</para>
<para>
The simplest way to activate the FLASH based bad block table support
- is to set the option NAND_USE_FLASH_BBT in the option field of
+ is to set the option NAND_USE_FLASH_BBT in the bbt_option field of
the nand chip structure before calling nand_scan(). For AG-AND
chips is this done by default.
This activates the default FLASH based bad block table functionality
These constants are defined in nand.h. They are ored together to describe
the functionality.
<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT 0x00010000
/* The hw ecc generator provides a syndrome instead a ecc value on read
* This can only work if we have the ecc bytes directly behind the
* data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
.timing = &da830_evm_nandflash_timing,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.timing = &da850_evm_nandflash_timing,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.ecc_bits = 4,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
};
static struct resource davinci_nand_resources[] = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.ecc_bits = 4,
};
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.timing = &davinci_evm_nandflash_timing,
};
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+ .bbt_options = NAND_USE_FLASH_BBT,
+ .options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
};
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
};
static struct resource davinci_ntosd2_nandflash_resource[] = {
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
.ecc_bits = 1,
};
nand_ecc_modes_t ecc_mode;
u8 ecc_bits;
- /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+ /* e.g. NAND_BUSWIDTH_16 */
unsigned options;
+ /* e.g. NAND_USE_FLASH_BBT */
+ unsigned bbt_options;
/* Main and mirror bbt descriptor overrides */
struct nand_bbt_descr *bbt_td;
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_USE_FLASH_BBT,
},
.ctrl = {
/*
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_USE_FLASH_BBT; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_USE_FLASH_BBT; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_USE_FLASH_BBT;
}
if (!cpu_has_dma())
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_USE_FLASH_BBT;
*/
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_USE_FLASH_BBT;
/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_USE_FLASH_BBT)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
cafe->nand.chip_delay = 0;
/* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.bbt_options = NAND_USE_FLASH_BBT;
+ cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
this->ecc.correct = nand_correct_data;
/* Enable the following for a flash based bad block table */
- this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ this->bbt_options = NAND_USE_FLASH_BBT;
+ this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;
- /* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+ /* options such as NAND_USE_FLASH_BBT */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
denali->nand.bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.bbt_options |= NAND_USE_FLASH_BBT;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
/* Denali Controller only support 15bit and 8bit ECC in MRST,
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_USE_FLASH_BBT;
doc->physadr = physadr;
doc->virtadr = virtadr;
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_USE_FLASH_BBT;
chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_USE_FLASH_BBT;
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_USE_FLASH_BBT;
}
init_completion(&host->op_completion);
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
+ if (chip->bbt_options & NAND_USE_FLASH_BBT)
ret = nand_update_bbt(mtd, ofs);
else {
nand_get_device(chip, mtd, FL_WRITING);
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_USE_FLASH_BBT));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_USE_FLASH_BBT;
return nand_scan_bbt(mtd, &agand_flashbased);
}
/* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ if (this->bbt_options & NAND_USE_FLASH_BBT) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
this->bbt_td = &bbt_main_no_bbt_descr;
this->bbt_md = &bbt_mirror_no_bbt_descr;
} else {
switch (bbt) {
case 2:
- chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_USE_FLASH_BBT;
case 0:
break;
default:
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_USE_FLASH_BBT;
/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
/* If you use u-boot BBT creation code, specifying this flag will
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt)
- chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_USE_FLASH_BBT;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
}
/**
#define NAND_BBT_SCANLASTPAGE 0x00008000
/* The nand_bbt_descr was created dynamicaly and must be freed */
#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB 0x00400000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_USE_FLASH_BBT 0x00040000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB 0x00080000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
/*
#define NAND_OWN_BUFFERS 0x00040000
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
/* Create an empty BBT with no vendor information if the BBT is available */
#define NAND_CREATE_EMPTY_BBT 0x01000000
projects / karo-tx-linux.git / commitdiff