* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Correct printk whitespace in warning from cpu down task check
sched: Fix incorrect sanity check
sched: Fix fork vs hotplug vs cpuset namespaces
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked. If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass. You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
Here is what a minimal event sequence for a two-finger touch would look
like:
- ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
- ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
the notion of pressure. The fingers of the hand and the palm all have
different characteristic widths [1].
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe a signed quarter
make use of these native identifiers to reduce bandwidth and cpu usage.
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
Notes
-----
function tracer guts
====================
+ By Mike Frysinger
Introduction
------------
unsigned long *frompc = &...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
- prepare_ftrace_return(frompc, selfpc);
+ /* passing frame pointer up is optional -- see below */
+ prepare_ftrace_return(frompc, selfpc, frame_pointer);
/* restore all state needed by the ABI */
}
#endif
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version. The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information). The only architecture-specific piece in it is the setup of
the fault recovery table (the asm(...) code). The rest should be the same
across architectures.
#endif
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function. On exit, the value is compared and if it does not
+match, then it will panic the kernel. This is largely a sanity check for bad
+code generation with gcc. If gcc for your port sanely updates the frame
+pointer under different opitmization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult. In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
HAVE_FTRACE_NMI_ENTER
---------------------
# echo sys_nanosleep hrtimer_interrupt \
> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > tracing_enabled
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <dan.j.williams@intel.com>
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/ioat*
S: Maintained
F: drivers/net/ixp2000/
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
+M: Alex Duyck <alexander.h.duyck@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igb/
+F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
endchoice
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
+source "arch/arm/mach-h720x/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-ixp23xx/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
source "arch/arm/mach-loki/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/mach-s5pc100/Kconfig"
endif
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
source "arch/arm/mach-w90x900/Kconfig"
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
# Definitions to make life easier
config ARCH_ACORN
bool
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_V7)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+ mcr p14, 0, \ch, c0, c5, 0
+ .endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb
.endm
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+ asm(
+ "wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bcs wait \n\
+ mcr p14, 0, %0, c0, c5, 0 "
+ : : "r" (ch));
+}
+
#elif defined(CONFIG_CPU_XSCALE)
static void icedcc_putc(int ch)
#endif
#define putc(ch) icedcc_putc(ch)
-#define flush() do { } while (0)
#endif
static void putstr(const char *ptr)
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
- * flush_cache_kern_all()
+ * flush_kern_all()
*
* Unconditionally clean and invalidate the entire cache.
*
- * flush_cache_user_mm(mm)
+ * flush_user_all()
*
* Clean and invalidate all user space cache entries
* before a change of page tables.
*
- * flush_cache_user_range(start, end, flags)
+ * flush_user_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address space before a change of page tables.
* - start - virtual start address
* - end - virtual end address
*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * flush_kern_dcache_area(kaddr, size)
+ *
+ * Ensure that the data held in page is written back.
+ * - kaddr - page address
+ * - size - region size
+ *
* DMA Cache Coherency
* ===================
*
1002:
.endm
+#elif defined(CONFIG_CPU_V7)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+busy: mrc p14, 0, pc, c0, c1, 0
+ bcs busy
+ .endm
+
+ .macro waituart, rd, rx
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+
+ .endm
+
#elif defined(CONFIG_CPU_XSCALE)
.macro addruart, rx
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
- /*
- * If we have support for OABI programs, we can never allow NX
- * support - our signal syscall restart mechanism relies upon
- * being able to execute code placed on the user stack.
- */
- return 1;
-#else
return 0;
-#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
UART[UART_TX] = c;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
/*
* nothing to do
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
*/
kirkwood_init();
+ orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+ if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+ gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+ pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_sata_init(&rd88f6192_sata_data);
struct mpu_rate * ptr;
unsigned long dpll1_rate, ref_rate;
- dpll1_rate = clk_get_rate(ck_dpll1_p);
- ref_rate = clk_get_rate(ck_ref_p);
+ dpll1_rate = ck_dpll1_p->rate;
+ ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
long highest_rate;
unsigned long ref_rate;
- ref_rate = clk_get_rate(ck_ref_p);
+ ref_rate = ck_ref_p->rate;
highest_rate = -EINVAL;
.name = "dpll4_m3x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
.flags = INVERT_ENABLE,
.name = "dpll4_m6x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
.flags = INVERT_ENABLE,
.name = "iva2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clkdm_name = "iva2_clkdm",
.name = "gfx_l3_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
.recalc = &followparent_recalc,
};
static const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 3, .val = 2, .flags = RATE_IN_4430 },
- { .div = 4, .val = 3, .flags = RATE_IN_4430 },
- { .div = 5, .val = 4, .flags = RATE_IN_4430 },
- { .div = 6, .val = 5, .flags = RATE_IN_4430 },
- { .div = 7, .val = 6, .flags = RATE_IN_4430 },
- { .div = 8, .val = 7, .flags = RATE_IN_4430 },
- { .div = 9, .val = 8, .flags = RATE_IN_4430 },
- { .div = 10, .val = 9, .flags = RATE_IN_4430 },
- { .div = 11, .val = 10, .flags = RATE_IN_4430 },
- { .div = 12, .val = 11, .flags = RATE_IN_4430 },
- { .div = 13, .val = 12, .flags = RATE_IN_4430 },
- { .div = 14, .val = 13, .flags = RATE_IN_4430 },
- { .div = 15, .val = 14, .flags = RATE_IN_4430 },
- { .div = 16, .val = 15, .flags = RATE_IN_4430 },
- { .div = 17, .val = 16, .flags = RATE_IN_4430 },
- { .div = 18, .val = 17, .flags = RATE_IN_4430 },
- { .div = 19, .val = 18, .flags = RATE_IN_4430 },
- { .div = 20, .val = 19, .flags = RATE_IN_4430 },
- { .div = 21, .val = 20, .flags = RATE_IN_4430 },
- { .div = 22, .val = 21, .flags = RATE_IN_4430 },
- { .div = 23, .val = 22, .flags = RATE_IN_4430 },
- { .div = 24, .val = 23, .flags = RATE_IN_4430 },
- { .div = 25, .val = 24, .flags = RATE_IN_4430 },
- { .div = 26, .val = 25, .flags = RATE_IN_4430 },
- { .div = 27, .val = 26, .flags = RATE_IN_4430 },
- { .div = 28, .val = 27, .flags = RATE_IN_4430 },
- { .div = 29, .val = 28, .flags = RATE_IN_4430 },
- { .div = 30, .val = 29, .flags = RATE_IN_4430 },
- { .div = 31, .val = 30, .flags = RATE_IN_4430 },
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+ { .div = 2, .val = 2, .flags = RATE_IN_4430 },
+ { .div = 3, .val = 3, .flags = RATE_IN_4430 },
+ { .div = 4, .val = 4, .flags = RATE_IN_4430 },
+ { .div = 5, .val = 5, .flags = RATE_IN_4430 },
+ { .div = 6, .val = 6, .flags = RATE_IN_4430 },
+ { .div = 7, .val = 7, .flags = RATE_IN_4430 },
+ { .div = 8, .val = 8, .flags = RATE_IN_4430 },
+ { .div = 9, .val = 9, .flags = RATE_IN_4430 },
+ { .div = 10, .val = 10, .flags = RATE_IN_4430 },
+ { .div = 11, .val = 11, .flags = RATE_IN_4430 },
+ { .div = 12, .val = 12, .flags = RATE_IN_4430 },
+ { .div = 13, .val = 13, .flags = RATE_IN_4430 },
+ { .div = 14, .val = 14, .flags = RATE_IN_4430 },
+ { .div = 15, .val = 15, .flags = RATE_IN_4430 },
+ { .div = 16, .val = 16, .flags = RATE_IN_4430 },
+ { .div = 17, .val = 17, .flags = RATE_IN_4430 },
+ { .div = 18, .val = 18, .flags = RATE_IN_4430 },
+ { .div = 19, .val = 19, .flags = RATE_IN_4430 },
+ { .div = 20, .val = 20, .flags = RATE_IN_4430 },
+ { .div = 21, .val = 21, .flags = RATE_IN_4430 },
+ { .div = 22, .val = 22, .flags = RATE_IN_4430 },
+ { .div = 23, .val = 23, .flags = RATE_IN_4430 },
+ { .div = 24, .val = 24, .flags = RATE_IN_4430 },
+ { .div = 25, .val = 25, .flags = RATE_IN_4430 },
+ { .div = 26, .val = 26, .flags = RATE_IN_4430 },
+ { .div = 27, .val = 27, .flags = RATE_IN_4430 },
+ { .div = 28, .val = 28, .flags = RATE_IN_4430 },
+ { .div = 29, .val = 29, .flags = RATE_IN_4430 },
+ { .div = 30, .val = 30, .flags = RATE_IN_4430 },
+ { .div = 31, .val = 31, .flags = RATE_IN_4430 },
{ .div = 0 },
};
local_irq_enable();
local_fiq_enable();
- return (u32)timespec_to_ns(&ts_idle)/1000;
+ return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
/**
BUG();
}
+ clk_enable(gpmc_l3_clk);
+
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
/* Set smart idle mode and automatic L3 clock gating */
u16 hawkeye;
u8 rev;
+ omap_chip.oc = CHIP_IS_OMAP3430;
+
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ break;
+ case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
- omap_revision = OMAP3430_REV_ES3_1;
+ omap_revision = OMAP3430_REV_ES3_1_2;
+
+ /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
+ *
+ * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
+ return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
+ return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
- } else if (cpu_is_omap343x()) {
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (omap_rev() == OMAP3430_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
- omap_rev() <= OMAP3430_REV_ES2_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
- else if (omap_rev() == OMAP3430_REV_ES3_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
- else if (omap_rev() == OMAP3430_REV_ES3_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
- else if (omap_rev() == OMAP3630_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
- } else {
- pr_err("Uninitialized omap_chip, please fix!\n");
+ return;
}
+
+ pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
}
/* MIRs are saved and restore with other PRCM registers */
}
+
+void omap3_intc_suspend(void)
+{
+ /* A pending interrupt would prevent OMAP from entering suspend */
+ omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+ /* Disable autoidle as it can stall interrupt controller */
+ intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+ /* Re-enable autoidle */
+ intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
#endif /* CONFIG_ARCH_OMAP3 */
static unsigned long mux_phys;
static void __iomem *mux_base;
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
{
if (cpu_is_omap24xx())
return __raw_readb(mux_base + reg);
return __raw_readw(mux_base + reg);
}
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
{
if (cpu_is_omap24xx())
__raw_writeb(val, mux_base + reg);
__raw_writew(val, mux_base + reg);
}
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+ while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
+ omap_mux_write(board_mux->value, board_mux->reg_offset);
+ board_mux++;
+ }
+}
+
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
kfree(options);
}
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
- while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
- omap_mux_write(board_mux->value, board_mux->reg_offset);
- board_mux++;
- }
-}
-
static int __init omap_mux_copy_names(struct omap_mux *src,
struct omap_mux *dst)
{
omap_mux_package_fixup(package_subset, superset);
if (package_balls)
omap_mux_package_init_balls(package_balls, superset);
- omap_mux_set_cmdline_signals();
- omap_mux_set_board_signals(board_mux);
#endif
omap_mux_init_list(superset);
+#ifdef CONFIG_OMAP_MUX
+ omap_mux_set_cmdline_signals();
+ omap_mux_write_array(board_mux);
+#endif
+
return 0;
}
*/
void omap_mux_set_gpio(u16 val, int gpio);
+/**
+ * omap_mux_read() - read mux register
+ * @mux_offset: Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val: New mux register value
+ * @mux_offset: Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
- oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+ if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+ oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
}
regs[reg_count++].val = \
__raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
-static int __init pm_dbg_init(void);
-
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
static int pm_dbg_init_done;
+static int __init pm_dbg_init(void);
+
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
static int pwrdm_suspend_get(void *data, u64 *val)
{
- *val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+ int ret;
+ ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+ *val = ret;
- if (*val >= 0)
+ if (ret >= 0)
return 0;
return *val;
}
}
arch_initcall(pm_dbg_init);
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
-#define omap2_pm_dump(mode, resume, us) do {} while (0);
-#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
/* wait for the save to complete */
while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
& PADCONF_SAVE_DONE))
- ;
+ udelay(1);
+
+ /*
+ * Force write last pad into memory, as this can fail in some
+ * cases according to erratas 1.157, 1.185
+ */
+ omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+ OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
/* Save the Interrupt controller context */
omap_intc_save_context();
/* Save the GPMC context */
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
+ omap3_intc_prepare_idle();
/*
* On EMU/HS devices ROM code restores a SRDC value
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
+ omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
}
omap_uart_prepare_suspend();
+ omap3_intc_suspend();
+
omap_sram_idle();
restore:
CM_AUTOIDLE);
}
+ omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
/*
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable PM_WKEN to support DSS LPR */
+ prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- /* Don't attach IVA interrupts */
- prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
- /* Clear any pending 'reset' flags */
- prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
omap3_iva_idle();
omap3_d2d_idle();
}
u32 iva2_cm_clksel2;
u32 cm_sysconfig;
u32 sgx_cm_clksel;
- u32 wkup_cm_clksel;
u32 dss_cm_clksel;
u32 cam_cm_clksel;
u32 per_cm_clksel;
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
- u32 pll_cm_clken;
u32 pll_cm_clken2;
u32 cm_polctrl;
u32 iva2_cm_fclken;
u32 usbhost_cm_iclken;
u32 iva2_cm_autiidle2;
u32 mpu_cm_autoidle2;
- u32 pll_cm_autoidle;
u32 iva2_cm_clkstctrl;
u32 mpu_cm_clkstctrl;
u32 core_cm_clkstctrl;
prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
prcm_context.sgx_cm_clksel =
cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
- prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_context.dss_cm_clksel =
cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
prcm_context.cam_cm_clksel =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
prcm_context.pll_cm_clksel5 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
- prcm_context.pll_cm_clken =
- cm_read_mod_reg(PLL_MOD, CM_CLKEN);
prcm_context.pll_cm_clken2 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
prcm_context.mpu_cm_autoidle2 =
cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
- prcm_context.pll_cm_autoidle =
- cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
prcm_context.iva2_cm_clkstctrl =
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
prcm_context.mpu_cm_clkstctrl =
__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
CM_CLKSEL);
- cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
OMAP3430ES2_CM_CLKSEL4);
cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
OMAP3430ES2_CM_CLKSEL5);
- cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
OMAP3430ES2_CM_CLKEN2);
__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
- cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
#define OMAP44XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
#include "prm44xx.h"
/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#endif
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
- adr r3, write_aux_control_params @ r3 points to parameters
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
-write_aux_control_params:
- .word 0x1, 0x72
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
smi: .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
- mov r0, #0x72
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
+ adds r3, r3, #8
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
save_context_wfi:
/*b save_context_wfi*/ @ enable to debug save code
mov r8, r0 /* Store SDRAM address in r8 */
+ mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
+ mov r4, #0x1 @ Number of parameters for restore call
+ stmia r8!, {r4-r5}
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#define DNS323_GPIO_LED_RIGHT_AMBER 1
#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_SYSTEM_UP 3
#define DNS323_GPIO_LED_POWER 5
#define DNS323_GPIO_OVERTEMP 6
#define DNS323_GPIO_RTC 7
{
.name = "power:blue",
.gpio = DNS323_GPIO_LED_POWER,
- .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
{ 0, MPP_UNUSED },
{ 1, MPP_GPIO }, /* right amber LED (sata ch0) */
{ 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* system up flag */
{ 4, MPP_GPIO }, /* power button LED */
{ 5, MPP_GPIO }, /* power button LED */
{ 6, MPP_GPIO }, /* GMT G751-2f overtemp */
},
};
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
{
pr_info("%s: triggering power-off...\n", __func__);
gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
}
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ /* Pin has to be changed to 1 and back to 0 to do actual power off. */
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+ mdelay(100);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
static void __init dns323_init(void)
{
/* Setup basic Orion functions. Need to be called early. */
if (dns323_dev_id() == MV88F5182_DEV_ID)
orion5x_sata_init(&dns323_sata_data);
- /* register dns323 specific power-off method */
+ /* The 5182 has flag to indicate the system is up. Without this flag
+ * set, power LED will flash and cannot be controlled via leds-gpio.
+ */
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+ /* Register dns323 specific power-off method */
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS323: failed to setup power-off GPIO\n");
- pm_power_off = dns323_power_off;
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ pm_power_off = dns323b_power_off;
+ else
+ pm_power_off = dns323a_power_off;
}
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include "common.h"
#include "mpp.h"
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+ {
+ .name = "wrt350nv2:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:security",
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:orange:power",
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:usb",
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:wireless",
+ .gpio = 7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+ .leds = wrt350n_v2_led_pins,
+ .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wrt350n_v2_led_data,
+ },
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 3,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_WLAN,
+ .gpio = 2,
+ .desc = "WPS Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+ .buttons = wrt350n_v2_buttons,
+ .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &wrt350n_v2_button_data,
+ },
+};
+
+/*
+ * General setup
+ */
static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
{ 0, MPP_GPIO }, /* Power LED green (0=on) */
{ 1, MPP_GPIO }, /* Security LED (0=on) */
orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
+ platform_device_register(&wrt350n_v2_leds);
+ platform_device_register(&wrt350n_v2_button_device);
}
static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ .gpio_vbus = -1,
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
/* USB */
#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif /* CONFIG_CPU_PXA26x */
#endif /* __ASM_ARCH_MFP_PXA25X_H */
saved_icmr[i] = _ICMR(irq);
_ICMR(irq) = 0;
}
- for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = IPR(i);
+
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ saved_ipr[i] = IPR(i);
+ }
return 0;
}
{
int i, irq = PXA_IRQ(0);
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ IPR(i) = saved_ipr[i];
+ }
+
for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
_ICMR(irq) = saved_icmr[i];
_ICLR(irq) = 0;
}
- for (i = 0; i < pxa_internal_irq_nr; i++)
- IPR(i) = saved_ipr[i];
ICCR = 1;
return 0;
return ret;
}
-static int hmt_bl_notify(int brightness)
+static int hmt_bl_notify(struct device *dev, int brightness)
{
/*
* translate from CIELUV/CIELAB L*->brightness, E.G. from
pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
flush_pmd_entry(pmd);
}
+
+ local_flush_tlb_all();
}
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
- *
- * It is assumed that:
*/
.align 5
ENTRY(cpu_v6_reset)
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
- mov pc, lr
+ stmfd sp!, {lr}
+ cpsid if @ disable interrupts
+ bl v7_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
ENDPROC(cpu_v7_proc_fin)
/*
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
- *
- * It is assumed that:
*/
.align 5
ENTRY(cpu_v7_reset)
UART(TXR) = ch;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
#define MX1_UART1_BASE_ADDR 0x00206000
#define MX25_UART1_BASE_ADDR 0x43f90000
clocksource_32k.mult, clocksource_32k.shift);
}
+/**
+ * read_persistent_clock - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+ unsigned long long nsecs;
+ cycles_t delta;
+ struct timespec *tsp = &persistent_ts;
+
+ last_cycles = cycles;
+ cycles = clocksource_32k.read(&clocksource_32k);
+ delta = cycles - last_cycles;
+
+ nsecs = clocksource_cyc2ns(delta,
+ clocksource_32k.mult, clocksource_32k.shift);
+
+ timespec_add_ns(tsp, nsecs);
+ *ts = *tsp;
+}
+
static int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
- (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+ (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
"before unlinking\n");
dump_stack();
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+ /* Readback to make sure write has completed */
+ omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+ /* Ack possibly pending interrupt */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+ OMAP_TIMER_INT_OVERFLOW);
+#endif
}
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
#endif
#include <mach/hardware.h>
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_MISSING (1 << 7)
+#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
size += cs->size;
}
+ /*
+ * Round up 'size' to the nearest power of two.
+ */
+ if ((size & (size - 1)) != 0)
+ size = 1 << fls(size);
+
/*
* Setup BAR[1] to all DRAM banks.
*/
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Thu Jan 28 22:15:54 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
c3ax03 MACH_C3AX03 C3AX03 2549
mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
esyx MACH_ESYX ESYX 2551
+dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552
bulldog MACH_BULLDOG BULLDOG 2553
derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554
bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555
cezanne MACH_CEZANNE CEZANNE 2569
lucca MACH_LUCCA LUCCA 2570
supersmart MACH_SUPERSMART SUPERSMART 2571
+arm11_board MACH_CS_MISANO CS_MISANO 2572
magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573
emxx MACH_EMXX EMXX 2574
outlaw MACH_OUTLAW OUTLAW 2575
phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593
omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594
pca101 MACH_PCA101 PCA101 2595
+buzzc MACH_BUZZC BUZZC 2596
+sasie2 MACH_SASIE2 SASIE2 2597
+davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598
+smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599
+wzl6410 MACH_WZL6410 WZL6410 2600
+wzl6410m MACH_WZL6410M WZL6410M 2601
+wzl6410f MACH_WZL6410F WZL6410F 2602
+wzl6410i MACH_WZL6410I WZL6410I 2603
+spacecom1 MACH_SPACECOM1 SPACECOM1 2604
+pingu920 MACH_PINGU920 PINGU920 2605
+bravoc MACH_BRAVOC BRAVOC 2606
+cybo2440 MACH_CYBO2440 CYBO2440 2607
+vdssw MACH_VDSSW VDSSW 2608
+romulus MACH_ROMULUS ROMULUS 2609
+omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610
+eltd100 MACH_ELTD100 ELTD100 2611
+capc7117 MACH_CAPC7117 CAPC7117 2612
+swan MACH_SWAN SWAN 2613
+veu MACH_VEU VEU 2614
+rm2 MACH_RM2 RM2 2615
+tt2100 MACH_TT2100 TT2100 2616
+venice MACH_VENICE VENICE 2617
+pc7323 MACH_PC7323 PC7323 2618
+masp MACH_MASP MASP 2619
+fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620
+fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621
+lexikon MACH_LEXIKON LEXIKON 2622
+mini2440v2 MACH_MINI2440V2 MINI2440V2 2623
+icontrol MACH_ICONTROL ICONTROL 2624
+sheevad MACH_SHEEVAD SHEEVAD 2625
+qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626
+qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627
+bee MACH_BEE BEE 2628
+mx23evk MACH_MX23EVK MX23EVK 2629
+ap4evb MACH_AP4EVB AP4EVB 2630
+stockholm MACH_STOCKHOLM STOCKHOLM 2631
+lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632
+stingray MACH_STINGRAY STINGRAY 2633
+kraken MACH_KRAKEN KRAKEN 2634
+gw2388 MACH_GW2388 GW2388 2635
+jadecpu MACH_JADECPU JADECPU 2636
+carlisle MACH_CARLISLE CARLISLE 2637
+lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638
+nemid_tb MACH_NEMID_TB NEMID_TB 2639
+terrier MACH_TERRIER TERRIER 2640
+turbot MACH_TURBOT TURBOT 2641
+sanddab MACH_SANDDAB SANDDAB 2642
+mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643
+ghi2703d MACH_GHI2703D GHI2703D 2644
+lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645
+lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646
+lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647
+hw90240 MACH_HW90240 HW90240 2648
+dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
+mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
+scat110 MACH_SCAT110 SCAT110 2651
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
config SYS_SUPPORTS_ZBOOT_UART16550
bool
# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
-VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
-VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))))
+VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
+# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE"
+HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10)))
+LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8)
+VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32))))
# set the default size of the mallocing area for decompressing
BOOT_HEAP_SIZE := 0x400000
suffix_$(CONFIG_KERNEL_GZIP) = gz
suffix_$(CONFIG_KERNEL_BZIP2) = bz2
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix_$(CONFIG_KERNEL_LZO) = lzo
tool_$(CONFIG_KERNEL_GZIP) = gzip
tool_$(CONFIG_KERNEL_BZIP2) = bzip2
tool_$(CONFIG_KERNEL_LZMA) = lzma
+tool_$(CONFIG_KERNEL_LZO) = lzo
$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
$(call if_changed,$(tool_y))
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
void decompress_kernel(unsigned long boot_heap_start)
{
int zimage_size;
#define CP0_LEGACY_COMPARE_IRQ 7
extern int cp0_compare_irq;
+extern int cp0_compare_irq_shift;
extern int cp0_perfcount_irq;
#endif /* _ASM_IRQ_H */
--- /dev/null
+/*
+ * asic_reg_map.h
+ *
+ * A macro-enclosed list of the elements for the register_map structure for
+ * use in defining and manipulating the structure.
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
+REGISTER_MAP_ELEMENT(eic_cfg_bits)
+REGISTER_MAP_ELEMENT(eic_ready_status)
+REGISTER_MAP_ELEMENT(chipver3)
+REGISTER_MAP_ELEMENT(chipver2)
+REGISTER_MAP_ELEMENT(chipver1)
+REGISTER_MAP_ELEMENT(chipver0)
+REGISTER_MAP_ELEMENT(uart1_intstat)
+REGISTER_MAP_ELEMENT(uart1_inten)
+REGISTER_MAP_ELEMENT(uart1_config1)
+REGISTER_MAP_ELEMENT(uart1_config2)
+REGISTER_MAP_ELEMENT(uart1_divisorhi)
+REGISTER_MAP_ELEMENT(uart1_divisorlo)
+REGISTER_MAP_ELEMENT(uart1_data)
+REGISTER_MAP_ELEMENT(uart1_status)
+REGISTER_MAP_ELEMENT(int_stat_3)
+REGISTER_MAP_ELEMENT(int_stat_2)
+REGISTER_MAP_ELEMENT(int_stat_1)
+REGISTER_MAP_ELEMENT(int_stat_0)
+REGISTER_MAP_ELEMENT(int_config)
+REGISTER_MAP_ELEMENT(int_int_scan)
+REGISTER_MAP_ELEMENT(ien_int_3)
+REGISTER_MAP_ELEMENT(ien_int_2)
+REGISTER_MAP_ELEMENT(ien_int_1)
+REGISTER_MAP_ELEMENT(ien_int_0)
+REGISTER_MAP_ELEMENT(int_level_3_3)
+REGISTER_MAP_ELEMENT(int_level_3_2)
+REGISTER_MAP_ELEMENT(int_level_3_1)
+REGISTER_MAP_ELEMENT(int_level_3_0)
+REGISTER_MAP_ELEMENT(int_level_2_3)
+REGISTER_MAP_ELEMENT(int_level_2_2)
+REGISTER_MAP_ELEMENT(int_level_2_1)
+REGISTER_MAP_ELEMENT(int_level_2_0)
+REGISTER_MAP_ELEMENT(int_level_1_3)
+REGISTER_MAP_ELEMENT(int_level_1_2)
+REGISTER_MAP_ELEMENT(int_level_1_1)
+REGISTER_MAP_ELEMENT(int_level_1_0)
+REGISTER_MAP_ELEMENT(int_level_0_3)
+REGISTER_MAP_ELEMENT(int_level_0_2)
+REGISTER_MAP_ELEMENT(int_level_0_1)
+REGISTER_MAP_ELEMENT(int_level_0_0)
+REGISTER_MAP_ELEMENT(int_docsis_en)
+REGISTER_MAP_ELEMENT(mips_pll_setup)
+REGISTER_MAP_ELEMENT(usb_fs)
+REGISTER_MAP_ELEMENT(test_bus)
+REGISTER_MAP_ELEMENT(crt_spare)
+REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
+REGISTER_MAP_ELEMENT(usb2_strap)
+REGISTER_MAP_ELEMENT(ehci_hcapbase)
+REGISTER_MAP_ELEMENT(ohci_hc_revision)
+REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
+REGISTER_MAP_ELEMENT(usb2_control)
+REGISTER_MAP_ELEMENT(usb2_stbus_obc)
+REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
+REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
+REGISTER_MAP_ELEMENT(pcie_regs)
+REGISTER_MAP_ELEMENT(tim_ch)
+REGISTER_MAP_ELEMENT(tim_cl)
+REGISTER_MAP_ELEMENT(gpio_dout)
+REGISTER_MAP_ELEMENT(gpio_din)
+REGISTER_MAP_ELEMENT(gpio_dir)
+REGISTER_MAP_ELEMENT(watchdog)
+REGISTER_MAP_ELEMENT(front_panel)
+REGISTER_MAP_ELEMENT(misc_clk_ctl1)
+REGISTER_MAP_ELEMENT(misc_clk_ctl2)
+REGISTER_MAP_ELEMENT(crt_ext_ctl)
+REGISTER_MAP_ELEMENT(register_maps)
#define CRONUS_11 0x0B4C1C21
#define CRONUSLITE_10 0x0B4C1C40
-#define NAND_FLASH_BASE 0x03000000
-#define ZEUS_IO_BASE 0x09000000
+#define NAND_FLASH_BASE 0x03000000
#define CALLIOPE_IO_BASE 0x08000000
-#define CRONUS_IO_BASE 0x09000000
-#define ASIC_IO_SIZE 0x01000000
+#define CRONUS_IO_BASE 0x09000000
+#define ZEUS_IO_BASE 0x09000000
+
+#define ASIC_IO_SIZE 0x01000000
/* Definitions for backward compatibility */
#define UART1_INTSTAT uart1_intstat
#define UART1_STATUS uart1_status
/* ASIC register enumeration */
+union register_map_entry {
+ unsigned long phys;
+ u32 *virt;
+};
+
+#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
struct register_map {
- u32 eic_slow0_strt_add;
- u32 eic_cfg_bits;
- u32 eic_ready_status;
-
- u32 chipver3;
- u32 chipver2;
- u32 chipver1;
- u32 chipver0;
-
- u32 uart1_intstat;
- u32 uart1_inten;
- u32 uart1_config1;
- u32 uart1_config2;
- u32 uart1_divisorhi;
- u32 uart1_divisorlo;
- u32 uart1_data;
- u32 uart1_status;
-
- u32 int_stat_3;
- u32 int_stat_2;
- u32 int_stat_1;
- u32 int_stat_0;
- u32 int_config;
- u32 int_int_scan;
- u32 ien_int_3;
- u32 ien_int_2;
- u32 ien_int_1;
- u32 ien_int_0;
- u32 int_level_3_3;
- u32 int_level_3_2;
- u32 int_level_3_1;
- u32 int_level_3_0;
- u32 int_level_2_3;
- u32 int_level_2_2;
- u32 int_level_2_1;
- u32 int_level_2_0;
- u32 int_level_1_3;
- u32 int_level_1_2;
- u32 int_level_1_1;
- u32 int_level_1_0;
- u32 int_level_0_3;
- u32 int_level_0_2;
- u32 int_level_0_1;
- u32 int_level_0_0;
- u32 int_docsis_en;
-
- u32 mips_pll_setup;
- u32 usb_fs;
- u32 test_bus;
- u32 crt_spare;
- u32 usb2_ohci_int_mask;
- u32 usb2_strap;
- u32 ehci_hcapbase;
- u32 ohci_hc_revision;
- u32 bcm1_bs_lmi_steer;
- u32 usb2_control;
- u32 usb2_stbus_obc;
- u32 usb2_stbus_mess_size;
- u32 usb2_stbus_chunk_size;
-
- u32 pcie_regs;
- u32 tim_ch;
- u32 tim_cl;
- u32 gpio_dout;
- u32 gpio_din;
- u32 gpio_dir;
- u32 watchdog;
- u32 front_panel;
-
- u32 register_maps;
+#include <asm/mach-powertv/asic_reg_map.h>
};
+#undef REGISTER_MAP_ELEMENT
+
+/**
+ * register_map_offset_phys - add an offset to the physical address
+ * @map: Pointer to the &struct register_map
+ * @offset: Value to add
+ *
+ * Only adds the base to non-zero physical addresses
+ */
+static inline void register_map_offset_phys(struct register_map *map,
+ unsigned long offset)
+{
+#define REGISTER_MAP_ELEMENT(x) do { \
+ if (map->x.phys != 0) \
+ map->x.phys += offset; \
+ } while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
+
+/**
+ * register_map_virtualize - Convert ®ister_map to virtual addresses
+ * @map: Pointer to ®ister_map to virtualize
+ */
+static inline void register_map_virtualize(struct register_map *map)
+{
+#define REGISTER_MAP_ELEMENT(x) do { \
+ map->x.virt = (!map->x.phys) ? NULL : \
+ UNCAC_ADDR(phys_to_virt(map->x.phys)); \
+ } while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
-extern enum asic_type asic;
-extern const struct register_map *register_map;
-extern unsigned long asic_phy_base; /* Physical address of ASIC */
-extern unsigned long asic_base; /* Virtual address of ASIC */
+extern struct register_map _asic_register_map;
/*
* Macros to interface to registers through their ioremapped address
- * asic_reg_offset Returns the offset of a given register from the start
- * of the ASIC address space
* asic_reg_phys_addr Returns the physical address of the given register
* asic_reg_addr Returns the iomapped virtual address of the given
* register.
*/
-#define asic_reg_offset(x) (register_map->x)
-#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x))
-#define asic_reg_addr(x) \
- ((unsigned int *) (asic_base + asic_reg_offset(x)))
+#define asic_reg_addr(x) (_asic_register_map.x.virt)
+#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \
+ (unsigned long) asic_reg_addr(x))))
/*
* The asic_reg macro is gone. It should be replaced by either asic_read or
#define ST0_CU3 0x80000000
#define ST0_XX 0x80000000 /* MIPS IV naming */
+/*
+ * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define INTCTLB_IPPCI 26
+#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI)
+#define INTCTLB_IPTI 29
+#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI)
+
/*
* Bitfields and bit numbers in the coprocessor 0 cause register.
*
#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
#define CAUSEF_CE (_ULCAST_(3) << 28)
+#define CAUSEB_TI 30
+#define CAUSEF_TI (_ULCAST_(1) << 30)
#define CAUSEB_BD 31
#define CAUSEF_BD (_ULCAST_(1) << 31)
*/
static int c0_compare_int_pending(void)
{
- return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
}
/*
* Timer interrupt
*/
int cp0_compare_irq;
+int cp0_compare_irq_shift;
/*
* Performance counter IRQ or -1 if shared with timer
* o read IntCtl.IPPCI to determine the performance counter interrupt
*/
if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+ cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
} else {
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map calliope_register_map = {
- .eic_slow0_strt_add = 0x800000,
- .eic_cfg_bits = 0x800038,
- .eic_ready_status = 0x80004c,
+#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
- .chipver3 = 0xA00800,
- .chipver2 = 0xA00804,
- .chipver1 = 0xA00808,
- .chipver0 = 0xA0080c,
+const struct register_map calliope_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
+ .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
+ .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
+
+ .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
+ .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
+ .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
+ .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
/* The registers of IRBlaster */
- .uart1_intstat = 0xA01800,
- .uart1_inten = 0xA01804,
- .uart1_config1 = 0xA01808,
- .uart1_config2 = 0xA0180C,
- .uart1_divisorhi = 0xA01810,
- .uart1_divisorlo = 0xA01814,
- .uart1_data = 0xA01818,
- .uart1_status = 0xA0181C,
+ .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
+ .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
+ .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
+ .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
+ .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
+ .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
+ .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
+ .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
- .int_stat_3 = 0xA02800,
- .int_stat_2 = 0xA02804,
- .int_stat_1 = 0xA02808,
- .int_stat_0 = 0xA0280c,
- .int_config = 0xA02810,
- .int_int_scan = 0xA02818,
- .ien_int_3 = 0xA02830,
- .ien_int_2 = 0xA02834,
- .ien_int_1 = 0xA02838,
- .ien_int_0 = 0xA0283c,
- .int_level_3_3 = 0xA02880,
- .int_level_3_2 = 0xA02884,
- .int_level_3_1 = 0xA02888,
- .int_level_3_0 = 0xA0288c,
- .int_level_2_3 = 0xA02890,
- .int_level_2_2 = 0xA02894,
- .int_level_2_1 = 0xA02898,
- .int_level_2_0 = 0xA0289c,
- .int_level_1_3 = 0xA028a0,
- .int_level_1_2 = 0xA028a4,
- .int_level_1_1 = 0xA028a8,
- .int_level_1_0 = 0xA028ac,
- .int_level_0_3 = 0xA028b0,
- .int_level_0_2 = 0xA028b4,
- .int_level_0_1 = 0xA028b8,
- .int_level_0_0 = 0xA028bc,
- .int_docsis_en = 0xA028F4,
+ .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
+ .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
+ .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
+ .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
+ .int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
+ .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
+ .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
+ .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
+ .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
+ .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
+ .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
+ .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
+ .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
+ .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
+ .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
+ .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
+ .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
+ .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
+ .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
+ .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
+ .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
+ .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
+ .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
+ .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
+ .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
+ .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
+ .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
- .mips_pll_setup = 0x980000,
- .usb_fs = 0x980030, /* -default 72800028- */
- .test_bus = 0x9800CC,
- .crt_spare = 0x9800d4,
- .usb2_ohci_int_mask = 0x9A000c,
- .usb2_strap = 0x9A0014,
- .ehci_hcapbase = 0x9BFE00,
- .ohci_hc_revision = 0x9BFC00,
- .bcm1_bs_lmi_steer = 0x9E0004,
- .usb2_control = 0x9E0054,
- .usb2_stbus_obc = 0x9BFF00,
- .usb2_stbus_mess_size = 0x9BFF04,
- .usb2_stbus_chunk_size = 0x9BFF08,
+ .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
+ .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)},
+ .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
+ .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
+ .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
+ .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
+ .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
+ .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
+ .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
+ .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
+ .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
+ .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
+ .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
- .pcie_regs = 0x000000, /* -doesn't exist- */
- .tim_ch = 0xA02C10,
- .tim_cl = 0xA02C14,
- .gpio_dout = 0xA02c20,
- .gpio_din = 0xA02c24,
- .gpio_dir = 0xA02c2C,
- .watchdog = 0xA02c30,
- .front_panel = 0x000000, /* -not used- */
+ .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */
+ .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
+ .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
+ .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
+ .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
+ .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
+ .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
+ .front_panel = {.phys = 0x000000}, /* -not used- */
};
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map cronus_register_map = {
- .eic_slow0_strt_add = 0x000000,
- .eic_cfg_bits = 0x000038,
- .eic_ready_status = 0x00004C,
+#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
- .chipver3 = 0x2A0800,
- .chipver2 = 0x2A0804,
- .chipver1 = 0x2A0808,
- .chipver0 = 0x2A080C,
+const struct register_map cronus_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
+ .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
+ .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
+
+ .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
+ .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
+ .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
+ .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
/* The registers of IRBlaster */
- .uart1_intstat = 0x2A1800,
- .uart1_inten = 0x2A1804,
- .uart1_config1 = 0x2A1808,
- .uart1_config2 = 0x2A180C,
- .uart1_divisorhi = 0x2A1810,
- .uart1_divisorlo = 0x2A1814,
- .uart1_data = 0x2A1818,
- .uart1_status = 0x2A181C,
+ .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
+ .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
+ .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
+ .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
+ .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
+ .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
+ .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
+ .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
- .int_stat_3 = 0x2A2800,
- .int_stat_2 = 0x2A2804,
- .int_stat_1 = 0x2A2808,
- .int_stat_0 = 0x2A280C,
- .int_config = 0x2A2810,
- .int_int_scan = 0x2A2818,
- .ien_int_3 = 0x2A2830,
- .ien_int_2 = 0x2A2834,
- .ien_int_1 = 0x2A2838,
- .ien_int_0 = 0x2A283C,
- .int_level_3_3 = 0x2A2880,
- .int_level_3_2 = 0x2A2884,
- .int_level_3_1 = 0x2A2888,
- .int_level_3_0 = 0x2A288C,
- .int_level_2_3 = 0x2A2890,
- .int_level_2_2 = 0x2A2894,
- .int_level_2_1 = 0x2A2898,
- .int_level_2_0 = 0x2A289C,
- .int_level_1_3 = 0x2A28A0,
- .int_level_1_2 = 0x2A28A4,
- .int_level_1_1 = 0x2A28A8,
- .int_level_1_0 = 0x2A28AC,
- .int_level_0_3 = 0x2A28B0,
- .int_level_0_2 = 0x2A28B4,
- .int_level_0_1 = 0x2A28B8,
- .int_level_0_0 = 0x2A28BC,
- .int_docsis_en = 0x2A28F4,
+ .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
+ .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
+ .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
+ .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
+ .int_config = {.phys = CRONUS_ADDR(0x2A2810)},
+ .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
+ .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
+ .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
+ .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
+ .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
+ .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
+ .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
+ .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
+ .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
+ .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
+ .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
+ .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
+ .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
+ .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
+ .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
+ .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
+ .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
+ .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
+ .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
+ .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
+ .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
+ .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
- .mips_pll_setup = 0x1C0000,
- .usb_fs = 0x1C0018,
- .test_bus = 0x1C00CC,
- .crt_spare = 0x1c00d4,
- .usb2_ohci_int_mask = 0x20000C,
- .usb2_strap = 0x200014,
- .ehci_hcapbase = 0x21FE00,
- .ohci_hc_revision = 0x1E0000,
- .bcm1_bs_lmi_steer = 0x2E0008,
- .usb2_control = 0x2E004C,
- .usb2_stbus_obc = 0x21FF00,
- .usb2_stbus_mess_size = 0x21FF04,
- .usb2_stbus_chunk_size = 0x21FF08,
+ .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
+ .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)},
+ .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
+ .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
+ .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
+ .usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
+ .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
+ .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)},
+ .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
+ .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
+ .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
+ .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
+ .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
- .pcie_regs = 0x220000,
- .tim_ch = 0x2A2C10,
- .tim_cl = 0x2A2C14,
- .gpio_dout = 0x2A2C20,
- .gpio_din = 0x2A2C24,
- .gpio_dir = 0x2A2C2C,
- .watchdog = 0x2A2C30,
- .front_panel = 0x2A3800,
+ .pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
+ .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
+ .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
+ .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
+ .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
+ .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
+ .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
+ .front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
};
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map zeus_register_map = {
- .eic_slow0_strt_add = 0x000000,
- .eic_cfg_bits = 0x000038,
- .eic_ready_status = 0x00004c,
+#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
- .chipver3 = 0x280800,
- .chipver2 = 0x280804,
- .chipver1 = 0x280808,
- .chipver0 = 0x28080c,
+const struct register_map zeus_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
+ .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
+ .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
+
+ .chipver3 = {.phys = ZEUS_ADDR(0x280800)},
+ .chipver2 = {.phys = ZEUS_ADDR(0x280804)},
+ .chipver1 = {.phys = ZEUS_ADDR(0x280808)},
+ .chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
/* The registers of IRBlaster */
- .uart1_intstat = 0x281800,
- .uart1_inten = 0x281804,
- .uart1_config1 = 0x281808,
- .uart1_config2 = 0x28180C,
- .uart1_divisorhi = 0x281810,
- .uart1_divisorlo = 0x281814,
- .uart1_data = 0x281818,
- .uart1_status = 0x28181C,
+ .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
+ .uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
+ .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
+ .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
+ .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
+ .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
+ .uart1_data = {.phys = ZEUS_ADDR(0x281818)},
+ .uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
- .int_stat_3 = 0x282800,
- .int_stat_2 = 0x282804,
- .int_stat_1 = 0x282808,
- .int_stat_0 = 0x28280c,
- .int_config = 0x282810,
- .int_int_scan = 0x282818,
- .ien_int_3 = 0x282830,
- .ien_int_2 = 0x282834,
- .ien_int_1 = 0x282838,
- .ien_int_0 = 0x28283c,
- .int_level_3_3 = 0x282880,
- .int_level_3_2 = 0x282884,
- .int_level_3_1 = 0x282888,
- .int_level_3_0 = 0x28288c,
- .int_level_2_3 = 0x282890,
- .int_level_2_2 = 0x282894,
- .int_level_2_1 = 0x282898,
- .int_level_2_0 = 0x28289c,
- .int_level_1_3 = 0x2828a0,
- .int_level_1_2 = 0x2828a4,
- .int_level_1_1 = 0x2828a8,
- .int_level_1_0 = 0x2828ac,
- .int_level_0_3 = 0x2828b0,
- .int_level_0_2 = 0x2828b4,
- .int_level_0_1 = 0x2828b8,
- .int_level_0_0 = 0x2828bc,
- .int_docsis_en = 0x2828F4,
+ .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
+ .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
+ .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
+ .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
+ .int_config = {.phys = ZEUS_ADDR(0x282810)},
+ .int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
+ .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
+ .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
+ .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
+ .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
+ .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
+ .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
+ .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
+ .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
+ .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
+ .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
+ .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
+ .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
+ .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
+ .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
+ .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
+ .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
+ .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
+ .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
+ .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
+ .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
+ .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
- .mips_pll_setup = 0x1a0000,
- .usb_fs = 0x1a0018,
- .test_bus = 0x1a0238,
- .crt_spare = 0x1a0090,
- .usb2_ohci_int_mask = 0x1e000c,
- .usb2_strap = 0x1e0014,
- .ehci_hcapbase = 0x1FFE00,
- .ohci_hc_revision = 0x1FFC00,
- .bcm1_bs_lmi_steer = 0x2C0008,
- .usb2_control = 0x2c01a0,
- .usb2_stbus_obc = 0x1FFF00,
- .usb2_stbus_mess_size = 0x1FFF04,
- .usb2_stbus_chunk_size = 0x1FFF08,
+ .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
+ .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)},
+ .test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
+ .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
+ .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
+ .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
+ .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
+ .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
+ .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
+ .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
+ .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
+ .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
+ .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
- .pcie_regs = 0x200000,
- .tim_ch = 0x282C10,
- .tim_cl = 0x282C14,
- .gpio_dout = 0x282c20,
- .gpio_din = 0x282c24,
- .gpio_dir = 0x282c2C,
- .watchdog = 0x282c30,
- .front_panel = 0x283800,
+ .pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
+ .tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
+ .tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
+ .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
+ .gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
+ .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
+ .watchdog = {.phys = ZEUS_ADDR(0x282c30)},
+ .front_panel = {.phys = ZEUS_ADDR(0x283800)},
};
unsigned int platform_features;
unsigned int platform_family;
-const struct register_map *register_map;
-EXPORT_SYMBOL(register_map); /* Exported for testing */
+struct register_map _asic_register_map;
+EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */
unsigned long asic_phy_base;
unsigned long asic_base;
EXPORT_SYMBOL(asic_base); /* Exported for testing */
{
}
+static void __init set_register_map(unsigned long phys_base,
+ const struct register_map *map)
+{
+ asic_phy_base = phys_base;
+ _asic_register_map = *map;
+ register_map_virtualize(&_asic_register_map);
+ asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
+}
+
/**
* configure_platform - configuration based on platform type.
*/
case FAMILY_1500VZF:
platform_features = FFS_CAPABLE;
asic = ASIC_CALLIOPE;
- asic_phy_base = CALLIOPE_IO_BASE;
- register_map = &calliope_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
if (platform_family == FAMILY_1500VZE) {
gp_resources = non_dvr_vze_calliope_resources;
platform_features = FFS_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
- asic_phy_base = ZEUS_IO_BASE;
- register_map = &zeus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(ZEUS_IO_BASE, &zeus_register_map);
gp_resources = non_dvr_zeus_resources;
pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
/* The settop has PCIE but it isn't used, so don't advertise
* it*/
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
- asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */
- register_map = &cronus_register_map; /* same as Cronus */
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
- gp_resources = non_dvr_cronuslite_resources;
/* ASIC version will determine if this is a real CronusLite or
* Castrati(Cronus) */
else
asic = ASIC_CRONUSLITE;
+ /* Cronus and Cronus Lite have the same register map */
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+ gp_resources = non_dvr_cronuslite_resources;
pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
"chipversion=0x%08X\n",
(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
case FAMILY_4600VZA:
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
- asic_phy_base = CRONUS_IO_BASE;
- register_map = &cronus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = non_dvr_cronus_resources;
pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
- asic_phy_base = ZEUS_IO_BASE;
- register_map = &zeus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(ZEUS_IO_BASE, &zeus_register_map);
gp_resources = dvr_zeus_resources;
pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
- asic_phy_base = CRONUS_IO_BASE;
- register_map = &cronus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = dvr_cronus_resources;
pr_info("Platform: 8600/Vz Class B - CRONUS, "
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:33:07 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
CONFIG_ACADIA=y
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:48 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:37:34 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
CONFIG_EP405=y
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:45:11 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
CONFIG_HCU4=y
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 13:28:37 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:51:23 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
CONFIG_KILAUEA=y
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun 3 09:11:02 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:55:12 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
CONFIG_MAKALU=y
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:57 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:56:30 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
CONFIG_WALNUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug 13 14:14:07 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:02:35 2010
#
# CONFIG_PPC64 is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:33 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:09:03 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 17:27:20 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:12:20 2010
#
# CONFIG_PPC64 is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_CANYONLANDS=y
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:20:46 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Wed Aug 19 13:06:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:33:04 2010
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:38 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:55:34 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:41 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:59:12 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_PPC_EARLY_DEBUG_44x=y
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Feb 4 14:31:09 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:05:05 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
CONFIG_REDWOOD=y
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:42 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:11:24 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Apr 7 17:04:52 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:15:51 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:47 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:21:04 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 9 23:35:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:27:46 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_XILINX_SYSACE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_PIKASD=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_GPIO_PLATFORM is not set
CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:44:03 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 13:54:06 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_ACADIA=y
CONFIG_EP405=y
CONFIG_HCU4=y
+CONFIG_HOTFOOT=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
CONFIG_WALNUT=y
CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
CONFIG_PPC40x_SIMPLE=y
CONFIG_405GP=y
+CONFIG_405EP=y
CONFIG_405EX=y
CONFIG_405EZ=y
CONFIG_405GPR=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:43:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 13:42:17 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_ARCHES=y
CONFIG_CANYONLANDS=y
CONFIG_GLACIER=y
+CONFIG_REDWOOD=y
+CONFIG_EIGER=y
CONFIG_YOSEMITE=y
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_XILINX_ML510 is not set
CONFIG_PPC44x_SIMPLE=y
CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_440GX=y
CONFIG_440SPe=y
CONFIG_460EX=y
+CONFIG_460SX=y
CONFIG_IBM440EP_ERR42=y
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
#ifdef __powerpc64__
# define SET_PERSONALITY(ex) \
do { \
- unsigned long new_flags = 0; \
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- new_flags = _TIF_32BIT; \
- if ((current_thread_info()->flags & _TIF_32BIT) \
- != new_flags) \
- set_thread_flag(TIF_ABI_PENDING); \
+ set_thread_flag(TIF_32BIT); \
else \
- clear_thread_flag(TIF_ABI_PENDING); \
+ clear_thread_flag(TIF_32BIT); \
if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX | \
(current->personality & (~PER_MASK))); \
#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */
#define TIF_FREEZE 14 /* Freezing for suspend */
#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */
-#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
{
struct pci_dev *dev;
const char *type;
+ struct pci_slot *slot;
dev = alloc_pci_dev();
if (!dev)
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->needs_freset = 0; /* pcie fundamental reset required */
+ set_pcie_port_type(dev);
+
+ list_for_each_entry(slot, &dev->bus->slots, list)
+ if (PCI_SLOT(dev->devfn) == slot->number)
+ dev->slot = slot;
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
+ /* Early fixups, before probing the BARs */
+ pci_fixup_device(pci_fixup_early, dev);
+
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
+ set_pcie_hotplug_bridge(dev);
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
void flush_thread(void)
{
-#ifdef CONFIG_PPC64
- struct thread_info *t = current_thread_info();
-
- if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
- clear_ti_thread_flag(t, TIF_ABI_PENDING);
- if (test_ti_thread_flag(t, TIF_32BIT))
- clear_ti_thread_flag(t, TIF_32BIT);
- else
- set_ti_thread_flag(t, TIF_32BIT);
- }
-#endif
-
discard_lazy_cpu_state();
if (current->thread.dabr) {
config KVM_EXIT_TIMING
bool "Detailed exit timing"
- depends on KVM
+ depends on KVM_440 || KVM_E500
---help---
Calculate elapsed time for every exit/enter cycle. A per-vcpu
report is available in debugfs kvm/vm#_vcpu#_timing.
return default_server;
}
#else
-static int get_irq_server(unsigned int virq, cpumask_t cpumask,
- unsigned int strict_check)
-{
- return default_server;
-}
+#define get_irq_server(virq, cpumask, strict_check) (default_server)
#endif
static void xics_unmask_irq(unsigned int virq)
hose->last_busno = bus_range ? bus_range[1] : 0xff;
/* Setup config space */
- setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+ PPC_INDIRECT_TYPE_SET_CFG_TYPE);
/* Disable all windows */
writel(0, reg + PCIX0_POM0SA);
/*
- * include/asm-s390/irqflags.h
- *
- * Copyright (C) IBM Corp. 2006
- * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Copyright IBM Corp. 2006,2010
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#ifndef __ASM_IRQFLAGS_H
#define __ASM_IRQFLAGS_H
-#ifdef __KERNEL__
+#include <linux/types.h>
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
/* For spinlocks etc */
#define raw_local_irq_save(x) ((x) = raw_local_irq_disable())
-#endif /* __KERNEL__ */
#endif /* __ASM_IRQFLAGS_H */
mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
+ lm %r2,%r6,SP_R2(%r15) # load svc arguments
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
b BASED(sysc_do_svc)
mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
+ lmg %r2,%r6,SP_R2(%r15) # load svc arguments
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
j sysc_do_svc
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return rc2;
}
-static const intercept_handler_t intercept_funcs[0x48 >> 2] = {
+static const intercept_handler_t intercept_funcs[] = {
[0x00 >> 2] = handle_noop,
[0x04 >> 2] = handle_instruction,
[0x08 >> 2] = handle_prog,
intercept_handler_t func;
u8 code = vcpu->arch.sie_block->icptcode;
- if (code & 3 || code > 0x48)
+ if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs))
return -ENOTSUPP;
func = intercept_funcs[code >> 2];
if (func)
while (t--) {
if (!ctrl_inw(EEPROM_STAT))
return 1;
- cpu_relax();
+ udelay(1);
}
printk(KERN_ERR "ms7724se can not access to eeprom\n");
#define __NR_pwritev 334
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
-#define __NR_recvmmsg 337
-#define NR_syscalls 338
+#define NR_syscalls 337
#ifdef __KERNEL__
+#define __IGNORE_recvmmsg
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __NR_rt_tgsigqueueinfo 363
#define __NR_perf_event_open 364
#define __NR_recvmmsg 365
+#define __NR_accept4 366
#ifdef __KERNEL__
-#define NR_syscalls 366
+#define NR_syscalls 367
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
void flush_thread(void)
{
- /* Called by fs/exec.c (flush_old_exec) to remove traces of a
+ /* Called by fs/exec.c (setup_new_exec) to remove traces of a
* previously running executable. */
#ifdef CONFIG_SH_FPU
if (last_task_used_math == current) {
.long sys_pwritev
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
- .long sys_recvmmsg
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
.long sys_recvmmsg /* 365 */
+ .long sys_accept4
default 64 if SPARC64
config GENERIC_TIME
+ def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
bool
- default y if SPARC64
+ default y if SPARC32
config GENERIC_CMOS_UPDATE
bool
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Wed Sep 16 00:03:43 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 11 23:20:31 2010
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Tue Sep 15 17:06:03 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan 20 16:31:47 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
-CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_SMP=y
+CONFIG_EARLYFB=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
CONFIG_SECCOMP=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SUNVDC=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
+# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_ULTRA45 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
#define ELF_PLATFORM (NULL)
#define SET_PERSONALITY(ex) \
-do { unsigned long new_flags = current_thread_info()->flags; \
- new_flags &= _TIF_32BIT; \
- if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- new_flags |= _TIF_32BIT; \
+do { if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ set_thread_flag(TIF_32BIT); \
else \
- new_flags &= ~_TIF_32BIT; \
- if ((current_thread_info()->flags & _TIF_32BIT) \
- != new_flags) \
- set_thread_flag(TIF_ABI_PENDING); \
- else \
- clear_thread_flag(TIF_ABI_PENDING); \
+ clear_thread_flag(TIF_32BIT); \
/* flush_thread will update pgd cache */ \
if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX | \
#include <asm/page.h> /* IO address mapping routines need this */
#include <asm/system.h>
-#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
static inline u32 flip_dword (u32 l)
{
#define phys_to_virt __va
#define ARCH_PFN_OFFSET (pfn_base)
-#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
#ifndef _ASMSPARC_PARAM_H
#define _ASMSPARC_PARAM_H
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
+#include <asm-generic/param.h>
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif
+#endif /* _ASMSPARC_PARAM_H */
#define TIF_SECCOMP 9 /* secure computing */
#define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */
#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
-/* flag bit 11 is available */
/* NOTE: Thread flags >= 12 should be ones we have no interest
* in using in assembly, else we can't use the mask as
* an immediate value in instructions such as andcc.
*/
-#define TIF_ABI_PENDING 12
+/* flag bit 12 is available */
#define TIF_MEMDIE 13
#define TIF_POLLING_NRFLAG 14
#define TIF_FREEZE 15 /* is freezing for suspend */
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1<<TIF_FREEZE)
typedef unsigned long cycles_t;
#define get_cycles() (0)
+extern u32 (*do_arch_gettimeoffset)(void);
#endif
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &numa_cpumask_lookup_table[node])
struct pci_bus;
#ifdef CONFIG_PCI
if (unlikely(sz != -1 && sz < n)) {
copy_from_user_overflow();
- return -EFAULT;
+ return n;
}
if (n && __access_ok((unsigned long) from, n))
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long size)
{
- unsigned long ret = (unsigned long) -EFAULT;
int sz = __compiletime_object_size(to);
+ unsigned long ret = size;
if (likely(sz == -1 || sz >= size)) {
ret = ___copy_from_user(to, from, size);
p->leds_resource.start = (unsigned long)
(p->clock_regs + CLOCK_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-clockboard-leds";
if (!p->central) {
p->leds_resource.start = (unsigned long)
(p->pregs + FHC_PREGS_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-fhc-leds";
};
#ifdef CONFIG_SMP
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity)
{
cpumask_t mask;
int cpuid;
- cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+ cpumask_copy(&mask, affinity);
if (cpus_equal(mask, cpu_online_map)) {
cpuid = map_to_cpu(virt_irq);
} else {
return cpuid;
}
#else
-static int irq_choose_cpu(unsigned int virt_irq)
-{
- return real_hard_smp_processor_id();
-}
+#define irq_choose_cpu(virt_irq, affinity) \
+ real_hard_smp_processor_id()
#endif
static void sun4u_irq_enable(unsigned int virt_irq)
unsigned long cpuid, imap, val;
unsigned int tid;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq,
+ irq_desc[virt_irq].affinity);
imap = data->imap;
tid = sun4u_compute_tid(imap, cpuid);
static int sun4u_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
- sun4u_irq_enable(virt_irq);
+ struct irq_handler_data *data = get_irq_chip_data(virt_irq);
+
+ if (likely(data)) {
+ unsigned long cpuid, imap, val;
+ unsigned int tid;
+
+ cpuid = irq_choose_cpu(virt_irq, mask);
+ imap = data->imap;
+
+ tid = sun4u_compute_tid(imap, cpuid);
+
+ val = upa_readq(imap);
+ val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
+ IMAP_AID_SAFARI | IMAP_NID_SAFARI);
+ val |= tid | IMAP_VALID;
+ upa_writeq(val, imap);
+ upa_writeq(ICLR_IDLE, data->iclr);
+ }
return 0;
}
static void sun4v_irq_enable(unsigned int virt_irq)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
- unsigned long cpuid = irq_choose_cpu(virt_irq);
+ unsigned long cpuid = irq_choose_cpu(virt_irq,
+ irq_desc[virt_irq].affinity);
int err;
err = sun4v_intr_settarget(ino, cpuid);
const struct cpumask *mask)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
- unsigned long cpuid = irq_choose_cpu(virt_irq);
+ unsigned long cpuid = irq_choose_cpu(virt_irq, mask);
int err;
err = sun4v_intr_settarget(ino, cpuid);
unsigned long cpuid, dev_handle, dev_ino;
int err;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq, irq_desc[virt_irq].affinity);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
unsigned long cpuid, dev_handle, dev_ino;
int err;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq, mask);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/pcic.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
volatile int pcic_speculative;
volatile int pcic_trapped;
-static void pci_do_gettimeofday(struct timeval *tv);
-static int pci_do_settimeofday(struct timespec *tv);
#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */
#define TICK_TIMER_LIMIT ((100*1000000/4)/100)
+u32 pci_gettimeoffset(void)
+{
+ /*
+ * We divide all by 100
+ * to have microsecond resolution and to avoid overflow
+ */
+ unsigned long count =
+ readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+ count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
+ return count * 1000;
+}
+
+
void __init pci_time_init(void)
{
struct linux_pcic *pcic = &pcic0;
unsigned long v;
int timer_irq, irq;
- /* A hack until do_gettimeofday prototype is moved to arch specific headers
- and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
- ((unsigned int *)do_gettimeofday)[0] =
- 0x10800000 | ((((unsigned long)pci_do_gettimeofday -
- (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
- ((unsigned int *)do_gettimeofday)[1] = 0x01000000;
- BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
+ do_arch_gettimeoffset = pci_gettimeoffset;
+
btfixup();
writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
local_irq_enable();
}
-static inline unsigned long do_gettimeoffset(void)
-{
- /*
- * We divide all by 100
- * to have microsecond resolution and to avoid overflow
- */
- unsigned long count =
- readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
- count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
- return count;
-}
-
-static void pci_do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-static int pci_do_settimeofday(struct timespec *tv)
-{
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- tv->tv_nsec -= 1000 * do_gettimeoffset();
- while (tv->tv_nsec < 0) {
- tv->tv_nsec += NSEC_PER_SEC;
- tv->tv_sec--;
- }
-
- wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
- wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
-
- if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
- wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
- wall_to_monotonic.tv_sec++;
- }
- if (wall_to_monotonic.tv_nsec < 0) {
- wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
- wall_to_monotonic.tv_sec--;
- }
-
- xtime.tv_sec = tv->tv_sec;
- xtime.tv_nsec = tv->tv_nsec;
- ntp_clear();
- return 0;
-}
#if 0
static void watchdog_reset() {
/* Performance event support for sparc64.
*
- * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2009, 2010 David S. Miller <davem@davemloft.net>
*
* This code is based almost entirely upon the x86 perf event
* code, which is:
#include <linux/kdebug.h>
#include <linux/mutex.h>
+#include <asm/stacktrace.h>
#include <asm/cpudata.h>
+#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <asm/nmi.h>
#include <asm/pcr.h>
+#include "kstack.h"
+
/* Sparc64 chips have two performance counters, 32-bits each, with
* overflow interrupts generated on transition from 0xffffffff to 0.
* The counters are accessed in one go using a 64-bit register.
#define PIC_UPPER_INDEX 0
#define PIC_LOWER_INDEX 1
+#define PIC_NO_INDEX -1
struct cpu_hw_events {
- struct perf_event *events[MAX_HWEVENTS];
- unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+ /* Number of events currently scheduled onto this cpu.
+ * This tells how many entries in the arrays below
+ * are valid.
+ */
+ int n_events;
+
+ /* Number of new events added since the last hw_perf_disable().
+ * This works because the perf event layer always adds new
+ * events inside of a perf_{disable,enable}() sequence.
+ */
+ int n_added;
+
+ /* Array of events current scheduled on this cpu. */
+ struct perf_event *event[MAX_HWEVENTS];
+
+ /* Array of encoded longs, specifying the %pcr register
+ * encoding and the mask of PIC counters this even can
+ * be scheduled on. See perf_event_encode() et al.
+ */
+ unsigned long events[MAX_HWEVENTS];
+
+ /* The current counter index assigned to an event. When the
+ * event hasn't been programmed into the cpu yet, this will
+ * hold PIC_NO_INDEX. The event->hw.idx value tells us where
+ * we ought to schedule the event.
+ */
+ int current_idx[MAX_HWEVENTS];
+
+ /* Software copy of %pcr register on this cpu. */
u64 pcr;
+
+ /* Enabled/disable state. */
int enabled;
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
+/* An event map describes the characteristics of a performance
+ * counter event. In particular it gives the encoding as well as
+ * a mask telling which counters the event can be measured on.
+ */
struct perf_event_map {
u16 encoding;
u8 pic_mask;
#define PIC_LOWER 0x02
};
+/* Encode a perf_event_map entry into a long. */
static unsigned long perf_event_encode(const struct perf_event_map *pmap)
{
return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
}
-static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+static u8 perf_event_get_msk(unsigned long val)
{
- *msk = val & 0xff;
- *enc = val >> 16;
+ return val & 0xff;
+}
+
+static u64 perf_event_get_enc(unsigned long val)
+{
+ return val >> 16;
}
#define C(x) PERF_COUNT_HW_CACHE_##x
pcr_ops->write(cpuc->pcr);
}
-void hw_perf_enable(void)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- u64 val;
- int i;
-
- if (cpuc->enabled)
- return;
-
- cpuc->enabled = 1;
- barrier();
-
- val = cpuc->pcr;
-
- for (i = 0; i < MAX_HWEVENTS; i++) {
- struct perf_event *cp = cpuc->events[i];
- struct hw_perf_event *hwc;
-
- if (!cp)
- continue;
- hwc = &cp->hw;
- val |= hwc->config_base;
- }
-
- cpuc->pcr = val;
-
- pcr_ops->write(cpuc->pcr);
-}
-
-void hw_perf_disable(void)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- u64 val;
-
- if (!cpuc->enabled)
- return;
-
- cpuc->enabled = 0;
-
- val = cpuc->pcr;
- val &= ~(PCR_UTRACE | PCR_STRACE |
- sparc_pmu->hv_bit | sparc_pmu->irq_bit);
- cpuc->pcr = val;
-
- pcr_ops->write(cpuc->pcr);
-}
-
static u32 read_pmc(int idx)
{
u64 val;
write_pic(pic);
}
+static u64 sparc_perf_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc, int idx)
+{
+ int shift = 64 - 32;
+ u64 prev_raw_count, new_raw_count;
+ s64 delta;
+
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = read_pmc(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &event->count);
+ atomic64_sub(delta, &hwc->period_left);
+
+ return new_raw_count;
+}
+
static int sparc_perf_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
return ret;
}
-static int sparc_pmu_enable(struct perf_event *event)
+/* If performance event entries have been added, move existing
+ * events around (if necessary) and then assign new entries to
+ * counters.
+ */
+static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
+ int i;
- if (test_and_set_bit(idx, cpuc->used_mask))
- return -EAGAIN;
+ if (!cpuc->n_added)
+ goto out;
- sparc_pmu_disable_event(cpuc, hwc, idx);
+ /* Read in the counters which are moving. */
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *cp = cpuc->event[i];
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ if (cpuc->current_idx[i] != PIC_NO_INDEX &&
+ cpuc->current_idx[i] != cp->hw.idx) {
+ sparc_perf_event_update(cp, &cp->hw,
+ cpuc->current_idx[i]);
+ cpuc->current_idx[i] = PIC_NO_INDEX;
+ }
+ }
- sparc_perf_event_set_period(event, hwc, idx);
- sparc_pmu_enable_event(cpuc, hwc, idx);
- perf_event_update_userpage(event);
- return 0;
+ /* Assign to counters all unassigned events. */
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *cp = cpuc->event[i];
+ struct hw_perf_event *hwc = &cp->hw;
+ int idx = hwc->idx;
+ u64 enc;
+
+ if (cpuc->current_idx[i] != PIC_NO_INDEX)
+ continue;
+
+ sparc_perf_event_set_period(cp, hwc, idx);
+ cpuc->current_idx[i] = idx;
+
+ enc = perf_event_get_enc(cpuc->events[i]);
+ pcr |= event_encoding(enc, idx);
+ }
+out:
+ return pcr;
}
-static u64 sparc_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
+void hw_perf_enable(void)
{
- int shift = 64 - 32;
- u64 prev_raw_count, new_raw_count;
- s64 delta;
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ u64 pcr;
-again:
- prev_raw_count = atomic64_read(&hwc->prev_count);
- new_raw_count = read_pmc(idx);
+ if (cpuc->enabled)
+ return;
- if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
+ cpuc->enabled = 1;
+ barrier();
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
+ pcr = cpuc->pcr;
+ if (!cpuc->n_events) {
+ pcr = 0;
+ } else {
+ pcr = maybe_change_configuration(cpuc, pcr);
- atomic64_add(delta, &event->count);
- atomic64_sub(delta, &hwc->period_left);
+ /* We require that all of the events have the same
+ * configuration, so just fetch the settings from the
+ * first entry.
+ */
+ cpuc->pcr = pcr | cpuc->event[0]->hw.config_base;
+ }
- return new_raw_count;
+ pcr_ops->write(cpuc->pcr);
+}
+
+void hw_perf_disable(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ cpuc->n_added = 0;
+
+ val = cpuc->pcr;
+ val &= ~(PCR_UTRACE | PCR_STRACE |
+ sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
static void sparc_pmu_disable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
+ unsigned long flags;
+ int i;
- clear_bit(idx, cpuc->active_mask);
- sparc_pmu_disable_event(cpuc, hwc, idx);
+ local_irq_save(flags);
+ perf_disable();
+
+ for (i = 0; i < cpuc->n_events; i++) {
+ if (event == cpuc->event[i]) {
+ int idx = cpuc->current_idx[i];
+
+ /* Shift remaining entries down into
+ * the existing slot.
+ */
+ while (++i < cpuc->n_events) {
+ cpuc->event[i - 1] = cpuc->event[i];
+ cpuc->events[i - 1] = cpuc->events[i];
+ cpuc->current_idx[i - 1] =
+ cpuc->current_idx[i];
+ }
+
+ /* Absorb the final count and turn off the
+ * event.
+ */
+ sparc_pmu_disable_event(cpuc, hwc, idx);
+ barrier();
+ sparc_perf_event_update(event, hwc, idx);
- barrier();
+ perf_event_update_userpage(event);
- sparc_perf_event_update(event, hwc, idx);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ cpuc->n_events--;
+ break;
+ }
+ }
- perf_event_update_userpage(event);
+ perf_enable();
+ local_irq_restore(flags);
+}
+
+static int active_event_index(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ int i;
+
+ for (i = 0; i < cpuc->n_events; i++) {
+ if (cpuc->event[i] == event)
+ break;
+ }
+ BUG_ON(i == cpuc->n_events);
+ return cpuc->current_idx[i];
}
static void sparc_pmu_read(struct perf_event *event)
{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int idx = active_event_index(cpuc, event);
struct hw_perf_event *hwc = &event->hw;
- sparc_perf_event_update(event, hwc, hwc->idx);
+ sparc_perf_event_update(event, hwc, idx);
}
static void sparc_pmu_unthrottle(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int idx = active_event_index(cpuc, event);
struct hw_perf_event *hwc = &event->hw;
- sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
+ sparc_pmu_enable_event(cpuc, hwc, idx);
}
static atomic_t active_events = ATOMIC_INIT(0);
/* Make sure all events can be scheduled into the hardware at
* the same time. This is simplified by the fact that we only
* need to support 2 simultaneous HW events.
+ *
+ * As a side effect, the evts[]->hw.idx values will be assigned
+ * on success. These are pending indexes. When the events are
+ * actually programmed into the chip, these values will propagate
+ * to the per-cpu cpuc->current_idx[] slots, see the code in
+ * maybe_change_configuration() for details.
*/
-static int sparc_check_constraints(unsigned long *events, int n_ev)
+static int sparc_check_constraints(struct perf_event **evts,
+ unsigned long *events, int n_ev)
{
- if (n_ev <= perf_max_events) {
- u8 msk1, msk2;
- u16 dummy;
-
- if (n_ev == 1)
- return 0;
- BUG_ON(n_ev != 2);
- perf_event_decode(events[0], &dummy, &msk1);
- perf_event_decode(events[1], &dummy, &msk2);
-
- /* If both events can go on any counter, OK. */
- if (msk1 == (PIC_UPPER | PIC_LOWER) &&
- msk2 == (PIC_UPPER | PIC_LOWER))
- return 0;
-
- /* If one event is limited to a specific counter,
- * and the other can go on both, OK.
- */
- if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
- msk2 == (PIC_UPPER | PIC_LOWER))
- return 0;
- if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
- msk1 == (PIC_UPPER | PIC_LOWER))
- return 0;
-
- /* If the events are fixed to different counters, OK. */
- if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
- (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
- return 0;
-
- /* Otherwise, there is a conflict. */
+ u8 msk0 = 0, msk1 = 0;
+ int idx0 = 0;
+
+ /* This case is possible when we are invoked from
+ * hw_perf_group_sched_in().
+ */
+ if (!n_ev)
+ return 0;
+
+ if (n_ev > perf_max_events)
+ return -1;
+
+ msk0 = perf_event_get_msk(events[0]);
+ if (n_ev == 1) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
}
+ BUG_ON(n_ev != 2);
+ msk1 = perf_event_get_msk(events[1]);
+
+ /* If both events can go on any counter, OK. */
+ if (msk0 == (PIC_UPPER | PIC_LOWER) &&
+ msk1 == (PIC_UPPER | PIC_LOWER))
+ goto success;
+ /* If one event is limited to a specific counter,
+ * and the other can go on both, OK.
+ */
+ if ((msk0 == PIC_UPPER || msk0 == PIC_LOWER) &&
+ msk1 == (PIC_UPPER | PIC_LOWER)) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
+ }
+
+ if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+ msk0 == (PIC_UPPER | PIC_LOWER)) {
+ if (msk1 & PIC_UPPER)
+ idx0 = 1;
+ goto success;
+ }
+
+ /* If the events are fixed to different counters, OK. */
+ if ((msk0 == PIC_UPPER && msk1 == PIC_LOWER) ||
+ (msk0 == PIC_LOWER && msk1 == PIC_UPPER)) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
+ }
+
+ /* Otherwise, there is a conflict. */
return -1;
+
+success:
+ evts[0]->hw.idx = idx0;
+ if (n_ev == 2)
+ evts[1]->hw.idx = idx0 ^ 1;
+ return 0;
}
static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
}
static int collect_events(struct perf_event *group, int max_count,
- struct perf_event *evts[], unsigned long *events)
+ struct perf_event *evts[], unsigned long *events,
+ int *current_idx)
{
struct perf_event *event;
int n = 0;
if (n >= max_count)
return -1;
evts[n] = group;
- events[n++] = group->hw.event_base;
+ events[n] = group->hw.event_base;
+ current_idx[n++] = PIC_NO_INDEX;
}
list_for_each_entry(event, &group->sibling_list, group_entry) {
if (!is_software_event(event) &&
if (n >= max_count)
return -1;
evts[n] = event;
- events[n++] = event->hw.event_base;
+ events[n] = event->hw.event_base;
+ current_idx[n++] = PIC_NO_INDEX;
}
}
return n;
}
+static void event_sched_in(struct perf_event *event, int cpu)
+{
+ event->state = PERF_EVENT_STATE_ACTIVE;
+ event->oncpu = cpu;
+ event->tstamp_running += event->ctx->time - event->tstamp_stopped;
+ if (is_software_event(event))
+ event->pmu->enable(event);
+}
+
+int hw_perf_group_sched_in(struct perf_event *group_leader,
+ struct perf_cpu_context *cpuctx,
+ struct perf_event_context *ctx, int cpu)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct perf_event *sub;
+ int n0, n;
+
+ if (!sparc_pmu)
+ return 0;
+
+ n0 = cpuc->n_events;
+ n = collect_events(group_leader, perf_max_events - n0,
+ &cpuc->event[n0], &cpuc->events[n0],
+ &cpuc->current_idx[n0]);
+ if (n < 0)
+ return -EAGAIN;
+ if (check_excludes(cpuc->event, n0, n))
+ return -EINVAL;
+ if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0))
+ return -EAGAIN;
+ cpuc->n_events = n0 + n;
+ cpuc->n_added += n;
+
+ cpuctx->active_oncpu += n;
+ n = 1;
+ event_sched_in(group_leader, cpu);
+ list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
+ if (sub->state != PERF_EVENT_STATE_OFF) {
+ event_sched_in(sub, cpu);
+ n++;
+ }
+ }
+ ctx->nr_active += n;
+
+ return 1;
+}
+
+static int sparc_pmu_enable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int n0, ret = -EAGAIN;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ perf_disable();
+
+ n0 = cpuc->n_events;
+ if (n0 >= perf_max_events)
+ goto out;
+
+ cpuc->event[n0] = event;
+ cpuc->events[n0] = event->hw.event_base;
+ cpuc->current_idx[n0] = PIC_NO_INDEX;
+
+ if (check_excludes(cpuc->event, n0, 1))
+ goto out;
+ if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1))
+ goto out;
+
+ cpuc->n_events++;
+ cpuc->n_added++;
+
+ ret = 0;
+out:
+ perf_enable();
+ local_irq_restore(flags);
+ return ret;
+}
+
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct perf_event *evts[MAX_HWEVENTS];
struct hw_perf_event *hwc = &event->hw;
unsigned long events[MAX_HWEVENTS];
+ int current_idx_dmy[MAX_HWEVENTS];
const struct perf_event_map *pmap;
- u64 enc;
int n;
if (atomic_read(&nmi_active) < 0)
} else
return -EOPNOTSUPP;
- /* We save the enable bits in the config_base. So to
- * turn off sampling just write 'config', and to enable
- * things write 'config | config_base'.
- */
+ /* We save the enable bits in the config_base. */
hwc->config_base = sparc_pmu->irq_bit;
if (!attr->exclude_user)
hwc->config_base |= PCR_UTRACE;
hwc->event_base = perf_event_encode(pmap);
- enc = pmap->encoding;
-
n = 0;
if (event->group_leader != event) {
n = collect_events(event->group_leader,
perf_max_events - 1,
- evts, events);
+ evts, events, current_idx_dmy);
if (n < 0)
return -EINVAL;
}
if (check_excludes(evts, n, 1))
return -EINVAL;
- if (sparc_check_constraints(events, n + 1))
+ if (sparc_check_constraints(evts, events, n + 1))
return -EINVAL;
+ hwc->idx = PIC_NO_INDEX;
+
/* Try to do all error checking before this point, as unwinding
* state after grabbing the PMC is difficult.
*/
atomic64_set(&hwc->period_left, hwc->sample_period);
}
- if (pmap->pic_mask & PIC_UPPER) {
- hwc->idx = PIC_UPPER_INDEX;
- enc <<= sparc_pmu->upper_shift;
- } else {
- hwc->idx = PIC_LOWER_INDEX;
- enc <<= sparc_pmu->lower_shift;
- }
-
- hwc->config |= enc;
return 0;
}
struct perf_sample_data data;
struct cpu_hw_events *cpuc;
struct pt_regs *regs;
- int idx;
+ int i;
if (!atomic_read(&active_events))
return NOTIFY_DONE;
if (sparc_pmu->irq_bit)
pcr_ops->write(cpuc->pcr);
- for (idx = 0; idx < MAX_HWEVENTS; idx++) {
- struct perf_event *event = cpuc->events[idx];
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *event = cpuc->event[i];
+ int idx = cpuc->current_idx[i];
struct hw_perf_event *hwc;
u64 val;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
hwc = &event->hw;
val = sparc_perf_event_update(event, hwc, idx);
if (val & (1ULL << 31))
pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
- /* All sparc64 PMUs currently have 2 events. But this simple
- * driver only supports one active event at a time.
- */
- perf_max_events = 1;
+ /* All sparc64 PMUs currently have 2 events. */
+ perf_max_events = 2;
register_die_notifier(&perf_event_nmi_notifier);
}
+
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+ if (entry->nr < PERF_MAX_STACK_DEPTH)
+ entry->ip[entry->nr++] = ip;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ksp, fp;
+
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ callchain_store(entry, regs->tpc);
+
+ ksp = regs->u_regs[UREG_I6];
+ fp = ksp + STACK_BIAS;
+ do {
+ struct sparc_stackf *sf;
+ struct pt_regs *regs;
+ unsigned long pc;
+
+ if (!kstack_valid(current_thread_info(), fp))
+ break;
+
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
+
+ if (kstack_is_trap_frame(current_thread_info(), regs)) {
+ if (user_mode(regs))
+ break;
+ pc = regs->tpc;
+ fp = regs->u_regs[UREG_I6] + STACK_BIAS;
+ } else {
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
+ }
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ufp;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, regs->tpc);
+
+ ufp = regs->u_regs[UREG_I6] + STACK_BIAS;
+ do {
+ struct sparc_stackf *usf, sf;
+ unsigned long pc;
+
+ usf = (struct sparc_stackf *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp + STACK_BIAS;
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ufp;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, regs->tpc);
+
+ ufp = regs->u_regs[UREG_I6];
+ do {
+ struct sparc_stackf32 *usf, sf;
+ unsigned long pc;
+
+ usf = (struct sparc_stackf32 *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp;
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+/* Like powerpc we can't get PMU interrupts within the PMU handler,
+ * so no need for seperate NMI and IRQ chains as on x86.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+ entry->nr = 0;
+ if (!user_mode(regs)) {
+ stack_trace_flush();
+ perf_callchain_kernel(regs, entry);
+ if (current->mm)
+ regs = task_pt_regs(current);
+ else
+ regs = NULL;
+ }
+ if (regs) {
+ flushw_user();
+ if (test_thread_flag(TIF_32BIT))
+ perf_callchain_user_32(regs, entry);
+ else
+ perf_callchain_user_64(regs, entry);
+ }
+ return entry;
+}
struct thread_info *t = current_thread_info();
struct mm_struct *mm;
- if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
- clear_ti_thread_flag(t, TIF_ABI_PENDING);
- if (test_ti_thread_flag(t, TIF_32BIT))
- clear_ti_thread_flag(t, TIF_32BIT);
- else
- set_ti_thread_flag(t, TIF_32BIT);
- }
-
mm = t->task->mm;
if (mm)
tsb_context_switch(mm);
void arch_pick_mmap_layout(struct mm_struct *mm)
{
unsigned long random_factor = 0UL;
+ unsigned long gap;
if (current->flags & PF_RANDOMIZE) {
random_factor = get_random_int();
* Fall back to the standard layout if the personality
* bit is set, or if the expected stack growth is unlimited:
*/
+ gap = rlimit(RLIMIT_STACK);
if (!test_thread_flag(TIF_32BIT) ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
- current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY ||
+ gap == RLIM_INFINITY ||
sysctl_legacy_va_layout) {
mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
mm->get_unmapped_area = arch_get_unmapped_area;
} else {
/* We know it's 32-bit */
unsigned long task_size = STACK_TOP32;
- unsigned long gap;
- gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
if (gap < 128 * 1024 * 1024)
gap = 128 * 1024 * 1024;
if (gap > (task_size / 6 * 5))
#include <linux/platform_device.h>
#include <asm/oplib.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/system.h>
#include <asm/irq.h>
EXPORT_SYMBOL(rtc_lock);
static int set_rtc_mmss(unsigned long);
-static int sbus_do_settimeofday(struct timespec *tv);
unsigned long profile_pc(struct pt_regs *regs)
{
__volatile__ unsigned int *master_l10_counter;
+u32 (*do_arch_gettimeoffset)(void);
+
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
-
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
-static void __init sbus_time_init(void)
-{
-
- BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
- btfixup();
-
- sparc_init_timers(timer_interrupt);
-}
-
-void __init time_init(void)
-{
-#ifdef CONFIG_PCI
- extern void pci_time_init(void);
- if (pcic_present()) {
- pci_time_init();
- return;
- }
-#endif
- sbus_time_init();
-}
-static inline unsigned long do_gettimeoffset(void)
+u32 sbus_do_gettimeoffset(void)
{
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
if (val & 0x80000000)
usec += 1000000 / HZ;
- return usec;
+ return usec * 1000;
}
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
+u32 arch_gettimeoffset(void)
{
- int ret;
-
- write_seqlock_irq(&xtime_lock);
- ret = bus_do_settimeofday(tv);
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return ret;
+ if (unlikely(!do_arch_gettimeoffset))
+ return 0;
+ return do_arch_gettimeoffset();
}
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
+static void __init sbus_time_init(void)
{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
+ do_arch_gettimeoffset = sbus_do_gettimeoffset;
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * do_gettimeoffset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+ btfixup();
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+ sparc_init_timers(timer_interrupt);
+}
- ntp_clear();
- return 0;
+void __init time_init(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_time_init(void);
+ if (pcic_present()) {
+ pci_time_init();
+ return;
+ }
+#endif
+ sbus_time_init();
}
+
static int set_rtc_mmss(unsigned long secs)
{
struct rtc_device *rtc = rtc_class_open("rtc0");
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
if (in_atomic() || !mm)
goto no_context;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
down_read(&mm->mmap_sem);
/*
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
- else
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
current->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
if (in_atomic() || !mm)
goto intr_or_no_mm;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
- else
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
current->min_flt++;
-
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
mm_rss = get_mm_rss(mm);
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-config X86_CPU_DEBUG
- tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
- ---help---
- If you select this option, this will provide various x86 CPUs
- information through debugfs.
-
choice
prompt "High Memory Support"
default HIGHMEM4G if !X86_NUMAQ
if (retval)
return retval;
- regs->cs = __USER32_CS;
- regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
- regs->r13 = regs->r14 = regs->r15 = 0;
-
/* OK, This is the point of no return */
set_personality(PER_LINUX);
set_thread_flag(TIF_IA32);
- clear_thread_flag(TIF_ABI_PENDING);
+
+ setup_new_exec(bprm);
+
+ regs->cs = __USER32_CS;
+ regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
+ regs->r13 = regs->r14 = regs->r15 = 0;
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
extern int amd_iommu_init_devices(void);
extern void amd_iommu_uninit_devices(void);
extern void amd_iommu_init_notifier(void);
+extern void amd_iommu_init_api(void);
#ifndef CONFIG_AMD_IOMMU_STATS
static inline void amd_iommu_stats_init(void) { }
+++ /dev/null
-#ifndef _ASM_X86_CPU_DEBUG_H
-#define _ASM_X86_CPU_DEBUG_H
-
-/*
- * CPU x86 architecture debug
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- */
-
-/* Register flags */
-enum cpu_debug_bit {
-/* Model Specific Registers (MSRs) */
- CPU_MC_BIT, /* Machine Check */
- CPU_MONITOR_BIT, /* Monitor */
- CPU_TIME_BIT, /* Time */
- CPU_PMC_BIT, /* Performance Monitor */
- CPU_PLATFORM_BIT, /* Platform */
- CPU_APIC_BIT, /* APIC */
- CPU_POWERON_BIT, /* Power-on */
- CPU_CONTROL_BIT, /* Control */
- CPU_FEATURES_BIT, /* Features control */
- CPU_LBRANCH_BIT, /* Last Branch */
- CPU_BIOS_BIT, /* BIOS */
- CPU_FREQ_BIT, /* Frequency */
- CPU_MTTR_BIT, /* MTRR */
- CPU_PERF_BIT, /* Performance */
- CPU_CACHE_BIT, /* Cache */
- CPU_SYSENTER_BIT, /* Sysenter */
- CPU_THERM_BIT, /* Thermal */
- CPU_MISC_BIT, /* Miscellaneous */
- CPU_DEBUG_BIT, /* Debug */
- CPU_PAT_BIT, /* PAT */
- CPU_VMX_BIT, /* VMX */
- CPU_CALL_BIT, /* System Call */
- CPU_BASE_BIT, /* BASE Address */
- CPU_VER_BIT, /* Version ID */
- CPU_CONF_BIT, /* Configuration */
- CPU_SMM_BIT, /* System mgmt mode */
- CPU_SVM_BIT, /*Secure Virtual Machine*/
- CPU_OSVM_BIT, /* OS-Visible Workaround*/
-/* Standard Registers */
- CPU_TSS_BIT, /* Task Stack Segment */
- CPU_CR_BIT, /* Control Registers */
- CPU_DT_BIT, /* Descriptor Table */
-/* End of Registers flags */
- CPU_REG_ALL_BIT, /* Select all Registers */
-};
-
-#define CPU_REG_ALL (~0) /* Select all Registers */
-
-#define CPU_MC (1 << CPU_MC_BIT)
-#define CPU_MONITOR (1 << CPU_MONITOR_BIT)
-#define CPU_TIME (1 << CPU_TIME_BIT)
-#define CPU_PMC (1 << CPU_PMC_BIT)
-#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT)
-#define CPU_APIC (1 << CPU_APIC_BIT)
-#define CPU_POWERON (1 << CPU_POWERON_BIT)
-#define CPU_CONTROL (1 << CPU_CONTROL_BIT)
-#define CPU_FEATURES (1 << CPU_FEATURES_BIT)
-#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT)
-#define CPU_BIOS (1 << CPU_BIOS_BIT)
-#define CPU_FREQ (1 << CPU_FREQ_BIT)
-#define CPU_MTRR (1 << CPU_MTTR_BIT)
-#define CPU_PERF (1 << CPU_PERF_BIT)
-#define CPU_CACHE (1 << CPU_CACHE_BIT)
-#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT)
-#define CPU_THERM (1 << CPU_THERM_BIT)
-#define CPU_MISC (1 << CPU_MISC_BIT)
-#define CPU_DEBUG (1 << CPU_DEBUG_BIT)
-#define CPU_PAT (1 << CPU_PAT_BIT)
-#define CPU_VMX (1 << CPU_VMX_BIT)
-#define CPU_CALL (1 << CPU_CALL_BIT)
-#define CPU_BASE (1 << CPU_BASE_BIT)
-#define CPU_VER (1 << CPU_VER_BIT)
-#define CPU_CONF (1 << CPU_CONF_BIT)
-#define CPU_SMM (1 << CPU_SMM_BIT)
-#define CPU_SVM (1 << CPU_SVM_BIT)
-#define CPU_OSVM (1 << CPU_OSVM_BIT)
-#define CPU_TSS (1 << CPU_TSS_BIT)
-#define CPU_CR (1 << CPU_CR_BIT)
-#define CPU_DT (1 << CPU_DT_BIT)
-
-/* Register file flags */
-enum cpu_file_bit {
- CPU_INDEX_BIT, /* index */
- CPU_VALUE_BIT, /* value */
-};
-
-#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT)
-
-#define MAX_CPU_FILES 512
-
-struct cpu_private {
- unsigned cpu;
- unsigned type;
- unsigned reg;
- unsigned file;
-};
-
-struct cpu_debug_base {
- char *name; /* Register name */
- unsigned flag; /* Register flag */
- unsigned write; /* Register write flag */
-};
-
-/*
- * Currently it looks similar to cpu_debug_base but once we add more files
- * cpu_file_base will go in different direction
- */
-struct cpu_file_base {
- char *name; /* Register file name */
- unsigned flag; /* Register file flag */
- unsigned write; /* Register write flag */
-};
-
-struct cpu_cpuX_base {
- struct dentry *dentry; /* Register dentry */
- int init; /* Register index file */
-};
-
-struct cpu_debug_range {
- unsigned min; /* Register range min */
- unsigned max; /* Register range max */
- unsigned flag; /* Supported flags */
-};
-
-#endif /* _ASM_X86_CPU_DEBUG_H */
void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp);
#define compat_start_thread start_thread_ia32
-#define COMPAT_SET_PERSONALITY(ex) \
-do { \
- if (test_thread_flag(TIF_IA32)) \
- clear_thread_flag(TIF_ABI_PENDING); \
- else \
- set_thread_flag(TIF_ABI_PENDING); \
- current->personality |= force_personality32; \
-} while (0)
+void set_personality_ia32(void);
+#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32()
#define COMPAT_ELF_PLATFORM ("i686")
extern unsigned long force_hpet_address;
extern u8 hpet_blockid;
extern int hpet_force_user;
+extern u8 hpet_msi_disable;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
extern void hpet_disable(void);
enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
struct microcode_ops {
- void (*init)(struct device *device);
- void (*fini)(void);
enum ucode_state (*request_microcode_user) (int cpu,
const void __user *buf, size_t size);
#define MSR_ARCH_PERFMON_EVENTSEL1 0x187
#define ARCH_PERFMON_EVENTSEL0_ENABLE (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ANY (1 << 21)
#define ARCH_PERFMON_EVENTSEL_INT (1 << 20)
#define ARCH_PERFMON_EVENTSEL_OS (1 << 17)
#define ARCH_PERFMON_EVENTSEL_USR (1 << 16)
#define TIF_NOTSC 16 /* TSC is not accessible in userland */
#define TIF_IA32 17 /* 32bit process */
#define TIF_FORK 18 /* ret_from_fork */
-#define TIF_ABI_PENDING 19
#define TIF_MEMDIE 20
#define TIF_DEBUG 21 /* uses debug registers */
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
#define _TIF_NOTSC (1 << TIF_NOTSC)
#define _TIF_IA32 (1 << TIF_IA32)
#define _TIF_FORK (1 << TIF_FORK)
-#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING)
#define _TIF_DEBUG (1 << TIF_DEBUG)
#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
#define _TIF_FREEZE (1 << TIF_FREEZE)
* if acpi_blacklisted() acpi_disabled = 1;
* acpi_irq_model=...
* ...
- *
- * return value: (currently ignored)
- * 0: success
- * !0: failure
*/
-int __init acpi_boot_table_init(void)
+void __init acpi_boot_table_init(void)
{
- int error;
-
dmi_check_system(acpi_dmi_table);
/*
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return;
/*
* Initialize the ACPI boot-time table parser.
*/
- error = acpi_table_init();
- if (error) {
+ if (acpi_table_init()) {
disable_acpi();
- return error;
+ return;
}
acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
*/
- error = acpi_blacklisted();
- if (error) {
+ if (acpi_blacklisted()) {
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
disable_acpi();
- return error;
+ return;
}
}
-
- return 0;
}
int __init early_acpi_boot_init(void)
{
int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
struct amd_iommu *iommu;
- int i;
+ unsigned long i;
#ifdef CONFIG_IOMMU_STRESS
populate = false;
{
struct iommu_dev_data *dev_data = get_dev_data(dev);
struct iommu_dev_data *alias_data;
+ struct protection_domain *domain;
unsigned long flags;
BUG_ON(!dev_data->domain);
- spin_lock_irqsave(&dev_data->domain->lock, flags);
+ domain = dev_data->domain;
+
+ spin_lock_irqsave(&domain->lock, flags);
if (dev_data->alias != dev) {
alias_data = get_dev_data(dev_data->alias);
if (atomic_dec_and_test(&dev_data->bind))
do_detach(dev);
- spin_unlock_irqrestore(&dev_data->domain->lock, flags);
+ spin_unlock_irqrestore(&domain->lock, flags);
/*
* If we run in passthrough mode the device must be assigned to the
- * passthrough domain if it is detached from any other domain
+ * passthrough domain if it is detached from any other domain.
+ * Make sure we can deassign from the pt_domain itself.
*/
- if (iommu_pass_through && dev_data->domain == NULL)
+ if (iommu_pass_through &&
+ (dev_data->domain == NULL && domain != pt_domain))
__attach_device(dev, pt_domain);
}
/*
* The function which clues the AMD IOMMU driver into dma_ops.
*/
+
+void __init amd_iommu_init_api(void)
+{
+ register_iommu(&amd_iommu_ops);
+}
+
int __init amd_iommu_init_dma_ops(void)
{
struct amd_iommu *iommu;
/* Make the driver finally visible to the drivers */
dma_ops = &amd_iommu_dma_ops;
- register_iommu(&amd_iommu_ops);
-
amd_iommu_stats_init();
return 0;
ret = amd_iommu_init_passthrough();
else
ret = amd_iommu_init_dma_ops();
+
if (ret)
goto free;
+ amd_iommu_init_api();
+
amd_iommu_init_notifier();
enable_iommus();
obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o
obj-$(CONFIG_X86_64) += bugs_64.o
-obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o
-
obj-$(CONFIG_CPU_SUP_INTEL) += intel.o
obj-$(CONFIG_CPU_SUP_AMD) += amd.o
obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
+++ /dev/null
-/*
- * CPU x86 architecture debug code
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- *
- * For licencing details see kernel-base/COPYING
- */
-
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/percpu.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-
-#include <asm/cpu_debug.h>
-#include <asm/paravirt.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/apic.h>
-#include <asm/desc.h>
-
-static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr);
-static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr);
-static DEFINE_PER_CPU(int, cpud_priv_count);
-
-static DEFINE_MUTEX(cpu_debug_lock);
-
-static struct dentry *cpu_debugfs_dir;
-
-static struct cpu_debug_base cpu_base[] = {
- { "mc", CPU_MC, 0 },
- { "monitor", CPU_MONITOR, 0 },
- { "time", CPU_TIME, 0 },
- { "pmc", CPU_PMC, 1 },
- { "platform", CPU_PLATFORM, 0 },
- { "apic", CPU_APIC, 0 },
- { "poweron", CPU_POWERON, 0 },
- { "control", CPU_CONTROL, 0 },
- { "features", CPU_FEATURES, 0 },
- { "lastbranch", CPU_LBRANCH, 0 },
- { "bios", CPU_BIOS, 0 },
- { "freq", CPU_FREQ, 0 },
- { "mtrr", CPU_MTRR, 0 },
- { "perf", CPU_PERF, 0 },
- { "cache", CPU_CACHE, 0 },
- { "sysenter", CPU_SYSENTER, 0 },
- { "therm", CPU_THERM, 0 },
- { "misc", CPU_MISC, 0 },
- { "debug", CPU_DEBUG, 0 },
- { "pat", CPU_PAT, 0 },
- { "vmx", CPU_VMX, 0 },
- { "call", CPU_CALL, 0 },
- { "base", CPU_BASE, 0 },
- { "ver", CPU_VER, 0 },
- { "conf", CPU_CONF, 0 },
- { "smm", CPU_SMM, 0 },
- { "svm", CPU_SVM, 0 },
- { "osvm", CPU_OSVM, 0 },
- { "tss", CPU_TSS, 0 },
- { "cr", CPU_CR, 0 },
- { "dt", CPU_DT, 0 },
- { "registers", CPU_REG_ALL, 0 },
-};
-
-static struct cpu_file_base cpu_file[] = {
- { "index", CPU_REG_ALL, 0 },
- { "value", CPU_REG_ALL, 1 },
-};
-
-/* CPU Registers Range */
-static struct cpu_debug_range cpu_reg_range[] = {
- { 0x00000000, 0x00000001, CPU_MC, },
- { 0x00000006, 0x00000007, CPU_MONITOR, },
- { 0x00000010, 0x00000010, CPU_TIME, },
- { 0x00000011, 0x00000013, CPU_PMC, },
- { 0x00000017, 0x00000017, CPU_PLATFORM, },
- { 0x0000001B, 0x0000001B, CPU_APIC, },
- { 0x0000002A, 0x0000002B, CPU_POWERON, },
- { 0x0000002C, 0x0000002C, CPU_FREQ, },
- { 0x0000003A, 0x0000003A, CPU_CONTROL, },
- { 0x00000040, 0x00000047, CPU_LBRANCH, },
- { 0x00000060, 0x00000067, CPU_LBRANCH, },
- { 0x00000079, 0x00000079, CPU_BIOS, },
- { 0x00000088, 0x0000008A, CPU_CACHE, },
- { 0x0000008B, 0x0000008B, CPU_BIOS, },
- { 0x0000009B, 0x0000009B, CPU_MONITOR, },
- { 0x000000C1, 0x000000C4, CPU_PMC, },
- { 0x000000CD, 0x000000CD, CPU_FREQ, },
- { 0x000000E7, 0x000000E8, CPU_PERF, },
- { 0x000000FE, 0x000000FE, CPU_MTRR, },
-
- { 0x00000116, 0x0000011E, CPU_CACHE, },
- { 0x00000174, 0x00000176, CPU_SYSENTER, },
- { 0x00000179, 0x0000017B, CPU_MC, },
- { 0x00000186, 0x00000189, CPU_PMC, },
- { 0x00000198, 0x00000199, CPU_PERF, },
- { 0x0000019A, 0x0000019A, CPU_TIME, },
- { 0x0000019B, 0x0000019D, CPU_THERM, },
- { 0x000001A0, 0x000001A0, CPU_MISC, },
- { 0x000001C9, 0x000001C9, CPU_LBRANCH, },
- { 0x000001D7, 0x000001D8, CPU_LBRANCH, },
- { 0x000001D9, 0x000001D9, CPU_DEBUG, },
- { 0x000001DA, 0x000001E0, CPU_LBRANCH, },
-
- { 0x00000200, 0x0000020F, CPU_MTRR, },
- { 0x00000250, 0x00000250, CPU_MTRR, },
- { 0x00000258, 0x00000259, CPU_MTRR, },
- { 0x00000268, 0x0000026F, CPU_MTRR, },
- { 0x00000277, 0x00000277, CPU_PAT, },
- { 0x000002FF, 0x000002FF, CPU_MTRR, },
-
- { 0x00000300, 0x00000311, CPU_PMC, },
- { 0x00000345, 0x00000345, CPU_PMC, },
- { 0x00000360, 0x00000371, CPU_PMC, },
- { 0x0000038D, 0x00000390, CPU_PMC, },
- { 0x000003A0, 0x000003BE, CPU_PMC, },
- { 0x000003C0, 0x000003CD, CPU_PMC, },
- { 0x000003E0, 0x000003E1, CPU_PMC, },
- { 0x000003F0, 0x000003F2, CPU_PMC, },
-
- { 0x00000400, 0x00000417, CPU_MC, },
- { 0x00000480, 0x0000048B, CPU_VMX, },
-
- { 0x00000600, 0x00000600, CPU_DEBUG, },
- { 0x00000680, 0x0000068F, CPU_LBRANCH, },
- { 0x000006C0, 0x000006CF, CPU_LBRANCH, },
-
- { 0x000107CC, 0x000107D3, CPU_PMC, },
-
- { 0xC0000080, 0xC0000080, CPU_FEATURES, },
- { 0xC0000081, 0xC0000084, CPU_CALL, },
- { 0xC0000100, 0xC0000102, CPU_BASE, },
- { 0xC0000103, 0xC0000103, CPU_TIME, },
-
- { 0xC0010000, 0xC0010007, CPU_PMC, },
- { 0xC0010010, 0xC0010010, CPU_CONF, },
- { 0xC0010015, 0xC0010015, CPU_CONF, },
- { 0xC0010016, 0xC001001A, CPU_MTRR, },
- { 0xC001001D, 0xC001001D, CPU_MTRR, },
- { 0xC001001F, 0xC001001F, CPU_CONF, },
- { 0xC0010030, 0xC0010035, CPU_BIOS, },
- { 0xC0010044, 0xC0010048, CPU_MC, },
- { 0xC0010050, 0xC0010056, CPU_SMM, },
- { 0xC0010058, 0xC0010058, CPU_CONF, },
- { 0xC0010060, 0xC0010060, CPU_CACHE, },
- { 0xC0010061, 0xC0010068, CPU_SMM, },
- { 0xC0010069, 0xC001006B, CPU_SMM, },
- { 0xC0010070, 0xC0010071, CPU_SMM, },
- { 0xC0010111, 0xC0010113, CPU_SMM, },
- { 0xC0010114, 0xC0010118, CPU_SVM, },
- { 0xC0010140, 0xC0010141, CPU_OSVM, },
- { 0xC0011022, 0xC0011023, CPU_CONF, },
-};
-
-static int is_typeflag_valid(unsigned cpu, unsigned flag)
-{
- int i;
-
- /* Standard Registers should be always valid */
- if (flag >= CPU_TSS)
- return 1;
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (cpu_reg_range[i].flag == flag)
- return 1;
- }
-
- /* Invalid */
- return 0;
-}
-
-static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
- int index, unsigned flag)
-{
- if (cpu_reg_range[index].flag == flag) {
- *min = cpu_reg_range[index].min;
- *max = cpu_reg_range[index].max;
- } else
- *max = 0;
-
- return *max;
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_cpu_data(struct seq_file *seq, unsigned type,
- u32 low, u32 high)
-{
- struct cpu_private *priv;
- u64 val = high;
-
- if (seq) {
- priv = seq->private;
- if (priv->file) {
- val = (val << 32) | low;
- seq_printf(seq, "0x%llx\n", val);
- } else
- seq_printf(seq, " %08x: %08x_%08x\n",
- type, high, low);
- } else
- printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low);
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
-{
- unsigned msr, msr_min, msr_max;
- struct cpu_private *priv;
- u32 low, high;
- int i;
-
- if (seq) {
- priv = seq->private;
- if (priv->file) {
- if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg,
- &low, &high))
- print_cpu_data(seq, priv->reg, low, high);
- return;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
- continue;
-
- for (msr = msr_min; msr <= msr_max; msr++) {
- if (rdmsr_safe_on_cpu(cpu, msr, &low, &high))
- continue;
- print_cpu_data(seq, msr, low, high);
- }
- }
-}
-
-static void print_tss(void *arg)
-{
- struct pt_regs *regs = task_pt_regs(current);
- struct seq_file *seq = arg;
- unsigned int seg;
-
- seq_printf(seq, " RAX\t: %016lx\n", regs->ax);
- seq_printf(seq, " RBX\t: %016lx\n", regs->bx);
- seq_printf(seq, " RCX\t: %016lx\n", regs->cx);
- seq_printf(seq, " RDX\t: %016lx\n", regs->dx);
-
- seq_printf(seq, " RSI\t: %016lx\n", regs->si);
- seq_printf(seq, " RDI\t: %016lx\n", regs->di);
- seq_printf(seq, " RBP\t: %016lx\n", regs->bp);
- seq_printf(seq, " ESP\t: %016lx\n", regs->sp);
-
-#ifdef CONFIG_X86_64
- seq_printf(seq, " R08\t: %016lx\n", regs->r8);
- seq_printf(seq, " R09\t: %016lx\n", regs->r9);
- seq_printf(seq, " R10\t: %016lx\n", regs->r10);
- seq_printf(seq, " R11\t: %016lx\n", regs->r11);
- seq_printf(seq, " R12\t: %016lx\n", regs->r12);
- seq_printf(seq, " R13\t: %016lx\n", regs->r13);
- seq_printf(seq, " R14\t: %016lx\n", regs->r14);
- seq_printf(seq, " R15\t: %016lx\n", regs->r15);
-#endif
-
- asm("movl %%cs,%0" : "=r" (seg));
- seq_printf(seq, " CS\t: %04x\n", seg);
- asm("movl %%ds,%0" : "=r" (seg));
- seq_printf(seq, " DS\t: %04x\n", seg);
- seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff);
- asm("movl %%es,%0" : "=r" (seg));
- seq_printf(seq, " ES\t: %04x\n", seg);
- asm("movl %%fs,%0" : "=r" (seg));
- seq_printf(seq, " FS\t: %04x\n", seg);
- asm("movl %%gs,%0" : "=r" (seg));
- seq_printf(seq, " GS\t: %04x\n", seg);
-
- seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags);
-
- seq_printf(seq, " EIP\t: %016lx\n", regs->ip);
-}
-
-static void print_cr(void *arg)
-{
- struct seq_file *seq = arg;
-
- seq_printf(seq, " cr0\t: %016lx\n", read_cr0());
- seq_printf(seq, " cr2\t: %016lx\n", read_cr2());
- seq_printf(seq, " cr3\t: %016lx\n", read_cr3());
- seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe());
-#ifdef CONFIG_X86_64
- seq_printf(seq, " cr8\t: %016lx\n", read_cr8());
-#endif
-}
-
-static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt)
-{
- seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size));
-}
-
-static void print_dt(void *seq)
-{
- struct desc_ptr dt;
- unsigned long ldt;
-
- /* IDT */
- store_idt((struct desc_ptr *)&dt);
- print_desc_ptr("IDT", seq, dt);
-
- /* GDT */
- store_gdt((struct desc_ptr *)&dt);
- print_desc_ptr("GDT", seq, dt);
-
- /* LDT */
- store_ldt(ldt);
- seq_printf(seq, " LDT\t: %016lx\n", ldt);
-
- /* TR */
- store_tr(ldt);
- seq_printf(seq, " TR\t: %016lx\n", ldt);
-}
-
-static void print_dr(void *arg)
-{
- struct seq_file *seq = arg;
- unsigned long dr;
- int i;
-
- for (i = 0; i < 8; i++) {
- /* Ignore db4, db5 */
- if ((i == 4) || (i == 5))
- continue;
- get_debugreg(dr, i);
- seq_printf(seq, " dr%d\t: %016lx\n", i, dr);
- }
-
- seq_printf(seq, "\n MSR\t:\n");
-}
-
-static void print_apic(void *arg)
-{
- struct seq_file *seq = arg;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- seq_printf(seq, " LAPIC\t:\n");
- seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24);
- seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR));
- seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI));
- seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI));
- seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI));
- seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR));
- seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR));
- seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV));
- seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR));
- seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR));
- seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR));
- seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2));
- seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT));
- seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR));
- seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC));
- seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0));
- seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1));
- seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR));
- seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT));
- seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT));
- seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR));
- if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
- unsigned int i, v, maxeilvt;
-
- v = apic_read(APIC_EFEAT);
- maxeilvt = (v >> 16) & 0xff;
- seq_printf(seq, " EFEAT\t\t: %08x\n", v);
- seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
-
- for (i = 0; i < maxeilvt; i++) {
- v = apic_read(APIC_EILVTn(i));
- seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
- }
- }
-#endif /* CONFIG_X86_LOCAL_APIC */
- seq_printf(seq, "\n MSR\t:\n");
-}
-
-static int cpu_seq_show(struct seq_file *seq, void *v)
-{
- struct cpu_private *priv = seq->private;
-
- if (priv == NULL)
- return -EINVAL;
-
- switch (cpu_base[priv->type].flag) {
- case CPU_TSS:
- smp_call_function_single(priv->cpu, print_tss, seq, 1);
- break;
- case CPU_CR:
- smp_call_function_single(priv->cpu, print_cr, seq, 1);
- break;
- case CPU_DT:
- smp_call_function_single(priv->cpu, print_dt, seq, 1);
- break;
- case CPU_DEBUG:
- if (priv->file == CPU_INDEX_BIT)
- smp_call_function_single(priv->cpu, print_dr, seq, 1);
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
- case CPU_APIC:
- if (priv->file == CPU_INDEX_BIT)
- smp_call_function_single(priv->cpu, print_apic, seq, 1);
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
-
- default:
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
- }
- seq_printf(seq, "\n");
-
- return 0;
-}
-
-static void *cpu_seq_start(struct seq_file *seq, loff_t *pos)
-{
- if (*pos == 0) /* One time is enough ;-) */
- return seq;
-
- return NULL;
-}
-
-static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- (*pos)++;
-
- return cpu_seq_start(seq, pos);
-}
-
-static void cpu_seq_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations cpu_seq_ops = {
- .start = cpu_seq_start,
- .next = cpu_seq_next,
- .stop = cpu_seq_stop,
- .show = cpu_seq_show,
-};
-
-static int cpu_seq_open(struct inode *inode, struct file *file)
-{
- struct cpu_private *priv = inode->i_private;
- struct seq_file *seq;
- int err;
-
- err = seq_open(file, &cpu_seq_ops);
- if (!err) {
- seq = file->private_data;
- seq->private = priv;
- }
-
- return err;
-}
-
-static int write_msr(struct cpu_private *priv, u64 val)
-{
- u32 low, high;
-
- high = (val >> 32) & 0xffffffff;
- low = val & 0xffffffff;
-
- if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high))
- return 0;
-
- return -EPERM;
-}
-
-static int write_cpu_register(struct cpu_private *priv, const char *buf)
-{
- int ret = -EPERM;
- u64 val;
-
- ret = strict_strtoull(buf, 0, &val);
- if (ret < 0)
- return ret;
-
- /* Supporting only MSRs */
- if (priv->type < CPU_TSS_BIT)
- return write_msr(priv, val);
-
- return ret;
-}
-
-static ssize_t cpu_write(struct file *file, const char __user *ubuf,
- size_t count, loff_t *off)
-{
- struct seq_file *seq = file->private_data;
- struct cpu_private *priv = seq->private;
- char buf[19];
-
- if ((priv == NULL) || (count >= sizeof(buf)))
- return -EINVAL;
-
- if (copy_from_user(&buf, ubuf, count))
- return -EFAULT;
-
- buf[count] = 0;
-
- if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write))
- if (!write_cpu_register(priv, buf))
- return count;
-
- return -EACCES;
-}
-
-static const struct file_operations cpu_fops = {
- .owner = THIS_MODULE,
- .open = cpu_seq_open,
- .read = seq_read,
- .write = cpu_write,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg,
- unsigned file, struct dentry *dentry)
-{
- struct cpu_private *priv = NULL;
-
- /* Already intialized */
- if (file == CPU_INDEX_BIT)
- if (per_cpu(cpud_arr[type].init, cpu))
- return 0;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL)
- return -ENOMEM;
-
- priv->cpu = cpu;
- priv->type = type;
- priv->reg = reg;
- priv->file = file;
- mutex_lock(&cpu_debug_lock);
- per_cpu(cpud_priv_arr[type], cpu) = priv;
- per_cpu(cpud_priv_count, cpu)++;
- mutex_unlock(&cpu_debug_lock);
-
- if (file)
- debugfs_create_file(cpu_file[file].name, S_IRUGO,
- dentry, (void *)priv, &cpu_fops);
- else {
- debugfs_create_file(cpu_base[type].name, S_IRUGO,
- per_cpu(cpud_arr[type].dentry, cpu),
- (void *)priv, &cpu_fops);
- mutex_lock(&cpu_debug_lock);
- per_cpu(cpud_arr[type].init, cpu) = 1;
- mutex_unlock(&cpu_debug_lock);
- }
-
- return 0;
-}
-
-static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg,
- struct dentry *dentry)
-{
- unsigned file;
- int err = 0;
-
- for (file = 0; file < ARRAY_SIZE(cpu_file); file++) {
- err = cpu_create_file(cpu, type, reg, file, dentry);
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry)
-{
- struct dentry *cpu_dentry = NULL;
- unsigned reg, reg_min, reg_max;
- int i, err = 0;
- char reg_dir[12];
- u32 low, high;
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (!get_cpu_range(cpu, ®_min, ®_max, i,
- cpu_base[type].flag))
- continue;
-
- for (reg = reg_min; reg <= reg_max; reg++) {
- if (rdmsr_safe_on_cpu(cpu, reg, &low, &high))
- continue;
-
- sprintf(reg_dir, "0x%x", reg);
- cpu_dentry = debugfs_create_dir(reg_dir, dentry);
- err = cpu_init_regfiles(cpu, type, reg, cpu_dentry);
- if (err)
- return err;
- }
- }
-
- return err;
-}
-
-static int cpu_init_allreg(unsigned cpu, struct dentry *dentry)
-{
- struct dentry *cpu_dentry = NULL;
- unsigned type;
- int err = 0;
-
- for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) {
- if (!is_typeflag_valid(cpu, cpu_base[type].flag))
- continue;
- cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry);
- per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry;
-
- if (type < CPU_TSS_BIT)
- err = cpu_init_msr(cpu, type, cpu_dentry);
- else
- err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT,
- cpu_dentry);
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int cpu_init_cpu(void)
-{
- struct dentry *cpu_dentry = NULL;
- struct cpuinfo_x86 *cpui;
- char cpu_dir[12];
- unsigned cpu;
- int err = 0;
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
- cpui = &cpu_data(cpu);
- if (!cpu_has(cpui, X86_FEATURE_MSR))
- continue;
-
- sprintf(cpu_dir, "cpu%d", cpu);
- cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
- err = cpu_init_allreg(cpu, cpu_dentry);
-
- pr_info("cpu%d(%d) debug files %d\n",
- cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu));
- if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) {
- pr_err("Register files count %d exceeds limit %d\n",
- per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES);
- per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES;
- err = -ENFILE;
- }
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int __init cpu_debug_init(void)
-{
- cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir);
-
- return cpu_init_cpu();
-}
-
-static void __exit cpu_debug_exit(void)
-{
- int i, cpu;
-
- if (cpu_debugfs_dir)
- debugfs_remove_recursive(cpu_debugfs_dir);
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++)
- for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++)
- kfree(per_cpu(cpud_priv_arr[i], cpu));
-}
-
-module_init(cpu_debug_init);
-module_exit(cpu_debug_exit);
-
-MODULE_AUTHOR("Jaswinder Singh Rajput");
-MODULE_DESCRIPTION("CPU Debug module");
-MODULE_LICENSE("GPL");
bits |= 0x2;
if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
bits |= 0x1;
+
+ /*
+ * ANY bit is supported in v3 and up
+ */
+ if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY)
+ bits |= 0x4;
+
bits <<= (idx * 4);
mask = 0xfULL << (idx * 4);
for_each_online_cpu(cpu)
cpuid_device_destroy(cpu);
class_destroy(cpuid_class);
- unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+ __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
unregister_hotcpu_notifier(&cpuid_class_cpu_notifier);
}
*/
unsigned long hpet_address;
u8 hpet_blockid; /* OS timer block num */
+u8 hpet_msi_disable;
+
#ifdef CONFIG_PCI_MSI
static unsigned long hpet_num_timers;
#endif
unsigned int num_timers_used = 0;
int i;
+ if (hpet_msi_disable)
+ return;
+
if (boot_cpu_has(X86_FEATURE_ARAT))
return;
id = hpet_readl(HPET_ID);
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
hpet_print_config();
+ if (hpet_msi_disable)
+ return 0;
+
if (boot_cpu_has(X86_FEATURE_ARAT))
return 0;
#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
#define UCODE_UCODE_TYPE 0x00000001
-const struct firmware *firmware;
-static int supported_cpu;
-
struct equiv_cpu_entry {
u32 installed_cpu;
u32 fixed_errata_mask;
static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
u32 dummy;
- if (!supported_cpu)
- return -1;
-
memset(csig, 0, sizeof(*csig));
+ if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+ pr_warning("microcode: CPU%d: AMD CPU family 0x%x not "
+ "supported\n", cpu, c->x86);
+ return -1;
+ }
rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
return 0;
static enum ucode_state request_microcode_fw(int cpu, struct device *device)
{
+ const char *fw_name = "amd-ucode/microcode_amd.bin";
+ const struct firmware *firmware;
enum ucode_state ret;
- if (firmware == NULL)
+ if (request_firmware(&firmware, fw_name, device)) {
+ printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
return UCODE_NFOUND;
+ }
if (*(u32 *)firmware->data != UCODE_MAGIC) {
pr_err("invalid UCODE_MAGIC (0x%08x)\n",
ret = generic_load_microcode(cpu, firmware->data, firmware->size);
+ release_firmware(firmware);
+
return ret;
}
uci->mc = NULL;
}
-void init_microcode_amd(struct device *device)
-{
- const char *fw_name = "amd-ucode/microcode_amd.bin";
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
- WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
-
- if (c->x86 < 0x10) {
- pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
- return;
- }
- supported_cpu = 1;
-
- if (request_firmware(&firmware, fw_name, device))
- pr_err("failed to load file %s\n", fw_name);
-}
-
-void fini_microcode_amd(void)
-{
- release_firmware(firmware);
-}
-
static struct microcode_ops microcode_amd_ops = {
- .init = init_microcode_amd,
- .fini = fini_microcode_amd,
.request_microcode_user = request_microcode_user,
.request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info_amd,
return PTR_ERR(microcode_pdev);
}
- if (microcode_ops->init)
- microcode_ops->init(µcode_pdev->dev);
-
get_online_cpus();
mutex_lock(µcode_mutex);
platform_device_unregister(microcode_pdev);
- if (microcode_ops->fini)
- microcode_ops->fini();
-
microcode_ops = NULL;
pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
for_each_online_cpu(cpu)
msr_device_destroy(cpu);
class_destroy(msr_class);
- unregister_chrdev(MSR_MAJOR, "cpu/msr");
+ __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
unregister_hotcpu_notifier(&msr_class_cpu_notifier);
}
{
struct task_struct *tsk = current;
-#ifdef CONFIG_X86_64
- if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
- clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
- if (test_tsk_thread_flag(tsk, TIF_IA32)) {
- clear_tsk_thread_flag(tsk, TIF_IA32);
- } else {
- set_tsk_thread_flag(tsk, TIF_IA32);
- current_thread_info()->status |= TS_COMPAT;
- }
- }
-#endif
-
flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
/*
current->personality &= ~READ_IMPLIES_EXEC;
}
+void set_personality_ia32(void)
+{
+ /* inherit personality from parent */
+
+ /* Make sure to be in 32bit mode */
+ set_thread_flag(TIF_IA32);
+
+ /* Prepare the first "return" to user space */
+ current_thread_info()->status |= TS_COMPAT;
+}
+
unsigned long get_wchan(struct task_struct *p)
{
unsigned long stack;
break;
}
}
+
+/*
+ * HPET MSI on some boards (ATI SB700/SB800) has side effect on
+ * floppy DMA. Disable HPET MSI on such platforms.
+ */
+static void force_disable_hpet_msi(struct pci_dev *unused)
+{
+ hpet_msi_disable = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ force_disable_hpet_msi);
+
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
},
},
+ { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 760",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
+ DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
+ },
+ },
{ /* Handle problems with rebooting on Dell 2400's */
.callback = set_bios_reboot,
.ident = "Dell PowerEdge 2400",
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
},
},
- {
/*
- * AMI BIOS with low memory corruption was found on Intel DG45ID board.
- * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * AMI BIOS with low memory corruption was found on Intel DG45ID and
+ * DG45FC boards.
+ * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
* match only DMI_BOARD_NAME and see if there is more bad products
* with this vendor.
*/
+ {
.callback = dmi_low_memory_corruption,
.ident = "AMI BIOS",
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
},
},
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
+ },
+ },
#endif
{}
};
/*
* Read the RTC.
+ *
+ * Starting with HUB rev 2.0, the UV RTC register is replicated across all
+ * cachelines of it's own page. This allows faster simultaneous reads
+ * from a given socket.
*/
static cycle_t uv_read_rtc(struct clocksource *cs)
{
- return (cycle_t)uv_read_local_mmr(UVH_RTC);
+ unsigned long offset;
+
+ if (uv_get_min_hub_revision_id() == 1)
+ offset = 0;
+ else
+ offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE;
+
+ return (cycle_t)uv_read_local_mmr(UVH_RTC | offset);
}
/*
if (unlikely(!apic_enabled(apic)))
break;
+ if (trig_mode) {
+ apic_debug("level trig mode for vector %d", vector);
+ apic_set_vector(vector, apic->regs + APIC_TMR);
+ } else
+ apic_clear_vector(vector, apic->regs + APIC_TMR);
+
result = !apic_test_and_set_irr(vector, apic);
trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
trig_mode, vector, !result);
break;
}
- if (trig_mode) {
- apic_debug("level trig mode for vector %d", vector);
- apic_set_vector(vector, apic->regs + APIC_TMR);
- } else
- apic_clear_vector(vector, apic->regs + APIC_TMR);
kvm_vcpu_kick(vcpu);
break;
addr = gfn_to_hva(kvm, gfn);
if (kvm_is_error_hva(addr))
- return page_size;
+ return PT_PAGE_TABLE_LEVEL;
down_read(¤t->mm->mmap_sem);
vma = find_vma(current->mm, addr);
if (host_level == PT_PAGE_TABLE_LEVEL)
return host_level;
- for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
-
+ for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level)
if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
break;
- }
return level - 1;
}
walker->table_gfn[walker->level - 1] = table_gfn;
walker->pte_gpa[walker->level - 1] = pte_gpa;
- kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+ if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte)))
+ goto not_present;
+
trace_kvm_mmu_paging_element(pte, walker->level);
if (!is_present_gpte(pte))
GFP_KERNEL);
if (!vcpu->arch.mce_banks) {
r = -ENOMEM;
- goto fail_mmu_destroy;
+ goto fail_free_lapic;
}
vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
return 0;
-
+fail_free_lapic:
+ kvm_free_lapic(vcpu);
fail_mmu_destroy:
kvm_mmu_destroy(vcpu);
fail_free_pio_data:
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
{
+ kfree(vcpu->arch.mce_banks);
kvm_free_lapic(vcpu);
down_read(&vcpu->kvm->slots_lock);
kvm_mmu_destroy(vcpu);
kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
{
struct die_args *arg = args;
+ unsigned long* dr6_p = (unsigned long *)ERR_PTR(arg->err);
- if (val == DIE_DEBUG && (arg->err & DR_STEP))
- if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+ if (val == DIE_DEBUG && (*dr6_p & DR_STEP))
+ if (post_kmmio_handler(*dr6_p, arg->regs) == 1) {
/*
* Reset the BS bit in dr6 (pointed by args->err) to
* denote completion of processing
*/
- (*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
+ *dr6_p &= ~DR_STEP;
return NOTIFY_STOP;
}
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
}
- if (changed)
+ if (changed) {
+ node_set(node, cpu_nodes_parsed);
printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
nd->start, nd->end);
+ }
}
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
/* move to next set */
si += model->num_counters;
- if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+ if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
per_cpu(switch_index, cpu) = 0;
else
per_cpu(switch_index, cpu) = si;
case 15: case 23:
*cpu_type = "i386/core_2";
break;
+ case 0x2e:
case 26:
spec = &op_arch_perfmon_spec;
*cpu_type = "i386/core_i7";
obj-y += common.o early.o
obj-y += amd_bus.o
-obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o
+obj-$(CONFIG_X86_64) += bus_numa.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
+++ /dev/null
-/*
- * to read io range from IOH pci conf, need to do it after mmconfig is there
- */
-
-#include <linux/delay.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/pci_x86.h>
-
-#include "bus_numa.h"
-
-static inline void print_ioh_resources(struct pci_root_info *info)
-{
- int res_num;
- int busnum;
- int i;
-
- printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
- info->bus_min, info->bus_max);
- res_num = info->res_num;
- busnum = info->bus_min;
- for (i = 0; i < res_num; i++) {
- struct resource *res;
-
- res = &info->res[i];
- printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
- busnum, i,
- (res->flags & IORESOURCE_IO) ? "io port" :
- "mmio",
- res->start, res->end);
- }
-}
-
-#define IOH_LIO 0x108
-#define IOH_LMMIOL 0x10c
-#define IOH_LMMIOH 0x110
-#define IOH_LMMIOH_BASEU 0x114
-#define IOH_LMMIOH_LIMITU 0x118
-#define IOH_LCFGBUS 0x11c
-
-static void __devinit pci_root_bus_res(struct pci_dev *dev)
-{
- u16 word;
- u32 dword;
- struct pci_root_info *info;
- u16 io_base, io_end;
- u32 mmiol_base, mmiol_end;
- u64 mmioh_base, mmioh_end;
- int bus_base, bus_end;
-
- /* some sys doesn't get mmconf enabled */
- if (dev->cfg_size < 0x120)
- return;
-
- if (pci_root_num >= PCI_ROOT_NR) {
- printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
- return;
- }
-
- info = &pci_root_info[pci_root_num];
- pci_root_num++;
-
- pci_read_config_word(dev, IOH_LCFGBUS, &word);
- bus_base = (word & 0xff);
- bus_end = (word & 0xff00) >> 8;
- sprintf(info->name, "PCI Bus #%02x", bus_base);
- info->bus_min = bus_base;
- info->bus_max = bus_end;
-
- pci_read_config_word(dev, IOH_LIO, &word);
- io_base = (word & 0xf0) << (12 - 4);
- io_end = (word & 0xf000) | 0xfff;
- update_res(info, io_base, io_end, IORESOURCE_IO, 0);
-
- pci_read_config_dword(dev, IOH_LMMIOL, &dword);
- mmiol_base = (dword & 0xff00) << (24 - 8);
- mmiol_end = (dword & 0xff000000) | 0xffffff;
- update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
-
- pci_read_config_dword(dev, IOH_LMMIOH, &dword);
- mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
- mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
- pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
- mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
- pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
- mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
- update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
-
- print_ioh_resources(info);
-}
-
-/* intel IOH */
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
if (atomic_long_dec_and_test(&ioc->refcount)) {
rcu_read_lock();
- if (ioc->aic && ioc->aic->dtor)
- ioc->aic->dtor(ioc->aic);
cfq_dtor(ioc);
rcu_read_unlock();
task_unlock(task);
if (atomic_dec_and_test(&ioc->nr_tasks)) {
- if (ioc->aic && ioc->aic->exit)
- ioc->aic->exit(ioc->aic);
cfq_exit(ioc);
}
ret->ioprio = 0;
ret->last_waited = jiffies; /* doesn't matter... */
ret->nr_batch_requests = 0; /* because this is 0 */
- ret->aic = NULL;
INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
INIT_HLIST_HEAD(&ret->cic_list);
ret->ioc_data = NULL;
sector_t offset)
{
sector_t alignment;
- unsigned int top, bottom;
+ unsigned int top, bottom, ret = 0;
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
+ t->misaligned |= b->misaligned;
+
alignment = queue_limit_alignment_offset(b, offset);
/* Bottom device has different alignment. Check that it is
bottom = max(b->physical_block_size, b->io_min) + alignment;
/* Verify that top and bottom intervals line up */
- if (max(top, bottom) & (min(top, bottom) - 1))
+ if (max(top, bottom) & (min(top, bottom) - 1)) {
t->misaligned = 1;
+ ret = -1;
+ }
}
t->logical_block_size = max(t->logical_block_size,
if (t->physical_block_size & (t->logical_block_size - 1)) {
t->physical_block_size = t->logical_block_size;
t->misaligned = 1;
+ ret = -1;
}
/* Minimum I/O a multiple of the physical block size? */
if (t->io_min & (t->physical_block_size - 1)) {
t->io_min = t->physical_block_size;
t->misaligned = 1;
+ ret = -1;
}
/* Optimal I/O a multiple of the physical block size? */
if (t->io_opt & (t->physical_block_size - 1)) {
t->io_opt = 0;
t->misaligned = 1;
+ ret = -1;
}
/* Find lowest common alignment_offset */
& (max(t->physical_block_size, t->io_min) - 1);
/* Verify that new alignment_offset is on a logical block boundary */
- if (t->alignment_offset & (t->logical_block_size - 1))
+ if (t->alignment_offset & (t->logical_block_size - 1)) {
t->misaligned = 1;
+ ret = -1;
+ }
/* Discard alignment and granularity */
if (b->discard_granularity) {
(t->discard_granularity - 1);
}
- return t->misaligned ? -1 : 0;
+ return ret;
}
EXPORT_SYMBOL(blk_stack_limits);
+/**
+ * bdev_stack_limits - adjust queue limits for stacked drivers
+ * @t: the stacking driver limits (top device)
+ * @bdev: the component block_device (bottom)
+ * @start: first data sector within component device
+ *
+ * Description:
+ * Merges queue limits for a top device and a block_device. Returns
+ * 0 if alignment didn't change. Returns -1 if adding the bottom
+ * device caused misalignment.
+ */
+int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+ sector_t start)
+{
+ struct request_queue *bq = bdev_get_queue(bdev);
+
+ start += get_start_sect(bdev);
+
+ return blk_stack_limits(t, &bq->limits, start << 9);
+}
+EXPORT_SYMBOL(bdev_stack_limits);
+
/**
* disk_stack_limits - adjust queue limits for stacked drivers
* @disk: MD/DM gendisk (top)
if (cfq_class_idle(cfqq))
return true;
+ /*
+ * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice.
+ */
+ if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq))
+ return false;
+
/*
* if the new request is sync, but the currently running queue is
* not, let the sync request have priority.
{
struct gendisk *disk = dev_to_disk(dev);
- return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue));
+ return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
}
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
* the mechanism only works when all CPUs have RT task running,
* as if one CPU hasn't RT task, RT task from other CPUs will
* borrow CPU time from this CPU and cause RT task use > 95%
- * CPU time. To make 'avoid staration' work, takes a nap here.
+ * CPU time. To make 'avoid starvation' work, takes a nap here.
*/
if (do_sleep)
schedule_timeout_killable(HZ * idle_pct / 100);
static unsigned int ps_tsk_num;
static int create_power_saving_task(void)
{
+ int rc = -ENOMEM;
+
ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
(void *)(unsigned long)ps_tsk_num,
"power_saving/%d", ps_tsk_num);
- if (ps_tsks[ps_tsk_num]) {
+ rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
+ if (!rc)
ps_tsk_num++;
- return 0;
- }
- return -EINVAL;
+ else
+ ps_tsks[ps_tsk_num] = NULL;
+
+ return rc;
}
static void destroy_power_saving_task(void)
if (ps_tsk_num > 0) {
ps_tsk_num--;
kthread_stop(ps_tsks[ps_tsk_num]);
+ ps_tsks[ps_tsk_num] = NULL;
}
}
}
}
-static int acpi_pad_idle_cpus(unsigned int num_cpus)
+static void acpi_pad_idle_cpus(unsigned int num_cpus)
{
get_online_cpus();
set_power_saving_task_num(num_cpus);
put_online_cpus();
- return 0;
}
static uint32_t acpi_pad_idle_cpus_num(void)
static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- acpi_status status;
union acpi_object *package;
int rev, num, ret = -EINVAL;
- status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
+ return -EINVAL;
+
+ if (!buffer.length || !buffer.pointer)
return -EINVAL;
+
package = buffer.pointer;
if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
goto out;
rev = package->package.elements[0].integer.value;
num = package->package.elements[1].integer.value;
- if (rev != 1)
+ if (rev != 1 || num < 0)
goto out;
*num_cpus = num;
ret = 0;
static void acpi_pad_handle_notify(acpi_handle handle)
{
- int num_cpus, ret;
+ int num_cpus;
uint32_t idle_cpus;
mutex_lock(&isolated_cpus_lock);
mutex_unlock(&isolated_cpus_lock);
return;
}
- ret = acpi_pad_idle_cpus(num_cpus);
+ acpi_pad_idle_cpus(num_cpus);
idle_cpus = acpi_pad_idle_cpus_num();
- if (!ret)
- acpi_pad_ost(handle, 0, idle_cpus);
- else
- acpi_pad_ost(handle, 1, 0);
+ acpi_pad_ost(handle, 0, idle_cpus);
mutex_unlock(&isolated_cpus_lock);
}
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
-#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR
+#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\
+ defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT;
#endif
+
+#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
+#endif
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
return;
if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
-static void acpi_ec_gpe_query(void *ec_cxt);
+static int acpi_ec_sync_query(struct acpi_ec *ec);
-static int ec_check_sci(struct acpi_ec *ec, u8 state)
+static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
- return acpi_os_execute(OSL_EC_BURST_HANDLER,
- acpi_ec_gpe_query, ec);
+ return acpi_ec_sync_query(ec);
}
return 0;
}
{
unsigned long tmp;
int ret = 0;
- pr_debug(PREFIX "transaction start\n");
- /* disable GPE during transaction if storm is detected */
- if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- acpi_disable_gpe(NULL, ec->gpe);
- }
if (EC_FLAGS_MSI)
udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->curr_lock, tmp);
ret = ec_poll(ec);
- pr_debug(PREFIX "transaction end\n");
spin_lock_irqsave(&ec->curr_lock, tmp);
ec->curr = NULL;
spin_unlock_irqrestore(&ec->curr_lock, tmp);
- if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- /* check if we received SCI during transaction */
- ec_check_sci(ec, acpi_ec_read_status(ec));
- /* it is safe to enable GPE outside of transaction */
- acpi_enable_gpe(NULL, ec->gpe);
- } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
- pr_info(PREFIX "GPE storm detected, "
- "transactions will use polling mode\n");
- set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
- }
return ret;
}
status = -ETIME;
goto end;
}
+ pr_debug(PREFIX "transaction start\n");
+ /* disable GPE during transaction if storm is detected */
+ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+ acpi_disable_gpe(NULL, ec->gpe);
+ }
+
status = acpi_ec_transaction_unlocked(ec, t);
+
+ /* check if we received SCI during transaction */
+ ec_check_sci_sync(ec, acpi_ec_read_status(ec));
+ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+ msleep(1);
+ /* it is safe to enable GPE outside of transaction */
+ acpi_enable_gpe(NULL, ec->gpe);
+ } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+ pr_info(PREFIX "GPE storm detected, "
+ "transactions will use polling mode\n");
+ set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
+ }
+ pr_debug(PREFIX "transaction end\n");
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
EXPORT_SYMBOL(ec_transaction);
-static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
{
int result;
u8 d;
.wlen = 0, .rlen = 1};
if (!ec || !data)
return -EINVAL;
-
/*
* Query the EC to find out which _Qxx method we need to evaluate.
* Note that successful completion of the query causes the ACPI_EC_SCI
* bit to be cleared (and thus clearing the interrupt source).
*/
-
- result = acpi_ec_transaction(ec, &t);
+ result = acpi_ec_transaction_unlocked(ec, &t);
if (result)
return result;
-
if (!d)
return -ENODATA;
-
*data = d;
return 0;
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
-static void acpi_ec_gpe_query(void *ec_cxt)
+static void acpi_ec_run(void *cxt)
{
- struct acpi_ec *ec = ec_cxt;
- u8 value = 0;
- struct acpi_ec_query_handler *handler, copy;
-
- if (!ec || acpi_ec_query(ec, &value))
+ struct acpi_ec_query_handler *handler = cxt;
+ if (!handler)
return;
- mutex_lock(&ec->lock);
+ pr_debug(PREFIX "start query execution\n");
+ if (handler->func)
+ handler->func(handler->data);
+ else if (handler->handle)
+ acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
+ pr_debug(PREFIX "stop query execution\n");
+ kfree(handler);
+}
+
+static int acpi_ec_sync_query(struct acpi_ec *ec)
+{
+ u8 value = 0;
+ int status;
+ struct acpi_ec_query_handler *handler, *copy;
+ if ((status = acpi_ec_query_unlocked(ec, &value)))
+ return status;
list_for_each_entry(handler, &ec->list, node) {
if (value == handler->query_bit) {
/* have custom handler for this bit */
- memcpy(©, handler, sizeof(copy));
- mutex_unlock(&ec->lock);
- if (copy.func) {
- copy.func(copy.data);
- } else if (copy.handle) {
- acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
- }
- return;
+ copy = kmalloc(sizeof(*handler), GFP_KERNEL);
+ if (!copy)
+ return -ENOMEM;
+ memcpy(copy, handler, sizeof(*copy));
+ pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value);
+ return acpi_os_execute((copy->func) ?
+ OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
+ acpi_ec_run, copy);
}
}
+ return 0;
+}
+
+static void acpi_ec_gpe_query(void *ec_cxt)
+{
+ struct acpi_ec *ec = ec_cxt;
+ if (!ec)
+ return;
+ mutex_lock(&ec->lock);
+ acpi_ec_sync_query(ec);
mutex_unlock(&ec->lock);
}
+static void acpi_ec_gpe_query(void *ec_cxt);
+
+static int ec_check_sci(struct acpi_ec *ec, u8 state)
+{
+ if (state & ACPI_EC_FLAG_SCI) {
+ if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
+ pr_debug(PREFIX "push gpe query to the queue\n");
+ return acpi_os_execute(OSL_NOTIFY_HANDLER,
+ acpi_ec_gpe_query, ec);
+ }
+ }
+ return 0;
+}
+
static u32 acpi_ec_gpe_handler(void *data)
{
struct acpi_ec *ec = data;
- u8 status;
pr_debug(PREFIX "~~~> interrupt\n");
- status = acpi_ec_read_status(ec);
- advance_transaction(ec, status);
- if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
+ advance_transaction(ec, acpi_ec_read_status(ec));
+ if (ec_transaction_done(ec) &&
+ (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
wake_up(&ec->wait);
- ec_check_sci(ec, status);
+ ec_check_sci(ec, acpi_ec_read_status(ec));
+ }
return ACPI_INTERRUPT_HANDLED;
}
static int acpi_pci_link_add(struct acpi_device *device);
static int acpi_pci_link_remove(struct acpi_device *device, int type);
-static struct acpi_device_id link_device_ids[] = {
+static const struct acpi_device_id link_device_ids[] = {
{"PNP0C0F", 0},
{"", 0},
};
static int acpi_pci_root_remove(struct acpi_device *device, int type);
static int acpi_pci_root_start(struct acpi_device *device);
-static struct acpi_device_id root_device_ids[] = {
+static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static int acpi_power_resume(struct acpi_device *device);
static int acpi_power_open_fs(struct inode *inode, struct file *file);
-static struct acpi_device_id power_device_ids[] = {
+static const struct acpi_device_id power_device_ids[] = {
{ACPI_POWER_HID, 0},
{"", 0},
};
return force_cap_on || cap_in_hardware;
}
-static struct acpi_device_id power_meter_ids[] = {
+static const struct acpi_device_id power_meter_ids[] = {
{"ACPI000D", 0},
{"", 0},
};
kfree(resource->domain_devices);
kobject_put(resource->holders_dir);
+ resource->num_domain_devices = 0;
}
static int read_domain_devices(struct acpi_power_meter_resource *resource)
return res;
error:
- remove_domain_devices(resource);
remove_attrs(resource);
return res;
}
pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
+ /*
+ * FADT specified C2 latency must be less than or equal to
+ * 100 microseconds.
+ */
+ if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+ /* invalidate C2 */
+ pr->power.states[ACPI_STATE_C2].address = 0;
+ }
+
+ /*
+ * FADT supplied C3 latency must be less than or equal to
+ * 1000 microseconds.
+ */
+ if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+ /* invalidate C3 */
+ pr->power.states[ACPI_STATE_C3].address = 0;
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"lvl2[0x%08x] lvl3[0x%08x]\n",
pr->power.states[ACPI_STATE_C2].address,
return status;
}
-static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
-{
-
- if (!cx->address)
- return;
-
- /*
- * C2 latency must be less than or equal to 100
- * microseconds.
- */
- else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "latency too large [%d]\n", cx->latency));
- return;
- }
-
- /*
- * Otherwise we've met all of our C2 requirements.
- * Normalize the C2 latency to expidite policy
- */
- cx->valid = 1;
-
- cx->latency_ticks = cx->latency;
-
- return;
-}
-
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
if (!cx->address)
return;
- /*
- * C3 latency must be less than or equal to 1000
- * microseconds.
- */
- else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "latency too large [%d]\n", cx->latency));
- return;
- }
-
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
break;
case ACPI_STATE_C2:
- acpi_processor_power_verify_c2(cx);
+ if (!cx->address)
+ break;
+ cx->valid = 1;
+ cx->latency_ticks = cx->latency; /* Normalize latency */
break;
case ACPI_STATE_C3:
}
EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
+static int early_pdc_optin;
+static int set_early_pdc_optin(const struct dmi_system_id *id)
+{
+ early_pdc_optin = 1;
+ return 0;
+}
+
+static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
+ {
+ set_early_pdc_optin, "HP Envy", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
+ {
+ set_early_pdc_optin, "HP Pavilion dv6", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
+ {
+ set_early_pdc_optin, "HP Pavilion dv7", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
+ {},
+};
+
static acpi_status
early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
{
return AE_OK;
}
-void acpi_early_processor_set_pdc(void)
+void __init acpi_early_processor_set_pdc(void)
{
/*
* Check whether the system is DMI table. If yes, OSPM
*/
dmi_check_system(processor_idle_dmi_table);
+ /*
+ * Allow systems to opt-in to early _PDC evaluation.
+ */
+ dmi_check_system(early_pdc_optin_table);
+ if (!early_pdc_optin)
+ return;
+
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
-
+ struct acpi_processor *pr = seq->private;
if (!pr)
goto end;
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
+#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER)
struct acpi_battery *battery = &sbs->battery[id];
+#endif
+
#ifdef CONFIG_ACPI_SYSFS_POWER
if (battery->bat.dev) {
if (battery->have_sysfs_alarm)
case ACPI_SBS_CHARGER:
case ACPI_SBS_MANAGER:
case ACPI_SBS_BATTERY:
- acpi_os_execute(OSL_GPE_HANDLER,
+ acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_smbus_callback, hc);
default:;
}
static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+/*
+ * By default, we don't allow duplicate ACPI video bus devices
+ * under the same VGA controller
+ */
+static int allow_duplicates;
+module_param(allow_duplicates, bool, 0644);
+
static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
return AE_OK;
}
+static acpi_status
+acpi_video_bus_match(acpi_handle handle, u32 level, void *context,
+ void **return_value)
+{
+ struct acpi_device *device = context;
+ struct acpi_device *sibling;
+ int result;
+
+ if (handle == device->handle)
+ return AE_CTRL_TERMINATE;
+
+ result = acpi_bus_get_device(handle, &sibling);
+ if (result)
+ return AE_OK;
+
+ if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME))
+ return AE_ALREADY_EXISTS;
+
+ return AE_OK;
+}
+
static int acpi_video_bus_add(struct acpi_device *device)
{
struct acpi_video_bus *video;
struct input_dev *input;
int error;
+ acpi_status status;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE,
+ device->parent->handle, 1,
+ acpi_video_bus_match, NULL,
+ device, NULL);
+ if (status == AE_ALREADY_EXISTS) {
+ printk(KERN_WARNING FW_BUG
+ "Duplicate ACPI video bus devices for the"
+ " same VGA controller, please try module "
+ "parameter \"video.allow_duplicates=1\""
+ "if the current driver doesn't work.\n");
+ if (!allow_duplicates)
+ return -ENODEV;
+ }
video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
if (!video)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
/* determine whether the command is worth retrying */
- if (!(qc->err_mask & AC_ERR_INVALID) &&
- ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+ if (qc->flags & ATA_QCFLAG_IO ||
+ (!(qc->err_mask & AC_ERR_INVALID) &&
+ qc->err_mask != AC_ERR_DEV))
qc->flags |= ATA_QCFLAG_RETRY;
/* accumulate error info */
{
int err;
struct vfsmount *mnt;
+ char options[] = "mode=0755";
err = register_filesystem(&dev_fs_type);
if (err) {
return err;
}
- mnt = kern_mount_data(&dev_fs_type, "mode=0755");
+ mnt = kern_mount_data(&dev_fs_type, options);
if (IS_ERR(mnt)) {
err = PTR_ERR(mnt);
printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err);
* Block size attribute stuff
*/
static ssize_t
-print_block_size(struct sysdev_class *class,
- struct sysdev_class_attribute *class_attr,
- char *buf)
+print_block_size(struct class *class, char *buf)
{
return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
-static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
static int block_size_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &attr_block_size_bytes.attr);
+ &class_attr_block_size_bytes.attr);
}
/*
*/
#ifdef CONFIG_ARCH_MEMORY_PROBE
static ssize_t
-memory_probe_store(struct sysdev_class *class,
- struct sysdev_class_attribute *class_attr,
- const char *buf, size_t count)
+memory_probe_store(struct class *class, const char *buf, size_t count)
{
u64 phys_addr;
int nid;
return count;
}
-static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
+static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
static int memory_probe_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &attr_probe.attr);
+ &class_attr_probe.attr);
}
#else
static inline int memory_probe_init(void)
/* Soft offline a page */
static ssize_t
-store_soft_offline_page(struct sysdev_class *class,
- struct sysdev_class_attribute *class_attr,
- const char *buf, size_t count)
+store_soft_offline_page(struct class *class, const char *buf, size_t count)
{
int ret;
u64 pfn;
/* Forcibly offline a page, including killing processes. */
static ssize_t
-store_hard_offline_page(struct sysdev_class *class,
- struct sysdev_class_attribute *class_attr,
- const char *buf, size_t count)
+store_hard_offline_page(struct class *class, const char *buf, size_t count)
{
int ret;
u64 pfn;
return ret ? ret : count;
}
-static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
-static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
+static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
+static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
static __init int memory_fail_init(void)
{
int err;
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &attr_soft_offline_page.attr);
+ &class_attr_soft_offline_page.attr);
if (!err)
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &attr_hard_offline_page.attr);
+ &class_attr_hard_offline_page.attr);
return err;
}
#else
#
comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected"
- depends on !PROC_FS || !INET || !CONNECTOR
+ depends on PROC_FS='n' || INET='n' || CONNECTOR='n'
config BLK_DEV_DRBD
tristate "DRBD Distributed Replicated Block Device support"
#if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32
#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_BM
#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM
-#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32
+#elif !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32
#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_32
#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32
#else
extern void drbd_suspend_io(struct drbd_conf *mdev);
extern void drbd_resume_io(struct drbd_conf *mdev);
extern char *ppsize(char *buf, unsigned long long size);
-extern sector_t drbd_new_dev_size(struct drbd_conf *,
- struct drbd_backing_dev *);
+extern sector_t drbd_new_dev_size(struct drbd_conf *, struct drbd_backing_dev *, int);
enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 };
-extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local);
+extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *, int force) __must_hold(local);
extern void resync_after_online_grow(struct drbd_conf *);
extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local);
extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role,
dev_err(DEV, "Sending state in drbd_io_error() failed\n");
}
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
lc_destroy(mdev->resync);
mdev->resync = NULL;
lc_destroy(mdev->act_log);
* Returns 0 on success, negative return values indicate errors.
* You should call drbd_md_sync() after calling this function.
*/
-enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local)
+enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev, int force) __must_hold(local)
{
sector_t prev_first_sect, prev_size; /* previous meta location */
sector_t la_size;
/* TODO: should only be some assert here, not (re)init... */
drbd_md_set_sector_offsets(mdev, mdev->ldev);
- size = drbd_new_dev_size(mdev, mdev->ldev);
+ size = drbd_new_dev_size(mdev, mdev->ldev, force);
if (drbd_get_capacity(mdev->this_bdev) != size ||
drbd_bm_capacity(mdev) != size) {
}
sector_t
-drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev, int assume_peer_has_space)
{
sector_t p_size = mdev->p_size; /* partner's disk size. */
sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */
m_size = drbd_get_max_capacity(bdev);
+ if (mdev->state.conn < C_CONNECTED && assume_peer_has_space) {
+ dev_warn(DEV, "Resize while not connected was forced by the user!\n");
+ p_size = m_size;
+ }
+
if (p_size && m_size) {
size = min_t(sector_t, p_size, m_size);
} else {
/* Prevent shrinking of consistent devices ! */
if (drbd_md_test_flag(nbc, MDF_CONSISTENT) &&
- drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) {
+ drbd_new_dev_size(mdev, nbc, 0) < nbc->md.la_size_sect) {
dev_warn(DEV, "refusing to truncate a consistent device\n");
retcode = ERR_DISK_TO_SMALL;
goto force_diskless_dec;
!drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND))
set_bit(USE_DEGR_WFC_T, &mdev->flags);
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, 0);
if (dd == dev_size_error) {
retcode = ERR_NOMEM_BITMAP;
goto force_diskless_dec;
goto fail;
}
- if (crypto_tfm_alg_type(crypto_hash_tfm(tfm)) != CRYPTO_ALG_TYPE_SHASH) {
+ if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) {
retcode = ERR_AUTH_ALG_ND;
goto fail;
}
}
mdev->ldev->dc.disk_size = (sector_t)rs.resize_size;
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, rs.resize_force);
drbd_md_sync(mdev);
put_ldev(mdev);
if (dd == dev_size_error) {
if (mdev->cram_hmac_tfm) {
/* drbd_request_state(mdev, NS(conn, WFAuth)); */
- if (!drbd_do_auth(mdev)) {
+ switch (drbd_do_auth(mdev)) {
+ case -1:
dev_err(DEV, "Authentication of peer failed\n");
return -1;
+ case 0:
+ dev_err(DEV, "Authentication of peer failed, trying again.\n");
+ return 0;
}
}
case WO_bdev_flush:
case WO_drain_io:
- D_ASSERT(rv == FE_STILL_LIVE);
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
- drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+ if (rv == FE_STILL_LIVE) {
+ set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
+ drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+ rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+ }
if (rv == FE_RECYCLED)
return TRUE;
/* Never shrink a device with usable data during connect.
But allow online shrinking if we are connected. */
- if (drbd_new_dev_size(mdev, mdev->ldev) <
+ if (drbd_new_dev_size(mdev, mdev->ldev, 0) <
drbd_get_capacity(mdev->this_bdev) &&
mdev->state.disk >= D_OUTDATED &&
mdev->state.conn < C_CONNECTED) {
#undef min_not_zero
if (get_ldev(mdev)) {
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, 0);
put_ldev(mdev);
if (dd == dev_size_error)
return FALSE;
{
dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n");
dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n");
- return 0;
+ return -1;
}
#else
#define CHALLENGE_LEN 64
+
+/* Return value:
+ 1 - auth succeeded,
+ 0 - failed, try again (network error),
+ -1 - auth failed, don't try again.
+*/
+
static int drbd_do_auth(struct drbd_conf *mdev)
{
char my_challenge[CHALLENGE_LEN]; /* 64 Bytes... */
(u8 *)mdev->net_conf->shared_secret, key_len);
if (rv) {
dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
if (p.length > CHALLENGE_LEN*2) {
dev_err(DEV, "expected AuthChallenge payload too big.\n");
- rv = 0;
+ rv = -1;
goto fail;
}
peers_ch = kmalloc(p.length, GFP_NOIO);
if (peers_ch == NULL) {
dev_err(DEV, "kmalloc of peers_ch failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
response = kmalloc(resp_size, GFP_NOIO);
if (response == NULL) {
dev_err(DEV, "kmalloc of response failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
rv = crypto_hash_digest(&desc, &sg, sg.length, response);
if (rv) {
dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
}
right_response = kmalloc(resp_size, GFP_NOIO);
- if (response == NULL) {
+ if (right_response == NULL) {
dev_err(DEV, "kmalloc of right_response failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
rv = crypto_hash_digest(&desc, &sg, sg.length, right_response);
if (rv) {
dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
if (rv)
dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n",
resp_size, mdev->net_conf->cram_hmac_alg);
+ else
+ rv = -1;
fail:
kfree(peers_ch);
if (agp_off)
return -EINVAL;
- if (gart_iommu_aperture)
- return agp_bridges_found ? 0 : -ENODEV;
-
err = pci_register_driver(&agp_amd64_pci_driver);
if (err < 0)
return err;
return err;
}
+static int __init agp_amd64_mod_init(void)
+{
+ if (gart_iommu_aperture)
+ return agp_bridges_found ? 0 : -ENODEV;
+
+ return agp_amd64_init();
+}
+
static void __exit agp_amd64_cleanup(void)
{
if (gart_iommu_aperture)
pci_unregister_driver(&agp_amd64_pci_driver);
}
-module_init(agp_amd64_init);
+module_init(agp_amd64_mod_init);
module_exit(agp_amd64_cleanup);
MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
dc->open_ttys--;
port->count--;
- tty_port_tty_set(port, NULL);
if (port->count == 0) {
DBG1("close: %d", nport->token_dl);
+ tty_port_tty_set(port, NULL);
spin_lock_irqsave(&dc->spin_mutex, flags);
dc->last_ier &= ~(nport->token_dl);
writew(dc->last_ier, dc->reg_ier);
pid = task_pid(current);
type = PIDTYPE_PID;
}
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
retval = __f_setown(filp, pid, type, 0);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
if (retval)
goto out;
} else {
switch (cmd) {
case MMTIMER_GETOFFSET: /* offset of the counter */
/*
- * UV RTC register is on its own page
+ * Starting with HUB rev 2.0, the UV RTC register is
+ * replicated across all cachelines of it's own page.
+ * This allows faster simultaneous reads from a given socket.
+ *
+ * The offset returned is in 64 bit units.
*/
- if (PAGE_SIZE <= (1 << 16))
- ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1))
- / 8;
+ if (uv_get_min_hub_revision_id() == 1)
+ ret = 0;
else
- ret = -ENOSYS;
+ ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) %
+ PAGE_SIZE) / 8;
break;
case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
break;
- case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
- ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
+ case MMTIMER_MMAPAVAIL:
+ ret = 1;
break;
case MMTIMER_GETCOUNTER:
static int descriptor_count;
static __be32 tmp_config_rom[256];
+/* ROM header, bus info block, root dir header, capabilities = 7 quadlets */
+static size_t config_rom_length = 1 + 4 + 1 + 1;
#define BIB_CRC(v) ((v) << 0)
#define BIB_CRC_LENGTH(v) ((v) << 16)
#define BIB_CMC ((1) << 30)
#define BIB_IMC ((1) << 31)
-static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom)
+static void generate_config_rom(struct fw_card *card, __be32 *config_rom)
{
struct fw_descriptor *desc;
int i, j, k, length;
for (i = 0; i < j; i += length + 1)
length = fw_compute_block_crc(config_rom + i);
- return j;
+ WARN_ON(j != config_rom_length);
}
static void update_config_roms(void)
{
struct fw_card *card;
- size_t length;
list_for_each_entry (card, &card_list, link) {
- length = generate_config_rom(card, tmp_config_rom);
- card->driver->set_config_rom(card, tmp_config_rom, length);
+ generate_config_rom(card, tmp_config_rom);
+ card->driver->set_config_rom(card, tmp_config_rom,
+ config_rom_length);
}
}
+static size_t required_space(struct fw_descriptor *desc)
+{
+ /* descriptor + entry into root dir + optional immediate entry */
+ return desc->length + 1 + (desc->immediate > 0 ? 1 : 0);
+}
+
int fw_core_add_descriptor(struct fw_descriptor *desc)
{
size_t i;
+ int ret;
/*
* Check descriptor is valid; the length of all blocks in the
mutex_lock(&card_mutex);
- list_add_tail(&desc->link, &descriptor_list);
- descriptor_count++;
- if (desc->immediate > 0)
+ if (config_rom_length + required_space(desc) > 256) {
+ ret = -EBUSY;
+ } else {
+ list_add_tail(&desc->link, &descriptor_list);
+ config_rom_length += required_space(desc);
descriptor_count++;
- update_config_roms();
+ if (desc->immediate > 0)
+ descriptor_count++;
+ update_config_roms();
+ ret = 0;
+ }
mutex_unlock(&card_mutex);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(fw_core_add_descriptor);
mutex_lock(&card_mutex);
list_del(&desc->link);
+ config_rom_length -= required_space(desc);
descriptor_count--;
if (desc->immediate > 0)
descriptor_count--;
int fw_card_add(struct fw_card *card,
u32 max_receive, u32 link_speed, u64 guid)
{
- size_t length;
int ret;
card->max_receive = max_receive;
mutex_lock(&card_mutex);
- length = generate_config_rom(card, tmp_config_rom);
- ret = card->driver->enable(card, tmp_config_rom, length);
+ generate_config_rom(card, tmp_config_rom);
+ ret = card->driver->enable(card, tmp_config_rom, config_rom_length);
if (ret == 0)
list_add_tail(&card->link, &card_list);
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include <linux/time.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
client->device->max_speed);
}
+static inline bool is_fcp_request(struct fw_request *request)
+{
+ return request == NULL;
+}
+
static void release_request(struct client *client,
struct client_resource *resource)
{
struct inbound_transaction_resource *r = container_of(resource,
struct inbound_transaction_resource, resource);
- if (r->request)
+ if (is_fcp_request(r->request))
+ kfree(r->data);
+ else
fw_send_response(client->device->card, r->request,
RCODE_CONFLICT_ERROR);
kfree(r);
struct address_handler_resource *handler = callback_data;
struct inbound_transaction_resource *r;
struct inbound_transaction_event *e;
+ void *fcp_frame = NULL;
int ret;
r = kmalloc(sizeof(*r), GFP_ATOMIC);
r->data = payload;
r->length = length;
+ if (is_fcp_request(request)) {
+ /*
+ * FIXME: Let core-transaction.c manage a
+ * single reference-counted copy?
+ */
+ fcp_frame = kmemdup(payload, length, GFP_ATOMIC);
+ if (fcp_frame == NULL)
+ goto failed;
+
+ r->data = fcp_frame;
+ }
+
r->resource.release = release_request;
ret = add_client_resource(handler->client, &r->resource, GFP_ATOMIC);
if (ret < 0)
e->request.closure = handler->closure;
queue_event(handler->client, &e->event,
- &e->request, sizeof(e->request), payload, length);
+ &e->request, sizeof(e->request), r->data, length);
return;
failed:
kfree(r);
kfree(e);
- if (request)
+ kfree(fcp_frame);
+
+ if (!is_fcp_request(request))
fw_send_response(card, request, RCODE_CONFLICT_ERROR);
}
r = container_of(resource, struct inbound_transaction_resource,
resource);
- if (r->request) {
- if (request->length < r->length)
- r->length = request->length;
- if (copy_from_user(r->data, u64_to_uptr(request->data),
- r->length)) {
- ret = -EFAULT;
- kfree(r->request);
- goto out;
- }
- fw_send_response(client->device->card, r->request,
- request->rcode);
+ if (is_fcp_request(r->request))
+ goto out;
+
+ if (request->length < r->length)
+ r->length = request->length;
+ if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) {
+ ret = -EFAULT;
+ kfree(r->request);
+ goto out;
}
+ fw_send_response(client->device->card, r->request, request->rcode);
out:
kfree(r);
#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
if (dev->vendor == PCI_VENDOR_ID_TI &&
- dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+ (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 ||
+ dev->device == PCI_DEVICE_ID_TI_TSB43AB23))
ohci->use_dualbuffer = false;
#endif
return NULL;
}
if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
- printk(KERN_WARNING "integrated sync not supported\n");
- return NULL;
+ printk(KERN_WARNING "composite sync not supported\n");
}
/* it is incorrect if hsync/vsync width is zero */
break;
/* Display: Off; HSync: On, VSync: On */
case FB_BLANK_NORMAL:
- drm_fb_helper_off(info, DRM_MODE_DPMS_ON);
+ drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: Off, VSync: On */
case FB_BLANK_HSYNC_SUSPEND:
if (IS_ERR(obj->filp))
goto free;
- /* Basically we want to disable the OOM killer and handle ENOMEM
- * ourselves by sacrificing pages from cached buffers.
- * XXX shmem_file_[gs]et_gfp_mask()
- */
- mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping,
- GFP_HIGHUSER |
- __GFP_COLD |
- __GFP_FS |
- __GFP_RECLAIMABLE |
- __GFP_NORETRY |
- __GFP_NOWARN |
- __GFP_NOMEMALLOC);
-
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
obj = obj_priv->obj;
if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret) {
DRM_ERROR("Failed to get pages: %d\n", ret);
spin_unlock(&dev_priv->mm.active_list_lock);
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
-int i915_gem_object_get_pages(struct drm_gem_object *obj);
+int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
void i915_gem_object_put_pages(struct drm_gem_object *obj);
void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
void i915_gem_object_flush_write_domain(struct drm_gem_object *obj);
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret != 0)
goto fail_unlock;
return ret;
}
-static inline gfp_t
-i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj)
-{
- return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping);
-}
-
-static inline void
-i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp)
-{
- mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp);
-}
-
static int
i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj)
{
int ret;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN);
/* If we've insufficient memory to map in the pages, attempt
* to make some space by throwing out some old buffers.
*/
if (ret == -ENOMEM) {
struct drm_device *dev = obj->dev;
- gfp_t gfp;
ret = i915_gem_evict_something(dev, obj->size);
if (ret)
return ret;
- gfp = i915_gem_object_get_page_gfp_mask(obj);
- i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY);
- ret = i915_gem_object_get_pages(obj);
- i915_gem_object_set_page_gfp_mask (obj, gfp);
+ ret = i915_gem_object_get_pages(obj, 0);
}
return ret;
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret != 0)
goto fail_unlock;
}
int
-i915_gem_object_get_pages(struct drm_gem_object *obj)
+i915_gem_object_get_pages(struct drm_gem_object *obj,
+ gfp_t gfpmask)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int page_count, i;
inode = obj->filp->f_path.dentry->d_inode;
mapping = inode->i_mapping;
for (i = 0; i < page_count; i++) {
- page = read_mapping_page(mapping, i, NULL);
+ page = read_cache_page_gfp(mapping, i,
+ mapping_gfp_mask (mapping) |
+ __GFP_COLD |
+ gfpmask);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
i915_gem_object_put_pages(obj);
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_mm_node *free_space;
- bool retry_alloc = false;
+ gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN;
int ret;
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
- if (retry_alloc) {
- i915_gem_object_set_page_gfp_mask (obj,
- i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY);
- }
- ret = i915_gem_object_get_pages(obj);
- if (retry_alloc) {
- i915_gem_object_set_page_gfp_mask (obj,
- i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY);
- }
+ ret = i915_gem_object_get_pages(obj, gfpmask);
if (ret) {
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
ret = i915_gem_evict_something(dev, obj->size);
if (ret) {
/* now try to shrink everyone else */
- if (! retry_alloc) {
- retry_alloc = true;
- goto search_free;
+ if (gfpmask) {
+ gfpmask = 0;
+ goto search_free;
}
return ret;
if (!obj_priv->phys_obj)
return;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret)
goto out;
obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
obj_priv->phys_obj->cur_obj = obj;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret) {
DRM_ERROR("failed to get page list\n");
goto out;
struct drm_device *dev = bios->dev;
/* C51 has misaligned regs on purpose. Marvellous */
- if (reg & 0x2 || (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) {
- NV_ERROR(dev, "========== misaligned reg 0x%08X ==========\n",
- reg);
- return 0;
- }
- /*
- * Warn on C51 regs that have not been verified accessible in
- * mmiotracing
- */
+ if (reg & 0x2 ||
+ (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51))
+ NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
+
+ /* warn on C51 regs that haven't been verified accessible in tracing */
if (reg & 0x1 && dev_priv->VBIOS.pub.chip_version == 0x51 &&
reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
reg);
- /* Trust the init scripts on G80 */
- if (dev_priv->card_type >= NV_50)
- return 1;
-
- #define WITHIN(x, y, z) ((x >= y) && (x < y + z))
- if (WITHIN(reg, NV_PMC_OFFSET, NV_PMC_SIZE))
- return 1;
- if (WITHIN(reg, NV_PBUS_OFFSET, NV_PBUS_SIZE))
- return 1;
- if (WITHIN(reg, NV_PFIFO_OFFSET, NV_PFIFO_SIZE))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x30 &&
- (WITHIN(reg, 0x4000, 0x600) || reg == 0x00004600))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x40 &&
- WITHIN(reg, 0xc000, 0x48))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0000d204)
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x40) {
- if (reg == 0x00011014 || reg == 0x00020328)
- return 1;
- if (WITHIN(reg, 0x88000, NV_PBUS_SIZE)) /* new PBUS */
- return 1;
+ if (reg >= (8*1024*1024)) {
+ NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
+ return 0;
}
- if (WITHIN(reg, NV_PFB_OFFSET, NV_PFB_SIZE))
- return 1;
- if (WITHIN(reg, NV_PEXTDEV_OFFSET, NV_PEXTDEV_SIZE))
- return 1;
- if (WITHIN(reg, NV_PCRTC0_OFFSET, NV_PCRTC0_SIZE * 2))
- return 1;
- if (WITHIN(reg, NV_PRAMDAC0_OFFSET, NV_PRAMDAC0_SIZE * 2))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0070fff0)
- return 1;
- if (dev_priv->VBIOS.pub.chip_version == 0x51 &&
- WITHIN(reg, NV_PRAMIN_OFFSET, NV_PRAMIN_SIZE))
- return 1;
- #undef WITHIN
- NV_ERROR(dev, "========== unknown reg 0x%08X ==========\n", reg);
-
- return 0;
+ return 1;
}
static bool
}
#ifdef __powerpc__
/* Powerbook specific quirks */
- if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0329))
- nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
- if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) {
- if (script == LVDS_PANEL_ON) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) | (1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
- }
- if (script == LVDS_PANEL_OFF) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) & ~(1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
+ if ((dev->pci_device & 0xffff) == 0x0179 ||
+ (dev->pci_device & 0xffff) == 0x0189 ||
+ (dev->pci_device & 0xffff) == 0x0329) {
+ if (script == LVDS_RESET) {
+ nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
+
+ } else if (script == LVDS_PANEL_ON) {
+ bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+ bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+ | (1 << 31));
+ bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+ bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
+
+ } else if (script == LVDS_PANEL_OFF) {
+ bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+ bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+ & ~(1 << 31));
+ bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+ bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
}
}
#endif
parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb,
uint32_t conn, uint32_t conf, struct dcb_entry *entry)
{
- if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 &&
- conn != 0xf2204301 && conn != 0xf2204311 && conn != 0xf2208001 &&
- conn != 0xf2244001 && conn != 0xf2244301 && conn != 0xf2244311 &&
- conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011 &&
- conn != 0xf2045ff2 && conn != 0xf2045f14 && conn != 0xf207df14 &&
- conn != 0xf2205004 && conn != 0xf2209004) {
- NV_ERROR(dev, "Unknown DCB 1.5 entry, please report\n");
-
- /* cause output setting to fail for !TV, so message is seen */
- if ((conn & 0xf) != 0x1)
- dcb->entries = 0;
-
- return false;
- }
- /* most of the below is a "best guess" atm */
- entry->type = conn & 0xf;
- if (entry->type == 2)
- /* another way of specifying straps based lvds... */
+ switch (conn & 0x0000000f) {
+ case 0:
+ entry->type = OUTPUT_ANALOG;
+ break;
+ case 1:
+ entry->type = OUTPUT_TV;
+ break;
+ case 2:
+ case 3:
entry->type = OUTPUT_LVDS;
- if (entry->type == 4) { /* digital */
- if (conn & 0x10)
- entry->type = OUTPUT_LVDS;
- else
+ break;
+ case 4:
+ switch ((conn & 0x000000f0) >> 4) {
+ case 0:
entry->type = OUTPUT_TMDS;
+ break;
+ case 1:
+ entry->type = OUTPUT_LVDS;
+ break;
+ default:
+ NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
+ (conn & 0x000000f0) >> 4);
+ return false;
+ }
+ break;
+ default:
+ NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
+ return false;
}
- /* what's in bits 5-13? could be some encoder maker thing, in tv case */
- entry->i2c_index = (conn >> 14) & 0xf;
- /* raw heads field is in range 0-1, so move to 1-2 */
- entry->heads = ((conn >> 18) & 0x7) + 1;
- entry->location = (conn >> 21) & 0xf;
- /* unused: entry->bus = (conn >> 25) & 0x7; */
- /* set or to be same as heads -- hopefully safe enough */
- entry->or = entry->heads;
+
+ entry->i2c_index = (conn & 0x0003c000) >> 14;
+ entry->heads = ((conn & 0x001c0000) >> 18) + 1;
+ entry->or = entry->heads; /* same as heads, hopefully safe enough */
+ entry->location = (conn & 0x01e00000) >> 21;
+ entry->bus = (conn & 0x0e000000) >> 25;
entry->duallink_possible = false;
switch (entry->type) {
case OUTPUT_ANALOG:
entry->crtconf.maxfreq = (conf & 0xffff) * 10;
break;
- case OUTPUT_LVDS:
- /*
- * This is probably buried in conn's unknown bits.
- * This will upset EDID-ful models, if they exist
- */
- entry->lvdsconf.use_straps_for_mode = true;
- entry->lvdsconf.use_power_scripts = true;
+ case OUTPUT_TV:
+ entry->tvconf.has_component_output = false;
break;
case OUTPUT_TMDS:
/*
*/
fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
break;
- case OUTPUT_TV:
- entry->tvconf.has_component_output = false;
+ case OUTPUT_LVDS:
+ if ((conn & 0x00003f00) != 0x10)
+ entry->lvdsconf.use_straps_for_mode = true;
+ entry->lvdsconf.use_power_scripts = true;
+ break;
+ default:
break;
}
dcb->entries = newentries;
}
-static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
+static int
+parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
struct bios_parsed_dcb *bdcb = &bios->bdcb;
struct parsed_dcb *dcb;
- uint16_t dcbptr, i2ctabptr = 0;
+ uint16_t dcbptr = 0, i2ctabptr = 0;
uint8_t *dcbtable;
uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
bool configblock = true;
dcb->entries = 0;
/* get the offset from 0x36 */
- dcbptr = ROM16(bios->data[0x36]);
+ if (dev_priv->card_type > NV_04) {
+ dcbptr = ROM16(bios->data[0x36]);
+ if (dcbptr == 0x0000)
+ NV_WARN(dev, "No output data (DCB) found in BIOS\n");
+ }
+ /* this situation likely means a really old card, pre DCB */
if (dcbptr == 0x0) {
- NV_WARN(dev, "No output data (DCB) found in BIOS, "
- "assuming a CRT output exists\n");
- /* this situation likely means a really old card, pre DCB */
+ NV_INFO(dev, "Assuming a CRT output exists\n");
fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
- if (nv04_tv_identify(dev,
- bios->legacy.i2c_indices.tv) >= 0)
+ if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
fabricate_tv_output(dcb, twoHeads);
return 0;
ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL,
evict, no_wait, new_mem);
+ if (nvbo->channel && nvbo->channel != chan)
+ ret = nouveau_fence_wait(fence, NULL, false, false);
nouveau_fence_unref((void *)&fence);
return ret;
}
*
*/
+#include <acpi/button.h>
+
#include "drmP.h"
#include "drm_edid.h"
#include "drm_crtc_helper.h"
+
#include "nouveau_reg.h"
#include "nouveau_drv.h"
#include "nouveau_encoder.h"
static void
nouveau_connector_destroy(struct drm_connector *drm_connector)
{
- struct nouveau_connector *connector = nouveau_connector(drm_connector);
- struct drm_device *dev = connector->base.dev;
+ struct nouveau_connector *nv_connector =
+ nouveau_connector(drm_connector);
+ struct drm_device *dev = nv_connector->base.dev;
NV_DEBUG_KMS(dev, "\n");
- if (!connector)
+ if (!nv_connector)
return;
+ kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
kfree(drm_connector);
if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
if (nv_encoder && nv_connector->native_mode) {
+#ifdef CONFIG_ACPI
+ if (!nouveau_ignorelid && !acpi_lid_open())
+ return connector_status_disconnected;
+#endif
nouveau_connector_set_encoder(connector, nv_encoder);
return connector_status_connected;
}
+ /* Cleanup the previous EDID block. */
+ if (nv_connector->edid) {
+ drm_mode_connector_update_edid_property(connector, NULL);
+ kfree(nv_connector->edid);
+ nv_connector->edid = NULL;
+ }
+
i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
if (i2c) {
nouveau_connector_ddc_prepare(connector, &flags);
if (!nv_connector->edid) {
NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
drm_get_connector_name(connector));
- return connector_status_disconnected;
+ goto detect_analog;
}
if (nv_encoder->dcb->type == OUTPUT_DP &&
return connector_status_connected;
}
+detect_analog:
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
if (!nv_encoder)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
*/
if (!nv_connector->edid && !nv_connector->native_mode &&
!dev_priv->VBIOS.pub.fp_no_ddc) {
- nv_connector->edid =
+ struct edid *edid =
(struct edid *)nouveau_bios_embedded_edid(dev);
+ if (edid) {
+ nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ *(nv_connector->edid) = *edid;
+ }
}
if (!nv_connector->edid)
chan->dma.cur += nr_dwords;
}
-static inline bool
-READ_GET(struct nouveau_channel *chan, uint32_t *get)
+/* Fetch and adjust GPU GET pointer
+ *
+ * Returns:
+ * value >= 0, the adjusted GET pointer
+ * -EINVAL if GET pointer currently outside main push buffer
+ * -EBUSY if timeout exceeded
+ */
+static inline int
+READ_GET(struct nouveau_channel *chan, uint32_t *prev_get, uint32_t *timeout)
{
uint32_t val;
val = nvchan_rd32(chan, chan->user_get);
- if (val < chan->pushbuf_base ||
- val > chan->pushbuf_base + (chan->dma.max << 2)) {
- /* meaningless to dma_wait() except to know whether the
- * GPU has stalled or not
- */
- *get = val;
- return false;
+
+ /* reset counter as long as GET is still advancing, this is
+ * to avoid misdetecting a GPU lockup if the GPU happens to
+ * just be processing an operation that takes a long time
+ */
+ if (val != *prev_get) {
+ *prev_get = val;
+ *timeout = 0;
+ }
+
+ if ((++*timeout & 0xff) == 0) {
+ DRM_UDELAY(1);
+ if (*timeout > 100000)
+ return -EBUSY;
}
- *get = (val - chan->pushbuf_base) >> 2;
- return true;
+ if (val < chan->pushbuf_base ||
+ val > chan->pushbuf_base + (chan->dma.max << 2))
+ return -EINVAL;
+
+ return (val - chan->pushbuf_base) >> 2;
}
int
nouveau_dma_wait(struct nouveau_channel *chan, int size)
{
- uint32_t get, prev_get = 0, cnt = 0;
- bool get_valid;
+ uint32_t prev_get = 0, cnt = 0;
+ int get;
while (chan->dma.free < size) {
- /* reset counter as long as GET is still advancing, this is
- * to avoid misdetecting a GPU lockup if the GPU happens to
- * just be processing an operation that takes a long time
- */
- get_valid = READ_GET(chan, &get);
- if (get != prev_get) {
- prev_get = get;
- cnt = 0;
- }
-
- if ((++cnt & 0xff) == 0) {
- DRM_UDELAY(1);
- if (cnt > 100000)
- return -EBUSY;
- }
+ get = READ_GET(chan, &prev_get, &cnt);
+ if (unlikely(get == -EBUSY))
+ return -EBUSY;
/* loop until we have a usable GET pointer. the value
* we read from the GPU may be outside the main ring if
* from the SKIPS area, so the code below doesn't have to deal
* with some fun corner cases.
*/
- if (!get_valid || get < NOUVEAU_DMA_SKIPS)
+ if (unlikely(get == -EINVAL) || get < NOUVEAU_DMA_SKIPS)
continue;
if (get <= chan->dma.cur) {
* after processing the currently pending commands.
*/
OUT_RING(chan, chan->pushbuf_base | 0x20000000);
+
+ /* wait for GET to depart from the skips area.
+ * prevents writing GET==PUT and causing a race
+ * condition that causes us to think the GPU is
+ * idle when it's not.
+ */
+ do {
+ get = READ_GET(chan, &prev_get, &cnt);
+ if (unlikely(get == -EBUSY))
+ return -EBUSY;
+ if (unlikely(get == -EINVAL))
+ continue;
+ } while (get <= NOUVEAU_DMA_SKIPS);
WRITE_PUT(NOUVEAU_DMA_SKIPS);
/* we're now submitting commands at the start of
if (!nv_wait(NV50_AUXCH_CTRL(index), 0x00010000, 0x00000000)) {
NV_ERROR(dev, "expected bit 16 == 0, got 0x%08x\n",
nv_rd32(dev, NV50_AUXCH_CTRL(index)));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
udelay(400);
break;
}
+ if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
+
if (cmd & 1) {
for (i = 0; i < 4; i++) {
data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
int nouveau_uscript_tmds = -1;
module_param_named(uscript_tmds, nouveau_uscript_tmds, int, 0400);
+MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
+int nouveau_ignorelid = 0;
+module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
+
MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
"\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
"\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
void __iomem *ramin;
uint32_t ramin_size;
+ struct nouveau_bo *vga_ram;
+
struct workqueue_struct *wq;
struct work_struct irq_work;
extern int nouveau_reg_debug;
extern char *nouveau_vbios;
extern int nouveau_ctxfw;
+extern int nouveau_ignorelid;
/* nouveau_state.c */
extern void nouveau_preclose(struct drm_device *dev, struct drm_file *);
else {
NV_ERROR(dev, "invalid valid domains: 0x%08x\n",
b->valid_domains);
+ list_add_tail(&nvbo->entry, &op->both_list);
validate_fini(op, NULL);
return -EINVAL;
}
static int
nouveau_gem_pushbuf_reloc_apply(struct nouveau_channel *chan, int nr_bo,
struct drm_nouveau_gem_pushbuf_bo *bo,
- int nr_relocs, uint64_t ptr_relocs,
- int nr_dwords, int first_dword,
+ unsigned nr_relocs, uint64_t ptr_relocs,
+ unsigned nr_dwords, unsigned first_dword,
uint32_t *pushbuf, bool is_iomem)
{
struct drm_nouveau_gem_pushbuf_reloc *reloc = NULL;
struct drm_device *dev = chan->dev;
- int ret = 0, i;
+ int ret = 0;
+ unsigned i;
reloc = u_memcpya(ptr_relocs, nr_relocs, sizeof(*reloc));
if (IS_ERR(reloc))
}
pbbo = nouveau_gem_object(gem);
+ if ((req->offset & 3) || req->nr_dwords < 2 ||
+ (unsigned long)req->offset > (unsigned long)pbbo->bo.mem.size ||
+ (unsigned long)req->nr_dwords >
+ ((unsigned long)(pbbo->bo.mem.size - req->offset ) >> 2)) {
+ NV_ERROR(dev, "pb call misaligned or out of bounds: "
+ "%d + %d * 4 > %ld\n",
+ req->offset, req->nr_dwords, pbbo->bo.mem.size);
+ ret = -EINVAL;
+ drm_gem_object_unreference(gem);
+ goto out;
+ }
+
ret = ttm_bo_reserve(&pbbo->bo, false, false, true,
chan->fence.sequence);
if (ret) {
if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) {
if (nouveau_pgraph_intr_swmthd(dev, &trap))
unhandled = 1;
+ } else if (nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) {
+ uint32_t v = nv_rd32(dev, 0x402000);
+ nv_wr32(dev, 0x402000, v);
+
+ /* dump the error anyway for now: it's useful for
+ Gallium development */
+ unhandled = 1;
} else {
unhandled = 1;
}
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- if (dev_priv->ttm.bdev.man[TTM_PL_PRIV0].has_type)
- ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_PRIV0);
- ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
+ nouveau_bo_unpin(dev_priv->vga_ram);
+ nouveau_bo_ref(NULL, &dev_priv->vga_ram);
ttm_bo_device_release(&dev_priv->ttm.bdev);
return ret;
}
+ ret = nouveau_bo_new(dev, NULL, 256*1024, 0, TTM_PL_FLAG_VRAM,
+ 0, 0, true, true, &dev_priv->vga_ram);
+ if (ret == 0)
+ ret = nouveau_bo_pin(dev_priv->vga_ram, TTM_PL_FLAG_VRAM);
+ if (ret) {
+ NV_WARN(dev, "failed to reserve VGA memory\n");
+ nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+ }
+
/* GART */
#if !defined(__powerpc__) && !defined(__ia64__)
if (drm_device_is_agp(dev) && dev->agp) {
dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1),
drm_get_resource_len(dev, 1),
DRM_MTRR_WC);
+
return 0;
}
engine->mc.takedown(dev);
mutex_lock(&dev->struct_mutex);
+ ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
mutex_unlock(&dev->struct_mutex);
nouveau_sgdma_takedown(dev);
* of vram. For now, only reserve a small piece until we know
* more about what each chipset requires.
*/
- switch (dev_priv->chipset & 0xf0) {
+ switch (dev_priv->chipset) {
case 0x40:
case 0x47:
case 0x49:
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_encoder *encoder;
+ uint32_t dac = 0, sor = 0;
NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- if (drm_helper_encoder_in_use(encoder))
+ if (!drm_helper_encoder_in_use(encoder))
continue;
+ if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+ nv_encoder->dcb->type == OUTPUT_TV)
+ dac |= (1 << nv_encoder->or);
+ else
+ sor |= (1 << nv_encoder->or);
+ }
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+ if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+ nv_encoder->dcb->type == OUTPUT_TV) {
+ if (dac & (1 << nv_encoder->or))
+ continue;
+ } else {
+ if (sor & (1 << nv_encoder->or))
+ continue;
+ }
+
nv_encoder->disconnect(nv_encoder);
}
return ret;
ramfc = chan->ramfc->gpuobj;
- ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 256,
+ ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 1024,
0, &chan->cache);
if (ret)
return ret;
nv_wr32(dev, 0x400804, 0xc0000000);
nv_wr32(dev, 0x406800, 0xc0000000);
nv_wr32(dev, 0x400c04, 0xc0000000);
- nv_wr32(dev, 0x401804, 0xc0000000);
+ nv_wr32(dev, 0x401800, 0xc0000000);
nv_wr32(dev, 0x405018, 0xc0000000);
nv_wr32(dev, 0x402000, 0xc0000000);
return 0;
inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE;
+ nouveau_wait_for_idle(dev);
nv_wr32(dev, 0x400500, fifo & ~1);
nv_wr32(dev, 0x400784, inst);
nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20);
{
struct drm_device *dev = encoder->dev;
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_encoder *enc;
uint32_t val;
int or = nv_encoder->or;
NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode);
+ nv_encoder->last_dpms = mode;
+ list_for_each_entry(enc, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nvenc = nouveau_encoder(enc);
+
+ if (nvenc == nv_encoder ||
+ nvenc->dcb->or != nv_encoder->dcb->or)
+ continue;
+
+ if (nvenc->last_dpms == DRM_MODE_DPMS_ON)
+ return;
+ }
+
/* wait for it to be done */
if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or),
NV50_PDISPLAY_SOR_DPMS_CTRL_PENDING, 0)) {
case ATOM_WS_ATTRIBUTES:
val = gctx->io_attr;
break;
+ case ATOM_WS_REGPTR:
+ val = gctx->reg_block;
+ break;
default:
val = ctx->ws[idx];
}
return atom_get_src_int(ctx, attr, ptr, NULL, 1);
}
+static uint32_t atom_get_src_direct(atom_exec_context *ctx, uint8_t align, int *ptr)
+{
+ uint32_t val = 0xCDCDCDCD;
+
+ switch (align) {
+ case ATOM_SRC_DWORD:
+ val = U32(*ptr);
+ (*ptr) += 4;
+ break;
+ case ATOM_SRC_WORD0:
+ case ATOM_SRC_WORD8:
+ case ATOM_SRC_WORD16:
+ val = U16(*ptr);
+ (*ptr) += 2;
+ break;
+ case ATOM_SRC_BYTE0:
+ case ATOM_SRC_BYTE8:
+ case ATOM_SRC_BYTE16:
+ case ATOM_SRC_BYTE24:
+ val = U8(*ptr);
+ (*ptr)++;
+ break;
+ }
+ return val;
+}
+
static uint32_t atom_get_dst(atom_exec_context *ctx, int arg, uint8_t attr,
int *ptr, uint32_t *saved, int print)
{
case ATOM_WS_ATTRIBUTES:
gctx->io_attr = val;
break;
+ case ATOM_WS_REGPTR:
+ gctx->reg_block = val;
+ break;
default:
ctx->ws[idx] = val;
}
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
SDEBUG(" src1: ");
- src1 = atom_get_src(ctx, attr, ptr);
+ src1 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr);
SDEBUG(" src2: ");
src2 = atom_get_src(ctx, attr, ptr);
dst &= src1;
SDEBUG(" base: 0x%04X\n", ctx->ctx->reg_block);
}
+static void atom_op_shift_left(atom_exec_context *ctx, int *ptr, int arg)
+{
+ uint8_t attr = U8((*ptr)++), shift;
+ uint32_t saved, dst;
+ int dptr = *ptr;
+ attr &= 0x38;
+ attr |= atom_def_dst[attr >> 3] << 6;
+ SDEBUG(" dst: ");
+ dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+ SDEBUG(" shift: %d\n", shift);
+ dst <<= shift;
+ SDEBUG(" dst: ");
+ atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_shift_right(atom_exec_context *ctx, int *ptr, int arg)
+{
+ uint8_t attr = U8((*ptr)++), shift;
+ uint32_t saved, dst;
+ int dptr = *ptr;
+ attr &= 0x38;
+ attr |= atom_def_dst[attr >> 3] << 6;
+ SDEBUG(" dst: ");
+ dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+ SDEBUG(" shift: %d\n", shift);
+ dst >>= shift;
+ SDEBUG(" dst: ");
+ atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg)
{
uint8_t attr = U8((*ptr)++), shift;
attr |= atom_def_dst[attr >> 3] << 6;
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
- shift = U8((*ptr)++);
+ shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst <<= shift;
SDEBUG(" dst: ");
attr |= atom_def_dst[attr >> 3] << 6;
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
- shift = U8((*ptr)++);
+ shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst >>= shift;
SDEBUG(" dst: ");
atom_op_or, ATOM_ARG_FB}, {
atom_op_or, ATOM_ARG_PLL}, {
atom_op_or, ATOM_ARG_MC}, {
- atom_op_shl, ATOM_ARG_REG}, {
- atom_op_shl, ATOM_ARG_PS}, {
- atom_op_shl, ATOM_ARG_WS}, {
- atom_op_shl, ATOM_ARG_FB}, {
- atom_op_shl, ATOM_ARG_PLL}, {
- atom_op_shl, ATOM_ARG_MC}, {
- atom_op_shr, ATOM_ARG_REG}, {
- atom_op_shr, ATOM_ARG_PS}, {
- atom_op_shr, ATOM_ARG_WS}, {
- atom_op_shr, ATOM_ARG_FB}, {
- atom_op_shr, ATOM_ARG_PLL}, {
- atom_op_shr, ATOM_ARG_MC}, {
+ atom_op_shift_left, ATOM_ARG_REG}, {
+ atom_op_shift_left, ATOM_ARG_PS}, {
+ atom_op_shift_left, ATOM_ARG_WS}, {
+ atom_op_shift_left, ATOM_ARG_FB}, {
+ atom_op_shift_left, ATOM_ARG_PLL}, {
+ atom_op_shift_left, ATOM_ARG_MC}, {
+ atom_op_shift_right, ATOM_ARG_REG}, {
+ atom_op_shift_right, ATOM_ARG_PS}, {
+ atom_op_shift_right, ATOM_ARG_WS}, {
+ atom_op_shift_right, ATOM_ARG_FB}, {
+ atom_op_shift_right, ATOM_ARG_PLL}, {
+ atom_op_shift_right, ATOM_ARG_MC}, {
atom_op_mul, ATOM_ARG_REG}, {
atom_op_mul, ATOM_ARG_PS}, {
atom_op_mul, ATOM_ARG_WS}, {
SDEBUG(">> execute %04X (len %d, WS %d, PS %d)\n", base, len, ws, ps);
- /* reset reg block */
- ctx->reg_block = 0;
ectx.ctx = ctx;
ectx.ps_shift = ps / 4;
ectx.start = base;
void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
{
mutex_lock(&ctx->mutex);
+ /* reset reg block */
+ ctx->reg_block = 0;
+ /* reset fb window */
+ ctx->fb_base = 0;
+ /* reset io mode */
+ ctx->io_mode = ATOM_IO_MM;
atom_execute_table_locked(ctx, index, params);
mutex_unlock(&ctx->mutex);
}
#define ATOM_WS_AND_MASK 0x45
#define ATOM_WS_FB_WINDOW 0x46
#define ATOM_WS_ATTRIBUTES 0x47
+#define ATOM_WS_REGPTR 0x48
#define ATOM_IIO_NOP 0
#define ATOM_IIO_START 1
args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
args.ucCRTC = radeon_crtc->crtc_id;
- printk("executing set crtc dtd timing\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
args.ucCRTC = radeon_crtc->crtc_id;
- printk("executing set crtc timing\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
}
}
-void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+union adjust_pixel_clock {
+ ADJUST_DISPLAY_PLL_PS_ALLOCATION v1;
+};
+
+static u32 atombios_adjust_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct radeon_pll *pll)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *encoder = NULL;
struct radeon_encoder *radeon_encoder = NULL;
- uint8_t frev, crev;
- int index;
- SET_PIXEL_CLOCK_PS_ALLOCATION args;
- PIXEL_CLOCK_PARAMETERS *spc1_ptr;
- PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr;
- PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr;
- uint32_t pll_clock = mode->clock;
- uint32_t adjusted_clock;
- uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
- struct radeon_pll *pll;
- int pll_flags = 0;
+ u32 adjusted_clock = mode->clock;
- memset(&args, 0, sizeof(args));
+ /* reset the pll flags */
+ pll->flags = 0;
if (ASIC_IS_AVIVO(rdev)) {
if ((rdev->family == CHIP_RS600) ||
(rdev->family == CHIP_RS690) ||
(rdev->family == CHIP_RS740))
- pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
- RADEON_PLL_PREFER_CLOSEST_LOWER);
+ pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ RADEON_PLL_PREFER_CLOSEST_LOWER);
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
} else {
- pll_flags |= RADEON_PLL_LEGACY;
+ pll->flags |= RADEON_PLL_LEGACY;
if (mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
- if (!ASIC_IS_AVIVO(rdev)) {
- if (encoder->encoder_type !=
- DRM_MODE_ENCODER_DAC)
- pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
- if (encoder->encoder_type ==
- DRM_MODE_ENCODER_LVDS)
- pll_flags |= RADEON_PLL_USE_REF_DIV;
- }
radeon_encoder = to_radeon_encoder(encoder);
+ if (ASIC_IS_AVIVO(rdev)) {
+ /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
+ adjusted_clock = mode->clock * 2;
+ } else {
+ if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
+ pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
+ if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
+ pll->flags |= RADEON_PLL_USE_REF_DIV;
+ }
break;
}
}
* special hw requirements.
*/
if (ASIC_IS_DCE3(rdev)) {
- ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args;
+ union adjust_pixel_clock args;
+ struct radeon_encoder_atom_dig *dig;
+ u8 frev, crev;
+ int index;
- if (!encoder)
- return;
-
- memset(&adjust_pll_args, 0, sizeof(adjust_pll_args));
- adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10);
- adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id;
- adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ if (!radeon_encoder->enc_priv)
+ return adjusted_clock;
+ dig = radeon_encoder->enc_priv;
index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
- atom_execute_table(rdev->mode_info.atom_context,
- index, (uint32_t *)&adjust_pll_args);
- adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10;
- } else {
- /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
- if (ASIC_IS_AVIVO(rdev) &&
- (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1))
- adjusted_clock = mode->clock * 2;
- else
- adjusted_clock = mode->clock;
+ atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+ &crev);
+
+ memset(&args, 0, sizeof(args));
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ case 2:
+ args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v1.ucTransmitterID = radeon_encoder->encoder_id;
+ args.v1.ucEncodeMode = atombios_get_encoder_mode(encoder);
+
+ atom_execute_table(rdev->mode_info.atom_context,
+ index, (uint32_t *)&args);
+ adjusted_clock = le16_to_cpu(args.v1.usPixelClock) * 10;
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+ return adjusted_clock;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+ return adjusted_clock;
+ }
}
+ return adjusted_clock;
+}
+
+union set_pixel_clock {
+ SET_PIXEL_CLOCK_PS_ALLOCATION base;
+ PIXEL_CLOCK_PARAMETERS v1;
+ PIXEL_CLOCK_PARAMETERS_V2 v2;
+ PIXEL_CLOCK_PARAMETERS_V3 v3;
+};
+
+void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_encoder *encoder = NULL;
+ struct radeon_encoder *radeon_encoder = NULL;
+ u8 frev, crev;
+ int index;
+ union set_pixel_clock args;
+ u32 pll_clock = mode->clock;
+ u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
+ struct radeon_pll *pll;
+ u32 adjusted_clock;
+
+ memset(&args, 0, sizeof(args));
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->crtc == crtc) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ break;
+ }
+ }
+
+ if (!radeon_encoder)
+ return;
if (radeon_crtc->crtc_id == 0)
pll = &rdev->clock.p1pll;
else
pll = &rdev->clock.p2pll;
+ /* adjust pixel clock as needed */
+ adjusted_clock = atombios_adjust_pll(crtc, mode, pll);
+
if (ASIC_IS_AVIVO(rdev)) {
if (radeon_new_pll)
radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock,
&fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
else
radeon_compute_pll(pll, adjusted_clock, &pll_clock,
&fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
} else
radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
case 1:
switch (crev) {
case 1:
- spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput;
- spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc1_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc1_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc1_ptr->ucFracFbDiv = frac_fb_div;
- spc1_ptr->ucPostDiv = post_div;
- spc1_ptr->ucPpll =
+ args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v1.usRefDiv = cpu_to_le16(ref_div);
+ args.v1.usFbDiv = cpu_to_le16(fb_div);
+ args.v1.ucFracFbDiv = frac_fb_div;
+ args.v1.ucPostDiv = post_div;
+ args.v1.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc1_ptr->ucCRTC = radeon_crtc->crtc_id;
- spc1_ptr->ucRefDivSrc = 1;
+ args.v1.ucCRTC = radeon_crtc->crtc_id;
+ args.v1.ucRefDivSrc = 1;
break;
case 2:
- spc2_ptr =
- (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput;
- spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc2_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc2_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc2_ptr->ucFracFbDiv = frac_fb_div;
- spc2_ptr->ucPostDiv = post_div;
- spc2_ptr->ucPpll =
+ args.v2.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v2.usRefDiv = cpu_to_le16(ref_div);
+ args.v2.usFbDiv = cpu_to_le16(fb_div);
+ args.v2.ucFracFbDiv = frac_fb_div;
+ args.v2.ucPostDiv = post_div;
+ args.v2.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc2_ptr->ucCRTC = radeon_crtc->crtc_id;
- spc2_ptr->ucRefDivSrc = 1;
+ args.v2.ucCRTC = radeon_crtc->crtc_id;
+ args.v2.ucRefDivSrc = 1;
break;
case 3:
- if (!encoder)
- return;
- spc3_ptr =
- (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput;
- spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc3_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc3_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc3_ptr->ucFracFbDiv = frac_fb_div;
- spc3_ptr->ucPostDiv = post_div;
- spc3_ptr->ucPpll =
+ args.v3.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v3.usRefDiv = cpu_to_le16(ref_div);
+ args.v3.usFbDiv = cpu_to_le16(fb_div);
+ args.v3.ucFracFbDiv = frac_fb_div;
+ args.v3.ucPostDiv = post_div;
+ args.v3.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc3_ptr->ucMiscInfo = (radeon_crtc->crtc_id << 2);
- spc3_ptr->ucTransmitterId = radeon_encoder->encoder_id;
- spc3_ptr->ucEncoderMode =
+ args.v3.ucMiscInfo = (radeon_crtc->crtc_id << 2);
+ args.v3.ucTransmitterId = radeon_encoder->encoder_id;
+ args.v3.ucEncoderMode =
atombios_get_encoder_mode(encoder);
break;
default:
return;
}
- printk("executing set pll\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
-int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
+static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
return 0;
}
+int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (ASIC_IS_AVIVO(rdev))
+ return avivo_crtc_set_base(crtc, x, y, old_fb);
+ else
+ return radeon_crtc_set_base(crtc, x, y, old_fb);
+}
+
+/* properly set additional regs when using atombios */
+static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ u32 disp_merge_cntl;
+
+ switch (radeon_crtc->crtc_id) {
+ case 0:
+ disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
+ disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
+ WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
+ break;
+ case 1:
+ disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
+ disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
+ WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
+ WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
+ WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
+ break;
+ }
+}
+
int atombios_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
else {
if (radeon_crtc->crtc_id == 0)
atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
- radeon_crtc_set_base(crtc, x, y, old_fb);
- radeon_legacy_atom_set_surface(crtc);
+ atombios_crtc_set_base(crtc, x, y, old_fb);
+ radeon_legacy_atom_fixup(crtc);
}
atombios_overscan_setup(crtc, mode, adjusted_mode);
atombios_scaler_setup(crtc);
static void atombios_crtc_prepare(struct drm_crtc *crtc)
{
- atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
atombios_lock_crtc(crtc, 1);
+ atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void atombios_crtc_commit(struct drm_crtc *crtc)
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
+ track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 0));
track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
track->immd_dwords = pkt->count - 1;
r = r100_cs_track_check(p->rdev, track);
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ radeon_agp_disable(rdev);
} else {
rdev->mc.gtt_location = rdev->mc.agp_base;
}
case 5:
case 6:
case 7:
+ /* 1D/2D */
track->textures[i].tex_coord_type = 0;
break;
case 1:
- track->textures[i].tex_coord_type = 1;
+ /* CUBE */
+ track->textures[i].tex_coord_type = 2;
break;
case 2:
- track->textures[i].tex_coord_type = 2;
+ /* 3D */
+ track->textures[i].tex_coord_type = 1;
break;
}
break;
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ radeon_agp_disable(rdev);
} else {
rdev->mc.gtt_location = rdev->mc.agp_base;
}
fixed20_12 a;
u32 tmp;
int chansize, numchan;
- int r;
/* Get VRAM informations */
rdev->mc.vram_is_ddr = true;
rdev->mc.real_vram_size = rdev->mc.aper_size;
if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r)
- return r;
/* gtt_size is setup by radeon_agp_init */
rdev->mc.gtt_location = rdev->mc.agp_base;
tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
/* FIXME: we should wait for ring to be empty */
r600_cp_stop(rdev);
rdev->cp.ready = false;
+ r600_irq_suspend(rdev);
r600_wb_disable(rdev);
r600_pcie_gart_disable(rdev);
/* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0))
- return r;
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (!r) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ }
+ }
return 0;
}
r = radeon_fence_driver_init(rdev);
if (r)
return r;
+ if (rdev->flags & RADEON_IS_AGP) {
+ r = radeon_agp_init(rdev);
+ if (r)
+ radeon_agp_disable(rdev);
+ }
r = r600_mc_init(rdev);
if (r)
return r;
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failed testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
rb_bufsz = drm_order(ring_size / 4);
ring_size = (1 << rb_bufsz) * 4;
rdev->ih.ring_size = ring_size;
- rdev->ih.align_mask = 4 - 1;
+ rdev->ih.ptr_mask = rdev->ih.ring_size - 1;
+ rdev->ih.rptr = 0;
}
-static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size)
+static int r600_ih_ring_alloc(struct radeon_device *rdev)
{
int r;
- rdev->ih.ring_size = ring_size;
/* Allocate ring buffer */
if (rdev->ih.ring_obj == NULL) {
r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
return r;
}
}
- rdev->ih.ptr_mask = (rdev->cp.ring_size / 4) - 1;
- rdev->ih.rptr = 0;
-
return 0;
}
u32 interrupt_cntl, ih_cntl, ih_rb_cntl;
/* allocate ring */
- ret = r600_ih_ring_alloc(rdev, rdev->ih.ring_size);
+ ret = r600_ih_ring_alloc(rdev);
if (ret)
return ret;
return ret;
}
-void r600_irq_fini(struct radeon_device *rdev)
+void r600_irq_suspend(struct radeon_device *rdev)
{
r600_disable_interrupts(rdev);
r600_rlc_stop(rdev);
+}
+
+void r600_irq_fini(struct radeon_device *rdev)
+{
+ r600_irq_suspend(rdev);
r600_ih_ring_fini(rdev);
}
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled) {
+ r600_disable_interrupts(rdev);
+ /* force the active interrupt state to all disabled */
+ r600_disable_interrupt_state(rdev);
return 0;
+ }
if (ASIC_IS_DCE3(rdev)) {
hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
wptr = RREG32(IH_RB_WPTR);
if (wptr & RB_OVERFLOW) {
- WARN_ON(1);
- /* XXX deal with overflow */
- DRM_ERROR("IH RB overflow\n");
+ /* When a ring buffer overflow happen start parsing interrupt
+ * from the last not overwritten vector (wptr + 16). Hopefully
+ * this should allow us to catchup.
+ */
+ dev_warn(rdev->dev, "IH ring buffer overflow (0x%08X, %d, %d)\n",
+ wptr, rdev->ih.rptr, (wptr + 16) + rdev->ih.ptr_mask);
+ rdev->ih.rptr = (wptr + 16) & rdev->ih.ptr_mask;
tmp = RREG32(IH_RB_CNTL);
tmp |= IH_WPTR_OVERFLOW_CLEAR;
WREG32(IH_RB_CNTL, tmp);
}
- wptr = wptr & WPTR_OFFSET_MASK;
-
- return wptr;
+ return (wptr & rdev->ih.ptr_mask);
}
/* r600 IV Ring
u32 wptr = r600_get_ih_wptr(rdev);
u32 rptr = rdev->ih.rptr;
u32 src_id, src_data;
- u32 last_entry = rdev->ih.ring_size - 16;
u32 ring_index, disp_int, disp_int_cont, disp_int_cont2;
unsigned long flags;
bool queue_hotplug = false;
DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+ if (!rdev->ih.enabled)
+ return IRQ_NONE;
spin_lock_irqsave(&rdev->ih.lock, flags);
}
/* wptr/rptr are in bytes! */
- if (rptr == last_entry)
- rptr = 0;
- else
- rptr += 16;
+ rptr += 16;
+ rptr &= rdev->ih.ptr_mask;
}
/* make sure wptr hasn't changed while processing */
wptr = r600_get_ih_wptr(rdev);
{
int r;
+ if (rdev->r600_blit.shader_obj == NULL)
+ return;
+ /* If we can't reserve the bo, unref should be enough to destroy
+ * it when it becomes idle.
+ */
r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0)) {
- dev_err(rdev->dev, "(%d) can't finish r600 blit\n", r);
- goto out_unref;
+ if (!r) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
}
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
-out_unref:
radeon_bo_unref(&rdev->r600_blit.shader_obj);
}
typedef int (*next_reloc_t)(struct radeon_cs_parser*, struct radeon_cs_reloc**);
static next_reloc_t r600_cs_packet_next_reloc = &r600_cs_packet_next_reloc_mm;
+struct r600_cs_track {
+ u32 cb_color0_base_last;
+};
+
/**
* r600_cs_packet_parse() - parse cp packet and point ib index to next packet
* @parser: parser structure holding parsing context.
return 0;
}
+/**
+ * r600_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser: parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_packet p3reloc;
+ int r;
+
+ r = r600_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r) {
+ return 0;
+ }
+ if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+ return 0;
+ }
+ return 1;
+}
+
/**
* r600_cs_packet_next_vline() - parse userspace VLINE packet
* @parser: parser structure holding parsing context.
struct radeon_cs_packet *pkt)
{
struct radeon_cs_reloc *reloc;
+ struct r600_cs_track *track;
volatile u32 *ib;
unsigned idx;
unsigned i;
int r;
u32 idx_value;
+ track = (struct r600_cs_track *)p->track;
ib = p->ib->ptr;
idx = pkt->idx + 1;
idx_value = radeon_get_ib_value(p, idx);
for (i = 0; i < pkt->count; i++) {
reg = start_reg + (4 * i);
switch (reg) {
+ /* This register were added late, there is userspace
+ * which does provide relocation for those but set
+ * 0 offset. In order to avoid breaking old userspace
+ * we detect this and set address to point to last
+ * CB_COLOR0_BASE, note that if userspace doesn't set
+ * CB_COLOR0_BASE before this register we will report
+ * error. Old userspace always set CB_COLOR0_BASE
+ * before any of this.
+ */
+ case R_0280E0_CB_COLOR0_FRAG:
+ case R_0280E4_CB_COLOR1_FRAG:
+ case R_0280E8_CB_COLOR2_FRAG:
+ case R_0280EC_CB_COLOR3_FRAG:
+ case R_0280F0_CB_COLOR4_FRAG:
+ case R_0280F4_CB_COLOR5_FRAG:
+ case R_0280F8_CB_COLOR6_FRAG:
+ case R_0280FC_CB_COLOR7_FRAG:
+ case R_0280C0_CB_COLOR0_TILE:
+ case R_0280C4_CB_COLOR1_TILE:
+ case R_0280C8_CB_COLOR2_TILE:
+ case R_0280CC_CB_COLOR3_TILE:
+ case R_0280D0_CB_COLOR4_TILE:
+ case R_0280D4_CB_COLOR5_TILE:
+ case R_0280D8_CB_COLOR6_TILE:
+ case R_0280DC_CB_COLOR7_TILE:
+ if (!r600_cs_packet_next_is_pkt3_nop(p)) {
+ if (!track->cb_color0_base_last) {
+ dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] = track->cb_color0_base_last;
+ printk_once(KERN_WARNING "radeon: You have old & broken userspace "
+ "please consider updating mesa & xf86-video-ati\n");
+ } else {
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case DB_DEPTH_BASE:
case DB_HTILE_DATA_BASE:
case CB_COLOR0_BASE:
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color0_base_last = ib[idx+1+i];
+ break;
case CB_COLOR1_BASE:
case CB_COLOR2_BASE:
case CB_COLOR3_BASE:
int r600_cs_parse(struct radeon_cs_parser *p)
{
struct radeon_cs_packet pkt;
+ struct r600_cs_track *track;
int r;
+ track = kzalloc(sizeof(*track), GFP_KERNEL);
+ p->track = track;
do {
r = r600_cs_packet_parse(p, &pkt, p->idx);
if (r) {
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
+ parser.dev = &dev->pdev->dev;
parser.rdev = NULL;
parser.family = family;
parser.ib = &fake_ib;
#define S_000E60_SOFT_RESET_VMC(x) (((x) & 1) << 17)
#define R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
+
+#define R_0280E0_CB_COLOR0_FRAG 0x0280E0
+#define S_0280E0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280E0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280E0_BASE_256B 0x00000000
+#define R_0280E4_CB_COLOR1_FRAG 0x0280E4
+#define R_0280E8_CB_COLOR2_FRAG 0x0280E8
+#define R_0280EC_CB_COLOR3_FRAG 0x0280EC
+#define R_0280F0_CB_COLOR4_FRAG 0x0280F0
+#define R_0280F4_CB_COLOR5_FRAG 0x0280F4
+#define R_0280F8_CB_COLOR6_FRAG 0x0280F8
+#define R_0280FC_CB_COLOR7_FRAG 0x0280FC
+#define R_0280C0_CB_COLOR0_TILE 0x0280C0
+#define S_0280C0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280C0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280C0_BASE_256B 0x00000000
+#define R_0280C4_CB_COLOR1_TILE 0x0280C4
+#define R_0280C8_CB_COLOR2_TILE 0x0280C8
+#define R_0280CC_CB_COLOR3_TILE 0x0280CC
+#define R_0280D0_CB_COLOR4_TILE 0x0280D0
+#define R_0280D4_CB_COLOR5_TILE 0x0280D4
+#define R_0280D8_CB_COLOR6_TILE 0x0280D8
+#define R_0280DC_CB_COLOR7_TILE 0x0280DC
+
+
#endif
unsigned wptr_old;
unsigned ring_size;
uint64_t gpu_addr;
- uint32_t align_mask;
uint32_t ptr_mask;
spinlock_t lock;
bool enabled;
};
struct radeon_cs_parser {
+ struct device *dev;
struct radeon_device *rdev;
struct drm_file *filp;
/* chunks */
static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
{
- if (reg < 0x10000)
+ if (reg < rdev->rmmio_size)
return readl(((void __iomem *)rdev->rmmio) + reg);
else {
writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- if (reg < 0x10000)
+ if (reg < rdev->rmmio_size)
writel(v, ((void __iomem *)rdev->rmmio) + reg);
else {
writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
#define radeon_hpd_set_polarity(rdev, hpd) (rdev)->asic->hpd_set_polarity((rdev), (hpd))
/* Common functions */
+/* AGP */
+extern void radeon_agp_disable(struct radeon_device *rdev);
extern int radeon_gart_table_vram_pin(struct radeon_device *rdev);
extern int radeon_modeset_init(struct radeon_device *rdev);
extern void radeon_modeset_fini(struct radeon_device *rdev);
extern void r600_irq_fini(struct radeon_device *rdev);
extern void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size);
extern int r600_irq_set(struct radeon_device *rdev);
-
+extern void r600_irq_suspend(struct radeon_device *rdev);
+/* r600 audio */
extern int r600_audio_init(struct radeon_device *rdev);
extern int r600_audio_tmds_index(struct drm_encoder *encoder);
extern void r600_audio_set_clock(struct drm_encoder *encoder, int clock);
bool is_v3;
int ret;
+ if (rdev->ddev->agp->agp_info.aper_size < 32) {
+ dev_warn(rdev->dev, "AGP aperture to small (%dM) "
+ "need at least 32M, disabling AGP\n",
+ rdev->ddev->agp->agp_info.aper_size);
+ return -EINVAL;
+ }
+
/* Acquire AGP. */
if (!rdev->ddev->agp->acquired) {
ret = drm_agp_acquire(rdev->ddev);
else if (post_div == 3)
sclk >>= 2;
else if (post_div == 4)
- sclk >>= 4;
+ sclk >>= 3;
return sclk;
}
else if (post_div == 3)
mclk >>= 2;
else if (post_div == 4)
- mclk >>= 4;
+ mclk >>= 3;
return mclk;
}
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
parser.rdev = rdev;
+ parser.dev = rdev->dev;
r = radeon_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
rdev->asic->gart_set_page = &r100_pci_gart_set_page;
}
+ rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
}
void radeon_check_arguments(struct radeon_device *rdev)
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
- if (dig->dp_i2c_bus)
+ if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
+ dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus)
radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter);
}
if (!radeon_connector->ddc_bus)
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags)
+ uint32_t *post_div_p)
{
uint32_t min_ref_div = pll->min_ref_div;
uint32_t max_ref_div = pll->max_ref_div;
+ uint32_t min_post_div = pll->min_post_div;
+ uint32_t max_post_div = pll->max_post_div;
uint32_t min_fractional_feed_div = 0;
uint32_t max_fractional_feed_div = 0;
uint32_t best_vco = pll->best_vco;
DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
freq = freq * 1000;
- if (flags & RADEON_PLL_USE_REF_DIV)
+ if (pll->flags & RADEON_PLL_USE_REF_DIV)
min_ref_div = max_ref_div = pll->reference_div;
else {
while (min_ref_div < max_ref_div-1) {
}
}
- if (flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+ if (pll->flags & RADEON_PLL_USE_POST_DIV)
+ min_post_div = max_post_div = pll->post_div;
+
+ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
min_fractional_feed_div = pll->min_frac_feedback_div;
max_fractional_feed_div = pll->max_frac_feedback_div;
}
- for (post_div = pll->min_post_div; post_div <= pll->max_post_div; ++post_div) {
+ for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
uint32_t ref_div;
- if ((flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
+ if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
continue;
/* legacy radeons only have a few post_divs */
- if (flags & RADEON_PLL_LEGACY) {
+ if (pll->flags & RADEON_PLL_LEGACY) {
if ((post_div == 5) ||
(post_div == 7) ||
(post_div == 9) ||
tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
current_freq = radeon_div(tmp, ref_div * post_div);
- if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+ if (pll->flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
error = freq - current_freq;
error = error < 0 ? 0xffffffff : error;
} else
best_freq = current_freq;
best_error = error;
best_vco_diff = vco_diff;
- } else if (((flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
- ((flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
- ((flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
+ } else if (((pll->flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
best_post_div = post_div;
best_ref_div = ref_div;
best_feedback_div = feedback_div;
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags)
+ uint32_t *post_div_p)
{
fixed20_12 m, n, frac_n, p, f_vco, f_pclk, best_freq;
fixed20_12 pll_out_max, pll_out_min;
radeonfb_remove(dev, fb);
if (radeon_fb->obj) {
- radeon_gem_object_unpin(radeon_fb->obj);
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(radeon_fb->obj);
mutex_unlock(&dev->struct_mutex);
struct drm_gem_object *obj;
obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
-
+ if (obj == NULL) {
+ dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, "
+ "can't create framebuffer\n", mode_cmd->handle);
+ return NULL;
+ }
return radeon_framebuffer_create(dev, mode_cmd, obj);
}
}
}
-/* properly set crtc bpp when using atombios */
-void radeon_legacy_atom_set_surface(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- int format;
- uint32_t crtc_gen_cntl;
- uint32_t disp_merge_cntl;
- uint32_t crtc_pitch;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- format = 2;
- break;
- case 15: /* 555 */
- format = 3;
- break;
- case 16: /* 565 */
- format = 4;
- break;
- case 24: /* RGB */
- format = 5;
- break;
- case 32: /* xRGB */
- format = 6;
- break;
- default:
- return;
- }
-
- crtc_pitch = ((((crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8)) * crtc->fb->bits_per_pixel) +
- ((crtc->fb->bits_per_pixel * 8) - 1)) /
- (crtc->fb->bits_per_pixel * 8));
- crtc_pitch |= crtc_pitch << 16;
-
- WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch);
-
- switch (radeon_crtc->crtc_id) {
- case 0:
- disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
- disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
- WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
-
- crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL) & 0xfffff0ff;
- crtc_gen_cntl |= (format << 8);
- crtc_gen_cntl |= RADEON_CRTC_EXT_DISP_EN;
- WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
- break;
- case 1:
- disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
- disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
- WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
-
- crtc_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL) & 0xfffff0ff;
- crtc_gen_cntl |= (format << 8);
- WREG32(RADEON_CRTC2_GEN_CNTL, crtc_gen_cntl);
- WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
- WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
- break;
- }
-}
-
int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
uint32_t post_divider = 0;
uint32_t freq = 0;
uint8_t pll_gain;
- int pll_flags = RADEON_PLL_LEGACY;
bool use_bios_divs = false;
/* PLL registers */
uint32_t pll_ref_div = 0;
else
pll = &rdev->clock.p1pll;
+ pll->flags = RADEON_PLL_LEGACY;
+
if (mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
}
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
- pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
+ pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
if (!rdev->is_atom_bios) {
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
}
}
}
- pll_flags |= RADEON_PLL_USE_REF_DIV;
+ pll->flags |= RADEON_PLL_USE_REF_DIV;
}
}
}
if (!use_bios_divs) {
radeon_compute_pll(pll, mode->clock,
&freq, &feedback_div, &frac_fb_div,
- &reference_div, &post_divider,
- pll_flags);
+ &reference_div, &post_divider);
for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
if (post_div->divider == post_divider)
#define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
#define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10)
#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
+#define RADEON_PLL_USE_POST_DIV (1 << 12)
struct radeon_pll {
- uint16_t reference_freq;
- uint16_t reference_div;
+ /* reference frequency */
+ uint32_t reference_freq;
+
+ /* fixed dividers */
+ uint32_t reference_div;
+ uint32_t post_div;
+
+ /* pll in/out limits */
uint32_t pll_in_min;
uint32_t pll_in_max;
uint32_t pll_out_min;
uint32_t pll_out_max;
- uint16_t xclk;
+ uint32_t best_vco;
+ /* divider limits */
uint32_t min_ref_div;
uint32_t max_ref_div;
uint32_t min_post_div;
uint32_t max_feedback_div;
uint32_t min_frac_feedback_div;
uint32_t max_frac_feedback_div;
- uint32_t best_vco;
+
+ /* flags for the current clock */
+ uint32_t flags;
+
+ /* pll id */
+ uint32_t id;
};
struct radeon_i2c_chan {
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags);
+ uint32_t *post_div_p);
extern void radeon_compute_pll_avivo(struct radeon_pll *pll,
uint64_t freq,
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags);
+ uint32_t *post_div_p);
extern void radeon_setup_encoder_clones(struct drm_device *dev);
extern int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb);
-extern void radeon_legacy_atom_set_surface(struct drm_crtc *crtc);
extern int radeon_crtc_cursor_set(struct drm_crtc *crtc,
struct drm_file *file_priv,
int radeon_bo_evict_vram(struct radeon_device *rdev)
{
- if (rdev->flags & RADEON_IS_IGP) {
+ /* late 2.6.33 fix IGP hibernate - we need pm ops to do this correct */
+ if (0 && (rdev->flags & RADEON_IS_IGP)) {
if (rdev->mc.igp_sideport_enabled == false)
/* Useless to evict on IGP chips */
return 0;
0x22b8 SE_TCL_TEX_CYL_WRAP_CTL
0x22c0 SE_TCL_UCP_VERT_BLEND_CNTL
0x22c4 SE_TCL_POINT_SPRITE_CNTL
+0x22d0 SE_PVS_CNTL
+0x22d4 SE_PVS_CONST_CNTL
0x2648 RE_POINTSIZE
0x26c0 RE_TOP_LEFT
0x26c4 RE_MISC
fixed20_12 a;
u32 tmp;
int chansize, numchan;
- int r;
/* Get VRAM informations */
rdev->mc.vram_is_ddr = true;
rdev->mc.real_vram_size = rdev->mc.aper_size;
if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r)
- return r;
/* gtt_size is setup by radeon_agp_init */
rdev->mc.gtt_location = rdev->mc.agp_base;
tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
rdev->cp.ready = false;
+ r600_irq_suspend(rdev);
r600_wb_disable(rdev);
rv770_pcie_gart_disable(rdev);
/* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (likely(r == 0)) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (likely(r == 0)) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ }
}
return 0;
}
r = radeon_fence_driver_init(rdev);
if (r)
return r;
+ if (rdev->flags & RADEON_IS_AGP) {
+ r = radeon_agp_init(rdev);
+ if (r)
+ radeon_agp_disable(rdev);
+ }
r = rv770_mc_init(rdev);
if (r)
return r;
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failed testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
return 0;
bdev->man[bo->mem.mem_type].gpu_offset;
bo->cur_placement = bo->mem.placement;
spin_unlock(&bo->lock);
- }
+ } else
+ bo->offset = 0;
return 0;
static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
{
struct ttm_bo_global *glob = bdev->glob;
- struct ttm_buffer_object *entry, *nentry;
- struct list_head *list, *next;
- int ret;
+ struct ttm_buffer_object *entry = NULL;
+ int ret = 0;
spin_lock(&glob->lru_lock);
- list_for_each_safe(list, next, &bdev->ddestroy) {
- entry = list_entry(list, struct ttm_buffer_object, ddestroy);
- nentry = NULL;
+ if (list_empty(&bdev->ddestroy))
+ goto out_unlock;
- /*
- * Protect the next list entry from destruction while we
- * unlock the lru_lock.
- */
+ entry = list_first_entry(&bdev->ddestroy,
+ struct ttm_buffer_object, ddestroy);
+ kref_get(&entry->list_kref);
- if (next != &bdev->ddestroy) {
- nentry = list_entry(next, struct ttm_buffer_object,
- ddestroy);
+ for (;;) {
+ struct ttm_buffer_object *nentry = NULL;
+
+ if (entry->ddestroy.next != &bdev->ddestroy) {
+ nentry = list_first_entry(&entry->ddestroy,
+ struct ttm_buffer_object, ddestroy);
kref_get(&nentry->list_kref);
}
- kref_get(&entry->list_kref);
spin_unlock(&glob->lru_lock);
ret = ttm_bo_cleanup_refs(entry, remove_all);
kref_put(&entry->list_kref, ttm_bo_release_list);
+ entry = nentry;
+
+ if (ret || !entry)
+ goto out;
spin_lock(&glob->lru_lock);
- if (nentry) {
- bool next_onlist = !list_empty(next);
- spin_unlock(&glob->lru_lock);
- kref_put(&nentry->list_kref, ttm_bo_release_list);
- spin_lock(&glob->lru_lock);
- /*
- * Someone might have raced us and removed the
- * next entry from the list. We don't bother restarting
- * list traversal.
- */
-
- if (!next_onlist)
- break;
- }
- if (ret)
+ if (list_empty(&entry->ddestroy))
break;
}
- ret = !list_empty(&bdev->ddestroy);
- spin_unlock(&glob->lru_lock);
+out_unlock:
+ spin_unlock(&glob->lru_lock);
+out:
+ if (entry)
+ kref_put(&entry->list_kref, ttm_bo_release_list);
return ret;
}
ttm_flag_masked(&cur_flags, placement->busy_placement[i],
~TTM_PL_MASK_MEMTYPE);
+
+ if (mem_type == TTM_PL_SYSTEM) {
+ mem->mem_type = mem_type;
+ mem->placement = cur_flags;
+ mem->mm_node = NULL;
+ return 0;
+ }
+
ret = ttm_bo_mem_force_space(bo, mem_type, placement, mem,
interruptible, no_wait);
if (ret == 0 && mem->mm_node) {
* anyone tries to access a ttm page.
*/
+ if (bo->bdev->driver->swap_notify)
+ bo->bdev->driver->swap_notify(bo);
+
ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
out:
while (ttm_bo_swapout(&bdev->glob->shrink) == 0)
;
}
+EXPORT_SYMBOL(ttm_bo_swapout_all);
wake_up_all(&lock->queue);
spin_unlock(&lock->lock);
}
+EXPORT_SYMBOL(ttm_suspend_unlock);
static bool __ttm_suspend_lock(struct ttm_lock *lock)
{
{
wait_event(lock->queue, __ttm_suspend_lock(lock));
}
+EXPORT_SYMBOL(ttm_suspend_lock);
.busy_placement = &vram_placement_flags
};
+struct ttm_placement vmw_vram_sys_placement = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .num_placement = 1,
+ .placement = &vram_placement_flags,
+ .num_busy_placement = 1,
+ .busy_placement = &sys_placement_flags
+};
+
struct ttm_placement vmw_vram_ne_placement = {
.fpfn = 0,
.lpfn = 0,
return 0;
}
+static void vmw_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *new_mem)
+{
+ if (new_mem->mem_type != TTM_PL_SYSTEM)
+ vmw_dmabuf_gmr_unbind(bo);
+}
+
+static void vmw_swap_notify(struct ttm_buffer_object *bo)
+{
+ vmw_dmabuf_gmr_unbind(bo);
+}
+
/**
* FIXME: We're using the old vmware polling method to sync.
* Do this with fences instead.
.sync_obj_wait = vmw_sync_obj_wait,
.sync_obj_flush = vmw_sync_obj_flush,
.sync_obj_unref = vmw_sync_obj_unref,
- .sync_obj_ref = vmw_sync_obj_ref
+ .sync_obj_ref = vmw_sync_obj_ref,
+ .move_notify = vmw_move_notify,
+ .swap_notify = vmw_swap_notify
};
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+ void *ptr);
static void vmw_print_capabilities(uint32_t capabilities)
{
dev_priv->dev = dev;
dev_priv->vmw_chipset = chipset;
+ dev_priv->last_read_sequence = (uint32_t) -100;
mutex_init(&dev_priv->hw_mutex);
mutex_init(&dev_priv->cmdbuf_mutex);
rwlock_init(&dev_priv->resource_lock);
vmw_fb_init(dev_priv);
}
+ dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
+ register_pm_notifier(&dev_priv->pm_nb);
+
return 0;
out_no_device:
DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n");
+ unregister_pm_notifier(&dev_priv->pm_nb);
+
if (!dev_priv->stealth) {
vmw_fb_close(dev_priv);
vmw_kms_close(dev_priv);
drm_put_dev(dev);
}
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+ void *ptr)
+{
+ struct vmw_private *dev_priv =
+ container_of(nb, struct vmw_private, pm_nb);
+ struct vmw_master *vmaster = dev_priv->active_master;
+
+ switch (val) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ ttm_suspend_lock(&vmaster->lock);
+
+ /**
+ * This empties VRAM and unbinds all GMR bindings.
+ * Buffer contents is moved to swappable memory.
+ */
+ ttm_bo_swapout_all(&dev_priv->bdev);
+ break;
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ ttm_suspend_unlock(&vmaster->lock);
+ break;
+ case PM_RESTORE_PREPARE:
+ break;
+ case PM_POST_RESTORE:
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/**
+ * These might not be needed with the virtual SVGA device.
+ */
+
+int vmw_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+int vmw_pci_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ return pci_enable_device(pdev);
+}
+
static struct drm_driver driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
DRIVER_MODESET,
.name = VMWGFX_DRIVER_NAME,
.id_table = vmw_pci_id_list,
.probe = vmw_probe,
- .remove = vmw_remove
+ .remove = vmw_remove,
+ .suspend = vmw_pci_suspend,
+ .resume = vmw_pci_resume
},
.name = VMWGFX_DRIVER_NAME,
.desc = VMWGFX_DRIVER_DESC,
#include "drmP.h"
#include "vmwgfx_drm.h"
#include "drm_hashtab.h"
+#include "linux/suspend.h"
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_object.h"
#include "ttm/ttm_lock.h"
struct vmw_master *active_master;
struct vmw_master fbdev_master;
+ struct notifier_block pm_nb;
};
static inline struct vmw_private *vmw_priv(struct drm_device *dev)
struct vmw_dma_buffer *bo);
extern int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv,
struct vmw_dma_buffer *bo);
+extern void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo);
extern int vmw_stream_claim_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int vmw_stream_unref_ioctl(struct drm_device *dev, void *data,
extern struct ttm_placement vmw_vram_placement;
extern struct ttm_placement vmw_vram_ne_placement;
+extern struct ttm_placement vmw_vram_sys_placement;
extern struct ttm_placement vmw_sys_placement;
extern struct ttm_bo_driver vmw_bo_driver;
extern int vmw_dma_quiescent(struct drm_device *dev);
{
int ret;
+ if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
+ return 0;
+
+ /**
+ * Put BO in VRAM, only if there is space.
+ */
+
+ ret = ttm_bo_validate(bo, &vmw_vram_sys_placement, true, false);
+ if (unlikely(ret == -ERESTARTSYS))
+ return ret;
+
+ /**
+ * Otherwise, set it up as GMR.
+ */
+
if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
return 0;
if (likely(ret == 0 || ret == -ERESTARTSYS))
return ret;
+ /**
+ * If that failed, try VRAM again, this time evicting
+ * previous contents.
+ */
ret = ttm_bo_validate(bo, &vmw_vram_placement, true, false);
return ret;
if (unlikely(ret != 0))
goto err_unlock;
- if (vmw_bo->gmr_bound) {
- vmw_gmr_unbind(vmw_priv, vmw_bo->gmr_id);
- spin_lock(&bo->glob->lru_lock);
- ida_remove(&vmw_priv->gmr_ida, vmw_bo->gmr_id);
- spin_unlock(&bo->glob->lru_lock);
- vmw_bo->gmr_bound = NULL;
- }
-
ret = ttm_bo_validate(bo, &ne_placement, false, false);
ttm_bo_unreserve(bo);
err_unlock:
(unsigned int) min,
(unsigned int) fifo->capabilities);
- dev_priv->fence_seq = (uint32_t) -100;
- dev_priv->last_read_sequence = (uint32_t) -100;
+ dev_priv->fence_seq = dev_priv->last_read_sequence;
iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
return vmw_fifo_send_fence(dev_priv, &dummy);
} *cmd;
int i, increment = 1;
- if (!num_clips ||
- !(dev_priv->fifo.capabilities &
- SVGA_FIFO_CAP_SCREEN_OBJECT)) {
+ if (!num_clips) {
num_clips = 1;
clips = &norect;
norect.x1 = norect.y1 = 0;
for (i = 0; i < num_clips; i++, clips += increment) {
cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE);
- cmd[i].body.x = cpu_to_le32(clips[i].x1);
- cmd[i].body.y = cpu_to_le32(clips[i].y1);
- cmd[i].body.width = cpu_to_le32(clips[i].x2 - clips[i].x1);
- cmd[i].body.height = cpu_to_le32(clips[i].y2 - clips[i].y1);
+ cmd[i].body.x = cpu_to_le32(clips->x1);
+ cmd[i].body.y = cpu_to_le32(clips->y1);
+ cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1);
+ cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1);
}
vmw_fifo_commit(dev_priv, sizeof(*cmd) * num_clips);
bool pin, bool interruptible)
{
struct ttm_buffer_object *bo = &buf->base;
- struct ttm_bo_global *glob = bo->glob;
struct ttm_placement *overlay_placement = &vmw_vram_placement;
int ret;
if (unlikely(ret != 0))
goto err;
- if (buf->gmr_bound) {
- vmw_gmr_unbind(dev_priv, buf->gmr_id);
- spin_lock(&glob->lru_lock);
- ida_remove(&dev_priv->gmr_ida, buf->gmr_id);
- spin_unlock(&glob->lru_lock);
- buf->gmr_bound = NULL;
- }
-
if (pin)
overlay_placement = &vmw_vram_ne_placement;
if (unlikely(ret != 0))
goto out_err1;
+
+ if (srf->flags & (1 << 9) &&
+ srf->num_sizes == 1 &&
+ srf->sizes[0].width == 64 &&
+ srf->sizes[0].height == 64 &&
+ srf->format == SVGA3D_A8R8G8B8) {
+
+ srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
+ /* clear the image */
+ if (srf->snooper.image) {
+ memset(srf->snooper.image, 0x00, 64 * 64 * 4);
+ } else {
+ DRM_ERROR("Failed to allocate cursor_image\n");
+ ret = -ENOMEM;
+ goto out_err1;
+ }
+ } else {
+ srf->snooper.image = NULL;
+ }
+ srf->snooper.crtc = NULL;
+
user_srf->base.shareable = false;
user_srf->base.tfile = NULL;
return ret;
}
- if (srf->flags & (1 << 9) &&
- srf->num_sizes == 1 &&
- srf->sizes[0].width == 64 &&
- srf->sizes[0].height == 64 &&
- srf->format == SVGA3D_A8R8G8B8) {
-
- srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
- /* clear the image */
- if (srf->snooper.image)
- memset(srf->snooper.image, 0x00, 64 * 64 * 4);
- else
- DRM_ERROR("Failed to allocate cursor_image\n");
-
- } else {
- srf->snooper.image = NULL;
- }
- srf->snooper.crtc = NULL;
-
rep->sid = user_srf->base.hash.key;
if (rep->sid == SVGA3D_INVALID_ID)
DRM_ERROR("Created bad Surface ID.\n");
return bo_user_size + page_array_size;
}
-void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo)
{
struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
struct ttm_bo_global *glob = bo->glob;
struct vmw_private *dev_priv =
container_of(bo->bdev, struct vmw_private, bdev);
- ttm_mem_global_free(glob->mem_glob, bo->acc_size);
if (vmw_bo->gmr_bound) {
vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
spin_lock(&glob->lru_lock);
ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
spin_unlock(&glob->lru_lock);
+ vmw_bo->gmr_bound = false;
}
+}
+
+void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+{
+ struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
+ struct ttm_bo_global *glob = bo->glob;
+
+ vmw_dmabuf_gmr_unbind(bo);
+ ttm_mem_global_free(glob->mem_glob, bo->acc_size);
kfree(vmw_bo);
}
static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo)
{
struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo);
- struct vmw_dma_buffer *vmw_bo = &vmw_user_bo->dma;
struct ttm_bo_global *glob = bo->glob;
- struct vmw_private *dev_priv =
- container_of(bo->bdev, struct vmw_private, bdev);
+ vmw_dmabuf_gmr_unbind(bo);
ttm_mem_global_free(glob->mem_glob, bo->acc_size);
- if (vmw_bo->gmr_bound) {
- vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
- spin_lock(&glob->lru_lock);
- ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
- spin_unlock(&glob->lru_lock);
- }
kfree(vmw_user_bo);
}
}
ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, req->size,
- &vmw_vram_placement, true,
+ &vmw_vram_sys_placement, true,
&vmw_user_dmabuf_destroy);
if (unlikely(ret != 0))
return ret;
data->fan1_div = 4;
break;
default:
- mutex_unlock(&data->update_lock);
count = -EINVAL;
goto EXIT;
}
&buf, ACPI_TYPE_PACKAGE);
if (ret != AE_OK) {
dev_dbg(&device->dev, "atk: method MBIF not found\n");
- err = -ENODEV;
- goto out;
- }
-
- obj = buf.pointer;
- if (obj->package.count >= 2 &&
- obj->package.elements[1].type == ACPI_TYPE_STRING) {
- dev_dbg(&device->dev, "board ID = %s\n",
- obj->package.elements[1].string.pointer);
+ } else {
+ obj = buf.pointer;
+ if (obj->package.count >= 2) {
+ union acpi_object *id = &obj->package.elements[1];
+ if (id->type == ACPI_TYPE_STRING)
+ dev_dbg(&device->dev, "board ID = %s\n",
+ id->string.pointer);
+ }
+ ACPI_FREE(buf.pointer);
}
- ACPI_FREE(buf.pointer);
err = atk_probe_if(data);
if (err) {
static int watchdog_open(struct inode *inode, struct file *filp)
{
struct fschmd_data *pos, *data = NULL;
+ int watchdog_is_open;
/* We get called from drivers/char/misc.c with misc_mtx hold, and we
call misc_register() from fschmd_probe() with watchdog_data_mutex
}
}
/* Note we can never not have found data, so we don't check for this */
- kref_get(&data->kref);
+ watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+ if (!watchdog_is_open)
+ kref_get(&data->kref);
mutex_unlock(&watchdog_data_mutex);
- if (test_and_set_bit(0, &data->watchdog_is_open))
+ if (watchdog_is_open)
return -EBUSY;
/* Start the watchdog */
}
/* Restore device to its initial state */
-static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
+static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
{
if ((sio_data->activate & 0x01) == 0) {
superio_enter();
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
- i2c_imx->stopped = 1;
}
if (cpu_is_mx1()) {
/*
udelay(i2c_imx->disable_delay);
}
- if (!i2c_imx->stopped)
+ if (!i2c_imx->stopped) {
i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ }
/* Disable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
}
res_size = resource_size(res);
+
+ if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
+ ret = -EBUSY;
+ goto fail0;
+ }
+
base = ioremap(res->start, res_size);
if (!base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -EIO;
- goto fail0;
+ goto fail1;
}
i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
if (!i2c_imx) {
dev_err(&pdev->dev, "can't allocate interface\n");
ret = -ENOMEM;
- goto fail1;
- }
-
- if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
goto fail2;
}
fail4:
clk_put(i2c_imx->clk);
fail3:
- release_mem_region(i2c_imx->res->start, resource_size(res));
-fail2:
kfree(i2c_imx);
-fail1:
+fail2:
iounmap(base);
+fail1:
+ release_mem_region(res->start, resource_size(res));
fail0:
if (pdata && pdata->exit)
pdata->exit(&pdev->dev);
clk_put(i2c_imx->clk);
- release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
iounmap(i2c_imx->base);
+ release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
kfree(i2c_imx);
return 0;
}
list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
spin_unlock_irqrestore(&ipath_devs_lock, flags);
ret = create_device_files(sb, dd);
- if (ret) {
- deactivate_locked_super(sb);
+ if (ret)
goto bail;
- }
spin_lock_irqsave(&ipath_devs_lock, flags);
}
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
ABS_MT_TRACKING_ID,
+ ABS_MT_PRESSURE,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
return;
}
- dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
+ dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
"toggle %u mode %u scan 0x%08X\n",
address,
command,
DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
},
},
+ {
+ /* LifeBook B */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"),
+ },
+ },
{
/* LifeBook B */
.matches = {
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <linux/spi/ad7879.h>
struct input_dev *input;
struct work_struct work;
struct timer_list timer;
-
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gc;
+#endif
struct mutex mutex;
unsigned disabled:1; /* P: mutex */
u8 median;
u16 x_plate_ohms;
u16 pressure_max;
- u16 gpio_init;
u16 cmd_crtl1;
u16 cmd_crtl2;
u16 cmd_crtl3;
- unsigned gpio:1;
};
static int ad7879_read(bus_device *, u8);
static void ad7879_setup(struct ad7879 *ts)
{
- ts->cmd_crtl3 = AD7879_YPLUS_BIT |
- AD7879_XPLUS_BIT |
- AD7879_Z2_BIT |
- AD7879_Z1_BIT |
- AD7879_TEMPMASK_BIT |
- AD7879_AUXVBATMASK_BIT |
- AD7879_GPIOALERTMASK_BIT;
-
- ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
- AD7879_AVG(ts->averaging) |
- AD7879_MFS(ts->median) |
- AD7879_FCD(ts->first_conversion_delay) |
- ts->gpio_init;
-
- ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
- AD7879_ACQ(ts->acquisition_time) |
- AD7879_TMR(ts->pen_down_acc_interval);
-
ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
-static ssize_t ad7879_gpio_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static struct attribute *ad7879_attributes[] = {
+ &dev_attr_disable.attr,
+ NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+ .attrs = ad7879_attributes,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int ad7879_gpio_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
{
- struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ int err;
- return sprintf(buf, "%u\n", ts->gpio);
+ mutex_lock(&ts->mutex);
+ ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
+ err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+
+ return err;
}
-static ssize_t ad7879_gpio_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int ad7879_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int level)
{
- struct ad7879 *ts = dev_get_drvdata(dev);
- unsigned long val;
- int error;
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ int err;
- error = strict_strtoul(buf, 10, &val);
- if (error)
- return error;
+ mutex_lock(&ts->mutex);
+ ts->cmd_crtl2 &= ~AD7879_GPIODIR;
+ ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
+ if (level)
+ ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+ else
+ ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+ err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+
+ return err;
+}
+
+static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ u16 val;
mutex_lock(&ts->mutex);
- ts->gpio = !!val;
- error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
- ts->gpio ?
- ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
- ts->cmd_crtl2 | AD7879_GPIO_DATA);
+ val = ad7879_read(ts->bus, AD7879_REG_CTRL2);
mutex_unlock(&ts->mutex);
- return error ? : count;
+ return !!(val & AD7879_GPIO_DATA);
}
-static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
+static void ad7879_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
-static struct attribute *ad7879_attributes[] = {
- &dev_attr_disable.attr,
- &dev_attr_gpio.attr,
- NULL
-};
+ mutex_lock(&ts->mutex);
+ if (value)
+ ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+ else
+ ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
-static const struct attribute_group ad7879_attr_group = {
- .attrs = ad7879_attributes,
-};
+ ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+}
+
+static int __devinit ad7879_gpio_add(struct device *dev)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879_platform_data *pdata = dev->platform_data;
+ int ret = 0;
+
+ if (pdata->gpio_export) {
+ ts->gc.direction_input = ad7879_gpio_direction_input;
+ ts->gc.direction_output = ad7879_gpio_direction_output;
+ ts->gc.get = ad7879_gpio_get_value;
+ ts->gc.set = ad7879_gpio_set_value;
+ ts->gc.can_sleep = 1;
+ ts->gc.base = pdata->gpio_base;
+ ts->gc.ngpio = 1;
+ ts->gc.label = "AD7879-GPIO";
+ ts->gc.owner = THIS_MODULE;
+ ts->gc.dev = dev;
+
+ ret = gpiochip_add(&ts->gc);
+ if (ret)
+ dev_err(dev, "failed to register gpio %d\n",
+ ts->gc.base);
+ }
+
+ return ret;
+}
+
+/*
+ * We mark ad7879_gpio_remove inline so there is a chance the code
+ * gets discarded when not needed. We can't do __devinit/__devexit
+ * markup since it is used in both probe and remove methods.
+ */
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879_platform_data *pdata = dev->platform_data;
+ int ret;
+
+ if (pdata->gpio_export) {
+ ret = gpiochip_remove(&ts->gc);
+ if (ret)
+ dev_err(dev, "failed to remove gpio %d\n",
+ ts->gc.base);
+ }
+}
+#else
+static inline int ad7879_gpio_add(struct device *dev)
+{
+ return 0;
+}
+
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+}
+#endif
static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
{
ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
ts->median = pdata->median;
- if (pdata->gpio_output)
- ts->gpio_init = AD7879_GPIO_EN |
- (pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
- else
- ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
-
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
input_dev->name = "AD7879 Touchscreen";
goto err_free_mem;
}
+ ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+ AD7879_XPLUS_BIT |
+ AD7879_Z2_BIT |
+ AD7879_Z1_BIT |
+ AD7879_TEMPMASK_BIT |
+ AD7879_AUXVBATMASK_BIT |
+ AD7879_GPIOALERTMASK_BIT;
+
+ ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+ AD7879_AVG(ts->averaging) |
+ AD7879_MFS(ts->median) |
+ AD7879_FCD(ts->first_conversion_delay);
+
+ ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+ AD7879_ACQ(ts->acquisition_time) |
+ AD7879_TMR(ts->pen_down_acc_interval);
+
ad7879_setup(ts);
err = request_irq(bus->irq, ad7879_irq,
if (err)
goto err_free_irq;
- err = input_register_device(input_dev);
+ err = ad7879_gpio_add(&bus->dev);
if (err)
goto err_remove_attr;
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_gpio;
+
dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
revid >> 8, bus->irq);
return 0;
+err_remove_gpio:
+ ad7879_gpio_remove(&bus->dev);
err_remove_attr:
sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
err_free_irq:
static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
{
+ ad7879_gpio_remove(&bus->dev);
ad7879_disable(ts);
sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
free_irq(ts->bus->irq, ts);
return 0;
}
- if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
- DMWARN("%s: target device %s is misaligned: "
+ if (bdev_stack_limits(limits, bdev, start) < 0)
+ DMWARN("%s: adding target device %s caused an alignment inconsistency: "
"physical_block_size=%u, logical_block_size=%u, "
"alignment_offset=%u, start=%llu",
dm_device_name(ti->table->md), bdevname(bdev, b),
q->limits.physical_block_size,
q->limits.logical_block_size,
q->limits.alignment_offset,
- (unsigned long long) start << 9);
-
+ (unsigned long long) start << SECTOR_SHIFT);
/*
* Check if merge fn is supported.
* for the table.
*/
if (blk_stack_limits(limits, &ti_limits, 0) < 0)
- DMWARN("%s: target device "
+ DMWARN("%s: adding target device "
"(start sect %llu len %llu) "
- "is misaligned",
+ "caused an alignment inconsistency",
dm_device_name(table->md),
(unsigned long long) ti->begin,
(unsigned long long) ti->len);
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
- /*
- * Each target device in the table has a data area that should normally
- * be aligned such that the DM device's alignment_offset is 0.
- * FIXME: Propagate alignment_offsets up the stack and warn of
- * sub-optimal or inconsistent settings.
- */
- limits->alignment_offset = 0;
- limits->misaligned = 0;
-
/*
* Copy table's limits to the DM device's request_queue
*/
if (ioc->bus_type == SPI)
num_chain *= MPT_SCSI_CAN_QUEUE;
+ else if (ioc->bus_type == SAS)
+ num_chain *= MPT_SAS_CAN_QUEUE;
else
num_chain *= MPT_FC_CAN_QUEUE;
#
obj-$(CONFIG_MFD_SM501) += sm501.o
-obj-$(CONFIG_MFD_ASIC3) += asic3.o
+obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
To build this as a module select M here, the module will be called
vmu-flash.
+config MTD_PISMO
+ tristate "MTD discovery driver for PISMO modules"
+ depends on I2C
+ depends on ARCH_VERSATILE
+ help
+ This driver allows for discovery of PISMO modules - see
+ <http://www.pismoworld.org/>. These are small modules containing
+ up to five memory devices (eg, SRAM, flash, DOC) described by an
+ I2C EEPROM.
+
+ This driver does not create any MTD maps itself; instead it
+ creates MTD physmap and MTD SRAM platform devices. If you
+ enable this option, you should consider enabling MTD_PHYSMAP
+ and/or MTD_PLATRAM according to the devices on your module.
+
+ When built as a module, it will be called pismo.ko
+
endmenu
--- /dev/null
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * For ARM Realview and Versatile platforms
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/pismo.h>
+
+#define PISMO_NUM_CS 5
+
+struct pismo_cs_block {
+ u8 type;
+ u8 width;
+ __le16 access;
+ __le32 size;
+ u32 reserved[2];
+ char device[32];
+} __packed;
+
+struct pismo_eeprom {
+ struct pismo_cs_block cs[PISMO_NUM_CS];
+ char board[15];
+ u8 sum;
+} __packed;
+
+struct pismo_mem {
+ phys_addr_t base;
+ u32 size;
+ u16 access;
+ u8 width;
+ u8 type;
+};
+
+struct pismo_data {
+ struct i2c_client *client;
+ void (*vpp)(void *, int);
+ void *vpp_data;
+ struct platform_device *dev[PISMO_NUM_CS];
+};
+
+/* FIXME: set_vpp could do with a better calling convention */
+static struct pismo_data *vpp_pismo;
+static DEFINE_MUTEX(pismo_mutex);
+
+static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+{
+ mutex_lock(&pismo_mutex);
+ if (vpp_pismo) {
+ mutex_unlock(&pismo_mutex);
+ kfree(pismo);
+ return -EBUSY;
+ }
+ vpp_pismo = pismo;
+ mutex_unlock(&pismo_mutex);
+ return 0;
+}
+
+static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
+{
+ mutex_lock(&pismo_mutex);
+ if (vpp_pismo == pismo)
+ vpp_pismo = NULL;
+ mutex_unlock(&pismo_mutex);
+}
+
+static void pismo_set_vpp(struct map_info *map, int on)
+{
+ struct pismo_data *pismo = vpp_pismo;
+
+ pismo->vpp(pismo->vpp_data, on);
+}
+/* end of hack */
+
+
+static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
+{
+ width &= 15;
+ if (width > 2)
+ return 0;
+ return 1 << width;
+}
+
+static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
+ u8 addr, size_t size)
+{
+ int ret;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .len = sizeof(addr),
+ .buf = &addr,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = size,
+ .buf = buf,
+ },
+ };
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+
+ return ret == ARRAY_SIZE(msg) ? size : -EIO;
+}
+
+static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
+ struct pismo_mem *region, const char *name, void *pdata, size_t psize)
+{
+ struct platform_device *dev;
+ struct resource res = { };
+ phys_addr_t base = region.base;
+ int ret;
+
+ if (base == ~0)
+ return -ENXIO;
+
+ res.start = base;
+ res.end = base + region->size - 1;
+ res.flags = IORESOURCE_MEM;
+
+ dev = platform_device_alloc(name, i);
+ if (!dev)
+ return -ENOMEM;
+ dev->dev.parent = &pismo->client->dev;
+
+ do {
+ ret = platform_device_add_resources(dev, &res, 1);
+ if (ret)
+ break;
+
+ ret = platform_device_add_data(dev, pdata, psize);
+ if (ret)
+ break;
+
+ ret = platform_device_add(dev);
+ if (ret)
+ break;
+
+ pismo->dev[i] = dev;
+ return 0;
+ } while (0);
+
+ platform_device_put(dev);
+ return ret;
+}
+
+static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
+ struct pismo_mem *region)
+{
+ struct physmap_flash_data data = {
+ .width = region->width,
+ };
+
+ if (pismo->vpp)
+ data.set_vpp = pismo_set_vpp;
+
+ return pismo_add_device(pismo, i, region, "physmap-flash",
+ &data, sizeof(data));
+}
+
+static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
+ struct pismo_mem *region)
+{
+ struct platdata_mtd_ram data = {
+ .bankwidth = region->width,
+ };
+
+ return pismo_add_device(pismo, i, region, "mtd-ram",
+ &data, sizeof(data));
+}
+
+static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
+ const struct pismo_cs_block *cs, phys_addr_t base)
+{
+ struct device *dev = &pismo->client->dev;
+ struct pismo_mem region;
+
+ region.base = base;
+ region.type = cs->type;
+ region.width = pismo_width_to_bytes(cs->width);
+ region.access = le16_to_cpu(cs->access);
+ region.size = le32_to_cpu(cs->size);
+
+ if (region.width == 0) {
+ dev_err(dev, "cs%u: bad width: %02x, ignoring\n", i, cs->width);
+ return;
+ }
+
+ /*
+ * FIXME: may need to the platforms memory controller here, but at
+ * the moment we assume that it has already been correctly setup.
+ * The memory controller can also tell us the base address as well.
+ */
+
+ dev_info(dev, "cs%u: %.32s: type %02x access %u00ps size %uK\n",
+ i, cs->device, region.type, region.access, region.size / 1024);
+
+ switch (region.type) {
+ case 0:
+ break;
+ case 1:
+ /* static DOC */
+ break;
+ case 2:
+ /* static NOR */
+ pismo_add_nor(pismo, i, ®ion);
+ break;
+ case 3:
+ /* static RAM */
+ pismo_add_sram(pismo, i, ®ion);
+ break;
+ }
+}
+
+static int __devexit pismo_remove(struct i2c_client *client)
+{
+ struct pismo_data *pismo = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
+ platform_device_unregister(pismo->dev[i]);
+
+ /* FIXME: set_vpp needs saner arguments */
+ pismo_setvpp_remove_fix(pismo);
+
+ kfree(pismo);
+
+ return 0;
+}
+
+static int __devinit pismo_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct pismo_pdata *pdata = client->dev.platform_data;
+ struct pismo_eeprom eeprom;
+ struct pismo_data *pismo;
+ int ret, i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "functionality mismatch\n");
+ return -EIO;
+ }
+
+ pismo = kzalloc(sizeof(*pismo), GFP_KERNEL);
+ if (!pismo)
+ return -ENOMEM;
+
+ /* FIXME: set_vpp needs saner arguments */
+ ret = pismo_setvpp_probe_fix(pismo);
+ if (ret)
+ return ret;
+
+ pismo->client = client;
+ if (pdata) {
+ pismo->vpp = pdata->set_vpp;
+ pismo->vpp_data = pdata->vpp_data;
+ }
+ i2c_set_clientdata(client, pismo);
+
+ ret = pismo_eeprom_read(client, &eeprom, 0, sizeof(eeprom));
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading EEPROM: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(&client->dev, "%.15s board found\n", eeprom.board);
+
+ for (i = 0; i < ARRAY_SIZE(eeprom.cs); i++)
+ if (eeprom.cs[i].type != 0xff)
+ pismo_add_one(pismo, i, &eeprom.cs[i],
+ pdata->cs_addrs[i]);
+
+ return 0;
+}
+
+static const struct i2c_device_id pismo_id[] = {
+ { "pismo" },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, pismo_id);
+
+static struct i2c_driver pismo_driver = {
+ .driver = {
+ .name = "pismo",
+ .owner = THIS_MODULE,
+ },
+ .probe = pismo_probe,
+ .remove = __devexit_p(pismo_remove),
+ .id_table = pismo_id,
+};
+
+static int __init pismo_init(void)
+{
+ BUILD_BUG_ON(sizeof(struct pismo_cs_block) != 48);
+ BUILD_BUG_ON(sizeof(struct pismo_eeprom) != 256);
+
+ return i2c_add_driver(&pismo_driver);
+}
+module_init(pismo_init);
+
+static void __exit pismo_exit(void)
+{
+ i2c_del_driver(&pismo_driver);
+}
+module_exit(pismo_exit);
+
+MODULE_AUTHOR("Russell King <linux@arm.linux.org.uk>");
+MODULE_DESCRIPTION("PISMO memory driver");
+MODULE_LICENSE("GPL");
memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
/* Panics must be written immediately */
- if (reason == KMSG_DUMP_PANIC) {
+ if (reason != KMSG_DUMP_OOPS) {
if (!cxt->mtd->panic_write)
printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
else
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ return 0;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ goto out;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
cond_resched();
}
printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+out:
goodebcnt = ebcnt - bad;
return 0;
}
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ return 0;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
break;
}
- req.name[req.name_len] = '\0';
err = verify_mkvol_req(ubi, &req);
if (err)
break;
*/
struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
{
- int error, ubi_num, vol_id;
- struct ubi_volume_desc *ret;
+ int error, ubi_num, vol_id, mod;
struct inode *inode;
struct path path;
return ERR_PTR(error);
inode = path.dentry->d_inode;
+ mod = inode->i_mode;
ubi_num = ubi_major2num(imajor(inode));
vol_id = iminor(inode) - 1;
+ path_put(&path);
+ if (!S_ISCHR(mod))
+ return ERR_PTR(-EINVAL);
if (vol_id >= 0 && ubi_num >= 0)
- ret = ubi_open_volume(ubi_num, vol_id, mode);
- else
- ret = ERR_PTR(-ENODEV);
-
- path_put(&path);
- return ret;
+ return ubi_open_volume(ubi_num, vol_id, mode);
+ return ERR_PTR(-ENODEV);
}
EXPORT_SYMBOL_GPL(ubi_open_volume_path);
if (err)
return err;
vol->updating = 0;
+ return 0;
}
vol->upd_buf = vmalloc(ubi->leb_size);
vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
vol->alignment = be32_to_cpu(vtbl[i].alignment);
vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+ vol->upd_marker = vtbl[i].upd_marker;
vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
vol->name_len = be16_to_cpu(vtbl[i].name_len);
MCC_WRB_SGE_CNT_SHIFT;
wrb->payload_length = payload_len;
wrb->tag0 = opcode;
- be_dws_cpu_to_le(wrb, 20);
+ be_dws_cpu_to_le(wrb, 8);
}
/* Don't touch the hdr after it's prepared */
static void be_post_rx_frags(struct be_adapter *adapter)
{
struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
- struct be_rx_page_info *page_info = NULL;
+ struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
struct be_queue_info *rxq = &adapter->rx_obj.q;
struct page *pagep = NULL;
struct be_eth_rx_d *rxd;
rxd = queue_head_node(rxq);
rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
- queue_head_inc(rxq);
/* Any space left in the current big page for another frag? */
if ((page_offset + rx_frag_size + rx_frag_size) >
pagep = NULL;
page_info->last_page_user = true;
}
+
+ prev_page_info = page_info;
+ queue_head_inc(rxq);
page_info = &page_info_tbl[rxq->head];
}
if (pagep)
- page_info->last_page_user = true;
+ prev_page_info->last_page_user = true;
if (posted) {
atomic_add(posted, &rxq->used);
#include <asm/dma.h>
#include <linux/dma-mapping.h>
+#include <asm/dpmc.h>
#include <asm/blackfin.h>
#include <asm/cacheflush.h>
#include <asm/portmux.h>
u32 sclk, mdc_div;
/* Enable PHY output early */
- if (!(bfin_read_VR_CTL() & PHYCLKOE))
- bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
+ if (!(bfin_read_VR_CTL() & CLKBUFOE))
+ bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
sclk = get_sclk();
mdc_div = ((sclk / MDC_CLK) / 2) - 1;
/* for ioport free */
int bars;
int need_ioport;
+
+ bool discarding;
};
enum e1000_state_t {
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_256:
- rctl |= E1000_RCTL_SZ_256;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_512:
- rctl |= E1000_RCTL_SZ_512;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_1024:
- rctl |= E1000_RCTL_SZ_1024;
- rctl &= ~E1000_RCTL_BSEX;
- break;
case E1000_RXBUFFER_2048:
default:
rctl |= E1000_RCTL_SZ_2048;
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
}
* however with the new *_jumbo_rx* routines, jumbo receives will use
* fragmented skbs */
- if (max_frame <= E1000_RXBUFFER_256)
- adapter->rx_buffer_len = E1000_RXBUFFER_256;
- else if (max_frame <= E1000_RXBUFFER_512)
- adapter->rx_buffer_len = E1000_RXBUFFER_512;
- else if (max_frame <= E1000_RXBUFFER_1024)
- adapter->rx_buffer_len = E1000_RXBUFFER_1024;
- else if (max_frame <= E1000_RXBUFFER_2048)
+ if (max_frame <= E1000_RXBUFFER_2048)
adapter->rx_buffer_len = E1000_RXBUFFER_2048;
else
#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
length = le16_to_cpu(rx_desc->length);
/* !EOP means multiple descriptors were used to store a single
- * packet, also make sure the frame isn't just CRC only */
- if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+ * packet, if thats the case we need to toss it. In fact, we
+ * to toss every packet with the EOP bit clear and the next
+ * frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->discarding = true;
+
+ if (adapter->discarding) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
/* recycle */
buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->discarding = false;
goto next_desc;
}
/* CRC Stripping defines */
#define FLAG2_CRC_STRIPPING (1 << 0)
#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
+#define FLAG2_IS_DISCARDING (1 << 2)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
length = le16_to_cpu(rx_desc->length);
- /* !EOP means multiple descriptors were used to store a single
- * packet, also make sure the frame isn't just CRC only */
- if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
+ /*
+ * !EOP means multiple descriptors were used to store a single
+ * packet, if that's the case we need to toss it. In fact, we
+ * need to toss every packet with the EOP bit clear and the
+ * next frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
/* All receives must fit into a single buffer */
e_dbg("Receive packet consumed multiple buffers\n");
/* recycle */
buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
goto next_desc;
}
PCI_DMA_FROMDEVICE);
buffer_info->dma = 0;
- if (!(staterr & E1000_RXD_STAT_EOP)) {
+ /* see !EOP comment in other rx routine */
+ if (!(staterr & E1000_RXD_STAT_EOP))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
e_dbg("Packet Split buffers didn't pick up the full "
"packet\n");
dev_kfree_skb_irq(skb);
+ if (staterr & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
goto next_desc;
}
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
writel(0, adapter->hw.hw_addr + rx_ring->head);
writel(0, adapter->hw.hw_addr + rx_ring->tail);
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
switch (adapter->rx_buffer_len) {
- case 256:
- rctl |= E1000_RCTL_SZ_256;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case 512:
- rctl |= E1000_RCTL_SZ_512;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case 1024:
- rctl |= E1000_RCTL_SZ_1024;
- rctl &= ~E1000_RCTL_BSEX;
- break;
case 2048:
default:
rctl |= E1000_RCTL_SZ_2048;
0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
e1000_put_txbuf(adapter, buffer_info);;
}
* fragmented skbs
*/
- if (max_frame <= 256)
- adapter->rx_buffer_len = 256;
- else if (max_frame <= 512)
- adapter->rx_buffer_len = 512;
- else if (max_frame <= 1024)
- adapter->rx_buffer_len = 1024;
- else if (max_frame <= 2048)
+ if (max_frame <= 2048)
adapter->rx_buffer_len = 2048;
else
adapter->rx_buffer_len = 4096;
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
struct skb_frag_struct *frag;
+ count++;
i++;
if (i == tx_ring->count)
i = 0;
if (pci_dma_mapping_error(pdev, buffer_info->dma))
goto dma_error;
- count++;
}
tx_ring->buffer_info[i].skb = skb;
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
struct skb_frag_struct *frag;
+ count++;
i++;
if (i == tx_ring->count)
i = 0;
PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(pdev, buffer_info->dma))
goto dma_error;
- count++;
}
tx_ring->buffer_info[i].skb = skb;
buffer_info->length = 0;
buffer_info->next_to_watch = 0;
buffer_info->mapped_as_page = false;
- count--;
+ if (count)
+ count--;
/* clear timestamp and dma mappings for remaining portion of packet */
- while (count >= 0) {
- count--;
- i--;
- if (i < 0)
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
igbvf_put_txbuf(adapter, buffer_info);
}
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
}
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check =
~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
tx_buffer_info->dma = 0;
tx_buffer_info->time_stamp = 0;
tx_buffer_info->next_to_watch = 0;
- count--;
+ if (count)
+ count--;
/* clear timestamp and dma mappings for remaining portion of packet */
- while (count >= 0) {
- count--;
- i--;
- if (i < 0)
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
tx_buffer_info = &tx_ring->tx_buffer_info[i];
ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
}
PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
PCMCIA_DEVICE_NULL,
static void phy_change(struct work_struct *work);
-static void phy_state_machine(struct work_struct *work);
/**
* phy_start_machine - start PHY state machine tracking
{
phydev->adjust_state = handler;
- INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
schedule_delayed_work(&phydev->state_queue, HZ);
}
* phy_state_machine - Handle the state machine
* @work: work_struct that describes the work to be done
*/
-static void phy_state_machine(struct work_struct *work)
+void phy_state_machine(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct phy_device *phydev =
dev->state = PHY_DOWN;
mutex_init(&dev->lock);
+ INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
return dev;
}
err = pcie_set_readrq(pdev, 4096);
if (err) {
dev_err(&pdev->dev, "Set readrq failed.\n");
- goto err_out;
+ goto err_out1;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "No usable DMA configuration.\n");
- goto err_out;
+ goto err_out2;
}
/* Set PCIe reset type for EEH to fundamental. */
if (!qdev->reg_base) {
dev_err(&pdev->dev, "Register mapping failed.\n");
err = -ENOMEM;
- goto err_out;
+ goto err_out2;
}
qdev->doorbell_area_size = pci_resource_len(pdev, 3);
if (!qdev->doorbell_area) {
dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
err = -ENOMEM;
- goto err_out;
+ goto err_out2;
}
err = ql_get_board_info(qdev);
if (err) {
dev_err(&pdev->dev, "Register access failed.\n");
err = -EIO;
- goto err_out;
+ goto err_out2;
}
qdev->msg_enable = netif_msg_init(debug, default_msg);
spin_lock_init(&qdev->hw_lock);
err = qdev->nic_ops->get_flash(qdev);
if (err) {
dev_err(&pdev->dev, "Invalid FLASH.\n");
- goto err_out;
+ goto err_out2;
}
memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
DRV_NAME, DRV_VERSION);
}
return 0;
-err_out:
+err_out2:
ql_release_all(pdev);
+err_out1:
pci_disable_device(pdev);
return err;
}
break;
}
} else {
- if (!(val64 & busy_bit)) {
+ if (val64 & busy_bit) {
ret = SUCCESS;
break;
}
loff_t offset, u8 *buffer, size_t length)
{
u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN];
- u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)];
+ u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
size_t outlen;
int rc;
int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
loff_t offset, const u8 *buffer, size_t length)
{
- u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)];
+ u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
int rc;
MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type);
BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0);
- rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf),
+ rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf,
+ ALIGN(MC_CMD_NVRAM_WRITE_IN_LEN(length), 4),
NULL, 0, NULL);
if (rc)
goto fail;
extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
loff_t offset, const u8 *buffer,
size_t length);
+#define EFX_MCDI_NVRAM_LEN_MAX 128
extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
loff_t offset, size_t length);
extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
#define MC_CMD_MAC_RX_LANES01_DISP_ERR 57
#define MC_CMD_MAC_RX_LANES23_DISP_ERR 58
#define MC_CMD_MAC_RX_MATCH_FAULT 59
+#define MC_CMD_GMAC_DMABUF_START 64
+#define MC_CMD_GMAC_DMABUF_END 95
/* Insert new members here. */
-#define MC_CMD_MAC_GENERATION_END 60
+#define MC_CMD_MAC_GENERATION_END 96
#define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1)
/* MC_CMD_MAC_STATS:
#include "mcdi_pcol.h"
#define EFX_SPI_VERIFY_BUF_LEN 16
-#define EFX_MCDI_CHUNK_LEN 128
struct efx_mtd_partition {
struct mtd_info mtd;
int rc = 0;
while (offset < end) {
- chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+ chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset,
buffer, chunk);
if (rc)
}
while (offset < end) {
- chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+ chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset,
buffer, chunk);
if (rc)
/* Wait 250ms for the PHY to complete bootup */
msleep(250);
- /* Check that all the MMDs we expect are present and responding. We
- * expect faults on some if the link is down, but not on the PHY XS */
- rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
- if (rc < 0)
- goto fail;
-
falcon_board(efx)->type->init_phy(efx);
return rc;
{
u32 reg1;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~phy_power[port];
reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_FE)
gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
}
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
/* Force a renegotiation */
/* reset PHY Link Detect */
phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_link_up(sky2);
}
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
u32 err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
0xfffffffful);
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_HWE_L1_MASK)
}
sky2_power_on(hw);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
/* reset PHY Link Detect */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4,
reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
/* restore the PCIe Link Control register */
sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
}
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
}
+static void sky2_hw_set_wol(struct sky2_hw *hw)
+{
+ int wol = 0;
+ int i;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol)
+ wol = 1;
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
+ sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+ device_set_wakeup_enable(&hw->pdev->dev, wol);
+}
+
static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
const struct sky2_port *sky2 = netdev_priv(dev);
sky2->wol = wol->wolopts;
- if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
- hw->chip_id == CHIP_ID_YUKON_EX ||
- hw->chip_id == CHIP_ID_YUKON_FE_P)
- sky2_write32(hw, B0_CTST, sky2->wol
- ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
-
- device_set_wakeup_enable(&hw->pdev->dev, sky2->wol);
+ sky2_hw_set_wol(hw);
if (!netif_running(dev))
sky2_wol_init(sky2);
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
+ { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
{ 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ } /* terminate list */
};
/* Handle the transmitted buffer and release */
/* the BD to be used with the current frame */
- if (bd == ugeth->txBd[txQ]) /* queue empty? */
+ skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
+ if (!skb)
break;
dev->stats.tx_packets++;
- skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
-
if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN &&
skb_recycle_check(skb,
ugeth->ug_info->uf_info.max_rx_buf_length +
vi = container_of(work, struct virtnet_info, refill.work);
napi_disable(&vi->napi);
- try_fill_recv(vi, GFP_KERNEL);
- still_empty = (vi->num == 0);
+ still_empty = !try_fill_recv(vi, GFP_KERNEL);
napi_enable(&vi->napi);
/* In theory, this can happen: if we don't get any buffers in
/* Device IDs */
USB_DEVICE_ID_I6050 = 0x0186,
+ USB_DEVICE_ID_I6050_2 = 0x0188,
};
u8 rx_size_auto_shrink;
struct dentry *debugfs_dentry;
+ unsigned i6050:1; /* 1 if this is a 6050 based SKU */
};
i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
i2400m->bus_bm_mac_addr_impaired = 0;
- if (id->idProduct == USB_DEVICE_ID_I6050) {
+ switch (id->idProduct) {
+ case USB_DEVICE_ID_I6050:
+ case USB_DEVICE_ID_I6050_2:
+ i2400mu->i6050 = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (i2400mu->i6050) {
i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
i2400mu->endpoint_cfg.bulk_out = 0;
i2400mu->endpoint_cfg.notification = 3;
static
struct usb_device_id i2400mu_id_table[] = {
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
+ { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
{ USB_DEVICE(0x8086, 0x0181) },
{ USB_DEVICE(0x8086, 0x1403) },
{ USB_DEVICE(0x8086, 0x1405) },
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
#include <linux/module.h>
/* sparse doesn't like tracepoint macros */
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
#if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
#define __IWLWIFI_DEVICE_TRACE
memset(&update, 0, sizeof(struct iwm_umac_pmkid_update));
+ update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE;
+ update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) -
+ sizeof(struct iwm_umac_wifi_if));
+
update.command = cpu_to_le32(command);
if (pmksa->bssid)
memcpy(&update.bssid, pmksa->bssid, ETH_ALEN);
#define IWM_CMD_PMKID_FLUSH 3
struct iwm_umac_pmkid_update {
+ struct iwm_umac_wifi_if hdr;
__le32 command;
u8 bssid[ETH_ALEN];
__le16 reserved;
i %= ring_limit;
continue;
}
+
+ if (unlikely(len > priv->common.rx_mtu)) {
+ if (net_ratelimit())
+ dev_err(&priv->pdev->dev, "rx'd frame size "
+ "exceeds length threshold.\n");
+
+ len = priv->common.rx_mtu;
+ }
skb_put(skb, len);
if (p54_rx(dev, skb)) {
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever, mask;
+ u32 sever, cor_mask, uncor_mask;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
goto out_put;
}
pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask);
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+ &uncor_mask);
rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
if (!rp_pos_cap_err) {
err->header_log2 = einj->header_log2;
err->header_log3 = einj->header_log3;
- pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask);
- if (einj->cor_status && !(einj->cor_status & ~mask)) {
+ if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The correctable error(s) is masked "
"by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
-
- pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask);
- if (einj->uncor_status && !(einj->uncor_status & ~mask)) {
+ if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The uncorrectable error(s) is masked "
"by device\n");
dev->irq = irq;
}
-static void set_pcie_port_type(struct pci_dev *pdev)
+void set_pcie_port_type(struct pci_dev *pdev)
{
int pos;
u16 reg16;
pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
}
-static void set_pcie_hotplug_bridge(struct pci_dev *pdev)
+void set_pcie_hotplug_bridge(struct pci_dev *pdev)
{
int pos;
u16 reg16;
select HWMON
select LEDS_CLASS
select NEW_LEDS
+ select INPUT_SPARSEKMAP
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
#include <acpi/acpi_bus.h>
#include <linux/uaccess.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/leds.h>
+#include <linux/dmi.h>
#define EEEPC_LAPTOP_VERSION "0.1"
#define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver"
MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME);
MODULE_LICENSE("GPL");
+static bool hotplug_disabled;
+
+module_param(hotplug_disabled, bool, 0644);
+MODULE_PARM_DESC(hotplug_disabled,
+ "Disable hotplug for wireless device. "
+ "If your laptop need that, please report to "
+ "acpi4asus-user@lists.sourceforge.net.");
+
/*
* Definitions for Asus EeePC
*/
NULL, NULL, "PBPS", "TPDS"
};
-struct key_entry {
- char type;
- u8 code;
- u16 keycode;
-};
-
-enum { KE_KEY, KE_END };
-
static const struct key_entry eeepc_keymap[] = {
- /* Sleep already handled via generic ACPI code */
- {KE_KEY, 0x10, KEY_WLAN },
- {KE_KEY, 0x11, KEY_WLAN },
- {KE_KEY, 0x12, KEY_PROG1 },
- {KE_KEY, 0x13, KEY_MUTE },
- {KE_KEY, 0x14, KEY_VOLUMEDOWN },
- {KE_KEY, 0x15, KEY_VOLUMEUP },
- {KE_KEY, 0x16, KEY_DISPLAY_OFF },
- {KE_KEY, 0x1a, KEY_COFFEE },
- {KE_KEY, 0x1b, KEY_ZOOM },
- {KE_KEY, 0x1c, KEY_PROG2 },
- {KE_KEY, 0x1d, KEY_PROG3 },
- {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN },
- {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP },
- {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */
- {KE_KEY, 0x38, KEY_F14 },
- {KE_END, 0},
+ { KE_KEY, 0x10, { KEY_WLAN } },
+ { KE_KEY, 0x11, { KEY_WLAN } },
+ { KE_KEY, 0x12, { KEY_PROG1 } },
+ { KE_KEY, 0x13, { KEY_MUTE } },
+ { KE_KEY, 0x14, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x15, { KEY_VOLUMEUP } },
+ { KE_KEY, 0x16, { KEY_DISPLAY_OFF } },
+ { KE_KEY, 0x1a, { KEY_COFFEE } },
+ { KE_KEY, 0x1b, { KEY_ZOOM } },
+ { KE_KEY, 0x1c, { KEY_PROG2 } },
+ { KE_KEY, 0x1d, { KEY_PROG3 } },
+ { KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } },
+ { KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } },
+ { KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */
+ { KE_KEY, 0x38, { KEY_F14 } },
+ { KE_END, 0 },
};
-
/*
* This is the main structure, we can use it to store useful information
*/
acpi_handle handle; /* the handle of the acpi device */
u32 cm_supported; /* the control methods supported
by this BIOS */
+ bool cpufv_disabled;
+ bool hotplug_disabled;
u16 event_count[128]; /* count for each event */
struct platform_device *platform_device;
struct eeepc_cpufv c;
int rv, value;
+ if (eeepc->cpufv_disabled)
+ return -EPERM;
if (get_cpufv(eeepc, &c))
return -ENODEV;
rv = parse_arg(buf, count, &value);
return rv;
}
+static ssize_t show_cpufv_disabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", eeepc->cpufv_disabled);
+}
+
+static ssize_t store_cpufv_disabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv < 0)
+ return rv;
+
+ switch (value) {
+ case 0:
+ if (eeepc->cpufv_disabled)
+ pr_warning("cpufv enabled (not officially supported "
+ "on this model)\n");
+ eeepc->cpufv_disabled = false;
+ return rv;
+ case 1:
+ return -EPERM;
+ default:
+ return -EINVAL;
+ }
+}
+
+
static struct device_attribute dev_attr_cpufv = {
.attr = {
.name = "cpufv",
.show = show_available_cpufv
};
+static struct device_attribute dev_attr_cpufv_disabled = {
+ .attr = {
+ .name = "cpufv_disabled",
+ .mode = 0644 },
+ .show = show_cpufv_disabled,
+ .store = store_cpufv_disabled
+};
+
+
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
&dev_attr_cpufv.attr,
&dev_attr_available_cpufv.attr,
+ &dev_attr_cpufv_disabled.attr,
NULL
};
if (result && result != -ENODEV)
goto exit;
+ if (eeepc->hotplug_disabled)
+ return 0;
+
result = eeepc_setup_pci_hotplug(eeepc);
/*
* If we get -EBUSY then something else is handling the PCI hotplug -
/*
* Input device (i.e. hotkeys)
*/
-static struct key_entry *eeepc_get_entry_by_scancode(
- struct eeepc_laptop *eeepc,
- int code)
+static int eeepc_input_init(struct eeepc_laptop *eeepc)
{
- struct key_entry *key;
+ struct input_dev *input;
+ int error;
- for (key = eeepc->keymap; key->type != KE_END; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event)
-{
- static struct key_entry *key;
-
- key = eeepc_get_entry_by_scancode(eeepc, event);
- if (key) {
- switch (key->type) {
- case KE_KEY:
- input_report_key(eeepc->inputdev, key->keycode,
- 1);
- input_sync(eeepc->inputdev);
- input_report_key(eeepc->inputdev, key->keycode,
- 0);
- input_sync(eeepc->inputdev);
- break;
- }
+ input = input_allocate_device();
+ if (!input) {
+ pr_info("Unable to allocate input device\n");
+ return -ENOMEM;
}
-}
-
-static struct key_entry *eeepc_get_entry_by_keycode(
- struct eeepc_laptop *eeepc, int code)
-{
- struct key_entry *key;
-
- for (key = eeepc->keymap; key->type != KE_END; key++)
- if (code == key->keycode && key->type == KE_KEY)
- return key;
- return NULL;
-}
+ input->name = "Asus EeePC extra buttons";
+ input->phys = EEEPC_LAPTOP_FILE "/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &eeepc->platform_device->dev;
-static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
-{
- struct eeepc_laptop *eeepc = input_get_drvdata(dev);
- struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode);
-
- if (key && key->type == KE_KEY) {
- *keycode = key->keycode;
- return 0;
+ error = sparse_keymap_setup(input, eeepc_keymap, NULL);
+ if (error) {
+ pr_err("Unable to setup input device keymap\n");
+ goto err_free_dev;
}
- return -EINVAL;
-}
-
-static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
- struct eeepc_laptop *eeepc = input_get_drvdata(dev);
- struct key_entry *key;
- int old_keycode;
-
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = eeepc_get_entry_by_scancode(eeepc, scancode);
- if (key && key->type == KE_KEY) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!eeepc_get_entry_by_keycode(eeepc, old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
+ error = input_register_device(input);
+ if (error) {
+ pr_err("Unable to register input device\n");
+ goto err_free_keymap;
}
- return -EINVAL;
-}
-
-static int eeepc_input_init(struct eeepc_laptop *eeepc)
-{
- const struct key_entry *key;
- int result;
-
- eeepc->inputdev = input_allocate_device();
- if (!eeepc->inputdev) {
- pr_info("Unable to allocate input device\n");
- return -ENOMEM;
- }
- eeepc->inputdev->name = "Asus EeePC extra buttons";
- eeepc->inputdev->dev.parent = &eeepc->platform_device->dev;
- eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0";
- eeepc->inputdev->id.bustype = BUS_HOST;
- eeepc->inputdev->getkeycode = eeepc_getkeycode;
- eeepc->inputdev->setkeycode = eeepc_setkeycode;
- input_set_drvdata(eeepc->inputdev, eeepc);
-
- eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap),
- GFP_KERNEL);
- for (key = eeepc_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_KEY:
- set_bit(EV_KEY, eeepc->inputdev->evbit);
- set_bit(key->keycode, eeepc->inputdev->keybit);
- break;
- }
- }
- result = input_register_device(eeepc->inputdev);
- if (result) {
- pr_info("Unable to register input device\n");
- input_free_device(eeepc->inputdev);
- return result;
- }
+ eeepc->inputdev = input;
return 0;
+
+ err_free_keymap:
+ sparse_keymap_free(input);
+ err_free_dev:
+ input_free_device(input);
+ return error;
}
static void eeepc_input_exit(struct eeepc_laptop *eeepc)
* event will be desired value (or else ignored)
*/
}
- eeepc_input_notify(eeepc, event);
+ sparse_keymap_report_event(eeepc->inputdev, event,
+ 1, true);
}
} else {
/* Everything else is a bona-fide keypress event */
- eeepc_input_notify(eeepc, event);
+ sparse_keymap_report_event(eeepc->inputdev, event, 1, true);
+ }
+}
+
+static void eeepc_dmi_check(struct eeepc_laptop *eeepc)
+{
+ const char *model;
+
+ model = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!model)
+ return;
+
+ /*
+ * Blacklist for setting cpufv (cpu speed).
+ *
+ * EeePC 4G ("701") implements CFVS, but it is not supported
+ * by the pre-installed OS, and the original option to change it
+ * in the BIOS setup screen was removed in later versions.
+ *
+ * Judging by the lack of "Super Hybrid Engine" on Asus product pages,
+ * this applies to all "701" models (4G/4G Surf/2G Surf).
+ *
+ * So Asus made a deliberate decision not to support it on this model.
+ * We have several reports that using it can cause the system to hang
+ *
+ * The hang has also been reported on a "702" (Model name "8G"?).
+ *
+ * We avoid dmi_check_system() / dmi_match(), because they use
+ * substring matching. We don't want to affect the "701SD"
+ * and "701SDX" models, because they do support S.H.E.
+ */
+ if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) {
+ eeepc->cpufv_disabled = true;
+ pr_info("model %s does not officially support setting cpu "
+ "speed\n", model);
+ pr_info("cpufv disabled to avoid instability\n");
+ }
+
+ /*
+ * Blacklist for wlan hotplug
+ *
+ * Eeepc 1005HA doesn't work like others models and don't need the
+ * hotplug code. In fact, current hotplug code seems to unplug another
+ * device...
+ */
+ if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) {
+ eeepc->hotplug_disabled = true;
+ pr_info("wlan hotplug disabled\n");
}
}
strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS);
device->driver_data = eeepc;
+ eeepc->hotplug_disabled = hotplug_disabled;
+
+ eeepc_dmi_check(eeepc);
+
result = eeepc_acpi_init(eeepc, device);
if (result)
goto fail_platform;
result = acpi_bus_register_driver(&eeepc_acpi_driver);
if (result < 0)
goto fail_acpi_driver;
+
if (!eeepc_device_present) {
result = -ENODEV;
goto fail_no_device;
}
+
return 0;
fail_no_device:
/* the buffer is filled with magic numbers describing the devices
* available, 0xff terminates the enumeration
*/
- while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff &&
- i < device_enum->buffer.length) {
- i++;
+ for (i = 0; i < device_enum->buffer.length; i++) {
+
+ dev_code = *(device_enum->buffer.pointer + i);
+ if (dev_code == 0xff)
+ break;
+
dprintk("Radio devices, looking at 0x%.2x\n", dev_code);
if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI])
led->isink_init.consumer_supplies = &led->isink_consumer;
led->isink_init.constraints.min_uA = 0;
led->isink_init.constraints.max_uA = pdata->max_uA;
- led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT;
+ led->isink_init.constraints.valid_ops_mask
+ = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS;
led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
ret = wm8350_register_regulator(wm8350, isink, &led->isink_init);
if (ret != 0) {
led->dcdc_init.num_consumer_supplies = 1;
led->dcdc_init.consumer_supplies = &led->dcdc_consumer;
led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
+ led->dcdc_init.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init);
if (ret != 0) {
platform_device_put(pdev);
if (device == NULL ||
device != dasd_device_from_cdev_locked(cdev) ||
strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
- DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
- "bus_id %s", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+ "invalid device in request");
return;
}
device = (struct dasd_device *) cqr->startdev;
if (!device ||
strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
- DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
- "bus_id %s", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+ "invalid device in request");
return;
}
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n",
req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
- scsw_cc(&irb->scsw), req->intrc);
+ scsw_cc(&irb->scsw), req ? req->intrc : 0);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" device %s: Failing CCW: %p\n",
dev_name(&device->cdev->dev),
struct ccw_dev_id dev_id;
base = block->base;
- if (!base->discipline->fill_info)
+ if (!base->discipline || !base->discipline->fill_info)
return -EINVAL;
dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL);
dasd_info->features |=
((base->features & DASD_FEATURE_READONLY) != 0);
- if (base->discipline)
- memcpy(dasd_info->type, base->discipline->name, 4);
- else
- memcpy(dasd_info->type, "none", 4);
+ memcpy(dasd_info->type, base->discipline->name, 4);
if (block->request_queue->request_fn) {
struct list_head *l;
/* Print device number. */
seq_printf(m, "%s", dev_name(&device->cdev->dev));
/* Print discipline string. */
- if (device != NULL && device->discipline != NULL)
+ if (device->discipline != NULL)
seq_printf(m, "(%s)", device->discipline->name);
else
seq_printf(m, "(none)");
substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " ";
seq_printf(m, "%4s: ", substr);
/* Print device status information. */
- switch ((device != NULL) ? device->state : -1) {
- case -1:
- seq_printf(m, "unknown");
- break;
+ switch (device->state) {
case DASD_STATE_NEW:
seq_printf(m, "new");
break;
if (tty->driver_data == NULL)
return -ENOMEM;
tty->low_latency = 0;
+ if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+ tty->winsize.ws_row = 24;
+ tty->winsize.ws_col = 80;
+ }
}
return 0;
}
zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD;
return -EAGAIN;
}
+ if (service_rc == 8 && service_rs == 72)
+ return -EINVAL;
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
}
}
if (service_rc == 12 && service_rs == 769)
return -EINVAL;
+ if (service_rc == 8 && service_rs == 72)
+ return -EINVAL;
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
}
#include <linux/types.h>
#include <linux/miscdevice.h>
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include "zfcp_def.h"
#include "zfcp_ext.h"
}
static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
- unsigned long buffer)
+ unsigned long arg)
{
struct zfcp_cfdc_data *data;
struct zfcp_cfdc_data __user *data_user;
if (command != ZFCP_CFDC_IOC)
return -ENOTTY;
- data_user = (void __user *) buffer;
+ if (is_compat_task())
+ data_user = compat_ptr(arg);
+ else
+ data_user = (void __user *)arg;
+
if (!data_user)
return -EINVAL;
break;
zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd);
zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial);
- p += sprintf(*p, "\n");
+ *p += sprintf(*p, "\n");
break;
case FSF_QTCB_OPEN_PORT_WITH_DID:
extern int zfcp_fc_gs_setup(struct zfcp_adapter *);
extern void zfcp_fc_gs_destroy(struct zfcp_adapter *);
extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
+extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
extern int zfcp_fsf_status_read(struct zfcp_qdio *);
extern int zfcp_status_read_refill(struct zfcp_adapter *adapter);
extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *,
- mempool_t *);
+ mempool_t *, unsigned int);
extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32,
- struct zfcp_fsf_ct_els *);
+ struct zfcp_fsf_ct_els *, unsigned int);
extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *,
struct scsi_cmnd *);
extern void zfcp_fsf_req_free(struct zfcp_fsf_req *);
gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn;
ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct,
- adapter->pool.gid_pn_req);
+ adapter->pool.gid_pn_req,
+ ZFCP_FC_CTELS_TMO);
if (!ret) {
wait_for_completion(&completion);
zfcp_fc_ns_gid_pn_eval(gid_pn);
hton24(adisc->adisc_req.adisc_port_id,
fc_host_port_id(adapter->scsi_host));
- ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els);
+ ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els,
+ ZFCP_FC_CTELS_TMO);
if (ret)
kmem_cache_free(zfcp_data.adisc_cache, adisc);
ct->req = &gpn_ft->sg_req;
ct->resp = gpn_ft->sg_resp;
- ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL);
+ ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL,
+ ZFCP_FC_CTELS_TMO);
if (!ret)
wait_for_completion(&completion);
return ret;
job->job_done(job);
}
+static struct zfcp_fc_wka_port *zfcp_fc_job_wka_port(struct fc_bsg_job *job)
+{
+ u32 preamble_word1;
+ u8 gs_type;
+ struct zfcp_adapter *adapter;
+
+ preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
+ gs_type = (preamble_word1 & 0xff000000) >> 24;
+
+ adapter = (struct zfcp_adapter *) job->shost->hostdata[0];
+
+ switch (gs_type) {
+ case FC_FST_ALIAS:
+ return &adapter->gs->as;
+ case FC_FST_MGMT:
+ return &adapter->gs->ms;
+ case FC_FST_TIME:
+ return &adapter->gs->ts;
+ break;
+ case FC_FST_DIR:
+ return &adapter->gs->ds;
+ break;
+ default:
+ return NULL;
+ }
+}
+
+static void zfcp_fc_ct_job_handler(void *data)
+{
+ struct fc_bsg_job *job = data;
+ struct zfcp_fc_wka_port *wka_port;
+
+ wka_port = zfcp_fc_job_wka_port(job);
+ zfcp_fc_wka_port_put(wka_port);
+
+ zfcp_fc_ct_els_job_handler(data);
+}
+
static int zfcp_fc_exec_els_job(struct fc_bsg_job *job,
struct zfcp_adapter *adapter)
{
} else
d_id = ntoh24(job->request->rqst_data.h_els.port_id);
- return zfcp_fsf_send_els(adapter, d_id, els);
+ els->handler = zfcp_fc_ct_els_job_handler;
+ return zfcp_fsf_send_els(adapter, d_id, els, job->req->timeout / HZ);
}
static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job,
struct zfcp_adapter *adapter)
{
int ret;
- u8 gs_type;
struct zfcp_fsf_ct_els *ct = job->dd_data;
struct zfcp_fc_wka_port *wka_port;
- u32 preamble_word1;
- preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
- gs_type = (preamble_word1 & 0xff000000) >> 24;
-
- switch (gs_type) {
- case FC_FST_ALIAS:
- wka_port = &adapter->gs->as;
- break;
- case FC_FST_MGMT:
- wka_port = &adapter->gs->ms;
- break;
- case FC_FST_TIME:
- wka_port = &adapter->gs->ts;
- break;
- case FC_FST_DIR:
- wka_port = &adapter->gs->ds;
- break;
- default:
- return -EINVAL; /* no such service */
- }
+ wka_port = zfcp_fc_job_wka_port(job);
+ if (!wka_port)
+ return -EINVAL;
ret = zfcp_fc_wka_port_get(wka_port);
if (ret)
return ret;
- ret = zfcp_fsf_send_ct(wka_port, ct, NULL);
+ ct->handler = zfcp_fc_ct_job_handler;
+ ret = zfcp_fsf_send_ct(wka_port, ct, NULL, job->req->timeout / HZ);
if (ret)
zfcp_fc_wka_port_put(wka_port);
ct_els->req = job->request_payload.sg_list;
ct_els->resp = job->reply_payload.sg_list;
- ct_els->handler = zfcp_fc_ct_els_job_handler;
ct_els->handler_data = job;
switch (job->request->msgcode) {
}
}
+int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *job)
+{
+ /* hardware tracks timeout, reset bsg timeout to not interfere */
+ return -EAGAIN;
+}
+
int zfcp_fc_gs_setup(struct zfcp_adapter *adapter)
{
struct zfcp_fc_wka_ports *wka_ports;
#define ZFCP_FC_GPN_FT_MAX_ENT (ZFCP_FC_GPN_FT_NUM_BUFS * \
(ZFCP_FC_GPN_FT_ENT_PAGE + 1))
+#define ZFCP_FC_CTELS_TMO (2 * FC_DEF_R_A_TOV / 1000)
+
/**
* struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request
* @ct_hdr: FC GS common transport header
static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
struct scatterlist *sg_req,
struct scatterlist *sg_resp,
- int max_sbals)
+ int max_sbals, unsigned int timeout)
{
int ret;
- unsigned int fcp_chan_timeout;
ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
if (ret)
return ret;
/* common settings for ct/gs and els requests */
- fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000;
+ if (timeout > 255)
+ timeout = 255; /* max value accepted by hardware */
req->qtcb->bottom.support.service_class = FSF_CLASS_3;
- req->qtcb->bottom.support.timeout = fcp_chan_timeout;
- zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ);
+ req->qtcb->bottom.support.timeout = timeout;
+ zfcp_fsf_start_timer(req, (timeout + 10) * HZ);
return 0;
}
* @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req
*/
int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port,
- struct zfcp_fsf_ct_els *ct, mempool_t *pool)
+ struct zfcp_fsf_ct_els *ct, mempool_t *pool,
+ unsigned int timeout)
{
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
struct zfcp_fsf_req *req;
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
- FSF_MAX_SBALS_PER_REQ);
+ FSF_MAX_SBALS_PER_REQ, timeout);
if (ret)
goto failed_send;
* @els: pointer to struct zfcp_send_els with data for the command
*/
int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id,
- struct zfcp_fsf_ct_els *els)
+ struct zfcp_fsf_ct_els *els, unsigned int timeout)
{
struct zfcp_fsf_req *req;
struct zfcp_qdio *qdio = adapter->qdio;
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
+ ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2, timeout);
if (ret)
goto failed_send;
.show_host_port_state = 1,
.show_host_active_fc4s = 1,
.bsg_request = zfcp_fc_exec_bsg_job,
+ .bsg_timeout = zfcp_fc_timeout_bsg_job,
/* no functions registered for following dynamic attributes but
directly set by LLDD */
.show_host_port_type = 1,
status = -EINVAL;
}
}
- aac_fib_complete(fibptr);
+ /* Do not set XferState to zero unless receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
+
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
if (status >= 0) {
if ((aac_commit == 1) || commit_flag) {
FsaNormal,
1, 1,
NULL, NULL);
- aac_fib_complete(fibptr);
+ /* Do not set XferState to zero unless
+ * receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
} else if (aac_commit == 0) {
printk(KERN_WARNING
"aac_get_config_status: Foreign device configurations are being ignored\n");
}
}
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
return status;
}
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
aac_fib_complete(fibptr);
}
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
NULL);
if (rcode < 0) {
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* FIB should be freed only after
+ * getting the response from the F/W */
+ if (rcode != -ERESTARTSYS) {
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
return rcode;
}
memcpy(&dev->adapter_info, info, sizeof(*info));
if (rcode >= 0)
memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
+ if (rcode == -ERESTARTSYS) {
+ fibptr = aac_fib_alloc(dev);
+ if (!fibptr)
+ return -ENOMEM;
+ }
+
}
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
}
}
-
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (rcode != -ERESTARTSYS) {
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
return rcode;
}
* Alocate and initialize a Fib
*/
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+ printk(KERN_WARNING "aac_read: fib allocation failed\n");
return -1;
}
* Allocate and initialize a Fib then setup a BlockWrite command
*/
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
- scsicmd->result = DID_ERROR << 16;
- scsicmd->scsi_done(scsicmd);
- return 0;
+ /* FIB temporarily unavailable,not catastrophic failure */
+
+ /* scsicmd->result = DID_ERROR << 16;
+ * scsicmd->scsi_done(scsicmd);
+ * return 0;
+ */
+ printk(KERN_WARNING "aac_write: fib allocation failed\n");
+ return -1;
}
status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2461
+# define AAC_DRIVER_BUILD 24702
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
u8 printf_enabled;
u8 in_reset;
u8 msi;
+ int management_fib_count;
+ spinlock_t manage_lock;
+
};
#define aac_adapter_interrupt(dev) \
fibptr->hw_fib_pa = hw_fib_pa;
fibptr->hw_fib_va = hw_fib;
}
- if (retval != -EINTR)
+ if (retval != -ERESTARTSYS)
aac_fib_free(fibptr);
return retval;
}
}
if (f.wait) {
if(down_interruptible(&fibctx->wait_sem) < 0) {
- status = -EINTR;
+ status = -ERESTARTSYS;
} else {
/* Lock again and retry */
spin_lock_irqsave(&dev->fib_lock, flags);
u64 addr;
void* p;
if (upsg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
u64 addr;
void* p;
if (usg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
uintptr_t addr;
void* p;
if (usg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
dma_addr_t addr;
void* p;
if (upsg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
psg->count = cpu_to_le32(sg_indx+1);
status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
}
- if (status == -EINTR) {
- rcode = -EINTR;
+ if (status == -ERESTARTSYS) {
+ rcode = -ERESTARTSYS;
goto cleanup;
}
for(i=0; i <= sg_indx; i++){
kfree(sg_list[i]);
}
- if (rcode != -EINTR) {
+ if (rcode != -ERESTARTSYS) {
aac_fib_complete(srbfib);
aac_fib_free(srbfib);
}
*/
status = aac_dev_ioctl(dev, cmd, arg);
- if(status != -ENOTTY)
+ if (status != -ENOTTY)
return status;
switch (cmd) {
if (status >= 0)
aac_fib_complete(fibctx);
- aac_fib_free(fibctx);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
return status;
}
/*
* Check the preferred comm settings, defaults from template.
*/
+ dev->management_fib_count = 0;
+ spin_lock_init(&dev->manage_lock);
dev->max_fib_size = sizeof(struct hw_fib);
dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
- sizeof(struct aac_fibhdr)
void aac_fib_free(struct fib *fibptr)
{
- unsigned long flags;
+ unsigned long flags, flagsv;
+
+ spin_lock_irqsave(&fibptr->event_lock, flagsv);
+ if (fibptr->done == 2) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
+ return;
+ }
+ spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
struct hw_fib * hw_fib = fibptr->hw_fib_va;
unsigned long flags = 0;
unsigned long qflags;
+ unsigned long mflags = 0;
+
if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
return -EBUSY;
if (!dev->queues)
return -EBUSY;
- if(wait)
+ if (wait) {
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ if (dev->management_fib_count >= AAC_NUM_MGT_FIB) {
+ printk(KERN_INFO "No management Fibs Available:%d\n",
+ dev->management_fib_count);
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+ return -EBUSY;
+ }
+ dev->management_fib_count++;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
spin_lock_irqsave(&fibptr->event_lock, flags);
- aac_adapter_deliver(fibptr);
+ }
+
+ if (aac_adapter_deliver(fibptr) != 0) {
+ printk(KERN_ERR "aac_fib_send: returned -EBUSY\n");
+ if (wait) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+ }
+ return -EBUSY;
+ }
+
/*
* If the caller wanted us to wait for response wait now.
udelay(5);
}
} else if (down_interruptible(&fibptr->event_wait)) {
- fibptr->done = 2;
- up(&fibptr->event_wait);
+ /* Do nothing ... satisfy
+ * down_interruptible must_check */
}
+
spin_lock_irqsave(&fibptr->event_lock, flags);
- if ((fibptr->done == 0) || (fibptr->done == 2)) {
+ if (fibptr->done == 0) {
fibptr->done = 2; /* Tell interrupt we aborted */
spin_unlock_irqrestore(&fibptr->event_lock, flags);
- return -EINTR;
+ return -ERESTARTSYS;
}
spin_unlock_irqrestore(&fibptr->event_lock, flags);
BUG_ON(fibptr->done == 0);
int aac_fib_complete(struct fib *fibptr)
{
+ unsigned long flags;
struct hw_fib * hw_fib = fibptr->hw_fib_va;
/*
* command is complete that we had sent to the adapter and this
* cdb could be reused.
*/
+ spin_lock_irqsave(&fibptr->event_lock, flags);
+ if (fibptr->done == 2) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+
if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
(hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
{
if (status >= 0)
aac_fib_complete(fibctx);
- aac_fib_free(fibctx);
+ /* FIB should be freed only after getting
+ * the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
}
}
struct fib *fibptr;
if ((fibptr = aac_fib_alloc(dev))) {
+ int status;
__le32 *info;
aac_fib_init(fibptr);
*info = cpu_to_le32(now.tv_sec);
- (void)aac_fib_send(SendHostTime,
+ status = aac_fib_send(SendHostTime,
fibptr,
sizeof(*info),
FsaNormal,
1, 1,
NULL,
NULL);
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* Do not set XferState to zero unless
+ * receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
+ /* FIB should be freed only after
+ * getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
}
difference = (long)(unsigned)update_interval*HZ;
} else {
struct hw_fib * hwfib;
struct fib * fib;
int consumed = 0;
- unsigned long flags;
+ unsigned long flags, mflags;
- spin_lock_irqsave(q->lock, flags);
+ spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs. We then return
} else {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
- if (!fib->done)
+ if (!fib->done) {
fib->done = 1;
- up(&fib->event_wait);
+ up(&fib->event_wait);
+ }
spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (fib->done == 2) {
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 0;
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
aac_fib_free(fib);
}
unsigned int aac_intr_normal(struct aac_dev * dev, u32 index)
{
+ unsigned long mflags;
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index));
if ((index & 0x00000002L)) {
struct hw_fib * hw_fib;
unsigned long flagv;
dprintk((KERN_INFO "event_wait up\n"));
spin_lock_irqsave(&fib->event_lock, flagv);
- if (!fib->done)
+ if (!fib->done) {
fib->done = 1;
- up(&fib->event_wait);
+ up(&fib->event_wait);
+ }
spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+ if (fib->done == 2) {
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 0;
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
+ aac_fib_complete(fib);
+ aac_fib_free(fib);
+ }
+
}
return 0;
}
tinfo->curr.transport_version = 2;
tinfo->goal.transport_version = 2;
tinfo->goal.ppr_options = 0;
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so
- * that command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting
+ * for selection queue that may
+ * also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
}
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so that
- * command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting for
+ * selection queue that may also be for
+ * this target so that command ordering
+ * is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
&& ppr_busfree == 0) {
/*ppr_options*/0,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so that
- * command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting for
+ * selection queue that may also be for
+ * this target so that command ordering
+ * is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
} else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
&& ahd_sent_msg(ahd, AHDMSG_1B,
* the message phases. We check it last in case we
* had to send some other message that caused a busfree.
*/
- if (printerror != 0
+ if (scb != NULL && printerror != 0
&& (lastphase == P_MESGIN || lastphase == P_MESGOUT)
&& ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
*/
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
-#define FCF_TAPE_PRESENT BIT_2
-#define FCF_FCP2_DEVICE BIT_3
+#define FCF_FCP2_DEVICE BIT_2
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
switch (data[0]) {
case MBS_COMMAND_COMPLETE:
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
opts |= BIT_1;
rval = qla2x00_get_port_database(vha, fcport, opts);
if (rval != QLA_SUCCESS)
/*
* Logout all previous fabric devices marked lost, except
- * tape devices.
+ * FCP2 devices.
*/
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
qla2x00_mark_device_lost(vha, fcport,
ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
- (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+ (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha,
fcport->d_id.b24 = new_fcport->d_id.b24;
fcport->flags |= FCF_LOGIN_NEEDED;
if (fcport->loop_id != FC_NO_LOOP_ID &&
- (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+ (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
rval = qla2x00_fabric_login(vha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
- /* Send an ADISC to tape devices.*/
+ /* Send an ADISC to FCP2 devices.*/
opts = 0;
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
opts |= BIT_1;
rval = qla2x00_get_port_database(vha, fcport, opts);
if (rval != QLA_SUCCESS) {
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct qla_hw_data *ha = vha->hw;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
- fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
struct req_que *req = vha->req;
if (sdev->tagged_supported)
scsi_deactivate_tcq(sdev, req->max_q_depth);
rport->dev_loss_tmo = ha->port_down_retry_count;
- if (sdev->type == TYPE_TAPE)
- fcport->flags |= FCF_TAPE_PRESENT;
return 0;
}
fcport->login_retry--;
if (fcport->flags & FCF_FABRIC_DEVICE) {
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
ha->isp_ops->fabric_logout(vha,
fcport->loop_id,
fcport->d_id.b.domain,
if (!IS_QLA2100(ha) && vha->link_down_timeout)
atomic_set(&vha->loop_state, LOOP_DEAD);
- /* Schedule an ISP abort to return any tape commands. */
+ /*
+ * Schedule an ISP abort to return any FCP2-device
+ * commands.
+ */
/* NPIV - scan physical port only */
if (!vha->vp_idx) {
spin_lock_irqsave(&ha->hardware_lock,
if (sp->ctx)
continue;
sfcp = sp->fcport;
- if (!(sfcp->flags & FCF_TAPE_PRESENT))
+ if (!(sfcp->flags & FCF_FCP2_DEVICE))
continue;
set_bit(ISP_ABORT_NEEDED,
uint32_t faddr, left, burst;
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
+ goto try_fast;
if (offset & 0xfff)
goto slow_read;
if (length < OPTROM_BURST_SIZE)
goto slow_read;
+try_fast:
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k9"
+#define QLA2XXX_VERSION "8.03.01-k10"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
*/
req->next_rq->resid_len = scsi_in(cmd)->resid;
+ scsi_release_buffers(cmd);
blk_end_request_all(req, 0);
- scsi_release_buffers(cmd);
scsi_next_command(cmd);
return;
}
if (!done && i->f->bsg_timeout) {
/* call LLDD to abort the i/o as it has timed out */
err = i->f->bsg_timeout(job);
- if (err)
+ if (err == -EAGAIN) {
+ job->ref_cnt--;
+ return BLK_EH_RESET_TIMER;
+ } else if (err)
printk(KERN_ERR "ERROR: FC BSG request timeout - LLD "
"abort failed with status %d\n", err);
}
/* U.S. Robotics 56K Voice INT PnP*/
{ "USR9190", 0 },
/* Wacom tablets */
- { "WACF004", 0 },
- { "WACF005", 0 },
- { "WACF006", 0 },
- { "WACF007", 0 },
- { "WACF008", 0 },
- { "WACF009", 0 },
- { "WACF00A", 0 },
- { "WACF00B", 0 },
- { "WACF00C", 0 },
+ { "WACFXXX", 0 },
/* Compaq touchscreen */
{ "FPI2002", 0 },
/* Fujitsu Stylistic touchscreens */
int *parity, int *bits)
{
- if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+ if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
/* ok, the port was enabled */
unsigned int ucr2, ubir,ubmr, uartclk;
unsigned int baud_raw;
}
/*
- * As a last resort, if the quotient is zero,
- * default to 9600 bps
+ * As a last resort, if the range cannot be met then clip to
+ * the nearest chip supported rate.
*/
- if (!hung_up)
- tty_termios_encode_baud_rate(termios, 9600, 9600);
+ if (!hung_up) {
+ if (baud <= min)
+ tty_termios_encode_baud_rate(termios,
+ min + 1, min + 1);
+ else
+ tty_termios_encode_baud_rate(termios,
+ max - 1, max - 1);
+ }
}
-
+ /* Should never happen */
+ WARN_ON(1);
return 0;
}
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* we're going to avoid suspending serial console */
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
mutex_unlock(&port->mutex);
return 0;
}
- uport->suspended = 1;
+ if (console_suspend_enabled || !uart_console(uport))
+ uport->suspended = 1;
if (port->flags & ASYNC_INITIALIZED) {
const struct uart_ops *ops = uport->ops;
int tries;
- set_bit(ASYNCB_SUSPENDED, &port->flags);
- clear_bit(ASYNCB_INITIALIZED, &port->flags);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
- spin_lock_irq(&uport->lock);
- ops->stop_tx(uport);
- ops->set_mctrl(uport, 0);
- ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
/*
* Wait for the transmitter to empty.
drv->dev_name,
drv->tty_driver->name_base + uport->line);
- ops->shutdown(uport);
+ if (console_suspend_enabled || !uart_console(uport))
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (uart_console(uport))
+ if (console_suspend_enabled && uart_console(uport))
console_stop(uport->cons);
- uart_change_pm(state, 3);
+ if (console_suspend_enabled || !uart_console(uport))
+ uart_change_pm(state, 3);
mutex_unlock(&port->mutex);
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* no need to resume serial console, it wasn't suspended */
- /*
- * First try to use the console cflag setting.
- */
- memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = uport->cons->cflag;
- /*
- * If that's unset, use the tty termios setting.
- */
- if (termios.c_cflag == 0)
- termios = *state->port.tty->termios;
- else {
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_input_baud_rate(&termios);
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_baud_rate(&termios);
- }
- uport->ops->set_termios(uport, &termios, NULL);
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(uport->irq);
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
- ret = ops->startup(uport);
- if (ret == 0) {
- uart_change_speed(state, NULL);
- spin_lock_irq(&uport->lock);
- ops->set_mctrl(uport, uport->mctrl);
- ops->start_tx(uport);
- spin_unlock_irq(&uport->lock);
- set_bit(ASYNCB_INITIALIZED, &port->flags);
- } else {
- /*
- * Failed to resume - maybe hardware went away?
- * Clear the "initialized" flag so we won't try
- * to call the low level drivers shutdown method.
- */
- uart_shutdown(state);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ ret = ops->startup(uport);
+ if (ret == 0) {
+ uart_change_speed(state, NULL);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
+ } else {
+ /*
+ * Failed to resume - maybe hardware went away?
+ * Clear the "initialized" flag so we won't try
+ * to call the low level drivers shutdown method.
+ */
+ uart_shutdown(state);
+ }
}
clear_bit(ASYNCB_SUSPENDED, &port->flags);
{
struct serial_info *info = link->priv;
- outb(12, info->c950ctrl + 1);
+ if (info->c950ctrl)
+ outb(12, info->c950ctrl + 1);
}
/* request_region? oxsemi branch does no request_region too... */
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
{
struct usb_interface *intf = to_usb_interface(dev);
struct asus_oled_dev *odev = usb_get_intfdata(intf);
- int temp = strict_strtoul(buf, 10, NULL);
+ unsigned long value;
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
- enable_oled(odev, temp);
+ enable_oled(odev, value);
return count;
}
{
struct asus_oled_dev *odev =
(struct asus_oled_dev *) dev_get_drvdata(device);
+ unsigned long value;
- int temp = strict_strtoul(buf, 10, NULL);
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
- enable_oled(odev, temp);
+ enable_oled(odev, value);
return count;
}
* 9-0: pr ndes
*/
-#define ET_DMA10_MASK 0x3FF /* 10 bit mask for DMA10W types */
-#define ET_DMA10_WRAP 0x400
-#define ET_DMA4_MASK 0x00F /* 4 bit mask for DMA4W types */
-#define ET_DMA4_WRAP 0x010
-
+#define ET_DMA12_MASK 0x0FFF /* 12 bit mask for DMA12W types */
+#define ET_DMA12_WRAP 0x1000
+#define ET_DMA10_MASK 0x03FF /* 10 bit mask for DMA10W types */
+#define ET_DMA10_WRAP 0x0400
+#define ET_DMA4_MASK 0x000F /* 4 bit mask for DMA4W types */
+#define ET_DMA4_WRAP 0x0010
+
+#define INDEX12(x) ((x) & ET_DMA12_MASK)
#define INDEX10(x) ((x) & ET_DMA10_MASK)
#define INDEX4(x) ((x) & ET_DMA4_MASK)
*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
}
+extern inline void add_12bit(u32 *v, int n)
+{
+ *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
+}
+
/*
* 10bit DMA with wrap
* txdma tx queue write address reg in txdma address map at 0x1010
/* Indicate that we have used this PSR entry. */
/* FIXME wrap 12 */
- rx_local->local_psr_full = (rx_local->local_psr_full + 1) & 0xFFF;
- if (rx_local->local_psr_full > rx_local->PsrNumEntries - 1) {
+ add_12bit(&rx_local->local_psr_full, 1);
+ if ((rx_local->local_psr_full & 0xFFF) > rx_local->PsrNumEntries - 1) {
/* Clear psr full and toggle the wrap bit */
- rx_local->local_psr_full &= 0xFFF;
+ rx_local->local_psr_full &= ~0xFFF;
rx_local->local_psr_full ^= 0x1000;
}
* retrieve the initialized message and event pages. Otherwise, we create and
* initialize the message and event pages.
*/
-int HvSynicInit(u32 irqVector)
+void HvSynicInit(void *irqarg)
{
u64 version;
union hv_synic_simp simp;
union hv_synic_sint sharedSint;
union hv_synic_scontrol sctrl;
u64 guestID;
- int ret = 0;
+ u32 irqVector = *((u32 *)(irqarg));
+ int cpu = smp_processor_id();
DPRINT_ENTER(VMBUS);
if (!gHvContext.HypercallPage) {
DPRINT_EXIT(VMBUS);
- return ret;
+ return;
}
/* Check the version */
*/
rdmsrl(HV_X64_MSR_GUEST_OS_ID, guestID);
if (guestID == HV_LINUX_GUEST_ID) {
- gHvContext.synICMessagePage[0] =
+ gHvContext.synICMessagePage[cpu] =
phys_to_virt(simp.BaseSimpGpa << PAGE_SHIFT);
- gHvContext.synICEventPage[0] =
+ gHvContext.synICEventPage[cpu] =
phys_to_virt(siefp.BaseSiefpGpa << PAGE_SHIFT);
} else {
DPRINT_ERR(VMBUS, "unknown guest id!!");
goto Cleanup;
}
DPRINT_DBG(VMBUS, "MAPPED: Simp: %p, Sifep: %p",
- gHvContext.synICMessagePage[0],
- gHvContext.synICEventPage[0]);
+ gHvContext.synICMessagePage[cpu],
+ gHvContext.synICEventPage[cpu]);
} else {
- gHvContext.synICMessagePage[0] = osd_PageAlloc(1);
- if (gHvContext.synICMessagePage[0] == NULL) {
+ gHvContext.synICMessagePage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+ if (gHvContext.synICMessagePage[cpu] == NULL) {
DPRINT_ERR(VMBUS,
"unable to allocate SYNIC message page!!");
goto Cleanup;
}
- gHvContext.synICEventPage[0] = osd_PageAlloc(1);
- if (gHvContext.synICEventPage[0] == NULL) {
+ gHvContext.synICEventPage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+ if (gHvContext.synICEventPage[cpu] == NULL) {
DPRINT_ERR(VMBUS,
"unable to allocate SYNIC event page!!");
goto Cleanup;
/* Setup the Synic's message page */
rdmsrl(HV_X64_MSR_SIMP, simp.AsUINT64);
simp.SimpEnabled = 1;
- simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[0])
+ simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[cpu])
>> PAGE_SHIFT;
DPRINT_DBG(VMBUS, "HV_X64_MSR_SIMP msr set to: %llx",
/* Setup the Synic's event page */
rdmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
siefp.SiefpEnabled = 1;
- siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[0])
+ siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[cpu])
>> PAGE_SHIFT;
DPRINT_DBG(VMBUS, "HV_X64_MSR_SIEFP msr set to: %llx",
DPRINT_EXIT(VMBUS);
- return ret;
+ return;
Cleanup:
- ret = -1;
-
if (gHvContext.GuestId == HV_LINUX_GUEST_ID) {
- if (gHvContext.synICEventPage[0])
- osd_PageFree(gHvContext.synICEventPage[0], 1);
+ if (gHvContext.synICEventPage[cpu])
+ osd_PageFree(gHvContext.synICEventPage[cpu], 1);
- if (gHvContext.synICMessagePage[0])
- osd_PageFree(gHvContext.synICMessagePage[0], 1);
+ if (gHvContext.synICMessagePage[cpu])
+ osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
}
DPRINT_EXIT(VMBUS);
-
- return ret;
+ return;
}
/**
* HvSynicCleanup - Cleanup routine for HvSynicInit().
*/
-void HvSynicCleanup(void)
+void HvSynicCleanup(void *arg)
{
union hv_synic_sint sharedSint;
union hv_synic_simp simp;
union hv_synic_siefp siefp;
+ int cpu = smp_processor_id();
DPRINT_ENTER(VMBUS);
sharedSint.Masked = 1;
+ /* Need to correctly cleanup in the case of SMP!!! */
/* Disable the interrupt */
wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64);
wrmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
- osd_PageFree(gHvContext.synICMessagePage[0], 1);
- osd_PageFree(gHvContext.synICEventPage[0], 1);
+ osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
+ osd_PageFree(gHvContext.synICEventPage[cpu], 1);
}
DPRINT_EXIT(VMBUS);
},
};
-#define MAX_NUM_CPUS 1
+#define MAX_NUM_CPUS 32
struct hv_input_signal_event_buffer {
extern u16 HvSignalEvent(void);
-extern int HvSynicInit(u32 irqVector);
+extern void HvSynicInit(void *irqarg);
-extern void HvSynicCleanup(void);
+extern void HvSynicCleanup(void *arg);
#endif /* __HV_H__ */
/* strcpy(dev->name, "vmbus"); */
/* SynIC setup... */
- ret = HvSynicInit(*irqvector);
+ on_each_cpu(HvSynicInit, (void *)irqvector, 1);
/* Connect to VMBus in the root partition */
ret = VmbusConnect();
DPRINT_ENTER(VMBUS);
VmbusChannelReleaseUnattachedChannels();
VmbusDisconnect();
- HvSynicCleanup();
+ on_each_cpu(HvSynicCleanup, NULL, 1);
DPRINT_EXIT(VMBUS);
return ret;
*/
static void VmbusOnMsgDPC(struct hv_driver *drv)
{
- void *page_addr = gHvContext.synICMessagePage[0];
+ int cpu = smp_processor_id();
+ void *page_addr = gHvContext.synICMessagePage[cpu];
struct hv_message *msg = (struct hv_message *)page_addr +
VMBUS_MESSAGE_SINT;
struct hv_message *copied;
static int VmbusOnISR(struct hv_driver *drv)
{
int ret = 0;
+ int cpu = smp_processor_id();
void *page_addr;
struct hv_message *msg;
union hv_synic_event_flags *event;
- page_addr = gHvContext.synICMessagePage[0];
+ page_addr = gHvContext.synICMessagePage[cpu];
msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT;
DPRINT_ENTER(VMBUS);
}
/* TODO: Check if there are events to be process */
- page_addr = gHvContext.synICEventPage[0];
+ page_addr = gHvContext.synICEventPage[cpu];
event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT;
/* Since we are a child, we only need to check bit 0 */
return 0;
/* allocate 2^1 pages = 8K (on i386);
* should be more than enough for one device */
- pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+ pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
if (!pages_start)
return -ENOMEM;
}
}
if (cur_alt && new_alt) {
+ struct usb_interface *iface = usb_ifnum_to_if(udev,
+ cur_alt->desc.bInterfaceNumber);
+
+ if (iface->resetting_device) {
+ /*
+ * The USB core just reset the device, so the xHCI host
+ * and the device will think alt setting 0 is installed.
+ * However, the USB core will pass in the alternate
+ * setting installed before the reset as cur_alt. Dig
+ * out the alternate setting 0 structure, or the first
+ * alternate setting if a broken device doesn't have alt
+ * setting 0.
+ */
+ cur_alt = usb_altnum_to_altsetting(iface, 0);
+ if (!cur_alt)
+ cur_alt = &iface->altsetting[0];
+ }
+
/* Drop all the endpoints in the current alt setting */
for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->drop_endpoint(hcd, udev,
USB_PORT_FEAT_C_SUSPEND);
udev = hdev->children[i-1];
if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
usb_lock_device(udev);
ret = remote_wakeup(hdev->
children[i-1]);
usb_enable_interface(udev, intf, true);
ret = 0;
} else {
- /* We've just reset the device, so it will think alt
- * setting 0 is installed. For usb_set_interface() to
- * work properly, we need to set the current alternate
- * interface setting to 0 (or the first alt setting, if
- * the device doesn't have alt setting 0).
+ /* Let the bandwidth allocation function know that this
+ * device has been reset, and it will have to use
+ * alternate setting 0 as the current alternate setting.
*/
- intf->cur_altsetting =
- usb_find_alt_setting(config, i, 0);
- if (!intf->cur_altsetting)
- intf->cur_altsetting =
- &config->intf_cache[i]->altsetting[0];
+ intf->resetting_device = 1;
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
+ intf->resetting_device = 0;
}
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
if (index <= 0)
return NULL;
- buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
if (buf) {
len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
- smallbuf = kmalloc(++len, GFP_KERNEL);
+ smallbuf = kmalloc(++len, GFP_NOIO);
if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
case USB_SPEED_HIGH:
speed = "480";
break;
+ case USB_SPEED_VARIABLE:
+ speed = "480";
+ break;
+ case USB_SPEED_SUPER:
+ speed = "5000";
+ break;
default:
speed = "unknown";
}
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
- * stop that signaling.
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
*/
- ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
del_timer_sync(&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
- port = HCS_N_PORTS (ehci->hcs_params);
spin_lock_irq (&ehci->lock);
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (ehci->reset_done[port] != 0) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because "
+ "port %d is resuming\n",
+ port + 1);
+ return -EBUSY;
+ }
+ }
+ }
+
/* stop schedules, clean any completed work */
if (HC_IS_RUNNING(hcd->state)) {
ehci_quiesce (ehci);
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
* But interval 1 scheduling is simpler, and
* includes high bandwidth.
*/
- dbg ("intr period %d uframes, NYET!",
- urb->interval);
- goto done;
+ urb->interval = 1;
+ } else if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period << 3;
}
} else {
int think_time;
usb_calc_bus_time (urb->dev->speed,
is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
+ if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period;
+ }
}
}
static void fhci_usb_free(void *lld)
{
struct fhci_usb *usb = lld;
- struct fhci_hcd *fhci = usb->fhci;
+ struct fhci_hcd *fhci;
if (usb) {
+ fhci = usb->fhci;
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
fhci_ep0_free(usb);
kfree(usb->actual_frame);
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
void __iomem *data_reg;
int irq;
int retval = 0;
+ struct resource *irq_res;
+ unsigned int irq_flags = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized this the three resources and probably board
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!addr || !data || !irq_res) {
retval = -ENODEV;
goto err1;
}
+ irq = irq_res->start;
#ifdef CONFIG_USB_HCD_DMA
if (pdev->dev.dma_mask) {
}
#endif
-#ifdef CONFIG_ARM
- if (isp1362_hcd->board)
- set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+ irq_flags |= IRQF_TRIGGER_RISING;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+ irq_flags |= IRQF_TRIGGER_LOW;
- retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
u32 buffstatus;
- /* XXX
+ /*
* NAKs are handled in HW by the chip. Usually if the
* device is not able to send data fast enough.
- * This did not trigger for a long time now.
+ * This happens mostly on slower hardware.
*/
- printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
"%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- else if (!uhci->dead)
+ else if (uhci->dead)
+ ; /* Dead controllers tell no tales */
+
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ else if (hcd->self.root_hub->do_remote_wakeup &&
+ uhci->resuming_ports) {
+ dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+ "is resuming\n");
+ rc = -EBUSY;
+ } else
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
return rc;
/* Port received a wakeup request */
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
- msecs_to_jiffies(20);
+ msecs_to_jiffies(25);
/* Make sure we see the port again
* after the resuming period is over. */
dbg("%s - port %d", __func__, port->number);
- if (serial->type->max_in_flight_urbs) {
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs)
chars = port->tx_bytes_flight;
- spin_unlock_irqrestore(&port->lock, flags);
- } else if (serial->num_bulk_out)
+ else if (serial->num_bulk_out)
chars = kfifo_len(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, chars);
return chars;
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->max_in_flight_urbs) {
+ kfree(urb->transfer_buffer);
+
spin_lock_irqsave(&port->lock, flags);
--port->urbs_in_flight;
port->tx_bytes_flight -= urb->transfer_buffer_length;
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
unsigned f = 0;
- unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+ US_FL_FIX_CAPACITY |
US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
tristate "Compulab SBC-FITPC2 watchdog"
depends on X86
---help---
- This is the driver for the built-in watchdog timer on the fit-PC2
- Single-board computer made by Compulab.
+ This is the driver for the built-in watchdog timer on the fit-PC2,
+ fit-PC2i, CM-iAM single-board computers made by Compulab.
It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
+#include <linux/timer.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
static void wdt_send_data(unsigned char command, unsigned char data)
{
outb(command, COMMAND_PORT);
- mdelay(100);
+ msleep(100);
outb(data, DATA_PORT);
- mdelay(200);
+ msleep(200);
}
static void wdt_enable(void)
{
int err;
- if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
- pr_info("board name is: %s. Should be SBC-FITPC2\n",
- dmi_get_system_info(DMI_BOARD_NAME));
+ if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
return -ENODEV;
- }
+
+ pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s);
- v9fs_dentry_release(s->s_root); /* clunk root */
+ if (s->s_root)
+ v9fs_dentry_release(s->s_root); /* clunk root */
kill_anon_super(s);
u32 s_last_bmap;
struct buffer_head *s_bmap_bh;
char *s_prefix; /* Prefix for volumes and assigns. */
- int s_prefix_len; /* Length of prefix. */
char s_volume[32]; /* Volume prefix for absolute symlinks. */
+ spinlock_t symlink_lock; /* protects the previous two */
};
#define SF_INTL 0x0001 /* International filesystem. */
p = (char *)AFFS_HEAD(bh)->table;
lc = '/';
if (*symname == '/') {
+ struct affs_sb_info *sbi = AFFS_SB(sb);
while (*symname == '/')
symname++;
- while (AFFS_SB(sb)->s_volume[i]) /* Cannot overflow */
- *p++ = AFFS_SB(sb)->s_volume[i++];
+ spin_lock(&sbi->symlink_lock);
+ while (sbi->s_volume[i]) /* Cannot overflow */
+ *p++ = sbi->s_volume[i++];
+ spin_unlock(&sbi->symlink_lock);
}
while (i < maxlen && (c = *symname++)) {
if (c == '.' && lc == '/' && *symname == '.' && symname[1] == '/') {
switch (token) {
case Opt_bs:
if (match_int(&args[0], &n))
- return -EINVAL;
+ return 0;
if (n != 512 && n != 1024 && n != 2048
&& n != 4096) {
printk ("AFFS: Invalid blocksize (512, 1024, 2048, 4096 allowed)\n");
break;
case Opt_mode:
if (match_octal(&args[0], &option))
- return 1;
+ return 0;
*mode = option & 0777;
*mount_opts |= SF_SETMODE;
break;
*mount_opts |= SF_MUFS;
break;
case Opt_prefix:
- /* Free any previous prefix */
- kfree(*prefix);
*prefix = match_strdup(&args[0]);
if (!*prefix)
return 0;
break;
case Opt_reserved:
if (match_int(&args[0], reserved))
- return 1;
+ return 0;
break;
case Opt_root:
if (match_int(&args[0], root))
- return 1;
+ return 0;
break;
case Opt_setgid:
if (match_int(&args[0], &option))
- return 1;
+ return 0;
*gid = option;
*mount_opts |= SF_SETGID;
break;
case Opt_setuid:
if (match_int(&args[0], &option))
- return -EINVAL;
+ return 0;
*uid = option;
*mount_opts |= SF_SETUID;
break;
return -ENOMEM;
sb->s_fs_info = sbi;
mutex_init(&sbi->s_bmlock);
+ spin_lock_init(&sbi->symlink_lock);
if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
&blocksize,&sbi->s_prefix,
sbi->s_volume, &mount_flags)) {
printk(KERN_ERR "AFFS: Error parsing options\n");
+ kfree(sbi->s_prefix);
+ kfree(sbi);
return -EINVAL;
}
/* N.B. after this point s_prefix must be released */
unsigned long mount_flags;
int res = 0;
char *new_opts = kstrdup(data, GFP_KERNEL);
+ char volume[32];
+ char *prefix = NULL;
pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data);
*flags |= MS_NODIRATIME;
+ memcpy(volume, sbi->s_volume, 32);
if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block,
- &blocksize, &sbi->s_prefix, sbi->s_volume,
+ &blocksize, &prefix, volume,
&mount_flags)) {
+ kfree(prefix);
kfree(new_opts);
return -EINVAL;
}
sbi->s_mode = mode;
sbi->s_uid = uid;
sbi->s_gid = gid;
+ /* protect against readers */
+ spin_lock(&sbi->symlink_lock);
+ if (prefix) {
+ kfree(sbi->s_prefix);
+ sbi->s_prefix = prefix;
+ }
+ memcpy(sbi->s_volume, volume, 32);
+ spin_unlock(&sbi->symlink_lock);
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
unlock_kernel();
int i, j;
char c;
char lc;
- char *pf;
pr_debug("AFFS: follow_link(ino=%lu)\n",inode->i_ino);
j = 0;
lf = (struct slink_front *)bh->b_data;
lc = 0;
- pf = AFFS_SB(inode->i_sb)->s_prefix ? AFFS_SB(inode->i_sb)->s_prefix : "/";
if (strchr(lf->symname,':')) { /* Handle assign or volume name */
+ struct affs_sb_info *sbi = AFFS_SB(inode->i_sb);
+ char *pf;
+ spin_lock(&sbi->symlink_lock);
+ pf = sbi->s_prefix ? sbi->s_prefix : "/";
while (i < 1023 && (c = pf[i]))
link[i++] = c;
+ spin_unlock(&sbi->symlink_lock);
while (i < 1023 && lf->symname[j] != ':')
link[i++] = lf->symname[j++];
if (i < 1023)
struct inode *inode;
unsigned i, imap_len;
struct bfs_sb_info *info;
- long ret = -EINVAL;
+ int ret = -EINVAL;
unsigned long i_sblock, i_eblock, i_eoff, s_size;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
+ mutex_init(&info->bfs_lock);
s->s_fs_info = info;
sb_set_blocksize(s, BFS_BSIZE);
- bh = sb_bread(s, 0);
- if(!bh)
+ info->si_sbh = sb_bread(s, 0);
+ if (!info->si_sbh)
goto out;
- bfs_sb = (struct bfs_super_block *)bh->b_data;
+ bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data;
if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) {
if (!silent)
printf("No BFS filesystem on %s (magic=%08x)\n",
s->s_id, le32_to_cpu(bfs_sb->s_magic));
- goto out;
+ goto out1;
}
if (BFS_UNCLEAN(bfs_sb, s) && !silent)
printf("%s is unclean, continuing\n", s->s_id);
s->s_magic = BFS_MAGIC;
- info->si_sbh = bh;
if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
printf("Superblock is corrupted\n");
- goto out;
+ goto out1;
}
info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) /
imap_len = (info->si_lasti / 8) + 1;
info->si_imap = kzalloc(imap_len, GFP_KERNEL);
if (!info->si_imap)
- goto out;
+ goto out1;
for (i = 0; i < BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
inode = bfs_iget(s, BFS_ROOT_INO);
if (IS_ERR(inode)) {
ret = PTR_ERR(inode);
- kfree(info->si_imap);
- goto out;
+ goto out2;
}
s->s_root = d_alloc_root(inode);
if (!s->s_root) {
iput(inode);
ret = -ENOMEM;
- kfree(info->si_imap);
- goto out;
+ goto out2;
}
info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS;
bh = sb_bread(s, info->si_blocks - 1);
if (!bh) {
printf("Last block not available: %lu\n", info->si_blocks - 1);
- iput(inode);
ret = -EIO;
- kfree(info->si_imap);
- goto out;
+ goto out3;
}
brelse(bh);
printf("Inode 0x%08x corrupted\n", i);
brelse(bh);
- s->s_root = NULL;
- kfree(info->si_imap);
- kfree(info);
- s->s_fs_info = NULL;
- return -EIO;
+ ret = -EIO;
+ goto out3;
}
if (!di->i_ino) {
s->s_dirt = 1;
}
dump_imap("read_super", s);
- mutex_init(&info->bfs_lock);
return 0;
+out3:
+ dput(s->s_root);
+ s->s_root = NULL;
+out2:
+ kfree(info->si_imap);
+out1:
+ brelse(info->si_sbh);
out:
- brelse(bh);
+ mutex_destroy(&info->bfs_lock);
kfree(info);
s->s_fs_info = NULL;
return ret;
#else
set_personality(PER_LINUX);
#endif
+ setup_new_exec(bprm);
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0')
goto out_free_interp;
- /*
- * The early SET_PERSONALITY here is so that the lookup
- * for the interpreter happens in the namespace of the
- * to-be-execed image. SET_PERSONALITY can select an
- * alternate root.
- *
- * However, SET_PERSONALITY is NOT allowed to switch
- * this task into the new images's memory mapping
- * policy - that is, TASK_SIZE must still evaluate to
- * that which is appropriate to the execing application.
- * This is because exit_mmap() needs to have TASK_SIZE
- * evaluate to the size of the old image.
- *
- * So if (say) a 64-bit application is execing a 32-bit
- * application it is the architecture's responsibility
- * to defer changing the value of TASK_SIZE until the
- * switch really is going to happen - do this in
- * flush_thread(). - akpm
- */
- SET_PERSONALITY(loc->elf_ex);
-
interpreter = open_exec(elf_interpreter);
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter))
/* Verify the interpreter has a valid arch */
if (!elf_check_arch(&loc->interp_elf_ex))
goto out_free_dentry;
- } else {
- /* Executables without an interpreter also need a personality */
- SET_PERSONALITY(loc->elf_ex);
}
/* Flush all traces of the currently running executable */
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
current->flags |= PF_RANDOMIZE;
- arch_pick_mmap_layout(current->mm);
+
+ setup_new_exec(bprm);
/* Do this so that we can load the interpreter, if need be. We will
change some of these later */
set_personality(PER_LINUX_FDPIC);
if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
current->personality |= READ_IMPLIES_EXEC;
+
+ setup_new_exec(bprm);
+
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
/* OK, This is the point of no return */
set_personality(PER_LINUX_32BIT);
+ setup_new_exec(bprm);
}
/*
/* OK, This is the point of no return */
current->flags &= ~PF_FORKNOEXEC;
current->personality = PER_HPUX;
+ setup_new_exec(bprm);
/* Set the task size for HP-UX processes such that
* the gateway page is outside the address space.
i = 0;
while (i < bio_slab_nr) {
- struct bio_slab *bslab = &bio_slabs[i];
+ bslab = &bio_slabs[i];
if (!bslab->slab && entry == -1)
entry = i;
switch (type) {
case ACL_TYPE_ACCESS:
mode = inode->i_mode;
- ret = posix_acl_equiv_mode(acl, &mode);
- if (ret < 0)
- return ret;
- ret = 0;
- inode->i_mode = mode;
name = POSIX_ACL_XATTR_ACCESS;
+ if (acl) {
+ ret = posix_acl_equiv_mode(acl, &mode);
+ if (ret < 0)
+ return ret;
+ inode->i_mode = mode;
+ }
+ ret = 0;
break;
case ACL_TYPE_DEFAULT:
if (!S_ISDIR(inode->i_mode))
ACL_TYPE_ACCESS);
}
}
+ posix_acl_release(clone);
}
failed:
posix_acl_release(acl);
#define BTRFS_MOUNT_SSD_SPREAD (1 << 8)
#define BTRFS_MOUNT_NOSSD (1 << 9)
#define BTRFS_MOUNT_DISCARD (1 << 10)
+#define BTRFS_MOUNT_FORCE_COMPRESS (1 << 11)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
if (!fs_info->fs_root)
goto fail_trans_kthread;
+ if (!(sb->s_flags & MS_RDONLY)) {
+ down_read(&fs_info->cleanup_work_sem);
+ btrfs_orphan_cleanup(fs_info->fs_root);
+ up_read(&fs_info->cleanup_work_sem);
+ }
+
return tree_root;
fail_trans_kthread:
return (cache->flags & bits) == bits;
}
+void btrfs_get_block_group(struct btrfs_block_group_cache *cache)
+{
+ atomic_inc(&cache->count);
+}
+
+void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
+{
+ if (atomic_dec_and_test(&cache->count))
+ kfree(cache);
+}
+
/*
* this adds the block group to the fs_info rb tree for the block group
* cache
}
}
if (ret)
- atomic_inc(&ret->count);
+ btrfs_get_block_group(ret);
spin_unlock(&info->block_group_cache_lock);
return ret;
put_caching_control(caching_ctl);
atomic_dec(&block_group->space_info->caching_threads);
+ btrfs_put_block_group(block_group);
+
return 0;
}
up_write(&fs_info->extent_commit_sem);
atomic_inc(&cache->space_info->caching_threads);
+ btrfs_get_block_group(cache);
tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
cache->key.objectid);
return cache;
}
-void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
-{
- if (atomic_dec_and_test(&cache->count))
- kfree(cache);
-}
-
static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info,
u64 flags)
{
if (node) {
cache = rb_entry(node, struct btrfs_block_group_cache,
cache_node);
- atomic_inc(&cache->count);
+ btrfs_get_block_group(cache);
} else
cache = NULL;
spin_unlock(&root->fs_info->block_group_cache_lock);
u64 offset;
int cached;
- atomic_inc(&block_group->count);
+ btrfs_get_block_group(block_group);
search_start = block_group->key.objectid;
have_block_group:
btrfs_put_block_group(block_group);
block_group = last_ptr->block_group;
- atomic_inc(&block_group->count);
+ btrfs_get_block_group(block_group);
spin_unlock(&last_ptr->lock);
spin_unlock(&last_ptr->refill_lock);
wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
-
- WARN_ON(atomic_read(&block_group->count) != 1);
- kfree(block_group);
+ btrfs_put_block_group(block_group);
spin_lock(&info->block_group_cache_lock);
}
return NULL;
}
-/*
- * look for an offset in the tree, and if it can't be found, return
- * the first offset we can find smaller than 'offset'.
- */
-static inline struct rb_node *tree_search(struct rb_root *root, u64 offset)
-{
- struct rb_node *prev;
- struct rb_node *ret;
- ret = __tree_search(root, offset, &prev, NULL);
- if (!ret)
- return prev;
- return ret;
-}
-
/* check to see if two extent_map structs are adjacent and safe to merge */
static int mergable_maps(struct extent_map *prev, struct extent_map *next)
{
}
static int extent_mergeable(struct extent_buffer *leaf, int slot,
- u64 objectid, u64 bytenr, u64 *start, u64 *end)
+ u64 objectid, u64 bytenr, u64 orig_offset,
+ u64 *start, u64 *end)
{
struct btrfs_file_extent_item *fi;
struct btrfs_key key;
fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG ||
btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr ||
+ btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset ||
btrfs_file_extent_compression(leaf, fi) ||
btrfs_file_extent_encryption(leaf, fi) ||
btrfs_file_extent_other_encoding(leaf, fi))
u64 split;
int del_nr = 0;
int del_slot = 0;
+ int recow;
int ret;
btrfs_drop_extent_cache(inode, start, end - 1, 0);
path = btrfs_alloc_path();
BUG_ON(!path);
again:
+ recow = 0;
split = start;
key.objectid = inode->i_ino;
key.type = BTRFS_EXTENT_DATA_KEY;
bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
+ memcpy(&new_key, &key, sizeof(new_key));
+
+ if (start == key.offset && end < extent_end) {
+ other_start = 0;
+ other_end = start;
+ if (extent_mergeable(leaf, path->slots[0] - 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ new_key.offset = end;
+ btrfs_set_item_key_safe(trans, root, path, &new_key);
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ extent_end - end);
+ btrfs_set_file_extent_offset(leaf, fi,
+ end - orig_offset);
+ fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ end - other_start);
+ btrfs_mark_buffer_dirty(leaf);
+ goto out;
+ }
+ }
+
+ if (start > key.offset && end == extent_end) {
+ other_start = end;
+ other_end = 0;
+ if (extent_mergeable(leaf, path->slots[0] + 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ start - key.offset);
+ path->slots[0]++;
+ new_key.offset = start;
+ btrfs_set_item_key_safe(trans, root, path, &new_key);
+
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ other_end - start);
+ btrfs_set_file_extent_offset(leaf, fi,
+ start - orig_offset);
+ btrfs_mark_buffer_dirty(leaf);
+ goto out;
+ }
+ }
while (start > key.offset || end < extent_end) {
if (key.offset == start)
split = end;
- memcpy(&new_key, &key, sizeof(new_key));
new_key.offset = split;
ret = btrfs_duplicate_item(trans, root, path, &new_key);
if (ret == -EAGAIN) {
path->slots[0]--;
extent_end = end;
}
+ recow = 1;
}
- fi = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_file_extent_item);
-
other_start = end;
other_end = 0;
- if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino,
- bytenr, &other_start, &other_end)) {
+ if (extent_mergeable(leaf, path->slots[0] + 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ if (recow) {
+ btrfs_release_path(root, path);
+ goto again;
+ }
extent_end = other_end;
del_slot = path->slots[0] + 1;
del_nr++;
}
other_start = 0;
other_end = start;
- if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino,
- bytenr, &other_start, &other_end)) {
+ if (extent_mergeable(leaf, path->slots[0] - 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ if (recow) {
+ btrfs_release_path(root, path);
+ goto again;
+ }
key.offset = other_start;
del_slot = path->slots[0];
del_nr++;
inode->i_ino, orig_offset);
BUG_ON(ret);
}
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
if (del_nr == 0) {
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_mark_buffer_dirty(leaf);
- goto out;
- }
-
- fi = btrfs_item_ptr(leaf, del_slot - 1,
- struct btrfs_file_extent_item);
- btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG);
- btrfs_set_file_extent_num_bytes(leaf, fi,
- extent_end - key.offset);
- btrfs_mark_buffer_dirty(leaf);
+ } else {
+ btrfs_set_file_extent_type(leaf, fi,
+ BTRFS_FILE_EXTENT_REG);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ extent_end - key.offset);
+ btrfs_mark_buffer_dirty(leaf);
- ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
- BUG_ON(ret);
+ ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
+ BUG_ON(ret);
+ }
out:
btrfs_free_path(path);
return 0;
nr_pages_ret = 0;
/* flag the file so we don't compress in the future */
- BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+ if (!btrfs_test_opt(root, FORCE_COMPRESS))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
}
if (will_compress) {
*num_added += 1;
/* Reached end of directory/root. Bump pos past the last item. */
if (key_type == BTRFS_DIR_INDEX_KEY)
- filp->f_pos = INT_LIMIT(off_t);
+ /*
+ * 32-bit glibc will use getdents64, but then strtol -
+ * so the last number we can serve is this.
+ */
+ filp->f_pos = 0x7fffffff;
else
filp->f_pos++;
nopos:
}
static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode)
+ u64 alloc_hint, int mode, loff_t actual_len)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 cur_offset = start;
u64 num_bytes = end - start;
int ret = 0;
+ u64 i_size;
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
cur_offset > inode->i_size) {
- i_size_write(inode, cur_offset);
- btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+ if (cur_offset > actual_len)
+ i_size = actual_len;
+ else
+ i_size = cur_offset;
+ i_size_write(inode, i_size);
+ btrfs_ordered_update_i_size(inode, i_size, NULL);
}
ret = btrfs_update_inode(trans, root, inode);
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
ret = prealloc_file_range(inode,
cur_offset, last_byte,
- alloc_hint, mode);
+ alloc_hint, mode, offset+len);
if (ret < 0) {
free_extent_map(em);
break;
if (ordered)
offset = entry_end(ordered);
+ else
+ offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize);
mutex_lock(&tree->mutex);
disk_i_size = BTRFS_I(inode)->disk_i_size;
return -ENOMEM;
path = btrfs_alloc_path();
- if (!path)
+ if (!path) {
+ kfree(cluster);
return -ENOMEM;
+ }
rc->extents_found = 0;
rc->extents_skipped = 0;
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
- Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
+ Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
+ Opt_flushoncommit,
Opt_discard, Opt_err,
};
{Opt_alloc_start, "alloc_start=%s"},
{Opt_thread_pool, "thread_pool=%d"},
{Opt_compress, "compress"},
+ {Opt_compress_force, "compress-force"},
{Opt_ssd, "ssd"},
{Opt_ssd_spread, "ssd_spread"},
{Opt_nossd, "nossd"},
printk(KERN_INFO "btrfs: use compression\n");
btrfs_set_opt(info->mount_opt, COMPRESS);
break;
+ case Opt_compress_force:
+ printk(KERN_INFO "btrfs: forcing compression\n");
+ btrfs_set_opt(info->mount_opt, FORCE_COMPRESS);
+ btrfs_set_opt(info->mount_opt, COMPRESS);
+ break;
case Opt_ssd:
printk(KERN_INFO "btrfs: use ssd allocation scheme\n");
btrfs_set_opt(info->mount_opt, SSD);
root->fs_info->avail_metadata_alloc_bits;
if ((all_avail & BTRFS_BLOCK_GROUP_RAID10) &&
- root->fs_info->fs_devices->rw_devices <= 4) {
+ root->fs_info->fs_devices->num_devices <= 4) {
printk(KERN_ERR "btrfs: unable to go below four devices "
"on raid10\n");
ret = -EINVAL;
}
if ((all_avail & BTRFS_BLOCK_GROUP_RAID1) &&
- root->fs_info->fs_devices->rw_devices <= 2) {
+ root->fs_info->fs_devices->num_devices <= 2) {
printk(KERN_ERR "btrfs: unable to go below two "
"devices on raid1\n");
ret = -EINVAL;
return -EINVAL;
bdev = open_bdev_exclusive(device_path, 0, root->fs_info->bdev_holder);
- if (!bdev)
- return -EIO;
+ if (IS_ERR(bdev))
+ return PTR_ERR(bdev);
if (root->fs_info->fs_devices->seeding) {
seeding_dev = 1;
if (!em)
return 1;
+ if (btrfs_test_opt(root, DEGRADED)) {
+ free_extent_map(em);
+ return 0;
+ }
+
map = (struct map_lookup *)em->bdev;
for (i = 0; i < map->num_stripes; i++) {
if (!map->stripes[i].dev->writeable) {
em = lookup_extent_mapping(em_tree, logical, *length);
read_unlock(&em_tree->lock);
- if (!em && unplug_page)
+ if (!em && unplug_page) {
+ kfree(multi);
return 0;
+ }
if (!em) {
printk(KERN_CRIT "unable to find logical %llu len %llu\n",
COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
#endif
+/* Big V (don't complain on serial console) */
+IGNORE_IOCTL(VT_OPENQRY)
+IGNORE_IOCTL(VT_GETMODE)
/* Little p (/dev/rtc, /dev/envctrl, etc.) */
COMPATIBLE_IOCTL(RTC_AIE_ON)
COMPATIBLE_IOCTL(RTC_AIE_OFF)
* block. A pointer to that is in the struct vfsmount that we
* have around.
*/
- if (!parent) {
- if (debugfs_mount && debugfs_mount->mnt_sb) {
- parent = debugfs_mount->mnt_sb->s_root;
- }
- }
- if (!parent) {
- pr_debug("debugfs: Ah! can not find a parent!\n");
- return -EFAULT;
- }
+ if (!parent)
+ parent = debugfs_mount->mnt_sb->s_root;
*dentry = NULL;
mutex_lock(&parent->d_inode->i_mutex);
char *cipher_name, size_t *key_size)
{
char dummy_key[ECRYPTFS_MAX_KEY_BYTES];
- char *full_alg_name;
+ char *full_alg_name = NULL;
int rc;
*key_tfm = NULL;
if (rc)
goto out;
*key_tfm = crypto_alloc_blkcipher(full_alg_name, 0, CRYPTO_ALG_ASYNC);
- kfree(full_alg_name);
if (IS_ERR(*key_tfm)) {
rc = PTR_ERR(*key_tfm);
printk(KERN_ERR "Unable to allocate crypto cipher with name "
goto out;
}
out:
+ kfree(full_alg_name);
return rc;
}
struct dentry *ecryptfs_dentry = file->f_path.dentry;
/* Private value of ecryptfs_dentry allocated in
* ecryptfs_lookup() */
- struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
+ struct dentry *lower_dentry;
struct ecryptfs_file_info *file_info;
mount_crypt_stat = &ecryptfs_superblock_to_private(
| ECRYPTFS_ENCRYPTED);
}
mutex_unlock(&crypt_stat->cs_mutex);
- if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
- && !(file->f_flags & O_RDONLY)) {
- rc = -EPERM;
- printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
- "file must hence be opened RO\n", __func__);
- goto out;
- }
if (!ecryptfs_inode_to_private(inode)->lower_file) {
rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
if (rc) {
goto out;
}
}
+ if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
+ && !(file->f_flags & O_RDONLY)) {
+ rc = -EPERM;
+ printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
+ "file must hence be opened RO\n", __func__);
+ goto out;
+ }
ecryptfs_set_file_lower(
file, ecryptfs_inode_to_private(inode)->lower_file);
if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
.ioctl = ecryptfs_ioctl,
- .mmap = generic_file_mmap,
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.release = ecryptfs_release,
goto out;
}
rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry,
- ecryptfs_dir_inode->i_sb, 1);
+ ecryptfs_dir_inode->i_sb,
+ ECRYPTFS_INTERPOSE_FLAG_D_ADD);
if (rc) {
printk(KERN_ERR "%s: Error interposing; rc = [%d]\n",
__func__, rc);
unlock_dir(lower_dir_dentry);
dput(lower_new_dentry);
dput(lower_old_dentry);
- d_drop(lower_old_dentry);
- d_drop(new_dentry);
- d_drop(old_dentry);
return rc;
}
struct dentry *lower_new_dentry;
struct dentry *lower_old_dir_dentry;
struct dentry *lower_new_dir_dentry;
+ struct dentry *trap = NULL;
lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
dget(lower_new_dentry);
lower_old_dir_dentry = dget_parent(lower_old_dentry);
lower_new_dir_dentry = dget_parent(lower_new_dentry);
- lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+ trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+ /* source should not be ancestor of target */
+ if (trap == lower_old_dentry) {
+ rc = -EINVAL;
+ goto out_lock;
+ }
+ /* target should not be ancestor of source */
+ if (trap == lower_new_dentry) {
+ rc = -ENOTEMPTY;
+ goto out_lock;
+ }
rc = vfs_rename(lower_old_dir_dentry->d_inode, lower_old_dentry,
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
}
/**
- * ecryptfs_truncate
+ * truncate_upper
* @dentry: The ecryptfs layer dentry
- * @new_length: The length to expand the file to
+ * @ia: Address of the ecryptfs inode's attributes
+ * @lower_ia: Address of the lower inode's attributes
*
* Function to handle truncations modifying the size of the file. Note
* that the file sizes are interpolated. When expanding, we are simply
- * writing strings of 0's out. When truncating, we need to modify the
- * underlying file size according to the page index interpolations.
+ * writing strings of 0's out. When truncating, we truncate the upper
+ * inode and update the lower_ia according to the page index
+ * interpolations. If ATTR_SIZE is set in lower_ia->ia_valid upon return,
+ * the caller must use lower_ia in a call to notify_change() to perform
+ * the truncation of the lower inode.
*
* Returns zero on success; non-zero otherwise
*/
-int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+static int truncate_upper(struct dentry *dentry, struct iattr *ia,
+ struct iattr *lower_ia)
{
int rc = 0;
struct inode *inode = dentry->d_inode;
loff_t lower_size_before_truncate;
loff_t lower_size_after_truncate;
- if (unlikely((new_length == i_size)))
+ if (unlikely((ia->ia_size == i_size))) {
+ lower_ia->ia_valid &= ~ATTR_SIZE;
goto out;
+ }
crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
/* Set up a fake ecryptfs file, this is used to interface with
* the file in the underlying filesystem so that the
&fake_ecryptfs_file,
ecryptfs_inode_to_private(dentry->d_inode)->lower_file);
/* Switch on growing or shrinking file */
- if (new_length > i_size) {
+ if (ia->ia_size > i_size) {
char zero[] = { 0x00 };
+ lower_ia->ia_valid &= ~ATTR_SIZE;
/* Write a single 0 at the last position of the file;
* this triggers code that will fill in 0's throughout
* the intermediate portion of the previous end of the
* file and the new and of the file */
rc = ecryptfs_write(&fake_ecryptfs_file, zero,
- (new_length - 1), 1);
- } else { /* new_length < i_size_read(inode) */
- /* We're chopping off all the pages down do the page
- * in which new_length is located. Fill in the end of
- * that page from (new_length & ~PAGE_CACHE_MASK) to
+ (ia->ia_size - 1), 1);
+ } else { /* ia->ia_size < i_size_read(inode) */
+ /* We're chopping off all the pages down to the page
+ * in which ia->ia_size is located. Fill in the end of
+ * that page from (ia->ia_size & ~PAGE_CACHE_MASK) to
* PAGE_CACHE_SIZE with zeros. */
size_t num_zeros = (PAGE_CACHE_SIZE
- - (new_length & ~PAGE_CACHE_MASK));
+ - (ia->ia_size & ~PAGE_CACHE_MASK));
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = vmtruncate(inode, new_length);
+ rc = vmtruncate(inode, ia->ia_size);
if (rc)
goto out_free;
- rc = vmtruncate(lower_dentry->d_inode, new_length);
+ lower_ia->ia_size = ia->ia_size;
+ lower_ia->ia_valid |= ATTR_SIZE;
goto out_free;
}
if (num_zeros) {
goto out_free;
}
rc = ecryptfs_write(&fake_ecryptfs_file, zeros_virt,
- new_length, num_zeros);
+ ia->ia_size, num_zeros);
kfree(zeros_virt);
if (rc) {
printk(KERN_ERR "Error attempting to zero out "
goto out_free;
}
}
- vmtruncate(inode, new_length);
+ vmtruncate(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
lower_size_before_truncate =
upper_size_to_lower_size(crypt_stat, i_size);
lower_size_after_truncate =
- upper_size_to_lower_size(crypt_stat, new_length);
- if (lower_size_after_truncate < lower_size_before_truncate)
- vmtruncate(lower_dentry->d_inode,
- lower_size_after_truncate);
+ upper_size_to_lower_size(crypt_stat, ia->ia_size);
+ if (lower_size_after_truncate < lower_size_before_truncate) {
+ lower_ia->ia_size = lower_size_after_truncate;
+ lower_ia->ia_valid |= ATTR_SIZE;
+ } else
+ lower_ia->ia_valid &= ~ATTR_SIZE;
}
out_free:
if (ecryptfs_file_to_private(&fake_ecryptfs_file))
return rc;
}
+/**
+ * ecryptfs_truncate
+ * @dentry: The ecryptfs layer dentry
+ * @new_length: The length to expand the file to
+ *
+ * Simple function that handles the truncation of an eCryptfs inode and
+ * its corresponding lower inode.
+ *
+ * Returns zero on success; non-zero otherwise
+ */
+int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+{
+ struct iattr ia = { .ia_valid = ATTR_SIZE, .ia_size = new_length };
+ struct iattr lower_ia = { .ia_valid = 0 };
+ int rc;
+
+ rc = truncate_upper(dentry, &ia, &lower_ia);
+ if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+
+ mutex_lock(&lower_dentry->d_inode->i_mutex);
+ rc = notify_change(lower_dentry, &lower_ia);
+ mutex_unlock(&lower_dentry->d_inode->i_mutex);
+ }
+ return rc;
+}
+
static int
ecryptfs_permission(struct inode *inode, int mask)
{
{
int rc = 0;
struct dentry *lower_dentry;
+ struct iattr lower_ia;
struct inode *inode;
struct inode *lower_inode;
struct ecryptfs_crypt_stat *crypt_stat;
}
}
mutex_unlock(&crypt_stat->cs_mutex);
+ memcpy(&lower_ia, ia, sizeof(lower_ia));
+ if (ia->ia_valid & ATTR_FILE)
+ lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file);
if (ia->ia_valid & ATTR_SIZE) {
- ecryptfs_printk(KERN_DEBUG,
- "ia->ia_valid = [0x%x] ATTR_SIZE" " = [0x%x]\n",
- ia->ia_valid, ATTR_SIZE);
- rc = ecryptfs_truncate(dentry, ia->ia_size);
- /* ecryptfs_truncate handles resizing of the lower file */
- ia->ia_valid &= ~ATTR_SIZE;
- ecryptfs_printk(KERN_DEBUG, "ia->ia_valid = [%x]\n",
- ia->ia_valid);
+ rc = truncate_upper(dentry, ia, &lower_ia);
if (rc < 0)
goto out;
}
* mode change is for clearing setuid/setgid bits. Allow lower fs
* to interpret this in its own way.
*/
- if (ia->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
- ia->ia_valid &= ~ATTR_MODE;
+ if (lower_ia.ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
+ lower_ia.ia_valid &= ~ATTR_MODE;
mutex_lock(&lower_dentry->d_inode->i_mutex);
- rc = notify_change(lower_dentry, ia);
+ rc = notify_change(lower_dentry, &lower_ia);
mutex_unlock(&lower_dentry->d_inode->i_mutex);
out:
fsstack_copy_attr_all(inode, lower_inode);
return rc;
}
+int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct kstat lower_stat;
+ int rc;
+
+ rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
+ ecryptfs_dentry_to_lower(dentry), &lower_stat);
+ if (!rc) {
+ generic_fillattr(dentry->d_inode, stat);
+ stat->blocks = lower_stat.blocks;
+ }
+ return rc;
+}
+
int
ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value,
size_t size, int flags)
const struct inode_operations ecryptfs_main_iops = {
.permission = ecryptfs_permission,
.setattr = ecryptfs_setattr,
+ .getattr = ecryptfs_getattr,
.setxattr = ecryptfs_setxattr,
.getxattr = ecryptfs_getxattr,
.listxattr = ecryptfs_listxattr,
* with as much information as it can before needing
* the lower filesystem.
* ecryptfs_read_super(): this accesses the lower filesystem and uses
- * ecryptfs_interpolate to perform most of the linking
- * ecryptfs_interpolate(): links the lower filesystem into ecryptfs
+ * ecryptfs_interpose to perform most of the linking
+ * ecryptfs_interpose(): links the lower filesystem into ecryptfs (inode.c)
*/
static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
const char *dev_name, void *raw_data,
return events;
}
-static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
+static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt)
+{
+ *cnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
+ ctx->count -= *cnt;
+}
+
+/**
+ * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
+ * @ctx: [in] Pointer to eventfd context.
+ * @wait: [in] Wait queue to be removed.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN : The operation would have blocked.
+ *
+ * This is used to atomically remove a wait queue entry from the eventfd wait
+ * queue head, and read/reset the counter value.
+ */
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+ __u64 *cnt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctx->wqh.lock, flags);
+ eventfd_ctx_do_read(ctx, cnt);
+ __remove_wait_queue(&ctx->wqh, wait);
+ if (*cnt != 0 && waitqueue_active(&ctx->wqh))
+ wake_up_locked_poll(&ctx->wqh, POLLOUT);
+ spin_unlock_irqrestore(&ctx->wqh.lock, flags);
+
+ return *cnt != 0 ? 0 : -EAGAIN;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue);
+
+/**
+ * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
+ * @ctx: [in] Pointer to eventfd context.
+ * @no_wait: [in] Different from zero if the operation should not block.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN : The operation would have blocked but @no_wait was nonzero.
+ * -ERESTARTSYS : A signal interrupted the wait operation.
+ *
+ * If @no_wait is zero, the function might sleep until the eventfd internal
+ * counter becomes greater than zero.
+ */
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt)
{
- struct eventfd_ctx *ctx = file->private_data;
ssize_t res;
- __u64 ucnt = 0;
DECLARE_WAITQUEUE(wait, current);
- if (count < sizeof(ucnt))
- return -EINVAL;
spin_lock_irq(&ctx->wqh.lock);
+ *cnt = 0;
res = -EAGAIN;
if (ctx->count > 0)
- res = sizeof(ucnt);
- else if (!(file->f_flags & O_NONBLOCK)) {
+ res = 0;
+ else if (!no_wait) {
__add_wait_queue(&ctx->wqh, &wait);
- for (res = 0;;) {
+ for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (ctx->count > 0) {
- res = sizeof(ucnt);
+ res = 0;
break;
}
if (signal_pending(current)) {
__remove_wait_queue(&ctx->wqh, &wait);
__set_current_state(TASK_RUNNING);
}
- if (likely(res > 0)) {
- ucnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
- ctx->count -= ucnt;
+ if (likely(res == 0)) {
+ eventfd_ctx_do_read(ctx, cnt);
if (waitqueue_active(&ctx->wqh))
wake_up_locked_poll(&ctx->wqh, POLLOUT);
}
spin_unlock_irq(&ctx->wqh.lock);
- if (res > 0 && put_user(ucnt, (__u64 __user *) buf))
- return -EFAULT;
return res;
}
+EXPORT_SYMBOL_GPL(eventfd_ctx_read);
+
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 cnt;
+
+ if (count < sizeof(cnt))
+ return -EINVAL;
+ res = eventfd_ctx_read(ctx, file->f_flags & O_NONBLOCK, &cnt);
+ if (res < 0)
+ return res;
+
+ return put_user(cnt, (__u64 __user *) buf) ? -EFAULT : sizeof(cnt);
+}
static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
loff_t *ppos)
int flush_old_exec(struct linux_binprm * bprm)
{
- char * name;
- int i, ch, retval;
- char tcomm[sizeof(current->comm)];
+ int retval;
/*
* Make sure we have a private signal table and that
goto out;
bprm->mm = NULL; /* We're using it now */
+ return 0;
+
+out:
+ return retval;
+}
+EXPORT_SYMBOL(flush_old_exec);
+
+void setup_new_exec(struct linux_binprm * bprm)
+{
+ int i, ch;
+ char * name;
+ char tcomm[sizeof(current->comm)];
+
+ arch_pick_mmap_layout(current->mm);
/* This is the point of no return */
current->sas_ss_sp = current->sas_ss_size = 0;
flush_signal_handlers(current, 0);
flush_old_files(current->files);
-
- return 0;
-
-out:
- return retval;
}
-
-EXPORT_SYMBOL(flush_old_exec);
+EXPORT_SYMBOL(setup_new_exec);
/*
* Prepare credentials and lock ->cred_guard_mutex.
so set the magic i_delalloc_reserve_flag after taking the
inode allocation semaphore for */
#define EXT4_GET_BLOCKS_DELALLOC_RESERVE 0x0004
- /* Call ext4_da_update_reserve_space() after successfully
- allocating the blocks */
-#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE 0x0008
/* caller is from the direct IO path, request to creation of an
unitialized extents if not allocated, split the uninitialized
extent if blocks has been preallocated already*/
-#define EXT4_GET_BLOCKS_DIO 0x0010
-#define EXT4_GET_BLOCKS_CONVERT 0x0020
+#define EXT4_GET_BLOCKS_DIO 0x0008
+#define EXT4_GET_BLOCKS_CONVERT 0x0010
#define EXT4_GET_BLOCKS_DIO_CREATE_EXT (EXT4_GET_BLOCKS_DIO|\
EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
/* Convert extent to initialized after direct IO complete */
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
extern qsize_t *ext4_get_reserved_space(struct inode *inode);
extern int flush_aio_dio_completed_IO(struct inode *inode);
+extern void ext4_da_update_reserve_space(struct inode *inode,
+ int used, int quota_claim);
/* ioctl.c */
extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
unmap_underlying_metadata_blocks(inode->i_sb->s_bdev,
newblock + max_blocks,
allocated - max_blocks);
+ allocated = max_blocks;
}
+
+ /*
+ * If we have done fallocate with the offset that is already
+ * delayed allocated, we would have block reservation
+ * and quota reservation done in the delayed write path.
+ * But fallocate would have already updated quota and block
+ * count for this offset. So cancel these reservation
+ */
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ext4_da_update_reserve_space(inode, allocated, 0);
+
map_out:
set_buffer_mapped(bh_result);
out1:
/* previous routine could use block we allocated */
newblock = ext_pblock(&newex);
allocated = ext4_ext_get_actual_len(&newex);
+ if (allocated > max_blocks)
+ allocated = max_blocks;
set_buffer_new(bh_result);
+ /*
+ * Update reserved blocks/metadata blocks after successful
+ * block allocation which had been deferred till now.
+ */
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ext4_da_update_reserve_space(inode, allocated, 1);
+
/*
* Cache the extent and update transaction to commit on fdatasync only
* when it is _not_ an uninitialized extent.
* Called with i_data_sem down, which is important since we can call
* ext4_discard_preallocations() from here.
*/
-static void ext4_da_update_reserve_space(struct inode *inode, int used)
+void ext4_da_update_reserve_space(struct inode *inode,
+ int used, int quota_claim)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
- int mdb_free = 0;
+ int mdb_free = 0, allocated_meta_blocks = 0;
spin_lock(&ei->i_block_reservation_lock);
if (unlikely(used > ei->i_reserved_data_blocks)) {
ei->i_reserved_data_blocks -= used;
used += ei->i_allocated_meta_blocks;
ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
+ allocated_meta_blocks = ei->i_allocated_meta_blocks;
ei->i_allocated_meta_blocks = 0;
percpu_counter_sub(&sbi->s_dirtyblocks_counter, used);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
/* Update quota subsystem */
- vfs_dq_claim_block(inode, used);
- if (mdb_free)
- vfs_dq_release_reservation_block(inode, mdb_free);
+ if (quota_claim) {
+ vfs_dq_claim_block(inode, used);
+ if (mdb_free)
+ vfs_dq_release_reservation_block(inode, mdb_free);
+ } else {
+ /*
+ * We did fallocate with an offset that is already delayed
+ * allocated. So on delayed allocated writeback we should
+ * not update the quota for allocated blocks. But then
+ * converting an fallocate region to initialized region would
+ * have caused a metadata allocation. So claim quota for
+ * that
+ */
+ if (allocated_meta_blocks)
+ vfs_dq_claim_block(inode, allocated_meta_blocks);
+ vfs_dq_release_reservation_block(inode, mdb_free + used);
+ }
/*
* If we have done all the pending block allocations and if
*/
EXT4_I(inode)->i_state &= ~EXT4_STATE_EXT_MIGRATE;
}
- }
+ /*
+ * Update reserved blocks/metadata blocks after successful
+ * block allocation which had been deferred till now. We don't
+ * support fallocate for non extent files. So we can update
+ * reserve space here.
+ */
+ if ((retval > 0) &&
+ (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
+ ext4_da_update_reserve_space(inode, retval, 1);
+ }
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
EXT4_I(inode)->i_delalloc_reserved_flag = 0;
- /*
- * Update reserved blocks/metadata blocks after successful
- * block allocation which had been deferred till now.
- */
- if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE))
- ext4_da_update_reserve_space(inode, retval);
-
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && buffer_mapped(bh)) {
int ret = check_block_validity(inode, "file system "
* later. Real quota accounting is done at pages writeout
* time.
*/
- if (vfs_dq_reserve_block(inode, md_needed + 1)) {
- /*
- * We tend to badly over-estimate the amount of
- * metadata blocks which are needed, so if we have
- * reserved any metadata blocks, try to force out the
- * inode and see if we have any better luck.
- */
- if (md_reserved && retries++ <= 3)
- goto retry;
+ if (vfs_dq_reserve_block(inode, md_needed + 1))
return -EDQUOT;
- }
if (ext4_claim_free_blocks(sbi, md_needed + 1)) {
vfs_dq_release_reservation_block(inode, md_needed + 1);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
- retry:
- if (md_reserved)
- write_inode_now(inode, (retries == 3));
yield();
goto repeat;
}
* variables are updated after the blocks have been allocated.
*/
new.b_state = 0;
- get_blocks_flags = (EXT4_GET_BLOCKS_CREATE |
- EXT4_GET_BLOCKS_DELALLOC_RESERVE);
+ get_blocks_flags = EXT4_GET_BLOCKS_CREATE;
if (mpd->b_state & (1 << BH_Delay))
- get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE;
+ get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
+
blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks,
&new, get_blocks_flags);
if (blks < 0) {
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- int ret, retries = 0;
+ int ret, retries = 0, quota_retries = 0;
struct page *page;
pgoff_t index;
unsigned from, to;
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
+
+ if ((ret == -EDQUOT) &&
+ EXT4_I(inode)->i_reserved_meta_blocks &&
+ (quota_retries++ < 3)) {
+ /*
+ * Since we often over-estimate the number of meta
+ * data blocks required, we may sometimes get a
+ * spurios out of quota error even though there would
+ * be enough space once we write the data blocks and
+ * find out how many meta data blocks were _really_
+ * required. So try forcing the inode write to see if
+ * that helps.
+ */
+ write_inode_now(inode, (quota_retries == 3));
+ goto retry;
+ }
out:
return ret;
}
static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
- write_lock_irq(&filp->f_owner.lock);
+ unsigned long flags;
+
+ write_lock_irqsave(&filp->f_owner.lock, flags);
if (force || !filp->f_owner.pid) {
put_pid(filp->f_owner.pid);
filp->f_owner.pid = get_pid(pid);
filp->f_owner.euid = cred->euid;
}
}
- write_unlock_irq(&filp->f_owner.lock);
+ write_unlock_irqrestore(&filp->f_owner.lock, flags);
}
int __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
error_rsb_inval:
ret = -EINVAL;
error_rsb:
+ kfree(rsb);
return ret;
}
#include <linux/hardirq.h>
#define ACPI_PREEMPTION_POINT() \
do { \
- if (!in_atomic_preempt_off()) \
+ if (!in_atomic_preempt_off() && !irqs_disabled()) \
cond_resched(); \
} while (0)
/* notify the driver we are taking a fault on this BO
* and have reserved it */
void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
+
+ /**
+ * notify the driver that we're about to swap out this bo
+ */
+ void (*swap_notify) (struct ttm_buffer_object *bo);
};
/**
void __acpi_unmap_table(char *map, unsigned long size);
int early_acpi_boot_init(void);
int acpi_boot_init (void);
-int acpi_boot_table_init (void);
+void acpi_boot_table_init (void);
int acpi_mps_check (void);
int acpi_numa_init (void);
return 0;
}
-static inline int acpi_boot_table_init(void)
+static inline void acpi_boot_table_init(void)
{
- return 0;
+ return;
}
static inline int acpi_mps_check(void)
extern int __must_check remove_arg_zero(struct linux_binprm *);
extern int search_binary_handler(struct linux_binprm *,struct pt_regs *);
extern int flush_old_exec(struct linux_binprm * bprm);
+extern void setup_new_exec(struct linux_binprm * bprm);
extern int suid_dumpable;
#define SUID_DUMP_DISABLE 0 /* No setuid dumping */
extern void blk_set_default_limits(struct queue_limits *lim);
extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t offset);
+extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+ sector_t offset);
extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
static inline int queue_sector_discard_alignment(struct request_queue *q,
sector_t sector)
{
- return ((sector << 9) - q->limits.discard_alignment)
- & (q->limits.discard_granularity - 1);
+ struct queue_limits *lim = &q->limits;
+ unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
+
+ return (lim->discard_granularity + lim->discard_alignment - alignment)
+ & (lim->discard_granularity - 1);
}
static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.6"
+#define REL_VERSION "8.3.7"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 91
NL_PACKET(resize, 7,
NL_INT64( 29, T_MAY_IGNORE, resize_size)
+ NL_BIT( 68, T_MAY_IGNORE, resize_force)
)
NL_PACKET(syncer_conf, 8,
#include <linux/fcntl.h>
#include <linux/file.h>
+#include <linux/wait.h>
/*
* CAREFUL: Check include/asm-generic/fcntl.h when defining
struct eventfd_ctx *eventfd_ctx_fdget(int fd);
struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
int eventfd_signal(struct eventfd_ctx *ctx, int n);
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+ __u64 *cnt);
#else /* CONFIG_EVENTFD */
}
+static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait,
+ __u64 *cnt)
+{
+ return -ENOSYS;
+}
+
+static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx,
+ wait_queue_t *wait, __u64 *cnt)
+{
+ return -ENOSYS;
+}
+
#endif
#endif /* _LINUX_EVENTFD_H */
* @immediate: If non-zero, immediate key to insert before pointer
* @key: Upper 8 bits of root directory pointer
* @data: Userspace pointer to contents of descriptor block
- * @length: Length of descriptor block data, in bytes
+ * @length: Length of descriptor block data, in quadlets
* @handle: Handle to the descriptor, written by the kernel
*
* Add a descriptor block and optionally a preceding immediate key to the local
* If not 0, the @immediate field specifies an immediate key which will be
* inserted before the root directory pointer.
*
+ * @immediate, @key, and @data array elements are CPU-endian quadlets.
+ *
* If successful, the kernel adds the descriptor and writes back a handle to the
* kernel-side object to be used for later removal of the descriptor block and
* immediate key.
#define part_stat_read(part, field) \
({ \
typeof((part)->dkstats->field) res = 0; \
- int i; \
- for_each_possible_cpu(i) \
- res += per_cpu_ptr((part)->dkstats, i)->field; \
+ unsigned int _cpu; \
+ for_each_possible_cpu(_cpu) \
+ res += per_cpu_ptr((part)->dkstats, _cpu)->field; \
res; \
})
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#include <linux/radix-tree.h>
#include <linux/rcupdate.h>
-/*
- * This is the per-process anticipatory I/O scheduler state.
- */
-struct as_io_context {
- spinlock_t lock;
-
- void (*dtor)(struct as_io_context *aic); /* destructor */
- void (*exit)(struct as_io_context *aic); /* called on task exit */
-
- unsigned long state;
- atomic_t nr_queued; /* queued reads & sync writes */
- atomic_t nr_dispatched; /* number of requests gone to the drivers */
-
- /* IO History tracking */
- /* Thinktime */
- unsigned long last_end_request;
- unsigned long ttime_total;
- unsigned long ttime_samples;
- unsigned long ttime_mean;
- /* Layout pattern */
- unsigned int seek_samples;
- sector_t last_request_pos;
- u64 seek_total;
- sector_t seek_mean;
-};
-
struct cfq_queue;
struct cfq_io_context {
void *key;
unsigned long last_waited; /* Time last woken after wait for request */
int nr_batch_requests; /* Number of requests left in the batch */
- struct as_io_context *aic;
struct radix_tree_root radix_root;
struct hlist_head cic_list;
void *ioc_data;
enum kmsg_dump_reason {
KMSG_DUMP_OOPS,
KMSG_DUMP_PANIC,
+ KMSG_DUMP_KEXEC,
};
/**
--- /dev/null
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef __LINUX_MTD_PISMO_H
+#define __LINUX_MTD_PISMO_H
+
+struct pismo_pdata {
+ void (*set_vpp)(void *, int);
+ void *vpp_data;
+ phys_addr_t cs_addrs[5];
+};
+
+#endif
extern struct page * read_cache_page(struct address_space *mapping,
pgoff_t index, filler_t *filler,
void *data);
+extern struct page * read_cache_page_gfp(struct address_space *mapping,
+ pgoff_t index, gfp_t gfp_mask);
extern int read_cache_pages(struct address_space *mapping,
struct list_head *pages, filler_t *filler, void *data);
int pci_prepare_to_sleep(struct pci_dev *dev);
int pci_back_from_sleep(struct pci_dev *dev);
+/* For use by arch with custom probe code */
+void set_pcie_port_type(struct pci_dev *pdev);
+void set_pcie_hotplug_bridge(struct pci_dev *pdev);
+
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
#ifdef CONFIG_HOTPLUG
*/
static inline int is_software_event(struct perf_event *event)
{
- return (event->attr.type != PERF_TYPE_RAW) &&
- (event->attr.type != PERF_TYPE_HARDWARE) &&
- (event->attr.type != PERF_TYPE_HW_CACHE);
+ switch (event->attr.type) {
+ case PERF_TYPE_SOFTWARE:
+ case PERF_TYPE_TRACEPOINT:
+ /* for now the breakpoint stuff also works as software event */
+ case PERF_TYPE_BREAKPOINT:
+ return 1;
+ }
+ return 0;
}
extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
int phy_driver_register(struct phy_driver *new_driver);
void phy_prepare_link(struct phy_device *phydev,
void (*adjust_link)(struct net_device *));
+void phy_state_machine(struct work_struct *work);
void phy_start_machine(struct phy_device *phydev,
void (*handler)(struct net_device *));
void phy_stop_machine(struct phy_device *phydev);
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
it with task_lock())
- - initialized normally by flush_old_exec */
+ - initialized normally by setup_new_exec */
/* file system info */
int link_count, total_link_count;
#ifdef CONFIG_SYSVIPC
* 1 = 4, 2 = 8, 3 = 16 (median > averaging)
*/
u8 median;
- /* 1 = AUX/VBAT/GPIO set to GPIO Output */
- u8 gpio_output;
- /* Initial GPIO pin state (valid if gpio_output = 1) */
- u8 gpio_default;
+ /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+ * requires CONFIG_GPIOLIB
+ */
+ bool gpio_export;
+ /* identifies the first GPIO number handled by this chip;
+ * or, if negative, requests dynamic ID allocation.
+ */
+ s32 gpio_base;
};
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
unsigned reset_running:1;
+ unsigned resetting_device:1; /* true: bandwidth alloc after reset */
struct device dev; /* interface specific device info */
struct device *usb_dev;
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/xfrm.h>
+#include <net/dst_ops.h>
struct ctl_table_header;
unsigned int policy_count[XFRM_POLICY_MAX * 2];
struct work_struct policy_hash_work;
+ struct dst_ops xfrm4_dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ struct dst_ops xfrm6_dst_ops;
+#endif
+
struct sock *nlsk;
struct sock *nlsk_stash;
static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
{
if (atomic_dec_and_test(&nr_neigh->refcount)) {
+ if (nr_neigh->ax25)
+ ax25_cb_put(nr_neigh->ax25);
kfree(nr_neigh->digipeat);
kfree(nr_neigh);
}
extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 seq);
extern int xfrm_state_delete(struct xfrm_state *x);
extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info);
-extern void xfrm_sad_getinfo(struct xfrmk_sadinfo *si);
-extern void xfrm_spd_getinfo(struct xfrmk_spdinfo *si);
+extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
+extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
extern int xfrm_replay_check(struct xfrm_state *x,
struct sk_buff *skb, __be32 seq);
extern void xfrm_replay_advance(struct xfrm_state *x, __be32 seq);
struct fc_bsg_rport_els r_els;
struct fc_bsg_rport_ct r_ct;
} rqst_data;
-};
+} __attribute__((packed));
/* response (request sense data) structure of the sg_io_v4 */
#include <linux/console.h>
#include <linux/vmalloc.h>
#include <linux/swap.h>
+#include <linux/kmsg_dump.h>
#include <asm/page.h>
#include <asm/uaccess.h>
if (mutex_trylock(&kexec_mutex)) {
if (kexec_crash_image) {
struct pt_regs fixed_regs;
+
+ kmsg_dump(KMSG_DUMP_KEXEC);
+
crash_setup_regs(&fixed_regs, regs);
crash_save_vmcoreinfo();
machine_crash_shutdown(&fixed_regs);
dump_stack();
#endif
- kmsg_dump(KMSG_DUMP_PANIC);
/*
* If we have crashed and we have a crash kernel loaded let it handle
* everything else.
*/
crash_kexec(NULL);
+ kmsg_dump(KMSG_DUMP_PANIC);
+
/*
* Note smp_send_stop is the usual smp shutdown function, which
* unfortunately means it may not be hardened to work in a panic
static int perf_event_task_match(struct perf_event *event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
static int perf_event_comm_match(struct perf_event *event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
static int perf_event_mmap_match(struct perf_event *event,
struct perf_mmap_event *mmap_event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
static const char const *kmsg_reasons[] = {
[KMSG_DUMP_OOPS] = "oops",
[KMSG_DUMP_PANIC] = "panic",
+ [KMSG_DUMP_KEXEC] = "kexec",
};
static const char *kmsg_to_str(enum kmsg_dump_reason reason)
cpu = *((int *)arg);
list_for_each_entry_safe(dev, tmp, &clockevent_devices, list) {
if (cpumask_test_cpu(cpu, dev->cpumask) &&
- cpumask_weight(dev->cpumask) == 1) {
+ cpumask_weight(dev->cpumask) == 1 &&
+ !tick_is_broadcast_device(dev)) {
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
list_del(&dev->list);
}
{
unsigned long flags;
- spin_lock_irqsave(&watchdog_lock, flags);
+ /*
+ * We use trylock here to avoid a potential dead lock when
+ * kgdb calls this code after the kernel has been stopped with
+ * watchdog_lock held. When watchdog_lock is held we just
+ * return and accept, that the watchdog might trigger and mark
+ * the monitored clock source (usually TSC) unstable.
+ *
+ * This does not affect the other caller clocksource_resume()
+ * because at this point the kernel is UP, interrupts are
+ * disabled and nothing can hold watchdog_lock.
+ */
+ if (!spin_trylock_irqsave(&watchdog_lock, flags))
+ return;
clocksource_reset_watchdog();
spin_unlock_irqrestore(&watchdog_lock, flags);
}
* clocksource_touch_watchdog - Update watchdog
*
* Update the watchdog after exception contexts such as kgdb so as not
- * to incorrectly trip the watchdog.
- *
+ * to incorrectly trip the watchdog. This might fail when the kernel
+ * was stopped in code which holds watchdog_lock.
*/
void clocksource_touch_watchdog(void)
{
run_local_timers();
rcu_check_callbacks(cpu, user_tick);
printk_tick();
+ perf_event_do_pending();
scheduler_tick();
run_posix_cpu_timers(p);
}
{
struct tvec_base *base = __get_cpu_var(tvec_bases);
- perf_event_do_pending();
-
hrtimer_run_pending();
if (time_after_eq(jiffies, base->timer_jiffies))
config HAVE_FUNCTION_GRAPH_FP_TEST
bool
help
- An arch may pass in a unique value (frame pointer) to both the
- entering and exiting of a function. On exit, the value is compared
- and if it does not match, then it will panic the kernel.
+ See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_TRACE_MCOUNT_TEST
bool
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long head;
struct buffer_page *head_page;
+ struct buffer_page *cache_reader_page;
+ unsigned long cache_read;
u64 read_stamp;
};
iter->read_stamp = cpu_buffer->read_stamp;
else
iter->read_stamp = iter->head_page->page->time_stamp;
+ iter->cache_reader_page = cpu_buffer->reader_page;
+ iter->cache_read = cpu_buffer->read;
}
/**
struct ring_buffer_event *event;
int nr_loops = 0;
- if (ring_buffer_iter_empty(iter))
- return NULL;
-
cpu_buffer = iter->cpu_buffer;
buffer = cpu_buffer->buffer;
+ /*
+ * Check if someone performed a consuming read to
+ * the buffer. A consuming read invalidates the iterator
+ * and we need to reset the iterator in this case.
+ */
+ if (unlikely(iter->cache_read != cpu_buffer->read ||
+ iter->cache_reader_page != cpu_buffer->reader_page))
+ rb_iter_reset(iter);
+
again:
+ if (ring_buffer_iter_empty(iter))
+ return NULL;
+
/*
* We repeat when a timestamp is encountered.
* We can get multiple timestamps by nested interrupts or also
if (rb_per_cpu_empty(cpu_buffer))
return NULL;
+ if (iter->head >= local_read(&iter->head_page->page->commit)) {
+ rb_inc_iter(iter);
+ goto again;
+ }
+
event = rb_iter_head_event(iter);
switch (event->type_len) {
return;
}
+ if (WARN_ON_ONCE(pid < 0)) {
+ strcpy(comm, "<XXX>");
+ return;
+ }
+
if (pid > PID_MAX_DEFAULT) {
strcpy(comm, "<...>");
return;
return count;
}
-const struct file_operations filter_fops = {
+static const struct file_operations filter_fops = {
.read = filter_read,
.write = filter_write,
};
static struct page *__read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *,struct page*),
- void *data)
+ void *data,
+ gfp_t gfp)
{
struct page *page;
int err;
repeat:
page = find_get_page(mapping, index);
if (!page) {
- page = page_cache_alloc_cold(mapping);
+ page = __page_cache_alloc(gfp | __GFP_COLD);
if (!page)
return ERR_PTR(-ENOMEM);
err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL);
return page;
}
-/**
- * read_cache_page_async - read into page cache, fill it if needed
- * @mapping: the page's address_space
- * @index: the page index
- * @filler: function to perform the read
- * @data: destination for read data
- *
- * Same as read_cache_page, but don't wait for page to become unlocked
- * after submitting it to the filler.
- *
- * Read into the page cache. If a page already exists, and PageUptodate() is
- * not set, try to fill the page but don't wait for it to become unlocked.
- *
- * If the page does not get brought uptodate, return -EIO.
- */
-struct page *read_cache_page_async(struct address_space *mapping,
+static struct page *do_read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *,struct page*),
- void *data)
+ void *data,
+ gfp_t gfp)
+
{
struct page *page;
int err;
retry:
- page = __read_cache_page(mapping, index, filler, data);
+ page = __read_cache_page(mapping, index, filler, data, gfp);
if (IS_ERR(page))
return page;
if (PageUptodate(page))
mark_page_accessed(page);
return page;
}
+
+/**
+ * read_cache_page_async - read into page cache, fill it if needed
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @filler: function to perform the read
+ * @data: destination for read data
+ *
+ * Same as read_cache_page, but don't wait for page to become unlocked
+ * after submitting it to the filler.
+ *
+ * Read into the page cache. If a page already exists, and PageUptodate() is
+ * not set, try to fill the page but don't wait for it to become unlocked.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_async(struct address_space *mapping,
+ pgoff_t index,
+ int (*filler)(void *,struct page*),
+ void *data)
+{
+ return do_read_cache_page(mapping, index, filler, data, mapping_gfp_mask(mapping));
+}
EXPORT_SYMBOL(read_cache_page_async);
+static struct page *wait_on_page_read(struct page *page)
+{
+ if (!IS_ERR(page)) {
+ wait_on_page_locked(page);
+ if (!PageUptodate(page)) {
+ page_cache_release(page);
+ page = ERR_PTR(-EIO);
+ }
+ }
+ return page;
+}
+
+/**
+ * read_cache_page_gfp - read into page cache, using specified page allocation flags.
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @gfp: the page allocator flags to use if allocating
+ *
+ * This is the same as "read_mapping_page(mapping, index, NULL)", but with
+ * any new page allocations done using the specified allocation flags. Note
+ * that the Radix tree operations will still use GFP_KERNEL, so you can't
+ * expect to do this atomically or anything like that - but you can pass in
+ * other page requirements.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_gfp(struct address_space *mapping,
+ pgoff_t index,
+ gfp_t gfp)
+{
+ filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+
+ return wait_on_page_read(do_read_cache_page(mapping, index, filler, NULL, gfp));
+}
+EXPORT_SYMBOL(read_cache_page_gfp);
+
/**
* read_cache_page - read into page cache, fill it if needed
* @mapping: the page's address_space
int (*filler)(void *,struct page*),
void *data)
{
- struct page *page;
-
- page = read_cache_page_async(mapping, index, filler, data);
- if (IS_ERR(page))
- goto out;
- wait_on_page_locked(page);
- if (!PageUptodate(page)) {
- page_cache_release(page);
- page = ERR_PTR(-EIO);
- }
- out:
- return page;
+ return wait_on_page_read(read_cache_page_async(mapping, index, filler, data));
}
EXPORT_SYMBOL(read_cache_page);
page = list_entry(list->prev, struct page, lru);
/* must delete as __free_one_page list manipulates */
list_del(&page->lru);
- __free_one_page(page, zone, 0, migratetype);
- trace_mm_page_pcpu_drain(page, 0, migratetype);
+ /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
+ __free_one_page(page, zone, 0, page_private(page));
+ trace_mm_page_pcpu_drain(page, 0, page_private(page));
} while (--count && --batch_free && !list_empty(list));
}
spin_unlock(&zone->lock);
}
rcu_read_unlock();
- if (nr) {
- BUG_ON(nr > atomic_read(&vmap_lazy_nr));
+ if (nr)
atomic_sub(nr, &vmap_lazy_nr);
- }
if (nr || force_flush)
flush_tlb_kernel_range(*start, *end);
goto err_unlock;
}
- rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
+ rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats,
smp_processor_id());
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
ma = &ifa->address;
else { /* We need to make a copy of the entry. */
da.s_node = sa.s_node;
- da.s_net = da.s_net;
+ da.s_net = sa.s_net;
ma = &da;
}
#endif
}
+ /*
+ * There is one ref for the state machine; a caller needs
+ * one more to put it back, just like with the existing one.
+ */
+ ax25_cb_hold(ax25);
+
ax25_cb_add(ax25);
ax25->state = AX25_STATE_1;
return err;
}
-static struct kmem_cache *ccid_kmem_cache_create(int obj_size, const char *fmt,...)
+static struct kmem_cache *ccid_kmem_cache_create(int obj_size, char *slab_name_fmt, const char *fmt,...)
{
struct kmem_cache *slab;
- char slab_name_fmt[32], *slab_name;
va_list args;
va_start(args, fmt);
vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args);
va_end(args);
- slab_name = kstrdup(slab_name_fmt, GFP_KERNEL);
- if (slab_name == NULL)
- return NULL;
- slab = kmem_cache_create(slab_name, sizeof(struct ccid) + obj_size, 0,
+ slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0,
SLAB_HWCACHE_ALIGN, NULL);
- if (slab == NULL)
- kfree(slab_name);
return slab;
}
static void ccid_kmem_cache_destroy(struct kmem_cache *slab)
{
- if (slab != NULL) {
- const char *name = kmem_cache_name(slab);
-
+ if (slab != NULL)
kmem_cache_destroy(slab);
- kfree(name);
- }
}
static int ccid_activate(struct ccid_operations *ccid_ops)
ccid_ops->ccid_hc_rx_slab =
ccid_kmem_cache_create(ccid_ops->ccid_hc_rx_obj_size,
+ ccid_ops->ccid_hc_rx_slab_name,
"ccid%u_hc_rx_sock",
ccid_ops->ccid_id);
if (ccid_ops->ccid_hc_rx_slab == NULL)
ccid_ops->ccid_hc_tx_slab =
ccid_kmem_cache_create(ccid_ops->ccid_hc_tx_obj_size,
+ ccid_ops->ccid_hc_tx_slab_name,
"ccid%u_hc_tx_sock",
ccid_ops->ccid_id);
if (ccid_ops->ccid_hc_tx_slab == NULL)
const char *ccid_name;
struct kmem_cache *ccid_hc_rx_slab,
*ccid_hc_tx_slab;
+ char ccid_hc_rx_slab_name[32];
+ char ccid_hc_tx_slab_name[32];
__u32 ccid_hc_rx_obj_size,
ccid_hc_tx_obj_size;
/* Interface Routines */
if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops))
goto err0;
- ret = register_jprobe(&dccp_send_probe);
+ ret = try_then_request_module((register_jprobe(&dccp_send_probe) == 0),
+ "dccp");
if (ret)
goto err1;
yes = entry->sport >= op[1].no;
break;
case INET_DIAG_BC_S_LE:
- yes = entry->dport <= op[1].no;
+ yes = entry->sport <= op[1].no;
break;
case INET_DIAG_BC_D_GE:
yes = entry->dport >= op[1].no;
{
remove_proc_entry("rt_cache", net->proc_net_stat);
remove_proc_entry("rt_cache", net->proc_net);
+#ifdef CONFIG_NET_CLS_ROUTE
remove_proc_entry("rt_acct", net->proc_net);
+#endif
}
static struct pernet_operations ip_rt_proc_ops __net_initdata = {
MODULE_PARM_DESC(port, "Port to match (0=all)");
module_param(port, int, 0);
-static int bufsize __read_mostly = 4096;
+static unsigned int bufsize __read_mostly = 4096;
MODULE_PARM_DESC(bufsize, "Log buffer size in packets (4096)");
-module_param(bufsize, int, 0);
+module_param(bufsize, uint, 0);
static int full __read_mostly;
MODULE_PARM_DESC(full, "Full log (1=every ack packet received, 0=only cwnd changes)");
static inline int tcp_probe_used(void)
{
- return (tcp_probe.head - tcp_probe.tail) % bufsize;
+ return (tcp_probe.head - tcp_probe.tail) & (bufsize - 1);
}
static inline int tcp_probe_avail(void)
{
- return bufsize - tcp_probe_used();
+ return bufsize - tcp_probe_used() - 1;
}
/*
p->ssthresh = tcp_current_ssthresh(sk);
p->srtt = tp->srtt >> 3;
- tcp_probe.head = (tcp_probe.head + 1) % bufsize;
+ tcp_probe.head = (tcp_probe.head + 1) & (bufsize - 1);
}
tcp_probe.lastcwnd = tp->snd_cwnd;
spin_unlock(&tcp_probe.lock);
static int tcpprobe_sprint(char *tbuf, int n)
{
const struct tcp_log *p
- = tcp_probe.log + tcp_probe.tail % bufsize;
+ = tcp_probe.log + tcp_probe.tail;
struct timespec tv
= ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start));
width = tcpprobe_sprint(tbuf, sizeof(tbuf));
if (cnt + width < len)
- tcp_probe.tail = (tcp_probe.tail + 1) % bufsize;
+ tcp_probe.tail = (tcp_probe.tail + 1) & (bufsize - 1);
spin_unlock_bh(&tcp_probe.lock);
init_waitqueue_head(&tcp_probe.wait);
spin_lock_init(&tcp_probe.lock);
- if (bufsize < 0)
+ if (bufsize == 0)
return -EINVAL;
+ bufsize = roundup_pow_of_two(bufsize);
tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL);
if (!tcp_probe.log)
goto err0;
if (ret)
goto err1;
- pr_info("TCP probe registered (port=%d)\n", port);
+ pr_info("TCP probe registered (port=%d) bufsize=%u\n", port, bufsize);
return 0;
err1:
proc_net_remove(&init_net, procname);
#include <net/xfrm.h>
#include <net/ip.h>
-static struct dst_ops xfrm4_dst_ops;
static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
static inline int xfrm4_garbage_collect(struct dst_ops *ops)
{
- xfrm4_policy_afinfo.garbage_collect(&init_net);
- return (atomic_read(&xfrm4_dst_ops.entries) > xfrm4_dst_ops.gc_thresh*2);
+ struct net *net = container_of(ops, struct net, xfrm.xfrm4_dst_ops);
+
+ xfrm4_policy_afinfo.garbage_collect(net);
+ return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
}
static void xfrm4_update_pmtu(struct dst_entry *dst, u32 mtu)
static struct ctl_table xfrm4_policy_table[] = {
{
.procname = "xfrm4_gc_thresh",
- .data = &xfrm4_dst_ops.gc_thresh,
+ .data = &init_net.xfrm.xfrm4_dst_ops.gc_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
void __init xfrm4_init(int rt_max_size)
{
- xfrm4_state_init();
- xfrm4_policy_init();
/*
* Select a default value for the gc_thresh based on the main route
* table hash size. It seems to me the worst case scenario is when
* and start cleaning when were 1/2 full
*/
xfrm4_dst_ops.gc_thresh = rt_max_size/2;
+
+ xfrm4_state_init();
+ xfrm4_policy_init();
#ifdef CONFIG_SYSCTL
sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv4_ctl_path,
xfrm4_policy_table);
#include <net/mip6.h>
#endif
-static struct dst_ops xfrm6_dst_ops;
static struct xfrm_policy_afinfo xfrm6_policy_afinfo;
static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos,
static inline int xfrm6_garbage_collect(struct dst_ops *ops)
{
- xfrm6_policy_afinfo.garbage_collect(&init_net);
- return (atomic_read(&xfrm6_dst_ops.entries) > xfrm6_dst_ops.gc_thresh*2);
+ struct net *net = container_of(ops, struct net, xfrm.xfrm6_dst_ops);
+
+ xfrm6_policy_afinfo.garbage_collect(net);
+ return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
}
static void xfrm6_update_pmtu(struct dst_entry *dst, u32 mtu)
static struct ctl_table xfrm6_policy_table[] = {
{
.procname = "xfrm6_gc_thresh",
- .data = &xfrm6_dst_ops.gc_thresh,
+ .data = &init_net.xfrm.xfrm6_dst_ops.gc_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
int ret;
unsigned int gc_thresh;
- ret = xfrm6_policy_init();
- if (ret)
- goto out;
-
- ret = xfrm6_state_init();
- if (ret)
- goto out_policy;
/*
* We need a good default value for the xfrm6 gc threshold.
* In ipv4 we set it to the route hash table size * 8, which
*/
gc_thresh = FIB6_TABLE_HASHSZ * 8;
xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh;
+
+ ret = xfrm6_policy_init();
+ if (ret)
+ goto out;
+
+ ret = xfrm6_state_init();
+ if (ret)
+ goto out_policy;
+
#ifdef CONFIG_SYSCTL
sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path,
xfrm6_policy_table);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_conf *conf = &local->hw.conf;
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
return -EOPNOTSUPP;
rate_control_pid_normalize(pinfo, sband->n_bitrates);
/* Compute the proportional, integral and derivative errors. */
- err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf;
+ err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT;
err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
dptr = skb_push(skb, 1);
*dptr = AX25_P_NETROM;
- ax25s = ax25_send_frame(skb, 256, (ax25_address *)dev->dev_addr, &nr_neigh->callsign, nr_neigh->digipeat, nr_neigh->dev);
- if (nr_neigh->ax25 && ax25s) {
- /* We were already holding this ax25_cb */
+ ax25s = nr_neigh->ax25;
+ nr_neigh->ax25 = ax25_send_frame(skb, 256,
+ (ax25_address *)dev->dev_addr,
+ &nr_neigh->callsign,
+ nr_neigh->digipeat, nr_neigh->dev);
+ if (ax25s)
ax25_cb_put(ax25s);
- }
- nr_neigh->ax25 = ax25s;
dev_put(dev);
ret = (nr_neigh->ax25 != NULL);
static int rose_send_frame(struct sk_buff *skb, struct rose_neigh *neigh)
{
ax25_address *rose_call;
+ ax25_cb *ax25s;
if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
rose_call = (ax25_address *)neigh->dev->dev_addr;
else
rose_call = &rose_callsign;
+ ax25s = neigh->ax25;
neigh->ax25 = ax25_send_frame(skb, 260, rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+ if (ax25s)
+ ax25_cb_put(ax25s);
return (neigh->ax25 != NULL);
}
static int rose_link_up(struct rose_neigh *neigh)
{
ax25_address *rose_call;
+ ax25_cb *ax25s;
if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
rose_call = (ax25_address *)neigh->dev->dev_addr;
else
rose_call = &rose_callsign;
+ ax25s = neigh->ax25;
neigh->ax25 = ax25_find_cb(rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+ if (ax25s)
+ ax25_cb_put(ax25s);
return (neigh->ax25 != NULL);
}
if ((s = rose_neigh_list) == rose_neigh) {
rose_neigh_list = rose_neigh->next;
+ if (rose_neigh->ax25)
+ ax25_cb_put(rose_neigh->ax25);
kfree(rose_neigh->digipeat);
kfree(rose_neigh);
return;
while (s != NULL && s->next != NULL) {
if (s->next == rose_neigh) {
s->next = rose_neigh->next;
+ if (rose_neigh->ax25)
+ ax25_cb_put(rose_neigh->ax25);
kfree(rose_neigh->digipeat);
kfree(rose_neigh);
return;
if (rose_neigh != NULL) {
rose_neigh->ax25 = NULL;
+ ax25_cb_put(ax25);
rose_del_route_by_neigh(rose_neigh);
rose_kill_by_neigh(rose_neigh);
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ wdev->wext.connect.ssid_len = 0;
#endif
}
return 0;
}
-void xfrm_spd_getinfo(struct xfrmk_spdinfo *si)
+void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si)
{
read_lock_bh(&xfrm_policy_lock);
- si->incnt = init_net.xfrm.policy_count[XFRM_POLICY_IN];
- si->outcnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT];
- si->fwdcnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD];
- si->inscnt = init_net.xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
- si->outscnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
- si->fwdscnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
- si->spdhcnt = init_net.xfrm.policy_idx_hmask;
+ si->incnt = net->xfrm.policy_count[XFRM_POLICY_IN];
+ si->outcnt = net->xfrm.policy_count[XFRM_POLICY_OUT];
+ si->fwdcnt = net->xfrm.policy_count[XFRM_POLICY_FWD];
+ si->inscnt = net->xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
+ si->outscnt = net->xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
+ si->fwdscnt = net->xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
+ si->spdhcnt = net->xfrm.policy_idx_hmask;
si->spdhmcnt = xfrm_policy_hashmax;
read_unlock_bh(&xfrm_policy_lock);
}
return tos;
}
-static inline struct xfrm_dst *xfrm_alloc_dst(int family)
+static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family)
{
struct xfrm_policy_afinfo *afinfo = xfrm_policy_get_afinfo(family);
+ struct dst_ops *dst_ops;
struct xfrm_dst *xdst;
if (!afinfo)
return ERR_PTR(-EINVAL);
- xdst = dst_alloc(afinfo->dst_ops) ?: ERR_PTR(-ENOBUFS);
+ switch (family) {
+ case AF_INET:
+ dst_ops = &net->xfrm.xfrm4_dst_ops;
+ break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ dst_ops = &net->xfrm.xfrm6_dst_ops;
+ break;
+#endif
+ default:
+ BUG();
+ }
+ xdst = dst_alloc(dst_ops) ?: ERR_PTR(-ENOBUFS);
xfrm_policy_put_afinfo(afinfo);
struct flowi *fl,
struct dst_entry *dst)
{
+ struct net *net = xp_net(policy);
unsigned long now = jiffies;
struct net_device *dev;
struct dst_entry *dst_prev = NULL;
dst_hold(dst);
for (; i < nx; i++) {
- struct xfrm_dst *xdst = xfrm_alloc_dst(family);
+ struct xfrm_dst *xdst = xfrm_alloc_dst(net, family);
struct dst_entry *dst1 = &xdst->u.dst;
err = PTR_ERR(xdst);
int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
{
+ struct net *net;
int err = 0;
if (unlikely(afinfo == NULL))
return -EINVAL;
xfrm_policy_afinfo[afinfo->family] = afinfo;
}
write_unlock_bh(&xfrm_policy_afinfo_lock);
+
+ rtnl_lock();
+ for_each_net(net) {
+ struct dst_ops *xfrm_dst_ops;
+
+ switch (afinfo->family) {
+ case AF_INET:
+ xfrm_dst_ops = &net->xfrm.xfrm4_dst_ops;
+ break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ xfrm_dst_ops = &net->xfrm.xfrm6_dst_ops;
+ break;
+#endif
+ default:
+ BUG();
+ }
+ *xfrm_dst_ops = *afinfo->dst_ops;
+ }
+ rtnl_unlock();
+
return err;
}
EXPORT_SYMBOL(xfrm_policy_register_afinfo);
}
EXPORT_SYMBOL(xfrm_policy_unregister_afinfo);
+static void __net_init xfrm_dst_ops_init(struct net *net)
+{
+ struct xfrm_policy_afinfo *afinfo;
+
+ read_lock_bh(&xfrm_policy_afinfo_lock);
+ afinfo = xfrm_policy_afinfo[AF_INET];
+ if (afinfo)
+ net->xfrm.xfrm4_dst_ops = *afinfo->dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ afinfo = xfrm_policy_afinfo[AF_INET6];
+ if (afinfo)
+ net->xfrm.xfrm6_dst_ops = *afinfo->dst_ops;
+#endif
+ read_unlock_bh(&xfrm_policy_afinfo_lock);
+}
+
static struct xfrm_policy_afinfo *xfrm_policy_get_afinfo(unsigned short family)
{
struct xfrm_policy_afinfo *afinfo;
rv = xfrm_policy_init(net);
if (rv < 0)
goto out_policy;
+ xfrm_dst_ops_init(net);
rv = xfrm_sysctl_init(net);
if (rv < 0)
goto out_sysctl;
}
EXPORT_SYMBOL(xfrm_state_flush);
-void xfrm_sad_getinfo(struct xfrmk_sadinfo *si)
+void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
{
spin_lock_bh(&xfrm_state_lock);
- si->sadcnt = init_net.xfrm.state_num;
- si->sadhcnt = init_net.xfrm.state_hmask;
+ si->sadcnt = net->xfrm.state_num;
+ si->sadhcnt = net->xfrm.state_hmask;
si->sadhmcnt = xfrm_state_hashmax;
spin_unlock_bh(&xfrm_state_lock);
}
+ nla_total_size(sizeof(struct xfrmu_spdhinfo));
}
-static int build_spdinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_spdinfo(struct sk_buff *skb, struct net *net,
+ u32 pid, u32 seq, u32 flags)
{
struct xfrmk_spdinfo si;
struct xfrmu_spdinfo spc;
f = nlmsg_data(nlh);
*f = flags;
- xfrm_spd_getinfo(&si);
+ xfrm_spd_getinfo(net, &si);
spc.incnt = si.incnt;
spc.outcnt = si.outcnt;
spc.fwdcnt = si.fwdcnt;
if (r_skb == NULL)
return -ENOMEM;
- if (build_spdinfo(r_skb, spid, seq, *flags) < 0)
+ if (build_spdinfo(r_skb, net, spid, seq, *flags) < 0)
BUG();
return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
+ nla_total_size(4); /* XFRMA_SAD_CNT */
}
-static int build_sadinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_sadinfo(struct sk_buff *skb, struct net *net,
+ u32 pid, u32 seq, u32 flags)
{
struct xfrmk_sadinfo si;
struct xfrmu_sadhinfo sh;
f = nlmsg_data(nlh);
*f = flags;
- xfrm_sad_getinfo(&si);
+ xfrm_sad_getinfo(net, &si);
sh.sadhmcnt = si.sadhmcnt;
sh.sadhcnt = si.sadhcnt;
if (r_skb == NULL)
return -ENOMEM;
- if (build_sadinfo(r_skb, spid, seq, *flags) < 0)
+ if (build_sadinfo(r_skb, net, spid, seq, *flags) < 0)
BUG();
return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
* block. A pointer to that is in the struct vfsmount that we
* have around.
*/
- if (!parent ) {
- if (mount && mount->mnt_sb) {
- parent = mount->mnt_sb->s_root;
- }
- }
- if (!parent) {
- pr_debug("securityfs: Ah! can not find a parent!\n");
- return -EFAULT;
- }
+ if (!parent)
+ parent = mount->mnt_sb->s_root;
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
}
+/* turn on/off EAPD control (only if available) */
+static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on)
+{
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ return;
+ if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ on ? 2 : 0);
+}
+
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
unsigned int tmp;
case ALC_INIT_DEFAULT:
switch (codec->vendor_id) {
case 0x10ec0260:
- snd_hda_codec_write(codec, 0x0f, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
- snd_hda_codec_write(codec, 0x10, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
+ set_eapd(codec, 0x0f, 1);
+ set_eapd(codec, 0x10, 1);
break;
case 0x10ec0262:
case 0x10ec0267:
case 0x10ec0268:
case 0x10ec0269:
+ case 0x10ec0270:
case 0x10ec0272:
case 0x10ec0660:
case 0x10ec0662:
case 0x10ec0663:
case 0x10ec0862:
case 0x10ec0889:
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
- snd_hda_codec_write(codec, 0x15, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
+ set_eapd(codec, 0x14, 1);
+ set_eapd(codec, 0x15, 1);
break;
}
switch (codec->vendor_id) {
#ifdef CONFIG_SND_HDA_POWER_SAVE
static void alc889_power_eapd(struct hda_codec *codec, int power)
{
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
- snd_hda_codec_write(codec, 0x15, 0,
- AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
+ set_eapd(codec, 0x14, power);
+ set_eapd(codec, 0x15, power);
}
#endif
.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
+ .const_channel_count = 6,
.num_mux_defs =
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+ spec->autocfg.speaker_pins[0] = 0x14;
}
static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
- .unsol_event = alc_automute_amp_unsol_event,
+ .unsol_event = alc_sku_unsol_event,
.setup = alc262_hp_t5735_setup,
- .init_hook = alc_automute_amp,
+ .init_hook = alc_inithook,
},
[ALC262_HP_RP5700] = {
.mixers = { alc262_hp_rp5700_mixer },
dac = 0x02;
break;
case 0x15:
+ case 0x21:
dac = 0x03;
break;
default:
struct i2c_client *i2c = codec->control_data;
int i;
u16 *reg_cache = codec->reg_cache;
- u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults),
+ u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
GFP_KERNEL);
/* Bring the codec back up to standby first to minimise pop/clicks */
for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
if (tmp_cache[i] != reg_cache[i])
snd_soc_write(codec, i, tmp_cache[i]);
+ kfree(tmp_cache);
} else {
dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
}
printf("%.102s\n", graph_dotted_line);
printf(" %-34s |", is_caller ? "Callsite": "Alloc Ptr");
- printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n");
+ printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n");
printf("%.102s\n", graph_dotted_line);
next = rb_first(root);
snprintf(buf, sizeof(buf), "%#Lx", addr);
printf(" %-34s |", buf);
- printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n",
+ printf(" %9llu/%-5lu | %9llu/%-5lu | %8lu | %8lu | %6.3f%%\n",
(unsigned long long)data->bytes_alloc,
(unsigned long)data->bytes_alloc / data->hit,
(unsigned long long)data->bytes_req,
setup_sorting(&alloc_sort, default_sort_order);
return __cmd_kmem();
- }
+ } else
+ usage_with_options(kmem_usage, kmem_options);
return 0;
}
static int process_comm_event(event_t *event, struct perf_session *session __used)
{
- pid_set_comm(event->comm.pid, event->comm.comm);
+ pid_set_comm(event->comm.tid, event->comm.comm);
return 0;
}
irqfd_shutdown(struct work_struct *work)
{
struct _irqfd *irqfd = container_of(work, struct _irqfd, shutdown);
+ u64 cnt;
/*
* Synchronize with the wait-queue and unhook ourselves to prevent
* further events.
*/
- remove_wait_queue(irqfd->wqh, &irqfd->wait);
+ eventfd_ctx_remove_wait_queue(irqfd->eventfd, &irqfd->wait, &cnt);
/*
* We know no new events will be scheduled at this point, so block
static int
kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
{
- struct _irqfd *irqfd;
+ struct _irqfd *irqfd, *tmp;
struct file *file = NULL;
struct eventfd_ctx *eventfd = NULL;
int ret;
init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup);
init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc);
+ spin_lock_irq(&kvm->irqfds.lock);
+
+ ret = 0;
+ list_for_each_entry(tmp, &kvm->irqfds.items, list) {
+ if (irqfd->eventfd != tmp->eventfd)
+ continue;
+ /* This fd is used for another irq already. */
+ ret = -EBUSY;
+ spin_unlock_irq(&kvm->irqfds.lock);
+ goto fail;
+ }
+
events = file->f_op->poll(file, &irqfd->pt);
- spin_lock_irq(&kvm->irqfds.lock);
list_add_tail(&irqfd->list, &kvm->irqfds.items);
spin_unlock_irq(&kvm->irqfds.lock);
{
int r = -EINVAL;
int delta;
+ unsigned max_pin;
struct kvm_kernel_irq_routing_entry *ei;
struct hlist_node *n;
switch (ue->u.irqchip.irqchip) {
case KVM_IRQCHIP_PIC_MASTER:
e->set = kvm_set_pic_irq;
+ max_pin = 16;
break;
case KVM_IRQCHIP_PIC_SLAVE:
e->set = kvm_set_pic_irq;
+ max_pin = 16;
delta = 8;
break;
case KVM_IRQCHIP_IOAPIC:
+ max_pin = KVM_IOAPIC_NUM_PINS;
e->set = kvm_set_ioapic_irq;
break;
default:
}
e->irqchip.irqchip = ue->u.irqchip.irqchip;
e->irqchip.pin = ue->u.irqchip.pin + delta;
- if (e->irqchip.pin >= KVM_IOAPIC_NUM_PINS)
+ if (e->irqchip.pin >= max_pin)
goto out;
rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi;
break;
projects / mv-sheeva.git / commitdiff