staging: comedi: icp_multi: tidy up the interrupt enable/status register bits

For aesthetics, rename these bit defines so they are associated with
the registers and use the BIT macro to define them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 57eded18b99e98da3d575a24da80abde43dee45a..5a54b3a87f525d7eabddccabb9d5439d8c07bcbc 100644 (file)
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -64,26 +64,22 @@
 #define ICP_MULTI_AO           6       /* R/W: Analogue output data */
 #define ICP_MULTI_DI           8       /* R/W: Digital inputs */
 #define ICP_MULTI_DO           0x0A    /* R/W: Digital outputs */
-#define ICP_MULTI_INT_EN       0x0C    /* R/W: Interrupt enable register */
-#define ICP_MULTI_INT_STAT     0x0E    /* R/W: Interrupt status register */
+#define ICP_MULTI_INT_EN       0x0c    /* R/W: Interrupt enable register */
+#define ICP_MULTI_INT_STAT     0x0e    /* R/W: Interrupt status register */
+#define ICP_MULTI_INT_ADC_RDY  BIT(0)  /* A/D conversion ready interrupt */
+#define ICP_MULTI_INT_DAC_RDY  BIT(1)  /* D/A conversion ready interrupt */
+#define ICP_MULTI_INT_DOUT_ERR BIT(2)  /* Digital output error interrupt */
+#define ICP_MULTI_INT_DIN_STAT BIT(3)  /* Digital input status change int. */
+#define ICP_MULTI_INT_CIE0     BIT(4)  /* Counter 0 overrun interrupt */
+#define ICP_MULTI_INT_CIE1     BIT(5)  /* Counter 1 overrun interrupt */
+#define ICP_MULTI_INT_CIE2     BIT(6)  /* Counter 2 overrun interrupt */
+#define ICP_MULTI_INT_CIE3     BIT(7)  /* Counter 3 overrun interrupt */
+#define ICP_MULTI_INT_MASK     0xff    /* All interrupts */
 #define ICP_MULTI_CNTR0                0x10    /* R/W: Counter 0 */
 #define ICP_MULTI_CNTR1                0x12    /* R/W: counter 1 */
 #define ICP_MULTI_CNTR2                0x14    /* R/W: Counter 2 */
 #define ICP_MULTI_CNTR3                0x16    /* R/W: Counter 3 */
 
-/*  Define bits from interrupt enable/status registers */
-#define        ADC_READY       0x0001  /* A/d conversion ready interrupt */
-#define        DAC_READY       0x0002  /* D/a conversion ready interrupt */
-#define        DOUT_ERROR      0x0004  /* Digital output error interrupt */
-#define        DIN_STATUS      0x0008  /* Digital input status change interrupt */
-#define        CIE0            0x0010  /* Counter 0 overrun interrupt */
-#define        CIE1            0x0020  /* Counter 1 overrun interrupt */
-#define        CIE2            0x0040  /* Counter 2 overrun interrupt */
-#define        CIE3            0x0080  /* Counter 3 overrun interrupt */
-
-/*  Useful definitions */
-#define        Status_IRQ      0x00ff  /*  All interrupts */
-
 /*  Define analogue range */
 static const struct comedi_lrange range_analog = {
        4, {
@@ -184,11 +180,11 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
        int n;
 
        /*  Disable A/D conversion ready interrupt */
-       devpriv->IntEnable &= ~ADC_READY;
+       devpriv->IntEnable &= ~ICP_MULTI_INT_ADC_RDY;
        writew(devpriv->IntEnable, dev->mmio + ICP_MULTI_INT_EN);
 
        /*  Clear interrupt status */
-       devpriv->IntStatus |= ADC_READY;
+       devpriv->IntStatus |= ICP_MULTI_INT_ADC_RDY;
        writew(devpriv->IntStatus, dev->mmio + ICP_MULTI_INT_STAT);
 
        /*  Set up appropriate channel, mode and range data, for specified ch */
@@ -211,11 +207,11 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
        }
 
        /*  Disable interrupt */
-       devpriv->IntEnable &= ~ADC_READY;
+       devpriv->IntEnable &= ~ICP_MULTI_INT_ADC_RDY;
        writew(devpriv->IntEnable, dev->mmio + ICP_MULTI_INT_EN);
 
        /*  Clear interrupt status */
-       devpriv->IntStatus |= ADC_READY;
+       devpriv->IntStatus |= ICP_MULTI_INT_ADC_RDY;
        writew(devpriv->IntStatus, dev->mmio + ICP_MULTI_INT_STAT);
 
        return ret ? ret : n;
@@ -245,11 +241,11 @@ static int icp_multi_ao_insn_write(struct comedi_device *dev,
        int i;
 
        /*  Disable D/A conversion ready interrupt */
-       devpriv->IntEnable &= ~DAC_READY;
+       devpriv->IntEnable &= ~ICP_MULTI_INT_DAC_RDY;
        writew(devpriv->IntEnable, dev->mmio + ICP_MULTI_INT_EN);
 
        /*  Clear interrupt status */
-       devpriv->IntStatus |= DAC_READY;
+       devpriv->IntStatus |= ICP_MULTI_INT_DAC_RDY;
        writew(devpriv->IntStatus, dev->mmio + ICP_MULTI_INT_STAT);
 
        /*  Set up range and channel data */
@@ -272,12 +268,12 @@ static int icp_multi_ao_insn_write(struct comedi_device *dev,
                ret = comedi_timeout(dev, s, insn, icp_multi_ao_eoc, 0);
                if (ret) {
                        /*  Disable interrupt */
-                       devpriv->IntEnable &= ~DAC_READY;
+                       devpriv->IntEnable &= ~ICP_MULTI_INT_DAC_RDY;
                        writew(devpriv->IntEnable,
                               dev->mmio + ICP_MULTI_INT_EN);
 
                        /*  Clear interrupt status */
-                       devpriv->IntStatus |= DAC_READY;
+                       devpriv->IntStatus |= ICP_MULTI_INT_DAC_RDY;
                        writew(devpriv->IntStatus,
                               dev->mmio + ICP_MULTI_INT_STAT);
 
@@ -341,28 +337,28 @@ static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
        int int_no;
 
        /*  Is this interrupt from our board? */
-       int_no = readw(dev->mmio + ICP_MULTI_INT_STAT) & Status_IRQ;
+       int_no = readw(dev->mmio + ICP_MULTI_INT_STAT) & ICP_MULTI_INT_MASK;
        if (!int_no)
                /*  No, exit */
                return IRQ_NONE;
 
        /*  Determine which interrupt is active & handle it */
        switch (int_no) {
-       case ADC_READY:
+       case ICP_MULTI_INT_ADC_RDY:
                break;
-       case DAC_READY:
+       case ICP_MULTI_INT_DAC_RDY:
                break;
-       case DOUT_ERROR:
+       case ICP_MULTI_INT_DOUT_ERR:
                break;
-       case DIN_STATUS:
+       case ICP_MULTI_INT_DIN_STAT:
                break;
-       case CIE0:
+       case ICP_MULTI_INT_CIE0:
                break;
-       case CIE1:
+       case ICP_MULTI_INT_CIE1:
                break;
-       case CIE2:
+       case ICP_MULTI_INT_CIE2:
                break;
-       case CIE3:
+       case ICP_MULTI_INT_CIE3:
                break;
        default:
                break;