]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
[media] em28xx: initial support for HAUPPAUGE HVR-930C again
authorEddi De Pieri <eddi@depieri.net>
Sat, 19 Nov 2011 14:37:14 +0000 (11:37 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sun, 20 Nov 2011 13:24:20 +0000 (11:24 -0200)
With this patch I try again to add initial support for HVR930C.

Tested only DVB-T, since in Italy Analog service is stopped.

Actually "scan -a0 -f1", find only about 50 channel while 400 should
be available.

[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/common/tuners/xc5000.c
drivers/media/dvb/frontends/drxk.h
drivers/media/dvb/frontends/drxk_hard.c
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-dvb.c
drivers/media/video/em28xx/em28xx.h

index ecd1f95726e22191a1ac58ffb42fa01b9dec4bcb..048f48944aa15de22451cb4c73526a052b2e5e84 100644 (file)
@@ -1004,6 +1004,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
        struct xc5000_priv *priv = fe->tuner_priv;
        int ret = 0;
 
+       mutex_lock(&xc5000_list_mutex);
+
        if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
                ret = xc5000_fwupload(fe);
                if (ret != XC_RESULT_SUCCESS)
@@ -1023,6 +1025,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
        /* Default to "CABLE" mode */
        ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
 
+       mutex_unlock(&xc5000_list_mutex);
+
        return ret;
 }
 
index 58baf419560cedb55f11ca5b788cbcd9eff77069..e6d42e271b8912c8bbce1ecb23a2bfa4bf88892f 100644 (file)
@@ -26,6 +26,8 @@ struct drxk_config {
        bool    antenna_dvbt;
        u16     antenna_gpio;
 
+       int    chunk_size;
+
        const char *microcode_name;
 };
 
index dc13fd86c4f5ce7b4a1cdd43416e288756b48fdd..2392092eb5bcf897703e122fc0fe5a6ff43af636 100644 (file)
@@ -681,7 +681,8 @@ static int init_state(struct drxk_state *state)
        state->m_hasOOB = false;
        state->m_hasAudio = false;
 
-       state->m_ChunkSize = 124;
+       if (!state->m_ChunkSize)
+           state->m_ChunkSize = 124;
 
        state->m_oscClockFreq = 0;
        state->m_smartAntInverted = false;
@@ -6430,6 +6431,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config,
        state->no_i2c_bridge = config->no_i2c_bridge;
        state->antenna_gpio = config->antenna_gpio;
        state->antenna_dvbt = config->antenna_dvbt;
+       state->m_ChunkSize = config->chunk_size;
 
        /* NOTE: as more UIO bits will be used, add them to the mask */
        state->UIO_mask = config->antenna_gpio;
index 19a5be370817ec42162f93f0f2532c8a52725923..705aedfafaec01071144391888d94839f71fbf6c 100644 (file)
@@ -336,6 +336,24 @@ static struct em28xx_reg_seq pctv_460e[] = {
        {             -1,   -1,   -1,  -1},
 };
 
+static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
+// xc5000 reset
+       {EM2874_R80_GPIO,       0x6f,   0xff,   10},
+       {EM2874_R80_GPIO,       0x4f,   0xff,   10},
+       {EM2874_R80_GPIO,       0x6f,   0xff,   10},
+       {EM2874_R80_GPIO,       0x4f,   0xff,   10},
+       { -1,                   -1,     -1,     -1},
+};
+
+#if 0
+static struct em28xx_reg_seq hauppauge_930c_digital[] = {
+       {EM2874_R80_GPIO,       0xf6,   0xff,   10},
+       {EM2874_R80_GPIO,       0xe6,   0xff,   100},
+       {EM2874_R80_GPIO,       0xa6,   0xff,   10},
+       { -1,                   -1,     -1,     -1},
+};
+#endif
+
 /*
  *  Board definitions
  */
@@ -892,6 +910,19 @@ struct em28xx_board em28xx_boards[] = {
                                EM28XX_I2C_CLK_WAIT_ENABLE |
                                EM28XX_I2C_FREQ_400_KHZ,
        },
+       [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
+               .name         = "Hauppauge WinTV HVR 930C",
+               .has_dvb      = 1,
+//#if 0
+//             .tuner_type   = TUNER_XC5000,
+//             .tuner_addr   = 0x41,
+//             .dvb_gpio     = hauppauge_930c_digital, /* FIXME: probably wrong */
+               .tuner_gpio   = hauppauge_930c_gpio,
+//#endif
+               .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
+                               EM28XX_I2C_CLK_WAIT_ENABLE |
+                               EM28XX_I2C_FREQ_400_KHZ,
+       },
        [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
                .name         = "Hauppauge WinTV HVR 900",
                .tda9887_conf = TDA9887_PRESENT,
@@ -1975,6 +2006,8 @@ struct usb_device_id em28xx_id_table[] = {
                        .driver_info = EM28174_BOARD_PCTV_290E },
        { USB_DEVICE(0x2013, 0x024c),
                        .driver_info = EM28174_BOARD_PCTV_460E },
+       { USB_DEVICE(0x2040, 0x1605),
+                       .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
        { },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -2028,10 +2061,10 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
        int rc = 0;
        struct em28xx *dev = ptr;
 
-       if (dev->tuner_type != TUNER_XC2028)
+       if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
                return 0;
 
-       if (command != XC2028_TUNER_RESET)
+       if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
                return 0;
 
        rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
index cef7a2d409cbc27c53c2aabe805528d62f40b894..d19939b04ec303cefb7646ebab59a3f615e53a41 100644 (file)
@@ -316,6 +316,14 @@ struct drxk_config terratec_h5_drxk = {
        .microcode_name = "dvb-usb-terratec-h5-drxk.fw",
 };
 
+struct drxk_config hauppauge_930c_drxk = {
+       .adr = 0x29,
+       .single_master = 1,
+       .no_i2c_bridge = 1,
+       .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw",
+       .chunk_size = 56,
+};
+
 static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
 {
        struct em28xx_dvb *dvb = fe->sec_priv;
@@ -334,6 +342,90 @@ static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
        return status;
 }
 
+static void hauppauge_hvr930c_init(struct em28xx *dev)
+{
+       int i;
+
+       struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
+               {EM2874_R80_GPIO,       0xff,   0xff,   101},  //11111111
+//             {0xd            ,       0xff,   0xff,   101},  //11111111
+               {EM2874_R80_GPIO,       0xfb,   0xff,   50},   //11111011  init bit 3
+               {EM2874_R80_GPIO,       0xff,   0xff,   184},  //11111111
+               { -1,                   -1,     -1,     -1},
+       };
+       struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
+               {EM2874_R80_GPIO,       0xef,   0xff,   1},    //11101111
+               {EM2874_R80_GPIO,       0xaf,   0xff,   101},  //10101111  init bit 7
+               {EM2874_R80_GPIO,       0xef,   0xff,   118},   //11101111
+
+
+//per il tuner?
+               {EM2874_R80_GPIO,       0xef,   0xff,   1},  //11101111
+               {EM2874_R80_GPIO,       0xcf,   0xff,   11},    //11001111  init bit 6
+               {EM2874_R80_GPIO,       0xef,   0xff,   64},  //11101111
+
+               {EM2874_R80_GPIO,       0xcf,   0xff,   101},  //11001111  init bit 6
+               {EM2874_R80_GPIO,       0xef,   0xff,   101},  //11101111
+               {EM2874_R80_GPIO,       0xcf,   0xff,   11},  //11001111  init bit 6
+               {EM2874_R80_GPIO,       0xef,   0xff,   101},  //11101111
+
+//             {EM2874_R80_GPIO,       0x6f,   0xff,   10},    //01101111
+//             {EM2874_R80_GPIO,       0x6d,   0xff,   100},  //01101101  init bit 2
+               { -1,                   -1,     -1,     -1},
+       };
+
+       struct em28xx_reg_seq hauppauge_hvr930c_end2[] = {
+//             {EM2874_R80_GPIO,       0x6f,   0xff,   124},  //01101111
+//             {EM2874_R80_GPIO,       0x4f,   0xff,   11},   //01001111  init bit 6
+//             {EM2874_R80_GPIO,       0x6f,   0xff,   1},    //01101111
+//             {EM2874_R80_GPIO,       0x4f,   0xff,   10},   //01001111  init bit 6
+//             {EM2874_R80_GPIO,       0x6f,   0xff,   100},  //01101111
+//             {0xd            ,       0x42,   0xff,   101},  //11111111
+               { -1,                   -1,     -1,     -1},
+       };
+       struct {
+               unsigned char r[4];
+               int len;
+       } regs[] = {
+               {{ 0x06, 0x02, 0x00, 0x31 }, 4},
+               {{ 0x01, 0x02 }, 2},
+               {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
+               {{ 0x01, 0x00 }, 2},
+               {{ 0x01, 0x00, 0xff, 0xaf }, 4},
+               {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
+               {{ 0x01, 0x00 }, 2},
+               {{ 0x01, 0x00, 0x73, 0xaf }, 4},
+               {{ 0x04, 0x00 }, 2},
+               {{ 0x00, 0x04 }, 2},
+               {{ 0x00, 0x04, 0x00, 0x0a }, 4},
+               {{ 0x04, 0x14 }, 2},
+               {{ 0x04, 0x14, 0x00, 0x00 }, 4},
+       };
+
+       em28xx_gpio_set(dev, hauppauge_hvr930c_init);
+       em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+       msleep(10);
+       em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
+       msleep(10);
+
+       dev->i2c_client.addr = 0x82 >> 1;
+
+       for (i = 0; i < ARRAY_SIZE(regs); i++)
+               i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+       em28xx_gpio_set(dev, hauppauge_hvr930c_end);
+
+       msleep(100);
+
+       em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
+       msleep(30);
+
+       em28xx_gpio_set(dev, hauppauge_hvr930c_end2);
+       msleep(10);
+       em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
+       msleep(10);
+
+}
+
 static void terratec_h5_init(struct em28xx *dev)
 {
        int i;
@@ -787,6 +879,47 @@ static int em28xx_dvb_init(struct em28xx *dev)
 
                        mfe_shared = 1;
                }
+               break;
+       case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
+               hauppauge_hvr930c_init(dev);
+
+               dvb->dont_attach_fe1 = 1;
+
+               dvb->fe[0] = dvb_attach(drxk_attach, &hauppauge_930c_drxk, &dev->i2c_adap, &dvb->fe[1]);
+               if (!dvb->fe[0]) {
+                       result = -EINVAL;
+                       goto out_free;
+               }
+               /* FIXME: do we need a pll semaphore? */
+               dvb->fe[0]->sec_priv = dvb;
+               sema_init(&dvb->pll_mutex, 1);
+               dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
+               dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+               dvb->fe[1]->id = 1;
+
+               /* Attach xc5000 */
+               struct xc5000_config cfg;
+               memset(&cfg, 0, sizeof(cfg));
+               cfg.i2c_address  = 0x61;
+               //cfg.if_khz = 4570; //FIXME
+               cfg.if_khz = 4000; //FIXME (should be ok) read from i2c traffic
+
+               if (dvb->fe[0]->ops.i2c_gate_ctrl)
+                       dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
+               if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap, &cfg)) {
+                       result = -EINVAL;
+                       goto out_free;
+               }
+
+               if (dvb->fe[0]->ops.i2c_gate_ctrl)
+                       dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
+
+               /* Hack - needed by drxk/tda18271c2dd */
+               dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv;
+               memcpy(&dvb->fe[1]->ops.tuner_ops,
+                      &dvb->fe[0]->ops.tuner_ops,
+                      sizeof(dvb->fe[0]->ops.tuner_ops));
+
                break;
        case EM2884_BOARD_TERRATEC_H5:
                terratec_h5_init(dev);
@@ -798,7 +931,6 @@ static int em28xx_dvb_init(struct em28xx *dev)
                        result = -EINVAL;
                        goto out_free;
                }
-
                /* FIXME: do we need a pll semaphore? */
                dvb->fe[0]->sec_priv = dvb;
                sema_init(&dvb->pll_mutex, 1);
@@ -845,6 +977,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
        }
        /* define general-purpose callback pointer */
        dvb->fe[0]->callback = em28xx_tuner_callback;
+       if (dvb->fe[1])
+           dvb->fe[1]->callback = em28xx_tuner_callback;
 
        /* register everything */
        result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
index 2a2cb7ed0014fcda319a31c60066c3ebbfa12f9f..c16ae8f95642bd16f67418d3dd783641b5f335aa 100644 (file)
@@ -38,6 +38,7 @@
 #include <media/videobuf-dvb.h>
 #endif
 #include "tuner-xc2028.h"
+#include "xc5000.h"
 #include "em28xx-reg.h"
 
 /* Boards supported by driver */
 #define EM28174_BOARD_PCTV_290E                   78
 #define EM2884_BOARD_TERRATEC_H5                 79
 #define EM28174_BOARD_PCTV_460E                   80
+#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C    81
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4