mutex_lock(&host_ui->ui_mutex);
/* Re-define all operations to be "nothing" */
inode->i_mapping->a_ops = &none_address_operations;
inode->i_op = &none_inode_operations;
ui->data = kmalloc(size, GFP_NOFS);
if (!ui->data) {
err = -ENOMEM;
- goto out_unlock;
+ goto out_free;
}
-
memcpy(ui->data, value, size);
+ inode->i_size = ui->ui_size = size;
+ ui->data_len = size;
+
+ mutex_lock(&host_ui->ui_mutex);
host->i_ctime = ubifs_current_time(host);
host_ui->xattr_cnt += 1;
host_ui->xattr_size += CALC_DENT_SIZE(nm->len);
host_ui->xattr_size += CALC_XATTR_BYTES(size);
host_ui->xattr_names += nm->len;
- /*
- * We do not use i_size_write() because nobody can race with us as we
- * are holding host @host->i_mutex - every xattr operation for this
- * inode is serialized by it.
- */
- inode->i_size = ui->ui_size = size;
- ui->data_len = size;
err = ubifs_jnl_update(c, host, nm, inode, 0, 1);
if (err)
goto out_cancel;
host_ui->xattr_cnt -= 1;
host_ui->xattr_size -= CALC_DENT_SIZE(nm->len);
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
-out_unlock:
mutex_unlock(&host_ui->ui_mutex);
+out_free:
make_bad_inode(inode);
iput(inode);
out_budg:
struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_budget_req req = { .dirtied_ino = 2,
- .dirtied_ino_d = size + host_ui->data_len };
+ .dirtied_ino_d = ALIGN(size, 8) + ALIGN(host_ui->data_len, 8) };
ubifs_assert(ui->data_len == inode->i_size);
err = ubifs_budget_space(c, &req);
if (err)
return err;
- mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
- host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
- host_ui->xattr_size += CALC_XATTR_BYTES(size);
-
kfree(ui->data);
ui->data = kmalloc(size, GFP_NOFS);
if (!ui->data) {
err = -ENOMEM;
- goto out_unlock;
+ goto out_free;
}
-
memcpy(ui->data, value, size);
inode->i_size = ui->ui_size = size;
ui->data_len = size;
+ mutex_lock(&host_ui->ui_mutex);
+ host->i_ctime = ubifs_current_time(host);
+ host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
+ host_ui->xattr_size += CALC_XATTR_BYTES(size);
+
/*
* It is important to write the host inode after the xattr inode
* because if the host inode gets synchronized (via 'fsync()'), then
out_cancel:
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
- make_bad_inode(inode);
-out_unlock:
mutex_unlock(&host_ui->ui_mutex);
+ make_bad_inode(inode);
+out_free:
ubifs_release_budget(c, &req);
return err;
}
dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name,
host->i_ino, dentry->d_name.len, dentry->d_name.name, size);
+ ubifs_assert(mutex_is_locked(&host->i_mutex));
if (size > UBIFS_MAX_INO_DATA)
return -ERANGE;
if (!xent)
return -ENOMEM;
- mutex_lock(&host->i_mutex);
xent_key_init(c, &key, host->i_ino, &nm);
err = ubifs_tnc_lookup_nm(c, &key, xent, &nm);
if (err) {
out_iput:
iput(inode);
out_unlock:
- mutex_unlock(&host->i_mutex);
kfree(xent);
return err;
}
return -ERANGE;
lowest_xent_key(c, &key, host->i_ino);
-
- mutex_lock(&host->i_mutex);
while (1) {
int type;
pxent = xent;
key_read(c, &xent->key, &key);
}
- mutex_unlock(&host->i_mutex);
kfree(pxent);
if (err != -ENOENT) {
int err;
struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_inode *ui = ubifs_inode(inode);
- struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1,
- .dirtied_ino_d = host_ui->data_len };
+ struct ubifs_budget_req req = { .dirtied_ino = 2, .mod_dent = 1,
+ .dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
ubifs_assert(ui->data_len == inode->i_size);
*/
u32 acpi_ns_opens_scope(acpi_object_type type);
-void
+acpi_status
acpi_ns_build_external_path(struct acpi_namespace_node *node,
acpi_size size, char *name_buffer);
*/
#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+#define __ASM_ARM_REGS_NAND
#define S3C2410_NFREG(x) (x)
#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+#define __ASM_ARCH_REGS_TIMER_H
#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+#define __ASM_ARCH_REGS_WATCHDOG_H
#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
extern void s3c2410_init_clocks(int xtal);
-extern int s3c2410_baseclk_add(void);
-
#else
#define s3c2410_init_clocks NULL
#define s3c2410_init_uarts NULL
#define s3c2410_map_io NULL
#define s3c2410_init NULL
#endif
+
+extern int s3c2410_baseclk_add(void);
include include/asm-generic/Kbuild.asm
-header-y += fixed_code.h
+unifdef-y += fixed_code.h
extern void dump_bfin_mem(struct pt_regs *regs);
extern void dump_bfin_trace_buffer(void);
+/* init functions only */
extern int init_arch_irq(void);
-extern void bfin_reset(void);
-extern void _cplb_hdr(void);
-/* Blackfin cache functions */
extern void bfin_icache_init(void);
extern void bfin_dcache_init(void);
-extern int read_iloc(void);
-extern int bfin_console_init(void);
-extern asmlinkage void lower_to_irq14(void);
-extern asmlinkage void bfin_return_from_exception(void);
extern void init_exception_vectors(void);
-extern void init_dma(void);
extern void program_IAR(void);
-extern void evt14_softirq(void);
+
+extern void bfin_reset(void);
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void evt14_softirq(void);
extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
-extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
-extern char fixed_code_start;
-extern char fixed_code_end;
-extern int atomic_xchg32(void);
-extern int atomic_cas32(void);
-extern int atomic_add32(void);
-extern int atomic_sub32(void);
-extern int atomic_ior32(void);
-extern int atomic_and32(void);
-extern int atomic_xor32(void);
-extern void safe_user_instruction(void);
-extern void sigreturn_stub(void);
-
extern void *l1_data_A_sram_alloc(size_t);
extern void *l1_data_B_sram_alloc(size_t);
extern void *l1_inst_sram_alloc(size_t);
extern int sram_free_with_lsl(const void*);
extern const char bfin_board_name[];
-extern unsigned long wall_jiffies;
extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern struct file_operations dpmc_fops;
extern unsigned long _ramstart, _ramend, _rambase;
extern unsigned long memory_start, memory_end, physical_mem_end;
extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
_ebss_l2[], _l2_lma_start[];
-#ifdef CONFIG_MTD_UCLINUX
+/* only used when CONFIG_MTD_UCLINUX */
extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+extern void cache_grab_lock(int way);
+extern void cache_lock(int way);
#endif
#endif
#ifndef __ASSEMBLY__
void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void do_hibernate(int wakeup);
/* This file defines the fixed addresses where userspace programs can find
atomic code sequences. */
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
+
#define FIXED_CODE_START 0x400
#define SIGRETURN_STUB 0x400
#define SAFE_USER_INSTRUCTION 0x480
#define FIXED_CODE_END 0x490
+
+#endif
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
-#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612)
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_5
#endif
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#endif
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_DMEM_CONTROL(unsigned int val);
-#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
-#endif
#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS)
#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val)
#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR)
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_IMEM_CONTROL(unsigned int val);
-#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
-#endif
#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS)
#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val)
#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR)
#define __NR_semtimedop 357
#define __NR_timerfd_settime 358
#define __NR_timerfd_gettime 359
+#define __NR_signalfd4 360
+#define __NR_eventfd2 361
+#define __NR_epoll_create1 362
+#define __NR_dup3 363
+#define __NR_pipe2 364
+#define __NR_inotify_init1 365
-#define __NR_syscall 360
+#define __NR_syscall 366
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
include include/asm-generic/Kbuild.asm
-header-y += arch/
header-y += arch-v10/
header-y += arch-v32/
return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
}
+#define ioremap_wc ioremap_nocache
+
extern void iounmap(void volatile __iomem *addr);
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_MIPS
return (void *) (offset | 0x20000000);
}
+#define ioremap_wc ioremap_nocache
+
static inline void iounmap(void *addr)
{
}
#define ALIAS_TABLE_ENTRY_SIZE 2
#define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *))
-/* helper macros */
-#define LOW_U32(x) ((x) & ((1ULL << 32)-1))
-
/* Length of the MMIO region for the AMD IOMMU */
#define MMIO_REGION_LENGTH 0x4000
#define MMIO_EVT_TAIL_OFFSET 0x2018
#define MMIO_STATUS_OFFSET 0x2020
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK 0x04
+
/* feature control bits */
#define CONTROL_IOMMU_EN 0x00ULL
#define CONTROL_HT_TUN_EN 0x01ULL
#define CMD_INV_IOMMU_PAGES 0x03
#define CMD_COMPL_WAIT_STORE_MASK 0x01
+#define CMD_COMPL_WAIT_INT_MASK 0x02
#define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01
#define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02
#define DEV_ENTRY_TRANSLATION 0x01
#define DEV_ENTRY_IR 0x3d
#define DEV_ENTRY_IW 0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT 0x62
#define DEV_ENTRY_EX 0x67
#define DEV_ENTRY_SYSMGT1 0x68
#define DEV_ENTRY_SYSMGT2 0x69
{
asm volatile(LOCK_PREFIX "addq %1,%0"
: "=m" (v->counter)
- : "ir" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter));
}
/**
{
asm volatile(LOCK_PREFIX "subq %1,%0"
: "=m" (v->counter)
- : "ir" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter));
}
/**
asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
: "=m" (v->counter), "=qm" (c)
- : "ir" (i), "m" (v->counter) : "memory");
+ : "er" (i), "m" (v->counter) : "memory");
return c;
}
asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
: "=m" (v->counter), "=qm" (c)
- : "ir" (i), "m" (v->counter) : "memory");
+ : "er" (i), "m" (v->counter) : "memory");
return c;
}
#define MSR_PIC_YSEL_HIGH 0x51400021
#define MSR_PIC_ZSEL_LOW 0x51400022
#define MSR_PIC_ZSEL_HIGH 0x51400023
+#define MSR_PIC_IRQM_LPC 0x51400025
#define MSR_MFGPT_IRQ 0x51400028
#define MSR_MFGPT_NR 0x51400029
}
extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
extern int geode_mfgpt_alloc_timer(int timer, int domain);
#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
#else
: [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
#endif
- if (unlikely(err))
- init_fpu(current);
return err;
}
#define build_mmio_read(name, size, type, reg, barrier) \
static inline type name(const volatile void __iomem *addr) \
-{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
:"m" (*(volatile type __force *)addr) barrier); return ret; }
#define build_mmio_write(name, size, type, reg, barrier) \
{ asm volatile("mov" size " %0,%1": :reg (val), \
"m" (*(volatile type __force *)addr) barrier); }
-build_mmio_read(readb, "b", unsigned char, "q", :"memory")
-build_mmio_read(readw, "w", unsigned short, "r", :"memory")
-build_mmio_read(readl, "l", unsigned int, "r", :"memory")
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
-build_mmio_read(__readb, "b", unsigned char, "q", )
-build_mmio_read(__readw, "w", unsigned short, "r", )
-build_mmio_read(__readl, "l", unsigned int, "r", )
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
build_mmio_write(writew, "w", unsigned short, "r", :"memory")
#define mmiowb() barrier()
#ifdef CONFIG_X86_64
-build_mmio_read(readq, "q", unsigned long, "r", :"memory")
-build_mmio_read(__readq, "q", unsigned long, "r", )
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
build_mmio_write(__writeq, "q", unsigned long, "r", )
# define PAGES_NR 17
#endif
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE 2048
+#endif
+
#ifndef __ASSEMBLY__
#include <linux/string.h>
/* Maximum address we can use for the control code buffer */
# define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-# define KEXEC_CONTROL_CODE_SIZE 4096
+# define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
# define KEXEC_ARCH KEXEC_ARCH_386
# define KEXEC_CONTROL_MEMORY_LIMIT (0xFFFFFFFFFFUL)
/* Allocate one page for the pdp and the second for the code */
-# define KEXEC_CONTROL_CODE_SIZE (4096UL + 4096UL)
+# define KEXEC_CONTROL_PAGE_SIZE (4096UL + 4096UL)
/* The native architecture */
# define KEXEC_ARCH KEXEC_ARCH_X86_64
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
#ifdef CONFIG_PCI_MMCONFIG
extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
#else
static inline void fam10h_check_enable_mmcfg(void) { }
static inline void check_enable_amd_mmconf_dmi(void) { }
reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
#define alloc_bootmem(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+ __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+ __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
#define alloc_bootmem_pages(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+ __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+ __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low_pages(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
#define alloc_bootmem_node(pgdat, x) \
DEFINE_PER_CPU(_type, _name) = _initvalue; \
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
{ [0 ... NR_CPUS-1] = _initvalue }; \
- __typeof__(_type) *_name##_early_ptr = _name##_early_map
+ __typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
EXPORT_PER_CPU_SYMBOL(_name)
#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
#define VMEMMAP_START _AC(0xffffe20000000000, UL)
#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
-#define MODULES_END _AC(0xfffffffffff00000, UL)
+#define MODULES_END _AC(0xffffffffff000000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
#ifndef __ASSEMBLY__
extern unsigned long idle_halt;
extern unsigned long idle_nomwait;
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt. Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions. wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+ mb();
+ /* check for clflush to determine if wbinvd is legal */
+ if (cpu_has_clflush)
+ asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+ else
+ while (1)
+ halt();
+}
+
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
{
int tmp = ACCESS_ONCE(lock->slock);
- return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
+ return (((tmp >> 8) - tmp) & 0xff) > 1;
}
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
int tmp = ACCESS_ONCE(lock->slock);
- return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
+ return (((tmp >> 16) - tmp) & 0xffff) > 1;
}
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
unifdef-y += isdnif.h
unifdef-y += isdn_divertif.h
unifdef-y += isdn_ppp.h
+unifdef-y += ivtv.h
+unifdef-y += ivtvfb.h
unifdef-y += joystick.h
unifdef-y += kdev_t.h
unifdef-y += kd.h
ATA_MAX_SECTORS_TAPE = 65535,
ATA_ID_WORDS = 256,
+ ATA_ID_CONFIG = 0,
+ ATA_ID_CYLS = 1,
+ ATA_ID_HEADS = 3,
+ ATA_ID_SECTORS = 6,
ATA_ID_SERNO = 10,
+ ATA_ID_BUF_SIZE = 21,
ATA_ID_FW_REV = 23,
ATA_ID_PROD = 27,
+ ATA_ID_MAX_MULTSECT = 47,
+ ATA_ID_DWORD_IO = 48,
+ ATA_ID_CAPABILITY = 49,
ATA_ID_OLD_PIO_MODES = 51,
+ ATA_ID_OLD_DMA_MODES = 52,
ATA_ID_FIELD_VALID = 53,
+ ATA_ID_CUR_CYLS = 54,
+ ATA_ID_CUR_HEADS = 55,
+ ATA_ID_CUR_SECTORS = 56,
+ ATA_ID_MULTSECT = 59,
+ ATA_ID_LBA_CAPACITY = 60,
+ ATA_ID_SWDMA_MODES = 62,
ATA_ID_MWDMA_MODES = 63,
ATA_ID_PIO_MODES = 64,
ATA_ID_EIDE_DMA_MIN = 65,
+ ATA_ID_EIDE_DMA_TIME = 66,
ATA_ID_EIDE_PIO = 67,
ATA_ID_EIDE_PIO_IORDY = 68,
- ATA_ID_UDMA_MODES = 88,
+ ATA_ID_QUEUE_DEPTH = 75,
ATA_ID_MAJOR_VER = 80,
+ ATA_ID_COMMAND_SET_1 = 82,
+ ATA_ID_COMMAND_SET_2 = 83,
+ ATA_ID_CFSSE = 84,
+ ATA_ID_CFS_ENABLE_1 = 85,
+ ATA_ID_CFS_ENABLE_2 = 86,
+ ATA_ID_CSF_DEFAULT = 87,
+ ATA_ID_UDMA_MODES = 88,
+ ATA_ID_HW_CONFIG = 93,
+ ATA_ID_SPG = 98,
+ ATA_ID_LBA_CAPACITY_2 = 100,
+ ATA_ID_LAST_LUN = 126,
+ ATA_ID_DLF = 128,
+ ATA_ID_CSFO = 129,
+ ATA_ID_CFA_POWER = 160,
ATA_ID_PIO4 = (1 << 1),
ATA_ID_SERNO_LEN = 20,
ATA_BUSY = (1 << 7), /* BSY status bit */
ATA_DRDY = (1 << 6), /* device ready */
ATA_DF = (1 << 5), /* device fault */
+ ATA_DSC = (1 << 4), /* drive seek complete */
ATA_DRQ = (1 << 3), /* data request i/o */
+ ATA_CORR = (1 << 2), /* corrected data error */
+ ATA_IDX = (1 << 1), /* index */
ATA_ERR = (1 << 0), /* have an error */
ATA_SRST = (1 << 2), /* software reset */
ATA_ICRC = (1 << 7), /* interface CRC error */
+ ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */
ATA_UNC = (1 << 6), /* uncorrectable media error */
+ ATA_MC = (1 << 5), /* media changed */
ATA_IDNF = (1 << 4), /* ID not found */
+ ATA_MCR = (1 << 3), /* media change requested */
ATA_ABORTED = (1 << 2), /* command aborted */
+ ATA_TRK0NF = (1 << 1), /* track 0 not found */
+ ATA_AMNF = (1 << 0), /* address mark not found */
+ ATAPI_LFS = 0xF0, /* last failed sense */
+ ATAPI_EOM = ATA_TRK0NF, /* end of media */
+ ATAPI_ILI = ATA_AMNF, /* illegal length indication */
+ ATAPI_IO = (1 << 1),
+ ATAPI_COD = (1 << 0),
/* ATA command block registers */
ATA_REG_DATA = 0x00,
ATA_CMD_PMP_WRITE = 0xE8,
ATA_CMD_CONF_OVERLAY = 0xB1,
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SMART = 0xB0,
+ ATA_CMD_MEDIA_LOCK = 0xDE,
+ ATA_CMD_MEDIA_UNLOCK = 0xDF,
+ /* marked obsolete in the ATA/ATAPI-7 spec */
+ ATA_CMD_RESTORE = 0x10,
+ /* EXABYTE specific */
+ ATA_EXABYTE_ENABLE_NEST = 0xF0,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
+ /* Enable/Disable Automatic Acoustic Management */
+ SETFEATURES_AAM_ON = 0x42,
+ SETFEATURES_AAM_OFF = 0xC2,
+
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
ATA_DCO_IDENTIFY = 0xC2,
ATA_DCO_SET = 0xC3,
+ /* feature values for SMART */
+ ATA_SMART_ENABLE = 0xD8,
+ ATA_SMART_READ_VALUES = 0xD0,
+ ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+ /* password used in LBA Mid / LBA High for executing SMART commands */
+ ATA_SMART_LBAM_PASS = 0x4F,
+ ATA_SMART_LBAH_PASS = 0xC2,
+
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
/*
* id tests
*/
-#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
-#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
-#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
+#define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
-#define ata_id_removeable(id) ((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
-#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
-#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
static inline bool ata_id_has_hipm(const u16 *id)
{
static inline int ata_id_has_fua(const u16 *id)
{
- if ((id[84] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
return 0;
- return id[84] & (1 << 6);
+ return id[ATA_ID_CFSSE] & (1 << 6);
}
static inline int ata_id_has_flush(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[83] & (1 << 12);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
}
static inline int ata_id_has_flush_ext(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[83] & (1 << 13);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
}
static inline int ata_id_has_lba48(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- if (!ata_id_u64(id, 100))
+ if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
return 0;
- return id[83] & (1 << 10);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
}
static inline int ata_id_hpa_enabled(const u16 *id)
{
/* Yes children, word 83 valid bits cover word 82 data */
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
/* And 87 covers 85-87 */
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
/* Check command sets enabled as well as supported */
- if ((id[85] & ( 1 << 10)) == 0)
+ if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
return 0;
- return id[82] & (1 << 10);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
}
static inline int ata_id_has_wcache(const u16 *id)
{
/* Yes children, word 83 valid bits cover word 82 data */
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[82] & (1 << 5);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
}
static inline int ata_id_has_pm(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[82] & (1 << 3);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
}
static inline int ata_id_rahead_enabled(const u16 *id)
{
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
- return id[85] & (1 << 6);
+ return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
}
static inline int ata_id_wcache_enabled(const u16 *id)
{
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
- return id[85] & (1 << 5);
+ return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
}
/**
static inline int ata_id_is_sata(const u16 *id)
{
- return ata_id_major_version(id) >= 5 && id[93] == 0;
+ return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
}
static inline int ata_id_has_tpm(const u16 *id)
/* ATA 8 reuses this flag for "trusted" computing */
if (ata_id_major_version(id) > 7)
return 0;
- if (id[48] & (1 << 0))
+ if (id[ATA_ID_DWORD_IO] & (1 << 0))
return 1;
return 0;
}
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
has not been issued to the device then the values of
- id[54] to id[56] are vendor specific. */
- return (id[53] & 0x01) && /* Current translation valid */
- id[54] && /* cylinders in current translation */
- id[55] && /* heads in current translation */
- id[55] <= 16 &&
- id[56]; /* sectors in current translation */
+ id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+ return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+ id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */
+ id[ATA_ID_CUR_HEADS] && /* heads in current translation */
+ id[ATA_ID_CUR_HEADS] <= 16 &&
+ id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */
}
static inline int ata_id_is_cfa(const u16 *id)
{
- u16 v = id[0];
- if (v == 0x848A) /* Standard CF */
+ if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */
return 1;
/* Could be CF hiding as standard ATA */
- if (ata_id_major_version(id) >= 3 && id[82] != 0xFFFF &&
- (id[82] & ( 1 << 2)))
+ if (ata_id_major_version(id) >= 3 &&
+ id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
+ (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
return 1;
return 0;
}
{
if (ata_id_is_sata(dev_id))
return 0; /* SATA */
- if ((dev_id[93] & 0xE000) == 0x6000)
+ if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
return 0; /* 80 wire */
return 1;
}
static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
{
- if ((dev_id[93] & 0x2000) == 0x2000)
+ if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
return 0; /* 80 wire */
return 1;
}
static inline int atapi_cdb_len(const u16 *dev_id)
{
- u16 tmp = dev_id[0] & 0x3;
+ u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
switch (tmp) {
case 0: return 12;
case 1: return 16;
static inline int atapi_command_packet_set(const u16 *dev_id)
{
- return (dev_id[0] >> 8) & 0x1f;
+ return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
}
static inline int atapi_id_dmadir(const u16 *dev_id)
kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
-int capable(int cap);
-int __capable(struct task_struct *t, int cap);
+/**
+ * has_capability - Determine if a task has a superior capability available
+ * @t: The task in question
+ * @cap: The capability to be tested for
+ *
+ * Return true if the specified task has the given superior capability
+ * currently in effect, false if not.
+ *
+ * Note that this does not set PF_SUPERPRIV on the task.
+ */
+#define has_capability(t, cap) (security_capable((t), (cap)) == 0)
+
+extern int capable(int cap);
#endif /* __KERNEL__ */
unsigned long timeout);
extern unsigned long wait_for_completion_interruptible_timeout(
struct completion *x, unsigned long timeout);
+extern bool try_wait_for_completion(struct completion *x);
+extern bool completion_done(struct completion *x);
extern void complete(struct completion *);
extern void complete_all(struct completion *);
#define INIT_COMPLETION(x) ((x).done = 0)
-/**
- * try_wait_for_completion - try to decrement a completion without blocking
- * @x: completion structure
- *
- * Returns: 0 if a decrement cannot be done without blocking
- * 1 if a decrement succeeded.
- *
- * If a completion is being used as a counting completion,
- * attempt to decrement the counter without blocking. This
- * enables us to avoid waiting if the resource the completion
- * is protecting is not available.
- */
-static inline bool try_wait_for_completion(struct completion *x)
-{
- int ret = 1;
-
- spin_lock_irq(&x->wait.lock);
- if (!x->done)
- ret = 0;
- else
- x->done--;
- spin_unlock_irq(&x->wait.lock);
- return ret;
-}
-
-/**
- * completion_done - Test to see if a completion has any waiters
- * @x: completion structure
- *
- * Returns: 0 if there are waiters (wait_for_completion() in progress)
- * 1 if there are no waiters.
- *
- */
-static inline bool completion_done(struct completion *x)
-{
- int ret = 1;
-
- spin_lock_irq(&x->wait.lock);
- if (!x->done)
- ret = 0;
- spin_unlock_irq(&x->wait.lock);
- return ret;
-}
-
#endif
*/
FILEID_INO32_GEN_PARENT = 2,
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number.
+ */
+ FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number,
+ * 64 bit parent object ID, 32 bit parent generation.
+ */
+ FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number,
+ * 64 bit parent object ID, 32 bit parent generation,
+ * 64 bit parent root object ID.
+ */
+ FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
/*
* 32 bit block number, 16 bit partition reference,
* 16 bit unused, 32 bit generation number.
/* drivers/video/fb_defio.c */
extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+ struct inode *inode,
+ struct file *file);
extern void fb_deferred_io_cleanup(struct fb_info *info);
extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
int datasync);
#endif
}
+/* Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore. */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FTRACE
+ int saved_ftrace_enabled = ftrace_enabled;
+ ftrace_enabled = 0;
+ return saved_ftrace_enabled;
+#else
+ return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FTRACE
+ ftrace_enabled = enabled;
+#endif
+}
+
#ifdef CONFIG_FRAME_POINTER
/* TODO: need to fix this for ARM */
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
* over Ethernet
*/
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
#ifndef __LINUX_IVTV_H__
#define __LINUX_IVTV_H__
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
#include <linux/types.h>
/* ivtv knows several distinct output modes: MPEG streaming,
#ifndef __LINUX_IVTVFB_H__
#define __LINUX_IVTVFB_H__
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
#include <linux/types.h>
/* Framebuffer external API */
#error KEXEC_CONTROL_MEMORY_LIMIT not defined
#endif
-#ifndef KEXEC_CONTROL_CODE_SIZE
-#error KEXEC_CONTROL_CODE_SIZE not defined
+#ifndef KEXEC_CONTROL_PAGE_SIZE
+#error KEXEC_CONTROL_PAGE_SIZE not defined
#endif
#ifndef KEXEC_ARCH
#endif
/*
- * vm_flags..
+ * vm_flags in vm_area_struct, see mm_types.h.
*/
#define VM_READ 0x00000001 /* currently active flags */
#define VM_WRITE 0x00000002
struct vm_area_struct *vm_next;
pgprot_t vm_page_prot; /* Access permissions of this VMA. */
- unsigned long vm_flags; /* Flags, listed below. */
+ unsigned long vm_flags; /* Flags, see mm.h. */
struct rb_node vm_rb;
{
return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING);
}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+ /* Find root host bridge */
+ while (pdev->bus->self)
+ pdev = pdev->bus->self;
+
+ return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+ pdev->bus->number);
+}
#else
#if !defined(AE_ERROR)
typedef u32 acpi_status;
{return AE_ERROR;}
static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;}
static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{ return NULL; }
#endif
#endif /* _PCI_ACPI_H_ */
#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
+#define PCI_DEVICE_ID_INTEL_PCH_0 0x3b10
+#define PCI_DEVICE_ID_INTEL_PCH_1 0x3b11
+#define PCI_DEVICE_ID_INTEL_PCH_2 0x3b30
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0
#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5
} \
} while (0)
+#define do_each_pid_thread(pid, type, task) \
+ do_each_pid_task(pid, type, task) { \
+ struct task_struct *tg___ = task; \
+ do {
+
+#define while_each_pid_thread(pid, type, task) \
+ } while_each_thread(tg___, task); \
+ task = tg___; \
+ } while_each_pid_task(pid, type, task)
#endif /* _LINUX_PID_H */
* Architecture independent implemenations of sys_reboot commands.
*/
+extern void kernel_restart_prepare(char *cmd);
extern void kernel_restart(char *cmd);
extern void kernel_halt(void);
extern void kernel_power_off(void);
RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */
RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */
RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */
+ RFKILL_STATE_MAX, /* marker for last valid state */
};
/*
};
#define to_rfkill(d) container_of(d, struct rfkill, dev)
-struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type);
+struct rfkill * __must_check rfkill_allocate(struct device *parent,
+ enum rfkill_type type);
void rfkill_free(struct rfkill *rfkill);
-int rfkill_register(struct rfkill *rfkill);
+int __must_check rfkill_register(struct rfkill *rfkill);
void rfkill_unregister(struct rfkill *rfkill);
int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state);
+int rfkill_set_default(enum rfkill_type type, enum rfkill_state state);
/**
* rfkill_state_complement - return complementar state
* Called from mm/filemap_xip.c to unmap empty zero page
*/
pte_t *page_check_address(struct page *, struct mm_struct *,
- unsigned long, spinlock_t **);
+ unsigned long, spinlock_t **, int);
/*
* Used by swapoff to help locate where page is expected in vma.
*/
extern int cap_capable(struct task_struct *tsk, int cap);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
- * @ptrace:
- * Check permission before allowing the @parent process to trace the
+ * @ptrace_may_access:
+ * Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
* during an execve in the set_security or apply_creds hooks of
* binprm_security_ops if the process is being traced and its security
* attributes would be changed by the execve.
- * @parent contains the task_struct structure for parent process.
- * @child contains the task_struct structure for child process.
+ * @child contains the task_struct structure for the target process.
* @mode contains the PTRACE_MODE flags indicating the form of access.
* Return 0 if permission is granted.
+ * @ptrace_traceme:
+ * Check that the @parent process has sufficient permission to trace the
+ * current process before allowing the current process to present itself
+ * to the @parent process for tracing.
+ * The parent process will still have to undergo the ptrace_may_access
+ * checks before it is allowed to trace this one.
+ * @parent contains the task_struct structure for debugger process.
+ * Return 0 if permission is granted.
* @capget:
* Get the @effective, @inheritable, and @permitted capability sets for
* the @target process. The hook may also perform permission checking to
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace) (struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+ int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+ int (*ptrace_traceme) (struct task_struct *parent);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void securityfs_remove(struct dentry *dentry);
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable,
return 0;
}
-static inline int security_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static inline int security_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
+{
+ return cap_ptrace_may_access(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *parent)
{
- return cap_ptrace(parent, child, mode);
+ return cap_ptrace_traceme(parent);
}
static inline int security_capget(struct task_struct *target,
#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void register_nosave_region(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region(unsigned long b, unsigned long e)
{
__register_nosave_region(b, e, 0);
}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
{
__register_nosave_region(b, e, 1);
}
extern void tty_driver_flush_buffer(struct tty_struct *tty);
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
+extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
*
* Optional: If not provided then the write method is called under
* the atomic write lock to keep it serialized with the ldisc.
+ *
+ * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ * unsigned int rows, unsigned int cols);
+ *
+ * Called when a termios request is issued which changes the
+ * requested terminal geometry.
+ *
+ * Optional: the default action is to update the termios structure
+ * without error. This is usually the correct behaviour. Drivers should
+ * not force errors here if they are not resizable objects (eg a serial
+ * line). See tty_do_resize() if you need to wrap the standard method
+ * in your own logic - the usual case.
*/
#include <linux/fs.h>
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+ int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
*/
#ifndef __LINUX_VIDEODEV2_H
#define __LINUX_VIDEODEV2_H
+
#ifdef __KERNEL__
#include <linux/time.h> /* need struct timeval */
-#include <linux/compiler.h> /* need __user */
#else
-#define __user
#include <sys/time.h>
#endif
+#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/page.h> /* pgprot_t */
-struct vm_area_struct;
+struct vm_area_struct; /* vma defining user mapping in mm_types.h */
-/* bits in vm_struct->flags */
+/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
#define VM_MAP 0x00000004 /* vmap()ed pages */
int vc_allocate(unsigned int console);
int vc_cons_allocated(unsigned int console);
int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
void vc_deallocate(unsigned int console);
void reset_palette(struct vc_data *vc);
void do_blank_screen(int entering_gfx);
* @RX_FLAG_TSFT: The timestamp passed in the RX status (@mactime field)
* is valid. This is useful in monitor mode and necessary for beacon frames
* to enable IBSS merging.
+ * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = 1<<0,
RX_FLAG_FAILED_FCS_CRC = 1<<5,
RX_FLAG_FAILED_PLCP_CRC = 1<<6,
RX_FLAG_TSFT = 1<<7,
+ RX_FLAG_SHORTPRE = 1<<8
};
/**
*/
unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
-/**
- * ieee80211_get_hdrlen - get header length from frame control
- *
- * This function returns the 802.11 header length in bytes (not including
- * encryption headers.)
- *
- * @fc: the frame control field (in CPU endianness)
- */
-int ieee80211_get_hdrlen(u16 fc);
-
/**
* ieee80211_hdrlen - get header length in bytes from frame control
* @fc: frame control field in little-endian format
*/
void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
+/**
+ * ieee80211_queue_stopped - test status of the queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+
+int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
+
/**
* ieee80211_stop_queues - stop all queues
* @hw: pointer as obtained from ieee80211_alloc_hw().
return qdisc->dev_queue->qdisc;
}
+static inline struct Qdisc *qdisc_root_sleeping(struct Qdisc *qdisc)
+{
+ return qdisc->dev_queue->qdisc_sleeping;
+}
+
/* The qdisc root lock is a mechanism by which to top level
* of a qdisc tree can be locked from any qdisc node in the
* forest. This allows changing the configuration of some
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/blkdev.h>
+#include <scsi/scsi.h>
#include <asm/atomic.h>
struct request_queue;
static inline int scsi_device_protection(struct scsi_device *sdev)
{
- return sdev->inquiry[5] & (1<<0);
+ return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
#define MODULE_ALIAS_SCSI_DEVICE(type) \
If unsure say Y here.
-config SYSCTL_SYSCALL_CHECK
- bool "Sysctl checks" if EMBEDDED
- depends on SYSCTL_SYSCALL
- default y
- ---help---
- sys_sysctl uses binary paths that have been found challenging
- to properly maintain and use. This enables checks that help
- you to keep things correct.
-
- If unsure say Y here.
-
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
return ret;
}
-int __capable(struct task_struct *t, int cap)
+/**
+ * capable - Determine if the current task has a superior capability in effect
+ * @cap: The capability to be tested for
+ *
+ * Return true if the current task has the given superior capability currently
+ * available for use, false if not.
+ *
+ * This sets PF_SUPERPRIV on the task if the capability is available on the
+ * assumption that it's about to be used.
+ */
+int capable(int cap)
{
- if (security_capable(t, cap) == 0) {
- t->flags |= PF_SUPERPRIV;
+ if (has_capability(current, cap)) {
+ current->flags |= PF_SUPERPRIV;
return 1;
}
return 0;
}
-
-int capable(int cap)
-{
- return __capable(current, cap);
-}
EXPORT_SYMBOL(capable);
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/kexec.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/highmem.h>
#include <linux/syscalls.h>
*
* The code for the transition from the current kernel to the
* the new kernel is placed in the control_code_buffer, whose size
- * is given by KEXEC_CONTROL_CODE_SIZE. In the best case only a single
+ * is given by KEXEC_CONTROL_PAGE_SIZE. In the best case only a single
* page of memory is necessary, but some architectures require more.
* Because this memory must be identity mapped in the transition from
* virtual to physical addresses it must live in the range
*/
result = -ENOMEM;
image->control_code_page = kimage_alloc_control_pages(image,
- get_order(KEXEC_CONTROL_CODE_SIZE));
+ get_order(KEXEC_CONTROL_PAGE_SIZE));
if (!image->control_code_page) {
printk(KERN_ERR "Could not allocate control_code_buffer\n");
goto out;
*/
result = -ENOMEM;
image->control_code_page = kimage_alloc_control_pages(image,
- get_order(KEXEC_CONTROL_CODE_SIZE));
+ get_order(KEXEC_CONTROL_PAGE_SIZE));
if (!image->control_code_page) {
printk(KERN_ERR "Could not allocate control_code_buffer\n");
goto out;
*/
struct kimage *kexec_image;
struct kimage *kexec_crash_image;
-/*
- * A home grown binary mutex.
- * Nothing can wait so this mutex is safe to use
- * in interrupt context :)
- */
-static int kexec_lock;
+
+static DEFINE_MUTEX(kexec_mutex);
asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
struct kexec_segment __user *segments,
unsigned long flags)
{
struct kimage **dest_image, *image;
- int locked;
int result;
/* We only trust the superuser with rebooting the system. */
*
* KISS: always take the mutex.
*/
- locked = xchg(&kexec_lock, 1);
- if (locked)
+ if (!mutex_trylock(&kexec_mutex))
return -EBUSY;
dest_image = &kexec_image;
image = xchg(dest_image, image);
out:
- locked = xchg(&kexec_lock, 0); /* Release the mutex */
- BUG_ON(!locked);
+ mutex_unlock(&kexec_mutex);
kimage_free(image);
return result;
void crash_kexec(struct pt_regs *regs)
{
- int locked;
-
-
- /* Take the kexec_lock here to prevent sys_kexec_load
+ /* Take the kexec_mutex here to prevent sys_kexec_load
* running on one cpu from replacing the crash kernel
* we are using after a panic on a different cpu.
*
* of memory the xchg(&kexec_crash_image) would be
* sufficient. But since I reuse the memory...
*/
- locked = xchg(&kexec_lock, 1);
- if (!locked) {
+ if (mutex_trylock(&kexec_mutex)) {
if (kexec_crash_image) {
struct pt_regs fixed_regs;
crash_setup_regs(&fixed_regs, regs);
machine_crash_shutdown(&fixed_regs);
machine_kexec(kexec_crash_image);
}
- locked = xchg(&kexec_lock, 0);
- BUG_ON(!locked);
+ mutex_unlock(&kexec_mutex);
}
}
module_init(crash_save_vmcoreinfo_init)
-/**
- * kernel_kexec - reboot the system
- *
- * Move into place and start executing a preloaded standalone
- * executable. If nothing was preloaded return an error.
+/*
+ * Move into place and start executing a preloaded standalone
+ * executable. If nothing was preloaded return an error.
*/
int kernel_kexec(void)
{
int error = 0;
- if (xchg(&kexec_lock, 1))
+ if (!mutex_trylock(&kexec_mutex))
return -EBUSY;
if (!kexec_image) {
error = -EINVAL;
goto Unlock;
}
- if (kexec_image->preserve_context) {
#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context) {
mutex_lock(&pm_mutex);
pm_prepare_console();
error = freeze_processes();
error = disable_nonboot_cpus();
if (error)
goto Resume_devices;
+ device_pm_lock();
local_irq_disable();
/* At this point, device_suspend() has been called,
* but *not* device_power_down(). We *must*
error = device_power_down(PMSG_FREEZE);
if (error)
goto Enable_irqs;
- save_processor_state();
+ } else
#endif
- } else {
- blocking_notifier_call_chain(&reboot_notifier_list,
- SYS_RESTART, NULL);
- system_state = SYSTEM_RESTART;
- device_shutdown();
- sysdev_shutdown();
+ {
+ kernel_restart_prepare(NULL);
printk(KERN_EMERG "Starting new kernel\n");
machine_shutdown();
}
machine_kexec(kexec_image);
- if (kexec_image->preserve_context) {
#ifdef CONFIG_KEXEC_JUMP
- restore_processor_state();
+ if (kexec_image->preserve_context) {
device_power_up(PMSG_RESTORE);
Enable_irqs:
local_irq_enable();
+ device_pm_unlock();
enable_nonboot_cpus();
Resume_devices:
device_resume(PMSG_RESTORE);
Restore_console:
pm_restore_console();
mutex_unlock(&pm_mutex);
-#endif
}
+#endif
Unlock:
- xchg(&kexec_lock, 0);
-
+ mutex_unlock(&kexec_mutex);
return error;
}
hlock = curr->held_locks + i;
if (chain_key != hlock->prev_chain_key) {
debug_locks_off();
- printk("hm#1, depth: %u [%u], %016Lx != %016Lx\n",
+ WARN(1, "hm#1, depth: %u [%u], %016Lx != %016Lx\n",
curr->lockdep_depth, i,
(unsigned long long)chain_key,
(unsigned long long)hlock->prev_chain_key);
- WARN_ON(1);
return;
}
id = hlock->class_idx - 1;
}
if (chain_key != curr->curr_chain_key) {
debug_locks_off();
- printk("hm#2, depth: %u [%u], %016Lx != %016Lx\n",
+ WARN(1, "hm#2, depth: %u [%u], %016Lx != %016Lx\n",
curr->lockdep_depth, i,
(unsigned long long)chain_key,
(unsigned long long)curr->curr_chain_key);
- WARN_ON(1);
}
#endif
}
hlock->trylock = trylock;
hlock->read = read;
hlock->check = check;
- hlock->hardirqs_off = hardirqs_off;
+ hlock->hardirqs_off = !!hardirqs_off;
#ifdef CONFIG_LOCK_STAT
hlock->waittime_stamp = 0;
hlock->holdtime_stamp = sched_clock();
extern unsigned int max_lockdep_depth;
extern unsigned int max_recursion_depth;
+#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
extern unsigned long lockdep_count_backward_deps(struct lock_class *);
+#else
+static inline unsigned long
+lockdep_count_forward_deps(struct lock_class *class)
+{
+ return 0;
+}
+static inline unsigned long
+lockdep_count_backward_deps(struct lock_class *class)
+{
+ return 0;
+}
+#endif
#ifdef CONFIG_DEBUG_LOCKDEP
/*
static int l_show(struct seq_file *m, void *v)
{
- unsigned long nr_forward_deps, nr_backward_deps;
struct lock_class *class = v;
struct lock_list *entry;
char c1, c2, c3, c4;
#ifdef CONFIG_DEBUG_LOCKDEP
seq_printf(m, " OPS:%8ld", class->ops);
#endif
- nr_forward_deps = lockdep_count_forward_deps(class);
- seq_printf(m, " FD:%5ld", nr_forward_deps);
-
- nr_backward_deps = lockdep_count_backward_deps(class);
- seq_printf(m, " BD:%5ld", nr_backward_deps);
+#ifdef CONFIG_PROVE_LOCKING
+ seq_printf(m, " FD:%5ld", lockdep_count_forward_deps(class));
+ seq_printf(m, " BD:%5ld", lockdep_count_backward_deps(class));
+#endif
get_usage_chars(class, &c1, &c2, &c3, &c4);
seq_printf(m, " %c%c%c%c", c1, c2, c3, c4);
if (class->usage_mask & LOCKF_ENABLED_HARDIRQS_READ)
nr_hardirq_read_unsafe++;
+#ifdef CONFIG_PROVE_LOCKING
sum_forward_deps += lockdep_count_forward_deps(class);
+#endif
}
#ifdef CONFIG_DEBUG_LOCKDEP
DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
if (!dumpable && !capable(CAP_SYS_PTRACE))
return -EPERM;
- return security_ptrace(current, task, mode);
+ return security_ptrace_may_access(task, mode);
}
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
goto repeat;
}
- ret = security_ptrace(current->parent, current,
- PTRACE_MODE_ATTACH);
+ ret = security_ptrace_traceme(current->parent);
/*
* Set the ptrace bit in the process ptrace flags.
/*
* ratelimit for updating the group shares.
- * default: 0.5ms
+ * default: 0.25ms
*/
-const_debug unsigned int sysctl_sched_shares_ratelimit = 500000;
+unsigned int sysctl_sched_shares_ratelimit = 250000;
/*
* period over which we measure -rt task cpu usage in us.
}
EXPORT_SYMBOL(wait_for_completion_killable);
+/**
+ * try_wait_for_completion - try to decrement a completion without blocking
+ * @x: completion structure
+ *
+ * Returns: 0 if a decrement cannot be done without blocking
+ * 1 if a decrement succeeded.
+ *
+ * If a completion is being used as a counting completion,
+ * attempt to decrement the counter without blocking. This
+ * enables us to avoid waiting if the resource the completion
+ * is protecting is not available.
+ */
+bool try_wait_for_completion(struct completion *x)
+{
+ int ret = 1;
+
+ spin_lock_irq(&x->wait.lock);
+ if (!x->done)
+ ret = 0;
+ else
+ x->done--;
+ spin_unlock_irq(&x->wait.lock);
+ return ret;
+}
+EXPORT_SYMBOL(try_wait_for_completion);
+
+/**
+ * completion_done - Test to see if a completion has any waiters
+ * @x: completion structure
+ *
+ * Returns: 0 if there are waiters (wait_for_completion() in progress)
+ * 1 if there are no waiters.
+ *
+ */
+bool completion_done(struct completion *x)
+{
+ int ret = 1;
+
+ spin_lock_irq(&x->wait.lock);
+ if (!x->done)
+ ret = 0;
+ spin_unlock_irq(&x->wait.lock);
+ return ret;
+}
+EXPORT_SYMBOL(completion_done);
+
static long __sched
sleep_on_common(wait_queue_head_t *q, int state, long timeout)
{
sysctl_sched_latency = limit;
sysctl_sched_wakeup_granularity *= factor;
+
+ sysctl_sched_shares_ratelimit *= factor;
}
#ifdef CONFIG_SMP
WARN_ON(!parent); /* root should already exist */
tg->parent = parent;
- list_add_rcu(&tg->siblings, &parent->children);
INIT_LIST_HEAD(&tg->children);
+ list_add_rcu(&tg->siblings, &parent->children);
spin_unlock_irqrestore(&task_group_lock, flags);
return tg;
struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i);
s64 diff;
- if (iter == rt_rq)
+ if (iter == rt_rq || iter->rt_runtime == RUNTIME_INF)
continue;
spin_lock(&iter->rt_runtime_lock);
struct siginfo info;
unsigned long flags;
struct sighand_struct *psig;
+ int ret = sig;
BUG_ON(sig == -1);
* is implementation-defined: we do (if you don't want
* it, just use SIG_IGN instead).
*/
- tsk->exit_signal = -1;
+ ret = tsk->exit_signal = -1;
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
sig = -1;
}
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
- return sig;
+ return ret;
}
static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
spin_acquire(&lock->dep_map, subclass, 0, _RET_IP_);
LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
}
-
EXPORT_SYMBOL(_spin_lock_nested);
unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass)
#endif
return flags;
}
-
EXPORT_SYMBOL(_spin_lock_irqsave_nested);
void __lockfunc _spin_lock_nest_lock(spinlock_t *lock,
spin_acquire_nest(&lock->dep_map, 0, 0, nest_lock, _RET_IP_);
LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
}
-
EXPORT_SYMBOL(_spin_lock_nest_lock);
#endif
pgrp = find_vpid(who);
else
pgrp = task_pgrp(current);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
error = set_one_prio(p, niceval, error);
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
pgrp = find_vpid(who);
else
pgrp = task_pgrp(current);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
niceval = 20 - task_nice(p);
if (niceval > retval)
retval = niceval;
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
}
EXPORT_SYMBOL_GPL(emergency_restart);
-static void kernel_restart_prepare(char *cmd)
+void kernel_restart_prepare(char *cmd)
{
blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
system_state = SYSTEM_RESTART;
Enable this option if you want to use the LatencyTOP tool
to find out which userspace is blocking on what kernel operations.
+config SYSCTL_SYSCALL_CHECK
+ bool "Sysctl checks"
+ depends on SYSCTL_SYSCALL
+ ---help---
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. This enables checks that help
+ you to keep things correct.
+
source kernel/trace/Kconfig
config PROVIDE_OHCI1394_DMA_INIT
if (lmb.memory.region[0].size < lmb.rmo_size)
lmb.rmo_size = lmb.memory.region[0].size;
+ memory_limit = lmb_end_of_DRAM();
+
/* And truncate any reserves above the limit also. */
for (i = 0; i < lmb.reserved.cnt; i++) {
p = &lmb.reserved.region[i];
}
#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+static unsigned long align_idx(struct bootmem_data *bdata, unsigned long idx,
+ unsigned long step)
+{
+ unsigned long base = bdata->node_min_pfn;
+
+ /*
+ * Align the index with respect to the node start so that the
+ * combination of both satisfies the requested alignment.
+ */
+
+ return ALIGN(base + idx, step) - base;
+}
+
+static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,
+ unsigned long align)
+{
+ unsigned long base = PFN_PHYS(bdata->node_min_pfn);
+
+ /* Same as align_idx for byte offsets */
+
+ return ALIGN(base + off, align) - base;
+}
+
static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
else
start = ALIGN(min, step);
- sidx = start - bdata->node_min_pfn;;
+ sidx = start - bdata->node_min_pfn;
midx = max - bdata->node_min_pfn;
if (bdata->hint_idx > sidx) {
* catch the fallback below.
*/
fallback = sidx + 1;
- sidx = ALIGN(bdata->hint_idx, step);
+ sidx = align_idx(bdata, bdata->hint_idx, step);
}
while (1) {
unsigned long eidx, i, start_off, end_off;
find_block:
sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
- sidx = ALIGN(sidx, step);
+ sidx = align_idx(bdata, sidx, step);
eidx = sidx + PFN_UP(size);
if (sidx >= midx || eidx > midx)
for (i = sidx; i < eidx; i++)
if (test_bit(i, bdata->node_bootmem_map)) {
- sidx = ALIGN(i, step);
+ sidx = align_idx(bdata, i, step);
if (sidx == i)
sidx += step;
goto find_block;
}
- if (bdata->last_end_off &&
+ if (bdata->last_end_off & (PAGE_SIZE - 1) &&
PFN_DOWN(bdata->last_end_off) + 1 == sidx)
- start_off = ALIGN(bdata->last_end_off, align);
+ start_off = align_off(bdata, bdata->last_end_off, align);
else
start_off = PFN_PHYS(sidx);
}
if (fallback) {
- sidx = ALIGN(fallback - 1, step);
+ sidx = align_idx(bdata, fallback - 1, step);
fallback = 0;
goto find_block;
}
#include <linux/rmap.h>
#include <linux/mmu_notifier.h>
#include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
* We do use our own empty page to avoid interference with other users
* of ZERO_PAGE(), such as /dev/zero
*/
+static DEFINE_MUTEX(xip_sparse_mutex);
+static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
static struct page *__xip_sparse_page;
+/* called under xip_sparse_mutex */
static struct page *xip_sparse_page(void)
{
if (!__xip_sparse_page) {
struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
- if (page) {
- static DEFINE_SPINLOCK(xip_alloc_lock);
- spin_lock(&xip_alloc_lock);
- if (!__xip_sparse_page)
- __xip_sparse_page = page;
- else
- __free_page(page);
- spin_unlock(&xip_alloc_lock);
- }
+ if (page)
+ __xip_sparse_page = page;
}
return __xip_sparse_page;
}
pte_t pteval;
spinlock_t *ptl;
struct page *page;
+ unsigned count;
+ int locked = 0;
+
+ count = read_seqcount_begin(&xip_sparse_seq);
page = __xip_sparse_page;
if (!page)
return;
+retry:
spin_lock(&mapping->i_mmap_lock);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
mm = vma->vm_mm;
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 1);
if (pte) {
/* Nuke the page table entry. */
flush_cache_page(vma, address, pte_pfn(*pte));
}
}
spin_unlock(&mapping->i_mmap_lock);
+
+ if (locked) {
+ mutex_unlock(&xip_sparse_mutex);
+ } else if (read_seqcount_retry(&xip_sparse_seq, count)) {
+ mutex_lock(&xip_sparse_mutex);
+ locked = 1;
+ goto retry;
+ }
}
/*
int error;
/* XXX: are VM_FAULT_ codes OK? */
-
+again:
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (vmf->pgoff >= size)
return VM_FAULT_SIGBUS;
int err;
/* maybe shared writable, allocate new block */
+ mutex_lock(&xip_sparse_mutex);
error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
&xip_mem, &xip_pfn);
+ mutex_unlock(&xip_sparse_mutex);
if (error)
return VM_FAULT_SIGBUS;
/* unmap sparse mappings at pgoff from all other vmas */
BUG_ON(err);
return VM_FAULT_NOPAGE;
} else {
+ int err, ret = VM_FAULT_OOM;
+
+ mutex_lock(&xip_sparse_mutex);
+ write_seqcount_begin(&xip_sparse_seq);
+ error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
+ &xip_mem, &xip_pfn);
+ if (unlikely(!error)) {
+ write_seqcount_end(&xip_sparse_seq);
+ mutex_unlock(&xip_sparse_mutex);
+ goto again;
+ }
+ if (error != -ENODATA)
+ goto out;
/* not shared and writable, use xip_sparse_page() */
page = xip_sparse_page();
if (!page)
- return VM_FAULT_OOM;
+ goto out;
+ err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
+ page);
+ if (err == -ENOMEM)
+ goto out;
- page_cache_get(page);
- vmf->page = page;
- return 0;
+ ret = VM_FAULT_NOPAGE;
+out:
+ write_seqcount_end(&xip_sparse_seq);
+ mutex_unlock(&xip_sparse_mutex);
+
+ return ret;
}
}
&xip_mem, &xip_pfn);
if (status == -ENODATA) {
/* we allocate a new page unmap it */
+ mutex_lock(&xip_sparse_mutex);
status = a_ops->get_xip_mem(mapping, index, 1,
&xip_mem, &xip_pfn);
+ mutex_unlock(&xip_sparse_mutex);
if (!status)
/* unmap page at pgoff from all other vmas */
__xip_unmap(mapping, index);
#include "internal.h"
#ifdef CONFIG_DEBUG_MEMORY_INIT
-int __meminitdata mminit_loglevel;
+int mminit_loglevel;
#ifndef SECTIONS_SHIFT
#define SECTIONS_SHIFT 0
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/memcontrol.h>
+#include <linux/security.h>
int sysctl_panic_on_oom;
int sysctl_oom_kill_allocating_task;
* Superuser processes are usually more important, so we make it
* less likely that we kill those.
*/
- if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE))
+ if (has_capability(p, CAP_SYS_ADMIN) ||
+ has_capability(p, CAP_SYS_RESOURCE))
points /= 4;
/*
* tend to only have this flag set on applications they think
* of as important.
*/
- if (__capable(p, CAP_SYS_RAWIO))
+ if (has_capability(p, CAP_SYS_RAWIO))
points /= 4;
/*
/*
* Check that @page is mapped at @address into @mm.
*
+ * If @sync is false, page_check_address may perform a racy check to avoid
+ * the page table lock when the pte is not present (helpful when reclaiming
+ * highly shared pages).
+ *
* On success returns with pte mapped and locked.
*/
pte_t *page_check_address(struct page *page, struct mm_struct *mm,
- unsigned long address, spinlock_t **ptlp)
+ unsigned long address, spinlock_t **ptlp, int sync)
{
pgd_t *pgd;
pud_t *pud;
pte = pte_offset_map(pmd, address);
/* Make a quick check before getting the lock */
- if (!pte_present(*pte)) {
+ if (!sync && !pte_present(*pte)) {
pte_unmap(pte);
return NULL;
}
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 0);
if (!pte)
goto out;
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 1);
if (!pte)
goto out;
}
/*
- * It would be tidy to reset the PageAnon mapping here,
- * but that might overwrite a racing page_add_anon_rmap
- * which increments mapcount after us but sets mapping
- * before us: so leave the reset to free_hot_cold_page,
- * and remember that it's only reliable while mapped.
- * Leaving it set also helps swapoff to reinstate ptes
- * faster for those pages still in swapcache.
+ * Now that the last pte has gone, s390 must transfer dirty
+ * flag from storage key to struct page. We can usually skip
+ * this if the page is anon, so about to be freed; but perhaps
+ * not if it's in swapcache - there might be another pte slot
+ * containing the swap entry, but page not yet written to swap.
*/
if ((!PageAnon(page) || PageSwapCache(page)) &&
page_test_dirty(page)) {
page_clear_dirty(page);
set_page_dirty(page);
}
- mem_cgroup_uncharge_page(page);
+ mem_cgroup_uncharge_page(page);
__dec_zone_page_state(page,
- PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+ PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+ /*
+ * It would be tidy to reset the PageAnon mapping here,
+ * but that might overwrite a racing page_add_anon_rmap
+ * which increments mapcount after us but sets mapping
+ * before us: so leave the reset to free_hot_cold_page,
+ * and remember that it's only reliable while mapped.
+ * Leaving it set also helps swapoff to reinstate ptes
+ * faster for those pages still in swapcache.
+ */
}
}
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 0);
if (!pte)
goto out;
printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
swap_cache_info.add_total, swap_cache_info.del_total,
swap_cache_info.find_success, swap_cache_info.find_total);
- printk("Free swap = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
+ printk("Free swap = %ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10));
}
config FIB_RULES
bool
-menu "Wireless"
+menuconfig WIRELESS
+ bool "Wireless"
depends on !S390
+ default y
+
+if WIRELESS
source "net/wireless/Kconfig"
source "net/mac80211/Kconfig"
source "net/ieee80211/Kconfig"
-endmenu
+endif # WIRELESS
source "net/rfkill/Kconfig"
source "net/9p/Kconfig"
subsys_initcall(bt_init);
module_exit(bt_exit);
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth Core ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(compress_dst, bool, 0644);
MODULE_PARM_DESC(compress_dst, "Compress destination headers");
-MODULE_AUTHOR("David Libault <david.libault@inventel.fr>, Maxim Krasnyansky <maxk@qualcomm.com>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth BNEP ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#undef BT_DBG
#define BT_DBG(D...)
#endif
+
+struct class *bt_class = NULL;
+EXPORT_SYMBOL_GPL(bt_class);
+
static struct workqueue_struct *btaddconn;
static struct workqueue_struct *btdelconn;
-static inline char *typetostr(int type)
+static inline char *link_typetostr(int type)
+{
+ switch (type) {
+ case ACL_LINK:
+ return "ACL";
+ case SCO_LINK:
+ return "SCO";
+ case ESCO_LINK:
+ return "eSCO";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static ssize_t show_link_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", link_typetostr(conn->type));
+}
+
+static ssize_t show_link_address(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+ bdaddr_t bdaddr;
+ baswap(&bdaddr, &conn->dst);
+ return sprintf(buf, "%s\n", batostr(&bdaddr));
+}
+
+static ssize_t show_link_features(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+
+ return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ conn->features[0], conn->features[1],
+ conn->features[2], conn->features[3],
+ conn->features[4], conn->features[5],
+ conn->features[6], conn->features[7]);
+}
+
+#define LINK_ATTR(_name,_mode,_show,_store) \
+struct device_attribute link_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+static LINK_ATTR(type, S_IRUGO, show_link_type, NULL);
+static LINK_ATTR(address, S_IRUGO, show_link_address, NULL);
+static LINK_ATTR(features, S_IRUGO, show_link_features, NULL);
+
+static struct attribute *bt_link_attrs[] = {
+ &link_attr_type.attr,
+ &link_attr_address.attr,
+ &link_attr_features.attr,
+ NULL
+};
+
+static struct attribute_group bt_link_group = {
+ .attrs = bt_link_attrs,
+};
+
+static struct attribute_group *bt_link_groups[] = {
+ &bt_link_group,
+ NULL
+};
+
+static void bt_link_release(struct device *dev)
+{
+ void *data = dev_get_drvdata(dev);
+ kfree(data);
+}
+
+static struct device_type bt_link = {
+ .name = "link",
+ .groups = bt_link_groups,
+ .release = bt_link_release,
+};
+
+static void add_conn(struct work_struct *work)
+{
+ struct hci_conn *conn = container_of(work, struct hci_conn, work);
+
+ flush_workqueue(btdelconn);
+
+ if (device_add(&conn->dev) < 0) {
+ BT_ERR("Failed to register connection device");
+ return;
+ }
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ BT_DBG("conn %p", conn);
+
+ conn->dev.type = &bt_link;
+ conn->dev.class = bt_class;
+ conn->dev.parent = &hdev->dev;
+
+ snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
+ hdev->name, conn->handle);
+
+ dev_set_drvdata(&conn->dev, conn);
+
+ device_initialize(&conn->dev);
+
+ INIT_WORK(&conn->work, add_conn);
+
+ queue_work(btaddconn, &conn->work);
+}
+
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
+static int __match_tty(struct device *dev, void *data)
+{
+ return !strncmp(dev->bus_id, "rfcomm", 6);
+}
+
+static void del_conn(struct work_struct *work)
+{
+ struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_dev *hdev = conn->hdev;
+
+ while (1) {
+ struct device *dev;
+
+ dev = device_find_child(&conn->dev, NULL, __match_tty);
+ if (!dev)
+ break;
+ device_move(dev, NULL);
+ put_device(dev);
+ }
+
+ device_del(&conn->dev);
+ put_device(&conn->dev);
+ hci_dev_put(hdev);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ if (!device_is_registered(&conn->dev))
+ return;
+
+ INIT_WORK(&conn->work, del_conn);
+
+ queue_work(btdelconn, &conn->work);
+}
+
+static inline char *host_typetostr(int type)
{
switch (type) {
case HCI_VIRTUAL:
static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", typetostr(hdev->type));
+ return sprintf(buf, "%s\n", host_typetostr(hdev->type));
}
static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
static DEVICE_ATTR(sniff_min_interval, S_IRUGO | S_IWUSR,
show_sniff_min_interval, store_sniff_min_interval);
-static struct device_attribute *bt_attrs[] = {
- &dev_attr_type,
- &dev_attr_name,
- &dev_attr_class,
- &dev_attr_address,
- &dev_attr_features,
- &dev_attr_manufacturer,
- &dev_attr_hci_version,
- &dev_attr_hci_revision,
- &dev_attr_inquiry_cache,
- &dev_attr_idle_timeout,
- &dev_attr_sniff_max_interval,
- &dev_attr_sniff_min_interval,
+static struct attribute *bt_host_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_name.attr,
+ &dev_attr_class.attr,
+ &dev_attr_address.attr,
+ &dev_attr_features.attr,
+ &dev_attr_manufacturer.attr,
+ &dev_attr_hci_version.attr,
+ &dev_attr_hci_revision.attr,
+ &dev_attr_inquiry_cache.attr,
+ &dev_attr_idle_timeout.attr,
+ &dev_attr_sniff_max_interval.attr,
+ &dev_attr_sniff_min_interval.attr,
NULL
};
-static ssize_t show_conn_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", conn->type == ACL_LINK ? "ACL" : "SCO");
-}
-
-static ssize_t show_conn_address(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
- bdaddr_t bdaddr;
- baswap(&bdaddr, &conn->dst);
- return sprintf(buf, "%s\n", batostr(&bdaddr));
-}
-
-static ssize_t show_conn_features(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
-
- return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
- conn->features[0], conn->features[1],
- conn->features[2], conn->features[3],
- conn->features[4], conn->features[5],
- conn->features[6], conn->features[7]);
-}
-
-#define CONN_ATTR(_name,_mode,_show,_store) \
-struct device_attribute conn_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-static CONN_ATTR(type, S_IRUGO, show_conn_type, NULL);
-static CONN_ATTR(address, S_IRUGO, show_conn_address, NULL);
-static CONN_ATTR(features, S_IRUGO, show_conn_features, NULL);
-
-static struct device_attribute *conn_attrs[] = {
- &conn_attr_type,
- &conn_attr_address,
- &conn_attr_features,
- NULL
+static struct attribute_group bt_host_group = {
+ .attrs = bt_host_attrs,
};
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
-
-static struct bus_type bt_bus = {
- .name = "bluetooth",
+static struct attribute_group *bt_host_groups[] = {
+ &bt_host_group,
+ NULL
};
-static struct platform_device *bt_platform;
-
-static void bt_release(struct device *dev)
+static void bt_host_release(struct device *dev)
{
void *data = dev_get_drvdata(dev);
kfree(data);
}
-static void add_conn(struct work_struct *work)
-{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
- int i;
-
- flush_workqueue(btdelconn);
-
- if (device_add(&conn->dev) < 0) {
- BT_ERR("Failed to register connection device");
- return;
- }
-
- for (i = 0; conn_attrs[i]; i++)
- if (device_create_file(&conn->dev, conn_attrs[i]) < 0)
- BT_ERR("Failed to create connection attribute");
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- BT_DBG("conn %p", conn);
-
- conn->dev.bus = &bt_bus;
- conn->dev.parent = &hdev->dev;
-
- conn->dev.release = bt_release;
-
- snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
- hdev->name, conn->handle);
-
- dev_set_drvdata(&conn->dev, conn);
-
- device_initialize(&conn->dev);
-
- INIT_WORK(&conn->work, add_conn);
-
- queue_work(btaddconn, &conn->work);
-}
-
-/*
- * The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- */
-static int __match_tty(struct device *dev, void *data)
-{
- return !strncmp(dev->bus_id, "rfcomm", 6);
-}
-
-static void del_conn(struct work_struct *work)
-{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
- struct hci_dev *hdev = conn->hdev;
-
- while (1) {
- struct device *dev;
-
- dev = device_find_child(&conn->dev, NULL, __match_tty);
- if (!dev)
- break;
- device_move(dev, NULL);
- put_device(dev);
- }
-
- device_del(&conn->dev);
- put_device(&conn->dev);
- hci_dev_put(hdev);
-}
-
-void hci_conn_del_sysfs(struct hci_conn *conn)
-{
- BT_DBG("conn %p", conn);
-
- if (!device_is_registered(&conn->dev))
- return;
-
- INIT_WORK(&conn->work, del_conn);
-
- queue_work(btdelconn, &conn->work);
-}
+static struct device_type bt_host = {
+ .name = "host",
+ .groups = bt_host_groups,
+ .release = bt_host_release,
+};
int hci_register_sysfs(struct hci_dev *hdev)
{
struct device *dev = &hdev->dev;
- unsigned int i;
int err;
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
- dev->bus = &bt_bus;
+ dev->type = &bt_host;
+ dev->class = bt_class;
dev->parent = hdev->parent;
strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
- dev->release = bt_release;
-
dev_set_drvdata(dev, hdev);
err = device_register(dev);
if (err < 0)
return err;
- for (i = 0; bt_attrs[i]; i++)
- if (device_create_file(dev, bt_attrs[i]) < 0)
- BT_ERR("Failed to create device attribute");
-
return 0;
}
int __init bt_sysfs_init(void)
{
- int err;
-
btaddconn = create_singlethread_workqueue("btaddconn");
- if (!btaddconn) {
- err = -ENOMEM;
- goto out;
- }
+ if (!btaddconn)
+ return -ENOMEM;
btdelconn = create_singlethread_workqueue("btdelconn");
if (!btdelconn) {
- err = -ENOMEM;
- goto out_del;
- }
-
- bt_platform = platform_device_register_simple("bluetooth", -1, NULL, 0);
- if (IS_ERR(bt_platform)) {
- err = PTR_ERR(bt_platform);
- goto out_platform;
+ destroy_workqueue(btaddconn);
+ return -ENOMEM;
}
- err = bus_register(&bt_bus);
- if (err < 0)
- goto out_bus;
-
bt_class = class_create(THIS_MODULE, "bluetooth");
if (IS_ERR(bt_class)) {
- err = PTR_ERR(bt_class);
- goto out_class;
+ destroy_workqueue(btdelconn);
+ destroy_workqueue(btaddconn);
+ return PTR_ERR(bt_class);
}
return 0;
-
-out_class:
- bus_unregister(&bt_bus);
-out_bus:
- platform_device_unregister(bt_platform);
-out_platform:
- destroy_workqueue(btdelconn);
-out_del:
- destroy_workqueue(btaddconn);
-out:
- return err;
}
void bt_sysfs_cleanup(void)
{
destroy_workqueue(btaddconn);
-
destroy_workqueue(btdelconn);
class_destroy(bt_class);
-
- bus_unregister(&bt_bus);
-
- platform_device_unregister(bt_platform);
}
module_init(l2cap_init);
module_exit(l2cap_exit);
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(l2cap_mtu, uint, 0644);
MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(disable_esco, bool, 0644);
MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth SCO ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
qdisc_run(q);
spin_unlock(root_lock);
} else {
- __netif_reschedule(q);
+ if (!test_bit(__QDISC_STATE_DEACTIVATED,
+ &q->state))
+ __netif_reschedule(q);
}
}
}
static struct gen_estimator_head elist[EST_MAX_INTERVAL+1];
-/* Protects against NULL dereference and RCU write-side */
+/* Protects against NULL dereference */
static DEFINE_RWLOCK(est_lock);
static void est_timer(unsigned long arg)
est->last_packets = bstats->packets;
est->avpps = rate_est->pps<<10;
- write_lock_bh(&est_lock);
if (!elist[idx].timer.function) {
INIT_LIST_HEAD(&elist[idx].list);
setup_timer(&elist[idx].timer, est_timer, idx);
mod_timer(&elist[idx].timer, jiffies + ((HZ/4) << idx));
list_add_rcu(&est->list, &elist[idx].list);
- write_unlock_bh(&est_lock);
return 0;
}
* Removes the rate estimator specified by &bstats and &rate_est
* and deletes the timer.
*
+ * NOTE: Called under rtnl_mutex
*/
void gen_kill_estimator(struct gnet_stats_basic *bstats,
struct gnet_stats_rate_est *rate_est)
if (!elist[idx].timer.function)
continue;
- write_lock_bh(&est_lock);
list_for_each_entry_safe(e, n, &elist[idx].list, list) {
if (e->rate_est != rate_est || e->bstats != bstats)
continue;
+ write_lock_bh(&est_lock);
e->bstats = NULL;
+ write_unlock_bh(&est_lock);
list_del_rcu(&e->list);
call_rcu(&e->e_rcu, __gen_kill_estimator);
}
- write_unlock_bh(&est_lock);
}
}
err = ieee80211_networks_allocate(ieee);
if (err) {
IEEE80211_ERROR("Unable to allocate beacon storage: %d\n", err);
- goto failed;
+ goto failed_free_netdev;
}
ieee80211_networks_initialize(ieee);
return dev;
- failed:
- if (dev)
- free_netdev(dev);
+failed_free_netdev:
+ free_netdev(dev);
+failed:
return NULL;
}
}
}
+static int tcp_parse_aligned_timestamp(struct tcp_sock *tp, struct tcphdr *th)
+{
+ __be32 *ptr = (__be32 *)(th + 1);
+
+ if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+ | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+ tp->rx_opt.saw_tstamp = 1;
+ ++ptr;
+ tp->rx_opt.rcv_tsval = ntohl(*ptr);
+ ++ptr;
+ tp->rx_opt.rcv_tsecr = ntohl(*ptr);
+ return 1;
+ }
+ return 0;
+}
+
/* Fast parse options. This hopes to only see timestamps.
* If it is wrong it falls back on tcp_parse_options().
*/
return 0;
} else if (tp->rx_opt.tstamp_ok &&
th->doff == (sizeof(struct tcphdr)>>2)+(TCPOLEN_TSTAMP_ALIGNED>>2)) {
- __be32 *ptr = (__be32 *)(th + 1);
- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
- tp->rx_opt.rcv_tsval = ntohl(*ptr);
- ++ptr;
- tp->rx_opt.rcv_tsecr = ntohl(*ptr);
+ if (tcp_parse_aligned_timestamp(tp, th))
return 1;
- }
}
tcp_parse_options(skb, &tp->rx_opt, 1);
return 1;
}
}
+static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
+ struct sk_buff_head *list)
+{
+ struct sk_buff *next = skb->next;
+
+ __skb_unlink(skb, list);
+ __kfree_skb(skb);
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPRCVCOLLAPSED);
+
+ return next;
+}
+
/* Collapse contiguous sequence of skbs head..tail with
* sequence numbers start..end.
* Segments with FIN/SYN are not collapsed (only because this
for (skb = head; skb != tail;) {
/* No new bits? It is possible on ofo queue. */
if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
- struct sk_buff *next = skb->next;
- __skb_unlink(skb, list);
- __kfree_skb(skb);
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPRCVCOLLAPSED);
- skb = next;
+ skb = tcp_collapse_one(sk, skb, list);
continue;
}
start += size;
}
if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
- struct sk_buff *next = skb->next;
- __skb_unlink(skb, list);
- __kfree_skb(skb);
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPRCVCOLLAPSED);
- skb = next;
+ skb = tcp_collapse_one(sk, skb, list);
if (skb == tail ||
tcp_hdr(skb)->syn ||
tcp_hdr(skb)->fin)
}
#endif /* CONFIG_NET_DMA */
+/* Does PAWS and seqno based validation of an incoming segment, flags will
+ * play significant role here.
+ */
+static int tcp_validate_incoming(struct sock *sk, struct sk_buff *skb,
+ struct tcphdr *th, int syn_inerr)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+
+ /* RFC1323: H1. Apply PAWS check first. */
+ if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
+ tcp_paws_discard(sk, skb)) {
+ if (!th->rst) {
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
+ tcp_send_dupack(sk, skb);
+ goto discard;
+ }
+ /* Reset is accepted even if it did not pass PAWS. */
+ }
+
+ /* Step 1: check sequence number */
+ if (!tcp_sequence(tp, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq)) {
+ /* RFC793, page 37: "In all states except SYN-SENT, all reset
+ * (RST) segments are validated by checking their SEQ-fields."
+ * And page 69: "If an incoming segment is not acceptable,
+ * an acknowledgment should be sent in reply (unless the RST
+ * bit is set, if so drop the segment and return)".
+ */
+ if (!th->rst)
+ tcp_send_dupack(sk, skb);
+ goto discard;
+ }
+
+ /* Step 2: check RST bit */
+ if (th->rst) {
+ tcp_reset(sk);
+ goto discard;
+ }
+
+ /* ts_recent update must be made after we are sure that the packet
+ * is in window.
+ */
+ tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
+ /* step 3: check security and precedence [ignored] */
+
+ /* step 4: Check for a SYN in window. */
+ if (th->syn && !before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
+ if (syn_inerr)
+ TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_INERRS);
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPABORTONSYN);
+ tcp_reset(sk);
+ return -1;
+ }
+
+ return 1;
+
+discard:
+ __kfree_skb(skb);
+ return 0;
+}
+
/*
* TCP receive function for the ESTABLISHED state.
*
struct tcphdr *th, unsigned len)
{
struct tcp_sock *tp = tcp_sk(sk);
+ int res;
/*
* Header prediction.
/* Check timestamp */
if (tcp_header_len == sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED) {
- __be32 *ptr = (__be32 *)(th + 1);
-
/* No? Slow path! */
- if (*ptr != htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP))
+ if (!tcp_parse_aligned_timestamp(tp, th))
goto slow_path;
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
- tp->rx_opt.rcv_tsval = ntohl(*ptr);
- ++ptr;
- tp->rx_opt.rcv_tsecr = ntohl(*ptr);
-
/* If PAWS failed, check it more carefully in slow path */
if ((s32)(tp->rx_opt.rcv_tsval - tp->rx_opt.ts_recent) < 0)
goto slow_path;
if (len < (th->doff << 2) || tcp_checksum_complete_user(sk, skb))
goto csum_error;
- /*
- * RFC1323: H1. Apply PAWS check first.
- */
- if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
- tcp_paws_discard(sk, skb)) {
- if (!th->rst) {
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
- tcp_send_dupack(sk, skb);
- goto discard;
- }
- /* Resets are accepted even if PAWS failed.
-
- ts_recent update must be made after we are sure
- that the packet is in window.
- */
- }
-
/*
* Standard slow path.
*/
- if (!tcp_sequence(tp, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq)) {
- /* RFC793, page 37: "In all states except SYN-SENT, all reset
- * (RST) segments are validated by checking their SEQ-fields."
- * And page 69: "If an incoming segment is not acceptable,
- * an acknowledgment should be sent in reply (unless the RST bit
- * is set, if so drop the segment and return)".
- */
- if (!th->rst)
- tcp_send_dupack(sk, skb);
- goto discard;
- }
-
- if (th->rst) {
- tcp_reset(sk);
- goto discard;
- }
-
- tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
-
- if (th->syn && !before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
- TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_INERRS);
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPABORTONSYN);
- tcp_reset(sk);
- return 1;
- }
+ res = tcp_validate_incoming(sk, skb, th, 1);
+ if (res <= 0)
+ return -res;
step5:
if (th->ack)
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
int queued = 0;
+ int res;
tp->rx_opt.saw_tstamp = 0;
return 0;
}
- if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
- tcp_paws_discard(sk, skb)) {
- if (!th->rst) {
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
- tcp_send_dupack(sk, skb);
- goto discard;
- }
- /* Reset is accepted even if it did not pass PAWS. */
- }
-
- /* step 1: check sequence number */
- if (!tcp_sequence(tp, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq)) {
- if (!th->rst)
- tcp_send_dupack(sk, skb);
- goto discard;
- }
-
- /* step 2: check RST bit */
- if (th->rst) {
- tcp_reset(sk);
- goto discard;
- }
-
- tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
-
- /* step 3: check security and precedence [ignored] */
-
- /* step 4:
- *
- * Check for a SYN in window.
- */
- if (th->syn && !before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPABORTONSYN);
- tcp_reset(sk);
- return 1;
- }
+ res = tcp_validate_incoming(sk, skb, th, 0);
+ if (res <= 0)
+ return -res;
/* step 5: check the ACK field */
if (th->ack) {
static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex)
{
struct net_device *dev;
+ struct ieee80211_sub_if_data *sdata;
/* we're under RTNL */
dev = __dev_get_by_index(&init_net, ifindex);
if (!dev)
return -ENODEV;
- ieee80211_if_remove(dev);
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ ieee80211_if_remove(sdata);
return 0;
}
return -ENOENT;
}
- err = mesh_path_add(dst, dev);
+ err = mesh_path_add(dst, sdata);
if (err) {
rcu_read_unlock();
return err;
}
- mpath = mesh_path_lookup(dst, dev);
+ mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENXIO;
static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst)
{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (dst)
- return mesh_path_del(dst, dev);
+ return mesh_path_del(dst, sdata);
- mesh_path_flush(dev);
+ mesh_path_flush(sdata);
return 0;
}
return -ENOENT;
}
- mpath = mesh_path_lookup(dst, dev);
+ mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
return -ENOTSUPP;
rcu_read_lock();
- mpath = mesh_path_lookup(dst, dev);
+ mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
return -ENOTSUPP;
rcu_read_lock();
- mpath = mesh_path_lookup_by_idx(idx, dev);
+ mpath = mesh_path_lookup_by_idx(idx, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
tid_num = tid_num - 100;
if (tid_static_rx[tid_num] == 1) {
strcpy(state, "off ");
- ieee80211_sta_stop_rx_ba_session(dev, da, tid_num, 0,
+ ieee80211_sta_stop_rx_ba_session(sta->sdata, da, tid_num, 0,
WLAN_REASON_QSTA_REQUIRE_SETUP);
sta->ampdu_mlme.tid_state_rx[tid_num] |=
HT_AGG_STATE_DEBUGFS_CTL;
* mac80211 - events
*/
-#include <linux/netdevice.h>
#include <net/iw_handler.h>
#include "ieee80211_i.h"
* (in the variable hdr) must be long enough to extract the TKIP
* fields like TSC
*/
-void mac80211_ev_michael_mic_failure(struct net_device *dev, int keyidx,
+void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
struct ieee80211_hdr *hdr)
{
union iwreq_data wrqu;
print_mac(mac, hdr->addr2));
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = strlen(buf);
- wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+ wireless_send_event(sdata->dev, IWEVCUSTOM, &wrqu, buf);
kfree(buf);
}
/* ieee80211.o internal definitions, etc. These are not included into
* low-level drivers. */
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define WLAN_FC_DATA_PRESENT(fc) (((fc) & 0x4c) == 0x08)
-
-#define IEEE80211_FC(type, subtype) cpu_to_le16(type | subtype)
-
struct ieee80211_local;
/* Maximum number of broadcast/multicast frames to buffer when some of the
u64 timestamp;
int beacon_int;
- bool probe_resp;
+ unsigned long last_probe_resp;
unsigned long last_update;
/* during assocation, we save an ERP value from a probe response so
struct sk_buff **extra_frag;
int num_extra_frag;
- u16 fc, ethertype;
+ u16 ethertype;
unsigned int flags;
};
struct ieee80211_rx_status *status;
struct ieee80211_rate *rate;
- u16 fc, ethertype;
+ u16 ethertype;
unsigned int flags;
int sent_ps_buffered;
int queue;
#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
#define IEEE80211_STA_PRIVACY_INVOKED BIT(13)
+/* flags for MLME request*/
+#define IEEE80211_STA_REQ_SCAN 0
+#define IEEE80211_STA_REQ_DIRECT_PROBE 1
+#define IEEE80211_STA_REQ_AUTH 2
+#define IEEE80211_STA_REQ_RUN 3
+
+/* flags used for setting mlme state */
+enum ieee80211_sta_mlme_state {
+ IEEE80211_STA_MLME_DISABLED,
+ IEEE80211_STA_MLME_DIRECT_PROBE,
+ IEEE80211_STA_MLME_AUTHENTICATE,
+ IEEE80211_STA_MLME_ASSOCIATE,
+ IEEE80211_STA_MLME_ASSOCIATED,
+ IEEE80211_STA_MLME_IBSS_SEARCH,
+ IEEE80211_STA_MLME_IBSS_JOINED,
+ IEEE80211_STA_MLME_MESH_UP
+};
+
+/* bitfield of allowed auth algs */
+#define IEEE80211_AUTH_ALG_OPEN BIT(0)
+#define IEEE80211_AUTH_ALG_SHARED_KEY BIT(1)
+#define IEEE80211_AUTH_ALG_LEAP BIT(2)
+
struct ieee80211_if_sta {
struct timer_list timer;
struct work_struct work;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
- enum {
- IEEE80211_DISABLED, IEEE80211_AUTHENTICATE,
- IEEE80211_ASSOCIATE, IEEE80211_ASSOCIATED,
- IEEE80211_IBSS_SEARCH, IEEE80211_IBSS_JOINED,
- IEEE80211_MESH_UP
- } state;
+ enum ieee80211_sta_mlme_state state;
size_t ssid_len;
u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
size_t scan_ssid_len;
struct sk_buff_head skb_queue;
- int auth_tries, assoc_tries;
+ int assoc_scan_tries; /* number of scans done pre-association */
+ int direct_probe_tries; /* retries for direct probes */
+ int auth_tries; /* retries for auth req */
+ int assoc_tries; /* retries for assoc req */
unsigned long request;
unsigned long last_probe;
unsigned int flags;
-#define IEEE80211_STA_REQ_SCAN 0
-#define IEEE80211_STA_REQ_AUTH 1
-#define IEEE80211_STA_REQ_RUN 2
-#define IEEE80211_AUTH_ALG_OPEN BIT(0)
-#define IEEE80211_AUTH_ALG_SHARED_KEY BIT(1)
-#define IEEE80211_AUTH_ALG_LEAP BIT(2)
unsigned int auth_algs; /* bitfield of allowed auth algs */
int auth_alg; /* currently used IEEE 802.11 authentication algorithm */
int auth_transaction;
/* ieee80211_ioctl.c */
extern const struct iw_handler_def ieee80211_iw_handler_def;
-int ieee80211_set_freq(struct net_device *dev, int freq);
+int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
/* ieee80211_sta.c */
void ieee80211_sta_timer(unsigned long data);
void ieee80211_sta_work(struct work_struct *work);
void ieee80211_sta_scan_work(struct work_struct *work);
-void ieee80211_sta_rx_mgmt(struct net_device *dev, struct sk_buff *skb,
+void ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
struct ieee80211_rx_status *rx_status);
-int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len);
-int ieee80211_sta_get_ssid(struct net_device *dev, char *ssid, size_t *len);
-int ieee80211_sta_set_bssid(struct net_device *dev, u8 *bssid);
-int ieee80211_sta_req_scan(struct net_device *dev, u8 *ssid, size_t ssid_len);
-void ieee80211_sta_req_auth(struct net_device *dev,
+int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len);
+int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len);
+int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
+int ieee80211_sta_req_scan(struct ieee80211_sub_if_data *sdata, u8 *ssid, size_t ssid_len);
+void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta);
-int ieee80211_sta_scan_results(struct net_device *dev,
+int ieee80211_sta_scan_results(struct ieee80211_local *local,
struct iw_request_info *info,
char *buf, size_t len);
ieee80211_rx_result ieee80211_sta_rx_scan(
- struct net_device *dev, struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
struct ieee80211_rx_status *rx_status);
void ieee80211_rx_bss_list_init(struct ieee80211_local *local);
void ieee80211_rx_bss_list_deinit(struct ieee80211_local *local);
-int ieee80211_sta_set_extra_ie(struct net_device *dev, char *ie, size_t len);
-struct sta_info *ieee80211_ibss_add_sta(struct net_device *dev,
+int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata, char *ie, size_t len);
+struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u8 *bssid,
u8 *addr, u64 supp_rates);
-int ieee80211_sta_deauthenticate(struct net_device *dev, u16 reason);
-int ieee80211_sta_disassociate(struct net_device *dev, u16 reason);
+int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason);
+int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed);
-u32 ieee80211_reset_erp_info(struct net_device *dev);
+u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_ht_info *ht_info);
int ieee80211_ht_addt_info_ie_to_ht_bss_info(
struct ieee80211_ht_addt_info *ht_add_info_ie,
struct ieee80211_ht_bss_info *bss_info);
-void ieee80211_send_addba_request(struct net_device *dev, const u8 *da,
+void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata, const u8 *da,
u16 tid, u8 dialog_token, u16 start_seq_num,
u16 agg_size, u16 timeout);
-void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid,
+void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid,
u16 initiator, u16 reason_code);
-void ieee80211_send_bar(struct net_device *dev, u8 *ra, u16 tid, u16 ssn);
+void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
-void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *da,
+void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
u16 tid, u16 initiator, u16 reason);
void sta_addba_resp_timer_expired(unsigned long data);
-void ieee80211_sta_tear_down_BA_sessions(struct net_device *dev, u8 *addr);
+void ieee80211_sta_tear_down_BA_sessions(struct ieee80211_sub_if_data *sdata, u8 *addr);
u64 ieee80211_sta_get_rates(struct ieee80211_local *local,
struct ieee802_11_elems *elems,
enum ieee80211_band band);
-void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
+void ieee80211_sta_tx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
int encrypt);
void ieee802_11_parse_elems(u8 *start, size_t len,
struct ieee802_11_elems *elems);
#ifdef CONFIG_MAC80211_MESH
-void ieee80211_start_mesh(struct net_device *dev);
+void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
#else
-static inline void ieee80211_start_mesh(struct net_device *dev)
+static inline void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
{}
#endif
struct vif_params *params);
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum ieee80211_if_types type);
-void ieee80211_if_remove(struct net_device *dev);
+void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
/* tx handling */
enum ieee80211_if_types type);
int ieee80211_frame_duration(struct ieee80211_local *local, size_t len,
int rate, int erp, int short_preamble);
-void mac80211_ev_michael_mic_failure(struct net_device *dev, int keyidx,
+void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
struct ieee80211_hdr *hdr);
#ifdef CONFIG_MAC80211_NOINLINE
case IEEE80211_IF_TYPE_MESH_POINT:
/* Allow compiler to elide mesh_rmc_free call. */
if (ieee80211_vif_is_mesh(&sdata->vif))
- mesh_rmc_free(dev);
+ mesh_rmc_free(sdata);
/* fall through */
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
return ret;
}
-void ieee80211_if_remove(struct net_device *dev)
+void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
ASSERT_RTNL();
list_del_rcu(&sdata->list);
synchronize_rcu();
- unregister_netdevice(dev);
+ unregister_netdevice(sdata->dev);
}
/*
u32 changed = 0;
int res;
bool need_hw_reconfig = 0;
+ u8 null_addr[ETH_ALEN] = {0};
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ /* fail early if user set an invalid address */
+ if (compare_ether_addr(dev->dev_addr, null_addr) &&
+ !is_valid_ether_addr(dev->dev_addr))
+ return -EADDRNOTAVAIL;
+
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
+ /*
+ * Check all interfaces and copy the hopefully now-present
+ * MAC address to those that have the special null one.
+ */
+ list_for_each_entry(nsdata, &local->interfaces, list) {
+ struct net_device *ndev = nsdata->dev;
+
+ /*
+ * No need to check netif_running since we do not allow
+ * it to start up with this invalid address.
+ */
+ if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
+ memcpy(ndev->dev_addr,
+ local->hw.wiphy->perm_addr,
+ ETH_ALEN);
+ }
+
+ if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
+ memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
+ ETH_ALEN);
+
+ /*
+ * Validate the MAC address for this device.
+ */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (!local->open_count && local->ops->stop)
+ local->ops->stop(local_to_hw(local));
+ return -EADDRNOTAVAIL;
+ }
+
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_VLAN:
/* no need to tell driver */
goto err_stop;
if (ieee80211_vif_is_mesh(&sdata->vif))
- ieee80211_start_mesh(sdata->dev);
- changed |= ieee80211_reset_erp_info(dev);
+ ieee80211_start_mesh(sdata);
+ changed |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, changed);
ieee80211_enable_keys(sdata);
list_for_each_entry_rcu(sta, &local->sta_list, list) {
if (sta->sdata == sdata)
- ieee80211_sta_tear_down_BA_sessions(dev, sta->addr);
+ ieee80211_sta_tear_down_BA_sessions(sdata, sta->addr);
}
rcu_read_unlock();
/* fall through */
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
- sdata->u.sta.state = IEEE80211_DISABLED;
+ sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED;
memset(sdata->u.sta.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.sta.timer);
/*
sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
- ieee80211_send_addba_request(sta->sdata->dev, ra, tid,
+ ieee80211_send_addba_request(sta->sdata, ra, tid,
sta->ampdu_mlme.tid_tx[tid]->dialog_token,
sta->ampdu_mlme.tid_tx[tid]->ssn,
0x40, 5000);
}
if (*state & HT_AGG_STATE_INITIATOR_MSK)
- ieee80211_send_delba(sta->sdata->dev, ra, tid,
+ ieee80211_send_delba(sta->sdata, ra, tid,
WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
agg_queue = sta->tid_to_tx_q[tid];
dev->open = ieee80211_open;
dev->stop = ieee80211_stop;
dev->destructor = free_netdev;
+ /* we will validate the address ourselves in ->open */
+ dev->validate_addr = NULL;
}
/* everything else */
changed);
}
-u32 ieee80211_reset_erp_info(struct net_device *dev)
+u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
sdata->bss_conf.use_cts_prot = 0;
sdata->bss_conf.use_short_preamble = 0;
return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE;
struct ieee80211_key *key,
struct sk_buff *skb)
{
- int hdrlen, iv_len, mic_len;
+ unsigned int hdrlen, iv_len, mic_len;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (!key)
goto no_key;
goto no_key;
}
- if (skb->len >= mic_len &&
+ if (skb->len >= hdrlen + mic_len &&
!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
skb_trim(skb, skb->len - mic_len);
- if (skb->len >= iv_len && skb->len > hdrlen) {
+ if (skb->len >= hdrlen + iv_len) {
memmove(skb->data + iv_len, skb->data, hdrlen);
- skb_pull(skb, iv_len);
+ hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
}
no_key:
- {
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 fc = le16_to_cpu(hdr->frame_control);
- if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
- fc &= ~IEEE80211_STYPE_QOS_DATA;
- hdr->frame_control = cpu_to_le16(fc);
- memmove(skb->data + 2, skb->data, hdrlen - 2);
- skb_pull(skb, 2);
- }
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+ memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
+ hdrlen - IEEE80211_QOS_CTL_LEN);
+ skb_pull(skb, IEEE80211_QOS_CTL_LEN);
}
}
tid = qc[0] & 0xf;
ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
& IEEE80211_SCTL_SEQ);
- ieee80211_send_bar(sta->sdata->dev, hdr->addr1,
+ ieee80211_send_bar(sta->sdata, hdr->addr1,
tid, ssn);
}
}
* mesh_matches_local - check if the config of a mesh point matches ours
*
* @ie: information elements of a management frame from the mesh peer
- * @dev: local mesh interface
+ * @sdata: local mesh subif
*
* This function checks if the mesh configuration of a mesh point matches the
* local mesh configuration, i.e. if both nodes belong to the same mesh network.
*/
-bool mesh_matches_local(struct ieee802_11_elems *ie, struct net_device *dev)
+bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *sta = &sdata->u.sta;
/*
* mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
*
* @ie: information elements of a management frame from the mesh peer
- * @dev: local mesh interface
*/
-bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie,
- struct net_device *dev)
+bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{
return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0;
}
memcpy(sta->mesh_cc_id, def_id, 4);
}
-int mesh_rmc_init(struct net_device *dev)
+int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int i;
sdata->u.sta.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
return 0;
}
-void mesh_rmc_free(struct net_device *dev)
+void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct mesh_rmc *rmc = sdata->u.sta.rmc;
struct rmc_entry *p, *n;
int i;
* it.
*/
int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
- struct net_device *dev)
+ struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct mesh_rmc *rmc = sdata->u.sta.rmc;
u32 seqnum = 0;
int entries = 0;
return 0;
}
-void mesh_mgmt_ies_add(struct sk_buff *skb, struct net_device *dev)
+void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
u8 *pos;
int len, i, rate;
return;
}
-u32 mesh_table_hash(u8 *addr, struct net_device *dev, struct mesh_table *tbl)
+u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
{
/* Use last four bytes of hw addr and interface index as hash index */
- return jhash_2words(*(u32 *)(addr+2), dev->ifindex, tbl->hash_rnd)
+ return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
& tbl->hash_mask;
}
ifsta->preq_id = 0;
ifsta->dsn = 0;
atomic_set(&ifsta->mpaths, 0);
- mesh_rmc_init(sdata->dev);
+ mesh_rmc_init(sdata);
ifsta->last_preq = jiffies;
/* Allocate all mesh structures when creating the first mesh interface. */
if (!mesh_allocated)
* struct mesh_path - mac80211 mesh path structure
*
* @dst: mesh path destination mac address
- * @dev: mesh path device
+ * @sdata: mesh subif
* @next_hop: mesh neighbor to which frames for this destination will be
* forwarded
* @timer: mesh path discovery timer
* @state_lock: mesh pat state lock
*
*
- * The combination of dst and dev is unique in the mesh path table. Since the
+ * The combination of dst and sdata is unique in the mesh path table. Since the
* next_hop STA is only protected by RCU as well, deleting the STA must also
* remove/substitute the mesh_path structure and wait until that is no longer
* reachable before destroying the STA completely.
*/
struct mesh_path {
u8 dst[ETH_ALEN];
- struct net_device *dev;
+ struct ieee80211_sub_if_data *sdata;
struct sta_info *next_hop;
struct timer_list timer;
struct sk_buff_head frame_queue;
int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
struct ieee80211_sub_if_data *sdata);
int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
- struct net_device *dev);
-bool mesh_matches_local(struct ieee802_11_elems *ie, struct net_device *dev);
+ struct ieee80211_sub_if_data *sdata);
+bool mesh_matches_local(struct ieee802_11_elems *ie,
+ struct ieee80211_sub_if_data *sdata);
void mesh_ids_set_default(struct ieee80211_if_sta *sta);
-void mesh_mgmt_ies_add(struct sk_buff *skb, struct net_device *dev);
-void mesh_rmc_free(struct net_device *dev);
-int mesh_rmc_init(struct net_device *dev);
+void mesh_mgmt_ies_add(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
+int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
void ieee80211s_init(void);
void ieee80211s_stop(void);
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
/* Mesh paths */
-int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev);
-void mesh_path_start_discovery(struct net_device *dev);
-struct mesh_path *mesh_path_lookup(u8 *dst, struct net_device *dev);
-struct mesh_path *mesh_path_lookup_by_idx(int idx, struct net_device *dev);
+int mesh_nexthop_lookup(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata);
+struct mesh_path *mesh_path_lookup(u8 *dst,
+ struct ieee80211_sub_if_data *sdata);
+struct mesh_path *mesh_path_lookup_by_idx(int idx,
+ struct ieee80211_sub_if_data *sdata);
void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop);
-void mesh_path_expire(struct net_device *dev);
-void mesh_path_flush(struct net_device *dev);
-void mesh_rx_path_sel_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
- size_t len);
-int mesh_path_add(u8 *dst, struct net_device *dev);
+void mesh_path_expire(struct ieee80211_sub_if_data *sdata);
+void mesh_path_flush(struct ieee80211_sub_if_data *sdata);
+void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt, size_t len);
+int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata);
/* Mesh plinks */
-void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev,
- bool add);
-bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie,
- struct net_device *dev);
+void mesh_neighbour_update(u8 *hw_addr, u64 rates,
+ struct ieee80211_sub_if_data *sdata, bool add);
+bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
void mesh_plink_broken(struct sta_info *sta);
void mesh_plink_deactivate(struct sta_info *sta);
int mesh_plink_open(struct sta_info *sta);
int mesh_plink_close(struct sta_info *sta);
void mesh_plink_block(struct sta_info *sta);
-void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
- size_t len, struct ieee80211_rx_status *rx_status);
+void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ struct ieee80211_rx_status *rx_status);
/* Private interfaces */
/* Mesh tables */
struct mesh_table *mesh_table_alloc(int size_order);
void mesh_table_free(struct mesh_table *tbl, bool free_leafs);
struct mesh_table *mesh_table_grow(struct mesh_table *tbl);
-u32 mesh_table_hash(u8 *addr, struct net_device *dev, struct mesh_table *tbl);
+u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
+ struct mesh_table *tbl);
/* Mesh paths */
int mesh_path_error_tx(u8 *dest, __le32 dest_dsn, u8 *ra,
- struct net_device *dev);
+ struct ieee80211_sub_if_data *sdata);
void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta);
void mesh_path_flush_pending(struct mesh_path *mpath);
void mesh_path_tx_pending(struct mesh_path *mpath);
int mesh_pathtbl_init(void);
void mesh_pathtbl_unregister(void);
-int mesh_path_del(u8 *addr, struct net_device *dev);
+int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata);
void mesh_path_timer(unsigned long data);
void mesh_path_flush_by_nexthop(struct sta_info *sta);
-void mesh_path_discard_frame(struct sk_buff *skb, struct net_device *dev);
+void mesh_path_discard_frame(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
#ifdef CONFIG_MAC80211_MESH
extern int mesh_allocated;
static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
u8 *orig_addr, __le32 orig_dsn, u8 dst_flags, u8 *dst,
__le32 dst_dsn, u8 *da, u8 hop_count, u8 ttl, __le32 lifetime,
- __le32 metric, __le32 preq_id, struct net_device *dev)
+ __le32 metric, __le32 preq_id, struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
struct ieee80211_mgmt *mgmt;
u8 *pos;
mgmt = (struct ieee80211_mgmt *)
skb_put(skb, 25 + sizeof(mgmt->u.action.u.mesh_action));
memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.mesh_action));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
mgmt->u.action.u.mesh_action.action_code = action;
pos += ETH_ALEN;
memcpy(pos, &dst_dsn, 4);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
return 0;
}
* @ra: node this frame is addressed to
*/
int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra,
- struct net_device *dev)
+ struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
struct ieee80211_mgmt *mgmt;
u8 *pos;
mgmt = (struct ieee80211_mgmt *)
skb_put(skb, 25 + sizeof(mgmt->u.action.u.mesh_action));
memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.mesh_action));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
memcpy(mgmt->da, ra, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
mgmt->u.action.u.mesh_action.action_code = MPATH_PERR;
pos += ETH_ALEN;
memcpy(pos, &dst_dsn, 4);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
return 0;
}
/**
* hwmp_route_info_get - Update routing info to originator and transmitter
*
- * @dev: local mesh interface
+ * @sdata: local mesh subif
* @mgmt: mesh management frame
* @hwmp_ie: hwmp information element (PREP or PREQ)
*
* Notes: this function is the only place (besides user-provided info) where
* path routing information is updated.
*/
-static u32 hwmp_route_info_get(struct net_device *dev,
+static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
u8 *hwmp_ie)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct mesh_path *mpath;
struct sta_info *sta;
bool fresh_info;
new_metric = MAX_METRIC;
exp_time = TU_TO_EXP_TIME(orig_lifetime);
- if (memcmp(orig_addr, dev->dev_addr, ETH_ALEN) == 0) {
+ if (memcmp(orig_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
/* This MP is the originator, we are not interested in this
* frame, except for updating transmitter's path info.
*/
process = false;
fresh_info = false;
} else {
- mpath = mesh_path_lookup(orig_addr, dev);
+ mpath = mesh_path_lookup(orig_addr, sdata);
if (mpath) {
spin_lock_bh(&mpath->state_lock);
if (mpath->flags & MESH_PATH_FIXED)
}
}
} else {
- mesh_path_add(orig_addr, dev);
- mpath = mesh_path_lookup(orig_addr, dev);
+ mesh_path_add(orig_addr, sdata);
+ mpath = mesh_path_lookup(orig_addr, sdata);
if (!mpath) {
rcu_read_unlock();
return 0;
else {
fresh_info = true;
- mpath = mesh_path_lookup(ta, dev);
+ mpath = mesh_path_lookup(ta, sdata);
if (mpath) {
spin_lock_bh(&mpath->state_lock);
if ((mpath->flags & MESH_PATH_FIXED) ||
(last_hop_metric > mpath->metric)))
fresh_info = false;
} else {
- mesh_path_add(ta, dev);
- mpath = mesh_path_lookup(ta, dev);
+ mesh_path_add(ta, sdata);
+ mpath = mesh_path_lookup(ta, sdata);
if (!mpath) {
rcu_read_unlock();
return 0;
return process ? new_metric : 0;
}
-static void hwmp_preq_frame_process(struct net_device *dev,
+static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
u8 *preq_elem, u32 metric) {
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
struct mesh_path *mpath;
u8 *dst_addr, *orig_addr;
orig_dsn = PREQ_IE_ORIG_DSN(preq_elem);
dst_flags = PREQ_IE_DST_F(preq_elem);
- if (memcmp(dst_addr, dev->dev_addr, ETH_ALEN) == 0) {
+ if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
forward = false;
reply = true;
metric = 0;
}
} else {
rcu_read_lock();
- mpath = mesh_path_lookup(dst_addr, dev);
+ mpath = mesh_path_lookup(dst_addr, sdata);
if (mpath) {
if ((!(mpath->flags & MESH_PATH_DSN_VALID)) ||
DSN_LT(mpath->dsn, dst_dsn)) {
cpu_to_le32(dst_dsn), 0, orig_addr,
cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl,
cpu_to_le32(lifetime), cpu_to_le32(metric),
- 0, dev);
+ 0, sdata);
else
ifsta->mshstats.dropped_frames_ttl++;
}
hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1;
mesh_path_sel_frame_tx(MPATH_PREQ, flags, orig_addr,
cpu_to_le32(orig_dsn), dst_flags, dst_addr,
- cpu_to_le32(dst_dsn), dev->broadcast,
+ cpu_to_le32(dst_dsn), sdata->dev->broadcast,
hopcount, ttl, cpu_to_le32(lifetime),
cpu_to_le32(metric), cpu_to_le32(preq_id),
- dev);
+ sdata);
ifsta->mshstats.fwded_frames++;
}
}
-static void hwmp_prep_frame_process(struct net_device *dev,
+static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
u8 *prep_elem, u32 metric)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct mesh_path *mpath;
u8 *dst_addr, *orig_addr;
u8 ttl, hopcount, flags;
* replies
*/
dst_addr = PREP_IE_DST_ADDR(prep_elem);
- if (memcmp(dst_addr, dev->dev_addr, ETH_ALEN) == 0)
+ if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* destination, no forwarding required */
return;
}
rcu_read_lock();
- mpath = mesh_path_lookup(dst_addr, dev);
+ mpath = mesh_path_lookup(dst_addr, sdata);
if (mpath)
spin_lock_bh(&mpath->state_lock);
else
cpu_to_le32(orig_dsn), 0, dst_addr,
cpu_to_le32(dst_dsn), mpath->next_hop->addr, hopcount, ttl,
cpu_to_le32(lifetime), cpu_to_le32(metric),
- 0, dev);
+ 0, sdata);
rcu_read_unlock();
sdata->u.sta.mshstats.fwded_frames++;
return;
return;
}
-static void hwmp_perr_frame_process(struct net_device *dev,
+static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, u8 *perr_elem)
{
struct mesh_path *mpath;
dst_addr = PERR_IE_DST_ADDR(perr_elem);
dst_dsn = PERR_IE_DST_DSN(perr_elem);
rcu_read_lock();
- mpath = mesh_path_lookup(dst_addr, dev);
+ mpath = mesh_path_lookup(dst_addr, sdata);
if (mpath) {
spin_lock_bh(&mpath->state_lock);
if (mpath->flags & MESH_PATH_ACTIVE &&
mpath->dsn = dst_dsn;
spin_unlock_bh(&mpath->state_lock);
mesh_path_error_tx(dst_addr, cpu_to_le32(dst_dsn),
- dev->broadcast, dev);
+ sdata->dev->broadcast, sdata);
} else
spin_unlock_bh(&mpath->state_lock);
}
-void mesh_rx_path_sel_frame(struct net_device *dev,
+void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len)
{
if (!elems.preq || elems.preq_len != 37)
/* Right now we support just 1 destination and no AE */
return;
- last_hop_metric = hwmp_route_info_get(dev, mgmt, elems.preq);
+ last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq);
if (!last_hop_metric)
return;
- hwmp_preq_frame_process(dev, mgmt, elems.preq, last_hop_metric);
+ hwmp_preq_frame_process(sdata, mgmt, elems.preq, last_hop_metric);
break;
case MPATH_PREP:
if (!elems.prep || elems.prep_len != 31)
/* Right now we support no AE */
return;
- last_hop_metric = hwmp_route_info_get(dev, mgmt, elems.prep);
+ last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep);
if (!last_hop_metric)
return;
- hwmp_prep_frame_process(dev, mgmt, elems.prep, last_hop_metric);
+ hwmp_prep_frame_process(sdata, mgmt, elems.prep, last_hop_metric);
break;
case MPATH_PERR:
if (!elems.perr || elems.perr_len != 12)
/* Right now we support only one destination per PERR */
return;
- hwmp_perr_frame_process(dev, mgmt, elems.perr);
+ hwmp_perr_frame_process(sdata, mgmt, elems.perr);
default:
return;
}
*/
static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
{
- struct ieee80211_sub_if_data *sdata =
- IEEE80211_DEV_TO_SUB_IF(mpath->dev);
+ struct ieee80211_sub_if_data *sdata = mpath->sdata;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
struct mesh_preq_queue *preq_node;
/**
* mesh_path_start_discovery - launch a path discovery from the PREQ queue
*
- * @dev: local mesh interface
+ * @sdata: local mesh subif
*/
-void mesh_path_start_discovery(struct net_device *dev)
+void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata =
- IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
struct mesh_preq_queue *preq_node;
struct mesh_path *mpath;
spin_unlock(&ifsta->mesh_preq_queue_lock);
rcu_read_lock();
- mpath = mesh_path_lookup(preq_node->dst, dev);
+ mpath = mesh_path_lookup(preq_node->dst, sdata);
if (!mpath)
goto enddiscovery;
dst_flags = MP_F_RF;
spin_unlock_bh(&mpath->state_lock);
- mesh_path_sel_frame_tx(MPATH_PREQ, 0, dev->dev_addr,
+ mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->dev->dev_addr,
cpu_to_le32(ifsta->dsn), dst_flags, mpath->dst,
- cpu_to_le32(mpath->dsn), dev->broadcast, 0,
+ cpu_to_le32(mpath->dsn), sdata->dev->broadcast, 0,
ttl, cpu_to_le32(lifetime), 0,
- cpu_to_le32(ifsta->preq_id++), dev);
+ cpu_to_le32(ifsta->preq_id++), sdata);
mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);
enddiscovery:
* ieee80211s_lookup_nexthop - put the appropriate next hop on a mesh frame
*
* @skb: 802.11 frame to be sent
- * @dev: network device the frame will be sent through
+ * @sdata: network subif the frame will be sent through
* @fwd_frame: true if this frame was originally from a different host
*
* Returns: 0 if the next hop was found. Nonzero otherwise. If no next hop is
* sent when the path is resolved. This means the caller must not free the skb
* in this case.
*/
-int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev)
+int mesh_nexthop_lookup(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sk_buff *skb_to_free = NULL;
struct mesh_path *mpath;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
int err = 0;
rcu_read_lock();
- mpath = mesh_path_lookup(dst_addr, dev);
+ mpath = mesh_path_lookup(dst_addr, sdata);
if (!mpath) {
- mesh_path_add(dst_addr, dev);
- mpath = mesh_path_lookup(dst_addr, dev);
+ mesh_path_add(dst_addr, sdata);
+ mpath = mesh_path_lookup(dst_addr, sdata);
if (!mpath) {
dev_kfree_skb(skb);
sdata->u.sta.mshstats.dropped_frames_no_route++;
if (mpath->flags & MESH_PATH_ACTIVE) {
if (time_after(jiffies, mpath->exp_time -
msecs_to_jiffies(sdata->u.sta.mshcfg.path_refresh_time))
- && !memcmp(dev->dev_addr, hdr->addr4, ETH_ALEN)
+ && !memcmp(sdata->dev->dev_addr, hdr->addr4,
+ ETH_ALEN)
&& !(mpath->flags & MESH_PATH_RESOLVING)
&& !(mpath->flags & MESH_PATH_FIXED)) {
mesh_queue_preq(mpath,
skb_queue_tail(&mpath->frame_queue, skb);
if (skb_to_free)
- mesh_path_discard_frame(skb_to_free, dev);
+ mesh_path_discard_frame(skb_to_free, sdata);
err = -ENOENT;
}
if (!mpath)
goto endmpathtimer;
spin_lock_bh(&mpath->state_lock);
- sdata = IEEE80211_DEV_TO_SUB_IF(mpath->dev);
+ sdata = mpath->sdata;
if (mpath->flags & MESH_PATH_RESOLVED ||
(!(mpath->flags & MESH_PATH_RESOLVING)))
mpath->flags &= ~(MESH_PATH_RESOLVING | MESH_PATH_RESOLVED);
#include <linux/etherdevice.h>
#include <linux/list.h>
-#include <linux/netdevice.h>
#include <linux/random.h>
#include <linux/spinlock.h>
#include <linux/string.h>
/**
* mesh_path_lookup - look up a path in the mesh path table
* @dst: hardware address (ETH_ALEN length) of destination
- * @dev: local interface
+ * @sdata: local subif
*
* Returns: pointer to the mesh path structure, or NULL if not found
*
* Locking: must be called within a read rcu section.
*/
-struct mesh_path *mesh_path_lookup(u8 *dst, struct net_device *dev)
+struct mesh_path *mesh_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata)
{
struct mesh_path *mpath;
struct hlist_node *n;
tbl = rcu_dereference(mesh_paths);
- bucket = &tbl->hash_buckets[mesh_table_hash(dst, dev, tbl)];
+ bucket = &tbl->hash_buckets[mesh_table_hash(dst, sdata, tbl)];
hlist_for_each_entry_rcu(node, n, bucket, list) {
mpath = node->mpath;
- if (mpath->dev == dev &&
+ if (mpath->sdata == sdata &&
memcmp(dst, mpath->dst, ETH_ALEN) == 0) {
if (MPATH_EXPIRED(mpath)) {
spin_lock_bh(&mpath->state_lock);
/**
* mesh_path_lookup_by_idx - look up a path in the mesh path table by its index
* @idx: index
- * @dev: local interface, or NULL for all entries
+ * @sdata: local subif, or NULL for all entries
*
* Returns: pointer to the mesh path structure, or NULL if not found.
*
* Locking: must be called within a read rcu section.
*/
-struct mesh_path *mesh_path_lookup_by_idx(int idx, struct net_device *dev)
+struct mesh_path *mesh_path_lookup_by_idx(int idx, struct ieee80211_sub_if_data *sdata)
{
struct mpath_node *node;
struct hlist_node *p;
int j = 0;
for_each_mesh_entry(mesh_paths, p, node, i) {
- if (dev && node->mpath->dev != dev)
+ if (sdata && node->mpath->sdata != sdata)
continue;
if (j++ == idx) {
if (MPATH_EXPIRED(node->mpath)) {
/**
* mesh_path_add - allocate and add a new path to the mesh path table
* @addr: destination address of the path (ETH_ALEN length)
- * @dev: local interface
+ * @sdata: local subif
*
* Returns: 0 on sucess
*
* State: the initial state of the new path is set to 0
*/
-int mesh_path_add(u8 *dst, struct net_device *dev)
+int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct mesh_path *mpath, *new_mpath;
struct mpath_node *node, *new_node;
struct hlist_head *bucket;
int err = 0;
u32 hash_idx;
- if (memcmp(dst, dev->dev_addr, ETH_ALEN) == 0)
+ if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
return -ENOTSUPP;
read_lock(&pathtbl_resize_lock);
memcpy(new_mpath->dst, dst, ETH_ALEN);
- new_mpath->dev = dev;
+ new_mpath->sdata = sdata;
new_mpath->flags = 0;
skb_queue_head_init(&new_mpath->frame_queue);
new_node->mpath = new_mpath;
spin_lock_init(&new_mpath->state_lock);
init_timer(&new_mpath->timer);
- hash_idx = mesh_table_hash(dst, dev, mesh_paths);
+ hash_idx = mesh_table_hash(dst, sdata, mesh_paths);
bucket = &mesh_paths->hash_buckets[hash_idx];
spin_lock(&mesh_paths->hashwlock[hash_idx]);
err = -EEXIST;
hlist_for_each_entry(node, n, bucket, list) {
mpath = node->mpath;
- if (mpath->dev == dev && memcmp(dst, mpath->dst, ETH_ALEN) == 0)
+ if (mpath->sdata == sdata && memcmp(dst, mpath->dst, ETH_ALEN) == 0)
goto err_exists;
}
struct mesh_path *mpath;
struct mpath_node *node;
struct hlist_node *p;
- struct net_device *dev = sta->sdata->dev;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
int i;
rcu_read_lock();
spin_unlock_bh(&mpath->state_lock);
mesh_path_error_tx(mpath->dst,
cpu_to_le32(mpath->dsn),
- dev->broadcast, dev);
+ sdata->dev->broadcast, sdata);
} else
spin_unlock_bh(&mpath->state_lock);
}
for_each_mesh_entry(mesh_paths, p, node, i) {
mpath = node->mpath;
if (mpath->next_hop == sta)
- mesh_path_del(mpath->dst, mpath->dev);
+ mesh_path_del(mpath->dst, mpath->sdata);
}
}
-void mesh_path_flush(struct net_device *dev)
+void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
{
struct mesh_path *mpath;
struct mpath_node *node;
for_each_mesh_entry(mesh_paths, p, node, i) {
mpath = node->mpath;
- if (mpath->dev == dev)
- mesh_path_del(mpath->dst, mpath->dev);
+ if (mpath->sdata == sdata)
+ mesh_path_del(mpath->dst, mpath->sdata);
}
}
static void mesh_path_node_reclaim(struct rcu_head *rp)
{
struct mpath_node *node = container_of(rp, struct mpath_node, rcu);
- struct ieee80211_sub_if_data *sdata =
- IEEE80211_DEV_TO_SUB_IF(node->mpath->dev);
+ struct ieee80211_sub_if_data *sdata = node->mpath->sdata;
del_timer_sync(&node->mpath->timer);
atomic_dec(&sdata->u.sta.mpaths);
* mesh_path_del - delete a mesh path from the table
*
* @addr: dst address (ETH_ALEN length)
- * @dev: local interface
+ * @sdata: local subif
*
* Returns: 0 if succesful
*/
-int mesh_path_del(u8 *addr, struct net_device *dev)
+int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata)
{
struct mesh_path *mpath;
struct mpath_node *node;
int err = 0;
read_lock(&pathtbl_resize_lock);
- hash_idx = mesh_table_hash(addr, dev, mesh_paths);
+ hash_idx = mesh_table_hash(addr, sdata, mesh_paths);
bucket = &mesh_paths->hash_buckets[hash_idx];
spin_lock(&mesh_paths->hashwlock[hash_idx]);
hlist_for_each_entry(node, n, bucket, list) {
mpath = node->mpath;
- if (mpath->dev == dev &&
+ if (mpath->sdata == sdata &&
memcmp(addr, mpath->dst, ETH_ALEN) == 0) {
spin_lock_bh(&mpath->state_lock);
mpath->flags |= MESH_PATH_RESOLVING;
* mesh_path_discard_frame - discard a frame whose path could not be resolved
*
* @skb: frame to discard
- * @dev: network device the frame was to be sent through
+ * @sdata: network subif the frame was to be sent through
*
* If the frame was beign forwarded from another MP, a PERR frame will be sent
* to the precursor.
*
* Locking: the function must me called within a rcu_read_lock region
*/
-void mesh_path_discard_frame(struct sk_buff *skb, struct net_device *dev)
+void mesh_path_discard_frame(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct mesh_path *mpath;
u32 dsn = 0;
- if (memcmp(hdr->addr4, dev->dev_addr, ETH_ALEN) != 0) {
+ if (memcmp(hdr->addr4, sdata->dev->dev_addr, ETH_ALEN) != 0) {
u8 *ra, *da;
da = hdr->addr3;
ra = hdr->addr2;
- mpath = mesh_path_lookup(da, dev);
+ mpath = mesh_path_lookup(da, sdata);
if (mpath)
dsn = ++mpath->dsn;
- mesh_path_error_tx(skb->data, cpu_to_le32(dsn), ra, dev);
+ mesh_path_error_tx(skb->data, cpu_to_le32(dsn), ra, sdata);
}
kfree_skb(skb);
*/
void mesh_path_flush_pending(struct mesh_path *mpath)
{
- struct ieee80211_sub_if_data *sdata;
struct sk_buff *skb;
- sdata = IEEE80211_DEV_TO_SUB_IF(mpath->dev);
-
while ((skb = skb_dequeue(&mpath->frame_queue)) &&
(mpath->flags & MESH_PATH_ACTIVE))
- mesh_path_discard_frame(skb, mpath->dev);
+ mesh_path_discard_frame(skb, mpath->sdata);
}
/**
node = hlist_entry(p, struct mpath_node, list);
mpath = node->mpath;
new_node->mpath = mpath;
- hash_idx = mesh_table_hash(mpath->dst, mpath->dev, newtbl);
+ hash_idx = mesh_table_hash(mpath->dst, mpath->sdata, newtbl);
hlist_add_head(&new_node->list,
&newtbl->hash_buckets[hash_idx]);
return 0;
return 0;
}
-void mesh_path_expire(struct net_device *dev)
+void mesh_path_expire(struct ieee80211_sub_if_data *sdata)
{
struct mesh_path *mpath;
struct mpath_node *node;
read_lock(&pathtbl_resize_lock);
for_each_mesh_entry(mesh_paths, p, node, i) {
- if (node->mpath->dev != dev)
+ if (node->mpath->sdata != sdata)
continue;
mpath = node->mpath;
spin_lock_bh(&mpath->state_lock);
time_after(jiffies,
mpath->exp_time + MESH_PATH_EXPIRE)) {
spin_unlock_bh(&mpath->state_lock);
- mesh_path_del(mpath->dst, mpath->dev);
+ mesh_path_del(mpath->dst, mpath->sdata);
} else
spin_unlock_bh(&mpath->state_lock);
}
spin_unlock_bh(&sta->lock);
}
-static int mesh_plink_frame_tx(struct net_device *dev,
+static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
__le16 reason) {
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
struct ieee80211_mgmt *mgmt;
bool include_plid = false;
mgmt = (struct ieee80211_mgmt *)
skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action));
memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.action.category = PLINK_CATEGORY;
mgmt->u.action.u.plink_action.action_code = action;
/* two-byte status code followed by two-byte AID */
memset(pos, 0, 4);
}
- mesh_mgmt_ies_add(skb, dev);
+ mesh_mgmt_ies_add(skb, sdata);
}
/* Add Peer Link Management element */
memcpy(pos, &reason, 2);
}
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
return 0;
}
-void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev,
+void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct ieee80211_sub_if_data *sdata,
bool peer_accepting_plinks)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
rcu_read_lock();
{
struct sta_info *sta;
__le16 llid, plid, reason;
- struct net_device *dev = NULL;
struct ieee80211_sub_if_data *sdata;
#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
DECLARE_MAC_BUF(mac);
llid = sta->llid;
plid = sta->plid;
sdata = sta->sdata;
- dev = sdata->dev;
switch (sta->plink_state) {
case PLINK_OPN_RCVD:
++sta->plink_retries;
mod_plink_timer(sta, sta->plink_timeout);
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
0, 0);
break;
}
sta->plink_state = PLINK_HOLDING;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, plid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid, plid,
reason);
break;
case PLINK_HOLDING:
mpl_dbg("Mesh plink: starting establishment with %s\n",
print_mac(mac, sta->addr));
- return mesh_plink_frame_tx(sdata->dev, PLINK_OPEN,
+ return mesh_plink_frame_tx(sdata, PLINK_OPEN,
sta->addr, llid, 0, 0);
}
llid = sta->llid;
plid = sta->plid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sta->sdata->dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sta->sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
return 0;
}
-void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
+void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt,
size_t len, struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee802_11_elems elems;
struct sta_info *sta;
/* Now we will figure out the appropriate event... */
event = PLINK_UNDEFINED;
- if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, dev))) {
+ if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, sdata))) {
switch (ftype) {
case PLINK_OPEN:
event = OPN_RJCT;
sta->llid = llid;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
0, 0);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr,
llid, plid, 0);
break;
default:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
break;
case OPN_ACPT:
sta->plid = plid;
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
plid, 0);
break;
case CNF_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
plid, 0);
break;
case CNF_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
break;
case OPN_ACPT:
spin_unlock_bh(&sta->lock);
mpl_dbg("Mesh plink with %s ESTABLISHED\n",
print_mac(mac, sta->addr));
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
plid, 0);
break;
default:
llid = sta->llid;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
plid, 0);
break;
default:
llid = sta->llid;
reason = sta->reason;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
plid, reason);
break;
default:
#include "led.h"
#include "mesh.h"
+#define IEEE80211_ASSOC_SCANS_MAX_TRIES 2
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
#define IEEE80211_MIN_AMPDU_BUF 0x8
#define IEEE80211_MAX_AMPDU_BUF 0x40
-static void ieee80211_send_probe_req(struct net_device *dev, u8 *dst,
+static void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
u8 *ssid, size_t ssid_len);
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid, int freq,
+ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len);
static void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_sta_bss *bss);
-static int ieee80211_sta_find_ibss(struct net_device *dev,
+static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta);
-static int ieee80211_sta_wep_configured(struct net_device *dev);
-static int ieee80211_sta_start_scan(struct net_device *dev,
+static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata);
+static int ieee80211_sta_start_scan(struct ieee80211_sub_if_data *sdata,
u8 *ssid, size_t ssid_len);
-static int ieee80211_sta_config_auth(struct net_device *dev,
+static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta);
static void sta_rx_agg_session_timer_expired(unsigned long data);
}
-static void ieee80211_sta_def_wmm_params(struct net_device *dev,
+static void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta_bss *bss,
int ibss)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int i, have_higher_than_11mbit = 0;
}
}
-static void ieee80211_sta_wmm_params(struct net_device *dev,
+static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
struct ieee80211_if_sta *ifsta,
u8 *wmm_param, size_t wmm_param_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_queue_params params;
size_t left;
int count;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
"cWmin=%d cWmax=%d txop=%d\n",
- dev->name, queue, aci, acm, params.aifs, params.cw_min,
+ local->mdev->name, queue, aci, acm, params.aifs, params.cw_min,
params.cw_max, params.txop);
#endif
/* TODO: handle ACM (block TX, fallback to next lowest allowed
* AC for now) */
if (local->ops->conf_tx(local_to_hw(local), queue, ¶ms)) {
printk(KERN_DEBUG "%s: failed to set TX queue "
- "parameters for queue %d\n", dev->name, queue);
+ "parameters for queue %d\n", local->mdev->name, queue);
}
}
}
return 0;
}
-static void ieee80211_sta_send_associnfo(struct net_device *dev,
+static void ieee80211_sta_send_associnfo(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
char *buf;
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = len;
- wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+ wireless_send_event(sdata->dev, IWEVCUSTOM, &wrqu, buf);
kfree(buf);
}
-static void ieee80211_set_associated(struct net_device *dev,
+static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
bool assoc)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_conf *conf = &local_to_hw(local)->conf;
union iwreq_data wrqu;
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return;
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ bss = ieee80211_rx_bss_get(local, ifsta->bssid,
conf->channel->center_freq,
ifsta->ssid, ifsta->ssid_len);
if (bss) {
ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN);
memcpy(wrqu.ap_addr.sa_data, sdata->u.sta.bssid, ETH_ALEN);
- ieee80211_sta_send_associnfo(dev, ifsta);
+ ieee80211_sta_send_associnfo(sdata, ifsta);
} else {
- netif_carrier_off(dev);
- ieee80211_sta_tear_down_BA_sessions(dev, ifsta->bssid);
+ netif_carrier_off(sdata->dev);
+ ieee80211_sta_tear_down_BA_sessions(sdata, ifsta->bssid);
ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
- changed |= ieee80211_reset_erp_info(dev);
+ changed |= ieee80211_reset_erp_info(sdata);
sdata->bss_conf.assoc_ht = 0;
sdata->bss_conf.ht_conf = NULL;
ieee80211_bss_info_change_notify(sdata, changed);
if (assoc)
- netif_carrier_on(dev);
+ netif_carrier_on(sdata->dev);
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
}
-static void ieee80211_set_disassoc(struct net_device *dev,
+static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta, int deauth)
{
- if (deauth)
+ if (deauth) {
+ ifsta->direct_probe_tries = 0;
ifsta->auth_tries = 0;
+ }
+ ifsta->assoc_scan_tries = 0;
ifsta->assoc_tries = 0;
- ieee80211_set_associated(dev, ifsta, 0);
+ ieee80211_set_associated(sdata, ifsta, 0);
}
-void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
+void ieee80211_sta_tx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
int encrypt)
{
- struct ieee80211_sub_if_data *sdata;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
skb->dev = sdata->local->mdev;
skb_set_mac_header(skb, 0);
skb_set_network_header(skb, 0);
}
-static void ieee80211_send_auth(struct net_device *dev,
+static void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
int transaction, u8 *extra, size_t extra_len,
int encrypt)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
sizeof(*mgmt) + 6 + extra_len);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for auth "
- "frame\n", dev->name);
+ "frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
memset(mgmt, 0, 24 + 6);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_AUTH);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_AUTH);
if (encrypt)
mgmt->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
memcpy(mgmt->da, ifsta->bssid, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
mgmt->u.auth.auth_alg = cpu_to_le16(ifsta->auth_alg);
mgmt->u.auth.auth_transaction = cpu_to_le16(transaction);
if (extra)
memcpy(skb_put(skb, extra_len), extra, extra_len);
- ieee80211_sta_tx(dev, skb, encrypt);
+ ieee80211_sta_tx(sdata, skb, encrypt);
+}
+
+static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_if_sta *ifsta)
+{
+ DECLARE_MAC_BUF(mac);
+
+ ifsta->direct_probe_tries++;
+ if (ifsta->direct_probe_tries > IEEE80211_AUTH_MAX_TRIES) {
+ printk(KERN_DEBUG "%s: direct probe to AP %s timed out\n",
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
+ return;
+ }
+
+ printk(KERN_DEBUG "%s: direct probe to AP %s try %d\n",
+ sdata->dev->name, print_mac(mac, ifsta->bssid),
+ ifsta->direct_probe_tries);
+
+ ifsta->state = IEEE80211_STA_MLME_DIRECT_PROBE;
+
+ set_bit(IEEE80211_STA_REQ_DIRECT_PROBE, &ifsta->request);
+
+ /* Direct probe is sent to broadcast address as some APs
+ * will not answer to direct packet in unassociated state.
+ */
+ ieee80211_send_probe_req(sdata, NULL,
+ ifsta->ssid, ifsta->ssid_len);
+
+ mod_timer(&ifsta->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
}
-static void ieee80211_authenticate(struct net_device *dev,
+static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
DECLARE_MAC_BUF(mac);
if (ifsta->auth_tries > IEEE80211_AUTH_MAX_TRIES) {
printk(KERN_DEBUG "%s: authentication with AP %s"
" timed out\n",
- dev->name, print_mac(mac, ifsta->bssid));
- ifsta->state = IEEE80211_DISABLED;
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
return;
}
- ifsta->state = IEEE80211_AUTHENTICATE;
+ ifsta->state = IEEE80211_STA_MLME_AUTHENTICATE;
printk(KERN_DEBUG "%s: authenticate with AP %s\n",
- dev->name, print_mac(mac, ifsta->bssid));
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
- ieee80211_send_auth(dev, ifsta, 1, NULL, 0, 0);
+ ieee80211_send_auth(sdata, ifsta, 1, NULL, 0, 0);
mod_timer(&ifsta->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
}
return count;
}
-static void ieee80211_send_assoc(struct net_device *dev,
+static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos, *ies;
ifsta->ssid_len);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for assoc "
- "frame\n", dev->name);
+ "frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
}
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ bss = ieee80211_rx_bss_get(local, ifsta->bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len);
if (bss) {
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, ifsta->bssid, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
if (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET) {
skb_put(skb, 10);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_REASSOC_REQ);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_REASSOC_REQ);
mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
mgmt->u.reassoc_req.listen_interval =
cpu_to_le16(local->hw.conf.listen_interval);
ETH_ALEN);
} else {
skb_put(skb, 4);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ASSOC_REQ);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ASSOC_REQ);
mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
mgmt->u.reassoc_req.listen_interval =
cpu_to_le16(local->hw.conf.listen_interval);
if (ifsta->assocreq_ies)
memcpy(ifsta->assocreq_ies, ies, ifsta->assocreq_ies_len);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static void ieee80211_send_deauth(struct net_device *dev,
+static void ieee80211_send_deauth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta, u16 reason)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt));
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for deauth "
- "frame\n", dev->name);
+ "frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, ifsta->bssid, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_DEAUTH);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_DEAUTH);
skb_put(skb, 2);
mgmt->u.deauth.reason_code = cpu_to_le16(reason);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static void ieee80211_send_disassoc(struct net_device *dev,
+static void ieee80211_send_disassoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta, u16 reason)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt));
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for disassoc "
- "frame\n", dev->name);
+ "frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, ifsta->bssid, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_DISASSOC);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_DISASSOC);
skb_put(skb, 2);
mgmt->u.disassoc.reason_code = cpu_to_le16(reason);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static int ieee80211_privacy_mismatch(struct net_device *dev,
+static int ieee80211_privacy_mismatch(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss;
int bss_privacy;
int wep_privacy;
if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL))
return 0;
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ bss = ieee80211_rx_bss_get(local, ifsta->bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len);
if (!bss)
return 0;
bss_privacy = !!(bss->capability & WLAN_CAPABILITY_PRIVACY);
- wep_privacy = !!ieee80211_sta_wep_configured(dev);
+ wep_privacy = !!ieee80211_sta_wep_configured(sdata);
privacy_invoked = !!(ifsta->flags & IEEE80211_STA_PRIVACY_INVOKED);
ieee80211_rx_bss_put(local, bss);
}
-static void ieee80211_associate(struct net_device *dev,
+static void ieee80211_associate(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
DECLARE_MAC_BUF(mac);
if (ifsta->assoc_tries > IEEE80211_ASSOC_MAX_TRIES) {
printk(KERN_DEBUG "%s: association with AP %s"
" timed out\n",
- dev->name, print_mac(mac, ifsta->bssid));
- ifsta->state = IEEE80211_DISABLED;
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
return;
}
- ifsta->state = IEEE80211_ASSOCIATE;
+ ifsta->state = IEEE80211_STA_MLME_ASSOCIATE;
printk(KERN_DEBUG "%s: associate with AP %s\n",
- dev->name, print_mac(mac, ifsta->bssid));
- if (ieee80211_privacy_mismatch(dev, ifsta)) {
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
+ if (ieee80211_privacy_mismatch(sdata, ifsta)) {
printk(KERN_DEBUG "%s: mismatch in privacy configuration and "
- "mixed-cell disabled - abort association\n", dev->name);
- ifsta->state = IEEE80211_DISABLED;
+ "mixed-cell disabled - abort association\n", sdata->dev->name);
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
return;
}
- ieee80211_send_assoc(dev, ifsta);
+ ieee80211_send_assoc(sdata, ifsta);
mod_timer(&ifsta->timer, jiffies + IEEE80211_ASSOC_TIMEOUT);
}
-static void ieee80211_associated(struct net_device *dev,
+static void ieee80211_associated(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int disassoc;
DECLARE_MAC_BUF(mac);
* for better APs. */
/* TODO: remove expired BSSes */
- ifsta->state = IEEE80211_ASSOCIATED;
+ ifsta->state = IEEE80211_STA_MLME_ASSOCIATED;
rcu_read_lock();
sta = sta_info_get(local, ifsta->bssid);
if (!sta) {
printk(KERN_DEBUG "%s: No STA entry for own AP %s\n",
- dev->name, print_mac(mac, ifsta->bssid));
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
disassoc = 1;
} else {
disassoc = 0;
printk(KERN_DEBUG "%s: No ProbeResp from "
"current AP %s - assume out of "
"range\n",
- dev->name, print_mac(mac, ifsta->bssid));
+ sdata->dev->name, print_mac(mac, ifsta->bssid));
disassoc = 1;
sta_info_unlink(&sta);
} else
- ieee80211_send_probe_req(dev, ifsta->bssid,
+ ieee80211_send_probe_req(sdata, ifsta->bssid,
local->scan_ssid,
local->scan_ssid_len);
ifsta->flags ^= IEEE80211_STA_PROBEREQ_POLL;
if (time_after(jiffies, ifsta->last_probe +
IEEE80211_PROBE_INTERVAL)) {
ifsta->last_probe = jiffies;
- ieee80211_send_probe_req(dev, ifsta->bssid,
+ ieee80211_send_probe_req(sdata, ifsta->bssid,
ifsta->ssid,
ifsta->ssid_len);
}
sta_info_destroy(sta);
if (disassoc) {
- ifsta->state = IEEE80211_DISABLED;
- ieee80211_set_associated(dev, ifsta, 0);
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_set_associated(sdata, ifsta, 0);
} else {
mod_timer(&ifsta->timer, jiffies +
IEEE80211_MONITORING_INTERVAL);
}
-static void ieee80211_send_probe_req(struct net_device *dev, u8 *dst,
+static void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
u8 *ssid, size_t ssid_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + 200);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for probe "
- "request\n", dev->name);
+ "request\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_PROBE_REQ);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_PROBE_REQ);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (dst) {
memcpy(mgmt->da, dst, ETH_ALEN);
memcpy(mgmt->bssid, dst, ETH_ALEN);
*pos = rate->bitrate / 5;
}
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static int ieee80211_sta_wep_configured(struct net_device *dev)
+static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (!sdata || !sdata->default_key ||
sdata->default_key->conf.alg != ALG_WEP)
return 0;
}
-static void ieee80211_auth_completed(struct net_device *dev,
+static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- printk(KERN_DEBUG "%s: authenticated\n", dev->name);
+ printk(KERN_DEBUG "%s: authenticated\n", sdata->dev->name);
ifsta->flags |= IEEE80211_STA_AUTHENTICATED;
- ieee80211_associate(dev, ifsta);
+ ieee80211_associate(sdata, ifsta);
}
-static void ieee80211_auth_challenge(struct net_device *dev,
+static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len)
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.challenge)
return;
- ieee80211_send_auth(dev, ifsta, 3, elems.challenge - 2,
+ ieee80211_send_auth(sdata, ifsta, 3, elems.challenge - 2,
elems.challenge_len + 2, 1);
}
-static void ieee80211_send_addba_resp(struct net_device *dev, u8 *da, u16 tid,
+static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
u8 dialog_token, u16 status, u16 policy,
u16 buf_size, u16 timeout)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u16 capab;
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer "
- "for addba resp frame\n", dev->name);
+ "for addba resp frame\n", sdata->dev->name);
return;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (sdata->vif.type == IEEE80211_IF_TYPE_AP)
- memcpy(mgmt->bssid, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
else
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
mgmt->u.action.category = WLAN_CATEGORY_BACK;
mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
return;
}
-void ieee80211_send_addba_request(struct net_device *dev, const u8 *da,
+void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata, const u8 *da,
u16 tid, u8 dialog_token, u16 start_seq_num,
u16 agg_size, u16 timeout)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer "
- "for addba request frame\n", dev->name);
+ "for addba request frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (sdata->vif.type == IEEE80211_IF_TYPE_AP)
- memcpy(mgmt->bssid, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
else
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
mgmt->u.action.u.addba_req.start_seq_num =
cpu_to_le16(start_seq_num << 4);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static void ieee80211_sta_process_addba_request(struct net_device *dev,
+static void ieee80211_sta_process_addba_request(struct ieee80211_local *local,
struct ieee80211_mgmt *mgmt,
size_t len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_conf *conf = &hw->conf;
struct sta_info *sta;
spin_unlock_bh(&sta->lock);
end_no_lock:
- ieee80211_send_addba_resp(sta->sdata->dev, sta->addr, tid,
+ ieee80211_send_addba_resp(sta->sdata, sta->addr, tid,
dialog_token, status, 1, buf_size, timeout);
rcu_read_unlock();
}
-static void ieee80211_sta_process_addba_resp(struct net_device *dev,
+static void ieee80211_sta_process_addba_resp(struct ieee80211_local *local,
struct ieee80211_mgmt *mgmt,
size_t len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hw *hw = &local->hw;
struct sta_info *sta;
u16 capab;
rcu_read_unlock();
}
-void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid,
+void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid,
u16 initiator, u16 reason_code)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer "
- "for delba frame\n", dev->name);
+ "for delba frame\n", sdata->dev->name);
return;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (sdata->vif.type == IEEE80211_IF_TYPE_AP)
- memcpy(mgmt->bssid, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
else
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
mgmt->u.action.u.delba.params = cpu_to_le16(params);
mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-void ieee80211_send_bar(struct net_device *dev, u8 *ra, u16 tid, u16 ssn)
+void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_bar *bar;
u16 bar_control = 0;
skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer for "
- "bar frame\n", dev->name);
+ "bar frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
bar = (struct ieee80211_bar *)skb_put(skb, sizeof(*bar));
memset(bar, 0, sizeof(*bar));
- bar->frame_control = IEEE80211_FC(IEEE80211_FTYPE_CTL,
- IEEE80211_STYPE_BACK_REQ);
+ bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
+ IEEE80211_STYPE_BACK_REQ);
memcpy(bar->ra, ra, ETH_ALEN);
- memcpy(bar->ta, dev->dev_addr, ETH_ALEN);
+ memcpy(bar->ta, sdata->dev->dev_addr, ETH_ALEN);
bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
bar_control |= (u16)(tid << 12);
bar->control = cpu_to_le16(bar_control);
bar->start_seq_num = cpu_to_le16(ssn);
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *ra, u16 tid,
+void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid,
u16 initiator, u16 reason)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_hw *hw = &local->hw;
struct sta_info *sta;
int ret, i;
/* check if this is a self generated aggregation halt */
if (initiator == WLAN_BACK_RECIPIENT || initiator == WLAN_BACK_TIMER)
- ieee80211_send_delba(dev, ra, tid, 0, reason);
+ ieee80211_send_delba(sdata, ra, tid, 0, reason);
/* free the reordering buffer */
for (i = 0; i < sta->ampdu_mlme.tid_rx[tid]->buf_size; i++) {
}
-static void ieee80211_sta_process_delba(struct net_device *dev,
+static void ieee80211_sta_process_delba(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u16 tid, params;
u16 initiator;
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (initiator == WLAN_BACK_INITIATOR)
- ieee80211_sta_stop_rx_ba_session(dev, sta->addr, tid,
+ ieee80211_sta_stop_rx_ba_session(sdata, sta->addr, tid,
WLAN_BACK_INITIATOR, 0);
else { /* WLAN_BACK_RECIPIENT */
spin_lock_bh(&sta->lock);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
#endif
- ieee80211_sta_stop_rx_ba_session(sta->sdata->dev, sta->addr,
+ ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->addr,
(u16)*ptid, WLAN_BACK_TIMER,
WLAN_REASON_QSTA_TIMEOUT);
}
-void ieee80211_sta_tear_down_BA_sessions(struct net_device *dev, u8 *addr)
+void ieee80211_sta_tear_down_BA_sessions(struct ieee80211_sub_if_data *sdata, u8 *addr)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
int i;
for (i = 0; i < STA_TID_NUM; i++) {
ieee80211_stop_tx_ba_session(&local->hw, addr, i,
WLAN_BACK_INITIATOR);
- ieee80211_sta_stop_rx_ba_session(dev, addr, i,
+ ieee80211_sta_stop_rx_ba_session(sdata, addr, i,
WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_LEAVE_QBSS);
}
}
-static void ieee80211_send_refuse_measurement_request(struct net_device *dev,
+static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata,
struct ieee80211_msrment_ie *request_ie,
const u8 *da, const u8 *bssid,
u8 dialog_token)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *msr_report;
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer for "
- "measurement report frame\n", dev->name);
+ "measurement report frame\n", sdata->dev->name);
return;
}
msr_report = (struct ieee80211_mgmt *)skb_put(skb, 24);
memset(msr_report, 0, 24);
memcpy(msr_report->da, da, ETH_ALEN);
- memcpy(msr_report->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(msr_report->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(msr_report->bssid, bssid, ETH_ALEN);
- msr_report->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ msr_report->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement));
IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED;
msr_report->u.action.u.measurement.msr_elem.type = request_ie->type;
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static void ieee80211_sta_process_measurement_req(struct net_device *dev,
+static void ieee80211_sta_process_measurement_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len)
{
* For now just refuse
* TODO: Answer basic measurement as unmeasured
*/
- ieee80211_send_refuse_measurement_request(dev,
+ ieee80211_send_refuse_measurement_request(sdata,
&mgmt->u.action.u.measurement.msr_elem,
mgmt->sa, mgmt->bssid,
mgmt->u.action.u.measurement.dialog_token);
}
-static void ieee80211_rx_mgmt_auth(struct net_device *dev,
+static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
u16 auth_alg, auth_transaction, status_code;
DECLARE_MAC_BUF(mac);
- if (ifsta->state != IEEE80211_AUTHENTICATE &&
+ if (ifsta->state != IEEE80211_STA_MLME_AUTHENTICATE &&
sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
return;
*/
if (auth_alg != WLAN_AUTH_OPEN || auth_transaction != 1)
return;
- ieee80211_send_auth(dev, ifsta, 2, NULL, 0, 0);
+ ieee80211_send_auth(sdata, ifsta, 2, NULL, 0, 0);
}
if (auth_alg != ifsta->auth_alg ||
algs[pos] == 0xff)
continue;
if (algs[pos] == WLAN_AUTH_SHARED_KEY &&
- !ieee80211_sta_wep_configured(dev))
+ !ieee80211_sta_wep_configured(sdata))
continue;
ifsta->auth_alg = algs[pos];
break;
switch (ifsta->auth_alg) {
case WLAN_AUTH_OPEN:
case WLAN_AUTH_LEAP:
- ieee80211_auth_completed(dev, ifsta);
+ ieee80211_auth_completed(sdata, ifsta);
break;
case WLAN_AUTH_SHARED_KEY:
if (ifsta->auth_transaction == 4)
- ieee80211_auth_completed(dev, ifsta);
+ ieee80211_auth_completed(sdata, ifsta);
else
- ieee80211_auth_challenge(dev, ifsta, mgmt, len);
+ ieee80211_auth_challenge(sdata, ifsta, mgmt, len);
break;
}
}
-static void ieee80211_rx_mgmt_deauth(struct net_device *dev,
+static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len)
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
if (ifsta->flags & IEEE80211_STA_AUTHENTICATED)
- printk(KERN_DEBUG "%s: deauthenticated\n", dev->name);
+ printk(KERN_DEBUG "%s: deauthenticated\n", sdata->dev->name);
- if (ifsta->state == IEEE80211_AUTHENTICATE ||
- ifsta->state == IEEE80211_ASSOCIATE ||
- ifsta->state == IEEE80211_ASSOCIATED) {
- ifsta->state = IEEE80211_AUTHENTICATE;
+ if (ifsta->state == IEEE80211_STA_MLME_AUTHENTICATE ||
+ ifsta->state == IEEE80211_STA_MLME_ASSOCIATE ||
+ ifsta->state == IEEE80211_STA_MLME_ASSOCIATED) {
+ ifsta->state = IEEE80211_STA_MLME_DIRECT_PROBE;
mod_timer(&ifsta->timer, jiffies +
IEEE80211_RETRY_AUTH_INTERVAL);
}
- ieee80211_set_disassoc(dev, ifsta, 1);
+ ieee80211_set_disassoc(sdata, ifsta, 1);
ifsta->flags &= ~IEEE80211_STA_AUTHENTICATED;
}
-static void ieee80211_rx_mgmt_disassoc(struct net_device *dev,
+static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len)
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
if (ifsta->flags & IEEE80211_STA_ASSOCIATED)
- printk(KERN_DEBUG "%s: disassociated\n", dev->name);
+ printk(KERN_DEBUG "%s: disassociated\n", sdata->dev->name);
- if (ifsta->state == IEEE80211_ASSOCIATED) {
- ifsta->state = IEEE80211_ASSOCIATE;
+ if (ifsta->state == IEEE80211_STA_MLME_ASSOCIATED) {
+ ifsta->state = IEEE80211_STA_MLME_ASSOCIATE;
mod_timer(&ifsta->timer, jiffies +
IEEE80211_RETRY_AUTH_INTERVAL);
}
- ieee80211_set_disassoc(dev, ifsta, 0);
+ ieee80211_set_disassoc(sdata, ifsta, 0);
}
int reassoc)
{
struct ieee80211_local *local = sdata->local;
- struct net_device *dev = sdata->dev;
struct ieee80211_supported_band *sband;
struct sta_info *sta;
u64 rates, basic_rates;
/* AssocResp and ReassocResp have identical structure, so process both
* of them in this function. */
- if (ifsta->state != IEEE80211_ASSOCIATE)
+ if (ifsta->state != IEEE80211_STA_MLME_ASSOCIATE)
return;
if (len < 24 + 6)
printk(KERN_DEBUG "%s: RX %sssocResp from %s (capab=0x%x "
"status=%d aid=%d)\n",
- dev->name, reassoc ? "Rea" : "A", print_mac(mac, mgmt->sa),
+ sdata->dev->name, reassoc ? "Rea" : "A", print_mac(mac, mgmt->sa),
capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
if (status_code != WLAN_STATUS_SUCCESS) {
printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
- dev->name, status_code);
+ sdata->dev->name, status_code);
/* if this was a reassociation, ensure we try a "full"
* association next time. This works around some broken APs
* which do not correctly reject reassociation requests. */
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not "
- "set\n", dev->name, aid);
+ "set\n", sdata->dev->name, aid);
aid &= ~(BIT(15) | BIT(14));
pos = mgmt->u.assoc_resp.variable;
if (!elems.supp_rates) {
printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
- dev->name);
+ sdata->dev->name);
return;
}
- printk(KERN_DEBUG "%s: associated\n", dev->name);
+ printk(KERN_DEBUG "%s: associated\n", sdata->dev->name);
ifsta->aid = aid;
ifsta->ap_capab = capab_info;
sta = sta_info_alloc(sdata, ifsta->bssid, GFP_ATOMIC);
if (!sta) {
printk(KERN_DEBUG "%s: failed to alloc STA entry for"
- " the AP\n", dev->name);
+ " the AP\n", sdata->dev->name);
rcu_read_unlock();
return;
}
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ bss = ieee80211_rx_bss_get(local, ifsta->bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len);
if (bss) {
err = sta_info_insert(sta);
if (err) {
printk(KERN_DEBUG "%s: failed to insert STA entry for"
- " the AP (error %d)\n", dev->name, err);
+ " the AP (error %d)\n", sdata->dev->name, err);
rcu_read_unlock();
return;
}
if (elems.wmm_param) {
set_sta_flags(sta, WLAN_STA_WME);
rcu_read_unlock();
- ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
+ ieee80211_sta_wmm_params(local, ifsta, elems.wmm_param,
elems.wmm_param_len);
} else
rcu_read_unlock();
* ieee80211_set_associated() will tell the driver */
bss_conf->aid = aid;
bss_conf->assoc_capability = capab_info;
- ieee80211_set_associated(dev, ifsta, 1);
+ ieee80211_set_associated(sdata, ifsta, 1);
- ieee80211_associated(dev, ifsta);
+ ieee80211_associated(sdata, ifsta);
}
/* Caller must hold local->sta_bss_lock */
-static void __ieee80211_rx_bss_hash_add(struct net_device *dev,
+static void __ieee80211_rx_bss_hash_add(struct ieee80211_local *local,
struct ieee80211_sta_bss *bss)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
u8 hash_idx;
if (bss_mesh_cfg(bss))
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_add(struct net_device *dev, u8 *bssid, int freq,
+ieee80211_rx_bss_add(struct ieee80211_sub_if_data *sdata, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss;
bss = kzalloc(sizeof(*bss), GFP_ATOMIC);
spin_lock_bh(&local->sta_bss_lock);
/* TODO: order by RSSI? */
list_add_tail(&bss->list, &local->sta_bss_list);
- __ieee80211_rx_bss_hash_add(dev, bss);
+ __ieee80211_rx_bss_hash_add(local, bss);
spin_unlock_bh(&local->sta_bss_lock);
return bss;
}
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid, int freq,
+ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
spin_lock_bh(&local->sta_bss_lock);
#ifdef CONFIG_MAC80211_MESH
static struct ieee80211_sta_bss *
-ieee80211_rx_mesh_bss_get(struct net_device *dev, u8 *mesh_id, int mesh_id_len,
+ieee80211_rx_mesh_bss_get(struct ieee80211_local *local, u8 *mesh_id, int mesh_id_len,
u8 *mesh_cfg, int freq)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
spin_lock_bh(&local->sta_bss_lock);
}
static struct ieee80211_sta_bss *
-ieee80211_rx_mesh_bss_add(struct net_device *dev, u8 *mesh_id, int mesh_id_len,
+ieee80211_rx_mesh_bss_add(struct ieee80211_local *local, u8 *mesh_id, int mesh_id_len,
u8 *mesh_cfg, int mesh_config_len, int freq)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
if (mesh_config_len != MESH_CFG_LEN)
spin_lock_bh(&local->sta_bss_lock);
/* TODO: order by RSSI? */
list_add_tail(&bss->list, &local->sta_bss_list);
- __ieee80211_rx_bss_hash_add(dev, bss);
+ __ieee80211_rx_bss_hash_add(local, bss);
spin_unlock_bh(&local->sta_bss_lock);
return bss;
}
}
-static int ieee80211_sta_join_ibss(struct net_device *dev,
+static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_sta_bss *bss)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
int res, rates, i, j;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos;
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
union iwreq_data wrqu;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
/* Remove possible STA entries from other IBSS networks. */
sta_info_flush_delayed(sdata);
sdata->drop_unencrypted = bss->capability &
WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- res = ieee80211_set_freq(dev, bss->freq);
+ res = ieee80211_set_freq(sdata, bss->freq);
if (res)
return res;
mgmt = (struct ieee80211_mgmt *)
skb_put(skb, 24 + sizeof(mgmt->u.beacon));
memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_PROBE_RESP);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_PROBE_RESP);
memset(mgmt->da, 0xff, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
mgmt->u.beacon.beacon_int =
cpu_to_le16(local->hw.conf.beacon_int);
}
ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
- ieee80211_sta_def_wmm_params(dev, bss, 1);
+ ieee80211_sta_def_wmm_params(sdata, bss, 1);
- ifsta->state = IEEE80211_IBSS_JOINED;
+ ifsta->state = IEEE80211_STA_MLME_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
memset(&wrqu, 0, sizeof(wrqu));
memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
return res;
}
}
-static void ieee80211_rx_bss_info(struct net_device *dev,
+static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status,
- struct ieee802_11_elems *elems,
- int beacon)
+ struct ieee802_11_elems *elems)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
int freq, clen;
struct ieee80211_sta_bss *bss;
struct sta_info *sta;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
u64 beacon_timestamp, rx_timestamp;
struct ieee80211_channel *channel;
+ bool beacon = ieee80211_is_beacon(mgmt->frame_control);
DECLARE_MAC_BUF(mac);
DECLARE_MAC_BUF(mac2);
- if (!beacon && memcmp(mgmt->da, dev->dev_addr, ETH_ALEN))
- return; /* ignore ProbeResp to foreign address */
-
beacon_timestamp = le64_to_cpu(mgmt->u.beacon.timestamp);
if (ieee80211_vif_is_mesh(&sdata->vif) && elems->mesh_id &&
- elems->mesh_config && mesh_matches_local(elems, dev)) {
+ elems->mesh_config && mesh_matches_local(elems, sdata)) {
u64 rates = ieee80211_sta_get_rates(local, elems,
rx_status->band);
- mesh_neighbour_update(mgmt->sa, rates, dev,
- mesh_peer_accepts_plinks(elems, dev));
+ mesh_neighbour_update(mgmt->sa, rates, sdata,
+ mesh_peer_accepts_plinks(elems));
}
rcu_read_lock();
#ifdef CONFIG_MAC80211_MESH
if (elems->mesh_config)
- bss = ieee80211_rx_mesh_bss_get(dev, elems->mesh_id,
+ bss = ieee80211_rx_mesh_bss_get(local, elems->mesh_id,
elems->mesh_id_len, elems->mesh_config, freq);
else
#endif
- bss = ieee80211_rx_bss_get(dev, mgmt->bssid, freq,
+ bss = ieee80211_rx_bss_get(local, mgmt->bssid, freq,
elems->ssid, elems->ssid_len);
if (!bss) {
#ifdef CONFIG_MAC80211_MESH
if (elems->mesh_config)
- bss = ieee80211_rx_mesh_bss_add(dev, elems->mesh_id,
+ bss = ieee80211_rx_mesh_bss_add(local, elems->mesh_id,
elems->mesh_id_len, elems->mesh_config,
elems->mesh_config_len, freq);
else
#endif
- bss = ieee80211_rx_bss_add(dev, mgmt->bssid, freq,
+ bss = ieee80211_rx_bss_add(sdata, mgmt->bssid, freq,
elems->ssid, elems->ssid_len);
if (!bss)
return;
bss->signal = rx_status->signal;
bss->noise = rx_status->noise;
bss->qual = rx_status->qual;
- if (!beacon && !bss->probe_resp)
- bss->probe_resp = true;
-
+ if (!beacon)
+ bss->last_probe_resp = jiffies;
/*
* In STA mode, the remaining parameters should not be overridden
* by beacons because they're not necessarily accurate there.
*/
if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
- bss->probe_resp && beacon) {
+ bss->last_probe_resp && beacon) {
ieee80211_rx_bss_put(local, bss);
return;
}
#ifndef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: beacon TSF higher than "
"local TSF - IBSS merge with BSSID %s\n",
- dev->name, print_mac(mac, mgmt->bssid));
+ sdata->dev->name, print_mac(mac, mgmt->bssid));
#endif
- ieee80211_sta_join_ibss(dev, &sdata->u.sta, bss);
- ieee80211_ibss_add_sta(dev, NULL,
+ ieee80211_sta_join_ibss(sdata, &sdata->u.sta, bss);
+ ieee80211_ibss_add_sta(sdata, NULL,
mgmt->bssid, mgmt->sa,
BIT(rx_status->rate_idx));
}
}
-static void ieee80211_rx_mgmt_probe_resp(struct net_device *dev,
+static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
size_t baselen;
struct ieee802_11_elems elems;
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+
+ if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
+ return; /* ignore ProbeResp to foreign address */
baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
if (baselen > len)
ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
&elems);
- ieee80211_rx_bss_info(dev, mgmt, len, rx_status, &elems, 0);
+ ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
+
+ /* direct probe may be part of the association flow */
+ if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
+ &ifsta->request)) {
+ printk(KERN_DEBUG "%s direct probe responded\n",
+ sdata->dev->name);
+ ieee80211_authenticate(sdata, ifsta);
+ }
}
-static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
+static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_sta *ifsta;
size_t baselen;
struct ieee802_11_elems elems;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_conf *conf = &local->hw.conf;
u32 changed = 0;
ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
- ieee80211_rx_bss_info(dev, mgmt, len, rx_status, &elems, 1);
+ ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return;
ifsta = &sdata->u.sta;
memcmp(ifsta->bssid, mgmt->bssid, ETH_ALEN) != 0)
return;
- ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
+ ieee80211_sta_wmm_params(local, ifsta, elems.wmm_param,
elems.wmm_param_len);
/* Do not send changes to driver if we are scanning. This removes
}
-static void ieee80211_rx_mgmt_probe_req(struct net_device *dev,
+static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
int tx_last_beacon;
struct sk_buff *skb;
struct ieee80211_mgmt *resp;
#endif
if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS ||
- ifsta->state != IEEE80211_IBSS_JOINED ||
+ ifsta->state != IEEE80211_STA_MLME_IBSS_JOINED ||
len < 24 + 2 || !ifsta->probe_resp)
return;
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: RX ProbeReq SA=%s DA=%s BSSID="
"%s (tx_last_beacon=%d)\n",
- dev->name, print_mac(mac, mgmt->sa), print_mac(mac2, mgmt->da),
+ sdata->dev->name, print_mac(mac, mgmt->sa), print_mac(mac2, mgmt->da),
print_mac(mac3, mgmt->bssid), tx_last_beacon);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: Invalid SSID IE in ProbeReq "
"from %s\n",
- dev->name, print_mac(mac, mgmt->sa));
+ sdata->dev->name, print_mac(mac, mgmt->sa));
#endif
return;
}
memcpy(resp->da, mgmt->sa, ETH_ALEN);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: Sending ProbeResp to %s\n",
- dev->name, print_mac(mac, resp->da));
+ sdata->dev->name, print_mac(mac, resp->da));
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
-static void ieee80211_rx_mgmt_action(struct net_device *dev,
+static void ieee80211_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
if (len < IEEE80211_MIN_ACTION_SIZE)
return;
if (len < (IEEE80211_MIN_ACTION_SIZE +
sizeof(mgmt->u.action.u.measurement)))
break;
- ieee80211_sta_process_measurement_req(dev, mgmt, len);
+ ieee80211_sta_process_measurement_req(sdata, mgmt, len);
break;
}
break;
if (len < (IEEE80211_MIN_ACTION_SIZE +
sizeof(mgmt->u.action.u.addba_req)))
break;
- ieee80211_sta_process_addba_request(dev, mgmt, len);
+ ieee80211_sta_process_addba_request(local, mgmt, len);
break;
case WLAN_ACTION_ADDBA_RESP:
if (len < (IEEE80211_MIN_ACTION_SIZE +
sizeof(mgmt->u.action.u.addba_resp)))
break;
- ieee80211_sta_process_addba_resp(dev, mgmt, len);
+ ieee80211_sta_process_addba_resp(local, mgmt, len);
break;
case WLAN_ACTION_DELBA:
if (len < (IEEE80211_MIN_ACTION_SIZE +
sizeof(mgmt->u.action.u.delba)))
break;
- ieee80211_sta_process_delba(dev, mgmt, len);
+ ieee80211_sta_process_delba(sdata, mgmt, len);
break;
}
break;
case PLINK_CATEGORY:
if (ieee80211_vif_is_mesh(&sdata->vif))
- mesh_rx_plink_frame(dev, mgmt, len, rx_status);
+ mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
break;
case MESH_PATH_SEL_CATEGORY:
if (ieee80211_vif_is_mesh(&sdata->vif))
- mesh_rx_path_sel_frame(dev, mgmt, len);
+ mesh_rx_path_sel_frame(sdata, mgmt, len);
break;
}
}
-void ieee80211_sta_rx_mgmt(struct net_device *dev, struct sk_buff *skb,
+void ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_sta *ifsta;
struct ieee80211_mgmt *mgmt;
u16 fc;
if (skb->len < 24)
goto fail;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifsta = &sdata->u.sta;
mgmt = (struct ieee80211_mgmt *) skb->data;
}
-static void ieee80211_sta_rx_queued_mgmt(struct net_device *dev,
+static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_rx_status *rx_status;
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_sta *ifsta;
struct ieee80211_mgmt *mgmt;
u16 fc;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifsta = &sdata->u.sta;
rx_status = (struct ieee80211_rx_status *) skb->cb;
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_PROBE_REQ:
- ieee80211_rx_mgmt_probe_req(dev, ifsta, mgmt, skb->len,
+ ieee80211_rx_mgmt_probe_req(sdata, ifsta, mgmt, skb->len,
rx_status);
break;
case IEEE80211_STYPE_PROBE_RESP:
- ieee80211_rx_mgmt_probe_resp(dev, mgmt, skb->len, rx_status);
+ ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, rx_status);
break;
case IEEE80211_STYPE_BEACON:
- ieee80211_rx_mgmt_beacon(dev, mgmt, skb->len, rx_status);
+ ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
break;
case IEEE80211_STYPE_AUTH:
- ieee80211_rx_mgmt_auth(dev, ifsta, mgmt, skb->len);
+ ieee80211_rx_mgmt_auth(sdata, ifsta, mgmt, skb->len);
break;
case IEEE80211_STYPE_ASSOC_RESP:
ieee80211_rx_mgmt_assoc_resp(sdata, ifsta, mgmt, skb->len, 0);
ieee80211_rx_mgmt_assoc_resp(sdata, ifsta, mgmt, skb->len, 1);
break;
case IEEE80211_STYPE_DEAUTH:
- ieee80211_rx_mgmt_deauth(dev, ifsta, mgmt, skb->len);
+ ieee80211_rx_mgmt_deauth(sdata, ifsta, mgmt, skb->len);
break;
case IEEE80211_STYPE_DISASSOC:
- ieee80211_rx_mgmt_disassoc(dev, ifsta, mgmt, skb->len);
+ ieee80211_rx_mgmt_disassoc(sdata, ifsta, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- ieee80211_rx_mgmt_action(dev, ifsta, mgmt, skb->len, rx_status);
+ ieee80211_rx_mgmt_action(sdata, ifsta, mgmt, skb->len, rx_status);
break;
}
ieee80211_rx_result
-ieee80211_sta_rx_scan(struct net_device *dev, struct sk_buff *skb,
+ieee80211_sta_rx_scan(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_mgmt *mgmt;
return RX_DROP_MONITOR;
if (ieee80211_is_probe_resp(fc)) {
- ieee80211_rx_mgmt_probe_resp(dev, mgmt, skb->len, rx_status);
+ ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, rx_status);
dev_kfree_skb(skb);
return RX_QUEUED;
}
if (ieee80211_is_beacon(fc)) {
- ieee80211_rx_mgmt_beacon(dev, mgmt, skb->len, rx_status);
+ ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
dev_kfree_skb(skb);
return RX_QUEUED;
}
}
-static int ieee80211_sta_active_ibss(struct net_device *dev)
+static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
int active = 0;
struct sta_info *sta;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
}
-static void ieee80211_sta_expire(struct net_device *dev, unsigned long exp_time)
+static void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, unsigned long exp_time)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta, *tmp;
LIST_HEAD(tmp_list);
DECLARE_MAC_BUF(mac);
if (time_after(jiffies, sta->last_rx + exp_time)) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: expiring inactive STA %s\n",
- dev->name, print_mac(mac, sta->addr));
+ sdata->dev->name, print_mac(mac, sta->addr));
#endif
__sta_info_unlink(&sta);
if (sta)
}
-static void ieee80211_sta_merge_ibss(struct net_device *dev,
+static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_sta_expire(dev, IEEE80211_IBSS_INACTIVITY_LIMIT);
- if (ieee80211_sta_active_ibss(dev))
+ ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT);
+ if (ieee80211_sta_active_ibss(sdata))
return;
printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
- "IBSS networks with same SSID (merge)\n", dev->name);
- ieee80211_sta_req_scan(dev, ifsta->ssid, ifsta->ssid_len);
+ "IBSS networks with same SSID (merge)\n", sdata->dev->name);
+ ieee80211_sta_req_scan(sdata, ifsta->ssid, ifsta->ssid_len);
}
#ifdef CONFIG_MAC80211_MESH
-static void ieee80211_mesh_housekeeping(struct net_device *dev,
+static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
bool free_plinks;
- ieee80211_sta_expire(dev, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
- mesh_path_expire(dev);
+ ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
+ mesh_path_expire(sdata);
free_plinks = mesh_plink_availables(sdata);
if (free_plinks != sdata->u.sta.accepting_plinks)
}
-void ieee80211_start_mesh(struct net_device *dev)
+void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_sta *ifsta;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifsta = &sdata->u.sta;
- ifsta->state = IEEE80211_MESH_UP;
+ ifsta->state = IEEE80211_STA_MLME_MESH_UP;
ieee80211_sta_timer((unsigned long)sdata);
ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
}
struct ieee80211_sub_if_data *sdata =
(struct ieee80211_sub_if_data *) data;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- struct ieee80211_local *local = wdev_priv(&sdata->wdev);
+ struct ieee80211_local *local = sdata->local;
set_bit(IEEE80211_STA_REQ_RUN, &ifsta->request);
queue_work(local->hw.workqueue, &ifsta->work);
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data, u.sta.work);
- struct net_device *dev = sdata->dev;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_sta *ifsta;
struct sk_buff *skb;
- if (!netif_running(dev))
+ if (!netif_running(sdata->dev))
return;
if (local->sta_sw_scanning || local->sta_hw_scanning)
ifsta = &sdata->u.sta;
while ((skb = skb_dequeue(&ifsta->skb_queue)))
- ieee80211_sta_rx_queued_mgmt(dev, skb);
+ ieee80211_sta_rx_queued_mgmt(sdata, skb);
#ifdef CONFIG_MAC80211_MESH
if (ifsta->preq_queue_len &&
time_after(jiffies,
ifsta->last_preq + msecs_to_jiffies(ifsta->mshcfg.dot11MeshHWMPpreqMinInterval)))
- mesh_path_start_discovery(dev);
+ mesh_path_start_discovery(sdata);
#endif
- if (ifsta->state != IEEE80211_AUTHENTICATE &&
- ifsta->state != IEEE80211_ASSOCIATE &&
+ if (ifsta->state != IEEE80211_STA_MLME_DIRECT_PROBE &&
+ ifsta->state != IEEE80211_STA_MLME_AUTHENTICATE &&
+ ifsta->state != IEEE80211_STA_MLME_ASSOCIATE &&
test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifsta->request)) {
if (ifsta->scan_ssid_len)
- ieee80211_sta_start_scan(dev, ifsta->scan_ssid, ifsta->scan_ssid_len);
+ ieee80211_sta_start_scan(sdata, ifsta->scan_ssid, ifsta->scan_ssid_len);
else
- ieee80211_sta_start_scan(dev, NULL, 0);
+ ieee80211_sta_start_scan(sdata, NULL, 0);
return;
}
if (test_and_clear_bit(IEEE80211_STA_REQ_AUTH, &ifsta->request)) {
- if (ieee80211_sta_config_auth(dev, ifsta))
+ if (ieee80211_sta_config_auth(sdata, ifsta))
return;
clear_bit(IEEE80211_STA_REQ_RUN, &ifsta->request);
} else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifsta->request))
return;
switch (ifsta->state) {
- case IEEE80211_DISABLED:
+ case IEEE80211_STA_MLME_DISABLED:
+ break;
+ case IEEE80211_STA_MLME_DIRECT_PROBE:
+ ieee80211_direct_probe(sdata, ifsta);
break;
- case IEEE80211_AUTHENTICATE:
- ieee80211_authenticate(dev, ifsta);
+ case IEEE80211_STA_MLME_AUTHENTICATE:
+ ieee80211_authenticate(sdata, ifsta);
break;
- case IEEE80211_ASSOCIATE:
- ieee80211_associate(dev, ifsta);
+ case IEEE80211_STA_MLME_ASSOCIATE:
+ ieee80211_associate(sdata, ifsta);
break;
- case IEEE80211_ASSOCIATED:
- ieee80211_associated(dev, ifsta);
+ case IEEE80211_STA_MLME_ASSOCIATED:
+ ieee80211_associated(sdata, ifsta);
break;
- case IEEE80211_IBSS_SEARCH:
- ieee80211_sta_find_ibss(dev, ifsta);
+ case IEEE80211_STA_MLME_IBSS_SEARCH:
+ ieee80211_sta_find_ibss(sdata, ifsta);
break;
- case IEEE80211_IBSS_JOINED:
- ieee80211_sta_merge_ibss(dev, ifsta);
+ case IEEE80211_STA_MLME_IBSS_JOINED:
+ ieee80211_sta_merge_ibss(sdata, ifsta);
break;
#ifdef CONFIG_MAC80211_MESH
- case IEEE80211_MESH_UP:
- ieee80211_mesh_housekeeping(dev, ifsta);
+ case IEEE80211_STA_MLME_MESH_UP:
+ ieee80211_mesh_housekeeping(sdata, ifsta);
break;
#endif
default:
break;
}
- if (ieee80211_privacy_mismatch(dev, ifsta)) {
+ if (ieee80211_privacy_mismatch(sdata, ifsta)) {
printk(KERN_DEBUG "%s: privacy configuration mismatch and "
- "mixed-cell disabled - disassociate\n", dev->name);
+ "mixed-cell disabled - disassociate\n", sdata->dev->name);
- ieee80211_send_disassoc(dev, ifsta, WLAN_REASON_UNSPECIFIED);
- ieee80211_set_disassoc(dev, ifsta, 0);
+ ieee80211_send_disassoc(sdata, ifsta, WLAN_REASON_UNSPECIFIED);
+ ieee80211_set_disassoc(sdata, ifsta, 0);
}
}
-static void ieee80211_sta_reset_auth(struct net_device *dev,
+static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
if (local->ops->reset_tsf) {
/* Reset own TSF to allow time synchronization work. */
ifsta->auth_alg = WLAN_AUTH_OPEN;
ifsta->auth_transaction = -1;
ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
- ifsta->auth_tries = ifsta->assoc_tries = 0;
- netif_carrier_off(dev);
+ ifsta->assoc_scan_tries = 0;
+ ifsta->direct_probe_tries = 0;
+ ifsta->auth_tries = 0;
+ ifsta->assoc_tries = 0;
+ netif_carrier_off(sdata->dev);
}
-void ieee80211_sta_req_auth(struct net_device *dev,
+void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return;
return 0;
}
-static int ieee80211_sta_config_auth(struct net_device *dev,
+static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
spin_unlock_bh(&local->sta_bss_lock);
if (selected) {
- ieee80211_set_freq(dev, selected->freq);
+ ieee80211_set_freq(sdata, selected->freq);
if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
- ieee80211_sta_set_ssid(dev, selected->ssid,
+ ieee80211_sta_set_ssid(sdata, selected->ssid,
selected->ssid_len);
- ieee80211_sta_set_bssid(dev, selected->bssid);
- ieee80211_sta_def_wmm_params(dev, selected, 0);
+ ieee80211_sta_set_bssid(sdata, selected->bssid);
+ ieee80211_sta_def_wmm_params(sdata, selected, 0);
+
+ /* Send out direct probe if no probe resp was received or
+ * the one we have is outdated
+ */
+ if (!selected->last_probe_resp ||
+ time_after(jiffies, selected->last_probe_resp
+ + IEEE80211_SCAN_RESULT_EXPIRE))
+ ifsta->state = IEEE80211_STA_MLME_DIRECT_PROBE;
+ else
+ ifsta->state = IEEE80211_STA_MLME_AUTHENTICATE;
+
ieee80211_rx_bss_put(local, selected);
- ifsta->state = IEEE80211_AUTHENTICATE;
- ieee80211_sta_reset_auth(dev, ifsta);
+ ieee80211_sta_reset_auth(sdata, ifsta);
return 0;
} else {
- if (ifsta->state != IEEE80211_AUTHENTICATE) {
+ if (ifsta->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) {
+ ifsta->assoc_scan_tries++;
if (ifsta->flags & IEEE80211_STA_AUTO_SSID_SEL)
- ieee80211_sta_start_scan(dev, NULL, 0);
+ ieee80211_sta_start_scan(sdata, NULL, 0);
else
- ieee80211_sta_start_scan(dev, ifsta->ssid,
+ ieee80211_sta_start_scan(sdata, ifsta->ssid,
ifsta->ssid_len);
- ifsta->state = IEEE80211_AUTHENTICATE;
+ ifsta->state = IEEE80211_STA_MLME_AUTHENTICATE;
set_bit(IEEE80211_STA_REQ_AUTH, &ifsta->request);
} else
- ifsta->state = IEEE80211_DISABLED;
+ ifsta->state = IEEE80211_STA_MLME_DISABLED;
}
return -1;
}
-static int ieee80211_sta_create_ibss(struct net_device *dev,
+static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
* random number generator get different BSSID. */
get_random_bytes(bssid, ETH_ALEN);
for (i = 0; i < ETH_ALEN; i++)
- bssid[i] ^= dev->dev_addr[i];
+ bssid[i] ^= sdata->dev->dev_addr[i];
bssid[0] &= ~0x01;
bssid[0] |= 0x02;
#endif
printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %s\n",
- dev->name, print_mac(mac, bssid));
+ sdata->dev->name, print_mac(mac, bssid));
- bss = ieee80211_rx_bss_add(dev, bssid,
+ bss = ieee80211_rx_bss_add(sdata, bssid,
local->hw.conf.channel->center_freq,
sdata->u.sta.ssid, sdata->u.sta.ssid_len);
if (!bss)
*pos++ = (u8) (rate / 5);
}
- ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(sdata, ifsta, bss);
ieee80211_rx_bss_put(local, bss);
return ret;
}
-static int ieee80211_sta_find_ibss(struct net_device *dev,
+static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss;
int found = 0;
u8 bssid[ETH_ALEN];
if (ifsta->ssid_len == 0)
return -EINVAL;
- active_ibss = ieee80211_sta_active_ibss(dev);
+ active_ibss = ieee80211_sta_active_ibss(sdata);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: sta_find_ibss (active_ibss=%d)\n",
- dev->name, active_ibss);
+ sdata->dev->name, active_ibss);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
spin_lock_bh(&local->sta_bss_lock);
list_for_each_entry(bss, &local->sta_bss_list, list) {
else
search_freq = local->hw.conf.channel->center_freq;
- bss = ieee80211_rx_bss_get(dev, bssid, search_freq,
+ bss = ieee80211_rx_bss_get(local, bssid, search_freq,
ifsta->ssid, ifsta->ssid_len);
if (!bss)
goto dont_join;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
- dev->name, print_mac(mac, bssid));
- ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ sdata->dev->name, print_mac(mac, bssid));
+ ret = ieee80211_sta_join_ibss(sdata, ifsta, bss);
ieee80211_rx_bss_put(local, bss);
return ret;
}
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
/* Selected IBSS not found in current scan results - try to scan */
- if (ifsta->state == IEEE80211_IBSS_JOINED &&
- !ieee80211_sta_active_ibss(dev)) {
+ if (ifsta->state == IEEE80211_STA_MLME_IBSS_JOINED &&
+ !ieee80211_sta_active_ibss(sdata)) {
mod_timer(&ifsta->timer, jiffies +
IEEE80211_IBSS_MERGE_INTERVAL);
} else if (time_after(jiffies, local->last_scan_completed +
IEEE80211_SCAN_INTERVAL)) {
printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to "
- "join\n", dev->name);
- return ieee80211_sta_req_scan(dev, ifsta->ssid,
+ "join\n", sdata->dev->name);
+ return ieee80211_sta_req_scan(sdata, ifsta->ssid,
ifsta->ssid_len);
- } else if (ifsta->state != IEEE80211_IBSS_JOINED) {
+ } else if (ifsta->state != IEEE80211_STA_MLME_IBSS_JOINED) {
int interval = IEEE80211_SCAN_INTERVAL;
if (time_after(jiffies, ifsta->ibss_join_req +
if ((ifsta->flags & IEEE80211_STA_CREATE_IBSS) &&
(!(local->oper_channel->flags &
IEEE80211_CHAN_NO_IBSS)))
- return ieee80211_sta_create_ibss(dev, ifsta);
+ return ieee80211_sta_create_ibss(sdata, ifsta);
if (ifsta->flags & IEEE80211_STA_CREATE_IBSS) {
printk(KERN_DEBUG "%s: IBSS not allowed on"
- " %d MHz\n", dev->name,
+ " %d MHz\n", sdata->dev->name,
local->hw.conf.channel->center_freq);
}
interval = IEEE80211_SCAN_INTERVAL_SLOW;
}
- ifsta->state = IEEE80211_IBSS_SEARCH;
+ ifsta->state = IEEE80211_STA_MLME_IBSS_SEARCH;
mod_timer(&ifsta->timer, jiffies + interval);
return 0;
}
}
-int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len)
+int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta;
int res;
res = ieee80211_if_config(sdata, IEEE80211_IFCC_SSID);
if (res) {
printk(KERN_DEBUG "%s: Failed to config new SSID to "
- "the low-level driver\n", dev->name);
+ "the low-level driver\n", sdata->dev->name);
return res;
}
}
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
!(ifsta->flags & IEEE80211_STA_BSSID_SET)) {
ifsta->ibss_join_req = jiffies;
- ifsta->state = IEEE80211_IBSS_SEARCH;
- return ieee80211_sta_find_ibss(dev, ifsta);
+ ifsta->state = IEEE80211_STA_MLME_IBSS_SEARCH;
+ return ieee80211_sta_find_ibss(sdata, ifsta);
}
return 0;
}
-int ieee80211_sta_get_ssid(struct net_device *dev, char *ssid, size_t *len)
+int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
memcpy(ssid, ifsta->ssid, ifsta->ssid_len);
*len = ifsta->ssid_len;
}
-int ieee80211_sta_set_bssid(struct net_device *dev, u8 *bssid)
+int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
{
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_sta *ifsta;
int res;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifsta = &sdata->u.sta;
if (memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0) {
res = ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
if (res) {
printk(KERN_DEBUG "%s: Failed to config new BSSID to "
- "the low-level driver\n", dev->name);
+ "the low-level driver\n", sdata->dev->name);
return res;
}
}
memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
memcpy(nullfunc->addr3, sdata->u.sta.bssid, ETH_ALEN);
- ieee80211_sta_tx(sdata->dev, skb, 0);
+ ieee80211_sta_tx(sdata, skb, 0);
}
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
- (!(ifsta->state == IEEE80211_IBSS_JOINED) &&
- !ieee80211_sta_active_ibss(dev)))
- ieee80211_sta_find_ibss(dev, ifsta);
+ (!(ifsta->state == IEEE80211_STA_MLME_IBSS_JOINED) &&
+ !ieee80211_sta_active_ibss(sdata)))
+ ieee80211_sta_find_ibss(sdata, ifsta);
}
}
EXPORT_SYMBOL(ieee80211_scan_completed);
if (local->scan_channel->flags & IEEE80211_CHAN_PASSIVE_SCAN)
break;
- ieee80211_send_probe_req(dev, NULL, local->scan_ssid,
+ ieee80211_send_probe_req(sdata, NULL, local->scan_ssid,
local->scan_ssid_len);
next_delay = IEEE80211_CHANNEL_TIME;
break;
}
-static int ieee80211_sta_start_scan(struct net_device *dev,
+static int ieee80211_sta_start_scan(struct ieee80211_sub_if_data *scan_sdata,
u8 *ssid, size_t ssid_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = scan_sdata->local;
struct ieee80211_sub_if_data *sdata;
if (ssid_len > IEEE80211_MAX_SSID_LEN)
*/
if (local->sta_sw_scanning || local->sta_hw_scanning) {
- if (local->scan_dev == dev)
+ if (local->scan_dev == scan_sdata->dev)
return 0;
return -EBUSY;
}
ssid, ssid_len);
if (!rc) {
local->sta_hw_scanning = 1;
- local->scan_dev = dev;
+ local->scan_dev = scan_sdata->dev;
}
return rc;
}
local->scan_state = SCAN_SET_CHANNEL;
local->scan_channel_idx = 0;
local->scan_band = IEEE80211_BAND_2GHZ;
- local->scan_dev = dev;
+ local->scan_dev = scan_sdata->dev;
netif_addr_lock_bh(local->mdev);
local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
}
-int ieee80211_sta_req_scan(struct net_device *dev, u8 *ssid, size_t ssid_len)
+int ieee80211_sta_req_scan(struct ieee80211_sub_if_data *sdata, u8 *ssid, size_t ssid_len)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
- return ieee80211_sta_start_scan(dev, ssid, ssid_len);
+ return ieee80211_sta_start_scan(sdata, ssid, ssid_len);
if (local->sta_sw_scanning || local->sta_hw_scanning) {
- if (local->scan_dev == dev)
+ if (local->scan_dev == sdata->dev)
return 0;
return -EBUSY;
}
}
static char *
-ieee80211_sta_scan_result(struct net_device *dev,
+ieee80211_sta_scan_result(struct ieee80211_local *local,
struct iw_request_info *info,
struct ieee80211_sta_bss *bss,
char *current_ev, char *end_buf)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_event iwe;
if (time_after(jiffies,
}
-int ieee80211_sta_scan_results(struct net_device *dev,
+int ieee80211_sta_scan_results(struct ieee80211_local *local,
struct iw_request_info *info,
char *buf, size_t len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
char *current_ev = buf;
char *end_buf = buf + len;
struct ieee80211_sta_bss *bss;
spin_unlock_bh(&local->sta_bss_lock);
return -E2BIG;
}
- current_ev = ieee80211_sta_scan_result(dev, info, bss,
+ current_ev = ieee80211_sta_scan_result(local, info, bss,
current_ev, end_buf);
}
spin_unlock_bh(&local->sta_bss_lock);
}
-int ieee80211_sta_set_extra_ie(struct net_device *dev, char *ie, size_t len)
+int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata, char *ie, size_t len)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
kfree(ifsta->extra_ie);
}
-struct sta_info *ieee80211_ibss_add_sta(struct net_device *dev,
+struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u8 *bssid,
u8 *addr, u64 supp_rates)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
int band = local->hw.conf.channel->band;
if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: No room for a new IBSS STA "
- "entry %s\n", dev->name, print_mac(mac, addr));
+ "entry %s\n", sdata->dev->name, print_mac(mac, addr));
}
return NULL;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: Adding new IBSS station %s (dev=%s)\n",
- wiphy_name(local->hw.wiphy), print_mac(mac, addr), dev->name);
+ wiphy_name(local->hw.wiphy), print_mac(mac, addr), sdata->dev->name);
#endif
sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
}
-int ieee80211_sta_deauthenticate(struct net_device *dev, u16 reason)
+int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
- dev->name, reason);
+ sdata->dev->name, reason);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA &&
sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
return -EINVAL;
- ieee80211_send_deauth(dev, ifsta, reason);
- ieee80211_set_disassoc(dev, ifsta, 1);
+ ieee80211_send_deauth(sdata, ifsta, reason);
+ ieee80211_set_disassoc(sdata, ifsta, 1);
return 0;
}
-int ieee80211_sta_disassociate(struct net_device *dev, u16 reason)
+int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
- dev->name, reason);
+ sdata->dev->name, reason);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return -EINVAL;
if (!(ifsta->flags & IEEE80211_STA_ASSOCIATED))
return -1;
- ieee80211_send_disassoc(dev, ifsta, reason);
- ieee80211_set_disassoc(dev, ifsta, 0);
+ ieee80211_send_disassoc(sdata, ifsta, reason);
+ ieee80211_set_disassoc(sdata, ifsta, 0);
return 0;
}
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
continue;
- ieee80211_sta_req_auth(sdata->dev, &sdata->u.sta);
+ ieee80211_sta_req_auth(sdata, &sdata->u.sta);
}
rcu_read_unlock();
break;
/* IEEE80211_RADIOTAP_FLAGS */
if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
*pos |= IEEE80211_RADIOTAP_F_FCS;
+ if (status->flag & RX_FLAG_SHORTPRE)
+ *pos |= IEEE80211_RADIOTAP_F_SHORTPRE;
pos++;
/* IEEE80211_RADIOTAP_RATE */
if (status->band == IEEE80211_BAND_5GHZ)
*(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_5GHZ);
+ else if (rate->flags & IEEE80211_RATE_ERP_G)
+ *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
+ IEEE80211_CHAN_2GHZ);
else
- *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_DYN |
+ *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_CCK |
IEEE80211_CHAN_2GHZ);
pos += 2;
struct sk_buff *skb = rx->skb;
if (unlikely(local->sta_hw_scanning))
- return ieee80211_sta_rx_scan(rx->dev, skb, rx->status);
+ return ieee80211_sta_rx_scan(rx->sdata, skb, rx->status);
if (unlikely(local->sta_sw_scanning)) {
/* drop all the other packets during a software scan anyway */
- if (ieee80211_sta_rx_scan(rx->dev, skb, rx->status)
+ if (ieee80211_sta_rx_scan(rx->sdata, skb, rx->status)
!= RX_QUEUED)
dev_kfree_skb(skb);
return RX_QUEUED;
if (ieee80211_is_data(hdr->frame_control) &&
is_multicast_ether_addr(hdr->addr1) &&
- mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->dev))
+ mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->sdata))
return RX_DROP_MONITOR;
#undef msh_h_get
static inline struct ieee80211_fragment_entry *
ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
- u16 fc, unsigned int frag, unsigned int seq,
+ unsigned int frag, unsigned int seq,
int rx_queue, struct ieee80211_hdr *hdr)
{
struct ieee80211_fragment_entry *entry;
idx = sdata->fragment_next;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
struct ieee80211_hdr *f_hdr;
- u16 f_fc;
idx--;
if (idx < 0)
entry->last_frag + 1 != frag)
continue;
- f_hdr = (struct ieee80211_hdr *) entry->skb_list.next->data;
- f_fc = le16_to_cpu(f_hdr->frame_control);
+ f_hdr = (struct ieee80211_hdr *)entry->skb_list.next->data;
- if ((fc & IEEE80211_FCTL_FTYPE) != (f_fc & IEEE80211_FCTL_FTYPE) ||
+ /*
+ * Check ftype and addresses are equal, else check next fragment
+ */
+ if (((hdr->frame_control ^ f_hdr->frame_control) &
+ cpu_to_le16(IEEE80211_FCTL_FTYPE)) ||
compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 ||
compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0)
continue;
{
struct ieee80211_hdr *hdr;
u16 sc;
+ __le16 fc;
unsigned int frag, seq;
struct ieee80211_fragment_entry *entry;
struct sk_buff *skb;
DECLARE_MAC_BUF(mac);
- hdr = (struct ieee80211_hdr *) rx->skb->data;
+ hdr = (struct ieee80211_hdr *)rx->skb->data;
+ fc = hdr->frame_control;
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
- if (likely((!(rx->fc & IEEE80211_FCTL_MOREFRAGS) && frag == 0) ||
+ if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
(rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->queue, &(rx->skb));
if (rx->key && rx->key->conf.alg == ALG_CCMP &&
- (rx->fc & IEEE80211_FCTL_PROTECTED)) {
+ ieee80211_has_protected(fc)) {
/* Store CCMP PN so that we can verify that the next
* fragment has a sequential PN value. */
entry->ccmp = 1;
/* This is a fragment for a frame that should already be pending in
* fragment cache. Add this fragment to the end of the pending entry.
*/
- entry = ieee80211_reassemble_find(rx->sdata, rx->fc, frag, seq,
- rx->queue, hdr);
+ entry = ieee80211_reassemble_find(rx->sdata, frag, seq, rx->queue, hdr);
if (!entry) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
return RX_DROP_MONITOR;
memcpy(entry->last_pn, pn, CCMP_PN_LEN);
}
- skb_pull(rx->skb, ieee80211_get_hdrlen(rx->fc));
+ skb_pull(rx->skb, ieee80211_hdrlen(fc));
__skb_queue_tail(&entry->skb_list, rx->skb);
entry->last_frag = frag;
entry->extra_len += rx->skb->len;
- if (rx->fc & IEEE80211_FCTL_MOREFRAGS) {
+ if (ieee80211_has_morefrags(fc)) {
rx->skb = NULL;
return RX_QUEUED;
}
struct sk_buff *skb;
int no_pending_pkts;
DECLARE_MAC_BUF(mac);
+ __le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control;
- if (likely(!rx->sta ||
- (rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_CTL ||
- (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PSPOLL ||
+ if (likely(!rx->sta || !ieee80211_is_pspoll(fc) ||
!(rx->flags & IEEE80211_RX_RA_MATCH)))
return RX_CONTINUE;
ieee80211_hdrlen(hdr->frame_control) - IEEE80211_QOS_CTL_LEN);
hdr = (struct ieee80211_hdr *)skb_pull(rx->skb, IEEE80211_QOS_CTL_LEN);
/* change frame type to non QOS */
- rx->fc &= ~IEEE80211_STYPE_QOS_DATA;
hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
return RX_CONTINUE;
}
static int
-ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx)
+ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
{
/*
* Pass through unencrypted frames if the hardware has
return 0;
/* Drop unencrypted frames if key is set. */
- if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) &&
- (rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
- (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC &&
+ if (unlikely(!ieee80211_has_protected(fc) &&
+ !ieee80211_is_nullfunc(fc) &&
(rx->key || rx->sdata->drop_unencrypted)))
return -EACCES;
{
struct net_device *dev = rx->dev;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
- u16 fc, hdrlen, ethertype;
+ u16 hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN] __aligned(2);
DECLARE_MAC_BUF(mac3);
DECLARE_MAC_BUF(mac4);
- fc = rx->fc;
-
- if (unlikely(!WLAN_FC_DATA_PRESENT(fc)))
+ if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
return -1;
- hdrlen = ieee80211_get_hdrlen(fc);
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (ieee80211_vif_is_mesh(&sdata->vif))
hdrlen += ieee80211_get_mesh_hdrlen(
* 1 0 BSSID SA DA n/a
* 1 1 RA TA DA SA
*/
+ memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
+ memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
- switch (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
- case IEEE80211_FCTL_TODS:
- /* BSSID SA DA */
- memcpy(dst, hdr->addr3, ETH_ALEN);
- memcpy(src, hdr->addr2, ETH_ALEN);
-
+ switch (hdr->frame_control &
+ cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+ case __constant_cpu_to_le16(IEEE80211_FCTL_TODS):
if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_AP &&
sdata->vif.type != IEEE80211_IF_TYPE_VLAN))
return -1;
break;
- case (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
- /* RA TA DA SA */
- memcpy(dst, hdr->addr3, ETH_ALEN);
- memcpy(src, hdr->addr4, ETH_ALEN);
-
- if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
+ case __constant_cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
+ if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT))
return -1;
break;
- case IEEE80211_FCTL_FROMDS:
- /* DA BSSID SA */
- memcpy(dst, hdr->addr1, ETH_ALEN);
- memcpy(src, hdr->addr3, ETH_ALEN);
-
+ case __constant_cpu_to_le16(IEEE80211_FCTL_FROMDS):
if (sdata->vif.type != IEEE80211_IF_TYPE_STA ||
(is_multicast_ether_addr(dst) &&
!compare_ether_addr(src, dev->dev_addr)))
return -1;
break;
- case 0:
- /* DA SA BSSID */
- memcpy(dst, hdr->addr1, ETH_ALEN);
- memcpy(src, hdr->addr2, ETH_ALEN);
-
+ case __constant_cpu_to_le16(0):
if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
return -1;
break;
/*
* requires that rx->skb is a frame with ethernet header
*/
-static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
+static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc)
{
static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
return true;
if (ieee80211_802_1x_port_control(rx) ||
- ieee80211_drop_unencrypted(rx))
+ ieee80211_drop_unencrypted(rx, fc))
return false;
return true;
{
struct net_device *dev = rx->dev;
struct ieee80211_local *local = rx->local;
- u16 fc, ethertype;
+ u16 ethertype;
u8 *payload;
struct sk_buff *skb = rx->skb, *frame = NULL;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ __le16 fc = hdr->frame_control;
const struct ethhdr *eth;
int remaining, err;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
DECLARE_MAC_BUF(mac);
- fc = rx->fc;
- if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA))
+ if (unlikely(!ieee80211_is_data(fc)))
return RX_CONTINUE;
- if (unlikely(!WLAN_FC_DATA_PRESENT(fc)))
+ if (unlikely(!ieee80211_is_data_present(fc)))
return RX_DROP_MONITOR;
if (!(rx->flags & IEEE80211_RX_AMSDU))
memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
}
- if (!ieee80211_frame_allowed(rx)) {
+ if (!ieee80211_frame_allowed(rx, fc)) {
if (skb == frame) /* last frame */
return RX_DROP_UNUSABLE;
dev_kfree_skb(frame);
ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
{
struct net_device *dev = rx->dev;
- u16 fc;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+ __le16 fc = hdr->frame_control;
int err;
- fc = rx->fc;
- if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA))
+ if (unlikely(!ieee80211_is_data(hdr->frame_control)))
return RX_CONTINUE;
- if (unlikely(!WLAN_FC_DATA_PRESENT(fc)))
+ if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
return RX_DROP_MONITOR;
err = ieee80211_data_to_8023(rx);
if (unlikely(err))
return RX_DROP_UNUSABLE;
- if (!ieee80211_frame_allowed(rx))
+ if (!ieee80211_frame_allowed(rx, fc))
return RX_DROP_MONITOR;
rx->skb->dev = dev;
sdata->vif.type == IEEE80211_IF_TYPE_IBSS ||
sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
- ieee80211_sta_rx_mgmt(rx->dev, rx->skb, rx->status);
+ ieee80211_sta_rx_mgmt(sdata, rx->skb, rx->status);
else
return RX_DROP_MONITOR;
!ieee80211_is_auth(hdr->frame_control))
goto ignore;
- mac80211_ev_michael_mic_failure(rx->dev, keyidx, hdr);
+ mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr);
ignore:
dev_kfree_skb(rx->skb);
rx->skb = NULL;
return 0;
if (ieee80211_is_beacon(hdr->frame_control)) {
if (!rx->sta)
- rx->sta = ieee80211_ibss_add_sta(sdata->dev,
+ rx->sta = ieee80211_ibss_add_sta(sdata,
rx->skb, bssid, hdr->addr2,
BIT(rx->status->rate_idx));
return 1;
return 0;
rx->flags &= ~IEEE80211_RX_RA_MATCH;
} else if (!rx->sta)
- rx->sta = ieee80211_ibss_add_sta(sdata->dev, rx->skb,
+ rx->sta = ieee80211_ibss_add_sta(sdata, rx->skb,
bssid, hdr->addr2,
BIT(rx->status->rate_idx));
break;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hdr *hdr;
struct ieee80211_rx_data rx;
- u16 type;
int prepares;
struct ieee80211_sub_if_data *prev = NULL;
struct sk_buff *skb_new;
u8 *bssid;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr *)skb->data;
memset(&rx, 0, sizeof(rx));
rx.skb = skb;
rx.local = local;
rx.status = status;
rx.rate = rate;
- rx.fc = le16_to_cpu(hdr->frame_control);
- type = rx.fc & IEEE80211_FCTL_FTYPE;
- if (type == IEEE80211_FTYPE_DATA || type == IEEE80211_FTYPE_MGMT)
+ if (ieee80211_is_data(hdr->frame_control) || ieee80211_is_mgmt(hdr->frame_control))
local->dot11ReceivedFragmentCount++;
rx.sta = sta_info_get(local, hdr->addr2);
prev->dev->name);
continue;
}
- rx.fc = le16_to_cpu(hdr->frame_control);
ieee80211_invoke_rx_handlers(prev, &rx, skb_new);
prev = sdata;
}
- if (prev) {
- rx.fc = le16_to_cpu(hdr->frame_control);
+ if (prev)
ieee80211_invoke_rx_handlers(prev, &rx, skb);
- } else
+ else
dev_kfree_skb(skb);
}
/* if this mpdu is fragmented - terminate rx aggregation session */
sc = le16_to_cpu(hdr->seq_ctrl);
if (sc & IEEE80211_SCTL_FRAG) {
- ieee80211_sta_stop_rx_ba_session(sta->sdata->dev, sta->addr,
+ ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->addr,
tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP);
ret = 1;
goto end_reorder;
struct ieee80211_rate *txrate;
struct ieee80211_local *local = tx->local;
struct ieee80211_supported_band *sband;
+ struct ieee80211_hdr *hdr;
sband = local->hw.wiphy->bands[tx->channel->band];
txrate = &sband->bitrates[tx->rate_idx];
* at the highest possible rate belonging to the PHY rates in the
* BSSBasicRateSet
*/
-
- if ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) {
+ hdr = (struct ieee80211_hdr *)tx->skb->data;
+ if (ieee80211_is_ctl(hdr->frame_control)) {
/* TODO: These control frames are not currently sent by
* 80211.o, but should they be implemented, this function
* needs to be updated to support duration field calculation.
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
{
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
u32 sta_flags;
return TX_CONTINUE;
if (unlikely(tx->local->sta_sw_scanning) &&
- ((tx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT ||
- (tx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PROBE_REQ))
+ !ieee80211_is_probe_req(hdr->frame_control))
return TX_DROP;
if (tx->sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT)
if (likely(tx->flags & IEEE80211_TX_UNICAST)) {
if (unlikely(!(sta_flags & WLAN_STA_ASSOC) &&
tx->sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
- (tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) {
+ ieee80211_is_data(hdr->frame_control))) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: dropped data frame to not "
return TX_DROP;
}
} else {
- if (unlikely((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
+ if (unlikely(ieee80211_is_data(hdr->frame_control) &&
tx->local->num_sta == 0 &&
tx->sdata->vif.type != IEEE80211_IF_TYPE_IBSS)) {
/*
ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
/*
* broadcast/multicast frame
return TX_CONTINUE;
/* no buffering for ordered frames */
- if (tx->fc & IEEE80211_FCTL_ORDER)
+ if (ieee80211_has_order(hdr->frame_control))
return TX_CONTINUE;
/* no stations in PS mode */
{
struct sta_info *sta = tx->sta;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
u32 staflags;
DECLARE_MAC_BUF(mac);
- if (unlikely(!sta ||
- ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT &&
- (tx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)))
+ if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)))
return TX_CONTINUE;
staflags = get_sta_flags(sta);
{
struct ieee80211_key *key;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- u16 fc = tx->fc;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
if (unlikely(tx->skb->do_not_encrypt))
tx->key = NULL;
tx->key = NULL;
if (tx->key) {
- u16 ftype, stype;
-
tx->key->tx_rx_count++;
/* TODO: add threshold stuff again */
switch (tx->key->conf.alg) {
case ALG_WEP:
- ftype = fc & IEEE80211_FCTL_FTYPE;
- stype = fc & IEEE80211_FCTL_STYPE;
-
- if (ftype == IEEE80211_FTYPE_MGMT &&
- stype == IEEE80211_STYPE_AUTH)
+ if (ieee80211_is_auth(hdr->frame_control))
break;
case ALG_TKIP:
case ALG_CCMP:
- if (!WLAN_FC_DATA_PRESENT(fc))
+ if (!ieee80211_is_data_present(hdr->frame_control))
tx->key = NULL;
break;
}
hdr = (struct ieee80211_hdr *) skb->data;
tx->sta = sta_info_get(local, hdr->addr1);
- tx->fc = le16_to_cpu(hdr->frame_control);
if (is_multicast_ether_addr(hdr->addr1)) {
tx->flags &= ~IEEE80211_TX_UNICAST;
else if (test_and_clear_sta_flags(tx->sta, WLAN_STA_CLEAR_PS_FILT))
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
- hdrlen = ieee80211_get_hdrlen(tx->fc);
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
tx->ethertype = (pos[0] << 8) | pos[1];
if (is_multicast_ether_addr(hdr->addr3))
memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
else
- if (mesh_nexthop_lookup(skb, odev))
+ if (mesh_nexthop_lookup(skb, osdata))
return 0;
if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.sta,
goto out;
hdr = (struct ieee80211_hdr *) skb->data;
- hdr->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_BEACON);
+ hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_BEACON);
num_beacons = &ifsta->num_beacons;
} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
- mesh_mgmt_ies_add(skb, sdata->dev);
+ mesh_mgmt_ies_add(skb, sdata);
num_beacons = &sdata->u.sta.num_beacons;
} else {
return NULL;
}
-int ieee80211_get_hdrlen(u16 fc)
-{
- int hdrlen = 24;
-
- switch (fc & IEEE80211_FCTL_FTYPE) {
- case IEEE80211_FTYPE_DATA:
- if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
- hdrlen = 30; /* Addr4 */
- /*
- * The QoS Control field is two bytes and its presence is
- * indicated by the IEEE80211_STYPE_QOS_DATA bit. Add 2 to
- * hdrlen if that bit is set.
- * This works by masking out the bit and shifting it to
- * bit position 1 so the result has the value 0 or 2.
- */
- hdrlen += (fc & IEEE80211_STYPE_QOS_DATA)
- >> (ilog2(IEEE80211_STYPE_QOS_DATA)-1);
- break;
- case IEEE80211_FTYPE_CTL:
- /*
- * ACK and CTS are 10 bytes, all others 16. To see how
- * to get this condition consider
- * subtype mask: 0b0000000011110000 (0x00F0)
- * ACK subtype: 0b0000000011010000 (0x00D0)
- * CTS subtype: 0b0000000011000000 (0x00C0)
- * bits that matter: ^^^ (0x00E0)
- * value of those: 0b0000000011000000 (0x00C0)
- */
- if ((fc & 0xE0) == 0xC0)
- hdrlen = 10;
- else
- hdrlen = 16;
- break;
- }
-
- return hdrlen;
-}
-EXPORT_SYMBOL(ieee80211_get_hdrlen);
-
unsigned int ieee80211_hdrlen(__le16 fc)
{
unsigned int hdrlen = 24;
}
EXPORT_SYMBOL(ieee80211_stop_queues);
+int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ return __netif_subqueue_stopped(local->mdev, queue);
+}
+EXPORT_SYMBOL(ieee80211_queue_stopped);
+
void ieee80211_wake_queues(struct ieee80211_hw *hw)
{
int i;
return -1;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
- if (skb->len < 8 + hdrlen)
+ if (skb->len < hdrlen + WEP_IV_LEN + WEP_ICV_LEN)
return -1;
- len = skb->len - hdrlen - 8;
+ len = skb->len - hdrlen - WEP_IV_LEN - WEP_ICV_LEN;
keyidx = skb->data[hdrlen + 3] >> 6;
ieee80211_rx_result
ieee80211_crypto_wep_decrypt(struct ieee80211_rx_data *rx)
{
- if ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA &&
- ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT ||
- (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_AUTH))
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+
+ if (!ieee80211_is_data(hdr->frame_control) &&
+ !ieee80211_is_auth(hdr->frame_control))
return RX_CONTINUE;
if (!(rx->status->flag & RX_FLAG_DECRYPTED)) {
} else if (!(rx->status->flag & RX_FLAG_IV_STRIPPED)) {
ieee80211_wep_remove_iv(rx->local, rx->skb, rx->key);
/* remove ICV */
- skb_trim(rx->skb, rx->skb->len - 4);
+ skb_trim(rx->skb, rx->skb->len - WEP_ICV_LEN);
}
return RX_CONTINUE;
#include "aes_ccm.h"
-static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr,
+static int ieee80211_set_encryption(struct ieee80211_sub_if_data *sdata, u8 *sta_addr,
int idx, int alg, int remove,
int set_tx_key, const u8 *_key,
size_t key_len)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
struct ieee80211_key *key;
- struct ieee80211_sub_if_data *sdata;
int err;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
if (idx < 0 || idx >= NUM_DEFAULT_KEYS) {
printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d\n",
- dev->name, idx);
+ sdata->dev->name, idx);
return -EINVAL;
}
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- int ret = ieee80211_sta_set_extra_ie(dev, extra, data->length);
+ int ret = ieee80211_sta_set_extra_ie(sdata, extra, data->length);
if (ret)
return ret;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- ieee80211_sta_req_auth(dev, &sdata->u.sta);
+ ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
}
return 0;
}
-int ieee80211_set_freq(struct net_device *dev, int freqMHz)
+int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
chan->flags & IEEE80211_CHAN_NO_IBSS) {
printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
- "%d MHz\n", dev->name, chan->center_freq);
+ "%d MHz\n", sdata->dev->name, chan->center_freq);
return ret;
}
local->oper_channel = chan;
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(dev,
+ return ieee80211_set_freq(sdata,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
- return ieee80211_set_freq(dev, freq->m / div);
+ return ieee80211_set_freq(sdata, freq->m / div);
else
return -EINVAL;
}
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
else
sdata->u.sta.flags |= IEEE80211_STA_AUTO_SSID_SEL;
- ret = ieee80211_sta_set_ssid(dev, ssid, len);
+ ret = ieee80211_sta_set_ssid(sdata, ssid, len);
if (ret)
return ret;
- ieee80211_sta_req_auth(dev, &sdata->u.sta);
+ ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
}
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- int res = ieee80211_sta_get_ssid(dev, ssid, &len);
+ int res = ieee80211_sta_get_ssid(sdata, ssid, &len);
if (res == 0) {
data->length = len;
data->flags = 1;
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL;
else
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- ret = ieee80211_sta_set_bssid(dev, (u8 *) &ap_addr->sa_data);
+ ret = ieee80211_sta_set_bssid(sdata, (u8 *) &ap_addr->sa_data);
if (ret)
return ret;
- ieee80211_sta_req_auth(dev, &sdata->u.sta);
+ ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
/*
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- if (sdata->u.sta.state == IEEE80211_ASSOCIATED ||
- sdata->u.sta.state == IEEE80211_IBSS_JOINED) {
+ if (sdata->u.sta.state == IEEE80211_STA_MLME_ASSOCIATED ||
+ sdata->u.sta.state == IEEE80211_STA_MLME_IBSS_JOINED) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
return 0;
ssid_len = req->essid_len;
}
- return ieee80211_sta_req_scan(dev, ssid, ssid_len);
+ return ieee80211_sta_req_scan(sdata, ssid, ssid_len);
}
{
int res;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (local->sta_sw_scanning || local->sta_hw_scanning)
return -EAGAIN;
- res = ieee80211_sta_scan_results(dev, info, extra, data->length);
+ res = ieee80211_sta_scan_results(local, info, extra, data->length);
if (res >= 0) {
data->length = res;
return 0;
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
/* TODO: mlme->addr.sa_data */
- return ieee80211_sta_deauthenticate(dev, mlme->reason_code);
+ return ieee80211_sta_deauthenticate(sdata, mlme->reason_code);
case IW_MLME_DISASSOC:
/* TODO: mlme->addr.sa_data */
- return ieee80211_sta_disassociate(dev, mlme->reason_code);
+ return ieee80211_sta_disassociate(sdata, mlme->reason_code);
default:
return -EOPNOTSUPP;
}
}
return ieee80211_set_encryption(
- dev, bcaddr,
+ sdata, bcaddr,
idx, alg, remove,
!sdata->default_key,
keybuf, erq->length);
} else
idx--;
- return ieee80211_set_encryption(dev, ext->addr.sa_data, idx, alg,
+ return ieee80211_set_encryption(sdata, ext->addr.sa_data, idx, alg,
remove,
ext->ext_flags &
IW_ENCODE_EXT_SET_TX_KEY,
#include <linux/netdevice.h>
#include "ieee80211_i.h"
-#define QOS_CONTROL_LEN 2
-
#define QOS_CONTROL_ACK_POLICY_NORMAL 0
#define QOS_CONTROL_ACK_POLICY_NOACK 1
if (!(rx->flags & IEEE80211_RX_RA_MATCH))
return RX_DROP_UNUSABLE;
- mac80211_ev_michael_mic_failure(rx->dev, rx->key->conf.keyidx,
+ mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
(void *) skb->data);
return RX_DROP_UNUSABLE;
}
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state);
void rfkill_epo(void);
+void rfkill_restore_states(void);
#endif /* __RFKILL_INPUT_H */
MODULE_PARM_DESC(default_state,
"Default initial state for all radio types, 0 = radio off");
-static enum rfkill_state rfkill_states[RFKILL_TYPE_MAX];
+struct rfkill_gsw_state {
+ enum rfkill_state current_state;
+ enum rfkill_state default_state;
+};
+
+static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX];
+static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
static BLOCKING_NOTIFIER_HEAD(rfkill_notifier_list);
* BLOCK even a transmitter that is already in state
* RFKILL_STATE_HARD_BLOCKED */
break;
+ default:
+ return -EINVAL;
}
if (force || state != rfkill->state) {
}
/**
- * rfkill_switch_all - Toggle state of all switches of given type
+ * __rfkill_switch_all - Toggle state of all switches of given type
* @type: type of interfaces to be affected
* @state: the new state
*
* This function toggles the state of all switches of given type,
* unless a specific switch is claimed by userspace (in which case,
* that switch is left alone) or suspended.
+ *
+ * Caller must have acquired rfkill_mutex.
*/
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
+static void __rfkill_switch_all(const enum rfkill_type type,
+ const enum rfkill_state state)
{
struct rfkill *rfkill;
- mutex_lock(&rfkill_mutex);
-
- rfkill_states[type] = state;
+ if (unlikely(state >= RFKILL_STATE_MAX))
+ return;
+ rfkill_global_states[type].current_state = state;
list_for_each_entry(rfkill, &rfkill_list, node) {
if ((!rfkill->user_claim) && (rfkill->type == type)) {
mutex_lock(&rfkill->mutex);
mutex_unlock(&rfkill->mutex);
}
}
+}
+/**
+ * rfkill_switch_all - Toggle state of all switches of given type
+ * @type: type of interfaces to be affected
+ * @state: the new state
+ *
+ * Acquires rfkill_mutex and calls __rfkill_switch_all(@type, @state).
+ * Please refer to __rfkill_switch_all() for details.
+ */
+void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
+{
+ mutex_lock(&rfkill_mutex);
+ __rfkill_switch_all(type, state);
mutex_unlock(&rfkill_mutex);
}
EXPORT_SYMBOL(rfkill_switch_all);
*
* This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
* ignoring everything in its path but rfkill_mutex and rfkill->mutex.
+ *
+ * The global state before the EPO is saved and can be restored later
+ * using rfkill_restore_states().
*/
void rfkill_epo(void)
{
struct rfkill *rfkill;
+ int i;
mutex_lock(&rfkill_mutex);
list_for_each_entry(rfkill, &rfkill_list, node) {
rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
mutex_unlock(&rfkill->mutex);
}
+ for (i = 0; i < RFKILL_TYPE_MAX; i++) {
+ rfkill_global_states[i].default_state =
+ rfkill_global_states[i].current_state;
+ rfkill_global_states[i].current_state =
+ RFKILL_STATE_SOFT_BLOCKED;
+ }
mutex_unlock(&rfkill_mutex);
}
EXPORT_SYMBOL_GPL(rfkill_epo);
+/**
+ * rfkill_restore_states - restore global states
+ *
+ * Restore (and sync switches to) the global state from the
+ * states in rfkill_default_states. This can undo the effects of
+ * a call to rfkill_epo().
+ */
+void rfkill_restore_states(void)
+{
+ int i;
+
+ mutex_lock(&rfkill_mutex);
+ for (i = 0; i < RFKILL_TYPE_MAX; i++)
+ __rfkill_switch_all(i, rfkill_global_states[i].default_state);
+ mutex_unlock(&rfkill_mutex);
+}
+EXPORT_SYMBOL_GPL(rfkill_restore_states);
+
/**
* rfkill_force_state - Force the internal rfkill radio state
* @rfkill: pointer to the rfkill class to modify.
{
enum rfkill_state oldstate;
- if (state != RFKILL_STATE_SOFT_BLOCKED &&
- state != RFKILL_STATE_UNBLOCKED &&
- state != RFKILL_STATE_HARD_BLOCKED)
+ if (unlikely(state >= RFKILL_STATE_MAX))
return -EINVAL;
mutex_lock(&rfkill->mutex);
if (!claim) {
mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill,
- rfkill_states[rfkill->type],
- 0);
+ rfkill_global_states[rfkill->type].current_state,
+ 0);
mutex_unlock(&rfkill->mutex);
}
rfkill->user_claim = claim;
.dev_uevent = rfkill_dev_uevent,
};
+static int rfkill_check_duplicity(const struct rfkill *rfkill)
+{
+ struct rfkill *p;
+ unsigned long seen[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
+
+ memset(seen, 0, sizeof(seen));
+
+ list_for_each_entry(p, &rfkill_list, node) {
+ if (p == rfkill) {
+ WARN_ON(1);
+ return -EEXIST;
+ }
+ set_bit(p->type, seen);
+ }
+
+ /* 0: first switch of its kind */
+ return test_bit(rfkill->type, seen);
+}
+
static int rfkill_add_switch(struct rfkill *rfkill)
{
+ int error;
+
mutex_lock(&rfkill_mutex);
- rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type], 0);
+ error = rfkill_check_duplicity(rfkill);
+ if (error < 0)
+ goto unlock_out;
+
+ if (!error) {
+ /* lock default after first use */
+ set_bit(rfkill->type, rfkill_states_lockdflt);
+ rfkill_global_states[rfkill->type].current_state =
+ rfkill_global_states[rfkill->type].default_state;
+ }
+
+ rfkill_toggle_radio(rfkill,
+ rfkill_global_states[rfkill->type].current_state,
+ 0);
list_add_tail(&rfkill->node, &rfkill_list);
+ error = 0;
+unlock_out:
mutex_unlock(&rfkill_mutex);
- return 0;
+ return error;
}
static void rfkill_remove_switch(struct rfkill *rfkill)
* NOTE: If registration fails the structure shoudl be freed by calling
* rfkill_free() otherwise rfkill_unregister() should be used.
*/
-struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type)
+struct rfkill * __must_check rfkill_allocate(struct device *parent,
+ enum rfkill_type type)
{
struct rfkill *rfkill;
struct device *dev;
* structure needs to be registered. Immediately from registration the
* switch driver should be able to service calls to toggle_radio.
*/
-int rfkill_register(struct rfkill *rfkill)
+int __must_check rfkill_register(struct rfkill *rfkill)
{
static atomic_t rfkill_no = ATOMIC_INIT(0);
struct device *dev = &rfkill->dev;
return -EINVAL;
if (rfkill->type >= RFKILL_TYPE_MAX)
return -EINVAL;
+ if (rfkill->state >= RFKILL_STATE_MAX)
+ return -EINVAL;
snprintf(dev->bus_id, sizeof(dev->bus_id),
"rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
}
EXPORT_SYMBOL(rfkill_unregister);
+/**
+ * rfkill_set_default - set initial value for a switch type
+ * @type - the type of switch to set the default state of
+ * @state - the new default state for that group of switches
+ *
+ * Sets the initial state rfkill should use for a given type.
+ * The following initial states are allowed: RFKILL_STATE_SOFT_BLOCKED
+ * and RFKILL_STATE_UNBLOCKED.
+ *
+ * This function is meant to be used by platform drivers for platforms
+ * that can save switch state across power down/reboot.
+ *
+ * The default state for each switch type can be changed exactly once.
+ * After a switch of that type is registered, the default state cannot
+ * be changed anymore. This guards against multiple drivers it the
+ * same platform trying to set the initial switch default state, which
+ * is not allowed.
+ *
+ * Returns -EPERM if the state has already been set once or is in use,
+ * so drivers likely want to either ignore or at most printk(KERN_NOTICE)
+ * if this function returns -EPERM.
+ *
+ * Returns 0 if the new default state was set, or an error if it
+ * could not be set.
+ */
+int rfkill_set_default(enum rfkill_type type, enum rfkill_state state)
+{
+ int error;
+
+ if (type >= RFKILL_TYPE_MAX ||
+ (state != RFKILL_STATE_SOFT_BLOCKED &&
+ state != RFKILL_STATE_UNBLOCKED))
+ return -EINVAL;
+
+ mutex_lock(&rfkill_mutex);
+
+ if (!test_and_set_bit(type, rfkill_states_lockdflt)) {
+ rfkill_global_states[type].default_state = state;
+ error = 0;
+ } else
+ error = -EPERM;
+
+ mutex_unlock(&rfkill_mutex);
+ return error;
+}
+EXPORT_SYMBOL_GPL(rfkill_set_default);
+
/*
* Rfkill module initialization/deinitialization.
*/
rfkill_default_state != RFKILL_STATE_UNBLOCKED)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(rfkill_states); i++)
- rfkill_states[i] = rfkill_default_state;
+ for (i = 0; i < RFKILL_TYPE_MAX; i++)
+ rfkill_global_states[i].default_state = rfkill_default_state;
error = class_register(&rfkill_class);
if (error) {
if (!s || tsize != s->tsize || (!tab && tsize > 0))
return ERR_PTR(-EINVAL);
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
list_for_each_entry(stab, &qdisc_stab_list, list) {
if (memcmp(&stab->szopts, s, sizeof(*s)))
if (tsize > 0 && memcmp(stab->data, tab, tsize * sizeof(u16)))
continue;
stab->refcnt++;
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
return stab;
}
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
stab = kmalloc(sizeof(*stab) + tsize * sizeof(u16), GFP_KERNEL);
if (!stab)
if (tsize > 0)
memcpy(stab->data, tab, tsize * sizeof(u16));
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
list_add_tail(&stab->list, &qdisc_stab_list);
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
return stab;
}
if (!tab)
return;
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
if (--tab->refcnt == 0) {
list_del(&tab->list);
kfree(tab);
}
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
}
EXPORT_SYMBOL(qdisc_put_stab);
{
ktime_t time;
+ if (test_bit(__QDISC_STATE_DEACTIVATED,
+ &qdisc_root_sleeping(wd->qdisc)->state))
+ return;
+
wd->qdisc->flags |= TCQ_F_THROTTLED;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_US2NS(expires));
struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
psched_tdiff_t delay = cl->undertime - q->now;
+ if (test_bit(__QDISC_STATE_DEACTIVATED,
+ &qdisc_root_sleeping(cl->qdisc)->state))
+ return;
+
if (!cl->delayed) {
psched_time_t sched = q->now;
ktime_t expires;
/* Initialize the CHUNKS parameter */
auth_chunks->param_hdr.type = SCTP_PARAM_CHUNKS;
+ auth_chunks->param_hdr.length = htons(sizeof(sctp_paramhdr_t));
/* If the Add-IP functionality is enabled, we must
* authenticate, ASCONF and ASCONF-ACK chunks
if (sctp_addip_enable) {
auth_chunks->chunks[0] = SCTP_CID_ASCONF;
auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
- auth_chunks->param_hdr.length =
- htons(sizeof(sctp_paramhdr_t) + 2);
+ auth_chunks->param_hdr.length += htons(2);
}
}
{
struct sctp_authchunk val;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authchunk))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
struct sctp_hmacalgo *hmacs;
int err;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen < sizeof(struct sctp_hmacalgo))
return -EINVAL;
struct sctp_association *asoc;
int ret;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen <= sizeof(struct sctp_authkey))
return -EINVAL;
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
char __user *optval, int __user *optlen)
{
+ struct sctp_hmacalgo __user *p = (void __user *)optval;
struct sctp_hmac_algo_param *hmacs;
- __u16 param_len;
+ __u16 data_len = 0;
+ u32 num_idents;
+
+ if (!sctp_auth_enable)
+ return -EACCES;
hmacs = sctp_sk(sk)->ep->auth_hmacs_list;
- param_len = ntohs(hmacs->param_hdr.length);
+ data_len = ntohs(hmacs->param_hdr.length) - sizeof(sctp_paramhdr_t);
- if (len < param_len)
+ if (len < sizeof(struct sctp_hmacalgo) + data_len)
return -EINVAL;
+
+ len = sizeof(struct sctp_hmacalgo) + data_len;
+ num_idents = data_len / sizeof(u16);
+
if (put_user(len, optlen))
return -EFAULT;
- if (copy_to_user(optval, hmacs->hmac_ids, len))
+ if (put_user(num_idents, &p->shmac_num_idents))
+ return -EFAULT;
+ if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
return -EFAULT;
-
return 0;
}
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (len < sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid)))
else
val.scact_keynumber = sctp_sk(sk)->ep->active_key_id;
+ len = sizeof(struct sctp_authkeyid);
+ if (put_user(len, optlen))
+ return -EFAULT;
+ if (copy_to_user(optval, &val, len))
+ return -EFAULT;
+
return 0;
}
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
- u32 num_chunks;
+ u32 num_chunks = 0;
char __user *to;
- if (len <= sizeof(struct sctp_authchunks))
+ if (!sctp_auth_enable)
+ return -EACCES;
+
+ if (len < sizeof(struct sctp_authchunks))
return -EINVAL;
- if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+ if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
return -EFAULT;
to = p->gauth_chunks;
return -EINVAL;
ch = asoc->peer.peer_chunks;
+ if (!ch)
+ goto num;
/* See if the user provided enough room for all the data */
num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
if (len < num_chunks)
return -EINVAL;
- len = num_chunks;
- if (put_user(len, optlen))
+ if (copy_to_user(to, ch->chunks, num_chunks))
return -EFAULT;
+num:
+ len = sizeof(struct sctp_authchunks) + num_chunks;
+ if (put_user(len, optlen)) return -EFAULT;
if (put_user(num_chunks, &p->gauth_number_of_chunks))
return -EFAULT;
- if (copy_to_user(to, ch->chunks, len))
- return -EFAULT;
-
return 0;
}
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
- u32 num_chunks;
+ u32 num_chunks = 0;
char __user *to;
- if (len <= sizeof(struct sctp_authchunks))
+ if (!sctp_auth_enable)
+ return -EACCES;
+
+ if (len < sizeof(struct sctp_authchunks))
return -EINVAL;
- if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+ if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
return -EFAULT;
to = p->gauth_chunks;
else
ch = sctp_sk(sk)->ep->auth_chunk_list;
+ if (!ch)
+ goto num;
+
num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
- if (len < num_chunks)
+ if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
- len = num_chunks;
+ if (copy_to_user(to, ch->chunks, num_chunks))
+ return -EFAULT;
+num:
+ len = sizeof(struct sctp_authchunks) + num_chunks;
if (put_user(len, optlen))
return -EFAULT;
if (put_user(num_chunks, &p->gauth_number_of_chunks))
return -EFAULT;
- if (copy_to_user(to, ch->chunks, len))
- return -EFAULT;
return 0;
}
void security_fixup_ops(struct security_operations *ops)
{
- set_to_cap_if_null(ops, ptrace);
+ set_to_cap_if_null(ops, ptrace_may_access);
+ set_to_cap_if_null(ops, ptrace_traceme);
set_to_cap_if_null(ops, capget);
set_to_cap_if_null(ops, capset_check);
set_to_cap_if_null(ops, capset_set);
return 0;
}
-int cap_ptrace (struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
- if (!cap_issubset(child->cap_permitted, parent->cap_permitted) &&
- !__capable(parent, CAP_SYS_PTRACE))
- return -EPERM;
- return 0;
+ if (cap_issubset(child->cap_permitted, current->cap_permitted))
+ return 0;
+ if (capable(CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
+}
+
+int cap_ptrace_traceme(struct task_struct *parent)
+{
+ /* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
+ if (cap_issubset(current->cap_permitted, parent->cap_permitted))
+ return 0;
+ if (has_capability(parent, CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
}
int cap_capget (struct task_struct *target, kernel_cap_t *effective,
static inline int cap_safe_nice(struct task_struct *p)
{
if (!cap_issubset(p->cap_permitted, current->cap_permitted) &&
- !__capable(current, CAP_SYS_NICE))
+ !capable(CAP_SYS_NICE))
return -EPERM;
return 0;
}
static struct security_operations rootplug_security_ops = {
/* Use the capability functions for some of the hooks */
- .ptrace = cap_ptrace,
+ .ptrace_may_access = cap_ptrace_may_access,
+ .ptrace_traceme = cap_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
- return security_ops->ptrace(parent, child, mode);
+ return security_ops->ptrace_may_access(child, mode);
+}
+
+int security_ptrace_traceme(struct task_struct *parent)
+{
+ return security_ops->ptrace_traceme(parent);
}
int security_capget(struct task_struct *target,
/* Hook functions begin here. */
-static int selinux_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static int selinux_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
{
int rc;
- rc = secondary_ops->ptrace(parent, child, mode);
+ rc = secondary_ops->ptrace_may_access(child, mode);
if (rc)
return rc;
if (mode == PTRACE_MODE_READ) {
- struct task_security_struct *tsec = parent->security;
+ struct task_security_struct *tsec = current->security;
struct task_security_struct *csec = child->security;
return avc_has_perm(tsec->sid, csec->sid,
SECCLASS_FILE, FILE__READ, NULL);
}
- return task_has_perm(parent, child, PROCESS__PTRACE);
+ return task_has_perm(current, child, PROCESS__PTRACE);
+}
+
+static int selinux_ptrace_traceme(struct task_struct *parent)
+{
+ int rc;
+
+ rc = secondary_ops->ptrace_traceme(parent);
+ if (rc)
+ return rc;
+
+ return task_has_perm(parent, current, PROCESS__PTRACE);
}
static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
static struct security_operations selinux_ops = {
.name = "selinux",
- .ptrace = selinux_ptrace,
+ .ptrace_may_access = selinux_ptrace_may_access,
+ .ptrace_traceme = selinux_ptrace_traceme,
.capget = selinux_capget,
.capset_check = selinux_capset_check,
.capset_set = selinux_capset_set,
*/
/**
- * smack_ptrace - Smack approval on ptrace
- * @ptp: parent task pointer
+ * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
* @ctp: child task pointer
*
* Returns 0 if access is OK, an error code otherwise
*
* Do the capability checks, and require read and write.
*/
-static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp,
- unsigned int mode)
+static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
{
int rc;
- rc = cap_ptrace(ptp, ctp, mode);
+ rc = cap_ptrace_may_access(ctp, mode);
if (rc != 0)
return rc;
- rc = smk_access(ptp->security, ctp->security, MAY_READWRITE);
- if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE))
+ rc = smk_access(current->security, ctp->security, MAY_READWRITE);
+ if (rc != 0 && capable(CAP_MAC_OVERRIDE))
return 0;
+ return rc;
+}
+
+/**
+ * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME
+ * @ptp: parent task pointer
+ *
+ * Returns 0 if access is OK, an error code otherwise
+ *
+ * Do the capability checks, and require read and write.
+ */
+static int smack_ptrace_traceme(struct task_struct *ptp)
+{
+ int rc;
+
+ rc = cap_ptrace_traceme(ptp);
+ if (rc != 0)
+ return rc;
+ rc = smk_access(ptp->security, current->security, MAY_READWRITE);
+ if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
+ return 0;
return rc;
}
*/
file = container_of(fown, struct file, f_owner);
rc = smk_access(file->f_security, tsk->security, MAY_WRITE);
- if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE))
+ if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
return 0;
return rc;
}
* account for the smack labels having gotten to
* be different in the first place.
*
- * This breaks the strict subjet/object access
+ * This breaks the strict subject/object access
* control ideal, taking the object's privilege
* state into account in the decision as well as
* the smack value.
*/
- if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE))
+ if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
return 0;
return rc;
{
char *newsmack;
- if (!__capable(p, CAP_MAC_ADMIN))
- return -EPERM;
-
/*
* Changing another process' Smack value is too dangerous
* and supports no sane use case.
if (p != current)
return -EPERM;
+ if (!capable(CAP_MAC_ADMIN))
+ return -EPERM;
+
if (value == NULL || size == 0 || size >= SMK_LABELLEN)
return -EINVAL;
struct security_operations smack_ops = {
.name = "smack",
- .ptrace = smack_ptrace,
+ .ptrace_may_access = smack_ptrace_may_access,
+ .ptrace_traceme = smack_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
* all processes and objects when they are created.
*/
security_initcall(smack_init);
-
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
}
}
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ int c;
+
+ for (c = 0; c < spec->num_adc_nids; c++) {
+ hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+ hda_nid_t nid = spec->capsrc_nids[c];
+ int conns, mute, idx, item;
+
+ conns = snd_hda_get_connections(codec, nid, conn_list,
+ ARRAY_SIZE(conn_list));
+ if (conns < 0)
+ continue;
+ for (idx = 0; idx < conns; idx++) {
+ /* if the current connection is the selected one,
+ * unmute it as default - otherwise mute it
+ */
+ mute = AMP_IN_MUTE(idx);
+ for (item = 0; item < imux->num_items; item++) {
+ if (imux->items[item].index == idx) {
+ if (spec->cur_mux[c] == item)
+ mute = AMP_IN_UNMUTE(idx);
+ break;
+ }
+ }
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, mute);
+ }
+ }
+}
+
/* add mic boosts if needed */
static int alc_auto_add_mic_boost(struct hda_codec *codec)
{
alc882_auto_init_multi_out(codec);
alc882_auto_init_hp_out(codec);
alc882_auto_init_analog_input(codec);
+ alc882_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc883_auto_init_input_src alc882_auto_init_input_src
+
/* almost identical with ALC880 parser... */
static int alc883_parse_auto_config(struct hda_codec *codec)
{
alc883_auto_init_multi_out(codec);
alc883_auto_init_hp_out(codec);
alc883_auto_init_analog_input(codec);
+ alc883_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
#define alc262_auto_init_multi_out alc882_auto_init_multi_out
#define alc262_auto_init_hp_out alc882_auto_init_hp_out
#define alc262_auto_init_analog_input alc882_auto_init_analog_input
+#define alc262_auto_init_input_src alc882_auto_init_input_src
/* init callback for auto-configuration model -- overriding the default init */
alc262_auto_init_multi_out(codec);
alc262_auto_init_hp_out(codec);
alc262_auto_init_analog_input(codec);
+ alc262_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc861vd_auto_init_input_src alc882_auto_init_input_src
+
#define alc861vd_idx_to_mixer_vol(nid) ((nid) + 0x02)
#define alc861vd_idx_to_mixer_switch(nid) ((nid) + 0x0c)
alc861vd_auto_init_multi_out(codec);
alc861vd_auto_init_hp_out(codec);
alc861vd_auto_init_analog_input(codec);
+ alc861vd_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc662_auto_init_input_src alc882_auto_init_input_src
+
static int alc662_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
alc662_auto_init_multi_out(codec);
alc662_auto_init_hp_out(codec);
alc662_auto_init_analog_input(codec);
+ alc662_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
*/
/*
- * Xonar DX
- * --------
+ * Xonar D1/DX
+ * -----------
*
* CMI8788:
*
* I²C <-> CS4398 (front)
* <-> CS4362A (surround, center/LFE, back)
*
- * GPI 0 <- external power present
+ * GPI 0 <- external power present (DX only)
*
* GPIO 0 -> enable output to speakers
* GPIO 1 -> enable front panel I/O
enum {
MODEL_D2,
MODEL_D2X,
+ MODEL_D1,
MODEL_DX,
};
{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
+ { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
{ }
};
MODULE_DEVICE_TABLE(pci, xonar_ids);
cs4362a_write(chip, 0x01, CS4362A_CPEN);
}
-static void xonar_dx_init(struct oxygen *chip)
+static void xonar_d1_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 800;
data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
- data->ext_power_reg = OXYGEN_GPI_DATA;
- data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
- data->ext_power_bit = GPI_DX_EXT_POWER;
data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
data->cs4362a_fm = CS4362A_FM_SINGLE |
CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
snd_component_add(chip->card, "CS5361");
}
+static void xonar_dx_init(struct oxygen *chip)
+{
+ struct xonar_data *data = chip->model_data;
+
+ data->ext_power_reg = OXYGEN_GPI_DATA;
+ data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+ data->ext_power_bit = GPI_DX_EXT_POWER;
+ xonar_d1_init(chip);
+}
+
static void xonar_cleanup(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
}
-static void xonar_dx_cleanup(struct oxygen *chip)
+static void xonar_d1_cleanup(struct oxygen *chip)
{
xonar_cleanup(chip);
cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
xonar_enable_output(chip);
}
-static void xonar_dx_resume(struct oxygen *chip)
+static void xonar_d1_resume(struct oxygen *chip)
{
cs43xx_init(chip);
xonar_enable_output(chip);
.put = front_panel_put,
};
-static void xonar_dx_ac97_switch(struct oxygen *chip,
+static void xonar_d1_ac97_switch(struct oxygen *chip,
unsigned int reg, unsigned int mute)
{
if (reg == AC97_LINE) {
return 0;
}
-static int xonar_dx_control_filter(struct snd_kcontrol_new *template)
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
{
if (!strncmp(template->name, "CD Capture ", 11))
return 1; /* no CD input */
return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
}
-static int xonar_dx_mixer_init(struct oxygen *chip)
+static int xonar_d1_mixer_init(struct oxygen *chip)
{
return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
}
.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
},
+ [MODEL_D1] = {
+ .shortname = "Xonar D1",
+ .longname = "Asus Virtuoso 100",
+ .chip = "AV200",
+ .owner = THIS_MODULE,
+ .init = xonar_d1_init,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
+ .set_dac_params = set_cs43xx_params,
+ .set_adc_params = set_cs53x1_params,
+ .update_dac_volume = update_cs43xx_volume,
+ .update_dac_mute = update_cs43xx_mute,
+ .ac97_switch = xonar_d1_ac97_switch,
+ .dac_tlv = cs4362a_db_scale,
+ .model_data_size = sizeof(struct xonar_data),
+ .pcm_dev_cfg = PLAYBACK_0_TO_I2S |
+ PLAYBACK_1_TO_SPDIF |
+ CAPTURE_0_FROM_I2S_2,
+ .dac_channels = 8,
+ .dac_volume_min = 0,
+ .dac_volume_max = 127,
+ .function_flags = OXYGEN_FUNCTION_2WIRE,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ },
[MODEL_DX] = {
.shortname = "Xonar DX",
.longname = "Asus Virtuoso 100",
.chip = "AV200",
.owner = THIS_MODULE,
.init = xonar_dx_init,
- .control_filter = xonar_dx_control_filter,
- .mixer_init = xonar_dx_mixer_init,
- .cleanup = xonar_dx_cleanup,
- .suspend = xonar_dx_cleanup,
- .resume = xonar_dx_resume,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
.set_dac_params = set_cs43xx_params,
.set_adc_params = set_cs53x1_params,
.update_dac_volume = update_cs43xx_volume,
.update_dac_mute = update_cs43xx_mute,
.gpio_changed = xonar_gpio_changed,
- .ac97_switch = xonar_dx_ac97_switch,
+ .ac97_switch = xonar_d1_ac97_switch,
.dac_tlv = cs4362a_db_scale,
.model_data_size = sizeof(struct xonar_data),
.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
0x0003, /* R35 - ClassD1 */
0x0000, /* R36 */
0x0100, /* R37 - ClassD3 */
- 0x0000, /* R38 */
+ 0x0079, /* R38 - ClassD4 */
0x0000, /* R39 - Input Mixer1 */
0x0000, /* R40 - Input Mixer2 */
0x0000, /* R41 - Input Mixer3 */
WM8990_CDMODE_BIT, 1, 0),
SOC_SINGLE("Speaker Output Attenuation Volume", WM8990_SPEAKER_VOLUME,
- WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0),
+ WM8990_SPKATTN_SHIFT, WM8990_SPKATTN_MASK, 0),
SOC_SINGLE("Speaker DC Boost Volume", WM8990_CLASSD3,
WM8990_DCGAIN_SHIFT, WM8990_DCGAIN_MASK, 0),
SOC_SINGLE("Speaker AC Boost Volume", WM8990_CLASSD3,
WM8990_ACGAIN_SHIFT, WM8990_ACGAIN_MASK, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM8990_CLASSD4,
+ WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0, out_pga_tlv),
+SOC_SINGLE("Speaker ZC Switch", WM8990_CLASSD4,
+ WM8990_SPKZC_SHIFT, WM8990_SPKZC_MASK, 0),
SOC_WM899X_OUTPGA_SINGLE_R_TLV("Left DAC Digital Volume",
WM8990_LEFT_DAC_DIGITAL_VOLUME,
{"SPKMIX", "SPKMIX Left Mixer PGA Switch", "LOPGA"},
{"SPKMIX", "SPKMIX Right Mixer PGA Switch", "ROPGA"},
{"SPKMIX", "SPKMIX Right DAC Switch", "Right DAC"},
- {"SPKMIX", "SPKMIX Left DAC Switch", "Right DAC"},
+ {"SPKMIX", "SPKMIX Left DAC Switch", "Left DAC"},
/* LONMIX */
{"LONMIX", "LONMIX Left Mixer PGA Switch", "LOPGA"},
#define WM8990_SPEAKER_VOLUME 0x22
#define WM8990_CLASSD1 0x23
#define WM8990_CLASSD3 0x25
+#define WM8990_CLASSD4 0x26
#define WM8990_INPUT_MIXER1 0x27
#define WM8990_INPUT_MIXER2 0x28
#define WM8990_INPUT_MIXER3 0x29
/*
* R34 (0x22) - Speaker Volume
*/
-#define WM8990_SPKVOL_MASK 0x0003 /* SPKVOL - [1:0] */
-#define WM8990_SPKVOL_SHIFT 0
+#define WM8990_SPKATTN_MASK 0x0003 /* SPKATTN - [1:0] */
+#define WM8990_SPKATTN_SHIFT 0
/*
* R35 (0x23) - ClassD1
#define WM8990_DCGAIN_SHIFT 3
#define WM8990_ACGAIN_MASK 0x0007 /* ACGAIN - [2:0] */
#define WM8990_ACGAIN_SHIFT 0
+
+/*
+ * R38 (0x26) - ClassD4
+ */
+#define WM8990_SPKZC_MASK 0x0001 /* SPKZC */
+#define WM8990_SPKZC_SHIFT 7 /* SPKZC */
+#define WM8990_SPKVOL_MASK 0x007F /* SPKVOL - [6:0] */
+#define WM8990_SPKVOL_SHIFT 0 /* SPKVOL - [6:0] */
+
/*
* R39 (0x27) - Input Mixer1
*/