Input: ads7846 - add regulator support

The ADS7846/TSC2046 touchscreen controllers can (and usually are)
connected to various regulators for power, so add regulator support.

Valid regulator will now be required, so boards without complete
regulator setup should either disable regulator framework or enable
CONFIG_REGULATOR_DUMMY.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 52d2ca147d8f004a3f24c4d5df4a80365300bd4c..8b05d8e975437501d73378d401e90a857db72d40 100644 (file)
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/consumer.h>
 #include <asm/irq.h>
 
 /*
@@ -85,6 +86,7 @@ struct ads7846 {
        char                    name[32];
 
        struct spi_device       *spi;
+       struct regulator        *reg;
 
 #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
        struct attribute_group  *attr_group;
@@ -788,6 +790,8 @@ static void ads7846_disable(struct ads7846 *ts)
                }
        }
 
+       regulator_disable(ts->reg);
+
        /* we know the chip's in lowpower mode since we always
         * leave it that way after every request
         */
@@ -799,6 +803,8 @@ static void ads7846_enable(struct ads7846 *ts)
        if (!ts->disabled)
                return;
 
+       regulator_enable(ts->reg);
+
        ts->disabled = 0;
        ts->irq_disabled = 0;
        enable_irq(ts->spi->irq);
@@ -1139,6 +1145,19 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
        ts->last_msg = m;
 
+       ts->reg = regulator_get(&spi->dev, "vcc");
+       if (IS_ERR(ts->reg)) {
+               dev_err(&spi->dev, "unable to get regulator: %ld\n",
+                       PTR_ERR(ts->reg));
+               goto err_free_gpio;
+       }
+
+       err = regulator_enable(ts->reg);
+       if (err) {
+               dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
+               goto err_put_regulator;
+       }
+
        if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
                        spi->dev.driver->name, ts)) {
                dev_info(&spi->dev,
@@ -1148,7 +1167,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
                                  spi->dev.driver->name, ts);
                if (err) {
                        dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-                       goto err_free_gpio;
+                       goto err_disable_regulator;
                }
        }
 
@@ -1180,6 +1199,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
        ads784x_hwmon_unregister(spi, ts);
  err_free_irq:
        free_irq(spi->irq, ts);
+ err_disable_regulator:
+       regulator_disable(ts->reg);
+ err_put_regulator:
+       regulator_put(ts->reg);
  err_free_gpio:
        if (ts->gpio_pendown != -1)
                gpio_free(ts->gpio_pendown);
@@ -1208,6 +1231,9 @@ static int __devexit ads7846_remove(struct spi_device *spi)
        /* suspend left the IRQ disabled */
        enable_irq(ts->spi->irq);
 
+       regulator_disable(ts->reg);
+       regulator_put(ts->reg);
+
        if (ts->gpio_pendown != -1)
                gpio_free(ts->gpio_pendown);