+commit 011595307731a7a67a7445d107c279d031e8ab97
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sat Jul 14 01:06:58 2007 +0200
+
+ [PCS440EP] - fix compile error, if BUILD_DIR is used
+
+commit fad63407154f46246ce80d53a9c669a44362ac67
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 09:54:17 2007 +0200
+
+ make show_boot_progress () weak.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 907902472391b6ca1876ec300687562ecaf459b1
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 08:26:05 2007 +0200
+
+ [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 12 01:45:34 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fa1df308926a6f70e3504c57514ef27ac31fd13a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Jul 11 20:11:07 2007 +0200
+
+ CM1.QP1: Support for the Schindler CM1.QP1 board.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Wed Jul 11 18:39:11 2007 +0200
+
+ [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
+ - now the Flash ST M29W040B is supported (not tested)
+ - fix the "led" command
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 10 00:01:28 2007 +0200
+
+ Coding style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
Author: Wolfgang Denk <wd@denx.de>
Date: Fri Jul 6 02:50:19 2007 +0200
#########################################################################
LIST_5xxx=" \
- BC3450 cpci5200 EVAL5200 fo300 \
- icecube_5100 icecube_5200 lite5200b mcc200 \
- mecp5200 motionpro o2dnt pf5200 \
- PM520 TB5200 Total5100 Total5200 \
- Total5200_Rev2 TQM5200 TQM5200_B TQM5200S \
- v38b \
+ BC3450 cm1_qp1 cpci5200 EVAL5200 \
+ fo300 icecube_5100 icecube_5200 lite5200b \
+ mcc200 mecp5200 motionpro o2dnt \
+ pf5200 PM520 TB5200 Total5100 \
+ Total5200 Total5200_Rev2 TQM5200 TQM5200_B \
+ TQM5200S v38b \
"
#########################################################################
-d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
- ./tools/ubsha1 $(obj)u-boot.bin
+ $(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
+cm1_qp1_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring cm1_qp1,$@)" ] || \
+ { echo "... with 64 MByte SDRAM" ; \
+ echo "... with 32 MByte Flash" ; \
+ }
+ @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
--- /dev/null
+#
+# (C) Copyright 2003-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o cmd_cm1_qp1.o fwupdate.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#ifdef CONFIG_OF_FLAT_TREE
+#include <ft_build.h>
+#endif /* CONFIG_OF_FLAT_TREE */
+
+#include "fwupdate.h"
+
+#ifndef CFG_RAMBOOT
+/*
+ * Helper function to initialize SDRAM controller.
+ */
+static void sdram_start(int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
+ hi_addr_bit;
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
+ hi_addr_bit;
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* auto refresh, second time */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+}
+#endif /* CFG_RAMBOOT */
+
+/*
+ * Initalize SDRAM - configure SDRAM controller, detect memory size.
+ */
+long int initdram(int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* configure SDRAM start/end for detection */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else
+ dramsize = test2;
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+#else /* CFG_RAMBOOT */
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13)
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ else
+ dramsize = 0;
+#endif /* CFG_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
+ * the MPC5200B User's Manual.
+ */
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+
+ return dramsize;
+}
+
+
+int checkboard(void)
+{
+ puts("Board: CM1.QP1\n");
+ return 0;
+}
+
+
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write access for detection
+ * process. Note that CS_BOOT cannot be cleared when executing in
+ * flash.
+ */
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ return 0;
+}
+
+
+#ifdef CONFIG_POST
+int post_hotkeys_pressed(void)
+{
+ return 0;
+}
+#endif /* CONFIG_POST */
+
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+void post_word_store(ulong a)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ *save_addr = a;
+}
+
+
+ulong post_word_load(void)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ return *save_addr;
+}
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
+
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ uchar buf[6];
+ char str[18];
+
+ /* Read ethaddr from EEPROM */
+ if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+ sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ /* Check if MAC addr is owned by Schindler */
+ if (strstr(str, "00:06:C3") != str) {
+ printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
+ " in EEPROM.\n", str);
+ printf(LOG_PREFIX "Using MAC from environment\n");
+ } else {
+ printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
+ str);
+ setenv("ethaddr", str);
+ }
+ } else {
+ printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
+ " device at address %02X:%04X\n", CFG_I2C_EEPROM,
+ CONFIG_MAC_OFFSET);
+ printf(LOG_PREFIX "Using MAC from environment\n");
+ }
+ return 0;
+#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+
+#ifdef CONFIG_LAST_STAGE_INIT
+int last_stage_init(void)
+{
+#ifdef CONFIG_USB_STORAGE
+ cm1_fwupdate();
+#endif /* CONFIG_USB_STORAGE */
+ return 0;
+}
+#endif /* CONFIG_LAST_STAGE_INIT */
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
--- /dev/null
+/*
+ * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <usb.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+int do_i2c(char *argv[])
+{
+ unsigned char temp, temp1;
+
+ printf("Starting I2C Test\n"
+ "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ temp = 0xf0; /* set io 0-4 as output */
+ i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+
+ printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
+ "Press any key to stop\n\n");
+
+ while (!tstc()) {
+ i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+ temp1 = (temp >> 4) & 0x03;
+ temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
+ temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
+ temp = temp1;
+ i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+ }
+ getc();
+
+ return 0;
+}
+
+int do_usbtest(char *argv[])
+{
+ int i;
+ static int usb_stor_curr_dev = -1; /* current device */
+
+ printf("Starting USB Test\n"
+ "Please insert USB Memmory Stick\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ usb_stop();
+ printf("(Re)start USB...\n");
+ i = usb_init();
+#ifdef CONFIG_USB_STORAGE
+ /* try to recognize storage devices immediately */
+ if (i >= 0)
+ usb_stor_curr_dev = usb_stor_scan(1);
+#endif /* CONFIG_USB_STORAGE */
+ if (usb_stor_curr_dev >= 0)
+ printf("Found USB Storage Dev continue with Test...\n");
+ else {
+ printf("No USB Storage Device detected.. Stop Test\n");
+ return 1;
+ }
+
+ usb_stor_info();
+
+ printf("stopping USB..\n");
+ usb_stop();
+
+ return 0;
+}
+
+int do_led(char *argv[])
+{
+ int i = 0;
+ struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+ printf("Starting LED Test\n"
+ "Please set Switch S500 all off\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ /* configure timer 2-3 for simple GPIO output High */
+ gpt->gpt2.emsr |= 0x00000034;
+ gpt->gpt3.emsr |= 0x00000034;
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000;
+ (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000;
+ printf("Please press any key to stop\n\n");
+ while (!tstc()) {
+ if (i == 1) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+ gpt->gpt2.emsr &= ~0x00000010;
+ gpt->gpt3.emsr &= ~0x00000010;
+ } else if (i == 2) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+ gpt->gpt2.emsr &= ~0x00000010;
+ gpt->gpt3.emsr |= 0x00000010;
+ } else if (i >= 3) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+ gpt->gpt3.emsr &= ~0x00000010;
+ gpt->gpt2.emsr |= 0x00000010;
+ i = 0;
+ }
+ i++;
+ udelay(200000);
+ }
+ getc();
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+ gpt->gpt2.emsr |= 0x00000010;
+ gpt->gpt3.emsr |= 0x00000010;
+
+ return 0;
+}
+
+int do_rs232(char *argv[])
+{
+ int error_status = 0;
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
+
+ /* Configure PSC 2-3-6 as GPIO */
+ gpio->port_config &= 0xFF0FF80F;
+
+ switch (simple_strtoul(argv[2], NULL, 10)) {
+ case 1:
+ /* check RTS <-> CTS loop */
+ /* set rts to 0 */
+ printf("Uart 1 test: RX TX tested by using U-Boot\n"
+ "Please connect RTS with CTS on Uart1 plug\n\n"
+ "Press any key to start\n\n");
+ getc();
+
+ psc1->op1 |= 0x01;
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ /* check status at cts */
+ if ((psc1->ip & 0x01) != 0) {
+ error_status = 3;
+ printf("%s: failure at rs232_1, cts status is %d "
+ "(should be 0)\n",
+ __FUNCTION__, (psc1->ip & 0x01));
+ }
+
+ /* set rts to 1 */
+ psc1->op0 |= 0x01;
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ /* check status at cts */
+ if ((psc1->ip & 0x01) != 1) {
+ error_status = 3;
+ printf("%s: failure at rs232_1, cts status is %d "
+ "(should be 1)\n",
+ __FUNCTION__, (psc1->ip & 0x01));
+ }
+ break;
+ case 2:
+ /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */
+ printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0x000000F0);
+ gpio->simple_gpioe |= 0x000000F0;
+ gpio->simple_ddr &= ~(0x000000F0);
+ gpio->simple_ddr |= 0x00000050;
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 4);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000020) != 0x00000020) {
+ error_status = 2;
+ printf("%s: failure at rs232_2, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000020) >> 5);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 4);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000020) != 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_2, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000020) >> 5);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 6);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000080) != 0x00000080) {
+ error_status = 3;
+ printf("%s: failure at rs232_2, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000080) >> 7);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 6);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000080) != 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_2, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000080) >> 7);
+ }
+ break;
+ case 3:
+ /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */
+ printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0x00000F00);
+ gpio->simple_gpioe |= 0x00000F00;
+
+ gpio->simple_ddr &= ~(0x00000F00);
+ gpio->simple_ddr |= 0x00000500;
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 8);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000200) != 0x00000200) {
+ error_status = 2;
+ printf("%s: failure at rs232_3, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000200) >> 9);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 8);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000200) != 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_3, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000200) >> 9);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 10);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000800) != 0x00000800) {
+ error_status = 3;
+ printf("%s: failure at rs232_3, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000800) >> 11);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 10);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000800) != 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_3, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000800) >> 11);
+ }
+ break;
+ case 4:
+ /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */
+ printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0xF0000000);
+ gpio->simple_gpioe |= 0x30000000;
+
+ gpio->simple_ddr &= ~(0xf0000000);
+ gpio->simple_ddr |= 0x30000000;
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000;
+ (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000);
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 28);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+ 0x10000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_4, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x10000000) >> 28);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 28);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+ 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_4, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x10000000) >> 28);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 29);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+ 0x20000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_4, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x20000000) >> 29);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 29);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+ 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_4, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x20000000) >> 29);
+ }
+ break;
+ default:
+ printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]);
+ error_status = 1;
+ break;
+ }
+ gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+
+ return error_status;
+}
+
+int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int rcode = -1;
+
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "i2c", 3) == 0)
+ rcode = do_i2c(argv);
+ else if (strncmp(argv[1], "led", 3) == 0)
+ rcode = do_led(argv);
+ else if (strncmp(argv[1], "usb", 3) == 0)
+ rcode = do_usbtest(argv);
+ break;
+ case 3:
+ if (strncmp(argv[1], "rs232", 3) == 0)
+ rcode = do_rs232(argv);
+ break;
+ }
+
+ switch (rcode) {
+ case -1:
+ printf("Usage:\n"
+ "fkt { i2c | led | usb }\n"
+ "fkt rs232 number\n");
+ rcode = 1;
+ break;
+ case 0:
+ printf("Test passed\n");
+ break;
+ default:
+ printf("Test failed with code: %d\n", rcode);
+ }
+
+ return rcode;
+}
+
+U_BOOT_CMD(
+ fkt, 4, 1, cmd_fkt,
+ "fkt - Function test routines\n",
+ "i2c\n"
+ " - Test I2C communication\n"
+ "fkt led\n"
+ " - Test LEDs\n"
+ "fkt rs232 number\n"
+ " - Test RS232 (loopback plug(s) for RS232 required)\n"
+ "fkt usb\n"
+ " - Test USB communication\n"
+);
+#endif /* CFG_CMD_BSP */
--- /dev/null
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfc000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ * (C) Copyright 2007 Semihalf
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>:
+ * - code clean-up
+ * - bugfix for overwriting bootargs by user
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <image.h>
+#include <usb.h>
+#include <fat.h>
+
+#include "fwupdate.h"
+
+extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+extern long do_fat_read(const char *, void *, unsigned long, int);
+extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]);
+
+static int load_rescue_image(ulong);
+
+void cm1_fwupdate(void)
+{
+ cmd_tbl_t *bcmd;
+ char *rsargs;
+ char *tmp = NULL;
+ char ka[16];
+ char *argv[3] = { "bootm", ka, NULL };
+
+ /* Check if rescue system is disabled... */
+ if (getenv("norescue")) {
+ printf(LOG_PREFIX "Rescue System disabled.\n");
+ return;
+ }
+
+ /* Check if we have a USB storage device and load image */
+ if (load_rescue_image(LOAD_ADDR))
+ return;
+
+ bcmd = find_cmd("bootm");
+ if (!bcmd)
+ return;
+
+ sprintf(ka, "%lx", LOAD_ADDR);
+
+ /* prepare our bootargs */
+ rsargs = getenv("rs-args");
+ if (!rsargs)
+ rsargs = RS_BOOTARGS;
+ else {
+ tmp = malloc(strlen(rsargs+1));
+ if (!tmp) {
+ printf(LOG_PREFIX "Memory allocation failed\n");
+ return;
+ }
+ strcpy(tmp, rsargs);
+ rsargs = tmp;
+ }
+
+ setenv("bootargs", rsargs);
+
+ if (rsargs == tmp)
+ free(rsargs);
+
+ printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs);
+ do_bootm(bcmd, 0, 2, argv);
+}
+
+static int load_rescue_image(ulong addr)
+{
+ disk_partition_t info;
+ int devno;
+ int partno;
+ int i;
+ char fwdir[64];
+ char nxri[128];
+ char *tmp;
+ char dev[7];
+ char addr_str[16];
+ char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL };
+ block_dev_desc_t *stor_dev = NULL;
+ cmd_tbl_t *bcmd;
+
+ /* Get name of firmware directory */
+ tmp = getenv("fw-dir");
+
+ /* Copy it into fwdir */
+ strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir));
+ fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */
+
+ printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB"
+ " storage...\n", fwdir);
+ usb_stop();
+ if (usb_init() != 0)
+ return 1;
+
+ /* Check for storage device */
+ if (usb_stor_scan(1) != 0) {
+ usb_stop();
+ return 1;
+ }
+
+ /* Detect storage device */
+ for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) {
+ stor_dev = usb_stor_get_dev(devno);
+ if (stor_dev->type != DEV_TYPE_UNKNOWN)
+ break;
+ }
+ if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) {
+ printf(LOG_PREFIX "No valid storage device found...\n");
+ usb_stop();
+ return 1;
+ }
+
+ /* Detect partition */
+ for (partno = -1, i = 0; i < 6; i++) {
+ if (get_partition_info(stor_dev, i, &info) == 0) {
+ if (fat_register_device(stor_dev, i) == 0) {
+ /* Check if rescue image is present */
+ FW_DEBUG("Looking for firmware directory '%s'"
+ " on partition %d\n", fwdir, i);
+ if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) {
+ FW_DEBUG("No NX rescue image on "
+ "partition %d.\n", i);
+ } else {
+ partno = i;
+ FW_DEBUG("Partition %d contains "
+ "firmware directory\n", partno);
+ break;
+ }
+ }
+ }
+ }
+
+ if (partno == -1) {
+ printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n");
+ usb_stop();
+ return 1;
+ }
+
+ /* Load the rescue image */
+ bcmd = find_cmd("fatload");
+ if (!bcmd) {
+ printf(LOG_PREFIX "Error - 'fatload' command not present.\n");
+ usb_stop();
+ return 1;
+ }
+
+ tmp = getenv("nx-rescue-image");
+ sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE);
+ sprintf(dev, "%d:%d", devno, partno);
+ sprintf(addr_str, "%lx", addr);
+
+ FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n",
+ dev, addr_str, nxri);
+
+ if (do_fat_fsload(bcmd, 0, 5, argv) != 0) {
+ usb_stop();
+ return 1;
+ }
+
+ /* Stop USB */
+ usb_stop();
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FW_UPDATE_H
+#define __FW_UPDATE_H
+
+/* Default prefix for output messages */
+#define LOG_PREFIX "CM1: "
+
+/* Extra debug macro */
+#ifdef CONFIG_FWUPDATE_DEBUG
+#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt)
+#else
+#define FW_DEBUG(fmt...)
+#endif
+
+/* Name of the directory holding firmware images */
+#define FW_DIR "nx-fw"
+#define RESCUE_IMAGE "nxrs.img"
+#define LOAD_ADDR 0x400000
+#define RS_BOOTARGS "ramdisk=8192K"
+
+/* Main function for fwupdate */
+void cm1_fwupdate(void);
+
+#endif /* __FW_UPDATE_H */
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("ST Micro"); break;
case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
case FLASH_MAN_MX: printf ("MXIC "); break;
default: printf ("Unknown Vendor "); break;
break;
case FLASH_SST040: printf ("SST39LF/VF040 (4 Mbit, uniform sector size)\n");
break;
+ case STM_ID_M29W040B: printf ("ST Micro M29W040B (4 Mbit, uniform sector size)\n");
+ break;
default: printf ("Unknown Chip Type\n");
break;
}
case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
+ case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
info->flash_id = FLASH_MAN_EXCEL;
break;
info->sector_count = 8;
info->size = 0x0080000; /* => 0.5 MB */
break;
+ case (CFG_FLASH_WORD_SIZE)STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 0,5 MB */
+ break;
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
/* set all LED which are on, to state BLINKING */
for (i = 0; i < 4; i++) {
- if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING);
- val = val << 1;
+ if (val & 0x01) status_led_set (3 - i, STATUS_LED_BLINKING);
+ else status_led_set (3 - i, STATUS_LED_OFF);
+ val = val >> 1;
}
}
status_led_set (1, STATUS_LED_ON);
status_led_set (2, STATUS_LED_ON);
break;
+#if 0
case 64:
/* starting Ethernet configuration */
status_led_set (0, STATUS_LED_OFF);
status_led_set (1, STATUS_LED_OFF);
status_led_set (2, STATUS_LED_ON);
break;
+#endif
case 80:
/* loading Image */
status_led_set (0, STATUS_LED_ON);
}
/* Env doesnt exist -> hang */
status_led_blink ();
- hang ();
+ /* here we do this "handy" because we have no interrupts
+ at this time */
+ puts ("### EEPROM ERROR ### Please RESET the board ###\n");
+ for (;;) {
+ __led_toggle (12);
+ udelay (100000);
+ }
return;
}
int ret;
char *cs_test;
+ status_led_set (0, STATUS_LED_OFF);
+ status_led_set (1, STATUS_LED_OFF);
+ status_led_set (2, STATUS_LED_ON);
ret = pcs440ep_sha1 (1);
if (ret == 0) return;
if ((cs_test = getenv ("cs_test")) == NULL) {
/* Env doesnt exist -> hang */
status_led_blink ();
- hang ();
+ /* here we do this "handy" because we have no interrupts
+ at this time */
+ puts ("### SHA1 ERROR ### Please RESET the board ###\n");
+ for (;;) {
+ __led_toggle (2);
+ udelay (100000);
+ }
}
if (strncmp (cs_test, "off", 3) == 0) {
status_led_set (1, STATUS_LED_ON);
/* we cannot use hang() because we are still running from
Flash, and so the status_led driver is not initialized */
- puts ("### ERROR ### Please RESET the board ###\n");
+ puts ("### SDRAM ERROR ### Please RESET the board ###\n");
for (;;) {
__led_toggle (4);
udelay (100000);
************************************************************************/
int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- int rcode = 0;
+ int rcode = 0, i;
ulong pattern = 0;
- pattern = simple_strtoul (argv[1], NULL, 10);
- if (pattern > 200) {
+ pattern = simple_strtoul (argv[1], NULL, 16);
+ if (pattern > 0x400) {
+ int val = GET_LEDS;
+ printf ("led: %x\n", val);
+ return rcode;
+ }
+ if (pattern > 0x200) {
status_led_blink ();
hang ();
return rcode;
}
- if (pattern > 100) {
+ if (pattern > 0x100) {
status_led_blink ();
return rcode;
}
pattern &= 0x0f;
- set_leds (pattern);
+ for (i = 0; i < 4; i++) {
+ if (pattern & 0x01) status_led_set (i, STATUS_LED_ON);
+ else status_led_set (i, STATUS_LED_OFF);
+ pattern = pattern >> 1;
+ }
return rcode;
}
U_BOOT_CMD(
led, 2, 1, do_led,
- "led - set the led\n",
- NULL
+ "led [bitmask] - set the DIAG-LED\n",
+ "[bitmask] 0x01 = DIAG 1 on\n"
+ " 0x02 = DIAG 2 on\n"
+ " 0x04 = DIAG 3 on\n"
+ " 0x08 = DIAG 4 on\n"
+ " > 0x100 set the LED, who are on, to state blinking\n"
);
#if defined(CONFIG_SHA1_CHECK_UB_IMG)
#include <hush.h>
#endif
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#ifdef CFG_INIT_RAM_LOCK
#include <asm/cache.h>
#endif
addr = simple_strtoul(argv[1], NULL, 16);
}
- SHOW_BOOT_PROGRESS (1);
+ show_boot_progress (1);
printf ("## Booting image at %08lx ...\n", addr);
/* Copy header so we can blank CRC field for re-calculation */
#endif /* __I386__ */
{
puts ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-1);
+ show_boot_progress (-1);
return 1;
}
}
- SHOW_BOOT_PROGRESS (2);
+ show_boot_progress (2);
data = (ulong)&header;
len = sizeof(image_header_t);
if (crc32 (0, (uchar *)data, len) != checksum) {
puts ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-2);
+ show_boot_progress (-2);
return 1;
}
- SHOW_BOOT_PROGRESS (3);
+ show_boot_progress (3);
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash(addr)){
puts (" Verifying Checksum ... ");
if (crc32 (0, (uchar *)data, len) != ntohl(hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-3);
+ show_boot_progress (-3);
return 1;
}
puts ("OK\n");
}
- SHOW_BOOT_PROGRESS (4);
+ show_boot_progress (4);
len_ptr = (ulong *)data;
#endif
{
printf ("Unsupported Architecture 0x%x\n", hdr->ih_arch);
- SHOW_BOOT_PROGRESS (-4);
+ show_boot_progress (-4);
return 1;
}
- SHOW_BOOT_PROGRESS (5);
+ show_boot_progress (5);
switch (hdr->ih_type) {
case IH_TYPE_STANDALONE:
data += 4;
break;
default: printf ("Wrong Image Type for %s command\n", cmdtp->name);
- SHOW_BOOT_PROGRESS (-5);
+ show_boot_progress (-5);
return 1;
}
- SHOW_BOOT_PROGRESS (6);
+ show_boot_progress (6);
/*
* We have reached the point of no return: we are going to
if (gunzip ((void *)ntohl(hdr->ih_load), unc_len,
(uchar *)data, &len) != 0) {
puts ("GUNZIP ERROR - must RESET board to recover\n");
- SHOW_BOOT_PROGRESS (-6);
+ show_boot_progress (-6);
do_reset (cmdtp, flag, argc, argv);
}
break;
CFG_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
- SHOW_BOOT_PROGRESS (-6);
+ show_boot_progress (-6);
udelay(100000);
do_reset (cmdtp, flag, argc, argv);
}
if (iflag)
enable_interrupts();
printf ("Unimplemented compression type %d\n", hdr->ih_comp);
- SHOW_BOOT_PROGRESS (-7);
+ show_boot_progress (-7);
return 1;
}
puts ("OK\n");
- SHOW_BOOT_PROGRESS (7);
+ show_boot_progress (7);
switch (hdr->ih_type) {
case IH_TYPE_STANDALONE:
if (iflag)
enable_interrupts();
printf ("Can't boot image type %d\n", hdr->ih_type);
- SHOW_BOOT_PROGRESS (-8);
+ show_boot_progress (-8);
return 1;
}
- SHOW_BOOT_PROGRESS (8);
+ show_boot_progress (8);
switch (hdr->ih_os) {
default: /* handled by (original) Linux case */
#endif
}
- SHOW_BOOT_PROGRESS (-9);
+ show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
do_reset (cmdtp, flag, argc, argv);
#endif
if (argc >= 3) {
debug ("Not skipping initrd\n");
- SHOW_BOOT_PROGRESS (9);
+ show_boot_progress (9);
addr = simple_strtoul(argv[2], NULL, 16);
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
puts ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-10);
+ show_boot_progress (-10);
do_reset (cmdtp, flag, argc, argv);
}
if (crc32 (0, (uchar *)data, len) != checksum) {
puts ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-11);
+ show_boot_progress (-11);
do_reset (cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS (10);
+ show_boot_progress (10);
print_image_hdr (hdr);
if (csum != ntohl(hdr->ih_dcrc)) {
puts ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-12);
+ show_boot_progress (-12);
do_reset (cmdtp, flag, argc, argv);
}
puts ("OK\n");
}
- SHOW_BOOT_PROGRESS (11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_PPC) ||
(hdr->ih_type != IH_TYPE_RAMDISK) ) {
puts ("No Linux PPC Ramdisk Image\n");
- SHOW_BOOT_PROGRESS (-13);
+ show_boot_progress (-13);
do_reset (cmdtp, flag, argc, argv);
}
u_long tail = ntohl(len_ptr[0]) % 4;
int i;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong)(&len_ptr[2]);
/*
* no initrd image
*/
- SHOW_BOOT_PROGRESS (14);
+ show_boot_progress (14);
len = data = 0;
}
initrd_start = nsp;
}
- SHOW_BOOT_PROGRESS (12);
+ show_boot_progress (12);
debug ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n",
data, data + len - 1, len, len);
debug ("## Transferring control to Linux (at address %08lx) ...\n",
(ulong)kernel);
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
unlock_ram_in_cache();
printf ("## Transferring control to NetBSD stage-2 loader (at address %08lx) ...\n",
(ulong)loader);
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
/*
* NetBSD Stage-2 Loader Parameters:
printf ("## Transferring control to RTEMS (at address %08lx) ...\n",
(ulong)entry_point);
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
/*
* RTEMS Parameters:
#include <malloc.h>
#include <asm/io.h>
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#include <linux/mtd/nftl.h>
image_header_t *hdr;
int rcode = 0;
- SHOW_BOOT_PROGRESS (34);
+ show_boot_progress (34);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-35);
+ show_boot_progress (-35);
return 1;
}
- SHOW_BOOT_PROGRESS (35);
+ show_boot_progress (35);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-36);
+ show_boot_progress (-36);
return 1;
}
- SHOW_BOOT_PROGRESS (36);
+ show_boot_progress (36);
dev = simple_strtoul(boot_device, &ep, 16);
if ((dev >= CFG_MAX_DOC_DEVICE) ||
(doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-37);
+ show_boot_progress (-37);
return 1;
}
- SHOW_BOOT_PROGRESS (37);
+ show_boot_progress (37);
printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n",
dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr,
if (doc_rw (doc_dev_desc + dev, 1, offset,
SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-38);
+ show_boot_progress (-38);
return 1;
}
- SHOW_BOOT_PROGRESS (38);
+ show_boot_progress (38);
hdr = (image_header_t *)addr;
cnt -= SECTORSIZE;
} else {
puts ("\n** Bad Magic Number **\n");
- SHOW_BOOT_PROGRESS (-39);
+ show_boot_progress (-39);
return 1;
}
- SHOW_BOOT_PROGRESS (39);
+ show_boot_progress (39);
if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt,
NULL, (u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-40);
+ show_boot_progress (-40);
return 1;
}
- SHOW_BOOT_PROGRESS (40);
+ show_boot_progress (40);
/* Loading ok, update default load address */
#endif
#endif
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#ifdef CONFIG_IDE_8xx_DIRECT
DECLARE_GLOBAL_DATA_PTR;
#endif
image_header_t *hdr;
int rcode = 0;
- SHOW_BOOT_PROGRESS (41);
+ show_boot_progress (41);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-42);
+ show_boot_progress (-42);
return 1;
}
- SHOW_BOOT_PROGRESS (42);
+ show_boot_progress (42);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-43);
+ show_boot_progress (-43);
return 1;
}
- SHOW_BOOT_PROGRESS (43);
+ show_boot_progress (43);
dev = simple_strtoul(boot_device, &ep, 16);
if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-44);
+ show_boot_progress (-44);
return 1;
}
- SHOW_BOOT_PROGRESS (44);
+ show_boot_progress (44);
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
- SHOW_BOOT_PROGRESS (-45);
+ show_boot_progress (-45);
return 1;
}
part = simple_strtoul(++ep, NULL, 16);
}
- SHOW_BOOT_PROGRESS (45);
+ show_boot_progress (45);
if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
- SHOW_BOOT_PROGRESS (-46);
+ show_boot_progress (-46);
return 1;
}
- SHOW_BOOT_PROGRESS (46);
+ show_boot_progress (46);
if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
(strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
- SHOW_BOOT_PROGRESS (-47);
+ show_boot_progress (-47);
return 1;
}
- SHOW_BOOT_PROGRESS (47);
+ show_boot_progress (47);
printf ("\nLoading from IDE device %d, partition %d: "
"Name: %.32s Type: %.32s\n",
if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) {
printf ("** Read error on %d:%d\n", dev, part);
- SHOW_BOOT_PROGRESS (-48);
+ show_boot_progress (-48);
return 1;
}
- SHOW_BOOT_PROGRESS (48);
+ show_boot_progress (48);
hdr = (image_header_t *)addr;
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
printf("\n** Bad Magic Number **\n");
- SHOW_BOOT_PROGRESS (-49);
+ show_boot_progress (-49);
return 1;
}
- SHOW_BOOT_PROGRESS (49);
+ show_boot_progress (49);
checksum = ntohl(hdr->ih_hcrc);
hdr->ih_hcrc = 0;
if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
puts ("\n** Bad Header Checksum **\n");
- SHOW_BOOT_PROGRESS (-50);
+ show_boot_progress (-50);
return 1;
}
- SHOW_BOOT_PROGRESS (50);
+ show_boot_progress (50);
hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
print_image_hdr (hdr);
if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt,
(ulong *)(addr+info.blksz)) != cnt) {
printf ("** Read error on %d:%d\n", dev, part);
- SHOW_BOOT_PROGRESS (-51);
+ show_boot_progress (-51);
return 1;
}
- SHOW_BOOT_PROGRESS (51);
+ show_boot_progress (51);
/* Loading ok, update default load address */
#include <watchdog.h>
#include <malloc.h>
#include <asm/byteorder.h>
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#include <jffs2/jffs2.h>
#include <nand.h>
r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-56);
+ show_boot_progress (-56);
return 1;
}
- SHOW_BOOT_PROGRESS(56);
+ show_boot_progress (56);
hdr = (image_header_t *) addr;
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
- SHOW_BOOT_PROGRESS(-57);
+ show_boot_progress (-57);
return 1;
}
- SHOW_BOOT_PROGRESS(57);
+ show_boot_progress (57);
print_image_hdr(hdr);
r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-58);
+ show_boot_progress (-58);
return 1;
}
- SHOW_BOOT_PROGRESS(58);
+ show_boot_progress (58);
/* Loading ok, update default load address */
}
#endif
- SHOW_BOOT_PROGRESS(52);
+ show_boot_progress(52);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
usage:
#endif
printf("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS(-53);
+ show_boot_progress(-53);
return 1;
}
- SHOW_BOOT_PROGRESS(53);
+ show_boot_progress(53);
if (!boot_device) {
puts("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS(-54);
+ show_boot_progress(-54);
return 1;
}
- SHOW_BOOT_PROGRESS(54);
+ show_boot_progress(54);
idx = simple_strtoul(boot_device, NULL, 16);
if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
printf("\n** Device %d not available\n", idx);
- SHOW_BOOT_PROGRESS(-55);
+ show_boot_progress(-55);
return 1;
}
- SHOW_BOOT_PROGRESS(55);
+ show_boot_progress(55);
return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
}
#include <asm/io.h>
#include <watchdog.h>
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
+#ifdef CONFIG_show_boot_progress
# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+# define show_boot_progress(arg) show_boot_progress(arg)
#else
-# define SHOW_BOOT_PROGRESS(arg)
+# define show_boot_progress(arg)
#endif
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
ulong offset = 0;
image_header_t *hdr;
int rcode = 0;
- SHOW_BOOT_PROGRESS(52);
+ show_boot_progress (52);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-53);
+ show_boot_progress (-53);
return 1;
}
- SHOW_BOOT_PROGRESS(53);
+ show_boot_progress (53);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-54);
+ show_boot_progress (-54);
return 1;
}
- SHOW_BOOT_PROGRESS(54);
+ show_boot_progress (54);
dev = simple_strtoul(boot_device, &ep, 16);
if ((dev >= CFG_MAX_NAND_DEVICE) ||
(nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-55);
+ show_boot_progress (-55);
return 1;
}
- SHOW_BOOT_PROGRESS(55);
+ show_boot_progress (55);
printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-56);
+ show_boot_progress (-56);
return 1;
}
- SHOW_BOOT_PROGRESS(56);
+ show_boot_progress (56);
hdr = (image_header_t *)addr;
cnt -= SECTORSIZE;
} else {
printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic));
- SHOW_BOOT_PROGRESS (-57);
+ show_boot_progress (-57);
return 1;
}
- SHOW_BOOT_PROGRESS(57);
+ show_boot_progress (57);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
offset + SECTORSIZE, cnt, NULL,
(u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-58);
+ show_boot_progress (-58);
return 1;
}
- SHOW_BOOT_PROGRESS(58);
+ show_boot_progress (58);
/* Loading ok, update default load address */
#if (CONFIG_COMMANDS & CFG_CMD_NET)
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-extern void show_boot_progress (int val);
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
static int netboot_common (proto_t, cmd_tbl_t *, int , char *[]);
break;
default: printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS(-80);
+ show_boot_progress (-80);
return 1;
}
- SHOW_BOOT_PROGRESS(80);
+ show_boot_progress (80);
if ((size = NetLoop(proto)) < 0) {
- SHOW_BOOT_PROGRESS(-81);
+ show_boot_progress (-81);
return 1;
}
- SHOW_BOOT_PROGRESS(81);
+ show_boot_progress (81);
/* NetLoop ok, update environment */
netboot_update_env();
/* done if no file was loaded (no errors though) */
if (size == 0) {
- SHOW_BOOT_PROGRESS(-82);
+ show_boot_progress (-82);
return 0;
}
printf ("Automatic boot of image at addr 0x%08lX ...\n",
load_addr);
- SHOW_BOOT_PROGRESS(82);
+ show_boot_progress (82);
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
#ifdef CONFIG_AUTOSCRIPT
if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
- SHOW_BOOT_PROGRESS(83);
+ show_boot_progress (83);
rcode = autoscript (load_addr);
}
#endif
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
if (rcode < 0)
- SHOW_BOOT_PROGRESS(-83);
+ show_boot_progress (-83);
else
- SHOW_BOOT_PROGRESS(84);
-#endif
+ show_boot_progress (84);
return rcode;
}
#include <linux/stddef.h>
#include <malloc.h>
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_AMIGAONEG3SE
puts ("Using default environment\n\n");
#else
puts ("*** Warning - bad CRC, using default environment\n\n");
- SHOW_BOOT_PROGRESS (-60);
+ show_boot_progress (-60);
#endif
if (sizeof(default_environment) > ENV_SIZE)
DECLARE_GLOBAL_DATA_PTR;
#endif
+/*
+ * Board-specific Platform code can reimplement show_boot_progress () if needed
+ */
+void inline __show_boot_progress (int val) {}
+void inline show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
+
#if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY)
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* for do_reset() prototype */
#endif
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
-#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
- defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
- defined(CONFIG_JUPITER) || defined(CONFIG_MCC200) || \
- defined(CONFIG_MOTIONPRO)|| defined(CONFIG_O2DNT) || \
- defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || defined(CONFIG_UC101) || \
- defined(CONFIG_V38B)
+#if defined(CONFIG_CANMB) || \
+ defined(CONFIG_CM1_QP1) || \
+ defined(CONFIG_HMI1001) || \
+ defined(CONFIG_ICECUBE) || \
+ defined(CONFIG_INKA4X0) || \
+ defined(CONFIG_JUPITER) || \
+ defined(CONFIG_MCC200) || \
+ defined(CONFIG_MOTIONPRO) || \
+ defined(CONFIG_O2DNT) || \
+ defined(CONFIG_PM520) || \
+ defined(CONFIG_TOP5200) || \
+ defined(CONFIG_TQM5200) || \
+ defined(CONFIG_UC101) || \
+ defined(CONFIG_V38B)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
*/
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {
-//printf("bank enabled base:%x\n", &membase[j]);
+ /* printf("bank enabled base:%x\n", &membase[j]); */
membase[j] = test[i][j];
ppcDcbf((unsigned long)&(membase[j]));
}
--- /dev/null
+SHA1 usage:
+-----------
+
+In the U-Boot Image for the pcs440ep board is a SHA1 checksum integrated.
+This SHA1 sum is used, to check, if the U-Boot Image in Flash is not
+corrupted.
+
+The following command is available:
+
+=> help sha1
+sha1 address len [addr] calculate the SHA1 sum [save at addr]
+ -p calculate the SHA1 sum from the U-Boot image in flash and print
+ -c check the U-Boot image in flash
+
+"sha1 -p"
+ calculates and prints the SHA1 sum, from the Image stored in Flash
+
+"sha1 -c"
+ check, if the SHA1 sum from the Image stored in Flash is correct
+
+
+It is possible to calculate a SHA1 checksum from a memoryrange with:
+
+"sha1 address len"
+
+If you want to store a new Image in Flash for the pcs440ep board,
+which has no SHA1 sum, you can do the following:
+
+a) cp the new Image on a position in RAM (here 0x300000)
+ (for this example we use the Image from Flash, stored at 0xfffa0000 and
+ 0x60000 Bytes long)
+
+"cp.b fffa0000 300000 60000"
+
+b) Initialize the SHA1 sum in the Image with 0x00
+ The SHA1 sum is stored in Flash at:
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
+ for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20
+ = 0xffffffe0
+ for the example in RAM: 0x300000 + 0x60000 + -0x20
+ = 0x35ffe0
+
+ note: a SHA1 checksum is 20 bytes long.
+
+"mw.b 35ffe0 0 14"
+
+c) now calculate the SHA1 sum from the memoryrange and write
+ the calculated checksum at the right place:
+
+"sha1 300000 60000 35ffe0"
+
+Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
+
+If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
+the correct SHA1 sum will be automagically included in the U-Boot image.
+
+Heiko Schocher, 11 Jul 2007
#include <asm/io.h>
#include <watchdog.h>
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY)
#include <linux/mtd/nand_legacy.h>
int pcmcia_init (void);
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress (int status);
+#ifdef CONFIG_STATUS_LED
+# include <status_led.h>
#endif
+/*
+ * Board-specific Platform code can reimplement show_boot_progress () if needed
+ */
+void inline show_boot_progress (int val);
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */
+
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_I2C | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_USB | \
+ CFG_CMD_FAT | \
+ CFG_CMD_JFFS2)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */
+/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CONFIG_MISC_INIT_R 1
+#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */
+
+
+/*
+ * POST support
+ */
+#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+/* List of I2C addresses to be verified by POST */
+#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
+
+
+/* display image timestamps */
+#define CONFIG_TIMESTAMP 1
+
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
+ "echo"
+#undef CONFIG_BOOTARGS
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=cm1_qp1\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.33\0" \
+ "serverip=192.168.1.1\0" \
+ "gatewayip=192.168.1.1\0" \
+ "console=ttyPSC0\0" \
+ "u-boot_addr=100000\0" \
+ "kernel_addr=200000\0" \
+ "kernel_addr_flash=fc0c0000\0" \
+ "fdt_addr=400000\0" \
+ "fdt_addr_flash=fc0a0000\0" \
+ "ramdisk_addr=500000\0" \
+ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
+ "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \
+ "bootfile=/tftpboot/cm1_qp1/uImage\0" \
+ "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \
+ "cp.b ${u-boot_addr} fc000000 ${filesize}; " \
+ "prot on fc000000 fc05ffff\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
+ "flash_flash=run flashargs addinit addip addcons;" \
+ "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \
+ "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \
+ "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \
+ "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_flash"
+
+
+/*
+ * Low level configuration
+ */
+
+
+/*
+ * Clock configuration
+ */
+#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */
+#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */
+
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_LOWBOOT 1
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT 1
+#endif
+
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */
+/* use board_early_init_r to enable flash write in CS_BOOT */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/* Flash memory addressing */
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* No burst, dead cycle = 1 for CS0 (Flash) */
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x00000001
+
+
+/*
+ * SDRAM configuration
+ * settings for k4s561632E-xx75, assuming XLB = 132 MHz
+ */
+#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */
+#define SDRAM_CONTROL 0x514F0000
+#define SDRAM_CONFIG1 0xE2333900
+#define SDRAM_CONFIG2 0x8EE70000
+
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE TEXT_BASE
+/* we need these despite using CFI */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
+#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
+
+
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE 1
+#define MTDIDS_DEFAULT "nor0=cm1qp1-0"
+#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \
+ "384k(uboot),128k(env)," \
+ "128k(redund_env),128k(dtb)," \
+ "2m(kernel),27904k(rootfs)," \
+ "-(config)"
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 */
+#define CFG_I2C_SPEED 40000 /* 40 kHz */
+#define CFG_I2C_SLAVE 0x0
+#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
+#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */
+
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+/* Partitions (for USB) */
+#define CONFIG_MAC_PARTITION 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_ISO_PARTITION 1
+
+/*
+ * Invoke our last_stage_init function - needed by fwupdate
+ */
+#define CONFIG_LAST_STAGE_INIT 1
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+
+/*
+ * Pin multiplexing configuration
+ */
+
+/*
+ * CS1/GPIO_WKUP_6: GPIO (default)
+ * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
+ * IRDA/PSC6: UART
+ * Ether: Ethernet 100Mbit with MD
+ * PCI_DIS: PCI controller disabled
+ * USB: USB
+ * PSC3: SPI with UART3
+ * PSC2: UART
+ * PSC1: UART
+ */
+#define CFG_GPS_PORT_CONFIG 0x10559C44
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_ALT_MEMTEST 1
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */
+
+#define CONFIG_LOOPW 1
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */
+
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Flat Device Tree support
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
+#endif /* __CONFIG_H */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */
#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
#define STATUS_LED_STATE STATUS_LED_OFF
-#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */
#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
#define STATUS_LED_STATE1 STATUS_LED_ON
-#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */
#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */
#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
#define STATUS_LED_STATE3 STATUS_LED_OFF
static struct tag *params;
#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern image_header_t header; /* from cmd_bootm.c */
* Check if there is an initrd image
*/
if (argc >= 3) {
- SHOW_BOOT_PROGRESS (9);
+ show_boot_progress (9);
addr = simple_strtoul (argv[2], NULL, 16);
if (ntohl (hdr->ih_magic) != IH_MAGIC) {
printf ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-10);
+ show_boot_progress (-10);
do_reset (cmdtp, flag, argc, argv);
}
if (crc32 (0, (unsigned char *) data, len) != checksum) {
printf ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-11);
+ show_boot_progress (-11);
do_reset (cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS (10);
+ show_boot_progress (10);
print_image_hdr (hdr);
csum = crc32 (0, (unsigned char *) data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-12);
+ show_boot_progress (-12);
do_reset (cmdtp, flag, argc, argv);
}
printf ("OK\n");
}
- SHOW_BOOT_PROGRESS (11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_ARM) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
printf ("No Linux ARM Ramdisk Image\n");
- SHOW_BOOT_PROGRESS (-13);
+ show_boot_progress (-13);
do_reset (cmdtp, flag, argc, argv);
}
ulong tail = ntohl (len_ptr[0]) % 4;
int i;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
/*
* no initrd image
*/
- SHOW_BOOT_PROGRESS (14);
+ show_boot_progress (14);
len = data = 0;
}
initrd_end = 0;
}
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
debug ("## Transferring control to Linux (at address %08lx) ...\n",
(ulong) theKernel);
/* CPU-specific hook to allow flushing of caches, etc. */
extern void prepare_to_boot(void);
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern image_header_t header; /* from cmd_bootm.c */
static struct tag *setup_start_tag(struct tag *params)
* Check if there is an initrd image
*/
if (argc >= 3) {
- SHOW_BOOT_PROGRESS(9);
+ show_boot_progress (9);
addr = simple_strtoul(argv[2], NULL, 16);
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
puts("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS(-10);
+ show_boot_progress (-10);
do_reset(cmdtp, flag, argc, argv);
}
if (crc32(0, (unsigned char *)data, len) != checksum) {
puts("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS(-11);
+ show_boot_progress (-11);
do_reset(cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS(10);
+ show_boot_progress (10);
print_image_hdr(hdr);
csum = crc32(0, (unsigned char *)data, len);
if (csum != ntohl(hdr->ih_dcrc)) {
puts("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS(-12);
+ show_boot_progress (-12);
do_reset(cmdtp, flag, argc, argv);
}
puts("OK\n");
}
- SHOW_BOOT_PROGRESS(11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_AVR32) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
puts("Not a Linux/AVR32 RAMDISK image\n");
- SHOW_BOOT_PROGRESS(-13);
+ show_boot_progress (-13);
do_reset(cmdtp, flag, argc, argv);
}
} else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) {
ulong tail = ntohl (len_ptr[0]) % 4;
int i;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
len = ntohl (len_ptr[1]);
} else {
/* no initrd image */
- SHOW_BOOT_PROGRESS(14);
+ show_boot_progress (14);
len = data = 0;
}
initrd_end = 0;
}
- SHOW_BOOT_PROGRESS(15);
+ show_boot_progress (15);
params = params_start = (struct tag *)gd->bd->bi_boot_params;
params = setup_start_tag(params);
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-#include <status_led.h>
-#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-#define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */
#ifdef SHARED_RESOURCES
post_log("PASSED\n");
else {
post_log("FAILED\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
- show_boot_progress(-31);
-#endif
+ show_boot_progress (-31);
}
}
}
} else {
if ((*test->test) (flags) != 0) {
post_log("FAILED\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
- show_boot_progress(-32);
-#endif
+ show_boot_progress (-32);
} else
post_log("PASSED\n");
}
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern image_header_t header; /* from cmd_bootm.c */
extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
* Check if there is an initrd image
*/
if (argc >= 3) {
- SHOW_BOOT_PROGRESS (9);
+ show_boot_progress (9);
addr = simple_strtoul (argv[2], NULL, 16);
if (ntohl (hdr->ih_magic) != IH_MAGIC) {
printf ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-10);
+ show_boot_progress (-10);
do_reset (cmdtp, flag, argc, argv);
}
if (crc32 (0, (char *) data, len) != checksum) {
printf ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-11);
+ show_boot_progress (-11);
do_reset (cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS (10);
+ show_boot_progress (10);
print_image_hdr (hdr);
csum = crc32 (0, (char *) data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-12);
+ show_boot_progress (-12);
do_reset (cmdtp, flag, argc, argv);
}
printf ("OK\n");
}
- SHOW_BOOT_PROGRESS (11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_M68K) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
printf ("No Linux M68K Ramdisk Image\n");
- SHOW_BOOT_PROGRESS (-13);
+ show_boot_progress (-13);
do_reset (cmdtp, flag, argc, argv);
}
ulong tail = ntohl (len_ptr[0]) % 4;
int i;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
/*
* no initrd image
*/
- SHOW_BOOT_PROGRESS (14);
+ show_boot_progress (14);
data = 0;
}
initrd_end = 0;
}
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
#ifdef DEBUG
printf ("## Transferring control to Linux (at address %08lx) ...\n",
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern image_header_t header; /* from cmd_bootm.c */
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
/* Check if there is an initrd image */
if (argc >= 3) {
- SHOW_BOOT_PROGRESS (9);
+ show_boot_progress (9);
addr = simple_strtoul (argv[2], NULL, 16);
if (ntohl (hdr->ih_magic) != IH_MAGIC) {
printf ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-10);
+ show_boot_progress (-10);
do_reset (cmdtp, flag, argc, argv);
}
if (crc32 (0, (char *)data, len) != checksum) {
printf ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-11);
+ show_boot_progress (-11);
do_reset (cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS (10);
+ show_boot_progress (10);
print_image_hdr (hdr);
csum = crc32 (0, (char *)data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-12);
+ show_boot_progress (-12);
do_reset (cmdtp, flag, argc, argv);
}
printf ("OK\n");
}
- SHOW_BOOT_PROGRESS (11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_MICROBLAZE) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
printf ("No Linux Microblaze Ramdisk Image\n");
- SHOW_BOOT_PROGRESS (-13);
+ show_boot_progress (-13);
do_reset (cmdtp, flag, argc, argv);
}
} else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) {
ulong tail = ntohl (len_ptr[0]) % 4;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
/*
* no initrd image
*/
- SHOW_BOOT_PROGRESS (14);
+ show_boot_progress (14);
data = 0;
}
initrd_end = 0;
}
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
#ifdef DEBUG
printf ("## Transferring control to Linux (at address %08lx) ...\n",
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
extern image_header_t header; /* from cmd_bootm.c */
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
* Check if there is an initrd image
*/
if (argc >= 3) {
- SHOW_BOOT_PROGRESS (9);
+ show_boot_progress (9);
addr = simple_strtoul (argv[2], NULL, 16);
if (ntohl (hdr->ih_magic) != IH_MAGIC) {
printf ("Bad Magic Number\n");
- SHOW_BOOT_PROGRESS (-10);
+ show_boot_progress (-10);
do_reset (cmdtp, flag, argc, argv);
}
if (crc32 (0, (uchar *) data, len) != checksum) {
printf ("Bad Header Checksum\n");
- SHOW_BOOT_PROGRESS (-11);
+ show_boot_progress (-11);
do_reset (cmdtp, flag, argc, argv);
}
- SHOW_BOOT_PROGRESS (10);
+ show_boot_progress (10);
print_image_hdr (hdr);
csum = crc32 (0, (uchar *) data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
- SHOW_BOOT_PROGRESS (-12);
+ show_boot_progress (-12);
do_reset (cmdtp, flag, argc, argv);
}
printf ("OK\n");
}
- SHOW_BOOT_PROGRESS (11);
+ show_boot_progress (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_MIPS) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
printf ("No Linux MIPS Ramdisk Image\n");
- SHOW_BOOT_PROGRESS (-13);
+ show_boot_progress (-13);
do_reset (cmdtp, flag, argc, argv);
}
ulong tail = ntohl (len_ptr[0]) % 4;
int i;
- SHOW_BOOT_PROGRESS (13);
+ show_boot_progress (13);
/* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
/*
* no initrd image
*/
- SHOW_BOOT_PROGRESS (14);
+ show_boot_progress (14);
data = 0;
}
initrd_end = 0;
}
- SHOW_BOOT_PROGRESS (15);
+ show_boot_progress (15);
#ifdef DEBUG
printf ("## Transferring control to Linux (at address %08lx) ...\n",
void hang (void)
{
puts ("### ERROR ### Please RESET the board ###\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
show_boot_progress(-30);
-#endif
for (;;);
}
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-# include <status_led.h>
-extern void show_ethcfg_progress (int arg);
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
#ifdef CFG_GT_6426x
extern int gt6426x_eth_initialize(bd_t *bis);
#endif
eth_devices = NULL;
eth_current = NULL;
- SHOW_BOOT_PROGRESS(64);
+ show_boot_progress (64);
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_init();
#endif
if (!eth_devices) {
puts ("No ethernet found.\n");
- SHOW_BOOT_PROGRESS(-64);
+ show_boot_progress (-64);
} else {
struct eth_device *dev = eth_devices;
char *ethprime = getenv ("ethprime");
- SHOW_BOOT_PROGRESS(65);
+ show_boot_progress (65);
do {
if (eth_number)
puts (", ");
post_log ("PASSED\n");
else {
post_log ("FAILED\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
- show_boot_progress(-31);
-#endif
+ show_boot_progress (-31);
}
}
}
} else {
if ((*test->test) (flags) != 0) {
post_log ("FAILED\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
- show_boot_progress(-32);
-#endif
+ show_boot_progress (-32);
}
else
post_log ("PASSED\n");
projects / karo-tx-uboot.git / commitdiff