remember: "indent" is not a fix for bad programming.
- Chapter 10: Configuration-files
+ Chapter 10: Kconfig configuration files
-For configuration options (arch/xxx/Kconfig, and all the Kconfig files),
-somewhat different indentation is used.
+For all of the Kconfig* configuration files throughout the source tree,
+the indentation is somewhat different. Lines under a "config" definition
+are indented with one tab, while help text is indented an additional two
+spaces. Example:
-Help text is indented with 2 spaces.
-
-if CONFIG_EXPERIMENTAL
- tristate CONFIG_BOOM
- default n
- help
- Apply nitroglycerine inside the keyboard (DANGEROUS)
- bool CONFIG_CHEER
- depends on CONFIG_BOOM
- default y
+config AUDIT
+ bool "Auditing support"
+ depends on NET
help
- Output nice messages when you explode
-endif
+ Enable auditing infrastructure that can be used with another
+ kernel subsystem, such as SELinux (which requires this for
+ logging of avc messages output). Does not do system-call
+ auditing without CONFIG_AUDITSYSCALL.
+
+Features that might still be considered unstable should be defined as
+dependent on "EXPERIMENTAL":
+
+config SLUB
+ depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT
+ bool "SLUB (Unqueued Allocator)"
+ ...
+
+while seriously dangerous features (such as write support for certain
+filesystems) should advertise this prominently in their prompt string:
+
+config ADFS_FS_RW
+ bool "ADFS write support (DANGEROUS)"
+ depends on ADFS_FS
+ ...
-Generally, CONFIG_EXPERIMENTAL should surround all options not considered
-stable. All options that are known to trash data (experimental write-
-support for file-systems, for instance) should be denoted (DANGEROUS), other
-experimental options should be denoted (EXPERIMENTAL).
+For full documentation on the configuration files, see the file
+Documentation/kbuild/kconfig-language.txt.
Chapter 11: Data structures
--- /dev/null
+Generic Block Device Capability
+===============================================================================
+This file documents the sysfs file block/<disk>/capability
+
+capability is a hex word indicating which capabilities a specific disk
+supports. For more information on bits not listed here, see
+include/linux/genhd.h
+
+Capability Value
+-------------------------------------------------------------------------------
+GENHD_FL_MEDIA_CHANGE_NOTIFY 4
+ When this bit is set, the disk supports Asynchronous Notification
+ of media change events. These events will be broadcast to user
+ space via kernel uevent.
+
*.grp
*.gz
*.html
+*.i
*.jpeg
*.ko
*.log
*.lst
+*.moc
*.mod.c
*.o
*.orig
*.s
*.sgml
*.so
+*.symtypes
+*.tab.c
+*.tab.h
*.tex
*.ver
*.xml
*_vga16.c
*cscope*
*~
+*.9
+*.9.gz
.*
.cscope
53c700_d.h
+53c7xx_d.h
+53c7xx_u.h
53c8xx_d.h*
BitKeeper
COPYING
classlist.h*
comp*.log
compile.h*
+conf
config
config-*
config_data.h*
+config_data.gz*
conmakehash
consolemap_deftbl.c*
crc32table.h*
devlist.h*
docproc
dummy_sym.c*
+elf2ecoff
elfconfig.h*
filelist
fixdep
fore200e_mkfirm
fore200e_pca_fw.c*
+gconf
gen-devlist
gen-kdb_cmds.c*
gen_crc32table
gen_init_cpio
genksyms
gentbl
+*_gray256.c
ikconfig.h*
+initramfs_data.cpio
+initramfs_data.cpio.gz
initramfs_list
kallsyms
kconfig
keywords.c*
ksym.c*
ksym.h*
+kxgettext
+lkc_defs.h
lex.c*
+lex.*.c
+lk201-map.c
logo_*.c
logo_*_clut224.c
logo_*_mono.c
lxdialog
mach-types
mach-types.h
+machtypes.h
make_times_h
map
maui_boot.h
+mconf
+miboot*
mk_elfconfig
+mkboot
+mkbugboot
mkdep
+mkprep
mktables
+mktree
modpost
modversions.h*
offset.h
oui.c*
parse.c*
parse.h*
+patches*
+pca200e.bin
+pca200e_ecd.bin2
+piggy.gz
+piggyback
pnmtologo
ppc_defs.h*
promcon_tbl.c*
pss_boot.h
+qconf
raid6altivec*.c
raid6int*.c
raid6tables.c
+relocs
+series
setup
sim710_d.h*
+sImage
sm_tbl*
split-include
tags
+tftpboot.img
times.h*
tkparse
trix_boot.h
version.h*
vmlinux
vmlinux-*
+vmlinux.aout
vmlinux.lds
vsyscall.lds
wanxlfw.inc
uImage
-zImage
+unifdef
+zImage*
+zconf.hash.c
----------------------------
H. Peter Anvin <hpa@zytor.com>
- Last update 2007-05-16
+ Last update 2007-05-23
On the i386 platform, the Linux kernel uses a rather complicated boot
convention. This has evolved partially due to historical aspects, as
nonstandard address should fill in the fields marked (reloc); other
boot loaders can ignore those fields.
+The byte order of all fields is littleendian (this is x86, after all.)
+
Field name: setup_secs
Type: read
Offset/size: 0x1f1/1
Offset/size: 0x206/2
Protocol: 2.00+
- Contains the boot protocol version, e.g. 0x0204 for version 2.04.
+ Contains the boot protocol version, in (major << 8)+minor format,
+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
+ 10.17.
Field name: readmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
Protocol: 2.00+
- Boot loader hook (see separate chapter.)
+ Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
Field name: start_sys
Type: read
If set to a nonzero value, contains a pointer to a NUL-terminated
human-readable kernel version number string, less 0x200. This can
be used to display the kernel version to the user. This value
- should be less than (0x200*setup_sects). For example, if this value
- is set to 0x1c00, the kernel version number string can be found at
- offset 0x1e00 in the kernel file. This is a valid value if and only
- if the "setup_sects" field contains the value 14 or higher.
+ should be less than (0x200*setup_sects).
+
+ For example, if this value is set to 0x1c00, the kernel version
+ number string can be found at offset 0x1e00 in the kernel file.
+ This is a valid value if and only if the "setup_sects" field
+ contains the value 15 or higher, as:
+
+ 0x1c00 < 15*0x200 (= 0x1e00) but
+ 0x1c00 >= 14*0x200 (= 0x1c00)
+
+ 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15.
Field name: type_of_loader
Type: write (obligatory)
This field can be modified for two purposes:
- 1. as a boot loader hook (see separate chapter.)
+ 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
2. if a bootloader which does not install a hook loads a
relocatable kernel at a nonstandard address it will have to modify
a demand-loaded module!
-**** ADVANCED BOOT TIME HOOKS
+**** ADVANCED BOOT LOADER HOOKS
If the boot loader runs in a particularly hostile environment (such as
LOADLIN, which runs under DOS) it may be impossible to follow the
set them up to BOOT_DS (0x18) yourself.
After completing your hook, you should jump to the address
- that was in this field before your boot loader overwrote it.
+ that was in this field before your boot loader overwrote it
+ (relocated, if appropriate.)
1) the boot loader loads the kernel and the initial RAM disk
2) the kernel converts initrd into a "normal" RAM disk and
frees the memory used by initrd
- 3) initrd is mounted read-write as root
- 4) /linuxrc is executed (this can be any valid executable, including
+ 3) if the root device is not /dev/ram0, the old (deprecated)
+ change_root procedure is followed. see the "Obsolete root change
+ mechanism" section below.
+ 4) root device is mounted. if it is /dev/ram0, the initrd image is
+ then mounted as root
+ 5) /sbin/init is executed (this can be any valid executable, including
shell scripts; it is run with uid 0 and can do basically everything
- init can do)
- 5) linuxrc mounts the "real" root file system
- 6) linuxrc places the root file system at the root directory using the
+ init can do).
+ 6) init mounts the "real" root file system
+ 7) init places the root file system at the root directory using the
pivot_root system call
- 7) the usual boot sequence (e.g. invocation of /sbin/init) is performed
- on the root file system
- 8) the initrd file system is removed
+ 8) init execs the /sbin/init on the new root filesystem, performing
+ the usual boot sequence
+ 9) the initrd file system is removed
Note that changing the root directory does not involve unmounting it.
It is therefore possible to leave processes running on initrd during that
root=/dev/ram0
initrd is mounted as root, and the normal boot procedure is followed,
- with the RAM disk still mounted as root.
+ with the RAM disk mounted as root.
Compressed cpio images
----------------------
# mkdir /mnt/dev
# mknod /mnt/dev/console c 5 1
5) copy all the files that are needed to properly use the initrd
- environment. Don't forget the most important file, /linuxrc
- Note that /linuxrc's permissions must include "x" (execute).
+ environment. Don't forget the most important file, /sbin/init
+ Note that /sbin/init's permissions must include "x" (execute).
6) correct operation the initrd environment can frequently be tested
even without rebooting with the command
- # chroot /mnt /linuxrc
+ # chroot /mnt /sbin/init
This is of course limited to initrds that do not interfere with the
general system state (e.g. by reconfiguring network interfaces,
overwriting mounted devices, trying to start already running demons,
# gzip -9 initrd
For experimenting with initrd, you may want to take a rescue floppy and
-only add a symbolic link from /linuxrc to /bin/sh. Alternatively, you
+only add a symbolic link from /sbin/init to /bin/sh. Alternatively, you
can try the experimental newlib environment [2] to create a small
initrd.
with an older mechanism, the following boot command line parameters
have to be given:
- root=/dev/ram0 init=/linuxrc rw
+ root=/dev/ram0 rw
(rw is only necessary if writing to the initrd file system.)
With LOADLIN, you simply execute
LOADLIN <kernel> initrd=<disk_image>
-e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0
- init=/linuxrc rw
+e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0 rw
With LILO, you add the option INITRD=<path> to either the global section
or to the section of the respective kernel in /etc/lilo.conf, and pass
image = /bzImage
initrd = /boot/initrd.gz
- append = "root=/dev/ram0 init=/linuxrc rw"
+ append = "root=/dev/ram0 rw"
and run /sbin/lilo
Changing the root device
------------------------
-When finished with its duties, linuxrc typically changes the root device
+When finished with its duties, init typically changes the root device
and proceeds with starting the Linux system on the "real" root device.
The procedure involves the following steps:
# mkdir initrd
# pivot_root . initrd
-Now, the linuxrc process may still access the old root via its
+Now, the init process may still access the old root via its
executable, shared libraries, standard input/output/error, and its
current root directory. All these references are dropped by the
following command:
It is also possible to use initrd with an NFS-mounted root, see the
pivot_root(8) man page for details.
-Note: if linuxrc or any program exec'ed from it terminates for some
-reason, the old change_root mechanism is invoked (see section "Obsolete
-root change mechanism").
-
Usage scenarios
---------------
1) system boots from floppy or other media with a minimal kernel
(e.g. support for RAM disks, initrd, a.out, and the Ext2 FS) and
loads initrd
- 2) /linuxrc determines what is needed to (1) mount the "real" root FS
+ 2) /sbin/init determines what is needed to (1) mount the "real" root FS
(i.e. device type, device drivers, file system) and (2) the
distribution media (e.g. CD-ROM, network, tape, ...). This can be
done by asking the user, by auto-probing, or by using a hybrid
approach.
- 3) /linuxrc loads the necessary kernel modules
- 4) /linuxrc creates and populates the root file system (this doesn't
+ 3) /sbin/init loads the necessary kernel modules
+ 4) /sbin/init creates and populates the root file system (this doesn't
have to be a very usable system yet)
- 5) /linuxrc invokes pivot_root to change the root file system and
+ 5) /sbin/init invokes pivot_root to change the root file system and
execs - via chroot - a program that continues the installation
6) the boot loader is installed
7) the boot loader is configured to load an initrd with the set of
such cases, it is desirable to generate only a small set of kernels
(ideally only one) and to keep the system-specific part of configuration
information as small as possible. In this case, a common initrd could be
-generated with all the necessary modules. Then, only /linuxrc or a file
+generated with all the necessary modules. Then, only /sbin/init or a file
read by it would have to be different.
A third scenario are more convenient recovery disks, because information
the new, supported mechanism is called "pivot_root".
+Mixed change_root and pivot_root mechanism
+------------------------------------------
+
+In case you did not want to use root=/dev/ram0 to trig the pivot_root mechanism,
+you may create both /linuxrc and /sbin/init in your initrd image.
+
+/linuxrc would contain only the following:
+
+#! /bin/sh
+mount -n -t proc proc /proc
+echo 0x0100 >/proc/sys/kernel/real-root-dev
+umount -n /proc
+
+Once linuxrc exited, the kernel would mount again your initrd as root,
+this time executing /sbin/init. Again, it would be duty of this init
+to build the right environment (maybe using the root= device passed on
+the cmdline) before the final execution of the real /sbin/init.
+
+
Resources
---------
clocksource is not available, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
+ clocksource= [GENERIC_TIME] Override the default clocksource
+ Format: <string>
+ Override the default clocksource and use the clocksource
+ with the name specified.
+ Some clocksource names to choose from, depending on
+ the platform:
+ [all] jiffies (this is the base, fallback clocksource)
+ [ACPI] acpi_pm
+ [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
+ pxa_timer,timer3,32k_counter,timer0_1
+ [AVR32] avr32
+ [IA-32] pit,hpet,tsc,vmi-timer;
+ scx200_hrt on Geode; cyclone on IBM x440
+ [MIPS] MIPS
+ [PARISC] cr16
+ [S390] tod
+ [SH] SuperH
+ [SPARC64] tick
+ [X86-64] hpet,tsc
+
code_bytes [IA32] How many bytes of object code to print in an
oops report.
Range: 0 - 8192
time Show timing data prefixed to each printk message line
- clocksource= [GENERIC_TIME] Override the default clocksource
- Override the default clocksource and use the clocksource
- with the name specified.
-
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
(*) Explicit kernel barriers.
- Compiler barrier.
- - The CPU memory barriers.
+ - CPU memory barriers.
- MMIO write barrier.
(*) Implicit kernel memory barriers.
ordering over the memory operations on either side of the barrier.
Such enforcement is important because the CPUs and other devices in a system
-can use a variety of tricks to improve performance - including reordering,
+can use a variety of tricks to improve performance, including reordering,
deferral and combination of memory operations; speculative loads; speculative
branch prediction and various types of caching. Memory barriers are used to
override or suppress these tricks, allowing the code to sanely control the
(Q == &A) implies (D == 1)
(Q == &B) implies (D == 4)
-But! CPU 2's perception of P may be updated _before_ its perception of B, thus
+But! CPU 2's perception of P may be updated _before_ its perception of B, thus
leading to the following situation:
(Q == &B) and (D == 2) ????
the "weaker" type.
[!] Note that the stores before the write barrier would normally be expected to
-match the loads after the read barrier or data dependency barrier, and vice
+match the loads after the read barrier or the data dependency barrier, and vice
versa:
CPU 1 CPU 2
EXAMPLES OF MEMORY BARRIER SEQUENCES
------------------------------------
-Firstly, write barriers act as a partial orderings on store operations.
+Firstly, write barriers act as partial orderings on store operations.
Consider the following sequence of events:
CPU 1
+-------+ : :
| | +------+
| |------>| C=3 | } /\
- | | : +------+ }----- \ -----> Events perceptible
- | | : | A=1 | } \/ to rest of system
+ | | : +------+ }----- \ -----> Events perceptible to
+ | | : | A=1 | } \/ the rest of the system
| | : +------+ }
| CPU 1 | : | B=2 | }
| | +------+ }
| | wwwwwwwwwwwwwwww } <--- At this point the write barrier
| | +------+ } requires all stores prior to the
| | : | E=5 | } barrier to be committed before
- | | : +------+ } further stores may be take place.
+ | | : +------+ } further stores may take place
| |------>| D=4 | }
| | +------+
+-------+ : :
V
-Secondly, data dependency barriers act as a partial orderings on data-dependent
+Secondly, data dependency barriers act as partial orderings on data-dependent
loads. Consider the following sequence of events:
CPU 1 CPU 2
barrier();
-This a general barrier - lesser varieties of compiler barrier do not exist.
+This is a general barrier - lesser varieties of compiler barrier do not exist.
The compiler barrier has no direct effect on the CPU, which may then reorder
things however it wishes.
All CPU memory barriers unconditionally imply compiler barriers.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
-systems because it is assumed that a CPU will be appear to be self-consistent,
+systems because it is assumed that a CPU will appear to be self-consistent,
and will order overlapping accesses correctly with respect to itself.
[!] Note that SMP memory barriers _must_ be used to control the ordering of
Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is
equivalent to a full barrier, but a LOCK followed by an UNLOCK is not.
-[!] Note: one of the consequence of LOCKs and UNLOCKs being only one-way
- barriers is that the effects instructions outside of a critical section may
- seep into the inside of the critical section.
+[!] Note: one of the consequences of LOCKs and UNLOCKs being only one-way
+ barriers is that the effects of instructions outside of a critical section
+ may seep into the inside of the critical section.
A LOCK followed by an UNLOCK may not be assumed to be full memory barrier
because it is possible for an access preceding the LOCK to happen after the
UNLOCK M UNLOCK Q
*D = d; *H = h;
-Then there is no guarantee as to what order CPU #3 will see the accesses to *A
+Then there is no guarantee as to what order CPU 3 will see the accesses to *A
through *H occur in, other than the constraints imposed by the separate locks
on the separate CPUs. It might, for example, see:
UNLOCK M [2]
*H = h;
-CPU #3 might see:
+CPU 3 might see:
*E, LOCK M [1], *C, *B, *A, UNLOCK M [1],
LOCK M [2], *H, *F, *G, UNLOCK M [2], *D
-But assuming CPU #1 gets the lock first, it won't see any of:
+But assuming CPU 1 gets the lock first, CPU 3 won't see any of:
*B, *C, *D, *F, *G or *H preceding LOCK M [1]
*A, *B or *C following UNLOCK M [1]
mmiowb();
spin_unlock(Q);
-this will ensure that the two stores issued on CPU #1 appear at the PCI bridge
-before either of the stores issued on CPU #2.
+this will ensure that the two stores issued on CPU 1 appear at the PCI bridge
+before either of the stores issued on CPU 2.
-Furthermore, following a store by a load to the same device obviates the need
-for an mmiowb(), because the load forces the store to complete before the load
+Furthermore, following a store by a load from the same device obviates the need
+for the mmiowb(), because the load forces the store to complete before the load
is performed:
CPU 1 CPU 2
(*) Atomic operations.
- (*) Accessing devices (I/O).
+ (*) Accessing devices.
(*) Interrupts.
(1) read the next pointer from this waiter's record to know as to where the
next waiter record is;
- (4) read the pointer to the waiter's task structure;
+ (2) read the pointer to the waiter's task structure;
(3) clear the task pointer to tell the waiter it has been given the semaphore;
(5) release the reference held on the waiter's task struct.
-In otherwords, it has to perform this sequence of events:
+In other words, it has to perform this sequence of events:
LOAD waiter->list.next;
LOAD waiter->task;
such the implicit memory barrier effects are necessary.
-The following operation are potential problems as they do _not_ imply memory
+The following operations are potential problems as they do _not_ imply memory
barriers, but might be used for implementing such things as UNLOCK-class
operations:
The following also do _not_ imply memory barriers, and so may require explicit
memory barriers under some circumstances (smp_mb__before_atomic_dec() for
-instance)):
+instance):
atomic_add();
atomic_sub();
indeed have special I/O space access cycles and instructions, but many
CPUs don't have such a concept.
- The PCI bus, amongst others, defines an I/O space concept - which on such
- CPUs as i386 and x86_64 cpus readily maps to the CPU's concept of I/O
+ The PCI bus, amongst others, defines an I/O space concept which - on such
+ CPUs as i386 and x86_64 - readily maps to the CPU's concept of I/O
space. However, it may also be mapped as a virtual I/O space in the CPU's
memory map, particularly on those CPUs that don't support alternate I/O
spaces.
i386 architecture machines, for example, this is controlled by way of the
MTRR registers.
- Ordinarily, these will be guaranteed to be fully ordered and uncombined,,
+ Ordinarily, these will be guaranteed to be fully ordered and uncombined,
provided they're not accessing a prefetchable device.
However, intermediary hardware (such as a PCI bridge) may indulge in
(*) ioreadX(), iowriteX()
- These will perform as appropriate for the type of access they're actually
+ These will perform appropriately for the type of access they're actually
doing, be it inX()/outX() or readX()/writeX().
This means that it must be considered that the CPU will execute its instruction
stream in any order it feels like - or even in parallel - provided that if an
-instruction in the stream depends on the an earlier instruction, then that
+instruction in the stream depends on an earlier instruction, then that
earlier instruction must be sufficiently complete[*] before the later
instruction may proceed; in other words: provided that the appearance of
causality is maintained.
become apparent in the same order on those other CPUs.
-Consider dealing with a system that has pair of CPUs (1 & 2), each of which has
-a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D):
+Consider dealing with a system that has a pair of CPUs (1 & 2), each of which
+has a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D):
:
: +--------+
(*) the coherency queue is not flushed by normal loads to lines already
present in the cache, even though the contents of the queue may
- potentially effect those loads.
+ potentially affect those loads.
Imagine, then, that two writes are made on the first CPU, with a write barrier
between them to guarantee that they will appear to reach that CPU's caches in
=============== =============== =======================================
u == 0, v == 1 and p == &u, q == &u
v = 2;
- smp_wmb(); Make sure change to v visible before
+ smp_wmb(); Make sure change to v is visible before
change to p
<A:modify v=2> v is now in cache A exclusively
p = &v;
The write memory barrier forces the other CPUs in the system to perceive that
the local CPU's caches have apparently been updated in the correct order. But
-now imagine that the second CPU that wants to read those values:
+now imagine that the second CPU wants to read those values:
CPU 1 CPU 2 COMMENT
=============== =============== =======================================
q = p;
x = *q;
-The above pair of reads may then fail to happen in expected order, as the
+The above pair of reads may then fail to happen in the expected order, as the
cacheline holding p may get updated in one of the second CPU's caches whilst
the update to the cacheline holding v is delayed in the other of the second
CPU's caches by some other cache event:
Other CPUs may also have split caches, but must coordinate between the various
cachelets for normal memory accesses. The semantics of the Alpha removes the
-need for coordination in absence of memory barriers.
+need for coordination in the absence of memory barriers.
CACHE COHERENCY VS DMA
In addition, the data DMA'd to RAM by a device may be overwritten by dirty
cache lines being written back to RAM from a CPU's cache after the device has
-installed its own data, or cache lines simply present in a CPUs cache may
-simply obscure the fact that RAM has been updated, until at such time as the
-cacheline is discarded from the CPU's cache and reloaded. To deal with this,
-the appropriate part of the kernel must invalidate the overlapping bits of the
+installed its own data, or cache lines present in the CPU's cache may simply
+obscure the fact that RAM has been updated, until at such time as the cacheline
+is discarded from the CPU's cache and reloaded. To deal with this, the
+appropriate part of the kernel must invalidate the overlapping bits of the
cache on each CPU.
See Documentation/cachetlb.txt for more information on cache management.
-----------------------
Memory mapped I/O usually takes place through memory locations that are part of
-a window in the CPU's memory space that have different properties assigned than
+a window in the CPU's memory space that has different properties assigned than
the usual RAM directed window.
Amongst these properties is usually the fact that such accesses bypass the
=========================
A programmer might take it for granted that the CPU will perform memory
-operations in exactly the order specified, so that if a CPU is, for example,
+operations in exactly the order specified, so that if the CPU is, for example,
given the following piece of code to execute:
a = *A;
d = *D;
*E = e;
-They would then expect that the CPU will complete the memory operation for each
+they would then expect that the CPU will complete the memory operation for each
instruction before moving on to the next one, leading to a definite sequence of
operations as seen by external observers in the system:
(*) loads may be done speculatively, and the result discarded should it prove
to have been unnecessary;
- (*) loads may be done speculatively, leading to the result having being
- fetched at the wrong time in the expected sequence of events;
+ (*) loads may be done speculatively, leading to the result having been fetched
+ at the wrong time in the expected sequence of events;
(*) the order of the memory accesses may be rearranged to promote better use
of the CPU buses and caches;
The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
some versions of the Alpha CPU have a split data cache, permitting them to have
-two semantically related cache lines updating at separate times. This is where
+two semantically-related cache lines updated at separate times. This is where
the data dependency barrier really becomes necessary as this synchronises both
caches with the memory coherence system, thus making it seem like pointer
changes vs new data occur in the right order.
-The Alpha defines the Linux's kernel's memory barrier model.
+The Alpha defines the Linux kernel's memory barrier model.
See the subsection on "Cache Coherency" above.
Overview of Linux kernel SPI support
====================================
-02-Dec-2005
+21-May-2007
What is SPI?
------------
The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial
link used to connect microcontrollers to sensors, memory, and peripherals.
+It's a simple "de facto" standard, not complicated enough to acquire a
+standardization body. SPI uses a master/slave configuration.
The three signal wires hold a clock (SCK, often on the order of 10 MHz),
and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In,
Slave Out" (MISO) signals. (Other names are also used.) There are four
clocking modes through which data is exchanged; mode-0 and mode-3 are most
commonly used. Each clock cycle shifts data out and data in; the clock
-doesn't cycle except when there is data to shift.
+doesn't cycle except when there is a data bit to shift. Not all data bits
+are used though; not every protocol uses those full duplex capabilities.
-SPI masters may use a "chip select" line to activate a given SPI slave
+SPI masters use a fourth "chip select" line to activate a given SPI slave
device, so those three signal wires may be connected to several chips
-in parallel. All SPI slaves support chipselects. Some devices have
+in parallel. All SPI slaves support chipselects; they are usually active
+low signals, labeled nCSx for slave 'x' (e.g. nCS0). Some devices have
other signals, often including an interrupt to the master.
-Unlike serial busses like USB or SMBUS, even low level protocols for
+Unlike serial busses like USB or SMBus, even low level protocols for
SPI slave functions are usually not interoperable between vendors
(except for commodities like SPI memory chips).
- Some devices may use eight bit words. Others may different word
lengths, such as streams of 12-bit or 20-bit digital samples.
+ - Words are usually sent with their most significant bit (MSB) first,
+ but sometimes the least significant bit (LSB) goes first instead.
+
+ - Sometimes SPI is used to daisy-chain devices, like shift registers.
+
In the same way, SPI slaves will only rarely support any kind of automatic
discovery/enumeration protocol. The tree of slave devices accessible from
a given SPI master will normally be set up manually, with configuration
Serial Protocol"), PSP ("Programmable Serial Protocol"), and other
related protocols.
+Some chips eliminate a signal line by combining MOSI and MISO, and
+limiting themselves to half-duplex at the hardware level. In fact
+some SPI chips have this signal mode as a strapping option. These
+can be accessed using the same programming interface as SPI, but of
+course they won't handle full duplex transfers. You may find such
+chips described as using "three wire" signaling: SCK, data, nCSx.
+(That data line is sometimes called MOMI or SISO.)
+
Microcontrollers often support both master and slave sides of the SPI
protocol. This document (and Linux) currently only supports the master
side of SPI interactions.
cards without needing a special purpose MMC/SD/SDIO controller.
+I'm confused. What are these four SPI "clock modes"?
+-----------------------------------------------------
+It's easy to be confused here, and the vendor documentation you'll
+find isn't necessarily helpful. The four modes combine two mode bits:
+
+ - CPOL indicates the initial clock polarity. CPOL=0 means the
+ clock starts low, so the first (leading) edge is rising, and
+ the second (trailing) edge is falling. CPOL=1 means the clock
+ starts high, so the first (leading) edge is falling.
+
+ - CPHA indicates the clock phase used to sample data; CPHA=0 says
+ sample on the leading edge, CPHA=1 means the trailing edge.
+
+ Since the signal needs to stablize before it's sampled, CPHA=0
+ implies that its data is written half a clock before the first
+ clock edge. The chipselect may have made it become available.
+
+Chip specs won't always say "uses SPI mode X" in as many words,
+but their timing diagrams will make the CPOL and CPHA modes clear.
+
+In the SPI mode number, CPOL is the high order bit and CPHA is the
+low order bit. So when a chip's timing diagram shows the clock
+starting low (CPOL=0) and data stabilized for sampling during the
+trailing clock edge (CPHA=1), that's SPI mode 1.
+
+
How do these driver programming interfaces work?
------------------------------------------------
The <linux/spi/spi.h> header file includes kerneldoc, as does the
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
+ALCHEMY AU1XX0 MMC DRIVER
+S: Orphan
+
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
M: spyro@f2s.com
S: Maintained
+ARM PRIMECELL MMCI PL180/1 DRIVER
+P: Russell King
+M: rmk@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/ADI ROADRUNNER MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
W: http://linux-atm.sourceforge.net
S: Maintained
+ATMEL AT91 MCI DRIVER
+S: Orphan
+
ATMEL MACB ETHERNET DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
W: http://popies.net/meye/
S: Maintained
+MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
+P: Pavel Pisa
+M: ppisa@pikron.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://mmc.drzeus.cx/wiki/Controllers/Freescale/SDHC
+S: Maintained
+
MOUSE AND MISC DEVICES [GENERAL]
P: Alessandro Rubini
M: rubini@ipvvis.unipv.it
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+PXA MMCI DRIVER
+S: Orphan
+
QLOGIC QLA2XXX FC-SCSI DRIVER
P: Andrew Vasquez
M: linux-driver@qlogic.com
M: oakad@yahoo.com
S: Maintained
+TI OMAP MMC INTERFACE DRIVER
+P: Carlos Aguiar, Anderson Briglia and Syed Khasim
+M: linux-omap-open-source@linux.omap.com
+W: http://linux.omap.com
+W: http://www.muru.com/linux/omap/
+S: Maintained
+
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
Don't change this unless you know what you are doing.
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on, and to
static int dmi_bigsmp; /* can be set by dmi scanners */
-static __init int hp_ht_bigsmp(struct dmi_system_id *d)
+static int hp_ht_bigsmp(struct dmi_system_id *d)
{
#ifdef CONFIG_X86_GENERICARCH
printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
}
-static struct dmi_system_id __initdata bigsmp_dmi_table[] = {
+static struct dmi_system_id bigsmp_dmi_table[] = {
{ hp_ht_bigsmp, "HP ProLiant DL760 G2", {
DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
};
-static int __init probe_bigsmp(void)
+static int probe_bigsmp(void)
{
if (def_to_bigsmp)
dmi_bigsmp = 1;
int exit_with = WEXITSTATUS(status);
if (exit_with == 2)
non_fatal("check_ptrace : child exited with status 2. "
- "Serious trouble happening! Try updating "
- "your host skas patch!\nDisabling SYSEMU "
- "support.");
+ "\nDisabling SYSEMU support.\n");
non_fatal("check_ptrace : child exited with exitcode %d, while "
"expecting %d; status 0x%x\n", exit_with,
exitcode, status);
static void __init check_sysemu(void)
{
void *stack;
+ unsigned long regs[MAX_REG_NR];
int pid, n, status, count=0;
non_fatal("Checking syscall emulation patch for ptrace...");
fatal("check_sysemu : expected SIGTRAP, got status = %d",
status);
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
- os_getpid());
- if(n < 0)
- fatal_perror("check_sysemu : failed to modify system call "
- "return");
+ if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
+ fatal_perror("check_sysemu : PTRACE_GETREGS failed");
+ if(PT_SYSCALL_NR(regs) != __NR_getpid){
+ non_fatal("check_sysemu got system call number %d, "
+ "expected %d...", PT_SYSCALL_NR(regs), __NR_getpid);
+ goto fail;
+ }
+
+ n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
+ if(n < 0){
+ non_fatal("check_sysemu : failed to modify system call "
+ "return");
+ goto fail;
+ }
if (stop_ptraced_child(pid, stack, 0, 0) < 0)
goto fail_stopped;
memory in the static kernel configuration.
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
- Say N if you want to disable CPU hotplug.
+ This is also required for suspend/hibernation on SMP systems.
+
+ Say N if you want to disable CPU hotplug and don't need to
+ suspend.
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
{
int i;
struct pci_dev *dev;
+
if (num_k8_northbridges)
return 0;
- num_k8_northbridges = 0;
dev = NULL;
while ((dev = next_k8_northbridge(dev)) != NULL)
num_k8_northbridges++;
if (!k8_northbridges)
return -ENOMEM;
+ if (!num_k8_northbridges) {
+ k8_northbridges[0] = NULL;
+ return 0;
+ }
+
flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL);
if (!flush_words) {
kfree(k8_northbridges);
{
return sprintf(page, "%llu\n", (unsigned long long)get_capacity(disk));
}
-
+static ssize_t disk_capability_read(struct gendisk *disk, char *page)
+{
+ return sprintf(page, "%x\n", disk->flags);
+}
static ssize_t disk_stats_read(struct gendisk * disk, char *page)
{
preempt_disable();
.attr = {.name = "size", .mode = S_IRUGO },
.show = disk_size_read
};
+static struct disk_attribute disk_attr_capability = {
+ .attr = {.name = "capability", .mode = S_IRUGO },
+ .show = disk_capability_read
+};
static struct disk_attribute disk_attr_stat = {
.attr = {.name = "stat", .mode = S_IRUGO },
.show = disk_stats_read
&disk_attr_removable.attr,
&disk_attr_size.attr,
&disk_attr_stat.attr,
+ &disk_attr_capability.attr,
#ifdef CONFIG_FAIL_MAKE_REQUEST
&disk_attr_fail.attr,
#endif
.show = diskstats_show
};
+static void media_change_notify_thread(struct work_struct *work)
+{
+ struct gendisk *gd = container_of(work, struct gendisk, async_notify);
+ char event[] = "MEDIA_CHANGE=1";
+ char *envp[] = { event, NULL };
+
+ /*
+ * set enviroment vars to indicate which event this is for
+ * so that user space will know to go check the media status.
+ */
+ kobject_uevent_env(&gd->kobj, KOBJ_CHANGE, envp);
+ put_device(gd->driverfs_dev);
+}
+
+void genhd_media_change_notify(struct gendisk *disk)
+{
+ get_device(disk->driverfs_dev);
+ schedule_work(&disk->async_notify);
+}
+EXPORT_SYMBOL_GPL(genhd_media_change_notify);
+
struct gendisk *alloc_disk(int minors)
{
return alloc_disk_node(minors, -1);
kobj_set_kset_s(disk,block_subsys);
kobject_init(&disk->kobj);
rand_initialize_disk(disk);
+ INIT_WORK(&disk->async_notify,
+ media_change_notify_thread);
}
return disk;
}
if (drive == current_reqD)
drive = current_drive;
del_timer(&fd_timeout);
- if (drive < 0 || drive > N_DRIVE) {
+ if (drive < 0 || drive >= N_DRIVE) {
fd_timeout.expires = jiffies + 20UL * HZ;
drive = 0;
} else
if (data & info->ignore_status_mask) {
info->icount.rx++;
+ spin_unlock(&cinfo->card_lock);
return;
}
if (tty_buffer_request_room(tty, 1)) {
/* Sysfs Files */
+static ssize_t applesmc_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "applesmc\n");
+}
+
static ssize_t applesmc_position_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
.brightness_set = applesmc_brightness_set,
};
+static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL);
+
static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL);
static DEVICE_ATTR(calibrate, 0644,
applesmc_calibrate_show, applesmc_calibrate_store);
goto out_driver;
}
+ ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_name.attr);
+
/* Create key enumeration sysfs files */
ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group);
if (ret)
{ "HITACHI CDR-8335" , "ALL" },
{ "HITACHI CDR-8435" , "ALL" },
{ "Toshiba CD-ROM XM-6202B" , "ALL" },
+ { "TOSHIBA CD-ROM XM-1702BC", "ALL" },
{ "CD-532E-A" , "ALL" },
{ "E-IDE CD-ROM CR-840", "ALL" },
{ "CD-ROM Drive/F5A", "ALL" },
{ "WPI CDD-820", "ALL" },
{ "SAMSUNG CD-ROM SC-148C", "ALL" },
{ "SAMSUNG CD-ROM SC", "ALL" },
- { "SanDisk SDP3B-64" , "ALL" },
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" },
{ "_NEC DV5800A", "ALL" },
+ { "SAMSUNG CD-ROM SN-124", "N001" },
+ { "Seagate STT20000A", "ALL" },
{ NULL , NULL }
};
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
+ case ide_etrax100: name = "etrax100"; break;
+ case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
pci_read_config_word(dev, 0x4A, &csb5_pio);
pci_read_config_byte(dev, 0x54, &ultra_enable);
+ /* If we are in RAID mode (eg AMI MegaIDE) then we can't it
+ turns out trust the firmware configuration */
+
+ if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ goto oem_setup_failed;
+
/* Per Specified Design by OEM, and ASIC Architect */
if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) {
u8 dmaspeed = dma_timing;
- dma_timing &= ~0xFF;
+ dma_timing &= ~0xFFU;
if ((dmaspeed & 0x20) == 0x20)
dmaspeed = XFER_MW_DMA_2;
else if ((dmaspeed & 0x21) == 0x21)
} else if (pio_timing) {
u8 piospeed = pio_timing;
- pio_timing &= ~0xFF;
+ pio_timing &= ~0xFFU;
if ((piospeed & 0x20) == 0x20)
piospeed = XFER_PIO_4;
else if ((piospeed & 0x22) == 0x22)
oem_setup_failed:
- pio_timing &= ~0xFF;
- dma_timing &= ~0xFF;
+ pio_timing &= ~0xFFU;
+ dma_timing &= ~0xFFU;
ultra_timing &= ~(0x0F << (4*unit));
ultra_enable &= ~(0x01 << drive->dn);
csb5_pio &= ~(0x0F << (4*drive->dn));
{
appl->xbuffer_used[ref] = true;
DBG_PRV1(("%d:xbuf_used(%d)", appl->Id, ref + 1))
- return (void *) ref;
+ return (void *)(long)ref;
}
void *TransmitBufferGet(APPL * appl, void *p)
{
- if (appl->xbuffer_internal[(dword) p])
- return appl->xbuffer_internal[(dword) p];
+ if (appl->xbuffer_internal[(dword)(long)p])
+ return appl->xbuffer_internal[(dword)(long)p];
- return appl->xbuffer_ptr[(dword) p];
+ return appl->xbuffer_ptr[(dword)(long)p];
}
void TransmitBufferFree(APPL * appl, void *p)
{
- appl->xbuffer_used[(dword) p] = false;
- DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword) p) + 1))
+ appl->xbuffer_used[(dword)(long)p] = false;
+ DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword)(long)p) + 1))
}
void *ReceiveBufferGet(APPL * appl, int Num)
/* if DATA_B3_IND, copy data too */
if (command == _DATA_B3_I) {
dword data = GET_DWORD(&msg.info.data_b3_ind.Data);
- memcpy(write + length, (void *) data, dlength);
+ memcpy(write + length, (void *)(long)data, dlength);
}
#ifndef DIVA_NO_DEBUGLIB
if (myDriverDebugHandle.dbgMask & DL_BLK) {
xlog("\x00\x02", &msg, 0x81, length);
for (i = 0; i < dlength; i += 256) {
- DBG_BLK((((char *) GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
+ DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
((dlength - i) < 256) ? (dlength - i) : 256))
if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
break; /* not more if not explicitely requested */
-
/*
*
Copyright (c) Eicon Networks, 2002.
if (m->header.command == _DATA_B3_R)
{
- m->info.data_b3_req.Data = (dword)(TransmitBufferSet (appl, m->info.data_b3_req.Data));
+ m->info.data_b3_req.Data = (dword)(long)(TransmitBufferSet (appl, m->info.data_b3_req.Data));
}
{
TransmitBufferFree (plci->appl,
- (byte *)(((CAPI_MSG *)(&((byte *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data));
+ (byte *)(long)(((CAPI_MSG *)(&((byte *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data));
}
&& (((byte *)(parms[0].info)) < ((byte *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue)))
{
- data->P = (byte *)(*((dword *)(parms[0].info)));
+ data->P = (byte *)(long)(*((dword *)(parms[0].info)));
}
else
&& (((byte *)(parms[0].info)) < ((byte *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue)))
{
- TransmitBufferFree (appl, (byte *)(*((dword *)(parms[0].info))));
+ TransmitBufferFree (appl, (byte *)(long)(*((dword *)(parms[0].info))));
}
}
{
if (m->header.command == _DATA_B3_R)
- TransmitBufferFree (appl, (byte *)(m->info.data_b3_req.Data));
+ TransmitBufferFree (appl, (byte *)(long)(m->info.data_b3_req.Data));
dbug(1,dprintf("Error 0x%04x from msg(0x%04x)", i, m->header.command));
break;
case N_UDATA:
if (!(udata_forwarding_table[plci->NL.RBuffer->P[0] >> 5] & (1L << (plci->NL.RBuffer->P[0] & 0x1f))))
{
- plci->RData[0].P = plci->internal_ind_buffer + (-((int)(plci->internal_ind_buffer)) & 3);
+ plci->RData[0].P = plci->internal_ind_buffer + (-((int)(long)(plci->internal_ind_buffer)) & 3);
plci->RData[0].PLength = INTERNAL_IND_BUFFER_SIZE;
plci->NL.R = plci->RData;
plci->NL.RNum = 1;
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
- return retval;
+ return -EINVAL;
}
cs = cards[i].cs;
hisax_d_if->cs = cs;
{
int k;
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->complete = complete;
"HFC-S USB: Stopping iso chain for fifo %i.%i",
fifo->fifonum, i);
#endif
- usb_unlink_urb(fifo->iso[i].purb);
+ usb_kill_urb(fifo->iso[i].purb);
usb_free_urb(fifo->iso[i].purb);
fifo->iso[i].purb = NULL;
}
}
- if (fifo->urb) {
- usb_unlink_urb(fifo->urb);
- usb_free_urb(fifo->urb);
- fifo->urb = NULL;
- }
+ usb_kill_urb(fifo->urb);
+ usb_free_urb(fifo->urb);
+ fifo->urb = NULL;
fifo->active = 0;
}
}
/* default Prot: EURO ISDN, should be a module_param */
hfc->protocol = 2;
- hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
+ i = hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
+ if (i) {
+ printk(KERN_INFO "HFC-S USB: hisax_register -> %d\n", i);
+ return i;
+ }
#ifdef CONFIG_HISAX_DEBUG
hfc_debug = debug;
#endif
/* init the chip and register the driver */
if (usb_init(context)) {
- if (context->ctrl_urb) {
- usb_unlink_urb(context->ctrl_urb);
- usb_free_urb(context->ctrl_urb);
- context->ctrl_urb = NULL;
- }
+ usb_kill_urb(context->ctrl_urb);
+ usb_free_urb(context->ctrl_urb);
+ context->ctrl_urb = NULL;
kfree(context);
return (-EIO);
}
i);
#endif
}
- if (context->fifos[i].urb) {
- usb_unlink_urb(context->fifos[i].urb);
- usb_free_urb(context->fifos[i].urb);
- context->fifos[i].urb = NULL;
- }
+ usb_kill_urb(context->fifos[i].urb);
+ usb_free_urb(context->fifos[i].urb);
+ context->fifos[i].urb = NULL;
}
context->fifos[i].active = 0;
}
- /* wait for all URBS to terminate */
- mdelay(10);
- if (context->ctrl_urb) {
- usb_unlink_urb(context->ctrl_urb);
- usb_free_urb(context->ctrl_urb);
- context->ctrl_urb = NULL;
- }
+ usb_kill_urb(context->ctrl_urb);
+ usb_free_urb(context->ctrl_urb);
+ context->ctrl_urb = NULL;
hisax_unregister(&context->d_if);
kfree(context); /* free our structure again */
} /* hfc_usb_disconnect */
for (i = 0; i < 2; i++)
b_if[i] = &adapter->bcs[i].b_if;
- hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp", protocol);
+ if (hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp",
+ protocol) != 0) {
+ kfree(adapter);
+ adapter = NULL;
+ }
return adapter;
}
for (i = 0; i < 2; i++)
b_if[i] = &adapter->bcs[i].b_if;
- hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb", protocol);
+ if (hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb",
+ protocol) != 0)
+ goto err_b1;
+
st5481_start(adapter);
usb_set_intfdata(intf, adapter);
return 0;
+ err_b1:
+ st5481_release_b(&adapter->bcs[1]);
err_b:
st5481_release_b(&adapter->bcs[0]);
err_d:
{
int k;
- spin_lock_init(&urb->lock);
urb->dev=dev;
urb->pipe=pipe;
urb->interval = 1;
}
-static int write_sb_page(mddev_t *mddev, long offset, struct page *page, int wait)
+static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
{
mdk_rdev_t *rdev;
struct list_head *tmp;
+ mddev_t *mddev = bitmap->mddev;
ITERATE_RDEV(mddev, rdev, tmp)
if (test_bit(In_sync, &rdev->flags)
- && !test_bit(Faulty, &rdev->flags))
+ && !test_bit(Faulty, &rdev->flags)) {
+ int size = PAGE_SIZE;
+ if (page->index == bitmap->file_pages-1)
+ size = roundup(bitmap->last_page_size,
+ bdev_hardsect_size(rdev->bdev));
md_super_write(mddev, rdev,
- (rdev->sb_offset<<1) + offset
+ (rdev->sb_offset<<1) + bitmap->offset
+ page->index * (PAGE_SIZE/512),
- PAGE_SIZE,
+ size,
page);
+ }
if (wait)
md_super_wait(mddev);
struct buffer_head *bh;
if (bitmap->file == NULL)
- return write_sb_page(bitmap->mddev, bitmap->offset, page, wait);
+ return write_sb_page(bitmap, page, wait);
bh = page_buffers(page);
}
bitmap->filemap[bitmap->file_pages++] = page;
+ bitmap->last_page_size = count;
}
paddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
if (!conf)
return NULL;
- mddev->private = conf;
-
cnt = 0;
conf->array_size = 0;
* First calculate the device offsets.
*/
conf->disks[0].offset = 0;
- for (i=1; i<mddev->raid_disks; i++)
+ for (i = 1; i < raid_disks; i++)
conf->disks[i].offset =
conf->disks[i-1].offset +
conf->disks[i-1].size;
curr_offset < conf->array_size;
curr_offset += conf->hash_spacing) {
- while (i < mddev->raid_disks-1 &&
+ while (i < raid_disks-1 &&
curr_offset >= conf->disks[i+1].offset)
i++;
*/
linear_conf_t *newconf;
- if (rdev->raid_disk != mddev->raid_disks)
+ if (rdev->saved_raid_disk != mddev->raid_disks)
return -EINVAL;
+ rdev->raid_disk = rdev->saved_raid_disk;
+
newconf = linear_conf(mddev,mddev->raid_disks+1);
if (!newconf)
ITERATE_RDEV(mddev,rdev2,tmp)
if (rdev2->desc_nr+1 > max_dev)
max_dev = rdev2->desc_nr+1;
-
- sb->max_dev = cpu_to_le32(max_dev);
+
+ if (max_dev > le32_to_cpu(sb->max_dev))
+ sb->max_dev = cpu_to_le32(max_dev);
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
}
/* make sure rdev->size exceeds mddev->size */
if (rdev->size && (mddev->size == 0 || rdev->size < mddev->size)) {
- if (mddev->pers)
- /* Cannot change size, so fail */
- return -ENOSPC;
- else
+ if (mddev->pers) {
+ /* Cannot change size, so fail
+ * If mddev->level <= 0, then we don't care
+ * about aligning sizes (e.g. linear)
+ */
+ if (mddev->level > 0)
+ return -ENOSPC;
+ } else
mddev->size = rdev->size;
}
rdev->desc_nr = i++;
rdev->raid_disk = rdev->desc_nr;
set_bit(In_sync, &rdev->flags);
+ } else if (rdev->raid_disk >= mddev->raid_disks) {
+ rdev->raid_disk = -1;
+ clear_bit(In_sync, &rdev->flags);
}
}
raid0_conf_t *conf = mddev_to_conf(mddev);
struct strip_zone *zone;
mdk_rdev_t *tmp_dev;
- unsigned long chunk;
+ sector_t chunk;
sector_t block, rsect;
const int rw = bio_data_dir(bio);
sector_div(x, zone->nb_dev);
chunk = x;
- BUG_ON(x != (sector_t)chunk);
x = block >> chunksize_bits;
tmp_dev = zone->dev[sector_div(x, zone->nb_dev)];
}
rc = driver_register(&drv->driver);
- if (rc)
- destroy_workqueue(drv->event_queue);
+ if (rc) {
+ if (drv->event) {
+ destroy_workqueue(drv->event_queue);
+ drv->event_queue = NULL;
+ }
+ }
return rc;
};
int i;
struct i2o_driver *drv;
- for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+ for (i = 0; i < i2o_max_drivers; i++) {
drv = i2o_drivers[i];
if (drv)
int i;
struct i2o_driver *drv;
- for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+ for (i = 0; i < i2o_max_drivers; i++) {
drv = i2o_drivers[i];
if (drv)
int i;
struct i2o_driver *drv;
- for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+ for (i = 0; i < i2o_max_drivers; i++) {
drv = i2o_drivers[i];
if (drv)
int i;
struct i2o_driver *drv;
- for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+ for (i = 0; i < i2o_max_drivers; i++) {
drv = i2o_drivers[i];
if (drv)
spin_lock_init(&i2o_drivers_lock);
- if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64) ||
- ((i2o_max_drivers ^ (i2o_max_drivers - 1)) !=
- (2 * i2o_max_drivers - 1))) {
- osm_warn("max_drivers set to %d, but must be >=2 and <= 64 and "
- "a power of 2\n", i2o_max_drivers);
+ if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64)) {
+ osm_warn("max_drivers set to %d, but must be >=2 and <= 64\n",
+ i2o_max_drivers);
i2o_max_drivers = I2O_MAX_DRIVERS;
}
osm_info("max drivers = %d\n", i2o_max_drivers);
i2o_drivers =
- kzalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL);
+ kcalloc(i2o_max_drivers, sizeof(*i2o_drivers), GFP_KERNEL);
if (!i2o_drivers)
return -ENOMEM;
struct cdev cdev;
struct mutex open_lock;
+ spinlock_t ioctl_lock;
};
static unsigned char phantom_devices[PHANTOM_MAX_MINORS];
atomic_set(&dev->counter, 0);
iowrite32(PHN_CTL_IRQ, dev->iaddr + PHN_CONTROL);
iowrite32(0x43, dev->caddr + PHN_IRQCTL);
- } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING))
+ ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
+ } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING)) {
iowrite32(0, dev->caddr + PHN_IRQCTL);
+ ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
+ }
dev->status = newstat;
* File ops
*/
-static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg)
+static long phantom_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct phantom_device *dev = file->private_data;
struct phm_regs rs;
if (r.reg > 7)
return -EINVAL;
+ spin_lock(&dev->ioctl_lock);
if (r.reg == PHN_CONTROL && (r.value & PHN_CTL_IRQ) &&
- phantom_status(dev, dev->status | PHB_RUNNING))
+ phantom_status(dev, dev->status | PHB_RUNNING)){
+ spin_unlock(&dev->ioctl_lock);
return -ENODEV;
+ }
pr_debug("phantom: writing %x to %u\n", r.value, r.reg);
iowrite32(r.value, dev->iaddr + r.reg);
+ ioread32(dev->iaddr); /* PCI posting */
if (r.reg == PHN_CONTROL && !(r.value & PHN_CTL_IRQ))
phantom_status(dev, dev->status & ~PHB_RUNNING);
+ spin_unlock(&dev->ioctl_lock);
break;
case PHN_SET_REGS:
if (copy_from_user(&rs, argp, sizeof(rs)))
return -EFAULT;
pr_debug("phantom: SRS %u regs %x\n", rs.count, rs.mask);
+ spin_lock(&dev->ioctl_lock);
for (i = 0; i < min(rs.count, 8U); i++)
if ((1 << i) & rs.mask)
iowrite32(rs.values[i], dev->oaddr + i);
+ ioread32(dev->iaddr); /* PCI posting */
+ spin_unlock(&dev->ioctl_lock);
break;
case PHN_GET_REG:
if (copy_from_user(&r, argp, sizeof(r)))
return -EFAULT;
pr_debug("phantom: GRS %u regs %x\n", rs.count, rs.mask);
+ spin_lock(&dev->ioctl_lock);
for (i = 0; i < min(rs.count, 8U); i++)
if ((1 << i) & rs.mask)
rs.values[i] = ioread32(dev->iaddr + i);
+ spin_unlock(&dev->ioctl_lock);
if (copy_to_user(argp, &rs, sizeof(rs)))
return -EFAULT;
static struct file_operations phantom_file_ops = {
.open = phantom_open,
.release = phantom_release,
- .ioctl = phantom_ioctl,
+ .unlocked_ioctl = phantom_ioctl,
.poll = phantom_poll,
};
iowrite32(0, dev->iaddr);
iowrite32(0xc0, dev->iaddr);
+ ioread32(dev->iaddr); /* PCI posting */
atomic_inc(&dev->counter);
wake_up_interruptible(&dev->wait);
}
mutex_init(&pht->open_lock);
+ spin_lock_init(&pht->ioctl_lock);
init_waitqueue_head(&pht->wait);
cdev_init(&pht->cdev, &phantom_file_ops);
pht->cdev.owner = THIS_MODULE;
iowrite32(0, pht->caddr + PHN_IRQCTL);
+ ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */
retval = request_irq(pdev->irq, phantom_isr,
IRQF_SHARED | IRQF_DISABLED, "phantom", pht);
if (retval) {
cdev_del(&pht->cdev);
iowrite32(0, pht->caddr + PHN_IRQCTL);
+ ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */
free_irq(pdev->irq, pht);
pci_iounmap(pdev, pht->oaddr);
struct phantom_device *dev = pci_get_drvdata(pdev);
iowrite32(0, dev->caddr + PHN_IRQCTL);
+ ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
return 0;
}
struct mmc_data data;
};
-static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req)
-{
- struct mmc_blk_data *md = mq->data;
- int stat = BLKPREP_OK;
-
- /*
- * If we have no device, we haven't finished initialising.
- */
- if (!md || !mq->card) {
- printk(KERN_ERR "%s: killing request - no device/host\n",
- req->rq_disk->disk_name);
- stat = BLKPREP_KILL;
- }
-
- return stat;
-}
-
static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
{
int err;
if (ret)
goto err_putdisk;
- md->queue.prep_fn = mmc_blk_prep_rq;
md->queue.issue_fn = mmc_blk_issue_rq;
md->queue.data = md;
#define MMC_QUEUE_SUSPENDED (1 << 0)
/*
- * Prepare a MMC request. Essentially, this means passing the
- * preparation off to the media driver. The media driver will
- * create a mmc_io_request in req->special.
+ * Prepare a MMC request. This just filters out odd stuff.
*/
static int mmc_prep_request(struct request_queue *q, struct request *req)
{
- struct mmc_queue *mq = q->queuedata;
- int ret = BLKPREP_KILL;
-
- if (blk_special_request(req)) {
- /*
- * Special commands already have the command
- * blocks already setup in req->special.
- */
- BUG_ON(!req->special);
-
- ret = BLKPREP_OK;
- } else if (blk_fs_request(req) || blk_pc_request(req)) {
- /*
- * Block I/O requests need translating according
- * to the protocol.
- */
- ret = mq->prep_fn(mq, req);
- } else {
- /*
- * Everything else is invalid.
- */
+ /*
+ * We only like normal block requests.
+ */
+ if (!blk_fs_request(req) && !blk_pc_request(req)) {
blk_dump_rq_flags(req, "MMC bad request");
+ return BLKPREP_KILL;
}
- if (ret == BLKPREP_OK)
- req->cmd_flags |= REQ_DONTPREP;
+ req->cmd_flags |= REQ_DONTPREP;
- return ret;
+ return BLKPREP_OK;
}
static int mmc_queue_thread(void *d)
struct semaphore thread_sem;
unsigned int flags;
struct request *req;
- int (*prep_fn)(struct mmc_queue *, struct request *);
int (*issue_fn)(struct mmc_queue *, struct request *);
void *data;
struct request_queue *queue;
struct scatterlist *sg;
};
-struct mmc_io_request {
- struct request *rq;
- int num;
- struct mmc_command selcmd; /* mmc_queue private */
- struct mmc_command cmd[4]; /* max 4 commands */
-};
-
extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
extern void mmc_cleanup_queue(struct mmc_queue *);
extern void mmc_queue_suspend(struct mmc_queue *);
int ret = 0;
#if defined(CONFIG_PPC_MERGE)
- cdm = mpc52xx_find_and_map("mpc52xx-cdm");
- gpio = mpc52xx_find_and_map("mpc52xx-gpio");
+ cdm = mpc52xx_find_and_map("mpc5200-cdm");
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
#else
cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
struct spi_master *master;
int ret;
- if (pdata == NULL)
- return -ENODEV;
-
master = spi_alloc_master(dev, sizeof *mps);
if (master == NULL)
return -ENOMEM;
}
regaddr64 = of_translate_address(op->node, regaddr_p);
+ /* get PSC id (1..6, used by port_config) */
if (op->dev.platform_data == NULL) {
- struct device_node *np;
- int i = 0;
+ const u32 *psc_nump;
- for_each_node_by_type(np, "spi") {
- if (of_find_device_by_node(np) == op) {
- id = i;
- break;
- }
- i++;
+ psc_nump = of_get_property(op->node, "cell-index", NULL);
+ if (!psc_nump || *psc_nump > 5) {
+ printk(KERN_ERR "mpc52xx_psc_spi: Device node %s has invalid "
+ "cell-index property\n", op->node->full_name);
+ return -EINVAL;
}
+ id = *psc_nump + 1;
}
return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
}
static struct of_device_id mpc52xx_psc_spi_of_match[] = {
- { .type = "spi", .compatible = "mpc52xx-psc-spi", },
+ { .type = "spi", .compatible = "mpc5200-psc-spi", },
{},
};
switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
case SPI_MODE_0:
case SPI_MODE_3:
- flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
+ flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
break;
case SPI_MODE_1:
case SPI_MODE_2:
- flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
+ flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
break;
}
n--, k_tmp++, u_tmp++) {
k_tmp->len = u_tmp->len;
+ total += k_tmp->len;
+ if (total > bufsiz) {
+ status = -EMSGSIZE;
+ goto done;
+ }
+
if (u_tmp->rx_buf) {
k_tmp->rx_buf = buf;
if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len))
u_tmp->len))
goto done;
}
-
- total += k_tmp->len;
- if (total > bufsiz) {
- status = -EMSGSIZE;
- goto done;
- }
buf += k_tmp->len;
k_tmp->cs_change = !!u_tmp->cs_change;
break;
}
if (__copy_from_user(ioc, (void __user *)arg, tmp)) {
+ kfree(ioc);
retval = -EFAULT;
break;
}
out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ /*
+ * Turn on cache snooping hardware, since some PowerPC platforms
+ * wholly rely on hardware to deal with cache coherent
+ */
+
+ /* Setup Snooping for all the 4GB space */
+ /* SNOOP1 starts from 0x0, size 2G */
+ out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
+ /* SNOOP2 starts from 0x80000000, size 2G */
+ out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
+#endif
+
if (pdata->operating_mode == FSL_USB2_DR_HOST)
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
+#define SNOOP_SIZE_2GB 0x1e
#endif /* _EHCI_FSL_H */
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on FB && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on FB && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on FB && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
source "drivers/video/geode/Kconfig"
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on (FB = y) && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on (FB = y) && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
config FB_PS3
bool "PS3 GPU framebuffer driver"
depends on (FB = y) && PS3_PS3AV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
---help---
Include support for the virtual frame buffer in the PS3 platform.
/* initialize GPIOs */
imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(PD10_PF_SPL_SPR);
imx_gpio_mode(PD11_PF_CONTRAST);
imx_gpio_mode(PD14_PF_FLM_VSYNC);
imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD7_PF_REV);
- imx_gpio_mode(PD8_PF_CLS);
-
-#ifndef CONFIG_MACH_PIMX1
- /* on PiMX1 used as buffers enable signal
- */
- imx_gpio_mode(PD9_PF_PS);
-#endif
-
-#ifndef CONFIG_MACH_MX1FS2
- /* on mx1fs2 this pin is used to (de)activate the display, so we need
- * it as a normal gpio
- */
imx_gpio_mode(PD12_PF_ACD_OE);
-#endif
+ /* These are only needed for Sharp HR TFT displays */
+ if (fbi->pcr & PCR_SHARP) {
+ imx_gpio_mode(PD7_PF_REV);
+ imx_gpio_mode(PD8_PF_CLS);
+ imx_gpio_mode(PD9_PF_PS);
+ imx_gpio_mode(PD10_PF_SPL_SPR);
+ }
}
#ifdef CONFIG_PM
info->fbops = &imxfb_ops;
info->flags = FBINFO_FLAG_DEFAULT;
- info->pseudo_palette = (fbi + 1);
fbi->rgb[RGB_16] = &def_rgb_16;
fbi->rgb[RGB_8] = &def_rgb_8;
info->var.sync = inf->sync;
info->var.grayscale = inf->cmap_greyscale;
fbi->cmap_inverse = inf->cmap_inverse;
+ fbi->cmap_static = inf->cmap_static;
fbi->pcr = inf->pcr;
fbi->lscr1 = inf->lscr1;
fbi->dmacr = inf->dmacr;
index = PM2VR_RD_INDEXED_DATA;
break;
}
- mb();
+ wmb();
pm2_WR(p, index, v);
+ wmb();
}
static inline void pm2v_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
{
pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
- mb();
+ wmb();
pm2_WR(p, PM2VR_RD_INDEXED_DATA, v);
+ wmb();
}
#ifdef CONFIG_FB_PM2_FIFO_DISCONNECT
WAIT_FIFO(par, 8);
pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0);
- wmb();
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p);
- wmb();
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1);
rmb();
for (i = 256;
pm2_mnp(clk, &m, &n, &p);
WAIT_FIFO(par, 10);
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m);
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p);
- wmb();
pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS);
rmb();
for (i = 256;
pm2_mnp(clk, &m, &n, &p);
WAIT_FIFO(par, 8);
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m);
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p);
- wmb();
pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS);
rmb();
for (i = 256;
if (!w || !h)
return;
- WAIT_FIFO(par, 6);
+ WAIT_FIFO(par, 5);
pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE |
PM2F_CONFIG_FB_READ_SOURCE_ENABLE);
- pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0);
if (copy)
pm2_WR(par, PM2R_FB_SOURCE_DELTA,
((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff));
*/
static char *mode_option __devinitdata;
-/*
- * If your driver supports multiple boards, you should make the
- * below data types arrays, or allocate them dynamically (using kmalloc()).
- */
-
/*
* This structure defines the hardware state of the graphics card. Normally
* you place this in a header file in linux/include/video. This file usually
unsigned char __iomem *v_regs;/* virtual address of p_regs */
u32 video; /* video flags before blanking */
u32 base; /* screen base (xoffset+yoffset) in 128 bits unit */
- u32 palette[16];
+ u32 palette[16];
};
/*
while (PM3_READ_REG(par, PM3InFIFOSpace) < n);
}
-static inline void PM3_SLOW_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
-{
- if (par->v_regs) {
- mb();
- PM3_WAIT(par, 1);
- wmb();
- PM3_WRITE_REG(par, off, v);
- }
-}
-
-static inline void PM3_SET_INDEX(struct pm3_par *par, unsigned index)
-{
- PM3_SLOW_WRITE_REG(par, PM3RD_IndexHigh, (index >> 8) & 0xff);
- PM3_SLOW_WRITE_REG(par, PM3RD_IndexLow, index & 0xff);
-}
-
static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
{
- PM3_SET_INDEX(par, r);
+ PM3_WAIT(par, 3);
+ PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff);
+ PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff);
wmb();
PM3_WRITE_REG(par, PM3RD_IndexedData, v);
+ wmb();
}
static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
unsigned char r, unsigned char g, unsigned char b)
{
- PM3_SLOW_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
- PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, r);
- PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, g);
- PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, b);
+ PM3_WAIT(par, 4);
+ PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
+ wmb();
+ PM3_WRITE_REG(par, PM3RD_PaletteData, r);
+ wmb();
+ PM3_WRITE_REG(par, PM3RD_PaletteData, g);
+ wmb();
+ PM3_WRITE_REG(par, PM3RD_PaletteData, b);
+ wmb();
}
static void pm3fb_clear_colormap(struct pm3_par *par,
{
int i;
- for (i = 0; i < 256 ; i++) /* fill color map with white */
+ for (i = 0; i < 256 ; i++)
pm3fb_set_color(par, i, r, g, b);
}
}
}
-static inline int pm3fb_shift_bpp(unsigned long depth, int v)
+static inline int pm3fb_depth(const struct fb_var_screeninfo *var)
{
- switch (depth) {
+ if ( var->bits_per_pixel == 16 )
+ return var->red.length + var->green.length
+ + var->blue.length;
+
+ return var->bits_per_pixel;
+}
+
+static inline int pm3fb_shift_bpp(unsigned bpp, int v)
+{
+ switch (bpp) {
case 8:
return (v >> 4);
- case 12:
- case 15:
case 16:
return (v >> 3);
case 32:
return (v >> 2);
}
- DPRINTK("Unsupported depth %ld\n", depth);
+ DPRINTK("Unsupported depth %u\n", bpp);
return 0;
}
const u32 vbend = vsend + info->var.upper_margin;
const u32 vtotal = info->var.yres + vbend;
const u32 width = (info->var.xres_virtual + 7) & ~7;
-
- PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
- PM3_SLOW_WRITE_REG(par, PM3Aperture0, 0x00000000);
- PM3_SLOW_WRITE_REG(par, PM3Aperture1, 0x00000000);
- PM3_SLOW_WRITE_REG(par, PM3FIFODis, 0x00000007);
-
- PM3_SLOW_WRITE_REG(par, PM3HTotal,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- htotal - 1));
- PM3_SLOW_WRITE_REG(par, PM3HsEnd,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- hsend));
- PM3_SLOW_WRITE_REG(par, PM3HsStart,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- hsstart));
- PM3_SLOW_WRITE_REG(par, PM3HbEnd,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- hbend));
- PM3_SLOW_WRITE_REG(par, PM3HgEnd,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- hbend));
- PM3_SLOW_WRITE_REG(par, PM3ScreenStride,
- pm3fb_shift_bpp(info->var.bits_per_pixel,
- width));
- PM3_SLOW_WRITE_REG(par, PM3VTotal, vtotal - 1);
- PM3_SLOW_WRITE_REG(par, PM3VsEnd, vsend - 1);
- PM3_SLOW_WRITE_REG(par, PM3VsStart, vsstart - 1);
- PM3_SLOW_WRITE_REG(par, PM3VbEnd, vbend);
-
- switch (info->var.bits_per_pixel) {
+ const unsigned bpp = info->var.bits_per_pixel;
+
+ PM3_WAIT(par, 20);
+ PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
+ PM3_WRITE_REG(par, PM3Aperture0, 0x00000000);
+ PM3_WRITE_REG(par, PM3Aperture1, 0x00000000);
+ PM3_WRITE_REG(par, PM3FIFODis, 0x00000007);
+
+ PM3_WRITE_REG(par, PM3HTotal,
+ pm3fb_shift_bpp(bpp, htotal - 1));
+ PM3_WRITE_REG(par, PM3HsEnd,
+ pm3fb_shift_bpp(bpp, hsend));
+ PM3_WRITE_REG(par, PM3HsStart,
+ pm3fb_shift_bpp(bpp, hsstart));
+ PM3_WRITE_REG(par, PM3HbEnd,
+ pm3fb_shift_bpp(bpp, hbend));
+ PM3_WRITE_REG(par, PM3HgEnd,
+ pm3fb_shift_bpp(bpp, hbend));
+ PM3_WRITE_REG(par, PM3ScreenStride,
+ pm3fb_shift_bpp(bpp, width));
+ PM3_WRITE_REG(par, PM3VTotal, vtotal - 1);
+ PM3_WRITE_REG(par, PM3VsEnd, vsend - 1);
+ PM3_WRITE_REG(par, PM3VsStart, vsstart - 1);
+ PM3_WRITE_REG(par, PM3VbEnd, vbend);
+
+ switch (bpp) {
case 8:
- PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+ PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
- PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+ PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
break;
- case 12:
- case 15:
case 16:
#ifndef __BIG_ENDIAN
- PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+ PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
- PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+ PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
#else
- PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+ PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
- PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+ PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
#endif /* ! __BIG_ENDIAN */
case 32:
#ifndef __BIG_ENDIAN
- PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+ PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
- PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+ PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
#else
- PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+ PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
- PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+ PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
#endif /* ! __BIG_ENDIAN */
break;
default:
- DPRINTK("Unsupported depth %d\n",
- info->var.bits_per_pixel);
+ DPRINTK("Unsupported depth %d\n", bpp);
break;
}
PM3VideoControl_VSYNC_MASK);
video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
PM3VideoControl_VSYNC_ACTIVE_HIGH;
- PM3_SLOW_WRITE_REG(par, PM3VideoControl, video);
+ PM3_WRITE_REG(par, PM3VideoControl, video);
}
- PM3_SLOW_WRITE_REG(par, PM3VClkCtl,
+ PM3_WRITE_REG(par, PM3VClkCtl,
(PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
- PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
- PM3_SLOW_WRITE_REG(par, PM3ChipConfig,
+ PM3_WRITE_REG(par, PM3ScreenBase, par->base);
+ PM3_WRITE_REG(par, PM3ChipConfig,
(PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
+ wmb();
{
unsigned char uninitialized_var(m); /* ClkPreScale */
unsigned char uninitialized_var(n); /* ClkFeedBackScale */
PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
- switch (info->var.bits_per_pixel) {
+ switch (pm3fb_depth(&info->var)) {
case 8:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_8_BIT_PIXELS);
* hardware independent functions
*/
int pm3fb_init(void);
-int pm3fb_setup(char*);
static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
u32 lpitch;
+ unsigned bpp = var->red.length + var->green.length
+ + var->blue.length + var->transp.length;
- var->transp.offset = 0;
- var->transp.length = 0;
- switch(var->bits_per_pixel) {
- case 8:
- var->red.length = var->green.length = var->blue.length = 8;
- var->red.offset = var->green.offset = var->blue.offset = 0;
- break;
- case 12:
- var->red.offset = 8;
- var->red.length = 4;
- var->green.offset = 4;
- var->green.length = 4;
- var->blue.offset = 0;
- var->blue.length = 4;
- var->transp.offset = 12;
- var->transp.length = 4;
- case 15:
- var->red.offset = 10;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 5;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = 15;
- var->transp.length = 1;
- break;
- case 16:
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- break;
- case 32:
- var->transp.offset = 24;
- var->transp.length = 8;
- var->red.offset = 16;
- var->green.offset = 8;
- var->blue.offset = 0;
- var->red.length = var->green.length = var->blue.length = 8;
- break;
- default:
- DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
- return -EINVAL;
+ if ( bpp != var->bits_per_pixel ) {
+ /* set predefined mode for bits_per_pixel settings */
+
+ switch(var->bits_per_pixel) {
+ case 8:
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->red.offset = var->green.offset = var->blue.offset = 0;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16:
+ var->red.length = var->blue.length = 5;
+ var->green.length = 6;
+ var->transp.length = 0;
+ break;
+ case 32:
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->transp.length = 8;
+ break;
+ default:
+ DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+ return -EINVAL;
+ }
+ }
+ /* it is assumed BGRA order */
+ if (var->bits_per_pixel > 8 )
+ {
+ var->blue.offset = 0;
+ var->green.offset = var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
+ var->transp.offset = var->red.offset + var->red.length;
}
var->height = var->width = -1;
{
struct pm3_par *par = info->par;
const u32 xres = (info->var.xres + 31) & ~31;
- const int depth = (info->var.bits_per_pixel + 7) & ~7;
+ const unsigned bpp = info->var.bits_per_pixel;
- par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
- (info->var.yoffset * xres)
+ par->base = pm3fb_shift_bpp(bpp,(info->var.yoffset * xres)
+ info->var.xoffset);
par->video = 0;
par->video |= PM3VideoControl_DISABLE;
DPRINTK("PM3Video disabled\n");
}
- switch (depth) {
+ switch (bpp) {
case 8:
par->video |= PM3VideoControl_PIXELSIZE_8BIT;
break;
- case 12:
- case 15:
case 16:
par->video |= PM3VideoControl_PIXELSIZE_16BIT;
break;
}
info->fix.visual =
- (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+ (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
info->fix.line_length = ((info->var.xres_virtual + 7) & ~7)
- * depth / 8;
+ * bpp / 8;
/* pm3fb_clear_memory(info, 0);*/
pm3fb_clear_colormap(par, 0, 0, 0);
* var->{color}.length contains length of bitfield
* {hardwarespecific} contains width of DAC
* pseudo_palette[X] is programmed to (X << red.offset) |
- * (X << green.offset) |
- * (X << blue.offset)
+ * (X << green.offset) |
+ * (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = SUM(var->{color}.length)
*
case 8:
break;
case 16:
- case 24:
case 32:
((u32*)(info->pseudo_palette))[regno] = v;
break;
par->base = pm3fb_shift_bpp(var->bits_per_pixel,
(var->yoffset * xres)
+ var->xoffset);
- PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+ PM3_WAIT(par, 1);
+ PM3_WRITE_REG(par, PM3ScreenBase, par->base);
return 0;
}
switch (blank_mode) {
case FB_BLANK_UNBLANK:
- video = video | PM3VideoControl_ENABLE;
+ video |= PM3VideoControl_ENABLE;
break;
- case FB_BLANK_NORMAL: /* FIXME */
- video = video & ~(PM3VideoControl_ENABLE);
+ case FB_BLANK_NORMAL:
+ video &= ~(PM3VideoControl_ENABLE);
break;
case FB_BLANK_HSYNC_SUSPEND:
- video = video & ~(PM3VideoControl_HSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
+ video &= ~(PM3VideoControl_HSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
case FB_BLANK_VSYNC_SUSPEND:
- video = video & ~(PM3VideoControl_VSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
+ video &= ~(PM3VideoControl_VSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
case FB_BLANK_POWERDOWN:
- video = video & ~(PM3VideoControl_HSYNC_MASK |
- PM3VideoControl_VSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
+ video &= ~(PM3VideoControl_HSYNC_MASK |
+ PM3VideoControl_VSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
default:
DPRINTK("Unsupported blanking %d\n", blank_mode);
return 1;
}
- PM3_SLOW_WRITE_REG(par,PM3VideoControl, video);
-
+ PM3_WAIT(par, 1);
+ PM3_WRITE_REG(par,PM3VideoControl, video);
return 0;
}
.fb_set_par = pm3fb_set_par,
.fb_setcolreg = pm3fb_setcolreg,
.fb_pan_display = pm3fb_pan_display,
- .fb_fillrect = cfb_fillrect, /* Needed !!! */
- .fb_copyarea = cfb_copyarea, /* Needed !!! */
- .fb_imageblit = cfb_imageblit, /* Needed !!! */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
.fb_blank = pm3fb_blank,
};
unsigned long memsize = 0, tempBypass, i, temp1, temp2;
unsigned char __iomem *screen_mem;
- pm3fb_fix.smem_len = 64 * 1024 * 1024; /* request full aperture size */
+ pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */
/* Linear frame buffer - request region and map it. */
if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
"pm3fb smem")) {
DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
- PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
+ PM3_WAIT(par, 1);
+ PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
/* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
for (i = 0; i < 32; i++) {
if (memsize + 1 == i) {
for (i = 0; i < 32; i++) {
/* Clear first 32MB ; 0 is 0, no need to byteswap */
- writel(0x0000000,
- (screen_mem + (i * 1048576)));
- mb();
+ writel(0x0000000, (screen_mem + (i * 1048576)));
}
+ wmb();
for (i = 32; i < 64; i++) {
fb_writel(i * 0x00345678,
}
DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
- PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
+ PM3_WAIT(par, 1);
+ PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
iounmap(screen_mem);
release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
goto err_exit_both;
}
- /* This has to been done !!! */
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
retval = -ENOMEM;
goto err_exit_both;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
- pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
+ pci_set_drvdata(dev, info);
return 0;
err_exit_all:
static struct pci_device_id pm3fb_id_table[] = {
{ PCI_VENDOR_ID_3DLABS, 0x0a,
- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
- 0xff0000, 0 },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
+#ifndef MODULE
+ /*
+ * Setup
+ */
+
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+static int __init pm3fb_setup(char *options)
+{
+ /* Parse user speficied options (`video=pm3fb:') */
+ return 0;
+}
+#endif /* MODULE */
+
int __init pm3fb_init(void)
{
/*
pci_unregister_driver(&pm3fb_driver);
}
-#ifndef MODULE
- /*
- * Setup
- */
-
-/*
- * Only necessary if your driver takes special options,
- * otherwise we fall back on the generic fb_setup().
- */
-int __init pm3fb_setup(char *options)
-{
- /* Parse user speficied options (`video=pm3fb:') */
- return 0;
-}
-#endif /* MODULE */
-
module_init(pm3fb_init);
module_exit(pm3fb_exit);
static struct fb_ops ps3fb_ops = {
.fb_open = ps3fb_open,
.fb_release = ps3fb_release,
+ .fb_read = fb_sys_read,
+ .fb_write = fb_sys_write,
.fb_check_var = ps3fb_check_var,
.fb_set_par = ps3fb_set_par,
.fb_setcolreg = ps3fb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
+ .fb_fillrect = sys_fillrect,
+ .fb_copyarea = sys_copyarea,
+ .fb_imageblit = sys_imageblit,
.fb_mmap = ps3fb_mmap,
.fb_blank = ps3fb_blank,
.fb_ioctl = ps3fb_ioctl,
err = -ENODEV;
goto out;
}
- printk(" at 0x%08lx.\n", mem->start+W100_CFG_BASE);
+ printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE);
/* Remap the framebuffer */
remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
goto out;
}
- device_create_file(&pdev->dev, &dev_attr_fastpllclk);
- device_create_file(&pdev->dev, &dev_attr_reg_read);
- device_create_file(&pdev->dev, &dev_attr_reg_write);
- device_create_file(&pdev->dev, &dev_attr_flip);
+ err = device_create_file(&pdev->dev, &dev_attr_fastpllclk);
+ err |= device_create_file(&pdev->dev, &dev_attr_reg_read);
+ err |= device_create_file(&pdev->dev, &dev_attr_reg_write);
+ err |= device_create_file(&pdev->dev, &dev_attr_flip);
+
+ if (err != 0)
+ printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
+ info->node, err);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
return 0;
compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout)
{
fd_set_bits fds;
- char *bits;
+ void *bits;
int size, max_fds, ret = -EINVAL;
struct fdtable *fdt;
+ long stack_fds[SELECT_STACK_ALLOC/sizeof(long)];
if (n < 0)
goto out_nofds;
* since we used fdset we need to allocate memory in units of
* long-words.
*/
- ret = -ENOMEM;
size = FDS_BYTES(n);
- bits = kmalloc(6 * size, GFP_KERNEL);
- if (!bits)
- goto out_nofds;
+ bits = stack_fds;
+ if (size > sizeof(stack_fds) / 6) {
+ bits = kmalloc(6 * size, GFP_KERNEL);
+ ret = -ENOMEM;
+ if (!bits)
+ goto out_nofds;
+ }
fds.in = (unsigned long *) bits;
fds.out = (unsigned long *) (bits + size);
fds.ex = (unsigned long *) (bits + 2*size);
compat_set_fd_set(n, exp, fds.res_ex))
ret = -EFAULT;
out:
- kfree(bits);
+ if (bits != stack_fds)
+ kfree(bits);
out_nofds:
return ret;
}
#include <linux/fs_stack.h>
#include "ecryptfs_kernel.h"
-/**
- * ecryptfs_llseek
- * @file: File we are seeking in
- * @offset: The offset to seek to
- * @origin: 2 - offset from i_size; 1 - offset from f_pos
- *
- * Returns the position we have seeked to, or negative on error
- */
-static loff_t ecryptfs_llseek(struct file *file, loff_t offset, int origin)
-{
- loff_t rv;
- loff_t new_end_pos;
- int rc;
- int expanding_file = 0;
- struct inode *inode = file->f_mapping->host;
-
- /* If our offset is past the end of our file, we're going to
- * need to grow it so we have a valid length of 0's */
- new_end_pos = offset;
- switch (origin) {
- case 2:
- new_end_pos += i_size_read(inode);
- expanding_file = 1;
- break;
- case 1:
- new_end_pos += file->f_pos;
- if (new_end_pos > i_size_read(inode)) {
- ecryptfs_printk(KERN_DEBUG, "new_end_pos(=[0x%.16x]) "
- "> i_size_read(inode)(=[0x%.16x])\n",
- new_end_pos, i_size_read(inode));
- expanding_file = 1;
- }
- break;
- default:
- if (new_end_pos > i_size_read(inode)) {
- ecryptfs_printk(KERN_DEBUG, "new_end_pos(=[0x%.16x]) "
- "> i_size_read(inode)(=[0x%.16x])\n",
- new_end_pos, i_size_read(inode));
- expanding_file = 1;
- }
- }
- ecryptfs_printk(KERN_DEBUG, "new_end_pos = [0x%.16x]\n", new_end_pos);
- if (expanding_file) {
- rc = ecryptfs_truncate(file->f_path.dentry, new_end_pos);
- if (rc) {
- rv = rc;
- ecryptfs_printk(KERN_ERR, "Error on attempt to "
- "truncate to (higher) offset [0x%.16x];"
- " rc = [%d]\n", new_end_pos, rc);
- goto out;
- }
- }
- rv = generic_file_llseek(file, offset, origin);
-out:
- return rv;
-}
-
/**
* ecryptfs_read_update_atime
*
};
const struct file_operations ecryptfs_main_fops = {
- .llseek = ecryptfs_llseek,
+ .llseek = generic_file_llseek,
.read = do_sync_read,
.aio_read = ecryptfs_read_update_atime,
.write = do_sync_write,
return 0;
}
+/**
+ * eCryptfs does not currently support holes. When writing after a
+ * seek past the end of the file, eCryptfs fills in 0's through to the
+ * current location. The code to fill in the 0's to all the
+ * intermediate pages calls ecryptfs_prepare_write_no_truncate().
+ */
+static int
+ecryptfs_prepare_write_no_truncate(struct file *file, struct page *page,
+ unsigned from, unsigned to)
+{
+ int rc = 0;
+
+ if (from == 0 && to == PAGE_CACHE_SIZE)
+ goto out; /* If we are writing a full page, it will be
+ up to date. */
+ if (!PageUptodate(page))
+ rc = ecryptfs_do_readpage(file, page, page->index);
+out:
+ return rc;
+}
+
static int ecryptfs_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
+ loff_t pos;
int rc = 0;
if (from == 0 && to == PAGE_CACHE_SIZE)
up to date. */
if (!PageUptodate(page))
rc = ecryptfs_do_readpage(file, page, page->index);
+ pos = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to;
+ if (pos > i_size_read(page->mapping->host)) {
+ rc = ecryptfs_truncate(file->f_path.dentry, pos);
+ if (rc) {
+ printk(KERN_ERR "Error on attempt to "
+ "truncate to (higher) offset [%lld];"
+ " rc = [%d]\n", pos, rc);
+ goto out;
+ }
+ }
out:
return rc;
}
rc = PTR_ERR(tmp_page);
goto out;
}
- rc = ecryptfs_prepare_write(file, tmp_page, start, start + num_zeros);
- if (rc) {
+ if ((rc = ecryptfs_prepare_write_no_truncate(file, tmp_page, start,
+ (start + num_zeros)))) {
ecryptfs_printk(KERN_ERR, "Error preparing to write zero's "
- "to remainder of page at index [0x%.16x]\n",
+ "to page at index [0x%.16x]\n",
index);
page_cache_release(tmp_page);
goto out;
if (error)
goto out;
+ error = -EACCES;
+ if (nd.mnt->mnt_flags & MNT_NOEXEC)
+ goto exit;
error = -EINVAL;
if (!S_ISREG(nd.dentry->d_inode->i_mode))
goto exit;
static int fuse_create(struct inode *dir, struct dentry *entry, int mode,
struct nameidata *nd)
{
- if (nd && (nd->flags & LOOKUP_CREATE)) {
+ if (nd && (nd->flags & LOOKUP_OPEN)) {
int err = fuse_create_open(dir, entry, mode, nd);
if (err != -ENOSYS)
return err;
ssize_t res;
/* Don't allow parallel writes to the same file */
mutex_lock(&inode->i_mutex);
- res = fuse_direct_io(file, buf, count, ppos, 1);
+ res = generic_write_checks(file, ppos, &count, 0);
+ if (!res)
+ res = fuse_direct_io(file, buf, count, ppos, 1);
mutex_unlock(&inode->i_mutex);
return res;
}
.destroy_inode = fuse_destroy_inode,
.read_inode = fuse_read_inode,
.clear_inode = fuse_clear_inode,
+ .drop_inode = generic_delete_inode,
.remount_fs = fuse_remount_fs,
.put_super = fuse_put_super,
.umount_begin = fuse_umount_begin,
#include <linux/buffer_head.h>
#include <asm/uaccess.h>
-extern struct reiserfs_key MIN_KEY;
+extern const struct reiserfs_key MIN_KEY;
static int reiserfs_readdir(struct file *, void *, filldir_t);
static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
* Now using anonymous inode source.
* Thanks to Oleg Nesterov for useful code review and suggestions.
* More comments and suggestions from Arnd Bergmann.
+ * Sat May 19, 2007: Davi E. M. Arnaut <davi@haxent.com.br>
+ * Retrieve multiple signals with one read() call
*/
#include <linux/file.h>
return err ? -EFAULT: sizeof(*uinfo);
}
+static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,
+ int nonblock)
+{
+ ssize_t ret;
+ struct signalfd_lockctx lk;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (!signalfd_lock(ctx, &lk))
+ return 0;
+
+ ret = dequeue_signal(lk.tsk, &ctx->sigmask, info);
+ switch (ret) {
+ case 0:
+ if (!nonblock)
+ break;
+ ret = -EAGAIN;
+ default:
+ signalfd_unlock(&lk);
+ return ret;
+ }
+
+ add_wait_queue(&ctx->wqh, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ ret = dequeue_signal(lk.tsk, &ctx->sigmask, info);
+ signalfd_unlock(&lk);
+ if (ret != 0)
+ break;
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ ret = signalfd_lock(ctx, &lk);
+ if (unlikely(!ret)) {
+ /*
+ * Let the caller read zero byte, ala socket
+ * recv() when the peer disconnect. This test
+ * must be done before doing a dequeue_signal(),
+ * because if the sighand has been orphaned,
+ * the dequeue_signal() call is going to crash
+ * because ->sighand will be long gone.
+ */
+ break;
+ }
+ }
+
+ remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+
+ return ret;
+}
+
/*
* Returns either the size of a "struct signalfd_siginfo", or zero if the
* sighand we are attached to, has been orphaned. The "count" parameter
loff_t *ppos)
{
struct signalfd_ctx *ctx = file->private_data;
- ssize_t res = 0;
- int locked, signo;
+ struct signalfd_siginfo __user *siginfo;
+ int nonblock = file->f_flags & O_NONBLOCK;
+ ssize_t ret, total = 0;
siginfo_t info;
- struct signalfd_lockctx lk;
- DECLARE_WAITQUEUE(wait, current);
- if (count < sizeof(struct signalfd_siginfo))
+ count /= sizeof(struct signalfd_siginfo);
+ if (!count)
return -EINVAL;
- locked = signalfd_lock(ctx, &lk);
- if (!locked)
- return 0;
- res = -EAGAIN;
- signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
- if (signo == 0 && !(file->f_flags & O_NONBLOCK)) {
- add_wait_queue(&ctx->wqh, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
- if (signo != 0)
- break;
- if (signal_pending(current)) {
- res = -ERESTARTSYS;
- break;
- }
- signalfd_unlock(&lk);
- schedule();
- locked = signalfd_lock(ctx, &lk);
- if (unlikely(!locked)) {
- /*
- * Let the caller read zero byte, ala socket
- * recv() when the peer disconnect. This test
- * must be done before doing a dequeue_signal(),
- * because if the sighand has been orphaned,
- * the dequeue_signal() call is going to crash.
- */
- res = 0;
- break;
- }
- }
- remove_wait_queue(&ctx->wqh, &wait);
- __set_current_state(TASK_RUNNING);
- }
- if (likely(locked))
- signalfd_unlock(&lk);
- if (likely(signo))
- res = signalfd_copyinfo((struct signalfd_siginfo __user *) buf,
- &info);
- return res;
+ siginfo = (struct signalfd_siginfo __user *) buf;
+
+ do {
+ ret = signalfd_dequeue(ctx, &info, nonblock);
+ if (unlikely(ret <= 0))
+ break;
+ ret = signalfd_copyinfo(siginfo, &info);
+ if (ret < 0)
+ break;
+ siginfo++;
+ total += ret;
+ nonblock = 1;
+ } while (--count);
+
+ return total ? total : ret;
}
static const struct file_operations signalfd_fops = {
int __i;
#ifdef CONFIG_M386
unsigned long flags;
- if(unlikely(boot_cpu_data.x86==3))
+ if(unlikely(boot_cpu_data.x86 <= 3))
goto no_xadd;
#endif
/* Modern 486+ processor */
long __i;
#ifdef CONFIG_M386
unsigned long flags;
- if(unlikely(boot_cpu_data.x86==3))
+ if(unlikely(boot_cpu_data.x86 <= 3))
goto no_xadd;
#endif
/* Modern 486+ processor */
#include <linux/types.h>
#include <linux/compiler.h>
+struct task_struct;
+
/* User-level do most of the mapping between kernel and user
capabilities based on the version tag given by the kernel. The
kernel might be somewhat backwards compatible, but don't bet on
/*
* Wake up a frozen process
+ *
+ * task_lock() is taken to prevent the race with refrigerator() which may
+ * occur if the freezing of tasks fails. Namely, without the lock, if the
+ * freezing of tasks failed, thaw_tasks() might have run before a task in
+ * refrigerator() could call frozen_process(), in which case the task would be
+ * frozen and no one would thaw it.
*/
static inline int thaw_process(struct task_struct *p)
{
+ task_lock(p);
if (frozen(p)) {
p->flags &= ~PF_FROZEN;
+ task_unlock(p);
wake_up_process(p);
return 1;
}
- return 0;
-}
-
-/*
- * freezing is complete, mark process as frozen
- */
-static inline void frozen_process(struct task_struct *p)
-{
- p->flags |= PF_FROZEN;
- wmb();
clear_tsk_thread_flag(p, TIF_FREEZE);
+ task_unlock(p);
+ return 0;
}
extern void refrigerator(void);
return 0;
}
-extern void thaw_some_processes(int all);
+/*
+ * The PF_FREEZER_SKIP flag should be set by a vfork parent right before it
+ * calls wait_for_completion(&vfork) and reset right after it returns from this
+ * function. Next, the parent should call try_to_freeze() to freeze itself
+ * appropriately in case the child has exited before the freezing of tasks is
+ * complete. However, we don't want kernel threads to be frozen in unexpected
+ * places, so we allow them to block freeze_processes() instead or to set
+ * PF_NOFREEZE if needed and PF_FREEZER_SKIP is only set for userland vfork
+ * parents. Fortunately, in the ____call_usermodehelper() case the parent won't
+ * really block freeze_processes(), since ____call_usermodehelper() (the child)
+ * does a little before exec/exit and it can't be frozen before waking up the
+ * parent.
+ */
+
+/*
+ * If the current task is a user space one, tell the freezer not to count it as
+ * freezable.
+ */
+static inline void freezer_do_not_count(void)
+{
+ if (current->mm)
+ current->flags |= PF_FREEZER_SKIP;
+}
+
+/*
+ * If the current task is a user space one, tell the freezer to count it as
+ * freezable again and try to freeze it.
+ */
+static inline void freezer_count(void)
+{
+ if (current->mm) {
+ current->flags &= ~PF_FREEZER_SKIP;
+ try_to_freeze();
+ }
+}
+
+/*
+ * Check if the task should be counted as freezeable by the freezer
+ */
+static inline int freezer_should_skip(struct task_struct *p)
+{
+ return !!(p->flags & PF_FREEZER_SKIP);
+}
#else
static inline int frozen(struct task_struct *p) { return 0; }
static inline int freezing(struct task_struct *p) { return 0; }
static inline void freeze(struct task_struct *p) { BUG(); }
static inline int thaw_process(struct task_struct *p) { return 1; }
-static inline void frozen_process(struct task_struct *p) { BUG(); }
static inline void refrigerator(void) {}
static inline int freeze_processes(void) { BUG(); return 0; }
static inline int try_to_freeze(void) { return 0; }
-
+static inline void freezer_do_not_count(void) {}
+static inline void freezer_count(void) {}
+static inline int freezer_should_skip(struct task_struct *p) { return 0; }
#endif
#include <linux/smp.h>
#include <linux/string.h>
#include <linux/fs.h>
+#include <linux/workqueue.h>
struct partition {
unsigned char boot_ind; /* 0x80 - active */
#define GENHD_FL_REMOVABLE 1
#define GENHD_FL_DRIVERFS 2
+#define GENHD_FL_MEDIA_CHANGE_NOTIFY 4
#define GENHD_FL_CD 8
#define GENHD_FL_UP 16
#define GENHD_FL_SUPPRESS_PARTITION_INFO 32
#else
struct disk_stats dkstats;
#endif
+ struct work_struct async_notify;
};
/* Structure for sysfs attributes on block devices */
extern struct gendisk *alloc_disk(int minors);
extern struct kobject *get_disk(struct gendisk *disk);
extern void put_disk(struct gendisk *disk);
-
+extern void genhd_media_change_notify(struct gendisk *disk);
extern void blk_register_region(dev_t dev, unsigned long range,
struct module *module,
struct kobject *(*probe)(dev_t, int *, void *),
#define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
+#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
struct page **filemap; /* list of cache pages for the file */
unsigned long *filemap_attr; /* attributes associated w/ filemap pages */
unsigned long file_pages; /* number of pages in the file */
+ int last_page_size; /* bytes in the last page */
unsigned long flags;
#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
#define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */
+#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */
/*
* Only the _current_ task can read/write to tsk->flags, but other
return 0;
}
-/* Reevaluate whether the task has signals pending delivery.
- This is required every time the blocked sigset_t changes.
- callers must hold sighand->siglock. */
-
-extern FASTCALL(void recalc_sigpending_tsk(struct task_struct *t));
+/*
+ * Reevaluate whether the task has signals pending delivery.
+ * Wake the task if so.
+ * This is required every time the blocked sigset_t changes.
+ * callers must hold sighand->siglock.
+ */
+extern void recalc_sigpending_and_wake(struct task_struct *t);
extern void recalc_sigpending(void);
extern void signal_wake_up(struct task_struct *t, int resume_stopped);
read_lock(&tasklist_lock);
spin_lock_irq(&tsk->sighand->siglock);
for (t = next_thread(tsk); t != tsk; t = next_thread(t))
- if (!signal_pending(t) && !(t->flags & PF_EXITING)) {
- recalc_sigpending_tsk(t);
- if (signal_pending(t))
- signal_wake_up(t, 0);
- }
+ if (!signal_pending(t) && !(t->flags & PF_EXITING))
+ recalc_sigpending_and_wake(t);
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
}
#include <linux/acct.h>
#include <linux/tsacct_kern.h>
#include <linux/cn_proc.h>
+#include <linux/freezer.h>
#include <linux/delayacct.h>
#include <linux/taskstats_kern.h>
#include <linux/random.h>
}
if (clone_flags & CLONE_VFORK) {
+ freezer_do_not_count();
wait_for_completion(&vfork);
+ freezer_count();
if (unlikely (current->ptrace & PT_TRACE_VFORK_DONE)) {
current->ptrace_message = nr;
ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP);
}
}
+static inline int try_misrouted_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret)
+{
+ struct irqaction *action;
+
+ if (!irqfixup)
+ return 0;
+
+ /* We didn't actually handle the IRQ - see if it was misrouted? */
+ if (action_ret == IRQ_NONE)
+ return 1;
+
+ /*
+ * But for 'irqfixup == 2' we also do it for handled interrupts if
+ * they are marked as IRQF_IRQPOLL (or for irq zero, which is the
+ * traditional PC timer interrupt.. Legacy)
+ */
+ if (irqfixup < 2)
+ return 0;
+
+ if (!irq)
+ return 1;
+
+ /*
+ * Since we don't get the descriptor lock, "action" can
+ * change under us. We don't really care, but we don't
+ * want to follow a NULL pointer. So tell the compiler to
+ * just load it once by using a barrier.
+ */
+ action = desc->action;
+ barrier();
+ return action && (action->flags & IRQF_IRQPOLL);
+}
+
void note_interrupt(unsigned int irq, struct irq_desc *desc,
irqreturn_t action_ret)
{
report_bad_irq(irq, desc, action_ret);
}
- if (unlikely(irqfixup)) {
- /* Don't punish working computers */
- if ((irqfixup == 2 && ((irq == 0) ||
- (desc->action->flags & IRQF_IRQPOLL))) ||
- action_ret == IRQ_NONE) {
- int ok = misrouted_irq(irq);
- if (action_ret == IRQ_NONE)
- desc->irqs_unhandled -= ok;
- }
+ if (unlikely(try_misrouted_irq(irq, desc, action_ret))) {
+ int ok = misrouted_irq(irq);
+ if (action_ret == IRQ_NONE)
+ desc->irqs_unhandled -= ok;
}
desc->irq_count++;
data = create->data;
/* OK, tell user we're spawned, wait for stop or wakeup */
- __set_current_state(TASK_INTERRUPTIBLE);
+ __set_current_state(TASK_UNINTERRUPTIBLE);
complete(&create->started);
schedule();
*/
void kthread_bind(struct task_struct *k, unsigned int cpu)
{
- BUG_ON(k->state != TASK_INTERRUPTIBLE);
+ if (k->state != TASK_UNINTERRUPTIBLE) {
+ WARN_ON(1);
+ return;
+ }
/* Must have done schedule() in kthread() before we set_task_cpu */
wait_task_inactive(k);
set_task_cpu(k, cpu);
return 1;
}
+/*
+ * freezing is complete, mark current process as frozen
+ */
+static inline void frozen_process(void)
+{
+ if (!unlikely(current->flags & PF_NOFREEZE)) {
+ current->flags |= PF_FROZEN;
+ wmb();
+ }
+ clear_tsk_thread_flag(current, TIF_FREEZE);
+}
+
/* Refrigerator is place where frozen processes are stored :-). */
void refrigerator(void)
{
/* Hmm, should we be allowed to suspend when there are realtime
processes around? */
long save;
+
+ task_lock(current);
+ if (freezing(current)) {
+ frozen_process();
+ task_unlock(current);
+ } else {
+ task_unlock(current);
+ return;
+ }
save = current->state;
pr_debug("%s entered refrigerator\n", current->comm);
- frozen_process(current);
spin_lock_irq(¤t->sighand->siglock);
recalc_sigpending(); /* We sent fake signal, clean it up */
spin_unlock_irq(¤t->sighand->siglock);
pr_debug(" clean up: %s\n", p->comm);
do_not_freeze(p);
spin_lock_irqsave(&p->sighand->siglock, flags);
- recalc_sigpending_tsk(p);
+ recalc_sigpending_and_wake(p);
spin_unlock_irqrestore(&p->sighand->siglock, flags);
}
}
cancel_freezing(p);
continue;
}
- if (is_user_space(p)) {
- if (!freeze_user_space)
- continue;
-
- /* Freeze the task unless there is a vfork
- * completion pending
- */
- if (!p->vfork_done)
- freeze_process(p);
- } else {
- if (freeze_user_space)
- continue;
-
- freeze_process(p);
- }
- todo++;
+ if (freeze_user_space && !is_user_space(p))
+ continue;
+
+ freeze_process(p);
+ if (!freezer_should_skip(p))
+ todo++;
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
yield(); /* Yield is okay here */
TIMEOUT / HZ, todo);
read_lock(&tasklist_lock);
do_each_thread(g, p) {
- if (is_user_space(p) == !freeze_user_space)
+ if (freeze_user_space && !is_user_space(p))
continue;
- if (freezeable(p) && !frozen(p))
+ task_lock(p);
+ if (freezeable(p) && !frozen(p) &&
+ !freezer_should_skip(p))
printk(KERN_ERR " %s\n", p->comm);
cancel_freezing(p);
+ task_unlock(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
}
if (is_user_space(p) == !thaw_user_space)
continue;
- if (!thaw_process(p))
- printk(KERN_WARNING " Strange, %s not stopped\n",
- p->comm );
+ thaw_process(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
}
resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ);
if (!IS_ERR(resume_bdev)) {
set_blocksize(resume_bdev, PAGE_SIZE);
- memset(swsusp_header, 0, sizeof(PAGE_SIZE));
+ memset(swsusp_header, 0, PAGE_SIZE);
error = bio_read_page(swsusp_resume_block,
swsusp_header, NULL);
if (error)
BUG_ON(!in_softirq());
if (need_resched() && system_state == SYSTEM_RUNNING) {
- raw_local_irq_disable();
- _local_bh_enable();
- raw_local_irq_enable();
+ local_bh_enable();
__cond_resched();
local_bh_disable();
return 1;
#define PENDING(p,b) has_pending_signals(&(p)->signal, (b))
-fastcall void recalc_sigpending_tsk(struct task_struct *t)
+static int recalc_sigpending_tsk(struct task_struct *t)
{
if (t->signal->group_stop_count > 0 ||
(freezing(t)) ||
PENDING(&t->pending, &t->blocked) ||
- PENDING(&t->signal->shared_pending, &t->blocked))
+ PENDING(&t->signal->shared_pending, &t->blocked)) {
set_tsk_thread_flag(t, TIF_SIGPENDING);
- else
- clear_tsk_thread_flag(t, TIF_SIGPENDING);
+ return 1;
+ }
+ clear_tsk_thread_flag(t, TIF_SIGPENDING);
+ return 0;
+}
+
+/*
+ * After recalculating TIF_SIGPENDING, we need to make sure the task wakes up.
+ * This is superfluous when called on current, the wakeup is a harmless no-op.
+ */
+void recalc_sigpending_and_wake(struct task_struct *t)
+{
+ if (recalc_sigpending_tsk(t))
+ signal_wake_up(t, 0);
}
void recalc_sigpending(void)
action->sa.sa_handler = SIG_DFL;
if (blocked) {
sigdelset(&t->blocked, sig);
- recalc_sigpending_tsk(t);
+ recalc_sigpending_and_wake(t);
}
}
ret = specific_send_sig_info(sig, info, t);
rm_from_queue_full(&mask, &t->signal->shared_pending);
do {
rm_from_queue_full(&mask, &t->pending);
- recalc_sigpending_tsk(t);
+ recalc_sigpending_and_wake(t);
t = next_thread(t);
} while (t != current);
}
{
int cpu = get_cpu();
- if (cpu == *oncpu)
- tick_do_broadcast_on_off(&reason);
- else
- smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
- &reason, 1, 1);
+ if (!cpu_isset(*oncpu, cpu_online_map)) {
+ printk(KERN_ERR "tick-braodcast: ignoring broadcast for "
+ "offline CPU #%d\n", *oncpu);
+ } else {
+
+ if (cpu == *oncpu)
+ tick_do_broadcast_on_off(&reason);
+ else
+ smp_call_function_single(*oncpu,
+ tick_do_broadcast_on_off,
+ &reason, 1, 1);
+ }
put_cpu();
}
goto end;
cpu = smp_processor_id();
- if (unlikely(local_softirq_pending()))
- printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
- local_softirq_pending());
+ if (unlikely(local_softirq_pending())) {
+ static int ratelimit;
+
+ if (ratelimit < 10) {
+ printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
+ local_softirq_pending());
+ ratelimit++;
+ }
+ }
now = ktime_get();
/*
struct workqueue_struct *wq;
struct task_struct *thread;
- int should_stop;
int run_depth; /* Detect run_workqueue() recursion depth */
} ____cacheline_aligned;
static int singlethread_cpu __read_mostly;
static cpumask_t cpu_singlethread_map __read_mostly;
-/* optimization, we could use cpu_possible_map */
+/*
+ * _cpu_down() first removes CPU from cpu_online_map, then CPU_DEAD
+ * flushes cwq->worklist. This means that flush_workqueue/wait_on_work
+ * which comes in between can't use for_each_online_cpu(). We could
+ * use cpu_possible_map, the cpumask below is more a documentation
+ * than optimization.
+ */
static cpumask_t cpu_populated_map __read_mostly;
/* If it's single threaded, it isn't in the list of workqueues. */
spin_unlock_irq(&cwq->lock);
}
-/*
- * NOTE: the caller must not touch *cwq if this func returns true
- */
-static int cwq_should_stop(struct cpu_workqueue_struct *cwq)
-{
- int should_stop = cwq->should_stop;
-
- if (unlikely(should_stop)) {
- spin_lock_irq(&cwq->lock);
- should_stop = cwq->should_stop && list_empty(&cwq->worklist);
- if (should_stop)
- cwq->thread = NULL;
- spin_unlock_irq(&cwq->lock);
- }
-
- return should_stop;
-}
-
static int worker_thread(void *__cwq)
{
struct cpu_workqueue_struct *cwq = __cwq;
for (;;) {
prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE);
- if (!freezing(current) && !cwq->should_stop
- && list_empty(&cwq->worklist))
+ if (!freezing(current) &&
+ !kthread_should_stop() &&
+ list_empty(&cwq->worklist))
schedule();
finish_wait(&cwq->more_work, &wait);
try_to_freeze();
- if (cwq_should_stop(cwq))
+ if (kthread_should_stop())
break;
run_workqueue(cwq);
insert_work(cwq, &barr->work, tail);
}
-static void flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
+static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
{
+ int active;
+
if (cwq->thread == current) {
/*
* Probably keventd trying to flush its own queue. So simply run
* it by hand rather than deadlocking.
*/
run_workqueue(cwq);
+ active = 1;
} else {
struct wq_barrier barr;
- int active = 0;
+ active = 0;
spin_lock_irq(&cwq->lock);
if (!list_empty(&cwq->worklist) || cwq->current_work != NULL) {
insert_wq_barrier(cwq, &barr, 1);
if (active)
wait_for_completion(&barr.done);
}
+
+ return active;
}
/**
return PTR_ERR(p);
cwq->thread = p;
- cwq->should_stop = 0;
return 0;
}
static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu)
{
- struct wq_barrier barr;
- int alive = 0;
-
- spin_lock_irq(&cwq->lock);
- if (cwq->thread != NULL) {
- insert_wq_barrier(cwq, &barr, 1);
- cwq->should_stop = 1;
- alive = 1;
- }
- spin_unlock_irq(&cwq->lock);
+ /*
+ * Our caller is either destroy_workqueue() or CPU_DEAD,
+ * workqueue_mutex protects cwq->thread
+ */
+ if (cwq->thread == NULL)
+ return;
- if (alive) {
- wait_for_completion(&barr.done);
+ /*
+ * If the caller is CPU_DEAD the single flush_cpu_workqueue()
+ * is not enough, a concurrent flush_workqueue() can insert a
+ * barrier after us.
+ * When ->worklist becomes empty it is safe to exit because no
+ * more work_structs can be queued on this cwq: flush_workqueue
+ * checks list_empty(), and a "normal" queue_work() can't use
+ * a dead CPU.
+ */
+ while (flush_cpu_workqueue(cwq))
+ ;
- while (unlikely(cwq->thread != NULL))
- cpu_relax();
- /*
- * Wait until cwq->thread unlocks cwq->lock,
- * it won't touch *cwq after that.
- */
- smp_rmb();
- spin_unlock_wait(&cwq->lock);
- }
+ kthread_stop(cwq->thread);
+ cwq->thread = NULL;
}
/**
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
+ depends on m
default n
help
This option provides a kernel module that runs torture tests
on the RCU infrastructure. The kernel module may be built
after the fact on the running kernel to be tested, if desired.
- Say Y here if you want RCU torture tests to start automatically
- at boot time (you probably don't).
Say M if you want the RCU torture tests to build as a module.
Say N if you are unsure.
#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+#if MAX_NUMNODES > 1
+int nr_node_ids __read_mostly = MAX_NUMNODES;
+EXPORT_SYMBOL(nr_node_ids);
+#endif
+
#ifdef CONFIG_DEBUG_VM
static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
{
return i;
}
-#if MAX_NUMNODES > 1
-int nr_node_ids __read_mostly = MAX_NUMNODES;
-EXPORT_SYMBOL(nr_node_ids);
-
-/*
- * Figure out the number of possible node ids.
- */
-static void __init setup_nr_node_ids(void)
-{
- unsigned int node;
- unsigned int highest = 0;
-
- for_each_node_mask(node, node_possible_map)
- highest = node;
- nr_node_ids = highest + 1;
-}
-#else
-static void __init setup_nr_node_ids(void) {}
-#endif
-
#ifdef CONFIG_NUMA
/*
* Called from the vmstat counter updater to drain pagesets of this
}
#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+
+#if MAX_NUMNODES > 1
+/*
+ * Figure out the number of possible node ids.
+ */
+static void __init setup_nr_node_ids(void)
+{
+ unsigned int node;
+ unsigned int highest = 0;
+
+ for_each_node_mask(node, node_possible_map)
+ highest = node;
+ nr_node_ids = highest + 1;
+}
+#else
+static inline void setup_nr_node_ids(void)
+{
+}
+#endif
+
/**
* add_active_range - Register a range of PFNs backed by physical memory
* @nid: The node ID the range resides on
* Debugging or ctor may create a need to move the free
* pointer. Fail if this happens.
*/
- if (s->size >= 65535 * sizeof(void *)) {
+ if (s->objsize >= 65535 * sizeof(void *)) {
BUG_ON(s->flags & (SLAB_RED_ZONE | SLAB_POISON |
SLAB_STORE_USER | SLAB_DESTROY_BY_RCU));
BUG_ON(s->ctor);
*/
s->inuse = size;
-#ifdef CONFIG_SLUB_DEBUG
if (((flags & (SLAB_DESTROY_BY_RCU | SLAB_POISON)) ||
s->ctor)) {
/*
size += sizeof(void *);
}
+#ifdef CONFIG_SLUB_DEBUG
if (flags & SLAB_STORE_USER)
/*
* Need to store information about allocs and frees after