]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: ux500: drop a chunk of GPIO definitions
authorLinus Walleij <linus.walleij@linaro.org>
Mon, 3 Feb 2014 22:56:54 +0000 (23:56 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Tue, 4 Mar 2014 00:58:10 +0000 (08:58 +0800)
The Ux500 GPIOs are now assigned dynamically from the device tree.
Drop this table of static assignments.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/mach-ux500/board-mop500.h

index bb408b8f48dee6325fac1aaead16c6096a451ee4..32cc0d8d8a0ed6576ebbc88a11081cc87d875086 100644 (file)
@@ -7,78 +7,9 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
-/* For NOMADIK_NR_GPIO */
-#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 #include <linux/amba/mmci.h>
 
-/* Snowball specific GPIO assignments, this board has no GPIO expander */
-#define SNOWBALL_ACCEL_INT1_GPIO       163
-#define SNOWBALL_ACCEL_INT2_GPIO       164
-#define SNOWBALL_MAGNET_DRDY_GPIO      165
-#define SNOWBALL_SDMMC_EN_GPIO         217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO     228
-#define SNOWBALL_SDMMC_CD_GPIO         218
-
-/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_SDMMC_1V8_3V_GPIO      5
-#define HREFV60_CAMERA_FLASH_ENABLE    21
-#define HREFV60_MAGNET_DRDY_GPIO       32
-#define HREFV60_DISP1_RST_GPIO         65
-#define HREFV60_DISP2_RST_GPIO         66
-#define HREFV60_ACCEL_INT1_GPIO                82
-#define HREFV60_ACCEL_INT2_GPIO                83
-#define HREFV60_SDMMC_CD_GPIO          95
-#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
-#define HREFV60_TOUCH_RST_GPIO         143
-#define HREFV60_HAL_SW_GPIO            145
-#define HREFV60_SDMMC_EN_GPIO          169
-#define HREFV60_MMIO_XENON_CHARGE      170
-#define HREFV60_PROX_SENSE_GPIO                217
-
-/* MOP500 generic GPIOs */
-#define CAMERA_FLASH_INT_PIN           7
-#define CYPRESS_TOUCH_INT_PIN          84
-#define XSHUTDOWN_PRIMARY_SENSOR       141
-#define XSHUTDOWN_SECONDARY_SENSOR     142
-#define CYPRESS_TOUCH_RST_GPIO         143
-#define MOP500_HDMI_RST_GPIO           196
-#define CYPRESS_SLAVE_SELECT_GPIO      216
-
-/* GPIOs on the TC35892 expander */
-#define MOP500_EGPIO(x)                        (NOMADIK_NR_GPIO + (x))
-#define GPIO_MAGNET_DRDY               MOP500_EGPIO(1)
-#define GPIO_SDMMC_CD                  MOP500_EGPIO(3)
-#define GPIO_CAMERA_FLASH_ENABLE       MOP500_EGPIO(4)
-#define GPIO_MMIO_XENON_CHARGE         MOP500_EGPIO(5)
-#define GPIO_PROX_SENSOR               MOP500_EGPIO(7)
-#define GPIO_HAL_SENSOR                        MOP500_EGPIO(8)
-#define GPIO_ACCEL_INT1                        MOP500_EGPIO(10)
-#define GPIO_ACCEL_INT2                        MOP500_EGPIO(11)
-#define GPIO_BU21013_CS                        MOP500_EGPIO(13)
-#define MOP500_DISP2_RST_GPIO          MOP500_EGPIO(14)
-#define MOP500_DISP1_RST_GPIO          MOP500_EGPIO(15)
-#define GPIO_SDMMC_EN                  MOP500_EGPIO(17)
-#define GPIO_SDMMC_1V8_3V_SEL          MOP500_EGPIO(18)
-#define MOP500_EGPIO_END               MOP500_EGPIO(24)
-
-/*
- * GPIOs on the AB8500 mixed-signals circuit
- * Notice that we subtract 1 from the number passed into the macro, this is
- * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
- * parens matches the GPIO pin number in the data sheet.
- */
-#define MOP500_AB8500_PIN_GPIO(x)      (MOP500_EGPIO_END + (x) - 1)
-/*Snowball AB8500 GPIO */
-#define SNOWBALL_VSMPS2_1V8_GPIO       MOP500_AB8500_PIN_GPIO(1)       /* SYSCLKREQ2/GPIO1 */
-#define SNOWBALL_PM_GPIO1_GPIO         MOP500_AB8500_PIN_GPIO(2)       /* SYSCLKREQ3/GPIO2 */
-#define SNOWBALL_WLAN_CLK_REQ_GPIO     MOP500_AB8500_PIN_GPIO(3)       /* SYSCLKREQ4/GPIO3 */
-#define SNOWBALL_PM_GPIO4_GPIO         MOP500_AB8500_PIN_GPIO(4)       /* SYSCLKREQ6/GPIO4 */
-#define SNOWBALL_EN_3V6_GPIO           MOP500_AB8500_PIN_GPIO(16)      /* PWMOUT3/GPIO16 */
-#define SNOWBALL_PME_ETH_GPIO          MOP500_AB8500_PIN_GPIO(24)      /* SYSCLKREQ7/GPIO24 */
-#define SNOWBALL_EN_3V3_ETH_GPIO       MOP500_AB8500_PIN_GPIO(26)      /* GPIO26 */
-
-struct device;
 extern struct mmci_platform_data mop500_sdi0_data;
 extern struct mmci_platform_data mop500_sdi1_data;
 extern struct mmci_platform_data mop500_sdi2_data;