L: netdev@vger.kernel.org
L: cbe-oss-dev@lists.ozlabs.org
S: Maintained
-F: drivers/net/ps3_gelic_net.*
+F: drivers/net/ethernet/toshiba/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/spider_net.txt
-F: drivers/net/spider_net*
+F: drivers/net/ethernet/toshiba/spider_net*
SPU FILE SYSTEM
M: Jeremy Kerr <jk@ozlabs.org>
To compile this driver as a module, choose M here. The module
will be called forcedeth.
-config TC35815
- tristate "TOSHIBA TC35815 Ethernet support"
- depends on NET_PCI && PCI && MIPS
- select PHYLIB
-
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
-config SPIDER_NET
- tristate "Spider Gigabit Ethernet driver"
- depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
- select FW_LOADER
- select SUNGEM_PHY
- help
- This driver supports the Gigabit Ethernet chips present on the
- Cell Processor-Based Blades from IBM.
-
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
-config GELIC_NET
- tristate "PS3 Gigabit Ethernet driver"
- depends on PPC_PS3
- select PS3_SYS_MANAGER
- help
- This driver supports the network device on the PS3 game
- console. This driver has built-in support for Ethernet.
-
- To compile this driver as a module, choose M here: the
- module will be called ps3_gelic.
-
-config GELIC_WIRELESS
- bool "PS3 Wireless support"
- depends on WLAN
- depends on GELIC_NET
- select WIRELESS_EXT
- help
- This option adds the support for the wireless feature of PS3.
- If you have the wireless-less model of PS3 or have no plan to
- use wireless feature, disabling this option saves memory. As
- the driver automatically distinguishes the models, you can
- safely enable this option even if you have a wireless-less model.
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
-spidernet-y += spider_net.o spider_net_ethtool.o
-obj-$(CONFIG_SPIDER_NET) += spidernet.o
-obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
-ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
-obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
--- /dev/null
+#
+# Toshiba network device configuration
+#
+
+config NET_VENDOR_TOSHIBA
+ bool "Toshiba devices"
+ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Toshiba cards. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_TOSHIBA
+
+config GELIC_NET
+ tristate "PS3 Gigabit Ethernet driver"
+ depends on PPC_PS3
+ select PS3_SYS_MANAGER
+ ---help---
+ This driver supports the network device on the PS3 game
+ console. This driver has built-in support for Ethernet.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ps3_gelic.
+
+config GELIC_WIRELESS
+ bool "PS3 Wireless support"
+ depends on GELIC_NET && WLAN
+ select WIRELESS_EXT
+ ---help---
+ This option adds the support for the wireless feature of PS3.
+ If you have the wireless-less model of PS3 or have no plan to
+ use wireless feature, disabling this option saves memory. As
+ the driver automatically distinguishes the models, you can
+ safely enable this option even if you have a wireless-less model.
+
+config SPIDER_NET
+ tristate "Spider Gigabit Ethernet driver"
+ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
+ select FW_LOADER
+ select SUNGEM_PHY
+ ---help---
+ This driver supports the Gigabit Ethernet chips present on the
+ Cell Processor-Based Blades from IBM.
+
+config TC35815
+ tristate "TOSHIBA TC35815 Ethernet support"
+ depends on PCI && MIPS
+ select PHYLIB
+
+endif # NET_VENDOR_TOSHIBA
--- /dev/null
+#
+# Makefile for the Toshiba network device drivers.
+#
+
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
+spidernet-y += spider_net.o spider_net_ethtool.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
+obj-$(CONFIG_TC35815) += tc35815.o