hw->mac.autotry_restart = true;
err = hw->mac.ops.setup_link(hw, advertised, true, true);
if (err) {
- DPRINTK(PROBE, INFO,
- "setup link failed with code %d\n", err);
+ e_info("setup link failed with code %d\n", err);
hw->mac.ops.setup_link(hw, old, true, true);
}
} else {
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (_test[pat] & W & M)) { \
- DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\
- "0x%08X expected 0x%08X\n", \
- R, val, (_test[pat] & W & M)); \
+ e_err("pattern test reg %04X failed: got " \
+ "0x%08X expected 0x%08X\n", \
+ R, val, (_test[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
- DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
- "expected 0x%08X\n", R, (val & M), (W & M)); \
+ e_err("set/check reg %04X test failed: got 0x%08X " \
+ "expected 0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
if (value != after) {
- DPRINTK(DRV, ERR, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
+ e_err("failed STATUS register test got: 0x%08X expected: "
+ "0x%08X\n", after, value);
*data = 1;
return 1;
}
*data = 1;
return -1;
}
- DPRINTK(HW, INFO, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
+ e_info("testing %s interrupt\n", shared_int ?
+ "shared" : "unshared");
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
- DPRINTK(HW, INFO, "offline testing starting\n");
+ e_info("offline testing starting\n");
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
else
ixgbe_reset(adapter);
- DPRINTK(HW, INFO, "register testing starting\n");
+ e_info("register testing starting\n");
if (ixgbe_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
- DPRINTK(HW, INFO, "eeprom testing starting\n");
+ e_info("eeprom testing starting\n");
if (ixgbe_eeprom_test(adapter, &data[1]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
- DPRINTK(HW, INFO, "interrupt testing starting\n");
+ e_info("interrupt testing starting\n");
if (ixgbe_intr_test(adapter, &data[2]))
eth_test->flags |= ETH_TEST_FL_FAILED;
* loopback diagnostic. */
if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
IXGBE_FLAG_VMDQ_ENABLED)) {
- DPRINTK(HW, INFO, "Skip MAC loopback diagnostic in VT "
- "mode\n");
+ e_info("Skip MAC loopback diagnostic in VT mode\n");
data[3] = 0;
goto skip_loopback;
}
ixgbe_reset(adapter);
- DPRINTK(HW, INFO, "loopback testing starting\n");
+ e_info("loopback testing starting\n");
if (ixgbe_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
if (if_running)
dev_open(netdev);
} else {
- DPRINTK(HW, INFO, "online testing starting\n");
+ e_info("online testing starting\n");
/* Online tests */
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
adapter->netdev->features |= NETIF_F_LRO;
- DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
- ec->rx_coalesce_usecs);
+ e_info("rx-usecs set to %d, re-enabling RSC\n",
+ ec->rx_coalesce_usecs);
return true;
}
return false;
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
netdev->features &= ~NETIF_F_LRO;
- DPRINTK(PROBE, INFO,
- "rx-usecs set to 0, disabling RSC\n");
+ e_info("rx-usecs set to 0, disabling RSC\n");
need_reset = true;
}
/* detected Tx unit hang */
union ixgbe_adv_tx_desc *tx_desc;
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
- " Tx Queue <%d>\n"
- " TDH, TDT <%x>, <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "tx_buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " jiffies <%lx>\n",
- tx_ring->queue_index,
- IXGBE_READ_REG(hw, tx_ring->head),
- IXGBE_READ_REG(hw, tx_ring->tail),
- tx_ring->next_to_use, eop,
- tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+ e_err("Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH, TDT <%x>, <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "tx_buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " jiffies <%lx>\n",
+ tx_ring->queue_index,
+ IXGBE_READ_REG(hw, tx_ring->head),
+ IXGBE_READ_REG(hw, tx_ring->tail),
+ tx_ring->next_to_use, eop,
+ tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
return true;
}
if (adapter->detect_tx_hung) {
if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
/* schedule immediate reset if we believe we hung */
- DPRINTK(PROBE, INFO,
- "tx hang %d detected, resetting adapter\n",
- adapter->tx_timeout_count + 1);
+ e_info("tx hang %d detected, resetting adapter\n",
+ adapter->tx_timeout_count + 1);
ixgbe_tx_timeout(adapter->netdev);
}
}
return;
break;
}
- DPRINTK(DRV, ERR, "Network adapter has been stopped because it "
- "has over heated. Restart the computer. If the problem "
- "persists, power off the system and replace the "
- "adapter\n");
+ e_crit("Network adapter has been stopped because it "
+ "has over heated. Restart the computer. If the problem "
+ "persists, power off the system and replace the "
+ "adapter\n");
/* write to clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
}
if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
(eicr & IXGBE_EICR_GPI_SDP1)) {
- DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n");
+ e_crit("Fan has stopped, replace the adapter\n");
/* write to clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
}
handler, 0, adapter->name[vector],
adapter->q_vector[vector]);
if (err) {
- DPRINTK(PROBE, ERR,
- "request_irq failed for MSIX interrupt "
- "Error: %d\n", err);
+ e_err("request_irq failed for MSIX interrupt: "
+ "Error: %d\n", err);
goto free_queue_irqs;
}
}
err = request_irq(adapter->msix_entries[vector].vector,
ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
if (err) {
- DPRINTK(PROBE, ERR,
- "request_irq for msix_lsc failed: %d\n", err);
+ e_err("request_irq for msix_lsc failed: %d\n", err);
goto free_queue_irqs;
}
}
if (err)
- DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
+ e_err("request_irq failed, Error %d\n", err);
return err;
}
map_vector_to_rxq(adapter, 0, 0);
map_vector_to_txq(adapter, 0, 0);
- DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
+ e_info("Legacy interrupt IVAR setup done\n");
}
/**
msleep(1);
}
if (k >= IXGBE_MAX_RX_DESC_POLL) {
- DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
- "not set within the polling period\n", rxr);
+ e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+ "the polling period\n", rxr);
}
ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
(adapter->rx_ring[rxr]->count - 1));
} while (--wait_loop &&
!(txdctl & IXGBE_TXDCTL_ENABLE));
if (!wait_loop)
- DPRINTK(DRV, ERR, "Could not enable "
- "Tx Queue %d\n", j);
+ e_err("Could not enable Tx Queue %d\n", j);
}
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- DPRINTK(DRV, CRIT,
- "Fan has stopped, replace the adapter\n");
+ e_crit("Fan has stopped, replace the adapter\n");
}
/*
} else {
err = ixgbe_non_sfp_link_config(hw);
if (err)
- DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
+ e_err("link_config FAILED %d\n", err);
}
for (i = 0; i < adapter->num_tx_queues; i++)
case IXGBE_ERR_SFP_NOT_PRESENT:
break;
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
- dev_err(&adapter->pdev->dev, "master disable timed out\n");
+ e_dev_err("master disable timed out\n");
break;
case IXGBE_ERR_EEPROM_VERSION:
/* We are running on a pre-production device, log a warning */
- dev_warn(&adapter->pdev->dev, "This device is a pre-production "
- "adapter/LOM. Please be aware there may be issues "
- "associated with your hardware. If you are "
- "experiencing problems please contact your Intel or "
- "hardware representative who provided you with this "
- "hardware.\n");
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issuesassociated with "
+ "your hardware. If you are experiencing problems "
+ "please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
break;
default:
- dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+ e_dev_err("Hardware Error: %d\n", err);
}
/* reprogram the RAR[0] in case user changed it. */
adapter->num_tx_queues = 1;
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- DPRINTK(PROBE, INFO, "FCoE enabled with DCB\n");
+ e_info("FCoE enabled with DCB\n");
ixgbe_set_dcb_queues(adapter);
}
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- DPRINTK(PROBE, INFO, "FCoE enabled with RSS\n");
+ e_info("FCoE enabled with RSS\n");
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
ixgbe_set_fdir_queues(adapter);
* This just means we'll go with either a single MSI
* vector or fall back to legacy interrupts.
*/
- DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI-X interrupts\n");
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
kfree(adapter->msix_entries);
adapter->msix_entries = NULL;
if (!err) {
adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
} else {
- DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
- "falling back to legacy. Error: %d\n", err);
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI interrupt, "
+ "falling back to legacy. Error: %d\n", err);
/* reset err */
err = 0;
}
err = ixgbe_set_interrupt_capability(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
+ e_dev_err("Unable to setup interrupt capabilities\n");
goto err_set_interrupt;
}
err = ixgbe_alloc_q_vectors(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
- "vectors\n");
+ e_dev_err("Unable to allocate memory for queue vectors\n");
goto err_alloc_q_vectors;
}
err = ixgbe_alloc_queues(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ e_dev_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
- DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
- "Tx Queue count = %u\n",
- (adapter->num_rx_queues > 1) ? "Enabled" :
- "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+ e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+ (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+ adapter->num_rx_queues, adapter->num_tx_queues);
set_bit(__IXGBE_DOWN, &adapter->state);
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize "
- "because an unsupported SFP+ module type "
- "was detected.\n"
- "Reload the driver after installing a "
- "supported module.\n");
+ e_dev_err("failed to initialize because an unsupported "
+ "SFP+ module type was detected.\n");
+ e_dev_err("Reload the driver after installing a "
+ "supported module.\n");
unregister_netdev(adapter->netdev);
} else {
- DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
- hw->phy.sfp_type);
+ e_info("detected SFP+: %d\n", hw->phy.sfp_type);
}
/* don't need this routine any more */
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
/* initialize eeprom parameters */
if (ixgbe_init_eeprom_params_generic(hw)) {
- dev_err(&pdev->dev, "EEPROM initialization failed\n");
+ e_dev_err("EEPROM initialization failed\n");
return -EIO;
}
err:
vfree(tx_ring->tx_buffer_info);
tx_ring->tx_buffer_info = NULL;
- DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit "
- "descriptor ring\n");
+ e_err("Unable to allocate memory for the Tx descriptor ring\n");
return -ENOMEM;
}
err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
if (!err)
continue;
- DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
+ e_err("Allocation for Tx Queue %u failed\n", i);
break;
}
if (!rx_ring->rx_buffer_info)
rx_ring->rx_buffer_info = vmalloc(size);
if (!rx_ring->rx_buffer_info) {
- DPRINTK(PROBE, ERR,
- "vmalloc allocation failed for the rx desc ring\n");
+ e_err("vmalloc allocation failed for the Rx desc ring\n");
goto alloc_failed;
}
memset(rx_ring->rx_buffer_info, 0, size);
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
- DPRINTK(PROBE, ERR,
- "Memory allocation failed for the rx desc ring\n");
+ e_err("Memory allocation failed for the Rx desc ring\n");
vfree(rx_ring->rx_buffer_info);
goto alloc_failed;
}
err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
if (!err)
continue;
- DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
+ e_err("Allocation for Rx Queue %u failed\n", i);
break;
}
if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
return -EINVAL;
- DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
+ e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
- "suspend\n");
+ e_dev_err("Cannot enable PCI device from suspend\n");
return err;
}
pci_set_master(pdev);
err = ixgbe_init_interrupt_scheme(adapter);
if (err) {
- printk(KERN_ERR "ixgbe: Cannot initialize interrupts for "
- "device\n");
+ e_dev_err("Cannot initialize interrupts for device\n");
return err;
}
err = hw->phy.ops.identify_sfp(hw);
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize because "
- "an unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a supported "
- "module.\n");
+ e_dev_err("failed to initialize because an unsupported SFP+ "
+ "module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported "
+ "module.\n");
unregister_netdev(adapter->netdev);
return;
}
set_bit(__IXGBE_FDIR_INIT_DONE,
&(adapter->tx_ring[i]->reinit_state));
} else {
- DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
- "ignored adding FDIR ATR filters\n");
+ e_err("failed to finish FDIR re-initialization, "
+ "ignored adding FDIR ATR filters\n");
}
/* Done FDIR Re-initialization, enable transmits */
netif_tx_start_all_queues(adapter->netdev);
flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
}
- printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
- "Flow Control: %s\n",
- netdev->name,
+ e_info("NIC Link is Up %s, Flow Control: %s\n",
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
- "10 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gbps" : "unknown speed")),
+ "10 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ "1 Gbps" : "unknown speed")),
((flow_rx && flow_tx) ? "RX/TX" :
- (flow_rx ? "RX" :
- (flow_tx ? "TX" : "None"))));
+ (flow_rx ? "RX" :
+ (flow_tx ? "TX" : "None"))));
netif_carrier_on(netdev);
} else {
adapter->link_up = false;
adapter->link_speed = 0;
if (netif_carrier_ok(netdev)) {
- printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
- netdev->name);
+ e_info("NIC Link is Down\n");
netif_carrier_off(netdev);
}
}
break;
default:
if (unlikely(net_ratelimit())) {
- DPRINTK(PROBE, WARNING,
- "partial checksum but proto=%x!\n",
- skb->protocol);
+ e_warn("partial checksum but "
+ "proto=%x!\n", skb->protocol);
}
break;
}
return count;
dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
+ e_dev_err("TX DMA map failed\n");
/* clear timestamp and dma mappings for failed tx_buffer_info map */
tx_buffer_info->dma = 0;
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
if (err) {
- DPRINTK(PROBE, ERR,
- "Failed to enable PCI sriov: %d\n", err);
+ e_err("Failed to enable PCI sriov: %d\n", err);
goto err_novfs;
}
/* If call to enable VFs succeeded then allocate memory
}
/* Oh oh */
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for VF "
- "Data Storage - SRIOV disabled\n");
+ e_err("Unable to allocate memory for VF Data Storage - SRIOV "
+ "disabled\n");
pci_disable_sriov(adapter->pdev);
err_novfs:
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
+ e_dev_err("No usable DMA configuration, "
+ "aborting\n");
goto err_dma;
}
}
err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
IORESOURCE_MEM), ixgbe_driver_name);
if (err) {
- dev_err(&pdev->dev,
- "pci_request_selected_regions failed 0x%x\n", err);
+ e_dev_err("pci_request_selected_regions failed 0x%x\n", err);
goto err_pci_reg;
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- DPRINTK(PROBE, CRIT,
- "Fan has stopped, replace the adapter\n");
+ e_crit("Fan has stopped, replace the adapter\n");
}
/* reset_hw fills in the perm_addr as well */
round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize because "
- "an unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a supported "
- "module.\n");
+ e_dev_err("failed to initialize because an unsupported SFP+ "
+ "module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported "
+ "module.\n");
goto err_sw_init;
} else if (err) {
- dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+ e_dev_err("HW Init failed: %d\n", err);
goto err_sw_init;
}
ixgbe_probe_vf(adapter, ii);
- netdev->features = NETIF_F_SG |
+ netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
/* make sure the EEPROM is good */
if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
- dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
+ e_dev_err("The EEPROM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
- dev_err(&pdev->dev, "invalid MAC address\n");
+ e_dev_err("invalid MAC address\n");
err = -EIO;
goto err_eeprom;
}
hw->mac.ops.get_bus_info(hw);
/* print bus type/speed/width info */
- dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
+ e_dev_info("(PCI Express:%s:%s) %pM\n",
((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"),
((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
netdev->dev_addr);
ixgbe_read_pba_num_generic(hw, &part_num);
if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
- dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type, hw->phy.sfp_type,
- (part_num >> 8), (part_num & 0xff));
+ e_dev_info("MAC: %d, PHY: %d, SFP+: %d, "
+ "PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+ (part_num >> 8), (part_num & 0xff));
else
- dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type,
- (part_num >> 8), (part_num & 0xff));
+ e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type,
+ (part_num >> 8), (part_num & 0xff));
if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
- dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
- "this card is not sufficient for optimal "
- "performance.\n");
- dev_warn(&pdev->dev, "For optimal performance a x8 "
- "PCI-Express slot is required.\n");
+ e_dev_warn("PCI-Express bandwidth available for this card is "
+ "not sufficient for optimal performance.\n");
+ e_dev_warn("For optimal performance a x8 PCI-Express slot "
+ "is required.\n");
}
/* save off EEPROM version number */
if (err == IXGBE_ERR_EEPROM_VERSION) {
/* We are running on a pre-production device, log a warning */
- dev_warn(&pdev->dev, "This device is a pre-production "
- "adapter/LOM. Please be aware there may be issues "
- "associated with your hardware. If you are "
- "experiencing problems please contact your Intel or "
- "hardware representative who provided you with this "
- "hardware.\n");
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issues associated "
+ "with your hardware. If you are experiencing "
+ "problems please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
}
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
}
#endif
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
- adapter->num_vfs);
+ e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
for (i = 0; i < adapter->num_vfs; i++)
ixgbe_vf_configuration(pdev, (i | 0x10000000));
}
/* add san mac addr to netdev */
ixgbe_add_sanmac_netdev(netdev);
- dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
+ e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
cards_found++;
return 0;
pci_release_selected_regions(pdev, pci_select_bars(pdev,
IORESOURCE_MEM));
- DPRINTK(PROBE, INFO, "complete\n");
+ e_dev_info("complete\n");
free_netdev(netdev);
int err;
if (pci_enable_device_mem(pdev)) {
- DPRINTK(PROBE, ERR,
- "Cannot re-enable PCI device after reset.\n");
+ e_err("Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
err = pci_cleanup_aer_uncorrect_error_status(pdev);
if (err) {
- dev_err(&pdev->dev,
- "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
+ e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+ "failed 0x%0x\n", err);
/* non-fatal, continue */
}
if (netif_running(netdev)) {
if (ixgbe_up(adapter)) {
- DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n");
+ e_info("ixgbe_up failed after reset\n");
return;
}
}
static int __init ixgbe_init_module(void)
{
int ret;
- printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name,
- ixgbe_driver_string, ixgbe_driver_version);
-
- printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
+ pr_info("%s - version %s\n", ixgbe_driver_string,
+ ixgbe_driver_version);
+ pr_info("%s\n", ixgbe_copyright);
#ifdef CONFIG_IXGBE_DCA
dca_register_notify(&dca_notifier);
}
#endif /* CONFIG_IXGBE_DCA */
-#ifdef DEBUG
+
/**
- * ixgbe_get_hw_dev_name - return device name string
+ * ixgbe_get_hw_dev return device
* used by hardware layer to print debugging information
**/
-char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw)
+struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw)
{
struct ixgbe_adapter *adapter = hw->back;
- return adapter->netdev->name;
+ return adapter->netdev;
}
-#endif
module_exit(ixgbe_exit_module);
/* ixgbe_main.c */
projects / linux-beck.git / commitdiff