This driver can be built as a module. If built as a module it will be
called "da9055"
+config MFD_DA9063
+ bool "Dialog Semiconductor DA9063 PMIC Support"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
+ This includes the I2C driver and core APIs.
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MC13783
tristate
da9055-objs := da9055-core.o da9055-i2c.o
obj-$(CONFIG_MFD_DA9055) += da9055.o
+da9063-objs := da9063-core.o da9063-i2c.o
+obj-$(CONFIG_MFD_DA9063) += da9063.o
+
obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o
obj-$(CONFIG_MFD_MAX8907) += max8907.o
--- /dev/null
+/*
+ * da9063-core.c: Device access for Dialog DA9063 modules
+ *
+ * Copyright 2012 Dialog Semiconductors Ltd.
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>,
+ * Michal Hajduk <michal.hajduk@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+#include <linux/proc_fs.h>
+#include <linux/kthread.h>
+#include <linux/uaccess.h>
+
+
+static struct mfd_cell da9063_devs[] = {
+ {
+ .name = DA9063_DRVNAME_REGULATORS,
+ },
+ {
+ .name = DA9063_DRVNAME_LEDS,
+ },
+ {
+ .name = DA9063_DRVNAME_WATCHDOG,
+ },
+ {
+ .name = DA9063_DRVNAME_HWMON,
+ },
+ {
+ .name = DA9063_DRVNAME_ONKEY,
+ },
+ {
+ .name = DA9063_DRVNAME_RTC,
+ },
+ {
+ .name = DA9063_DRVNAME_VIBRATION,
+ },
+};
+
+int da9063_device_init(struct da9063 *da9063, unsigned int irq)
+{
+ struct da9063_pdata *pdata = da9063->dev->platform_data;
+ int model, revision;
+ int ret;
+
+ if (pdata) {
+ da9063->flags = pdata->flags;
+ da9063->irq_base = pdata->irq_base;
+ } else {
+ da9063->flags = 0;
+ da9063->irq_base = 0;
+ }
+ da9063->chip_irq = irq;
+
+ if (pdata && pdata->init != NULL) {
+ ret = pdata->init(da9063);
+ if (ret != 0) {
+ dev_err(da9063->dev,
+ "Platform initialization failed.\n");
+ return ret;
+ }
+ }
+
+ ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
+ if (ret < 0) {
+ dev_err(da9063->dev, "Cannot read chip model id.\n");
+ return -EIO;
+ }
+ if (model != PMIC_DA9063) {
+ dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision);
+ if (ret < 0) {
+ dev_err(da9063->dev, "Cannot read chip revision id.\n");
+ return -EIO;
+ }
+ revision >>= DA9063_CHIP_VARIANT_SHIFT;
+ if (revision != 3) {
+ dev_err(da9063->dev, "Unknown chip revision: %d\n", revision);
+ return -ENODEV;
+ }
+
+ da9063->model = model;
+ da9063->revision = revision;
+
+ dev_info(da9063->dev,
+ "Device detected (model-ID: 0x%02X rev-ID: 0x%02X)\n",
+ model, revision);
+
+ ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
+ ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
+ NULL);
+ if (ret)
+ dev_err(da9063->dev, "Cannot add MFD cells\n");
+
+ return ret;
+}
+
+void da9063_device_exit(struct da9063 *da9063)
+{
+ mfd_remove_devices(da9063->dev);
+}
+
+MODULE_DESCRIPTION("PMIC driver for Dialog DA9063");
+MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>, Michal Hajduk <michal.hajduk@diasemi.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* da9063-i2c.c: Interrupt support for Dialog DA9063
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+static const struct regmap_range da9063_readable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_T_OFFSET,
+ .range_max = DA9063_REG_GP_ID_19,
+ }, {
+ .range_min = DA9063_REG_CHIP_ID,
+ .range_max = DA9063_REG_CHIP_VARIANT,
+ },
+};
+
+static const struct regmap_range da9063_writeable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_REG_PAGE_CON,
+ }, {
+ .range_min = DA9063_REG_FAULT_LOG,
+ .range_max = DA9063_REG_VSYS_MON,
+ }, {
+ .range_min = DA9063_REG_COUNT_S,
+ .range_max = DA9063_REG_ALARM_Y,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_CONFIG_I,
+ .range_max = DA9063_REG_MON_REG_4,
+ }, {
+ .range_min = DA9063_REG_GP_ID_0,
+ .range_max = DA9063_REG_GP_ID_19,
+ },
+};
+
+static const struct regmap_range da9063_volatile_ranges[] = {
+ {
+ .range_min = DA9063_REG_STATUS_A,
+ .range_max = DA9063_REG_EVENT_D,
+ }, {
+ .range_min = DA9063_REG_CONTROL_F,
+ .range_max = DA9063_REG_CONTROL_F,
+ }, {
+ .range_min = DA9063_REG_ADC_MAN,
+ .range_max = DA9063_REG_ADC_MAN,
+ }, {
+ .range_min = DA9063_REG_ADC_RES_L,
+ .range_max = DA9063_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_REG_MON_REG_5,
+ .range_max = DA9063_REG_MON_REG_6,
+ },
+};
+
+static const struct regmap_access_table da9063_readable_table = {
+ .yes_ranges = da9063_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_readable_ranges),
+};
+
+static const struct regmap_access_table da9063_writeable_table = {
+ .yes_ranges = da9063_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_writeable_ranges),
+};
+
+static const struct regmap_access_table da9063_volatile_table = {
+ .yes_ranges = da9063_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_volatile_ranges),
+};
+
+static const struct regmap_range_cfg da9063_range_cfg[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_REG_CHIP_VARIANT,
+ .selector_reg = DA9063_REG_PAGE_CON,
+ .selector_mask = 1 << DA9063_I2C_PAGE_SEL_SHIFT,
+ .selector_shift = DA9063_I2C_PAGE_SEL_SHIFT,
+ .window_start = 0,
+ .window_len = 256,
+ }
+};
+
+static struct regmap_config da9063_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .ranges = da9063_range_cfg,
+ .num_ranges = ARRAY_SIZE(da9063_range_cfg),
+ .max_register = DA9063_REG_CHIP_VARIANT,
+
+ .cache_type = REGCACHE_RBTREE,
+
+ .rd_table = &da9063_readable_table,
+ .wr_table = &da9063_writeable_table,
+ .volatile_table = &da9063_volatile_table,
+};
+
+static int da9063_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct da9063 *da9063;
+ int ret;
+
+ da9063 = devm_kzalloc(&i2c->dev, sizeof(struct da9063), GFP_KERNEL);
+ if (da9063 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, da9063);
+ da9063->dev = &i2c->dev;
+ da9063->chip_irq = i2c->irq;
+
+ da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config);
+ if (IS_ERR(da9063->regmap)) {
+ ret = PTR_ERR(da9063->regmap);
+ dev_err(da9063->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ return da9063_device_init(da9063, i2c->irq);
+}
+
+static int da9063_i2c_remove(struct i2c_client *i2c)
+{
+ struct da9063 *da9063 = i2c_get_clientdata(i2c);
+
+ da9063_device_exit(da9063);
+
+ return 0;
+}
+
+static const struct i2c_device_id da9063_i2c_id[] = {
+ {"da9063", PMIC_DA9063},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, da9063_i2c_id);
+
+static struct i2c_driver da9063_i2c_driver = {
+ .driver = {
+ .name = "da9063",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9063_i2c_probe,
+ .remove = da9063_i2c_remove,
+ .id_table = da9063_i2c_id,
+};
+
+module_i2c_driver(da9063_i2c_driver);
--- /dev/null
+/*
+ * Definitions for DA9063 MFD driver
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Michal Hajduk <michal.hajduk@diasemi.com>
+ * Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_DA9063_CORE_H__
+#define __MFD_DA9063_CORE_H__
+
+#include <linux/interrupt.h>
+#include <linux/mfd/da9063/registers.h>
+
+/* DA9063 modules */
+#define DA9063_DRVNAME_CORE "da9063-core"
+#define DA9063_DRVNAME_REGULATORS "da9063-regulators"
+#define DA9063_DRVNAME_LEDS "da9063-leds"
+#define DA9063_DRVNAME_WATCHDOG "da9063-watchdog"
+#define DA9063_DRVNAME_HWMON "da9063-hwmon"
+#define DA9063_DRVNAME_ONKEY "da9063-onkey"
+#define DA9063_DRVNAME_RTC "da9063-rtc"
+#define DA9063_DRVNAME_VIBRATION "da9063-vibration"
+
+enum da9063_models {
+ PMIC_DA9063 = 0x61,
+};
+
+struct da9063 {
+ /* Device */
+ struct device *dev;
+ unsigned short model;
+ unsigned short revision;
+ unsigned int flags;
+
+ /* Control interface */
+ struct regmap *regmap;
+
+ /* Interrupts */
+ int chip_irq;
+ unsigned int irq_base;
+};
+
+int da9063_device_init(struct da9063 *da9063, unsigned int irq);
+
+void da9063_device_exit(struct da9063 *da9063);
+
+#endif /* __MFD_DA9063_CORE_H__ */
--- /dev/null
+/*
+ * Platform configuration options for DA9063
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Michal Hajduk <michal.hajduk@diasemi.com>
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_DA9063_PDATA_H__
+#define __MFD_DA9063_PDATA_H__
+
+#include <linux/regulator/machine.h>
+
+/*
+ * Regulator configuration
+ */
+/* DA9063 regulator IDs */
+enum {
+ /* BUCKs */
+ DA9063_ID_BCORE1,
+ DA9063_ID_BCORE2,
+ DA9063_ID_BPRO,
+ DA9063_ID_BMEM,
+ DA9063_ID_BIO,
+ DA9063_ID_BPERI,
+
+ /* BCORE1 and BCORE2 in merged mode */
+ DA9063_ID_BCORES_MERGED,
+ /* BMEM and BIO in merged mode */
+ DA9063_ID_BMEM_BIO_MERGED,
+ /* When two BUCKs are merged, they cannot be reused separately */
+
+ /* LDOs */
+ DA9063_ID_LDO1,
+ DA9063_ID_LDO2,
+ DA9063_ID_LDO3,
+ DA9063_ID_LDO4,
+ DA9063_ID_LDO5,
+ DA9063_ID_LDO6,
+ DA9063_ID_LDO7,
+ DA9063_ID_LDO8,
+ DA9063_ID_LDO9,
+ DA9063_ID_LDO10,
+ DA9063_ID_LDO11,
+};
+
+/* Regulators platform data */
+struct da9063_regulator_data {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+struct da9063_regulators_pdata {
+ unsigned n_regulators;
+ struct da9063_regulator_data *regulator_data;
+};
+
+
+/*
+ * RGB LED configuration
+ */
+/* LED IDs for flags in struct led_info. */
+enum {
+ DA9063_GPIO11_LED,
+ DA9063_GPIO14_LED,
+ DA9063_GPIO15_LED,
+
+ DA9063_LED_NUM
+};
+#define DA9063_LED_ID_MASK 0x3
+
+/* LED polarity for flags in struct led_info. */
+#define DA9063_LED_HIGH_LEVEL_ACTIVE 0x0
+#define DA9063_LED_LOW_LEVEL_ACTIVE 0x4
+
+
+/*
+ * General PMIC configuration
+ */
+/* HWMON ADC channels configuration */
+#define DA9063_FLG_FORCE_IN0_MANUAL_MODE 0x0010
+#define DA9063_FLG_FORCE_IN0_AUTO_MODE 0x0020
+#define DA9063_FLG_FORCE_IN1_MANUAL_MODE 0x0040
+#define DA9063_FLG_FORCE_IN1_AUTO_MODE 0x0080
+#define DA9063_FLG_FORCE_IN2_MANUAL_MODE 0x0100
+#define DA9063_FLG_FORCE_IN2_AUTO_MODE 0x0200
+#define DA9063_FLG_FORCE_IN3_MANUAL_MODE 0x0400
+#define DA9063_FLG_FORCE_IN3_AUTO_MODE 0x0800
+
+/* Disable register caching. */
+#define DA9063_FLG_NO_CACHE 0x0008
+
+struct da9063;
+
+/* DA9063 platform data */
+struct da9063_pdata {
+ int (*init)(struct da9063 *da9063);
+ int irq_base;
+ unsigned flags;
+ struct da9063_regulators_pdata *regulators_pdata;
+ struct led_platform_data *leds_pdata;
+};
+
+#endif /* __MFD_DA9063_PDATA_H__ */
projects / linux-beck.git / commitdiff