static int get_volume(struct i2c_client *client)
{
+ struct cx25840_state *state = i2c_get_clientdata(client);
+ int vol;
+
+ if (state->unmute_volume >= 0)
+ return state->unmute_volume;
+
/* Volume runs +18dB to -96dB in 1/2dB steps
* change to fit the msp3400 -114dB to +12dB range */
/* check PATH1_VOLUME */
- int vol = 228 - cx25840_read(client, 0x8d4);
+ vol = 228 - cx25840_read(client, 0x8d4);
vol = (vol / 2) + 23;
return vol << 9;
}
static void set_volume(struct i2c_client *client, int volume)
{
- /* First convert the volume to msp3400 values (0-127) */
- int vol = volume >> 9;
+ struct cx25840_state *state = i2c_get_clientdata(client);
+ int vol;
+
+ if (state->unmute_volume >= 0) {
+ state->unmute_volume = volume;
+ return;
+ }
+
+ /* Convert the volume to msp3400 values (0-127) */
+ vol = volume >> 9;
+
/* now scale it up to cx25840 values
* -114dB to -96dB maps to 0
* this should be 19, but in my testing that was 4dB too loud */
static int get_mute(struct i2c_client *client)
{
- /* check SRC1_MUTE_EN */
- return cx25840_read(client, 0x8d3) & 0x2 ? 1 : 0;
+ struct cx25840_state *state = i2c_get_clientdata(client);
+
+ return state->unmute_volume >= 0;
}
static void set_mute(struct i2c_client *client, int mute)
{
struct cx25840_state *state = i2c_get_clientdata(client);
- if (state->aud_input != CX25840_AUDIO_SERIAL) {
- /* Must turn off microcontroller in order to mute sound.
- * Not sure if this is the best method, but it does work.
- * If the microcontroller is running, then it will undo any
- * changes to the mute register. */
- if (mute) {
- /* disable microcontroller */
- cx25840_and_or(client, 0x803, ~0x10, 0x00);
- cx25840_write(client, 0x8d3, 0x1f);
- } else {
- /* enable microcontroller */
- cx25840_and_or(client, 0x803, ~0x10, 0x10);
- }
- } else {
- /* SRC1_MUTE_EN */
- cx25840_and_or(client, 0x8d3, ~0x2, mute ? 0x02 : 0x00);
+ if (mute && state->unmute_volume == -1) {
+ int vol = get_volume(client);
+
+ set_volume(client, 0);
+ state->unmute_volume = vol;
+ }
+ else if (!mute && state->unmute_volume != -1) {
+ int vol = state->unmute_volume;
+
+ state->unmute_volume = -1;
+ set_volume(client, vol);
}
}
state->audclk_freq = 48000;
state->pvr150_workaround = 0;
state->audmode = V4L2_TUNER_MODE_LANG1;
+ state->unmute_volume = -1;
state->vbi_line_offset = 8;
state->id = id;
state->rev = device_id;
}
v4l_info(client, "Detected audio standard: %s\n", p);
v4l_info(client, "Audio muted: %s\n",
- (mute_ctl & 0x2) ? "yes" : "no");
+ (state->unmute_volume >= 0) ? "yes" : "no");
v4l_info(client, "Audio microcontroller: %s\n",
- (download_ctl & 0x10) ? "running" : "stopped");
+ (download_ctl & 0x10) ?
+ ((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
switch (audio_config >> 4) {
case 0x00: p = "undefined"; break;