ARM: ux500: register the tc35892 GPIO on the TVK UIB

The TVK1281618 UIB has a TC35892 GPIO expander on it, which has
in the past probably been confused with the GPIO expander on the
older HREF plus previous to v60, which is on an entirely different
part of the system with another I2C address. Register the expander
in the right place.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 89e1485a38509916669b3686edab6b7761982446..76d3ef13175f4d40ff9fb4ef3cbe0e8a287504ce 100644 (file)
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -16,5 +16,26 @@
 / {
        soc {
                /* Add Synaptics touch screen, TC35892 keypad etc here */
+               i2c@80004000 {
+                       tc3589x@44 {
+                               compatible = "tc3589x";
+                               reg = <0x44>;
+                               interrupt-parent = <&gpio6>;
+                               interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+
+                               tc3589x_gpio {
+                                       compatible = "tc3589x-gpio";
+                                       interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       gpio-controller;
+                                       #gpio-cells = <2>;
+                               };
+                       };
+               };
        };
 };