*.ko
*.so
*.mod.c
+*.i
+*.lst
+*.symtypes
#
# Top-level generic files
Signed-off-by: Random J Developer <random@developer.example.org>
+using your real name (sorry, no pseudonyms or anonymous contributions.)
+
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
* SA P400i
* SA E200
* SA E200i
+ * SA E500
If nodes are not already created in the /dev/cciss directory, run as root:
Who: Patrick McHardy <kaber@trash.net>
---------------------------
+
+What: frame diverter
+When: November 2006
+Why: The frame diverter is included in most distribution kernels, but is
+ broken. It does not correctly handle many things:
+ - IPV6
+ - non-linear skb's
+ - network device RCU on removal
+ - input frames not correctly checked for protocol errors
+ It also adds allocation overhead even if not enabled.
+ It is not clear if anyone is still using it.
+Who: Stephen Hemminger <shemminger@osdl.org>
+
5 ELILO
7 GRuB
8 U-BOOT
+ 9 Xen
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
2 for bootsect-loader
3 for SYSLINUX
4 for ETHERBOOT
+ 5 for ELILO
+ 7 for GRuB
+ 8 for U-BOOT
+ 9 for Xen
V = version
0x211 char loadflags:
bit0 = 1: kernel is loaded high (bzImage)
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
Mechanism 2.
nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI
Configuration
- mmconf [IA-32,X86_64] Force MMCONFIG. This is useful
- to override the builtin blacklist.
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.
TCP variables:
tcp_abc - INTEGER
- Controls Appropriate Byte Count defined in RFC3465. If set to
- 0 then does congestion avoid once per ack. 1 is conservative
- value, and 2 is more agressive.
+ Controls Appropriate Byte Count (ABC) defined in RFC3465.
+ ABC is a way of increasing congestion window (cwnd) more slowly
+ in response to partial acknowledgments.
+ Possible values are:
+ 0 increase cwnd once per acknowledgment (no ABC)
+ 1 increase cwnd once per acknowledgment of full sized segment
+ 2 allow increase cwnd by two if acknowledgment is
+ of two segments to compensate for delayed acknowledgments.
+ Default: 0 (off)
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
ATM
P: Chas Williams
M: chas@cmf.nrl.navy.mil
-L: linux-atm-general@lists.sourceforge.net
+L: linux-atm-general@lists.sourceforge.net (subscribers-only)
W: http://linux-atm.sourceforge.net
S: Maintained
L: netdev@vger.kernel.org
S: Maintained
+TCP LOW PRIORITY MODULE
+P: Wong Hoi Sing, Edison
+M: hswong3i@gmail.com
+P: Hung Hing Lun, Mike
+M: hlhung3i@gmail.com
+W: http://tcp-lp-mod.sourceforge.net/
+S: Maintained
+
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 18
-EXTRAVERSION = -rc7
-NAME=Crazed Snow-Weasel
+EXTRAVERSION =
+NAME=Avast! A bilge rat!
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# ---------------------------------------------------------------------------
# Kernel headers
-INSTALL_HDR_PATH=$(MODLIB)/abi
+INSTALL_HDR_PATH=$(objtree)/usr
export INSTALL_HDR_PATH
PHONY += headers_install
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2
+MRPROPER_DIRS += include/config include2 usr/include
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'
- @echo ' (default: /lib/modules/$$VERSION/abi)'
+ @echo ' (default: $(INSTALL_HDR_PATH))'
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
+ @echo ' headers_check - Sanity check on exported headers'
@echo ''
@echo 'Kernel packaging:'
@$(MAKE) $(build)=$(package-dir) help
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Thu Apr 6 17:05:58 2006
+# Linux kernel version: 2.6.18-rc6
+# Mon Sep 11 13:59:24 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=m
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PNX4008=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-CONFIG_ARCH_PNX4008=y
#
# Processor Type
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
#
# Kernel Features
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
# CONFIG_XIP_KERNEL is not set
#
# At least one emulation must be selected
#
-# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
-CONFIG_APM=m
+# CONFIG_APM is not set
#
# Networking
# Networking options
#
# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=m
+CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_BAYCOM_EPP=m
-CONFIG_YAM=m
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-# CONFIG_TOIM3232_DONGLE is not set
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
# CONFIG_IEEE80211_CRYPT_WEP is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# Memory Technology Devices (MTD)
#
-CONFIG_MTD=m
+CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLKMTD=m
# CONFIG_MTD_BLOCK2MTD is not set
#
#
# NAND Flash Device Drivers
#
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#
# Parallel port support
#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
+# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# Block devices
#
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
#
# SCSI device support
#
#
# CONFIG_ISCSI_TCP is not set
CONFIG_SCSI_SATA=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_DEBUG=m
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
#
# Multi-device support (RAID and LVM)
#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
+# CONFIG_MD is not set
#
# Fusion MPT device support
CONFIG_MII=m
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-CONFIG_NET_POCKET=y
-CONFIG_DE600=m
-CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
+# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
CONFIG_WAN=y
-CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
-CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
#
# ISDN subsystem
#
-CONFIG_ISDN=m
-
-#
-# Old ISDN4Linux
-#
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-
-#
-# Siemens Gigaset
-#
-# CONFIG_ISDN_DRV_GIGASET is not set
-
-#
-# CAPI subsystem
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-
-#
-# Active AVM cards
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-
-#
-# Active Eicon DIVA Server cards
-#
-CONFIG_CAPI_EICON=y
+# CONFIG_ISDN is not set
#
# Input device support
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not set
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-# CONFIG_ISI is not set
-CONFIG_SYNCLINKMP=m
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
#
# IPMI
#
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
+# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
-CONFIG_NVRAM=m
-CONFIG_DTLK=m
-CONFIG_R3964=m
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
+# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# I2C support
#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
# I2C Hardware Bus support
#
-CONFIG_I2C_ISA=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_STUB=m
-CONFIG_I2C_PCA_ISA=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
#
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
#
-CONFIG_W1=m
+CONFIG_SPI_BITBANG=y
#
-# 1-wire Bus Masters
+# SPI Protocol Masters
#
-# CONFIG_W1_MASTER_DS9490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
#
-# 1-wire Slaves
+# Dallas's 1-wire bus
#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
#
# Hardware Monitoring support
#
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-# CONFIG_SENSORS_ADM9240 is not set
-CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATXP1 is not set
-CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-CONFIG_SENSORS_FSCHER=m
-# CONFIG_SENSORS_FSCPOS is not set
-CONFIG_SENSORS_GL518SM=m
-# CONFIG_SENSORS_GL520SM is not set
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-# CONFIG_SENSORS_LM92 is not set
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47M1=m
-# CONFIG_SENSORS_SMSC47B397 is not set
-CONFIG_SENSORS_W83781D=m
-# CONFIG_SENSORS_W83792D is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83627HF=m
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
CONFIG_DVB_STV0297=m
#
-# ATSC (North American/Korean Terresterial DTV) frontends
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6421 is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SND_USB_AUDIO=m
-#
-# PCMCIA devices
-#
-
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_OSS_OBSOLETE_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_TVMIXER=m
#
# USB support
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
#
# USB Device Class drivers
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
-CONFIG_USB_USS720=m
#
# USB Serial Converter support
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TEST=m
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
#
# Native Language Support
#
-CONFIG_NLS=y
+CONFIG_NLS=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
#
# Profiling support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
depends on ARCH_S3C2440
select CPU_S3C2442
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 verison of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
config MACH_SMDK2413
bool "SMDK2413"
select CPU_S3C2412
+ select MACH_S3C2413
select MACH_SMDK
help
Say Y here if you are using an SMDK2413
/* exported for use in arch/arm/mach-s3c2410 */
+#ifdef CONFIG_PM
extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
extern int s3c_irqext_type(unsigned int irq, unsigned int type);
#include <asm/mach/irq.h>
#include <asm/hardware.h>
+#include <asm/proc-fns.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/arch/idle.h>
+
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-power.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
s3c_device_nand.name = "s3c2412-nand";
}
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+ unsigned long tmp;
+
+ /* ensure our idle mode is to go to idle */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ cpu_do_idle();
+}
+
/* s3c2412_map_io
*
* register the standard cpu IO areas, and any passed in from the
s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+ /* set our idle function */
+
+ s3c24xx_idle = s3c2412_idle;
+
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
.type __8032x_proc_info,#object
__8032x_proc_info:
.long 0x69052420
- .long 0xffffffe0
+ .long 0xfffff7e0
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
GET_THREAD_INFO(%ebp)
popl %eax
CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
CFI_ENDPROC
return 0;
}
+ /*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init
+e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
+{
+ u64 start = s;
+ u64 end = e;
+ int i;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ if (type && ei->type != type)
+ continue;
+ /* is the region (part) in overlap with the current region ?*/
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+ /* if the region is at the beginning of <start,end> we move
+ * start to the end of the region since it's ok until there
+ */
+ if (ei->addr <= start)
+ start = ei->addr + ei->size;
+ /* if start is now at or beyond end, we're done, full
+ * coverage */
+ if (start >= end)
+ return 1; /* we're done */
+ }
+ return 0;
+}
+
/*
* Find the highest page frame number we have available
*/
if (cpu_model == 14)
*cpu_type = "i386/core";
+ else if (cpu_model == 15)
+ *cpu_type = "i386/core_2";
else if (cpu_model > 0xd)
return 0;
else if (cpu_model == 9) {
pci_probe &= ~PCI_PROBE_MMCONF;
return NULL;
}
- /* override DMI blacklist */
- else if (!strcmp(str, "mmconf")) {
- pci_probe |= PCI_PROBE_MMCONF_FORCE;
- return NULL;
- }
#endif
else if (!strcmp(str, "noacpi")) {
acpi_noirq_set();
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
-#include <linux/dmi.h>
#include <asm/e820.h>
#include "pci.h"
}
}
-static int disable_mcfg(struct dmi_system_id *d)
-{
- printk("PCI: %s detected. Disabling MCFG.\n", d->ident);
- pci_probe &= ~PCI_PROBE_MMCONF;
- return 0;
-}
-
-static struct dmi_system_id __initdata dmi_bad_mcfg[] = {
- /* Has broken MCFG table that makes the system hang when used */
- {
- .callback = disable_mcfg,
- .ident = "Intel D3C5105 SDV",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Intel"),
- DMI_MATCH(DMI_BOARD_NAME, "D26928"),
- },
- },
- {}
-};
-
void __init pci_mmcfg_init(void)
{
- dmi_check_system(dmi_bad_mcfg);
-
- if ((pci_probe & (PCI_PROBE_MMCONF_FORCE|PCI_PROBE_MMCONF)) == 0)
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
(pci_mmcfg_config[0].base_address == 0))
return;
+ if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+ E820_RESERVED)) {
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
+ pci_mmcfg_config[0].base_address);
+ printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ return;
+ }
+
printk(KERN_INFO "PCI: Using MMCONFIG\n");
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
#define PCI_PROBE_CONF1 0x0002
#define PCI_PROBE_CONF2 0x0004
#define PCI_PROBE_MMCONF 0x0008
-#define PCI_PROBE_MMCONF_FORCE 0x0010
-#define PCI_PROBE_MASK 0x00ff
+#define PCI_PROBE_MASK 0x000f
#define PCI_NO_SORT 0x0100
#define PCI_BIOS_SORT 0x0200
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Thu Jun 22 15:28:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:20:32 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_PPC_SYSTEMSIM=y
+CONFIG_UDBG_RTAS_CONSOLE=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
#
# Cell Broadband Engine options
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_64K_PAGES is not set
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul 3 12:08:41 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:54 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC_STD_MMU_32=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_MPIC=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
#
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
#
# Ethernet (1000 Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug 8 09:12:29 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:55 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_U3_DART=y
-CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_PMAC64=y
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
#
# IPMI
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug 8 09:15:46 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:57 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
#
# Kernel options
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
#
# IPMI
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:54 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:24:55 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_U3_DART=y
-CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# CONFIG_USB_MDC800 is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_EZUSB=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
CONFIG_XMON_DEFAULT=y
# CONFIG_IRQSTACKS is not set
CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sat May 27 18:45:55 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:26:55 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_PPC_ISERIES is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_APUS is not set
-CONFIG_MPIC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
+# CONFIG_PPC_TODC is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_EV64360 is not set
CONFIG_TSI108_BRIDGE=y
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_MPIC_WEIRD=y
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
#
# PCCARD (PCMCIA/CardBus) support
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_SCSI_SATA_MV=y
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_TSI108_ETH=y
#
# Ethernet (10000 Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 30 17:53:25 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:05 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_MPC834x_SYS is not set
CONFIG_MPC834x_ITX=y
CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
#
# Kernel options
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:56 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:54 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
-# CONFIG_E500 is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_PPC_FPU=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# Platform support
#
CONFIG_MPC834x_SYS=y
+# CONFIG_MPC834x_ITX is not set
CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
#
# Kernel options
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
#
# PCCARD (PCMCIA/CardBus) support
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 27 23:37:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:23 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Platform support
#
CONFIG_MPC8540_ADS=y
+# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC8540=y
CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
#
# Kernel options
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_RAW_DRIVER is not set
#
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Sun Apr 2 11:23:42 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:49 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
CONFIG_MPC85xx_CDS=y
CONFIG_MPC8540=y
CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
#
# Kernel options
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
-CONFIG_PPC_I8259=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Fri Jun 16 10:47:09 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:15 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_PPC_STD_MMU_32=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
# CONFIG_SLAB is not set
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_SLOB=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_MPIC=y
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
#
# Platform Support
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul 3 14:20:49 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:23 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:32:14 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:11 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLK_DEV_IO_TRACE=y
#
# IO Schedulers
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_CELL is not set
+CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_NATIVE=y
+CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_XICS=y
CONFIG_U3_DART=y
-CONFIG_MPIC=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_BROKEN_U3=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_PMAC64=y
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
+CONFIG_SPUFS_MMAP=y
+CONFIG_CBE_RAS=y
#
# Kernel options
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=y
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
# Macintosh device drivers
#
CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=m
# CONFIG_MV643XX_ETH is not set
#
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
+CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# PCI devices
#
# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
#
# USB devices
#
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
#
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug 8 09:14:48 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:12 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_U3_DART is not set
-CONFIG_MPIC=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
#
# Kernel options
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
struct irq_desc *desc = irq_desc + irq;
if (desc->status & IRQ_INPROGRESS)
- desc->chip->end(irq);
+ desc->chip->eoi(irq);
if (!(desc->status & IRQ_DISABLED))
desc->chip->disable(irq);
.text
-#ifdef CONFIG_PPC64
-#define IN_SYNC twi 0,r5,0; isync
-#define EIEIO_32
-#define SYNC_64 sync
-#else /* CONFIG_PPC32 */
-#define IN_SYNC
-#define EIEIO_32 eieio
-#define SYNC_64
-#endif
/*
* Returns (address we are running at) - (address we were linked at)
* for use before the text and data are mapped to KERNELBASE.
* The *_ns versions don't do byte-swapping.
*/
_GLOBAL(_insb)
+ sync
cmpwi 0,r5,0
mtctr r5
subi r4,r4,1
eieio
stbu r5,1(r4)
bdnz 00b
- IN_SYNC
+ twi 0,r5,0
+ isync
blr
_GLOBAL(_outsb)
mtctr r5
subi r4,r4,1
blelr-
+ sync
00: lbzu r5,1(r4)
stb r5,0(r3)
- EIEIO_32
bdnz 00b
- SYNC_64
+ sync
blr
_GLOBAL(_insw)
+ sync
cmpwi 0,r5,0
mtctr r5
subi r4,r4,2
eieio
sthu r5,2(r4)
bdnz 00b
- IN_SYNC
+ twi 0,r5,0
+ isync
blr
_GLOBAL(_outsw)
mtctr r5
subi r4,r4,2
blelr-
+ sync
00: lhzu r5,2(r4)
- EIEIO_32
sthbrx r5,0,r3
bdnz 00b
- SYNC_64
+ sync
blr
_GLOBAL(_insl)
+ sync
cmpwi 0,r5,0
mtctr r5
subi r4,r4,4
eieio
stwu r5,4(r4)
bdnz 00b
- IN_SYNC
+ twi 0,r5,0
+ isync
blr
_GLOBAL(_outsl)
mtctr r5
subi r4,r4,4
blelr-
+ sync
00: lwzu r5,4(r4)
stwbrx r5,0,r3
- EIEIO_32
bdnz 00b
- SYNC_64
+ sync
blr
#ifdef CONFIG_PPC32
_GLOBAL(__ide_mm_insw)
#endif
_GLOBAL(_insw_ns)
+ sync
cmpwi 0,r5,0
mtctr r5
subi r4,r4,2
eieio
sthu r5,2(r4)
bdnz 00b
- IN_SYNC
+ twi 0,r5,0
+ isync
blr
#ifdef CONFIG_PPC32
mtctr r5
subi r4,r4,2
blelr-
+ sync
00: lhzu r5,2(r4)
sth r5,0(r3)
- EIEIO_32
bdnz 00b
- SYNC_64
+ sync
blr
#ifdef CONFIG_PPC32
_GLOBAL(__ide_mm_insl)
#endif
_GLOBAL(_insl_ns)
+ sync
cmpwi 0,r5,0
mtctr r5
subi r4,r4,4
eieio
stwu r5,4(r4)
bdnz 00b
- IN_SYNC
+ twi 0,r5,0
+ isync
blr
#ifdef CONFIG_PPC32
mtctr r5
subi r4,r4,4
blelr-
+ sync
00: lwzu r5,4(r4)
stw r5,0(r3)
- EIEIO_32
bdnz 00b
- SYNC_64
+ sync
blr
laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
laddr[1] = laddr[2] = 0;
- of_irq_map_raw(hosenode, &pin, laddr, &oirq);
+ of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
laddr[0], slot, pin, oirq.specifier[0]);
return oirq.specifier[0];
static void dart_flush(struct iommu_table *tbl)
{
+ mb();
if (dart_dirty) {
dart_tlb_invalidate_all();
dart_dirty = 0;
uaddr += DART_PAGE_SIZE;
}
+ /* make sure all updates have reached memory */
+ mb();
+ in_be32((unsigned __iomem *)dp);
+ mb();
+
if (dart_is_u4) {
rpn = index;
- mb(); /* make sure all updates have reached memory */
while (npages--)
dart_tlb_invalidate_one(rpn++);
} else {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Wed Jul 13 13:34:24 2005
+# Linux kernel version: 2.6.18-rc6
+# Wed Sep 6 15:09:32 2006
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-prep"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
+# CONFIG_ALTIVEC is not set
+# CONFIG_TAU is not set
# CONFIG_KEXEC is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_CPU_FREQ is not set
CONFIG_PPC601_SYNC_FIX=y
-CONFIG_PM=y
+# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
-CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_PPC_PREP=y
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
# CONFIG_MPC834x_SYS is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
+# CONFIG_EV64360 is not set
CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_HIGHMEM is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_PROC_DEVICETREE=y
CONFIG_PREP_RESIDUAL=y
CONFIG_PROC_PREPRESIDUAL=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
# CONFIG_PCI_DEBUG is not set
#
# PC-card bridges
#
CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
#
# Device Drivers
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
-CONFIG_MAC_FLOPPY=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
-CONFIG_SCSI_MAC53C94=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
#
# Macintosh device drivers
#
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_PMAC_BACKLIGHT=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
+# CONFIG_WINDFARM is not set
#
# Network device support
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
-CONFIG_BMAC=y
# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# Wireless 802.11b ISA/PCI cards support
#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Ftape, the floppy tape device driver
#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
-CONFIG_I2C_HYDRA=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_KEYWEST=m
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-CONFIG_FB_CONTROL=y
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
+# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=m
# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_XL_INIT=y
-CONFIG_FB_ATY_GX=y
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# Sound
#
CONFIG_SOUND=m
-CONFIG_DMASOUND_PMAC=m
-CONFIG_DMASOUND=m
#
# Advanced Linux Sound Architecture
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_PM=y
#
# Generic devices
# ISA devices
#
CONFIG_SND_CS4231_LIB=m
+# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
CONFIG_SND_CS4232=m
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
-CONFIG_SND_POWERMAC=m
+
+#
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
#
# USB devices
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
#
#
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
#
# Security options
{
int nlen, err;
- if (len < 0 || len > __NEW_UTS_LEN)
+ if (len < 0)
return -EINVAL;
down_read(&uts_sem);
nlen = strlen(system_utsname.domainname) + 1;
- if (nlen < len)
- len = nlen;
+ err = -EINVAL;
+ if (nlen > len)
+ goto out;
err = -EFAULT;
- if (!copy_to_user(name, system_utsname.domainname, len))
+ if (!copy_to_user(name, system_utsname.domainname, nlen))
err = 0;
+out:
up_read(&uts_sem);
return err;
}
{
int nlen, err;
- if (len < 0 || len > __NEW_UTS_LEN)
+ if (len < 0)
return -EINVAL;
down_read(&uts_sem);
nlen = strlen(system_utsname.domainname) + 1;
- if (nlen < len)
- len = nlen;
+ err = -EINVAL;
+ if (nlen > len)
+ goto out;
err = -EFAULT;
- if (!copy_to_user(name, system_utsname.domainname, len))
+ if (!copy_to_user(name, system_utsname.domainname, nlen))
err = 0;
+out:
up_read(&uts_sem);
return err;
}
return 0;
}
+/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
+{
+ int i;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ if (type && ei->type != type)
+ continue;
+ /* is the region (part) in overlap with the current region ?*/
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+
+ /* if the region is at the beginning of <start,end> we move
+ * start to the end of the region since it's ok until there
+ */
+ if (ei->addr <= start)
+ start = ei->addr + ei->size;
+ /* if start is now at or beyond end, we're done, full coverage */
+ if (start >= end)
+ return 1; /* we're done */
+ }
+ return 0;
+}
+
/*
* Find a free area in a specific range.
*/
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
-#include <linux/dmi.h>
#include <asm/e820.h>
#include "pci.h"
}
}
-static int disable_mcfg(struct dmi_system_id *d)
-{
- printk("PCI: %s detected. Disabling MCFG.\n", d->ident);
- pci_probe &= ~PCI_PROBE_MMCONF;
- return 0;
-}
-
-static struct dmi_system_id __initdata dmi_bad_mcfg[] = {
- /* Has broken MCFG table that makes the system hang when used */
- {
- .callback = disable_mcfg,
- .ident = "Intel D3C5105 SDV",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Intel"),
- DMI_MATCH(DMI_BOARD_NAME, "D26928"),
- },
- },
- {}
-};
-
void __init pci_mmcfg_init(void)
{
int i;
- dmi_check_system(dmi_bad_mcfg);
-
- if ((pci_probe & (PCI_PROBE_MMCONF|PCI_PROBE_MMCONF_FORCE)) == 0)
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
(pci_mmcfg_config[0].base_address == 0))
return;
+ if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+ E820_RESERVED)) {
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
+ pci_mmcfg_config[0].base_address);
+ printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ return;
+ }
+
/* RED-PEN i386 doesn't do _nocache right now */
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
#ifdef notdef
ATM_SKB(skb)->vcc = vcc;
#endif
+ spin_unlock(&he_dev->global_lock);
vcc->push(vcc, skb);
+ spin_lock(&he_dev->global_lock);
atomic_inc(&vcc->stats->rx);
TPDRQ_MASK(he_readl(he_dev, TPDRQ_B_H)));
if (new_tail == he_dev->tpdrq_head) {
+ int slot;
+
hprintk("tpdrq full (cid 0x%x)\n", cid);
/*
* FIXME
* after service_tbrq, service the backlog
* for now, we just drop the pdu
*/
+ for (slot = 0; slot < TPD_MAXIOV; ++slot) {
+ if (tpd->iovec[slot].addr)
+ pci_unmap_single(he_dev->pci_dev,
+ tpd->iovec[slot].addr,
+ tpd->iovec[slot].len & TPD_LEN_MASK,
+ PCI_DMA_TODEVICE);
+ }
if (tpd->skb) {
if (tpd->vcc->pop)
tpd->vcc->pop(tpd->vcc, tpd->skb);
#include <linux/completion.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 2.6.10)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,10)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.10");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i");
+ " SA6i P600 P800 P400 P400i E200 E200i E500");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3233},
{0,}
};
{0x3213103C, "Smart Array E200i", &SA5_access},
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3233103C, "Smart Array E500", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
do {
poll_mask = 0;
hvc_kicked = 0;
+ try_to_freeze();
wmb();
if (cpus_empty(cpus_in_xmon)) {
spin_lock(&hvc_structs_lock);
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_EVENTS;
- } else if (smi_info->msg_flags & OEM_DATA_AVAIL) {
- if (smi_info->oem_data_avail_handler)
- if (smi_info->oem_data_avail_handler(smi_info))
- goto retry;
+ } else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
+ smi_info->oem_data_avail_handler) {
+ if (smi_info->oem_data_avail_handler(smi_info))
+ goto retry;
} else {
smi_info->si_state = SI_NORMAL;
}
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
+ driver_unregister(&ipmi_driver);
printk("ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
if(m5229_revision <= 0x20)
tmpbyte = (tmpbyte & (~0x02)) | 0x01;
- else if (m5229_revision == 0xc7)
+ else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
tmpbyte |= 0x03;
else
tmpbyte |= 0x01;
MODULE_LICENSE("Dual BSD/GPL");
#define CMA_CM_RESPONSE_TIMEOUT 20
-#define CMA_MAX_CM_RETRIES 3
+#define CMA_MAX_CM_RETRIES 15
static void cma_add_one(struct ib_device *device);
static void cma_remove_one(struct ib_device *device);
/* Clear the busy flag so we try again */
clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+ mcast->query = NULL;
}
complete(&mcast->done);
spin_unlock_irqrestore(target->scsi_host->host_lock, flags);
}
-static void srp_reconnect_work(void *target_ptr)
-{
- struct srp_target_port *target = target_ptr;
-
- srp_reconnect_target(target);
-}
-
static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
{
struct srp_iu *iu;
{
struct srp_target_port *target = target_ptr;
struct ib_wc wc;
- unsigned long flags;
ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
while (ib_poll_cq(cq, 1, &wc) > 0) {
printk(KERN_ERR PFX "failed %s status %d\n",
wc.wr_id & SRP_OP_RECV ? "receive" : "send",
wc.status);
- spin_lock_irqsave(target->scsi_host->host_lock, flags);
- if (target->state == SRP_TARGET_LIVE)
- schedule_work(&target->work);
- spin_unlock_irqrestore(target->scsi_host->host_lock, flags);
break;
}
target->scsi_host = target_host;
target->srp_host = host;
- INIT_WORK(&target->work, srp_reconnect_work, target);
-
INIT_LIST_HEAD(&target->free_reqs);
INIT_LIST_HEAD(&target->req_queue);
for (i = 0; i < SRP_SQ_SIZE; ++i) {
static int __xipram xip_wait_for_operation(
struct map_info *map, struct flchip *chip,
- unsigned long adr, int *chip_op_time )
+ unsigned long adr, unsigned int chip_op_time )
{
struct cfi_private *cfi = map->fldrv_priv;
struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
flstate_t oldstate, newstate;
start = xip_currtime();
- usec = *chip_op_time * 8;
+ usec = chip_op_time * 8;
if (usec == 0)
usec = 500000;
done = 0;
#define XIP_INVAL_CACHED_RANGE(map, from, size) \
INVALIDATE_CACHED_RANGE(map, from, size)
-#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \
- xip_wait_for_operation(map, chip, cmd_adr, p_usec)
+#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec) \
+ xip_wait_for_operation(map, chip, cmd_adr, usec)
#else
static int inval_cache_and_wait_for_operation(
struct map_info *map, struct flchip *chip,
unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
- int *chip_op_time )
+ unsigned int chip_op_time)
{
struct cfi_private *cfi = map->fldrv_priv;
map_word status, status_OK = CMD(0x80);
- int z, chip_state = chip->state;
- unsigned long timeo;
+ int chip_state = chip->state;
+ unsigned int timeo, sleep_time;
spin_unlock(chip->mutex);
if (inval_len)
INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len);
- if (*chip_op_time)
- cfi_udelay(*chip_op_time);
spin_lock(chip->mutex);
- timeo = *chip_op_time * 8 * HZ / 1000000;
- if (timeo < HZ/2)
- timeo = HZ/2;
- timeo += jiffies;
+ /* set our timeout to 8 times the expected delay */
+ timeo = chip_op_time * 8;
+ if (!timeo)
+ timeo = 500000;
+ sleep_time = chip_op_time / 2;
- z = 0;
for (;;) {
- if (chip->state != chip_state) {
- /* Someone's suspended the operation: sleep */
- DECLARE_WAITQUEUE(wait, current);
-
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(&chip->wq, &wait);
- spin_unlock(chip->mutex);
- schedule();
- remove_wait_queue(&chip->wq, &wait);
- timeo = jiffies + (HZ / 2); /* FIXME */
- spin_lock(chip->mutex);
- continue;
- }
-
status = map_read(map, cmd_adr);
if (map_word_andequal(map, status, status_OK, status_OK))
break;
- /* OK Still waiting */
- if (time_after(jiffies, timeo)) {
+ if (!timeo) {
map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
return -ETIME;
}
- /* Latency issues. Drop the lock, wait a while and retry */
- z++;
+ /* OK Still waiting. Drop the lock, wait a while and retry. */
spin_unlock(chip->mutex);
- cfi_udelay(1);
+ if (sleep_time >= 1000000/HZ) {
+ /*
+ * Half of the normal delay still remaining
+ * can be performed with a sleeping delay instead
+ * of busy waiting.
+ */
+ msleep(sleep_time/1000);
+ timeo -= sleep_time;
+ sleep_time = 1000000/HZ;
+ } else {
+ udelay(1);
+ cond_resched();
+ timeo--;
+ }
spin_lock(chip->mutex);
- }
- if (!z) {
- if (!--(*chip_op_time))
- *chip_op_time = 1;
- } else if (z > 1)
- ++(*chip_op_time);
+ if (chip->state != chip_state) {
+ /* Someone's suspended the operation: sleep */
+ DECLARE_WAITQUEUE(wait, current);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&chip->wq, &wait);
+ spin_unlock(chip->mutex);
+ schedule();
+ remove_wait_queue(&chip->wq, &wait);
+ spin_lock(chip->mutex);
+ }
+ }
/* Done and happy. */
chip->state = FL_STATUS;
#endif
#define WAIT_TIMEOUT(map, chip, adr, udelay) \
- ({ int __udelay = (udelay); \
- INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); })
+ INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay);
static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
adr, map_bankwidth(map),
- &chip->word_write_time);
+ chip->word_write_time);
if (ret) {
xip_enable(map, chip, adr);
printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
adr, len,
- &chip->buffer_write_time);
+ chip->buffer_write_time);
if (ret) {
map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
adr, len,
- &chip->erase_time);
+ chip->erase_time);
if (ret) {
map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
#define MAX_WORD_RETRIES 3
#define MANUFACTURER_AMD 0x0001
+#define MANUFACTURER_ATMEL 0x001F
#define MANUFACTURER_SST 0x00BF
#define SST49LF004B 0x0060
#define SST49LF008A 0x005a
+#define AT49BV6416 0x00d6
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr);
#include "fwh_lock.h"
+static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+
static struct mtd_chip_driver cfi_amdstd_chipdrv = {
.probe = NULL, /* Not usable directly */
.destroy = cfi_amdstd_destroy,
}
}
+/* Atmel chips don't use the same PRI format as AMD chips */
+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+ struct cfi_pri_atmel atmel_pri;
+
+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
+
+ if (atmel_pri.Features & 0x02)
+ extp->EraseSuspend = 2;
+
+ if (atmel_pri.BottomBoot)
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
+}
+
static void fixup_use_secsi(struct mtd_info *mtd, void *param)
{
/* Setup for chips with a secsi area */
}
+/*
+ * Some Atmel chips (e.g. the AT49BV6416) power-up with all sectors
+ * locked by default.
+ */
+static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+{
+ mtd->lock = cfi_atmel_lock;
+ mtd->unlock = cfi_atmel_unlock;
+}
+
static struct cfi_fixup cfi_fixup_table[] = {
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
* we know that is the case.
*/
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
+ { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
{ 0, 0, NULL, NULL }
};
return 0;
}
+static int do_atmel_lock(struct map_info *map, struct flchip *chip,
+ unsigned long adr, int len, void *thunk)
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ int ret;
+
+ spin_lock(chip->mutex);
+ ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
+ if (ret)
+ goto out_unlock;
+ chip->state = FL_LOCKING;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
+ __func__, adr, len);
+
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ map_write(map, CMD(0x40), chip->start + adr);
+
+ chip->state = FL_READY;
+ put_chip(map, chip, adr + chip->start);
+ ret = 0;
+
+out_unlock:
+ spin_unlock(chip->mutex);
+ return ret;
+}
+
+static int do_atmel_unlock(struct map_info *map, struct flchip *chip,
+ unsigned long adr, int len, void *thunk)
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ int ret;
+
+ spin_lock(chip->mutex);
+ ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
+ if (ret)
+ goto out_unlock;
+ chip->state = FL_UNLOCKING;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
+ __func__, adr, len);
+
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ map_write(map, CMD(0x70), adr);
+
+ chip->state = FL_READY;
+ put_chip(map, chip, adr + chip->start);
+ ret = 0;
+
+out_unlock:
+ spin_unlock(chip->mutex);
+ return ret;
+}
+
+static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ return cfi_varsize_frob(mtd, do_atmel_lock, ofs, len, NULL);
+}
+
+static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL);
+}
+
static void cfi_amdstd_sync (struct mtd_info *mtd)
{
#define MX29LV040C 0x004F
#define MX29LV160T 0x22C4
#define MX29LV160B 0x2249
+#define MX29F040 0x00A4
#define MX29F016 0x00AD
#define MX29F002T 0x00B0
#define MX29F004T 0x0045
ERASEINFO(0x10000,31)
}
}, {
+ .mfr_id = MANUFACTURER_MACRONIX,
+ .dev_id = MX29F040,
+ .name = "Macronix MX29F040",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_512KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x10000,8),
+ }
+ }, {
.mfr_id = MANUFACTURER_MACRONIX,
.dev_id = MX29F016,
.name = "Macronix MX29F016",
#include <linux/mtd/mtd.h>
#include <linux/buffer_head.h>
#include <linux/mutex.h>
+#include <linux/mount.h>
#define VERSION "$Revision: 1.30 $"
}
return 0;
}
+
+
static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
/* Get a handle on the device */
bdev = open_bdev_excl(devname, O_RDWR, NULL);
+#ifndef MODULE
+ if (IS_ERR(bdev)) {
+
+ /* We might not have rootfs mounted at this point. Try
+ to resolve the device name by other means. */
+
+ dev_t dev = name_to_dev_t(devname);
+ if (dev != 0) {
+ bdev = open_by_devnum(dev, FMODE_WRITE | FMODE_READ);
+ }
+ }
+#endif
+
if (IS_ERR(bdev)) {
ERROR("error: cannot open device %s", devname);
goto devinit_err;
}
-static int parse_name(char **pname, const char *token, size_t limit)
-{
- size_t len;
- char *name;
-
- len = strlen(token) + 1;
- if (len > limit)
- return -ENOSPC;
-
- name = kmalloc(len, GFP_KERNEL);
- if (!name)
- return -ENOMEM;
-
- strcpy(name, token);
-
- *pname = name;
- return 0;
-}
-
-
static inline void kill_final_newline(char *str)
{
char *newline = strrchr(str, '\n');
return 0; \
} while (0)
-static int block2mtd_setup(const char *val, struct kernel_param *kp)
+#ifndef MODULE
+static int block2mtd_init_called = 0;
+static __initdata char block2mtd_paramline[80 + 12]; /* 80 for device, 12 for erase size */
+#endif
+
+
+static int block2mtd_setup2(const char *val)
{
- char buf[80+12]; /* 80 for device, 12 for erase size */
+ char buf[80 + 12]; /* 80 for device, 12 for erase size */
char *str = buf;
char *token[2];
char *name;
if (!token[0])
parse_err("no argument");
- ret = parse_name(&name, token[0], 80);
- if (ret == -ENOMEM)
- parse_err("out of memory");
- if (ret == -ENOSPC)
- parse_err("name too long");
- if (ret)
- return 0;
+ name = token[0];
+ if (strlen(name) + 1 > 80)
+ parse_err("device name too long");
if (token[1]) {
ret = parse_num(&erase_size, token[1]);
}
+static int block2mtd_setup(const char *val, struct kernel_param *kp)
+{
+#ifdef MODULE
+ return block2mtd_setup2(val);
+#else
+ /* If more parameters are later passed in via
+ /sys/module/block2mtd/parameters/block2mtd
+ and block2mtd_init() has already been called,
+ we can parse the argument now. */
+
+ if (block2mtd_init_called)
+ return block2mtd_setup2(val);
+
+ /* During early boot stage, we only save the parameters
+ here. We must parse them later: if the param passed
+ from kernel boot command line, block2mtd_setup() is
+ called so early that it is not possible to resolve
+ the device (even kmalloc() fails). Deter that work to
+ block2mtd_setup2(). */
+
+ strlcpy(block2mtd_paramline, val, sizeof(block2mtd_paramline));
+
+ return 0;
+#endif
+}
+
+
module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
static int __init block2mtd_init(void)
{
+ int ret = 0;
INFO("version " VERSION);
- return 0;
+
+#ifndef MODULE
+ if (strlen(block2mtd_paramline))
+ ret = block2mtd_setup2(block2mtd_paramline);
+ block2mtd_init_called = 1;
+#endif
+
+ return ret;
}
static struct flash_info __devinitdata m25p_data [] = {
/* REVISIT: fill in JEDEC ids, for parts that have them */
- { "m25p05", 0x05, 0x0000, 32 * 1024, 2 },
- { "m25p10", 0x10, 0x0000, 32 * 1024, 4 },
- { "m25p20", 0x11, 0x0000, 64 * 1024, 4 },
- { "m25p40", 0x12, 0x0000, 64 * 1024, 8 },
+ { "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
+ { "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
+ { "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
+ { "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
{ "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
- { "m25p16", 0x14, 0x0000, 64 * 1024, 32 },
- { "m25p32", 0x15, 0x0000, 64 * 1024, 64 },
+ { "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
+ { "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
{ "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
};
#include <asm/system.h>
#include <linux/pci.h>
-#ifndef CONFIG_PCI
-#error Enable PCI in your kernel config
-#endif
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/pmc551.h>
#include <linux/mtd/compatmac.h>
config MTD_PHYSMAP
tristate "CFI Flash device in physical memory map"
- depends on MTD_CFI
+ depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM
help
- This provides a 'mapping' driver which allows the CFI probe and
- command set driver code to communicate with flash chips which
- are mapped physically into the CPU's memory. You will need to
- configure the physical address and size of the flash chips on
- your particular board as well as the bus width, either statically
+ This provides a 'mapping' driver which allows the NOR Flash and
+ ROM driver code to communicate with chips which are mapped
+ physically into the CPU's memory. You will need to configure
+ the physical address and size of the flash chips on your
+ particular board as well as the bus width, either statically
with config options or at run-time.
config MTD_PHYSMAP_START
struct mtd_info *mtd = mfi->mtd;
switch (orig) {
- case 0:
- /* SEEK_SET */
+ case SEEK_SET:
break;
- case 1:
- /* SEEK_CUR */
+ case SEEK_CUR:
offset += file->f_pos;
break;
- case 2:
- /* SEEK_END */
+ case SEEK_END:
offset += mtd->size;
break;
default:
help
This enables support for accessing all type of NAND flash
devices. For further information see
- <http://www.linux-mtd.infradead.org/tech/nand.html>.
+ <http://www.linux-mtd.infradead.org/doc/nand.html>.
config MTD_NAND_VERIFY_WRITE
bool "Verify NAND page writes"
pos = steps * (eccsize + chunk);
steps = 0;
} else
- pos = eccsize + chunk;
+ pos = eccsize;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
for (i = 0; i < steps; i++) {
bytes = min_t(size_t, len, free->length);
boffs = free->offset;
}
- memcpy(chip->oob_poi + woffs, oob, bytes);
+ memcpy(chip->oob_poi + boffs, oob, bytes);
oob += bytes;
}
return oob;
}
/* Try to identify manufacturer */
- for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_id++) {
+ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
if (nand_manuf_ids[maf_idx].id == *maf_id)
break;
}
/*
* hardware specific access to control-lines
* ctrl:
- * NAND_CNE: bit 0 -> bit 0 & 4
+ * NAND_CNE: bit 0 -> ! bit 0 & 4
* NAND_CLE: bit 1 -> bit 1
* NAND_ALE: bit 2 -> bit 2
*
unsigned char bits = ctrl & 0x07;
bits |= (ctrl & 0x01) << 4;
- writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL);
+
+ bits ^= 0x11;
+
+ writeb((readb(FLASHCTL) & ~0x17) | bits, FLASHCTL);
}
if (cmd != NAND_CMD_NONE)
E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, TDT, 0);
E1000_WRITE_REG(hw, TDH, 0);
- adapter->tx_ring[0].tdh = E1000_TDH;
- adapter->tx_ring[0].tdt = E1000_TDT;
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
break;
}
E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, RDT, 0);
E1000_WRITE_REG(hw, RDH, 0);
- adapter->rx_ring[0].rdh = E1000_RDH;
- adapter->rx_ring[0].rdt = E1000_RDT;
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
break;
}
struct pkt_info pkt_info;
while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
+ dma_unmap_single(NULL, pkt_info.buf_ptr, RX_SKB_SIZE,
+ DMA_FROM_DEVICE);
mp->rx_desc_count--;
received_packets++;
break;
}
+ switch (rate) {
+ case ZD_OFDM_RATE_6M:
+ case ZD_OFDM_RATE_9M:
+ i += 3;
+ break;
+ case ZD_OFDM_RATE_12M:
+ case ZD_OFDM_RATE_18M:
+ i += 5;
+ break;
+ case ZD_OFDM_RATE_24M:
+ case ZD_OFDM_RATE_36M:
+ i += 9;
+ break;
+ case ZD_OFDM_RATE_48M:
+ case ZD_OFDM_RATE_54M:
+ i += 15;
+ break;
+ default:
+ return -EINVAL;
+ }
+
return i;
}
+static int ofdm_qual_percent(u8 status_quality, u8 rate, unsigned int size)
+{
+ int r;
+
+ r = ofdm_qual_db(status_quality, rate, size);
+ ZD_ASSERT(r >= 0);
+ if (r < 0)
+ r = 0;
+
+ r = (r * 100)/29;
+ return r <= 100 ? r : 100;
+}
+
static unsigned int log10times100(unsigned int x)
{
static const u8 log10[] = {
return r;
}
-static int rx_qual_db(const void *rx_frame, unsigned int size,
- const struct rx_status *status)
+static int cck_qual_percent(u8 status_quality)
{
- return (status->frame_status&ZD_RX_OFDM) ?
- ofdm_qual_db(status->signal_quality_ofdm,
- zd_ofdm_plcp_header_rate(rx_frame),
- size) :
- cck_snr_db(status->signal_quality_cck);
+ int r;
+
+ r = cck_snr_db(status_quality);
+ r = (100*r)/17;
+ return r <= 100 ? r : 100;
}
u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
const struct rx_status *status)
{
- int r = rx_qual_db(rx_frame, size, status);
- if (r < 0)
- r = 0;
- r = (r * 100) / 14;
- if (r > 100)
- r = 100;
- return r;
+ return (status->frame_status&ZD_RX_OFDM) ?
+ ofdm_qual_percent(status->signal_quality_ofdm,
+ zd_ofdm_plcp_header_rate(rx_frame),
+ size) :
+ cck_qual_percent(status->signal_quality_cck);
}
u8 zd_rx_strength_percent(u8 rssi)
{
- int r = (rssi*100) / 30;
+ int r = (rssi*100) / 41;
if (r > 100)
r = 100;
return (u8) r;
return -EINVAL;
}
-static void update_qual_rssi(struct zd_mac *mac, u8 qual_percent, u8 rssi)
+static void update_qual_rssi(struct zd_mac *mac,
+ const u8 *buffer, unsigned int length,
+ u8 qual_percent, u8 rssi_percent)
{
unsigned long flags;
+ struct ieee80211_hdr_3addr *hdr;
+ int i;
+
+ hdr = (struct ieee80211_hdr_3addr *)buffer;
+ if (length < offsetof(struct ieee80211_hdr_3addr, addr3))
+ return;
+ if (memcmp(hdr->addr2, zd_mac_to_ieee80211(mac)->bssid, ETH_ALEN) != 0)
+ return;
spin_lock_irqsave(&mac->lock, flags);
- mac->qual_average = (7 * mac->qual_average + qual_percent) / 8;
- mac->rssi_average = (7 * mac->rssi_average + rssi) / 8;
+ i = mac->stats_count % ZD_MAC_STATS_BUFFER_SIZE;
+ mac->qual_buffer[i] = qual_percent;
+ mac->rssi_buffer[i] = rssi_percent;
+ mac->stats_count++;
spin_unlock_irqrestore(&mac->lock, flags);
}
if (stats->rate)
stats->mask |= IEEE80211_STATMASK_RATE;
- update_qual_rssi(mac, stats->signal, stats->rssi);
return 0;
}
sizeof(struct rx_status);
buffer += ZD_PLCP_HEADER_SIZE;
+ update_qual_rssi(mac, buffer, length, stats.signal, stats.rssi);
+
r = filter_rx(ieee, buffer, length, &stats);
if (r <= 0)
return r;
{
struct zd_mac *mac = zd_netdev_mac(ndev);
struct iw_statistics *iw_stats = &mac->iw_stats;
+ unsigned int i, count, qual_total, rssi_total;
memset(iw_stats, 0, sizeof(struct iw_statistics));
/* We are not setting the status, because ieee->state is not updated
* at all and this driver doesn't track authentication state.
*/
spin_lock_irq(&mac->lock);
- iw_stats->qual.qual = mac->qual_average;
- iw_stats->qual.level = mac->rssi_average;
- iw_stats->qual.updated = IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED|
- IW_QUAL_NOISE_INVALID;
+ count = mac->stats_count < ZD_MAC_STATS_BUFFER_SIZE ?
+ mac->stats_count : ZD_MAC_STATS_BUFFER_SIZE;
+ qual_total = rssi_total = 0;
+ for (i = 0; i < count; i++) {
+ qual_total += mac->qual_buffer[i];
+ rssi_total += mac->rssi_buffer[i];
+ }
spin_unlock_irq(&mac->lock);
+ iw_stats->qual.updated = IW_QUAL_NOISE_INVALID;
+ if (count > 0) {
+ iw_stats->qual.qual = qual_total / count;
+ iw_stats->qual.level = rssi_total / count;
+ iw_stats->qual.updated |=
+ IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED;
+ } else {
+ iw_stats->qual.updated |=
+ IW_QUAL_QUAL_INVALID|IW_QUAL_LEVEL_INVALID;
+ }
/* TODO: update counter */
return iw_stats;
}
-/* zd_mac.c
+/* zd_mac.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define RX_LENGTH_INFO_TAG 0x697e
struct rx_status {
+ u8 signal_quality_cck;
/* rssi */
u8 signal_strength;
- u8 signal_quality_cck;
u8 signal_quality_ofdm;
u8 decryption_type;
u8 frame_status;
MAC_FIXED_CHANNEL = 0x01,
};
+#define ZD_MAC_STATS_BUFFER_SIZE 16
+
struct zd_mac {
struct net_device *netdev;
struct zd_chip chip;
spinlock_t lock;
/* Unlocked reading possible */
struct iw_statistics iw_stats;
- u8 qual_average;
- u8 rssi_average;
+ unsigned int stats_count;
+ u8 qual_buffer[ZD_MAC_STATS_BUFFER_SIZE];
+ u8 rssi_buffer[ZD_MAC_STATS_BUFFER_SIZE];
u8 regdomain;
u8 default_regdomain;
u8 requested_channel;
If CONFIG_QETH is switched on, this option will include IEEE
802.1q VLAN support in the qeth device driver.
-config QETH_PERF_STATS
- bool "Performance statistics in /proc"
- depends on QETH
- help
- When switched on, this option will add a file in the proc-fs
- (/proc/qeth_perf_stats) containing performance statistics. It
- may slightly impact performance, so this is only recommended for
- internal tuning of the device driver.
-
config CCWGROUP
tristate
default (LCS || CTC || QETH)
obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o
obj-$(CONFIG_LCS) += lcs.o cu3088.o
obj-$(CONFIG_CLAW) += claw.o cu3088.o
-obj-$(CONFIG_MPC) += ctcmpc.o fsm.o cu3088.o
qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o
qeth-$(CONFIG_PROC_FS) += qeth_proc.o
obj-$(CONFIG_QETH) += qeth.o
kfree(ch);
return 0;
}
+
+ spin_lock_init(&ch->collect_lock);
+
fsm_settimer(ch->fsm, &ch->timer);
skb_queue_head_init(&ch->io_queue);
skb_queue_head_init(&ch->collect_queue);
#else
-#define iucv_debug(lvl, fmt, args...)
-#define iucv_dumpit(title, buf, len)
+#define iucv_debug(lvl, fmt, args...) do { } while (0)
+#define iucv_dumpit(title, buf, len) do { } while (0)
#endif
int index, rc;
LCS_DBF_TEXT(5, trace, "rdybuff");
- if (buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED);
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_READY;
index = buffer - channel->iob;
int index, prev, next;
LCS_DBF_TEXT(5, trace, "prcsbuff");
- if (buffer->state != BUF_STATE_READY)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_READY);
buffer->state = BUF_STATE_PROCESSED;
index = buffer - channel->iob;
prev = (index - 1) & (LCS_NUM_BUFFS - 1);
unsigned long flags;
LCS_DBF_TEXT(5, trace, "relbuff");
- if (buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED);
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_EMPTY;
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
/**
* Linked list of all connection structs.
*/
-static struct iucv_connection *iucv_connections;
+struct iucv_connection_struct {
+ struct iucv_connection *iucv_connections;
+ rwlock_t iucv_rwlock;
+};
+
+static struct iucv_connection_struct iucv_conns;
/**
* Representation of event-data for the
struct net_device *ndev = priv->conn->netdev;
char *p;
char *tmp;
- char username[10];
+ char username[9];
int i;
+ struct iucv_connection **clist = &iucv_conns.iucv_connections;
+ unsigned long flags;
IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
if (count>9) {
tmp = strsep((char **) &buf, "\n");
for (i=0, p=tmp; i<8 && *p; i++, p++) {
if (isalnum(*p) || (*p == '$'))
- username[i]= *p;
+ username[i]= toupper(*p);
else if (*p == '\n') {
/* trailing lf, grr */
break;
return -EINVAL;
}
}
- while (i<9)
+ while (i<8)
username[i++] = ' ';
- username[9] = '\0';
+ username[8] = '\0';
- if (memcmp(username, priv->conn->userid, 8)) {
+ if (memcmp(username, priv->conn->userid, 9)) {
/* username changed */
if (ndev->flags & (IFF_UP | IFF_RUNNING)) {
PRINT_WARN(
return -EBUSY;
}
}
+ read_lock_irqsave(&iucv_conns.iucv_rwlock, flags);
+ while (*clist) {
+ if (!strncmp(username, (*clist)->userid, 9) ||
+ ((*clist)->netdev != ndev))
+ break;
+ clist = &((*clist)->next);
+ }
+ read_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
+ if (*clist) {
+ PRINT_WARN("netiucv: Connection to %s already exists\n",
+ username);
+ return -EEXIST;
+ }
memcpy(priv->conn->userid, username, 9);
return count;
static struct iucv_connection *
netiucv_new_connection(struct net_device *dev, char *username)
{
- struct iucv_connection **clist = &iucv_connections;
+ unsigned long flags;
+ struct iucv_connection **clist = &iucv_conns.iucv_connections;
struct iucv_connection *conn =
kzalloc(sizeof(struct iucv_connection), GFP_KERNEL);
if (conn) {
skb_queue_head_init(&conn->collect_queue);
skb_queue_head_init(&conn->commit_queue);
+ spin_lock_init(&conn->collect_lock);
conn->max_buffsize = NETIUCV_BUFSIZE_DEFAULT;
conn->netdev = dev;
fsm_newstate(conn->fsm, CONN_STATE_STOPPED);
}
+ write_lock_irqsave(&iucv_conns.iucv_rwlock, flags);
conn->next = *clist;
*clist = conn;
+ write_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
}
return conn;
}
static void
netiucv_remove_connection(struct iucv_connection *conn)
{
- struct iucv_connection **clist = &iucv_connections;
+ struct iucv_connection **clist = &iucv_conns.iucv_connections;
+ unsigned long flags;
IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
if (conn == NULL)
return;
+ write_lock_irqsave(&iucv_conns.iucv_rwlock, flags);
while (*clist) {
if (*clist == conn) {
*clist = conn->next;
+ write_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
if (conn->handle) {
iucv_unregister_program(conn->handle);
conn->handle = NULL;
}
clist = &((*clist)->next);
}
+ write_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
}
/**
conn_write(struct device_driver *drv, const char *buf, size_t count)
{
char *p;
- char username[10];
+ char username[9];
int i, ret;
struct net_device *dev;
+ struct iucv_connection **clist = &iucv_conns.iucv_connections;
+ unsigned long flags;
IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
if (count>9) {
for (i=0, p=(char *)buf; i<8 && *p; i++, p++) {
if (isalnum(*p) || (*p == '$'))
- username[i]= *p;
+ username[i]= toupper(*p);
else if (*p == '\n') {
/* trailing lf, grr */
break;
return -EINVAL;
}
}
- while (i<9)
+ while (i<8)
username[i++] = ' ';
- username[9] = '\0';
+ username[8] = '\0';
+
+ read_lock_irqsave(&iucv_conns.iucv_rwlock, flags);
+ while (*clist) {
+ if (!strncmp(username, (*clist)->userid, 9))
+ break;
+ clist = &((*clist)->next);
+ }
+ read_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
+ if (*clist) {
+ PRINT_WARN("netiucv: Connection to %s already exists\n",
+ username);
+ return -EEXIST;
+ }
dev = netiucv_init_netdevice(username);
if (!dev) {
PRINT_WARN(
static ssize_t
remove_write (struct device_driver *drv, const char *buf, size_t count)
{
- struct iucv_connection **clist = &iucv_connections;
+ struct iucv_connection **clist = &iucv_conns.iucv_connections;
+ unsigned long flags;
struct net_device *ndev;
struct netiucv_priv *priv;
struct device *dev;
IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
if (count >= IFNAMSIZ)
- count = IFNAMSIZ-1;
+ count = IFNAMSIZ - 1;;
for (i=0, p=(char *)buf; i<count && *p; i++, p++) {
if ((*p == '\n') || (*p == ' ')) {
}
name[i] = '\0';
+ read_lock_irqsave(&iucv_conns.iucv_rwlock, flags);
while (*clist) {
ndev = (*clist)->netdev;
priv = (struct netiucv_priv*)ndev->priv;
clist = &((*clist)->next);
continue;
}
+ read_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
if (ndev->flags & (IFF_UP | IFF_RUNNING)) {
PRINT_WARN(
"netiucv: net device %s active with peer %s\n",
netiucv_unregister_device(dev);
return count;
}
+ read_unlock_irqrestore(&iucv_conns.iucv_rwlock, flags);
PRINT_WARN("netiucv: net device %s unknown\n", name);
IUCV_DBF_TEXT(data, 2, "remove_write: unknown device\n");
return -EINVAL;
netiucv_exit(void)
{
IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
- while (iucv_connections) {
- struct net_device *ndev = iucv_connections->netdev;
+ while (iucv_conns.iucv_connections) {
+ struct net_device *ndev = iucv_conns.iucv_connections->netdev;
struct netiucv_priv *priv = (struct netiucv_priv*)ndev->priv;
struct device *dev = priv->dev;
if (!ret) {
ret = driver_create_file(&netiucv_driver, &driver_attr_remove);
netiucv_banner();
+ rwlock_init(&iucv_conns.iucv_rwlock);
} else {
PRINT_ERR("NETIUCV: failed to add driver attribute.\n");
IUCV_DBF_TEXT_(setup, 2, "ret %d from driver_create_file\n", ret);
/**
* card stuff
*/
-#ifdef CONFIG_QETH_PERF_STATS
struct qeth_perf_stats {
unsigned int bufs_rec;
unsigned int bufs_sent;
unsigned int large_send_cnt;
unsigned int sg_skbs_sent;
unsigned int sg_frags_sent;
+ /* initial values when measuring starts */
+ unsigned long initial_rx_packets;
+ unsigned long initial_tx_packets;
};
-#endif /* CONFIG_QETH_PERF_STATS */
/* Routing stuff */
struct qeth_routing_info {
QETH_QDIO_UNINITIALIZED,
QETH_QDIO_ALLOCATED,
QETH_QDIO_ESTABLISHED,
+ QETH_QDIO_CLEANING
};
struct qeth_buffer_pool_entry {
} __attribute__ ((aligned(256)));
struct qeth_qdio_info {
- volatile enum qeth_qdio_info_states state;
+ atomic_t state;
/* input */
struct qeth_qdio_q *in_q;
struct qeth_qdio_buffer_pool in_buf_pool;
int fake_ll;
int layer2;
enum qeth_large_send_types large_send;
+ int performance_stats;
};
/*
struct list_head cmd_waiter_list;
/* QDIO buffer handling */
struct qeth_qdio_info qdio;
-#ifdef CONFIG_QETH_PERF_STATS
struct qeth_perf_stats perf_stats;
-#endif /* CONFIG_QETH_PERF_STATS */
int use_hard_stop;
int (*orig_hard_header)(struct sk_buff *,struct net_device *,
unsigned short,void *,void *,unsigned);
}
}
-static inline int
-qeth_realloc_headroom(struct qeth_card *card, struct sk_buff **skb, int size)
+static inline struct sk_buff *
+qeth_realloc_headroom(struct qeth_card *card, struct sk_buff *skb, int size)
{
- struct sk_buff *new_skb = NULL;
-
- if (skb_headroom(*skb) < size){
- new_skb = skb_realloc_headroom(*skb, size);
- if (!new_skb) {
- PRINT_ERR("qeth_prepare_skb: could "
- "not realloc headroom for qeth_hdr "
- "on interface %s", QETH_CARD_IFNAME(card));
- return -ENOMEM;
- }
- kfree_skb(*skb);
- *skb = new_skb;
- }
- return 0;
+ struct sk_buff *new_skb = skb;
+
+ if (skb_headroom(skb) >= size)
+ return skb;
+ new_skb = skb_realloc_headroom(skb, size);
+ if (!new_skb)
+ PRINT_ERR("Could not realloc headroom for qeth_hdr "
+ "on interface %s", QETH_CARD_IFNAME(card));
+ return new_skb;
}
static inline struct sk_buff *
if (!skb_cloned(skb))
return skb;
nskb = skb_copy(skb, pri);
- kfree_skb(skb); /* free our shared copy */
return nskb;
}
static inline void *
-qeth_push_skb(struct qeth_card *card, struct sk_buff **skb, int size)
+qeth_push_skb(struct qeth_card *card, struct sk_buff *skb, int size)
{
void *hdr;
- hdr = (void *) skb_push(*skb, size);
+ hdr = (void *) skb_push(skb, size);
/*
* sanity check, the Linux memory allocation scheme should
* never present us cases like this one (the qdio header size plus
if ((((unsigned long) hdr) & (~(PAGE_SIZE - 1))) !=
(((unsigned long) hdr + size +
QETH_IP_HEADER_SIZE) & (~(PAGE_SIZE - 1)))) {
- PRINT_ERR("qeth_prepare_skb: misaligned "
- "packet on interface %s. Discarded.",
+ PRINT_ERR("Misaligned packet on interface %s. Discarded.",
QETH_CARD_IFNAME(card));
return NULL;
}
}
}
-#ifdef CONFIG_QETH_PERF_STATS
static inline int
qeth_get_micros(void)
{
return (int) (get_clock() >> 12);
}
-#endif
static inline int
qeth_get_qdio_q_format(struct qeth_card *card)
{
int count = 0, rc = 0;
int in[4];
+ char c;
- rc = sscanf(buf, "%d.%d.%d.%d%n",
- &in[0], &in[1], &in[2], &in[3], &count);
- if (rc != 4 || count<=0)
+ rc = sscanf(buf, "%u.%u.%u.%u%c",
+ &in[0], &in[1], &in[2], &in[3], &c);
+ if (rc != 4 && (rc != 5 || c != '\n'))
return -EINVAL;
for (count = 0; count < 4; count++) {
if (in[count] > 255)
static inline int
qeth_string_to_ipaddr6(const char *buf, __u8 *addr)
{
- char *end, *start;
+ const char *end, *end_tmp, *start;
__u16 *in;
char num[5];
int num2, cnt, out, found, save_cnt;
unsigned short in_tmp[8] = {0, };
cnt = out = found = save_cnt = num2 = 0;
- end = start = (char *) buf;
+ end = start = buf;
in = (__u16 *) addr;
memset(in, 0, 16);
- while (end) {
- end = strchr(end,':');
+ while (*end) {
+ end = strchr(start,':');
if (end == NULL) {
- end = (char *)buf + (strlen(buf));
- out = 1;
+ end = buf + strlen(buf);
+ if ((end_tmp = strchr(start, '\n')) != NULL)
+ end = end_tmp;
+ out = 1;
}
if ((end - start)) {
memset(num, 0, 5);
+ if ((end - start) > 4)
+ return -EINVAL;
memcpy(num, start, end - start);
if (!qeth_isxdigit(num))
return -EINVAL;
}
start = ++end;
}
+ if (cnt + save_cnt > 8)
+ return -EINVAL;
cnt = 7;
while (save_cnt)
in[cnt--] = in_tmp[--save_cnt];
flush_cnt++;
}
} else {
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.skbs_sent_pack++;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.skbs_sent_pack++;
QETH_DBF_TEXT(trace, 6, "fillbfpa");
if (buf->next_element_to_fill >=
QETH_MAX_BUFFER_ELEMENTS(queue->card)) {
card->options.layer2 = 1;
else
card->options.layer2 = 0;
+ card->options.performance_stats = 1;
}
/**
"IP address reset.\n",
QETH_CARD_IFNAME(card),
card->info.chpid);
+ netif_carrier_on(card->dev);
qeth_schedule_recovery(card);
return NULL;
case IPA_CMD_MODCCID:
qeth_rebuild_skb_fake_ll_eth(card, skb, hdr);
}
-static inline void
-qeth_rebuild_skb_vlan(struct qeth_card *card, struct sk_buff *skb,
- struct qeth_hdr *hdr)
-{
-#ifdef CONFIG_QETH_VLAN
- u16 *vlan_tag;
-
- if (hdr->hdr.l3.ext_flags &
- (QETH_HDR_EXT_VLAN_FRAME | QETH_HDR_EXT_INCLUDE_VLAN_TAG)) {
- vlan_tag = (u16 *) skb_push(skb, VLAN_HLEN);
- *vlan_tag = (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_VLAN_FRAME)?
- hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]);
- *(vlan_tag + 1) = skb->protocol;
- skb->protocol = __constant_htons(ETH_P_8021Q);
- }
-#endif /* CONFIG_QETH_VLAN */
-}
-
static inline __u16
qeth_layer2_rebuild_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
return vlan_id;
}
-static inline void
+static inline __u16
qeth_rebuild_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
+ unsigned short vlan_id = 0;
#ifdef CONFIG_QETH_IPV6
if (hdr->hdr.l3.flags & QETH_HDR_PASSTHRU) {
skb->pkt_type = PACKET_HOST;
skb->protocol = qeth_type_trans(skb, card->dev);
- return;
+ return 0;
}
#endif /* CONFIG_QETH_IPV6 */
skb->protocol = htons((hdr->hdr.l3.flags & QETH_HDR_IPV6)? ETH_P_IPV6 :
default:
skb->pkt_type = PACKET_HOST;
}
- qeth_rebuild_skb_vlan(card, skb, hdr);
+
+ if (hdr->hdr.l3.ext_flags &
+ (QETH_HDR_EXT_VLAN_FRAME | QETH_HDR_EXT_INCLUDE_VLAN_TAG)) {
+ vlan_id = (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_VLAN_FRAME)?
+ hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]);
+ }
+
if (card->options.fake_ll)
qeth_rebuild_skb_fake_ll(card, skb, hdr);
else
else
skb->ip_summed = SW_CHECKSUMMING;
}
+ return vlan_id;
}
static inline void
int offset;
int rxrc;
__u16 vlan_tag = 0;
+ __u16 *vlan_addr;
/* get first element of current buffer */
element = (struct qdio_buffer_element *)&buf->buffer->element[0];
offset = 0;
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.bufs_rec++;
-#endif
+ if (card->options.performance_stats)
+ card->perf_stats.bufs_rec++;
while((skb = qeth_get_next_skb(card, buf->buffer, &element,
&offset, &hdr))) {
skb->dev = card->dev;
if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
- qeth_rebuild_skb(card, skb, hdr);
+ vlan_tag = qeth_rebuild_skb(card, skb, hdr);
else { /*in case of OSN*/
skb_push(skb, sizeof(struct qeth_hdr));
memcpy(skb->data, hdr, sizeof(struct qeth_hdr));
dev_kfree_skb_any(skb);
continue;
}
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ rxrc = card->osn_info.data_cb(skb);
+ else
#ifdef CONFIG_QETH_VLAN
if (vlan_tag)
- vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag);
+ if (card->vlangrp)
+ vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag);
+ else {
+ dev_kfree_skb_any(skb);
+ continue;
+ }
else
#endif
- if (card->info.type == QETH_CARD_TYPE_OSN)
- rxrc = card->osn_info.data_cb(skb);
- else
rxrc = netif_rx(skb);
card->dev->last_rx = jiffies;
card->stats.rx_packets++;
{
struct qeth_buffer_pool_entry *pool_entry;
int i;
-
+
pool_entry = qeth_get_buffer_pool_entry(card);
/*
* since the buffer is accessed only from the input_tasklet
* 'index') un-requeued -> this buffer is the first buffer that
* will be requeued the next time
*/
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.inbound_do_qdio_cnt++;
- card->perf_stats.inbound_do_qdio_start_time = qeth_get_micros();
-#endif
+ if (card->options.performance_stats) {
+ card->perf_stats.inbound_do_qdio_cnt++;
+ card->perf_stats.inbound_do_qdio_start_time =
+ qeth_get_micros();
+ }
rc = do_QDIO(CARD_DDEV(card),
QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT,
0, queue->next_buf_to_init, count, NULL);
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.inbound_do_qdio_time += qeth_get_micros() -
- card->perf_stats.inbound_do_qdio_start_time;
-#endif
+ if (card->options.performance_stats)
+ card->perf_stats.inbound_do_qdio_time +=
+ qeth_get_micros() -
+ card->perf_stats.inbound_do_qdio_start_time;
if (rc){
PRINT_WARN("qeth_queue_input_buffer's do_QDIO "
"return %i (device %s).\n",
QETH_DBF_TEXT(trace, 6, "qdinput");
card = (struct qeth_card *) card_ptr;
net_dev = card->dev;
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.inbound_cnt++;
- card->perf_stats.inbound_start_time = qeth_get_micros();
-#endif
+ if (card->options.performance_stats) {
+ card->perf_stats.inbound_cnt++;
+ card->perf_stats.inbound_start_time = qeth_get_micros();
+ }
if (status & QDIO_STATUS_LOOK_FOR_ERROR) {
if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION){
QETH_DBF_TEXT(trace, 1,"qdinchk");
qeth_put_buffer_pool_entry(card, buffer->pool_entry);
qeth_queue_input_buffer(card, index);
}
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.inbound_time += qeth_get_micros() -
- card->perf_stats.inbound_start_time;
-#endif
+ if (card->options.performance_stats)
+ card->perf_stats.inbound_time += qeth_get_micros() -
+ card->perf_stats.inbound_start_time;
}
static inline int
}
queue->card->dev->trans_start = jiffies;
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.outbound_do_qdio_cnt++;
- queue->card->perf_stats.outbound_do_qdio_start_time = qeth_get_micros();
-#endif
+ if (queue->card->options.performance_stats) {
+ queue->card->perf_stats.outbound_do_qdio_cnt++;
+ queue->card->perf_stats.outbound_do_qdio_start_time =
+ qeth_get_micros();
+ }
if (under_int)
rc = do_QDIO(CARD_DDEV(queue->card),
QDIO_FLAG_SYNC_OUTPUT | QDIO_FLAG_UNDER_INTERRUPT,
else
rc = do_QDIO(CARD_DDEV(queue->card), QDIO_FLAG_SYNC_OUTPUT,
queue->queue_no, index, count, NULL);
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() -
- queue->card->perf_stats.outbound_do_qdio_start_time;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.outbound_do_qdio_time +=
+ qeth_get_micros() -
+ queue->card->perf_stats.outbound_do_qdio_start_time;
if (rc){
QETH_DBF_TEXT(trace, 2, "flushbuf");
QETH_DBF_TEXT_(trace, 2, " err%d", rc);
return;
}
atomic_add(count, &queue->used_buffers);
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.bufs_sent += count;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.bufs_sent += count;
}
/*
>= QETH_HIGH_WATERMARK_PACK){
/* switch non-PACKING -> PACKING */
QETH_DBF_TEXT(trace, 6, "np->pack");
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.sc_dp_p++;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.sc_dp_p++;
queue->do_pack = 1;
}
}
<= QETH_LOW_WATERMARK_PACK) {
/* switch PACKING -> non-PACKING */
QETH_DBF_TEXT(trace, 6, "pack->np");
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.sc_p_dp++;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.sc_p_dp++;
queue->do_pack = 0;
/* flush packing buffers */
buffer = &queue->bufs[queue->next_buf_to_fill];
queue->next_buf_to_fill =
(queue->next_buf_to_fill + 1) %
QDIO_MAX_BUFFERS_PER_Q;
- }
+ }
}
}
return flush_count;
!atomic_read(&queue->set_pci_flags_count))
flush_cnt +=
qeth_flush_buffers_on_no_pci(queue);
-#ifdef CONFIG_QETH_PERF_STATS
- if (q_was_packing)
+ if (queue->card->options.performance_stats &&
+ q_was_packing)
queue->card->perf_stats.bufs_sent_pack +=
flush_cnt;
-#endif
if (flush_cnt)
qeth_flush_buffers(queue, 1, index, flush_cnt);
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
return;
}
}
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.outbound_handler_cnt++;
- card->perf_stats.outbound_handler_start_time = qeth_get_micros();
-#endif
+ if (card->options.performance_stats) {
+ card->perf_stats.outbound_handler_cnt++;
+ card->perf_stats.outbound_handler_start_time =
+ qeth_get_micros();
+ }
for(i = first_element; i < (first_element + count); ++i){
buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
/*we only handle the KICK_IT error by doing a recovery */
qeth_check_outbound_queue(queue);
netif_wake_queue(queue->card->dev);
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.outbound_handler_time += qeth_get_micros() -
- card->perf_stats.outbound_handler_start_time;
-#endif
+ if (card->options.performance_stats)
+ card->perf_stats.outbound_handler_time += qeth_get_micros() -
+ card->perf_stats.outbound_handler_start_time;
}
static void
QETH_DBF_TEXT(setup, 2, "allcqdbf");
- if (card->qdio.state == QETH_QDIO_ALLOCATED)
+ if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED,
+ QETH_QDIO_ALLOCATED) != QETH_QDIO_UNINITIALIZED)
return 0;
card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q),
GFP_KERNEL|GFP_DMA);
if (!card->qdio.in_q)
- return - ENOMEM;
+ goto out_nomem;
QETH_DBF_TEXT(setup, 2, "inq");
QETH_DBF_HEX(setup, 2, &card->qdio.in_q, sizeof(void *));
memset(card->qdio.in_q, 0, sizeof(struct qeth_qdio_q));
card->qdio.in_q->bufs[i].buffer =
&card->qdio.in_q->qdio_bufs[i];
/* inbound buffer pool */
- if (qeth_alloc_buffer_pool(card)){
- kfree(card->qdio.in_q);
- return -ENOMEM;
- }
+ if (qeth_alloc_buffer_pool(card))
+ goto out_freeinq;
/* outbound */
card->qdio.out_qs =
kmalloc(card->qdio.no_out_queues *
sizeof(struct qeth_qdio_out_q *), GFP_KERNEL);
- if (!card->qdio.out_qs){
- qeth_free_buffer_pool(card);
- return -ENOMEM;
- }
- for (i = 0; i < card->qdio.no_out_queues; ++i){
+ if (!card->qdio.out_qs)
+ goto out_freepool;
+ for (i = 0; i < card->qdio.no_out_queues; ++i) {
card->qdio.out_qs[i] = kmalloc(sizeof(struct qeth_qdio_out_q),
GFP_KERNEL|GFP_DMA);
- if (!card->qdio.out_qs[i]){
- while (i > 0)
- kfree(card->qdio.out_qs[--i]);
- kfree(card->qdio.out_qs);
- return -ENOMEM;
- }
+ if (!card->qdio.out_qs[i])
+ goto out_freeoutq;
QETH_DBF_TEXT_(setup, 2, "outq %i", i);
QETH_DBF_HEX(setup, 2, &card->qdio.out_qs[i], sizeof(void *));
memset(card->qdio.out_qs[i], 0, sizeof(struct qeth_qdio_out_q));
INIT_LIST_HEAD(&card->qdio.out_qs[i]->bufs[j].ctx_list);
}
}
- card->qdio.state = QETH_QDIO_ALLOCATED;
return 0;
+
+out_freeoutq:
+ while (i > 0)
+ kfree(card->qdio.out_qs[--i]);
+ kfree(card->qdio.out_qs);
+out_freepool:
+ qeth_free_buffer_pool(card);
+out_freeinq:
+ kfree(card->qdio.in_q);
+out_nomem:
+ atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED);
+ return -ENOMEM;
}
static void
int i, j;
QETH_DBF_TEXT(trace, 2, "freeqdbf");
- if (card->qdio.state == QETH_QDIO_UNINITIALIZED)
+ if (atomic_swap(&card->qdio.state, QETH_QDIO_UNINITIALIZED) ==
+ QETH_QDIO_UNINITIALIZED)
return;
kfree(card->qdio.in_q);
/* inbound buffer pool */
kfree(card->qdio.out_qs[i]);
}
kfree(card->qdio.out_qs);
- card->qdio.state = QETH_QDIO_UNINITIALIZED;
}
static void
qeth_init_qdio_info(struct qeth_card *card)
{
QETH_DBF_TEXT(setup, 4, "intqdinf");
- card->qdio.state = QETH_QDIO_UNINITIALIZED;
+ atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED);
/* inbound */
card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT;
card->qdio.init_pool.buf_count = QETH_IN_BUF_COUNT_DEFAULT;
struct qdio_buffer **in_sbal_ptrs;
struct qdio_buffer **out_sbal_ptrs;
int i, j, k;
- int rc;
+ int rc = 0;
QETH_DBF_TEXT(setup, 2, "qdioest");
init_data.input_sbal_addr_array = (void **) in_sbal_ptrs;
init_data.output_sbal_addr_array = (void **) out_sbal_ptrs;
- if (!(rc = qdio_initialize(&init_data)))
- card->qdio.state = QETH_QDIO_ESTABLISHED;
+ if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED,
+ QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED)
+ if ((rc = qdio_initialize(&init_data)))
+ atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED);
kfree(out_sbal_ptrs);
kfree(in_sbal_ptrs);
int rc = 0;
QETH_DBF_TEXT(trace,3,"qdioclr");
- if (card->qdio.state == QETH_QDIO_ESTABLISHED){
+ switch (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ESTABLISHED,
+ QETH_QDIO_CLEANING)) {
+ case QETH_QDIO_ESTABLISHED:
if ((rc = qdio_cleanup(CARD_DDEV(card),
- (card->info.type == QETH_CARD_TYPE_IQD) ?
- QDIO_FLAG_CLEANUP_USING_HALT :
- QDIO_FLAG_CLEANUP_USING_CLEAR)))
+ (card->info.type == QETH_CARD_TYPE_IQD) ?
+ QDIO_FLAG_CLEANUP_USING_HALT :
+ QDIO_FLAG_CLEANUP_USING_CLEAR)))
QETH_DBF_TEXT_(trace, 3, "1err%d", rc);
- card->qdio.state = QETH_QDIO_ALLOCATED;
+ atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED);
+ break;
+ case QETH_QDIO_CLEANING:
+ return rc;
+ default:
+ break;
}
if ((rc = qeth_clear_halt_card(card, use_halt)))
QETH_DBF_TEXT_(trace, 3, "2err%d", rc);
/* return OK; otherwise ksoftirqd goes to 100% */
return NETDEV_TX_OK;
}
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.outbound_cnt++;
- card->perf_stats.outbound_start_time = qeth_get_micros();
-#endif
+ if (card->options.performance_stats) {
+ card->perf_stats.outbound_cnt++;
+ card->perf_stats.outbound_start_time = qeth_get_micros();
+ }
netif_stop_queue(dev);
if ((rc = qeth_send_packet(card, skb))) {
if (rc == -EBUSY) {
}
}
netif_wake_queue(dev);
-#ifdef CONFIG_QETH_PERF_STATS
- card->perf_stats.outbound_time += qeth_get_micros() -
- card->perf_stats.outbound_start_time;
-#endif
+ if (card->options.performance_stats)
+ card->perf_stats.outbound_time += qeth_get_micros() -
+ card->perf_stats.outbound_start_time;
return rc;
}
}
}
-static inline int
-qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
- struct qeth_hdr **hdr, int ipv)
+static inline struct qeth_hdr *
+__qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb, int ipv)
{
- int rc = 0;
#ifdef CONFIG_QETH_VLAN
u16 *tag;
-#endif
-
- QETH_DBF_TEXT(trace, 6, "prepskb");
- if (card->info.type == QETH_CARD_TYPE_OSN) {
- *hdr = (struct qeth_hdr *)(*skb)->data;
- return rc;
- }
- rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
- if (rc)
- return rc;
-#ifdef CONFIG_QETH_VLAN
- if (card->vlangrp && vlan_tx_tag_present(*skb) &&
+ if (card->vlangrp && vlan_tx_tag_present(skb) &&
((ipv == 6) || card->options.layer2) ) {
/*
* Move the mac addresses (6 bytes src, 6 bytes dest)
* to the beginning of the new header. We are using three
* memcpys instead of one memmove to save cycles.
*/
- skb_push(*skb, VLAN_HLEN);
- memcpy((*skb)->data, (*skb)->data + 4, 4);
- memcpy((*skb)->data + 4, (*skb)->data + 8, 4);
- memcpy((*skb)->data + 8, (*skb)->data + 12, 4);
- tag = (u16 *)((*skb)->data + 12);
+ skb_push(skb, VLAN_HLEN);
+ memcpy(skb->data, skb->data + 4, 4);
+ memcpy(skb->data + 4, skb->data + 8, 4);
+ memcpy(skb->data + 8, skb->data + 12, 4);
+ tag = (u16 *)(skb->data + 12);
/*
* first two bytes = ETH_P_8021Q (0x8100)
* second two bytes = VLANID
*/
*tag = __constant_htons(ETH_P_8021Q);
- *(tag + 1) = htons(vlan_tx_tag_get(*skb));
+ *(tag + 1) = htons(vlan_tx_tag_get(skb));
}
#endif
- *hdr = (struct qeth_hdr *)
- qeth_push_skb(card, skb, sizeof(struct qeth_hdr));
- if (*hdr == NULL)
- return -EINVAL;
- return 0;
+ return ((struct qeth_hdr *)
+ qeth_push_skb(card, skb, sizeof(struct qeth_hdr)));
+}
+
+static inline void
+__qeth_free_new_skb(struct sk_buff *orig_skb, struct sk_buff *new_skb)
+{
+ if (orig_skb != new_skb)
+ dev_kfree_skb_any(new_skb);
+}
+
+static inline struct sk_buff *
+qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb,
+ struct qeth_hdr **hdr, int ipv)
+{
+ struct sk_buff *new_skb;
+
+ QETH_DBF_TEXT(trace, 6, "prepskb");
+
+ new_skb = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
+ if (new_skb == NULL)
+ return NULL;
+ *hdr = __qeth_prepare_skb(card, new_skb, ipv);
+ if (*hdr == NULL) {
+ __qeth_free_new_skb(skb, new_skb);
+ return NULL;
+ }
+ return new_skb;
}
static inline u8
flush_cnt = 1;
} else {
QETH_DBF_TEXT(trace, 6, "fillbfpa");
-#ifdef CONFIG_QETH_PERF_STATS
- queue->card->perf_stats.skbs_sent_pack++;
-#endif
+ if (queue->card->options.performance_stats)
+ queue->card->perf_stats.skbs_sent_pack++;
if (buf->next_element_to_fill >=
QETH_MAX_BUFFER_ELEMENTS(queue->card)) {
/*
* check if buffer is empty to make sure that we do not 'overtake'
* ourselves and try to fill a buffer that is already primed
*/
- if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) {
- card->stats.tx_dropped++;
- atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
- return -EBUSY;
- }
+ if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY)
+ goto out;
if (ctx == NULL)
queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) %
QDIO_MAX_BUFFERS_PER_Q;
else {
buffers_needed = qeth_eddp_check_buffers_for_context(queue,ctx);
- if (buffers_needed < 0) {
- card->stats.tx_dropped++;
- atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
- return -EBUSY;
- }
+ if (buffers_needed < 0)
+ goto out;
queue->next_buf_to_fill =
(queue->next_buf_to_fill + buffers_needed) %
QDIO_MAX_BUFFERS_PER_Q;
qeth_flush_buffers(queue, 0, index, flush_cnt);
}
return 0;
+out:
+ atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
+ return -EBUSY;
}
static inline int
* check if buffer is empty to make sure that we do not 'overtake'
* ourselves and try to fill a buffer that is already primed
*/
- if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY){
- card->stats.tx_dropped++;
+ if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) {
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
return -EBUSY;
}
* again */
if (atomic_read(&buffer->state) !=
QETH_QDIO_BUF_EMPTY){
- card->stats.tx_dropped++;
qeth_flush_buffers(queue, 0, start_index, flush_count);
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
return -EBUSY;
* free buffers) to handle eddp context */
if (qeth_eddp_check_buffers_for_context(queue,ctx) < 0){
printk("eddp tx_dropped 1\n");
- card->stats.tx_dropped++;
rc = -EBUSY;
goto out;
}
tmp = qeth_eddp_fill_buffer(queue,ctx,queue->next_buf_to_fill);
if (tmp < 0) {
printk("eddp tx_dropped 2\n");
- card->stats.tx_dropped++;
rc = - EBUSY;
goto out;
}
qeth_flush_buffers(queue, 0, start_index, flush_count);
}
/* at this point the queue is UNLOCKED again */
-#ifdef CONFIG_QETH_PERF_STATS
- if (do_pack)
+ if (queue->card->options.performance_stats && do_pack)
queue->card->perf_stats.bufs_sent_pack += flush_count;
-#endif /* CONFIG_QETH_PERF_STATS */
return rc;
}
{
int elements_needed = 0;
- if (skb_shinfo(skb)->nr_frags > 0) {
+ if (skb_shinfo(skb)->nr_frags > 0)
elements_needed = (skb_shinfo(skb)->nr_frags + 1);
- }
- if (elements_needed == 0 )
+ if (elements_needed == 0)
elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
+ skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)){
- PRINT_ERR("qeth_do_send_packet: invalid size of "
- "IP packet (Number=%d / Length=%d). Discarded.\n",
+ PRINT_ERR("Invalid size of IP packet "
+ "(Number=%d / Length=%d). Discarded.\n",
(elements_needed+elems), skb->len);
return 0;
}
return elements_needed;
}
+
static inline int
qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
{
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
int tx_bytes = skb->len;
-#ifdef CONFIG_QETH_PERF_STATS
unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
unsigned short tso_size = skb_shinfo(skb)->gso_size;
-#endif
+ struct sk_buff *new_skb, *new_skb2;
int rc;
QETH_DBF_TEXT(trace, 6, "sendpkt");
+ new_skb = skb;
+ if ((card->info.type == QETH_CARD_TYPE_OSN) &&
+ (skb->protocol == htons(ETH_P_IPV6)))
+ return -EPERM;
+ cast_type = qeth_get_cast_type(card, skb);
+ if ((cast_type == RTN_BROADCAST) &&
+ (card->info.broadcast_capable == 0))
+ return -EPERM;
+ queue = card->qdio.out_qs
+ [qeth_get_priority_queue(card, skb, ipv, cast_type)];
if (!card->options.layer2) {
ipv = qeth_get_ip_version(skb);
if ((card->dev->hard_header == qeth_fake_header) && ipv) {
- if ((skb = qeth_pskb_unshare(skb,GFP_ATOMIC)) == NULL) {
- card->stats.tx_dropped++;
- dev_kfree_skb_irq(skb);
- return 0;
- }
+ new_skb = qeth_pskb_unshare(skb, GFP_ATOMIC);
+ if (!new_skb)
+ return -ENOMEM;
if(card->dev->type == ARPHRD_IEEE802_TR){
- skb_pull(skb, QETH_FAKE_LL_LEN_TR);
+ skb_pull(new_skb, QETH_FAKE_LL_LEN_TR);
} else {
- skb_pull(skb, QETH_FAKE_LL_LEN_ETH);
+ skb_pull(new_skb, QETH_FAKE_LL_LEN_ETH);
}
}
}
- if ((card->info.type == QETH_CARD_TYPE_OSN) &&
- (skb->protocol == htons(ETH_P_IPV6))) {
- dev_kfree_skb_any(skb);
- return 0;
- }
- cast_type = qeth_get_cast_type(card, skb);
- if ((cast_type == RTN_BROADCAST) &&
- (card->info.broadcast_capable == 0)){
- card->stats.tx_dropped++;
- card->stats.tx_errors++;
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
- queue = card->qdio.out_qs
- [qeth_get_priority_queue(card, skb, ipv, cast_type)];
-
if (skb_is_gso(skb))
large_send = card->options.large_send;
-
- /*are we able to do TSO ? If so ,prepare and send it from here */
+ /* check on OSN device*/
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ hdr = (struct qeth_hdr *)new_skb->data;
+ /*are we able to do TSO ? */
if ((large_send == QETH_LARGE_SEND_TSO) &&
(cast_type == RTN_UNSPEC)) {
- rc = qeth_tso_prepare_packet(card, skb, ipv, cast_type);
+ rc = qeth_tso_prepare_packet(card, new_skb, ipv, cast_type);
if (rc) {
- card->stats.tx_dropped++;
- card->stats.tx_errors++;
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
+ __qeth_free_new_skb(skb, new_skb);
+ return rc;
}
elements_needed++;
- } else {
- if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) {
- QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc);
- return rc;
+ } else if (card->info.type != QETH_CARD_TYPE_OSN) {
+ new_skb2 = qeth_prepare_skb(card, new_skb, &hdr, ipv);
+ if (!new_skb2) {
+ __qeth_free_new_skb(skb, new_skb);
+ return -EINVAL;
}
- if (card->info.type != QETH_CARD_TYPE_OSN)
- qeth_fill_header(card, hdr, skb, ipv, cast_type);
+ if (new_skb != skb)
+ __qeth_free_new_skb(new_skb2, new_skb);
+ new_skb = new_skb2;
+ qeth_fill_header(card, hdr, new_skb, ipv, cast_type);
}
-
if (large_send == QETH_LARGE_SEND_EDDP) {
- ctx = qeth_eddp_create_context(card, skb, hdr);
+ ctx = qeth_eddp_create_context(card, new_skb, hdr);
if (ctx == NULL) {
+ __qeth_free_new_skb(skb, new_skb);
PRINT_WARN("could not create eddp context\n");
return -EINVAL;
}
} else {
- int elems = qeth_get_elements_no(card,(void*) hdr, skb,
+ int elems = qeth_get_elements_no(card,(void*) hdr, new_skb,
elements_needed);
- if (!elems)
+ if (!elems) {
+ __qeth_free_new_skb(skb, new_skb);
return -EINVAL;
+ }
elements_needed += elems;
}
if (card->info.type != QETH_CARD_TYPE_IQD)
- rc = qeth_do_send_packet(card, queue, skb, hdr,
+ rc = qeth_do_send_packet(card, queue, new_skb, hdr,
elements_needed, ctx);
else
- rc = qeth_do_send_packet_fast(card, queue, skb, hdr,
+ rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
elements_needed, ctx);
- if (!rc){
+ if (!rc) {
card->stats.tx_packets++;
card->stats.tx_bytes += tx_bytes;
-#ifdef CONFIG_QETH_PERF_STATS
- if (tso_size &&
- !(large_send == QETH_LARGE_SEND_NO)) {
- card->perf_stats.large_send_bytes += tx_bytes;
- card->perf_stats.large_send_cnt++;
- }
- if (nr_frags > 0){
- card->perf_stats.sg_skbs_sent++;
- /* nr_frags + skb->data */
- card->perf_stats.sg_frags_sent +=
- nr_frags + 1;
+ if (new_skb != skb)
+ dev_kfree_skb_any(skb);
+ if (card->options.performance_stats) {
+ if (tso_size &&
+ !(large_send == QETH_LARGE_SEND_NO)) {
+ card->perf_stats.large_send_bytes += tx_bytes;
+ card->perf_stats.large_send_cnt++;
+ }
+ if (nr_frags > 0) {
+ card->perf_stats.sg_skbs_sent++;
+ /* nr_frags + skb->data */
+ card->perf_stats.sg_frags_sent +=
+ nr_frags + 1;
+ }
}
-#endif /* CONFIG_QETH_PERF_STATS */
+ } else {
+ card->stats.tx_dropped++;
+ __qeth_free_new_skb(skb, new_skb);
}
if (ctx != NULL) {
/* drop creator's reference */
qeth_eddp_put_context(ctx);
/* free skb; it's not referenced by a buffer */
- if (rc == 0)
- dev_kfree_skb_any(skb);
-
+ if (!rc)
+ dev_kfree_skb_any(new_skb);
}
return rc;
}
QETH_DBF_TEXT(trace,3,"setrtg6");
#ifdef CONFIG_QETH_IPV6
+ if (!qeth_is_supported(card, IPA_IPV6))
+ return 0;
qeth_correct_routing_type(card, &card->options.route6.type,
QETH_PROT_IPV6);
QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
goto out_remove;
}
- card->state = CARD_STATE_SOFTSETUP;
if ((rc = qeth_init_qdio_queues(card))){
QETH_DBF_TEXT_(setup, 2, "6err%d", rc);
goto out_remove;
}
+ card->state = CARD_STATE_SOFTSETUP;
netif_carrier_on(card->dev);
qeth_set_allowed_threads(card, 0xffffffff, 0);
static void
qeth_sysfs_unregister(void)
{
+ s390_root_dev_unregister(qeth_root_dev);
qeth_remove_driver_attributes();
ccw_driver_unregister(&qeth_ccw_driver);
ccwgroup_driver_unregister(&qeth_ccwgroup_driver);
- s390_root_dev_unregister(qeth_root_dev);
}
+
/**
* register qeth at sysfs
*/
static int
qeth_sysfs_register(void)
{
- int rc=0;
+ int rc;
rc = ccwgroup_driver_register(&qeth_ccwgroup_driver);
if (rc)
- return rc;
+ goto out;
+
rc = ccw_driver_register(&qeth_ccw_driver);
if (rc)
- return rc;
+ goto out_ccw_driver;
+
rc = qeth_create_driver_attributes();
if (rc)
- return rc;
+ goto out_qeth_attr;
+
qeth_root_dev = s390_root_dev_register("qeth");
- if (IS_ERR(qeth_root_dev)) {
- rc = PTR_ERR(qeth_root_dev);
- return rc;
- }
- return 0;
+ rc = IS_ERR(qeth_root_dev) ? PTR_ERR(qeth_root_dev) : 0;
+ if (!rc)
+ goto out;
+
+ qeth_remove_driver_attributes();
+out_qeth_attr:
+ ccw_driver_unregister(&qeth_ccw_driver);
+out_ccw_driver:
+ ccwgroup_driver_unregister(&qeth_ccwgroup_driver);
+out:
+ return rc;
}
/***
static int __init
qeth_init(void)
{
- int rc=0;
+ int rc;
PRINT_INFO("loading %s\n", version);
spin_lock_init(&qeth_notify_lock);
rwlock_init(&qeth_card_list.rwlock);
- if (qeth_register_dbf_views())
+ rc = qeth_register_dbf_views();
+ if (rc)
goto out_err;
- if (qeth_sysfs_register())
- goto out_sysfs;
+
+ rc = qeth_sysfs_register();
+ if (rc)
+ goto out_dbf;
#ifdef CONFIG_QETH_IPV6
- if (qeth_ipv6_init()) {
- PRINT_ERR("Out of memory during ipv6 init.\n");
+ rc = qeth_ipv6_init();
+ if (rc) {
+ PRINT_ERR("Out of memory during ipv6 init code = %d\n", rc);
goto out_sysfs;
}
#endif /* QETH_IPV6 */
- if (qeth_register_notifiers())
+ rc = qeth_register_notifiers();
+ if (rc)
goto out_ipv6;
- if (qeth_create_procfs_entries())
+ rc = qeth_create_procfs_entries();
+ if (rc)
goto out_notifiers;
return rc;
out_ipv6:
#ifdef CONFIG_QETH_IPV6
qeth_ipv6_uninit();
-#endif /* QETH_IPV6 */
out_sysfs:
+#endif /* QETH_IPV6 */
qeth_sysfs_unregister();
+out_dbf:
qeth_unregister_dbf_views();
out_err:
- PRINT_ERR("Initialization failed");
+ PRINT_ERR("Initialization failed with code %d\n", rc);
return rc;
}
#define QETH_PERF_PROCFILE_NAME "qeth_perf"
static struct proc_dir_entry *qeth_perf_procfile;
-#ifdef CONFIG_QETH_PERF_STATS
static int
qeth_perf_procfile_seq_show(struct seq_file *s, void *it)
{
CARD_DDEV_ID(card),
QETH_CARD_IFNAME(card)
);
+ if (!card->options.performance_stats)
+ seq_printf(s, "Performance statistics are deactivated.\n");
seq_printf(s, " Skb's/buffers received : %lu/%u\n"
" Skb's/buffers sent : %lu/%u\n\n",
- card->stats.rx_packets, card->perf_stats.bufs_rec,
- card->stats.tx_packets, card->perf_stats.bufs_sent
+ card->stats.rx_packets -
+ card->perf_stats.initial_rx_packets,
+ card->perf_stats.bufs_rec,
+ card->stats.tx_packets -
+ card->perf_stats.initial_tx_packets,
+ card->perf_stats.bufs_sent
);
seq_printf(s, " Skb's/buffers sent without packing : %lu/%u\n"
" Skb's/buffers sent with packing : %u/%u\n\n",
- card->stats.tx_packets - card->perf_stats.skbs_sent_pack,
+ card->stats.tx_packets - card->perf_stats.initial_tx_packets
+ - card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent - card->perf_stats.bufs_sent_pack,
card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent_pack
.release = seq_release,
};
-#define qeth_perf_procfile_created qeth_perf_procfile
-#else
-#define qeth_perf_procfile_created 1
-#endif /* CONFIG_QETH_PERF_STATS */
-
int __init
qeth_create_procfs_entries(void)
{
if (qeth_procfile)
qeth_procfile->proc_fops = &qeth_procfile_fops;
-#ifdef CONFIG_QETH_PERF_STATS
qeth_perf_procfile = create_proc_entry(QETH_PERF_PROCFILE_NAME,
S_IFREG | 0444, NULL);
if (qeth_perf_procfile)
qeth_perf_procfile->proc_fops = &qeth_perf_procfile_fops;
-#endif /* CONFIG_QETH_PERF_STATS */
if (qeth_procfile &&
- qeth_perf_procfile_created)
+ qeth_perf_procfile)
return 0;
else
return -ENOMEM;
static DEVICE_ATTR(layer2, 0644, qeth_dev_layer2_show,
qeth_dev_layer2_store);
+static ssize_t
+qeth_dev_performance_stats_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct qeth_card *card = dev->driver_data;
+
+ if (!card)
+ return -EINVAL;
+
+ return sprintf(buf, "%i\n", card->options.performance_stats ? 1:0);
+}
+
+static ssize_t
+qeth_dev_performance_stats_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct qeth_card *card = dev->driver_data;
+ char *tmp;
+ int i;
+
+ if (!card)
+ return -EINVAL;
+
+ i = simple_strtoul(buf, &tmp, 16);
+ if ((i == 0) || (i == 1)) {
+ if (i == card->options.performance_stats)
+ return count;
+ card->options.performance_stats = i;
+ if (i == 0)
+ memset(&card->perf_stats, 0,
+ sizeof(struct qeth_perf_stats));
+ card->perf_stats.initial_rx_packets = card->stats.rx_packets;
+ card->perf_stats.initial_tx_packets = card->stats.tx_packets;
+ } else {
+ PRINT_WARN("performance_stats: write 0 or 1 to this file!\n");
+ return -EINVAL;
+ }
+ return count;
+}
+
+static DEVICE_ATTR(performance_stats, 0644, qeth_dev_performance_stats_show,
+ qeth_dev_performance_stats_store);
+
static ssize_t
qeth_dev_large_send_show(struct device *dev, struct device_attribute *attr, char *buf)
{
&dev_attr_canonical_macaddr,
&dev_attr_layer2,
&dev_attr_large_send,
+ &dev_attr_performance_stats,
NULL,
};
{
const char *start, *end;
char *tmp;
- char buffer[49] = {0, };
+ char buffer[40] = {0, };
start = buf;
/* get address string */
end = strchr(start, '/');
- if (!end || (end-start >= 49)){
+ if (!end || (end - start >= 40)){
PRINT_WARN("Invalid format for ipato_addx/delx. "
"Use <ip addr>/<mask bits>\n");
return -EINVAL;
}
start = end + 1;
*mask_bits = simple_strtoul(start, &tmp, 10);
-
+ if (!strlen(start) ||
+ (tmp == start) ||
+ (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) {
+ PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n");
+ return -EINVAL;
+ }
return 0;
}
sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
+ return ret;
}
- if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_blkt_group)))
+ if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_blkt_group))){
+ sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
+ sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
+ sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
+ sysfs_remove_group(&dev->kobj, &qeth_device_rxip_group);
return ret;
-
- return ret;
+ }
+ return 0;
}
void
qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb)
{
QETH_DBF_TEXT(trace, 5, "tsoprsk");
- return qeth_push_skb(card, skb, sizeof(struct qeth_hdr_tso));
+ return qeth_push_skb(card, *skb, sizeof(struct qeth_hdr_tso));
}
/**
void *pval;
int len;
- pval = of_get_property(dp, op->oprom_array, &len);
- if (!pval || len <= 0 || len > bufsize)
+ if (!dp ||
+ !(pval = of_get_property(dp, op->oprom_array, &len)) ||
+ len <= 0 || len > bufsize)
return copyout(argp, op, sizeof(int));
memcpy(op->oprom_array, pval, len);
struct property *prop;
int len;
+ if (!dp)
+ return copyout(argp, op, sizeof(int));
if (op->oprom_array[0] == '\0') {
prop = dp->properties;
if (!prop)
static int oprompath2node(void __user *argp, struct device_node *dp, struct openpromio *op, int bufsize, DATA *data)
{
+ phandle ph = 0;
+
dp = of_find_node_by_path(op->oprom_array);
+ if (dp)
+ ph = dp->node;
data->current_node = dp;
- *((int *)op->oprom_array) = dp->node;
+ *((int *)op->oprom_array) = ph;
op->oprom_size = sizeof(int);
return copyout(argp, op, bufsize + sizeof(int));
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
- if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
- rc = -EINVAL;
- reason = "device reports illegal type";
- goto err_out;
+ rc = -EINVAL;
+ reason = "device reports illegal type";
+
+ if (class == ATA_DEV_ATA) {
+ if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
+ goto err_out;
+ } else {
+ if (ata_id_is_ata(id))
+ goto err_out;
}
if (post_reset && class == ATA_DEV_ATA) {
struct scsi_device *sdev = scmd->device;
struct Scsi_Host *shost = sdev->host;
int old_result = scmd->result;
- DECLARE_COMPLETION(done);
+ DECLARE_COMPLETION_ONSTACK(done);
unsigned long timeleft;
unsigned long flags;
unsigned char old_cmnd[MAX_COMMAND_SIZE];
static int s3c2412_serial_probe(struct platform_device *dev)
{
dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+ return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
}
static struct platform_driver s3c2412_serial_drv = {
#endif /* EXT2FS_DEBUG */
-/* Superblock must be locked */
unsigned long ext2_count_free_blocks (struct super_block * sb)
{
struct ext2_group_desc * desc;
return ERR_PTR(err);
}
-/* Superblock must be locked */
unsigned long ext2_count_free_inodes (struct super_block * sb)
{
struct ext2_group_desc *desc;
#endif
};
+static struct dentry *ext2_get_dentry(struct super_block *sb, void *vobjp)
+{
+ __u32 *objp = vobjp;
+ unsigned long ino = objp[0];
+ __u32 generation = objp[1];
+ struct inode *inode;
+ struct dentry *result;
+
+ if (ino < EXT2_FIRST_INO(sb) && ino != EXT2_ROOT_INO)
+ return ERR_PTR(-ESTALE);
+ if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count))
+ return ERR_PTR(-ESTALE);
+
+ /* iget isn't really right if the inode is currently unallocated!!
+ * ext2_read_inode currently does appropriate checks, but
+ * it might be "neater" to call ext2_get_inode first and check
+ * if the inode is valid.....
+ */
+ inode = iget(sb, ino);
+ if (inode == NULL)
+ return ERR_PTR(-ENOMEM);
+ if (is_bad_inode(inode) ||
+ (generation && inode->i_generation != generation)) {
+ /* we didn't find the right inode.. */
+ iput(inode);
+ return ERR_PTR(-ESTALE);
+ }
+ /* now to find a dentry.
+ * If possible, get a well-connected one
+ */
+ result = d_alloc_anon(inode);
+ if (!result) {
+ iput(inode);
+ return ERR_PTR(-ENOMEM);
+ }
+ return result;
+}
+
/* Yes, most of these are left as NULL!!
* A NULL value implies the default, which works with ext2-like file
* systems, but can be improved upon.
*/
static struct export_operations ext2_export_ops = {
.get_parent = ext2_get_parent,
+ .get_dentry = ext2_get_dentry,
};
static unsigned long get_sb_block(void **data)
unsigned long overhead;
int i;
- lock_super(sb);
if (test_opt (sb, MINIX_DF))
overhead = 0;
else {
buf->f_files = le32_to_cpu(sbi->s_es->s_inodes_count);
buf->f_ffree = ext2_count_free_inodes (sb);
buf->f_namelen = EXT2_NAME_LEN;
- unlock_super(sb);
return 0;
}
set_buffer_new(bh_result);
got_it:
map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key));
- if (blocks_to_boundary == 0)
+ if (count > blocks_to_boundary)
set_buffer_boundary(bh_result);
err = count;
/* Clean up and exit */
return 0;
}
+
+static struct dentry *ext3_get_dentry(struct super_block *sb, void *vobjp)
+{
+ __u32 *objp = vobjp;
+ unsigned long ino = objp[0];
+ __u32 generation = objp[1];
+ struct inode *inode;
+ struct dentry *result;
+
+ if (ino < EXT3_FIRST_INO(sb) && ino != EXT3_ROOT_INO)
+ return ERR_PTR(-ESTALE);
+ if (ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count))
+ return ERR_PTR(-ESTALE);
+
+ /* iget isn't really right if the inode is currently unallocated!!
+ *
+ * ext3_read_inode will return a bad_inode if the inode had been
+ * deleted, so we should be safe.
+ *
+ * Currently we don't know the generation for parent directory, so
+ * a generation of 0 means "accept any"
+ */
+ inode = iget(sb, ino);
+ if (inode == NULL)
+ return ERR_PTR(-ENOMEM);
+ if (is_bad_inode(inode) ||
+ (generation && inode->i_generation != generation)) {
+ iput(inode);
+ return ERR_PTR(-ESTALE);
+ }
+ /* now to find a dentry.
+ * If possible, get a well-connected one
+ */
+ result = d_alloc_anon(inode);
+ if (!result) {
+ iput(inode);
+ return ERR_PTR(-ENOMEM);
+ }
+ return result;
+}
+
#ifdef CONFIG_QUOTA
#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
static struct export_operations ext3_export_ops = {
.get_parent = ext3_get_parent,
+ .get_dentry = ext3_get_dentry,
};
enum {
#include <linux/pagemap.h>
#include "nodelist.h"
+static void jffs2_obsolete_node_frag(struct jffs2_sb_info *c,
+ struct jffs2_node_frag *this);
+
void jffs2_add_fd_to_list(struct jffs2_sb_info *c, struct jffs2_full_dirent *new, struct jffs2_full_dirent **list)
{
struct jffs2_full_dirent **prev = list;
}
}
-void jffs2_obsolete_node_frag(struct jffs2_sb_info *c, struct jffs2_node_frag *this)
+static void jffs2_obsolete_node_frag(struct jffs2_sb_info *c,
+ struct jffs2_node_frag *this)
{
if (this->node) {
this->node->frags--;
struct rb_node *rb_next(struct rb_node *);
struct rb_node *rb_prev(struct rb_node *);
void rb_replace_node(struct rb_node *victim, struct rb_node *new, struct rb_root *root);
-void jffs2_obsolete_node_frag(struct jffs2_sb_info *c, struct jffs2_node_frag *this);
int jffs2_add_full_dnode_to_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_full_dnode *fn);
void jffs2_truncate_fragtree (struct jffs2_sb_info *c, struct rb_root *list, uint32_t size);
int jffs2_add_older_frag_to_fragtree(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_tmp_dnode_info *tn);
union jffs2_node_union *node;
struct jffs2_eraseblock *jeb;
+ if (c->summary->sum_size == JFFS2_SUMMARY_NOSUM_SIZE) {
+ dbg_summary("Summary is disabled for this jeb! Skipping summary info!\n");
+ return 0;
+ }
+
node = invecs[0].iov_base;
jeb = &c->blocks[ofs / c->sector_size];
ofs -= jeb->offset;
rc = jffs2_reserve_space_gc(c, totlen, &length, JFFS2_SUMMARY_XATTR_SIZE);
if (rc) {
JFFS2_WARNING("jffs2_reserve_space_gc()=%d, request=%u\n", rc, totlen);
- rc = rc ? rc : -EBADFD;
goto out;
}
rc = save_xattr_datum(c, xd);
status = -ENOMEM;
opendata = nfs4_opendata_alloc(dentry, sp, flags, sattr);
if (opendata == NULL)
- goto err_put_state_owner;
+ goto err_release_rwsem;
status = _nfs4_proc_open(opendata);
if (status != 0)
return 0;
err_opendata_free:
nfs4_opendata_free(opendata);
+err_release_rwsem:
+ up_read(&clp->cl_sem);
err_put_state_owner:
nfs4_put_state_owner(sp);
out_err:
- /* Note: clp->cl_sem must be released before nfs4_put_open_state()! */
- up_read(&clp->cl_sem);
*res = NULL;
return status;
}
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
spin_unlock(&inode->i_lock);
- nfs_readpage_truncate_uninitialised_page(rdata);
- if (rdata->res.eof || rdata->res.count == rdata->args.count)
+ if (rdata->res.eof || rdata->res.count == rdata->args.count) {
SetPageUptodate(page);
+ if (rdata->res.eof && count != 0)
+ memclear_highpage_flush(page, rdata->args.pgbase, count);
+ }
result = 0;
io_error:
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_inode_remove_request(req);
- nfs_clear_page_writeback(req);
dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS);
+ nfs_clear_page_writeback(req);
}
}
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_mark_request_commit(req);
- nfs_clear_page_writeback(req);
dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS);
+ nfs_clear_page_writeback(req);
}
return -ENOMEM;
}
include include/asm-generic/Kbuild.asm
-unifdef-y += console.h fpu.h sysinfo.h
+unifdef-y += console.h fpu.h sysinfo.h compiler.h
header-y += gentrap.h regdef.h pal.h reg.h
__asm__("stw %1,%0" : "=m"(mem) : "r"(val))
#endif
+#ifdef __KERNEL__
/* Some idiots over in <linux/compiler.h> thought inline should imply
always_inline. This breaks stuff. We'll include this file whenever
we run into such problems. */
#undef __always_inline
#define __always_inline inline __attribute__((always_inline))
+#endif /* __KERNEL__ */
+
#endif /* __ALPHA_COMPILER_H */
#ifndef _ALPHA_PAGE_H
#define _ALPHA_PAGE_H
+#ifdef __KERNEL__
+
#include <asm/pal.h>
/* PAGE_SHIFT determines the page size */
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#define STRICT_MM_TYPECHECKS
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif /* __KERNEL__ */
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
+#endif /* __KERNEL__ */
#endif /* _ALPHA_PAGE_H */
--- /dev/null
+/* linux/include/asm/arch-s3c2410/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
+
+#define S3C2412_PWRCFG_BATF_IGNORE (0<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
+#define S3C2412_PWRCFG_BATF_MASK (3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8)
+#define S3C2412_PWRCFG_NAND_NORST (1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
#include <asm/ptrace.h>
#include <asm/user.h>
+#ifdef __KERNEL
#include <asm/procinfo.h>
+#endif
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
#define ARCH_SLAB_MINALIGN 8
#endif
-#endif /* __KERNEL__ */
-
#include <asm-generic/page.h>
+#endif /* __KERNEL__ */
+
#endif
ioctls.h ipcbuf.h mman.h msgbuf.h param.h poll.h \
posix_types.h ptrace.h resource.h sembuf.h shmbuf.h shmparam.h \
sigcontext.h siginfo.h signal.h socket.h sockios.h stat.h \
- statfs.h termbits.h termios.h timex.h types.h unistd.h user.h
+ statfs.h termbits.h termios.h types.h unistd.h user.h
# These probably shouldn't be exported
unifdef-y += elf.h page.h
include include/asm-generic/Kbuild.asm
-header-y += boot.h debugreg.h ldt.h setup.h ucontext.h
+header-y += boot.h debugreg.h ldt.h ucontext.h
-unifdef-y += mtrr.h vm86.h
+unifdef-y += mtrr.h setup.h vm86.h
#include <asm/ptrace.h>
#include <asm/user.h>
-#include <asm/processor.h>
-#include <asm/system.h> /* for savesegment */
#include <asm/auxvec.h>
-#include <asm/desc.h>
#include <linux/utsname.h>
#define ELF_DATA ELFDATA2LSB
#define ELF_ARCH EM_386
+#ifdef __KERNEL__
+
+#include <asm/processor.h>
+#include <asm/system.h> /* for savesegment */
+#include <asm/desc.h>
+
/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
contains a pointer to a function which might be registered using `atexit'.
This provides a mean for the dynamic linker to call DT_FINI functions for
#define ELF_PLATFORM (system_utsname.machine)
-#ifdef __KERNEL__
#define SET_PERSONALITY(ex, ibcs2) do { } while (0)
/*
#ifndef _i386_SETUP_H
#define _i386_SETUP_H
+#ifdef __KERNEL__
#include <linux/pfn.h>
/*
*/
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
#define MAX_NONPAE_PFN (1 << 20)
+#endif
#define PARAM_SIZE 4096
#define COMMAND_LINE_SIZE 256
#define _ASMi386_SIGNAL_H
#include <linux/types.h>
-#include <linux/linkage.h>
#include <linux/time.h>
#include <linux/compiler.h>
struct siginfo;
#ifdef __KERNEL__
+
+#include <linux/linkage.h>
+
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
struct task_struct; /* one of the stranger aspects of C forward declarations.. */
extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
#define switch_to(prev,next,last) do { \
unsigned long esi,edi; \
- asm volatile("pushl %%ebp\n\t" \
+ asm volatile("pushfl\n\t" /* Save flags */ \
+ "pushl %%ebp\n\t" \
"movl %%esp,%0\n\t" /* save ESP */ \
"movl %5,%%esp\n\t" /* restore ESP */ \
"movl $1f,%1\n\t" /* save EIP */ \
"jmp __switch_to\n" \
"1:\t" \
"popl %%ebp\n\t" \
+ "popfl" \
:"=m" (prev->thread.esp),"=m" (prev->thread.eip), \
"=a" (last),"=S" (esi),"=D" (edi) \
:"m" (next->thread.esp),"m" (next->thread.eip), \
#define __NR_vmsplice 316
#define __NR_move_pages 317
+#ifdef __KERNEL__
+
#define NR_syscalls 318
/*
__syscall_return(type,__res); \
}
-#ifdef __KERNEL__
-
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
intel_intrin.h intrinsics.h perfmon_default_smpl.h \
ptrace_offsets.h rse.h setup.h ucontext.h
-unifdef-y += perfmon.h
+unifdef-y += perfmon.h ustack.h
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+# ifdef __KERNEL__
#include <asm/intrinsics.h>
#include <asm/types.h>
# define __pa(x) ((x) - PAGE_OFFSET)
# define __va(x) ((x) + PAGE_OFFSET)
#else /* !__ASSEMBLY */
-# ifdef __KERNEL__
# define STRICT_MM_TYPECHECKS
extern void clear_page (void *page);
return order;
}
-# endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
#ifdef STRICT_MM_TYPECHECKS
(((current->personality & READ_IMPLIES_EXEC) != 0) \
? VM_EXEC : 0))
+# endif /* __KERNEL__ */
#endif /* _ASM_IA64_PAGE_H */
#include <asm/fpu.h>
+
+#ifdef __KERNEL__
#ifndef ASM_OFFSETS_C
#include <asm/asm-offsets.h>
#endif
#define KERNEL_STACK_SIZE IA64_STK_OFFSET
-#ifndef __ASSEMBLY__
+#endif /* __KERNEL__ */
-#include <asm/current.h>
-#include <asm/page.h>
+#ifndef __ASSEMBLY__
/*
* This struct defines the way the registers are saved on system
#ifdef __KERNEL__
+#include <asm/current.h>
+#include <asm/page.h>
+
#define __ARCH_SYS_PTRACE 1
/*
* Constants for the user stack size
*/
+#ifdef __KERNEL__
#include <asm/page.h>
/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
#define MAX_USER_STACK_SIZE (RGN_MAP_LIMIT/2)
-/* Make a default stack size of 2GB */
-#define DEFAULT_USER_STACK_SIZE (1UL << 31)
#define STACK_TOP (0x6000000000000000UL + RGN_MAP_LIMIT)
+#endif
+
+/* Make a default stack size of 2GiB */
+#define DEFAULT_USER_STACK_SIZE (1UL << 31)
#endif /* _ASM_IA64_USTACK_H */
#define _M68K_PAGE_H
+#ifdef __KERNEL__
+
/* PAGE_SHIFT determines the page size */
#ifndef CONFIG_SUN3
#define PAGE_SHIFT (12)
#endif
#define PAGE_MASK (~(PAGE_SIZE-1))
-#ifdef __KERNEL__
-
#include <asm/setup.h>
#if PAGE_SHIFT < 13
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif /* __KERNEL__ */
-
#include <asm-generic/page.h>
+#endif /* __KERNEL__ */
+
#endif /* _M68K_PAGE_H */
#include <spaces.h>
-#endif
-
/*
* PAGE_SHIFT determines the page size
*/
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
-
-#ifdef __KERNEL__
#ifndef __ASSEMBLY__
extern void clear_page(void * page);
#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
-#endif /* defined (__KERNEL__) */
-
#ifdef CONFIG_LIMITED_DMA
#define WANT_PAGE_VIRTUAL
#endif
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
+#endif /* defined (__KERNEL__) */
+
#endif /* _ASM_PAGE_H */
#ifndef _PARISC_PAGE_H
#define _PARISC_PAGE_H
-#if !defined(__KERNEL__)
-/* this is for userspace applications (4k page size) */
-# define PAGE_SHIFT 12 /* 4k */
-# define PAGE_SIZE (1UL << PAGE_SHIFT)
-# define PAGE_MASK (~(PAGE_SIZE-1))
-#endif
-
-
#ifdef __KERNEL__
#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
-# define PAGE_SHIFT 12 /* 4k */
+# define PAGE_SHIFT 12
#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
-# define PAGE_SHIFT 14 /* 16k */
+# define PAGE_SHIFT 14
#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
-# define PAGE_SHIFT 16 /* 64k */
+# define PAGE_SHIFT 16
#else
# error "unknown default kernel page size"
#endif
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif /* __KERNEL__ */
-
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
+#endif /* __KERNEL__ */
+
#endif /* _PARISC_PAGE_H */
lc |= lc << 8;
lc |= lc << 16;
+ __asm__ __volatile__ ("sync" : : : "memory");
while(n && !EEH_CHECK_ALIGN(p, 4)) {
*((volatile u8 *)p) = c;
p++;
void *destsave = dest;
unsigned long nsave = n;
+ __asm__ __volatile__ ("sync" : : : "memory");
while(n && (!EEH_CHECK_ALIGN(vsrc, 4) || !EEH_CHECK_ALIGN(dest, 4))) {
*((u8 *)dest) = *((volatile u8 *)vsrc);
__asm__ __volatile__ ("eieio" : : : "memory");
{
void *vdest = (void __force *) dest;
+ __asm__ __volatile__ ("sync" : : : "memory");
while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) {
*((volatile u8 *)vdest) = *((u8 *)src);
src++;
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
- return -ENOSYS;
+ int prev;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ LWSYNC_ON_SMP
+"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\
+ cmpw 0,%0,%3\n\
+ bne- 3f\n"
+ PPC405_ERR77(0,%2)
+"2: stwcx. %4,0,%2\n\
+ bne- 1b\n"
+ ISYNC_ON_SMP
+"3: .section .fixup,\"ax\"\n\
+4: li %0,%5\n\
+ b 3b\n\
+ .previous\n\
+ .section __ex_table,\"a\"\n\
+ .align 3\n\
+ " PPC_LONG "1b,4b,2b,4b\n\
+ .previous" \
+ : "=&r" (prev), "+m" (*uaddr)
+ : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
+ : "cc", "memory");
+
+ return prev;
}
#endif /* __KERNEL__ */
#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/byteorder.h>
+#include <asm/paca.h>
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/iseries_io.h>
#endif
extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
-#define mmiowb()
+static inline void mmiowb(void)
+{
+ __asm__ __volatile__ ("sync" : : : "memory");
+ get_paca()->io_sync = 0;
+}
/*
* output pause versions need a delay at least for the
{
int ret;
- __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
static inline void out_8(volatile unsigned char __iomem *addr, int val)
{
- __asm__ __volatile__("stb%U0%X0 %1,%0; sync"
+ __asm__ __volatile__("sync; stb%U0%X0 %1,%0"
: "=m" (*addr) : "r" (val));
+ get_paca()->io_sync = 1;
}
static inline int in_le16(const volatile unsigned short __iomem *addr)
{
int ret;
- __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; lhbrx %0,0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "r" (addr), "m" (*addr));
return ret;
}
{
int ret;
- __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
static inline void out_le16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sthbrx %1,0,%2; sync"
+ __asm__ __volatile__("sync; sthbrx %1,0,%2"
: "=m" (*addr) : "r" (val), "r" (addr));
+ get_paca()->io_sync = 1;
}
static inline void out_be16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sth%U0%X0 %1,%0; sync"
+ __asm__ __volatile__("sync; sth%U0%X0 %1,%0"
: "=m" (*addr) : "r" (val));
+ get_paca()->io_sync = 1;
}
static inline unsigned in_le32(const volatile unsigned __iomem *addr)
{
unsigned ret;
- __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; lwbrx %0,0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "r" (addr), "m" (*addr));
return ret;
}
{
unsigned ret;
- __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
static inline void out_le32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr)
+ __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr)
: "r" (val), "r" (addr));
+ get_paca()->io_sync = 1;
}
static inline void out_be32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stw%U0%X0 %1,%0; sync"
+ __asm__ __volatile__("sync; stw%U0%X0 %1,%0"
: "=m" (*addr) : "r" (val));
+ get_paca()->io_sync = 1;
}
static inline unsigned long in_le64(const volatile unsigned long __iomem *addr)
unsigned long tmp, ret;
__asm__ __volatile__(
+ "sync\n"
"ld %1,0(%2)\n"
"twi 0,%1,0\n"
"isync\n"
{
unsigned long ret;
- __asm__ __volatile__("ld%U1%X1 %0,%1; twi 0,%0,0; isync"
+ __asm__ __volatile__("sync; ld%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
"rldicl %1,%1,32,0\n"
"rlwimi %0,%1,8,8,31\n"
"rlwimi %0,%1,24,16,23\n"
- "std %0,0(%3)\n"
- "sync"
+ "sync\n"
+ "std %0,0(%3)"
: "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr));
+ get_paca()->io_sync = 1;
}
static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long val)
{
- __asm__ __volatile__("std%U0%X0 %1,%0; sync" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("sync; std%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
+ get_paca()->io_sync = 1;
}
#ifndef CONFIG_PPC_ISERIES
/* How many bytes to reserve at zero for kdump. The reserve limit should
* be greater or equal to the trampoline's end address.
* Reserve to the end of the FWNMI area, see head_64.S */
-#define KDUMP_RESERVE_LIMIT 0x8000
+#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */
#ifdef CONFIG_CRASH_DUMP
u64 saved_r1; /* r1 save for RTAS calls */
u64 saved_msr; /* MSR saved here by enter_rtas */
u8 proc_enabled; /* irq soft-enable flag */
+ u8 io_sync; /* writel() needs spin_unlock sync */
/* Stuff for accurate time accounting */
u64 user_time; /* accumulated usermode TB ticks */
#define LOCK_TOKEN 1
#endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+#define CLEAR_IO_SYNC (get_paca()->io_sync = 0)
+#define SYNC_IO do { \
+ if (unlikely(get_paca()->io_sync)) { \
+ mb(); \
+ get_paca()->io_sync = 0; \
+ } \
+ } while (0)
+#else
+#define CLEAR_IO_SYNC
+#define SYNC_IO
+#endif
+
/*
* This returns the old value in the lock, so we succeeded
* in getting the lock if the return value is 0.
static int __inline__ __raw_spin_trylock(raw_spinlock_t *lock)
{
+ CLEAR_IO_SYNC;
return __spin_trylock(lock) == 0;
}
static void __inline__ __raw_spin_lock(raw_spinlock_t *lock)
{
+ CLEAR_IO_SYNC;
while (1) {
if (likely(__spin_trylock(lock) == 0))
break;
{
unsigned long flags_dis;
+ CLEAR_IO_SYNC;
while (1) {
if (likely(__spin_trylock(lock) == 0))
break;
static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock)
{
+ SYNC_IO;
__asm__ __volatile__("# __raw_spin_unlock\n\t"
LWSYNC_ON_SMP: : :"memory");
lock->slock = 0;
int ret;
__asm__ __volatile__(
- "lbz%U1%X1 %0,%1;\n"
+ "sync; lbz%U1%X1 %0,%1;\n"
"twi 0,%0,0;\n"
"isync" : "=r" (ret) : "m" (*addr));
return ret;
{
int ret;
- __asm__ __volatile__("lhbrx %0,0,%1;\n"
+ __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
"twi 0,%0,0;\n"
"isync" : "=r" (ret) :
"r" (addr), "m" (*addr));
{
int ret;
- __asm__ __volatile__("lhz%U1%X1 %0,%1;\n"
+ __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
"twi 0,%0,0;\n"
"isync" : "=r" (ret) : "m" (*addr));
return ret;
extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
+ __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
"r" (val), "r" (addr));
}
extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
{
unsigned ret;
- __asm__ __volatile__("lwbrx %0,0,%1;\n"
+ __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
"twi 0,%0,0;\n"
"isync" : "=r" (ret) :
"r" (addr), "m" (*addr));
{
unsigned ret;
- __asm__ __volatile__("lwz%U1%X1 %0,%1;\n"
+ __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
"twi 0,%0,0;\n"
"isync" : "=r" (ret) : "m" (*addr));
return ret;
extern inline void out_le32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
+ __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
"r" (val), "r" (addr));
}
extern inline void out_be32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
#if defined (CONFIG_8260_PCI9)
#define readb(addr) in_8((volatile u8 *)(addr))
{ \
unsigned int x; \
__asm__ __volatile__( \
+ "sync\n" \
"0:" op " %0,0,%1\n" \
"1: twi 0,%0,0\n" \
"2: isync\n" \
extern __inline__ void name(unsigned int val, unsigned int port) \
{ \
__asm__ __volatile__( \
+ "sync\n" \
"0:" op " %0,0,%1\n" \
"1: sync\n" \
"2:\n" \
#define DEBUG_H
#include <linux/fs.h>
-#include <linux/string.h>
/* Note:
* struct __debug_entry must be defined outside of #ifdef __KERNEL__
#define __DEBUG_FEATURE_VERSION 2 /* version of debug feature */
#ifdef __KERNEL__
+#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/time.h>
/* Keep this the last entry. */
#define R_390_NUM 61
-/*
- * ELF register definitions..
- */
-
-#include <linux/sched.h> /* for task_struct */
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/system.h> /* for save_access_regs */
-
-
-typedef s390_fp_regs elf_fpregset_t;
-typedef s390_regs elf_gregset_t;
-
/*
* These are used to set parameters in the core dumps.
*/
#define ELF_DATA ELFDATA2MSB
#define ELF_ARCH EM_S390
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef s390_fp_regs elf_fpregset_t;
+typedef s390_regs elf_gregset_t;
+
+#ifdef __KERNEL__
+#include <linux/sched.h> /* for task_struct */
+#include <asm/system.h> /* for save_access_regs */
+
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define ELF_PLATFORM (NULL)
-#ifdef __KERNEL__
#ifndef __s390x__
#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
#else /* __s390x__ */
#include <asm/ptrace.h>
#include <asm/user.h>
-#include <asm/processor.h>
-#include <asm/compat.h>
/* x86-64 relocation types */
#define R_X86_64_NONE 0 /* No reloc */
typedef struct user_i387_struct elf_fpregset_t;
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- ((x)->e_machine == EM_X86_64)
-
/*
* These are used to set parameters in the core dumps.
*/
#define ELF_DATA ELFDATA2LSB
#define ELF_ARCH EM_X86_64
+#ifdef __KERNEL__
+#include <asm/processor.h>
+#include <asm/compat.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ ((x)->e_machine == EM_X86_64)
+
+
/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
contains a pointer to a function which might be registered using `atexit'.
This provides a mean for the dynamic linker to call DT_FINI functions for
/* I'm not sure if we can use '-' here */
#define ELF_PLATFORM ("x86_64")
-#ifdef __KERNEL__
extern void set_personality_64bit(void);
#define SET_PERSONALITY(ex, ibcs2) set_personality_64bit()
/*
#ifndef __ASSEMBLY__
#include <linux/types.h>
-#include <linux/linkage.h>
#include <linux/time.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifdef __KERNEL__
+#include <linux/linkage.h>
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
#define __NR_move_pages 279
__SYSCALL(__NR_move_pages, sys_move_pages)
+#ifdef __KERNEL__
+
#define __NR_syscall_max __NR_move_pages
#ifndef __NO_STUBS
#else /* __KERNEL_SYSCALLS__ */
-#ifdef __KERNEL__
-
#include <linux/syscalls.h>
#include <asm/ptrace.h>
asmlinkage long sys_vfork(struct pt_regs regs);
asmlinkage long sys_pipe(int *fildes);
-#endif /* __KERNEL_SYSCALLS__ */
-
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
struct sigaction __user *oact,
size_t sigsetsize);
-#endif
+#endif /* __ASSEMBLY__ */
-#endif
+#endif /* __KERNEL_SYSCALLS__ */
/*
* "Conditional" syscalls
*/
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
+#endif /* __NO_STUBS */
-#endif
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_64_UNISTD_H_ */
#ifndef _ASM_X86_64_VSYSCALL_H_
#define _ASM_X86_64_VSYSCALL_H_
-#include <linux/seqlock.h>
-
enum vsyscall_num {
__NR_vgettimeofday,
__NR_vtime,
#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
#ifdef __KERNEL__
+#include <linux/seqlock.h>
#define __section_vxtime __attribute__ ((unused, __section__ (".vxtime"), aligned(16)))
#define __section_wall_jiffies __attribute__ ((unused, __section__ (".wall_jiffies"), aligned(16)))
uint8_t TopBottom;
} __attribute__((packed));
+/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
+
+struct cfi_pri_atmel {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint8_t Features;
+ uint8_t BottomBoot;
+ uint8_t BurstMode;
+ uint8_t PageMode;
+} __attribute__((packed));
+
struct cfi_pri_query {
uint8_t NumFields;
uint32_t ProtField[1]; /* Not host ordered */
#define CFI_ID_ANY 0xffff
#define CFI_MFR_AMD 0x0001
+#define CFI_MFR_ATMEL 0x001F
#define CFI_MFR_ST 0x0020 /* STMicroelectronics */
void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
xt_helper.h xt_length.h xt_limit.h xt_mac.h xt_mark.h \
xt_MARK.h xt_multiport.h xt_NFQUEUE.h xt_pkttype.h \
xt_policy.h xt_realm.h xt_sctp.h xt_state.h xt_string.h \
- xt_tcpmss.h xt_tcpudp.h
+ xt_tcpmss.h xt_tcpudp.h xt_SECMARK.h xt_CONNSECMARK.h
unifdef-y := nf_conntrack_common.h nf_conntrack_ftp.h \
nf_conntrack_tcp.h nfnetlink.h x_tables.h xt_physdev.h
#ifndef _LINUX_NFS_FS_H
#define _LINUX_NFS_FS_H
-#include <linux/in.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/rwsem.h>
-#include <linux/wait.h>
-
-#include <linux/sunrpc/debug.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/clnt.h>
-
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-#include <linux/nfs_xdr.h>
-
-#include <linux/nfs_fs_sb.h>
-
-#include <linux/rwsem.h>
-#include <linux/mempool.h>
-
/*
* Enable debugging support for nfs client.
* Requires RPC_DEBUG.
*/
#define NFS_SUPER_MAGIC 0x6969
-/*
- * These are the default flags for swap requests
- */
-#define NFS_RPC_SWAPFLAGS (RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
-
/*
* When flushing a cluster of dirty pages, there can be different
* strategies:
#ifdef __KERNEL__
+#include <linux/in.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <linux/wait.h>
+
+#include <linux/sunrpc/debug.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/clnt.h>
+
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+#include <linux/nfs_xdr.h>
+
+#include <linux/nfs_fs_sb.h>
+
+#include <linux/rwsem.h>
+#include <linux/mempool.h>
+
+/*
+ * These are the default flags for swap requests
+ */
+#define NFS_RPC_SWAPFLAGS (RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
+
/*
* NFSv3/v4 Access mode cache entry
*/
#include <linux/time.h>
#include <asm/param.h>
-#include <asm/timex.h>
/*
* SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
#define TIME_BAD TIME_ERROR /* bw compat */
#ifdef __KERNEL__
+#include <asm/timex.h>
+
/*
* kernel variables
* Note: maximum error = NTP synch distance = dispersion + delay / 2;
Say N if unsure.
-config SYSCTL
- bool "Sysctl support" if EMBEDDED
- default y
- ---help---
- The sysctl interface provides a means of dynamically changing
- certain kernel parameters and variables on the fly without requiring
- a recompile of the kernel or reboot of the system. The primary
- interface consists of a system call, but if you say Y to "/proc
- file system support", a tree of modifiable sysctl entries will be
- generated beneath the /proc/sys directory. They are explained in the
- files in <file:Documentation/sysctl/>. Note that enabling this
- option will enlarge the kernel by at least 8 KB.
-
- As it is generally a good thing, you should say Y here unless
- building a kernel for install/rescue disks or your system is very
- limited in memory.
-
config AUDIT
bool "Auditing support"
depends on NET
source "usr/Kconfig"
-config UID16
- bool "Enable 16-bit UID system calls" if EMBEDDED
- depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
- default y
- help
- This enables the legacy 16-bit UID syscall wrappers.
-
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size (Look out for broken compilers!)"
default y
environments which can tolerate a "non-standard" kernel.
Only use this if you really know what you are doing.
+config UID16
+ bool "Enable 16-bit UID system calls" if EMBEDDED
+ depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
+ default y
+ help
+ This enables the legacy 16-bit UID syscall wrappers.
+
+config SYSCTL
+ bool "Sysctl support" if EMBEDDED
+ default y
+ ---help---
+ The sysctl interface provides a means of dynamically changing
+ certain kernel parameters and variables on the fly without requiring
+ a recompile of the kernel or reboot of the system. The primary
+ interface consists of a system call, but if you say Y to "/proc
+ file system support", a tree of modifiable sysctl entries will be
+ generated beneath the /proc/sys directory. They are explained in the
+ files in <file:Documentation/sysctl/>. Note that enabling this
+ option will enlarge the kernel by at least 8 KB.
+
+ As it is generally a good thing, you should say Y here unless
+ building a kernel for install/rescue disks or your system is very
+ limited in memory.
+
config KALLSYMS
bool "Load all symbols for debugging/kksymoops" if EMBEDDED
default y
kernel data structures. This saves memory on small machines,
but may reduce performance.
-config RT_MUTEXES
- boolean
- select PLIST
-
config FUTEX
bool "Enable futex support" if EMBEDDED
default y
endmenu # General setup
+config RT_MUTEXES
+ boolean
+ select PLIST
+
config TINY_SHMEM
default !SHMEM
bool
mask_ack_irq(desc, irq);
if (unlikely(desc->status & IRQ_INPROGRESS))
- goto out;
+ goto out_unlock;
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
desc->status |= IRQ_PENDING;
- goto out;
+ goto out_unlock;
}
desc->status |= IRQ_INPROGRESS;
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
-out:
if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
desc->chip->unmask(irq);
+out_unlock:
spin_unlock(&desc->lock);
}
desc->chip->enable(irq);
if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
- desc->status &= ~IRQ_PENDING;
- desc->status = status | IRQ_REPLAY;
+ desc->status = (status & ~IRQ_PENDING) | IRQ_REPLAY;
if (!desc->chip || !desc->chip->retrigger ||
!desc->chip->retrigger(irq)) {
{
struct subprocess_info *sub_info = data;
pid_t pid;
+ int wait = sub_info->wait;
/* CLONE_VFORK: wait until the usermode helper has execve'd
* successfully We need the data structures to stay around
* until that is done. */
- if (sub_info->wait)
+ if (wait)
pid = kernel_thread(wait_for_helper, sub_info,
CLONE_FS | CLONE_FILES | SIGCHLD);
else
if (pid < 0) {
sub_info->retval = pid;
complete(sub_info->complete);
- } else if (!sub_info->wait)
+ } else if (!wait)
complete(sub_info->complete);
}
* Stack-trace: tightly packed array of stack backtrace
* addresses. Protected by the hash_lock.
*/
-#define MAX_STACK_TRACE_ENTRIES 131072UL
+#define MAX_STACK_TRACE_ENTRIES 262144UL
extern struct list_head all_lock_classes;
next = rdp->donelist = list->next;
list->func(list);
list = next;
- rdp->qlen--;
if (++count >= rdp->blimit)
break;
}
+
+ local_irq_disable();
+ rdp->qlen -= count;
+ local_irq_enable();
if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
rdp->blimit = blimit;
+
if (!rdp->donelist)
rdp->donetail = &rdp->donelist;
else
config NET_DIVERT
bool "Frame Diverter (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && BROKEN
---help---
The Frame Diverter allows you to divert packets from the
network, that are not aimed at the interface receiving it (in
} else {
unsigned int len = skb->len;
+ skb_get(skb);
clip_push(vcc, skb);
PRIV(skb->dev)->stats.rx_packets--;
PRIV(skb->dev)->stats.rx_bytes -= len;
+ kfree_skb(skb);
}
return 0;
}
buf[1] = 0;
buf[2] = 0;
buf[3] = BPDU_TYPE_TCN;
- br_send_bpdu(p, buf, 7);
+ br_send_bpdu(p, buf, 4);
}
/*
kfree(tbl->phash_buckets);
tbl->phash_buckets = NULL;
+ free_percpu(tbl->stats);
+ tbl->stats = NULL;
+
return 0;
}
struct fib_result *res)
{
int err, i;
- t_key mask;
+ __be32 mask;
struct leaf_info *li;
struct hlist_head *hhead = &l->list;
struct hlist_node *node;
hlist_for_each_entry_rcu(li, node, hhead, hlist) {
i = li->plen;
- mask = ntohl(inet_make_mask(i));
- if (l->key != (key & mask))
+ mask = inet_make_mask(i);
+ if (l->key != (key & ntohl(mask)))
continue;
- if ((err = fib_semantic_match(&li->falh, flp, res, l->key, mask, i)) <= 0) {
+ if ((err = fib_semantic_match(&li->falh, flp, res, htonl(l->key), mask, i)) <= 0) {
*plen = i;
#ifdef CONFIG_IP_FIB_TRIE_STATS
t->stats.semantic_match_passed++;
*/
static int ports[IP_VS_APP_MAX_PORTS] = {21, 0};
module_param_array(ports, int, NULL, 0);
-
-/*
- * Debug level
- */
-#ifdef CONFIG_IP_VS_DEBUG
-static int debug=0;
-module_param(debug, int, 0);
-#endif
+MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands");
/* Dummy variable */
&start, &end) != 1)
return 1;
- IP_VS_DBG(1-debug, "PASV response (%u.%u.%u.%u:%d) -> "
+ IP_VS_DBG(7, "PASV response (%u.%u.%u.%u:%d) -> "
"%u.%u.%u.%u:%d detected\n",
NIPQUAD(from), ntohs(port), NIPQUAD(cp->caddr), 0);
while (data <= data_limit - 6) {
if (strnicmp(data, "PASV\r\n", 6) == 0) {
/* Passive mode on */
- IP_VS_DBG(1-debug, "got PASV at %zd of %zd\n",
+ IP_VS_DBG(7, "got PASV at %zd of %zd\n",
data - data_start,
data_limit - data_start);
cp->app_data = &ip_vs_ftp_pasv;
&start, &end) != 1)
return 1;
- IP_VS_DBG(1-debug, "PORT %u.%u.%u.%u:%d detected\n",
+ IP_VS_DBG(7, "PORT %u.%u.%u.%u:%d detected\n",
NIPQUAD(to), ntohs(port));
/* Passive mode off */
/*
* Now update or create a connection entry for it
*/
- IP_VS_DBG(1-debug, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
+ IP_VS_DBG(7, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
ip_vs_proto_name(iph->protocol),
NIPQUAD(to), ntohs(port), NIPQUAD(cp->vaddr), 0);
for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
if (!ports[i])
continue;
+ if (ports[i] < 0 || ports[i] > 0xffff) {
+ IP_VS_WARNING("ip_vs_ftp: Ignoring invalid "
+ "configuration port[%d] = %d\n",
+ i, ports[i]);
+ continue;
+ }
ret = register_ip_vs_app_inc(app, app->protocol, ports[i]);
if (ret)
break;
- IP_VS_DBG(1-debug, "%s: loaded support on port[%d] = %d\n",
- app->name, i, ports[i]);
+ IP_VS_INFO("%s: loaded support on port[%d] = %d\n",
+ app->name, i, ports[i]);
}
if (ret)
int sysctl_tcp_nometrics_save;
int sysctl_tcp_moderate_rcvbuf = 1;
-int sysctl_tcp_abc = 1;
+int sysctl_tcp_abc;
#define FLAG_DATA 0x01 /* Incoming frame contained data. */
#define FLAG_WIN_UPDATE 0x02 /* Incoming ACK was a window update. */
*
* TCP Low Priority is a distributed algorithm whose goal is to utilize only
* the excess network bandwidth as compared to the ``fair share`` of
- * bandwidth as targeted by TCP. Available from:
- * http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
+ * bandwidth as targeted by TCP.
*
- * Original Author:
- * Aleksandar Kuzmanovic <akuzma@northwestern.edu>
- *
- * See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation.
* As of 2.6.13, Linux supports pluggable congestion control algorithms.
* Due to the limitation of the API, we take the following changes from
* the original TCP-LP implementation:
* o OWD is handled in relative format, where local time stamp will in
* tcp_time_stamp format.
*
- * Port from 2.4.19 to 2.6.16 as module by:
- * Wong Hoi Sing Edison <hswong3i@gmail.com>
- * Hung Hing Lun <hlhung3i@gmail.com>
+ * Original Author:
+ * Aleksandar Kuzmanovic <akuzma@northwestern.edu>
+ * Available from:
+ * http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
+ * Original implementation for 2.4.19:
+ * http://www-ece.rice.edu/networks/TCP-LP/
*
- * Version: $Id: tcp_lp.c,v 1.22 2006-05-02 18:18:19 hswong3i Exp $
+ * 2.6.x module Authors:
+ * Wong Hoi Sing, Edison <hswong3i@gmail.com>
+ * Hung Hing Lun, Mike <hlhung3i@gmail.com>
+ * SourceForge project page:
+ * http://tcp-lp-mod.sourceforge.net/
+ *
+ * Version: $Id: tcp_lp.c,v 1.24 2006/09/05 20:22:53 hswong3i Exp $
*/
#include <linux/config.h>
if (m < 0)
m = -m;
- if (rhz != 0) {
+ if (rhz > 0) {
m -= rhz >> 6; /* m is now error in remote HZ est */
rhz += m; /* 63/64 old + 1/64 new */
} else
rhz = m << 6;
+ out:
/* record time for successful remote HZ calc */
- lp->flag |= LP_VALID_RHZ;
+ if (rhz > 0)
+ lp->flag |= LP_VALID_RHZ;
+ else
+ lp->flag &= ~LP_VALID_RHZ;
- out:
/* record reference time stamp */
lp->remote_ref_time = tp->rx_opt.rcv_tsval;
lp->local_ref_time = tp->rx_opt.rcv_tsecr;
module_init(tcp_lp_register);
module_exit(tcp_lp_unregister);
-MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun");
+MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun Mike");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TCP Low Priority");
}
tc = *(int *)CMSG_DATA(cmsg);
- if (tc < 0 || tc > 0xff)
+ if (tc < -1 || tc > 0xff)
goto exit_f;
err = 0;
if (hlimit < 0)
hlimit = ipv6_get_hoplimit(dst->dev);
- tclass = np->cork.tclass;
+ tclass = np->tclass;
if (tclass < 0)
tclass = 0;
if (hlimit < 0)
hlimit = ipv6_get_hoplimit(dst->dev);
- tclass = np->cork.tclass;
+ tclass = np->tclass;
if (tclass < 0)
tclass = 0;
break;
case IPV6_TCLASS:
- if (val < 0 || val > 0xff)
+ if (val < -1 || val > 0xff)
goto e_inval;
np->tclass = val;
retv = 0;
case IPV6_TCLASS:
val = np->tclass;
+ if (val < 0)
+ val = 0;
break;
case IPV6_RECVTCLASS:
}
if (tclass < 0) {
- tclass = np->cork.tclass;
+ tclass = np->tclass;
if (tclass < 0)
tclass = 0;
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sam Johnston <samj@samj.net>");
+MODULE_ALIAS("ipt_quota");
+MODULE_ALIAS("ip6t_quota");
static DEFINE_SPINLOCK(quota_lock);
if ((int)snaplen < 0)
snaplen = 0;
}
- if (snaplen > skb->len-skb->data_len)
- snaplen = skb->len-skb->data_len;
spin_lock(&sk->sk_receive_queue.lock);
h = (struct tpacket_hdr *)packet_lookup_frame(po, po->head);
status &= ~TP_STATUS_LOSING;
spin_unlock(&sk->sk_receive_queue.lock);
- memcpy((u8*)h + macoff, skb->data, snaplen);
+ skb_copy_bits(skb, 0, (u8*)h + macoff, snaplen);
h->tp_len = skb->len;
h->tp_snaplen = snaplen;
static void dev_watchdog_up(struct net_device *dev)
{
- netif_tx_lock_bh(dev);
__netdev_watchdog_up(dev);
- netif_tx_unlock_bh(dev);
}
static void dev_watchdog_down(struct net_device *dev)
echo "\#ifndef $$STUBDEF" ; \
echo "\#define $$STUBDEF" ; \
echo "\# if $(ARCHDEF)" ; \
-if [ -r $(srctree)/include/$(archasm)/$@ ]; then \
+if [ -r $(INSTALL_HDR_PATH)/include/$(archasm)/$@ ]; then \
echo "\# include <$(archasm)/$@>" ; \
else \
echo "\# error $(archasm)/$@ does not exist in" \
"the $(ARCH) architecture" ; \
fi ; \
echo "\# elif $(ALTARCHDEF)" ; \
-if [ -r $(srctree)/include/$(altarchasm)/$@ ]; then \
+if [ -r $(INSTALL_HDR_PATH)/include/$(altarchasm)/$@ ]; then \
echo "\# include <$(altarchasm)/$@>" ; \
else \
echo "\# error $(altarchasm)/$@ does not exist in" \
hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
.PHONY: altarch-dir
-altarch-dir:
+# All the files in the normal arch dir must be created first, since we test
+# for their existence.
+altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm
# libkconfig.so as the executable conf.
# Note: Shared libraries consisting of C++ files are not supported
-__hostprogs := $(sort $(hostprogs-y)$(hostprogs-m))
+__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
# hostprogs-y := tools/build may have been specified. Retreive directory
host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
#!/bin/sh
-for FILE in `grep '^#include <' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
+for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
if [ ! -r $1/$FILE ]; then
- echo $2 requires $FILE, which does not exist
+ echo $2 requires $FILE, which does not exist in exported headers
exit 1
fi
done
projects / linux-beck.git / commitdiff