]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
authorGeorge Joseph <george.joseph@fairview5.com>
Tue, 8 Jul 2014 18:48:16 +0000 (12:48 -0600)
committerShawn Guo <shawn.guo@freescale.com>
Fri, 18 Jul 2014 08:49:45 +0000 (16:49 +0800)
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of
the 4329.  This changes the PADS assigned for the control lines.  Another
side effect of the change is that on the rev C1 board, usdhc driver can't
detect the chip presence correctly so usdhc2 now needs its 'non-removeable'
property removed.

So that rev B1 and earlier can continue to work, this patch splits the
board-specific definitions from imx6qdl-wandboard.dtsi into
imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi.  The new files
include the original base imx6qdl-wandboard.dtsi which retains the common
definitions.

The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and
imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi.
This makes the rev C1 board the new default.  The same pattern is used for
imx6q-wandboard.dts.

So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1
board and imxq-wandboard.dtb for the current rev C1 board.

Signed-off-by: George Joseph <george.joseph@fairview5.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6dl-wandboard-revb1.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6dl-wandboard.dts
arch/arm/boot/dts/imx6q-wandboard-revb1.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6q-wandboard.dts
arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi [new file with mode: 0644]
arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi [new file with mode: 0644]
arch/arm/boot/dts/imx6qdl-wandboard.dtsi

index 644d4c2e58ec438a440f0cd5831a222f7fd8c84c..90d5f494cf1d65e343efd6464f30139709705ed9 100644 (file)
@@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6dl-tx6u-801x.dtb \
        imx6dl-tx6u-811x.dtb \
        imx6dl-wandboard.dtb \
+       imx6dl-wandboard-revb1.dtb \
        imx6q-arm2.dtb \
        imx6q-cm-fx6.dtb \
        imx6q-cubox-i.dtb \
@@ -224,6 +225,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6q-sbc6x.dtb \
        imx6q-udoo.dtb \
        imx6q-wandboard.dtb \
+       imx6q-wandboard-revb1.dtb \
        imx6q-tx6q-1010.dtb \
        imx6q-tx6q-1010-comtft.dtb \
        imx6q-tx6q-1020.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
new file mode 100644 (file)
index 0000000..f607d4f
--- /dev/null
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+       model = "Wandboard i.MX6 Dual Lite Board";
+       compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+       memory {
+               reg = <0x10000000 0x40000000>;
+       };
+};
index e672891c1626757cd751888a9b97b78066558947..bbb6167230972661a6dc58347a68760dce85ef8c 100644 (file)
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
 
 / {
        model = "Wandboard i.MX6 Dual Lite Board";
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
new file mode 100644 (file)
index 0000000..20bf3c2
--- /dev/null
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+       model = "Wandboard i.MX6 Quad Board";
+       compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+       memory {
+               reg = <0x10000000 0x80000000>;
+       };
+};
+
+&sata {
+       status = "okay";
+};
index 36be17f207b14c95396c5b2bb3b7e7a35c113744..4a8a6ee13e9f52f4765920d0de11dd09b601bc41 100644 (file)
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 #include "imx6q.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
 
 / {
        model = "Wandboard i.MX6 Quad Board";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
new file mode 100644 (file)
index 0000000..ef7fa62
--- /dev/null
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx6qdl-wandboard {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0         /* GPIO_0_CLKO */
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x80000000      /* uSDHC1 CD */
+                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09          0x80000000      /* uSDHC3 CD */
+                               MX6QDL_PAD_EIM_EB1__GPIO2_IO29          0x0f0b0         /* WL_REF_ON */
+                               MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x0f0b0         /* WL_RST_N */
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x000b0         /* WL_REG_ON */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x80000000      /* WL_HOST_WAKE */
+                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x80000000      /* WL_WAKE */
+                               MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x80000000      /* RGMII_nRST */
+                               MX6QDL_PAD_EIM_DA13__GPIO3_IO13         0x80000000      /* BT_ON */
+                               MX6QDL_PAD_EIM_DA14__GPIO3_IO14         0x80000000      /* BT_WAKE */
+                               MX6QDL_PAD_EIM_DA15__GPIO3_IO15         0x80000000      /* BT_HOST_WAKE */                              
+                       >;
+               };
+       };
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       non-removable;
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
new file mode 100644 (file)
index 0000000..8d893a7
--- /dev/null
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx6qdl-wandboard {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0         /* GPIO_0_CLKO */
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x80000000      /* uSDHC1 CD */
+                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09          0x80000000      /* uSDHC3 CD */
+                               MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00       0x0f0b0         /* WIFI_ON (reset, active low) */
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x000b0         /* WL_REG_ON (unused) */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x80000000      /* WL_HOST_WAKE, input */
+                               MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31       0x0f0b0         /* GPIO5_IO31 (Wifi Power Enable) */
+                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x80000000      /* WL_WAKE (unused) */
+                               MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21       0x80000000      /* BT_ON */
+                               MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30       0x80000000      /* BT_WAKE */
+                               MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x80000000      /* BT_HOST_WAKE */
+                               MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x80000000      /* RGMII_nRST */
+                       >;
+               };
+       };
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       status = "okay";
+};
index 13eae9e5bae8f06c8510ff3abecd040174c6897b..5fb091675582e25b84026f5447d0be604f9266ac 100644 (file)
 
 &iomuxc {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
 
        imx6qdl-wandboard {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x130b0
-                               MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000
-                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09   0x80000000
-                               MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
-                               MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
-                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
-                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
-                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
-                               MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
-                       >;
-               };
 
                pinctrl_audmux: audmuxgrp {
                        fsl,pins = <
        status = "okay";
 };
 
-&usdhc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc2>;
-       non-removable;
-       status = "okay";
-};
-
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;