mtd: cfi_probe: enter Auto Select Mode after filling cfi->cfiq members

Move the code to enter Auto Select Mode down to be able to use cfi->cfiq
members to add support for chips using alternative sequence / unlock
addresses.

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index e63e6749429a29c282323ebc7c5d5949ef284616..f657d16cb98c1f06b3f4efbb8877191531a05cb9 100644 (file)
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -181,29 +181,6 @@ static int __xipram cfi_chip_setup(struct map_info *map,
        for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
                ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
 
-       /* Note we put the device back into Read Mode BEFORE going into Auto
-        * Select Mode, as some devices support nesting of modes, others
-        * don't. This way should always work.
-        * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
-        * so should be treated as nops or illegal (and so put the device
-        * back into Read Mode, which is a nop in this case).
-        */
-       cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
-       cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
-       cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
-       cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
-       cfi->mfr = cfi_read_query16(map, base);
-       cfi->id = cfi_read_query16(map, base + ofs_factor);
-
-       /* Get AMD/Spansion extended JEDEC ID */
-       if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e)
-               cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 |
-                         cfi_read_query(map, base + 0xf * ofs_factor);
-
-       /* Put it back into Read Mode */
-       cfi_qry_mode_off(base, map, cfi);
-       xip_allowed(base, map);
-
        /* Do any necessary byteswapping */
        cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
 
@@ -228,6 +205,30 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 #endif
        }
 
+       /*
+        * Note we put the device back into Read Mode BEFORE going into Auto
+        * Select Mode, as some devices support nesting of modes, others
+        * don't. This way should always work.
+        * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
+        * so should be treated as nops or illegal (and so put the device
+        * back into Read Mode, which is a nop in this case).
+        */
+       cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
+       cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
+       cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
+       cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
+       cfi->mfr = cfi_read_query16(map, base);
+       cfi->id = cfi_read_query16(map, base + ofs_factor);
+
+       /* Get AMD/Spansion extended JEDEC ID */
+       if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e)
+               cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 |
+                         cfi_read_query(map, base + 0xf * ofs_factor);
+
+       /* Put it back into Read Mode */
+       cfi_qry_mode_off(base, map, cfi);
+       xip_allowed(base, map);
+
        printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
               map->name, cfi->interleave, cfi->device_type*8, base,
               map->bankwidth*8);