James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
James Ketrenos <jketreno@io.(none)>
+<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Jean Tourrilhes <jt@hpl.hp.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Controls the trimming rate in batch mode.
+
+What: /sys/fs/f2fs/<disk>/cp_interval
+Date: October 2015
+Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+ Controls the checkpoint timing.
+
+What: /sys/fs/f2fs/<disk>/ra_nid_pages
+Date: October 2015
+Contact: "Chao Yu" <chao2.yu@samsung.com>
+Description:
+ Controls the count of nid pages to be readaheaded.
--- /dev/null
+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL NEW DEPENDENCIES
+v4.3+ Update is needed for custom .config files to make sure
+ CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+ properly.
+++ /dev/null
-Victor is known as a "digital talking book player" manufactured by
-VisuAide, Inc. to be used by blind people.
-
-For more information related to Victor, see:
-
- http://www.humanware.com/en-usa/products
-
-Of course Victor is using Linux as its main operating system.
-The Victor implementation for Linux is maintained by Nicolas Pitre:
-
- nico@visuaide.com
- nico@fluxnic.net
-
-For any comments, please feel free to contact me through the above
-addresses.
-
Address: sysram_ns_base_addr
Offset Value Purpose
=============================================================================
-0x08 exynos_cpu_resume_ns System suspend
+0x08 exynos_cpu_resume_ns, mcpm_entry_point System suspend
0x0c 0x00000bad (Magic cookie) System suspend
0x1c exynos4_secondary_startup Secondary CPU boot
0x1c + 4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot
Address: pmu_base_addr
Offset Value Purpose
=============================================================================
-0x0908 Non-zero (only Exynos3250) Secondary CPU boot up indicator
+0x0908 Non-zero Secondary CPU boot up indicator
+ on Exynos3250 and Exynos542x
4. Glossary
--- /dev/null
+* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+
+Driver source code path
+ drivers/soc/ti/knav_qmss.c
+ drivers/soc/ti/knav_qmss_acc.c
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+knav qmss driver provides a set of APIs to drivers to open/close qmss queues,
+allocate descriptor pools, map the descriptors, push/pop to queues etc. For
+details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h
+
+DT documentation is available at
+Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
+
+Accumulator QMSS queues using PDSP firmware
+============================================
+The QMSS PDSP firmware support accumulator channel that can monitor a single
+queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the
+driver that interface with the accumulator PDSP. This configures
+accumulator channels defined in DTS (example in DT documentation) to monitor
+1 or 32 queues per channel. More description on the firmware is available in
+CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
+ git://git.ti.com/keystone-rtos/qmss-lld.git
+
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+channels. This firmware is available under ti-keystone folder of
+firmware.git at
+ git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+
+To use copy the firmware image to lib/firmware folder of the initramfs or
+ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin
+in the file system and boot up the kernel. User would see
+
+ "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP"
+
+in the boot up log if loading of firmware to PDSP is successful.
+
+Use of accumulated queues requires the firmware image to be present in the
+file system. The driver doesn't acc queues to the supported queue range if
+PDSP is not running in the SoC. The API call fails if there is a queue open
+request to an acc queue and PDSP is not running. So make sure to copy firmware
+to file system before using these queue types.
located here through iotable_init().
VMALLOC_START is based upon the value
of the high_memory variable, and VMALLOC_END
- is equal to 0xff000000.
+ is equal to 0xff800000.
PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
This maps the platforms RAM, and typically
+ Datasheet
http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
- - Allwinner A13 (sun5i)
+ - Allwinner A13 / R8 (sun5i)
+ Datasheet
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+ User Manual
--------------------------------------------------------------------------------
linux,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format.
--------------------------------------------------------------------------------
-linux,uefi-stub-kern-ver | string | Copy of linux_banner from build.
---------------------------------------------------------------------------------
For verbose debug messages, specify 'uefi_debug' on the kernel command line.
- The flags field (introduced in v3.17) is a little-endian 64-bit field
composed as follows:
Bit 0: Kernel endianness. 1 if BE, 0 if LE.
- Bits 1-63: Reserved.
+ Bit 1-2: Kernel Page size.
+ 0 - Unspecified.
+ 1 - 4K
+ 2 - 16K
+ 3 - 64K
+ Bits 3-63: Reserved.
- When image_size is zero, a bootloader should attempt to keep as much
memory as possible free for use by the kernel immediately after the
the amount of free space and expand the <COW device> before it fills up.
<persistent?> is P (Persistent) or N (Not persistent - will not survive
-after reboot).
-The difference is that for transient snapshots less metadata must be
-saved on disk - they can be kept in memory by the kernel.
+after reboot). O (Overflow) can be added as a persistent store option
+to allow userspace to advertise its support for seeing "Overflow" in the
+snapshot status. So supported store types are "P", "PO" and "N".
+
+The difference between persistent and transient is with transient
+snapshots less metadata must be saved on disk - they can be kept in
+memory by the kernel.
* snapshot-merge <origin> <COW device> <persistent> <chunksize>
Required root node property:
compatible: "amlogic,meson8";
+Boards with the Amlogic Meson8b SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8b";
+
Board compatible values:
- - "geniatech,atv1200"
- - "minix,neo-x8"
+ - "geniatech,atv1200" (Meson6)
+ - "minix,neo-x8" (Meson8)
+ - "tronfy,mxq" (Meson8b)
+ - "hardkernel,odroid-c1" (Meson8b)
--- /dev/null
+APM X-GENE SoC series SCU Registers
+
+This system clock unit contain various register that control block resets,
+clock enable/disables, clock divisors and other deepsleep registers.
+
+Properties:
+ - compatible : should contain two values. First value must be:
+ - "apm,xgene-scu"
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
--- /dev/null
+System Control and Power Interface (SCPI) Message Protocol
+----------------------------------------------------------
+
+Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
+("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
+by Linux to initiate various system control and power operations.
+
+Required properties:
+
+- compatible : should be "arm,scpi"
+- mboxes: List of phandle and mailbox channel specifiers
+ All the channels reserved by remote SCP firmware for use by
+ SCPI message protocol should be specified in any order
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+ processors using these mailboxes for IPC, one for each mailbox
+ SHM can be any memory reserved for the purpose of this communication
+ between the processors.
+
+See Documentation/devicetree/bindings/mailbox/mailbox.txt
+for more details about the generic mailbox controller and
+client driver bindings.
+
+Clock bindings for the clocks based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Container Node
+==============
+Required properties:
+- compatible : should be "arm,scpi-clocks"
+ All the clocks provided by SCP firmware via SCPI message
+ protocol much be listed as sub-nodes under this node.
+
+Sub-nodes
+=========
+Required properties:
+- compatible : shall include one of the following
+ "arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
+ These clocks don't provide an entire range of values between the
+ limits but only discrete points within the range. The firmware
+ provides the mapping for each such operating frequency and the
+ index associated with it. The firmware also manages the
+ voltage scaling appropriately with the clock scaling.
+ "arm,scpi-variable-clocks" - all the clocks that are variable and provide full
+ range within the specified range. The firmware provides the
+ range of values within a specified range.
+
+Other required properties for all clocks(all from common clock binding):
+- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
+- clock-output-names : shall be the corresponding names of the outputs.
+- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
+ node. It can be non linear and hence provide the mapping of identifiers
+ into the clock-output-names array.
+
+SRAM and Shared Memory for SCPI
+-------------------------------
+
+A small area of SRAM is reserved for SCPI communication between application
+processors and SCP.
+
+Required properties:
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
+
+The rest of the properties should follow the generic mmio-sram description
+found in ../../misc/sysram.txt
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
+ shared memory on Juno platforms
+
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "arm,scpi-sensors".
+- #thermal-sensor-cells: should be set to 1. This property follows the
+ thermal device tree bindings[2].
+
+ Valid cell values are raw identifiers (Sensor
+ ID) as used by the firmware. Refer to
+ platform documentation for your
+ implementation for the IDs to use. For Juno
+ R0 and Juno R1 refer to [3].
+
+[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/thermal/thermal.txt
+[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+
+Example:
+
+sram: sram@50000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x50000000 0x0 0x10000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x10000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+};
+
+mailbox: mailbox0@40000000 {
+ ....
+ #mbox-cells = <1>;
+};
+
+scpi_protocol: scpi@2e000000 {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+cpu@0 {
+ ...
+ reg = <0 0>;
+ clocks = <&scpi_dvfs 0>;
+};
+
+hdlcd@7ff60000 {
+ ...
+ reg = <0 0x7ff60000 0 0x1000>;
+ clocks = <&scpi_clk 4>;
+};
+
+thermal-zones {
+ soc_thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ /* sensor ID */
+ thermal-sensors = <&scpi_sensors0 3>;
+ ...
+ };
+};
+
+In the above example, the #clock-cells is set to 1 as required.
+scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
+1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
+and pxlclk1 with 3 and 4 as clock-indices.
+
+The first consumer in the example is cpu@0 and it has '0' as the clock
+specifier which points to the first entry in the output clocks of
+scpi_dvfs i.e. "atlclk".
+
+Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
+clock. '4' in the clock specifier here points to the second entry
+in the output clocks of scpi_clocks i.e. "pxlclk1"
+
+The thermal-sensors property in the soc_thermal node uses the
+temperature sensor provided by SCP firmware to setup a thermal
+zone. The ID "3" is the sensor identifier for the temperature sensor
+as used by the firmware.
- compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
- compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+hif-cpubiuctrl node
+-------------------
+SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
+(BIU) block which controls and interfaces the CPU complex to the different
+Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
+offers a feature called Write Pairing which consists in collapsing two adjacent
+cache lines into a single (bursted) write transaction towards the memory
+controller (MEMC) to maximize write bandwidth.
+
+Required properties:
+
+ - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
+
+Optional properties:
+
+ - brcm,write-pairing:
+ Boolean property, which when present indicates that the chip
+ supports write-pairing.
+
example:
rdb {
#address-cells = <1>;
hif_cpubiuctrl: syscon@3e2400 {
compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
reg = <0x3e2400 0x5b4>;
+ brcm,write-pairing;
};
hif_continuation: syscon@452000 {
};
};
-Lastly, nodes that allow for support of SMP initialization and reboot are
-required:
+Nodes that allow for support of SMP initialization and reboot are required:
smpboot
-------
compatible = "brcm,brcmstb-reboot";
syscon = <&sun_top_ctrl 0x304 0x308>;
};
+
+
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-aon-ctrl"
+- reg : the register start and length for the AON CTRL block
+
+Example:
+
+aon-ctrl@410000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY). See
+the example device tree snippet below.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-memc" and "simple-bus"
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible : should contain one of these
+ "brcm,brcmstb-ddr-phy-v225.1"
+ "brcm,brcmstb-ddr-phy-v240.1"
+ "brcm,brcmstb-ddr-phy-v240.2"
+
+- reg : the DDR PHY register range
+
+== DDR SHIMPHY
+
+Control registers for this memory controller's DDR SHIMPHY.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
+- reg : the DDR SHIMPHY register range
+
+== MEMC DDR control
+
+Sequencer DRAM parameters and control registers. Used for Self-Refresh
+Power-Down (SRPD), among other things.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-memc-ddr"
+- reg : the MEMC DDR register range
+
+Example:
+
+memory_controllers {
+ ranges;
+ compatible = "simple-bus";
+
+ memc@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1106000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1106000 0x21c>;
+ };
+
+ shimphy@f1108000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1108000 0xe4>;
+ };
+
+ memc-ddr@f1102000 {
+ reg = <0xf1102000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+
+ memc@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1186000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1186000 0x21c>;
+ };
+
+ shimphy@f1188000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1188000 0xe4>;
+ };
+
+ memc-ddr@f1182000 {
+ reg = <0xf1182000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+
+ memc@2 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1206000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1206000 0x21c>;
+ };
+
+ shimphy@f1208000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1208000 0xe4>;
+ };
+
+ memc-ddr@f1202000 {
+ reg = <0xf1202000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+};
--- /dev/null
+Broadcom Northstar Plus device tree bindings
+--------------------------------------------
+
+Broadcom Northstar Plus family of SoCs are used for switching control
+and management applications as well as residential router/gateway
+applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+SATA and several other IO controllers.
+
+Boards with Northstar Plus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM58522
+compatible = "brcm,bcm58522", "brcm,nsp";
+
+BCM58525
+compatible = "brcm,bcm58525", "brcm,nsp";
+
+BCM58535
+compatible = "brcm,bcm58535", "brcm,nsp";
+
+BCM58622
+compatible = "brcm,bcm58622", "brcm,nsp";
+
+BCM58623
+compatible = "brcm,bcm58623", "brcm,nsp";
+
+BCM58625
+compatible = "brcm,bcm58625", "brcm,nsp";
+
+BCM88312
+compatible = "brcm,bcm88312", "brcm,nsp";
* For "marvell,armada-380-coherency-fabric", only one pair is needed
for the per-CPU fabric registers.
+Optional properties:
+
+- broken-idle: boolean to set when the Idle mode is not supported by the
+ hardware.
+
Examples:
coherency-fabric@d0020200 {
"marvell,armada-380-smp"
"marvell,armada-390-smp"
"marvell,armada-xp-smp"
+ "mediatek,mt6589-smp"
+ "mediatek,mt81xx-tz-smp"
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
-Freescale LS2085A SoC Device Tree Bindings
-------------------------------------------
+Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
+----------------------------------------------------------------
-LS2085A ARMv8 based Simulator model
+LS2080A ARMv8 based Simulator model
Required root node properties:
- - compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+ - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+LS2080A ARMv8 based QDS Board
+Required root node properties:
+ - compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+LS2080A ARMv8 based RDB Board
+Required root node properties:
+ - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
Required root node properties:
- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+HiP05 D02 Board
+Required root node properties:
+ - compatible = "hisilicon,hip05-d02";
+
Hisilicon system controller
Required properties:
the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
type UART should use the specified compatible for those devices.
+SoC families:
+
+- Keystone 2 generic SoC:
+ compatible = "ti,keystone"
+
+SoCs:
+
+- Keystone 2 Hawking/Kepler
+ compatible = "ti,k2hk", "ti,keystone"
+- Keystone 2 Lamarr
+ compatible = "ti,k2l", "ti,keystone"
+- Keystone 2 Edison
+ compatible = "ti,k2e", "ti,keystone"
+
Boards:
- Keystone 2 Hawking/Kepler EVM
- compatible = "ti,k2hk-evm","ti,keystone"
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
- Keystone 2 Lamarr EVM
- compatible = "ti,k2l-evm","ti,keystone"
+ compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
- Keystone 2 Edison EVM
- compatible = "ti,k2e-evm","ti,keystone"
+ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"
--- /dev/null
+MVEBU CPU Config registers
+--------------------------
+
+MVEBU (Marvell SOCs: Armada 370/XP)
+
+Required properties:
+
+- compatible: one of:
+ - "marvell,armada-370-cpu-config"
+ - "marvell,armada-xp-cpu-config"
+
+- reg: Should contain CPU config registers location and length, in
+ their per-CPU variant
+
+Example:
+
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
Required properties:
- compatible : should be one of
+ "apm,potenza-pmu"
"arm,armv8-pmuv3"
+ "arm.cortex-a57-pmu"
+ "arm.cortex-a53-pmu"
"arm,cortex-a17-pmu"
"arm,cortex-a15-pmu"
"arm,cortex-a12-pmu"
support, but are permitted to be present for compatibility with
existing software when "arm,psci" is later in the compatible list.
+ * "arm,psci-1.0" : for implementations complying to PSCI 1.0. PSCI 1.0 is
+ backward compatible with PSCI 0.2 with minor specification updates,
+ as defined in the PSCI specification[2].
+
- method : The method of calling the PSCI firmware. Permitted
values are:
[1] Kernel documentation - ARM idle states bindings
Documentation/devicetree/bindings/arm/idle-states.txt
+[2] Power State Coordination Interface (PSCI) specification
+ http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Radxa Rock2 Square board:
+ Required root node properties:
+ - compatible = "radxa,rock2-square", "rockchip,rk3288";
+
- Firefly Firefly-RK3288 board:
Required root node properties:
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Jaq (Haier Chromebook 11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jerry (Hisense Chromebook C11 and more):
Required root node properties:
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+++ /dev/null
-* Samsung's Exynos SoC based boards
-
-Required root node properties:
- - compatible = should be one or more of the following.
- - "samsung,monk" - for Exynos3250-based Samsung Simband board.
- - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
- - "samsung,trats" - for Exynos4210-based Tizen Reference board.
- - "samsung,universal_c210" - for Exynos4210-based Samsung board.
- - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
- - "samsung,trats2" - for Exynos4412-based Tizen Reference board.
- - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
- - "samsung,xyref5260" - for Exynos5260-based Samsung board.
- - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- - "samsung,sd5v1" - for Exynos5440-based Samsung board.
- - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
-
-Optional:
- - firmware node, specifying presence and type of secure firmware:
- - compatible: only "samsung,secure-firmware" is currently supported
- - reg: address of non-secure SYSRAM used for communication with firmware
-
- firmware@0203F000 {
- compatible = "samsung,secure-firmware";
- reg = <0x0203F000 0x1000>;
- };
--- /dev/null
+SAMSUNG Exynos SoCs SROM Controller driver.
+
+Required properties:
+- compatible : Should contain "samsung,exynos-srom".
+
+- reg: offset and length of the register set
+
+Example:
+ sromc@12570000 {
+ compatible = "samsung,exynos-srom";
+ reg = <0x12570000 0x10>;
+ };
--- /dev/null
+* Samsung's Exynos SoC based boards
+
+Required root node properties:
+ - compatible = should be one or more of the following.
+ - "samsung,monk" - for Exynos3250-based Samsung Simband board.
+ - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
+ - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
+ - "samsung,trats" - for Exynos4210-based Tizen Reference board.
+ - "samsung,universal_c210" - for Exynos4210-based Samsung board.
+ - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
+ - "samsung,trats2" - for Exynos4412-based Tizen Reference board.
+ - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
+ - "samsung,xyref5260" - for Exynos5260-based Samsung board.
+ - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
+ - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
+ - "samsung,sd5v1" - for Exynos5440-based Samsung board.
+ - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
+
+* Other companies Exynos SoC based
+ * FriendlyARM
+ - "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM
+ TINY4412 board.
+
+ * Google
+ - "google,pi" - for Exynos5800-based Google Peach Pi
+ Rev 10+ board,
+ also: "google,pi-rev16", "google,pi-rev15", "google,pi-rev14",
+ "google,pi-rev13", "google,pi-rev12", "google,pi-rev11",
+ "google,pi-rev10", "google,peach".
+
+ - "google,pit" - for Exynos5420-based Google Peach Pit
+ Rev 6+ (Exynos5420),
+ also: "google,pit-rev16", "google,pit-rev15", "google,pit-rev14",
+ "google,pit-rev13", "google,pit-rev12", "google,pit-rev11",
+ "google,pit-rev10", "google,pit-rev9", "google,pit-rev8",
+ "google,pit-rev7", "google,pit-rev6", "google,peach".
+
+ - "google,snow-rev4" - for Exynos5250-based Google Snow board,
+ also: "google,snow"
+ - "google,snow-rev5" - for Exynos5250-based Google Snow
+ Rev 5+ board.
+ - "google,spring" - for Exynos5250-based Google Spring board.
+
+ * Hardkernel
+ - "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3.
+ - "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X.
+ - "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2.
+ - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
+ - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
+ Odroid XU3 Lite board.
+ - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4.
+
+ * Insignal
+ - "insignal,arndale" - for Exynos5250-based Insignal Arndale board.
+ - "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
+ Octa board.
+ - "insignal,origen" - for Exynos4210-based Insignal Origen board.
+ - "insignal,origen4412 - for Exynos4412-based Insignal Origen board.
+
+
+Optional nodes:
+ - firmware node, specifying presence and type of secure firmware:
+ - compatible: only "samsung,secure-firmware" is currently supported
+ - reg: address of non-secure SYSRAM used for communication with firmware
+
+ firmware@0203F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0203F000 0x1000>;
+ };
compatible = "renesas,armadillo800eva"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- - BOCK-W - Reference Device Tree Implementation
- compatible = "renesas,bockw-reference", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,lager", "renesas,r8a7790"
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
-
-Note: Reference Device Tree Implementations are temporary implementations
- to ease the migration from platform devices to Device Tree, and are
- intended to be removed in the future.
+ - Porter (M2-LCDP)
+ compatible = "renesas,porter", "renesas,r8a7791"
+ - SILK (RTP0RC7794LCB00011S)
+ compatible = "renesas,silk", "renesas,r8a7794"
allwinner,sun4i-a10
allwinner,sun5i-a10s
allwinner,sun5i-a13
+ allwinner,sun5i-r8
allwinner,sun6i-a31
allwinner,sun7i-a20
allwinner,sun8i-a23
- reg : Specify the base address and the size of the TWD timer
register window.
+Optional
+
+- always-on : a boolean property. If present, the timer is powered through
+ an always-on power domain, therefore it never loses context.
+
Example:
twd-timer@2c000600 {
--- /dev/null
+UniPhier outer cache controller
+
+UniPhier SoCs are integrated with a full-custom outer cache controller system.
+All of them have a level 2 cache controller, and some have a level 3 cache
+controller as well.
+
+Required properties:
+- compatible: should be "socionext,uniphier-system-cache"
+- reg: offsets and lengths of the register sets for the device. It should
+ contain 3 regions: control register, revision register, operation register,
+ in this order.
+- cache-unified: specifies the cache is a unified cache.
+- cache-size: specifies the size in bytes of the cache
+- cache-sets: specifies the number of associativity sets of the cache
+- cache-line-size: specifies the line size in bytes
+- cache-level: specifies the level in the cache hierarchy. The value should
+ be 2 for L2 cache, 3 for L3 cache, etc.
+
+Optional properties:
+- next-level-cache: phandle to the next level cache if present. The next level
+ cache should be also compatible with "socionext,uniphier-system-cache".
+
+The L2 cache must exist to use the L3 cache; the cache hierarchy must be
+indicated correctly with "next-level-cache" properties.
+
+Example 1 (system with L2):
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ cache-unified;
+ cache-size = <0x80000>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+Example 2 (system with L2 and L3):
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+ <0x506c0000 0x400>;
+ cache-unified;
+ cache-size = <0x200000>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+ <0x506c8000 0x400>;
+ cache-unified;
+ cache-size = <0x400000>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
This is the memory-mapped registers for on board FPGA.
-Required properities:
+Required properties:
- compatible: should be a board-specific string followed by a string
indicating the type of FPGA. Example:
- "fsl,<board>-fpga", "fsl,fpga-pixis"
+ "fsl,<board>-fpga", "fsl,fpga-pixis", or
+ "fsl,<board>-fpga", "fsl,fpga-qixis"
- reg: should contain the address and the length of the FPGA register set.
+
+Optional properties:
- interrupt-parent: should specify phandle for the interrupt controller.
- interrupts: should specify event (wakeup) IRQ.
interrupts = <8 8 0 0>;
};
+Example (LS2080A-RDB):
+
+ cpld@3,0 {
+ compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0 0x10000>;
+ };
+
* Freescale BCSR GPIO banks
Some BCSR registers act as simple GPIO controllers, each such
--- /dev/null
+Allwinner Reduced Serial Bus (RSB) controller
+
+The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire
+serial bus with 1 master and up to 15 slaves. It is represented by a node
+for the controller itself, and child nodes representing the slave devices.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the controller.
+ - compatible : Shall be "allwinner,sun8i-a23-rsb".
+ - interrupts : The interrupt line associated to the RSB controller.
+ - clocks : The gate clk associated to the RSB controller.
+ - resets : The reset line associated to the RSB controller.
+ - #address-cells : shall be 1
+ - #size-cells : shall be 0
+
+Optional properties :
+
+ - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz.
+ If not set this defaults to 3MHz.
+
+Child nodes:
+
+An RSB controller node can contain zero or more child nodes representing
+slave devices on the bus. Child 'reg' properties should contain the slave
+device's hardware address. The hardware address is hardwired in the device,
+which can normally be found in the datasheet.
+
+Example:
+
+ rsb@01f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <0 39 4>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3e3 {
+ compatible = "...";
+ reg = <0x3e3>;
+
+ /* ... */
+ };
+ };
on PowerPC "stdout" if "stdout-path" is not found. However, the
"linux,stdout-path" and "stdout" properties are deprecated. New platforms
should only use the "stdout-path" property.
+
+linux,booted-from-kexec
+-----------------------
+
+This property is set (currently only on PowerPC, and only needed on
+book3e) by some versions of kexec-tools to tell the new kernel that it
+is being booted by kexec, as the booting environment may differ (e.g.
+a different secondary CPU release mechanism)
--- /dev/null
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835. There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels. Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-cprman"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The external oscillator clock phandle
+
+Example:
+
+ clk_osc: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
+ };
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
* Clock Block on Freescale QorIQ Platforms
-Freescale qoriq chips take primary clocking input from the external
+Freescale QorIQ chips take primary clocking input from the external
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
multiple phase locked loops (PLL) to create a variety of frequencies
which can then be passed to a variety of internal logic, including
Chassis Version Example Chips
--------------- -------------
1.0 p4080, p5020, p5040
-2.0 t4240, b4860, t1040
+2.0 t4240, b4860
1. Clock Block Binding
Required properties:
-- compatible: Should contain a specific clock block compatible string
- and a single chassis clock compatible string.
- Clock block strings include, but not limited to, one of the:
+- compatible: Should contain a chip-specific clock block compatible
+ string and (if applicable) may contain a chassis-version clock
+ compatible string.
+
+ Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
* "fsl,p2041-clockgen"
* "fsl,p3041-clockgen"
* "fsl,p4080-clockgen"
* "fsl,b4420-clockgen"
* "fsl,b4860-clockgen"
* "fsl,ls1021a-clockgen"
- Chassis clock strings include:
+ Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
- reg: Describes the address of the device's resources within the
address space defined by its parent bus, and resource zero
represents the clock register set
-- clock-frequency: Input system clock frequency
-Recommended properties:
+Optional properties:
- ranges: Allows valid translation between child's address space and
parent's. Must be present if the device has sub-nodes.
- #address-cells: Specifies the number of cells used to represent
- #size-cells: Specifies the number of cells used to represent
the size of an address. Must be present if the device has
sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+ as an input clock. Either clock-frequency or clocks must be
+ provided.
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+ Type# Name Index Cell
+ 0 sysclk must be 0
+ 1 cmux index (n in CLKCnCSR)
+ 2 hwaccel index (n in CLKCGnHWACSR)
+ 3 fman 0 for fm1, 1 for fm2
+ 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+
+3. Example
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ clock-frequency = <133333333>;
+ reg = <0xe1000 0x1000>;
+ #clock-cells = <2>;
+ };
+
+ fman@400000 {
+ ...
+ clocks = <&clockgen 3 0>;
+ ...
+ };
+}
+4. Legacy Child Nodes
-2. Clock Provider/Consumer Binding
+NOTE: These nodes are deprecated. Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
Most of the bindings are from the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
- reg: Should be the offset and length of clock block base address.
The length should be 4.
-Example for clock block and clock provider:
+Legacy Example:
/ {
clockgen: global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
};
};
-Example for clock consumer:
+Example for legacy clock consumer:
/ {
cpu0: PowerPC,e5500@0 {
--- /dev/null
+QCOM Secure Channel Manager (SCM)
+
+Qualcomm processors include an interface to communicate to the secure firmware.
+This interface allows for clients to request different types of actions. These
+can include CPU power up/down, HDCP requests, loading of firmware, and other
+assorted actions.
+
+Required properties:
+- compatible: must contain "qcom,scm"
+- clocks: Should contain the core, iface, and bus clocks.
+- clock-names: Must contain "core" for the core clock, "iface" for the interface
+ clock and "bus" for the bus clock.
+
+Example:
+
+ firmware {
+ compatible = "simple-bus";
+
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
-* Freescale MPC512x/MPC8xxx GPIO controller
+* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller
Required properties:
- compatible : Should be "fsl,<soc>-gpio"
The following <soc>s are known to be supported:
- mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq
+ mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq.
- reg : Address and length of the register set for the device
- interrupts : Should be the port interrupt shared by all 32 pins.
- #gpio-cells : Should be two. The first cell is the pin number and
Required properties:
- compatible : "pwm-fan"
- pwms : the PWM that is used to control the PWM fan
+- cooling-levels : PWM duty cycle values in a range from 0 to 255
+ which correspond to thermal cooling states
Example:
- pwm-fan {
+ fan0: pwm-fan {
compatible = "pwm-fan";
- status = "okay";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
pwms = <&pwm 0 10000 0>;
+ cooling-levels = <0 102 170 230>;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ thermal-sensors = <&tmu 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 0 1>;
+ };
+ };
+ };
- clocks: Required if the System MMU is needed to gate its clock.
- power-domains: Required if the System MMU is needed to gate its power.
Please refer to the following document:
- Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+ Documentation/devicetree/bindings/power/pd-samsung.txt
Examples:
gsc_0: gsc@13e00000 {
-* Device tree bindings for ARM PL172 MultiPort Memory Controller
+* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
Required properties:
-- compatible: "arm,pl172", "arm,primecell"
+- compatible: Must be "arm,primecell" and exactly one from
+ "arm,pl172", "arm,pl175" or "arm,pl176".
- reg: Must contains offset/length value for controller.
- mpmc,extended-wait: Enable extended wait.
-- mpmc,buffer-enable: Enable write buffer.
+- mpmc,buffer-enable: Enable write buffer, option is not supported by
+ PL175 and PL176 controllers.
- mpmc,write-protect: Enable write protect.
Optional properties:
- interrupts: Must contain a list of interrupt specifiers for memory
controller interrupts, if available.
- - interrupts-names: Must contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Valid interrupt names are:
+ - interrupt-names: Must contain a list of interrupt names corresponding to
+ the interrupts in the interrupts property, if available.
+ Valid interrupt names are:
- "sec" (secure interrupt)
- "temp" (normal (temperature) interrupt)
- power-domains: Must contain a reference to the PM domain that the memory
- interrupt-parent: Specifies the phandle of the interrupt controller to which
the interrupts from s2mps11 are delivered to.
- interrupts: Interrupt specifiers for interrupt sources.
+- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+ connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+ register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+ when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
Optional nodes:
- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
+- phy-handle : See ethernet.txt file in the same directory
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
--- /dev/null
+* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+Required properties:
+- compatible: Should contain "maxim,ds26522".
+- reg: SPI CS.
+- spi-max-frequency: SPI clock.
+
+Example:
+ slic@1 {
+ compatible = "maxim,ds26522";
+ reg = <1>;
+ spi-max-frequency = <2000000>; /* input clock */
+ };
--- /dev/null
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- smsc,disable-energy-detect:
+ If set, do not enable energy detect mode for the SMSC phy.
+ default: enable energy detect mode
+
+Examples:
+smsc phy with disabled energy detect mode on an am335x based board.
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
--- /dev/null
+* ARM Juno R1 PCIe interface
+
+This PCIe host controller is based on PLDA XpressRICH3-AXI IP
+and thus inherits all the common properties defined in plda,xpressrich3-axi.txt
+as well as the base properties defined in host-generic-pci.txt.
+
+Required properties:
+ - compatible: "arm,juno-r1-pcie"
+ - dma-coherent: The host controller bridges the AXI transactions into PCIe bus
+ in a manner that makes the DMA operations to appear coherent to the CPUs.
--- /dev/null
+* PLDA XpressRICH3-AXI host controller
+
+The PLDA XpressRICH3-AXI host controller can be configured in a manner that
+makes it compliant with the SBSA[1] standard published by ARM Ltd. For those
+scenarios, the host-generic-pci.txt bindings apply with the following additions
+to the compatible property:
+
+Required properties:
+ - compatible: should contain "plda,xpressrich3-axi" to identify the IP used.
+
+
+[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
- <&clock CLK_MOUT_USER_ACLK333>;
- clock-names = "oscclk", "pclk0", "clk0";
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
+ clock-names = "oscclk", "clk0";
#power-domain-cells = <0>;
};
--- /dev/null
+Qualcomm Switch-Mode Battery Charger and Boost
+
+PROPERTIES
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Description: Must be one of:
+ - "qcom,pm8941-charger"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Description: Base address of registers for SMBB block
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Description: The format of the specifier is defined by the binding document
+ describing the node's interrupt parent. Must contain one
+ specifier for each of the following interrupts, in order:
+ - charge done
+ - charge fast mode
+ - charge trickle mode
+ - battery temperature ok
+ - battery present
+ - charger disconnected
+ - USB-in valid
+ - DC-in valid
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Description: Must contain the following list, strictly ordered:
+ "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid"
+
+- qcom,fast-charge-current-limit:
+ Usage: optional (default: 1A, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 3A]
+ Description: Maximum charge current; May be clamped to safety limits.
+
+- qcom,fast-charge-low-threshold-voltage:
+ Usage: optional (default: 3.2V, or pre-configured value)
+ Value type: <u32>; uV; range [2.1V : 3.6V]
+ Description: Battery voltage limit above which fast charging may operate;
+ Below this value linear or switch-mode auto-trickle-charging
+ will operate.
+
+- qcom,fast-charge-high-threshold-voltage:
+ Usage: optional (default: 4.2V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Battery voltage limit below which fast charging may operate;
+ The fast charger will attempt to charge the battery to this
+ voltage. May be clamped to safety limits.
+
+- qcom,fast-charge-safe-voltage:
+ Usage: optional (default: 4.2V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Maximum safe battery voltage; May be pre-set by bootloader, in
+ which case, setting this will harmlessly fail. The property
+ 'fast-charge-high-watermark' will be clamped by this value.
+
+- qcom,fast-charge-safe-current:
+ Usage: optional (default: 1A, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 3A]
+ Description: Maximum safe battery charge current; May pre-set by bootloader,
+ in which case, setting this will harmlessly fail. The property
+ 'qcom,fast-charge-current-limit' will be clamped by this value.
+
+- qcom,auto-recharge-threshold-voltage:
+ Usage: optional (default: 4.1V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Battery voltage limit below which auto-recharge functionality
+ will restart charging after end-of-charge; The high cutoff
+ limit for auto-recharge is 5% above this value.
+
+- qcom,minimum-input-voltage:
+ Usage: optional (default: 4.3V, or pre-configured value)
+ Value type: <u32>; uV; range [4.2V : 9.6V]
+ Description: Input voltage level above which charging may operate
+
+- qcom,dc-current-limit:
+ Usage: optional (default: 100mA, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 2.5A]
+ Description: Default DC charge current limit
+
+- qcom,disable-dc:
+ Usage: optional (default: false)
+ Value type: boolean: <u32> or <empty>
+ Description: Disable DC charger
+
+- qcom,jeita-extended-temp-range:
+ Usage: optional (default: false)
+ Value type: boolean: <u32> or <empty>
+ Description: Enable JEITA extended temperature range; This does *not*
+ adjust the maximum charge voltage or current in the extended
+ temperature range. It only allows charging when the battery
+ is in the extended temperature range. Voltage/current
+ regulation must be done externally to fully comply with
+ the JEITA safety guidelines if this flag is set.
+
+EXAMPLE
+charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000 0x700>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+
+ qcom,fast-charge-current-limit = <1000000>;
+ qcom,dc-charge-current-limit = <1000000>;
+};
--- /dev/null
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+ interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+ dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+ sclpc@10100 {
+ compatible = "fsl,mpc512x-lpbfifo";
+ reg = <0x10100 0x50>;
+ interrupts = <7 0x8>;
+ dmas = <&dma0 26>;
+ dma-names = "rx-tx";
+ };
+
- reg: Address range of the SCPSYS unit
- infracfg: must contain a phandle to the infracfg controller
- clock, clock-names: clocks according to the common clock binding.
- The clocks needed "mm" and "mfg". These are the
- clocks which hardware needs to be enabled before
- enabling certain power domains.
+ The clocks needed "mm", "mfg", "venc" and "venc_lt".
+ These are the clocks which hardware needs to be enabled
+ before enabling certain power domains.
Example:
infracfg = <&infracfg>;
clocks = <&clk26m>,
<&topckgen CLK_TOP_MM_SEL>;
- clock-names = "mfg", "mm";
+ <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mfg", "mm", "venc", "venc_lt";
};
Example consumer:
--- /dev/null
+Qualcomm Shared Memory Manager binding
+
+This binding describes the Qualcomm Shared Memory Manager, used to share data
+between various subsystems and OSes in Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "qcom,smem"
+
+- memory-region:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to memory reservation for main SMEM memory region.
+
+- qcom,rpm-msg-ram:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to RPM message memory resource
+
+- hwlocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a hwspinlock used to protect allocations from
+ the shared memory
+
+= EXAMPLE
+The following example shows the SMEM setup for MSM8974, with a main SMEM region
+at 0xfa00000 and the RPM message ram at 0xfc428000:
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
+ smem@fa00000 {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc {
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+ };
--- /dev/null
+* Rockchip Power Domains
+
+Rockchip processors include support for multiple power domains which can be
+powered up/down by software based on different application scenes to save power.
+
+Required properties for power domain controller:
+- compatible: Should be one of the following.
+ "rockchip,rk3288-power-controller" - for RK3288 SoCs.
+- #power-domain-cells: Number of cells in a power-domain specifier.
+ Should be 1 for multiple PM domains.
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+ "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+- clocks (optional): phandles to clocks which need to be enabled while power domain
+ switches state.
+
+Example:
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
+
+Node of a device using power domains must have a power-domains property,
+containing a phandle to the power device node and an index specifying which
+power domain to use.
+The index should use macros in:
+ "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ power-domains = <&power RK3288_PD_GPU>;
+ /* ... */
+ };
#size-cells = <1>;
ranges;
pdsp0@0x2a10000 {
- firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw";
reg = <0x2a10000 0x1000>,
<0x2a0f000 0x100>,
<0x2a0c000 0x3c8>,
Required properties:
- compatible should contain:
- * "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
- * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
- MT6577)
+ * "mediatek,mt6589-timer" for MT6589 compatible timers
+ * "mediatek,mt8127-timer" for MT8127 compatible timers
+ * "mediatek,mt8135-timer" for MT8135 compatible timers
+ * "mediatek,mt8173-timer" for MT8173 compatible timers
+ * "mediatek,mt6577-timer" for MT6577 and all above compatible timers
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.
synopsys DWC3 CORE
-DWC3- USB3 CONTROLLER
+DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties
+ as described in 'usb/generic.txt'
Required properties:
- compatible: must be "snps,dwc3"
- "renesas,usbhs-r8a7790"
- "renesas,usbhs-r8a7791"
- "renesas,usbhs-r8a7794"
+ - "renesas,usbhs-r8a7795"
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
+boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
calxeda Calxeda
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
+plda PLDA
pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
+tronfy Tronfy
truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
| alpha: | TODO |
| arc: | TODO |
| arm: | TODO |
- | arm64: | TODO |
+ | arm64: | ok |
| avr32: | TODO |
| blackfin: | TODO |
| c6x: | TODO |
| arch |status|
-----------------------
| alpha: | TODO |
- | arc: | .. |
+ | arc: | ok |
| arm: | ok |
| arm64: | ok |
| avr32: | .. |
| arch |status|
-----------------------
| alpha: | TODO |
- | arc: | TODO |
+ | arc: | ok |
| arm: | ok |
| arm64: | ok |
| avr32: | TODO |
collection, triggered in background when I/O subsystem is
idle. If background_gc=on, it will turn on the garbage
collection and if background_gc=off, garbage collection
- will be truned off.
+ will be truned off. If background_gc=sync, it will turn
+ on synchronous garbage collection running in background.
Default value for this option is on. So garbage
collection is on by default.
disable_roll_forward Disable the roll-forward recovery routine
internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h)
has two main (internal) locks:
- 1. A spinlock (gl_spin) which protects the internal state such
+ 1. A spinlock (gl_lockref.lock) which protects the internal state such
as gl_state, gl_target and the list of holders (gl_holders)
2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other
threads from making calls to the DLM, etc. at the same time. If a
Locking rules for glock operations:
-Operation | GLF_LOCK bit lock held | gl_spin spinlock held
------------------------------------------------------------------
+Operation | GLF_LOCK bit lock held | gl_lockref.lock spinlock held
+-------------------------------------------------------------------------
go_xmote_th | Yes | No
go_xmote_bh | Yes | No
go_inval | Yes | No
--- /dev/null
+Kernel driver scpi-hwmon
+========================
+
+Supported chips:
+ * Chips based on ARM System Control Processor Interface
+ Addresses scanned: -
+ Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html
+
+Author: Punit Agrawal <punit.agrawal@arm.com>
+
+Description
+-----------
+
+This driver supports hardware monitoring for SoC's based on the ARM
+System Control Processor (SCP) implementing the System Control
+Processor Interface (SCPI). The following sensor types are supported
+by the SCP -
+
+ * temperature
+ * voltage
+ * current
+ * power
+
+The SCP interface provides an API to query the available sensors and
+their values which are then exported to userspace by this driver.
+
+Usage Notes
+-----------
+
+The driver relies on device tree node to indicate the presence of SCPI
+support in the kernel. See
+Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the
+devicetree node.
\ No newline at end of file
found in include/linux/spi/pxa2xx_spi.h:
struct pxa2xx_spi_master {
- u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
};
-The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
-corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
-the "PXA2xx Developer Manual" section "Clocks and Power Management".
-
The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
slave device (chips) attached to this SPI master.
};
static struct pxa2xx_spi_master pxa_nssp_master_info = {
- .clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
.enable_dma = 1, /* Enables NSSP DMA */
};
F: drivers/net/appletalk/
F: net/appletalk/
+APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
+M: Duc Dang <dhdang@apm.com>
+S: Supported
+F: arch/arm64/boot/dts/apm/
+
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
ARM PMU PROFILING AND DEBUGGING
M: Will Deacon <will.deacon@arm.com>
+R: Mark Rutland <mark.rutland@arm.com>
S: Maintained
-F: arch/arm/kernel/perf_*
+F: arch/arm*/kernel/perf_*
F: arch/arm/oprofile/common.c
-F: arch/arm/kernel/hw_breakpoint.c
-F: arch/arm/include/asm/hw_breakpoint.h
-F: arch/arm/include/asm/perf_event.h
+F: arch/arm*/kernel/hw_breakpoint.c
+F: arch/arm*/include/asm/hw_breakpoint.h
+F: arch/arm*/include/asm/perf_event.h
F: drivers/perf/arm_pmu.c
F: include/linux/perf/arm_pmu.h
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
+M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-N: sun[x4567]i
+N: sun[x456789]i
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: arch/arm/mach-alpine/
-ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
+ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
M: Joachim Eastwood <manabian@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/lpc43*
+F: drivers/clk/nxp/clk-lpc18xx*
+F: drivers/clocksource/time-lpc32xx.c
+F: drivers/i2c/busses/i2c-lpc2k.c
+F: drivers/memory/pl172.c
+F: drivers/mtd/spi-nor/nxp-spifi.c
+F: drivers/rtc/rtc-lpc24xx.c
N: lpc18xx
ARM/MAGICIAN MACHINE SUPPORT
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: drivers/spi/spi-s3c*
+F: drivers/soc/samsung/*
F: sound/soc/samsung/*
+F: Documentation/arm/Samsung/
+F: Documentation/devicetree/bindings/arm/samsung/
+F: Documentation/devicetree/bindings/sram/samsung-sram.txt
+F: Documentation/devicetree/bindings/power/pd-samsung.txt
N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
-F: arch/arm/configs/bockw_defconfig
-F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/uniphier*
+F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
+F: arch/arm/mm/cache-uniphier.c
F: drivers/pinctrl/uniphier/
F: drivers/tty/serial/8250/8250_uniphier.c
N: uniphier
S: Supported
F: drivers/scsi/bnx2i/
-BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
+M: Jon Mason <jonmason@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
+N: nsp
N: bcm9113*
N: bcm9583*
-N: bcm583*
+N: bcm9585*
+N: bcm9586*
+N: bcm988312
N: bcm113*
+N: bcm583*
+N: bcm585*
+N: bcm586*
+N: bcm88312
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
F: include/drm/i915*
F: include/uapi/drm/i915*
+DRM DRIVERS FOR ATMEL HLCDC
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/atmel-hlcdc/
+F: Documentation/devicetree/bindings/drm/atmel/
+
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
M: Joonyoung Shim <jy0922.shim@samsung.com>
F: drivers/gpu/drm/imx/
F: Documentation/devicetree/bindings/drm/imx/
+DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
+M: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://github.com/patjak/drm-gma500
+S: Maintained
+F: drivers/gpu/drm/gma500
+F: include/drm/gma500*
+
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
M: Terje Bergström <tbergstrom@nvidia.com>
F: sound/usb/misc/ua101.c
EXTENSIBLE FIRMWARE INTERFACE (EFI)
-M: Matt Fleming <matt.fleming@intel.com>
+M: Matt Fleming <matt@codeblueprint.co.uk>
L: linux-efi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
M: Jeremy Kerr <jk@ozlabs.org>
-M: Matt Fleming <matt.fleming@intel.com>
+M: Matt Fleming <matt@codeblueprint.co.uk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
L: linux-efi@vger.kernel.org
S: Maintained
S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
+FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
+M: Claudiu Manoil <claudiu.manoil@freescale.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/freescale/gianfar*
+X: drivers/net/ethernet/freescale/gianfar_ptp.c
+F: Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
-M: Ido Shamay <idos@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
+SYNOPSYS DESIGNWARE I2C DRIVER
+M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-designware-*
+F: include/linux/platform_data/i2c-designware.h
+
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Supported
F: arch/score/
+SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+M: Sudeep Holla <sudeep.holla@arm.com>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/arm/arm,scpi.txt
+F: drivers/clk/clk-scpi.c
+F: drivers/cpufreq/scpi-cpufreq.c
+F: drivers/firmware/arm_scpi.c
+F: include/linux/scpi_protocol.h
+
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
F: drivers/staging/lustre
STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
-M: Julian Andres Klode <jak@jak-linux.org>
M: Marc Dietrich <marvin24@gmx.de>
L: ac100@lists.launchpad.net (moderated for non-subscribers)
L: linux-tegra@vger.kernel.org
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
+L: linux-snps-arc@lists.infraded.org
S: Supported
F: arch/arc/
F: Documentation/devicetree/bindings/arc/*
S: Maintained
F: drivers/net/wireless/wl3501*
-WM97XX TOUCHSCREEN DRIVERS
-M: Mark Brown <broonie@kernel.org>
-M: Liam Girdwood <lrg@slimlogic.co.uk>
-L: linux-input@vger.kernel.org
-W: https://github.com/CirrusLogic/linux-drivers/wiki
-S: Supported
-F: drivers/input/touchscreen/*wm97*
-F: include/linux/wm97xx.h
-
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
T: git https://github.com/CirrusLogic/linux-drivers.git
ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/zsmalloc.c
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Hurr durr I'ma sheep
+EXTRAVERSION = -rc7
+NAME = Blurry Fish Butt
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
config HAVE_LATENCYTOP_SUPPORT
def_bool y
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ def_bool y
+ depends on ARC_MMU_V4
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
range 2 4096
default "4"
+config ARC_SMP_HALT_ON_RESET
+ bool "Enable Halt-on-reset boot mode"
+ default y if ARC_UBOOT_SUPPORT
+ help
+ In SMP configuration cores can be configured as Halt-on-reset
+ or they could all start at same time. For Halt-on-reset, non
+ masters are parked until Master kicks them so they can start of
+ at designated entry point. For other case, all jump to common
+ entry point and spin wait for Master's signal.
+
endif #SMP
menuconfig ARC_CACHE
default ARC_MMU_V2 if ARC_CPU_750D
default ARC_MMU_V4 if ARC_CPU_HS
+if ISA_ARCOMPACT
+
config ARC_MMU_V1
bool "MMU v1"
help
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
+endif
+
config ARC_MMU_V4
bool "MMU v4"
depends on ISA_ARCV2
Linux needs to be scooted a bit.
If you don't know what the above means, leave this setting alone.
+config HIGHMEM
+ bool "High Memory Support"
+ help
+ With ARC 2G:2G address split, only upper 2G is directly addressable by
+ kernel. Enable this to potentially allow access to rest of 2G and PAE
+ in future
+
+config ARC_HAS_PAE40
+ bool "Support for the 40-bit Physical Address Extension"
+ default n
+ depends on ISA_ARCV2
+ select HIGHMEM
+ help
+ Enable access to physical memory beyond 4G, only supported on
+ ARC cores with 40 bit Physical Addressing support
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool ARC_HAS_PAE40
+
+config ARCH_DMA_ADDR_T_64BIT
+ bool
+
config ARC_CURR_IN_REG
bool "Dedicate Register r25 for current_task pointer"
default y
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512MiB */
+ reg = <0x80000000 0x20000000>; /* 512MiB */
};
};
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512MiB */
+ reg = <0x80000000 0x20000000>; /* 512MiB */
};
};
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512MiB */
+ reg = <0x80000000 0x20000000>; /* 512MiB */
};
};
/ {
compatible = "snps,nsim_hs";
+ #address-cells = <2>;
+ #size-cells = <2>;
interrupt-parent = <&core_intc>;
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */
+ 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */
+ };
+
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
#address-cells = <1>;
#size-cells = <1>;
- /* child and parent address space 1:1 mapped */
- ranges;
+ /* only perip space at end of low mem accessible */
+ ranges = <0x80000000 0x0 0x80000000 0x80000000>;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
memory {
device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256M */
+ reg = <0x80000000 0x10000000>; /* 256M */
};
};
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512MiB */
+ reg = <0x80000000 0x20000000>; /* 512MiB */
};
};
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512MiB */
+ reg = <0x80000000 0x20000000>; /* 512MiB */
};
};
/* gcc builtin sr needs reg param to be long immediate */
#define write_aux_reg(reg_immed, val) \
- __builtin_arc_sr((unsigned int)val, reg_immed)
+ __builtin_arc_sr((unsigned int)(val), reg_immed)
#else
*/
struct cpuinfo_arc_mmu {
- unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, u_dtlb:6, u_itlb:6;
- unsigned int num_tlb:16, sets:12, ways:4;
+ unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1;
+ unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8;
};
struct cpuinfo_arc_cache {
#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4)
#define ARC_REG_IC_PTAG 0x1E
#endif
+#define ARC_REG_IC_PTAG_HI 0x1F
/* Bit val in IC_CTRL */
#define IC_CTRL_CACHE_DISABLE 0x1
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#define ARC_REG_DC_PTAG 0x5C
+#define ARC_REG_DC_PTAG_HI 0x5F
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
void flush_cache_all(void);
-void flush_icache_range(unsigned long start, unsigned long end);
-void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
-void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
-void __flush_dcache_page(unsigned long paddr, unsigned long vaddr);
+void flush_icache_range(unsigned long kstart, unsigned long kend);
+void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
+void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
+void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
.macro FAKE_RET_FROM_EXCPN
- ld r9, [sp, PT_status32]
- bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK)
- bset r9, r9, STATUS_L_BIT
- sr r9, [erstatus]
- mov r9, 55f
- sr r9, [eret]
-
+ lr r9, [status32]
+ bclr r9, r9, STATUS_AE_BIT
+ or r9, r9, (STATUS_E1_MASK|STATUS_E2_MASK)
+ sr r9, [erstatus]
+ mov r9, 55f
+ sr r9, [eret]
rtie
55:
.endm
--- /dev/null
+/*
+ * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef CONFIG_HIGHMEM
+
+#include <uapi/asm/page.h>
+#include <asm/kmap_types.h>
+
+/* start after vmalloc area */
+#define FIXMAP_BASE (PAGE_OFFSET - FIXMAP_SIZE - PKMAP_SIZE)
+#define FIXMAP_SIZE PGDIR_SIZE /* only 1 PGD worth */
+#define KM_TYPE_NR ((FIXMAP_SIZE >> PAGE_SHIFT)/NR_CPUS)
+#define FIXMAP_ADDR(nr) (FIXMAP_BASE + ((nr) << PAGE_SHIFT))
+
+/* start after fixmap area */
+#define PKMAP_BASE (FIXMAP_BASE + FIXMAP_SIZE)
+#define PKMAP_SIZE PGDIR_SIZE
+#define LAST_PKMAP (PKMAP_SIZE >> PAGE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+
+#define kmap_prot PAGE_KERNEL
+
+
+#include <asm/cacheflush.h>
+
+extern void *kmap(struct page *page);
+extern void *kmap_high(struct page *page);
+extern void *kmap_atomic(struct page *page);
+extern void __kunmap_atomic(void *kvaddr);
+extern void kunmap_high(struct page *page);
+
+extern void kmap_init(void);
+
+static inline void flush_cache_kmaps(void)
+{
+ flush_cache_all();
+}
+
+static inline void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#ifndef _ASM_ARC_HUGEPAGE_H
+#define _ASM_ARC_HUGEPAGE_H
+
+#include <linux/types.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+ return __pte(pmd_val(pmd));
+}
+
+static inline pmd_t pte_pmd(pte_t pte)
+{
+ return __pmd(pte_val(pte));
+}
+
+#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd)))
+#define pmd_mknotpresent(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
+#define pmd_mksplitting(pmd) pte_pmd(pte_mkspecial(pmd_pte(pmd)))
+#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd)))
+
+#define pmd_write(pmd) pte_write(pmd_pte(pmd))
+#define pmd_young(pmd) pte_young(pmd_pte(pmd))
+#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd))
+#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd))
+#define pmd_special(pmd) pte_special(pmd_pte(pmd))
+
+#define mk_pmd(page, prot) pte_pmd(mk_pte(page, prot))
+
+#define pmd_trans_huge(pmd) (pmd_val(pmd) & _PAGE_HW_SZ)
+#define pmd_trans_splitting(pmd) (pmd_trans_huge(pmd) && pmd_special(pmd))
+
+#define pfn_pmd(pfn, prot) (__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
+{
+ /*
+ * open-coded pte_modify() with additional retaining of HW_SZ bit
+ * so that pmd_trans_huge() remains true for this PMD
+ */
+ return __pmd((pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HW_SZ)) | pgprot_val(newprot));
+}
+
+static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp, pmd_t pmd)
+{
+ *pmdp = pmd;
+}
+
+extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+ pmd_t *pmd);
+
+#define has_transparent_hugepage() 1
+
+/* Generic variants assume pgtable_t is struct page *, hence need for these */
+#define __HAVE_ARCH_PGTABLE_DEPOSIT
+extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+ pgtable_t pgtable);
+
+#define __HAVE_ARCH_PGTABLE_WITHDRAW
+extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
+
+#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+
+#endif
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
+#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
+#define STATUS_AE_BIT 5 /* Exception active */
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
+#define STATUS_AE_MASK (1<<STATUS_AE_BIT)
#define STATUS_IE_MASK (STATUS_E1_MASK | STATUS_E2_MASK)
/* Other Interrupt Handling related Aux regs */
/*
* Unconditionally Enable IRQs
*/
-extern void arch_local_irq_enable(void);
+static inline void arch_local_irq_enable(void)
+{
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " lr %0, [status32] \n"
+ " or %0, %0, %1 \n"
+ " flag %0 \n"
+ : "=&r"(temp)
+ : "n"((STATUS_E1_MASK | STATUS_E2_MASK))
+ : "cc", "memory");
+}
+
/*
* Unconditionally Disable IRQs
--- /dev/null
+/*
+ * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/*
+ * We primarily need to define KM_TYPE_NR here but that in turn
+ * is a function of PGDIR_SIZE etc.
+ * To avoid circular deps issue, put everything in asm/highmem.h
+ */
+#endif
* @dt_compat: Array of device tree 'compatible' strings
* (XXX: although only 1st entry is looked at)
* @init_early: Very early callback [called from setup_arch()]
- * @init_irq: setup external IRQ controllers [called from init_IRQ()]
- * @init_smp: for each CPU (e.g. setup IPI)
+ * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP)
* [(M):init_IRQ(), (o):start_kernel_secondary()]
- * @init_time: platform specific clocksource/clockevent registration
- * [called from time_init()]
* @init_machine: arch initcall level callback (e.g. populate static
* platform devices or parse Devicetree)
* @init_late: Late initcall level callback
struct machine_desc {
const char *name;
const char **dt_compat;
-
void (*init_early)(void);
- void (*init_irq)(void);
#ifdef CONFIG_SMP
- void (*init_smp)(unsigned int);
+ void (*init_cpu_smp)(unsigned int);
#endif
- void (*init_time)(void);
void (*init_machine)(void);
void (*init_late)(void);
__mcip_cmd(cmd, param);
}
-extern void mcip_init_early_smp(void);
-extern void mcip_init_smp(unsigned int cpu);
-
#endif
#endif
#if (CONFIG_ARC_MMU_VER < 4)
#define ARC_REG_TLBPD0 0x405
#define ARC_REG_TLBPD1 0x406
+#define ARC_REG_TLBPD1HI 0 /* Dummy: allows code sharing with ARC700 */
#define ARC_REG_TLBINDEX 0x407
#define ARC_REG_TLBCOMMAND 0x408
#define ARC_REG_PID 0x409
#else
#define ARC_REG_TLBPD0 0x460
#define ARC_REG_TLBPD1 0x461
+#define ARC_REG_TLBPD1HI 0x463
#define ARC_REG_TLBINDEX 0x464
#define ARC_REG_TLBCOMMAND 0x465
#define ARC_REG_PID 0x468
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void read_decode_mmu_bcr(void);
+static inline int is_pae40_enabled(void)
+{
+ return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
#endif /* !__ASSEMBLY__ */
#endif
typedef struct {
unsigned long pgprot;
} pgprot_t;
-typedef unsigned long pgtable_t;
#define pte_val(x) ((x).pte)
#define pgd_val(x) ((x).pgd)
#else /* !STRICT_MM_TYPECHECKS */
+#ifdef CONFIG_ARC_HAS_PAE40
+typedef unsigned long long pte_t;
+#else
typedef unsigned long pte_t;
+#endif
typedef unsigned long pgd_t;
typedef unsigned long pgprot_t;
-typedef unsigned long pgtable_t;
#define pte_val(x) (x)
#define pgd_val(x) (x)
#define pgprot_val(x) (x)
#define __pte(x) (x)
+#define __pgd(x) (x)
#define __pgprot(x) (x)
#define pte_pgprot(x) (x)
#endif
+typedef pte_t * pgtable_t;
+
#define ARCH_PFN_OFFSET (CONFIG_LINUX_LINK_BASE >> PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
static inline int __get_order_pgd(void)
{
- return get_order(PTRS_PER_PGD * 4);
+ return get_order(PTRS_PER_PGD * sizeof(pgd_t));
}
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
static inline int __get_order_pte(void)
{
- return get_order(PTRS_PER_PTE * 4);
+ return get_order(PTRS_PER_PTE * sizeof(pte_t));
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
pgtable_t pte_pg;
struct page *page;
- pte_pg = __get_free_pages(GFP_KERNEL | __GFP_REPEAT, __get_order_pte());
+ pte_pg = (pgtable_t)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, __get_order_pte());
if (!pte_pg)
return 0;
- memzero((void *)pte_pg, PTRS_PER_PTE * 4);
+ memzero((void *)pte_pg, PTRS_PER_PTE * sizeof(pte_t));
page = virt_to_page(pte_pg);
if (!pgtable_page_ctor(page)) {
__free_page(page);
static inline void pte_free(struct mm_struct *mm, pgtable_t ptep)
{
pgtable_page_dtor(virt_to_page(ptep));
- free_pages(ptep, __get_order_pte());
+ free_pages((unsigned long)ptep, __get_order_pte());
}
#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
#define check_pgt_cache() do { } while (0)
-#define pmd_pgtable(pmd) pmd_page_vaddr(pmd)
+#define pmd_pgtable(pmd) ((pgtable_t) pmd_page_vaddr(pmd))
#endif /* _ASM_ARC_PGALLOC_H */
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm-generic/pgtable-nopmd.h>
+#include <linux/const.h>
/**************************************************************************
* Page Table Flags
#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */
#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */
#define _PAGE_READ (1<<5) /* Page has user read perm (H) */
-#define _PAGE_MODIFIED (1<<6) /* Page modified (dirty) (S) */
+#define _PAGE_DIRTY (1<<6) /* Page modified (dirty) (S) */
+#define _PAGE_SPECIAL (1<<7)
#define _PAGE_GLOBAL (1<<8) /* Page is global (H) */
#define _PAGE_PRESENT (1<<10) /* TLB entry is valid (H) */
#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */
#define _PAGE_READ (1<<3) /* Page has user read perm (H) */
#define _PAGE_ACCESSED (1<<4) /* Page is accessed (S) */
-#define _PAGE_MODIFIED (1<<5) /* Page modified (dirty) (S) */
+#define _PAGE_DIRTY (1<<5) /* Page modified (dirty) (S) */
+#define _PAGE_SPECIAL (1<<6)
#if (CONFIG_ARC_MMU_VER >= 4)
#define _PAGE_WTHRU (1<<7) /* Page cache mode write-thru (H) */
#define _PAGE_PRESENT (1<<9) /* TLB entry is valid (H) */
#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_SZ (1<<10) /* Page Size indicator (H) */
+#define _PAGE_HW_SZ (1<<10) /* Page Size indicator (H): 0 normal, 1 super */
#endif
#define _PAGE_SHARED_CODE (1<<11) /* Shared Code page with cmn vaddr
usable for shared TLB entries (H) */
+
+#define _PAGE_UNUSED_BIT (1<<12)
#endif
/* vmalloc permissions */
#define _K_PAGE_PERMS (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
_PAGE_GLOBAL | _PAGE_PRESENT)
-#ifdef CONFIG_ARC_CACHE_PAGES
-#define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
-#else
-#define _PAGE_DEF_CACHEABLE (0)
+#ifndef CONFIG_ARC_CACHE_PAGES
+#undef _PAGE_CACHEABLE
+#define _PAGE_CACHEABLE 0
#endif
-/* Helper for every "user" page
- * -kernel can R/W/X
- * -by default cached, unless config otherwise
- * -present in memory
- */
-#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+#ifndef _PAGE_HW_SZ
+#define _PAGE_HW_SZ 0
+#endif
+
+/* Defaults for every user page */
+#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
/* More Abbrevaited helpers */
#define PAGE_U_NONE __pgprot(___DEF)
* user vaddr space - visible in all addr spaces, but kernel mode only
* Thus Global, all-kernel-access, no-user-access, cached
*/
-#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_CACHEABLE)
/* ioremap */
#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
/* Masks for actual TLB "PD"s */
-#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
+#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
#define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+
+#ifdef CONFIG_ARC_HAS_PAE40
+#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#else
#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
+#endif
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
/* Optimal Sizing of Pg Tbl - based on MMU page size */
#if defined(CONFIG_ARC_PAGE_SIZE_8K)
-#define BITS_FOR_PTE 8
+#define BITS_FOR_PTE 8 /* 11:8:13 */
#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define BITS_FOR_PTE 8
+#define BITS_FOR_PTE 8 /* 10:8:14 */
#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define BITS_FOR_PTE 9
+#define BITS_FOR_PTE 9 /* 11:9:12 */
#endif
#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE)
-#define PGDIR_SHIFT (BITS_FOR_PTE + BITS_IN_PAGE)
+#define PGDIR_SHIFT (32 - BITS_FOR_PGD)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */
#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#ifdef __ASSEMBLY__
-#define PTRS_PER_PTE (1 << BITS_FOR_PTE)
-#define PTRS_PER_PGD (1 << BITS_FOR_PGD)
-#else
-#define PTRS_PER_PTE (1UL << BITS_FOR_PTE)
-#define PTRS_PER_PGD (1UL << BITS_FOR_PGD)
-#endif
+#define PTRS_PER_PTE _BITUL(BITS_FOR_PTE)
+#define PTRS_PER_PGD _BITUL(BITS_FOR_PGD)
+
/*
* Number of entries a user land program use.
* TASK_SIZE is the maximum vaddr that can be used by a userland program.
(unsigned long)(((pte_val(x) - CONFIG_LINUX_LINK_BASE) >> \
PAGE_SHIFT)))
-#define mk_pte(page, pgprot) \
-({ \
- pte_t pte; \
- pte_val(pte) = __pa(page_address(page)) + pgprot_val(pgprot); \
- pte; \
-})
-
+#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
+ pgprot_val(prot)))
#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
/*
/* Zoo of pte_xxx function */
#define pte_read(pte) (pte_val(pte) & _PAGE_READ)
#define pte_write(pte) (pte_val(pte) & _PAGE_WRITE)
-#define pte_dirty(pte) (pte_val(pte) & _PAGE_MODIFIED)
+#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY)
#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED)
-#define pte_special(pte) (0)
+#define pte_special(pte) (pte_val(pte) & _PAGE_SPECIAL)
#define PTE_BIT_FUNC(fn, op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+PTE_BIT_FUNC(mknotpresent, &= ~(_PAGE_PRESENT));
PTE_BIT_FUNC(wrprotect, &= ~(_PAGE_WRITE));
PTE_BIT_FUNC(mkwrite, |= (_PAGE_WRITE));
-PTE_BIT_FUNC(mkclean, &= ~(_PAGE_MODIFIED));
-PTE_BIT_FUNC(mkdirty, |= (_PAGE_MODIFIED));
+PTE_BIT_FUNC(mkclean, &= ~(_PAGE_DIRTY));
+PTE_BIT_FUNC(mkdirty, |= (_PAGE_DIRTY));
PTE_BIT_FUNC(mkold, &= ~(_PAGE_ACCESSED));
PTE_BIT_FUNC(mkyoung, |= (_PAGE_ACCESSED));
PTE_BIT_FUNC(exprotect, &= ~(_PAGE_EXECUTE));
PTE_BIT_FUNC(mkexec, |= (_PAGE_EXECUTE));
+PTE_BIT_FUNC(mkspecial, |= (_PAGE_SPECIAL));
+PTE_BIT_FUNC(mkhuge, |= (_PAGE_HW_SZ));
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __HAVE_ARCH_PTE_SPECIAL
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
#define pgd_offset_fast(mm, addr) pgd_offset(mm, addr)
#endif
-extern void paging_init(void);
extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
pte_t *ptep);
* remap a physical page `pfn' of size `size' with page protection `prot'
* into virtual address `from'
*/
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#include <asm/hugepage.h>
+#endif
+
#include <asm-generic/pgtable.h>
/* to cope with aliasing VIPT cache */
* -----------------------------------------------------------------------------
*/
#define VMALLOC_START 0x70000000
-#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START)
+
+/*
+ * 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter
+ * See asm/highmem.h for details
+ */
+#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START - PGDIR_SIZE * 4)
#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
#define USER_KERNEL_GUTTER 0x10000000
void setup_processor(void);
void __init setup_arch_memory(void);
+/* Helpers used in arc_*_mumbojumbo routines */
+#define IS_AVAIL1(v, s) ((v) ? s : "")
+#define IS_DISABLED_RUN(v) ((v) ? "" : "(disabled) ")
+#define IS_USED_RUN(v) ((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
+
#endif /* __ASMARC_SETUP_H */
* struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP
*
* @info: SoC SMP specific info for /proc/cpuinfo etc
+ * @init_early_smp: A SMP specific h/w block can init itself
+ * Could be common across platforms so not covered by
+ * mach_desc->init_early()
+ * @init_irq_cpu: Called for each core so SMP h/w block driver can do
+ * any needed setup per cpu (e.g. IPI request)
* @cpu_kick: For Master to kickstart a cpu (optionally at a PC)
* @ipi_send: To send IPI to a @cpu
* @ips_clear: To clear IPI received at @irq
*/
struct plat_smp_ops {
const char *info;
+ void (*init_early_smp)(void);
+ void (*init_irq_cpu)(int cpu);
void (*cpu_kick)(int cpu, unsigned long pc);
void (*ipi_send)(int cpu);
void (*ipi_clear)(int irq);
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
void local_flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
+void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
#ifndef CONFIG_SMP
#define flush_tlb_range(vma, s, e) local_flush_tlb_range(vma, s, e)
#define flush_tlb_kernel_range(s, e) local_flush_tlb_kernel_range(s, e)
#define flush_tlb_all() local_flush_tlb_all()
#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
+#define flush_pmd_tlb_range(vma, s, e) local_flush_pmd_tlb_range(vma, s, e)
#else
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void flush_tlb_all(void);
extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
#endif /* CONFIG_SMP */
#endif
#ifndef _UAPI__ASM_ARC_PAGE_H
#define _UAPI__ASM_ARC_PAGE_H
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
#if defined(CONFIG_ARC_PAGE_SIZE_16K)
#define PAGE_SHIFT 14
#define PAGE_SHIFT 13
#endif
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE (1 << PAGE_SHIFT)
-#define PAGE_OFFSET (0x80000000)
-#else
-#define PAGE_SIZE (1UL << PAGE_SHIFT) /* Default 8K */
-#define PAGE_OFFSET (0x80000000UL) /* Kernel starts at 2G onwards */
-#endif
+#define PAGE_SIZE _BITUL(PAGE_SHIFT) /* Default 8K */
+#define PAGE_OFFSET _AC(0x80000000, UL) /* Kernel starts at 2G onwrds */
#define PAGE_MASK (~(PAGE_SIZE-1))
.align 4
# Initial 16 slots are Exception Vectors
-VECTOR stext ; Restart Vector (jump to entry point)
+VECTOR res_service ; Reset Vector
VECTOR mem_service ; Mem exception
VECTOR instr_service ; Instrn Error
VECTOR EV_MachineCheck ; Fatal Machine check
*/
; ********* Critical System Events **********************
-VECTOR res_service ; 0x0, Restart Vector (0x0)
+VECTOR res_service ; 0x0, Reset Vector (0x0)
VECTOR mem_service ; 0x8, Mem exception (0x1)
VECTOR instr_service ; 0x10, Instrn Error (0x2)
; ---------------------------------------------
.section .text, "ax",@progbits
-res_service: ; processor restart
- flag 0x1 ; not implemented
- nop
- nop
-reserved: ; processor restart
- rtie ; jump to processor initializations
+reserved:
+ flag 1 ; Unexpected event, halt
;##################### Interrupt Handling ##############################
;------------------------------------------------------
; if L2 IRQ interrupted a L1 ISR, disable preemption
+ ;
+ ; This is to avoid a potential L1-L2-L1 scenario
+ ; -L1 IRQ taken
+ ; -L2 interrupts L1 (before L1 ISR could run)
+ ; -preemption off IRQ, user task in syscall picked to run
+ ; -RTIE to userspace
+ ; Returns from L2 context fine
+ ; But both L1 and L2 re-enabled, so another L1 can be taken
+ ; while prev L1 is still unserviced
+ ;
;------------------------------------------------------
+ ; L2 interrupting L1 implies both L2 and L1 active
+ ; However both A2 and A1 are NOT set in STATUS32, thus
+ ; need to check STATUS32_L2 to determine if L1 was active
+
ld r9, [sp, PT_status32] ; get statu32_l2 (saved in pt_regs)
bbit0 r9, STATUS_A1_BIT, 1f ; L1 not active when L2 IRQ, so normal
- ; A1 is set in status32_l2
; bump thread_info->preempt_count (Disable preemption)
GET_CURR_THR_INFO_FROM_SP r10
ld r9, [r10, THREAD_INFO_PREEMPT_COUNT]
; Note that we use realtime STATUS32 (not pt_regs->status32) to
; decide that.
- ; if Returning from Exception
- btst r10, STATUS_AE_BIT
- bnz .Lexcep_ret
+ and.f 0, r10, (STATUS_A1_MASK|STATUS_A2_MASK)
+ bz .Lexcep_or_pure_K_ret
- ; Not Exception so maybe Interrupts (Level 1 or 2)
+ ; Returning from Interrupts (Level 1 or 2)
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
st r9, [r10, THREAD_INFO_PREEMPT_COUNT]
149:
- ;return from level 2
- INTERRUPT_EPILOGUE 2
+ INTERRUPT_EPILOGUE 2 ; return from level 2 interrupt
debug_marker_l2:
rtie
#endif
- bbit0 r10, STATUS_A1_BIT, .Lpure_k_mode_ret
-
- ;return from level 1
- INTERRUPT_EPILOGUE 1
+ INTERRUPT_EPILOGUE 1 ; return from level 1 interrupt
debug_marker_l1:
rtie
-.Lexcep_ret:
-.Lpure_k_mode_ret:
+.Lexcep_or_pure_K_ret:
;this case is for syscalls or Exceptions or pure kernel mode
.endm
.section .init.text, "ax",@progbits
- .type stext, @function
- .globl stext
-stext:
- ;-------------------------------------------------------------------
- ; Don't clobber r0-r2 yet. It might have bootloader provided info
- ;-------------------------------------------------------------------
+
+;----------------------------------------------------------------
+; Default Reset Handler (jumped into from Reset vector)
+; - Don't clobber r0,r1,r2 as they might have u-boot provided args
+; - Platforms can override this weak version if needed
+;----------------------------------------------------------------
+WEAK(res_service)
+ j stext
+END(res_service)
+
+;----------------------------------------------------------------
+; Kernel Entry point
+;----------------------------------------------------------------
+ENTRY(stext)
CPU_EARLY_SETUP
#ifdef CONFIG_SMP
- ; Ensure Boot (Master) proceeds. Others wait in platform dependent way
- ; IDENTITY Reg [ 3 2 1 0 ]
- ; (cpu-id) ^^^ => Zero for UP ARC700
- ; => #Core-ID if SMP (Master 0)
- ; Note that non-boot CPUs might not land here if halt-on-reset and
- ; instead breath life from @first_lines_of_secondary, but we still
- ; need to make sure only boot cpu takes this path.
GET_CPU_ID r5
cmp r5, 0
- mov.ne r0, r5
- jne arc_platform_smp_wait_to_boot
+ mov.nz r0, r5
+#ifdef CONFIG_ARC_SMP_HALT_ON_RESET
+ ; Non-Master can proceed as system would be booted sufficiently
+ jnz first_lines_of_secondary
+#else
+ ; Non-Masters wait for Master to boot enough and bring them up
+ jnz arc_platform_smp_wait_to_boot
#endif
+ ; Master falls thru
+#endif
+
; Clear BSS before updating any globals
; XXX: use ZOL here
mov r5, __bss_start
GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output)
j start_kernel ; "C" entry point
+END(stext)
#ifdef CONFIG_SMP
;----------------------------------------------------------------
; First lines of code run by secondary before jumping to 'C'
;----------------------------------------------------------------
.section .text, "ax",@progbits
- .type first_lines_of_secondary, @function
- .globl first_lines_of_secondary
-
-first_lines_of_secondary:
-
- CPU_EARLY_SETUP
+ENTRY(first_lines_of_secondary)
; setup per-cpu idle task as "current" on this CPU
ld r0, [@secondary_idle_tsk]
GET_TSK_STACK_BASE r0, sp
j start_kernel_secondary
-
+END(first_lines_of_secondary)
#endif
static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
- /*
- * XXX: the IPI IRQ needs to be handled like TIMER too. However ARC core
- * code doesn't own it (like TIMER0). ISS IDU / ezchip define it
- * in platform header which can't be included here as it goes
- * against multi-platform image philisophy
- */
- if (irq == TIMER0_IRQ)
+ switch (irq) {
+ case TIMER0_IRQ:
+#ifdef CONFIG_SMP
+ case IPI_IRQ:
+#endif
irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
- else
+ break;
+ default:
irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
-
+ }
return 0;
}
void arch_local_irq_enable(void)
{
-
unsigned long flags = arch_local_save_flags();
- /* Allow both L1 and L2 at the onset */
- flags |= (STATUS_E1_MASK | STATUS_E2_MASK);
-
- /* Called from hard ISR (between irq_enter and irq_exit) */
- if (in_irq()) {
-
- /* If in L2 ISR, don't re-enable any further IRQs as this can
- * cause IRQ priorities to get upside down. e.g. it could allow
- * L1 be taken while in L2 hard ISR which is wrong not only in
- * theory, it can also cause the dreaded L1-L2-L1 scenario
- */
- if (flags & STATUS_A2_MASK)
- flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK);
-
- /* Even if in L1 ISR, allowe Higher prio L2 IRQs */
- else if (flags & STATUS_A1_MASK)
- flags &= ~(STATUS_E1_MASK);
- }
-
- /* called from soft IRQ, ideally we want to re-enable all levels */
-
- else if (in_softirq()) {
-
- /* However if this is case of L1 interrupted by L2,
- * re-enabling both may cause whaco L1-L2-L1 scenario
- * because ARC700 allows level 1 to interrupt an active L2 ISR
- * Thus we disable both
- * However some code, executing in soft ISR wants some IRQs
- * to be enabled so we re-enable L2 only
- *
- * How do we determine L1 intr by L2
- * -A2 is set (means in L2 ISR)
- * -E1 is set in this ISR's pt_regs->status32 which is
- * saved copy of status32_l2 when l2 ISR happened
- */
- struct pt_regs *pt = get_irq_regs();
-
- if ((flags & STATUS_A2_MASK) && pt &&
- (pt->status32 & STATUS_A1_MASK)) {
- /*flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); */
- flags &= ~(STATUS_E1_MASK);
- }
- }
+ if (flags & STATUS_A2_MASK)
+ flags |= STATUS_E2_MASK;
+ else if (flags & STATUS_A1_MASK)
+ flags |= STATUS_E1_MASK;
arch_local_irq_restore(flags);
}
-#else /* ! CONFIG_ARC_COMPACT_IRQ_LEVELS */
-
-/*
- * Simpler version for only 1 level of interrupt
- * Here we only Worry about Level 1 Bits
- */
-void arch_local_irq_enable(void)
-{
- unsigned long flags;
-
- /*
- * ARC IDE Drivers tries to re-enable interrupts from hard-isr
- * context which is simply wrong
- */
- if (in_irq()) {
- WARN_ONCE(1, "IRQ enabled from hard-isr");
- return;
- }
-
- flags = arch_local_save_flags();
- flags |= (STATUS_E1_MASK | STATUS_E2_MASK);
- arch_local_irq_restore(flags);
-}
-#endif
EXPORT_SYMBOL(arch_local_irq_enable);
+#endif
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <asm/mach_desc.h>
+#include <asm/smp.h>
/*
* Late Interrupt system init called from start_kernel for Boot CPU only
*/
void __init init_IRQ(void)
{
- /* Any external intc can be setup here */
- if (machine_desc->init_irq)
- machine_desc->init_irq();
-
- /* process the entire interrupt tree in one go */
+ /*
+ * process the entire interrupt tree in one go
+ * Any external intc will be setup provided DT chains them
+ * properly
+ */
irqchip_init();
#ifdef CONFIG_SMP
- /* Master CPU can initialize it's side of IPI */
- if (machine_desc->init_smp)
- machine_desc->init_smp(smp_processor_id());
+ /* a SMP H/w block could do IPI IRQ request here */
+ if (plat_smp_ops.init_irq_cpu)
+ plat_smp_ops.init_irq_cpu(smp_processor_id());
+
+ if (machine_desc->init_cpu_smp)
+ machine_desc->init_cpu_smp(smp_processor_id());
#endif
}
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <asm/mcip.h>
+#include <asm/setup.h>
static char smp_cpuinfo_buf[128];
static int idu_detected;
static DEFINE_RAW_SPINLOCK(mcip_lock);
-/*
- * Any SMP specific init any CPU does when it comes up.
- * Here we setup the CPU to enable Inter-Processor-Interrupts
- * Called for each CPU
- * -Master : init_IRQ()
- * -Other(s) : start_kernel_secondary()
- */
-void mcip_init_smp(unsigned int cpu)
+static void mcip_setup_per_cpu(int cpu)
{
smp_ipi_irq_setup(cpu, IPI_IRQ);
}
#endif
}
-volatile int wake_flag;
-
-static void mcip_wakeup_cpu(int cpu, unsigned long pc)
-{
- BUG_ON(cpu == 0);
- wake_flag = cpu;
-}
-
-void arc_platform_smp_wait_to_boot(int cpu)
+static void mcip_probe_n_setup(void)
{
- while (wake_flag != cpu)
- ;
-
- wake_flag = 0;
- __asm__ __volatile__("j @first_lines_of_secondary \n");
-}
-
-struct plat_smp_ops plat_smp_ops = {
- .info = smp_cpuinfo_buf,
- .cpu_kick = mcip_wakeup_cpu,
- .ipi_send = mcip_ipi_send,
- .ipi_clear = mcip_ipi_clear,
-};
-
-void mcip_init_early_smp(void)
-{
-#define IS_AVAIL1(var, str) ((var) ? str : "")
-
struct mcip_bcr {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad3:8,
panic("kernel trying to use non-existent GRTC\n");
}
+struct plat_smp_ops plat_smp_ops = {
+ .info = smp_cpuinfo_buf,
+ .init_early_smp = mcip_probe_n_setup,
+ .init_irq_cpu = mcip_setup_per_cpu,
+ .ipi_send = mcip_ipi_send,
+ .ipi_clear = mcip_ipi_clear,
+};
+
/***************************************************************************
* ARCv2 Interrupt Distribution Unit (IDU)
*
{ {0x00, NULL } }
};
-#define IS_AVAIL1(v, s) ((v) ? s : "")
-#define IS_USED_RUN(v) ((v) ? "" : "(not used) ")
-#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg))
-#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
if (machine_desc->init_early)
machine_desc->init_early();
- setup_processor();
smp_init_cpus();
+
+ setup_processor();
setup_arch_memory();
/* copy flat DT out of .init and then unflatten it */
}
/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
+ * Called from setup_arch() before calling setup_processor()
+ *
+ * - Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ * - Call early smp init hook. This can initialize a specific multi-core
+ * IP which is say common to several platforms (hence not part of
+ * platform specific int_early() hook)
*/
void __init smp_init_cpus(void)
{
for (i = 0; i < NR_CPUS; i++)
set_cpu_possible(i, true);
+
+ if (plat_smp_ops.init_early_smp)
+ plat_smp_ops.init_early_smp();
}
/* called from init ( ) => process 1 */
}
/*
- * After power-up, a non Master CPU needs to wait for Master to kick start it
- *
- * The default implementation halts
- *
- * This relies on platform specific support allowing Master to directly set
- * this CPU's PC (to be @first_lines_of_secondary() and kick start it.
- *
- * In lack of such h/w assist, platforms can override this function
- * - make this function busy-spin on a token, eventually set by Master
- * (from arc_platform_smp_wakeup_cpu())
- * - Once token is available, jump to @first_lines_of_secondary
- * (using inline asm).
- *
- * Alert: can NOT use stack here as it has not been determined/setup for CPU.
- * If it turns out to be elaborate, it's better to code it in assembly
- *
+ * Default smp boot helper for Run-on-reset case where all cores start off
+ * together. Non-masters need to wait for Master to start running.
+ * This is implemented using a flag in memory, which Non-masters spin-wait on.
+ * Master sets it to cpu-id of core to "ungate" it.
*/
-void __weak arc_platform_smp_wait_to_boot(int cpu)
+static volatile int wake_flag;
+
+static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
{
- /*
- * As a hack for debugging - since debugger will single-step over the
- * FLAG insn - wrap the halt itself it in a self loop
- */
- __asm__ __volatile__(
- "1: \n"
- " flag 1 \n"
- " b 1b \n");
+ BUG_ON(cpu == 0);
+ wake_flag = cpu;
+}
+
+void arc_platform_smp_wait_to_boot(int cpu)
+{
+ while (wake_flag != cpu)
+ ;
+
+ wake_flag = 0;
+ __asm__ __volatile__("j @first_lines_of_secondary \n");
}
+
const char *arc_platform_smp_cpuinfo(void)
{
return plat_smp_ops.info ? : "";
pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
- if (machine_desc->init_smp)
- machine_desc->init_smp(cpu);
+ /* Some SMP H/w setup - for each cpu */
+ if (plat_smp_ops.init_irq_cpu)
+ plat_smp_ops.init_irq_cpu(cpu);
+
+ if (machine_desc->init_cpu_smp)
+ machine_desc->init_cpu_smp(cpu);
arc_local_timer_setup();
if (plat_smp_ops.cpu_kick)
plat_smp_ops.cpu_kick(cpu,
(unsigned long)first_lines_of_secondary);
+ else
+ arc_default_smp_cpu_kick(cpu, (unsigned long)NULL);
/* wait for 1 sec after kicking the secondary */
wait_till = jiffies + HZ;
/* sets up the periodic event timer */
arc_local_timer_setup();
-
- if (machine_desc->init_time)
- machine_desc->init_time();
}
#include <asm/thread_info.h>
OUTPUT_ARCH(arc)
-ENTRY(_stext)
+ENTRY(res_service)
#ifdef CONFIG_CPU_BIG_ENDIAN
jiffies = jiffies_64 + 4;
obj-y := extable.o ioremap.o dma.o fault.o init.o
obj-y += tlb.o tlbex.o cache.o mmap.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
int ioc_exists;
volatile int slc_enable = 1, ioc_enable = 1;
-void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
+void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int cacheop);
void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
int n = 0;
struct cpuinfo_arc_cache *p;
-#define IS_USED_RUN(v) ((v) ? "" : "(disabled) ")
#define PR_CACHE(p, cfg, str) \
if (!(p)->ver) \
n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
(p)->sz_k, (p)->assoc, (p)->line_len, \
(p)->vipt ? "VIPT" : "PIPT", \
(p)->alias ? " aliasing" : "", \
- IS_ENABLED(cfg) ? "" : " (not used)");
+ IS_USED_CFG(cfg));
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
if (ioc_exists)
n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n",
- IS_USED_RUN(ioc_enable));
+ IS_DISABLED_RUN(ioc_enable));
return buf;
}
*/
static inline
-void __cache_line_loop_v2(unsigned long paddr, unsigned long vaddr,
+void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned int aux_cmd;
}
}
+/*
+ * For ARC700 MMUv3 I-cache and D-cache flushes
+ * Also reused for HS38 aliasing I-cache configuration
+ */
static inline
-void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr,
+void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned int aux_cmd, aux_tag;
if (full_page)
write_aux_reg(aux_tag, paddr);
+ /*
+ * This is technically for MMU v4, using the MMU v3 programming model
+ * Special work for HS38 aliasing I-cache configuratino with PAE40
+ * - upper 8 bits of paddr need to be written into PTAG_HI
+ * - (and needs to be written before the lower 32 bits)
+ * Note that PTAG_HI is hoisted outside the line loop
+ */
+ if (is_pae40_enabled() && op == OP_INV_IC)
+ write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+
while (num_lines-- > 0) {
if (!full_page) {
write_aux_reg(aux_tag, paddr);
}
/*
- * In HS38x (MMU v4), although icache is VIPT, only paddr is needed for cache
- * maintenance ops (in IVIL reg), as long as icache doesn't alias.
+ * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT
+ * Here's how cache ops are implemented
+ *
+ * - D-cache: only paddr needed (in DC_IVDL/DC_FLDL)
+ * - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL)
+ * - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG
+ * respectively, similar to MMU v3 programming model, hence
+ * __cache_line_loop_v3() is used)
*
- * For Aliasing icache, vaddr is also needed (in IVIL), while paddr is
- * specified in PTAG (similar to MMU v3)
+ * If PAE40 is enabled, independent of aliasing considerations, the higher bits
+ * needs to be written into PTAG_HI
*/
static inline
-void __cache_line_loop_v4(unsigned long paddr, unsigned long vaddr,
+void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int cacheop)
{
unsigned int aux_cmd;
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
+ /*
+ * For HS38 PAE40 configuration
+ * - upper 8 bits of paddr need to be written into PTAG_HI
+ * - (and needs to be written before the lower 32 bits)
+ */
+ if (is_pae40_enabled()) {
+ if (cacheop == OP_INV_IC)
+ /*
+ * Non aliasing I-cache in HS38,
+ * aliasing I-cache handled in __cache_line_loop_v3()
+ */
+ write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+ else
+ write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32);
+ }
+
while (num_lines-- > 0) {
write_aux_reg(aux_cmd, paddr);
paddr += L1_CACHE_BYTES;
/*
* D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback)
*/
-static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
+static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned long flags;
}
static inline void
-__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
+__ic_line_inv_vaddr_local(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz)
{
unsigned long flags;
#else
struct ic_inv_args {
- unsigned long paddr, vaddr;
+ phys_addr_t paddr, vaddr;
int sz;
};
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
}
-static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
+static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz)
{
struct ic_inv_args ic_inv = {
#endif /* CONFIG_ARC_HAS_ICACHE */
-noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
+noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
{
#ifdef CONFIG_ISA_ARCV2
/*
} else if (page_mapped(page)) {
/* kernel reading from page with U-mapping */
- unsigned long paddr = (unsigned long)page_address(page);
+ phys_addr_t paddr = (unsigned long)page_address(page);
unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
if (addr_not_cache_congruent(paddr, vaddr))
* builtin kernel page will not have any virtual mappings.
* kprobe on loadable module will be kernel vaddr.
*/
-void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
+void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len)
{
__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
__ic_line_inv_vaddr(paddr, vaddr, len);
}
/* wrapper to compile time eliminate alignment checks in flush loop */
-void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
+void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr)
{
__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
}
* wrapper to clearout kernel or userspace mappings of a page
* For kernel mappings @vaddr == @paddr
*/
-void __flush_dcache_page(unsigned long paddr, unsigned long vaddr)
+void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
{
__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
}
void copy_user_highpage(struct page *to, struct page *from,
unsigned long u_vaddr, struct vm_area_struct *vma)
{
- unsigned long kfrom = (unsigned long)page_address(from);
- unsigned long kto = (unsigned long)page_address(to);
+ void *kfrom = kmap_atomic(from);
+ void *kto = kmap_atomic(to);
int clean_src_k_mappings = 0;
/*
*
* Note that while @u_vaddr refers to DST page's userspace vaddr, it is
* equally valid for SRC page as well
+ *
+ * For !VIPT cache, all of this gets compiled out as
+ * addr_not_cache_congruent() is 0
*/
if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
- __flush_dcache_page(kfrom, u_vaddr);
+ __flush_dcache_page((unsigned long)kfrom, u_vaddr);
clean_src_k_mappings = 1;
}
- copy_page((void *)kto, (void *)kfrom);
+ copy_page(kto, kfrom);
/*
* Mark DST page K-mapping as dirty for a later finalization by
* sync the kernel mapping back to physical page
*/
if (clean_src_k_mappings) {
- __flush_dcache_page(kfrom, kfrom);
+ __flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom);
set_bit(PG_dc_clean, &from->flags);
} else {
clear_bit(PG_dc_clean, &from->flags);
}
+
+ kunmap_atomic(kto);
+ kunmap_atomic(kfrom);
}
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
#include <asm/pgalloc.h>
#include <asm/mmu.h>
-static int handle_vmalloc_fault(unsigned long address)
+/*
+ * kernel virtual address is required to implement vmalloc/pkmap/fixmap
+ * Refer to asm/processor.h for System Memory Map
+ *
+ * It simply copies the PMD entry (pointer to 2nd level page table or hugepage)
+ * from swapper pgdir to task pgdir. The 2nd level table/page is thus shared
+ */
+noinline static int handle_kernel_vaddr_fault(unsigned long address)
{
/*
* Synchronize this task's top level page-table
* only copy the information from the master page table,
* nothing more.
*/
- if (address >= VMALLOC_START && address <= VMALLOC_END) {
- ret = handle_vmalloc_fault(address);
+ if (address >= VMALLOC_START) {
+ ret = handle_kernel_vaddr_fault(address);
if (unlikely(ret))
goto bad_area_nosemaphore;
else
--- /dev/null
+/*
+ * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/highmem.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * HIGHMEM API:
+ *
+ * kmap() API provides sleep semantics hence refered to as "permanent maps"
+ * It allows mapping LAST_PKMAP pages, using @last_pkmap_nr as the cursor
+ * for book-keeping
+ *
+ * kmap_atomic() can't sleep (calls pagefault_disable()), thus it provides
+ * shortlived ala "temporary mappings" which historically were implemented as
+ * fixmaps (compile time addr etc). Their book-keeping is done per cpu.
+ *
+ * Both these facts combined (preemption disabled and per-cpu allocation)
+ * means the total number of concurrent fixmaps will be limited to max
+ * such allocations in a single control path. Thus KM_TYPE_NR (another
+ * historic relic) is a small'ish number which caps max percpu fixmaps
+ *
+ * ARC HIGHMEM Details
+ *
+ * - the kernel vaddr space from 0x7z to 0x8z (currently used by vmalloc/module)
+ * is now shared between vmalloc and kmap (non overlapping though)
+ *
+ * - Both fixmap/pkmap use a dedicated page table each, hooked up to swapper PGD
+ * This means each only has 1 PGDIR_SIZE worth of kvaddr mappings, which means
+ * 2M of kvaddr space for typical config (8K page and 11:8:13 traversal split)
+ *
+ * - fixmap anyhow needs a limited number of mappings. So 2M kvaddr == 256 PTE
+ * slots across NR_CPUS would be more than sufficient (generic code defines
+ * KM_TYPE_NR as 20).
+ *
+ * - pkmap being preemptible, in theory could do with more than 256 concurrent
+ * mappings. However, generic pkmap code: map_new_virtual(), doesn't traverse
+ * the PGD and only works with a single page table @pkmap_page_table, hence
+ * sets the limit
+ */
+
+extern pte_t * pkmap_page_table;
+static pte_t * fixmap_page_table;
+
+void *kmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ return kmap_high(page);
+}
+
+void *kmap_atomic(struct page *page)
+{
+ int idx, cpu_idx;
+ unsigned long vaddr;
+
+ preempt_disable();
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ cpu_idx = kmap_atomic_idx_push();
+ idx = cpu_idx + KM_TYPE_NR * smp_processor_id();
+ vaddr = FIXMAP_ADDR(idx);
+
+ set_pte_at(&init_mm, vaddr, fixmap_page_table + idx,
+ mk_pte(page, kmap_prot));
+
+ return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void __kunmap_atomic(void *kv)
+{
+ unsigned long kvaddr = (unsigned long)kv;
+
+ if (kvaddr >= FIXMAP_BASE && kvaddr < (FIXMAP_BASE + FIXMAP_SIZE)) {
+
+ /*
+ * Because preemption is disabled, this vaddr can be associated
+ * with the current allocated index.
+ * But in case of multiple live kmap_atomic(), it still relies on
+ * callers to unmap in right order.
+ */
+ int cpu_idx = kmap_atomic_idx();
+ int idx = cpu_idx + KM_TYPE_NR * smp_processor_id();
+
+ WARN_ON(kvaddr != FIXMAP_ADDR(idx));
+
+ pte_clear(&init_mm, kvaddr, fixmap_page_table + idx);
+ local_flush_tlb_kernel_range(kvaddr, kvaddr + PAGE_SIZE);
+
+ kmap_atomic_idx_pop();
+ }
+
+ pagefault_enable();
+ preempt_enable();
+}
+EXPORT_SYMBOL(__kunmap_atomic);
+
+noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr)
+{
+ pgd_t *pgd_k;
+ pud_t *pud_k;
+ pmd_t *pmd_k;
+ pte_t *pte_k;
+
+ pgd_k = pgd_offset_k(kvaddr);
+ pud_k = pud_offset(pgd_k, kvaddr);
+ pmd_k = pmd_offset(pud_k, kvaddr);
+
+ pte_k = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+ pmd_populate_kernel(&init_mm, pmd_k, pte_k);
+ return pte_k;
+}
+
+void kmap_init(void)
+{
+ /* Due to recursive include hell, we can't do this in processor.h */
+ BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE));
+
+ BUILD_BUG_ON(KM_TYPE_NR > PTRS_PER_PTE);
+ pkmap_page_table = alloc_kmap_pgtable(PKMAP_BASE);
+
+ BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE);
+ fixmap_page_table = alloc_kmap_pgtable(FIXMAP_BASE);
+}
#endif
#include <linux/swap.h>
#include <linux/module.h>
+#include <linux/highmem.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
EXPORT_SYMBOL(empty_zero_page);
-/* Default tot mem from .config */
-static unsigned long arc_mem_sz = 0x20000000; /* some default */
+static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
+static unsigned long low_mem_sz;
+
+#ifdef CONFIG_HIGHMEM
+static unsigned long min_high_pfn;
+static u64 high_mem_start;
+static u64 high_mem_sz;
+#endif
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
- arc_mem_sz = memparse(str, NULL) & PAGE_MASK;
+ low_mem_sz = memparse(str, NULL) & PAGE_MASK;
/* early console might not be setup yet - it will show up later */
- pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(arc_mem_sz));
+ pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
return 0;
}
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
- arc_mem_sz = size & PAGE_MASK;
- pr_info("Memory size set via devicetree %ldM\n", TO_MB(arc_mem_sz));
+ int in_use = 0;
+
+ if (!low_mem_sz) {
+ BUG_ON(base != low_mem_start);
+ low_mem_sz = size;
+ in_use = 1;
+ } else {
+#ifdef CONFIG_HIGHMEM
+ high_mem_start = base;
+ high_mem_sz = size;
+ in_use = 1;
+#endif
+ }
+
+ pr_info("Memory @ %llx [%lldM] %s\n",
+ base, TO_MB(size), !in_use ? "Not used":"");
}
#ifdef CONFIG_BLK_DEV_INITRD
void __init setup_arch_memory(void)
{
unsigned long zones_size[MAX_NR_ZONES];
- unsigned long end_mem = CONFIG_LINUX_LINK_BASE + arc_mem_sz;
+ unsigned long zones_holes[MAX_NR_ZONES];
init_mm.start_code = (unsigned long)_text;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
- /*
- * We do it here, so that memory is correctly instantiated
- * even if "mem=xxx" cmline over-ride is given and/or
- * DT has memory node. Each causes an update to @arc_mem_sz
- * and we finally add memory one here
- */
- memblock_add(CONFIG_LINUX_LINK_BASE, arc_mem_sz);
-
- /*------------- externs in mm need setting up ---------------*/
-
/* first page of system - kernel .vector starts here */
min_low_pfn = ARCH_PFN_OFFSET;
- /* Last usable page of low mem (no HIGHMEM yet for ARC port) */
- max_low_pfn = max_pfn = PFN_DOWN(end_mem);
+ /* Last usable page of low mem */
+ max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
- max_mapnr = max_low_pfn - min_low_pfn;
+#ifdef CONFIG_HIGHMEM
+ min_high_pfn = PFN_DOWN(high_mem_start);
+ max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+#endif
+
+ max_mapnr = max_pfn - min_low_pfn;
- /*------------- reserve kernel image -----------------------*/
- memblock_reserve(CONFIG_LINUX_LINK_BASE,
- __pa(_end) - CONFIG_LINUX_LINK_BASE);
+ /*------------- bootmem allocator setup -----------------------*/
+
+ /*
+ * seed the bootmem allocator after any DT memory node parsing or
+ * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
+ *
+ * Only low mem is added, otherwise we have crashes when allocating
+ * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
+ * avail memory, ending in highmem with a > 32-bit address. However
+ * it then tries to memset it with a truncaed 32-bit handle, causing
+ * the crash
+ */
+
+ memblock_add(low_mem_start, low_mem_sz);
+ memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
- /*------------- reserve initrd image -----------------------*/
if (initrd_start)
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif
memblock_dump_all();
- /*-------------- node setup --------------------------------*/
+ /*----------------- node/zones setup --------------------------*/
memset(zones_size, 0, sizeof(zones_size));
- zones_size[ZONE_NORMAL] = max_mapnr;
+ memset(zones_holes, 0, sizeof(zones_holes));
+
+ zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
+ zones_holes[ZONE_NORMAL] = 0;
+
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
+
+ /* This handles the peripheral address space hole */
+ zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
+#endif
/*
* We can't use the helper free_area_init(zones[]) because it uses
free_area_init_node(0, /* node-id */
zones_size, /* num pages per zone */
min_low_pfn, /* first pfn of node */
- NULL); /* NO holes */
+ zones_holes); /* holes */
- high_memory = (void *)end_mem;
+#ifdef CONFIG_HIGHMEM
+ high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
+ kmap_init();
+#endif
}
/*
*/
void __init mem_init(void)
{
+#ifdef CONFIG_HIGHMEM
+ unsigned long tmp;
+
+ reset_all_zones_managed_pages();
+ for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
+ free_highmem_page(pfn_to_page(tmp));
+#endif
+
free_all_bootmem();
mem_init_print_info(NULL);
}
static inline void __tlb_entry_erase(void)
{
write_aux_reg(ARC_REG_TLBPD1, 0);
+
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_TLBPD1HI, 0);
+
write_aux_reg(ARC_REG_TLBPD0, 0);
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
}
}
-static void tlb_entry_insert(unsigned int pd0, unsigned int pd1)
+static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
{
unsigned int idx;
write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry);
}
-static void tlb_entry_insert(unsigned int pd0, unsigned int pd1)
+static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
{
write_aux_reg(ARC_REG_TLBPD0, pd0);
write_aux_reg(ARC_REG_TLBPD1, pd1);
+
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32);
+
write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry);
}
noinline void local_flush_tlb_all(void)
{
+ struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
unsigned long flags;
unsigned int entry;
- struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+ int num_tlb = mmu->sets * mmu->ways;
local_irq_save(flags);
/* Load PD0 and PD1 with template for a Blank Entry */
write_aux_reg(ARC_REG_TLBPD1, 0);
+
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_TLBPD1HI, 0);
+
write_aux_reg(ARC_REG_TLBPD0, 0);
- for (entry = 0; entry < mmu->num_tlb; entry++) {
+ for (entry = 0; entry < num_tlb; entry++) {
/* write this entry to the TLB */
write_aux_reg(ARC_REG_TLBINDEX, entry);
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
}
+ if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
+ const int stlb_idx = 0x800;
+
+ /* Blank sTLB entry */
+ write_aux_reg(ARC_REG_TLBPD0, _PAGE_HW_SZ);
+
+ for (entry = stlb_idx; entry < stlb_idx + 16; entry++) {
+ write_aux_reg(ARC_REG_TLBINDEX, entry);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+ }
+ }
+
utlb_invalidate();
local_irq_restore(flags);
local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline void ipi_flush_pmd_tlb_range(void *arg)
+{
+ struct tlb_args *ta = arg;
+
+ local_flush_pmd_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+#endif
+
static inline void ipi_flush_tlb_kernel_range(void *arg)
{
struct tlb_args *ta = (struct tlb_args *)arg;
on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1);
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ struct tlb_args ta = {
+ .ta_vma = vma,
+ .ta_start = start,
+ .ta_end = end
+ };
+
+ on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_pmd_tlb_range, &ta, 1);
+}
+#endif
+
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
struct tlb_args ta = {
/*
* Routine to create a TLB entry
*/
-void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
+void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
{
unsigned long flags;
unsigned int asid_or_sasid, rwx;
- unsigned long pd0, pd1;
+ unsigned long pd0;
+ pte_t pd1;
/*
* create_tlb() assumes that current->mm == vma->mm, since
local_irq_save(flags);
- tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), address);
+ tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr);
- address &= PAGE_MASK;
+ vaddr &= PAGE_MASK;
/* update this PTE credentials */
pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED);
/* ASID for this task */
asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff;
- pd0 = address | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0);
+ pd0 = vaddr | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0);
/*
* ARC MMU provides fully orthogonal access bits for K/U mode,
pte_t *ptep)
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
- unsigned long paddr = pte_val(*ptep) & PAGE_MASK;
+ phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
struct page *page = pfn_to_page(pte_pfn(*ptep));
create_tlb(vma, vaddr, ptep);
}
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+/*
+ * MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP
+ * support.
+ *
+ * Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a
+ * new bit "SZ" in TLB page desciptor to distinguish between them.
+ * Super Page size is configurable in hardware (4K to 16M), but fixed once
+ * RTL builds.
+ *
+ * The exact THP size a Linx configuration will support is a function of:
+ * - MMU page size (typical 8K, RTL fixed)
+ * - software page walker address split between PGD:PTE:PFN (typical
+ * 11:8:13, but can be changed with 1 line)
+ * So for above default, THP size supported is 8K * (2^8) = 2M
+ *
+ * Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime
+ * reduces to 1 level (as PTE is folded into PGD and canonically referred
+ * to as PMD).
+ * Thus THP PMD accessors are implemented in terms of PTE (just like sparc)
+ */
+
+void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+ pmd_t *pmd)
+{
+ pte_t pte = __pte(pmd_val(*pmd));
+ update_mmu_cache(vma, addr, &pte);
+}
+
+void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+ pgtable_t pgtable)
+{
+ struct list_head *lh = (struct list_head *) pgtable;
+
+ assert_spin_locked(&mm->page_table_lock);
+
+ /* FIFO */
+ if (!pmd_huge_pte(mm, pmdp))
+ INIT_LIST_HEAD(lh);
+ else
+ list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
+ pmd_huge_pte(mm, pmdp) = pgtable;
+}
+
+pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
+{
+ struct list_head *lh;
+ pgtable_t pgtable;
+
+ assert_spin_locked(&mm->page_table_lock);
+
+ pgtable = pmd_huge_pte(mm, pmdp);
+ lh = (struct list_head *) pgtable;
+ if (list_empty(lh))
+ pmd_huge_pte(mm, pmdp) = NULL;
+ else {
+ pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
+ list_del(lh);
+ }
+
+ pte_val(pgtable[0]) = 0;
+ pte_val(pgtable[1]) = 0;
+
+ return pgtable;
+}
+
+void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ unsigned int cpu;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ cpu = smp_processor_id();
+
+ if (likely(asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID)) {
+ unsigned int asid = hw_pid(vma->vm_mm, cpu);
+
+ /* No need to loop here: this will always be for 1 Huge Page */
+ tlb_entry_erase(start | _PAGE_HW_SZ | asid);
+ }
+
+ local_irq_restore(flags);
+}
+
+#endif
+
/* Read the Cache Build Confuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
struct bcr_mmu_3 {
#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
+ unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
u_itlb:4, u_dtlb:4;
#else
- unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
+ unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
ways:4, ver:8;
#endif
} *mmu3;
if (mmu->ver <= 2) {
mmu2 = (struct bcr_mmu_1_2 *)&tmp;
- mmu->pg_sz_k = TO_KB(PAGE_SIZE);
+ mmu->pg_sz_k = TO_KB(0x2000);
mmu->sets = 1 << mmu2->sets;
mmu->ways = 1 << mmu2->ways;
mmu->u_dtlb = mmu2->u_dtlb;
mmu->ways = 1 << mmu3->ways;
mmu->u_dtlb = mmu3->u_dtlb;
mmu->u_itlb = mmu3->u_itlb;
+ mmu->sasid = mmu3->sasid;
} else {
mmu4 = (struct bcr_mmu_4 *)&tmp;
mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
mmu->ways = mmu4->n_ways * 2;
mmu->u_dtlb = mmu4->u_dtlb * 4;
mmu->u_itlb = mmu4->u_itlb * 4;
+ mmu->sasid = mmu4->sasid;
+ mmu->pae = mmu4->pae;
}
-
- mmu->num_tlb = mmu->sets * mmu->ways;
}
char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
if (p_mmu->s_pg_sz_m)
scnprintf(super_pg, 64, "%dM Super Page%s, ",
- p_mmu->s_pg_sz_m, " (not used)");
+ p_mmu->s_pg_sz_m,
+ IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
n += scnprintf(buf + n, len - n,
- "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s\n",
+ "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s%s\n",
p_mmu->ver, p_mmu->pg_sz_k, super_pg,
- p_mmu->num_tlb, p_mmu->sets, p_mmu->ways,
+ p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
p_mmu->u_dtlb, p_mmu->u_itlb,
- IS_ENABLED(CONFIG_ARC_MMU_SASID) ? ",SASID" : "");
+ IS_AVAIL2(p_mmu->pae, "PAE40 ", CONFIG_ARC_HAS_PAE40));
return buf;
}
if (mmu->pg_sz_k != TO_KB(PAGE_SIZE))
panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
+ if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
+ mmu->s_pg_sz_m != TO_MB(HPAGE_PMD_SIZE))
+ panic("MMU Super pg size != Linux HPAGE_PMD_SIZE (%luM)\n",
+ (unsigned long)TO_MB(HPAGE_PMD_SIZE));
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae)
+ panic("Hardware doesn't support PAE40\n");
+
/* Enable the MMU */
write_aux_reg(ARC_REG_PID, MMU_ENABLE);
* the duplicate one.
* -Knob to be verbose abt it.(TODO: hook them up to debugfs)
*/
-volatile int dup_pd_verbose = 1;/* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
{
- int set, way, n;
- unsigned long flags, is_valid;
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
- unsigned int pd0[mmu->ways], pd1[mmu->ways];
+ unsigned int pd0[mmu->ways];
+ unsigned long flags;
+ int set;
local_irq_save(flags);
/* loop thru all sets of TLB */
for (set = 0; set < mmu->sets; set++) {
+ int is_valid, way;
+
/* read out all the ways of current set */
for (way = 0, is_valid = 0; way < mmu->ways; way++) {
write_aux_reg(ARC_REG_TLBINDEX,
SET_WAY_TO_IDX(mmu, set, way));
write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
pd0[way] = read_aux_reg(ARC_REG_TLBPD0);
- pd1[way] = read_aux_reg(ARC_REG_TLBPD1);
is_valid |= pd0[way] & _PAGE_PRESENT;
+ pd0[way] &= PAGE_MASK;
}
/* If all the WAYS in SET are empty, skip to next SET */
/* Scan the set for duplicate ways: needs a nested loop */
for (way = 0; way < mmu->ways - 1; way++) {
+
+ int n;
+
if (!pd0[way])
continue;
for (n = way + 1; n < mmu->ways; n++) {
- if ((pd0[way] & PAGE_MASK) ==
- (pd0[n] & PAGE_MASK)) {
-
- if (dup_pd_verbose) {
- pr_info("Duplicate PD's @"
- "[%d:%d]/[%d:%d]\n",
- set, way, set, n);
- pr_info("TLBPD0[%u]: %08x\n",
- way, pd0[way]);
- }
-
- /*
- * clear entry @way and not @n. This is
- * critical to our optimised loop
- */
- pd0[way] = pd1[way] = 0;
- write_aux_reg(ARC_REG_TLBINDEX,
+ if (pd0[way] != pd0[n])
+ continue;
+
+ if (!dup_pd_silent)
+ pr_info("Dup TLB PD0 %08x @ set %d ways %d,%d\n",
+ pd0[way], set, way, n);
+
+ /*
+ * clear entry @way and not @n.
+ * This is critical to our optimised loop
+ */
+ pd0[way] = 0;
+ write_aux_reg(ARC_REG_TLBINDEX,
SET_WAY_TO_IDX(mmu, set, way));
- __tlb_entry_erase();
- }
+ __tlb_entry_erase();
}
}
}
#endif
lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD
- ld.as r1, [r1, r0] ; PGD entry corresp to faulting addr
- and.f r1, r1, PAGE_MASK ; Ignoring protection and other flags
- ; contains Ptr to Page Table
- bz.d do_slow_path_pf ; if no Page Table, do page fault
+ ld.as r3, [r1, r0] ; PGD entry corresp to faulting addr
+ tst r3, r3
+ bz do_slow_path_pf ; if no Page Table, do page fault
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ and.f 0, r3, _PAGE_HW_SZ ; Is this Huge PMD (thp)
+ add2.nz r1, r1, r0
+ bnz.d 2f ; YES: PGD == PMD has THP PTE: stop pgd walk
+ mov.nz r0, r3
+
+#endif
+ and r1, r3, PAGE_MASK
; Get the PTE entry: The idea is
; (1) x = addr >> PAGE_SHIFT -> masks page-off bits from @fault-addr
; (2) y = x & (PTRS_PER_PTE - 1) -> to get index
- ; (3) z = pgtbl[y]
- ; To avoid the multiply by in end, we do the -2, <<2 below
+ ; (3) z = (pgtbl + y * 4)
+
+#ifdef CONFIG_ARC_HAS_PAE40
+#define PTE_SIZE_LOG 3 /* 8 == 2 ^ 3 */
+#else
+#define PTE_SIZE_LOG 2 /* 4 == 2 ^ 2 */
+#endif
+
+ ; multiply in step (3) above avoided by shifting lesser in step (1)
+ lsr r0, r2, ( PAGE_SHIFT - PTE_SIZE_LOG )
+ and r0, r0, ( (PTRS_PER_PTE - 1) << PTE_SIZE_LOG )
+ ld.aw r0, [r1, r0] ; r0: PTE (lower word only for PAE40)
+ ; r1: PTE ptr
+
+2:
- lsr r0, r2, (PAGE_SHIFT - 2)
- and r0, r0, ( (PTRS_PER_PTE - 1) << 2)
- ld.aw r0, [r1, r0] ; get PTE and PTE ptr for fault addr
#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
and.f 0, r0, _PAGE_PRESENT
bz 1f
;-----------------------------------------------------------------
; Convert Linux PTE entry into TLB entry
; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu
+; (for PAE40, two-words PTE, while three-word TLB Entry [PD0:PD1:PD1HI])
; IN: r0 = PTE, r1 = ptr to PTE
.macro CONV_PTE_TO_TLB
- and r3, r0, PTE_BITS_RWX ; r w x
- lsl r2, r3, 3 ; r w x 0 0 0 (GLOBAL, kernel only)
+ and r3, r0, PTE_BITS_RWX ; r w x
+ lsl r2, r3, 3 ; Kr Kw Kx 0 0 0 (GLOBAL, kernel only)
and.f 0, r0, _PAGE_GLOBAL
- or.z r2, r2, r3 ; r w x r w x (!GLOBAL, user page)
+ or.z r2, r2, r3 ; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page)
and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE
or r3, r3, r2
- sr r3, [ARC_REG_TLBPD1] ; these go in PD1
+ sr r3, [ARC_REG_TLBPD1] ; paddr[31..13] | Kr Kw Kx Ur Uw Ux | C
+#ifdef CONFIG_ARC_HAS_PAE40
+ ld r3, [r1, 4] ; paddr[39..32]
+ sr r3, [ARC_REG_TLBPD1HI]
+#endif
and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb
lr r3, [ecr]
or r0, r0, _PAGE_ACCESSED ; Accessed bit always
btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ?
- or.nz r0, r0, _PAGE_MODIFIED ; if Write, set Dirty bit as well
+ or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well
st_s r0, [r1] ; Write back PTE
CONV_PTE_TO_TLB
axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card");
axs10x_early_init();
-
-#ifdef CONFIG_ARC_MCIP
- /* No Hardware init, but filling the smp ops callbacks */
- mcip_init_early_smp();
-#endif
}
#endif
MACHINE_START(AXS103, "axs103")
.dt_compat = axs103_compat,
.init_early = axs103_early_init,
-#ifdef CONFIG_ARC_MCIP
- .init_smp = mcip_init_smp,
-#endif
MACHINE_END
/*
MACHINE_START(SIMULATION, "simulation")
.dt_compat = simulation_compat,
-#ifdef CONFIG_ARC_MCIP
- .init_early = mcip_init_early_smp,
- .init_smp = mcip_init_smp,
-#endif
MACHINE_END
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_SHMOBILE_LEGACY
- bool "Renesas ARM SoCs (non-multiplatform)"
- select ARCH_SHMOBILE
- select ARM_PATCH_PHYS_VIRT if MMU
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select MULTI_IRQ_HANDLER
- select NO_IOPORT_MAP
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM
- select SH_CLK_CPG
- select SPARSE_IRQ
- help
- Support for Renesas ARM SoC platforms using a non-multiplatform
- kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
- and RZ families.
-
config ARCH_RPC
bool "RiscPC"
+ depends on MMU
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
config HAVE_ARM_TWD
bool
- depends on SMP
select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
config VMSPLIT_3G
bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
config VMSPLIT_1G
default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
+ default 0xB0000000 if VMSPLIT_3G_OPT
default 0xC0000000
config NR_CPUS
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 128 if SOC_AT91RM9200
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem"
+ bool "Allocate 2nd-level pagetables from highmem" if EXPERT
depends on HIGHMEM
+ default y
help
The VM uses one page of physical memory for each page table.
For systems with a lot of processes, this can use a lot of
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
- range 11 64 if ARCH_SHMOBILE_LEGACY
+ int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111 || ARCH_EFM32
default "11"
0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config AT91_DEBUG_LL_DBGU0
- bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
- select DEBUG_AT91_UART
+ config DEBUG_AT91_UART
+ bool "Kernel low-level debugging on Atmel SoCs"
depends on ARCH_AT91
- depends on SOC_AT91RM9200 || SOC_AT91SAM9
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on atmel devices.
- config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_AT91SAM9 || SOC_SAMA5
+ SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
+ rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
+ 9261/9g10, 9rl
+ 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
+ sama5d4 0xfc00c000 0xfb00c000 USART3
+ sama5d4 0xfc069000 0xfb069000 DBGU
+ sama5d2 0xf8020000 0xf7020000 UART1
- config AT91_DEBUG_LL_DBGU2
- bool "Kernel low-level debugging on sama5d4"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
-
- config AT91_DEBUG_LL_DBGU3
- bool "Kernel low-level debugging on sama5d2"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
+ Please adjust DEBUG_UART_PHYS configuration options based on
+ your needs.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
endchoice
-config DEBUG_AT91_UART
- bool
- depends on ARCH_AT91
-
config DEBUG_EXYNOS_UART
bool
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
- ARCH_SHMOBILE_LEGACY
+ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default "mach/uncompress.h"
config EARLY_PRINTK
--- /dev/null
+next/fixes-non-critical
+ patch
+ ARM: cns3xxx: pci: avoid potential stack overflow
+ davinci/fixes
+ git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci tags/davinci-for-v4.4/fixes
+ patch
+ soc: ti: reset irq affinity before freeing irq
+ broadcom/maintainers
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/maintainers
+ patch
+ MAINTAINERS: update lpc18xx entry with more drivers
+
+next/cleanup
+ renesas/cleanup
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-cleanup-for-v4.4
+ efm32/cleanup
+ git://git.pengutronix.de/git/ukl/linux tags/efm32-for-4.4-rc1
+ mvebu/cleanup
+ git://git.infradead.org/linux-mvebu tags/mvebu-cleanup-4.4-1
+ omap/cleanup
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/cleanup-pt1
+ renesas/cleanup2
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-cleanup2-for-v4.4
+ patch
+ ARM: Remove open-coded version of IRQCHIP_DECLARE
+ ARM: Remove __ref on hotplug cpu die path
+ mvebu/cleanup2
+ git://git.infradead.org/linux-mvebu tags/mvebu-cleanup-4.4-2
+ pxa/for-4.4
+ https://github.com/rjarzmik/linux tags/pxa-for-4.4
+ omap/cleanup2
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/soc-clean-up
+
+next/soc
+ renesas/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-soc-for-v4.4
+ contains renesas/clk
+ at91/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 tags/at91-soc
+ patch
+ ARM: meson: Enable Meson8b SoCs
+ mvebu/soc
+ git://git.infradead.org/linux-mvebu tags/mvebu-soc-4.4-1
+ berlin/soc64
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin64-soc-for-4.4-1
+ berlin/soc
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-soc-for-4.4-1
+ broadcom/soc
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/soc
+ <no branch> (045016902bf7abeeb2a86fc9284c30dce228f055)
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-driver-soc_v2
+ patch
+ ARM: digicolor: select pinctrl/gpio driver
+ berlin/soc2
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-soc-for-4.4-2
+ sunxi/core
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-core-for-4.4
+ mediatek/soc
+ https://github.com/mbgg/linux-mediatek tags/v4.3-next-soc
+ imx/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-soc-4.4
+ at91/soc2
+ git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux tags/at91-ab-soc2
+ tegra/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-4.4-soc
+ mvebu/soc2
+ git://git.infradead.org/linux-mvebu tags/mvebu-soc-4.4-2
+ samsung/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-soc
+ patch
+ ARM: uniphier: add outer cache support
+ ARM: uniphier: rework SMP operations to use trampoline code
+
+next/boards
+
+next/dt
+ hisi/dt
+ git://github.com/hisilicon/linux-hisi tags/hip05-dt-for-4.3
+ st/dt
+ https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti tags/sti-dt-for-v4.4-1
+ at91/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 tags/at91-dt
+ xgene/dt
+ https://github.com/AppliedMicro/xgene-next tags/xgene-dts-for-v4.4-1
+ socfpga/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_dts_for_v4.4
+ patch
+ arm64: dts: add all hi6220 uart nodes
+ renesas/cleanup
+ Merge branch 'renesas/cleanup' into next/dt
+ renesas/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-dt-for-v4.4
+ patch
+ of: documentation: Add vendor prefix for Tronfy
+ of: documentation: add bindings documentation for Meson8b
+ ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
+ keystone/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-dts
+ rockchip/dts32
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-dts32-1
+ bcm/dt
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/devicetree
+ mvebu/dt
+ git://git.infradead.org/linux-mvebu tags/mvebu-dt-4.4-1
+ berlin/dt
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-dt-for-4.4-1
+ berlin/dt64
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin64-dt-for-4.4-1
+ lpc18xx/dt
+ https://github.com/manabian/linux-lpc tags/lpc18xx_dts_for_4.4
+ sunxi/dt
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-dt-for-4.4
+ patch
+ ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
+ hisi/dt2
+ git://github.com/hisilicon/linux-hisi tags/hisi-soc-dt-for-4.4
+ patch
+ ARM64: dts: vexpress: Use a symlink to vexpress-v2m-rs1.dtsi from arch=arm
+ samsung/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-dt-1
+ patch
+ ARM: dts: uniphier: change the external bus address mapping
+ renesas/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-dt2-for-v4.4
+ patch
+ ARM64: juno: add NOR flash to device tree
+ qcom/dt
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-dt-for-4.4
+ berlin/dt-cpuclk
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-dt-cpuclk-for-4.4-1
+ omap/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/dt-pt1
+ keystone/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-dts-part2
+ patch
+ ARM: digicolor: add pinctrl module device node
+ ARM: digicolor: dts: add uart pin configuration
+ juno/scpi
+ git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux tags/juno-scpi-for-v4.4
+ <no branch> (00a9e053da0b9e150b7f8fefa3c409d7e71ce48f)
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-arm64-for-4.4
+ socfpga/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_dts_for_v4.4_part_2
+ socfpga/dt-cleanup
+ git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_for_v4.4_cleanup
+ mvebu/dt2
+ git://git.infradead.org/linux-mvebu tags/mvebu-dt-4.4-2
+ sunxi/dt2
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-dt-for-4.4-2
+ rockchip/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-dts32-2
+ mediatek/dt
+ https://github.com/mbgg/linux-mediatek tags/v4.3-next-dts
+ imx/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-dt-4.4
+ contains depends/imx-clk
+ patch
+ ARM: dts: TI-Nspire: fix cpu compatible value
+ ARM: dts: WM8750: fix cpu compatible value
+ sti/dt2
+ https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti tags/sti-dt-for-v4.4-2
+ patch
+ ARM: dts: uniphier: use stdout-path instead of console
+ ARM: dts: uniphier: add ProXstream2 Gentil board support
+ ARM: dts: uniphier: add ProXstream2 Vodka board support
+ omap/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/dt-pt2
+ at91/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux tags/at91-ab-dt2
+ patch
+ arm64: Use generic Layerscape SoC family naming
+ arm64: Rename FSL LS2085A SoC support code to LS2080A
+ Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
+ Documentation/dts: Move FSL board-specific bindings out of /powerpc
+ doc/bindings: Update GPIO devicetree binding documentation for LS2080A
+ doc: DTS: Update DWC3 binding to provide reference to generic bindings
+ dts/ls2080a: Update DTSI to add support of various peripherals
+ dts/ls2080a: Remove text about writing to Free Software Foundation
+ dts/ls2080a: Update Simulator DTS to add support of various peripherals
+ dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
+ dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
+ tegra/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-4.4-dt
+ samsung/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-dt-2
+ patch
+ ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
+ broadcom/rpi-dt
+ https://github.com/Broadcom/stblinux tags/arm/soc/for-4.4/rpi-dt-v2
+ contains depends/clk-bcm2835
+ depends/sunxi-clocks
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-clocks-for-4.4
+ sunxi/dt3
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-dt-for-4.4-3
+ patch
+ ARM: dts: uniphier: add outer cache controller nodes
+ ARM64: juno: disable NOR flash node by default
+ ARM: dts: uniphier: add system-bus-controller nodes
+
+next/defconfig
+ renesas/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-defconfig-for-v4.4
+ broadcom/defconfig
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/defconfig
+ patch
+ ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs
+ ARM: multi_v7_defconfig: Enable common Rockchip devices/busses
+ ARM: multi_v7_defconfig: Enable common regulators for rockchip boards
+ ARM: multi_v7_defconfig: Enable Rockchip display support
+ ARM: multi_v7_defconfig: Enable the Rockchip USB 2.0 phy
+ ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards
+ keystone/config
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-config
+ patch
+ arm64: defconfig: Enable devices for MSM8916
+ ARM: configs: update lpc18xx defconfig
+ ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
+ ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
+ qcom/defconfig
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-defconfig-for-4.4
+ renesas/defconfig2
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-defconfig2-for-v4.4
+ socfpga/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_defconfig_for_v4.4
+ mvebu/config
+ git://git.infradead.org/linux-mvebu tags/mvebu-config-4.4-1
+ sunxi/defconfig
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-defconfig-for-4.4
+ imx/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-defconfig-4.4
+ at91/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux tags/at91-ab-defconfig
+ tegra/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-4.4-defconfig
+ samsung/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-defconfig
+ patch
+ ARM: multi_v7_defconfig: enable UniPhier I2C drivers
+
+next/drivers
+ renesas/clk
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-clk-for-v4.4
+ at91/drivers
+ git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux tags/at91-cleanup-4.4
+ rockchip/drivers
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-drivers1
+ drivers/scpi
+ git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux tags/arm-scpi-for-v4.4
+ drivers/pl172
+ https://github.com/manabian/linux-lpc tags/drivers_pl172_for_4.4
+ berlin/cpuclk
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-new-cpuclk-for-4.4-1
+ contains berlin/dt-cpuclk
+ qcom/soc
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-soc-for-4.4
+ patch
+ soc: qcom/smem: add HWSPINLOCK dependency
+ drivers/psci
+ git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux tags/firmware/psci-1.0
+ drivers/psci2
+ Merge branch 'drivers/psci2' into next/drivers
+ rockchip/drivers2
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-drivers2
+ patch
+ bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
+ bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
+ broadcom/rpi-drivers
+ https://github.com/Broadcom/stblinux tags/arm/soc/for-4.4/rpi-drivers
+ patch
+ soc: qcom: smd-rpm: Correct size of outgoing message
+
+next/arm64
+ mediatek/arm64
+ https://github.com/mbgg/linux-mediatek tags/v4.3-next-arm64
+ samsung/dt64
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-dt64
+ arm/juno-pcie
+ git://linux-arm.org/linux-ld for-upstream/juno-pcie
+
+next/late
+
+fixes
+ patch
+ ARM: dts: fix gpio-keys wakeup-source property
+ <no branch> (8f2279d5d908119a08e906be1c6b69c744d0c379)
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.3/fixes-rc7
+
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b.dtb \
- bcm2835-rpi-b-plus.dtb
+ bcm2835-rpi-b-rev2.dtb \
+ bcm2835-rpi-b-plus.dtb \
+ bcm2835-rpi-a-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+ bcm958625k.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-snow-rev5.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
+ exynos5422-odroidxu4.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
+dtb-$(CONFIG_MACH_MESON8B) += \
+ meson8b-mxq.dtb \
+ meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-hummingboard.dtb \
+ imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
imx6dl-rex-basic.dtb \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
+ imx6q-nitrogen6_max.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+ am335x-bonegreen.dtb \
am335x-sl50.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am437x-gp-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
+ omap5-igep0050.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
+ rk3288-popmetal.dtb \
rk3288-r89.dtb \
+ rk3288-rock2-square.dtb \
+ rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
- r8a7778-bockw.dtb \
- r8a7778-bockw-reference.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
+ r8a7791-porter.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet1.dtb \
sun4i-a10-inet97fv2.dtb \
- sun4i-a10-itead-iteaduino-plus.dts \
+ sun4i-a10-inet9f-rev03.dtb \
+ sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
- sun4i-a10-pcduino.dtb
+ sun4i-a10-pcduino.dtb \
+ sun4i-a10-pcduino2.dtb \
+ sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
+ sun5i-a10s-wobo-i5.dtb \
sun5i-a13-hsg-h702.dtb \
+ sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
- sun5i-a13-utoo-p66.dtb
+ sun5i-a13-q8-tablet.dtb \
+ sun5i-a13-utoo-p66.dtb \
+ sun5i-r8-chip.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
- sun6i-a31s-cs908.dtb
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-primo81.dtb \
+ sun6i-a31s-sina31s.dtb \
+ sun6i-a31s-sinovoip-bpi-m2.dtb \
+ sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapro.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-mk808c.dtb \
+ sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
- sun7i-a20-wexler-tab7200.dtb
+ sun7i-a20-wexler-tab7200.dtb \
+ sun7i-a20-wits-pro-a20-dkt.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-evb.dtb \
+ sun8i-a23-gt90h-v4.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb \
+ sun8i-a23-q8-tablet.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-sld3-ref.dtb \
- uniphier-ph1-sld8-ref.dtb
+ uniphier-ph1-sld8-ref.dtb \
+ uniphier-proxstream2-gentil.dtb \
+ uniphier-proxstream2-vodka.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
armada-370-rd.dtb \
+ armada-370-seagate-nas-2bay.dtb \
+ armada-370-seagate-nas-4bay.dtb \
+ armada-370-seagate-personal-cloud.dtb \
+ armada-370-seagate-personal-cloud-2bay.dtb \
armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
>;
};
};
bus-width = <0x4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&aes {
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone Green";
+ compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ uart2_pins: uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&sham {
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
- 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
>;
};
};
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
- compatible = "regulator-fixed";
+ regulators {
+ compatible = "simple-bus";
+
+ vcc5v: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
};
#include "tps65910.dtsi"
&tps {
- vcc1-supply = <&vbat>;
- vcc2-supply = <&vbat>;
- vcc3-supply = <&vbat>;
- vcc4-supply = <&vbat>;
- vcc5-supply = <&vbat>;
- vcc6-supply = <&vbat>;
- vcc7-supply = <&vbat>;
- vccio-supply = <&vbat>;
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
regulators {
vrtc_reg: regulator@0 {
};
};
-&vbat {
- regulator-name = "vbat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
-};
-
/* SPI Busses */
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+ regulators {
+ compatible = "simple-bus";
+
+ vcc3v3: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
};
/* CAN Busses */
};
&mmc1 {
- vmmc-supply = <&vmmc_reg>;
+ vmmc-supply = <&vcc3v3>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
>;
};
+ dcan0_sleep: dcan0_sleep_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ >;
+ };
+
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
>;
};
+ dcan1_sleep: dcan1_sleep_pins {
+ pinctrl-single,pins = <
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ >;
+ };
+
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ /*
+ * 0x264 represents the offset of padconf register of
+ * gpio3_22 from am43xx_pinmux base.
+ */
+ interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
+ <&am43xx_pinmux 0x264>;
+ interrupt-names = "tsc", "wakeup";
+
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
+ wakeup-source;
};
ov2659@30 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
/* eMMC sits on mmc2 */
};
&dcan0 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan0_default>;
+ pinctrl-1 = <&dcan0_sleep>;
status = "okay";
};
&dcan1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_default>;
+ pinctrl-1 = <&dcan1_sleep>;
status = "okay";
};
pinctrl-1 = <&mmc1_pins_sleep>;
vmmc-supply = <&v3_3d>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&qspi {
vmmc-supply = <&dcdc4>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&usb2_phy1 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd_fixed";
+ vin-supply = <&vdd_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
};
};
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "BeagleBoard-X15";
+ simple-audio-card,widgets =
+ "Line", "Line Out",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC2L", "Line In",
+ "MIC2R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3104>;
+ clocks = <&clkout2_clk>;
+ };
+ };
};
&dra7_pmx_core {
0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
+
+ clkout2_pins_default: clkout2_pins_default {
+ pinctrl-single,pins = <
+ 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
+ >;
+ };
+
+ clkout2_pins_sleep: clkout2_pins_sleep {
+ pinctrl-single,pins = <
+ 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3_pins_default {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3_pins_sleep {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT | MUX_MODE15)
+ 0x328 (PIN_INPUT | MUX_MODE15)
+ 0x32c (PIN_INPUT | MUX_MODE15)
+ 0x330 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
};
&i2c1 {
/* SMPS9 unused */
ldo1_reg: ldo1 {
- /* VDD_SD */
+ /* VDD_SD / VDDSHV8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo2_reg: ldo2 {
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
+
+ tlv320aic3104: tlv320aic3104@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3104";
+ reg = <0x18>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&clkout2_pins_default>;
+ pinctrl-1 = <&clkout2_pins_sleep>;
+ status = "okay";
+ adc-settle-ms = <40>;
+
+ AVDD-supply = <&vdd_3v3>;
+ IOVDD-supply = <&vdd_3v3>;
+ DRVDD-supply = <&vdd_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c3 {
vmmc-supply = <&ldo1_reg>;
bus-width = <4>;
- cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
&pcie1 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
serial@12000 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
phy-mode = "rgmii-id";
};
+ crypto@90000 {
+ status = "okay";
+ };
+
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
};
internal-regs {
+
+ /* RTC is provided by Intersil ISL12057 I2C RTC chip */
+ rtc@10300 {
+ status = "disabled";
+ };
+
serial@12000 {
status = "okay";
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
};
internal-regs {
+
+ /* RTC is provided by Intersil ISL12057 I2C RTC chip */
+ rtc@10300 {
+ status = "disabled";
+ };
+
serial@12000 {
status = "okay";
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
--- /dev/null
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate NAS 2-Bay
+ * Code name (board/PCB) : Dart 2-Bay
+ * Model name (case sticker) : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+ model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+ compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+ gpio-fan {
+ gpio-fan,speed-map =
+ < 0 3
+ 950 2
+ 1400 1
+ 1800 0>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate NAS 4-Bay
+ * Code name (board/PCB) : Dart 4-Bay
+ * Model name (case sticker) : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+ model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+ compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+ soc {
+ pcie-controller {
+ /* SATA AHCI controller 88SE9170 */
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ i2c@11000 {
+ /* I2C GPIO expander (PCA9554A) */
+ pca9554: pca9554@21 {
+ compatible = "nxp,pca9554";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
+ };
+
+ regulators {
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "SATA2 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+ };
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "SATA3 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ red-sata2 {
+ label = "dart:red:sata2";
+ gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+ };
+ red-sata3 {
+ label = "dart:red:sata3";
+ gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds-ns2 {
+ compatible = "lacie,ns2-leds";
+
+ white-sata2 {
+ label = "dart:white:sata2";
+ cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+ slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+ num-modes = <4>;
+ modes-map = <NS_V2_LED_SATA 0 0
+ NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 1 1>;
+ };
+ white-sata3 {
+ label = "dart:white:sata3";
+ cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+ slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+ num-modes = <4>;
+ modes-map = <NS_V2_LED_SATA 0 0
+ NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 1 1>;
+ };
+ };
+
+ gpio-fan {
+ gpio-fan,speed-map =
+ < 0 3
+ 800 2
+ 1050 1
+ 1300 0>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* USB 3.0 bridge ASM1042A */
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+
+ mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <100000>;
+
+ /* RTC - NXP 8563T (second source) */
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ interrupts = <110>;
+ };
+ /* RTC - MCP7940NT */
+ rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ interrupts = <110>;
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x300000>;
+ };
+ partition@300000 {
+ label = "device-tree";
+ reg = <0x300000 0x20000>;
+ };
+ partition@320000 {
+ label = "linux";
+ reg = <0x320000 0x2000000>;
+ };
+ partition@2320000 {
+ label = "rootfs";
+ reg = <0x2320000 0xdce0000>;
+ };
+ };
+ };
+
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA0 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+ &gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ button@2 {
+ label = "Backup button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ button@3 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ white-power {
+ label = "dart:white:power";
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+
+ };
+ red-power {
+ label = "dart:red:power";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ };
+ red-sata0 {
+ label = "dart:red:sata0";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ red-sata1 {
+ label = "dart:red:sata1";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+ pinctrl-names = "default";
+
+ hdd0_led_sata_pin: hdd0-led-sata-pin {
+ marvell,pins = "mpp48";
+ marvell,function = "sata1";
+ };
+ hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ hdd1_led_sata_pin: hdd1-led-sata-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "sata0";
+ };
+ hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB) : Cumulus Max
+ * Model name (case sticker) : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+ model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+ compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+ soc {
+ internal-regs {
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+ };
+
+ regulators {
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate Personal Cloud
+ * Code name (board/PCB) : Cumulus
+ * Model name (case sticker) : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+ model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+ compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+ soc {
+ internal-regs {
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* USB 3.0 Bridge ASM1042A */
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ coherency-fabric@20200 {
+ broken-idle;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* MX25L8006E */
+ compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
+ };
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA0 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <100>;
+ };
+ button@2 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ button@3 {
+ label = "USB VBUS error";
+ linux,code = <KEY_UNKNOWN>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-sata0 {
+ label = "cumulus:red:sata0";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&sata_led_pin>;
+ pinctrl-names = "default";
+
+ sata_led_pin: sata-led-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "sata0";
+ };
+ gpio_led_pin: gpio-led-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
reg = <0x20800 0x8>;
};
+ cpu-config@21000 {
+ compatible = "marvell,armada-370-cpu-config";
+ reg = <0x21000 0x8>;
+ };
+
audio_controller: audio-controller@30000 {
#sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
ethernet@74000 {
compatible = "marvell,armada-370-neta";
};
+
+ crypto@90000 {
+ compatible = "marvell,armada-370-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <48>;
+ clocks = <&gateclk 23>;
+ clock-names = "cesa0";
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x7e0>;
+ };
+ };
+
+ crypto_sram: sa-sram {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+ reg-names = "sram";
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+ /*
+ * The Armada 370 has an erratum preventing the use of
+ * the standard workflow for CPU idle support (relying
+ * on the BootROM code to enter/exit idle state).
+ * Reserve some amount of the crypto SRAM to put the
+ * cpuidle workaround.
+ */
+ idle-sram@0 {
+ reg = <0x0 0x20>;
+ };
};
};
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
};
};
+ crypto@90000 {
+ compatible = "marvell,armada-375-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 30>, <&gateclk 31>,
+ <&gateclk 28>, <&gateclk 29>;
+ clock-names = "cesa0", "cesa1",
+ "cesaz0", "cesaz1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
sata@a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x5000>;
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 31>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
};
};
/ {
model = "Marvell Armada 385 Access Point Development Board";
- compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial1:115200n8";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi1: spi@10680 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
sdhci@d8000 {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
- cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
no-1-8-v;
+ /*
+ * A388-GP board v1.5 and higher replace
+ * hitherto card detection method based on GPIO
+ * with the one using DAT3 pin. As they are
+ * incompatible, software-based polling is
+ * enabled with 'broken-cd' property. For boards
+ * older than v1.5 it can be replaced with:
+ * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+ * whereas for the newer ones following can be
+ * used instead:
+ * 'dat3-cd;'
+ * 'cd-inverted;'
+ */
+ broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
clocks = <&gateclk 4>;
};
+ crypto@90000 {
+ compatible = "marvell,armada-38x-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 23>, <&gateclk 21>,
+ <&gateclk 14>, <&gateclk 16>;
+ clock-names = "cesa0", "cesa1",
+ "cesaz0", "cesaz1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
status = "disabled";
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+ clocks = <&gateclk 21>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+ };
};
clocks {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
internal-regs {
serial@12000 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
};
internal-regs {
- /* Two rear eSATA ports */
- sata@a0000 {
- nr-ports = <2>;
- status = "okay";
- };
-
- serial@12000 {
- status = "okay";
- };
-
- mdio {
- phy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 { /* Marvell 88E1318 */
- reg = <1>;
- };
- };
-
- ethernet@70000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
- ethernet@74000 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
- };
-
- /* Front USB 2.0 port */
- usb@50000 {
- status = "okay";
+ /* RTC is provided by Intersil ISL12057 I2C RTC chip */
+ rtc@10300 {
+ status = "disabled";
};
i2c@11000 {
clock-frequency = <400000>;
status = "okay";
- isl12057: isl12057@68 {
- compatible = "isil,isl12057";
- reg = <0x68>;
- isil,irq2-can-wakeup-machine;
- };
-
/* Controller for rear fan #1 of 3 (Protechnic
* MGT4012XB-O20, 8000RPM) near eSATA port */
g762_fan1: g762@3e {
compatible = "gmt,g751";
reg = <0x4c>;
};
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ /* Two rear eSATA ports */
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
};
nand@d0000 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
reg = <0x20800 0x20>;
};
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
+
eth2: ethernet@30000 {
compatible = "marvell,armada-xp-neta";
reg = <0x30000 0x4000>;
compatible = "marvell,armada-xp-neta";
};
+ crypto@90000 {
+ compatible = "marvell,armada-xp-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <48>, <49>;
+ clocks = <&gateclk 23>, <&gateclk 23>;
+ clock-names = "cesa0", "cesa1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
};
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
};
clocks {
*/
/dts-v1/;
#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
/ {
model = "Atmel SAMA5D2 Xplained";
apb {
spi0: spi@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
};
macb0: ethernet@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
status = "okay";
};
uart1: serial@f8020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
status = "okay";
};
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ active-semi,vsel-high;
+ status = "okay";
+
+ regulators {
+ vdd_1v35_reg: DCDC_REG1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd_1v2_reg: DCDC_REG2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: DCDC_REG3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_fuse_reg: LDO_REG1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_lp_reg: LDO_REG2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_led_reg: LDO_REG3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sdhc_1v8_reg: LDO_REG4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
};
uart3: serial@fc008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
at24@54 {
pagesize = <16>;
};
};
+
+ pinctrl@fc038000 {
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PD4__TWD1>,
+ <PIN_PD5__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_default: macb0_default {
+ pinmux = <PIN_PB14__GTXCK>,
+ <PIN_PB15__GTXEN>,
+ <PIN_PB16__GRXDV>,
+ <PIN_PB17__GRXER>,
+ <PIN_PB18__GRX0>,
+ <PIN_PB19__GRX1>,
+ <PIN_PB20__GTX0>,
+ <PIN_PB21__GTX1>,
+ <PIN_PB22__GMDC>,
+ <PIN_PB23__GMDIO>;
+ bias-disable;
+ };
+
+ pinctrl_spi0_default: spi0_default {
+ pinmux = <PIN_PA14__SPI0_SPCK>,
+ <PIN_PA15__SPI0_MOSI>,
+ <PIN_PA16__SPI0_MISO>,
+ <PIN_PA17__SPI0_NPCS0>;
+ bias-disable;
+ };
+
+ pinctrl_uart1_default: uart1_default {
+ pinmux = <PIN_PD2__URXD1>,
+ <PIN_PD3__UTXD1>;
+ bias-disable;
+ };
+
+ pinctrl_uart3_default: uart3_default {
+ pinmux = <PIN_PB11__URXD3>,
+ <PIN_PB12__UTXD3>;
+ bias-disable;
+ };
+ };
};
};
};
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
- status = "okay";
+ status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {
d8 {
label = "d8";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
- status = "disabled";
+ default-state = "on";
};
d10 {
clocks = <&pck2>;
clock-names = "mclk";
};
+
+ qt1070:keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioE>;
+ interrupts = <25 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+
+ atmel_mxt_ts@4c {
+ compatible = "atmel,atmel_mxt_ts";
+ reg = <0x4c>;
+ interrupt-parent = <&pioE>;
+ interrupts = <24 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mxt_ts>;
+ };
};
macb0: ethernet@f8020000 {
atmel,pins =
<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
};
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_mxt_ts: mxt_irq {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
};
};
};
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
ssc1: ssc@fffd4000 {
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
ssc2: ssc@fffd8000 {
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
clocks = <&ssc2_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
macb0: ethernet@fffbc000 {
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9260-pmc";
+ compatible = "atmel,at91sam9260-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9n12-pmc";
+ compatible = "atmel,at91sam9n12-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
};
};
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
mmc0: mmc@f0008000 {
pinctrl-0 = <
&pinctrl_board_mmc0
};
d9 {
- label = "d6";
+ label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
d10 {
- label = "d7";
+ label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <5000000>;
+ clock-frequency = <1000000>;
};
};
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9x5-pmc";
+ compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
+ atmel,adc-sample-hold-time = <11>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
};
};
+ adc0: adc@f804c000 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
pinctrl@fffff400 {
camera_sensor {
pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
regulator-name = "ldo5";
};
};
+
+ usb_power_supply: usb_power_supply {
+ compatible = "x-powers,axp202-usb-power-supply";
+ status = "disabled";
+ };
};
--- /dev/null
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ /* Default work frequency for buck regulators */
+ x-powers,dcdc-freq = <3000>;
+
+ reg_dcdc1: dcdc1 {
+ regulator-name = "dcdc1";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-name = "dcdc2";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-name = "dcdc3";
+ };
+
+ reg_dcdc4: dcdc4 {
+ regulator-name = "dcdc4";
+ };
+
+ reg_dcdc5: dcdc5 {
+ regulator-name = "dcdc5";
+ };
+
+ reg_dc1sw: dc1sw {
+ regulator-name = "dc1sw";
+ };
+
+ reg_dc5ldo: dc5ldo {
+ regulator-name = "dc5ldo";
+ };
+
+ reg_aldo1: aldo1 {
+ regulator-name = "aldo1";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-name = "aldo2";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-name = "aldo3";
+ };
+
+ reg_dldo1: dldo1 {
+ regulator-name = "dldo1";
+ };
+
+ reg_dldo2: dldo2 {
+ regulator-name = "dldo2";
+ };
+
+ reg_dldo3: dldo3 {
+ regulator-name = "dldo3";
+ };
+
+ reg_dldo4: dldo4 {
+ regulator-name = "dldo4";
+ };
+
+ reg_eldo1: eldo1 {
+ regulator-name = "eldo1";
+ };
+
+ reg_eldo2: eldo2 {
+ regulator-name = "eldo2";
+ };
+
+ reg_eldo3: eldo3 {
+ regulator-name = "eldo3";
+ };
+
+ reg_ldo_io0: ldo_io0 {
+ regulator-name = "ldo_io0";
+ };
+
+ reg_ldo_io1: ldo_io1 {
+ regulator-name = "ldo_io1";
+ };
+
+ reg_rtc_ldo: rtc_ldo {
+ /* RTC_LDO is a fixed, always-on regulator */
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "rtc_ldo";
+ };
+ };
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
#include "skeleton.dtsi"
/include/ "bcm-cygnus-clock.dtsi"
- pinctrl: pinctrl@0x0301d0c8 {
- compatible = "brcm,cygnus-pinmux";
- reg = <0x0301d0c8 0x30>,
- <0x0301d24c 0x2c>;
- };
-
- gpio_crmu: gpio@03024800 {
- compatible = "brcm,cygnus-crmu-gpio";
- reg = <0x03024800 0x50>,
- <0x03024008 0x18>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- gpio_ccm: gpio@1800a000 {
- compatible = "brcm,cygnus-ccm-gpio";
- reg = <0x1800a000 0x50>,
- <0x0301d164 0x20>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- };
+ core {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpio_asiu: gpio@180a5000 {
- compatible = "brcm,cygnus-asiu-gpio";
- reg = <0x180a5000 0x668>;
- #gpio-cells = <2>;
- gpio-controller;
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
- pinmux = <&pinctrl>;
+ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
- interrupt-controller;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
- amba {
+ axi {
+ compatible = "simple-bus";
+ ranges;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "arm,amba-bus", "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
- wdt@18009000 {
- compatible = "arm,sp805" , "arm,primecell";
- reg = <0x18009000 0x1000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ pinctrl: pinctrl@0x0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x30>,
+ <0x0301d24c 0x2c>;
};
- };
- i2c0: i2c@18008000 {
- compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
- reg = <0x18008000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
+ gpio_crmu: gpio@03024800 {
+ compatible = "brcm,cygnus-crmu-gpio";
+ reg = <0x03024800 0x50>,
+ <0x03024008 0x18>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
- i2c1: i2c@1800b000 {
- compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
- reg = <0x1800b000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
+ i2c0: i2c@18008000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x18008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
- pcie0: pcie@18012000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18012000 0x1000>;
+ wdt0: wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
- linux,pci-domain = <0>;
+ i2c1: i2c@1800b000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x1800b000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
- bus-range = <0x00 0xff>;
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x28000000 0 0x00010000
- 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
- status = "disabled";
- };
+ linux,pci-domain = <0>;
- pcie1: pcie@18013000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18013000 0x1000>;
+ bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
- linux,pci-domain = <1>;
+ status = "disabled";
+ };
- bus-range = <0x00 0xff>;
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x48000000 0 0x00010000
- 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
- status = "disabled";
- };
+ linux,pci-domain = <1>;
- uart0: serial@18020000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18020000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ bus-range = <0x00 0xff>;
- uart1: serial@18021000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18021000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
- uart2: serial@18022000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18020000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ status = "disabled";
+ };
- uart3: serial@18023000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18023000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- nand: nand@18046000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
- reg-names = "nand", "iproc-idm", "iproc-ext";
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ uart1: serial@18021000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18021000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ uart2: serial@18022000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- brcm,nand-has-wp;
- };
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- gic: interrupt-controller@19021000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x19021000 0x1000>,
- <0x19020100 0x100>;
- };
+ nand: nand@18046000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+ <0x18046f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x19022000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- timer@19020200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x19020200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- };
+ brcm,nand-has-wp;
+ };
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinmux = <&pinctrl>;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ touchscreen: tsc@180a6000 {
+ compatible = "brcm,iproc-touchscreen";
+ reg = <0x180a6000 0x40>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,nsp";
+ model = "Broadcom Northstar Plus SoC";
+ interrupt-parent = <&gic>;
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19020000 0x00003000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x2000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x0100 0x100>;
+ };
+
+ timer@19020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x0200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@18000300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <62499840>;
+ status = "disabled";
+ };
+
+ uart1: serial@18000400 {
+ compatible = "ns16550a";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <62499840>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+#include "bcm2835-rpi.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+ model = "Raspberry Pi Model A+";
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&gpio 35 0>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+ /* I2S interface */
+ i2s_alt0: i2s_alt0 {
+ brcm,pins = <18 19 20 21>;
+ brcm,function = <BCM2835_FSEL_ALT0>;
+ };
+};
--- /dev/null
+/dts-v1/;
+#include "bcm2835-rpi.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+ model = "Raspberry Pi Model B rev2";
+
+ leds {
+ act {
+ gpios = <&gpio 16 1>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+ /* I2S interface */
+ i2s_alt2: i2s_alt2 {
+ brcm,pins = <28 29 30 31>;
+ brcm,function = <BCM2835_FSEL_ALT2>;
+ };
+};
};
&gpio {
- pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
-
- /* I2S interface */
- i2s_alt2: i2s_alt2 {
- brcm,pins = <28 29 30 31>;
- brcm,function = <BCM2835_FSEL_ALT2>;
- };
+ pinctrl-0 = <&gpioout &alt0 &alt3>;
};
clock-frequency = <100000>;
};
+&i2c2 {
+ status = "okay";
+};
+
&sdhci {
status = "okay";
bus-width = <4>;
#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
#include "skeleton.dtsi"
/ {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ /* This could be a reference to BCM2835_CLOCK_TIMER,
+ * but we don't have the driver using the common clock
+ * support yet.
+ */
clock-frequency = <1000000>;
};
reg = <0x7e100000 0x28>;
};
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+
+ /* CPRMAN derives everything from the platform's
+ * oscillator.
+ */
+ clocks = <&clk_osc>;
+ };
+
rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
#interrupt-cells = <2>;
};
- uart@7e201000 {
+ uart0: uart@7e201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
- clock-frequency = <3000000>;
+ clocks = <&clocks BCM2835_CLOCK_UART>,
+ <&clocks BCM2835_CLOCK_VPU>;
+ clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
};
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
- clocks = <&clk_spi>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
- clocks = <&clk_i2c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
- clocks = <&clk_mmc>;
+ clocks = <&clocks BCM2835_CLOCK_EMMC>;
status = "disabled";
};
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
- clocks = <&clk_i2c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7e805000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e805000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clk_mmc: clock@0 {
+ /* The oscillator is the root of the clock tree. */
+ clk_osc: clock@3 {
compatible = "fixed-clock";
- reg = <0>;
+ reg = <3>;
#clock-cells = <0>;
- clock-output-names = "mmc";
- clock-frequency = <100000000>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
};
- clk_i2c: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-output-names = "i2c";
- clock-frequency = <250000000>;
- };
-
- clk_spi: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-output-names = "spi";
- clock-frequency = <250000000>;
- };
};
};
reg = <0x00000000 0x08000000>;
};
+ axi@18000000 {
+ usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Netgear R7000";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:white:5ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
brcm,irq-can-wake;
};
+ aon-ctrl@410000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x410000 0x200>, <0x410200 0x400>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
nand: nand@3e2800 {
status = "disabled";
#address-cells = <1>;
};
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf1100000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+
+ memc@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+
+ memc@2 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x100000 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+ };
+
+ sram@ffe00000 {
+ compatible = "brcm,boot-sram", "mmio-sram";
+ reg = <0x0 0xffe00000 0x0 0x10000>;
+ };
+
smpboot {
compatible = "brcm,brcmstb-smpboot";
syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
compatible = "brcm,bcm11360", "brcm,cygnus";
- aliases {
- serial0 = &uart3;
- };
-
chosen {
stdout-path = &uart3;
bootargs = "console=ttyS0,115200";
};
- uart3: serial@18023000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
};
};
};
+
+&uart3 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+};
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- uart3: serial@18023000 {
- status = "okay";
- };
+&uart3 {
+ status = "okay";
};
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
/ {
model = "Cygnus SVK (BCM958300K)";
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- pcie0: pcie@18012000 {
- status = "okay";
- };
+&pcie0 {
+ status = "okay";
+};
- pcie1: pcie@18013000 {
- status = "okay";
- };
+&pcie1 {
+ status = "okay";
+};
- uart3: serial@18023000 {
- status = "okay";
- };
+&uart3 {
+ status = "okay";
+};
- nand: nand@18046000 {
- nandcs@1 {
- compatible = "brcm,nandcs";
- reg = <0>;
- nand-on-flash-bbt;
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- nand-ecc-strength = <24>;
- nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
- brcm,nand-oob-sector-size = <27>;
- };
+ brcm,nand-oob-sector-size = <27>;
};
};
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
/ {
model = "Cygnus Wireless Audio (BCM958305K)";
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
- uart3: serial@18023000 {
- status = "okay";
+ brcm,nand-oob-sector-size = <27>;
};
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+ model = "NorthStar Plus SVK (BCM958625K)";
+ compatible = "brcm,bcm58625", "brcm,nsp";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ status = "okay";
+};
compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
model = "Marvell Armada 1500 (BG2) SoC";
compatible = "marvell,berlin2", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@1 {
};
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
model = "Marvell Armada 1500-mini (BG2CD) SoC";
compatible = "marvell,berlin2cd", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
status = "disabled";
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
};
choosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
regulators {
model = "Marvell Armada 1500 pro (BG2-Q) SoC";
compatible = "marvell,berlin2q", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@1 {
};
usb_phy2: phy@a2f400 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 14>;
};
usb_phy0: phy@b74000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 12>;
};
usb_phy1: phy@b78000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 13>;
status = "disabled";
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
timeout-sec = <15>;
};
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
uc_regs: syscon@f00003a0 {
compatible = "cnxt,cx92755-uc", "syscon";
reg = <0xf00003a0 0x10>;
&uart0 {
status = "okay";
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
};
&i2c {
status = "okay";
};
+
+&pinctrl {
+ uart0_default: uart0_active {
+ pins = "GP_O0", "GP_O1";
+ function = "client_b";
+ };
+};
};
crypto: crypto-engine@30000 {
- compatible = "marvell,orion-crypto";
- reg = <0x30000 0x10000>,
- <0xffffe000 0x800>;
- reg-names = "regs", "sram";
+ compatible = "marvell,dove-crypto";
+ reg = <0x30000 0x10000>;
+ reg-names = "regs";
interrupts = <31>;
clocks = <&gate_clk 15>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
status = "okay";
};
interrupts = <47>;
status = "disabled";
};
+
+ crypto_sram: sa-sram@ffffe000 {
+ compatible = "mmio-sram";
+ reg = <0xffffe000 0x800>;
+ clocks = <&gate_clk 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
};
};
#include "dra74x.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
/ {
model = "TI DRA742";
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
- mmc2_3v3: fixedregulator-mmc2 {
+ evm_3v3_sw: fixedregulator-evm_3v3_sw {
compatible = "regulator-fixed";
- regulator-name = "mmc2_3v3";
+ regulator-name = "evm_3v3_sw";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "dra7:usr1";
+ gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "dra7:usr2";
+ gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "dra7:usr3";
+ gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "dra7:usr4";
+ gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ USER1 {
+ label = "btnUser1";
+ linux,code = <BTN_0>;
+ gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+ };
+
+ USER2 {
+ label = "btnUser2";
+ linux,code = <BTN_1>;
+ gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&dra7_pmx_core {
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
+
+ atl_pins: pinmux_atl_pins {
+ pinctrl-single,pins = <
+ 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ >;
+ };
+
+ mcasp3_pins: pinmux_mcasp3_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ pinctrl-single,pins = <
+ 0x324 (MUX_MODE15)
+ 0x328 (MUX_MODE15)
+ 0x32c (MUX_MODE15)
+ 0x330 (MUX_MODE15)
+ >;
+ };
};
&i2c1 {
};
};
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
reg = <0x21>;
#interrupt-cells = <2>;
};
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
+
+ pcf_hdmi: gpio@26 {
+ compatible = "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
};
&i2c3 {
* SDCD signal is not being used here - using the fact that GPIO mode
* is always hardwired.
*/
- cd-gpios = <&gpio6 27 0>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
};
&mmc2 {
status = "okay";
- vmmc-supply = <&mmc2_3v3>;
+ vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
};
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
+
+&atl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&atl_pins>;
+
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins>;
+ pinctrl-1 = <&mcasp3_sleep_pins>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
#thermal-sensor-cells = <1>;
};
+ dsp1_system: dsp_system@40d00000 {
+ compatible = "syscon";
+ reg = <0x40d00000 0x100>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
status = "disabled";
};
+ mmu0_dsp1: mmu@40d01000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d01000 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp1: mmu@40d02000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d02000 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ status = "disabled";
+ };
+
+ mmu_ipu1: mmu@58882000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x58882000 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu1";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
+ mmu_ipu2: mmu@55082000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x55082000 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu2";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
status = "disabled";
};
+ mcasp3: mcasp@48468000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp3";
+ reg = <0x48468000 0x2000>;
+ reg-names = "mpu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp3_ahclkx_mux>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
/ {
model = "TI DRA722";
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
};
};
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
};
&dra7_pmx_core {
>;
};
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
nand_default: nand_default {
pinctrl-single,pins = <
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
+
+ atl_pins: pinmux_atl_pins {
+ pinctrl-single,pins = <
+ 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ >;
+ };
+
+ mcasp3_pins: pinmux_mcasp3_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ >;
+ };
};
&i2c1 {
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
+ };
- cpsw_sel_s0 {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_HIGH>;
- output-low;
- };
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3>;
+ IOVDD-supply = <&evm_3v3>;
+ DRVDD-supply = <&evm_3v3>;
+ DVDD-supply = <&aic_dvdd>;
};
};
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
*/
lines-initial-states = <0x0f2b>;
+
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
};
};
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
- cd-gpios = <&gpio6 27 0>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
max-frequency = <192000000>;
};
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
slaves = <1>;
+ mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
};
&cpsw_emac0 {
};
};
};
+
+&atl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&atl_pins>;
+
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins>;
+ pinctrl-1 = <&mcasp3_sleep_pins>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+};
<&dss_video1_clk>;
clock-names = "fck", "video1_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+};
};
ocp {
+ dsp2_system: dsp_system@41500000 {
+ compatible = "syscon";
+ reg = <0x41500000 0x100>;
+ };
+
omap_dwc3_4: omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
dr_mode = "otg";
};
};
+
+ mmu0_dsp2: mmu@41501000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41501000 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp2: mmu@41502000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41502000 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ status = "disabled";
+ };
};
};
<&dss_video2_clk>;
clock-names = "fck", "video1_clk", "video2_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
};
i2c@4000a000 {
- efm32,location = <3>;
+ energymicro,location = <3>;
status = "ok";
temp@48 {
spi0: spi@4000c000 { /* USART0 */
cs-gpios = <&gpio 68 1>; // E4
- location = <1>;
+ energymicro,location = <1>;
status = "ok";
microsd@0 {
spi1: spi@4000c400 { /* USART1 */
cs-gpios = <&gpio 51 1>; // D3
- location = <1>;
+ energymicro,location = <1>;
status = "ok";
ks8851@0 {
};
uart4: uart@4000e400 { /* UART1 */
- location = <2>;
+ energymicro,location = <2>;
status = "ok";
};
soc {
adc: adc@40002000 {
- compatible = "efm32,adc";
+ compatible = "energymicro,efm32-adc";
reg = <0x40002000 0x400>;
interrupts = <7>;
clocks = <&cmu clk_HFPERCLKADC0>;
};
gpio: gpio@40006000 {
- compatible = "efm32,gpio";
+ compatible = "energymicro,efm32-gpio";
reg = <0x40006000 0x1000>;
interrupts = <1 11>;
gpio-controller;
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
i2c1: i2c@4000a400 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a400 0x400>;
interrupts = <10>;
clocks = <&cmu clk_HFPERCLKI2C1>;
spi0: spi@4000c000 { /* USART0 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
spi2: spi@4000c800 { /* USART2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
};
uart0: uart@4000c000 { /* USART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
};
uart1: uart@4000c400 { /* USART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
};
uart2: uart@4000c800 { /* USART2 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
};
uart3: uart@4000e000 { /* UART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e000 0x400>;
interrupts = <20 21>;
clocks = <&cmu clk_HFPERCLKUART0>;
};
uart4: uart@4000e400 { /* UART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e400 0x400>;
interrupts = <22 23>;
clocks = <&cmu clk_HFPERCLKUART1>;
};
timer0: timer@40010000 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010000 0x400>;
interrupts = <2>;
clocks = <&cmu clk_HFPERCLKTIMER0>;
};
timer1: timer@40010400 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010400 0x400>;
interrupts = <12>;
clocks = <&cmu clk_HFPERCLKTIMER1>;
};
timer2: timer@40010800 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010800 0x400>;
interrupts = <13>;
clocks = <&cmu clk_HFPERCLKTIMER2>;
};
timer3: timer@40010c00 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010c00 0x400>;
interrupts = <14>;
clocks = <&cmu clk_HFPERCLKTIMER3>;
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-4";
linux,code = <KEY_4>;
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
regulator-name = "V_EMMC_2.8V-fixed";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
};
&exynos_usbphy {
+ vbus-supply = <&safeout_reg>;
status = "okay";
};
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
&exynos_usbphy {
status = "okay";
+ vbus-supply = <&safeout_reg>;
};
&hsotg {
reg = <0>;
vdd3-supply = <&ldo16_reg>;
vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 0>;
- te-gpios = <&gpx0 6 0>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
};
mshc_0: mshc@12510000 {
- compatible = "samsung,exynos5250-dw-mshc";
+ compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12510000 0x1000>;
interrupts = <0 142 0>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
};
mshc_1: mshc@12520000 {
- compatible = "samsung,exynos5250-dw-mshc";
+ compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12520000 0x1000>;
interrupts = <0 143 0>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
reg = <0x10000000 0x100>;
};
+ sromc@12570000 {
+ compatible = "samsung,exynos-srom";
+ reg = <0x12570000 0x10>;
+ };
+
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
interrupts = <0 52 0>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma0 15>, <&pdma0 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 53 0>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma1 15>, <&pdma1 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 54 0>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma0 17>, <&pdma0 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 55 0>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma1 17>, <&pdma1 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 0>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
up {
label = "Up";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "Down";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "Back";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
home {
label = "Home";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
menu {
label = "Menu";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
leds {
compatible = "gpio-leds";
status {
- gpios = <&gpx1 3 1>;
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
};
&spi_2 {
- cs-gpios = <&gpc1 2 0>;
+ cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
status = "okay";
w25x80@0 {
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats based on Exynos4210";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 0>;
+ gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 0>;
+ gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 0>;
+ gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 0>;
+ gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 0>;
+ gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
compatible = "gpio-keys";
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <10>;
compatible = "samsung,s6e8aa0";
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
&exynos_usbphy {
status = "okay";
+ vbus-supply = <&safe1_sreg>;
};
&fimd {
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>,
- <&gpl0 0 0>;
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>,
+ <&gpl0 0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
safe1_sreg: ESAFEOUT1 {
regulator-name = "SAFEOUT1";
- regulator-always-on;
};
safe2_sreg: ESAFEOUT2 {
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
regulator-name = "VMEM_VDD_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe1 3 0>;
+ gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
compatible = "gpio-keys";
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <1>;
};
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <1>;
};
config-key {
- gpios = <&gpx2 2 1>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <171>;
label = "config";
debounce-interval = <1>;
};
camera-key {
- gpios = <&gpx2 3 1>;
+ gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
linux,code = <212>;
label = "camera";
debounce-interval = <1>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <1>;
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <1>;
regulator-name = "TSP_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 3 0>;
+ gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpy3 1 0>;
- gpio-mosi = <&gpy3 3 0>;
+ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- cs-gpios = <&gpy4 3 0>;
+ cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
lcd@0 {
compatible = "samsung,ld9040";
reg = <0>;
vdd3-supply = <&ldo7_reg>;
vci-supply = <&ldo17_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <1200000>;
spi-cpol;
spi-cpha;
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpe0 1 0>;
+ gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
- gpios = <&gpe4 2 0 &gpe4 3 0>;
+ gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
&exynos_usbphy {
status = "okay";
+ vbus-supply = <&safeout1_reg>;
};
&fimd {
};
&hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
compatible = "maxim,max8952";
reg = <0x60>;
- max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+ max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+ <&gpx0 4 GPIO_ACTIVE_HIGH>;
max8952,default-mode = <0>;
max8952,dvs-mode-microvolt = <1250000>, <1200000>,
<1050000>, <950000>;
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
<1100000>, <1000000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
regulators {
safeout1_reg: ESAFEOUT1 {
regulator-name = "SAFEOUT1";
- regulator-always-on;
};
safeout2_reg: ESAFEOUT2 {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 0>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
chosen {
power_key {
interrupt-parent = <&gpx1>;
interrupts = <3 0>;
- gpios = <&gpx1 3 1>;
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
pinctrl-0 = <&sd1_cd>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpk1 2 1>;
+ reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
};
camera {
};
&hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
};
&i2c_0 {
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
compatible = "smsc,usb3503";
reg = <0x08>;
- intn-gpios = <&gpx3 0 0>;
- connect-gpios = <&gpx3 4 0>;
- reset-gpios = <&gpx3 5 0>;
+ intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
initial-mode = <1>;
};
regulator-always-on;
};
- ldo8_reg: ldo@8 {
- regulator-compatible = "LDO8";
+ ldo8_reg: LDO8 {
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
- ldo10_reg: ldo@10 {
- regulator-compatible = "LDO10";
+ ldo10_reg: LDO10 {
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&i2c_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_bus>;
status = "okay";
max98090: max98090@10 {
compatible = "maxim,max98090";
&i2c_2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_bus>;
};
&i2c_8 {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo4_reg &ldo21_reg>;
- cd-gpios = <&gpk2 2 0>;
+ cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
compatible = "gpio-leds";
led1 {
label = "led1:heart";
- gpios = <&gpc1 0 1>;
+ gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 10000 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 102 170 230>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 7 7>;
+ };
+ map1 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&cpu0 13 13>;
+ };
+ map2 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map3 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map4 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+ };
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
};
&usb3503 {
compatible = "gpio-leds";
led1 {
label = "led1:heart";
- gpios = <&gpc1 0 1>;
+ gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led2 {
label = "led2:mmc0";
- gpios = <&gpc1 2 1>;
+ gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "mmc0";
};
home_key {
interrupt-parent = <&gpx2>;
interrupts = <2 0>;
- gpios = <&gpx2 2 0>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_HOME>;
label = "home key";
debounce-interval = <10>;
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpa1 1 1>;
+ gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
regulator-always-on;
};
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 0>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
s5m8767,pmic-buck-default-dvs-idx = <3>;
- s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
- s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
- <&gpm3 6 0>,
- <&gpm3 7 0>;
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+ <&gpm3 6 GPIO_ACTIVE_HIGH>,
+ <&gpm3 7 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
<1200000>, <1200000>,
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "FriendlyARM TINY4412 board based on Exynos4412";
led1 {
label = "led1";
- gpios = <&gpm4 0 1>;
+ gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
led2 {
label = "led2";
- gpios = <&gpm4 1 1>;
+ gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3 {
label = "led3";
- gpios = <&gpm4 2 1>;
+ gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led4 {
label = "led4";
- gpios = <&gpm4 3 1>;
+ gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "mmc0";
};
regulator-name = "CAM_SENSOR_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpm0 2 0>;
+ gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
- gpio = <&gpc0 1 0>;
+ gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "CAM_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpm0 4 0>;
+ gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpj0 5 0>;
+ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
compatible = "gpio-keys";
key-down {
- gpios = <&gpx3 3 1>;
+ gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
key-up {
- gpios = <&gpx2 2 1>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
key-power {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
};
key-ok {
- gpios = <&gpx0 1 1>;
+ gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
linux,code = <139>;
label = "ok";
debounce-inteval = <10>;
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+ gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
ak8975@0c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
- gpios = <&gpj0 7 0>;
+ gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
};
};
i2c_cm36651: i2c-gpio-2 {
compatible = "i2c-gpio";
- gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+ gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
vdd3-supply = <&lcd_vdd3_reg>;
vci-supply = <&ldo25_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
};
&exynos_usbphy {
+ vbus-supply = <&esafeout1_reg>;
status = "okay";
};
clocks = <&camera 1>;
clock-names = "extclk";
samsung,camclk-out = <1>;
- gpios = <&gpm1 6 0>;
+ gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
port {
is_s5k6a3_ep: endpoint {
s5c73m3@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
- standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
- xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+ standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
+ xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
vdd-int-supply = <&buck9_reg>;
vddio-cis-supply = <&ldo9_reg>;
vdda-supply = <&ldo17_reg>;
#clock-cells = <1>;
voltage-regulators {
- ldo1_reg: ldo1 {
- regulator-compatible = "LDO1";
+ ldo1_reg: LDO1 {
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- ldo2_reg: ldo2 {
- regulator-compatible = "LDO2";
+ ldo2_reg: LDO2 {
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
- ldo3_reg: ldo3 {
- regulator-compatible = "LDO3";
+ ldo3_reg: LDO3 {
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo4_reg: ldo4 {
- regulator-compatible = "LDO4";
+ ldo4_reg: LDO4 {
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- ldo5_reg: ldo5 {
- regulator-compatible = "LDO5";
+ ldo5_reg: LDO5 {
regulator-name = "VCC_1.8V_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo6_reg: ldo6 {
- regulator-compatible = "LDO6";
+ ldo6_reg: LDO6 {
regulator-name = "VMPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo7_reg: ldo7 {
- regulator-compatible = "LDO7";
+ ldo7_reg: LDO7 {
regulator-name = "VPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo8_reg: ldo8 {
- regulator-compatible = "LDO8";
+ ldo8_reg: LDO8 {
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo9_reg: ldo9 {
- regulator-compatible = "LDO9";
+ ldo9_reg: LDO9 {
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo10_reg: ldo10 {
- regulator-compatible = "LDO10";
+ ldo10_reg: LDO10 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
- ldo11_reg: ldo11 {
- regulator-compatible = "LDO11";
+ ldo11_reg: LDO11 {
regulator-name = "VABB1_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
};
};
- ldo12_reg: ldo12 {
- regulator-compatible = "LDO12";
+ ldo12_reg: LDO12 {
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
- ldo13_reg: ldo13 {
- regulator-compatible = "LDO13";
+ ldo13_reg: LDO13 {
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo14_reg: ldo14 {
- regulator-compatible = "LDO14";
+ ldo14_reg: LDO14 {
regulator-name = "VABB2_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
};
};
- ldo15_reg: ldo15 {
- regulator-compatible = "LDO15";
+ ldo15_reg: LDO15 {
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo16_reg: ldo16 {
- regulator-compatible = "LDO16";
+ ldo16_reg: LDO16 {
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
- ldo17_reg: ldo17 {
- regulator-compatible = "LDO17";
+ ldo17_reg: LDO17 {
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo18_reg: ldo18 {
- regulator-compatible = "LDO18";
+ ldo18_reg: LDO18 {
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo19_reg: ldo19 {
- regulator-compatible = "LDO19";
+ ldo19_reg: LDO19 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo20_reg: ldo20 {
- regulator-compatible = "LDO20";
+ ldo20_reg: LDO20 {
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo21_reg: ldo21 {
- regulator-compatible = "LDO21";
+ ldo21_reg: LDO21 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
};
- ldo22_reg: ldo22 {
- regulator-compatible = "LDO22";
+ ldo22_reg: LDO22 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- ldo23_reg: ldo23 {
- regulator-compatible = "LDO23";
+ ldo23_reg: LDO23 {
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo24_reg: ldo24 {
- regulator-compatible = "LDO24";
+ ldo24_reg: LDO24 {
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo25_reg: ldo25 {
- regulator-compatible = "LDO25";
+ ldo25_reg: LDO25 {
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- ldo26_reg: ldo26 {
- regulator-compatible = "LDO26";
+ ldo26_reg: LDO26 {
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
- buck1_reg: buck1 {
- regulator-compatible = "BUCK1";
+ buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
};
};
- buck2_reg: buck2 {
- regulator-compatible = "BUCK2";
+ buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
};
};
- buck3_reg: buck3 {
- regulator-compatible = "BUCK3";
+ buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
};
};
- buck4_reg: buck4 {
- regulator-compatible = "BUCK4";
+ buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
};
};
- buck5_reg: buck5 {
- regulator-compatible = "BUCK5";
+ buck5_reg: BUCK5 {
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- buck6_reg: buck6 {
- regulator-compatible = "BUCK6";
+ buck6_reg: BUCK6 {
regulator-name = "VCC_SUB_1.35V";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- buck7_reg: buck7 {
- regulator-compatible = "BUCK7";
+ buck7_reg: BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
- buck8_reg: buck8 {
- regulator-compatible = "BUCK8";
+ buck8_reg: BUCK8 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- buck9_reg: buck9 {
- regulator-compatible = "BUCK9";
+ buck9_reg: BUCK9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
&sdhci_2 {
bus-width = <4>;
- cd-gpios = <&gpx3 4 0>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
cd-inverted;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
&spi_1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
- cs-gpios = <&gpb 5 0>;
+ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
s5c73m3_spi: s5c73m3 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
+ opp-suspend;
};
opp07 {
opp-hz = /bits/ 64 <900000000>;
reg = <0x10000000 0x100>;
};
+ sromc@12250000 {
+ compatible = "samsung,exynos-srom";
+ reg = <0x12250000 0x10>;
+ };
+
combiner: interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
-};
-
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
};
};
+&fimd {
+ status = "okay";
+};
+
&hdmi {
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
-};
-
-&ehci {
- samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+};
+
&hdmi {
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
};
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo11_reg: LDO11 {
--- /dev/null
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ aliases {
+ i2c104 = &i2c_104;
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ stdout-path = "serial3:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq &lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ vbat: vbat-fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ };
+
+ i2c-arbitrator {
+ compatible = "i2c-arb-gpio-challenge";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@12CA0000}>;
+
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+ slew-delay-us = <10>;
+ wait-retry-us = <3000>;
+ wait-free-us = <50000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+ /* Use ID 104 as a hint that we're on physical bus 4 */
+ i2c_104: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ wakeup-source;
+ };
+
+ power-regulator {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ dcdc1 {
+ ti,enable-ext-control;
+ };
+ dcdc2 {
+ ti,enable-ext-control;
+ };
+ dcdc3 {
+ ti,enable-ext-control;
+ };
+ fet1: fet1 {
+ regulator-name = "vcd_led";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet4 {
+ regulator-name = "sdcard";
+ ti,overcurrent-wait = <3>;
+ };
+ fet5 {
+ regulator-name = "camout";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ ldo1 {
+ };
+ ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+
+ sound {
+ samsung,i2s-controller = <&i2s0>;
+ };
+
+ usb3_vbus_reg: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_en>;
+ enable-active-high;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <&fet1>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+
+ panel: panel {
+ compatible = "auo,b116xw03";
+ power-supply = <&fet6>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+ <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "ext_clock";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ max77686: max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+ cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ wifi_rst: wifi-rst {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+ dr_mode = "host";
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
--- /dev/null
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+ model = "Google Snow Rev 5+";
+ compatible = "google,snow-rev5", "samsung,exynos5250",
+ "samsung,exynos5";
+
+ sound {
+ compatible = "google,snow-audio-max98090";
+
+ samsung,model = "Snow-I2S-MAX98090";
+ samsung,audio-codec = <&max98090>;
+ };
+};
+
+&i2c_7 {
+ max98090: codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98090_irq>;
+ };
+};
+
+&pinctrl_0 {
+ max98090_irq: max98090-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
/ {
model = "Google Snow";
- compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
- aliases {
- i2c104 = &i2c_104;
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- bootargs = "console=tty1";
- stdout-path = "serial3:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq &lid_irq>;
-
- power {
- label = "Power";
- gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- gpio-key,wakeup;
- };
-
- lid-switch {
- label = "Lid";
- gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <5>; /* EV_SW */
- linux,code = <0>; /* SW_LID */
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
- };
-
- vbat: vbat-fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vbat-supply";
- regulator-boot-on;
- };
-
- i2c-arbitrator {
- compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&{/i2c@12CA0000}>;
-
- our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
- their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
- slew-delay-us = <10>;
- wait-retry-us = <3000>;
- wait-free-us = <50000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
- /* Use ID 104 as a hint that we're on physical bus 4 */
- i2c_104: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
-
- cros_ec: embedded-controller {
- compatible = "google,cros-ec-i2c";
- reg = <0x1e>;
- interrupts = <6 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_irq>;
- wakeup-source;
- };
-
- power-regulator {
- compatible = "ti,tps65090";
- reg = <0x48>;
-
- /*
- * Config irq to disable internal pulls
- * even though we run in polling mode.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&tps65090_irq>;
-
- vsys1-supply = <&vbat>;
- vsys2-supply = <&vbat>;
- vsys3-supply = <&vbat>;
- infet1-supply = <&vbat>;
- infet2-supply = <&vbat>;
- infet3-supply = <&vbat>;
- infet4-supply = <&vbat>;
- infet5-supply = <&vbat>;
- infet6-supply = <&vbat>;
- infet7-supply = <&vbat>;
- vsys-l1-supply = <&vbat>;
- vsys-l2-supply = <&vbat>;
-
- regulators {
- dcdc1 {
- ti,enable-ext-control;
- };
- dcdc2 {
- ti,enable-ext-control;
- };
- dcdc3 {
- ti,enable-ext-control;
- };
- fet1: fet1 {
- regulator-name = "vcd_led";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet2: fet2 {
- regulator-name = "video_mid";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet3 {
- regulator-name = "wwan_r";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet4 {
- regulator-name = "sdcard";
- ti,overcurrent-wait = <3>;
- };
- fet5 {
- regulator-name = "camout";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet6: fet6 {
- regulator-name = "lcd_vdd";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet7: fet7 {
- regulator-name = "video_mid_1a";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- ldo1 {
- };
- ldo2 {
- };
- };
-
- charger {
- compatible = "ti,tps65090-charger";
- };
- };
- };
- };
+ compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+ "samsung,exynos5";
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
- samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};
-
- usb3_vbus_reg: regulator-usb3 {
- compatible = "regulator-fixed";
- regulator-name = "P5.0V_USB3CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_en>;
- enable-active-high;
- };
-
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
- power-supply = <&fet1>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- };
-
- panel: panel {
- compatible = "auo,b116xw03";
- power-supply = <&fet6>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&bridge_out>;
- };
- };
- };
-
- mmc3_pwrseq: mmc3_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
- <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
- clocks = <&max77686 MAX77686_CLK_PMIC>;
- clock-names = "ext_clock";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
- ports {
- port@0 {
- dp_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
- };
-};
-
-&ehci {
- samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
- status = "okay";
- samsung,invert-vclk;
-};
-
-&hdmi {
- hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- max77686: max77686@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
- wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c_1 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
- samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
-};
-
-&i2c_3 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
};
&i2c_7 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- ptn3460: lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
- edid-emulation = <5>;
-
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- port@1 {
- bridge_in: endpoint {
- remote-endpoint = <&dp_out>;
- };
- };
- };
- };
-
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
pinctrl-names = "default";
+ pinctrl-0 = <&max98095_en>;
};
};
-&i2c_8 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mmc_0 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
-};
-
-&mmc_2 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
- cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- cap-sdio-irq;
- keep-power-in-suspend;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
- bus-width = <4>;
- cap-sd-highspeed;
- mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
&pinctrl_0 {
- wifi_en: wifi-en {
- samsung,pins = "gpx0-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- wifi_rst: wifi-rst {
- samsung,pins = "gpx0-2";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- power_key_irq: power-key-irq {
- samsung,pins = "gpx1-3";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
max98095_en: max98095-en {
samsung,pins = "gpx1-7";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- lid_irq: lid-irq {
- samsung,pins = "gpx3-5";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
-};
-
-&pinctrl_1 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
- samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
- samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
-};
-
-&spi_1 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd_dwc3 {
- dr_mode = "host";
-};
-
-&usbdrd_phy {
- vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>,
+ <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+ <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+ clock-names = "oscclk", "clk0", "clk1";
};
clock: clock-controller@10010000 {
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
wakeup {
label = "SW-TACT1";
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 0>;
+ gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 0>;
+ gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
+ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
- cs-gpios = <&gpb1 2 0>;
+ cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
pinctrl-0 = <&ec_spi_cs &ec_irq>;
reg = <0>;
spi-max-frequency = <3125000>;
+ google,has-vbc-nvram;
controller-data {
samsung,spi-feedback-delay = <1>;
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg0 5 0>;
+ gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg1 4 0>;
+ gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
status = "okay";
-};
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
};
};
+&fimd {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
};
interrupt-parent = <&combiner>;
interrupts = <3 0>;
clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+ clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};
--- /dev/null
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
pinctrl-0 = <&emmc_nrst_pin>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpd1 0 1>;
- };
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
-
- sound: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "Odroid-XU3";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speakers", "Speakers";
- simple-audio-card,routing =
- "Headphone Jack", "HPL",
- "Headphone Jack", "HPR",
- "Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
- "Speakers", "SPKL",
- "Speakers", "SPKR";
-
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
- };
-
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- };
+ reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
};
fan0: pwm-fan {
&hdmi {
status = "okay";
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
s2mps11,buck2-ramp-enable = <1>;
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
+ samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
};
-&hsi2c_5 {
- status = "okay";
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
};
-&i2s0 {
- status = "okay";
-};
-
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
};
};
-&pwm {
- /*
- * PWM 0 -- fan
- * PWM 1 -- Green LED
- * PWM 2 -- Blue LED
- * PWM 3 -- on MIPI connector for backlight
- */
- pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
- pinctrl-names = "default";
- samsung,pwm-outputs = <0>;
- status = "okay";
-};
-
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
status = "okay";
dr_mode = "host";
};
-&usbdrd_dwc3_1 {
- dr_mode = "otg";
-};
+/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
};
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
};
&i2c_0 {
shunt-resistor = <10000>;
};
};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
--- /dev/null
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU4";
+ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm0_out &pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>, <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
/dts-v1/;
#include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
};
&pcie_0 {
- reset-gpio = <&pin_ctrl 5 0>;
+ reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie_1 {
- reset-gpio = <&pin_ctrl 22 0>;
+ reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
status = "okay";
};
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 0>;
+ gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 0>;
+ gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
+ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
panel = <&panel>;
};
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
- cs-gpios = <&gpb1 2 0>;
+ cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
pinctrl-0 = <&ec_spi_cs &ec_irq>;
reg = <0>;
spi-max-frequency = <3125000>;
+ google,has-vbc-nvram;
controller-data {
samsung,spi-feedback-delay = <1>;
compatible = "hisilicon,hi3620-hi4511";
chosen {
- bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+ bootargs = "root=/dev/ram0";
+ stdout-path = "serial0:115200n8";
};
memory {
compatible = "hisilicon,hix5hd2";
chosen {
- bootargs = "console=ttyAMA0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
cpus {
};
ocotp@8002c000 {
- compatible = "fsl,ocotp";
+ compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x8002c000 0x2000>;
- status = "disabled";
+ clocks = <&clks 15>;
};
axi-ahb@8002e000 {
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25vf016b";
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p80";
+ compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
ocotp: ocotp@8002c000 {
- compatible = "fsl,ocotp";
+ compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x8002c000 0x2000>;
- status = "disabled";
+ clocks = <&clks 25>;
};
axi-ahb@8002e000 {
#size-cells = <0>;
cpu {
- compatible = "arm,arm1136";
+ compatible = "arm,arm1136jf-s";
device_type = "cpu";
};
};
#size-cells = <0>;
cpu {
- compatible = "arm,arm1136";
+ compatible = "arm,arm1136jf-s";
device_type = "cpu";
};
};
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p32", "m25p80";
+ compatible = "m25p32", "jedec,spi-nor";
spi-max-frequency = <25000000>;
reg = <1>;
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
- interrupts = <23 0x8>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
regulators {
sw1_reg: sw1a {
regulator-name = "SW1";
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p32", "st,m25p";
+ compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
#include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
--- /dev/null
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+ compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6qdl-nitrogen6x.dtsi"
/ {
- model = "Freescale i.MX6 DualLite Nitrogen6x Board";
- compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+ model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+ compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
};
&ecspi3 {
flash: m25p80@0 {
- compatible = "sst,sst25vf016b";
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
flash: m25p80@0 {
- compatible = "m25p80";
+ compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
status = "okay";
flash: m25p80@0 {
- compatible = "sst,w25q256";
+ compatible = "sst,w25q256", "jedec,spi-nor";
spi-max-frequency = <30000000>;
reg = <0>;
};
--- /dev/null
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+ compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6qdl-nitrogen6x.dtsi"
/ {
- model = "Freescale i.MX6 Quad Nitrogen6x Board";
- compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+ model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+ compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
};
&sata {
&ecspi3 {
flash: m25p80@0 {
- compatible = "sst,sst25vf032b";
+ compatible = "sst,sst25vf032b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
flash: m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
};
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25vf040b", "m25p80";
+ compatible = "sst,sst25vf040b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
--- /dev/null
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+ };
+
+ bt_rfkill {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_rfkill>;
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ name = "bt_rfkill";
+ type = <2>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ home {
+ label = "Home";
+ gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+ linux,code = <102>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+ linux,code = <158>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ j14-pin1 {
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+
+ j14-pin3 {
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+
+ j14-pins8-9 {
+ gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+
+ j46-pin2 {
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+
+ j46-pin3 {
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+ };
+
+ backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight_lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ panel_lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6dl-nit6xlite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ rtc@6f {
+ compatible = "isil,isl1208";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ reg = <0x6f>;
+ interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j10>;
+ pinctrl-1 = <&pinctrl_j28>;
+
+ imx6dl-nit6xlite {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_bt_rfkill: bt_rfkillgrp {
+ fsl,pins = <
+ /* BT wake */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* BT reset */
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
+ /* BT reg en */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+ /* BT host wake irq */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Home Button: J14 pin 5 */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Back Button: J14 pin 7 */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ /* Touch IRQ: J7 pin 4 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ /* tcs2004 IRQ */
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0
+ /* tsc2004 reset */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0
+ >;
+ };
+
+ pinctrl_j10: j10grp {
+ fsl,pins = <
+ /* Broadcom WiFi module pins */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+
+ pinctrl_j28: j28grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_wlan_vmmc>;
+ vqmmc-1-8-v;
+ ocr-limit = <0x180>; /* 1.65v - 2.1v */
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0xF0000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_h1_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_can_xcvr: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ i2cmux@2 {
+ compatible = "i2c-mux-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+ &gpio4 15 GPIO_ACTIVE_HIGH>;
+ i2c-parent = <&i2c2>;
+ idle-state = <0>;
+
+ i2c2@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ i2cmux@3 {
+ compatible = "i2c-mux-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ i2c-parent = <&i2c3>;
+ idle-state = <0>;
+
+ i2c3@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ speaker-enable {
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ retain-state-suspended;
+ default-state = "off";
+ };
+
+ ttymxc4-rs232 {
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+ retain-state-suspended;
+ default-state = "on";
+ };
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight_lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds1: backlight_lvds1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel_lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel_lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds1>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6_max-sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "st,rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&iomuxc {
+ imx6q-nitrogen6_max {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2mux: i2c2muxgrp {
+ fsl,pins = <
+ /* ov5642 camera i2c enable */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0
+ /* ov5640_mipi camera i2c enable */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3mux: i2c3muxgrp {
+ fsl,pins = <
+ /* PCIe I2C enable */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_rv4162: rv4162grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1
+ /* RS485 RX Enable: pull up */
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1
+ /* RS485 DEN: pull down */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1
+ /* RS485/!RS232 Select: pull down (rs232) */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1
+ /* ON: pull down */
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
+
+ reg_wlan_vmmc: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
gpio-keys {
mux-ext-port = <3>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
status = "okay";
};
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
status = "okay";
flash: m25p80@0 {
- compatible = "sst,sst25vf016b";
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ touchscreen@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
};
&iomuxc {
fsl,pins = <
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
>;
};
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
>;
};
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
>;
};
+
+ pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Phytec phyFLEX-i.MX6 Ouad";
+ model = "Phytec phyFLEX-i.MX6 Quad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory {
cs-gpios = <&gpio4 24 0>;
flash@0 {
- compatible = "m25p80";
+ compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&pcie {
- pinctrl-name = "default";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio4 17 0>;
status = "disabled";
compatible = "regulator-fixed";
reg = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p32";
+ compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
mux-ext-port = <4>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
status = "okay";
};
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
status = "okay";
flash: m25p80@0 {
- compatible = "sst,sst25vf016b";
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p32";
+ compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
- clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
- <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
- <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
- <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
- <&clks IMX6QDL_CLK_DUMMY>;
+ clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+ <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+ <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+ <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+ <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7";
+ "rxtx7", "dma";
status = "disabled";
};
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p32";
+ compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
ranges;
spdif: spdif@02004000 {
+ compatible = "fsl,imx6sl-spdif",
+ "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>,
+ <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+ <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "dma";
+ status = "disabled";
};
ecspi1: ecspi@02008000 {
};
dcp: dcp@020fc000 {
+ compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
- interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+ <0 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0 101 IRQ_TYPE_LEVEL_HIGH>;
};
};
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl128s";
+ compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
reg = <1>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl128s";
+ compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
};
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <1>;
};
regulator-name = "peri_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
- clocks = <&clks IMX6SX_CLK_SPDIF>,
+ clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
<&clks IMX6SX_CLK_OSC>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks 0>, <&clks 0>, <&clks 0>,
};
};
+&snvs_poweroff {
+ status = "okay";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xffff>;
+ pre-charge-time = <0xfff>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
>;
};
+ pinctrl_tsc: tscgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
status = "disabled";
};
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ };
+
aips1: aips-bus@02000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ status = "disabled";
+ };
+
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
status = "disabled";
};
+ tsc: tsc@02040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ status = "disabled";
+ };
+
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
status = "disabled";
};
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
qspi: qspi@021e0000 {
#address-cells = <1>;
#size-cells = <0>;
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX 0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX 0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5 0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL 0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3 0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX 0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX 0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY 0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5 0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL 0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS 0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS 0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA 0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6 0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL 0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS 0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS 0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB 0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6 0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI 0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1 0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5 0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID 0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT 0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2 0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY 0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2 0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL 0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID 0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B 0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO 0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B 0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3 0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0 0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP 0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC 0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B 0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4 0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1 0x0030 0x0288 0x06DC 0x6 0x0
#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0
#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0
#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0
#define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0
#define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0
#define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1
-#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x06F4 0x0 0x0
#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0
#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0
#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0
#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0
#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0
#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0
-#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2
#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0
#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0
#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0
#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0
#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0
#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0700 0x0 0x2
#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0
#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0
#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0
arm-supply = <&sw1a_reg>;
};
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
status = "okay";
};
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ >;
+ };
+
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
>;
};
-
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
status = "disabled";
};
+ iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+ };
+
gpt1: gpt@302d0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302d0000 0x10000>;
};
};
+ aips2: aips-bus@30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30400000 0x400000>;
+ ranges;
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+ <&clks IMX7D_PWM1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+ <&clks IMX7D_PWM2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+ <&clks IMX7D_PWM3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+ <&clks IMX7D_PWM4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+ };
+
aips3: aips-bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
status = "disabled";
};
- uart2: serial@30870000 {
+ uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
- reg = <0x30870000 0x10000>;
+ reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
status = "disabled";
};
+ usbotg1: usb@30b10000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b10000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbh: usb@30b30000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b30000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop3>;
+ fsl,usbmisc = <&usbmisc3 0>;
+ phy_type = "hsic";
+ dr_mode = "host";
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@30b10200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b10200 0x200>;
+ };
+
+ usbmisc2: usbmisc@30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
+
+ usbmisc3: usbmisc@30b30200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b30200 0x200>;
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop3: usbphynop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ };
+
usdhc1: usdhc@30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
bus-width = <4>;
status = "disabled";
};
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+
+ fec2: ethernet@30bf0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
};
};
};
#include "k2e.dtsi"
/ {
- compatible = "ti,k2e-evm","ti,keystone";
+ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
model = "Texas Instruments Keystone 2 Edison EVM";
soc {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2e", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Edison SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "k2hk.dtsi"
/ {
- compatible = "ti,k2hk-evm","ti,keystone";
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
soc {
"region", "push", "pop";
};
};
+
queue-pools {
qpend {
qpend-0 {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2hk", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "k2l.dtsi"
/ {
- compatible = "ti,k2l-evm","ti,keystone";
+ compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr EVM";
soc {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2l", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Lamarr SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "skeleton.dtsi"
/ {
+ compatible = "ti,keystone";
model = "Texas Instruments Keystone 2 SoC";
#address-cells = <2>;
#size-cells = <2>;
};
spi0: spi@21000400 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000400 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
};
spi1: spi@21000600 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000600 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
};
spi2: spi@21000800 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000800 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- cesa: crypto@0301 {
- compatible = "marvell,orion-crypto";
- reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
- <MBUS_ID(0x03, 0x01) 0 0x800>;
- reg-names = "regs", "sram";
- interrupts = <22>;
- clocks = <&gate_clk 17>;
- status = "okay";
- };
-
nand: nand@012f {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
status = "disabled";
};
+
+ crypto_sram: sa-sram@0301 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+ clocks = <&gate_clk 17>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
ocp@f1000000 {
status = "okay";
};
+ cesa: crypto@30000 {
+ compatible = "marvell,kirkwood-crypto";
+ reg = <0x30000 0x10000>;
+ reg-names = "regs";
+ interrupts = <22>;
+ clocks = <&gate_clk 17>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
+ status = "okay";
+ };
+
usb0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
/ {
model = "LogicPD Zoom DM3730 Torpedo Development Kit";
- compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
gpio_keys {
compatible = "gpio-keys";
};
soc {
+ sct_pwm: pwm@40000000 {
+ compatible = "nxp,lpc1850-sct-pwm";
+ reg = <0x40000000 0x1000>;
+ clocks =<&ccu1 CLK_CPU_SCT>;
+ clock-names = "pwm";
+ resets = <&rgu 37>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ dmac: dma-controller@40002000 {
+ compatible = "arm,pl080", "arm,primecell";
+ arm,primecell-periphid = <0x00041080>;
+ reg = <0x40002000 0x1000>;
+ interrupts = <2>;
+ clocks = <&ccu1 CLK_CPU_DMA>;
+ clock-names = "apb_pclk";
+ resets = <&rgu 19>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ };
+
+ spifi: flash-controller@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+ status = "disabled";
+ };
+
mmcsd: mmcsd@40004000 {
compatible = "snps,dw-mshc";
reg = <0x40004000 0x1000>;
num-slots = <1>;
clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
clock-names = "ciu", "biu";
+ resets = <&rgu 20>;
status = "disabled";
};
reg = <0x40006100 0x100>;
interrupts = <8>;
clocks = <&ccu1 CLK_CPU_USB0>;
+ resets = <&rgu 17>;
phys = <&usb0_otg_phy>;
phy-names = "usb";
has-transaction-translator;
reg = <0x40007100 0x100>;
interrupts = <9>;
clocks = <&ccu1 CLK_CPU_USB1>;
+ resets = <&rgu 18>;
status = "disabled";
};
reg = <0x40005000 0x1000>;
clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
clock-names = "mpmcclk", "apb_pclk";
+ resets = <&rgu 21>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x1c000000 0x1000000
interrupt-names = "combined";
clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
clock-names = "clcdclk", "apb_pclk";
+ resets = <&rgu 16>;
status = "disabled";
};
interrupt-names = "macirq";
clocks = <&ccu1 CLK_CPU_ETHERNET>;
clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
status = "disabled";
};
compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
reg = <0x40043000 0x1000>;
clocks = <&ccu1 CLK_CPU_CREG>;
+ resets = <&rgu 5>;
usb0_otg_phy: phy@004 {
compatible = "nxp,lpc1850-usb-otg-phy";
clocks = <&ccu1 CLK_USB0>;
#phy-cells = <0>;
};
+
+ dmamux: dma-mux@11c {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+ };
};
cgu: clock-controller@40050000 {
"base_ssp0_clk", "base_sdio_clk";
};
+ rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+ };
+
+ watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ interrupts = <49>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ };
+
uart0: serial@40081000 {
compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x40081000 0x1000>;
interrupts = <24>;
clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 44>;
+ dmas = <&dmamux 1 1 2
+ &dmamux 2 1 2
+ &dmamux 11 2 2
+ &dmamux 12 2 2>;
+ dma-names = "tx", "rx", "tx", "rx";
status = "disabled";
};
interrupts = <25>;
clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 45>;
+ dmas = <&dmamux 3 1 2
+ &dmamux 4 1 2>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <22>;
clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 50>;
+ dmas = <&dmamux 9 0 2
+ &dmamux 10 0 2>;
+ dma-names = "rx", "tx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
interrupts = <12>;
clocks = <&ccu1 CLK_CPU_TIMER0>;
clock-names = "timerclk";
+ resets = <&rgu 32>;
};
timer1: timer@40085000 {
interrupts = <13>;
clocks = <&ccu1 CLK_CPU_TIMER1>;
clock-names = "timerclk";
+ resets = <&rgu 33>;
};
pinctrl: pinctrl@40086000 {
clocks = <&ccu1 CLK_CPU_SCU>;
};
+ i2c0: i2c@400a1000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400a1000 0x1000>;
+ interrupts = <18>;
+ clocks = <&ccu1 CLK_APB1_I2C0>;
+ resets = <&rgu 48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
can1: can@400a4000 {
compatible = "bosch,c_can";
reg = <0x400a4000 0x1000>;
interrupts = <43>;
clocks = <&ccu1 CLK_APB1_CAN1>;
+ resets = <&rgu 54>;
status = "disabled";
};
interrupts = <26>;
clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 46>;
+ dmas = <&dmamux 5 1 2
+ &dmamux 6 1 2>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <27>;
clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 47>;
+ dmas = <&dmamux 7 1 2
+ &dmamux 8 1 2
+ &dmamux 13 3 2
+ &dmamux 14 3 2>;
+ dma-names = "tx", "rx", "rx", "tx";
status = "disabled";
};
interrupts = <14>;
clocks = <&ccu1 CLK_CPU_TIMER2>;
clock-names = "timerclk";
+ resets = <&rgu 34>;
};
timer3: timer@400c4000 {
interrupts = <15>;
clocks = <&ccu1 CLK_CPU_TIMER3>;
clock-names = "timerclk";
+ resets = <&rgu 35>;
};
ssp1: spi@400c5000 {
interrupts = <23>;
clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 51>;
+ dmas = <&dmamux 11 2 2
+ &dmamux 12 2 2
+ &dmamux 3 3 2
+ &dmamux 4 3 2
+ &dmamux 5 2 2
+ &dmamux 6 2 2
+ &dmamux 13 2 2
+ &dmamux 14 2 2>;
+ dma-names = "rx", "tx", "tx", "rx",
+ "tx", "rx", "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@400e0000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400e0000 0x1000>;
+ interrupts = <19>;
+ clocks = <&ccu1 CLK_APB3_I2C1>;
+ resets = <&rgu 49>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
reg = <0x400e2000 0x1000>;
interrupts = <51>;
clocks = <&ccu1 CLK_APB3_CAN0>;
+ resets = <&rgu 55>;
status = "disabled";
};
#include "lpc18xx.dtsi"
#include "lpc4350.dtsi"
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
/ {
model = "Hitex LPC4350 Evaluation Board";
compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
device_type = "memory";
reg = <0x28000000 0x800000>; /* 8 MB */
};
+
+ pca_buttons {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ autorepeat;
+
+ button@0 {
+ label = "joy:right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "joy:up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+
+ button@2 {
+ label = "joy:enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "joy:left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "joy:down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "user:sw3";
+ linux,code = <KEY_F1>;
+ gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "user:sw4";
+ linux,code = <KEY_F2>;
+ gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "user:sw5";
+ linux,code = <KEY_F3>;
+ gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pca_leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ext:led0";
+ gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "ext:led1";
+ gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "ext:led2";
+ gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "ext:led3";
+ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&pinctrl {
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
uart0_pins: uart0-pins {
uart0_rx_cfg {
pins = "pf_11";
clock-frequency = <25000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ sensor@18 {
+ compatible = "nxp,jc42";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ };
+
+ pca_gpio: gpio@24 {
+ compatible = "nxp,pca9673";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "mii";
pinctrl-0 = <&enet_mii_pins>;
};
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x500000>; /* 5 MiB */
+ };
+ };
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
sdmmc_pins: sdmmc-pins {
sdmmc_clk_cfg {
pins = "pc_0";
};
};
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <0>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp0_pins: ssp0-pins {
+ ssp0_sck_miso_mosi {
+ pins = "pf_0", "pf_2", "pf_3";
+ function = "ssp0";
+ slew-rate = <1>;
+ bias-pull-down;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ ssp0_ssel {
+ pins = "pf_1";
+ function = "ssp0";
+ bias-pull-up;
+ };
+ };
+
uart0_pins: uart0-pins {
uart0_rx_cfg {
pins = "pf_11";
};
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ lm75@48 {
+ compatible = "nxp,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@57 {
+ compatible = "microchip,24c64";
+ reg = <0x57>;
+ };
+};
+
&emc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pins>;
};
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
+&ssp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_pins>;
+ num-cs = <1>;
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";
&i2c0 {
status = "okay";
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
};
&i2c1 {
interrupt-parent = <&gic>;
aliases {
+ crypto = &crypto;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
big-endian;
};
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x1700000 0x0 0x100000>;
+ ranges = <0x0 0x0 0x1700000 0x100000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ };
+
clockgen: clocking@1ee1000 {
#address-cells = <1>;
#size-cells = <1>;
model = "eTSEC";
fsl,magic-packet;
ranges;
+ dma-coherent;
queue-group@2d10000 {
#address-cells = <2>;
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
+ dma-coherent;
queue-group@2d50000 {
#address-cells = <2>;
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
+ dma-coherent;
queue-group@2d90000 {
#address-cells = <2>;
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
};
};
};
timer@c1109940 {
compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x14>;
+ reg = <0xc1109940 0x18>;
interrupts = <0 10 1>;
};
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ interrupts = <0 0 1>;
};
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x14>;
+ reg = <0xc81004c0 0x18>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_A: serial@c81084c0 {
+ uart_A: serial@c11084c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81084c0 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_B: serial@c81084dc {
+ uart_B: serial@c11084dc {
compatible = "amlogic,meson-uart";
- reg = <0xc81084dc 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_C: serial@c8108700 {
+ uart_C: serial@c1108700 {
compatible = "amlogic,meson-uart";
- reg = <0xc8108700 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
clocks = <&clk81>;
status = "disabled";
};
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "TRONFY MXQ S805";
+ compatible = "tronfy,mxq", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-C1";
+ compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x200>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x201>;
+ };
+
+ cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x202>;
+ };
+
+ cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x203>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ L2: l2-cache-controller@c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller@c4301000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xc4301000 0x1000>,
+ <0xc4300100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer@c1109940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0xc1109940 0x18>;
+ interrupts = <0 10 1>;
+ };
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x18>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_A: serial@c11084c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_B: serial@c11084dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_C: serial@c1108700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ clkc: clock-controller@c1104000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8b-clkc";
+ reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+ };
+
+ pinctrl: pinctrl@c1109880 {
+ compatible = "amlogic,meson8b-pinctrl";
+ reg = <0xc1109880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@c11080b0 {
+ reg = <0xc11080b0 0x28>,
+ <0xc11080e8 0x18>,
+ <0xc1108120 0x18>,
+ <0xc1108030 0x38>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+ };
+ };
+}; /* end of / */
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "mediatek,mt81xx-tz-smp";
cpu@0 {
device_type = "cpu";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ trustzone-bootinfo@80002000 {
+ compatible = "mediatek,trustzone-bootinfo";
+ reg = <0 0x80002000 0 0x1000>;
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <13000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "mediatek,mt6397-regulator";
mt6397_vpca15_reg: buck_vpca15 {
- regulator-compatible = "buck_vpca15";
regulator-name = "vpca15";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vpca7_reg: buck_vpca7 {
- regulator-compatible = "buck_vpca7";
regulator-name = "vpca7";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vsramca15_reg: buck_vsramca15 {
- regulator-compatible = "buck_vsramca15";
regulator-name = "vsramca15";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vsramca7_reg: buck_vsramca7 {
- regulator-compatible = "buck_vsramca7";
regulator-name = "vsramca7";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vcore_reg: buck_vcore {
- regulator-compatible = "buck_vcore";
regulator-name = "vcore";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vgpu_reg: buck_vgpu {
- regulator-compatible = "buck_vgpu";
regulator-name = "vgpu";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
};
mt6397_vdrm_reg: buck_vdrm {
- regulator-compatible = "buck_vdrm";
regulator-name = "vdrm";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
};
mt6397_vio18_reg: buck_vio18 {
- regulator-compatible = "buck_vio18";
regulator-name = "vio18";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <1980000>;
};
mt6397_vtcxo_reg: ldo_vtcxo {
- regulator-compatible = "ldo_vtcxo";
regulator-name = "vtcxo";
regulator-always-on;
};
mt6397_va28_reg: ldo_va28 {
- regulator-compatible = "ldo_va28";
regulator-name = "va28";
regulator-always-on;
};
mt6397_vcama_reg: ldo_vcama {
- regulator-compatible = "ldo_vcama";
regulator-name = "vcama";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2800000>;
};
mt6397_vio28_reg: ldo_vio28 {
- regulator-compatible = "ldo_vio28";
regulator-name = "vio28";
regulator-always-on;
};
mt6397_vusb_reg: ldo_vusb {
- regulator-compatible = "ldo_vusb";
regulator-name = "vusb";
};
mt6397_vmc_reg: ldo_vmc {
- regulator-compatible = "ldo_vmc";
regulator-name = "vmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vmch_reg: ldo_vmch {
- regulator-compatible = "ldo_vmch";
regulator-name = "vmch";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vemc_3v3_reg: ldo_vemc3v3 {
- regulator-compatible = "ldo_vemc3v3";
regulator-name = "vemc_3v3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vgp1_reg: ldo_vgp1 {
- regulator-compatible = "ldo_vgp1";
regulator-name = "vcamd";
regulator-min-microvolt = <1220000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vgp2_reg: ldo_vgp2 {
- regulator-compatible = "ldo_vgp2";
regulator-name = "vcamio";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vgp3_reg: ldo_vgp3 {
- regulator-compatible = "ldo_vgp3";
regulator-name = "vcamaf";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vgp4_reg: ldo_vgp4 {
- regulator-compatible = "ldo_vgp4";
regulator-name = "vgp4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vgp5_reg: ldo_vgp5 {
- regulator-compatible = "ldo_vgp5";
regulator-name = "vgp5";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
};
mt6397_vgp6_reg: ldo_vgp6 {
- regulator-compatible = "ldo_vgp6";
regulator-name = "vgp6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
};
mt6397_vibr_reg: ldo_vibr {
- regulator-compatible = "ldo_vibr";
regulator-name = "vibr";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <3300000>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "mediatek,mt81xx-tz-smp";
cpu0: cpu@0 {
device_type = "cpu";
};
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ trustzone-bootinfo@80002000 {
+ compatible = "mediatek,trustzone-bootinfo";
+ reg = <0 0x80002000 0 0x1000>;
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <13000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;
cpus {
cpu@0 {
- compatible = "arm,arm926ejs";
+ compatible = "arm,arm926ej-s";
};
};
ocp {
i2c@0 {
compatible = "i2c-cbus-gpio";
- gpios = <&gpio3 2 0 /* gpio66 clk */
- &gpio3 1 0 /* gpio65 dat */
- &gpio3 0 0 /* gpio64 sel */
+ gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+ &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+ &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
>;
#address-cells = <1>;
#size-cells = <0>;
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 0>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 0>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
/ {
model = "TI OMAP37XX EVM (TMDSEVM3730)";
- compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+ compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
memory {
device_type = "memory";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 22 0>; /* gpio150 */
+ gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
tsc2046@0 {
interrupt-parent = <&gpio6>;
interrupts = <15 0>; /* gpio175 */
- pendown-gpio = <&gpio6 15 0>;
+ pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&spi_gpio_pins>;
- gpio-sck = <&gpio1 12 0>;
- gpio-miso = <&gpio1 18 0>;
- gpio-mosi = <&gpio1 20 0>;
- cs-gpios = <&gpio1 19 0>;
+ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
/* lcd panel */
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 0>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
model = "Goldelico GTA04A5";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
};
};
/*
* Common device tree for IGEP boards based on AM/DM37x
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
&omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
- 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
- 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
- 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
- 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
};
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
- };
+ };
};
};
};
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <4>;
};
&mmc3 {
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
};
&twl_gpio {
/*
* Common Device Tree Source for IGEPv2
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
/*
* Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
/*
* Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
>;
};
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- >;
- };
};
/* On board Wifi module */
/*
* Common Device Tree Source for IGEP COM MODULE
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
/*
* Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
/*
* Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
tsc2046@0 {
interrupt-parent = <&gpio2>;
interrupts = <22 0>; /* gpio54 */
- pendown-gpio = <&gpio2 22 0>;
+ pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
};
};
};
&mmc1 {
- cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 0>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
status = "okay";
bus-width = <4>;
vmmc-supply = <&vmmc1>;
- cd-gpios = <&gpio6 4 0>; /* gpio_164 */
- wp-gpios = <&gpio6 3 0>; /* gpio_163 */
+ cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */
+ wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
ti,dual-volt;
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- gpio = <&gpio5 29 0>; /* gpio line 157 */
+ gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
startup-delay-us = <150>;
enable-active-high;
};
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */
+ gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
startup-delay-us = <70000>;
enable-active-high;
};
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio6 4 0>; /* GPIO_164 */
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
/* wg7210 (wifi+bt module) 32k clock buffer */
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 0>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 0>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- cd-gpios = <&twl_gpio 0 0>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio4 5 0>; /* gpio101 */
+ gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
startup-delay-us = <70000>;
enable-active-high;
};
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 1 0>; /* gpio_1 */
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
startup-delay-us = <70000>;
enable-active-high;
/*
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 16 0>; /* gpio line 48 */
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
};
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 22 0>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>; /* gpio 43 */
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
startup-delay-us = <70000>;
enable-active-high;
};
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+ ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
0x4a002378 0x18>;
compatible = "ti,omap4460-bandgap";
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
- gpios = <&gpio3 22 0>; /* tshut */
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
#thermal-sensor-cells = <0>;
};
--- /dev/null
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ mmc3_pwrseq: sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clk32kgaudio>;
+ clock-names = "ext_clock";
+ };
+
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsdio_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */
+ enable-active-high;
+ startup-delay-us = <70000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ /* HS USB Host PHY on PORT 3 */
+ hsusb3_phy: hsusb3_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@1 {
+ label = "omap5:blue:usr1";
+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ tpd12s015: encoder@0 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ /* gpios defined in the board specific dts */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "b";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "omap5-uevm";
+
+ ti,mclk-freq = <19200000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+};
+
+&omap5_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_pins
+ &led_gpio_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ mcspi2_pins: pinmux_mcspi2_pins {
+ pinctrl-single,pins = <
+ 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
+ >;
+ };
+
+ mcspi3_pins: pinmux_mcspi3_pins {
+ pinctrl-single,pins = <
+ 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
+ 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
+ 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
+ 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+ OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+ OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+ OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+ OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+ OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+ >;
+ };
+
+ usbhost_pins: pinmux_usbhost_pins {
+ pinctrl-single,pins = <
+ 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+ 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+ 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ >;
+ };
+
+ led_gpio_pins: pinmux_led_gpio_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+ 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+ 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+ 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+ 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+ >;
+ };
+
+ uart5_pins: pinmux_uart5_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+ 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+ 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+ 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ >;
+ };
+};
+
+&omap5_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_wkup_pins
+ >;
+
+ usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+ pinctrl-single,pins = <
+ 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+ >;
+ };
+
+ wlcore_irq_pin: pinmux_wlcore_irq_pin {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&ldo9_reg>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
+ interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+ &omap5_pmx_core 0x168>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ compatible = "ti,palmas";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ reg = <0x48>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,system-power-controller;
+
+ extcon_usb3: palmas_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ ti,wakeup;
+ };
+
+ clk32kgaudio: palmas_clk32k@1 {
+ compatible = "ti,palmas-clk32kgaudio";
+ #clock-cells = <0>;
+ };
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-name = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_OPP_MM */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_out2_reg: smps10_out2 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out1_reg: smps10_out1 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VCC_2V8_DISP: Does not go anywhere */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ /* Unused */
+ status = "disabled";
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDAPHY_MDM: vdda_lli */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ /* Only if Modem is used */
+ status = "disabled";
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ /* Only for efuse reprograming! */
+ status = "disabled";
+ };
+
+ ldo8_reg: ldo8 {
+ /* VDD_3v0: Does not go anywhere */
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ /* Unused */
+ status = "disabled";
+ };
+
+ ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen3_reg: regen3 {
+ /* REGEN3 controls LDO9 supply to card */
+ regulator-name = "regen3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ palmas_power_button: palmas_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&palmas>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
+
+ vio-supply = <&smps7_reg>;
+ v2v1-supply = <&smps9_reg>;
+ enable-active-high;
+
+ clocks = <&clk32kgaudio>;
+ clock-names = "clk32k";
+ };
+};
+
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&usbhshost {
+ port2-mode = "ehci-hsic";
+ port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+ status = "ok";
+};
+
+&hdmi {
+ status = "ok";
+
+ /* vdda-supply populated in board specific dts file */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 0>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
--- /dev/null
+/*
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+ model = "IGEPv5";
+ compatible = "isee,omap5-igep0050", "ti,omap5";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x7f000000>; /* 2032 MB */
+ };
+};
+
+&hdmi {
+ vdda-supply = <&ldo7_reg>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ tca6416: tca6416@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&omap5_pmx_core {
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */
+ OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+};
+
+&tpd12s015 {
+ gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */
+ <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/
+ <&gpio7 1 0>, /* 193, HPD */
+ <&gpio7 2 0>, /* 194, SCL */
+ <&gpio7 3 0>; /* 195, SDA */
+};
+
*/
/dts-v1/;
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "omap5-board-common.dtsi"
/ {
model = "TI OMAP5 uEVM board";
device_type = "memory";
reg = <0x80000000 0x7F000000>; /* 2032 MB */
};
-
- aliases {
- display0 = &hdmi0;
- };
-
- vmmcsd_fixed: fixedregulator-mmcsd {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- /* HS USB Host PHY on PORT 2 */
- hsusb2_phy: hsusb2_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- clocks = <&auxclk1_ck>;
- clock-names = "main_clk";
- clock-frequency = <19200000>;
- };
-
- /* HS USB Host PHY on PORT 3 */
- hsusb3_phy: hsusb3_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
- };
-
- leds {
- compatible = "gpio-leds";
- led@1 {
- label = "omap5:blue:usr1";
- gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- tpd12s015: encoder@0 {
- compatible = "ti,tpd12s015";
-
- pinctrl-names = "default";
- pinctrl-0 = <&tpd12s015_pins>;
-
- gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
- <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
- <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tpd12s015_in: endpoint@0 {
- remote-endpoint = <&hdmi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tpd12s015_out: endpoint@0 {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-
- hdmi0: connector@0 {
- compatible = "hdmi-connector";
- label = "hdmi";
-
- type = "b";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&tpd12s015_out>;
- };
- };
- };
-
- sound: sound {
- compatible = "ti,abe-twl6040";
- ti,model = "omap5-uevm";
-
- ti,mclk-freq = <19200000>;
-
- ti,mcpdm = <&mcpdm>;
-
- ti,twl6040 = <&twl6040>;
-
- /* Audio routing */
- ti,audio-routing =
- "Headset Stereophone", "HSOL",
- "Headset Stereophone", "HSOR",
- "Line Out", "AUXL",
- "Line Out", "AUXR",
- "HSMIC", "Headset Mic",
- "Headset Mic", "Headset Mic Bias",
- "AFML", "Line In",
- "AFMR", "Line In";
- };
-};
-
-&omap5_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &usbhost_pins
- &led_gpio_pins
- >;
-
- twl6040_pins: pinmux_twl6040_pins {
- pinctrl-single,pins = <
- 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
- >;
- };
-
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
- 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
- >;
- };
-
- mcbsp1_pins: pinmux_mcbsp1_pins {
- pinctrl-single,pins = <
- 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
- 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
- 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
- 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
- >;
- };
-
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
- 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
- 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
- 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
- >;
- };
-
- i2c5_pins: pinmux_i2c5_pins {
- pinctrl-single,pins = <
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
- 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
- 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
- >;
- };
-
- mcspi3_pins: pinmux_mcspi3_pins {
- pinctrl-single,pins = <
- 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
- 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
- 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
- >;
- };
-
- mcspi4_pins: pinmux_mcspi4_pins {
- pinctrl-single,pins = <
- 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */
- 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */
- 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */
- 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */
- >;
- };
-
- usbhost_pins: pinmux_usbhost_pins {
- pinctrl-single,pins = <
- 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
- 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
- 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
- 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
- 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
- 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
- >;
- };
-
- led_gpio_pins: pinmux_led_gpio_pins {
- pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
- 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
- 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
- >;
- };
-
- uart5_pins: pinmux_uart5_pins {
- pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
- 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
- 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
- 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
- >;
- };
-
- dss_hdmi_pins: pinmux_dss_hdmi_pins {
- pinctrl-single,pins = <
- 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
- 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
- >;
- };
-
- tpd12s015_pins: pinmux_tpd12s015_pins {
- pinctrl-single,pins = <
- 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
- >;
- };
-};
-
-&omap5_pmx_wkup {
- pinctrl-names = "default";
- pinctrl-0 = <
- &usbhost_wkup_pins
- >;
-
- usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
- pinctrl-single,pins = <
- 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
- >;
- };
-};
-
-&mmc1 {
- vmmc-supply = <&ldo9_reg>;
- bus-width = <4>;
-};
-
-&mmc2 {
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <8>;
- ti,non-removable;
-};
-
-&mmc3 {
- bus-width = <4>;
- ti,non-removable;
-};
-
-&mmc4 {
- status = "disabled";
};
-&mmc5 {
- status = "disabled";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <400000>;
-
- palmas: palmas@48 {
- compatible = "ti,palmas";
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- reg = <0x48>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,system-power-controller;
-
- extcon_usb3: palmas_usb {
- compatible = "ti,palmas-usb-vid";
- ti,enable-vbus-detection;
- ti,enable-id-detection;
- ti,wakeup;
- };
-
- clk32kgaudio: palmas_clk32k@1 {
- compatible = "ti,palmas-clk32kgaudio";
- #clock-cells = <0>;
- };
-
- palmas_pmic {
- compatible = "ti,palmas-pmic";
- interrupt-parent = <&palmas>;
- interrupts = <14 IRQ_TYPE_NONE>;
- interrupt-name = "short-irq";
-
- ti,ldo6-vibrator;
-
- regulators {
- smps123_reg: smps123 {
- /* VDD_OPP_MPU */
- regulator-name = "smps123";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps45_reg: smps45 {
- /* VDD_OPP_MM */
- regulator-name = "smps45";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1310000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps6_reg: smps6 {
- /* VDD_DDR3 - over VDD_SMPS6 */
- regulator-name = "smps6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps7_reg: smps7 {
- /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
- regulator-name = "smps7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps8_reg: smps8 {
- /* VDD_OPP_CORE */
- regulator-name = "smps8";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1310000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps9_reg: smps9 {
- /* VDDA_2v1_AUD over VDD_2v1 */
- regulator-name = "smps9";
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- ti,smps-range = <0x80>;
- };
-
- smps10_out2_reg: smps10_out2 {
- /* VBUS_5V_OTG */
- regulator-name = "smps10_out2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps10_out1_reg: smps10_out1 {
- /* VBUS_5V_OTG */
- regulator-name = "smps10_out1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- ldo1_reg: ldo1 {
- /* VDDAPHY_CAM: vdda_csiport */
- regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo2_reg: ldo2 {
- /* VCC_2V8_DISP: Does not go anywhere */
- regulator-name = "ldo2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- /* Unused */
- status = "disabled";
- };
-
- ldo3_reg: ldo3 {
- /* VDDAPHY_MDM: vdda_lli */
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- /* Only if Modem is used */
- status = "disabled";
- };
-
- ldo4_reg: ldo4 {
- /* VDDAPHY_DISP: vdda_dsiport/hdmi */
- regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: ldo5 {
- /* VDDA_1V8_PHY: usb/sata/hdmi.. */
- regulator-name = "ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo6_reg: ldo6 {
- /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
- regulator-name = "ldo6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo7_reg: ldo7 {
- /* VDD_VPP: vpp1 */
- regulator-name = "ldo7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- /* Only for efuse reprograming! */
- status = "disabled";
- };
-
- ldo8_reg: ldo8 {
- /* VDD_3v0: Does not go anywhere */
- regulator-name = "ldo8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- /* Unused */
- status = "disabled";
- };
-
- ldo9_reg: ldo9 {
- /* VCC_DV_SDIO: vdds_sdcard */
- regulator-name = "ldo9";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldoln_reg: ldoln {
- /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
- regulator-name = "ldoln";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldousb_reg: ldousb {
- /* VDDA_3V_USB: VDDA_USBHS33 */
- regulator-name = "ldousb";
- regulator-min-microvolt = <3250000>;
- regulator-max-microvolt = <3250000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- regen3_reg: regen3 {
- /* REGEN3 controls LDO9 supply to card */
- regulator-name = "regen3";
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-
- palmas_power_button: palmas_power_button {
- compatible = "ti,palmas-pwrbutton";
- interrupt-parent = <&palmas>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- wakeup-source;
- };
- };
-
- twl6040: twl@4b {
- compatible = "ti,twl6040";
- reg = <0x4b>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&twl6040_pins>;
-
- interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
-
- vio-supply = <&smps7_reg>;
- v2v1-supply = <&smps9_reg>;
- enable-active-high;
-
- clocks = <&clk32kgaudio>;
- clock-names = "clk32k";
- };
+&hdmi {
+ vdda-supply = <&ldo4_reg>;
};
&i2c5 {
};
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
- status = "okay";
-};
-
-&mcbsp1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp1_pins>;
- status = "okay";
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
- status = "okay";
-};
-
-&usbhshost {
- port2-mode = "ehci-hsic";
- port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
- phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
- extcon = <&extcon_usb3>;
- vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <&omap5_pmx_core 0x19c>;
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
- cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
- status = "ok";
+&omap5_pmx_core {
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ >;
+ };
};
-&hdmi {
- status = "ok";
- vdda-supply = <&ldo4_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dss_hdmi_pins>;
-
- port {
- hdmi_out: endpoint {
- remote-endpoint = <&tpd12s015_in>;
- };
- };
+&tpd12s015 {
+ gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
+ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
+ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};
status = "disabled";
};
+ cesa: crypto@90000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <28>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
+ status = "okay";
+ };
+
ehci1: ehci@a0000 {
compatible = "marvell,orion-ehci";
reg = <0xa0000 0x1000>;
};
};
- cesa: crypto@90000 {
- compatible = "marvell,orion-crypto";
- reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
- <MBUS_ID(0x09, 0x00) 0x0 0x800>;
- reg-names = "regs", "sram";
- interrupts = <28>;
- status = "okay";
+ crypto_sram: sa-sram {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
};
#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "CompuLab CM-QS600";
stdout-path = "serial0:115200n8";
};
+ pwrseq {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ sdcc4_pwrseq: sdcc4_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_gpios>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+ };
+ };
+
soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
+ card_detect: card_detect {
mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
};
};
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- eeprom: eeprom@50 {
+ eeprom@50 {
compatible = "24c02";
reg = <0x50>;
pagesize = <32>;
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
regulator-always-on;
};
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ wlan_default_gpios: wlan-gpios {
+ pios {
+ pins = "gpio43";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
+ };
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
sdcc3: sdcc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
+ mmc-pwrseq = <&sdcc4_pwrseq>;
};
};
};
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Qualcomm APQ8064/IFC6410";
stdout-path = "serial0:115200n8";
};
+ pwrseq {
+ compatible = "simple-bus";
+
+ sdcc4_pwrseq: sdcc4_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_gpios>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <¬ify_led>;
+
+ led@1 {
+ label = "apq8064:green:user1";
+ gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
soc {
pinctrl@800000 {
card_detect: card_detect {
qcom,mode = <GSBI_PROT_I2C>;
i2c3: i2c@16280000 {
status = "okay";
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
};
};
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- eeprom: eeprom@52 {
+ eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
serial@16540000 {
status = "ok";
-
pinctrl-names = "default";
- pinctrl-0 = <&uart_pins>;
+ pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
status = "okay";
};
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ wlan_default_gpios: wlan-gpios {
+ pios {
+ pins = "gpio43";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+
+ notify_led: nled {
+ pios {
+ pins = "gpio18";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
+ };
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
vmmc-supply = <&ext_3p3v>;
vqmmc-supply = <&pm8921_lvs1>;
+ mmc-pwrseq = <&sdcc4_pwrseq>;
};
};
};
};
};
- uart_pins: uart_pins {
+ gsbi6_uart_2pins: gsbi6_uart_2pins {
+ mux {
+ pins = "gpio14", "gpio15";
+ function = "gsbi6";
+ };
+ };
+
+ gsbi6_uart_4pins: gsbi6_uart_4pins {
mux {
pins = "gpio14", "gpio15", "gpio16", "gpio17";
function = "gsbi6";
};
};
+
+ gsbi7_uart_2pins: gsbi7_uart_2pins {
+ mux {
+ pins = "gpio82", "gpio83";
+ function = "gsbi7";
+ };
+ };
+
+ gsbi7_uart_4pins: gsbi7_uart_4pins {
+ mux {
+ pins = "gpio82", "gpio83", "gpio84", "gpio85";
+ function = "gsbi7";
+ };
+ };
};
intc: interrupt-controller@2000000 {
i2c1: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
reg = <0x12460000 0x1000>;
interrupts = <0 194 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
ranges;
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI3_QUP_CLK>,
<136 1>, <137 1>, <138 1>, <139 1>;
};
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 1>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
};
};
compatible = "qcom,gcc-apq8084";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
};
};
+ firmware {
+ compatible = "simple-bus";
+
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>,
+ <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <19200000>;
};
+ smem {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
<0xf9002000 0x1000>;
};
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfd8c0000 0x6000>;
};
#hwlock-cells = <1>;
};
- smem@fa00000 {
- compatible = "qcom,smem";
-
- memory-region = <&smem_region>;
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
-
- hwlocks = <&tcsr_mutex 3>;
};
blsp1_uart2: serial@f991e000 {
};
blsp_i2c11: i2c@f9967000 {
- status = "disable";
+ status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
interrupts = <0 105 IRQ_TYPE_NONE>;
#interrupt-cells = <4>;
};
};
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {};
+ pm8841_s2: s2 {};
+ pm8841_s3: s3 {};
+ pm8841_s4: s4 {};
+ pm8841_s5: s5 {};
+ pm8841_s6: s6 {};
+ pm8841_s7: s7 {};
+ pm8841_s8: s8 {};
+ };
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ pm8941_s1: s1 {};
+ pm8941_s2: s2 {};
+ pm8941_s3: s3 {};
+ pm8941_5v: s4 {};
+
+ pm8941_l1: l1 {};
+ pm8941_l2: l2 {};
+ pm8941_l3: l3 {};
+ pm8941_l4: l4 {};
+ pm8941_l5: l5 {};
+ pm8941_l6: l6 {};
+ pm8941_l7: l7 {};
+ pm8941_l8: l8 {};
+ pm8941_l9: l9 {};
+ pm8941_l10: l10 {};
+ pm8941_l11: l11 {};
+ pm8941_l12: l12 {};
+ pm8941_l13: l13 {};
+ pm8941_l14: l14 {};
+ pm8941_l15: l15 {};
+ pm8941_l16: l16 {};
+ pm8941_l17: l17 {};
+ pm8941_l18: l18 {};
+ pm8941_l19: l19 {};
+ pm8941_l20: l20 {};
+ pm8941_l21: l21 {};
+ pm8941_l22: l22 {};
+ pm8941_l23: l23 {};
+ pm8941_l24: l24 {};
+
+ pm8941_lvs1: lvs1 {};
+ pm8941_lvs2: lvs2 {};
+ pm8941_lvs3: lvs3 {};
+
+ pm8941_5vs1: 5vs1 {};
+ pm8941_5vs2: 5vs2 {};
+ };
+ };
+ };
+ };
};
bias-pull-up;
};
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000 0x700>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ };
+
pm8941_gpios: gpios@c000 {
compatible = "qcom,pm8941-gpio";
reg = <0xc000 0x2400>;
pm8941_iadc: iadc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
- reg = <0x3600 0x100>,
- <0x12f1 0x1>;
+ reg = <0x3600 0x100>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
};
+++ /dev/null
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "bockw";
- compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
- stdout-path = &scif0;
- };
-
- memory {
- device_type = "memory";
- reg = <0x60000000 0x10000000>;
- };
-
- fixedregulator3v3: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ethernet@18300000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x18300000 0x1000>;
-
- phy-mode = "mii";
- interrupt-parent = <&irqpin>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- reg-io-width = <4>;
- vddvario-supply = <&fixedregulator3v3>;
- vdd33a-supply = <&fixedregulator3v3>;
- };
-
-};
-
-&mmcif {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <8>;
- broken-cd;
- status = "okay";
-};
-
-&irqpin {
- status = "okay";
-};
-
-&tmu0 {
- status = "okay";
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_a", "scif0_ctrl";
- renesas,function = "scif0";
- };
-
- mmc_pins: mmc {
- renesas,groups = "mmc_data8", "mmc_ctrl";
- renesas,function = "mmc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
- "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- hspi0_pins: hspi0 {
- renesas,groups = "hspi0_a";
- renesas,function = "hspi0";
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <4>;
- status = "okay";
- wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
- pinctrl-0 = <&hspi0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl008k", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- m25p,fast-read;
-
- partition@0 {
- label = "data(spi)";
- reg = <0x00000000 0x00100000>;
- };
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
reg = <0xffd90000 0x1000>, /* SRU */
- <0xffd91000 0x1240>, /* SSI */
+ <0xffd91000 0x240>, /* SSI */
<0xfffe0000 0x24>; /* ADG */
clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
<&mstp3_clks R8A7778_CLK_SSI7>,
compatible = "renesas,marzen", "renesas,r8a7779";
aliases {
- serial2 = &scif2;
- serial4 = &scif4;
+ serial0 = &scif2;
+ serial1 = &scif4;
};
chosen {
- bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=on";
stdout-path = &scif2;
};
1800000 0>;
};
+ audio_clock: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
rsnd_ak4643: sound {
compatible = "simple-audio-card";
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
- system-clock-frequency = <11289600>;
+ clocks = <&audio_clock>;
};
};
renesas,function = "msiof1";
};
+ iic0_pins: iic0 {
+ renesas,groups = "iic0";
+ renesas,function = "iic0";
+ };
+
iic1_pins: iic1 {
renesas,groups = "iic1";
renesas,function = "iic1";
&iic0 {
status = "okay";
+ pinctrl-0 = <&iic0_pins>;
+ pinctrl-names = "default";
};
&iic1 {
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
+ <0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&cpg_clocks>;
status = "disabled";
1800000 0>;
};
+ audio_clock: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
rsnd_ak4643: sound {
compatible = "simple-audio-card";
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
- system-clock-frequency = <11289600>;
+ clocks = <&audio_clock>;
};
};
--- /dev/null
+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Porter";
+ compatible = "renesas,porter", "renesas,r8a7791";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+
+ vcc_sdhi0: regulator@0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi0: regulator@1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi2: regulator@2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi2: regulator@3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+
+ i2c2_pins: i2c2 {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "ok";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader_prg";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user_prg";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash_fs";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
+ <0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&cpg_clocks>;
status = "disabled";
renesas,function = "intc";
};
+ i2c1_pins: i2c1 {
+ renesas,groups = "i2c1";
+ renesas,function = "i2c1";
+ };
+
mmcif0_pins: mmcif0 {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
};
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif2 {
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
non-removable;
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+/* composite video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ spi0 = &qspi;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
+ };
+
cmt0: timer@ffca0000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
status = "disabled";
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
status = "disabled";
};
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7794";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7794";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7794";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7794";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
- R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
- R8A7794_CLK_I2C0
- >;
+ clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+ R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+ R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+ R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+ R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+ R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+ R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
clock-output-names =
- "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+ "gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+ "gpio1", "gpio0", "qspi_mod",
+ "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
--- /dev/null
+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ panel {
+ compatible = "mitsubishi,aa121td01", "panel-dpi";
+
+ width-mm = <261>;
+ height-mm = <163>;
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <70>;
+ hfront-porch = <20>;
+ hback-porch = <70>;
+ vsync-len = <5>;
+ vfront-porch = <3>;
+ vback-porch = <15>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_connector>;
+ };
+ };
+ };
+};
+
+&lvds_connector {
+ remote-endpoint = <&panel_in>;
+};
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
};
};
+&mmc0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
+};
+
&pinctrl {
lan8720a {
phy_int: phy-int {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
status = "okay";
};
};
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
+ cpu { sound-dai = <&spdif>; };
+ codec { sound-dai = <&spdif_out>; };
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 10 1>;
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
};
};
+&spdif {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
status = "disabled";
};
+ spdif: sound@1011e000 {
+ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+ reg = <0x1011e000 0x2000>;
+ #sound-dai-cells = <0>;
+ clock-names = "hclk", "mclk";
+ clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+ dmas = <&dmac1_s 8>;
+ dma-names = "tx";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx>;
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3188-cru";
reg = <0x20000000 0x1000>;
<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
};
};
+
+ spdif {
+ spdif_tx: spdif-tx {
+ rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
};
};
reg = <0 0x80000000>;
};
+ dovdd_1v8: dovdd-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dovdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ext_gmac";
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&dovdd_1v8>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
pinctrl-names = "default";
};
};
- vcc_sys: vsys-regulator {
+ vbat_wl: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
+
+ /*
+ * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
regulator-always-on;
};
- vcc_18: REG11 {
+ vccio_wl: vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
gmac {
phy_int: phy-int {
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
- vmmc-supply = <&vcc_18>;
+ vmmc-supply = <&vbat_wl>;
+ vqmmc-supply = <&vccio_wl>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
};
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc18_dvp>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&ir_int>;
};
+ vcc_flash: flash-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_flash";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc18_dvp: vcc18-dvp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc18-dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_flash>;
status = "okay";
};
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
};
};
- vcca_codec: LDO_REG8 {
+ vcca_33: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_codec";
+ regulator-name = "vcca_33";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
- vcc_wl: SWITCH_REG1 {
+ vccio_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_wl";
+ regulator-name = "vccio_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ir {
ir_int: ir-int {
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&tsadc {
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ reg = <0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vccio_pmu>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &phy_rst>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ rx_delay = <0x10>;
+ tx_delay = <0x30>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ inl1-supply = <&vcc_io>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "VCCA_CODEC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_tp: REG8 {
+ regulator-name = "VCCA_TP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "VCCIO_PMU";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ phy_rst: phy-rst {
+ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+ model = "Radxa Rock 2 Square";
+ compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+ simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
+ cpu { sound-dai = <&spdif>; };
+ codec { sound-dai = <&spdif_out>; };
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ vcc_usb_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ /* Always on as the rockchip usb phy doesn't have a vbus-supply
+ * property
+ */
+ regulator-always-on;
+ regulator-name = "vcc_host";
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&gmac {
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Jaq";
+ compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ mic_vcc: LDO_REG2 {
+ regulator-name = "mic_vcc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ edp {
+ edp_hpd: edp_hpd {
+ rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
};
};
- /*
- * On Marvell-based hardware this is a no-connect. Make sure we enable
- * the pullup so that the line doesn't float. The pullup shouldn't
- * hurt on Broadcom-based hardware since the other side is actively
- * driving this signal. As proof: we've already got a pullup on RX.
- */
- uart0 {
- uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
- };
- };
-
write-protect {
fw_wp_ap: fw-wp-ap {
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
#include "skeleton.dtsi"
/ {
};
pmu: power-management@ff730000 {
- compatible = "rockchip,rk3288-pmu", "syscon";
+ compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
reg = <0xff730000 0x100>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Note: Although SCLK_* are the working clocks
+ * of device without including on the NOC, needed for
+ * synchronous reset.
+ *
+ * The clocks on the which NOC:
+ * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+ * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+ * ACLK_RGA is on ACLK_RGA_NIU.
+ * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+ *
+ * Which clock are device clocks:
+ * clocks devices
+ * *_IEP IEP:Image Enhancement Processor
+ * *_ISP ISP:Image Signal Processing
+ * *_VIP VIP:Video Input Processor
+ * *_VOP* VOP:Visual Output Processor
+ * *_RGA RGA
+ * *_EDP* EDP
+ * *_LVDS_* LVDS
+ * *_HDMI HDMI
+ * *_MIPI_* MIPI
+ */
+ pd_vio {
+ reg = <RK3288_PD_VIO>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru ACLK_ISP>,
+ <&cru ACLK_RGA>,
+ <&cru ACLK_VIP>,
+ <&cru ACLK_VOP0>,
+ <&cru ACLK_VOP1>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru HCLK_IEP>,
+ <&cru HCLK_ISP>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VIP>,
+ <&cru HCLK_VOP0>,
+ <&cru HCLK_VOP1>,
+ <&cru PCLK_EDP_CTRL>,
+ <&cru PCLK_HDMI_CTRL>,
+ <&cru PCLK_LVDS_PHY>,
+ <&cru PCLK_MIPI_CSI>,
+ <&cru PCLK_MIPI_DSI0>,
+ <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_EDP_24M>,
+ <&cru SCLK_EDP>,
+ <&cru SCLK_ISP_JPE>,
+ <&cru SCLK_ISP>,
+ <&cru SCLK_RGA>;
+ };
+
+ /*
+ * Note: The following 3 are HEVC(H.265) clocks,
+ * and on the ACLK_HEVC_NIU (NOC).
+ */
+ pd_hevc {
+ reg = <RK3288_PD_HEVC>;
+ clocks = <&cru ACLK_HEVC>,
+ <&cru SCLK_HEVC_CABAC>,
+ <&cru SCLK_HEVC_CORE>;
+ };
+
+ /*
+ * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+ * (video endecoder & decoder) clocks that on the
+ * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+ */
+ pd_video {
+ reg = <RK3288_PD_VIDEO>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ };
+
+ /*
+ * Note: ACLK_GPU is the GPU clock,
+ * and on the ACLK_GPU_NIU (NOC).
+ */
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
};
sgrf: syscon@ff740000 {
status = "disabled";
};
+ spdif: sound@ff88b0000 {
+ compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+ reg = <0xff8b0000 0x10000>;
+ #sound-dai-cells = <0>;
+ clock-names = "hclk", "mclk";
+ clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+ dmas = <&dmac_bus_s 3>;
+ dma-names = "tx";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
i2s: i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
ports {
#interrupt-cells = <2>;
};
+ hdmi {
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+ <7 20 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 14 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
<4 3 3 &pcfg_pull_none>;
};
};
+
+ spdif {
+ spdif_tx: spdif-tx {
+ rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
};
};
#size-cells = <0>;
cpu {
- compatible = "arm,arm926ejs";
+ compatible = "arm,arm926ej-s";
};
};
regulator-name = "V_TF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpios = <&mp05 4 0>;
+ gpio = <&mp05 4 0>;
enable-active-high;
};
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
reg = <0>;
- gpios = <&mp05 4 0>;
+ gpio = <&mp05 4 0>;
enable-active-high;
};
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
reg = <3>;
- gpios = <&gpj1 3 0>;
+ gpio = <&gpj1 3 0>;
enable-active-high;
};
};
--- /dev/null
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0 0
+#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0 PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1 1
+#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1 PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2 2
+#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0 PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0 PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2 PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3 3
+#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1 PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1 PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3 PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4 4
+#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2 PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2 PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4 PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5 5
+#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3 PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3 PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5 PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6 6
+#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4 PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5 PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6 PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7 7
+#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5 PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0 PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5 PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7 PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8 8
+#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6 PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1 PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5 PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9 9
+#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7 PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2 PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4 PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3 PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10 10
+#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3 PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4 PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11 11
+#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4 PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12 12
+#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13 13
+#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8 PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14 14
+#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1 PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15 14
+#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10 PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16 16
+#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1 PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0 PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11 PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17 17
+#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0 PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1 PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1 PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0 PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12 PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18 18
+#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1 PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1 PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2 PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0 PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0 PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13 PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19 19
+#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2 PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1 PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3 PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0 PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1 PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14 PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20 20
+#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3 PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0 PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2 PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15 PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21 21
+#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2 PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0 PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3 PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22 22
+#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0 PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23 23
+#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1 PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24 24
+#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2 PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0 PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25 25
+#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3 PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0 PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1 PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26 26
+#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4 PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1 PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2 PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27 27
+#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1 PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5 PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2 PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2 PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3 PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28 28
+#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1 PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6 PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3 PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3 PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0 PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29 29
+#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1 PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7 PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1 PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1 PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30 30
+#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0 PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0 PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2 PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31 31
+#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3 PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0 PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3 PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0 32
+#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1 PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1 33
+#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1 PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0 PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2 34
+#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0 PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1 PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3 35
+#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4 PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0 PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2 PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4 36
+#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4 PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3 PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5 37
+#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2 PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2 PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6 38
+#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2 PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2 PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7 39
+#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2 PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3 PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0 PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8 40
+#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3 PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3 PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1 PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9 41
+#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3 PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14 PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1 PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2 PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10 42
+#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3 PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15 PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3 PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2 PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11 43
+#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0 PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0 PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3 PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3 PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12 44
+#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1 PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1 PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3 PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2 PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13 45
+#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2 PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2 PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1 PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3 PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14 46
+#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3 PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3 PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1 PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15 47
+#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4 PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4 PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1 PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16 48
+#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5 PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5 PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1 PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0 PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17 49
+#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6 PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6 PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1 PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0 PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1 PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18 50
+#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7 PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7 PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1 PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0 PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2 PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0 PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19 51
+#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8 PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8 PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1 PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3 PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3 PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1 PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20 52
+#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9 PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9 PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0 PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3 PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1 PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0 PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21 53
+#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10 PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10 PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0 PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3 PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1 PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22 54
+#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23 55
+#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12 PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12 PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0 PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2 PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0 PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24 56
+#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13 PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13 PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0 PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2 PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10 PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25 57
+#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14 PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14 PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0 PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11 PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26 58
+#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15 PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15 PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0 PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0 PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27 59
+#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16 PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16 PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0 PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1 PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28 60
+#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17 PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17 PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0 PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5 PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2 PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29 61
+#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18 PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18 PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1 PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5 PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3 PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30 62
+#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19 PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19 PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2 PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5 PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4 PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31 63
+#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20 PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20 PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3 PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0 PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5 PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0 64
+#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21 PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23 PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0 PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6 PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1 65
+#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22 PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24 PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0 PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7 PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2 66
+#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23 PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25 PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0 PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8 PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3 67
+#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1 PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9 PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4 68
+#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1 PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1 PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0 PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0 PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5 69
+#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0 PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1 PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1 PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0 PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6 70
+#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1 PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1 PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2 PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7 71
+#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2 PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1 PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3 PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1 PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8 72
+#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0 PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1 PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9 73
+#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10 74
+#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2 PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1 PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4 PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0 PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11 75
+#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3 PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2 PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4 PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0 PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0 PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12 76
+#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4 PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3 PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3 PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0 PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1 PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13 77
+#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5 PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4 PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3 PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0 PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2 PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14 78
+#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15 79
+#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7 PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1 PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6 PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0 PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4 PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16 80
+#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10 PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0 PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7 PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0 PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17 81
+#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11 PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1 PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8 PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0 PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6 PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18 82
+#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12 PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9 PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2 PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7 PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19 83
+#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13 PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10 PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8 PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20 84
+#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14 PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11 PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9 PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21 85
+#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15 PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10 PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22 86
+#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18 PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4 PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11 PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23 87
+#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19 PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12 PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24 88
+#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20 PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2 PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13 PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25 89
+#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21 PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3 PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14 PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26 90
+#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22 PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2 PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1 PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27 91
+#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23 PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3 PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1 PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1 PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0 PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16 PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28 92
+#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2 PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0 PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17 PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29 93
+#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18 PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30 94
+#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19 PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31 95
+#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3 PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20 PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0 96
+#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3 PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23 PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1 97
+#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24 PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2 98
+#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1 PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25 PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3 99
+#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1 PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11 PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4 100
+#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1 PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2 PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10 PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0 PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5 101
+#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1 PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2 PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2 PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9 PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1 PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6 102
+#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1 PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3 PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8 PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2 PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7 103
+#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2 PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0 PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1 PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8 104
+#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3 PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1 PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9 105
+#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2 PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10 106
+#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3 PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11 107
+#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1 PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2 PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0 PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4 PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12 108
+#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1 PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5 PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4 PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13 109
+#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1 PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0 PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0 PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6 PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5 PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14 110
+#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1 PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1 PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7 PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6 PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15 111
+#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0 PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7 PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16 112
+#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1 PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8 PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17 113
+#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9 PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18 114
+#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10 PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19 115
+#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0 PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1 PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2 PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11 PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20 116
+#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2 PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1 PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2 PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21 117
+#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2 PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0 PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22 118
+#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2 PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0 PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0 PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23 119
+#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2 PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0 PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24 120
+#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD25 121
+#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26 122
+#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27 123
+#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28 124
+#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0 PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29 125
+#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1 PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3 PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0 PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30 126
+#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2 PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3 PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0 PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31 127
+#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3 PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0 PINMUX_PIN(PIN_PD31, 5, 2)
cache-level = <2>;
};
+ sdmmc0: sdio-host@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xb0000000 0x300>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
};
pmc: pmc@f0014000 {
- compatible = "atmel,sama5d2-pmc";
+ compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
atmel,clk-output-range = <0 83000000>;
};
+ i2s0_clk: i2s0_clk {
+ #clock-cells = <0>;
+ reg = <54>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s1_clk: i2s1_clk {
+ #clock-cells = <0>;
+ reg = <55>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
reg = <53>;
};
};
+
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ sdmmc0_gclk: sdmmc0_gclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_gclk: sdmmc1_gclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_gclk: tcb1_gclk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s0_gclk: i2s0_gclk {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ i2s1_gclk: i2s1_gclk {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+ };
};
sha@f0028000 {
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
aes@f002c000 {
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
spi0: spi@f8000000 {
status = "disabled";
};
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8038000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8038000 0x200>;
+ clocks = <&flx1_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8038000 0x800>;
+ status = "disabled";
+ };
+
+ rstc@f8048000 {
+ compatible = "atmel,sama5d3-rstc";
+ reg = <0xf8048000 0x10>;
+ clocks = <&clk32k>;
+ };
+
pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
status = "disabled";
};
+ flx2: flexcom@fc010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc010000 0x200>;
+ clocks = <&flx2_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc010000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@fc014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc014000 0x200>;
+ clocks = <&flx3_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc014000 0x800>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@fc018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc018000 0x200>;
+ clocks = <&flx4_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc018000 0x800>;
+ status = "disabled";
+ };
+
aic: interrupt-controller@fc020000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d2-aic";
clocks = <&twi1_clk>;
status = "disabled";
};
+
+ tdes@fc044000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
};
};
};
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <20000000>;
+ clock-frequency = <1000000>;
};
};
atmel,adc-use-external-triggers;
atmel,adc-vref = <3000>;
atmel,adc-res = <10 12>;
+ atmel,adc-sample-hold-time = <11>;
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
};
pmc: pmc@fffffc00 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
};
pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
atmel,pins =
- <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
- AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
- AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
};
};
};
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
};
pmc: pmc@f0018000 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
reg = <0xf8018000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(4)>,
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(4))>,
<&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(5)>;
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-names = "t0_clk", "slow_clk";
};
+ macb1: ethernet@fc028000 {
+ compatible = "atmel,sama5d4-gem";
+ reg = <0xfc028000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&macb1_clk>, <&macb1_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
adc0: adc@fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
tdes@fc04c000 {
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clock-names = "tdes_clk";
- status = "disabled";
+ status = "okay";
};
sha@fc050000 {
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
rstc@fc068600 {
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
- 0x00000000 0x00000000 0x00000000 /* pioD */
+ 0x0003ff00 0x8002a800 0x00000000 /* pioD */
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
- status = "disabled";
};
pioE: gpio@fc06d000 {
};
};
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */
+ AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */
+ AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */
+ AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */
+ AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */
+ AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */
+ AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */
+ AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */
+ >;
+ };
+ };
+
mmc0 {
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
};
accelerometer@1d {
- compatible = "adi,adxl34x";
+ compatible = "adi,adxl345";
reg = <0x1d>;
interrupt-parent = <&irqpin3>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
};
};
+ fpgamgr0: fpgamgr@ff706000 {
+ compatible = "altr,socfpga-fpga-mgr";
+ reg = <0xff706000 0x1000
+ 0xffb90000 0x1000>;
+ interrupts = <0 175 4>;
+ };
+
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x60 0>;
status = "disabled";
};
- i2c0: i2c@ffc04000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc04000 0x1000>;
- clocks = <&l4_sp_clk>;
- interrupts = <0 158 0x4>;
- status = "disabled";
- };
-
- i2c1: i2c@ffc05000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc05000 0x1000>;
- clocks = <&l4_sp_clk>;
- interrupts = <0 159 0x4>;
- status = "disabled";
- };
-
- i2c2: i2c@ffc06000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc06000 0x1000>;
- clocks = <&l4_sp_clk>;
- interrupts = <0 160 0x4>;
- status = "disabled";
- };
-
- i2c3: i2c@ffc07000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc07000 0x1000>;
- clocks = <&l4_sp_clk>;
- interrupts = <0 161 0x4>;
- status = "disabled";
- };
-
gpio0: gpio@ff708000 {
#address-cells = <1>;
#size-cells = <0>;
};
};
- sdr: sdr@ffc25000 {
- compatible = "syscon";
- reg = <0xffc25000 0x1000>;
+ i2c0: i2c@ffc04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc04000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 158 0x4>;
+ status = "disabled";
};
- sdramedac {
- compatible = "altr,sdram-edac";
- altr,sdr-syscon = <&sdr>;
- interrupts = <0 39 4>;
+ i2c1: i2c@ffc05000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc05000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 159 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc06000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc06000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 160 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc07000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc07000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 161 0x4>;
+ status = "disabled";
};
L2: l2-cache@fffef000 {
reg = <0xffff0000 0x10000>;
};
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
+ };
+
+ scu: snoop-control-unit@fffec000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfffec000 0x100>;
+ };
+
+ sdr: sdr@ffc25000 {
+ compatible = "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
+
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
+
spi0: spi@fff00000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
status = "disabled";
};
- scu: snoop-control-unit@fffec000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0xfffec000 0x100>;
- };
-
spi1: spi@fff01000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
status = "disabled";
};
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
dma-names = "tx", "rx";
};
- rst: rstmgr@ffd05000 {
- #reset-cells = <1>;
- compatible = "altr,rst-mgr";
- reg = <0xffd05000 0x1000>;
- altr,modrst-offset = <0x10>;
- };
-
usbphy0: usbphy@0 {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&osc1>;
status = "disabled";
};
-
- sysmgr: sysmgr@ffd08000 {
- compatible = "altr,sys-mgr", "syscon";
- reg = <0xffd08000 0x4000>;
- };
};
};
compatible = "snps,designware-i2c";
reg = <0xffc02200 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02300 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02400 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02500 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02600 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,dwc2";
reg = <0xffb40000 0xffff>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
status = "okay";
};
+&i2c1 {
+ speed-mode = <0>;
+ status = "okay";
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <6000>;
+ i2c-scl-falling-time-ns = <6000>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
&uart1 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+};
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
- ste,config = <&gpio_out_lo>;
+ ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <6>;
label = "extkb4";
gpios = <&gpio5 2 0x4>;
aliases {
ttyAS0 = &sbc_serial0;
+ ethernet0 = ðernet0;
};
};
<ST_IRQ_SYSCFG_DISABLED>;
};
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
status = "disabled";
};
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
status = "disabled";
};
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
status = "disabled";
};
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
status = "disabled";
};
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
status = "disabled";
};
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
status = "disabled";
};
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
status = "disabled";
};
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
+
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
+
+ status = "disabled";
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ ethernet0: dwmac@9630000 {
+ device_type = "network";
+ status = "disabled";
+ compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0x9630000 0x8000>, <0x80 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ st,syscon = <&syscfg_sbc_reg 0x80>;
+ st,gmac_en;
+ resets = <&softreset STIH407_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+
+ interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupt-names = "macirq", "eth_wake_irq";
+
+ /* DMA Bus Mode */
+ snps,pbl = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_ETH_PHY>;
};
};
};
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
pio0: gpio@09610000 {
st,retime-pin-mask = <0x3f>;
};
+ cec0 {
+ pinctrl_cec0_default: cec0-default {
+ st,pins {
+ hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+ };
+ };
+ };
+
rc {
pinctrl_ir: ir0 {
st,pins {
ir = <&pio4 0 ALT2 IN>;
};
};
+
+ pinctrl_uhf: uhf0 {
+ st,pins {
+ ir = <&pio4 1 ALT2 IN>;
+ };
+ };
+
+ pinctrl_tx: tx0 {
+ st,pins {
+ tx = <&pio4 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_tx_od: tx_od0 {
+ st,pins {
+ tx_od = <&pio4 3 ALT2 OUT>;
+ };
+ };
};
/* SBC_ASC0 - UART10 */
rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
- rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
- phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
};
};
phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
+
+ pinctrl_rmii1: rmii1-0 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk: rmii1_phyclk {
+ st,pins {
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+ st,pins {
+ phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+ };
+ };
};
pwm1 {
};
};
};
+
+ spi10 {
+ pinctrl_spi10_default: spi10-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 OUT>;
+ mrst = <&pio4 7 ALT1 IN>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi11 {
+ pinctrl_spi11_default: spi11-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 OUT>;
+ mrst = <&pio3 0 ALT2 IN>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi12 {
+ pinctrl_spi12_default: spi12-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 OUT>;
+ mrst = <&pio3 4 ALT2 IN>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+ };
};
pin-controller-front0 {
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
pio10: pio@09200000 {
};
i2c3 {
- pinctrl_i2c3_default: i2c3-default {
+ pinctrl_i2c3_default: i2c3-alt1-0 {
st,pins {
sda = <&pio18 6 ALT1 BIDIR>;
scl = <&pio18 5 ALT1 BIDIR>;
};
};
+ pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+ st,pins {
+ sda = <&pio17 7 ALT1 BIDIR>;
+ scl = <&pio17 6 ALT1 BIDIR>;
+ };
+ };
+ pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+ st,pins {
+ sda = <&pio13 6 ALT3 BIDIR>;
+ scl = <&pio13 5 ALT3 BIDIR>;
+ };
+ };
};
spi0 {
- pinctrl_spi0_default: spi0-default {
+ pinctrl_spi0_default: spi0-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 OUT>;
+ mrst = <&pio10 7 ALT2 IN>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 OUT>;
+ mrst = <&pio19 5 ALT1 IN>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1_default: spi1-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 OUT>;
+ mrst = <&pio11 2 ALT2 IN>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
st,pins {
- mtsr = <&pio12 6 ALT2 BIDIR>;
- mrst = <&pio12 7 ALT2 BIDIR>;
- scl = <&pio12 5 ALT2 BIDIR>;
+ mtsr = <&pio14 3 ALT1 OUT>;
+ mrst = <&pio14 4 ALT1 IN>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2_default: spi2-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 OUT>;
+ mrst = <&pio12 7 ALT2 IN>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 OUT>;
+ mrst = <&pio14 7 ALT1 IN>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 OUT>;
+ mrst = <&pio15 7 ALT2 IN>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi3 {
+ pinctrl_spi3_default: spi3-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 OUT>;
+ mrst = <&pio13 7 ALT3 IN>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 OUT>;
+ mrst = <&pio17 5 ALT1 IN>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 OUT>;
+ mrst = <&pio18 7 ALT1 IN>;
+ scl = <&pio18 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+ scl = <&pio18 5 ALT1 OUT>;
};
};
};
};
};
};
+
+ systrace {
+ pinctrl_systrace_default: systrace-default {
+ st,pins {
+ trc_data0 = <&pio11 3 ALT5 OUT>;
+ trc_data1 = <&pio11 4 ALT5 OUT>;
+ trc_data2 = <&pio11 5 ALT5 OUT>;
+ trc_data3 = <&pio11 6 ALT5 OUT>;
+ trc_clk = <&pio11 7 ALT5 OUT>;
+ };
+ };
+ };
};
pin-controller-front1 {
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
tsin4 {
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
pio30: gpio@09220000 {
};
};
};
+
+ spi4 {
+ pinctrl_spi4_default: spi4-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 OUT>;
+ mrst = <&pio30 2 ALT1 IN>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 OUT>;
+ mrst = <&pio34 2 ALT3 IN>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+ };
+
+ serial3 {
+ pinctrl_serial3: serial3-0 {
+ st,pins {
+ tx = <&pio31 3 ALT1 OUT>;
+ rx = <&pio31 4 ALT1 IN>;
+ };
+ };
+ };
};
pin-controller-flash {
emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
};
};
+ pinctrl_sd0: sd0-0 {
+ st,pins {
+ sd_clk = <&pio40 6 ALT1 BIDIR>;
+ sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+ sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+ sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+ sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+ sd_led = <&pio42 0 ALT2 OUT>;
+ sd_pwren = <&pio42 2 ALT2 OUT>;
+ sd_vsel = <&pio42 3 ALT2 OUT>;
+ sd_cd = <&pio42 4 ALT2 IN>;
+ sd_wp = <&pio42 5 ALT2 IN>;
+ };
+ };
+ };
+
+ fsm {
+ pinctrl_fsm: fsm {
+ st,pins {
+ spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+ spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+ spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+ spi-fsm-miso = <&pio40 3 ALT1 IN>;
+ spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+ spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+ };
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand {
+ st,pins {
+ nand_cs1 = <&pio40 6 ALT3 OUT>;
+ nand_cs0 = <&pio40 7 ALT3 OUT>;
+ nand_d0 = <&pio41 0 ALT3 BIDIR>;
+ nand_d1 = <&pio41 1 ALT3 BIDIR>;
+ nand_d2 = <&pio41 2 ALT3 BIDIR>;
+ nand_d3 = <&pio41 3 ALT3 BIDIR>;
+ nand_d4 = <&pio41 4 ALT3 BIDIR>;
+ nand_d5 = <&pio41 5 ALT3 BIDIR>;
+ nand_d6 = <&pio41 6 ALT3 BIDIR>;
+ nand_d7 = <&pio41 7 ALT3 BIDIR>;
+ nand_we = <&pio42 0 ALT3 OUT>;
+ nand_dqs = <&pio42 1 ALT3 OUT>;
+ nand_ale = <&pio42 2 ALT3 OUT>;
+ nand_cle = <&pio42 3 ALT3 OUT>;
+ nand_rnb = <&pio42 4 ALT3 IN>;
+ nand_oe = <&pio42 5 ALT3 OUT>;
+ };
+ };
};
};
};
#include "stih407-family.dtsi"
/ {
soc {
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
-
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
- };
-
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
aliases {
ttyAS0 = &sbc_serial0;
+ ethernet0 = ðernet0;
};
soc {
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
+ ohci0: usb@9a03c00 {
+ status = "okay";
+ };
+
+ ehci0: usb@9a03e00 {
+ status = "okay";
+ };
+
+ ohci1: usb@9a83c00 {
+ status = "okay";
+ };
+
+ ehci1: usb@9a83e00 {
+ status = "okay";
+ };
};
};
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
usb2_picophy2: phy3 {
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY1_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
ohci0: usb@9a03c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci0: usb@9a03e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ohci1: usb@9a83c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci1: usb@9a83e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
- };
-
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ status = "disabled";
};
sti-display-subsystem {
aliases {
ttyAS0 = &sbc_serial0;
+ ethernet0 = ðernet0;
};
soc {
st_dwc3: dwc3@8f94000 {
status = "okay";
};
+
+ ethernet0: dwmac@9630000 {
+ st,tx-retime-src = "clkgen";
+ status = "okay";
+ phy-mode = "rgmii";
+ fixed-link = <0 1 1000 0 0>;
+ };
};
};
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+ compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
phys = <&usb2_picophy2>;
phy-names = "usb";
};
+
+ mmc0: sdhci@09060000 {
+ assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ assigned-clock-parents = <&clk_s_c0_pll1 0>;
+ assigned-clock-rates = <200000000>;
+ };
};
};
};
};
+ pwm0: pwm@9810000 {
+ status = "okay";
+ };
+
+ pwm1: pwm@9510000 {
+ status = "okay";
+ };
+
i2c@9842000 {
status = "okay";
};
status = "okay";
};
+ ethernet0: dwmac@9630000 {
+ st,tx-retime-src = "clkgen";
+ status = "okay";
+ phy-mode = "rgmii";
+ fixed-link = <0 1 1000 0 0>;
+ };
};
};
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
&lradc {
vref-supply = <®_vcc3v0>;
status = "okay";
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Gemei G9 Tablet";
/*
* TODO:
* 2x cameras via CSI
- * bma250 IRQs
+ * audio
* AXP battery management
* NAND
* OTG
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
-
- /*
- * TODO: interrupt pins:
- * int1 - PH00
- * int2 - PI10
- */
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "iNet-1";
+ compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@1000 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "INet-97F Rev 02";
};
};
-&ehci0 {
- status = "okay";
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
};
&ehci1 {
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@600 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+
+ button@800 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
+ button@1200 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1200000>;
};
};
status = "okay";
};
-&ohci0 {
+&otg_sram {
status = "okay";
};
-&ohci1 {
- status = "okay";
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
};
-®_usb1_vbus {
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "iNet-9F Rev 03";
+ compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@600 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+
+ button@800 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
emac_power_pin_q5: emac_power_pin@0 {
allwinner,pins = "PH19";
};
};
+®_usb0_vbus {
+ regulator-boot-on;
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_marsboard: led_pins@0 {
allwinner,pins = "PB5", "PB6", "PB7", "PB8";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_usb1_vbus {
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&mdio {
status = "okay";
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_pcduino: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
-®_usb1_vbus {
- status = "okay";
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
};
-®_usb2_vbus {
- status = "okay";
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
};
&uart0 {
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */
+ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */
status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+ model = "LinkSprite pcDuino2";
+ compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&pio {
+ usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
+ allwinner,pins = "PD2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb2_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
+ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Point of View Protab2-IPS9";
+ compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ /* pull-ups and devices require AXP209 LDO3 */
+ status = "failed";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@400 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+
+ button@800 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
clock-output-names = "pll1";
};
+ pll2: clk@01c20008 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll2-clk";
+ reg = <0x01c20008 0x8>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll2-1x", "pll2-2x",
+ "pll2-4x", "pll2-8x";
+ };
+
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
};
+
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
+ reg = <0x01c20140 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "codec";
+ };
};
soc@01c00000 {
status = "disabled";
};
+ codec: codec@01c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec";
+ reg = <0x01c22c00 0x40>;
+ interrupts = <30>;
+ clocks = <&apb0_gates 0>, <&codec_clk>;
+ clock-names = "apb", "codec";
+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
+ <&dma SUN4I_DMA_NORMAL 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Auxtek t003 A10s hdmi tv-stick";
+ compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_t003>;
+
+ red {
+ label = "t003-tv-dongle:red:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+ default-state = "on";
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp152: pmic@30 {
+ compatible = "x-powers,axp152";
+ reg = <0x30>;
+ interrupts = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_t003: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG13";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PB10";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
status = "okay";
at24@50 {
- compatible = "at,24c16";
+ compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
read-only;
--- /dev/null
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "A10s-Wobo i5";
+ compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_wobo_i5>;
+
+ blue {
+ label = "a10s-wobo-i5:blue:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_wobo>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_b>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ led_pins_wobo_i5: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
+ allwinner,pins = "PB3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ emac_power_pin_wobo: emac_power_pin@0 {
+ allwinner,pins = "PA02";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb1_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
};
clocks {
#size-cells = <0>;
};
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun5i-a10s-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- uart3_pins_a: uart3@0 {
- allwinner,pins = "PG9", "PG10";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
emac_pins_a: emac0@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ emac_pins_b: emac0@1 {
+ allwinner,pins = "PD6", "PD7", "PD10",
+ "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD18", "PD19", "PD20",
+ "PD21", "PD22", "PD23", "PD24",
+ "PD25", "PD26", "PD27";
+ allwinner,function = "emac";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "INet-98V Rev 02";
+ compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A13 Tablet";
+ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_ldo3>;
+};
"apb1_uart3";
};
};
+
+ soc@01c00000 {
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun5i-a13-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
};
&cpu0 {
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ /* TODO: backlight uses axp gpio1 as enable pin */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+&i2c1 {
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PG12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "NextThing C.H.I.P.";
+ compatible = "nextthing,chip", "allwinner,sun5i-r8";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+
+ /*
+ * The interrupt is routed through the "External Fast
+ * Interrupt Request" pin (ball G13 of the module)
+ * directly to the main interrupt controller, without
+ * any other controller interfering.
+ */
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+
+ xio: gpio@38 {
+ compatible = "nxp,pcf8574a";
+ reg = <0x38>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ chip_vbus_pin: chip_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ chip_id_det_pin: chip_id_det_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "cpuvdd";
+ regulator-always-on;
+};
+
+®_dcdc3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "corevdd";
+ regulator-always-on;
+};
+
+®_ldo1 {
+ regulator-name = "rtcvdd";
+};
+
+®_ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+ regulator-always-on;
+};
+
+®_ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8";
+};
+
+®_usb0_vbus {
+ pinctrl-0 = <&chip_vbus_pin>;
+ vin-supply = <®_vcc5v0>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>,
+ <&uart3_pins_cts_rts_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&chip_id_det_pin>;
+ status = "okay";
+
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_vcc5v0>;
+};
--- /dev/null
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
+/ {
+ chosen {
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+};
#include "skeleton.dtsi"
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
clock-output-names = "pll1";
};
+ pll2: clk@01c20008 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun5i-a13-pll2-clk";
+ reg = <0x01c20008 0x8>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll2-1x", "pll2-2x",
+ "pll2-4x", "pll2-8x";
+ };
+
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
clock-output-names = "usb_ohci0", "usb_phy";
};
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
+ reg = <0x01c20140 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "codec";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-mbus-clk";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PG9", "PG10";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_pins_cts_rts_a: uart3-cts-rts@0 {
+ allwinner,pins = "PG11", "PG12";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ pwm0_pins: pwm0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
timer@01c20c00 {
status = "disabled";
};
+ codec: codec@01c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec";
+ reg = <0x01c22c00 0x40>;
+ interrupts = <30>;
+ clocks = <&apb0_gates 0>, <&codec_clk>;
+ clock-names = "apb", "codec";
+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
+ <&dma SUN4I_DMA_NORMAL 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
chosen {
stdout-path = "serial0:115200n8";
};
+
+ i2c_lcd: i2c@0 {
+ /* The lcd panel i2c interface is hooked up via gpios */
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_lcd_pins>;
+ gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
+ <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+ i2c-gpio,delay-us = <5>;
+ };
};
&ehci1 {
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
+
+ mma8452: mma8452@1d {
+ compatible = "fsl,mma8452";
+ reg = <0x1d>;
+ interrupt-parent = <&pio>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+ };
};
&mmc0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ i2c_lcd_pins: i2c_lcd_pin@0 {
+ allwinner,pins = "PA23", "PA24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_usb2_vbus {
compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
aliases {
+ rtc0 = &pcf8563;
+ rtc1 = &rtc;
serial0 = &uart0;
};
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc3>;
+};
+
&ehci0 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
phy = <&phy1>;
phy-mode = "rgmii";
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
- vmmc-supply = <&vcc_3v0>;
+ vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
- vmmc-supply = <&vcc_wifi>;
+ vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
};
&pio {
+ gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
+ allwinner,pins = "PA21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
&p2wi {
status = "okay";
- axp221: pmic@68 {
+ axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- dcdc1-supply = <&vcc_3v0>;
- dcdc5-supply = <&vcc_dram>;
-
- regulators {
- x-powers,dcdc-freq = <3000>;
-
- vcc_3v0: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
- };
-
- vdd_cpu: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-cpu";
- };
-
- vdd_gpu: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-gpu";
- };
-
- vdd_sys_dll: dcdc4 {
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-sys-dll";
- };
-
- vcc_dram: dcdc5 {
- regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vcc-dram";
- };
-
- vcc_wifi: aldo1 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_wifi";
- };
-
- avcc: aldo3 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
- };
- };
};
};
+#include "axp22x.dtsi"
+
+®_aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dc5ldo {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
®_usb1_vbus {
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
status = "okay";
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ simplefb_hdmi: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
status = "disabled";
};
- framebuffer@1 {
+ simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc2_8bit_emmc_pins: mmc2@1 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15",
+ "PC24";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
reg = <0x01c20ca0 0x20>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
rtp: rtp@01c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
--- /dev/null
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "MSI Primo81 tablet";
+ compatible = "msi,primo81", "allwinner,sun6i-a31s";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc3>;
+};
+
+&ehci0 {
+ /* rtl8188etv wifi is connected here */
+ status = "okay";
+};
+
+&i2c0 {
+ /* pull-ups and device VDDIO use AXP221 DLDO3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "failed";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ ctp@5d {
+ pinctrl-names = "default";
+ pinctrl-0 = <>911_int_primo81>;
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+
+ accelerometer@1c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mma8452_int_primo81>;
+ compatible = "fsl,mma8452";
+ reg = <0x1c>;
+ interrupt-parent = <&pio>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+ #io-channel-cells = <1>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_aldo3>;
+ status = "okay";
+
+ button@158 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <158730>;
+ };
+
+ button@349 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <349206>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ gt911_int_primo81: gt911_int_pin@0 {
+ allwinner,pins = "PA3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mma8452_int_primo81: mma8452_int_pin@0 {
+ allwinner,pins = "PA9";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&p2wi {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dc1sw {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-lcd";
+};
+
+®_dc5ldo {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+ vcc-lcd-supply = <®_dc1sw>;
+ vdd-mipi-bridge-supply = <®_eldo3>;
+};
+
+&usb_otg {
+ /* otg support requires support for AXP221 usb-power-supply and GPIO */
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_dldo1>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Sinlinx SinA31s Core Board";
+ compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dc5ldo {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
--- /dev/null
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sinlinx SinA31s Development Board";
+ compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_sina31s>;
+
+ status {
+ label = "sina31s:status:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ };
+ };
+};
+
+&ehci0 {
+ /* USB 2.0 4 port hub IC */
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ phy-supply = <®_dldo1>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_aldo3>;
+ status = "okay";
+
+ button@158 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <158730>;
+ };
+
+ button@349 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <349206>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pin_sina31s: led_pin@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
+ allwinner,pins = "PA4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-gmac-phy";
+};
+
+&usbphy {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Sinovoip BPI-M2";
+ compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bpi_m2>;
+
+ blue {
+ label = "bpi-m2:blue:usr";
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ };
+
+ green {
+ label = "bpi-m2:green:usr";
+ gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+ };
+
+ red {
+ label = "bpi-m2:red:usr";
+ gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+ };
+ };
+
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc0_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v0>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
+ allwinner,pins = "PA21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_bpi_m2: led_pins@0 {
+ allwinner,pins = "PG5", "PG10", "PG11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
+ allwinner,pins = "PA4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_pio {
+ mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
+ allwinner,pins = "PL8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Yones TopTech BS1078 v2 Tablet";
+ compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+ aliases {
+ serial0 = &uart0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc0_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+®_usb1_vbus {
+ gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PH27";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+ operating-points = <
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1350000
+ 720000 1250000
+ 528000 1150000
+ 312000 1100000
+ 144000 1050000
+ >;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
};
};
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_ahci_5v {
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
#include "axp209.dtsi"
®_dcdc2 {
};
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
--- /dev/null
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Olimex A20-Olimex-SOM-EVB";
+ compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olimex_som_evb>;
+
+ green {
+ label = "a20-olimex-som-evb:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_olimex_som_evb: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&mmc0 {
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
+ allwinner,pins = "PC17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
®_ahci_5v {
status = "okay";
};
+®_usb0_vbus {
+ pinctrl-0 = <&usb0_vbus_pin_lime2>;
+ gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&i2c2 {
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
allwinner,pins = "PH2";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
- allwinner,pins = "PH11";
+ allwinner,pins = "PD2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
status = "okay";
};
-®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
- gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
- status = "okay";
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
};
-®_usb2_vbus {
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+/* A single regulator (U24) powers both USB host ports. */
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
+ usb2_vbus-supply = <®_usb1_vbus>;
status = "okay";
};
allwinner,pins = "PH2";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
+#include "axp209.dtsi"
+
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_pcduino3: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_ahci_5v {
status = "okay";
};
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
};
+#include "axp209.dtsi"
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
-#include "axp209.dtsi"
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
®_dcdc2 {
regulator-always-on;
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
--- /dev/null
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Wits Pro A20 DKT";
+ compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
+ reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
720000 1200000
528000 1100000
312000 1000000
- 144000 900000
+ 144000 1000000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
clock-output-names = "pll1";
};
+ pll2: clk@01c20008 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll2-clk";
+ reg = <0x01c20008 0x8>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll2-1x", "pll2-2x",
+ "pll2-4x", "pll2-8x";
+ };
+
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
clock-output-names = "ir1";
};
+ keypad_clk: clk@01c200c4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200c4 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "keypad";
+ };
+
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
clock-output-names = "spi3";
};
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
+ reg = <0x01c20140 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "codec";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-mbus-clk";
status = "disabled";
};
+ codec: codec@01c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun7i-a20-codec";
+ reg = <0x01c22c00 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 0>, <&codec_clk>;
+ clock-names = "apb", "codec";
+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
+ <&dma SUN4I_DMA_NORMAL 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
clock-output-names = "apb1";
};
- ahb1_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb1>;
- clock-indices = <1>, <6>,
- <8>, <9>, <10>,
- <13>, <14>,
- <19>, <20>,
- <21>, <24>, <26>,
- <29>, <32>, <36>,
- <40>, <44>, <46>,
- <52>, <54>,
- <57>;
- clock-output-names = "ahb1_mipidsi", "ahb1_dma",
- "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
- "ahb1_nand", "ahb1_sdram",
- "ahb1_hstimer", "ahb1_spi0",
- "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
- "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
- "ahb1_csi", "ahb1_be", "ahb1_fe",
- "ahb1_gpu", "ahb1_spinlock",
- "ahb1_drc";
- };
-
apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ pwm0_pins: pwm0 {
+ allwinner,pins = "PH0";
+ allwinner,function = "pwm0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c0";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
+ pwm: pwm@01c21400 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
+ nmi_intc: interrupt-controller@01f00c0c {
+ compatible = "allwinner,sun6i-a31-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01f00c0c 0x38>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
prcm@01f01400 {
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
+ r_rsb_pins: r_rsb {
+ allwinner,pins = "PL0", "PL1";
+ allwinner,function = "s_rsb";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
r_uart_pins_a: r_uart@0 {
allwinner,pins = "PL2", "PL3";
allwinner,function = "s_uart";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+ r_rsb: rsb@01f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Allwinner GT90H Quad Core Tablet (v4)";
+ compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+
+ button@600 {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+ /* FIXME this really is aldo1, correct once we've pmic support */
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
- * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
- * and it uses different camera sensors.
- */
-
-#include "sun8i-a23-ippo-q8h-v5.dts"
-
-/ {
- model = "Ippo Q8H Dual Core Tablet (v1.2)";
- compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
-};
--- /dev/null
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
+++ /dev/null
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
- model = "Ippo Q8H Dual Core Tablet (v5)";
- compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
- aliases {
- serial0 = &r_uart;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- /* pull-ups and devices require PMIC regulator */
- status = "failed";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
-};
-
-&pio {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-};
-
-&r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
--- /dev/null
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A23 Tablet";
+ compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
};
clocks {
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-indices = <1>, <6>,
+ <8>, <9>, <10>,
+ <13>, <14>,
+ <19>, <20>,
+ <21>, <24>, <26>,
+ <29>, <32>, <36>,
+ <40>, <44>, <46>,
+ <52>, <53>,
+ <54>, <57>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+ "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_drc";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
+++ /dev/null
-/*
- * Copyright 2015 Vishnu Patekar
- * Vishnu Patekar <vishnupatekar0510@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
- model = "ET Q8 Quad Core Tablet (v1.6)";
- compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
--- /dev/null
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
- model = "Ippo Q8H Quad Core Tablet (v1.2)";
- compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
-
- aliases {
- serial0 = &r_uart;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
-};
-
-&pio {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-};
-
-&r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
--- /dev/null
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A33 Tablet";
+ compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
};
};
+&r_rsb {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
clock-output-names = "pll11";
};
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-indices = <1>, <5>,
+ <6>, <8>, <9>,
+ <10>, <13>, <14>,
+ <19>, <20>,
+ <21>, <24>, <26>,
+ <29>, <32>, <36>,
+ <40>, <44>, <46>,
+ <52>, <53>,
+ <54>, <57>,
+ <58>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+ "ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
+ "ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_drc",
+ "ahb1_sat";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "ss";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
};
soc@01c00000 {
+ crypto: crypto-engine@01c15000 {
+ compatible = "allwinner,sun4i-a10-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 5>, <&ss_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 5>;
+ reset-names = "ahb";
+ };
+
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en_pin_q8>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ /* backlight is powered by AXP223 DC1SW */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ bl_en_pin_q8: bl_en_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_rsb {
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ status = "okay";
+};
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 246>;
+ */
};
apbmisc@70000800 {
vin-ldo9-10-supply = <&vdd_5v0_sys>;
vin-ldo11-supply = <&vdd_3v3_run>;
- sd0 {
+ vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
non-removable;
};
+ /* CPU DFLL clock */
+ clock@0,70110000 {
+ status = "okay";
+ vdd-cpu-supply = <&vdd_cpu>;
+ nvidia,i2c-fs-rate = <400000>;
+ };
+
ahub@0,70300000 {
i2s@0,70301100 {
status = "okay";
};
};
+ cpus {
+ cpu@0 {
+ vdd-cpu-supply = <&vdd_cpu>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 251>;
+ */
};
apbdma: dma@0,60020000 {
sata@0,70020000 {
compatible = "nvidia,tegra124-ahci";
-
reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
- <0x0 0x70020000 0x0 0x7000>; /* SATA */
-
+ <0x0 0x70020000 0x0 0x7000>; /* SATA */
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
clocks = <&tegra_car TEGRA124_CLK_SATA>,
- <&tegra_car TEGRA124_CLK_SATA_OOB>,
- <&tegra_car TEGRA124_CLK_CML1>,
- <&tegra_car TEGRA124_CLK_PLL_E>;
+ <&tegra_car TEGRA124_CLK_SATA_OOB>,
+ <&tegra_car TEGRA124_CLK_CML1>,
+ <&tegra_car TEGRA124_CLK_PLL_E>;
clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
resets = <&tegra_car 124>,
- <&tegra_car 123>,
- <&tegra_car 129>;
+ <&tegra_car 123>,
+ <&tegra_car 129>;
reset-names = "sata", "sata-oob", "sata-cold";
-
phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
phy-names = "sata-phy";
-
status = "disabled";
};
reg = <0x0 0x70030000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_HDA>,
- <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA124_CLK_HDA2HDMI>,
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 224>;
+ */
};
apbmisc@70000800 {
<&tegra_car TEGRA20_CLK_PLL_E>;
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
+ <&tegra_car 72>,
+ <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
};
};
+ hda@70030000 {
+ status = "okay";
+ };
+
sd1: sdhci@78000000 {
status = "okay";
bus-width = <4>;
usb-phy@7d000000 {
status = "okay";
+ dr_mode = "otg";
vbus-supply = <&usbo1_vbus_reg>;
};
backlight: backlight {
compatible = "pwm-backlight";
- /* PWM0 */
+ /* PWM_BKL1 */
pwms = <&pwm 0 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
gpio-key,wakeup;
};
#include "tegra30.dtsi"
/*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
+ * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
*/
/ {
model = "Toradex Apalis T30";
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&sys_3v3_reg>;
- pll-supply = <&vio_reg>;
+ vdd-supply = <&avdd_hdmi_3v3_reg>;
+ pll-supply = <&avdd_hdmi_pll_1v8_reg>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
/* Apalis BKL1_PWM */
uart3_rts_n_pc0 {
- nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
uart3_cts_n_pa1 {
- nvidia,pins = "uart3_cts_n_pa1";
- nvidia,function = "rsvd1";
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis CAN1 on SPI6 */
spi2_cs0_n_px3 {
- nvidia,pins = "spi2_cs0_n_px3",
- "spi2_miso_px1",
- "spi2_mosi_px0",
- "spi2_sck_px2";
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis CAN2 on SPI4 */
gmi_a16_pj7 {
- nvidia,pins = "gmi_a16_pj7",
- "gmi_a17_pb0",
- "gmi_a18_pb1",
- "gmi_a19_pk7";
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis Digital Audio */
+ clk1_req_pee2 {
+ nvidia,pins = "clk1_req_pee2";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk2_out_pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1_fs_pn0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis I2C3 */
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
/* Apalis MMC1 */
sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6",
- "sdmmc3_cmd_pa7";
+ nvidia,pins = "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_dat0_pb7 {
- nvidia,pins = "sdmmc3_dat0_pb7",
- "sdmmc3_dat1_pb6",
- "sdmmc3_dat2_pb5",
- "sdmmc3_dat3_pb4",
- "sdmmc3_dat4_pd1",
- "sdmmc3_dat5_pd0",
- "sdmmc3_dat6_pd3",
- "sdmmc3_dat7_pd4";
+ nvidia,pins = "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis PWM1 */
- gpio_pu6 {
- nvidia,pins = "gpio_pu6";
+ pu6 {
+ nvidia,pins = "pu6";
nvidia,function = "pwm3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis PWM2 */
- gpio_pu5 {
- nvidia,pins = "gpio_pu5";
+ pu5 {
+ nvidia,pins = "pu5";
nvidia,function = "pwm2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis PWM3 */
- gpio_pu4 {
- nvidia,pins = "gpio_pu4";
+ pu4 {
+ nvidia,pins = "pu4";
nvidia,function = "pwm1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis PWM4 */
- gpio_pu3 {
- nvidia,pins = "gpio_pu3";
+ pu3 {
+ nvidia,pins = "pu3";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc1_cmd_pz1 {
- nvidia,pins = "sdmmc1_cmd_pz1",
- "sdmmc1_dat0_py7",
- "sdmmc1_dat1_py6",
- "sdmmc1_dat2_py5",
- "sdmmc1_dat3_py4";
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis SPI1 */
spi1_sck_px5 {
- nvidia,pins = "spi1_sck_px5",
- "spi1_mosi_px4",
- "spi1_miso_px7",
- "spi1_cs0_n_px6";
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis SPI2 */
lcd_sck_pz4 {
- nvidia,pins = "lcd_sck_pz4",
- "lcd_sdout_pn5",
- "lcd_sdin_pz2",
- "lcd_cs0_n_pn4";
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
nvidia,function = "spi5";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis UART1 */
ulpi_data0 {
- nvidia,pins = "ulpi_data0_po1",
- "ulpi_data1_po2",
- "ulpi_data2_po3",
- "ulpi_data3_po4",
- "ulpi_data4_po5",
- "ulpi_data5_po6",
- "ulpi_data6_po7",
- "ulpi_data7_po0";
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis UART2 */
ulpi_clk_py0 {
- nvidia,pins = "ulpi_clk_py0",
- "ulpi_dir_py1",
- "ulpi_nxt_py2",
- "ulpi_stp_py3";
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis UART3 */
uart2_rxd_pc3 {
- nvidia,pins = "uart2_rxd_pc3",
- "uart2_txd_pc2";
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Apalis UART4 */
uart3_rxd_pw7 {
- nvidia,pins = "uart3_rxd_pw7",
- "uart3_txd_pw6";
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* eMMC (On-module) */
sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- "sdmmc4_rst_n_pcc3";
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* LVDS Transceiver Configuration */
pbb0 {
- nvidia,pins = "pbb0",
- "pbb7",
- "pcc1",
- "pcc2";
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
};
pbb3 {
- nvidia,pins = "pbb3",
- "pbb4",
- "pbb5",
- "pbb6";
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
nvidia,function = "displayb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,sys-clock-req-active-high;
};
+ /* eMMC */
sdhci@78000600 {
status = "okay";
bus-width = <8>;
#address-cells = <1>;
#size-cells = <0>;
- sys_3v3_reg: regulator@100 {
+ avdd_hdmi_pll_1v8_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vio_reg>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
regulator-name = "3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- charge_pump_5v0_reg: regulator@101 {
+ avdd_hdmi_3v3_reg: regulator@102 {
compatible = "regulator-fixed";
- reg = <101>;
+ reg = <102>;
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ charge_pump_5v0_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/* M41T0M6 real time clock on carrier board */
rtc@68 {
- compatible = "stm,m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
};
};
};
+ /* SD/MMC */
sdhci@78000200 {
status = "okay";
bus-width = <4>;
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
gpio-key,wakeup;
};
#include "tegra30.dtsi"
/*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
*/
/ {
model = "Toradex Colibri T30";
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&sys_3v3_reg>;
- pll-supply = <&vio_reg>;
+ vdd-supply = <&avdd_hdmi_3v3_reg>;
+ pll-supply = <&avdd_hdmi_pll_1v8_reg>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
/* Colibri Backlight PWM<A> */
sdmmc3_dat3_pb4 {
- nvidia,pins = "sdmmc3_dat3_pb4";
+ nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /* Thermal alert, need to be disabled */
- lcd_dc1_pd2 {
- nvidia,pins = "lcd_dc1_pd2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- };
-
/* Colibri MMC */
kb_row10_ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
kb_row11_ps3 {
- nvidia,pins = "kb_row11_ps3",
- "kb_row12_ps4",
- "kb_row13_ps5",
- "kb_row14_ps6",
- "kb_row15_ps7";
+ nvidia,pins = "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
nvidia,function = "sdmmc2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Colibri SSP */
ulpi_clk_py0 {
- nvidia,pins = "ulpi_clk_py0",
- "ulpi_dir_py1",
- "ulpi_nxt_py2",
- "ulpi_stp_py3";
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_dat6_pd3 {
- nvidia,pins = "sdmmc3_dat6_pd3",
- "sdmmc3_dat7_pd4";
+ nvidia,pins = "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
/* Colibri UART_A */
ulpi_data0 {
- nvidia,pins = "ulpi_data0_po1",
- "ulpi_data1_po2",
- "ulpi_data2_po3",
- "ulpi_data3_po4",
- "ulpi_data4_po5",
- "ulpi_data5_po6",
- "ulpi_data6_po7",
- "ulpi_data7_po0";
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Colibri UART_B */
gmi_a16_pj7 {
- nvidia,pins = "gmi_a16_pj7",
- "gmi_a17_pb0",
- "gmi_a18_pb1",
- "gmi_a19_pk7";
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* Colibri UART_C */
uart2_rxd {
- nvidia,pins = "uart2_rxd_pc3",
- "uart2_txd_pc2";
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
/* eMMC */
sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- "sdmmc4_rst_n_pcc3";
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+
+ /* Power I2C (On-module) */
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd_dc1_pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* TOUCH_PEN_INT# */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
};
};
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also v3_3 fixed supply
+ * see also 3v3 fixed supply
*/
ldo2_reg: ldo2 {
regulator-name = "en_3v3";
};
};
+ /* STMPE811 touch screen controller */
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
/*
* LM95245 temperature sensor
* Note: OVERT_N directly connected to PMIC PWRDN
nvidia,sys-clock-req-active-high;
};
- emmc: sdhci@78000600 {
+ /* eMMC */
+ sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
#address-cells = <1>;
#size-cells = <0>;
- sys_3v3_reg: regulator@100 {
+ avdd_hdmi_pll_1v8_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vio_reg>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
regulator-name = "3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- charge_pump_5v0_reg: regulator@101 {
+ avdd_hdmi_3v3_reg: regulator@102 {
compatible = "regulator-fixed";
- reg = <101>;
+ reg = <102>;
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ charge_pump_5v0_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
<&tegra_car TEGRA30_CLK_CML0>;
clock-names = "pex", "afi", "pll_e", "cml";
resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
+ <&tegra_car 72>,
+ <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
resets = <&tegra_car 24>,
- <&tegra_car 98>;
+ <&tegra_car 98>;
reset-names = "3d", "3d2";
};
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 248>;
+ */
};
apbmisc@70000800 {
};
i2c@7000c000 {
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
reg = <0x70030000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_HDA>,
- <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA30_CLK_HDA2HDMI>,
<&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <100000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
usb0: usb@5a800100 {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
- interrupts = <0 50 4>;
+ interrupts = <0 52 4>;
};
&serial0 {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(768 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <400000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
usb2: usb@5a800100 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+ <0x506c0000 0x400>;
+ interrupts = <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+ <0x506c8000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <400000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
pinctrl: pinctrl@5f801000 {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
<0x20000100 0x100>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <400000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
usb0: usb@5a800100 {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(256 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <100000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
usb0: usb@5a800100 {
--- /dev/null
+/*
+ * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Gentil Board";
+ compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Vodka Board";
+ compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ next-level-cache = <&l2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ next-level-cache = <&l2>;
};
};
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(1280 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
clock-frequency = <400000>;
};
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
};
pinctrl: pinctrl@5f801000 {
pinctrl-0 = <&pinctrl_i2c0>;
};
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <32>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
>;
};
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
model = "Toradex Colibri VF50 on Colibri Evaluation Board";
compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
};
+
+&touchscreen {
+ vf50-ts-min-pressure = <200>;
+ status = "okay";
+};
memory {
reg = <0x80000000 0x8000000>;
};
+
+ touchscreen: vf50-touchscreen {
+ compatible = "toradex,vf50-touchscreen";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "idle","default","gpios";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>;
+ pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ status = "disabled";
+ };
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_touchctrl_idle: touchctrl_idle {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x006d
+ VF610_PAD_PTA19__GPIO_9 0x006c
+ >;
+ };
+
+ pinctrl_touchctrl_default: touchctrl_default {
+ fsl,pins = <
+ VF610_PAD_PTA18__ADC0_SE0 0x0040
+ VF610_PAD_PTA19__ADC0_SE1 0x0040
+ VF610_PAD_PTA16__ADC1_SE0 0x0040
+ VF610_PAD_PTB2__ADC1_SE2 0x0040
+ >;
+ };
+
+ pinctrl_touchctrl_gpios: touchctrl_gpios {
+ fsl,pins = <
+ VF610_PAD_PTA23__GPIO_13 0x22e9
+ VF610_PAD_PTB23__GPIO_93 0x22e9
+ VF610_PAD_PTA22__GPIO_12 0x22e9
+ VF610_PAD_PTA11__GPIO_4 0x22e9
+ >;
+ };
+ };
};
>;
};
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD31__NF_IO15 0x28df
+ VF610_PAD_PTD30__NF_IO14 0x28df
+ VF610_PAD_PTD29__NF_IO13 0x28df
+ VF610_PAD_PTD28__NF_IO12 0x28df
+ VF610_PAD_PTD27__NF_IO11 0x28df
+ VF610_PAD_PTD26__NF_IO10 0x28df
+ VF610_PAD_PTD25__NF_IO9 0x28df
+ VF610_PAD_PTD24__NF_IO8 0x28df
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
};
};
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
status = "disabled";
};
+ nfc: nand@400e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-nfc";
+ reg = <0x400e0000 0x4000>;
+ interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_NFC>;
+ clock-names = "nfc";
+ status = "disabled";
+ };
+
i2c2: i2c@400e6000 {
#address-cells = <1>;
#size-cells = <0>;
cpu {
device_type = "cpu";
- compatible = "arm,arm1176ej-s";
+ compatible = "arm,arm1176jzf";
};
};
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V4_V5=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
CONFIG_AEABI=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_FB=y
CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=m
-CONFIG_AVERAGE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_ACORN_8x8=y
+++ /dev/null
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
CONFIG_DM_CRYPT=m
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
+CONFIG_USB_RTL8152=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
-CONFIG_MWIFIEX=y
-CONFIG_MWIFIEX_SDIO=y
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
-CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_MAX77802=y
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
+CONFIG_CMA=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_SUSPEND is not set
CONFIG_IP_PIMSM_V2=y
CONFIG_INET_AH=y
CONFIG_INET_IPCOMP=y
-CONFIG_IPV6=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_SCTP=y
CONFIG_VLAN_8021Q=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMA_CMA=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_TI_KEYSTONE_NETCP=y
CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_SYSCON=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_KEYSTONE=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_SOC_TI=y
CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
+CONFIG_KEYSTONE_IRQ=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_DAVINCI=y
-CONFIG_LEDS_CLASS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_KEYSTONE_IRQ=y
-CONFIG_GPIO_SYSCON=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_SPI_NXP_SPIFI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SRAM=y
CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
+CONFIG_I2C_LPC2K=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM75=y
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_MFD_SYSCON=y
+CONFIG_LPC18XX_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LPC24XX=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
+CONFIG_LPC18XX_DMAMUX=y
+CONFIG_MEMORY=y
+CONFIG_ARM_PL172_MPMC=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC18XX_SCT=y
+CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_EXT2_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRC_ITU_T=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_NSP=y
CONFIG_ARCH_BCM_21664=y
CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
CONFIG_CAN_AT91=m
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_MCP251X=y
+CONFIG_CAN_SUN4I=y
CONFIG_BT=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_IGB=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=m
CONFIG_KS8851=y
CONFIG_R8169=y
CONFIG_SH_ETH=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
+CONFIG_I2C_RK3X=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_ST=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER=y
+CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_RSPI=y
CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SPIDEV=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_DRM=y
+CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_DW_HDMI=m
CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_WM9712=m
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=m
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=m
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_OMAP_USB3=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
+CONFIG_USB_MSM_OTG=m
CONFIG_USB_MXS_PHY=y
CONFIG_USB_RCAR_PHY=m
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_MAX77802=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_IMX_DMA=y
CONFIG_MXS_DMA=y
CONFIG_DMA_OMAP=y
+CONFIG_QCOM_BAM_DMA=y
CONFIG_XILINX_VDMA=y
CONFIG_DMA_SUN6I=y
CONFIG_STAGING=y
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMEM=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC_CHARDEV=m
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_PM_DEVFREQ=y
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
CONFIG_AT91_ADC=m
+CONFIG_BERLIN2_ADC=m
CONFIG_EXYNOS_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_TCB=m
CONFIG_PWM_RENESAS_TPU=y
+CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_BERLIN_SATA=y
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_PHY_QCOM_APQ8064_SATA=m
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
CONFIG_PHY_RCAR_GEN2=m
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
CONFIG_AHCI_MVEBU=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_MVSDIO=y
-CONFIG_LEDS_GPIO=y
+CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_SOUND=y
CONFIG_MSM_LCC_8960=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
+CONFIG_HWSPINLOCK_QCOM=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMEM=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V7=y
+CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
CONFIG_AEABI=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_NET=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_SSB=m
+CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_SOC_CAMERA_OV2640=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_USB_G_SERIAL=y
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_DRM=y
+CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_MERAM=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_USB_DWC2_HOST=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
+CONFIG_FPGA=y
+CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_SUN4I=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_WM9712=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
+#ifndef CONFIG_CPU_V6 /* MIN ARCH >= V6K */
case 1:
asm volatile("@ __xchg1\n"
"1: ldrexb %0, [%3]\n"
: "r" (x), "r" (ptr)
: "memory", "cc");
break;
+ case 2:
+ asm volatile("@ __xchg2\n"
+ "1: ldrexh %0, [%3]\n"
+ " strexh %1, %2, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+ : "=&r" (ret), "=&r" (tmp)
+ : "r" (x), "r" (ptr)
+ : "memory", "cc");
+ break;
+#endif
case 4:
asm volatile("@ __xchg4\n"
"1: ldrex %0, [%3]\n"
--- /dev/null
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CACHE_UNIPHIER
+int uniphier_cache_init(void);
+int uniphier_cache_l2_is_enabled(void);
+void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
+void uniphier_cache_l2_set_locked_ways(u32 way_mask);
+#else
+static inline int uniphier_cache_init(void)
+{
+ return -ENODEV;
+}
+
+static inline int uniphier_cache_l2_is_enabled(void)
+{
+ return 0;
+}
+
+static inline void uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+}
+
+static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+}
+#endif
+
+#endif /* __CACHE_UNIPHIER_H */
#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc")
#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc")
+
+#ifndef CONFIG_CPU_V7M
+#define local_abt_enable() __asm__("cpsie a @ __sta" : : : "memory", "cc")
+#define local_abt_disable() __asm__("cpsid a @ __cla" : : : "memory", "cc")
+#else
+#define local_abt_enable() do { } while (0)
+#define local_abt_disable() do { } while (0)
+#endif
#else
/*
: "memory", "cc"); \
})
+#define local_abt_enable() do { } while (0)
+#define local_abt_disable() do { } while (0)
#endif
/*
unsigned l2c_aux_val; /* L2 cache aux value */
unsigned l2c_aux_mask; /* L2 cache aux mask */
void (*l2c_write_sec)(unsigned long, unsigned);
- struct smp_operations *smp; /* SMP operations */
+ const struct smp_operations *smp; /* SMP operations */
bool (*smp_init)(void);
void (*fixup)(struct tag *, char **);
void (*dt_fixup)(void);
*/
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Allow 16MB-aligned ioremap pages
*/
#define IOREMAP_MAX_ORDER 24
+#endif
#else /* CONFIG_MMU */
*/
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END 0xff000000UL
+#define VMALLOC_END 0xff800000UL
#define LIBRARY_TEXT_START 0x0c000000
struct of_cpu_method {
const char *method;
- struct smp_operations *ops;
+ const struct smp_operations *ops;
};
#define CPU_METHOD_OF_DECLARE(name, _method, _ops) \
/*
* set platform specific SMP operations
*/
-extern void smp_set_ops(struct smp_operations *);
+extern void smp_set_ops(const struct smp_operations *);
#endif /* ifndef __ASM_ARM_SMP_H */
*/
#define __NR_syscalls (392)
-/*
- * *NOTE*: This is a ghost syscall private to the kernel. Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence. Don't ever use this from user code.
- */
-#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0)
-
#define __ARCH_WANT_STAT64
#define __ARCH_WANT_SYS_GETHOSTNAME
#define __ARCH_WANT_SYS_PAUSE
*
*/
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2)
-/* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
-#else
-/* On sama5d2, use UART1 as low level serial console */
-#define AT91_DBGU 0xf8020000
-#endif
-
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
+#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
.macro addruart, rp, rv, tmp
- ldr \rp, =AT91_DBGU @ System peripherals (phys address)
- ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address)
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
if (of_property_read_u32(cpu, "reg", &hwid)) {
pr_debug(" * %s missing reg property\n",
cpu->full_name);
+ of_node_put(cpu);
return;
}
* 8 MSBs must be set to 0 in the DT since the reg property
* defines the MPIDR[23:0].
*/
- if (hwid & ~MPIDR_HWID_BITMASK)
+ if (hwid & ~MPIDR_HWID_BITMASK) {
+ of_node_put(cpu);
return;
+ }
/*
* Duplicate MPIDRs are a recipe for disaster.
* to avoid matching valid MPIDR[23:0] values.
*/
for (j = 0; j < cpuidx; j++)
- if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg "
- "properties in the DT\n"))
+ if (WARN(tmp_map[j] == hwid,
+ "Duplicate /cpu reg properties in the DT\n")) {
+ of_node_put(cpu);
return;
+ }
/*
* Build a stashed array of MPIDR values. Numbering scheme
"max cores %u, capping them\n",
cpuidx, nr_cpu_ids)) {
cpuidx = nr_cpu_ids;
+ of_node_put(cpu);
break;
}
.endm
.macro kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
- !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
#ifndef CONFIG_MMU
#warning "NPTL on non MMU needs fixing"
#else
__kuser_cmpxchg64: @ 0xffff0f60
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
- /*
- * Poor you. No fast solution possible...
- * The kernel itself must perform the operation.
- * A special ghost syscall is used for that (see traps.c).
- */
- stmfd sp!, {r7, lr}
- ldr r7, 1f @ it's 20 bits
- swi __ARM_NR_cmpxchg64
- ldmfd sp!, {r7, pc}
-1: .word __ARM_NR_cmpxchg64
-
-#elif defined(CONFIG_CPU_32v6K)
+#if defined(CONFIG_CPU_32v6K)
stmfd sp!, {r4, r5, r6, r7}
ldrd r4, r5, [r0] @ load old val
__kuser_cmpxchg: @ 0xffff0fc0
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
- /*
- * Poor you. No fast solution possible...
- * The kernel itself must perform the operation.
- * A special ghost syscall is used for that (see traps.c).
- */
- stmfd sp!, {r7, lr}
- ldr r7, 1f @ it's 20 bits
- swi __ARM_NR_cmpxchg
- ldmfd sp!, {r7, pc}
-1: .word __ARM_NR_cmpxchg
-
-#elif __LINUX_ARM_ARCH__ < 6
+#if __LINUX_ARM_ARCH__ < 6
#ifdef CONFIG_MMU
#include <asm/cputype.h>
#include <asm/current.h>
#include <asm/hw_breakpoint.h>
-#include <asm/kdebug.h>
#include <asm/traps.h>
/* Breakpoint currently in use for each BRP. */
#include <linux/export.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/cache-uniphier.h>
#include <asm/outercache.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
if (ret)
pr_err("L2C: failed to init: %d\n", ret);
}
+
+ uniphier_cache_init();
}
#ifdef CONFIG_MULTI_IRQ_HANDLER
void
sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
{
- struct pt_regs *thread_regs;
+ struct thread_info *ti;
int regno;
/* Just making sure... */
gdb_regs[regno] = 0;
/* Otherwise, we have only some registers from switch_to() */
- thread_regs = task_pt_regs(task);
- gdb_regs[_R0] = thread_regs->ARM_r0;
- gdb_regs[_R1] = thread_regs->ARM_r1;
- gdb_regs[_R2] = thread_regs->ARM_r2;
- gdb_regs[_R3] = thread_regs->ARM_r3;
- gdb_regs[_R4] = thread_regs->ARM_r4;
- gdb_regs[_R5] = thread_regs->ARM_r5;
- gdb_regs[_R6] = thread_regs->ARM_r6;
- gdb_regs[_R7] = thread_regs->ARM_r7;
- gdb_regs[_R8] = thread_regs->ARM_r8;
- gdb_regs[_R9] = thread_regs->ARM_r9;
- gdb_regs[_R10] = thread_regs->ARM_r10;
- gdb_regs[_FP] = thread_regs->ARM_fp;
- gdb_regs[_IP] = thread_regs->ARM_ip;
- gdb_regs[_SPT] = thread_regs->ARM_sp;
- gdb_regs[_LR] = thread_regs->ARM_lr;
- gdb_regs[_PC] = thread_regs->ARM_pc;
- gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
+ ti = task_thread_info(task);
+ gdb_regs[_R4] = ti->cpu_context.r4;
+ gdb_regs[_R5] = ti->cpu_context.r5;
+ gdb_regs[_R6] = ti->cpu_context.r6;
+ gdb_regs[_R7] = ti->cpu_context.r7;
+ gdb_regs[_R8] = ti->cpu_context.r8;
+ gdb_regs[_R9] = ti->cpu_context.r9;
+ gdb_regs[_R10] = ti->cpu_context.sl;
+ gdb_regs[_FP] = ti->cpu_context.fp;
+ gdb_regs[_SPT] = ti->cpu_context.sp;
+ gdb_regs[_PC] = ti->cpu_context.pc;
}
void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
return 0;
}
-void __ref psci_cpu_die(unsigned int cpu)
+void psci_cpu_die(unsigned int cpu)
{
u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
PSCI_0_2_POWER_STATE_TYPE_SHIFT;
panic("psci: cpu %d failed to shutdown\n", cpu);
}
-int __ref psci_cpu_kill(unsigned int cpu)
+int psci_cpu_kill(unsigned int cpu)
{
int err, i;
static struct smp_operations smp_ops;
-void __init smp_set_ops(struct smp_operations *ops)
+void __init smp_set_ops(const struct smp_operations *ops)
{
if (ops)
smp_ops = *ops;
local_irq_enable();
local_fiq_enable();
+ local_abt_enable();
/*
* OK, it's off to the idle thread for us
static void raise_nmi(cpumask_t *mask)
{
+ /*
+ * Generate the backtrace directly if we are running in a calling
+ * context that is not preemptible by the backtrace IPI. Note
+ * that nmi_cpu_backtrace() automatically removes the current cpu
+ * from mask.
+ */
+ if (cpumask_test_cpu(smp_processor_id(), mask) && irqs_disabled())
+ nmi_cpu_backtrace(NULL);
+
smp_cross_call(mask, IPI_CPU_BACKTRACE);
}
#include <linux/of_irq.h>
#include <linux/of_address.h>
-#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
/* set up by the platform code */
static DEFINE_PER_CPU(bool, percpu_setup_called);
static struct clock_event_device __percpu *twd_evt;
+static unsigned int twd_features =
+ CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
static int twd_ppi;
static int twd_shutdown(struct clock_event_device *clk)
writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
clk->name = "local_timer";
- clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_C3STOP;
+ clk->features = twd_features;
clk->rating = 350;
clk->set_state_shutdown = twd_shutdown;
clk->set_state_periodic = twd_set_periodic;
goto out_irq;
twd_get_clock(np);
+ if (!of_property_read_bool(np, "always-on"))
+ twd_features |= CLOCK_EVT_FEAT_C3STOP;
/*
* Immediately configure the timer on the boot CPU, unless we need
{
int err;
- if (!is_smp() || !setup_max_cpus)
- return;
-
twd_ppi = irq_of_parse_and_map(np, 0);
if (!twd_ppi) {
err = -EINVAL;
set_tls(regs->ARM_r0);
return 0;
-#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
- /*
- * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
- * Return zero in r0 if *MEM was changed or non-zero if no exchange
- * happened. Also set the user C flag accordingly.
- * If access permissions have to be fixed up then non-zero is
- * returned and the operation has to be re-attempted.
- *
- * *NOTE*: This is a ghost syscall private to the kernel. Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence. Don't ever use this from user code.
- */
- case NR(cmpxchg):
- for (;;) {
- extern void do_DataAbort(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs);
- unsigned long val;
- unsigned long addr = regs->ARM_r2;
- struct mm_struct *mm = current->mm;
- pgd_t *pgd; pmd_t *pmd; pte_t *pte;
- spinlock_t *ptl;
-
- regs->ARM_cpsr &= ~PSR_C_BIT;
- down_read(&mm->mmap_sem);
- pgd = pgd_offset(mm, addr);
- if (!pgd_present(*pgd))
- goto bad_access;
- pmd = pmd_offset(pgd, addr);
- if (!pmd_present(*pmd))
- goto bad_access;
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
- pte_unmap_unlock(pte, ptl);
- goto bad_access;
- }
- val = *(unsigned long *)addr;
- val -= regs->ARM_r0;
- if (val == 0) {
- *(unsigned long *)addr = regs->ARM_r1;
- regs->ARM_cpsr |= PSR_C_BIT;
- }
- pte_unmap_unlock(pte, ptl);
- up_read(&mm->mmap_sem);
- return val;
-
- bad_access:
- up_read(&mm->mmap_sem);
- /* simulate a write access fault */
- do_DataAbort(addr, 15 + (1 << 11), regs);
- }
-#endif
-
default:
/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
if not implemented, rather than raising SIGILL. This
depends on MMU && OF
select PREEMPT_NOTIFIERS
select ANON_INODES
+ select ARM_GIC
select HAVE_KVM_CPU_RELAX_INTERCEPT
select HAVE_KVM_ARCH_TLB_FLUSH_ALL
select KVM_MMIO
*/
err = kvm_timer_hyp_init();
if (err)
- goto out_free_mappings;
+ goto out_free_context;
#ifndef CONFIG_HOTPLUG_CPU
free_boot_hyp_pgd();
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
.text
*/
ENTRY(__clear_user_std)
WEAK(arm_clear_user)
+UNWIND(.fnstart)
+UNWIND(.save {r1, lr})
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
USER( strnebt r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
+UNWIND(.fnend)
ENDPROC(arm_clear_user)
ENDPROC(__clear_user_std)
select COMMON_CLK_AT91
select PINCTRL
select PINCTRL_AT91
+ select PINCTRL_AT91PIO4
select SOC_BUS
if ARCH_AT91
* @r2: base address of second SDRAM Controller or 0 if not present
* @r3: pm information
*/
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+ .align 3
ENTRY(at91_pm_suspend_in_sram)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
+config ARCH_BCM_NSP
+ bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ help
+ Support for Broadcom Northstar Plus SoC.
+ Broadcom Northstar Plus family of SoCs are used for switching control
+ and management applications as well as residential router/gateway
+ applications. The SoC features dual core Cortex A9 ARM CPUs,
+ integrating several peripheral interfaces including multiple Gigabit
+ Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+ NAND flash, SATA and several other IO controllers.
+
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARCH_BCM_IPROC
select BCM7120_L2_IRQ
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select SOC_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
#
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# Cygnus
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+ "brcm,nsp",
+ NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
*/
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+static void __init brcmstb_init_irq(void)
+{
+ irqchip_init();
+ brcmstb_biuctrl_init();
+}
+
static const char *const brcmstb_match[] __initconst = {
"brcm,bcm7445",
"brcm,brcmstb",
DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
.dt_compat = brcmstb_match,
+ .init_irq = brcmstb_init_irq,
MACHINE_END
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
- select PINCTRL_BERLIN_BG2
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
- select PINCTRL_BERLIN_BG2CD
config MACH_BERLIN_BG2Q
bool "Marvell Armada 1500 Pro (BG2-Q)"
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select PINCTRL_BERLIN_BG2Q
endif
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
+static void __init berlin_init_late(void)
+{
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
static const char * const berlin_dt_compat[] = {
"marvell,berlin",
NULL,
DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
.dt_compat = berlin_dt_compat,
+ .init_late = berlin_init_late,
/*
* with DT probing for L2CCs, berlin_init_machine can be removed.
* Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#define CPU_RESET 0x00
+/*
+ * There are two reset registers, one with self-clearing (SC)
+ * reset and one with non-self-clearing reset (NON_SC).
+ */
+#define CPU_RESET_SC 0x00
+#define CPU_RESET_NON_SC 0x20
#define RESET_VECT 0x00
#define SW_RESET_ADDR 0x94
{
u32 val;
- val = readl(cpu_ctrl + CPU_RESET);
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
val |= BIT(cpu_logical_map(cpu));
- writel(val, cpu_ctrl + CPU_RESET);
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
}
static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
iounmap(scu_base);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void berlin_cpu_die(unsigned int cpu)
+{
+ v7_exit_coherency_flush(louis);
+ while (1)
+ cpu_do_idle();
+}
+
+static int berlin_cpu_kill(unsigned int cpu)
+{
+ u32 val;
+
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
+
+ return 1;
+}
+#endif
+
static struct smp_operations berlin_smp_ops __initdata = {
.smp_prepare_cpus = berlin_smp_prepare_cpus,
.smp_boot_secondary = berlin_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = berlin_cpu_die,
+ .cpu_kill = berlin_cpu_kill,
+#endif
};
CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
/*
* The CNS PCI bridge doesn't fit into the PCI hierarchy, though
- * we still want to access it. For this to work, we must place
- * the first device on the same bus as the CNS PCI bridge.
+ * we still want to access it.
+ * We place the host bridge on bus 0, and the directly connected
+ * device on bus 1, slot 0.
*/
if (busno == 0) { /* internal PCIe bus, host bridge device */
if (devfn == 0) /* device# and function# are ignored by hw */
}
}
+static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
+ int where, int size, u32 val)
+{
+ void __iomem *base = cnspci->host_regs + (where & 0xffc);
+ u32 v;
+ u32 mask = (0x1ull << (size * 8)) - 1;
+ int shift = (where % 4) * 8;
+
+ v = readl_relaxed(base + (where & 0xffc));
+
+ v &= ~(mask << shift);
+ v |= (val & mask) << shift;
+
+ writel_relaxed(v, base + (where & 0xffc));
+ readl_relaxed(base + (where & 0xffc));
+}
+
static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
{
- int port = cnspci->port;
- struct pci_sys_data sd = {
- .private_data = cnspci,
- };
- struct pci_bus bus = {
- .number = 0,
- .ops = &cns3xxx_pcie_ops,
- .sysdata = &sd,
- };
u16 mem_base = cnspci->res_mem.start >> 16;
u16 mem_limit = cnspci->res_mem.end >> 16;
u16 io_base = cnspci->res_io.start >> 16;
u16 io_limit = cnspci->res_io.end >> 16;
- u32 devfn = 0;
- u8 tmp8;
- u16 pos;
- u16 dc;
-
- pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
- pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
- pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
- pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
- pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
- pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
-
- pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
- pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
- pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
- pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
+ cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
+ cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
+ cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
+ cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
+ cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
+ cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
+ cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
if (!cnspci->linked)
return;
/* Set Device Max_Read_Request_Size to 128 byte */
- bus.number = 1; /* directly connected PCIe device */
- devfn = PCI_DEVFN(0, 0);
- pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
- pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- if (dc & PCI_EXP_DEVCTL_READRQ) {
- dc &= ~PCI_EXP_DEVCTL_READRQ;
- pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
- pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- if (dc & PCI_EXP_DEVCTL_READRQ)
- pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n");
- else
- pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n");
- }
+ pcie_bus_config = PCIE_BUS_PEER2PEER;
+
/* Disable PCIe0 Interrupt Mask INTA to INTD */
- __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+ __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
}
static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
if (status < 0)
return status;
- dev_dbg(&dm6446evm_msp->dev,
- "PINS: %02x %02x %02x %02x\n",
- buf[0], buf[1], buf[2], buf[3]);
+ dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
return (buf[3] << 8) | buf[2];
}
{
unsigned long flags;
- if (clk == NULL || IS_ERR(clk))
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
unsigned long clk_get_rate(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
+ return 0;
return clk->rate;
}
unsigned long flags;
int ret = -EINVAL;
- if (clk == NULL || IS_ERR(clk))
- return ret;
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
+ return -EINVAL;
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
{
unsigned long flags;
- if (clk == NULL || IS_ERR(clk))
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
return -EINVAL;
/* Cannot change parent on enabled clock */
config ARCH_DIGICOLOR
bool "Conexant Digicolor SoC Support"
depends on ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select DIGICOLOR_TIMER
select GENERIC_IRQ_CHIP
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_DIGICOLOR
select ARM_GIC
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
+ select EXYNOS_SROM if PM
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_DEV_MFC
+ select SOC_SAMSUNG
select SRAM
select THERMAL
select MFD_SYSCON
static struct map_desc exynos4_iodesc[] __initdata = {
{
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
},
};
-static struct map_desc exynos5_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
- .length = 144 * SZ_1K,
- .type = MT_DEVICE,
- },
-};
-
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
{
if (soc_is_exynos4())
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos5())
- iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
static void __init exynos_init_io(void)
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_CMU 0x10030000
-#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_DMC1 0x10410000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_L2CC 0x10502000
-#define EXYNOS4_PA_SROMC 0x12570000
-#define EXYNOS5_PA_SROMC 0x12250000
-
-/* Compatibility UART */
-
-#define EXYNOS5440_PA_UART0 0x000B0000
-
#endif /* __ASM_ARCH_MAP_H */
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <asm/mcpm.h>
+#include <asm/smp_plat.h>
#include "regs-pmu.h"
#include "common.h"
cluster >= EXYNOS5420_NR_CLUSTERS)
return -EINVAL;
- exynos_cpu_power_up(cpunr);
+ if (!exynos_cpu_power_state(cpunr)) {
+ exynos_cpu_power_up(cpunr);
+
+ /*
+ * This assumes the cluster number of the big cores(Cortex A15)
+ * is 0 and the Little cores(Cortex A7) is 1.
+ * When the system was booted from the Little core,
+ * they should be reset during power up cpu.
+ */
+ if (cluster &&
+ cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+ /*
+ * Before we reset the Little cores, we should wait
+ * the SPARE2 register is set to 1 because the init
+ * codes of the iROM will set the register after
+ * initialization.
+ */
+ while (!pmu_raw_readl(S5P_PMU_SPARE2))
+ udelay(10);
+
+ pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+ EXYNOS_SWRESET);
+ }
+ }
+
return 0;
}
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(child_domain))
- goto next_pd;
+ continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
- goto next_pd;
+ continue;
parent_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(parent_domain))
- goto next_pd;
+ continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
-next_pd:
- of_node_put(np);
}
return 0;
#define SPREAD_ENABLE 0xF
#define SPREAD_USE_STANDWFI 0xF
+#define EXYNOS5420_KFC_CORE_RESET0 BIT(8)
+#define EXYNOS5420_KFC_ETM_RESET0 BIT(20)
+
+#define EXYNOS5420_KFC_CORE_RESET(_nr) \
+ ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+
#define EXYNOS5420_BB_CON1 0x0784
#define EXYNOS5420_BB_SEL_EN BIT(31)
#define EXYNOS5420_BB_PMOS_EN BIT(7)
+++ /dev/null
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_REGS_SROM_H
-#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW S5P_SROMREG(0x0)
-#define S5P_SROM_BC0 S5P_SROMREG(0x4)
-#define S5P_SROM_BC1 S5P_SROMREG(0x8)
-#define S5P_SROM_BC2 S5P_SROMREG(0xc)
-#define S5P_SROM_BC3 S5P_SROMREG(0x10)
-#define S5P_SROM_BC4 S5P_SROMREG(0x14)
-#define S5P_SROM_BC5 S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
-#define S5P_SROM_BW__ADDRMODE__SHIFT 1
-#define S5P_SROM_BW__WAITENABLE__SHIFT 2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
-
-#define S5P_SROM_BW__CS_MASK 0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT 0
-#define S5P_SROM_BW__NCS1__SHIFT 4
-#define S5P_SROM_BW__NCS2__SHIFT 8
-#define S5P_SROM_BW__NCS3__SHIFT 12
-#define S5P_SROM_BW__NCS4__SHIFT 16
-#define S5P_SROM_BW__NCS5__SHIFT 20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT 0
-#define S5P_SROM_BCX__TACP__SHIFT 4
-#define S5P_SROM_BCX__TCAH__SHIFT 8
-#define S5P_SROM_BCX__TCOH__SHIFT 12
-#define S5P_SROM_BCX__TACC__SHIFT 16
-#define S5P_SROM_BCX__TCOS__SHIFT 24
-#define S5P_SROM_BCX__TACS__SHIFT 28
-
-#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/err.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
+#include <mach/map.h>
+
#include <plat/pm-common.h>
#include "common.h"
#include "exynos-pmu.h"
#include "regs-pmu.h"
-#include "regs-srom.h"
#define REG_TABLE_END (-1U)
u32 mask;
};
-static struct sleep_save exynos_core_save[] = {
- /* SROM side */
- SAVE_ITEM(S5P_SROM_BW),
- SAVE_ITEM(S5P_SROM_BC0),
- SAVE_ITEM(S5P_SROM_BC1),
- SAVE_ITEM(S5P_SROM_BC2),
- SAVE_ITEM(S5P_SROM_BC3),
-};
-
struct exynos_pm_data {
const struct exynos_wkup_irq *wkup_irq;
unsigned int wake_disable_mask;
return 0;
}
-#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init)
+#define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
/*
* The cpu state needs to be saved and restored so that the
/* For release retention */
exynos_pm_release_retention();
- s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
if (cpuid == ARM_CPU_PART_CORTEX_A9)
scu_enable(S5P_VA_SCU);
pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
- s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
early_wakeup:
tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
void imx6sx_pm_init(void);
+void imx6ul_pm_init(void);
#ifdef CONFIG_PM
void imx51_pm_init(void);
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
return 0;
}
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
void __init imx_gpc_check_dt(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6ul_enet_init();
imx_anatop_init();
+ imx6ul_pm_init();
}
static void __init imx6ul_init_irq(void)
imx_init_revision_from_anatop();
imx_src_init();
irqchip_init();
+ imx6_pm_ccm_init("fsl,imx6ul-ccm");
+}
+
+static void __init imx6ul_init_late(void)
+{
+ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+ platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
}
static const char *imx6ul_dt_compat[] __initconst = {
DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)")
.init_irq = imx6ul_init_irq,
.init_machine = imx6ul_init_machine,
+ .init_late = imx6ul_init_late,
.dt_compat = imx6ul_dt_compat,
MACHINE_END
* published by the Free Software Foundation.
*/
#include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* Set RGMII IO voltage to 1.8V */
+ phy_write(dev, 0x1d, 0x1f);
+ phy_write(dev, 0x1e, 0x8);
+
+ /* disable phy AR8031 SmartEEE function. */
+ phy_write(dev, 0xd, 0x3);
+ phy_write(dev, 0xe, 0x805d);
+ phy_write(dev, 0xd, 0x4003);
+ val = phy_read(dev, 0xe);
+ val &= ~(0x1 << 8);
+ phy_write(dev, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+static int bcm54220_phy_fixup(struct phy_device *dev)
+{
+ /* enable RXC skew select RGMII copper mode */
+ phy_write(dev, 0x1e, 0x21);
+ phy_write(dev, 0x1f, 0x7ea8);
+ phy_write(dev, 0x1e, 0x2f);
+ phy_write(dev, 0x1f, 0x71b7);
+
+ return 0;
+}
+
+#define PHY_ID_AR8031 0x004dd074
+#define PHY_ID_BCM54220 0x600d8589
+
+static void __init imx7d_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ ar8031_phy_fixup);
+ phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
+ bcm54220_phy_fixup);
+ }
+}
+
+static void __init imx7d_enet_clk_sel(void)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0);
+ regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0);
+ } else {
+ pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");
+ }
+}
+
+static inline void imx7d_enet_init(void)
+{
+ imx7d_enet_phy_init();
+ imx7d_enet_clk_sel();
+}
+
static void __init imx7d_init_machine(void)
{
struct device *parent;
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx_anatop_init();
+ imx7d_enet_init();
}
static void __init imx7d_init_irq(void)
const char *src_compat;
const char *iomuxc_compat;
const char *gpc_compat;
+ const char *pl310_compat;
const u32 mmdc_io_num;
const u32 *mmdc_io_offset;
};
0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
};
+static const u32 imx6ul_mmdc_io_offset[] __initconst = {
+ 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
+ 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
+ 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
+ 0x494, 0x4b0, /* MODE_CTL, MODE, */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
.mmdc_io_offset = imx6q_mmdc_io_offset,
};
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
.mmdc_io_offset = imx6dl_mmdc_io_offset,
};
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
.gpc_compat = "fsl,imx6sl-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
.gpc_compat = "fsl,imx6sx-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
.mmdc_io_offset = imx6sx_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
+ .mmdc_compat = "fsl,imx6ul-mmdc",
+ .src_compat = "fsl,imx6ul-src",
+ .iomuxc_compat = "fsl,imx6ul-iomuxc",
+ .gpc_compat = "fsl,imx6ul-gpc",
+ .pl310_compat = NULL,
+ .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
+ .mmdc_io_offset = imx6ul_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
- if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
* as we need to float DDR IO.
*/
local_flush_tlb_all();
+ /* check if need to flush internal L2 cache */
+ if (!((struct imx6_cpu_pm_info *)
+ suspend_ocram_base)->l2_base.vbase)
+ flush_cache_all();
imx6_suspend_in_ocram_fn(suspend_ocram_base);
}
suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
MX6Q_SUSPEND_OCRAM_SIZE, false);
+ memset(suspend_ocram_base, 0, sizeof(*pm_info));
pm_info = suspend_ocram_base;
pm_info->pbase = ocram_pbase;
pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
goto gpc_map_failed;
}
- ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
- if (ret) {
- pr_warn("%s: failed to get pl310-cache base %d!\n",
- __func__, ret);
- goto pl310_cache_map_failed;
+ if (socdata->pl310_compat) {
+ ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
+ if (ret) {
+ pr_warn("%s: failed to get pl310-cache base %d!\n",
+ __func__, ret);
+ goto pl310_cache_map_failed;
+ }
}
pm_info->ddr_type = imx_mmdc_get_ddr_type();
{
imx6_pm_common_init(&imx6sx_pm_data);
}
+
+void __init imx6ul_pm_init(void)
+{
+ imx6_pm_common_init(&imx6ul_pm_data);
+}
/* sync L2 cache to drain L2's buffers to DRAM. */
#ifdef CONFIG_CACHE_L2X0
ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+ teq r11, #0
+ beq 6f
mov r6, #0x0
str r6, [r11, #L2X0_CACHE_SYNC]
1:
ldr r6, [r11, #L2X0_CACHE_SYNC]
ands r6, r6, #0x1
bne 1b
+6:
#endif
.endm
}
static const char *const keystone_match[] __initconst = {
+ "ti,k2hk",
+ "ti,k2e",
+ "ti,k2l",
"ti,keystone",
NULL,
};
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
+endif
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
*/
#include <linux/init.h>
#include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+
+#define GPT6_CON_MT65xx 0x10008060
+#define GPT_ENABLE 0x31
+
+static void __init mediatek_timer_init(void)
+{
+ void __iomem *gpt_base;
+
+ if (of_machine_is_compatible("mediatek,mt6589") ||
+ of_machine_is_compatible("mediatek,mt8135") ||
+ of_machine_is_compatible("mediatek,mt8127")) {
+ /* turn on GPT6 which ungates arch timer clocks */
+ gpt_base = ioremap(GPT6_CON_MT65xx, 0x04);
+
+ /* enable clock and set to free-run */
+ writel(GPT_ENABLE, gpt_base);
+ iounmap(gpt_base);
+ }
+
+ of_clk_init(NULL);
+ clocksource_of_init();
+};
static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
.dt_compat = mediatek_board_dt_compat,
+ .init_time = mediatek_timer_init,
MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-mediatek/platsmp.c
+ *
+ * Copyright (c) 2014 Mediatek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ * Yingjoe Chen <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+
+#define MTK_MAX_CPU 8
+#define MTK_SMP_REG_SIZE 0x1000
+
+struct mtk_smp_boot_info {
+ unsigned long smp_base;
+ unsigned int jump_reg;
+ unsigned int core_keys[MTK_MAX_CPU - 1];
+ unsigned int core_regs[MTK_MAX_CPU - 1];
+};
+
+static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
+ 0x80002000, 0x3fc,
+ { 0x534c4131, 0x4c415332, 0x41534c33 },
+ { 0x3f8, 0x3f8, 0x3f8 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt6589_boot = {
+ 0x10002000, 0x34,
+ { 0x534c4131, 0x4c415332, 0x41534c33 },
+ { 0x38, 0x3c, 0x40 },
+};
+
+static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
+ { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
+ { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
+};
+
+static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+ { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
+};
+
+static void __iomem *mtk_smp_base;
+static const struct mtk_smp_boot_info *mtk_smp_info;
+
+static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (!mtk_smp_base)
+ return -EINVAL;
+
+ if (!mtk_smp_info->core_keys[cpu-1])
+ return -EINVAL;
+
+ writel_relaxed(mtk_smp_info->core_keys[cpu-1],
+ mtk_smp_base + mtk_smp_info->core_regs[cpu-1]);
+
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return 0;
+}
+
+static void __init __mtk_smp_prepare_cpus(unsigned int max_cpus, int trustzone)
+{
+ int i, num;
+ const struct of_device_id *infos;
+
+ if (trustzone) {
+ num = ARRAY_SIZE(mtk_tz_smp_boot_infos);
+ infos = mtk_tz_smp_boot_infos;
+ } else {
+ num = ARRAY_SIZE(mtk_smp_boot_infos);
+ infos = mtk_smp_boot_infos;
+ }
+
+ /* Find smp boot info for this SoC */
+ for (i = 0; i < num; i++) {
+ if (of_machine_is_compatible(infos[i].compatible)) {
+ mtk_smp_info = infos[i].data;
+ break;
+ }
+ }
+
+ if (!mtk_smp_info) {
+ pr_err("%s: Device is not supported\n", __func__);
+ return;
+ }
+
+ if (trustzone) {
+ /* smp_base(trustzone-bootinfo) is reserved by device tree */
+ mtk_smp_base = phys_to_virt(mtk_smp_info->smp_base);
+ } else {
+ mtk_smp_base = ioremap(mtk_smp_info->smp_base, MTK_SMP_REG_SIZE);
+ if (!mtk_smp_base) {
+ pr_err("%s: Can't remap %lx\n", __func__,
+ mtk_smp_info->smp_base);
+ return;
+ }
+ }
+
+ /*
+ * write the address of slave startup address into the system-wide
+ * jump register
+ */
+ writel_relaxed(virt_to_phys(secondary_startup_arm),
+ mtk_smp_base + mtk_smp_info->jump_reg);
+}
+
+static void __init mtk_tz_smp_prepare_cpus(unsigned int max_cpus)
+{
+ __mtk_smp_prepare_cpus(max_cpus, 1);
+}
+
+static void __init mtk_smp_prepare_cpus(unsigned int max_cpus)
+{
+ __mtk_smp_prepare_cpus(max_cpus, 0);
+}
+
+static struct smp_operations mt81xx_tz_smp_ops __initdata = {
+ .smp_prepare_cpus = mtk_tz_smp_prepare_cpus,
+ .smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops);
+
+static struct smp_operations mt6589_smp_ops __initdata = {
+ .smp_prepare_cpus = mtk_smp_prepare_cpus,
+ .smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops);
default ARCH_MESON
select MESON6_TIMER
+config MACH_MESON8B
+ bool "Amlogic Meson8b SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
endif
static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
"amlogic,meson8",
+ "amlogic,meson8b",
NULL,
};
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/mbus.h>
-#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
static void __init mvebu_memblock_reserve(void) {}
#endif
-/*
- * Early versions of Armada 375 SoC have a bug where the BootROM
- * leaves an external data abort pending. The kernel is hit by this
- * data abort as soon as it enters userspace, because it unmasks the
- * data aborts at this moment. We register a custom abort handler
- * below to ignore the first data abort to work around this
- * problem.
- */
-static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- static int ignore_first;
-
- if (!ignore_first && fsr == 0x1406) {
- ignore_first = 1;
- return 0;
- }
-
- return 1;
-}
-
static void __init mvebu_init_irq(void)
{
irqchip_init();
BUG_ON(mvebu_mbus_dt_init(coherency_available()));
}
-static void __init external_abort_quirk(void)
-{
- u32 dev, rev;
-
- if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
- return;
-
- hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
- "imprecise external abort");
-}
-
static void __init i2c_quirk(void)
{
struct device_node *np;
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
- if (of_machine_is_compatible("marvell,a375-db"))
- external_abort_quirk();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
unsigned long coherency_phys_base;
void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
/* Coherency fabric registers */
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
int ll_enable_coherency(void);
void ll_add_cpu_to_smp_group(void);
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register. Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
+{
+ u32 reg;
+
+ if (!cpu_config_base)
+ return;
+
+ reg = readl(cpu_config_base);
+ reg &= ~CPU_CONFIG_SHARED_L2;
+ writel(reg, cpu_config_base);
+}
+
static int mvebu_hwcc_notifier(struct notifier_block *nb,
unsigned long event, void *__dev)
{
.notifier_call = mvebu_hwcc_notifier,
};
+static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+ armada_xp_clear_shared_l2();
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_xp_clear_shared_l2_notifier = {
+ .notifier_call = armada_xp_clear_shared_l2_notifier_func,
+ .priority = 100,
+};
+
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
+ struct device_node *cpu_config_np;
of_address_to_resource(np, 0, &res);
coherency_phys_base = res.start;
sync_cache_w(&coherency_phys_base);
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
+
+ cpu_config_np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-xp-cpu-config");
+ if (!cpu_config_np)
+ goto exit;
+
+ cpu_config_base = of_iomap(cpu_config_np, 0);
+ if (!cpu_config_base) {
+ of_node_put(cpu_config_np);
+ goto exit;
+ }
+
+ of_node_put(cpu_config_np);
+
+ register_cpu_notifier(&armada_xp_clear_shared_l2_notifier);
+
+exit:
set_cpu_coherent();
}
pr_warn("Coherency fabric is not initialized\n");
return 1;
}
+
+ armada_xp_clear_shared_l2();
ll_add_cpu_to_smp_group();
return ll_enable_coherency();
}
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, r0, c1, c0, 0 \n\t"
- "tst r0, #(1 << 2) \n\t"
+ "tst r0, %0 \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
- : : : "r0");
+ : : "Ir" (CR_C) : "r0");
pr_debug("Failed to suspend the system\n");
static struct platform_device mvebu_v7_cpuidle_device;
+static int broken_idle(struct device_node *np)
+{
+ if (of_property_read_bool(np, "broken-idle")) {
+ pr_warn("CPU idle is currently broken: disabling\n");
+ return 1;
+ }
+
+ return 0;
+}
+
static __init int armada_370_cpuidle_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
- of_node_put(np);
+
+ if (broken_idle(np))
+ goto end;
/*
* On Armada 370, there is "a slow exit process from the deep
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
+end:
+ of_node_put(np);
return 0;
}
"marvell,armada-380-coherency-fabric");
if (!np)
return -ENODEV;
+
+ if (broken_idle(np))
+ goto end;
+
of_node_put(np);
np = of_find_compatible_node(NULL, NULL,
return -ENODEV;
mpsoc_base = of_iomap(np, 0);
BUG_ON(!mpsoc_base);
- of_node_put(np);
/* Set up reset mask when powering down the cpus */
reg = readl(mpsoc_base + MPCORE_RESET_CTL);
mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
+end:
+ of_node_put(np);
return 0;
}
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
- of_node_put(np);
+
+ if (broken_idle(np))
+ goto end;
mvebu_cpu_resume = armada_370_xp_cpu_resume;
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
+end:
+ of_node_put(np);
return 0;
}
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
-config MACH_VOICEBLUE
- bool "Voiceblue"
- depends on ARCH_OMAP1 && ARCH_OMAP15XX
- help
- Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
- such a board.
-
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- voiceblue_ports[0].irq = gpio_to_irq(12);
- voiceblue_ports[1].irq = gpio_to_irq(13);
- voiceblue_ports[2].irq = gpio_to_irq(14);
- voiceblue_ports[3].irq = gpio_to_irq(15);
- serial_device.dev.platform_data = voiceblue_ports;
- return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
- .width = 2,
- .set_vpp = omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
- .start = OMAP_CS0_PHYS,
- .end = OMAP_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_flash_data,
- },
- .num_resources = 1,
- .resource = &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
- [0] = {
- .start = OMAP_CS2_PHYS + 0x300,
- .end = OMAP_CS2_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device voiceblue_smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
- .resource = voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
- &voiceblue_flash_device,
- &voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
- .hmc_mode = 3,
- .register_host = 1,
- .register_dev = 1,
- .pins[0] = 2,
- .pins[1] = 6,
- .pins[2] = 6,
-};
-
-#define MACHINE_PANICED 1
-#define MACHINE_REBOOTING 2
-#define MACHINE_REBOOT 4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
- void *ptr)
-{
- if (test_and_set_bit(MACHINE_PANICED, &machine_state))
- return NOTIFY_DONE;
-
- /* Flash power LED */
- omap_writeb(0x78, OMAP_LPG1_LCR);
- omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
- .notifier_call = panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- /* Setup panic notifier */
- atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
- return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
- gpio_direction_output(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
- gpio_set_value(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
- if (test_bit(MACHINE_REBOOT, &machine_state))
- return;
-
- wdt_gpio_state = !wdt_gpio_state;
- gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
- * "Global Software Reset Affects Traffic Controller Frequency".
- */
- if (cpu_is_omap5912()) {
- omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
- omap_writew(0x8, ARM_RSTCT1);
- }
-
- set_bit(MACHINE_REBOOT, &machine_state);
- voiceblue_wdt_enable();
- while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
- /* mux pins for uarts */
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
-
- /* Watchdog */
- gpio_request(0, "Watchdog");
- /* smc91x reset */
- gpio_request(7, "SMC91x reset");
- gpio_direction_output(7, 1);
- udelay(2); /* wait at least 100ns */
- gpio_set_value(7, 0);
- mdelay(50); /* 50ms until PHY ready */
- /* smc91x interrupt pin */
- gpio_request(8, "SMC91x irq");
- /* 16C554 reset*/
- gpio_request(6, "16C554 reset");
- gpio_direction_output(6, 0);
- /* 16C554 interrupt pins */
- gpio_request(12, "16C554 irq");
- gpio_request(13, "16C554 irq");
- gpio_request(14, "16C554 irq");
- gpio_request(15, "16C554 irq");
- irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
- voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
- voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
- platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
- omap_serial_init();
- omap1_usb_init(&voiceblue_usb_config);
- omap_register_i2c_bus(1, 100, NULL, 0);
-
- /* There is a good chance board is going up, so enable power LED
- * (it is connected through invertor) */
- omap_writeb(0x00, OMAP_LPG1_LCR);
- omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
- /* Maintainer: Ladislav Michl <michl@2n.cz> */
- .atag_offset = 0x100,
- .map_io = omap15xx_map_io,
- .init_early = omap1_init_early,
- .init_irq = omap1_init_irq,
- .handle_irq = omap1_handle_irq,
- .init_machine = voiceblue_init,
- .init_late = omap1_init_late,
- .init_time = omap1_timer_init,
- .restart = voiceblue_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /* __ASM_ARCH_VOICEBLUE_H */
-
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config ARCH_OMAP2PLUS
bool
select SOC_BUS
select TI_PRIV_EDMA
select OMAP_IRQCHIP
+ select CLKSRC_TI_32K
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
-obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
-AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Restart code (OMAP4/5 currently in omap4-common.c)
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_machine = omap_generic_init,
- .init_time = omap2_sync32k_timer_init,
+ .init_time = omap_init_time,
.dt_compat = omap242x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_machine = omap_generic_init,
- .init_time = omap2_sync32k_timer_init,
+ .init_time = omap_init_time,
.dt_compat = omap243x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap3_sync32k_timer_init,
+ .init_time = omap_init_time,
.dt_compat = n900_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap3_sync32k_timer_init,
+ .init_time = omap_init_time,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
static const char *const omap36xx_boards_compat[] __initconst = {
+ "ti,omap3630",
"ti,omap36xx",
NULL,
};
.init_early = omap3630_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap3_sync32k_timer_init,
+ .init_time = omap_init_time,
.dt_compat = omap36xx_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
};
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap4_local_timer_init,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
};
DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = dra7xx_map_io,
};
DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.map_io = dra7xx_map_io,
.init_early = dra7xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
- .init_time = omap3_sync32k_timer_init,
+ .init_time = omap_init_time,
.restart = omap3xxx_restart,
MACHINE_END
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.init_late = omap3430_init_late,
- .init_time = omap3_sync32k_timer_init,
+ .init_time = omap_init_time,
.restart = omap3xxx_restart,
MACHINE_END
+++ /dev/null
-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-#define CYCLES_PER_MHZ 1000000
-
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate. Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div = 0;
- u32 unlock_dll = 0;
- u32 c;
- unsigned long validrate, sdrcrate, _mpurate;
- struct omap_sdrc_params *sdrc_cs0;
- struct omap_sdrc_params *sdrc_cs1;
- int ret;
- unsigned long clkrate;
-
- if (!clk || !rate)
- return -EINVAL;
-
- new_div = DIV_ROUND_UP(parent_rate, rate);
- validrate = parent_rate / new_div;
-
- if (validrate != rate)
- return -EINVAL;
-
- sdrcrate = clk_get_rate(sdrc_ick_p);
- clkrate = clk_hw_get_rate(hw);
- if (rate > clkrate)
- sdrcrate <<= ((rate / clkrate) >> 1);
- else
- sdrcrate >>= ((clkrate / rate) >> 1);
-
- ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
- if (ret)
- return -EINVAL;
-
- if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
- pr_debug("clock: will unlock SDRC DLL\n");
- unlock_dll = 1;
- }
-
- /*
- * XXX This only needs to be done when the CPU frequency changes
- */
- _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
- c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
- c += 1; /* for safety */
- c *= SDRC_MPURATE_LOOPS;
- c >>= SDRC_MPURATE_SCALE;
- if (c == 0)
- c = 1;
-
- pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
- clkrate, validrate);
- pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
- if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
- if (sdrc_cs1)
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clkrate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- else
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clkrate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- 0, 0, 0, 0);
- return 0;
-}
-
extern void omap2_init_common_infrastructure(void);
-extern void omap2_sync32k_timer_init(void);
-extern void omap3_sync32k_timer_init(void);
+extern void omap_init_time(void);
extern void omap3_secure_sync32k_timer_init(void);
extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
#include "common.h"
#include "mux.h"
#include "control.h"
-#include "devices.h"
#include "display.h"
#define L3_MODULES_MAX_LEN 12
}
omap_postcore_initcall(omap3_l3_init);
-#if defined(CONFIG_IOMMU_API)
-
-#include <linux/platform_data/iommu-omap.h>
-
-static struct resource omap3isp_resources[] = {
- {
- .start = OMAP3430_ISP_BASE,
- .end = OMAP3430_ISP_BASE + 0x12fc,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP3430_ISP_BASE2,
- .end = OMAP3430_ISP_BASE2 + 0x0600,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 24 + OMAP_INTC_START,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device omap3isp_device = {
- .name = "omap3isp",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap3isp_resources),
- .resource = omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
- .name = "mmu_isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
- if (of_have_populated_dt())
- omap3_isp_iommu.name = "480bd400.mmu";
-
- omap3isp_device.dev.platform_data = pdata;
- omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
- return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
- return 0;
-}
-
-#endif
-
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
+++ /dev/null
-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif
if (val < OMAP2_DEVICETYPE_MASK)
return val;
- if (cpu_is_omap24xx()) {
+ if (soc_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
- } else if (cpu_is_ti81xx()) {
+ } else if (soc_is_ti81xx()) {
val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
} else if (soc_is_am33xx() || soc_is_am43xx()) {
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
- } else if (cpu_is_omap34xx()) {
+ } else if (soc_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
- } else if (cpu_is_omap44xx()) {
+ } else if (soc_is_omap44xx()) {
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
void omap_get_die_id(struct omap_die_id *odi)
{
- if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
+ if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
- if (cpu_is_omap3630()) {
+ if (soc_is_omap3630()) {
cpu_name = "OMAP3630";
} else if (soc_is_am35xx()) {
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
- } else if (cpu_is_ti816x()) {
+ } else if (soc_is_ti816x()) {
cpu_name = "TI816X";
} else if (soc_is_am335x()) {
cpu_name = "AM335X";
} else if (soc_is_am437x()) {
cpu_name = "AM437x";
- } else if (cpu_is_ti814x()) {
+ } else if (soc_is_ti814x()) {
cpu_name = "TI814X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
OMAP3_CHECK_FEATURE(status, SGX);
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
- if (cpu_is_omap3630())
+ if (soc_is_omap3630())
omap_features |= OMAP3_HAS_192MHZ_CLK;
- if (cpu_is_omap3430() || cpu_is_omap3630())
+ if (soc_is_omap3430() || soc_is_omap3630())
omap_features |= OMAP3_HAS_IO_WAKEUP;
- if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+ if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
omap_rev() == OMAP3430_REV_ES3_1_2)
omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
tap_base = tap;
/* XXX What is this intended to do? */
- if (cpu_is_omap34xx())
+ if (soc_is_omap34xx())
tap_prod_id = 0x0210;
else
tap_prod_id = 0x0208;
static const char * __init omap_get_family(void)
{
- if (cpu_is_omap24xx())
+ if (soc_is_omap24xx())
return kasprintf(GFP_KERNEL, "OMAP2");
- else if (cpu_is_omap34xx())
+ else if (soc_is_omap34xx())
return kasprintf(GFP_KERNEL, "OMAP3");
- else if (cpu_is_omap44xx())
+ else if (soc_is_omap44xx())
return kasprintf(GFP_KERNEL, "OMAP4");
else if (soc_is_omap54xx())
return kasprintf(GFP_KERNEL, "OMAP5");
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
-void __ref omap4_cpu_die(unsigned int cpu)
+void omap4_cpu_die(unsigned int cpu)
{
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
return NOTIFY_OK;
}
-static struct notifier_block __refdata irq_hotplug_notifier = {
+static struct notifier_block irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
return 0;
}
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
+IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
- {
- .pa_start = 0x48080000,
- .pa_end = 0x48080000 + SZ_8K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_elm_hwmod,
.clk = "l4ls_gclk",
- .addr = am33xx_elm_addr_space,
.user = OCP_USER_MPU,
};
};
/* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
- {
- .pa_start = 0x50000000,
- .pa_end = 0x50000000 + SZ_8K - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
.slave = &am33xx_gpmc_hwmod,
.clk = "l3s_gclk",
- .addr = am33xx_gpmc_addr_space,
.user = OCP_USER_MPU,
};
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/iommu-omap.h>
-#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "soc.h"
.sysc = &omap3xxx_mailbox_sysc,
};
-static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
- { .name = "dsp", .tx_id = 0, .rx_id = 1 },
-};
-
-static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
- .num_users = 2,
- .num_fifos = 2,
- .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info),
- .info = omap3xxx_mailbox_info,
-};
-
-static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
- { .irq = 26 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.name = "mailbox",
.class = &omap3xxx_mailbox_hwmod_class,
- .mpu_irqs = omap3xxx_mailbox_irqs,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &omap3xxx_mailbox_attrs,
};
/*
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
- {
- .pa_start = 0x48094000,
- .pa_end = 0x480941ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mailbox_hwmod,
- .addr = omap3xxx_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
- {
- .pa_start = 0x4a0f6000,
- .pa_end = 0x4a0f6fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_cfg -> spinlock */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_spinlock_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_spinlock_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_RESET_STATUS),
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
- {
- .pa_start = 0x48078000,
- .pa_end = 0x48078fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_elm_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_elm_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
- {
- .pa_start = 0x50000000,
- .pa_end = 0x500003ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l3_main_1 -> gpmc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_gpmc_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
- {
- .pa_start = 0x4a0f6000,
- .pa_end = 0x4a0f6fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_cfg -> spinlock */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_spinlock_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_spinlock_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
- omap_sdrc_init(NULL, NULL);
+ /*
+ * We still need this for omap2420 and omap3 PM to work, others are
+ * using drivers/misc/sram.c already.
+ */
+ if (of_machine_is_compatible("ti,omap2420") ||
+ of_machine_is_compatible("ti,omap3"))
+ omap_sdrc_init(NULL, NULL);
+
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
}
map++;
- };
+ }
return 0;
}
/* Only 81xx needs custom pwrdm_operations */
if (!cpu_is_ti81xx())
- pwrdm_register_platform_funcs(&omap3_pwrdm_operations);;
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
rev = omap_rev();
/*
* omap_rev bits:
- * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
- * CPU revision (See _REV_ defined in cpu.h) [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ * SoC id bits (0730, 1510, 1710, 2422...) [31:16]
+ * SoC revision (See _REV_ defined in cpu.h) [15:08]
+ * SoC class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
unsigned int omap_rev(void);
}
/*
- * Get the CPU revision for OMAP devices
+ * Get the SoC revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
- * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x(): True for OMAP2430
- * cpu_is_omap343x(): True for OMAP3430
- * cpu_is_omap443x(): True for OMAP4430
- * cpu_is_omap446x(): True for OMAP4460
- * cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * soc_is_omap243x(): True for OMAP2430
+ * soc_is_omap343x(): True for OMAP3430
+ * soc_is_omap443x(): True for OMAP4430
+ * soc_is_omap446x(): True for OMAP4460
+ * soc_is_omap447x(): True for OMAP4470
* soc_is_omap543x(): True for OMAP5430, OMAP5432
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
IS_AM_SUBCLASS(335x, 0x335)
IS_AM_SUBCLASS(437x, 0x437)
-#define cpu_is_omap24xx() 0
-#define cpu_is_omap242x() 0
-#define cpu_is_omap243x() 0
-#define cpu_is_omap34xx() 0
-#define cpu_is_omap343x() 0
-#define cpu_is_ti81xx() 0
-#define cpu_is_ti816x() 0
-#define cpu_is_ti814x() 0
+#define soc_is_omap24xx() 0
+#define soc_is_omap242x() 0
+#define soc_is_omap243x() 0
+#define soc_is_omap34xx() 0
+#define soc_is_omap343x() 0
+#define soc_is_ti81xx() 0
+#define soc_is_ti816x() 0
+#define soc_is_ti814x() 0
#define soc_is_am35xx() 0
#define soc_is_am33xx() 0
#define soc_is_am335x() 0
#define soc_is_am43xx() 0
#define soc_is_am437x() 0
-#define cpu_is_omap44xx() 0
-#define cpu_is_omap443x() 0
-#define cpu_is_omap446x() 0
-#define cpu_is_omap447x() 0
+#define soc_is_omap44xx() 0
+#define soc_is_omap443x() 0
+#define soc_is_omap446x() 0
+#define soc_is_omap447x() 0
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
#define soc_is_dra7xx() 0
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() is_omap24xx()
+# undef soc_is_omap24xx
+# define soc_is_omap24xx() is_omap24xx()
# endif
# if defined (CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() is_omap242x()
+# undef soc_is_omap242x
+# define soc_is_omap242x() is_omap242x()
# endif
# if defined (CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() is_omap243x()
+# undef soc_is_omap243x
+# define soc_is_omap243x() is_omap243x()
# endif
# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# undef cpu_is_omap343x
-# define cpu_is_omap34xx() is_omap34xx()
-# define cpu_is_omap343x() is_omap343x()
+# undef soc_is_omap34xx
+# undef soc_is_omap343x
+# define soc_is_omap34xx() is_omap34xx()
+# define soc_is_omap343x() is_omap343x()
# endif
#else
# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() 1
+# undef soc_is_omap24xx
+# define soc_is_omap24xx() 1
# endif
# if defined(CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() 1
+# undef soc_is_omap242x
+# define soc_is_omap242x() 1
# endif
# if defined(CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() 1
+# undef soc_is_omap243x
+# define soc_is_omap243x() 1
# endif
# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# define cpu_is_omap34xx() 1
+# undef soc_is_omap34xx
+# define soc_is_omap34xx() 1
# endif
# if defined(CONFIG_SOC_OMAP3430)
-# undef cpu_is_omap343x
-# define cpu_is_omap343x() 1
+# undef soc_is_omap343x
+# define soc_is_omap343x() 1
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
- * cpu_is_omap2420(): True for OMAP2420
- * cpu_is_omap2422(): True for OMAP2422
- * cpu_is_omap2423(): True for OMAP2423
- * cpu_is_omap2430(): True for OMAP2430
- * cpu_is_omap3430(): True for OMAP3430
+ * soc_is_omap2420(): True for OMAP2420
+ * soc_is_omap2422(): True for OMAP2422
+ * soc_is_omap2423(): True for OMAP2423
+ * soc_is_omap2430(): True for OMAP2430
+ * soc_is_omap3430(): True for OMAP3430
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-#define cpu_is_omap2420() 0
-#define cpu_is_omap2422() 0
-#define cpu_is_omap2423() 0
-#define cpu_is_omap2430() 0
-#define cpu_is_omap3430() 0
-#define cpu_is_omap3630() 0
+#define soc_is_omap2420() 0
+#define soc_is_omap2422() 0
+#define soc_is_omap2423() 0
+#define soc_is_omap2430() 0
+#define soc_is_omap3430() 0
+#define soc_is_omap3630() 0
#define soc_is_omap5430() 0
/* These are needed for the common code */
#ifdef CONFIG_ARCH_OMAP2PLUS
-#define cpu_is_omap7xx() 0
-#define cpu_is_omap15xx() 0
-#define cpu_is_omap16xx() 0
-#define cpu_is_omap1510() 0
-#define cpu_is_omap1610() 0
-#define cpu_is_omap1611() 0
-#define cpu_is_omap1621() 0
-#define cpu_is_omap1710() 0
+#define soc_is_omap7xx() 0
+#define soc_is_omap15xx() 0
+#define soc_is_omap16xx() 0
+#define soc_is_omap1510() 0
+#define soc_is_omap1610() 0
+#define soc_is_omap1611() 0
+#define soc_is_omap1621() 0
+#define soc_is_omap1710() 0
#define cpu_class_is_omap1() 0
#define cpu_class_is_omap2() 1
#endif
#if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap2420
-# undef cpu_is_omap2422
-# undef cpu_is_omap2423
-# undef cpu_is_omap2430
-# define cpu_is_omap2420() is_omap2420()
-# define cpu_is_omap2422() is_omap2422()
-# define cpu_is_omap2423() is_omap2423()
-# define cpu_is_omap2430() is_omap2430()
+# undef soc_is_omap2420
+# undef soc_is_omap2422
+# undef soc_is_omap2423
+# undef soc_is_omap2430
+# define soc_is_omap2420() is_omap2420()
+# define soc_is_omap2422() is_omap2422()
+# define soc_is_omap2423() is_omap2423()
+# define soc_is_omap2430() is_omap2430()
#endif
#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
+# undef soc_is_omap3430
+# undef soc_is_ti81xx
+# undef soc_is_ti816x
+# undef soc_is_ti814x
# undef soc_is_am35xx
-# define cpu_is_omap3430() is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630() is_omap363x()
-# define cpu_is_ti81xx() is_ti81xx()
-# define cpu_is_ti816x() is_ti816x()
-# define cpu_is_ti814x() is_ti814x()
+# define soc_is_omap3430() is_omap3430()
+# undef soc_is_omap3630
+# define soc_is_omap3630() is_omap363x()
+# define soc_is_ti81xx() is_ti81xx()
+# define soc_is_ti816x() is_ti816x()
+# define soc_is_ti814x() is_ti814x()
# define soc_is_am35xx() is_am35xx()
#endif
#endif
# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx() is_omap44xx()
-# define cpu_is_omap443x() is_omap443x()
-# define cpu_is_omap446x() is_omap446x()
-# define cpu_is_omap447x() is_omap447x()
+# undef soc_is_omap44xx
+# undef soc_is_omap443x
+# undef soc_is_omap446x
+# undef soc_is_omap447x
+# define soc_is_omap44xx() is_omap44xx()
+# define soc_is_omap443x() is_omap443x()
+# define soc_is_omap446x() is_omap446x()
+# define soc_is_omap447x() is_omap447x()
# endif
# if defined(CONFIG_SOC_OMAP5)
#define omap_late_initcall(fn) omap_initcall(late_initcall, fn)
#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
-#endif /* __ASSEMBLY__ */
+/* Legacy defines, these can be removed when users are removed */
+#define cpu_is_omap2420() soc_is_omap2420()
+#define cpu_is_omap2422() soc_is_omap2422()
+#define cpu_is_omap242x() soc_is_omap242x()
+#define cpu_is_omap2430() soc_is_omap2430()
+#define cpu_is_omap243x() soc_is_omap243x()
+#define cpu_is_omap24xx() soc_is_omap24xx()
+#define cpu_is_omap3430() soc_is_omap3430()
+#define cpu_is_omap343x() soc_is_omap343x()
+#define cpu_is_omap34xx() soc_is_omap34xx()
+#define cpu_is_omap3630() soc_is_omap3630()
+#define cpu_is_omap443x() soc_is_omap443x()
+#define cpu_is_omap446x() soc_is_omap446x()
+#define cpu_is_omap44xx() soc_is_omap44xx()
+#define cpu_is_ti814x() soc_is_ti814x()
+#define cpu_is_ti816x() soc_is_ti816x()
+#define cpu_is_ti81xx() soc_is_ti81xx()
+#endif /* __ASSEMBLY__ */
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap3_sram_configure_core_dpll)(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
- BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(
- m2, unlock_dll, f, inc,
- sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
- sdrc_actim_ctrl_b_0, sdrc_mr_0,
- sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
- sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
void omap3_sram_restore_context(void)
{
omap_sram_reset();
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern void omap3_sram_restore_context(void);
/* Do not use these */
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
#ifdef CONFIG_PM
extern void omap_push_sram_idle(void);
#else
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
- .arm
-
- .text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL 0x0
-#define SDRC_UNLOCK_DLL 0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT 24
-#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK 0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf. This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK 0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK 0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK 0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK 0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- * r0 = new M2 divider setting (only 1 and 2 supported right now)
- * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
- * SDRC rates < 83MHz
- * r2 = number of MPU cycles to wait for SDRC to stabilize after
- * reprogramming the SDRC when switching to a slower MPU speed
- * r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- * before use by the code in SRAM (SDRAM is not accessible during SDRC
- * reconfiguration):
- * new SDRC_RFR_CTRL_0 register contents
- * new SDRC_ACTIM_CTRL_A_0 register contents
- * new SDRC_ACTIM_CTRL_B_0 register contents
- * new SDRC_MR_0 register value
- * new SDRC_RFR_CTRL_1 register contents
- * new SDRC_ACTIM_CTRL_A_1 register contents
- * new SDRC_ACTIM_CTRL_B_1 register contents
- * new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers. This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written. If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state. In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM. Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible. Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
- .align 3
-ENTRY(omap3_sram_configure_core_dpll)
- stmfd sp!, {r1-r12, lr} @ store regs to stack
-
- @ pull the extra args off the stack
- @ and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB( adr r7, omap3_sram_configure_core_dpll )
- .macro strtext Rt:req, label:req
- ARM( str \Rt, \label )
- THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] )
- .endm
-
- ldr r4, [sp, #52]
- strtext r4, omap_sdrc_rfr_ctrl_0_val
- ldr r4, [sp, #56]
- strtext r4, omap_sdrc_actim_ctrl_a_0_val
- ldr r4, [sp, #60]
- strtext r4, omap_sdrc_actim_ctrl_b_0_val
- ldr r4, [sp, #64]
- strtext r4, omap_sdrc_mr_0_val
- ldr r4, [sp, #68]
- strtext r4, omap_sdrc_rfr_ctrl_1_val
- cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
- beq skip_cs1_params @ do not use cs1 params
- ldr r4, [sp, #72]
- strtext r4, omap_sdrc_actim_ctrl_a_1_val
- ldr r4, [sp, #76]
- strtext r4, omap_sdrc_actim_ctrl_b_1_val
- ldr r4, [sp, #80]
- strtext r4, omap_sdrc_mr_1_val
-skip_cs1_params:
- mrc p15, 0, r8, c1, c0, 0 @ read ctrl register
- bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction
- mcr p15, 0, r10, c1, c0, 0 @ write ctrl register
- dsb @ flush buffered writes to interconnect
- isb @ prevent speculative exec past here
- cmp r3, #1 @ if increasing SDRC clk rate,
- bleq configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
- bleq unlock_dll
- blne lock_dll
- bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
- bl configure_core_dpll @ change the DPLL3 M2 divider
- mov r12, r2
- bl wait_clk_stable @ wait for SDRC to stabilize
- bl enable_sdrc @ take SDRC out of idle
- cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
- bleq wait_dll_unlock
- blne wait_dll_lock
- cmp r3, #1 @ if increasing SDRC clk rate,
- beq return_to_sdram @ return to SDRAM code, otherwise,
- bl configure_sdrc @ reprogram SDRC regs now
-return_to_sdram:
- mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register
- isb @ prevent speculative exec past here
- mov r0, #0 @ return value
- ldmfd sp!, {r1-r12, pc} @ restore regs and return
-unlock_dll:
- ldr r11, omap3_sdrc_dlla_ctrl
- ldr r12, [r11]
- bic r12, r12, #FIXEDDELAY_MASK
- orr r12, r12, #FIXEDDELAY_DEFAULT
- orr r12, r12, #DLLIDLE_MASK
- str r12, [r11] @ (no OCP barrier needed)
- bx lr
-lock_dll:
- ldr r11, omap3_sdrc_dlla_ctrl
- ldr r12, [r11]
- bic r12, r12, #DLLIDLE_MASK
- str r12, [r11] @ (no OCP barrier needed)
- bx lr
-sdram_in_selfrefresh:
- ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r12, [r11] @ read the contents of SDRC_POWER
- mov r9, r12 @ keep a copy of SDRC_POWER bits
- orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
- str r12, [r11] @ write back to SDRC_POWER register
- ldr r12, [r11] @ posted-write barrier for SDRC
-idle_sdrc:
- ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r12, [r11]
- bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
- str r12, [r11]
-wait_sdrc_idle:
- ldr r11, omap3_cm_idlest1_core
- ldr r12, [r11]
- and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
- cmp r12, #ST_SDRC_MASK
- bne wait_sdrc_idle
- bx lr
-configure_core_dpll:
- ldr r11, omap3_cm_clksel1_pll
- ldr r12, [r11]
- ldr r10, core_m2_mask_val @ modify m2 for core dpll
- and r12, r12, r10
- orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
- str r12, [r11]
- ldr r12, [r11] @ posted-write barrier for CM
- bx lr
-wait_clk_stable:
- subs r12, r12, #1
- bne wait_clk_stable
- bx lr
-enable_sdrc:
- ldr r11, omap3_cm_iclken1_core
- ldr r12, [r11]
- orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
- str r12, [r11]
-wait_sdrc_idle1:
- ldr r11, omap3_cm_idlest1_core
- ldr r12, [r11]
- and r12, r12, #ST_SDRC_MASK
- cmp r12, #0
- bne wait_sdrc_idle1
-restore_sdrc_power_val:
- ldr r11, omap3_sdrc_power
- str r9, [r11] @ restore SDRC_POWER, no barrier needed
- bx lr
-wait_dll_lock:
- ldr r11, omap3_sdrc_dlla_status
- ldr r12, [r11]
- and r12, r12, #LOCKSTATUS_MASK
- cmp r12, #LOCKSTATUS_MASK
- bne wait_dll_lock
- bx lr
-wait_dll_unlock:
- ldr r11, omap3_sdrc_dlla_status
- ldr r12, [r11]
- and r12, r12, #LOCKSTATUS_MASK
- cmp r12, #0x0
- bne wait_dll_unlock
- bx lr
-configure_sdrc:
- ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
- ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
- str r12, [r11] @ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
- ldr r12, omap_sdrc_actim_ctrl_a_0_val
- ldr r11, omap3_sdrc_actim_ctrl_a_0
- str r12, [r11]
- ldr r12, omap_sdrc_actim_ctrl_b_0_val
- ldr r11, omap3_sdrc_actim_ctrl_b_0
- str r12, [r11]
- ldr r12, omap_sdrc_mr_0_val
- ldr r11, omap3_sdrc_mr_0
- str r12, [r11]
-#endif
- ldr r12, omap_sdrc_rfr_ctrl_1_val
- cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
- beq skip_cs1_prog @ do not program cs1 params
- ldr r11, omap3_sdrc_rfr_ctrl_1
- str r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
- ldr r12, omap_sdrc_actim_ctrl_a_1_val
- ldr r11, omap3_sdrc_actim_ctrl_a_1
- str r12, [r11]
- ldr r12, omap_sdrc_actim_ctrl_b_1_val
- ldr r11, omap3_sdrc_actim_ctrl_b_1
- str r12, [r11]
- ldr r12, omap_sdrc_mr_1_val
- ldr r11, omap3_sdrc_mr_1
- str r12, [r11]
-#endif
-skip_cs1_prog:
- ldr r12, [r11] @ posted-write barrier for SDRC
- bx lr
-
- .align
-omap3_sdrc_power:
- .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
- .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
- .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
- .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
- .word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
- .word 0xDEADBEEF
-omap_sdrc_mr_0_val:
- .word 0xDEADBEEF
-omap_sdrc_mr_1_val:
- .word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
- .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
- .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
- .word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
- .word . - omap3_sram_configure_core_dpll
-
of_get_property(np, "ti,timer-secure", NULL)))
continue;
- of_add_property(np, &device_disabled);
+ if (!of_device_is_compatible(np, "ti,omap-counter32k"))
+ of_add_property(np, &device_disabled);
return np;
}
int ret;
struct device_node *np = NULL;
struct omap_hwmod *oh;
- void __iomem *vbase;
const char *oh_name = "counter_32k";
/*
omap_hwmod_setup_one(oh_name);
- if (np) {
- vbase = of_iomap(np, 0);
- of_node_put(np);
- } else {
- vbase = omap_hwmod_get_mpu_rt_va(oh);
- }
-
- if (!vbase) {
- pr_warn("%s: failed to get counter_32k resource\n", __func__);
- return -ENXIO;
- }
-
ret = omap_hwmod_enable(oh);
if (ret) {
pr_warn("%s: failed to enable counter_32k module (%d)\n",
return ret;
}
- ret = omap_init_clocksource_32k(vbase);
- if (ret) {
- pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
- __func__, ret);
- omap_hwmod_idle(oh);
- }
+ if (!of_have_populated_dt()) {
+ void __iomem *vbase;
+
+ vbase = omap_hwmod_get_mpu_rt_va(oh);
+ ret = omap_init_clocksource_32k(vbase);
+ if (ret) {
+ pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
+ __func__, ret);
+ omap_hwmod_idle(oh);
+ }
+ }
return ret;
}
clocksource_gpt.name, clksrc.rate);
}
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
+ const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
+ const char *clksrc_prop, bool gptimer)
+{
+ omap_clk_init();
+ omap_dmtimer_init();
+ omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
+
+ /* Enable the use of clocksource="gp_timer" kernel parameter */
+ if (use_gptimer_clksrc || gptimer)
+ omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
+ clksrc_prop);
+ else
+ omap2_sync32k_clocksource_init();
+}
+
+void __init omap_init_time(void)
+{
+ __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL, false);
+
+ if (of_have_populated_dt())
+ clocksource_of_init();
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
+void __init omap3_secure_sync32k_timer_init(void)
+{
+ __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
+ 2, "timer_sys_ck", NULL, false);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+void __init omap3_gptimer_timer_init(void)
+{
+ __omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
+ 1, "timer_sys_ck", "ti,timer-alwon", true);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+static void __init omap4_sync32k_timer_init(void)
+{
+ __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "sys_clkin_ck", NULL, false);
+}
+
+void __init omap4_local_timer_init(void)
+{
+ omap4_sync32k_timer_init();
+ clocksource_of_init();
+}
+#endif
+
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+
/*
* The realtime counter also called master counter, is a free-running
* counter, which is related to real time. It produces the count used
*/
static void __init realtime_counter_init(void)
{
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
set_cntfreq();
iounmap(base);
-}
-#else
-static inline void __init realtime_counter_init(void)
-{}
#endif
-
-#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src, clksrc_prop) \
-void __init omap##name##_gptimer_timer_init(void) \
-{ \
- omap_clk_init(); \
- omap_dmtimer_init(); \
- omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
- clksrc_prop); \
}
-#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src, clksrc_prop) \
-void __init omap##name##_sync32k_timer_init(void) \
-{ \
- omap_clk_init(); \
- omap_dmtimer_init(); \
- omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
- /* Enable the use of clocksource="gp_timer" kernel parameter */ \
- if (use_gptimer_clksrc) \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
- clksrc_prop); \
- else \
- omap2_sync32k_clocksource_init(); \
-}
-
-#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
- 2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
- 2, "timer_sys_ck", NULL);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
- 2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
- defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
- 1, "timer_sys_ck", "ti,timer-alwon");
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX)
-static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
- 2, "sys_clkin_ck", NULL);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_HAVE_ARM_TWD
-void __init omap4_local_timer_init(void)
-{
- omap4_sync32k_timer_init();
- clocksource_of_init();
-}
-#else
-void __init omap4_local_timer_init(void)
-{
- omap4_sync32k_timer_init();
-}
-#endif /* CONFIG_HAVE_ARM_TWD */
-#endif /* CONFIG_ARCH_OMAP4 */
-
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
void __init omap5_realtime_timer_init(void)
{
omap4_sync32k_timer_init();
}
}
-#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
- OMAP3430_PRM_POLCTRL_CLKREQ_POL)
-#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL
-
/*
* Configure signal polarity for sys_clkreq and sys_off_mode pins
* as the default values are wrong and can cause the system to hang
config MACH_DNS323
bool "D-Link DNS-323"
+ select GENERIC_NET_UTILS
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
config MACH_TS209
bool "QNAP TS-109/TS-209"
+ select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
config MACH_TS409
bool "QNAP TS-409"
+ select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-409 platform.
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
-static int __init dns323_parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init dns323_parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = dns323_parse_hex_nibble(b[0]);
- lo = dns323_parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
static int __init dns323_read_mac_addr(void)
{
u_int8_t addr[6];
- int i;
- char *mac_page;
+ void __iomem *mac_page;
/* MAC address is stored as a regular ol' string in /dev/mtdblock4
* (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
if (!mac_page)
return -ENOMEM;
- /* Sanity check the string we're looking at */
- for (i = 0; i < 5; i++) {
- if (*(mac_page + (i * 3) + 2) != ':') {
- goto error_fail;
- }
- }
-
- for (i = 0; i < 6; i++) {
- int byte;
-
- byte = dns323_parse_hex_byte(mac_page + (i * 3));
- if (byte < 0) {
- goto error_fail;
- }
-
- addr[i] = byte;
- }
+ if (!mac_pton((__force const char *) mac_page, addr))
+ goto error_fail;
iounmap(mac_page);
printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static int __init qnap_tsx09_parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init qnap_tsx09_parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = qnap_tsx09_parse_hex_nibble(b[0]);
- lo = qnap_tsx09_parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
- int i;
- for (i = 0; i < 6; i++) {
- int byte;
-
- /*
- * Enforce "xx:xx:xx:xx:xx:xx\n" format.
- */
- if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
- return -1;
-
- byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
- if (byte < 0)
- return -1;
- addr[i] = byte;
- }
+ if (!mac_pton(addr_str, addr))
+ return -1;
printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
unsigned long addr;
for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
- char *nor_page;
+ void __iomem *nor_page;
int ret = 0;
nor_page = ioremap(addr, 1024);
if (nor_page != NULL) {
- ret = qnap_tsx09_check_mac_addr(nor_page);
+ ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
iounmap(nor_page);
}
*
* Called with IRQs disabled
*/
-void __ref sirfsoc_cpu_die(unsigned int cpu)
+void sirfsoc_cpu_die(unsigned int cpu)
{
platform_do_lowpower(cpu);
}
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#endif
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
- .pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
static void cm_x300_init_bl(void)
{
+ pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
platform_device_register(&cm_x300_backlight_device);
}
#else
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data income_backlight_data = {
- .pwm_id = 0,
.max_brightness = 0x3ff,
.dft_brightness = 0x1ff,
- .pwm_period_ns = 1000000,
.enable_gpio = -1,
};
static void __init income_pwm_init(void)
{
+ pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
platform_device_register(&income_backlight);
}
#else
.end = IRQ_ICP,
.flags = IORESOURCE_IRQ,
},
+ [3] = {
+ .start = 0x40800000,
+ .end = 0x4080001b,
+ .flags = IORESOURCE_MEM,
+ },
+ [4] = {
+ .start = 0x40700000,
+ .end = 0x40700023,
+ .flags = IORESOURCE_MEM,
+ },
+ [5] = {
+ .start = 17,
+ .end = 17,
+ .flags = IORESOURCE_DMA,
+ },
+ [6] = {
+ .start = 18,
+ .end = 18,
+ .flags = IORESOURCE_DMA,
+ },
};
struct platform_device pxa_device_ficp = {
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
#include <linux/gpio.h>
#define GPIO19_GEN1_CAM_RST 19
#define GPIO28_GEN2_CAM_RST 28
+static struct pwm_lookup ezx_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data ezx_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
platform_device_register(&a780_camera);
}
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
*/
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = -1, /* Superseded by pwm_lookup */
.max_brightness = 200,
.dft_brightness = 100,
- .pwm_period_ns = 30923,
.enable_gpio = -1,
};
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
.num_chipselect = 1,
- .clock_enable = CKEN_SSP2,
.enable_dma = 1,
};
};
static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
- .clock_enable = CKEN_SSP3,
.num_chipselect = 2,
.enable_dma = 1
};
static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
- .clock_enable = CKEN_SSP4,
.num_chipselect = 2,
.enable_dma = 1
};
#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
#define GPIO102_MAGICIAN_KEY_PHONE 102
#define GPIO103_MAGICIAN_LED_KP 103
-#define GPIO104_MAGICIAN_LCD_POWER_1 104
-#define GPIO105_MAGICIAN_LCD_POWER_2 105
-#define GPIO106_MAGICIAN_LCD_POWER_3 106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
+#define GPIO105_MAGICIAN_LCD_VON_EN 105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
#define GPIO107_MAGICIAN_DS1WM_IRQ 107
#define GPIO108_MAGICIAN_GSM_READY 108
#define GPIO114_MAGICIAN_UNKNOWN 114
* CPLD EGPIOs
*/
-#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
/* output */
-#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
+#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
-#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1)
-#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
+#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
-#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3)
#endif /* _MAGICIAN_H_ */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern int pxa27x_set_pwrmode(unsigned int mode);
extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#endif /* __MACH_PXA27x_H */
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
},
};
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data lpd270_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1,
.dft_brightness = 1,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
#include <linux/mfd/htc-pasic3.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
#include "devices.h"
#include "generic.h"
GPIO20_nSDCS_2,
GPIO21_nSDCS_3,
GPIO15_nCS_1,
- GPIO78_nCS_2, /* PASIC3 */
- GPIO79_nCS_3, /* EGPIO CPLD */
+ GPIO78_nCS_2, /* PASIC3 */
+ GPIO79_nCS_3, /* EGPIO CPLD */
GPIO80_nCS_4,
GPIO33_nCS_5,
- /* I2C */
+ /* I2C UDA1380 + OV9640 */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
- /* PWM 0 */
+ /* PWM 0 - LCD backlight */
GPIO16_PWM0_OUT,
- /* I2S */
+ /* I2S UDA1380 capture */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
- /* SSP 1 */
+ /* SSP 1 UDA1380 playback */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
- /* SSP 2 */
+ /* SSP 2 TSC2046 touchscreen */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
- /* MMC */
+ /* MMC/SD/SDHC slot */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
- /* QCI */
+ /* QCI camera interface */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
};
/*
- * IRDA
+ * IrDA
*/
static struct pxaficp_platform_data magician_ficp_info = {
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
+ .gpio_pwdown_inverted = 0,
};
/*
#define INIT_KEY(_code, _gpio, _desc) \
{ \
- .code = KEY_##_code, \
- .gpio = _gpio, \
- .desc = _desc, \
- .type = EV_KEY, \
- .wakeup = 1, \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
}
static struct gpio_keys_button magician_button_table[] = {
};
static struct gpio_keys_platform_data gpio_keys_data = {
- .buttons = magician_button_table,
- .nbuttons = ARRAY_SIZE(magician_button_table),
+ .buttons = magician_button_table,
+ .nbuttons = ARRAY_SIZE(magician_button_table),
};
static struct platform_device gpio_keys = {
- .name = "gpio-keys",
- .dev = {
+ .name = "gpio-keys",
+ .dev = {
.platform_data = &gpio_keys_data,
},
- .id = -1,
+ .id = -1,
};
-
/*
* EGPIO (Xilinx CPLD)
*
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
*/
static struct resource egpio_resources[] = {
[0] = {
- .start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20 - 1,
- .flags = IORESOURCE_MEM,
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
},
[1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
- .flags = IORESOURCE_IRQ,
+ .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .flags = IORESOURCE_IRQ,
},
};
static struct htc_egpio_chip egpio_chips[] = {
[0] = {
- .reg_start = 0,
- .gpio_base = MAGICIAN_EGPIO(0, 0),
- .num_gpios = 24,
- .direction = HTC_EGPIO_OUTPUT,
- .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+ .reg_start = 0,
+ .gpio_base = MAGICIAN_EGPIO(0, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_OUTPUT,
+ /*
+ * Depends on modules configuration
+ */
+ .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
},
[1] = {
- .reg_start = 4,
- .gpio_base = MAGICIAN_EGPIO(4, 0),
- .num_gpios = 24,
- .direction = HTC_EGPIO_INPUT,
+ .reg_start = 4,
+ .gpio_base = MAGICIAN_EGPIO(4, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_INPUT,
},
};
static struct htc_egpio_platform_data egpio_info = {
- .reg_width = 8,
- .bus_width = 32,
- .irq_base = IRQ_BOARD_START,
- .num_irqs = 4,
- .ack_register = 3,
- .chip = egpio_chips,
- .num_chips = ARRAY_SIZE(egpio_chips),
+ .reg_width = 8,
+ .bus_width = 32,
+ .irq_base = IRQ_BOARD_START,
+ .num_irqs = 4,
+ .ack_register = 3,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
};
static struct platform_device egpio = {
- .name = "htc-egpio",
- .id = -1,
- .resource = egpio_resources,
- .num_resources = ARRAY_SIZE(egpio_resources),
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
.dev = {
.platform_data = &egpio_info,
},
};
/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
*/
static struct pxafb_mode_info toppoly_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 11,
- .vsync_len = 3,
- .left_margin = 19,
- .upper_margin = 2,
- .right_margin = 10,
- .lower_margin = 2,
- .sync = 0,
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
+ .upper_margin = 2,
+ .right_margin = 10,
+ .lower_margin = 2,
+ .sync = 0,
},
};
static struct pxafb_mode_info samsung_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 8,
- .vsync_len = 4,
- .left_margin = 9,
- .upper_margin = 4,
- .right_margin = 9,
- .lower_margin = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .pixclock = 226469,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 4,
+ .left_margin = 9,
+ .upper_margin = 4,
+ .right_margin = 9,
+ .lower_margin = 4,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Toppoly LCD power\n");
+ pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
udelay(2000);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
udelay(2000);
/* FIXME: enable LCDC here */
udelay(2000);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
udelay(2000);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
msleep(15);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
udelay(500);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
udelay(1000);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Samsung LCD power\n");
+ pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
- mdelay(10);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
- mdelay(30);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
- mdelay(10);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ mdelay(6); /* Avdd -> Voff >5ms */
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ mdelay(16); /* Voff -> Von >(5+10)ms */
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
- mdelay(10);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
- mdelay(30);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- mdelay(10);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ mdelay(16);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ mdelay(6);
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
else
}
static struct pxafb_mach_info toppoly_info = {
- .modes = toppoly_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP,
- .pxafb_lcd_power = toppoly_lcd_power,
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .pxafb_lcd_power = toppoly_lcd_power,
};
static struct pxafb_mach_info samsung_info = {
- .modes = samsung_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
- LCD_ALTERNATE_MAPPING,
- .pxafb_lcd_power = samsung_lcd_power,
+ .modes = samsung_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+ .pxafb_lcd_power = samsung_lcd_power,
};
/*
* Backlight
*/
+static struct pwm_lookup magician_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+ PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+ REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
static struct gpio magician_bl_gpios[] = {
- { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
- { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+ { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
+ { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
};
static int magician_backlight_init(struct device *dev)
static int magician_backlight_notify(struct device *dev, int brightness)
{
+ pr_debug("Brightness = %i\n", brightness);
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 0,
- .max_brightness = 272,
- .dft_brightness = 100,
- .pwm_period_ns = 30923,
- .enable_gpio = -1,
- .init = magician_backlight_init,
- .notify = magician_backlight_notify,
- .exit = magician_backlight_exit,
+ .max_brightness = 272,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ .init = magician_backlight_init,
+ .notify = magician_backlight_notify,
+ .exit = magician_backlight_exit,
};
static struct platform_device backlight = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &backlight_data,
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &backlight_data,
},
};
/*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
*/
static struct gpio_led gpio_leds[] = {
};
static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
.platform_data = &gpio_led_info,
},
};
-static struct pasic3_led pasic3_leds[] = {
- {
- .led = {
- .name = "magician:red",
- .default_trigger = "ds2760-battery.0-charging",
- },
- .hw_num = 0,
- .bit2 = PASIC3_BIT2_LED0,
- .mask = PASIC3_MASK_LED0,
- },
- {
- .led = {
- .name = "magician:green",
- .default_trigger = "ds2760-battery.0-charging-or-full",
- },
- .hw_num = 1,
- .bit2 = PASIC3_BIT2_LED1,
- .mask = PASIC3_MASK_LED1,
- },
- {
- .led = {
- .name = "magician:blue",
- .default_trigger = "bluetooth",
- },
- .hw_num = 2,
- .bit2 = PASIC3_BIT2_LED2,
- .mask = PASIC3_MASK_LED2,
- },
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
- .num_leds = ARRAY_SIZE(pasic3_leds),
- .power_gpio = EGPIO_MAGICIAN_LED_POWER,
- .leds = pasic3_leds,
-};
-
/*
* PASIC3 with DS1WM
*/
static struct resource pasic3_resources[] = {
[0] = {
- .start = PXA_CS2_PHYS,
+ .start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x1b,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM,
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct pasic3_platform_data pasic3_platform_data = {
- .led_pdata = &pasic3_leds_info,
.clock_rate = 4000000,
};
};
/*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
*/
static struct resource gpio_vbus_resource = {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
};
static struct gpio_vbus_mach_info gpio_vbus_info = {
- .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
- .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS,
};
static struct platform_device gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .num_resources = 1,
- .resource = &gpio_vbus_resource,
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
.dev = {
.platform_data = &gpio_vbus_info,
},
* External power
*/
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+ int ret = -1;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+ if (ret) {
+ pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+ goto err_ac;
+ }
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+ if (ret) {
+ pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+ goto err_usb;
+ }
+
+ return 0;
+
+err_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+ return ret;
+}
+
+static void magician_set_charge(int flags)
{
- return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ if (flags & PDA_POWER_CHARGE_AC) {
+ pr_debug("Charging from AC\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else if (flags & PDA_POWER_CHARGE_USB) {
+ pr_debug("Charging from USB\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else {
+ pr_debug("Charging disabled\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+ }
}
static int magician_is_ac_online(void)
{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
}
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
{
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+ gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
}
static char *magician_supplicants[] = {
};
static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = magician_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = magician_supplicants,
- .num_supplicants = ARRAY_SIZE(magician_supplicants),
+ .init = magician_supply_init,
+ .exit = magician_supply_exit,
+ .is_ac_online = magician_is_ac_online,
+ .is_usb_online = magician_is_usb_online,
+ .set_charge = magician_set_charge,
+ .supplied_to = magician_supplicants,
+ .num_supplicants = ARRAY_SIZE(magician_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = {
- .name = "ac",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
- .name = "usb",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .name = "usb",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
.platform_data = &power_supply_info,
},
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
};
/*
static struct regulator_init_data bq24022_init_data = {
.constraints = {
- .max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
- .consumer_supplies = bq24022_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
};
static struct gpio_regulator_config bq24022_info = {
- .supply_name = "bq24022",
+ .supply_name = "bq24022",
- .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
- .enable_high = 0,
- .enabled_at_boot = 0,
+ .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
- .states = bq24022_states,
- .nr_states = ARRAY_SIZE(bq24022_states),
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
- .type = REGULATOR_CURRENT,
- .init_data = &bq24022_init_data,
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
- .name = "gpio-regulator",
- .id = -1,
- .dev = {
+ .name = "gpio-regulator",
+ .id = -1,
+ .dev = {
.platform_data = &bq24022_info,
},
};
+/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1475000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
/*
* MMC/SD
*/
static int magician_mci_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
+ irq_handler_t detect_irq, void *data)
{
return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
- "mmc card detect", data);
+ "mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data magician_mci_info = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = magician_mci_init,
- .exit = magician_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
static struct pxaohci_platform_data magician_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ /* port1: CSR Bluetooth, port2: OTG with UDC */
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.power_budget = 0,
+ .power_on_delay = 100,
};
-
/*
* StrataFlash
*/
+static int magician_flash_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+ if (ret) {
+ pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+ if (ret) {
+ pr_err("Cannot set direction for flash enable (%i)\n", ret);
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+ }
+
+ return ret;
+}
+
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
+static void magician_flash_exit(struct platform_device *pdev)
+{
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
static struct resource strataflash_resource = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
};
+static struct mtd_partition magician_flash_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * physmap-flash driver
+ */
+
static struct physmap_flash_data strataflash_data = {
- .width = 4,
- .set_vpp = magician_set_vpp,
+ .width = 4,
+ .init = magician_flash_init,
+ .set_vpp = magician_set_vpp,
+ .exit = magician_flash_exit,
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
};
static struct platform_device strataflash = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &strataflash_resource,
- .num_resources = 1,
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
},
};
/*
- * I2C
+ * PXA I2C main controller
*/
static struct i2c_pxa_platform_data i2c_info = {
- .fast_mode = 1,
+ /* OV9640 I2C device doesn't support fast mode */
+ .fast_mode = 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+ .fast_mode = 1,
};
/*
};
static struct gpio magician_global_gpios[] = {
- { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
+ { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
- { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
- { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
- { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
- { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+ /* NOTICE valid LCD init sequence */
+ { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+ { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+ { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
};
static void __init magician_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
if (err)
- pr_err("magician: Failed to request GPIOs: %d\n", err);
+ pr_err("magician: Failed to request global GPIOs: %d\n", err);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- platform_add_devices(ARRAY_AND_SIZE(devices));
+ pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
pxa_set_ficp_info(&magician_ficp_info);
- pxa27x_set_i2c_power_info(NULL);
+ pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
if (cpld) {
- u8 board_id = __raw_readb(cpld+0x14);
+ u8 board_id = __raw_readb(cpld + 0x14);
+
iounmap(cpld);
system_rev = board_id & 0x7;
lcd_select = board_id & 0x8;
pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
if (lcd_select && (system_rev < 3))
+ /* NOTICE valid LCD init sequence */
gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
- GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
- pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
+ GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+ pxa_set_fb_info(NULL,
+ lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
-}
+ regulator_register_always_on(0, "power", pwm_backlight_supply,
+ ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
MACHINE_START(MAGICIAN, "HTC Magician")
- .atag_offset = 0x100,
- .map_io = pxa27x_map_io,
- .nr_irqs = MAGICIAN_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_machine = magician_init,
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = MAGICIAN_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = magician_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data mainstone_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
static void __init mainstone_backlight_register(void)
{
- int ret = platform_device_register(&mainstone_backlight_device);
- if (ret)
+ int ret;
+
+ pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+ ret = platform_device_register(&mainstone_backlight_device);
+ if (ret) {
printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+ pwm_remove_table(mainstone_pwm_lookup,
+ ARRAY_SIZE(mainstone_pwm_lookup));
+ }
}
#else
#define mainstone_backlight_register() do { } while (0)
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/rtc.h>
#include <linux/leds.h>
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
/* LCD Screen and Backlight */
static struct platform_pwm_backlight_data mioa701_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
- .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
.enable_gpio = -1,
};
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL);
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
&mioa701_gpio_keys,
&mioa701_backlight,
&mioa701_led,
+ &wm9713_acodec,
&pxa2xx_pcm,
&mioa701_sound,
&power_dev,
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
+ pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
static int palm_bl_power;
static int palm_lcd_power;
}
static struct platform_pwm_backlight_data palm27x_backlight_data = {
- .pwm_id = 0,
.max_brightness = 0xfe,
.dft_brightness = 0x7e,
- .pwm_period_ns = 3500 * 1024,
.enable_gpio = -1,
.init = palm27x_backlight_init,
.notify = palm27x_backlight_notify,
{
palm_bl_power = bl;
palm_lcd_power = lcd;
+ pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/input.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+ PWM_PERIOD_NORMAL),
+};
+
static struct platform_pwm_backlight_data palmtc_backlight_data = {
- .pwm_id = 1,
.max_brightness = PALMTC_MAX_INTENSITY,
.dft_brightness = PALMTC_MAX_INTENSITY,
- .pwm_period_ns = PALMTC_PERIOD_NS,
.enable_gpio = GPIO_NR_PALMTC_BL_POWER,
};
static void __init palmtc_pwm_init(void)
{
+ pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
platform_device_register(&palmtc_backlight);
}
#else
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
/******************************************************************************
* Backlight
******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+ PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
static struct gpio palmte_bl_gpios[] = {
{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
- .pwm_id = 0,
.max_brightness = PALMTE2_MAX_INTENSITY,
.dft_brightness = PALMTE2_MAX_INTENSITY,
- .pwm_period_ns = PALMTE2_PERIOD_NS,
.enable_gpio = -1,
.init = palmte2_backlight_init,
.notify = palmte2_backlight_notify,
pxa_set_ac97_info(&palmte2_ac97_pdata);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
+ pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <media/mt9v022.h>
};
#endif
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data pcm990_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
#ifndef CONFIG_PCM990_DISPLAY_NONE
pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
+ pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
platform_device_register(&pcm990_backlight_device);
/* MMC */
*/
static unsigned int pwrmode = PWRMODE_SLEEP;
-int __init pxa27x_set_pwrmode(unsigned int mode)
+int pxa27x_set_pwrmode(unsigned int mode)
{
switch (mode) {
case PWRMODE_SLEEP:
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-#ifdef CONFIG_PM
-
-#define ISRAM_START 0x5c000000
-#define ISRAM_SIZE SZ_256K
/*
* NAND NFC: DFI bus arbitration subset
#define NDCR_ND_ARB_EN (1 << 12)
#define NDCR_ND_ARB_CNTL (1 << 19)
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
static void __iomem *sram;
static unsigned long wakeup_src;
#include <linux/leds.h>
#include <linux/w1-gpio.h>
#include <linux/sched.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
.ext_pullup_enable_pin = -EINVAL,
};
-struct platform_device raumfeld_w1_gpio_device = {
+static struct platform_device raumfeld_w1_gpio_device = {
.name = "w1-gpio",
.dev = {
.platform_data = &w1_gpio_platform_data
* Framebuffer device
*/
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
/* PWM controlled backlight */
static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- /* 10000 ns = 10 ms ^= 100 kHz */
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
} else {
mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ pwm_add_table(raumfeld_pwm_lookup,
+ ARRAY_SIZE(raumfeld_pwm_lookup));
platform_device_register(&raumfeld_pwm_backlight_device);
}
* SPI devices
*/
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
.sck = GPIO_SPI_CLK,
.mosi = GPIO_SPI_MOSI,
.miso = GPIO_SPI_MISO,
static struct regulator_consumer_supply audio_va_consumer_supply =
REGULATOR_SUPPLY("va", "0-0048");
-struct regulator_init_data audio_va_initdata = {
+static struct regulator_init_data audio_va_initdata = {
.consumer_supplies = &audio_va_consumer_supply,
.num_consumer_supplies = 1,
.constraints = {
REGULATOR_SUPPLY("vlc", "0-0048"),
};
-struct regulator_init_data audio_dummy_initdata = {
+static struct regulator_init_data audio_dummy_initdata = {
.consumer_supplies = audio_dummy_supplies,
.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
.constraints = {
.num_consumer_supplies = 1,
};
-struct max8660_subdev_data max8660_v6_subdev_data = {
+static struct max8660_subdev_data max8660_v6_subdev_data = {
.id = MAX8660_V6,
.name = "vmmc",
.platform_data = &vcc_mmc_init_data,
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/smc91x.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
[0] = {
/* primary backlight */
- .pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 100000,
.enable_gpio = -1,
},
[1] = {
/* secondary backlight */
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 100000,
.enable_gpio = -1,
},
};
static void __init tavorevb_init_lcd(void)
{
+ pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
pxa_set_fb_info(NULL, &tavorevb_lcd_info);
#include <linux/i2c/pxa-i2c.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/usb/isp116x.h>
#include <linux/mtd/mtd.h>
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+static struct pwm_lookup viper_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
static int viper_backlight_init(struct device *dev)
{
int ret;
}
static struct platform_pwm_backlight_data viper_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 1000000,
.enable_gpio = -1,
.init = viper_backlight_init,
.notify = viper_backlight_notify,
smc91x_device.num_resources--;
pxa_set_i2c_info(NULL);
+ pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
viper_init_vcore_gpios();
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data z2_backlight_data[] = {
[0] = {
/* Keypad Backlight */
- .pwm_id = 1,
.max_brightness = 1023,
.dft_brightness = 0,
- .pwm_period_ns = 1260320,
.enable_gpio = -1,
},
[1] = {
/* LCD Backlight */
- .pwm_id = 2,
.max_brightness = 1023,
.dft_brightness = 512,
- .pwm_period_ns = 1260320,
.enable_gpio = -1,
},
};
};
static void __init z2_pwm_init(void)
{
+ pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
platform_device_register(&z2_backlight_devices[0]);
platform_device_register(&z2_backlight_devices[1]);
}
};
static struct pxa2xx_spi_master pxa_ssp1_master_info = {
- .clock_enable = CKEN_SSP,
.num_chipselect = 1,
.enable_dma = 1,
};
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
- .clock_enable = CKEN_SSP2,
.num_chipselect = 1,
};
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data zylonite_backlight_data = {
- .pwm_id = 3,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
static void __init zylonite_init_lcd(void)
{
+ pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
static DEFINE_SPINLOCK(boot_lock);
#ifdef CONFIG_HOTPLUG_CPU
-static void __ref qcom_cpu_die(unsigned int cpu)
+static void qcom_cpu_die(unsigned int cpu)
{
wfi();
}
*
* Called with IRQs disabled
*/
-void __ref realview_cpu_die(unsigned int cpu)
+void realview_cpu_die(unsigned int cpu)
{
int spurious = 0;
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/leds.h>
.ocr_avail = MMC_VDD_32_33,
};
+static struct pwm_lookup h1940_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+ PWM_POLARITY_NORMAL),
+};
+
static int h1940_backlight_init(struct device *dev)
{
gpio_request(S3C2410_GPB(0), "Backlight");
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
- /* tcnt = 0x31 */
- .pwm_period_ns = 36296,
.enable_gpio = -1,
.init = h1940_backlight_init,
.notify = h1940_backlight_notify,
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
+ pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
gpio_request(S3C2410_GPA(1), "Red LED blink");
};
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct pwm_device *lcd_pwm;
static void rx1950_lcd_power(int enable)
}
static struct platform_pwm_backlight_data rx1950_backlight_data = {
- .pwm_id = 0,
.max_brightness = 24,
.dft_brightness = 4,
- .pwm_period_ns = 48000,
.enable_gpio = -1,
.init = rx1950_backlight_init,
.notify = rx1950_backlight_notify,
gpio_direction_output(S3C2410_GPA(4), 0);
gpio_direction_output(S3C2410_GPJ(6), 0);
+ pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
.plat_data = {
.max_brightness = 255,
.dft_brightness = 255,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
.init = samsung_bl_init,
.exit = samsung_bl_exit,
samsung_bl_data = &samsung_bl_drvdata->plat_data;
/* Copy board specific data provided by user */
- samsung_bl_data->pwm_id = bl_data->pwm_id;
samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
if (bl_data->max_brightness)
samsung_bl_data->dft_brightness = bl_data->dft_brightness;
if (bl_data->lth_brightness)
samsung_bl_data->lth_brightness = bl_data->lth_brightness;
- if (bl_data->pwm_period_ns)
- samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
if (bl_data->enable_gpio >= 0)
samsung_bl_data->enable_gpio = bl_data->enable_gpio;
if (bl_data->init)
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/dm9000.h>
#include <linux/gpio_keys.h>
},
};
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data crag6410_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1000,
.dft_brightness = 600,
- .pwm_period_ns = 100000, /* about 1kHz */
.enable_gpio = -1,
};
samsung_keypad_set_platdata(&crag6410_keypad_data);
s3c64xx_spi0_set_platdata(NULL, 0, 2);
+ pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
gpio_led_register_device(-1, &gpio_leds_pdata);
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/leds.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
},
};
+static struct pwm_lookup hmt_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
static int hmt_bl_init(struct device *dev)
{
int ret;
}
static struct platform_pwm_backlight_data hmt_backlight_data = {
- .pwm_id = 1,
.max_brightness = 100 * 256,
.dft_brightness = 40 * 256,
- .pwm_period_ns = 1000000000 / (100 * 256 * 20),
.enable_gpio = -1,
.init = hmt_bl_init,
.notify = hmt_bl_notify,
gpio_request(S3C64XX_GPF(13), "usb power");
gpio_direction_output(S3C64XX_GPF(13), 1);
+ pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
}
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
.dev.platform_data = &smartq_usb_otg_vbus_pdata,
};
+static struct pwm_lookup smartq_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
static int smartq_bl_init(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
}
static struct platform_pwm_backlight_data smartq_backlight_data = {
- .pwm_id = 1,
.max_brightness = 1000,
.dft_brightness = 600,
- .pwm_period_ns = 1000000000 / (1000 * 20),
.enable_gpio = -1,
.init = smartq_bl_init,
};
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_wifi_init());
+ pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
}
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
.func = S3C_GPIO_SFN(2),
};
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data smdk6410_bl_data = {
- .pwm_id = 1,
.enable_gpio = -1,
};
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+ pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
}
comment "Renesas ARM SoCs System Configuration"
endif
-
-if ARCH_SHMOBILE_LEGACY
-
-comment "Renesas ARM SoCs System Type"
-
-config ARCH_R8A7778
- bool "R-Car M1A (R8A77781)"
- select ARCH_RCAR_GEN1
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
-
-config ARCH_R8A7779
- bool "R-Car H1 (R8A77790)"
- select ARCH_RCAR_GEN1
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
-
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_BOCKW
- bool "BOCK-W platform"
- depends on ARCH_R8A7778
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SND_SOC_AK4554 if SND_SIMPLE_CARD
- select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
- select USE_OF
-
-config MACH_BOCKW_REFERENCE
- bool "BOCK-W - Reference Device Tree Implementation"
- depends on ARCH_R8A7778
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
- ---help---
- Use reference implementation of BockW board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
- bool
- default y
-
-config SH_CLK_CPG
- bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- default "128"
- help
- Allows the configuration of the timer frequency. It is customary
- to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
- case of low timer frequencies other values may be more suitable.
- Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
- want to select a HZ value such as 128 that can evenly divide RCLK.
- A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
-endif
#
# Common objects
-obj-y := timer.o console.o
+obj-y := timer.o
# CPU objects
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y += clock.o
-obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
-endif
-
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
-# Board objects
-ifndef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
-endif
-
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
+++ /dev/null
-# per-board load address for uImage
-loadaddr-y :=
-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-
-__ZRELADDR := $(sort $(loadaddr-y))
- zreladdr-y += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
+++ /dev/null
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- * see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA 0x18200000
-#define IRQ0MR 0x30
-#define COMCTLR 0x101c
-
-#define PFC 0xfffc0000
-#define PUPR4 0x110
-static void __init bockw_init(void)
-{
- void __iomem *fpga;
- void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
- r8a7778_clock_init();
-#endif
- r8a7778_init_irq_extpin_dt(1);
- r8a7778_add_dt_devices();
-
- fpga = ioremap_nocache(FPGA, SZ_1M);
- if (fpga) {
- /*
- * CAUTION
- *
- * IRQ0/1 is cascaded interrupt from FPGA.
- * it should be cared in the future
- * Now, it is assuming IRQ0 was used only from SMSC.
- */
- u16 val = ioread16(fpga + IRQ0MR);
- val &= ~(1 << 4); /* enable SMSC911x */
- iowrite16(val, fpga + IRQ0MR);
-
- iounmap(fpga);
- }
-
- pfc = ioremap_nocache(PFC, 0x200);
- if (pfc) {
- /*
- * FIXME
- *
- * SDHI CD/WP pin needs pull-up
- */
- iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
- iounmap(pfc);
- }
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
- "renesas,bockw-reference",
- NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = shmobile_init_delay,
- .init_irq = r8a7778_init_irq_dt,
- .init_machine = bockw_init,
- .init_late = shmobile_init_late,
- .dt_compat = bockw_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA 0x18200000
-#define IRQ0MR 0x30
-#define COMCTLR 0x101c
-static void __iomem *fpga;
-
-/*
- * CN9(Upper side) SCIF/RCAN selection
- *
- * 1,4 3,6
- * SW40 SCIF RCAN
- * SW41 SCIF RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6 (D2) 3 pin
- * SW7 (D5) ON
- * SW8 (D3) 3 pin
- * SW10 (D4) 1 pin
- * SW12 (CLK) 1 pin
- * SW13 (D6) 3 pin
- * SW14 (CMD) ON
- * SW15 (D6) 1 pin
- * SW16 (D0) ON
- * SW17 (D1) ON
- * SW18 (D7) 3 pin
- * SW19 (MMC) 1 pin
- */
-
-/*
- * SSI settings
- *
- * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101 (SSI6 Recorde)
- * SW47: 1110 (SSI5 Playback)
- * SW48: 11 (Recorde power)
- * SW49: 1 (SSI slave mode)
- * SW50: 1111 (SSI7, SSI8)
- * SW51: 1111 (SSI3, SSI4)
- * SW54: 1pin (ak4554 FPGA control)
- * SW55: 1 (CLKB is 24.5760MHz)
- * SW60: 1pin (ak4554 FPGA control)
- * SW61: 3pin (use X11 clock)
- * SW78: 3-6 (ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- * Host Func
- * SW98 1 2
- * SW99 1 3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
- DEFINE_RES_MEM(0x18300000, 0x1000),
- DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-#define SUSPMODE 0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
- void __iomem *base, int enable)
-{
- enable = !!enable;
-
- r8a7778_usb_phy_power(enable);
-
- iowrite16(enable << 14, base + SUSPMODE);
-
- return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe60000, 0x110),
- DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
- .platform_callback = {
- .get_id = usbhsf_get_id,
- .power_ctrl = usbhsf_power_ctrl,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX,
- .d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX,
- },
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE "renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \
- platform_device_register_resndata( \
- NULL, "renesas_usbhs", -1, \
- usbhsf_resources, \
- ARRAY_SIZE(usbhsf_resources), \
- &usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE "ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70800, 0x100),
- DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
- USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
- .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SD_HIGHSPEED,
- .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
- .flags = TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
- DEFINE_RES_MEM(0xFFE4C000, 0x100),
- DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- DEFINE_RES_MEM(0xfde00000, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
- .phy = 0x01,
- .edmac_endian = EDMAC_LITTLE_ENDIAN,
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- /*
- * Although the LINK signal is available on the board, it's connected to
- * the link/activity LED output of the PHY, thus the link disappears and
- * reappears after each packet. We'd be better off ignoring such signal
- * and getting the link state from the PHY indirectly.
- */
- .no_ether_link = 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
- .name = "r8a777x-ether",
- .id = -1,
- .res = ether_resources,
- .num_res = ARRAY_SIZE(ether_resources),
- .data = ðer_platform_data,
- .size_data = sizeof(ether_platform_data),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("rx8581", 0x51),
- }, {
- I2C_BOARD_INFO("ak4643", 0x12),
- }
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
- {
- .name = "data(spi)",
- .size = 0x0100000,
- .offset = 0,
- },
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .type = "s25fl008k",
- .parts = m25p80_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 104000000,
- .chip_select = 0,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .platform_data = &spi_flash_data,
- },
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe4e000, 0x100),
- DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
- .sup_pclk = 0,
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx) \
-static struct i2c_board_info camera##idx##_info = { \
- I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \
-}; \
- \
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \
- .bus_id = idx, \
- .i2c_adapter_id = 0, \
- .board_info = &camera##idx##_info, \
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
- .flags = RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx) \
-static struct resource vin##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
- DEFINE_RES_IRQ(gic_iid(0x5a)), \
-}; \
- \
-static struct platform_device_info vin##idx##_info __initdata = { \
- .name = "r8a7778-vin", \
- .id = idx, \
- .res = vin##idx##_resources, \
- .num_res = ARRAY_SIZE(vin##idx##_resources), \
- .dma_mask = DMA_BIT_MASK(32), \
- .data = &vin_platform_data, \
- .size_data = sizeof(vin_platform_data), \
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
- [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
- [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
- [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
- RSND_SSI_UNUSED, /* SSI 0 */
- RSND_SSI_UNUSED, /* SSI 1 */
- RSND_SSI_UNUSED, /* SSI 2 */
- RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
- RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
- RSND_SRC_UNUSED, /* SRU 0 */
- RSND_SRC_UNUSED, /* SRU 1 */
- RSND_SRC_UNUSED, /* SRU 2 */
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
- {
- .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
- .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
- }, {
- .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
- }, {
- .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
- }, {
- .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
- }, {
- .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
- },
-};
-
-enum {
- AK4554_34 = 0,
- AK4643_56,
- AK4554_78,
- SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
- static int sound_user[SOUND_MAX] = {0, 0, 0};
- int *usr = NULL;
- u32 bit;
-
- switch (id) {
- case 3:
- case 4:
- usr = sound_user + AK4554_34;
- bit = (1 << 10);
- break;
- case 5:
- case 6:
- usr = sound_user + AK4643_56;
- bit = (1 << 6);
- break;
- case 7:
- case 8:
- usr = sound_user + AK4554_78;
- bit = (1 << 7);
- break;
- }
-
- if (!usr)
- return -EIO;
-
- if (enable) {
- if (*usr == 0) {
- u32 val = ioread16(fpga + COMCTLR);
- val &= ~bit;
- iowrite16(val, fpga + COMCTLR);
- }
-
- (*usr)++;
- } else {
- if (*usr == 0)
- return 0;
-
- (*usr)--;
-
- if (*usr == 0) {
- u32 val = ioread16(fpga + COMCTLR);
- val |= bit;
- iowrite16(val, fpga + COMCTLR);
- }
- }
-
- return 0;
-}
-
-static int rsnd_start(int id)
-{
- return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
- return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
- .flags = RSND_GEN1,
- .ssi_info = rsnd_ssi,
- .ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
- .src_info = rsnd_src,
- .src_info_nr = ARRAY_SIZE(rsnd_src),
- .dai_info = rsnd_dai,
- .dai_info_nr = ARRAY_SIZE(rsnd_dai),
- .start = rsnd_start,
- .stop = rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
- /* SSI5, SSI6 */
- {
- .name = "AK4643",
- .card = "SSI56-AK4643",
- .codec = "ak4642-codec.0-0012",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
- .cpu_dai = {
- .name = "rsnd-dai.0",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
- },
- /* SSI3 */
- {
- .name = "AK4554",
- .card = "SSI3-AK4554(playback)",
- .codec = "ak4554-adc-dac.0",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
- .cpu_dai = {
- .name = "rsnd-dai.1",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI4 */
- {
- .name = "AK4554",
- .card = "SSI4-AK4554(capture)",
- .codec = "ak4554-adc-dac.0",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
- .cpu_dai = {
- .name = "rsnd-dai.2",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI7 */
- {
- .name = "AK4554",
- .card = "SSI7-AK4554(playback)",
- .codec = "ak4554-adc-dac.1",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
- .cpu_dai = {
- .name = "rsnd-dai.3",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI8 */
- {
- .name = "AK4554",
- .card = "SSI8-AK4554(capture)",
- .codec = "ak4554-adc-dac.1",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
- .cpu_dai = {
- .name = "rsnd-dai.4",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- }
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
- /* AUDIO */
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "audio_clk_a", "audio_clk"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "audio_clk_b", "audio_clk"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi34_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi3_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi4_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi5_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi5_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi6_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi6_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi78_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi7_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi8_data", "ssi"),
- /* Ether */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
- "ether_rmii", "ether"),
- /* HSPI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
- "hspi0_a", "hspi0"),
- /* MMC */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
- "mmc_data8", "mmc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
- "mmc_ctrl", "mmc"),
- /* SCIF0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_data_a", "scif0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_ctrl", "scif0"),
- /* USB */
- PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
- "usb0", "usb0"),
- PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
- "usb1", "usb1"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_wp", "sdhi0"),
- /* VIN0 */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
- "vin0_clk", "vin0"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
- "vin0_data8", "vin0"),
- /* VIN1 */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
- "vin1_clk", "vin1"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
- "vin1_data8", "vin1"),
-};
-
-#define PFC 0xfffc0000
-#define PUPR4 0x110
-static void __init bockw_init(void)
-{
- void __iomem *base;
- struct clk *clk;
- struct platform_device *pdev;
- int i;
-
- r8a7778_clock_init();
- r8a7778_init_irq_extpin(1);
- r8a7778_add_standard_devices();
-
- platform_device_register_full(ðer_info);
-
- platform_device_register_full(&vin0_info);
- /* VIN1 has a pin conflict with Ether */
- if (!IS_ENABLED(CONFIG_SH_ETH))
- platform_device_register_full(&vin1_info);
- platform_device_register_data(NULL, "soc-camera-pdrv", 0,
- &iclink0_ml86v7667,
- sizeof(iclink0_ml86v7667));
- platform_device_register_data(NULL, "soc-camera-pdrv", 1,
- &iclink1_ml86v7667,
- sizeof(iclink1_ml86v7667));
-
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- spi_register_board_info(spi_board_info,
- ARRAY_SIZE(spi_board_info));
- pinctrl_register_mappings(bockw_pinctrl_map,
- ARRAY_SIZE(bockw_pinctrl_map));
- r8a7778_pinmux_init();
-
- platform_device_register_resndata(
- NULL, "sh_mmcif", -1,
- mmc_resources, ARRAY_SIZE(mmc_resources),
- &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
- platform_device_register_resndata(
- NULL, "rcar_usb_phy", -1,
- usb_phy_resources,
- ARRAY_SIZE(usb_phy_resources),
- &usb_phy_platform_data,
- sizeof(struct rcar_phy_platform_data));
-
- regulator_register_fixed(0, dummy_supplies,
- ARRAY_SIZE(dummy_supplies));
- regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* for SMSC */
- fpga = ioremap_nocache(FPGA, SZ_1M);
- if (fpga) {
- /*
- * CAUTION
- *
- * IRQ0/1 is cascaded interrupt from FPGA.
- * it should be cared in the future
- * Now, it is assuming IRQ0 was used only from SMSC.
- */
- u16 val = ioread16(fpga + IRQ0MR);
- val &= ~(1 << 4); /* enable SMSC911x */
- iowrite16(val, fpga + IRQ0MR);
-
- platform_device_register_resndata(
- NULL, "smsc911x", -1,
- smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
- &smsc911x_data, sizeof(smsc911x_data));
- }
-
- /* for SDHI */
- base = ioremap_nocache(PFC, 0x200);
- if (base) {
- /*
- * FIXME
- *
- * SDHI CD/WP pin needs pull-up
- */
- iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
- iounmap(base);
-
- platform_device_register_resndata(
- NULL, "sh_mobile_sdhi", 0,
- sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
- &sdhi0_info, sizeof(struct tmio_mmc_data));
- }
-
- /* for Audio */
- rsnd_codec_power(5, 1); /* enable ak4642 */
-
- platform_device_register_simple(
- "ak4554-adc-dac", 0, NULL, 0);
-
- platform_device_register_simple(
- "ak4554-adc-dac", 1, NULL, 0);
-
- pdev = platform_device_register_resndata(
- NULL, "rcar_sound", -1,
- rsnd_resources, ARRAY_SIZE(rsnd_resources),
- &rsnd_info, sizeof(rsnd_info));
-
- clk = clk_get(&pdev->dev, "clk_b");
- clk_set_rate(clk, 24576000);
- clk_put(clk);
-
- for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
- struct platform_device_info cardinfo = {
- .name = "asoc-simple-card",
- .id = i,
- .data = &rsnd_card_info[i],
- .size_data = sizeof(struct asoc_simple_card_info),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&cardinfo);
- }
-}
-
-static void __init bockw_init_late(void)
-{
- r8a7778_init_late();
- ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
- "renesas,bockw",
- NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = shmobile_init_delay,
- .init_irq = r8a7778_init_irq_dt,
- .init_machine = bockw_init,
- .dt_compat = bockw_boards_compat_dt,
- .init_late = bockw_init_late,
-MACHINE_END
+++ /dev/null
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * MD MD MD MD PLLA PLLB EXTAL clki clkz
- * 19 18 12 11 (HMz) (MHz) (MHz)
- *----------------------------------------------------------------------------
- * 1 0 0 0 x21 x21 38.00 800 800
- * 1 0 0 1 x24 x24 33.33 800 800
- * 1 0 1 0 x28 x28 28.50 800 800
- * 1 0 1 1 x32 x32 25.00 800 800
- * 1 1 0 1 x24 x21 33.33 800 700
- * 1 1 1 0 x28 x21 28.50 800 600
- * 1 1 1 1 x32 x24 25.00 800 600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0 IOMEM(0xffc80030)
-#define MSTPCR1 IOMEM(0xffc80034)
-#define MSTPCR3 IOMEM(0xffc8003c)
-#define MSTPSR1 IOMEM(0xffc80044)
-#define MSTPSR4 IOMEM(0xffc80048)
-#define MSTPSR6 IOMEM(0xffc8004c)
-#define MSTPCR4 IOMEM(0xffc80050)
-#define MSTPCR5 IOMEM(0xffc80054)
-#define MSTPCR6 IOMEM(0xffc80058)
-#define MODEMR 0xFFCC0020
-
-#define MD(nr) BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
- .phys = 0xffc80000,
- .len = 0x80,
-};
-
-static struct clk extal_clk = {
- /* .rate will be updated on r8a7778_clock_init() */
- .mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1);
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &plla_clk,
- &pllb_clk,
- &i_clk,
- &s_clk,
- &s1_clk,
- &s3_clk,
- &s4_clk,
- &b_clk,
- &out_clk,
- &p_clk,
- &g_clk,
- &z_clk,
- &audio_clk_a,
- &audio_clk_b,
- &audio_clk_c,
-};
-
-enum {
- MSTP531, MSTP530,
- MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
- MSTP331,
- MSTP323, MSTP322, MSTP321,
- MSTP311, MSTP310,
- MSTP309, MSTP308, MSTP307,
- MSTP114,
- MSTP110, MSTP109,
- MSTP100,
- MSTP030,
- MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
- MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
- MSTP009, MSTP008, MSTP007,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
- [MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
- [MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
- [MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
- [MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
- [MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
- [MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
- [MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
- [MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
- [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
- [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
- [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
- [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
- [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
- [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
- [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */
- [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */
- [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */
- [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
- [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
- [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */
- [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */
- [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
- [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
- [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
- [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
- [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
- [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
- [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
- [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
- [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
- [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
- [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
- [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
- [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
- [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
- [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
- [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */
- [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */
- [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
- /* main */
- CLKDEV_CON_ID("shyway_clk", &s_clk),
- CLKDEV_CON_ID("peripheral_clk", &p_clk),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
- CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
- CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
- CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
- CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
- CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
- CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
- CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
- CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
- CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
- CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
- CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
- CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
- CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
- CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
- CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
- CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
- CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
- CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
- CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
- CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
- CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
- CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
- CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
- CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
- CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
- CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
- CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
- CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
- CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
- CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
- CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
- CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
- CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
- CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
- CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
- CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
- CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
- CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
- CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
- CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
- CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
- CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
- CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
- CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
- CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
- CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
- CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
- CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
- CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
- CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
- CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
- CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
- CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
- int k, ret = 0;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
- case MD(19):
- extal_clk.rate = 38000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(11):
- extal_clk.rate = 33333333;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
- break;
- case MD(19) | MD(12):
- extal_clk.rate = 28500000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1);
- break;
- case MD(19) | MD(12) | MD(11):
- extal_clk.rate = 25000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1);
- break;
- case MD(19) | MD(18) | MD(11):
- extal_clk.rate = 33333333;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(18) | MD(12):
- extal_clk.rate = 28500000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(18) | MD(12) | MD(11):
- extal_clk.rate = 25000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
- break;
- default:
- BUG();
- }
-
- if (mode & MD(1)) {
- SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
- SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3);
- SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6);
- SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
- if (mode & MD(2)) {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18);
- } else {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
- }
- } else {
- SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
- SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16);
- SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
- if (mode & MD(2)) {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16);
- } else {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
- }
- }
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup r8a7778 clocks\n");
-}
+++ /dev/null
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
- struct clk_ratio *p = clk->priv;
-
- return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
- .recalc = shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
- /* Kick the child clocks.. */
- recalculate_root_clocks();
-
- /* Enable the necessary init clocks */
- clk_enable_init_clocks();
-
- return 0;
-}
+++ /dev/null
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
- int mul;
- int div;
-};
-
-#define SH_CLK_RATIO(name, m, d) \
-static struct clk_ratio name ##_ratio = { \
- .mul = m, \
- .div = d, \
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r) \
-struct clk name = { \
- .parent = &p, \
- .ops = &shmobile_fixed_ratio_clk_ops,\
- .priv = &r ## _ratio, \
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r) \
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \
- SH_CLK_RATIO(name, m, d); \
- SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d) \
-do { \
- (p)->mul = m; \
- (p)->div = d; \
-} while (0)
-
-#endif
#ifndef __ARCH_MACH_COMMON_H
#define __ARCH_MACH_COMMON_H
-extern void shmobile_earlytimer_init(void);
extern void shmobile_init_delay(void);
-struct twd_local_timer;
-extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
extern struct platform_suspend_ops shmobile_suspend_ops;
#ifdef CONFIG_SUSPEND
+++ /dev/null
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-void __init shmobile_setup_console(void)
-{
- parse_early_param();
-
- /* Let earlyprintk output early console messages */
- early_platform_driver_probe("earlyprintk", 1, 1);
-}
+++ /dev/null
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p) \
- p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \
- p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p) \
- p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \
- p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect) \
- vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \
- vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \
- vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \
- vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \
- vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \
- vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \
- vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \
- vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect) \
- vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \
- vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \
- vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \
- vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \
- vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \
- vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \
- vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \
- vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base) \
- { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base) \
- { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base) \
- { base + 0x10, 0, 32, 4, /* INTPRI00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x14, 0, 32, 4, /* INTPRI10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base) \
- { base + 0x18, 0, 32, 4, /* INTPRI20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base) \
- { base + 0x00, 32, 4, /* ICR1A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x04, 32, 4, /* ICR2A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base) \
- { base + 0x08, 32, 4, /* ICR3A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x0c, 32, 4, /* ICR4A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base) \
- { base + 0x20, 0, 8, /* INTREQ00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x24, 0, 8, /* INTREQ10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base) \
- { base + 0x28, 0, 8, /* INTREQ20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x2c, 0, 8, /* INTREQ30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x64, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16L(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16L(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16L(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16L(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16L(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16L(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x64, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16H(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16H(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16H(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16H(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16H(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16H(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x6c, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16L(p), \
- INTC_IRQ_PINS_ENUM_16H(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16L(p, vect), \
- INTC_IRQ_PINS_VECT_16H(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16L(p, base), \
- INTC_IRQ_PINS_MASK_16H(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16L(p, base), \
- INTC_IRQ_PINS_PRIO_16H(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16L(p, base), \
- INTC_IRQ_PINS_SENSE_16H(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16L(p, base), \
- INTC_IRQ_PINS_ACK_16H(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p) \
- PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \
- PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect) \
- vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \
- vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \
- vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \
- vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str, \
- enums_1, enums_2, enums_3, enums_4, \
- vect_1, vect_2, vect_3, vect_4, \
- mask_a, mask_b, mask_c, mask_d, \
- sense_a, sense_b, sense_c, sense_d) \
- \
-enum { \
- PINT ## p ## _UNUSED = 0, \
- enums_1 enums_2 enums_3 enums_4 \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- vect_1 vect_2 vect_3 vect_4 \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- { mask_reg, 0, 32, /* PINTER */ \
- { mask_a mask_b mask_c mask_d } } \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- { sense_base + 0x00, 16, 2, /* PINTCR */ \
- { sense_a } }, \
- { sense_base + 0x04, 16, 2, /* PINTCR */ \
- { sense_b } }, \
- { sense_base + 0x08, 16, 2, /* PINTCR */ \
- { sense_c } }, \
- { sense_base + 0x0c, 16, 2, /* PINTCR */ \
- { sense_d } }, \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, NULL, \
- p ## _sense_registers, NULL), \
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif /* __ASM_MACH_INTC_H */
static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
struct rcar_apmu_config *apmu_config, int num)
{
- u32 id;
+ int id;
int k;
int bit, index;
bool is_allowed;
dsb();
}
-void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
+static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
{
/* Select next sleep mode using the APMU */
* for more details.
*/
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/err.h>
-#include <linux/pm_clock.h>
-#include <linux/pm_domain.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-
#include <asm/io.h>
-#include "common.h"
#include "pm-rcar.h"
#include "r8a7779.h"
#define SYSCIER 0x0c
#define SYSCIMR 0x10
-struct r8a7779_pm_domain {
- struct generic_pm_domain genpd;
- struct rcar_sysc_ch ch;
-};
-
-static inline
-const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
- return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
#if defined(CONFIG_PM) || defined(CONFIG_SMP)
static void __init r8a7779_sysc_init(void)
#endif /* CONFIG_PM || CONFIG_SMP */
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
- return rcar_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
- return rcar_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
- return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
- return true;
-}
-
-static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
- struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
- pm_genpd_init(genpd, NULL, false);
- genpd->dev_ops.active_wakeup = pd_active_wakeup;
- genpd->power_off = pd_power_down;
- genpd->power_on = pd_power_up;
-
- if (pd_is_off(&r8a7779_pd->genpd))
- pd_power_up(&r8a7779_pd->genpd);
-}
-
-static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
- {
- .genpd.name = "SH4A",
- .ch = {
- .chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
- .isr_bit = 16, /* SH4A */
- },
- },
- {
- .genpd.name = "SGX",
- .ch = {
- .chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
- .isr_bit = 20, /* SGX */
- },
- },
- {
- .genpd.name = "VDP1",
- .ch = {
- .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
- .isr_bit = 21, /* VDP */
- },
- },
- {
- .genpd.name = "IMPX3",
- .ch = {
- .chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
- .isr_bit = 24, /* IMP */
- },
- },
-};
-
-void __init r8a7779_init_pm_domains(void)
-{
- int j;
-
- for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
- r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
-}
-
-#endif /* CONFIG_PM */
-
void __init r8a7779_pm_init(void)
{
static int once;
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/clk/shmobile.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/of.h>
return true;
}
-static int rmobile_pd_attach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- int error;
-
- error = pm_clk_create(dev);
- if (error) {
- dev_err(dev, "pm_clk_create failed %d\n", error);
- return error;
- }
-
- error = pm_clk_add(dev, NULL);
- if (error) {
- dev_err(dev, "pm_clk_add failed %d\n", error);
- goto fail;
- }
-
- return 0;
-
-fail:
- pm_clk_destroy(dev);
- return error;
-}
-
-static void rmobile_pd_detach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- pm_clk_destroy(dev);
-}
-
static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
{
struct generic_pm_domain *genpd = &rmobile_pd->genpd;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
- genpd->attach_dev = rmobile_pd_attach_dev;
- genpd->detach_dev = rmobile_pd_detach_dev;
+ genpd->attach_dev = cpg_mstp_attach_dev;
+ genpd->detach_dev = cpg_mstp_detach_dev;
__rmobile_pd_power_up(rmobile_pd, false);
}
}
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (!pd)
+ if (!pd) {
+ of_node_put(np);
return -ENOMEM;
+ }
pd->genpd.name = np->name;
pd->base = base;
#include <linux/pm_domain.h>
-#define DEFAULT_DEV_LATENCY_NS 250000
-
-struct platform_device;
-
struct rmobile_pm_domain {
struct generic_pm_domain genpd;
struct dev_power_governor *gov;
bool no_debug;
};
-struct pm_domain_device {
- const char *domain_name;
- struct platform_device *pdev;
-};
-
#endif /* PM_RMOBILE_H */
+++ /dev/null
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
- HPBDMA_SLAVE_DUMMY,
- HPBDMA_SLAVE_SDHI0_TX,
- HPBDMA_SLAVE_SDHI0_RX,
- HPBDMA_SLAVE_SSI0_TX,
- HPBDMA_SLAVE_SSI0_RX,
- HPBDMA_SLAVE_SSI1_TX,
- HPBDMA_SLAVE_SSI1_RX,
- HPBDMA_SLAVE_SSI2_TX,
- HPBDMA_SLAVE_SSI2_RX,
- HPBDMA_SLAVE_SSI3_TX,
- HPBDMA_SLAVE_SSI3_RX,
- HPBDMA_SLAVE_SSI4_TX,
- HPBDMA_SLAVE_SSI4_RX,
- HPBDMA_SLAVE_SSI5_TX,
- HPBDMA_SLAVE_SSI5_RX,
- HPBDMA_SLAVE_SSI6_TX,
- HPBDMA_SLAVE_SSI6_RX,
- HPBDMA_SLAVE_SSI7_TX,
- HPBDMA_SLAVE_SSI7_RX,
- HPBDMA_SLAVE_SSI8_TX,
- HPBDMA_SLAVE_SSI8_RX,
- HPBDMA_SLAVE_HPBIF0_TX,
- HPBDMA_SLAVE_HPBIF0_RX,
- HPBDMA_SLAVE_HPBIF1_TX,
- HPBDMA_SLAVE_HPBIF1_RX,
- HPBDMA_SLAVE_HPBIF2_TX,
- HPBDMA_SLAVE_HPBIF2_RX,
- HPBDMA_SLAVE_HPBIF3_TX,
- HPBDMA_SLAVE_HPBIF3_RX,
- HPBDMA_SLAVE_HPBIF4_TX,
- HPBDMA_SLAVE_HPBIF4_RX,
- HPBDMA_SLAVE_HPBIF5_TX,
- HPBDMA_SLAVE_HPBIF5_RX,
- HPBDMA_SLAVE_HPBIF6_TX,
- HPBDMA_SLAVE_HPBIF6_RX,
- HPBDMA_SLAVE_HPBIF7_TX,
- HPBDMA_SLAVE_HPBIF7_RX,
- HPBDMA_SLAVE_HPBIF8_TX,
- HPBDMA_SLAVE_HPBIF8_RX,
- HPBDMA_SLAVE_USBFUNC_TX,
- HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
#ifndef __ASM_R8A7779_H__
#define __ASM_R8A7779_H__
-#include <linux/sh_clk.h>
-
extern void r8a7779_pm_init(void);
-#ifdef CONFIG_PM
-extern void __init r8a7779_init_pm_domains(void);
-#else
-static inline void r8a7779_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
-
extern struct smp_operations r8a7779_smp_ops;
#endif /* __ASM_R8A7779_H__ */
*/
#include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
#include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "irqs.h"
-#include "r8a7778.h"
#define MODEMR 0xffcc0020
-#ifdef CONFIG_COMMON_CLK
static void __init r8a7778_timer_init(void)
{
u32 mode;
iounmap(modemr);
r8a7778_clocks_init(mode);
}
-#endif
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
- .type = PORT_SCIF, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(gic_iid(0x40)),
- DEFINE_RES_IRQ(gic_iid(0x41)),
- DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx) \
- platform_device_register_resndata( \
- NULL, "sh-tmu", idx, \
- sh_tmu##idx##_resources, \
- ARRAY_SIZE(sh_tmu##idx##_resources), \
- &sh_tmu##idx##_platform_data, \
- sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
- static struct usb_phy *phy = NULL;
- int ret = 0;
-
- if (!phy)
- phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
- if (IS_ERR(phy)) {
- pr_err("kernel doesn't have usb phy driver\n");
- return PTR_ERR(phy);
- }
-
- if (enable)
- ret = usb_phy_init(phy);
- else
- usb_phy_shutdown(phy);
-
- return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
- int ret = r8a7778_usb_phy_power(true);
-
- if (ret)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
- if (r8a7778_usb_phy_power(false))
- return;
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
- /*
- * Below are recommended values from the datasheet;
- * see [USB :: Setting of EHCI Internal Buffer].
- */
- /* EHCI IP internal buffer setting */
- iowrite32(0x00ff0040, hcd->regs + 0x0094);
- /* EHCI IP internal buffer enable */
- iowrite32(0x00000001, hcd->regs + 0x009C);
-
- return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
- .power_on = usb_power_on,
- .power_off = usb_power_off,
- .power_suspend = usb_power_off,
- .pre_setup = ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70000, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
- .power_on = usb_power_on,
- .power_off = usb_power_off,
- .power_suspend = usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70400, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci) \
-static struct platform_device_info hci##_info __initdata = { \
- .name = #hci "-platform", \
- .id = -1, \
- .res = hci##_resources, \
- .num_res = ARRAY_SIZE(hci##_resources), \
- .data = &hci##_pdata, \
- .size_data = sizeof(hci##_pdata), \
- .dma_mask = DMA_BIT_MASK(32), \
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
- DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx) \
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \
- DEFINE_RES_IRQ(gic_iid(0x87)), \
-}; \
- \
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
- .gpio_base = 32 * (idx), \
- .irq_base = GPIO_IRQ_BASE(idx), \
- .number_of_pins = 32, \
- .pctl_name = "pfc-r8a7778", \
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx) \
- platform_device_register_resndata( \
- NULL, "gpio_rcar", idx, \
- r8a7778_gpio##idx##_resources, \
- ARRAY_SIZE(r8a7778_gpio##idx##_resources), \
- &r8a7778_gpio##idx##_platform_data, \
- sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
- platform_device_register_simple(
- "pfc-r8a7778", -1,
- pfc_resources,
- ARRAY_SIZE(pfc_resources));
-
- r8a7778_register_gpio(0);
- r8a7778_register_gpio(1);
- r8a7778_register_gpio(2);
- r8a7778_register_gpio(3);
- r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
- /* I2C0 */
- DEFINE_RES_MEM(0xffc70000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x63)),
- /* I2C1 */
- DEFINE_RES_MEM(0xffc71000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6e)),
- /* I2C2 */
- DEFINE_RES_MEM(0xffc72000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6c)),
- /* I2C3 */
- DEFINE_RES_MEM(0xffc73000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
- BUG_ON(id < 0 || id > 3);
-
- platform_device_register_simple(
- "i2c-rcar", id,
- i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
- /* HSPI0 */
- DEFINE_RES_MEM(0xfffc7000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x5f)),
- /* HSPI1 */
- DEFINE_RES_MEM(0xfffc8000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x74)),
- /* HSPI2 */
- DEFINE_RES_MEM(0xfffc6000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
- BUG_ON(id < 0 || id > 2);
-
- platform_device_register_simple(
- "sh-hspi", id,
- hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
- if (base) {
- /*
- * Shared attribute override enable, 64K*16way
- * don't call iounmap(base)
- */
- l2x0_init(base, 0x00400000, 0xc20f0fff);
- }
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
-
-#define HPBDMA_SSI(_id) \
-{ \
- .id = HPBDMA_SLAVE_SSI## _id ##_TX, \
- .addr = 0xffd91008 + (_id * 0x40), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DMDL | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = _id + (_id << 8), \
- .dma_ch = (28 + _id), \
-}, { \
- .id = HPBDMA_SLAVE_SSI## _id ##_RX, \
- .addr = 0xffd9100c + (_id * 0x40), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SMDL | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = _id + (_id << 8), \
- .dma_ch = (28 + _id), \
-}
-
-#define HPBDMA_HPBIF(_id) \
-{ \
- .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \
- .addr = 0xffda0000 + (_id * 0x1000), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DMDL | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = 0x1111, \
- .dma_ch = (28 + _id), \
-}, { \
- .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \
- .addr = 0xffda0000 + (_id * 0x1000), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SMDL | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = 0x1111, \
- .dma_ch = (28 + _id), \
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
- {
- .id = HPBDMA_SLAVE_SDHI0_TX,
- .addr = 0xffe4c000 + 0x30,
- .dcr = HPB_DMAE_DCR_SPDS_16BIT |
- HPB_DMAE_DCR_DMDL |
- HPB_DMAE_DCR_DPDS_16BIT,
- .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
- HPB_DMAE_ASYNCRSTR_ASRST22 |
- HPB_DMAE_ASYNCRSTR_ASRST23,
- .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
- .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK,
- .port = 0x0D0C,
- .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
- .dma_ch = 21,
- }, {
- .id = HPBDMA_SLAVE_SDHI0_RX,
- .addr = 0xffe4c000 + 0x30,
- .dcr = HPB_DMAE_DCR_SMDL |
- HPB_DMAE_DCR_SPDS_16BIT |
- HPB_DMAE_DCR_DPDS_16BIT,
- .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
- HPB_DMAE_ASYNCRSTR_ASRST22 |
- HPB_DMAE_ASYNCRSTR_ASRST23,
- .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
- .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK,
- .port = 0x0D0C,
- .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
- .dma_ch = 22,
- }, {
- .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
- .addr = 0xffe60018,
- .dcr = HPB_DMAE_DCR_SPDS_32BIT |
- HPB_DMAE_DCR_DMDL |
- HPB_DMAE_DCR_DPDS_32BIT,
- .port = 0x0000,
- .dma_ch = 14,
- }, {
- .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
- .addr = 0xffe6001c,
- .dcr = HPB_DMAE_DCR_SMDL |
- HPB_DMAE_DCR_SPDS_32BIT |
- HPB_DMAE_DCR_DPDS_32BIT,
- .port = 0x0101,
- .dma_ch = 15,
- },
-
- HPBDMA_SSI(0),
- HPBDMA_SSI(1),
- HPBDMA_SSI(2),
- HPBDMA_SSI(3),
- HPBDMA_SSI(4),
- HPBDMA_SSI(5),
- HPBDMA_SSI(6),
- HPBDMA_SSI(7),
- HPBDMA_SSI(8),
-
- HPBDMA_HPBIF(0),
- HPBDMA_HPBIF(1),
- HPBDMA_HPBIF(2),
- HPBDMA_HPBIF(3),
- HPBDMA_HPBIF(4),
- HPBDMA_HPBIF(5),
- HPBDMA_HPBIF(6),
- HPBDMA_HPBIF(7),
- HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
- HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
- HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
- HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
- HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
- .slaves = hpb_dmae_slaves,
- .num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
- .channels = hpb_dmae_channels,
- .num_channels = ARRAY_SIZE(hpb_dmae_channels),
- .ts_shift = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- },
- .num_hw_channels = 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
- /* Channel registers */
- DEFINE_RES_MEM(0xffc08000, 0x1000),
- /* Common registers */
- DEFINE_RES_MEM(0xffc09000, 0x170),
- /* Asynchronous reset registers */
- DEFINE_RES_MEM(0xffc00300, 4),
- /* Asynchronous mode registers */
- DEFINE_RES_MEM(0xffc00400, 4),
- /* IRQ for DMA channels */
- DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
- platform_device_register_resndata(NULL, "hpb-dma-engine",
- -1, hpb_dmae_resources,
- ARRAY_SIZE(hpb_dmae_resources),
- &dma_platform_data,
- sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
- r8a7778_add_dt_devices();
- r8a7778_register_tmu(0);
- r8a7778_register_scif(0);
- r8a7778_register_scif(1);
- r8a7778_register_scif(2);
- r8a7778_register_scif(3);
- r8a7778_register_scif(4);
- r8a7778_register_scif(5);
- r8a7778_register_i2c(0);
- r8a7778_register_i2c(1);
- r8a7778_register_i2c(2);
- r8a7778_register_i2c(3);
- r8a7778_register_hspi(0);
- r8a7778_register_hspi(1);
- r8a7778_register_hspi(2);
-
- r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
- shmobile_init_late();
- platform_device_register_full(&ehci_info);
- platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
- .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
- .sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
- DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
- DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
- DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
- DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
- DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
- DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
- DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
- DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
- DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
- void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
- unsigned long tmp;
-
- if (!icr0) {
- pr_warn("r8a7778: unable to setup external irq pin mode\n");
- return;
- }
-
- tmp = ioread32(icr0);
- if (irlm)
- tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
- else
- tmp &= ~(1 << 23); /* IRL mode - not supported */
- tmp |= (1 << 21); /* LVLMODE = 1 */
- iowrite32(tmp, icr0);
- iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
- r8a7778_init_irq_extpin_dt(irlm);
- if (irlm)
- platform_device_register_resndata(
- NULL, "renesas_intc_irqpin", -1,
- irqpin_resources, ARRAY_SIZE(irqpin_resources),
- &irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
#define INT2NTSR0 0x00018 /* 0xfe700018 */
#define INT2NTSR1 0x0002c /* 0xfe70002c */
-void __init r8a7778_init_irq_dt(void)
+
+static void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
- void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
- void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
BUG_ON(!base);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
irqchip_init();
-#endif
+
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
.init_time = r8a7778_timer_init,
-#endif
.dt_compat = r8a7778_compat_dt,
MACHINE_END
-
-#endif /* CONFIG_USE_OF */
+++ /dev/null
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
- __raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
shmobile_setup_delay_hz(max_freq, 2, 4);
}
}
-
-static void __init shmobile_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- early_platform_driver_register_all("earlytimer");
- early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
- late_time_init = shmobile_late_time_init;
-}
-
*
* Called with IRQs disabled
*/
-void __ref spear13xx_cpu_die(unsigned int cpu)
+void spear13xx_cpu_die(unsigned int cpu)
{
int spurious = 0;
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
"allwinner,sun5i-a13",
+ "allwinner,sun5i-r8",
NULL,
};
-DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
.dt_compat = sunxi_board_dt_compat,
.init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static struct gpiod_lookup_table wifi_gpio_lookup = {
.dev_id = "rfkill_gpio",
.table = {
- GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
- GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+ GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
+ GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
{ },
},
};
*
* Called with IRQs disabled
*/
-void __ref tegra_cpu_die(unsigned int cpu)
+void tegra_cpu_die(unsigned int cpu)
{
if (!tegra_hotplug_shutdown) {
WARN(1, "hotplug is not yet initialized\n");
obj-y := uniphier.o
-obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+ENTRY(uniphier_smp_trampoline)
+ARM_BE8(setend be) @ ensure we are in BE8 mode
+ mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Reg)
+ and r2, r0, #0x3 @ CPU ID
+ ldr r1, uniphier_smp_trampoline_jump
+ ldr r3, uniphier_smp_trampoline_poll_addr
+ mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
+ orr r0, r0, #CR_I @ Enable ICache
+ bic r0, r0, #(CR_C | CR_M) @ Disable MMU and Dcache
+ mcr p15, 0, r0, c1, c0, 0
+ b 1f @ cache the following 5 instructions
+0: wfe
+1: ldr r0, [r3]
+ cmp r0, r2
+ bxeq r1 @ branch to secondary_startup
+ b 0b
+ .globl uniphier_smp_trampoline_jump
+uniphier_smp_trampoline_jump:
+ .word 0 @ set virt_to_phys(secondary_startup)
+ .globl uniphier_smp_trampoline_poll_addr
+uniphier_smp_trampoline_poll_addr:
+ .word 0 @ set CPU ID to be kicked to this reg
+ .globl uniphier_smp_trampoline_end
+uniphier_smp_trampoline_end:
+ENDPROC(uniphier_smp_trampoline)
* GNU General Public License for more details.
*/
-#include <linux/sizes.h>
-#include <linux/compiler.h>
+#define pr_fmt(fmt) "uniphier: " fmt
+
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sizes.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/smp_scu.h>
-static struct regmap *sbcm_regmap;
+/*
+ * The secondary CPUs check this register from the boot ROM for the jump
+ * destination. After that, it can be reused as a scratch register.
+ */
+#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+static void __iomem *uniphier_smp_rom_boot_rsv2;
+static unsigned int uniphier_smp_max_cpus;
+
+extern char uniphier_smp_trampoline;
+extern char uniphier_smp_trampoline_jump;
+extern char uniphier_smp_trampoline_poll_addr;
+extern char uniphier_smp_trampoline_end;
+
+/*
+ * Copy trampoline code to the tail of the 1st section of the page table used
+ * in the boot ROM. This area is directly accessible by the secondary CPUs
+ * for all the UniPhier SoCs.
+ */
+static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
+static phys_addr_t uniphier_smp_trampoline_dest;
+
+static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
{
- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- unsigned long scu_base_phys = 0;
- void __iomem *scu_base;
+ size_t trmp_size;
+ static void __iomem *trmp_base;
- sbcm_regmap = syscon_regmap_lookup_by_compatible(
- "socionext,uniphier-system-bus-controller-misc");
- if (IS_ERR(sbcm_regmap)) {
- pr_err("failed to regmap system-bus-controller-misc\n");
- goto err;
+ if (!uniphier_cache_l2_is_enabled()) {
+ pr_warn("outer cache is needed for SMP, but not enabled\n");
+ return -ENODEV;
}
+ uniphier_cache_l2_set_locked_ways(1);
+
+ outer_flush_all();
+
+ trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
+ uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
+ trmp_size;
+
+ uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
+ uniphier_smp_trampoline_dest_end);
+
+ trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
+ if (!trmp_base) {
+ pr_err("failed to map trampoline destination area\n");
+ return -ENOMEM;
+ }
+
+ memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
+
+ writel(virt_to_phys(secondary_startup),
+ trmp_base + (&uniphier_smp_trampoline_jump -
+ &uniphier_smp_trampoline));
+
+ writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
+ &uniphier_smp_trampoline));
+
+ flush_cache_all(); /* flush out trampoline code to outer cache */
+
+ iounmap(trmp_base);
+
+ return 0;
+}
+
+static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
+{
+ struct device_node *np;
+ struct resource res;
+ phys_addr_t rom_rsv2_phys;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "socionext,uniphier-system-bus-controller");
+ ret = of_address_to_resource(np, 1, &res);
+ if (ret) {
+ pr_err("failed to get resource of system-bus-controller\n");
+ return ret;
+ }
+
+ rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2;
+
+ ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
+ if (ret)
+ return ret;
+
+ uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+ if (!uniphier_smp_rom_boot_rsv2) {
+ pr_err("failed to map ROM_BOOT_RSV2 register\n");
+ return -ENOMEM;
+ }
+
+ writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
+ asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
+
+ uniphier_smp_max_cpus = max_cpus; /* save for later use */
+
+ return 0;
+}
+
+static void __init uniphier_smp_unprepare_trampoline(void)
+{
+ iounmap(uniphier_smp_rom_boot_rsv2);
+
+ if (uniphier_smp_trampoline_dest)
+ outer_inv_range(uniphier_smp_trampoline_dest,
+ uniphier_smp_trampoline_dest_end);
+
+ uniphier_cache_l2_set_locked_ways(0);
+}
+
+static int __init uniphier_smp_enable_scu(void)
+{
+ unsigned long scu_base_phys = 0;
+ void __iomem *scu_base;
+
if (scu_a9_has_base())
scu_base_phys = scu_a9_get_base();
if (!scu_base_phys) {
pr_err("failed to get scu base\n");
- goto err;
+ return -ENODEV;
}
scu_base = ioremap(scu_base_phys, SZ_128);
if (!scu_base) {
- pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
- goto err;
+ pr_err("failed to map scu base\n");
+ return -ENOMEM;
}
scu_enable(scu_base);
iounmap(scu_base);
+ return 0;
+}
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+ int ret;
+
+ ret = uniphier_smp_prepare_trampoline(max_cpus);
+ if (ret)
+ goto err;
+
+ ret = uniphier_smp_enable_scu();
+ if (ret)
+ goto err;
+
return;
err:
pr_warn("disabling SMP\n");
init_cpu_present(&only_cpu_0);
- sbcm_regmap = NULL;
+ uniphier_smp_unprepare_trampoline();
}
-static int uniphier_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
+static int __init uniphier_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
{
- int ret;
+ if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
+ return -EFAULT;
- if (!sbcm_regmap)
- return -ENODEV;
+ writel(cpu, uniphier_smp_rom_boot_rsv2);
+ readl(uniphier_smp_rom_boot_rsv2); /* relax */
- ret = regmap_write(sbcm_regmap, 0x1208,
- virt_to_phys(secondary_startup));
- if (!ret)
- asm("sev"); /* wake up secondary CPU */
+ asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
+
+ if (cpu == uniphier_smp_max_cpus - 1) {
+ /* clean up resources if this is the last CPU */
+ uniphier_smp_unprepare_trampoline();
+ }
- return ret;
+ return 0;
}
-struct smp_operations uniphier_smp_ops __initdata = {
+static struct smp_operations uniphier_smp_ops __initdata = {
.smp_prepare_cpus = uniphier_smp_prepare_cpus,
- .smp_boot_secondary = uniphier_boot_secondary,
+ .smp_boot_secondary = uniphier_smp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
&uniphier_smp_ops);
*
* Called with IRQs disabled
*/
-void __ref ux500_cpu_die(unsigned int cpu)
+void ux500_cpu_die(unsigned int cpu)
{
/* directly enter low power state, skipping secure registers */
for (;;) {
*
* Called with IRQs disabled
*/
-void __ref vexpress_cpu_die(unsigned int cpu)
+void vexpress_cpu_die(unsigned int cpu)
{
int spurious = 0;
config CPU_32v3
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
a few prototypes like that in existence) and therefore access to
that required register must be emulated.
-config NEEDS_SYSCALL_FOR_CMPXCHG
- bool
- select NEED_KUSER_HELPERS
- help
- SMP on a pre-ARMv6 processor? Well OK then.
- Forget about fast user space cmpxchg support.
- It is just not possible.
-
config NEED_KUSER_HELPERS
bool
This option enables the Tauros2 L2 cache controller (as
found on PJ1/PJ4).
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier outer cache controller"
+ depends on ARCH_UNIPHIER
+ default y
+ select OUTER_CACHE
+ select OUTER_CACHE_SYNC
+ help
+ This option enables the UniPhier outer cache (system cache)
+ controller.
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
+obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "uniphier: " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
+
+/* control registers */
+#define UNIPHIER_SSCC 0x0 /* Control Register */
+#define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */
+#define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */
+#define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */
+#define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */
+#define UNIPHIER_SSCC_ON BIT(0) /* enable cache */
+#define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID 0x0 /* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */
+#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
+#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
+#define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */
+#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
+#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
+#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
+#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
+#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
+#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
+#define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */
+#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
+#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
+#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
+#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
+#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
+#define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/
+#define UNIPHIER_SSCOPPQSEF_FE BIT(1)
+#define UNIPHIER_SSCOPPQSEF_OE BIT(0)
+#define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */
+#define UNIPHIER_SSCOLPQS_EF BIT(2)
+#define UNIPHIER_SSCOLPQS_EST BIT(1)
+#define UNIPHIER_SSCOLPQS_QST BIT(0)
+
+/* Is the touch/pre-fetch destination specified by ways? */
+#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
+ ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
+/* Is the operation region specified by address range? */
+#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
+ ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+
+/**
+ * uniphier_cache_data - UniPhier outer cache specific data
+ *
+ * @ctrl_base: virtual base address of control registers
+ * @rev_base: virtual base address of revision registers
+ * @op_base: virtual base address of operation registers
+ * @way_present_mask: each bit specifies if the way is present
+ * @way_locked_mask: each bit specifies if the way is locked
+ * @nsets: number of associativity sets
+ * @line_size: line size in bytes
+ * @range_op_max_size: max size that can be handled by a single range operation
+ * @list: list node to include this level in the whole cache hierarchy
+ */
+struct uniphier_cache_data {
+ void __iomem *ctrl_base;
+ void __iomem *rev_base;
+ void __iomem *op_base;
+ u32 way_present_mask;
+ u32 way_locked_mask;
+ u32 nsets;
+ u32 line_size;
+ u32 range_op_max_size;
+ struct list_head list;
+};
+
+/*
+ * List of the whole outer cache hierarchy. This list is only modified during
+ * the early boot stage, so no mutex is taken for the access to the list.
+ */
+static LIST_HEAD(uniphier_cache_list);
+
+/**
+ * __uniphier_cache_sync - perform a sync point for a particular cache level
+ *
+ * @data: cache controller specific data
+ */
+static void __uniphier_cache_sync(struct uniphier_cache_data *data)
+{
+ /* This sequence need not be atomic. Do not disable IRQ. */
+ writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
+ data->op_base + UNIPHIER_SSCOPE);
+ /* need a read back to confirm */
+ readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
+}
+
+/**
+ * __uniphier_cache_maint_common - run a queue operation for a particular level
+ *
+ * @data: cache controller specific data
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @operation: flags to specify the desired cache operation
+ */
+static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
+ unsigned long start,
+ unsigned long size,
+ u32 operation)
+{
+ unsigned long flags;
+
+ /*
+ * No spin lock is necessary here because:
+ *
+ * [1] This outer cache controller is able to accept maintenance
+ * operations from multiple CPUs at a time in an SMP system; if a
+ * maintenance operation is under way and another operation is issued,
+ * the new one is stored in the queue. The controller performs one
+ * operation after another. If the queue is full, the status register,
+ * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
+ * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
+ * different instances for each CPU, i.e. each CPU can track the status
+ * of the maintenance operations triggered by itself.
+ *
+ * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
+ * SSCOQWN}, are shared between multiple CPUs, but the hardware still
+ * guarantees the registration sequence is atomic; the write access to
+ * them are arbitrated by the hardware. The first accessor to the
+ * register, UNIPHIER_SSCOQM, holds the access right and it is released
+ * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU
+ * is holding the access right, other CPUs fail to register operations.
+ * One CPU should not hold the access right for a long time, so local
+ * IRQs should be disabled while the following sequence.
+ */
+ local_irq_save(flags);
+
+ /* clear the complete notification flag */
+ writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
+
+ do {
+ /* set cache operation */
+ writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
+ data->op_base + UNIPHIER_SSCOQM);
+
+ /* set address range if needed */
+ if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
+ writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
+ writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
+ }
+
+ /* set target ways if needed */
+ if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
+ writel_relaxed(data->way_locked_mask,
+ data->op_base + UNIPHIER_SSCOQWN);
+ } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
+ (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+ /* wait until the operation is completed */
+ while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
+ UNIPHIER_SSCOLPQS_EF))
+ cpu_relax();
+
+ local_irq_restore(flags);
+}
+
+static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
+ u32 operation)
+{
+ __uniphier_cache_maint_common(data, 0, 0,
+ UNIPHIER_SSCOQM_S_ALL | operation);
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
+ unsigned long start, unsigned long end,
+ u32 operation)
+{
+ unsigned long size;
+
+ /*
+ * If the start address is not aligned,
+ * perform a cache operation for the first cache-line
+ */
+ start = start & ~(data->line_size - 1);
+
+ size = end - start;
+
+ if (unlikely(size >= (unsigned long)(-data->line_size))) {
+ /* this means cache operation for all range */
+ __uniphier_cache_maint_all(data, operation);
+ return;
+ }
+
+ /*
+ * If the end address is not aligned,
+ * perform a cache operation for the last cache-line
+ */
+ size = ALIGN(size, data->line_size);
+
+ while (size) {
+ unsigned long chunk_size = min_t(unsigned long, size,
+ data->range_op_max_size);
+
+ __uniphier_cache_maint_common(data, start, chunk_size,
+ UNIPHIER_SSCOQM_S_RANGE | operation);
+
+ start += chunk_size;
+ size -= chunk_size;
+ }
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
+{
+ u32 val = 0;
+
+ if (on)
+ val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
+
+ writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
+}
+
+static void __init __uniphier_cache_set_locked_ways(
+ struct uniphier_cache_data *data,
+ u32 way_mask)
+{
+ data->way_locked_mask = way_mask & data->way_present_mask;
+
+ writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+ data->ctrl_base + UNIPHIER_SSCLPDAWCR);
+}
+
+static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
+ u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_range(data, start, end, operation);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_all(data, operation);
+}
+
+static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
+}
+
+static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void __init uniphier_cache_inv_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_flush_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void uniphier_cache_disable(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry_reverse(data, &uniphier_cache_list, list)
+ __uniphier_cache_enable(data, false);
+
+ uniphier_cache_flush_all();
+}
+
+static void __init uniphier_cache_enable(void)
+{
+ struct uniphier_cache_data *data;
+
+ uniphier_cache_inv_all();
+
+ list_for_each_entry(data, &uniphier_cache_list, list) {
+ __uniphier_cache_enable(data, true);
+ __uniphier_cache_set_locked_ways(data, 0);
+ }
+}
+
+static void uniphier_cache_sync(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_sync(data);
+}
+
+int __init uniphier_cache_l2_is_enabled(void)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (!data)
+ return 0;
+
+ return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
+ UNIPHIER_SSCC_ON);
+}
+
+void __init uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_maint_range(data, start, end,
+ UNIPHIER_SSCOQM_TID_WAY |
+ UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_set_locked_ways(data, way_mask);
+}
+
+static const struct of_device_id uniphier_cache_match[] __initconst = {
+ {
+ .compatible = "socionext,uniphier-system-cache",
+ },
+ { /* sentinel */ }
+};
+
+static struct device_node * __init uniphier_cache_get_next_level_node(
+ struct device_node *np)
+{
+ u32 phandle;
+
+ if (of_property_read_u32(np, "next-level-cache", &phandle))
+ return NULL;
+
+ return of_find_node_by_phandle(phandle);
+}
+
+static int __init __uniphier_cache_init(struct device_node *np,
+ unsigned int *cache_level)
+{
+ struct uniphier_cache_data *data;
+ u32 level, cache_size;
+ struct device_node *next_np;
+ int ret = 0;
+
+ if (!of_match_node(uniphier_cache_match, np)) {
+ pr_err("L%d: not compatible with uniphier cache\n",
+ *cache_level);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "cache-level", &level)) {
+ pr_err("L%d: cache-level is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ if (level != *cache_level) {
+ pr_err("L%d: cache-level is unexpected value %d\n",
+ *cache_level, level);
+ return -EINVAL;
+ }
+
+ if (!of_property_read_bool(np, "cache-unified")) {
+ pr_err("L%d: cache-unified is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
+ !is_power_of_2(data->line_size)) {
+ pr_err("L%d: cache-line-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
+ !is_power_of_2(data->nsets)) {
+ pr_err("L%d: cache-sets is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-size", &cache_size) ||
+ cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
+ pr_err("L%d: cache-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ data->way_present_mask =
+ ((u32)1 << cache_size / data->nsets / data->line_size) - 1;
+
+ data->ctrl_base = of_iomap(np, 0);
+ if (!data->ctrl_base) {
+ pr_err("L%d: failed to map control register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->rev_base = of_iomap(np, 1);
+ if (!data->rev_base) {
+ pr_err("L%d: failed to map revision register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->op_base = of_iomap(np, 2);
+ if (!data->op_base) {
+ pr_err("L%d: failed to map operation register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (*cache_level == 2) {
+ u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
+ /*
+ * The size of range operation is limited to (1 << 22) or less
+ * for PH-sLD8 or older SoCs.
+ */
+ if (revision <= 0x16)
+ data->range_op_max_size = (u32)1 << 22;
+ }
+
+ data->range_op_max_size -= data->line_size;
+
+ INIT_LIST_HEAD(&data->list);
+ list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
+
+ /*
+ * OK, this level has been successfully initialized. Look for the next
+ * level cache. Do not roll back even if the initialization of the
+ * next level cache fails because we want to continue with available
+ * cache levels.
+ */
+ next_np = uniphier_cache_get_next_level_node(np);
+ if (next_np) {
+ (*cache_level)++;
+ ret = __uniphier_cache_init(next_np, cache_level);
+ }
+ of_node_put(next_np);
+
+ return ret;
+err:
+ iounmap(data->op_base);
+ iounmap(data->rev_base);
+ iounmap(data->ctrl_base);
+ kfree(data);
+
+ return ret;
+}
+
+int __init uniphier_cache_init(void)
+{
+ struct device_node *np = NULL;
+ unsigned int cache_level;
+ int ret = 0;
+
+ /* look for level 2 cache */
+ while ((np = of_find_matching_node(np, uniphier_cache_match)))
+ if (!of_property_read_u32(np, "cache-level", &cache_level) &&
+ cache_level == 2)
+ break;
+
+ if (!np)
+ return -ENODEV;
+
+ ret = __uniphier_cache_init(np, &cache_level);
+ of_node_put(np);
+
+ if (ret) {
+ /*
+ * Error out iif L2 initialization fails. Continue with any
+ * error on L3 or outer because they are optional.
+ */
+ if (cache_level == 2) {
+ pr_err("failed to initialize L2 cache\n");
+ return ret;
+ }
+
+ cache_level--;
+ ret = 0;
+ }
+
+ outer_cache.inv_range = uniphier_cache_inv_range;
+ outer_cache.clean_range = uniphier_cache_clean_range;
+ outer_cache.flush_range = uniphier_cache_flush_range;
+ outer_cache.flush_all = uniphier_cache_flush_all;
+ outer_cache.disable = uniphier_cache_disable;
+ outer_cache.sync = uniphier_cache_sync;
+
+ uniphier_cache_enable();
+
+ pr_info("enabled outer cache (cache level: %d)\n", cache_level);
+
+ return ret;
+}
unsigned long uaddr = vma->vm_start;
unsigned long usize = vma->vm_end - vma->vm_start;
struct page **pages = __iommu_get_pages(cpu_addr, attrs);
+ unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ unsigned long off = vma->vm_pgoff;
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
if (!pages)
return -ENXIO;
+ if (off >= nr_pages || (usize >> PAGE_SHIFT) > nr_pages - off)
+ return -ENXIO;
+
+ pages += off;
+
do {
int ret = vm_insert_page(vma, uaddr, *pages++);
if (ret) {
arm_notify_die("", regs, &info, ifsr, 0);
}
+/*
+ * Abort handler to be used only during first unmasking of asynchronous aborts
+ * on the boot CPU. This makes sure that the machine will not die if the
+ * firmware/bootloader left an imprecise abort pending for us to trip over.
+ */
+static int __init early_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during "
+ "first unmask, this is most likely caused by a "
+ "firmware/bootloader bug.\n", fsr);
+
+ return 0;
+}
+
+void __init early_abt_enable(void)
+{
+ fsr_info[22].fn = early_abort_handler;
+ local_abt_enable();
+ fsr_info[22].fn = do_bad;
+}
+
#ifndef CONFIG_ARM_LPAE
static int __init exceptions_init(void)
{
void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
+void early_abt_enable(void);
#endif /* __ARCH_ARM_FAULT_H */
#include <asm/mach/pci.h>
#include <asm/fixmap.h>
+#include "fault.h"
#include "mm.h"
#include "tcm.h"
*/
local_flush_tlb_all();
flush_cache_all();
+
+ /* Enable asynchronous aborts */
+ early_abt_enable();
}
static void __init kmap_init(void)
case BPF_LD | BPF_B | BPF_IND:
load_order = 0;
load_ind:
+ update_on_xread(ctx);
OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
goto load_common;
case BPF_LDX | BPF_IMM:
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = &orion_ge00_shared.dev;
+ d->chip[i].host_dev = &orion_ge_mvmdio.dev;
orion_switch_device.dev.platform_data = d;
platform_device_register(&orion_switch_device);
#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
* it does.
*/
-#include <byteswap.h>
#include <elf.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/types.h>
#include <unistd.h>
+#define swab16(x) \
+ ((((x) & 0x00ff) << 8) | \
+ (((x) & 0xff00) >> 8))
+
+#define swab32(x) \
+ ((((x) & 0x000000ff) << 24) | \
+ (((x) & 0x0000ff00) << 8) | \
+ (((x) & 0x00ff0000) >> 8) | \
+ (((x) & 0xff000000) >> 24))
+
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
#define HOST_ORDER ELFDATA2LSB
#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
static Elf32_Word read_elf_word(Elf32_Word word, bool swap)
{
- return swap ? bswap_32(word) : word;
+ return swap ? swab32(word) : word;
}
static Elf32_Half read_elf_half(Elf32_Half half, bool swap)
{
- return swap ? bswap_16(half) : half;
+ return swap ? swab16(half) : half;
}
static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap)
{
- *dst = swap ? bswap_32(val) : val;
+ *dst = swap ? swab32(val) : val;
}
int main(int argc, char **argv)
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
config PGTABLE_LEVELS
int
+ default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
- default 4 if ARM64_4K_PAGES && ARM64_VA_BITS_48
+ default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+ default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
source "init/Kconfig"
help
This feature enables 4KB pages support.
+config ARM64_16K_PAGES
+ bool "16KB"
+ help
+ The system will use 16KB pages support. AArch32 emulation
+ requires applications compiled with 16K (or a multiple of 16K)
+ aligned segments.
+
config ARM64_64K_PAGES
bool "64KB"
help
This feature enables 64KB pages support (4KB by default)
allowing only two levels of page tables and faster TLB
- look-up. AArch32 emulation is not available when this feature
- is enabled.
+ look-up. AArch32 emulation requires applications compiled
+ with 64K aligned segments.
endchoice
choice
prompt "Virtual address space size"
default ARM64_VA_BITS_39 if ARM64_4K_PAGES
+ default ARM64_VA_BITS_47 if ARM64_16K_PAGES
default ARM64_VA_BITS_42 if ARM64_64K_PAGES
help
Allows choosing one of multiple possible virtual address
space sizes. The level of translation table is determined by
a combination of page size and virtual address space size.
+config ARM64_VA_BITS_36
+ bool "36-bit" if EXPERT
+ depends on ARM64_16K_PAGES
+
config ARM64_VA_BITS_39
bool "39-bit"
depends on ARM64_4K_PAGES
bool "42-bit"
depends on ARM64_64K_PAGES
+config ARM64_VA_BITS_47
+ bool "47-bit"
+ depends on ARM64_16K_PAGES
+
config ARM64_VA_BITS_48
bool "48-bit"
config ARM64_VA_BITS
int
+ default 36 if ARM64_VA_BITS_36
default 39 if ARM64_VA_BITS_39
default 42 if ARM64_VA_BITS_42
+ default 47 if ARM64_VA_BITS_47
default 48 if ARM64_VA_BITS_48
config CPU_BIG_ENDIAN
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
+ select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
source kernel/Kconfig.preempt
-
-config HZ
- int
- default 100
+source kernel/Kconfig.hz
config ARCH_HAS_HOLES_MEMORYMODEL
def_bool y if SPARSEMEM
def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS
- default y
- help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
+ def_bool y
+ depends on ARM_PMU
config SYS_SUPPORTS_HUGETLBFS
def_bool y
def_bool y
config ARCH_WANT_HUGE_PMD_SHARE
- def_bool y if !ARM64_64K_PAGES
+ def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
def_bool y
config FORCE_MAX_ZONEORDER
int
default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+ default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ We make sure that we can allocate upto a HugePage size for each configuration.
+ Hence we have :
+ MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
+
+ However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
+ 4M allocations matching the default size used by generic code.
menuconfig ARMV8_DEPRECATED
bool "Emulate deprecated/obsolete ARMv8 instructions"
config COMPAT
bool "Kernel support for 32-bit EL0"
- depends on !ARM64_64K_PAGES || EXPERT
+ depends on ARM64_4K_PAGES || EXPERT
select COMPAT_BINFMT_ELF
select HAVE_UID16
select OLD_SIGSUSPEND3
the user helper functions, VFP support and the ptrace interface are
handled appropriately by the kernel.
- If you also enabled CONFIG_ARM64_64K_PAGES, please be aware that you
- will only be able to execute AArch32 binaries that were compiled with
- 64k aligned segments.
+ If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
+ that you will only be able to execute AArch32 binaries that were compiled
+ with page size aligned segments.
If you want to execute 32-bit userspace applications, say Y.
If in doubt, say Y
config DEBUG_ALIGN_RODATA
- depends on DEBUG_RODATA && !ARM64_64K_PAGES
+ depends on DEBUG_RODATA && ARM64_4K_PAGES
bool "Align linker sections up to SECTION_SIZE"
help
If this option is enabled, sections that may potentially be marked as
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
+ select ARCH_REQUIRE_GPIOLIB
select DW_APB_ICTL
help
This enables support for Marvell Berlin SoC Family
help
This enables support for Samsung Exynos7 SoC family
-config ARCH_FSL_LS2085A
- bool "Freescale LS2085A SOC"
+config ARCH_LAYERSCAPE
+ bool "ARMv8 based Freescale Layerscape SoC family"
help
- This enables support for Freescale LS2085A SOC.
+ This enables support for the Freescale Layerscape SoC family.
config ARCH_HISI
bool "Hisilicon SoC Family"
help
This enables support for AMD Seattle SOC Family
+config ARCH_STRATIX10
+ bool "Altera's Stratix 10 SoCFPGA Family"
+ help
+ This enables support for Altera's Stratix 10 SoCFPGA Family.
+
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
CHECKFLAGS += -D__aarch64__
ifeq ($(CONFIG_ARM64_ERRATUM_843419), y)
-CFLAGS_MODULE += -mcmodel=large
+KBUILD_CFLAGS_MODULE += -mcmodel=large
endif
# Default value
TEXT_OFFSET := 0x00080000
endif
+# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - 3)) - (1 << 61)
+# in 32-bit arithmetic
+KASAN_SHADOW_OFFSET := $(shell printf "0x%08x00000000\n" $$(( \
+ (0xffffffff & (-1 << ($(CONFIG_ARM64_VA_BITS) - 32))) \
+ + (1 << ($(CONFIG_ARM64_VA_BITS) - 32 - 3)) \
+ - (1 << (64 - 32 - 3)) )) )
+
export TEXT_OFFSET GZFLAGS
core-y += arch/arm64/kernel/ arch/arm64/mm/
+dts-dirs += altera
dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
--- /dev/null
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "altr,socfpga-stratix10";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 120 8>,
+ <0 121 8>,
+ <0 122 8>,
+ <0 123 8>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ intc: intc@fffc1000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0xfffc1000 0x1000>,
+ <0x0 0xfffc2000 0x2000>,
+ <0x0 0xfffc4000 0x2000>,
+ <0x0 0xfffc6000 0x2000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges = <0 0 0 0xffffffff>;
+
+ clkmgr@ffd1000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd10000 0x1000>;
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 90 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 91 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 92 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc03200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03200 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ gpio1: gpio@ffc03300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03300 0x100>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ i2c0: i2c@ffc02800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02800 0x100>;
+ interrupts = <0 103 4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02900 0x100>;
+ interrupts = <0 104 4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02a00 0x100>;
+ interrupts = <0 105 4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02b00 0x100>;
+ interrupts = <0 106 4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02c00 0x100>;
+ interrupts = <0 107 4>;
+ status = "disabled";
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 96 4>;
+ fifo-depth = <0x400>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x100000>;
+ };
+
+ rst: rstmgr@ffd11000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd11000 0x1000>;
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x1000>;
+ interrupts = <0 101 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x1000>;
+ interrupts = <0 102 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd12000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd12000 0x1000>;
+ };
+
+ /* Local timer */
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ timer0: timer0@ffc03000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 113 4>;
+ reg = <0xffc03000 0x100>;
+ };
+
+ timer1: timer1@ffc03100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 114 4>;
+ reg = <0xffc03100 0x100>;
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 4>;
+ reg = <0xffd00000 0x100>;
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 4>;
+ reg = <0xffd00100 0x100>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 108 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 109 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0x40000>;
+ interrupts = <0 93 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0x40000>;
+ interrupts = <0 94 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 117 4>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 118 4>;
+ status = "disabled";
+ };
+
+ watchdog2: watchdog@ffd00400 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00400 0x100>;
+ interrupts = <0 125 4>;
+ status = "disabled";
+ };
+
+ watchdog3: watchdog@ffd00500 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00500 0x100>;
+ interrupts = <0 126 4>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SoCFPGA Stratix 10 SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+ model = "APM X-Gene Merlin board";
+ compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "POWER";
+ linux,code = <116>;
+ linux,input-type = <0x1>;
+ interrupts = <0x0 0x28 0x1>;
+ };
+ };
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
+};
+
+&serial0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&sata2 {
+ status = "ok";
+};
+
+&sata3 {
+ status = "ok";
+};
+
+&sgenet0 {
+ status = "ok";
+};
+
+&xgenet1 {
+ status = "ok";
+};
interrupts = <0x0 0x2d 0x1>;
};
};
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
};
&pcie0clk {
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-shadowcat";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller@78090000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
+ <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
+ <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
+ <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff04>, /* Secure Phys IRQ */
+ <1 13 0xff04>, /* Non-secure Phys IRQ */
+ <1 14 0xff04>, /* Virt IRQ */
+ <1 15 0xff04>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ xge0clk: xge0clk@1f61c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f61c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge0clk";
+ };
+
+ xge1clk: xge1clk@1f62c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f62c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge1clk";
+ };
+ };
+
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
+ serial0: serial@10600000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x10600000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f200000 0x0 0x1000>,
+ <0x0 0x1f20d000 0x0 0x1000>,
+ <0x0 0x1f20e000 0x0 0x1000>;
+ interrupts = <0x0 0x5a 0x4>;
+ dma-coherent;
+ };
+
+ sata2: sata@1a200000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a200000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>;
+ interrupts = <0x0 0x5b 0x4>;
+ dma-coherent;
+ };
+
+ sata3: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>;
+ interrupts = <0x0 0x5c 0x4>;
+ dma-coherent;
+ };
+
+ sbgpio: sbgpio@17001000{
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>,
+ <0x0 0x2e 0x1>,
+ <0x0 0x2f 0x1>;
+ };
+
+ sgenet0: ethernet@1f610000 {
+ compatible = "apm,xgene2-sgenet";
+ status = "disabled";
+ reg = <0x0 0x1f610000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X20000>;
+ interrupts = <0 96 4>,
+ <0 97 4>;
+ dma-coherent;
+ clocks = <&xge0clk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "sgmii";
+ };
+
+ xgenet1: ethernet@1f620000 {
+ compatible = "apm,xgene2-xgenet";
+ status = "disabled";
+ reg = <0x0 0x1f620000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X220000>;
+ interrupts = <0 108 4>,
+ <0 109 4>;
+ port-id = <1>;
+ dma-coherent;
+ clocks = <&xge1clk 0>;
+ local-mac-address = [00 01 73 00 00 02];
+ phy-connection-type = "xgmii";
+ };
+ };
+};
clock-frequency = <50000000>;
};
+ pmu {
+ compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
0x0 0x1f 0x4>;
};
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
};
};
+ mailbox: mhu@2b1f0000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x2b1f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ };
+
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
+ sram: sram@2e000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x2e000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x2e000000 0x8000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+ };
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
/include/ "juno-clocks.dtsi"
dma@7ff00000 {
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
button@6 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <99>;
label = "NMI";
gpios = <&iofpga_gpio0 5 0x4>;
};
};
+ flash@0,00000000 {
+ /* 2 * 32MiB NOR Flash memory mounted on CS0 */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ linux,part-probe = "afs";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <4>;
+ /*
+ * Unfortunately, accessing the flash disturbs
+ * the CPU idle states (suspend) and CPU
+ * hotplug of the platform. For this reason,
+ * flash hardware access is disabled by default.
+ */
+ status = "disabled";
+ };
+
ethernet@2,00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A57_1: cpu@1 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A53_0: cpu@100 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_1: cpu@101 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_2: cpu@102 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_3: cpu@103 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A57_L2: l2-cache0 {
};
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&A57_0>,
- <&A57_1>,
- <&A53_0>,
+ interrupt-affinity = <&A53_0>,
<&A53_1>,
<&A53_2>,
<&A53_3>;
#include "juno-base.dtsi"
+ pcie-controller@40000000 {
+ compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+ <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+ <0 0 0 2 &gic 0 0 0 137 4>,
+ <0 0 0 3 &gic 0 0 0 138 4>,
+ <0 0 0 4 &gic 0 0 0 139 4>;
+ msi-parent = <&v2m_0>;
+ };
};
&memtimer {
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A57_1: cpu@1 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A53_0: cpu@100 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_1: cpu@101 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_2: cpu@102 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_3: cpu@103 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A57_L2: l2-cache0 {
};
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&A57_0>,
- <&A57_1>,
- <&A53_0>,
+ interrupt-affinity = <&A53_0>,
<&A53_1>,
<&A53_2>,
<&A53_3>;
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+ /include/ "vexpress-v2m-rs1.dtsi"
};
};
--- /dev/null
+../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file
samsung,pin-drv = <2>;
};
};
+
+&pinctrl_bus1 {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf5: gpf5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv6: gpv6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi5_bus: spi5-bus {
+ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out {
+ samsung,pins = "gpg2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ ufs_rst_n: ufs-rst-n {
+ samsung,pins = "gph1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
pinctrl5 = &pinctrl_ese;
pinctrl6 = &pinctrl_fsys0;
pinctrl7 = &pinctrl_fsys1;
+ pinctrl8 = &pinctrl_bus1;
};
cpus {
interrupts = <0 203 0>;
};
+ pinctrl_bus1: pinctrl@14870000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14870000 0x1000>;
+ interrupts = <0 384 0>;
+ };
+
hsi2c_0: hsi2c@13640000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13640000 0x1000>;
-dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2080a QDS Board";
+ compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fl008k {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2080a RDB Board";
+ compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "disabled";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
/*
- * Device Tree file for Freescale LS2085a software Simulator model
+ * Device Tree file for Freescale LS2080a software Simulator model
*
- * Copyright (C) 2014, Freescale Semiconductor
+ * Copyright (C) 2014-2015, Freescale Semiconductor
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/dts-v1/;
-/include/ "fsl-ls2085a.dtsi"
+/include/ "fsl-ls2080a.dtsi"
/ {
- model = "Freescale Layerscape 2085a software Simulator model";
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+ model = "Freescale Layerscape 2080a software Simulator model";
+ compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
ethernet@2210000 {
compatible = "smsc,lan91c111";
interrupts = <0 58 0x1>;
};
};
+
+&ifc {
+ status = "okay";
+};
+
--- /dev/null
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "fsl,ls2080a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /*
+ * We expect the enable-method for cpu's to be "psci", but this
+ * is dependent on the SoC FW, which will fill this in.
+ *
+ * Currently supported enable-method is psci v0.2
+ */
+
+ /* We have 4 clusters having 2 Cortex-A57 cores each */
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x0>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x1>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x100>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x101>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x200>;
+ clocks = <&clockgen 1 2>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x201>;
+ clocks = <&clockgen 1 2>;
+ };
+
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x300>;
+ clocks = <&clockgen 1 3>;
+ };
+
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x301>;
+ clocks = <&clockgen 1 3>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+ <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+ <1 11 0x8>, /* Virtual PPI, active-low */
+ <1 10 0x8>; /* Hypervisor PPI, active-low */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls2080a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ serial0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ serial1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>, <0 212 4>,
+ <0 213 4>, <0 214 4>,
+ <0 215 4>, <0 216 4>,
+ <0 217 4>, <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>, <0 147 4>,
+ <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>,
+ <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>,
+ <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>,
+ <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>,
+ <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>,
+ <0 168 4>, <0 169 4>,
+ <0 170 4>, <0 171 4>,
+ <0 172 4>, <0 173 4>,
+ <0 174 4>, <0 175 4>,
+ <0 176 4>, <0 177 4>,
+ <0 178 4>, <0 179 4>,
+ <0 180 4>, <0 181 4>,
+ <0 182 4>, <0 183 4>,
+ <0 184 4>, <0 185 4>,
+ <0 186 4>, <0 187 4>,
+ <0 188 4>, <0 189 4>,
+ <0 190 4>, <0 191 4>,
+ <0 192 4>, <0 193 4>,
+ <0 194 4>, <0 195 4>,
+ <0 196 4>, <0 197 4>,
+ <0 198 4>, <0 199 4>,
+ <0 200 4>, <0 201 4>,
+ <0 202 4>, <0 203 4>,
+ <0 204 4>, <0 205 4>,
+ <0 206 4>, <0 207 4>,
+ <0 208 4>, <0 209 4>;
+ mmu-masters = <&fsl_mc 0x300 0>;
+ };
+
+ dspi: dspi@2100000 {
+ status = "disabled";
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 26 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ };
+
+ esdhc: esdhc@2140000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>; /* Updated by bootloader */
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ bus-width = <4>;
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0: i2c@2000000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c1: i2c@2010000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c2: i2c@2020000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c3: i2c@2030000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 0x4>; /* Level high type */
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ };
+
+ qspi: quadspi@20c0000 {
+ status = "disabled";
+ compatible = "fsl,vf610-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ };
+
+ pcie@3400000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+ <0000 0 0 2 &gic 0 0 0 110 4>,
+ <0000 0 0 3 &gic 0 0 0 111 4>,
+ <0000 0 0 4 &gic 0 0 0 112 4>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 113 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+ <0000 0 0 2 &gic 0 0 0 115 4>,
+ <0000 0 0 3 &gic 0 0 0 116 4>,
+ <0000 0 0 4 &gic 0 0 0 117 4>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+ <0000 0 0 2 &gic 0 0 0 120 4>,
+ <0000 0 0 3 &gic 0 0 0 121 4>,
+ <0000 0 0 4 &gic 0 0 0 122 4>;
+ };
+
+ pcie@3700000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 123 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+ <0000 0 0 2 &gic 0 0 0 125 4>,
+ <0000 0 0 3 &gic 0 0 0 126 4>,
+ <0000 0 0 4 &gic 0 0 0 127 4>;
+ };
+
+ sata0: sata@3200000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 133 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ };
+
+ sata1: sata@3210000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>;
+ interrupts = <0 136 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ };
+
+ usb0: usb3@3100000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ usb1: usb3@3110000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ ccn@4000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0x04000000 0x0 0x01000000>;
+ interrupts = <0 12 4>;
+ };
+ };
+};
+++ /dev/null
-/*
- * Device Tree Include file for Freescale Layerscape-2085A family SoC.
- *
- * Copyright (C) 2014, Freescale Semiconductor
- *
- * Bhupesh Sharma <bhupesh.sharma@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
- compatible = "fsl,ls2085a";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- /*
- * We expect the enable-method for cpu's to be "psci", but this
- * is dependent on the SoC FW, which will fill this in.
- *
- * Currently supported enable-method is psci v0.2
- */
-
- /* We have 4 clusters having 2 Cortex-A57 cores each */
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x0>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x1>;
- };
-
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- };
-
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- };
-
- cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x200>;
- };
-
- cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x201>;
- };
-
- cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x300>;
- };
-
- cpu@301 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x301>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>;
- /* DRAM space - 1, size : 2 GB DRAM */
- };
-
- gic: interrupt-controller@6000000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
- <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <1 9 0x4>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
- <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
- <1 11 0x8>, /* Virtual PPI, active-low */
- <1 10 0x8>; /* Hypervisor PPI, active-low */
- };
-
- serial0: serial@21c0500 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- clock-frequency = <0>; /* Updated by bootloader */
- interrupts = <0 32 0x1>; /* edge triggered */
- };
-
- serial1: serial@21c0600 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- clock-frequency = <0>; /* Updated by bootloader */
- interrupts = <0 32 0x1>; /* edge triggered */
- };
-
- fsl_mc: fsl-mc@80c000000 {
- compatible = "fsl,qoriq-mc";
- reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
- <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- };
-};
-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
aliases {
- serial0 = &uart0;
+ serial0 = &uart0; /* On board UART0 */
+ serial1 = &uart1; /* BT UART */
+ serial2 = &uart2; /* LS Expansion UART0 */
+ serial3 = &uart3; /* LS Expansion UART1 */
};
chosen {
- stdout-path = "serial0:115200n8";
+ stdout-path = "serial3:115200n8";
};
memory@0 {
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
/ {
compatible = "hisilicon,hi6220";
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+ <&ao_ctrl HI6220_UART0_PCLK>;
clock-names = "uartclk", "apb_pclk";
};
+
+ uart1: uart@f7111000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7111000 0x0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+ <&sys_ctrl HI6220_UART1_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@f7112000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7112000 0x0 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+ <&sys_ctrl HI6220_UART2_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart@f7113000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7113000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+ <&sys_ctrl HI6220_UART3_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart4: uart@f7114000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7114000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+ <&sys_ctrl HI6220_UART4_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
};
};
--- /dev/null
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip05.dtsi"
+
+/ {
+ model = "Hisilicon Hip05 D02 Development Board";
+ compatible = "hisilicon,hip05-d02";
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
--- /dev/null
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hip05-d02";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ core2 {
+ cpu = <&cpu10>;
+ };
+ core3 {
+ cpu = <&cpu11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&cpu12>;
+ };
+ core1 {
+ cpu = <&cpu13>;
+ };
+ core2 {
+ cpu = <&cpu14>;
+ };
+ core3 {
+ cpu = <&cpu15>;
+ };
+ };
+ };
+
+ cpu0: cpu@20000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@20001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@20002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20002>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@20003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20003>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@20100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@20101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@20102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@20103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20103>;
+ enable-method = "psci";
+ };
+
+ cpu8: cpu@20200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20200>;
+ enable-method = "psci";
+ };
+
+ cpu9: cpu@20201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20201>;
+ enable-method = "psci";
+ };
+
+ cpu10: cpu@20202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20202>;
+ enable-method = "psci";
+ };
+
+ cpu11: cpu@20203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20203>;
+ enable-method = "psci";
+ };
+
+ cpu12: cpu@20300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20300>;
+ enable-method = "psci";
+ };
+
+ cpu13: cpu@20301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20301>;
+ enable-method = "psci";
+ };
+
+ cpu14: cpu@20302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20302>;
+ enable-method = "psci";
+ };
+
+ cpu15: cpu@20303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20303>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@8d000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x30000>;
+ reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
+ <0x0 0x8d100000 0 0x300000>, /* GICR */
+ <0x0 0xfe000000 0 0x10000>, /* GICC */
+ <0x0 0xfe010000 0 0x10000>, /* GICH */
+ <0x0 0xfe020000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its_totems: interrupt-controller@8c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x8c000000 0x0 0x40000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk200mhz: refclk200mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart0: uart@80300000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: uart@80310000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT STB board";
+ compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe80000 0x10000>;
+ interrupt-parent = <&aic>;
+
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
+ aic: interrupt-controller@3800 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ soc_pinctrl: pin-controller@ea8000 {
+ compatible = "marvell,berlin4ct-soc-pinctrl";
+ reg = <0xea8000 0x14>;
+ };
+
+ avio_pinctrl: pin-controller@ea8400 {
+ compatible = "marvell,berlin4ct-avio-pinctrl";
+ reg = <0xea8400 0x8>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ sm_gpio0: gpio@8000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x8000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio1: gpio@9000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x9000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
uart0: uart@d000 {
compatible = "snps,dw-apb-uart";
reg = <0xd000 0x100>;
clocks = <&osc>;
reg-shift = <2>;
status = "disabled";
+ pinctrl-0 = <&uart0_pmux>;
+ pinctrl-names = "default";
+ };
+ };
+
+ system_pinctrl: pin-controller@fe2200 {
+ compatible = "marvell,berlin4ct-system-pinctrl";
+ reg = <0xfe2200 0xc>;
+
+ uart0_pmux: uart0-pmux {
+ groups = "SM_URT0_TXD", "SM_URT0_RXD";
+ function = "uart0";
};
};
};
};
};
+&pio {
+ spi_pins_a: spi0 {
+ pins_spi {
+ pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
+ <MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
+ <MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
+ <MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_a>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
clock-output-names = "clk32k";
};
+ cpum_ck: oscillator@2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "cpum_ck";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
#power-domain-cells = <1>;
reg = <0 0x10006000 0 0x1000>;
clocks = <&clk26m>,
- <&topckgen CLK_TOP_MM_SEL>;
- clock-names = "mfg", "mm";
+ <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mfg", "mm", "venc", "venc_lt";
infracfg = <&infracfg>;
};
status = "disabled";
};
- i2c3: i2c3@11010000 {
+ spi: spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ i2c3: i2c@11010000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11010000 0 0x70>,
<0 0x11000280 0 0x80>;
status = "disabled";
};
- i2c4: i2c4@11011000 {
+ i2c4: i2c@11011000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11011000 0 0x70>,
<0 0x11000300 0 0x80>;
status = "disabled";
};
- i2c6: i2c6@11013000 {
+ i2c6: i2c@11013000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11013000 0 0x70>,
<0 0x11000080 0 0x80>;
clock-names = "source", "hclk";
status = "disabled";
};
+
+ mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8173-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8173-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: clock-controller@18000000 {
+ compatible = "mediatek,mt8173-vencsys", "syscon";
+ reg = <0 0x18000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencltsys: clock-controller@19000000 {
+ compatible = "mediatek,mt8173-vencltsys", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
};
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart1;
};
chosen {
pinctrl-1 = <&blsp1_uart2_sleep>;
};
+ i2c@78b6000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ i2c@78ba000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ spi@78b7000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ spi@78b9000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
};
};
};
+
+&sdhc_1 {
+ status = "okay";
+};
&msmgpio {
+ blsp1_uart1_default: blsp1_uart1_default {
+ pinmux {
+ function = "blsp_uart1";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
- function = "blsp_uart2";
+ function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
};
};
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
i2c4_default: i2c4_default {
pinmux {
function = "blsp_i2c4";
i2c4_sleep: i2c4_sleep {
pinmux {
- function = "blsp_i2c4";
+ function = "gpio";
pins = "gpio14", "gpio15";
};
pinconf {
};
};
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
sdhc2_cd_pin {
sdc2_cd_on: cd_on {
pinmux {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0x1800000 0x80000>;
};
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
status = "disabled";
};
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x1000>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x1000>;
status = "disabled";
};
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78ba000 0x1000>;
+ interrupts = <GIC_SPI 100 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
interrupt-controller;
#interrupt-cells = <4>;
};
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
};
};
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_EXYNOS7=y
-CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
+CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_SMP=y
+CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_QUP=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_QUP=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_EXYNOS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_SYSCON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_QCOM_BAM_DMA=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
+CONFIG_HWSPINLOCK_QCOM=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
str \src, [\tmp, :lo12:\sym]
.endm
+/*
+ * Annotate a function as position independent, i.e., safe to be called before
+ * the kernel virtual mapping is activated.
+ */
+#define ENDPIPROC(x) \
+ .globl __pi_##x; \
+ .type __pi_##x, %function; \
+ .set __pi_##x, x; \
+ .size __pi_##x, . - x; \
+ ENDPROC(x)
+
#endif /* __ASM_ASSEMBLER_H */
#define atomic_read(v) READ_ONCE((v)->counter)
#define atomic_set(v, i) (((v)->counter) = (i))
+
+#define atomic_add_return_relaxed atomic_add_return_relaxed
+#define atomic_add_return_acquire atomic_add_return_acquire
+#define atomic_add_return_release atomic_add_return_release
+#define atomic_add_return atomic_add_return
+
+#define atomic_inc_return_relaxed(v) atomic_add_return_relaxed(1, (v))
+#define atomic_inc_return_acquire(v) atomic_add_return_acquire(1, (v))
+#define atomic_inc_return_release(v) atomic_add_return_release(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+#define atomic_sub_return_relaxed atomic_sub_return_relaxed
+#define atomic_sub_return_acquire atomic_sub_return_acquire
+#define atomic_sub_return_release atomic_sub_return_release
+#define atomic_sub_return atomic_sub_return
+
+#define atomic_dec_return_relaxed(v) atomic_sub_return_relaxed(1, (v))
+#define atomic_dec_return_acquire(v) atomic_sub_return_acquire(1, (v))
+#define atomic_dec_return_release(v) atomic_sub_return_release(1, (v))
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+
+#define atomic_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new))
+#define atomic_xchg_acquire(v, new) xchg_acquire(&((v)->counter), (new))
+#define atomic_xchg_release(v, new) xchg_release(&((v)->counter), (new))
#define atomic_xchg(v, new) xchg(&((v)->counter), (new))
+
+#define atomic_cmpxchg_relaxed(v, old, new) \
+ cmpxchg_relaxed(&((v)->counter), (old), (new))
+#define atomic_cmpxchg_acquire(v, old, new) \
+ cmpxchg_acquire(&((v)->counter), (old), (new))
+#define atomic_cmpxchg_release(v, old, new) \
+ cmpxchg_release(&((v)->counter), (old), (new))
#define atomic_cmpxchg(v, old, new) cmpxchg(&((v)->counter), (old), (new))
#define atomic_inc(v) atomic_add(1, (v))
#define atomic_dec(v) atomic_sub(1, (v))
-#define atomic_inc_return(v) atomic_add_return(1, (v))
-#define atomic_dec_return(v) atomic_sub_return(1, (v))
#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
#define ATOMIC64_INIT ATOMIC_INIT
#define atomic64_read atomic_read
#define atomic64_set atomic_set
+
+#define atomic64_add_return_relaxed atomic64_add_return_relaxed
+#define atomic64_add_return_acquire atomic64_add_return_acquire
+#define atomic64_add_return_release atomic64_add_return_release
+#define atomic64_add_return atomic64_add_return
+
+#define atomic64_inc_return_relaxed(v) atomic64_add_return_relaxed(1, (v))
+#define atomic64_inc_return_acquire(v) atomic64_add_return_acquire(1, (v))
+#define atomic64_inc_return_release(v) atomic64_add_return_release(1, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1, (v))
+
+#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed
+#define atomic64_sub_return_acquire atomic64_sub_return_acquire
+#define atomic64_sub_return_release atomic64_sub_return_release
+#define atomic64_sub_return atomic64_sub_return
+
+#define atomic64_dec_return_relaxed(v) atomic64_sub_return_relaxed(1, (v))
+#define atomic64_dec_return_acquire(v) atomic64_sub_return_acquire(1, (v))
+#define atomic64_dec_return_release(v) atomic64_sub_return_release(1, (v))
+#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
+
+#define atomic64_xchg_relaxed atomic_xchg_relaxed
+#define atomic64_xchg_acquire atomic_xchg_acquire
+#define atomic64_xchg_release atomic_xchg_release
#define atomic64_xchg atomic_xchg
+
+#define atomic64_cmpxchg_relaxed atomic_cmpxchg_relaxed
+#define atomic64_cmpxchg_acquire atomic_cmpxchg_acquire
+#define atomic64_cmpxchg_release atomic_cmpxchg_release
#define atomic64_cmpxchg atomic_cmpxchg
#define atomic64_inc(v) atomic64_add(1, (v))
#define atomic64_dec(v) atomic64_sub(1, (v))
-#define atomic64_inc_return(v) atomic64_add_return(1, (v))
-#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0)
#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0)
} \
__LL_SC_EXPORT(atomic_##op);
-#define ATOMIC_OP_RETURN(op, asm_op) \
+#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op) \
__LL_SC_INLINE int \
-__LL_SC_PREFIX(atomic_##op##_return(int i, atomic_t *v)) \
+__LL_SC_PREFIX(atomic_##op##_return##name(int i, atomic_t *v)) \
{ \
unsigned long tmp; \
int result; \
\
- asm volatile("// atomic_" #op "_return\n" \
+ asm volatile("// atomic_" #op "_return" #name "\n" \
" prfm pstl1strm, %2\n" \
-"1: ldxr %w0, %2\n" \
+"1: ld" #acq "xr %w0, %2\n" \
" " #asm_op " %w0, %w0, %w3\n" \
-" stlxr %w1, %w0, %2\n" \
-" cbnz %w1, 1b" \
+" st" #rel "xr %w1, %w0, %2\n" \
+" cbnz %w1, 1b\n" \
+" " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: "Ir" (i) \
- : "memory"); \
+ : cl); \
\
- smp_mb(); \
return result; \
} \
-__LL_SC_EXPORT(atomic_##op##_return);
+__LL_SC_EXPORT(atomic_##op##_return##name);
+
+#define ATOMIC_OPS(...) \
+ ATOMIC_OP(__VA_ARGS__) \
+ ATOMIC_OP_RETURN( , dmb ish, , l, "memory", __VA_ARGS__)
-#define ATOMIC_OPS(op, asm_op) \
- ATOMIC_OP(op, asm_op) \
- ATOMIC_OP_RETURN(op, asm_op)
+#define ATOMIC_OPS_RLX(...) \
+ ATOMIC_OPS(__VA_ARGS__) \
+ ATOMIC_OP_RETURN(_relaxed, , , , , __VA_ARGS__)\
+ ATOMIC_OP_RETURN(_acquire, , a, , "memory", __VA_ARGS__)\
+ ATOMIC_OP_RETURN(_release, , , l, "memory", __VA_ARGS__)
-ATOMIC_OPS(add, add)
-ATOMIC_OPS(sub, sub)
+ATOMIC_OPS_RLX(add, add)
+ATOMIC_OPS_RLX(sub, sub)
ATOMIC_OP(and, and)
ATOMIC_OP(andnot, bic)
ATOMIC_OP(or, orr)
ATOMIC_OP(xor, eor)
+#undef ATOMIC_OPS_RLX
#undef ATOMIC_OPS
#undef ATOMIC_OP_RETURN
#undef ATOMIC_OP
} \
__LL_SC_EXPORT(atomic64_##op);
-#define ATOMIC64_OP_RETURN(op, asm_op) \
+#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op) \
__LL_SC_INLINE long \
-__LL_SC_PREFIX(atomic64_##op##_return(long i, atomic64_t *v)) \
+__LL_SC_PREFIX(atomic64_##op##_return##name(long i, atomic64_t *v)) \
{ \
long result; \
unsigned long tmp; \
\
- asm volatile("// atomic64_" #op "_return\n" \
+ asm volatile("// atomic64_" #op "_return" #name "\n" \
" prfm pstl1strm, %2\n" \
-"1: ldxr %0, %2\n" \
+"1: ld" #acq "xr %0, %2\n" \
" " #asm_op " %0, %0, %3\n" \
-" stlxr %w1, %0, %2\n" \
-" cbnz %w1, 1b" \
+" st" #rel "xr %w1, %0, %2\n" \
+" cbnz %w1, 1b\n" \
+" " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: "Ir" (i) \
- : "memory"); \
+ : cl); \
\
- smp_mb(); \
return result; \
} \
-__LL_SC_EXPORT(atomic64_##op##_return);
+__LL_SC_EXPORT(atomic64_##op##_return##name);
+
+#define ATOMIC64_OPS(...) \
+ ATOMIC64_OP(__VA_ARGS__) \
+ ATOMIC64_OP_RETURN(, dmb ish, , l, "memory", __VA_ARGS__)
-#define ATOMIC64_OPS(op, asm_op) \
- ATOMIC64_OP(op, asm_op) \
- ATOMIC64_OP_RETURN(op, asm_op)
+#define ATOMIC64_OPS_RLX(...) \
+ ATOMIC64_OPS(__VA_ARGS__) \
+ ATOMIC64_OP_RETURN(_relaxed,, , , , __VA_ARGS__) \
+ ATOMIC64_OP_RETURN(_acquire,, a, , "memory", __VA_ARGS__) \
+ ATOMIC64_OP_RETURN(_release,, , l, "memory", __VA_ARGS__)
-ATOMIC64_OPS(add, add)
-ATOMIC64_OPS(sub, sub)
+ATOMIC64_OPS_RLX(add, add)
+ATOMIC64_OPS_RLX(sub, sub)
ATOMIC64_OP(and, and)
ATOMIC64_OP(andnot, bic)
ATOMIC64_OP(or, orr)
ATOMIC64_OP(xor, eor)
+#undef ATOMIC64_OPS_RLX
#undef ATOMIC64_OPS
#undef ATOMIC64_OP_RETURN
#undef ATOMIC64_OP
}
__LL_SC_EXPORT(atomic64_dec_if_positive);
-#define __CMPXCHG_CASE(w, sz, name, mb, rel, cl) \
+#define __CMPXCHG_CASE(w, sz, name, mb, acq, rel, cl) \
__LL_SC_INLINE unsigned long \
__LL_SC_PREFIX(__cmpxchg_case_##name(volatile void *ptr, \
unsigned long old, \
\
asm volatile( \
" prfm pstl1strm, %[v]\n" \
- "1: ldxr" #sz "\t%" #w "[oldval], %[v]\n" \
+ "1: ld" #acq "xr" #sz "\t%" #w "[oldval], %[v]\n" \
" eor %" #w "[tmp], %" #w "[oldval], %" #w "[old]\n" \
" cbnz %" #w "[tmp], 2f\n" \
" st" #rel "xr" #sz "\t%w[tmp], %" #w "[new], %[v]\n" \
} \
__LL_SC_EXPORT(__cmpxchg_case_##name);
-__CMPXCHG_CASE(w, b, 1, , , )
-__CMPXCHG_CASE(w, h, 2, , , )
-__CMPXCHG_CASE(w, , 4, , , )
-__CMPXCHG_CASE( , , 8, , , )
-__CMPXCHG_CASE(w, b, mb_1, dmb ish, l, "memory")
-__CMPXCHG_CASE(w, h, mb_2, dmb ish, l, "memory")
-__CMPXCHG_CASE(w, , mb_4, dmb ish, l, "memory")
-__CMPXCHG_CASE( , , mb_8, dmb ish, l, "memory")
+__CMPXCHG_CASE(w, b, 1, , , , )
+__CMPXCHG_CASE(w, h, 2, , , , )
+__CMPXCHG_CASE(w, , 4, , , , )
+__CMPXCHG_CASE( , , 8, , , , )
+__CMPXCHG_CASE(w, b, acq_1, , a, , "memory")
+__CMPXCHG_CASE(w, h, acq_2, , a, , "memory")
+__CMPXCHG_CASE(w, , acq_4, , a, , "memory")
+__CMPXCHG_CASE( , , acq_8, , a, , "memory")
+__CMPXCHG_CASE(w, b, rel_1, , , l, "memory")
+__CMPXCHG_CASE(w, h, rel_2, , , l, "memory")
+__CMPXCHG_CASE(w, , rel_4, , , l, "memory")
+__CMPXCHG_CASE( , , rel_8, , , l, "memory")
+__CMPXCHG_CASE(w, b, mb_1, dmb ish, , l, "memory")
+__CMPXCHG_CASE(w, h, mb_2, dmb ish, , l, "memory")
+__CMPXCHG_CASE(w, , mb_4, dmb ish, , l, "memory")
+__CMPXCHG_CASE( , , mb_8, dmb ish, , l, "memory")
#undef __CMPXCHG_CASE
: "x30");
}
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- register int w0 asm ("w0") = i;
- register atomic_t *x1 asm ("x1") = v;
+#define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \
+static inline int atomic_add_return##name(int i, atomic_t *v) \
+{ \
+ register int w0 asm ("w0") = i; \
+ register atomic_t *x1 asm ("x1") = v; \
+ \
+ asm volatile(ARM64_LSE_ATOMIC_INSN( \
+ /* LL/SC */ \
+ " nop\n" \
+ __LL_SC_ATOMIC(add_return##name), \
+ /* LSE atomics */ \
+ " ldadd" #mb " %w[i], w30, %[v]\n" \
+ " add %w[i], %w[i], w30") \
+ : [i] "+r" (w0), [v] "+Q" (v->counter) \
+ : "r" (x1) \
+ : "x30" , ##cl); \
+ \
+ return w0; \
+}
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " nop\n"
- __LL_SC_ATOMIC(add_return),
- /* LSE atomics */
- " ldaddal %w[i], w30, %[v]\n"
- " add %w[i], %w[i], w30")
- : [i] "+r" (w0), [v] "+Q" (v->counter)
- : "r" (x1)
- : "x30", "memory");
+ATOMIC_OP_ADD_RETURN(_relaxed, )
+ATOMIC_OP_ADD_RETURN(_acquire, a, "memory")
+ATOMIC_OP_ADD_RETURN(_release, l, "memory")
+ATOMIC_OP_ADD_RETURN( , al, "memory")
- return w0;
-}
+#undef ATOMIC_OP_ADD_RETURN
static inline void atomic_and(int i, atomic_t *v)
{
: "x30");
}
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- register int w0 asm ("w0") = i;
- register atomic_t *x1 asm ("x1") = v;
-
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " nop\n"
- __LL_SC_ATOMIC(sub_return)
- " nop",
- /* LSE atomics */
- " neg %w[i], %w[i]\n"
- " ldaddal %w[i], w30, %[v]\n"
- " add %w[i], %w[i], w30")
- : [i] "+r" (w0), [v] "+Q" (v->counter)
- : "r" (x1)
- : "x30", "memory");
-
- return w0;
+#define ATOMIC_OP_SUB_RETURN(name, mb, cl...) \
+static inline int atomic_sub_return##name(int i, atomic_t *v) \
+{ \
+ register int w0 asm ("w0") = i; \
+ register atomic_t *x1 asm ("x1") = v; \
+ \
+ asm volatile(ARM64_LSE_ATOMIC_INSN( \
+ /* LL/SC */ \
+ " nop\n" \
+ __LL_SC_ATOMIC(sub_return##name) \
+ " nop", \
+ /* LSE atomics */ \
+ " neg %w[i], %w[i]\n" \
+ " ldadd" #mb " %w[i], w30, %[v]\n" \
+ " add %w[i], %w[i], w30") \
+ : [i] "+r" (w0), [v] "+Q" (v->counter) \
+ : "r" (x1) \
+ : "x30" , ##cl); \
+ \
+ return w0; \
}
+ATOMIC_OP_SUB_RETURN(_relaxed, )
+ATOMIC_OP_SUB_RETURN(_acquire, a, "memory")
+ATOMIC_OP_SUB_RETURN(_release, l, "memory")
+ATOMIC_OP_SUB_RETURN( , al, "memory")
+
+#undef ATOMIC_OP_SUB_RETURN
#undef __LL_SC_ATOMIC
#define __LL_SC_ATOMIC64(op) __LL_SC_CALL(atomic64_##op)
: "x30");
}
-static inline long atomic64_add_return(long i, atomic64_t *v)
-{
- register long x0 asm ("x0") = i;
- register atomic64_t *x1 asm ("x1") = v;
+#define ATOMIC64_OP_ADD_RETURN(name, mb, cl...) \
+static inline long atomic64_add_return##name(long i, atomic64_t *v) \
+{ \
+ register long x0 asm ("x0") = i; \
+ register atomic64_t *x1 asm ("x1") = v; \
+ \
+ asm volatile(ARM64_LSE_ATOMIC_INSN( \
+ /* LL/SC */ \
+ " nop\n" \
+ __LL_SC_ATOMIC64(add_return##name), \
+ /* LSE atomics */ \
+ " ldadd" #mb " %[i], x30, %[v]\n" \
+ " add %[i], %[i], x30") \
+ : [i] "+r" (x0), [v] "+Q" (v->counter) \
+ : "r" (x1) \
+ : "x30" , ##cl); \
+ \
+ return x0; \
+}
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " nop\n"
- __LL_SC_ATOMIC64(add_return),
- /* LSE atomics */
- " ldaddal %[i], x30, %[v]\n"
- " add %[i], %[i], x30")
- : [i] "+r" (x0), [v] "+Q" (v->counter)
- : "r" (x1)
- : "x30", "memory");
+ATOMIC64_OP_ADD_RETURN(_relaxed, )
+ATOMIC64_OP_ADD_RETURN(_acquire, a, "memory")
+ATOMIC64_OP_ADD_RETURN(_release, l, "memory")
+ATOMIC64_OP_ADD_RETURN( , al, "memory")
- return x0;
-}
+#undef ATOMIC64_OP_ADD_RETURN
static inline void atomic64_and(long i, atomic64_t *v)
{
: "x30");
}
-static inline long atomic64_sub_return(long i, atomic64_t *v)
-{
- register long x0 asm ("x0") = i;
- register atomic64_t *x1 asm ("x1") = v;
+#define ATOMIC64_OP_SUB_RETURN(name, mb, cl...) \
+static inline long atomic64_sub_return##name(long i, atomic64_t *v) \
+{ \
+ register long x0 asm ("x0") = i; \
+ register atomic64_t *x1 asm ("x1") = v; \
+ \
+ asm volatile(ARM64_LSE_ATOMIC_INSN( \
+ /* LL/SC */ \
+ " nop\n" \
+ __LL_SC_ATOMIC64(sub_return##name) \
+ " nop", \
+ /* LSE atomics */ \
+ " neg %[i], %[i]\n" \
+ " ldadd" #mb " %[i], x30, %[v]\n" \
+ " add %[i], %[i], x30") \
+ : [i] "+r" (x0), [v] "+Q" (v->counter) \
+ : "r" (x1) \
+ : "x30" , ##cl); \
+ \
+ return x0; \
+}
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " nop\n"
- __LL_SC_ATOMIC64(sub_return)
- " nop",
- /* LSE atomics */
- " neg %[i], %[i]\n"
- " ldaddal %[i], x30, %[v]\n"
- " add %[i], %[i], x30")
- : [i] "+r" (x0), [v] "+Q" (v->counter)
- : "r" (x1)
- : "x30", "memory");
+ATOMIC64_OP_SUB_RETURN(_relaxed, )
+ATOMIC64_OP_SUB_RETURN(_acquire, a, "memory")
+ATOMIC64_OP_SUB_RETURN(_release, l, "memory")
+ATOMIC64_OP_SUB_RETURN( , al, "memory")
- return x0;
-}
+#undef ATOMIC64_OP_SUB_RETURN
static inline long atomic64_dec_if_positive(atomic64_t *v)
{
return x0; \
}
-__CMPXCHG_CASE(w, b, 1, )
-__CMPXCHG_CASE(w, h, 2, )
-__CMPXCHG_CASE(w, , 4, )
-__CMPXCHG_CASE(x, , 8, )
-__CMPXCHG_CASE(w, b, mb_1, al, "memory")
-__CMPXCHG_CASE(w, h, mb_2, al, "memory")
-__CMPXCHG_CASE(w, , mb_4, al, "memory")
-__CMPXCHG_CASE(x, , mb_8, al, "memory")
+__CMPXCHG_CASE(w, b, 1, )
+__CMPXCHG_CASE(w, h, 2, )
+__CMPXCHG_CASE(w, , 4, )
+__CMPXCHG_CASE(x, , 8, )
+__CMPXCHG_CASE(w, b, acq_1, a, "memory")
+__CMPXCHG_CASE(w, h, acq_2, a, "memory")
+__CMPXCHG_CASE(w, , acq_4, a, "memory")
+__CMPXCHG_CASE(x, , acq_8, a, "memory")
+__CMPXCHG_CASE(w, b, rel_1, l, "memory")
+__CMPXCHG_CASE(w, h, rel_2, l, "memory")
+__CMPXCHG_CASE(w, , rel_4, l, "memory")
+__CMPXCHG_CASE(x, , rel_8, l, "memory")
+__CMPXCHG_CASE(w, b, mb_1, al, "memory")
+__CMPXCHG_CASE(w, h, mb_2, al, "memory")
+__CMPXCHG_CASE(w, , mb_4, al, "memory")
+__CMPXCHG_CASE(x, , mb_8, al, "memory")
#undef __LL_SC_CMPXCHG
#undef __CMPXCHG_CASE
#include <asm/cachetype.h>
-#define L1_CACHE_SHIFT 6
+#define L1_CACHE_SHIFT 7
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/*
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
extern void flush_dcache_page(struct page *);
+static inline void __local_flush_icache_all(void)
+{
+ asm("ic iallu");
+ dsb(nsh);
+ isb();
+}
+
static inline void __flush_icache_all(void)
{
asm("ic ialluis");
#define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK)
-#define ICACHEF_ALIASING BIT(0)
-#define ICACHEF_AIVIVT BIT(1)
+#define ICACHEF_ALIASING 0
+#define ICACHEF_AIVIVT 1
extern unsigned long __icache_flags;
#include <asm/barrier.h>
#include <asm/lse.h>
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
- unsigned long ret, tmp;
-
- switch (size) {
- case 1:
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " prfm pstl1strm, %2\n"
- "1: ldxrb %w0, %2\n"
- " stlxrb %w1, %w3, %2\n"
- " cbnz %w1, 1b\n"
- " dmb ish",
- /* LSE atomics */
- " nop\n"
- " nop\n"
- " swpalb %w3, %w0, %2\n"
- " nop\n"
- " nop")
- : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
- : "r" (x)
- : "memory");
- break;
- case 2:
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " prfm pstl1strm, %2\n"
- "1: ldxrh %w0, %2\n"
- " stlxrh %w1, %w3, %2\n"
- " cbnz %w1, 1b\n"
- " dmb ish",
- /* LSE atomics */
- " nop\n"
- " nop\n"
- " swpalh %w3, %w0, %2\n"
- " nop\n"
- " nop")
- : "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
- : "r" (x)
- : "memory");
- break;
- case 4:
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " prfm pstl1strm, %2\n"
- "1: ldxr %w0, %2\n"
- " stlxr %w1, %w3, %2\n"
- " cbnz %w1, 1b\n"
- " dmb ish",
- /* LSE atomics */
- " nop\n"
- " nop\n"
- " swpal %w3, %w0, %2\n"
- " nop\n"
- " nop")
- : "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
- : "r" (x)
- : "memory");
- break;
- case 8:
- asm volatile(ARM64_LSE_ATOMIC_INSN(
- /* LL/SC */
- " prfm pstl1strm, %2\n"
- "1: ldxr %0, %2\n"
- " stlxr %w1, %3, %2\n"
- " cbnz %w1, 1b\n"
- " dmb ish",
- /* LSE atomics */
- " nop\n"
- " nop\n"
- " swpal %3, %0, %2\n"
- " nop\n"
- " nop")
- : "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
- : "r" (x)
- : "memory");
- break;
- default:
- BUILD_BUG();
- }
-
- return ret;
+/*
+ * We need separate acquire parameters for ll/sc and lse, since the full
+ * barrier case is generated as release+dmb for the former and
+ * acquire+release for the latter.
+ */
+#define __XCHG_CASE(w, sz, name, mb, nop_lse, acq, acq_lse, rel, cl) \
+static inline unsigned long __xchg_case_##name(unsigned long x, \
+ volatile void *ptr) \
+{ \
+ unsigned long ret, tmp; \
+ \
+ asm volatile(ARM64_LSE_ATOMIC_INSN( \
+ /* LL/SC */ \
+ " prfm pstl1strm, %2\n" \
+ "1: ld" #acq "xr" #sz "\t%" #w "0, %2\n" \
+ " st" #rel "xr" #sz "\t%w1, %" #w "3, %2\n" \
+ " cbnz %w1, 1b\n" \
+ " " #mb, \
+ /* LSE atomics */ \
+ " nop\n" \
+ " nop\n" \
+ " swp" #acq_lse #rel #sz "\t%" #w "3, %" #w "0, %2\n" \
+ " nop\n" \
+ " " #nop_lse) \
+ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr) \
+ : "r" (x) \
+ : cl); \
+ \
+ return ret; \
}
-#define xchg(ptr,x) \
-({ \
- __typeof__(*(ptr)) __ret; \
- __ret = (__typeof__(*(ptr))) \
- __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))); \
- __ret; \
+__XCHG_CASE(w, b, 1, , , , , , )
+__XCHG_CASE(w, h, 2, , , , , , )
+__XCHG_CASE(w, , 4, , , , , , )
+__XCHG_CASE( , , 8, , , , , , )
+__XCHG_CASE(w, b, acq_1, , , a, a, , "memory")
+__XCHG_CASE(w, h, acq_2, , , a, a, , "memory")
+__XCHG_CASE(w, , acq_4, , , a, a, , "memory")
+__XCHG_CASE( , , acq_8, , , a, a, , "memory")
+__XCHG_CASE(w, b, rel_1, , , , , l, "memory")
+__XCHG_CASE(w, h, rel_2, , , , , l, "memory")
+__XCHG_CASE(w, , rel_4, , , , , l, "memory")
+__XCHG_CASE( , , rel_8, , , , , l, "memory")
+__XCHG_CASE(w, b, mb_1, dmb ish, nop, , a, l, "memory")
+__XCHG_CASE(w, h, mb_2, dmb ish, nop, , a, l, "memory")
+__XCHG_CASE(w, , mb_4, dmb ish, nop, , a, l, "memory")
+__XCHG_CASE( , , mb_8, dmb ish, nop, , a, l, "memory")
+
+#undef __XCHG_CASE
+
+#define __XCHG_GEN(sfx) \
+static inline unsigned long __xchg##sfx(unsigned long x, \
+ volatile void *ptr, \
+ int size) \
+{ \
+ switch (size) { \
+ case 1: \
+ return __xchg_case##sfx##_1(x, ptr); \
+ case 2: \
+ return __xchg_case##sfx##_2(x, ptr); \
+ case 4: \
+ return __xchg_case##sfx##_4(x, ptr); \
+ case 8: \
+ return __xchg_case##sfx##_8(x, ptr); \
+ default: \
+ BUILD_BUG(); \
+ } \
+ \
+ unreachable(); \
+}
+
+__XCHG_GEN()
+__XCHG_GEN(_acq)
+__XCHG_GEN(_rel)
+__XCHG_GEN(_mb)
+
+#undef __XCHG_GEN
+
+#define __xchg_wrapper(sfx, ptr, x) \
+({ \
+ __typeof__(*(ptr)) __ret; \
+ __ret = (__typeof__(*(ptr))) \
+ __xchg##sfx((unsigned long)(x), (ptr), sizeof(*(ptr))); \
+ __ret; \
})
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 1:
- return __cmpxchg_case_1(ptr, (u8)old, new);
- case 2:
- return __cmpxchg_case_2(ptr, (u16)old, new);
- case 4:
- return __cmpxchg_case_4(ptr, old, new);
- case 8:
- return __cmpxchg_case_8(ptr, old, new);
- default:
- BUILD_BUG();
- }
-
- unreachable();
+/* xchg */
+#define xchg_relaxed(...) __xchg_wrapper( , __VA_ARGS__)
+#define xchg_acquire(...) __xchg_wrapper(_acq, __VA_ARGS__)
+#define xchg_release(...) __xchg_wrapper(_rel, __VA_ARGS__)
+#define xchg(...) __xchg_wrapper( _mb, __VA_ARGS__)
+
+#define __CMPXCHG_GEN(sfx) \
+static inline unsigned long __cmpxchg##sfx(volatile void *ptr, \
+ unsigned long old, \
+ unsigned long new, \
+ int size) \
+{ \
+ switch (size) { \
+ case 1: \
+ return __cmpxchg_case##sfx##_1(ptr, (u8)old, new); \
+ case 2: \
+ return __cmpxchg_case##sfx##_2(ptr, (u16)old, new); \
+ case 4: \
+ return __cmpxchg_case##sfx##_4(ptr, old, new); \
+ case 8: \
+ return __cmpxchg_case##sfx##_8(ptr, old, new); \
+ default: \
+ BUILD_BUG(); \
+ } \
+ \
+ unreachable(); \
}
-static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 1:
- return __cmpxchg_case_mb_1(ptr, (u8)old, new);
- case 2:
- return __cmpxchg_case_mb_2(ptr, (u16)old, new);
- case 4:
- return __cmpxchg_case_mb_4(ptr, old, new);
- case 8:
- return __cmpxchg_case_mb_8(ptr, old, new);
- default:
- BUILD_BUG();
- }
-
- unreachable();
-}
+__CMPXCHG_GEN()
+__CMPXCHG_GEN(_acq)
+__CMPXCHG_GEN(_rel)
+__CMPXCHG_GEN(_mb)
-#define cmpxchg(ptr, o, n) \
-({ \
- __typeof__(*(ptr)) __ret; \
- __ret = (__typeof__(*(ptr))) \
- __cmpxchg_mb((ptr), (unsigned long)(o), (unsigned long)(n), \
- sizeof(*(ptr))); \
- __ret; \
-})
+#undef __CMPXCHG_GEN
-#define cmpxchg_local(ptr, o, n) \
-({ \
- __typeof__(*(ptr)) __ret; \
- __ret = (__typeof__(*(ptr))) \
- __cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))); \
- __ret; \
+#define __cmpxchg_wrapper(sfx, ptr, o, n) \
+({ \
+ __typeof__(*(ptr)) __ret; \
+ __ret = (__typeof__(*(ptr))) \
+ __cmpxchg##sfx((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))); \
+ __ret; \
})
+/* cmpxchg */
+#define cmpxchg_relaxed(...) __cmpxchg_wrapper( , __VA_ARGS__)
+#define cmpxchg_acquire(...) __cmpxchg_wrapper(_acq, __VA_ARGS__)
+#define cmpxchg_release(...) __cmpxchg_wrapper(_rel, __VA_ARGS__)
+#define cmpxchg(...) __cmpxchg_wrapper( _mb, __VA_ARGS__)
+#define cmpxchg_local cmpxchg_relaxed
+
+/* cmpxchg64 */
+#define cmpxchg64_relaxed cmpxchg_relaxed
+#define cmpxchg64_acquire cmpxchg_acquire
+#define cmpxchg64_release cmpxchg_release
+#define cmpxchg64 cmpxchg
+#define cmpxchg64_local cmpxchg_local
+
+/* cmpxchg_double */
#define system_has_cmpxchg_double() 1
#define __cmpxchg_double_check(ptr1, ptr2) \
__ret; \
})
+/* this_cpu_cmpxchg */
#define _protect_cmpxchg_local(pcp, o, n) \
({ \
typeof(*raw_cpu_ptr(&(pcp))) __ret; \
__ret; \
})
-#define cmpxchg64(ptr,o,n) cmpxchg((ptr),(o),(n))
-#define cmpxchg64_local(ptr,o,n) cmpxchg_local((ptr),(o),(n))
-
-#define cmpxchg64_relaxed(ptr,o,n) cmpxchg_local((ptr),(o),(n))
-
#endif /* __ASM_CMPXCHG_H */
void cpuinfo_store_cpu(void);
void __init cpuinfo_store_boot_cpu(void);
+void __init init_cpu_features(struct cpuinfo_arm64 *info);
+void update_cpu_features(int cpu, struct cpuinfo_arm64 *info,
+ struct cpuinfo_arm64 *boot);
+
#endif /* __ASM_CPU_H */
#define __ASM_CPUFEATURE_H
#include <asm/hwcap.h>
+#include <asm/sysreg.h>
/*
* In the arm64 world (as in the ARM world), elf_hwcap is used both internally
#include <linux/kernel.h>
+/* CPU feature register tracking */
+enum ftr_type {
+ FTR_EXACT, /* Use a predefined safe value */
+ FTR_LOWER_SAFE, /* Smaller value is safe */
+ FTR_HIGHER_SAFE,/* Bigger value is safe */
+};
+
+#define FTR_STRICT true /* SANITY check strict matching required */
+#define FTR_NONSTRICT false /* SANITY check ignored */
+
+struct arm64_ftr_bits {
+ bool strict; /* CPU Sanity check: strict matching required ? */
+ enum ftr_type type;
+ u8 shift;
+ u8 width;
+ s64 safe_val; /* safe value for discrete features */
+};
+
+/*
+ * @arm64_ftr_reg - Feature register
+ * @strict_mask Bits which should match across all CPUs for sanity.
+ * @sys_val Safe value across the CPUs (system view)
+ */
+struct arm64_ftr_reg {
+ u32 sys_id;
+ const char *name;
+ u64 strict_mask;
+ u64 sys_val;
+ struct arm64_ftr_bits *ftr_bits;
+};
+
struct arm64_cpu_capabilities {
const char *desc;
u16 capability;
bool (*matches)(const struct arm64_cpu_capabilities *);
- void (*enable)(void);
+ void (*enable)(void *); /* Called on all active CPUs */
union {
struct { /* To be used for erratum handling only */
u32 midr_model;
};
struct { /* Feature register checking */
+ u32 sys_reg;
int field_pos;
int min_field_value;
+ int hwcap_type;
+ unsigned long hwcap;
};
};
};
__set_bit(num, cpu_hwcaps);
}
-static inline int __attribute_const__ cpuid_feature_extract_field(u64 features,
- int field)
+static inline int __attribute_const__
+cpuid_feature_extract_field_width(u64 features, int field, int width)
+{
+ return (s64)(features << (64 - width - field)) >> (64 - width);
+}
+
+static inline int __attribute_const__
+cpuid_feature_extract_field(u64 features, int field)
+{
+ return cpuid_feature_extract_field_width(features, field, 4);
+}
+
+static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
+{
+ return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
+}
+
+static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
+{
+ return cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width);
+}
+
+static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
{
- return (s64)(features << (64 - 4 - field)) >> (64 - 4);
+ return cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 ||
+ cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
}
+void __init setup_cpu_features(void);
-void check_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
+void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
const char *info);
void check_local_cpu_errata(void);
-void check_local_cpu_features(void);
-bool cpu_supports_mixed_endian_el0(void);
-bool system_supports_mixed_endian_el0(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+void verify_local_cpu_capabilities(void);
+#else
+static inline void verify_local_cpu_capabilities(void)
+{
+}
+#endif
+
+u64 read_system_reg(u32 id);
+
+static inline bool cpu_supports_mixed_endian_el0(void)
+{
+ return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
+}
+
+static inline bool system_supports_mixed_endian_el0(void)
+{
+ return id_aa64mmfr0_mixed_endian_el0(read_system_reg(SYS_ID_AA64MMFR0_EL1));
+}
#endif /* __ASSEMBLY__ */
#define APM_CPU_PART_POTENZA 0x000
-#define ID_AA64MMFR0_BIGENDEL0_SHIFT 16
-#define ID_AA64MMFR0_BIGENDEL0_MASK (0xf << ID_AA64MMFR0_BIGENDEL0_SHIFT)
-#define ID_AA64MMFR0_BIGENDEL0(mmfr0) \
- (((mmfr0) & ID_AA64MMFR0_BIGENDEL0_MASK) >> ID_AA64MMFR0_BIGENDEL0_SHIFT)
-#define ID_AA64MMFR0_BIGEND_SHIFT 8
-#define ID_AA64MMFR0_BIGEND_MASK (0xf << ID_AA64MMFR0_BIGEND_SHIFT)
-#define ID_AA64MMFR0_BIGEND(mmfr0) \
- (((mmfr0) & ID_AA64MMFR0_BIGEND_MASK) >> ID_AA64MMFR0_BIGEND_SHIFT)
-
#ifndef __ASSEMBLY__
/*
{
return read_cpuid(CTR_EL0);
}
-
-static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
-{
- return (ID_AA64MMFR0_BIGEND(mmfr0) == 0x1) ||
- (ID_AA64MMFR0_BIGENDEL0(mmfr0) == 0x1);
-}
#endif /* __ASSEMBLY__ */
#endif
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
+#include <linux/sizes.h>
#include <asm/boot.h>
#include <asm/page.h>
* Temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
*/
-#ifdef CONFIG_ARM64_64K_PAGES
-#define NR_FIX_BTMAPS 4
-#else
-#define NR_FIX_BTMAPS 64
-#endif
+#define NR_FIX_BTMAPS (SZ_256K / PAGE_SIZE)
#define FIX_BTMAPS_SLOTS 7
#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
#define __ASM_HW_BREAKPOINT_H
#include <asm/cputype.h>
+#include <asm/cpufeature.h>
#ifdef __KERNEL__
/* Determine number of BRP registers available. */
static inline int get_num_brps(void)
{
- return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
+ return 1 +
+ cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ ID_AA64DFR0_BRPS_SHIFT);
}
/* Determine number of WRP registers available. */
static inline int get_num_wrps(void)
{
- return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
+ return 1 +
+ cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ ID_AA64DFR0_WRPS_SHIFT);
}
#endif /* __KERNEL__ */
extern unsigned int compat_elf_hwcap, compat_elf_hwcap2;
#endif
+enum {
+ CAP_HWCAP = 1,
+#ifdef CONFIG_COMPAT
+ CAP_COMPAT_HWCAP,
+ CAP_COMPAT_HWCAP2,
+#endif
+};
+
extern unsigned long elf_hwcap;
#endif
#endif
struct pt_regs;
-extern void migrate_irqs(void);
extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
static inline void acpi_irq_init(void)
--- /dev/null
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_KASAN
+
+#include <linux/linkage.h>
+#include <asm/memory.h>
+
+/*
+ * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
+ * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/8 of kernel virtual addresses.
+ */
+#define KASAN_SHADOW_START (VA_START)
+#define KASAN_SHADOW_END (KASAN_SHADOW_START + (1UL << (VA_BITS - 3)))
+
+/*
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ * shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
+ *
+ * (1 << 61) shadow addresses - [KASAN_SHADOW_OFFSET,KASAN_SHADOW_END]
+ * cover all 64-bits of virtual addresses. So KASAN_SHADOW_OFFSET
+ * should satisfy the following equation:
+ * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - (1ULL << 61)
+ */
+#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << (64 - 3)))
+
+void kasan_init(void);
+asmlinkage void kasan_early_init(void);
+
+#else
+static inline void kasan_init(void) { }
+#endif
+
+#endif
+#endif
--- /dev/null
+/*
+ * Kernel page table mapping
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_KERNEL_PGTABLE_H
+#define __ASM_KERNEL_PGTABLE_H
+
+
+/*
+ * The linear mapping and the start of memory are both 2M aligned (per
+ * the arm64 booting.txt requirements). Hence we can use section mapping
+ * with 4K (section size = 2M) but not with 16K (section size = 32M) or
+ * 64K (section size = 512M).
+ */
+#ifdef CONFIG_ARM64_4K_PAGES
+#define ARM64_SWAPPER_USES_SECTION_MAPS 1
+#else
+#define ARM64_SWAPPER_USES_SECTION_MAPS 0
+#endif
+
+/*
+ * The idmap and swapper page tables need some space reserved in the kernel
+ * image. Both require pgd, pud (4 levels only) and pmd tables to (section)
+ * map the kernel. With the 64K page configuration, swapper and idmap need to
+ * map to pte level. The swapper also maps the FDT (see __create_page_tables
+ * for more information). Note that the number of ID map translation levels
+ * could be increased on the fly if system RAM is out of reach for the default
+ * VA range, so pages required to map highest possible PA are reserved in all
+ * cases.
+ */
+#if ARM64_SWAPPER_USES_SECTION_MAPS
+#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS - 1)
+#define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT) - 1)
+#else
+#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS)
+#define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT))
+#endif
+
+#define SWAPPER_DIR_SIZE (SWAPPER_PGTABLE_LEVELS * PAGE_SIZE)
+#define IDMAP_DIR_SIZE (IDMAP_PGTABLE_LEVELS * PAGE_SIZE)
+
+/* Initial memory map size */
+#if ARM64_SWAPPER_USES_SECTION_MAPS
+#define SWAPPER_BLOCK_SHIFT SECTION_SHIFT
+#define SWAPPER_BLOCK_SIZE SECTION_SIZE
+#define SWAPPER_TABLE_SHIFT PUD_SHIFT
+#else
+#define SWAPPER_BLOCK_SHIFT PAGE_SHIFT
+#define SWAPPER_BLOCK_SIZE PAGE_SIZE
+#define SWAPPER_TABLE_SHIFT PMD_SHIFT
+#endif
+
+/* The size of the initial kernel direct mapping */
+#define SWAPPER_INIT_MAP_SIZE (_AC(1, UL) << SWAPPER_TABLE_SHIFT)
+
+/*
+ * Initial memory map attributes.
+ */
+#define SWAPPER_PTE_FLAGS (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
+#define SWAPPER_PMD_FLAGS (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
+
+#if ARM64_SWAPPER_USES_SECTION_MAPS
+#define SWAPPER_MM_MMUFLAGS (PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
+#else
+#define SWAPPER_MM_MMUFLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
+#endif
+
+
+#endif /* __ASM_KERNEL_PGTABLE_H */
* PAGE_OFFSET - the virtual address of the start of the kernel image (top
* (VA_BITS - 1))
* VA_BITS - the maximum number of bits for virtual addresses.
+ * VA_START - the first kernel virtual address.
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 128MB of the kernel text.
*/
#define VA_BITS (CONFIG_ARM64_VA_BITS)
+#define VA_START (UL(0xffffffffffffffff) << VA_BITS)
#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS - 1))
#define MODULES_END (PAGE_OFFSET)
#define MODULES_VADDR (MODULES_END - SZ_64M)
#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 4))
-#if TASK_SIZE_64 > MODULES_VADDR
-#error Top of 64-bit user space clashes with start of module space
-#endif
-
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
#define __ASM_MMU_H
typedef struct {
- unsigned int id;
- raw_spinlock_t id_lock;
- void *vdso;
+ atomic64_t id;
+ void *vdso;
} mm_context_t;
-#define INIT_MM_CONTEXT(name) \
- .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock),
-
-#define ASID(mm) ((mm)->context.id & 0xffff)
+/*
+ * This macro is only used by the TLBI code, which cannot race with an
+ * ASID change and therefore doesn't need to reload the counter using
+ * atomic64_read.
+ */
+#define ASID(mm) ((mm)->context.id.counter & 0xffff)
extern void paging_init(void);
extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
#include <asm/cputype.h>
#include <asm/pgtable.h>
-#define MAX_ASID_BITS 16
-
-extern unsigned int cpu_last_asid;
-
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void __new_context(struct mm_struct *mm);
-
#ifdef CONFIG_PID_IN_CONTEXTIDR
static inline void contextidr_thread_switch(struct task_struct *next)
{
unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS)));
}
-static inline void __cpu_set_tcr_t0sz(u64 t0sz)
-{
- unsigned long tcr;
-
- if (__cpu_uses_extended_idmap())
- asm volatile (
- " mrs %0, tcr_el1 ;"
- " bfi %0, %1, %2, %3 ;"
- " msr tcr_el1, %0 ;"
- " isb"
- : "=&r" (tcr)
- : "r"(t0sz), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
-}
-
-/*
- * Set TCR.T0SZ to the value appropriate for activating the identity map.
- */
-static inline void cpu_set_idmap_tcr_t0sz(void)
-{
- __cpu_set_tcr_t0sz(idmap_t0sz);
-}
-
/*
* Set TCR.T0SZ to its default value (based on VA_BITS)
*/
static inline void cpu_set_default_tcr_t0sz(void)
{
- __cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS));
-}
-
-static inline void switch_new_context(struct mm_struct *mm)
-{
- unsigned long flags;
-
- __new_context(mm);
+ unsigned long tcr;
- local_irq_save(flags);
- cpu_switch_mm(mm->pgd, mm);
- local_irq_restore(flags);
-}
+ if (!__cpu_uses_extended_idmap())
+ return;
-static inline void check_and_switch_context(struct mm_struct *mm,
- struct task_struct *tsk)
-{
- /*
- * Required during context switch to avoid speculative page table
- * walking with the wrong TTBR.
- */
- cpu_set_reserved_ttbr0();
-
- if (!((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS))
- /*
- * The ASID is from the current generation, just switch to the
- * new pgd. This condition is only true for calls from
- * context_switch() and interrupts are already disabled.
- */
- cpu_switch_mm(mm->pgd, mm);
- else if (irqs_disabled())
- /*
- * Defer the new ASID allocation until after the context
- * switch critical region since __new_context() cannot be
- * called with interrupts disabled.
- */
- set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
- else
- /*
- * That is a direct call to switch_mm() or activate_mm() with
- * interrupts enabled and a new context.
- */
- switch_new_context(mm);
+ asm volatile (
+ " mrs %0, tcr_el1 ;"
+ " bfi %0, %1, %2, %3 ;"
+ " msr tcr_el1, %0 ;"
+ " isb"
+ : "=&r" (tcr)
+ : "r"(TCR_T0SZ(VA_BITS)), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
}
-#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0)
+/*
+ * It would be nice to return ASIDs back to the allocator, but unfortunately
+ * that introduces a race with a generation rollover where we could erroneously
+ * free an ASID allocated in a future generation. We could workaround this by
+ * freeing the ASID from the context of the dying mm (e.g. in arch_exit_mmap),
+ * but we'd then need to make sure that we didn't dirty any TLBs afterwards.
+ * Setting a reserved TTBR0 or EPD0 would work, but it all gets ugly when you
+ * take CPU migration into account.
+ */
#define destroy_context(mm) do { } while(0)
+void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
-#define finish_arch_post_lock_switch \
- finish_arch_post_lock_switch
-static inline void finish_arch_post_lock_switch(void)
-{
- if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
- struct mm_struct *mm = current->mm;
- unsigned long flags;
-
- __new_context(mm);
-
- local_irq_save(flags);
- cpu_switch_mm(mm->pgd, mm);
- local_irq_restore(flags);
- }
-}
+#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.
{
unsigned int cpu = smp_processor_id();
+ if (prev == next)
+ return;
+
/*
* init_mm.pgd does not contain any user mappings and it is always
* active for kernel addresses in TTBR1. Just set the reserved TTBR0.
return;
}
- if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
- check_and_switch_context(next, tsk);
+ check_and_switch_context(next, cpu);
}
#define deactivate_mm(tsk,mm) do { } while (0)
#define __ASM_PAGE_H
/* PAGE_SHIFT determines the page size */
+/* CONT_SHIFT determines the number of pages which can be tracked together */
#ifdef CONFIG_ARM64_64K_PAGES
#define PAGE_SHIFT 16
+#define CONT_SHIFT 5
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define PAGE_SHIFT 14
+#define CONT_SHIFT 7
#else
#define PAGE_SHIFT 12
+#define CONT_SHIFT 4
#endif
-#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
-/*
- * The idmap and swapper page tables need some space reserved in the kernel
- * image. Both require pgd, pud (4 levels only) and pmd tables to (section)
- * map the kernel. With the 64K page configuration, swapper and idmap need to
- * map to pte level. The swapper also maps the FDT (see __create_page_tables
- * for more information). Note that the number of ID map translation levels
- * could be increased on the fly if system RAM is out of reach for the default
- * VA range, so 3 pages are reserved in all cases.
- */
-#ifdef CONFIG_ARM64_64K_PAGES
-#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS)
-#else
-#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS - 1)
-#endif
-
-#define SWAPPER_DIR_SIZE (SWAPPER_PGTABLE_LEVELS * PAGE_SIZE)
-#define IDMAP_DIR_SIZE (3 * PAGE_SIZE)
+#define CONT_SIZE (_AC(1, UL) << (CONT_SHIFT + PAGE_SHIFT))
+#define CONT_MASK (~(CONT_SIZE-1))
#ifndef __ASSEMBLY__
#define check_pgt_cache() do { } while (0)
#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
#if CONFIG_PGTABLE_LEVELS > 2
#ifndef __ASM_PGTABLE_HWDEF_H
#define __ASM_PGTABLE_HWDEF_H
+/*
+ * Number of page-table levels required to address 'va_bits' wide
+ * address, without section mapping. We resolve the top (va_bits - PAGE_SHIFT)
+ * bits with (PAGE_SHIFT - 3) bits at each page table level. Hence:
+ *
+ * levels = DIV_ROUND_UP((va_bits - PAGE_SHIFT), (PAGE_SHIFT - 3))
+ *
+ * where DIV_ROUND_UP(n, d) => (((n) + (d) - 1) / (d))
+ *
+ * We cannot include linux/kernel.h which defines DIV_ROUND_UP here
+ * due to build issues. So we open code DIV_ROUND_UP here:
+ *
+ * ((((va_bits) - PAGE_SHIFT) + (PAGE_SHIFT - 3) - 1) / (PAGE_SHIFT - 3))
+ *
+ * which gets simplified as :
+ */
+#define ARM64_HW_PGTABLE_LEVELS(va_bits) (((va_bits) - 4) / (PAGE_SHIFT - 3))
+
+/*
+ * Size mapped by an entry at level n ( 0 <= n <= 3)
+ * We map (PAGE_SHIFT - 3) at all translation levels and PAGE_SHIFT bits
+ * in the final page. The maximum number of translation levels supported by
+ * the architecture is 4. Hence, starting at at level n, we have further
+ * ((4 - n) - 1) levels of translation excluding the offset within the page.
+ * So, the total number of bits mapped by an entry at level n is :
+ *
+ * ((4 - n) - 1) * (PAGE_SHIFT - 3) + PAGE_SHIFT
+ *
+ * Rearranging it a bit we get :
+ * (4 - n) * (PAGE_SHIFT - 3) + 3
+ */
+#define ARM64_HW_PGTABLE_LEVEL_SHIFT(n) ((PAGE_SHIFT - 3) * (4 - (n)) + 3)
+
#define PTRS_PER_PTE (1 << (PAGE_SHIFT - 3))
/*
* PMD_SHIFT determines the size a level 2 page table entry can map.
*/
#if CONFIG_PGTABLE_LEVELS > 2
-#define PMD_SHIFT ((PAGE_SHIFT - 3) * 2 + 3)
+#define PMD_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(2)
#define PMD_SIZE (_AC(1, UL) << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PTRS_PER_PMD PTRS_PER_PTE
* PUD_SHIFT determines the size a level 1 page table entry can map.
*/
#if CONFIG_PGTABLE_LEVELS > 3
-#define PUD_SHIFT ((PAGE_SHIFT - 3) * 3 + 3)
+#define PUD_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(1)
#define PUD_SIZE (_AC(1, UL) << PUD_SHIFT)
#define PUD_MASK (~(PUD_SIZE-1))
#define PTRS_PER_PUD PTRS_PER_PTE
* PGDIR_SHIFT determines the size a top-level page table entry can map
* (depending on the configuration, this level can be 0, 1 or 2).
*/
-#define PGDIR_SHIFT ((PAGE_SHIFT - 3) * CONFIG_PGTABLE_LEVELS + 3)
+#define PGDIR_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - CONFIG_PGTABLE_LEVELS)
#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD (1 << (VA_BITS - PGDIR_SHIFT))
#define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT)
#define SECTION_MASK (~(SECTION_SIZE-1))
+/*
+ * Contiguous page definitions.
+ */
+#define CONT_PTES (_AC(1, UL) << CONT_SHIFT)
+/* the the numerical offset of the PTE within a range of CONT_PTES */
+#define CONT_RANGE_OFFSET(addr) (((addr)>>PAGE_SHIFT)&(CONT_PTES-1))
+
/*
* Hardware page table definitions.
*
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_NG (_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_CONT (_AT(pmdval_t, 1) << 52)
#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53)
#define PMD_SECT_UXN (_AT(pmdval_t, 1) << 54)
#define PTE_AF (_AT(pteval_t, 1) << 10) /* Access Flag */
#define PTE_NG (_AT(pteval_t, 1) << 11) /* nG */
#define PTE_DBM (_AT(pteval_t, 1) << 51) /* Dirty Bit Management */
+#define PTE_CONT (_AT(pteval_t, 1) << 52) /* Contiguous range */
#define PTE_PXN (_AT(pteval_t, 1) << 53) /* Privileged XN */
#define PTE_UXN (_AT(pteval_t, 1) << 54) /* User XN */
* fixed mappings and modules
*/
#define VMEMMAP_SIZE ALIGN((1UL << (VA_BITS - PAGE_SHIFT)) * sizeof(struct page), PUD_SIZE)
-#define VMALLOC_START (UL(0xffffffffffffffff) << VA_BITS)
+
+#ifndef CONFIG_KASAN
+#define VMALLOC_START (VA_START)
+#else
+#include <asm/kasan.h>
+#define VMALLOC_START (KASAN_SHADOW_END + SZ_64K)
+#endif
+
#define VMALLOC_END (PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
#define vmemmap ((struct page *)(VMALLOC_END + SZ_64K))
#define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
#define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
+#define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)
#define PAGE_HYP __pgprot(_PAGE_DEFAULT | PTE_HYP)
#define PAGE_HYP_DEVICE __pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
#define pte_special(pte) (!!(pte_val(pte) & PTE_SPECIAL))
#define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE))
#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
+#define pte_cont(pte) (!!(pte_val(pte) & PTE_CONT))
#ifdef CONFIG_ARM64_HW_AFDBM
#define pte_hw_dirty(pte) (pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
return set_pte_bit(pte, __pgprot(PTE_SPECIAL));
}
+static inline pte_t pte_mkcont(pte_t pte)
+{
+ return set_pte_bit(pte, __pgprot(PTE_CONT));
+}
+
+static inline pte_t pte_mknoncont(pte_t pte)
+{
+ return clear_pte_bit(pte, __pgprot(PTE_CONT));
+}
+
static inline void set_pte(pte_t *ptep, pte_t pte)
{
*ptep = pte;
unsigned long addr, pte_t *ptep)
{
/*
- * set_pte() does not have a DSB for user mappings, so make sure that
- * the page table write is visible.
+ * We don't do anything here, so there's a very small chance of
+ * us retaking a user fault which we just fixed up. The alternative
+ * is doing a dsb(ishst), but that penalises the fastpath.
*/
- dsb(ishst);
}
#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
+#define kc_vaddr_to_offset(v) ((v) & ~VA_START)
+#define kc_offset_to_vaddr(o) ((o) | VA_START)
+
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_PGTABLE_H */
+++ /dev/null
-/*
- * Based on arch/arm/include/asm/pmu.h
- *
- * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- * Copyright (C) 2012 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __ASM_PMU_H
-#define __ASM_PMU_H
-
-#ifdef CONFIG_HW_PERF_EVENTS
-
-/* The events for a given PMU register set. */
-struct pmu_hw_events {
- /*
- * The events that are active on the PMU for the given index.
- */
- struct perf_event **events;
-
- /*
- * A 1 bit for an index indicates that the counter is being used for
- * an event. A 0 means that the counter can be used.
- */
- unsigned long *used_mask;
-
- /*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
- raw_spinlock_t pmu_lock;
-};
-
-struct arm_pmu {
- struct pmu pmu;
- cpumask_t active_irqs;
- int *irq_affinity;
- const char *name;
- irqreturn_t (*handle_irq)(int irq_num, void *dev);
- void (*enable)(struct hw_perf_event *evt, int idx);
- void (*disable)(struct hw_perf_event *evt, int idx);
- int (*get_event_idx)(struct pmu_hw_events *hw_events,
- struct hw_perf_event *hwc);
- int (*set_event_filter)(struct hw_perf_event *evt,
- struct perf_event_attr *attr);
- u32 (*read_counter)(int idx);
- void (*write_counter)(int idx, u32 val);
- void (*start)(void);
- void (*stop)(void);
- void (*reset)(void *);
- int (*map_event)(struct perf_event *event);
- int num_events;
- atomic_t active_events;
- struct mutex reserve_mutex;
- u64 max_period;
- struct platform_device *plat_device;
- struct pmu_hw_events *(*get_hw_events)(void);
-};
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
-
-u64 armpmu_event_update(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx);
-
-int armpmu_event_set_period(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx);
-
-#endif /* CONFIG_HW_PERF_EVENTS */
-#endif /* __ASM_PMU_H */
#endif
-void cpu_enable_pan(void);
+void cpu_enable_pan(void *__unused);
#endif /* __ASM_PROCESSOR_H */
#define compat_sp regs[13]
#define compat_lr regs[14]
#define compat_sp_hyp regs[15]
-#define compat_sp_irq regs[16]
-#define compat_lr_irq regs[17]
-#define compat_sp_svc regs[18]
-#define compat_lr_svc regs[19]
-#define compat_sp_abt regs[20]
-#define compat_lr_abt regs[21]
-#define compat_sp_und regs[22]
-#define compat_lr_und regs[23]
+#define compat_lr_irq regs[16]
+#define compat_sp_irq regs[17]
+#define compat_lr_svc regs[18]
+#define compat_sp_svc regs[19]
+#define compat_lr_abt regs[20]
+#define compat_sp_abt regs[21]
+#define compat_lr_und regs[22]
+#define compat_sp_und regs[23]
#define compat_r8_fiq regs[24]
#define compat_r9_fiq regs[25]
#define compat_r10_fiq regs[26]
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
#define __HAVE_ARCH_MEMCHR
extern void *memchr(const void *, int, __kernel_size_t);
#define __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
+extern void *__memset(void *, int, __kernel_size_t);
#define __HAVE_ARCH_MEMCMP
extern int memcmp(const void *, const void *, size_t);
+
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+
+/*
+ * For files that are not instrumented (e.g. mm/slub.c) we
+ * should use not instrumented version of mem* functions.
+ */
+
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+#endif
+
#endif
#include <asm/opcodes.h>
-#define SCTLR_EL1_CP15BEN (0x1 << 5)
-#define SCTLR_EL1_SED (0x1 << 8)
-
/*
* ARMv8 ARM reserves the following encoding for system registers:
* (Ref: ARMv8 ARM, Section: "System instruction class encoding overview",
#define sys_reg(op0, op1, crn, crm, op2) \
((((op0)&3)<<19)|((op1)<<16)|((crn)<<12)|((crm)<<8)|((op2)<<5))
-#define REG_PSTATE_PAN_IMM sys_reg(0, 0, 4, 0, 4)
-#define SCTLR_EL1_SPAN (1 << 23)
+#define SYS_MIDR_EL1 sys_reg(3, 0, 0, 0, 0)
+#define SYS_MPIDR_EL1 sys_reg(3, 0, 0, 0, 5)
+#define SYS_REVIDR_EL1 sys_reg(3, 0, 0, 0, 6)
+
+#define SYS_ID_PFR0_EL1 sys_reg(3, 0, 0, 1, 0)
+#define SYS_ID_PFR1_EL1 sys_reg(3, 0, 0, 1, 1)
+#define SYS_ID_DFR0_EL1 sys_reg(3, 0, 0, 1, 2)
+#define SYS_ID_MMFR0_EL1 sys_reg(3, 0, 0, 1, 4)
+#define SYS_ID_MMFR1_EL1 sys_reg(3, 0, 0, 1, 5)
+#define SYS_ID_MMFR2_EL1 sys_reg(3, 0, 0, 1, 6)
+#define SYS_ID_MMFR3_EL1 sys_reg(3, 0, 0, 1, 7)
+
+#define SYS_ID_ISAR0_EL1 sys_reg(3, 0, 0, 2, 0)
+#define SYS_ID_ISAR1_EL1 sys_reg(3, 0, 0, 2, 1)
+#define SYS_ID_ISAR2_EL1 sys_reg(3, 0, 0, 2, 2)
+#define SYS_ID_ISAR3_EL1 sys_reg(3, 0, 0, 2, 3)
+#define SYS_ID_ISAR4_EL1 sys_reg(3, 0, 0, 2, 4)
+#define SYS_ID_ISAR5_EL1 sys_reg(3, 0, 0, 2, 5)
+#define SYS_ID_MMFR4_EL1 sys_reg(3, 0, 0, 2, 6)
+
+#define SYS_MVFR0_EL1 sys_reg(3, 0, 0, 3, 0)
+#define SYS_MVFR1_EL1 sys_reg(3, 0, 0, 3, 1)
+#define SYS_MVFR2_EL1 sys_reg(3, 0, 0, 3, 2)
+
+#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0)
+#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1)
+
+#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
+#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
+
+#define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
+#define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
+
+#define SYS_ID_AA64MMFR0_EL1 sys_reg(3, 0, 0, 7, 0)
+#define SYS_ID_AA64MMFR1_EL1 sys_reg(3, 0, 0, 7, 1)
+
+#define SYS_CNTFRQ_EL0 sys_reg(3, 3, 14, 0, 0)
+#define SYS_CTR_EL0 sys_reg(3, 3, 0, 0, 1)
+#define SYS_DCZID_EL0 sys_reg(3, 3, 0, 0, 7)
+
+#define REG_PSTATE_PAN_IMM sys_reg(0, 0, 4, 0, 4)
#define SET_PSTATE_PAN(x) __inst_arm(0xd5000000 | REG_PSTATE_PAN_IMM |\
(!!x)<<8 | 0x1f)
+/* SCTLR_EL1 */
+#define SCTLR_EL1_CP15BEN (0x1 << 5)
+#define SCTLR_EL1_SED (0x1 << 8)
+#define SCTLR_EL1_SPAN (0x1 << 23)
+
+
+/* id_aa64isar0 */
+#define ID_AA64ISAR0_RDM_SHIFT 28
+#define ID_AA64ISAR0_ATOMICS_SHIFT 20
+#define ID_AA64ISAR0_CRC32_SHIFT 16
+#define ID_AA64ISAR0_SHA2_SHIFT 12
+#define ID_AA64ISAR0_SHA1_SHIFT 8
+#define ID_AA64ISAR0_AES_SHIFT 4
+
+/* id_aa64pfr0 */
+#define ID_AA64PFR0_GIC_SHIFT 24
+#define ID_AA64PFR0_ASIMD_SHIFT 20
+#define ID_AA64PFR0_FP_SHIFT 16
+#define ID_AA64PFR0_EL3_SHIFT 12
+#define ID_AA64PFR0_EL2_SHIFT 8
+#define ID_AA64PFR0_EL1_SHIFT 4
+#define ID_AA64PFR0_EL0_SHIFT 0
+
+#define ID_AA64PFR0_FP_NI 0xf
+#define ID_AA64PFR0_FP_SUPPORTED 0x0
+#define ID_AA64PFR0_ASIMD_NI 0xf
+#define ID_AA64PFR0_ASIMD_SUPPORTED 0x0
+#define ID_AA64PFR0_EL1_64BIT_ONLY 0x1
+#define ID_AA64PFR0_EL0_64BIT_ONLY 0x1
+
+/* id_aa64mmfr0 */
+#define ID_AA64MMFR0_TGRAN4_SHIFT 28
+#define ID_AA64MMFR0_TGRAN64_SHIFT 24
+#define ID_AA64MMFR0_TGRAN16_SHIFT 20
+#define ID_AA64MMFR0_BIGENDEL0_SHIFT 16
+#define ID_AA64MMFR0_SNSMEM_SHIFT 12
+#define ID_AA64MMFR0_BIGENDEL_SHIFT 8
+#define ID_AA64MMFR0_ASID_SHIFT 4
+#define ID_AA64MMFR0_PARANGE_SHIFT 0
+
+#define ID_AA64MMFR0_TGRAN4_NI 0xf
+#define ID_AA64MMFR0_TGRAN4_SUPPORTED 0x0
+#define ID_AA64MMFR0_TGRAN64_NI 0xf
+#define ID_AA64MMFR0_TGRAN64_SUPPORTED 0x0
+#define ID_AA64MMFR0_TGRAN16_NI 0x0
+#define ID_AA64MMFR0_TGRAN16_SUPPORTED 0x1
+
+/* id_aa64mmfr1 */
+#define ID_AA64MMFR1_PAN_SHIFT 20
+#define ID_AA64MMFR1_LOR_SHIFT 16
+#define ID_AA64MMFR1_HPD_SHIFT 12
+#define ID_AA64MMFR1_VHE_SHIFT 8
+#define ID_AA64MMFR1_VMIDBITS_SHIFT 4
+#define ID_AA64MMFR1_HADBS_SHIFT 0
+
+/* id_aa64dfr0 */
+#define ID_AA64DFR0_CTX_CMPS_SHIFT 28
+#define ID_AA64DFR0_WRPS_SHIFT 20
+#define ID_AA64DFR0_BRPS_SHIFT 12
+#define ID_AA64DFR0_PMUVER_SHIFT 8
+#define ID_AA64DFR0_TRACEVER_SHIFT 4
+#define ID_AA64DFR0_DEBUGVER_SHIFT 0
+
+#define ID_ISAR5_RDM_SHIFT 24
+#define ID_ISAR5_CRC32_SHIFT 16
+#define ID_ISAR5_SHA2_SHIFT 12
+#define ID_ISAR5_SHA1_SHIFT 8
+#define ID_ISAR5_AES_SHIFT 4
+#define ID_ISAR5_SEVL_SHIFT 0
+
+#define MVFR0_FPROUND_SHIFT 28
+#define MVFR0_FPSHVEC_SHIFT 24
+#define MVFR0_FPSQRT_SHIFT 20
+#define MVFR0_FPDIVIDE_SHIFT 16
+#define MVFR0_FPTRAP_SHIFT 12
+#define MVFR0_FPDP_SHIFT 8
+#define MVFR0_FPSP_SHIFT 4
+#define MVFR0_SIMD_SHIFT 0
+
+#define MVFR1_SIMDFMAC_SHIFT 28
+#define MVFR1_FPHP_SHIFT 24
+#define MVFR1_SIMDHP_SHIFT 20
+#define MVFR1_SIMDSP_SHIFT 16
+#define MVFR1_SIMDINT_SHIFT 12
+#define MVFR1_SIMDLS_SHIFT 8
+#define MVFR1_FPDNAN_SHIFT 4
+#define MVFR1_FPFTZ_SHIFT 0
+
+
+#define ID_AA64MMFR0_TGRAN4_SHIFT 28
+#define ID_AA64MMFR0_TGRAN64_SHIFT 24
+#define ID_AA64MMFR0_TGRAN16_SHIFT 20
+
+#define ID_AA64MMFR0_TGRAN4_NI 0xf
+#define ID_AA64MMFR0_TGRAN4_SUPPORTED 0x0
+#define ID_AA64MMFR0_TGRAN64_NI 0xf
+#define ID_AA64MMFR0_TGRAN64_SUPPORTED 0x0
+#define ID_AA64MMFR0_TGRAN16_NI 0x0
+#define ID_AA64MMFR0_TGRAN16_SUPPORTED 0x1
+
+#if defined(CONFIG_ARM64_4K_PAGES)
+#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT
+#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN4_SUPPORTED
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT
+#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN16_SUPPORTED
+#elif defined(CONFIG_ARM64_64K_PAGES)
+#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT
+#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN64_SUPPORTED
+#endif
+
#ifdef __ASSEMBLY__
.irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
#include <linux/compiler.h>
-#ifndef CONFIG_ARM64_64K_PAGES
+#ifdef CONFIG_ARM64_4K_PAGES
#define THREAD_SIZE_ORDER 2
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define THREAD_SIZE_ORDER 0
#endif
#define THREAD_SIZE 16384
#define TIF_RESTORE_SIGMASK 20
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
-#define TIF_SWITCH_MM 23 /* deferred switch_mm */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
static inline void tlb_flush(struct mmu_gather *tlb)
{
- if (tlb->fullmm) {
- flush_tlb_mm(tlb->mm);
- } else {
- struct vm_area_struct vma = { .vm_mm = tlb->mm, };
- /*
- * The intermediate page table levels are already handled by
- * the __(pte|pmd|pud)_free_tlb() functions, so last level
- * TLBI is sufficient here.
- */
- __flush_tlb_range(&vma, tlb->start, tlb->end, true);
- }
+ struct vm_area_struct vma = { .vm_mm = tlb->mm, };
+
+ /*
+ * The ASID allocator will either invalidate the ASID or mark
+ * it as used.
+ */
+ if (tlb->fullmm)
+ return;
+
+ /*
+ * The intermediate page table levels are already handled by
+ * the __(pte|pmd|pud)_free_tlb() functions, so last level
+ * TLBI is sufficient here.
+ */
+ __flush_tlb_range(&vma, tlb->start, tlb->end, true);
}
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
* only require the D-TLB to be invalidated.
* - kaddr - Kernel virtual memory address
*/
+static inline void local_flush_tlb_all(void)
+{
+ dsb(nshst);
+ asm("tlbi vmalle1");
+ dsb(nsh);
+ isb();
+}
+
static inline void flush_tlb_all(void)
{
dsb(ishst);
static inline void flush_tlb_mm(struct mm_struct *mm)
{
- unsigned long asid = (unsigned long)ASID(mm) << 48;
+ unsigned long asid = ASID(mm) << 48;
dsb(ishst);
asm("tlbi aside1is, %0" : : "r" (asid));
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long uaddr)
{
- unsigned long addr = uaddr >> 12 |
- ((unsigned long)ASID(vma->vm_mm) << 48);
+ unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48);
dsb(ishst);
asm("tlbi vale1is, %0" : : "r" (addr));
unsigned long start, unsigned long end,
bool last_level)
{
- unsigned long asid = (unsigned long)ASID(vma->vm_mm) << 48;
+ unsigned long asid = ASID(vma->vm_mm) << 48;
unsigned long addr;
if ((end - start) > MAX_TLB_RANGE) {
static inline void __flush_tlb_pgtable(struct mm_struct *mm,
unsigned long uaddr)
{
- unsigned long addr = uaddr >> 12 | ((unsigned long)ASID(mm) << 48);
+ unsigned long addr = uaddr >> 12 | (ASID(mm) << 48);
- dsb(ishst);
asm("tlbi vae1is, %0" : : "r" (addr));
dsb(ish);
}
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
-#define __NR_compat_syscalls 388
+#define __NR_compat_syscalls 390
#endif
#define __ARCH_WANT_SYS_CLONE
__SYSCALL(__NR_bpf, sys_bpf)
#define __NR_execveat 387
__SYSCALL(__NR_execveat, compat_sys_execveat)
+#define __NR_userfaultfd 388
+__SYSCALL(__NR_userfaultfd, sys_userfaultfd)
+#define __NR_membarrier 389
+__SYSCALL(__NR_membarrier, sys_membarrier)
+
+/*
+ * Please add new compat syscalls above this comment and update
+ * __NR_compat_syscalls in asm/unistd.h.
+ */
/* Required for AArch32 compatibility. */
#define SA_RESTORER 0x04000000
+#define MINSIGSTKSZ 5120
+#define SIGSTKSZ 16384
+
#include <asm-generic/signal.h>
#endif
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
-CFLAGS_efi-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_armv8_deprecated.o := -I$(src)
CFLAGS_REMOVE_ftrace.o = -pg
cpufeature.o alternative.o cacheinfo.o \
smp.o smp_spin_table.o topology.o
+extra-$(CONFIG_EFI) := efi-entry.o
+
+OBJCOPYFLAGS := --prefix-symbols=__efistub_
+$(obj)/%.stub.o: $(obj)/%.o FORCE
+ $(call if_changed,objcopy)
+
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o \
../../arm/kernel/opcodes.o
arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
-arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
+arm64-obj-$(CONFIG_EFI) += efi.o efi-entry.stub.o
arm64-obj-$(CONFIG_PCI) += pci.o
arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
arm64-obj-$(CONFIG_ACPI) += acpi.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
head-y := head.o
-extra-y := $(head-y) vmlinux.lds
+extra-y += $(head-y) vmlinux.lds
# vDSO - this must be built first to generate the symbol offsets
$(call objectify,$(arm64-obj-y)): $(obj)/vdso/vdso-offsets.h
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(__memcpy);
+EXPORT_SYMBOL(__memmove);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcmp);
__asm__ __volatile__( \
ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN) \
- " mov %w2, %w1\n" \
- "0: ldxr"B" %w1, [%3]\n" \
- "1: stxr"B" %w0, %w2, [%3]\n" \
+ "0: ldxr"B" %w2, [%3]\n" \
+ "1: stxr"B" %w0, %w1, [%3]\n" \
" cbz %w0, 2f\n" \
" mov %w0, %w4\n" \
+ " b 3f\n" \
"2:\n" \
+ " mov %w1, %w2\n" \
+ "3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
- "3: mov %w0, %w5\n" \
- " b 2b\n" \
+ "4: mov %w0, %w5\n" \
+ " b 3b\n" \
" .popsection" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
- " .quad 0b, 3b\n" \
- " .quad 1b, 3b\n" \
+ " .quad 0b, 4b\n" \
+ " .quad 1b, 4b\n" \
" .popsection\n" \
ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN) \
DEFINE(S_SYSCALLNO, offsetof(struct pt_regs, syscallno));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
- DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id));
+ DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter));
BLANK();
DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
void check_local_cpu_errata(void)
{
- check_cpu_capabilities(arm64_errata, "enabling workaround for");
+ update_cpu_capabilities(arm64_errata, "enabling workaround for");
}
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#define pr_fmt(fmt) "alternatives: " fmt
+#define pr_fmt(fmt) "CPU features: " fmt
+#include <linux/bsearch.h>
+#include <linux/sort.h>
#include <linux/types.h>
#include <asm/cpu.h>
#include <asm/cpufeature.h>
+#include <asm/cpu_ops.h>
#include <asm/processor.h>
+#include <asm/sysreg.h>
+
+unsigned long elf_hwcap __read_mostly;
+EXPORT_SYMBOL_GPL(elf_hwcap);
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_ELF_HWCAP_DEFAULT \
+ (COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
+ COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
+ COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
+ COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
+ COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\
+ COMPAT_HWCAP_LPAE)
+unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
+unsigned int compat_elf_hwcap2 __read_mostly;
+#endif
+
+DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
+
+#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+ { \
+ .strict = STRICT, \
+ .type = TYPE, \
+ .shift = SHIFT, \
+ .width = WIDTH, \
+ .safe_val = SAFE_VAL, \
+ }
+
+#define ARM64_FTR_END \
+ { \
+ .width = 0, \
+ }
+
+static struct arm64_ftr_bits ftr_id_aa64isar0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64ISAR0_RDM_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_ATOMICS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_CRC32_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_SHA2_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_SHA1_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_AES_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* RAZ */
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_GIC_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
+ /* Linux doesn't care about the EL3 */
+ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, ID_AA64PFR0_EL3_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_EL2_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0),
+ /* Linux shouldn't care about secure memory */
+ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_SNSMEM_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_BIGENDEL_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_ASID_SHIFT, 4, 0),
+ /*
+ * Differing PARange is fine as long as all peripherals and memory are mapped
+ * within the minimum PARange of all CPUs
+ */
+ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_PAN_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_LOR_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_HPD_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_VHE_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_VMIDBITS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_HADBS_SHIFT, 4, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_ctr[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
+ /*
+ * Linux can handle differing I-cache policies. Userspace JITs will
+ * make use of *minLine
+ */
+ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 10, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_mmfr0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0), /* InnerShr */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0), /* FCSE */
+ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, 20, 4, 0), /* AuxReg */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 16, 4, 0), /* TCM */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 12, 4, 0), /* ShareLvl */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0), /* OuterShr */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* PMSA */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* VMSA */
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_mvfr2[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* FPMisc */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* SIMDMisc */
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_dczid[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 5, 27, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 1, 1), /* DZP */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* BS */
+ ARM64_FTR_END,
+};
+
+
+static struct arm64_ftr_bits ftr_id_isar5[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_RDM_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 20, 4, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_CRC32_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_SHA2_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_SHA1_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_AES_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_SEVL_SHIFT, 4, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_mmfr4[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* ac2 */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* RAZ */
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_id_pfr0[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 16, 16, 0), /* RAZ */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 12, 4, 0), /* State3 */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0), /* State2 */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* State1 */
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* State0 */
+ ARM64_FTR_END,
+};
+
+/*
+ * Common ftr bits for a 32bit register with all hidden, strict
+ * attributes, with 4bit feature fields and a default safe value of
+ * 0. Covers the following 32bit registers:
+ * id_isar[0-4], id_mmfr[1-3], id_pfr1, mvfr[0-1]
+ */
+static struct arm64_ftr_bits ftr_generic_32bits[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),
+ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_generic[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_generic32[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 32, 0),
+ ARM64_FTR_END,
+};
+
+static struct arm64_ftr_bits ftr_aa64raz[] = {
+ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0),
+ ARM64_FTR_END,
+};
+
+#define ARM64_FTR_REG(id, table) \
+ { \
+ .sys_id = id, \
+ .name = #id, \
+ .ftr_bits = &((table)[0]), \
+ }
+
+static struct arm64_ftr_reg arm64_ftr_regs[] = {
+
+ /* Op1 = 0, CRn = 0, CRm = 1 */
+ ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0),
+ ARM64_FTR_REG(SYS_ID_PFR1_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_DFR0_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_MMFR0_EL1, ftr_id_mmfr0),
+ ARM64_FTR_REG(SYS_ID_MMFR1_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_MMFR2_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_MMFR3_EL1, ftr_generic_32bits),
+
+ /* Op1 = 0, CRn = 0, CRm = 2 */
+ ARM64_FTR_REG(SYS_ID_ISAR0_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_ISAR1_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_ISAR2_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_ISAR3_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_ISAR4_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_ID_ISAR5_EL1, ftr_id_isar5),
+ ARM64_FTR_REG(SYS_ID_MMFR4_EL1, ftr_id_mmfr4),
+
+ /* Op1 = 0, CRn = 0, CRm = 3 */
+ ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_generic_32bits),
+ ARM64_FTR_REG(SYS_MVFR2_EL1, ftr_mvfr2),
+
+ /* Op1 = 0, CRn = 0, CRm = 4 */
+ ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0),
+ ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_aa64raz),
+
+ /* Op1 = 0, CRn = 0, CRm = 5 */
+ ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
+ ARM64_FTR_REG(SYS_ID_AA64DFR1_EL1, ftr_generic),
+
+ /* Op1 = 0, CRn = 0, CRm = 6 */
+ ARM64_FTR_REG(SYS_ID_AA64ISAR0_EL1, ftr_id_aa64isar0),
+ ARM64_FTR_REG(SYS_ID_AA64ISAR1_EL1, ftr_aa64raz),
+
+ /* Op1 = 0, CRn = 0, CRm = 7 */
+ ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
+ ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1),
+
+ /* Op1 = 3, CRn = 0, CRm = 0 */
+ ARM64_FTR_REG(SYS_CTR_EL0, ftr_ctr),
+ ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
+
+ /* Op1 = 3, CRn = 14, CRm = 0 */
+ ARM64_FTR_REG(SYS_CNTFRQ_EL0, ftr_generic32),
+};
+
+static int search_cmp_ftr_reg(const void *id, const void *regp)
+{
+ return (int)(unsigned long)id - (int)((const struct arm64_ftr_reg *)regp)->sys_id;
+}
+
+/*
+ * get_arm64_ftr_reg - Lookup a feature register entry using its
+ * sys_reg() encoding. With the array arm64_ftr_regs sorted in the
+ * ascending order of sys_id , we use binary search to find a matching
+ * entry.
+ *
+ * returns - Upon success, matching ftr_reg entry for id.
+ * - NULL on failure. It is upto the caller to decide
+ * the impact of a failure.
+ */
+static struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id)
+{
+ return bsearch((const void *)(unsigned long)sys_id,
+ arm64_ftr_regs,
+ ARRAY_SIZE(arm64_ftr_regs),
+ sizeof(arm64_ftr_regs[0]),
+ search_cmp_ftr_reg);
+}
+
+static u64 arm64_ftr_set_value(struct arm64_ftr_bits *ftrp, s64 reg, s64 ftr_val)
+{
+ u64 mask = arm64_ftr_mask(ftrp);
+
+ reg &= ~mask;
+ reg |= (ftr_val << ftrp->shift) & mask;
+ return reg;
+}
+
+static s64 arm64_ftr_safe_value(struct arm64_ftr_bits *ftrp, s64 new, s64 cur)
+{
+ s64 ret = 0;
+
+ switch (ftrp->type) {
+ case FTR_EXACT:
+ ret = ftrp->safe_val;
+ break;
+ case FTR_LOWER_SAFE:
+ ret = new < cur ? new : cur;
+ break;
+ case FTR_HIGHER_SAFE:
+ ret = new > cur ? new : cur;
+ break;
+ default:
+ BUG();
+ }
+
+ return ret;
+}
+
+static int __init sort_cmp_ftr_regs(const void *a, const void *b)
+{
+ return ((const struct arm64_ftr_reg *)a)->sys_id -
+ ((const struct arm64_ftr_reg *)b)->sys_id;
+}
+
+static void __init swap_ftr_regs(void *a, void *b, int size)
+{
+ struct arm64_ftr_reg tmp = *(struct arm64_ftr_reg *)a;
+ *(struct arm64_ftr_reg *)a = *(struct arm64_ftr_reg *)b;
+ *(struct arm64_ftr_reg *)b = tmp;
+}
+
+static void __init sort_ftr_regs(void)
+{
+ /* Keep the array sorted so that we can do the binary search */
+ sort(arm64_ftr_regs,
+ ARRAY_SIZE(arm64_ftr_regs),
+ sizeof(arm64_ftr_regs[0]),
+ sort_cmp_ftr_regs,
+ swap_ftr_regs);
+}
+
+/*
+ * Initialise the CPU feature register from Boot CPU values.
+ * Also initiliases the strict_mask for the register.
+ */
+static void __init init_cpu_ftr_reg(u32 sys_reg, u64 new)
+{
+ u64 val = 0;
+ u64 strict_mask = ~0x0ULL;
+ struct arm64_ftr_bits *ftrp;
+ struct arm64_ftr_reg *reg = get_arm64_ftr_reg(sys_reg);
+
+ BUG_ON(!reg);
+
+ for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) {
+ s64 ftr_new = arm64_ftr_value(ftrp, new);
+
+ val = arm64_ftr_set_value(ftrp, val, ftr_new);
+ if (!ftrp->strict)
+ strict_mask &= ~arm64_ftr_mask(ftrp);
+ }
+ reg->sys_val = val;
+ reg->strict_mask = strict_mask;
+}
+
+void __init init_cpu_features(struct cpuinfo_arm64 *info)
+{
+ /* Before we start using the tables, make sure it is sorted */
+ sort_ftr_regs();
+
+ init_cpu_ftr_reg(SYS_CTR_EL0, info->reg_ctr);
+ init_cpu_ftr_reg(SYS_DCZID_EL0, info->reg_dczid);
+ init_cpu_ftr_reg(SYS_CNTFRQ_EL0, info->reg_cntfrq);
+ init_cpu_ftr_reg(SYS_ID_AA64DFR0_EL1, info->reg_id_aa64dfr0);
+ init_cpu_ftr_reg(SYS_ID_AA64DFR1_EL1, info->reg_id_aa64dfr1);
+ init_cpu_ftr_reg(SYS_ID_AA64ISAR0_EL1, info->reg_id_aa64isar0);
+ init_cpu_ftr_reg(SYS_ID_AA64ISAR1_EL1, info->reg_id_aa64isar1);
+ init_cpu_ftr_reg(SYS_ID_AA64MMFR0_EL1, info->reg_id_aa64mmfr0);
+ init_cpu_ftr_reg(SYS_ID_AA64MMFR1_EL1, info->reg_id_aa64mmfr1);
+ init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
+ init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
+ init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
+ init_cpu_ftr_reg(SYS_ID_ISAR0_EL1, info->reg_id_isar0);
+ init_cpu_ftr_reg(SYS_ID_ISAR1_EL1, info->reg_id_isar1);
+ init_cpu_ftr_reg(SYS_ID_ISAR2_EL1, info->reg_id_isar2);
+ init_cpu_ftr_reg(SYS_ID_ISAR3_EL1, info->reg_id_isar3);
+ init_cpu_ftr_reg(SYS_ID_ISAR4_EL1, info->reg_id_isar4);
+ init_cpu_ftr_reg(SYS_ID_ISAR5_EL1, info->reg_id_isar5);
+ init_cpu_ftr_reg(SYS_ID_MMFR0_EL1, info->reg_id_mmfr0);
+ init_cpu_ftr_reg(SYS_ID_MMFR1_EL1, info->reg_id_mmfr1);
+ init_cpu_ftr_reg(SYS_ID_MMFR2_EL1, info->reg_id_mmfr2);
+ init_cpu_ftr_reg(SYS_ID_MMFR3_EL1, info->reg_id_mmfr3);
+ init_cpu_ftr_reg(SYS_ID_PFR0_EL1, info->reg_id_pfr0);
+ init_cpu_ftr_reg(SYS_ID_PFR1_EL1, info->reg_id_pfr1);
+ init_cpu_ftr_reg(SYS_MVFR0_EL1, info->reg_mvfr0);
+ init_cpu_ftr_reg(SYS_MVFR1_EL1, info->reg_mvfr1);
+ init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
+}
+
+static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
+{
+ struct arm64_ftr_bits *ftrp;
+
+ for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) {
+ s64 ftr_cur = arm64_ftr_value(ftrp, reg->sys_val);
+ s64 ftr_new = arm64_ftr_value(ftrp, new);
+
+ if (ftr_cur == ftr_new)
+ continue;
+ /* Find a safe value */
+ ftr_new = arm64_ftr_safe_value(ftrp, ftr_new, ftr_cur);
+ reg->sys_val = arm64_ftr_set_value(ftrp, reg->sys_val, ftr_new);
+ }
+
+}
+
+static int check_update_ftr_reg(u32 sys_id, int cpu, u64 val, u64 boot)
+{
+ struct arm64_ftr_reg *regp = get_arm64_ftr_reg(sys_id);
+
+ BUG_ON(!regp);
+ update_cpu_ftr_reg(regp, val);
+ if ((boot & regp->strict_mask) == (val & regp->strict_mask))
+ return 0;
+ pr_warn("SANITY CHECK: Unexpected variation in %s. Boot CPU: %#016llx, CPU%d: %#016llx\n",
+ regp->name, boot, cpu, val);
+ return 1;
+}
+
+/*
+ * Update system wide CPU feature registers with the values from a
+ * non-boot CPU. Also performs SANITY checks to make sure that there
+ * aren't any insane variations from that of the boot CPU.
+ */
+void update_cpu_features(int cpu,
+ struct cpuinfo_arm64 *info,
+ struct cpuinfo_arm64 *boot)
+{
+ int taint = 0;
+
+ /*
+ * The kernel can handle differing I-cache policies, but otherwise
+ * caches should look identical. Userspace JITs will make use of
+ * *minLine.
+ */
+ taint |= check_update_ftr_reg(SYS_CTR_EL0, cpu,
+ info->reg_ctr, boot->reg_ctr);
+
+ /*
+ * Userspace may perform DC ZVA instructions. Mismatched block sizes
+ * could result in too much or too little memory being zeroed if a
+ * process is preempted and migrated between CPUs.
+ */
+ taint |= check_update_ftr_reg(SYS_DCZID_EL0, cpu,
+ info->reg_dczid, boot->reg_dczid);
+
+ /* If different, timekeeping will be broken (especially with KVM) */
+ taint |= check_update_ftr_reg(SYS_CNTFRQ_EL0, cpu,
+ info->reg_cntfrq, boot->reg_cntfrq);
+
+ /*
+ * The kernel uses self-hosted debug features and expects CPUs to
+ * support identical debug features. We presently need CTX_CMPs, WRPs,
+ * and BRPs to be identical.
+ * ID_AA64DFR1 is currently RES0.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_AA64DFR0_EL1, cpu,
+ info->reg_id_aa64dfr0, boot->reg_id_aa64dfr0);
+ taint |= check_update_ftr_reg(SYS_ID_AA64DFR1_EL1, cpu,
+ info->reg_id_aa64dfr1, boot->reg_id_aa64dfr1);
+ /*
+ * Even in big.LITTLE, processors should be identical instruction-set
+ * wise.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_AA64ISAR0_EL1, cpu,
+ info->reg_id_aa64isar0, boot->reg_id_aa64isar0);
+ taint |= check_update_ftr_reg(SYS_ID_AA64ISAR1_EL1, cpu,
+ info->reg_id_aa64isar1, boot->reg_id_aa64isar1);
+
+ /*
+ * Differing PARange support is fine as long as all peripherals and
+ * memory are mapped within the minimum PARange of all CPUs.
+ * Linux should not care about secure memory.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_AA64MMFR0_EL1, cpu,
+ info->reg_id_aa64mmfr0, boot->reg_id_aa64mmfr0);
+ taint |= check_update_ftr_reg(SYS_ID_AA64MMFR1_EL1, cpu,
+ info->reg_id_aa64mmfr1, boot->reg_id_aa64mmfr1);
+
+ /*
+ * EL3 is not our concern.
+ * ID_AA64PFR1 is currently RES0.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
+ info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
+ taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
+ info->reg_id_aa64pfr1, boot->reg_id_aa64pfr1);
+
+ /*
+ * If we have AArch32, we care about 32-bit features for compat. These
+ * registers should be RES0 otherwise.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_DFR0_EL1, cpu,
+ info->reg_id_dfr0, boot->reg_id_dfr0);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR0_EL1, cpu,
+ info->reg_id_isar0, boot->reg_id_isar0);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR1_EL1, cpu,
+ info->reg_id_isar1, boot->reg_id_isar1);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR2_EL1, cpu,
+ info->reg_id_isar2, boot->reg_id_isar2);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR3_EL1, cpu,
+ info->reg_id_isar3, boot->reg_id_isar3);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR4_EL1, cpu,
+ info->reg_id_isar4, boot->reg_id_isar4);
+ taint |= check_update_ftr_reg(SYS_ID_ISAR5_EL1, cpu,
+ info->reg_id_isar5, boot->reg_id_isar5);
+
+ /*
+ * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
+ * ACTLR formats could differ across CPUs and therefore would have to
+ * be trapped for virtualization anyway.
+ */
+ taint |= check_update_ftr_reg(SYS_ID_MMFR0_EL1, cpu,
+ info->reg_id_mmfr0, boot->reg_id_mmfr0);
+ taint |= check_update_ftr_reg(SYS_ID_MMFR1_EL1, cpu,
+ info->reg_id_mmfr1, boot->reg_id_mmfr1);
+ taint |= check_update_ftr_reg(SYS_ID_MMFR2_EL1, cpu,
+ info->reg_id_mmfr2, boot->reg_id_mmfr2);
+ taint |= check_update_ftr_reg(SYS_ID_MMFR3_EL1, cpu,
+ info->reg_id_mmfr3, boot->reg_id_mmfr3);
+ taint |= check_update_ftr_reg(SYS_ID_PFR0_EL1, cpu,
+ info->reg_id_pfr0, boot->reg_id_pfr0);
+ taint |= check_update_ftr_reg(SYS_ID_PFR1_EL1, cpu,
+ info->reg_id_pfr1, boot->reg_id_pfr1);
+ taint |= check_update_ftr_reg(SYS_MVFR0_EL1, cpu,
+ info->reg_mvfr0, boot->reg_mvfr0);
+ taint |= check_update_ftr_reg(SYS_MVFR1_EL1, cpu,
+ info->reg_mvfr1, boot->reg_mvfr1);
+ taint |= check_update_ftr_reg(SYS_MVFR2_EL1, cpu,
+ info->reg_mvfr2, boot->reg_mvfr2);
+
+ /*
+ * Mismatched CPU features are a recipe for disaster. Don't even
+ * pretend to support them.
+ */
+ WARN_TAINT_ONCE(taint, TAINT_CPU_OUT_OF_SPEC,
+ "Unsupported CPU feature variation.\n");
+}
+
+u64 read_system_reg(u32 id)
+{
+ struct arm64_ftr_reg *regp = get_arm64_ftr_reg(id);
+
+ /* We shouldn't get a request for an unsupported register */
+ BUG_ON(!regp);
+ return regp->sys_val;
+}
static bool
feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry)
return val >= entry->min_field_value;
}
-#define __ID_FEAT_CHK(reg) \
-static bool __maybe_unused \
-has_##reg##_feature(const struct arm64_cpu_capabilities *entry) \
-{ \
- u64 val; \
- \
- val = read_cpuid(reg##_el1); \
- return feature_matches(val, entry); \
-}
+static bool
+has_cpuid_feature(const struct arm64_cpu_capabilities *entry)
+{
+ u64 val;
-__ID_FEAT_CHK(id_aa64pfr0);
-__ID_FEAT_CHK(id_aa64mmfr1);
-__ID_FEAT_CHK(id_aa64isar0);
+ val = read_system_reg(entry->sys_reg);
+ return feature_matches(val, entry);
+}
static const struct arm64_cpu_capabilities arm64_features[] = {
{
.desc = "GIC system register CPU interface",
.capability = ARM64_HAS_SYSREG_GIC_CPUIF,
- .matches = has_id_aa64pfr0_feature,
- .field_pos = 24,
+ .matches = has_cpuid_feature,
+ .sys_reg = SYS_ID_AA64PFR0_EL1,
+ .field_pos = ID_AA64PFR0_GIC_SHIFT,
.min_field_value = 1,
},
#ifdef CONFIG_ARM64_PAN
{
.desc = "Privileged Access Never",
.capability = ARM64_HAS_PAN,
- .matches = has_id_aa64mmfr1_feature,
- .field_pos = 20,
+ .matches = has_cpuid_feature,
+ .sys_reg = SYS_ID_AA64MMFR1_EL1,
+ .field_pos = ID_AA64MMFR1_PAN_SHIFT,
.min_field_value = 1,
.enable = cpu_enable_pan,
},
{
.desc = "LSE atomic instructions",
.capability = ARM64_HAS_LSE_ATOMICS,
- .matches = has_id_aa64isar0_feature,
- .field_pos = 20,
+ .matches = has_cpuid_feature,
+ .sys_reg = SYS_ID_AA64ISAR0_EL1,
+ .field_pos = ID_AA64ISAR0_ATOMICS_SHIFT,
.min_field_value = 2,
},
#endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */
{},
};
-void check_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
+#define HWCAP_CAP(reg, field, min_value, type, cap) \
+ { \
+ .desc = #cap, \
+ .matches = has_cpuid_feature, \
+ .sys_reg = reg, \
+ .field_pos = field, \
+ .min_field_value = min_value, \
+ .hwcap_type = type, \
+ .hwcap = cap, \
+ }
+
+static const struct arm64_cpu_capabilities arm64_hwcaps[] = {
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 2, CAP_HWCAP, HWCAP_PMULL),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 1, CAP_HWCAP, HWCAP_AES),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, 1, CAP_HWCAP, HWCAP_SHA1),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, 1, CAP_HWCAP, HWCAP_SHA2),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, 1, CAP_HWCAP, HWCAP_CRC32),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, 2, CAP_HWCAP, HWCAP_ATOMICS),
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 0, CAP_HWCAP, HWCAP_FP),
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 0, CAP_HWCAP, HWCAP_ASIMD),
+#ifdef CONFIG_COMPAT
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+#endif
+ {},
+};
+
+static void cap_set_hwcap(const struct arm64_cpu_capabilities *cap)
+{
+ switch (cap->hwcap_type) {
+ case CAP_HWCAP:
+ elf_hwcap |= cap->hwcap;
+ break;
+#ifdef CONFIG_COMPAT
+ case CAP_COMPAT_HWCAP:
+ compat_elf_hwcap |= (u32)cap->hwcap;
+ break;
+ case CAP_COMPAT_HWCAP2:
+ compat_elf_hwcap2 |= (u32)cap->hwcap;
+ break;
+#endif
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+/* Check if we have a particular HWCAP enabled */
+static bool cpus_have_hwcap(const struct arm64_cpu_capabilities *cap)
+{
+ bool rc;
+
+ switch (cap->hwcap_type) {
+ case CAP_HWCAP:
+ rc = (elf_hwcap & cap->hwcap) != 0;
+ break;
+#ifdef CONFIG_COMPAT
+ case CAP_COMPAT_HWCAP:
+ rc = (compat_elf_hwcap & (u32)cap->hwcap) != 0;
+ break;
+ case CAP_COMPAT_HWCAP2:
+ rc = (compat_elf_hwcap2 & (u32)cap->hwcap) != 0;
+ break;
+#endif
+ default:
+ WARN_ON(1);
+ rc = false;
+ }
+
+ return rc;
+}
+
+static void setup_cpu_hwcaps(void)
+{
+ int i;
+ const struct arm64_cpu_capabilities *hwcaps = arm64_hwcaps;
+
+ for (i = 0; hwcaps[i].desc; i++)
+ if (hwcaps[i].matches(&hwcaps[i]))
+ cap_set_hwcap(&hwcaps[i]);
+}
+
+void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
const char *info)
{
int i;
pr_info("%s %s\n", info, caps[i].desc);
cpus_set_cap(caps[i].capability);
}
+}
+
+/*
+ * Run through the enabled capabilities and enable() it on all active
+ * CPUs
+ */
+static void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
+{
+ int i;
+
+ for (i = 0; caps[i].desc; i++)
+ if (caps[i].enable && cpus_have_cap(caps[i].capability))
+ on_each_cpu(caps[i].enable, NULL, true);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Flag to indicate if we have computed the system wide
+ * capabilities based on the boot time active CPUs. This
+ * will be used to determine if a new booting CPU should
+ * go through the verification process to make sure that it
+ * supports the system capabilities, without using a hotplug
+ * notifier.
+ */
+static bool sys_caps_initialised;
+
+static inline void set_sys_caps_initialised(void)
+{
+ sys_caps_initialised = true;
+}
+
+/*
+ * __raw_read_system_reg() - Used by a STARTING cpu before cpuinfo is populated.
+ */
+static u64 __raw_read_system_reg(u32 sys_id)
+{
+ switch (sys_id) {
+ case SYS_ID_PFR0_EL1: return (u64)read_cpuid(ID_PFR0_EL1);
+ case SYS_ID_PFR1_EL1: return (u64)read_cpuid(ID_PFR1_EL1);
+ case SYS_ID_DFR0_EL1: return (u64)read_cpuid(ID_DFR0_EL1);
+ case SYS_ID_MMFR0_EL1: return (u64)read_cpuid(ID_MMFR0_EL1);
+ case SYS_ID_MMFR1_EL1: return (u64)read_cpuid(ID_MMFR1_EL1);
+ case SYS_ID_MMFR2_EL1: return (u64)read_cpuid(ID_MMFR2_EL1);
+ case SYS_ID_MMFR3_EL1: return (u64)read_cpuid(ID_MMFR3_EL1);
+ case SYS_ID_ISAR0_EL1: return (u64)read_cpuid(ID_ISAR0_EL1);
+ case SYS_ID_ISAR1_EL1: return (u64)read_cpuid(ID_ISAR1_EL1);
+ case SYS_ID_ISAR2_EL1: return (u64)read_cpuid(ID_ISAR2_EL1);
+ case SYS_ID_ISAR3_EL1: return (u64)read_cpuid(ID_ISAR3_EL1);
+ case SYS_ID_ISAR4_EL1: return (u64)read_cpuid(ID_ISAR4_EL1);
+ case SYS_ID_ISAR5_EL1: return (u64)read_cpuid(ID_ISAR4_EL1);
+ case SYS_MVFR0_EL1: return (u64)read_cpuid(MVFR0_EL1);
+ case SYS_MVFR1_EL1: return (u64)read_cpuid(MVFR1_EL1);
+ case SYS_MVFR2_EL1: return (u64)read_cpuid(MVFR2_EL1);
+
+ case SYS_ID_AA64PFR0_EL1: return (u64)read_cpuid(ID_AA64PFR0_EL1);
+ case SYS_ID_AA64PFR1_EL1: return (u64)read_cpuid(ID_AA64PFR0_EL1);
+ case SYS_ID_AA64DFR0_EL1: return (u64)read_cpuid(ID_AA64DFR0_EL1);
+ case SYS_ID_AA64DFR1_EL1: return (u64)read_cpuid(ID_AA64DFR0_EL1);
+ case SYS_ID_AA64MMFR0_EL1: return (u64)read_cpuid(ID_AA64MMFR0_EL1);
+ case SYS_ID_AA64MMFR1_EL1: return (u64)read_cpuid(ID_AA64MMFR1_EL1);
+ case SYS_ID_AA64ISAR0_EL1: return (u64)read_cpuid(ID_AA64ISAR0_EL1);
+ case SYS_ID_AA64ISAR1_EL1: return (u64)read_cpuid(ID_AA64ISAR1_EL1);
+
+ case SYS_CNTFRQ_EL0: return (u64)read_cpuid(CNTFRQ_EL0);
+ case SYS_CTR_EL0: return (u64)read_cpuid(CTR_EL0);
+ case SYS_DCZID_EL0: return (u64)read_cpuid(DCZID_EL0);
+ default:
+ BUG();
+ return 0;
+ }
+}
+
+/*
+ * Park the CPU which doesn't have the capability as advertised
+ * by the system.
+ */
+static void fail_incapable_cpu(char *cap_type,
+ const struct arm64_cpu_capabilities *cap)
+{
+ int cpu = smp_processor_id();
+
+ pr_crit("CPU%d: missing %s : %s\n", cpu, cap_type, cap->desc);
+ /* Mark this CPU absent */
+ set_cpu_present(cpu, 0);
+
+ /* Check if we can park ourselves */
+ if (cpu_ops[cpu] && cpu_ops[cpu]->cpu_die)
+ cpu_ops[cpu]->cpu_die(cpu);
+ asm(
+ "1: wfe\n"
+ " wfi\n"
+ " b 1b");
+}
- /* second pass allows enable() to consider interacting capabilities */
+/*
+ * Run through the enabled system capabilities and enable() it on this CPU.
+ * The capabilities were decided based on the available CPUs at the boot time.
+ * Any new CPU should match the system wide status of the capability. If the
+ * new CPU doesn't have a capability which the system now has enabled, we
+ * cannot do anything to fix it up and could cause unexpected failures. So
+ * we park the CPU.
+ */
+void verify_local_cpu_capabilities(void)
+{
+ int i;
+ const struct arm64_cpu_capabilities *caps;
+
+ /*
+ * If we haven't computed the system capabilities, there is nothing
+ * to verify.
+ */
+ if (!sys_caps_initialised)
+ return;
+
+ caps = arm64_features;
for (i = 0; caps[i].desc; i++) {
- if (cpus_have_cap(caps[i].capability) && caps[i].enable)
- caps[i].enable();
+ if (!cpus_have_cap(caps[i].capability) || !caps[i].sys_reg)
+ continue;
+ /*
+ * If the new CPU misses an advertised feature, we cannot proceed
+ * further, park the cpu.
+ */
+ if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i]))
+ fail_incapable_cpu("arm64_features", &caps[i]);
+ if (caps[i].enable)
+ caps[i].enable(NULL);
}
+
+ for (i = 0, caps = arm64_hwcaps; caps[i].desc; i++) {
+ if (!cpus_have_hwcap(&caps[i]))
+ continue;
+ if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i]))
+ fail_incapable_cpu("arm64_hwcaps", &caps[i]);
+ }
+}
+
+#else /* !CONFIG_HOTPLUG_CPU */
+
+static inline void set_sys_caps_initialised(void)
+{
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static void setup_feature_capabilities(void)
+{
+ update_cpu_capabilities(arm64_features, "detected feature:");
+ enable_cpu_capabilities(arm64_features);
}
-void check_local_cpu_features(void)
+void __init setup_cpu_features(void)
{
- check_cpu_capabilities(arm64_features, "detected feature:");
+ u32 cwg;
+ int cls;
+
+ /* Set the CPU feature capabilies */
+ setup_feature_capabilities();
+ setup_cpu_hwcaps();
+
+ /* Advertise that we have computed the system capabilities */
+ set_sys_caps_initialised();
+
+ /*
+ * Check for sane CTR_EL0.CWG value.
+ */
+ cwg = cache_type_cwg();
+ cls = cache_line_size();
+ if (!cwg)
+ pr_warn("No Cache Writeback Granule information, assuming cache line size %d\n",
+ cls);
+ if (L1_CACHE_BYTES < cls)
+ pr_warn("L1_CACHE_BYTES smaller than the Cache Writeback Granule (%d < %d)\n",
+ L1_CACHE_BYTES, cls);
}
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/personality.h>
#include <linux/preempt.h>
#include <linux/printk.h>
+#include <linux/seq_file.h>
+#include <linux/sched.h>
#include <linux/smp.h>
/*
*/
DEFINE_PER_CPU(struct cpuinfo_arm64, cpu_data);
static struct cpuinfo_arm64 boot_cpu_data;
-static bool mixed_endian_el0 = true;
static char *icache_policy_str[] = {
[ICACHE_POLICY_RESERVED] = "RESERVED/UNKNOWN",
unsigned long __icache_flags;
-static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
+static const char *const hwcap_str[] = {
+ "fp",
+ "asimd",
+ "evtstrm",
+ "aes",
+ "pmull",
+ "sha1",
+ "sha2",
+ "crc32",
+ "atomics",
+ NULL
+};
+
+#ifdef CONFIG_COMPAT
+static const char *const compat_hwcap_str[] = {
+ "swp",
+ "half",
+ "thumb",
+ "26bit",
+ "fastmult",
+ "fpa",
+ "vfp",
+ "edsp",
+ "java",
+ "iwmmxt",
+ "crunch",
+ "thumbee",
+ "neon",
+ "vfpv3",
+ "vfpv3d16",
+ "tls",
+ "vfpv4",
+ "idiva",
+ "idivt",
+ "vfpd32",
+ "lpae",
+ "evtstrm"
+};
+
+static const char *const compat_hwcap2_str[] = {
+ "aes",
+ "pmull",
+ "sha1",
+ "sha2",
+ "crc32",
+ NULL
+};
+#endif /* CONFIG_COMPAT */
+
+static int c_show(struct seq_file *m, void *v)
{
- unsigned int cpu = smp_processor_id();
- u32 l1ip = CTR_L1IP(info->reg_ctr);
+ int i, j;
+
+ for_each_online_cpu(i) {
+ struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
+ u32 midr = cpuinfo->reg_midr;
- if (l1ip != ICACHE_POLICY_PIPT) {
/*
- * VIPT caches are non-aliasing if the VA always equals the PA
- * in all bit positions that are covered by the index. This is
- * the case if the size of a way (# of sets * line size) does
- * not exceed PAGE_SIZE.
+ * glibc reads /proc/cpuinfo to determine the number of
+ * online processors, looking for lines beginning with
+ * "processor". Give glibc what it expects.
*/
- u32 waysize = icache_get_numsets() * icache_get_linesize();
+ seq_printf(m, "processor\t: %d\n", i);
- if (l1ip != ICACHE_POLICY_VIPT || waysize > PAGE_SIZE)
- set_bit(ICACHEF_ALIASING, &__icache_flags);
+ /*
+ * Dump out the common processor features in a single line.
+ * Userspace should read the hwcaps with getauxval(AT_HWCAP)
+ * rather than attempting to parse this, but there's a body of
+ * software which does already (at least for 32-bit).
+ */
+ seq_puts(m, "Features\t:");
+ if (personality(current->personality) == PER_LINUX32) {
+#ifdef CONFIG_COMPAT
+ for (j = 0; compat_hwcap_str[j]; j++)
+ if (compat_elf_hwcap & (1 << j))
+ seq_printf(m, " %s", compat_hwcap_str[j]);
+
+ for (j = 0; compat_hwcap2_str[j]; j++)
+ if (compat_elf_hwcap2 & (1 << j))
+ seq_printf(m, " %s", compat_hwcap2_str[j]);
+#endif /* CONFIG_COMPAT */
+ } else {
+ for (j = 0; hwcap_str[j]; j++)
+ if (elf_hwcap & (1 << j))
+ seq_printf(m, " %s", hwcap_str[j]);
+ }
+ seq_puts(m, "\n");
+
+ seq_printf(m, "CPU implementer\t: 0x%02x\n",
+ MIDR_IMPLEMENTOR(midr));
+ seq_printf(m, "CPU architecture: 8\n");
+ seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
+ seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
+ seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
}
- if (l1ip == ICACHE_POLICY_AIVIVT)
- set_bit(ICACHEF_AIVIVT, &__icache_flags);
- pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu);
-}
-
-bool cpu_supports_mixed_endian_el0(void)
-{
- return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
-}
-
-bool system_supports_mixed_endian_el0(void)
-{
- return mixed_endian_el0;
+ return 0;
}
-static void update_mixed_endian_el0_support(struct cpuinfo_arm64 *info)
+static void *c_start(struct seq_file *m, loff_t *pos)
{
- mixed_endian_el0 &= id_aa64mmfr0_mixed_endian_el0(info->reg_id_aa64mmfr0);
+ return *pos < 1 ? (void *)1 : NULL;
}
-static void update_cpu_features(struct cpuinfo_arm64 *info)
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- update_mixed_endian_el0_support(info);
+ ++*pos;
+ return NULL;
}
-static int check_reg_mask(char *name, u64 mask, u64 boot, u64 cur, int cpu)
+static void c_stop(struct seq_file *m, void *v)
{
- if ((boot & mask) == (cur & mask))
- return 0;
-
- pr_warn("SANITY CHECK: Unexpected variation in %s. Boot CPU: %#016lx, CPU%d: %#016lx\n",
- name, (unsigned long)boot, cpu, (unsigned long)cur);
-
- return 1;
}
-#define CHECK_MASK(field, mask, boot, cur, cpu) \
- check_reg_mask(#field, mask, (boot)->reg_ ## field, (cur)->reg_ ## field, cpu)
-
-#define CHECK(field, boot, cur, cpu) \
- CHECK_MASK(field, ~0ULL, boot, cur, cpu)
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = c_show
+};
-/*
- * Verify that CPUs don't have unexpected differences that will cause problems.
- */
-static void cpuinfo_sanity_check(struct cpuinfo_arm64 *cur)
+static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
{
unsigned int cpu = smp_processor_id();
- struct cpuinfo_arm64 *boot = &boot_cpu_data;
- unsigned int diff = 0;
-
- /*
- * The kernel can handle differing I-cache policies, but otherwise
- * caches should look identical. Userspace JITs will make use of
- * *minLine.
- */
- diff |= CHECK_MASK(ctr, 0xffff3fff, boot, cur, cpu);
-
- /*
- * Userspace may perform DC ZVA instructions. Mismatched block sizes
- * could result in too much or too little memory being zeroed if a
- * process is preempted and migrated between CPUs.
- */
- diff |= CHECK(dczid, boot, cur, cpu);
-
- /* If different, timekeeping will be broken (especially with KVM) */
- diff |= CHECK(cntfrq, boot, cur, cpu);
-
- /*
- * The kernel uses self-hosted debug features and expects CPUs to
- * support identical debug features. We presently need CTX_CMPs, WRPs,
- * and BRPs to be identical.
- * ID_AA64DFR1 is currently RES0.
- */
- diff |= CHECK(id_aa64dfr0, boot, cur, cpu);
- diff |= CHECK(id_aa64dfr1, boot, cur, cpu);
-
- /*
- * Even in big.LITTLE, processors should be identical instruction-set
- * wise.
- */
- diff |= CHECK(id_aa64isar0, boot, cur, cpu);
- diff |= CHECK(id_aa64isar1, boot, cur, cpu);
-
- /*
- * Differing PARange support is fine as long as all peripherals and
- * memory are mapped within the minimum PARange of all CPUs.
- * Linux should not care about secure memory.
- * ID_AA64MMFR1 is currently RES0.
- */
- diff |= CHECK_MASK(id_aa64mmfr0, 0xffffffffffff0ff0, boot, cur, cpu);
- diff |= CHECK(id_aa64mmfr1, boot, cur, cpu);
-
- /*
- * EL3 is not our concern.
- * ID_AA64PFR1 is currently RES0.
- */
- diff |= CHECK_MASK(id_aa64pfr0, 0xffffffffffff0fff, boot, cur, cpu);
- diff |= CHECK(id_aa64pfr1, boot, cur, cpu);
+ u32 l1ip = CTR_L1IP(info->reg_ctr);
- /*
- * If we have AArch32, we care about 32-bit features for compat. These
- * registers should be RES0 otherwise.
- */
- diff |= CHECK(id_dfr0, boot, cur, cpu);
- diff |= CHECK(id_isar0, boot, cur, cpu);
- diff |= CHECK(id_isar1, boot, cur, cpu);
- diff |= CHECK(id_isar2, boot, cur, cpu);
- diff |= CHECK(id_isar3, boot, cur, cpu);
- diff |= CHECK(id_isar4, boot, cur, cpu);
- diff |= CHECK(id_isar5, boot, cur, cpu);
- /*
- * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
- * ACTLR formats could differ across CPUs and therefore would have to
- * be trapped for virtualization anyway.
- */
- diff |= CHECK_MASK(id_mmfr0, 0xff0fffff, boot, cur, cpu);
- diff |= CHECK(id_mmfr1, boot, cur, cpu);
- diff |= CHECK(id_mmfr2, boot, cur, cpu);
- diff |= CHECK(id_mmfr3, boot, cur, cpu);
- diff |= CHECK(id_pfr0, boot, cur, cpu);
- diff |= CHECK(id_pfr1, boot, cur, cpu);
+ if (l1ip != ICACHE_POLICY_PIPT) {
+ /*
+ * VIPT caches are non-aliasing if the VA always equals the PA
+ * in all bit positions that are covered by the index. This is
+ * the case if the size of a way (# of sets * line size) does
+ * not exceed PAGE_SIZE.
+ */
+ u32 waysize = icache_get_numsets() * icache_get_linesize();
- diff |= CHECK(mvfr0, boot, cur, cpu);
- diff |= CHECK(mvfr1, boot, cur, cpu);
- diff |= CHECK(mvfr2, boot, cur, cpu);
+ if (l1ip != ICACHE_POLICY_VIPT || waysize > PAGE_SIZE)
+ set_bit(ICACHEF_ALIASING, &__icache_flags);
+ }
+ if (l1ip == ICACHE_POLICY_AIVIVT)
+ set_bit(ICACHEF_AIVIVT, &__icache_flags);
- /*
- * Mismatched CPU features are a recipe for disaster. Don't even
- * pretend to support them.
- */
- WARN_TAINT_ONCE(diff, TAINT_CPU_OUT_OF_SPEC,
- "Unsupported CPU feature variation.\n");
+ pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu);
}
static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
cpuinfo_detect_icache_policy(info);
check_local_cpu_errata();
- check_local_cpu_features();
- update_cpu_features(info);
}
void cpuinfo_store_cpu(void)
{
struct cpuinfo_arm64 *info = this_cpu_ptr(&cpu_data);
__cpuinfo_store_cpu(info);
- cpuinfo_sanity_check(info);
+ update_cpu_features(smp_processor_id(), info, &boot_cpu_data);
}
void __init cpuinfo_store_boot_cpu(void)
__cpuinfo_store_cpu(info);
boot_cpu_data = *info;
+ init_cpu_features(&boot_cpu_data);
}
#include <linux/stat.h>
#include <linux/uaccess.h>
-#include <asm/debug-monitors.h>
+#include <asm/cpufeature.h>
#include <asm/cputype.h>
+#include <asm/debug-monitors.h>
#include <asm/system_misc.h>
/* Determine debug architecture. */
u8 debug_monitors_arch(void)
{
- return read_cpuid(ID_AA64DFR0_EL1) & 0xf;
+ return cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ ID_AA64DFR0_DEBUGVER_SHIFT);
}
/*
* we want to be. The kernel image wants to be placed at TEXT_OFFSET
* from start of RAM.
*/
-ENTRY(efi_stub_entry)
+ENTRY(entry)
/*
* Create a stack frame to save FP/LR with extra space
* for image_addr variable passed to efi_entry().
* entries for the VA range of the current image, so no maintenance is
* necessary.
*/
- adr x0, efi_stub_entry
- adr x1, efi_stub_entry_end
+ adr x0, entry
+ adr x1, entry_end
sub x1, x1, x0
bl __flush_dcache_area
ldp x29, x30, [sp], #32
ret
-efi_stub_entry_end:
-ENDPROC(efi_stub_entry)
+entry_end:
+ENDPROC(entry)
.mmap_sem = __RWSEM_INITIALIZER(efi_mm.mmap_sem),
.page_table_lock = __SPIN_LOCK_UNLOCKED(efi_mm.page_table_lock),
.mmlist = LIST_HEAD_INIT(efi_mm.mmlist),
- INIT_MM_CONTEXT(efi_mm)
};
static int uefi_debug __initdata;
else
cpu_switch_mm(mm->pgd, mm);
- flush_tlb_all();
+ local_flush_tlb_all();
if (icache_is_aivivt())
- __flush_icache_all();
+ __local_flush_icache_all();
}
void efi_virtmap_load(void)
b.eq el0_fpsimd_acc
cmp x24, #ESR_ELx_EC_FP_EXC32 // FP/ASIMD exception
b.eq el0_fpsimd_exc
+ cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception
+ b.eq el0_sp_pc
cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0
b.eq el0_undef
cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap
*/
static int __init fpsimd_init(void)
{
- u64 pfr = read_cpuid(ID_AA64PFR0_EL1);
-
- if (pfr & (0xf << 16)) {
+ if (elf_hwcap & HWCAP_FP) {
+ fpsimd_pm_init();
+ fpsimd_hotplug_init();
+ } else {
pr_notice("Floating-point is not implemented\n");
- return 0;
}
- elf_hwcap |= HWCAP_FP;
- if (pfr & (0xf << 20))
+ if (!(elf_hwcap & HWCAP_ASIMD))
pr_notice("Advanced SIMD is not implemented\n");
- else
- elf_hwcap |= HWCAP_ASIMD;
-
- fpsimd_pm_init();
- fpsimd_hotplug_init();
return 0;
}
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include <asm/cputype.h>
+#include <asm/kernel-pgtable.h>
#include <asm/memory.h>
-#include <asm/thread_info.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
+#include <asm/sysreg.h>
+#include <asm/thread_info.h>
#include <asm/virt.h>
#define __PHYS_OFFSET (KERNEL_START - TEXT_OFFSET)
#error TEXT_OFFSET must be less than 2MB
#endif
-#ifdef CONFIG_ARM64_64K_PAGES
-#define BLOCK_SHIFT PAGE_SHIFT
-#define BLOCK_SIZE PAGE_SIZE
-#define TABLE_SHIFT PMD_SHIFT
-#else
-#define BLOCK_SHIFT SECTION_SHIFT
-#define BLOCK_SIZE SECTION_SIZE
-#define TABLE_SHIFT PUD_SHIFT
-#endif
-
#define KERNEL_START _text
#define KERNEL_END _end
-/*
- * Initial memory map attributes.
- */
-#define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF | PTE_SHARED
-#define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S
-
-#ifdef CONFIG_ARM64_64K_PAGES
-#define MM_MMUFLAGS PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
-#else
-#define MM_MMUFLAGS PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
-#endif
-
/*
* Kernel startup entry point.
* ---------------------------
#endif
#ifdef CONFIG_EFI
- .globl stext_offset
- .set stext_offset, stext - efi_head
+ .globl __efistub_stext_offset
+ .set __efistub_stext_offset, stext - efi_head
.align 3
pe_header:
.ascii "PE"
.long _end - stext // SizeOfCode
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
- .long efi_stub_entry - efi_head // AddressOfEntryPoint
- .long stext_offset // BaseOfCode
+ .long __efistub_entry - efi_head // AddressOfEntryPoint
+ .long __efistub_stext_offset // BaseOfCode
extra_header_fields:
.quad 0 // ImageBase
.long _end - efi_head // SizeOfImage
// Everything before the kernel image is considered part of the header
- .long stext_offset // SizeOfHeaders
+ .long __efistub_stext_offset // SizeOfHeaders
.long 0 // CheckSum
.short 0xa // Subsystem (EFI application)
.short 0 // DllCharacteristics
.byte 0
.byte 0 // end of 0 padding of section name
.long _end - stext // VirtualSize
- .long stext_offset // VirtualAddress
+ .long __efistub_stext_offset // VirtualAddress
.long _edata - stext // SizeOfRawData
- .long stext_offset // PointerToRawData
+ .long __efistub_stext_offset // PointerToRawData
.long 0 // PointerToRelocations (0 for executables)
.long 0 // PointerToLineNumbers (0 for executables)
*/
.macro create_pgd_entry, tbl, virt, tmp1, tmp2
create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2
-#if SWAPPER_PGTABLE_LEVELS == 3
- create_table_entry \tbl, \virt, TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
+#if SWAPPER_PGTABLE_LEVELS > 3
+ create_table_entry \tbl, \virt, PUD_SHIFT, PTRS_PER_PUD, \tmp1, \tmp2
+#endif
+#if SWAPPER_PGTABLE_LEVELS > 2
+ create_table_entry \tbl, \virt, SWAPPER_TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
#endif
.endm
* Corrupts: phys, start, end, pstate
*/
.macro create_block_map, tbl, flags, phys, start, end
- lsr \phys, \phys, #BLOCK_SHIFT
- lsr \start, \start, #BLOCK_SHIFT
+ lsr \phys, \phys, #SWAPPER_BLOCK_SHIFT
+ lsr \start, \start, #SWAPPER_BLOCK_SHIFT
and \start, \start, #PTRS_PER_PTE - 1 // table index
- orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry
- lsr \end, \end, #BLOCK_SHIFT
+ orr \phys, \flags, \phys, lsl #SWAPPER_BLOCK_SHIFT // table entry
+ lsr \end, \end, #SWAPPER_BLOCK_SHIFT
and \end, \end, #PTRS_PER_PTE - 1 // table end index
9999: str \phys, [\tbl, \start, lsl #3] // store the entry
add \start, \start, #1 // next entry
- add \phys, \phys, #BLOCK_SIZE // next block
+ add \phys, \phys, #SWAPPER_BLOCK_SIZE // next block
cmp \start, \end
b.ls 9999b
.endm
cmp x0, x6
b.lo 1b
- ldr x7, =MM_MMUFLAGS
+ ldr x7, =SWAPPER_MM_MMUFLAGS
/*
* Create the identity mapping.
str_l x21, __fdt_pointer, x5 // Save FDT pointer
str_l x24, memstart_addr, x6 // Save PHYS_OFFSET
mov x29, #0
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
b start_kernel
ENDPROC(__mmap_switched)
* x0 = SCTLR_EL1 value for turning on the MMU.
* x27 = *virtual* address to jump to upon completion
*
- * other registers depend on the function called upon completion
+ * Other registers depend on the function called upon completion.
+ *
+ * Checks if the selected granule size is supported by the CPU.
+ * If it isn't, park the CPU
*/
.section ".idmap.text", "ax"
__enable_mmu:
+ mrs x1, ID_AA64MMFR0_EL1
+ ubfx x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4
+ cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
+ b.ne __no_granule_support
ldr x5, =vectors
msr vbar_el1, x5
msr ttbr0_el1, x25 // load TTBR0
isb
br x27
ENDPROC(__enable_mmu)
+
+__no_granule_support:
+ wfe
+ b __no_granule_support
+ENDPROC(__no_granule_support)
#include <linux/ptrace.h>
#include <linux/smp.h>
+#include <asm/compat.h>
#include <asm/current.h>
#include <asm/debug-monitors.h>
#include <asm/hw_breakpoint.h>
HW_BREAKPOINT_RESTORE
};
+static int is_compat_bp(struct perf_event *bp)
+{
+ struct task_struct *tsk = bp->hw.target;
+
+ /*
+ * tsk can be NULL for per-cpu (non-ptrace) breakpoints.
+ * In this case, use the native interface, since we don't have
+ * the notion of a "compat CPU" and could end up relying on
+ * deprecated behaviour if we use unaligned watchpoints in
+ * AArch64 state.
+ */
+ return tsk && is_compat_thread(task_thread_info(tsk));
+}
+
/**
* hw_breakpoint_slot_setup - Find and setup a perf slot according to
* operations
* Watchpoints can be of length 1, 2, 4 or 8 bytes.
*/
if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
- if (is_compat_task()) {
+ if (is_compat_bp(bp)) {
if (info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
info->ctrl.len != ARM_BREAKPOINT_LEN_4)
return -EINVAL;
* AArch32 tasks expect some simple alignment fixups, so emulate
* that here.
*/
- if (is_compat_task()) {
+ if (is_compat_bp(bp)) {
if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
alignment_mask = 0x7;
else
#define __HEAD_FLAG_BE 0
#endif
-#define __HEAD_FLAGS (__HEAD_FLAG_BE << 0)
+#define __HEAD_FLAG_PAGE_SIZE ((PAGE_SHIFT - 10) / 2)
+
+#define __HEAD_FLAGS ((__HEAD_FLAG_BE << 0) | \
+ (__HEAD_FLAG_PAGE_SIZE << 1))
/*
* These will output as part of the Image header, which should be little-endian
_kernel_offset_le = DATA_LE64(TEXT_OFFSET); \
_kernel_flags_le = DATA_LE64(__HEAD_FLAGS);
+#ifdef CONFIG_EFI
+
+/*
+ * The EFI stub has its own symbol namespace prefixed by __efistub_, to
+ * isolate it from the kernel proper. The following symbols are legally
+ * accessed by the stub, so provide some aliases to make them accessible.
+ * Only include data symbols here, or text symbols of functions that are
+ * guaranteed to be safe when executed at another offset than they were
+ * linked at. The routines below are all implemented in assembler in a
+ * position independent manner
+ */
+__efistub_memcmp = __pi_memcmp;
+__efistub_memchr = __pi_memchr;
+__efistub_memcpy = __pi_memcpy;
+__efistub_memmove = __pi_memmove;
+__efistub_memset = __pi_memset;
+__efistub_strlen = __pi_strlen;
+__efistub_strcmp = __pi_strcmp;
+__efistub_strncmp = __pi_strncmp;
+__efistub___flush_dcache_area = __pi___flush_dcache_area;
+
+#ifdef CONFIG_KASAN
+__efistub___memcpy = __pi_memcpy;
+__efistub___memmove = __pi_memmove;
+__efistub___memset = __pi_memset;
+#endif
+
+__efistub__text = _text;
+__efistub__end = _end;
+__efistub__edata = _edata;
+
+#endif
+
#endif /* __ASM_IMAGE_H */
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/seq_file.h>
-#include <linux/ratelimit.h>
unsigned long irq_err_count;
if (!handle_arch_irq)
panic("No interrupt controller found.");
}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
- struct irq_data *d = irq_desc_get_irq_data(desc);
- const struct cpumask *affinity = irq_data_get_affinity_mask(d);
- struct irq_chip *c;
- bool ret = false;
-
- /*
- * If this is a per-CPU interrupt, or the affinity does not
- * include this CPU, then we have nothing to do.
- */
- if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
- return false;
-
- if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
- affinity = cpu_online_mask;
- ret = true;
- }
-
- c = irq_data_get_irq_chip(d);
- if (!c->irq_set_affinity)
- pr_debug("IRQ%u: unable to set affinity\n", d->irq);
- else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
- cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
- return ret;
-}
-
-/*
- * The current CPU has been marked offline. Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
- unsigned int i;
- struct irq_desc *desc;
- unsigned long flags;
-
- local_irq_save(flags);
-
- for_each_irq_desc(i, desc) {
- bool affinity_broken;
-
- raw_spin_lock(&desc->lock);
- affinity_broken = migrate_one_irq(desc);
- raw_spin_unlock(&desc->lock);
-
- if (affinity_broken)
- pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
- i, smp_processor_id());
- }
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
#include <linux/bitops.h>
#include <linux/elf.h>
#include <linux/gfp.h>
+#include <linux/kasan.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/moduleloader.h>
void *module_alloc(unsigned long size)
{
- return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
- GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
- NUMA_NO_NODE, __builtin_return_address(0));
+ void *p;
+
+ p = __vmalloc_node_range(size, MODULE_ALIGN, MODULES_VADDR, MODULES_END,
+ GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
+ NUMA_NO_NODE, __builtin_return_address(0));
+
+ if (p && (kasan_module_alloc(p, size) < 0)) {
+ vfree(p);
+ return NULL;
+ }
+
+ return p;
}
enum aarch64_reloc_op {
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#define pr_fmt(fmt) "hw perfevents: " fmt
-
-#include <linux/bitmap.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/of_device.h>
-#include <linux/perf_event.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/uaccess.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
#include <asm/irq_regs.h>
-#include <asm/pmu.h>
-
-/*
- * ARMv8 supports a maximum of 32 events.
- * The cycle counter is included in this total.
- */
-#define ARMPMU_MAX_HWEVENTS 32
-
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *cpu_pmu;
-
-int
-armpmu_get_max_events(void)
-{
- int max_events = 0;
-
- if (cpu_pmu != NULL)
- max_events = cpu_pmu->num_events;
-
- return max_events;
-}
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
- return armpmu_get_max_events();
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-#define HW_OP_UNSUPPORTED 0xFFFF
-
-#define C(_x) \
- PERF_COUNT_HW_CACHE_##_x
-
-#define CACHE_OP_UNSUPPORTED 0xFFFF
-
-#define PERF_MAP_ALL_UNSUPPORTED \
- [0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED
-
-#define PERF_CACHE_MAP_ALL_UNSUPPORTED \
-[0 ... C(MAX) - 1] = { \
- [0 ... C(OP_MAX) - 1] = { \
- [0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \
- }, \
-}
-
-static int
-armpmu_map_cache_event(const unsigned (*cache_map)
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX],
- u64 config)
-{
- unsigned int cache_type, cache_op, cache_result, ret;
-
- cache_type = (config >> 0) & 0xff;
- if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
- return -EINVAL;
-
- cache_op = (config >> 8) & 0xff;
- if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
- return -EINVAL;
-
- cache_result = (config >> 16) & 0xff;
- if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return -EINVAL;
-
- ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
-
- if (ret == CACHE_OP_UNSUPPORTED)
- return -ENOENT;
-
- return ret;
-}
-
-static int
-armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
-{
- int mapping;
-
- if (config >= PERF_COUNT_HW_MAX)
- return -EINVAL;
-
- mapping = (*event_map)[config];
- return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
-}
-
-static int
-armpmu_map_raw_event(u32 raw_event_mask, u64 config)
-{
- return (int)(config & raw_event_mask);
-}
-
-static int map_cpu_event(struct perf_event *event,
- const unsigned (*event_map)[PERF_COUNT_HW_MAX],
- const unsigned (*cache_map)
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX],
- u32 raw_event_mask)
-{
- u64 config = event->attr.config;
-
- switch (event->attr.type) {
- case PERF_TYPE_HARDWARE:
- return armpmu_map_event(event_map, config);
- case PERF_TYPE_HW_CACHE:
- return armpmu_map_cache_event(cache_map, config);
- case PERF_TYPE_RAW:
- return armpmu_map_raw_event(raw_event_mask, config);
- }
-
- return -ENOENT;
-}
-
-int
-armpmu_event_set_period(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- s64 left = local64_read(&hwc->period_left);
- s64 period = hwc->sample_period;
- int ret = 0;
-
- if (unlikely(left <= -period)) {
- left = period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- if (unlikely(left <= 0)) {
- left += period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- /*
- * Limit the maximum period to prevent the counter value
- * from overtaking the one we are about to program. In
- * effect we are reducing max_period to account for
- * interrupt latency (and we are being very conservative).
- */
- if (left > (armpmu->max_period >> 1))
- left = armpmu->max_period >> 1;
-
- local64_set(&hwc->prev_count, (u64)-left);
-
- armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
-
- perf_event_update_userpage(event);
-
- return ret;
-}
-
-u64
-armpmu_event_update(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- u64 delta, prev_raw_count, new_raw_count;
-
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- new_raw_count = armpmu->read_counter(idx);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-
- local64_add(delta, &event->count);
- local64_sub(delta, &hwc->period_left);
-
- return new_raw_count;
-}
-
-static void
-armpmu_read(struct perf_event *event)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- /* Don't read disabled counters! */
- if (hwc->idx < 0)
- return;
-
- armpmu_event_update(event, hwc, hwc->idx);
-}
-
-static void
-armpmu_stop(struct perf_event *event, int flags)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hwc = &event->hw;
-
- /*
- * ARM pmu always has to update the counter, so ignore
- * PERF_EF_UPDATE, see comments in armpmu_start().
- */
- if (!(hwc->state & PERF_HES_STOPPED)) {
- armpmu->disable(hwc, hwc->idx);
- barrier(); /* why? */
- armpmu_event_update(event, hwc, hwc->idx);
- hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
- }
-}
-
-static void
-armpmu_start(struct perf_event *event, int flags)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hwc = &event->hw;
-
- /*
- * ARM pmu always has to reprogram the period, so ignore
- * PERF_EF_RELOAD, see the comment below.
- */
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
- hwc->state = 0;
- /*
- * Set the period again. Some counters can't be stopped, so when we
- * were stopped we simply disabled the IRQ source and the counter
- * may have been left counting. If we don't do this step then we may
- * get an interrupt too soon or *way* too late if the overflow has
- * happened since disabling.
- */
- armpmu_event_set_period(event, hwc, hwc->idx);
- armpmu->enable(hwc, hwc->idx);
-}
-
-static void
-armpmu_del(struct perf_event *event, int flags)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- WARN_ON(idx < 0);
-
- armpmu_stop(event, PERF_EF_UPDATE);
- hw_events->events[idx] = NULL;
- clear_bit(idx, hw_events->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static int
-armpmu_add(struct perf_event *event, int flags)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
- struct hw_perf_event *hwc = &event->hw;
- int idx;
- int err = 0;
-
- perf_pmu_disable(event->pmu);
-
- /* If we don't have a space for the counter then finish early. */
- idx = armpmu->get_event_idx(hw_events, hwc);
- if (idx < 0) {
- err = idx;
- goto out;
- }
-
- /*
- * If there is an event in the counter we are going to use then make
- * sure it is disabled.
- */
- event->hw.idx = idx;
- armpmu->disable(hwc, idx);
- hw_events->events[idx] = event;
-
- hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
- if (flags & PERF_EF_START)
- armpmu_start(event, PERF_EF_RELOAD);
-
- /* Propagate our changes to the userspace mapping. */
- perf_event_update_userpage(event);
-
-out:
- perf_pmu_enable(event->pmu);
- return err;
-}
-
-static int
-validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
- struct perf_event *event)
-{
- struct arm_pmu *armpmu;
- struct hw_perf_event fake_event = event->hw;
- struct pmu *leader_pmu = event->group_leader->pmu;
-
- if (is_software_event(event))
- return 1;
-
- /*
- * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
- * core perf code won't check that the pmu->ctx == leader->ctx
- * until after pmu->event_init(event).
- */
- if (event->pmu != pmu)
- return 0;
-
- if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
- return 1;
-
- if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
- return 1;
-
- armpmu = to_arm_pmu(event->pmu);
- return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
-}
-
-static int
-validate_group(struct perf_event *event)
-{
- struct perf_event *sibling, *leader = event->group_leader;
- struct pmu_hw_events fake_pmu;
- DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
-
- /*
- * Initialise the fake PMU. We only need to populate the
- * used_mask for the purposes of validation.
- */
- memset(fake_used_mask, 0, sizeof(fake_used_mask));
- fake_pmu.used_mask = fake_used_mask;
-
- if (!validate_event(event->pmu, &fake_pmu, leader))
- return -EINVAL;
-
- list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
- if (!validate_event(event->pmu, &fake_pmu, sibling))
- return -EINVAL;
- }
-
- if (!validate_event(event->pmu, &fake_pmu, event))
- return -EINVAL;
-
- return 0;
-}
-
-static void
-armpmu_disable_percpu_irq(void *data)
-{
- unsigned int irq = *(unsigned int *)data;
- disable_percpu_irq(irq);
-}
-
-static void
-armpmu_release_hardware(struct arm_pmu *armpmu)
-{
- int irq;
- unsigned int i, irqs;
- struct platform_device *pmu_device = armpmu->plat_device;
-
- irqs = min(pmu_device->num_resources, num_possible_cpus());
- if (!irqs)
- return;
-
- irq = platform_get_irq(pmu_device, 0);
- if (irq <= 0)
- return;
-
- if (irq_is_percpu(irq)) {
- on_each_cpu(armpmu_disable_percpu_irq, &irq, 1);
- free_percpu_irq(irq, &cpu_hw_events);
- } else {
- for (i = 0; i < irqs; ++i) {
- int cpu = i;
-
- if (armpmu->irq_affinity)
- cpu = armpmu->irq_affinity[i];
-
- if (!cpumask_test_and_clear_cpu(cpu, &armpmu->active_irqs))
- continue;
- irq = platform_get_irq(pmu_device, i);
- if (irq > 0)
- free_irq(irq, armpmu);
- }
- }
-}
-
-static void
-armpmu_enable_percpu_irq(void *data)
-{
- unsigned int irq = *(unsigned int *)data;
- enable_percpu_irq(irq, IRQ_TYPE_NONE);
-}
-
-static int
-armpmu_reserve_hardware(struct arm_pmu *armpmu)
-{
- int err, irq;
- unsigned int i, irqs;
- struct platform_device *pmu_device = armpmu->plat_device;
-
- if (!pmu_device)
- return -ENODEV;
-
- irqs = min(pmu_device->num_resources, num_possible_cpus());
- if (!irqs) {
- pr_err("no irqs for PMUs defined\n");
- return -ENODEV;
- }
-
- irq = platform_get_irq(pmu_device, 0);
- if (irq <= 0) {
- pr_err("failed to get valid irq for PMU device\n");
- return -ENODEV;
- }
-
- if (irq_is_percpu(irq)) {
- err = request_percpu_irq(irq, armpmu->handle_irq,
- "arm-pmu", &cpu_hw_events);
-
- if (err) {
- pr_err("unable to request percpu IRQ%d for ARM PMU counters\n",
- irq);
- armpmu_release_hardware(armpmu);
- return err;
- }
-
- on_each_cpu(armpmu_enable_percpu_irq, &irq, 1);
- } else {
- for (i = 0; i < irqs; ++i) {
- int cpu = i;
-
- err = 0;
- irq = platform_get_irq(pmu_device, i);
- if (irq <= 0)
- continue;
-
- if (armpmu->irq_affinity)
- cpu = armpmu->irq_affinity[i];
-
- /*
- * If we have a single PMU interrupt that we can't shift,
- * assume that we're running on a uniprocessor machine and
- * continue. Otherwise, continue without this interrupt.
- */
- if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) {
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- continue;
- }
-
- err = request_irq(irq, armpmu->handle_irq,
- IRQF_NOBALANCING | IRQF_NO_THREAD,
- "arm-pmu", armpmu);
- if (err) {
- pr_err("unable to request IRQ%d for ARM PMU counters\n",
- irq);
- armpmu_release_hardware(armpmu);
- return err;
- }
-
- cpumask_set_cpu(cpu, &armpmu->active_irqs);
- }
- }
-
- return 0;
-}
-
-static void
-hw_perf_event_destroy(struct perf_event *event)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- atomic_t *active_events = &armpmu->active_events;
- struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
-
- if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
- armpmu_release_hardware(armpmu);
- mutex_unlock(pmu_reserve_mutex);
- }
-}
-
-static int
-event_requires_mode_exclusion(struct perf_event_attr *attr)
-{
- return attr->exclude_idle || attr->exclude_user ||
- attr->exclude_kernel || attr->exclude_hv;
-}
-
-static int
-__hw_perf_event_init(struct perf_event *event)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hwc = &event->hw;
- int mapping, err;
-
- mapping = armpmu->map_event(event);
-
- if (mapping < 0) {
- pr_debug("event %x:%llx not supported\n", event->attr.type,
- event->attr.config);
- return mapping;
- }
-
- /*
- * We don't assign an index until we actually place the event onto
- * hardware. Use -1 to signify that we haven't decided where to put it
- * yet. For SMP systems, each core has it's own PMU so we can't do any
- * clever allocation or constraints checking at this point.
- */
- hwc->idx = -1;
- hwc->config_base = 0;
- hwc->config = 0;
- hwc->event_base = 0;
-
- /*
- * Check whether we need to exclude the counter from certain modes.
- */
- if ((!armpmu->set_event_filter ||
- armpmu->set_event_filter(hwc, &event->attr)) &&
- event_requires_mode_exclusion(&event->attr)) {
- pr_debug("ARM performance counters do not support mode exclusion\n");
- return -EPERM;
- }
-
- /*
- * Store the event encoding into the config_base field.
- */
- hwc->config_base |= (unsigned long)mapping;
-
- if (!hwc->sample_period) {
- /*
- * For non-sampling runs, limit the sample_period to half
- * of the counter width. That way, the new counter value
- * is far less likely to overtake the previous one unless
- * you have some serious IRQ latency issues.
- */
- hwc->sample_period = armpmu->max_period >> 1;
- hwc->last_period = hwc->sample_period;
- local64_set(&hwc->period_left, hwc->sample_period);
- }
-
- err = 0;
- if (event->group_leader != event) {
- err = validate_group(event);
- if (err)
- return -EINVAL;
- }
-
- return err;
-}
-
-static int armpmu_event_init(struct perf_event *event)
-{
- struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- int err = 0;
- atomic_t *active_events = &armpmu->active_events;
-
- if (armpmu->map_event(event) == -ENOENT)
- return -ENOENT;
-
- event->destroy = hw_perf_event_destroy;
-
- if (!atomic_inc_not_zero(active_events)) {
- mutex_lock(&armpmu->reserve_mutex);
- if (atomic_read(active_events) == 0)
- err = armpmu_reserve_hardware(armpmu);
-
- if (!err)
- atomic_inc(active_events);
- mutex_unlock(&armpmu->reserve_mutex);
- }
- if (err)
- return err;
-
- err = __hw_perf_event_init(event);
- if (err)
- hw_perf_event_destroy(event);
-
- return err;
-}
-
-static void armpmu_enable(struct pmu *pmu)
-{
- struct arm_pmu *armpmu = to_arm_pmu(pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
- int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
-
- if (enabled)
- armpmu->start();
-}
-
-static void armpmu_disable(struct pmu *pmu)
-{
- struct arm_pmu *armpmu = to_arm_pmu(pmu);
- armpmu->stop();
-}
-
-static void __init armpmu_init(struct arm_pmu *armpmu)
-{
- atomic_set(&armpmu->active_events, 0);
- mutex_init(&armpmu->reserve_mutex);
-
- armpmu->pmu = (struct pmu) {
- .pmu_enable = armpmu_enable,
- .pmu_disable = armpmu_disable,
- .event_init = armpmu_event_init,
- .add = armpmu_add,
- .del = armpmu_del,
- .start = armpmu_start,
- .stop = armpmu_stop,
- .read = armpmu_read,
- };
-}
-
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
-{
- armpmu_init(armpmu);
- return perf_pmu_register(&armpmu->pmu, name, type);
-}
+#include <linux/of.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/platform_device.h>
/*
* ARMv8 PMUv3 Performance Events handling code.
ARMV8_PMUV3_PERFCTR_BUS_CYCLES = 0x1D,
};
+/* ARMv8 Cortex-A53 specific event types. */
+enum armv8_a53_pmu_perf_types {
+ ARMV8_A53_PERFCTR_PREFETCH_LINEFILL = 0xC2,
+};
+
+/* ARMv8 Cortex-A57 specific event types. */
+enum armv8_a57_perf_types {
+ ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_LD = 0x40,
+ ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_ST = 0x41,
+ ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_LD = 0x42,
+ ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_ST = 0x43,
+ ARMV8_A57_PERFCTR_DTLB_REFILL_LD = 0x4c,
+ ARMV8_A57_PERFCTR_DTLB_REFILL_ST = 0x4d,
+};
+
/* PMUv3 HW events mapping. */
static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
PERF_MAP_ALL_UNSUPPORTED,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
};
+/* ARM Cortex-A53 HW events mapping. */
+static const unsigned armv8_a53_perf_map[PERF_COUNT_HW_MAX] = {
+ PERF_MAP_ALL_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
+};
+
+static const unsigned armv8_a57_perf_map[PERF_COUNT_HW_MAX] = {
+ PERF_MAP_ALL_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
+};
+
static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
};
+static const unsigned armv8_a53_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ PERF_CACHE_MAP_ALL_UNSUPPORTED,
+
+ [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+ [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+ [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+ [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+ [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_A53_PERFCTR_PREFETCH_LINEFILL,
+
+ [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS,
+ [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL,
+
+ [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_ITLB_REFILL,
+
+ [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+ [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+ [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+};
+
+static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ PERF_CACHE_MAP_ALL_UNSUPPORTED,
+
+ [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_LD,
+ [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_LD,
+ [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_ST,
+ [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_ST,
+
+ [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS,
+ [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL,
+
+ [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_A57_PERFCTR_DTLB_REFILL_LD,
+ [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_A57_PERFCTR_DTLB_REFILL_ST,
+
+ [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_ITLB_REFILL,
+
+ [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+ [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+ [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+};
+
+
/*
* Perf Events' indices
*/
#define ARMV8_IDX_CYCLE_COUNTER 0
#define ARMV8_IDX_COUNTER0 1
-#define ARMV8_IDX_COUNTER_LAST (ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
+#define ARMV8_IDX_COUNTER_LAST(cpu_pmu) \
+ (ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
#define ARMV8_MAX_COUNTERS 32
#define ARMV8_COUNTER_MASK (ARMV8_MAX_COUNTERS - 1)
return pmovsr & ARMV8_OVERFLOWED_MASK;
}
-static inline int armv8pmu_counter_valid(int idx)
+static inline int armv8pmu_counter_valid(struct arm_pmu *cpu_pmu, int idx)
{
- return idx >= ARMV8_IDX_CYCLE_COUNTER && idx <= ARMV8_IDX_COUNTER_LAST;
+ return idx >= ARMV8_IDX_CYCLE_COUNTER &&
+ idx <= ARMV8_IDX_COUNTER_LAST(cpu_pmu);
}
static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx)
{
- int ret = 0;
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), idx);
- } else {
- counter = ARMV8_IDX_TO_COUNTER(idx);
- ret = pmnc & BIT(counter);
- }
-
- return ret;
+ return pmnc & BIT(ARMV8_IDX_TO_COUNTER(idx));
}
static inline int armv8pmu_select_counter(int idx)
{
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u selecting wrong PMNC counter %d\n",
- smp_processor_id(), idx);
- return -EINVAL;
- }
-
- counter = ARMV8_IDX_TO_COUNTER(idx);
+ u32 counter = ARMV8_IDX_TO_COUNTER(idx);
asm volatile("msr pmselr_el0, %0" :: "r" (counter));
isb();
return idx;
}
-static inline u32 armv8pmu_read_counter(int idx)
+static inline u32 armv8pmu_read_counter(struct perf_event *event)
{
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
u32 value = 0;
- if (!armv8pmu_counter_valid(idx))
+ if (!armv8pmu_counter_valid(cpu_pmu, idx))
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
else if (idx == ARMV8_IDX_CYCLE_COUNTER)
return value;
}
-static inline void armv8pmu_write_counter(int idx, u32 value)
+static inline void armv8pmu_write_counter(struct perf_event *event, u32 value)
{
- if (!armv8pmu_counter_valid(idx))
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ if (!armv8pmu_counter_valid(cpu_pmu, idx))
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
else if (idx == ARMV8_IDX_CYCLE_COUNTER)
static inline int armv8pmu_enable_counter(int idx)
{
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u enabling wrong PMNC counter %d\n",
- smp_processor_id(), idx);
- return -EINVAL;
- }
-
- counter = ARMV8_IDX_TO_COUNTER(idx);
+ u32 counter = ARMV8_IDX_TO_COUNTER(idx);
asm volatile("msr pmcntenset_el0, %0" :: "r" (BIT(counter)));
return idx;
}
static inline int armv8pmu_disable_counter(int idx)
{
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u disabling wrong PMNC counter %d\n",
- smp_processor_id(), idx);
- return -EINVAL;
- }
-
- counter = ARMV8_IDX_TO_COUNTER(idx);
+ u32 counter = ARMV8_IDX_TO_COUNTER(idx);
asm volatile("msr pmcntenclr_el0, %0" :: "r" (BIT(counter)));
return idx;
}
static inline int armv8pmu_enable_intens(int idx)
{
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
- smp_processor_id(), idx);
- return -EINVAL;
- }
-
- counter = ARMV8_IDX_TO_COUNTER(idx);
+ u32 counter = ARMV8_IDX_TO_COUNTER(idx);
asm volatile("msr pmintenset_el1, %0" :: "r" (BIT(counter)));
return idx;
}
static inline int armv8pmu_disable_intens(int idx)
{
- u32 counter;
-
- if (!armv8pmu_counter_valid(idx)) {
- pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
- smp_processor_id(), idx);
- return -EINVAL;
- }
-
- counter = ARMV8_IDX_TO_COUNTER(idx);
+ u32 counter = ARMV8_IDX_TO_COUNTER(idx);
asm volatile("msr pmintenclr_el1, %0" :: "r" (BIT(counter)));
isb();
/* Clear the overflow flag in case an interrupt is pending. */
asm volatile("msr pmovsclr_el0, %0" :: "r" (BIT(counter)));
isb();
+
return idx;
}
return value;
}
-static void armv8pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void armv8pmu_enable_event(struct perf_event *event)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct hw_perf_event *hwc = &event->hw;
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+ int idx = hwc->idx;
/*
* Enable counter and interrupt, and set the counter to count
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static void armv8pmu_disable_event(struct hw_perf_event *hwc, int idx)
+static void armv8pmu_disable_event(struct perf_event *event)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct hw_perf_event *hwc = &event->hw;
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+ int idx = hwc->idx;
/*
* Disable counter and interrupt
{
u32 pmovsr;
struct perf_sample_data data;
- struct pmu_hw_events *cpuc;
+ struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
+ struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
struct pt_regs *regs;
int idx;
*/
regs = get_irq_regs();
- cpuc = this_cpu_ptr(&cpu_hw_events);
for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
+ armpmu_event_update(event);
perf_sample_data_init(&data, 0, hwc->last_period);
- if (!armpmu_event_set_period(event, hwc, idx))
+ if (!armpmu_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
- cpu_pmu->disable(hwc, idx);
+ cpu_pmu->disable(event);
}
/*
return IRQ_HANDLED;
}
-static void armv8pmu_start(void)
+static void armv8pmu_start(struct arm_pmu *cpu_pmu)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static void armv8pmu_stop(void)
+static void armv8pmu_stop(struct arm_pmu *cpu_pmu)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
}
static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
- struct hw_perf_event *event)
+ struct perf_event *event)
{
int idx;
- unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ unsigned long evtype = hwc->config_base & ARMV8_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
static void armv8pmu_reset(void *info)
{
+ struct arm_pmu *cpu_pmu = (struct arm_pmu *)info;
u32 idx, nb_cnt = cpu_pmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
- for (idx = ARMV8_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
- armv8pmu_disable_event(NULL, idx);
+ for (idx = ARMV8_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
+ armv8pmu_disable_counter(idx);
+ armv8pmu_disable_intens(idx);
+ }
/* Initialize & Reset PMNC: C and P bits. */
armv8pmu_pmcr_write(ARMV8_PMCR_P | ARMV8_PMCR_C);
static int armv8_pmuv3_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv8_pmuv3_perf_map,
+ return armpmu_map_event(event, &armv8_pmuv3_perf_map,
&armv8_pmuv3_perf_cache_map,
ARMV8_EVTYPE_EVENT);
}
-static struct arm_pmu armv8pmu = {
- .handle_irq = armv8pmu_handle_irq,
- .enable = armv8pmu_enable_event,
- .disable = armv8pmu_disable_event,
- .read_counter = armv8pmu_read_counter,
- .write_counter = armv8pmu_write_counter,
- .get_event_idx = armv8pmu_get_event_idx,
- .start = armv8pmu_start,
- .stop = armv8pmu_stop,
- .reset = armv8pmu_reset,
- .max_period = (1LLU << 32) - 1,
-};
+static int armv8_a53_map_event(struct perf_event *event)
+{
+ return armpmu_map_event(event, &armv8_a53_perf_map,
+ &armv8_a53_perf_cache_map,
+ ARMV8_EVTYPE_EVENT);
+}
-static u32 __init armv8pmu_read_num_pmnc_events(void)
+static int armv8_a57_map_event(struct perf_event *event)
{
- u32 nb_cnt;
+ return armpmu_map_event(event, &armv8_a57_perf_map,
+ &armv8_a57_perf_cache_map,
+ ARMV8_EVTYPE_EVENT);
+}
+
+static void armv8pmu_read_num_pmnc_events(void *info)
+{
+ int *nb_cnt = info;
/* Read the nb of CNTx counters supported from PMNC */
- nb_cnt = (armv8pmu_pmcr_read() >> ARMV8_PMCR_N_SHIFT) & ARMV8_PMCR_N_MASK;
+ *nb_cnt = (armv8pmu_pmcr_read() >> ARMV8_PMCR_N_SHIFT) & ARMV8_PMCR_N_MASK;
- /* Add the CPU cycles counter and return */
- return nb_cnt + 1;
+ /* Add the CPU cycles counter */
+ *nb_cnt += 1;
}
-static struct arm_pmu *__init armv8_pmuv3_pmu_init(void)
+static int armv8pmu_probe_num_events(struct arm_pmu *arm_pmu)
{
- armv8pmu.name = "arm/armv8-pmuv3";
- armv8pmu.map_event = armv8_pmuv3_map_event;
- armv8pmu.num_events = armv8pmu_read_num_pmnc_events();
- armv8pmu.set_event_filter = armv8pmu_set_event_filter;
- return &armv8pmu;
+ return smp_call_function_any(&arm_pmu->supported_cpus,
+ armv8pmu_read_num_pmnc_events,
+ &arm_pmu->num_events, 1);
}
-/*
- * Ensure the PMU has sane values out of reset.
- * This requires SMP to be available, so exists as a separate initcall.
- */
-static int __init
-cpu_pmu_reset(void)
+static void armv8_pmu_init(struct arm_pmu *cpu_pmu)
{
- if (cpu_pmu && cpu_pmu->reset)
- return on_each_cpu(cpu_pmu->reset, NULL, 1);
- return 0;
+ cpu_pmu->handle_irq = armv8pmu_handle_irq,
+ cpu_pmu->enable = armv8pmu_enable_event,
+ cpu_pmu->disable = armv8pmu_disable_event,
+ cpu_pmu->read_counter = armv8pmu_read_counter,
+ cpu_pmu->write_counter = armv8pmu_write_counter,
+ cpu_pmu->get_event_idx = armv8pmu_get_event_idx,
+ cpu_pmu->start = armv8pmu_start,
+ cpu_pmu->stop = armv8pmu_stop,
+ cpu_pmu->reset = armv8pmu_reset,
+ cpu_pmu->max_period = (1LLU << 32) - 1,
+ cpu_pmu->set_event_filter = armv8pmu_set_event_filter;
}
-arch_initcall(cpu_pmu_reset);
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static const struct of_device_id armpmu_of_device_ids[] = {
- {.compatible = "arm,armv8-pmuv3"},
- {},
-};
-static int armpmu_device_probe(struct platform_device *pdev)
+static int armv8_pmuv3_init(struct arm_pmu *cpu_pmu)
{
- int i, irq, *irqs;
-
- if (!cpu_pmu)
- return -ENODEV;
-
- /* Don't bother with PPIs; they're already affine */
- irq = platform_get_irq(pdev, 0);
- if (irq >= 0 && irq_is_percpu(irq))
- goto out;
-
- irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
- if (!irqs)
- return -ENOMEM;
-
- for (i = 0; i < pdev->num_resources; ++i) {
- struct device_node *dn;
- int cpu;
-
- dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity",
- i);
- if (!dn) {
- pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(pdev->dev.of_node), i);
- break;
- }
-
- for_each_possible_cpu(cpu)
- if (dn == of_cpu_device_node_get(cpu))
- break;
-
- if (cpu >= nr_cpu_ids) {
- pr_warn("Failed to find logical CPU for %s\n",
- dn->name);
- of_node_put(dn);
- break;
- }
- of_node_put(dn);
-
- irqs[i] = cpu;
- }
-
- if (i == pdev->num_resources)
- cpu_pmu->irq_affinity = irqs;
- else
- kfree(irqs);
-
-out:
- cpu_pmu->plat_device = pdev;
- return 0;
+ armv8_pmu_init(cpu_pmu);
+ cpu_pmu->name = "armv8_pmuv3";
+ cpu_pmu->map_event = armv8_pmuv3_map_event;
+ return armv8pmu_probe_num_events(cpu_pmu);
}
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
-};
-
-static int __init register_pmu_driver(void)
+static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu)
{
- return platform_driver_register(&armpmu_driver);
+ armv8_pmu_init(cpu_pmu);
+ cpu_pmu->name = "armv8_cortex_a53";
+ cpu_pmu->map_event = armv8_a53_map_event;
+ return armv8pmu_probe_num_events(cpu_pmu);
}
-device_initcall(register_pmu_driver);
-static struct pmu_hw_events *armpmu_get_cpu_events(void)
+static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu)
{
- return this_cpu_ptr(&cpu_hw_events);
+ armv8_pmu_init(cpu_pmu);
+ cpu_pmu->name = "armv8_cortex_a57";
+ cpu_pmu->map_event = armv8_a57_map_event;
+ return armv8pmu_probe_num_events(cpu_pmu);
}
-static void __init cpu_pmu_init(struct arm_pmu *armpmu)
-{
- int cpu;
- for_each_possible_cpu(cpu) {
- struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
- events->events = per_cpu(hw_events, cpu);
- events->used_mask = per_cpu(used_mask, cpu);
- raw_spin_lock_init(&events->pmu_lock);
- }
- armpmu->get_hw_events = armpmu_get_cpu_events;
-}
+static const struct of_device_id armv8_pmu_of_device_ids[] = {
+ {.compatible = "arm,armv8-pmuv3", .data = armv8_pmuv3_init},
+ {.compatible = "arm,cortex-a53-pmu", .data = armv8_a53_pmu_init},
+ {.compatible = "arm,cortex-a57-pmu", .data = armv8_a57_pmu_init},
+ {},
+};
-static int __init init_hw_perf_events(void)
+static int armv8_pmu_device_probe(struct platform_device *pdev)
{
- u64 dfr = read_cpuid(ID_AA64DFR0_EL1);
-
- switch ((dfr >> 8) & 0xf) {
- case 0x1: /* PMUv3 */
- cpu_pmu = armv8_pmuv3_pmu_init();
- break;
- }
+ return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL);
+}
- if (cpu_pmu) {
- pr_info("enabled with %s PMU driver, %d counters available\n",
- cpu_pmu->name, cpu_pmu->num_events);
- cpu_pmu_init(cpu_pmu);
- armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
- } else {
- pr_info("no hardware support available\n");
- }
+static struct platform_driver armv8_pmu_driver = {
+ .driver = {
+ .name = "armv8-pmu",
+ .of_match_table = armv8_pmu_of_device_ids,
+ },
+ .probe = armv8_pmu_device_probe,
+};
- return 0;
+static int __init register_armv8_pmu_driver(void)
+{
+ return platform_driver_register(&armv8_pmu_driver);
}
-early_initcall(init_hw_perf_events);
-
+device_initcall(register_armv8_pmu_driver);
#include <linux/hw_breakpoint.h>
#include <linux/personality.h>
#include <linux/notifier.h>
+#include <trace/events/power.h>
#include <asm/compat.h>
#include <asm/cacheflush.h>
* This should do all the clock switching and wait for interrupt
* tricks
*/
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
cpu_do_idle();
local_irq_enable();
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_HOTPLUG_CPU
#include <asm/smp_plat.h>
#include <asm/suspend.h>
-static bool psci_power_state_loses_context(u32 state)
-{
- return state & PSCI_0_2_POWER_STATE_TYPE_MASK;
-}
-
-static bool psci_power_state_is_valid(u32 state)
-{
- const u32 valid_mask = PSCI_0_2_POWER_STATE_ID_MASK |
- PSCI_0_2_POWER_STATE_TYPE_MASK |
- PSCI_0_2_POWER_STATE_AFFL_MASK;
-
- return !(state & ~valid_mask);
-}
-
static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
static int __maybe_unused cpu_psci_cpu_init_idle(unsigned int cpu)
#include <linux/console.h>
#include <linux/cache.h>
#include <linux/bootmem.h>
-#include <linux/seq_file.h>
#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/kexec.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/efi.h>
-#include <linux/personality.h>
#include <linux/psci.h>
#include <asm/acpi.h>
#include <asm/elf.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
+#include <asm/kasan.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp_plat.h>
#include <asm/efi.h>
#include <asm/xen/hypervisor.h>
-unsigned long elf_hwcap __read_mostly;
-EXPORT_SYMBOL_GPL(elf_hwcap);
-
-#ifdef CONFIG_COMPAT
-#define COMPAT_ELF_HWCAP_DEFAULT \
- (COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
- COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
- COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
- COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
- COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\
- COMPAT_HWCAP_LPAE)
-unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
-unsigned int compat_elf_hwcap2 __read_mostly;
-#endif
-
-DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
-
phys_addr_t __fdt_pointer __initdata;
/*
__flush_dcache_area(&mpidr_hash, sizeof(struct mpidr_hash));
}
-static void __init setup_processor(void)
-{
- u64 features;
- s64 block;
- u32 cwg;
- int cls;
-
- printk("CPU: AArch64 Processor [%08x] revision %d\n",
- read_cpuid_id(), read_cpuid_id() & 15);
-
- sprintf(init_utsname()->machine, ELF_PLATFORM);
- elf_hwcap = 0;
-
- cpuinfo_store_boot_cpu();
-
- /*
- * Check for sane CTR_EL0.CWG value.
- */
- cwg = cache_type_cwg();
- cls = cache_line_size();
- if (!cwg)
- pr_warn("No Cache Writeback Granule information, assuming cache line size %d\n",
- cls);
- if (L1_CACHE_BYTES < cls)
- pr_warn("L1_CACHE_BYTES smaller than the Cache Writeback Granule (%d < %d)\n",
- L1_CACHE_BYTES, cls);
-
- /*
- * ID_AA64ISAR0_EL1 contains 4-bit wide signed feature blocks.
- * The blocks we test below represent incremental functionality
- * for non-negative values. Negative values are reserved.
- */
- features = read_cpuid(ID_AA64ISAR0_EL1);
- block = cpuid_feature_extract_field(features, 4);
- if (block > 0) {
- switch (block) {
- default:
- case 2:
- elf_hwcap |= HWCAP_PMULL;
- case 1:
- elf_hwcap |= HWCAP_AES;
- case 0:
- break;
- }
- }
-
- if (cpuid_feature_extract_field(features, 8) > 0)
- elf_hwcap |= HWCAP_SHA1;
-
- if (cpuid_feature_extract_field(features, 12) > 0)
- elf_hwcap |= HWCAP_SHA2;
-
- if (cpuid_feature_extract_field(features, 16) > 0)
- elf_hwcap |= HWCAP_CRC32;
-
- block = cpuid_feature_extract_field(features, 20);
- if (block > 0) {
- switch (block) {
- default:
- case 2:
- elf_hwcap |= HWCAP_ATOMICS;
- case 1:
- /* RESERVED */
- case 0:
- break;
- }
- }
-
-#ifdef CONFIG_COMPAT
- /*
- * ID_ISAR5_EL1 carries similar information as above, but pertaining to
- * the AArch32 32-bit execution state.
- */
- features = read_cpuid(ID_ISAR5_EL1);
- block = cpuid_feature_extract_field(features, 4);
- if (block > 0) {
- switch (block) {
- default:
- case 2:
- compat_elf_hwcap2 |= COMPAT_HWCAP2_PMULL;
- case 1:
- compat_elf_hwcap2 |= COMPAT_HWCAP2_AES;
- case 0:
- break;
- }
- }
-
- if (cpuid_feature_extract_field(features, 8) > 0)
- compat_elf_hwcap2 |= COMPAT_HWCAP2_SHA1;
-
- if (cpuid_feature_extract_field(features, 12) > 0)
- compat_elf_hwcap2 |= COMPAT_HWCAP2_SHA2;
-
- if (cpuid_feature_extract_field(features, 16) > 0)
- compat_elf_hwcap2 |= COMPAT_HWCAP2_CRC32;
-#endif
-}
-
static void __init setup_machine_fdt(phys_addr_t dt_phys)
{
void *dt_virt = fixmap_remap_fdt(dt_phys);
void __init setup_arch(char **cmdline_p)
{
- setup_processor();
+ pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
+ sprintf(init_utsname()->machine, ELF_PLATFORM);
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
paging_init();
relocate_initrd();
+
+ kasan_init();
+
request_standard_resources();
early_ioremap_reset();
return 0;
}
subsys_initcall(topology_init);
-
-static const char *hwcap_str[] = {
- "fp",
- "asimd",
- "evtstrm",
- "aes",
- "pmull",
- "sha1",
- "sha2",
- "crc32",
- "atomics",
- NULL
-};
-
-#ifdef CONFIG_COMPAT
-static const char *compat_hwcap_str[] = {
- "swp",
- "half",
- "thumb",
- "26bit",
- "fastmult",
- "fpa",
- "vfp",
- "edsp",
- "java",
- "iwmmxt",
- "crunch",
- "thumbee",
- "neon",
- "vfpv3",
- "vfpv3d16",
- "tls",
- "vfpv4",
- "idiva",
- "idivt",
- "vfpd32",
- "lpae",
- "evtstrm"
-};
-
-static const char *compat_hwcap2_str[] = {
- "aes",
- "pmull",
- "sha1",
- "sha2",
- "crc32",
- NULL
-};
-#endif /* CONFIG_COMPAT */
-
-static int c_show(struct seq_file *m, void *v)
-{
- int i, j;
-
- for_each_online_cpu(i) {
- struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
- u32 midr = cpuinfo->reg_midr;
-
- /*
- * glibc reads /proc/cpuinfo to determine the number of
- * online processors, looking for lines beginning with
- * "processor". Give glibc what it expects.
- */
- seq_printf(m, "processor\t: %d\n", i);
-
- /*
- * Dump out the common processor features in a single line.
- * Userspace should read the hwcaps with getauxval(AT_HWCAP)
- * rather than attempting to parse this, but there's a body of
- * software which does already (at least for 32-bit).
- */
- seq_puts(m, "Features\t:");
- if (personality(current->personality) == PER_LINUX32) {
-#ifdef CONFIG_COMPAT
- for (j = 0; compat_hwcap_str[j]; j++)
- if (compat_elf_hwcap & (1 << j))
- seq_printf(m, " %s", compat_hwcap_str[j]);
-
- for (j = 0; compat_hwcap2_str[j]; j++)
- if (compat_elf_hwcap2 & (1 << j))
- seq_printf(m, " %s", compat_hwcap2_str[j]);
-#endif /* CONFIG_COMPAT */
- } else {
- for (j = 0; hwcap_str[j]; j++)
- if (elf_hwcap & (1 << j))
- seq_printf(m, " %s", hwcap_str[j]);
- }
- seq_puts(m, "\n");
-
- seq_printf(m, "CPU implementer\t: 0x%02x\n",
- MIDR_IMPLEMENTOR(midr));
- seq_printf(m, "CPU architecture: 8\n");
- seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
- seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
- seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
- }
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = c_show
-};
*/
atomic_inc(&mm->mm_count);
current->active_mm = mm;
- cpumask_set_cpu(cpu, mm_cpumask(mm));
set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
- printk("CPU%u: Booted secondary processor\n", cpu);
/*
* TTBR0 is only used for the identity mapping at this stage. Make it
* point to zero page to avoid speculatively fetching new entries.
*/
cpu_set_reserved_ttbr0();
- flush_tlb_all();
+ local_flush_tlb_all();
cpu_set_default_tcr_t0sz();
preempt_disable();
trace_hardirqs_off();
+ /*
+ * If the system has established the capabilities, make sure
+ * this CPU ticks all of those. If it doesn't, the CPU will
+ * fail to come online.
+ */
+ verify_local_cpu_capabilities();
+
if (cpu_ops[cpu]->cpu_postboot)
cpu_ops[cpu]->cpu_postboot();
* the CPU migration code to notice that the CPU is online
* before we continue.
*/
+ pr_info("CPU%u: Booted secondary processor [%08x]\n",
+ cpu, read_cpuid_id());
set_cpu_online(cpu, true);
complete(&cpu_running);
/*
* OK - migrate IRQs away from this CPU
*/
- migrate_irqs();
-
- /*
- * Remove this CPU from the vm mask set of all processes.
- */
- clear_tasks_mm_cpumask(cpu);
+ irq_migrate_all_off_this_cpu();
return 0;
}
void __init smp_cpus_done(unsigned int max_cpus)
{
pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
+ setup_cpu_features();
hyp_mode_check();
apply_alternatives_all();
}
void __init smp_prepare_boot_cpu(void)
{
+ cpuinfo_store_boot_cpu();
set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
}
frame->sp = fp + 0x10;
frame->fp = *(unsigned long *)(fp);
- /*
- * -4 here because we care about the PC at time of bl,
- * not where the return will go.
- */
- frame->pc = *(unsigned long *)(fp + 8) - 4;
+ frame->pc = *(unsigned long *)(fp + 8);
return 0;
}
if (ret == 0) {
/*
* We are resuming from reset with TTBR0_EL1 set to the
- * idmap to enable the MMU; restore the active_mm mappings in
- * TTBR0_EL1 unless the active_mm == &init_mm, in which case
- * the thread entered cpu_suspend with TTBR0_EL1 set to
- * reserved TTBR0 page tables and should be restored as such.
+ * idmap to enable the MMU; set the TTBR0 to the reserved
+ * page tables to prevent speculative TLB allocations, flush
+ * the local tlb and set the default tcr_el1.t0sz so that
+ * the TTBR0 address space set-up is properly restored.
+ * If the current active_mm != &init_mm we entered cpu_suspend
+ * with mappings in TTBR0 that must be restored, so we switch
+ * them back to complete the address space configuration
+ * restoration before returning.
*/
- if (mm == &init_mm)
- cpu_set_reserved_ttbr0();
- else
- cpu_switch_mm(mm->pgd, mm);
+ cpu_set_reserved_ttbr0();
+ local_flush_tlb_all();
+ cpu_set_default_tcr_t0sz();
- flush_tlb_all();
+ if (mm != &init_mm)
+ cpu_switch_mm(mm->pgd, mm);
/*
* Restore per-cpu offset before any kernel
set_fs(fs);
}
-static void dump_backtrace_entry(unsigned long where, unsigned long stack)
+static void dump_backtrace_entry(unsigned long where)
{
+ /*
+ * Note that 'where' can have a physical address, but it's not handled.
+ */
print_ip_sym(where);
- if (in_exception_text(where))
- dump_mem("", "Exception stack", stack,
- stack + sizeof(struct pt_regs), false);
}
static void dump_instr(const char *lvl, struct pt_regs *regs)
pr_emerg("Call trace:\n");
while (1) {
unsigned long where = frame.pc;
+ unsigned long stack;
int ret;
+ dump_backtrace_entry(where);
ret = unwind_frame(&frame);
if (ret < 0)
break;
- dump_backtrace_entry(where, frame.sp);
+ stack = frame.sp;
+ if (in_exception_text(where))
+ dump_mem("", "Exception stack", stack,
+ stack + sizeof(struct pt_regs), false);
}
}
*/
#include <asm-generic/vmlinux.lds.h>
+#include <asm/kernel-pgtable.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
#define PECOFF_EDATA_PADDING
#endif
-#ifdef CONFIG_DEBUG_ALIGN_RODATA
+#if defined(CONFIG_DEBUG_ALIGN_RODATA)
#define ALIGN_DEBUG_RO . = ALIGN(1<<SECTION_SHIFT);
#define ALIGN_DEBUG_RO_MIN(min) ALIGN_DEBUG_RO
+#elif defined(CONFIG_DEBUG_RODATA)
+#define ALIGN_DEBUG_RO . = ALIGN(1<<PAGE_SHIFT);
+#define ALIGN_DEBUG_RO_MIN(min) ALIGN_DEBUG_RO
#else
#define ALIGN_DEBUG_RO
#define ALIGN_DEBUG_RO_MIN(min) . = ALIGN(min);
config KVM
bool "Kernel-based Virtual Machine (KVM) support"
depends on OF
+ depends on !ARM64_16K_PAGES
select MMU_NOTIFIER
select PREEMPT_NOTIFIERS
select ANON_INODES
select HAVE_KVM_IRQFD
---help---
Support hosting virtualized guest machines.
+ We don't support KVM with 16K page tables yet, due to the multiple
+ levels of fake page tables.
If unsure, say N.
{
u64 pfr0;
- pfr0 = read_cpuid(ID_AA64PFR0_EL1);
+ pfr0 = read_system_reg(SYS_ID_AA64PFR0_EL1);
return !!(pfr0 & 0x20);
}
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
- u64 dfr = read_cpuid(ID_AA64DFR0_EL1);
- u64 pfr = read_cpuid(ID_AA64PFR0_EL1);
- u32 el3 = !!((pfr >> 12) & 0xf);
+ u64 dfr = read_system_reg(SYS_ID_AA64DFR0_EL1);
+ u64 pfr = read_system_reg(SYS_ID_AA64PFR0_EL1);
+ u32 el3 = !!cpuid_feature_extract_field(pfr, ID_AA64PFR0_EL3_SHIFT);
- *vcpu_reg(vcpu, p->Rt) = ((((dfr >> 20) & 0xf) << 28) |
- (((dfr >> 12) & 0xf) << 24) |
- (((dfr >> 28) & 0xf) << 20) |
+ *vcpu_reg(vcpu, p->Rt) = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) |
+ (((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) |
+ (((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20) |
(6 << 16) | (el3 << 14) | (el3 << 12));
return true;
}
#include <asm/alternative.h>
#include <asm/assembler.h>
+#include <asm/cache.h>
#include <asm/cpufeature.h>
#include <asm/sysreg.h>
* Returns:
* x0 - bytes not copied
*/
+
+ .macro ldrb1 ptr, regB, val
+ USER(9998f, ldrb \ptr, [\regB], \val)
+ .endm
+
+ .macro strb1 ptr, regB, val
+ strb \ptr, [\regB], \val
+ .endm
+
+ .macro ldrh1 ptr, regB, val
+ USER(9998f, ldrh \ptr, [\regB], \val)
+ .endm
+
+ .macro strh1 ptr, regB, val
+ strh \ptr, [\regB], \val
+ .endm
+
+ .macro ldr1 ptr, regB, val
+ USER(9998f, ldr \ptr, [\regB], \val)
+ .endm
+
+ .macro str1 ptr, regB, val
+ str \ptr, [\regB], \val
+ .endm
+
+ .macro ldp1 ptr, regB, regC, val
+ USER(9998f, ldp \ptr, \regB, [\regC], \val)
+ .endm
+
+ .macro stp1 ptr, regB, regC, val
+ stp \ptr, \regB, [\regC], \val
+ .endm
+
+end .req x5
ENTRY(__copy_from_user)
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
- add x5, x1, x2 // upper user buffer boundary
- subs x2, x2, #16
- b.mi 1f
-0:
-USER(9f, ldp x3, x4, [x1], #16)
- subs x2, x2, #16
- stp x3, x4, [x0], #16
- b.pl 0b
-1: adds x2, x2, #8
- b.mi 2f
-USER(9f, ldr x3, [x1], #8 )
- sub x2, x2, #8
- str x3, [x0], #8
-2: adds x2, x2, #4
- b.mi 3f
-USER(9f, ldr w3, [x1], #4 )
- sub x2, x2, #4
- str w3, [x0], #4
-3: adds x2, x2, #2
- b.mi 4f
-USER(9f, ldrh w3, [x1], #2 )
- sub x2, x2, #2
- strh w3, [x0], #2
-4: adds x2, x2, #1
- b.mi 5f
-USER(9f, ldrb w3, [x1] )
- strb w3, [x0]
-5: mov x0, #0
+ add end, x0, x2
+#include "copy_template.S"
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
+ mov x0, #0 // Nothing to copy
ret
ENDPROC(__copy_from_user)
.section .fixup,"ax"
.align 2
-9: sub x2, x5, x1
- mov x3, x2
-10: strb wzr, [x0], #1 // zero remaining buffer space
- subs x3, x3, #1
- b.ne 10b
- mov x0, x2 // bytes not copied
+9998:
+ sub x0, end, dst
+9999:
+ strb wzr, [dst], #1 // zero remaining buffer space
+ cmp dst, end
+ b.lo 9999b
ret
.previous
#include <asm/alternative.h>
#include <asm/assembler.h>
+#include <asm/cache.h>
#include <asm/cpufeature.h>
#include <asm/sysreg.h>
* Returns:
* x0 - bytes not copied
*/
+ .macro ldrb1 ptr, regB, val
+ USER(9998f, ldrb \ptr, [\regB], \val)
+ .endm
+
+ .macro strb1 ptr, regB, val
+ USER(9998f, strb \ptr, [\regB], \val)
+ .endm
+
+ .macro ldrh1 ptr, regB, val
+ USER(9998f, ldrh \ptr, [\regB], \val)
+ .endm
+
+ .macro strh1 ptr, regB, val
+ USER(9998f, strh \ptr, [\regB], \val)
+ .endm
+
+ .macro ldr1 ptr, regB, val
+ USER(9998f, ldr \ptr, [\regB], \val)
+ .endm
+
+ .macro str1 ptr, regB, val
+ USER(9998f, str \ptr, [\regB], \val)
+ .endm
+
+ .macro ldp1 ptr, regB, regC, val
+ USER(9998f, ldp \ptr, \regB, [\regC], \val)
+ .endm
+
+ .macro stp1 ptr, regB, regC, val
+ USER(9998f, stp \ptr, \regB, [\regC], \val)
+ .endm
+
+end .req x5
ENTRY(__copy_in_user)
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
- add x5, x0, x2 // upper user buffer boundary
- subs x2, x2, #16
- b.mi 1f
-0:
-USER(9f, ldp x3, x4, [x1], #16)
- subs x2, x2, #16
-USER(9f, stp x3, x4, [x0], #16)
- b.pl 0b
-1: adds x2, x2, #8
- b.mi 2f
-USER(9f, ldr x3, [x1], #8 )
- sub x2, x2, #8
-USER(9f, str x3, [x0], #8 )
-2: adds x2, x2, #4
- b.mi 3f
-USER(9f, ldr w3, [x1], #4 )
- sub x2, x2, #4
-USER(9f, str w3, [x0], #4 )
-3: adds x2, x2, #2
- b.mi 4f
-USER(9f, ldrh w3, [x1], #2 )
- sub x2, x2, #2
-USER(9f, strh w3, [x0], #2 )
-4: adds x2, x2, #1
- b.mi 5f
-USER(9f, ldrb w3, [x1] )
-USER(9f, strb w3, [x0] )
-5: mov x0, #0
+ add end, x0, x2
+#include "copy_template.S"
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
+ mov x0, #0
ret
ENDPROC(__copy_in_user)
.section .fixup,"ax"
.align 2
-9: sub x0, x5, x0 // bytes not copied
+9998: sub x0, end, dst // bytes not copied
ret
.previous
--- /dev/null
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * and re-licensed under GPLv2 for the Linux kernel. The original code can
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/*
+ * Copy a buffer from src to dest (alignment handled by the hardware)
+ *
+ * Parameters:
+ * x0 - dest
+ * x1 - src
+ * x2 - n
+ * Returns:
+ * x0 - dest
+ */
+dstin .req x0
+src .req x1
+count .req x2
+tmp1 .req x3
+tmp1w .req w3
+tmp2 .req x4
+tmp2w .req w4
+dst .req x6
+
+A_l .req x7
+A_h .req x8
+B_l .req x9
+B_h .req x10
+C_l .req x11
+C_h .req x12
+D_l .req x13
+D_h .req x14
+
+ mov dst, dstin
+ cmp count, #16
+ /*When memory length is less than 16, the accessed are not aligned.*/
+ b.lo .Ltiny15
+
+ neg tmp2, src
+ ands tmp2, tmp2, #15/* Bytes to reach alignment. */
+ b.eq .LSrcAligned
+ sub count, count, tmp2
+ /*
+ * Copy the leading memory data from src to dst in an increasing
+ * address order.By this way,the risk of overwritting the source
+ * memory data is eliminated when the distance between src and
+ * dst is less than 16. The memory accesses here are alignment.
+ */
+ tbz tmp2, #0, 1f
+ ldrb1 tmp1w, src, #1
+ strb1 tmp1w, dst, #1
+1:
+ tbz tmp2, #1, 2f
+ ldrh1 tmp1w, src, #2
+ strh1 tmp1w, dst, #2
+2:
+ tbz tmp2, #2, 3f
+ ldr1 tmp1w, src, #4
+ str1 tmp1w, dst, #4
+3:
+ tbz tmp2, #3, .LSrcAligned
+ ldr1 tmp1, src, #8
+ str1 tmp1, dst, #8
+
+.LSrcAligned:
+ cmp count, #64
+ b.ge .Lcpy_over64
+ /*
+ * Deal with small copies quickly by dropping straight into the
+ * exit block.
+ */
+.Ltail63:
+ /*
+ * Copy up to 48 bytes of data. At this point we only need the
+ * bottom 6 bits of count to be accurate.
+ */
+ ands tmp1, count, #0x30
+ b.eq .Ltiny15
+ cmp tmp1w, #0x20
+ b.eq 1f
+ b.lt 2f
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+1:
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+2:
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+.Ltiny15:
+ /*
+ * Prefer to break one ldp/stp into several load/store to access
+ * memory in an increasing address order,rather than to load/store 16
+ * bytes from (src-16) to (dst-16) and to backward the src to aligned
+ * address,which way is used in original cortex memcpy. If keeping
+ * the original memcpy process here, memmove need to satisfy the
+ * precondition that src address is at least 16 bytes bigger than dst
+ * address,otherwise some source data will be overwritten when memove
+ * call memcpy directly. To make memmove simpler and decouple the
+ * memcpy's dependency on memmove, withdrew the original process.
+ */
+ tbz count, #3, 1f
+ ldr1 tmp1, src, #8
+ str1 tmp1, dst, #8
+1:
+ tbz count, #2, 2f
+ ldr1 tmp1w, src, #4
+ str1 tmp1w, dst, #4
+2:
+ tbz count, #1, 3f
+ ldrh1 tmp1w, src, #2
+ strh1 tmp1w, dst, #2
+3:
+ tbz count, #0, .Lexitfunc
+ ldrb1 tmp1w, src, #1
+ strb1 tmp1w, dst, #1
+
+ b .Lexitfunc
+
+.Lcpy_over64:
+ subs count, count, #128
+ b.ge .Lcpy_body_large
+ /*
+ * Less than 128 bytes to copy, so handle 64 here and then jump
+ * to the tail.
+ */
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+ ldp1 B_l, B_h, src, #16
+ ldp1 C_l, C_h, src, #16
+ stp1 B_l, B_h, dst, #16
+ stp1 C_l, C_h, dst, #16
+ ldp1 D_l, D_h, src, #16
+ stp1 D_l, D_h, dst, #16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+ b .Lexitfunc
+
+ /*
+ * Critical loop. Start at a new cache line boundary. Assuming
+ * 64 bytes per line this ensures the entire loop is in one line.
+ */
+ .p2align L1_CACHE_SHIFT
+.Lcpy_body_large:
+ /* pre-get 64 bytes data. */
+ ldp1 A_l, A_h, src, #16
+ ldp1 B_l, B_h, src, #16
+ ldp1 C_l, C_h, src, #16
+ ldp1 D_l, D_h, src, #16
+1:
+ /*
+ * interlace the load of next 64 bytes data block with store of the last
+ * loaded 64 bytes data.
+ */
+ stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #16
+ stp1 B_l, B_h, dst, #16
+ ldp1 B_l, B_h, src, #16
+ stp1 C_l, C_h, dst, #16
+ ldp1 C_l, C_h, src, #16
+ stp1 D_l, D_h, dst, #16
+ ldp1 D_l, D_h, src, #16
+ subs count, count, #64
+ b.ge 1b
+ stp1 A_l, A_h, dst, #16
+ stp1 B_l, B_h, dst, #16
+ stp1 C_l, C_h, dst, #16
+ stp1 D_l, D_h, dst, #16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+.Lexitfunc:
#include <asm/alternative.h>
#include <asm/assembler.h>
+#include <asm/cache.h>
#include <asm/cpufeature.h>
#include <asm/sysreg.h>
* Returns:
* x0 - bytes not copied
*/
+ .macro ldrb1 ptr, regB, val
+ ldrb \ptr, [\regB], \val
+ .endm
+
+ .macro strb1 ptr, regB, val
+ USER(9998f, strb \ptr, [\regB], \val)
+ .endm
+
+ .macro ldrh1 ptr, regB, val
+ ldrh \ptr, [\regB], \val
+ .endm
+
+ .macro strh1 ptr, regB, val
+ USER(9998f, strh \ptr, [\regB], \val)
+ .endm
+
+ .macro ldr1 ptr, regB, val
+ ldr \ptr, [\regB], \val
+ .endm
+
+ .macro str1 ptr, regB, val
+ USER(9998f, str \ptr, [\regB], \val)
+ .endm
+
+ .macro ldp1 ptr, regB, regC, val
+ ldp \ptr, \regB, [\regC], \val
+ .endm
+
+ .macro stp1 ptr, regB, regC, val
+ USER(9998f, stp \ptr, \regB, [\regC], \val)
+ .endm
+
+end .req x5
ENTRY(__copy_to_user)
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
- add x5, x0, x2 // upper user buffer boundary
- subs x2, x2, #16
- b.mi 1f
-0:
- ldp x3, x4, [x1], #16
- subs x2, x2, #16
-USER(9f, stp x3, x4, [x0], #16)
- b.pl 0b
-1: adds x2, x2, #8
- b.mi 2f
- ldr x3, [x1], #8
- sub x2, x2, #8
-USER(9f, str x3, [x0], #8 )
-2: adds x2, x2, #4
- b.mi 3f
- ldr w3, [x1], #4
- sub x2, x2, #4
-USER(9f, str w3, [x0], #4 )
-3: adds x2, x2, #2
- b.mi 4f
- ldrh w3, [x1], #2
- sub x2, x2, #2
-USER(9f, strh w3, [x0], #2 )
-4: adds x2, x2, #1
- b.mi 5f
- ldrb w3, [x1]
-USER(9f, strb w3, [x0] )
-5: mov x0, #0
+ add end, x0, x2
+#include "copy_template.S"
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN)
+ mov x0, #0
ret
ENDPROC(__copy_to_user)
.section .fixup,"ax"
.align 2
-9: sub x0, x5, x0 // bytes not copied
+9998: sub x0, end, dst // bytes not copied
ret
.previous
ret
2: mov x0, #0
ret
-ENDPROC(memchr)
+ENDPIPROC(memchr)
.Lret0:
mov result, #0
ret
-ENDPROC(memcmp)
+ENDPIPROC(memcmp)
* Returns:
* x0 - dest
*/
-dstin .req x0
-src .req x1
-count .req x2
-tmp1 .req x3
-tmp1w .req w3
-tmp2 .req x4
-tmp2w .req w4
-tmp3 .req x5
-tmp3w .req w5
-dst .req x6
+ .macro ldrb1 ptr, regB, val
+ ldrb \ptr, [\regB], \val
+ .endm
-A_l .req x7
-A_h .req x8
-B_l .req x9
-B_h .req x10
-C_l .req x11
-C_h .req x12
-D_l .req x13
-D_h .req x14
+ .macro strb1 ptr, regB, val
+ strb \ptr, [\regB], \val
+ .endm
-ENTRY(memcpy)
- mov dst, dstin
- cmp count, #16
- /*When memory length is less than 16, the accessed are not aligned.*/
- b.lo .Ltiny15
+ .macro ldrh1 ptr, regB, val
+ ldrh \ptr, [\regB], \val
+ .endm
- neg tmp2, src
- ands tmp2, tmp2, #15/* Bytes to reach alignment. */
- b.eq .LSrcAligned
- sub count, count, tmp2
- /*
- * Copy the leading memory data from src to dst in an increasing
- * address order.By this way,the risk of overwritting the source
- * memory data is eliminated when the distance between src and
- * dst is less than 16. The memory accesses here are alignment.
- */
- tbz tmp2, #0, 1f
- ldrb tmp1w, [src], #1
- strb tmp1w, [dst], #1
-1:
- tbz tmp2, #1, 2f
- ldrh tmp1w, [src], #2
- strh tmp1w, [dst], #2
-2:
- tbz tmp2, #2, 3f
- ldr tmp1w, [src], #4
- str tmp1w, [dst], #4
-3:
- tbz tmp2, #3, .LSrcAligned
- ldr tmp1, [src],#8
- str tmp1, [dst],#8
+ .macro strh1 ptr, regB, val
+ strh \ptr, [\regB], \val
+ .endm
-.LSrcAligned:
- cmp count, #64
- b.ge .Lcpy_over64
- /*
- * Deal with small copies quickly by dropping straight into the
- * exit block.
- */
-.Ltail63:
- /*
- * Copy up to 48 bytes of data. At this point we only need the
- * bottom 6 bits of count to be accurate.
- */
- ands tmp1, count, #0x30
- b.eq .Ltiny15
- cmp tmp1w, #0x20
- b.eq 1f
- b.lt 2f
- ldp A_l, A_h, [src], #16
- stp A_l, A_h, [dst], #16
-1:
- ldp A_l, A_h, [src], #16
- stp A_l, A_h, [dst], #16
-2:
- ldp A_l, A_h, [src], #16
- stp A_l, A_h, [dst], #16
-.Ltiny15:
- /*
- * Prefer to break one ldp/stp into several load/store to access
- * memory in an increasing address order,rather than to load/store 16
- * bytes from (src-16) to (dst-16) and to backward the src to aligned
- * address,which way is used in original cortex memcpy. If keeping
- * the original memcpy process here, memmove need to satisfy the
- * precondition that src address is at least 16 bytes bigger than dst
- * address,otherwise some source data will be overwritten when memove
- * call memcpy directly. To make memmove simpler and decouple the
- * memcpy's dependency on memmove, withdrew the original process.
- */
- tbz count, #3, 1f
- ldr tmp1, [src], #8
- str tmp1, [dst], #8
-1:
- tbz count, #2, 2f
- ldr tmp1w, [src], #4
- str tmp1w, [dst], #4
-2:
- tbz count, #1, 3f
- ldrh tmp1w, [src], #2
- strh tmp1w, [dst], #2
-3:
- tbz count, #0, .Lexitfunc
- ldrb tmp1w, [src]
- strb tmp1w, [dst]
+ .macro ldr1 ptr, regB, val
+ ldr \ptr, [\regB], \val
+ .endm
-.Lexitfunc:
- ret
+ .macro str1 ptr, regB, val
+ str \ptr, [\regB], \val
+ .endm
-.Lcpy_over64:
- subs count, count, #128
- b.ge .Lcpy_body_large
- /*
- * Less than 128 bytes to copy, so handle 64 here and then jump
- * to the tail.
- */
- ldp A_l, A_h, [src],#16
- stp A_l, A_h, [dst],#16
- ldp B_l, B_h, [src],#16
- ldp C_l, C_h, [src],#16
- stp B_l, B_h, [dst],#16
- stp C_l, C_h, [dst],#16
- ldp D_l, D_h, [src],#16
- stp D_l, D_h, [dst],#16
+ .macro ldp1 ptr, regB, regC, val
+ ldp \ptr, \regB, [\regC], \val
+ .endm
- tst count, #0x3f
- b.ne .Ltail63
- ret
+ .macro stp1 ptr, regB, regC, val
+ stp \ptr, \regB, [\regC], \val
+ .endm
- /*
- * Critical loop. Start at a new cache line boundary. Assuming
- * 64 bytes per line this ensures the entire loop is in one line.
- */
- .p2align L1_CACHE_SHIFT
-.Lcpy_body_large:
- /* pre-get 64 bytes data. */
- ldp A_l, A_h, [src],#16
- ldp B_l, B_h, [src],#16
- ldp C_l, C_h, [src],#16
- ldp D_l, D_h, [src],#16
-1:
- /*
- * interlace the load of next 64 bytes data block with store of the last
- * loaded 64 bytes data.
- */
- stp A_l, A_h, [dst],#16
- ldp A_l, A_h, [src],#16
- stp B_l, B_h, [dst],#16
- ldp B_l, B_h, [src],#16
- stp C_l, C_h, [dst],#16
- ldp C_l, C_h, [src],#16
- stp D_l, D_h, [dst],#16
- ldp D_l, D_h, [src],#16
- subs count, count, #64
- b.ge 1b
- stp A_l, A_h, [dst],#16
- stp B_l, B_h, [dst],#16
- stp C_l, C_h, [dst],#16
- stp D_l, D_h, [dst],#16
-
- tst count, #0x3f
- b.ne .Ltail63
+ .weak memcpy
+ENTRY(__memcpy)
+ENTRY(memcpy)
+#include "copy_template.S"
ret
-ENDPROC(memcpy)
+ENDPIPROC(memcpy)
+ENDPROC(__memcpy)
D_l .req x13
D_h .req x14
+ .weak memmove
+ENTRY(__memmove)
ENTRY(memmove)
cmp dstin, src
- b.lo memcpy
+ b.lo __memcpy
add tmp1, src, count
cmp dstin, tmp1
- b.hs memcpy /* No overlap. */
+ b.hs __memcpy /* No overlap. */
add dst, dstin, count
add src, src, count
tst count, #0x3f
b.ne .Ltail63
ret
-ENDPROC(memmove)
+ENDPIPROC(memmove)
+ENDPROC(__memmove)
tmp3w .req w9
tmp3 .req x9
+ .weak memset
+ENTRY(__memset)
ENTRY(memset)
mov dst, dstin /* Preserve return value. */
and A_lw, val, #255
ands count, count, zva_bits_x
b.ne .Ltail_maybe_long
ret
-ENDPROC(memset)
+ENDPIPROC(memset)
+ENDPROC(__memset)
lsr data1, data1, #56
sub result, data1, data2, lsr #56
ret
-ENDPROC(strcmp)
+ENDPIPROC(strcmp)
csinv data1, data1, xzr, le
csel data2, data2, data2a, le
b .Lrealigned
-ENDPROC(strlen)
+ENDPIPROC(strlen)
.Lret0:
mov result, #0
ret
-ENDPROC(strncmp)
+ENDPIPROC(strncmp)
context.o proc.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_ARM64_PTDUMP) += dump.o
+
+obj-$(CONFIG_KASAN) += kasan_init.o
+KASAN_SANITIZE_kasan_init.o := n
b.lo 1b
dsb sy
ret
-ENDPROC(__flush_dcache_area)
+ENDPIPROC(__flush_dcache_area)
/*
* __inval_cache_range(start, end)
b.lo 2b
dsb sy
ret
-ENDPROC(__inval_cache_range)
+ENDPIPROC(__inval_cache_range)
ENDPROC(__dma_inv_range)
/*
b.lo 1b
dsb sy
ret
-ENDPROC(__dma_flush_range)
+ENDPIPROC(__dma_flush_range)
/*
* __dma_map_area(start, size, dir)
cmp w2, #DMA_FROM_DEVICE
b.eq __dma_inv_range
b __dma_clean_range
-ENDPROC(__dma_map_area)
+ENDPIPROC(__dma_map_area)
/*
* __dma_unmap_area(start, size, dir)
cmp w2, #DMA_TO_DEVICE
b.ne __dma_inv_range
ret
-ENDPROC(__dma_unmap_area)
+ENDPIPROC(__dma_unmap_area)
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/init.h>
+#include <linux/bitops.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
+#include <asm/cpufeature.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
-#include <asm/cachetype.h>
-#define asid_bits(reg) \
- (((read_cpuid(ID_AA64MMFR0_EL1) & 0xf0) >> 2) + 8)
+static u32 asid_bits;
+static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
-#define ASID_FIRST_VERSION (1 << MAX_ASID_BITS)
+static atomic64_t asid_generation;
+static unsigned long *asid_map;
-static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
-unsigned int cpu_last_asid = ASID_FIRST_VERSION;
+static DEFINE_PER_CPU(atomic64_t, active_asids);
+static DEFINE_PER_CPU(u64, reserved_asids);
+static cpumask_t tlb_flush_pending;
-/*
- * We fork()ed a process, and we need a new context for the child to run in.
- */
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- mm->context.id = 0;
- raw_spin_lock_init(&mm->context.id_lock);
-}
+#define ASID_MASK (~GENMASK(asid_bits - 1, 0))
+#define ASID_FIRST_VERSION (1UL << asid_bits)
+#define NUM_USER_ASIDS ASID_FIRST_VERSION
-static void flush_context(void)
+static void flush_context(unsigned int cpu)
{
- /* set the reserved TTBR0 before flushing the TLB */
- cpu_set_reserved_ttbr0();
- flush_tlb_all();
- if (icache_is_aivivt())
- __flush_icache_all();
-}
+ int i;
+ u64 asid;
-static void set_mm_context(struct mm_struct *mm, unsigned int asid)
-{
- unsigned long flags;
+ /* Update the list of reserved ASIDs and the ASID bitmap. */
+ bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
/*
- * Locking needed for multi-threaded applications where the same
- * mm->context.id could be set from different CPUs during the
- * broadcast. This function is also called via IPI so the
- * mm->context.id_lock has to be IRQ-safe.
+ * Ensure the generation bump is observed before we xchg the
+ * active_asids.
*/
- raw_spin_lock_irqsave(&mm->context.id_lock, flags);
- if (likely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
+ smp_wmb();
+
+ for_each_possible_cpu(i) {
+ asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0);
/*
- * Old version of ASID found. Set the new one and reset
- * mm_cpumask(mm).
+ * If this CPU has already been through a
+ * rollover, but hasn't run another task in
+ * the meantime, we must preserve its reserved
+ * ASID, as this is the only trace we have of
+ * the process it is still running.
*/
- mm->context.id = asid;
- cpumask_clear(mm_cpumask(mm));
+ if (asid == 0)
+ asid = per_cpu(reserved_asids, i);
+ __set_bit(asid & ~ASID_MASK, asid_map);
+ per_cpu(reserved_asids, i) = asid;
}
- raw_spin_unlock_irqrestore(&mm->context.id_lock, flags);
- /*
- * Set the mm_cpumask(mm) bit for the current CPU.
- */
- cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+ /* Queue a TLB invalidate and flush the I-cache if necessary. */
+ cpumask_setall(&tlb_flush_pending);
+
+ if (icache_is_aivivt())
+ __flush_icache_all();
}
-/*
- * Reset the ASID on the current CPU. This function call is broadcast from the
- * CPU handling the ASID rollover and holding cpu_asid_lock.
- */
-static void reset_context(void *info)
+static int is_reserved_asid(u64 asid)
+{
+ int cpu;
+ for_each_possible_cpu(cpu)
+ if (per_cpu(reserved_asids, cpu) == asid)
+ return 1;
+ return 0;
+}
+
+static u64 new_context(struct mm_struct *mm, unsigned int cpu)
{
- unsigned int asid;
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm = current->active_mm;
+ static u32 cur_idx = 1;
+ u64 asid = atomic64_read(&mm->context.id);
+ u64 generation = atomic64_read(&asid_generation);
+
+ if (asid != 0) {
+ /*
+ * If our current ASID was active during a rollover, we
+ * can continue to use it and this was just a false alarm.
+ */
+ if (is_reserved_asid(asid))
+ return generation | (asid & ~ASID_MASK);
+
+ /*
+ * We had a valid ASID in a previous life, so try to re-use
+ * it if possible.
+ */
+ asid &= ~ASID_MASK;
+ if (!__test_and_set_bit(asid, asid_map))
+ goto bump_gen;
+ }
/*
- * current->active_mm could be init_mm for the idle thread immediately
- * after secondary CPU boot or hotplug. TTBR0_EL1 is already set to
- * the reserved value, so no need to reset any context.
+ * Allocate a free ASID. If we can't find one, take a note of the
+ * currently active ASIDs and mark the TLBs as requiring flushes.
+ * We always count from ASID #1, as we use ASID #0 when setting a
+ * reserved TTBR0 for the init_mm.
*/
- if (mm == &init_mm)
- return;
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx);
+ if (asid != NUM_USER_ASIDS)
+ goto set_asid;
- smp_rmb();
- asid = cpu_last_asid + cpu;
+ /* We're out of ASIDs, so increment the global generation count */
+ generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION,
+ &asid_generation);
+ flush_context(cpu);
- flush_context();
- set_mm_context(mm, asid);
+ /* We have at least 1 ASID per CPU, so this will always succeed */
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
- /* set the new ASID */
- cpu_switch_mm(mm->pgd, mm);
+set_asid:
+ __set_bit(asid, asid_map);
+ cur_idx = asid;
+
+bump_gen:
+ asid |= generation;
+ return asid;
}
-void __new_context(struct mm_struct *mm)
+void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
{
- unsigned int asid;
- unsigned int bits = asid_bits();
+ unsigned long flags;
+ u64 asid;
+
+ asid = atomic64_read(&mm->context.id);
- raw_spin_lock(&cpu_asid_lock);
/*
- * Check the ASID again, in case the change was broadcast from another
- * CPU before we acquired the lock.
+ * The memory ordering here is subtle. We rely on the control
+ * dependency between the generation read and the update of
+ * active_asids to ensure that we are synchronised with a
+ * parallel rollover (i.e. this pairs with the smp_wmb() in
+ * flush_context).
*/
- if (!unlikely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
- cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
- raw_spin_unlock(&cpu_asid_lock);
- return;
+ if (!((asid ^ atomic64_read(&asid_generation)) >> asid_bits)
+ && atomic64_xchg_relaxed(&per_cpu(active_asids, cpu), asid))
+ goto switch_mm_fastpath;
+
+ raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+ /* Check that our ASID belongs to the current generation. */
+ asid = atomic64_read(&mm->context.id);
+ if ((asid ^ atomic64_read(&asid_generation)) >> asid_bits) {
+ asid = new_context(mm, cpu);
+ atomic64_set(&mm->context.id, asid);
}
- /*
- * At this point, it is guaranteed that the current mm (with an old
- * ASID) isn't active on any other CPU since the ASIDs are changed
- * simultaneously via IPI.
- */
- asid = ++cpu_last_asid;
- /*
- * If we've used up all our ASIDs, we need to start a new version and
- * flush the TLB.
- */
- if (unlikely((asid & ((1 << bits) - 1)) == 0)) {
- /* increment the ASID version */
- cpu_last_asid += (1 << MAX_ASID_BITS) - (1 << bits);
- if (cpu_last_asid == 0)
- cpu_last_asid = ASID_FIRST_VERSION;
- asid = cpu_last_asid + smp_processor_id();
- flush_context();
- smp_wmb();
- smp_call_function(reset_context, NULL, 1);
- cpu_last_asid += NR_CPUS - 1;
+ if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
+ local_flush_tlb_all();
+
+ atomic64_set(&per_cpu(active_asids, cpu), asid);
+ raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+
+switch_mm_fastpath:
+ cpu_switch_mm(mm->pgd, mm);
+}
+
+static int asids_init(void)
+{
+ int fld = cpuid_feature_extract_field(read_cpuid(ID_AA64MMFR0_EL1), 4);
+
+ switch (fld) {
+ default:
+ pr_warn("Unknown ASID size (%d); assuming 8-bit\n", fld);
+ /* Fallthrough */
+ case 0:
+ asid_bits = 8;
+ break;
+ case 2:
+ asid_bits = 16;
}
- set_mm_context(mm, asid);
- raw_spin_unlock(&cpu_asid_lock);
+ /* If we end up with more CPUs than ASIDs, expect things to crash */
+ WARN_ON(NUM_USER_ASIDS < num_possible_cpus());
+ atomic64_set(&asid_generation, ASID_FIRST_VERSION);
+ asid_map = kzalloc(BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(*asid_map),
+ GFP_KERNEL);
+ if (!asid_map)
+ panic("Failed to allocate bitmap for %lu ASIDs\n",
+ NUM_USER_ASIDS);
+
+ pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS);
+ return 0;
}
+early_initcall(asids_init);
{ -1, NULL },
};
+/*
+ * The page dumper groups page table entries of the same type into a single
+ * description. It uses pg_state to track the range information while
+ * iterating over the pte entries. When the continuity is broken it then
+ * dumps out a description of the range.
+ */
struct pg_state {
struct seq_file *seq;
const struct addr_marker *marker;
.val = PTE_NG,
.set = "NG",
.clear = " ",
+ }, {
+ .mask = PTE_CONT,
+ .val = PTE_CONT,
+ .set = "CON",
+ .clear = " ",
+ }, {
+ .mask = PTE_TABLE_BIT,
+ .val = PTE_TABLE_BIT,
+ .set = " ",
+ .clear = "BLK",
}, {
.mask = PTE_UXN,
.val = PTE_UXN,
unsigned long delta;
if (st->current_prot) {
- seq_printf(st->seq, "0x%16lx-0x%16lx ",
+ seq_printf(st->seq, "0x%016lx-0x%016lx ",
st->start_address, addr);
delta = (addr - st->start_address) >> 10;
}
#ifdef CONFIG_ARM64_PAN
-void cpu_enable_pan(void)
+void cpu_enable_pan(void *__unused)
{
config_sctlr_el1(SCTLR_EL1_SPAN, 0);
}
memset(zone_size, 0, sizeof(zone_size));
/* 4GB maximum for 32-bit only capable devices */
- if (IS_ENABLED(CONFIG_ZONE_DMA)) {
- max_dma = PFN_DOWN(arm64_dma_phys_limit);
- zone_size[ZONE_DMA] = max_dma - min;
- }
+#ifdef CONFIG_ZONE_DMA
+ max_dma = PFN_DOWN(arm64_dma_phys_limit);
+ zone_size[ZONE_DMA] = max_dma - min;
+#endif
zone_size[ZONE_NORMAL] = max - max_dma;
memcpy(zhole_size, zone_size, sizeof(zhole_size));
if (start >= max)
continue;
- if (IS_ENABLED(CONFIG_ZONE_DMA) && start < max_dma) {
+#ifdef CONFIG_ZONE_DMA
+ if (start < max_dma) {
unsigned long dma_end = min(end, max_dma);
zhole_size[ZONE_DMA] -= dma_end - start;
}
-
+#endif
if (end > max_dma) {
unsigned long normal_end = min(end, max);
unsigned long normal_start = max(start, max_dma);
#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
pr_notice("Virtual kernel memory layout:\n"
+#ifdef CONFIG_KASAN
+ " kasan : 0x%16lx - 0x%16lx (%6ld GB)\n"
+#endif
" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n"
#ifdef CONFIG_SPARSEMEM_VMEMMAP
" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n"
" .init : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .text : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .data : 0x%p" " - 0x%p" " (%6ld KB)\n",
+#ifdef CONFIG_KASAN
+ MLG(KASAN_SHADOW_START, KASAN_SHADOW_END),
+#endif
MLG(VMALLOC_START, VMALLOC_END),
#ifdef CONFIG_SPARSEMEM_VMEMMAP
MLG((unsigned long)vmemmap,
--- /dev/null
+/*
+ * This file contains kasan initialization code for ARM64.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "kasan: " fmt
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/start_kernel.h>
+
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
+
+static void __init kasan_early_pte_populate(pmd_t *pmd, unsigned long addr,
+ unsigned long end)
+{
+ pte_t *pte;
+ unsigned long next;
+
+ if (pmd_none(*pmd))
+ pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+
+ pte = pte_offset_kernel(pmd, addr);
+ do {
+ next = addr + PAGE_SIZE;
+ set_pte(pte, pfn_pte(virt_to_pfn(kasan_zero_page),
+ PAGE_KERNEL));
+ } while (pte++, addr = next, addr != end && pte_none(*pte));
+}
+
+static void __init kasan_early_pmd_populate(pud_t *pud,
+ unsigned long addr,
+ unsigned long end)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ if (pud_none(*pud))
+ pud_populate(&init_mm, pud, kasan_zero_pmd);
+
+ pmd = pmd_offset(pud, addr);
+ do {
+ next = pmd_addr_end(addr, end);
+ kasan_early_pte_populate(pmd, addr, next);
+ } while (pmd++, addr = next, addr != end && pmd_none(*pmd));
+}
+
+static void __init kasan_early_pud_populate(pgd_t *pgd,
+ unsigned long addr,
+ unsigned long end)
+{
+ pud_t *pud;
+ unsigned long next;
+
+ if (pgd_none(*pgd))
+ pgd_populate(&init_mm, pgd, kasan_zero_pud);
+
+ pud = pud_offset(pgd, addr);
+ do {
+ next = pud_addr_end(addr, end);
+ kasan_early_pmd_populate(pud, addr, next);
+ } while (pud++, addr = next, addr != end && pud_none(*pud));
+}
+
+static void __init kasan_map_early_shadow(void)
+{
+ unsigned long addr = KASAN_SHADOW_START;
+ unsigned long end = KASAN_SHADOW_END;
+ unsigned long next;
+ pgd_t *pgd;
+
+ pgd = pgd_offset_k(addr);
+ do {
+ next = pgd_addr_end(addr, end);
+ kasan_early_pud_populate(pgd, addr, next);
+ } while (pgd++, addr = next, addr != end);
+}
+
+asmlinkage void __init kasan_early_init(void)
+{
+ BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << 61));
+ BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE));
+ BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
+ kasan_map_early_shadow();
+}
+
+static void __init clear_pgds(unsigned long start,
+ unsigned long end)
+{
+ /*
+ * Remove references to kasan page tables from
+ * swapper_pg_dir. pgd_clear() can't be used
+ * here because it's nop on 2,3-level pagetable setups
+ */
+ for (; start < end; start += PGDIR_SIZE)
+ set_pgd(pgd_offset_k(start), __pgd(0));
+}
+
+static void __init cpu_set_ttbr1(unsigned long ttbr1)
+{
+ asm(
+ " msr ttbr1_el1, %0\n"
+ " isb"
+ :
+ : "r" (ttbr1));
+}
+
+void __init kasan_init(void)
+{
+ struct memblock_region *reg;
+
+ /*
+ * We are going to perform proper setup of shadow memory.
+ * At first we should unmap early shadow (clear_pgds() call bellow).
+ * However, instrumented code couldn't execute without shadow memory.
+ * tmp_pg_dir used to keep early shadow mapped until full shadow
+ * setup will be finished.
+ */
+ memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
+ cpu_set_ttbr1(__pa(tmp_pg_dir));
+ flush_tlb_all();
+
+ clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+ kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
+ kasan_mem_to_shadow((void *)MODULES_VADDR));
+
+ for_each_memblock(memory, reg) {
+ void *start = (void *)__phys_to_virt(reg->base);
+ void *end = (void *)__phys_to_virt(reg->base + reg->size);
+
+ if (start >= end)
+ break;
+
+ /*
+ * end + 1 here is intentional. We check several shadow bytes in
+ * advance to slightly speed up fastpath. In some rare cases
+ * we could cross boundary of mapped shadow, so we just map
+ * some more here.
+ */
+ vmemmap_populate((unsigned long)kasan_mem_to_shadow(start),
+ (unsigned long)kasan_mem_to_shadow(end) + 1,
+ pfn_to_nid(virt_to_pfn(start)));
+ }
+
+ memset(kasan_zero_page, 0, PAGE_SIZE);
+ cpu_set_ttbr1(__pa(swapper_pg_dir));
+ flush_tlb_all();
+
+ /* At this point kasan is fully initialized. Enable error messages */
+ init_task.kasan_depth = 0;
+ pr_info("KernelAddressSanitizer initialized\n");
+}
#include <asm/cputype.h>
#include <asm/fixmap.h>
+#include <asm/kernel-pgtable.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
do {
/*
* Need to have the least restrictive permissions available
- * permissions will be fixed up later
+ * permissions will be fixed up later. Default the new page
+ * range as contiguous ptes.
*/
- set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC_CONT));
pfn++;
} while (pte++, i++, i < PTRS_PER_PTE);
}
+/*
+ * Given a PTE with the CONT bit set, determine where the CONT range
+ * starts, and clear the entire range of PTE CONT bits.
+ */
+static void clear_cont_pte_range(pte_t *pte, unsigned long addr)
+{
+ int i;
+
+ pte -= CONT_RANGE_OFFSET(addr);
+ for (i = 0; i < CONT_PTES; i++) {
+ set_pte(pte, pte_mknoncont(*pte));
+ pte++;
+ }
+ flush_tlb_all();
+}
+
+/*
+ * Given a range of PTEs set the pfn and provided page protection flags
+ */
+static void __populate_init_pte(pte_t *pte, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ pgprot_t prot)
+{
+ unsigned long pfn = __phys_to_pfn(phys);
+
+ do {
+ /* clear all the bits except the pfn, then apply the prot */
+ set_pte(pte, pfn_pte(pfn, prot));
+ pte++;
+ pfn++;
+ addr += PAGE_SIZE;
+ } while (addr != end);
+}
+
static void alloc_init_pte(pmd_t *pmd, unsigned long addr,
- unsigned long end, unsigned long pfn,
+ unsigned long end, phys_addr_t phys,
pgprot_t prot,
void *(*alloc)(unsigned long size))
{
pte_t *pte;
+ unsigned long next;
if (pmd_none(*pmd) || pmd_sect(*pmd)) {
pte = alloc(PTRS_PER_PTE * sizeof(pte_t));
pte = pte_offset_kernel(pmd, addr);
do {
- set_pte(pte, pfn_pte(pfn, prot));
- pfn++;
- } while (pte++, addr += PAGE_SIZE, addr != end);
+ next = min(end, (addr + CONT_SIZE) & CONT_MASK);
+ if (((addr | next | phys) & ~CONT_MASK) == 0) {
+ /* a block of CONT_PTES */
+ __populate_init_pte(pte, addr, next, phys,
+ prot | __pgprot(PTE_CONT));
+ } else {
+ /*
+ * If the range being split is already inside of a
+ * contiguous range but this PTE isn't going to be
+ * contiguous, then we want to unmark the adjacent
+ * ranges, then update the portion of the range we
+ * are interrested in.
+ */
+ clear_cont_pte_range(pte, addr);
+ __populate_init_pte(pte, addr, next, phys, prot);
+ }
+
+ pte += (next - addr) >> PAGE_SHIFT;
+ phys += next - addr;
+ addr = next;
+ } while (addr != end);
}
void split_pud(pud_t *old_pud, pmd_t *pmd)
}
}
} else {
- alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys),
- prot, alloc);
+ alloc_init_pte(pmd, addr, next, phys, prot, alloc);
}
phys += next - addr;
} while (pmd++, addr = next, addr != end);
* memory addressable from the initial direct kernel mapping.
*
* The initial direct kernel mapping, located at swapper_pg_dir, gives
- * us PUD_SIZE (4K pages) or PMD_SIZE (64K pages) memory starting from
- * PHYS_OFFSET (which must be aligned to 2MB as per
- * Documentation/arm64/booting.txt).
+ * us PUD_SIZE (with SECTION maps) or PMD_SIZE (without SECTION maps,
+ * memory starting from PHYS_OFFSET (which must be aligned to 2MB as
+ * per Documentation/arm64/booting.txt).
*/
- if (IS_ENABLED(CONFIG_ARM64_64K_PAGES))
- limit = PHYS_OFFSET + PMD_SIZE;
- else
- limit = PHYS_OFFSET + PUD_SIZE;
+ limit = PHYS_OFFSET + SWAPPER_INIT_MAP_SIZE;
memblock_set_current_limit(limit);
/* map all the memory banks */
if (start >= end)
break;
-#ifndef CONFIG_ARM64_64K_PAGES
- /*
- * For the first memory bank align the start address and
- * current memblock limit to prevent create_mapping() from
- * allocating pte page tables from unmapped memory.
- * When 64K pages are enabled, the pte page table for the
- * first PGDIR_SIZE is already present in swapper_pg_dir.
- */
- if (start < limit)
- start = ALIGN(start, PMD_SIZE);
- if (end < limit) {
- limit = end & PMD_MASK;
- memblock_set_current_limit(limit);
+ if (ARM64_SWAPPER_USES_SECTION_MAPS) {
+ /*
+ * For the first memory bank align the start address and
+ * current memblock limit to prevent create_mapping() from
+ * allocating pte page tables from unmapped memory. With
+ * the section maps, if the first block doesn't end on section
+ * size boundary, create_mapping() will try to allocate a pte
+ * page, which may be returned from an unmapped area.
+ * When section maps are not used, the pte page table for the
+ * current limit is already present in swapper_pg_dir.
+ */
+ if (start < limit)
+ start = ALIGN(start, SECTION_SIZE);
+ if (end < limit) {
+ limit = end & SECTION_MASK;
+ memblock_set_current_limit(limit);
+ }
}
-#endif
__map_memblock(start, end);
}
* point to zero page to avoid speculatively fetching new entries.
*/
cpu_set_reserved_ttbr0();
- flush_tlb_all();
+ local_flush_tlb_all();
cpu_set_default_tcr_t0sz();
}
return pfn_valid(pte_pfn(*pte));
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
-#ifdef CONFIG_ARM64_64K_PAGES
+#if !ARM64_SWAPPER_USES_SECTION_MAPS
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
{
return vmemmap_populate_basepages(start, end, node);
}
-#else /* !CONFIG_ARM64_64K_PAGES */
+#else /* !ARM64_SWAPPER_USES_SECTION_MAPS */
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
{
unsigned long addr = start;
{
const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
pgprot_t prot = PAGE_KERNEL | PTE_RDONLY;
- int granularity, size, offset;
+ int size, offset;
void *dt_virt;
/*
*/
BUILD_BUG_ON(dt_virt_base % SZ_2M);
- if (IS_ENABLED(CONFIG_ARM64_64K_PAGES)) {
- BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> PMD_SHIFT !=
- __fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT);
-
- granularity = PAGE_SIZE;
- } else {
- BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> PUD_SHIFT !=
- __fix_to_virt(FIX_BTMAP_BEGIN) >> PUD_SHIFT);
-
- granularity = PMD_SIZE;
- }
+ BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT !=
+ __fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT);
- offset = dt_phys % granularity;
+ offset = dt_phys % SWAPPER_BLOCK_SIZE;
dt_virt = (void *)dt_virt_base + offset;
/* map the first chunk so we can read the size from the header */
- create_mapping(round_down(dt_phys, granularity), dt_virt_base,
- granularity, prot);
+ create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
+ SWAPPER_BLOCK_SIZE, prot);
if (fdt_check_header(dt_virt) != 0)
return NULL;
if (size > MAX_FDT_SIZE)
return NULL;
- if (offset + size > granularity)
- create_mapping(round_down(dt_phys, granularity), dt_virt_base,
- round_up(offset + size, granularity), prot);
+ if (offset + size > SWAPPER_BLOCK_SIZE)
+ create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
+ round_up(offset + size, SWAPPER_BLOCK_SIZE), prot);
memblock_reserve(dt_phys, size);
int ret;
struct page_change_data data;
- if (!IS_ALIGNED(addr, PAGE_SIZE)) {
+ if (!PAGE_ALIGNED(addr)) {
start &= PAGE_MASK;
end = start + size;
WARN_ON_ONCE(1);
#include "mm.h"
-#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
-
static struct kmem_cache *pgd_cache;
pgd_t *pgd_alloc(struct mm_struct *mm)
#ifdef CONFIG_ARM64_64K_PAGES
#define TCR_TG_FLAGS TCR_TG0_64K | TCR_TG1_64K
-#else
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define TCR_TG_FLAGS TCR_TG0_16K | TCR_TG1_16K
+#else /* CONFIG_ARM64_4K_PAGES */
#define TCR_TG_FLAGS TCR_TG0_4K | TCR_TG1_4K
#endif
* - pgd_phys - physical address of new TTB
*/
ENTRY(cpu_do_switch_mm)
- mmid w1, x1 // get mm->context.id
+ mmid x1, x1 // get mm->context.id
bfi x0, x1, #48, #16 // set the ASID
msr ttbr0_el1, x0 // set TTBR0
isb
* value of the SCTLR_EL1 register.
*/
ENTRY(__cpu_setup)
- tlbi vmalle1is // invalidate I + D TLBs
- dsb ish
+ tlbi vmalle1 // Invalidate local TLB
+ dsb nsh
mov x0, #3 << 20
msr cpacr_el1, x0 // Enable FP/ASIMD
generic-y += barrier.h
generic-y += bitsperlong.h
generic-y += bugs.h
+generic-y += clkdev.h
generic-y += cputime.h
generic-y += current.h
generic-y += device.h
+++ /dev/null
-#ifndef _ASM_CLKDEV_H
-#define _ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-struct clk;
-
-static inline int __clk_get(struct clk *clk)
-{
- return 1;
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-}
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
- return kzalloc(size, GFP_KERNEL);
-}
-
-#endif /* _ASM_CLKDEV_H */
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
- select GENERIC_CMOS_UPDATE
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS2
select OLD_SIGSUSPEND
blo 1b
nop
-#ifdef CONFIG_BLK_DEV_ETRAXIDE
- ;; disable ATA before enabling it in genconfig below
- moveq 0,$r0
- move.d $r0,[R_ATA_CTRL_DATA]
- move.d $r0,[R_ATA_TRANSFER_CNT]
- move.d $r0,[R_ATA_CONFIG]
-#if 0
- move.d R_PORT_G_DATA, $r1
- move.d $r0, [$r1]; assert ATA bus-reset
- nop
- nop
- nop
- nop
- nop
- nop
- move.d 0x08000000,$r0
- move.d $r0,[$r1]
-#endif
-#endif
-
-#ifdef CONFIG_JULIETTE
- ;; configure external DMA channel 0 before enabling it in genconfig
-
- moveq 0,$r0
- move.d $r0,[R_EXT_DMA_0_ADDR]
- ; cnt enable, word size, output, stop, size 0
- move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \
- | IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \
- | IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \
- | IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \
- | IO_STATE (R_EXT_DMA_0_CMD, wid, word) \
- | IO_STATE (R_EXT_DMA_0_CMD, dir, output) \
- | IO_STATE (R_EXT_DMA_0_CMD, run, stop) \
- | IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0
- move.d $r0,[R_EXT_DMA_0_CMD]
-
- ;; reset dma4 and wait for completion
-
- moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
- move.b $r0,[R_DMA_CH4_CMD]
-1: move.b [R_DMA_CH4_CMD],$r0
- and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0
- cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
- beq 1b
- nop
-
- ;; reset dma5 and wait for completion
-
- moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
- move.b $r0,[R_DMA_CH5_CMD]
-1: move.b [R_DMA_CH5_CMD],$r0
- and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0
- cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
- beq 1b
- nop
-#endif
-
;; Etrax product HW genconfig setup
moveq 0,$r0
| IO_STATE (R_GEN_CONFIG, dma9, usb),$r0
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT)
- or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0
-#endif
-
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT)
- or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0
-#endif
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT)
- or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0
-#endif
-
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT)
- or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0
-#endif
-
move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
move.d $r0,[R_GEN_CONFIG]
;; including their shadow registers
move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
- or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0
-#endif
move.b $r0,[port_pa_dir_shadow]
move.b $r0,[R_PORT_PA_DIR]
move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
- and.b ~(1 << 7),$r0
-#else
- or.b (1 << 7),$r0
-#endif
-#endif
move.b $r0,[port_pa_data_shadow]
move.b $r0,[R_PORT_PA_DATA]
move.b $r0,[port_pb_config_shadow]
move.b $r0,[R_PORT_PB_CONFIG]
move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
- or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0
-#endif
move.b $r0,[port_pb_dir_shadow]
move.b $r0,[R_PORT_PB_DIR]
move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
- and.b ~(1 << 5),$r0
-#else
- or.b (1 << 5),$r0
-#endif
-#endif
move.b $r0,[port_pb_data_shadow]
move.b $r0,[R_PORT_PB_DATA]
move.d $r0, [R_PORT_PB_I2C]
moveq 0,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
- and.d ~(1 << 10),$r0
-#else
- or.d (1 << 10),$r0
-#endif
-#endif
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
- and.d ~(1 << 11),$r0
-#else
- or.d (1 << 11),$r0
-#endif
-#endif
move.d $r0,[port_g_data_shadow]
move.d $r0,[R_PORT_G_DATA]
/* Error and warning messages. */
enum error_type
{
- SUCCESS, E01, E02, E03, E04, E05, E06, E07
+ SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
};
static char *error_message[] =
{
"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
"E05 Change register content - P - the register is not implemented..",
"E06 Change memory content - M - internal error.",
- "E07 Change register content - P - the register is not stored on the stack"
+ "E07 Change register content - P - the register is not stored on the stack",
+ "E08 Invalid parameter"
};
/********************************* Register image ****************************/
/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
breakpoint to be handled. A static breakpoint uses the content of register
BRP as it is whereas a dynamic breakpoint requires subtraction with 2
in order to execute the instruction. The first breakpoint is static. */
-static unsigned char is_dyn_brkp = 0;
+static unsigned char __used is_dyn_brkp;
/********************************* String library ****************************/
/* Single-step over library functions creates trap loops. */
}
/********************************** Packet I/O ******************************/
-/* Returns the integer equivalent of a hexadecimal character. */
-static int
-hex (char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return (ch - 'a' + 10);
- if ((ch >= '0') && (ch <= '9'))
- return (ch - '0');
- if ((ch >= 'A') && (ch <= 'F'))
- return (ch - 'A' + 10);
- return (-1);
-}
/* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character
return (buf);
}
-/* Convert the array, in hexadecimal representation, pointed to by buf into
- binary representation. Put the result in mem, and return a pointer to
- the character after the last byte written. */
-static unsigned char*
-hex2mem (unsigned char *mem, char *buf, int count)
-{
- int i;
- unsigned char ch;
- for (i = 0; i < count; i++) {
- ch = hex (*buf++) << 4;
- ch = ch + hex (*buf++);
- *mem++ = ch;
- }
- return (mem);
-}
-
/* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to the character after
the last byte written.
buffer[count] = '\0';
if (ch == '#') {
- xmitcsum = hex (getDebugChar ()) << 4;
- xmitcsum += hex (getDebugChar ());
+ xmitcsum = hex_to_bin(getDebugChar()) << 4;
+ xmitcsum += hex_to_bin(getDebugChar());
if (checksum != xmitcsum) {
/* Wrong checksum */
putDebugChar ('-');
/********************************* Register image ****************************/
/* Write a value to a specified register in the register image of the current
- thread. Returns status code SUCCESS, E02 or E05. */
+ thread. Returns status code SUCCESS, E02, E05 or E08. */
static int
write_register (int regno, char *val)
{
if (regno >= R0 && regno <= PC) {
/* 32-bit register with simple offset. */
- hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)current_reg + regno * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
}
else if (regno == P0 || regno == VR || regno == P4 || regno == P8) {
/* Do not support read-only registers. */
else if (regno == CCR) {
/* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented,
and P7 (MOF) is 32 bits in ETRAX 100LX. */
- hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
- val, sizeof(unsigned short));
+ if (hex2bin((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
+ val, sizeof(unsigned short)))
+ status = E08;
}
else if (regno >= MOF && regno <= USP) {
/* 32 bit register with complex offset. (P8 has been taken care of.) */
- hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
}
else {
/* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
/* Write registers. GXX..XX
Each byte of register data is described by two hex digits.
Success: OK
- Failure: void. */
- hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers));
- gdb_cris_strcpy (remcomOutBuffer, "OK");
+ Failure: E08. */
+ if (hex2bin((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)))
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ else
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
break;
case 'P':
for each byte in the register (target byte order). P1f=11223344 means
set register 31 to 44332211.
Success: OK
- Failure: E02, E05 */
+ Failure: E02, E05, E08 */
{
char *suffix;
int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16);
/* Do not support non-existing registers on the stack. */
gdb_cris_strcpy (remcomOutBuffer, error_message[E07]);
break;
+ case E08:
+ /* Invalid parameter. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ break;
default:
/* Valid register number. */
gdb_cris_strcpy (remcomOutBuffer, "OK");
AA..AA is the start address, LLLL is the number of bytes, and
XX..XX is the hexadecimal data.
Success: OK
- Failure: void. */
+ Failure: E08. */
{
char *lenptr;
char *dataptr;
int length = gdb_cris_strtol(lenptr+1, &dataptr, 16);
if (*lenptr == ',' && *dataptr == ':') {
if (remcomInBuffer[0] == 'M') {
- hex2mem(addr, dataptr + 1, length);
- }
- else /* X */ {
+ if (hex2bin(addr, dataptr + 1, length))
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ else
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ } else /* X */ {
bin2mem(addr, dataptr + 1, length);
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
}
- gdb_cris_strcpy (remcomOutBuffer, "OK");
- }
- else {
+ } else {
gdb_cris_strcpy (remcomOutBuffer, error_message[E06]);
}
}
" move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n"
-" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+" move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n"
" move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n"
-" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+" move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n"
*R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* bootrom */
IO_STATE(R_MMU_KSEG, seg_e, page ) |
- IO_STATE(R_MMU_KSEG, seg_d, page ) |
- IO_STATE(R_MMU_KSEG, seg_c, page ) |
+ IO_STATE(R_MMU_KSEG, seg_d, page ) |
+ IO_STATE(R_MMU_KSEG, seg_c, page ) |
IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */
-#ifdef CONFIG_JULIETTE
- IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */
-#else
IO_STATE(R_MMU_KSEG, seg_a, page ) |
-#endif
IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */
IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */
IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */
IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) |
IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
-#ifdef CONFIG_JULIETTE
- IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) |
-#else
IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) |
-#endif
IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) |
IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) );
-
+
*R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) |
IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |
depends on ETRAX_ARCH_V32
default "c0000000"
-choice
- prompt "Nbr of Ethernet LED groups"
- depends on ETRAX_ARCH_V32
- default ETRAX_NBR_LED_GRP_ONE
- help
- Select how many Ethernet LED groups that can be used. Usually one per Ethernet
- interface is a good choice.
-
-config ETRAX_NBR_LED_GRP_ZERO
- bool "Use zero LED groups"
- help
- Select this if you do not want any Ethernet LEDs.
-
-config ETRAX_NBR_LED_GRP_ONE
- bool "Use one LED group"
- help
- Select this if you want one Ethernet LED group. This LED group
- can be used for one or more Ethernet interfaces. However, it is
- recommended that each Ethernet interface use a dedicated LED group.
-
-config ETRAX_NBR_LED_GRP_TWO
- bool "Use two LED groups"
- help
- Select this if you want two Ethernet LED groups. This is the
- best choice if you have more than one Ethernet interface and
- would like to have separate LEDs for the interfaces.
-
-endchoice
-
-config ETRAX_LED_G_NET0
- string "Ethernet LED group 0 green LED bit"
- depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA3"
- help
- Bit to use for the green LED in Ethernet LED group 0.
-
-config ETRAX_LED_R_NET0
- string "Ethernet LED group 0 red LED bit"
- depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA4"
- help
- Bit to use for the red LED in Ethernet LED group 0.
-
-config ETRAX_LED_G_NET1
- string "Ethernet group 1 green LED bit"
- depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
- default ""
- help
- Bit to use for the green LED in Ethernet LED group 1.
-
-config ETRAX_LED_R_NET1
- string "Ethernet group 1 red LED bit"
- depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
- default ""
- help
- Bit to use for the red LED in Ethernet LED group 1.
-
-config ETRAX_V32_LED2G
- string "Second green LED bit"
- depends on ETRAX_ARCH_V32
- default "PA5"
- help
- Bit to use for the first green LED (status LED).
- Most Axis products use bit A5 here.
-
-config ETRAX_V32_LED2R
- string "Second red LED bit"
- depends on ETRAX_ARCH_V32
- default "PA6"
- help
- Bit to use for the first red LED (network LED).
- Most Axis products use bit A6 here.
-
-config ETRAX_V32_LED3G
- string "Third green LED bit"
- depends on ETRAX_ARCH_V32
- default "PA7"
- help
- Bit to use for the first green LED (drive/power LED).
- Most Axis products use bit A7 here.
-
-config ETRAX_V32_LED3R
- string "Third red LED bit"
- depends on ETRAX_ARCH_V32
- default "PA7"
- help
- Bit to use for the first red LED (drive/power LED).
- Most Axis products use bit A7 here.
-
choice
prompt "Kernel GDB port"
depends on ETRAX_KGDB
Say Y if your boot code, kernel and root file system is in
NAND flash. Say N if they are in NOR flash.
-config ETRAX_I2C
- bool "I2C driver"
- depends on ETRAX_ARCH_V32
- help
- This option enables the I2C driver used by e.g. the RTC driver.
-
-config ETRAX_V32_I2C_DATA_PORT
- string "I2C data pin"
- depends on ETRAX_I2C
- help
- The pin to use for I2C data.
-
-config ETRAX_V32_I2C_CLK_PORT
- string "I2C clock pin"
- depends on ETRAX_I2C
- help
- The pin to use for I2C clock.
-
-config ETRAX_GPIO
- bool "GPIO support"
- depends on ETRAX_ARCH_V32
- ---help---
- Enables the ETRAX general port device (major 120, minors 0-4).
- You can use this driver to access the general port bits. It supports
- these ioctl's:
- #include <linux/etraxgpio.h>
- fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
- err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
- Remember that you need to setup the port directions appropriately in
- the General configuration.
-
-config ETRAX_VIRTUAL_GPIO
- bool "Virtual GPIO support"
- depends on ETRAX_GPIO
- help
- Enables the virtual Etrax general port device (major 120, minor 6).
- It uses an I/O expander for the I2C-bus.
-
-config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN
- int "Virtual GPIO interrupt pin on PA pin"
- range 0 7
- depends on ETRAX_VIRTUAL_GPIO
- help
- The pin to use on PA for virtual gpio interrupt.
-
-config ETRAX_PA_CHANGEABLE_DIR
- hex "PA user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PA that a
- user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PA_CHANGEABLE_BITS
- hex "PA user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PA
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PB_CHANGEABLE_DIR
- hex "PB user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PB
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PB_CHANGEABLE_BITS
- hex "PB user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PB
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PC_CHANGEABLE_DIR
- hex "PC user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PC
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PC_CHANGEABLE_BITS
- hex "PC user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PC
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PD_CHANGEABLE_DIR
- hex "PD user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask with information of what bits in PD
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PD_CHANGEABLE_BITS
- hex "PD user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PD
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PE_CHANGEABLE_DIR
- hex "PE user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PE_CHANGEABLE_BITS
- hex "PE user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PV_CHANGEABLE_DIR
- hex "PV user changeable dir mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x0000 here, but it depends on your hardware.
-
-config ETRAX_PV_CHANGEABLE_BITS
- hex "PV user changeable bits mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32
obj-$(CONFIG_ETRAXFS) += mach-fs/
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/
obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o
-obj-$(CONFIG_ETRAX_I2C) += i2c.o
obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o
obj-$(CONFIG_PCI) += pci/
#if 0 /* Dump flash memory so we can see what is going on */
if (main_mtd) {
- int sectoraddr, i;
+ int sectoraddr;
for (sectoraddr = 0; sectoraddr < 2*65536+4096;
sectoraddr += PAGESIZE) {
main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len,
printk(KERN_INFO
"Sector at %d (length %d):\n",
sectoraddr, len);
- for (i = 0; i < PAGESIZE; i += 16) {
- printk(KERN_INFO
- "%02x %02x %02x %02x "
- "%02x %02x %02x %02x "
- "%02x %02x %02x %02x "
- "%02x %02x %02x %02x\n",
- page[i] & 255, page[i+1] & 255,
- page[i+2] & 255, page[i+3] & 255,
- page[i+4] & 255, page[i+5] & 255,
- page[i+6] & 255, page[i+7] & 255,
- page[i+8] & 255, page[i+9] & 255,
- page[i+10] & 255, page[i+11] & 255,
- page[i+12] & 255, page[i+13] & 255,
- page[i+14] & 255, page[i+15] & 255);
- }
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, page, PAGESIZE, false);
}
}
#endif
#if 0 /* Dump partition table so we can see what is going on */
printk(KERN_INFO
- "axisflashmap: flash read %d bytes at 0x%08x, data: "
- "%02x %02x %02x %02x %02x %02x %02x %02x\n",
- len, CONFIG_ETRAX_PTABLE_SECTOR,
- page[0] & 255, page[1] & 255,
- page[2] & 255, page[3] & 255,
- page[4] & 255, page[5] & 255,
- page[6] & 255, page[7] & 255);
+ "axisflashmap: flash read %d bytes at 0x%08x, data: %8ph\n",
+ len, CONFIG_ETRAX_PTABLE_SECTOR, page);
printk(KERN_INFO
- "axisflashmap: partition table offset %d, data: "
- "%02x %02x %02x %02x %02x %02x %02x %02x\n",
- PARTITION_TABLE_OFFSET,
- page[PARTITION_TABLE_OFFSET+0] & 255,
- page[PARTITION_TABLE_OFFSET+1] & 255,
- page[PARTITION_TABLE_OFFSET+2] & 255,
- page[PARTITION_TABLE_OFFSET+3] & 255,
- page[PARTITION_TABLE_OFFSET+4] & 255,
- page[PARTITION_TABLE_OFFSET+5] & 255,
- page[PARTITION_TABLE_OFFSET+6] & 255,
- page[PARTITION_TABLE_OFFSET+7] & 255);
+ "axisflashmap: partition table offset %d, data: %8ph\n",
+ PARTITION_TABLE_OFFSET, page + PARTITION_TABLE_OFFSET);
#endif
}
+++ /dev/null
-/*!***************************************************************************
-*!
-*! FILE NAME : i2c.c
-*!
-*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
-*! kernel modules (i2c_writereg/readreg) and from userspace using
-*! ioctl()'s
-*!
-*! Nov 30 1998 Torbjorn Eliasson Initial version.
-*! Bjorn Wesen Elinux kernel version.
-*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
-*! don't use PB_I2C if DS1302 uses same bits,
-*! use PB.
-*| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now
-*| generates nack on last received byte,
-*| instead of ack.
-*| i2c_getack changed data level while clock
-*| was high, causing DS75 to see a stop condition
-*!
-*! ---------------------------------------------------------------------------
-*!
-*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
-*!
-*!***************************************************************************/
-
-/****************** INCLUDE FILES SECTION ***********************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxi2c.h>
-
-#include <asm/io.h>
-#include <asm/delay.h>
-
-#include "i2c.h"
-
-/****************** I2C DEFINITION SECTION *************************/
-
-#define D(x)
-
-#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
-static DEFINE_MUTEX(i2c_mutex);
-static const char i2c_name[] = "i2c";
-
-#define CLOCK_LOW_TIME 8
-#define CLOCK_HIGH_TIME 8
-#define START_CONDITION_HOLD_TIME 8
-#define STOP_CONDITION_HOLD_TIME 8
-#define ENABLE_OUTPUT 0x01
-#define ENABLE_INPUT 0x00
-#define I2C_CLOCK_HIGH 1
-#define I2C_CLOCK_LOW 0
-#define I2C_DATA_HIGH 1
-#define I2C_DATA_LOW 0
-
-#define i2c_enable()
-#define i2c_disable()
-
-/* enable or disable output-enable, to select output or input on the i2c bus */
-
-#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out)
-#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in)
-
-/* control the i2c clock and data signals */
-
-#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x)
-#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x)
-
-/* read a bit from the i2c interface */
-
-#define i2c_getbit() crisv32_io_rd(&cris_i2c_data)
-
-#define i2c_delay(usecs) udelay(usecs)
-
-static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
-
-/****************** VARIABLE SECTION ************************************/
-
-static struct crisv32_iopin cris_i2c_clk;
-static struct crisv32_iopin cris_i2c_data;
-
-/****************** FUNCTION DEFINITION SECTION *************************/
-
-
-/* generate i2c start condition */
-
-void
-i2c_start(void)
-{
- /*
- * SCL=1 SDA=1
- */
- i2c_dir_out();
- i2c_delay(CLOCK_HIGH_TIME/6);
- i2c_data(I2C_DATA_HIGH);
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
- /*
- * SCL=1 SDA=0
- */
- i2c_data(I2C_DATA_LOW);
- i2c_delay(START_CONDITION_HOLD_TIME);
- /*
- * SCL=0 SDA=0
- */
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME);
-}
-
-/* generate i2c stop condition */
-
-void
-i2c_stop(void)
-{
- i2c_dir_out();
-
- /*
- * SCL=0 SDA=0
- */
- i2c_clk(I2C_CLOCK_LOW);
- i2c_data(I2C_DATA_LOW);
- i2c_delay(CLOCK_LOW_TIME*2);
- /*
- * SCL=1 SDA=0
- */
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME*2);
- /*
- * SCL=1 SDA=1
- */
- i2c_data(I2C_DATA_HIGH);
- i2c_delay(STOP_CONDITION_HOLD_TIME);
-
- i2c_dir_in();
-}
-
-/* write a byte to the i2c interface */
-
-void
-i2c_outbyte(unsigned char x)
-{
- int i;
-
- i2c_dir_out();
-
- for (i = 0; i < 8; i++) {
- if (x & 0x80) {
- i2c_data(I2C_DATA_HIGH);
- } else {
- i2c_data(I2C_DATA_LOW);
- }
-
- i2c_delay(CLOCK_LOW_TIME/2);
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME/2);
- x <<= 1;
- }
- i2c_data(I2C_DATA_LOW);
- i2c_delay(CLOCK_LOW_TIME/2);
-
- /*
- * enable input
- */
- i2c_dir_in();
-}
-
-/* read a byte from the i2c interface */
-
-unsigned char
-i2c_inbyte(void)
-{
- unsigned char aBitByte = 0;
- int i;
-
- /* Switch off I2C to get bit */
- i2c_disable();
- i2c_dir_in();
- i2c_delay(CLOCK_HIGH_TIME/2);
-
- /* Get bit */
- aBitByte |= i2c_getbit();
-
- /* Enable I2C */
- i2c_enable();
- i2c_delay(CLOCK_LOW_TIME/2);
-
- for (i = 1; i < 8; i++) {
- aBitByte <<= 1;
- /* Clock pulse */
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME);
-
- /* Switch off I2C to get bit */
- i2c_disable();
- i2c_dir_in();
- i2c_delay(CLOCK_HIGH_TIME/2);
-
- /* Get bit */
- aBitByte |= i2c_getbit();
-
- /* Enable I2C */
- i2c_enable();
- i2c_delay(CLOCK_LOW_TIME/2);
- }
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
-
- /*
- * we leave the clock low, getbyte is usually followed
- * by sendack/nack, they assume the clock to be low
- */
- i2c_clk(I2C_CLOCK_LOW);
- return aBitByte;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_getack
-*#
-*# DESCRIPTION : checks if ack was received from ic2
-*#
-*#--------------------------------------------------------------------------*/
-
-int
-i2c_getack(void)
-{
- int ack = 1;
- /*
- * enable output
- */
- i2c_dir_out();
- /*
- * Release data bus by setting
- * data high
- */
- i2c_data(I2C_DATA_HIGH);
- /*
- * enable input
- */
- i2c_dir_in();
- i2c_delay(CLOCK_HIGH_TIME/4);
- /*
- * generate ACK clock pulse
- */
- i2c_clk(I2C_CLOCK_HIGH);
-#if 0
- /*
- * Use PORT PB instead of I2C
- * for input. (I2C not working)
- */
- i2c_clk(1);
- i2c_data(1);
- /*
- * switch off I2C
- */
- i2c_data(1);
- i2c_disable();
- i2c_dir_in();
-#endif
-
- /*
- * now wait for ack
- */
- i2c_delay(CLOCK_HIGH_TIME/2);
- /*
- * check for ack
- */
- if (i2c_getbit())
- ack = 0;
- i2c_delay(CLOCK_HIGH_TIME/2);
- if (!ack) {
- if (!i2c_getbit()) /* receiver pulld SDA low */
- ack = 1;
- i2c_delay(CLOCK_HIGH_TIME/2);
- }
-
- /*
- * our clock is high now, make sure data is low
- * before we enable our output. If we keep data high
- * and enable output, we would generate a stop condition.
- */
-#if 0
- i2c_data(I2C_DATA_LOW);
-
- /*
- * end clock pulse
- */
- i2c_enable();
- i2c_dir_out();
-#endif
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_HIGH_TIME/4);
- /*
- * enable output
- */
- i2c_dir_out();
- /*
- * remove ACK clock pulse
- */
- i2c_data(I2C_DATA_HIGH);
- i2c_delay(CLOCK_LOW_TIME/2);
- return ack;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: I2C::sendAck
-*#
-*# DESCRIPTION : Send ACK on received data
-*#
-*#--------------------------------------------------------------------------*/
-void
-i2c_sendack(void)
-{
- /*
- * enable output
- */
- i2c_delay(CLOCK_LOW_TIME);
- i2c_dir_out();
- /*
- * set ack pulse high
- */
- i2c_data(I2C_DATA_LOW);
- /*
- * generate clock pulse
- */
- i2c_delay(CLOCK_HIGH_TIME/6);
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME/6);
- /*
- * reset data out
- */
- i2c_data(I2C_DATA_HIGH);
- i2c_delay(CLOCK_LOW_TIME);
-
- i2c_dir_in();
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_sendnack
-*#
-*# DESCRIPTION : Sends NACK on received data
-*#
-*#--------------------------------------------------------------------------*/
-void
-i2c_sendnack(void)
-{
- /*
- * enable output
- */
- i2c_delay(CLOCK_LOW_TIME);
- i2c_dir_out();
- /*
- * set data high
- */
- i2c_data(I2C_DATA_HIGH);
- /*
- * generate clock pulse
- */
- i2c_delay(CLOCK_HIGH_TIME/6);
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME);
-
- i2c_dir_in();
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_write
-*#
-*# DESCRIPTION : Writes a value to an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_write(unsigned char theSlave, void *data, size_t nbytes)
-{
- int error, cntr = 3;
- unsigned char bytes_wrote = 0;
- unsigned char value;
- unsigned long flags;
-
- spin_lock_irqsave(&i2c_lock, flags);
-
- do {
- error = 0;
-
- i2c_start();
- /*
- * send slave address
- */
- i2c_outbyte((theSlave & 0xfe));
- /*
- * wait for ack
- */
- if (!i2c_getack())
- error = 1;
- /*
- * send data
- */
- for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) {
- memcpy(&value, data + bytes_wrote, sizeof value);
- i2c_outbyte(value);
- /*
- * now it's time to wait for ack
- */
- if (!i2c_getack())
- error |= 4;
- }
- /*
- * end byte stream
- */
- i2c_stop();
-
- } while (error && cntr--);
-
- i2c_delay(CLOCK_LOW_TIME);
-
- spin_unlock_irqrestore(&i2c_lock, flags);
-
- return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_read
-*#
-*# DESCRIPTION : Reads a value from an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_read(unsigned char theSlave, void *data, size_t nbytes)
-{
- unsigned char b = 0;
- unsigned char bytes_read = 0;
- int error, cntr = 3;
- unsigned long flags;
-
- spin_lock_irqsave(&i2c_lock, flags);
-
- do {
- error = 0;
- memset(data, 0, nbytes);
- /*
- * generate start condition
- */
- i2c_start();
- /*
- * send slave address
- */
- i2c_outbyte((theSlave | 0x01));
- /*
- * wait for ack
- */
- if (!i2c_getack())
- error = 1;
- /*
- * fetch data
- */
- for (bytes_read = 0; bytes_read < nbytes; bytes_read++) {
- b = i2c_inbyte();
- memcpy(data + bytes_read, &b, sizeof b);
-
- if (bytes_read < (nbytes - 1))
- i2c_sendack();
- }
- /*
- * last received byte needs to be nacked
- * instead of acked
- */
- i2c_sendnack();
- /*
- * end sequence
- */
- i2c_stop();
- } while (error && cntr--);
-
- spin_unlock_irqrestore(&i2c_lock, flags);
-
- return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_writereg
-*#
-*# DESCRIPTION : Writes a value to an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_writereg(unsigned char theSlave, unsigned char theReg,
- unsigned char theValue)
-{
- int error, cntr = 3;
- unsigned long flags;
-
- spin_lock_irqsave(&i2c_lock, flags);
-
- do {
- error = 0;
-
- i2c_start();
- /*
- * send slave address
- */
- i2c_outbyte((theSlave & 0xfe));
- /*
- * wait for ack
- */
- if(!i2c_getack())
- error = 1;
- /*
- * now select register
- */
- i2c_dir_out();
- i2c_outbyte(theReg);
- /*
- * now it's time to wait for ack
- */
- if(!i2c_getack())
- error |= 2;
- /*
- * send register register data
- */
- i2c_outbyte(theValue);
- /*
- * now it's time to wait for ack
- */
- if(!i2c_getack())
- error |= 4;
- /*
- * end byte stream
- */
- i2c_stop();
- } while(error && cntr--);
-
- i2c_delay(CLOCK_LOW_TIME);
-
- spin_unlock_irqrestore(&i2c_lock, flags);
-
- return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_readreg
-*#
-*# DESCRIPTION : Reads a value from the decoder registers.
-*#
-*#--------------------------------------------------------------------------*/
-unsigned char
-i2c_readreg(unsigned char theSlave, unsigned char theReg)
-{
- unsigned char b = 0;
- int error, cntr = 3;
- unsigned long flags;
-
- spin_lock_irqsave(&i2c_lock, flags);
-
- do {
- error = 0;
- /*
- * generate start condition
- */
- i2c_start();
-
- /*
- * send slave address
- */
- i2c_outbyte((theSlave & 0xfe));
- /*
- * wait for ack
- */
- if(!i2c_getack())
- error = 1;
- /*
- * now select register
- */
- i2c_dir_out();
- i2c_outbyte(theReg);
- /*
- * now it's time to wait for ack
- */
- if(!i2c_getack())
- error |= 2;
- /*
- * repeat start condition
- */
- i2c_delay(CLOCK_LOW_TIME);
- i2c_start();
- /*
- * send slave address
- */
- i2c_outbyte(theSlave | 0x01);
- /*
- * wait for ack
- */
- if(!i2c_getack())
- error |= 4;
- /*
- * fetch register
- */
- b = i2c_inbyte();
- /*
- * last received byte needs to be nacked
- * instead of acked
- */
- i2c_sendnack();
- /*
- * end sequence
- */
- i2c_stop();
-
- } while(error && cntr--);
-
- spin_unlock_irqrestore(&i2c_lock, flags);
-
- return b;
-}
-
-static int
-i2c_open(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-static int
-i2c_release(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-/* Main device API. ioctl's to write or read to/from i2c registers.
- */
-
-static long
-i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- int ret;
- if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
- return -ENOTTY;
- }
-
- switch (_IOC_NR(cmd)) {
- case I2C_WRITEREG:
- /* write to an i2c slave */
- D(printk("i2cw %d %d %d\n",
- I2C_ARGSLAVE(arg),
- I2C_ARGREG(arg),
- I2C_ARGVALUE(arg)));
-
- mutex_lock(&i2c_mutex);
- ret = i2c_writereg(I2C_ARGSLAVE(arg),
- I2C_ARGREG(arg),
- I2C_ARGVALUE(arg));
- mutex_unlock(&i2c_mutex);
- return ret;
-
- case I2C_READREG:
- {
- unsigned char val;
- /* read from an i2c slave */
- D(printk("i2cr %d %d ",
- I2C_ARGSLAVE(arg),
- I2C_ARGREG(arg)));
- mutex_lock(&i2c_mutex);
- val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
- mutex_unlock(&i2c_mutex);
- D(printk("= %d\n", val));
- return val;
- }
- default:
- return -EINVAL;
-
- }
-
- return 0;
-}
-
-static const struct file_operations i2c_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = i2c_ioctl,
- .open = i2c_open,
- .release = i2c_release,
- .llseek = noop_llseek,
-};
-
-static int __init i2c_init(void)
-{
- static int res;
- static int first = 1;
-
- if (!first)
- return res;
-
- first = 0;
-
- /* Setup and enable the DATA and CLK pins */
-
- res = crisv32_io_get_name(&cris_i2c_data,
- CONFIG_ETRAX_V32_I2C_DATA_PORT);
- if (res < 0)
- return res;
-
- res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_V32_I2C_CLK_PORT);
- crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out);
-
- return res;
-}
-
-
-static int __init i2c_register(void)
-{
- int res;
-
- res = i2c_init();
- if (res < 0)
- return res;
-
- /* register char device */
-
- res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
- if (res < 0) {
- printk(KERN_ERR "i2c: couldn't get a major number.\n");
- return res;
- }
-
- printk(KERN_INFO
- "I2C driver v2.2, (c) 1999-2007 Axis Communications AB\n");
-
- return 0;
-}
-/* this makes sure that i2c_init is called during boot */
-module_init(i2c_register);
-
-/****************** END OF FILE i2c.c ********************************/
+++ /dev/null
-
-#include <linux/init.h>
-
-/* High level I2C actions */
-int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-/* Low level I2C */
-void i2c_start(void);
-void i2c_stop(void);
-void i2c_outbyte(unsigned char x);
-unsigned char i2c_inbyte(void);
-int i2c_getack(void);
-void i2c_sendack(void);
#
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
-obj-$(CONFIG_ETRAX_GPIO) += gpio.o
+++ /dev/null
-/*
- * Artec-3 general port I/O device
- *
- * Copyright (c) 2007 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Ola Knutsson (LED handling)
- * Johan Adolfsson (read/set directions, write, port G,
- * port to ETRAX FS.
- * Ricard Wanderlof (PWM for Artpec-3)
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxgpio.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-#include <hwregs/intr_vect_defs.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pinmux.h>
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#include "../i2c.h"
-
-#define VIRT_I2C_ADDR 0x40
-#endif
-
-/* The following gio ports on ARTPEC-3 is available:
- * pa 32 bits
- * pb 32 bits
- * pc 16 bits
- * each port has a rw_px_dout, r_px_din and rw_px_oe register.
- */
-
-#define GPIO_MAJOR 120 /* experimental MAJOR number */
-
-#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
-
-#define D(x)
-
-#if 0
-static int dp_cnt;
-#define DP(x) \
- do { \
- dp_cnt++; \
- if (dp_cnt % 1000 == 0) \
- x; \
- } while (0)
-#else
-#define DP(x)
-#endif
-
-static DEFINE_MUTEX(gpio_mutex);
-static char gpio_name[] = "etrax gpio";
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg);
-#endif
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static ssize_t gpio_write(struct file *file, const char __user *buf,
- size_t count, loff_t *off);
-static int gpio_open(struct inode *inode, struct file *filp);
-static int gpio_release(struct inode *inode, struct file *filp);
-static unsigned int gpio_poll(struct file *filp,
- struct poll_table_struct *wait);
-
-/* private data per open() of this driver */
-
-struct gpio_private {
- struct gpio_private *next;
- /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
- unsigned char clk_mask;
- unsigned char data_mask;
- unsigned char write_msb;
- unsigned char pad1;
- /* These fields are generic */
- unsigned long highalarm, lowalarm;
- wait_queue_head_t alarm_wq;
- int minor;
-};
-
-static void gpio_set_alarm(struct gpio_private *priv);
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
-static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
- unsigned long arg);
-
-
-/* linked list of alarms to check for */
-
-static struct gpio_private *alarmlist;
-
-static int wanted_interrupts;
-
-static DEFINE_SPINLOCK(gpio_lock);
-
-#define NUM_PORTS (GPIO_MINOR_LAST+1)
-#define GIO_REG_RD_ADDR(reg) \
- (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-#define GIO_REG_WR_ADDR(reg) \
- (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
-static unsigned long led_dummy;
-static unsigned long port_d_dummy; /* Only input on Artpec-3 */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static unsigned long port_e_dummy; /* Non existent on Artpec-3 */
-static unsigned long virtual_dummy;
-static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
-static unsigned short cached_virtual_gpio_read;
-#endif
-
-static unsigned long *data_out[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_dout),
- GIO_REG_WR_ADDR(rw_pb_dout),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_dout),
- &port_d_dummy,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_dummy,
-#endif
-};
-
-static unsigned long *data_in[NUM_PORTS] = {
- GIO_REG_RD_ADDR(r_pa_din),
- GIO_REG_RD_ADDR(r_pb_din),
- &led_dummy,
- GIO_REG_RD_ADDR(r_pc_din),
- GIO_REG_RD_ADDR(r_pd_din),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_dummy,
-#endif
-};
-
-static unsigned long changeable_dir[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_DIR,
- CONFIG_ETRAX_PB_CHANGEABLE_DIR,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_DIR,
- 0,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- 0,
- CONFIG_ETRAX_PV_CHANGEABLE_DIR,
-#endif
-};
-
-static unsigned long changeable_bits[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_BITS,
- CONFIG_ETRAX_PB_CHANGEABLE_BITS,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_BITS,
- 0,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- 0,
- CONFIG_ETRAX_PV_CHANGEABLE_BITS,
-#endif
-};
-
-static unsigned long *dir_oe[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_oe),
- GIO_REG_WR_ADDR(rw_pb_oe),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_oe),
- &port_d_dummy,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_rw_pv_oe,
-#endif
-};
-
-static void gpio_set_alarm(struct gpio_private *priv)
-{
- int bit;
- int intr_cfg;
- int mask;
- int pins;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
- intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
- pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
- mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
-
- for (bit = 0; bit < 32; bit++) {
- int intr = bit % 8;
- int pin = bit / 8;
- if (priv->minor < GPIO_MINOR_LEDS)
- pin += priv->minor * 4;
- else
- pin += (priv->minor - 1) * 4;
-
- if (priv->highalarm & (1<<bit)) {
- intr_cfg |= (regk_gio_hi << (intr * 3));
- mask |= 1 << intr;
- wanted_interrupts = mask & 0xff;
- pins |= pin << (intr * 4);
- } else if (priv->lowalarm & (1<<bit)) {
- intr_cfg |= (regk_gio_lo << (intr * 3));
- mask |= 1 << intr;
- wanted_interrupts = mask & 0xff;
- pins |= pin << (intr * 4);
- }
- }
-
- REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
- REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
-{
- unsigned int mask = 0;
- struct gpio_private *priv = file->private_data;
- unsigned long data;
- unsigned long tmp;
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return 0;
-
- poll_wait(file, &priv->alarm_wq, wait);
- if (priv->minor <= GPIO_MINOR_D) {
- data = readl(data_in[priv->minor]);
- REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
- tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
- tmp &= I2C_INTERRUPT_BITS;
- tmp |= wanted_interrupts;
- REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
- } else
- return 0;
-
- if ((data & priv->highalarm) || (~data & priv->lowalarm))
- mask = POLLIN|POLLRDNORM;
-
- DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
- return mask;
-}
-
-static irqreturn_t gpio_interrupt(int irq, void *dev_id)
-{
- reg_gio_rw_intr_mask intr_mask;
- reg_gio_r_masked_intr masked_intr;
- reg_gio_rw_ack_intr ack_intr;
- unsigned long flags;
- unsigned long tmp;
- unsigned long tmp2;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- unsigned char enable_gpiov_ack = 0;
-#endif
-
- /* Find what PA interrupts are active */
- masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
- tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
-
- /* Find those that we have enabled */
- spin_lock_irqsave(&gpio_lock, flags);
- tmp &= wanted_interrupts;
- spin_unlock_irqrestore(&gpio_lock, flags);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Something changed on virtual GPIO. Interrupt is acked by
- * reading the device.
- */
- if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
- i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
- sizeof(cached_virtual_gpio_read));
- enable_gpiov_ack = 1;
- }
-#endif
-
- /* Ack them */
- ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
- REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
-
- /* Disable those interrupts.. */
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
- tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
- tmp2 &= ~tmp;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Do not disable interrupt on virtual GPIO. Changes on virtual
- * pins are only noticed by an interrupt.
- */
- if (enable_gpiov_ack)
- tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- return IRQ_RETVAL(tmp);
-}
-
-static void gpio_write_bit(unsigned long *port, unsigned char data, int bit,
- unsigned char clk_mask, unsigned char data_mask)
-{
- unsigned long shadow = readl(port) & ~clk_mask;
- writel(shadow, port);
- if (data & 1 << bit)
- shadow |= data_mask;
- else
- shadow &= ~data_mask;
- writel(shadow, port);
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- shadow |= clk_mask;
- writel(shadow, port);
-}
-
-static void gpio_write_byte(struct gpio_private *priv, unsigned long *port,
- unsigned char data)
-{
- int i;
-
- if (priv->write_msb)
- for (i = 7; i >= 0; i--)
- gpio_write_bit(port, data, i, priv->clk_mask,
- priv->data_mask);
- else
- for (i = 0; i <= 7; i++)
- gpio_write_bit(port, data, i, priv->clk_mask,
- priv->data_mask);
-}
-
-
-static ssize_t gpio_write(struct file *file, const char __user *buf,
- size_t count, loff_t *off)
-{
- struct gpio_private *priv = file->private_data;
- unsigned long flags;
- ssize_t retval = count;
- /* Only bits 0-7 may be used for write operations but allow all
- devices except leds... */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return -EFAULT;
-#endif
- if (priv->minor == GPIO_MINOR_LEDS)
- return -EFAULT;
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return -EFAULT;
-
- if (!access_ok(VERIFY_READ, buf, count))
- return -EFAULT;
-
- /* It must have been configured using the IO_CFG_WRITE_MODE */
- /* Perhaps a better error code? */
- if (priv->clk_mask == 0 || priv->data_mask == 0)
- return -EPERM;
-
- D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
- "msb: %i\n",
- count, priv->data_mask, priv->clk_mask, priv->write_msb));
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- while (count--)
- gpio_write_byte(priv, data_out[priv->minor], *buf++);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return retval;
-}
-
-static int gpio_open(struct inode *inode, struct file *filp)
-{
- struct gpio_private *priv;
- int p = iminor(inode);
-
- if (p > GPIO_MINOR_LAST_PWM ||
- (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
- return -EINVAL;
-
- priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
-
- if (!priv)
- return -ENOMEM;
-
- mutex_lock(&gpio_mutex);
- memset(priv, 0, sizeof(*priv));
-
- priv->minor = p;
- filp->private_data = priv;
-
- /* initialize the io/alarm struct, not for PWM ports though */
- if (p <= GPIO_MINOR_LAST) {
-
- priv->clk_mask = 0;
- priv->data_mask = 0;
- priv->highalarm = 0;
- priv->lowalarm = 0;
-
- init_waitqueue_head(&priv->alarm_wq);
-
- /* link it into our alarmlist */
- spin_lock_irq(&gpio_lock);
- priv->next = alarmlist;
- alarmlist = priv;
- spin_unlock_irq(&gpio_lock);
- }
-
- mutex_unlock(&gpio_mutex);
- return 0;
-}
-
-static int gpio_release(struct inode *inode, struct file *filp)
-{
- struct gpio_private *p;
- struct gpio_private *todel;
- /* local copies while updating them: */
- unsigned long a_high, a_low;
-
- /* prepare to free private structure */
- todel = filp->private_data;
-
- /* unlink from alarmlist - only for non-PWM ports though */
- if (todel->minor <= GPIO_MINOR_LAST) {
- spin_lock_irq(&gpio_lock);
- p = alarmlist;
-
- if (p == todel)
- alarmlist = todel->next;
- else {
- while (p->next != todel)
- p = p->next;
- p->next = todel->next;
- }
-
- /* Check if there are still any alarms set */
- p = alarmlist;
- a_high = 0;
- a_low = 0;
- while (p) {
- if (p->minor == GPIO_MINOR_A) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- a_high |= p->highalarm;
- a_low |= p->lowalarm;
- }
-
- p = p->next;
- }
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Variable 'a_low' needs to be set here again
- * to ensure that interrupt for virtual GPIO is handled.
- */
- a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
-
- spin_unlock_irq(&gpio_lock);
- }
- kfree(todel);
-
- return 0;
-}
-
-/* Main device API. ioctl's to read/set/clear bits, as well as to
- * set alarms to wait for using a subsequent select().
- */
-
-inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
-{
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- unsigned long flags;
- unsigned long dir_shadow;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- dir_shadow = readl(dir_oe[priv->minor]) &
- ~(arg & changeable_dir[priv->minor]);
- writel(dir_shadow, dir_oe[priv->minor]);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- if (priv->minor == GPIO_MINOR_C)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- else if (priv->minor == GPIO_MINOR_V)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#endif
- else
- dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
-
- return dir_shadow;
-
-} /* setget_input */
-
-static inline unsigned long setget_output(struct gpio_private *priv,
- unsigned long arg)
-{
- unsigned long flags;
- unsigned long dir_shadow;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- dir_shadow = readl(dir_oe[priv->minor]) |
- (arg & changeable_dir[priv->minor]);
- writel(dir_shadow, dir_oe[priv->minor]);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return dir_shadow;
-} /* setget_output */
-
-static long gpio_ioctl_unlocked(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned long val;
- unsigned long shadow;
- struct gpio_private *priv = file->private_data;
-
- if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
- return -ENOTTY;
-
- /* Check for special ioctl handlers first */
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return virtual_gpio_ioctl(file, cmd, arg);
-#endif
-
- if (priv->minor == GPIO_MINOR_LEDS)
- return gpio_leds_ioctl(cmd, arg);
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return gpio_pwm_ioctl(priv, cmd, arg);
-
- switch (_IOC_NR(cmd)) {
- case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
- /* Read the port. */
- return readl(data_in[priv->minor]);
- case IO_SETBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Set changeable bits with a 1 in arg. */
- shadow = readl(data_out[priv->minor]) |
- (arg & changeable_bits[priv->minor]);
- writel(shadow, data_out[priv->minor]);
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_CLRBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Clear changeable bits with a 1 in arg. */
- shadow = readl(data_out[priv->minor]) &
- ~(arg & changeable_bits[priv->minor]);
- writel(shadow, data_out[priv->minor]);
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- gpio_set_alarm(priv);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- gpio_set_alarm(priv);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- gpio_set_alarm(priv);
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
- /* Read direction 0=input 1=output */
- return readl(dir_oe[priv->minor]);
-
- case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- return setget_input(priv, arg);
-
- case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
- /* Set direction 0=unchanged 1=output,
- * return mask with 1=output
- */
- return setget_output(priv, arg);
-
- case IO_CFG_WRITE_MODE:
- {
- int res = -EPERM;
- unsigned long dir_shadow, clk_mask, data_mask, write_msb;
-
- clk_mask = arg & 0xFF;
- data_mask = (arg >> 8) & 0xFF;
- write_msb = (arg >> 16) & 0x01;
-
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- spin_lock_irqsave(&gpio_lock, flags);
- dir_shadow = readl(dir_oe[priv->minor]);
- if ((clk_mask & changeable_bits[priv->minor]) &&
- (data_mask & changeable_bits[priv->minor]) &&
- (clk_mask & dir_shadow) &&
- (data_mask & dir_shadow)) {
- priv->clk_mask = clk_mask;
- priv->data_mask = data_mask;
- priv->write_msb = write_msb;
- res = 0;
- }
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return res;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = readl(data_in[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- val = *data_out[priv->minor];
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- mutex_lock(&gpio_mutex);
- ret = gpio_ioctl_unlocked(file, cmd, arg);
- mutex_unlock(&gpio_mutex);
-
- return ret;
-}
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- unsigned long flags;
- unsigned short val;
- unsigned short shadow;
- struct gpio_private *priv = file->private_data;
-
- switch (_IOC_NR(cmd)) {
- case IO_SETBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Set changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~readl(dir_oe[priv->minor]) |
- (arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_CLRBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Clear changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~readl(dir_oe[priv->minor]) &
- ~(arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- break;
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = readl(dir_oe[priv->minor]);
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
-
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
- val &= readl(dir_oe[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- {
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- unsigned short input_mask = ~readl(dir_oe[priv->minor]);
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- if ((input_mask & val) != input_mask) {
- /* Input pins changed. All ports desired as input
- * should be set to logic 1.
- */
- unsigned short change = input_mask ^ val;
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- shadow &= ~change;
- shadow |= val;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- }
- break;
- }
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
- return 0;
-}
-#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
-
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
-{
- unsigned char green;
- unsigned char red;
-
- switch (_IOC_NR(cmd)) {
- case IO_LEDACTIVE_SET:
- green = ((unsigned char) arg) & 1;
- red = (((unsigned char) arg) >> 1) & 1;
- CRIS_LED_ACTIVE_SET_G(green);
- CRIS_LED_ACTIVE_SET_R(red);
- break;
-
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
-{
- int pinmux_pwm = pinmux_pwm0 + pwm_port;
- int mode;
- reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
- .ccd_val = 0,
- .ccd_override = regk_gio_no,
- .mode = regk_gio_no
- };
- int allocstatus;
-
- if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
- return -EFAULT;
- rw_pwm_ctrl.mode = mode;
- if (mode != PWM_OFF)
- allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
- else
- allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
- if (allocstatus)
- return allocstatus;
- REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
- 12 * pwm_port, rw_pwm_ctrl);
- return 0;
-}
-
-static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
-{
- struct io_pwm_set_period periods;
- reg_gio_rw_pwm0_var rw_pwm_widths;
-
- if (copy_from_user(&periods, (void __user *)arg, sizeof(periods)))
- return -EFAULT;
- if (periods.lo > 8191 || periods.hi > 8191)
- return -EINVAL;
- rw_pwm_widths.lo = periods.lo;
- rw_pwm_widths.hi = periods.hi;
- REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
- 12 * pwm_port, rw_pwm_widths);
- return 0;
-}
-
-static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
-{
- unsigned int duty;
- reg_gio_rw_pwm0_data rw_pwm_duty;
-
- if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
- return -EFAULT;
- if (duty > 255)
- return -EINVAL;
- rw_pwm_duty.data = duty;
- REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
- 12 * pwm_port, rw_pwm_duty);
- return 0;
-}
-
-static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
- unsigned long arg)
-{
- int pwm_port = priv->minor - GPIO_MINOR_PWM0;
-
- switch (_IOC_NR(cmd)) {
- case IO_PWM_SET_MODE:
- return gpio_pwm_set_mode(arg, pwm_port);
- case IO_PWM_SET_PERIOD:
- return gpio_pwm_set_period(arg, pwm_port);
- case IO_PWM_SET_DUTY:
- return gpio_pwm_set_duty(arg, pwm_port);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .unlocked_ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
- .llseek = noop_llseek,
-};
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static void __init virtual_gpio_init(void)
-{
- reg_gio_rw_intr_cfg intr_cfg;
- reg_gio_rw_intr_mask intr_mask;
- unsigned short shadow;
-
- shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
- shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-
- /* Set interrupt mask and on what state the interrupt shall trigger.
- * For virtual gpio the interrupt shall trigger on logic '0'.
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
-
- switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
- case 0:
- intr_cfg.pa0 = regk_gio_lo;
- intr_mask.pa0 = regk_gio_yes;
- break;
- case 1:
- intr_cfg.pa1 = regk_gio_lo;
- intr_mask.pa1 = regk_gio_yes;
- break;
- case 2:
- intr_cfg.pa2 = regk_gio_lo;
- intr_mask.pa2 = regk_gio_yes;
- break;
- case 3:
- intr_cfg.pa3 = regk_gio_lo;
- intr_mask.pa3 = regk_gio_yes;
- break;
- case 4:
- intr_cfg.pa4 = regk_gio_lo;
- intr_mask.pa4 = regk_gio_yes;
- break;
- case 5:
- intr_cfg.pa5 = regk_gio_lo;
- intr_mask.pa5 = regk_gio_yes;
- break;
- case 6:
- intr_cfg.pa6 = regk_gio_lo;
- intr_mask.pa6 = regk_gio_yes;
- break;
- case 7:
- intr_cfg.pa7 = regk_gio_lo;
- intr_mask.pa7 = regk_gio_yes;
- break;
- }
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-}
-#endif
-
-/* main driver initialization routine, called from mem.c */
-
-static int __init gpio_init(void)
-{
- int res, res2;
-
- printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 "
- "Axis Communications AB\n");
-
- /* do the formalities */
-
- res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
- if (res < 0) {
- printk(KERN_ERR "gpio: couldn't get a major number.\n");
- return res;
- }
-
- /* Clear all leds */
- CRIS_LED_NETWORK_GRP0_SET(0);
- CRIS_LED_NETWORK_GRP1_SET(0);
- CRIS_LED_ACTIVE_SET(0);
- CRIS_LED_DISK_READ(0);
- CRIS_LED_DISK_WRITE(0);
-
- res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
- IRQF_SHARED, "gpio", &alarmlist);
- if (res2) {
- printk(KERN_ERR "err: irq for gpio\n");
- return res2;
- }
-
- /* No IRQs by default. */
- REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- virtual_gpio_init();
-#endif
-
- return res;
-}
-
-/* this makes sure that gpio_init is called during kernel boot */
-
-module_init(gpio_init);
#
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
-obj-$(CONFIG_ETRAX_GPIO) += gpio.o
+++ /dev/null
-/*
- * ETRAX CRISv32 general port I/O device
- *
- * Copyright (c) 1999-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Ola Knutsson (LED handling)
- * Johan Adolfsson (read/set directions, write, port G,
- * port to ETRAX FS.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxgpio.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-#include <hwregs/intr_vect_defs.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#include "../i2c.h"
-
-#define VIRT_I2C_ADDR 0x40
-#endif
-
-/* The following gio ports on ETRAX FS is available:
- * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
- * pb 18 bits
- * pc 18 bits
- * pd 18 bits
- * pe 18 bits
- * each port has a rw_px_dout, r_px_din and rw_px_oe register.
- */
-
-#define GPIO_MAJOR 120 /* experimental MAJOR number */
-
-#define D(x)
-
-#if 0
-static int dp_cnt;
-#define DP(x) \
- do { \
- dp_cnt++; \
- if (dp_cnt % 1000 == 0) \
- x; \
- } while (0)
-#else
-#define DP(x)
-#endif
-
-static DEFINE_MUTEX(gpio_mutex);
-static char gpio_name[] = "etrax gpio";
-
-#if 0
-static wait_queue_head_t *gpio_wq;
-#endif
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg);
-#endif
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
- loff_t *off);
-static int gpio_open(struct inode *inode, struct file *filp);
-static int gpio_release(struct inode *inode, struct file *filp);
-static unsigned int gpio_poll(struct file *filp,
- struct poll_table_struct *wait);
-
-/* private data per open() of this driver */
-
-struct gpio_private {
- struct gpio_private *next;
- /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
- unsigned char clk_mask;
- unsigned char data_mask;
- unsigned char write_msb;
- unsigned char pad1;
- /* These fields are generic */
- unsigned long highalarm, lowalarm;
- wait_queue_head_t alarm_wq;
- int minor;
-};
-
-/* linked list of alarms to check for */
-
-static struct gpio_private *alarmlist;
-
-static int gpio_some_alarms; /* Set if someone uses alarm */
-static unsigned long gpio_pa_high_alarms;
-static unsigned long gpio_pa_low_alarms;
-
-static DEFINE_SPINLOCK(alarm_lock);
-
-#define NUM_PORTS (GPIO_MINOR_LAST+1)
-#define GIO_REG_RD_ADDR(reg) \
- (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-#define GIO_REG_WR_ADDR(reg) \
- (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-unsigned long led_dummy;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static unsigned long virtual_dummy;
-static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
-static unsigned short cached_virtual_gpio_read;
-#endif
-
-static volatile unsigned long *data_out[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_dout),
- GIO_REG_WR_ADDR(rw_pb_dout),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_dout),
- GIO_REG_WR_ADDR(rw_pd_dout),
- GIO_REG_WR_ADDR(rw_pe_dout),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_dummy,
-#endif
-};
-
-static volatile unsigned long *data_in[NUM_PORTS] = {
- GIO_REG_RD_ADDR(r_pa_din),
- GIO_REG_RD_ADDR(r_pb_din),
- &led_dummy,
- GIO_REG_RD_ADDR(r_pc_din),
- GIO_REG_RD_ADDR(r_pd_din),
- GIO_REG_RD_ADDR(r_pe_din),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_dummy,
-#endif
-};
-
-static unsigned long changeable_dir[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_DIR,
- CONFIG_ETRAX_PB_CHANGEABLE_DIR,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_DIR,
- CONFIG_ETRAX_PD_CHANGEABLE_DIR,
- CONFIG_ETRAX_PE_CHANGEABLE_DIR,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- CONFIG_ETRAX_PV_CHANGEABLE_DIR,
-#endif
-};
-
-static unsigned long changeable_bits[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_BITS,
- CONFIG_ETRAX_PB_CHANGEABLE_BITS,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_BITS,
- CONFIG_ETRAX_PD_CHANGEABLE_BITS,
- CONFIG_ETRAX_PE_CHANGEABLE_BITS,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- CONFIG_ETRAX_PV_CHANGEABLE_BITS,
-#endif
-};
-
-static volatile unsigned long *dir_oe[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_oe),
- GIO_REG_WR_ADDR(rw_pb_oe),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_oe),
- GIO_REG_WR_ADDR(rw_pd_oe),
- GIO_REG_WR_ADDR(rw_pe_oe),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_rw_pv_oe,
-#endif
-};
-
-
-
-static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
-{
- unsigned int mask = 0;
- struct gpio_private *priv = file->private_data;
- unsigned long data;
- poll_wait(file, &priv->alarm_wq, wait);
- if (priv->minor == GPIO_MINOR_A) {
- reg_gio_rw_intr_cfg intr_cfg;
- unsigned long tmp;
- unsigned long flags;
-
- local_irq_save(flags);
- data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din,
- REG_RD(gio, regi_gio, r_pa_din));
- /* PA has support for interrupt
- * lets activate high for those low and with highalarm set
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
-
- tmp = ~data & priv->highalarm & 0xFF;
- if (tmp & (1 << 0))
- intr_cfg.pa0 = regk_gio_hi;
- if (tmp & (1 << 1))
- intr_cfg.pa1 = regk_gio_hi;
- if (tmp & (1 << 2))
- intr_cfg.pa2 = regk_gio_hi;
- if (tmp & (1 << 3))
- intr_cfg.pa3 = regk_gio_hi;
- if (tmp & (1 << 4))
- intr_cfg.pa4 = regk_gio_hi;
- if (tmp & (1 << 5))
- intr_cfg.pa5 = regk_gio_hi;
- if (tmp & (1 << 6))
- intr_cfg.pa6 = regk_gio_hi;
- if (tmp & (1 << 7))
- intr_cfg.pa7 = regk_gio_hi;
- /*
- * lets activate low for those high and with lowalarm set
- */
- tmp = data & priv->lowalarm & 0xFF;
- if (tmp & (1 << 0))
- intr_cfg.pa0 = regk_gio_lo;
- if (tmp & (1 << 1))
- intr_cfg.pa1 = regk_gio_lo;
- if (tmp & (1 << 2))
- intr_cfg.pa2 = regk_gio_lo;
- if (tmp & (1 << 3))
- intr_cfg.pa3 = regk_gio_lo;
- if (tmp & (1 << 4))
- intr_cfg.pa4 = regk_gio_lo;
- if (tmp & (1 << 5))
- intr_cfg.pa5 = regk_gio_lo;
- if (tmp & (1 << 6))
- intr_cfg.pa6 = regk_gio_lo;
- if (tmp & (1 << 7))
- intr_cfg.pa7 = regk_gio_lo;
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- local_irq_restore(flags);
- } else if (priv->minor <= GPIO_MINOR_E)
- data = *data_in[priv->minor];
- else
- return 0;
-
- if ((data & priv->highalarm) || (~data & priv->lowalarm))
- mask = POLLIN|POLLRDNORM;
-
- DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
- return mask;
-}
-
-int etrax_gpio_wake_up_check(void)
-{
- struct gpio_private *priv;
- unsigned long data = 0;
- unsigned long flags;
- int ret = 0;
- spin_lock_irqsave(&alarm_lock, flags);
- priv = alarmlist;
- while (priv) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- data = (unsigned long)cached_virtual_gpio_read;
- else {
- data = *data_in[priv->minor];
- if (priv->minor == GPIO_MINOR_A)
- priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
- }
-#else
- data = *data_in[priv->minor];
-#endif
- if ((data & priv->highalarm) ||
- (~data & priv->lowalarm)) {
- DP(printk(KERN_DEBUG
- "etrax_gpio_wake_up_check %i\n", priv->minor));
- wake_up_interruptible(&priv->alarm_wq);
- ret = 1;
- }
- priv = priv->next;
- }
- spin_unlock_irqrestore(&alarm_lock, flags);
- return ret;
-}
-
-static irqreturn_t
-gpio_poll_timer_interrupt(int irq, void *dev_id)
-{
- if (gpio_some_alarms)
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
- return IRQ_NONE;
-}
-
-static irqreturn_t
-gpio_pa_interrupt(int irq, void *dev_id)
-{
- reg_gio_rw_intr_mask intr_mask;
- reg_gio_r_masked_intr masked_intr;
- reg_gio_rw_ack_intr ack_intr;
- unsigned long tmp;
- unsigned long tmp2;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- unsigned char enable_gpiov_ack = 0;
-#endif
-
- /* Find what PA interrupts are active */
- masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
- tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
-
- /* Find those that we have enabled */
- spin_lock(&alarm_lock);
- tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
- spin_unlock(&alarm_lock);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Something changed on virtual GPIO. Interrupt is acked by
- * reading the device.
- */
- if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
- i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
- sizeof(cached_virtual_gpio_read));
- enable_gpiov_ack = 1;
- }
-#endif
-
- /* Ack them */
- ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
- REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
-
- /* Disable those interrupts.. */
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
- tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
- tmp2 &= ~tmp;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Do not disable interrupt on virtual GPIO. Changes on virtual
- * pins are only noticed by an interrupt.
- */
- if (enable_gpiov_ack)
- tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- if (gpio_some_alarms)
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
- return IRQ_NONE;
-}
-
-
-static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
- loff_t *off)
-{
- struct gpio_private *priv = file->private_data;
- unsigned char data, clk_mask, data_mask, write_msb;
- unsigned long flags;
- unsigned long shadow;
- volatile unsigned long *port;
- ssize_t retval = count;
- /* Only bits 0-7 may be used for write operations but allow all
- devices except leds... */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return -EFAULT;
-#endif
- if (priv->minor == GPIO_MINOR_LEDS)
- return -EFAULT;
-
- if (!access_ok(VERIFY_READ, buf, count))
- return -EFAULT;
- clk_mask = priv->clk_mask;
- data_mask = priv->data_mask;
- /* It must have been configured using the IO_CFG_WRITE_MODE */
- /* Perhaps a better error code? */
- if (clk_mask == 0 || data_mask == 0)
- return -EPERM;
- write_msb = priv->write_msb;
- D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
- "msb: %i\n", count, data_mask, clk_mask, write_msb));
- port = data_out[priv->minor];
-
- while (count--) {
- int i;
- data = *buf++;
- if (priv->write_msb) {
- for (i = 7; i >= 0; i--) {
- local_irq_save(flags);
- shadow = *port;
- *port = shadow &= ~clk_mask;
- if (data & 1<<i)
- *port = shadow |= data_mask;
- else
- *port = shadow &= ~data_mask;
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- *port = shadow |= clk_mask;
- local_irq_restore(flags);
- }
- } else {
- for (i = 0; i <= 7; i++) {
- local_irq_save(flags);
- shadow = *port;
- *port = shadow &= ~clk_mask;
- if (data & 1<<i)
- *port = shadow |= data_mask;
- else
- *port = shadow &= ~data_mask;
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- *port = shadow |= clk_mask;
- local_irq_restore(flags);
- }
- }
- }
- return retval;
-}
-
-
-
-static int
-gpio_open(struct inode *inode, struct file *filp)
-{
- struct gpio_private *priv;
- int p = iminor(inode);
-
- if (p > GPIO_MINOR_LAST)
- return -EINVAL;
-
- priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- mutex_lock(&gpio_mutex);
-
- priv->minor = p;
-
- /* initialize the io/alarm struct */
-
- priv->clk_mask = 0;
- priv->data_mask = 0;
- priv->highalarm = 0;
- priv->lowalarm = 0;
- init_waitqueue_head(&priv->alarm_wq);
-
- filp->private_data = (void *)priv;
-
- /* link it into our alarmlist */
- spin_lock_irq(&alarm_lock);
- priv->next = alarmlist;
- alarmlist = priv;
- spin_unlock_irq(&alarm_lock);
-
- mutex_unlock(&gpio_mutex);
- return 0;
-}
-
-static int
-gpio_release(struct inode *inode, struct file *filp)
-{
- struct gpio_private *p;
- struct gpio_private *todel;
- /* local copies while updating them: */
- unsigned long a_high, a_low;
- unsigned long some_alarms;
-
- /* unlink from alarmlist and free the private structure */
-
- spin_lock_irq(&alarm_lock);
- p = alarmlist;
- todel = filp->private_data;
-
- if (p == todel) {
- alarmlist = todel->next;
- } else {
- while (p->next != todel)
- p = p->next;
- p->next = todel->next;
- }
-
- kfree(todel);
- /* Check if there are still any alarms set */
- p = alarmlist;
- some_alarms = 0;
- a_high = 0;
- a_low = 0;
- while (p) {
- if (p->minor == GPIO_MINOR_A) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- a_high |= p->highalarm;
- a_low |= p->lowalarm;
- }
-
- if (p->highalarm | p->lowalarm)
- some_alarms = 1;
- p = p->next;
- }
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Variables 'some_alarms' and 'a_low' needs to be set here again
- * to ensure that interrupt for virtual GPIO is handled.
- */
- some_alarms = 1;
- a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
-
- gpio_some_alarms = some_alarms;
- gpio_pa_high_alarms = a_high;
- gpio_pa_low_alarms = a_low;
- spin_unlock_irq(&alarm_lock);
-
- return 0;
-}
-
-/* Main device API. ioctl's to read/set/clear bits, as well as to
- * set alarms to wait for using a subsequent select().
- */
-
-inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
-{
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- unsigned long flags;
- unsigned long dir_shadow;
-
- local_irq_save(flags);
- dir_shadow = *dir_oe[priv->minor];
- dir_shadow &= ~(arg & changeable_dir[priv->minor]);
- *dir_oe[priv->minor] = dir_shadow;
- local_irq_restore(flags);
-
- if (priv->minor == GPIO_MINOR_A)
- dir_shadow ^= 0xFF; /* Only 8 bits */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- else if (priv->minor == GPIO_MINOR_V)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#endif
- else
- dir_shadow ^= 0x3FFFF; /* Only 18 bits */
- return dir_shadow;
-
-} /* setget_input */
-
-inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
-{
- unsigned long flags;
- unsigned long dir_shadow;
-
- local_irq_save(flags);
- dir_shadow = *dir_oe[priv->minor];
- dir_shadow |= (arg & changeable_dir[priv->minor]);
- *dir_oe[priv->minor] = dir_shadow;
- local_irq_restore(flags);
- return dir_shadow;
-} /* setget_output */
-
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
-
-static int
-gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned long val;
- unsigned long shadow;
- struct gpio_private *priv = file->private_data;
- if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
- return -EINVAL;
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return virtual_gpio_ioctl(file, cmd, arg);
-#endif
-
- switch (_IOC_NR(cmd)) {
- case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
- /* Read the port. */
- return *data_in[priv->minor];
- break;
- case IO_SETBITS:
- local_irq_save(flags);
- /* Set changeable bits with a 1 in arg. */
- shadow = *data_out[priv->minor];
- shadow |= (arg & changeable_bits[priv->minor]);
- *data_out[priv->minor] = shadow;
- local_irq_restore(flags);
- break;
- case IO_CLRBITS:
- local_irq_save(flags);
- /* Clear changeable bits with a 1 in arg. */
- shadow = *data_out[priv->minor];
- shadow &= ~(arg & changeable_bits[priv->minor]);
- *data_out[priv->minor] = shadow;
- local_irq_restore(flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A)
- gpio_pa_high_alarms |= arg;
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A)
- gpio_pa_low_alarms |= arg;
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- spin_lock_irqsave(&alarm_lock, flags);
- if (priv->minor == GPIO_MINOR_A) {
- if (gpio_pa_high_alarms & arg ||
- gpio_pa_low_alarms & arg)
- /* Must update the gpio_pa_*alarms masks */
- ;
- }
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
- /* Read direction 0=input 1=output */
- return *dir_oe[priv->minor];
- case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- return setget_input(priv, arg);
- break;
- case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
- /* Set direction 0=unchanged 1=output,
- * return mask with 1=output
- */
- return setget_output(priv, arg);
-
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = *dir_oe[priv->minor];
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = *data_in[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- break;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- val = *data_out[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- if (priv->minor == GPIO_MINOR_LEDS)
- return gpio_leds_ioctl(cmd, arg);
- else
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- mutex_lock(&gpio_mutex);
- ret = gpio_ioctl_unlocked(file, cmd, arg);
- mutex_unlock(&gpio_mutex);
-
- return ret;
-}
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int
-virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned short val;
- unsigned short shadow;
- struct gpio_private *priv = file->private_data;
-
- switch (_IOC_NR(cmd)) {
- case IO_SETBITS:
- local_irq_save(flags);
- /* Set changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~*dir_oe[priv->minor];
- shadow |= (arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- local_irq_restore(flags);
- break;
- case IO_CLRBITS:
- local_irq_save(flags);
- /* Clear changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~*dir_oe[priv->minor];
- shadow &= ~(arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- local_irq_restore(flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- spin_lock(&alarm_lock);
- gpio_some_alarms = 1;
- spin_unlock(&alarm_lock);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- spin_lock(&alarm_lock);
- gpio_some_alarms = 1;
- spin_unlock(&alarm_lock);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- spin_lock(&alarm_lock);
- spin_unlock(&alarm_lock);
- break;
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = *dir_oe[priv->minor];
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = cached_virtual_gpio_read;
- val &= ~*dir_oe[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- break;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
- val &= *dir_oe[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- {
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- unsigned short input_mask = ~*dir_oe[priv->minor];
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- if ((input_mask & val) != input_mask) {
- /* Input pins changed. All ports desired as input
- * should be set to logic 1.
- */
- unsigned short change = input_mask ^ val;
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- shadow &= ~change;
- shadow |= val;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- }
- break;
- }
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
- return 0;
-}
-#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
-
-static int
-gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
-{
- unsigned char green;
- unsigned char red;
-
- switch (_IOC_NR(cmd)) {
- case IO_LEDACTIVE_SET:
- green = ((unsigned char) arg) & 1;
- red = (((unsigned char) arg) >> 1) & 1;
- CRIS_LED_ACTIVE_SET_G(green);
- CRIS_LED_ACTIVE_SET_R(red);
- break;
-
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .unlocked_ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
- .llseek = noop_llseek,
-};
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static void
-virtual_gpio_init(void)
-{
- reg_gio_rw_intr_cfg intr_cfg;
- reg_gio_rw_intr_mask intr_mask;
- unsigned short shadow;
-
- shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
- shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-
- /* Set interrupt mask and on what state the interrupt shall trigger.
- * For virtual gpio the interrupt shall trigger on logic '0'.
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
-
- switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
- case 0:
- intr_cfg.pa0 = regk_gio_lo;
- intr_mask.pa0 = regk_gio_yes;
- break;
- case 1:
- intr_cfg.pa1 = regk_gio_lo;
- intr_mask.pa1 = regk_gio_yes;
- break;
- case 2:
- intr_cfg.pa2 = regk_gio_lo;
- intr_mask.pa2 = regk_gio_yes;
- break;
- case 3:
- intr_cfg.pa3 = regk_gio_lo;
- intr_mask.pa3 = regk_gio_yes;
- break;
- case 4:
- intr_cfg.pa4 = regk_gio_lo;
- intr_mask.pa4 = regk_gio_yes;
- break;
- case 5:
- intr_cfg.pa5 = regk_gio_lo;
- intr_mask.pa5 = regk_gio_yes;
- break;
- case 6:
- intr_cfg.pa6 = regk_gio_lo;
- intr_mask.pa6 = regk_gio_yes;
- break;
- case 7:
- intr_cfg.pa7 = regk_gio_lo;
- intr_mask.pa7 = regk_gio_yes;
- break;
- }
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
- gpio_some_alarms = 1;
-}
-#endif
-
-/* main driver initialization routine, called from mem.c */
-
-static __init int
-gpio_init(void)
-{
- int res;
-
- /* do the formalities */
-
- res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
- if (res < 0) {
- printk(KERN_ERR "gpio: couldn't get a major number.\n");
- return res;
- }
-
- /* Clear all leds */
- CRIS_LED_NETWORK_GRP0_SET(0);
- CRIS_LED_NETWORK_GRP1_SET(0);
- CRIS_LED_ACTIVE_SET(0);
- CRIS_LED_DISK_READ(0);
- CRIS_LED_DISK_WRITE(0);
-
- printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 "
- "Axis Communications AB\n");
- /* We call etrax_gpio_wake_up_check() from timer interrupt */
- if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt,
- IRQF_SHARED, "gpio poll", &alarmlist))
- printk(KERN_ERR "timer0 irq for gpio\n");
-
- if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt,
- IRQF_SHARED, "gpio PA", &alarmlist))
- printk(KERN_ERR "PA irq for gpio\n");
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- virtual_gpio_init();
-#endif
-
- return res;
-}
-
-/* this makes sure that gpio_init is called during kernel boot */
-
-module_init(gpio_init);
#include <arch/dma.h>
#include <arch/intmem.h>
#include <mach/pinmux.h>
-#include <arch/io.h>
/* Functions for allocating DMA channels */
EXPORT_SYMBOL(crisv32_request_dma);
EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed);
EXPORT_SYMBOL(crisv32_pinmux_dealloc);
EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed);
-EXPORT_SYMBOL(crisv32_io_get_name);
-EXPORT_SYMBOL(crisv32_io_get);
/* Functions masking/unmasking interrupts */
EXPORT_SYMBOL(crisv32_mask_irq);
&ports[2];
#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
&ports[3];
-#elif defined(CONFIG_ETRAX_DEBUG_PORT4)
- &ports[4];
#else
NULL;
#endif
;; For cramfs, partition starts with magic and length.
;; For jffs2, a jhead is prepended which contains with magic and length.
;; The jhead is not part of the jffs2 partition however.
-#ifndef CONFIG_ETRAXFS_SIM
move.d __bss_start, $r0
-#else
- move.d __end, $r0
-#endif
move.d [$r0], $r1
cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic?
beq 2f ; yes, jump
#define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ))
#elif defined(CONFIG_ETRAX_KGDB_PORT1)
#define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ))
-#elif defined(CONFIG_ETRAX_KGB_PORT2)
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
#define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ))
#elif defined(CONFIG_ETRAX_KGDB_PORT3)
#define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ))
etrax_irv->v[i] = weird_irq;
np = of_find_compatible_node(NULL, NULL, "axis,crisv32-intc");
- domain = irq_domain_add_legacy(np, NR_IRQS - FIRST_IRQ,
+ domain = irq_domain_add_legacy(np, NBR_INTR_VECT - FIRST_IRQ,
FIRST_IRQ, FIRST_IRQ,
&crisv32_irq_ops, NULL);
BUG_ON(!domain);
irq_set_default_host(domain);
of_node_put(np);
- for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
+ for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT; i++, j++) {
set_exception_vector(i, interrupt[j]);
}
/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
void putDebugChar(int val);
-/* Returns the integer equivalent of a hexadecimal character. */
-static int hex(char ch);
-
/* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character
in buf (null). */
static char *mem2hex(char *buf, unsigned char *mem, int count);
-/* Convert the array, in hexadecimal representation, pointed to by buf into
- binary representation. Put the result in mem, and return a pointer to
- the character after the last byte written. */
-static unsigned char *hex2mem(unsigned char *mem, char *buf, int count);
-
/* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to
the character after the last byte written. */
/* Error and warning messages. */
enum error_type
{
- SUCCESS, E01, E02, E03, E04, E05, E06,
+ SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
};
static char *error_message[] =
"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
"E05 Change register content - P - the register is not implemented..",
"E06 Change memory content - M - internal error.",
+ "E07 Change register content - P - the register is not stored on the stack",
+ "E08 Invalid parameter"
};
/********************************** Breakpoint *******************************/
/********************************* Register image ****************************/
/* Write a value to a specified register in the register image of the current
- thread. Returns status code SUCCESS, E02 or E05. */
+ thread. Returns status code SUCCESS, E02, E05 or E08. */
static int
write_register(int regno, char *val)
{
if (regno >= R0 && regno <= ACR) {
/* Consecutive 32-bit registers. */
- hex2mem((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
} else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) {
/* Read-only registers. */
} else if (regno == PID) {
/* 32-bit register. (Even though we already checked SRS and WZ, we cannot
combine this with the EXS - SPC write since SRS and WZ have different size.) */
- hex2mem((unsigned char *)®.pid, val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)®.pid, val, sizeof(unsigned int)))
+ status = E08;
} else if (regno == SRS) {
/* 8-bit register. */
- hex2mem((unsigned char *)®.srs, val, sizeof(unsigned char));
+ if (hex2bin((unsigned char *)®.srs, val, sizeof(unsigned char)))
+ status = E08;
} else if (regno >= EXS && regno <= SPC) {
/* Consecutive 32-bit registers. */
- hex2mem((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
} else if (regno == PC) {
/* Pseudo-register. Treat as read-only. */
} else if (regno >= S0 && regno <= S15) {
/* 32-bit registers. */
- hex2mem((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
} else {
/* Non-existing register. */
status = E05;
}
/********************************** Packet I/O ******************************/
-/* Returns the integer equivalent of a hexadecimal character. */
-static int
-hex(char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return (ch - 'a' + 10);
- if ((ch >= '0') && (ch <= '9'))
- return (ch - '0');
- if ((ch >= 'A') && (ch <= 'F'))
- return (ch - 'A' + 10);
- return -1;
-}
-
/* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character
in buf (null). */
return buf;
}
-/* Convert the array, in hexadecimal representation, pointed to by buf into
- binary representation. Put the result in mem, and return a pointer to
- the character after the last byte written. */
-static unsigned char*
-hex2mem(unsigned char *mem, char *buf, int count)
-{
- int i;
- unsigned char ch;
- for (i = 0; i < count; i++) {
- ch = hex (*buf++) << 4;
- ch = ch + hex (*buf++);
- *mem++ = ch;
- }
- return mem;
-}
-
/* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to the character after
the last byte written.
buffer[count] = 0;
if (ch == '#') {
- xmitcsum = hex(getDebugChar()) << 4;
- xmitcsum += hex(getDebugChar());
+ xmitcsum = hex_to_bin(getDebugChar()) << 4;
+ xmitcsum += hex_to_bin(getDebugChar());
if (checksum != xmitcsum) {
/* Wrong checksum */
putDebugChar('-');
/* Write registers. GXX..XX
Each byte of register data is described by two hex digits.
Success: OK
- Failure: void. */
+ Failure: E08. */
/* General and special registers. */
- hex2mem((char *)®, &input_buffer[1], sizeof(registers));
+ if (hex2bin((char *)®, &input_buffer[1], sizeof(registers)))
+ gdb_cris_strcpy(output_buffer, error_message[E08]);
/* Support registers. */
- hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
+ else if (hex2bin((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
&input_buffer[1] + sizeof(registers),
- 16 * sizeof(unsigned int));
- gdb_cris_strcpy(output_buffer, "OK");
+ 16 * sizeof(unsigned int)))
+ gdb_cris_strcpy(output_buffer, error_message[E08]);
+ else
+ gdb_cris_strcpy(output_buffer, "OK");
break;
case 'P':
/* Do not support non-existing registers. */
gdb_cris_strcpy(output_buffer, error_message[E05]);
break;
+ case E08:
+ /* Invalid parameter. */
+ gdb_cris_strcpy(output_buffer, error_message[E08]);
+ break;
default:
/* Valid register number. */
gdb_cris_strcpy(output_buffer, "OK");
AA..AA is the start address, LLLL is the number of bytes, and
XX..XX is the hexadecimal data.
Success: OK
- Failure: void. */
+ Failure: E08. */
{
char *lenptr;
char *dataptr;
int len = gdb_cris_strtol(lenptr+1, &dataptr, 16);
if (*lenptr == ',' && *dataptr == ':') {
if (input_buffer[0] == 'M') {
- hex2mem(addr, dataptr + 1, len);
+ if (hex2bin(addr, dataptr + 1, len))
+ gdb_cris_strcpy(output_buffer, error_message[E08]);
+ else
+ gdb_cris_strcpy(output_buffer, "OK");
} else /* X */ {
bin2mem(addr, dataptr + 1, len);
+ gdb_cris_strcpy(output_buffer, "OK");
}
- gdb_cris_strcpy(output_buffer, "OK");
- }
- else {
+ } else {
gdb_cris_strcpy(output_buffer, error_message[E06]);
}
}
{I2C_BOARD_INFO("tmp100", 0x4E)},
#ifdef CONFIG_RTC_DRV_PCF8563
{I2C_BOARD_INFO("pcf8563", 0x51)},
-#endif
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- {I2C_BOARD_INFO("vgpio", 0x20)},
- {I2C_BOARD_INFO("vgpio", 0x21)},
#endif
{I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)},
{I2C_BOARD_INFO("tmp100", 0x4C)},
{I2C_BOARD_INFO("tmp100", 0x4D)},
{I2C_BOARD_INFO("tmp100", 0x4E)},
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- {I2C_BOARD_INFO("vgpio", 0x20)},
- {I2C_BOARD_INFO("vgpio", 0x21)},
-#endif
{I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)},
{I2C_BOARD_INFO("fnp300", 0x42)},
# Makefile for the linux kernel.
#
-obj-y := dma.o pinmux.o io.o arbiter.o
+obj-y := dma.o pinmux.o arbiter.o
clean:
+++ /dev/null
-/*
- * Helper functions for I/O pins.
- *
- * Copyright (c) 2005-2007 Axis Communications AB.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <mach/pinmux.h>
-#include <hwregs/gio_defs.h>
-
-struct crisv32_ioport crisv32_ioports[] = {
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
- 32
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
- 32
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
- 16
- },
-};
-
-#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
-
-struct crisv32_iopin crisv32_led_net0_green;
-struct crisv32_iopin crisv32_led_net0_red;
-struct crisv32_iopin crisv32_led2_green;
-struct crisv32_iopin crisv32_led2_red;
-struct crisv32_iopin crisv32_led3_green;
-struct crisv32_iopin crisv32_led3_red;
-
-/* Dummy port used when green LED and red LED is on the same bit */
-static unsigned long io_dummy;
-static struct crisv32_ioport dummy_port = {
- &io_dummy,
- &io_dummy,
- &io_dummy,
- 32
-};
-static struct crisv32_iopin dummy_led = {
- &dummy_port,
- 0
-};
-
-static int __init crisv32_io_init(void)
-{
- int ret = 0;
-
- u32 i;
-
- /* Locks *should* be dynamically initialized. */
- for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
- spin_lock_init(&crisv32_ioports[i].lock);
- spin_lock_init(&dummy_port.lock);
-
- /* Initialize LEDs */
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
- ret += crisv32_io_get_name(&crisv32_led_net0_green,
- CONFIG_ETRAX_LED_G_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
- ret += crisv32_io_get_name(&crisv32_led_net0_red,
- CONFIG_ETRAX_LED_R_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
- } else
- crisv32_led_net0_red = dummy_led;
-#endif
-
- ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
- ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
- ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
- ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
-
- crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
- return ret;
-}
-
-__initcall(crisv32_io_init);
-
-int crisv32_io_get(struct crisv32_iopin *iopin,
- unsigned int port, unsigned int pin)
-{
- if (port > NBR_OF_PORTS)
- return -EINVAL;
- if (port > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
- return -EIO;
-
- return 0;
-}
-
-int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
-{
- int port;
- int pin;
-
- if (toupper(*name) == 'P')
- name++;
-
- if (toupper(*name) < 'A' || toupper(*name) > 'E')
- return -EINVAL;
-
- port = toupper(*name) - 'A';
- name++;
- pin = simple_strtoul(name, NULL, 10);
-
- if (pin < 0 || pin > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
- return -EIO;
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-/* PCI I/O access stuff */
-struct cris_io_operations *cris_iops = NULL;
-EXPORT_SYMBOL(cris_iops);
-#endif
-
Configures the initial data for the general port E bits. Most
products should use 00000 here.
-config ETRAX_DEF_GIO_PV_OE
- hex "GIO_PV_OE"
- depends on ETRAX_VIRTUAL_GPIO
- default "0000"
- help
- Configures the direction of virtual general port V bits. 1 is out,
- 0 is in. This is often totally different depending on the product
- used. These bits are used for all kinds of stuff. If you don't know
- what to use, it is always safe to put all as inputs, although
- floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PV_OUT
- hex "GIO_PV_OUT"
- depends on ETRAX_VIRTUAL_GPIO
- default "0000"
- help
- Configures the initial data for the virtual general port V bits.
- Most products should use 0000 here.
-
endmenu
endif
# Makefile for the linux kernel.
#
-obj-y := dma.o pinmux.o io.o arbiter.o
+obj-y := dma.o pinmux.o arbiter.o
clean:
+++ /dev/null
-/*
- * Helper functions for I/O pins.
- *
- * Copyright (c) 2004-2007 Axis Communications AB.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <mach/pinmux.h>
-#include <hwregs/gio_defs.h>
-
-#ifndef DEBUG
-#define DEBUG(x)
-#endif
-
-struct crisv32_ioport crisv32_ioports[] = {
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
- 8
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din),
- 18
- }
-};
-
-#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
-
-struct crisv32_iopin crisv32_led_net0_green;
-struct crisv32_iopin crisv32_led_net0_red;
-struct crisv32_iopin crisv32_led_net1_green;
-struct crisv32_iopin crisv32_led_net1_red;
-struct crisv32_iopin crisv32_led2_green;
-struct crisv32_iopin crisv32_led2_red;
-struct crisv32_iopin crisv32_led3_green;
-struct crisv32_iopin crisv32_led3_red;
-
-/* Dummy port used when green LED and red LED is on the same bit */
-static unsigned long io_dummy;
-static struct crisv32_ioport dummy_port = {
- &io_dummy,
- &io_dummy,
- &io_dummy,
- 18
-};
-static struct crisv32_iopin dummy_led = {
- &dummy_port,
- 0
-};
-
-static int __init crisv32_io_init(void)
-{
- int ret = 0;
-
- u32 i;
-
- /* Locks *should* be dynamically initialized. */
- for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
- spin_lock_init(&crisv32_ioports[i].lock);
- spin_lock_init(&dummy_port.lock);
-
- /* Initialize LEDs */
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
- ret +=
- crisv32_io_get_name(&crisv32_led_net0_green,
- CONFIG_ETRAX_LED_G_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
- ret +=
- crisv32_io_get_name(&crisv32_led_net0_red,
- CONFIG_ETRAX_LED_R_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
- } else
- crisv32_led_net0_red = dummy_led;
-#endif
-
-#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO
- ret +=
- crisv32_io_get_name(&crisv32_led_net1_green,
- CONFIG_ETRAX_LED_G_NET1);
- crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) {
- crisv32_io_get_name(&crisv32_led_net1_red,
- CONFIG_ETRAX_LED_R_NET1);
- crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out);
- } else
- crisv32_led_net1_red = dummy_led;
-#endif
-
- ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
- ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
- ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
- ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
-
- crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
- return ret;
-}
-
-__initcall(crisv32_io_init);
-
-int crisv32_io_get(struct crisv32_iopin *iopin,
- unsigned int port, unsigned int pin)
-{
- if (port > NBR_OF_PORTS)
- return -EINVAL;
- if (port > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
- /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
- if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
- return -EIO;
- DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n",
- pin, port));
-
- return 0;
-}
-
-int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
-{
- int port;
- int pin;
-
- if (toupper(*name) == 'P')
- name++;
-
- if (toupper(*name) < 'A' || toupper(*name) > 'E')
- return -EINVAL;
-
- port = toupper(*name) - 'A';
- name++;
- pin = simple_strtoul(name, NULL, 10);
-
- if (pin < 0 || pin > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
- /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
- if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
- return -EIO;
-
- DEBUG(printk(KERN_DEBUG
- "crisv32_io_get_name: Allocated pin %d on port %d\n",
- pin, port));
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-/* PCI I/O access stuff */
-struct cris_io_operations *cris_iops = NULL;
-EXPORT_SYMBOL(cris_iops);
-#endif
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "axis,crisv32";
+ reg = <0>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ model = "artpec3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ intc: interrupt-controller {
+ compatible = "axis,crisv32-intc";
+ reg = <0xb002a000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gio: gpio@b0020000 {
+ compatible = "axis,artpec3-gio";
+ reg = <0xb0020000 0x1000>;
+ interrupts = <61>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
+
+ serial@b003e000 {
+ compatible = "axis,etraxfs-uart";
+ reg = <0xb003e000 0x1000>;
+ interrupts = <64>;
+ status = "disabled";
+ };
+ };
+};
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "etraxfs.dtsi"
/ {
status = "okay";
};
};
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gio 1 0 0xd>;
+ gpio-miso = <&gio 4 0 0xd>;
+ gpio-mosi = <&gio 0 0 0xd>;
+ cs-gpios = <&gio 3 0 0xd>;
+ num-chipselects = <1>;
+
+ temp-sensor@0 {
+ compatible = "ti,lm70";
+ reg = <0>;
+
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ network {
+ label = "network";
+ gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>;
+ };
+
+ status {
+ label = "status";
+ gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
};
#interrupt-cells = <1>;
};
+ gio: gpio@b001a000 {
+ compatible = "axis,etraxfs-gio";
+ reg = <0xb001a000 0x1000>;
+ interrupts = <50>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
+
serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
--- /dev/null
+../../../../../include/dt-bindings
\ No newline at end of file
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "artpec3.dtsi"
+
+/ {
+ model = "Axis P1343 Network Camera";
+ compatible = "axis,p1343";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ uart0: serial@b003e000 {
+ status = "okay";
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_green {
+ label = "status:green";
+ gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ status_red {
+ label = "status:red";
+ gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
+ };
+
+ network_green {
+ label = "network:green";
+ gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
+ };
+
+ network_red {
+ label = "network:red";
+ gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
+ };
+
+ power_red {
+ label = "power:red";
+ gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ activity-button@0 {
+ label = "Activity Button";
+ linux,code = <KEY_FN>;
+ gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
+ };
+ };
+};
#ifdef CONFIG_ETRAX_PB_LEDS
move.b $r2, [R_PORT_PB_DATA]
#endif
-#ifdef CONFIG_ETRAX_90000000_LEDS
- move.b $r2, [0x90000000]
-#endif
#endif
;; check if we got something on the serial port
+++ /dev/null
-#ifndef _ASM_ARCH_CRIS_IO_H
-#define _ASM_ARCH_CRIS_IO_H
-
-#include <linux/spinlock.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-
-enum crisv32_io_dir
-{
- crisv32_io_dir_in = 0,
- crisv32_io_dir_out = 1
-};
-
-struct crisv32_ioport
-{
- volatile unsigned long *oe;
- volatile unsigned long *data;
- volatile unsigned long *data_in;
- unsigned int pin_count;
- spinlock_t lock;
-};
-
-struct crisv32_iopin
-{
- struct crisv32_ioport* port;
- int bit;
-};
-
-extern struct crisv32_ioport crisv32_ioports[];
-
-extern struct crisv32_iopin crisv32_led1_green;
-extern struct crisv32_iopin crisv32_led1_red;
-extern struct crisv32_iopin crisv32_led2_green;
-extern struct crisv32_iopin crisv32_led2_red;
-extern struct crisv32_iopin crisv32_led3_green;
-extern struct crisv32_iopin crisv32_led3_red;
-
-extern struct crisv32_iopin crisv32_led_net0_green;
-extern struct crisv32_iopin crisv32_led_net0_red;
-extern struct crisv32_iopin crisv32_led_net1_green;
-extern struct crisv32_iopin crisv32_led_net1_red;
-
-static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
-{
- unsigned long flags;
- spin_lock_irqsave(&iopin->port->lock, flags);
-
- if (iopin->port->data) {
- if (val)
- *iopin->port->data |= iopin->bit;
- else
- *iopin->port->data &= ~iopin->bit;
- }
-
- spin_unlock_irqrestore(&iopin->port->lock, flags);
-}
-
-static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
- enum crisv32_io_dir dir)
-{
- unsigned long flags;
- spin_lock_irqsave(&iopin->port->lock, flags);
-
- if (iopin->port->oe) {
- if (dir == crisv32_io_dir_in)
- *iopin->port->oe &= ~iopin->bit;
- else
- *iopin->port->oe |= iopin->bit;
- }
-
- spin_unlock_irqrestore(&iopin->port->lock, flags);
-}
-
-static inline int crisv32_io_rd(struct crisv32_iopin* iopin)
-{
- return ((*iopin->port->data_in & iopin->bit) ? 1 : 0);
-}
-
-int crisv32_io_get(struct crisv32_iopin* iopin,
- unsigned int port, unsigned int pin);
-int crisv32_io_get_name(struct crisv32_iopin* iopin,
- const char *name);
-
-#define CRIS_LED_OFF 0x00
-#define CRIS_LED_GREEN 0x01
-#define CRIS_LED_RED 0x02
-#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED)
-
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
-#define CRIS_LED_NETWORK_GRP0_SET(x) \
- do { \
- CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-#else
-#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {}
-#endif
-
-#define CRIS_LED_NETWORK_GRP0_SET_G(x) \
- crisv32_io_set(&crisv32_led_net0_green, !(x));
-
-#define CRIS_LED_NETWORK_GRP0_SET_R(x) \
- crisv32_io_set(&crisv32_led_net0_red, !(x));
-
-#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)
-#define CRIS_LED_NETWORK_GRP1_SET(x) \
- do { \
- CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-#else
-#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {}
-#endif
-
-#define CRIS_LED_NETWORK_GRP1_SET_G(x) \
- crisv32_io_set(&crisv32_led_net1_green, !(x));
-
-#define CRIS_LED_NETWORK_GRP1_SET_R(x) \
- crisv32_io_set(&crisv32_led_net1_red, !(x));
-
-#define CRIS_LED_ACTIVE_SET(x) \
- do { \
- CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-
-#define CRIS_LED_ACTIVE_SET_G(x) \
- crisv32_io_set(&crisv32_led2_green, !(x));
-#define CRIS_LED_ACTIVE_SET_R(x) \
- crisv32_io_set(&crisv32_led2_red, !(x));
-#define CRIS_LED_DISK_WRITE(x) \
- do{\
- crisv32_io_set(&crisv32_led3_green, !(x)); \
- crisv32_io_set(&crisv32_led3_red, !(x)); \
- }while(0)
-#define CRIS_LED_DISK_READ(x) \
- crisv32_io_set(&crisv32_led3_green, !(x));
-
-#endif
#include <hwregs/intr_vect.h>
/* Number of non-cpu interrupts. */
-#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */
+#define NR_IRQS (NBR_INTR_VECT + 256) /* Exceptions + IRQs */
#define FIRST_IRQ 0x31 /* Exception number for first IRQ */
#define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */
#if NR_REAL_IRQS > 32
assumed that we want to share code when debugging (exposes more
trouble). */
#ifndef SHARE_LIB_CORE
-# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \
- && !defined(CONFIG_SHARE_SHLIB_CORE)
+# if (defined(__KERNEL__) || !defined(RELOC_DEBUG))
# define SHARE_LIB_CORE 0
# else
# define SHARE_LIB_CORE 1
#define _ASM_CRIS_IO_H
#include <asm/page.h> /* for __va, __pa */
+#ifdef CONFIG_ETRAX_ARCH_V10
#include <arch/io.h>
+#endif
#include <asm-generic/iomap.h>
#include <linux/kernel.h>
* g1-g7 and g25-g31 is both input and outputs but on different pins
* Also note that some bits change pins depending on what interfaces
* are enabled.
- *
- * For ETRAX FS (CONFIG_ETRAXFS):
- * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction
- * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction
- * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction
- * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction
- * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction
- * /dev/leds minor 2, Access to leds depending on kernelconfig
- *
- * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
- * /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction
- * /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction
- * /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction
- * /dev/gpiod minor 4, 32 bit GPIO, input only
- * /dev/leds minor 2, Access to leds depending on kernelconfig
- * /dev/pwm0 minor 16, PWM channel 0 on PA30
- * /dev/pwm1 minor 17, PWM channel 1 on PA31
- * /dev/pwm2 minor 18, PWM channel 2 on PB26
- * /dev/ppwm minor 19, PPWM channel
- *
*/
#ifndef _ASM_ETRAXGPIO_H
#define _ASM_ETRAXGPIO_H
#define ETRAXGPIO_IOCTYPE 43
/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
-#ifdef CONFIG_ETRAX_ARCH_V10
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_G 3
#define GPIO_MINOR_LAST 3
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
-#endif
-
-#ifdef CONFIG_ETRAXFS
-#define GPIO_MINOR_A 0
-#define GPIO_MINOR_B 1
-#define GPIO_MINOR_LEDS 2
-#define GPIO_MINOR_C 3
-#define GPIO_MINOR_D 4
-#define GPIO_MINOR_E 5
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#define GPIO_MINOR_V 6
-#define GPIO_MINOR_LAST 6
-#else
-#define GPIO_MINOR_LAST 5
-#endif
-#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
-#endif
-
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#define GPIO_MINOR_A 0
-#define GPIO_MINOR_B 1
-#define GPIO_MINOR_LEDS 2
-#define GPIO_MINOR_C 3
-#define GPIO_MINOR_D 4
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#define GPIO_MINOR_V 6
-#define GPIO_MINOR_LAST 6
-#else
-#define GPIO_MINOR_LAST 4
-#endif
-#define GPIO_MINOR_FIRST_PWM 16
-#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
-#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
-#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
-#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
-#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
-#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
-#endif
-
/* supported ioctl _IOC_NR's */
#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
/* *arg updated with current output pins. */
-/* The following ioctl's are applicable to the PWM channels only */
-
-#define IO_PWM_SET_MODE 0x20
-
-enum io_pwm_mode {
- PWM_OFF = 0, /* disabled, deallocated */
- PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */
- PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */
- PWM_VARFREQ = 3, /* individually configurable high/low periods */
- PWM_SOFT = 4 /* software generated */
-};
-
-struct io_pwm_set_mode {
- enum io_pwm_mode mode;
-};
-
-/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns
- * from 10ns (value = 0) to 81920ns (value = 8191)
- * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to
- * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty
- * cycle (81920 + 10ns or 10ns + 81920ns, respectively).)
- */
-#define IO_PWM_SET_PERIOD 0x21
-
-struct io_pwm_set_period {
- unsigned int lo; /* 0..8191 */
- unsigned int hi; /* 0..8191 */
-};
-
-/* Only for modes PWM_STANDARD and PWM_FAST.
- * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from
- * 0 (value = 0) to 255/256 (value = 255).
- * For PWM_FAST, set duty cycle of PWM output signal from
- * 0% (value = 0) to 100% (value = 255). Output signal in this mode
- * is a 10ns pulse surrounded by a high or low level depending on duty
- * cycle (except for 0% and 100% which result in a constant output).
- * Resulting output frequency varies from 50 MHz at 50% duty cycle,
- * down to 390 kHz at min/max duty cycle.
- */
-#define IO_PWM_SET_DUTY 0x22
-
-struct io_pwm_set_duty {
- int duty; /* 0..255 */
-};
-
-/* Returns information about the latest PWM pulse.
- * lo: Length of the latest low period, in units of 10ns.
- * hi: Length of the latest high period, in units of 10ns.
- * cnt: Time since last detected edge, in units of 10ns.
- *
- * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
- *
- * NOTE: All PWM devices is connected to the same input source.
- */
-#define IO_PWM_GET_PERIOD 0x23
-
-struct io_pwm_get_period {
- unsigned int lo;
- unsigned int hi;
- unsigned int cnt;
-};
-
-/* Sets the input source for the PWM input. For the src value see the
- * register description for gio:rw_pwm_in_cfg.
- *
- * NOTE: All PWM devices is connected to the same input source.
- */
-#define IO_PWM_SET_INPUT_SRC 0x24
-struct io_pwm_set_input_src {
- unsigned int src; /* 0..7 */
-};
-
-/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
-#define IO_PPWM_SET_DUTY 0x25
-
-struct io_ppwm_set_duty {
- int duty; /* 0..255 */
-};
-
-/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
- * PWM capable gpio pins:
- */
-#define IO_PWMCLK_SETGET_CONFIG 0x26
-struct gpio_pwmclk_conf {
- unsigned int gpiopin; /* The pin number based on the opened device */
- unsigned int baseclk; /* The base clock to use, or sw will select one close*/
- unsigned int low; /* The number of low periods of the baseclk */
- unsigned int high; /* The number of high periods of the baseclk */
-};
-
-/* Examples:
- * To get a symmetric 12 MHz clock without knowing anything about the hardware:
- * baseclk = 12000000, low = 0, high = 0
- * To just get info of current setting:
- * baseclk = 0, low = 0, high = 0, the values will be updated by driver.
- */
-
#endif
#include <asm/pgtable.h>
#include <asm/fasttimer.h>
-extern unsigned long get_cmos_time(void);
extern void __Udiv(void);
extern void __Umod(void);
extern void __Div(void);
extern void iounmap(volatile void * __iomem);
/* Platform dependent support */
-EXPORT_SYMBOL(get_cmos_time);
EXPORT_SYMBOL(loops_per_usec);
/* Math functions */
extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec;
-int set_rtc_mmss(unsigned long nowtime)
-{
- D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
- return 0;
-}
-
-/* grab the time from the RTC chip */
-unsigned long get_cmos_time(void)
-{
- return 0;
-}
-
-
-int update_persistent_clock(struct timespec now)
-{
- return set_rtc_mmss(now.tv_sec);
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
- ts->tv_sec = 0;
- ts->tv_nsec = 0;
-}
-
-
extern void cris_profile_sample(struct pt_regs* regs);
void
KBUILD_AFLAGS += $(aflags-y)
LDFLAGS += $(ldflags-y)
+ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := h8300-unknown-linux-
+endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
# in order to suppress error message.
#
CONFIG_MEMORY_START ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00280000
IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup -T $(obj)/vmlinux.lds \
+ --defsym output=$(CONFIG_MEMORY_START)
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
$(call if_changed,ld)
.section .text..startup,"ax"
.global startup
startup:
+ mov.l #startup, sp
mov.l er0, er4
- mov.l er0, sp
mov.l #__sbss, er0
mov.l #__ebss, er1
sub.l er0, er1
bne 1b
jsr @decompress_kernel
mov.l er4, er0
- jmp @0x400000
+ jmp @output
.align 9
fake_headers_as_bzImage:
extern char input_data[];
extern int input_len;
-static unsigned char *output;
+extern char output[];
#define HEAP_SIZE 0x10000
static void error(char *x)
{
-
while (1)
; /* Halt */
}
-#define STACK_SIZE (4096)
-long user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
void decompress_kernel(void)
{
free_mem_ptr = (unsigned long)&_end;
*(.bss*)
. = ALIGN(0x4) ;
__ebss = . ;
- __end = . ;
}
+ _end = . ;
}
chosen {
bootargs = "console=ttySC2,38400";
- stdout-path = <&sci2>;
+ stdout-path = &sci2;
};
aliases {
serial0 = &sci0;
compatible = "renesas,h8s2678-pll-clock";
clocks = <&xclk>;
#clock-cells = <0>;
- reg = <0xfee03b 2>, <0xfee045 2>;
+ reg = <0xffff3b 1>, <0xffff45 1>;
};
core_clk: core_clk {
compatible = "renesas,h8300-div-clock";
clocks = <&pllclk>;
#clock-cells = <0>;
- reg = <0xfee03b 2>;
+ reg = <0xffff3b 1>;
renesas,width = <3>;
};
fclk: fclk {
*(volatile unsigned long *)addr = b;
}
-static inline void ctrl_bclr(int b, unsigned long addr)
+static inline void ctrl_bclr(int b, unsigned char *addr)
{
if (__builtin_constant_p(b))
- __asm__("bclr %1,%0" : : "WU"(addr), "i"(b));
+ __asm__("bclr %1,%0" : "+WU"(*addr): "i"(b));
else
- __asm__("bclr %w1,%0" : : "WU"(addr), "r"(b));
+ __asm__("bclr %w1,%0" : "+WU"(*addr): "r"(b));
}
-static inline void ctrl_bset(int b, unsigned long addr)
+static inline void ctrl_bset(int b, unsigned char *addr)
{
if (__builtin_constant_p(b))
- __asm__("bset %1,%0" : : "WU"(addr), "i"(b));
+ __asm__("bset %1,%0" : "+WU"(*addr): "i"(b));
else
- __asm__("bset %w1,%0" : : "WU"(addr), "r"(b));
+ __asm__("bset %w1,%0" : "+WU"(*addr): "r"(b));
}
#endif /* __KERNEL__ */
#ifdef __KERNEL__
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE 8192 /* 2 pages */
+
#ifndef __ASSEMBLY__
/*
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER 1
-#define THREAD_SIZE 8192 /* 2 pages */
-
-
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#define ROMTOP 0x000000
#define RAMTOP 0x400000
. = RAMTOP;
_ramstart = .;
#define ADDR(x) ROMEND
-#else
#endif
_sdata = . ;
__data_start = . ;
- RW_DATA_SECTION(0,0,0)
+ RW_DATA_SECTION(0, PAGE_SIZE, THREAD_SIZE)
#if defined(CONFIG_ROMKERNEL)
#undef ADDR
#endif
-#define NR_syscalls 321 /* length of syscall table */
+#define NR_syscalls 322 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_execveat 1342
#define __NR_userfaultfd 1343
#define __NR_membarrier 1344
+#define __NR_kcmp 1345
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_execveat
data8 sys_userfaultfd
data8 sys_membarrier
+ data8 sys_kcmp // 1345
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
display_system_type(idprom->id_machtype);
- printk("Ethernet address: %x:%x:%x:%x:%x:%x\n",
- idprom->id_ethaddr[0], idprom->id_ethaddr[1],
- idprom->id_ethaddr[2], idprom->id_ethaddr[3],
- idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
+ printk("Ethernet address: %pM\n", idprom->id_ethaddr);
}
extern void irq_ctx_exit(int cpu);
# define __ARCH_HAS_DO_SOFTIRQ
#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
+static inline void irq_ctx_init(int cpu)
+{
+}
+static inline void irq_ctx_exit(int cpu)
+{
+}
#endif
void tbi_startup_interrupt(int);
{
local_irq_disable();
idle_task_exit();
+ irq_ctx_exit(smp_processor_id());
(void)cpu_report_death();
panic("No TBI found!");
per_cpu_trap_init(cpu);
+ irq_ctx_init(cpu);
preempt_disable();
obj-y += kernel/
obj-y += mm/
obj-y += net/
+obj-y += vdso/
ifdef CONFIG_KVM
obj-y += kvm/
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+ select ARCH_USE_BUILTIN_BSWAP
select HAVE_CONTEXT_TRACKING
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select SYSCTL_EXCEPTION_TRACE
select HAVE_VIRT_CPU_ACCOUNTING_GEN
select HAVE_IRQ_TIME_ACCOUNTING
+ select GENERIC_TIME_VSYSCALL
+ select ARCH_CLOCKSOURCE_DATA
menu "Machine selection"
select MIPS_L1_CACHE_SHIFT_6
select PCI_GT64XXX_PCI0
select MIPS_MSC
+ select SMP_UP if SMP
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_ZBOOT
select USE_OF
select ZONE_DMA32 if 64BIT
+ select BUILTIN_DTB
+ select LIBFDT
help
This enables support for the MIPS Technologies Malta evaluation
board.
config CSRC_SB1250
bool
+config MIPS_CLOCK_VSYSCALL
+ def_bool CSRC_R4K || CLKSRC_MIPS_GIC
+
config GPIO_TXX9
select ARCH_REQUIRE_GPIOLIB
bool
help
Allows the configuration of the timer frequency.
+ config HZ_24
+ bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
+
config HZ_48
bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
endchoice
+config SYS_SUPPORTS_24HZ
+ bool
+
config SYS_SUPPORTS_48HZ
bool
config SYS_SUPPORTS_ARBIT_HZ
bool
- default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
- !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
- !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+ default y if !SYS_SUPPORTS_24HZ && \
+ !SYS_SUPPORTS_48HZ && \
+ !SYS_SUPPORTS_100HZ && \
+ !SYS_SUPPORTS_128HZ && \
+ !SYS_SUPPORTS_250HZ && \
+ !SYS_SUPPORTS_256HZ && \
+ !SYS_SUPPORTS_1000HZ && \
!SYS_SUPPORTS_1024HZ
config HZ
int
+ default 24 if HZ_24
default 48 if HZ_48
default 100 if HZ_100
default 128 if HZ_128
bool
default y
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ default y
+
config PGTABLE_LEVELS
int
default 3 if 64BIT && !PAGE_SIZE_64KB
help
Add several files to the debugfs to test spinlock speed.
+if CPU_MIPSR6
+
+choice
+ prompt "Compact branch policy"
+ default MIPS_COMPACT_BRANCHES_OPTIMAL
+
+config MIPS_COMPACT_BRANCHES_NEVER
+ bool "Never (force delay slot branches)"
+ help
+ Pass the -mcompact-branches=never flag to the compiler in order to
+ force it to always emit branches with delay slots, and make no use
+ of the compact branch instructions introduced by MIPSr6. This is
+ useful if you suspect there may be an issue with compact branches in
+ either the compiler or the CPU.
+
+config MIPS_COMPACT_BRANCHES_OPTIMAL
+ bool "Optimal (use where beneficial)"
+ help
+ Pass the -mcompact-branches=optimal flag to the compiler in order for
+ it to make use of compact branch instructions where it deems them
+ beneficial, and use branches with delay slots elsewhere. This is the
+ default compiler behaviour, and should be used unless you have a
+ reason to choose otherwise.
+
+config MIPS_COMPACT_BRANCHES_ALWAYS
+ bool "Always (force compact branches)"
+ help
+ Pass the -mcompact-branches=always flag to the compiler in order to
+ force it to always emit compact branches, making no use of branch
+ instructions with delay slots. This can result in more compact code
+ which may be beneficial in some scenarios.
+
+endchoice
+
+endif # CPU_MIPSR6
+
+config SCACHE_DEBUGFS
+ bool "L2 cache debugfs entries"
+ depends on DEBUG_FS
+ help
+ Enable this to allow parts of the L2 cache configuration, such as
+ whether or not prefetching is enabled, to be exposed to userland
+ via debugfs.
+
+ If unsure, say N.
+
+menuconfig MIPS_CPS_NS16550
+ bool "CPS SMP NS16550 UART output"
+ depends on MIPS_CPS
+ help
+ Output debug information via an ns16550 compatible UART if exceptions
+ occur early in the boot process of a secondary core.
+
+if MIPS_CPS_NS16550
+
+config MIPS_CPS_NS16550_BASE
+ hex "UART Base Address"
+ default 0x1b0003f8 if MIPS_MALTA
+ help
+ The base address of the ns16550 compatible UART on which to output
+ debug information from the early stages of core startup.
+
+config MIPS_CPS_NS16550_SHIFT
+ int "UART Register Shift"
+ default 0 if MIPS_MALTA
+ help
+ The number of bits to shift ns16550 register indices by in order to
+ form their addresses. That is, log base 2 of the span between
+ adjacent ns16550 registers in the system.
+
+endif # MIPS_CPS_NS16550
+
endmenu
cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
endif
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER) += -mcompact-branches=never
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL) += -mcompact-branches=optimal
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_ALWAYS) += -mcompact-branches=always
+
#
# Firmware support
#
struct ssb_init_invariants *iv)
{
char buf[20];
+ int len, err;
/* Fill boardinfo structure */
memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo));
- bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
+ len = bcm47xx_nvram_getenv("boardvendor", buf, sizeof(buf));
+ if (len > 0) {
+ err = kstrtou16(strim(buf), 0, &iv->boardinfo.vendor);
+ if (err)
+ pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n",
+ buf);
+ }
+ if (!iv->boardinfo.vendor)
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+
+ len = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
+ if (len > 0) {
+ err = kstrtou16(strim(buf), 0, &iv->boardinfo.type);
+ if (err)
+ pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n",
+ buf);
+ }
memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom(&iv->sprom, NULL, false);
}
#define NVRAM_READ_VAL(type) \
-static void nvram_read_ ## type (const char *prefix, \
- const char *postfix, const char *name, \
- type *val, type allset, bool fallback) \
+static void nvram_read_ ## type(const char *prefix, \
+ const char *postfix, const char *name, \
+ type *val, type allset, bool fallback) \
{ \
char buf[100]; \
int err; \
int i;
for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
- struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+ struct ssb_sprom_core_pwr_info *pwr_info;
+
+ pwr_info = &sprom->core_pwr_info[i];
+
snprintf(postfix, sizeof(postfix), "%i", i);
nvram_read_u8(prefix, postfix, "maxp2ga",
&pwr_info->maxpwr_2g, 0, fallback);
int i;
for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
- struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+ struct ssb_sprom_core_pwr_info *pwr_info;
+
+ pwr_info = &sprom->core_pwr_info[i];
+
snprintf(postfix, sizeof(postfix), "%i", i);
nvram_read_u16(prefix, postfix, "pa2gw3a",
&pwr_info->pa_2g[3], 0, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
/* The address prefix 00:90:4C is used by Broadcom in their initial
- configuration. When a mac address with the prefix 00:90:4C is used
- all devices from the same series are sharing the same mac address.
- To prevent mac address collisions we replace them with a mac address
- based on the base address. */
+ * configuration. When a mac address with the prefix 00:90:4C is used
+ * all devices from the same series are sharing the same mac address.
+ * To prevent mac address collisions we replace them with a mac address
+ * based on the base address.
+ */
if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
u8 mac[6];
bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
}
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
- const char *prefix)
-{
- nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0,
- true);
- if (!boardinfo->vendor)
- boardinfo->vendor = SSB_BOARDVENDOR_BCM;
-
- nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
-}
-#endif
-
#if defined(CONFIG_BCM47XX_SSB)
static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
- if (bus->bustype == SSB_BUSTYPE_PCI) {
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ bcm47xx_fill_sprom(out, NULL, false);
+ return 0;
+ case SSB_BUSTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
bcm47xx_fill_sprom(out, prefix, false);
return 0;
- } else {
+ default:
pr_warn("Unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
/dts-v1/;
+/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */
+/memreserve/ 0x00001000 0x000ef000; /* YAMON */
+/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */
+
/ {
#address-cells = <1>;
#size-cells = <1>;
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_ATA=y
CONFIG_SATA_SIL24=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_IT8213=m
CONFIG_PATA_SIL680=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_IP_SCTP=m
CONFIG_FW_LOADER=m
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=m
CONFIG_MARVELL_PHY=m
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/hda3"
+CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BLK_DEV_RAM=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_VIA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_MACVLAN=m
CONFIG_VETH=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_AMD=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_BLK_DEV_RAM=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
CONFIG_RAID_ATTRS=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_ATA=y
CONFIG_ATA_PIIX=y
+CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_ATA_OVER_ETH=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_VIRTIO_BLK=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_NETWORK_SECMARK=y
CONFIG_CONNECTOR=m
CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#include <asm/signal.h>
#include <asm/siginfo.h>
+#include <asm/vdso.h>
struct mips_abi {
int (* const setup_frame)(void *sig_return, struct ksignal *ksig,
struct pt_regs *regs, sigset_t *set);
- const unsigned long signal_return_offset;
int (* const setup_rt_frame)(void *sig_return, struct ksignal *ksig,
struct pt_regs *regs, sigset_t *set);
- const unsigned long rt_signal_return_offset;
const unsigned long restart;
unsigned off_sc_fpregs;
unsigned off_sc_fpc_csr;
unsigned off_sc_used_math;
+
+ struct mips_vdso_image *vdso;
};
#endif /* _ASM_ABI_H */
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
*/
static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
{
#ifndef _ASM_BCACHE_H
#define _ASM_BCACHE_H
+#include <linux/types.h>
/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
chipset implemented caches. On machines with other CPUs the CPU does the
void (*bc_disable)(void);
void (*bc_wback_inv)(unsigned long page, unsigned long size);
void (*bc_inv)(unsigned long page, unsigned long size);
+ void (*bc_prefetch_enable)(void);
+ void (*bc_prefetch_disable)(void);
+ bool (*bc_prefetch_is_enabled)(void);
};
extern void indy_sc_init(void);
bcops->bc_inv(page, size);
}
+static inline void bc_prefetch_enable(void)
+{
+ if (bcops->bc_prefetch_enable)
+ bcops->bc_prefetch_enable();
+}
+
+static inline void bc_prefetch_disable(void)
+{
+ if (bcops->bc_prefetch_disable)
+ bcops->bc_prefetch_disable();
+}
+
+static inline bool bc_prefetch_is_enabled(void)
+{
+ if (bcops->bc_prefetch_is_enabled)
+ return bcops->bc_prefetch_is_enabled();
+
+ return false;
+}
+
#else /* !defined(CONFIG_BOARD_SCACHE) */
/* Not R4000 / R4400 / R4600 / R5000. */
#define bc_disable() do { } while (0)
#define bc_wback_inv(page, size) do { } while (0)
#define bc_inv(page, size) do { } while (0)
+#define bc_prefetch_enable() do { } while (0)
+#define bc_prefetch_disable() do { } while (0)
+#define bc_prefetch_is_enabled() 0
#endif /* !defined(CONFIG_BOARD_SCACHE) */
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_CLOCKSOURCE_H
+#define __ASM_CLOCKSOURCE_H
+
+#include <linux/types.h>
+
+/* VDSO clocksources. */
+#define VDSO_CLOCK_NONE 0 /* No suitable clocksource. */
+#define VDSO_CLOCK_R4K 1 /* Use the coprocessor 0 count. */
+#define VDSO_CLOCK_GIC 2 /* Use the GIC. */
+
+/**
+ * struct arch_clocksource_data - Architecture-specific clocksource information.
+ * @vdso_clock_mode: Method the VDSO should use to access the clocksource.
+ */
+struct arch_clocksource_data {
+ u8 vdso_clock_mode;
+};
+
+#endif /* __ASM_CLOCKSOURCE_H */
#endif
#ifndef cpu_has_rixi
-# ifdef CONFIG_64BIT
-# define cpu_has_rixi (cpu_data[0].options & MIPS_CPU_RIXI)
-# else /* CONFIG_32BIT */
-# define cpu_has_rixi ((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits)
-# endif
+#define cpu_has_rixi (cpu_data[0].options & MIPS_CPU_RIXI)
#endif
#ifndef cpu_has_mmips
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_DEBUG_H__
+#define __MIPS_ASM_DEBUG_H__
+
+#include <linux/dcache.h>
+
+/*
+ * mips_debugfs_dir corresponds to the "mips" directory at the top level
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * placed beneath this directory.
+ */
+extern struct dentry *mips_debugfs_dir;
+
+#endif /* __MIPS_ASM_DEBUG_H__ */
#ifndef _ASM_ELF_H
#define _ASM_ELF_H
+#include <linux/auxvec.h>
#include <linux/fs.h>
#include <uapi/linux/elf.h>
#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
#endif
+#define ARCH_DLINFO \
+do { \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, \
+ (unsigned long)current->mm->context.vdso); \
+} while (0)
+
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
struct linux_binprm;
extern int arch_setup_additional_pages(struct linux_binprm *bprm,
#include <asm/bootinfo.h> /* For cleaner code... */
-enum fw_memtypes {
- fw_dontuse,
- fw_code,
- fw_free,
-};
-
-typedef struct {
- unsigned long base; /* Within KSEG0 */
- unsigned int size; /* bytes */
- enum fw_memtypes type; /* fw_memtypes */
-} fw_memblock_t;
-
-/* Maximum number of memory block descriptors. */
-#define FW_MAX_MEMBLOCKS 32
-
extern int fw_argc;
extern int *_fw_argv;
extern int *_fw_envp;
extern void fw_init_cmdline(void);
extern char *fw_getcmdline(void);
-extern fw_memblock_t *fw_getmdesc(int);
extern void fw_meminit(void);
extern char *fw_getenv(char *name);
extern unsigned long fw_getenvl(char *name);
*/
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+#define ioremap_uc ioremap_nocache
/*
* ioremap_cachable - map bus memory into CPU space
void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
bool fallback);
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
- const char *prefix);
-#endif
-
void bcm47xx_set_system_type(u16 chip_id);
#endif /* __ASM_BCM47XX_H */
#define SOC_ID_VRX268_2 0x00C /* v1.2 */
#define SOC_ID_GRX288_2 0x00D /* v1.2 */
#define SOC_ID_GRX282_2 0x00E /* v1.2 */
+#define SOC_ID_VRX220 0x000
+
+#define SOC_ID_ARX362 0x004
+#define SOC_ID_ARX368 0x005
+#define SOC_ID_ARX382 0x007
+#define SOC_ID_ARX388 0x008
+#define SOC_ID_URX388 0x009
+#define SOC_ID_GRX383 0x010
+#define SOC_ID_GRX369 0x011
+#define SOC_ID_GRX387 0x00F
+#define SOC_ID_GRX389 0x012
/* SoC Types */
#define SOC_TYPE_DANUBE 0x01
#define SOC_TYPE_VR9 0x04 /* v1.1 */
#define SOC_TYPE_VR9_2 0x05 /* v1.2 */
#define SOC_TYPE_AMAZON_SE 0x06
+#define SOC_TYPE_AR10 0x07
+#define SOC_TYPE_GRX390 0x08
+#define SOC_TYPE_VRX220 0x09
/* BOOT_SEL - find what boot media we have */
#define BS_EXT_ROM 0x0
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_MALTA_DTSHIM_H__
+#define __MIPS_MALTA_DTSHIM_H__
+
+#include <linux/init.h>
+
+#ifdef CONFIG_MIPS_MALTA
+
+extern void __init *malta_dt_shim(void *fdt);
+
+#else /* !CONFIG_MIPS_MALTA */
+
+static inline void *malta_dt_shim(void *fdt)
+{
+ return fdt;
+}
+
+#endif /* !CONFIG_MIPS_MALTA */
+
+#endif /* __MIPS_MALTA_DTSHIM_H__ */
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
+#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/types.h>
/*
* mips_cm_is64 - determine CM register width
*
- * The CM register width is processor and CM specific. A 64-bit processor
- * usually has a 64-bit CM and a 32-bit one has a 32-bit CM but a 64-bit
- * processor could come with a 32-bit CM. Moreover, accesses on 64-bit CMs
- * can be done either using regular 64-bit load/store instructions, or 32-bit
- * load/store instruction on 32-bit register pairs. We opt for using 64-bit
- * accesses on 64-bit CMs and kernels and 32-bit in any other case.
+ * The CM register width is determined by the version of the CM, with CM3
+ * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs.
+ * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs,
+ * or vice-versa. This variable indicates the width of the memory accesses
+ * that the kernel will perform to GCRs, which may differ from the actual
+ * width of the GCRs.
*
* It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
*/
\
static inline u64 read64_gcr_##name(void) \
{ \
- return __raw_readq(addr_gcr_##name()); \
+ void __iomem *addr = addr_gcr_##name(); \
+ u64 ret; \
+ \
+ if (mips_cm_is64) { \
+ ret = __raw_readq(addr); \
+ } else { \
+ ret = __raw_readl(addr); \
+ ret |= (u64)__raw_readl(addr + 0x4) << 32; \
+ } \
+ \
+ return ret; \
} \
\
static inline unsigned long read_gcr_##name(void) \
BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0)
BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130)
BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150)
+BUILD_CM_RW(l2_pft_control, MIPS_CM_GCB_OFS + 0x300)
+BUILD_CM_RW(l2_pft_control_b, MIPS_CM_GCB_OFS + 0x308)
/* Core Local & Core Other register accessor functions */
BUILD_CM_Cx_RW(reset_release, 0x00)
((minor) << CM_GCR_REV_MINOR_SHF))
#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
+#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
#define CM_REV_CM3 CM_ENCODE_REV(8, 0)
/* GCR_ERROR_CAUSE register fields */
#define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF 27
#define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK (_ULCAST_(0x1f) << 27)
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF 58
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK GENMASK_ULL(63, 58)
#define CM_GCR_ERROR_CAUSE_ERRINFO_SHF 0
#define CM_GCR_ERROR_CAUSE_ERRINGO_MSK (_ULCAST_(0x7ffffff) << 0)
#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
+/* GCR_L2_PFT_CONTROL register fields */
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF 12
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK (_ULCAST_(0xfffff) << 12)
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF 8
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK (_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF 0
+#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK (_ULCAST_(0xff) << 0)
+
+/* GCR_L2_PFT_CONTROL_B register fields */
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF 8
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK (_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF 0
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK (_ULCAST_(0xff) << 0)
+
/* GCR_Cx_COHERENCE register fields */
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
#define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10
#define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK (_ULCAST_(0x3) << 10)
#define CM_GCR_Cx_CONFIG_PVPE_SHF 0
-#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x1ff) << 0)
+#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x3ff) << 0)
/* GCR_Cx_OTHER register fields */
#define CM_GCR_Cx_OTHER_CORENUM_SHF 16
#define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16)
+#define CM3_GCR_Cx_OTHER_CORE_SHF 8
+#define CM3_GCR_Cx_OTHER_CORE_MSK (_ULCAST_(0x3f) << 8)
+#define CM3_GCR_Cx_OTHER_VP_SHF 0
+#define CM3_GCR_Cx_OTHER_VP_MSK (_ULCAST_(0x7) << 0)
/* GCR_Cx_RESET_BASE register fields */
#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12
return (core * mips_cm_max_vp_width()) + vp;
}
+#ifdef CONFIG_MIPS_CM
+
+/**
+ * mips_cm_lock_other - lock access to another core
+ * @core: the other core to be accessed
+ * @vp: the VP within the other core to be accessed
+ *
+ * Call before operating upon a core via the 'other' register region in
+ * order to prevent the region being moved during access. Must be followed
+ * by a call to mips_cm_unlock_other.
+ */
+extern void mips_cm_lock_other(unsigned int core, unsigned int vp);
+
+/**
+ * mips_cm_unlock_other - unlock access to another core
+ *
+ * Call after operating upon another core via the 'other' register region.
+ * Must be called after mips_cm_lock_other.
+ */
+extern void mips_cm_unlock_other(void);
+
+#else /* !CONFIG_MIPS_CM */
+
+static inline void mips_cm_lock_other(unsigned int core) { }
+static inline void mips_cm_unlock_other(void) { }
+
+#endif /* !CONFIG_MIPS_CM */
+
#endif /* __MIPS_ASM_MIPS_CM_H__ */
* core: the other core to be accessed
*
* Call before operating upon a core via the 'other' register region in
- * order to prevent the region being moved during access. Must be followed
+ * order to prevent the region being moved during access. Must be called
+ * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed
* by a call to mips_cpc_unlock_other.
*/
extern void mips_cpc_lock_other(unsigned int core);
#define CP0_WIRED $6
#define CP0_INFO $7
#define CP0_BADVADDR $8
+#define CP0_BADINSTR $8, 1
#define CP0_COUNT $9
#define CP0_ENTRYHI $10
#define CP0_COMPARE $11
#define CP0_CAUSE $13
#define CP0_EPC $14
#define CP0_PRID $15
+#define CP0_EBASE $15, 1
+#define CP0_CMGCRBASE $15, 3
#define CP0_CONFIG $16
#define CP0_LLADDR $17
#define CP0_WATCHLO $18
#define R3K_ENTRYLO_N (_ULCAST_(1) << 11)
/* MIPS32/64 EntryLo bit definitions */
-#ifdef CONFIG_64BIT
-/* as read by dmfc0 */
-#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 62)
-#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 63)
-#else
-/* as read by mfc0 */
-#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 30)
-#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 31)
-#endif
+#define MIPS_ENTRYLO_PFN_SHIFT 6
+#define MIPS_ENTRYLO_XI (_ULCAST_(1) << (BITS_PER_LONG - 2))
+#define MIPS_ENTRYLO_RI (_ULCAST_(1) << (BITS_PER_LONG - 1))
/*
* Values for PageMask register
*/
#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
-/*
- * A special page (the vdso) is mapped into all processes at the very
- * top of the virtual memory space.
- */
-#define SPECIAL_PAGES_SIZE PAGE_SIZE
-
#ifdef CONFIG_32BIT
#ifdef CONFIG_KVM_GUEST
/* User space process size is limited to 1GB in KVM Guest Mode */
#endif
-#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
+#define STACK_TOP (TASK_SIZE & PAGE_MASK)
/*
* This decides where the kernel will search for a free chunk of vm
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
*
- * Copyright (C) 2009 Cavium Networks
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*/
#ifndef __ASM_VDSO_H
#define __ASM_VDSO_H
-#include <linux/types.h>
+#include <linux/mm_types.h>
+#include <asm/barrier.h>
-#ifdef CONFIG_32BIT
-struct mips_vdso {
- u32 signal_trampoline[2];
- u32 rt_signal_trampoline[2];
+/**
+ * struct mips_vdso_image - Details of a VDSO image.
+ * @data: Pointer to VDSO image data (page-aligned).
+ * @size: Size of the VDSO image data (page-aligned).
+ * @off_sigreturn: Offset of the sigreturn() trampoline.
+ * @off_rt_sigreturn: Offset of the rt_sigreturn() trampoline.
+ * @mapping: Special mapping structure.
+ *
+ * This structure contains details of a VDSO image, including the image data
+ * and offsets of certain symbols required by the kernel. It is generated as
+ * part of the VDSO build process, aside from the mapping page array, which is
+ * populated at runtime.
+ */
+struct mips_vdso_image {
+ void *data;
+ unsigned long size;
+
+ unsigned long off_sigreturn;
+ unsigned long off_rt_sigreturn;
+
+ struct vm_special_mapping mapping;
};
-#else /* !CONFIG_32BIT */
-struct mips_vdso {
- u32 o32_signal_trampoline[2];
- u32 o32_rt_signal_trampoline[2];
- u32 rt_signal_trampoline[2];
- u32 n32_rt_signal_trampoline[2];
+
+/*
+ * The following structures are auto-generated as part of the build for each
+ * ABI by genvdso, see arch/mips/vdso/Makefile.
+ */
+
+extern struct mips_vdso_image vdso_image;
+
+#ifdef CONFIG_MIPS32_O32
+extern struct mips_vdso_image vdso_image_o32;
+#endif
+
+#ifdef CONFIG_MIPS32_N32
+extern struct mips_vdso_image vdso_image_n32;
+#endif
+
+/**
+ * union mips_vdso_data - Data provided by the kernel for the VDSO.
+ * @xtime_sec: Current real time (seconds part).
+ * @xtime_nsec: Current real time (nanoseconds part, shifted).
+ * @wall_to_mono_sec: Wall-to-monotonic offset (seconds part).
+ * @wall_to_mono_nsec: Wall-to-monotonic offset (nanoseconds part).
+ * @seq_count: Counter to synchronise updates (odd = updating).
+ * @cs_shift: Clocksource shift value.
+ * @clock_mode: Clocksource to use for time functions.
+ * @cs_mult: Clocksource multiplier value.
+ * @cs_cycle_last: Clock cycle value at last update.
+ * @cs_mask: Clocksource mask value.
+ * @tz_minuteswest: Minutes west of Greenwich (from timezone).
+ * @tz_dsttime: Type of DST correction (from timezone).
+ *
+ * This structure contains data needed by functions within the VDSO. It is
+ * populated by the kernel and mapped read-only into user memory. The time
+ * fields are mirrors of internal data from the timekeeping infrastructure.
+ *
+ * Note: Care should be taken when modifying as the layout must remain the same
+ * for both 64- and 32-bit (for 32-bit userland on 64-bit kernel).
+ */
+union mips_vdso_data {
+ struct {
+ u64 xtime_sec;
+ u64 xtime_nsec;
+ u32 wall_to_mono_sec;
+ u32 wall_to_mono_nsec;
+ u32 seq_count;
+ u32 cs_shift;
+ u8 clock_mode;
+ u32 cs_mult;
+ u64 cs_cycle_last;
+ u64 cs_mask;
+ s32 tz_minuteswest;
+ s32 tz_dsttime;
+ };
+
+ u8 page[PAGE_SIZE];
};
-#endif /* CONFIG_32BIT */
+
+static inline u32 vdso_data_read_begin(const union mips_vdso_data *data)
+{
+ u32 seq;
+
+ while (true) {
+ seq = ACCESS_ONCE(data->seq_count);
+ if (likely(!(seq & 1))) {
+ /* Paired with smp_wmb() in vdso_data_write_*(). */
+ smp_rmb();
+ return seq;
+ }
+
+ cpu_relax();
+ }
+}
+
+static inline bool vdso_data_read_retry(const union mips_vdso_data *data,
+ u32 start_seq)
+{
+ /* Paired with smp_wmb() in vdso_data_write_*(). */
+ smp_rmb();
+ return unlikely(data->seq_count != start_seq);
+}
+
+static inline void vdso_data_write_begin(union mips_vdso_data *data)
+{
+ ++data->seq_count;
+
+ /* Ensure sequence update is written before other data page values. */
+ smp_wmb();
+}
+
+static inline void vdso_data_write_end(union mips_vdso_data *data)
+{
+ /* Ensure data values are written before updating sequence again. */
+ smp_wmb();
+ ++data->seq_count;
+}
#endif /* __ASM_VDSO_H */
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-generic-y += auxvec.h
generic-y += ipcbuf.h
+header-y += auxvec.h
header-y += bitfield.h
header-y += bitsperlong.h
header-y += break.h
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_AUXVEC_H
+#define __ASM_AUXVEC_H
+
+/* Location of VDSO image. */
+#define AT_SYSINFO_EHDR 33
+
+#endif /* __ASM_AUXVEC_H */
#define __SWAB_64_THRU_32__
-#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
- defined(_MIPS_ARCH_LOONGSON3A)
+#if !defined(__mips16) && \
+ ((defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
+ defined(_MIPS_ARCH_LOONGSON3A))
-static inline __attribute__((nomips16)) __attribute_const__
- __u16 __arch_swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
- " .set nomips16 \n"
" wsbh %0, %1 \n"
" .set pop \n"
: "=r" (x)
}
#define __arch_swab16 __arch_swab16
-static inline __attribute__((nomips16)) __attribute_const__
- __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
- " .set nomips16 \n"
" wsbh %0, %1 \n"
" rotr %0, %0, 16 \n"
" .set pop \n"
* 64-bit kernel on r2 CPUs.
*/
#ifdef __mips64
-static inline __attribute__((nomips16)) __attribute_const__
- __u64 __arch_swab64(__u64 x)
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" .set push \n"
" .set arch=mips64r2 \n"
- " .set nomips16 \n"
" dsbh %0, %1 \n"
" dshd %0, %0 \n"
" .set pop \n"
}
#define __arch_swab64 __arch_swab64
#endif /* __mips64 */
-#endif /* MIPS R2 or newer or Loongson 3A */
+#endif /* (not __mips16) and (MIPS R2 or newer or Loongson 3A) */
#endif /* _ASM_SWAB_H */
#include <linux/power_supply.h>
#include <linux/power/jz4740-battery.h>
#include <linux/power/gpio-charger.h>
+#include <linux/pwm.h>
#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
-#include <linux/leds_pwm.h>
-
#include <asm/mach-jz4740/platform.h>
#include "clock.h"
}
};
+static struct pwm_lookup qi_lb60_pwm_lookup[] = {
+ PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
+ PWM_POLARITY_NORMAL),
+};
+
/* beeper */
static struct platform_device qi_lb60_pwm_beeper = {
.name = "pwm-beeper",
.id = -1,
- .dev = {
- .platform_data = (void *)4,
- },
};
/* charger */
platform_device_register(&jz4740_usb_ohci_device);
}
+ pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
+
return platform_add_devices(jz_platform_devices,
ARRAY_SIZE(jz_platform_devices));
obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o
+obj-$(CONFIG_MIPS_CPS_NS16550) += cps-vec-ns16550.o
obj-$(CONFIG_MIPS_GIC_IPI) += smp-gic.o
obj-$(CONFIG_MIPS_SPRAM) += spram.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <linux/serial_reg.h>
+
+#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+
+/**
+ * _mips_cps_putc() - write a character to the UART
+ * @a0: ASCII character to write
+ * @t9: UART base address
+ */
+LEAF(_mips_cps_putc)
+1: lw t0, UART_LSR_OFS(t9)
+ andi t0, t0, UART_LSR_TEMT
+ beqz t0, 1b
+ sb a0, UART_TX_OFS(t9)
+ jr ra
+ END(_mips_cps_putc)
+
+/**
+ * _mips_cps_puts() - write a string to the UART
+ * @a0: pointer to NULL-terminated ASCII string
+ * @t9: UART base address
+ *
+ * Write a null-terminated ASCII string to the UART.
+ */
+NESTED(_mips_cps_puts, 0, ra)
+ move s7, ra
+ move s6, a0
+
+1: lb a0, 0(s6)
+ beqz a0, 2f
+ jal _mips_cps_putc
+ PTR_ADDIU s6, s6, 1
+ b 1b
+
+2: jr s7
+ END(_mips_cps_puts)
+
+/**
+ * _mips_cps_putx4 - write a 4b hex value to the UART
+ * @a0: the 4b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a single hexadecimal character to the UART.
+ */
+NESTED(_mips_cps_putx4, 0, ra)
+ andi a0, a0, 0xf
+ li t0, '0'
+ blt a0, 10, 1f
+ li t0, 'a'
+ addiu a0, a0, -10
+1: addu a0, a0, t0
+ b _mips_cps_putc
+ END(_mips_cps_putx4)
+
+/**
+ * _mips_cps_putx8 - write an 8b hex value to the UART
+ * @a0: the 8b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx8, 0, ra)
+ move s3, ra
+ move s2, a0
+ srl a0, a0, 4
+ jal _mips_cps_putx4
+ move a0, s2
+ move ra, s3
+ b _mips_cps_putx4
+ END(_mips_cps_putx8)
+
+/**
+ * _mips_cps_putx16 - write a 16b hex value to the UART
+ * @a0: the 16b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx16, 0, ra)
+ move s5, ra
+ move s4, a0
+ srl a0, a0, 8
+ jal _mips_cps_putx8
+ move a0, s4
+ move ra, s5
+ b _mips_cps_putx8
+ END(_mips_cps_putx16)
+
+/**
+ * _mips_cps_putx32 - write a 32b hex value to the UART
+ * @a0: the 32b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx32, 0, ra)
+ move s7, ra
+ move s6, a0
+ srl a0, a0, 16
+ jal _mips_cps_putx16
+ move a0, s6
+ move ra, s7
+ b _mips_cps_putx16
+ END(_mips_cps_putx32)
+
+#ifdef CONFIG_64BIT
+
+/**
+ * _mips_cps_putx64 - write a 64b hex value to the UART
+ * @a0: the 64b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx64, 0, ra)
+ move sp, ra
+ move s8, a0
+ dsrl32 a0, a0, 0
+ jal _mips_cps_putx32
+ move a0, s8
+ move ra, sp
+ b _mips_cps_putx32
+ END(_mips_cps_putx64)
+
+#define _mips_cps_putxlong _mips_cps_putx64
+
+#else /* !CONFIG_64BIT */
+
+#define _mips_cps_putxlong _mips_cps_putx32
+
+#endif /* !CONFIG_64BIT */
+
+/**
+ * mips_cps_bev_dump() - dump relevant exception state to UART
+ * @a0: pointer to NULL-terminated ASCII string naming the exception
+ *
+ * Write information that may be useful in debugging an exception to the
+ * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception
+ * will only be run if something goes horribly wrong very early during
+ * the bringup of a core and it is very likely to be unsafe to perform
+ * memory accesses at that point (cache state indeterminate, EVA may not
+ * be configured, coherence may be disabled) let alone have a stack,
+ * this is all written in assembly using only registers & unmapped
+ * uncached access to the UART registers.
+ */
+LEAF(mips_cps_bev_dump)
+ move s0, ra
+ move s1, a0
+
+ li t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE)
+
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ PTR_LA a0, str_bev
+ jal _mips_cps_puts
+ move a0, s1
+ jal _mips_cps_puts
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+
+#define DUMP_COP0_REG(reg, name, sz, _mfc0) \
+ PTR_LA a0, 8f; \
+ jal _mips_cps_puts; \
+ _mfc0 a0, reg; \
+ jal _mips_cps_putx##sz; \
+ PTR_LA a0, str_newline; \
+ jal _mips_cps_puts; \
+ TEXT(name)
+
+ DUMP_COP0_REG(CP0_CAUSE, "Cause: 0x", 32, mfc0)
+ DUMP_COP0_REG(CP0_STATUS, "Status: 0x", 32, mfc0)
+ DUMP_COP0_REG(CP0_EBASE, "EBase: 0x", long, MFC0)
+ DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0)
+ DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0)
+
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ jr s0
+ END(mips_cps_bev_dump)
+
+.pushsection .data
+str_bev: .asciiz "BEV Exception: "
+str_newline: .asciiz "\r\n"
+.popsection
.set noreorder
+#ifdef CONFIG_64BIT
+# define STATUS_BITDEPS ST0_KX
+#else
+# define STATUS_BITDEPS 0
+#endif
+
+#ifdef CONFIG_MIPS_CPS_NS16550
+
+#define DUMP_EXCEP(name) \
+ PTR_LA a0, 8f; \
+ jal mips_cps_bev_dump; \
+ nop; \
+ TEXT(name)
+
+#else /* !CONFIG_MIPS_CPS_NS16550 */
+
+#define DUMP_EXCEP(name)
+
+#endif /* !CONFIG_MIPS_CPS_NS16550 */
+
/*
* Set dest to non-zero if the core supports the MT ASE, else zero. If
* MT is not supported then branch to nomt.
*/
.macro has_mt dest, nomt
- mfc0 \dest, CP0_CONFIG
- bgez \dest, \nomt
- mfc0 \dest, CP0_CONFIG, 1
+ mfc0 \dest, CP0_CONFIG, 1
bgez \dest, \nomt
mfc0 \dest, CP0_CONFIG, 2
bgez \dest, \nomt
LEAF(mips_cps_core_entry)
/*
- * These first 12 bytes will be patched by cps_smp_setup to load the
- * base address of the CM GCRs into register v1 and the CCA to use into
- * register s0.
+ * These first 4 bytes will be patched by cps_smp_setup to load the
+ * CCA to use into register s0.
*/
- .quad 0
.word 0
/* Check whether we're here due to an NMI */
mtc0 t0, CP0_CAUSE
/* Setup Status */
- li t0, ST0_CU1 | ST0_CU0
+ li t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
mtc0 t0, CP0_STATUS
/*
mtc0 t0, CP0_CONFIG
ehb
+ /* Calculate an uncached address for the CM GCRs */
+ MFC0 v1, CP0_CMGCRBASE
+ PTR_SLL v1, v1, 4
+ PTR_LI t0, UNCAC_BASE
+ PTR_ADDU v1, v1, t0
+
/* Enter the coherent domain */
li t0, 0xff
sw t0, GCR_CL_COHERENCE_OFS(v1)
.org 0x200
LEAF(excep_tlbfill)
+ DUMP_EXCEP("TLB Fill")
b .
nop
END(excep_tlbfill)
.org 0x280
LEAF(excep_xtlbfill)
+ DUMP_EXCEP("XTLB Fill")
b .
nop
END(excep_xtlbfill)
.org 0x300
LEAF(excep_cache)
+ DUMP_EXCEP("Cache")
b .
nop
END(excep_cache)
.org 0x380
LEAF(excep_genex)
+ DUMP_EXCEP("General")
b .
nop
END(excep_genex)
.org 0x400
LEAF(excep_intex)
+ DUMP_EXCEP("Interrupt")
b .
nop
END(excep_intex)
.org 0x480
LEAF(excep_ejtag)
+ DUMP_EXCEP("EJTAG")
PTR_LA k0, ejtag_debug_handler
jr k0
nop
c->options |= MIPS_CPU_SEGMENTS;
if (config3 & MIPS_CONF3_MSA)
c->ases |= MIPS_ASE_MSA;
- /* Only tested on 32-bit cores */
- if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT)) {
+ if (config3 & MIPS_CONF3_PW) {
c->htw_seq = 0;
c->options |= MIPS_CPU_HTW;
}
return read_c0_count();
}
+static inline unsigned int rdhwr_count(void)
+{
+ unsigned int count;
+
+ __asm__ __volatile__(
+ " .set push\n"
+ " .set mips32r2\n"
+ " rdhwr %0, $2\n"
+ " .set pop\n"
+ : "=r" (count));
+
+ return count;
+}
+
+static bool rdhwr_count_usable(void)
+{
+ unsigned int prev, curr, i;
+
+ /*
+ * Older QEMUs have a broken implementation of RDHWR for the CP0 count
+ * which always returns a constant value. Try to identify this and don't
+ * use it in the VDSO if it is broken. This workaround can be removed
+ * once the fix has been in QEMU stable for a reasonable amount of time.
+ */
+ for (i = 0, prev = rdhwr_count(); i < 100; i++) {
+ curr = rdhwr_count();
+
+ if (curr != prev)
+ return true;
+
+ prev = curr;
+ }
+
+ pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n");
+ return false;
+}
+
int __init init_r4k_clocksource(void)
{
if (!cpu_has_counter || !mips_hpt_frequency)
/* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+ /*
+ * R2 onwards makes the count accessible to user mode so it can be used
+ * by the VDSO (HWREna is configured by configure_hwrena()).
+ */
+ if (cpu_has_mips_r2_r6 && rdhwr_count_usable())
+ clocksource_mips.archdata.vdso_clock_mode = VDSO_CLOCK_R4K;
+
clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency);
return;
}
+ /*
+ * MIPSr6 specifies that masked interrupts should unblock an executing
+ * wait instruction, and thus that it is safe for us to use
+ * r4k_wait_irqoff. Yippee!
+ */
+ if (cpu_has_mips_r6) {
+ cpu_wait = r4k_wait_irqoff;
+ return;
+ }
+
switch (current_cpu_type()) {
case CPU_R3081:
case CPU_R3081E:
case CPU_INTERAPTIV:
case CPU_M5150:
case CPU_QEMU_GENERIC:
- case CPU_I6400:
cpu_wait = r4k_wait;
if (read_c0_config7() & MIPS_CONF7_WII)
cpu_wait = r4k_wait_irqoff;
*/
#include <linux/errno.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
#include <asm/mips-cm.h>
#include <asm/mipsregs.h>
"0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
};
+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
+static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
+
phys_addr_t __mips_cm_phys_base(void)
{
u32 config3 = read_c0_config3();
{
phys_addr_t addr;
u32 base_reg;
+ unsigned cpu;
/*
* No need to probe again if we have already been
/* determine register width for this CM */
mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
+ for_each_possible_cpu(cpu)
+ spin_lock_init(&per_cpu(cm_core_lock, cpu));
+
return 0;
}
-void mips_cm_error_report(void)
+void mips_cm_lock_other(unsigned int core, unsigned int vp)
{
- unsigned long revision = mips_cm_revision();
+ unsigned curr_core;
+ u32 val;
+
+ preempt_disable();
+ curr_core = current_cpu_data.core;
+ spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
+ per_cpu(cm_core_lock_flags, curr_core));
+
+ if (mips_cm_revision() >= CM_REV_CM3) {
+ val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
+ val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
+ } else {
+ BUG_ON(vp != 0);
+ val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
+ }
+
+ write_gcr_cl_other(val);
+
/*
- * CM3 has a 64-bit Error cause register with 0:57 containing the error
- * info and 63:58 the error type. For old CMs, everything is contained
- * in a single 32-bit register (0:26 and 31:27 respectively). Even
- * though the cm_error is u64, we will simply ignore the upper word
- * for CM2.
+ * Ensure the core-other region reflects the appropriate core &
+ * VP before any accesses to it occur.
*/
- u64 cm_error = read_gcr_error_cause();
- int cm_error_cause_sft = CM_GCR_ERROR_CAUSE_ERRTYPE_SHF +
- ((revision >= CM_REV_CM3) ? 31 : 0);
- unsigned long cm_addr = read_gcr_error_addr();
- unsigned long cm_other = read_gcr_error_mult();
+ mb();
+}
+
+void mips_cm_unlock_other(void)
+{
+ unsigned curr_core = current_cpu_data.core;
+
+ spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
+ per_cpu(cm_core_lock_flags, curr_core));
+ preempt_enable();
+}
+
+void mips_cm_error_report(void)
+{
+ u64 cm_error, cm_addr, cm_other;
+ unsigned long revision;
int ocause, cause;
char buf[256];
if (!mips_cm_present())
return;
- cause = cm_error >> cm_error_cause_sft;
+ revision = mips_cm_revision();
- if (!cause)
- /* All good */
- return;
-
- ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
if (revision < CM_REV_CM3) { /* CM2 */
+ cm_error = read_gcr_error_cause();
+ cm_addr = read_gcr_error_addr();
+ cm_other = read_gcr_error_mult();
+ cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+ ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+ if (!cause)
+ return;
+
if (cause < 16) {
unsigned long cca_bits = (cm_error >> 15) & 7;
unsigned long tr_bits = (cm_error >> 12) & 7;
}
pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
cm2_causes[cause], buf);
- pr_err("CM_ADDR =%08lx\n", cm_addr);
- pr_err("CM_OTHER=%08lx %s\n", cm_other, cm2_causes[ocause]);
+ pr_err("CM_ADDR =%08llx\n", cm_addr);
+ pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);
} else { /* CM3 */
- /* Used by cause == {1,2,3} */
- unsigned long core_id_bits = (cm_error >> 22) & 0xf;
- unsigned long vp_id_bits = (cm_error >> 18) & 0xf;
- unsigned long cmd_bits = (cm_error >> 14) & 0xf;
- unsigned long cmd_group_bits = (cm_error >> 11) & 0xf;
- unsigned long cm3_cca_bits = (cm_error >> 8) & 7;
- unsigned long mcp_bits = (cm_error >> 5) & 0xf;
- unsigned long cm3_tr_bits = (cm_error >> 1) & 0xf;
- unsigned long sched_bit = cm_error & 0x1;
+ ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
+ ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
+
+ cm_error = read64_gcr_error_cause();
+ cm_addr = read64_gcr_error_addr();
+ cm_other = read64_gcr_error_mult();
+ cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+ ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+ if (!cause)
+ return;
+
+ /* Used by cause == {1,2,3} */
+ core_id_bits = (cm_error >> 22) & 0xf;
+ vp_id_bits = (cm_error >> 18) & 0xf;
+ cmd_bits = (cm_error >> 14) & 0xf;
+ cmd_group_bits = (cm_error >> 11) & 0xf;
+ cm3_cca_bits = (cm_error >> 8) & 7;
+ mcp_bits = (cm_error >> 5) & 0xf;
+ cm3_tr_bits = (cm_error >> 1) & 0xf;
+ sched_bit = cm_error & 0x1;
if (cause == 1 || cause == 3) { /* Tag ECC */
unsigned long tag_ecc = (cm_error >> 57) & 0x1;
cm3_cmd_group[cmd_group_bits],
cm3_cca_bits, 1 << mcp_bits,
cm3_tr[cm3_tr_bits], sched_bit);
+ } else {
+ buf[0] = 0;
}
pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,
cm3_causes[cause], buf);
- pr_err("CM_ADDR =%lx\n", cm_addr);
- pr_err("CM_OTHER=%lx %s\n", cm_other, cm3_causes[ocause]);
+ pr_err("CM_ADDR =%llx\n", cm_addr);
+ pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);
}
/* reprime cause register */
spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
per_cpu(cpc_core_lock_flags, curr_core));
write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF);
+
+ /*
+ * Ensure the core-other region reflects the appropriate core &
+ * VP before any accesses to it occur.
+ */
+ mb();
}
void mips_cpc_unlock_other(void)
#include <asm/asm.h>
#include <asm/branch.h>
#include <asm/break.h>
+#include <asm/debug.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/inst.h>
static int __init mipsr2_init_debugfs(void)
{
- extern struct dentry *mips_debugfs_dir;
struct dentry *mipsr2_emul;
if (!mips_debugfs_dir)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <asm/cpu.h>
+#include <asm/debug.h>
#include <asm/mipsregs.h>
static void build_segment_config(char *str, unsigned int cfg)
static int __init segments_info(void)
{
- extern struct dentry *mips_debugfs_dir;
struct dentry *segments;
if (cpu_has_segments) {
#include <asm/cache.h>
#include <asm/cdmm.h>
#include <asm/cpu.h>
+#include <asm/debug.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp-ops.h>
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
-#include <asm/vdso.h>
#include <asm/dsp.h>
#include <asm/inst.h>
#include <asm/msa.h>
struct mips_abi mips_abi = {
#ifdef CONFIG_TRAD_SIGNALS
.setup_frame = setup_frame,
- .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
#endif
.setup_rt_frame = setup_rt_frame,
- .rt_signal_return_offset =
- offsetof(struct mips_vdso, rt_signal_trampoline),
.restart = __NR_restart_syscall,
.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+ .vdso = &vdso_image,
};
static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
}
if (sig_uses_siginfo(&ksig->ka))
- ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+ ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
ksig, regs, oldset);
else
- ret = abi->setup_frame(vdso + abi->signal_return_offset, ksig,
- regs, oldset);
+ ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn,
+ ksig, regs, oldset);
signal_setup_done(ret, ksig, 0);
}
#include <asm/ucontext.h>
#include <asm/fpu.h>
#include <asm/war.h>
-#include <asm/vdso.h>
#include <asm/dsp.h>
#include "signal-common.h"
*/
struct mips_abi mips_abi_32 = {
.setup_frame = setup_frame_32,
- .signal_return_offset =
- offsetof(struct mips_vdso, o32_signal_trampoline),
.setup_rt_frame = setup_rt_frame_32,
- .rt_signal_return_offset =
- offsetof(struct mips_vdso, o32_rt_signal_trampoline),
.restart = __NR_O32_restart_syscall,
.off_sc_fpregs = offsetof(struct sigcontext32, sc_fpregs),
.off_sc_fpc_csr = offsetof(struct sigcontext32, sc_fpc_csr),
.off_sc_used_math = offsetof(struct sigcontext32, sc_used_math),
+
+ .vdso = &vdso_image_o32,
};
#include <asm/fpu.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
-#include <asm/vdso.h>
#include "signal-common.h"
struct mips_abi mips_abi_n32 = {
.setup_rt_frame = setup_rt_frame_n32,
- .rt_signal_return_offset =
- offsetof(struct mips_vdso, n32_rt_signal_trampoline),
.restart = __NR_N32_restart_syscall,
.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+ .vdso = &vdso_image_n32,
};
* option) any later version.
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irqchip/mips-gic.h>
#include <linux/sched.h>
if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
return 1;
- write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+ mips_cm_lock_other(core, 0);
cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
+ mips_cm_unlock_other();
return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
}
/*
* Patch the start of mips_cps_core_entry to provide:
*
- * v1 = CM base address
* s0 = kseg0 CCA
*/
entry_code = (u32 *)&mips_cps_core_entry;
- UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
uasm_i_addiu(&entry_code, 16, 0, cca);
blast_dcache_range((unsigned long)&mips_cps_core_entry,
(unsigned long)entry_code);
static void boot_core(unsigned core)
{
- u32 access;
+ u32 access, stat, seq_state;
+ unsigned timeout;
/* Select the appropriate core */
- write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+ mips_cm_lock_other(core, 0);
/* Set its reset vector */
write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
/* Reset the core */
mips_cpc_lock_other(core);
write_cpc_co_cmd(CPC_Cx_CMD_RESET);
+
+ timeout = 100;
+ while (true) {
+ stat = read_cpc_co_stat_conf();
+ seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE_MSK;
+
+ /* U6 == coherent execution, ie. the core is up */
+ if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U6)
+ break;
+
+ /* Delay a little while before we start warning */
+ if (timeout) {
+ timeout--;
+ mdelay(10);
+ continue;
+ }
+
+ pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n",
+ core, stat);
+ mdelay(1000);
+ }
+
mips_cpc_unlock_other();
} else {
/* Take the core out of reset */
write_gcr_co_reset_release(0);
}
+ mips_cm_unlock_other();
+
/* The core is now powered up */
bitmap_set(core_power, core, 1);
}
if (mips_cpc_present() && (core != current_cpu_data.core)) {
while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+ mips_cm_lock_other(core, 0);
mips_cpc_lock_other(core);
write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
mips_cpc_unlock_other();
+ mips_cm_unlock_other();
}
}
#include <linux/debugfs.h>
#include <linux/export.h>
#include <linux/spinlock.h>
-
+#include <asm/debug.h>
static int ss_get(void *data, u64 *val)
{
DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
-
-extern struct dentry *mips_debugfs_dir;
static int __init spinlock_test(void)
{
struct dentry *d;
* Save stack-backtrace addresses into a stack_trace buffer:
*/
static void save_raw_context_stack(struct stack_trace *trace,
- unsigned long reg29)
+ unsigned long reg29, int savesched)
{
unsigned long *sp = (unsigned long *)reg29;
unsigned long addr;
while (!kstack_end(sp)) {
addr = *sp++;
- if (__kernel_text_address(addr)) {
+ if (__kernel_text_address(addr) &&
+ (savesched || !in_sched_functions(addr))) {
if (trace->skip > 0)
trace->skip--;
else
}
static void save_context_stack(struct stack_trace *trace,
- struct task_struct *tsk, struct pt_regs *regs)
+ struct task_struct *tsk, struct pt_regs *regs, int savesched)
{
unsigned long sp = regs->regs[29];
#ifdef CONFIG_KALLSYMS
(unsigned long)task_stack_page(tsk);
if (stack_page && sp >= stack_page &&
sp <= stack_page + THREAD_SIZE - 32)
- save_raw_context_stack(trace, sp);
+ save_raw_context_stack(trace, sp, savesched);
return;
}
do {
- if (trace->skip > 0)
- trace->skip--;
- else
- trace->entries[trace->nr_entries++] = pc;
- if (trace->nr_entries >= trace->max_entries)
- break;
+ if (savesched || !in_sched_functions(pc)) {
+ if (trace->skip > 0)
+ trace->skip--;
+ else
+ trace->entries[trace->nr_entries++] = pc;
+ if (trace->nr_entries >= trace->max_entries)
+ break;
+ }
pc = unwind_stack(tsk, &sp, pc, &ra);
} while (pc);
#else
- save_raw_context_stack(trace, sp);
+ save_raw_context_stack(trace, sp, savesched);
#endif
}
regs->cp0_epc = tsk->thread.reg31;
} else
prepare_frametrace(regs);
- save_context_stack(trace, tsk, regs);
+ save_context_stack(trace, tsk, regs, tsk == current);
}
EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
#include <linux/irq.h>
#include <linux/perf_event.h>
+#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
#include <asm/break.h>
ebase = (unsigned long)
__alloc_bootmem(size, 1 << fls(size), 0);
} else {
-#ifdef CONFIG_KVM_GUEST
-#define KVM_GUEST_KSEG0 0x40000000
- ebase = KVM_GUEST_KSEG0;
-#else
- ebase = CKSEG0;
-#endif
+ ebase = CAC_BASE;
+
if (cpu_has_mips_r2_r6)
ebase += (read_c0_ebase() & 0x3ffff000);
}
#include <asm/branch.h>
#include <asm/byteorder.h>
#include <asm/cop2.h>
+#include <asm/debug.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/inst.h>
}
#ifdef CONFIG_DEBUG_FS
-extern struct dentry *mips_debugfs_dir;
static int __init debugfs_unaligned(void)
{
struct dentry *d;
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
*
- * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/init.h>
#include <linux/binfmts.h>
#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/unistd.h>
-#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timekeeper_internal.h>
+#include <asm/abi.h>
#include <asm/vdso.h>
-#include <asm/uasm.h>
-#include <asm/processor.h>
+
+/* Kernel-provided data used by the VDSO. */
+static union mips_vdso_data vdso_data __page_aligned_data;
/*
- * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as
+ * what we map and where within the area they are mapped is determined at
+ * runtime.
*/
-#define __NR_O32_sigreturn 4119
-#define __NR_O32_rt_sigreturn 4193
-#define __NR_N32_rt_sigreturn 6211
+static struct page *no_pages[] = { NULL };
+static struct vm_special_mapping vdso_vvar_mapping = {
+ .name = "[vvar]",
+ .pages = no_pages,
+};
-static struct page *vdso_page;
-
-static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+static void __init init_vdso_image(struct mips_vdso_image *image)
{
- uasm_i_addiu(&tramp, 2, 0, sigreturn); /* li v0, sigreturn */
- uasm_i_syscall(&tramp, 0);
+ unsigned long num_pages, i;
+
+ BUG_ON(!PAGE_ALIGNED(image->data));
+ BUG_ON(!PAGE_ALIGNED(image->size));
+
+ num_pages = image->size / PAGE_SIZE;
+
+ for (i = 0; i < num_pages; i++) {
+ image->mapping.pages[i] =
+ virt_to_page(image->data + (i * PAGE_SIZE));
+ }
}
static int __init init_vdso(void)
{
- struct mips_vdso *vdso;
-
- vdso_page = alloc_page(GFP_KERNEL);
- if (!vdso_page)
- panic("Cannot allocate vdso");
-
- vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
- if (!vdso)
- panic("Cannot map vdso");
- clear_page(vdso);
-
- install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
-#ifdef CONFIG_32BIT
- install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
-#else
- install_trampoline(vdso->n32_rt_signal_trampoline,
- __NR_N32_rt_sigreturn);
- install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
- install_trampoline(vdso->o32_rt_signal_trampoline,
- __NR_O32_rt_sigreturn);
+ init_vdso_image(&vdso_image);
+
+#ifdef CONFIG_MIPS32_O32
+ init_vdso_image(&vdso_image_o32);
#endif
- vunmap(vdso);
+#ifdef CONFIG_MIPS32_N32
+ init_vdso_image(&vdso_image_n32);
+#endif
return 0;
}
subsys_initcall(init_vdso);
-static unsigned long vdso_addr(unsigned long start)
+void update_vsyscall(struct timekeeper *tk)
{
- unsigned long offset = 0UL;
-
- if (current->flags & PF_RANDOMIZE) {
- offset = get_random_int();
- offset <<= PAGE_SHIFT;
- if (TASK_IS_32BIT_ADDR)
- offset &= 0xfffffful;
- else
- offset &= 0xffffffful;
+ vdso_data_write_begin(&vdso_data);
+
+ vdso_data.xtime_sec = tk->xtime_sec;
+ vdso_data.xtime_nsec = tk->tkr_mono.xtime_nsec;
+ vdso_data.wall_to_mono_sec = tk->wall_to_monotonic.tv_sec;
+ vdso_data.wall_to_mono_nsec = tk->wall_to_monotonic.tv_nsec;
+ vdso_data.cs_shift = tk->tkr_mono.shift;
+
+ vdso_data.clock_mode = tk->tkr_mono.clock->archdata.vdso_clock_mode;
+ if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+ vdso_data.cs_mult = tk->tkr_mono.mult;
+ vdso_data.cs_cycle_last = tk->tkr_mono.cycle_last;
+ vdso_data.cs_mask = tk->tkr_mono.mask;
}
- return STACK_TOP + offset;
+ vdso_data_write_end(&vdso_data);
+}
+
+void update_vsyscall_tz(void)
+{
+ if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+ vdso_data.tz_minuteswest = sys_tz.tz_minuteswest;
+ vdso_data.tz_dsttime = sys_tz.tz_dsttime;
+ }
}
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
- int ret;
- unsigned long addr;
+ struct mips_vdso_image *image = current->thread.abi->vdso;
struct mm_struct *mm = current->mm;
+ unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr;
+ struct vm_area_struct *vma;
+ struct resource gic_res;
+ int ret;
down_write(&mm->mmap_sem);
- addr = vdso_addr(mm->start_stack);
+ /*
+ * Determine total area size. This includes the VDSO data itself, the
+ * data page, and the GIC user page if present. Always create a mapping
+ * for the GIC user area if the GIC is present regardless of whether it
+ * is the current clocksource, in case it comes into use later on. We
+ * only map a page even though the total area is 64K, as we only need
+ * the counter registers at the start.
+ */
+ gic_size = gic_present ? PAGE_SIZE : 0;
+ vvar_size = gic_size + PAGE_SIZE;
+ size = vvar_size + image->size;
+
+ base = get_unmapped_area(NULL, 0, size, 0, 0);
+ if (IS_ERR_VALUE(base)) {
+ ret = base;
+ goto out;
+ }
+
+ data_addr = base + gic_size;
+ vdso_addr = data_addr + PAGE_SIZE;
- addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
- if (IS_ERR_VALUE(addr)) {
- ret = addr;
- goto up_fail;
+ vma = _install_special_mapping(mm, base, vvar_size,
+ VM_READ | VM_MAYREAD,
+ &vdso_vvar_mapping);
+ if (IS_ERR(vma)) {
+ ret = PTR_ERR(vma);
+ goto out;
}
- ret = install_special_mapping(mm, addr, PAGE_SIZE,
- VM_READ|VM_EXEC|
- VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
- &vdso_page);
+ /* Map GIC user page. */
+ if (gic_size) {
+ ret = gic_get_usm_range(&gic_res);
+ if (ret)
+ goto out;
+
+ ret = io_remap_pfn_range(vma, base,
+ gic_res.start >> PAGE_SHIFT,
+ gic_size,
+ pgprot_noncached(PAGE_READONLY));
+ if (ret)
+ goto out;
+ }
+ /* Map data page. */
+ ret = remap_pfn_range(vma, data_addr,
+ virt_to_phys(&vdso_data) >> PAGE_SHIFT,
+ PAGE_SIZE, PAGE_READONLY);
if (ret)
- goto up_fail;
+ goto out;
+
+ /* Map VDSO image. */
+ vma = _install_special_mapping(mm, vdso_addr, image->size,
+ VM_READ | VM_EXEC |
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+ &image->mapping);
+ if (IS_ERR(vma)) {
+ ret = PTR_ERR(vma);
+ goto out;
+ }
- mm->context.vdso = (void *)addr;
+ mm->context.vdso = (void *)vdso_addr;
+ ret = 0;
-up_fail:
+out:
up_write(&mm->mmap_sem);
return ret;
}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
- if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
- return "[vdso]";
- return NULL;
-}
}
EXPORT_SYMBOL(clk_set_rate);
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (unlikely(!clk_good(clk)))
+ return 0;
+ if (clk->rates && *clk->rates) {
+ unsigned long *r = clk->rates;
+
+ while (*r && (*r != rate))
+ r++;
+ if (!*r) {
+ return clk->rate;
+ }
+ }
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
int clk_enable(struct clk *clk)
{
if (unlikely(!clk_good(clk)))
#define CLOCK_240M 240000000
#define CLOCK_250M 250000000
#define CLOCK_266M 266666666
+#define CLOCK_288M 288888888
#define CLOCK_300M 300000000
#define CLOCK_333M 333333333
+#define CLOCK_360M 360000000
#define CLOCK_393M 393215332
#define CLOCK_400M 400000000
+#define CLOCK_432M 432000000
#define CLOCK_450M 450000000
#define CLOCK_500M 500000000
#define CLOCK_600M 600000000
+#define CLOCK_666M 666666666
+#define CLOCK_720M 720000000
/* clock out speeds */
#define CLOCK_32_768K 32768
extern unsigned long ltq_vr9_fpi_hz(void);
extern unsigned long ltq_vr9_pp32_hz(void);
+extern unsigned long ltq_ar10_cpu_hz(void);
+extern unsigned long ltq_ar10_fpi_hz(void);
+extern unsigned long ltq_ar10_pp32_hz(void);
+
+extern unsigned long ltq_grx390_cpu_hz(void);
+extern unsigned long ltq_grx390_fpi_hz(void);
+extern unsigned long ltq_grx390_pp32_hz(void);
+
#endif
if (of_address_to_resource(node, i, &res))
panic("Failed to get icu memory range");
- if (request_mem_region(res.start, resource_size(&res),
- res.name) < 0)
+ if (!request_mem_region(res.start, resource_size(&res),
+ res.name))
pr_err("Failed to request icu memory");
ltq_icu_membase[i] = ioremap_nocache(res.start,
if (ret != exin_avail)
panic("failed to load external irq resources");
- if (request_mem_region(res.start, resource_size(&res),
- res.name) < 0)
+ if (!request_mem_region(res.start, resource_size(&res),
+ res.name))
pr_err("Failed to request eiu memory");
ltq_eiu_membase = ioremap_nocache(res.start,
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
*/
#include <linux/io.h>
/* legacy xway clock */
#define CGU_SYS 0x10
-/* vr9 clock */
-#define CGU_SYS_VR9 0x0c
-#define CGU_IF_CLK_VR9 0x24
+/* vr9, ar10/grx390 clock */
+#define CGU_SYS_XRX 0x0c
+#define CGU_IF_CLK_AR10 0x24
unsigned long ltq_danube_fpi_hz(void)
{
unsigned int cpu_sel;
unsigned long clk;
- cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf;
+ cpu_sel = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0xf;
switch (cpu_sel) {
case 0:
unsigned long clk;
cpu_clk = ltq_vr9_cpu_hz();
- ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3;
+ ocp_sel = ltq_cgu_r32(CGU_SYS_XRX) & 0x3;
switch (ocp_sel) {
case 0:
unsigned long ltq_vr9_pp32_hz(void)
{
- unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
+ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
unsigned long clk;
switch (clksys) {
+ case 0:
+ clk = CLOCK_500M;
+ break;
case 1:
- clk = CLOCK_450M;
+ clk = CLOCK_432M;
break;
case 2:
- clk = CLOCK_300M;
+ clk = CLOCK_288M;
break;
default:
clk = CLOCK_500M;
return clk;
}
+
+unsigned long ltq_ar10_cpu_hz(void)
+{
+ unsigned int clksys;
+ int cpu_fs = (ltq_cgu_r32(CGU_SYS_XRX) >> 8) & 0x1;
+ int freq_div = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7;
+
+ switch (cpu_fs) {
+ case 0:
+ clksys = CLOCK_500M;
+ break;
+ case 1:
+ clksys = CLOCK_600M;
+ break;
+ default:
+ clksys = CLOCK_500M;
+ break;
+ }
+
+ switch (freq_div) {
+ case 0:
+ return clksys;
+ case 1:
+ return clksys >> 1;
+ case 2:
+ return clksys >> 2;
+ default:
+ return clksys;
+ }
+}
+
+unsigned long ltq_ar10_fpi_hz(void)
+{
+ int freq_fpi = (ltq_cgu_r32(CGU_IF_CLK_AR10) >> 25) & 0xf;
+
+ switch (freq_fpi) {
+ case 1:
+ return CLOCK_300M;
+ case 5:
+ return CLOCK_250M;
+ case 2:
+ return CLOCK_150M;
+ case 6:
+ return CLOCK_125M;
+
+ default:
+ return CLOCK_125M;
+ }
+}
+
+unsigned long ltq_ar10_pp32_hz(void)
+{
+ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+ unsigned long clk;
+
+ switch (clksys) {
+ case 1:
+ clk = CLOCK_250M;
+ break;
+ case 4:
+ clk = CLOCK_400M;
+ break;
+ default:
+ clk = CLOCK_250M;
+ break;
+ }
+
+ return clk;
+}
+
+unsigned long ltq_grx390_cpu_hz(void)
+{
+ unsigned int clksys;
+ int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+ int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7);
+
+ switch (cpu_fs) {
+ case 0:
+ clksys = CLOCK_600M;
+ break;
+ case 1:
+ clksys = CLOCK_666M;
+ break;
+ case 2:
+ clksys = CLOCK_720M;
+ break;
+ default:
+ clksys = CLOCK_600M;
+ break;
+ }
+
+ switch (freq_div) {
+ case 0:
+ return clksys;
+ case 1:
+ return clksys >> 1;
+ case 2:
+ return clksys >> 2;
+ default:
+ return clksys;
+ }
+}
+
+unsigned long ltq_grx390_fpi_hz(void)
+{
+ /* fpi clock is derived from ddr_clk */
+ unsigned int clksys;
+ int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+ int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX)) & 0x7);
+ switch (cpu_fs) {
+ case 0:
+ clksys = CLOCK_600M;
+ break;
+ case 1:
+ clksys = CLOCK_666M;
+ break;
+ case 2:
+ clksys = CLOCK_720M;
+ break;
+ default:
+ clksys = CLOCK_600M;
+ break;
+ }
+
+ switch (freq_div) {
+ case 1:
+ return clksys >> 1;
+ case 2:
+ return clksys >> 2;
+ default:
+ return clksys >> 1;
+ }
+}
+
+unsigned long ltq_grx390_pp32_hz(void)
+{
+ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+ unsigned long clk;
+
+ switch (clksys) {
+ case 1:
+ clk = CLOCK_250M;
+ break;
+ case 2:
+ clk = CLOCK_432M;
+ break;
+ case 4:
+ clk = CLOCK_400M;
+ break;
+ default:
+ clk = CLOCK_250M;
+ break;
+ }
+ return clk;
+}
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
*/
#include <linux/export.h>
#define SOC_TWINPASS "Twinpass"
#define SOC_AMAZON_SE "Amazon_SE"
#define SOC_AR9 "AR9"
-#define SOC_GR9 "GR9"
-#define SOC_VR9 "VR9"
+#define SOC_GR9 "GRX200"
+#define SOC_VR9 "xRX200"
+#define SOC_VRX220 "xRX220"
+#define SOC_AR10 "xRX300"
+#define SOC_GRX390 "xRX330"
#define COMP_DANUBE "lantiq,danube"
#define COMP_TWINPASS "lantiq,twinpass"
#define COMP_AR9 "lantiq,ar9"
#define COMP_GR9 "lantiq,gr9"
#define COMP_VR9 "lantiq,vr9"
+#define COMP_AR10 "lantiq,ar10"
+#define COMP_GRX390 "lantiq,grx390"
#define PART_SHIFT 12
#define PART_MASK 0x0FFFFFFF
i->compatible = COMP_VR9;
break;
+ case SOC_ID_VRX220:
+ i->name = SOC_VRX220;
+ i->type = SOC_TYPE_VRX220;
+ i->compatible = COMP_VR9;
+ break;
+
case SOC_ID_GRX282_2:
case SOC_ID_GRX288_2:
i->name = SOC_GR9;
i->compatible = COMP_GR9;
break;
+ case SOC_ID_ARX362:
+ case SOC_ID_ARX368:
+ case SOC_ID_ARX382:
+ case SOC_ID_ARX388:
+ case SOC_ID_URX388:
+ i->name = SOC_AR10;
+ i->type = SOC_TYPE_AR10;
+ i->compatible = COMP_AR10;
+ break;
+
+ case SOC_ID_GRX383:
+ case SOC_ID_GRX369:
+ case SOC_ID_GRX387:
+ case SOC_ID_GRX389:
+ i->name = SOC_GRX390;
+ i->type = SOC_TYPE_GRX390;
+ i->compatible = COMP_GRX390;
+ break;
+
default:
unreachable();
break;
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
*/
#include <linux/init.h>
#include "../prom.h"
-#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
-#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
-
/* reset request register */
#define RCU_RST_REQ 0x0010
/* reset status register */
/* vr9 gphy registers */
#define RCU_GFS_ADD0_XRX200 0x0020
#define RCU_GFS_ADD1_XRX200 0x0068
+/* xRX300 gphy registers */
+#define RCU_GFS_ADD0_XRX300 0x0020
+#define RCU_GFS_ADD1_XRX300 0x0058
+#define RCU_GFS_ADD2_XRX300 0x00AC
+/* xRX330 gphy registers */
+#define RCU_GFS_ADD0_XRX330 0x0020
+#define RCU_GFS_ADD1_XRX330 0x0058
+#define RCU_GFS_ADD2_XRX330 0x00AC
+#define RCU_GFS_ADD3_XRX330 0x0264
/* reboot bit */
#define RCU_RD_GPHY0_XRX200 BIT(31)
#define RCU_RD_SRST BIT(30)
#define RCU_RD_GPHY1_XRX200 BIT(29)
+/* xRX300 bits */
+#define RCU_RD_GPHY0_XRX300 BIT(31)
+#define RCU_RD_GPHY1_XRX300 BIT(29)
+#define RCU_RD_GPHY2_XRX300 BIT(28)
+/* xRX330 bits */
+#define RCU_RD_GPHY0_XRX330 BIT(31)
+#define RCU_RD_GPHY1_XRX330 BIT(29)
+#define RCU_RD_GPHY2_XRX330 BIT(28)
+#define RCU_RD_GPHY3_XRX330 BIT(10)
/* reset cause */
#define RCU_STAT_SHIFT 26
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
static struct device_node *ltq_rcu_np;
+static DEFINE_SPINLOCK(ltq_rcu_lock);
+
+static void ltq_rcu_w32(uint32_t val, uint32_t reg_off)
+{
+ ltq_w32(val, ltq_rcu_membase + reg_off);
+}
+
+static uint32_t ltq_rcu_r32(uint32_t reg_off)
+{
+ return ltq_r32(ltq_rcu_membase + reg_off);
+}
+
+static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(<q_rcu_lock, flags);
+ ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off);
+ spin_unlock_irqrestore(<q_rcu_lock, flags);
+}
/* This function is used by the watchdog driver */
int ltq_reset_cause(void)
return RCU_BOOT_SEL(val);
}
-/* reset / boot a gphy */
-static struct ltq_xrx200_gphy_reset {
+struct ltq_gphy_reset {
u32 rd;
u32 addr;
-} xrx200_gphy[] = {
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx200_gphy[] = {
{RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
{RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
};
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx300_gphy[] = {
+ {RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300},
+ {RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300},
+ {RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300},
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx330_gphy[] = {
+ {RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330},
+ {RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330},
+ {RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330},
+ {RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330},
+};
+
+static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs,
+ dma_addr_t dev_addr)
+{
+ ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ);
+ ltq_rcu_w32(dev_addr, phy_regs->addr);
+ ltq_rcu_w32_mask(phy_regs->rd, 0, RCU_RST_REQ);
+}
+
/* reset and boot a gphy. these phys only exist on xrx200 SoC */
int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
{
return -EINVAL;
}
- clk = clk_get_sys("1f203000.rcu", "gphy");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- clk_enable(clk);
-
- if (id > 1) {
- dev_err(dev, "%u is an invalid gphy id\n", id);
- return -EINVAL;
+ if (of_machine_is_compatible("lantiq,vr9")) {
+ clk = clk_get_sys("1f203000.rcu", "gphy");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ clk_enable(clk);
}
+
dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
- ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
- RCU_RST_REQ);
- ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
- ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
- RCU_RST_REQ);
+ if (of_machine_is_compatible("lantiq,vr9")) {
+ if (id >= ARRAY_SIZE(xrx200_gphy)) {
+ dev_err(dev, "%u is an invalid gphy id\n", id);
+ return -EINVAL;
+ }
+ xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr);
+ } else if (of_machine_is_compatible("lantiq,ar10")) {
+ if (id >= ARRAY_SIZE(xrx300_gphy)) {
+ dev_err(dev, "%u is an invalid gphy id\n", id);
+ return -EINVAL;
+ }
+ xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr);
+ } else if (of_machine_is_compatible("lantiq,grx390")) {
+ if (id >= ARRAY_SIZE(xrx330_gphy)) {
+ dev_err(dev, "%u is an invalid gphy id\n", id);
+ return -EINVAL;
+ }
+ xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr);
+ }
return 0;
}
if (of_address_to_resource(ltq_rcu_np, 0, &res))
panic("Failed to get rcu memory range");
- if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
+ if (!request_mem_region(res.start, resource_size(&res), res.name))
pr_err("Failed to request rcu memory");
ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
* by the Free Software Foundation.
*
* Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
*/
#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/clkdev.h>
+#include <linux/spinlock.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include "../clk.h"
#include "../prom.h"
-/* clock control register */
+/* clock control register for legacy */
#define CGU_IFCCR 0x0018
#define CGU_IFCCR_VR9 0x0024
-/* system clock register */
+/* system clock register for legacy */
#define CGU_SYS 0x0010
/* pci control register */
#define CGU_PCICR 0x0034
#define CGU_PCICR_VR9 0x0038
/* ephy configuration register */
#define CGU_EPHY 0x10
+
+/* Legacy PMU register for ar9, ase, danube */
/* power control register */
#define PMU_PWDCR 0x1C
/* power status register */
/* power status register */
#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
+
+/* PMU register for ar10 and grx390 */
+
+/* First register set */
+#define PMU_CLK_SR 0x20 /* status */
+#define PMU_CLK_CR_A 0x24 /* Enable */
+#define PMU_CLK_CR_B 0x28 /* Disable */
+/* Second register set */
+#define PMU_CLK_SR1 0x30 /* status */
+#define PMU_CLK_CR1_A 0x34 /* Enable */
+#define PMU_CLK_CR1_B 0x38 /* Disable */
+/* Third register set */
+#define PMU_ANA_SR 0x40 /* status */
+#define PMU_ANA_CR_A 0x44 /* Enable */
+#define PMU_ANA_CR_B 0x48 /* Disable */
+
+/* Status */
+static u32 pmu_clk_sr[] = {
+ PMU_CLK_SR,
+ PMU_CLK_SR1,
+ PMU_ANA_SR,
+};
+
+/* Enable */
+static u32 pmu_clk_cr_a[] = {
+ PMU_CLK_CR_A,
+ PMU_CLK_CR1_A,
+ PMU_ANA_CR_A,
+};
+
+/* Disable */
+static u32 pmu_clk_cr_b[] = {
+ PMU_CLK_CR_B,
+ PMU_CLK_CR1_B,
+ PMU_ANA_CR_B,
+};
+
+#define PWDCR_EN_XRX(x) (pmu_clk_cr_a[(x)])
+#define PWDCR_DIS_XRX(x) (pmu_clk_cr_b[(x)])
+#define PWDSR_XRX(x) (pmu_clk_sr[(x)])
+
/* clock gates that we can en/disable */
#define PMU_USB0_P BIT(0)
+#define PMU_ASE_SDIO BIT(2) /* ASE special */
#define PMU_PCI BIT(4)
#define PMU_DMA BIT(5)
#define PMU_USB0 BIT(6)
#define PMU_ASC0 BIT(7)
#define PMU_EPHY BIT(7) /* ase */
+#define PMU_USIF BIT(7) /* from vr9 until grx390 */
#define PMU_SPI BIT(8)
#define PMU_DFE BIT(9)
#define PMU_EBU BIT(10)
#define PMU_AHBS BIT(13) /* vr9 */
#define PMU_FPI BIT(14)
#define PMU_AHBM BIT(15)
+#define PMU_SDIO BIT(16) /* danube, ar9, vr9 */
#define PMU_ASC1 BIT(17)
#define PMU_PPE_QSB BIT(18)
#define PMU_PPE_SLL01 BIT(19)
+#define PMU_DEU BIT(20)
#define PMU_PPE_TC BIT(21)
#define PMU_PPE_EMA BIT(22)
#define PMU_PPE_DPLUM BIT(23)
+#define PMU_PPE_DP BIT(23)
#define PMU_PPE_DPLUS BIT(24)
#define PMU_USB1_P BIT(26)
#define PMU_USB1 BIT(27)
#define PMU_GPHY BIT(30)
#define PMU_PCIE_CLK BIT(31)
-#define PMU1_PCIE_PHY BIT(0)
+#define PMU1_PCIE_PHY BIT(0) /* vr9-specific,moved in ar10/grx390 */
#define PMU1_PCIE_CTL BIT(1)
#define PMU1_PCIE_PDI BIT(4)
#define PMU1_PCIE_MSI BIT(5)
+#define PMU1_CKE BIT(6)
+#define PMU1_PCIE1_CTL BIT(17)
+#define PMU1_PCIE1_PDI BIT(20)
+#define PMU1_PCIE1_MSI BIT(21)
+#define PMU1_PCIE2_CTL BIT(25)
+#define PMU1_PCIE2_PDI BIT(26)
+#define PMU1_PCIE2_MSI BIT(27)
+
+#define PMU_ANALOG_USB0_P BIT(0)
+#define PMU_ANALOG_USB1_P BIT(1)
+#define PMU_ANALOG_PCIE0_P BIT(8)
+#define PMU_ANALOG_PCIE1_P BIT(9)
+#define PMU_ANALOG_PCIE2_P BIT(10)
+#define PMU_ANALOG_DSL_AFE BIT(16)
+#define PMU_ANALOG_DCDC_2V5 BIT(17)
+#define PMU_ANALOG_DCDC_1VX BIT(18)
+#define PMU_ANALOG_DCDC_1V0 BIT(19)
#define pmu_w32(x, y) ltq_w32((x), pmu_membase + (y))
#define pmu_r32(x) ltq_r32(pmu_membase + (x))
static u32 ifccr = CGU_IFCCR;
static u32 pcicr = CGU_PCICR;
+static DEFINE_SPINLOCK(g_pmu_lock);
+
/* legacy function kept alive to ease clkdev transition */
void ltq_pmu_enable(unsigned int module)
{
- int err = 1000000;
+ int retry = 1000000;
+ spin_lock(&g_pmu_lock);
pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR);
- do {} while (--err && (pmu_r32(PMU_PWDSR) & module));
+ do {} while (--retry && (pmu_r32(PMU_PWDSR) & module));
+ spin_unlock(&g_pmu_lock);
- if (!err)
+ if (!retry)
panic("activating PMU module failed!");
}
EXPORT_SYMBOL(ltq_pmu_enable);
/* legacy function kept alive to ease clkdev transition */
void ltq_pmu_disable(unsigned int module)
{
+ int retry = 1000000;
+
+ spin_lock(&g_pmu_lock);
pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR);
+ do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module)));
+ spin_unlock(&g_pmu_lock);
+
+ if (!retry)
+ pr_warn("deactivating PMU module failed!");
}
EXPORT_SYMBOL(ltq_pmu_disable);
{
int retry = 1000000;
- pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
- PWDCR(clk->module));
- do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
+ if (of_machine_is_compatible("lantiq,ar10")
+ || of_machine_is_compatible("lantiq,grx390")) {
+ pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module));
+ do {} while (--retry &&
+ (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)));
+
+ } else {
+ spin_lock(&g_pmu_lock);
+ pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
+ PWDCR(clk->module));
+ do {} while (--retry &&
+ (pmu_r32(PWDSR(clk->module)) & clk->bits));
+ spin_unlock(&g_pmu_lock);
+ }
if (!retry)
panic("activating PMU module failed!");
/* disable a clock gate */
static void pmu_disable(struct clk *clk)
{
- pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
- PWDCR(clk->module));
+ int retry = 1000000;
+
+ if (of_machine_is_compatible("lantiq,ar10")
+ || of_machine_is_compatible("lantiq,grx390")) {
+ pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module));
+ do {} while (--retry &&
+ (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits));
+ } else {
+ spin_lock(&g_pmu_lock);
+ pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
+ PWDCR(clk->module));
+ do {} while (--retry &&
+ (!(pmu_r32(PWDSR(clk->module)) & clk->bits)));
+ spin_unlock(&g_pmu_lock);
+ }
+
+ if (!retry)
+ pr_warn("deactivating PMU module failed!");
}
/* the pci enable helper */
}
/* manage the clock gates via PMU */
-static void clkdev_add_pmu(const char *dev, const char *con,
- unsigned int module, unsigned int bits)
+static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate,
+ unsigned int module, unsigned int bits)
{
struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
clk->disable = pmu_disable;
clk->module = module;
clk->bits = bits;
+ if (deactivate) {
+ /*
+ * Disable it during the initialization. Module should enable
+ * when used
+ */
+ pmu_disable(clk);
+ }
clkdev_add(&clk->cl);
}
of_address_to_resource(np_ebu, 0, &res_ebu))
panic("Failed to get core resources");
- if ((request_mem_region(res_pmu.start, resource_size(&res_pmu),
- res_pmu.name) < 0) ||
- (request_mem_region(res_cgu.start, resource_size(&res_cgu),
- res_cgu.name) < 0) ||
- (request_mem_region(res_ebu.start, resource_size(&res_ebu),
- res_ebu.name) < 0))
+ if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
+ res_pmu.name) ||
+ !request_mem_region(res_cgu.start, resource_size(&res_cgu),
+ res_cgu.name) ||
+ !request_mem_region(res_ebu.start, resource_size(&res_ebu),
+ res_ebu.name))
pr_err("Failed to request core resources");
pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu));
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
/* add our generic xway clocks */
- clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI);
- clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0);
- clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT);
- clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP);
- clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA);
- clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI);
- clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU);
+ clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
+ clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0);
+ clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
+ clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP);
+ clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
+ clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
+ clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU);
clkdev_add_clkout();
/* add the soc dependent clocks */
ifccr = CGU_IFCCR_VR9;
pcicr = CGU_PCICR_VR9;
} else {
- clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE);
+ clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
}
if (!of_machine_is_compatible("lantiq,ase")) {
- clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1);
+ clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
clkdev_add_pci();
}
+ if (of_machine_is_compatible("lantiq,grx390") ||
+ of_machine_is_compatible("lantiq,ar10")) {
+ clkdev_add_pmu("1e101000.usb", "phy", 1, 2, PMU_ANALOG_USB0_P);
+ clkdev_add_pmu("1e106000.usb", "phy", 1, 2, PMU_ANALOG_USB1_P);
+ /* rc 0 */
+ clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
+ clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+ clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+ clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+ /* rc 1 */
+ clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
+ clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
+ clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI);
+ clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
+ }
+
if (of_machine_is_compatible("lantiq,ase")) {
if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
clkdev_add_static(CLOCK_266M, CLOCK_133M,
else
clkdev_add_static(CLOCK_133M, CLOCK_133M,
CLOCK_133M, CLOCK_133M);
- clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
- clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+ clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
+ clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
+ clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+ clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+ } else if (of_machine_is_compatible("lantiq,grx390")) {
+ clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
+ ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+ /* rc 2 */
+ clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
+ clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
+ clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+ clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
+ clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP);
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ } else if (of_machine_is_compatible("lantiq,ar10")) {
+ clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(),
+ ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+ clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH |
+ PMU_PPE_DP | PMU_PPE_TC);
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+ clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
} else if (of_machine_is_compatible("lantiq,vr9")) {
clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
- clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
- clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
- clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
- clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI);
- clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL);
- clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
- clkdev_add_pmu("1e108000.eth", NULL, 0,
+ clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0 | PMU_AHBM);
+ clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+ clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1 | PMU_AHBM);
+ clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY);
+ clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
+ clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+ clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+ clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+ clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
+
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+ clkdev_add_pmu("1e108000.eth", NULL, 1, 0,
PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
PMU_PPE_QSB | PMU_PPE_TOP);
- clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
+ clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+ clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
} else if (of_machine_is_compatible("lantiq,ar9")) {
clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
ltq_ar9_fpi_hz(), CLOCK_250M);
- clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+ clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+ clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+ clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+ clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+ clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
} else {
clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
+ clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+ clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+ clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
}
}
obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o
# libgcc-style stuff needed in the kernel
-obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
+obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o ucmpdi2.o
--- /dev/null
+#include <linux/module.h>
+
+unsigned long long __bswapdi2(unsigned long long u)
+{
+ return (((u) & 0xff00000000000000ull) >> 56) |
+ (((u) & 0x00ff000000000000ull) >> 40) |
+ (((u) & 0x0000ff0000000000ull) >> 24) |
+ (((u) & 0x000000ff00000000ull) >> 8) |
+ (((u) & 0x00000000ff000000ull) << 8) |
+ (((u) & 0x0000000000ff0000ull) << 24) |
+ (((u) & 0x000000000000ff00ull) << 40) |
+ (((u) & 0x00000000000000ffull) << 56);
+}
+
+EXPORT_SYMBOL(__bswapdi2);
--- /dev/null
+#include <linux/module.h>
+
+unsigned int __bswapsi2(unsigned int u)
+{
+ return (((u) & 0xff000000) >> 24) |
+ (((u) & 0x00ff0000) >> 8) |
+ (((u) & 0x0000ff00) << 8) |
+ (((u) & 0x000000ff) << 24);
+}
+
+EXPORT_SYMBOL(__bswapsi2);
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/types.h>
+#include <asm/debug.h>
#include <asm/fpu_emulator.h>
#include <asm/local.h>
}
DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n");
-extern struct dentry *mips_debugfs_dir;
static int __init debugfs_fpuemu(void)
{
struct dentry *d, *dir;
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
+obj-$(CONFIG_SCACHE_DEBUGFS) += sc-debugfs.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bcache.h>
+#include <asm/debug.h>
+#include <asm/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/init.h>
+
+static ssize_t sc_prefetch_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ bool enabled = bc_prefetch_is_enabled();
+ char buf[3];
+
+ buf[0] = enabled ? 'Y' : 'N';
+ buf[1] = '\n';
+ buf[2] = 0;
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t sc_prefetch_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char buf[32];
+ ssize_t buf_size;
+ bool enabled;
+ int err;
+
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ buf[buf_size] = '\0';
+ err = strtobool(buf, &enabled);
+ if (err)
+ return err;
+
+ if (enabled)
+ bc_prefetch_enable();
+ else
+ bc_prefetch_disable();
+
+ return count;
+}
+
+static const struct file_operations sc_prefetch_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = sc_prefetch_read,
+ .write = sc_prefetch_write,
+};
+
+static int __init sc_debugfs_init(void)
+{
+ struct dentry *dir, *file;
+
+ if (!mips_debugfs_dir)
+ return -ENODEV;
+
+ dir = debugfs_create_dir("l2cache", mips_debugfs_dir);
+ if (IS_ERR(dir))
+ return PTR_ERR(dir);
+
+ file = debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir,
+ NULL, &sc_prefetch_fops);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
+
+ return 0;
+}
+late_initcall(sc_debugfs_init);
/* L2 cache is permanently enabled */
}
+static void mips_sc_prefetch_enable(void)
+{
+ unsigned long pftctl;
+
+ if (mips_cm_revision() < CM_REV_CM2_5)
+ return;
+
+ /*
+ * If there is one or more L2 prefetch unit present then enable
+ * prefetching for both code & data, for all ports.
+ */
+ pftctl = read_gcr_l2_pft_control();
+ if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) {
+ pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+ pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+ pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+ write_gcr_l2_pft_control(pftctl);
+
+ pftctl = read_gcr_l2_pft_control_b();
+ pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+ pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+ write_gcr_l2_pft_control_b(pftctl);
+ }
+}
+
+static void mips_sc_prefetch_disable(void)
+{
+ unsigned long pftctl;
+
+ if (mips_cm_revision() < CM_REV_CM2_5)
+ return;
+
+ pftctl = read_gcr_l2_pft_control();
+ pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+ write_gcr_l2_pft_control(pftctl);
+
+ pftctl = read_gcr_l2_pft_control_b();
+ pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+ pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+ write_gcr_l2_pft_control_b(pftctl);
+}
+
+static bool mips_sc_prefetch_is_enabled(void)
+{
+ unsigned long pftctl;
+
+ if (mips_cm_revision() < CM_REV_CM2_5)
+ return false;
+
+ pftctl = read_gcr_l2_pft_control();
+ if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK))
+ return false;
+ return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK);
+}
+
static struct bcache_ops mips_sc_ops = {
.bc_enable = mips_sc_enable,
.bc_disable = mips_sc_disable,
.bc_wback_inv = mips_sc_wback_inv,
- .bc_inv = mips_sc_inv
+ .bc_inv = mips_sc_inv,
+ .bc_prefetch_enable = mips_sc_prefetch_enable,
+ .bc_prefetch_disable = mips_sc_prefetch_disable,
+ .bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
};
/*
return 0;
tmp = (config2 >> 8) & 0x0f;
- if (0 <= tmp && tmp <= 7)
+ if (tmp <= 7)
c->scache.sets = 64 << tmp;
else
return 0;
tmp = (config2 >> 0) & 0x0f;
- if (0 <= tmp && tmp <= 7)
+ if (tmp <= 7)
c->scache.ways = tmp + 1;
else
return 0;
int found = mips_sc_probe();
if (found) {
mips_sc_enable();
+ mips_sc_prefetch_enable();
bcops = &mips_sc_ops;
}
return found;
static struct uasm_reloc relocs[128];
static int check_for_high_segbits;
+static bool fill_includes_sw_bits;
static unsigned int kscratch_used_mask;
static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
unsigned int reg)
{
- if (cpu_has_rixi) {
- UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+ if (cpu_has_rixi && _PAGE_NO_EXEC) {
+ if (fill_includes_sw_bits) {
+ UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+ } else {
+ UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC));
+ UASM_i_ROTR(p, reg, reg,
+ ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ }
} else {
#ifdef CONFIG_PHYS_ADDR_T_64BIT
uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
* 64bit address support (36bit on a 32bit CPU) in a 32bit
* Kernel is a special case. Only a few CPUs use it.
*/
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
- if (cpu_has_64bits) {
- uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
- uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
- if (cpu_has_rixi) {
- UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
- UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
- } else {
- uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
- UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
- }
- UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
- } else {
+ if (config_enabled(CONFIG_PHYS_ADDR_T_64BIT) && !cpu_has_64bits) {
int pte_off_even = sizeof(pte_t) / 2;
int pte_off_odd = pte_off_even + sizeof(pte_t);
#ifdef CONFIG_XPA
uasm_i_mthc0(p, tmp, C0_ENTRYLO0);
uasm_i_mthc0(p, ptep, C0_ENTRYLO1);
#endif
+ return;
}
-#else
+
UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
if (r45k_bvahwbug())
build_tlb_probe_entry(p);
- if (cpu_has_rixi) {
- UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
- if (r4k_250MHZhwbug())
- UASM_i_MTC0(p, 0, C0_ENTRYLO0);
- UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
- } else {
- UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
- if (r4k_250MHZhwbug())
- UASM_i_MTC0(p, 0, C0_ENTRYLO0);
- UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
- if (r45k_bvahwbug())
- uasm_i_mfc0(p, tmp, C0_INDEX);
- }
+ build_convert_pte_to_entrylo(p, tmp);
+ if (r4k_250MHZhwbug())
+ UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+ build_convert_pte_to_entrylo(p, ptep);
+ if (r45k_bvahwbug())
+ uasm_i_mfc0(p, tmp, C0_INDEX);
if (r4k_250MHZhwbug())
UASM_i_MTC0(p, 0, C0_ENTRYLO1);
UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
-#endif
}
struct mips_huge_tlb_info {
/* re-initialize the PTI field including the even/odd bit */
pwfield &= ~MIPS_PWFIELD_PTI_MASK;
pwfield |= PAGE_SHIFT << MIPS_PWFIELD_PTI_SHIFT;
+ if (CONFIG_PGTABLE_LEVELS >= 3) {
+ pwfield &= ~MIPS_PWFIELD_MDI_MASK;
+ pwfield |= PMD_SHIFT << MIPS_PWFIELD_MDI_SHIFT;
+ }
/* Set the PTEI right shift */
ptei = _PAGE_GLOBAL_SHIFT << MIPS_PWFIELD_PTEI_SHIFT;
pwfield |= ptei;
pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT;
pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT;
+ if (CONFIG_PGTABLE_LEVELS >= 3)
+ pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT;
/* If XPA has been enabled, PTEs are 64-bit in size. */
- if (read_c0_pagegrain() & PG_ELPA)
+ if (config_enabled(CONFIG_64BITS) || (read_c0_pagegrain() & PG_ELPA))
pwsize |= 1;
write_c0_pwsize(pwsize);
#endif
}
+static void check_pabits(void)
+{
+ unsigned long entry;
+ unsigned pabits, fillbits;
+
+ if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
+ /*
+ * We'll only be making use of the fact that we can rotate bits
+ * into the fill if the CPU supports RIXI, so don't bother
+ * probing this for CPUs which don't.
+ */
+ return;
+ }
+
+ write_c0_entrylo0(~0ul);
+ back_to_back_c0_hazard();
+ entry = read_c0_entrylo0();
+
+ /* clear all non-PFN bits */
+ entry &= ~((1 << MIPS_ENTRYLO_PFN_SHIFT) - 1);
+ entry &= ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+
+ /* find a lower bound on PABITS, and upper bound on fill bits */
+ pabits = fls_long(entry) + 6;
+ fillbits = max_t(int, (int)BITS_PER_LONG - pabits, 0);
+
+ /* minus the RI & XI bits */
+ fillbits -= min_t(unsigned, fillbits, 2);
+
+ if (fillbits >= ilog2(_PAGE_NO_EXEC))
+ fill_includes_sw_bits = true;
+
+ pr_debug("Entry* registers contain %u fill bits\n", fillbits);
+}
+
void build_tlb_refill_handler(void)
{
/*
static int run_once = 0;
output_pgtable_bits_defines();
+ check_pabits();
#ifdef CONFIG_64BIT
check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
# Copyright (C) 2008 Wind River Systems, Inc.
# written by Ralf Baechle <ralf@linux-mips.org>
#
-obj-y := malta-display.o malta-dt.o malta-init.o \
- malta-int.o malta-memory.o malta-platform.o \
- malta-reset.o malta-setup.o malta-time.o
+obj-y += malta-display.o
+obj-y += malta-dt.o
+obj-y += malta-dtshim.o
+obj-y += malta-init.o
+obj-y += malta-int.o
+obj-y += malta-memory.o
+obj-y += malta-platform.o
+obj-y += malta-reset.o
+obj-y += malta-setup.o
+obj-y += malta-time.o
obj-$(CONFIG_MIPS_CMP) += malta-amon.o
obj-$(CONFIG_MIPS_MALTA_PM) += malta-pm.o
+
+CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+#include <linux/sizes.h>
+#include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
+#include <asm/page.h>
+
+static unsigned char fdt_buf[16 << 10] __initdata;
+
+/* determined physical memory size, not overridden by command line args */
+extern unsigned long physical_memsize;
+
+#define MAX_MEM_ARRAY_ENTRIES 1
+
+static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
+{
+ unsigned long size_preio;
+ unsigned entries;
+
+ entries = 1;
+ mem_array[0] = cpu_to_be32(PHYS_OFFSET);
+ if (config_enabled(CONFIG_EVA)) {
+ /*
+ * The current Malta EVA configuration is "special" in that it
+ * always makes use of addresses in the upper half of the 32 bit
+ * physical address map, which gives it a contiguous region of
+ * DDR but limits it to 2GB.
+ */
+ mem_array[1] = cpu_to_be32(size);
+ } else {
+ size_preio = min_t(unsigned long, size, SZ_256M);
+ mem_array[1] = cpu_to_be32(size_preio);
+ }
+
+ BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES);
+ return entries;
+}
+
+static void __init append_memory(void *fdt, int root_off)
+{
+ __be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
+ unsigned long memsize;
+ unsigned mem_entries;
+ int i, err, mem_off;
+ char *var, param_name[10], *var_names[] = {
+ "ememsize", "memsize",
+ };
+
+ /* if a memory node already exists, leave it alone */
+ mem_off = fdt_path_offset(fdt, "/memory");
+ if (mem_off >= 0)
+ return;
+
+ /* find memory size from the bootloader environment */
+ for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+ var = fw_getenv(var_names[i]);
+ if (!var)
+ continue;
+
+ err = kstrtoul(var, 0, &physical_memsize);
+ if (!err)
+ break;
+
+ pr_warn("Failed to read the '%s' env variable '%s'\n",
+ var_names[i], var);
+ }
+
+ if (!physical_memsize) {
+ pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+ physical_memsize = 32 << 20;
+ }
+
+ if (config_enabled(CONFIG_CPU_BIG_ENDIAN)) {
+ /*
+ * SOC-it swaps, or perhaps doesn't swap, when DMA'ing
+ * the last word of physical memory.
+ */
+ physical_memsize -= PAGE_SIZE;
+ }
+
+ /* default to using all available RAM */
+ memsize = physical_memsize;
+
+ /* allow the user to override the usable memory */
+ for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+ snprintf(param_name, sizeof(param_name), "%s=", var_names[i]);
+ var = strstr(arcs_cmdline, param_name);
+ if (!var)
+ continue;
+
+ memsize = memparse(var + strlen(param_name), NULL);
+ }
+
+ /* if the user says there's more RAM than we thought, believe them */
+ physical_memsize = max_t(unsigned long, physical_memsize, memsize);
+
+ /* append memory to the DT */
+ mem_off = fdt_add_subnode(fdt, root_off, "memory");
+ if (mem_off < 0)
+ panic("Unable to add memory node to DT: %d", mem_off);
+
+ err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+ if (err)
+ panic("Unable to set memory node device_type: %d", err);
+
+ mem_entries = gen_fdt_mem_array(mem_array, physical_memsize);
+ err = fdt_setprop(fdt, mem_off, "reg", mem_array,
+ mem_entries * 2 * sizeof(mem_array[0]));
+ if (err)
+ panic("Unable to set memory regs property: %d", err);
+
+ mem_entries = gen_fdt_mem_array(mem_array, memsize);
+ err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array,
+ mem_entries * 2 * sizeof(mem_array[0]));
+ if (err)
+ panic("Unable to set linux,usable-memory property: %d", err);
+}
+
+void __init *malta_dt_shim(void *fdt)
+{
+ int root_off, len, err;
+ const char *compat;
+
+ if (fdt_check_header(fdt))
+ panic("Corrupt DT");
+
+ err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+ if (err)
+ panic("Unable to open FDT: %d", err);
+
+ root_off = fdt_path_offset(fdt_buf, "/");
+ if (root_off < 0)
+ panic("No / node in DT");
+
+ compat = fdt_getprop(fdt_buf, root_off, "compatible", &len);
+ if (!compat)
+ panic("No root compatible property in DT: %d", len);
+
+ /* if this isn't Malta, leave the DT alone */
+ if (strncmp(compat, "mti,malta", len))
+ return fdt;
+
+ append_memory(fdt_buf, root_off);
+
+ err = fdt_pack(fdt_buf);
+ if (err)
+ panic("Unable to pack FDT: %d\n", err);
+
+ return fdt_buf;
+}
return;
if (!register_vsmp_smp_ops())
return;
+ register_up_smp_ops();
}
void platform_early_l2_init(void)
#include <asm/sections.h>
#include <asm/fw/fw.h>
-static fw_memblock_t mdesc[FW_MAX_MEMBLOCKS];
-
/* determined physical memory size, not overridden by command line args */
unsigned long physical_memsize = 0L;
-fw_memblock_t * __init fw_getmdesc(int eva)
-{
- char *memsize_str, *ememsize_str = NULL, *ptr;
- unsigned long memsize = 0, ememsize = 0;
- static char cmdline[COMMAND_LINE_SIZE] __initdata;
- int tmp;
-
- /* otherwise look in the environment */
-
- memsize_str = fw_getenv("memsize");
- if (memsize_str) {
- tmp = kstrtoul(memsize_str, 0, &memsize);
- if (tmp)
- pr_warn("Failed to read the 'memsize' env variable.\n");
- }
- if (eva) {
- /* Look for ememsize for EVA */
- ememsize_str = fw_getenv("ememsize");
- if (ememsize_str) {
- tmp = kstrtoul(ememsize_str, 0, &ememsize);
- if (tmp)
- pr_warn("Failed to read the 'ememsize' env variable.\n");
- }
- }
- if (!memsize && !ememsize) {
- pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
- physical_memsize = 0x02000000;
- } else {
- if (memsize > (256 << 20)) { /* memsize should be capped to 256M */
- pr_warn("Unsupported memsize value (0x%lx) detected! "
- "Using 0x10000000 (256M) instead\n",
- memsize);
- memsize = 256 << 20;
- }
- /* If ememsize is set, then set physical_memsize to that */
- physical_memsize = ememsize ? : memsize;
- }
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
- /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
- word of physical memory */
- physical_memsize -= PAGE_SIZE;
-#endif
-
- /* Check the command line for a memsize directive that overrides
- the physical/default amount */
- strcpy(cmdline, arcs_cmdline);
- ptr = strstr(cmdline, "memsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " memsize=");
- /* And now look for ememsize */
- if (eva) {
- ptr = strstr(cmdline, "ememsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " ememsize=");
- }
-
- if (ptr)
- memsize = memparse(ptr + 8 + (eva ? 1 : 0), &ptr);
- else
- memsize = physical_memsize;
-
- /* Last 64K for HIGHMEM arithmetics */
- if (memsize > 0x7fff0000)
- memsize = 0x7fff0000;
-
- memset(mdesc, 0, sizeof(mdesc));
-
- mdesc[0].type = fw_dontuse;
- mdesc[0].base = PHYS_OFFSET;
- mdesc[0].size = 0x00001000;
-
- mdesc[1].type = fw_code;
- mdesc[1].base = mdesc[0].base + 0x00001000UL;
- mdesc[1].size = 0x000ef000;
-
- /*
- * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
- * south bridge and PCI access always forwarded to the ISA Bus and
- * BIOSCS# is always generated.
- * This mean that this area can't be used as DMA memory for PCI
- * devices.
- */
- mdesc[2].type = fw_dontuse;
- mdesc[2].base = mdesc[0].base + 0x000f0000UL;
- mdesc[2].size = 0x00010000;
-
- mdesc[3].type = fw_dontuse;
- mdesc[3].base = mdesc[0].base + 0x00100000UL;
- mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) -
- 0x00100000UL;
-
- mdesc[4].type = fw_free;
- mdesc[4].base = mdesc[0].base + CPHYSADDR(PFN_ALIGN(&_end));
- mdesc[4].size = memsize - CPHYSADDR(mdesc[4].base);
-
- return &mdesc[0];
-}
-
static void free_init_pages_eva_malta(void *begin, void *end)
{
free_init_pages("unused kernel", __pa_symbol((unsigned long *)begin),
__pa_symbol((unsigned long *)end));
}
-static int __init fw_memtype_classify(unsigned int type)
-{
- switch (type) {
- case fw_free:
- return BOOT_MEM_RAM;
- case fw_code:
- return BOOT_MEM_ROM_DATA;
- default:
- return BOOT_MEM_RESERVED;
- }
-}
-
void __init fw_meminit(void)
{
- fw_memblock_t *p;
-
- p = fw_getmdesc(config_enabled(CONFIG_EVA));
- free_init_pages_eva = (config_enabled(CONFIG_EVA) ?
- free_init_pages_eva_malta : NULL);
+ bool eva = config_enabled(CONFIG_EVA);
- while (p->size) {
- long type;
- unsigned long base, size;
-
- type = fw_memtype_classify(p->type);
- base = p->base;
- size = p->size;
-
- add_memory_region(base, size, type);
- p++;
- }
+ free_init_pages_eva = eva ? free_init_pages_eva_malta : NULL;
}
void __init prom_free_prom_memory(void)
#include <linux/time.h>
#include <asm/fw/fw.h>
+#include <asm/mach-malta/malta-dtshim.h>
#include <asm/mips-cm.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/malta.h>
void __init plat_mem_setup(void)
{
unsigned int i;
+ void *fdt = __dtb_start;
- __dt_setup_arch(__dtb_start);
+ fdt = malta_dt_shim(fdt);
+ __dt_setup_arch(fdt);
if (config_enabled(CONFIG_EVA))
/* EVA has already been configured in mach-malta/kernel-init.h */
/* find the interrupt controller child node */
for_each_child_of_node(np, child) {
- if (of_get_property(child, "interrupt-controller", NULL) &&
- of_node_get(child)) {
+ if (of_get_property(child, "interrupt-controller", NULL)) {
rpc->intc_of_node = child;
break;
}
/* find the PCI host bridge child node */
for_each_child_of_node(np, child) {
if (child->type &&
- of_node_cmp(child->type, "pci") == 0 &&
- of_node_get(child)) {
+ of_node_cmp(child->type, "pci") == 0) {
rpc->pci_controller.of_node = child;
break;
}
--- /dev/null
+*.so*
+vdso-*image.c
+genvdso
+vdso*.lds
--- /dev/null
+# Objects to go into the VDSO.
+obj-vdso-y := elf.o gettimeofday.o sigreturn.o
+
+# Common compiler flags between ABIs.
+ccflags-vdso := \
+ $(filter -I%,$(KBUILD_CFLAGS)) \
+ $(filter -E%,$(KBUILD_CFLAGS)) \
+ $(filter -march=%,$(KBUILD_CFLAGS))
+cflags-vdso := $(ccflags-vdso) \
+ $(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
+ -O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \
+ $(call cc-option, -fno-stack-protector)
+aflags-vdso := $(ccflags-vdso) \
+ $(filter -I%,$(KBUILD_CFLAGS)) \
+ $(filter -E%,$(KBUILD_CFLAGS)) \
+ -D__ASSEMBLY__ -Wa,-gdwarf-2
+
+#
+# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
+# the base address of VDSO, the linker will emit a R_MIPS_PC32
+# relocation in binutils > 2.25 but it will fail with older versions
+# because that relocation is not supported for that symbol. As a result
+# of which we are forced to disable the VDSO symbols when building
+# with < 2.25 binutils on pre-R6 kernels. For more references on why we
+# can't use other methods to get the base address of VDSO please refer to
+# the comments on that file.
+#
+ifndef CONFIG_CPU_MIPSR6
+ ifeq ($(call ld-ifversion, -gt, 22400000, y),)
+ $(warning MIPS VDSO requires binutils > 2.24)
+ obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
+ ccflags-vdso += -DDISABLE_MIPS_VDSO
+ endif
+endif
+
+# VDSO linker flags.
+VDSO_LDFLAGS := \
+ -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \
+ -nostdlib -shared \
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \
+ $(call cc-ldoption, -Wl$(comma)--build-id)
+
+GCOV_PROFILE := n
+
+#
+# Shared build commands.
+#
+
+quiet_cmd_vdsold = VDSO $@
+ cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
+ -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
+
+hostprogs-y := genvdso
+
+quiet_cmd_genvdso = GENVDSO $@
+define cmd_genvdso
+ cp $< $(<:%.dbg=%) && \
+ $(OBJCOPY) -S $< $(<:%.dbg=%) && \
+ $(obj)/genvdso $< $(<:%.dbg=%) $@ $(VDSO_NAME)
+endef
+
+#
+# Build native VDSO.
+#
+
+native-abi := $(filter -mabi=%,$(KBUILD_CFLAGS))
+
+targets += $(obj-vdso-y)
+targets += vdso.lds vdso.so.dbg vdso.so vdso-image.c
+
+obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o)
+
+$(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi)
+$(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
+
+$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
+
+$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
+ $(call if_changed,vdsold)
+
+$(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE
+ $(call if_changed,genvdso)
+
+obj-y += vdso-image.o
+
+#
+# Build O32 VDSO.
+#
+
+# Define these outside the ifdef to ensure they are picked up by clean.
+targets += $(obj-vdso-y:%.o=%-o32.o)
+targets += vdso-o32.lds vdso-o32.so.dbg vdso-o32.so vdso-o32-image.c
+
+ifdef CONFIG_MIPS32_O32
+
+obj-vdso-o32 := $(obj-vdso-y:%.o=$(obj)/%-o32.o)
+
+$(obj-vdso-o32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=32
+$(obj-vdso-o32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=32
+
+$(obj)/%-o32.o: $(src)/%.S FORCE
+ $(call if_changed_dep,as_o_S)
+
+$(obj)/%-o32.o: $(src)/%.c FORCE
+ $(call cmd,force_checksrc)
+ $(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
+$(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
+ $(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE
+ $(call if_changed,vdsold)
+
+$(obj)/vdso-o32-image.c: VDSO_NAME := o32
+$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg $(obj)/genvdso FORCE
+ $(call if_changed,genvdso)
+
+obj-y += vdso-o32-image.o
+
+endif
+
+#
+# Build N32 VDSO.
+#
+
+targets += $(obj-vdso-y:%.o=%-n32.o)
+targets += vdso-n32.lds vdso-n32.so.dbg vdso-n32.so vdso-n32-image.c
+
+ifdef CONFIG_MIPS32_N32
+
+obj-vdso-n32 := $(obj-vdso-y:%.o=$(obj)/%-n32.o)
+
+$(obj-vdso-n32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=n32
+$(obj-vdso-n32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=n32
+
+$(obj)/%-n32.o: $(src)/%.S FORCE
+ $(call if_changed_dep,as_o_S)
+
+$(obj)/%-n32.o: $(src)/%.c FORCE
+ $(call cmd,force_checksrc)
+ $(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
+$(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
+ $(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE
+ $(call if_changed,vdsold)
+
+$(obj)/vdso-n32-image.c: VDSO_NAME := n32
+$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg $(obj)/genvdso FORCE
+ $(call if_changed,genvdso)
+
+obj-y += vdso-n32-image.o
+
+endif
+
+# FIXME: Need install rule for debug.
+# Needs to deal with dependency for generation of dbg by cmd_genvdso...
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/elfnote.h>
+#include <linux/version.h>
+
+ELFNOTE_START(Linux, 0, "a")
+ .long LINUX_VERSION_CODE
+ELFNOTE_END
+
+/*
+ * The .MIPS.abiflags section must be defined with the FP ABI flags set
+ * to 'any' to be able to link with both old and new libraries.
+ * Newer toolchains are capable of automatically generating this, but we want
+ * to work with older toolchains as well. Therefore, we define the contents of
+ * this section here (under different names), and then genvdso will patch
+ * it to have the correct name and type.
+ *
+ * We base the .MIPS.abiflags section on preprocessor definitions rather than
+ * CONFIG_* because we need to match the particular ABI we are building the
+ * VDSO for.
+ *
+ * See https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking
+ * for the .MIPS.abiflags section description.
+ */
+
+ .section .mips_abiflags, "a"
+ .align 3
+__mips_abiflags:
+ .hword 0 /* version */
+ .byte __mips /* isa_level */
+
+ /* isa_rev */
+#ifdef __mips_isa_rev
+ .byte __mips_isa_rev
+#else
+ .byte 0
+#endif
+
+ /* gpr_size */
+#ifdef __mips64
+ .byte 2 /* AFL_REG_64 */
+#else
+ .byte 1 /* AFL_REG_32 */
+#endif
+
+ /* cpr1_size */
+#if (defined(__mips_isa_rev) && __mips_isa_rev >= 6) || defined(__mips64)
+ .byte 2 /* AFL_REG_64 */
+#else
+ .byte 1 /* AFL_REG_32 */
+#endif
+
+ .byte 0 /* cpr2_size (AFL_REG_NONE) */
+ .byte 0 /* fp_abi (Val_GNU_MIPS_ABI_FP_ANY) */
+ .word 0 /* isa_ext */
+ .word 0 /* ases */
+ .word 0 /* flags1 */
+ .word 0 /* flags2 */
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * This tool is used to generate the real VDSO images from the raw image. It
+ * first patches up the MIPS ABI flags and GNU attributes sections defined in
+ * elf.S to have the correct name and type. It then generates a C source file
+ * to be compiled into the kernel containing the VDSO image data and a
+ * mips_vdso_image struct for it, including symbol offsets extracted from the
+ * image.
+ *
+ * We need to be passed both a stripped and unstripped VDSO image. The stripped
+ * image is compiled into the kernel, but we must also patch up the unstripped
+ * image's ABI flags sections so that it can be installed and used for
+ * debugging.
+ */
+
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <byteswap.h>
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+/* Define these in case the system elf.h is not new enough to have them. */
+#ifndef SHT_GNU_ATTRIBUTES
+# define SHT_GNU_ATTRIBUTES 0x6ffffff5
+#endif
+#ifndef SHT_MIPS_ABIFLAGS
+# define SHT_MIPS_ABIFLAGS 0x7000002a
+#endif
+
+enum {
+ ABI_O32 = (1 << 0),
+ ABI_N32 = (1 << 1),
+ ABI_N64 = (1 << 2),
+
+ ABI_ALL = ABI_O32 | ABI_N32 | ABI_N64,
+};
+
+/* Symbols the kernel requires offsets for. */
+static struct {
+ const char *name;
+ const char *offset_name;
+ unsigned int abis;
+} vdso_symbols[] = {
+ { "__vdso_sigreturn", "off_sigreturn", ABI_O32 },
+ { "__vdso_rt_sigreturn", "off_rt_sigreturn", ABI_ALL },
+ {}
+};
+
+static const char *program_name;
+static const char *vdso_name;
+static unsigned char elf_class;
+static unsigned int elf_abi;
+static bool need_swap;
+static FILE *out_file;
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+# define HOST_ORDER ELFDATA2LSB
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+# define HOST_ORDER ELFDATA2MSB
+#endif
+
+#define BUILD_SWAP(bits) \
+ static uint##bits##_t swap_uint##bits(uint##bits##_t val) \
+ { \
+ return need_swap ? bswap_##bits(val) : val; \
+ }
+
+BUILD_SWAP(16)
+BUILD_SWAP(32)
+BUILD_SWAP(64)
+
+#define __FUNC(name, bits) name##bits
+#define _FUNC(name, bits) __FUNC(name, bits)
+#define FUNC(name) _FUNC(name, ELF_BITS)
+
+#define __ELF(x, bits) Elf##bits##_##x
+#define _ELF(x, bits) __ELF(x, bits)
+#define ELF(x) _ELF(x, ELF_BITS)
+
+/*
+ * Include genvdso.h twice with ELF_BITS defined differently to get functions
+ * for both ELF32 and ELF64.
+ */
+
+#define ELF_BITS 64
+#include "genvdso.h"
+#undef ELF_BITS
+
+#define ELF_BITS 32
+#include "genvdso.h"
+#undef ELF_BITS
+
+static void *map_vdso(const char *path, size_t *_size)
+{
+ int fd;
+ struct stat stat;
+ void *addr;
+ const Elf32_Ehdr *ehdr;
+
+ fd = open(path, O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+ path, strerror(errno));
+ return NULL;
+ }
+
+ if (fstat(fd, &stat) != 0) {
+ fprintf(stderr, "%s: Failed to stat '%s': %s\n", program_name,
+ path, strerror(errno));
+ return NULL;
+ }
+
+ addr = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+ 0);
+ if (addr == MAP_FAILED) {
+ fprintf(stderr, "%s: Failed to map '%s': %s\n", program_name,
+ path, strerror(errno));
+ return NULL;
+ }
+
+ /* ELF32/64 header formats are the same for the bits we're checking. */
+ ehdr = addr;
+
+ if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0) {
+ fprintf(stderr, "%s: '%s' is not an ELF file\n", program_name,
+ path);
+ return NULL;
+ }
+
+ elf_class = ehdr->e_ident[EI_CLASS];
+ switch (elf_class) {
+ case ELFCLASS32:
+ case ELFCLASS64:
+ break;
+ default:
+ fprintf(stderr, "%s: '%s' has invalid ELF class\n",
+ program_name, path);
+ return NULL;
+ }
+
+ switch (ehdr->e_ident[EI_DATA]) {
+ case ELFDATA2LSB:
+ case ELFDATA2MSB:
+ need_swap = ehdr->e_ident[EI_DATA] != HOST_ORDER;
+ break;
+ default:
+ fprintf(stderr, "%s: '%s' has invalid ELF data order\n",
+ program_name, path);
+ return NULL;
+ }
+
+ if (swap_uint16(ehdr->e_machine) != EM_MIPS) {
+ fprintf(stderr,
+ "%s: '%s' has invalid ELF machine (expected EM_MIPS)\n",
+ program_name, path);
+ return NULL;
+ } else if (swap_uint16(ehdr->e_type) != ET_DYN) {
+ fprintf(stderr,
+ "%s: '%s' has invalid ELF type (expected ET_DYN)\n",
+ program_name, path);
+ return NULL;
+ }
+
+ *_size = stat.st_size;
+ return addr;
+}
+
+static bool patch_vdso(const char *path, void *vdso)
+{
+ if (elf_class == ELFCLASS64)
+ return patch_vdso64(path, vdso);
+ else
+ return patch_vdso32(path, vdso);
+}
+
+static bool get_symbols(const char *path, void *vdso)
+{
+ if (elf_class == ELFCLASS64)
+ return get_symbols64(path, vdso);
+ else
+ return get_symbols32(path, vdso);
+}
+
+int main(int argc, char **argv)
+{
+ const char *dbg_vdso_path, *vdso_path, *out_path;
+ void *dbg_vdso, *vdso;
+ size_t dbg_vdso_size, vdso_size, i;
+
+ program_name = argv[0];
+
+ if (argc < 4 || argc > 5) {
+ fprintf(stderr,
+ "Usage: %s <debug VDSO> <stripped VDSO> <output file> [<name>]\n",
+ program_name);
+ return EXIT_FAILURE;
+ }
+
+ dbg_vdso_path = argv[1];
+ vdso_path = argv[2];
+ out_path = argv[3];
+ vdso_name = (argc > 4) ? argv[4] : "";
+
+ dbg_vdso = map_vdso(dbg_vdso_path, &dbg_vdso_size);
+ if (!dbg_vdso)
+ return EXIT_FAILURE;
+
+ vdso = map_vdso(vdso_path, &vdso_size);
+ if (!vdso)
+ return EXIT_FAILURE;
+
+ /* Patch both the VDSOs' ABI flags sections. */
+ if (!patch_vdso(dbg_vdso_path, dbg_vdso))
+ return EXIT_FAILURE;
+ if (!patch_vdso(vdso_path, vdso))
+ return EXIT_FAILURE;
+
+ if (msync(dbg_vdso, dbg_vdso_size, MS_SYNC) != 0) {
+ fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+ dbg_vdso_path, strerror(errno));
+ return EXIT_FAILURE;
+ } else if (msync(vdso, vdso_size, MS_SYNC) != 0) {
+ fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+ vdso_path, strerror(errno));
+ return EXIT_FAILURE;
+ }
+
+ out_file = fopen(out_path, "w");
+ if (!out_file) {
+ fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+ out_path, strerror(errno));
+ return EXIT_FAILURE;
+ }
+
+ fprintf(out_file, "/* Automatically generated - do not edit */\n");
+ fprintf(out_file, "#include <linux/linkage.h>\n");
+ fprintf(out_file, "#include <linux/mm.h>\n");
+ fprintf(out_file, "#include <asm/vdso.h>\n");
+
+ /* Write out the stripped VDSO data. */
+ fprintf(out_file,
+ "static unsigned char vdso_data[PAGE_ALIGN(%zu)] __page_aligned_data = {\n\t",
+ vdso_size);
+ for (i = 0; i < vdso_size; i++) {
+ if (!(i % 10))
+ fprintf(out_file, "\n\t");
+ fprintf(out_file, "0x%02x, ", ((unsigned char *)vdso)[i]);
+ }
+ fprintf(out_file, "\n};\n");
+
+ /* Preallocate a page array. */
+ fprintf(out_file,
+ "static struct page *vdso_pages[PAGE_ALIGN(%zu) / PAGE_SIZE];\n",
+ vdso_size);
+
+ fprintf(out_file, "struct mips_vdso_image vdso_image%s%s = {\n",
+ (vdso_name[0]) ? "_" : "", vdso_name);
+ fprintf(out_file, "\t.data = vdso_data,\n");
+ fprintf(out_file, "\t.size = PAGE_ALIGN(%zu),\n", vdso_size);
+ fprintf(out_file, "\t.mapping = {\n");
+ fprintf(out_file, "\t\t.name = \"[vdso]\",\n");
+ fprintf(out_file, "\t\t.pages = vdso_pages,\n");
+ fprintf(out_file, "\t},\n");
+
+ /* Calculate and write symbol offsets to <output file> */
+ if (!get_symbols(dbg_vdso_path, dbg_vdso)) {
+ unlink(out_path);
+ return EXIT_FAILURE;
+ }
+
+ fprintf(out_file, "};\n");
+
+ return EXIT_SUCCESS;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+static inline bool FUNC(patch_vdso)(const char *path, void *vdso)
+{
+ const ELF(Ehdr) *ehdr = vdso;
+ void *shdrs;
+ ELF(Shdr) *shdr;
+ char *shstrtab, *name;
+ uint16_t sh_count, sh_entsize, i;
+ unsigned int local_gotno, symtabno, gotsym;
+ ELF(Dyn) *dyn = NULL;
+
+ shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+ sh_count = swap_uint16(ehdr->e_shnum);
+ sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+ shdr = shdrs + (sh_entsize * swap_uint16(ehdr->e_shstrndx));
+ shstrtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+ for (i = 0; i < sh_count; i++) {
+ shdr = shdrs + (i * sh_entsize);
+ name = shstrtab + swap_uint32(shdr->sh_name);
+
+ /*
+ * Ensure there are no relocation sections - ld.so does not
+ * relocate the VDSO so if there are relocations things will
+ * break.
+ */
+ switch (swap_uint32(shdr->sh_type)) {
+ case SHT_REL:
+ case SHT_RELA:
+ fprintf(stderr,
+ "%s: '%s' contains relocation sections\n",
+ program_name, path);
+ return false;
+ case SHT_DYNAMIC:
+ dyn = vdso + FUNC(swap_uint)(shdr->sh_offset);
+ break;
+ }
+
+ /* Check for existing sections. */
+ if (strcmp(name, ".MIPS.abiflags") == 0) {
+ fprintf(stderr,
+ "%s: '%s' already contains a '.MIPS.abiflags' section\n",
+ program_name, path);
+ return false;
+ }
+
+ if (strcmp(name, ".mips_abiflags") == 0) {
+ strcpy(name, ".MIPS.abiflags");
+ shdr->sh_type = swap_uint32(SHT_MIPS_ABIFLAGS);
+ shdr->sh_entsize = shdr->sh_size;
+ }
+ }
+
+ /*
+ * Ensure the GOT has no entries other than the standard 2, for the same
+ * reason we check that there's no relocation sections above.
+ * The standard two entries are:
+ * - Lazy resolver
+ * - Module pointer
+ */
+ if (dyn) {
+ local_gotno = symtabno = gotsym = 0;
+
+ while (FUNC(swap_uint)(dyn->d_tag) != DT_NULL) {
+ switch (FUNC(swap_uint)(dyn->d_tag)) {
+ /*
+ * This member holds the number of local GOT entries.
+ */
+ case DT_MIPS_LOCAL_GOTNO:
+ local_gotno = FUNC(swap_uint)(dyn->d_un.d_val);
+ break;
+ /*
+ * This member holds the number of entries in the
+ * .dynsym section.
+ */
+ case DT_MIPS_SYMTABNO:
+ symtabno = FUNC(swap_uint)(dyn->d_un.d_val);
+ break;
+ /*
+ * This member holds the index of the first dynamic
+ * symbol table entry that corresponds to an entry in
+ * the GOT.
+ */
+ case DT_MIPS_GOTSYM:
+ gotsym = FUNC(swap_uint)(dyn->d_un.d_val);
+ break;
+ }
+
+ dyn++;
+ }
+
+ if (local_gotno > 2 || symtabno - gotsym) {
+ fprintf(stderr,
+ "%s: '%s' contains unexpected GOT entries\n",
+ program_name, path);
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static inline bool FUNC(get_symbols)(const char *path, void *vdso)
+{
+ const ELF(Ehdr) *ehdr = vdso;
+ void *shdrs, *symtab;
+ ELF(Shdr) *shdr;
+ const ELF(Sym) *sym;
+ char *strtab, *name;
+ uint16_t sh_count, sh_entsize, st_count, st_entsize, i, j;
+ uint64_t offset;
+ uint32_t flags;
+
+ shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+ sh_count = swap_uint16(ehdr->e_shnum);
+ sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+ for (i = 0; i < sh_count; i++) {
+ shdr = shdrs + (i * sh_entsize);
+
+ if (swap_uint32(shdr->sh_type) == SHT_SYMTAB)
+ break;
+ }
+
+ if (i == sh_count) {
+ fprintf(stderr, "%s: '%s' has no symbol table\n", program_name,
+ path);
+ return false;
+ }
+
+ /* Get flags */
+ flags = swap_uint32(ehdr->e_flags);
+ if (elf_class == ELFCLASS64)
+ elf_abi = ABI_N64;
+ else if (flags & EF_MIPS_ABI2)
+ elf_abi = ABI_N32;
+ else
+ elf_abi = ABI_O32;
+
+ /* Get symbol table. */
+ symtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+ st_entsize = FUNC(swap_uint)(shdr->sh_entsize);
+ st_count = FUNC(swap_uint)(shdr->sh_size) / st_entsize;
+
+ /* Get string table. */
+ shdr = shdrs + (swap_uint32(shdr->sh_link) * sh_entsize);
+ strtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+ /* Write offsets for symbols needed by the kernel. */
+ for (i = 0; vdso_symbols[i].name; i++) {
+ if (!(vdso_symbols[i].abis & elf_abi))
+ continue;
+
+ for (j = 0; j < st_count; j++) {
+ sym = symtab + (j * st_entsize);
+ name = strtab + swap_uint32(sym->st_name);
+
+ if (!strcmp(name, vdso_symbols[i].name)) {
+ offset = FUNC(swap_uint)(sym->st_value);
+
+ fprintf(out_file,
+ "\t.%s = 0x%" PRIx64 ",\n",
+ vdso_symbols[i].offset_name, offset);
+ break;
+ }
+ }
+
+ if (j == st_count) {
+ fprintf(stderr,
+ "%s: '%s' is missing required symbol '%s'\n",
+ program_name, path, vdso_symbols[i].name);
+ return false;
+ }
+ }
+
+ return true;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/compiler.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/time.h>
+
+#include <asm/clocksource.h>
+#include <asm/io.h>
+#include <asm/mips-cm.h>
+#include <asm/unistd.h>
+#include <asm/vdso.h>
+
+static __always_inline int do_realtime_coarse(struct timespec *ts,
+ const union mips_vdso_data *data)
+{
+ u32 start_seq;
+
+ do {
+ start_seq = vdso_data_read_begin(data);
+
+ ts->tv_sec = data->xtime_sec;
+ ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+ } while (vdso_data_read_retry(data, start_seq));
+
+ return 0;
+}
+
+static __always_inline int do_monotonic_coarse(struct timespec *ts,
+ const union mips_vdso_data *data)
+{
+ u32 start_seq;
+ u32 to_mono_sec;
+ u32 to_mono_nsec;
+
+ do {
+ start_seq = vdso_data_read_begin(data);
+
+ ts->tv_sec = data->xtime_sec;
+ ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+
+ to_mono_sec = data->wall_to_mono_sec;
+ to_mono_nsec = data->wall_to_mono_nsec;
+ } while (vdso_data_read_retry(data, start_seq));
+
+ ts->tv_sec += to_mono_sec;
+ timespec_add_ns(ts, to_mono_nsec);
+
+ return 0;
+}
+
+#ifdef CONFIG_CSRC_R4K
+
+static __always_inline u64 read_r4k_count(void)
+{
+ unsigned int count;
+
+ __asm__ __volatile__(
+ " .set push\n"
+ " .set mips32r2\n"
+ " rdhwr %0, $2\n"
+ " .set pop\n"
+ : "=r" (count));
+
+ return count;
+}
+
+#endif
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static __always_inline u64 read_gic_count(const union mips_vdso_data *data)
+{
+ void __iomem *gic = get_gic(data);
+ u32 hi, hi2, lo;
+
+ do {
+ hi = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+ lo = __raw_readl(gic + GIC_UMV_SH_COUNTER_31_00_OFS);
+ hi2 = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+ } while (hi2 != hi);
+
+ return (((u64)hi) << 32) + lo;
+}
+
+#endif
+
+static __always_inline u64 get_ns(const union mips_vdso_data *data)
+{
+ u64 cycle_now, delta, nsec;
+
+ switch (data->clock_mode) {
+#ifdef CONFIG_CSRC_R4K
+ case VDSO_CLOCK_R4K:
+ cycle_now = read_r4k_count();
+ break;
+#endif
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+ case VDSO_CLOCK_GIC:
+ cycle_now = read_gic_count(data);
+ break;
+#endif
+ default:
+ return 0;
+ }
+
+ delta = (cycle_now - data->cs_cycle_last) & data->cs_mask;
+
+ nsec = (delta * data->cs_mult) + data->xtime_nsec;
+ nsec >>= data->cs_shift;
+
+ return nsec;
+}
+
+static __always_inline int do_realtime(struct timespec *ts,
+ const union mips_vdso_data *data)
+{
+ u32 start_seq;
+ u64 ns;
+
+ do {
+ start_seq = vdso_data_read_begin(data);
+
+ if (data->clock_mode == VDSO_CLOCK_NONE)
+ return -ENOSYS;
+
+ ts->tv_sec = data->xtime_sec;
+ ns = get_ns(data);
+ } while (vdso_data_read_retry(data, start_seq));
+
+ ts->tv_nsec = 0;
+ timespec_add_ns(ts, ns);
+
+ return 0;
+}
+
+static __always_inline int do_monotonic(struct timespec *ts,
+ const union mips_vdso_data *data)
+{
+ u32 start_seq;
+ u64 ns;
+ u32 to_mono_sec;
+ u32 to_mono_nsec;
+
+ do {
+ start_seq = vdso_data_read_begin(data);
+
+ if (data->clock_mode == VDSO_CLOCK_NONE)
+ return -ENOSYS;
+
+ ts->tv_sec = data->xtime_sec;
+ ns = get_ns(data);
+
+ to_mono_sec = data->wall_to_mono_sec;
+ to_mono_nsec = data->wall_to_mono_nsec;
+ } while (vdso_data_read_retry(data, start_seq));
+
+ ts->tv_sec += to_mono_sec;
+ ts->tv_nsec = 0;
+ timespec_add_ns(ts, ns + to_mono_nsec);
+
+ return 0;
+}
+
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
+int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
+{
+ const union mips_vdso_data *data = get_vdso_data();
+ struct timespec ts;
+ int ret;
+
+ ret = do_realtime(&ts, data);
+ if (ret)
+ return ret;
+
+ if (tv) {
+ tv->tv_sec = ts.tv_sec;
+ tv->tv_usec = ts.tv_nsec / 1000;
+ }
+
+ if (tz) {
+ tz->tz_minuteswest = data->tz_minuteswest;
+ tz->tz_dsttime = data->tz_dsttime;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts)
+{
+ const union mips_vdso_data *data = get_vdso_data();
+ int ret;
+
+ switch (clkid) {
+ case CLOCK_REALTIME_COARSE:
+ ret = do_realtime_coarse(ts, data);
+ break;
+ case CLOCK_MONOTONIC_COARSE:
+ ret = do_monotonic_coarse(ts, data);
+ break;
+ case CLOCK_REALTIME:
+ ret = do_realtime(ts, data);
+ break;
+ case CLOCK_MONOTONIC:
+ ret = do_monotonic(ts, data);
+ break;
+ default:
+ ret = -ENOSYS;
+ break;
+ }
+
+ /* If we return -ENOSYS libc should fall back to a syscall. */
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <uapi/asm/unistd.h>
+
+#include <asm/regdef.h>
+#include <asm/asm.h>
+
+ .section .text
+ .cfi_sections .debug_frame
+
+LEAF(__vdso_rt_sigreturn)
+ .cfi_startproc
+ .frame sp, 0, ra
+ .mask 0x00000000, 0
+ .fmask 0x00000000, 0
+ .cfi_signal_frame
+
+ li v0, __NR_rt_sigreturn
+ syscall
+
+ .cfi_endproc
+ END(__vdso_rt_sigreturn)
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+LEAF(__vdso_sigreturn)
+ .cfi_startproc
+ .frame sp, 0, ra
+ .mask 0x00000000, 0
+ .fmask 0x00000000, 0
+ .cfi_signal_frame
+
+ li v0, __NR_sigreturn
+ syscall
+
+ .cfi_endproc
+ END(__vdso_sigreturn)
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT)
+
+/* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */
+#undef CONFIG_64BIT
+#define CONFIG_32BIT 1
+#ifndef __ASSEMBLY__
+#include <asm-generic/atomic64.h>
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+
+static inline unsigned long get_vdso_base(void)
+{
+ unsigned long addr;
+
+ /*
+ * We can't use cpu_has_mips_r6 since it needs the cpu_data[]
+ * kernel symbol.
+ */
+#ifdef CONFIG_CPU_MIPSR6
+ /*
+ * lapc <symbol> is an alias to addiupc reg, <symbol> - .
+ *
+ * We can't use addiupc because there is no label-label
+ * support for the addiupc reloc
+ */
+ __asm__("lapc %0, _start \n"
+ : "=r" (addr) : :);
+#else
+ /*
+ * Get the base load address of the VDSO. We have to avoid generating
+ * relocations and references to the GOT because ld.so does not peform
+ * relocations on the VDSO. We use the current offset from the VDSO base
+ * and perform a PC-relative branch which gives the absolute address in
+ * ra, and take the difference. The assembler chokes on
+ * "li %0, _start - .", so embed the offset as a word and branch over
+ * it.
+ *
+ */
+
+ __asm__(
+ " .set push \n"
+ " .set noreorder \n"
+ " bal 1f \n"
+ " nop \n"
+ " .word _start - . \n"
+ "1: lw %0, 0($31) \n"
+ " " STR(PTR_ADDU) " %0, $31, %0 \n"
+ " .set pop \n"
+ : "=r" (addr)
+ :
+ : "$31");
+#endif /* CONFIG_CPU_MIPSR6 */
+
+ return addr;
+}
+
+static inline const union mips_vdso_data *get_vdso_data(void)
+{
+ return (const union mips_vdso_data *)(get_vdso_base() - PAGE_SIZE);
+}
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static inline void __iomem *get_gic(const union mips_vdso_data *data)
+{
+ return (void __iomem *)data - PAGE_SIZE;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+#endif /* __ASSEMBLY__ */
--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips", "elf64-tradlittlemips")
+#elif _MIPS_SIM == _MIPS_SIM_NABI32
+OUTPUT_FORMAT("elf32-ntradlittlemips", "elf32-ntradbigmips", "elf32-ntradlittlemips")
+#else
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#endif
+
+OUTPUT_ARCH(mips)
+
+SECTIONS
+{
+ PROVIDE(_start = .);
+ . = SIZEOF_HEADERS;
+
+ /*
+ * In order to retain compatibility with older toolchains we provide the
+ * ABI flags section ourself. Newer assemblers will automatically
+ * generate .MIPS.abiflags sections so we discard such input sections,
+ * and then manually define our own section here. genvdso will patch
+ * this section to have the correct name/type.
+ */
+ .mips_abiflags : { *(.mips_abiflags) } :text :abiflags
+
+ .reginfo : { *(.reginfo) } :text :reginfo
+
+ .hash : { *(.hash) } :text
+ .gnu.hash : { *(.gnu.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .gnu.version : { *(.gnu.version) }
+ .gnu.version_d : { *(.gnu.version_d) }
+ .gnu.version_r : { *(.gnu.version_r) }
+
+ .note : { *(.note.*) } :text :note
+
+ .text : { *(.text*) } :text
+ PROVIDE (__etext = .);
+ PROVIDE (_etext = .);
+ PROVIDE (etext = .);
+
+ .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
+ .eh_frame : { KEEP (*(.eh_frame)) } :text
+
+ .dynamic : { *(.dynamic) } :text :dynamic
+
+ .rodata : { *(.rodata*) } :text
+
+ _end = .;
+ PROVIDE(end = .);
+
+ /DISCARD/ : {
+ *(.MIPS.abiflags)
+ *(.gnu.attributes)
+ *(.note.GNU-stack)
+ *(.data .data.* .gnu.linkonce.d.* .sdata*)
+ *(.bss .sbss .dynbss .dynsbss)
+ }
+}
+
+PHDRS
+{
+ /*
+ * Provide a PT_MIPS_ABIFLAGS header to assign the ABI flags section
+ * to. We can specify the header type directly here so no modification
+ * is needed later on.
+ */
+ abiflags 0x70000003;
+
+ /*
+ * The ABI flags header must exist directly after the PT_INTERP header,
+ * so we must explicitly place the PT_MIPS_REGINFO header after it to
+ * stop the linker putting one in at the start.
+ */
+ reginfo 0x70000000;
+
+ text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ note PT_NOTE FLAGS(4); /* PF_R */
+ eh_frame_hdr PT_GNU_EH_FRAME;
+}
+
+VERSION
+{
+ LINUX_2.6 {
+#ifndef DISABLE_MIPS_VDSO
+ global:
+ __vdso_clock_gettime;
+ __vdso_gettimeofday;
+#endif
+ local: *;
+ };
+}
#ifndef _ASM_NIOS2_CMPXCHG_H
#define _ASM_NIOS2_CMPXCHG_H
-#include <linux/irqflags.h>
-
-#define xchg(ptr, x) \
- ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
- int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__(
- "ldb %0, %2\n"
- "stb %1, %2\n"
- : "=&r" (tmp)
- : "r" (x), "m" (*__xg(ptr))
- : "memory");
- break;
- case 2:
- __asm__ __volatile__(
- "ldh %0, %2\n"
- "sth %1, %2\n"
- : "=&r" (tmp)
- : "r" (x), "m" (*__xg(ptr))
- : "memory");
- break;
- case 4:
- __asm__ __volatile__(
- "ldw %0, %2\n"
- "stw %1, %2\n"
- : "=&r" (tmp)
- : "r" (x), "m" (*__xg(ptr))
- : "memory");
- break;
- }
-
- local_irq_restore(flags);
- return tmp;
-}
-
#include <asm-generic/cmpxchg.h>
-#include <asm-generic/cmpxchg-local.h>
#endif /* _ASM_NIOS2_CMPXCHG_H */
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
/*
- * PA 2.0 processors have 64-byte cachelines; PA 1.1 processors have
- * 32-byte cachelines. The default configuration is not for SMP anyway,
- * so if you're building for SMP, you should select the appropriate
- * processor type. There is a potential livelock danger when running
- * a machine with this value set too small, but it's more probable you'll
- * just ruin performance.
+ * PA 2.0 processors have 64 and 128-byte L2 cachelines; PA 1.1 processors
+ * have 32-byte cachelines. The L1 length appears to be 16 bytes but this
+ * is not clearly documented.
*/
-#ifdef CONFIG_PA20
-#define L1_CACHE_BYTES 64
-#define L1_CACHE_SHIFT 6
-#else
-#define L1_CACHE_BYTES 32
-#define L1_CACHE_SHIFT 5
-#endif
+#define L1_CACHE_BYTES 16
+#define L1_CACHE_SHIFT 4
#ifndef __ASSEMBLY__
#define __NR_memfd_create (__NR_Linux + 340)
#define __NR_bpf (__NR_Linux + 341)
#define __NR_execveat (__NR_Linux + 342)
+#define __NR_membarrier (__NR_Linux + 343)
+#define __NR_userfaultfd (__NR_Linux + 344)
-#define __NR_Linux_syscalls (__NR_execveat + 1)
+#define __NR_Linux_syscalls (__NR_userfaultfd + 1)
#define __IGNORE_select /* newselect */
ENTRY_SAME(memfd_create) /* 340 */
ENTRY_SAME(bpf)
ENTRY_COMP(execveat)
+ ENTRY_SAME(membarrier)
+ ENTRY_SAME(userfaultfd)
.ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))
config KEXEC
bool "kexec system call"
- depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
endif
endif
-CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
-
asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr)
pseries_le_defconfig:
$(call merge_into_defconfig,pseries_defconfig,le)
+PHONY += ppc64le_defconfig
+ppc64le_defconfig:
+ $(call merge_into_defconfig,ppc64_defconfig,le)
+
PHONY += mpc85xx_defconfig
mpc85xx_defconfig:
$(call merge_into_defconfig,mpc85xx_basic_defconfig,\
$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+$(obj)/cuImage.%: vmlinux $(obj)/fsl/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/fsl/$*.dtb)
+
$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
* this software, even if advised of the possibility of such damage.
*/
-/include/ "fsl/b4420si-pre.dtsi"
+/include/ "b4420si-pre.dtsi"
/include/ "b4qds.dtsi"
/ {
};
-/include/ "fsl/b4420si-post.dtsi"
+/include/ "b4420si-post.dtsi"
compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
};
- L2: l2-cache-controller@c20000 {
+ L2_1: l2-cache-controller@c20000 {
compatible = "fsl,b4420-l2-cache-controller";
+ reg = <0xc20000 0x40000>;
+ next-level-cache = <&cpc>;
};
};
/*
* B4420 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
- };
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ };
cpus {
#address-cells = <1>;
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
};
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/b4860si-pre.dtsi"
+/include/ "b4860si-pre.dtsi"
/include/ "b4qds.dtsi"
/ {
};
-/include/ "fsl/b4860si-post.dtsi"
+/include/ "b4860si-post.dtsi"
/*
* B4860 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
- fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
- fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
};
- L2: l2-cache-controller@c20000 {
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+ fman@400000 {
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+ };
+
+ L2_1: l2-cache-controller@c20000 {
compatible = "fsl,b4860-l2-cache-controller";
+ reg = <0xc20000 0x40000>;
+ next-level-cache = <&cpc>;
};
};
/*
* B4860 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
};
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
- next-level-cache = <&L2>;
+ next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
};
};
-/include/ "fsl/b4si-post.dtsi"
+/include/ "b4si-post.dtsi"
/*
* B4420 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2012 - 2014 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
interrupts = <16 2 1 29>;
};
- L2: l2-cache-controller@c20000 {
- compatible = "fsl,b4-l2-cache-controller";
- reg = <0xc20000 0x1000>;
- next-level-cache = <&cpc>;
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+ fman@400000 {
+ interrupts = <96 2 0 0>, <16 2 1 30>;
+
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ mdio@fc000 {
+ interrupts = <100 1 0 0>;
+ };
+
+ mdio@fd000 {
+ interrupts = <101 1 0 0>;
+ };
};
};
* option) any later version.
*/
-/include/ "fsl/bsc9131si-pre.dtsi"
+/include/ "bsc9131si-pre.dtsi"
/ {
model = "fsl,bsc9131rdb";
};
/include/ "bsc9131rdb.dtsi"
-/include/ "fsl/bsc9131si-post.dtsi"
+/include/ "bsc9131si-post.dtsi"
status = "disabled";
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xcccccccd>;
+ fsl,tmr-fiper1 = <999999995>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <249999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
* option) any later version.
*/
-/include/ "fsl/bsc9132si-pre.dtsi"
+/include/ "bsc9132si-pre.dtsi"
/ {
model = "fsl,bsc9132qds";
};
/include/ "bsc9132qds.dtsi"
-/include/ "fsl/bsc9132si-post.dtsi"
+/include/ "bsc9132si-post.dtsi"
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xcccccccd>;
+ fsl,tmr-fiper1 = <999999995>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <249999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/c293si-pre.dtsi"
+/include/ "c293si-pre.dtsi"
/ {
model = "fsl,C293PCIE";
phy-connection-type = "rgmii-id";
};
};
-/include/ "fsl/c293si-post.dtsi"
+/include/ "c293si-post.dtsi"
--- /dev/null
+/*
+ * Cyrus 5020 Device Tree Source, based on p5020ds.dts
+ *
+ * Copyright 2015 Andy Fleming
+ *
+ * p5020ds.dts copyright:
+ * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+ model = "varisys,CYRUS";
+ compatible = "varisys,CYRUS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ };
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ bportals: bman-portals@ff4000000 {
+ ranges = <0x0 0xf 0xf4000000 0x200000>;
+ };
+
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ };
+
+ i2c@118100 {
+ };
+
+ i2c@119100 {
+ rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ };
+ };
+ };
+
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xffa00000 0x00040000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ reg = <0xf 0xfe201000 0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ reg = <0xf 0xfe202000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci3: pcie@ffe203000 {
+ reg = <0xf 0xfe203000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "p5020si-post.dtsi"
* Copyright 2009 Freescale Semiconductor Inc.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "GE_IMP3A";
};
};
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
/ {
model = "keymile,kmcoge4";
};
};
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
};
};
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
/include/ "mpc8536ds.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
};
};
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
/include/ "mpc8536ds.dtsi"
/* mark compat w/8572 to get some erratum treatment */
gpio-controller@f000 {
- compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ compatible = "fsl,mpc8572-gpio";
};
sata@18000 {
/dts-v1/;
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
/ {
model = "MPC8540ADS";
/dts-v1/;
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
/ {
model = "MPC8541CDS";
* option) any later version.
*/
-/include/ "fsl/mpc8544si-pre.dtsi"
+/include/ "mpc8544si-pre.dtsi"
/ {
model = "MPC8544DS";
* for interrupt-map & interrupt-map-mask
*/
-/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544si-post.dtsi"
/include/ "mpc8544ds.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
* for interrupt-map & interrupt-map-mask.
*/
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
* for interrupt-map & interrupt-map-mask.
*/
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"
/dts-v1/;
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
/ {
model = "MPC8555CDS";
/dts-v1/;
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
/ {
model = "MPC8560ADS";
* option) any later version.
*/
-/include/ "fsl/mpc8568si-pre.dtsi"
+/include/ "mpc8568si-pre.dtsi"
/ {
model = "MPC8568EMDS";
};
};
-/include/ "fsl/mpc8568si-post.dtsi"
+/include/ "mpc8568si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8569si-pre.dtsi"
+/include/ "mpc8569si-pre.dtsi"
/ {
model = "MPC8569EMDS";
};
};
-/include/ "fsl/mpc8569si-post.dtsi"
+/include/ "mpc8569si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
/ {
model = "fsl,MPC8572DS";
* for interrupt-map & interrupt-map-mask
*/
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
/include/ "mpc8572ds.dtsi"
* option) any later version.
*/
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
/ {
model = "fsl,MPC8572DS";
* for interrupt-map & interrupt-map-mask
*/
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
/include/ "mpc8572ds.dtsi"
/include/ "pq3-dma-1.dtsi"
/include/ "pq3-gpio-0.dtsi"
gpio-controller@f000 {
- compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ compatible = "fsl,mpc8572-gpio";
};
L2: l2-cache-controller@20000 {
* Copyright 2009 Freescale Semiconductor Inc.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "MVME2500";
};
};
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
/ {
soc@ffe00000 {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
/ {
model = "fsl,OCA4080";
};
};
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
/include/ "p1010rdb.dtsi"
/include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
/include/ "p1010rdb.dtsi"
/include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
interrupts = <1 1 0 0>;
};
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
interrupts = <1 1 0 0>;
};
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <999999990>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020MBG-PC";
compatible = "fsl,P1020MBG-PC";
};
/include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020MBG-PC";
compatible = "fsl,P1020MBG-PC";
};
/include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
};
/include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
};
/include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PD";
compatible = "fsl,P1020RDB-PD";
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <999999990>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
};
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
};
/include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
};
/include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020UTM-PC";
compatible = "fsl,P1020UTM-PC";
};
/include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1020UTM-PC";
compatible = "fsl,P1020UTM-PC";
};
/include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
};
};
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <999999990>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
};
/include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
};
/include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xc01ebd3d>;
+ fsl,tmr-fiper1 = <999999995>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <266499999>;
+ };
+
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
};
};
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
/include/ "p1022ds.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
};
};
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
/include/ "p1022ds.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
/ {
model = "fsl,P1022RDK";
compatible = "fsl,P1022RDK";
};
};
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1023si-pre.dtsi"
+/include/ "p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
};
};
-/include/ "fsl/p1023si-post.dtsi"
+/include/ "p1023si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1024RDB";
compatible = "fsl,P1024RDB";
};
/include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
/ {
model = "fsl,P1024RDB";
compatible = "fsl,P1024RDB";
};
/include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
};
/include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
};
/include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1025";
compatible = "fsl,TWR-P1025";
};
/include/ "p1025twr.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xc0000021>;
+ fsl,tmr-fiper1 = <999999990>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <133333332>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
* option) any later version.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "fsl,P2020DS";
* for interrupt-map & interrupt-map-mask
*/
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
/include/ "p2020ds.dtsi"
};
ptp_clock@24e00 {
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xaaaaaaab>;
+ fsl,tmr-fiper1 = <999999995>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <299999999>;
};
enet0: ethernet@24000 {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
};
/include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
};
/include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
* option) any later version.
*/
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
};
};
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
};
};
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
/*
* P2041/P2040 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@f0000 {
+ };
+ };
};
/*
* P2041 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
};
cpus {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p3041si-pre.dtsi"
+/include/ "p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
};
};
-/include/ "fsl/p3041si-post.dtsi"
+/include/ "p3041si-post.dtsi"
/*
* P3041 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@f0000 {
+ };
+ };
};
/*
* P3041 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
};
cpus {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
};
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
/*
* P4080/P4040 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@f0000 {
+ };
+ };
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+ fman@500000 {
+ enet5: ethernet@e0000 {
+ };
+
+ enet6: ethernet@e2000 {
+ };
+
+ enet7: ethernet@e4000 {
+ };
+
+ enet8: ethernet@e6000 {
+ };
+
+ enet9: ethernet@f0000 {
+ };
+ };
};
/*
* P4080/P4040 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ fman0 = &fman0;
+ fman1 = &fman1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
+ ethernet8 = &enet8;
+ ethernet9 = &enet9;
};
cpus {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p5020si-pre.dtsi"
+/include/ "p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
};
};
-/include/ "fsl/p5020si-post.dtsi"
+/include/ "p5020si-post.dtsi"
/*
* P5020/5010 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
raideng@320000 {
fsl,iommu-parent = <&pamu1>;
};
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@f0000 {
+ };
+ };
};
/*
* P5020/P5010 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
raideng_jr1 = &raideng_jr1;
raideng_jr2 = &raideng_jr2;
raideng_jr3 = &raideng_jr3;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
};
cpus {
* software, even if advised of the possibility of such damage.
*/
-/include/ "fsl/p5040si-pre.dtsi"
+/include/ "p5040si-pre.dtsi"
/ {
model = "fsl,P5040DS";
};
};
-/include/ "fsl/p5040si-post.dtsi"
+/include/ "p5040si-post.dtsi"
/*
* P5040 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@f0000 {
+ };
+ };
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-1g-4.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+ fman@500000 {
+ enet6: ethernet@e0000 {
+ };
+
+ enet7: ethernet@e2000 {
+ };
+
+ enet8: ethernet@e4000 {
+ };
+
+ enet9: ethernet@e6000 {
+ };
+
+ enet10: ethernet@e8000 {
+ };
+
+ enet11: ethernet@f0000 {
+ };
+ };
};
/*
* P5040 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ fman0 = &fman0;
+ fman1 = &fman1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
+ ethernet8 = &enet8;
+ ethernet9 = &enet9;
+ ethernet10 = &enet10;
+ ethernet11 = &enet11;
};
cpus {
* option) any later version.
*/
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
/ {
model = "ppa8548";
};
};
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
+ #clock-cells = <2>;
sysclk: sysclk {
#clock-cells = <0>;
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-2.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ #clock-cells = <2>;
sysclk: sysclk {
#clock-cells = <0>;
--- /dev/null
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x90000 0x1000>;
+ };
+
+ fman0_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xb0000 0x1000>;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-xgec";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ };
+
+ xmdio0: mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ tbi-handle = <&tbi0>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio0: mdio@e1120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe1120 0xee0>;
+ interrupts = <100 2 0 0>;
+
+ tbi0: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ tbi-handle = <&tbi1>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e3120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe3120 0xee0>;
+
+ tbi1: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman0_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+ tbi-handle = <&tbi2>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e5120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe5120 0xee0>;
+
+ tbi2: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman0_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+ tbi-handle = <&tbi3>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e7120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe7120 0xee0>;
+
+ tbi3: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman0_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ tbi-handle = <&tbi4>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e9120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe9120 0xee0>;
+
+ tbi4: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0 0x400000 0x100000>;
+ reg = <0x400000 0x100000>;
+ interrupts = <96 2 0 0>, <16 2 1 1>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x40 0xc>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x28000>;
+ };
+
+ fman0_oh_0x1: port@81000 {
+ cell-index = <0x1>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x81000 0x1000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x85000 0x1000>;
+ status = "disabled";
+ };
+
+ fman0_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x86000 0x1000>;
+ status = "disabled";
+ };
+
+ fman0_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x87000 0x1000>;
+ status = "disabled";
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x90000 0x1000>;
+ };
+
+ fman1_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xb0000 0x1000>;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-xgec";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman1_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+ tbi-handle = <&tbi5>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e1120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe1120 0xee0>;
+
+ tbi5: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman1_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+ tbi-handle = <&tbi6>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e3120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe3120 0xee0>;
+
+ tbi6: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman1_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+ tbi-handle = <&tbi7>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e5120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe5120 0xee0>;
+
+ tbi7: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman1_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+ tbi-handle = <&tbi8>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e7120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe7120 0xee0>;
+
+ tbi8: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman1_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-dtsec";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+ tbi-handle = <&tbi9>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e9120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-mdio";
+ reg = <0xe9120 0xee0>;
+
+ tbi9: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ compatible = "fsl,fman";
+ ranges = <0 0x500000 0x100000>;
+ reg = <0x500000 0x100000>;
+ interrupts = <97 2 0 0>, <16 2 1 0>;
+ clocks = <&clockgen 3 1>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x60 0xc>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x28000>;
+ };
+
+ fman1_oh_0x1: port@81000 {
+ cell-index = <0x1>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x81000 0x1000>;
+ };
+
+ fman1_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman1_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman1_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman1_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x85000 0x1000>;
+ status = "disabled";
+ };
+
+ fman1_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x86000 0x1000>;
+ status = "disabled";
+ };
+
+ fman1_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x87000 0x1000>;
+ status = "disabled";
+ };
+
+ ptp_timer1: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,fman-best-effort-port;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,fman-best-effort-port;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x90000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb0000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,fman-best-effort-port;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,fman-best-effort-port;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x11: port@91000 {
+ cell-index = <0x11>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x91000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x31: port@b1000 {
+ cell-index = <0x31>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f2000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+ };
+
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf3000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman0_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe5000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman0_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe7000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman0_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@e9000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe9000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+ fman0_rx_0x0d: port@8d000 {
+ cell-index = <0xd>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8d000 0x1000>;
+ };
+
+ fman0_tx_0x2d: port@ad000 {
+ cell-index = <0x2d>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xad000 0x1000>;
+ };
+
+ ethernet@ea000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-memac";
+ reg = <0xea000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+ ptp-timer = <&ptp_timer0>;
+ };
+
+ mdio@eb000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xeb000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0 0x400000 0x100000>;
+ reg = <0x400000 0x100000>;
+ interrupts = <96 2 0 0>, <16 2 1 1>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x60000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman0_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman0_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x90000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman1_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb0000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x11: port@91000 {
+ cell-index = <0x11>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x91000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman1_tx_0x31: port@b1000 {
+ cell-index = <0x31>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f2000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+ };
+
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf3000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman1_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman1_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman1_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe5000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman1_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe7000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman1_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@e9000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe9000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+ fman1_rx_0x0d: port@8d000 {
+ cell-index = <0xd>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8d000 0x1000>;
+ };
+
+ fman1_tx_0x2d: port@ad000 {
+ cell-index = <0x2d>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xad000 0x1000>;
+ };
+
+ ethernet@ea000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-memac";
+ reg = <0xea000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
+ ptp-timer = <&ptp_timer1>;
+ };
+
+ mdio@eb000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xeb000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ compatible = "fsl,fman";
+ ranges = <0 0x500000 0x100000>;
+ reg = <0x500000 0x100000>;
+ interrupts = <97 2 0 0>, <16 2 1 0>;
+ clocks = <&clockgen 3 1>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x820 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x60000>;
+ };
+
+ fman1_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman1_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman1_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman1_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman1_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman1_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+ mdio1: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer1: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0 0x400000 0x100000>;
+ reg = <0x400000 0x100000>;
+ interrupts = <96 2 0 0>, <16 2 1 1>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x30000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
/ {
model = "fsl,T1023RDB";
};
};
-/include/ "fsl/t1023si-post.dtsi"
+/include/ "t1023si-post.dtsi"
};
/include/ "qoriq-sec5.0-0.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+ };
};
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
/ {
model = "fsl,T1024QDS";
};
};
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
/ {
model = "fsl,T1024RDB";
};
};
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
sdhc = &sdhc;
crypto = &crypto;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
};
cpus {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xd4rdb.dtsi"
/ {
interrupt-parent = <&mpic>;
};
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xqds.dtsi"
/ {
interrupt-parent = <&mpic>;
};
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"
/ {
};
};
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
/include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ mdio@fc000 {
+ interrupts = <100 1 0 0>;
+ };
+
+ mdio@fd000 {
+ status = "disabled";
+ };
+ };
};
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xd4rdb.dtsi"
/ {
};
};
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xqds.dtsi"
/ {
interrupt-parent = <&mpic>;
};
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"
/ {
};
};
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"
/ {
};
};
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
/* input clock */
spi-max-frequency = <10000000>;
};
+ slic@1 {
+ compatible = "maxim,ds26522";
+ reg = <1>;
+ spi-max-frequency = <2000000>; /* input clock */
+ };
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>; /* input clock */
+ };
};
i2c@118000 {
hwmon@4c {
/*
* T1040/T1042 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013-2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
sdhc = &sdhc;
crypto = &crypto;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
};
cpus {
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
/include/ "t208xqds.dtsi"
/ {
};
};
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
/include/ "t208xrdb.dtsi"
/ {
};
};
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
/include/ "t208xqds.dtsi"
/ {
interrupt-parent = <&mpic>;
};
-/include/ "fsl/t2081si-post.dtsi"
+/include/ "t2081si-post.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+
+ mdio@fc000 {
+ interrupts = <100 1 0 0>;
+ };
+
+ mdio@fd000 {
+ interrupts = <101 1 0 0>;
+ };
+ };
+
L2_1: l2-cache-controller@c20000 {
/* Cluster 0 L2 cache */
compatible = "fsl,t2080-l2-cache-controller";
serial3 = &serial3;
crypto = &crypto;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
+
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
/ {
model = "fsl,T4240QDS";
};
};
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
/ {
model = "fsl,T4240RDB";
};
};
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"
/*
* T4240 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+
+ mdio@fc000 {
+ status = "disabled";
+ };
+
+ mdio@fd000 {
+ status = "disabled";
+ };
+ };
+
+/include/ "qoriq-fman3-1.dtsi"
+/include/ "qoriq-fman3-1-1g-0.dtsi"
+/include/ "qoriq-fman3-1-1g-1.dtsi"
+/include/ "qoriq-fman3-1-1g-2.dtsi"
+/include/ "qoriq-fman3-1-1g-3.dtsi"
+/include/ "qoriq-fman3-1-1g-4.dtsi"
+/include/ "qoriq-fman3-1-1g-5.dtsi"
+/include/ "qoriq-fman3-1-10g-0.dtsi"
+/include/ "qoriq-fman3-1-10g-1.dtsi"
+ fman@500000 {
+ enet8: ethernet@e0000 {
+ };
+
+ enet9: ethernet@e2000 {
+ };
+
+ enet10: ethernet@e4000 {
+ };
+
+ enet11: ethernet@e6000 {
+ };
+
+ enet12: ethernet@e8000 {
+ };
+
+ enet13: ethernet@ea000 {
+ };
+
+ enet14: ethernet@f0000 {
+ };
+
+ enet15: ethernet@f2000 {
+ };
+
+ mdio@fc000 {
+ interrupts = <100 1 0 0>;
+ };
+
+ mdio@fd000 {
+ interrupts = <101 1 0 0>;
+ };
+ };
+
L2_1: l2-cache-controller@c20000 {
compatible = "fsl,t4240-l2-cache-controller";
reg = <0xc20000 0x40000>;
/*
* T4240 Silicon/SoC Device Tree Source (pre include)
*
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
serial2 = &serial2;
serial3 = &serial3;
crypto = &crypto;
+
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
dma1 = &dma1;
dma2 = &dma2;
sdhc = &sdhc;
+
+ fman0 = &fman0;
+ fman1 = &fman1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
+ ethernet8 = &enet8;
+ ethernet9 = &enet9;
+ ethernet10 = &enet10;
+ ethernet11 = &enet11;
+ ethernet12 = &enet12;
+ ethernet13 = &enet13;
+ ethernet14 = &enet14;
+ ethernet15 = &enet15;
};
cpus {
#address-cells = <2>;
#size-cells = <1>;
reg = <0x80000020 0x40>;
- interrupts = <7 0x8>;
ranges = <0x0 0x0 0xfc000000 0x04000000>;
};
/* LocalPlus controller */
lpc@10000 {
compatible = "fsl,mpc5121-lpc";
- reg = <0x10000 0x200>;
+ reg = <0x10000 0x100>;
+ };
+
+ sclpc@10100 {
+ compatible = "fsl,mpc512x-lpbfifo";
+ reg = <0x10100 0x50>;
+ interrupts = <7 0x8>;
+ dmas = <&dma0 26>;
+ dma-names = "rx-tx";
};
pata@10200 {
status = "disabled";
};
+ sclpc@10100 {
+ compatible = "fsl,mpc512x-lpbfifo";
+ reg = <0x10100 0x50>;
+ interrupts = <7 0x8>;
+ dmas = <&dma0 26>;
+ dma-names = "rx-tx";
+ };
+
// 5125 PSCs are not 52xx or 5121 PSC compatible
// PSC1 uart0 aka ttyPSC0
serial@11100 {
clock-names = "ipg";
};
- dma@14000 {
+ dma0: dma@14000 {
compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
reg = <0x14000 0x1800>;
interrupts = <65 0x8>;
+ #dma-cells = <1>;
};
};
};
+++ /dev/null
-/* Device Tree Source for Motorola PrPMC2800
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Property values that are labeled as "Default" will be updated by bootwrapper
- * if it can determine the exact PrPMC type.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "PrPMC280/PrPMC2800"; /* Default */
- compatible = "motorola,PrPMC2800";
- coherency-off;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,7447 {
- device_type = "cpu";
- reg = <0>;
- clock-frequency = <733333333>; /* Default */
- bus-frequency = <133333333>;
- timebase-frequency = <33333333>;
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <32768>;
- d-cache-size = <32768>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; /* Default (512MB) */
- };
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- flash@a0000000 {
- device_type = "rom";
- compatible = "direct-mapped";
- reg = <0xa0000000 0x4000000>; /* Default (64MB) */
- probe-type = "CFI";
- bank-width = <4>;
- partitions = <0x00000000 0x00100000 /* RO */
- 0x00100000 0x00040001 /* RW */
- 0x00140000 0x00400000 /* RO */
- 0x00540000 0x039c0000 /* RO */
- 0x03f00000 0x00100000>; /* RO */
- partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
- PHY0: ethernet-phy@1 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
- PHY1: ethernet-phy@3 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <3>;
- };
- };
-
- ethernet-group@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-group";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@1 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <1>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- phy = <&PHY1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- SDMA0: sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
- SDMA1: sdma@6000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x6000 0xc18>;
- virtual-reg = <0xf1006000>;
- interrupts = <38>;
- interrupt-parent = <&PIC>;
- };
-
- BRG0: brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
- BRG1: brg@b208 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb208 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
- CUNIT: cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
- MPSCROUTING: mpscrouting@b400 {
- reg = <0xb400 0xc>;
- };
-
- MPSCINTR: mpscintr@b800 {
- reg = <0xb800 0x100>;
- virtual-reg = <0xf100b800>;
- };
-
- MPSC0: mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
- MPSC1: mpsc@9000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x9000 0x38>;
- virtual-reg = <0xf1009000>;
- sdma = <&SDMA1>;
- brg = <&BRG1>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <1>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
-
- wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
- i2c@c000 {
- device_type = "i2c";
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
- PIC: pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
- gpp@f100 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0xc34>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
- };
-
- chosen {
- bootargs = "ip=on";
- linux,stdout-path = &MPSC0;
- };
-};
#define PAGE_MASK (~(PAGE_SIZE-1))
/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
+#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1)))
+#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1)))
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
+++ /dev/null
-/*
- * Motorola ECC prpmc280/f101 & prpmc2800/f101e platform code.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "gunzip_util.h"
-#include "mv64x60.h"
-
-#define KB 1024U
-#define MB (KB*KB)
-#define GB (KB*MB)
-#define MHz (1000U*1000U)
-#define GHz (1000U*MHz)
-
-#define BOARD_MODEL "PrPMC2800"
-#define BOARD_MODEL_MAX 32 /* max strlen(BOARD_MODEL) + 1 */
-
-#define EEPROM2_ADDR 0xa4
-#define EEPROM3_ADDR 0xa8
-
-BSS_STACK(16*KB);
-
-static u8 *bridge_base;
-
-typedef enum {
- BOARD_MODEL_PRPMC280,
- BOARD_MODEL_PRPMC2800,
-} prpmc2800_board_model;
-
-typedef enum {
- BRIDGE_TYPE_MV64360,
- BRIDGE_TYPE_MV64362,
-} prpmc2800_bridge_type;
-
-struct prpmc2800_board_info {
- prpmc2800_board_model model;
- char variant;
- prpmc2800_bridge_type bridge_type;
- u8 subsys0;
- u8 subsys1;
- u8 vpd4;
- u8 vpd4_mask;
- u32 core_speed;
- u32 mem_size;
- u32 boot_flash;
- u32 user_flash;
-};
-
-static struct prpmc2800_board_info prpmc2800_board_info[] = {
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'a',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x00,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'b',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x01,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 0,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'c',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x02,
- .vpd4_mask = 0x0f,
- .core_speed = 733*MHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'd',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x03,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'e',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x04,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'f',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x05,
- .vpd4_mask = 0x0f,
- .core_speed = 733*MHz,
- .mem_size = 128*MB,
- .boot_flash = 1*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'g',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x06,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 256*MB,
- .boot_flash = 1*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'h',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x07,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'a',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8c,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'b',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xb2,
- .subsys1 = 0x8d,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 0,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'c',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8e,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'd',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8f,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'e',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8a,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'f',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xa2,
- .subsys1 = 0x8b,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 128*MB,
- .boot_flash = 2*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'g',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8c,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 2*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'h',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8d,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 1*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
-};
-
-static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd)
-{
- struct prpmc2800_board_info *bip;
- int i;
-
- for (i=0,bip=prpmc2800_board_info; i<ARRAY_SIZE(prpmc2800_board_info);
- i++,bip++)
- if ((vpd[0] == bip->subsys0) && (vpd[1] == bip->subsys1)
- && ((vpd[4] & bip->vpd4_mask) == bip->vpd4))
- return bip;
-
- return NULL;
-}
-
-/* Get VPD from i2c eeprom 2, then match it to a board info entry */
-static struct prpmc2800_board_info *prpmc2800_get_bip(void)
-{
- struct prpmc2800_board_info *bip;
- u8 vpd[5];
- int rc;
-
- if (mv64x60_i2c_open())
- fatal("Error: Can't open i2c device\n\r");
-
- /* Get VPD from i2c eeprom-2 */
- memset(vpd, 0, sizeof(vpd));
- rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd));
- if (rc < 0)
- fatal("Error: Couldn't read eeprom2\n\r");
- mv64x60_i2c_close();
-
- /* Get board type & related info */
- bip = prpmc2800_get_board_info(vpd);
- if (bip == NULL) {
- printf("Error: Unsupported board or corrupted VPD:\n\r");
- printf(" 0x%x 0x%x 0x%x 0x%x 0x%x\n\r",
- vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]);
- printf("Using device tree defaults...\n\r");
- }
-
- return bip;
-}
-
-static void prpmc2800_bridge_setup(u32 mem_size)
-{
- u32 i, v[12], enables, acc_bits;
- u32 pci_base_hi, pci_base_lo, size, buf[2];
- unsigned long cpu_base;
- int rc;
- void *devp;
- u8 *bridge_pbase, is_coherent;
- struct mv64x60_cpu2pci_win *tbl;
-
- bridge_pbase = mv64x60_get_bridge_pbase();
- is_coherent = mv64x60_is_coherent();
-
- if (is_coherent)
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
- else
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
- mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
- mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size,
- acc_bits);
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360-pci"
- " device tree node\n\r");
-
- rc = getprop(devp, "ranges", v, sizeof(v));
- if (rc != sizeof(v))
- fatal("Error: Can't find marvell,mv64360-pci ranges"
- " property\n\r");
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
- enables |= 0x0007fe00; /* Disable all cpu->pci windows */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
- for (i=0; i<12; i+=6) {
- switch (v[i] & 0xff000000) {
- case 0x01000000: /* PCI I/O Space */
- tbl = mv64x60_cpu2pci_io;
- break;
- case 0x02000000: /* PCI MEM Space */
- tbl = mv64x60_cpu2pci_mem;
- break;
- default:
- continue;
- }
-
- pci_base_hi = v[i+1];
- pci_base_lo = v[i+2];
- cpu_base = v[i+3];
- size = v[i+5];
-
- buf[0] = cpu_base;
- buf[1] = size;
-
- if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
- fatal("Error: Can't translate PCI address 0x%x\n\r",
- (u32)cpu_base);
-
- mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi,
- pci_base_lo, cpu_base, size, tbl);
- }
-
- enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-}
-
-static void prpmc2800_fixups(void)
-{
- u32 v[2], l, mem_size;
- int rc;
- void *devp;
- char model[BOARD_MODEL_MAX];
- struct prpmc2800_board_info *bip;
-
- bip = prpmc2800_get_bip(); /* Get board info based on VPD */
-
- mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base);
- prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */
-
- /* If the VPD doesn't match what we know about, just use the
- * defaults already in the device tree.
- */
- if (!bip)
- return;
-
- /* Know the board type so override device tree defaults */
- /* Set /model appropriately */
- devp = finddevice("/");
- if (devp == NULL)
- fatal("Error: Missing '/' device tree node\n\r");
- memset(model, 0, BOARD_MODEL_MAX);
- strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2);
- l = strlen(model);
- if (bip->model == BOARD_MODEL_PRPMC280)
- l--;
- model[l++] = bip->variant;
- model[l++] = '\0';
- setprop(devp, "model", model, l);
-
- /* Set /cpus/PowerPC,7447/clock-frequency */
- devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
- if (devp == NULL)
- fatal("Error: Missing proper cpu device tree node\n\r");
- v[0] = bip->core_speed;
- setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
-
- /* Set /memory/reg size */
- devp = finddevice("/memory");
- if (devp == NULL)
- fatal("Error: Missing /memory device tree node\n\r");
- v[0] = 0;
- v[1] = bip->mem_size;
- setprop(devp, "reg", v, sizeof(v));
-
- /* Update model, if this is a mv64362 */
- if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360"
- " device tree node\n\r");
- setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
- }
-
- /* Set User FLASH size */
- devp = find_node_by_compatible(NULL, "direct-mapped");
- if (devp == NULL)
- fatal("Error: Missing User FLASH device tree node\n\r");
- rc = getprop(devp, "reg", v, sizeof(v));
- if (rc != sizeof(v))
- fatal("Error: Can't find User FLASH reg property\n\r");
- v[1] = bip->user_flash;
- setprop(devp, "reg", v, sizeof(v));
-}
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE_SET 0xf118
-
-static void prpmc2800_reset(void)
-{
- u32 temp;
-
- udelay(5000000);
-
- if (bridge_base != 0) {
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
- 0x00080004);
- }
-
- for (;;);
-}
-
-#define HEAP_SIZE (16*MB)
-static struct gunzip_state gzstate;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- struct elf_info ei;
- char *heap_start, *dtb;
- int dt_size = _dtb_end - _dtb_start;
- void *vmlinuz_addr = _vmlinux_start;
- unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
- char elfheader[256];
-
- if (dt_size <= 0) /* No fdt */
- exit();
-
- /*
- * Start heap after end of the kernel (after decompressed to
- * address 0) or the end of the zImage, whichever is higher.
- * That's so things allocated by simple_alloc won't overwrite
- * any part of the zImage and the kernel won't overwrite the dtb
- * when decompressed & relocated.
- */
- gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
- gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
-
- if (!parse_elf32(elfheader, &ei))
- exit();
-
- heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/
- heap_start = max(heap_start, (char *)_end); /* end of zImage */
-
- if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16)
- > (128*MB))
- exit();
-
- /* Relocate dtb to safe area past end of zImage & kernel */
- dtb = malloc(dt_size);
- if (!dtb)
- exit();
- memmove(dtb, _dtb_start, dt_size);
- fdt_init(dtb);
-
- bridge_base = mv64x60_get_bridge_base();
-
- platform_ops.fixups = prpmc2800_fixups;
- platform_ops.exit = prpmc2800_reset;
-
- if (serial_console_init() < 0)
- exit();
-}
-
-/* _zimage_start called very early--need to turn off external interrupts */
-asm (" .globl _zimage_start\n\
- _zimage_start:\n\
- mfmsr 10\n\
- rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\
- sync\n\
- mtmsr 10\n\
- isync\n\
- b _zimage_start_lib\n\
-");
exit 1
}
+run_cmd() {
+ if [ "$V" = 1 ]; then
+ $* 2>&1
+ else
+ local msg
+
+ set +e
+ msg=$($* 2>&1)
+
+ if [ $? -ne "0" ]; then
+ echo $msg
+ exit 1
+ fi
+ set -e
+ fi
+}
+
while [ "$#" -gt 0 ]; do
case "$1" in
-o)
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
- dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$overlay_dest seek=$system_reset_kernel \
+ run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$overlay_dest seek=$system_reset_kernel \
count=$overlay_size bs=1
- dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$system_reset_overlay seek=$overlay_dest \
+ run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$system_reset_overlay seek=$overlay_dest \
count=$overlay_size bs=1
odir="$(dirname "$ofile.bin")"
CONFIG_PPC64=y
-CONFIG_TUNE_CELL=y
+CONFIG_CELL_CPU=y
CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_RTC_DRV_MPC5121=y
CONFIG_DMADEVICES=y
CONFIG_MPC512X_DMA=y
+CONFIG_MPC512x_LPBFIFO=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_VIRTIO=m
-CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
CONFIG_PPC64=y
-CONFIG_TUNE_CELL=y
+CONFIG_CELL_CPU=y
CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_RTC_DRV_PS3=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
CONFIG_DEBUG_LIST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_VIRTIO=m
-CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
#ifdef __KERNEL__
-#include <asm/reg.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
};
extern struct ppc64_caches ppc64_caches;
-
-static inline void logmpp(u64 x)
-{
- asm volatile(PPC_LOGMPP(R1) : : "r" (x));
-}
-
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
#if defined(__ASSEMBLY__)
#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */
#define EX_TLB_SRR0 (10 * 8)
#define EX_TLB_SRR1 (11 * 8)
+#define EX_TLB_R7 (12 * 8)
#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
-#define EX_TLB_R8 (12 * 8)
-#define EX_TLB_R9 (13 * 8)
-#define EX_TLB_LR (14 * 8)
-#define EX_TLB_SIZE (15 * 8)
+#define EX_TLB_R8 (13 * 8)
+#define EX_TLB_R9 (14 * 8)
+#define EX_TLB_LR (15 * 8)
+#define EX_TLB_SIZE (16 * 8)
#else
-#define EX_TLB_SIZE (12 * 8)
+#define EX_TLB_SIZE (13 * 8)
#endif
#define START_EXCEPTION(label) \
#endif
#define SET_IVOR(vector_number, vector_offset) \
- li r3,vector_offset@l; \
- ori r3,r3,interrupt_base_book3e@l; \
+ LOAD_REG_ADDR(r3,interrupt_base_book3e);\
+ ori r3,r3,vector_offset@l; \
mtspr SPRN_IVOR##vector_number,r3;
#endif /* _ASM_POWERPC_EXCEPTION_64E_H */
u32 arch_compat;
ulong pcr;
ulong dpdes; /* doorbell state (POWER8) */
- void *mpp_buffer; /* Micro Partition Prefetch buffer */
- bool mpp_buffer_is_valid;
ulong conferring_threads;
};
unsigned long addr,
unsigned char *hpte_slot_array,
int psize, int ssize, int local);
- /* special for kexec, to be called in real mode, linear mapping is
- * destroyed as well */
+ /*
+ * Special for kexec.
+ * To be called in real mode with interrupts disabled. No locks are
+ * taken as such, concurrent access on pre POWER5 hardware could result
+ * in a deadlock.
+ * The linear mapping is destroyed as well.
+ */
void (*hpte_clear_all)(void);
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
#include <asm/asm-compat.h>
#include <asm/page.h>
+#include <asm/bug.h>
/*
* This is necessary to get the definition of PGTABLE_RANGE which we
int mpc512x_cs_config(unsigned int cs, u32 val);
+/*
+ * SCLPC Module (LPB FIFO)
+ */
+struct mpc512x_lpbfifo {
+ u32 pkt_size; /* SCLPC Packet Size Register */
+ u32 start_addr; /* SCLPC Start Address Register */
+ u32 ctrl; /* SCLPC Control Register */
+ u32 enable; /* SCLPC Enable Register */
+ u32 reserved1;
+ u32 status; /* SCLPC Status Register */
+ u32 bytes_done; /* SCLPC Bytes Done Register */
+ u32 emb_sc; /* EMB Share Counter Register */
+ u32 emb_pc; /* EMB Pause Control Register */
+ u32 reserved2[7];
+ u32 data_word; /* LPC RX/TX FIFO Data Word Register */
+ u32 fifo_status; /* LPC RX/TX FIFO Status Register */
+ u32 fifo_ctrl; /* LPC RX/TX FIFO Control Register */
+ u32 fifo_alarm; /* LPC RX/TX FIFO Alarm Register */
+};
+
+#define MPC512X_SCLPC_START (1 << 31)
+#define MPC512X_SCLPC_CS(x) (((x) & 0x7) << 24)
+#define MPC512X_SCLPC_FLUSH (1 << 17)
+#define MPC512X_SCLPC_READ (1 << 16)
+#define MPC512X_SCLPC_DAI (1 << 8)
+#define MPC512X_SCLPC_BPT(x) ((x) & 0x3f)
+#define MPC512X_SCLPC_RESET (1 << 24)
+#define MPC512X_SCLPC_FIFO_RESET (1 << 16)
+#define MPC512X_SCLPC_ABORT_INT_ENABLE (1 << 9)
+#define MPC512X_SCLPC_NORM_INT_ENABLE (1 << 8)
+#define MPC512X_SCLPC_ENABLE (1 << 0)
+#define MPC512X_SCLPC_SUCCESS (1 << 24)
+#define MPC512X_SCLPC_FIFO_CTRL(x) (((x) & 0x7) << 24)
+#define MPC512X_SCLPC_FIFO_ALARM(x) ((x) & 0x3ff)
+
+enum lpb_dev_portsize {
+ LPB_DEV_PORTSIZE_UNDEFINED = 0,
+ LPB_DEV_PORTSIZE_1_BYTE = 1,
+ LPB_DEV_PORTSIZE_2_BYTES = 2,
+ LPB_DEV_PORTSIZE_4_BYTES = 4,
+ LPB_DEV_PORTSIZE_8_BYTES = 8
+};
+
+enum mpc512x_lpbfifo_req_dir {
+ MPC512X_LPBFIFO_REQ_DIR_READ,
+ MPC512X_LPBFIFO_REQ_DIR_WRITE
+};
+
+struct mpc512x_lpbfifo_request {
+ phys_addr_t dev_phys_addr; /* physical address of some device on LPB */
+ void *ram_virt_addr; /* virtual address of some region in RAM */
+ u32 size;
+ enum lpb_dev_portsize portsize;
+ enum mpc512x_lpbfifo_req_dir dir;
+ void (*callback)(struct mpc512x_lpbfifo_request *);
+};
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req);
+
#endif /* __ASM_POWERPC_MPC5121_H__ */
#define MPC512x_PSC_FIFO_FULL 0x2
#define MPC512x_PSC_FIFO_ALARM 0x4
#define MPC512x_PSC_FIFO_URERR 0x8
-#define MPC512x_PSC_FIFO_ORERR 0x01
-#define MPC512x_PSC_FIFO_MEMERROR 0x02
struct mpc512x_psc_fifo {
u32 reserved1[10];
unsigned long *bitmap;
spinlock_t lock;
unsigned int irq_count;
+ bool bitmap_from_slab;
};
int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num);
#ifndef __ASSEMBLY__
#include <linux/types.h>
+#include <linux/kernel.h>
#else
#include <asm/types.h>
#endif
#endif
/* See Description below for VIRT_PHYS_OFFSET */
-#ifdef CONFIG_RELOCATABLE_PPC32
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
+#ifdef CONFIG_RELOCATABLE
#define VIRT_PHYS_OFFSET virt_phys_offset
#else
#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
#endif
-
+#endif
#ifdef CONFIG_PPC64
#define MEMORY_START 0UL
#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
#endif
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/*
* On Book-E parts we need __va to parse the device tree and we can't
* On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
* the other definitions for __va & __pa.
*/
-#ifdef CONFIG_BOOKE
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
#else
#endif
/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
+#define _ALIGN_UP(addr, size) __ALIGN_KERNEL(addr, size)
+#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1)))
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
#ifdef CONFIG_HUGETLB_PAGE
#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_64K_PAGES
+/*
+ * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
+ * need to setup hugepage directory for them. Our pte and page directory format
+ * enable us to have this enabled. But to avoid errors when implementing new
+ * features disable hugepd for 64K. We enable a debug version here, So we catch
+ * wrong usage.
+ */
+#ifdef CONFIG_DEBUG_VM
+extern int hugepd_ok(hugepd_t hpd);
+#else
+#define hugepd_ok(x) (0)
+#endif
+#else
static inline int hugepd_ok(hugepd_t hpd)
{
/*
*/
return (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
}
+#endif
#else
static inline int hugepd_ok(hugepd_t hpd)
{
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
pmd_t *pmdp, unsigned long old_pmd);
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
}
extern int has_transparent_hugepage(void);
+#else
+static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
+ unsigned long addr, pmd_t *pmdp,
+ unsigned long old_pmd)
+{
+
+ WARN(1, "%s called with THP disabled\n", __func__);
+}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline int pmd_large(pmd_t pmd)
#define has_transparent_hugepage() 0
#endif
pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
- unsigned *shift);
+ bool *is_thp, unsigned *shift);
static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
- unsigned *shift)
+ bool *is_thp, unsigned *shift)
{
if (!arch_irqs_disabled()) {
pr_info("%s called with irq enabled\n", __func__);
dump_stack();
}
- return __find_linux_pte_or_hugepte(pgdir, ea, shift);
+ return __find_linux_pte_or_hugepte(pgdir, ea, is_thp, shift);
}
#endif /* __ASSEMBLY__ */
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
-#define PPC_INST_LOGMPP 0x7c0007e4
#define PPC_INST_LSWI 0x7c0004aa
#define PPC_INST_LSWX 0x7c00042a
#define PPC_INST_LWARX 0x7c000028
#define __PPC_EH(eh) 0
#endif
-/* POWER8 Micro Partition Prefetch (MPP) parameters */
-/* Address mask is common for LOGMPP instruction and MPPR SPR */
-#define PPC_MPPE_ADDRESS_MASK 0xffffffffc000ULL
-
-/* Bits 60 and 61 of MPP SPR should be set to one of the following */
-/* Aborting the fetch is indeed setting 00 in the table size bits */
-#define PPC_MPPR_FETCH_ABORT (0x0ULL << 60)
-#define PPC_MPPR_FETCH_WHOLE_TABLE (0x2ULL << 60)
-
-/* Bits 54 and 55 of register for LOGMPP instruction should be set to: */
-#define PPC_LOGMPP_LOG_L2 (0x02ULL << 54)
-#define PPC_LOGMPP_LOG_L2L3 (0x01ULL << 54)
-#define PPC_LOGMPP_LOG_ABORT (0x03ULL << 54)
-
/* Deal with instructions that older assemblers aren't aware of */
#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
-#define PPC_LOGMPP(b) stringify_in_c(.long PPC_INST_LOGMPP | \
- __PPC_RB(b))
#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DAWR 0xB4
-#define SPRN_MPPR 0xB8 /* Micro Partition Prefetch Register */
#define SPRN_RPR 0xBA /* Relative Priority Register */
#define SPRN_CIABR 0xBB
#define CIABR_PRIV 0x3
PPC64ONLY(switch_endian)
SYSCALL_SPU(userfaultfd)
SYSCALL_SPU(membarrier)
+SYSCALL(semop)
+SYSCALL(semget)
+COMPAT_SYS(semctl)
+COMPAT_SYS(semtimedop)
+COMPAT_SYS(msgsnd)
+COMPAT_SYS(msgrcv)
+SYSCALL(msgget)
+COMPAT_SYS(msgctl)
+COMPAT_SYS(shmat)
+SYSCALL(shmdt)
+SYSCALL(shmget)
+COMPAT_SYS(shmctl)
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 366
+#define __NR_syscalls 378
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
return (val + c->high_bits) & ~rhs;
}
+static inline unsigned long zero_bytemask(unsigned long mask)
+{
+ return ~1ul << __fls(mask);
+}
+
#else
#ifdef CONFIG_64BIT
#define __NR_switch_endian 363
#define __NR_userfaultfd 364
#define __NR_membarrier 365
+#define __NR_semop 366
+#define __NR_semget 367
+#define __NR_semctl 368
+#define __NR_semtimedop 369
+#define __NR_msgsnd 370
+#define __NR_msgrcv 371
+#define __NR_msgget 372
+#define __NR_msgctl 373
+#define __NR_shmat 374
+#define __NR_shmdt 375
+#define __NR_shmget 376
+#define __NR_shmctl 377
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
#endif /* CONFIG_SMP */
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
-static void crash_kexec_wait_realmode(int cpu)
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
+static void __maybe_unused crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
int i;
}
#else
static inline void crash_kexec_wait_realmode(int cpu) {}
-#endif /* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
+#endif /* CONFIG_SMP && CONFIG_PPC64 */
/*
* Register a function to be called on shutdown. Only use this if you
dev->coherent_dma_mask = mask;
return 0;
}
-EXPORT_SYMBOL_GPL(dma_set_coherent_mask);
+EXPORT_SYMBOL(dma_set_coherent_mask);
#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
* worried about _PAGE_SPLITTING/collapse. Also we will not hit
* page table free, because of init_mm.
*/
- ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token, &hugepage_shift);
+ ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token,
+ NULL, &hugepage_shift);
if (!ptep)
return token;
WARN_ON(hugepage_shift);
*/
switch (function) {
case EEH_OPT_THAW_MMIO:
- active_flag = EEH_STATE_MMIO_ACTIVE;
+ active_flag = EEH_STATE_MMIO_ACTIVE | EEH_STATE_MMIO_ENABLED;
break;
case EEH_OPT_THAW_DMA:
active_flag = EEH_STATE_DMA_ACTIVE;
goto out;
/* Decrease PE's pass through count */
- atomic_dec(&edev->pe->pass_dev_cnt);
- WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
+ WARN_ON(atomic_dec_if_positive(&edev->pe->pass_dev_cnt) < 0);
eeh_pe_change_owner(edev->pe);
out:
mutex_unlock(&eeh_dev_mutex);
driver = eeh_pcid_get(dev);
if (driver) {
eeh_pcid_put(dev);
- if (driver->err_handler)
+ if (driver->err_handler &&
+ driver->err_handler->error_detected &&
+ driver->err_handler->slot_reset &&
+ driver->err_handler->resume)
return NULL;
}
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
- /* Clear frozen state */
- rc = eeh_clear_pe_frozen_state(pe, false);
- if (rc)
- return rc;
+ /*
+ * If it's PHB PE, the frozen state on all available PEs should have
+ * been cleared by the PHB reset. Otherwise, we unfreeze the PE and its
+ * child PEs because they might be in frozen state.
+ */
+ if (!(pe->type & EEH_PE_PHB)) {
+ rc = eeh_clear_pe_frozen_state(pe, false);
+ if (rc)
+ return rc;
+ }
/* Give the system 5 seconds to finish running the user-space
* hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
* to accomplish the reset. Each child gets a report of the
* status ... if any child can't handle the reset, then the entire
* slot is dlpar removed and added.
+ *
+ * When the PHB is fenced, we have to issue a reset to recover from
+ * the error. Override the result if necessary to have partially
+ * hotplug for this case.
*/
pr_info("EEH: Notify device drivers to shutdown\n");
eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+ if ((pe->type & EEH_PE_PHB) &&
+ result != PCI_ERS_RESULT_NONE &&
+ result != PCI_ERS_RESULT_NEED_RESET)
+ result = PCI_ERS_RESULT_NEED_RESET;
/* Get the current PCI slot state. This can take a long time,
* sometimes over 300 seconds for certain systems.
EXCEPTION_STUB(0x320, ehpriv)
EXCEPTION_STUB(0x340, lrat_error)
- .globl interrupt_end_book3e
-interrupt_end_book3e:
+ .globl __end_interrupts
+__end_interrupts:
/* Critical Input Interrupt */
START_EXCEPTION(critical_input);
beq+ 1f
LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
- LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ LOAD_REG_IMMEDIATE(r15,__end_interrupts)
cmpld cr0,r10,r14
cmpld cr1,r10,r15
blt+ cr0,1f
beq+ 1f
LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
- LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ LOAD_REG_IMMEDIATE(r15,__end_interrupts)
cmpld cr0,r10,r14
cmpld cr1,r10,r15
blt+ cr0,1f
* r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
*/
/* Now we branch the new virtual address mapped by this entry */
- LOAD_REG_IMMEDIATE(r6,2f)
+ bl 1f /* Find our address */
+1: mflr r6
+ addi r6,r6,(2f - 1b)
+ tovirt(r6,r6)
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
mtspr SPRN_SRR0,r6
mflr r28
b 3b
+ .globl init_core_book3e
init_core_book3e:
/* Establish the interrupt vector base */
- LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+ tovirt(r2,r2)
+ LOAD_REG_ADDR(r3, interrupt_base_book3e)
mtspr SPRN_IVPR,r3
sync
blr
#ifdef CONFIG_PPC_BOOK3E
_GLOBAL(fsl_secondary_thread_init)
+ mfspr r4,SPRN_BUCSR
+
/* Enable branch prediction */
lis r3,BUCSR_INIT@h
ori r3,r3,BUCSR_INIT@l
* number. There are two threads per core, so shift everything
* but the low bit right by two bits so that the cpu numbering is
* continuous.
+ *
+ * If the old value of BUCSR is non-zero, this thread has run
+ * before. Thus, we assume we are coming from kexec or a similar
+ * scenario, and PIR is already set to the correct value. This
+ * is a bit of a hack, but there are limited opportunities for
+ * getting information into the thread and the alternatives
+ * seemed like they'd be overkill. We can't tell just by looking
+ * at the old PIR value which state it's in, since the same value
+ * could be valid for one thread out of reset and for a different
+ * thread in Linux.
*/
+
mfspr r3, SPRN_PIR
+ cmpwi r4,0
+ bne 1f
rlwimi r3, r3, 30, 2, 30
mtspr SPRN_PIR, r3
+1:
#endif
_GLOBAL(generic_secondary_thread_init)
/* process relocations for the final address of the kernel */
lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
sldi r25,r25,32
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
+#endif
lwz r7,__run_at_load-_stext(r26)
+#if defined(CONFIG_PPC_BOOK3E)
+ tophys(r26,r26)
+#endif
cmplwi cr0,r7,1 /* flagged to stay where we are ? */
bne 1f
add r25,r25,r26
1: mr r3,r25
bl relocate
+#if defined(CONFIG_PPC_BOOK3E)
+ /* IVPR needs to be set after relocation. */
+ bl init_core_book3e
+#endif
#endif
/*
*/
li r3,0 /* target addr */
#ifdef CONFIG_PPC_BOOK3E
- tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */
+ tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */
#endif
mr. r4,r26 /* In some cases the loader may */
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r4,r4)
+#endif
beq 9f /* have already put us at zero */
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
-#ifdef CONFIG_PPC_BOOK3E
- tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
-#endif
#ifdef CONFIG_RELOCATABLE
/*
* variable __run_at_load, if it is set the kernel is treated as relocatable
* kernel, otherwise it will be moved to PHYSICAL_START
*/
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
+#endif
lwz r7,__run_at_load-_stext(r26)
cmplwi cr0,r7,1
bne 3f
+#ifdef CONFIG_PPC_BOOK3E
+ LOAD_REG_ADDR(r5, __end_interrupts)
+ LOAD_REG_ADDR(r11, _stext)
+ sub r5,r5,r11
+#else
/* just copy interrupts */
LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+#endif
b 5f
3:
#endif
* a page table free due to init_mm
*/
ptep = __find_linux_pte_or_hugepte(init_mm.pgd, vaddr,
- &hugepage_shift);
+ NULL, &hugepage_shift);
if (ptep == NULL)
paddr = 0;
else {
#include <asm/smp.h>
#include <asm/hw_breakpoint.h>
+#ifdef CONFIG_PPC_BOOK3E
+int default_machine_kexec_prepare(struct kimage *image)
+{
+ int i;
+ /*
+ * Since we use the kernel fault handlers and paging code to
+ * handle the virtual mode, we must make sure no destination
+ * overlaps kernel static data or bss.
+ */
+ for (i = 0; i < image->nr_segments; i++)
+ if (image->segment[i].mem < __pa(_end))
+ return -ETXTBSY;
+ return 0;
+}
+#else
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
return 0;
}
+#endif /* !CONFIG_PPC_BOOK3E */
static void copy_segments(unsigned long ind)
{
/* NOTREACHED */
}
+#ifndef CONFIG_PPC_BOOK3E
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
static unsigned long htab_size;
return 0;
}
late_initcall(export_htab_values);
+#endif /* !CONFIG_PPC_BOOK3E */
#include <asm/thread_info.h>
#include <asm/kexec.h>
#include <asm/ptrace.h>
+#include <asm/mmu.h>
.text
mtsrr1 r11
rfid
#else
+ /* Create TLB entry in book3e_secondary_core_init */
+ li r4,0
ba 0x60
#endif
#endif
#ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC_BOOK3E
+/*
+ * BOOK3E has no real MMU mode, so we have to setup the initial TLB
+ * for a core to identity map v:0 to p:0. This current implementation
+ * assumes that 1G is enough for kexec.
+ */
+kexec_create_tlb:
+ /*
+ * Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
+ * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
+ */
+ PPC_TLBILX_ALL(0,R0)
+ sync
+ isync
+
+ mfspr r10,SPRN_TLB1CFG
+ andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */
+ subi r10,r10,1 /* Last entry: no conflict with kernel text */
+ lis r9,MAS0_TLBSEL(1)@h
+ rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */
+
+/* Set up a temp identity mapping v:0 to p:0 and return to it. */
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+#define M_IF_NEEDED MAS2_M
+#else
+#define M_IF_NEEDED 0
+#endif
+ mtspr SPRN_MAS0,r9
+
+ lis r9,(MAS1_VALID|MAS1_IPROT)@h
+ ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+ mtspr SPRN_MAS1,r9
+
+ LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED)
+ mtspr SPRN_MAS2,r9
+
+ LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
+ mtspr SPRN_MAS3,r9
+ li r9,0
+ mtspr SPRN_MAS7,r9
+
+ tlbwe
+ isync
+ blr
+#endif
/* kexec_smp_wait(void)
*
* don't overwrite r3 here, it is live for kexec_wait above.
*/
real_mode: /* assume normal blr return */
+#ifdef CONFIG_PPC_BOOK3E
+ /* Create an identity mapping. */
+ b kexec_create_tlb
+#else
1: li r9,MSR_RI
li r10,MSR_DR|MSR_IR
mflr r11 /* return address to SRR0 */
mtspr SPRN_SRR1,r10
mtspr SPRN_SRR0,r11
rfid
-
+#endif
/*
* kexec_sequence(newstack, start, image, control, clear_all())
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
/* disable interrupts, we are overwriting kernel data next */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
mfmsr r3
rlwinm r3,r3,0,17,15
mtmsrd r3,1
+#endif
/* copy dest pages, flush whole dest image */
mr r3,r29
li r6,1
stw r6,kexec_flag-1b(5)
+#ifndef CONFIG_PPC_BOOK3E
/* clear out hardware hash page table and tlb */
#if !defined(_CALL_ELF) || _CALL_ELF != 2
ld r12,0(r27) /* deref function descriptor */
#endif
mtctr r12
bctrl /* ppc_md.hpte_clear_all(void); */
+#endif /* !CONFIG_PPC_BOOK3E */
/*
* kexec image calling is:
/* Create our OS partition */
new_part = kmalloc(sizeof(*new_part), GFP_KERNEL);
if (!new_part) {
- pr_err("nvram_create_os_partition: kmalloc failed\n");
+ pr_err("%s: kmalloc failed\n", __func__);
return -ENOMEM;
}
rc = nvram_write_header(new_part);
if (rc <= 0) {
- pr_err("nvram_create_os_partition: nvram_write_header "
- "failed (%d)\n", rc);
+ pr_err("%s: nvram_write_header failed (%d)\n", __func__, rc);
+ kfree(new_part);
return rc;
}
list_add_tail(&new_part->partition, &free_part->partition);
free_part->header.checksum = nvram_checksum(&free_part->header);
rc = nvram_write_header(free_part);
if (rc <= 0) {
- pr_err("nvram_create_os_partition: nvram_write_header "
- "failed (%d)\n", rc);
+ pr_err("%s: nvram_write_header failed (%d)\n",
+ __func__, rc);
return rc;
}
} else {
tmp_index += NVRAM_BLOCK_LEN) {
rc = ppc_md.nvram_write(nv_init_vals, NVRAM_BLOCK_LEN, &tmp_index);
if (rc <= 0) {
- pr_err("nvram_create_partition: nvram_write failed (%d)\n", rc);
+ pr_err("%s: nvram_write failed (%d)\n",
+ __func__, rc);
return rc;
}
}
-
+
return new_part->index + NVRAM_HEADER_LEN;
}
void __init allocate_pacas(void)
{
- int cpu, limit;
+ u64 limit;
+ int cpu;
+ limit = ppc64_rma_size;
+
+#ifdef CONFIG_PPC_BOOK3S_64
/*
* We can't take SLB misses on the paca, and we want to access them
* in real mode, so allocate them within the RMA and also within
* the first segment.
*/
- limit = min(0x10000000ULL, ppc64_rma_size);
+ limit = min(0x10000000ULL, limit);
+#endif
paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
if (phb->is_dynamic)
kfree(phb);
}
+EXPORT_SYMBOL_GPL(pcibios_free_controller);
/*
* The function is used to return the minimal alignment
int of_get_ibm_chip_id(struct device_node *np)
{
of_node_get(np);
- while(np) {
+ while (np) {
struct device_node *old = np;
- const __be32 *prop;
+ u32 chip_id;
- prop = of_get_property(np, "ibm,chip-id", NULL);
- if (prop) {
+ /*
+ * Skiboot may produce memory nodes that contain more than one
+ * cell in chip-id, we only read the first one here.
+ */
+ if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
of_node_put(np);
- return be32_to_cpup(prop);
+ return chip_id;
}
np = of_get_parent(np);
of_node_put(old);
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!rtas.entry)
+ return -EINVAL;
+
if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
return -EFAULT;
for_each_possible_cpu(cpu) {
int first = cpu_first_thread_sibling(cpu);
+ /*
+ * If we boot via kdump on a non-primary thread,
+ * make sure we point at the thread that actually
+ * set up this TLB.
+ */
+ if (cpu_first_thread_sibling(boot_cpuid) == first)
+ first = boot_cpuid;
+
paca[cpu].tcd_ptr = &paca[first].tcd;
/*
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+static bool use_spinloop(void)
+{
+ if (!IS_ENABLED(CONFIG_PPC_BOOK3E))
+ return true;
+
+ /*
+ * When book3e boots from kexec, the ePAPR spin table does
+ * not get used.
+ */
+ return of_property_read_bool(of_chosen, "linux,booted-from-kexec");
+}
+
void smp_release_cpus(void)
{
unsigned long *ptr;
int i;
+ if (!use_spinloop())
+ return;
+
DBG(" -> smp_release_cpus()\n");
/* All secondary cpus are spinning on a common spinloop, release them
* Freescale Book3e parts spin in a loop provided by firmware,
* so smp_release_cpus() does nothing for them
*/
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E)
+#if defined(CONFIG_SMP)
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
ccflags-y := -shared -fno-common -fno-builtin
ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
- $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=both)
asflags-y := -D__VDSO32__ -s
obj-y += vdso32_wrapper.o
#include <asm/vdso.h>
.text
+ .global __kernel_datapage_offset;
+__kernel_datapage_offset:
+ .long 0
+
V_FUNCTION_BEGIN(__get_datapage)
.cfi_startproc
/* We don't want that exposed or overridable as we want other objects
mflr r0
.cfi_register lr,r0
- bcl 20,31,1f
- .global __kernel_datapage_offset;
-__kernel_datapage_offset:
- .long 0
-1:
+ bcl 20,31,data_page_branch
+data_page_branch:
mflr r3
mtlr r0
+ addi r3, r3, __kernel_datapage_offset-data_page_branch
lwz r0,0(r3)
add r3,r0,r3
blr
ccflags-y := -shared -fno-common -fno-builtin
ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
- $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=both)
asflags-y := -D__VDSO64__ -s
obj-y += vdso64_wrapper.o
#include <asm/vdso.h>
.text
+.global __kernel_datapage_offset;
+__kernel_datapage_offset:
+ .long 0
+
V_FUNCTION_BEGIN(__get_datapage)
.cfi_startproc
/* We don't want that exposed or overridable as we want other objects
mflr r0
.cfi_register lr,r0
- bcl 20,31,1f
- .global __kernel_datapage_offset;
-__kernel_datapage_offset:
- .long 0
-1:
+ bcl 20,31,data_page_branch
+data_page_branch:
mflr r3
mtlr r0
+ addi r3, r3, __kernel_datapage_offset-data_page_branch
lwz r0,0(r3)
add r3,r0,r3
blr
*(.rela*)
}
#endif
+ /* .exit.data is discarded at runtime, not link time,
+ * to deal with references from .exit.text
+ */
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
/* freed after init ends here */
. = ALIGN(PAGE_SIZE);
*/
local_irq_save(flags);
ptep = find_linux_pte_or_hugepte(current->mm->pgd,
- hva, NULL);
+ hva, NULL, NULL);
if (ptep) {
pte = kvmppc_read_update_linux_pte(ptep, 1);
if (pte_write(pte))
#include <asm/reg.h>
#include <asm/cputable.h>
-#include <asm/cache.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
static DECLARE_BITMAP(default_enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
-#if defined(CONFIG_PPC_64K_PAGES)
-#define MPP_BUFFER_ORDER 0
-#elif defined(CONFIG_PPC_4K_PAGES)
-#define MPP_BUFFER_ORDER 3
-#endif
-
static int dynamic_mt_modes = 6;
module_param(dynamic_mt_modes, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dynamic_mt_modes, "Set of allowed dynamic micro-threading modes: 0 (= none), 2, 4, or 6 (= 2 or 4)");
vcore->kvm = kvm;
INIT_LIST_HEAD(&vcore->preempt_list);
- vcore->mpp_buffer_is_valid = false;
-
- if (cpu_has_feature(CPU_FTR_ARCH_207S))
- vcore->mpp_buffer = (void *)__get_free_pages(
- GFP_KERNEL|__GFP_ZERO,
- MPP_BUFFER_ORDER);
-
return vcore;
}
return 1;
}
-static void kvmppc_start_saving_l2_cache(struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = (phys_addr_t)virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_ABORT);
- logmpp(mpp_addr | PPC_LOGMPP_LOG_L2);
-
- vc->mpp_buffer_is_valid = true;
-}
-
-static void kvmppc_start_restoring_l2_cache(const struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- /* We must abort any in-progress save operations to ensure
- * the table is valid so that prefetch engine knows when to
- * stop prefetching. */
- logmpp(mpp_addr | PPC_LOGMPP_LOG_ABORT);
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_WHOLE_TABLE);
-}
-
/*
* A list of virtual cores for each physical CPU.
* These are vcores that could run but their runner VCPU tasks are
srcu_idx = srcu_read_lock(&vc->kvm->srcu);
- if (vc->mpp_buffer_is_valid)
- kvmppc_start_restoring_l2_cache(vc);
-
__kvmppc_vcore_entry();
- if (vc->mpp_buffer)
- kvmppc_start_saving_l2_cache(vc);
-
srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
spin_lock(&vc->lock);
{
long int i;
- for (i = 0; i < KVM_MAX_VCORES; ++i) {
- if (kvm->arch.vcores[i] && kvm->arch.vcores[i]->mpp_buffer) {
- struct kvmppc_vcore *vc = kvm->arch.vcores[i];
- free_pages((unsigned long)vc->mpp_buffer,
- MPP_BUFFER_ORDER);
- }
+ for (i = 0; i < KVM_MAX_VCORES; ++i)
kfree(kvm->arch.vcores[i]);
- }
kvm->arch.online_vcores = 0;
}
* So don't worry about THP collapse/split. Called
* Only in realmode, hence won't need irq_save/restore.
*/
- p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL);
+ p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL, NULL);
if (!p || !pte_present(*p))
return NULL;
addr = (pte_pfn(*p) << PAGE_SHIFT) | (addr & ~PAGE_MASK);
* retry via mmu_notifier_retry.
*/
if (realmode)
- ptep = __find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift);
+ ptep = __find_linux_pte_or_hugepte(pgdir, hva, NULL,
+ &hpage_shift);
else {
local_irq_save(irq_flags);
- ptep = find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift);
+ ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL,
+ &hpage_shift);
}
if (ptep) {
pte_t pte;
* can't run hence pfn won't change.
*/
local_irq_save(flags);
- ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL);
+ ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL, NULL);
if (ptep) {
pte_t pte = READ_ONCE(*ptep);
tlbcam_addrs[index].start = virt;
tlbcam_addrs[index].limit = virt + size - 1;
tlbcam_addrs[index].phys = phys;
-
- loadcam_entry(index);
}
unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
}
static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
- unsigned long ram, int max_cam_idx)
+ unsigned long ram, int max_cam_idx,
+ bool dryrun)
{
int i;
unsigned long amount_mapped = 0;
unsigned long cam_sz;
cam_sz = calc_cam_sz(ram, virt, phys);
- settlbcam(i, virt, phys, cam_sz, pgprot_val(PAGE_KERNEL_X), 0);
+ if (!dryrun)
+ settlbcam(i, virt, phys, cam_sz,
+ pgprot_val(PAGE_KERNEL_X), 0);
ram -= cam_sz;
amount_mapped += cam_sz;
virt += cam_sz;
phys += cam_sz;
}
+
+ if (dryrun)
+ return amount_mapped;
+
+ loadcam_multi(0, i, max_cam_idx);
tlbcam_index = i;
#ifdef CONFIG_PPC64
return amount_mapped;
}
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun)
{
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
- return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+ return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun);
}
#ifdef CONFIG_PPC32
ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
i = switch_to_as1();
- __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+ __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false);
restore_to_as0(i, 0, 0, 1);
pr_info("Memory CAM mapping: ");
n = switch_to_as1();
/* map a 64M area for the second relocation */
if (memstart_addr > start)
- map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+ map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+ false);
else
map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
- 0x4000000, CONFIG_LOWMEM_CAM_NUM);
+ 0x4000000, CONFIG_LOWMEM_CAM_NUM,
+ false);
restore_to_as0(n, offset, __va(dt_ptr), 1);
/* We should never reach here */
panic("Relocation error");
* be when they isi), and we are the only one left. We rely on our kernel
* mapping being 0xC0's and the hardware ignoring those two real bits.
*
+ * This must be called with interrupts disabled.
+ *
+ * Taking the native_tlbie_lock is unsafe here due to the possibility of
+ * lockdep being on. On pre POWER5 hardware, not taking the lock could
+ * cause deadlock. POWER5 and newer not taking the lock is fine. This only
+ * gets called during boot before secondary CPUs have come up and during
+ * crashdump and all bets are off anyway.
+ *
* TODO: add batching support when enabled. remember, no dynamic memory here,
* athough there is the control page available...
*/
static void native_hpte_clear(void)
{
unsigned long vpn = 0;
- unsigned long slot, slots, flags;
+ unsigned long slot, slots;
struct hash_pte *hptep = htab_address;
unsigned long hpte_v;
unsigned long pteg_count;
pteg_count = htab_hash_mask + 1;
- local_irq_save(flags);
-
- /* we take the tlbie lock and hold it. Some hardware will
- * deadlock if we try to tlbie from two processors at once.
- */
- raw_spin_lock(&native_tlbie_lock);
-
slots = pteg_count * HPTES_PER_GROUP;
for (slot = 0; slot < slots; slot++, hptep++) {
hpte_v = be64_to_cpu(hptep->v);
/*
- * Call __tlbie() here rather than tlbie() since we
- * already hold the native_tlbie_lock.
+ * Call __tlbie() here rather than tlbie() since we can't take the
+ * native_tlbie_lock.
*/
if (hpte_v & HPTE_V_VALID) {
hpte_decode(hptep, slot, &psize, &apsize, &ssize, &vpn);
}
asm volatile("eieio; tlbsync; ptesync":::"memory");
- raw_spin_unlock(&native_tlbie_lock);
- local_irq_restore(flags);
}
/*
unsigned long access, unsigned long trap,
unsigned long flags)
{
+ bool is_thp;
enum ctx_state prev_state = exception_enter();
pgd_t *pgdir;
unsigned long vsid;
#endif /* CONFIG_PPC_64K_PAGES */
/* Get PTE and page size from page tables */
- ptep = __find_linux_pte_or_hugepte(pgdir, ea, &hugeshift);
+ ptep = __find_linux_pte_or_hugepte(pgdir, ea, &is_thp, &hugeshift);
if (ptep == NULL || !pte_present(*ptep)) {
DBG_LOW(" no PTE !\n");
rc = 1;
}
if (hugeshift) {
- if (pmd_trans_huge(*(pmd_t *)ptep))
+ if (is_thp)
rc = __hash_page_thp(ea, access, vsid, (pmd_t *)ptep,
trap, flags, ssize, psize);
#ifdef CONFIG_HUGETLB_PAGE
* THP pages use update_mmu_cache_pmd. We don't do
* hash preload there. Hence can ignore THP here
*/
- ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugepage_shift);
+ ptep = find_linux_pte_or_hugepte(pgdir, ea, NULL, &hugepage_shift);
if (!ptep)
goto out_exit;
*/
return ((pgd_val(pgd) & 0x3) != 0x0);
}
+
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_DEBUG_VM)
+/*
+ * This enables us to catch the wrong page directory format
+ * Moved here so that we can use WARN() in the call.
+ */
+int hugepd_ok(hugepd_t hpd)
+{
+ bool is_hugepd;
+
+ /*
+ * We should not find this format in page directory, warn otherwise.
+ */
+ is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
+ WARN(is_hugepd, "Found wrong page directory format\n");
+ return 0;
+}
+#endif
+
#else
int pmd_huge(pmd_t pmd)
{
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
/* Only called for hugetlbfs pages, hence can ignore THP */
- return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL);
+ return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL, NULL);
}
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
+ bool is_thp;
pte_t *ptep, pte;
unsigned shift;
unsigned long mask, flags;
struct page *page = ERR_PTR(-EINVAL);
local_irq_save(flags);
- ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
+ ptep = find_linux_pte_or_hugepte(mm->pgd, address, &is_thp, &shift);
if (!ptep)
goto no_page;
pte = READ_ONCE(*ptep);
* Transparent hugepages are handled by generic code. We can skip them
* here.
*/
- if (!shift || pmd_trans_huge(__pmd(pte_val(pte))))
+ if (!shift || is_thp)
goto no_page;
if (!pte_present(pte)) {
*/
pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
- unsigned *shift)
+ bool *is_thp, unsigned *shift)
{
pgd_t pgd, *pgdp;
pud_t pud, *pudp;
if (shift)
*shift = 0;
+ if (is_thp)
+ *is_thp = false;
+
pgdp = pgdir + pgd_index(ea);
pgd = READ_ONCE(*pgdp);
/*
if (pmd_none(pmd))
return NULL;
- if (pmd_huge(pmd) || pmd_large(pmd)) {
+ if (pmd_trans_huge(pmd)) {
+ if (is_thp)
+ *is_thp = true;
+ ret_pte = (pte_t *) pmdp;
+ goto out;
+ }
+
+ if (pmd_huge(pmd)) {
ret_pte = (pte_t *) pmdp;
goto out;
} else if (is_hugepd(__hugepd(pmd_val(pmd))))
extern unsigned long mmu_mapin_ram(unsigned long top);
#elif defined(CONFIG_PPC_FSL_BOOK3E)
-extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx);
+extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
+ bool dryrun);
extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
phys_addr_t phys);
#ifdef CONFIG_PPC32
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
#endif
extern void loadcam_entry(unsigned int index);
+extern void loadcam_multi(int first_idx, int num, int tmp_idx);
struct tlbcam {
u32 MAS0;
/* Walk the device tree upwards, looking for an associativity id */
int of_node_to_nid(struct device_node *device)
{
- struct device_node *tmp;
int nid = -1;
of_node_get(device);
if (nid != -1)
break;
- tmp = device;
- device = of_get_parent(tmp);
- of_node_put(tmp);
+ device = of_get_next_parent(device);
}
of_node_put(device);
#include <asm/udbg.h>
#include <asm/code-patching.h>
+enum slb_index {
+ LINEAR_INDEX = 0, /* Kernel linear map (0xc000000000000000) */
+ VMALLOC_INDEX = 1, /* Kernel virtual map (0xd000000000000000) */
+ KSTACK_INDEX = 2, /* Kernel stack map */
+};
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
(((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
- unsigned long entry)
+ enum slb_index index)
{
- return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | entry;
+ return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | index;
}
static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
static inline void slb_shadow_update(unsigned long ea, int ssize,
unsigned long flags,
- unsigned long entry)
+ enum slb_index index)
{
+ struct slb_shadow *p = get_slb_shadow();
+
/*
* Clear the ESID first so the entry is not valid while we are
* updating it. No write barriers are needed here, provided
* we only update the current CPU's SLB shadow buffer.
*/
- get_slb_shadow()->save_area[entry].esid = 0;
- get_slb_shadow()->save_area[entry].vsid =
- cpu_to_be64(mk_vsid_data(ea, ssize, flags));
- get_slb_shadow()->save_area[entry].esid =
- cpu_to_be64(mk_esid_data(ea, ssize, entry));
+ p->save_area[index].esid = 0;
+ p->save_area[index].vsid = cpu_to_be64(mk_vsid_data(ea, ssize, flags));
+ p->save_area[index].esid = cpu_to_be64(mk_esid_data(ea, ssize, index));
}
-static inline void slb_shadow_clear(unsigned long entry)
+static inline void slb_shadow_clear(enum slb_index index)
{
- get_slb_shadow()->save_area[entry].esid = 0;
+ get_slb_shadow()->save_area[index].esid = 0;
}
static inline void create_shadowed_slbe(unsigned long ea, int ssize,
unsigned long flags,
- unsigned long entry)
+ enum slb_index index)
{
/*
* Updating the shadow buffer before writing the SLB ensures
* we don't get a stale entry here if we get preempted by PHYP
* between these two statements.
*/
- slb_shadow_update(ea, ssize, flags, entry);
+ slb_shadow_update(ea, ssize, flags, index);
asm volatile("slbmte %0,%1" :
: "r" (mk_vsid_data(ea, ssize, flags)),
- "r" (mk_esid_data(ea, ssize, entry))
+ "r" (mk_esid_data(ea, ssize, index))
: "memory" );
}
lflags = SLB_VSID_KERNEL | linear_llp;
vflags = SLB_VSID_KERNEL | vmalloc_llp;
- ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, 2);
+ ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, KSTACK_INDEX);
if ((ksp_esid_data & ~0xfffffffUL) <= PAGE_OFFSET) {
ksp_esid_data &= ~SLB_ESID_V;
ksp_vsid_data = 0;
- slb_shadow_clear(2);
+ slb_shadow_clear(KSTACK_INDEX);
} else {
/* Update stack entry; others don't change */
- slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, 2);
+ slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, KSTACK_INDEX);
ksp_vsid_data =
- be64_to_cpu(get_slb_shadow()->save_area[2].vsid);
+ be64_to_cpu(get_slb_shadow()->save_area[KSTACK_INDEX].vsid);
}
/* We need to do this all in asm, so we're sure we don't touch
unsigned long vflags;
vflags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmalloc_psize].sllp;
- slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+ slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX);
slb_flush_and_rebolt();
}
asm volatile("isync":::"memory");
asm volatile("slbmte %0,%0"::"r" (0) : "memory");
asm volatile("isync; slbia; isync":::"memory");
- create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, 0);
- create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+ create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, LINEAR_INDEX);
+ create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX);
/* For the boot cpu, we're running on the stack in init_thread_union,
* which is in the first segment of the linear mapping, and also
* get_paca()->kstack hasn't been initialized yet.
* For secondary cpus, we need to bolt the kernel stack entry now.
*/
- slb_shadow_clear(2);
+ slb_shadow_clear(KSTACK_INDEX);
if (raw_smp_processor_id() != boot_cpuid &&
(get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
create_shadowed_slbe(get_paca()->kstack,
- mmu_kernel_ssize, lflags, 2);
+ mmu_kernel_ssize, lflags, KSTACK_INDEX);
asm volatile("isync":::"memory");
}
void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
unsigned long end)
{
+ bool is_thp;
int hugepage_shift;
unsigned long flags;
local_irq_save(flags);
arch_enter_lazy_mmu_mode();
for (; start < end; start += PAGE_SIZE) {
- pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start,
+ pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start, &is_thp,
&hugepage_shift);
unsigned long pte;
if (ptep == NULL)
continue;
pte = pte_val(*ptep);
- if (hugepage_shift)
+ if (is_thp)
trace_hugepage_invalidate(start, pte);
if (!(pte & _PAGE_HASHPTE))
continue;
- if (unlikely(hugepage_shift && pmd_trans_huge(*(pmd_t *)pte)))
+ if (unlikely(is_thp))
hpte_do_hugepage_flush(mm, start, (pmd_t *)ptep, pte);
else
- hpte_need_flush(mm, start, ptep, pte, 0);
+ hpte_need_flush(mm, start, ptep, pte, hugepage_shift);
}
arch_leave_lazy_mmu_mode();
local_irq_restore(flags);
ld r14,PACAPGD(r13)
std r15,EX_TLB_R15(r12)
std r10,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ std r7,EX_TLB_R7(r12)
+#endif
TLB_MISS_PROLOG_STATS
.endm
.macro tlb_epilog_bolted
ld r14,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ ld r7,EX_TLB_R7(r12)
+#endif
ld r10,EX_TLB_R10(r12)
ld r11,EX_TLB_R11(r12)
ld r13,EX_TLB_R13(r12)
* r13 = PACA
* r11 = tlb_per_core ptr
* r10 = crap (free to use)
+ * r7 = esel_next
*/
tlb_miss_common_e6500:
crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */
bne 10b
b 1b
.previous
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
+
+ lbz r7,TCD_ESEL_NEXT(r11)
+BEGIN_FTR_SECTION /* CPU_FTR_SMT */
/*
* Erratum A-008139 says that we can't use tlbwe to change
* an indirect entry in any way (including replacing or
* with tlbilx before overwriting.
*/
- lbz r15,TCD_ESEL_NEXT(r11)
- rlwinm r10,r15,16,0xff0000
+ rlwinm r10,r7,16,0xff0000
oris r10,r10,MAS0_TLBSEL(1)@h
mtspr SPRN_MAS0,r10
isync
mtspr SPRN_MAS2,r15
tlb_miss_huge_done_e6500:
- lbz r15,TCD_ESEL_NEXT(r11)
lbz r16,TCD_ESEL_MAX(r11)
lbz r14,TCD_ESEL_FIRST(r11)
- rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */
- addi r15,r15,1 /* increment esel_next */
+ rlwimi r10,r7,16,0x00ff0000 /* insert esel_next into MAS0 */
+ addi r7,r7,1 /* increment esel_next */
mtspr SPRN_MAS0,r10
- cmpw r15,r16
- iseleq r15,r14,r15 /* if next == last use first */
- stb r15,TCD_ESEL_NEXT(r11)
+ cmpw r7,r16
+ iseleq r7,r14,r7 /* if next == last use first */
+ stb r7,TCD_ESEL_NEXT(r11)
tlbwe
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/code-patching.h>
+#include <asm/cputhreads.h>
#include <asm/hugetlb.h>
#include <asm/paca.h>
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
unsigned int num_cams;
+ int __maybe_unused cpu = smp_processor_id();
+ bool map = true;
/* use a quarter of the TLBCAM for bolted linear map */
num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
- linear_map_top = map_mem_in_cams(linear_map_top, num_cams);
+
+ /*
+ * Only do the mapping once per core, or else the
+ * transient mapping would cause problems.
+ */
+#ifdef CONFIG_SMP
+ if (cpu != boot_cpuid &&
+ (cpu != cpu_first_thread_sibling(cpu) ||
+ cpu == cpu_first_thread_sibling(boot_cpuid)))
+ map = false;
+#endif
+
+ if (map)
+ linear_map_top = map_mem_in_cams(linear_map_top,
+ num_cams, false);
}
#endif
* entries are supported though that may eventually
* change.
*
- * on FSL Embedded 64-bit, we adjust the RMA size to match the
- * first bolted TLB entry size. We still limit max to 1G even if
- * the TLB could cover more. This is due to what the early init
- * code is setup to do.
+ * on FSL Embedded 64-bit, usually all RAM is bolted, but with
+ * unusual memory sizes it's possible for some RAM to not be mapped
+ * (such RAM is not used at all by Linux, since we don't support
+ * highmem on 64-bit). We limit ppc64_rma_size to what would be
+ * mappable if this memblock is the only one. Additional memblocks
+ * can only increase, not decrease, the amount that ends up getting
+ * mapped. We still limit max to 1G even if we'll eventually map
+ * more. This is due to what the early init code is set up to do.
*
* We crop it to the size of the first MEMBLOCK to
* avoid going over total available memory just in case...
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
unsigned long linear_sz;
- linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET,
- first_memblock_base);
+ unsigned int num_cams;
+
+ /* use a quarter of the TLBCAM for bolted linear map */
+ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+ linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
+ true);
+
ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
} else
#endif
* extern void loadcam_entry(unsigned int index)
*
* Load TLBCAM[index] entry in to the L2 CAM MMU
+ * Must preserve r7, r8, r9, and r10
*/
_GLOBAL(loadcam_entry)
mflr r5
tlbwe
isync
blr
+
+/*
+ * Load multiple TLB entries at once, using an alternate-space
+ * trampoline so that we don't have to care about whether the same
+ * TLB entry maps us before and after.
+ *
+ * r3 = first entry to write
+ * r4 = number of entries to write
+ * r5 = temporary tlb entry
+ */
+_GLOBAL(loadcam_multi)
+ mflr r8
+
+ /*
+ * Set up temporary TLB entry that is the same as what we're
+ * running from, but in AS=1.
+ */
+ bl 1f
+1: mflr r6
+ tlbsx 0,r8
+ mfspr r6,SPRN_MAS1
+ ori r6,r6,MAS1_TS
+ mtspr SPRN_MAS1,r6
+ mfspr r6,SPRN_MAS0
+ rlwimi r6,r5,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+ mr r7,r5
+ mtspr SPRN_MAS0,r6
+ isync
+ tlbwe
+ isync
+
+ /* Switch to AS=1 */
+ mfmsr r6
+ ori r6,r6,MSR_IS|MSR_DS
+ mtmsr r6
+ isync
+
+ mr r9,r3
+ add r10,r3,r4
+2: bl loadcam_entry
+ addi r9,r9,1
+ cmpw r9,r10
+ mr r3,r9
+ blt 2b
+
+ /* Return to AS=0 and clear the temporary entry */
+ mfmsr r6
+ rlwinm. r6,r6,0,~(MSR_IS|MSR_DS)
+ mtmsr r6
+ isync
+
+ li r6,0
+ mtspr SPRN_MAS1,r6
+ rlwinm r6,r7,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+ oris r6,r6,MAS0_TLBSEL(1)@h
+ mtspr SPRN_MAS0,r6
+ isync
+ tlbwe
+ isync
+
+ mtlr r8
+ blr
#endif
return -EFAULT;
local_irq_save(flags);
- ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift);
+ ptep = find_linux_pte_or_hugepte(pgdir, addr, NULL, &shift);
if (!ptep)
goto err_out;
if (!shift)
select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+config MPC512x_LPBFIFO
+ tristate "MPC512x LocalPlus Bus FIFO driver"
+ depends on PPC_MPC512x && MPC512X_DMA
+ help
+ Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC).
+
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
depends on PPC_MPC512x
obj-y += mpc512x_shared.o
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o
+obj-$(CONFIG_MPC512x_LPBFIFO) += mpc512x_lpbfifo.o
obj-$(CONFIG_PDM360NG) += pdm360ng.o
--- /dev/null
+/*
+ * The driver for Freescale MPC512x LocalPlus Bus FIFO
+ * (called SCLPC in the Reference Manual).
+ *
+ * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mpc5121.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+
+#define DRV_NAME "mpc512x_lpbfifo"
+
+struct cs_range {
+ u32 csnum;
+ u32 base; /* must be zero */
+ u32 addr;
+ u32 size;
+};
+
+static struct lpbfifo_data {
+ spinlock_t lock; /* for protecting lpbfifo_data */
+ phys_addr_t regs_phys;
+ resource_size_t regs_size;
+ struct mpc512x_lpbfifo __iomem *regs;
+ int irq;
+ struct cs_range *cs_ranges;
+ size_t cs_n;
+ struct dma_chan *chan;
+ struct mpc512x_lpbfifo_request *req;
+ dma_addr_t ram_bus_addr;
+ bool wait_lpbfifo_irq;
+ bool wait_lpbfifo_callback;
+} lpbfifo;
+
+/*
+ * A data transfer from RAM to some device on LPB is finished
+ * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback()
+ * have been called. We execute the callback registered in
+ * mpc512x_lpbfifo_request just after that.
+ * But for a data transfer from some device on LPB to RAM we don't enable
+ * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag
+ * automatically disables LPBFIFO reading request to the DMA controller
+ * and the data transfer hangs. So the callback registered in
+ * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback().
+ */
+
+/*
+ * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO
+ */
+static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param)
+{
+ struct device *dev = (struct device *)param;
+ struct mpc512x_lpbfifo_request *req = NULL;
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+
+ if (!lpbfifo.regs)
+ goto end;
+
+ req = lpbfifo.req;
+ if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) {
+ dev_err(dev, "bogus LPBFIFO IRQ\n");
+ goto end;
+ }
+
+ status = in_be32(&lpbfifo.regs->status);
+ if (status != MPC512X_SCLPC_SUCCESS) {
+ dev_err(dev, "DMA transfer from RAM to peripheral failed\n");
+ out_be32(&lpbfifo.regs->enable,
+ MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ goto end;
+ }
+ /* Clear the interrupt flag */
+ out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS);
+
+ lpbfifo.wait_lpbfifo_irq = false;
+
+ if (lpbfifo.wait_lpbfifo_callback)
+ goto end;
+
+ /* Transfer is finished, set the FIFO as idle */
+ lpbfifo.req = NULL;
+
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ if (req->callback)
+ req->callback(req);
+
+ return IRQ_HANDLED;
+
+ end:
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return IRQ_HANDLED;
+}
+
+/*
+ * mpc512x_lpbfifo_callback is called by DMA driver when
+ * DMA transaction is finished.
+ */
+static void mpc512x_lpbfifo_callback(void *param)
+{
+ unsigned long flags;
+ struct mpc512x_lpbfifo_request *req = NULL;
+ enum dma_data_direction dir;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+
+ if (!lpbfifo.regs) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return;
+ }
+
+ req = lpbfifo.req;
+ if (!req) {
+ pr_err("bogus LPBFIFO callback\n");
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return;
+ }
+
+ /* Release the mapping */
+ if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+ dir = DMA_TO_DEVICE;
+ else
+ dir = DMA_FROM_DEVICE;
+ dma_unmap_single(lpbfifo.chan->device->dev,
+ lpbfifo.ram_bus_addr, req->size, dir);
+
+ lpbfifo.wait_lpbfifo_callback = false;
+
+ if (!lpbfifo.wait_lpbfifo_irq) {
+ /* Transfer is finished, set the FIFO as idle */
+ lpbfifo.req = NULL;
+
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ if (req->callback)
+ req->callback(req);
+ } else {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ }
+}
+
+static int mpc512x_lpbfifo_kick(void)
+{
+ u32 bits;
+ bool no_incr = false;
+ u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */
+ u32 cs = 0;
+ size_t i;
+ struct dma_device *dma_dev = NULL;
+ struct scatterlist sg;
+ enum dma_data_direction dir;
+ struct dma_slave_config dma_conf = {};
+ struct dma_async_tx_descriptor *dma_tx = NULL;
+ dma_cookie_t cookie;
+ int ret;
+
+ /*
+ * 1. Fit the requirements:
+ * - the packet size must be a multiple of 4 since FIFO Data Word
+ * Register allows only full-word access according the Reference
+ * Manual;
+ * - the physical address of the device on LPB and the packet size
+ * must be aligned on BPT (bytes per transaction) or 8-bytes
+ * boundary according the Reference Manual;
+ * - but we choose DMA maxburst equal (or very close to) BPT to prevent
+ * DMA controller from overtaking FIFO and causing FIFO underflow
+ * error. So we force the packet size to be aligned on BPT boundary
+ * not to confuse DMA driver which requires the packet size to be
+ * aligned on maxburst boundary;
+ * - BPT should be set to the LPB device port size for operation with
+ * disabled auto-incrementing according Reference Manual.
+ */
+ if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4))
+ return -EINVAL;
+
+ if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) {
+ bpt = lpbfifo.req->portsize;
+ no_incr = true;
+ }
+
+ while (bpt > 1) {
+ if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) &&
+ IS_ALIGNED(lpbfifo.req->size, bpt)) {
+ break;
+ }
+
+ if (no_incr)
+ return -EINVAL;
+
+ bpt >>= 1;
+ }
+ dma_conf.dst_maxburst = max(bpt, 0x4u) / 4;
+ dma_conf.src_maxburst = max(bpt, 0x4u) / 4;
+
+ for (i = 0; i < lpbfifo.cs_n; i++) {
+ phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr;
+ phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size;
+ phys_addr_t access_start = lpbfifo.req->dev_phys_addr;
+ phys_addr_t access_end = access_start + lpbfifo.req->size;
+
+ if (access_start >= cs_start && access_end <= cs_end) {
+ cs = lpbfifo.cs_ranges[i].csnum;
+ break;
+ }
+ }
+ if (i == lpbfifo.cs_n)
+ return -EFAULT;
+
+ /* 2. Prepare DMA */
+ dma_dev = lpbfifo.chan->device;
+
+ if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) {
+ dir = DMA_TO_DEVICE;
+ dma_conf.direction = DMA_MEM_TO_DEV;
+ dma_conf.dst_addr = lpbfifo.regs_phys +
+ offsetof(struct mpc512x_lpbfifo, data_word);
+ } else {
+ dir = DMA_FROM_DEVICE;
+ dma_conf.direction = DMA_DEV_TO_MEM;
+ dma_conf.src_addr = lpbfifo.regs_phys +
+ offsetof(struct mpc512x_lpbfifo, data_word);
+ }
+ dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+ /* Make DMA channel work with LPB FIFO data register */
+ if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
+ ret = -EINVAL;
+ goto err_dma_prep;
+ }
+
+ sg_init_table(&sg, 1);
+
+ sg_dma_address(&sg) = dma_map_single(dma_dev->dev,
+ lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir);
+ if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg)))
+ return -EFAULT;
+
+ lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */
+
+ sg_dma_len(&sg) = lpbfifo.req->size;
+
+ dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg,
+ 1, dma_conf.direction, 0);
+ if (!dma_tx) {
+ ret = -ENOSPC;
+ goto err_dma_prep;
+ }
+ dma_tx->callback = mpc512x_lpbfifo_callback;
+ dma_tx->callback_param = NULL;
+
+ /* 3. Prepare FIFO */
+ out_be32(&lpbfifo.regs->enable,
+ MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ out_be32(&lpbfifo.regs->enable, 0x0);
+
+ /*
+ * Configure the watermarks for write operation (RAM->DMA->FIFO->dev):
+ * - high watermark 7 words according the Reference Manual,
+ * - low watermark 512 bytes (half of the FIFO).
+ * These watermarks don't work for read operation since the
+ * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual).
+ */
+ out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7));
+ out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200));
+
+ /*
+ * Start address is a physical address of the region which belongs
+ * to the device on the LocalPlus Bus
+ */
+ out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr);
+
+ /*
+ * Configure chip select, transfer direction, address increment option
+ * and bytes per transaction option
+ */
+ bits = MPC512X_SCLPC_CS(cs);
+ if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ)
+ bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH;
+ if (no_incr)
+ bits |= MPC512X_SCLPC_DAI;
+ bits |= MPC512X_SCLPC_BPT(bpt);
+ out_be32(&lpbfifo.regs->ctrl, bits);
+
+ /* Unmask irqs */
+ bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE;
+ if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+ bits |= MPC512X_SCLPC_NORM_INT_ENABLE;
+ else
+ lpbfifo.wait_lpbfifo_irq = false;
+
+ out_be32(&lpbfifo.regs->enable, bits);
+
+ /* 4. Set packet size and kick FIFO off */
+ bits = lpbfifo.req->size | MPC512X_SCLPC_START;
+ out_be32(&lpbfifo.regs->pkt_size, bits);
+
+ /* 5. Finally kick DMA off */
+ cookie = dma_tx->tx_submit(dma_tx);
+ if (dma_submit_error(cookie)) {
+ ret = -ENOSPC;
+ goto err_dma_submit;
+ }
+
+ return 0;
+
+ err_dma_submit:
+ out_be32(&lpbfifo.regs->enable,
+ MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ err_dma_prep:
+ dma_unmap_single(dma_dev->dev, sg_dma_address(&sg),
+ lpbfifo.req->size, dir);
+ return ret;
+}
+
+static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req)
+{
+ int ret = 0;
+
+ if (!lpbfifo.regs)
+ return -ENODEV;
+
+ /* Check whether a transfer is in progress */
+ if (lpbfifo.req)
+ return -EBUSY;
+
+ lpbfifo.wait_lpbfifo_irq = true;
+ lpbfifo.wait_lpbfifo_callback = true;
+ lpbfifo.req = req;
+
+ ret = mpc512x_lpbfifo_kick();
+ if (ret != 0)
+ lpbfifo.req = NULL; /* Set the FIFO as idle */
+
+ return ret;
+}
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ ret = mpc512x_lpbfifo_submit_locked(req);
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(mpc512x_lpbfifo_submit);
+
+/*
+ * LPBFIFO driver uses "ranges" property of "localbus" device tree node
+ * for being able to determine the chip select number of a client device
+ * ordering a DMA transfer.
+ */
+static int get_cs_ranges(struct device *dev)
+{
+ int ret = -ENODEV;
+ struct device_node *lb_node;
+ const u32 *addr_cells_p;
+ const u32 *size_cells_p;
+ int proplen;
+ size_t i;
+
+ lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus");
+ if (!lb_node)
+ return ret;
+
+ /*
+ * The node defined as compatible with 'fsl,mpc5121-localbus'
+ * should have two address cells and one size cell.
+ * Every item of its ranges property should consist of:
+ * - the first address cell which is the chipselect number;
+ * - the second address cell which is the offset in the chipselect,
+ * must be zero.
+ * - CPU address of the beginning of an access window;
+ * - the only size cell which is the size of an access window.
+ */
+ addr_cells_p = of_get_property(lb_node, "#address-cells", NULL);
+ size_cells_p = of_get_property(lb_node, "#size-cells", NULL);
+ if (addr_cells_p == NULL || *addr_cells_p != 2 ||
+ size_cells_p == NULL || *size_cells_p != 1) {
+ goto end;
+ }
+
+ proplen = of_property_count_u32_elems(lb_node, "ranges");
+ if (proplen <= 0 || proplen % 4 != 0)
+ goto end;
+
+ lpbfifo.cs_n = proplen / 4;
+ lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n,
+ sizeof(struct cs_range), GFP_KERNEL);
+ if (!lpbfifo.cs_ranges)
+ goto end;
+
+ if (of_property_read_u32_array(lb_node, "ranges",
+ (u32 *)lpbfifo.cs_ranges, proplen) != 0) {
+ goto end;
+ }
+
+ for (i = 0; i < lpbfifo.cs_n; i++) {
+ if (lpbfifo.cs_ranges[i].base != 0)
+ goto end;
+ }
+
+ ret = 0;
+
+ end:
+ of_node_put(lb_node);
+ return ret;
+}
+
+static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
+{
+ struct resource r;
+ int ret = 0;
+
+ memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
+ spin_lock_init(&lpbfifo.lock);
+
+ lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
+ if (lpbfifo.chan == NULL)
+ return -EPROBE_DEFER;
+
+ if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
+ dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ lpbfifo.regs_phys = r.start;
+ lpbfifo.regs_size = resource_size(&r);
+
+ if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys,
+ lpbfifo.regs_size, DRV_NAME)) {
+ dev_err(&pdev->dev, "unable to request region\n");
+ ret = -EBUSY;
+ goto err0;
+ }
+
+ lpbfifo.regs = devm_ioremap(&pdev->dev,
+ lpbfifo.regs_phys, lpbfifo.regs_size);
+ if (!lpbfifo.regs) {
+ dev_err(&pdev->dev, "mapping registers failed\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ out_be32(&lpbfifo.regs->enable,
+ MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+ if (get_cs_ranges(&pdev->dev) != 0) {
+ dev_err(&pdev->dev, "bad '/localbus' device tree node\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (lpbfifo.irq == NO_IRQ) {
+ dev_err(&pdev->dev, "mapping irq failed\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0,
+ DRV_NAME, &pdev->dev) != 0) {
+ dev_err(&pdev->dev, "requesting irq failed\n");
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ dev_info(&pdev->dev, "probe succeeded\n");
+ return 0;
+
+ err1:
+ irq_dispose_mapping(lpbfifo.irq);
+ err0:
+ dma_release_channel(lpbfifo.chan);
+ return ret;
+}
+
+static int mpc512x_lpbfifo_remove(struct platform_device *pdev)
+{
+ unsigned long flags;
+ struct dma_device *dma_dev = lpbfifo.chan->device;
+ struct mpc512x_lpbfifo __iomem *regs = NULL;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ regs = lpbfifo.regs;
+ lpbfifo.regs = NULL;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ dma_dev->device_terminate_all(lpbfifo.chan);
+ out_be32(®s->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+ free_irq(lpbfifo.irq, &pdev->dev);
+ irq_dispose_mapping(lpbfifo.irq);
+ dma_release_channel(lpbfifo.chan);
+
+ return 0;
+}
+
+static const struct of_device_id mpc512x_lpbfifo_match[] = {
+ { .compatible = "fsl,mpc512x-lpbfifo", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match);
+
+static struct platform_driver mpc512x_lpbfifo_driver = {
+ .probe = mpc512x_lpbfifo_probe,
+ .remove = mpc512x_lpbfifo_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mpc512x_lpbfifo_match,
+ },
+};
+
+module_platform_driver(mpc512x_lpbfifo_driver);
+
+MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>");
+MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver");
+MODULE_LICENSE("GPL v2");
{
struct mpc52xx_gpt_priv *gpt;
- gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
+ gpt = devm_kzalloc(&ofdev->dev, sizeof *gpt, GFP_KERNEL);
if (!gpt)
return -ENOMEM;
gpt->dev = &ofdev->dev;
gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
gpt->regs = of_iomap(ofdev->dev.of_node, 0);
- if (!gpt->regs) {
- kfree(gpt);
+ if (!gpt->regs)
return -ENOMEM;
- }
dev_set_drvdata(&ofdev->dev, gpt);
{ .compatible = "fsl,mpc5200-lpbfifo", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc52xx_lpbfifo_match);
static struct platform_driver mpc52xx_lpbfifo_driver = {
.driver = {
"fsl,T1042RDB",
"fsl,T1042RDB_PI",
"keymile,kmcoge4",
+ "varisys,CYRUS",
NULL
};
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
+/*
+ * Core reset may cause issues if using the proxy mode of MPIC.
+ * So, use the mixed mode of MPIC if enabling CPU hotplug.
+ *
+ * Likewise, problems have been seen with kexec when coreint is enabled.
+ */
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC)
+ .get_irq = mpic_get_irq,
+#else
.get_irq = mpic_get_coreint_irq,
+#endif
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#include <linux/of_device.h>
#include <linux/phy.h>
#include <linux/memblock.h>
+#include <linux/fsl/guts.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
-#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
* kind, whether express or implied.
*/
+#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/div64.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
-#include <asm/fsl_guts.h>
#include <asm/fsl_lbc.h>
#include "smp.h"
* kind, whether express or implied.
*/
+#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/div64.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
-#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
#include <linux/kexec.h>
#include <linux/highmem.h>
#include <linux/cpu.h>
+#include <linux/fsl/guts.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/mpic.h>
#include <asm/cacheflush.h>
#include <asm/dbell.h>
-#include <asm/fsl_guts.h>
#include <asm/code-patching.h>
#include <asm/cputhreads.h>
static void wake_hw_thread(void *info)
{
void fsl_secondary_thread_init(void);
- unsigned long imsr1, inia1;
+ unsigned long imsr, inia;
int nr = *(const int *)info;
- imsr1 = MSR_KERNEL;
- inia1 = *(unsigned long *)fsl_secondary_thread_init;
-
- mttmr(TMRN_IMSR1, imsr1);
- mttmr(TMRN_INIA1, inia1);
- mtspr(SPRN_TENS, TEN_THREAD(1));
+ imsr = MSR_KERNEL;
+ inia = *(unsigned long *)fsl_secondary_thread_init;
+
+ if (cpu_thread_in_core(nr) == 0) {
+ /* For when we boot on a secondary thread with kdump */
+ mttmr(TMRN_IMSR0, imsr);
+ mttmr(TMRN_INIA0, inia);
+ mtspr(SPRN_TENS, TEN_THREAD(0));
+ } else {
+ mttmr(TMRN_IMSR1, imsr);
+ mttmr(TMRN_INIA1, inia);
+ mtspr(SPRN_TENS, TEN_THREAD(1));
+ }
smp_generic_kick_cpu(nr);
}
smp_call_function_single(primary, wake_hw_thread, &nr, 0);
return 0;
+ } else if (cpu_thread_in_core(boot_cpuid) != 0 &&
+ cpu_first_thread_sibling(boot_cpuid) == nr) {
+ if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+ return -ENOENT;
+
+ smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
}
#endif
.cpu_disable = generic_cpu_disable,
.cpu_die = generic_cpu_die,
#endif
-#ifdef CONFIG_KEXEC
+#if defined(CONFIG_KEXEC) && !defined(CONFIG_PPC64)
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
#endif
};
#ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC32
atomic_t kexec_down_cpus = ATOMIC_INIT(0);
void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0,1);
}
+#else
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+ int cpu = smp_processor_id();
+ int sibling = cpu_last_thread_sibling(cpu);
+ bool notified = false;
+ int disable_cpu;
+ int disable_threadbit = 0;
+ long start = mftb();
+ long now;
+
+ local_irq_disable();
+ hard_irq_disable();
+ mpic_teardown_this_cpu(secondary);
+
+ if (cpu == crashing_cpu && cpu_thread_in_core(cpu) != 0) {
+ /*
+ * We enter the crash kernel on whatever cpu crashed,
+ * even if it's a secondary thread. If that's the case,
+ * disable the corresponding primary thread.
+ */
+ disable_threadbit = 1;
+ disable_cpu = cpu_first_thread_sibling(cpu);
+ } else if (sibling != crashing_cpu &&
+ cpu_thread_in_core(cpu) == 0 &&
+ cpu_thread_in_core(sibling) != 0) {
+ disable_threadbit = 2;
+ disable_cpu = sibling;
+ }
+
+ if (disable_threadbit) {
+ while (paca[disable_cpu].kexec_state < KEXEC_STATE_REAL_MODE) {
+ barrier();
+ now = mftb();
+ if (!notified && now - start > 1000000) {
+ pr_info("%s/%d: waiting for cpu %d to enter KEXEC_STATE_REAL_MODE (%d)\n",
+ __func__, smp_processor_id(),
+ disable_cpu,
+ paca[disable_cpu].kexec_state);
+ notified = true;
+ }
+ }
+
+ if (notified) {
+ pr_info("%s: cpu %d done waiting\n",
+ __func__, disable_cpu);
+ }
+
+ mtspr(SPRN_TENC, disable_threadbit);
+ while (mfspr(SPRN_TENSR) & disable_threadbit)
+ cpu_relax();
+ }
+}
+#endif
static void mpc85xx_smp_machine_kexec(struct kimage *image)
{
+#ifdef CONFIG_PPC32
int timeout = INT_MAX;
int i, num_cpus = num_present_cpus();
if ( i == smp_processor_id() ) continue;
mpic_reset_core(i);
}
+#endif
default_machine_kexec(image);
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/mpic.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of.h>
+#include <linux/fsl/guts.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/simple_gpio.h>
-#include <asm/fsl_guts.h>
#include "mpc86xx.h"
depends on PPC32 && PPC_BOOK3S
select PPC_HAVE_PMU_SUPPORT
-config TUNE_CELL
- bool "Optimize for Cell Broadband Engine"
- depends on PPC64 && PPC_BOOK3S
- help
- Cause the compiler to optimize for the PPE of the Cell Broadband
- Engine. This will make the code run considerably faster on Cell
- but somewhat slower on other machines. This option only changes
- the scheduling of instructions, not the selection of instructions
- itself, so the resulting kernel will keep running on all other
- machines.
-
# this is temp to handle compat with arch=ppc
config 8xx
bool
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
- depends on PPC64 && PPC_BOOK3S
+ depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
select PPC_CELL_NATIVE
select PPC_OF_PLATFORM_PCI
select PCI
config PPC_CELL_QPACE
bool "IBM Cell - QPACE"
- depends on PPC64 && PPC_BOOK3S
+ depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
select PPC_CELL_COMMON
config AXON_MSI
config PPC_MAPLE
- depends on PPC64 && PPC_BOOK3S
+ depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "Maple 970FX Evaluation Board"
select PCI
select MPIC
config PPC_PASEMI
- depends on PPC64 && PPC_BOOK3S
+ depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "PA Semi SoC-based platforms"
default n
select MPIC
config PPC_PMAC
bool "Apple PowerMac based machines"
- depends on PPC_BOOK3S
+ depends on PPC_BOOK3S && CPU_BIG_ENDIAN
select MPIC
select PCI
select PPC_INDIRECT_PCI if PPC32
static bool pnv_eeh_nb_init = false;
static int eeh_event_irq = -EINVAL;
-/**
- * pnv_eeh_init - EEH platform dependent initialization
- *
- * EEH platform dependent initialization on powernv
- */
static int pnv_eeh_init(void)
{
struct pci_controller *hose;
struct pnv_phb *phb;
- /* We require OPALv3 */
if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
pr_warn("%s: OPALv3 is required !\n",
__func__);
/*
* PE#0 should be regarded as valid by EEH core
* if it's not the reserved one. Currently, we
- * have the reserved PE#0 and PE#127 for PHB3
+ * have the reserved PE#255 and PE#127 for PHB3
* and P7IOC separately. So we should regard
- * PE#0 as valid for P7IOC.
+ * PE#0 as valid for PHB3 and P7IOC.
*/
if (phb->ioda.reserved_pe != 0)
eeh_add_flag(EEH_VALID_PE_ZERO);
#endif /* CONFIG_DEBUG_FS */
}
-
return ret;
}
-static int pnv_eeh_cap_start(struct pci_dn *pdn)
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
{
- u32 status;
+ int pos = PCI_CAPABILITY_LIST;
+ int cnt = 48; /* Maximal number of capabilities */
+ u32 status, id;
if (!pdn)
return 0;
+ /* Check if the device supports capabilities */
pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
if (!(status & PCI_STATUS_CAP_LIST))
return 0;
- return PCI_CAPABILITY_LIST;
-}
-
-static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
-{
- int pos = pnv_eeh_cap_start(pdn);
- int cnt = 48; /* Maximal number of capabilities */
- u32 id;
-
- if (!pos)
- return 0;
-
while (cnt--) {
pnv_pci_cfg_read(pdn, pos, 1, &pos);
if (pos < 0x40)
* that PE to block its config space.
*
* Broadcom Austin 4-ports NICs (14e4:1657)
+ * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
* Broadcom Shiner 2-ports 10G NICs (14e4:168e)
*/
if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
pdn->device_id == 0x1657) ||
+ (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+ pdn->device_id == 0x168a) ||
(pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
pdn->device_id == 0x168e))
edev->pe->state |= EEH_PE_CFG_RESTRICTED;
struct pci_controller *hose = pe->phb;
struct pnv_phb *phb = hose->private_data;
bool freeze_pe = false;
- int opt, ret = 0;
+ int opt;
s64 rc;
- /* Sanity check on option */
switch (option) {
case EEH_OPT_DISABLE:
return -EPERM;
return -EINVAL;
}
- /* If PHB supports compound PE, to handle it */
+ /* Freeze master and slave PEs if PHB supports compound PEs */
if (freeze_pe) {
if (phb->freeze_pe) {
phb->freeze_pe(phb, pe->addr);
- } else {
- rc = opal_pci_eeh_freeze_set(phb->opal_id,
- pe->addr, opt);
- if (rc != OPAL_SUCCESS) {
- pr_warn("%s: Failure %lld freezing "
- "PHB#%x-PE#%x\n",
- __func__, rc,
- phb->hose->global_number, pe->addr);
- ret = -EIO;
- }
+ return 0;
}
- } else {
- if (phb->unfreeze_pe) {
- ret = phb->unfreeze_pe(phb, pe->addr, opt);
- } else {
- rc = opal_pci_eeh_freeze_clear(phb->opal_id,
- pe->addr, opt);
- if (rc != OPAL_SUCCESS) {
- pr_warn("%s: Failure %lld enable %d "
- "for PHB#%x-PE#%x\n",
- __func__, rc, option,
- phb->hose->global_number, pe->addr);
- ret = -EIO;
- }
+
+ rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+ __func__, rc, phb->hose->global_number,
+ pe->addr);
+ return -EIO;
}
+
+ return 0;
}
- return ret;
+ /* Unfreeze master and slave PEs if PHB supports */
+ if (phb->unfreeze_pe)
+ return phb->unfreeze_pe(phb, pe->addr, opt);
+
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
+ __func__, rc, option, phb->hose->global_number,
+ pe->addr);
+ return -EIO;
+ }
+
+ return 0;
}
/**
struct pnv_phb *phb = hose->private_data;
s64 rc;
- /* Sanity check on error type */
if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
pr_warn("%s: Invalid error type %d\n",
* PRD component would have already got notified about this
* error through other channels.
*
- * In any case, let us just fall through. We anyway heading
- * down to panic path.
+ * If hardware marked this as an unrecoverable MCE, we are
+ * going to panic anyway. Even if it didn't, it's not safe to
+ * continue at this point, so we should explicitly panic.
*/
+
+ panic("PowerNV Unrecovered Machine Check");
return 0;
}
for_each_online_cpu(i) {
uint8_t status;
- int64_t rc;
+ int64_t rc, timeout = 1000;
if (i == my_cpu)
continue;
i, paca[i].hw_cpu_id);
notified = i;
}
+
+ /*
+ * On crash secondaries might be unreachable or hung,
+ * so timeout if we've waited too long
+ * */
+ mdelay(1);
+ if (timeout-- == 0) {
+ printk(KERN_ERR "kexec: timed out waiting for "
+ "cpu %d (physical %d) to enter OPAL\n",
+ i, paca[i].hw_cpu_id);
+ break;
+ }
}
}
}
/* Return the CPU to OPAL */
opal_return_cpu();
- } else if (crash_shutdown) {
- /*
- * On crash, we don't wait for secondaries to go
- * down as they might be unreachable or hung, so
- * instead we just wait a bit and move on.
- */
- mdelay(1);
} else {
/* Primary waits for the secondaries to have reached OPAL */
pnv_kexec_wait_secondaries_down();
* so clear LPCR:PECE1. We keep PECE2 enabled.
*/
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+
+ /*
+ * Hard-disable interrupts, and then clear irq_happened flags
+ * that we can safely ignore while off-line, since they
+ * are for things for which we do no processing when off-line
+ * (or in the case of HMI, all the processing we need to do
+ * is done in lower-level real-mode code).
+ */
+ hard_irq_disable();
+ local_paca->irq_happened &= ~(PACA_IRQ_DEC | PACA_IRQ_HMI);
+
while (!generic_check_cpu_restart(cpu)) {
+ /*
+ * Clear IPI flag, since we don't handle IPIs while
+ * offline, except for those when changing micro-threading
+ * mode, which are handled explicitly below, and those
+ * for coming online, which are handled via
+ * generic_check_cpu_restart() calls.
+ */
+ kvmppc_set_host_ipi(cpu, 0);
ppc64_runlatch_off();
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
- if ((srr1 & wmask) == SRR1_WAKEEE) {
+ if (((srr1 & wmask) == SRR1_WAKEEE) ||
+ (local_paca->irq_happened & PACA_IRQ_EE)) {
icp_native_flush_interrupt();
- local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
- smp_mb();
} else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
- kvmppc_set_host_ipi(cpu, 0);
}
+ local_paca->irq_happened &= ~(PACA_IRQ_EE | PACA_IRQ_DBELL);
+ smp_mb();
if (cpu_core_split_required())
continue;
- if (!generic_check_cpu_restart(cpu))
+ if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline !\n", cpu);
}
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
config PPC_PS3
bool "Sony PS3"
- depends on PPC64 && PPC_BOOK3S
+ depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
select PPC_CELL
select USB_OHCI_LITTLE_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO
.key = OS_AREA_DB_KEY_RTC_DIFF
};
-static const struct os_area_db_id os_area_db_id_video_mode = {
- .owner = OS_AREA_DB_OWNER_LINUX,
- .key = OS_AREA_DB_KEY_VIDEO_MODE
-};
-
#define SECONDS_FROM_1970_TO_2000 946684800LL
/**
select HAVE_PCSPKR_PLATFORM
select MPIC
select OF_DYNAMIC
+ select PCI
select PCI_MSI
select PPC_XICS
select PPC_ICP_NATIVE
select RTAS_ERROR_LOGGING
select PPC_UDBG_16550
select PPC_NATIVE
- select PPC_PCI_CHOICE if EXPERT
select PPC_DOORBELL
select HAVE_CONTEXT_TRACKING
select HOTPLUG_CPU if SMP
Say N if you are unsure.
-config PSERIES_MSI
- bool
- depends on PCI_MSI && PPC_PSERIES && EEH
- default y
-
config PSERIES_ENERGY
tristate "pSeries energy management capabilities driver"
depends on PPC_PSERIES
ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG
obj-y := lpar.o hvCall.o nvram.o reconfig.o \
+ of_helpers.o \
setup.o iommu.o event_sources.o ras.o \
- firmware.o power.o dlpar.o mobility.o rng.o
+ firmware.o power.o dlpar.o mobility.o rng.o \
+ pci.o pci_dlpar.o eeh_pseries.o msi.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SCANLOG) += scanlog.o
-obj-$(CONFIG_EEH) += eeh_pseries.o
obj-$(CONFIG_KEXEC) += kexec.o
-obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
-obj-$(CONFIG_PSERIES_MSI) += msi.o
obj-$(CONFIG_PSERIES_ENERGY) += pseries_energy.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/of.h>
+
+#include "of_helpers.h"
#include "offline_states.h"
#include "pseries.h"
return first_dn;
}
-static struct device_node *derive_parent(const char *path)
-{
- struct device_node *parent;
- char *last_slash;
-
- last_slash = strrchr(path, '/');
- if (last_slash == path) {
- parent = of_find_node_by_path("/");
- } else {
- char *parent_path;
- int parent_path_len = last_slash - path + 1;
- parent_path = kmalloc(parent_path_len, GFP_KERNEL);
- if (!parent_path)
- return NULL;
-
- strlcpy(parent_path, path, parent_path_len);
- parent = of_find_node_by_path(parent_path);
- kfree(parent_path);
- }
-
- return parent;
-}
-
int dlpar_attach_node(struct device_node *dn)
{
int rc;
- dn->parent = derive_parent(dn->full_name);
- if (!dn->parent)
- return -ENOMEM;
+ dn->parent = pseries_of_derive_parent(dn->full_name);
+ if (IS_ERR(dn->parent))
+ return PTR_ERR(dn->parent);
rc = of_attach_node(dn);
if (rc) {
return ret;
/* Parse the result out */
- result = 0;
- if (rets[1]) {
- switch(rets[0]) {
- case 0:
- result &= ~EEH_STATE_RESET_ACTIVE;
- result |= EEH_STATE_MMIO_ACTIVE;
- result |= EEH_STATE_DMA_ACTIVE;
- break;
- case 1:
- result |= EEH_STATE_RESET_ACTIVE;
- result |= EEH_STATE_MMIO_ACTIVE;
- result |= EEH_STATE_DMA_ACTIVE;
- break;
- case 2:
- result &= ~EEH_STATE_RESET_ACTIVE;
- result &= ~EEH_STATE_MMIO_ACTIVE;
- result &= ~EEH_STATE_DMA_ACTIVE;
- break;
- case 4:
- result &= ~EEH_STATE_RESET_ACTIVE;
- result &= ~EEH_STATE_MMIO_ACTIVE;
- result &= ~EEH_STATE_DMA_ACTIVE;
- result |= EEH_STATE_MMIO_ENABLED;
- break;
- case 5:
- if (rets[2]) {
- if (state) *state = rets[2];
- result = EEH_STATE_UNAVAILABLE;
- } else {
- result = EEH_STATE_NOT_SUPPORT;
- }
- break;
- default:
+ if (!rets[1])
+ return EEH_STATE_NOT_SUPPORT;
+
+ switch(rets[0]) {
+ case 0:
+ result = EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE;
+ break;
+ case 1:
+ result = EEH_STATE_RESET_ACTIVE |
+ EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE;
+ break;
+ case 2:
+ result = 0;
+ break;
+ case 4:
+ result = EEH_STATE_MMIO_ENABLED;
+ break;
+ case 5:
+ if (rets[2]) {
+ if (state) *state = rets[2];
+ result = EEH_STATE_UNAVAILABLE;
+ } else {
result = EEH_STATE_NOT_SUPPORT;
}
- } else {
+ break;
+ default:
result = EEH_STATE_NOT_SUPPORT;
}
int more = 1;
int retval;
- memset(pi_buff, 0x00, PAGE_SIZE);
/* invalid parameters */
if (!head || !pi_buff)
return -EINVAL;
+ memset(pi_buff, 0x00, PAGE_SIZE);
last_p_partition_ID = last_p_unit_address = ~0UL;
INIT_LIST_HEAD(head);
return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
}
-#ifdef CONFIG_PCI
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl)
return dma_iommu_ops.get_required_mask(dev);
}
-#else /* CONFIG_PCI */
-#define pci_dma_bus_setup_pSeries NULL
-#define pci_dma_dev_setup_pSeries NULL
-#define pci_dma_bus_setup_pSeriesLP NULL
-#define pci_dma_dev_setup_pSeriesLP NULL
-#define dma_set_mask_pSeriesLP NULL
-#define dma_get_required_mask_pSeriesLP NULL
-#endif /* !CONFIG_PCI */
-
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
--- /dev/null
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "of_helpers.h"
+
+/**
+ * pseries_of_derive_parent - basically like dirname(1)
+ * @path: the full_name of a node to be added to the tree
+ *
+ * Returns the node which should be the parent of the node
+ * described by path. E.g., for path = "/foo/bar", returns
+ * the node with full_name = "/foo".
+ */
+struct device_node *pseries_of_derive_parent(const char *path)
+{
+ struct device_node *parent;
+ char *parent_path = "/";
+ const char *tail = kbasename(path);
+
+ /* reject if path is "/" */
+ if (!strcmp(path, "/"))
+ return ERR_PTR(-EINVAL);
+
+ if (tail > path + 1) {
+ parent_path = kstrndup(path, tail - path, GFP_KERNEL);
+ if (!parent_path)
+ return ERR_PTR(-ENOMEM);
+ }
+ parent = of_find_node_by_path(parent_path);
+ if (strcmp(parent_path, "/"))
+ kfree(parent_path);
+ return parent ? parent : ERR_PTR(-EINVAL);
+}
--- /dev/null
+#ifndef _PSERIES_OF_HELPERS_H
+#define _PSERIES_OF_HELPERS_H
+
+#include <linux/of.h>
+
+struct device_node *pseries_of_derive_parent(const char *path);
+
+#endif /* _PSERIES_OF_HELPERS_H */
#include <asm/uaccess.h>
#include <asm/mmu.h>
-/**
- * derive_parent - basically like dirname(1)
- * @path: the full_name of a node to be added to the tree
- *
- * Returns the node which should be the parent of the node
- * described by path. E.g., for path = "/foo/bar", returns
- * the node with full_name = "/foo".
- */
-static struct device_node *derive_parent(const char *path)
-{
- struct device_node *parent = NULL;
- char *parent_path = "/";
- size_t parent_path_len = strrchr(path, '/') - path + 1;
-
- /* reject if path is "/" */
- if (!strcmp(path, "/"))
- return ERR_PTR(-EINVAL);
-
- if (strrchr(path, '/') != path) {
- parent_path = kmalloc(parent_path_len, GFP_KERNEL);
- if (!parent_path)
- return ERR_PTR(-ENOMEM);
- strlcpy(parent_path, path, parent_path_len);
- }
- parent = of_find_node_by_path(parent_path);
- if (!parent)
- return ERR_PTR(-EINVAL);
- if (strcmp(parent_path, "/"))
- kfree(parent_path);
- return parent;
-}
+#include "of_helpers.h"
static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
{
of_node_set_flag(np, OF_DYNAMIC);
of_node_init(np);
- np->parent = derive_parent(path);
+ np->parent = pseries_of_derive_parent(path);
if (IS_ERR(np->parent)) {
err = PTR_ERR(np->parent);
goto out_err;
return PCI_PROBE_NORMAL;
}
-#ifndef CONFIG_PCI
-void pSeries_final_fixup(void) { }
-#endif
-
struct pci_controller_ops pseries_pci_controller_ops = {
.probe_mode = pSeries_pci_probe_mode,
};
spin_lock_irqsave(&cpm_muram_lock, flags);
cpm_muram_info.alignment = align;
start = rh_alloc(&cpm_muram_info, size, "commproc");
- memset_io(cpm_muram_addr(start), 0, size);
+ if (!IS_ERR_VALUE(start))
+ memset_io(cpm_muram_addr(start), 0, size);
spin_unlock_irqrestore(&cpm_muram_lock, flags);
return start;
return i;
}
+static bool is_kdump(void)
+{
+ struct device_node *node;
+
+ node = of_find_node_by_type(NULL, "memory");
+ if (!node) {
+ WARN_ON_ONCE(1);
+ return false;
+ }
+
+ return of_property_read_bool(node, "linux,usable-memory");
+}
+
/* atmu setup for fsl pci/pcie controller */
static void setup_pci_atmu(struct pci_controller *hose)
{
const char *name = hose->dn->full_name;
const u64 *reg;
int len;
+ bool setup_inbound;
+
+ /*
+ * If this is kdump, we don't want to trigger a bunch of PCI
+ * errors by closing the window on in-flight DMA.
+ *
+ * We still run most of the function's logic so that things like
+ * hose->dma_window_size still get set.
+ */
+ setup_inbound = !is_kdump();
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
/* Disable all windows (except powar0 since it's ignored) */
for(i = 1; i < 5; i++)
out_be32(&pci->pow[i].powar, 0);
- for (i = start_idx; i < end_idx; i++)
- out_be32(&pci->piw[i].piwar, 0);
+
+ if (setup_inbound) {
+ for (i = start_idx; i < end_idx; i++)
+ out_be32(&pci->piw[i].piwar, 0);
+ }
/* Setup outbound MEM window */
for(i = 0, j = 1; i < 3; i++) {
/* Setup inbound mem window */
mem = memblock_end_of_DRAM();
+ pr_info("%s: end of DRAM %llx\n", __func__, mem);
/*
* The msi-address-64 property, if it exists, indicates the physical
piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
- /* Setup inbound memory window */
- out_be32(&pci->piw[win_idx].pitar, 0x00000000);
- out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
- out_be32(&pci->piw[win_idx].piwar, piwar);
- win_idx--;
+ if (setup_inbound) {
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+ }
+ win_idx--;
hose->dma_window_base_cur = 0x00000000;
hose->dma_window_size = (resource_size_t)sz;
piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
- /* Setup inbound memory window */
- out_be32(&pci->piw[win_idx].pitar, 0x00000000);
- out_be32(&pci->piw[win_idx].piwbear,
- pci64_dma_offset >> 44);
- out_be32(&pci->piw[win_idx].piwbar,
- pci64_dma_offset >> 12);
- out_be32(&pci->piw[win_idx].piwar, piwar);
+ if (setup_inbound) {
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwbear,
+ pci64_dma_offset >> 44);
+ out_be32(&pci->piw[win_idx].piwbar,
+ pci64_dma_offset >> 12);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+ }
/*
* install our own dma_set_mask handler to fixup dma_ops
} else {
u64 paddr = 0;
- /* Setup inbound memory window */
- out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
- out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
- out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1)));
- win_idx--;
+ if (setup_inbound) {
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwar,
+ (piwar | (mem_log - 1)));
+ }
+ win_idx--;
paddr += 1ull << mem_log;
sz -= 1ull << mem_log;
mem_log = ilog2(sz);
piwar |= (mem_log - 1);
- out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
- out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
- out_be32(&pci->piw[win_idx].piwar, piwar);
- win_idx--;
+ if (setup_inbound) {
+ out_be32(&pci->piw[win_idx].pitar,
+ paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwbar,
+ paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+ }
+ win_idx--;
paddr += 1ull << mem_log;
}
ret = probe_kernel_address(regs->nip, inst);
}
- if (mcheck_handle_load(regs, inst)) {
+ if (!ret && mcheck_handle_load(regs, inst)) {
regs->nip += 4;
return 1;
}
unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
{
- struct device_node *np;
const unsigned int *p_bus_freq = NULL;
of_node_get(node);
if (p_bus_freq)
break;
- np = of_get_parent(node);
- of_node_put(node);
- node = np;
+ node = of_get_next_parent(node);
}
of_node_put(node);
}
static struct irq_chip mpc8xx_pic = {
- .name = "MPC8XX SIU",
+ .name = "8XX SIU",
.irq_unmask = mpc8xx_unmask_irq,
.irq_mask = mpc8xx_mask_irq,
.irq_ack = mpc8xx_ack,
return IRQ_SET_MASK_OK_NOCOPY;
}
-static int mpic_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
- struct mpic *mpic = mpic_from_irq_data(d);
-
- if (!(mpic->flags & MPIC_FSL))
- return -ENXIO;
-
- if (on)
- desc->action->flags |= IRQF_NO_SUSPEND;
- else
- desc->action->flags &= ~IRQF_NO_SUSPEND;
-
- return 0;
-}
-
void mpic_set_vector(unsigned int virq, unsigned int vector)
{
struct mpic *mpic = mpic_from_irq(virq);
.irq_unmask = mpic_unmask_irq,
.irq_eoi = mpic_end_irq,
.irq_set_type = mpic_set_irq_type,
- .irq_set_wake = mpic_irq_set_wake,
};
#ifdef CONFIG_SMP
.irq_mask = mpic_mask_tm,
.irq_unmask = mpic_unmask_tm,
.irq_eoi = mpic_end_irq,
- .irq_set_wake = mpic_irq_set_wake,
};
#ifdef CONFIG_MPIC_U3_HT_IRQS
flags |= MPIC_NO_RESET;
if (of_get_property(node, "single-cpu-affinity", NULL))
flags |= MPIC_SINGLE_DEST_CPU;
- if (of_device_is_compatible(node, "fsl,mpic"))
+ if (of_device_is_compatible(node, "fsl,mpic")) {
flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
+ mpic_irq_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+ mpic_tm_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+ }
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
+#include <linux/bootmem.h>
#include <asm/msi_bitmap.h>
#include <asm/setup.h>
size = BITS_TO_LONGS(irq_count) * sizeof(long);
pr_debug("msi_bitmap: allocator bitmap size is 0x%x bytes\n", size);
- bmp->bitmap = zalloc_maybe_bootmem(size, GFP_KERNEL);
+ bmp->bitmap_from_slab = slab_is_available();
+ if (bmp->bitmap_from_slab)
+ bmp->bitmap = kzalloc(size, GFP_KERNEL);
+ else {
+ bmp->bitmap = memblock_virt_alloc(size, 0);
+ /* the bitmap won't be freed from memblock allocator */
+ kmemleak_not_leak(bmp->bitmap);
+ }
+
if (!bmp->bitmap) {
pr_debug("msi_bitmap: ENOMEM allocating allocator bitmap!\n");
return -ENOMEM;
void msi_bitmap_free(struct msi_bitmap *bmp)
{
- /* we can't free the bitmap we don't know if it's bootmem etc. */
+ if (bmp->bitmap_from_slab)
+ kfree(bmp->bitmap);
of_node_put(bmp->of_node);
bmp->bitmap = NULL;
}
/* Clients may WARN_ON bitmap == NULL for "not-allocated" */
WARN_ON(bmp.bitmap != NULL);
-
- kfree(bmp.bitmap);
}
static void __init test_of_node(void)
#include <asm/time.h>
#include "nonstdio.h"
+static bool paginating, paginate_skipping;
+static unsigned long paginate_lpp; /* Lines Per Page */
+static unsigned long paginate_pos;
-static int xmon_write(const void *ptr, int nb)
+void xmon_start_pagination(void)
{
- return udbg_write(ptr, nb);
+ paginating = true;
+ paginate_skipping = false;
+ paginate_pos = 0;
+}
+
+void xmon_end_pagination(void)
+{
+ paginating = false;
+}
+
+void xmon_set_pagination_lpp(unsigned long lpp)
+{
+ paginate_lpp = lpp;
}
static int xmon_readchar(void)
return -1;
}
+static int xmon_write(const char *ptr, int nb)
+{
+ int rv = 0;
+ const char *p = ptr, *q;
+ const char msg[] = "[Hit a key (a:all, q:truncate, any:next page)]";
+
+ if (nb <= 0)
+ return rv;
+
+ if (paginating && paginate_skipping)
+ return nb;
+
+ if (paginate_lpp) {
+ while (paginating && (q = strchr(p, '\n'))) {
+ rv += udbg_write(p, q - p + 1);
+ p = q + 1;
+ paginate_pos++;
+
+ if (paginate_pos >= paginate_lpp) {
+ udbg_write(msg, strlen(msg));
+
+ switch (xmon_readchar()) {
+ case 'a':
+ paginating = false;
+ break;
+ case 'q':
+ paginate_skipping = true;
+ break;
+ default:
+ /* nothing */
+ break;
+ }
+
+ paginate_pos = 0;
+ udbg_write("\r\n", 2);
+
+ if (paginate_skipping)
+ return nb;
+ }
+ }
+ }
+
+ return rv + udbg_write(p, nb - (p - ptr));
+}
+
int xmon_putchar(int c)
{
char ch = c;
#define printf xmon_printf
#define putchar xmon_putchar
+extern void xmon_set_pagination_lpp(unsigned long lpp);
+extern void xmon_start_pagination(void);
+extern void xmon_end_pagination(void);
extern int xmon_putchar(int c);
extern void xmon_puts(const char *);
extern char *xmon_gets(char *, int);
" u dump TLB\n"
#endif
" ? help\n"
+" # n limit output to n lines per page (for dp, dpa, dl)\n"
" zr reboot\n\
zh halt\n"
;
write_ciabr(0);
}
+static void set_lpp_cmd(void)
+{
+ unsigned long lpp;
+
+ if (!scanhex(&lpp)) {
+ printf("Invalid number.\n");
+ lpp = 0;
+ }
+ xmon_set_pagination_lpp(lpp);
+}
/* Command interpreting routine */
static char *last_cmd;
case '?':
xmon_puts(help_string);
break;
+ case '#':
+ set_lpp_cmd();
+ break;
case 'b':
bpt_cmds();
break;
static void dump_one_paca(int cpu)
{
struct paca_struct *p;
+#ifdef CONFIG_PPC_STD_MMU_64
+ int i = 0;
+#endif
if (setjmp(bus_error_jmp) != 0) {
printf("*** Error dumping paca for cpu 0x%x!\n", cpu);
printf("paca for cpu 0x%x @ %p:\n", cpu, p);
- printf(" %-*s = %s\n", 16, "possible", cpu_possible(cpu) ? "yes" : "no");
- printf(" %-*s = %s\n", 16, "present", cpu_present(cpu) ? "yes" : "no");
- printf(" %-*s = %s\n", 16, "online", cpu_online(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 20, "possible", cpu_possible(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
#define DUMP(paca, name, format) \
- printf(" %-*s = %#-*"format"\t(0x%lx)\n", 16, #name, 18, paca->name, \
+ printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
offsetof(struct paca_struct, name));
DUMP(p, lock_token, "x");
#ifdef CONFIG_PPC_BOOK3S_64
DUMP(p, mc_emergency_sp, "p");
DUMP(p, in_mce, "x");
+ DUMP(p, hmi_event_available, "x");
#endif
DUMP(p, data_offset, "lx");
DUMP(p, hw_cpu_id, "x");
DUMP(p, cpu_start, "x");
DUMP(p, kexec_state, "x");
+#ifdef CONFIG_PPC_STD_MMU_64
+ for (i = 0; i < SLB_NUM_BOLTED; i++) {
+ u64 esid, vsid;
+
+ if (!p->slb_shadow_ptr)
+ continue;
+
+ esid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].esid);
+ vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid);
+
+ if (esid || vsid) {
+ printf(" slb_shadow[%d]: = 0x%016lx 0x%016lx\n",
+ i, esid, vsid);
+ }
+ }
+ DUMP(p, vmalloc_sllp, "x");
+ DUMP(p, slb_cache_ptr, "x");
+ for (i = 0; i < SLB_CACHE_ENTRIES; i++)
+ printf(" slb_cache[%d]: = 0x%016lx\n", i, p->slb_cache[i]);
+#endif
+ DUMP(p, dscr_default, "llx");
+#ifdef CONFIG_PPC_BOOK3E
+ DUMP(p, pgd, "p");
+ DUMP(p, kernel_pgd, "p");
+ DUMP(p, tcd_ptr, "p");
+ DUMP(p, mc_kstack, "p");
+ DUMP(p, crit_kstack, "p");
+ DUMP(p, dbg_kstack, "p");
+#endif
DUMP(p, __current, "p");
DUMP(p, kstack, "lx");
DUMP(p, stab_rr, "lx");
DUMP(p, io_sync, "x");
DUMP(p, irq_work_pending, "x");
DUMP(p, nap_state_lost, "x");
+ DUMP(p, sprg_vdso, "llx");
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ DUMP(p, tm_scratch, "llx");
+#endif
+
+#ifdef CONFIG_PPC_POWERNV
+ DUMP(p, core_idle_state_ptr, "p");
+ DUMP(p, thread_idle_state, "x");
+ DUMP(p, thread_mask, "x");
+ DUMP(p, subcore_sibling_mask, "x");
+#endif
+ DUMP(p, user_time, "llx");
+ DUMP(p, system_time, "llx");
+ DUMP(p, user_time_scaled, "llx");
+ DUMP(p, starttime, "llx");
+ DUMP(p, starttime_user, "llx");
+ DUMP(p, startspurr, "llx");
+ DUMP(p, utime_sspurr, "llx");
+ DUMP(p, stolen_time, "llx");
#undef DUMP
catch_memory_errors = 0;
#ifdef CONFIG_PPC64
if (c == 'p') {
+ xmon_start_pagination();
dump_pacas();
+ xmon_end_pagination();
return;
}
#endif
sync();
kmsg_dump_rewind_nolock(&dumper);
+ xmon_start_pagination();
while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
buf[len] = '\0';
printf("%s", buf);
}
+ xmon_end_pagination();
sync();
/* wait a little while to see if we get a machine check */
select HAVE_ARCH_EARLY_PFN_TO_NID
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_SOFT_DIRTY
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
+#include <asm/diag.h>
#include <asm/ebcdic.h>
#include "hypfs.h"
/* Diagnose 204 functions */
-static int diag204(unsigned long subcode, unsigned long size, void *addr)
+static inline int __diag204(unsigned long subcode, unsigned long size, void *addr)
{
register unsigned long _subcode asm("0") = subcode;
register unsigned long _size asm("1") = size;
return _size;
}
+static int diag204(unsigned long subcode, unsigned long size, void *addr)
+{
+ diag_stat_inc(DIAG_STAT_X204);
+ return __diag204(subcode, size, addr);
+}
+
/*
* For the old diag subcode 4 with simple data format we have to use real
* memory. If we use subcode 6 or 7 with extended data format, we can (and
{
int rc = -EOPNOTSUPP;
+ diag_stat_inc(DIAG_STAT_X224);
asm volatile(
" diag %1,%2,0x224\n"
"0: lhi %0,0x0\n"
#include <linux/slab.h>
#include <linux/cpu.h>
+#include <asm/diag.h>
#include <asm/hypfs.h>
#include "hypfs.h"
*/
static void diag0c(struct hypfs_diag0c_entry *entry)
{
+ diag_stat_inc(DIAG_STAT_X00C);
asm volatile (
" sam31\n"
" diag %0,%0,0x0c\n"
#include <linux/types.h>
#include <linux/uaccess.h>
#include <asm/compat.h>
+#include <asm/diag.h>
#include <asm/sclp.h>
#include "hypfs.h"
#define DIAG304_CMD_MAX 2
-static unsigned long hypfs_sprp_diag304(void *data, unsigned long cmd)
+static inline unsigned long __hypfs_sprp_diag304(void *data, unsigned long cmd)
{
register unsigned long _data asm("2") = (unsigned long) data;
register unsigned long _rc asm("3");
return _rc;
}
+static unsigned long hypfs_sprp_diag304(void *data, unsigned long cmd)
+{
+ diag_stat_inc(DIAG_STAT_X304);
+ return __hypfs_sprp_diag304(data, cmd);
+}
+
static void hypfs_sprp_free(const void *data)
{
free_page((unsigned long) data);
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
+#include <asm/diag.h>
#include <asm/ebcdic.h>
#include <asm/timex.h>
#include "hypfs.h"
memset(parm_list.aci_grp, 0x40, NAME_LEN);
rc = -1;
+ diag_stat_inc(DIAG_STAT_X2FC);
asm volatile(
" diag %0,%1,0x2fc\n"
"0:\n"
#ifndef _ASM_S390_APPLDATA_H
#define _ASM_S390_APPLDATA_H
+#include <asm/diag.h>
#include <asm/io.h>
#define APPLDATA_START_INTERVAL_REC 0x80
parm_list.buffer_length = length;
parm_list.product_id_addr = (unsigned long) id;
parm_list.buffer_addr = virt_to_phys(buffer);
+ diag_stat_inc(DIAG_STAT_X0DC);
asm volatile(
" diag %1,%0,0xdc"
: "=d" (ry)
\
typecheck(atomic_t *, ptr); \
asm volatile( \
- __barrier \
op_string " %0,%2,%1\n" \
__barrier \
: "=d" (old_val), "+Q" ((ptr)->counter) \
\
typecheck(atomic64_t *, ptr); \
asm volatile( \
- __barrier \
op_string " %0,%2,%1\n" \
__barrier \
: "=d" (old_val), "+Q" ((ptr)->counter) \
#define mb() do { asm volatile(__ASM_BARRIER : : : "memory"); } while (0)
-#define rmb() mb()
-#define wmb() mb()
-#define dma_rmb() rmb()
-#define dma_wmb() wmb()
+#define rmb() barrier()
+#define wmb() barrier()
+#define dma_rmb() mb()
+#define dma_wmb() mb()
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
* big-endian system because, unlike little endian, the number of each
* bit depends on the word size.
*
- * The bitop functions are defined to work on unsigned longs, so for an
- * s390x system the bits end up numbered:
+ * The bitop functions are defined to work on unsigned longs, so the bits
+ * end up numbered:
* |63..............0|127............64|191...........128|255...........192|
- * and on s390:
- * |31.....0|63....32|95....64|127...96|159..128|191..160|223..192|255..224|
*
* There are a few little-endian macros used mostly for filesystem
- * bitmaps, these work on similar bit arrays layouts, but
- * byte-oriented:
+ * bitmaps, these work on similar bit array layouts, but byte-oriented:
* |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
*
- * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
- * number field needs to be reversed compared to the big-endian bit
- * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ * The main difference is that bit 3-5 in the bit number field needs to be
+ * reversed compared to the big-endian bit fields. This can be achieved by
+ * XOR with 0x38.
*
- * We also have special functions which work with an MSB0 encoding:
- * on an s390x system the bits are numbered:
+ * We also have special functions which work with an MSB0 encoding.
+ * The bits are numbered:
* |0..............63|64............127|128...........191|192...........255|
- * and on s390:
- * |0.....31|32....63|64....95|96...127|128..159|160..191|192..223|224..255|
*
- * The main difference is that bit 0-63 (64b) or 0-31 (32b) in the bit
- * number field needs to be reversed compared to the LSB0 encoded bit
- * fields. This can be achieved by XOR with 0x3f (64b) or 0x1f (32b).
+ * The main difference is that bit 0-63 in the bit number field needs to be
+ * reversed compared to the LSB0 encoded bit fields. This can be achieved by
+ * XOR with 0x3f.
*
*/
\
typecheck(unsigned long *, (__addr)); \
asm volatile( \
- __barrier \
__op_string " %0,%2,%1\n" \
__barrier \
: "=d" (__old), "+Q" (*(__addr)) \
return (*addr >> (nr & 7)) & 1;
}
+static inline int test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *ptr)
+{
+ if (test_bit(nr, ptr))
+ return 1;
+ return test_and_set_bit(nr, ptr);
+}
+
+static inline void clear_bit_unlock(unsigned long nr,
+ volatile unsigned long *ptr)
+{
+ smp_mb__before_atomic();
+ clear_bit(nr, ptr);
+}
+
+static inline void __clear_bit_unlock(unsigned long nr,
+ volatile unsigned long *ptr)
+{
+ smp_mb();
+ __clear_bit(nr, ptr);
+}
+
/*
* Functions which use MSB0 bit numbering.
- * On an s390x system the bits are numbered:
+ * The bits are numbered:
* |0..............63|64............127|128...........191|192...........255|
- * and on s390:
- * |0.....31|32....63|64....95|96...127|128..159|160..191|192..223|224..255|
*/
unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size);
unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size,
#include <asm-generic/bitops/ffz.h>
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic-setbit.h>
#define _ASM_S390_CIO_H_
#include <linux/spinlock.h>
+#include <linux/bitops.h>
#include <asm/types.h>
#define LPM_ANYPATH 0xff
return 0;
}
+/**
+ * pathmask_to_pos() - find the position of the left-most bit in a pathmask
+ * @mask: pathmask with at least one bit set
+ */
+static inline u8 pathmask_to_pos(u8 mask)
+{
+ return 8 - ffs(mask);
+}
+
void channel_subsystem_reinit(void);
extern void css_schedule_reprobe(void);
struct ccw_device;
extern int enable_cmf(struct ccw_device *cdev);
extern int disable_cmf(struct ccw_device *cdev);
+extern int __disable_cmf(struct ccw_device *cdev);
extern u64 cmf_read(struct ccw_device *cdev, int index);
extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data);
__old; \
})
-#define __cmpxchg_double_op(p1, p2, o1, o2, n1, n2, insn) \
+#define __cmpxchg_double(p1, p2, o1, o2, n1, n2) \
({ \
register __typeof__(*(p1)) __old1 asm("2") = (o1); \
register __typeof__(*(p2)) __old2 asm("3") = (o2); \
register __typeof__(*(p2)) __new2 asm("5") = (n2); \
int cc; \
asm volatile( \
- insn " %[old],%[new],%[ptr]\n" \
+ " cdsg %[old],%[new],%[ptr]\n" \
" ipm %[cc]\n" \
" srl %[cc],28" \
: [cc] "=d" (cc), [old] "+d" (__old1), "+d" (__old2) \
!cc; \
})
-#define __cmpxchg_double_4(p1, p2, o1, o2, n1, n2) \
- __cmpxchg_double_op(p1, p2, o1, o2, n1, n2, "cds")
-
-#define __cmpxchg_double_8(p1, p2, o1, o2, n1, n2) \
- __cmpxchg_double_op(p1, p2, o1, o2, n1, n2, "cdsg")
-
-extern void __cmpxchg_double_called_with_bad_pointer(void);
-
-#define __cmpxchg_double(p1, p2, o1, o2, n1, n2) \
-({ \
- int __ret; \
- switch (sizeof(*(p1))) { \
- case 4: \
- __ret = __cmpxchg_double_4(p1, p2, o1, o2, n1, n2); \
- break; \
- case 8: \
- __ret = __cmpxchg_double_8(p1, p2, o1, o2, n1, n2); \
- break; \
- default: \
- __cmpxchg_double_called_with_bad_pointer(); \
- } \
- __ret; \
-})
-
#define cmpxchg_double(p1, p2, o1, o2, n1, n2) \
({ \
__typeof__(p1) __p1 = (p1); \
BUILD_BUG_ON(sizeof(*(p1)) != sizeof(long)); \
BUILD_BUG_ON(sizeof(*(p2)) != sizeof(long)); \
VM_BUG_ON((unsigned long)((__p1) + 1) != (unsigned long)(__p2));\
- __cmpxchg_double_8(__p1, __p2, o1, o2, n1, n2); \
+ __cmpxchg_double(__p1, __p2, o1, o2, n1, n2); \
})
#define system_has_cmpxchg_double() 1
__ctl_load(reg, cr, cr);
}
-void __ctl_set_vx(void);
-
void smp_ctl_set_bit(int cr, int bit);
void smp_ctl_clear_bit(int cr, int bit);
#ifndef _ASM_S390_DIAG_H
#define _ASM_S390_DIAG_H
+#include <linux/percpu.h>
+
+enum diag_stat_enum {
+ DIAG_STAT_X008,
+ DIAG_STAT_X00C,
+ DIAG_STAT_X010,
+ DIAG_STAT_X014,
+ DIAG_STAT_X044,
+ DIAG_STAT_X064,
+ DIAG_STAT_X09C,
+ DIAG_STAT_X0DC,
+ DIAG_STAT_X204,
+ DIAG_STAT_X210,
+ DIAG_STAT_X224,
+ DIAG_STAT_X250,
+ DIAG_STAT_X258,
+ DIAG_STAT_X288,
+ DIAG_STAT_X2C4,
+ DIAG_STAT_X2FC,
+ DIAG_STAT_X304,
+ DIAG_STAT_X308,
+ DIAG_STAT_X500,
+ NR_DIAG_STAT
+};
+
+void diag_stat_inc(enum diag_stat_enum nr);
+void diag_stat_inc_norecursion(enum diag_stat_enum nr);
+
/*
* Diagnose 10: Release page range
*/
start_addr = start_pfn << PAGE_SHIFT;
end_addr = (start_pfn + num_pfn - 1) << PAGE_SHIFT;
+ diag_stat_inc(DIAG_STAT_X010);
asm volatile(
"0: diag %0,%1,0x10\n"
"1:\n"
#define ETR_PTFF_SGS 0x43 /* set gross steering rate */
/* Functions needed by the machine check handler */
-void etr_switch_to_local(void);
-void etr_sync_check(void);
+int etr_switch_to_local(void);
+int etr_sync_check(void);
+void etr_queue_work(void);
/* notifier for syncs */
extern struct atomic_notifier_head s390_epoch_delta_notifier;
} __attribute__ ((packed));
/* Functions needed by the machine check handler */
-void stp_sync_check(void);
-void stp_island_check(void);
+int stp_sync_check(void);
+int stp_island_check(void);
+void stp_queue_work(void);
#endif /* __S390_ETR_H */
--- /dev/null
+/*
+ * In-kernel FPU support functions
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ */
+
+#ifndef _ASM_S390_FPU_API_H
+#define _ASM_S390_FPU_API_H
+
+void save_fpu_regs(void);
+
+static inline int test_fp_ctl(u32 fpc)
+{
+ u32 orig_fpc;
+ int rc;
+
+ asm volatile(
+ " efpc %1\n"
+ " sfpc %2\n"
+ "0: sfpc %1\n"
+ " la %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "=d" (rc), "=d" (orig_fpc)
+ : "d" (fpc), "0" (-EINVAL));
+ return rc;
+}
+
+#endif /* _ASM_S390_FPU_API_H */
/*
- * General floating pointer and vector register helpers
+ * FPU state and register content conversion primitives
*
* Copyright IBM Corp. 2015
* Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
#ifndef _ASM_S390_FPU_INTERNAL_H
#define _ASM_S390_FPU_INTERNAL_H
-#define FPU_USE_VX 1 /* Vector extension is active */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/errno.h>
#include <linux/string.h>
-#include <asm/linkage.h>
#include <asm/ctl_reg.h>
-#include <asm/sigcontext.h>
-
-struct fpu {
- __u32 fpc; /* Floating-point control */
- __u32 flags;
- union {
- void *regs;
- freg_t *fprs; /* Floating-point register save area */
- __vector128 *vxrs; /* Vector register save area */
- };
-};
-
-void save_fpu_regs(void);
-
-#define is_vx_fpu(fpu) (!!((fpu)->flags & FPU_USE_VX))
-#define is_vx_task(tsk) (!!((tsk)->thread.fpu.flags & FPU_USE_VX))
-
-/* VX array structure for address operand constraints in inline assemblies */
-struct vx_array { __vector128 _[__NUM_VXRS]; };
-
-static inline int test_fp_ctl(u32 fpc)
-{
- u32 orig_fpc;
- int rc;
-
- asm volatile(
- " efpc %1\n"
- " sfpc %2\n"
- "0: sfpc %1\n"
- " la %0,0\n"
- "1:\n"
- EX_TABLE(0b,1b)
- : "=d" (rc), "=d" (orig_fpc)
- : "d" (fpc), "0" (-EINVAL));
- return rc;
-}
+#include <asm/fpu/types.h>
static inline void save_vx_regs_safe(__vector128 *vxrs)
{
static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
{
fpregs->pad = 0;
- if (is_vx_fpu(fpu))
+ if (MACHINE_HAS_VX)
convert_vx_to_fp((freg_t *)&fpregs->fprs, fpu->vxrs);
else
memcpy((freg_t *)&fpregs->fprs, fpu->fprs,
static inline void fpregs_load(_s390_fp_regs *fpregs, struct fpu *fpu)
{
- if (is_vx_fpu(fpu))
+ if (MACHINE_HAS_VX)
convert_fp_to_vx(fpu->vxrs, (freg_t *)&fpregs->fprs);
else
memcpy(fpu->fprs, (freg_t *)&fpregs->fprs,
sizeof(fpregs->fprs));
}
-#endif
-
#endif /* _ASM_S390_FPU_INTERNAL_H */
--- /dev/null
+/*
+ * FPU data structures
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ */
+
+#ifndef _ASM_S390_FPU_TYPES_H
+#define _ASM_S390_FPU_TYPES_H
+
+#include <asm/sigcontext.h>
+
+struct fpu {
+ __u32 fpc; /* Floating-point control */
+ union {
+ void *regs;
+ freg_t *fprs; /* Floating-point register save area */
+ __vector128 *vxrs; /* Vector register save area */
+ };
+};
+
+/* VX array structure for address operand constraints in inline assemblies */
+struct vx_array { __vector128 _[__NUM_VXRS]; };
+
+#endif /* _ASM_S390_FPU_TYPES_H */
extern struct device_attribute dev_attr_idle_count;
extern struct device_attribute dev_attr_idle_time_us;
+void psw_idle(struct s390_idle_data *, unsigned long);
+
#endif /* _S390_IDLE_H */
IRQ_SUBCLASS_SERVICE_SIGNAL = 9,
};
+#define CR0_IRQ_SUBCLASS_MASK \
+ ((1UL << (63 - 30)) /* Warning Track */ | \
+ (1UL << (63 - 48)) /* Malfunction Alert */ | \
+ (1UL << (63 - 49)) /* Emergency Signal */ | \
+ (1UL << (63 - 50)) /* External Call */ | \
+ (1UL << (63 - 52)) /* Clock Comparator */ | \
+ (1UL << (63 - 53)) /* CPU Timer */ | \
+ (1UL << (63 - 54)) /* Service Signal */ | \
+ (1UL << (63 - 57)) /* Interrupt Key */ | \
+ (1UL << (63 - 58)) /* Measurement Alert */ | \
+ (1UL << (63 - 59)) /* Timing Alert */ | \
+ (1UL << (63 - 62))) /* IUCV */
+
void irq_subclass_register(enum irq_subclass subclass);
void irq_subclass_unregister(enum irq_subclass subclass);
#include <linux/kvm.h>
#include <asm/debug.h>
#include <asm/cpu.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/api.h>
#include <asm/isc.h>
#define KVM_MAX_VCPUS 64
#define __S390_KVM_PARA_H
#include <uapi/asm/kvm_para.h>
+#include <asm/diag.h>
-
-
-static inline long kvm_hypercall0(unsigned long nr)
+static inline long __kvm_hypercall0(unsigned long nr)
{
register unsigned long __nr asm("1") = nr;
register long __rc asm("2");
return __rc;
}
-static inline long kvm_hypercall1(unsigned long nr, unsigned long p1)
+static inline long kvm_hypercall0(unsigned long nr)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall0(nr);
+}
+
+static inline long __kvm_hypercall1(unsigned long nr, unsigned long p1)
{
register unsigned long __nr asm("1") = nr;
register unsigned long __p1 asm("2") = p1;
return __rc;
}
-static inline long kvm_hypercall2(unsigned long nr, unsigned long p1,
+static inline long kvm_hypercall1(unsigned long nr, unsigned long p1)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall1(nr, p1);
+}
+
+static inline long __kvm_hypercall2(unsigned long nr, unsigned long p1,
unsigned long p2)
{
register unsigned long __nr asm("1") = nr;
return __rc;
}
-static inline long kvm_hypercall3(unsigned long nr, unsigned long p1,
+static inline long kvm_hypercall2(unsigned long nr, unsigned long p1,
+ unsigned long p2)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall2(nr, p1, p2);
+}
+
+static inline long __kvm_hypercall3(unsigned long nr, unsigned long p1,
unsigned long p2, unsigned long p3)
{
register unsigned long __nr asm("1") = nr;
return __rc;
}
+static inline long kvm_hypercall3(unsigned long nr, unsigned long p1,
+ unsigned long p2, unsigned long p3)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall3(nr, p1, p2, p3);
+}
-static inline long kvm_hypercall4(unsigned long nr, unsigned long p1,
+static inline long __kvm_hypercall4(unsigned long nr, unsigned long p1,
unsigned long p2, unsigned long p3,
unsigned long p4)
{
return __rc;
}
-static inline long kvm_hypercall5(unsigned long nr, unsigned long p1,
+static inline long kvm_hypercall4(unsigned long nr, unsigned long p1,
+ unsigned long p2, unsigned long p3,
+ unsigned long p4)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall4(nr, p1, p2, p3, p4);
+}
+
+static inline long __kvm_hypercall5(unsigned long nr, unsigned long p1,
unsigned long p2, unsigned long p3,
unsigned long p4, unsigned long p5)
{
return __rc;
}
-static inline long kvm_hypercall6(unsigned long nr, unsigned long p1,
+static inline long kvm_hypercall5(unsigned long nr, unsigned long p1,
+ unsigned long p2, unsigned long p3,
+ unsigned long p4, unsigned long p5)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall5(nr, p1, p2, p3, p4, p5);
+}
+
+static inline long __kvm_hypercall6(unsigned long nr, unsigned long p1,
unsigned long p2, unsigned long p3,
unsigned long p4, unsigned long p5,
unsigned long p6)
return __rc;
}
+static inline long kvm_hypercall6(unsigned long nr, unsigned long p1,
+ unsigned long p2, unsigned long p3,
+ unsigned long p4, unsigned long p5,
+ unsigned long p6)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __kvm_hypercall6(nr, p1, p2, p3, p4, p5, p6);
+}
+
/* kvm on s390 is always paravirtualization enabled */
static inline int kvm_para_available(void)
{
__u8 pad_0x00c4[0x00c8-0x00c4]; /* 0x00c4 */
__u32 stfl_fac_list; /* 0x00c8 */
__u8 pad_0x00cc[0x00e8-0x00cc]; /* 0x00cc */
- __u32 mcck_interruption_code[2]; /* 0x00e8 */
+ __u64 mcck_interruption_code; /* 0x00e8 */
__u8 pad_0x00f0[0x00f4-0x00f0]; /* 0x00f0 */
__u32 external_damage_code; /* 0x00f4 */
__u64 failing_storage_address; /* 0x00f8 */
/* Address space pointer. */
__u64 kernel_asce; /* 0x0358 */
__u64 user_asce; /* 0x0360 */
- __u64 current_pid; /* 0x0368 */
+
+ /*
+ * The lpp and current_pid fields form a
+ * 64-bit value that is set as program
+ * parameter with the LPP instruction.
+ */
+ __u32 lpp; /* 0x0368 */
+ __u32 current_pid; /* 0x036c */
/* SMP info area */
__u32 cpu_nr; /* 0x0370 */
#ifndef _ASM_S390_NMI_H
#define _ASM_S390_NMI_H
+#include <linux/const.h>
#include <linux/types.h>
-struct mci {
- __u32 sd : 1; /* 00 system damage */
- __u32 pd : 1; /* 01 instruction-processing damage */
- __u32 sr : 1; /* 02 system recovery */
- __u32 : 1; /* 03 */
- __u32 cd : 1; /* 04 timing-facility damage */
- __u32 ed : 1; /* 05 external damage */
- __u32 : 1; /* 06 */
- __u32 dg : 1; /* 07 degradation */
- __u32 w : 1; /* 08 warning pending */
- __u32 cp : 1; /* 09 channel-report pending */
- __u32 sp : 1; /* 10 service-processor damage */
- __u32 ck : 1; /* 11 channel-subsystem damage */
- __u32 : 2; /* 12-13 */
- __u32 b : 1; /* 14 backed up */
- __u32 : 1; /* 15 */
- __u32 se : 1; /* 16 storage error uncorrected */
- __u32 sc : 1; /* 17 storage error corrected */
- __u32 ke : 1; /* 18 storage-key error uncorrected */
- __u32 ds : 1; /* 19 storage degradation */
- __u32 wp : 1; /* 20 psw mwp validity */
- __u32 ms : 1; /* 21 psw mask and key validity */
- __u32 pm : 1; /* 22 psw program mask and cc validity */
- __u32 ia : 1; /* 23 psw instruction address validity */
- __u32 fa : 1; /* 24 failing storage address validity */
- __u32 vr : 1; /* 25 vector register validity */
- __u32 ec : 1; /* 26 external damage code validity */
- __u32 fp : 1; /* 27 floating point register validity */
- __u32 gr : 1; /* 28 general register validity */
- __u32 cr : 1; /* 29 control register validity */
- __u32 : 1; /* 30 */
- __u32 st : 1; /* 31 storage logical validity */
- __u32 ie : 1; /* 32 indirect storage error */
- __u32 ar : 1; /* 33 access register validity */
- __u32 da : 1; /* 34 delayed access exception */
- __u32 : 7; /* 35-41 */
- __u32 pr : 1; /* 42 tod programmable register validity */
- __u32 fc : 1; /* 43 fp control register validity */
- __u32 ap : 1; /* 44 ancillary report */
- __u32 : 1; /* 45 */
- __u32 ct : 1; /* 46 cpu timer validity */
- __u32 cc : 1; /* 47 clock comparator validity */
- __u32 : 16; /* 47-63 */
+#define MCCK_CODE_SYSTEM_DAMAGE _BITUL(63)
+#define MCCK_CODE_CPU_TIMER_VALID _BITUL(63 - 46)
+#define MCCK_CODE_PSW_MWP_VALID _BITUL(63 - 20)
+#define MCCK_CODE_PSW_IA_VALID _BITUL(63 - 23)
+
+#ifndef __ASSEMBLY__
+
+union mci {
+ unsigned long val;
+ struct {
+ u64 sd : 1; /* 00 system damage */
+ u64 pd : 1; /* 01 instruction-processing damage */
+ u64 sr : 1; /* 02 system recovery */
+ u64 : 1; /* 03 */
+ u64 cd : 1; /* 04 timing-facility damage */
+ u64 ed : 1; /* 05 external damage */
+ u64 : 1; /* 06 */
+ u64 dg : 1; /* 07 degradation */
+ u64 w : 1; /* 08 warning pending */
+ u64 cp : 1; /* 09 channel-report pending */
+ u64 sp : 1; /* 10 service-processor damage */
+ u64 ck : 1; /* 11 channel-subsystem damage */
+ u64 : 2; /* 12-13 */
+ u64 b : 1; /* 14 backed up */
+ u64 : 1; /* 15 */
+ u64 se : 1; /* 16 storage error uncorrected */
+ u64 sc : 1; /* 17 storage error corrected */
+ u64 ke : 1; /* 18 storage-key error uncorrected */
+ u64 ds : 1; /* 19 storage degradation */
+ u64 wp : 1; /* 20 psw mwp validity */
+ u64 ms : 1; /* 21 psw mask and key validity */
+ u64 pm : 1; /* 22 psw program mask and cc validity */
+ u64 ia : 1; /* 23 psw instruction address validity */
+ u64 fa : 1; /* 24 failing storage address validity */
+ u64 vr : 1; /* 25 vector register validity */
+ u64 ec : 1; /* 26 external damage code validity */
+ u64 fp : 1; /* 27 floating point register validity */
+ u64 gr : 1; /* 28 general register validity */
+ u64 cr : 1; /* 29 control register validity */
+ u64 : 1; /* 30 */
+ u64 st : 1; /* 31 storage logical validity */
+ u64 ie : 1; /* 32 indirect storage error */
+ u64 ar : 1; /* 33 access register validity */
+ u64 da : 1; /* 34 delayed access exception */
+ u64 : 7; /* 35-41 */
+ u64 pr : 1; /* 42 tod programmable register validity */
+ u64 fc : 1; /* 43 fp control register validity */
+ u64 ap : 1; /* 44 ancillary report */
+ u64 : 1; /* 45 */
+ u64 ct : 1; /* 46 cpu timer validity */
+ u64 cc : 1; /* 47 clock comparator validity */
+ u64 : 16; /* 47-63 */
+ };
};
struct pt_regs;
extern void s390_handle_mcck(void);
extern void s390_do_machine_check(struct pt_regs *regs);
+#endif /* __ASSEMBLY__ */
#endif /* _ASM_S390_NMI_H */
#define _PAGE_UNUSED 0x080 /* SW bit for pgste usage state */
#define __HAVE_ARCH_PTE_SPECIAL
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SOFT_DIRTY 0x002 /* SW pte soft dirty bit */
+#else
+#define _PAGE_SOFT_DIRTY 0x000
+#endif
+
/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL | _PAGE_DIRTY | \
- _PAGE_YOUNG)
+ _PAGE_YOUNG | _PAGE_SOFT_DIRTY)
/*
* handle_pte_fault uses pte_present and pte_none to find out the pte type
#define _SEGMENT_ENTRY_READ 0x0002 /* SW segment read bit */
#define _SEGMENT_ENTRY_WRITE 0x0001 /* SW segment write bit */
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _SEGMENT_ENTRY_SOFT_DIRTY 0x4000 /* SW segment soft dirty bit */
+#else
+#define _SEGMENT_ENTRY_SOFT_DIRTY 0x0000 /* SW segment soft dirty bit */
+#endif
+
/*
* Segment table entry encoding (R = read-only, I = invalid, y = young bit):
* dy..R...I...wr
}
#endif
+static inline int pte_soft_dirty(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_SOFT_DIRTY;
+}
+#define pte_swp_soft_dirty pte_soft_dirty
+
+static inline pte_t pte_mksoft_dirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_SOFT_DIRTY;
+ return pte;
+}
+#define pte_swp_mksoft_dirty pte_mksoft_dirty
+
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_SOFT_DIRTY;
+ return pte;
+}
+#define pte_swp_clear_soft_dirty pte_clear_soft_dirty
+
+static inline int pmd_soft_dirty(pmd_t pmd)
+{
+ return pmd_val(pmd) & _SEGMENT_ENTRY_SOFT_DIRTY;
+}
+
+static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
+{
+ pmd_val(pmd) |= _SEGMENT_ENTRY_SOFT_DIRTY;
+ return pmd;
+}
+
+static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
+{
+ pmd_val(pmd) &= ~_SEGMENT_ENTRY_SOFT_DIRTY;
+ return pmd;
+}
+
static inline pgste_t pgste_get_lock(pte_t *ptep)
{
unsigned long new = 0;
static inline pte_t pte_mkdirty(pte_t pte)
{
- pte_val(pte) |= _PAGE_DIRTY;
+ pte_val(pte) |= _PAGE_DIRTY | _PAGE_SOFT_DIRTY;
if (pte_val(pte) & _PAGE_WRITE)
pte_val(pte) &= ~_PAGE_PROTECT;
return pte;
pte_t entry, int dirty)
{
pgste_t pgste;
+ pte_t oldpte;
- if (pte_same(*ptep, entry))
+ oldpte = *ptep;
+ if (pte_same(oldpte, entry))
return 0;
if (mm_has_pgste(vma->vm_mm)) {
pgste = pgste_get_lock(ptep);
ptep_flush_direct(vma->vm_mm, address, ptep);
if (mm_has_pgste(vma->vm_mm)) {
- pgste_set_key(ptep, pgste, entry, vma->vm_mm);
+ if (pte_val(oldpte) & _PAGE_INVALID)
+ pgste_set_key(ptep, pgste, entry, vma->vm_mm);
pgste = pgste_set_pte(ptep, pgste, entry);
pgste_set_unlock(ptep, pgste);
} else
static inline pmd_t pmd_mkdirty(pmd_t pmd)
{
if (pmd_large(pmd)) {
- pmd_val(pmd) |= _SEGMENT_ENTRY_DIRTY;
+ pmd_val(pmd) |= _SEGMENT_ENTRY_DIRTY |
+ _SEGMENT_ENTRY_SOFT_DIRTY;
if (pmd_val(pmd) & _SEGMENT_ENTRY_WRITE)
pmd_val(pmd) &= ~_SEGMENT_ENTRY_PROTECT;
}
if (pmd_large(pmd)) {
pmd_val(pmd) &= _SEGMENT_ENTRY_ORIGIN_LARGE |
_SEGMENT_ENTRY_DIRTY | _SEGMENT_ENTRY_YOUNG |
- _SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_SPLIT;
+ _SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_SPLIT |
+ _SEGMENT_ENTRY_SOFT_DIRTY;
pmd_val(pmd) |= massage_pgprot_pmd(newprot);
if (!(pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY))
pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
#ifndef __ASM_S390_PROCESSOR_H
#define __ASM_S390_PROCESSOR_H
+#include <linux/const.h>
+
#define CIF_MCCK_PENDING 0 /* machine check handling is pending */
#define CIF_ASCE 1 /* user asce needs fixup / uaccess */
#define CIF_NOHZ_DELAY 2 /* delay HZ disable for a tick */
-#define CIF_FPU 3 /* restore vector registers */
+#define CIF_FPU 3 /* restore FPU registers */
+#define CIF_IGNORE_IRQ 4 /* ignore interrupt (for udelay) */
-#define _CIF_MCCK_PENDING (1<<CIF_MCCK_PENDING)
-#define _CIF_ASCE (1<<CIF_ASCE)
-#define _CIF_NOHZ_DELAY (1<<CIF_NOHZ_DELAY)
-#define _CIF_FPU (1<<CIF_FPU)
+#define _CIF_MCCK_PENDING _BITUL(CIF_MCCK_PENDING)
+#define _CIF_ASCE _BITUL(CIF_ASCE)
+#define _CIF_NOHZ_DELAY _BITUL(CIF_NOHZ_DELAY)
+#define _CIF_FPU _BITUL(CIF_FPU)
+#define _CIF_IGNORE_IRQ _BITUL(CIF_IGNORE_IRQ)
#ifndef __ASSEMBLY__
#include <asm/ptrace.h>
#include <asm/setup.h>
#include <asm/runtime_instr.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/types.h>
+#include <asm/fpu/internal.h>
static inline void set_cpu_flag(int flag)
{
- S390_lowcore.cpu_flags |= (1U << flag);
+ S390_lowcore.cpu_flags |= (1UL << flag);
}
static inline void clear_cpu_flag(int flag)
{
- S390_lowcore.cpu_flags &= ~(1U << flag);
+ S390_lowcore.cpu_flags &= ~(1UL << flag);
}
static inline int test_cpu_flag(int flag)
{
- return !!(S390_lowcore.cpu_flags & (1U << flag));
+ return !!(S390_lowcore.cpu_flags & (1UL << flag));
}
#define arch_needs_cpu() test_cpu_flag(CIF_NOHZ_DELAY)
#define ARCH_MIN_TASKALIGN 8
+extern __vector128 init_task_fpu_regs[__NUM_VXRS];
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) &init_stack, \
+ .fpu.regs = (void *)&init_task_fpu_regs, \
}
/*
* Set PSW mask to specified value, while leaving the
* PSW addr pointing to the next instruction.
*/
-static inline void __load_psw_mask (unsigned long mask)
+static inline void __load_psw_mask(unsigned long mask)
{
unsigned long addr;
psw_t psw;
return (((unsigned long) reg1) << 32) | ((unsigned long) reg2);
}
+static inline void local_mcck_enable(void)
+{
+ __load_psw_mask(__extract_psw() | PSW_MASK_MCHECK);
+}
+
+static inline void local_mcck_disable(void)
+{
+ __load_psw_mask(__extract_psw() & ~PSW_MASK_MCHECK);
+}
+
/*
* Rewind PSW instruction address by specified number of bytes.
*/
*/
static inline void __noreturn disabled_wait(unsigned long code)
{
- unsigned long ctl_buf;
- psw_t dw_psw;
-
- dw_psw.mask = PSW_MASK_BASE | PSW_MASK_WAIT | PSW_MASK_BA | PSW_MASK_EA;
- dw_psw.addr = code;
- /*
- * Store status and then load disabled wait psw,
- * the processor is dead afterwards
- */
- asm volatile(
- " stctg 0,0,0(%2)\n"
- " ni 4(%2),0xef\n" /* switch off protection */
- " lctlg 0,0,0(%2)\n"
- " lghi 1,0x1000\n"
- " stpt 0x328(1)\n" /* store timer */
- " stckc 0x330(1)\n" /* store clock comparator */
- " stpx 0x318(1)\n" /* store prefix register */
- " stam 0,15,0x340(1)\n"/* store access registers */
- " stfpc 0x31c(1)\n" /* store fpu control */
- " std 0,0x200(1)\n" /* store f0 */
- " std 1,0x208(1)\n" /* store f1 */
- " std 2,0x210(1)\n" /* store f2 */
- " std 3,0x218(1)\n" /* store f3 */
- " std 4,0x220(1)\n" /* store f4 */
- " std 5,0x228(1)\n" /* store f5 */
- " std 6,0x230(1)\n" /* store f6 */
- " std 7,0x238(1)\n" /* store f7 */
- " std 8,0x240(1)\n" /* store f8 */
- " std 9,0x248(1)\n" /* store f9 */
- " std 10,0x250(1)\n" /* store f10 */
- " std 11,0x258(1)\n" /* store f11 */
- " std 12,0x260(1)\n" /* store f12 */
- " std 13,0x268(1)\n" /* store f13 */
- " std 14,0x270(1)\n" /* store f14 */
- " std 15,0x278(1)\n" /* store f15 */
- " stmg 0,15,0x280(1)\n"/* store general registers */
- " stctg 0,15,0x380(1)\n"/* store control registers */
- " oi 0x384(1),0x10\n"/* fake protection bit */
- " lpswe 0(%1)"
- : "=m" (ctl_buf)
- : "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0", "1");
- while (1);
-}
+ psw_t psw;
-/*
- * Use to set psw mask except for the first byte which
- * won't be changed by this function.
- */
-static inline void
-__set_psw_mask(unsigned long mask)
-{
- __load_psw_mask(mask | (arch_local_save_flags() & ~(-1UL >> 8)));
+ psw.mask = PSW_MASK_BASE | PSW_MASK_WAIT | PSW_MASK_BA | PSW_MASK_EA;
+ psw.addr = code;
+ __load_psw(psw);
+ while (1);
}
-#define local_mcck_enable() \
- __set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK)
-#define local_mcck_disable() \
- __set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT)
-
/*
* Basic Machine Check/Program Check Handler.
*/
#ifndef _S390_PTRACE_H
#define _S390_PTRACE_H
+#include <linux/const.h>
#include <uapi/asm/ptrace.h>
#define PIF_SYSCALL 0 /* inside a system call */
#define PIF_PER_TRAP 1 /* deliver sigtrap on return to user */
-#define _PIF_SYSCALL (1<<PIF_SYSCALL)
-#define _PIF_PER_TRAP (1<<PIF_PER_TRAP)
+#define _PIF_SYSCALL _BITUL(PIF_SYSCALL)
+#define _PIF_PER_TRAP _BITUL(PIF_PER_TRAP)
#ifndef __ASSEMBLY__
static inline void set_pt_regs_flag(struct pt_regs *regs, int flag)
{
- regs->flags |= (1U << flag);
+ regs->flags |= (1UL << flag);
}
static inline void clear_pt_regs_flag(struct pt_regs *regs, int flag)
{
- regs->flags &= ~(1U << flag);
+ regs->flags &= ~(1UL << flag);
}
static inline int test_pt_regs_flag(struct pt_regs *regs, int flag)
{
- return !!(regs->flags & (1U << flag));
+ return !!(regs->flags & (1UL << flag));
}
/*
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
+#include <linux/const.h>
#include <uapi/asm/setup.h>
#define PARMAREA 0x10400
+/*
+ * Machine features detected in head.S
+ */
+
+#define MACHINE_FLAG_VM _BITUL(0)
+#define MACHINE_FLAG_IEEE _BITUL(1)
+#define MACHINE_FLAG_CSP _BITUL(2)
+#define MACHINE_FLAG_MVPG _BITUL(3)
+#define MACHINE_FLAG_DIAG44 _BITUL(4)
+#define MACHINE_FLAG_IDTE _BITUL(5)
+#define MACHINE_FLAG_DIAG9C _BITUL(6)
+#define MACHINE_FLAG_KVM _BITUL(8)
+#define MACHINE_FLAG_ESOP _BITUL(9)
+#define MACHINE_FLAG_EDAT1 _BITUL(10)
+#define MACHINE_FLAG_EDAT2 _BITUL(11)
+#define MACHINE_FLAG_LPAR _BITUL(12)
+#define MACHINE_FLAG_LPP _BITUL(13)
+#define MACHINE_FLAG_TOPOLOGY _BITUL(14)
+#define MACHINE_FLAG_TE _BITUL(15)
+#define MACHINE_FLAG_TLB_LC _BITUL(17)
+#define MACHINE_FLAG_VX _BITUL(18)
+#define MACHINE_FLAG_CAD _BITUL(19)
+
+#define LPP_MAGIC _BITUL(31)
+#define LPP_PFAULT_PID_MASK _AC(0xffffffff, UL)
+
#ifndef __ASSEMBLY__
#include <asm/lowcore.h>
extern void detect_memory_memblock(void);
-/*
- * Machine features detected in head.S
- */
-
-#define MACHINE_FLAG_VM (1UL << 0)
-#define MACHINE_FLAG_IEEE (1UL << 1)
-#define MACHINE_FLAG_CSP (1UL << 2)
-#define MACHINE_FLAG_MVPG (1UL << 3)
-#define MACHINE_FLAG_DIAG44 (1UL << 4)
-#define MACHINE_FLAG_IDTE (1UL << 5)
-#define MACHINE_FLAG_DIAG9C (1UL << 6)
-#define MACHINE_FLAG_KVM (1UL << 8)
-#define MACHINE_FLAG_ESOP (1UL << 9)
-#define MACHINE_FLAG_EDAT1 (1UL << 10)
-#define MACHINE_FLAG_EDAT2 (1UL << 11)
-#define MACHINE_FLAG_LPAR (1UL << 12)
-#define MACHINE_FLAG_LPP (1UL << 13)
-#define MACHINE_FLAG_TOPOLOGY (1UL << 14)
-#define MACHINE_FLAG_TE (1UL << 15)
-#define MACHINE_FLAG_TLB_LC (1UL << 17)
-#define MACHINE_FLAG_VX (1UL << 18)
-#define MACHINE_FLAG_CAD (1UL << 19)
-
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
#define MACHINE_IS_LPAR (S390_lowcore.machine_flags & MACHINE_FLAG_LPAR)
{
typecheck(unsigned int, lp->lock);
asm volatile(
- __ASM_BARRIER
"st %1,%0\n"
: "+Q" (lp->lock)
: "d" (0)
\
typecheck(unsigned int *, ptr); \
asm volatile( \
- "bcr 14,0\n" \
op_string " %0,%2,%1\n" \
: "=d" (old_val), "+Q" (*ptr) \
: "d" (op_val) \
rw->owner = 0;
asm volatile(
- __ASM_BARRIER
"st %1,%0\n"
: "+Q" (rw->lock)
: "d" (0)
#define __ASM_SWITCH_TO_H
#include <linux/thread_info.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/api.h>
#include <asm/ptrace.h>
extern struct task_struct *__switch_to(void *, void *);
#ifndef _ASM_THREAD_INFO_H
#define _ASM_THREAD_INFO_H
+#include <linux/const.h>
+
/*
* Size of kernel stack for each process
*/
#define TIF_BLOCK_STEP 20 /* This task is block stepped */
#define TIF_UPROBE_SINGLESTEP 21 /* This task is uprobe single stepped */
-#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1<<TIF_SECCOMP)
-#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_UPROBE (1<<TIF_UPROBE)
-#define _TIF_31BIT (1<<TIF_31BIT)
-#define _TIF_SINGLE_STEP (1<<TIF_SINGLE_STEP)
+#define _TIF_NOTIFY_RESUME _BITUL(TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING _BITUL(TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED _BITUL(TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE _BITUL(TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT _BITUL(TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP _BITUL(TIF_SECCOMP)
+#define _TIF_SYSCALL_TRACEPOINT _BITUL(TIF_SYSCALL_TRACEPOINT)
+#define _TIF_UPROBE _BITUL(TIF_UPROBE)
+#define _TIF_31BIT _BITUL(TIF_31BIT)
+#define _TIF_SINGLE_STEP _BITUL(TIF_SINGLE_STEP)
#define is_32bit_task() (test_thread_flag(TIF_31BIT))
--- /dev/null
+/*
+ * Tracepoint header for s390 diagnose calls
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM s390
+
+#if !defined(_TRACE_S390_DIAG_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_S390_DIAG_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH asm/trace
+#define TRACE_INCLUDE_FILE diag
+
+TRACE_EVENT(diagnose,
+ TP_PROTO(unsigned short nr),
+ TP_ARGS(nr),
+ TP_STRUCT__entry(
+ __field(unsigned short, nr)
+ ),
+ TP_fast_assign(
+ __entry->nr = nr;
+ ),
+ TP_printk("nr=0x%x", __entry->nr)
+);
+
+#ifdef CONFIG_TRACEPOINTS
+void trace_diagnose_norecursion(int diag_nr);
+#else
+static inline void trace_diagnose_norecursion(int diag_nr) { }
+#endif
+
+#endif /* _TRACE_S390_DIAG_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_cpum_cf.o perf_cpum_sf.o
obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf_events.o
+obj-$(CONFIG_TRACEPOINTS) += trace.o
+
# vdso
obj-y += vdso64/
obj-$(CONFIG_COMPAT) += vdso32/
int main(void)
{
- DEFINE(__TASK_thread_info, offsetof(struct task_struct, stack));
- DEFINE(__TASK_thread, offsetof(struct task_struct, thread));
- DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
+ /* task struct offsets */
+ OFFSET(__TASK_thread_info, task_struct, stack);
+ OFFSET(__TASK_thread, task_struct, thread);
+ OFFSET(__TASK_pid, task_struct, pid);
BLANK();
- DEFINE(__THREAD_ksp, offsetof(struct thread_struct, ksp));
- DEFINE(__THREAD_FPU_fpc, offsetof(struct thread_struct, fpu.fpc));
- DEFINE(__THREAD_FPU_flags, offsetof(struct thread_struct, fpu.flags));
- DEFINE(__THREAD_FPU_regs, offsetof(struct thread_struct, fpu.regs));
- DEFINE(__THREAD_per_cause, offsetof(struct thread_struct, per_event.cause));
- DEFINE(__THREAD_per_address, offsetof(struct thread_struct, per_event.address));
- DEFINE(__THREAD_per_paid, offsetof(struct thread_struct, per_event.paid));
- DEFINE(__THREAD_trap_tdb, offsetof(struct thread_struct, trap_tdb));
+ /* thread struct offsets */
+ OFFSET(__THREAD_ksp, thread_struct, ksp);
+ OFFSET(__THREAD_FPU_fpc, thread_struct, fpu.fpc);
+ OFFSET(__THREAD_FPU_regs, thread_struct, fpu.regs);
+ OFFSET(__THREAD_per_cause, thread_struct, per_event.cause);
+ OFFSET(__THREAD_per_address, thread_struct, per_event.address);
+ OFFSET(__THREAD_per_paid, thread_struct, per_event.paid);
+ OFFSET(__THREAD_trap_tdb, thread_struct, trap_tdb);
BLANK();
- DEFINE(__TI_task, offsetof(struct thread_info, task));
- DEFINE(__TI_flags, offsetof(struct thread_info, flags));
- DEFINE(__TI_sysc_table, offsetof(struct thread_info, sys_call_table));
- DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
- DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
- DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
- DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
- DEFINE(__TI_last_break, offsetof(struct thread_info, last_break));
+ /* thread info offsets */
+ OFFSET(__TI_task, thread_info, task);
+ OFFSET(__TI_flags, thread_info, flags);
+ OFFSET(__TI_sysc_table, thread_info, sys_call_table);
+ OFFSET(__TI_cpu, thread_info, cpu);
+ OFFSET(__TI_precount, thread_info, preempt_count);
+ OFFSET(__TI_user_timer, thread_info, user_timer);
+ OFFSET(__TI_system_timer, thread_info, system_timer);
+ OFFSET(__TI_last_break, thread_info, last_break);
BLANK();
- DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
- DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
- DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
- DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
- DEFINE(__PT_INT_CODE, offsetof(struct pt_regs, int_code));
- DEFINE(__PT_INT_PARM, offsetof(struct pt_regs, int_parm));
- DEFINE(__PT_INT_PARM_LONG, offsetof(struct pt_regs, int_parm_long));
- DEFINE(__PT_FLAGS, offsetof(struct pt_regs, flags));
+ /* pt_regs offsets */
+ OFFSET(__PT_ARGS, pt_regs, args);
+ OFFSET(__PT_PSW, pt_regs, psw);
+ OFFSET(__PT_GPRS, pt_regs, gprs);
+ OFFSET(__PT_ORIG_GPR2, pt_regs, orig_gpr2);
+ OFFSET(__PT_INT_CODE, pt_regs, int_code);
+ OFFSET(__PT_INT_PARM, pt_regs, int_parm);
+ OFFSET(__PT_INT_PARM_LONG, pt_regs, int_parm_long);
+ OFFSET(__PT_FLAGS, pt_regs, flags);
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
- DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
- DEFINE(__SF_GPRS, offsetof(struct stack_frame, gprs));
- DEFINE(__SF_EMPTY, offsetof(struct stack_frame, empty1));
+ /* stack_frame offsets */
+ OFFSET(__SF_BACKCHAIN, stack_frame, back_chain);
+ OFFSET(__SF_GPRS, stack_frame, gprs);
+ OFFSET(__SF_EMPTY, stack_frame, empty1);
BLANK();
/* timeval/timezone offsets for use by vdso */
- DEFINE(__VDSO_UPD_COUNT, offsetof(struct vdso_data, tb_update_count));
- DEFINE(__VDSO_XTIME_STAMP, offsetof(struct vdso_data, xtime_tod_stamp));
- DEFINE(__VDSO_XTIME_SEC, offsetof(struct vdso_data, xtime_clock_sec));
- DEFINE(__VDSO_XTIME_NSEC, offsetof(struct vdso_data, xtime_clock_nsec));
- DEFINE(__VDSO_XTIME_CRS_SEC, offsetof(struct vdso_data, xtime_coarse_sec));
- DEFINE(__VDSO_XTIME_CRS_NSEC, offsetof(struct vdso_data, xtime_coarse_nsec));
- DEFINE(__VDSO_WTOM_SEC, offsetof(struct vdso_data, wtom_clock_sec));
- DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
- DEFINE(__VDSO_WTOM_CRS_SEC, offsetof(struct vdso_data, wtom_coarse_sec));
- DEFINE(__VDSO_WTOM_CRS_NSEC, offsetof(struct vdso_data, wtom_coarse_nsec));
- DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
- DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
- DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult));
- DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift));
- DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
- DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
+ OFFSET(__VDSO_UPD_COUNT, vdso_data, tb_update_count);
+ OFFSET(__VDSO_XTIME_STAMP, vdso_data, xtime_tod_stamp);
+ OFFSET(__VDSO_XTIME_SEC, vdso_data, xtime_clock_sec);
+ OFFSET(__VDSO_XTIME_NSEC, vdso_data, xtime_clock_nsec);
+ OFFSET(__VDSO_XTIME_CRS_SEC, vdso_data, xtime_coarse_sec);
+ OFFSET(__VDSO_XTIME_CRS_NSEC, vdso_data, xtime_coarse_nsec);
+ OFFSET(__VDSO_WTOM_SEC, vdso_data, wtom_clock_sec);
+ OFFSET(__VDSO_WTOM_NSEC, vdso_data, wtom_clock_nsec);
+ OFFSET(__VDSO_WTOM_CRS_SEC, vdso_data, wtom_coarse_sec);
+ OFFSET(__VDSO_WTOM_CRS_NSEC, vdso_data, wtom_coarse_nsec);
+ OFFSET(__VDSO_TIMEZONE, vdso_data, tz_minuteswest);
+ OFFSET(__VDSO_ECTG_OK, vdso_data, ectg_available);
+ OFFSET(__VDSO_TK_MULT, vdso_data, tk_mult);
+ OFFSET(__VDSO_TK_SHIFT, vdso_data, tk_shift);
+ OFFSET(__VDSO_ECTG_BASE, vdso_per_cpu_data, ectg_timer_base);
+ OFFSET(__VDSO_ECTG_USER, vdso_per_cpu_data, ectg_user_time);
+ BLANK();
/* constants used by the vdso */
DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
DEFINE(__CLOCK_COARSE_RES, LOW_RES_NSEC);
BLANK();
/* idle data offsets */
- DEFINE(__CLOCK_IDLE_ENTER, offsetof(struct s390_idle_data, clock_idle_enter));
- DEFINE(__CLOCK_IDLE_EXIT, offsetof(struct s390_idle_data, clock_idle_exit));
- DEFINE(__TIMER_IDLE_ENTER, offsetof(struct s390_idle_data, timer_idle_enter));
- DEFINE(__TIMER_IDLE_EXIT, offsetof(struct s390_idle_data, timer_idle_exit));
- /* lowcore offsets */
- DEFINE(__LC_EXT_PARAMS, offsetof(struct _lowcore, ext_params));
- DEFINE(__LC_EXT_CPU_ADDR, offsetof(struct _lowcore, ext_cpu_addr));
- DEFINE(__LC_EXT_INT_CODE, offsetof(struct _lowcore, ext_int_code));
- DEFINE(__LC_SVC_ILC, offsetof(struct _lowcore, svc_ilc));
- DEFINE(__LC_SVC_INT_CODE, offsetof(struct _lowcore, svc_code));
- DEFINE(__LC_PGM_ILC, offsetof(struct _lowcore, pgm_ilc));
- DEFINE(__LC_PGM_INT_CODE, offsetof(struct _lowcore, pgm_code));
- DEFINE(__LC_TRANS_EXC_CODE, offsetof(struct _lowcore, trans_exc_code));
- DEFINE(__LC_MON_CLASS_NR, offsetof(struct _lowcore, mon_class_num));
- DEFINE(__LC_PER_CODE, offsetof(struct _lowcore, per_code));
- DEFINE(__LC_PER_ATMID, offsetof(struct _lowcore, per_atmid));
- DEFINE(__LC_PER_ADDRESS, offsetof(struct _lowcore, per_address));
- DEFINE(__LC_EXC_ACCESS_ID, offsetof(struct _lowcore, exc_access_id));
- DEFINE(__LC_PER_ACCESS_ID, offsetof(struct _lowcore, per_access_id));
- DEFINE(__LC_OP_ACCESS_ID, offsetof(struct _lowcore, op_access_id));
- DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_mode_id));
- DEFINE(__LC_MON_CODE, offsetof(struct _lowcore, monitor_code));
- DEFINE(__LC_SUBCHANNEL_ID, offsetof(struct _lowcore, subchannel_id));
- DEFINE(__LC_SUBCHANNEL_NR, offsetof(struct _lowcore, subchannel_nr));
- DEFINE(__LC_IO_INT_PARM, offsetof(struct _lowcore, io_int_parm));
- DEFINE(__LC_IO_INT_WORD, offsetof(struct _lowcore, io_int_word));
- DEFINE(__LC_STFL_FAC_LIST, offsetof(struct _lowcore, stfl_fac_list));
- DEFINE(__LC_MCCK_CODE, offsetof(struct _lowcore, mcck_interruption_code));
- DEFINE(__LC_MCCK_EXT_DAM_CODE, offsetof(struct _lowcore, external_damage_code));
- DEFINE(__LC_RST_OLD_PSW, offsetof(struct _lowcore, restart_old_psw));
- DEFINE(__LC_EXT_OLD_PSW, offsetof(struct _lowcore, external_old_psw));
- DEFINE(__LC_SVC_OLD_PSW, offsetof(struct _lowcore, svc_old_psw));
- DEFINE(__LC_PGM_OLD_PSW, offsetof(struct _lowcore, program_old_psw));
- DEFINE(__LC_MCK_OLD_PSW, offsetof(struct _lowcore, mcck_old_psw));
- DEFINE(__LC_IO_OLD_PSW, offsetof(struct _lowcore, io_old_psw));
- DEFINE(__LC_RST_NEW_PSW, offsetof(struct _lowcore, restart_psw));
- DEFINE(__LC_EXT_NEW_PSW, offsetof(struct _lowcore, external_new_psw));
- DEFINE(__LC_SVC_NEW_PSW, offsetof(struct _lowcore, svc_new_psw));
- DEFINE(__LC_PGM_NEW_PSW, offsetof(struct _lowcore, program_new_psw));
- DEFINE(__LC_MCK_NEW_PSW, offsetof(struct _lowcore, mcck_new_psw));
- DEFINE(__LC_IO_NEW_PSW, offsetof(struct _lowcore, io_new_psw));
+ OFFSET(__CLOCK_IDLE_ENTER, s390_idle_data, clock_idle_enter);
+ OFFSET(__CLOCK_IDLE_EXIT, s390_idle_data, clock_idle_exit);
+ OFFSET(__TIMER_IDLE_ENTER, s390_idle_data, timer_idle_enter);
+ OFFSET(__TIMER_IDLE_EXIT, s390_idle_data, timer_idle_exit);
BLANK();
- DEFINE(__LC_SAVE_AREA_SYNC, offsetof(struct _lowcore, save_area_sync));
- DEFINE(__LC_SAVE_AREA_ASYNC, offsetof(struct _lowcore, save_area_async));
- DEFINE(__LC_SAVE_AREA_RESTART, offsetof(struct _lowcore, save_area_restart));
- DEFINE(__LC_CPU_FLAGS, offsetof(struct _lowcore, cpu_flags));
- DEFINE(__LC_RETURN_PSW, offsetof(struct _lowcore, return_psw));
- DEFINE(__LC_RETURN_MCCK_PSW, offsetof(struct _lowcore, return_mcck_psw));
- DEFINE(__LC_SYNC_ENTER_TIMER, offsetof(struct _lowcore, sync_enter_timer));
- DEFINE(__LC_ASYNC_ENTER_TIMER, offsetof(struct _lowcore, async_enter_timer));
- DEFINE(__LC_MCCK_ENTER_TIMER, offsetof(struct _lowcore, mcck_enter_timer));
- DEFINE(__LC_EXIT_TIMER, offsetof(struct _lowcore, exit_timer));
- DEFINE(__LC_USER_TIMER, offsetof(struct _lowcore, user_timer));
- DEFINE(__LC_SYSTEM_TIMER, offsetof(struct _lowcore, system_timer));
- DEFINE(__LC_STEAL_TIMER, offsetof(struct _lowcore, steal_timer));
- DEFINE(__LC_LAST_UPDATE_TIMER, offsetof(struct _lowcore, last_update_timer));
- DEFINE(__LC_LAST_UPDATE_CLOCK, offsetof(struct _lowcore, last_update_clock));
- DEFINE(__LC_CURRENT, offsetof(struct _lowcore, current_task));
- DEFINE(__LC_CURRENT_PID, offsetof(struct _lowcore, current_pid));
- DEFINE(__LC_THREAD_INFO, offsetof(struct _lowcore, thread_info));
- DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
- DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
- DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
- DEFINE(__LC_RESTART_STACK, offsetof(struct _lowcore, restart_stack));
- DEFINE(__LC_RESTART_FN, offsetof(struct _lowcore, restart_fn));
- DEFINE(__LC_RESTART_DATA, offsetof(struct _lowcore, restart_data));
- DEFINE(__LC_RESTART_SOURCE, offsetof(struct _lowcore, restart_source));
- DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce));
- DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
- DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
- DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
- DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
- DEFINE(__LC_DUMP_REIPL, offsetof(struct _lowcore, ipib));
+ /* hardware defined lowcore locations 0x000 - 0x1ff */
+ OFFSET(__LC_EXT_PARAMS, _lowcore, ext_params);
+ OFFSET(__LC_EXT_CPU_ADDR, _lowcore, ext_cpu_addr);
+ OFFSET(__LC_EXT_INT_CODE, _lowcore, ext_int_code);
+ OFFSET(__LC_SVC_ILC, _lowcore, svc_ilc);
+ OFFSET(__LC_SVC_INT_CODE, _lowcore, svc_code);
+ OFFSET(__LC_PGM_ILC, _lowcore, pgm_ilc);
+ OFFSET(__LC_PGM_INT_CODE, _lowcore, pgm_code);
+ OFFSET(__LC_DATA_EXC_CODE, _lowcore, data_exc_code);
+ OFFSET(__LC_MON_CLASS_NR, _lowcore, mon_class_num);
+ OFFSET(__LC_PER_CODE, _lowcore, per_code);
+ OFFSET(__LC_PER_ATMID, _lowcore, per_atmid);
+ OFFSET(__LC_PER_ADDRESS, _lowcore, per_address);
+ OFFSET(__LC_EXC_ACCESS_ID, _lowcore, exc_access_id);
+ OFFSET(__LC_PER_ACCESS_ID, _lowcore, per_access_id);
+ OFFSET(__LC_OP_ACCESS_ID, _lowcore, op_access_id);
+ OFFSET(__LC_AR_MODE_ID, _lowcore, ar_mode_id);
+ OFFSET(__LC_TRANS_EXC_CODE, _lowcore, trans_exc_code);
+ OFFSET(__LC_MON_CODE, _lowcore, monitor_code);
+ OFFSET(__LC_SUBCHANNEL_ID, _lowcore, subchannel_id);
+ OFFSET(__LC_SUBCHANNEL_NR, _lowcore, subchannel_nr);
+ OFFSET(__LC_IO_INT_PARM, _lowcore, io_int_parm);
+ OFFSET(__LC_IO_INT_WORD, _lowcore, io_int_word);
+ OFFSET(__LC_STFL_FAC_LIST, _lowcore, stfl_fac_list);
+ OFFSET(__LC_MCCK_CODE, _lowcore, mcck_interruption_code);
+ OFFSET(__LC_MCCK_FAIL_STOR_ADDR, _lowcore, failing_storage_address);
+ OFFSET(__LC_LAST_BREAK, _lowcore, breaking_event_addr);
+ OFFSET(__LC_RST_OLD_PSW, _lowcore, restart_old_psw);
+ OFFSET(__LC_EXT_OLD_PSW, _lowcore, external_old_psw);
+ OFFSET(__LC_SVC_OLD_PSW, _lowcore, svc_old_psw);
+ OFFSET(__LC_PGM_OLD_PSW, _lowcore, program_old_psw);
+ OFFSET(__LC_MCK_OLD_PSW, _lowcore, mcck_old_psw);
+ OFFSET(__LC_IO_OLD_PSW, _lowcore, io_old_psw);
+ OFFSET(__LC_RST_NEW_PSW, _lowcore, restart_psw);
+ OFFSET(__LC_EXT_NEW_PSW, _lowcore, external_new_psw);
+ OFFSET(__LC_SVC_NEW_PSW, _lowcore, svc_new_psw);
+ OFFSET(__LC_PGM_NEW_PSW, _lowcore, program_new_psw);
+ OFFSET(__LC_MCK_NEW_PSW, _lowcore, mcck_new_psw);
+ OFFSET(__LC_IO_NEW_PSW, _lowcore, io_new_psw);
+ /* software defined lowcore locations 0x200 - 0xdff*/
+ OFFSET(__LC_SAVE_AREA_SYNC, _lowcore, save_area_sync);
+ OFFSET(__LC_SAVE_AREA_ASYNC, _lowcore, save_area_async);
+ OFFSET(__LC_SAVE_AREA_RESTART, _lowcore, save_area_restart);
+ OFFSET(__LC_CPU_FLAGS, _lowcore, cpu_flags);
+ OFFSET(__LC_RETURN_PSW, _lowcore, return_psw);
+ OFFSET(__LC_RETURN_MCCK_PSW, _lowcore, return_mcck_psw);
+ OFFSET(__LC_SYNC_ENTER_TIMER, _lowcore, sync_enter_timer);
+ OFFSET(__LC_ASYNC_ENTER_TIMER, _lowcore, async_enter_timer);
+ OFFSET(__LC_MCCK_ENTER_TIMER, _lowcore, mcck_enter_timer);
+ OFFSET(__LC_EXIT_TIMER, _lowcore, exit_timer);
+ OFFSET(__LC_USER_TIMER, _lowcore, user_timer);
+ OFFSET(__LC_SYSTEM_TIMER, _lowcore, system_timer);
+ OFFSET(__LC_STEAL_TIMER, _lowcore, steal_timer);
+ OFFSET(__LC_LAST_UPDATE_TIMER, _lowcore, last_update_timer);
+ OFFSET(__LC_LAST_UPDATE_CLOCK, _lowcore, last_update_clock);
+ OFFSET(__LC_INT_CLOCK, _lowcore, int_clock);
+ OFFSET(__LC_MCCK_CLOCK, _lowcore, mcck_clock);
+ OFFSET(__LC_CURRENT, _lowcore, current_task);
+ OFFSET(__LC_THREAD_INFO, _lowcore, thread_info);
+ OFFSET(__LC_KERNEL_STACK, _lowcore, kernel_stack);
+ OFFSET(__LC_ASYNC_STACK, _lowcore, async_stack);
+ OFFSET(__LC_PANIC_STACK, _lowcore, panic_stack);
+ OFFSET(__LC_RESTART_STACK, _lowcore, restart_stack);
+ OFFSET(__LC_RESTART_FN, _lowcore, restart_fn);
+ OFFSET(__LC_RESTART_DATA, _lowcore, restart_data);
+ OFFSET(__LC_RESTART_SOURCE, _lowcore, restart_source);
+ OFFSET(__LC_USER_ASCE, _lowcore, user_asce);
+ OFFSET(__LC_LPP, _lowcore, lpp);
+ OFFSET(__LC_CURRENT_PID, _lowcore, current_pid);
+ OFFSET(__LC_PERCPU_OFFSET, _lowcore, percpu_offset);
+ OFFSET(__LC_VDSO_PER_CPU, _lowcore, vdso_per_cpu_data);
+ OFFSET(__LC_MACHINE_FLAGS, _lowcore, machine_flags);
+ OFFSET(__LC_GMAP, _lowcore, gmap);
+ OFFSET(__LC_PASTE, _lowcore, paste);
+ /* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
+ OFFSET(__LC_DUMP_REIPL, _lowcore, ipib);
+ /* hardware defined lowcore locations 0x1000 - 0x18ff */
+ OFFSET(__LC_VX_SAVE_AREA_ADDR, _lowcore, vector_save_area_addr);
+ OFFSET(__LC_EXT_PARAMS2, _lowcore, ext_params2);
+ OFFSET(SAVE_AREA_BASE, _lowcore, floating_pt_save_area);
+ OFFSET(__LC_FPREGS_SAVE_AREA, _lowcore, floating_pt_save_area);
+ OFFSET(__LC_GPREGS_SAVE_AREA, _lowcore, gpregs_save_area);
+ OFFSET(__LC_PSW_SAVE_AREA, _lowcore, psw_save_area);
+ OFFSET(__LC_PREFIX_SAVE_AREA, _lowcore, prefixreg_save_area);
+ OFFSET(__LC_FP_CREG_SAVE_AREA, _lowcore, fpt_creg_save_area);
+ OFFSET(__LC_CPU_TIMER_SAVE_AREA, _lowcore, cpu_timer_save_area);
+ OFFSET(__LC_CLOCK_COMP_SAVE_AREA, _lowcore, clock_comp_save_area);
+ OFFSET(__LC_AREGS_SAVE_AREA, _lowcore, access_regs_save_area);
+ OFFSET(__LC_CREGS_SAVE_AREA, _lowcore, cregs_save_area);
+ OFFSET(__LC_PGM_TDB, _lowcore, pgm_tdb);
BLANK();
- DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area));
- DEFINE(__LC_CLOCK_COMP_SAVE_AREA, offsetof(struct _lowcore, clock_comp_save_area));
- DEFINE(__LC_PSW_SAVE_AREA, offsetof(struct _lowcore, psw_save_area));
- DEFINE(__LC_PREFIX_SAVE_AREA, offsetof(struct _lowcore, prefixreg_save_area));
- DEFINE(__LC_AREGS_SAVE_AREA, offsetof(struct _lowcore, access_regs_save_area));
- DEFINE(__LC_FPREGS_SAVE_AREA, offsetof(struct _lowcore, floating_pt_save_area));
- DEFINE(__LC_GPREGS_SAVE_AREA, offsetof(struct _lowcore, gpregs_save_area));
- DEFINE(__LC_CREGS_SAVE_AREA, offsetof(struct _lowcore, cregs_save_area));
- DEFINE(__LC_DATA_EXC_CODE, offsetof(struct _lowcore, data_exc_code));
- DEFINE(__LC_MCCK_FAIL_STOR_ADDR, offsetof(struct _lowcore, failing_storage_address));
- DEFINE(__LC_VX_SAVE_AREA_ADDR, offsetof(struct _lowcore, vector_save_area_addr));
- DEFINE(__LC_EXT_PARAMS2, offsetof(struct _lowcore, ext_params2));
- DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, floating_pt_save_area));
- DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste));
- DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area));
- DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
- DEFINE(__LC_PERCPU_OFFSET, offsetof(struct _lowcore, percpu_offset));
- DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
- DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
- DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));
- DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
- DEFINE(__SIE_PROG0C, offsetof(struct kvm_s390_sie_block, prog0c));
- DEFINE(__SIE_PROG20, offsetof(struct kvm_s390_sie_block, prog20));
+ /* gmap/sie offsets */
+ OFFSET(__GMAP_ASCE, gmap, asce);
+ OFFSET(__SIE_PROG0C, kvm_s390_sie_block, prog0c);
+ OFFSET(__SIE_PROG20, kvm_s390_sie_block, prog20);
return 0;
}
return -EFAULT;
/* Save vector registers to signal stack */
- if (is_vx_task(current)) {
+ if (MACHINE_HAS_VX) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
*(__u32 *)®s->gprs[i] = gprs_high[i];
/* Restore vector registers from signal stack */
- if (is_vx_task(current)) {
+ if (MACHINE_HAS_VX) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
*/
uc_flags = UC_GPRS_HIGH;
if (MACHINE_HAS_VX) {
- if (is_vx_task(current))
- uc_flags |= UC_VXRS;
+ uc_flags |= UC_VXRS;
} else
frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/string.h>
+#include <asm/diag.h>
#include <asm/ebcdic.h>
#include <asm/cpcmd.h>
#include <asm/io.h>
memcpy(cpcmd_buf, cmd, cmdlen);
ASCEBC(cpcmd_buf, cmdlen);
+ diag_stat_inc(DIAG_STAT_X008);
if (response) {
memset(response, 0, rlen);
response_len = rlen;
.regions = &oldmem_region,
};
-#define for_each_dump_mem_range(i, nid, p_start, p_end, p_nid) \
- for (i = 0, __next_mem_range(&i, nid, MEMBLOCK_NONE, \
- &memblock.physmem, \
- &oldmem_type, p_start, \
- p_end, p_nid); \
- i != (u64)ULLONG_MAX; \
- __next_mem_range(&i, nid, MEMBLOCK_NONE, &memblock.physmem,\
- &oldmem_type, \
- p_start, p_end, p_nid))
-
struct dump_save_areas dump_save_areas;
/*
int cnt = 0;
u64 idx;
- for_each_dump_mem_range(idx, NUMA_NO_NODE, NULL, NULL, NULL)
+ for_each_mem_range(idx, &memblock.physmem, &oldmem_type, NUMA_NO_NODE,
+ MEMBLOCK_NONE, NULL, NULL, NULL)
cnt++;
return cnt;
}
phys_addr_t start, end;
u64 idx;
- for_each_dump_mem_range(idx, NUMA_NO_NODE, &start, &end, NULL) {
+ for_each_mem_range(idx, &memblock.physmem, &oldmem_type, NUMA_NO_NODE,
+ MEMBLOCK_NONE, &start, &end, NULL) {
phdr->p_filesz = end - start;
phdr->p_type = PT_LOAD;
phdr->p_offset = start;
*/
#include <linux/module.h>
+#include <linux/cpu.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
#include <asm/diag.h>
+#include <asm/trace/diag.h>
+
+struct diag_stat {
+ unsigned int counter[NR_DIAG_STAT];
+};
+
+static DEFINE_PER_CPU(struct diag_stat, diag_stat);
+
+struct diag_desc {
+ int code;
+ char *name;
+};
+
+static const struct diag_desc diag_map[NR_DIAG_STAT] = {
+ [DIAG_STAT_X008] = { .code = 0x008, .name = "Console Function" },
+ [DIAG_STAT_X00C] = { .code = 0x00c, .name = "Pseudo Timer" },
+ [DIAG_STAT_X010] = { .code = 0x010, .name = "Release Pages" },
+ [DIAG_STAT_X014] = { .code = 0x014, .name = "Spool File Services" },
+ [DIAG_STAT_X044] = { .code = 0x044, .name = "Voluntary Timeslice End" },
+ [DIAG_STAT_X064] = { .code = 0x064, .name = "NSS Manipulation" },
+ [DIAG_STAT_X09C] = { .code = 0x09c, .name = "Relinquish Timeslice" },
+ [DIAG_STAT_X0DC] = { .code = 0x0dc, .name = "Appldata Control" },
+ [DIAG_STAT_X204] = { .code = 0x204, .name = "Logical-CPU Utilization" },
+ [DIAG_STAT_X210] = { .code = 0x210, .name = "Device Information" },
+ [DIAG_STAT_X224] = { .code = 0x224, .name = "EBCDIC-Name Table" },
+ [DIAG_STAT_X250] = { .code = 0x250, .name = "Block I/O" },
+ [DIAG_STAT_X258] = { .code = 0x258, .name = "Page-Reference Services" },
+ [DIAG_STAT_X288] = { .code = 0x288, .name = "Time Bomb" },
+ [DIAG_STAT_X2C4] = { .code = 0x2c4, .name = "FTP Services" },
+ [DIAG_STAT_X2FC] = { .code = 0x2fc, .name = "Guest Performance Data" },
+ [DIAG_STAT_X304] = { .code = 0x304, .name = "Partition-Resource Service" },
+ [DIAG_STAT_X308] = { .code = 0x308, .name = "List-Directed IPL" },
+ [DIAG_STAT_X500] = { .code = 0x500, .name = "Virtio Service" },
+};
+
+static int show_diag_stat(struct seq_file *m, void *v)
+{
+ struct diag_stat *stat;
+ unsigned long n = (unsigned long) v - 1;
+ int cpu, prec, tmp;
+
+ get_online_cpus();
+ if (n == 0) {
+ seq_puts(m, " ");
+
+ for_each_online_cpu(cpu) {
+ prec = 10;
+ for (tmp = 10; cpu >= tmp; tmp *= 10)
+ prec--;
+ seq_printf(m, "%*s%d", prec, "CPU", cpu);
+ }
+ seq_putc(m, '\n');
+ } else if (n <= NR_DIAG_STAT) {
+ seq_printf(m, "diag %03x:", diag_map[n-1].code);
+ for_each_online_cpu(cpu) {
+ stat = &per_cpu(diag_stat, cpu);
+ seq_printf(m, " %10u", stat->counter[n-1]);
+ }
+ seq_printf(m, " %s\n", diag_map[n-1].name);
+ }
+ put_online_cpus();
+ return 0;
+}
+
+static void *show_diag_stat_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos <= nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
+}
+
+static void *show_diag_stat_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return show_diag_stat_start(m, pos);
+}
+
+static void show_diag_stat_stop(struct seq_file *m, void *v)
+{
+}
+
+static const struct seq_operations show_diag_stat_sops = {
+ .start = show_diag_stat_start,
+ .next = show_diag_stat_next,
+ .stop = show_diag_stat_stop,
+ .show = show_diag_stat,
+};
+
+static int show_diag_stat_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &show_diag_stat_sops);
+}
+
+static const struct file_operations show_diag_stat_fops = {
+ .open = show_diag_stat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+
+static int __init show_diag_stat_init(void)
+{
+ debugfs_create_file("diag_stat", 0400, NULL, NULL,
+ &show_diag_stat_fops);
+ return 0;
+}
+
+device_initcall(show_diag_stat_init);
+
+void diag_stat_inc(enum diag_stat_enum nr)
+{
+ this_cpu_inc(diag_stat.counter[nr]);
+ trace_diagnose(diag_map[nr].code);
+}
+EXPORT_SYMBOL(diag_stat_inc);
+
+void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+{
+ this_cpu_inc(diag_stat.counter[nr]);
+ trace_diagnose_norecursion(diag_map[nr].code);
+}
+EXPORT_SYMBOL(diag_stat_inc_norecursion);
/*
* Diagnose 14: Input spool file manipulation
*/
-int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
+static inline int __diag14(unsigned long rx, unsigned long ry1,
+ unsigned long subcode)
{
register unsigned long _ry1 asm("2") = ry1;
register unsigned long _ry2 asm("3") = subcode;
return rc;
}
+
+int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
+{
+ diag_stat_inc(DIAG_STAT_X014);
+ return __diag14(rx, ry1, subcode);
+}
EXPORT_SYMBOL(diag14);
/*
spin_lock_irqsave(&diag210_lock, flags);
diag210_tmp = *addr;
+ diag_stat_inc(DIAG_STAT_X210);
asm volatile(
" lhi %0,-1\n"
" sam31\n"
#include <linux/pfn.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
+#include <asm/diag.h>
#include <asm/ebcdic.h>
#include <asm/ipl.h>
#include <asm/lowcore.h>
int rc;
cpu_address = stap();
+ diag_stat_inc(DIAG_STAT_X09C);
asm volatile(
" diag %2,0,0x9c\n"
"0: la %0,0\n"
{
int rc;
+ diag_stat_inc(DIAG_STAT_X044);
asm volatile(
" diag 0,0,0x44\n"
"0: la %0,0\n"
S390_lowcore.machine_flags |= MACHINE_FLAG_TE;
if (test_facility(51))
S390_lowcore.machine_flags |= MACHINE_FLAG_TLB_LC;
- if (test_facility(129))
+ if (test_facility(129)) {
S390_lowcore.machine_flags |= MACHINE_FLAG_VX;
+ __ctl_set_bit(0, 17);
+ }
+}
+
+static int __init disable_vector_extension(char *str)
+{
+ S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX;
+ __ctl_clear_bit(0, 17);
+ return 1;
}
+early_param("novx", disable_vector_extension);
static int __init cad_setup(char *str)
{
#include <asm/page.h>
#include <asm/sigp.h>
#include <asm/irq.h>
-#include <asm/fpu-internal.h>
#include <asm/vx-insn.h>
+#include <asm/setup.h>
+#include <asm/nmi.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
#endif
.endm
+ /*
+ * The TSTMSK macro generates a test-under-mask instruction by
+ * calculating the memory offset for the specified mask value.
+ * Mask value can be any constant. The macro shifts the mask
+ * value to calculate the memory offset for the test-under-mask
+ * instruction.
+ */
+ .macro TSTMSK addr, mask, size=8, bytepos=0
+ .if (\bytepos < \size) && (\mask >> 8)
+ .if (\mask & 0xff)
+ .error "Mask exceeds byte boundary"
+ .endif
+ TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
+ .exitm
+ .endif
+ .ifeq \mask
+ .error "Mask must not be zero"
+ .endif
+ off = \size - \bytepos - 1
+ tm off+\addr, \mask
+ .endm
+
.section .kprobes.text, "ax"
/*
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
lg %r15,__THREAD_ksp(%r1) # load kernel stack of next
lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
- mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next
+ mvc __LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPP
+ bzr %r14
+ .insn s,0xb2800000,__LC_LPP # set program parameter
br %r14
.L__critical_start:
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
stg %r2,__SF_EMPTY(%r15) # save control block pointer
stg %r3,__SF_EMPTY+8(%r15) # save guest register save area
- xc __SF_EMPTY+16(16,%r15),__SF_EMPTY+16(%r15) # host id & reason
- tm __LC_CPU_FLAGS+7,_CIF_FPU # load guest fp/vx registers ?
+ xc __SF_EMPTY+16(8,%r15),__SF_EMPTY+16(%r15) # reason code = 0
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU # load guest fp/vx registers ?
jno .Lsie_load_guest_gprs
brasl %r14,load_fpu_regs # load guest fp/vx regs
.Lsie_load_guest_gprs:
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
tm __SIE_PROG20+3(%r14),3 # last exit...
jnz .Lsie_skip
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lsie_skip # exit if fp/vx regs changed
- tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
- jz .Lsie_enter
- .insn s,0xb2800000,__LC_CURRENT_PID # set guest id to pid
-.Lsie_enter:
sie 0(%r14)
- tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
- jz .Lsie_skip
- .insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id
.Lsie_skip:
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
- lg %r2,__SF_EMPTY+24(%r15) # return exit reason code
+ lg %r2,__SF_EMPTY+16(%r15) # return exit reason code
br %r14
.Lsie_fault:
lghi %r14,-EFAULT
- stg %r14,__SF_EMPTY+24(%r15) # set exit reason code
+ stg %r14,__SF_EMPTY+16(%r15) # set exit reason code
j sie_exit
EX_TABLE(.Lrewind_pad,.Lsie_fault)
stg %r2,__PT_ORIG_GPR2(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lgf %r9,0(%r8,%r10) # get system call add.
- tm __TI_flags+7(%r12),_TIF_TRACE
+ TSTMSK __TI_flags(%r12),_TIF_TRACE
jnz .Lsysc_tracesys
basr %r14,%r9 # call sys_xxxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_return:
LOCKDEP_SYS_EXIT
.Lsysc_tif:
- tm __PT_FLAGS+7(%r11),_PIF_WORK
+ TSTMSK __PT_FLAGS(%r11),_PIF_WORK
jnz .Lsysc_work
- tm __TI_flags+7(%r12),_TIF_WORK
+ TSTMSK __TI_flags(%r12),_TIF_WORK
jnz .Lsysc_work # check for work
- tm __LC_CPU_FLAGS+7,_CIF_WORK
+ TSTMSK __LC_CPU_FLAGS,_CIF_WORK
jnz .Lsysc_work
.Lsysc_restore:
lg %r14,__LC_VDSO_PER_CPU
# One of the work bits is on. Find out which one.
#
.Lsysc_work:
- tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
+ TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING
jo .Lsysc_mcck_pending
- tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
+ TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jo .Lsysc_reschedule
#ifdef CONFIG_UPROBES
- tm __TI_flags+7(%r12),_TIF_UPROBE
+ TSTMSK __TI_flags(%r12),_TIF_UPROBE
jo .Lsysc_uprobe_notify
#endif
- tm __PT_FLAGS+7(%r11),_PIF_PER_TRAP
+ TSTMSK __PT_FLAGS(%r11),_PIF_PER_TRAP
jo .Lsysc_singlestep
- tm __TI_flags+7(%r12),_TIF_SIGPENDING
+ TSTMSK __TI_flags(%r12),_TIF_SIGPENDING
jo .Lsysc_sigpending
- tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME
+ TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME
jo .Lsysc_notify_resume
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lsysc_vxrs
- tm __LC_CPU_FLAGS+7,_CIF_ASCE
+ TSTMSK __LC_CPU_FLAGS,_CIF_ASCE
jo .Lsysc_uaccess
j .Lsysc_return # beware of critical section cleanup
.Lsysc_sigpending:
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_signal
- tm __PT_FLAGS+7(%r11),_PIF_SYSCALL
+ TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL
jno .Lsysc_return
lmg %r2,%r7,__PT_R2(%r11) # load svc arguments
lg %r10,__TI_sysc_table(%r12) # address of system call table
basr %r14,%r9 # call sys_xxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_tracenogo:
- tm __TI_flags+7(%r12),_TIF_TRACE
+ TSTMSK __TI_flags(%r12),_TIF_TRACE
jz .Lsysc_return
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
+ TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
+ jo .Lio_restore
TRACE_IRQS_OFF
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
.Lio_loop:
lghi %r3,THIN_INTERRUPT
.Lio_call:
brasl %r14,do_IRQ
- tm __LC_MACHINE_FLAGS+6,0x10 # MACHINE_FLAG_LPAR
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPAR
jz .Lio_return
tpi 0
jz .Lio_return
LOCKDEP_SYS_EXIT
TRACE_IRQS_ON
.Lio_tif:
- tm __TI_flags+7(%r12),_TIF_WORK
+ TSTMSK __TI_flags(%r12),_TIF_WORK
jnz .Lio_work # there is work to do (signals etc.)
- tm __LC_CPU_FLAGS+7,_CIF_WORK
+ TSTMSK __LC_CPU_FLAGS,_CIF_WORK
jnz .Lio_work
.Lio_restore:
lg %r14,__LC_VDSO_PER_CPU
# check for preemptive scheduling
icm %r0,15,__TI_precount(%r12)
jnz .Lio_restore # preemption is disabled
- tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
+ TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jno .Lio_restore
# switch to kernel stack
lg %r1,__PT_R15(%r11)
# One of the work bits is on. Find out which one.
#
.Lio_work_tif:
- tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
+ TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING
jo .Lio_mcck_pending
- tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
+ TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jo .Lio_reschedule
- tm __TI_flags+7(%r12),_TIF_SIGPENDING
+ TSTMSK __TI_flags(%r12),_TIF_SIGPENDING
jo .Lio_sigpending
- tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME
+ TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME
jo .Lio_notify_resume
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lio_vxrs
- tm __LC_CPU_FLAGS+7,_CIF_ASCE
+ TSTMSK __LC_CPU_FLAGS,_CIF_ASCE
jo .Lio_uaccess
j .Lio_return # beware of critical section cleanup
mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS
mvc __PT_INT_PARM_LONG(8,%r11),0(%r1)
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
+ TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
+ jo .Lio_restore
TRACE_IRQS_OFF
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
br %r14
.Lpsw_idle_end:
-/* Store floating-point controls and floating-point or vector extension
- * registers instead. A critical section cleanup assures that the registers
- * are stored even if interrupted for some other work. The register %r2
- * designates a struct fpu to store register contents. If the specified
- * structure does not contain a register save area, the register store is
- * omitted (see also comments in arch_dup_task_struct()).
- *
- * The CIF_FPU flag is set in any case. The CIF_FPU triggers a lazy restore
- * of the register contents at system call or io return.
+/*
+ * Store floating-point controls and floating-point or vector register
+ * depending whether the vector facility is available. A critical section
+ * cleanup assures that the registers are stored even if interrupted for
+ * some other work. The CIF_FPU flag is set to trigger a lazy restore
+ * of the register contents at return from io or a system call.
*/
ENTRY(save_fpu_regs)
lg %r2,__LC_CURRENT
aghi %r2,__TASK_thread
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
bor %r14
stfpc __THREAD_FPU_fpc(%r2)
.Lsave_fpu_regs_fpc_end:
lg %r3,__THREAD_FPU_regs(%r2)
- ltgr %r3,%r3
- jz .Lsave_fpu_regs_done # no save area -> set CIF_FPU
- tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
jz .Lsave_fpu_regs_fp # no -> store FP regs
.Lsave_fpu_regs_vx_low:
VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3)
br %r14
.Lsave_fpu_regs_end:
-/* Load floating-point controls and floating-point or vector extension
- * registers. A critical section cleanup assures that the register contents
- * are loaded even if interrupted for some other work. Depending on the saved
- * FP/VX state, the vector-enablement control, CR0.46, is either set or cleared.
+/*
+ * Load floating-point controls and floating-point or vector registers.
+ * A critical section cleanup assures that the register contents are
+ * loaded even if interrupted for some other work.
*
* There are special calling conventions to fit into sysc and io return work:
* %r15: <kernel stack>
* The function requires:
- * %r4 and __SF_EMPTY+32(%r15)
+ * %r4
*/
load_fpu_regs:
lg %r4,__LC_CURRENT
aghi %r4,__TASK_thread
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
bnor %r14
lfpc __THREAD_FPU_fpc(%r4)
- stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
- tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ?
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area
- jz .Lload_fpu_regs_fp_ctl # -> no VX, load FP regs
-.Lload_fpu_regs_vx_ctl:
- tm __SF_EMPTY+32+5(%r15),2 # test VX control
- jo .Lload_fpu_regs_vx
- oi __SF_EMPTY+32+5(%r15),2 # set VX control
- lctlg %c0,%c0,__SF_EMPTY+32(%r15)
+ jz .Lload_fpu_regs_fp # -> no VX, load FP regs
.Lload_fpu_regs_vx:
VLM %v0,%v15,0,%r4
.Lload_fpu_regs_vx_high:
VLM %v16,%v31,256,%r4
j .Lload_fpu_regs_done
-.Lload_fpu_regs_fp_ctl:
- tm __SF_EMPTY+32+5(%r15),2 # test VX control
- jz .Lload_fpu_regs_fp
- ni __SF_EMPTY+32+5(%r15),253 # clear VX control
- lctlg %c0,%c0,__SF_EMPTY+32(%r15)
.Lload_fpu_regs_fp:
ld 0,0(%r4)
ld 1,8(%r4)
br %r14
.Lload_fpu_regs_end:
-/* Test and set the vector enablement control in CR0.46 */
-ENTRY(__ctl_set_vx)
- stctg %c0,%c0,__SF_EMPTY(%r15)
- tm __SF_EMPTY+5(%r15),2
- bor %r14
- oi __SF_EMPTY+5(%r15),2
- lctlg %c0,%c0,__SF_EMPTY(%r15)
- br %r14
-.L__ctl_set_vx_end:
-
.L__critical_end:
/*
lg %r12,__LC_THREAD_INFO
larl %r13,cleanup_critical
lmg %r8,%r9,__LC_MCK_OLD_PSW
- tm __LC_MCCK_CODE,0x80 # system damage?
+ TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
jo .Lmcck_panic # yes -> rest of mcck code invalid
lghi %r14,__LC_CPU_TIMER_SAVE_AREA
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
- tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid?
+ TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
jo 3f
la %r14,__LC_SYNC_ENTER_TIMER
clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER
la %r14,__LC_LAST_UPDATE_TIMER
2: spt 0(%r14)
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
-3: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid?
+3: TSTMSK __LC_MCCK_CODE,(MCCK_CODE_PSW_MWP_VALID|MCCK_CODE_PSW_IA_VALID)
jno .Lmcck_panic # no -> skip cleanup critical
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_MCCK_ENTER_TIMER
.Lmcck_skip:
la %r11,STACK_FRAME_OVERHEAD(%r1)
lgr %r15,%r1
ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off
- tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
+ TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING
jno .Lmcck_return
TRACE_IRQS_OFF
brasl %r14,s390_handle_mcck
# PSW restart interrupt handler
#
ENTRY(restart_int_handler)
- stg %r15,__LC_SAVE_AREA_RESTART
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPP
+ jz 0f
+ .insn s,0xb2800000,__LC_LPP
+0: stg %r15,__LC_SAVE_AREA_RESTART
lg %r15,__LC_RESTART_STACK
aghi %r15,-__PT_SIZE # create pt_regs on stack
xc 0(__PT_SIZE,%r15),0(%r15)
jl 0f
clg %r9,BASED(.Lcleanup_table+104) # .Lload_fpu_regs_end
jl .Lcleanup_load_fpu_regs
- clg %r9,BASED(.Lcleanup_table+112) # __ctl_set_vx
- jl 0f
- clg %r9,BASED(.Lcleanup_table+120) # .L__ctl_set_vx_end
- jl .Lcleanup___ctl_set_vx
0: br %r14
.align 8
.quad .Lsave_fpu_regs_end
.quad load_fpu_regs
.quad .Lload_fpu_regs_end
- .quad __ctl_set_vx
- .quad .L__ctl_set_vx_end
#if IS_ENABLED(CONFIG_KVM)
.Lcleanup_table_sie:
.Lcleanup_sie:
lg %r9,__SF_EMPTY(%r15) # get control block pointer
- tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
- jz 0f
- .insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id
-0: ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
+ ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
br %r14
.quad .Lpsw_idle_lpsw
.Lcleanup_save_fpu_regs:
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
bor %r14
clg %r9,BASED(.Lcleanup_save_fpu_regs_done)
jhe 5f
stfpc __THREAD_FPU_fpc(%r2)
1: # Load register save area and check if VX is active
lg %r3,__THREAD_FPU_regs(%r2)
- ltgr %r3,%r3
- jz 5f # no save area -> set CIF_FPU
- tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
jz 4f # no VX -> store FP regs
2: # Store vector registers (V0-V15)
VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3)
.quad .Lsave_fpu_regs_done
.Lcleanup_load_fpu_regs:
- tm __LC_CPU_FLAGS+7,_CIF_FPU
+ TSTMSK __LC_CPU_FLAGS,_CIF_FPU
bnor %r14
clg %r9,BASED(.Lcleanup_load_fpu_regs_done)
jhe 1f
clg %r9,BASED(.Lcleanup_load_fpu_regs_fp)
jhe 2f
- clg %r9,BASED(.Lcleanup_load_fpu_regs_fp_ctl)
- jhe 3f
clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_high)
- jhe 4f
+ jhe 3f
clg %r9,BASED(.Lcleanup_load_fpu_regs_vx)
- jhe 5f
- clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_ctl)
- jhe 6f
+ jhe 4f
lg %r4,__LC_CURRENT
aghi %r4,__TASK_thread
lfpc __THREAD_FPU_fpc(%r4)
- tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ?
+ TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area
- jz 3f # -> no VX, load FP regs
-6: # Set VX-enablement control
- stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
- tm __SF_EMPTY+32+5(%r15),2 # test VX control
- jo 5f
- oi __SF_EMPTY+32+5(%r15),2 # set VX control
- lctlg %c0,%c0,__SF_EMPTY+32(%r15)
-5: # Load V0 ..V15 registers
+ jz 2f # -> no VX, load FP regs
+4: # Load V0 ..V15 registers
VLM %v0,%v15,0,%r4
-4: # Load V16..V31 registers
+3: # Load V16..V31 registers
VLM %v16,%v31,256,%r4
j 1f
-3: # Clear VX-enablement control for FP
- stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
- tm __SF_EMPTY+32+5(%r15),2 # test VX control
- jz 2f
- ni __SF_EMPTY+32+5(%r15),253 # clear VX control
- lctlg %c0,%c0,__SF_EMPTY+32(%r15)
2: # Load floating-point registers
ld 0,0(%r4)
ld 1,8(%r4)
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
lg %r9,48(%r11) # return from load_fpu_regs
br %r14
-.Lcleanup_load_fpu_regs_vx_ctl:
- .quad .Lload_fpu_regs_vx_ctl
.Lcleanup_load_fpu_regs_vx:
.quad .Lload_fpu_regs_vx
.Lcleanup_load_fpu_regs_vx_high:
.quad .Lload_fpu_regs_vx_high
-.Lcleanup_load_fpu_regs_fp_ctl:
- .quad .Lload_fpu_regs_fp_ctl
.Lcleanup_load_fpu_regs_fp:
.quad .Lload_fpu_regs_fp
.Lcleanup_load_fpu_regs_done:
.quad .Lload_fpu_regs_done
-.Lcleanup___ctl_set_vx:
- stctg %c0,%c0,__SF_EMPTY(%r15)
- tm __SF_EMPTY+5(%r15),2
- bor %r14
- oi __SF_EMPTY+5(%r15),2
- lctlg %c0,%c0,__SF_EMPTY(%r15)
- lg %r9,48(%r11) # return from __ctl_set_vx
- br %r14
-
/*
* Integer constants
*/
void mcck_int_handler(void);
void restart_int_handler(void);
void restart_call_handler(void);
-void psw_idle(struct s390_idle_data *, unsigned long);
asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
asmlinkage void do_syscall_trace_exit(struct pt_regs *regs);
-int alloc_vector_registers(struct task_struct *tsk);
-
void do_protection_exception(struct pt_regs *regs);
void do_dat_exception(struct pt_regs *regs);
__HEAD
ENTRY(startup_continue)
- larl %r1,sched_clock_base_cc
+ tm __LC_STFL_FAC_LIST+6,0x80 # LPP available ?
+ jz 0f
+ xc __LC_LPP+1(7,0),__LC_LPP+1 # clear lpp and current_pid
+ mvi __LC_LPP,0x80 # and set LPP_MAGIC
+ .insn s,0xb2800000,__LC_LPP # load program parameter
+0: larl %r1,sched_clock_base_cc
mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK
larl %r13,.LPG1 # get base
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
#include <linux/gfp.h>
#include <linux/crash_dump.h>
#include <linux/debug_locks.h>
+#include <asm/diag.h>
#include <asm/ipl.h>
#include <asm/smp.h>
#include <asm/setup.h>
static struct sclp_ipl_info sclp_ipl_info;
-int diag308(unsigned long subcode, void *addr)
+static inline int __diag308(unsigned long subcode, void *addr)
{
register unsigned long _addr asm("0") = (unsigned long) addr;
register unsigned long _rc asm("1") = 0;
: "d" (subcode) : "cc", "memory");
return _rc;
}
+
+int diag308(unsigned long subcode, void *addr)
+{
+ diag_stat_inc(DIAG_STAT_X308);
+ return __diag308(subcode, addr);
+}
EXPORT_SYMBOL_GPL(diag308);
/* SYSFS */
#include <asm/nmi.h>
#include <asm/crw.h>
#include <asm/switch_to.h>
-#include <asm/fpu-internal.h>
#include <asm/ctl_reg.h>
struct mcck_struct {
- int kill_task;
- int channel_report;
- int warning;
- unsigned long long mcck_code;
+ unsigned int kill_task : 1;
+ unsigned int channel_report : 1;
+ unsigned int warning : 1;
+ unsigned int etr_queue : 1;
+ unsigned int stp_queue : 1;
+ unsigned long mcck_code;
};
static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
-static void s390_handle_damage(char *msg)
+static void s390_handle_damage(void)
{
smp_send_stop();
disabled_wait((unsigned long) __builtin_return_address(0));
if (xchg(&mchchk_wng_posted, 1) == 0)
kill_cad_pid(SIGPWR, 1);
}
+ if (mcck.etr_queue)
+ etr_queue_work();
+ if (mcck.stp_queue)
+ stp_queue_work();
if (mcck.kill_task) {
local_irq_enable();
printk(KERN_EMERG "mcck: Terminating task because of machine "
- "malfunction (code 0x%016llx).\n", mcck.mcck_code);
+ "malfunction (code 0x%016lx).\n", mcck.mcck_code);
printk(KERN_EMERG "mcck: task: %s, pid: %d.\n",
current->comm, current->pid);
do_exit(SIGSEGV);
* returns 0 if all registers could be validated
* returns 1 otherwise
*/
-static int notrace s390_revalidate_registers(struct mci *mci)
+static int notrace s390_validate_registers(union mci mci)
{
int kill_task;
u64 zero;
kill_task = 0;
zero = 0;
- if (!mci->gr) {
+ if (!mci.gr) {
/*
* General purpose registers couldn't be restored and have
* unknown contents. Process needs to be terminated.
*/
kill_task = 1;
}
- if (!mci->fp) {
+ if (!mci.fp) {
/*
* Floating point registers can't be restored and
* therefore the process needs to be terminated.
}
fpt_save_area = &S390_lowcore.floating_pt_save_area;
fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area;
- if (!mci->fc) {
+ if (!mci.fc) {
/*
* Floating point control register can't be restored.
* Task will be terminated.
asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
if (!MACHINE_HAS_VX) {
- /* Revalidate floating point registers */
+ /* Validate floating point registers */
asm volatile(
" ld 0,0(%0)\n"
" ld 1,8(%0)\n"
" ld 15,120(%0)\n"
: : "a" (fpt_save_area));
} else {
- /* Revalidate vector registers */
+ /* Validate vector registers */
union ctlreg0 cr0;
- if (!mci->vr) {
+ if (!mci.vr) {
/*
* Vector registers can't be restored and therefore
* the process needs to be terminated.
&S390_lowcore.vector_save_area) : "1");
__ctl_load(S390_lowcore.cregs_save_area[0], 0, 0);
}
- /* Revalidate access registers */
+ /* Validate access registers */
asm volatile(
" lam 0,15,0(%0)"
: : "a" (&S390_lowcore.access_regs_save_area));
- if (!mci->ar) {
+ if (!mci.ar) {
/*
* Access registers have unknown contents.
* Terminating task.
*/
kill_task = 1;
}
- /* Revalidate control registers */
- if (!mci->cr) {
+ /* Validate control registers */
+ if (!mci.cr) {
/*
* Control registers have unknown contents.
* Can't recover and therefore stopping machine.
*/
- s390_handle_damage("invalid control registers.");
+ s390_handle_damage();
} else {
asm volatile(
" lctlg 0,15,0(%0)"
: : "a" (&S390_lowcore.cregs_save_area));
}
/*
- * We don't even try to revalidate the TOD register, since we simply
+ * We don't even try to validate the TOD register, since we simply
* can't write something sensible into that register.
*/
/*
- * See if we can revalidate the TOD programmable register with its
+ * See if we can validate the TOD programmable register with its
* old contents (should be zero) otherwise set it to zero.
*/
- if (!mci->pr)
+ if (!mci.pr)
asm volatile(
" sr 0,0\n"
" sckpf"
" sckpf"
: : "a" (&S390_lowcore.tod_progreg_save_area)
: "0", "cc");
- /* Revalidate clock comparator register */
+ /* Validate clock comparator register */
set_clock_comparator(S390_lowcore.clock_comparator);
/* Check if old PSW is valid */
- if (!mci->wp)
+ if (!mci.wp)
/*
* Can't tell if we come from user or kernel mode
* -> stopping machine.
*/
- s390_handle_damage("old psw invalid.");
+ s390_handle_damage();
- if (!mci->ms || !mci->pm || !mci->ia)
+ if (!mci.ms || !mci.pm || !mci.ia)
kill_task = 1;
return kill_task;
static unsigned long long last_ipd;
struct mcck_struct *mcck;
unsigned long long tmp;
- struct mci *mci;
+ union mci mci;
int umode;
nmi_enter();
inc_irq_stat(NMI_NMI);
- mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
+ mci.val = S390_lowcore.mcck_interruption_code;
mcck = this_cpu_ptr(&cpu_mcck);
umode = user_mode(regs);
- if (mci->sd) {
+ if (mci.sd) {
/* System damage -> stopping machine */
- s390_handle_damage("received system damage machine check.");
+ s390_handle_damage();
}
- if (mci->pd) {
- if (mci->b) {
+ if (mci.pd) {
+ if (mci.b) {
/* Processing backup -> verify if we can survive this */
u64 z_mcic, o_mcic, t_mcic;
z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29);
1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 |
1ULL<<16);
- t_mcic = *(u64 *)mci;
+ t_mcic = mci.val;
if (((t_mcic & z_mcic) != 0) ||
((t_mcic & o_mcic) != o_mcic)) {
- s390_handle_damage("processing backup machine "
- "check with damage.");
+ s390_handle_damage();
}
/*
ipd_count = 1;
last_ipd = tmp;
if (ipd_count == MAX_IPD_COUNT)
- s390_handle_damage("too many ipd retries.");
+ s390_handle_damage();
spin_unlock(&ipd_lock);
} else {
/* Processing damage -> stopping machine */
- s390_handle_damage("received instruction processing "
- "damage machine check.");
+ s390_handle_damage();
}
}
- if (s390_revalidate_registers(mci)) {
+ if (s390_validate_registers(mci)) {
if (umode) {
/*
* Couldn't restore all register contents while in
* user mode -> mark task for termination.
*/
mcck->kill_task = 1;
- mcck->mcck_code = *(unsigned long long *) mci;
+ mcck->mcck_code = mci.val;
set_cpu_flag(CIF_MCCK_PENDING);
} else {
/*
* Couldn't restore all register contents while in
* kernel mode -> stopping machine.
*/
- s390_handle_damage("unable to revalidate registers.");
+ s390_handle_damage();
}
}
- if (mci->cd) {
+ if (mci.cd) {
/* Timing facility damage */
- s390_handle_damage("TOD clock damaged");
+ s390_handle_damage();
}
- if (mci->ed && mci->ec) {
+ if (mci.ed && mci.ec) {
/* External damage */
if (S390_lowcore.external_damage_code & (1U << ED_ETR_SYNC))
- etr_sync_check();
+ mcck->etr_queue |= etr_sync_check();
if (S390_lowcore.external_damage_code & (1U << ED_ETR_SWITCH))
- etr_switch_to_local();
+ mcck->etr_queue |= etr_switch_to_local();
if (S390_lowcore.external_damage_code & (1U << ED_STP_SYNC))
- stp_sync_check();
+ mcck->stp_queue |= stp_sync_check();
if (S390_lowcore.external_damage_code & (1U << ED_STP_ISLAND))
- stp_island_check();
+ mcck->stp_queue |= stp_island_check();
+ if (mcck->etr_queue || mcck->stp_queue)
+ set_cpu_flag(CIF_MCCK_PENDING);
}
- if (mci->se)
+ if (mci.se)
/* Storage error uncorrected */
- s390_handle_damage("received storage error uncorrected "
- "machine check.");
- if (mci->ke)
+ s390_handle_damage();
+ if (mci.ke)
/* Storage key-error uncorrected */
- s390_handle_damage("received storage key-error uncorrected "
- "machine check.");
- if (mci->ds && mci->fa)
+ s390_handle_damage();
+ if (mci.ds && mci.fa)
/* Storage degradation */
- s390_handle_damage("received storage degradation machine "
- "check.");
- if (mci->cp) {
+ s390_handle_damage();
+ if (mci.cp) {
/* Channel report word pending */
mcck->channel_report = 1;
set_cpu_flag(CIF_MCCK_PENDING);
}
- if (mci->w) {
+ if (mci.w) {
/* Warning pending */
mcck->warning = 1;
set_cpu_flag(CIF_MCCK_PENDING);
break;
}
- /* The host-program-parameter (hpp) contains the pid of
- * the CPU thread as set by sie64a() in entry.S.
- * If non-zero assume a guest sample.
+ /*
+ * A non-zero guest program parameter indicates a guest
+ * sample.
+ * Note that some early samples might be misaccounted to
+ * the host.
*/
- if (sfr->basic.hpp)
+ if (sfr->basic.gpp)
sde_regs->in_guest = 1;
overflow = 0;
#include <linux/kprobes.h>
#include <linux/random.h>
#include <linux/module.h>
+#include <linux/init_task.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/vtimer.h>
asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
+/* FPU save area for the init task */
+__vector128 init_task_fpu_regs[__NUM_VXRS] __init_task_data;
+
/*
* Return saved PC of a blocked thread. used in kernel/sched.
* resume in entry.S does not create a new stack frame, it
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
+ size_t fpu_regs_size;
+
*dst = *src;
- /* Set up a new floating-point register save area */
- dst->thread.fpu.fpc = 0;
- dst->thread.fpu.flags = 0; /* Always start with VX disabled */
- dst->thread.fpu.fprs = kzalloc(sizeof(freg_t) * __NUM_FPRS,
- GFP_KERNEL|__GFP_REPEAT);
- if (!dst->thread.fpu.fprs)
+ /*
+ * If the vector extension is available, it is enabled for all tasks,
+ * and, thus, the FPU register save area must be allocated accordingly.
+ */
+ fpu_regs_size = MACHINE_HAS_VX ? sizeof(__vector128) * __NUM_VXRS
+ : sizeof(freg_t) * __NUM_FPRS;
+ dst->thread.fpu.regs = kzalloc(fpu_regs_size, GFP_KERNEL|__GFP_REPEAT);
+ if (!dst->thread.fpu.regs)
return -ENOMEM;
/*
* Save the floating-point or vector register state of the current
- * task. The state is not saved for early kernel threads, for example,
- * the init_task, which do not have an allocated save area.
- * The CIF_FPU flag is set in any case to lazy clear or restore a saved
- * state when switching to a different task or returning to user space.
+ * task and set the CIF_FPU flag to lazy restore the FPU register
+ * state when returning to user space.
*/
save_fpu_regs();
dst->thread.fpu.fpc = current->thread.fpu.fpc;
- if (is_vx_task(current))
- convert_vx_to_fp(dst->thread.fpu.fprs,
- current->thread.fpu.vxrs);
- else
- memcpy(dst->thread.fpu.fprs, current->thread.fpu.fprs,
- sizeof(freg_t) * __NUM_FPRS);
+ memcpy(dst->thread.fpu.regs, current->thread.fpu.regs, fpu_regs_size);
+
return 0;
}
save_fpu_regs();
fpregs->fpc = current->thread.fpu.fpc;
fpregs->pad = 0;
- if (is_vx_task(current))
+ if (MACHINE_HAS_VX)
convert_vx_to_fp((freg_t *)&fpregs->fprs,
current->thread.fpu.vxrs);
else
#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/cpu.h>
+#include <asm/diag.h>
#include <asm/elf.h>
#include <asm/lowcore.h>
#include <asm/param.h>
void notrace cpu_relax(void)
{
- if (!smp_cpu_mtid && MACHINE_HAS_DIAG44)
+ if (!smp_cpu_mtid && MACHINE_HAS_DIAG44) {
+ diag_stat_inc(DIAG_STAT_X044);
asm volatile("diag 0,0,0x44");
+ }
barrier();
}
EXPORT_SYMBOL(cpu_relax);
* or the child->thread.fpu.vxrs array
*/
offset = addr - (addr_t) &dummy->regs.fp_regs.fprs;
- if (is_vx_task(child))
+ if (MACHINE_HAS_VX)
tmp = *(addr_t *)
((addr_t) child->thread.fpu.vxrs + 2*offset);
else
* or the child->thread.fpu.vxrs array
*/
offset = addr - (addr_t) &dummy->regs.fp_regs.fprs;
- if (is_vx_task(child))
+ if (MACHINE_HAS_VX)
*(addr_t *)((addr_t)
child->thread.fpu.vxrs + 2*offset) = data;
else
* or the child->thread.fpu.vxrs array
*/
offset = addr - (addr_t) &dummy32->regs.fp_regs.fprs;
- if (is_vx_task(child))
+ if (MACHINE_HAS_VX)
tmp = *(__u32 *)
((addr_t) child->thread.fpu.vxrs + 2*offset);
else
* or the child->thread.fpu.vxrs array
*/
offset = addr - (addr_t) &dummy32->regs.fp_regs.fprs;
- if (is_vx_task(child))
+ if (MACHINE_HAS_VX)
*(__u32 *)((addr_t)
child->thread.fpu.vxrs + 2*offset) = tmp;
else
if (rc)
return rc;
- if (is_vx_task(target))
+ if (MACHINE_HAS_VX)
convert_fp_to_vx(target->thread.fpu.vxrs, fprs);
else
memcpy(target->thread.fpu.fprs, &fprs, sizeof(fprs));
if (!MACHINE_HAS_VX)
return -ENODEV;
- if (is_vx_task(target)) {
- if (target == current)
- save_fpu_regs();
- for (i = 0; i < __NUM_VXRS_LOW; i++)
- vxrs[i] = *((__u64 *)(target->thread.fpu.vxrs + i) + 1);
- } else
- memset(vxrs, 0, sizeof(vxrs));
+ if (target == current)
+ save_fpu_regs();
+ for (i = 0; i < __NUM_VXRS_LOW; i++)
+ vxrs[i] = *((__u64 *)(target->thread.fpu.vxrs + i) + 1);
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, vxrs, 0, -1);
}
if (!MACHINE_HAS_VX)
return -ENODEV;
- if (!is_vx_task(target)) {
- rc = alloc_vector_registers(target);
- if (rc)
- return rc;
- } else if (target == current)
+ if (target == current)
save_fpu_regs();
rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, vxrs, 0, -1);
if (!MACHINE_HAS_VX)
return -ENODEV;
- if (is_vx_task(target)) {
- if (target == current)
- save_fpu_regs();
- memcpy(vxrs, target->thread.fpu.vxrs + __NUM_VXRS_LOW,
- sizeof(vxrs));
- } else
- memset(vxrs, 0, sizeof(vxrs));
+ if (target == current)
+ save_fpu_regs();
+ memcpy(vxrs, target->thread.fpu.vxrs + __NUM_VXRS_LOW, sizeof(vxrs));
+
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, vxrs, 0, -1);
}
if (!MACHINE_HAS_VX)
return -ENODEV;
- if (!is_vx_task(target)) {
- rc = alloc_vector_registers(target);
- if (rc)
- return rc;
- } else if (target == current)
+ if (target == current)
save_fpu_regs();
rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
#include <linux/module.h>
#include <linux/kvm_host.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/api.h>
#include <asm/ftrace.h>
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(sie64a);
EXPORT_SYMBOL(sie_exit);
EXPORT_SYMBOL(save_fpu_regs);
-EXPORT_SYMBOL(__ctl_set_vx);
#endif
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
int i;
/* Save vector registers to signal stack */
- if (is_vx_task(current)) {
+ if (MACHINE_HAS_VX) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
int i;
/* Restore vector registers from signal stack */
- if (is_vx_task(current)) {
+ if (MACHINE_HAS_VX) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
uc_flags = 0;
if (MACHINE_HAS_VX) {
frame_size += sizeof(_sigregs_ext);
- if (is_vx_task(current))
- uc_flags |= UC_VXRS;
+ uc_flags |= UC_VXRS;
}
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
#include <linux/crash_dump.h>
#include <linux/memblock.h>
#include <asm/asm-offsets.h>
+#include <asm/diag.h>
#include <asm/switch_to.h>
#include <asm/facility.h>
#include <asm/ipl.h>
+ THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
lc->thread_info = (unsigned long) task_thread_info(tsk);
lc->current_task = (unsigned long) tsk;
+ lc->lpp = LPP_MAGIC;
+ lc->current_pid = tsk->pid;
lc->user_timer = ti->user_timer;
lc->system_timer = ti->system_timer;
lc->steal_timer = 0;
void smp_yield_cpu(int cpu)
{
- if (MACHINE_HAS_DIAG9C)
+ if (MACHINE_HAS_DIAG9C) {
+ diag_stat_inc_norecursion(DIAG_STAT_X09C);
asm volatile("diag %0,0,0x9c"
: : "d" (pcpu_devices[cpu].address));
- else if (MACHINE_HAS_DIAG44)
+ } else if (MACHINE_HAS_DIAG44) {
+ diag_stat_inc_norecursion(DIAG_STAT_X044);
asm volatile("diag 0,0,0x44");
+ }
}
/*
* Switch to local machine check. This is called when the last usable
* ETR port goes inactive. After switch to local the clock is not in sync.
*/
-void etr_switch_to_local(void)
+int etr_switch_to_local(void)
{
if (!etr_eacr.sl)
- return;
+ return 0;
disable_sync_clock(NULL);
if (!test_and_set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events)) {
etr_eacr.es = etr_eacr.sl = 0;
etr_setr(&etr_eacr);
- queue_work(time_sync_wq, &etr_work);
+ return 1;
}
+ return 0;
}
/*
* After a ETR sync check the clock is not in sync. The machine check
* is broadcasted to all cpus at the same time.
*/
-void etr_sync_check(void)
+int etr_sync_check(void)
{
if (!etr_eacr.es)
- return;
+ return 0;
disable_sync_clock(NULL);
if (!test_and_set_bit(ETR_EVENT_SYNC_CHECK, &etr_events)) {
etr_eacr.es = 0;
etr_setr(&etr_eacr);
- queue_work(time_sync_wq, &etr_work);
+ return 1;
}
+ return 0;
+}
+
+void etr_queue_work(void)
+{
+ queue_work(time_sync_wq, &etr_work);
}
/*
* After a STP sync check the clock is not in sync. The machine check
* is broadcasted to all cpus at the same time.
*/
-void stp_sync_check(void)
+int stp_sync_check(void)
{
disable_sync_clock(NULL);
- queue_work(time_sync_wq, &stp_work);
+ return 1;
}
/*
* have matching CTN ids and have a valid stratum-1 configuration
* but the configurations do not match.
*/
-void stp_island_check(void)
+int stp_island_check(void)
{
disable_sync_clock(NULL);
- queue_work(time_sync_wq, &stp_work);
+ return 1;
}
+void stp_queue_work(void)
+{
+ queue_work(time_sync_wq, &stp_work);
+}
static int stp_sync_clock(void *data)
{
struct mask_info *socket,
int one_socket_per_cpu)
{
+ struct cpu_topology_s390 *topo;
unsigned int core;
for_each_set_bit(core, &tl_core->mask[0], TOPOLOGY_CORE_BITS) {
if (lcpu < 0)
continue;
for (i = 0; i <= smp_cpu_mtid; i++) {
- per_cpu(cpu_topology, lcpu + i).book_id = book->id;
- per_cpu(cpu_topology, lcpu + i).core_id = rcore;
- per_cpu(cpu_topology, lcpu + i).thread_id = lcpu + i;
+ topo = &per_cpu(cpu_topology, lcpu + i);
+ topo->book_id = book->id;
+ topo->core_id = rcore;
+ topo->thread_id = lcpu + i;
cpumask_set_cpu(lcpu + i, &book->mask);
cpumask_set_cpu(lcpu + i, &socket->mask);
if (one_socket_per_cpu)
- per_cpu(cpu_topology, lcpu + i).socket_id = rcore;
+ topo->socket_id = rcore;
else
- per_cpu(cpu_topology, lcpu + i).socket_id = socket->id;
+ topo->socket_id = socket->id;
smp_cpu_set_polarization(lcpu + i, tl_core->pp);
}
if (one_socket_per_cpu)
static void update_cpu_masks(void)
{
+ struct cpu_topology_s390 *topo;
int cpu;
for_each_possible_cpu(cpu) {
- per_cpu(cpu_topology, cpu).thread_mask = cpu_thread_map(cpu);
- per_cpu(cpu_topology, cpu).core_mask = cpu_group_map(&socket_info, cpu);
- per_cpu(cpu_topology, cpu).book_mask = cpu_group_map(&book_info, cpu);
+ topo = &per_cpu(cpu_topology, cpu);
+ topo->thread_mask = cpu_thread_map(cpu);
+ topo->core_mask = cpu_group_map(&socket_info, cpu);
+ topo->book_mask = cpu_group_map(&book_info, cpu);
if (!MACHINE_HAS_TOPOLOGY) {
- per_cpu(cpu_topology, cpu).thread_id = cpu;
- per_cpu(cpu_topology, cpu).core_id = cpu;
- per_cpu(cpu_topology, cpu).socket_id = cpu;
- per_cpu(cpu_topology, cpu).book_id = cpu;
+ topo->thread_id = cpu;
+ topo->core_id = cpu;
+ topo->socket_id = cpu;
+ topo->book_id = cpu;
}
}
numa_update_cpu_topology();
--- /dev/null
+/*
+ * Tracepoint definitions for s390
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/percpu.h>
+#define CREATE_TRACE_POINTS
+#include <asm/trace/diag.h>
+
+EXPORT_TRACEPOINT_SYMBOL(diagnose);
+
+static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
+
+void trace_diagnose_norecursion(int diag_nr)
+{
+ unsigned long flags;
+ unsigned int *depth;
+
+ local_irq_save(flags);
+ depth = this_cpu_ptr(&diagnose_trace_depth);
+ if (*depth == 0) {
+ (*depth)++;
+ trace_diagnose(diag_nr);
+ (*depth)--;
+ }
+ local_irq_restore(flags);
+}
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/api.h>
#include "entry.h"
int show_unhandled_signals = 1;
DO_ERROR_INFO(specification_exception, SIGILL, ILL_ILLOPN,
"specification exception");
-int alloc_vector_registers(struct task_struct *tsk)
-{
- __vector128 *vxrs;
- freg_t *fprs;
-
- /* Allocate vector register save area. */
- vxrs = kzalloc(sizeof(__vector128) * __NUM_VXRS,
- GFP_KERNEL|__GFP_REPEAT);
- if (!vxrs)
- return -ENOMEM;
- preempt_disable();
- if (tsk == current)
- save_fpu_regs();
- /* Copy the 16 floating point registers */
- convert_fp_to_vx(vxrs, tsk->thread.fpu.fprs);
- fprs = tsk->thread.fpu.fprs;
- tsk->thread.fpu.vxrs = vxrs;
- tsk->thread.fpu.flags |= FPU_USE_VX;
- kfree(fprs);
- preempt_enable();
- return 0;
-}
-
void vector_exception(struct pt_regs *regs)
{
int si_code, vic;
do_trap(regs, SIGFPE, si_code, "vector exception");
}
-static int __init disable_vector_extension(char *str)
-{
- S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX;
- return 1;
-}
-__setup("novx", disable_vector_extension);
-
void data_exception(struct pt_regs *regs)
{
__u16 __user *location;
location = get_trap_ip(regs);
save_fpu_regs();
- /* Check for vector register enablement */
- if (MACHINE_HAS_VX && !is_vx_task(current) &&
- (current->thread.fpu.fpc & FPC_DXC_MASK) == 0xfe00) {
- alloc_vector_registers(current);
- /* Vector data exception is suppressing, rewind psw. */
- regs->psw.addr = __rewind_psw(regs->psw, regs->int_code >> 16);
- clear_pt_regs_flag(regs, PIF_PER_TRAP);
- return;
- }
if (current->thread.fpu.fpc & FPC_DXC_MASK)
signal = SIGFPE;
else
get_page(virt_to_page(vdso_data));
- smp_wmb();
+ smp_mb();
return 0;
}
static inline void save_fpu_to(struct fpu *dst)
{
dst->fpc = current->thread.fpu.fpc;
- dst->flags = current->thread.fpu.flags;
dst->regs = current->thread.fpu.regs;
}
static inline void load_fpu_from(struct fpu *from)
{
current->thread.fpu.fpc = from->fpc;
- current->thread.fpu.flags = from->flags;
current->thread.fpu.regs = from->regs;
}
if (test_kvm_facility(vcpu->kvm, 129)) {
current->thread.fpu.fpc = vcpu->run->s.regs.fpc;
- current->thread.fpu.flags = FPU_USE_VX;
/*
* Use the register save area in the SIE-control block
* for register restore and save in kvm_arch_vcpu_put()
*/
current->thread.fpu.vxrs =
(__vector128 *)&vcpu->run->s.regs.vrs;
- /* Always enable the vector extension for KVM */
- __ctl_set_vx();
} else
load_fpu_from(&vcpu->arch.guest_fpregs);
* registers and the FPC value and store them in the
* guest_fpregs structure.
*/
- WARN_ON(!is_vx_task(current)); /* XXX remove later */
vcpu->arch.guest_fpregs.fpc = current->thread.fpu.fpc;
convert_vx_to_fp(vcpu->arch.guest_fpregs.fprs,
current->thread.fpu.vxrs);
#include <linux/module.h>
#include <linux/irqflags.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <asm/vtimer.h>
#include <asm/div64.h>
+#include <asm/idle.h>
void __delay(unsigned long loops)
{
static void __udelay_disabled(unsigned long long usecs)
{
- unsigned long cr0, cr6, new;
- u64 clock_saved, end;
+ unsigned long cr0, cr0_new, psw_mask;
+ struct s390_idle_data idle;
+ u64 end;
end = get_tod_clock() + (usecs << 12);
- clock_saved = local_tick_disable();
__ctl_store(cr0, 0, 0);
- __ctl_store(cr6, 6, 6);
- new = (cr0 & 0xffff00e0) | 0x00000800;
- __ctl_load(new , 0, 0);
- new = 0;
- __ctl_load(new, 6, 6);
- lockdep_off();
- do {
- set_clock_comparator(end);
- enabled_wait();
- } while (get_tod_clock_fast() < end);
- lockdep_on();
+ cr0_new = cr0 & ~CR0_IRQ_SUBCLASS_MASK;
+ cr0_new |= (1UL << (63 - 52)); /* enable clock comparator irq */
+ __ctl_load(cr0_new, 0, 0);
+ psw_mask = __extract_psw() | PSW_MASK_EXT | PSW_MASK_WAIT;
+ set_clock_comparator(end);
+ set_cpu_flag(CIF_IGNORE_IRQ);
+ psw_idle(&idle, psw_mask);
+ clear_cpu_flag(CIF_IGNORE_IRQ);
+ set_clock_comparator(S390_lowcore.clock_comparator);
__ctl_load(cr0, 0, 0);
- __ctl_load(cr6, 6, 6);
- local_tick_enable(clock_saved);
}
static void __udelay_enabled(unsigned long long usecs)
/*
* MSB0 numbered special bitops handling.
*
- * On s390x the bits are numbered:
+ * The bits are numbered:
* |0..............63|64............127|128...........191|192...........255|
- * and on s390:
- * |0.....31|32....63|64....95|96...127|128..159|160..191|192..223|224..255|
*
* The reason for this bit numbering is the fact that the hardware sets bits
* in a bitmap starting at bit 0 (MSB) and we don't want to scan the bitmap
}
old = ACCESS_ONCE(rw->lock);
owner = ACCESS_ONCE(rw->owner);
- smp_rmb();
+ smp_mb();
if ((int) old >= 0) {
prev = __RAW_LOCK(&rw->lock, 0x80000000, __RAW_OP_OR);
old = prev;
_raw_compare_and_swap(&rw->lock, old, old | 0x80000000))
prev = old;
else
- smp_rmb();
+ smp_mb();
if ((old & 0x7fffffff) == 0 && (int) prev >= 0)
break;
if (MACHINE_HAS_CAD)
#include <linux/bootmem.h>
#include <linux/ctype.h>
#include <linux/ioport.h>
+#include <asm/diag.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/ebcdic.h>
ry = DCSS_FINDSEGX;
strcpy(name, "dummy");
+ diag_stat_inc(DIAG_STAT_X064);
asm volatile(
" diag %0,%1,0x64\n"
"0: ipm %2\n"
ry = (unsigned long) *func;
/* 64-bit Diag x'64' new subcode, keep in 64-bit addressing mode */
+ diag_stat_inc(DIAG_STAT_X064);
if (*func > DCSS_SEGEXT)
asm volatile(
" diag %0,%1,0x64\n"
#include <linux/uaccess.h>
#include <linux/hugetlb.h>
#include <asm/asm-offsets.h>
+#include <asm/diag.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
.reffcode = 0,
.refdwlen = 5,
.refversn = 2,
- .refgaddr = __LC_CURRENT_PID,
+ .refgaddr = __LC_LPP,
.refselmk = 1ULL << 48,
.refcmpmk = 1ULL << 48,
.reserved = __PF_RES_FIELD };
if (pfault_disable)
return -1;
+ diag_stat_inc(DIAG_STAT_X258);
asm volatile(
" diag %1,%0,0x258\n"
"0: j 2f\n"
if (pfault_disable)
return;
+ diag_stat_inc(DIAG_STAT_X258);
asm volatile(
" diag %0,0,0x258\n"
"0:\n"
return;
inc_irq_stat(IRQEXT_PFL);
/* Get the token (= pid of the affected task). */
- pid = param64;
+ pid = param64 & LPP_PFAULT_PID_MASK;
rcu_read_lock();
tsk = find_task_by_pid_ns(pid, &init_pid_ns);
if (tsk)
pmd_val(pmd) |= (pte_val(pte) & _PAGE_PROTECT);
pmd_val(pmd) |= (pte_val(pte) & _PAGE_DIRTY) << 10;
pmd_val(pmd) |= (pte_val(pte) & _PAGE_YOUNG) << 10;
+ pmd_val(pmd) |= (pte_val(pte) & _PAGE_SOFT_DIRTY) << 13;
} else
pmd_val(pmd) = _SEGMENT_ENTRY_INVALID;
return pmd;
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT);
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) >> 10;
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) >> 10;
+ pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_SOFT_DIRTY) >> 13;
} else
pte_val(pte) = _PAGE_INVALID;
return pte;
*/
static unsigned long emu_setup_size_adjust(unsigned long size)
{
+ unsigned long size_new;
+
size = size ? : CONFIG_EMU_SIZE;
- size = roundup(size, memory_block_size_bytes());
- return size;
+ size_new = roundup(size, memory_block_size_bytes());
+ if (size_new == size)
+ return size;
+ pr_warn("Increasing memory stripe size from %ld MB to %ld MB\n",
+ size >> 20, size_new >> 20);
+ return size_new;
}
/*
static inline void zpci_err_insn(u8 cc, u8 status, u64 req, u64 offset)
{
struct {
- u8 cc;
- u8 status;
u64 req;
u64 offset;
- } data = {cc, status, req, offset};
+ u8 cc;
+ u8 status;
+ } __packed data = {req, offset, cc, status};
zpci_err_hex(&data, sizeof(data));
}
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, void *from);
+#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE)
struct page;
struct vm_area_struct;
.blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
.setkey = aes_set_key,
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
.blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
.setkey = aes_set_key,
.encrypt = ctr_crypt,
.decrypt = ctr_crypt,
.blkcipher = {
.min_keysize = CAMELLIA_MIN_KEY_SIZE,
.max_keysize = CAMELLIA_MAX_KEY_SIZE,
+ .ivsize = CAMELLIA_BLOCK_SIZE,
.setkey = camellia_set_key,
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
.blkcipher = {
.min_keysize = DES_KEY_SIZE,
.max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
.setkey = des_set_key,
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
.blkcipher = {
.min_keysize = DES3_EDE_KEY_SIZE,
.max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
.setkey = des3_ede_set_key,
.encrypt = cbc3_encrypt,
.decrypt = cbc3_decrypt,
* Most-Recently-Used, primary,
* implicit
*/
-#define ASI_ST_BLKINIT_MRU_S 0xf2 /* (NG4) init-store, twin load,
+#define ASI_ST_BLKINIT_MRU_S 0xf3 /* (NG4) init-store, twin load,
* Most-Recently-Used, secondary,
* implicit
*/
* Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
+#include <linux/linkage.h>
+
#include <asm/asi.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/visasm.h>
#include <asm/thread_info.h>
- .text
- .globl VISenter, VISenterhalf
-
/* On entry: %o5=current FPRS value, %g7 is callers address */
/* May clobber %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
/* Nothing special need be done here to handle pre-emption, this
* FPU save/restore mechanism is already preemption safe.
*/
-
+ .text
.align 32
-VISenter:
+ENTRY(VISenter)
ldub [%g6 + TI_FPDEPTH], %g1
brnz,a,pn %g1, 1f
cmp %g1, 1
.align 32
80: jmpl %g7 + %g0, %g0
nop
+ENDPROC(VISenter)
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_JUMP_LABEL
# FIXME: investigate whether we need/want these options.
# select HAVE_IOREMAP_PROT
--- /dev/null
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+#ifndef __ASM_TILE_INSN_H
+#define __ASM_TILE_INSN_H
+
+#include <arch/opcode.h>
+
+static inline tilegx_bundle_bits NOP(void)
+{
+ return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+ create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+ create_Opcode_X0(RRR_0_OPCODE_X0) |
+ create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) |
+ create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) |
+ create_Opcode_X1(RRR_0_OPCODE_X1);
+}
+
+static inline tilegx_bundle_bits tilegx_gen_branch(unsigned long pc,
+ unsigned long addr,
+ bool link)
+{
+ tilegx_bundle_bits opcode_x0, opcode_x1;
+ long pcrel_by_instr = (addr - pc) >> TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES;
+
+ if (link) {
+ /* opcode: jal addr */
+ opcode_x1 =
+ create_Opcode_X1(JUMP_OPCODE_X1) |
+ create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) |
+ create_JumpOff_X1(pcrel_by_instr);
+ } else {
+ /* opcode: j addr */
+ opcode_x1 =
+ create_Opcode_X1(JUMP_OPCODE_X1) |
+ create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) |
+ create_JumpOff_X1(pcrel_by_instr);
+ }
+
+ /* opcode: fnop */
+ opcode_x0 =
+ create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+ create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+ create_Opcode_X0(RRR_0_OPCODE_X0);
+
+ return opcode_x1 | opcode_x0;
+}
+
+#endif /* __ASM_TILE_INSN_H */
--- /dev/null
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_JUMP_LABEL_H
+#define _ASM_TILE_JUMP_LABEL_H
+
+#include <arch/opcode.h>
+
+#define JUMP_LABEL_NOP_SIZE TILE_BUNDLE_SIZE_IN_BYTES
+
+static __always_inline bool arch_static_branch(struct static_key *key,
+ bool branch)
+{
+ asm_volatile_goto("1:\n\t"
+ "nop" "\n\t"
+ ".pushsection __jump_table, \"aw\"\n\t"
+ ".quad 1b, %l[l_yes], %0 + %1 \n\t"
+ ".popsection\n\t"
+ : : "i" (key), "i" (branch) : : l_yes);
+ return false;
+l_yes:
+ return true;
+}
+
+static __always_inline bool arch_static_branch_jump(struct static_key *key,
+ bool branch)
+{
+ asm_volatile_goto("1:\n\t"
+ "j %l[l_yes]" "\n\t"
+ ".pushsection __jump_table, \"aw\"\n\t"
+ ".quad 1b, %l[l_yes], %0 + %1 \n\t"
+ ".popsection\n\t"
+ : : "i" (key), "i" (branch) : : l_yes);
+ return false;
+l_yes:
+ return true;
+}
+
+typedef u64 jump_label_t;
+
+struct jump_entry {
+ jump_label_t code;
+ jump_label_t target;
+ jump_label_t key;
+};
+
+#endif /* _ASM_TILE_JUMP_LABEL_H */
#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn((void *)(kaddr)))
#define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page))
+/*
+ * The kernel text is mapped at MEM_SV_START as read-only. To allow
+ * modifying kernel text, it is also mapped at PAGE_OFFSET as read-write.
+ * This macro converts a kernel address to its writable kernel text mapping,
+ * which is used to modify the text code on a running kernel by kgdb,
+ * ftrace, kprobe, jump label, etc.
+ */
+#define ktext_writable_addr(kaddr) \
+ ((unsigned long)(kaddr) - MEM_SV_START + PAGE_OFFSET)
+
struct mm_struct;
extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
extern pte_t *virt_to_kpte(unsigned long kaddr);
/* Nothing for now */
}
-extern int do_work_pending(struct pt_regs *regs, u32 flags);
+extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags);
/*
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_NOHZ (1<<TIF_NOHZ)
+/* Work to do as we loop to exit to user space. */
+#define _TIF_WORK_MASK \
+ (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+ _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME)
+
/* Work to do on any return to user space. */
#define _TIF_ALLWORK_MASK \
- (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_SINGLESTEP | \
- _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME | _TIF_NOHZ)
+ (_TIF_WORK_MASK | _TIF_SINGLESTEP | _TIF_NOHZ)
/* Work to do at syscall entry. */
#define _TIF_SYSCALL_ENTRY_WORK \
obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-y += vdso/
#include <asm/cacheflush.h>
#include <asm/ftrace.h>
#include <asm/sections.h>
+#include <asm/insn.h>
#include <arch/opcode.h>
#ifdef CONFIG_DYNAMIC_FTRACE
-static inline tilegx_bundle_bits NOP(void)
-{
- return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
- create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
- create_Opcode_X0(RRR_0_OPCODE_X0) |
- create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) |
- create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) |
- create_Opcode_X1(RRR_0_OPCODE_X1);
-}
-
static int machine_stopped __read_mostly;
int ftrace_arch_code_modify_prepare(void)
return -EINVAL;
/* Operate on writable kernel text mapping. */
- pc_wr = pc - MEM_SV_START + PAGE_OFFSET;
+ pc_wr = ktext_writable_addr(pc);
if (probe_kernel_write((void *)pc_wr, &new, MCOUNT_INSN_SIZE))
return -EPERM;
.Lresume_userspace:
FEEDBACK_REENTER(interrupt_return)
- /*
- * Use r33 to hold whether we have already loaded the callee-saves
- * into ptregs. We don't want to do it twice in this loop, since
- * then we'd clobber whatever changes are made by ptrace, etc.
- * Get base of stack in r32.
- */
- {
- GET_THREAD_INFO(r32)
- movei r33, 0
- }
-
-.Lretry_work_pending:
/*
* Disable interrupts so as to make sure we don't
* miss an interrupt that sets any of the thread flags (like
IRQ_DISABLE(r20, r21)
TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */
-
- /* Check to see if there is any work to do before returning to user. */
+ /*
+ * See if there are any work items (including single-shot items)
+ * to do. If so, save the callee-save registers to pt_regs
+ * and then dispatch to C code.
+ */
+ GET_THREAD_INFO(r21)
{
- addi r29, r32, THREAD_INFO_FLAGS_OFFSET
- moveli r1, lo16(_TIF_ALLWORK_MASK)
+ addi r22, r21, THREAD_INFO_FLAGS_OFFSET
+ moveli r20, lo16(_TIF_ALLWORK_MASK)
}
{
- lw r29, r29
- auli r1, r1, ha16(_TIF_ALLWORK_MASK)
+ lw r22, r22
+ auli r20, r20, ha16(_TIF_ALLWORK_MASK)
}
- and r1, r29, r1
- bzt r1, .Lrestore_all
-
- /*
- * Make sure we have all the registers saved for signal
- * handling, notify-resume, or single-step. Call out to C
- * code to figure out exactly what we need to do for each flag bit,
- * then if necessary, reload the flags and recheck.
- */
+ and r1, r22, r20
{
PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
- bnz r33, 1f
+ bzt r1, .Lrestore_all
}
push_extra_callee_saves r0
- movei r33, 1
-1: jal do_work_pending
- bnz r0, .Lretry_work_pending
+ jal prepare_exit_to_usermode
/*
* In the NMI case we
FEEDBACK_REENTER(ret_from_kernel_thread)
{
movei r30, 0 /* not an NMI */
- j .Lresume_userspace /* jump into middle of interrupt_return */
+ j interrupt_return
}
STD_ENDPROC(ret_from_kernel_thread)
.Lresume_userspace:
FEEDBACK_REENTER(interrupt_return)
- /*
- * Use r33 to hold whether we have already loaded the callee-saves
- * into ptregs. We don't want to do it twice in this loop, since
- * then we'd clobber whatever changes are made by ptrace, etc.
- */
- {
- movei r33, 0
- move r32, sp
- }
-
- /* Get base of stack in r32. */
- EXTRACT_THREAD_INFO(r32)
-
-.Lretry_work_pending:
/*
* Disable interrupts so as to make sure we don't
* miss an interrupt that sets any of the thread flags (like
IRQ_DISABLE(r20, r21)
TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */
-
- /* Check to see if there is any work to do before returning to user. */
+ /*
+ * See if there are any work items (including single-shot items)
+ * to do. If so, save the callee-save registers to pt_regs
+ * and then dispatch to C code.
+ */
+ move r21, sp
+ EXTRACT_THREAD_INFO(r21)
{
- addi r29, r32, THREAD_INFO_FLAGS_OFFSET
- moveli r1, hw1_last(_TIF_ALLWORK_MASK)
+ addi r22, r21, THREAD_INFO_FLAGS_OFFSET
+ moveli r20, hw1_last(_TIF_ALLWORK_MASK)
}
{
- ld r29, r29
- shl16insli r1, r1, hw0(_TIF_ALLWORK_MASK)
+ ld r22, r22
+ shl16insli r20, r20, hw0(_TIF_ALLWORK_MASK)
}
- and r1, r29, r1
- beqzt r1, .Lrestore_all
-
- /*
- * Make sure we have all the registers saved for signal
- * handling or notify-resume. Call out to C code to figure out
- * exactly what we need to do for each flag bit, then if
- * necessary, reload the flags and recheck.
- */
+ and r1, r22, r20
{
PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
- bnez r33, 1f
+ beqzt r1, .Lrestore_all
}
push_extra_callee_saves r0
- movei r33, 1
-1: jal do_work_pending
- bnez r0, .Lretry_work_pending
+ jal prepare_exit_to_usermode
/*
* In the NMI case we
FEEDBACK_REENTER(ret_from_kernel_thread)
{
movei r30, 0 /* not an NMI */
- j .Lresume_userspace /* jump into middle of interrupt_return */
+ j interrupt_return
}
STD_ENDPROC(ret_from_kernel_thread)
--- /dev/null
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * jump label TILE-Gx support
+ */
+
+#include <linux/jump_label.h>
+#include <linux/memory.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/insn.h>
+
+#ifdef HAVE_JUMP_LABEL
+
+static void __jump_label_transform(struct jump_entry *e,
+ enum jump_label_type type)
+{
+ tilegx_bundle_bits opcode;
+ /* Operate on writable kernel text mapping. */
+ unsigned long pc_wr = ktext_writable_addr(e->code);
+
+ if (type == JUMP_LABEL_JMP)
+ opcode = tilegx_gen_branch(e->code, e->target, false);
+ else
+ opcode = NOP();
+
+ *(tilegx_bundle_bits *)pc_wr = opcode;
+ /* Make sure that above mem writes were issued towards the memory. */
+ smp_wmb();
+}
+
+void arch_jump_label_transform(struct jump_entry *e,
+ enum jump_label_type type)
+{
+ get_online_cpus();
+ mutex_lock(&text_mutex);
+
+ __jump_label_transform(e, type);
+ flush_icache_range(e->code, e->code + sizeof(tilegx_bundle_bits));
+
+ mutex_unlock(&text_mutex);
+ put_online_cpus();
+}
+
+__init_or_module void arch_jump_label_transform_static(struct jump_entry *e,
+ enum jump_label_type type)
+{
+ __jump_label_transform(e, type);
+}
+
+#endif /* HAVE_JUMP_LABEL */
unsigned long ret = 0;
if (core_kernel_text(addr))
- ret = addr - MEM_SV_START + PAGE_OFFSET;
+ ret = ktext_writable_addr(addr);
else if (is_module_text_address(addr))
ret = addr;
else
unsigned long addr_wr;
/* Operate on writable kernel text mapping. */
- addr_wr = (unsigned long)p->addr - MEM_SV_START + PAGE_OFFSET;
+ addr_wr = ktext_writable_addr(p->addr);
if (probe_kernel_write((void *)addr_wr, &breakpoint_insn,
sizeof(breakpoint_insn)))
unsigned long addr_wr;
/* Operate on writable kernel text mapping. */
- addr_wr = (unsigned long)kp->addr - MEM_SV_START + PAGE_OFFSET;
+ addr_wr = ktext_writable_addr(kp->addr);
if (probe_kernel_write((void *)addr_wr, &kp->opcode,
sizeof(kp->opcode)))
/*
* This routine is called on return from interrupt if any of the
- * TIF_WORK_MASK flags are set in thread_info->flags. It is
- * entered with interrupts disabled so we don't miss an event
- * that modified the thread_info flags. If any flag is set, we
- * handle it and return, and the calling assembly code will
- * re-disable interrupts, reload the thread flags, and call back
- * if more flags need to be handled.
- *
- * We return whether we need to check the thread_info flags again
- * or not. Note that we don't clear TIF_SINGLESTEP here, so it's
- * important that it be tested last, and then claim that we don't
- * need to recheck the flags.
+ * TIF_ALLWORK_MASK flags are set in thread_info->flags. It is
+ * entered with interrupts disabled so we don't miss an event that
+ * modified the thread_info flags. We loop until all the tested flags
+ * are clear. Note that the function is called on certain conditions
+ * that are not listed in the loop condition here (e.g. SINGLESTEP)
+ * which guarantees we will do those things once, and redo them if any
+ * of the other work items is re-done, but won't continue looping if
+ * all the other work is done.
*/
-int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
+void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags)
{
- /* If we enter in kernel mode, do nothing and exit the caller loop. */
- if (!user_mode(regs))
- return 0;
+ if (WARN_ON(!user_mode(regs)))
+ return;
- user_exit();
+ do {
+ local_irq_enable();
- /* Enable interrupts; they are disabled again on return to caller. */
- local_irq_enable();
+ if (thread_info_flags & _TIF_NEED_RESCHED)
+ schedule();
- if (thread_info_flags & _TIF_NEED_RESCHED) {
- schedule();
- return 1;
- }
#if CHIP_HAS_TILE_DMA()
- if (thread_info_flags & _TIF_ASYNC_TLB) {
- do_async_page_fault(regs);
- return 1;
- }
+ if (thread_info_flags & _TIF_ASYNC_TLB)
+ do_async_page_fault(regs);
#endif
- if (thread_info_flags & _TIF_SIGPENDING) {
- do_signal(regs);
- return 1;
- }
- if (thread_info_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- return 1;
- }
- if (thread_info_flags & _TIF_SINGLESTEP)
+
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+
+ local_irq_disable();
+ thread_info_flags = READ_ONCE(current_thread_info()->flags);
+
+ } while (thread_info_flags & _TIF_WORK_MASK);
+
+ if (thread_info_flags & _TIF_SINGLESTEP) {
single_step_once(regs);
+#ifndef __tilegx__
+ /*
+ * FIXME: on tilepro, since we enable interrupts in
+ * this routine, it's possible that we miss a signal
+ * or other asynchronous event.
+ */
+ local_irq_disable();
+#endif
+ }
user_enter();
-
- return 0;
}
unsigned long get_wchan(struct task_struct *p)
.set_next_event = tile_timer_set_next_event,
.set_state_shutdown = tile_timer_shutdown,
.set_state_oneshot = tile_timer_shutdown,
+ .set_state_oneshot_stopped = tile_timer_shutdown,
.tick_resume = tile_timer_shutdown,
};
USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \
$(ARCH_INCLUDE) $(MODE_INCLUDE) $(filter -I%,$(CFLAGS)) \
- -D_FILE_OFFSET_BITS=64 -idirafter include \
- -D__KERNEL__ -D__UM_HOST__
+ -D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \
+ -idirafter $(obj)/include -D__KERNEL__ -D__UM_HOST__
#This will adjust *FLAGS accordingly to the platform.
include $(ARCH_DIR)/Makefile-os-$(OS)
show_regs(container_of(regs, struct pt_regs, regs));
panic("Segfault with no mm");
}
- else if (!is_user && address < TASK_SIZE) {
+ else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
show_regs(container_of(regs, struct pt_regs, regs));
panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
address, ip);
"ret = %d\n", -n);
ret = n;
}
- CATCH_EINTR(waitpid(pid, NULL, __WCLONE));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
out_free2:
return err;
}
if (stack_out == NULL) {
- CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE));
+ CATCH_EINTR(pid = waitpid(pid, &status, __WALL));
if (pid < 0) {
err = -errno;
printk(UM_KERN_ERR "run_helper_thread - wait failed, "
int helper_wait(int pid)
{
int ret, status;
- int wflags = __WCLONE;
+ int wflags = __WALL;
CATCH_EINTR(ret = waitpid(pid, &status, wflags));
if (ret < 0) {
config X86_PAE
bool "PAE (Physical Address Extension) Support"
depends on X86_32 && !HIGHMEM4G
+ select SWIOTLB
---help---
PAE is required for NX support, and furthermore enables
larger swapspace support for non-overcommit purposes. It
bool conout_found = false;
void *dummy = NULL;
u32 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop32);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query32(gop32, &info, &size, &fb_base);
+ status = __gop_query32(gop32, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
bool conout_found = false;
void *dummy = NULL;
u64 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop64);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query64(gop64, &info, &size, &fb_base);
+ status = __gop_query64(gop64, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
{
const char *feature_name;
+ if (!cpu_has_avx || !cpu_has_aes || !cpu_has_osxsave) {
+ pr_info("AVX or AES-NI instructions are not detected.\n");
+ return -ENODEV;
+ }
+
if (!cpu_has_xfeatures(XSTATE_SSE | XSTATE_YMM, &feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
int kvm_is_in_guest(void);
-int __x86_set_memory_region(struct kvm *kvm,
- const struct kvm_userspace_memory_region *mem);
-int x86_set_memory_region(struct kvm *kvm,
- const struct kvm_userspace_memory_region *mem);
+int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size);
+int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size);
bool kvm_vcpu_is_reset_bsp(struct kvm_vcpu *vcpu);
bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu);
return pmd_set_flags(pmd, _PAGE_SOFT_DIRTY);
}
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+ return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
+{
+ return pmd_clear_flags(pmd, _PAGE_SOFT_DIRTY);
+}
+
#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
/*
function. */
#define __HAVE_ARCH_MEMCPY 1
+extern void *memcpy(void *to, const void *from, size_t len);
extern void *__memcpy(void *to, const void *from, size_t len);
#ifndef CONFIG_KMEMCHECK
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
-extern void *memcpy(void *to, const void *from, size_t len);
-#else
+#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4
#define memcpy(dst, src, len) \
({ \
size_t __len = (len); \
mask = apic->target_cpus();
chip = irq_data_get_irq_chip(idata);
- chip->irq_set_affinity(idata, mask, false);
+ /* Might be lapic_chip for irq 0 */
+ if (chip->irq_set_affinity)
+ chip->irq_set_affinity(idata, mask, false);
}
}
#endif
struct irq_data *irq_data;
struct mp_chip_data *data;
struct irq_alloc_info *info = arg;
+ unsigned long flags;
if (!info || nr_irqs > 1)
return -EINVAL;
cfg = irqd_cfg(irq_data);
add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+
+ local_irq_save(flags);
if (info->ioapic_entry)
mp_setup_entry(cfg, data, info->ioapic_entry);
mp_register_handler(virq, data->trigger);
if (virq < nr_legacy_irqs())
legacy_pic->mask(virq);
+ local_irq_restore(flags);
apic_printk(APIC_VERBOSE, KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
bool arch_dma_alloc_attrs(struct device **dev, gfp_t *gfp)
{
+ if (!*dev)
+ *dev = &x86_dma_fallback_dev;
+
*gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
*gfp = dma_alloc_coherent_gfp_flags(*dev, *gfp);
- if (!*dev)
- *dev = &x86_dma_fallback_dev;
if (!is_device_dma_capable(*dev))
return false;
return true;
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
memcpy(dst, src, arch_task_struct_size);
+#ifdef CONFIG_VM86
+ dst->thread.vm86 = NULL;
+#endif
return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
}
if (sp < bottom || sp > top)
return 0;
- fp = READ_ONCE(*(unsigned long *)sp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
do {
if (fp < bottom || fp > top)
return 0;
- ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long)));
+ ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip))
return ip;
- fp = READ_ONCE(*(unsigned long *)fp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
return 0;
}
clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
KERNEL_PGD_PTRS);
+
+ /*
+ * sync back low identity map too. It is used for example
+ * in the 32-bit EFI stub.
+ */
+ clone_pgd_range(initial_page_table,
+ swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+ KERNEL_PGD_PTRS);
#endif
tboot_probe();
*/
#define UDELAY_10MS_DEFAULT 10000
-static unsigned int init_udelay = UDELAY_10MS_DEFAULT;
+static unsigned int init_udelay = INT_MAX;
static int __init cpu_init_udelay(char *str)
{
static void __init smp_quirk_init_udelay(void)
{
/* if cmdline changed it from default, leave it alone */
- if (init_udelay != UDELAY_10MS_DEFAULT)
+ if (init_udelay != INT_MAX)
return;
/* if modern processor, use no delay */
if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
init_udelay = 0;
+
+ /* else, use legacy delay */
+ init_udelay = UDELAY_10MS_DEFAULT;
}
/*
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(300);
pr_debug("Startup point 1\n");
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(200);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
u64 val, cr0, cr4;
u32 base3;
u16 selector;
- int i;
+ int i, r;
for (i = 0; i < 16; i++)
*reg_write(ctxt, i) = GET_SMSTATE(u64, smbase, 0x7ff8 - i * 8);
dt.address = GET_SMSTATE(u64, smbase, 0x7e68);
ctxt->ops->set_gdt(ctxt, &dt);
+ r = rsm_enter_protected_mode(ctxt, cr0, cr4);
+ if (r != X86EMUL_CONTINUE)
+ return r;
+
for (i = 0; i < 6; i++) {
- int r = rsm_load_seg_64(ctxt, smbase, i);
+ r = rsm_load_seg_64(ctxt, smbase, i);
if (r != X86EMUL_CONTINUE)
return r;
}
- return rsm_enter_protected_mode(ctxt, cr0, cr4);
+ return X86EMUL_CONTINUE;
}
static int em_rsm(struct x86_emulate_ctxt *ctxt)
static int alloc_apic_access_page(struct kvm *kvm)
{
struct page *page;
- struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
mutex_lock(&kvm->slots_lock);
if (kvm->arch.apic_access_page_done)
goto out;
- kvm_userspace_mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT;
- kvm_userspace_mem.flags = 0;
- kvm_userspace_mem.guest_phys_addr = APIC_DEFAULT_PHYS_BASE;
- kvm_userspace_mem.memory_size = PAGE_SIZE;
- r = __x86_set_memory_region(kvm, &kvm_userspace_mem);
+ r = __x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT,
+ APIC_DEFAULT_PHYS_BASE, PAGE_SIZE);
if (r)
goto out;
{
/* Called with kvm->slots_lock held. */
- struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
BUG_ON(kvm->arch.ept_identity_pagetable_done);
- kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
- kvm_userspace_mem.flags = 0;
- kvm_userspace_mem.guest_phys_addr =
- kvm->arch.ept_identity_map_addr;
- kvm_userspace_mem.memory_size = PAGE_SIZE;
- r = __x86_set_memory_region(kvm, &kvm_userspace_mem);
+ r = __x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT,
+ kvm->arch.ept_identity_map_addr, PAGE_SIZE);
return r;
}
static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr)
{
int ret;
- struct kvm_userspace_memory_region tss_mem = {
- .slot = TSS_PRIVATE_MEMSLOT,
- .guest_phys_addr = addr,
- .memory_size = PAGE_SIZE * 3,
- .flags = 0,
- };
- ret = x86_set_memory_region(kvm, &tss_mem);
+ ret = x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, addr,
+ PAGE_SIZE * 3);
if (ret)
return ret;
kvm->arch.tss_addr = addr;
return 1;
}
+static inline bool kvm_vcpu_running(struct kvm_vcpu *vcpu)
+{
+ return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
+ !vcpu->arch.apf.halted);
+}
+
static int vcpu_run(struct kvm_vcpu *vcpu)
{
int r;
vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
for (;;) {
- if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
- !vcpu->arch.apf.halted)
+ if (kvm_vcpu_running(vcpu))
r = vcpu_enter_guest(vcpu);
else
r = vcpu_block(kvm, vcpu);
kvm_free_pit(kvm);
}
-int __x86_set_memory_region(struct kvm *kvm,
- const struct kvm_userspace_memory_region *mem)
+int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
{
int i, r;
+ unsigned long hva;
+ struct kvm_memslots *slots = kvm_memslots(kvm);
+ struct kvm_memory_slot *slot, old;
/* Called with kvm->slots_lock held. */
- BUG_ON(mem->slot >= KVM_MEM_SLOTS_NUM);
+ if (WARN_ON(id >= KVM_MEM_SLOTS_NUM))
+ return -EINVAL;
+
+ slot = id_to_memslot(slots, id);
+ if (size) {
+ if (WARN_ON(slot->npages))
+ return -EEXIST;
+
+ /*
+ * MAP_SHARED to prevent internal slot pages from being moved
+ * by fork()/COW.
+ */
+ hva = vm_mmap(NULL, 0, size, PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_ANONYMOUS, 0);
+ if (IS_ERR((void *)hva))
+ return PTR_ERR((void *)hva);
+ } else {
+ if (!slot->npages)
+ return 0;
+ hva = 0;
+ }
+
+ old = *slot;
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
- struct kvm_userspace_memory_region m = *mem;
+ struct kvm_userspace_memory_region m;
- m.slot |= i << 16;
+ m.slot = id | (i << 16);
+ m.flags = 0;
+ m.guest_phys_addr = gpa;
+ m.userspace_addr = hva;
+ m.memory_size = size;
r = __kvm_set_memory_region(kvm, &m);
if (r < 0)
return r;
}
+ if (!size) {
+ r = vm_munmap(old.userspace_addr, old.npages * PAGE_SIZE);
+ WARN_ON(r < 0);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(__x86_set_memory_region);
-int x86_set_memory_region(struct kvm *kvm,
- const struct kvm_userspace_memory_region *mem)
+int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
{
int r;
mutex_lock(&kvm->slots_lock);
- r = __x86_set_memory_region(kvm, mem);
+ r = __x86_set_memory_region(kvm, id, gpa, size);
mutex_unlock(&kvm->slots_lock);
return r;
* unless the the memory map has changed due to process exit
* or fd copying.
*/
- struct kvm_userspace_memory_region mem;
- memset(&mem, 0, sizeof(mem));
- mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT;
- x86_set_memory_region(kvm, &mem);
-
- mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
- x86_set_memory_region(kvm, &mem);
-
- mem.slot = TSS_PRIVATE_MEMSLOT;
- x86_set_memory_region(kvm, &mem);
+ x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, 0, 0);
+ x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT, 0, 0);
+ x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, 0, 0);
}
kvm_iommu_unmap_guest(kvm);
kfree(kvm->arch.vpic);
const struct kvm_userspace_memory_region *mem,
enum kvm_mr_change change)
{
- /*
- * Only private memory slots need to be mapped here since
- * KVM_SET_MEMORY_REGION ioctl is no longer supported.
- */
- if ((memslot->id >= KVM_USER_MEM_SLOTS) && (change == KVM_MR_CREATE)) {
- unsigned long userspace_addr;
-
- /*
- * MAP_SHARED to prevent internal slot pages from being moved
- * by fork()/COW.
- */
- userspace_addr = vm_mmap(NULL, 0, memslot->npages * PAGE_SIZE,
- PROT_READ | PROT_WRITE,
- MAP_SHARED | MAP_ANONYMOUS, 0);
-
- if (IS_ERR((void *)userspace_addr))
- return PTR_ERR((void *)userspace_addr);
-
- memslot->userspace_addr = userspace_addr;
- }
-
return 0;
}
{
int nr_mmu_pages = 0;
- if (change == KVM_MR_DELETE && old->id >= KVM_USER_MEM_SLOTS) {
- int ret;
-
- ret = vm_munmap(old->userspace_addr,
- old->npages * PAGE_SIZE);
- if (ret < 0)
- printk(KERN_WARNING
- "kvm_vm_ioctl_set_memory_region: "
- "failed to munmap memory\n");
- }
-
if (!kvm->arch.n_requested_mmu_pages)
nr_mmu_pages = kvm_mmu_calculate_mmu_pages(kvm);
kvm_mmu_invalidate_zap_all_pages(kvm);
}
+static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu)
+{
+ if (!list_empty_careful(&vcpu->async_pf.done))
+ return true;
+
+ if (kvm_apic_has_events(vcpu))
+ return true;
+
+ if (vcpu->arch.pv.pv_unhalted)
+ return true;
+
+ if (atomic_read(&vcpu->arch.nmi_queued))
+ return true;
+
+ if (test_bit(KVM_REQ_SMI, &vcpu->requests))
+ return true;
+
+ if (kvm_arch_interrupt_allowed(vcpu) &&
+ kvm_cpu_has_interrupt(vcpu))
+ return true;
+
+ return false;
+}
+
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
if (is_guest_mode(vcpu) && kvm_x86_ops->check_nested_events)
kvm_x86_ops->check_nested_events(vcpu, false);
- return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
- !vcpu->arch.apf.halted)
- || !list_empty_careful(&vcpu->async_pf.done)
- || kvm_apic_has_events(vcpu)
- || vcpu->arch.pv.pv_unhalted
- || atomic_read(&vcpu->arch.nmi_queued) ||
- (kvm_arch_interrupt_allowed(vcpu) &&
- kvm_cpu_has_interrupt(vcpu));
+ return kvm_vcpu_running(vcpu) || kvm_vcpu_has_events(vcpu);
}
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
#include <skas.h>
#include <sysdep/tls.h>
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
+static inline int modify_ldt (int func, void *ptr, unsigned long bytecount)
+{
+ return syscall(__NR_modify_ldt, func, ptr, bytecount);
+}
static long write_ldt_entry(struct mm_id *mm_idp, int func,
struct user_desc *desc, void **addr, int done)
q->queue_lock = &q->__queue_lock;
spin_unlock_irq(lock);
- bdi_destroy(&q->backing_dev_info);
+ bdi_unregister(&q->backing_dev_info);
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
bio_put(bio);
}
-/*
- * Ensure that max discard sectors doesn't overflow bi_size and hopefully
- * it is of the proper granularity as long as the granularity is a power
- * of two.
- */
-#define MAX_BIO_SECTORS ((1U << 31) >> 9)
-
/**
* blkdev_issue_discard - queue a discard
* @bdev: blockdev to issue discard for
DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q = bdev_get_queue(bdev);
int type = REQ_WRITE | REQ_DISCARD;
+ unsigned int granularity;
+ int alignment;
struct bio_batch bb;
struct bio *bio;
int ret = 0;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
+ /* Zero-sector (unknown) and one-sector granularities are the same. */
+ granularity = max(q->limits.discard_granularity >> 9, 1U);
+ alignment = (bdev_discard_alignment(bdev) >> 9) % granularity;
+
if (flags & BLKDEV_DISCARD_SECURE) {
if (!blk_queue_secdiscard(q))
return -EOPNOTSUPP;
blk_start_plug(&plug);
while (nr_sects) {
unsigned int req_sects;
- sector_t end_sect;
+ sector_t end_sect, tmp;
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
break;
}
- req_sects = min_t(sector_t, nr_sects, MAX_BIO_SECTORS);
+ /* Make sure bi_size doesn't overflow */
+ req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
+
+ /*
+ * If splitting a request, and the next starting sector would be
+ * misaligned, stop the discard at the previous aligned sector.
+ */
end_sect = sector + req_sects;
+ tmp = end_sect;
+ if (req_sects < nr_sects &&
+ sector_div(tmp, granularity) != alignment) {
+ end_sect = end_sect - alignment;
+ sector_div(end_sect, granularity);
+ end_sect = end_sect * granularity + alignment;
+ req_sects = end_sect - sector;
+ }
bio->bi_iter.bi_sector = sector;
bio->bi_end_io = bio_batch_end_io;
{
bt_free(&tags->bitmap_tags);
bt_free(&tags->breserved_tags);
+ free_cpumask_var(tags->cpumask);
kfree(tags);
}
int i;
for (i = 0; i < set->nr_hw_queues; i++) {
- if (set->tags[i]) {
+ if (set->tags[i])
blk_mq_free_rq_map(set, set->tags[i], i);
- free_cpumask_var(set->tags[i]->cpumask);
- }
}
kfree(set->tags);
struct request_queue *q =
container_of(kobj, struct request_queue, kobj);
+ bdi_exit(&q->backing_dev_info);
blkcg_exit_queue(q);
if (q->elevator) {
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
struct crypto_alg *base = &alg->halg.base;
if (alg->halg.digestsize > PAGE_SIZE / 8 ||
- alg->halg.statesize > PAGE_SIZE / 8)
+ alg->halg.statesize > PAGE_SIZE / 8 ||
+ alg->halg.statesize == 0)
return -EINVAL;
base->cra_type = &crypto_ahash_type;
crypto_alg_tested(larval->alg.cra_driver_name, 0);
}
- err = wait_for_completion_interruptible(&larval->completion);
+ err = wait_for_completion_killable(&larval->completion);
WARN_ON(err);
out:
struct crypto_larval *larval = (void *)alg;
long timeout;
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_killable_timeout(
&larval->completion, 60 * HZ);
alg = larval->adult;
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
err = PTR_ERR(alg);
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
ACPI_INIT_GLOBAL(u32, acpi_gbl_dsdt_index, ACPI_INVALID_TABLE_INDEX);
ACPI_INIT_GLOBAL(u32, acpi_gbl_facs_index, ACPI_INVALID_TABLE_INDEX);
ACPI_INIT_GLOBAL(u32, acpi_gbl_xfacs_index, ACPI_INVALID_TABLE_INDEX);
+ACPI_INIT_GLOBAL(u32, acpi_gbl_fadt_index, ACPI_INVALID_TABLE_INDEX);
#if (!ACPI_REDUCED_HARDWARE)
ACPI_GLOBAL(struct acpi_table_facs *, acpi_gbl_FACS);
/*
* tbfadt - FADT parse/convert/validate
*/
-void acpi_tb_parse_fadt(u32 table_index);
+void acpi_tb_parse_fadt(void);
void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length);
*/
acpi_status acpi_tb_initialize_facs(void);
-u8 acpi_tb_tables_loaded(void);
-
void
acpi_tb_print_table_header(acpi_physical_address address,
struct acpi_table_header *header);
/* ACPI tables must be present */
- if (!acpi_tb_tables_loaded()) {
+ if (acpi_gbl_fadt_index == ACPI_INVALID_TABLE_INDEX) {
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
*
* FUNCTION: acpi_tb_parse_fadt
*
- * PARAMETERS: table_index - Index for the FADT
+ * PARAMETERS: None
*
* RETURN: None
*
*
******************************************************************************/
-void acpi_tb_parse_fadt(u32 table_index)
+void acpi_tb_parse_fadt(void)
{
u32 length;
struct acpi_table_header *table;
* Get a local copy of the FADT and convert it to a common format
* Map entire FADT, assumed to be smaller than one page.
*/
- length = acpi_gbl_root_table_list.tables[table_index].length;
+ length = acpi_gbl_root_table_list.tables[acpi_gbl_fadt_index].length;
table =
- acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
- address, length);
+ acpi_os_map_memory(acpi_gbl_root_table_list.
+ tables[acpi_gbl_fadt_index].address, length);
if (!table) {
return;
}
}
#endif /* !ACPI_REDUCED_HARDWARE */
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_tables_loaded
- *
- * PARAMETERS: None
- *
- * RETURN: TRUE if required ACPI tables are loaded
- *
- * DESCRIPTION: Determine if the minimum required ACPI tables are present
- * (FADT, FACS, DSDT)
- *
- ******************************************************************************/
-
-u8 acpi_tb_tables_loaded(void)
-{
-
- if (acpi_gbl_root_table_list.current_table_count >= 4) {
- return (TRUE);
- }
-
- return (FALSE);
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_tb_check_dsdt_header
ACPI_COMPARE_NAME(&acpi_gbl_root_table_list.
tables[table_index].signature,
ACPI_SIG_FADT)) {
- acpi_tb_parse_fadt(table_index);
+ acpi_gbl_fadt_index = table_index;
+ acpi_tb_parse_fadt();
}
next_table:
* For readq() and writeq() on 32-bit builds, the hi-lo, lo-hi order is
* irrelevant.
*/
-#include <asm-generic/io-64-nonatomic-hi-lo.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
static bool force_enable_dimms;
module_param(force_enable_dimms, bool, S_IRUGO|S_IWUSR);
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include "internal.h"
* global one. Requires architecture specific dev_get_cma_area() helper
* function.
*/
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int align)
{
if (align > CONFIG_CMA_ALIGNMENT)
return -ENOMEM;
}
} else {
- if (IS_ERR(clk) || !__clk_get(clk)) {
+ if (IS_ERR(clk)) {
kfree(ce);
return -ENOENT;
}
* @clk: Clock pointer
*
* Add the clock to the list of clocks used for the power management of @dev.
- * It will increment refcount on clock pointer, use clk_put() on it when done.
+ * The power-management code will take control of the clock reference, so
+ * callers should not call clk_put() on @clk after this function sucessfully
+ * returned.
*/
int pm_clk_add_clk(struct device *dev, struct clk *clk)
{
dev_update_qos_constraint);
if (constraint_ns > 0) {
- constraint_ns -= td->start_latency_ns;
+ constraint_ns -= td->save_state_latency_ns +
+ td->stop_latency_ns +
+ td->start_latency_ns +
+ td->restore_state_latency_ns;
if (constraint_ns == 0)
return false;
}
td->effective_constraint_ns = constraint_ns;
- td->cached_stop_ok = constraint_ns > td->stop_latency_ns ||
- constraint_ns == 0;
+ td->cached_stop_ok = constraint_ns >= 0;
+
/*
* The children have been suspended already, so we don't need to take
* their stop latencies into account here.
off_on_time_ns = genpd->power_off_latency_ns +
genpd->power_on_latency_ns;
- /*
- * It doesn't make sense to remove power from the domain if saving
- * the state of all devices in it and the power off/power on operations
- * take too much time.
- *
- * All devices in this domain have been stopped already at this point.
- */
- list_for_each_entry(pdd, &genpd->dev_list, list_node) {
- if (pdd->dev->driver)
- off_on_time_ns +=
- to_gpd_data(pdd)->td.save_state_latency_ns;
- }
min_off_time_ns = -1;
/*
* constraint_ns cannot be negative here, because the device has
* been suspended.
*/
- constraint_ns -= td->restore_state_latency_ns;
if (constraint_ns <= off_on_time_ns)
return false;
#include <linux/string.h>
#include <linux/drbd.h>
#include <linux/slab.h>
-#include <asm/kmap_types.h>
+#include <linux/highmem.h>
#include "drbd_int.h"
bool disconnect; /* a disconnect has been requested by user */
struct timer_list timeout_timer;
+ spinlock_t tasks_lock;
struct task_struct *task_recv;
struct task_struct *task_send;
static void nbd_xmit_timeout(unsigned long arg)
{
struct nbd_device *nbd = (struct nbd_device *)arg;
- struct task_struct *task;
+ unsigned long flags;
if (list_empty(&nbd->queue_head))
return;
nbd->disconnect = true;
- task = READ_ONCE(nbd->task_recv);
- if (task)
- force_sig(SIGKILL, task);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
+
+ if (nbd->task_recv)
+ force_sig(SIGKILL, nbd->task_recv);
- task = READ_ONCE(nbd->task_send);
- if (task)
+ if (nbd->task_send)
force_sig(SIGKILL, nbd->task_send);
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
dev_err(nbd_to_dev(nbd), "Connection timed out, killed receiver and sender, shutting down connection\n");
}
{
struct request *req;
int ret;
+ unsigned long flags;
BUG_ON(nbd->magic != NBD_MAGIC);
sk_set_memalloc(nbd->sock->sk);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr);
if (ret) {
dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n");
+
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
return ret;
}
device_remove_file(disk_to_dev(nbd->disk), &pid_attr);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
if (signal_pending(current)) {
siginfo_t info;
{
struct nbd_device *nbd = data;
struct request *req;
+ unsigned long flags;
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
set_user_nice(current, MIN_NICE);
while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) {
nbd_handle_req(nbd, req);
}
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
+ /* Clear maybe pending signals */
+ if (signal_pending(current)) {
+ siginfo_t info;
+ dequeue_signal_lock(current, ¤t->blocked, &info);
+ }
return 0;
}
nbd_dev[i].magic = NBD_MAGIC;
INIT_LIST_HEAD(&nbd_dev[i].waiting_queue);
spin_lock_init(&nbd_dev[i].queue_lock);
+ spin_lock_init(&nbd_dev[i].tasks_lock);
INIT_LIST_HEAD(&nbd_dev[i].queue_head);
mutex_init(&nbd_dev[i].tx_lock);
init_timer(&nbd_dev[i].timeout_timer);
#include <linux/t10-pi.h>
#include <linux/types.h>
#include <scsi/sg.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#define NVME_MINORS (1U << MINORBITS)
#define NVME_Q_DEPTH 1024
struct nvme_iod *iod = ctx;
struct request *req = iod_get_private(iod);
struct nvme_cmd_info *cmd_rq = blk_mq_rq_to_pdu(req);
-
u16 status = le16_to_cpup(&cqe->status) >> 1;
+ bool requeue = false;
+ int error = 0;
if (unlikely(status)) {
if (!(status & NVME_SC_DNR || blk_noretry_request(req))
&& (jiffies - req->start_time) < req->timeout) {
unsigned long flags;
+ requeue = true;
blk_mq_requeue_request(req);
spin_lock_irqsave(req->q->queue_lock, flags);
if (!blk_queue_stopped(req->q))
blk_mq_kick_requeue_list(req->q);
spin_unlock_irqrestore(req->q->queue_lock, flags);
- return;
+ goto release_iod;
}
if (req->cmd_type == REQ_TYPE_DRV_PRIV) {
if (cmd_rq->ctx == CMD_CTX_CANCELLED)
- status = -EINTR;
+ error = -EINTR;
+ else
+ error = status;
} else {
- status = nvme_error_status(status);
+ error = nvme_error_status(status);
}
}
if (cmd_rq->aborted)
dev_warn(nvmeq->dev->dev,
"completing aborted command with status:%04x\n",
- status);
+ error);
+release_iod:
if (iod->nents) {
dma_unmap_sg(nvmeq->dev->dev, iod->sg, iod->nents,
rq_data_dir(req) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
}
nvme_free_iod(nvmeq->dev, iod);
- blk_mq_complete_request(req, status);
+ if (likely(!requeue))
+ blk_mq_complete_request(req, error);
}
/* length is in bytes. gfp flags indicates whether we may sleep. */
length = (io.nblocks + 1) << ns->lba_shift;
meta_len = (io.nblocks + 1) * ns->ms;
- metadata = (void __user *)(unsigned long)io.metadata;
+ metadata = (void __user *)(uintptr_t)io.metadata;
write = io.opcode & 1;
if (ns->ext) {
c.rw.metadata = cpu_to_le64(meta_dma);
status = __nvme_submit_sync_cmd(ns->queue, &c, NULL,
- (void __user *)io.addr, length, NULL, 0);
+ (void __user *)(uintptr_t)io.addr, length, NULL, 0);
unmap:
if (meta) {
if (status == NVME_SC_SUCCESS && !write) {
timeout = msecs_to_jiffies(cmd.timeout_ms);
status = __nvme_submit_sync_cmd(ns ? ns->queue : dev->admin_q, &c,
- NULL, (void __user *)cmd.addr, cmd.data_len,
+ NULL, (void __user *)(uintptr_t)cmd.addr, cmd.data_len,
&cmd.result, timeout);
if (status >= 0) {
if (put_user(cmd.result, &ucmd->result))
#define RBD_MINORS_PER_MAJOR 256
#define RBD_SINGLE_MAJOR_PART_SHIFT 4
+#define RBD_MAX_PARENT_CHAIN_LEN 16
+
#define RBD_SNAP_DEV_NAME_PREFIX "snap_"
#define RBD_MAX_SNAP_NAME_LEN \
(NAME_MAX - (sizeof (RBD_SNAP_DEV_NAME_PREFIX) - 1))
size_t count);
static ssize_t rbd_remove_single_major(struct bus_type *bus, const char *buf,
size_t count);
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping);
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth);
static void rbd_spec_put(struct rbd_spec *spec);
static int rbd_dev_id_to_minor(int dev_id)
rbd_osd_read_callback(obj_request);
break;
case CEPH_OSD_OP_SETALLOCHINT:
- rbd_assert(osd_req->r_ops[1].op == CEPH_OSD_OP_WRITE);
+ rbd_assert(osd_req->r_ops[1].op == CEPH_OSD_OP_WRITE ||
+ osd_req->r_ops[1].op == CEPH_OSD_OP_WRITEFULL);
/* fall through */
case CEPH_OSD_OP_WRITE:
+ case CEPH_OSD_OP_WRITEFULL:
rbd_osd_write_callback(obj_request);
break;
case CEPH_OSD_OP_STAT:
opcode = CEPH_OSD_OP_ZERO;
}
} else if (op_type == OBJ_OP_WRITE) {
- opcode = CEPH_OSD_OP_WRITE;
+ if (!offset && length == object_size)
+ opcode = CEPH_OSD_OP_WRITEFULL;
+ else
+ opcode = CEPH_OSD_OP_WRITE;
osd_req_op_alloc_hint_init(osd_request, num_ops,
object_size, object_size);
num_ops++;
/* set io sizes to object size */
segment_size = rbd_obj_bytes(&rbd_dev->header);
blk_queue_max_hw_sectors(q, segment_size / SECTOR_SIZE);
+ q->limits.max_sectors = queue_max_hw_sectors(q);
blk_queue_max_segments(q, segment_size / SECTOR_SIZE);
blk_queue_max_segment_size(q, segment_size);
blk_queue_io_min(q, segment_size);
blk_queue_max_discard_sectors(q, segment_size / SECTOR_SIZE);
q->limits.discard_zeroes_data = 1;
+ if (!ceph_test_opt(rbd_dev->rbd_client->client, NOCRC))
+ q->backing_dev_info.capabilities |= BDI_CAP_STABLE_WRITES;
+
disk->queue = q;
q->queuedata = rbd_dev;
return ret;
}
-static int rbd_dev_probe_parent(struct rbd_device *rbd_dev)
+/*
+ * @depth is rbd_dev_image_probe() -> rbd_dev_probe_parent() ->
+ * rbd_dev_image_probe() recursion depth, which means it's also the
+ * length of the already discovered part of the parent chain.
+ */
+static int rbd_dev_probe_parent(struct rbd_device *rbd_dev, int depth)
{
struct rbd_device *parent = NULL;
- struct rbd_spec *parent_spec;
- struct rbd_client *rbdc;
int ret;
if (!rbd_dev->parent_spec)
return 0;
- /*
- * We need to pass a reference to the client and the parent
- * spec when creating the parent rbd_dev. Images related by
- * parent/child relationships always share both.
- */
- parent_spec = rbd_spec_get(rbd_dev->parent_spec);
- rbdc = __rbd_get_client(rbd_dev->rbd_client);
- ret = -ENOMEM;
- parent = rbd_dev_create(rbdc, parent_spec, NULL);
- if (!parent)
+ if (++depth > RBD_MAX_PARENT_CHAIN_LEN) {
+ pr_info("parent chain is too long (%d)\n", depth);
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+ parent = rbd_dev_create(rbd_dev->rbd_client, rbd_dev->parent_spec,
+ NULL);
+ if (!parent) {
+ ret = -ENOMEM;
goto out_err;
+ }
- ret = rbd_dev_image_probe(parent, false);
+ /*
+ * Images related by parent/child relationships always share
+ * rbd_client and spec/parent_spec, so bump their refcounts.
+ */
+ __rbd_get_client(rbd_dev->rbd_client);
+ rbd_spec_get(rbd_dev->parent_spec);
+
+ ret = rbd_dev_image_probe(parent, depth);
if (ret < 0)
goto out_err;
+
rbd_dev->parent = parent;
atomic_set(&rbd_dev->parent_ref, 1);
-
return 0;
+
out_err:
- if (parent) {
- rbd_dev_unparent(rbd_dev);
+ rbd_dev_unparent(rbd_dev);
+ if (parent)
rbd_dev_destroy(parent);
- } else {
- rbd_put_client(rbdc);
- rbd_spec_put(parent_spec);
- }
-
return ret;
}
* parent), initiate a watch on its header object before using that
* object to get detailed information about the rbd image.
*/
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping)
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
{
int ret;
if (ret)
goto err_out_format;
- if (mapping) {
+ if (!depth) {
ret = rbd_dev_header_watch_sync(rbd_dev);
if (ret) {
if (ret == -ENOENT)
* Otherwise this is a parent image, identified by pool, image
* and snap ids - need to fill in names for those ids.
*/
- if (mapping)
+ if (!depth)
ret = rbd_spec_fill_snap_id(rbd_dev);
else
ret = rbd_spec_fill_names(rbd_dev);
* Need to warn users if this image is the one being
* mapped and has a parent.
*/
- if (mapping && rbd_dev->parent_spec)
+ if (!depth && rbd_dev->parent_spec)
rbd_warn(rbd_dev,
"WARNING: kernel layering is EXPERIMENTAL!");
}
- ret = rbd_dev_probe_parent(rbd_dev);
+ ret = rbd_dev_probe_parent(rbd_dev, depth);
if (ret)
goto err_out_probe;
err_out_probe:
rbd_dev_unprobe(rbd_dev);
err_out_watch:
- if (mapping)
+ if (!depth)
rbd_dev_header_unwatch_sync(rbd_dev);
out_header_name:
kfree(rbd_dev->header_name);
spec = NULL; /* rbd_dev now owns this */
rbd_opts = NULL; /* rbd_dev now owns this */
- rc = rbd_dev_image_probe(rbd_dev, true);
+ rc = rbd_dev_image_probe(rbd_dev, 0);
if (rc < 0)
goto err_out_rbd_dev;
break;
/* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
- blkfront_closing(info);
+ if (info)
+ blkfront_closing(info);
break;
}
}
config ARM_CCI500_PMU
bool "ARM CCI500 PMU support"
- default y
depends on (ARM && CPU_V7) || ARM64
depends on PERF_EVENTS
select ARM_CCI_PMU
Controller (BSC, sometimes called "LBSC within Bus Bridge", or
"External Bus Interface") as found on several Renesas ARM SoCs.
+config SUNXI_RSB
+ tristate "Allwinner sunXi Reduced Serial Bus Driver"
+ default MACH_SUN8I || MACH_SUN9I
+ depends on ARCH_SUNXI
+ select REGMAP
+ help
+ Say y here to enable support for Allwinner's Reduced Serial Bus
+ (RSB) support. This controller is responsible for communicating
+ with various RSB based devices, such as AXP223, AXP8XX PMICs,
+ and AC100/AC200 ICs.
+
config VEXPRESS_CONFIG
bool "Versatile Express configuration bus"
default y if ARCH_VEXPRESS
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
+obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
- if (target < 0)
+ if (target >= nr_cpu_ids)
break;
perf_pmu_migrate_context(&dt->pmu, cpu, target);
cpumask_set_cpu(target, &dt->cpu);
- WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ if (ccn->irq)
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
default:
break;
}
--- /dev/null
+/*
+ * RSB (Reduced Serial Bus) driver.
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * The RSB controller looks like an SMBus controller which only supports
+ * byte and word data transfers. But, it differs from standard SMBus
+ * protocol on several aspects:
+ * - it uses addresses set at runtime to address slaves. Runtime addresses
+ * are sent to slaves using their 12bit hardware addresses. Up to 15
+ * runtime addresses are available.
+ * - it adds a parity bit every 8bits of data and address for read and
+ * write accesses; this replaces the ack bit
+ * - only one read access is required to read a byte (instead of a write
+ * followed by a read access in standard SMBus protocol)
+ * - there's no Ack bit after each read access
+ *
+ * This means this bus cannot be used to interface with standard SMBus
+ * devices. Devices known to support this interface include the AXP223,
+ * AXP809, and AXP806 PMICs, and the AC100 audio codec, all from X-Powers.
+ *
+ * A description of the operation and wire protocol can be found in the
+ * RSB section of Allwinner's A80 user manual, which can be found at
+ *
+ * https://github.com/allwinner-zh/documents/tree/master/A80
+ *
+ * This document is officially released by Allwinner.
+ *
+ * This driver is based on i2c-sun6i-p2wi.c, the P2WI bus driver.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/sunxi-rsb.h>
+#include <linux/types.h>
+
+/* RSB registers */
+#define RSB_CTRL 0x0 /* Global control */
+#define RSB_CCR 0x4 /* Clock control */
+#define RSB_INTE 0x8 /* Interrupt controls */
+#define RSB_INTS 0xc /* Interrupt status */
+#define RSB_ADDR 0x10 /* Address to send with read/write command */
+#define RSB_DATA 0x1c /* Data to read/write */
+#define RSB_LCR 0x24 /* Line control */
+#define RSB_DMCR 0x28 /* Device mode (init) control */
+#define RSB_CMD 0x2c /* RSB Command */
+#define RSB_DAR 0x30 /* Device address / runtime address */
+
+/* CTRL fields */
+#define RSB_CTRL_START_TRANS BIT(7)
+#define RSB_CTRL_ABORT_TRANS BIT(6)
+#define RSB_CTRL_GLOBAL_INT_ENB BIT(1)
+#define RSB_CTRL_SOFT_RST BIT(0)
+
+/* CLK CTRL fields */
+#define RSB_CCR_SDA_OUT_DELAY(v) (((v) & 0x7) << 8)
+#define RSB_CCR_MAX_CLK_DIV 0xff
+#define RSB_CCR_CLK_DIV(v) ((v) & RSB_CCR_MAX_CLK_DIV)
+
+/* STATUS fields */
+#define RSB_INTS_TRANS_ERR_ACK BIT(16)
+#define RSB_INTS_TRANS_ERR_DATA_BIT(v) (((v) >> 8) & 0xf)
+#define RSB_INTS_TRANS_ERR_DATA GENMASK(11, 8)
+#define RSB_INTS_LOAD_BSY BIT(2)
+#define RSB_INTS_TRANS_ERR BIT(1)
+#define RSB_INTS_TRANS_OVER BIT(0)
+
+/* LINE CTRL fields*/
+#define RSB_LCR_SCL_STATE BIT(5)
+#define RSB_LCR_SDA_STATE BIT(4)
+#define RSB_LCR_SCL_CTL BIT(3)
+#define RSB_LCR_SCL_CTL_EN BIT(2)
+#define RSB_LCR_SDA_CTL BIT(1)
+#define RSB_LCR_SDA_CTL_EN BIT(0)
+
+/* DEVICE MODE CTRL field values */
+#define RSB_DMCR_DEVICE_START BIT(31)
+#define RSB_DMCR_MODE_DATA (0x7c << 16)
+#define RSB_DMCR_MODE_REG (0x3e << 8)
+#define RSB_DMCR_DEV_ADDR 0x00
+
+/* CMD values */
+#define RSB_CMD_RD8 0x8b
+#define RSB_CMD_RD16 0x9c
+#define RSB_CMD_RD32 0xa6
+#define RSB_CMD_WR8 0x4e
+#define RSB_CMD_WR16 0x59
+#define RSB_CMD_WR32 0x63
+#define RSB_CMD_STRA 0xe8
+
+/* DAR fields */
+#define RSB_DAR_RTA(v) (((v) & 0xff) << 16)
+#define RSB_DAR_DA(v) ((v) & 0xffff)
+
+#define RSB_MAX_FREQ 20000000
+
+#define RSB_CTRL_NAME "sunxi-rsb"
+
+struct sunxi_rsb_addr_map {
+ u16 hwaddr;
+ u8 rtaddr;
+};
+
+struct sunxi_rsb {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+ struct reset_control *rstc;
+ struct completion complete;
+ struct mutex lock;
+ unsigned int status;
+};
+
+/* bus / slave device related functions */
+static struct bus_type sunxi_rsb_bus;
+
+static int sunxi_rsb_device_match(struct device *dev, struct device_driver *drv)
+{
+ return of_driver_match_device(dev, drv);
+}
+
+static int sunxi_rsb_device_probe(struct device *dev)
+{
+ const struct sunxi_rsb_driver *drv = to_sunxi_rsb_driver(dev->driver);
+ struct sunxi_rsb_device *rdev = to_sunxi_rsb_device(dev);
+ int ret;
+
+ if (!drv->probe)
+ return -ENODEV;
+
+ if (!rdev->irq) {
+ int irq = -ENOENT;
+
+ if (dev->of_node)
+ irq = of_irq_get(dev->of_node, 0);
+
+ if (irq == -EPROBE_DEFER)
+ return irq;
+ if (irq < 0)
+ irq = 0;
+
+ rdev->irq = irq;
+ }
+
+ ret = of_clk_set_defaults(dev->of_node, false);
+ if (ret < 0)
+ return ret;
+
+ return drv->probe(rdev);
+}
+
+static int sunxi_rsb_device_remove(struct device *dev)
+{
+ const struct sunxi_rsb_driver *drv = to_sunxi_rsb_driver(dev->driver);
+
+ return drv->remove(to_sunxi_rsb_device(dev));
+}
+
+static struct bus_type sunxi_rsb_bus = {
+ .name = RSB_CTRL_NAME,
+ .match = sunxi_rsb_device_match,
+ .probe = sunxi_rsb_device_probe,
+ .remove = sunxi_rsb_device_remove,
+};
+
+static void sunxi_rsb_dev_release(struct device *dev)
+{
+ struct sunxi_rsb_device *rdev = to_sunxi_rsb_device(dev);
+
+ kfree(rdev);
+}
+
+/**
+ * sunxi_rsb_device_create() - allocate and add an RSB device
+ * @rsb: RSB controller
+ * @node: RSB slave device node
+ * @hwaddr: RSB slave hardware address
+ * @rtaddr: RSB slave runtime address
+ */
+static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
+ struct device_node *node, u16 hwaddr, u8 rtaddr)
+{
+ int err;
+ struct sunxi_rsb_device *rdev;
+
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev)
+ return ERR_PTR(-ENOMEM);
+
+ rdev->rsb = rsb;
+ rdev->hwaddr = hwaddr;
+ rdev->rtaddr = rtaddr;
+ rdev->dev.bus = &sunxi_rsb_bus;
+ rdev->dev.parent = rsb->dev;
+ rdev->dev.of_node = node;
+ rdev->dev.release = sunxi_rsb_dev_release;
+
+ dev_set_name(&rdev->dev, "%s-%x", RSB_CTRL_NAME, hwaddr);
+
+ err = device_register(&rdev->dev);
+ if (err < 0) {
+ dev_err(&rdev->dev, "Can't add %s, status %d\n",
+ dev_name(&rdev->dev), err);
+ goto err_device_add;
+ }
+
+ dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
+
+err_device_add:
+ put_device(&rdev->dev);
+
+ return ERR_PTR(err);
+}
+
+/**
+ * sunxi_rsb_device_unregister(): unregister an RSB device
+ * @rdev: rsb_device to be removed
+ */
+static void sunxi_rsb_device_unregister(struct sunxi_rsb_device *rdev)
+{
+ device_unregister(&rdev->dev);
+}
+
+static int sunxi_rsb_remove_devices(struct device *dev, void *data)
+{
+ struct sunxi_rsb_device *rdev = to_sunxi_rsb_device(dev);
+
+ if (dev->bus == &sunxi_rsb_bus)
+ sunxi_rsb_device_unregister(rdev);
+
+ return 0;
+}
+
+/**
+ * sunxi_rsb_driver_register() - Register device driver with RSB core
+ * @rdrv: device driver to be associated with slave-device.
+ *
+ * This API will register the client driver with the RSB framework.
+ * It is typically called from the driver's module-init function.
+ */
+int sunxi_rsb_driver_register(struct sunxi_rsb_driver *rdrv)
+{
+ rdrv->driver.bus = &sunxi_rsb_bus;
+ return driver_register(&rdrv->driver);
+}
+EXPORT_SYMBOL_GPL(sunxi_rsb_driver_register);
+
+/* common code that starts a transfer */
+static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb)
+{
+ if (readl(rsb->regs + RSB_CTRL) & RSB_CTRL_START_TRANS) {
+ dev_dbg(rsb->dev, "RSB transfer still in progress\n");
+ return -EBUSY;
+ }
+
+ reinit_completion(&rsb->complete);
+
+ writel(RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR | RSB_INTS_TRANS_OVER,
+ rsb->regs + RSB_INTE);
+ writel(RSB_CTRL_START_TRANS | RSB_CTRL_GLOBAL_INT_ENB,
+ rsb->regs + RSB_CTRL);
+
+ if (!wait_for_completion_io_timeout(&rsb->complete,
+ msecs_to_jiffies(100))) {
+ dev_dbg(rsb->dev, "RSB timeout\n");
+
+ /* abort the transfer */
+ writel(RSB_CTRL_ABORT_TRANS, rsb->regs + RSB_CTRL);
+
+ /* clear any interrupt flags */
+ writel(readl(rsb->regs + RSB_INTS), rsb->regs + RSB_INTS);
+
+ return -ETIMEDOUT;
+ }
+
+ if (rsb->status & RSB_INTS_LOAD_BSY) {
+ dev_dbg(rsb->dev, "RSB busy\n");
+ return -EBUSY;
+ }
+
+ if (rsb->status & RSB_INTS_TRANS_ERR) {
+ if (rsb->status & RSB_INTS_TRANS_ERR_ACK) {
+ dev_dbg(rsb->dev, "RSB slave nack\n");
+ return -EINVAL;
+ }
+
+ if (rsb->status & RSB_INTS_TRANS_ERR_DATA) {
+ dev_dbg(rsb->dev, "RSB transfer data error\n");
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
+ u32 *buf, size_t len)
+{
+ u32 cmd;
+ int ret;
+
+ if (!buf)
+ return -EINVAL;
+
+ switch (len) {
+ case 1:
+ cmd = RSB_CMD_RD8;
+ break;
+ case 2:
+ cmd = RSB_CMD_RD16;
+ break;
+ case 4:
+ cmd = RSB_CMD_RD32;
+ break;
+ default:
+ dev_err(rsb->dev, "Invalid access width: %d\n", len);
+ return -EINVAL;
+ }
+
+ mutex_lock(&rsb->lock);
+
+ writel(addr, rsb->regs + RSB_ADDR);
+ writel(RSB_DAR_RTA(rtaddr), rsb->regs + RSB_DAR);
+ writel(cmd, rsb->regs + RSB_CMD);
+
+ ret = _sunxi_rsb_run_xfer(rsb);
+ if (ret)
+ goto out;
+
+ *buf = readl(rsb->regs + RSB_DATA);
+
+ mutex_unlock(&rsb->lock);
+
+out:
+ return ret;
+}
+
+static int sunxi_rsb_write(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
+ const u32 *buf, size_t len)
+{
+ u32 cmd;
+ int ret;
+
+ if (!buf)
+ return -EINVAL;
+
+ switch (len) {
+ case 1:
+ cmd = RSB_CMD_WR8;
+ break;
+ case 2:
+ cmd = RSB_CMD_WR16;
+ break;
+ case 4:
+ cmd = RSB_CMD_WR32;
+ break;
+ default:
+ dev_err(rsb->dev, "Invalid access width: %d\n", len);
+ return -EINVAL;
+ }
+
+ mutex_lock(&rsb->lock);
+
+ writel(addr, rsb->regs + RSB_ADDR);
+ writel(RSB_DAR_RTA(rtaddr), rsb->regs + RSB_DAR);
+ writel(*buf, rsb->regs + RSB_DATA);
+ writel(cmd, rsb->regs + RSB_CMD);
+ ret = _sunxi_rsb_run_xfer(rsb);
+
+ mutex_unlock(&rsb->lock);
+
+ return ret;
+}
+
+/* RSB regmap functions */
+struct sunxi_rsb_ctx {
+ struct sunxi_rsb_device *rdev;
+ int size;
+};
+
+static int regmap_sunxi_rsb_reg_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct sunxi_rsb_ctx *ctx = context;
+ struct sunxi_rsb_device *rdev = ctx->rdev;
+
+ if (reg > 0xff)
+ return -EINVAL;
+
+ return sunxi_rsb_read(rdev->rsb, rdev->rtaddr, reg, val, ctx->size);
+}
+
+static int regmap_sunxi_rsb_reg_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct sunxi_rsb_ctx *ctx = context;
+ struct sunxi_rsb_device *rdev = ctx->rdev;
+
+ return sunxi_rsb_write(rdev->rsb, rdev->rtaddr, reg, &val, ctx->size);
+}
+
+static void regmap_sunxi_rsb_free_ctx(void *context)
+{
+ struct sunxi_rsb_ctx *ctx = context;
+
+ kfree(ctx);
+}
+
+static struct regmap_bus regmap_sunxi_rsb = {
+ .reg_write = regmap_sunxi_rsb_reg_write,
+ .reg_read = regmap_sunxi_rsb_reg_read,
+ .free_context = regmap_sunxi_rsb_free_ctx,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static struct sunxi_rsb_ctx *regmap_sunxi_rsb_init_ctx(struct sunxi_rsb_device *rdev,
+ const struct regmap_config *config)
+{
+ struct sunxi_rsb_ctx *ctx;
+
+ switch (config->val_bits) {
+ case 8:
+ case 16:
+ case 32:
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return ERR_PTR(-ENOMEM);
+
+ ctx->rdev = rdev;
+ ctx->size = config->val_bits / 8;
+
+ return ctx;
+}
+
+struct regmap *__devm_regmap_init_sunxi_rsb(struct sunxi_rsb_device *rdev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct sunxi_rsb_ctx *ctx = regmap_sunxi_rsb_init_ctx(rdev, config);
+
+ if (IS_ERR(ctx))
+ return ERR_CAST(ctx);
+
+ return __devm_regmap_init(&rdev->dev, ®map_sunxi_rsb, ctx, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_sunxi_rsb);
+
+/* RSB controller driver functions */
+static irqreturn_t sunxi_rsb_irq(int irq, void *dev_id)
+{
+ struct sunxi_rsb *rsb = dev_id;
+ u32 status;
+
+ status = readl(rsb->regs + RSB_INTS);
+ rsb->status = status;
+
+ /* Clear interrupts */
+ status &= (RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR |
+ RSB_INTS_TRANS_OVER);
+ writel(status, rsb->regs + RSB_INTS);
+
+ complete(&rsb->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int sunxi_rsb_init_device_mode(struct sunxi_rsb *rsb)
+{
+ int ret = 0;
+ u32 reg;
+
+ /* send init sequence */
+ writel(RSB_DMCR_DEVICE_START | RSB_DMCR_MODE_DATA |
+ RSB_DMCR_MODE_REG | RSB_DMCR_DEV_ADDR, rsb->regs + RSB_DMCR);
+
+ readl_poll_timeout(rsb->regs + RSB_DMCR, reg,
+ !(reg & RSB_DMCR_DEVICE_START), 100, 250000);
+ if (reg & RSB_DMCR_DEVICE_START)
+ ret = -ETIMEDOUT;
+
+ /* clear interrupt status bits */
+ writel(readl(rsb->regs + RSB_INTS), rsb->regs + RSB_INTS);
+
+ return ret;
+}
+
+/*
+ * There are 15 valid runtime addresses, though Allwinner typically
+ * skips the first, for unknown reasons, and uses the following three.
+ *
+ * 0x17, 0x2d, 0x3a, 0x4e, 0x59, 0x63, 0x74, 0x8b,
+ * 0x9c, 0xa6, 0xb1, 0xc5, 0xd2, 0xe8, 0xff
+ *
+ * No designs with 2 RSB slave devices sharing identical hardware
+ * addresses on the same bus have been seen in the wild. All designs
+ * use 0x2d for the primary PMIC, 0x3a for the secondary PMIC if
+ * there is one, and 0x45 for peripheral ICs.
+ *
+ * The hardware does not seem to support re-setting runtime addresses.
+ * Attempts to do so result in the slave devices returning a NACK.
+ * Hence we just hardcode the mapping here, like Allwinner does.
+ */
+
+static const struct sunxi_rsb_addr_map sunxi_rsb_addr_maps[] = {
+ { 0x3e3, 0x2d }, /* Primary PMIC: AXP223, AXP809, AXP81X, ... */
+ { 0x745, 0x3a }, /* Secondary PMIC: AXP806, ... */
+ { 0xe89, 0x45 }, /* Peripheral IC: AC100, ... */
+};
+
+static u8 sunxi_rsb_get_rtaddr(u16 hwaddr)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sunxi_rsb_addr_maps); i++)
+ if (hwaddr == sunxi_rsb_addr_maps[i].hwaddr)
+ return sunxi_rsb_addr_maps[i].rtaddr;
+
+ return 0; /* 0 is an invalid runtime address */
+}
+
+static int of_rsb_register_devices(struct sunxi_rsb *rsb)
+{
+ struct device *dev = rsb->dev;
+ struct device_node *child, *np = dev->of_node;
+ u32 hwaddr;
+ u8 rtaddr;
+ int ret;
+
+ if (!np)
+ return -EINVAL;
+
+ /* Runtime addresses for all slaves should be set first */
+ for_each_available_child_of_node(np, child) {
+ dev_dbg(dev, "setting child %s runtime address\n",
+ child->full_name);
+
+ ret = of_property_read_u32(child, "reg", &hwaddr);
+ if (ret) {
+ dev_err(dev, "%s: invalid 'reg' property: %d\n",
+ child->full_name, ret);
+ continue;
+ }
+
+ rtaddr = sunxi_rsb_get_rtaddr(hwaddr);
+ if (!rtaddr) {
+ dev_err(dev, "%s: unknown hardware device address\n",
+ child->full_name);
+ continue;
+ }
+
+ /*
+ * Since no devices have been registered yet, we are the
+ * only ones using the bus, we can skip locking the bus.
+ */
+
+ /* setup command parameters */
+ writel(RSB_CMD_STRA, rsb->regs + RSB_CMD);
+ writel(RSB_DAR_RTA(rtaddr) | RSB_DAR_DA(hwaddr),
+ rsb->regs + RSB_DAR);
+
+ /* send command */
+ ret = _sunxi_rsb_run_xfer(rsb);
+ if (ret)
+ dev_warn(dev, "%s: set runtime address failed: %d\n",
+ child->full_name, ret);
+ }
+
+ /* Then we start adding devices and probing them */
+ for_each_available_child_of_node(np, child) {
+ struct sunxi_rsb_device *rdev;
+
+ dev_dbg(dev, "adding child %s\n", child->full_name);
+
+ ret = of_property_read_u32(child, "reg", &hwaddr);
+ if (ret)
+ continue;
+
+ rtaddr = sunxi_rsb_get_rtaddr(hwaddr);
+ if (!rtaddr)
+ continue;
+
+ rdev = sunxi_rsb_device_create(rsb, child, hwaddr, rtaddr);
+ if (IS_ERR(rdev))
+ dev_err(dev, "failed to add child device %s: %ld\n",
+ child->full_name, PTR_ERR(rdev));
+ }
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_rsb_of_match_table[] = {
+ { .compatible = "allwinner,sun8i-a23-rsb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
+
+static int sunxi_rsb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *r;
+ struct sunxi_rsb *rsb;
+ unsigned long p_clk_freq;
+ u32 clk_delay, clk_freq = 3000000;
+ int clk_div, irq, ret;
+ u32 reg;
+
+ of_property_read_u32(np, "clock-frequency", &clk_freq);
+ if (clk_freq > RSB_MAX_FREQ) {
+ dev_err(dev,
+ "clock-frequency (%u Hz) is too high (max = 20MHz)\n",
+ clk_freq);
+ return -EINVAL;
+ }
+
+ rsb = devm_kzalloc(dev, sizeof(*rsb), GFP_KERNEL);
+ if (!rsb)
+ return -ENOMEM;
+
+ rsb->dev = dev;
+ platform_set_drvdata(pdev, rsb);
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rsb->regs = devm_ioremap_resource(dev, r);
+ if (IS_ERR(rsb->regs))
+ return PTR_ERR(rsb->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to retrieve irq: %d\n", irq);
+ return irq;
+ }
+
+ rsb->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(rsb->clk)) {
+ ret = PTR_ERR(rsb->clk);
+ dev_err(dev, "failed to retrieve clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(rsb->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clk: %d\n", ret);
+ return ret;
+ }
+
+ p_clk_freq = clk_get_rate(rsb->clk);
+
+ rsb->rstc = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(rsb->rstc)) {
+ ret = PTR_ERR(rsb->rstc);
+ dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
+ goto err_clk_disable;
+ }
+
+ ret = reset_control_deassert(rsb->rstc);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset line: %d\n", ret);
+ goto err_clk_disable;
+ }
+
+ init_completion(&rsb->complete);
+ mutex_init(&rsb->lock);
+
+ /* reset the controller */
+ writel(RSB_CTRL_SOFT_RST, rsb->regs + RSB_CTRL);
+ readl_poll_timeout(rsb->regs + RSB_CTRL, reg,
+ !(reg & RSB_CTRL_SOFT_RST), 1000, 100000);
+
+ /*
+ * Clock frequency and delay calculation code is from
+ * Allwinner U-boot sources.
+ *
+ * From A83 user manual:
+ * bus clock frequency = parent clock frequency / (2 * (divider + 1))
+ */
+ clk_div = p_clk_freq / clk_freq / 2;
+ if (!clk_div)
+ clk_div = 1;
+ else if (clk_div > RSB_CCR_MAX_CLK_DIV + 1)
+ clk_div = RSB_CCR_MAX_CLK_DIV + 1;
+
+ clk_delay = clk_div >> 1;
+ if (!clk_delay)
+ clk_delay = 1;
+
+ dev_info(dev, "RSB running at %lu Hz\n", p_clk_freq / clk_div / 2);
+ writel(RSB_CCR_SDA_OUT_DELAY(clk_delay) | RSB_CCR_CLK_DIV(clk_div - 1),
+ rsb->regs + RSB_CCR);
+
+ ret = devm_request_irq(dev, irq, sunxi_rsb_irq, 0, RSB_CTRL_NAME, rsb);
+ if (ret) {
+ dev_err(dev, "can't register interrupt handler irq %d: %d\n",
+ irq, ret);
+ goto err_reset_assert;
+ }
+
+ /* initialize all devices on the bus into RSB mode */
+ ret = sunxi_rsb_init_device_mode(rsb);
+ if (ret)
+ dev_warn(dev, "Initialize device mode failed: %d\n", ret);
+
+ of_rsb_register_devices(rsb);
+
+ return 0;
+
+err_reset_assert:
+ reset_control_assert(rsb->rstc);
+
+err_clk_disable:
+ clk_disable_unprepare(rsb->clk);
+
+ return ret;
+}
+
+static int sunxi_rsb_remove(struct platform_device *pdev)
+{
+ struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
+
+ device_for_each_child(rsb->dev, NULL, sunxi_rsb_remove_devices);
+ reset_control_assert(rsb->rstc);
+ clk_disable_unprepare(rsb->clk);
+
+ return 0;
+}
+
+static struct platform_driver sunxi_rsb_driver = {
+ .probe = sunxi_rsb_probe,
+ .remove = sunxi_rsb_remove,
+ .driver = {
+ .name = RSB_CTRL_NAME,
+ .of_match_table = sunxi_rsb_of_match_table,
+ },
+};
+
+static int __init sunxi_rsb_init(void)
+{
+ int ret;
+
+ ret = bus_register(&sunxi_rsb_bus);
+ if (ret) {
+ pr_err("failed to register sunxi sunxi_rsb bus: %d\n", ret);
+ return ret;
+ }
+
+ return platform_driver_register(&sunxi_rsb_driver);
+}
+module_init(sunxi_rsb_init);
+
+static void __exit sunxi_rsb_exit(void)
+{
+ platform_driver_unregister(&sunxi_rsb_driver);
+ bus_unregister(&sunxi_rsb_bus);
+}
+module_exit(sunxi_rsb_exit);
+
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_DESCRIPTION("Allwinner sunXi Reduced Serial Bus controller driver");
+MODULE_LICENSE("GPL v2");
}
#endif /* CONFIG_PM */
+static struct {
+ struct page **pages_arr;
+} uninorth_priv;
+
static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
{
char *table;
int i;
void *temp;
struct page *page;
- struct page **pages;
/* We can't handle 2 level gatt's */
if (bridge->driver->size_type == LVL2_APER_SIZE)
if (table == NULL)
return -ENOMEM;
- pages = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL);
- if (pages == NULL)
+ uninorth_priv.pages_arr = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL);
+ if (uninorth_priv.pages_arr == NULL)
goto enomem;
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
for (page = virt_to_page(table), i = 0; page <= virt_to_page(table_end);
page++, i++) {
SetPageReserved(page);
- pages[i] = page;
+ uninorth_priv.pages_arr[i] = page;
}
bridge->gatt_table_real = (u32 *) table;
/* Need to clear out any dirty data still sitting in caches */
flush_dcache_range((unsigned long)table,
(unsigned long)table_end + 1);
- bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG);
+ bridge->gatt_table = vmap(uninorth_priv.pages_arr, (1 << page_order), 0, PAGE_KERNEL_NCG);
if (bridge->gatt_table == NULL)
goto enomem;
return 0;
enomem:
- kfree(pages);
+ kfree(uninorth_priv.pages_arr);
if (table)
free_pages((unsigned long)table, page_order);
return -ENOMEM;
*/
vunmap(bridge->gatt_table);
+ kfree(uninorth_priv.pages_arr);
table = (char *) bridge->gatt_table_real;
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
+config COMMON_CLK_SCPI
+ tristate "Clock driver controlled via SCPI interface"
+ depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
+ ---help---
+ This driver provides support for clocks that are controlled
+ by firmware that implements the SCPI interface.
+
+ This driver uses SCPI Message Protocol to interact with the
+ firmware providing all the clock controls.
+
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
- depends on (PPC_E500MC || ARM) && OF
+ depends on (PPC_E500MC || ARM || ARM64) && OF
---help---
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
+obj-$(CONFIG_COMMON_CLK) += clk-multiplier.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
obj-$(CONFIG_COMMON_CLK) += clk-composite.o
obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
-obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
+obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
--- /dev/null
+/*
+ * Copyright (C) 2010,2015 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels. There's a root
+ * oscillator running at 19.2Mhz. After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays". Those 5 PLLs each can divide their output to
+ * produce up to 4 channels. Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD 0x5a000000
+
+#define CM_GNRICCTL 0x000
+#define CM_GNRICDIV 0x004
+# define CM_DIV_FRAC_BITS 12
+
+#define CM_VPUCTL 0x008
+#define CM_VPUDIV 0x00c
+#define CM_SYSCTL 0x010
+#define CM_SYSDIV 0x014
+#define CM_PERIACTL 0x018
+#define CM_PERIADIV 0x01c
+#define CM_PERIICTL 0x020
+#define CM_PERIIDIV 0x024
+#define CM_H264CTL 0x028
+#define CM_H264DIV 0x02c
+#define CM_ISPCTL 0x030
+#define CM_ISPDIV 0x034
+#define CM_V3DCTL 0x038
+#define CM_V3DDIV 0x03c
+#define CM_CAM0CTL 0x040
+#define CM_CAM0DIV 0x044
+#define CM_CAM1CTL 0x048
+#define CM_CAM1DIV 0x04c
+#define CM_CCP2CTL 0x050
+#define CM_CCP2DIV 0x054
+#define CM_DSI0ECTL 0x058
+#define CM_DSI0EDIV 0x05c
+#define CM_DSI0PCTL 0x060
+#define CM_DSI0PDIV 0x064
+#define CM_DPICTL 0x068
+#define CM_DPIDIV 0x06c
+#define CM_GP0CTL 0x070
+#define CM_GP0DIV 0x074
+#define CM_GP1CTL 0x078
+#define CM_GP1DIV 0x07c
+#define CM_GP2CTL 0x080
+#define CM_GP2DIV 0x084
+#define CM_HSMCTL 0x088
+#define CM_HSMDIV 0x08c
+#define CM_OTPCTL 0x090
+#define CM_OTPDIV 0x094
+#define CM_PWMCTL 0x0a0
+#define CM_PWMDIV 0x0a4
+#define CM_SMICTL 0x0b0
+#define CM_SMIDIV 0x0b4
+#define CM_TSENSCTL 0x0e0
+#define CM_TSENSDIV 0x0e4
+#define CM_TIMERCTL 0x0e8
+#define CM_TIMERDIV 0x0ec
+#define CM_UARTCTL 0x0f0
+#define CM_UARTDIV 0x0f4
+#define CM_VECCTL 0x0f8
+#define CM_VECDIV 0x0fc
+#define CM_PULSECTL 0x190
+#define CM_PULSEDIV 0x194
+#define CM_SDCCTL 0x1a8
+#define CM_SDCDIV 0x1ac
+#define CM_ARMCTL 0x1b0
+#define CM_EMMCCTL 0x1c0
+#define CM_EMMCDIV 0x1c4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE BIT(4)
+# define CM_KILL BIT(5)
+# define CM_GATE_BIT 6
+# define CM_GATE BIT(CM_GATE_BIT)
+# define CM_BUSY BIT(7)
+# define CM_BUSYD BIT(8)
+# define CM_SRC_SHIFT 0
+# define CM_SRC_BITS 4
+# define CM_SRC_MASK 0xf
+# define CM_SRC_GND 0
+# define CM_SRC_OSC 1
+# define CM_SRC_TESTDEBUG0 2
+# define CM_SRC_TESTDEBUG1 3
+# define CM_SRC_PLLA_CORE 4
+# define CM_SRC_PLLA_PER 4
+# define CM_SRC_PLLC_CORE0 5
+# define CM_SRC_PLLC_PER 5
+# define CM_SRC_PLLC_CORE1 8
+# define CM_SRC_PLLD_CORE 6
+# define CM_SRC_PLLD_PER 6
+# define CM_SRC_PLLH_AUX 7
+# define CM_SRC_PLLC_CORE1 8
+# define CM_SRC_PLLC_CORE2 9
+
+#define CM_OSCCOUNT 0x100
+
+#define CM_PLLA 0x104
+# define CM_PLL_ANARST BIT(8)
+# define CM_PLLA_HOLDPER BIT(7)
+# define CM_PLLA_LOADPER BIT(6)
+# define CM_PLLA_HOLDCORE BIT(5)
+# define CM_PLLA_LOADCORE BIT(4)
+# define CM_PLLA_HOLDCCP2 BIT(3)
+# define CM_PLLA_LOADCCP2 BIT(2)
+# define CM_PLLA_HOLDDSI0 BIT(1)
+# define CM_PLLA_LOADDSI0 BIT(0)
+
+#define CM_PLLC 0x108
+# define CM_PLLC_HOLDPER BIT(7)
+# define CM_PLLC_LOADPER BIT(6)
+# define CM_PLLC_HOLDCORE2 BIT(5)
+# define CM_PLLC_LOADCORE2 BIT(4)
+# define CM_PLLC_HOLDCORE1 BIT(3)
+# define CM_PLLC_LOADCORE1 BIT(2)
+# define CM_PLLC_HOLDCORE0 BIT(1)
+# define CM_PLLC_LOADCORE0 BIT(0)
+
+#define CM_PLLD 0x10c
+# define CM_PLLD_HOLDPER BIT(7)
+# define CM_PLLD_LOADPER BIT(6)
+# define CM_PLLD_HOLDCORE BIT(5)
+# define CM_PLLD_LOADCORE BIT(4)
+# define CM_PLLD_HOLDDSI1 BIT(3)
+# define CM_PLLD_LOADDSI1 BIT(2)
+# define CM_PLLD_HOLDDSI0 BIT(1)
+# define CM_PLLD_LOADDSI0 BIT(0)
+
+#define CM_PLLH 0x110
+# define CM_PLLH_LOADRCAL BIT(2)
+# define CM_PLLH_LOADAUX BIT(1)
+# define CM_PLLH_LOADPIX BIT(0)
+
+#define CM_LOCK 0x114
+# define CM_LOCK_FLOCKH BIT(12)
+# define CM_LOCK_FLOCKD BIT(11)
+# define CM_LOCK_FLOCKC BIT(10)
+# define CM_LOCK_FLOCKB BIT(9)
+# define CM_LOCK_FLOCKA BIT(8)
+
+#define CM_EVENT 0x118
+#define CM_DSI1ECTL 0x158
+#define CM_DSI1EDIV 0x15c
+#define CM_DSI1PCTL 0x160
+#define CM_DSI1PDIV 0x164
+#define CM_DFTCTL 0x168
+#define CM_DFTDIV 0x16c
+
+#define CM_PLLB 0x170
+# define CM_PLLB_HOLDARM BIT(1)
+# define CM_PLLB_LOADARM BIT(0)
+
+#define A2W_PLLA_CTRL 0x1100
+#define A2W_PLLC_CTRL 0x1120
+#define A2W_PLLD_CTRL 0x1140
+#define A2W_PLLH_CTRL 0x1160
+#define A2W_PLLB_CTRL 0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE BIT(17)
+# define A2W_PLL_CTRL_PWRDN BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK 0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT 12
+# define A2W_PLL_CTRL_NDIV_MASK 0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT 0
+
+#define A2W_PLLA_ANA0 0x1010
+#define A2W_PLLC_ANA0 0x1030
+#define A2W_PLLD_ANA0 0x1050
+#define A2W_PLLH_ANA0 0x1070
+#define A2W_PLLB_ANA0 0x10f0
+
+#define A2W_PLL_KA_SHIFT 7
+#define A2W_PLL_KA_MASK GENMASK(9, 7)
+#define A2W_PLL_KI_SHIFT 19
+#define A2W_PLL_KI_MASK GENMASK(21, 19)
+#define A2W_PLL_KP_SHIFT 15
+#define A2W_PLL_KP_MASK GENMASK(18, 15)
+
+#define A2W_PLLH_KA_SHIFT 19
+#define A2W_PLLH_KA_MASK GENMASK(21, 19)
+#define A2W_PLLH_KI_LOW_SHIFT 22
+#define A2W_PLLH_KI_LOW_MASK GENMASK(23, 22)
+#define A2W_PLLH_KI_HIGH_SHIFT 0
+#define A2W_PLLH_KI_HIGH_MASK GENMASK(0, 0)
+#define A2W_PLLH_KP_SHIFT 1
+#define A2W_PLLH_KP_MASK GENMASK(4, 1)
+
+#define A2W_XOSC_CTRL 0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE BIT(0)
+
+#define A2W_PLLA_FRAC 0x1200
+#define A2W_PLLC_FRAC 0x1220
+#define A2W_PLLD_FRAC 0x1240
+#define A2W_PLLH_FRAC 0x1260
+#define A2W_PLLB_FRAC 0x12e0
+# define A2W_PLL_FRAC_MASK ((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS 20
+
+#define A2W_PLL_CHANNEL_DISABLE BIT(8)
+#define A2W_PLL_DIV_BITS 8
+#define A2W_PLL_DIV_SHIFT 0
+
+#define A2W_PLLA_DSI0 0x1300
+#define A2W_PLLA_CORE 0x1400
+#define A2W_PLLA_PER 0x1500
+#define A2W_PLLA_CCP2 0x1600
+
+#define A2W_PLLC_CORE2 0x1320
+#define A2W_PLLC_CORE1 0x1420
+#define A2W_PLLC_PER 0x1520
+#define A2W_PLLC_CORE0 0x1620
+
+#define A2W_PLLD_DSI0 0x1340
+#define A2W_PLLD_CORE 0x1440
+#define A2W_PLLD_PER 0x1540
+#define A2W_PLLD_DSI1 0x1640
+
+#define A2W_PLLH_AUX 0x1360
+#define A2W_PLLH_RCAL 0x1460
+#define A2W_PLLH_PIX 0x1560
+#define A2W_PLLH_STS 0x1660
+
+#define A2W_PLLH_CTRLR 0x1960
+#define A2W_PLLH_FRACR 0x1a60
+#define A2W_PLLH_AUXR 0x1b60
+#define A2W_PLLH_RCALR 0x1c60
+#define A2W_PLLH_PIXR 0x1d60
+#define A2W_PLLH_STSR 0x1e60
+
+#define A2W_PLLB_ARM 0x13e0
+#define A2W_PLLB_SP0 0x14e0
+#define A2W_PLLB_SP1 0x15e0
+#define A2W_PLLB_SP2 0x16e0
+
+#define LOCK_TIMEOUT_NS 100000000
+#define BCM2835_MAX_FB_RATE 1750000000u
+
+struct bcm2835_cprman {
+ struct device *dev;
+ void __iomem *regs;
+ spinlock_t regs_lock;
+ const char *osc_name;
+
+ struct clk_onecell_data onecell;
+ struct clk *clks[BCM2835_CLOCK_COUNT];
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+ writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+ return readl(cprman->regs + reg);
+}
+
+/*
+ * These are fixed clocks. They're probably not all root clocks and it may
+ * be possible to turn them on and off but until this is mapped out better
+ * it's the only way they can be used.
+ */
+void __init bcm2835_init_clocks(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
+ 126000000);
+ if (IS_ERR(clk))
+ pr_err("apb_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
+ 3000000);
+ if (IS_ERR(clk))
+ pr_err("uart0_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20201000.uart");
+ if (ret)
+ pr_err("uart0_pclk alias not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
+ 125000000);
+ if (IS_ERR(clk))
+ pr_err("uart1_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20215000.uart");
+ if (ret)
+ pr_err("uart1_pclk alias not registered\n");
+}
+
+struct bcm2835_pll_data {
+ const char *name;
+ u32 cm_ctrl_reg;
+ u32 a2w_ctrl_reg;
+ u32 frac_reg;
+ u32 ana_reg_base;
+ u32 reference_enable_mask;
+ /* Bit in CM_LOCK to indicate when the PLL has locked. */
+ u32 lock_mask;
+
+ const struct bcm2835_pll_ana_bits *ana;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+ /*
+ * Highest rate for the VCO before we have to use the
+ * pre-divide-by-2.
+ */
+ unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+ u32 mask0;
+ u32 set0;
+ u32 mask1;
+ u32 set1;
+ u32 mask3;
+ u32 set3;
+ u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+ .mask0 = 0,
+ .set0 = 0,
+ .mask1 = ~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+ .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+ .mask3 = ~A2W_PLL_KA_MASK,
+ .set3 = (2 << A2W_PLL_KA_SHIFT),
+ .fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+ .mask0 = ~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+ .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
+ .mask1 = ~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+ .set1 = (6 << A2W_PLLH_KP_SHIFT),
+ .mask3 = 0,
+ .set3 = 0,
+ .fb_prediv_mask = BIT(11),
+};
+
+/*
+ * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
+ * Port 2) transmitter clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plla_data = {
+ .name = "plla",
+ .cm_ctrl_reg = CM_PLLA,
+ .a2w_ctrl_reg = A2W_PLLA_CTRL,
+ .frac_reg = A2W_PLLA_FRAC,
+ .ana_reg_base = A2W_PLLA_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKA,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/* PLLB is used for the ARM's clock. */
+static const struct bcm2835_pll_data bcm2835_pllb_data = {
+ .name = "pllb",
+ .cm_ctrl_reg = CM_PLLB,
+ .a2w_ctrl_reg = A2W_PLLB_CTRL,
+ .frac_reg = A2W_PLLB_FRAC,
+ .ana_reg_base = A2W_PLLB_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKB,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+*/
+static const struct bcm2835_pll_data bcm2835_pllc_data = {
+ .name = "pllc",
+ .cm_ctrl_reg = CM_PLLC,
+ .a2w_ctrl_reg = A2W_PLLC_CTRL,
+ .frac_reg = A2W_PLLC_FRAC,
+ .ana_reg_base = A2W_PLLC_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKC,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLD is the display PLL, used to drive DSI display panels.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plld_data = {
+ .name = "plld",
+ .cm_ctrl_reg = CM_PLLD,
+ .a2w_ctrl_reg = A2W_PLLD_CTRL,
+ .frac_reg = A2W_PLLD_FRAC,
+ .ana_reg_base = A2W_PLLD_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKD,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLH is used to supply the pixel clock or the AUX clock for the TV
+ * encoder.
+ *
+ * It is in the HDMI power domain.
+ */
+static const struct bcm2835_pll_data bcm2835_pllh_data = {
+ "pllh",
+ .cm_ctrl_reg = CM_PLLH,
+ .a2w_ctrl_reg = A2W_PLLH_CTRL,
+ .frac_reg = A2W_PLLH_FRAC,
+ .ana_reg_base = A2W_PLLH_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKH,
+
+ .ana = &bcm2835_ana_pllh,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+struct bcm2835_pll_divider_data {
+ const char *name;
+ const struct bcm2835_pll_data *source_pll;
+ u32 cm_reg;
+ u32 a2w_reg;
+
+ u32 load_mask;
+ u32 hold_mask;
+ u32 fixed_divider;
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
+ .name = "plla_core",
+ .source_pll = &bcm2835_plla_data,
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_CORE,
+ .load_mask = CM_PLLA_LOADCORE,
+ .hold_mask = CM_PLLA_HOLDCORE,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
+ .name = "plla_per",
+ .source_pll = &bcm2835_plla_data,
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_PER,
+ .load_mask = CM_PLLA_LOADPER,
+ .hold_mask = CM_PLLA_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
+ .name = "pllb_arm",
+ .source_pll = &bcm2835_pllb_data,
+ .cm_reg = CM_PLLB,
+ .a2w_reg = A2W_PLLB_ARM,
+ .load_mask = CM_PLLB_LOADARM,
+ .hold_mask = CM_PLLB_HOLDARM,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
+ .name = "pllc_core0",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE0,
+ .load_mask = CM_PLLC_LOADCORE0,
+ .hold_mask = CM_PLLC_HOLDCORE0,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
+ .name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC, A2W_PLLC_CORE1,
+ .load_mask = CM_PLLC_LOADCORE1,
+ .hold_mask = CM_PLLC_HOLDCORE1,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
+ .name = "pllc_core2",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE2,
+ .load_mask = CM_PLLC_LOADCORE2,
+ .hold_mask = CM_PLLC_HOLDCORE2,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
+ .name = "pllc_per",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_PER,
+ .load_mask = CM_PLLC_LOADPER,
+ .hold_mask = CM_PLLC_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
+ .name = "plld_core",
+ .source_pll = &bcm2835_plld_data,
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_CORE,
+ .load_mask = CM_PLLD_LOADCORE,
+ .hold_mask = CM_PLLD_HOLDCORE,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
+ .name = "plld_per",
+ .source_pll = &bcm2835_plld_data,
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_PER,
+ .load_mask = CM_PLLD_LOADPER,
+ .hold_mask = CM_PLLD_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
+ .name = "pllh_rcal",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_RCAL,
+ .load_mask = CM_PLLH_LOADRCAL,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
+ .name = "pllh_aux",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_AUX,
+ .load_mask = CM_PLLH_LOADAUX,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
+ .name = "pllh_pix",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_PIX,
+ .load_mask = CM_PLLH_LOADPIX,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+struct bcm2835_clock_data {
+ const char *name;
+
+ const char *const *parents;
+ int num_mux_parents;
+
+ u32 ctl_reg;
+ u32 div_reg;
+
+ /* Number of integer bits in the divider */
+ u32 int_bits;
+ /* Number of fractional bits in the divider */
+ u32 frac_bits;
+
+ bool is_vpu_clock;
+};
+
+static const char *const bcm2835_clock_per_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_per",
+ "pllc_per",
+ "plld_per",
+ "pllh_aux",
+};
+
+static const char *const bcm2835_clock_vpu_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_core",
+ "pllc_core0",
+ "plld_core",
+ "pllh_aux",
+ "pllc_core1",
+ "pllc_core2",
+};
+
+static const char *const bcm2835_clock_osc_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1"
+};
+
+/*
+ * Used for a 1Mhz clock for the system clocksource, and also used by
+ * the watchdog timer and the camera pulse generator.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
+ .name = "timer",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_TIMERCTL,
+ .div_reg = CM_TIMERDIV,
+ .int_bits = 6,
+ .frac_bits = 12,
+};
+
+/* One Time Programmable Memory clock. Maximum 10Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
+ .name = "otp",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_OTPCTL,
+ .div_reg = CM_OTPDIV,
+ .int_bits = 4,
+ .frac_bits = 0,
+};
+
+/*
+ * VPU clock. This doesn't have an enable bit, since it drives the
+ * bus for everything else, and is special so it doesn't need to be
+ * gated for rate changes. It is also known as "clk_audio" in various
+ * hardware documentation.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
+ .name = "vpu",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_VPUCTL,
+ .div_reg = CM_VPUDIV,
+ .int_bits = 12,
+ .frac_bits = 8,
+ .is_vpu_clock = true,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
+ .name = "v3d",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_V3DCTL,
+ .div_reg = CM_V3DDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
+ .name = "isp",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_ISPCTL,
+ .div_reg = CM_ISPDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
+ .name = "h264",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_H264CTL,
+ .div_reg = CM_H264DIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+/* TV encoder clock. Only operating frequency is 108Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
+ .name = "vec",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_VECCTL,
+ .div_reg = CM_VECDIV,
+ .int_bits = 4,
+ .frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
+ .name = "uart",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_UARTCTL,
+ .div_reg = CM_UARTDIV,
+ .int_bits = 10,
+ .frac_bits = 12,
+};
+
+/* HDMI state machine */
+static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
+ .name = "hsm",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_HSMCTL,
+ .div_reg = CM_HSMDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+/*
+ * Secondary SDRAM clock. Used for low-voltage modes when the PLL in
+ * the SDRAM controller can't be used.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
+ .name = "sdram",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_SDCCTL,
+ .div_reg = CM_SDCDIV,
+ .int_bits = 6,
+ .frac_bits = 0,
+};
+
+/* Clock for the temperature sensor. Generally run at 2Mhz, max 5Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
+ .name = "tsens",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_TSENSCTL,
+ .div_reg = CM_TSENSDIV,
+ .int_bits = 5,
+ .frac_bits = 0,
+};
+
+/* Arasan EMMC clock */
+static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
+ .name = "emmc",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_EMMCCTL,
+ .div_reg = CM_EMMCDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+struct bcm2835_pll {
+ struct clk_hw hw;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+
+ return cprman_read(cprman, data->a2w_ctrl_reg) &
+ A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+ unsigned long parent_rate,
+ u32 *ndiv, u32 *fdiv)
+{
+ u64 div;
+
+ div = (u64)rate << A2W_PLL_FRAC_BITS;
+ do_div(div, parent_rate);
+
+ *ndiv = div >> A2W_PLL_FRAC_BITS;
+ *fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+ u32 ndiv, u32 fdiv, u32 pdiv)
+{
+ u64 rate;
+
+ if (pdiv == 0)
+ return 0;
+
+ rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+ do_div(rate, pdiv);
+ return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ u32 ndiv, fdiv;
+
+ bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+ return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+ u32 ndiv, pdiv, fdiv;
+ bool using_prediv;
+
+ if (parent_rate == 0)
+ return 0;
+
+ fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+ ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+ pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+ using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+ data->ana->fb_prediv_mask;
+
+ if (using_prediv)
+ ndiv *= 2;
+
+ return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+
+ cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+ cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ ktime_t timeout;
+
+ /* Take the PLL out of reset. */
+ cprman_write(cprman, data->cm_ctrl_reg,
+ cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+
+ /* Wait for the PLL to lock. */
+ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+ while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+ clk_hw_get_name(hw));
+ return -ETIMEDOUT;
+ }
+
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+ int i;
+
+ /*
+ * ANA register setup is done as a series of writes to
+ * ANA3-ANA0, in that order. This lets us write all 4
+ * registers as a single cycle of the serdes interface (taking
+ * 100 xosc clocks), whereas if we were to update ana0, 1, and
+ * 3 individually through their partial-write registers, each
+ * would be their own serdes cycle.
+ */
+ for (i = 3; i >= 0; i--)
+ cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+ u32 ndiv, fdiv, a2w_ctl;
+ u32 ana[4];
+ int i;
+
+ if (rate < data->min_rate || rate > data->max_rate) {
+ dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
+ clk_hw_get_name(hw), rate,
+ data->min_rate, data->max_rate);
+ return -EINVAL;
+ }
+
+ if (rate > data->max_fb_rate) {
+ use_fb_prediv = true;
+ rate /= 2;
+ } else {
+ use_fb_prediv = false;
+ }
+
+ bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+ for (i = 3; i >= 0; i--)
+ ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+ was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+
+ ana[0] &= ~data->ana->mask0;
+ ana[0] |= data->ana->set0;
+ ana[1] &= ~data->ana->mask1;
+ ana[1] |= data->ana->set1;
+ ana[3] &= ~data->ana->mask3;
+ ana[3] |= data->ana->set3;
+
+ if (was_using_prediv && !use_fb_prediv) {
+ ana[1] &= ~data->ana->fb_prediv_mask;
+ do_ana_setup_first = true;
+ } else if (!was_using_prediv && use_fb_prediv) {
+ ana[1] |= data->ana->fb_prediv_mask;
+ do_ana_setup_first = false;
+ } else {
+ do_ana_setup_first = true;
+ }
+
+ /* Unmask the reference clock from the oscillator. */
+ cprman_write(cprman, A2W_XOSC_CTRL,
+ cprman_read(cprman, A2W_XOSC_CTRL) |
+ data->reference_enable_mask);
+
+ if (do_ana_setup_first)
+ bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+ /* Set the PLL multiplier from the oscillator. */
+ cprman_write(cprman, data->frac_reg, fdiv);
+
+ a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+ a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+ a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+ a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+ a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
+ cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+ if (!do_ana_setup_first)
+ bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+ .is_prepared = bcm2835_pll_is_on,
+ .prepare = bcm2835_pll_on,
+ .unprepare = bcm2835_pll_off,
+ .recalc_rate = bcm2835_pll_get_rate,
+ .set_rate = bcm2835_pll_set_rate,
+ .round_rate = bcm2835_pll_round_rate,
+};
+
+struct bcm2835_pll_divider {
+ struct clk_divider div;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+ return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return clk_divider_ops.round_rate(hw, rate, parent_rate);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+ u32 div = cprman_read(cprman, data->a2w_reg);
+
+ div &= (1 << A2W_PLL_DIV_BITS) - 1;
+ if (div == 0)
+ div = 256;
+
+ return parent_rate / div;
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ cprman_write(cprman, data->cm_reg,
+ (cprman_read(cprman, data->cm_reg) &
+ ~data->load_mask) | data->hold_mask);
+ cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ cprman_write(cprman, data->a2w_reg,
+ cprman_read(cprman, data->a2w_reg) &
+ ~A2W_PLL_CHANNEL_DISABLE);
+
+ cprman_write(cprman, data->cm_reg,
+ cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+
+ return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+ u32 cm;
+ int ret;
+
+ ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+ if (ret)
+ return ret;
+
+ cm = cprman_read(cprman, data->cm_reg);
+ cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+ cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+ .is_prepared = bcm2835_pll_divider_is_on,
+ .prepare = bcm2835_pll_divider_on,
+ .unprepare = bcm2835_pll_divider_off,
+ .recalc_rate = bcm2835_pll_divider_get_rate,
+ .set_rate = bcm2835_pll_divider_set_rate,
+ .round_rate = bcm2835_pll_divider_round_rate,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+ struct clk_hw hw;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+ return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 unused_frac_mask = GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0);
+ u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+ u32 div;
+
+ do_div(temp, rate);
+ div = temp;
+
+ /* Round and mask off the unused bits */
+ if (unused_frac_mask != 0) {
+ div += unused_frac_mask >> 1;
+ div &= ~unused_frac_mask;
+ }
+
+ /* Clamp to the limits. */
+ div = max(div, unused_frac_mask + 1);
+ div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+ CM_DIV_FRAC_BITS - data->frac_bits));
+
+ return div;
+}
+
+static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+ unsigned long parent_rate,
+ u32 div)
+{
+ const struct bcm2835_clock_data *data = clock->data;
+ u64 temp;
+
+ /*
+ * The divisor is a 12.12 fixed point field, but only some of
+ * the bits are populated in any given clock.
+ */
+ div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+ div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+ if (div == 0)
+ return 0;
+
+ temp = (u64)parent_rate << data->frac_bits;
+
+ do_div(temp, div);
+
+ return temp;
+}
+
+static long bcm2835_clock_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate);
+
+ return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 div = cprman_read(cprman, data->div_reg);
+
+ return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+
+ while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+ if (ktime_after(ktime_get(), timeout)) {
+ dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+ clk_hw_get_name(&clock->hw));
+ return;
+ }
+ cpu_relax();
+ }
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ spin_lock(&cprman->regs_lock);
+ cprman_write(cprman, data->ctl_reg,
+ cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+ spin_unlock(&cprman->regs_lock);
+
+ /* BUSY will remain high until the divider completes its cycle. */
+ bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ spin_lock(&cprman->regs_lock);
+ cprman_write(cprman, data->ctl_reg,
+ cprman_read(cprman, data->ctl_reg) |
+ CM_ENABLE |
+ CM_GATE);
+ spin_unlock(&cprman->regs_lock);
+
+ return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+
+ cprman_write(cprman, data->div_reg, div);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+ .is_prepared = bcm2835_clock_is_on,
+ .prepare = bcm2835_clock_on,
+ .unprepare = bcm2835_clock_off,
+ .recalc_rate = bcm2835_clock_get_rate,
+ .set_rate = bcm2835_clock_set_rate,
+ .round_rate = bcm2835_clock_round_rate,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+ return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+ .is_prepared = bcm2835_vpu_clock_is_on,
+ .recalc_rate = bcm2835_clock_get_rate,
+ .set_rate = bcm2835_clock_set_rate,
+ .round_rate = bcm2835_clock_round_rate,
+};
+
+static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+ const struct bcm2835_pll_data *data)
+{
+ struct bcm2835_pll *pll;
+ struct clk_init_data init;
+
+ memset(&init, 0, sizeof(init));
+
+ /* All of the PLLs derive from the external oscillator. */
+ init.parent_names = &cprman->osc_name;
+ init.num_parents = 1;
+ init.name = data->name;
+ init.ops = &bcm2835_pll_clk_ops;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return NULL;
+
+ pll->cprman = cprman;
+ pll->data = data;
+ pll->hw.init = &init;
+
+ return devm_clk_register(cprman->dev, &pll->hw);
+}
+
+static struct clk *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+ const struct bcm2835_pll_divider_data *data)
+{
+ struct bcm2835_pll_divider *divider;
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *divider_name;
+
+ if (data->fixed_divider != 1) {
+ divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+ "%s_prediv", data->name);
+ if (!divider_name)
+ return NULL;
+ } else {
+ divider_name = data->name;
+ }
+
+ memset(&init, 0, sizeof(init));
+
+ init.parent_names = &data->source_pll->name;
+ init.num_parents = 1;
+ init.name = divider_name;
+ init.ops = &bcm2835_pll_divider_clk_ops;
+ init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+
+ divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
+ if (!divider)
+ return NULL;
+
+ divider->div.reg = cprman->regs + data->a2w_reg;
+ divider->div.shift = A2W_PLL_DIV_SHIFT;
+ divider->div.width = A2W_PLL_DIV_BITS;
+ divider->div.flags = 0;
+ divider->div.lock = &cprman->regs_lock;
+ divider->div.hw.init = &init;
+ divider->div.table = NULL;
+
+ divider->cprman = cprman;
+ divider->data = data;
+
+ clk = devm_clk_register(cprman->dev, ÷r->div.hw);
+ if (IS_ERR(clk))
+ return clk;
+
+ /*
+ * PLLH's channels have a fixed divide by 10 afterwards, which
+ * is what our consumers are actually using.
+ */
+ if (data->fixed_divider != 1) {
+ return clk_register_fixed_factor(cprman->dev, data->name,
+ divider_name,
+ CLK_SET_RATE_PARENT,
+ 1,
+ data->fixed_divider);
+ }
+
+ return clk;
+}
+
+static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+ const struct bcm2835_clock_data *data)
+{
+ struct bcm2835_clock *clock;
+ struct clk_init_data init;
+ const char *parent;
+
+ /*
+ * Most of the clock generators have a mux field, so we
+ * instantiate a generic mux as our parent to handle it.
+ */
+ if (data->num_mux_parents) {
+ const char *parents[1 << CM_SRC_BITS];
+ int i;
+
+ parent = devm_kasprintf(cprman->dev, GFP_KERNEL,
+ "mux_%s", data->name);
+ if (!parent)
+ return NULL;
+
+ /*
+ * Replace our "xosc" references with the oscillator's
+ * actual name.
+ */
+ for (i = 0; i < data->num_mux_parents; i++) {
+ if (strcmp(data->parents[i], "xosc") == 0)
+ parents[i] = cprman->osc_name;
+ else
+ parents[i] = data->parents[i];
+ }
+
+ clk_register_mux(cprman->dev, parent,
+ parents, data->num_mux_parents,
+ CLK_SET_RATE_PARENT,
+ cprman->regs + data->ctl_reg,
+ CM_SRC_SHIFT, CM_SRC_BITS,
+ 0, &cprman->regs_lock);
+ } else {
+ parent = data->parents[0];
+ }
+
+ memset(&init, 0, sizeof(init));
+ init.parent_names = &parent;
+ init.num_parents = 1;
+ init.name = data->name;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ if (data->is_vpu_clock) {
+ init.ops = &bcm2835_vpu_clock_clk_ops;
+ } else {
+ init.ops = &bcm2835_clock_clk_ops;
+ init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+ }
+
+ clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+ if (!clock)
+ return NULL;
+
+ clock->cprman = cprman;
+ clock->data = data;
+ clock->hw.init = &init;
+
+ return devm_clk_register(cprman->dev, &clock->hw);
+}
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk **clks;
+ struct bcm2835_cprman *cprman;
+ struct resource *res;
+
+ cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
+ if (!cprman)
+ return -ENOMEM;
+
+ spin_lock_init(&cprman->regs_lock);
+ cprman->dev = dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ cprman->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cprman->regs))
+ return PTR_ERR(cprman->regs);
+
+ cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0);
+ if (!cprman->osc_name)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, cprman);
+
+ cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
+ cprman->onecell.clks = cprman->clks;
+ clks = cprman->clks;
+
+ clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
+ clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
+ clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
+ clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
+ clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);
+
+ clks[BCM2835_PLLA_CORE] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
+ clks[BCM2835_PLLA_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
+ clks[BCM2835_PLLC_CORE0] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
+ clks[BCM2835_PLLC_CORE1] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
+ clks[BCM2835_PLLC_CORE2] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
+ clks[BCM2835_PLLC_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
+ clks[BCM2835_PLLD_CORE] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
+ clks[BCM2835_PLLD_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
+ clks[BCM2835_PLLH_RCAL] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
+ clks[BCM2835_PLLH_AUX] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
+ clks[BCM2835_PLLH_PIX] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);
+
+ clks[BCM2835_CLOCK_TIMER] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
+ clks[BCM2835_CLOCK_OTP] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
+ clks[BCM2835_CLOCK_TSENS] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
+ clks[BCM2835_CLOCK_VPU] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
+ clks[BCM2835_CLOCK_V3D] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+ clks[BCM2835_CLOCK_ISP] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
+ clks[BCM2835_CLOCK_H264] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
+ clks[BCM2835_CLOCK_V3D] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+ clks[BCM2835_CLOCK_SDRAM] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
+ clks[BCM2835_CLOCK_UART] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
+ clks[BCM2835_CLOCK_VEC] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
+ clks[BCM2835_CLOCK_HSM] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
+ clks[BCM2835_CLOCK_EMMC] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);
+
+ /*
+ * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+ * you have the debug bit set in the power manager, which we
+ * don't bother exposing) are individual gates off of the
+ * non-stop vpu clock.
+ */
+ clks[BCM2835_CLOCK_PERI_IMAGE] =
+ clk_register_gate(dev, "peri_image", "vpu",
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ cprman->regs + CM_PERIICTL, CM_GATE_BIT,
+ 0, &cprman->regs_lock);
+
+ return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
+ &cprman->onecell);
+}
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+ { .compatible = "brcm,bcm2835-cprman", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+ .driver = {
+ .name = "bcm2835-clk",
+ .of_match_table = bcm2835_clk_of_match,
+ },
+ .probe = bcm2835_clk_probe,
+};
+
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 clock driver");
+MODULE_LICENSE("GPL v2");
#define REG_SDIO0XIN_CLKCTL 0x0158
#define REG_SDIO1XIN_CLKCTL 0x015c
-#define MAX_CLKS 27
+#define MAX_CLKS 28
static struct clk *clks[MAX_CLKS];
static struct clk_onecell_data clk_data;
static DEFINE_SPINLOCK(lock);
gd->bit_idx, 0, &lock);
}
- /*
- * twdclk is derived from cpu/3
- * TODO: use cpupll until cpuclk is not available
- */
+ /* cpuclk divider is fixed to 1 */
+ clks[CLKID_CPU] =
+ clk_register_fixed_factor(NULL, "cpu", clk_names[CPUPLL],
+ 0, 1, 1);
+ /* twdclk is derived from cpu/3 */
clks[CLKID_TWD] =
- clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL],
- 0, 1, 3);
+ clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
/* check for errors on leaf clocks */
for (n = 0; n < MAX_CLKS; n++) {
+++ /dev/null
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/clk/bcm2835.h>
-#include <linux/of.h>
-
-/*
- * These are fixed clocks. They're probably not all root clocks and it may
- * be possible to turn them on and off but until this is mapped out better
- * it's the only way they can be used.
- */
-void __init bcm2835_init_clocks(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
- 126000000);
- if (IS_ERR(clk))
- pr_err("apb_pclk not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
- 3000000);
- if (IS_ERR(clk))
- pr_err("uart0_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20201000.uart");
- if (ret)
- pr_err("uart0_pclk alias not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
- 125000000);
- if (IS_ERR(clk))
- pr_err("uart1_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20215000.uart");
- if (ret)
- pr_err("uart1_pclk alias not registered\n");
-}
--- /dev/null
+/*
+ * Copyright (C) 2015 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define to_clk_multiplier(_hw) container_of(_hw, struct clk_multiplier, hw)
+
+static unsigned long __get_mult(struct clk_multiplier *mult,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ if (mult->flags & CLK_MULTIPLIER_ROUND_CLOSEST)
+ return DIV_ROUND_CLOSEST(rate, parent_rate);
+
+ return rate / parent_rate;
+}
+
+static unsigned long clk_multiplier_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_multiplier *mult = to_clk_multiplier(hw);
+ unsigned long val;
+
+ val = clk_readl(mult->reg) >> mult->shift;
+ val &= GENMASK(mult->width - 1, 0);
+
+ if (!val && mult->flags & CLK_MULTIPLIER_ZERO_BYPASS)
+ val = 1;
+
+ return parent_rate * val;
+}
+
+static bool __is_best_rate(unsigned long rate, unsigned long new,
+ unsigned long best, unsigned long flags)
+{
+ if (flags & CLK_MULTIPLIER_ROUND_CLOSEST)
+ return abs(rate - new) < abs(rate - best);
+
+ return new >= rate && new < best;
+}
+
+static unsigned long __bestmult(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ u8 width, unsigned long flags)
+{
+ unsigned long orig_parent_rate = *best_parent_rate;
+ unsigned long parent_rate, current_rate, best_rate = ~0;
+ unsigned int i, bestmult = 0;
+
+ if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT))
+ return rate / *best_parent_rate;
+
+ for (i = 1; i < ((1 << width) - 1); i++) {
+ if (rate == orig_parent_rate * i) {
+ /*
+ * This is the best case for us if we have a
+ * perfect match without changing the parent
+ * rate.
+ */
+ *best_parent_rate = orig_parent_rate;
+ return i;
+ }
+
+ parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
+ rate / i);
+ current_rate = parent_rate * i;
+
+ if (__is_best_rate(rate, current_rate, best_rate, flags)) {
+ bestmult = i;
+ best_rate = current_rate;
+ *best_parent_rate = parent_rate;
+ }
+ }
+
+ return bestmult;
+}
+
+static long clk_multiplier_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_multiplier *mult = to_clk_multiplier(hw);
+ unsigned long factor = __bestmult(hw, rate, parent_rate,
+ mult->width, mult->flags);
+
+ return *parent_rate * factor;
+}
+
+static int clk_multiplier_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_multiplier *mult = to_clk_multiplier(hw);
+ unsigned long factor = __get_mult(mult, rate, parent_rate);
+ unsigned long flags = 0;
+ unsigned long val;
+
+ if (mult->lock)
+ spin_lock_irqsave(mult->lock, flags);
+ else
+ __acquire(mult->lock);
+
+ val = clk_readl(mult->reg);
+ val &= ~GENMASK(mult->width + mult->shift - 1, mult->shift);
+ val |= factor << mult->shift;
+ clk_writel(val, mult->reg);
+
+ if (mult->lock)
+ spin_unlock_irqrestore(mult->lock, flags);
+ else
+ __release(mult->lock);
+
+ return 0;
+}
+
+const struct clk_ops clk_multiplier_ops = {
+ .recalc_rate = clk_multiplier_recalc_rate,
+ .round_rate = clk_multiplier_round_rate,
+ .set_rate = clk_multiplier_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_multiplier_ops);
+
+struct clk *clk_register_multiplier(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mult_flags, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_multiplier *mult;
+ struct clk *clk;
+
+ mult = kmalloc(sizeof(*mult), GFP_KERNEL);
+ if (!mult)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_multiplier_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ mult->reg = reg;
+ mult->shift = shift;
+ mult->width = width;
+ mult->flags = clk_mult_flags;
+ mult->lock = lock;
+ mult->hw.init = &init;
+
+ clk = clk_register(dev, &mult->hw);
+ if (IS_ERR(clk))
+ kfree(mult);
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(clk_register_multiplier);
+
+void clk_unregister_multiplier(struct clk *clk)
+{
+ struct clk_multiplier *mult;
+ struct clk_hw *hw;
+
+ hw = __clk_get_hw(clk);
+ if (!hw)
+ return;
+
+ mult = to_clk_multiplier(hw);
+
+ clk_unregister(clk);
+ kfree(mult);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_multiplier);
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/fsl/guts.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/slab.h>
-struct cmux_clk {
+#define PLL_DIV1 0
+#define PLL_DIV2 1
+#define PLL_DIV3 2
+#define PLL_DIV4 3
+
+#define PLATFORM_PLL 0
+#define CGA_PLL1 1
+#define CGA_PLL2 2
+#define CGA_PLL3 3
+#define CGA_PLL4 4 /* only on clockgen-1.0, which lacks CGB */
+#define CGB_PLL1 4
+#define CGB_PLL2 5
+
+struct clockgen_pll_div {
+ struct clk *clk;
+ char name[32];
+};
+
+struct clockgen_pll {
+ struct clockgen_pll_div div[4];
+};
+
+#define CLKSEL_VALID 1
+#define CLKSEL_80PCT 2 /* Only allowed if PLL <= 80% of max cpu freq */
+
+struct clockgen_sourceinfo {
+ u32 flags; /* CLKSEL_xxx */
+ int pll; /* CGx_PLLn */
+ int div; /* PLL_DIVn */
+};
+
+#define NUM_MUX_PARENTS 16
+
+struct clockgen_muxinfo {
+ struct clockgen_sourceinfo clksel[NUM_MUX_PARENTS];
+};
+
+#define NUM_HWACCEL 5
+#define NUM_CMUX 8
+
+struct clockgen;
+
+/*
+ * cmux freq must be >= platform pll.
+ * If not set, cmux freq must be >= platform pll/2
+ */
+#define CG_CMUX_GE_PLAT 1
+
+#define CG_PLL_8BIT 2 /* PLLCnGSR[CFG] is 8 bits, not 6 */
+#define CG_VER3 4 /* version 3 cg: reg layout different */
+#define CG_LITTLE_ENDIAN 8
+
+struct clockgen_chipinfo {
+ const char *compat, *guts_compat;
+ const struct clockgen_muxinfo *cmux_groups[2];
+ const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL];
+ void (*init_periph)(struct clockgen *cg);
+ int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */
+ u32 pll_mask; /* 1 << n bit set if PLL n is valid */
+ u32 flags; /* CG_xxx */
+};
+
+struct clockgen {
+ struct device_node *node;
+ void __iomem *regs;
+ struct clockgen_chipinfo info; /* mutable copy */
+ struct clk *sysclk;
+ struct clockgen_pll pll[6];
+ struct clk *cmux[NUM_CMUX];
+ struct clk *hwaccel[NUM_HWACCEL];
+ struct clk *fman[2];
+ struct ccsr_guts __iomem *guts;
+};
+
+static struct clockgen clockgen;
+
+static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg)
+{
+ if (cg->info.flags & CG_LITTLE_ENDIAN)
+ iowrite32(val, reg);
+ else
+ iowrite32be(val, reg);
+}
+
+static u32 cg_in(struct clockgen *cg, u32 __iomem *reg)
+{
+ u32 val;
+
+ if (cg->info.flags & CG_LITTLE_ENDIAN)
+ val = ioread32(reg);
+ else
+ val = ioread32be(reg);
+
+ return val;
+}
+
+static const struct clockgen_muxinfo p2041_cmux_grp1 = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ }
+};
+
+static const struct clockgen_muxinfo p2041_cmux_grp2 = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp1 = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+ }
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp2 = {
+ {
+ [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp1 = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp2 = {
+ {
+ [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp1 = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ [8] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL3, PLL_DIV1 },
+ }
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp2 = {
+ {
+ [0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+ [8] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+ [9] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+ [12] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV1 },
+ [13] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo t1023_cmux = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ }
+};
+
+static const struct clockgen_muxinfo t1040_cmux = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ }
+};
+
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga = {
+ {
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL3, PLL_DIV4 },
+ },
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga12 = {
+ {
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+ },
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
+ {
+ { CLKSEL_VALID, CGB_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGB_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+ },
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa1 = {
+ {
+ {},
+ {},
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ {},
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa2 = {
+ {
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo t1023_hwa1 = {
+ {
+ {},
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo t1023_hwa2 = {
+ {
+ [6] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ },
+};
+
+static const struct clockgen_muxinfo t2080_hwa1 = {
+ {
+ {},
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo t2080_hwa2 = {
+ {
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo t4240_hwa1 = {
+ {
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo t4240_hwa4 = {
+ {
+ [2] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+ [3] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+ [4] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+ [5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ [6] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+ },
+};
+
+static const struct clockgen_muxinfo t4240_hwa5 = {
+ {
+ [2] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+ [3] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV3 },
+ [4] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+ [5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ [6] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+ [7] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+ },
+};
+
+#define RCWSR7_FM1_CLK_SEL 0x40000000
+#define RCWSR7_FM2_CLK_SEL 0x20000000
+#define RCWSR7_HWA_ASYNC_DIV 0x04000000
+
+static void __init p2041_init_periph(struct clockgen *cg)
+{
+ u32 reg;
+
+ reg = ioread32be(&cg->guts->rcwsr[7]);
+
+ if (reg & RCWSR7_FM1_CLK_SEL)
+ cg->fman[0] = cg->pll[CGA_PLL2].div[PLL_DIV2].clk;
+ else
+ cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p4080_init_periph(struct clockgen *cg)
+{
+ u32 reg;
+
+ reg = ioread32be(&cg->guts->rcwsr[7]);
+
+ if (reg & RCWSR7_FM1_CLK_SEL)
+ cg->fman[0] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+ else
+ cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+ if (reg & RCWSR7_FM2_CLK_SEL)
+ cg->fman[1] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+ else
+ cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5020_init_periph(struct clockgen *cg)
+{
+ u32 reg;
+ int div = PLL_DIV2;
+
+ reg = ioread32be(&cg->guts->rcwsr[7]);
+ if (reg & RCWSR7_HWA_ASYNC_DIV)
+ div = PLL_DIV4;
+
+ if (reg & RCWSR7_FM1_CLK_SEL)
+ cg->fman[0] = cg->pll[CGA_PLL2].div[div].clk;
+ else
+ cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5040_init_periph(struct clockgen *cg)
+{
+ u32 reg;
+ int div = PLL_DIV2;
+
+ reg = ioread32be(&cg->guts->rcwsr[7]);
+ if (reg & RCWSR7_HWA_ASYNC_DIV)
+ div = PLL_DIV4;
+
+ if (reg & RCWSR7_FM1_CLK_SEL)
+ cg->fman[0] = cg->pll[CGA_PLL3].div[div].clk;
+ else
+ cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+ if (reg & RCWSR7_FM2_CLK_SEL)
+ cg->fman[1] = cg->pll[CGA_PLL3].div[div].clk;
+ else
+ cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init t1023_init_periph(struct clockgen *cg)
+{
+ cg->fman[0] = cg->hwaccel[1];
+}
+
+static void __init t1040_init_periph(struct clockgen *cg)
+{
+ cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk;
+}
+
+static void __init t2080_init_periph(struct clockgen *cg)
+{
+ cg->fman[0] = cg->hwaccel[0];
+}
+
+static void __init t4240_init_periph(struct clockgen *cg)
+{
+ cg->fman[0] = cg->hwaccel[3];
+ cg->fman[1] = cg->hwaccel[4];
+}
+
+static const struct clockgen_chipinfo chipinfo[] = {
+ {
+ .compat = "fsl,b4420-clockgen",
+ .guts_compat = "fsl,b4860-device-config",
+ .init_periph = t2080_init_periph,
+ .cmux_groups = {
+ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+ },
+ .hwaccel = {
+ &t2080_hwa1
+ },
+ .cmux_to_group = {
+ 0, 1, 1, 1, -1
+ },
+ .pll_mask = 0x3f,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,b4860-clockgen",
+ .guts_compat = "fsl,b4860-device-config",
+ .init_periph = t2080_init_periph,
+ .cmux_groups = {
+ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+ },
+ .hwaccel = {
+ &t2080_hwa1
+ },
+ .cmux_to_group = {
+ 0, 1, 1, 1, -1
+ },
+ .pll_mask = 0x3f,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,ls1021a-clockgen",
+ .cmux_groups = {
+ &t1023_cmux
+ },
+ .cmux_to_group = {
+ 0, -1
+ },
+ .pll_mask = 0x03,
+ },
+ {
+ .compat = "fsl,ls1043a-clockgen",
+ .init_periph = t2080_init_periph,
+ .cmux_groups = {
+ &t1040_cmux
+ },
+ .hwaccel = {
+ &ls1043a_hwa1, &ls1043a_hwa2
+ },
+ .cmux_to_group = {
+ 0, -1
+ },
+ .pll_mask = 0x07,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,ls2080a-clockgen",
+ .cmux_groups = {
+ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+ },
+ .cmux_to_group = {
+ 0, 0, 1, 1, -1
+ },
+ .pll_mask = 0x37,
+ .flags = CG_VER3 | CG_LITTLE_ENDIAN,
+ },
+ {
+ .compat = "fsl,p2041-clockgen",
+ .guts_compat = "fsl,qoriq-device-config-1.0",
+ .init_periph = p2041_init_periph,
+ .cmux_groups = {
+ &p2041_cmux_grp1, &p2041_cmux_grp2
+ },
+ .cmux_to_group = {
+ 0, 0, 1, 1, -1
+ },
+ .pll_mask = 0x07,
+ },
+ {
+ .compat = "fsl,p3041-clockgen",
+ .guts_compat = "fsl,qoriq-device-config-1.0",
+ .init_periph = p2041_init_periph,
+ .cmux_groups = {
+ &p2041_cmux_grp1, &p2041_cmux_grp2
+ },
+ .cmux_to_group = {
+ 0, 0, 1, 1, -1
+ },
+ .pll_mask = 0x07,
+ },
+ {
+ .compat = "fsl,p4080-clockgen",
+ .guts_compat = "fsl,qoriq-device-config-1.0",
+ .init_periph = p4080_init_periph,
+ .cmux_groups = {
+ &p4080_cmux_grp1, &p4080_cmux_grp2
+ },
+ .cmux_to_group = {
+ 0, 0, 0, 0, 1, 1, 1, 1
+ },
+ .pll_mask = 0x1f,
+ },
+ {
+ .compat = "fsl,p5020-clockgen",
+ .guts_compat = "fsl,qoriq-device-config-1.0",
+ .init_periph = p5020_init_periph,
+ .cmux_groups = {
+ &p2041_cmux_grp1, &p2041_cmux_grp2
+ },
+ .cmux_to_group = {
+ 0, 1, -1
+ },
+ .pll_mask = 0x07,
+ },
+ {
+ .compat = "fsl,p5040-clockgen",
+ .guts_compat = "fsl,p5040-device-config",
+ .init_periph = p5040_init_periph,
+ .cmux_groups = {
+ &p5040_cmux_grp1, &p5040_cmux_grp2
+ },
+ .cmux_to_group = {
+ 0, 0, 1, 1, -1
+ },
+ .pll_mask = 0x0f,
+ },
+ {
+ .compat = "fsl,t1023-clockgen",
+ .guts_compat = "fsl,t1023-device-config",
+ .init_periph = t1023_init_periph,
+ .cmux_groups = {
+ &t1023_cmux
+ },
+ .hwaccel = {
+ &t1023_hwa1, &t1023_hwa2
+ },
+ .cmux_to_group = {
+ 0, 0, -1
+ },
+ .pll_mask = 0x03,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,t1040-clockgen",
+ .guts_compat = "fsl,t1040-device-config",
+ .init_periph = t1040_init_periph,
+ .cmux_groups = {
+ &t1040_cmux
+ },
+ .cmux_to_group = {
+ 0, 0, 0, 0, -1
+ },
+ .pll_mask = 0x07,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,t2080-clockgen",
+ .guts_compat = "fsl,t2080-device-config",
+ .init_periph = t2080_init_periph,
+ .cmux_groups = {
+ &clockgen2_cmux_cga12
+ },
+ .hwaccel = {
+ &t2080_hwa1, &t2080_hwa2
+ },
+ .cmux_to_group = {
+ 0, -1
+ },
+ .pll_mask = 0x07,
+ .flags = CG_PLL_8BIT,
+ },
+ {
+ .compat = "fsl,t4240-clockgen",
+ .guts_compat = "fsl,t4240-device-config",
+ .init_periph = t4240_init_periph,
+ .cmux_groups = {
+ &clockgen2_cmux_cga, &clockgen2_cmux_cgb
+ },
+ .hwaccel = {
+ &t4240_hwa1, NULL, NULL, &t4240_hwa4, &t4240_hwa5
+ },
+ .cmux_to_group = {
+ 0, 0, 1, -1
+ },
+ .pll_mask = 0x3f,
+ .flags = CG_PLL_8BIT,
+ },
+ {},
+};
+
+struct mux_hwclock {
struct clk_hw hw;
- void __iomem *reg;
- unsigned int clk_per_pll;
- u32 flags;
+ struct clockgen *cg;
+ const struct clockgen_muxinfo *info;
+ u32 __iomem *reg;
+ u8 parent_to_clksel[NUM_MUX_PARENTS];
+ s8 clksel_to_parent[NUM_MUX_PARENTS];
+ int num_parents;
};
-#define PLL_KILL BIT(31)
+#define to_mux_hwclock(p) container_of(p, struct mux_hwclock, hw)
+#define CLKSEL_MASK 0x78000000
#define CLKSEL_SHIFT 27
-#define CLKSEL_ADJUST BIT(0)
-#define to_cmux_clk(p) container_of(p, struct cmux_clk, hw)
-static int cmux_set_parent(struct clk_hw *hw, u8 idx)
+static int mux_set_parent(struct clk_hw *hw, u8 idx)
{
- struct cmux_clk *clk = to_cmux_clk(hw);
+ struct mux_hwclock *hwc = to_mux_hwclock(hw);
u32 clksel;
- clksel = ((idx / clk->clk_per_pll) << 2) + idx % clk->clk_per_pll;
- if (clk->flags & CLKSEL_ADJUST)
- clksel += 8;
- clksel = (clksel & 0xf) << CLKSEL_SHIFT;
- iowrite32be(clksel, clk->reg);
+ if (idx >= hwc->num_parents)
+ return -EINVAL;
+
+ clksel = hwc->parent_to_clksel[idx];
+ cg_out(hwc->cg, (clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg);
return 0;
}
-static u8 cmux_get_parent(struct clk_hw *hw)
+static u8 mux_get_parent(struct clk_hw *hw)
{
- struct cmux_clk *clk = to_cmux_clk(hw);
+ struct mux_hwclock *hwc = to_mux_hwclock(hw);
u32 clksel;
+ s8 ret;
- clksel = ioread32be(clk->reg);
- clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
- if (clk->flags & CLKSEL_ADJUST)
- clksel -= 8;
- clksel = (clksel >> 2) * clk->clk_per_pll + clksel % 4;
+ clksel = (cg_in(hwc->cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
- return clksel;
+ ret = hwc->clksel_to_parent[clksel];
+ if (ret < 0) {
+ pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg);
+ return 0;
+ }
+
+ return ret;
}
static const struct clk_ops cmux_ops = {
- .get_parent = cmux_get_parent,
- .set_parent = cmux_set_parent,
+ .get_parent = mux_get_parent,
+ .set_parent = mux_set_parent,
};
-static void __init core_mux_init(struct device_node *np)
+/*
+ * Don't allow setting for now, as the clock options haven't been
+ * sanitized for additional restrictions.
+ */
+static const struct clk_ops hwaccel_ops = {
+ .get_parent = mux_get_parent,
+};
+
+static const struct clockgen_pll_div *get_pll_div(struct clockgen *cg,
+ struct mux_hwclock *hwc,
+ int idx)
{
- struct clk *clk;
- struct clk_init_data init;
- struct cmux_clk *cmux_clk;
- struct device_node *node;
- int rc, count, i;
- u32 offset;
- const char *clk_name;
- const char **parent_names;
- struct of_phandle_args clkspec;
+ int pll, div;
- rc = of_property_read_u32(np, "reg", &offset);
- if (rc) {
- pr_err("%s: could not get reg property\n", np->name);
- return;
- }
+ if (!(hwc->info->clksel[idx].flags & CLKSEL_VALID))
+ return NULL;
- /* get the input clock source count */
- count = of_property_count_strings(np, "clock-names");
- if (count < 0) {
- pr_err("%s: get clock count error\n", np->name);
- return;
- }
- parent_names = kcalloc(count, sizeof(char *), GFP_KERNEL);
- if (!parent_names)
- return;
+ pll = hwc->info->clksel[idx].pll;
+ div = hwc->info->clksel[idx].div;
- for (i = 0; i < count; i++)
- parent_names[i] = of_clk_get_parent_name(np, i);
+ return &cg->pll[pll].div[div];
+}
- cmux_clk = kzalloc(sizeof(*cmux_clk), GFP_KERNEL);
- if (!cmux_clk)
- goto err_name;
+static struct clk * __init create_mux_common(struct clockgen *cg,
+ struct mux_hwclock *hwc,
+ const struct clk_ops *ops,
+ unsigned long min_rate,
+ unsigned long pct80_rate,
+ const char *fmt, int idx)
+{
+ struct clk_init_data init = {};
+ struct clk *clk;
+ const struct clockgen_pll_div *div;
+ const char *parent_names[NUM_MUX_PARENTS];
+ char name[32];
+ int i, j;
- cmux_clk->reg = of_iomap(np, 0);
- if (!cmux_clk->reg) {
- pr_err("%s: could not map register\n", __func__);
- goto err_clk;
- }
+ snprintf(name, sizeof(name), fmt, idx);
- rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", 0,
- &clkspec);
- if (rc) {
- pr_err("%s: parse clock node error\n", __func__);
- goto err_clk;
- }
+ for (i = 0, j = 0; i < NUM_MUX_PARENTS; i++) {
+ unsigned long rate;
- cmux_clk->clk_per_pll = of_property_count_strings(clkspec.np,
- "clock-output-names");
- of_node_put(clkspec.np);
+ hwc->clksel_to_parent[i] = -1;
- node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
- if (node && (offset >= 0x80))
- cmux_clk->flags = CLKSEL_ADJUST;
+ div = get_pll_div(cg, hwc, i);
+ if (!div)
+ continue;
- rc = of_property_read_string_index(np, "clock-output-names",
- 0, &clk_name);
- if (rc) {
- pr_err("%s: read clock names error\n", np->name);
- goto err_clk;
+ rate = clk_get_rate(div->clk);
+
+ if (hwc->info->clksel[i].flags & CLKSEL_80PCT &&
+ rate > pct80_rate)
+ continue;
+ if (rate < min_rate)
+ continue;
+
+ parent_names[j] = div->name;
+ hwc->parent_to_clksel[j] = i;
+ hwc->clksel_to_parent[i] = j;
+ j++;
}
- init.name = clk_name;
- init.ops = &cmux_ops;
+ init.name = name;
+ init.ops = ops;
init.parent_names = parent_names;
- init.num_parents = count;
+ init.num_parents = hwc->num_parents = j;
init.flags = 0;
- cmux_clk->hw.init = &init;
+ hwc->hw.init = &init;
+ hwc->cg = cg;
- clk = clk_register(NULL, &cmux_clk->hw);
+ clk = clk_register(NULL, &hwc->hw);
if (IS_ERR(clk)) {
- pr_err("%s: could not register clock\n", clk_name);
- goto err_clk;
+ pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+ PTR_ERR(clk));
+ kfree(hwc);
+ return NULL;
+ }
+
+ return clk;
+}
+
+static struct clk * __init create_one_cmux(struct clockgen *cg, int idx)
+{
+ struct mux_hwclock *hwc;
+ const struct clockgen_pll_div *div;
+ unsigned long plat_rate, min_rate;
+ u64 pct80_rate;
+ u32 clksel;
+
+ hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+ if (!hwc)
+ return NULL;
+
+ hwc->reg = cg->regs + 0x20 * idx;
+ hwc->info = cg->info.cmux_groups[cg->info.cmux_to_group[idx]];
+
+ /*
+ * Find the rate for the default clksel, and treat it as the
+ * maximum rated core frequency. If this is an incorrect
+ * assumption, certain clock options (possibly including the
+ * default clksel) may be inappropriately excluded on certain
+ * chips.
+ */
+ clksel = (cg_in(cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
+ div = get_pll_div(cg, hwc, clksel);
+ if (!div)
+ return NULL;
+
+ pct80_rate = clk_get_rate(div->clk);
+ pct80_rate *= 8;
+ do_div(pct80_rate, 10);
+
+ plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk);
+
+ if (cg->info.flags & CG_CMUX_GE_PLAT)
+ min_rate = plat_rate;
+ else
+ min_rate = plat_rate / 2;
+
+ return create_mux_common(cg, hwc, &cmux_ops, min_rate,
+ pct80_rate, "cg-cmux%d", idx);
+}
+
+static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx)
+{
+ struct mux_hwclock *hwc;
+
+ hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+ if (!hwc)
+ return NULL;
+
+ hwc->reg = cg->regs + 0x20 * idx + 0x10;
+ hwc->info = cg->info.hwaccel[idx];
+
+ return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0,
+ "cg-hwaccel%d", idx);
+}
+
+static void __init create_muxes(struct clockgen *cg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cg->cmux); i++) {
+ if (cg->info.cmux_to_group[i] < 0)
+ break;
+ if (cg->info.cmux_to_group[i] >=
+ ARRAY_SIZE(cg->info.cmux_groups)) {
+ WARN_ON_ONCE(1);
+ continue;
+ }
+
+ cg->cmux[i] = create_one_cmux(cg, i);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cg->hwaccel); i++) {
+ if (!cg->info.hwaccel[i])
+ continue;
+
+ cg->hwaccel[i] = create_one_hwaccel(cg, i);
}
+}
+
+static void __init clockgen_init(struct device_node *np);
+
+/* Legacy nodes may get probed before the parent clockgen node */
+static void __init legacy_init_clockgen(struct device_node *np)
+{
+ if (!clockgen.node)
+ clockgen_init(of_get_parent(np));
+}
+
+/* Legacy node */
+static void __init core_mux_init(struct device_node *np)
+{
+ struct clk *clk;
+ struct resource res;
+ int idx, rc;
+
+ legacy_init_clockgen(np);
+
+ if (of_address_to_resource(np, 0, &res))
+ return;
+
+ idx = (res.start & 0xf0) >> 5;
+ clk = clockgen.cmux[idx];
rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
if (rc) {
- pr_err("Could not register clock provider for node:%s\n",
- np->name);
- goto err_clk;
+ pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+ __func__, np->name, rc);
+ return;
}
- goto err_name;
+}
+
+static struct clk *sysclk_from_fixed(struct device_node *node, const char *name)
+{
+ u32 rate;
+
+ if (of_property_read_u32(node, "clock-frequency", &rate))
+ return ERR_PTR(-ENODEV);
-err_clk:
- kfree(cmux_clk);
-err_name:
- /* free *_names because they are reallocated when registered */
- kfree(parent_names);
+ return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
}
-static void __init core_pll_init(struct device_node *np)
+static struct clk *sysclk_from_parent(const char *name)
+{
+ struct clk *clk;
+ const char *parent_name;
+
+ clk = of_clk_get(clockgen.node, 0);
+ if (IS_ERR(clk))
+ return clk;
+
+ /* Register the input clock under the desired name. */
+ parent_name = __clk_get_name(clk);
+ clk = clk_register_fixed_factor(NULL, name, parent_name,
+ 0, 1, 1);
+ if (IS_ERR(clk))
+ pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+ PTR_ERR(clk));
+
+ return clk;
+}
+
+static struct clk * __init create_sysclk(const char *name)
+{
+ struct device_node *sysclk;
+ struct clk *clk;
+
+ clk = sysclk_from_fixed(clockgen.node, name);
+ if (!IS_ERR(clk))
+ return clk;
+
+ clk = sysclk_from_parent(name);
+ if (!IS_ERR(clk))
+ return clk;
+
+ sysclk = of_get_child_by_name(clockgen.node, "sysclk");
+ if (sysclk) {
+ clk = sysclk_from_fixed(sysclk, name);
+ if (!IS_ERR(clk))
+ return clk;
+ }
+
+ pr_err("%s: No input clock\n", __func__);
+ return NULL;
+}
+
+/* Legacy node */
+static void __init sysclk_init(struct device_node *node)
{
+ struct clk *clk;
+
+ legacy_init_clockgen(node);
+
+ clk = clockgen.sysclk;
+ if (clk)
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+#define PLL_KILL BIT(31)
+
+static void __init create_one_pll(struct clockgen *cg, int idx)
+{
+ u32 __iomem *reg;
u32 mult;
- int i, rc, count;
- const char *clk_name, *parent_name;
- struct clk_onecell_data *onecell_data;
- struct clk **subclks;
- void __iomem *base;
+ struct clockgen_pll *pll = &cg->pll[idx];
+ int i;
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("iomap error\n");
+ if (!(cg->info.pll_mask & (1 << idx)))
return;
+
+ if (cg->info.flags & CG_VER3) {
+ switch (idx) {
+ case PLATFORM_PLL:
+ reg = cg->regs + 0x60080;
+ break;
+ case CGA_PLL1:
+ reg = cg->regs + 0x80;
+ break;
+ case CGA_PLL2:
+ reg = cg->regs + 0xa0;
+ break;
+ case CGB_PLL1:
+ reg = cg->regs + 0x10080;
+ break;
+ case CGB_PLL2:
+ reg = cg->regs + 0x100a0;
+ break;
+ default:
+ WARN_ONCE(1, "index %d\n", idx);
+ return;
+ }
+ } else {
+ if (idx == PLATFORM_PLL)
+ reg = cg->regs + 0xc00;
+ else
+ reg = cg->regs + 0x800 + 0x20 * (idx - 1);
}
- /* get the multiple of PLL */
- mult = ioread32be(base);
+ /* Get the multiple of PLL */
+ mult = cg_in(cg, reg);
- /* check if this PLL is disabled */
+ /* Check if this PLL is disabled */
if (mult & PLL_KILL) {
- pr_debug("PLL:%s is disabled\n", np->name);
- goto err_map;
+ pr_debug("%s(): pll %p disabled\n", __func__, reg);
+ return;
}
- mult = (mult >> 1) & 0x3f;
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name) {
- pr_err("PLL: %s must have a parent\n", np->name);
- goto err_map;
+ if ((cg->info.flags & CG_VER3) ||
+ ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL))
+ mult = (mult & GENMASK(8, 1)) >> 1;
+ else
+ mult = (mult & GENMASK(6, 1)) >> 1;
+
+ for (i = 0; i < ARRAY_SIZE(pll->div); i++) {
+ struct clk *clk;
+
+ snprintf(pll->div[i].name, sizeof(pll->div[i].name),
+ "cg-pll%d-div%d", idx, i + 1);
+
+ clk = clk_register_fixed_factor(NULL,
+ pll->div[i].name, "cg-sysclk", 0, mult, i + 1);
+ if (IS_ERR(clk)) {
+ pr_err("%s: %s: register failed %ld\n",
+ __func__, pll->div[i].name, PTR_ERR(clk));
+ continue;
+ }
+
+ pll->div[i].clk = clk;
}
+}
+static void __init create_plls(struct clockgen *cg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cg->pll); i++)
+ create_one_pll(cg, i);
+}
+
+static void __init legacy_pll_init(struct device_node *np, int idx)
+{
+ struct clockgen_pll *pll;
+ struct clk_onecell_data *onecell_data;
+ struct clk **subclks;
+ int count, rc;
+
+ legacy_init_clockgen(np);
+
+ pll = &clockgen.pll[idx];
count = of_property_count_strings(np, "clock-output-names");
- if (count < 0 || count > 4) {
- pr_err("%s: clock is not supported\n", np->name);
- goto err_map;
- }
- subclks = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
+ BUILD_BUG_ON(ARRAY_SIZE(pll->div) < 4);
+ subclks = kcalloc(4, sizeof(struct clk *), GFP_KERNEL);
if (!subclks)
- goto err_map;
+ return;
onecell_data = kmalloc(sizeof(*onecell_data), GFP_KERNEL);
if (!onecell_data)
goto err_clks;
- for (i = 0; i < count; i++) {
- rc = of_property_read_string_index(np, "clock-output-names",
- i, &clk_name);
- if (rc) {
- pr_err("%s: could not get clock names\n", np->name);
- goto err_cell;
- }
-
- /*
- * when count == 4, there are 4 output clocks:
- * /1, /2, /3, /4 respectively
- * when count < 4, there are at least 2 output clocks:
- * /1, /2, (/4, if count == 3) respectively.
- */
- if (count == 4)
- subclks[i] = clk_register_fixed_factor(NULL, clk_name,
- parent_name, 0, mult, 1 + i);
- else
-
- subclks[i] = clk_register_fixed_factor(NULL, clk_name,
- parent_name, 0, mult, 1 << i);
-
- if (IS_ERR(subclks[i])) {
- pr_err("%s: could not register clock\n", clk_name);
- goto err_cell;
- }
+ if (count <= 3) {
+ subclks[0] = pll->div[0].clk;
+ subclks[1] = pll->div[1].clk;
+ subclks[2] = pll->div[3].clk;
+ } else {
+ subclks[0] = pll->div[0].clk;
+ subclks[1] = pll->div[1].clk;
+ subclks[2] = pll->div[2].clk;
+ subclks[3] = pll->div[3].clk;
}
onecell_data->clks = subclks;
rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
if (rc) {
- pr_err("Could not register clk provider for node:%s\n",
- np->name);
+ pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+ __func__, np->name, rc);
goto err_cell;
}
- iounmap(base);
return;
err_cell:
kfree(onecell_data);
err_clks:
kfree(subclks);
-err_map:
- iounmap(base);
}
-static void __init sysclk_init(struct device_node *node)
+/* Legacy node */
+static void __init pltfrm_pll_init(struct device_node *np)
{
- struct clk *clk;
- const char *clk_name = node->name;
- struct device_node *np = of_get_parent(node);
- u32 rate;
+ legacy_pll_init(np, PLATFORM_PLL);
+}
- if (!np) {
- pr_err("could not get parent node\n");
+/* Legacy node */
+static void __init core_pll_init(struct device_node *np)
+{
+ struct resource res;
+ int idx;
+
+ if (of_address_to_resource(np, 0, &res))
return;
+
+ if ((res.start & 0xfff) == 0xc00) {
+ /*
+ * ls1021a devtree labels the platform PLL
+ * with the core PLL compatible
+ */
+ pltfrm_pll_init(np);
+ } else {
+ idx = (res.start & 0xf0) >> 5;
+ legacy_pll_init(np, CGA_PLL1 + idx);
}
+}
- if (of_property_read_u32(np, "clock-frequency", &rate)) {
- of_node_put(node);
- return;
+static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct clockgen *cg = data;
+ struct clk *clk;
+ struct clockgen_pll *pll;
+ u32 type, idx;
+
+ if (clkspec->args_count < 2) {
+ pr_err("%s: insufficient phandle args\n", __func__);
+ return ERR_PTR(-EINVAL);
}
- of_property_read_string(np, "clock-output-names", &clk_name);
+ type = clkspec->args[0];
+ idx = clkspec->args[1];
- clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
- if (!IS_ERR(clk))
- of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ switch (type) {
+ case 0:
+ if (idx != 0)
+ goto bad_args;
+ clk = cg->sysclk;
+ break;
+ case 1:
+ if (idx >= ARRAY_SIZE(cg->cmux))
+ goto bad_args;
+ clk = cg->cmux[idx];
+ break;
+ case 2:
+ if (idx >= ARRAY_SIZE(cg->hwaccel))
+ goto bad_args;
+ clk = cg->hwaccel[idx];
+ break;
+ case 3:
+ if (idx >= ARRAY_SIZE(cg->fman))
+ goto bad_args;
+ clk = cg->fman[idx];
+ break;
+ case 4:
+ pll = &cg->pll[PLATFORM_PLL];
+ if (idx >= ARRAY_SIZE(pll->div))
+ goto bad_args;
+ clk = pll->div[idx].clk;
+ break;
+ default:
+ goto bad_args;
+ }
+
+ if (!clk)
+ return ERR_PTR(-ENOENT);
+ return clk;
+
+bad_args:
+ pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx);
+ return ERR_PTR(-EINVAL);
}
-static void __init pltfrm_pll_init(struct device_node *np)
+#ifdef CONFIG_PPC
+#include <asm/mpc85xx.h>
+
+static const u32 a4510_svrs[] __initconst = {
+ (SVR_P2040 << 8) | 0x10, /* P2040 1.0 */
+ (SVR_P2040 << 8) | 0x11, /* P2040 1.1 */
+ (SVR_P2041 << 8) | 0x10, /* P2041 1.0 */
+ (SVR_P2041 << 8) | 0x11, /* P2041 1.1 */
+ (SVR_P3041 << 8) | 0x10, /* P3041 1.0 */
+ (SVR_P3041 << 8) | 0x11, /* P3041 1.1 */
+ (SVR_P4040 << 8) | 0x20, /* P4040 2.0 */
+ (SVR_P4080 << 8) | 0x20, /* P4080 2.0 */
+ (SVR_P5010 << 8) | 0x10, /* P5010 1.0 */
+ (SVR_P5010 << 8) | 0x20, /* P5010 2.0 */
+ (SVR_P5020 << 8) | 0x10, /* P5020 1.0 */
+ (SVR_P5021 << 8) | 0x10, /* P5021 1.0 */
+ (SVR_P5040 << 8) | 0x10, /* P5040 1.0 */
+};
+
+#define SVR_SECURITY 0x80000 /* The Security (E) bit */
+
+static bool __init has_erratum_a4510(void)
{
- void __iomem *base;
- uint32_t mult;
- const char *parent_name, *clk_name;
- int i, _errno;
- struct clk_onecell_data *cod;
+ u32 svr = mfspr(SPRN_SVR);
+ int i;
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name);
- return;
+ svr &= ~SVR_SECURITY;
+
+ for (i = 0; i < ARRAY_SIZE(a4510_svrs); i++) {
+ if (svr == a4510_svrs[i])
+ return true;
}
- /* Get the multiple of PLL */
- mult = ioread32be(base);
+ return false;
+}
+#else
+static bool __init has_erratum_a4510(void)
+{
+ return false;
+}
+#endif
- iounmap(base);
+static void __init clockgen_init(struct device_node *np)
+{
+ int i, ret;
+ bool is_old_ls1021a = false;
- /* Check if this PLL is disabled */
- if (mult & PLL_KILL) {
- pr_debug("%s(): %s: Disabled\n", __func__, np->name);
+ /* May have already been called by a legacy probe */
+ if (clockgen.node)
return;
- }
- mult = (mult & GENMASK(6, 1)) >> 1;
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name) {
- pr_err("%s(): %s: of_clk_get_parent_name() failed\n",
- __func__, np->name);
+ clockgen.node = np;
+ clockgen.regs = of_iomap(np, 0);
+ if (!clockgen.regs &&
+ of_device_is_compatible(of_root, "fsl,ls1021a")) {
+ /* Compatibility hack for old, broken device trees */
+ clockgen.regs = ioremap(0x1ee1000, 0x1000);
+ is_old_ls1021a = true;
+ }
+ if (!clockgen.regs) {
+ pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name);
return;
}
- i = of_property_count_strings(np, "clock-output-names");
- if (i < 0) {
- pr_err("%s(): %s: of_property_count_strings(clock-output-names) = %d\n",
- __func__, np->name, i);
- return;
+ for (i = 0; i < ARRAY_SIZE(chipinfo); i++) {
+ if (of_device_is_compatible(np, chipinfo[i].compat))
+ break;
+ if (is_old_ls1021a &&
+ !strcmp(chipinfo[i].compat, "fsl,ls1021a-clockgen"))
+ break;
}
- cod = kmalloc(sizeof(*cod) + i * sizeof(struct clk *), GFP_KERNEL);
- if (!cod)
- return;
- cod->clks = (struct clk **)(cod + 1);
- cod->clk_num = i;
-
- for (i = 0; i < cod->clk_num; i++) {
- _errno = of_property_read_string_index(np, "clock-output-names",
- i, &clk_name);
- if (_errno < 0) {
- pr_err("%s(): %s: of_property_read_string_index(clock-output-names) = %d\n",
- __func__, np->name, _errno);
- goto return_clk_unregister;
- }
+ if (i == ARRAY_SIZE(chipinfo)) {
+ pr_err("%s: unknown clockgen node %s\n", __func__,
+ np->full_name);
+ goto err;
+ }
+ clockgen.info = chipinfo[i];
+
+ if (clockgen.info.guts_compat) {
+ struct device_node *guts;
- cod->clks[i] = clk_register_fixed_factor(NULL, clk_name,
- parent_name, 0, mult, 1 + i);
- if (IS_ERR(cod->clks[i])) {
- pr_err("%s(): %s: clk_register_fixed_factor(%s) = %ld\n",
- __func__, np->name,
- clk_name, PTR_ERR(cod->clks[i]));
- goto return_clk_unregister;
+ guts = of_find_compatible_node(NULL, NULL,
+ clockgen.info.guts_compat);
+ if (guts) {
+ clockgen.guts = of_iomap(guts, 0);
+ if (!clockgen.guts) {
+ pr_err("%s: Couldn't map %s regs\n", __func__,
+ guts->full_name);
+ }
}
+
}
- _errno = of_clk_add_provider(np, of_clk_src_onecell_get, cod);
- if (_errno < 0) {
- pr_err("%s(): %s: of_clk_add_provider() = %d\n",
- __func__, np->name, _errno);
- goto return_clk_unregister;
+ if (has_erratum_a4510())
+ clockgen.info.flags |= CG_CMUX_GE_PLAT;
+
+ clockgen.sysclk = create_sysclk("cg-sysclk");
+ create_plls(&clockgen);
+ create_muxes(&clockgen);
+
+ if (clockgen.info.init_periph)
+ clockgen.info.init_periph(&clockgen);
+
+ ret = of_clk_add_provider(np, clockgen_clk_get, &clockgen);
+ if (ret) {
+ pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+ __func__, np->name, ret);
}
return;
-
-return_clk_unregister:
- while (--i >= 0)
- clk_unregister(cod->clks[i]);
- kfree(cod);
+err:
+ iounmap(clockgen.regs);
+ clockgen.regs = NULL;
}
+CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+
+/* Legacy nodes */
CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
CLK_OF_DECLARE(qoriq_sysclk_2, "fsl,qoriq-sysclk-2.0", sysclk_init);
CLK_OF_DECLARE(qoriq_core_pll_1, "fsl,qoriq-core-pll-1.0", core_pll_init);
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) Protocol based clock driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_clk {
+ u32 id;
+ struct clk_hw hw;
+ struct scpi_dvfs_info *info;
+ struct scpi_ops *scpi_ops;
+};
+
+#define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw)
+
+static struct platform_device *cpufreq_dev;
+
+static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_get_val(clk->id);
+}
+
+static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * We can't figure out what rate it will be, so just return the
+ * rate back to the caller. scpi_clk_recalc_rate() will be called
+ * after the rate is set and we'll know what rate the clock is
+ * running at then.
+ */
+ return rate;
+}
+
+static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_set_val(clk->id, rate);
+}
+
+static const struct clk_ops scpi_clk_ops = {
+ .recalc_rate = scpi_clk_recalc_rate,
+ .round_rate = scpi_clk_round_rate,
+ .set_rate = scpi_clk_set_rate,
+};
+
+/* find closest match to given frequency in OPP table */
+static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx;
+ u32 fmin = 0, fmax = ~0, ftmp;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < clk->info->count; idx++, opp++) {
+ ftmp = opp->freq;
+ if (ftmp >= (u32)rate) {
+ if (ftmp <= fmax)
+ fmax = ftmp;
+ break;
+ } else if (ftmp >= fmin) {
+ fmin = ftmp;
+ }
+ }
+ return fmax != ~0 ? fmax : fmin;
+}
+
+static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int idx = clk->scpi_ops->dvfs_get_idx(clk->id);
+ const struct scpi_opp *opp;
+
+ if (idx < 0)
+ return 0;
+
+ opp = clk->info->opps + idx;
+ return opp->freq;
+}
+
+static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return __scpi_dvfs_round_rate(clk, rate);
+}
+
+static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx, max_opp = clk->info->count;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < max_opp; idx++, opp++)
+ if (opp->freq == rate)
+ return idx;
+ return -EINVAL;
+}
+
+static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int ret = __scpi_find_dvfs_index(clk, rate);
+
+ if (ret < 0)
+ return ret;
+ return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret);
+}
+
+static const struct clk_ops scpi_dvfs_ops = {
+ .recalc_rate = scpi_dvfs_recalc_rate,
+ .round_rate = scpi_dvfs_round_rate,
+ .set_rate = scpi_dvfs_set_rate,
+};
+
+static const struct of_device_id scpi_clk_match[] = {
+ { .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, },
+ { .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, },
+ {}
+};
+
+static struct clk *
+scpi_clk_ops_init(struct device *dev, const struct of_device_id *match,
+ struct scpi_clk *sclk, const char *name)
+{
+ struct clk_init_data init;
+ struct clk *clk;
+ unsigned long min = 0, max = 0;
+
+ init.name = name;
+ init.flags = CLK_IS_ROOT;
+ init.num_parents = 0;
+ init.ops = match->data;
+ sclk->hw.init = &init;
+ sclk->scpi_ops = get_scpi_ops();
+
+ if (init.ops == &scpi_dvfs_ops) {
+ sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id);
+ if (IS_ERR(sclk->info))
+ return NULL;
+ } else if (init.ops == &scpi_clk_ops) {
+ if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max)
+ return NULL;
+ } else {
+ return NULL;
+ }
+
+ clk = devm_clk_register(dev, &sclk->hw);
+ if (!IS_ERR(clk) && max)
+ clk_hw_set_rate_range(&sclk->hw, min, max);
+ return clk;
+}
+
+struct scpi_clk_data {
+ struct scpi_clk **clk;
+ unsigned int clk_num;
+};
+
+static struct clk *
+scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct scpi_clk *sclk;
+ struct scpi_clk_data *clk_data = data;
+ unsigned int idx = clkspec->args[0], count;
+
+ for (count = 0; count < clk_data->clk_num; count++) {
+ sclk = clk_data->clk[count];
+ if (idx == sclk->id)
+ return sclk->hw.clk;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int scpi_clk_add(struct device *dev, struct device_node *np,
+ const struct of_device_id *match)
+{
+ struct clk **clks;
+ int idx, count;
+ struct scpi_clk_data *clk_data;
+
+ count = of_property_count_strings(np, "clock-output-names");
+ if (count < 0) {
+ dev_err(dev, "%s: invalid clock output count\n", np->name);
+ return -EINVAL;
+ }
+
+ clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->clk_num = count;
+ clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk),
+ GFP_KERNEL);
+ if (!clk_data->clk)
+ return -ENOMEM;
+
+ clks = devm_kcalloc(dev, count, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
+ for (idx = 0; idx < count; idx++) {
+ struct scpi_clk *sclk;
+ const char *name;
+ u32 val;
+
+ sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL);
+ if (!sclk)
+ return -ENOMEM;
+
+ if (of_property_read_string_index(np, "clock-output-names",
+ idx, &name)) {
+ dev_err(dev, "invalid clock name @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_index(np, "clock-indices",
+ idx, &val)) {
+ dev_err(dev, "invalid clock index @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ sclk->id = val;
+
+ clks[idx] = scpi_clk_ops_init(dev, match, sclk, name);
+ if (IS_ERR_OR_NULL(clks[idx]))
+ dev_err(dev, "failed to register clock '%s'\n", name);
+ else
+ dev_dbg(dev, "Registered clock '%s'\n", name);
+ clk_data->clk[idx] = sclk;
+ }
+
+ return of_clk_add_provider(np, scpi_of_clk_src_get, clk_data);
+}
+
+static int scpi_clocks_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+
+ if (cpufreq_dev) {
+ platform_device_unregister(cpufreq_dev);
+ cpufreq_dev = NULL;
+ }
+
+ for_each_available_child_of_node(np, child)
+ of_clk_del_provider(np);
+ return 0;
+}
+
+static int scpi_clocks_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+ const struct of_device_id *match;
+
+ if (!get_scpi_ops())
+ return -ENXIO;
+
+ for_each_available_child_of_node(np, child) {
+ match = of_match_node(scpi_clk_match, child);
+ if (!match)
+ continue;
+ ret = scpi_clk_add(dev, child, match);
+ if (ret) {
+ scpi_clocks_remove(pdev);
+ return ret;
+ }
+ }
+ /* Add the virtual cpufreq device */
+ cpufreq_dev = platform_device_register_simple("scpi-cpufreq",
+ -1, NULL, 0);
+ if (!cpufreq_dev)
+ pr_warn("unable to register cpufreq device");
+
+ return 0;
+}
+
+static const struct of_device_id scpi_clocks_ids[] = {
+ { .compatible = "arm,scpi-clocks", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, scpi_clocks_ids);
+
+static struct platform_driver scpi_clocks_driver = {
+ .driver = {
+ .name = "scpi_clocks",
+ .of_match_table = scpi_clocks_ids,
+ },
+ .probe = scpi_clocks_probe,
+ .remove = scpi_clocks_remove,
+};
+module_platform_driver(scpi_clocks_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI clock driver");
+MODULE_LICENSE("GPL v2");
if (IS_ERR(r))
return PTR_ERR(r);
- l = clkdev_create(r, alias, "%s", alias_dev_name);
+ l = clkdev_create(r, alias, alias_dev_name ? "%s" : NULL,
+ alias_dev_name);
clk_put(r);
return l ? 0 : -ENODEV;
const char *parent_name;
void __iomem *divcr = NULL;
int width;
+ int offset;
num_parents = of_clk_get_parent_count(node);
if (num_parents < 1) {
pr_err("%s: failed to map divide register", clk_name);
goto error;
}
+ offset = (unsigned long)divcr & 3;
+ offset = (3 - offset) * 8;
+ divcr = (void *)((unsigned long)divcr & ~3);
parent_name = of_clk_get_parent_name(node, 0);
of_property_read_u32(node, "renesas,width", &width);
clk = clk_register_divider(NULL, clk_name, parent_name,
- CLK_SET_RATE_GATE, divcr, 0, width,
+ CLK_SET_RATE_GATE, divcr, offset, width,
CLK_DIVIDER_POWER_OF_TWO, &clklock);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
static struct clk *clk[clk_max];
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[uart_ipg_per],
+ &clk[uart1_ipg],
+ &clk[uart2_ipg],
+ &clk[uart3_ipg],
+ &clk[uart4_ipg],
+ &clk[uart5_ipg],
+ NULL
+};
+
static int __init __mx25_clocks_init(unsigned long osc_rate,
void __iomem *ccm_base)
{
*/
clk_set_parent(clk[cko_sel], clk[ipg]);
+ imx_register_uart_clocks(uart_clks);
+
return 0;
}
static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[IMX27_CLK_PER1_GATE],
+ &clk[IMX27_CLK_UART1_IPG_GATE],
+ &clk[IMX27_CLK_UART2_IPG_GATE],
+ &clk[IMX27_CLK_UART3_IPG_GATE],
+ &clk[IMX27_CLK_UART4_IPG_GATE],
+ &clk[IMX27_CLK_UART5_IPG_GATE],
+ &clk[IMX27_CLK_UART6_IPG_GATE],
+ NULL
+};
+
static void __init _mx27_clocks_init(unsigned long fref)
{
BUG_ON(!ccm);
clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
+ imx_register_uart_clocks(uart_clks);
+
imx_print_silicon_rev("i.MX27", mx27_revision());
}
static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
-int __init mx31_clocks_init(unsigned long fref)
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[ipg],
+ &clk[uart1_gate],
+ &clk[uart2_gate],
+ &clk[uart3_gate],
+ &clk[uart4_gate],
+ &clk[uart5_gate],
+ NULL
+};
+
+static void __init _mx31_clocks_init(unsigned long fref)
{
void __iomem *base;
struct device_node *np;
imx_check_clocks(clk, ARRAY_SIZE(clk));
+ clk_set_parent(clk[csi], clk[upll]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ mx31_revision();
+ clk_disable_unprepare(clk[iim_gate]);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
if (np) {
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+}
+
+int __init mx31_clocks_init(void)
+{
+ u32 fref = 26000000; /* default */
+
+ _mx31_clocks_init(fref);
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
- clk_set_parent(clk[csi], clk[upll]);
- clk_prepare_enable(clk[emi_gate]);
- clk_prepare_enable(clk[iim_gate]);
- mx31_revision();
- clk_disable_unprepare(clk[iim_gate]);
+ imx_register_uart_clocks(uart_clks);
mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
return 0;
break;
}
- return mx31_clocks_init(fref);
+ _mx31_clocks_init(fref);
+
+ return 0;
}
static struct clk *clk[clk_max];
-int __init mx35_clocks_init(void)
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[ipg],
+ &clk[uart1_gate],
+ &clk[uart2_gate],
+ &clk[uart3_gate],
+ NULL
+};
+
+static void __init _mx35_clocks_init(void)
{
void __iomem *base;
u32 pdr0, consumer_sel, hsp_sel;
imx_check_clocks(clk, ARRAY_SIZE(clk));
+ clk_prepare_enable(clk[spba_gate]);
+ clk_prepare_enable(clk[gpio1_gate]);
+ clk_prepare_enable(clk[gpio2_gate]);
+ clk_prepare_enable(clk[gpio3_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
+ clk_prepare_enable(clk[iomuxc_gate]);
+
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
+ imx_register_uart_clocks(uart_clks);
+
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+}
+
+int __init mx35_clocks_init(void)
+{
+ _mx35_clocks_init();
+
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_register_clkdev(clk[admux_gate], "audmux", NULL);
- clk_prepare_enable(clk[spba_gate]);
- clk_prepare_enable(clk[gpio1_gate]);
- clk_prepare_enable(clk[gpio2_gate]);
- clk_prepare_enable(clk[gpio3_gate]);
- clk_prepare_enable(clk[iim_gate]);
- clk_prepare_enable(clk[emi_gate]);
- clk_prepare_enable(clk[max_gate]);
- clk_prepare_enable(clk[iomuxc_gate]);
-
- /*
- * SCC is needed to boot via mmc after a watchdog reset. The clock code
- * before conversion to common clk also enabled UART1 (which isn't
- * handled here and not needed for mmc) and IIM (which is enabled
- * unconditionally above).
- */
- clk_prepare_enable(clk[scc_gate]);
-
- imx_print_silicon_rev("i.MX35", mx35_revision());
-
mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);
return 0;
static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
{
+ _mx35_clocks_init();
+
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
-
- mx35_clocks_init();
}
CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[IMX5_CLK_UART1_IPG_GATE],
+ &clk[IMX5_CLK_UART1_PER_GATE],
+ &clk[IMX5_CLK_UART2_IPG_GATE],
+ &clk[IMX5_CLK_UART2_PER_GATE],
+ &clk[IMX5_CLK_UART3_IPG_GATE],
+ &clk[IMX5_CLK_UART3_PER_GATE],
+ &clk[IMX5_CLK_UART4_IPG_GATE],
+ &clk[IMX5_CLK_UART4_PER_GATE],
+ &clk[IMX5_CLK_UART5_IPG_GATE],
+ &clk[IMX5_CLK_UART5_PER_GATE],
+ NULL
+};
+
static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
+
+ imx_register_uart_clocks(uart_clks);
}
static void __init mx50_clocks_init(struct device_node *np)
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
static unsigned int share_count_mipi_core_cfg;
+static unsigned int share_count_spdif;
static inline int clk_on_imx6q(void)
{
return of_machine_is_compatible("fsl,imx6dl");
}
+static struct clk ** const uart_clks[] __initconst = {
+ &clk[IMX6QDL_CLK_UART_IPG],
+ &clk[IMX6QDL_CLK_UART_SERIAL],
+ NULL
+};
+
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4);
clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
+ clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_spdif);
+ clk[IMX6QDL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
+
+ imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
+static unsigned int share_count_spdif;
static struct clk *clks[IMX6SL_CLK_END];
static struct clk_onecell_data clk_data;
imx6sl_enable_pll_arm(false);
}
+static struct clk ** const uart_clks[] __initconst = {
+ &clks[IMX6SL_CLK_UART],
+ &clks[IMX6SL_CLK_UART_SERIAL],
+ NULL
+};
+
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14);
+ clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif0_podf", base + 0x7c, 14, &share_count_spdif);
+ clks[IMX6SL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
clks[IMX6SL_CLK_PLL2_PFD2]);
+
+ imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
static u32 share_count_ssi2;
static u32 share_count_ssi3;
+static struct clk ** const uart_clks[] __initconst = {
+ &clks[IMX6SX_CLK_UART_IPG],
+ &clks[IMX6SX_CLK_UART_SERIAL],
+ NULL
+};
+
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+
+ imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ /*
+ * Lower the AHB clock rate before changing the parent clock source,
+ * as AHB clock rate can NOT be higher than 133MHz, but its parent
+ * will be switched from 396MHz PFD to 528MHz PLL in order to increase
+ * AXI clock rate, so we need to lower AHB rate first to make sure at
+ * any time, AHB rate is <= 133MHz.
+ */
+ clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
+
+ /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
+ clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+ clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
+ clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
+ clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);
+
+ /* Make sure AHB rate is 132MHz */
+ clk_set_rate(clks[IMX6UL_CLK_AHB], 132000000);
+
/* set perclk to from OSC */
clk_set_parent(clks[IMX6UL_CLK_PERCLK_SEL], clks[IMX6UL_CLK_OSC]);
static struct clk_onecell_data clk_data;
+static struct clk ** const uart_clks[] __initconst = {
+ &clks[IMX7D_UART1_ROOT_CLK],
+ &clks[IMX7D_UART2_ROOT_CLK],
+ &clks[IMX7D_UART3_ROOT_CLK],
+ &clks[IMX7D_UART4_ROOT_CLK],
+ &clks[IMX7D_UART5_ROOT_CLK],
+ &clks[IMX7D_UART6_ROOT_CLK],
+ &clks[IMX7D_UART7_ROOT_CLK],
+ NULL
+};
+
static void __init imx7d_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate2("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate2("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate2("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
+ clks[IMX7D_ADC_ROOT_CLK] = imx_clk_gate2("adc_root_clk", "ipg_root_clk", base + 0x4200, 0);
clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
/* set uart module clock's parent clock source that must be great then 80MHz */
clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
+ imx_register_uart_clocks(uart_clks);
+
}
CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24);
+ clk[VF610_CLK_OCOTP] = imx_clk_gate("ocotp", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(5));
imx_check_clocks(clk, ARRAY_SIZE(clk));
*val ^= CSCMR1_FIXUP;
return;
}
+
+static int imx_keep_uart_clocks __initdata;
+static struct clk ** const *imx_uart_clocks __initdata;
+
+static int __init imx_keep_uart_clocks_param(char *str)
+{
+ imx_keep_uart_clocks = 1;
+
+ return 0;
+}
+__setup_param("earlycon", imx_keep_uart_earlycon,
+ imx_keep_uart_clocks_param, 0);
+__setup_param("earlyprintk", imx_keep_uart_earlyprintk,
+ imx_keep_uart_clocks_param, 0);
+
+void __init imx_register_uart_clocks(struct clk ** const clks[])
+{
+ if (imx_keep_uart_clocks) {
+ int i;
+
+ imx_uart_clocks = clks;
+ for (i = 0; imx_uart_clocks[i]; i++)
+ clk_prepare_enable(*imx_uart_clocks[i]);
+ }
+}
+
+static int __init imx_clk_disable_uart(void)
+{
+ if (imx_keep_uart_clocks && imx_uart_clocks) {
+ int i;
+
+ for (i = 0; imx_uart_clocks[i]; i++)
+ clk_disable_unprepare(*imx_uart_clocks[i]);
+ }
+
+ return 0;
+}
+late_initcall_sync(imx_clk_disable_uart);
extern spinlock_t imx_ccm_lock;
void imx_check_clocks(struct clk *clks[], unsigned int count);
+void imx_register_uart_clocks(struct clk ** const clks[]);
extern void imx_cscmr1_fixup(u32 *val);
for_each_node_by_type(dn, "cpu") {
struct clk_init_data init;
struct clk *clk;
+ struct clk *parent_clk;
char *clk_name = kzalloc(5, GFP_KERNEL);
int cpu, err;
goto bail_out;
sprintf(clk_name, "cpu%d", cpu);
+ parent_clk = of_clk_get(node, 0);
- cpuclk[cpu].parent_name = of_clk_get_parent_name(node, 0);
+ cpuclk[cpu].parent_name = __clk_get_name(parent_clk);
cpuclk[cpu].clk_name = clk_name;
cpuclk[cpu].cpu = cpu;
cpuclk[cpu].reg_base = clock_complex_base;
* the values for DIV_COPY and DIV_HPM dividers need not be set.
*/
div0 = cfg_data->div0;
- if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_HAS_DIV1) {
div1 = cfg_data->div1;
if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK)
div1 = readl(base + E4210_DIV_CPU1) &
alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1;
WARN_ON(alt_div >= MAX_DIV);
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
/*
* In Exynos4210, ATB clock parent is also mout_core. So
* ATB clock also needs to be mantained at safe speed.
writel(div0, base + E4210_DIV_CPU0);
wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
- if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_HAS_DIV1) {
writel(div1, base + E4210_DIV_CPU1);
wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
DIV_MASK_ALL);
unsigned long mux_reg;
/* find out the divider values to use for clock data */
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
while ((cfg_data->prate * 1000) != ndata->new_rate) {
if (cfg_data->prate == 0)
return -EINVAL;
writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK);
div_mask |= E4210_DIV0_ATB_MASK;
}
PNAME(mout_bpll_user_p) = { "fin_pll", "mout_bpll" };
PNAME(mout_aclk166_p) = { "mout_cpll", "mout_mpll_user" };
PNAME(mout_aclk200_p) = { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk300_p) = { "mout_aclk300_disp1_mid",
+ "mout_aclk300_disp1_mid1" };
PNAME(mout_aclk400_p) = { "mout_aclk400_g3d_mid", "mout_gpll" };
PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
+PNAME(mout_aclk300_sub_p) = { "fin_pll", "div_aclk300_disp" };
+PNAME(mout_aclk300_disp1_mid1_p) = { "mout_vpll", "mout_cpll" };
PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" };
*/
MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
+ MUX(0, "mout_aclk300_disp1_mid", mout_aclk200_p, SRC_TOP0, 14, 1),
+ MUX(0, "mout_aclk300", mout_aclk300_p, SRC_TOP0, 15, 1),
MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
+ MUX(0, "mout_aclk300_disp1_mid1", mout_aclk300_disp1_mid1_p, SRC_TOP1,
+ 8, 1),
MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
- MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
+ MUX(CLK_MOUT_ACLK200_DISP1_SUB, "mout_aclk200_disp1_sub",
+ mout_aclk200_sub_p, SRC_TOP3, 4, 1),
+ MUX(CLK_MOUT_ACLK300_DISP1_SUB, "mout_aclk300_disp1_sub",
+ mout_aclk300_sub_p, SRC_TOP3, 6, 1),
MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
24, 3),
+ DIV(0, "div_aclk300_disp", "mout_aclk300", DIV_TOP0, 28, 3),
DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
"renesas,cpg-mstp-clocks"))
goto found;
+ /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock */
+ if (!strcmp(clkspec.np->name, "zb_clk"))
+ goto found;
+
of_node_put(clkspec.np);
i++;
}
#
obj-y += clk-sunxi.o clk-factors.o
+obj-y += clk-a10-codec.o
obj-y += clk-a10-hosc.o
+obj-y += clk-a10-mod1.o
+obj-y += clk-a10-pll2.o
obj-y += clk-a20-gmac.o
obj-y += clk-mod0.o
obj-y += clk-simple-gates.o
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SUN4I_CODEC_GATE 31
+
+static void __init sun4i_codec_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name, *parent_name;
+ void __iomem *reg;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg))
+ return;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ parent_name = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent_name,
+ CLK_SET_RATE_PARENT, reg,
+ SUN4I_CODEC_GATE, 0, NULL);
+
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(sun4i_codec, "allwinner,sun4i-a10-codec-clk",
+ sun4i_codec_clk_setup);
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+static DEFINE_SPINLOCK(mod1_lock);
+
+#define SUN4I_MOD1_ENABLE 31
+#define SUN4I_MOD1_MUX 16
+#define SUN4I_MOD1_MUX_WIDTH 2
+#define SUN4I_MOD1_MAX_PARENTS 4
+
+static void __init sun4i_mod1_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_mux *mux;
+ struct clk_gate *gate;
+ const char *parents[4];
+ const char *clk_name = node->name;
+ void __iomem *reg;
+ int i;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg))
+ return;
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ goto err_unmap;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ goto err_free_mux;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ i = of_clk_parent_fill(node, parents, SUN4I_MOD1_MAX_PARENTS);
+
+ gate->reg = reg;
+ gate->bit_idx = SUN4I_MOD1_ENABLE;
+ gate->lock = &mod1_lock;
+ mux->reg = reg;
+ mux->shift = SUN4I_MOD1_MUX;
+ mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1;
+ mux->lock = &mod1_lock;
+
+ clk = clk_register_composite(NULL, clk_name, parents, i,
+ &mux->hw, &clk_mux_ops,
+ NULL, NULL,
+ &gate->hw, &clk_gate_ops, 0);
+ if (IS_ERR(clk))
+ goto err_free_gate;
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+ return;
+
+err_free_gate:
+ kfree(gate);
+err_free_mux:
+ kfree(mux);
+err_unmap:
+ iounmap(reg);
+}
+CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk",
+ sun4i_mod1_clk_setup);
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * Copyright 2015 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+#define SUN4I_PLL2_ENABLE 31
+
+#define SUN4I_PLL2_PRE_DIV_SHIFT 0
+#define SUN4I_PLL2_PRE_DIV_WIDTH 5
+#define SUN4I_PLL2_PRE_DIV_MASK GENMASK(SUN4I_PLL2_PRE_DIV_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_N_SHIFT 8
+#define SUN4I_PLL2_N_WIDTH 7
+#define SUN4I_PLL2_N_MASK GENMASK(SUN4I_PLL2_N_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_POST_DIV_SHIFT 26
+#define SUN4I_PLL2_POST_DIV_WIDTH 4
+#define SUN4I_PLL2_POST_DIV_MASK GENMASK(SUN4I_PLL2_POST_DIV_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_POST_DIV_VALUE 4
+
+#define SUN4I_PLL2_OUTPUTS 4
+
+struct sun4i_pll2_data {
+ u32 post_div_offset;
+ u32 pre_div_flags;
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+
+static void __init sun4i_pll2_setup(struct device_node *node,
+ struct sun4i_pll2_data *data)
+{
+ const char *clk_name = node->name, *parent;
+ struct clk **clks, *base_clk, *prediv_clk;
+ struct clk_onecell_data *clk_data;
+ struct clk_multiplier *mult;
+ struct clk_gate *gate;
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg))
+ return;
+
+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ goto err_unmap;
+
+ clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL);
+ if (!clks)
+ goto err_free_data;
+
+ parent = of_clk_get_parent_name(node, 0);
+ prediv_clk = clk_register_divider(NULL, "pll2-prediv",
+ parent, 0, reg,
+ SUN4I_PLL2_PRE_DIV_SHIFT,
+ SUN4I_PLL2_PRE_DIV_WIDTH,
+ data->pre_div_flags,
+ &sun4i_a10_pll2_lock);
+ if (!prediv_clk) {
+ pr_err("Couldn't register the prediv clock\n");
+ goto err_free_array;
+ }
+
+ /* Setup the gate part of the PLL2 */
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate)
+ goto err_unregister_prediv;
+
+ gate->reg = reg;
+ gate->bit_idx = SUN4I_PLL2_ENABLE;
+ gate->lock = &sun4i_a10_pll2_lock;
+
+ /* Setup the multiplier part of the PLL2 */
+ mult = kzalloc(sizeof(struct clk_multiplier), GFP_KERNEL);
+ if (!mult)
+ goto err_free_gate;
+
+ mult->reg = reg;
+ mult->shift = SUN4I_PLL2_N_SHIFT;
+ mult->width = 7;
+ mult->flags = CLK_MULTIPLIER_ZERO_BYPASS |
+ CLK_MULTIPLIER_ROUND_CLOSEST;
+ mult->lock = &sun4i_a10_pll2_lock;
+
+ parent = __clk_get_name(prediv_clk);
+ base_clk = clk_register_composite(NULL, "pll2-base",
+ &parent, 1,
+ NULL, NULL,
+ &mult->hw, &clk_multiplier_ops,
+ &gate->hw, &clk_gate_ops,
+ CLK_SET_RATE_PARENT);
+ if (!base_clk) {
+ pr_err("Couldn't register the base multiplier clock\n");
+ goto err_free_multiplier;
+ }
+
+ parent = __clk_get_name(base_clk);
+
+ /*
+ * PLL2-1x
+ *
+ * This is supposed to have a post divider, but we won't need
+ * to use it, we just need to initialise it to 4, and use a
+ * fixed divider.
+ */
+ val = readl(reg);
+ val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+ val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ writel(val, reg);
+
+ of_property_read_string_index(node, "clock-output-names",
+ SUN4I_A10_PLL2_1X, &clk_name);
+ clks[SUN4I_A10_PLL2_1X] = clk_register_fixed_factor(NULL, clk_name,
+ parent,
+ CLK_SET_RATE_PARENT,
+ 1,
+ SUN4I_PLL2_POST_DIV_VALUE);
+ WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_1X]));
+
+ /*
+ * PLL2-2x
+ *
+ * This clock doesn't use the post divider, and really is just
+ * a fixed divider from the PLL2 base clock.
+ */
+ of_property_read_string_index(node, "clock-output-names",
+ SUN4I_A10_PLL2_2X, &clk_name);
+ clks[SUN4I_A10_PLL2_2X] = clk_register_fixed_factor(NULL, clk_name,
+ parent,
+ CLK_SET_RATE_PARENT,
+ 1, 2);
+ WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_2X]));
+
+ /* PLL2-4x */
+ of_property_read_string_index(node, "clock-output-names",
+ SUN4I_A10_PLL2_4X, &clk_name);
+ clks[SUN4I_A10_PLL2_4X] = clk_register_fixed_factor(NULL, clk_name,
+ parent,
+ CLK_SET_RATE_PARENT,
+ 1, 1);
+ WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_4X]));
+
+ /* PLL2-8x */
+ of_property_read_string_index(node, "clock-output-names",
+ SUN4I_A10_PLL2_8X, &clk_name);
+ clks[SUN4I_A10_PLL2_8X] = clk_register_fixed_factor(NULL, clk_name,
+ parent,
+ CLK_SET_RATE_PARENT,
+ 2, 1);
+ WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_8X]));
+
+ clk_data->clks = clks;
+ clk_data->clk_num = SUN4I_PLL2_OUTPUTS;
+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return;
+
+err_free_multiplier:
+ kfree(mult);
+err_free_gate:
+ kfree(gate);
+err_unregister_prediv:
+ clk_unregister_divider(prediv_clk);
+err_free_array:
+ kfree(clks);
+err_free_data:
+ kfree(clk_data);
+err_unmap:
+ iounmap(reg);
+}
+
+static struct sun4i_pll2_data sun4i_a10_pll2_data = {
+ .pre_div_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+};
+
+static void __init sun4i_a10_pll2_setup(struct device_node *node)
+{
+ sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
+}
+
+CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
+ sun4i_a10_pll2_setup);
+
+static struct sun4i_pll2_data sun5i_a13_pll2_data = {
+ .post_div_offset = 1,
+};
+
+static void __init sun5i_a13_pll2_setup(struct device_node *node)
+{
+ sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
+}
+
+CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
+ sun5i_a13_pll2_setup);
sunxi_simple_gates_init);
CLK_OF_DECLARE(sun8i_a23_apb2, "allwinner,sun8i-a23-apb2-gates-clk",
sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a33_ahb1, "allwinner,sun8i-a33-ahb1-gates-clk",
+ sunxi_simple_gates_init);
CLK_OF_DECLARE(sun9i_a80_ahb0, "allwinner,sun9i-a80-ahb0-gates-clk",
sunxi_simple_gates_init);
CLK_OF_DECLARE(sun9i_a80_ahb1, "allwinner,sun9i-a80-ahb1-gates-clk",
}
CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks);
CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks);
+CLK_OF_DECLARE(sun5i_r8_clk_init, "allwinner,sun5i-r8", sun5i_init_clocks);
CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks);
static const char *sun6i_critical_clocks[] __initdata = {
return (u64)dvco_rate * (scale_bits + 1) / DFLL_FREQ_REQ_SCALE_MAX;
}
-/*
- * Monitor control
- */
-
-/**
- * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq
- * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield
- * @ref_rate: DFLL reference clock rate
- *
- * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles
- * per second. Returns the converted value.
- */
-static u64 dfll_calc_monitored_rate(u32 monitor_data,
- unsigned long ref_rate)
-{
- return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE);
-}
-
-/**
- * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor
- * @td: DFLL instance
- *
- * If the DFLL is enabled, return the last rate reported by the DFLL's
- * internal monitoring hardware. This works in both open-loop and
- * closed-loop mode, and takes the output scaler setting into account.
- * Assumes that the monitor was programmed to monitor frequency before
- * the sample period started. If the driver believes that the DFLL is
- * currently uninitialized or disabled, it will return 0, since
- * otherwise the DFLL monitor data register will return the last
- * measured rate from when the DFLL was active.
- */
-static u64 dfll_read_monitor_rate(struct tegra_dfll *td)
-{
- u32 v, s;
- u64 pre_scaler_rate, post_scaler_rate;
-
- if (!dfll_is_running(td))
- return 0;
-
- v = dfll_readl(td, DFLL_MONITOR_DATA);
- v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT;
- pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate);
-
- s = dfll_readl(td, DFLL_FREQ_REQ);
- s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT;
- post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate);
-
- return post_scaler_rate;
-}
-
/*
* DFLL mode switching
*/
return td->last_unrounded_rate;
}
-static long dfll_clk_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *parent_rate)
+/* Must use determine_rate since it allows for rates exceeding 2^31-1 */
+static int dfll_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *clk_req)
{
struct tegra_dfll *td = clk_hw_to_dfll(hw);
struct dfll_rate_req req;
int ret;
- ret = dfll_calculate_rate_request(td, &req, rate);
+ ret = dfll_calculate_rate_request(td, &req, clk_req->rate);
if (ret)
return ret;
/*
- * Don't return the rounded rate, since it doesn't really matter as
+ * Don't set the rounded rate, since it doesn't really matter as
* the output rate will be voltage controlled anyway, and cpufreq
* freaks out if any rounding happens.
*/
- return rate;
+
+ return 0;
}
static int dfll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
.enable = dfll_clk_enable,
.disable = dfll_clk_disable,
.recalc_rate = dfll_clk_recalc_rate,
- .round_rate = dfll_clk_round_rate,
+ .determine_rate = dfll_clk_determine_rate,
.set_rate = dfll_clk_set_rate,
};
*/
#ifdef CONFIG_DEBUG_FS
+/*
+ * Monitor control
+ */
+
+/**
+ * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq
+ * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield
+ * @ref_rate: DFLL reference clock rate
+ *
+ * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles
+ * per second. Returns the converted value.
+ */
+static u64 dfll_calc_monitored_rate(u32 monitor_data,
+ unsigned long ref_rate)
+{
+ return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE);
+}
+
+/**
+ * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor
+ * @td: DFLL instance
+ *
+ * If the DFLL is enabled, return the last rate reported by the DFLL's
+ * internal monitoring hardware. This works in both open-loop and
+ * closed-loop mode, and takes the output scaler setting into account.
+ * Assumes that the monitor was programmed to monitor frequency before
+ * the sample period started. If the driver believes that the DFLL is
+ * currently uninitialized or disabled, it will return 0, since
+ * otherwise the DFLL monitor data register will return the last
+ * measured rate from when the DFLL was active.
+ */
+static u64 dfll_read_monitor_rate(struct tegra_dfll *td)
+{
+ u32 v, s;
+ u64 pre_scaler_rate, post_scaler_rate;
+
+ if (!dfll_is_running(td))
+ return 0;
+
+ v = dfll_readl(td, DFLL_MONITOR_DATA);
+ v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT;
+ pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate);
+
+ s = dfll_readl(td, DFLL_FREQ_REQ);
+ s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT;
+ post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate);
+
+ return post_scaler_rate;
+}
static int attr_enable_get(void *data, u64 *val)
{
void __init tegra_audio_clk_init(void __iomem *clk_base,
void __iomem *pmc_base, struct tegra_clk *tegra_clks,
- struct tegra_clk_pll_params *pll_a_params)
+ struct tegra_audio_clk_info *audio_info,
+ unsigned int num_plls)
{
struct clk *clk;
struct clk **dt_clk;
int i;
- /* PLLA */
- dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a, tegra_clks);
- if (dt_clk) {
- clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base,
- pmc_base, 0, pll_a_params, NULL);
- *dt_clk = clk;
+ if (!audio_info || num_plls < 1) {
+ pr_err("No audio data passed to tegra_audio_clk_init\n");
+ WARN_ON(1);
+ return;
+ }
+
+ for (i = 0; i < num_plls; i++) {
+ struct tegra_audio_clk_info *info = &audio_info[i];
+
+ dt_clk = tegra_lookup_dt_id(info->clk_id, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_pll(info->name, info->parent,
+ clk_base, pmc_base, 0, info->pll_params,
+ NULL);
+ *dt_clk = clk;
+ }
}
/* PLLA_OUT0 */
[0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
};
+static struct tegra_audio_clk_info tegra114_audio_plls[] = {
+ { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" },
+};
+
static struct clk **clks;
static unsigned long osc_freq;
tegra114_fixed_clk_init(clk_base);
tegra114_pll_init(clk_base, pmc_base);
tegra114_periph_clk_init(clk_base, pmc_base);
- tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks, &pll_a_params);
+ tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks,
+ tegra114_audio_plls,
+ ARRAY_SIZE(tegra114_audio_plls));
tegra_pmc_clk_init(pmc_base, tegra114_clks);
tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks,
&pll_x_params);
{TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0},
};
+static struct tegra_audio_clk_info tegra124_audio_plls[] = {
+ { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" },
+};
+
/**
* tegra124_clock_apply_init_table - initialize clocks on Tegra124 SoCs
*
tegra_fixed_clk_init(tegra124_clks);
tegra124_pll_init(clk_base, pmc_base);
tegra124_periph_clk_init(clk_base, pmc_base);
- tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, &pll_a_params);
+ tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks,
+ tegra124_audio_plls,
+ ARRAY_SIZE(tegra124_audio_plls));
tegra_pmc_clk_init(pmc_base, tegra124_clks);
/* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */
{},
};
+static struct tegra_audio_clk_info tegra30_audio_plls[] = {
+ { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" },
+};
+
static void __init tegra30_clock_init(struct device_node *np)
{
struct device_node *node;
tegra30_pll_init();
tegra30_super_clk_init();
tegra30_periph_clk_init();
- tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks, &pll_a_params);
+ tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks,
+ tegra30_audio_plls,
+ ARRAY_SIZE(tegra30_audio_plls));
tegra_pmc_clk_init(pmc_base, tegra30_clks);
tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
};
/**
- * struct clk_pll_params - PLL parameters
+ * struct tegra_clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
* @input_max: Maximum input frequency
* @base_reg: PLL base reg offset
* @misc_reg: PLL misc reg offset
* @lock_reg: PLL lock reg offset
- * @lock_bit_idx: Bit index for PLL lock status
+ * @lock_mask: Bitmask for PLL lock status
* @lock_enable_bit_idx: Bit index to enable PLL lock
+ * @iddq_reg: PLL IDDQ register offset
+ * @iddq_bit_idx: Bit index to enable PLL IDDQ
+ * @aux_reg: AUX register offset
+ * @dyn_ramp_reg: Dynamic ramp control register offset
+ * @ext_misc_reg: Miscellaneous control register offsets
+ * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM)
+ * @pmc_divp_reg: p divider PMC override register offset (PLLM)
+ * @flags: PLL flags
+ * @stepa_shift: Dynamic ramp step A field shift
+ * @stepb_shift: Dynamic ramp step B field shift
* @lock_delay: Delay in us if PLL lock is not used
+ * @max_p: maximum value for the p divider
+ * @pdiv_tohw: mapping of p divider to register values
+ * @div_nmp: offsets and widths on n, m and p fields
+ * @freq_table: array of frequencies supported by PLL
+ * @fixed_rate: PLL rate if it is fixed
+ *
+ * Flags:
+ * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
+ * PLL locking. If not set it will use lock_delay value to wait.
+ * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
+ * that it is PLLU and invert post divider value.
+ * TEGRA_PLLM - PLLM has additional override settings in PMC. This
+ * flag indicates that it is PLLM and use override settings.
+ * TEGRA_PLL_FIXED - We are not supposed to change output frequency
+ * of some plls.
+ * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
+ * base register.
+ * TEGRA_PLL_BYPASS - PLL has bypass bit
+ * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
*/
struct tegra_clk_pll_params {
unsigned long input_min;
unsigned long fixed_rate;
};
+#define TEGRA_PLL_USE_LOCK BIT(0)
+#define TEGRA_PLL_HAS_CPCON BIT(1)
+#define TEGRA_PLL_SET_LFCON BIT(2)
+#define TEGRA_PLL_SET_DCCON BIT(3)
+#define TEGRA_PLLU BIT(4)
+#define TEGRA_PLLM BIT(5)
+#define TEGRA_PLL_FIXED BIT(6)
+#define TEGRA_PLLE_CONFIGURE BIT(7)
+#define TEGRA_PLL_LOCK_MISC BIT(8)
+#define TEGRA_PLL_BYPASS BIT(9)
+#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
+
/**
* struct tegra_clk_pll - Tegra PLL clock
*
* @hw: handle between common and hardware-specifix interfaces
* @clk_base: address of CAR controller
* @pmc: address of PMC, required to read override bits
- * @freq_table: array of frequencies supported by PLL
- * @params: PLL parameters
- * @flags: PLL flags
- * @fixed_rate: PLL rate if it is fixed
* @lock: register lock
- *
- * Flags:
- * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
- * PLL locking. If not set it will use lock_delay value to wait.
- * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
- * that it is PLLU and invert post divider value.
- * TEGRA_PLLM - PLLM has additional override settings in PMC. This
- * flag indicates that it is PLLM and use override settings.
- * TEGRA_PLL_FIXED - We are not supposed to change output frequency
- * of some plls.
- * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
- * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
- * base register.
- * TEGRA_PLL_BYPASS - PLL has bypass bit
- * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
+ * @params: PLL parameters
*/
struct tegra_clk_pll {
struct clk_hw hw;
#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
-#define TEGRA_PLL_USE_LOCK BIT(0)
-#define TEGRA_PLL_HAS_CPCON BIT(1)
-#define TEGRA_PLL_SET_LFCON BIT(2)
-#define TEGRA_PLL_SET_DCCON BIT(3)
-#define TEGRA_PLLU BIT(4)
-#define TEGRA_PLLM BIT(5)
-#define TEGRA_PLL_FIXED BIT(6)
-#define TEGRA_PLLE_CONFIGURE BIT(7)
-#define TEGRA_PLL_LOCK_MISC BIT(8)
-#define TEGRA_PLL_BYPASS BIT(9)
-#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
+/**
+ * struct tegra_audio_clk_info - Tegra Audio Clk Information
+ *
+ * @name: name for the audio pll
+ * @pll_params: pll_params for audio pll
+ * @clk_id: clk_ids for the audio pll
+ * @parent: name of the parent of the audio pll
+ */
+struct tegra_audio_clk_info {
+ char *name;
+ struct tegra_clk_pll_params *pll_params;
+ int clk_id;
+ char *parent;
+};
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
void tegra_audio_clk_init(void __iomem *clk_base,
void __iomem *pmc_base, struct tegra_clk *tegra_clks,
- struct tegra_clk_pll_params *pll_params);
+ struct tegra_audio_clk_info *audio_info,
+ unsigned int num_plls);
void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
struct tegra_clk *tegra_clks,
if (!table->freq || (table->freq > max_freq))
break;
- /*
- * FIXME after clk_round_rate/clk_determine_rate prototypes
- * have been updated
- */
- if (table->freq & (1<<31))
- continue;
-
dfll_mv = get_cvb_voltage(
speedo_value, d->speedo_scale, &table->coefficients);
dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align);
DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
DT_CLK(NULL, "uart3_ick", "uart3_ick"),
- DT_CLK(NULL, "uart4_ick", "uart4_ick"),
DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
static struct ti_dt_clk omap36xx_clks[] = {
DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"),
DT_CLK(NULL, "uart4_fck", "uart4_fck"),
+ DT_CLK(NULL, "uart4_ick", "uart4_ick"),
{ .node_name = NULL },
};
#include "clock.h"
-#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
int __init dra7xx_dt_clk_init(void)
{
int rc;
- struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck;
+ struct clk *dpll_ck, *hdcp_ck;
ti_dt_clocks_register(dra7xx_clks);
omap2_clk_disable_autoidle_all();
- abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux");
- sys_clkin2 = clk_get_sys(NULL, "sys_clkin2");
- dpll_ck = clk_get_sys(NULL, "dpll_abe_ck");
-
- rc = clk_set_parent(abe_dpll_mux, sys_clkin2);
- if (!rc)
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ);
- if (rc)
- pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-
- dpll_ck = clk_get_sys(NULL, "dpll_abe_m2x2_ck");
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ * 2);
- if (rc)
- pr_err("%s: failed to configure ABE DPLL m2x2!\n", __func__);
-
dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
if (rc)
}
}
- if (unlikely(!clk->enable_reg)) {
+ if (unlikely(IS_ERR(clk->enable_reg))) {
pr_err("%s: %s missing enable_reg\n", __func__,
clk_hw_get_name(hw));
ret = -EINVAL;
u32 v;
clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
+ if (IS_ERR(clk->enable_reg)) {
/*
* 'independent' here refers to a clock which is not
* controlled by its parent.
bool
select CLKSRC_OF
+config CLKSRC_TI_32K
+ bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select CLKSRC_OF if OF
+ help
+ This option enables support for Texas Instruments 32.768 Hz clocksource
+ available on many OMAP-like platforms.
+
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
+obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
* different to the 32-bit upper value read previously, go back to step 2.
* Otherwise the 64-bit timer counter value is correct.
*/
-static u64 gt_counter_read(void)
+static u64 notrace _gt_counter_read(void)
{
u64 counter;
u32 lower;
return counter;
}
+static u64 gt_counter_read(void)
+{
+ return _gt_counter_read();
+}
+
/**
* To ensure that updates to comparator value register do not set the
* Interrupt Status Register proceed as follows:
#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
static u64 notrace gt_sched_clock_read(void)
{
- return gt_counter_read();
+ return _gt_counter_read();
}
#endif
ftm_writel(0x00, base + FTM_CNT);
}
-static u64 ftm_read_sched_clock(void)
+static u64 notrace ftm_read_sched_clock(void)
{
return ftm_readl(priv->clksrc_base + FTM_CNT);
}
dev_warn(&p->pdev->dev, "delta out of range\n");
now = timer8_get_counter(p);
p->tcora = delta;
- ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCR) & ~0x40, p->mapbase + _8TCR);
if (delta > now)
ctrl_outw(delta, p->mapbase + TCORA);
else
ctrl_outw(now + 1, p->mapbase + TCORA);
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
raw_spin_unlock_irqrestore(&p->lock, flags);
}
raw_spin_lock_irqsave(&p->lock, flags);
ctrl_outw(0x0000, p->mapbase + _8TCR);
+ ctrl_outw(0x0000, p->mapbase + _8TCNT);
raw_spin_unlock_irqrestore(&p->lock, flags);
}
ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
-
timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
}
}
static struct clocksource gic_clocksource = {
- .name = "GIC",
- .read = gic_hpt_read,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .name = "GIC",
+ .read = gic_hpt_read,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC },
};
static void __init __gic_clocksource_init(void)
samsung_time_start(pwm.source_id, true);
}
-static cycle_t samsung_clocksource_read(struct clocksource *c)
+static cycle_t notrace samsung_clocksource_read(struct clocksource *c)
{
return ~readl_relaxed(pwm.source_reg);
}
{
struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
- sh_mtu2_disable(ch);
+ if (clockevent_state_periodic(ced))
+ sh_mtu2_disable(ch);
+
return 0;
}
struct clk *t2_clk = tc->clk[2];
int irq = tc->irq[2];
+ ret = clk_prepare_enable(tc->slow_clk);
+ if (ret)
+ return ret;
+
/* try to enable t2 clk to avoid future errors in mode change */
ret = clk_prepare_enable(t2_clk);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(tc->slow_clk);
return ret;
+ }
+
clk_disable(t2_clk);
clkevt.regs = tc->regs;
ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
if (ret) {
- clk_disable_unprepare(t2_clk);
+ clk_unprepare(t2_clk);
+ clk_disable_unprepare(tc->slow_clk);
return ret;
}
writel(value, base + 0x20 * gpt_id + offset);
}
-static cycle_t pistachio_clocksource_read_cycles(struct clocksource *cs)
+static cycle_t notrace
+pistachio_clocksource_read_cycles(struct clocksource *cs)
{
struct pistachio_clocksource *pcs = to_pistachio_clocksource(cs);
u32 counter, overflw;
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <linux/mfd/syscon.h>
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;
-
-#define AT91_SLOW_CLOCK 32768
-#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
+static int timer_latch;
/*
* The ST_CRTR is updated asynchronously to the master clock ... but
if (sr & AT91_ST_PITS) {
u32 crtr = read_CRTR();
- while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
- last_crtr += RM9200_TIMER_LATCH;
+ while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) {
+ last_crtr += timer_latch;
clkevt.event_handler(&clkevt);
}
return IRQ_HANDLED;
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
- regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
+ regmap_write(regmap_st, AT91_ST_PIMR, timer_latch);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
return 0;
}
*/
static void __init atmel_st_timer_init(struct device_node *node)
{
- unsigned int val;
+ struct clk *sclk;
+ unsigned int sclk_rate, val;
int irq, ret;
regmap_st = syscon_node_to_regmap(node);
if (ret)
panic(pr_fmt("Unable to setup IRQ\n"));
+ sclk = of_clk_get(node, 0);
+ if (IS_ERR(sclk))
+ panic(pr_fmt("Unable to get slow clock\n"));
+
+ clk_prepare_enable(sclk);
+ if (ret)
+ panic(pr_fmt("Could not enable slow clock\n"));
+
+ sclk_rate = clk_get_rate(sclk);
+ if (!sclk_rate)
+ panic(pr_fmt("Invalid slow clock rate\n"));
+ timer_latch = (sclk_rate + HZ / 2) / HZ;
+
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
* its prescaler from the 1 Hz default.
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+ clockevents_config_and_register(&clkevt, sclk_rate,
2, AT91_ST_ALMV);
/* register clocksource */
- clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
+ clocksource_register_hz(&clk32k, sclk_rate);
}
CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
atmel_st_timer_init);
return IRQ_HANDLED;
}
-static u64 digicolor_timer_sched_read(void)
+static u64 notrace digicolor_timer_sched_read(void)
{
return ~readl(dc_timer_dev.base + COUNT(TIMER_B));
}
}
/* read 64-bit timer counter */
-static cycle_t sirfsoc_timer_read(struct clocksource *cs)
+static cycle_t notrace sirfsoc_timer_read(struct clocksource *cs)
{
u64 cycles;
--- /dev/null
+/**
+ * timer-ti-32k.c - OMAP2 32k Timer Support
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ * Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched_clock.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510. Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP2_32KSYNCNT_REV_OFF 0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
+
+struct ti_32k {
+ void __iomem *base;
+ void __iomem *counter;
+ struct clocksource cs;
+};
+
+static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
+{
+ return container_of(cs, struct ti_32k, cs);
+}
+
+static cycle_t ti_32k_read_cycles(struct clocksource *cs)
+{
+ struct ti_32k *ti = to_ti_32k(cs);
+
+ return (cycle_t)readl_relaxed(ti->counter);
+}
+
+static struct ti_32k ti_32k_timer = {
+ .cs = {
+ .name = "32k_counter",
+ .rating = 250,
+ .read = ti_32k_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS |
+ CLOCK_SOURCE_SUSPEND_NONSTOP,
+ },
+};
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+ return ti_32k_read_cycles(&ti_32k_timer.cs);
+}
+
+static void __init ti_32k_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ti_32k_timer.base = of_iomap(np, 0);
+ if (!ti_32k_timer.base) {
+ pr_err("Can't ioremap 32k timer base\n");
+ return;
+ }
+
+ ti_32k_timer.counter = ti_32k_timer.base;
+
+ /*
+ * 32k sync Counter IP register offsets vary between the highlander
+ * version and the legacy ones.
+ *
+ * The 'SCHEME' bits(30-31) of the revision register is used to identify
+ * the version.
+ */
+ if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
+ OMAP2_32KSYNCNT_REV_SCHEME)
+ ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
+ else
+ ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+ ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
+ if (ret) {
+ pr_err("32k_counter: can't register clocksource\n");
+ return;
+ }
+
+ sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+ pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+}
+CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
+ ti_32k_timer_init);
__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
}
-static u64 pit_read_sched_clock(void)
+static u64 notrace pit_read_sched_clock(void)
{
return ~__raw_readl(clksrc_base + PITCVAL);
}
config ARM_SA1110_CPUFREQ
bool
+config ARM_SCPI_CPUFREQ
+ tristate "SCPI based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+ help
+ This adds the CPUfreq driver support for ARM big.LITTLE platforms
+ using SCPI protocol for CPU power management.
+
+ This driver uses SCPI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
+obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
{
struct acpi_cpufreq_data *data = policy->driver_data;
+ if (unlikely(!data))
+ return -ENODEV;
+
return cpufreq_show_cpus(data->freqdomain_cpus, buf);
}
* since this is a core component, and is essential for the
* subsequent light-weight ->init() to succeed.
*/
- if (cpufreq_driver->exit)
+ if (cpufreq_driver->exit) {
cpufreq_driver->exit(policy);
+ policy->freq_table = NULL;
+ }
}
/**
local_irq_save(flags);
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
+ if (cpu->prev_mperf == mperf) {
+ local_irq_restore(flags);
+ return;
+ }
+
tsc = rdtsc();
local_irq_restore(flags);
.get = cpufreq_generic_get,
.init = s5pv210_cpu_init,
.name = "s5pv210",
-#ifdef CONFIG_PM
.suspend = cpufreq_generic_suspend,
.resume = cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */
-#endif
};
static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) based CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static struct scpi_ops *scpi_ops;
+
+static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
+{
+ u8 domain = topology_physical_package_id(cpu_dev->id);
+
+ if (domain < 0)
+ return ERR_PTR(-EINVAL);
+ return scpi_ops->dvfs_get_info(domain);
+}
+
+static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
+{
+ int idx, ret = 0;
+ struct scpi_opp *opp;
+ struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ if (!info->opps)
+ return -EIO;
+
+ for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
+ if (remove)
+ dev_pm_opp_remove(cpu_dev, opp->freq);
+ else
+ ret = dev_pm_opp_add(cpu_dev, opp->freq,
+ opp->m_volt * 1000);
+ if (ret) {
+ dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
+ opp->freq, opp->m_volt);
+ while (idx-- > 0)
+ dev_pm_opp_remove(cpu_dev, (--opp)->freq);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+static int scpi_get_transition_latency(struct device *cpu_dev)
+{
+ struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+ return info->latency;
+}
+
+static int scpi_init_opp_table(struct device *cpu_dev)
+{
+ return scpi_opp_table_ops(cpu_dev, false);
+}
+
+static void scpi_free_opp_table(struct device *cpu_dev)
+{
+ scpi_opp_table_ops(cpu_dev, true);
+}
+
+static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+ .name = "scpi",
+ .get_transition_latency = scpi_get_transition_latency,
+ .init_opp_table = scpi_init_opp_table,
+ .free_opp_table = scpi_free_opp_table,
+};
+
+static int scpi_cpufreq_probe(struct platform_device *pdev)
+{
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EIO;
+
+ return bL_cpufreq_register(&scpi_cpufreq_ops);
+}
+
+static int scpi_cpufreq_remove(struct platform_device *pdev)
+{
+ bL_cpufreq_unregister(&scpi_cpufreq_ops);
+ scpi_ops = NULL;
+ return 0;
+}
+
+static struct platform_driver scpi_cpufreq_platdrv = {
+ .driver = {
+ .name = "scpi-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = scpi_cpufreq_probe,
+ .remove = scpi_cpufreq_remove,
+};
+module_platform_driver(scpi_cpufreq_platdrv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
+MODULE_LICENSE("GPL v2");
#include <crypto/algapi.h>
#include <crypto/des.h>
-#include <asm/kmap_types.h>
-
//#define HIFN_DEBUG
#ifdef HIFN_DEBUG
if (err) {
put_device(&devfreq->dev);
mutex_unlock(&devfreq->lock);
- goto err_dev;
+ goto err_out;
}
mutex_unlock(&devfreq->lock);
err_init:
list_del(&devfreq->node);
device_unregister(&devfreq->dev);
-err_dev:
kfree(devfreq);
err_out:
return ERR_PTR(err);
ret = PTR_ERR(governor);
goto out;
}
- if (df->governor == governor)
+ if (df->governor == governor) {
+ ret = 0;
goto out;
+ }
if (df->governor) {
ret = df->governor->event_handler(df, DEVFREQ_GOV_STOP, NULL);
#include <linux/io.h>
#include "edac_core.h"
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#define I3200_REVISION "1.1"
#include <linux/pci_ids.h>
#include <linux/edac.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include "edac_core.h"
#define IE31200_REVISION "1.0"
#include <linux/pci_ids.h>
#include <linux/edac.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include "edac_core.h"
#define X38_REVISION "1.1"
config ARM_PSCI_FW
bool
+config ARM_SCPI_PROTOCOL
+ tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
+ depends on ARM_MHU
+ help
+ System Control and Power Interface (SCPI) Message Protocol is
+ defined for the purpose of communication between the Application
+ Cores(AP) and the System Control Processor(SCP). The MHU peripheral
+ provides a mechanism for inter-processor communication between SCP
+ and AP.
+
+ SCP controls most of the power managament on the Application
+ Processors. It offers control and management of: the core/cluster
+ power states, various power domain DVFS including the core/cluster,
+ certain system clocks configuration, thermal sensors and many
+ others.
+
+ This protocol library provides interface for all the client drivers
+ making use of the features offered by the SCP.
+
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
detect iSCSI boot parameters dynamically during system boot, say Y.
Otherwise, say N.
+config RASPBERRYPI_FIRMWARE
+ tristate "Raspberry Pi Firmware Driver"
+ depends on BCM2835_MBOX
+ help
+ This option enables support for communicating with the firmware on the
+ Raspberry Pi.
+
config QCOM_SCM
bool
depends on ARM || ARM64
# Makefile for the linux kernel.
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
+obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
-CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
obj-y += broadcom/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) Message Protocol driver
+ *
+ * SCPI Message Protocol is used between the System Control Processor(SCP)
+ * and the Application Processors(AP). The Message Handling Unit(MHU)
+ * provides a mechanism for inter-processor communication between SCP's
+ * Cortex M3 and AP.
+ *
+ * SCP offers control and management of the core/cluster power states,
+ * various power domain DVFS including the core/cluster, certain system
+ * clocks configuration, thermal sensors and many others.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/spinlock.h>
+
+#define CMD_ID_SHIFT 0
+#define CMD_ID_MASK 0x7f
+#define CMD_TOKEN_ID_SHIFT 8
+#define CMD_TOKEN_ID_MASK 0xff
+#define CMD_DATA_SIZE_SHIFT 16
+#define CMD_DATA_SIZE_MASK 0x1ff
+#define PACK_SCPI_CMD(cmd_id, tx_sz) \
+ ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
+ (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
+#define ADD_SCPI_TOKEN(cmd, token) \
+ ((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT))
+
+#define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK)
+#define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK)
+#define CMD_XTRACT_UNIQ(cmd) ((cmd) & CMD_UNIQ_MASK)
+
+#define SCPI_SLOT 0
+
+#define MAX_DVFS_DOMAINS 8
+#define MAX_DVFS_OPPS 8
+#define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16)
+#define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff)
+
+#define PROTOCOL_REV_MINOR_BITS 16
+#define PROTOCOL_REV_MINOR_MASK ((1U << PROTOCOL_REV_MINOR_BITS) - 1)
+#define PROTOCOL_REV_MAJOR(x) ((x) >> PROTOCOL_REV_MINOR_BITS)
+#define PROTOCOL_REV_MINOR(x) ((x) & PROTOCOL_REV_MINOR_MASK)
+
+#define FW_REV_MAJOR_BITS 24
+#define FW_REV_MINOR_BITS 16
+#define FW_REV_PATCH_MASK ((1U << FW_REV_MINOR_BITS) - 1)
+#define FW_REV_MINOR_MASK ((1U << FW_REV_MAJOR_BITS) - 1)
+#define FW_REV_MAJOR(x) ((x) >> FW_REV_MAJOR_BITS)
+#define FW_REV_MINOR(x) (((x) & FW_REV_MINOR_MASK) >> FW_REV_MINOR_BITS)
+#define FW_REV_PATCH(x) ((x) & FW_REV_PATCH_MASK)
+
+#define MAX_RX_TIMEOUT (msecs_to_jiffies(20))
+
+enum scpi_error_codes {
+ SCPI_SUCCESS = 0, /* Success */
+ SCPI_ERR_PARAM = 1, /* Invalid parameter(s) */
+ SCPI_ERR_ALIGN = 2, /* Invalid alignment */
+ SCPI_ERR_SIZE = 3, /* Invalid size */
+ SCPI_ERR_HANDLER = 4, /* Invalid handler/callback */
+ SCPI_ERR_ACCESS = 5, /* Invalid access/permission denied */
+ SCPI_ERR_RANGE = 6, /* Value out of range */
+ SCPI_ERR_TIMEOUT = 7, /* Timeout has occurred */
+ SCPI_ERR_NOMEM = 8, /* Invalid memory area or pointer */
+ SCPI_ERR_PWRSTATE = 9, /* Invalid power state */
+ SCPI_ERR_SUPPORT = 10, /* Not supported or disabled */
+ SCPI_ERR_DEVICE = 11, /* Device error */
+ SCPI_ERR_BUSY = 12, /* Device busy */
+ SCPI_ERR_MAX
+};
+
+enum scpi_std_cmd {
+ SCPI_CMD_INVALID = 0x00,
+ SCPI_CMD_SCPI_READY = 0x01,
+ SCPI_CMD_SCPI_CAPABILITIES = 0x02,
+ SCPI_CMD_SET_CSS_PWR_STATE = 0x03,
+ SCPI_CMD_GET_CSS_PWR_STATE = 0x04,
+ SCPI_CMD_SET_SYS_PWR_STATE = 0x05,
+ SCPI_CMD_SET_CPU_TIMER = 0x06,
+ SCPI_CMD_CANCEL_CPU_TIMER = 0x07,
+ SCPI_CMD_DVFS_CAPABILITIES = 0x08,
+ SCPI_CMD_GET_DVFS_INFO = 0x09,
+ SCPI_CMD_SET_DVFS = 0x0a,
+ SCPI_CMD_GET_DVFS = 0x0b,
+ SCPI_CMD_GET_DVFS_STAT = 0x0c,
+ SCPI_CMD_CLOCK_CAPABILITIES = 0x0d,
+ SCPI_CMD_GET_CLOCK_INFO = 0x0e,
+ SCPI_CMD_SET_CLOCK_VALUE = 0x0f,
+ SCPI_CMD_GET_CLOCK_VALUE = 0x10,
+ SCPI_CMD_PSU_CAPABILITIES = 0x11,
+ SCPI_CMD_GET_PSU_INFO = 0x12,
+ SCPI_CMD_SET_PSU = 0x13,
+ SCPI_CMD_GET_PSU = 0x14,
+ SCPI_CMD_SENSOR_CAPABILITIES = 0x15,
+ SCPI_CMD_SENSOR_INFO = 0x16,
+ SCPI_CMD_SENSOR_VALUE = 0x17,
+ SCPI_CMD_SENSOR_CFG_PERIODIC = 0x18,
+ SCPI_CMD_SENSOR_CFG_BOUNDS = 0x19,
+ SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1a,
+ SCPI_CMD_SET_DEVICE_PWR_STATE = 0x1b,
+ SCPI_CMD_GET_DEVICE_PWR_STATE = 0x1c,
+ SCPI_CMD_COUNT
+};
+
+struct scpi_xfer {
+ u32 slot; /* has to be first element */
+ u32 cmd;
+ u32 status;
+ const void *tx_buf;
+ void *rx_buf;
+ unsigned int tx_len;
+ unsigned int rx_len;
+ struct list_head node;
+ struct completion done;
+};
+
+struct scpi_chan {
+ struct mbox_client cl;
+ struct mbox_chan *chan;
+ void __iomem *tx_payload;
+ void __iomem *rx_payload;
+ struct list_head rx_pending;
+ struct list_head xfers_list;
+ struct scpi_xfer *xfers;
+ spinlock_t rx_lock; /* locking for the rx pending list */
+ struct mutex xfers_lock;
+ u8 token;
+};
+
+struct scpi_drvinfo {
+ u32 protocol_version;
+ u32 firmware_version;
+ int num_chans;
+ atomic_t next_chan;
+ struct scpi_ops *scpi_ops;
+ struct scpi_chan *channels;
+ struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
+};
+
+/*
+ * The SCP firmware only executes in little-endian mode, so any buffers
+ * shared through SCPI should have their contents converted to little-endian
+ */
+struct scpi_shared_mem {
+ __le32 command;
+ __le32 status;
+ u8 payload[0];
+} __packed;
+
+struct scp_capabilities {
+ __le32 protocol_version;
+ __le32 event_version;
+ __le32 platform_version;
+ __le32 commands[4];
+} __packed;
+
+struct clk_get_info {
+ __le16 id;
+ __le16 flags;
+ __le32 min_rate;
+ __le32 max_rate;
+ u8 name[20];
+} __packed;
+
+struct clk_get_value {
+ __le32 rate;
+} __packed;
+
+struct clk_set_value {
+ __le16 id;
+ __le16 reserved;
+ __le32 rate;
+} __packed;
+
+struct dvfs_info {
+ __le32 header;
+ struct {
+ __le32 freq;
+ __le32 m_volt;
+ } opps[MAX_DVFS_OPPS];
+} __packed;
+
+struct dvfs_get {
+ u8 index;
+} __packed;
+
+struct dvfs_set {
+ u8 domain;
+ u8 index;
+} __packed;
+
+struct sensor_capabilities {
+ __le16 sensors;
+} __packed;
+
+struct _scpi_sensor_info {
+ __le16 sensor_id;
+ u8 class;
+ u8 trigger_type;
+ char name[20];
+};
+
+struct sensor_value {
+ __le32 val;
+} __packed;
+
+static struct scpi_drvinfo *scpi_info;
+
+static int scpi_linux_errmap[SCPI_ERR_MAX] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* SCPI_SUCCESS */
+ -EINVAL, /* SCPI_ERR_PARAM */
+ -ENOEXEC, /* SCPI_ERR_ALIGN */
+ -EMSGSIZE, /* SCPI_ERR_SIZE */
+ -EINVAL, /* SCPI_ERR_HANDLER */
+ -EACCES, /* SCPI_ERR_ACCESS */
+ -ERANGE, /* SCPI_ERR_RANGE */
+ -ETIMEDOUT, /* SCPI_ERR_TIMEOUT */
+ -ENOMEM, /* SCPI_ERR_NOMEM */
+ -EINVAL, /* SCPI_ERR_PWRSTATE */
+ -EOPNOTSUPP, /* SCPI_ERR_SUPPORT */
+ -EIO, /* SCPI_ERR_DEVICE */
+ -EBUSY, /* SCPI_ERR_BUSY */
+};
+
+static inline int scpi_to_linux_errno(int errno)
+{
+ if (errno >= SCPI_SUCCESS && errno < SCPI_ERR_MAX)
+ return scpi_linux_errmap[errno];
+ return -EIO;
+}
+
+static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
+{
+ unsigned long flags;
+ struct scpi_xfer *t, *match = NULL;
+
+ spin_lock_irqsave(&ch->rx_lock, flags);
+ if (list_empty(&ch->rx_pending)) {
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+ return;
+ }
+
+ list_for_each_entry(t, &ch->rx_pending, node)
+ if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) {
+ list_del(&t->node);
+ match = t;
+ break;
+ }
+ /* check if wait_for_completion is in progress or timed-out */
+ if (match && !completion_done(&match->done)) {
+ struct scpi_shared_mem *mem = ch->rx_payload;
+ unsigned int len = min(match->rx_len, CMD_SIZE(cmd));
+
+ match->status = le32_to_cpu(mem->status);
+ memcpy_fromio(match->rx_buf, mem->payload, len);
+ if (match->rx_len > len)
+ memset(match->rx_buf + len, 0, match->rx_len - len);
+ complete(&match->done);
+ }
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+}
+
+static void scpi_handle_remote_msg(struct mbox_client *c, void *msg)
+{
+ struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+ struct scpi_shared_mem *mem = ch->rx_payload;
+ u32 cmd = le32_to_cpu(mem->command);
+
+ scpi_process_cmd(ch, cmd);
+}
+
+static void scpi_tx_prepare(struct mbox_client *c, void *msg)
+{
+ unsigned long flags;
+ struct scpi_xfer *t = msg;
+ struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+ struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload;
+
+ if (t->tx_buf)
+ memcpy_toio(mem->payload, t->tx_buf, t->tx_len);
+ if (t->rx_buf) {
+ if (!(++ch->token))
+ ++ch->token;
+ ADD_SCPI_TOKEN(t->cmd, ch->token);
+ spin_lock_irqsave(&ch->rx_lock, flags);
+ list_add_tail(&t->node, &ch->rx_pending);
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+ }
+ mem->command = cpu_to_le32(t->cmd);
+}
+
+static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
+{
+ struct scpi_xfer *t;
+
+ mutex_lock(&ch->xfers_lock);
+ if (list_empty(&ch->xfers_list)) {
+ mutex_unlock(&ch->xfers_lock);
+ return NULL;
+ }
+ t = list_first_entry(&ch->xfers_list, struct scpi_xfer, node);
+ list_del(&t->node);
+ mutex_unlock(&ch->xfers_lock);
+ return t;
+}
+
+static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch)
+{
+ mutex_lock(&ch->xfers_lock);
+ list_add_tail(&t->node, &ch->xfers_list);
+ mutex_unlock(&ch->xfers_lock);
+}
+
+static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len)
+{
+ int ret;
+ u8 chan;
+ struct scpi_xfer *msg;
+ struct scpi_chan *scpi_chan;
+
+ chan = atomic_inc_return(&scpi_info->next_chan) % scpi_info->num_chans;
+ scpi_chan = scpi_info->channels + chan;
+
+ msg = get_scpi_xfer(scpi_chan);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->slot = BIT(SCPI_SLOT);
+ msg->cmd = PACK_SCPI_CMD(cmd, tx_len);
+ msg->tx_buf = tx_buf;
+ msg->tx_len = tx_len;
+ msg->rx_buf = rx_buf;
+ msg->rx_len = rx_len;
+ init_completion(&msg->done);
+
+ ret = mbox_send_message(scpi_chan->chan, msg);
+ if (ret < 0 || !rx_buf)
+ goto out;
+
+ if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT))
+ ret = -ETIMEDOUT;
+ else
+ /* first status word */
+ ret = le32_to_cpu(msg->status);
+out:
+ if (ret < 0 && rx_buf) /* remove entry from the list if timed-out */
+ scpi_process_cmd(scpi_chan, msg->cmd);
+
+ put_scpi_xfer(msg, scpi_chan);
+ /* SCPI error codes > 0, translate them to Linux scale*/
+ return ret > 0 ? scpi_to_linux_errno(ret) : ret;
+}
+
+static u32 scpi_get_version(void)
+{
+ return scpi_info->protocol_version;
+}
+
+static int
+scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max)
+{
+ int ret;
+ struct clk_get_info clk;
+ __le16 le_clk_id = cpu_to_le16(clk_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_CLOCK_INFO, &le_clk_id,
+ sizeof(le_clk_id), &clk, sizeof(clk));
+ if (!ret) {
+ *min = le32_to_cpu(clk.min_rate);
+ *max = le32_to_cpu(clk.max_rate);
+ }
+ return ret;
+}
+
+static unsigned long scpi_clk_get_val(u16 clk_id)
+{
+ int ret;
+ struct clk_get_value clk;
+ __le16 le_clk_id = cpu_to_le16(clk_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_CLOCK_VALUE, &le_clk_id,
+ sizeof(le_clk_id), &clk, sizeof(clk));
+ return ret ? ret : le32_to_cpu(clk.rate);
+}
+
+static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
+{
+ int stat;
+ struct clk_set_value clk = {
+ .id = cpu_to_le16(clk_id),
+ .rate = cpu_to_le32(rate)
+ };
+
+ return scpi_send_message(SCPI_CMD_SET_CLOCK_VALUE, &clk, sizeof(clk),
+ &stat, sizeof(stat));
+}
+
+static int scpi_dvfs_get_idx(u8 domain)
+{
+ int ret;
+ struct dvfs_get dvfs;
+
+ ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain),
+ &dvfs, sizeof(dvfs));
+ return ret ? ret : dvfs.index;
+}
+
+static int scpi_dvfs_set_idx(u8 domain, u8 index)
+{
+ int stat;
+ struct dvfs_set dvfs = {domain, index};
+
+ return scpi_send_message(SCPI_CMD_SET_DVFS, &dvfs, sizeof(dvfs),
+ &stat, sizeof(stat));
+}
+
+static int opp_cmp_func(const void *opp1, const void *opp2)
+{
+ const struct scpi_opp *t1 = opp1, *t2 = opp2;
+
+ return t1->freq - t2->freq;
+}
+
+static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
+{
+ struct scpi_dvfs_info *info;
+ struct scpi_opp *opp;
+ struct dvfs_info buf;
+ int ret, i;
+
+ if (domain >= MAX_DVFS_DOMAINS)
+ return ERR_PTR(-EINVAL);
+
+ if (scpi_info->dvfs[domain]) /* data already populated */
+ return scpi_info->dvfs[domain];
+
+ ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain),
+ &buf, sizeof(buf));
+
+ if (ret)
+ return ERR_PTR(ret);
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ info->count = DVFS_OPP_COUNT(buf.header);
+ info->latency = DVFS_LATENCY(buf.header) * 1000; /* uS to nS */
+
+ info->opps = kcalloc(info->count, sizeof(*opp), GFP_KERNEL);
+ if (!info->opps) {
+ kfree(info);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0, opp = info->opps; i < info->count; i++, opp++) {
+ opp->freq = le32_to_cpu(buf.opps[i].freq);
+ opp->m_volt = le32_to_cpu(buf.opps[i].m_volt);
+ }
+
+ sort(info->opps, info->count, sizeof(*opp), opp_cmp_func, NULL);
+
+ scpi_info->dvfs[domain] = info;
+ return info;
+}
+
+static int scpi_sensor_get_capability(u16 *sensors)
+{
+ struct sensor_capabilities cap_buf;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_CAPABILITIES, NULL, 0, &cap_buf,
+ sizeof(cap_buf));
+ if (!ret)
+ *sensors = le16_to_cpu(cap_buf.sensors);
+
+ return ret;
+}
+
+static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
+{
+ __le16 id = cpu_to_le16(sensor_id);
+ struct _scpi_sensor_info _info;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_INFO, &id, sizeof(id),
+ &_info, sizeof(_info));
+ if (!ret) {
+ memcpy(info, &_info, sizeof(*info));
+ info->sensor_id = le16_to_cpu(_info.sensor_id);
+ }
+
+ return ret;
+}
+
+int scpi_sensor_get_value(u16 sensor, u32 *val)
+{
+ struct sensor_value buf;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_VALUE, &sensor, sizeof(sensor),
+ &buf, sizeof(buf));
+ if (!ret)
+ *val = le32_to_cpu(buf.val);
+
+ return ret;
+}
+
+static struct scpi_ops scpi_ops = {
+ .get_version = scpi_get_version,
+ .clk_get_range = scpi_clk_get_range,
+ .clk_get_val = scpi_clk_get_val,
+ .clk_set_val = scpi_clk_set_val,
+ .dvfs_get_idx = scpi_dvfs_get_idx,
+ .dvfs_set_idx = scpi_dvfs_set_idx,
+ .dvfs_get_info = scpi_dvfs_get_info,
+ .sensor_get_capability = scpi_sensor_get_capability,
+ .sensor_get_info = scpi_sensor_get_info,
+ .sensor_get_value = scpi_sensor_get_value,
+};
+
+struct scpi_ops *get_scpi_ops(void)
+{
+ return scpi_info ? scpi_info->scpi_ops : NULL;
+}
+EXPORT_SYMBOL_GPL(get_scpi_ops);
+
+static int scpi_init_versions(struct scpi_drvinfo *info)
+{
+ int ret;
+ struct scp_capabilities caps;
+
+ ret = scpi_send_message(SCPI_CMD_SCPI_CAPABILITIES, NULL, 0,
+ &caps, sizeof(caps));
+ if (!ret) {
+ info->protocol_version = le32_to_cpu(caps.protocol_version);
+ info->firmware_version = le32_to_cpu(caps.platform_version);
+ }
+ return ret;
+}
+
+static ssize_t protocol_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d\n",
+ PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
+ PROTOCOL_REV_MINOR(scpi_info->protocol_version));
+}
+static DEVICE_ATTR_RO(protocol_version);
+
+static ssize_t firmware_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d.%d\n",
+ FW_REV_MAJOR(scpi_info->firmware_version),
+ FW_REV_MINOR(scpi_info->firmware_version),
+ FW_REV_PATCH(scpi_info->firmware_version));
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static struct attribute *versions_attrs[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_protocol_version.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(versions);
+
+static void
+scpi_free_channels(struct device *dev, struct scpi_chan *pchan, int count)
+{
+ int i;
+
+ for (i = 0; i < count && pchan->chan; i++, pchan++) {
+ mbox_free_channel(pchan->chan);
+ devm_kfree(dev, pchan->xfers);
+ devm_iounmap(dev, pchan->rx_payload);
+ }
+}
+
+static int scpi_remove(struct platform_device *pdev)
+{
+ int i;
+ struct device *dev = &pdev->dev;
+ struct scpi_drvinfo *info = platform_get_drvdata(pdev);
+
+ scpi_info = NULL; /* stop exporting SCPI ops through get_scpi_ops */
+
+ of_platform_depopulate(dev);
+ sysfs_remove_groups(&dev->kobj, versions_groups);
+ scpi_free_channels(dev, info->channels, info->num_chans);
+ platform_set_drvdata(pdev, NULL);
+
+ for (i = 0; i < MAX_DVFS_DOMAINS && info->dvfs[i]; i++) {
+ kfree(info->dvfs[i]->opps);
+ kfree(info->dvfs[i]);
+ }
+ devm_kfree(dev, info->channels);
+ devm_kfree(dev, info);
+
+ return 0;
+}
+
+#define MAX_SCPI_XFERS 10
+static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
+{
+ int i;
+ struct scpi_xfer *xfers;
+
+ xfers = devm_kzalloc(dev, MAX_SCPI_XFERS * sizeof(*xfers), GFP_KERNEL);
+ if (!xfers)
+ return -ENOMEM;
+
+ ch->xfers = xfers;
+ for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++)
+ list_add_tail(&xfers->node, &ch->xfers_list);
+ return 0;
+}
+
+static int scpi_probe(struct platform_device *pdev)
+{
+ int count, idx, ret;
+ struct resource res;
+ struct scpi_chan *scpi_chan;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL);
+ if (!scpi_info)
+ return -ENOMEM;
+
+ count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+ if (count < 0) {
+ dev_err(dev, "no mboxes property in '%s'\n", np->full_name);
+ return -ENODEV;
+ }
+
+ scpi_chan = devm_kcalloc(dev, count, sizeof(*scpi_chan), GFP_KERNEL);
+ if (!scpi_chan)
+ return -ENOMEM;
+
+ for (idx = 0; idx < count; idx++) {
+ resource_size_t size;
+ struct scpi_chan *pchan = scpi_chan + idx;
+ struct mbox_client *cl = &pchan->cl;
+ struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
+
+ if (of_address_to_resource(shmem, 0, &res)) {
+ dev_err(dev, "failed to get SCPI payload mem resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ size = resource_size(&res);
+ pchan->rx_payload = devm_ioremap(dev, res.start, size);
+ if (!pchan->rx_payload) {
+ dev_err(dev, "failed to ioremap SCPI payload\n");
+ ret = -EADDRNOTAVAIL;
+ goto err;
+ }
+ pchan->tx_payload = pchan->rx_payload + (size >> 1);
+
+ cl->dev = dev;
+ cl->rx_callback = scpi_handle_remote_msg;
+ cl->tx_prepare = scpi_tx_prepare;
+ cl->tx_block = true;
+ cl->tx_tout = 50;
+ cl->knows_txdone = false; /* controller can't ack */
+
+ INIT_LIST_HEAD(&pchan->rx_pending);
+ INIT_LIST_HEAD(&pchan->xfers_list);
+ spin_lock_init(&pchan->rx_lock);
+ mutex_init(&pchan->xfers_lock);
+
+ ret = scpi_alloc_xfer_list(dev, pchan);
+ if (!ret) {
+ pchan->chan = mbox_request_channel(cl, idx);
+ if (!IS_ERR(pchan->chan))
+ continue;
+ ret = PTR_ERR(pchan->chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get channel%d err %d\n",
+ idx, ret);
+ }
+err:
+ scpi_free_channels(dev, scpi_chan, idx);
+ scpi_info = NULL;
+ return ret;
+ }
+
+ scpi_info->channels = scpi_chan;
+ scpi_info->num_chans = count;
+ platform_set_drvdata(pdev, scpi_info);
+
+ ret = scpi_init_versions(scpi_info);
+ if (ret) {
+ dev_err(dev, "incorrect or no SCP firmware found\n");
+ scpi_remove(pdev);
+ return ret;
+ }
+
+ _dev_info(dev, "SCP Protocol %d.%d Firmware %d.%d.%d version\n",
+ PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
+ PROTOCOL_REV_MINOR(scpi_info->protocol_version),
+ FW_REV_MAJOR(scpi_info->firmware_version),
+ FW_REV_MINOR(scpi_info->firmware_version),
+ FW_REV_PATCH(scpi_info->firmware_version));
+ scpi_info->scpi_ops = &scpi_ops;
+
+ ret = sysfs_create_groups(&dev->kobj, versions_groups);
+ if (ret)
+ dev_err(dev, "unable to create sysfs version group\n");
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static const struct of_device_id scpi_of_match[] = {
+ {.compatible = "arm,scpi"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, scpi_of_match);
+
+static struct platform_driver scpi_driver = {
+ .driver = {
+ .name = "scpi_protocol",
+ .of_match_table = scpi_of_match,
+ },
+ .probe = scpi_probe,
+ .remove = scpi_remove,
+};
+module_platform_driver(scpi_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI mailbox protocol driver");
+MODULE_LICENSE("GPL v2");
#
# Makefile for linux kernel
#
+
+#
+# ARM64 maps efi runtime services in userspace addresses
+# which don't have KASAN shadow. So dereference of these addresses
+# in efi_call_virt() will cause crash if this code instrumented.
+#
+KASAN_SANITIZE_runtime-wrappers.o := n
+
obj-$(CONFIG_EFI) += efi.o vars.o reboot.o
obj-$(CONFIG_EFI_VARS) += efivars.o
obj-$(CONFIG_EFI_ESRT) += esrt.o
cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) \
-fno-builtin -fpic -mno-single-pic-base
+cflags-$(CONFIG_EFI_ARMSTUB) += -I$(srctree)/scripts/dtc/libfdt
+
KBUILD_CFLAGS := $(cflags-y) \
$(call cc-option,-ffreestanding) \
$(call cc-option,-fno-stack-protector)
KASAN_SANITIZE := n
lib-y := efi-stub-helper.o
-lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o
+
+# include the stub's generic dependencies from lib/ when building for ARM/arm64
+arm-deps := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c sort.c
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+ $(call if_changed_rule,cc_o_c)
+
+lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o string.o \
+ $(patsubst %.c,lib-%.o,$(arm-deps))
+
+lib-$(CONFIG_ARM64) += arm64-stub.o
+CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
#
# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
# So let's apply the __init annotations at the section level, by prefixing
# the section names directly. This will ensure that even all the inline string
# literals are covered.
+# The fact that the stub and the kernel proper are essentially the same binary
+# also means that we need to be extra careful to make sure that the stub does
+# not rely on any absolute symbol references, considering that the virtual
+# kernel mapping that the linker uses is not active yet when the stub is
+# executing. So build all C dependencies of the EFI stub into libstub, and do
+# a verification pass to see if any absolute relocations exist in any of the
+# object files.
#
-extra-$(CONFIG_ARM64) := $(lib-y)
-lib-$(CONFIG_ARM64) := $(patsubst %.o,%.init.o,$(lib-y))
+extra-$(CONFIG_EFI_ARMSTUB) := $(lib-y)
+lib-$(CONFIG_EFI_ARMSTUB) := $(patsubst %.o,%.stub.o,$(lib-y))
+
+STUBCOPY_FLAGS-y := -R .debug* -R *ksymtab*
+STUBCOPY_FLAGS-$(CONFIG_ARM64) += --prefix-alloc-sections=.init \
+ --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
+
+$(obj)/%.stub.o: $(obj)/%.o FORCE
+ $(call if_changed,stubcopy)
-OBJCOPYFLAGS := --prefix-alloc-sections=.init
-$(obj)/%.init.o: $(obj)/%.o FORCE
- $(call if_changed,objcopy)
+quiet_cmd_stubcopy = STUBCPY $@
+ cmd_stubcopy = if $(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@; then \
+ $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y) \
+ && (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
+ rm -f $@; /bin/false); else /bin/false; fi
unsigned long kernel_size, kernel_memsize = 0;
unsigned long nr_pages;
void *old_image_addr = (void *)*image_addr;
+ unsigned long preferred_offset;
+
+ /*
+ * The preferred offset of the kernel Image is TEXT_OFFSET bytes beyond
+ * a 2 MB aligned base, which itself may be lower than dram_base, as
+ * long as the resulting offset equals or exceeds it.
+ */
+ preferred_offset = round_down(dram_base, SZ_2M) + TEXT_OFFSET;
+ if (preferred_offset < dram_base)
+ preferred_offset += SZ_2M;
/* Relocate the image, if required. */
kernel_size = _edata - _text;
- if (*image_addr != (dram_base + TEXT_OFFSET)) {
+ if (*image_addr != preferred_offset) {
kernel_memsize = kernel_size + (_end - _edata);
/*
* Mustang), we can still place the kernel at the address
* 'dram_base + TEXT_OFFSET'.
*/
- *image_addr = *reserve_addr = dram_base + TEXT_OFFSET;
+ *image_addr = *reserve_addr = preferred_offset;
nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) /
EFI_PAGE_SIZE;
status = efi_call_early(allocate_pages, EFI_ALLOCATE_ADDRESS,
if (status)
goto fdt_set_fail;
- /*
- * Add kernel version banner so stub/kernel match can be
- * verified.
- */
- status = fdt_setprop_string(fdt, node, "linux,uefi-stub-kern-ver",
- linux_banner);
- if (status)
- goto fdt_set_fail;
-
return EFI_SUCCESS;
fdt_set_fail:
--- /dev/null
+/*
+ * Taken from:
+ * linux/lib/string.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifndef __HAVE_ARCH_STRSTR
+/**
+ * strstr - Find the first substring in a %NUL terminated string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ */
+char *strstr(const char *s1, const char *s2)
+{
+ size_t l1, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ l1 = strlen(s1);
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+#endif
+
+#ifndef __HAVE_ARCH_STRNCMP
+/**
+ * strncmp - Compare two length-limited strings
+ * @cs: One string
+ * @ct: Another string
+ * @count: The maximum number of bytes to compare
+ */
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+ unsigned char c1, c2;
+
+ while (count) {
+ c1 = *cs++;
+ c2 = *ct++;
+ if (c1 != c2)
+ return c1 < c2 ? -1 : 1;
+ if (!c1)
+ break;
+ count--;
+ }
+ return 0;
+}
+#endif
#include <linux/printk.h>
#include <linux/psci.h>
#include <linux/reboot.h>
+#include <linux/suspend.h>
#include <uapi/linux/psci.h>
#include <asm/cputype.h>
#include <asm/system_misc.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
/*
* While a 64-bit OS can make calls with SMC32 calling conventions, for some
- * calls it is necessary to use SMC64 to pass or return 64-bit values. For such
- * calls PSCI_0_2_FN_NATIVE(x) will choose the appropriate (native-width)
- * function ID.
+ * calls it is necessary to use SMC64 to pass or return 64-bit values.
+ * For such calls PSCI_FN_NATIVE(version, name) will choose the appropriate
+ * (native-width) function ID.
*/
#ifdef CONFIG_64BIT
-#define PSCI_0_2_FN_NATIVE(name) PSCI_0_2_FN64_##name
+#define PSCI_FN_NATIVE(version, name) PSCI_##version##_FN64_##name
#else
-#define PSCI_0_2_FN_NATIVE(name) PSCI_0_2_FN_##name
+#define PSCI_FN_NATIVE(version, name) PSCI_##version##_FN_##name
#endif
/*
static u32 psci_function_id[PSCI_FN_MAX];
+#define PSCI_0_2_POWER_STATE_MASK \
+ (PSCI_0_2_POWER_STATE_ID_MASK | \
+ PSCI_0_2_POWER_STATE_TYPE_MASK | \
+ PSCI_0_2_POWER_STATE_AFFL_MASK)
+
+#define PSCI_1_0_EXT_POWER_STATE_MASK \
+ (PSCI_1_0_EXT_POWER_STATE_ID_MASK | \
+ PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
+
+static u32 psci_cpu_suspend_feature;
+
+static inline bool psci_has_ext_power_state(void)
+{
+ return psci_cpu_suspend_feature &
+ PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK;
+}
+
+bool psci_power_state_loses_context(u32 state)
+{
+ const u32 mask = psci_has_ext_power_state() ?
+ PSCI_1_0_EXT_POWER_STATE_TYPE_MASK :
+ PSCI_0_2_POWER_STATE_TYPE_MASK;
+
+ return state & mask;
+}
+
+bool psci_power_state_is_valid(u32 state)
+{
+ const u32 valid_mask = psci_has_ext_power_state() ?
+ PSCI_1_0_EXT_POWER_STATE_MASK :
+ PSCI_0_2_POWER_STATE_MASK;
+
+ return !(state & ~valid_mask);
+}
+
static int psci_to_linux_errno(int errno)
{
switch (errno) {
case PSCI_RET_NOT_SUPPORTED:
return -EOPNOTSUPP;
case PSCI_RET_INVALID_PARAMS:
+ case PSCI_RET_INVALID_ADDRESS:
return -EINVAL;
case PSCI_RET_DENIED:
return -EPERM;
static int psci_affinity_info(unsigned long target_affinity,
unsigned long lowest_affinity_level)
{
- return invoke_psci_fn(PSCI_0_2_FN_NATIVE(AFFINITY_INFO),
+ return invoke_psci_fn(PSCI_FN_NATIVE(0_2, AFFINITY_INFO),
target_affinity, lowest_affinity_level, 0);
}
static unsigned long psci_migrate_info_up_cpu(void)
{
- return invoke_psci_fn(PSCI_0_2_FN_NATIVE(MIGRATE_INFO_UP_CPU),
+ return invoke_psci_fn(PSCI_FN_NATIVE(0_2, MIGRATE_INFO_UP_CPU),
0, 0, 0);
}
invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
}
+static int __init psci_features(u32 psci_func_id)
+{
+ return invoke_psci_fn(PSCI_1_0_FN_PSCI_FEATURES,
+ psci_func_id, 0, 0);
+}
+
+static int psci_system_suspend(unsigned long unused)
+{
+ return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
+ virt_to_phys(cpu_resume), 0, 0);
+}
+
+static int psci_system_suspend_enter(suspend_state_t state)
+{
+ return cpu_suspend(0, psci_system_suspend);
+}
+
+static const struct platform_suspend_ops psci_suspend_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = psci_system_suspend_enter,
+};
+
+static void __init psci_init_system_suspend(void)
+{
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SUSPEND))
+ return;
+
+ ret = psci_features(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND));
+
+ if (ret != PSCI_RET_NOT_SUPPORTED)
+ suspend_set_ops(&psci_suspend_ops);
+}
+
+static void __init psci_init_cpu_suspend(void)
+{
+ int feature = psci_features(psci_function_id[PSCI_FN_CPU_SUSPEND]);
+
+ if (feature != PSCI_RET_NOT_SUPPORTED)
+ psci_cpu_suspend_feature = feature;
+}
+
/*
* Detect the presence of a resident Trusted OS which may cause CPU_OFF to
* return DENIED (which would be fatal).
static void __init psci_0_2_set_functions(void)
{
pr_info("Using standard PSCI v0.2 function IDs\n");
- psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_NATIVE(CPU_SUSPEND);
+ psci_function_id[PSCI_FN_CPU_SUSPEND] =
+ PSCI_FN_NATIVE(0_2, CPU_SUSPEND);
psci_ops.cpu_suspend = psci_cpu_suspend;
psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
psci_ops.cpu_off = psci_cpu_off;
- psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_NATIVE(CPU_ON);
+ psci_function_id[PSCI_FN_CPU_ON] = PSCI_FN_NATIVE(0_2, CPU_ON);
psci_ops.cpu_on = psci_cpu_on;
- psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_NATIVE(MIGRATE);
+ psci_function_id[PSCI_FN_MIGRATE] = PSCI_FN_NATIVE(0_2, MIGRATE);
psci_ops.migrate = psci_migrate;
psci_ops.affinity_info = psci_affinity_info;
psci_init_migrate();
+ if (PSCI_VERSION_MAJOR(ver) >= 1) {
+ psci_init_cpu_suspend();
+ psci_init_system_suspend();
+ }
+
return 0;
}
static const struct of_device_id const psci_of_match[] __initconst = {
{ .compatible = "arm,psci", .data = psci_0_1_init},
{ .compatible = "arm,psci-0.2", .data = psci_0_2_init},
+ { .compatible = "arm,psci-1.0", .data = psci_0_2_init},
{},
};
int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
{
int ret;
- u32 svc_cmd = (svc_id << 10) | cmd_id;
- u32 ret_val = 0;
+ __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
+ __le32 ret_val = 0;
ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
sizeof(svc_cmd), &ret_val, sizeof(ret_val));
if (ret)
return ret;
- return ret_val;
+ return le32_to_cpu(ret_val);
}
int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
+
+bool __qcom_scm_pas_supported(u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? false : !!out;
+}
+
+int __qcom_scm_pas_init_image(u32 peripheral, dma_addr_t metadata_phys)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 image_addr;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.image_addr = cpu_to_le32(metadata_phys);
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 addr;
+ __le32 len;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.addr = cpu_to_le32(addr);
+ request.len = cpu_to_le32(size);
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
+
+int __qcom_scm_pas_shutdown(u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
{
return -ENOTSUPP;
}
+
+bool __qcom_scm_pas_supported(u32 peripheral)
+{
+ return false;
+}
+
+int __qcom_scm_pas_init_image(u32 peripheral, dma_addr_t metadata_phys)
+{
+ return -ENOTSUPP;
+}
+
+int __qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+ return -ENOTSUPP;
+}
+
+int __qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+ return -ENOTSUPP;
+}
+
+int __qcom_scm_pas_shutdown(u32 peripheral)
+{
+ return -ENOTSUPP;
+}
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
*/
-
+#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/export.h>
+#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/of.h>
+#include <linux/clk.h>
#include "qcom_scm.h"
+struct qcom_scm {
+ struct device *dev;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *bus_clk;
+};
+
+static struct qcom_scm *__scm;
+
+static int qcom_scm_clk_enable(void)
+{
+ int ret;
+
+ ret = clk_prepare_enable(__scm->core_clk);
+ if (ret)
+ goto bail;
+ ret = clk_prepare_enable(__scm->iface_clk);
+ if (ret)
+ goto disable_core;
+ ret = clk_prepare_enable(__scm->bus_clk);
+ if (ret)
+ goto disable_iface;
+
+ return 0;
+
+disable_iface:
+ clk_disable_unprepare(__scm->iface_clk);
+disable_core:
+ clk_disable_unprepare(__scm->core_clk);
+bail:
+ return ret;
+}
+
+static void qcom_scm_clk_disable(void)
+{
+ clk_disable_unprepare(__scm->core_clk);
+ clk_disable_unprepare(__scm->iface_clk);
+ clk_disable_unprepare(__scm->bus_clk);
+}
+
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
*/
bool qcom_scm_hdcp_available(void)
{
- int ret;
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ goto clk_err;
ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
- QCOM_SCM_CMD_HDCP);
+ QCOM_SCM_CMD_HDCP);
+ qcom_scm_clk_disable();
+
+clk_err:
return (ret > 0) ? true : false;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- return __qcom_scm_hdcp_req(req, req_cnt, resp);
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_hdcp_req(req, req_cnt, resp);
+ qcom_scm_clk_disable();
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ * available for the given peripherial
+ * @peripheral: peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD);
+ if (ret <= 0)
+ return false;
+
+ return __qcom_scm_pas_supported(peripheral);
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
+/**
+ * qcom_scm_pas_init_image() - Initialize peripheral authentication service
+ * state machine for a given peripheral, using the
+ * metadata
+ * @peripheral: peripheral id
+ * @metadata: pointer to memory containing ELF header, program header table
+ * and optional blob of data used for authenticating the metadata
+ * and the rest of the firmware
+ * @size: size of the metadata
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
+{
+ dma_addr_t mdata_phys;
+ void *mdata_buf;
+ int ret;
+
+ /*
+ * During the scm call memory protection will be enabled for the meta
+ * data blob, so make sure it's physically contiguous, 4K aligned and
+ * non-cachable to avoid XPU violations.
+ */
+ mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, GFP_KERNEL);
+ if (!mdata_buf) {
+ dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
+ return -ENOMEM;
+ }
+ memcpy(mdata_buf, metadata, size);
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ goto free_metadata;
+
+ ret = __qcom_scm_pas_init_image(peripheral, mdata_phys);
+
+ qcom_scm_clk_disable();
+
+free_metadata:
+ dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_init_image);
+
+/**
+ * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
+ * for firmware loading
+ * @peripheral: peripheral id
+ * @addr: start address of memory area to prepare
+ * @size: size of the memory area to prepare
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_mem_setup(peripheral, addr, size);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
+
+/**
+ * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
+ * and reset the remote processor
+ * @peripheral: peripheral id
+ *
+ * Return 0 on success.
+ */
+int qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_auth_and_reset(peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
+
+/**
+ * qcom_scm_pas_shutdown() - Shut down the remote processor
+ * @peripheral: peripheral id
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_shutdown(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_shutdown(peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+ return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
+static int qcom_scm_probe(struct platform_device *pdev)
+{
+ struct qcom_scm *scm;
+ long rate;
+ int ret;
+
+ scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
+ if (!scm)
+ return -ENOMEM;
+
+ scm->dev = &pdev->dev;
+
+ scm->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(scm->core_clk)) {
+ if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire core clk\n");
+ return PTR_ERR(scm->core_clk);
+ }
+
+ scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(scm->iface_clk)) {
+ if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire iface clk\n");
+ return PTR_ERR(scm->iface_clk);
+ }
+
+ scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(scm->bus_clk)) {
+ if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire bus clk\n");
+ return PTR_ERR(scm->bus_clk);
+ }
+
+ /* vote for max clk rate for highest performance */
+ rate = clk_round_rate(scm->core_clk, INT_MAX);
+ ret = clk_set_rate(scm->core_clk, rate);
+ if (ret)
+ return ret;
+
+ __scm = scm;
+
+ return 0;
+}
+
+static const struct of_device_id qcom_scm_dt_match[] = {
+ { .compatible = "qcom,scm",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
+
+static struct platform_driver qcom_scm_driver = {
+ .driver = {
+ .name = "qcom_scm",
+ .of_match_table = qcom_scm_dt_match,
+ },
+ .probe = qcom_scm_probe,
+};
+
+builtin_platform_driver(qcom_scm_driver);
extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
+#define QCOM_SCM_SVC_PIL 0x2
+#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
+#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
+#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
+#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
+#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
+extern bool __qcom_scm_pas_supported(u32 peripheral);
+extern int __qcom_scm_pas_init_image(u32 peripheral, dma_addr_t metadata_phys);
+extern int __qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size);
+extern int __qcom_scm_pas_auth_and_reset(u32 peripheral);
+extern int __qcom_scm_pas_shutdown(u32 peripheral);
+
/* common error codes */
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
--- /dev/null
+/*
+ * Defines interfaces for interacting wtih the Raspberry Pi firmware's
+ * property channel.
+ *
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf))
+#define MBOX_CHAN(msg) ((msg) & 0xf)
+#define MBOX_DATA28(msg) ((msg) & ~0xf)
+#define MBOX_CHAN_PROPERTY 8
+
+struct rpi_firmware {
+ struct mbox_client cl;
+ struct mbox_chan *chan; /* The property channel. */
+ struct completion c;
+ u32 enabled;
+};
+
+static DEFINE_MUTEX(transaction_lock);
+
+static void response_callback(struct mbox_client *cl, void *msg)
+{
+ struct rpi_firmware *fw = container_of(cl, struct rpi_firmware, cl);
+ complete(&fw->c);
+}
+
+/*
+ * Sends a request to the firmware through the BCM2835 mailbox driver,
+ * and synchronously waits for the reply.
+ */
+static int
+rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data)
+{
+ u32 message = MBOX_MSG(chan, data);
+ int ret;
+
+ WARN_ON(data & 0xf);
+
+ mutex_lock(&transaction_lock);
+ reinit_completion(&fw->c);
+ ret = mbox_send_message(fw->chan, &message);
+ if (ret >= 0) {
+ wait_for_completion(&fw->c);
+ ret = 0;
+ } else {
+ dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
+ }
+ mutex_unlock(&transaction_lock);
+
+ return ret;
+}
+
+/**
+ * rpi_firmware_property_list - Submit firmware property list
+ * @fw: Pointer to firmware structure from rpi_firmware_get().
+ * @data: Buffer holding tags.
+ * @tag_size: Size of tags buffer.
+ *
+ * Submits a set of concatenated tags to the VPU firmware through the
+ * mailbox property interface.
+ *
+ * The buffer header and the ending tag are added by this function and
+ * don't need to be supplied, just the actual tags for your operation.
+ * See struct rpi_firmware_property_tag_header for the per-tag
+ * structure.
+ */
+int rpi_firmware_property_list(struct rpi_firmware *fw,
+ void *data, size_t tag_size)
+{
+ size_t size = tag_size + 12;
+ u32 *buf;
+ dma_addr_t bus_addr;
+ int ret;
+
+ /* Packets are processed a dword at a time. */
+ if (size & 3)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(fw->cl.dev, PAGE_ALIGN(size), &bus_addr,
+ GFP_ATOMIC);
+ if (!buf)
+ return -ENOMEM;
+
+ /* The firmware will error out without parsing in this case. */
+ WARN_ON(size >= 1024 * 1024);
+
+ buf[0] = size;
+ buf[1] = RPI_FIRMWARE_STATUS_REQUEST;
+ memcpy(&buf[2], data, tag_size);
+ buf[size / 4 - 1] = RPI_FIRMWARE_PROPERTY_END;
+ wmb();
+
+ ret = rpi_firmware_transaction(fw, MBOX_CHAN_PROPERTY, bus_addr);
+
+ rmb();
+ memcpy(data, &buf[2], tag_size);
+ if (ret == 0 && buf[1] != RPI_FIRMWARE_STATUS_SUCCESS) {
+ /*
+ * The tag name here might not be the one causing the
+ * error, if there were multiple tags in the request.
+ * But single-tag is the most common, so go with it.
+ */
+ dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n",
+ buf[2], buf[1]);
+ ret = -EINVAL;
+ }
+
+ dma_free_coherent(fw->cl.dev, PAGE_ALIGN(size), buf, bus_addr);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property_list);
+
+/**
+ * rpi_firmware_property - Submit single firmware property
+ * @fw: Pointer to firmware structure from rpi_firmware_get().
+ * @tag: One of enum_mbox_property_tag.
+ * @tag_data: Tag data buffer.
+ * @buf_size: Buffer size.
+ *
+ * Submits a single tag to the VPU firmware through the mailbox
+ * property interface.
+ *
+ * This is a convenience wrapper around
+ * rpi_firmware_property_list() to avoid some of the
+ * boilerplate in property calls.
+ */
+int rpi_firmware_property(struct rpi_firmware *fw,
+ u32 tag, void *tag_data, size_t buf_size)
+{
+ /* Single tags are very small (generally 8 bytes), so the
+ * stack should be safe.
+ */
+ u8 data[buf_size + sizeof(struct rpi_firmware_property_tag_header)];
+ struct rpi_firmware_property_tag_header *header =
+ (struct rpi_firmware_property_tag_header *)data;
+ int ret;
+
+ header->tag = tag;
+ header->buf_size = buf_size;
+ header->req_resp_size = 0;
+ memcpy(data + sizeof(struct rpi_firmware_property_tag_header),
+ tag_data, buf_size);
+
+ ret = rpi_firmware_property_list(fw, &data, sizeof(data));
+ memcpy(tag_data,
+ data + sizeof(struct rpi_firmware_property_tag_header),
+ buf_size);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property);
+
+static void
+rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
+{
+ u32 packet;
+ int ret = rpi_firmware_property(fw,
+ RPI_FIRMWARE_GET_FIRMWARE_REVISION,
+ &packet, sizeof(packet));
+
+ if (ret == 0) {
+ struct tm tm;
+
+ time_to_tm(packet, 0, &tm);
+
+ dev_info(fw->cl.dev,
+ "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n",
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min);
+ }
+}
+
+static int rpi_firmware_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rpi_firmware *fw;
+
+ fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
+ if (!fw)
+ return -ENOMEM;
+
+ fw->cl.dev = dev;
+ fw->cl.rx_callback = response_callback;
+ fw->cl.tx_block = true;
+
+ fw->chan = mbox_request_channel(&fw->cl, 0);
+ if (IS_ERR(fw->chan)) {
+ int ret = PTR_ERR(fw->chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get mbox channel: %d\n", ret);
+ return ret;
+ }
+
+ init_completion(&fw->c);
+
+ platform_set_drvdata(pdev, fw);
+
+ rpi_firmware_print_firmware_revision(fw);
+
+ return 0;
+}
+
+static int rpi_firmware_remove(struct platform_device *pdev)
+{
+ struct rpi_firmware *fw = platform_get_drvdata(pdev);
+
+ mbox_free_channel(fw->chan);
+
+ return 0;
+}
+
+/**
+ * rpi_firmware_get - Get pointer to rpi_firmware structure.
+ * @firmware_node: Pointer to the firmware Device Tree node.
+ *
+ * Returns NULL is the firmware device is not ready.
+ */
+struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
+{
+ struct platform_device *pdev = of_find_device_by_node(firmware_node);
+
+ if (!pdev)
+ return NULL;
+
+ return platform_get_drvdata(pdev);
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_get);
+
+static const struct of_device_id rpi_firmware_of_match[] = {
+ { .compatible = "raspberrypi,bcm2835-firmware", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rpi_firmware_of_match);
+
+static struct platform_driver rpi_firmware_driver = {
+ .driver = {
+ .name = "raspberrypi-firmware",
+ .of_match_table = rpi_firmware_of_match,
+ },
+ .probe = rpi_firmware_probe,
+ .remove = rpi_firmware_remove,
+};
+module_platform_driver(rpi_firmware_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi firmware driver");
+MODULE_LICENSE("GPL v2");
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/module.h>
-#include <asm-generic/bug.h>
+#include <linux/bug.h>
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct amdgpu_dpm dpm;
const struct firmware *fw; /* SMC firmware */
uint32_t fw_version;
/* disp clock */
adev->clock.default_dispclk =
le32_to_cpu(firmware_info->info_21.ulDefaultDispEngineClkFreq);
- if (adev->clock.default_dispclk == 0)
- adev->clock.default_dispclk = 54000; /* 540 Mhz */
+ /* set a reasonable default for DP */
+ if (adev->clock.default_dispclk < 53900) {
+ DRM_INFO("Changing default dispclk from %dMhz to 600Mhz\n",
+ adev->clock.default_dispclk / 100);
+ adev->clock.default_dispclk = 60000;
+ }
adev->clock.dp_extclk =
le16_to_cpu(firmware_info->info_21.usUniphyDPModeExtClkFreq);
adev->clock.current_dispclk = adev->clock.default_dispclk;
/* get chunks */
INIT_LIST_HEAD(&p->validated);
- chunk_array_user = (uint64_t __user *)(cs->in.chunks);
+ chunk_array_user = (uint64_t __user *)(unsigned long)(cs->in.chunks);
if (copy_from_user(chunk_array, chunk_array_user,
sizeof(uint64_t)*cs->in.num_chunks)) {
ret = -EFAULT;
struct drm_amdgpu_cs_chunk user_chunk;
uint32_t __user *cdata;
- chunk_ptr = (void __user *)chunk_array[i];
+ chunk_ptr = (void __user *)(unsigned long)chunk_array[i];
if (copy_from_user(&user_chunk, chunk_ptr,
sizeof(struct drm_amdgpu_cs_chunk))) {
ret = -EFAULT;
p->chunks[i].length_dw = user_chunk.length_dw;
size = p->chunks[i].length_dw;
- cdata = (void __user *)user_chunk.chunk_data;
+ cdata = (void __user *)(unsigned long)user_chunk.chunk_data;
p->chunks[i].user_ptr = cdata;
p->chunks[i].kdata = drm_malloc_ab(size, sizeof(uint32_t));
/* We borrow the event spin lock for protecting flip_status */
spin_lock_irqsave(&crtc->dev->event_lock, flags);
- /* set the proper interrupt */
- amdgpu_irq_get(adev, &adev->pageflip_irq, work->crtc_id);
/* do the flip (mmio) */
adev->mode_info.funcs->page_flip(adev, work->crtc_id, work->base);
/* set the flip status */
goto cleanup;
}
- fence_get(work->excl);
- for (i = 0; i < work->shared_count; ++i)
- fence_get(work->shared[i]);
-
amdgpu_bo_get_tiling_flags(new_rbo, &tiling_flags);
amdgpu_bo_unreserve(new_rbo);
{0x1002, 0x985F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MULLINS|AMD_IS_MOBILITY|AMD_IS_APU},
#endif
/* topaz */
- {0x1002, 0x6900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ},
- {0x1002, 0x6901, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ},
- {0x1002, 0x6902, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ},
- {0x1002, 0x6903, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ},
- {0x1002, 0x6907, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ},
+ {0x1002, 0x6900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ|AMD_EXP_HW_SUPPORT},
+ {0x1002, 0x6901, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ|AMD_EXP_HW_SUPPORT},
+ {0x1002, 0x6902, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ|AMD_EXP_HW_SUPPORT},
+ {0x1002, 0x6903, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ|AMD_EXP_HW_SUPPORT},
+ {0x1002, 0x6907, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TOPAZ|AMD_EXP_HW_SUPPORT},
/* tonga */
{0x1002, 0x6920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TONGA},
{0x1002, 0x6921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TONGA},
return true;
return false;
}
+
+void amdgpu_fbdev_restore_mode(struct amdgpu_device *adev)
+{
+ struct amdgpu_fbdev *afbdev = adev->mode_info.rfbdev;
+ struct drm_fb_helper *fb_helper;
+ int ret;
+
+ if (!afbdev)
+ return;
+
+ fb_helper = &afbdev->helper;
+
+ ret = drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
+ if (ret)
+ DRM_DEBUG("failed to restore crtc mode\n");
+}
* Outdated mess for old drm with Xorg being in charge (void function now).
*/
/**
- * amdgpu_driver_firstopen_kms - drm callback for last close
+ * amdgpu_driver_lastclose_kms - drm callback for last close
*
* @dev: drm dev pointer
*
*/
void amdgpu_driver_lastclose_kms(struct drm_device *dev)
{
+ struct amdgpu_device *adev = dev->dev_private;
+
+ amdgpu_fbdev_restore_mode(adev);
vga_switcheroo_process_delayed_switch();
}
void amdgpu_fbdev_set_suspend(struct amdgpu_device *adev, int state);
int amdgpu_fbdev_total_size(struct amdgpu_device *adev);
bool amdgpu_fbdev_robj_is_fb(struct amdgpu_device *adev, struct amdgpu_bo *robj);
+void amdgpu_fbdev_restore_mode(struct amdgpu_device *adev);
void amdgpu_fb_output_poll_changed(struct amdgpu_device *adev);
struct amdgpu_device *adev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (!adev->pm.dpm_enabled &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
{
int ret;
+ if (adev->pm.sysfs_initialized)
+ return 0;
+
if (adev->pm.funcs->get_temperature == NULL)
return 0;
adev->pm.int_hwmon_dev = hwmon_device_register_with_groups(adev->dev,
return ret;
}
+ adev->pm.sysfs_initialized = true;
+
return 0;
}
return -ENOMEM;
r = amdgpu_ib_get(ring, NULL, ndw * 4, ib);
- if (r)
+ if (r) {
+ kfree(ib);
return r;
+ }
ib->length_dw = 0;
/* walk over the address space and update the page directory */
if (!amdgpu_dpm)
return 0;
+ /* init the sysfs and debugfs files late */
+ ret = amdgpu_pm_sysfs_init(adev);
+ if (ret)
+ return ret;
+
ret = ci_set_temperature_range(adev);
if (ret)
return ret;
adev->pm.dpm.current_ps = adev->pm.dpm.requested_ps = adev->pm.dpm.boot_ps;
if (amdgpu_dpm == 1)
amdgpu_pm_print_power_states(adev);
- ret = amdgpu_pm_sysfs_init(adev);
- if (ret)
- goto dpm_failed;
mutex_unlock(&adev->pm.mutex);
DRM_INFO("amdgpu: dpm initialized\n");
int ret, i;
u16 tmp16;
+ if (pci_is_root_bus(adev->pdev->bus))
+ return;
+
if (amdgpu_pcie_gen2 == 0)
return;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
if (amdgpu_dpm) {
+ int ret;
+ /* init the sysfs and debugfs files late */
+ ret = amdgpu_pm_sysfs_init(adev);
+ if (ret)
+ return ret;
+
/* powerdown unused blocks for now */
cz_dpm_powergate_uvd(adev, true);
cz_dpm_powergate_vce(adev, true);
if (amdgpu_dpm == 1)
amdgpu_pm_print_power_states(adev);
- ret = amdgpu_pm_sysfs_init(adev);
- if (ret)
- goto dpm_init_failed;
-
mutex_unlock(&adev->pm.mutex);
DRM_INFO("amdgpu: dpm initialized\n");
return RREG32(mmCRTC_STATUS_FRAME_COUNT + crtc_offsets[crtc]);
}
+static void dce_v10_0_pageflip_interrupt_init(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Enable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_get(adev, &adev->pageflip_irq, i);
+}
+
+static void dce_v10_0_pageflip_interrupt_fini(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Disable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_put(adev, &adev->pageflip_irq, i);
+}
+
/**
* dce_v10_0_page_flip - pageflip callback.
*
dce_v10_0_vga_enable(crtc, true);
amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
dce_v10_0_vga_enable(crtc, false);
- /* Make sure VBLANK interrupt is still enabled */
+ /* Make sure VBLANK and PFLIP interrupts are still enabled */
type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
amdgpu_irq_update(adev, &adev->crtc_irq, type);
+ amdgpu_irq_update(adev, &adev->pageflip_irq, type);
drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
dce_v10_0_crtc_load_lut(crtc);
break;
dce_v10_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v10_0_pageflip_interrupt_init(adev);
+
return 0;
}
dce_v10_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v10_0_pageflip_interrupt_fini(adev);
+
return 0;
}
dce_v10_0_hpd_fini(adev);
+ dce_v10_0_pageflip_interrupt_fini(adev);
+
return 0;
}
/* initialize hpd */
dce_v10_0_hpd_init(adev);
+ dce_v10_0_pageflip_interrupt_init(adev);
+
return 0;
}
spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
drm_vblank_put(adev->ddev, amdgpu_crtc->crtc_id);
- amdgpu_irq_put(adev, &adev->pageflip_irq, crtc_id);
queue_work(amdgpu_crtc->pflip_queue, &works->unpin_work);
return 0;
return RREG32(mmCRTC_STATUS_FRAME_COUNT + crtc_offsets[crtc]);
}
+static void dce_v11_0_pageflip_interrupt_init(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Enable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_get(adev, &adev->pageflip_irq, i);
+}
+
+static void dce_v11_0_pageflip_interrupt_fini(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Disable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_put(adev, &adev->pageflip_irq, i);
+}
+
/**
* dce_v11_0_page_flip - pageflip callback.
*
dce_v11_0_vga_enable(crtc, true);
amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
dce_v11_0_vga_enable(crtc, false);
- /* Make sure VBLANK interrupt is still enabled */
+ /* Make sure VBLANK and PFLIP interrupts are still enabled */
type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
amdgpu_irq_update(adev, &adev->crtc_irq, type);
+ amdgpu_irq_update(adev, &adev->pageflip_irq, type);
drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
dce_v11_0_crtc_load_lut(crtc);
break;
switch (adev->asic_type) {
case CHIP_CARRIZO:
- adev->mode_info.num_crtc = 4;
+ adev->mode_info.num_crtc = 3;
adev->mode_info.num_hpd = 6;
adev->mode_info.num_dig = 9;
break;
dce_v11_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v11_0_pageflip_interrupt_init(adev);
+
return 0;
}
dce_v11_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v11_0_pageflip_interrupt_fini(adev);
+
return 0;
}
dce_v11_0_hpd_fini(adev);
+ dce_v11_0_pageflip_interrupt_fini(adev);
+
return 0;
}
/* initialize hpd */
dce_v11_0_hpd_init(adev);
+ dce_v11_0_pageflip_interrupt_init(adev);
+
return 0;
}
spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
drm_vblank_put(adev->ddev, amdgpu_crtc->crtc_id);
- amdgpu_irq_put(adev, &adev->pageflip_irq, crtc_id);
queue_work(amdgpu_crtc->pflip_queue, &works->unpin_work);
return 0;
return RREG32(mmCRTC_STATUS_FRAME_COUNT + crtc_offsets[crtc]);
}
+static void dce_v8_0_pageflip_interrupt_init(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Enable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_get(adev, &adev->pageflip_irq, i);
+}
+
+static void dce_v8_0_pageflip_interrupt_fini(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ /* Disable pflip interrupts */
+ for (i = 0; i < adev->mode_info.num_crtc; i++)
+ amdgpu_irq_put(adev, &adev->pageflip_irq, i);
+}
+
/**
* dce_v8_0_page_flip - pageflip callback.
*
dce_v8_0_vga_enable(crtc, true);
amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
dce_v8_0_vga_enable(crtc, false);
- /* Make sure VBLANK interrupt is still enabled */
+ /* Make sure VBLANK and PFLIP interrupts are still enabled */
type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
amdgpu_irq_update(adev, &adev->crtc_irq, type);
+ amdgpu_irq_update(adev, &adev->pageflip_irq, type);
drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
dce_v8_0_crtc_load_lut(crtc);
break;
dce_v8_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v8_0_pageflip_interrupt_init(adev);
+
return 0;
}
dce_v8_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false);
}
+ dce_v8_0_pageflip_interrupt_fini(adev);
+
return 0;
}
dce_v8_0_hpd_fini(adev);
+ dce_v8_0_pageflip_interrupt_fini(adev);
+
return 0;
}
/* initialize hpd */
dce_v8_0_hpd_init(adev);
+ dce_v8_0_pageflip_interrupt_init(adev);
+
return 0;
}
spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
drm_vblank_put(adev->ddev, amdgpu_crtc->crtc_id);
- amdgpu_irq_put(adev, &adev->pageflip_irq, crtc_id);
queue_work(amdgpu_crtc->pflip_queue, &works->unpin_work);
return 0;
{
/* powerdown unused blocks for now */
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ int ret;
+
+ if (!amdgpu_dpm)
+ return 0;
+
+ /* init the sysfs and debugfs files late */
+ ret = amdgpu_pm_sysfs_init(adev);
+ if (ret)
+ return ret;
kv_dpm_powergate_acp(adev, true);
kv_dpm_powergate_samu(adev, true);
adev->pm.dpm.current_ps = adev->pm.dpm.requested_ps = adev->pm.dpm.boot_ps;
if (amdgpu_dpm == 1)
amdgpu_pm_print_power_states(adev);
- ret = amdgpu_pm_sysfs_init(adev);
- if (ret)
- goto dpm_failed;
mutex_unlock(&adev->pm.mutex);
DRM_INFO("amdgpu: dpm initialized\n");
u32 mask;
int ret;
+ if (pci_is_root_bus(adev->pdev->bus))
+ return;
+
if (amdgpu_pcie_gen2 == 0)
return;
This driver provides no built-in acceleration; acceleration is
performed by other IP found on the SoC. This driver provides
kernel mode setting and buffer management to userspace.
-
-config DRM_ARMADA_TDA1998X
- bool "Support TDA1998X HDMI output"
- depends on DRM_ARMADA != n
- depends on I2C && DRM_I2C_NXP_TDA998X = y
- default y
- help
- Support the TDA1998x HDMI output device found on the Solid-Run
- CuBox.
armada-y := armada_crtc.o armada_drv.o armada_fb.o armada_fbdev.o \
- armada_gem.o armada_output.o armada_overlay.o \
- armada_slave.o
+ armada_gem.o armada_overlay.o
armada-y += armada_510.o
armada-$(CONFIG_DEBUG_FS) += armada_debugfs.o
#include "armada_hw.h"
struct armada_frame_work {
+ struct armada_plane_work work;
struct drm_pending_vblank_event *event;
struct armada_regs regs[4];
struct drm_framebuffer *old_fb;
CSC_RGB_STUDIO = 2,
};
+static const uint32_t armada_primary_formats[] = {
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_VYUY,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_ABGR8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_BGR888,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_ABGR1555,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_BGR565,
+};
+
/*
* A note about interlacing. Let's consider HDMI 1920x1080i.
* The timing parameters we have from X are:
return i;
}
-static int armada_drm_crtc_queue_frame_work(struct armada_crtc *dcrtc,
- struct armada_frame_work *work)
+static void armada_drm_plane_work_run(struct armada_crtc *dcrtc,
+ struct armada_plane *plane)
+{
+ struct armada_plane_work *work = xchg(&plane->work, NULL);
+
+ /* Handle any pending frame work. */
+ if (work) {
+ work->fn(dcrtc, plane, work);
+ drm_vblank_put(dcrtc->crtc.dev, dcrtc->num);
+ }
+
+ wake_up(&plane->frame_wait);
+}
+
+int armada_drm_plane_work_queue(struct armada_crtc *dcrtc,
+ struct armada_plane *plane, struct armada_plane_work *work)
{
- struct drm_device *dev = dcrtc->crtc.dev;
- unsigned long flags;
int ret;
- ret = drm_vblank_get(dev, dcrtc->num);
+ ret = drm_vblank_get(dcrtc->crtc.dev, dcrtc->num);
if (ret) {
DRM_ERROR("failed to acquire vblank counter\n");
return ret;
}
- spin_lock_irqsave(&dev->event_lock, flags);
- if (!dcrtc->frame_work)
- dcrtc->frame_work = work;
- else
- ret = -EBUSY;
- spin_unlock_irqrestore(&dev->event_lock, flags);
-
+ ret = cmpxchg(&plane->work, NULL, work) ? -EBUSY : 0;
if (ret)
- drm_vblank_put(dev, dcrtc->num);
+ drm_vblank_put(dcrtc->crtc.dev, dcrtc->num);
return ret;
}
-static void armada_drm_crtc_complete_frame_work(struct armada_crtc *dcrtc)
+int armada_drm_plane_work_wait(struct armada_plane *plane, long timeout)
{
- struct drm_device *dev = dcrtc->crtc.dev;
- struct armada_frame_work *work = dcrtc->frame_work;
+ return wait_event_timeout(plane->frame_wait, !plane->work, timeout);
+}
- dcrtc->frame_work = NULL;
+struct armada_plane_work *armada_drm_plane_work_cancel(
+ struct armada_crtc *dcrtc, struct armada_plane *plane)
+{
+ struct armada_plane_work *work = xchg(&plane->work, NULL);
- armada_drm_crtc_update_regs(dcrtc, work->regs);
+ if (work)
+ drm_vblank_put(dcrtc->crtc.dev, dcrtc->num);
- if (work->event)
- drm_send_vblank_event(dev, dcrtc->num, work->event);
+ return work;
+}
- drm_vblank_put(dev, dcrtc->num);
+static int armada_drm_crtc_queue_frame_work(struct armada_crtc *dcrtc,
+ struct armada_frame_work *work)
+{
+ struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary);
+
+ return armada_drm_plane_work_queue(dcrtc, plane, &work->work);
+}
+
+static void armada_drm_crtc_complete_frame_work(struct armada_crtc *dcrtc,
+ struct armada_plane *plane, struct armada_plane_work *work)
+{
+ struct armada_frame_work *fwork = container_of(work, struct armada_frame_work, work);
+ struct drm_device *dev = dcrtc->crtc.dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dcrtc->irq_lock, flags);
+ armada_drm_crtc_update_regs(dcrtc, fwork->regs);
+ spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
+
+ if (fwork->event) {
+ spin_lock_irqsave(&dev->event_lock, flags);
+ drm_send_vblank_event(dev, dcrtc->num, fwork->event);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
/* Finally, queue the process-half of the cleanup. */
- __armada_drm_queue_unref_work(dcrtc->crtc.dev, work->old_fb);
- kfree(work);
+ __armada_drm_queue_unref_work(dcrtc->crtc.dev, fwork->old_fb);
+ kfree(fwork);
}
static void armada_drm_crtc_finish_fb(struct armada_crtc *dcrtc,
work = kmalloc(sizeof(*work), GFP_KERNEL);
if (work) {
int i = 0;
+ work->work.fn = armada_drm_crtc_complete_frame_work;
work->event = NULL;
work->old_fb = fb;
armada_reg_queue_end(work->regs, i);
static void armada_drm_vblank_off(struct armada_crtc *dcrtc)
{
- struct drm_device *dev = dcrtc->crtc.dev;
+ struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary);
/*
* Tell the DRM core that vblank IRQs aren't going to happen for
* a while. This cleans up any pending vblank events for us.
*/
drm_crtc_vblank_off(&dcrtc->crtc);
-
- /* Handle any pending flip event. */
- spin_lock_irq(&dev->event_lock);
- if (dcrtc->frame_work)
- armada_drm_crtc_complete_frame_work(dcrtc);
- spin_unlock_irq(&dev->event_lock);
+ armada_drm_plane_work_run(dcrtc, plane);
}
void armada_drm_crtc_gamma_set(struct drm_crtc *crtc, u16 r, u16 g, u16 b,
if (dcrtc->dpms != dpms) {
dcrtc->dpms = dpms;
+ if (!IS_ERR(dcrtc->clk) && !dpms_blanked(dpms))
+ WARN_ON(clk_prepare_enable(dcrtc->clk));
armada_drm_crtc_update(dcrtc);
+ if (!IS_ERR(dcrtc->clk) && dpms_blanked(dpms))
+ clk_disable_unprepare(dcrtc->clk);
if (dpms_blanked(dpms))
armada_drm_vblank_off(dcrtc);
else
/*
* If we have an overlay plane associated with this CRTC, disable
* it before the modeset to avoid its coordinates being outside
- * the new mode parameters. DRM doesn't provide help with this.
+ * the new mode parameters.
*/
plane = dcrtc->plane;
- if (plane) {
- struct drm_framebuffer *fb = plane->fb;
-
- plane->funcs->disable_plane(plane);
- plane->fb = NULL;
- plane->crtc = NULL;
- drm_framebuffer_unreference(fb);
- }
+ if (plane)
+ drm_plane_force_disable(plane);
}
/* The mode_config.mutex will be held for this call */
static void armada_drm_crtc_irq(struct armada_crtc *dcrtc, u32 stat)
{
- struct armada_vbl_event *e, *n;
void __iomem *base = dcrtc->base;
+ struct drm_plane *ovl_plane;
if (stat & DMA_FF_UNDERFLOW)
DRM_ERROR("video underflow on crtc %u\n", dcrtc->num);
drm_handle_vblank(dcrtc->crtc.dev, dcrtc->num);
spin_lock(&dcrtc->irq_lock);
-
- list_for_each_entry_safe(e, n, &dcrtc->vbl_list, node) {
- list_del_init(&e->node);
- drm_vblank_put(dcrtc->crtc.dev, dcrtc->num);
- e->fn(dcrtc, e->data);
+ ovl_plane = dcrtc->plane;
+ if (ovl_plane) {
+ struct armada_plane *plane = drm_to_armada_plane(ovl_plane);
+ armada_drm_plane_work_run(dcrtc, plane);
}
if (stat & GRA_FRAME_IRQ && dcrtc->interlaced) {
spin_unlock(&dcrtc->irq_lock);
if (stat & GRA_FRAME_IRQ) {
- struct drm_device *dev = dcrtc->crtc.dev;
-
- spin_lock(&dev->event_lock);
- if (dcrtc->frame_work)
- armada_drm_crtc_complete_frame_work(dcrtc);
- spin_unlock(&dev->event_lock);
-
- wake_up(&dcrtc->frame_wait);
+ struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary);
+ armada_drm_plane_work_run(dcrtc, plane);
}
}
adj->crtc_vtotal, tm, bm);
/* Wait for pending flips to complete */
- wait_event(dcrtc->frame_wait, !dcrtc->frame_work);
+ armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary),
+ MAX_SCHEDULE_TIMEOUT);
drm_crtc_vblank_off(crtc);
writel_relaxed(val, dcrtc->base + LCD_SPU_DUMB_CTRL);
}
+ /*
+ * If we are blanked, we would have disabled the clock. Re-enable
+ * it so that compute_clock() does the right thing.
+ */
+ if (!IS_ERR(dcrtc->clk) && dpms_blanked(dcrtc->dpms))
+ WARN_ON(clk_prepare_enable(dcrtc->clk));
+
/* Now compute the divider for real */
dcrtc->variant->compute_clock(dcrtc, adj, &sclk);
armada_reg_queue_end(regs, i);
/* Wait for pending flips to complete */
- wait_event(dcrtc->frame_wait, !dcrtc->frame_work);
+ armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary),
+ MAX_SCHEDULE_TIMEOUT);
/* Take a reference to the new fb as we're using it */
drm_framebuffer_reference(crtc->primary->fb);
return 0;
}
+void armada_drm_crtc_plane_disable(struct armada_crtc *dcrtc,
+ struct drm_plane *plane)
+{
+ u32 sram_para1, dma_ctrl0_mask;
+
+ /*
+ * Drop our reference on any framebuffer attached to this plane.
+ * We don't need to NULL this out as drm_plane_force_disable(),
+ * and __setplane_internal() will do so for an overlay plane, and
+ * __drm_helper_disable_unused_functions() will do so for the
+ * primary plane.
+ */
+ if (plane->fb)
+ drm_framebuffer_unreference(plane->fb);
+
+ /* Power down the Y/U/V FIFOs */
+ sram_para1 = CFG_PDWN16x66 | CFG_PDWN32x66;
+
+ /* Power down most RAMs and FIFOs if this is the primary plane */
+ if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+ sram_para1 |= CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 |
+ CFG_PDWN32x32 | CFG_PDWN64x66;
+ dma_ctrl0_mask = CFG_GRA_ENA;
+ } else {
+ dma_ctrl0_mask = CFG_DMA_ENA;
+ }
+
+ spin_lock_irq(&dcrtc->irq_lock);
+ armada_updatel(0, dma_ctrl0_mask, dcrtc->base + LCD_SPU_DMA_CTRL0);
+ spin_unlock_irq(&dcrtc->irq_lock);
+
+ armada_updatel(sram_para1, 0, dcrtc->base + LCD_SPU_SRAM_PARA1);
+}
+
/* The mode_config.mutex will be held for this call */
static void armada_drm_crtc_disable(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
armada_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
- armada_drm_crtc_finish_fb(dcrtc, crtc->primary->fb, true);
-
- /* Power down most RAMs and FIFOs */
- writel_relaxed(CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 |
- CFG_PDWN32x32 | CFG_PDWN16x66 | CFG_PDWN32x66 |
- CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1);
+ armada_drm_crtc_plane_disable(dcrtc, crtc->primary);
}
static const struct drm_crtc_helper_funcs armada_crtc_helper_funcs = {
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_frame_work *work;
- struct drm_device *dev = crtc->dev;
- unsigned long flags;
unsigned i;
int ret;
if (!work)
return -ENOMEM;
+ work->work.fn = armada_drm_crtc_complete_frame_work;
work->event = event;
work->old_fb = dcrtc->crtc.primary->fb;
* Finally, if the display is blanked, we won't receive an
* interrupt, so complete it now.
*/
- if (dpms_blanked(dcrtc->dpms)) {
- spin_lock_irqsave(&dev->event_lock, flags);
- if (dcrtc->frame_work)
- armada_drm_crtc_complete_frame_work(dcrtc);
- spin_unlock_irqrestore(&dev->event_lock, flags);
- }
+ if (dpms_blanked(dcrtc->dpms))
+ armada_drm_plane_work_run(dcrtc, drm_to_armada_plane(dcrtc->crtc.primary));
return 0;
}
.set_property = armada_drm_crtc_set_property,
};
+static const struct drm_plane_funcs armada_primary_plane_funcs = {
+ .update_plane = drm_primary_helper_update,
+ .disable_plane = drm_primary_helper_disable,
+ .destroy = drm_primary_helper_destroy,
+};
+
+int armada_drm_plane_init(struct armada_plane *plane)
+{
+ init_waitqueue_head(&plane->frame_wait);
+
+ return 0;
+}
+
static struct drm_prop_enum_list armada_drm_csc_yuv_enum_list[] = {
{ CSC_AUTO, "Auto" },
{ CSC_YUV_CCIR601, "CCIR601" },
return 0;
}
-int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
+static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
struct resource *res, int irq, const struct armada_variant *variant,
struct device_node *port)
{
struct armada_private *priv = drm->dev_private;
struct armada_crtc *dcrtc;
+ struct armada_plane *primary;
void __iomem *base;
int ret;
dcrtc->spu_iopad_ctrl = CFG_VSCALE_LN_EN | CFG_IOPAD_DUMB24;
spin_lock_init(&dcrtc->irq_lock);
dcrtc->irq_ena = CLEAN_SPU_IRQ_ISR;
- INIT_LIST_HEAD(&dcrtc->vbl_list);
- init_waitqueue_head(&dcrtc->frame_wait);
/* Initialize some registers which we don't otherwise set */
writel_relaxed(0x00000001, dcrtc->base + LCD_CFG_SCLK_DIV);
priv->dcrtc[dcrtc->num] = dcrtc;
dcrtc->crtc.port = port;
- drm_crtc_init(drm, &dcrtc->crtc, &armada_crtc_funcs);
+
+ primary = kzalloc(sizeof(*primary), GFP_KERNEL);
+ if (!primary)
+ return -ENOMEM;
+
+ ret = armada_drm_plane_init(primary);
+ if (ret) {
+ kfree(primary);
+ return ret;
+ }
+
+ ret = drm_universal_plane_init(drm, &primary->base, 0,
+ &armada_primary_plane_funcs,
+ armada_primary_formats,
+ ARRAY_SIZE(armada_primary_formats),
+ DRM_PLANE_TYPE_PRIMARY);
+ if (ret) {
+ kfree(primary);
+ return ret;
+ }
+
+ ret = drm_crtc_init_with_planes(drm, &dcrtc->crtc, &primary->base, NULL,
+ &armada_crtc_funcs);
+ if (ret)
+ goto err_crtc_init;
+
drm_crtc_helper_add(&dcrtc->crtc, &armada_crtc_helper_funcs);
drm_object_attach_property(&dcrtc->crtc.base, priv->csc_yuv_prop,
dcrtc->csc_rgb_mode);
return armada_overlay_plane_create(drm, 1 << dcrtc->num);
+
+err_crtc_init:
+ primary->base.funcs->destroy(&primary->base);
+ return ret;
}
static int
#define armada_reg_queue_end(_r, _i) \
armada_reg_queue_mod(_r, _i, 0, 0, ~0)
-struct armada_frame_work;
+struct armada_crtc;
+struct armada_plane;
struct armada_variant;
+struct armada_plane_work {
+ void (*fn)(struct armada_crtc *,
+ struct armada_plane *,
+ struct armada_plane_work *);
+};
+
+struct armada_plane {
+ struct drm_plane base;
+ wait_queue_head_t frame_wait;
+ struct armada_plane_work *work;
+};
+#define drm_to_armada_plane(p) container_of(p, struct armada_plane, base)
+
+int armada_drm_plane_init(struct armada_plane *plane);
+int armada_drm_plane_work_queue(struct armada_crtc *dcrtc,
+ struct armada_plane *plane, struct armada_plane_work *work);
+int armada_drm_plane_work_wait(struct armada_plane *plane, long timeout);
+struct armada_plane_work *armada_drm_plane_work_cancel(
+ struct armada_crtc *dcrtc, struct armada_plane *plane);
+
struct armada_crtc {
struct drm_crtc crtc;
const struct armada_variant *variant;
uint32_t dumb_ctrl;
uint32_t spu_iopad_ctrl;
- wait_queue_head_t frame_wait;
- struct armada_frame_work *frame_work;
-
spinlock_t irq_lock;
uint32_t irq_ena;
- struct list_head vbl_list;
};
#define drm_to_armada_crtc(c) container_of(c, struct armada_crtc, crtc)
-struct device_node;
-int armada_drm_crtc_create(struct drm_device *, struct device *,
- struct resource *, int, const struct armada_variant *,
- struct device_node *);
void armada_drm_crtc_gamma_set(struct drm_crtc *, u16, u16, u16, int);
void armada_drm_crtc_gamma_get(struct drm_crtc *, u16 *, u16 *, u16 *, int);
void armada_drm_crtc_disable_irq(struct armada_crtc *, u32);
void armada_drm_crtc_enable_irq(struct armada_crtc *, u32);
void armada_drm_crtc_update_regs(struct armada_crtc *, struct armada_regs *);
+void armada_drm_crtc_plane_disable(struct armada_crtc *dcrtc,
+ struct drm_plane *plane);
+
extern struct platform_driver armada_lcd_platform_driver;
#endif
return ALIGN(pitch, 128);
}
-struct armada_vbl_event {
- struct list_head node;
- void *data;
- void (*fn)(struct armada_crtc *, void *);
-};
-void armada_drm_vbl_event_add(struct armada_crtc *,
- struct armada_vbl_event *);
-void armada_drm_vbl_event_remove(struct armada_crtc *,
- struct armada_vbl_event *);
-#define armada_drm_vbl_event_init(_e, _f, _d) do { \
- struct armada_vbl_event *__e = _e; \
- INIT_LIST_HEAD(&__e->node); \
- __e->data = _d; \
- __e->fn = _f; \
-} while (0)
-
struct armada_private;
#include <drm/armada_drm.h>
#include "armada_ioctlP.h"
-#ifdef CONFIG_DRM_ARMADA_TDA1998X
-#include <drm/i2c/tda998x.h>
-#include "armada_slave.h"
-
-static struct tda998x_encoder_params params = {
- /* With 0x24, there is no translation between vp_out and int_vp
- FB LCD out Pins VIP Int Vp
- R:23:16 R:7:0 VPC7:0 7:0 7:0[R]
- G:15:8 G:15:8 VPB7:0 23:16 23:16[G]
- B:7:0 B:23:16 VPA7:0 15:8 15:8[B]
- */
- .swap_a = 2,
- .swap_b = 3,
- .swap_c = 4,
- .swap_d = 5,
- .swap_e = 0,
- .swap_f = 1,
- .audio_cfg = BIT(2),
- .audio_frame[1] = 1,
- .audio_format = AFMT_SPDIF,
- .audio_sample_rate = 44100,
-};
-
-static const struct armada_drm_slave_config tda19988_config = {
- .i2c_adapter_id = 0,
- .crtcs = 1 << 0, /* Only LCD0 at the moment */
- .polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT,
- .interlace_allowed = true,
- .info = {
- .type = "tda998x",
- .addr = 0x70,
- .platform_data = ¶ms,
- },
-};
-#endif
-
-static bool is_componentized(struct device *dev)
-{
- return dev->of_node || dev->platform_data;
-}
-
static void armada_drm_unref_work(struct work_struct *work)
{
struct armada_private *priv =
static int armada_drm_load(struct drm_device *dev, unsigned long flags)
{
- const struct platform_device_id *id;
- const struct armada_variant *variant;
struct armada_private *priv;
- struct resource *res[ARRAY_SIZE(priv->dcrtc)];
struct resource *mem = NULL;
- int ret, n, i;
-
- memset(res, 0, sizeof(res));
+ int ret, n;
- for (n = i = 0; ; n++) {
+ for (n = 0; ; n++) {
struct resource *r = platform_get_resource(dev->platformdev,
IORESOURCE_MEM, n);
if (!r)
/* Resources above 64K are graphics memory */
if (resource_size(r) > SZ_64K)
mem = r;
- else if (i < ARRAY_SIZE(priv->dcrtc))
- res[i++] = r;
else
return -EINVAL;
}
platform_set_drvdata(dev->platformdev, dev);
dev->dev_private = priv;
- /* Get the implementation specific driver data. */
- id = platform_get_device_id(dev->platformdev);
- if (!id)
- return -ENXIO;
-
- variant = (const struct armada_variant *)id->driver_data;
-
INIT_WORK(&priv->fb_unref_work, armada_drm_unref_work);
INIT_KFIFO(priv->fb_unref);
dev->mode_config.funcs = &armada_drm_mode_config_funcs;
drm_mm_init(&priv->linear, mem->start, resource_size(mem));
- /* Create all LCD controllers */
- for (n = 0; n < ARRAY_SIZE(priv->dcrtc); n++) {
- int irq;
-
- if (!res[n])
- break;
-
- irq = platform_get_irq(dev->platformdev, n);
- if (irq < 0)
- goto err_kms;
-
- ret = armada_drm_crtc_create(dev, dev->dev, res[n], irq,
- variant, NULL);
- if (ret)
- goto err_kms;
- }
-
- if (is_componentized(dev->dev)) {
- ret = component_bind_all(dev->dev, dev);
- if (ret)
- goto err_kms;
- } else {
-#ifdef CONFIG_DRM_ARMADA_TDA1998X
- ret = armada_drm_connector_slave_create(dev, &tda19988_config);
- if (ret)
- goto err_kms;
-#endif
- }
+ ret = component_bind_all(dev->dev, dev);
+ if (ret)
+ goto err_kms;
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret)
return 0;
err_comp:
- if (is_componentized(dev->dev))
- component_unbind_all(dev->dev, dev);
+ component_unbind_all(dev->dev, dev);
err_kms:
drm_mode_config_cleanup(dev);
drm_mm_takedown(&priv->linear);
drm_kms_helper_poll_fini(dev);
armada_fbdev_fini(dev);
- if (is_componentized(dev->dev))
- component_unbind_all(dev->dev, dev);
+ component_unbind_all(dev->dev, dev);
drm_mode_config_cleanup(dev);
drm_mm_takedown(&priv->linear);
return 0;
}
-void armada_drm_vbl_event_add(struct armada_crtc *dcrtc,
- struct armada_vbl_event *evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dcrtc->irq_lock, flags);
- if (list_empty(&evt->node)) {
- list_add_tail(&evt->node, &dcrtc->vbl_list);
-
- drm_vblank_get(dcrtc->crtc.dev, dcrtc->num);
- }
- spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
-}
-
-void armada_drm_vbl_event_remove(struct armada_crtc *dcrtc,
- struct armada_vbl_event *evt)
-{
- if (!list_empty(&evt->node)) {
- list_del_init(&evt->node);
- drm_vblank_put(dcrtc->crtc.dev, dcrtc->num);
- }
-}
-
/* These are called under the vbl_lock. */
static int armada_drm_enable_vblank(struct drm_device *dev, int crtc)
{
static int armada_drm_probe(struct platform_device *pdev)
{
- if (is_componentized(&pdev->dev)) {
- struct component_match *match = NULL;
- int ret;
-
- ret = armada_drm_find_components(&pdev->dev, &match);
- if (ret < 0)
- return ret;
-
- return component_master_add_with_match(&pdev->dev,
- &armada_master_ops, match);
- } else {
- return drm_platform_init(&armada_drm_driver, pdev);
- }
+ struct component_match *match = NULL;
+ int ret;
+
+ ret = armada_drm_find_components(&pdev->dev, &match);
+ if (ret < 0)
+ return ret;
+
+ return component_master_add_with_match(&pdev->dev, &armada_master_ops,
+ match);
}
static int armada_drm_remove(struct platform_device *pdev)
{
- if (is_componentized(&pdev->dev))
- component_master_del(&pdev->dev, &armada_master_ops);
- else
- drm_put_dev(platform_get_drvdata(pdev));
+ component_master_del(&pdev->dev, &armada_master_ops);
return 0;
}
static const struct platform_device_id armada_drm_platform_ids[] = {
{
.name = "armada-drm",
- .driver_data = (unsigned long)&armada510_ops,
}, {
.name = "armada-510-drm",
- .driver_data = (unsigned long)&armada510_ops,
},
{ },
};
+++ /dev/null
-/*
- * Copyright (C) 2012 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_edid.h>
-#include <drm/drm_encoder_slave.h>
-#include "armada_output.h"
-#include "armada_drm.h"
-
-struct armada_connector {
- struct drm_connector conn;
- const struct armada_output_type *type;
-};
-
-#define drm_to_armada_conn(c) container_of(c, struct armada_connector, conn)
-
-struct drm_encoder *armada_drm_connector_encoder(struct drm_connector *conn)
-{
- struct drm_encoder *enc = conn->encoder;
-
- return enc ? enc : drm_encoder_find(conn->dev, conn->encoder_ids[0]);
-}
-
-static enum drm_connector_status armada_drm_connector_detect(
- struct drm_connector *conn, bool force)
-{
- struct armada_connector *dconn = drm_to_armada_conn(conn);
- enum drm_connector_status status = connector_status_disconnected;
-
- if (dconn->type->detect) {
- status = dconn->type->detect(conn, force);
- } else {
- struct drm_encoder *enc = armada_drm_connector_encoder(conn);
-
- if (enc)
- status = encoder_helper_funcs(enc)->detect(enc, conn);
- }
-
- return status;
-}
-
-static void armada_drm_connector_destroy(struct drm_connector *conn)
-{
- struct armada_connector *dconn = drm_to_armada_conn(conn);
-
- drm_connector_unregister(conn);
- drm_connector_cleanup(conn);
- kfree(dconn);
-}
-
-static int armada_drm_connector_set_property(struct drm_connector *conn,
- struct drm_property *property, uint64_t value)
-{
- struct armada_connector *dconn = drm_to_armada_conn(conn);
-
- if (!dconn->type->set_property)
- return -EINVAL;
-
- return dconn->type->set_property(conn, property, value);
-}
-
-static const struct drm_connector_funcs armada_drm_conn_funcs = {
- .dpms = drm_helper_connector_dpms,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .detect = armada_drm_connector_detect,
- .destroy = armada_drm_connector_destroy,
- .set_property = armada_drm_connector_set_property,
-};
-
-/* Shouldn't this be a generic helper function? */
-int armada_drm_slave_encoder_mode_valid(struct drm_connector *conn,
- struct drm_display_mode *mode)
-{
- struct drm_encoder *encoder = armada_drm_connector_encoder(conn);
- int valid = MODE_BAD;
-
- if (encoder) {
- struct drm_encoder_slave *slave = to_encoder_slave(encoder);
-
- valid = slave->slave_funcs->mode_valid(encoder, mode);
- }
- return valid;
-}
-
-int armada_drm_slave_encoder_set_property(struct drm_connector *conn,
- struct drm_property *property, uint64_t value)
-{
- struct drm_encoder *encoder = armada_drm_connector_encoder(conn);
- int rc = -EINVAL;
-
- if (encoder) {
- struct drm_encoder_slave *slave = to_encoder_slave(encoder);
-
- rc = slave->slave_funcs->set_property(encoder, conn, property,
- value);
- }
- return rc;
-}
-
-int armada_output_create(struct drm_device *dev,
- const struct armada_output_type *type, const void *data)
-{
- struct armada_connector *dconn;
- int ret;
-
- dconn = kzalloc(sizeof(*dconn), GFP_KERNEL);
- if (!dconn)
- return -ENOMEM;
-
- dconn->type = type;
-
- ret = drm_connector_init(dev, &dconn->conn, &armada_drm_conn_funcs,
- type->connector_type);
- if (ret) {
- DRM_ERROR("unable to init connector\n");
- goto err_destroy_dconn;
- }
-
- ret = type->create(&dconn->conn, data);
- if (ret)
- goto err_conn;
-
- ret = drm_connector_register(&dconn->conn);
- if (ret)
- goto err_sysfs;
-
- return 0;
-
- err_sysfs:
- if (dconn->conn.encoder)
- dconn->conn.encoder->funcs->destroy(dconn->conn.encoder);
- err_conn:
- drm_connector_cleanup(&dconn->conn);
- err_destroy_dconn:
- kfree(dconn);
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (C) 2012 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ARMADA_CONNETOR_H
-#define ARMADA_CONNETOR_H
-
-#define encoder_helper_funcs(encoder) \
- ((const struct drm_encoder_helper_funcs *)encoder->helper_private)
-
-struct armada_output_type {
- int connector_type;
- enum drm_connector_status (*detect)(struct drm_connector *, bool);
- int (*create)(struct drm_connector *, const void *);
- int (*set_property)(struct drm_connector *, struct drm_property *,
- uint64_t);
-};
-
-struct drm_encoder *armada_drm_connector_encoder(struct drm_connector *conn);
-
-int armada_drm_slave_encoder_mode_valid(struct drm_connector *conn,
- struct drm_display_mode *mode);
-
-int armada_drm_slave_encoder_set_property(struct drm_connector *conn,
- struct drm_property *property, uint64_t value);
-
-int armada_output_create(struct drm_device *dev,
- const struct armada_output_type *type, const void *data);
-
-#endif
#include <drm/armada_drm.h>
#include "armada_ioctlP.h"
-struct armada_plane_properties {
+struct armada_ovl_plane_properties {
uint32_t colorkey_yr;
uint32_t colorkey_ug;
uint32_t colorkey_vb;
uint32_t colorkey_mode;
};
-struct armada_plane {
- struct drm_plane base;
- spinlock_t lock;
+struct armada_ovl_plane {
+ struct armada_plane base;
struct drm_framebuffer *old_fb;
uint32_t src_hw;
uint32_t dst_hw;
uint32_t dst_yx;
uint32_t ctrl0;
struct {
- struct armada_vbl_event update;
+ struct armada_plane_work work;
struct armada_regs regs[13];
- wait_queue_head_t wait;
} vbl;
- struct armada_plane_properties prop;
+ struct armada_ovl_plane_properties prop;
};
-#define drm_to_armada_plane(p) container_of(p, struct armada_plane, base)
+#define drm_to_armada_ovl_plane(p) \
+ container_of(p, struct armada_ovl_plane, base.base)
static void
-armada_ovl_update_attr(struct armada_plane_properties *prop,
+armada_ovl_update_attr(struct armada_ovl_plane_properties *prop,
struct armada_crtc *dcrtc)
{
writel_relaxed(prop->colorkey_yr, dcrtc->base + LCD_SPU_COLORKEY_Y);
spin_unlock_irq(&dcrtc->irq_lock);
}
-/* === Plane support === */
-static void armada_plane_vbl(struct armada_crtc *dcrtc, void *data)
+static void armada_ovl_retire_fb(struct armada_ovl_plane *dplane,
+ struct drm_framebuffer *fb)
{
- struct armada_plane *dplane = data;
- struct drm_framebuffer *fb;
+ struct drm_framebuffer *old_fb;
- armada_drm_crtc_update_regs(dcrtc, dplane->vbl.regs);
+ old_fb = xchg(&dplane->old_fb, fb);
- spin_lock(&dplane->lock);
- fb = dplane->old_fb;
- dplane->old_fb = NULL;
- spin_unlock(&dplane->lock);
+ if (old_fb)
+ armada_drm_queue_unref_work(dplane->base.base.dev, old_fb);
+}
- if (fb)
- armada_drm_queue_unref_work(dcrtc->crtc.dev, fb);
+/* === Plane support === */
+static void armada_ovl_plane_work(struct armada_crtc *dcrtc,
+ struct armada_plane *plane, struct armada_plane_work *work)
+{
+ struct armada_ovl_plane *dplane = container_of(plane, struct armada_ovl_plane, base);
- wake_up(&dplane->vbl.wait);
+ armada_drm_crtc_update_regs(dcrtc, dplane->vbl.regs);
+ armada_ovl_retire_fb(dplane, NULL);
}
static int
-armada_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
+armada_ovl_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y, unsigned crtc_w, unsigned crtc_h,
uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h)
{
- struct armada_plane *dplane = drm_to_armada_plane(plane);
+ struct armada_ovl_plane *dplane = drm_to_armada_ovl_plane(plane);
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct drm_rect src = {
.x1 = src_x,
dcrtc->base + LCD_SPU_SRAM_PARA1);
}
- wait_event_timeout(dplane->vbl.wait,
- list_empty(&dplane->vbl.update.node),
- HZ/25);
+ if (armada_drm_plane_work_wait(&dplane->base, HZ / 25) == 0)
+ armada_drm_plane_work_cancel(dcrtc, &dplane->base);
if (plane->fb != fb) {
struct armada_gem_object *obj = drm_fb_obj(fb);
*/
drm_framebuffer_reference(fb);
- if (plane->fb) {
- struct drm_framebuffer *older_fb;
-
- spin_lock_irq(&dplane->lock);
- older_fb = dplane->old_fb;
- dplane->old_fb = plane->fb;
- spin_unlock_irq(&dplane->lock);
- if (older_fb)
- armada_drm_queue_unref_work(dcrtc->crtc.dev,
- older_fb);
- }
+ if (plane->fb)
+ armada_ovl_retire_fb(dplane, plane->fb);
src_y = src.y1 >> 16;
src_x = src.x1 >> 16;
}
if (idx) {
armada_reg_queue_end(dplane->vbl.regs, idx);
- armada_drm_vbl_event_add(dcrtc, &dplane->vbl.update);
+ armada_drm_plane_work_queue(dcrtc, &dplane->base,
+ &dplane->vbl.work);
}
return 0;
}
-static int armada_plane_disable(struct drm_plane *plane)
+static int armada_ovl_plane_disable(struct drm_plane *plane)
{
- struct armada_plane *dplane = drm_to_armada_plane(plane);
+ struct armada_ovl_plane *dplane = drm_to_armada_ovl_plane(plane);
struct drm_framebuffer *fb;
struct armada_crtc *dcrtc;
- if (!dplane->base.crtc)
+ if (!dplane->base.base.crtc)
return 0;
- dcrtc = drm_to_armada_crtc(dplane->base.crtc);
- dcrtc->plane = NULL;
-
- spin_lock_irq(&dcrtc->irq_lock);
- armada_drm_vbl_event_remove(dcrtc, &dplane->vbl.update);
- armada_updatel(0, CFG_DMA_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0);
- dplane->ctrl0 = 0;
- spin_unlock_irq(&dcrtc->irq_lock);
+ dcrtc = drm_to_armada_crtc(dplane->base.base.crtc);
- /* Power down the Y/U/V FIFOs */
- armada_updatel(CFG_PDWN16x66 | CFG_PDWN32x66, 0,
- dcrtc->base + LCD_SPU_SRAM_PARA1);
+ armada_drm_plane_work_cancel(dcrtc, &dplane->base);
+ armada_drm_crtc_plane_disable(dcrtc, plane);
- if (plane->fb)
- drm_framebuffer_unreference(plane->fb);
+ dcrtc->plane = NULL;
+ dplane->ctrl0 = 0;
- spin_lock_irq(&dplane->lock);
- fb = dplane->old_fb;
- dplane->old_fb = NULL;
- spin_unlock_irq(&dplane->lock);
+ fb = xchg(&dplane->old_fb, NULL);
if (fb)
drm_framebuffer_unreference(fb);
return 0;
}
-static void armada_plane_destroy(struct drm_plane *plane)
+static void armada_ovl_plane_destroy(struct drm_plane *plane)
{
- struct armada_plane *dplane = drm_to_armada_plane(plane);
+ struct armada_ovl_plane *dplane = drm_to_armada_ovl_plane(plane);
drm_plane_cleanup(plane);
kfree(dplane);
}
-static int armada_plane_set_property(struct drm_plane *plane,
+static int armada_ovl_plane_set_property(struct drm_plane *plane,
struct drm_property *property, uint64_t val)
{
struct armada_private *priv = plane->dev->dev_private;
- struct armada_plane *dplane = drm_to_armada_plane(plane);
+ struct armada_ovl_plane *dplane = drm_to_armada_ovl_plane(plane);
bool update_attr = false;
if (property == priv->colorkey_prop) {
update_attr = true;
}
- if (update_attr && dplane->base.crtc)
+ if (update_attr && dplane->base.base.crtc)
armada_ovl_update_attr(&dplane->prop,
- drm_to_armada_crtc(dplane->base.crtc));
+ drm_to_armada_crtc(dplane->base.base.crtc));
return 0;
}
-static const struct drm_plane_funcs armada_plane_funcs = {
- .update_plane = armada_plane_update,
- .disable_plane = armada_plane_disable,
- .destroy = armada_plane_destroy,
- .set_property = armada_plane_set_property,
+static const struct drm_plane_funcs armada_ovl_plane_funcs = {
+ .update_plane = armada_ovl_plane_update,
+ .disable_plane = armada_ovl_plane_disable,
+ .destroy = armada_ovl_plane_destroy,
+ .set_property = armada_ovl_plane_set_property,
};
-static const uint32_t armada_formats[] = {
+static const uint32_t armada_ovl_formats[] = {
DRM_FORMAT_UYVY,
DRM_FORMAT_YUYV,
DRM_FORMAT_YUV420,
{
struct armada_private *priv = dev->dev_private;
struct drm_mode_object *mobj;
- struct armada_plane *dplane;
+ struct armada_ovl_plane *dplane;
int ret;
ret = armada_overlay_create_properties(dev);
if (!dplane)
return -ENOMEM;
- spin_lock_init(&dplane->lock);
- init_waitqueue_head(&dplane->vbl.wait);
- armada_drm_vbl_event_init(&dplane->vbl.update, armada_plane_vbl,
- dplane);
+ ret = armada_drm_plane_init(&dplane->base);
+ if (ret) {
+ kfree(dplane);
+ return ret;
+ }
+
+ dplane->vbl.work.fn = armada_ovl_plane_work;
- drm_plane_init(dev, &dplane->base, crtcs, &armada_plane_funcs,
- armada_formats, ARRAY_SIZE(armada_formats), false);
+ ret = drm_universal_plane_init(dev, &dplane->base.base, crtcs,
+ &armada_ovl_plane_funcs,
+ armada_ovl_formats,
+ ARRAY_SIZE(armada_ovl_formats),
+ DRM_PLANE_TYPE_OVERLAY);
+ if (ret) {
+ kfree(dplane);
+ return ret;
+ }
dplane->prop.colorkey_yr = 0xfefefe00;
dplane->prop.colorkey_ug = 0x01010100;
dplane->prop.contrast = 0x4000;
dplane->prop.saturation = 0x4000;
- mobj = &dplane->base.base;
+ mobj = &dplane->base.base.base;
drm_object_attach_property(mobj, priv->colorkey_prop,
0x0101fe);
drm_object_attach_property(mobj, priv->colorkey_min_prop,
+++ /dev/null
-/*
- * Copyright (C) 2012 Russell King
- * Rewritten from the dovefb driver, and Armada510 manuals.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_edid.h>
-#include <drm/drm_encoder_slave.h>
-#include "armada_drm.h"
-#include "armada_output.h"
-#include "armada_slave.h"
-
-static int armada_drm_slave_get_modes(struct drm_connector *conn)
-{
- struct drm_encoder *enc = armada_drm_connector_encoder(conn);
- int count = 0;
-
- if (enc) {
- struct drm_encoder_slave *slave = to_encoder_slave(enc);
-
- count = slave->slave_funcs->get_modes(enc, conn);
- }
-
- return count;
-}
-
-static void armada_drm_slave_destroy(struct drm_encoder *enc)
-{
- struct drm_encoder_slave *slave = to_encoder_slave(enc);
- struct i2c_client *client = drm_i2c_encoder_get_client(enc);
-
- if (slave->slave_funcs)
- slave->slave_funcs->destroy(enc);
- if (client)
- i2c_put_adapter(client->adapter);
-
- drm_encoder_cleanup(&slave->base);
- kfree(slave);
-}
-
-static const struct drm_encoder_funcs armada_drm_slave_encoder_funcs = {
- .destroy = armada_drm_slave_destroy,
-};
-
-static const struct drm_connector_helper_funcs armada_drm_slave_helper_funcs = {
- .get_modes = armada_drm_slave_get_modes,
- .mode_valid = armada_drm_slave_encoder_mode_valid,
- .best_encoder = armada_drm_connector_encoder,
-};
-
-static const struct drm_encoder_helper_funcs drm_slave_encoder_helpers = {
- .dpms = drm_i2c_encoder_dpms,
- .save = drm_i2c_encoder_save,
- .restore = drm_i2c_encoder_restore,
- .mode_fixup = drm_i2c_encoder_mode_fixup,
- .prepare = drm_i2c_encoder_prepare,
- .commit = drm_i2c_encoder_commit,
- .mode_set = drm_i2c_encoder_mode_set,
- .detect = drm_i2c_encoder_detect,
-};
-
-static int
-armada_drm_conn_slave_create(struct drm_connector *conn, const void *data)
-{
- const struct armada_drm_slave_config *config = data;
- struct drm_encoder_slave *slave;
- struct i2c_adapter *adap;
- int ret;
-
- conn->interlace_allowed = config->interlace_allowed;
- conn->doublescan_allowed = config->doublescan_allowed;
- conn->polled = config->polled;
-
- drm_connector_helper_add(conn, &armada_drm_slave_helper_funcs);
-
- slave = kzalloc(sizeof(*slave), GFP_KERNEL);
- if (!slave)
- return -ENOMEM;
-
- slave->base.possible_crtcs = config->crtcs;
-
- adap = i2c_get_adapter(config->i2c_adapter_id);
- if (!adap) {
- kfree(slave);
- return -EPROBE_DEFER;
- }
-
- ret = drm_encoder_init(conn->dev, &slave->base,
- &armada_drm_slave_encoder_funcs,
- DRM_MODE_ENCODER_TMDS);
- if (ret) {
- DRM_ERROR("unable to init encoder\n");
- i2c_put_adapter(adap);
- kfree(slave);
- return ret;
- }
-
- ret = drm_i2c_encoder_init(conn->dev, slave, adap, &config->info);
- i2c_put_adapter(adap);
- if (ret) {
- DRM_ERROR("unable to init encoder slave\n");
- armada_drm_slave_destroy(&slave->base);
- return ret;
- }
-
- drm_encoder_helper_add(&slave->base, &drm_slave_encoder_helpers);
-
- ret = slave->slave_funcs->create_resources(&slave->base, conn);
- if (ret) {
- armada_drm_slave_destroy(&slave->base);
- return ret;
- }
-
- ret = drm_mode_connector_attach_encoder(conn, &slave->base);
- if (ret) {
- armada_drm_slave_destroy(&slave->base);
- return ret;
- }
-
- conn->encoder = &slave->base;
-
- return ret;
-}
-
-static const struct armada_output_type armada_drm_conn_slave = {
- .connector_type = DRM_MODE_CONNECTOR_HDMIA,
- .create = armada_drm_conn_slave_create,
- .set_property = armada_drm_slave_encoder_set_property,
-};
-
-int armada_drm_connector_slave_create(struct drm_device *dev,
- const struct armada_drm_slave_config *config)
-{
- return armada_output_create(dev, &armada_drm_conn_slave, config);
-}
+++ /dev/null
-/*
- * Copyright (C) 2012 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ARMADA_SLAVE_H
-#define ARMADA_SLAVE_H
-
-#include <linux/i2c.h>
-#include <drm/drmP.h>
-
-struct armada_drm_slave_config {
- int i2c_adapter_id;
- uint32_t crtcs;
- uint8_t polled;
- bool interlace_allowed;
- bool doublescan_allowed;
- struct i2c_board_info info;
-};
-
-int armada_drm_connector_slave_create(struct drm_device *dev,
- const struct armada_drm_slave_config *);
-
-#endif
tristate
select DRM_KMS_HELPER
+config DRM_DW_HDMI_AHB_AUDIO
+ tristate "Synopsis Designware AHB Audio interface"
+ depends on DRM_DW_HDMI && SND
+ select SND_PCM
+ select SND_PCM_ELD
+ select SND_PCM_IEC958
+ help
+ Support the AHB Audio interface which is part of the Synopsis
+ Designware HDMI block. This is used in conjunction with
+ the i.MX6 HDMI driver.
+
+
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
depends on OF
ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
+obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
--- /dev/null
+/*
+ * DesignWare HDMI audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written and tested against the Designware HDMI Tx found in iMX6.
+ */
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_edid.h>
+
+#include <sound/asoundef.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_drm_eld.h>
+#include <sound/pcm_iec958.h>
+
+#include "dw_hdmi-audio.h"
+
+#define DRIVER_NAME "dw-hdmi-ahb-audio"
+
+/* Provide some bits rather than bit offsets */
+enum {
+ HDMI_AHB_DMA_CONF0_SW_FIFO_RST = BIT(7),
+ HDMI_AHB_DMA_CONF0_EN_HLOCK = BIT(3),
+ HDMI_AHB_DMA_START_START = BIT(0),
+ HDMI_AHB_DMA_STOP_STOP = BIT(0),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = BIT(5),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = BIT(4),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = BIT(3),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = BIT(2),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL =
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR |
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST |
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY |
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE |
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL |
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY,
+ HDMI_IH_AHBDMAAUD_STAT0_ERROR = BIT(5),
+ HDMI_IH_AHBDMAAUD_STAT0_LOST = BIT(4),
+ HDMI_IH_AHBDMAAUD_STAT0_RETRY = BIT(3),
+ HDMI_IH_AHBDMAAUD_STAT0_DONE = BIT(2),
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
+ HDMI_IH_AHBDMAAUD_STAT0_ALL =
+ HDMI_IH_AHBDMAAUD_STAT0_ERROR |
+ HDMI_IH_AHBDMAAUD_STAT0_LOST |
+ HDMI_IH_AHBDMAAUD_STAT0_RETRY |
+ HDMI_IH_AHBDMAAUD_STAT0_DONE |
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL |
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY,
+ HDMI_AHB_DMA_CONF0_INCR16 = 2 << 1,
+ HDMI_AHB_DMA_CONF0_INCR8 = 1 << 1,
+ HDMI_AHB_DMA_CONF0_INCR4 = 0,
+ HDMI_AHB_DMA_CONF0_BURST_MODE = BIT(0),
+ HDMI_AHB_DMA_MASK_DONE = BIT(7),
+
+ HDMI_REVISION_ID = 0x0001,
+ HDMI_IH_AHBDMAAUD_STAT0 = 0x0109,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0 = 0x0189,
+ HDMI_FC_AUDICONF2 = 0x1027,
+ HDMI_FC_AUDSCONF = 0x1063,
+ HDMI_FC_AUDSCONF_LAYOUT1 = 1 << 0,
+ HDMI_FC_AUDSCONF_LAYOUT0 = 0 << 0,
+ HDMI_AHB_DMA_CONF0 = 0x3600,
+ HDMI_AHB_DMA_START = 0x3601,
+ HDMI_AHB_DMA_STOP = 0x3602,
+ HDMI_AHB_DMA_THRSLD = 0x3603,
+ HDMI_AHB_DMA_STRADDR0 = 0x3604,
+ HDMI_AHB_DMA_STPADDR0 = 0x3608,
+ HDMI_AHB_DMA_MASK = 0x3614,
+ HDMI_AHB_DMA_POL = 0x3615,
+ HDMI_AHB_DMA_CONF1 = 0x3616,
+ HDMI_AHB_DMA_BUFFPOL = 0x361a,
+};
+
+struct dw_hdmi_channel_conf {
+ u8 conf1;
+ u8 ca;
+};
+
+/*
+ * The default mapping of ALSA channels to HDMI channels and speaker
+ * allocation bits. Note that we can't do channel remapping here -
+ * channels must be in the same order.
+ *
+ * Mappings for alsa-lib pcm/surround*.conf files:
+ *
+ * Front Sur4.0 Sur4.1 Sur5.0 Sur5.1 Sur7.1
+ * Channels 2 4 6 6 6 8
+ *
+ * Our mapping from ALSA channel to CEA686D speaker name and HDMI channel:
+ *
+ * Number of ALSA channels
+ * ALSA Channel 2 3 4 5 6 7 8
+ * 0 FL:0 = = = = = =
+ * 1 FR:1 = = = = = =
+ * 2 FC:3 RL:4 LFE:2 = = =
+ * 3 RR:5 RL:4 FC:3 = =
+ * 4 RR:5 RL:4 = =
+ * 5 RR:5 = =
+ * 6 RC:6 =
+ * 7 RLC/FRC RLC/FRC
+ */
+static struct dw_hdmi_channel_conf default_hdmi_channel_config[7] = {
+ { 0x03, 0x00 }, /* FL,FR */
+ { 0x0b, 0x02 }, /* FL,FR,FC */
+ { 0x33, 0x08 }, /* FL,FR,RL,RR */
+ { 0x37, 0x09 }, /* FL,FR,LFE,RL,RR */
+ { 0x3f, 0x0b }, /* FL,FR,LFE,FC,RL,RR */
+ { 0x7f, 0x0f }, /* FL,FR,LFE,FC,RL,RR,RC */
+ { 0xff, 0x13 }, /* FL,FR,LFE,FC,RL,RR,[FR]RC,[FR]LC */
+};
+
+struct snd_dw_hdmi {
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ spinlock_t lock;
+ struct dw_hdmi_audio_data data;
+ struct snd_pcm_substream *substream;
+ void (*reformat)(struct snd_dw_hdmi *, size_t, size_t);
+ void *buf_src;
+ void *buf_dst;
+ dma_addr_t buf_addr;
+ unsigned buf_offset;
+ unsigned buf_period;
+ unsigned buf_size;
+ unsigned channels;
+ u8 revision;
+ u8 iec_offset;
+ u8 cs[192][8];
+};
+
+static void dw_hdmi_writel(u32 val, void __iomem *ptr)
+{
+ writeb_relaxed(val, ptr);
+ writeb_relaxed(val >> 8, ptr + 1);
+ writeb_relaxed(val >> 16, ptr + 2);
+ writeb_relaxed(val >> 24, ptr + 3);
+}
+
+/*
+ * Convert to hardware format: The userspace buffer contains IEC958 samples,
+ * with the PCUV bits in bits 31..28 and audio samples in bits 27..4. We
+ * need these to be in bits 27..24, with the IEC B bit in bit 28, and audio
+ * samples in 23..0.
+ *
+ * Default preamble in bits 3..0: 8 = block start, 4 = even 2 = odd
+ *
+ * Ideally, we could do with having the data properly formatted in userspace.
+ */
+static void dw_hdmi_reformat_iec958(struct snd_dw_hdmi *dw,
+ size_t offset, size_t bytes)
+{
+ u32 *src = dw->buf_src + offset;
+ u32 *dst = dw->buf_dst + offset;
+ u32 *end = dw->buf_src + offset + bytes;
+
+ do {
+ u32 b, sample = *src++;
+
+ b = (sample & 8) << (28 - 3);
+
+ sample >>= 4;
+
+ *dst++ = sample | b;
+ } while (src < end);
+}
+
+static u32 parity(u32 sample)
+{
+ sample ^= sample >> 16;
+ sample ^= sample >> 8;
+ sample ^= sample >> 4;
+ sample ^= sample >> 2;
+ sample ^= sample >> 1;
+ return (sample & 1) << 27;
+}
+
+static void dw_hdmi_reformat_s24(struct snd_dw_hdmi *dw,
+ size_t offset, size_t bytes)
+{
+ u32 *src = dw->buf_src + offset;
+ u32 *dst = dw->buf_dst + offset;
+ u32 *end = dw->buf_src + offset + bytes;
+
+ do {
+ unsigned i;
+ u8 *cs;
+
+ cs = dw->cs[dw->iec_offset++];
+ if (dw->iec_offset >= 192)
+ dw->iec_offset = 0;
+
+ i = dw->channels;
+ do {
+ u32 sample = *src++;
+
+ sample &= ~0xff000000;
+ sample |= *cs++ << 24;
+ sample |= parity(sample & ~0xf8000000);
+
+ *dst++ = sample;
+ } while (--i);
+ } while (src < end);
+}
+
+static void dw_hdmi_create_cs(struct snd_dw_hdmi *dw,
+ struct snd_pcm_runtime *runtime)
+{
+ u8 cs[4];
+ unsigned ch, i, j;
+
+ snd_pcm_create_iec958_consumer(runtime, cs, sizeof(cs));
+
+ memset(dw->cs, 0, sizeof(dw->cs));
+
+ for (ch = 0; ch < 8; ch++) {
+ cs[2] &= ~IEC958_AES2_CON_CHANNEL;
+ cs[2] |= (ch + 1) << 4;
+
+ for (i = 0; i < ARRAY_SIZE(cs); i++) {
+ unsigned c = cs[i];
+
+ for (j = 0; j < 8; j++, c >>= 1)
+ dw->cs[i * 8 + j][ch] = (c & 1) << 2;
+ }
+ }
+ dw->cs[0][0] |= BIT(4);
+}
+
+static void dw_hdmi_start_dma(struct snd_dw_hdmi *dw)
+{
+ void __iomem *base = dw->data.base;
+ unsigned offset = dw->buf_offset;
+ unsigned period = dw->buf_period;
+ u32 start, stop;
+
+ dw->reformat(dw, offset, period);
+
+ /* Clear all irqs before enabling irqs and starting DMA */
+ writeb_relaxed(HDMI_IH_AHBDMAAUD_STAT0_ALL,
+ base + HDMI_IH_AHBDMAAUD_STAT0);
+
+ start = dw->buf_addr + offset;
+ stop = start + period - 1;
+
+ /* Setup the hardware start/stop addresses */
+ dw_hdmi_writel(start, base + HDMI_AHB_DMA_STRADDR0);
+ dw_hdmi_writel(stop, base + HDMI_AHB_DMA_STPADDR0);
+
+ writeb_relaxed((u8)~HDMI_AHB_DMA_MASK_DONE, base + HDMI_AHB_DMA_MASK);
+ writeb(HDMI_AHB_DMA_START_START, base + HDMI_AHB_DMA_START);
+
+ offset += period;
+ if (offset >= dw->buf_size)
+ offset = 0;
+ dw->buf_offset = offset;
+}
+
+static void dw_hdmi_stop_dma(struct snd_dw_hdmi *dw)
+{
+ /* Disable interrupts before disabling DMA */
+ writeb_relaxed(~0, dw->data.base + HDMI_AHB_DMA_MASK);
+ writeb_relaxed(HDMI_AHB_DMA_STOP_STOP, dw->data.base + HDMI_AHB_DMA_STOP);
+}
+
+static irqreturn_t snd_dw_hdmi_irq(int irq, void *data)
+{
+ struct snd_dw_hdmi *dw = data;
+ struct snd_pcm_substream *substream;
+ unsigned stat;
+
+ stat = readb_relaxed(dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
+ if (!stat)
+ return IRQ_NONE;
+
+ writeb_relaxed(stat, dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
+
+ substream = dw->substream;
+ if (stat & HDMI_IH_AHBDMAAUD_STAT0_DONE && substream) {
+ snd_pcm_period_elapsed(substream);
+
+ spin_lock(&dw->lock);
+ if (dw->substream)
+ dw_hdmi_start_dma(dw);
+ spin_unlock(&dw->lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct snd_pcm_hardware dw_hdmi_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID,
+ .formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+ .channels_min = 2,
+ .channels_max = 8,
+ .buffer_bytes_max = 1024 * 1024,
+ .period_bytes_min = 256,
+ .period_bytes_max = 8192, /* ERR004323: must limit to 8k */
+ .periods_min = 2,
+ .periods_max = 16,
+ .fifo_size = 0,
+};
+
+static int dw_hdmi_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_dw_hdmi *dw = substream->private_data;
+ void __iomem *base = dw->data.base;
+ int ret;
+
+ runtime->hw = dw_hdmi_hw;
+
+ ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_pcm_limit_hw_rates(runtime);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ /* Limit the buffer size to the size of the preallocated buffer */
+ ret = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 0, substream->dma_buffer.bytes);
+ if (ret < 0)
+ return ret;
+
+ /* Clear FIFO */
+ writeb_relaxed(HDMI_AHB_DMA_CONF0_SW_FIFO_RST,
+ base + HDMI_AHB_DMA_CONF0);
+
+ /* Configure interrupt polarities */
+ writeb_relaxed(~0, base + HDMI_AHB_DMA_POL);
+ writeb_relaxed(~0, base + HDMI_AHB_DMA_BUFFPOL);
+
+ /* Keep interrupts masked, and clear any pending */
+ writeb_relaxed(~0, base + HDMI_AHB_DMA_MASK);
+ writeb_relaxed(~0, base + HDMI_IH_AHBDMAAUD_STAT0);
+
+ ret = request_irq(dw->data.irq, snd_dw_hdmi_irq, IRQF_SHARED,
+ "dw-hdmi-audio", dw);
+ if (ret)
+ return ret;
+
+ /* Un-mute done interrupt */
+ writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL &
+ ~HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE,
+ base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+
+ return 0;
+}
+
+static int dw_hdmi_close(struct snd_pcm_substream *substream)
+{
+ struct snd_dw_hdmi *dw = substream->private_data;
+
+ /* Mute all interrupts */
+ writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
+ dw->data.base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+
+ free_irq(dw->data.irq, dw);
+
+ return 0;
+}
+
+static int dw_hdmi_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
+}
+
+static int dw_hdmi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ /* Allocate the PCM runtime buffer, which is exposed to userspace. */
+ return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(params));
+}
+
+static int dw_hdmi_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_dw_hdmi *dw = substream->private_data;
+ u8 threshold, conf0, conf1, layout, ca;
+
+ /* Setup as per 3.0.5 FSL 4.1.0 BSP */
+ switch (dw->revision) {
+ case 0x0a:
+ conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
+ HDMI_AHB_DMA_CONF0_INCR4;
+ if (runtime->channels == 2)
+ threshold = 126;
+ else
+ threshold = 124;
+ break;
+ case 0x1a:
+ conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
+ HDMI_AHB_DMA_CONF0_INCR8;
+ threshold = 128;
+ break;
+ default:
+ /* NOTREACHED */
+ return -EINVAL;
+ }
+
+ dw_hdmi_set_sample_rate(dw->data.hdmi, runtime->rate);
+
+ /* Minimum number of bytes in the fifo. */
+ runtime->hw.fifo_size = threshold * 32;
+
+ conf0 |= HDMI_AHB_DMA_CONF0_EN_HLOCK;
+ conf1 = default_hdmi_channel_config[runtime->channels - 2].conf1;
+ ca = default_hdmi_channel_config[runtime->channels - 2].ca;
+
+ /*
+ * For >2 channel PCM audio, we need to select layout 1
+ * and set an appropriate channel map.
+ */
+ if (runtime->channels > 2)
+ layout = HDMI_FC_AUDSCONF_LAYOUT1;
+ else
+ layout = HDMI_FC_AUDSCONF_LAYOUT0;
+
+ writeb_relaxed(threshold, dw->data.base + HDMI_AHB_DMA_THRSLD);
+ writeb_relaxed(conf0, dw->data.base + HDMI_AHB_DMA_CONF0);
+ writeb_relaxed(conf1, dw->data.base + HDMI_AHB_DMA_CONF1);
+ writeb_relaxed(layout, dw->data.base + HDMI_FC_AUDSCONF);
+ writeb_relaxed(ca, dw->data.base + HDMI_FC_AUDICONF2);
+
+ switch (runtime->format) {
+ case SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE:
+ dw->reformat = dw_hdmi_reformat_iec958;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ dw_hdmi_create_cs(dw, runtime);
+ dw->reformat = dw_hdmi_reformat_s24;
+ break;
+ }
+ dw->iec_offset = 0;
+ dw->channels = runtime->channels;
+ dw->buf_src = runtime->dma_area;
+ dw->buf_dst = substream->dma_buffer.area;
+ dw->buf_addr = substream->dma_buffer.addr;
+ dw->buf_period = snd_pcm_lib_period_bytes(substream);
+ dw->buf_size = snd_pcm_lib_buffer_bytes(substream);
+
+ return 0;
+}
+
+static int dw_hdmi_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_dw_hdmi *dw = substream->private_data;
+ unsigned long flags;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ spin_lock_irqsave(&dw->lock, flags);
+ dw->buf_offset = 0;
+ dw->substream = substream;
+ dw_hdmi_start_dma(dw);
+ dw_hdmi_audio_enable(dw->data.hdmi);
+ spin_unlock_irqrestore(&dw->lock, flags);
+ substream->runtime->delay = substream->runtime->period_size;
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ spin_lock_irqsave(&dw->lock, flags);
+ dw->substream = NULL;
+ dw_hdmi_stop_dma(dw);
+ dw_hdmi_audio_disable(dw->data.hdmi);
+ spin_unlock_irqrestore(&dw->lock, flags);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t dw_hdmi_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_dw_hdmi *dw = substream->private_data;
+
+ /*
+ * We are unable to report the exact hardware position as
+ * reading the 32-bit DMA position using 8-bit reads is racy.
+ */
+ return bytes_to_frames(runtime, dw->buf_offset);
+}
+
+static struct snd_pcm_ops snd_dw_hdmi_ops = {
+ .open = dw_hdmi_open,
+ .close = dw_hdmi_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dw_hdmi_hw_params,
+ .hw_free = dw_hdmi_hw_free,
+ .prepare = dw_hdmi_prepare,
+ .trigger = dw_hdmi_trigger,
+ .pointer = dw_hdmi_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+};
+
+static int snd_dw_hdmi_probe(struct platform_device *pdev)
+{
+ const struct dw_hdmi_audio_data *data = pdev->dev.platform_data;
+ struct device *dev = pdev->dev.parent;
+ struct snd_dw_hdmi *dw;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ unsigned revision;
+ int ret;
+
+ writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
+ data->base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+ revision = readb_relaxed(data->base + HDMI_REVISION_ID);
+ if (revision != 0x0a && revision != 0x1a) {
+ dev_err(dev, "dw-hdmi-audio: unknown revision 0x%02x\n",
+ revision);
+ return -ENXIO;
+ }
+
+ ret = snd_card_new(dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+ THIS_MODULE, sizeof(struct snd_dw_hdmi), &card);
+ if (ret < 0)
+ return ret;
+
+ strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
+ strlcpy(card->shortname, "DW-HDMI", sizeof(card->shortname));
+ snprintf(card->longname, sizeof(card->longname),
+ "%s rev 0x%02x, irq %d", card->shortname, revision,
+ data->irq);
+
+ dw = card->private_data;
+ dw->card = card;
+ dw->data = *data;
+ dw->revision = revision;
+
+ spin_lock_init(&dw->lock);
+
+ ret = snd_pcm_new(card, "DW HDMI", 0, 1, 0, &pcm);
+ if (ret < 0)
+ goto err;
+
+ dw->pcm = pcm;
+ pcm->private_data = dw;
+ strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dw_hdmi_ops);
+
+ /*
+ * To support 8-channel 96kHz audio reliably, we need 512k
+ * to satisfy alsa with our restricted period (ERR004323).
+ */
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+ dev, 128 * 1024, 1024 * 1024);
+
+ ret = snd_card_register(card);
+ if (ret < 0)
+ goto err;
+
+ platform_set_drvdata(pdev, dw);
+
+ return 0;
+
+err:
+ snd_card_free(card);
+ return ret;
+}
+
+static int snd_dw_hdmi_remove(struct platform_device *pdev)
+{
+ struct snd_dw_hdmi *dw = platform_get_drvdata(pdev);
+
+ snd_card_free(dw->card);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM_SLEEP) && defined(IS_NOT_BROKEN)
+/*
+ * This code is fine, but requires implementation in the dw_hdmi_trigger()
+ * method which is currently missing as I have no way to test this.
+ */
+static int snd_dw_hdmi_suspend(struct device *dev)
+{
+ struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+ snd_power_change_state(dw->card, SNDRV_CTL_POWER_D3cold);
+ snd_pcm_suspend_all(dw->pcm);
+
+ return 0;
+}
+
+static int snd_dw_hdmi_resume(struct device *dev)
+{
+ struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+ snd_power_change_state(dw->card, SNDRV_CTL_POWER_D0);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(snd_dw_hdmi_pm, snd_dw_hdmi_suspend,
+ snd_dw_hdmi_resume);
+#define PM_OPS &snd_dw_hdmi_pm
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver snd_dw_hdmi_driver = {
+ .probe = snd_dw_hdmi_probe,
+ .remove = snd_dw_hdmi_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = PM_OPS,
+ },
+};
+
+module_platform_driver(snd_dw_hdmi_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
+MODULE_DESCRIPTION("Synopsis Designware HDMI AHB ALSA interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--- /dev/null
+#ifndef DW_HDMI_AUDIO_H
+#define DW_HDMI_AUDIO_H
+
+struct dw_hdmi;
+
+struct dw_hdmi_audio_data {
+ phys_addr_t phys;
+ void __iomem *base;
+ int irq;
+ struct dw_hdmi *hdmi;
+ u8 *eld;
+};
+
+#endif
#include <drm/bridge/dw_hdmi.h>
#include "dw_hdmi.h"
+#include "dw_hdmi-audio.h"
#define HDMI_EDID_LEN 512
struct drm_encoder *encoder;
struct drm_bridge *bridge;
+ struct platform_device *audio;
enum dw_hdmi_devtype dev_type;
struct device *dev;
struct clk *isfr_clk;
bool sink_has_audio;
struct mutex mutex; /* for state below and previous_mode */
+ enum drm_connector_force force; /* mutex-protected force state */
bool disabled; /* DRM has disabled our bridge */
+ bool bridge_is_on; /* indicates the bridge is on */
+ bool rxsense; /* rxsense state */
+ u8 phy_mask; /* desired phy int mask settings */
spinlock_t audio_lock;
struct mutex audio_mutex;
unsigned int audio_cts;
unsigned int audio_n;
bool audio_enable;
- int ratio;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
u8 (*read)(struct dw_hdmi *hdmi, int offset);
};
+#define HDMI_IH_PHY_STAT0_RX_SENSE \
+ (HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \
+ HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3)
+
+#define HDMI_PHY_RX_SENSE \
+ (HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
+ HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
+
static void dw_hdmi_writel(struct dw_hdmi *hdmi, u8 val, int offset)
{
writel(val, hdmi->regs + (offset << 2));
hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
}
-static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
- unsigned int ratio)
+static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
{
unsigned int n = (128 * freq) / 1000;
+ unsigned int mult = 1;
+
+ while (freq > 48000) {
+ mult *= 2;
+ freq /= 2;
+ }
switch (freq) {
case 32000:
- if (pixel_clk == 25170000)
- n = (ratio == 150) ? 9152 : 4576;
- else if (pixel_clk == 27020000)
- n = (ratio == 150) ? 8192 : 4096;
- else if (pixel_clk == 74170000 || pixel_clk == 148350000)
+ if (pixel_clk == 25175000)
+ n = 4576;
+ else if (pixel_clk == 27027000)
+ n = 4096;
+ else if (pixel_clk == 74176000 || pixel_clk == 148352000)
n = 11648;
else
n = 4096;
+ n *= mult;
break;
case 44100:
- if (pixel_clk == 25170000)
+ if (pixel_clk == 25175000)
n = 7007;
- else if (pixel_clk == 74170000)
+ else if (pixel_clk == 74176000)
n = 17836;
- else if (pixel_clk == 148350000)
- n = (ratio == 150) ? 17836 : 8918;
+ else if (pixel_clk == 148352000)
+ n = 8918;
else
n = 6272;
+ n *= mult;
break;
case 48000:
- if (pixel_clk == 25170000)
- n = (ratio == 150) ? 9152 : 6864;
- else if (pixel_clk == 27020000)
- n = (ratio == 150) ? 8192 : 6144;
- else if (pixel_clk == 74170000)
+ if (pixel_clk == 25175000)
+ n = 6864;
+ else if (pixel_clk == 27027000)
+ n = 6144;
+ else if (pixel_clk == 74176000)
n = 11648;
- else if (pixel_clk == 148350000)
- n = (ratio == 150) ? 11648 : 5824;
+ else if (pixel_clk == 148352000)
+ n = 5824;
else
n = 6144;
- break;
-
- case 88200:
- n = hdmi_compute_n(44100, pixel_clk, ratio) * 2;
- break;
-
- case 96000:
- n = hdmi_compute_n(48000, pixel_clk, ratio) * 2;
- break;
-
- case 176400:
- n = hdmi_compute_n(44100, pixel_clk, ratio) * 4;
- break;
-
- case 192000:
- n = hdmi_compute_n(48000, pixel_clk, ratio) * 4;
+ n *= mult;
break;
default:
return n;
}
-static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
- unsigned int ratio)
-{
- unsigned int cts = 0;
-
- pr_debug("%s: freq: %d pixel_clk: %ld ratio: %d\n", __func__, freq,
- pixel_clk, ratio);
-
- switch (freq) {
- case 32000:
- if (pixel_clk == 297000000) {
- cts = 222750;
- break;
- }
- case 48000:
- case 96000:
- case 192000:
- switch (pixel_clk) {
- case 25200000:
- case 27000000:
- case 54000000:
- case 74250000:
- case 148500000:
- cts = pixel_clk / 1000;
- break;
- case 297000000:
- cts = 247500;
- break;
- /*
- * All other TMDS clocks are not supported by
- * DWC_hdmi_tx. The TMDS clocks divided or
- * multiplied by 1,001 coefficients are not
- * supported.
- */
- default:
- break;
- }
- break;
- case 44100:
- case 88200:
- case 176400:
- switch (pixel_clk) {
- case 25200000:
- cts = 28000;
- break;
- case 27000000:
- cts = 30000;
- break;
- case 54000000:
- cts = 60000;
- break;
- case 74250000:
- cts = 82500;
- break;
- case 148500000:
- cts = 165000;
- break;
- case 297000000:
- cts = 247500;
- break;
- default:
- break;
- }
- break;
- default:
- break;
- }
- if (ratio == 100)
- return cts;
- return (cts * ratio) / 100;
-}
-
static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
- unsigned long pixel_clk, unsigned int sample_rate, unsigned int ratio)
+ unsigned long pixel_clk, unsigned int sample_rate)
{
+ unsigned long ftdms = pixel_clk;
unsigned int n, cts;
+ u64 tmp;
- n = hdmi_compute_n(sample_rate, pixel_clk, ratio);
- cts = hdmi_compute_cts(sample_rate, pixel_clk, ratio);
- if (!cts) {
- dev_err(hdmi->dev,
- "%s: pixel clock/sample rate not supported: %luMHz / %ukHz\n",
- __func__, pixel_clk, sample_rate);
- }
+ n = hdmi_compute_n(sample_rate, pixel_clk);
+
+ /*
+ * Compute the CTS value from the N value. Note that CTS and N
+ * can be up to 20 bits in total, so we need 64-bit math. Also
+ * note that our TDMS clock is not fully accurate; it is accurate
+ * to kHz. This can introduce an unnecessary remainder in the
+ * calculation below, so we don't try to warn about that.
+ */
+ tmp = (u64)ftdms * n;
+ do_div(tmp, 128 * sample_rate);
+ cts = tmp;
- dev_dbg(hdmi->dev, "%s: samplerate=%ukHz ratio=%d pixelclk=%luMHz N=%d cts=%d\n",
- __func__, sample_rate, ratio, pixel_clk, n, cts);
+ dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n",
+ __func__, sample_rate, ftdms / 1000000, (ftdms / 1000) % 1000,
+ n, cts);
spin_lock_irq(&hdmi->audio_lock);
hdmi->audio_n = n;
static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
{
mutex_lock(&hdmi->audio_mutex);
- hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate,
- hdmi->ratio);
+ hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
{
mutex_lock(&hdmi->audio_mutex);
hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
- hdmi->sample_rate, hdmi->ratio);
+ hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
mutex_lock(&hdmi->audio_mutex);
hdmi->sample_rate = rate;
hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
- hdmi->sample_rate, hdmi->ratio);
+ hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
u8 inv_val;
struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode;
int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len;
+ unsigned int vdisplay;
vmode->mpixelclock = mode->clock * 1000;
hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF);
+ vdisplay = mode->vdisplay;
+ vblank = mode->vtotal - mode->vdisplay;
+ v_de_vs = mode->vsync_start - mode->vdisplay;
+ vsync_len = mode->vsync_end - mode->vsync_start;
+
+ /*
+ * When we're setting an interlaced mode, we need
+ * to adjust the vertical timing to suit.
+ */
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ vdisplay /= 2;
+ vblank /= 2;
+ v_de_vs /= 2;
+ vsync_len /= 2;
+ }
+
/* Set up horizontal active pixel width */
hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1);
hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0);
/* Set up vertical active lines */
- hdmi_writeb(hdmi, mode->vdisplay >> 8, HDMI_FC_INVACTV1);
- hdmi_writeb(hdmi, mode->vdisplay, HDMI_FC_INVACTV0);
+ hdmi_writeb(hdmi, vdisplay >> 8, HDMI_FC_INVACTV1);
+ hdmi_writeb(hdmi, vdisplay, HDMI_FC_INVACTV0);
/* Set up horizontal blanking pixel region width */
hblank = mode->htotal - mode->hdisplay;
hdmi_writeb(hdmi, hblank, HDMI_FC_INHBLANK0);
/* Set up vertical blanking pixel region width */
- vblank = mode->vtotal - mode->vdisplay;
hdmi_writeb(hdmi, vblank, HDMI_FC_INVBLANK);
/* Set up HSYNC active edge delay width (in pixel clks) */
hdmi_writeb(hdmi, h_de_hs, HDMI_FC_HSYNCINDELAY0);
/* Set up VSYNC active edge delay (in lines) */
- v_de_vs = mode->vsync_start - mode->vdisplay;
hdmi_writeb(hdmi, v_de_vs, HDMI_FC_VSYNCINDELAY);
/* Set up HSYNC active pulse width (in pixel clks) */
hdmi_writeb(hdmi, hsync_len, HDMI_FC_HSYNCINWIDTH0);
/* Set up VSYNC active edge delay (in lines) */
- vsync_len = mode->vsync_end - mode->vsync_start;
hdmi_writeb(hdmi, vsync_len, HDMI_FC_VSYNCINWIDTH);
}
HDMI_PHY_I2CM_CTLINT_ADDR);
/* enable cable hot plug irq */
- hdmi_writeb(hdmi, (u8)~HDMI_PHY_HPD, HDMI_PHY_MASK0);
+ hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
/* Clear Hotplug interrupts */
- hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD, HDMI_IH_PHY_STAT0);
+ hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+ HDMI_IH_PHY_STAT0);
return 0;
}
static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
{
+ hdmi->bridge_is_on = true;
dw_hdmi_setup(hdmi, &hdmi->previous_mode);
}
static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
{
dw_hdmi_phy_disable(hdmi);
+ hdmi->bridge_is_on = false;
+}
+
+static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
+{
+ int force = hdmi->force;
+
+ if (hdmi->disabled) {
+ force = DRM_FORCE_OFF;
+ } else if (force == DRM_FORCE_UNSPECIFIED) {
+ if (hdmi->rxsense)
+ force = DRM_FORCE_ON;
+ else
+ force = DRM_FORCE_OFF;
+ }
+
+ if (force == DRM_FORCE_OFF) {
+ if (hdmi->bridge_is_on)
+ dw_hdmi_poweroff(hdmi);
+ } else {
+ if (!hdmi->bridge_is_on)
+ dw_hdmi_poweron(hdmi);
+ }
+}
+
+/*
+ * Adjust the detection of RXSENSE according to whether we have a forced
+ * connection mode enabled, or whether we have been disabled. There is
+ * no point processing RXSENSE interrupts if we have a forced connection
+ * state, or DRM has us disabled.
+ *
+ * We also disable rxsense interrupts when we think we're disconnected
+ * to avoid floating TDMS signals giving false rxsense interrupts.
+ *
+ * Note: we still need to listen for HPD interrupts even when DRM has us
+ * disabled so that we can detect a connect event.
+ */
+static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
+{
+ u8 old_mask = hdmi->phy_mask;
+
+ if (hdmi->force || hdmi->disabled || !hdmi->rxsense)
+ hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
+ else
+ hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
+
+ if (old_mask != hdmi->phy_mask)
+ hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
}
static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
mutex_lock(&hdmi->mutex);
hdmi->disabled = true;
- dw_hdmi_poweroff(hdmi);
+ dw_hdmi_update_power(hdmi);
+ dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
struct dw_hdmi *hdmi = bridge->driver_private;
mutex_lock(&hdmi->mutex);
- dw_hdmi_poweron(hdmi);
hdmi->disabled = false;
+ dw_hdmi_update_power(hdmi);
+ dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
connector);
+ mutex_lock(&hdmi->mutex);
+ hdmi->force = DRM_FORCE_UNSPECIFIED;
+ dw_hdmi_update_power(hdmi);
+ dw_hdmi_update_phy_mask(hdmi);
+ mutex_unlock(&hdmi->mutex);
+
return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
connector_status_connected : connector_status_disconnected;
}
hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
+ /* Store the ELD */
+ drm_edid_to_eld(connector, edid);
kfree(edid);
} else {
dev_dbg(hdmi->dev, "failed to get edid\n");
drm_connector_cleanup(connector);
}
+static void dw_hdmi_connector_force(struct drm_connector *connector)
+{
+ struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
+ connector);
+
+ mutex_lock(&hdmi->mutex);
+ hdmi->force = connector->force;
+ dw_hdmi_update_power(hdmi);
+ dw_hdmi_update_phy_mask(hdmi);
+ mutex_unlock(&hdmi->mutex);
+}
+
static struct drm_connector_funcs dw_hdmi_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = dw_hdmi_connector_detect,
.destroy = dw_hdmi_connector_destroy,
+ .force = dw_hdmi_connector_force,
};
static struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
{
struct dw_hdmi *hdmi = dev_id;
- u8 intr_stat;
- u8 phy_int_pol;
+ u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-
phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
+ phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0);
+
+ phy_pol_mask = 0;
+ if (intr_stat & HDMI_IH_PHY_STAT0_HPD)
+ phy_pol_mask |= HDMI_PHY_HPD;
+ if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0)
+ phy_pol_mask |= HDMI_PHY_RX_SENSE0;
+ if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1)
+ phy_pol_mask |= HDMI_PHY_RX_SENSE1;
+ if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2)
+ phy_pol_mask |= HDMI_PHY_RX_SENSE2;
+ if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3)
+ phy_pol_mask |= HDMI_PHY_RX_SENSE3;
+
+ if (phy_pol_mask)
+ hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0);
- if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
- hdmi_modb(hdmi, ~phy_int_pol, HDMI_PHY_HPD, HDMI_PHY_POL0);
+ /*
+ * RX sense tells us whether the TDMS transmitters are detecting
+ * load - in other words, there's something listening on the
+ * other end of the link. Use this to decide whether we should
+ * power on the phy as HPD may be toggled by the sink to merely
+ * ask the source to re-read the EDID.
+ */
+ if (intr_stat &
+ (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
mutex_lock(&hdmi->mutex);
- if (phy_int_pol & HDMI_PHY_HPD) {
- dev_dbg(hdmi->dev, "EVENT=plugin\n");
-
- if (!hdmi->disabled)
- dw_hdmi_poweron(hdmi);
- } else {
- dev_dbg(hdmi->dev, "EVENT=plugout\n");
-
- if (!hdmi->disabled)
- dw_hdmi_poweroff(hdmi);
+ if (!hdmi->disabled && !hdmi->force) {
+ /*
+ * If the RX sense status indicates we're disconnected,
+ * clear the software rxsense status.
+ */
+ if (!(phy_stat & HDMI_PHY_RX_SENSE))
+ hdmi->rxsense = false;
+
+ /*
+ * Only set the software rxsense status when both
+ * rxsense and hpd indicates we're connected.
+ * This avoids what seems to be bad behaviour in
+ * at least iMX6S versions of the phy.
+ */
+ if (phy_stat & HDMI_PHY_HPD)
+ hdmi->rxsense = true;
+
+ dw_hdmi_update_power(hdmi);
+ dw_hdmi_update_phy_mask(hdmi);
}
mutex_unlock(&hdmi->mutex);
+ }
+
+ if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
+ dev_dbg(hdmi->dev, "EVENT=%s\n",
+ phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
drm_helper_hpd_irq_event(hdmi->bridge->dev);
}
hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
- hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
+ hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+ HDMI_IH_MUTE_PHY_STAT0);
return IRQ_HANDLED;
}
{
struct drm_device *drm = data;
struct device_node *np = dev->of_node;
+ struct platform_device_info pdevinfo;
struct device_node *ddc_node;
+ struct dw_hdmi_audio_data audio;
struct dw_hdmi *hdmi;
int ret;
u32 val = 1;
if (!hdmi)
return -ENOMEM;
+ hdmi->connector.interlace_allowed = 1;
+
hdmi->plat_data = plat_data;
hdmi->dev = dev;
hdmi->dev_type = plat_data->dev_type;
hdmi->sample_rate = 48000;
- hdmi->ratio = 100;
hdmi->encoder = encoder;
hdmi->disabled = true;
+ hdmi->rxsense = true;
+ hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE);
mutex_init(&hdmi->mutex);
mutex_init(&hdmi->audio_mutex);
* Configure registers related to HDMI interrupt
* generation before registering IRQ.
*/
- hdmi_writeb(hdmi, HDMI_PHY_HPD, HDMI_PHY_POL0);
+ hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
/* Clear Hotplug interrupts */
- hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD, HDMI_IH_PHY_STAT0);
+ hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+ HDMI_IH_PHY_STAT0);
ret = dw_hdmi_fb_registered(hdmi);
if (ret)
goto err_iahb;
/* Unmute interrupts */
- hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
+ hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+ HDMI_IH_MUTE_PHY_STAT0);
+
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ pdevinfo.parent = dev;
+ pdevinfo.id = PLATFORM_DEVID_AUTO;
+
+ if (hdmi_readb(hdmi, HDMI_CONFIG1_ID) & HDMI_CONFIG1_AHB) {
+ audio.phys = iores->start;
+ audio.base = hdmi->regs;
+ audio.irq = irq;
+ audio.hdmi = hdmi;
+ audio.eld = hdmi->connector.eld;
+
+ pdevinfo.name = "dw-hdmi-ahb-audio";
+ pdevinfo.data = &audio;
+ pdevinfo.size_data = sizeof(audio);
+ pdevinfo.dma_mask = DMA_BIT_MASK(32);
+ hdmi->audio = platform_device_register_full(&pdevinfo);
+ }
dev_set_drvdata(dev, hdmi);
{
struct dw_hdmi *hdmi = dev_get_drvdata(dev);
+ if (hdmi->audio && !IS_ERR(hdmi->audio))
+ platform_device_unregister(hdmi->audio);
+
/* Disable all interrupts */
hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12
enum {
+/* CONFIG1_ID field values */
+ HDMI_CONFIG1_AHB = 0x01,
+
/* IH_FC_INT2 field values */
HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
struct drm_property_blob *blob;
int ret;
- if (!length)
+ if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob))
return ERR_PTR(-EINVAL);
blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL);
* not associated with any file_priv. */
mutex_lock(&dev->mode_config.blob_lock);
out_resp->blob_id = blob->base.id;
- list_add_tail(&file_priv->blobs, &blob->head_file);
+ list_add_tail(&blob->head_file, &file_priv->blobs);
mutex_unlock(&dev->mode_config.blob_lock);
return 0;
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
- if (!port->mstb) {
+ mstb = port->mstb;
+ if (!mstb) {
DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
- return NULL;
+ goto out;
}
- mstb = port->mstb;
break;
}
}
}
kref_get(&mstb->kref);
+out:
mutex_unlock(&mgr->lock);
return mstb;
}
if (msgs[num - 1].flags & I2C_M_RD)
reading = true;
- if (!reading) {
+ if (!reading || (num - 1 > DP_REMOTE_I2C_READ_MAX_TRANSACTIONS)) {
DRM_DEBUG_KMS("Unsupported I2C transaction for MST device\n");
ret = -EIO;
goto out;
}
+ memset(&msg, 0, sizeof(msg));
msg.req_type = DP_REMOTE_I2C_READ;
msg.u.i2c_read.num_transactions = num - 1;
msg.u.i2c_read.port_number = port->port_num;
char *buf)
{
struct drm_connector *connector = to_drm_connector(device);
- struct drm_device *dev = connector->dev;
- uint64_t dpms_status;
- int ret;
+ int dpms;
- ret = drm_object_property_get_value(&connector->base,
- dev->mode_config.dpms_property,
- &dpms_status);
- if (ret)
- return 0;
+ dpms = READ_ONCE(connector->dpms);
return snprintf(buf, PAGE_SIZE, "%s\n",
- drm_get_dpms_name((int)dpms_status));
+ drm_get_dpms_name(dpms));
}
static ssize_t enabled_show(struct device *device,
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
-#include <drm/drm_encoder_slave.h>
#include <drm/drm_edid.h>
#include <drm/drm_of.h>
#include <drm/i2c/tda998x.h>
struct i2c_client *cec;
struct i2c_client *hdmi;
struct mutex mutex;
- struct delayed_work dwork;
- uint16_t rev;
- uint8_t current_page;
+ u16 rev;
+ u8 current_page;
int dpms;
bool is_hdmi_sink;
u8 vip_cntrl_0;
wait_queue_head_t wq_edid;
volatile int wq_edid_wait;
- struct drm_encoder *encoder;
+
+ struct work_struct detect_work;
+ struct timer_list edid_delay_timer;
+ wait_queue_head_t edid_delay_waitq;
+ bool edid_delay_active;
+
+ struct drm_encoder encoder;
+ struct drm_connector connector;
};
-#define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
+#define conn_to_tda998x_priv(x) \
+ container_of(x, struct tda998x_priv, connector)
+
+#define enc_to_tda998x_priv(x) \
+ container_of(x, struct tda998x_priv, encoder)
/* The TDA9988 series of devices use a paged register scheme.. to simplify
* things we encode the page # in upper bits of the register #. To read/
# define CEC_FRO_IM_CLK_CTRL_FRO_DIV (1 << 0)
#define REG_CEC_RXSHPDINTENA 0xfc /* read/write */
#define REG_CEC_RXSHPDINT 0xfd /* read */
+# define CEC_RXSHPDINT_RXSENS BIT(0)
+# define CEC_RXSHPDINT_HPD BIT(1)
#define REG_CEC_RXSHPDLEV 0xfe /* read */
# define CEC_RXSHPDLEV_RXSENS (1 << 0)
# define CEC_RXSHPDLEV_HPD (1 << 1)
#define TDA19988 0x0301
static void
-cec_write(struct tda998x_priv *priv, uint16_t addr, uint8_t val)
+cec_write(struct tda998x_priv *priv, u16 addr, u8 val)
{
struct i2c_client *client = priv->cec;
- uint8_t buf[] = {addr, val};
+ u8 buf[] = {addr, val};
int ret;
ret = i2c_master_send(client, buf, sizeof(buf));
dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
}
-static uint8_t
-cec_read(struct tda998x_priv *priv, uint8_t addr)
+static u8
+cec_read(struct tda998x_priv *priv, u8 addr)
{
struct i2c_client *client = priv->cec;
- uint8_t val;
+ u8 val;
int ret;
ret = i2c_master_send(client, &addr, sizeof(addr));
}
static int
-set_page(struct tda998x_priv *priv, uint16_t reg)
+set_page(struct tda998x_priv *priv, u16 reg)
{
if (REG2PAGE(reg) != priv->current_page) {
struct i2c_client *client = priv->hdmi;
- uint8_t buf[] = {
+ u8 buf[] = {
REG_CURPAGE, REG2PAGE(reg)
};
int ret = i2c_master_send(client, buf, sizeof(buf));
}
static int
-reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt)
+reg_read_range(struct tda998x_priv *priv, u16 reg, char *buf, int cnt)
{
struct i2c_client *client = priv->hdmi;
- uint8_t addr = REG2ADDR(reg);
+ u8 addr = REG2ADDR(reg);
int ret;
mutex_lock(&priv->mutex);
}
static void
-reg_write_range(struct tda998x_priv *priv, uint16_t reg, uint8_t *p, int cnt)
+reg_write_range(struct tda998x_priv *priv, u16 reg, u8 *p, int cnt)
{
struct i2c_client *client = priv->hdmi;
- uint8_t buf[cnt+1];
+ u8 buf[cnt+1];
int ret;
buf[0] = REG2ADDR(reg);
}
static int
-reg_read(struct tda998x_priv *priv, uint16_t reg)
+reg_read(struct tda998x_priv *priv, u16 reg)
{
- uint8_t val = 0;
+ u8 val = 0;
int ret;
ret = reg_read_range(priv, reg, &val, sizeof(val));
}
static void
-reg_write(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
+reg_write(struct tda998x_priv *priv, u16 reg, u8 val)
{
struct i2c_client *client = priv->hdmi;
- uint8_t buf[] = {REG2ADDR(reg), val};
+ u8 buf[] = {REG2ADDR(reg), val};
int ret;
mutex_lock(&priv->mutex);
}
static void
-reg_write16(struct tda998x_priv *priv, uint16_t reg, uint16_t val)
+reg_write16(struct tda998x_priv *priv, u16 reg, u16 val)
{
struct i2c_client *client = priv->hdmi;
- uint8_t buf[] = {REG2ADDR(reg), val >> 8, val};
+ u8 buf[] = {REG2ADDR(reg), val >> 8, val};
int ret;
mutex_lock(&priv->mutex);
}
static void
-reg_set(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
+reg_set(struct tda998x_priv *priv, u16 reg, u8 val)
{
int old_val;
}
static void
-reg_clear(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
+reg_clear(struct tda998x_priv *priv, u16 reg, u8 val)
{
int old_val;
reg_write(priv, REG_MUX_VP_VIP_OUT, 0x24);
}
-/* handle HDMI connect/disconnect */
-static void tda998x_hpd(struct work_struct *work)
+/*
+ * The TDA998x has a problem when trying to read the EDID close to a
+ * HPD assertion: it needs a delay of 100ms to avoid timing out while
+ * trying to read EDID data.
+ *
+ * However, tda998x_encoder_get_modes() may be called at any moment
+ * after tda998x_connector_detect() indicates that we are connected, so
+ * we need to delay probing modes in tda998x_encoder_get_modes() after
+ * we have seen a HPD inactive->active transition. This code implements
+ * that delay.
+ */
+static void tda998x_edid_delay_done(unsigned long data)
+{
+ struct tda998x_priv *priv = (struct tda998x_priv *)data;
+
+ priv->edid_delay_active = false;
+ wake_up(&priv->edid_delay_waitq);
+ schedule_work(&priv->detect_work);
+}
+
+static void tda998x_edid_delay_start(struct tda998x_priv *priv)
+{
+ priv->edid_delay_active = true;
+ mod_timer(&priv->edid_delay_timer, jiffies + HZ/10);
+}
+
+static int tda998x_edid_delay_wait(struct tda998x_priv *priv)
+{
+ return wait_event_killable(priv->edid_delay_waitq, !priv->edid_delay_active);
+}
+
+/*
+ * We need to run the KMS hotplug event helper outside of our threaded
+ * interrupt routine as this can call back into our get_modes method,
+ * which will want to make use of interrupts.
+ */
+static void tda998x_detect_work(struct work_struct *work)
{
- struct delayed_work *dwork = to_delayed_work(work);
struct tda998x_priv *priv =
- container_of(dwork, struct tda998x_priv, dwork);
+ container_of(work, struct tda998x_priv, detect_work);
+ struct drm_device *dev = priv->encoder.dev;
- if (priv->encoder && priv->encoder->dev)
- drm_kms_helper_hotplug_event(priv->encoder->dev);
+ if (dev)
+ drm_kms_helper_hotplug_event(dev);
}
/*
{
struct tda998x_priv *priv = data;
u8 sta, cec, lvl, flag0, flag1, flag2;
+ bool handled = false;
- if (!priv)
- return IRQ_HANDLED;
sta = cec_read(priv, REG_CEC_INTSTATUS);
cec = cec_read(priv, REG_CEC_RXSHPDINT);
lvl = cec_read(priv, REG_CEC_RXSHPDLEV);
DRM_DEBUG_DRIVER(
"tda irq sta %02x cec %02x lvl %02x f0 %02x f1 %02x f2 %02x\n",
sta, cec, lvl, flag0, flag1, flag2);
+
+ if (cec & CEC_RXSHPDINT_HPD) {
+ if (lvl & CEC_RXSHPDLEV_HPD)
+ tda998x_edid_delay_start(priv);
+ else
+ schedule_work(&priv->detect_work);
+
+ handled = true;
+ }
+
if ((flag2 & INT_FLAGS_2_EDID_BLK_RD) && priv->wq_edid_wait) {
priv->wq_edid_wait = 0;
wake_up(&priv->wq_edid);
- } else if (cec != 0) { /* HPD change */
- schedule_delayed_work(&priv->dwork, HZ/10);
+ handled = true;
}
- return IRQ_HANDLED;
-}
-static uint8_t tda998x_cksum(uint8_t *buf, size_t bytes)
-{
- int sum = 0;
-
- while (bytes--)
- sum -= *buf++;
- return sum;
+ return IRQ_RETVAL(handled);
}
-#define HB(x) (x)
-#define PB(x) (HB(2) + 1 + (x))
-
static void
-tda998x_write_if(struct tda998x_priv *priv, uint8_t bit, uint16_t addr,
- uint8_t *buf, size_t size)
+tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
+ union hdmi_infoframe *frame)
{
+ u8 buf[32];
+ ssize_t len;
+
+ len = hdmi_infoframe_pack(frame, buf, sizeof(buf));
+ if (len < 0) {
+ dev_err(&priv->hdmi->dev,
+ "hdmi_infoframe_pack() type=0x%02x failed: %zd\n",
+ frame->any.type, len);
+ return;
+ }
+
reg_clear(priv, REG_DIP_IF_FLAGS, bit);
- reg_write_range(priv, addr, buf, size);
+ reg_write_range(priv, addr, buf, len);
reg_set(priv, REG_DIP_IF_FLAGS, bit);
}
static void
tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p)
{
- u8 buf[PB(HDMI_AUDIO_INFOFRAME_SIZE) + 1];
+ union hdmi_infoframe frame;
+
+ hdmi_audio_infoframe_init(&frame.audio);
- memset(buf, 0, sizeof(buf));
- buf[HB(0)] = HDMI_INFOFRAME_TYPE_AUDIO;
- buf[HB(1)] = 0x01;
- buf[HB(2)] = HDMI_AUDIO_INFOFRAME_SIZE;
- buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
- buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
- buf[PB(4)] = p->audio_frame[4];
- buf[PB(5)] = p->audio_frame[5] & 0xf8; /* DM_INH + LSV */
+ frame.audio.channels = p->audio_frame[1] & 0x07;
+ frame.audio.channel_allocation = p->audio_frame[4];
+ frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3;
+ frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7;
- buf[PB(0)] = tda998x_cksum(buf, sizeof(buf));
+ /*
+ * L-PCM and IEC61937 compressed audio shall always set sample
+ * frequency to "refer to stream". For others, see the HDMI
+ * specification.
+ */
+ frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2;
- tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, buf,
- sizeof(buf));
+ tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
}
static void
tda998x_write_avi(struct tda998x_priv *priv, struct drm_display_mode *mode)
{
- struct hdmi_avi_infoframe frame;
- u8 buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
- ssize_t len;
+ union hdmi_infoframe frame;
- drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
+ drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
+ frame.avi.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
- frame.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
-
- len = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
- if (len < 0) {
- dev_err(&priv->hdmi->dev,
- "hdmi_avi_infoframe_pack() failed: %zd\n", len);
- return;
- }
-
- tda998x_write_if(priv, DIP_IF_FLAGS_IF2, REG_IF2_HB0, buf, len);
+ tda998x_write_if(priv, DIP_IF_FLAGS_IF2, REG_IF2_HB0, &frame);
}
static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
tda998x_configure_audio(struct tda998x_priv *priv,
struct drm_display_mode *mode, struct tda998x_encoder_params *p)
{
- uint8_t buf[6], clksel_aip, clksel_fs, cts_n, adiv;
- uint32_t n;
+ u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv;
+ u32 n;
/* Enable audio ports */
reg_write(priv, REG_ENA_AP, p->audio_cfg);
priv->params = *p;
}
-static void tda998x_encoder_dpms(struct tda998x_priv *priv, int mode)
+static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
{
+ struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
+
/* we only care about on or off: */
if (mode != DRM_MODE_DPMS_ON)
mode = DRM_MODE_DPMS_OFF;
return true;
}
-static int tda998x_encoder_mode_valid(struct tda998x_priv *priv,
- struct drm_display_mode *mode)
+static int tda998x_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
if (mode->clock > 150000)
return MODE_CLOCK_HIGH;
}
static void
-tda998x_encoder_mode_set(struct tda998x_priv *priv,
+tda998x_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- uint16_t ref_pix, ref_line, n_pix, n_line;
- uint16_t hs_pix_s, hs_pix_e;
- uint16_t vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
- uint16_t vs2_pix_s, vs2_pix_e, vs2_line_s, vs2_line_e;
- uint16_t vwin1_line_s, vwin1_line_e;
- uint16_t vwin2_line_s, vwin2_line_e;
- uint16_t de_pix_s, de_pix_e;
- uint8_t reg, div, rep;
+ struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
+ u16 ref_pix, ref_line, n_pix, n_line;
+ u16 hs_pix_s, hs_pix_e;
+ u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
+ u16 vs2_pix_s, vs2_pix_e, vs2_line_s, vs2_line_e;
+ u16 vwin1_line_s, vwin1_line_e;
+ u16 vwin2_line_s, vwin2_line_e;
+ u16 de_pix_s, de_pix_e;
+ u8 reg, div, rep;
/*
* Internally TDA998x is using ITU-R BT.656 style sync but
}
static enum drm_connector_status
-tda998x_encoder_detect(struct tda998x_priv *priv)
+tda998x_connector_detect(struct drm_connector *connector, bool force)
{
- uint8_t val = cec_read(priv, REG_CEC_RXSHPDLEV);
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
connector_status_disconnected;
static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
{
struct tda998x_priv *priv = data;
- uint8_t offset, segptr;
+ u8 offset, segptr;
int ret, i;
offset = (blk & 1) ? 128 : 0;
return 0;
}
-static int
-tda998x_encoder_get_modes(struct tda998x_priv *priv,
- struct drm_connector *connector)
+static int tda998x_connector_get_modes(struct drm_connector *connector)
{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
struct edid *edid;
int n;
+ /*
+ * If we get killed while waiting for the HPD timeout, return
+ * no modes found: we are not in a restartable path, so we
+ * can't handle signals gracefully.
+ */
+ if (tda998x_edid_delay_wait(priv))
+ return 0;
+
if (priv->rev == TDA19988)
reg_clear(priv, REG_TX4, TX4_PD_RAM);
DRM_CONNECTOR_POLL_DISCONNECT;
}
-static int
-tda998x_encoder_set_property(struct drm_encoder *encoder,
- struct drm_connector *connector,
- struct drm_property *property,
- uint64_t val)
-{
- DBG("");
- return 0;
-}
-
static void tda998x_destroy(struct tda998x_priv *priv)
{
/* disable all IRQs and free the IRQ handler */
cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
- if (priv->hdmi->irq) {
- free_irq(priv->hdmi->irq, priv);
- cancel_delayed_work_sync(&priv->dwork);
- }
-
- i2c_unregister_device(priv->cec);
-}
-
-/* Slave encoder support */
-
-static void
-tda998x_encoder_slave_set_config(struct drm_encoder *encoder, void *params)
-{
- tda998x_encoder_set_config(to_tda998x_priv(encoder), params);
-}
-static void tda998x_encoder_slave_destroy(struct drm_encoder *encoder)
-{
- struct tda998x_priv *priv = to_tda998x_priv(encoder);
-
- tda998x_destroy(priv);
- drm_i2c_encoder_destroy(encoder);
- kfree(priv);
-}
-
-static void tda998x_encoder_slave_dpms(struct drm_encoder *encoder, int mode)
-{
- tda998x_encoder_dpms(to_tda998x_priv(encoder), mode);
-}
-
-static int tda998x_encoder_slave_mode_valid(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
-{
- return tda998x_encoder_mode_valid(to_tda998x_priv(encoder), mode);
-}
+ if (priv->hdmi->irq)
+ free_irq(priv->hdmi->irq, priv);
-static void
-tda998x_encoder_slave_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- tda998x_encoder_mode_set(to_tda998x_priv(encoder), mode, adjusted_mode);
-}
+ del_timer_sync(&priv->edid_delay_timer);
+ cancel_work_sync(&priv->detect_work);
-static enum drm_connector_status
-tda998x_encoder_slave_detect(struct drm_encoder *encoder,
- struct drm_connector *connector)
-{
- return tda998x_encoder_detect(to_tda998x_priv(encoder));
-}
-
-static int tda998x_encoder_slave_get_modes(struct drm_encoder *encoder,
- struct drm_connector *connector)
-{
- return tda998x_encoder_get_modes(to_tda998x_priv(encoder), connector);
-}
-
-static int
-tda998x_encoder_slave_create_resources(struct drm_encoder *encoder,
- struct drm_connector *connector)
-{
- tda998x_encoder_set_polling(to_tda998x_priv(encoder), connector);
- return 0;
+ i2c_unregister_device(priv->cec);
}
-static struct drm_encoder_slave_funcs tda998x_encoder_slave_funcs = {
- .set_config = tda998x_encoder_slave_set_config,
- .destroy = tda998x_encoder_slave_destroy,
- .dpms = tda998x_encoder_slave_dpms,
- .save = tda998x_encoder_save,
- .restore = tda998x_encoder_restore,
- .mode_fixup = tda998x_encoder_mode_fixup,
- .mode_valid = tda998x_encoder_slave_mode_valid,
- .mode_set = tda998x_encoder_slave_mode_set,
- .detect = tda998x_encoder_slave_detect,
- .get_modes = tda998x_encoder_slave_get_modes,
- .create_resources = tda998x_encoder_slave_create_resources,
- .set_property = tda998x_encoder_set_property,
-};
-
/* I2C driver functions */
static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
priv->dpms = DRM_MODE_DPMS_OFF;
mutex_init(&priv->mutex); /* protect the page access */
+ init_waitqueue_head(&priv->edid_delay_waitq);
+ setup_timer(&priv->edid_delay_timer, tda998x_edid_delay_done,
+ (unsigned long)priv);
+ INIT_WORK(&priv->detect_work, tda998x_detect_work);
/* wake up the device: */
cec_write(priv, REG_CEC_ENAMODS,
/* init read EDID waitqueue and HDP work */
init_waitqueue_head(&priv->wq_edid);
- INIT_DELAYED_WORK(&priv->dwork, tda998x_hpd);
/* clear pending interrupts */
reg_read(priv, REG_INT_FLAGS_0);
return -ENXIO;
}
-static int tda998x_encoder_init(struct i2c_client *client,
- struct drm_device *dev,
- struct drm_encoder_slave *encoder_slave)
-{
- struct tda998x_priv *priv;
- int ret;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->encoder = &encoder_slave->base;
-
- ret = tda998x_create(client, priv);
- if (ret) {
- kfree(priv);
- return ret;
- }
-
- encoder_slave->slave_priv = priv;
- encoder_slave->slave_funcs = &tda998x_encoder_slave_funcs;
-
- return 0;
-}
-
-struct tda998x_priv2 {
- struct tda998x_priv base;
- struct drm_encoder encoder;
- struct drm_connector connector;
-};
-
-#define conn_to_tda998x_priv2(x) \
- container_of(x, struct tda998x_priv2, connector);
-
-#define enc_to_tda998x_priv2(x) \
- container_of(x, struct tda998x_priv2, encoder);
-
-static void tda998x_encoder2_dpms(struct drm_encoder *encoder, int mode)
-{
- struct tda998x_priv2 *priv = enc_to_tda998x_priv2(encoder);
-
- tda998x_encoder_dpms(&priv->base, mode);
-}
-
static void tda998x_encoder_prepare(struct drm_encoder *encoder)
{
- tda998x_encoder2_dpms(encoder, DRM_MODE_DPMS_OFF);
+ tda998x_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
}
static void tda998x_encoder_commit(struct drm_encoder *encoder)
{
- tda998x_encoder2_dpms(encoder, DRM_MODE_DPMS_ON);
-}
-
-static void tda998x_encoder2_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct tda998x_priv2 *priv = enc_to_tda998x_priv2(encoder);
-
- tda998x_encoder_mode_set(&priv->base, mode, adjusted_mode);
+ tda998x_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
}
static const struct drm_encoder_helper_funcs tda998x_encoder_helper_funcs = {
- .dpms = tda998x_encoder2_dpms,
+ .dpms = tda998x_encoder_dpms,
.save = tda998x_encoder_save,
.restore = tda998x_encoder_restore,
.mode_fixup = tda998x_encoder_mode_fixup,
.prepare = tda998x_encoder_prepare,
.commit = tda998x_encoder_commit,
- .mode_set = tda998x_encoder2_mode_set,
+ .mode_set = tda998x_encoder_mode_set,
};
static void tda998x_encoder_destroy(struct drm_encoder *encoder)
{
- struct tda998x_priv2 *priv = enc_to_tda998x_priv2(encoder);
+ struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
- tda998x_destroy(&priv->base);
+ tda998x_destroy(priv);
drm_encoder_cleanup(encoder);
}
.destroy = tda998x_encoder_destroy,
};
-static int tda998x_connector_get_modes(struct drm_connector *connector)
-{
- struct tda998x_priv2 *priv = conn_to_tda998x_priv2(connector);
-
- return tda998x_encoder_get_modes(&priv->base, connector);
-}
-
-static int tda998x_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct tda998x_priv2 *priv = conn_to_tda998x_priv2(connector);
-
- return tda998x_encoder_mode_valid(&priv->base, mode);
-}
-
static struct drm_encoder *
tda998x_connector_best_encoder(struct drm_connector *connector)
{
- struct tda998x_priv2 *priv = conn_to_tda998x_priv2(connector);
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
return &priv->encoder;
}
.best_encoder = tda998x_connector_best_encoder,
};
-static enum drm_connector_status
-tda998x_connector_detect(struct drm_connector *connector, bool force)
-{
- struct tda998x_priv2 *priv = conn_to_tda998x_priv2(connector);
-
- return tda998x_encoder_detect(&priv->base);
-}
-
static void tda998x_connector_destroy(struct drm_connector *connector)
{
drm_connector_unregister(connector);
struct tda998x_encoder_params *params = dev->platform_data;
struct i2c_client *client = to_i2c_client(dev);
struct drm_device *drm = data;
- struct tda998x_priv2 *priv;
- uint32_t crtcs = 0;
+ struct tda998x_priv *priv;
+ u32 crtcs = 0;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
crtcs = 1 << 0;
}
- priv->base.encoder = &priv->encoder;
priv->connector.interlace_allowed = 1;
priv->encoder.possible_crtcs = crtcs;
- ret = tda998x_create(client, &priv->base);
+ ret = tda998x_create(client, priv);
if (ret)
return ret;
if (!dev->of_node && params)
- tda998x_encoder_set_config(&priv->base, params);
+ tda998x_encoder_set_config(priv, params);
- tda998x_encoder_set_polling(&priv->base, &priv->connector);
+ tda998x_encoder_set_polling(priv, &priv->connector);
drm_encoder_helper_add(&priv->encoder, &tda998x_encoder_helper_funcs);
ret = drm_encoder_init(drm, &priv->encoder, &tda998x_encoder_funcs,
err_connector:
drm_encoder_cleanup(&priv->encoder);
err_encoder:
- tda998x_destroy(&priv->base);
+ tda998x_destroy(priv);
return ret;
}
static void tda998x_unbind(struct device *dev, struct device *master,
void *data)
{
- struct tda998x_priv2 *priv = dev_get_drvdata(dev);
+ struct tda998x_priv *priv = dev_get_drvdata(dev);
drm_connector_cleanup(&priv->connector);
drm_encoder_cleanup(&priv->encoder);
- tda998x_destroy(&priv->base);
+ tda998x_destroy(priv);
}
static const struct component_ops tda998x_ops = {
};
MODULE_DEVICE_TABLE(i2c, tda998x_ids);
-static struct drm_i2c_encoder_driver tda998x_driver = {
- .i2c_driver = {
- .probe = tda998x_probe,
- .remove = tda998x_remove,
- .driver = {
- .name = "tda998x",
- .of_match_table = of_match_ptr(tda998x_dt_ids),
- },
- .id_table = tda998x_ids,
+static struct i2c_driver tda998x_driver = {
+ .probe = tda998x_probe,
+ .remove = tda998x_remove,
+ .driver = {
+ .name = "tda998x",
+ .of_match_table = of_match_ptr(tda998x_dt_ids),
},
- .encoder_init = tda998x_encoder_init,
+ .id_table = tda998x_ids,
};
-/* Module initialization */
-
-static int __init
-tda998x_init(void)
-{
- DBG("");
- return drm_i2c_encoder_register(THIS_MODULE, &tda998x_driver);
-}
-
-static void __exit
-tda998x_exit(void)
-{
- DBG("");
- drm_i2c_encoder_unregister(&tda998x_driver);
-}
+module_i2c_driver(tda998x_driver);
MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder");
MODULE_LICENSE("GPL");
-
-module_init(tda998x_init);
-module_exit(tda998x_exit);
}
/**
- * i915_gem_shrink - Shrink buffer object caches completely
+ * i915_gem_shrink_all - Shrink buffer object caches completely
* @dev_priv: i915 device
*
* This is a simple wraper around i915_gem_shrink() to aggressively shrink all
* Also note, that the object created here is not currently a "first class"
* object, in that several ioctls are banned. These are the CPU access
* ioctls: mmap(), pwrite and pread. In practice, you are expected to use
- * direct access via your pointer rather than use those ioctls.
+ * direct access via your pointer rather than use those ioctls. Another
+ * restriction is that we do not allow userptr surfaces to be pinned to the
+ * hardware and so we reject any attempt to create a framebuffer out of a
+ * userptr.
*
* If you think this is a good interface to use to pass GPU memory between
* drivers, please use dma-buf instead. In fact, wherever possible use
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
+ /*
+ * Apparently we need to have VGA mode enabled prior to changing
+ * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+ * dividers, even though the register value does change.
+ */
+ I915_WRITE(reg, 0);
+
+ I915_WRITE(reg, dpll);
+
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
udelay(150);
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
+ if (obj->userptr.mm) {
+ DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ return -EINVAL;
+ }
+
return drm_gem_handle_create(file, &obj->base, handle);
}
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ struct intel_plane *plane;
+
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void readout_plane_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *p;
- struct intel_plane_state *plane_state;
- bool active = crtc_state->base.active;
-
- for_each_intel_plane(crtc->base.dev, p) {
- if (crtc->pipe != p->pipe)
- continue;
-
- plane_state = to_intel_plane_state(p->base.state);
+ struct drm_plane *primary = crtc->base.primary;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
- if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- plane_state->visible = primary_get_hw_state(crtc);
- if (plane_state->visible)
- crtc->base.state->plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else {
- if (active)
- p->disable_plane(&p->base, &crtc->base);
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(primary));
- plane_state->visible = false;
- }
- }
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
- if (crtc->base.state->active) {
- intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
- intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
- WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
- /*
- * The initial mode needs to be set in order to keep
- * the atomic core happy. It wants a valid mode if the
- * crtc's enabled, so we do the above call.
- *
- * At this point some state updated by the connectors
- * in their ->detect() callback has not run yet, so
- * no recalculation can be done yet.
- *
- * Even if we could do a recalculation and modeset
- * right now it would cause a double modeset if
- * fbdev or userspace chooses a different initial mode.
- *
- * If that happens, someone indicated they wanted a
- * mode change, which means it's safe to do a full
- * recalculation.
- */
- crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
- }
-
- crtc->base.hwmode = crtc->config->base.adjusted_mode;
- readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ }
+ }
}
/* Scan out the current hw modeset state,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
int plane;
u32 val;
+ memset(ddb, 0, sizeof(*ddb));
+
for_each_pipe(dev_priv, pipe) {
+ if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PIPE(pipe)))
+ continue;
+
for_each_plane(dev_priv, pipe, plane) {
val = I915_READ(PLANE_BUF_CFG(pipe, plane));
skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane],
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
if (drm->device.info.family < NV_DEVICE_INFO_V0_TESLA) {
dev->mode_config.max_width = 4096;
dev->mode_config.max_height = 4096;
- } else {
+ } else
+ if (drm->device.info.family < NV_DEVICE_INFO_V0_FERMI) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
+ } else {
+ dev->mode_config.max_width = 16384;
+ dev->mode_config.max_height = 16384;
}
dev->mode_config.preferred_depth = 24;
return 0;
}
+static int
+nouveau_fbcon_open(struct fb_info *info, int user)
+{
+ struct nouveau_fbdev *fbcon = info->par;
+ struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
+ int ret = pm_runtime_get_sync(drm->dev->dev);
+ if (ret < 0 && ret != -EACCES)
+ return ret;
+ return 0;
+}
+
+static int
+nouveau_fbcon_release(struct fb_info *info, int user)
+{
+ struct nouveau_fbdev *fbcon = info->par;
+ struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
+ pm_runtime_put(drm->dev->dev);
+ return 0;
+}
+
static struct fb_ops nouveau_fbcon_ops = {
.owner = THIS_MODULE,
+ .fb_open = nouveau_fbcon_open,
+ .fb_release = nouveau_fbcon_release,
.fb_check_var = drm_fb_helper_check_var,
.fb_set_par = drm_fb_helper_set_par,
.fb_fillrect = nouveau_fbcon_fillrect,
static struct fb_ops nouveau_fbcon_sw_ops = {
.owner = THIS_MODULE,
+ .fb_open = nouveau_fbcon_open,
+ .fb_release = nouveau_fbcon_release,
.fb_check_var = drm_fb_helper_check_var,
.fb_set_par = drm_fb_helper_set_par,
.fb_fillrect = drm_fb_helper_cfb_fillrect,
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
struct nvkm_vma *vma;
- if (nvbo->bo.mem.mem_type == TTM_PL_TT)
+ if (is_power_of_2(nvbo->valid_domains))
+ rep->domain = nvbo->valid_domains;
+ else if (nvbo->bo.mem.mem_type == TTM_PL_TT)
rep->domain = NOUVEAU_GEM_DOMAIN_GART;
else
rep->domain = NOUVEAU_GEM_DOMAIN_VRAM;
-
rep->offset = nvbo->bo.offset;
if (cli->vm) {
vma = nouveau_bo_vma_find(nvbo, cli->vm);
index = NVKM_I2C_BUS_PRI;
if (init->outp && init->outp->i2c_upper_default)
index = NVKM_I2C_BUS_SEC;
+ } else
+ if (index == 0x80) {
+ index = NVKM_I2C_BUS_PRI;
+ } else
+ if (index == 0x81) {
+ index = NVKM_I2C_BUS_SEC;
}
bus = nvkm_i2c_bus_find(i2c, index);
void *(*init)(struct nvkm_bios *, const char *);
void (*fini)(void *);
u32 (*read)(void *, u32 offset, u32 length, struct nvkm_bios *);
+ u32 (*size)(void *);
bool rw;
+ bool ignore_checksum;
+ bool no_pcir;
};
int nvbios_extend(struct nvkm_bios *, u32 length);
u32 read = mthd->func->read(data, start, limit - start, bios);
bios->size = start + read;
}
- return bios->size >= limit;
+ return bios->size >= upto;
}
static int
struct nvbios_image image;
int score = 1;
- if (!shadow_fetch(bios, mthd, offset + 0x1000)) {
- nvkm_debug(subdev, "%08x: header fetch failed\n", offset);
- return 0;
- }
+ if (mthd->func->no_pcir) {
+ image.base = 0;
+ image.type = 0;
+ image.size = mthd->func->size(mthd->data);
+ image.last = 1;
+ } else {
+ if (!shadow_fetch(bios, mthd, offset + 0x1000)) {
+ nvkm_debug(subdev, "%08x: header fetch failed\n",
+ offset);
+ return 0;
+ }
- if (!nvbios_image(bios, idx, &image)) {
- nvkm_debug(subdev, "image %d invalid\n", idx);
- return 0;
+ if (!nvbios_image(bios, idx, &image)) {
+ nvkm_debug(subdev, "image %d invalid\n", idx);
+ return 0;
+ }
}
nvkm_debug(subdev, "%08x: type %02x, %d bytes\n",
image.base, image.type, image.size);
switch (image.type) {
case 0x00:
- if (nvbios_checksum(&bios->data[image.base], image.size)) {
+ if (!mthd->func->ignore_checksum &&
+ nvbios_checksum(&bios->data[image.base], image.size)) {
nvkm_debug(subdev, "%08x: checksum failed\n",
image.base);
if (mthd->func->rw)
*
*/
#include "priv.h"
+
#include <core/pci.h>
#if defined(__powerpc__)
of_read(void *data, u32 offset, u32 length, struct nvkm_bios *bios)
{
struct priv *priv = data;
- if (offset + length <= priv->size) {
+ if (offset < priv->size) {
+ length = min_t(u32, length, priv->size - offset);
memcpy_fromio(bios->data + offset, priv->data + offset, length);
return length;
}
return 0;
}
+static u32
+of_size(void *data)
+{
+ struct priv *priv = data;
+ return priv->size;
+}
+
static void *
of_init(struct nvkm_bios *bios, const char *name)
{
- struct pci_dev *pdev = bios->subdev.device->func->pci(bios->subdev.device)->pdev;
+ struct nvkm_device *device = bios->subdev.device;
+ struct pci_dev *pdev = device->func->pci(device)->pdev;
struct device_node *dn;
struct priv *priv;
if (!(dn = pci_device_to_OF_node(pdev)))
.init = of_init,
.fini = (void(*)(void *))kfree,
.read = of_read,
+ .size = of_size,
.rw = false,
+ .ignore_checksum = true,
+ .no_pcir = true,
};
#else
const struct nvbios_source
nvkm_device_agp_quirks[] = {
/* VIA Apollo PRO133x / GeForce FX 5600 Ultra - fdo#20341 */
{ PCI_VENDOR_ID_VIA, 0x0691, PCI_VENDOR_ID_NVIDIA, 0x0311, 2 },
+ /* SiS 761 does not support AGP cards, use PCI mode */
+ { PCI_VENDOR_ID_SI, 0x0761, PCI_ANY_ID, PCI_ANY_ID, 0 },
{},
};
while (quirk->hostbridge_vendor) {
if (info.device->vendor == quirk->hostbridge_vendor &&
info.device->device == quirk->hostbridge_device &&
- pci->pdev->vendor == quirk->chip_vendor &&
- pci->pdev->device == quirk->chip_device) {
+ (quirk->chip_vendor == (u16)PCI_ANY_ID ||
+ pci->pdev->vendor == quirk->chip_vendor) &&
+ (quirk->chip_device == (u16)PCI_ANY_ID ||
+ pci->pdev->device == quirk->chip_device)) {
nvkm_info(subdev, "forcing default agp mode to %dX, "
"use NvAGP=<mode> to override\n",
quirk->mode);
bo->is_primary = true;
ret = qxl_bo_reserve(bo, false);
+ if (ret)
+ return ret;
+ ret = qxl_bo_pin(bo, bo->type, NULL);
+ qxl_bo_unreserve(bo);
if (ret)
return ret;
}
drm_vblank_put(dev, qcrtc->index);
- qxl_bo_unreserve(bo);
+ ret = qxl_bo_reserve(bo, false);
+ if (!ret) {
+ qxl_bo_unpin(bo);
+ qxl_bo_unreserve(bo);
+ }
return 0;
}
spin_lock_irqsave(&qfbdev->dirty.lock, flags);
- if (qfbdev->dirty.y1 < y)
- y = qfbdev->dirty.y1;
- if (qfbdev->dirty.y2 > y2)
- y2 = qfbdev->dirty.y2;
- if (qfbdev->dirty.x1 < x)
- x = qfbdev->dirty.x1;
- if (qfbdev->dirty.x2 > x2)
- x2 = qfbdev->dirty.x2;
+ if ((qfbdev->dirty.y2 - qfbdev->dirty.y1) &&
+ (qfbdev->dirty.x2 - qfbdev->dirty.x1)) {
+ if (qfbdev->dirty.y1 < y)
+ y = qfbdev->dirty.y1;
+ if (qfbdev->dirty.y2 > y2)
+ y2 = qfbdev->dirty.y2;
+ if (qfbdev->dirty.x1 < x)
+ x = qfbdev->dirty.x1;
+ if (qfbdev->dirty.x2 > x2)
+ x2 = qfbdev->dirty.x2;
+ }
qfbdev->dirty.x1 = x;
qfbdev->dirty.x2 = x2;
idr_ret = qxl_release_alloc(qdev, QXL_RELEASE_SURFACE_CMD, release);
if (idr_ret < 0)
return idr_ret;
- bo = qxl_bo_ref(to_qxl_bo(entry->tv.bo));
+ bo = to_qxl_bo(entry->tv.bo);
(*release)->release_offset = create_rel->release_offset + 64;
info = qxl_release_map(qdev, *release);
info->id = idr_ret;
qxl_release_unmap(qdev, *release, info);
-
- qxl_bo_unref(&bo);
return 0;
}
backlight_update_status(bd);
DRM_INFO("radeon atom DIG backlight initialized\n");
+ rdev->mode_info.bl_encoder = radeon_encoder;
return;
} else
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ if (rdev->mode_info.bl_encoder) {
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- atombios_set_backlight_level(radeon_encoder, dig->backlight_level);
+ atombios_set_backlight_level(radeon_encoder, dig->backlight_level);
+ } else {
+ args.ucAction = ATOM_LCD_BLON;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ }
}
break;
case DRM_MODE_DPMS_STANDBY:
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
}
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- atombios_set_backlight_level(radeon_encoder, dig->backlight_level);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ if (rdev->mode_info.bl_encoder)
+ atombios_set_backlight_level(radeon_encoder, dig->backlight_level);
+ else
+ atombios_dig_transmitter_setup(encoder,
+ ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
+ }
if (ext_encoder)
atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
break;
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct radeon_dpm dpm;
};
radeon_fbdev_init(rdev);
drm_kms_helper_poll_init(rdev->ddev);
- if (rdev->pm.dpm_enabled) {
- /* do dpm late init */
- ret = radeon_pm_late_init(rdev);
- if (ret) {
- rdev->pm.dpm_enabled = false;
- DRM_ERROR("radeon_pm_late_init failed, disabling dpm\n");
- }
- /* set the dpm state for PX since there won't be
- * a modeset to call this.
- */
- radeon_pm_compute_clocks(rdev);
- }
+ /* do pm late init */
+ ret = radeon_pm_late_init(rdev);
return 0;
}
radeon_connector->mst_encoder = radeon_dp_create_fake_mst_encoder(master);
drm_object_attach_property(&connector->base, dev->mode_config.path_property, 0);
+ drm_object_attach_property(&connector->base, dev->mode_config.tile_property, 0);
drm_mode_connector_set_path_property(connector, pathprop);
return connector;
radeon_atom_backlight_init(radeon_encoder, connector);
else
radeon_legacy_backlight_init(radeon_encoder, connector);
- rdev->mode_info.bl_encoder = radeon_encoder;
}
}
{
drm_fb_helper_remove_one_connector(&rdev->mode_info.rfbdev->helper, connector);
}
+
+void radeon_fbdev_restore_mode(struct radeon_device *rdev)
+{
+ struct radeon_fbdev *rfbdev = rdev->mode_info.rfbdev;
+ struct drm_fb_helper *fb_helper;
+ int ret;
+
+ if (!rfbdev)
+ return;
+
+ fb_helper = &rfbdev->helper;
+
+ ret = drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
+ if (ret)
+ DRM_DEBUG("failed to restore crtc mode\n");
+}
* Outdated mess for old drm with Xorg being in charge (void function now).
*/
/**
- * radeon_driver_firstopen_kms - drm callback for last close
+ * radeon_driver_lastclose_kms - drm callback for last close
*
* @dev: drm dev pointer
*
*/
void radeon_driver_lastclose_kms(struct drm_device *dev)
{
+ struct radeon_device *rdev = dev->dev_private;
+
+ radeon_fbdev_restore_mode(rdev);
vga_switcheroo_process_delayed_switch();
}
backlight_update_status(bd);
DRM_INFO("radeon legacy LVDS backlight initialized\n");
+ rdev->mode_info.bl_encoder = radeon_encoder;
return;
void radeon_fbdev_fini(struct radeon_device *rdev);
void radeon_fbdev_set_suspend(struct radeon_device *rdev, int state);
bool radeon_fbdev_robj_is_fb(struct radeon_device *rdev, struct radeon_bo *robj);
+void radeon_fbdev_restore_mode(struct radeon_device *rdev);
void radeon_fb_output_poll_changed(struct radeon_device *rdev);
struct radeon_device *rdev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (rdev->pm.pm_method != PM_METHOD_DPM &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
INIT_DELAYED_WORK(&rdev->pm.dynpm_idle_work, radeon_dynpm_idle_work_handler);
if (rdev->pm.num_power_states > 1) {
- /* where's the best place to put these? */
- ret = device_create_file(rdev->dev, &dev_attr_power_profile);
- if (ret)
- DRM_ERROR("failed to create device file for power profile\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_method);
- if (ret)
- DRM_ERROR("failed to create device file for power method\n");
-
if (radeon_debugfs_pm_init(rdev)) {
DRM_ERROR("Failed to register debugfs file for PM!\n");
}
goto dpm_failed;
rdev->pm.dpm_enabled = true;
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- /* XXX: these are noops for dpm but are here for backwards compat */
- ret = device_create_file(rdev->dev, &dev_attr_power_profile);
- if (ret)
- DRM_ERROR("failed to create device file for power profile\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_method);
- if (ret)
- DRM_ERROR("failed to create device file for power method\n");
-
if (radeon_debugfs_pm_init(rdev)) {
DRM_ERROR("Failed to register debugfs file for dpm!\n");
}
int ret = 0;
if (rdev->pm.pm_method == PM_METHOD_DPM) {
- mutex_lock(&rdev->pm.mutex);
- ret = radeon_dpm_late_enable(rdev);
- mutex_unlock(&rdev->pm.mutex);
+ if (rdev->pm.dpm_enabled) {
+ if (!rdev->pm.sysfs_initialized) {
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ /* XXX: these are noops for dpm but are here for backwards compat */
+ ret = device_create_file(rdev->dev, &dev_attr_power_profile);
+ if (ret)
+ DRM_ERROR("failed to create device file for power profile\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_method);
+ if (ret)
+ DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
+ }
+
+ mutex_lock(&rdev->pm.mutex);
+ ret = radeon_dpm_late_enable(rdev);
+ mutex_unlock(&rdev->pm.mutex);
+ if (ret) {
+ rdev->pm.dpm_enabled = false;
+ DRM_ERROR("radeon_pm_late_init failed, disabling dpm\n");
+ } else {
+ /* set the dpm state for PX since there won't be
+ * a modeset to call this.
+ */
+ radeon_pm_compute_clocks(rdev);
+ }
+ }
+ } else {
+ if ((rdev->pm.num_power_states > 1) &&
+ (!rdev->pm.sysfs_initialized)) {
+ /* where's the best place to put these? */
+ ret = device_create_file(rdev->dev, &dev_attr_power_profile);
+ if (ret)
+ DRM_ERROR("failed to create device file for power profile\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_method);
+ if (ret)
+ DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
+ }
}
return ret;
}
{ PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 },
{ PCI_VENDOR_ID_ATI, 0x6810, 0x174b, 0xe271, 85000, 90000 },
{ PCI_VENDOR_ID_ATI, 0x6811, 0x1762, 0x2015, 0, 120000 },
+ { PCI_VENDOR_ID_ATI, 0x6811, 0x1043, 0x2015, 0, 120000 },
{ 0, 0, 0, 0 },
};
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct virtio_gpu_device *vgdev = node->minor->dev->dev_private;
- seq_printf(m, "fence %ld %lld\n",
- atomic64_read(&vgdev->fence_drv.last_seq),
+ seq_printf(m, "fence %llu %lld\n",
+ (u64)atomic64_read(&vgdev->fence_drv.last_seq),
vgdev->fence_drv.sync_seq);
return 0;
}
{
struct virtio_gpu_fence *fence = to_virtio_fence(f);
- snprintf(str, size, "%lu", atomic64_read(&fence->drv->last_seq));
+ snprintf(str, size, "%llu", (u64)atomic64_read(&fence->drv->last_seq));
}
static const struct fence_ops virtio_fence_ops = {
*
* Calls vmw_cmdbuf_ctx_process() on all contexts. If any context has
* command buffers left that are not submitted to hardware, Make sure
- * IRQ handling is turned on. Otherwise, make sure it's turned off. This
- * function may return -EAGAIN to indicate it should be rerun due to
- * possibly missed IRQs if IRQs has just been turned on.
+ * IRQ handling is turned on. Otherwise, make sure it's turned off.
*/
-static int vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
+static void vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
{
- int notempty = 0;
+ int notempty;
struct vmw_cmdbuf_context *ctx;
int i;
+retry:
+ notempty = 0;
for_each_cmdbuf_ctx(man, i, ctx)
vmw_cmdbuf_ctx_process(man, ctx, ¬empty);
man->irq_on = true;
/* Rerun in case we just missed an irq. */
- return -EAGAIN;
+ goto retry;
}
-
- return 0;
}
/**
header->cb_context = cb_context;
list_add_tail(&header->list, &man->ctx[cb_context].submitted);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
}
/**
struct vmw_cmdbuf_man *man = (struct vmw_cmdbuf_man *) data;
spin_lock(&man->lock);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
spin_unlock(&man->lock);
}
struct vmw_cmdbuf_man *man =
container_of(work, struct vmw_cmdbuf_man, work);
struct vmw_cmdbuf_header *entry, *next;
+ uint32_t dummy;
bool restart = false;
spin_lock_bh(&man->lock);
if (restart && vmw_cmdbuf_startstop(man, true))
DRM_ERROR("Failed restarting command buffer context 0.\n");
+ /* Send a new fence in case one was removed */
+ vmw_fifo_send_fence(man->dev_priv, &dummy);
}
/**
DRM_MM_SEARCH_DEFAULT,
DRM_MM_CREATE_DEFAULT);
if (ret) {
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
ret = drm_mm_insert_node_generic(&man->mm, info->node,
info->page_size, 0, 0,
DRM_MM_SEARCH_DEFAULT,
drm_mm_init(&man->mm, 0, size >> PAGE_SHIFT);
man->has_pool = true;
- man->default_size = default_size;
+
+ /*
+ * For now, set the default size to VMW_CMDBUF_INLINE_SIZE to
+ * prevent deadlocks from happening when vmw_cmdbuf_space_pool()
+ * needs to wait for space and we block on further command
+ * submissions to be able to free up space.
+ */
+ man->default_size = VMW_CMDBUF_INLINE_SIZE;
DRM_INFO("Using command buffers with %s pool.\n",
(man->using_mob) ? "MOB" : "DMA");
struct vmw_resource *res = &user_srf->srf.res;
*p_base = NULL;
- ttm_base_object_unref(&user_srf->backup_base);
+ if (user_srf->backup_base)
+ ttm_base_object_unref(&user_srf->backup_base);
vmw_resource_unreference(&res);
}
}
if (interlaced) {
- dc_link_event(dc, DC_EVT_NL, 0, 3);
- dc_link_event(dc, DC_EVT_EOL, 0, 2);
- dc_link_event(dc, DC_EVT_NEW_DATA, 0, 1);
+ int addr;
+
+ if (dc->di)
+ addr = 1;
+ else
+ addr = 0;
+
+ dc_link_event(dc, DC_EVT_NL, addr, 3);
+ dc_link_event(dc, DC_EVT_EOL, addr, 2);
+ dc_link_event(dc, DC_EVT_NEW_DATA, addr, 1);
/* Init template microcode */
- dc_write_tmpl(dc, 0, WROD(0), 0, map, SYNC_WAVE, 0, 8, 1);
+ dc_write_tmpl(dc, addr, WROD(0), 0, map, SYNC_WAVE, 0, 6, 1);
} else {
if (dc->di) {
dc_link_event(dc, DC_EVT_NL, 2, 3);
DI_SYNC_HSYNC = 3,
DI_SYNC_VSYNC = 4,
DI_SYNC_DE = 6,
+
+ DI_SYNC_CNT1 = 2, /* counter >= 2 only */
+ DI_SYNC_CNT4 = 5, /* counter >= 5 only */
+ DI_SYNC_CNT5 = 6, /* counter >= 6 only */
};
#define SYNC_WAVE 0
sig->mode.hback_porch + sig->mode.hfront_porch;
u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
sig->mode.vback_porch + sig->mode.vfront_porch;
- u32 reg;
struct di_sync_config cfg[] = {
{
- .run_count = h_total / 2 - 1,
- .run_src = DI_SYNC_CLK,
+ /* 1: internal VSYNC for each frame */
+ .run_count = v_total * 2 - 1,
+ .run_src = 3, /* == counter 7 */
}, {
- .run_count = h_total - 11,
+ /* PIN2: HSYNC waveform */
+ .run_count = h_total - 1,
.run_src = DI_SYNC_CLK,
- .cnt_down = 4,
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = DI_SYNC_CLK,
+ .cnt_down = sig->mode.hsync_len * 2,
}, {
- .run_count = v_total * 2 - 1,
- .run_src = DI_SYNC_INT_HSYNC,
- .offset_count = 1,
- .offset_src = DI_SYNC_INT_HSYNC,
- .cnt_down = 4,
+ /* PIN3: VSYNC waveform */
+ .run_count = v_total - 1,
+ .run_src = 4, /* == counter 7 */
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = 4, /* == counter 7 */
+ .cnt_down = sig->mode.vsync_len * 2,
+ .cnt_clr_src = DI_SYNC_CNT1,
}, {
- .run_count = v_total / 2 - 1,
+ /* 4: Field */
+ .run_count = v_total / 2,
.run_src = DI_SYNC_HSYNC,
- .offset_count = sig->mode.vback_porch,
- .offset_src = DI_SYNC_HSYNC,
+ .offset_count = h_total / 2,
+ .offset_src = DI_SYNC_CLK,
.repeat_count = 2,
- .cnt_clr_src = DI_SYNC_VSYNC,
- }, {
- .run_src = DI_SYNC_HSYNC,
- .repeat_count = sig->mode.vactive / 2,
- .cnt_clr_src = 4,
- }, {
- .run_count = v_total - 1,
- .run_src = DI_SYNC_HSYNC,
+ .cnt_clr_src = DI_SYNC_CNT1,
}, {
- .run_count = v_total / 2 - 1,
+ /* 5: Active lines */
.run_src = DI_SYNC_HSYNC,
- .offset_count = 9,
+ .offset_count = (sig->mode.vsync_len +
+ sig->mode.vback_porch) / 2,
.offset_src = DI_SYNC_HSYNC,
- .repeat_count = 2,
- .cnt_clr_src = DI_SYNC_VSYNC,
+ .repeat_count = sig->mode.vactive / 2,
+ .cnt_clr_src = DI_SYNC_CNT4,
}, {
+ /* 6: Active pixel, referenced by DC */
.run_src = DI_SYNC_CLK,
- .offset_count = sig->mode.hback_porch,
+ .offset_count = sig->mode.hsync_len +
+ sig->mode.hback_porch,
.offset_src = DI_SYNC_CLK,
.repeat_count = sig->mode.hactive,
- .cnt_clr_src = 5,
+ .cnt_clr_src = DI_SYNC_CNT5,
}, {
- .run_count = v_total - 1,
- .run_src = DI_SYNC_INT_HSYNC,
- .offset_count = v_total / 2,
- .offset_src = DI_SYNC_INT_HSYNC,
- .cnt_clr_src = DI_SYNC_HSYNC,
- .cnt_down = 4,
+ /* 7: Half line HSYNC */
+ .run_count = h_total / 2 - 1,
+ .run_src = DI_SYNC_CLK,
}
};
ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
- /* set gentime select and tag sel */
- reg = ipu_di_read(di, DI_SW_GEN1(9));
- reg &= 0x1FFFFFFF;
- reg |= (3 - 1) << 29 | 0x00008000;
- ipu_di_write(di, reg, DI_SW_GEN1(9));
-
ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
}
}
EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
+static u32 ipu_di_gen_polarity(int pin)
+{
+ switch (pin) {
+ case 1:
+ return DI_GEN_POLARITY_1;
+ case 2:
+ return DI_GEN_POLARITY_2;
+ case 3:
+ return DI_GEN_POLARITY_3;
+ case 4:
+ return DI_GEN_POLARITY_4;
+ case 5:
+ return DI_GEN_POLARITY_5;
+ case 6:
+ return DI_GEN_POLARITY_6;
+ case 7:
+ return DI_GEN_POLARITY_7;
+ case 8:
+ return DI_GEN_POLARITY_8;
+ }
+ return 0;
+}
+
int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
{
u32 reg;
/* set y_sel = 1 */
di_gen |= 0x10000000;
- di_gen |= DI_GEN_POLARITY_5;
- di_gen |= DI_GEN_POLARITY_8;
-
- vsync_cnt = 7;
- if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
- di_gen |= DI_GEN_POLARITY_3;
- if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
- di_gen |= DI_GEN_POLARITY_2;
+ vsync_cnt = 3;
} else {
ipu_di_sync_config_noninterlaced(di, sig, div);
*/
if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
vsync_cnt = 6;
-
- if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH) {
- if (sig->hsync_pin == 2)
- di_gen |= DI_GEN_POLARITY_2;
- else if (sig->hsync_pin == 4)
- di_gen |= DI_GEN_POLARITY_4;
- else if (sig->hsync_pin == 7)
- di_gen |= DI_GEN_POLARITY_7;
- }
- if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH) {
- if (sig->vsync_pin == 3)
- di_gen |= DI_GEN_POLARITY_3;
- else if (sig->vsync_pin == 6)
- di_gen |= DI_GEN_POLARITY_6;
- else if (sig->vsync_pin == 8)
- di_gen |= DI_GEN_POLARITY_8;
- }
}
+ if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
+ di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
+ if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
+ di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
+
if (sig->clk_pol)
di_gen |= DI_GEN_POLARITY_DISP_CLK;
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_ARM_SCPI
+ tristate "ARM SCPI Sensors"
+ depends on ARM_SCPI_PROTOCOL
+ help
+ This driver provides support for temperature, voltage, current
+ and power sensors available on ARM Ltd's SCP based platforms. The
+ actual number and type of sensors exported depend on the platform.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
--- /dev/null
+/*
+ * System Control and Power Interface(SCPI) based hwmon sensor driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Punit Agrawal <punit.agrawal@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct sensor_data {
+ struct scpi_sensor_info info;
+ struct device_attribute dev_attr_input;
+ struct device_attribute dev_attr_label;
+ char input[20];
+ char label[20];
+};
+
+struct scpi_thermal_zone {
+ struct list_head list;
+ int sensor_id;
+ struct scpi_sensors *scpi_sensors;
+ struct thermal_zone_device *tzd;
+};
+
+struct scpi_sensors {
+ struct scpi_ops *scpi_ops;
+ struct sensor_data *data;
+ struct list_head thermal_zones;
+ struct attribute **attrs;
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+};
+
+static int scpi_read_temp(void *dev, int *temp)
+{
+ struct scpi_thermal_zone *zone = dev;
+ struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
+ struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+ struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
+ u32 value;
+ int ret;
+
+ ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+ if (ret)
+ return ret;
+
+ *temp = value;
+ return 0;
+}
+
+/* hwmon callback functions */
+static ssize_t
+scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
+ struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+ struct sensor_data *sensor;
+ u32 value;
+ int ret;
+
+ sensor = container_of(attr, struct sensor_data, dev_attr_input);
+
+ ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t
+scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_data *sensor;
+
+ sensor = container_of(attr, struct sensor_data, dev_attr_label);
+
+ return sprintf(buf, "%s\n", sensor->info.name);
+}
+
+static void
+unregister_thermal_zones(struct platform_device *pdev,
+ struct scpi_sensors *scpi_sensors)
+{
+ struct list_head *pos;
+
+ list_for_each(pos, &scpi_sensors->thermal_zones) {
+ struct scpi_thermal_zone *zone;
+
+ zone = list_entry(pos, struct scpi_thermal_zone, list);
+ thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
+ }
+}
+
+static struct thermal_zone_of_device_ops scpi_sensor_ops = {
+ .get_temp = scpi_read_temp,
+};
+
+static int scpi_hwmon_probe(struct platform_device *pdev)
+{
+ u16 nr_sensors, i;
+ int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+ struct scpi_ops *scpi_ops;
+ struct device *hwdev, *dev = &pdev->dev;
+ struct scpi_sensors *scpi_sensors;
+ int ret;
+
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EPROBE_DEFER;
+
+ ret = scpi_ops->sensor_get_capability(&nr_sensors);
+ if (ret)
+ return ret;
+
+ if (!nr_sensors)
+ return -ENODEV;
+
+ scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
+ if (!scpi_sensors)
+ return -ENOMEM;
+
+ scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
+ sizeof(*scpi_sensors->data), GFP_KERNEL);
+ if (!scpi_sensors->data)
+ return -ENOMEM;
+
+ scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
+ sizeof(*scpi_sensors->attrs), GFP_KERNEL);
+ if (!scpi_sensors->attrs)
+ return -ENOMEM;
+
+ scpi_sensors->scpi_ops = scpi_ops;
+
+ for (i = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[i];
+
+ ret = scpi_ops->sensor_get_info(i, &sensor->info);
+ if (ret)
+ return ret;
+
+ switch (sensor->info.class) {
+ case TEMPERATURE:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "temp%d_input", num_temp + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "temp%d_label", num_temp + 1);
+ num_temp++;
+ break;
+ case VOLTAGE:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "in%d_input", num_volt);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "in%d_label", num_volt);
+ num_volt++;
+ break;
+ case CURRENT:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "curr%d_input", num_current + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "curr%d_label", num_current + 1);
+ num_current++;
+ break;
+ case POWER:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "power%d_input", num_power + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "power%d_label", num_power + 1);
+ num_power++;
+ break;
+ default:
+ break;
+ }
+
+ sensor->dev_attr_input.attr.mode = S_IRUGO;
+ sensor->dev_attr_input.show = scpi_show_sensor;
+ sensor->dev_attr_input.attr.name = sensor->input;
+
+ sensor->dev_attr_label.attr.mode = S_IRUGO;
+ sensor->dev_attr_label.show = scpi_show_label;
+ sensor->dev_attr_label.attr.name = sensor->label;
+
+ scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
+ scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+
+ sysfs_attr_init(scpi_sensors->attrs[i << 1]);
+ sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+ }
+
+ scpi_sensors->group.attrs = scpi_sensors->attrs;
+ scpi_sensors->groups[0] = &scpi_sensors->group;
+
+ platform_set_drvdata(pdev, scpi_sensors);
+
+ hwdev = devm_hwmon_device_register_with_groups(dev,
+ "scpi_sensors", scpi_sensors, scpi_sensors->groups);
+
+ if (IS_ERR(hwdev))
+ return PTR_ERR(hwdev);
+
+ /*
+ * Register the temperature sensors with the thermal framework
+ * to allow their usage in setting up the thermal zones from
+ * device tree.
+ *
+ * NOTE: Not all temperature sensors maybe used for thermal
+ * control
+ */
+ INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
+ for (i = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[i];
+ struct scpi_thermal_zone *zone;
+
+ if (sensor->info.class != TEMPERATURE)
+ continue;
+
+ zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+ if (!zone) {
+ ret = -ENOMEM;
+ goto unregister_tzd;
+ }
+
+ zone->sensor_id = i;
+ zone->scpi_sensors = scpi_sensors;
+ zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
+ &scpi_sensor_ops);
+ /*
+ * The call to thermal_zone_of_sensor_register returns
+ * an error for sensors that are not associated with
+ * any thermal zones or if the thermal subsystem is
+ * not configured.
+ */
+ if (IS_ERR(zone->tzd)) {
+ devm_kfree(dev, zone);
+ continue;
+ }
+ list_add(&zone->list, &scpi_sensors->thermal_zones);
+ }
+
+ return 0;
+
+unregister_tzd:
+ unregister_thermal_zones(pdev, scpi_sensors);
+ return ret;
+}
+
+static int scpi_hwmon_remove(struct platform_device *pdev)
+{
+ struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
+
+ unregister_thermal_zones(pdev, scpi_sensors);
+
+ return 0;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+ {.compatible = "arm,scpi-sensors"},
+ {},
+};
+
+static struct platform_driver scpi_hwmon_platdrv = {
+ .driver = {
+ .name = "scpi-hwmon",
+ .owner = THIS_MODULE,
+ .of_match_table = scpi_of_match,
+ },
+ .probe = scpi_hwmon_probe,
+ .remove = scpi_hwmon_remove,
+};
+module_platform_driver(scpi_hwmon_platdrv);
+
+MODULE_AUTHOR("Punit Agrawal <punit.agrawal@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
+MODULE_LICENSE("GPL v2");
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
}
#ifdef CONFIG_ACPI
+/*
+ * The HCNT/LCNT information coming from ACPI should be the most accurate
+ * for given platform. However, some systems get it wrong. On such systems
+ * we get better results by calculating those based on the input clock.
+ */
+static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
+ {
+ .ident = "Dell Inspiron 7348",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
+ },
+ },
+ { }
+};
+
static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
u16 *hcnt, u16 *lcnt, u32 *sda_hold)
{
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
union acpi_object *obj;
+ if (dmi_check_system(dw_i2c_no_acpi_params))
+ return;
+
if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
return;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- r = i2c_add_numbered_adapter(adap);
- if (r) {
- dev_err(&pdev->dev, "failure adding adapter\n");
- return r;
- }
-
if (dev->pm_runtime_disabled) {
pm_runtime_forbid(&pdev->dev);
} else {
pm_runtime_enable(&pdev->dev);
}
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ pm_runtime_disable(&pdev->dev);
+ return r;
+ }
+
return 0;
}
#include <linux/acpi.h>
#include <linux/interrupt.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
/* PCI Address Constants */
#define SMBBAR 0
struct i2c_msg *msgs = drv_data->msgs;
int num = drv_data->num_msgs;
- return false;
-
if (!drv_data->offload_enabled)
return false;
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- return clk_enable(alg_data->clk);
+ return clk_prepare_enable(alg_data->clk);
}
static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
if (IS_ERR(alg_data->ioaddr))
return PTR_ERR(alg_data->ioaddr);
- ret = clk_enable(alg_data->clk);
+ ret = clk_prepare_enable(alg_data->clk);
if (ret)
return ret;
return 0;
out_clock:
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return ret;
}
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
i2c_del_adapter(&alg_data->adapter);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
return ret;
}
+ pm_runtime_enable(dev);
+ platform_set_drvdata(pdev, priv);
+
ret = i2c_add_numbered_adapter(adap);
if (ret < 0) {
dev_err(dev, "reg adap failed: %d\n", ret);
+ pm_runtime_disable(dev);
return ret;
}
- pm_runtime_enable(dev);
- platform_set_drvdata(pdev, priv);
-
dev_info(dev, "probed\n");
return 0;
i2c->adap.nr = i2c->pdata->bus_num;
i2c->adap.dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, i2c);
+
+ pm_runtime_enable(&pdev->dev);
+
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ pm_runtime_disable(&pdev->dev);
s3c24xx_i2c_deregister_cpufreq(i2c);
clk_unprepare(i2c->clk);
return ret;
}
- platform_set_drvdata(pdev, i2c);
-
- pm_runtime_enable(&pdev->dev);
pm_runtime_enable(&i2c->adap.dev);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
goto err_clear_wakeup_irq;
status = dev_pm_domain_attach(&client->dev, true);
- if (status != -EPROBE_DEFER) {
- status = driver->probe(client, i2c_match_id(driver->id_table,
- client));
- if (status)
- goto err_detach_pm_domain;
- }
+ if (status == -EPROBE_DEFER)
+ goto err_clear_wakeup_irq;
+
+ status = driver->probe(client, i2c_match_id(driver->id_table, client));
+ if (status)
+ goto err_detach_pm_domain;
return 0;
#define ST_ACCEL_4_BDU_MASK 0x40
#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
-#define ST_ACCEL_4_IG1_EN_ADDR 0x21
-#define ST_ACCEL_4_IG1_EN_MASK 0x08
#define ST_ACCEL_4_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 5 */
.drdy_irq = {
.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
- .ig1 = {
- .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
- .en_mask = ST_ACCEL_4_IG1_EN_MASK,
- },
},
.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
.bootime = 2, /* guess */
#include <linux/types.h>
#include <linux/gfp.h>
#include <linux/err.h>
+#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
+#define TWL4030_USB_SEL_MADC_MCPC (1<<3)
+#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB
+
/**
* struct twl4030_madc_data - a container for madc info
* @dev: Pointer to device structure for madc
* @lock: Mutex protecting this data structure
+ * @regulator: Pointer to bias regulator for madc
* @requests: Array of request struct corresponding to SW1, SW2 and RT
* @use_second_irq: IRQ selection (main or co-processor)
* @imr: Interrupt mask register of MADC
struct twl4030_madc_data {
struct device *dev;
struct mutex lock; /* mutex protecting this data structure */
+ struct regulator *usb3v1;
struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
bool use_second_irq;
u8 imr;
}
twl4030_madc = madc;
+ /* Configure MADC[3:6] */
+ ret = twl_i2c_read_u8(TWL_MODULE_USB, ®val,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+ regval |= TWL4030_USB_SEL_MADC_MCPC;
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, regval,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+
+ /* Enable 3v1 bias regulator for MADC[3:6] */
+ madc->usb3v1 = devm_regulator_get(madc->dev, "vusb3v1");
+ if (IS_ERR(madc->usb3v1))
+ return -ENODEV;
+
+ ret = regulator_enable(madc->usb3v1);
+ if (ret)
+ dev_err(madc->dev, "could not enable 3v1 bias regulator\n");
+
ret = iio_device_register(iio_dev);
if (ret) {
dev_err(&pdev->dev, "could not register iio device\n");
twl4030_madc_set_current_generator(madc, 0, 0);
twl4030_madc_set_power(madc, 0);
+ regulator_disable(madc->usb3v1);
+
return 0;
}
memset(&gid_attr, 0, sizeof(gid_attr));
gid_attr.ndev = ndev;
+ mutex_lock(&table->lock);
ix = find_gid(table, NULL, NULL, true, GID_ATTR_FIND_MASK_DEFAULT);
/* Coudn't find default GID location */
WARN_ON(ix < 0);
- mutex_lock(&table->lock);
if (!__ib_cache_gid_get(ib_dev, port, ix,
¤t_gid, ¤t_gid_attr) &&
mode == IB_CACHE_GID_DEFAULT_MODE_SET &&
case IB_CM_SIDR_REQ_RCVD:
spin_unlock_irq(&cm_id_priv->lock);
cm_reject_sidr_req(cm_id_priv, IB_SIDR_REJECT);
+ spin_lock_irq(&cm.lock);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node))
+ rb_erase(&cm_id_priv->sidr_id_node,
+ &cm.remote_sidr_table);
+ spin_unlock_irq(&cm.lock);
break;
case IB_CM_REQ_SENT:
case IB_CM_MRA_REQ_RCVD:
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
spin_lock_irqsave(&cm.lock, flags);
- rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node)) {
+ rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ RB_CLEAR_NODE(&cm_id_priv->sidr_id_node);
+ }
spin_unlock_irqrestore(&cm.lock, flags);
return 0;
sizeof(req->local_gid));
req->has_gid = true;
req->service_id = req_param->primary_path->service_id;
- req->pkey = req_param->bth_pkey;
+ req->pkey = be16_to_cpu(req_param->primary_path->pkey);
break;
case IB_CM_SIDR_REQ_RECEIVED:
req->device = sidr_param->listen_id->device;
req->port = sidr_param->port;
req->has_gid = false;
req->service_id = sidr_param->service_id;
- req->pkey = sidr_param->bth_pkey;
+ req->pkey = sidr_param->pkey;
break;
default:
return -EINVAL;
return true;
}
+static bool cma_protocol_roce_dev_port(struct ib_device *device, int port_num)
+{
+ enum rdma_link_layer ll = rdma_port_get_link_layer(device, port_num);
+ enum rdma_transport_type transport =
+ rdma_node_get_transport(device->node_type);
+
+ return ll == IB_LINK_LAYER_ETHERNET && transport == RDMA_TRANSPORT_IB;
+}
+
+static bool cma_protocol_roce(const struct rdma_cm_id *id)
+{
+ struct ib_device *device = id->device;
+ const int port_num = id->port_num ?: rdma_start_port(device);
+
+ return cma_protocol_roce_dev_port(device, port_num);
+}
+
static bool cma_match_net_dev(const struct rdma_id_private *id_priv,
const struct net_device *net_dev)
{
const struct rdma_addr *addr = &id_priv->id.route.addr;
if (!net_dev)
- /* This request is an AF_IB request */
- return addr->src_addr.ss_family == AF_IB;
+ /* This request is an AF_IB request or a RoCE request */
+ return addr->src_addr.ss_family == AF_IB ||
+ cma_protocol_roce(&id_priv->id);
return !addr->dev_addr.bound_dev_if ||
(net_eq(dev_net(net_dev), &init_net) &&
if (PTR_ERR(*net_dev) == -EAFNOSUPPORT) {
/* Assuming the protocol is AF_IB */
*net_dev = NULL;
+ } else if (cma_protocol_roce_dev_port(req.device, req.port)) {
+ /* TODO find the net dev matching the request parameters
+ * through the RoCE GID table */
+ *net_dev = NULL;
} else {
return ERR_CAST(*net_dev);
}
bind_list = cma_ps_find(rdma_ps_from_service_id(req.service_id),
cma_port_from_service_id(req.service_id));
id_priv = cma_find_listener(bind_list, cm_id, ib_event, &req, *net_dev);
- if (IS_ERR(id_priv)) {
+ if (IS_ERR(id_priv) && *net_dev) {
dev_put(*net_dev);
*net_dev = NULL;
}
if (ret)
goto err;
} else {
- /* An AF_IB connection */
- WARN_ON_ONCE(ss_family != AF_IB);
-
- cma_translate_ib((struct sockaddr_ib *)cma_src_addr(id_priv),
- &rt->addr.dev_addr);
+ if (!cma_protocol_roce(listen_id) &&
+ cma_any_addr(cma_src_addr(id_priv))) {
+ rt->addr.dev_addr.dev_type = ARPHRD_INFINIBAND;
+ rdma_addr_set_sgid(&rt->addr.dev_addr, &rt->path_rec[0].sgid);
+ ib_addr_set_pkey(&rt->addr.dev_addr, be16_to_cpu(rt->path_rec[0].pkey));
+ } else if (!cma_any_addr(cma_src_addr(id_priv))) {
+ ret = cma_translate_addr(cma_src_addr(id_priv), &rt->addr.dev_addr);
+ if (ret)
+ goto err;
+ }
}
rdma_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid);
if (ret)
goto err;
} else {
- /* An AF_IB connection */
- WARN_ON_ONCE(ss_family != AF_IB);
-
- if (!cma_any_addr(cma_src_addr(id_priv)))
- cma_translate_ib((struct sockaddr_ib *)
- cma_src_addr(id_priv),
- &id->route.addr.dev_addr);
+ if (!cma_any_addr(cma_src_addr(id_priv))) {
+ ret = cma_translate_addr(cma_src_addr(id_priv),
+ &id->route.addr.dev_addr);
+ if (ret)
+ goto err;
+ }
}
id_priv->state = RDMA_CM_CONNECT;
u8 port, struct net_device *ndev)
{
struct in_device *in_dev;
+ struct sin_list {
+ struct list_head list;
+ struct sockaddr_in ip;
+ };
+ struct sin_list *sin_iter;
+ struct sin_list *sin_temp;
+ LIST_HEAD(sin_list);
if (ndev->reg_state >= NETREG_UNREGISTERING)
return;
- in_dev = in_dev_get(ndev);
- if (!in_dev)
+ rcu_read_lock();
+ in_dev = __in_dev_get_rcu(ndev);
+ if (!in_dev) {
+ rcu_read_unlock();
return;
+ }
for_ifa(in_dev) {
- struct sockaddr_in ip;
+ struct sin_list *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
- ip.sin_family = AF_INET;
- ip.sin_addr.s_addr = ifa->ifa_address;
- update_gid_ip(GID_ADD, ib_dev, port, ndev,
- (struct sockaddr *)&ip);
+ if (!entry) {
+ pr_warn("roce_gid_mgmt: couldn't allocate entry for IPv4 update\n");
+ continue;
+ }
+ entry->ip.sin_family = AF_INET;
+ entry->ip.sin_addr.s_addr = ifa->ifa_address;
+ list_add_tail(&entry->list, &sin_list);
}
endfor_ifa(in_dev);
+ rcu_read_unlock();
- in_dev_put(in_dev);
+ list_for_each_entry_safe(sin_iter, sin_temp, &sin_list, list) {
+ update_gid_ip(GID_ADD, ib_dev, port, ndev,
+ (struct sockaddr *)&sin_iter->ip);
+ list_del(&sin_iter->list);
+ kfree(sin_iter);
+ }
}
static void enum_netdev_ipv6_ips(struct ib_device *ib_dev,
if (!file)
return -ENOMEM;
+ file->close_wq = create_singlethread_workqueue("ucma_close_id");
+ if (!file->close_wq) {
+ kfree(file);
+ return -ENOMEM;
+ }
+
INIT_LIST_HEAD(&file->event_list);
INIT_LIST_HEAD(&file->ctx_list);
init_waitqueue_head(&file->poll_wait);
mutex_init(&file->mut);
- file->close_wq = create_singlethread_workqueue("ucma_close_id");
filp->private_data = file;
file->filp = filp;
* SOFTWARE.
*/
-#include <asm-generic/kmap_types.h>
+#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
+ * BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2014, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
/*
* Copyright (c) 2013, Cisco Systems, Inc. All rights reserved.
*
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
void ipoib_mcast_join_task(struct work_struct *work);
void ipoib_mcast_carrier_on_task(struct work_struct *work);
void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb);
+void ipoib_mcast_free(struct ipoib_mcast *mc);
void ipoib_mcast_restart_task(struct work_struct *work);
int ipoib_mcast_start_thread(struct net_device *dev);
out_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
- list_for_each_entry_safe(mcast, tmcast, &remove_list, list)
+ list_for_each_entry_safe(mcast, tmcast, &remove_list, list) {
ipoib_mcast_leave(dev, mcast);
+ ipoib_mcast_free(mcast);
+ }
}
static void ipoib_reap_neigh(struct work_struct *work)
queue_delayed_work(priv->wq, &priv->mcast_task, 0);
}
-static void ipoib_mcast_free(struct ipoib_mcast *mcast)
+void ipoib_mcast_free(struct ipoib_mcast *mcast)
{
struct net_device *dev = mcast->dev;
int tx_dropped = 0;
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
6-byte ALPS packet */
-#define ALPS_DELL 0x100 /* device is a Dell laptop */
+#define ALPS_STICK_BITS 0x100 /* separate stick button bits */
#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
static const struct alps_model_info alps_model_data[] = {
ALPS_PROTO_V8, 0x18, 0x18, 0
};
+/*
+ * Some v2 models report the stick buttons in separate bits
+ */
+static const struct dmi_system_id alps_dmi_has_separate_stick_buttons[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Extrapolated from other entries */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D420"),
+ },
+ },
+ {
+ /* Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D430"),
+ },
+ },
+ {
+ /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D620"),
+ },
+ },
+ {
+ /* Extrapolated from other entries */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D630"),
+ },
+ },
+#endif
+ { }
+};
+
static void alps_set_abs_params_st(struct alps_data *priv,
struct input_dev *dev1);
static void alps_set_abs_params_semi_mt(struct alps_data *priv,
return;
}
- /* Dell non interleaved V2 dualpoint has separate stick button bits */
- if (priv->proto_version == ALPS_PROTO_V2 &&
- priv->flags == (ALPS_DELL | ALPS_PASS | ALPS_DUALPOINT)) {
+ /* Some models have separate stick button bits */
+ if (priv->flags & ALPS_STICK_BITS) {
left |= packet[0] & 1;
right |= packet[0] & 2;
middle |= packet[0] & 4;
priv->byte0 = protocol->byte0;
priv->mask0 = protocol->mask0;
priv->flags = protocol->flags;
- if (dmi_name_in_vendors("Dell"))
- priv->flags |= ALPS_DELL;
priv->x_max = 2000;
priv->y_max = 1400;
priv->set_abs_params = alps_set_abs_params_st;
priv->x_max = 1023;
priv->y_max = 767;
+ if (dmi_check_system(alps_dmi_has_separate_stick_buttons))
+ priv->flags |= ALPS_STICK_BITS;
break;
case ALPS_PROTO_V3:
memcpy(&cyapa->product_id[13], &resp_data[62], 2);
cyapa->product_id[15] = '\0';
+ /* Get the number of Rx electrodes. */
rotat_align = resp_data[68];
- if (rotat_align) {
- cyapa->electrodes_rx = cyapa->electrodes_y;
- cyapa->electrodes_rx = cyapa->electrodes_y;
- } else {
- cyapa->electrodes_rx = cyapa->electrodes_x;
- cyapa->electrodes_rx = cyapa->electrodes_y;
- }
+ cyapa->electrodes_rx =
+ rotat_align ? cyapa->electrodes_y : cyapa->electrodes_x;
cyapa->aligned_electrodes_rx = (cyapa->electrodes_rx + 3) & ~3u;
if (!cyapa->electrodes_x || !cyapa->electrodes_y ||
config TOUCHSCREEN_SUR40
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
+ depends on VIDEO_V4L2
select INPUT_POLLDEV
select VIDEOBUF2_DMA_SG
help
static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m)
{
+ int value;
struct spi_transfer *t =
list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
if (ts->model == 7845) {
- return be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3;
+ value = be16_to_cpup((__be16 *)&(((char *)t->rx_buf)[1]));
} else {
/*
* adjust: on-wire is a must-ignore bit, a BE12 value, then
* padding; built from two 8 bit values written msb-first.
*/
- return be16_to_cpup((__be16 *)t->rx_buf) >> 3;
+ value = be16_to_cpup((__be16 *)t->rx_buf);
}
+
+ /* enforce ADC output is 12 bits width */
+ return (value >> 3) & 0xfff;
}
static void ads7846_update_value(struct spi_message *m, int val)
tsc_readl(tsc, LPC32XX_TSC_CON) &
~LPC32XX_TSC_ADCCON_AUTO_EN);
- clk_disable(tsc->clk);
+ clk_disable_unprepare(tsc->clk);
}
static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
{
u32 tmp;
- clk_enable(tsc->clk);
+ clk_prepare_enable(tsc->clk);
tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;
config IOMMU_IO_PGTABLE_LPAE
bool "ARMv7/v8 Long Descriptor Format"
select IOMMU_IO_PGTABLE
- # SWIOTLB guarantees a dma_to_phys() implementation
- depends on ARM || ARM64 || (COMPILE_TEST && SWIOTLB)
+ depends on HAS_DMA && (ARM || ARM64 || COMPILE_TEST)
help
Enable support for the ARM long descriptor pagetable format.
This allocator supports 4K/2M/1G, 16K/32M and 64K/512M page
static void clear_dte_entry(u16 devid)
{
/* remove entry from the device table seen by the hardware */
- amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
- amd_iommu_dev_table[devid].data[1] = 0;
+ amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
+ amd_iommu_dev_table[devid].data[1] &= DTE_FLAG_MASK;
amd_iommu_apply_erratum_63(devid);
}
{
struct amd_iommu *iommu;
+ /*
+ * First check if the device is still attached. It might already
+ * be detached from its domain because the generic
+ * iommu_detach_group code detached it and we try again here in
+ * our alias handling.
+ */
+ if (!dev_data->domain)
+ return;
+
iommu = amd_iommu_rlookup_table[dev_data->devid];
/* decrease reference counters */
if (!iommu->dev)
return -ENODEV;
+ /* Prevent binding other PCI device drivers to IOMMU devices */
+ iommu->dev->match_driver = false;
+
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
&iommu->cap);
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
+#define DTE_FLAG_MASK (0x3ffULL << 32)
#define DTE_FLAG_IOTLB (0x01UL << 32)
#define DTE_FLAG_GV (0x01ULL << 55)
#define DTE_GLX_SHIFT (56)
goto out;
}
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) {
+ /* handle_mm_fault would BUG_ON() */
+ up_read(&mm->mmap_sem);
+ handle_fault_error(fault);
+ goto out;
+ }
+
ret = handle_mm_fault(mm, vma, address, write);
if (ret & VM_FAULT_ERROR) {
/* failed to service fault */
#define IDR0_TTF_SHIFT 2
#define IDR0_TTF_MASK 0x3
#define IDR0_TTF_AARCH64 (2 << IDR0_TTF_SHIFT)
+#define IDR0_TTF_AARCH32_64 (3 << IDR0_TTF_SHIFT)
#define IDR0_S1P (1 << 1)
#define IDR0_S2P (1 << 0)
#define CMDQ_TLBI_0_VMID_SHIFT 32
#define CMDQ_TLBI_0_ASID_SHIFT 48
#define CMDQ_TLBI_1_LEAF (1UL << 0)
-#define CMDQ_TLBI_1_ADDR_MASK ~0xfffUL
+#define CMDQ_TLBI_1_VA_MASK ~0xfffUL
+#define CMDQ_TLBI_1_IPA_MASK 0xfffffffff000UL
#define CMDQ_PRI_0_SSID_SHIFT 12
#define CMDQ_PRI_0_SSID_MASK 0xfffffUL
break;
case CMDQ_OP_TLBI_NH_VA:
cmd[0] |= (u64)ent->tlbi.asid << CMDQ_TLBI_0_ASID_SHIFT;
- /* Fallthrough */
+ cmd[1] |= ent->tlbi.leaf ? CMDQ_TLBI_1_LEAF : 0;
+ cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_VA_MASK;
+ break;
case CMDQ_OP_TLBI_S2_IPA:
cmd[0] |= (u64)ent->tlbi.vmid << CMDQ_TLBI_0_VMID_SHIFT;
cmd[1] |= ent->tlbi.leaf ? CMDQ_TLBI_1_LEAF : 0;
- cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_ADDR_MASK;
+ cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_IPA_MASK;
break;
case CMDQ_OP_TLBI_NH_ASID:
cmd[0] |= (u64)ent->tlbi.asid << CMDQ_TLBI_0_ASID_SHIFT;
}
/* We only support the AArch64 table format at present */
- if ((reg & IDR0_TTF_MASK << IDR0_TTF_SHIFT) < IDR0_TTF_AARCH64) {
+ switch (reg & IDR0_TTF_MASK << IDR0_TTF_SHIFT) {
+ case IDR0_TTF_AARCH32_64:
+ smmu->ias = 40;
+ /* Fallthrough */
+ case IDR0_TTF_AARCH64:
+ break;
+ default:
dev_err(smmu->dev, "AArch64 table format not supported!\n");
return -ENXIO;
}
dev_warn(smmu->dev,
"failed to set DMA mask for table walker\n");
- if (!smmu->ias)
- smmu->ias = smmu->oas;
+ smmu->ias = max(smmu->ias, smmu->oas);
dev_info(smmu->dev, "ias %lu-bit, oas %lu-bit (features 0x%08x)\n",
smmu->ias, smmu->oas, smmu->features);
#include "fsl_pamu.h"
+#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/genalloc.h>
#include <asm/mpc85xx.h>
-#include <asm/fsl_guts.h>
/* define indexes for each operation mapping scenario */
#define OMI_QMAN 0x00
return -ENOMEM;
/* It is large page*/
if (largepage_lvl > 1) {
+ unsigned long nr_superpages, end_pfn;
+
pteval |= DMA_PTE_LARGE_PAGE;
lvl_pages = lvl_to_nr_pages(largepage_lvl);
+
+ nr_superpages = sg_res / lvl_pages;
+ end_pfn = iov_pfn + nr_superpages * lvl_pages - 1;
+
/*
* Ensure that old small page tables are
- * removed to make room for superpage,
- * if they exist.
+ * removed to make room for superpage(s).
*/
- dma_pte_free_pagetable(domain, iov_pfn,
- iov_pfn + lvl_pages - 1);
+ dma_pte_free_pagetable(domain, iov_pfn, end_pfn);
} else {
pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
}
if (ret) {
spin_unlock_irqrestore(&device_domain_lock, flags);
+ free_devinfo_mem(info);
return NULL;
}
static bool selftest_running = false;
-static dma_addr_t __arm_lpae_dma_addr(struct device *dev, void *pages)
+static dma_addr_t __arm_lpae_dma_addr(void *pages)
{
- return phys_to_dma(dev, virt_to_phys(pages));
+ return (dma_addr_t)virt_to_phys(pages);
}
static void *__arm_lpae_alloc_pages(size_t size, gfp_t gfp,
goto out_free;
/*
* We depend on the IOMMU being able to work with any physical
- * address directly, so if the DMA layer suggests it can't by
- * giving us back some translation, that bodes very badly...
+ * address directly, so if the DMA layer suggests otherwise by
+ * translating or truncating them, that bodes very badly...
*/
- if (dma != __arm_lpae_dma_addr(dev, pages))
+ if (dma != virt_to_phys(pages))
goto out_unmap;
}
static void __arm_lpae_free_pages(void *pages, size_t size,
struct io_pgtable_cfg *cfg)
{
- struct device *dev = cfg->iommu_dev;
-
if (!selftest_running)
- dma_unmap_single(dev, __arm_lpae_dma_addr(dev, pages),
+ dma_unmap_single(cfg->iommu_dev, __arm_lpae_dma_addr(pages),
size, DMA_TO_DEVICE);
free_pages_exact(pages, size);
}
static void __arm_lpae_set_pte(arm_lpae_iopte *ptep, arm_lpae_iopte pte,
struct io_pgtable_cfg *cfg)
{
- struct device *dev = cfg->iommu_dev;
-
*ptep = pte;
if (!selftest_running)
- dma_sync_single_for_device(dev, __arm_lpae_dma_addr(dev, ptep),
+ dma_sync_single_for_device(cfg->iommu_dev,
+ __arm_lpae_dma_addr(ptep),
sizeof(pte), DMA_TO_DEVICE);
}
if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS)
return NULL;
+ if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) {
+ dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n");
+ return NULL;
+ }
+
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return NULL;
handle_level_irq);
}
irq_set_probe(virq);
+ irq_clear_status_flags(virq, IRQ_NOAUTOEN);
return 0;
}
DECLARE_BITMAP(pcpu_mask, GIC_MAX_INTRS);
};
+static unsigned long __gic_base_addr;
static void __iomem *gic_base;
static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
static DEFINE_SPINLOCK(gic_lock);
GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_FDC));
}
+int gic_get_usm_range(struct resource *gic_usm_res)
+{
+ if (!gic_present)
+ return -1;
+
+ gic_usm_res->start = __gic_base_addr + USM_VISIBLE_SECTION_OFS;
+ gic_usm_res->end = gic_usm_res->start + (USM_VISIBLE_SECTION_SIZE - 1);
+
+ return 0;
+}
+
static void gic_handle_shared_int(bool chained)
{
unsigned int i, intr, virq, gic_reg_step = mips_cm_is64 ? 8 : 4;
{
unsigned int gicconfig;
+ __gic_base_addr = gic_base_addr;
+
gic_base = ioremap_nocache(gic_base_addr, gic_addrspace_size);
gicconfig = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
.irq_unmask = tegra_unmask,
.irq_retrigger = tegra_retrigger,
.irq_set_wake = tegra_set_wake,
+ .irq_set_type = irq_chip_set_type_parent,
.flags = IRQCHIP_MASK_ON_SUSPEND,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
l2_pull_iqueue(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
- struct sk_buff *skb;
+ struct sk_buff *skb, *nskb;
struct Layer2 *l2 = &st->l2;
u_char header[MAX_HEADER_LEN];
int i, hdr_space_needed;
return;
hdr_space_needed = l2headersize(l2, 0);
- if (hdr_space_needed > skb_headroom(skb)) {
- struct sk_buff *orig_skb = skb;
-
- skb = skb_realloc_headroom(skb, hdr_space_needed);
- if (!skb) {
- dev_kfree_skb(orig_skb);
- return;
- }
+ nskb = skb_realloc_headroom(skb, hdr_space_needed);
+ if (!nskb) {
+ skb_queue_head(&l2->i_queue, skb);
+ return;
}
spin_lock_irqsave(&l2->lock, flags);
if (test_bit(FLG_MOD128, &l2->flag))
p1);
dev_kfree_skb(l2->windowar[p1]);
}
- l2->windowar[p1] = skb_clone(skb, GFP_ATOMIC);
+ l2->windowar[p1] = skb;
i = sethdraddr(&st->l2, header, CMD);
l2->vs = (l2->vs + 1) % 8;
}
spin_unlock_irqrestore(&l2->lock, flags);
- memcpy(skb_push(skb, i), header, i);
- st->l2.l2l1(st, PH_PULL | INDICATION, skb);
+ memcpy(skb_push(nskb, i), header, i);
+ st->l2.l2l1(st, PH_PULL | INDICATION, nskb);
test_and_clear_bit(FLG_ACK_PEND, &st->l2.flag);
if (!test_and_set_bit(FLG_T200_RUN, &st->l2.flag)) {
FsmDelTimer(&st->l2.t203, 13);
l2_pull_iqueue(struct FsmInst *fi, int event, void *arg)
{
struct layer2 *l2 = fi->userdata;
- struct sk_buff *skb, *nskb, *oskb;
+ struct sk_buff *skb, *nskb;
u_char header[MAX_L2HEADER_LEN];
u_int i, p1;
skb = skb_dequeue(&l2->i_queue);
if (!skb)
return;
-
- if (test_bit(FLG_MOD128, &l2->flag))
- p1 = (l2->vs - l2->va) % 128;
- else
- p1 = (l2->vs - l2->va) % 8;
- p1 = (p1 + l2->sow) % l2->window;
- if (l2->windowar[p1]) {
- printk(KERN_WARNING "%s: l2 try overwrite ack queue entry %d\n",
- mISDNDevName4ch(&l2->ch), p1);
- dev_kfree_skb(l2->windowar[p1]);
- }
- l2->windowar[p1] = skb;
i = sethdraddr(l2, header, CMD);
if (test_bit(FLG_MOD128, &l2->flag)) {
header[i++] = l2->vs << 1;
header[i++] = l2->vr << 1;
+ } else
+ header[i++] = (l2->vr << 5) | (l2->vs << 1);
+ nskb = skb_realloc_headroom(skb, i);
+ if (!nskb) {
+ printk(KERN_WARNING "%s: no headroom(%d) copy for IFrame\n",
+ mISDNDevName4ch(&l2->ch), i);
+ skb_queue_head(&l2->i_queue, skb);
+ return;
+ }
+ if (test_bit(FLG_MOD128, &l2->flag)) {
+ p1 = (l2->vs - l2->va) % 128;
l2->vs = (l2->vs + 1) % 128;
} else {
- header[i++] = (l2->vr << 5) | (l2->vs << 1);
+ p1 = (l2->vs - l2->va) % 8;
l2->vs = (l2->vs + 1) % 8;
}
-
- nskb = skb_clone(skb, GFP_ATOMIC);
- p1 = skb_headroom(nskb);
- if (p1 >= i)
- memcpy(skb_push(nskb, i), header, i);
- else {
- printk(KERN_WARNING
- "%s: L2 pull_iqueue skb header(%d/%d) too short\n",
- mISDNDevName4ch(&l2->ch), i, p1);
- oskb = nskb;
- nskb = mI_alloc_skb(oskb->len + i, GFP_ATOMIC);
- if (!nskb) {
- dev_kfree_skb(oskb);
- printk(KERN_WARNING "%s: no skb mem in %s\n",
- mISDNDevName4ch(&l2->ch), __func__);
- return;
- }
- memcpy(skb_put(nskb, i), header, i);
- memcpy(skb_put(nskb, oskb->len), oskb->data, oskb->len);
- dev_kfree_skb(oskb);
+ p1 = (p1 + l2->sow) % l2->window;
+ if (l2->windowar[p1]) {
+ printk(KERN_WARNING "%s: l2 try overwrite ack queue entry %d\n",
+ mISDNDevName4ch(&l2->ch), p1);
+ dev_kfree_skb(l2->windowar[p1]);
}
+ l2->windowar[p1] = skb;
+ memcpy(skb_push(nskb, i), header, i);
l2down(l2, PH_DATA_REQ, l2_newid(l2), nskb);
test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
if (!test_and_set_bit(FLG_T200_RUN, &l2->flag)) {
Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
such as keyboards, mice, joysticks, trackpads or graphic tablets
handled by the input layer. If you say Y here, make sure to say Y to
- the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
- "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
- support" (CONFIG_INPUT_EVDEV) as well.
+ the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
+ "Event interface support" (CONFIG_INPUT_EVDEV) as well.
If unsure, say Y.
ret = -ENOTSUPP;
dev_err(&pdev->dev,
"IO mapped PCI devices are not supported\n");
- goto out_release;
+ goto out_iounmap;
}
pci_set_drvdata(pdev, priv);
ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
if (ret < 0)
- goto out_iounmap;
+ goto out_mcb_bus;
num_cells = ret;
dev_dbg(&pdev->dev, "Found %d cells\n", num_cells);
return 0;
+out_mcb_bus:
+ mcb_release_bus(priv->bus);
out_iounmap:
iounmap(priv->base);
out_release:
disk_super = dm_block_data(sblock);
+ disk_super->flags = cpu_to_le32(cmd->flags);
if (mutator)
update_flags(disk_super, mutator);
- disk_super->flags = cpu_to_le32(cmd->flags);
disk_super->mapping_root = cpu_to_le64(cmd->root);
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
static struct dm_cache_policy_type wb_policy_type = {
.name = "cleaner",
.version = {1, 0, 0},
- .hint_size = 0,
+ .hint_size = 4,
.owner = THIS_MODULE,
.create = wb_create
};
return -EINVAL;
}
- tmp_store = kmalloc(sizeof(*tmp_store), GFP_KERNEL);
+ tmp_store = kzalloc(sizeof(*tmp_store), GFP_KERNEL);
if (!tmp_store) {
ti->error = "Exception store allocation failed";
return -ENOMEM;
else if (persistent == 'N')
type = get_type("N");
else {
- ti->error = "Persistent flag is not P or N";
+ ti->error = "Exception store type is not P or N";
r = -EINVAL;
goto bad_type;
}
if (r)
goto bad;
- r = type->ctr(tmp_store, 0, NULL);
+ r = type->ctr(tmp_store, (strlen(argv[0]) > 1 ? &argv[0][1] : NULL));
if (r) {
ti->error = "Exception store type constructor failed";
goto bad;
const char *name;
struct module *module;
- int (*ctr) (struct dm_exception_store *store,
- unsigned argc, char **argv);
+ int (*ctr) (struct dm_exception_store *store, char *options);
/*
* Destroys this object when you've finished with it.
unsigned chunk_shift;
void *context;
+
+ bool userspace_supports_overflow;
};
/*
*/
if (min_region_size > (1 << 13)) {
/* If not a power of 2, make it the next power of 2 */
- if (min_region_size & (min_region_size - 1))
- region_size = 1 << fls(region_size);
+ region_size = roundup_pow_of_two(min_region_size);
DMINFO("Choosing default region size of %lu sectors",
region_size);
} else {
#include "dm-exception-store.h"
+#include <linux/ctype.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/vmalloc.h>
DMWARN("write header failed");
}
-static int persistent_ctr(struct dm_exception_store *store,
- unsigned argc, char **argv)
+static int persistent_ctr(struct dm_exception_store *store, char *options)
{
struct pstore *ps;
+ int r;
/* allocate the pstore */
ps = kzalloc(sizeof(*ps), GFP_KERNEL);
ps->metadata_wq = alloc_workqueue("ksnaphd", WQ_MEM_RECLAIM, 0);
if (!ps->metadata_wq) {
- kfree(ps);
DMERR("couldn't start header metadata update thread");
- return -ENOMEM;
+ r = -ENOMEM;
+ goto err_workqueue;
+ }
+
+ if (options) {
+ char overflow = toupper(options[0]);
+ if (overflow == 'O')
+ store->userspace_supports_overflow = true;
+ else {
+ DMERR("Unsupported persistent store option: %s", options);
+ r = -EINVAL;
+ goto err_options;
+ }
}
store->context = ps;
return 0;
+
+err_options:
+ destroy_workqueue(ps->metadata_wq);
+err_workqueue:
+ kfree(ps);
+
+ return r;
}
static unsigned persistent_status(struct dm_exception_store *store,
case STATUSTYPE_INFO:
break;
case STATUSTYPE_TABLE:
- DMEMIT(" P %llu", (unsigned long long)store->chunk_size);
+ DMEMIT(" %s %llu", store->userspace_supports_overflow ? "PO" : "P",
+ (unsigned long long)store->chunk_size);
}
return sz;
*metadata_sectors = 0;
}
-static int transient_ctr(struct dm_exception_store *store,
- unsigned argc, char **argv)
+static int transient_ctr(struct dm_exception_store *store, char *options)
{
struct transient_c *tc;
}
/*
- * Construct a snapshot mapping: <origin_dev> <COW-dev> <p/n> <chunk-size>
+ * Construct a snapshot mapping: <origin_dev> <COW-dev> <p|po|n> <chunk-size>
*/
static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
{
u.store_swap = snap_dest->store;
snap_dest->store = snap_src->store;
+ snap_dest->store->userspace_supports_overflow = u.store_swap->userspace_supports_overflow;
snap_src->store = u.store_swap;
snap_dest->store->snap = snap_dest;
pe = __find_pending_exception(s, pe, chunk);
if (!pe) {
- s->snapshot_overflowed = 1;
- DMERR("Snapshot overflowed: Unable to allocate exception.");
+ if (s->store->userspace_supports_overflow) {
+ s->snapshot_overflowed = 1;
+ DMERR("Snapshot overflowed: Unable to allocate exception.");
+ } else
+ __invalidate_snapshot(s, -ENOMEM);
r = -EIO;
goto out_unlock;
}
static struct target_type snapshot_target = {
.name = "snapshot",
- .version = {1, 14, 0},
+ .version = {1, 15, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
static struct target_type merge_target = {
.name = dm_snapshot_merge_target_name,
- .version = {1, 3, 0},
+ .version = {1, 4, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
metadata_low_callback,
pool);
if (r)
- goto out_free_pt;
+ goto out_flags_changed;
pt->callbacks.congested_fn = pool_is_congested;
dm_table_add_target_callbacks(ti->table, &pt->callbacks);
struct dm_rq_target_io *tio = info->tio;
struct bio *bio = info->orig;
unsigned int nr_bytes = info->orig->bi_iter.bi_size;
+ int error = clone->bi_error;
bio_put(clone);
* the remainder.
*/
return;
- else if (bio->bi_error) {
+ else if (error) {
/*
* Don't notice the error to the upper layer yet.
* The error handling decision is made by the target driver,
* when the request is completed.
*/
- tio->error = bio->bi_error;
+ tio->error = error;
return;
}
might_sleep();
- map = dm_get_live_table(md, &srcu_idx);
-
spin_lock(&_minor_lock);
idr_replace(&_minor_idr, MINOR_ALLOCED, MINOR(disk_devt(dm_disk(md))));
set_bit(DMF_FREEING, &md->flags);
* do not race with internal suspend.
*/
mutex_lock(&md->suspend_lock);
+ map = dm_get_live_table(md, &srcu_idx);
if (!dm_suspended_md(md)) {
dm_table_presuspend_targets(map);
dm_table_postsuspend_targets(map);
}
- mutex_unlock(&md->suspend_lock);
-
/* dm_put_live_table must be before msleep, otherwise deadlock is possible */
dm_put_live_table(md, srcu_idx);
+ mutex_unlock(&md->suspend_lock);
/*
* Rare, but there may be I/O requests still going to complete,
!test_bit(Bitmap_sync, &rdev->flags)))
continue;
- if (rdev->saved_raid_disk < 0)
- rdev->recovery_offset = 0;
+ rdev->recovery_offset = 0;
if (mddev->pers->
hot_add_disk(mddev, rdev) == 0) {
if (sysfs_link_rdev(mddev, rdev))
{
int s;
uint32_t max_entries = le32_to_cpu(left->header.max_entries);
- unsigned target = (nr_left + nr_center + nr_right) / 3;
- BUG_ON(target > max_entries);
+ unsigned total = nr_left + nr_center + nr_right;
+ unsigned target_right = total / 3;
+ unsigned remainder = (target_right * 3) != total;
+ unsigned target_left = target_right + remainder;
+
+ BUG_ON(target_left > max_entries);
+ BUG_ON(target_right > max_entries);
if (nr_left < nr_right) {
- s = nr_left - target;
+ s = nr_left - target_left;
if (s < 0 && nr_center < -s) {
/* not enough in central node */
} else
shift(left, center, s);
- shift(center, right, target - nr_right);
+ shift(center, right, target_right - nr_right);
} else {
- s = target - nr_right;
+ s = target_right - nr_right;
if (s > 0 && nr_center < s) {
/* not enough in central node */
shift(center, right, nr_center);
} else
shift(center, right, s);
- shift(left, center, nr_left - target);
+ shift(left, center, nr_left - target_left);
}
*key_ptr(parent, c->index) = center->keys[0];
r = new_block(s->info, &right);
if (r < 0) {
- /* FIXME: put left */
+ unlock_block(s->info, left);
return r;
}
bio_trim(wbio, sector - r1_bio->sector, sectors);
wbio->bi_iter.bi_sector += rdev->data_offset;
wbio->bi_bdev = rdev->bdev;
- if (submit_bio_wait(WRITE, wbio) == 0)
+ if (submit_bio_wait(WRITE, wbio) < 0)
/* failure! */
ok = rdev_set_badblocks(rdev, sector,
sectors, 0)
rdev_dec_pending(conf->mirrors[m].rdev,
conf->mddev);
}
- if (test_bit(R1BIO_WriteError, &r1_bio->state))
- close_write(r1_bio);
if (fail) {
spin_lock_irq(&conf->device_lock);
list_add(&r1_bio->retry_list, &conf->bio_end_io_list);
spin_unlock_irq(&conf->device_lock);
md_wakeup_thread(conf->mddev->thread);
- } else
+ } else {
+ if (test_bit(R1BIO_WriteError, &r1_bio->state))
+ close_write(r1_bio);
raid_end_bio_io(r1_bio);
+ }
}
static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
}
spin_unlock_irqrestore(&conf->device_lock, flags);
while (!list_empty(&tmp)) {
- r1_bio = list_first_entry(&conf->bio_end_io_list,
- struct r1bio, retry_list);
+ r1_bio = list_first_entry(&tmp, struct r1bio,
+ retry_list);
list_del(&r1_bio->retry_list);
+ if (mddev->degraded)
+ set_bit(R1BIO_Degraded, &r1_bio->state);
+ if (test_bit(R1BIO_WriteError, &r1_bio->state))
+ close_write(r1_bio);
raid_end_bio_io(r1_bio);
}
}
* far_copies (stored in second byte of layout)
* far_offset (stored in bit 16 of layout )
* use_far_sets (stored in bit 17 of layout )
+ * use_far_sets_bugfixed (stored in bit 18 of layout )
*
* The data to be stored is divided into chunks using chunksize. Each device
* is divided into far_copies sections. In each section, chunks are laid out
seq_printf(seq, " %d offset-copies", conf->geo.far_copies);
else
seq_printf(seq, " %d far-copies", conf->geo.far_copies);
+ if (conf->geo.far_set_size != conf->geo.raid_disks)
+ seq_printf(seq, " %d devices per set", conf->geo.far_set_size);
}
seq_printf(seq, " [%d/%d] [", conf->geo.raid_disks,
conf->geo.raid_disks - mddev->degraded);
choose_data_offset(r10_bio, rdev) +
(sector - r10_bio->sector));
wbio->bi_bdev = rdev->bdev;
- if (submit_bio_wait(WRITE, wbio) == 0)
+ if (submit_bio_wait(WRITE, wbio) < 0)
/* Failure! */
ok = rdev_set_badblocks(rdev, sector,
sectors, 0)
rdev_dec_pending(rdev, conf->mddev);
}
}
- if (test_bit(R10BIO_WriteError,
- &r10_bio->state))
- close_write(r10_bio);
if (fail) {
spin_lock_irq(&conf->device_lock);
list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
spin_unlock_irq(&conf->device_lock);
md_wakeup_thread(conf->mddev->thread);
- } else
+ } else {
+ if (test_bit(R10BIO_WriteError,
+ &r10_bio->state))
+ close_write(r10_bio);
raid_end_bio_io(r10_bio);
+ }
}
}
}
spin_unlock_irqrestore(&conf->device_lock, flags);
while (!list_empty(&tmp)) {
- r10_bio = list_first_entry(&conf->bio_end_io_list,
- struct r10bio, retry_list);
+ r10_bio = list_first_entry(&tmp, struct r10bio,
+ retry_list);
list_del(&r10_bio->retry_list);
+ if (mddev->degraded)
+ set_bit(R10BIO_Degraded, &r10_bio->state);
+
+ if (test_bit(R10BIO_WriteError,
+ &r10_bio->state))
+ close_write(r10_bio);
raid_end_bio_io(r10_bio);
}
}
disks = mddev->raid_disks + mddev->delta_disks;
break;
}
- if (layout >> 18)
+ if (layout >> 19)
return -1;
if (chunk < (PAGE_SIZE >> 9) ||
!is_power_of_2(chunk))
geo->near_copies = nc;
geo->far_copies = fc;
geo->far_offset = fo;
- geo->far_set_size = (layout & (1<<17)) ? disks / fc : disks;
+ switch (layout >> 17) {
+ case 0: /* original layout. simple but not always optimal */
+ geo->far_set_size = disks;
+ break;
+ case 1: /* "improved" layout which was buggy. Hopefully no-one is
+ * actually using this, but leave code here just in case.*/
+ geo->far_set_size = disks/fc;
+ WARN(geo->far_set_size < fc,
+ "This RAID10 layout does not provide data safety - please backup and create new array\n");
+ break;
+ case 2: /* "improved" layout fixed to match documentation */
+ geo->far_set_size = fc * nc;
+ break;
+ default: /* Not a valid layout */
+ return -1;
+ }
geo->chunk_mask = chunk - 1;
geo->chunk_shift = ffz(~chunk);
return nc*fc;
}
if (!discard_pending &&
test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ int hash;
clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
if (sh->qd_idx >= 0) {
* no updated data, so remove it from hash list and the stripe
* will be reinitialized
*/
- spin_lock_irq(&conf->device_lock);
unhash:
+ hash = sh->hash_lock_index;
+ spin_lock_irq(conf->hash_locks + hash);
remove_hash(sh);
+ spin_unlock_irq(conf->hash_locks + hash);
if (head_sh->batch_head) {
sh = list_first_entry(&sh->batch_list,
struct stripe_head, batch_list);
if (sh != head_sh)
goto unhash;
}
- spin_unlock_irq(&conf->device_lock);
sh = head_sh;
if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
const struct horus3a_config *config,
struct i2c_adapter *i2c);
#else
-static inline struct dvb_frontend *horus3a_attach(
- const struct cxd2820r_config *config,
+static inline struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
+ const struct horus3a_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
struct lnbh25_config *cfg,
struct i2c_adapter *i2c);
#else
-static inline dvb_frontend *lnbh25_attach(
+static inline struct dvb_frontend *lnbh25_attach(
struct dvb_frontend *fe,
struct lnbh25_config *cfg,
struct i2c_adapter *i2c)
static struct dvb_frontend_ops m88ds3103_ops;
+/* write single register with mask */
+static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
+ u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return regmap_bulk_write(dev->regmap, reg, &val, 1);
+}
+
/* write reg val table using reg addr auto increment */
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
const struct m88ds3103_reg_val *tab, int tab_len)
u8tmp2 = 0x00; /* 0b00 */
break;
}
- ret = regmap_update_bits(dev->regmap, 0x22, 0xc0, u8tmp1 << 6);
+ ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x24, 0xc0, u8tmp2 << 6);
+ ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
if (ret)
goto err;
}
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0x9d, 0x08, 0x08);
+ ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf1, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x80, 0x80);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
if (ret)
goto err;
}
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
- ret = regmap_update_bits(dev->regmap, 0x29, 0x20, u8tmp1);
+ ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
if (ret)
goto err;
u8tmp1 = 0;
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x4d, 0x02, dev->cfg->spec_inv << 1);
+ ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x10, dev->cfg->agc_inv << 4);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
if (ret)
goto err;
dev->warm = false;
/* wake up device from sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
if (ret)
goto err;
utmp = 0x29;
else
utmp = 0x27;
- ret = regmap_update_bits(dev->regmap, utmp, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
if (ret)
goto err;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err;
}
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
utmp = 1 << 2;
- ret = regmap_update_bits(dev->regmap, 0xa1, reg_a1_mask, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
if (ret)
goto err;
voltage_dis ^= dev->cfg->lnb_en_pol;
utmp = voltage_dis << 1 | voltage_sel << 0;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0x03, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
goto err_kfree;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err_kfree;
/* firmware is in the new format */
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2168_ARGLEN) {
+ ret = -EINVAL;
+ break;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
u16 reg;
unsigned long flags;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return IRQ_NONE;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
if (!(reg & NETUP_SPI_CTRL_IRQ)) {
unsigned long flags;
struct netup_spi *spi = ndev->spi;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
Elf32_Ehdr *ehdr;
Elf32_Phdr *phdr;
u8 __iomem *dst;
- int err, i;
+ int err = 0, i;
if (!fw || !context)
return -EINVAL;
phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff);
/* go through the available ELF segments */
- for (i = 0; i < ehdr->e_phnum && !err; i++, phdr++) {
+ for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
/* Only consider LOAD segments */
if (phdr->p_type != PT_LOAD)
static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei)
{
- int ret;
int err;
dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA);
if (err) {
dev_err(fei->dev, "request_firmware_nowait err: %d.\n", err);
complete_all(&fei->fw_ack);
- return ret;
+ return err;
}
return 0;
goto clkerr;
if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
- IRQF_NO_SUSPEND, pdev->name, priv) < 0) {
+ 0, pdev->name, priv) < 0) {
dev_err(dev, "IRQ %d register failed\n", priv->irq);
ret = -EINVAL;
goto regerr;
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2157_ARGLEN) {
+ dev_err(&client->dev, "Bad firmware length\n");
+ goto err_release_firmware;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
unsigned int pipe;
u8 requesttype;
+ mutex_lock(&d->usb_mutex);
+
+ if (req->size > sizeof(dev->buf)) {
+ dev_err(&d->intf->dev, "too large message %u\n", req->size);
+ ret = -EINVAL;
+ goto err_mutex_unlock;
+ }
+
if (req->index & CMD_WR_FLAG) {
/* write */
memcpy(dev->buf, req->data, req->size);
dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
req->index, dev->buf, req->size);
if (ret < 0)
- goto err;
+ goto err_mutex_unlock;
/* read request, copy returned data to return buf */
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
memcpy(req->data, dev->buf, req->size);
+ mutex_unlock(&d->usb_mutex);
+
return 0;
-err:
+err_mutex_unlock:
+ mutex_unlock(&d->usb_mutex);
dev_dbg(&d->intf->dev, "failed=%d\n", ret);
return ret;
}
struct rtl28xxu_dev {
- u8 buf[28];
+ u8 buf[128];
u8 chip_id;
u8 tuner;
char *tuner_name;
# Used by LED subsystem flash drivers
config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
---help---
Say Y here to enable V4L2 flash API support for LED flash
memory drives like NOR, NAND, OneNAND, SRAM.
config OMAP_GPMC_DEBUG
- bool
+ bool "Enable GPMC debug output and skip reset of GPMC during init"
depends on OMAP_GPMC
help
Enables verbose debugging mostly to decode the bootloader provided
- timings. Enable this during development to configure devices
- connected to the GPMC bus.
+ timings. To preserve the bootloader provided timings, the reset
+ of GPMC is skipped during init. Enable this during development to
+ configure devices connected to the GPMC bus.
+
+ NOTE: In addition to matching the register setup with the bootloader
+ you also need to match the GPMC FCLK frequency used by the
+ bootloader or else the GPMC timings won't be identical with the
+ bootloader timings.
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
int div;
u32 l;
- gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
if (ret < 0)
goto err;
+ gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
goto err;
if (of_property_read_bool(np, "mpmc,extended-wait"))
cfg |= MPMC_STATIC_CFG_EW;
- if (of_property_read_bool(np, "mpmc,buffer-enable"))
+ if (amba_part(adev) == 0x172 &&
+ of_property_read_bool(np, "mpmc,buffer-enable"))
cfg |= MPMC_STATIC_CFG_B;
if (of_property_read_bool(np, "mpmc,write-protect"))
}
static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"};
+static const char * const pl175_revisions[] = {"r1"};
+static const char * const pl176_revisions[] = {"r0"};
static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
{
if (amba_part(adev) == 0x172) {
if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions))
rev = pl172_revisions[amba_rev(adev)];
+ } else if (amba_part(adev) == 0x175) {
+ if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions))
+ rev = pl175_revisions[amba_rev(adev)];
+ } else if (amba_part(adev) == 0x176) {
+ if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions))
+ rev = pl176_revisions[amba_rev(adev)];
}
dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev);
}
static const struct amba_id pl172_ids[] = {
+ /* PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */
{
- .id = 0x07341172,
- .mask = 0xffffffff,
+ .id = 0x07041172,
+ .mask = 0x3f0fffff,
+ },
+ /* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */
+ {
+ .id = 0x07041175,
+ .mask = 0x3f0fffff,
+ },
+ /* PrimeCell MPMC PL176 */
+ {
+ .id = 0x89041176,
+ .mask = 0xff0fffff,
},
{ 0, 0 },
};
.thaw = intel_lpss_resume, \
.poweroff = intel_lpss_suspend, \
.restore = intel_lpss_resume,
+#else
+#define INTEL_LPSS_SLEEP_PM_OPS
#endif
#define INTEL_LPSS_RUNTIME_PM_OPS \
if (!max77843->i2c_chg) {
dev_err(&max77843->i2c->dev,
"Cannot allocate I2C device for Charger\n");
- return PTR_ERR(max77843->i2c_chg);
+ return -ENODEV;
}
i2c_set_clientdata(max77843->i2c_chg, max77843);
if (IS_ERR(clk))
return PTR_ERR(clk);
+ tc->slow_clk = devm_clk_get(&pdev->dev, "slow_clk");
+ if (IS_ERR(tc->slow_clk))
+ return PTR_ERR(tc->slow_clk);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tc->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(tc->regs))
void cxl_free_afu_irqs(struct cxl_context *ctx)
{
+ afu_irq_name_free(ctx);
cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter);
}
EXPORT_SYMBOL_GPL(cxl_free_afu_irqs);
if (ctx->kernelapi)
kfree(ctx->mapping);
+ if (ctx->irq_bitmap)
+ kfree(ctx->irq_bitmap);
+
kfree(ctx);
}
void cxl_release_serr_irq(struct cxl_afu *afu);
int afu_register_irqs(struct cxl_context *ctx, u32 count);
void afu_release_irqs(struct cxl_context *ctx, void *cookie);
+void afu_irq_name_free(struct cxl_context *ctx);
irqreturn_t cxl_slice_irq_err(int irq, void *data);
int cxl_debugfs_init(void);
__func__, ctx->pe);
cxl_context_detach(ctx);
- mutex_lock(&ctx->mapping_lock);
- ctx->mapping = NULL;
- mutex_unlock(&ctx->mapping_lock);
+
+ /*
+ * Delete the context's mapping pointer, unless it's created by the
+ * kernel API, in which case leave it so it can be freed by reclaim_ctx()
+ */
+ if (!ctx->kernelapi) {
+ mutex_lock(&ctx->mapping_lock);
+ ctx->mapping = NULL;
+ mutex_unlock(&ctx->mapping_lock);
+ }
put_device(&ctx->afu->dev);
kfree(afu->psl_irq_name);
}
-static void afu_irq_name_free(struct cxl_context *ctx)
+void afu_irq_name_free(struct cxl_context *ctx)
{
struct cxl_irq_name *irq_name, *tmp;
afu_irq_name_free(ctx);
cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter);
- kfree(ctx->irq_bitmap);
- ctx->irq_bitmap = NULL;
ctx->irq_count = 0;
}
dev_info(&afu->dev, "Activating AFU directed mode\n");
+ afu->num_procs = afu->max_procs_virtualised;
if (afu->spa == NULL) {
if (cxl_alloc_spa(afu))
return -ENOMEM;
cxl_p1n_write(afu, CXL_PSL_ID_An, CXL_PSL_ID_An_F | CXL_PSL_ID_An_L);
afu->current_mode = CXL_MODE_DIRECTED;
- afu->num_procs = afu->max_procs_virtualised;
if ((rc = cxl_chardev_m_afu_add(afu)))
return rc;
return 0;
}
+/*
+ * Workaround a PCIe Host Bridge defect on some cards, that can cause
+ * malformed Transaction Layer Packet (TLP) errors to be erroneously
+ * reported. Mask this error in the Uncorrectable Error Mask Register.
+ *
+ * The upper nibble of the PSL revision is used to distinguish between
+ * different cards. The affected ones have it set to 0.
+ */
+static void cxl_fixup_malformed_tlp(struct cxl *adapter, struct pci_dev *dev)
+{
+ int aer;
+ u32 data;
+
+ if (adapter->psl_rev & 0xf000)
+ return;
+ if (!(aer = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)))
+ return;
+ pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, &data);
+ if (data & PCI_ERR_UNC_MALF_TLP)
+ if (data & PCI_ERR_UNC_INTN)
+ return;
+ data |= PCI_ERR_UNC_MALF_TLP;
+ data |= PCI_ERR_UNC_INTN;
+ pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, data);
+}
+
static int cxl_vsec_looks_ok(struct cxl *adapter, struct pci_dev *dev)
{
if (adapter->vsec_status & CXL_STATUS_SECOND_PORT)
if ((rc = cxl_vsec_looks_ok(adapter, dev)))
return rc;
+ cxl_fixup_malformed_tlp(adapter, dev);
+
if ((rc = setup_cxl_bars(dev)))
return rc;
return;
phb = afu->phb;
+ afu->phb = NULL;
pci_remove_root_bus(phb->bus);
+ pcibios_free_controller(phb);
}
struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev)
* after the host receives the enum_resp
* message clients may be added or removed
*/
- if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS &&
+ if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS ||
dev->hbm_state >= MEI_HBM_STOPPED) {
dev_err(dev->dev, "hbm: add client: state mismatch, [%d, %d]\n",
dev->dev_state, dev->hbm_state);
/*
* eMMC hardware reset.
*/
-static int mmc_test_hw_reset(struct mmc_test_card *test)
+static int mmc_test_reset(struct mmc_test_card *test)
{
struct mmc_card *card = test->card;
struct mmc_host *host = card->host;
int err;
- if (!mmc_card_mmc(card) || !mmc_can_reset(card))
- return RESULT_UNSUP_CARD;
-
err = mmc_hw_reset(host);
if (!err)
return RESULT_OK;
},
{
- .name = "eMMC hardware reset",
- .run = mmc_test_hw_reset,
+ .name = "Reset test",
+ .run = mmc_test_reset,
},
};
static int mmc_reset(struct mmc_host *host)
{
struct mmc_card *card = host->card;
- u32 status;
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
return -EOPNOTSUPP;
host->ops->hw_reset(host);
- /* If the reset has happened, then a status command will fail */
- if (!mmc_send_status(card, &status)) {
- mmc_host_clk_release(host);
- return -ENOSYS;
- }
-
/* Set initial state and call mmc_set_ios */
mmc_set_initial_state(host);
mmc_host_clk_release(host);
struct clk *fclk;
struct clk *dbclk;
struct regulator *pbias;
+ bool pbias_enabled;
void __iomem *base;
int vqmmc_enabled;
resource_size_t mapbase;
return ret;
}
- if (!regulator_is_enabled(host->pbias)) {
+ if (host->pbias_enabled == 0) {
ret = regulator_enable(host->pbias);
if (ret) {
dev_err(host->dev, "pbias reg enable fail\n");
return ret;
}
+ host->pbias_enabled = 1;
}
} else {
- if (regulator_is_enabled(host->pbias)) {
+ if (host->pbias_enabled == 1) {
ret = regulator_disable(host->pbias);
if (ret) {
dev_err(host->dev, "pbias reg disable fail\n");
return ret;
}
+ host->pbias_enabled = 0;
}
}
mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc");
if (IS_ERR(mmc->supply.vmmc)) {
ret = PTR_ERR(mmc->supply.vmmc);
- if (ret != -ENODEV)
+ if ((ret != -ENODEV) && host->dev->of_node)
return ret;
dev_dbg(host->dev, "unable to get vmmc regulator %ld\n",
PTR_ERR(mmc->supply.vmmc));
mmc->supply.vqmmc = devm_regulator_get_optional(host->dev, "vmmc_aux");
if (IS_ERR(mmc->supply.vqmmc)) {
ret = PTR_ERR(mmc->supply.vqmmc);
- if (ret != -ENODEV)
+ if ((ret != -ENODEV) && host->dev->of_node)
return ret;
dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n",
PTR_ERR(mmc->supply.vqmmc));
host->pbias = devm_regulator_get_optional(host->dev, "pbias");
if (IS_ERR(host->pbias)) {
ret = PTR_ERR(host->pbias);
- if (ret != -ENODEV)
+ if ((ret != -ENODEV) && host->dev->of_node)
return ret;
dev_dbg(host->dev, "unable to get pbias regulator %ld\n",
PTR_ERR(host->pbias));
host->base = base + pdata->reg_offset;
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
+ host->pbias_enabled = 0;
host->vqmmc_enabled = 0;
ret = omap_hsmmc_gpio_init(mmc, host, pdata);
static const struct sdhci_pltfm_data soc_data_sama5d2 = {
.ops = &sdhci_at91_sama5d2_ops,
+ .quirks2 = SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST,
};
static const struct of_device_id sdhci_at91_dt_match[] = {
struct sdhci_pxa *pxa = pltfm_host->priv;
struct resource *res;
+ host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"conf-sdio3");
uhs == MMC_TIMING_UHS_DDR50) {
reg_val &= ~SDIO3_CONF_CLK_INV;
reg_val |= SDIO3_CONF_SD_FB_CLK;
+ } else if (uhs == MMC_TIMING_MMC_HS) {
+ reg_val &= ~SDIO3_CONF_CLK_INV;
+ reg_val &= ~SDIO3_CONF_SD_FB_CLK;
} else {
reg_val |= SDIO3_CONF_CLK_INV;
reg_val &= ~SDIO3_CONF_SD_FB_CLK;
if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
ret = armada_38x_quirks(pdev, host);
if (ret < 0)
- goto err_clk_get;
+ goto err_mbus_win;
ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
if (ret < 0)
goto err_mbus_win;
host->mmc->actual_clock = 0;
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+ if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
+ mdelay(1);
if (clock == 0)
return;
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
+/*
+ * When internal clock is disabled, a delay is needed before modifying the
+ * SD clock frequency or enabling back the internal clock.
+ */
+#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST (1<<16)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
{PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,},
#ifdef CONFIG_CAN_PEAK_PCIEC
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
if (ndev->irq == -ENXIO) {
netdev_err(ndev, "No irq resource\n");
ret = ndev->irq;
- goto out;
+ goto out_iounmap;
}
db->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(db->clk)) {
ret = PTR_ERR(db->clk);
- goto out;
+ goto out_iounmap;
}
- clk_prepare_enable(db->clk);
+ ret = clk_prepare_enable(db->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
+ goto out_iounmap;
+ }
ret = sunxi_sram_claim(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
- goto out;
+ goto out_clk_disable_unprepare;
}
db->phy_node = of_parse_phandle(np, "phy", 0);
out_release_sram:
sunxi_sram_release(&pdev->dev);
+out_clk_disable_unprepare:
+ clk_disable_unprepare(db->clk);
+out_iounmap:
+ iounmap(db->membase);
out:
dev_err(db->dev, "not found (%d).\n", ret);
static int emac_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
+ struct emac_board_info *db = netdev_priv(ndev);
unregister_netdev(ndev);
+ sunxi_sram_release(&pdev->dev);
+ clk_disable_unprepare(db->clk);
+ iounmap(db->membase);
free_netdev(ndev);
dev_dbg(&pdev->dev, "released and freed device\n");
pdata->debugfs_xpcs_reg = 0;
buf = kasprintf(GFP_KERNEL, "amd-xgbe-%s", pdata->netdev->name);
+ if (!buf)
+ return;
+
pdata->xgbe_debugfs = debugfs_create_dir(buf, NULL);
if (!pdata->xgbe_debugfs) {
netdev_err(pdata->netdev, "debugfs_create_dir failed\n");
+ kfree(buf);
return;
}
packet->rdesc_count, 1);
/* Make sure ownership is written to the descriptor */
- dma_wmb();
+ smp_wmb();
ring->cur = cur_index + 1;
if (!packet->skb->xmit_more ||
struct netdev_queue *txq;
int processed = 0;
unsigned int tx_packets = 0, tx_bytes = 0;
+ unsigned int cur;
DBGPR("-->xgbe_tx_poll\n");
if (!ring)
return 0;
+ cur = ring->cur;
+
+ /* Be sure we get ring->cur before accessing descriptor data */
+ smp_rmb();
+
txq = netdev_get_tx_queue(netdev, channel->queue_index);
while ((processed < XGBE_TX_DESC_MAX_PROC) &&
- (ring->dirty != ring->cur)) {
+ (ring->dirty != cur)) {
rdata = XGBE_GET_DESC_DATA(ring, ring->dirty);
rdesc = rdata->rdesc;
for (i = 0; i < priv->num_ports; i++) {
struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
+ int val, j, up, advertise, lpa, speed, duplex, media;
int external_phy = bcm_enet_port_is_rgmii(i);
u8 override;
lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
MII_LPA);
- lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
- MII_STAT1000);
-
/* figure out media and duplex from advertise and LPA values */
media = mii_nway_result(lpa & advertise);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
- if (lpa2 & LPA_1000FULL)
- duplex = 1;
-
- if (lpa2 & (LPA_1000FULL | LPA_1000HALF))
- speed = 1000;
- else {
- if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
- speed = 100;
- else
- speed = 10;
+
+ if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+ speed = 100;
+ else
+ speed = 10;
+
+ if (val & BMSR_ESTATEN) {
+ advertise = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_CTRL1000);
+
+ lpa = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_STAT1000);
+
+ if (advertise & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)
+ && lpa & (LPA_1000FULL | LPA_1000HALF)) {
+ speed = 1000;
+ duplex = (lpa & LPA_1000FULL);
+ }
}
dev_info(&priv->pdev->dev,
udp_rss_requested = 0;
else
return -EINVAL;
+
+ if (CHIP_IS_E1x(bp) && udp_rss_requested) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "57710, 57711 boards don't support RSS according to UDP 4-tuple\n");
+ return -EINVAL;
+ }
+
if ((info->flow_type == UDP_V4_FLOW) &&
(bp->rss_conf_obj.udp_rss_v4 != udp_rss_requested)) {
bp->rss_conf_obj.udp_rss_v4 = udp_rss_requested;
}
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- if (mode == GENET_POWER_PASSIVE)
+ if (mode == GENET_POWER_PASSIVE) {
bcmgenet_phy_power_set(priv->dev, true);
+ bcmgenet_mii_reset(priv->dev);
+ }
}
/* ioctl handle special commands that are not present in ethtool. */
bcmgenet_intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
}
+static void bcmgenet_link_intr_enable(struct bcmgenet_priv *priv)
+{
+ u32 int0_enable = 0;
+
+ /* Monitor cable plug/unplugged event for internal PHY, external PHY
+ * and MoCA PHY
+ */
+ if (priv->internal_phy) {
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ } else if (priv->ext_phy) {
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
+ if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ }
+ bcmgenet_intrl2_0_writel(priv, int0_enable, INTRL2_CPU_MASK_CLEAR);
+}
+
static int init_umac(struct bcmgenet_priv *priv)
{
struct device *kdev = &priv->pdev->dev;
/* Enable Tx default queue 16 interrupts */
int0_enable |= UMAC_IRQ_TXDMA_DONE;
- /* Monitor cable plug/unplugged event for internal PHY */
- if (priv->internal_phy) {
- int0_enable |= UMAC_IRQ_LINK_EVENT;
- } else if (priv->ext_phy) {
- int0_enable |= UMAC_IRQ_LINK_EVENT;
- } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
- if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
- int0_enable |= UMAC_IRQ_LINK_EVENT;
-
+ /* Configure backpressure vectors for MoCA */
+ if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
reg = bcmgenet_bp_mc_get(priv);
reg |= BIT(priv->hw_params->bp_in_en_shift);
netif_tx_start_all_queues(dev);
+ /* Monitor link interrupts now */
+ bcmgenet_link_intr_enable(priv);
+
phy_start(priv->phydev);
}
int bcmgenet_mii_config(struct net_device *dev);
int bcmgenet_mii_probe(struct net_device *dev);
void bcmgenet_mii_exit(struct net_device *dev);
+void bcmgenet_mii_reset(struct net_device *dev);
void bcmgenet_phy_power_set(struct net_device *dev, bool enable);
void bcmgenet_mii_setup(struct net_device *dev);
phy_print_status(phydev);
}
+
static int bcmgenet_fixed_phy_link_update(struct net_device *dev,
struct fixed_phy_status *status)
{
return 0;
}
+/* Perform a voluntary PHY software reset, since the EPHY is very finicky about
+ * not doing it and will start corrupting packets
+ */
+void bcmgenet_mii_reset(struct net_device *dev)
+{
+ struct bcmgenet_priv *priv = netdev_priv(dev);
+
+ if (GENET_IS_V4(priv))
+ return;
+
+ if (priv->phydev) {
+ phy_init_hw(priv->phydev);
+ phy_start_aneg(priv->phydev);
+ }
+}
+
void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
reg |= EXT_PWR_DN_EN_LD;
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+ bcmgenet_mii_reset(dev);
}
static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
#
config NET_VENDOR_CAVIUM
- tristate "Cavium ethernet drivers"
+ bool "Cavium ethernet drivers"
depends on PCI
default y
---help---
struct nicpf {
struct pci_dev *pdev;
- u8 rev_id;
u8 node;
unsigned int flags;
u8 num_vf_en; /* No of VF enabled */
u8 duplex[MAX_LMAC];
u32 speed[MAX_LMAC];
u16 cpi_base[MAX_NUM_VFS_SUPPORTED];
+ u16 rssi_base[MAX_NUM_VFS_SUPPORTED];
u16 rss_ind_tbl_size;
bool mbx_lock[MAX_NUM_VFS_SUPPORTED];
bool irq_allocated[NIC_PF_MSIX_VECTORS];
};
+static inline bool pass1_silicon(struct nicpf *nic)
+{
+ return nic->pdev->revision < 8;
+}
+
/* Supported devices */
static const struct pci_device_id nic_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_NIC_PF) },
* when PF writes to MBOX(1), in next revisions when
* PF writes to MBOX(0)
*/
- if (nic->rev_id == 0) {
+ if (pass1_silicon(nic)) {
/* see the comment for nic_reg_write()/nic_reg_read()
* functions above
*/
{
int i;
- /* Reset NIC, in case the driver is repeatedly inserted and removed */
- nic_reg_write(nic, NIC_PF_SOFT_RESET, 1);
-
/* Enable NIC HW block */
nic_reg_write(nic, NIC_PF_CFG, 0x3);
padd = cpi % 8; /* 3 bits CS out of 6bits DSCP */
/* Leave RSS_SIZE as '0' to disable RSS */
- nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
- (vnic << 24) | (padd << 16) | (rssi_base + rssi));
+ if (pass1_silicon(nic)) {
+ nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
+ (vnic << 24) | (padd << 16) |
+ (rssi_base + rssi));
+ } else {
+ /* Set MPI_ALG to '0' to disable MCAM parsing */
+ nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
+ (padd << 16));
+ /* MPI index is same as CPI if MPI_ALG is not enabled */
+ nic_reg_write(nic, NIC_PF_MPI_0_2047_CFG | (cpi << 3),
+ (vnic << 24) | (rssi_base + rssi));
+ }
if ((rssi + 1) >= cfg->rq_cnt)
continue;
rssi = ((cpi - cpi_base) & 0x38) >> 3;
}
nic->cpi_base[cfg->vf_id] = cpi_base;
+ nic->rssi_base[cfg->vf_id] = rssi_base;
}
/* Responsds to VF with its RSS indirection table size */
{
u8 qset, idx = 0;
u64 cpi_cfg, cpi_base, rssi_base, rssi;
+ u64 idx_addr;
- cpi_base = nic->cpi_base[cfg->vf_id];
- cpi_cfg = nic_reg_read(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3));
- rssi_base = (cpi_cfg & 0x0FFF) + cfg->tbl_offset;
+ rssi_base = nic->rssi_base[cfg->vf_id] + cfg->tbl_offset;
rssi = rssi_base;
qset = cfg->vf_id;
idx++;
}
+ cpi_base = nic->cpi_base[cfg->vf_id];
+ if (pass1_silicon(nic))
+ idx_addr = NIC_PF_CPI_0_2047_CFG;
+ else
+ idx_addr = NIC_PF_MPI_0_2047_CFG;
+ cpi_cfg = nic_reg_read(nic, idx_addr | (cpi_base << 3));
cpi_cfg &= ~(0xFULL << 20);
cpi_cfg |= (cfg->hash_bits << 20);
- nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3), cpi_cfg);
+ nic_reg_write(nic, idx_addr | (cpi_base << 3), cpi_cfg);
}
/* 4 level transmit side scheduler configutation
goto err_release_regions;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &nic->rev_id);
-
nic->node = nic_get_node_id(pdev);
nic_set_lmac_vf_mapping(nic);
#define NIC_PF_ECC3_DBE_INT_W1S (0x2708)
#define NIC_PF_ECC3_DBE_ENA_W1C (0x2710)
#define NIC_PF_ECC3_DBE_ENA_W1S (0x2718)
+#define NIC_PF_MCAM_0_191_ENA (0x100000)
+#define NIC_PF_MCAM_0_191_M_0_5_DATA (0x110000)
+#define NIC_PF_MCAM_CTRL (0x120000)
#define NIC_PF_CPI_0_2047_CFG (0x200000)
+#define NIC_PF_MPI_0_2047_CFG (0x210000)
#define NIC_PF_RSSI_0_4097_RQ (0x220000)
#define NIC_PF_LMAC_0_7_CFG (0x240000)
#define NIC_PF_LMAC_0_7_SW_XOFF (0x242000)
static const struct pci_device_id nicvf_id_table[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
PCI_DEVICE_ID_THUNDER_NIC_VF,
- PCI_VENDOR_ID_CAVIUM, 0xA11E) },
+ PCI_VENDOR_ID_CAVIUM, 0xA134) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
PCI_DEVICE_ID_THUNDER_PASS1_NIC_VF,
PCI_VENDOR_ID_CAVIUM, 0xA11E) },
SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev);
bgx->lmac[lmac].lmacid = lmac;
lmac++;
- if (lmac == MAX_LMAC_PER_BGX)
+ if (lmac == MAX_LMAC_PER_BGX) {
+ of_node_put(np_child);
break;
+ }
}
return 0;
}
int be_get_temp_freq;
struct be_hwmon hwmon_info;
u8 pf_number;
+ u8 pci_func_num;
struct rss_info rss_info;
/* Filters for packets that need to be sent to BMC */
u32 bmc_filt_mask;
return status;
dest_wrb = be_cmd_copy(adapter, wrb);
- if (!dest_wrb)
- return -EBUSY;
+ if (!dest_wrb) {
+ status = -EBUSY;
+ goto unlock;
+ }
if (use_mcc(adapter))
status = be_mcc_notify_wait(adapter);
if (!status)
memcpy(wrb, dest_wrb, sizeof(*wrb));
+unlock:
be_cmd_unlock(adapter);
return status;
}
be_if_cap_flags(adapter));
}
flags &= be_if_cap_flags(adapter);
+ if (!flags)
+ return -ENOTSUPP;
return __be_cmd_rx_filter(adapter, flags, value);
}
if (!status) {
attribs = attribs_cmd.va + sizeof(struct be_cmd_resp_hdr);
adapter->hba_port_num = attribs->hba_attribs.phy_port;
+ adapter->pci_func_num = attribs->pci_func_num;
serial_num = attribs->hba_attribs.controller_serial_number;
for (i = 0; i < CNTL_SERIAL_NUM_WORDS; i++)
adapter->serial_num[i] = le32_to_cpu(serial_num[i]) &
status = -EINVAL;
goto err;
}
-
adapter->pf_number = desc->pf_num;
be_copy_nic_desc(res, desc);
}
return status;
}
-/* Will use MBOX only if MCCQ has not been created */
+/* Will use MBOX only if MCCQ has not been created
+ * non-zero domain => a PF is querying this on behalf of a VF
+ * zero domain => a PF or a VF is querying this for itself
+ */
int be_cmd_get_profile_config(struct be_adapter *adapter,
struct be_resources *res, u8 query, u8 domain)
{
OPCODE_COMMON_GET_PROFILE_CONFIG,
cmd.size, &wrb, &cmd);
- req->hdr.domain = domain;
if (!lancer_chip(adapter))
req->hdr.version = 1;
req->type = ACTIVE_PROFILE_TYPE;
+ /* When a function is querying profile information relating to
+ * itself hdr.pf_number must be set to it's pci_func_num + 1
+ */
+ req->hdr.domain = domain;
+ if (domain == 0)
+ req->hdr.pf_num = adapter->pci_func_num + 1;
/* When QUERY_MODIFIABLE_FIELDS_TYPE bit is set, cmd returns the
* descriptors with all bits set to "1" for the fields which can be
vf_if_cap_flags &= ~(BE_IF_FLAGS_RSS |
BE_IF_FLAGS_DEFQ_RSS);
}
-
- nic_vft->cap_flags = cpu_to_le32(vf_if_cap_flags);
} else {
num_vf_qs = 1;
}
+ if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) {
+ nic_vft->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT);
+ vf_if_cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS;
+ }
+
+ nic_vft->cap_flags = cpu_to_le32(vf_if_cap_flags);
nic_vft->rq_count = cpu_to_le16(num_vf_qs);
nic_vft->txq_count = cpu_to_le16(num_vf_qs);
nic_vft->rssq_count = cpu_to_le16(num_vf_qs);
u32 timeout; /* dword 1 */
u32 request_length; /* dword 2 */
u8 version; /* dword 3 */
- u8 rsvd[3]; /* dword 3 */
+ u8 rsvd1; /* dword 3 */
+ u8 pf_num; /* dword 3 */
+ u8 rsvd2; /* dword 3 */
};
#define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */
struct mgmt_controller_attrib {
struct mgmt_hba_attribs hba_attribs;
- u32 rsvd0[10];
+ u32 rsvd0[2];
+ u16 rsvd1;
+ u8 pci_func_num;
+ u8 rsvd2;
+ u32 rsvd3[7];
} __packed;
struct be_cmd_req_cntl_attribs {
struct sk_buff *skb,
struct be_wrb_params *wrb_params)
{
- /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or
- * less may cause a transmit stall on that port. So the work-around is
- * to pad short packets (<= 32 bytes) to a 36-byte length.
+ /* Lancer, SH and BE3 in SRIOV mode have a bug wherein
+ * packets that are 32b or less may cause a transmit stall
+ * on that port. The workaround is to pad such packets
+ * (len <= 32 bytes) to a minimum length of 36b.
*/
- if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) {
+ if (skb->len <= 32) {
if (skb_put_padto(skb, 36))
return NULL;
}
int status, level;
u16 profile_id;
- status = be_cmd_get_cntl_attributes(adapter);
- if (status)
- return status;
-
status = be_cmd_query_fw_cfg(adapter);
if (status)
return status;
if (!lancer_chip(adapter))
be_cmd_req_native_mode(adapter);
+ /* Need to invoke this cmd first to get the PCI Function Number */
+ status = be_cmd_get_cntl_attributes(adapter);
+ if (status)
+ return status;
+
if (!BE2_chip(adapter) && be_physfn(adapter))
be_alloc_sriov_res(adapter);
return false;
}
- return (fhdr->asic_type_rev >= adapter->asic_rev);
+ /* In BE3 FW images the "asic_type_rev" field doesn't track the
+ * asic_rev of the chips it is compatible with.
+ * When asic_type_rev is 0 the image is compatible only with
+ * pre-BE3-R chips (asic_rev < 0x10)
+ */
+ if (BEx_chip(adapter) && fhdr->asic_type_rev == 0)
+ return adapter->asic_rev < 0x10;
+ else
+ return (fhdr->asic_type_rev >= adapter->asic_rev);
}
static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
return;
}
msleep(msec);
- gpio_set_value(phy_reset, 1);
+ gpio_set_value_cansleep(phy_reset, 1);
}
#else /* CONFIG_OF */
static void fec_reset_phy(struct platform_device *pdev)
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
/*
+ * Return the TBIPA address, starting from the address
+ * of the mapped GFAR MDIO registers (struct gfar)
* This is mildly evil, but so is our hardware for doing this.
* Also, we have to cast back to struct gfar because of
* definition weirdness done in gianfar.h.
*/
-static uint32_t __iomem *get_gfar_tbipa(void __iomem *p)
+static uint32_t __iomem *get_gfar_tbipa_from_mdio(void __iomem *p)
{
struct gfar __iomem *enet_regs = p;
return &enet_regs->tbipa;
}
+/*
+ * Return the TBIPA address, starting from the address
+ * of the mapped GFAR MII registers (gfar_mii_regs[] within struct gfar)
+ */
+static uint32_t __iomem *get_gfar_tbipa_from_mii(void __iomem *p)
+{
+ return get_gfar_tbipa_from_mdio(container_of(p, struct gfar, gfar_mii_regs));
+}
+
/*
* Return the TBIPAR address for an eTSEC2 node
*/
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
/*
- * Return the TBIPAR address for a QE MDIO node
+ * Return the TBIPAR address for a QE MDIO node, starting from the address
+ * of the mapped MII registers (struct fsl_pq_mii)
*/
static uint32_t __iomem *get_ucc_tbipa(void __iomem *p)
{
- struct fsl_pq_mdio __iomem *mdio = p;
+ struct fsl_pq_mdio __iomem *mdio = container_of(p, struct fsl_pq_mdio, mii);
return &mdio->utbipar;
}
.compatible = "fsl,gianfar-tbi",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
.compatible = "fsl,gianfar-mdio",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
.compatible = "gianfar",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = offsetof(struct fsl_pq_mdio, mii),
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mdio,
},
},
{
tbipa = data->get_tbipa(priv->map);
+ /*
+ * Add consistency check to make sure TBI is contained
+ * within the mapped range (not because we would get a
+ * segfault, rather to catch bugs in computing TBI
+ * address). Print error message but continue anyway.
+ */
+ if ((void *)tbipa > priv->map + resource_size(&res) - 4)
+ dev_err(&pdev->dev, "invalid register map (should be at least 0x%04x to contain TBI address)\n",
+ ((void *)tbipa - priv->map) + 4);
+
iowrite32be(be32_to_cpup(prop), tbipa);
}
}
if (priv->ndev->features & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX))
priv->uses_rxfcb = 1;
- if (priv->hwts_rx_en)
+ if (priv->hwts_rx_en || priv->rx_filer_enable)
priv->uses_rxfcb = 1;
}
u32 rctrl = 0;
if (priv->rx_filer_enable) {
- rctrl |= RCTRL_FILREN;
+ rctrl |= RCTRL_FILREN | RCTRL_PRSDEP_INIT;
/* Program the RIR0 reg with the required distribution */
if (priv->poll_mode == GFAR_SQ_POLLING)
gfar_write(®s->rir0, DEFAULT_2RXQ_RIR0);
netif_dbg(priv, tx_err, dev, "Transmit Error\n");
}
if (events & IEVENT_BSY) {
- dev->stats.rx_errors++;
+ dev->stats.rx_over_errors++;
atomic64_inc(&priv->extra_stats.rx_bsy);
- gfar_receive(irq, grp_id);
-
netif_dbg(priv, rx_err, dev, "busy error (rstat: %x)\n",
gfar_read(®s->rstat));
}
u32 fcr = 0x0, fpr = FPR_FILER_MASK;
if (ethflow & RXH_L2DA) {
- fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
+ fcr = RQFCR_PID_DAH | RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
- fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
+ fcr = RQFCR_PID_DAL | RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
- hw->aq.asq.count = hw->aq.num_asq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_asq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.asq.count = hw->aq.num_asq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
- hw->aq.arq.count = hw->aq.num_arq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_arq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.arq.count = hw->aq.num_arq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
data[i++] = (i40e_gstrings_veb_stats[j].sizeof_stat ==
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
+ for (j = 0; j < I40E_MAX_TRAFFIC_CLASS; j++) {
+ data[i++] = veb->tc_stats.tc_tx_packets[j];
+ data[i++] = veb->tc_stats.tc_tx_bytes[j];
+ data[i++] = veb->tc_stats.tc_rx_packets[j];
+ data[i++] = veb->tc_stats.tc_rx_bytes[j];
+ }
}
for (j = 0; j < I40E_GLOBAL_STATS_LEN; j++) {
p = (char *)pf + i40e_gstrings_stats[j].stat_offset;
if (pf->hw.func_caps.vmdq) {
pf->num_vmdq_vsis = I40E_DEFAULT_NUM_VMDQ_VSI;
pf->flags |= I40E_FLAG_VMDQ_ENABLED;
+ pf->num_vmdq_qps = i40e_default_queues_per_vmdq(pf);
}
#ifdef I40E_FCOE
netdev->hw_enc_features |= NETIF_F_IP_CSUM |
NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_GRE |
NETIF_F_TSO;
netdev->features = NETIF_F_SG |
NETIF_F_SCTP_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_GRE |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER |
#include <linux/highuid.h>
/* get readq/writeq support for 32 bit kernels, use the low-first version */
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
/* File to be the magic between shared code and
* actual OS primitives
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
- hw->aq.asq.count = hw->aq.num_asq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_asq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.asq.count = hw->aq.num_asq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
- hw->aq.arq.count = hw->aq.num_arq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_arq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.arq.count = hw->aq.num_arq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
#include <linux/pci.h>
/* get readq/writeq support for 32 bit kernels, use the low-first version */
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
/* File to be the magic between shared code and
* actual OS primitives
desc->l4i_chk = 0;
desc->byte_cnt = length;
- desc->buf_ptr = dma_map_single(dev->dev.parent, data,
- length, DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(dev->dev.parent, desc->buf_ptr))) {
- WARN(1, "dma_map_single failed!\n");
- return -ENOMEM;
+
+ if (length <= 8 && (uintptr_t)data & 0x7) {
+ /* Copy unaligned small data fragment to TSO header data area */
+ memcpy(txq->tso_hdrs + txq->tx_curr_desc * TSO_HEADER_SIZE,
+ data, length);
+ desc->buf_ptr = txq->tso_hdrs_dma
+ + txq->tx_curr_desc * TSO_HEADER_SIZE;
+ } else {
+ /* Alignment is okay, map buffer and hand off to hardware */
+ txq->tx_desc_mapping[tx_index] = DESC_DMA_MAP_SINGLE;
+ desc->buf_ptr = dma_map_single(dev->dev.parent, data,
+ length, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(dev->dev.parent,
+ desc->buf_ptr))) {
+ WARN(1, "dma_map_single failed!\n");
+ return -ENOMEM;
+ }
}
cmd_sts = BUFFER_OWNED_BY_DMA;
}
static inline void
-txq_put_hdr_tso(struct sk_buff *skb, struct tx_queue *txq, int length)
+txq_put_hdr_tso(struct sk_buff *skb, struct tx_queue *txq, int length,
+ u32 *first_cmd_sts, bool first_desc)
{
struct mv643xx_eth_private *mp = txq_to_mp(txq);
int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
int ret;
u32 cmd_csum = 0;
u16 l4i_chk = 0;
+ u32 cmd_sts;
tx_index = txq->tx_curr_desc;
desc = &txq->tx_desc_area[tx_index];
desc->byte_cnt = hdr_len;
desc->buf_ptr = txq->tso_hdrs_dma +
txq->tx_curr_desc * TSO_HEADER_SIZE;
- desc->cmd_sts = cmd_csum | BUFFER_OWNED_BY_DMA | TX_FIRST_DESC |
+ cmd_sts = cmd_csum | BUFFER_OWNED_BY_DMA | TX_FIRST_DESC |
GEN_CRC;
+ /* Defer updating the first command descriptor until all
+ * following descriptors have been written.
+ */
+ if (first_desc)
+ *first_cmd_sts = cmd_sts;
+ else
+ desc->cmd_sts = cmd_sts;
+
txq->tx_curr_desc++;
if (txq->tx_curr_desc == txq->tx_ring_size)
txq->tx_curr_desc = 0;
int desc_count = 0;
struct tso_t tso;
int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ struct tx_desc *first_tx_desc;
+ u32 first_cmd_sts = 0;
/* Count needed descriptors */
if ((txq->tx_desc_count + tso_count_descs(skb)) >= txq->tx_ring_size) {
return -EBUSY;
}
+ first_tx_desc = &txq->tx_desc_area[txq->tx_curr_desc];
+
/* Initialize the TSO handler, and prepare the first payload */
tso_start(skb, &tso);
total_len = skb->len - hdr_len;
while (total_len > 0) {
+ bool first_desc = (desc_count == 0);
char *hdr;
data_left = min_t(int, skb_shinfo(skb)->gso_size, total_len);
/* prepare packet headers: MAC + IP + TCP */
hdr = txq->tso_hdrs + txq->tx_curr_desc * TSO_HEADER_SIZE;
tso_build_hdr(skb, hdr, &tso, data_left, total_len == 0);
- txq_put_hdr_tso(skb, txq, data_left);
+ txq_put_hdr_tso(skb, txq, data_left, &first_cmd_sts,
+ first_desc);
while (data_left > 0) {
int size;
__skb_queue_tail(&txq->tx_skb, skb);
skb_tx_timestamp(skb);
+ /* ensure all other descriptors are written before first cmd_sts */
+ wmb();
+ first_tx_desc->cmd_sts = first_cmd_sts;
+
/* clear TX_END status */
mp->work_tx_end &= ~(1 << txq->index);
for_each_available_child_of_node(np, pnp) {
ret = mv643xx_eth_shared_of_add_port(pdev, pnp);
- if (ret)
+ if (ret) {
+ of_node_put(pnp);
return ret;
+ }
}
return 0;
}
}
}
- memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+ memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
INIT_WORK(&priv->mfunc.master.comm_work,
mlx4_master_comm_channel);
tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_SVLAN;
else if (vlan_proto == ETH_P_8021Q)
tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_CVLAN;
+ else
+ tx_desc->ctrl.ins_vlan = 0;
tx_desc->ctrl.fence_size = real_size;
return;
}
- memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+ memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
s_eqe->slave_id = slave;
/* ensure all information is written before setting the ownersip bit */
dma_wmb();
* and performing a NOP command
*/
for(i = 0; !err && (i < dev->caps.num_comp_vectors); ++i) {
+ /* Make sure request_irq was called */
+ if (!priv->eq_table.eq[i].have_irq)
+ continue;
+
/* Temporary use polling for command completions */
mlx4_cmd_use_polling(dev);
if (msi_x) {
int nreq = dev->caps.num_ports * num_online_cpus() + 1;
- bool shared_ports = false;
nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
nreq);
- if (nreq > MAX_MSIX) {
+ if (nreq > MAX_MSIX)
nreq = MAX_MSIX;
- shared_ports = true;
- }
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
bitmap_zero(priv->eq_table.eq[MLX4_EQ_ASYNC].actv_ports.ports,
dev->caps.num_ports);
- if (MLX4_IS_LEGACY_EQ_MODE(dev->caps))
- shared_ports = true;
-
for (i = 0; i < dev->caps.num_comp_vectors + 1; i++) {
if (i == MLX4_EQ_ASYNC)
continue;
priv->eq_table.eq[i].irq =
entries[i + 1 - !!(i > MLX4_EQ_ASYNC)].vector;
- if (shared_ports) {
+ if (MLX4_IS_LEGACY_EQ_MODE(dev->caps)) {
bitmap_fill(priv->eq_table.eq[i].actv_ports.ports,
dev->caps.num_ports);
/* We don't set affinity hint when there
* SOFTWARE.
*/
-#include <asm-generic/kmap_types.h>
+#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/pci.h>
return;
priv->vlan.filter_disabled = false;
+ if (priv->netdev->flags & IFF_PROMISC)
+ return;
mlx5e_del_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID, 0);
}
return;
priv->vlan.filter_disabled = true;
+ if (priv->netdev->flags & IFF_PROMISC)
+ return;
mlx5e_add_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID, 0);
}
bool enable_broadcast = !ea->broadcast_enabled && broadcast_enabled;
bool disable_broadcast = ea->broadcast_enabled && !broadcast_enabled;
- if (enable_promisc)
+ if (enable_promisc) {
mlx5e_add_eth_addr_rule(priv, &ea->promisc, MLX5E_PROMISC);
+ if (!priv->vlan.filter_disabled)
+ mlx5e_add_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID,
+ 0);
+ }
if (enable_allmulti)
mlx5e_add_eth_addr_rule(priv, &ea->allmulti, MLX5E_ALLMULTI);
if (enable_broadcast)
mlx5e_del_eth_addr_from_flow_table(priv, &ea->broadcast);
if (disable_allmulti)
mlx5e_del_eth_addr_from_flow_table(priv, &ea->allmulti);
- if (disable_promisc)
+ if (disable_promisc) {
+ if (!priv->vlan.filter_disabled)
+ mlx5e_del_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID,
+ 0);
mlx5e_del_eth_addr_from_flow_table(priv, &ea->promisc);
+ }
ea->promisc_enabled = promisc_enabled;
ea->allmulti_enabled = allmulti_enabled;
* SOFTWARE.
*/
-#include <asm-generic/kmap_types.h>
+#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
* SOFTWARE.
*/
-#include <asm-generic/kmap_types.h>
+#include <linux/highmem.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mlx5/driver.h>
int err;
memset(in, 0, sizeof(in));
- MLX5_SET(ptys_reg, in, local_port, local_port);
+ MLX5_SET(pvlc_reg, in, local_port, local_port);
err = mlx5_core_access_reg(dev, in, sizeof(in), pvlc,
pvlc_size, MLX5_REG_PVLC, 0, 0);
int err;
int ret;
+ mlxsw_core->emad.trans_active = true;
+
err = mlxsw_core_skb_transmit(mlxsw_core->driver_priv, skb, tx_info);
if (err) {
dev_err(mlxsw_core->bus_info->dev, "Failed to transmit EMAD (tid=%llx)\n",
mlxsw_core->emad.tid);
dev_kfree_skb(skb);
- return err;
+ goto trans_inactive_out;
}
- mlxsw_core->emad.trans_active = true;
ret = wait_event_timeout(mlxsw_core->emad.wait,
!(mlxsw_core->emad.trans_active),
msecs_to_jiffies(MLXSW_EMAD_TIMEOUT_MS));
if (!ret) {
dev_warn(mlxsw_core->bus_info->dev, "EMAD timed-out (tid=%llx)\n",
mlxsw_core->emad.tid);
- mlxsw_core->emad.trans_active = false;
- return -EIO;
+ err = -EIO;
+ goto trans_inactive_out;
}
return 0;
+
+trans_inactive_out:
+ mlxsw_core->emad.trans_active = false;
+ return err;
}
static int mlxsw_emad_process_status(struct mlxsw_core *mlxsw_core,
{
u16 max_index, be_index;
u16 offset; /* byte offset inside the array */
+ u8 in_byte_index;
BUG_ON(index && !item->element_size);
if (item->offset % sizeof(u32) != 0 ||
max_index = (item->size.bytes << 3) / item->element_size - 1;
be_index = max_index - index;
offset = be_index * item->element_size >> 3;
- *shift = index % (BITS_PER_BYTE / item->element_size) << 1;
+ in_byte_index = index % (BITS_PER_BYTE / item->element_size);
+ *shift = in_byte_index * item->element_size;
return item->offset + offset;
}
if (in_mbox)
memcpy(mlxsw_pci->cmd.in_mbox.buf, in_mbox, in_mbox_size);
- mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, in_mapaddr >> 32);
- mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, in_mapaddr);
+ mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, upper_32_bits(in_mapaddr));
+ mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, lower_32_bits(in_mapaddr));
- mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, out_mapaddr >> 32);
- mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, out_mapaddr);
+ mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, upper_32_bits(out_mapaddr));
+ mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, lower_32_bits(out_mapaddr));
mlxsw_pci_write32(mlxsw_pci, CIR_IN_MODIFIER, in_mod);
mlxsw_pci_write32(mlxsw_pci, CIR_TOKEN, 0);
return 0;
err_register_netdev:
-err_port_admin_status_set:
err_port_mac_learning_mode_set:
err_port_stp_state_set:
+err_port_admin_status_set:
err_port_mtu_set:
err_port_speed_set:
err_port_swid_set:
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 mask = 0;
+ unsigned long flags;
+ unsigned int irq = 0;
/*
* First disable irq(s) and then
if (!using_multi_irqs(dev)) {
if (np->msi_flags & NV_MSI_X_ENABLED)
- disable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+ irq = np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector;
else
- disable_irq_lockdep(np->pci_dev->irq);
+ irq = np->pci_dev->irq;
mask = np->irqmask;
} else {
if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
- disable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ irq = np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector;
mask |= NVREG_IRQ_RX_ALL;
}
if (np->nic_poll_irq & NVREG_IRQ_TX_ALL) {
- disable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+ irq = np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector;
mask |= NVREG_IRQ_TX_ALL;
}
if (np->nic_poll_irq & NVREG_IRQ_OTHER) {
- disable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+ irq = np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector;
mask |= NVREG_IRQ_OTHER;
}
}
- /* disable_irq() contains synchronize_irq, thus no irq handler can run now */
+
+ disable_irq_nosync_lockdep_irqsave(irq, &flags);
+ synchronize_irq(irq);
if (np->recover_error) {
np->recover_error = 0;
nv_nic_irq_optimized(0, dev);
else
nv_nic_irq(0, dev);
- if (np->msi_flags & NV_MSI_X_ENABLED)
- enable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
- else
- enable_irq_lockdep(np->pci_dev->irq);
} else {
if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
np->nic_poll_irq &= ~NVREG_IRQ_RX_ALL;
nv_nic_irq_rx(0, dev);
- enable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
}
if (np->nic_poll_irq & NVREG_IRQ_TX_ALL) {
np->nic_poll_irq &= ~NVREG_IRQ_TX_ALL;
nv_nic_irq_tx(0, dev);
- enable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
}
if (np->nic_poll_irq & NVREG_IRQ_OTHER) {
np->nic_poll_irq &= ~NVREG_IRQ_OTHER;
nv_nic_irq_other(0, dev);
- enable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
}
}
+ enable_irq_lockdep_irqrestore(irq, &flags);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
mac[5] = tmp >> 8;
}
-static void __lpc_eth_clock_enable(struct netdata_local *pldat,
- bool enable)
+static void __lpc_eth_clock_enable(struct netdata_local *pldat, bool enable)
{
if (enable)
- clk_enable(pldat->clk);
+ clk_prepare_enable(pldat->clk);
else
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
}
static void __lpc_params_setup(struct netdata_local *pldat)
err_out_iounmap:
iounmap(pldat->net_base);
err_out_disable_clocks:
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
clk_put(pldat->clk);
err_out_free_dev:
free_netdev(ndev);
iounmap(pldat->net_base);
mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
clk_put(pldat->clk);
free_netdev(ndev);
if (netif_running(ndev)) {
netif_device_detach(ndev);
__lpc_eth_shutdown(pldat);
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
/*
* Reset again now clock is disable to be sure
struct sh_eth_txdesc *txdesc = NULL;
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
- int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1;
dma_addr_t dma_addr;
mdp->cur_rx = 0;
/* RX descriptor */
rxdesc = &mdp->rx_ring[i];
- /* The size of the buffer is a multiple of 16 bytes. */
- rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
+ /* The size of the buffer is a multiple of 32 bytes. */
+ rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 32);
dma_addr = dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length,
DMA_FROM_DEVICE);
struct sk_buff *skb;
u16 pkt_len = 0;
u32 desc_status;
- int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1;
dma_addr_t dma_addr;
boguscnt = min(boguscnt, *quota);
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_unmap_single(&ndev->dev, rxdesc->addr,
- ALIGN(mdp->rx_buf_sz, 16),
+ ALIGN(mdp->rx_buf_sz, 32),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) {
entry = mdp->dirty_rx % mdp->num_rx_ring;
rxdesc = &mdp->rx_ring[entry];
- /* The size of the buffer is 16 byte boundary. */
- rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
+ /* The size of the buffer is 32 byte boundary. */
+ rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 32);
if (mdp->rx_skbuff[entry] == NULL) {
skb = netdev_alloc_skb(ndev, skbuff_size);
#include <net/ip_fib.h>
#include <net/netevent.h>
#include <net/arp.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include <generated/utsrelease.h>
#include "rocker.h"
#ifdef USE_PHY_WORK_AROUND
if (smsc911x_phy_loopbacktest(dev) < 0) {
SMSC_WARN(pdata, hw, "Failed Loop Back Test");
+ phy_disconnect(phydev);
return -ENODEV;
}
SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
#include <linux/if_vlan.h>
spinlock_t lock;
struct platform_device *pdev;
struct net_device *ndev;
+ struct device_node *phy_node;
struct napi_struct napi_rx;
struct napi_struct napi_tx;
struct device *dev;
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
- slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
+ if (priv->phy_node)
+ slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
+ &cpsw_adjust_link, 0, slave->data->phy_if);
+ else
+ slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
&cpsw_adjust_link, slave->data->phy_if);
if (IS_ERR(slave->phy)) {
dev_err(priv->dev, "phy %s not found on slave %d\n",
slave->port_vlan = data->dual_emac_res_vlan;
}
-static int cpsw_probe_dt(struct cpsw_platform_data *data,
+static int cpsw_probe_dt(struct cpsw_priv *priv,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *slave_node;
+ struct cpsw_platform_data *data = &priv->data;
int i = 0, ret;
u32 prop;
if (strcmp(slave_node->name, "slave"))
continue;
+ priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);
}
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
-
slave_data->phy_if = of_get_phy_mode(slave_node);
if (slave_data->phy_if < 0) {
dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);
- if (cpsw_probe_dt(&priv->data, pdev)) {
+ if (cpsw_probe_dt(priv, pdev)) {
dev_err(&pdev->dev, "cpsw: platform data missing\n");
ret = -ENODEV;
goto clean_runtime_disable_ret;
mac_phy_link = true;
slave->open = true;
- if (gbe_dev->num_slaves >= gbe_dev->max_num_slaves)
+ if (gbe_dev->num_slaves >= gbe_dev->max_num_slaves) {
+ of_node_put(port);
break;
+ }
}
/* of_phy_connect() is needed only for MAC-PHY interface */
continue;
}
gbe_dev->num_slaves++;
- if (gbe_dev->num_slaves >= gbe_dev->max_num_slaves)
+ if (gbe_dev->num_slaves >= gbe_dev->max_num_slaves) {
+ of_node_put(interface);
break;
+ }
}
of_node_put(interfaces);
}
skb_put(skb, pkt_len);
- skb->protocol = eth_type_trans(skb, dev);
rhine_rx_vlan_tag(skb, desc, data_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
netif_receive_skb(skb);
u64_stats_update_begin(&rp->rx_stats.syncp);
rt = ip_route_output_key(geneve->net, fl4);
if (IS_ERR(rt)) {
netdev_dbg(dev, "no route to %pI4\n", &fl4->daddr);
- dev->stats.tx_carrier_errors++;
- return rt;
+ return ERR_PTR(-ENETUNREACH);
}
if (rt->dst.dev == dev) { /* is this necessary? */
netdev_dbg(dev, "circular route to %pI4\n", &fl4->daddr);
- dev->stats.collisions++;
ip_rt_put(rt);
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ELOOP);
}
return rt;
}
struct ip_tunnel_info *info = NULL;
struct rtable *rt = NULL;
const struct iphdr *iip; /* interior IP header */
+ int err = -EINVAL;
struct flowi4 fl4;
__u8 tos, ttl;
__be16 sport;
bool udp_csum;
__be16 df;
- int err;
if (geneve->collect_md) {
info = skb_tunnel_info(skb);
rt = geneve_get_rt(skb, dev, &fl4, info);
if (IS_ERR(rt)) {
netdev_dbg(dev, "no route to %pI4\n", &fl4.daddr);
- dev->stats.tx_carrier_errors++;
+ err = PTR_ERR(rt);
goto tx_error;
}
tx_error:
dev_kfree_skb(skb);
err:
- dev->stats.tx_errors++;
+ if (err == -ELOOP)
+ dev->stats.collisions++;
+ else if (err == -ENETUNREACH)
+ dev->stats.tx_carrier_errors++;
+ else
+ dev->stats.tx_errors++;
return NETDEV_TX_OK;
}
+static int geneve_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
+{
+ struct ip_tunnel_info *info = skb_tunnel_info(skb);
+ struct geneve_dev *geneve = netdev_priv(dev);
+ struct rtable *rt;
+ struct flowi4 fl4;
+
+ if (ip_tunnel_info_af(info) != AF_INET)
+ return -EINVAL;
+
+ rt = geneve_get_rt(skb, dev, &fl4, info);
+ if (IS_ERR(rt))
+ return PTR_ERR(rt);
+
+ ip_rt_put(rt);
+ info->key.u.ipv4.src = fl4.saddr;
+ info->key.tp_src = udp_flow_src_port(geneve->net, skb,
+ 1, USHRT_MAX, true);
+ info->key.tp_dst = geneve->dst_port;
+ return 0;
+}
+
static const struct net_device_ops geneve_netdev_ops = {
.ndo_init = geneve_init,
.ndo_uninit = geneve_uninit,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_fill_metadata_dst = geneve_fill_metadata_dst,
};
static void geneve_get_drvinfo(struct net_device *dev,
__be16 dst_port = htons(GENEVE_UDP_PORT);
__u8 ttl = 0, tos = 0;
bool metadata = false;
- __be32 rem_addr;
- __u32 vni;
+ __be32 rem_addr = 0;
+ __u32 vni = 0;
- if (!data[IFLA_GENEVE_ID] || !data[IFLA_GENEVE_REMOTE])
- return -EINVAL;
+ if (data[IFLA_GENEVE_ID])
+ vni = nla_get_u32(data[IFLA_GENEVE_ID]);
- vni = nla_get_u32(data[IFLA_GENEVE_ID]);
- rem_addr = nla_get_in_addr(data[IFLA_GENEVE_REMOTE]);
+ if (data[IFLA_GENEVE_REMOTE])
+ rem_addr = nla_get_in_addr(data[IFLA_GENEVE_REMOTE]);
if (data[IFLA_GENEVE_TTL])
ttl = nla_get_u8(data[IFLA_GENEVE_TTL]);
#define TUN_OFFLOADS (NETIF_F_HW_CSUM | NETIF_F_TSO_ECN | NETIF_F_TSO | \
NETIF_F_TSO6 | NETIF_F_UFO)
#define RX_OFFLOADS (NETIF_F_GRO | NETIF_F_LRO)
-#define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG)
+#define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG | NETIF_F_FRAGLIST)
static struct macvlan_dev *macvtap_get_vlan_rcu(const struct net_device *dev)
{
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
+config DP83848_PHY
+ tristate "Driver for Texas Instruments DP83848 PHY"
+ ---help---
+ Supports the DP83848 PHY.
+
config DP83867_PHY
tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
---help---
busses. It is required by the Octeon and ThunderX ethernet device
drivers.
- If in doubt, say Y.
-
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
+obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
--- /dev/null
+/*
+ * Driver for the Texas Instruments DP83848 PHY
+ *
+ * Copyright (C) 2015 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DP83848_PHY_ID 0x20005c90
+
+/* Registers */
+#define DP83848_MICR 0x11
+#define DP83848_MISR 0x12
+
+/* MICR Register Fields */
+#define DP83848_MICR_INT_OE BIT(0) /* Interrupt Output Enable */
+#define DP83848_MICR_INTEN BIT(1) /* Interrupt Enable */
+
+/* MISR Register Fields */
+#define DP83848_MISR_RHF_INT_EN BIT(0) /* Receive Error Counter */
+#define DP83848_MISR_FHF_INT_EN BIT(1) /* False Carrier Counter */
+#define DP83848_MISR_ANC_INT_EN BIT(2) /* Auto-negotiation complete */
+#define DP83848_MISR_DUP_INT_EN BIT(3) /* Duplex Status */
+#define DP83848_MISR_SPD_INT_EN BIT(4) /* Speed status */
+#define DP83848_MISR_LINK_INT_EN BIT(5) /* Link status */
+#define DP83848_MISR_ED_INT_EN BIT(6) /* Energy detect */
+#define DP83848_MISR_LQM_INT_EN BIT(7) /* Link Quality Monitor */
+
+static int dp83848_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, DP83848_MISR);
+
+ return err < 0 ? err : 0;
+}
+
+static int dp83848_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = phy_write(phydev, DP83848_MICR,
+ DP83848_MICR_INT_OE |
+ DP83848_MICR_INTEN);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, DP83848_MISR,
+ DP83848_MISR_ANC_INT_EN |
+ DP83848_MISR_DUP_INT_EN |
+ DP83848_MISR_SPD_INT_EN |
+ DP83848_MISR_LINK_INT_EN);
+ }
+
+ return phy_write(phydev, DP83848_MICR, 0x0);
+}
+
+static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
+ { DP83848_PHY_ID, 0xfffffff0 },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
+
+static struct phy_driver dp83848_driver[] = {
+ {
+ .phy_id = DP83848_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83848",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+
+ .soft_reset = genphy_soft_reset,
+ .config_init = genphy_config_init,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+
+ /* IRQ related */
+ .ack_interrupt = dp83848_ack_interrupt,
+ .config_intr = dp83848_config_intr,
+
+ .driver = { .owner = THIS_MODULE, },
+ },
+};
+module_phy_driver(dp83848_driver);
+
+MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com");
+MODULE_LICENSE("GPL");
if (!iprop || len != sizeof(uint32_t)) {
dev_err(&pdev->dev, "mdio-mux child node %s is "
"missing a 'reg' property\n", np2->full_name);
+ of_node_put(np2);
return -ENODEV;
}
if (be32_to_cpup(iprop) & ~s->mask) {
dev_err(&pdev->dev, "mdio-mux child node %s has "
"a 'reg' value with unmasked bits\n",
np2->full_name);
+ of_node_put(np2);
return -ENODEV;
}
}
dev_err(dev,
"Error: Failed to allocate memory for child\n");
ret_val = -ENOMEM;
+ of_node_put(child_bus_node);
break;
}
cb->bus_number = v;
return 0;
}
+static int ksz9031_read_status(struct phy_device *phydev)
+{
+ int err;
+ int regval;
+
+ err = genphy_read_status(phydev);
+ if (err)
+ return err;
+
+ /* Make sure the PHY is not broken. Read idle error count,
+ * and reset the PHY if it is maxed out.
+ */
+ regval = phy_read(phydev, MII_STAT1000);
+ if ((regval & 0xFF) == 0xFF) {
+ phy_init_hw(phydev);
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+
static int ksz8873mll_config_aneg(struct phy_device *phydev)
{
return 0;
.driver_data = &ksz9021_type,
.config_init = ksz9031_config_init,
.config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
+ .read_status = ksz9031_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.suspend = genphy_suspend,
static int smsc_phy_config_init(struct phy_device *phydev)
{
+ int __maybe_unused len;
+ struct device *dev __maybe_unused = &phydev->dev;
+ struct device_node *of_node __maybe_unused = dev->of_node;
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int enable_energy = 1;
if (rc < 0)
return rc;
- /* Enable energy detect mode for this SMSC Transceivers */
- rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
- rc | MII_LAN83C185_EDPWRDOWN);
- if (rc < 0)
- return rc;
+ if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
+ enable_energy = 0;
+
+ if (enable_energy) {
+ /* Enable energy detect mode for this SMSC Transceivers */
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+ }
return smsc_phy_ack_interrupt(phydev);
}
if (po->pppoe_dev == dev &&
sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
pppox_unbind_sock(sk);
- sk->sk_state = PPPOX_ZOMBIE;
sk->sk_state_change(sk);
po->pppoe_dev = NULL;
dev_put(dev);
po = pppox_sk(sk);
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
+ if (po->pppoe_dev) {
dev_put(po->pppoe_dev);
po->pppoe_dev = NULL;
}
* Aten UC210T
* ASIX AX88172
* Billionton Systems, USB2AR
+ * Billionton Systems, GUSB2AM-1G-B
* Buffalo LUA-U2-KTX
* Corega FEther USB2-TX
* D-Link DUB-E100
}
rx->ax_skb = netdev_alloc_skb_ip_align(dev->net,
rx->size);
- if (!rx->ax_skb)
+ if (!rx->ax_skb) {
+ rx->size = 0;
return 0;
+ }
}
if (rx->size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
// Billionton Systems, USB2AR
USB_DEVICE (0x08dd, 0x90ff),
.driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Billionton Systems, GUSB2AM-1G-B
+ USB_DEVICE(0x08dd, 0x0114),
+ .driver_info = (unsigned long) &ax88178_info,
}, {
// ATEN UC210T
USB_DEVICE (0x0557, 0x2009),
{QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */
{QMI_FIXED_INTF(0x1199, 0x9057, 8)},
{QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */
+ {QMI_FIXED_INTF(0x1199, 0x9070, 8)}, /* Sierra Wireless MC74xx/EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9070, 10)}, /* Sierra Wireless MC74xx/EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx/EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx/EM74xx */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
return 0;
}
+static int egress_ipv4_tun_info(struct net_device *dev, struct sk_buff *skb,
+ struct ip_tunnel_info *info,
+ __be16 sport, __be16 dport)
+{
+ struct vxlan_dev *vxlan = netdev_priv(dev);
+ struct rtable *rt;
+ struct flowi4 fl4;
+
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.flowi4_tos = RT_TOS(info->key.tos);
+ fl4.flowi4_mark = skb->mark;
+ fl4.flowi4_proto = IPPROTO_UDP;
+ fl4.daddr = info->key.u.ipv4.dst;
+
+ rt = ip_route_output_key(vxlan->net, &fl4);
+ if (IS_ERR(rt))
+ return PTR_ERR(rt);
+ ip_rt_put(rt);
+
+ info->key.u.ipv4.src = fl4.saddr;
+ info->key.tp_src = sport;
+ info->key.tp_dst = dport;
+ return 0;
+}
+
+static int vxlan_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
+{
+ struct vxlan_dev *vxlan = netdev_priv(dev);
+ struct ip_tunnel_info *info = skb_tunnel_info(skb);
+ __be16 sport, dport;
+
+ sport = udp_flow_src_port(dev_net(dev), skb, vxlan->cfg.port_min,
+ vxlan->cfg.port_max, true);
+ dport = info->key.tp_dst ? : vxlan->cfg.dst_port;
+
+ if (ip_tunnel_info_af(info) == AF_INET)
+ return egress_ipv4_tun_info(dev, skb, info, sport, dport);
+ return -EINVAL;
+}
+
static const struct net_device_ops vxlan_netdev_ops = {
.ndo_init = vxlan_init,
.ndo_uninit = vxlan_uninit,
.ndo_fdb_add = vxlan_fdb_add,
.ndo_fdb_del = vxlan_fdb_delete,
.ndo_fdb_dump = vxlan_fdb_dump,
+ .ndo_fill_metadata_dst = vxlan_fill_metadata_dst,
};
/* Info for udev, that this is a virtual tunnel endpoint */
struct vxlan_config conf;
int err;
- if (!data[IFLA_VXLAN_ID])
- return -EINVAL;
-
memset(&conf, 0, sizeof(conf));
- conf.vni = nla_get_u32(data[IFLA_VXLAN_ID]);
+
+ if (data[IFLA_VXLAN_ID])
+ conf.vni = nla_get_u32(data[IFLA_VXLAN_ID]);
if (data[IFLA_VXLAN_GROUP]) {
conf.remote_ip.sin.sin_addr.s_addr = nla_get_in_addr(data[IFLA_VXLAN_GROUP]);
#define TARGET_10X_MAX_FRAG_ENTRIES 0
/* 10.2 parameters */
-#define TARGET_10_2_DMA_BURST_SIZE 1
+#define TARGET_10_2_DMA_BURST_SIZE 0
/* Target specific defines for WMI-TLV firmware */
#define TARGET_TLV_NUM_VDEVS 4
#define TARGET_10_4_TX_DBG_LOG_SIZE 1024
#define TARGET_10_4_NUM_WDS_ENTRIES 32
-#define TARGET_10_4_DMA_BURST_SIZE 1
+#define TARGET_10_4_DMA_BURST_SIZE 0
#define TARGET_10_4_MAC_AGGR_DELIM 0
#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
#define TARGET_10_4_VOW_CONFIG 0
board_filename, ret);
continue;
}
+ of_node_put(node);
return true;
}
return false;
hw->max_rate_tries = 10;
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);
+ hw->extra_tx_headroom = 4;
hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
#ifdef CONFIG_B43_BCMA
static const struct bcma_device_id b43_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x15, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1C, BCMA_ANY_CLASS),
u8 *pn = seq.ccmp.pn;
ieee80211_get_key_rx_seq(key, i, &seq);
- aes_sc->pn = cpu_to_le64(
+ aes_sc[i].pn = cpu_to_le64(
(u64)pn[5] |
((u64)pn[4] << 8) |
((u64)pn[3] << 16) |
};
MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
-MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
break;
case WLAN_CIPHER_SUITE_CCMP:
if (sta) {
- u8 *pn = seq.ccmp.pn;
+ u64 pn64;
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
- ieee80211_get_key_tx_seq(key, &seq);
- aes_tx_sc->pn = cpu_to_le64((u64)pn[5] |
- ((u64)pn[4] << 8) |
- ((u64)pn[3] << 16) |
- ((u64)pn[2] << 24) |
- ((u64)pn[1] << 32) |
- ((u64)pn[0] << 40));
+ pn64 = atomic64_read(&key->tx_pn);
+ aes_tx_sc->pn = cpu_to_le64(pn64);
} else {
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
}
u8 *pn = seq.ccmp.pn;
ieee80211_get_key_rx_seq(key, i, &seq);
- aes_sc->pn = cpu_to_le64((u64)pn[5] |
- ((u64)pn[4] << 8) |
- ((u64)pn[3] << 16) |
- ((u64)pn[2] << 24) |
- ((u64)pn[1] << 32) |
- ((u64)pn[0] << 40));
+ aes_sc[i].pn = cpu_to_le64((u64)pn[5] |
+ ((u64)pn[4] << 8) |
+ ((u64)pn[3] << 16) |
+ ((u64)pn[2] << 24) |
+ ((u64)pn[1] << 32) |
+ ((u64)pn[0] << 40));
}
data->use_rsc_tsc = true;
break;
switch (key->cipher) {
case WLAN_CIPHER_SUITE_CCMP:
- iwl_mvm_aes_sc_to_seq(&sc->aes.tsc, &seq);
iwl_mvm_set_aes_rx_seq(sc->aes.unicast_rsc, key);
+ atomic64_set(&key->tx_pn, le64_to_cpu(sc->aes.tsc.pn));
break;
case WLAN_CIPHER_SUITE_TKIP:
iwl_mvm_tkip_sc_to_seq(&sc->tkip.tsc, &seq);
iwl_mvm_set_tkip_rx_seq(sc->tkip.unicast_rsc, key);
+ ieee80211_set_key_tx_seq(key, &seq);
break;
}
- ieee80211_set_key_tx_seq(key, &seq);
/* that's it for this key */
return;
* abort after reading the nvm in case RF Kill is on, we will complete
* the init seq later when RF kill will switch to off
*/
- if (iwl_mvm_is_radio_killed(mvm)) {
+ if (iwl_mvm_is_radio_hw_killed(mvm)) {
IWL_DEBUG_RF_KILL(mvm,
"jump over all phy activities due to RF kill\n");
iwl_remove_notification(&mvm->notif_wait, &calib_wait);
ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait,
MVM_UCODE_CALIB_TIMEOUT);
- if (ret && iwl_mvm_is_radio_killed(mvm)) {
+ if (ret && iwl_mvm_is_radio_hw_killed(mvm)) {
IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n");
ret = 1;
}
iwl_mvm_remove_time_event(mvm, mvmvif,
&mvmvif->time_event_data);
RCU_INIT_POINTER(mvm->csa_vif, NULL);
+ mvmvif->csa_countdown = false;
}
if (rcu_access_pointer(mvm->csa_tx_blocked_vif) == vif) {
test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status);
}
+static inline bool iwl_mvm_is_radio_hw_killed(struct iwl_mvm *mvm)
+{
+ return test_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
+}
+
/* Must be called with rcu_read_lock() held and it can only be
* released when mvmsta is not needed anymore.
*/
ieee80211_unregister_hw(mvm->hw);
iwl_mvm_leds_exit(mvm);
out_free:
+ flush_delayed_work(&mvm->fw_dump_wk);
iwl_phy_db_free(mvm->phy_db);
kfree(mvm->scan_cmd);
if (!cfg->no_power_up_nic_in_init || !mvm->nvm_file_name)
{IWL_PCI_DEVICE(0x095A, 0x5590, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5290, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5490, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5F10, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x5212, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x520A, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9000, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9400, iwl7265_2ac_cfg)},
/* 8000 Series */
{IWL_PCI_DEVICE(0x24F3, 0x0010, iwl8260_2ac_cfg)},
{ USB_DEVICE(0x0db0, 0x871c) },
{ USB_DEVICE(0x0db0, 0x899a) },
/* Ovislink */
+ { USB_DEVICE(0x1b75, 0x3070) },
{ USB_DEVICE(0x1b75, 0x3071) },
{ USB_DEVICE(0x1b75, 0x3072) },
{ USB_DEVICE(0x1b75, 0xa200) },
/* MSI support */
bool msi_support;
bool using_msi;
+ /* interrupt clear before set */
+ bool int_clear;
};
struct mp_adapter {
}
}
+static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 tmp = rtl_read_dword(rtlpriv, REG_HISR);
+
+ rtl_write_dword(rtlpriv, REG_HISR, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HISRE);
+ rtl_write_dword(rtlpriv, REG_HISRE, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HSISR);
+ rtl_write_dword(rtlpriv, REG_HSISR, tmp);
+}
+
void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ if (!rtlpci->int_clear)
+ rtl8821ae_clear_interrupt(hw);/*clear it here first*/
+
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
rtlpci->irq_enabled = true;
rtl8821ae_bt_reg_init(hw);
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
if (rtlpriv->cfg->mod_params->disable_watchdog)
pr_info("watchdog disabled\n");
rtlpriv->psc.reg_fwctrl_lps = 3;
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
+ .int_clear = true,
.debug = DBG_EMERG,
.disable_watchdog = 0,
};
module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
bool, 0444);
+module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
/* default 0: 1 means disable */
bool disable_watchdog;
+
+ /* default 0: 1 means do not disable interrupts */
+ bool int_clear;
};
struct rtl_hal_usbint_cfg {
/* Use the number of queues requested by the frontend */
be->vif->queues = vzalloc(requested_num_queues *
sizeof(struct xenvif_queue));
+ if (!be->vif->queues) {
+ xenbus_dev_fatal(dev, -ENOMEM,
+ "allocating queues");
+ return;
+ }
+
be->vif->num_queues = requested_num_queues;
be->vif->stalled_queues = requested_num_queues;
}
static int xennet_create_queues(struct netfront_info *info,
- unsigned int num_queues)
+ unsigned int *num_queues)
{
unsigned int i;
int ret;
- info->queues = kcalloc(num_queues, sizeof(struct netfront_queue),
+ info->queues = kcalloc(*num_queues, sizeof(struct netfront_queue),
GFP_KERNEL);
if (!info->queues)
return -ENOMEM;
rtnl_lock();
- for (i = 0; i < num_queues; i++) {
+ for (i = 0; i < *num_queues; i++) {
struct netfront_queue *queue = &info->queues[i];
queue->id = i;
if (ret < 0) {
dev_warn(&info->netdev->dev,
"only created %d queues\n", i);
- num_queues = i;
+ *num_queues = i;
break;
}
napi_enable(&queue->napi);
}
- netif_set_real_num_tx_queues(info->netdev, num_queues);
+ netif_set_real_num_tx_queues(info->netdev, *num_queues);
rtnl_unlock();
- if (num_queues == 0) {
+ if (*num_queues == 0) {
dev_err(&info->netdev->dev, "no queues\n");
return -EINVAL;
}
if (info->queues)
xennet_destroy_queues(info);
- err = xennet_create_queues(info, num_queues);
+ err = xennet_create_queues(info, &num_queues);
if (err < 0)
goto destroy_ring;
int rc;
/* Stop the user from reading */
- if (pos > nvmem->size)
+ if (pos >= nvmem->size)
return 0;
if (pos + count > nvmem->size)
int rc;
/* Stop the user from writing */
- if (pos > nvmem->size)
+ if (pos >= nvmem->size)
return 0;
if (pos + count > nvmem->size)
return rc;
/* shift bits in-place */
- if (cell->bit_offset || cell->bit_offset)
+ if (cell->bit_offset || cell->nbits)
nvmem_shift_read_buffer_in_place(cell, buf);
*len = cell->bytes;
rc = regmap_raw_write(nvmem->regmap, cell->offset, buf, cell->bytes);
/* free the tmp buffer */
- if (cell->bit_offset)
+ if (cell->bit_offset || cell->nbits)
kfree(buf);
if (IS_ERR_VALUE(rc))
struct nvmem_device *nvmem;
struct regmap *regmap;
struct sunxi_sid *sid;
- int i, size;
+ int ret, i, size;
char *randomness;
sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
return PTR_ERR(nvmem);
randomness = kzalloc(sizeof(u8) * size, GFP_KERNEL);
+ if (!randomness) {
+ ret = -EINVAL;
+ goto err_unreg_nvmem;
+ }
+
for (i = 0; i < size; i++)
randomness[i] = sunxi_sid_read_byte(sid, i);
platform_set_drvdata(pdev, nvmem);
return 0;
+
+err_unreg_nvmem:
+ nvmem_unregister(nvmem);
+ return ret;
}
static int sunxi_sid_remove(struct platform_device *pdev)
{
struct resource *tmp;
+ /* exit if not a C8000 */
+ if (boot_cpu_data.cpu_type < mako)
+ return end;
+
pr_debug("LMMIO mismatch: PAT length = 0x%lx, MASK register = 0x%lx\n",
end - start, lba_len);
pr_debug("LBA: lmmio_space [0x%lx-0x%lx] - original\n", start, end);
- if (boot_cpu_data.cpu_type < mako) {
- pr_info("LBA: Not a C8000 system - not extending LMMIO range.\n");
- return end;
- }
end += lba_len;
if (end < start) /* fix overflow */
pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space,
lba_dev->hba.lmmio_space_offset);
if (lba_dev->hba.gmmio_space.flags) {
+ /* Not registering GMMIO space - according to docs it's not
+ * even used on HP-UX. */
/* pci_add_resource(&resources, &lba_dev->hba.gmmio_space); */
- pr_warn("LBA: Not registering GMMIO space %pR\n",
- &lba_dev->hba.gmmio_space);
}
pci_add_resource(&resources, &lba_dev->hba.bus_num);
BUG_ON(!chip);
if (!chip->irq_write_msi_msg)
chip->irq_write_msi_msg = pci_msi_domain_write_msg;
+ if (!chip->irq_mask)
+ chip->irq_mask = pci_msi_mask_irq;
+ if (!chip->irq_unmask)
+ chip->irq_unmask = pci_msi_unmask_irq;
}
/**
if (ret)
return ret;
- if (!node_online(node))
+ if (node >= MAX_NUMNODES || !node_online(node))
return -EINVAL;
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
menu "Performance monitor support"
config ARM_PMU
- depends on PERF_EVENTS && ARM
+ depends on PERF_EVENTS && (ARM || ARM64)
bool "ARM PMU framework"
default y
help
}
/* Now look up the logical CPU number */
- for_each_possible_cpu(cpu)
- if (dn == of_cpu_device_node_get(cpu))
+ for_each_possible_cpu(cpu) {
+ struct device_node *cpu_dn;
+
+ cpu_dn = of_cpu_device_node_get(cpu);
+ of_node_put(cpu_dn);
+
+ if (dn == cpu_dn)
break;
+ }
if (cpu >= nr_cpu_ids) {
pr_warn("Failed to find logical CPU for %s\n",
{ .compatible = "marvell,berlin2q-sata-phy" },
{ },
};
+MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
static struct platform_driver phy_berlin_sata_driver = {
.probe = phy_berlin_sata_probe,
out:
return ret;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
static
int ufs_qcom_phy_disable_vreg(struct phy *phy,
phy->is_ref_clk_enabled = false;
}
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
#define UFS_REF_CLK_EN (1 << 5)
{
ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
{
ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
/* Turn ON M-PHY RMMI interface clocks */
int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
out:
return ret;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
/* Turn OFF M-PHY RMMI interface clocks */
void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
phy->is_iface_clk_enabled = false;
}
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
{
return ret;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
{
return ret;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
u8 major, u16 minor, u16 step)
ufs_qcom_phy->host_ctrl_rev_minor = minor;
ufs_qcom_phy->host_ctrl_rev_step = step;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
{
return ret;
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
int ufs_qcom_phy_remove(struct phy *generic_phy,
struct ufs_qcom_phy *ufs_qcom_phy)
return ufs_qcom_phy->phy_spec_ops->
is_physical_coding_sublayer_ready(ufs_qcom_phy);
}
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
int ufs_qcom_phy_power_on(struct phy *generic_phy)
{
struct device_node *child;
struct regmap *grf;
unsigned int reg_offset;
+ int err;
grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
if (IS_ERR(grf)) {
return PTR_ERR(rk_phy->phy);
}
phy_set_drvdata(rk_phy->phy, rk_phy);
+
+ /* only power up usb phy when it use, so disable it when init*/
+ err = rockchip_usb_phy_power(rk_phy, 1);
+ if (err)
+ return err;
}
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
#include "pinctrl-imx.h"
enum imx25_pads {
- MX25_PAD_RESERVE0 = 1,
+ MX25_PAD_RESERVE0 = 0,
+ MX25_PAD_RESERVE1 = 1,
MX25_PAD_A10 = 2,
MX25_PAD_A13 = 3,
MX25_PAD_A14 = 4,
/* Pad names for the pinmux subsystem */
static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX25_PAD_RESERVE0),
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE1),
IMX_PINCTRL_PIN(MX25_PAD_A10),
IMX_PINCTRL_PIN(MX25_PAD_A13),
IMX_PINCTRL_PIN(MX25_PAD_A14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS1 */
- SUNXI_FUNCTION(0x3, "uart3"), /* PWM1 */
+ SUNXI_FUNCTION(0x3, "pwm"), /* PWM1 */
SUNXI_FUNCTION(0x5, "uart2"), /* CTS */
SUNXI_FUNCTION_IRQ(0x6, 13)), /* EINT13 */
};
#define DRIVER_NAME "ph1-sld8-pinctrl"
static const struct pinctrl_pin_desc ph1_sld8_pins[] = {
- UNIPHIER_PINCTRL_PIN(0, "PCA00", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(0, "PCA00", 0,
15, UNIPHIER_PIN_DRV_4_8,
15, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(1, "PCA01", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(1, "PCA01", 0,
16, UNIPHIER_PIN_DRV_4_8,
16, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(2, "PCA02", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(2, "PCA02", 0,
17, UNIPHIER_PIN_DRV_4_8,
17, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(3, "PCA03", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(3, "PCA03", 0,
18, UNIPHIER_PIN_DRV_4_8,
18, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(4, "PCA04", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(4, "PCA04", 0,
19, UNIPHIER_PIN_DRV_4_8,
19, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(5, "PCA05", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(5, "PCA05", 0,
20, UNIPHIER_PIN_DRV_4_8,
20, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(6, "PCA06", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(6, "PCA06", 0,
21, UNIPHIER_PIN_DRV_4_8,
21, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(7, "PCA07", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(7, "PCA07", 0,
22, UNIPHIER_PIN_DRV_4_8,
22, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(8, "PCA08", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(8, "PCA08", 0,
23, UNIPHIER_PIN_DRV_4_8,
23, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(9, "PCA09", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(9, "PCA09", 0,
24, UNIPHIER_PIN_DRV_4_8,
24, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(10, "PCA10", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(10, "PCA10", 0,
25, UNIPHIER_PIN_DRV_4_8,
25, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(11, "PCA11", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(11, "PCA11", 0,
26, UNIPHIER_PIN_DRV_4_8,
26, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(12, "PCA12", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(12, "PCA12", 0,
27, UNIPHIER_PIN_DRV_4_8,
27, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(13, "PCA13", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(13, "PCA13", 0,
28, UNIPHIER_PIN_DRV_4_8,
28, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(14, "PCA14", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(14, "PCA14", 0,
29, UNIPHIER_PIN_DRV_4_8,
29, UNIPHIER_PIN_PULL_DOWN),
UNIPHIER_PINCTRL_PIN(15, "XNFRE_GB", UNIPHIER_PIN_IECTRL_NONE,
UNIPHIER_PINCTRL_PIN(31, "NFD7_GB", UNIPHIER_PIN_IECTRL_NONE,
36, UNIPHIER_PIN_DRV_8_12_16_20,
128, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(32, "SDCLK", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(32, "SDCLK", 8,
40, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(33, "SDCMD", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(33, "SDCMD", 8,
44, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(34, "SDDAT0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(34, "SDDAT0", 8,
48, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(35, "SDDAT1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(35, "SDDAT1", 8,
52, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(36, "SDDAT2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(36, "SDDAT2", 8,
56, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(37, "SDDAT3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(37, "SDDAT3", 8,
60, UNIPHIER_PIN_DRV_8_12_16_20,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(38, "SDCD", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(38, "SDCD", 8,
-1, UNIPHIER_PIN_DRV_FIXED_4,
129, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(39, "SDWP", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(39, "SDWP", 8,
-1, UNIPHIER_PIN_DRV_FIXED_4,
130, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(40, "SDVOLC", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(40, "SDVOLC", 9,
-1, UNIPHIER_PIN_DRV_FIXED_4,
131, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(41, "USB0VBUS", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(41, "USB0VBUS", 0,
37, UNIPHIER_PIN_DRV_4_8,
37, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(42, "USB0OD", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(42, "USB0OD", 0,
38, UNIPHIER_PIN_DRV_4_8,
38, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(43, "USB1VBUS", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(43, "USB1VBUS", 0,
39, UNIPHIER_PIN_DRV_4_8,
39, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(44, "USB1OD", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(44, "USB1OD", 0,
40, UNIPHIER_PIN_DRV_4_8,
40, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(45, "PCRESET", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(45, "PCRESET", 0,
41, UNIPHIER_PIN_DRV_4_8,
41, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(46, "PCREG", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(46, "PCREG", 0,
42, UNIPHIER_PIN_DRV_4_8,
42, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(47, "PCCE2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(47, "PCCE2", 0,
43, UNIPHIER_PIN_DRV_4_8,
43, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(48, "PCVS1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(48, "PCVS1", 0,
44, UNIPHIER_PIN_DRV_4_8,
44, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(49, "PCCD2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(49, "PCCD2", 0,
45, UNIPHIER_PIN_DRV_4_8,
45, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(50, "PCCD1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(50, "PCCD1", 0,
46, UNIPHIER_PIN_DRV_4_8,
46, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(51, "PCREADY", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(51, "PCREADY", 0,
47, UNIPHIER_PIN_DRV_4_8,
47, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(52, "PCDOE", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(52, "PCDOE", 0,
48, UNIPHIER_PIN_DRV_4_8,
48, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(53, "PCCE1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(53, "PCCE1", 0,
49, UNIPHIER_PIN_DRV_4_8,
49, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(54, "PCWE", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(54, "PCWE", 0,
50, UNIPHIER_PIN_DRV_4_8,
50, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(55, "PCOE", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(55, "PCOE", 0,
51, UNIPHIER_PIN_DRV_4_8,
51, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(56, "PCWAIT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(56, "PCWAIT", 0,
52, UNIPHIER_PIN_DRV_4_8,
52, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(57, "PCIOWR", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(57, "PCIOWR", 0,
53, UNIPHIER_PIN_DRV_4_8,
53, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(58, "PCIORD", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(58, "PCIORD", 0,
54, UNIPHIER_PIN_DRV_4_8,
54, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(59, "HS0DIN0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(59, "HS0DIN0", 0,
55, UNIPHIER_PIN_DRV_4_8,
55, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(60, "HS0DIN1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(60, "HS0DIN1", 0,
56, UNIPHIER_PIN_DRV_4_8,
56, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(61, "HS0DIN2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(61, "HS0DIN2", 0,
57, UNIPHIER_PIN_DRV_4_8,
57, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(62, "HS0DIN3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(62, "HS0DIN3", 0,
58, UNIPHIER_PIN_DRV_4_8,
58, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(63, "HS0DIN4", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(63, "HS0DIN4", 0,
59, UNIPHIER_PIN_DRV_4_8,
59, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(64, "HS0DIN5", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(64, "HS0DIN5", 0,
60, UNIPHIER_PIN_DRV_4_8,
60, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(65, "HS0DIN6", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(65, "HS0DIN6", 0,
61, UNIPHIER_PIN_DRV_4_8,
61, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(66, "HS0DIN7", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(66, "HS0DIN7", 0,
62, UNIPHIER_PIN_DRV_4_8,
62, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(67, "HS0BCLKIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(67, "HS0BCLKIN", 0,
63, UNIPHIER_PIN_DRV_4_8,
63, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(68, "HS0VALIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(68, "HS0VALIN", 0,
64, UNIPHIER_PIN_DRV_4_8,
64, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(69, "HS0SYNCIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(69, "HS0SYNCIN", 0,
65, UNIPHIER_PIN_DRV_4_8,
65, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(70, "HSDOUT0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(70, "HSDOUT0", 0,
66, UNIPHIER_PIN_DRV_4_8,
66, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(71, "HSDOUT1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(71, "HSDOUT1", 0,
67, UNIPHIER_PIN_DRV_4_8,
67, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(72, "HSDOUT2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(72, "HSDOUT2", 0,
68, UNIPHIER_PIN_DRV_4_8,
68, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(73, "HSDOUT3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(73, "HSDOUT3", 0,
69, UNIPHIER_PIN_DRV_4_8,
69, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(74, "HSDOUT4", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(74, "HSDOUT4", 0,
70, UNIPHIER_PIN_DRV_4_8,
70, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(75, "HSDOUT5", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(75, "HSDOUT5", 0,
71, UNIPHIER_PIN_DRV_4_8,
71, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(76, "HSDOUT6", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(76, "HSDOUT6", 0,
72, UNIPHIER_PIN_DRV_4_8,
72, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(77, "HSDOUT7", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(77, "HSDOUT7", 0,
73, UNIPHIER_PIN_DRV_4_8,
73, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(78, "HSBCLKOUT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(78, "HSBCLKOUT", 0,
74, UNIPHIER_PIN_DRV_4_8,
74, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(79, "HSVALOUT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(79, "HSVALOUT", 0,
75, UNIPHIER_PIN_DRV_4_8,
75, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(80, "HSSYNCOUT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(80, "HSSYNCOUT", 0,
76, UNIPHIER_PIN_DRV_4_8,
76, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(81, "HS1DIN0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(81, "HS1DIN0", 0,
77, UNIPHIER_PIN_DRV_4_8,
77, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(82, "HS1DIN1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(82, "HS1DIN1", 0,
78, UNIPHIER_PIN_DRV_4_8,
78, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(83, "HS1DIN2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(83, "HS1DIN2", 0,
79, UNIPHIER_PIN_DRV_4_8,
79, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(84, "HS1DIN3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(84, "HS1DIN3", 0,
80, UNIPHIER_PIN_DRV_4_8,
80, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(85, "HS1DIN4", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(85, "HS1DIN4", 0,
81, UNIPHIER_PIN_DRV_4_8,
81, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(86, "HS1DIN5", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(86, "HS1DIN5", 0,
82, UNIPHIER_PIN_DRV_4_8,
82, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(87, "HS1DIN6", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(87, "HS1DIN6", 0,
83, UNIPHIER_PIN_DRV_4_8,
83, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(88, "HS1DIN7", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(88, "HS1DIN7", 0,
84, UNIPHIER_PIN_DRV_4_8,
84, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(89, "HS1BCLKIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(89, "HS1BCLKIN", 0,
85, UNIPHIER_PIN_DRV_4_8,
85, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(90, "HS1VALIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(90, "HS1VALIN", 0,
86, UNIPHIER_PIN_DRV_4_8,
86, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(91, "HS1SYNCIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(91, "HS1SYNCIN", 0,
87, UNIPHIER_PIN_DRV_4_8,
87, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(92, "AGCI", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(92, "AGCI", 3,
-1, UNIPHIER_PIN_DRV_FIXED_4,
132, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(93, "AGCR", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(93, "AGCR", 4,
-1, UNIPHIER_PIN_DRV_FIXED_4,
133, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(94, "AGCBS", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(94, "AGCBS", 5,
-1, UNIPHIER_PIN_DRV_FIXED_4,
134, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(95, "IECOUT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(95, "IECOUT", 0,
88, UNIPHIER_PIN_DRV_4_8,
88, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(96, "ASMCK", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(96, "ASMCK", 0,
89, UNIPHIER_PIN_DRV_4_8,
89, UNIPHIER_PIN_PULL_DOWN),
UNIPHIER_PINCTRL_PIN(97, "ABCKO", UNIPHIER_PIN_IECTRL_NONE,
UNIPHIER_PINCTRL_PIN(100, "ASDOUT1", UNIPHIER_PIN_IECTRL_NONE,
93, UNIPHIER_PIN_DRV_4_8,
93, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(101, "ARCOUT", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(101, "ARCOUT", 0,
94, UNIPHIER_PIN_DRV_4_8,
94, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(102, "SDA0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(102, "SDA0", 10,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(103, "SCL0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(103, "SCL0", 10,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(104, "SDA1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(104, "SDA1", 11,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(105, "SCL1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(105, "SCL1", 11,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(106, "DMDSDA0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(106, "DMDSDA0", 12,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(107, "DMDSCL0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(107, "DMDSCL0", 12,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(108, "DMDSDA1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(108, "DMDSDA1", 13,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(109, "DMDSCL1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(109, "DMDSCL1", 13,
-1, UNIPHIER_PIN_DRV_FIXED_4,
-1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(110, "SBO0", UNIPHIER_PIN_IECTRL_NONE,
UNIPHIER_PINCTRL_PIN(111, "SBI0", UNIPHIER_PIN_IECTRL_NONE,
96, UNIPHIER_PIN_DRV_4_8,
96, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(112, "SBO1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(112, "SBO1", 0,
97, UNIPHIER_PIN_DRV_4_8,
97, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(113, "SBI1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(113, "SBI1", 0,
98, UNIPHIER_PIN_DRV_4_8,
98, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(114, "TXD1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(114, "TXD1", 0,
99, UNIPHIER_PIN_DRV_4_8,
99, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(115, "RXD1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(115, "RXD1", 0,
100, UNIPHIER_PIN_DRV_4_8,
100, UNIPHIER_PIN_PULL_UP),
- UNIPHIER_PINCTRL_PIN(116, "HIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(116, "HIN", 1,
-1, UNIPHIER_PIN_DRV_FIXED_5,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(117, "VIN", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(117, "VIN", 2,
-1, UNIPHIER_PIN_DRV_FIXED_5,
-1, UNIPHIER_PIN_PULL_NONE),
- UNIPHIER_PINCTRL_PIN(118, "TCON0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(118, "TCON0", 0,
101, UNIPHIER_PIN_DRV_4_8,
101, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(119, "TCON1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(119, "TCON1", 0,
102, UNIPHIER_PIN_DRV_4_8,
102, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(120, "TCON2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(120, "TCON2", 0,
103, UNIPHIER_PIN_DRV_4_8,
103, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(121, "TCON3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(121, "TCON3", 0,
104, UNIPHIER_PIN_DRV_4_8,
104, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(122, "TCON4", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(122, "TCON4", 0,
105, UNIPHIER_PIN_DRV_4_8,
105, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(123, "TCON5", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(123, "TCON5", 0,
106, UNIPHIER_PIN_DRV_4_8,
106, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(124, "TCON6", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(124, "TCON6", 0,
107, UNIPHIER_PIN_DRV_4_8,
107, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(125, "TCON7", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(125, "TCON7", 0,
108, UNIPHIER_PIN_DRV_4_8,
108, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(126, "TCON8", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(126, "TCON8", 0,
109, UNIPHIER_PIN_DRV_4_8,
109, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(127, "PWMA", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(127, "PWMA", 0,
110, UNIPHIER_PIN_DRV_4_8,
110, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(128, "XIRQ0", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(128, "XIRQ0", 0,
111, UNIPHIER_PIN_DRV_4_8,
111, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(129, "XIRQ1", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(129, "XIRQ1", 0,
112, UNIPHIER_PIN_DRV_4_8,
112, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(130, "XIRQ2", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(130, "XIRQ2", 0,
113, UNIPHIER_PIN_DRV_4_8,
113, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(131, "XIRQ3", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(131, "XIRQ3", 0,
114, UNIPHIER_PIN_DRV_4_8,
114, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(132, "XIRQ4", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(132, "XIRQ4", 0,
115, UNIPHIER_PIN_DRV_4_8,
115, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(133, "XIRQ5", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(133, "XIRQ5", 0,
116, UNIPHIER_PIN_DRV_4_8,
116, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(134, "XIRQ6", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(134, "XIRQ6", 0,
117, UNIPHIER_PIN_DRV_4_8,
117, UNIPHIER_PIN_PULL_DOWN),
- UNIPHIER_PINCTRL_PIN(135, "XIRQ7", UNIPHIER_PIN_IECTRL_NONE,
+ UNIPHIER_PINCTRL_PIN(135, "XIRQ7", 0,
118, UNIPHIER_PIN_DRV_4_8,
118, UNIPHIER_PIN_PULL_DOWN),
};
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
static bool force;
module_param(force, bool, 0);
#include <asm/processor.h>
#include "intel_ips.h"
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
result = lv1_stop_lpm(lpm_priv->lpm_id, &tmp);
if (result) {
- if(result != LV1_WRONG_STATE)
+ if (result != LV1_WRONG_STATE)
dev_err(sbd_core(), "%s:%u: lv1_stop_lpm failed: %s\n",
__func__, __LINE__, ps3_result(result));
return;
dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
drv = ps3_system_bus_dev_to_vuart_drv(dev);
+ BUG_ON(!drv);
dev_dbg(&dev->core, "%s:%d: (%s)\n", __func__, __LINE__,
drv->core.core.name);
- BUG_ON(!drv);
-
if (dev->port_number >= PORT_COUNT) {
BUG();
return -EINVAL;
*/
if (i == 5) {
i = slowclk;
- rate = 32768;
+ rate = clk_get_rate(tc->slow_clk);
min = div_u64(NSEC_PER_SEC, rate);
max = min << tc->tcb_config->counter_width;
tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
if (tcbpwm == NULL) {
- atmel_tc_free(tc);
+ err = -ENOMEM;
dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
+ goto err_free_tc;
}
tcbpwm->chip.dev = &pdev->dev;
tcbpwm->chip.npwm = NPWM;
tcbpwm->tc = tc;
+ err = clk_prepare_enable(tc->slow_clk);
+ if (err)
+ goto err_free_tc;
+
spin_lock_init(&tcbpwm->lock);
err = pwmchip_add(&tcbpwm->chip);
- if (err < 0) {
- atmel_tc_free(tc);
- return err;
- }
+ if (err < 0)
+ goto err_disable_clk;
platform_set_drvdata(pdev, tcbpwm);
return 0;
+
+err_disable_clk:
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
+err_free_tc:
+ atmel_tc_free(tc);
+
+ return err;
}
static int atmel_tcb_pwm_remove(struct platform_device *pdev)
struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
int err;
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
err = pwmchip_remove(&tcbpwm->chip);
if (err < 0)
return err;
} else {
max = block->base->discipline->max_blocks << block->s2b_shift;
}
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, block->request_queue);
blk_queue_logical_block_size(block->request_queue,
block->bp_block);
blk_queue_max_hw_sectors(block->request_queue, max);
* were waiting for the flush
*/
if (device == list_first_entry(&active,
- struct dasd_device, alias_list))
+ struct dasd_device, alias_list)) {
list_move(&device->alias_list, &lcu->active_devices);
+ private = (struct dasd_eckd_private *) device->private;
+ private->pavgroup = NULL;
+ }
}
spin_unlock_irqrestore(&lcu->lock, flags);
}
#include <asm/dasd.h>
#include <asm/debug.h>
+#include <asm/diag.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <asm/irq.h>
int rc;
rc = 3;
+ diag_stat_inc(DIAG_STAT_X250);
asm volatile(
" diag 2,%2,0x250\n"
"0: ipm %0\n"
path_data->opm |= lpm;
continue; /* no error */
}
- /* translate path mask to position in mask */
- pos = 8 - ffs(lpm);
+ pos = pathmask_to_pos(lpm);
kfree(private->path_conf_data[pos]);
if ((__u8 *)private->path_conf_data[pos] ==
private->conf_data) {
return conf_data;
}
out:
- return private->path_conf_data[8 - ffs(lpum)];
+ return private->path_conf_data[pathmask_to_pos(lpum)];
}
/*
for (path = 0x80; path; path >>= 1) {
/* initialise data per path */
bitmask = mask;
- pos = 8 - ffs(path);
+ pos = pathmask_to_pos(path);
conf_data = private->path_conf_data[pos];
pos = 8 - ffs(cuir->ned_map);
ned = (char *) &conf_data->neds[pos];
((u64 *)cuir)[0], ((u64 *)cuir)[1], ((u64 *)cuir)[2],
((u32 *)cuir)[3]);
ccw_device_get_schid(device->cdev, &sch_id);
- /* get position of path in mask */
- pos = 8 - ffs(lpum);
- /* get channel path descriptor from this position */
+ pos = pathmask_to_pos(lpum);
desc = ccw_device_get_chp_desc(device->cdev, pos);
if (cuir->code == CUIR_QUIESCE) {
#include <linux/wait.h>
#include <linux/string.h>
#include <asm/ctl_reg.h>
+#include <asm/diag.h>
#include "hmcdrv_ftp.h"
#include "diag_ftp.h"
{
int rc;
+ diag_stat_inc(DIAG_STAT_X2C4);
asm volatile(
" diag %[addr],%[cmd],0x2c4\n"
"0: j 2f\n"
sclp_make_buffer(void *page, unsigned short columns, unsigned short htab)
{
struct sclp_buffer *buffer;
- struct write_sccb *sccb;
+ struct sccb_header *sccb;
- sccb = (struct write_sccb *) page;
+ sccb = (struct sccb_header *) page;
/*
* We keep the struct sclp_buffer structure at the end
* of the sccb page.
buffer = ((struct sclp_buffer *) ((addr_t) sccb + PAGE_SIZE)) - 1;
buffer->sccb = sccb;
buffer->retry_count = 0;
- buffer->mto_number = 0;
- buffer->mto_char_sum = 0;
+ buffer->messages = 0;
+ buffer->char_sum = 0;
buffer->current_line = NULL;
buffer->current_length = 0;
buffer->columns = columns;
buffer->htab = htab;
/* initialize sccb */
- memset(sccb, 0, sizeof(struct write_sccb));
- sccb->header.length = sizeof(struct write_sccb);
- sccb->msg_buf.header.length = sizeof(struct msg_buf);
- sccb->msg_buf.header.type = EVTYP_MSG;
- sccb->msg_buf.mdb.header.length = sizeof(struct mdb);
- sccb->msg_buf.mdb.header.type = 1;
- sccb->msg_buf.mdb.header.tag = 0xD4C4C240; /* ebcdic "MDB " */
- sccb->msg_buf.mdb.header.revision_code = 1;
- sccb->msg_buf.mdb.go.length = sizeof(struct go);
- sccb->msg_buf.mdb.go.type = 1;
+ memset(sccb, 0, sizeof(struct sccb_header));
+ sccb->length = sizeof(struct sccb_header);
return buffer;
}
}
/*
- * Initialize a new Message Text Object (MTO) at the end of the provided buffer
- * with enough room for max_len characters. Return 0 on success.
+ * Initialize a new message the end of the provided buffer with
+ * enough room for max_len characters. Return 0 on success.
*/
static int
sclp_initialize_mto(struct sclp_buffer *buffer, int max_len)
{
- struct write_sccb *sccb;
+ struct sccb_header *sccb;
+ struct msg_buf *msg;
+ struct mdb *mdb;
+ struct go *go;
struct mto *mto;
- int mto_size;
+ int msg_size;
- /* max size of new Message Text Object including message text */
- mto_size = sizeof(struct mto) + max_len;
+ /* max size of new message including message text */
+ msg_size = sizeof(struct msg_buf) + max_len;
/* check if current buffer sccb can contain the mto */
sccb = buffer->sccb;
- if ((MAX_SCCB_ROOM - sccb->header.length) < mto_size)
+ if ((MAX_SCCB_ROOM - sccb->length) < msg_size)
return -ENOMEM;
- /* find address of new message text object */
- mto = (struct mto *)(((addr_t) sccb) + sccb->header.length);
+ msg = (struct msg_buf *)((addr_t) sccb + sccb->length);
+ memset(msg, 0, sizeof(struct msg_buf));
+ msg->header.length = sizeof(struct msg_buf);
+ msg->header.type = EVTYP_MSG;
- /*
- * fill the new Message-Text Object,
- * starting behind the former last byte of the SCCB
- */
- memset(mto, 0, sizeof(struct mto));
+ mdb = &msg->mdb;
+ mdb->header.length = sizeof(struct mdb);
+ mdb->header.type = 1;
+ mdb->header.tag = 0xD4C4C240; /* ebcdic "MDB " */
+ mdb->header.revision_code = 1;
+
+ go = &mdb->go;
+ go->length = sizeof(struct go);
+ go->type = 1;
+
+ mto = &mdb->mto;
mto->length = sizeof(struct mto);
mto->type = 4; /* message text object */
mto->line_type_flags = LNTPFLGS_ENDTEXT; /* end text */
/* set pointer to first byte after struct mto. */
+ buffer->current_msg = msg;
buffer->current_line = (char *) (mto + 1);
buffer->current_length = 0;
}
/*
- * Finalize MTO initialized by sclp_initialize_mto(), updating the sizes of
- * MTO, enclosing MDB, event buffer and SCCB.
+ * Finalize message initialized by sclp_initialize_mto(),
+ * updating the sizes of MTO, enclosing MDB, event buffer and SCCB.
*/
static void
sclp_finalize_mto(struct sclp_buffer *buffer)
{
- struct write_sccb *sccb;
- struct mto *mto;
- int str_len, mto_size;
-
- str_len = buffer->current_length;
- buffer->current_line = NULL;
- buffer->current_length = 0;
-
- /* real size of new Message Text Object including message text */
- mto_size = sizeof(struct mto) + str_len;
-
- /* find address of new message text object */
- sccb = buffer->sccb;
- mto = (struct mto *)(((addr_t) sccb) + sccb->header.length);
-
- /* set size of message text object */
- mto->length = mto_size;
+ struct sccb_header *sccb;
+ struct msg_buf *msg;
/*
* update values of sizes
* (SCCB, Event(Message) Buffer, Message Data Block)
*/
- sccb->header.length += mto_size;
- sccb->msg_buf.header.length += mto_size;
- sccb->msg_buf.mdb.header.length += mto_size;
+ sccb = buffer->sccb;
+ msg = buffer->current_msg;
+ msg->header.length += buffer->current_length;
+ msg->mdb.header.length += buffer->current_length;
+ msg->mdb.mto.length += buffer->current_length;
+ sccb->length += msg->header.length;
/*
* count number of buffered messages (= number of Message Text
* Objects) and number of buffered characters
* for the SCCB currently used for buffering and at all
*/
- buffer->mto_number++;
- buffer->mto_char_sum += str_len;
+ buffer->messages++;
+ buffer->char_sum += buffer->current_length;
+
+ buffer->current_line = NULL;
+ buffer->current_length = 0;
+ buffer->current_msg = NULL;
}
/*
break;
case '\a': /* bell, one for several times */
/* set SCLP sound alarm bit in General Object */
- buffer->sccb->msg_buf.mdb.go.general_msg_flags |=
+ if (buffer->current_line == NULL) {
+ rc = sclp_initialize_mto(buffer,
+ buffer->columns);
+ if (rc)
+ return i_msg;
+ }
+ buffer->current_msg->mdb.go.general_msg_flags |=
GNRLMSGFLGS_SNDALRM;
break;
case '\t': /* horizontal tabulator */
int
sclp_buffer_space(struct sclp_buffer *buffer)
{
+ struct sccb_header *sccb;
int count;
- count = MAX_SCCB_ROOM - buffer->sccb->header.length;
+ sccb = buffer->sccb;
+ count = MAX_SCCB_ROOM - sccb->length;
if (buffer->current_line != NULL)
- count -= sizeof(struct mto) + buffer->current_length;
+ count -= sizeof(struct msg_buf) + buffer->current_length;
return count;
}
{
int count;
- count = buffer->mto_char_sum;
+ count = buffer->char_sum;
if (buffer->current_line != NULL)
count += buffer->current_length;
return count;
{
int rc;
struct sclp_buffer *buffer;
- struct write_sccb *sccb;
+ struct sccb_header *sccb;
buffer = (struct sclp_buffer *) data;
sccb = buffer->sccb;
return;
}
/* check SCLP response code and choose suitable action */
- switch (sccb->header.response_code) {
+ switch (sccb->response_code) {
case 0x0020 :
/* Normal completion, buffer processed, message(s) sent */
rc = 0;
/* remove processed buffers and requeue rest */
if (sclp_remove_processed((struct sccb_header *) sccb) > 0) {
/* not all buffers were processed */
- sccb->header.response_code = 0x0000;
+ sccb->response_code = 0x0000;
buffer->request.status = SCLP_REQ_FILLED;
rc = sclp_add_request(request);
if (rc == 0)
break;
}
/* retry request */
- sccb->header.response_code = 0x0000;
+ sccb->response_code = 0x0000;
buffer->request.status = SCLP_REQ_FILLED;
rc = sclp_add_request(request);
if (rc == 0)
return;
break;
default:
- if (sccb->header.response_code == 0x71f0)
+ if (sccb->response_code == 0x71f0)
rc = -ENOMEM;
else
rc = -EINVAL;
sclp_emit_buffer(struct sclp_buffer *buffer,
void (*callback)(struct sclp_buffer *, int))
{
- struct write_sccb *sccb;
-
/* add current line if there is one */
if (buffer->current_line != NULL)
sclp_finalize_mto(buffer);
/* Are there messages in the output buffer ? */
- if (buffer->mto_number == 0)
+ if (buffer->messages == 0)
return -EIO;
- sccb = buffer->sccb;
- /* Use normal write message */
- sccb->msg_buf.header.type = EVTYP_MSG;
-
buffer->request.command = SCLP_CMDW_WRITE_EVENT_DATA;
buffer->request.status = SCLP_REQ_FILLED;
buffer->request.callback = sclp_writedata_callback;
buffer->request.callback_data = buffer;
- buffer->request.sccb = sccb;
+ buffer->request.sccb = buffer->sccb;
buffer->callback = callback;
return sclp_add_request(&buffer->request);
}
struct mdb {
struct mdb_header header;
struct go go;
+ struct mto mto;
} __attribute__((packed));
struct msg_buf {
struct mdb mdb;
} __attribute__((packed));
-struct write_sccb {
- struct sccb_header header;
- struct msg_buf msg_buf;
-} __attribute__((packed));
-
/* The number of empty mto buffers that can be contained in a single sccb. */
-#define NR_EMPTY_MTO_PER_SCCB ((PAGE_SIZE - sizeof(struct sclp_buffer) - \
- sizeof(struct write_sccb)) / sizeof(struct mto))
+#define NR_EMPTY_MSG_PER_SCCB ((PAGE_SIZE - sizeof(struct sclp_buffer) - \
+ sizeof(struct sccb_header)) / sizeof(struct msg_buf))
/*
* data structure for information about list of SCCBs (only for writing),
struct sclp_buffer {
struct list_head list; /* list_head for sccb_info chain */
struct sclp_req request;
- struct write_sccb *sccb;
+ void *sccb;
+ struct msg_buf *current_msg;
char *current_line;
int current_length;
int retry_count;
unsigned short columns;
unsigned short htab;
/* statistics about this buffer */
- unsigned int mto_char_sum; /* # chars in sccb */
- unsigned int mto_number; /* # mtos in sccb */
+ unsigned int char_sum; /* # chars in sccb */
+ unsigned int messages; /* # messages in sccb */
/* Callback that is called after reaching final status. */
void (*callback)(struct sclp_buffer *, int);
};
* to change as output buffers get emptied, or if the output flow
* control is acted. This is not an exact number because not every
* character needs the same space in the sccb. The worst case is
- * a string of newlines. Every newlines creates a new mto which
- * needs 8 bytes.
+ * a string of newlines. Every newline creates a new message which
+ * needs 82 bytes.
*/
static int
sclp_tty_write_room (struct tty_struct *tty)
spin_lock_irqsave(&sclp_tty_lock, flags);
count = 0;
if (sclp_ttybuf != NULL)
- count = sclp_buffer_space(sclp_ttybuf) / sizeof(struct mto);
+ count = sclp_buffer_space(sclp_ttybuf) / sizeof(struct msg_buf);
list_for_each(l, &sclp_tty_pages)
- count += NR_EMPTY_MTO_PER_SCCB;
+ count += NR_EMPTY_MSG_PER_SCCB;
spin_unlock_irqrestore(&sclp_tty_lock, flags);
return count;
}
static void s390_reset_chpids_mcck_handler(void)
{
struct crw crw;
- struct mci *mci;
+ union mci mci;
/* Check for pending channel report word. */
- mci = (struct mci *)&S390_lowcore.mcck_interruption_code;
- if (!mci->cp)
+ mci.val = S390_lowcore.mcck_interruption_code;
+ if (!mci.cp)
return;
/* Process channel report words. */
while (stcrw(&crw) == 0) {
* @readall: read a measurement block in a common format
* @reset: clear the data in the associated measurement block and
* reset its time stamp
- * @align: align an allocated block so that the hardware can use it
*/
struct cmb_operations {
int (*alloc) (struct ccw_device *);
u64 (*read) (struct ccw_device *, int);
int (*readall)(struct ccw_device *, struct cmbdata *);
void (*reset) (struct ccw_device *);
- void *(*align) (void *);
/* private: */
struct attribute_group *attr_group;
};
static int set_schib(struct ccw_device *cdev, u32 mme, int mbfc,
unsigned long address)
{
- struct subchannel *sch;
-
- sch = to_subchannel(cdev->dev.parent);
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ int ret;
sch->config.mme = mme;
sch->config.mbfc = mbfc;
else
sch->config.mbi = address;
- return cio_commit_config(sch);
+ ret = cio_commit_config(sch);
+ if (!mme && ret == -ENODEV) {
+ /*
+ * The task was to disable measurement block updates but
+ * the subchannel is already gone. Report success.
+ */
+ ret = 0;
+ }
+ return ret;
}
struct set_schib_struct {
return -EBUSY;
}
cmb_data = cdev->private->cmb;
- hw_block = cmbops->align(cmb_data->hw_block);
+ hw_block = cmb_data->hw_block;
if (!memcmp(cmb_data->last_block, hw_block, cmb_data->size))
/* No need to copy. */
return 0;
* Need to reset hw block as well to make the hardware start
* from 0 again.
*/
- memset(cmbops->align(cmb_data->hw_block), 0, cmb_data->size);
+ memset(cmb_data->hw_block, 0, cmb_data->size);
cmb_data->last_update = 0;
}
cdev->private->cmb_start_time = get_tod_clock();
spin_lock_irq(cdev->ccwlock);
priv = cdev->private;
-
- if (list_empty(&priv->cmb_list)) {
- /* already freed */
- goto out;
- }
-
cmb_data = priv->cmb;
priv->cmb = NULL;
if (cmb_data)
free_pages((unsigned long)cmb_area.mem, get_order(size));
cmb_area.mem = NULL;
}
-out:
spin_unlock_irq(cdev->ccwlock);
spin_unlock(&cmb_area.lock);
}
cmf_generic_reset(cdev);
}
-static void * align_cmb(void *area)
-{
- return area;
-}
-
static struct attribute_group cmf_attr_group;
static struct cmb_operations cmbops_basic = {
.read = read_cmb,
.readall = readall_cmb,
.reset = reset_cmb,
- .align = align_cmb,
.attr_group = &cmf_attr_group,
};
u32 device_busy_time;
u32 initial_command_response_time;
u32 reserved[7];
-};
+} __packed __aligned(64);
-/*
- * kmalloc only guarantees 8 byte alignment, but we need cmbe
- * pointers to be naturally aligned. Make sure to allocate
- * enough space for two cmbes.
- */
-static inline struct cmbe *cmbe_align(struct cmbe *c)
-{
- unsigned long addr;
- addr = ((unsigned long)c + sizeof (struct cmbe) - sizeof(long)) &
- ~(sizeof (struct cmbe) - sizeof(long));
- return (struct cmbe*)addr;
-}
+static struct kmem_cache *cmbe_cache;
static int alloc_cmbe(struct ccw_device *cdev)
{
- struct cmbe *cmbe;
struct cmb_data *cmb_data;
- int ret;
+ struct cmbe *cmbe;
+ int ret = -ENOMEM;
- cmbe = kzalloc (sizeof (*cmbe) * 2, GFP_KERNEL);
+ cmbe = kmem_cache_zalloc(cmbe_cache, GFP_KERNEL);
if (!cmbe)
- return -ENOMEM;
- cmb_data = kzalloc(sizeof(struct cmb_data), GFP_KERNEL);
- if (!cmb_data) {
- ret = -ENOMEM;
+ return ret;
+
+ cmb_data = kzalloc(sizeof(*cmb_data), GFP_KERNEL);
+ if (!cmb_data)
goto out_free;
- }
+
cmb_data->last_block = kzalloc(sizeof(struct cmbe), GFP_KERNEL);
- if (!cmb_data->last_block) {
- ret = -ENOMEM;
+ if (!cmb_data->last_block)
goto out_free;
- }
- cmb_data->size = sizeof(struct cmbe);
- spin_lock_irq(cdev->ccwlock);
- if (cdev->private->cmb) {
- spin_unlock_irq(cdev->ccwlock);
- ret = -EBUSY;
- goto out_free;
- }
+
+ cmb_data->size = sizeof(*cmbe);
cmb_data->hw_block = cmbe;
+
+ spin_lock(&cmb_area.lock);
+ spin_lock_irq(cdev->ccwlock);
+ if (cdev->private->cmb)
+ goto out_unlock;
+
cdev->private->cmb = cmb_data;
- spin_unlock_irq(cdev->ccwlock);
/* activate global measurement if this is the first channel */
- spin_lock(&cmb_area.lock);
if (list_empty(&cmb_area.list))
cmf_activate(NULL, 1);
list_add_tail(&cdev->private->cmb_list, &cmb_area.list);
- spin_unlock(&cmb_area.lock);
+ spin_unlock_irq(cdev->ccwlock);
+ spin_unlock(&cmb_area.lock);
return 0;
+
+out_unlock:
+ spin_unlock_irq(cdev->ccwlock);
+ spin_unlock(&cmb_area.lock);
+ ret = -EBUSY;
out_free:
if (cmb_data)
kfree(cmb_data->last_block);
kfree(cmb_data);
- kfree(cmbe);
+ kmem_cache_free(cmbe_cache, cmbe);
+
return ret;
}
{
struct cmb_data *cmb_data;
+ spin_lock(&cmb_area.lock);
spin_lock_irq(cdev->ccwlock);
cmb_data = cdev->private->cmb;
cdev->private->cmb = NULL;
- if (cmb_data)
+ if (cmb_data) {
kfree(cmb_data->last_block);
+ kmem_cache_free(cmbe_cache, cmb_data->hw_block);
+ }
kfree(cmb_data);
- spin_unlock_irq(cdev->ccwlock);
/* deactivate global measurement if this is the last channel */
- spin_lock(&cmb_area.lock);
list_del_init(&cdev->private->cmb_list);
if (list_empty(&cmb_area.list))
cmf_activate(NULL, 0);
+ spin_unlock_irq(cdev->ccwlock);
spin_unlock(&cmb_area.lock);
}
return -EINVAL;
}
cmb_data = cdev->private->cmb;
- mba = mme ? (unsigned long) cmbe_align(cmb_data->hw_block) : 0;
+ mba = mme ? (unsigned long) cmb_data->hw_block : 0;
spin_unlock_irqrestore(cdev->ccwlock, flags);
return set_schib_wait(cdev, mme, 1, mba);
cmf_generic_reset(cdev);
}
-static void * align_cmbe(void *area)
-{
- return cmbe_align(area);
-}
-
static struct attribute_group cmf_attr_group_ext;
static struct cmb_operations cmbops_extended = {
.read = read_cmbe,
.readall = readall_cmbe,
.reset = reset_cmbe,
- .align = align_cmbe,
.attr_group = &cmf_attr_group_ext,
};
struct device_attribute *attr,
char *buf)
{
- return sprintf(buf, "%d\n", to_ccwdev(dev)->private->cmb ? 1 : 0);
+ struct ccw_device *cdev = to_ccwdev(dev);
+ int enabled;
+
+ spin_lock_irq(cdev->ccwlock);
+ enabled = !!cdev->private->cmb;
+ spin_unlock_irq(cdev->ccwlock);
+
+ return sprintf(buf, "%d\n", enabled);
}
static ssize_t cmb_enable_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t c)
{
- struct ccw_device *cdev;
- int ret;
+ struct ccw_device *cdev = to_ccwdev(dev);
unsigned long val;
+ int ret;
ret = kstrtoul(buf, 16, &val);
if (ret)
return ret;
- cdev = to_ccwdev(dev);
-
switch (val) {
case 0:
ret = disable_cmf(cdev);
case 1:
ret = enable_cmf(cdev);
break;
+ default:
+ ret = -EINVAL;
}
- return c;
+ return ret ? ret : c;
}
-
-DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
+DEVICE_ATTR_RW(cmb_enable);
int ccw_set_cmf(struct ccw_device *cdev, int enable)
{
{
int ret;
+ device_lock(&cdev->dev);
+ get_device(&cdev->dev);
ret = cmbops->alloc(cdev);
- cmbops->reset(cdev);
if (ret)
- return ret;
+ goto out;
+ cmbops->reset(cdev);
+ ret = sysfs_create_group(&cdev->dev.kobj, cmbops->attr_group);
+ if (ret) {
+ cmbops->free(cdev);
+ goto out;
+ }
ret = cmbops->set(cdev, 2);
if (ret) {
+ sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group);
cmbops->free(cdev);
- return ret;
}
- ret = sysfs_create_group(&cdev->dev.kobj, cmbops->attr_group);
- if (!ret)
- return 0;
- cmbops->set(cdev, 0); //FIXME: this can fail
- cmbops->free(cdev);
+out:
+ if (ret)
+ put_device(&cdev->dev);
+
+ device_unlock(&cdev->dev);
return ret;
}
/**
- * disable_cmf() - switch off the channel measurement for a specific device
+ * __disable_cmf() - switch off the channel measurement for a specific device
* @cdev: The ccw device to be disabled
*
* Returns %0 for success or a negative error value.
*
* Context:
- * non-atomic
+ * non-atomic, device_lock() held.
*/
-int disable_cmf(struct ccw_device *cdev)
+int __disable_cmf(struct ccw_device *cdev)
{
int ret;
ret = cmbops->set(cdev, 0);
if (ret)
return ret;
- cmbops->free(cdev);
+
sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group);
+ cmbops->free(cdev);
+ put_device(&cdev->dev);
+
+ return ret;
+}
+
+/**
+ * disable_cmf() - switch off the channel measurement for a specific device
+ * @cdev: The ccw device to be disabled
+ *
+ * Returns %0 for success or a negative error value.
+ *
+ * Context:
+ * non-atomic
+ */
+int disable_cmf(struct ccw_device *cdev)
+{
+ int ret;
+
+ device_lock(&cdev->dev);
+ ret = __disable_cmf(cdev);
+ device_unlock(&cdev->dev);
+
return ret;
}
return cmbops->set(cdev, 2);
}
+/**
+ * cmf_reactivate() - reactivate measurement block updates
+ *
+ * Use this during resume from hibernate.
+ */
+void cmf_reactivate(void)
+{
+ spin_lock(&cmb_area.lock);
+ if (!list_empty(&cmb_area.list))
+ cmf_activate(cmb_area.mem, 1);
+ spin_unlock(&cmb_area.lock);
+}
+
+static int __init init_cmbe(void)
+{
+ cmbe_cache = kmem_cache_create("cmbe_cache", sizeof(struct cmbe),
+ __alignof__(struct cmbe), 0, NULL);
+
+ return cmbe_cache ? 0 : -ENOMEM;
+}
+
static int __init init_cmf(void)
{
char *format_string;
- char *detect_string = "parameter";
+ char *detect_string;
+ int ret;
/*
* If the user did not give a parameter, see if we are running on a
case CMF_EXTENDED:
format_string = "extended";
cmbops = &cmbops_extended;
+
+ ret = init_cmbe();
+ if (ret)
+ return ret;
break;
default:
- return 1;
+ return -EINVAL;
}
pr_info("Channel measurement facility initialized using format "
"%s (mode %s)\n", format_string, detect_string);
return 0;
}
-
module_init(init_cmf);
if (chp)
chp_update_desc(chp);
}
+ cmf_reactivate();
}
#ifdef CONFIG_PROC_FS
cdev->drv = NULL;
cdev->private->int_class = IRQIO_CIO;
spin_unlock_irq(cdev->ccwlock);
+ __disable_cmf(cdev);
+
return 0;
}
cdev = to_ccwdev(dev);
if (cdev->drv && cdev->drv->shutdown)
cdev->drv->shutdown(cdev);
- disable_cmf(cdev);
+ __disable_cmf(cdev);
}
static int ccw_device_pm_prepare(struct device *dev)
void ccw_device_disband_start(struct ccw_device *);
void ccw_device_disband_done(struct ccw_device *, int);
-void ccw_device_stlck_start(struct ccw_device *, void *, void *, void *);
-void ccw_device_stlck_done(struct ccw_device *, void *, int);
-
-int ccw_device_call_handler(struct ccw_device *);
-
int ccw_device_stlck(struct ccw_device *);
/* Helper function for machine check handling. */
void retry_set_schib(struct ccw_device *cdev);
void cmf_retry_copy_block(struct ccw_device *);
int cmf_reenable(struct ccw_device *);
+void cmf_reactivate(void);
int ccw_set_cmf(struct ccw_device *cdev, int enable);
extern struct device_attribute dev_attr_cmb_enable;
#endif
css_schedule_eval(sch->schid);
}
+/*
+ * Pass interrupt to device driver.
+ */
+static int ccw_device_call_handler(struct ccw_device *cdev)
+{
+ unsigned int stctl;
+ int ending_status;
+
+ /*
+ * we allow for the device action handler if .
+ * - we received ending status
+ * - the action handler requested to see all interrupts
+ * - we received an intermediate status
+ * - fast notification was requested (primary status)
+ * - unsolicited interrupts
+ */
+ stctl = scsw_stctl(&cdev->private->irb.scsw);
+ ending_status = (stctl & SCSW_STCTL_SEC_STATUS) ||
+ (stctl == (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)) ||
+ (stctl == SCSW_STCTL_STATUS_PEND);
+ if (!ending_status &&
+ !cdev->private->options.repall &&
+ !(stctl & SCSW_STCTL_INTER_STATUS) &&
+ !(cdev->private->options.fast &&
+ (stctl & SCSW_STCTL_PRIM_STATUS)))
+ return 0;
+
+ if (ending_status)
+ ccw_device_set_timeout(cdev, 0);
+
+ if (cdev->handler)
+ cdev->handler(cdev, cdev->private->intparm,
+ &cdev->private->irb);
+
+ memset(&cdev->private->irb, 0, sizeof(struct irb));
+ return 1;
+}
+
/*
* Got an interrupt for a normal io (state online).
*/
return cio_resume(sch);
}
-/*
- * Pass interrupt to device driver.
- */
-int
-ccw_device_call_handler(struct ccw_device *cdev)
-{
- unsigned int stctl;
- int ending_status;
-
- /*
- * we allow for the device action handler if .
- * - we received ending status
- * - the action handler requested to see all interrupts
- * - we received an intermediate status
- * - fast notification was requested (primary status)
- * - unsolicited interrupts
- */
- stctl = scsw_stctl(&cdev->private->irb.scsw);
- ending_status = (stctl & SCSW_STCTL_SEC_STATUS) ||
- (stctl == (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)) ||
- (stctl == SCSW_STCTL_STATUS_PEND);
- if (!ending_status &&
- !cdev->private->options.repall &&
- !(stctl & SCSW_STCTL_INTER_STATUS) &&
- !(cdev->private->options.fast &&
- (stctl & SCSW_STCTL_PRIM_STATUS)))
- return 0;
-
- /* Clear pending timers for device driver initiated I/O. */
- if (ending_status)
- ccw_device_set_timeout(cdev, 0);
- /*
- * Now we are ready to call the device driver interrupt handler.
- */
- if (cdev->handler)
- cdev->handler(cdev, cdev->private->intparm,
- &cdev->private->irb);
-
- /*
- * Clear the old and now useless interrupt response block.
- */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
-
- return 1;
-}
-
/**
* ccw_device_get_ciw() - Search for CIW command in extended sense data.
* @cdev: ccw device to inspect
return sch->lpm;
}
-struct stlck_data {
- struct completion done;
- int rc;
-};
-
-void ccw_device_stlck_done(struct ccw_device *cdev, void *data, int rc)
-{
- struct stlck_data *sdata = data;
-
- sdata->rc = rc;
- complete(&sdata->done);
-}
-
-/*
- * Perform unconditional reserve + release.
- */
-int ccw_device_stlck(struct ccw_device *cdev)
-{
- struct subchannel *sch = to_subchannel(cdev->dev.parent);
- struct stlck_data data;
- u8 *buffer;
- int rc;
-
- /* Check if steal lock operation is valid for this device. */
- if (cdev->drv) {
- if (!cdev->private->options.force)
- return -EINVAL;
- }
- buffer = kzalloc(64, GFP_DMA | GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
- init_completion(&data.done);
- data.rc = -EIO;
- spin_lock_irq(sch->lock);
- rc = cio_enable_subchannel(sch, (u32) (addr_t) sch);
- if (rc)
- goto out_unlock;
- /* Perform operation. */
- cdev->private->state = DEV_STATE_STEAL_LOCK;
- ccw_device_stlck_start(cdev, &data, &buffer[0], &buffer[32]);
- spin_unlock_irq(sch->lock);
- /* Wait for operation to finish. */
- if (wait_for_completion_interruptible(&data.done)) {
- /* Got a signal. */
- spin_lock_irq(sch->lock);
- ccw_request_cancel(cdev);
- spin_unlock_irq(sch->lock);
- wait_for_completion(&data.done);
- }
- rc = data.rc;
- /* Check results. */
- spin_lock_irq(sch->lock);
- cio_disable_subchannel(sch);
- cdev->private->state = DEV_STATE_BOXED;
-out_unlock:
- spin_unlock_irq(sch->lock);
- kfree(buffer);
-
- return rc;
-}
-
/**
* chp_get_chp_desc - return newly allocated channel-path descriptor
* @cdev: device to obtain the descriptor for
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
{
struct ccw_request *req = &cdev->private->req;
struct ccw1 *cp = cdev->private->iccws;
- int i = 8 - ffs(req->lpm);
+ int i = pathmask_to_pos(req->lpm);
struct pgid *pgid = &cdev->private->pgid[i];
pgid->inf.fc = fn;
{
struct ccw_request *req = &cdev->private->req;
struct ccw1 *cp = cdev->private->iccws;
- int i = 8 - ffs(req->lpm);
+ int i = pathmask_to_pos(req->lpm);
/* Channel program setup. */
cp->cmd_code = CCW_CMD_SENSE_PGID;
ccw_request_start(cdev);
}
+struct stlck_data {
+ struct completion done;
+ int rc;
+};
+
static void stlck_build_cp(struct ccw_device *cdev, void *buf1, void *buf2)
{
struct ccw_request *req = &cdev->private->req;
static void stlck_callback(struct ccw_device *cdev, void *data, int rc)
{
- ccw_device_stlck_done(cdev, data, rc);
+ struct stlck_data *sdata = data;
+
+ sdata->rc = rc;
+ complete(&sdata->done);
}
/**
* @buf2: data pointer used in channel program
*
* Execute a channel program on @cdev to release an existing PGID reservation.
- * When finished, call ccw_device_stlck_done with a return code specifying the
- * result.
*/
-void ccw_device_stlck_start(struct ccw_device *cdev, void *data, void *buf1,
- void *buf2)
+static void ccw_device_stlck_start(struct ccw_device *cdev, void *data,
+ void *buf1, void *buf2)
{
struct subchannel *sch = to_subchannel(cdev->dev.parent);
struct ccw_request *req = &cdev->private->req;
ccw_request_start(cdev);
}
+/*
+ * Perform unconditional reserve + release.
+ */
+int ccw_device_stlck(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct stlck_data data;
+ u8 *buffer;
+ int rc;
+
+ /* Check if steal lock operation is valid for this device. */
+ if (cdev->drv) {
+ if (!cdev->private->options.force)
+ return -EINVAL;
+ }
+ buffer = kzalloc(64, GFP_DMA | GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+ init_completion(&data.done);
+ data.rc = -EIO;
+ spin_lock_irq(sch->lock);
+ rc = cio_enable_subchannel(sch, (u32) (addr_t) sch);
+ if (rc)
+ goto out_unlock;
+ /* Perform operation. */
+ cdev->private->state = DEV_STATE_STEAL_LOCK;
+ ccw_device_stlck_start(cdev, &data, &buffer[0], &buffer[32]);
+ spin_unlock_irq(sch->lock);
+ /* Wait for operation to finish. */
+ if (wait_for_completion_interruptible(&data.done)) {
+ /* Got a signal. */
+ spin_lock_irq(sch->lock);
+ ccw_request_cancel(cdev);
+ spin_unlock_irq(sch->lock);
+ wait_for_completion(&data.done);
+ }
+ rc = data.rc;
+ /* Check results. */
+ spin_lock_irq(sch->lock);
+ cio_disable_subchannel(sch);
+ cdev->private->state = DEV_STATE_BOXED;
+out_unlock:
+ spin_unlock_irq(sch->lock);
+ kfree(buffer);
+
+ return rc;
+}
#
ap-objs := ap_bus.o
-obj-$(CONFIG_ZCRYPT) += ap.o zcrypt_api.o zcrypt_pcicc.o zcrypt_pcixcc.o
-obj-$(CONFIG_ZCRYPT) += zcrypt_pcica.o zcrypt_cex2a.o zcrypt_cex4.o
+obj-$(CONFIG_ZCRYPT) += ap.o zcrypt_api.o zcrypt_pcixcc.o
+obj-$(CONFIG_ZCRYPT) += zcrypt_cex2a.o zcrypt_cex4.o
obj-$(CONFIG_ZCRYPT) += zcrypt_msgtype6.o zcrypt_msgtype50.o
#include <linux/notifier.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/suspend.h>
#include <asm/reset.h>
#include <asm/airq.h>
#include <linux/atomic.h>
#include "ap_bus.h"
-/* Some prototypes. */
-static void ap_scan_bus(struct work_struct *);
-static void ap_poll_all(unsigned long);
-static enum hrtimer_restart ap_poll_timeout(struct hrtimer *);
-static int ap_poll_thread_start(void);
-static void ap_poll_thread_stop(void);
-static void ap_request_timeout(unsigned long);
-static inline void ap_schedule_poll_timer(void);
-static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
-static int ap_device_remove(struct device *dev);
-static int ap_device_probe(struct device *dev);
-static void ap_interrupt_handler(struct airq_struct *airq);
-static void ap_reset(struct ap_device *ap_dev, unsigned long *flags);
-static void ap_config_timeout(unsigned long ptr);
-static int ap_select_domain(void);
-static void ap_query_configuration(void);
-
/*
* Module description.
*/
static LIST_HEAD(ap_device_list);
/*
- * Workqueue & timer for bus rescan.
+ * Workqueue timer for bus rescan.
*/
-static struct workqueue_struct *ap_work_queue;
static struct timer_list ap_config_timer;
static int ap_config_time = AP_CONFIG_TIME;
-static DECLARE_WORK(ap_config_work, ap_scan_bus);
+static void ap_scan_bus(struct work_struct *);
+static DECLARE_WORK(ap_scan_work, ap_scan_bus);
/*
* Tasklet & timer for AP request polling and interrupts
*/
-static DECLARE_TASKLET(ap_tasklet, ap_poll_all, 0);
+static void ap_tasklet_fn(unsigned long);
+static DECLARE_TASKLET(ap_tasklet, ap_tasklet_fn, 0);
static atomic_t ap_poll_requests = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread = NULL;
/* Suspend flag */
static int ap_suspend_flag;
+/* Maximum domain id */
+static int ap_max_domain_id;
/* Flag to check if domain was set through module parameter domain=. This is
* important when supsend and resume is done in a z/VM environment where the
* domain might change. */
static struct bus_type ap_bus_type;
/* Adapter interrupt definitions */
+static void ap_interrupt_handler(struct airq_struct *airq);
+
static int ap_airq_flag;
static struct airq_struct ap_airq = {
/**
* ap_test_queue(): Test adjunct processor queue.
* @qid: The AP queue number
- * @queue_depth: Pointer to queue depth value
- * @device_type: Pointer to device type value
+ * @info: Pointer to queue descriptor
*
* Returns AP queue status structure.
*/
static inline struct ap_queue_status
-ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type)
+ap_test_queue(ap_qid_t qid, unsigned long *info)
{
register unsigned long reg0 asm ("0") = qid;
register struct ap_queue_status reg1 asm ("1");
register unsigned long reg2 asm ("2") = 0UL;
+ if (test_facility(15))
+ reg0 |= 1UL << 23; /* set APFT T bit*/
asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */
: "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
- *device_type = (int) (reg2 >> 24);
- *queue_depth = (int) (reg2 & 0xff);
+ if (info)
+ *info = reg2;
return reg1;
}
-/**
- * ap_query_facilities(): PQAP(TAPQ) query facilities.
- * @qid: The AP queue number
- *
- * Returns content of general register 2 after the PQAP(TAPQ)
- * instruction was called.
- */
-static inline unsigned long ap_query_facilities(ap_qid_t qid)
-{
- register unsigned long reg0 asm ("0") = qid | 0x00800000UL;
- register unsigned long reg1 asm ("1");
- register unsigned long reg2 asm ("2") = 0UL;
-
- asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */
- : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
- return reg2;
-}
-
/**
* ap_reset_queue(): Reset adjunct processor queue.
* @qid: The AP queue number
return reg1_out;
}
-static inline struct ap_queue_status
-__ap_query_functions(ap_qid_t qid, unsigned int *functions)
-{
- register unsigned long reg0 asm ("0") = 0UL | qid | (1UL << 23);
- register struct ap_queue_status reg1 asm ("1") = AP_QUEUE_STATUS_INVALID;
- register unsigned long reg2 asm ("2");
-
- asm volatile(
- ".long 0xb2af0000\n" /* PQAP(TAPQ) */
- "0:\n"
- EX_TABLE(0b, 0b)
- : "+d" (reg0), "+d" (reg1), "=d" (reg2)
- :
- : "cc");
-
- *functions = (unsigned int)(reg2 >> 32);
- return reg1;
-}
-
-static inline int __ap_query_configuration(struct ap_config_info *config)
+/**
+ * ap_query_configuration(): Get AP configuration data
+ *
+ * Returns 0 on success, or -EOPNOTSUPP.
+ */
+static inline int ap_query_configuration(void)
{
register unsigned long reg0 asm ("0") = 0x04000000UL;
register unsigned long reg1 asm ("1") = -EINVAL;
- register unsigned char *reg2 asm ("2") = (unsigned char *)config;
+ register void *reg2 asm ("2") = (void *) ap_configuration;
+ if (!ap_configuration)
+ return -EOPNOTSUPP;
asm volatile(
".long 0xb2af0000\n" /* PQAP(QCI) */
"0: la %1,0\n"
}
/**
- * ap_query_functions(): Query supported functions.
- * @qid: The AP queue number
- * @functions: Pointer to functions field.
- *
- * Returns
- * 0 on success.
- * -ENODEV if queue not valid.
- * -EBUSY if device busy.
- * -EINVAL if query function is not supported
+ * ap_init_configuration(): Allocate and query configuration array.
*/
-static int ap_query_functions(ap_qid_t qid, unsigned int *functions)
+static void ap_init_configuration(void)
{
- struct ap_queue_status status;
+ if (!ap_configuration_available())
+ return;
- status = __ap_query_functions(qid, functions);
+ ap_configuration = kzalloc(sizeof(*ap_configuration), GFP_KERNEL);
+ if (!ap_configuration)
+ return;
+ if (ap_query_configuration() != 0) {
+ kfree(ap_configuration);
+ ap_configuration = NULL;
+ return;
+ }
+}
- if (ap_queue_status_invalid_test(&status))
- return -ENODEV;
+/*
+ * ap_test_config(): helper function to extract the nrth bit
+ * within the unsigned int array field.
+ */
+static inline int ap_test_config(unsigned int *field, unsigned int nr)
+{
+ return ap_test_bit((field + (nr >> 5)), (nr & 0x1f));
+}
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- return 0;
- case AP_RESPONSE_Q_NOT_AVAIL:
- case AP_RESPONSE_DECONFIGURED:
- case AP_RESPONSE_CHECKSTOPPED:
- case AP_RESPONSE_INVALID_ADDRESS:
- return -ENODEV;
- case AP_RESPONSE_RESET_IN_PROGRESS:
- case AP_RESPONSE_BUSY:
- case AP_RESPONSE_OTHERWISE_CHANGED:
- default:
- return -EBUSY;
- }
+/*
+ * ap_test_config_card_id(): Test, whether an AP card ID is configured.
+ * @id AP card ID
+ *
+ * Returns 0 if the card is not configured
+ * 1 if the card is configured or
+ * if the configuration information is not available
+ */
+static inline int ap_test_config_card_id(unsigned int id)
+{
+ if (!ap_configuration) /* QCI not supported */
+ return 1;
+ return ap_test_config(ap_configuration->apm, id);
+}
+
+/*
+ * ap_test_config_domain(): Test, whether an AP usage domain is configured.
+ * @domain AP usage domain ID
+ *
+ * Returns 0 if the usage domain is not configured
+ * 1 if the usage domain is configured or
+ * if the configuration information is not available
+ */
+static inline int ap_test_config_domain(unsigned int domain)
+{
+ if (!ap_configuration) /* QCI not supported */
+ return domain < 16;
+ return ap_test_config(ap_configuration->aqm, domain);
}
/**
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_INVALID_ADDRESS:
- return -ENODEV;
+ pr_err("Registering adapter interrupts for AP %d failed\n",
+ AP_QID_DEVICE(ap_dev->qid));
+ return -EOPNOTSUPP;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
default:
EXPORT_SYMBOL(ap_recv);
/**
- * __ap_schedule_poll_timer(): Schedule poll timer.
- *
- * Set up the timer to run the poll tasklet
+ * ap_query_queue(): Check if an AP queue is available.
+ * @qid: The AP queue number
+ * @queue_depth: Pointer to queue depth value
+ * @device_type: Pointer to device type value
+ * @facilities: Pointer to facility indicator
*/
-static inline void __ap_schedule_poll_timer(void)
+static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type,
+ unsigned int *facilities)
+{
+ struct ap_queue_status status;
+ unsigned long info;
+ int nd;
+
+ if (!ap_test_config_card_id(AP_QID_DEVICE(qid)))
+ return -ENODEV;
+
+ status = ap_test_queue(qid, &info);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ *queue_depth = (int)(info & 0xff);
+ *device_type = (int)((info >> 24) & 0xff);
+ *facilities = (unsigned int)(info >> 32);
+ /* Update maximum domain id */
+ nd = (info >> 16) & 0xff;
+ if ((info & (1UL << 57)) && nd > 0)
+ ap_max_domain_id = nd;
+ return 0;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ case AP_RESPONSE_INVALID_ADDRESS:
+ return -ENODEV;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ case AP_RESPONSE_OTHERWISE_CHANGED:
+ case AP_RESPONSE_BUSY:
+ return -EBUSY;
+ default:
+ BUG();
+ }
+}
+
+/* State machine definitions and helpers */
+
+static void ap_sm_wait(enum ap_wait wait)
{
ktime_t hr_time;
- spin_lock_bh(&ap_poll_timer_lock);
- if (!hrtimer_is_queued(&ap_poll_timer) && !ap_suspend_flag) {
- hr_time = ktime_set(0, poll_timeout);
- hrtimer_forward_now(&ap_poll_timer, hr_time);
- hrtimer_restart(&ap_poll_timer);
+ switch (wait) {
+ case AP_WAIT_AGAIN:
+ case AP_WAIT_INTERRUPT:
+ if (ap_using_interrupts())
+ break;
+ if (ap_poll_kthread) {
+ wake_up(&ap_poll_wait);
+ break;
+ }
+ /* Fall through */
+ case AP_WAIT_TIMEOUT:
+ spin_lock_bh(&ap_poll_timer_lock);
+ if (!hrtimer_is_queued(&ap_poll_timer)) {
+ hr_time = ktime_set(0, poll_timeout);
+ hrtimer_forward_now(&ap_poll_timer, hr_time);
+ hrtimer_restart(&ap_poll_timer);
+ }
+ spin_unlock_bh(&ap_poll_timer_lock);
+ break;
+ case AP_WAIT_NONE:
+ default:
+ break;
}
- spin_unlock_bh(&ap_poll_timer_lock);
+}
+
+static enum ap_wait ap_sm_nop(struct ap_device *ap_dev)
+{
+ return AP_WAIT_NONE;
}
/**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * ap_sm_recv(): Receive pending reply messages from an AP device but do
+ * not change the state of the device.
+ * @ap_dev: pointer to the AP device
*
- * Set up the timer to run the poll tasklet
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
-static inline void ap_schedule_poll_timer(void)
+static struct ap_queue_status ap_sm_recv(struct ap_device *ap_dev)
{
- if (ap_using_interrupts())
- return;
- __ap_schedule_poll_timer();
+ struct ap_queue_status status;
+ struct ap_message *ap_msg;
+
+ status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
+ ap_dev->reply->message, ap_dev->reply->length);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ atomic_dec(&ap_poll_requests);
+ ap_dev->queue_count--;
+ if (ap_dev->queue_count > 0)
+ mod_timer(&ap_dev->timeout,
+ jiffies + ap_dev->drv->request_timeout);
+ list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
+ if (ap_msg->psmid != ap_dev->reply->psmid)
+ continue;
+ list_del_init(&ap_msg->list);
+ ap_dev->pendingq_count--;
+ ap_msg->receive(ap_dev, ap_msg, ap_dev->reply);
+ break;
+ }
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (!status.queue_empty || ap_dev->queue_count <= 0)
+ break;
+ /* The card shouldn't forget requests but who knows. */
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ ap_dev->queue_count = 0;
+ list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
+ ap_dev->requestq_count += ap_dev->pendingq_count;
+ ap_dev->pendingq_count = 0;
+ break;
+ default:
+ break;
+ }
+ return status;
}
+/**
+ * ap_sm_read(): Receive pending reply messages from an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static enum ap_wait ap_sm_read(struct ap_device *ap_dev)
+{
+ struct ap_queue_status status;
+
+ status = ap_sm_recv(ap_dev);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_AGAIN;
+ ap_dev->state = AP_STATE_IDLE;
+ return AP_WAIT_NONE;
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_INTERRUPT;
+ ap_dev->state = AP_STATE_IDLE;
+ return AP_WAIT_NONE;
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
+ }
+}
/**
- * ap_query_queue(): Check if an AP queue is available.
- * @qid: The AP queue number
- * @queue_depth: Pointer to queue depth value
- * @device_type: Pointer to device type value
+ * ap_sm_write(): Send messages from the request queue to an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
-static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type)
+static enum ap_wait ap_sm_write(struct ap_device *ap_dev)
{
struct ap_queue_status status;
- int t_depth, t_device_type;
+ struct ap_message *ap_msg;
- status = ap_test_queue(qid, &t_depth, &t_device_type);
+ if (ap_dev->requestq_count <= 0)
+ return AP_WAIT_NONE;
+ /* Start the next request on the queue. */
+ ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
+ status = __ap_send(ap_dev->qid, ap_msg->psmid,
+ ap_msg->message, ap_msg->length, ap_msg->special);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
- *queue_depth = t_depth + 1;
- *device_type = t_device_type;
- return 0;
- case AP_RESPONSE_Q_NOT_AVAIL:
- case AP_RESPONSE_DECONFIGURED:
- case AP_RESPONSE_CHECKSTOPPED:
- case AP_RESPONSE_INVALID_ADDRESS:
- return -ENODEV;
+ atomic_inc(&ap_poll_requests);
+ ap_dev->queue_count++;
+ if (ap_dev->queue_count == 1)
+ mod_timer(&ap_dev->timeout,
+ jiffies + ap_dev->drv->request_timeout);
+ list_move_tail(&ap_msg->list, &ap_dev->pendingq);
+ ap_dev->requestq_count--;
+ ap_dev->pendingq_count++;
+ if (ap_dev->queue_count < ap_dev->queue_depth) {
+ ap_dev->state = AP_STATE_WORKING;
+ return AP_WAIT_AGAIN;
+ }
+ /* fall through */
+ case AP_RESPONSE_Q_FULL:
+ ap_dev->state = AP_STATE_QUEUE_FULL;
+ return AP_WAIT_INTERRUPT;
case AP_RESPONSE_RESET_IN_PROGRESS:
- case AP_RESPONSE_OTHERWISE_CHANGED:
- case AP_RESPONSE_BUSY:
- return -EBUSY;
+ ap_dev->state = AP_STATE_RESET_WAIT;
+ return AP_WAIT_TIMEOUT;
+ case AP_RESPONSE_MESSAGE_TOO_BIG:
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ list_del_init(&ap_msg->list);
+ ap_dev->requestq_count--;
+ ap_msg->rc = -EINVAL;
+ ap_msg->receive(ap_dev, ap_msg, NULL);
+ return AP_WAIT_AGAIN;
default:
- BUG();
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
}
}
/**
- * ap_init_queue(): Reset an AP queue.
+ * ap_sm_read_write(): Send and receive messages to/from an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static enum ap_wait ap_sm_read_write(struct ap_device *ap_dev)
+{
+ return min(ap_sm_read(ap_dev), ap_sm_write(ap_dev));
+}
+
+/**
+ * ap_sm_reset(): Reset an AP queue.
* @qid: The AP queue number
*
* Submit the Reset command to an AP queue.
- * Since the reset is asynchron set the state to 'RESET_IN_PROGRESS'
- * and check later via ap_poll_queue() if the reset is done.
*/
-static int ap_init_queue(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_reset(struct ap_device *ap_dev)
{
struct ap_queue_status status;
status = ap_reset_queue(ap_dev->qid);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
- ap_dev->interrupt = AP_INTR_DISABLED;
- ap_dev->reset = AP_RESET_IN_PROGRESS;
- return 0;
case AP_RESPONSE_RESET_IN_PROGRESS:
+ ap_dev->state = AP_STATE_RESET_WAIT;
+ ap_dev->interrupt = AP_INTR_DISABLED;
+ return AP_WAIT_TIMEOUT;
case AP_RESPONSE_BUSY:
- return -EBUSY;
+ return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
- return -ENODEV;
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
}
}
/**
- * ap_increase_queue_count(): Arm request timeout.
- * @ap_dev: Pointer to an AP device.
+ * ap_sm_reset_wait(): Test queue for completion of the reset operation
+ * @ap_dev: pointer to the AP device
*
- * Arm request timeout if an AP device was idle and a new request is submitted.
+ * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
-static void ap_increase_queue_count(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_reset_wait(struct ap_device *ap_dev)
{
- int timeout = ap_dev->drv->request_timeout;
+ struct ap_queue_status status;
+ unsigned long info;
+
+ if (ap_dev->queue_count > 0)
+ /* Try to read a completed message and get the status */
+ status = ap_sm_recv(ap_dev);
+ else
+ /* Get the status with TAPQ */
+ status = ap_test_queue(ap_dev->qid, &info);
- ap_dev->queue_count++;
- if (ap_dev->queue_count == 1) {
- mod_timer(&ap_dev->timeout, jiffies + timeout);
- ap_dev->reset = AP_RESET_ARMED;
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_using_interrupts() &&
+ ap_queue_enable_interruption(ap_dev,
+ ap_airq.lsi_ptr) == 0)
+ ap_dev->state = AP_STATE_SETIRQ_WAIT;
+ else
+ ap_dev->state = (ap_dev->queue_count > 0) ?
+ AP_STATE_WORKING : AP_STATE_IDLE;
+ return AP_WAIT_AGAIN;
+ case AP_RESPONSE_BUSY:
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ return AP_WAIT_TIMEOUT;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
}
}
/**
- * ap_decrease_queue_count(): Decrease queue count.
- * @ap_dev: Pointer to an AP device.
+ * ap_sm_setirq_wait(): Test queue for completion of the irq enablement
+ * @ap_dev: pointer to the AP device
*
- * If AP device is still alive, re-schedule request timeout if there are still
- * pending requests.
+ * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
-static void ap_decrease_queue_count(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_setirq_wait(struct ap_device *ap_dev)
{
- int timeout = ap_dev->drv->request_timeout;
+ struct ap_queue_status status;
+ unsigned long info;
- ap_dev->queue_count--;
if (ap_dev->queue_count > 0)
- mod_timer(&ap_dev->timeout, jiffies + timeout);
+ /* Try to read a completed message and get the status */
+ status = ap_sm_recv(ap_dev);
else
- /*
- * The timeout timer should to be disabled now - since
- * del_timer_sync() is very expensive, we just tell via the
- * reset flag to ignore the pending timeout timer.
- */
- ap_dev->reset = AP_RESET_IGNORE;
+ /* Get the status with TAPQ */
+ status = ap_test_queue(ap_dev->qid, &info);
+
+ if (status.int_enabled == 1) {
+ /* Irqs are now enabled */
+ ap_dev->interrupt = AP_INTR_ENABLED;
+ ap_dev->state = (ap_dev->queue_count > 0) ?
+ AP_STATE_WORKING : AP_STATE_IDLE;
+ }
+
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_AGAIN;
+ /* fallthrough */
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ return AP_WAIT_TIMEOUT;
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
+ }
}
/*
- * AP device related attributes.
+ * AP state machine jump table
*/
-static ssize_t ap_hwtype_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
+ [AP_STATE_RESET_START] = {
+ [AP_EVENT_POLL] = ap_sm_reset,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_RESET_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_reset_wait,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_SETIRQ_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_setirq_wait,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_IDLE] = {
+ [AP_EVENT_POLL] = ap_sm_write,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_WORKING] = {
+ [AP_EVENT_POLL] = ap_sm_read_write,
+ [AP_EVENT_TIMEOUT] = ap_sm_reset,
+ },
+ [AP_STATE_QUEUE_FULL] = {
+ [AP_EVENT_POLL] = ap_sm_read,
+ [AP_EVENT_TIMEOUT] = ap_sm_reset,
+ },
+ [AP_STATE_SUSPEND_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_read,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_BORKED] = {
+ [AP_EVENT_POLL] = ap_sm_nop,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+};
+
+static inline enum ap_wait ap_sm_event(struct ap_device *ap_dev,
+ enum ap_event event)
{
- struct ap_device *ap_dev = to_ap_dev(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->device_type);
+ return ap_jumptable[ap_dev->state][event](ap_dev);
}
-static DEVICE_ATTR(hwtype, 0444, ap_hwtype_show, NULL);
-
-static ssize_t ap_raw_hwtype_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static inline enum ap_wait ap_sm_event_loop(struct ap_device *ap_dev,
+ enum ap_event event)
{
- struct ap_device *ap_dev = to_ap_dev(dev);
+ enum ap_wait wait;
- return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->raw_hwtype);
+ while ((wait = ap_sm_event(ap_dev, event)) == AP_WAIT_AGAIN)
+ ;
+ return wait;
}
-static DEVICE_ATTR(raw_hwtype, 0444, ap_raw_hwtype_show, NULL);
-
-static ssize_t ap_depth_show(struct device *dev, struct device_attribute *attr,
+/**
+ * ap_request_timeout(): Handling of request timeouts
+ * @data: Holds the AP device.
+ *
+ * Handles request timeouts.
+ */
+static void ap_request_timeout(unsigned long data)
+{
+ struct ap_device *ap_dev = (struct ap_device *) data;
+
+ if (ap_suspend_flag)
+ return;
+ spin_lock_bh(&ap_dev->lock);
+ ap_sm_wait(ap_sm_event(ap_dev, AP_EVENT_TIMEOUT));
+ spin_unlock_bh(&ap_dev->lock);
+}
+
+/**
+ * ap_poll_timeout(): AP receive polling for finished AP requests.
+ * @unused: Unused pointer.
+ *
+ * Schedules the AP tasklet using a high resolution timer.
+ */
+static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
+{
+ if (!ap_suspend_flag)
+ tasklet_schedule(&ap_tasklet);
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ap_interrupt_handler() - Schedule ap_tasklet on interrupt
+ * @airq: pointer to adapter interrupt descriptor
+ */
+static void ap_interrupt_handler(struct airq_struct *airq)
+{
+ inc_irq_stat(IRQIO_APB);
+ if (!ap_suspend_flag)
+ tasklet_schedule(&ap_tasklet);
+}
+
+/**
+ * ap_tasklet_fn(): Tasklet to poll all AP devices.
+ * @dummy: Unused variable
+ *
+ * Poll all AP devices on the bus.
+ */
+static void ap_tasklet_fn(unsigned long dummy)
+{
+ struct ap_device *ap_dev;
+ enum ap_wait wait = AP_WAIT_NONE;
+
+ /* Reset the indicator if interrupts are used. Thus new interrupts can
+ * be received. Doing it in the beginning of the tasklet is therefor
+ * important that no requests on any AP get lost.
+ */
+ if (ap_using_interrupts())
+ xchg(ap_airq.lsi_ptr, 0);
+
+ spin_lock(&ap_device_list_lock);
+ list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock_bh(&ap_dev->lock);
+ wait = min(wait, ap_sm_event_loop(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+ }
+ spin_unlock(&ap_device_list_lock);
+ ap_sm_wait(wait);
+}
+
+/**
+ * ap_poll_thread(): Thread that polls for finished requests.
+ * @data: Unused pointer
+ *
+ * AP bus poll thread. The purpose of this thread is to poll for
+ * finished requests in a loop if there is a "free" cpu - that is
+ * a cpu that doesn't have anything better to do. The polling stops
+ * as soon as there is another task or if all messages have been
+ * delivered.
+ */
+static int ap_poll_thread(void *data)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ set_user_nice(current, MAX_NICE);
+ set_freezable();
+ while (!kthread_should_stop()) {
+ add_wait_queue(&ap_poll_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ap_suspend_flag ||
+ atomic_read(&ap_poll_requests) <= 0) {
+ schedule();
+ try_to_freeze();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ap_poll_wait, &wait);
+ if (need_resched()) {
+ schedule();
+ try_to_freeze();
+ continue;
+ }
+ ap_tasklet_fn(0);
+ } while (!kthread_should_stop());
+ return 0;
+}
+
+static int ap_poll_thread_start(void)
+{
+ int rc;
+
+ if (ap_using_interrupts() || ap_poll_kthread)
+ return 0;
+ mutex_lock(&ap_poll_thread_mutex);
+ ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
+ rc = PTR_RET(ap_poll_kthread);
+ if (rc)
+ ap_poll_kthread = NULL;
+ mutex_unlock(&ap_poll_thread_mutex);
+ return rc;
+}
+
+static void ap_poll_thread_stop(void)
+{
+ if (!ap_poll_kthread)
+ return;
+ mutex_lock(&ap_poll_thread_mutex);
+ kthread_stop(ap_poll_kthread);
+ ap_poll_kthread = NULL;
+ mutex_unlock(&ap_poll_thread_mutex);
+}
+
+/**
+ * ap_queue_message(): Queue a request to an AP device.
+ * @ap_dev: The AP device to queue the message to
+ * @ap_msg: The message that is to be added
+ */
+void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ /* For asynchronous message handling a valid receive-callback
+ * is required. */
+ BUG_ON(!ap_msg->receive);
+
+ spin_lock_bh(&ap_dev->lock);
+ /* Queue the message. */
+ list_add_tail(&ap_msg->list, &ap_dev->requestq);
+ ap_dev->requestq_count++;
+ ap_dev->total_request_count++;
+ /* Send/receive as many request from the queue as possible. */
+ ap_sm_wait(ap_sm_event_loop(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_queue_message);
+
+/**
+ * ap_cancel_message(): Cancel a crypto request.
+ * @ap_dev: The AP device that has the message queued
+ * @ap_msg: The message that is to be removed
+ *
+ * Cancel a crypto request. This is done by removing the request
+ * from the device pending or request queue. Note that the
+ * request stays on the AP queue. When it finishes the message
+ * reply will be discarded because the psmid can't be found.
+ */
+void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ struct ap_message *tmp;
+
+ spin_lock_bh(&ap_dev->lock);
+ if (!list_empty(&ap_msg->list)) {
+ list_for_each_entry(tmp, &ap_dev->pendingq, list)
+ if (tmp->psmid == ap_msg->psmid) {
+ ap_dev->pendingq_count--;
+ goto found;
+ }
+ ap_dev->requestq_count--;
+found:
+ list_del_init(&ap_msg->list);
+ }
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_cancel_message);
+
+/*
+ * AP device related attributes.
+ */
+static ssize_t ap_hwtype_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->device_type);
+}
+
+static DEVICE_ATTR(hwtype, 0444, ap_hwtype_show, NULL);
+
+static ssize_t ap_raw_hwtype_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->raw_hwtype);
+}
+
+static DEVICE_ATTR(raw_hwtype, 0444, ap_raw_hwtype_show, NULL);
+
+static ssize_t ap_depth_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ap_device *ap_dev = to_ap_dev(dev);
int rc = 0;
spin_lock_bh(&ap_dev->lock);
- switch (ap_dev->reset) {
- case AP_RESET_IGNORE:
- rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
+ switch (ap_dev->state) {
+ case AP_STATE_RESET_START:
+ case AP_STATE_RESET_WAIT:
+ rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
break;
- case AP_RESET_ARMED:
+ case AP_STATE_WORKING:
+ case AP_STATE_QUEUE_FULL:
rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
break;
- case AP_RESET_DO:
- rc = snprintf(buf, PAGE_SIZE, "Reset Timer expired.\n");
- break;
- case AP_RESET_IN_PROGRESS:
- rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
- break;
default:
- break;
+ rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
}
spin_unlock_bh(&ap_dev->lock);
return rc;
int rc = 0;
spin_lock_bh(&ap_dev->lock);
- switch (ap_dev->interrupt) {
- case AP_INTR_DISABLED:
- rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
- break;
- case AP_INTR_ENABLED:
- rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
- break;
- case AP_INTR_IN_PROGRESS:
+ if (ap_dev->state == AP_STATE_SETIRQ_WAIT)
rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
- break;
- }
+ else if (ap_dev->interrupt == AP_INTR_ENABLED)
+ rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
+ else
+ rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
spin_unlock_bh(&ap_dev->lock);
return rc;
}
return retval;
}
-static int ap_bus_suspend(struct device *dev, pm_message_t state)
+static int ap_dev_suspend(struct device *dev, pm_message_t state)
{
struct ap_device *ap_dev = to_ap_dev(dev);
- unsigned long flags;
-
- if (!ap_suspend_flag) {
- ap_suspend_flag = 1;
-
- /* Disable scanning for devices, thus we do not want to scan
- * for them after removing.
- */
- del_timer_sync(&ap_config_timer);
- if (ap_work_queue != NULL) {
- destroy_workqueue(ap_work_queue);
- ap_work_queue = NULL;
- }
- tasklet_disable(&ap_tasklet);
- }
/* Poll on the device until all requests are finished. */
- do {
- flags = 0;
- spin_lock_bh(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock_bh(&ap_dev->lock);
- } while ((flags & 1) || (flags & 2));
-
spin_lock_bh(&ap_dev->lock);
- ap_dev->unregistered = 1;
+ ap_dev->state = AP_STATE_SUSPEND_WAIT;
+ while (ap_sm_event(ap_dev, AP_EVENT_POLL) != AP_WAIT_NONE)
+ ;
+ ap_dev->state = AP_STATE_BORKED;
spin_unlock_bh(&ap_dev->lock);
+ return 0;
+}
+static int ap_dev_resume(struct device *dev)
+{
return 0;
}
-static int ap_bus_resume(struct device *dev)
+static void ap_bus_suspend(void)
+{
+ ap_suspend_flag = 1;
+ /*
+ * Disable scanning for devices, thus we do not want to scan
+ * for them after removing.
+ */
+ flush_work(&ap_scan_work);
+ tasklet_disable(&ap_tasklet);
+}
+
+static int __ap_devices_unregister(struct device *dev, void *dummy)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static void ap_bus_resume(void)
{
- struct ap_device *ap_dev = to_ap_dev(dev);
int rc;
- if (ap_suspend_flag) {
- ap_suspend_flag = 0;
- if (ap_interrupts_available()) {
- if (!ap_using_interrupts()) {
- rc = register_adapter_interrupt(&ap_airq);
- ap_airq_flag = (rc == 0);
- }
- } else {
- if (ap_using_interrupts()) {
- unregister_adapter_interrupt(&ap_airq);
- ap_airq_flag = 0;
- }
- }
- ap_query_configuration();
- if (!user_set_domain) {
- ap_domain_index = -1;
- ap_select_domain();
- }
- init_timer(&ap_config_timer);
- ap_config_timer.function = ap_config_timeout;
- ap_config_timer.data = 0;
- ap_config_timer.expires = jiffies + ap_config_time * HZ;
- add_timer(&ap_config_timer);
- ap_work_queue = create_singlethread_workqueue("kapwork");
- if (!ap_work_queue)
- return -ENOMEM;
- tasklet_enable(&ap_tasklet);
- if (!ap_using_interrupts())
- ap_schedule_poll_timer();
- else
- tasklet_schedule(&ap_tasklet);
- if (ap_thread_flag)
- rc = ap_poll_thread_start();
- else
- rc = 0;
- } else
- rc = 0;
- if (AP_QID_QUEUE(ap_dev->qid) != ap_domain_index) {
- spin_lock_bh(&ap_dev->lock);
- ap_dev->qid = AP_MKQID(AP_QID_DEVICE(ap_dev->qid),
- ap_domain_index);
- spin_unlock_bh(&ap_dev->lock);
+ /* Unconditionally remove all AP devices */
+ bus_for_each_dev(&ap_bus_type, NULL, NULL, __ap_devices_unregister);
+ /* Reset thin interrupt setting */
+ if (ap_interrupts_available() && !ap_using_interrupts()) {
+ rc = register_adapter_interrupt(&ap_airq);
+ ap_airq_flag = (rc == 0);
}
- queue_work(ap_work_queue, &ap_config_work);
+ if (!ap_interrupts_available() && ap_using_interrupts()) {
+ unregister_adapter_interrupt(&ap_airq);
+ ap_airq_flag = 0;
+ }
+ /* Reset domain */
+ if (!user_set_domain)
+ ap_domain_index = -1;
+ /* Get things going again */
+ ap_suspend_flag = 0;
+ if (ap_airq_flag)
+ xchg(ap_airq.lsi_ptr, 0);
+ tasklet_enable(&ap_tasklet);
+ queue_work(system_long_wq, &ap_scan_work);
+}
- return rc;
+static int ap_power_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ switch (event) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ ap_bus_suspend();
+ break;
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ ap_bus_resume();
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
}
+static struct notifier_block ap_power_notifier = {
+ .notifier_call = ap_power_event,
+};
static struct bus_type ap_bus_type = {
.name = "ap",
.match = &ap_bus_match,
.uevent = &ap_uevent,
- .suspend = ap_bus_suspend,
- .resume = ap_bus_resume
+ .suspend = ap_dev_suspend,
+ .resume = ap_dev_resume,
};
static int ap_device_probe(struct device *dev)
int rc;
ap_dev->drv = ap_drv;
-
- spin_lock_bh(&ap_device_list_lock);
- list_add(&ap_dev->list, &ap_device_list);
- spin_unlock_bh(&ap_device_list_lock);
-
rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
- if (rc) {
- spin_lock_bh(&ap_device_list_lock);
- list_del_init(&ap_dev->list);
- spin_unlock_bh(&ap_device_list_lock);
- } else {
- if (ap_dev->reset == AP_RESET_IN_PROGRESS ||
- ap_dev->interrupt == AP_INTR_IN_PROGRESS)
- __ap_schedule_poll_timer();
- }
+ if (rc)
+ ap_dev->drv = NULL;
return rc;
}
list_for_each_entry_safe(ap_msg, next, &ap_dev->pendingq, list) {
list_del_init(&ap_msg->list);
ap_dev->pendingq_count--;
- ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ ap_msg->rc = -EAGAIN;
+ ap_msg->receive(ap_dev, ap_msg, NULL);
}
list_for_each_entry_safe(ap_msg, next, &ap_dev->requestq, list) {
list_del_init(&ap_msg->list);
ap_dev->requestq_count--;
- ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ ap_msg->rc = -EAGAIN;
+ ap_msg->receive(ap_dev, ap_msg, NULL);
}
}
return 0;
}
+static void ap_device_release(struct device *dev)
+{
+ kfree(to_ap_dev(dev));
+}
+
int ap_driver_register(struct ap_driver *ap_drv, struct module *owner,
char *name)
{
void ap_bus_force_rescan(void)
{
- /* reconfigure the AP bus rescan timer. */
- mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
+ if (ap_suspend_flag)
+ return;
/* processing a asynchronous bus rescan */
- queue_work(ap_work_queue, &ap_config_work);
- flush_work(&ap_config_work);
+ del_timer(&ap_config_timer);
+ queue_work(system_long_wq, &ap_scan_work);
+ flush_work(&ap_scan_work);
}
EXPORT_SYMBOL(ap_bus_force_rescan);
/*
- * ap_test_config(): helper function to extract the nrth bit
- * within the unsigned int array field.
+ * AP bus attributes.
*/
-static inline int ap_test_config(unsigned int *field, unsigned int nr)
+static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
{
- if (nr > 0xFFu)
- return 0;
- return ap_test_bit((field + (nr >> 5)), (nr & 0x1f));
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
}
-/*
- * ap_test_config_card_id(): Test, whether an AP card ID is configured.
- * @id AP card ID
- *
- * Returns 0 if the card is not configured
- * 1 if the card is configured or
- * if the configuration information is not available
- */
-static inline int ap_test_config_card_id(unsigned int id)
+static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);
+
+static ssize_t ap_control_domain_mask_show(struct bus_type *bus, char *buf)
{
- if (!ap_configuration)
- return 1;
- return ap_test_config(ap_configuration->apm, id);
-}
-
-/*
- * ap_test_config_domain(): Test, whether an AP usage domain is configured.
- * @domain AP usage domain ID
- *
- * Returns 0 if the usage domain is not configured
- * 1 if the usage domain is configured or
- * if the configuration information is not available
- */
-static inline int ap_test_config_domain(unsigned int domain)
-{
- if (!ap_configuration) /* QCI not supported */
- if (domain < 16)
- return 1; /* then domains 0...15 are configured */
- else
- return 0;
- else
- return ap_test_config(ap_configuration->aqm, domain);
-}
-
-/*
- * AP bus attributes.
- */
-static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
-}
-
-static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);
-
-static ssize_t ap_control_domain_mask_show(struct bus_type *bus, char *buf)
-{
- if (ap_configuration != NULL) { /* QCI not supported */
- if (test_facility(76)) { /* format 1 - 256 bit domain field */
- return snprintf(buf, PAGE_SIZE,
- "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+ if (!ap_configuration) /* QCI not supported */
+ return snprintf(buf, PAGE_SIZE, "not supported\n");
+ if (!test_facility(76))
+ /* format 0 - 16 bit domain field */
+ return snprintf(buf, PAGE_SIZE, "%08x%08x\n",
+ ap_configuration->adm[0],
+ ap_configuration->adm[1]);
+ /* format 1 - 256 bit domain field */
+ return snprintf(buf, PAGE_SIZE,
+ "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
ap_configuration->adm[0], ap_configuration->adm[1],
ap_configuration->adm[2], ap_configuration->adm[3],
ap_configuration->adm[4], ap_configuration->adm[5],
ap_configuration->adm[6], ap_configuration->adm[7]);
- } else { /* format 0 - 16 bit domain field */
- return snprintf(buf, PAGE_SIZE, "%08x%08x\n",
- ap_configuration->adm[0], ap_configuration->adm[1]);
- }
- } else {
- return snprintf(buf, PAGE_SIZE, "not supported\n");
- }
}
static BUS_ATTR(ap_control_domain_mask, 0444,
if (sscanf(buf, "%d\n", &time) != 1 || time < 5 || time > 120)
return -EINVAL;
ap_config_time = time;
- if (!timer_pending(&ap_config_timer) ||
- !mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ)) {
- ap_config_timer.expires = jiffies + ap_config_time * HZ;
- add_timer(&ap_config_timer);
- }
+ mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
return count;
}
if (flag) {
rc = ap_poll_thread_start();
if (rc)
- return rc;
- }
- else
+ count = rc;
+ } else
ap_poll_thread_stop();
return count;
}
static ssize_t ap_max_domain_id_show(struct bus_type *bus, char *buf)
{
- ap_qid_t qid;
- int i, nd, max_domain_id = -1;
- unsigned long fbits;
-
- if (ap_configuration) {
- if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS) {
- for (i = 0; i < AP_DEVICES; i++) {
- if (!ap_test_config_card_id(i))
- continue;
- qid = AP_MKQID(i, ap_domain_index);
- fbits = ap_query_facilities(qid);
- if (fbits & (1UL << 57)) {
- /* the N bit is 0, Nd field is filled */
- nd = (int)((fbits & 0x00FF0000UL)>>16);
- if (nd > 0)
- max_domain_id = nd;
- else
- max_domain_id = 15;
- } else {
- /* N bit is 1, max 16 domains */
- max_domain_id = 15;
- }
- break;
- }
- }
- } else {
- /* no APXA support, older machines with max 16 domains */
+ int max_domain_id;
+
+ if (ap_configuration)
+ max_domain_id = ap_max_domain_id ? : -1;
+ else
max_domain_id = 15;
- }
return snprintf(buf, PAGE_SIZE, "%d\n", max_domain_id);
}
NULL,
};
-/**
- * ap_query_configuration(): Query AP configuration information.
- *
- * Query information of installed cards and configured domains from AP.
- */
-static void ap_query_configuration(void)
-{
- if (ap_configuration_available()) {
- if (!ap_configuration)
- ap_configuration =
- kzalloc(sizeof(struct ap_config_info),
- GFP_KERNEL);
- if (ap_configuration)
- __ap_query_configuration(ap_configuration);
- } else
- ap_configuration = NULL;
-}
-
/**
* ap_select_domain(): Select an AP domain.
*
*/
static int ap_select_domain(void)
{
- int queue_depth, device_type, count, max_count, best_domain;
- ap_qid_t qid;
- int rc, i, j;
-
- /* IF APXA isn't installed, only 16 domains could be defined */
- if (!ap_configuration->ap_extended && (ap_domain_index > 15))
- return -EINVAL;
+ int count, max_count, best_domain;
+ struct ap_queue_status status;
+ int i, j;
/*
* We want to use a single domain. Either the one specified with
* the "domain=" parameter or the domain with the maximum number
* of devices.
*/
- if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS)
+ if (ap_domain_index >= 0)
/* Domain has already been selected. */
return 0;
best_domain = -1;
for (j = 0; j < AP_DEVICES; j++) {
if (!ap_test_config_card_id(j))
continue;
- qid = AP_MKQID(j, i);
- rc = ap_query_queue(qid, &queue_depth, &device_type);
- if (rc)
+ status = ap_test_queue(AP_MKQID(j, i), NULL);
+ if (status.response_code != AP_RESPONSE_NORMAL)
continue;
count++;
}
return -ENODEV;
}
-/**
- * ap_probe_device_type(): Find the device type of an AP.
- * @ap_dev: pointer to the AP device.
- *
- * Find the device type if query queue returned a device type of 0.
- */
-static int ap_probe_device_type(struct ap_device *ap_dev)
-{
- static unsigned char msg[] = {
- 0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x01,0x00,0x43,0x43,0x41,0x2d,0x41,0x50,
- 0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,
- 0x00,0x00,0x00,0x00,0x50,0x4b,0x00,0x00,
- 0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x54,0x32,0x01,0x00,0xa0,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0xb8,0x05,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,
- 0x49,0x43,0x53,0x46,0x20,0x20,0x20,0x20,
- 0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,
- 0x2d,0x31,0x2e,0x32,0x37,0x00,0x11,0x22,
- 0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
- 0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,
- 0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,
- 0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,
- 0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,
- 0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
- 0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,
- 0x88,0x1e,0x00,0x00,0x57,0x00,0x00,0x00,
- 0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,
- 0x03,0x02,0x00,0x00,0x40,0x01,0x00,0x01,
- 0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,
- 0xf6,0xd2,0x7b,0x58,0x4b,0xf9,0x28,0x68,
- 0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,
- 0x63,0x42,0xef,0xf8,0xfd,0xa4,0xf8,0xb0,
- 0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,
- 0x53,0x8c,0x6f,0x4e,0x72,0x8f,0x6c,0x04,
- 0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,
- 0xf7,0xdd,0xfd,0x4f,0x11,0x36,0x95,0x5d,
- };
- struct ap_queue_status status;
- unsigned long long psmid;
- char *reply;
- int rc, i;
-
- reply = (void *) get_zeroed_page(GFP_KERNEL);
- if (!reply) {
- rc = -ENOMEM;
- goto out;
- }
-
- status = __ap_send(ap_dev->qid, 0x0102030405060708ULL,
- msg, sizeof(msg), 0);
- if (status.response_code != AP_RESPONSE_NORMAL) {
- rc = -ENODEV;
- goto out_free;
- }
-
- /* Wait for the test message to complete. */
- for (i = 0; i < 6; i++) {
- msleep(300);
- status = __ap_recv(ap_dev->qid, &psmid, reply, 4096);
- if (status.response_code == AP_RESPONSE_NORMAL &&
- psmid == 0x0102030405060708ULL)
- break;
- }
- if (i < 6) {
- /* Got an answer. */
- if (reply[0] == 0x00 && reply[1] == 0x86)
- ap_dev->device_type = AP_DEVICE_TYPE_PCICC;
- else
- ap_dev->device_type = AP_DEVICE_TYPE_PCICA;
- rc = 0;
- } else
- rc = -ENODEV;
-
-out_free:
- free_page((unsigned long) reply);
-out:
- return rc;
-}
-
-static void ap_interrupt_handler(struct airq_struct *airq)
-{
- inc_irq_stat(IRQIO_APB);
- tasklet_schedule(&ap_tasklet);
-}
-
/**
* __ap_scan_bus(): Scan the AP bus.
* @dev: Pointer to device
return to_ap_dev(dev)->qid == (ap_qid_t)(unsigned long) data;
}
-static void ap_device_release(struct device *dev)
-{
- struct ap_device *ap_dev = to_ap_dev(dev);
-
- kfree(ap_dev);
-}
-
static void ap_scan_bus(struct work_struct *unused)
{
struct ap_device *ap_dev;
struct device *dev;
ap_qid_t qid;
int queue_depth = 0, device_type = 0;
- unsigned int device_functions;
- int rc, i;
+ unsigned int device_functions = 0;
+ int rc, i, borked;
ap_query_configuration();
- if (ap_select_domain() != 0) {
- return;
- }
+ if (ap_select_domain() != 0)
+ goto out;
+
for (i = 0; i < AP_DEVICES; i++) {
qid = AP_MKQID(i, ap_domain_index);
dev = bus_find_device(&ap_bus_type, NULL,
(void *)(unsigned long)qid,
__ap_scan_bus);
- if (ap_test_config_card_id(i))
- rc = ap_query_queue(qid, &queue_depth, &device_type);
- else
- rc = -ENODEV;
+ rc = ap_query_queue(qid, &queue_depth, &device_type,
+ &device_functions);
if (dev) {
ap_dev = to_ap_dev(dev);
spin_lock_bh(&ap_dev->lock);
- if (rc == -ENODEV || ap_dev->unregistered) {
- spin_unlock_bh(&ap_dev->lock);
- if (ap_dev->unregistered)
- i--;
- device_unregister(dev);
- put_device(dev);
- continue;
- }
+ if (rc == -ENODEV)
+ ap_dev->state = AP_STATE_BORKED;
+ borked = ap_dev->state == AP_STATE_BORKED;
spin_unlock_bh(&ap_dev->lock);
+ if (borked) /* Remove broken device */
+ device_unregister(dev);
put_device(dev);
- continue;
+ if (!borked)
+ continue;
}
if (rc)
continue;
if (!ap_dev)
break;
ap_dev->qid = qid;
- rc = ap_init_queue(ap_dev);
- if ((rc != 0) && (rc != -EBUSY)) {
- kfree(ap_dev);
- continue;
- }
+ ap_dev->state = AP_STATE_RESET_START;
+ ap_dev->interrupt = AP_INTR_DISABLED;
ap_dev->queue_depth = queue_depth;
- ap_dev->unregistered = 1;
+ ap_dev->raw_hwtype = device_type;
+ ap_dev->device_type = device_type;
+ ap_dev->functions = device_functions;
spin_lock_init(&ap_dev->lock);
INIT_LIST_HEAD(&ap_dev->pendingq);
INIT_LIST_HEAD(&ap_dev->requestq);
INIT_LIST_HEAD(&ap_dev->list);
setup_timer(&ap_dev->timeout, ap_request_timeout,
(unsigned long) ap_dev);
- switch (device_type) {
- case 0:
- /* device type probing for old cards */
- if (ap_probe_device_type(ap_dev)) {
- kfree(ap_dev);
- continue;
- }
- break;
- default:
- ap_dev->device_type = device_type;
- }
- ap_dev->raw_hwtype = device_type;
-
- rc = ap_query_functions(qid, &device_functions);
- if (!rc)
- ap_dev->functions = device_functions;
- else
- ap_dev->functions = 0u;
ap_dev->device.bus = &ap_bus_type;
ap_dev->device.parent = ap_root_device;
- if (dev_set_name(&ap_dev->device, "card%02x",
- AP_QID_DEVICE(ap_dev->qid))) {
+ rc = dev_set_name(&ap_dev->device, "card%02x",
+ AP_QID_DEVICE(ap_dev->qid));
+ if (rc) {
kfree(ap_dev);
continue;
}
+ /* Add to list of devices */
+ spin_lock_bh(&ap_device_list_lock);
+ list_add(&ap_dev->list, &ap_device_list);
+ spin_unlock_bh(&ap_device_list_lock);
+ /* Start with a device reset */
+ spin_lock_bh(&ap_dev->lock);
+ ap_sm_wait(ap_sm_event(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+ /* Register device */
ap_dev->device.release = ap_device_release;
rc = device_register(&ap_dev->device);
if (rc) {
+ spin_lock_bh(&ap_dev->lock);
+ list_del_init(&ap_dev->list);
+ spin_unlock_bh(&ap_dev->lock);
put_device(&ap_dev->device);
continue;
}
/* Add device attributes. */
rc = sysfs_create_group(&ap_dev->device.kobj,
&ap_dev_attr_group);
- if (!rc) {
- spin_lock_bh(&ap_dev->lock);
- ap_dev->unregistered = 0;
- spin_unlock_bh(&ap_dev->lock);
- }
- else
+ if (rc) {
device_unregister(&ap_dev->device);
- }
-}
-
-static void
-ap_config_timeout(unsigned long ptr)
-{
- queue_work(ap_work_queue, &ap_config_work);
- ap_config_timer.expires = jiffies + ap_config_time * HZ;
- add_timer(&ap_config_timer);
-}
-
-/**
- * ap_poll_read(): Receive pending reply messages from an AP device.
- * @ap_dev: pointer to the AP device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Returns 0 if the device is still present, -ENODEV if not.
- */
-static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
-{
- struct ap_queue_status status;
- struct ap_message *ap_msg;
-
- if (ap_dev->queue_count <= 0)
- return 0;
- status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
- ap_dev->reply->message, ap_dev->reply->length);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- ap_dev->interrupt = status.int_enabled;
- atomic_dec(&ap_poll_requests);
- ap_decrease_queue_count(ap_dev);
- list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
- if (ap_msg->psmid != ap_dev->reply->psmid)
- continue;
- list_del_init(&ap_msg->list);
- ap_dev->pendingq_count--;
- ap_msg->receive(ap_dev, ap_msg, ap_dev->reply);
- break;
- }
- if (ap_dev->queue_count > 0)
- *flags |= 1;
- break;
- case AP_RESPONSE_NO_PENDING_REPLY:
- ap_dev->interrupt = status.int_enabled;
- if (status.queue_empty) {
- /* The card shouldn't forget requests but who knows. */
- atomic_sub(ap_dev->queue_count, &ap_poll_requests);
- ap_dev->queue_count = 0;
- list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
- ap_dev->requestq_count += ap_dev->pendingq_count;
- ap_dev->pendingq_count = 0;
- } else
- *flags |= 2;
- break;
- default:
- return -ENODEV;
- }
- return 0;
-}
-
-/**
- * ap_poll_write(): Send messages from the request queue to an AP device.
- * @ap_dev: pointer to the AP device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Returns 0 if the device is still present, -ENODEV if not.
- */
-static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
-{
- struct ap_queue_status status;
- struct ap_message *ap_msg;
-
- if (ap_dev->requestq_count <= 0 ||
- (ap_dev->queue_count >= ap_dev->queue_depth) ||
- (ap_dev->reset == AP_RESET_IN_PROGRESS))
- return 0;
- /* Start the next request on the queue. */
- ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
- status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length, ap_msg->special);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- atomic_inc(&ap_poll_requests);
- ap_increase_queue_count(ap_dev);
- list_move_tail(&ap_msg->list, &ap_dev->pendingq);
- ap_dev->requestq_count--;
- ap_dev->pendingq_count++;
- if (ap_dev->queue_count < ap_dev->queue_depth &&
- ap_dev->requestq_count > 0)
- *flags |= 1;
- *flags |= 2;
- break;
- case AP_RESPONSE_RESET_IN_PROGRESS:
- __ap_schedule_poll_timer();
- case AP_RESPONSE_Q_FULL:
- *flags |= 2;
- break;
- case AP_RESPONSE_MESSAGE_TOO_BIG:
- case AP_RESPONSE_REQ_FAC_NOT_INST:
- return -EINVAL;
- default:
- return -ENODEV;
- }
- return 0;
-}
-
-/**
- * ap_poll_queue(): Poll AP device for pending replies and send new messages.
- * Check if the queue has a pending reset. In case it's done re-enable
- * interrupts, otherwise reschedule the poll_timer for another attempt.
- * @ap_dev: pointer to the bus device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Poll AP device for pending replies and send new messages. If either
- * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
- * Returns 0.
- */
-static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
-{
- int rc, depth, type;
- struct ap_queue_status status;
-
-
- if (ap_dev->reset == AP_RESET_IN_PROGRESS) {
- status = ap_test_queue(ap_dev->qid, &depth, &type);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- ap_dev->reset = AP_RESET_IGNORE;
- if (ap_using_interrupts()) {
- rc = ap_queue_enable_interruption(
- ap_dev, ap_airq.lsi_ptr);
- if (!rc)
- ap_dev->interrupt = AP_INTR_IN_PROGRESS;
- else if (rc == -ENODEV) {
- pr_err("Registering adapter interrupts for "
- "AP %d failed\n", AP_QID_DEVICE(ap_dev->qid));
- return rc;
- }
- }
- /* fall through */
- case AP_RESPONSE_BUSY:
- case AP_RESPONSE_RESET_IN_PROGRESS:
- *flags |= AP_POLL_AFTER_TIMEOUT;
- break;
- case AP_RESPONSE_Q_NOT_AVAIL:
- case AP_RESPONSE_DECONFIGURED:
- case AP_RESPONSE_CHECKSTOPPED:
- return -ENODEV;
- default:
- break;
- }
- }
-
- if ((ap_dev->reset != AP_RESET_IN_PROGRESS) &&
- (ap_dev->interrupt == AP_INTR_IN_PROGRESS)) {
- status = ap_test_queue(ap_dev->qid, &depth, &type);
- if (ap_using_interrupts()) {
- if (status.int_enabled == 1)
- ap_dev->interrupt = AP_INTR_ENABLED;
- else
- *flags |= AP_POLL_AFTER_TIMEOUT;
- } else
- ap_dev->interrupt = AP_INTR_DISABLED;
- }
-
- rc = ap_poll_read(ap_dev, flags);
- if (rc)
- return rc;
- return ap_poll_write(ap_dev, flags);
-}
-
-/**
- * __ap_queue_message(): Queue a message to a device.
- * @ap_dev: pointer to the AP device
- * @ap_msg: the message to be queued
- *
- * Queue a message to a device. Returns 0 if successful.
- */
-static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- struct ap_queue_status status;
-
- if (list_empty(&ap_dev->requestq) &&
- (ap_dev->queue_count < ap_dev->queue_depth) &&
- (ap_dev->reset != AP_RESET_IN_PROGRESS)) {
- status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length,
- ap_msg->special);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- list_add_tail(&ap_msg->list, &ap_dev->pendingq);
- atomic_inc(&ap_poll_requests);
- ap_dev->pendingq_count++;
- ap_increase_queue_count(ap_dev);
- ap_dev->total_request_count++;
- break;
- case AP_RESPONSE_Q_FULL:
- case AP_RESPONSE_RESET_IN_PROGRESS:
- list_add_tail(&ap_msg->list, &ap_dev->requestq);
- ap_dev->requestq_count++;
- ap_dev->total_request_count++;
- return -EBUSY;
- case AP_RESPONSE_REQ_FAC_NOT_INST:
- case AP_RESPONSE_MESSAGE_TOO_BIG:
- ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-EINVAL));
- return -EINVAL;
- default: /* Device is gone. */
- ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
- return -ENODEV;
- }
- } else {
- list_add_tail(&ap_msg->list, &ap_dev->requestq);
- ap_dev->requestq_count++;
- ap_dev->total_request_count++;
- return -EBUSY;
- }
- ap_schedule_poll_timer();
- return 0;
-}
-
-void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- unsigned long flags;
- int rc;
-
- /* For asynchronous message handling a valid receive-callback
- * is required. */
- BUG_ON(!ap_msg->receive);
-
- spin_lock_bh(&ap_dev->lock);
- if (!ap_dev->unregistered) {
- /* Make room on the queue by polling for finished requests. */
- rc = ap_poll_queue(ap_dev, &flags);
- if (!rc)
- rc = __ap_queue_message(ap_dev, ap_msg);
- if (!rc)
- wake_up(&ap_poll_wait);
- if (rc == -ENODEV)
- ap_dev->unregistered = 1;
- } else {
- ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
- rc = -ENODEV;
- }
- spin_unlock_bh(&ap_dev->lock);
- if (rc == -ENODEV)
- device_unregister(&ap_dev->device);
-}
-EXPORT_SYMBOL(ap_queue_message);
-
-/**
- * ap_cancel_message(): Cancel a crypto request.
- * @ap_dev: The AP device that has the message queued
- * @ap_msg: The message that is to be removed
- *
- * Cancel a crypto request. This is done by removing the request
- * from the device pending or request queue. Note that the
- * request stays on the AP queue. When it finishes the message
- * reply will be discarded because the psmid can't be found.
- */
-void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- struct ap_message *tmp;
-
- spin_lock_bh(&ap_dev->lock);
- if (!list_empty(&ap_msg->list)) {
- list_for_each_entry(tmp, &ap_dev->pendingq, list)
- if (tmp->psmid == ap_msg->psmid) {
- ap_dev->pendingq_count--;
- goto found;
- }
- ap_dev->requestq_count--;
- found:
- list_del_init(&ap_msg->list);
- }
- spin_unlock_bh(&ap_dev->lock);
-}
-EXPORT_SYMBOL(ap_cancel_message);
-
-/**
- * ap_poll_timeout(): AP receive polling for finished AP requests.
- * @unused: Unused pointer.
- *
- * Schedules the AP tasklet using a high resolution timer.
- */
-static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
-{
- tasklet_schedule(&ap_tasklet);
- return HRTIMER_NORESTART;
-}
-
-/**
- * ap_reset(): Reset a not responding AP device.
- * @ap_dev: Pointer to the AP device
- *
- * Reset a not responding AP device and move all requests from the
- * pending queue to the request queue.
- */
-static void ap_reset(struct ap_device *ap_dev, unsigned long *flags)
-{
- int rc;
-
- atomic_sub(ap_dev->queue_count, &ap_poll_requests);
- ap_dev->queue_count = 0;
- list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
- ap_dev->requestq_count += ap_dev->pendingq_count;
- ap_dev->pendingq_count = 0;
- rc = ap_init_queue(ap_dev);
- if (rc == -ENODEV)
- ap_dev->unregistered = 1;
- else
- *flags |= AP_POLL_AFTER_TIMEOUT;
-}
-
-static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
-{
- if (!ap_dev->unregistered) {
- if (ap_poll_queue(ap_dev, flags))
- ap_dev->unregistered = 1;
- if (ap_dev->reset == AP_RESET_DO)
- ap_reset(ap_dev, flags);
- }
- return 0;
-}
-
-/**
- * ap_poll_all(): Poll all AP devices.
- * @dummy: Unused variable
- *
- * Poll all AP devices on the bus in a round robin fashion. Continue
- * polling until bit 2^0 of the control flags is not set. If bit 2^1
- * of the control flags has been set arm the poll timer.
- */
-static void ap_poll_all(unsigned long dummy)
-{
- unsigned long flags;
- struct ap_device *ap_dev;
-
- /* Reset the indicator if interrupts are used. Thus new interrupts can
- * be received. Doing it in the beginning of the tasklet is therefor
- * important that no requests on any AP get lost.
- */
- if (ap_using_interrupts())
- xchg(ap_airq.lsi_ptr, 0);
- do {
- flags = 0;
- spin_lock(&ap_device_list_lock);
- list_for_each_entry(ap_dev, &ap_device_list, list) {
- spin_lock(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock(&ap_dev->lock);
- }
- spin_unlock(&ap_device_list_lock);
- } while (flags & AP_POLL_IMMEDIATELY);
- if (flags & AP_POLL_AFTER_TIMEOUT)
- __ap_schedule_poll_timer();
-}
-
-/**
- * ap_poll_thread(): Thread that polls for finished requests.
- * @data: Unused pointer
- *
- * AP bus poll thread. The purpose of this thread is to poll for
- * finished requests in a loop if there is a "free" cpu - that is
- * a cpu that doesn't have anything better to do. The polling stops
- * as soon as there is another task or if all messages have been
- * delivered.
- */
-static int ap_poll_thread(void *data)
-{
- DECLARE_WAITQUEUE(wait, current);
- unsigned long flags;
- int requests;
- struct ap_device *ap_dev;
-
- set_user_nice(current, MAX_NICE);
- while (1) {
- if (ap_suspend_flag)
- return 0;
- if (need_resched()) {
- schedule();
continue;
}
- add_wait_queue(&ap_poll_wait, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- if (kthread_should_stop())
- break;
- requests = atomic_read(&ap_poll_requests);
- if (requests <= 0)
- schedule();
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&ap_poll_wait, &wait);
-
- flags = 0;
- spin_lock_bh(&ap_device_list_lock);
- list_for_each_entry(ap_dev, &ap_device_list, list) {
- spin_lock(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock(&ap_dev->lock);
- }
- spin_unlock_bh(&ap_device_list_lock);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&ap_poll_wait, &wait);
- return 0;
-}
-
-static int ap_poll_thread_start(void)
-{
- int rc;
-
- if (ap_using_interrupts() || ap_suspend_flag)
- return 0;
- mutex_lock(&ap_poll_thread_mutex);
- if (!ap_poll_kthread) {
- ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
- rc = PTR_RET(ap_poll_kthread);
- if (rc)
- ap_poll_kthread = NULL;
- }
- else
- rc = 0;
- mutex_unlock(&ap_poll_thread_mutex);
- return rc;
-}
-
-static void ap_poll_thread_stop(void)
-{
- mutex_lock(&ap_poll_thread_mutex);
- if (ap_poll_kthread) {
- kthread_stop(ap_poll_kthread);
- ap_poll_kthread = NULL;
}
- mutex_unlock(&ap_poll_thread_mutex);
+out:
+ mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
}
-/**
- * ap_request_timeout(): Handling of request timeouts
- * @data: Holds the AP device.
- *
- * Handles request timeouts.
- */
-static void ap_request_timeout(unsigned long data)
+static void ap_config_timeout(unsigned long ptr)
{
- struct ap_device *ap_dev = (struct ap_device *) data;
-
- if (ap_dev->reset == AP_RESET_ARMED) {
- ap_dev->reset = AP_RESET_DO;
-
- if (ap_using_interrupts())
- tasklet_schedule(&ap_tasklet);
- }
+ if (ap_suspend_flag)
+ return;
+ queue_work(system_long_wq, &ap_scan_work);
}
static void ap_reset_domain(void)
{
int i;
- if ((ap_domain_index != -1) && (ap_test_config_domain(ap_domain_index)))
- for (i = 0; i < AP_DEVICES; i++)
- ap_reset_queue(AP_MKQID(i, ap_domain_index));
+ if (ap_domain_index == -1 || !ap_test_config_domain(ap_domain_index))
+ return;
+ for (i = 0; i < AP_DEVICES; i++)
+ ap_reset_queue(AP_MKQID(i, ap_domain_index));
}
static void ap_reset_all(void)
*/
int __init ap_module_init(void)
{
+ int max_domain_id;
int rc, i;
- if (ap_domain_index < -1 || ap_domain_index >= AP_DOMAINS) {
- pr_warning("%d is not a valid cryptographic domain\n",
- ap_domain_index);
+ if (ap_instructions_available() != 0) {
+ pr_warn("The hardware system does not support AP instructions\n");
+ return -ENODEV;
+ }
+
+ /* Get AP configuration data if available */
+ ap_init_configuration();
+
+ if (ap_configuration)
+ max_domain_id = ap_max_domain_id ? : (AP_DOMAINS - 1);
+ else
+ max_domain_id = 15;
+ if (ap_domain_index < -1 || ap_domain_index > max_domain_id) {
+ pr_warn("%d is not a valid cryptographic domain\n",
+ ap_domain_index);
return -EINVAL;
}
/* In resume callback we need to know if the user had set the domain.
if (ap_domain_index >= 0)
user_set_domain = 1;
- if (ap_instructions_available() != 0) {
- pr_warning("The hardware system does not support "
- "AP instructions\n");
- return -ENODEV;
- }
if (ap_interrupts_available()) {
rc = register_adapter_interrupt(&ap_airq);
ap_airq_flag = (rc == 0);
if (rc)
goto out_bus;
- ap_work_queue = create_singlethread_workqueue("kapwork");
- if (!ap_work_queue) {
- rc = -ENOMEM;
- goto out_root;
- }
-
- ap_query_configuration();
- if (ap_select_domain() == 0)
- ap_scan_bus(NULL);
-
/* Setup the AP bus rescan timer. */
- init_timer(&ap_config_timer);
- ap_config_timer.function = ap_config_timeout;
- ap_config_timer.data = 0;
- ap_config_timer.expires = jiffies + ap_config_time * HZ;
- add_timer(&ap_config_timer);
+ setup_timer(&ap_config_timer, ap_config_timeout, 0);
- /* Setup the high resultion poll timer.
+ /*
+ * Setup the high resultion poll timer.
* If we are running under z/VM adjust polling to z/VM polling rate.
*/
if (MACHINE_IS_VM)
goto out_work;
}
+ rc = register_pm_notifier(&ap_power_notifier);
+ if (rc)
+ goto out_pm;
+
+ queue_work(system_long_wq, &ap_scan_work);
+
return 0;
+out_pm:
+ ap_poll_thread_stop();
out_work:
- del_timer_sync(&ap_config_timer);
hrtimer_cancel(&ap_poll_timer);
- destroy_workqueue(ap_work_queue);
-out_root:
root_device_unregister(ap_root_device);
out_bus:
while (i--)
unregister_reset_call(&ap_reset_call);
if (ap_using_interrupts())
unregister_adapter_interrupt(&ap_airq);
+ kfree(ap_configuration);
return rc;
}
-static int __ap_match_all(struct device *dev, void *data)
-{
- return 1;
-}
-
/**
* ap_modules_exit(): The module termination code
*
void ap_module_exit(void)
{
int i;
- struct device *dev;
ap_reset_domain();
ap_poll_thread_stop();
del_timer_sync(&ap_config_timer);
hrtimer_cancel(&ap_poll_timer);
- destroy_workqueue(ap_work_queue);
tasklet_kill(&ap_tasklet);
- while ((dev = bus_find_device(&ap_bus_type, NULL, NULL,
- __ap_match_all)))
- {
- device_unregister(dev);
- put_device(dev);
- }
+ bus_for_each_dev(&ap_bus_type, NULL, NULL, __ap_devices_unregister);
for (i = 0; ap_bus_attrs[i]; i++)
bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
+ unregister_pm_notifier(&ap_power_notifier);
root_device_unregister(ap_root_device);
bus_unregister(&ap_bus_type);
+ kfree(ap_configuration);
unregister_reset_call(&ap_reset_call);
if (ap_using_interrupts())
unregister_adapter_interrupt(&ap_airq);
#define AP_CONFIG_TIME 30 /* Time in seconds between AP bus rescans. */
#define AP_POLL_TIME 1 /* Time in ticks between receive polls. */
-#define AP_POLL_IMMEDIATELY 1 /* continue running poll tasklet */
-#define AP_POLL_AFTER_TIMEOUT 2 /* run poll tasklet again after timout */
-
extern int ap_domain_index;
/**
unsigned int pad2 : 16;
} __packed;
-#define AP_QUEUE_STATUS_INVALID \
- { 1, 1, 1, 0xF, 1, 0xFF, 0xFFFF }
-
-static inline
-int ap_queue_status_invalid_test(struct ap_queue_status *status)
-{
- struct ap_queue_status invalid = AP_QUEUE_STATUS_INVALID;
- return !(memcmp(status, &invalid, sizeof(struct ap_queue_status)));
-}
-#define AP_MAX_BITS 31
static inline int ap_test_bit(unsigned int *ptr, unsigned int nr)
{
- if (nr > AP_MAX_BITS)
- return 0;
return (*ptr & (0x80000000u >> nr)) != 0;
}
#define AP_FUNC_EP11 5
#define AP_FUNC_APXA 6
-/*
- * AP reset flag states
- */
-#define AP_RESET_IGNORE 0 /* request timeout will be ignored */
-#define AP_RESET_ARMED 1 /* request timeout timer is active */
-#define AP_RESET_DO 2 /* AP reset required */
-#define AP_RESET_IN_PROGRESS 3 /* AP reset in progress */
-
/*
* AP interrupt states
*/
#define AP_INTR_DISABLED 0 /* AP interrupt disabled */
#define AP_INTR_ENABLED 1 /* AP interrupt enabled */
-#define AP_INTR_IN_PROGRESS 3 /* AP interrupt in progress */
+
+/*
+ * AP device states
+ */
+enum ap_state {
+ AP_STATE_RESET_START,
+ AP_STATE_RESET_WAIT,
+ AP_STATE_SETIRQ_WAIT,
+ AP_STATE_IDLE,
+ AP_STATE_WORKING,
+ AP_STATE_QUEUE_FULL,
+ AP_STATE_SUSPEND_WAIT,
+ AP_STATE_BORKED,
+ NR_AP_STATES
+};
+
+/*
+ * AP device events
+ */
+enum ap_event {
+ AP_EVENT_POLL,
+ AP_EVENT_TIMEOUT,
+ NR_AP_EVENTS
+};
+
+/*
+ * AP wait behaviour
+ */
+enum ap_wait {
+ AP_WAIT_AGAIN, /* retry immediately */
+ AP_WAIT_TIMEOUT, /* wait for timeout */
+ AP_WAIT_INTERRUPT, /* wait for thin interrupt (if available) */
+ AP_WAIT_NONE, /* no wait */
+ NR_AP_WAIT
+};
struct ap_device;
struct ap_message;
int ap_driver_register(struct ap_driver *, struct module *, char *);
void ap_driver_unregister(struct ap_driver *);
+typedef enum ap_wait (ap_func_t)(struct ap_device *ap_dev);
+
struct ap_device {
struct device device;
struct ap_driver *drv; /* Pointer to AP device driver. */
spinlock_t lock; /* Per device lock. */
struct list_head list; /* private list of all AP devices. */
+ enum ap_state state; /* State of the AP device. */
+
ap_qid_t qid; /* AP queue id. */
int queue_depth; /* AP queue depth.*/
int device_type; /* AP device type. */
int raw_hwtype; /* AP raw hardware type. */
unsigned int functions; /* AP device function bitfield. */
- int unregistered; /* marks AP device as unregistered */
struct timer_list timeout; /* Timer for request timeouts. */
- int reset; /* Reset required after req. timeout. */
int interrupt; /* indicate if interrupts are enabled */
int queue_count; /* # messages currently on AP queue. */
unsigned long long psmid; /* Message id. */
void *message; /* Pointer to message buffer. */
size_t length; /* Message length. */
+ int rc; /* Return code for this message */
void *private; /* ap driver private pointer. */
unsigned int special:1; /* Used for special commands. */
{
ap_msg->psmid = 0;
ap_msg->length = 0;
+ ap_msg->rc = 0;
ap_msg->special = 0;
ap_msg->receive = NULL;
}
unsigned long long z1, z2, z3;
int rc, copied;
- if (crt->outputdatalength < crt->inputdatalength ||
- (crt->inputdatalength & 1))
+ if (crt->outputdatalength < crt->inputdatalength)
return -EINVAL;
/*
* As long as outputdatalength is big enough, we can set the
memset(key, 0, sizeof(*key));
- short_len = crt->inputdatalength / 2;
+ short_len = (crt->inputdatalength + 1) / 2;
long_len = short_len + 8;
pad_len = -(3*long_len + 2*short_len) & 7;
key_len = 3*long_len + 2*short_len + pad_len + crt->inputdatalength;
unsigned char *p, *q, *dp, *dq, *u, *inp;
mod_len = crt->inputdatalength;
- short_len = mod_len / 2;
+ short_len = (mod_len + 1) / 2;
/*
* CEX2A and CEX3A w/o FW update can handle requests up to
int length;
/* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
+ if (!reply)
+ goto out; /* ap_msg->rc indicates the error */
t80h = reply->message;
if (t80h->type == TYPE80_RSP_CODE) {
if (ap_dev->device_type == AP_DEVICE_TYPE_CEX2A)
init_completion(&work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, mex->outputdata,
- mex->outputdatalength);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response(zdev, &ap_msg, mex->outputdata,
+ mex->outputdatalength);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
init_completion(&work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, crt->outputdata,
- crt->outputdatalength);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response(zdev, &ap_msg, crt->outputdata,
+ crt->outputdatalength);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
int length;
/* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
+ if (!reply)
+ goto out; /* ap_msg->rc indicates the error */
t86r = reply->message;
if (t86r->hdr.type == TYPE86_RSP_CODE &&
t86r->cprbx.cprb_ver_id == 0x02) {
int length;
/* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
+ if (!reply)
+ goto out; /* ap_msg->rc indicates the error */
t86r = reply->message;
if (t86r->hdr.type == TYPE86_RSP_CODE &&
t86r->cprbx.cprb_ver_id == 0x04) {
init_completion(&resp_type.work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_ica(zdev, &ap_msg, mex->outputdata,
- mex->outputdatalength);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response_ica(zdev, &ap_msg,
+ mex->outputdata,
+ mex->outputdatalength);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
init_completion(&resp_type.work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_ica(zdev, &ap_msg, crt->outputdata,
- crt->outputdatalength);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response_ica(zdev, &ap_msg,
+ crt->outputdata,
+ crt->outputdatalength);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
init_completion(&resp_type.work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_xcrb(zdev, &ap_msg, xcRB);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response_xcrb(zdev, &ap_msg, xcRB);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
init_completion(&resp_type.work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_ep11_xcrb(zdev, &ap_msg, xcrb);
- else /* Signal pending. */
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response_ep11_xcrb(zdev, &ap_msg, xcrb);
+ } else
+ /* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
init_completion(&resp_type.work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_rng(zdev, &ap_msg, buffer);
- else
+ if (rc == 0) {
+ rc = ap_msg.rc;
+ if (rc == 0)
+ rc = convert_response_rng(zdev, &ap_msg, buffer);
+ } else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
kfree(ap_msg.message);
+++ /dev/null
-/*
- * zcrypt 2.1.0
- *
- * Copyright IBM Corp. 2001, 2006
- * Author(s): Robert Burroughs
- * Eric Rossman (edrossma@us.ibm.com)
- *
- * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
- * Ralph Wuerthner <rwuerthn@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define KMSG_COMPONENT "zcrypt"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/atomic.h>
-#include <asm/uaccess.h>
-
-#include "ap_bus.h"
-#include "zcrypt_api.h"
-#include "zcrypt_error.h"
-#include "zcrypt_pcica.h"
-
-#define PCICA_MIN_MOD_SIZE 1 /* 8 bits */
-#define PCICA_MAX_MOD_SIZE 256 /* 2048 bits */
-
-#define PCICA_SPEED_RATING 2800
-
-#define PCICA_MAX_MESSAGE_SIZE 0x3a0 /* sizeof(struct type4_lcr) */
-#define PCICA_MAX_RESPONSE_SIZE 0x110 /* max outputdatalength + type80_hdr */
-
-#define PCICA_CLEANUP_TIME (15*HZ)
-
-static struct ap_device_id zcrypt_pcica_ids[] = {
- { AP_DEVICE(AP_DEVICE_TYPE_PCICA) },
- { /* end of list */ },
-};
-
-MODULE_DEVICE_TABLE(ap, zcrypt_pcica_ids);
-MODULE_AUTHOR("IBM Corporation");
-MODULE_DESCRIPTION("PCICA Cryptographic Coprocessor device driver, "
- "Copyright IBM Corp. 2001, 2006");
-MODULE_LICENSE("GPL");
-
-static int zcrypt_pcica_probe(struct ap_device *ap_dev);
-static void zcrypt_pcica_remove(struct ap_device *ap_dev);
-static void zcrypt_pcica_receive(struct ap_device *, struct ap_message *,
- struct ap_message *);
-
-static struct ap_driver zcrypt_pcica_driver = {
- .probe = zcrypt_pcica_probe,
- .remove = zcrypt_pcica_remove,
- .ids = zcrypt_pcica_ids,
- .request_timeout = PCICA_CLEANUP_TIME,
-};
-
-/**
- * Convert a ICAMEX message to a type4 MEX message.
- *
- * @zdev: crypto device pointer
- * @zreq: crypto request pointer
- * @mex: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICAMEX_msg_to_type4MEX_msg(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo *mex)
-{
- unsigned char *modulus, *exponent, *message;
- int mod_len;
-
- mod_len = mex->inputdatalength;
-
- if (mod_len <= 128) {
- struct type4_sme *sme = ap_msg->message;
- memset(sme, 0, sizeof(*sme));
- ap_msg->length = sizeof(*sme);
- sme->header.msg_fmt = TYPE4_SME_FMT;
- sme->header.msg_len = sizeof(*sme);
- sme->header.msg_type_code = TYPE4_TYPE_CODE;
- sme->header.request_code = TYPE4_REQU_CODE;
- modulus = sme->modulus + sizeof(sme->modulus) - mod_len;
- exponent = sme->exponent + sizeof(sme->exponent) - mod_len;
- message = sme->message + sizeof(sme->message) - mod_len;
- } else {
- struct type4_lme *lme = ap_msg->message;
- memset(lme, 0, sizeof(*lme));
- ap_msg->length = sizeof(*lme);
- lme->header.msg_fmt = TYPE4_LME_FMT;
- lme->header.msg_len = sizeof(*lme);
- lme->header.msg_type_code = TYPE4_TYPE_CODE;
- lme->header.request_code = TYPE4_REQU_CODE;
- modulus = lme->modulus + sizeof(lme->modulus) - mod_len;
- exponent = lme->exponent + sizeof(lme->exponent) - mod_len;
- message = lme->message + sizeof(lme->message) - mod_len;
- }
-
- if (copy_from_user(modulus, mex->n_modulus, mod_len) ||
- copy_from_user(exponent, mex->b_key, mod_len) ||
- copy_from_user(message, mex->inputdata, mod_len))
- return -EFAULT;
- return 0;
-}
-
-/**
- * Convert a ICACRT message to a type4 CRT message.
- *
- * @zdev: crypto device pointer
- * @zreq: crypto request pointer
- * @crt: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICACRT_msg_to_type4CRT_msg(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo_crt *crt)
-{
- unsigned char *p, *q, *dp, *dq, *u, *inp;
- int mod_len, short_len, long_len;
-
- mod_len = crt->inputdatalength;
- short_len = mod_len / 2;
- long_len = mod_len / 2 + 8;
-
- if (mod_len <= 128) {
- struct type4_scr *scr = ap_msg->message;
- memset(scr, 0, sizeof(*scr));
- ap_msg->length = sizeof(*scr);
- scr->header.msg_type_code = TYPE4_TYPE_CODE;
- scr->header.request_code = TYPE4_REQU_CODE;
- scr->header.msg_fmt = TYPE4_SCR_FMT;
- scr->header.msg_len = sizeof(*scr);
- p = scr->p + sizeof(scr->p) - long_len;
- q = scr->q + sizeof(scr->q) - short_len;
- dp = scr->dp + sizeof(scr->dp) - long_len;
- dq = scr->dq + sizeof(scr->dq) - short_len;
- u = scr->u + sizeof(scr->u) - long_len;
- inp = scr->message + sizeof(scr->message) - mod_len;
- } else {
- struct type4_lcr *lcr = ap_msg->message;
- memset(lcr, 0, sizeof(*lcr));
- ap_msg->length = sizeof(*lcr);
- lcr->header.msg_type_code = TYPE4_TYPE_CODE;
- lcr->header.request_code = TYPE4_REQU_CODE;
- lcr->header.msg_fmt = TYPE4_LCR_FMT;
- lcr->header.msg_len = sizeof(*lcr);
- p = lcr->p + sizeof(lcr->p) - long_len;
- q = lcr->q + sizeof(lcr->q) - short_len;
- dp = lcr->dp + sizeof(lcr->dp) - long_len;
- dq = lcr->dq + sizeof(lcr->dq) - short_len;
- u = lcr->u + sizeof(lcr->u) - long_len;
- inp = lcr->message + sizeof(lcr->message) - mod_len;
- }
-
- if (copy_from_user(p, crt->np_prime, long_len) ||
- copy_from_user(q, crt->nq_prime, short_len) ||
- copy_from_user(dp, crt->bp_key, long_len) ||
- copy_from_user(dq, crt->bq_key, short_len) ||
- copy_from_user(u, crt->u_mult_inv, long_len) ||
- copy_from_user(inp, crt->inputdata, mod_len))
- return -EFAULT;
- return 0;
-}
-
-/**
- * Copy results from a type 84 reply message back to user space.
- *
- * @zdev: crypto device pointer
- * @reply: reply AP message.
- * @data: pointer to user output data
- * @length: size of user output data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int convert_type84(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- struct type84_hdr *t84h = reply->message;
- char *data;
-
- if (t84h->len < sizeof(*t84h) + outputdatalength) {
- /* The result is too short, the PCICA card may not do that.. */
- zdev->online = 0;
- pr_err("Cryptographic device %x failed and was set offline\n",
- zdev->ap_dev->qid);
- ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
- zdev->ap_dev->qid, zdev->online, t84h->code);
- return -EAGAIN; /* repeat the request on a different device. */
- }
- BUG_ON(t84h->len > PCICA_MAX_RESPONSE_SIZE);
- data = reply->message + t84h->len - outputdatalength;
- if (copy_to_user(outputdata, data, outputdatalength))
- return -EFAULT;
- return 0;
-}
-
-static int convert_response(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- /* Response type byte is the second byte in the response. */
- switch (((unsigned char *) reply->message)[1]) {
- case TYPE82_RSP_CODE:
- case TYPE88_RSP_CODE:
- return convert_error(zdev, reply);
- case TYPE84_RSP_CODE:
- return convert_type84(zdev, reply,
- outputdata, outputdatalength);
- default: /* Unknown response type, this should NEVER EVER happen */
- zdev->online = 0;
- pr_err("Cryptographic device %x failed and was set offline\n",
- zdev->ap_dev->qid);
- ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
- zdev->ap_dev->qid, zdev->online);
- return -EAGAIN; /* repeat the request on a different device. */
- }
-}
-
-/**
- * This function is called from the AP bus code after a crypto request
- * "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
- * @ap_dev: pointer to the AP device
- * @msg: pointer to the AP message
- * @reply: pointer to the AP reply message
- */
-static void zcrypt_pcica_receive(struct ap_device *ap_dev,
- struct ap_message *msg,
- struct ap_message *reply)
-{
- static struct error_hdr error_reply = {
- .type = TYPE82_RSP_CODE,
- .reply_code = REP82_ERROR_MACHINE_FAILURE,
- };
- struct type84_hdr *t84h;
- int length;
-
- /* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
- t84h = reply->message;
- if (t84h->code == TYPE84_RSP_CODE) {
- length = min(PCICA_MAX_RESPONSE_SIZE, (int) t84h->len);
- memcpy(msg->message, reply->message, length);
- } else
- memcpy(msg->message, reply->message, sizeof error_reply);
-out:
- complete((struct completion *) msg->private);
-}
-
-static atomic_t zcrypt_step = ATOMIC_INIT(0);
-
-/**
- * The request distributor calls this function if it picked the PCICA
- * device to handle a modexpo request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCICA device to the request distributor
- * @mex: pointer to the modexpo request buffer
- */
-static long zcrypt_pcica_modexpo(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo *mex)
-{
- struct ap_message ap_msg;
- struct completion work;
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcica_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &work;
- rc = ICAMEX_msg_to_type4MEX_msg(zdev, &ap_msg, mex);
- if (rc)
- goto out_free;
- init_completion(&work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, mex->outputdata,
- mex->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- kfree(ap_msg.message);
- return rc;
-}
-
-/**
- * The request distributor calls this function if it picked the PCICA
- * device to handle a modexpo_crt request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCICA device to the request distributor
- * @crt: pointer to the modexpoc_crt request buffer
- */
-static long zcrypt_pcica_modexpo_crt(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo_crt *crt)
-{
- struct ap_message ap_msg;
- struct completion work;
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcica_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &work;
- rc = ICACRT_msg_to_type4CRT_msg(zdev, &ap_msg, crt);
- if (rc)
- goto out_free;
- init_completion(&work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, crt->outputdata,
- crt->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- kfree(ap_msg.message);
- return rc;
-}
-
-/**
- * The crypto operations for a PCICA card.
- */
-static struct zcrypt_ops zcrypt_pcica_ops = {
- .rsa_modexpo = zcrypt_pcica_modexpo,
- .rsa_modexpo_crt = zcrypt_pcica_modexpo_crt,
-};
-
-/**
- * Probe function for PCICA cards. It always accepts the AP device
- * since the bus_match already checked the hardware type.
- * @ap_dev: pointer to the AP device.
- */
-static int zcrypt_pcica_probe(struct ap_device *ap_dev)
-{
- struct zcrypt_device *zdev;
- int rc;
-
- zdev = zcrypt_device_alloc(PCICA_MAX_RESPONSE_SIZE);
- if (!zdev)
- return -ENOMEM;
- zdev->ap_dev = ap_dev;
- zdev->ops = &zcrypt_pcica_ops;
- zdev->online = 1;
- zdev->user_space_type = ZCRYPT_PCICA;
- zdev->type_string = "PCICA";
- zdev->min_mod_size = PCICA_MIN_MOD_SIZE;
- zdev->max_mod_size = PCICA_MAX_MOD_SIZE;
- zdev->speed_rating = PCICA_SPEED_RATING;
- zdev->max_exp_bit_length = PCICA_MAX_MOD_SIZE;
- ap_dev->reply = &zdev->reply;
- ap_dev->private = zdev;
- rc = zcrypt_device_register(zdev);
- if (rc)
- goto out_free;
- return 0;
-
-out_free:
- ap_dev->private = NULL;
- zcrypt_device_free(zdev);
- return rc;
-}
-
-/**
- * This is called to remove the extended PCICA driver information
- * if an AP device is removed.
- */
-static void zcrypt_pcica_remove(struct ap_device *ap_dev)
-{
- struct zcrypt_device *zdev = ap_dev->private;
-
- zcrypt_device_unregister(zdev);
-}
-
-int __init zcrypt_pcica_init(void)
-{
- return ap_driver_register(&zcrypt_pcica_driver, THIS_MODULE, "pcica");
-}
-
-void zcrypt_pcica_exit(void)
-{
- ap_driver_unregister(&zcrypt_pcica_driver);
-}
-
-module_init(zcrypt_pcica_init);
-module_exit(zcrypt_pcica_exit);
+++ /dev/null
-/*
- * zcrypt 2.1.0
- *
- * Copyright IBM Corp. 2001, 2006
- * Author(s): Robert Burroughs
- * Eric Rossman (edrossma@us.ibm.com)
- *
- * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ZCRYPT_PCICA_H_
-#define _ZCRYPT_PCICA_H_
-
-/**
- * The type 4 message family is associated with a PCICA card.
- *
- * The four members of the family are described below.
- *
- * Note that all unsigned char arrays are right-justified and left-padded
- * with zeroes.
- *
- * Note that all reserved fields must be zeroes.
- */
-struct type4_hdr {
- unsigned char reserved1;
- unsigned char msg_type_code; /* 0x04 */
- unsigned short msg_len;
- unsigned char request_code; /* 0x40 */
- unsigned char msg_fmt;
- unsigned short reserved2;
-} __attribute__((packed));
-
-#define TYPE4_TYPE_CODE 0x04
-#define TYPE4_REQU_CODE 0x40
-
-#define TYPE4_SME_FMT 0x00
-#define TYPE4_LME_FMT 0x10
-#define TYPE4_SCR_FMT 0x40
-#define TYPE4_LCR_FMT 0x50
-
-/* Mod-Exp, with a small modulus */
-struct type4_sme {
- struct type4_hdr header;
- unsigned char message[128];
- unsigned char exponent[128];
- unsigned char modulus[128];
-} __attribute__((packed));
-
-/* Mod-Exp, with a large modulus */
-struct type4_lme {
- struct type4_hdr header;
- unsigned char message[256];
- unsigned char exponent[256];
- unsigned char modulus[256];
-} __attribute__((packed));
-
-/* CRT, with a small modulus */
-struct type4_scr {
- struct type4_hdr header;
- unsigned char message[128];
- unsigned char dp[72];
- unsigned char dq[64];
- unsigned char p[72];
- unsigned char q[64];
- unsigned char u[72];
-} __attribute__((packed));
-
-/* CRT, with a large modulus */
-struct type4_lcr {
- struct type4_hdr header;
- unsigned char message[256];
- unsigned char dp[136];
- unsigned char dq[128];
- unsigned char p[136];
- unsigned char q[128];
- unsigned char u[136];
-} __attribute__((packed));
-
-/**
- * The type 84 response family is associated with a PCICA card.
- *
- * Note that all unsigned char arrays are right-justified and left-padded
- * with zeroes.
- *
- * Note that all reserved fields must be zeroes.
- */
-
-struct type84_hdr {
- unsigned char reserved1;
- unsigned char code;
- unsigned short len;
- unsigned char reserved2[4];
-} __attribute__((packed));
-
-#define TYPE84_RSP_CODE 0x84
-
-int zcrypt_pcica_init(void);
-void zcrypt_pcica_exit(void);
-
-#endif /* _ZCRYPT_PCICA_H_ */
+++ /dev/null
-/*
- * zcrypt 2.1.0
- *
- * Copyright IBM Corp. 2001, 2006
- * Author(s): Robert Burroughs
- * Eric Rossman (edrossma@us.ibm.com)
- *
- * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
- * Ralph Wuerthner <rwuerthn@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define KMSG_COMPONENT "zcrypt"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/err.h>
-#include <linux/atomic.h>
-#include <asm/uaccess.h>
-
-#include "ap_bus.h"
-#include "zcrypt_api.h"
-#include "zcrypt_error.h"
-#include "zcrypt_pcicc.h"
-#include "zcrypt_cca_key.h"
-
-#define PCICC_MIN_MOD_SIZE 64 /* 512 bits */
-#define PCICC_MAX_MOD_SIZE_OLD 128 /* 1024 bits */
-#define PCICC_MAX_MOD_SIZE 256 /* 2048 bits */
-
-/*
- * PCICC cards need a speed rating of 0. This keeps them at the end of
- * the zcrypt device list (see zcrypt_api.c). PCICC cards are only
- * used if no other cards are present because they are slow and can only
- * cope with PKCS12 padded requests. The logic is queer. PKCS11 padded
- * requests are rejected. The modexpo function encrypts PKCS12 padded data
- * and decrypts any non-PKCS12 padded data (except PKCS11) in the assumption
- * that it's encrypted PKCS12 data. The modexpo_crt function always decrypts
- * the data in the assumption that its PKCS12 encrypted data.
- */
-#define PCICC_SPEED_RATING 0
-
-#define PCICC_MAX_MESSAGE_SIZE 0x710 /* max size type6 v1 crt message */
-#define PCICC_MAX_RESPONSE_SIZE 0x710 /* max size type86 v1 reply */
-
-#define PCICC_CLEANUP_TIME (15*HZ)
-
-static struct ap_device_id zcrypt_pcicc_ids[] = {
- { AP_DEVICE(AP_DEVICE_TYPE_PCICC) },
- { /* end of list */ },
-};
-
-MODULE_DEVICE_TABLE(ap, zcrypt_pcicc_ids);
-MODULE_AUTHOR("IBM Corporation");
-MODULE_DESCRIPTION("PCICC Cryptographic Coprocessor device driver, "
- "Copyright IBM Corp. 2001, 2006");
-MODULE_LICENSE("GPL");
-
-static int zcrypt_pcicc_probe(struct ap_device *ap_dev);
-static void zcrypt_pcicc_remove(struct ap_device *ap_dev);
-static void zcrypt_pcicc_receive(struct ap_device *, struct ap_message *,
- struct ap_message *);
-
-static struct ap_driver zcrypt_pcicc_driver = {
- .probe = zcrypt_pcicc_probe,
- .remove = zcrypt_pcicc_remove,
- .ids = zcrypt_pcicc_ids,
- .request_timeout = PCICC_CLEANUP_TIME,
-};
-
-/**
- * The following is used to initialize the CPRB passed to the PCICC card
- * in a type6 message. The 3 fields that must be filled in at execution
- * time are req_parml, rpl_parml and usage_domain. Note that all three
- * fields are *little*-endian. Actually, everything about this interface
- * is ascii/little-endian, since the device has 'Intel inside'.
- *
- * The CPRB is followed immediately by the parm block.
- * The parm block contains:
- * - function code ('PD' 0x5044 or 'PK' 0x504B)
- * - rule block (0x0A00 'PKCS-1.2' or 0x0A00 'ZERO-PAD')
- * - VUD block
- */
-static struct CPRB static_cprb = {
- .cprb_len = cpu_to_le16(0x0070),
- .cprb_ver_id = 0x41,
- .func_id = {0x54,0x32},
- .checkpoint_flag= 0x01,
- .svr_namel = cpu_to_le16(0x0008),
- .svr_name = {'I','C','S','F',' ',' ',' ',' '}
-};
-
-/**
- * Check the message for PKCS11 padding.
- */
-static inline int is_PKCS11_padded(unsigned char *buffer, int length)
-{
- int i;
- if ((buffer[0] != 0x00) || (buffer[1] != 0x01))
- return 0;
- for (i = 2; i < length; i++)
- if (buffer[i] != 0xFF)
- break;
- if (i < 10 || i == length)
- return 0;
- if (buffer[i] != 0x00)
- return 0;
- return 1;
-}
-
-/**
- * Check the message for PKCS12 padding.
- */
-static inline int is_PKCS12_padded(unsigned char *buffer, int length)
-{
- int i;
- if ((buffer[0] != 0x00) || (buffer[1] != 0x02))
- return 0;
- for (i = 2; i < length; i++)
- if (buffer[i] == 0x00)
- break;
- if ((i < 10) || (i == length))
- return 0;
- if (buffer[i] != 0x00)
- return 0;
- return 1;
-}
-
-/**
- * Convert a ICAMEX message to a type6 MEX message.
- *
- * @zdev: crypto device pointer
- * @zreq: crypto request pointer
- * @mex: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICAMEX_msg_to_type6MEX_msg(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo *mex)
-{
- static struct type6_hdr static_type6_hdr = {
- .type = 0x06,
- .offset1 = 0x00000058,
- .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50,
- 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01},
- .function_code = {'P','K'},
- };
- static struct function_and_rules_block static_pke_function_and_rules ={
- .function_code = {'P','K'},
- .ulen = cpu_to_le16(10),
- .only_rule = {'P','K','C','S','-','1','.','2'}
- };
- struct {
- struct type6_hdr hdr;
- struct CPRB cprb;
- struct function_and_rules_block fr;
- unsigned short length;
- char text[0];
- } __attribute__((packed)) *msg = ap_msg->message;
- int vud_len, pad_len, size;
-
- /* VUD.ciphertext */
- if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength))
- return -EFAULT;
-
- if (is_PKCS11_padded(msg->text, mex->inputdatalength))
- return -EINVAL;
-
- /* static message header and f&r */
- msg->hdr = static_type6_hdr;
- msg->fr = static_pke_function_and_rules;
-
- if (is_PKCS12_padded(msg->text, mex->inputdatalength)) {
- /* strip the padding and adjust the data length */
- pad_len = strnlen(msg->text + 2, mex->inputdatalength - 2) + 3;
- if (pad_len <= 9 || pad_len >= mex->inputdatalength)
- return -ENODEV;
- vud_len = mex->inputdatalength - pad_len;
- memmove(msg->text, msg->text + pad_len, vud_len);
- msg->length = cpu_to_le16(vud_len + 2);
-
- /* Set up key after the variable length text. */
- size = zcrypt_type6_mex_key_en(mex, msg->text + vud_len, 0);
- if (size < 0)
- return size;
- size += sizeof(*msg) + vud_len; /* total size of msg */
- } else {
- vud_len = mex->inputdatalength;
- msg->length = cpu_to_le16(2 + vud_len);
-
- msg->hdr.function_code[1] = 'D';
- msg->fr.function_code[1] = 'D';
-
- /* Set up key after the variable length text. */
- size = zcrypt_type6_mex_key_de(mex, msg->text + vud_len, 0);
- if (size < 0)
- return size;
- size += sizeof(*msg) + vud_len; /* total size of msg */
- }
-
- /* message header, cprb and f&r */
- msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4;
- msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr);
-
- msg->cprb = static_cprb;
- msg->cprb.usage_domain[0]= AP_QID_QUEUE(zdev->ap_dev->qid);
- msg->cprb.req_parml = cpu_to_le16(size - sizeof(msg->hdr) -
- sizeof(msg->cprb));
- msg->cprb.rpl_parml = cpu_to_le16(msg->hdr.FromCardLen1);
-
- ap_msg->length = (size + 3) & -4;
- return 0;
-}
-
-/**
- * Convert a ICACRT message to a type6 CRT message.
- *
- * @zdev: crypto device pointer
- * @zreq: crypto request pointer
- * @crt: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICACRT_msg_to_type6CRT_msg(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo_crt *crt)
-{
- static struct type6_hdr static_type6_hdr = {
- .type = 0x06,
- .offset1 = 0x00000058,
- .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50,
- 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01},
- .function_code = {'P','D'},
- };
- static struct function_and_rules_block static_pkd_function_and_rules ={
- .function_code = {'P','D'},
- .ulen = cpu_to_le16(10),
- .only_rule = {'P','K','C','S','-','1','.','2'}
- };
- struct {
- struct type6_hdr hdr;
- struct CPRB cprb;
- struct function_and_rules_block fr;
- unsigned short length;
- char text[0];
- } __attribute__((packed)) *msg = ap_msg->message;
- int size;
-
- /* VUD.ciphertext */
- msg->length = cpu_to_le16(2 + crt->inputdatalength);
- if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength))
- return -EFAULT;
-
- if (is_PKCS11_padded(msg->text, crt->inputdatalength))
- return -EINVAL;
-
- /* Set up key after the variable length text. */
- size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 0);
- if (size < 0)
- return size;
- size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */
-
- /* message header, cprb and f&r */
- msg->hdr = static_type6_hdr;
- msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4;
- msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr);
-
- msg->cprb = static_cprb;
- msg->cprb.usage_domain[0] = AP_QID_QUEUE(zdev->ap_dev->qid);
- msg->cprb.req_parml = msg->cprb.rpl_parml =
- cpu_to_le16(size - sizeof(msg->hdr) - sizeof(msg->cprb));
-
- msg->fr = static_pkd_function_and_rules;
-
- ap_msg->length = (size + 3) & -4;
- return 0;
-}
-
-/**
- * Copy results from a type 86 reply message back to user space.
- *
- * @zdev: crypto device pointer
- * @reply: reply AP message.
- * @data: pointer to user output data
- * @length: size of user output data
- *
- * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
- */
-struct type86_reply {
- struct type86_hdr hdr;
- struct type86_fmt2_ext fmt2;
- struct CPRB cprb;
- unsigned char pad[4]; /* 4 byte function code/rules block ? */
- unsigned short length;
- char text[0];
-} __attribute__((packed));
-
-static int convert_type86(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- static unsigned char static_pad[] = {
- 0x00,0x02,
- 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD,
- 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57,
- 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B,
- 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39,
- 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5,
- 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D,
- 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB,
- 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F,
- 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9,
- 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45,
- 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9,
- 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F,
- 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD,
- 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D,
- 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD,
- 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9,
- 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B,
- 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B,
- 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B,
- 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD,
- 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7,
- 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1,
- 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3,
- 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23,
- 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55,
- 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43,
- 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F,
- 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F,
- 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5,
- 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD,
- 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41,
- 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09
- };
- struct type86_reply *msg = reply->message;
- unsigned short service_rc, service_rs;
- unsigned int reply_len, pad_len;
- char *data;
-
- service_rc = le16_to_cpu(msg->cprb.ccp_rtcode);
- if (unlikely(service_rc != 0)) {
- service_rs = le16_to_cpu(msg->cprb.ccp_rscode);
- if (service_rc == 8 && service_rs == 66)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 65)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 770) {
- zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD;
- return -EAGAIN;
- }
- if (service_rc == 8 && service_rs == 783) {
- zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD;
- return -EAGAIN;
- }
- if (service_rc == 8 && service_rs == 72)
- return -EINVAL;
- zdev->online = 0;
- pr_err("Cryptographic device %x failed and was set offline\n",
- zdev->ap_dev->qid);
- ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
- zdev->ap_dev->qid, zdev->online,
- msg->hdr.reply_code);
- return -EAGAIN; /* repeat the request on a different device. */
- }
- data = msg->text;
- reply_len = le16_to_cpu(msg->length) - 2;
- if (reply_len > outputdatalength)
- return -EINVAL;
- /*
- * For all encipher requests, the length of the ciphertext (reply_len)
- * will always equal the modulus length. For MEX decipher requests
- * the output needs to get padded. Minimum pad size is 10.
- *
- * Currently, the cases where padding will be added is for:
- * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support
- * ZERO-PAD and CRT is only supported for PKD requests)
- * - PCICC, always
- */
- pad_len = outputdatalength - reply_len;
- if (pad_len > 0) {
- if (pad_len < 10)
- return -EINVAL;
- /* 'restore' padding left in the PCICC/PCIXCC card. */
- if (copy_to_user(outputdata, static_pad, pad_len - 1))
- return -EFAULT;
- if (put_user(0, outputdata + pad_len - 1))
- return -EFAULT;
- }
- /* Copy the crypto response to user space. */
- if (copy_to_user(outputdata + pad_len, data, reply_len))
- return -EFAULT;
- return 0;
-}
-
-static int convert_response(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- struct type86_reply *msg = reply->message;
-
- /* Response type byte is the second byte in the response. */
- switch (msg->hdr.type) {
- case TYPE82_RSP_CODE:
- case TYPE88_RSP_CODE:
- return convert_error(zdev, reply);
- case TYPE86_RSP_CODE:
- if (msg->hdr.reply_code)
- return convert_error(zdev, reply);
- if (msg->cprb.cprb_ver_id == 0x01)
- return convert_type86(zdev, reply,
- outputdata, outputdatalength);
- /* no break, incorrect cprb version is an unknown response */
- default: /* Unknown response type, this should NEVER EVER happen */
- zdev->online = 0;
- pr_err("Cryptographic device %x failed and was set offline\n",
- zdev->ap_dev->qid);
- ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
- zdev->ap_dev->qid, zdev->online);
- return -EAGAIN; /* repeat the request on a different device. */
- }
-}
-
-/**
- * This function is called from the AP bus code after a crypto request
- * "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
- * @ap_dev: pointer to the AP device
- * @msg: pointer to the AP message
- * @reply: pointer to the AP reply message
- */
-static void zcrypt_pcicc_receive(struct ap_device *ap_dev,
- struct ap_message *msg,
- struct ap_message *reply)
-{
- static struct error_hdr error_reply = {
- .type = TYPE82_RSP_CODE,
- .reply_code = REP82_ERROR_MACHINE_FAILURE,
- };
- struct type86_reply *t86r;
- int length;
-
- /* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
- t86r = reply->message;
- if (t86r->hdr.type == TYPE86_RSP_CODE &&
- t86r->cprb.cprb_ver_id == 0x01) {
- length = sizeof(struct type86_reply) + t86r->length - 2;
- length = min(PCICC_MAX_RESPONSE_SIZE, length);
- memcpy(msg->message, reply->message, length);
- } else
- memcpy(msg->message, reply->message, sizeof error_reply);
-out:
- complete((struct completion *) msg->private);
-}
-
-static atomic_t zcrypt_step = ATOMIC_INIT(0);
-
-/**
- * The request distributor calls this function if it picked the PCICC
- * device to handle a modexpo request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCICC device to the request distributor
- * @mex: pointer to the modexpo request buffer
- */
-static long zcrypt_pcicc_modexpo(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo *mex)
-{
- struct ap_message ap_msg;
- struct completion work;
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcicc_receive;
- ap_msg.length = PAGE_SIZE;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &work;
- rc = ICAMEX_msg_to_type6MEX_msg(zdev, &ap_msg, mex);
- if (rc)
- goto out_free;
- init_completion(&work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, mex->outputdata,
- mex->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- free_page((unsigned long) ap_msg.message);
- return rc;
-}
-
-/**
- * The request distributor calls this function if it picked the PCICC
- * device to handle a modexpo_crt request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCICC device to the request distributor
- * @crt: pointer to the modexpoc_crt request buffer
- */
-static long zcrypt_pcicc_modexpo_crt(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo_crt *crt)
-{
- struct ap_message ap_msg;
- struct completion work;
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcicc_receive;
- ap_msg.length = PAGE_SIZE;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &work;
- rc = ICACRT_msg_to_type6CRT_msg(zdev, &ap_msg, crt);
- if (rc)
- goto out_free;
- init_completion(&work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&work);
- if (rc == 0)
- rc = convert_response(zdev, &ap_msg, crt->outputdata,
- crt->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- free_page((unsigned long) ap_msg.message);
- return rc;
-}
-
-/**
- * The crypto operations for a PCICC card.
- */
-static struct zcrypt_ops zcrypt_pcicc_ops = {
- .rsa_modexpo = zcrypt_pcicc_modexpo,
- .rsa_modexpo_crt = zcrypt_pcicc_modexpo_crt,
-};
-
-/**
- * Probe function for PCICC cards. It always accepts the AP device
- * since the bus_match already checked the hardware type.
- * @ap_dev: pointer to the AP device.
- */
-static int zcrypt_pcicc_probe(struct ap_device *ap_dev)
-{
- struct zcrypt_device *zdev;
- int rc;
-
- zdev = zcrypt_device_alloc(PCICC_MAX_RESPONSE_SIZE);
- if (!zdev)
- return -ENOMEM;
- zdev->ap_dev = ap_dev;
- zdev->ops = &zcrypt_pcicc_ops;
- zdev->online = 1;
- zdev->user_space_type = ZCRYPT_PCICC;
- zdev->type_string = "PCICC";
- zdev->min_mod_size = PCICC_MIN_MOD_SIZE;
- zdev->max_mod_size = PCICC_MAX_MOD_SIZE;
- zdev->speed_rating = PCICC_SPEED_RATING;
- zdev->max_exp_bit_length = PCICC_MAX_MOD_SIZE;
- ap_dev->reply = &zdev->reply;
- ap_dev->private = zdev;
- rc = zcrypt_device_register(zdev);
- if (rc)
- goto out_free;
- return 0;
-
- out_free:
- ap_dev->private = NULL;
- zcrypt_device_free(zdev);
- return rc;
-}
-
-/**
- * This is called to remove the extended PCICC driver information
- * if an AP device is removed.
- */
-static void zcrypt_pcicc_remove(struct ap_device *ap_dev)
-{
- struct zcrypt_device *zdev = ap_dev->private;
-
- zcrypt_device_unregister(zdev);
-}
-
-int __init zcrypt_pcicc_init(void)
-{
- return ap_driver_register(&zcrypt_pcicc_driver, THIS_MODULE, "pcicc");
-}
-
-void zcrypt_pcicc_exit(void)
-{
- ap_driver_unregister(&zcrypt_pcicc_driver);
-}
-
-module_init(zcrypt_pcicc_init);
-module_exit(zcrypt_pcicc_exit);
+++ /dev/null
-/*
- * zcrypt 2.1.0
- *
- * Copyright IBM Corp. 2001, 2006
- * Author(s): Robert Burroughs
- * Eric Rossman (edrossma@us.ibm.com)
- *
- * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ZCRYPT_PCICC_H_
-#define _ZCRYPT_PCICC_H_
-
-/**
- * The type 6 message family is associated with PCICC or PCIXCC cards.
- *
- * It contains a message header followed by a CPRB, both of which
- * are described below.
- *
- * Note that all reserved fields must be zeroes.
- */
-struct type6_hdr {
- unsigned char reserved1; /* 0x00 */
- unsigned char type; /* 0x06 */
- unsigned char reserved2[2]; /* 0x0000 */
- unsigned char right[4]; /* 0x00000000 */
- unsigned char reserved3[2]; /* 0x0000 */
- unsigned char reserved4[2]; /* 0x0000 */
- unsigned char apfs[4]; /* 0x00000000 */
- unsigned int offset1; /* 0x00000058 (offset to CPRB) */
- unsigned int offset2; /* 0x00000000 */
- unsigned int offset3; /* 0x00000000 */
- unsigned int offset4; /* 0x00000000 */
- unsigned char agent_id[16]; /* PCICC: */
- /* 0x0100 */
- /* 0x4343412d4150504c202020 */
- /* 0x010101 */
- /* PCIXCC: */
- /* 0x4341000000000000 */
- /* 0x0000000000000000 */
- unsigned char rqid[2]; /* rqid. internal to 603 */
- unsigned char reserved5[2]; /* 0x0000 */
- unsigned char function_code[2]; /* for PKD, 0x5044 (ascii 'PD') */
- unsigned char reserved6[2]; /* 0x0000 */
- unsigned int ToCardLen1; /* (request CPRB len + 3) & -4 */
- unsigned int ToCardLen2; /* db len 0x00000000 for PKD */
- unsigned int ToCardLen3; /* 0x00000000 */
- unsigned int ToCardLen4; /* 0x00000000 */
- unsigned int FromCardLen1; /* response buffer length */
- unsigned int FromCardLen2; /* db len 0x00000000 for PKD */
- unsigned int FromCardLen3; /* 0x00000000 */
- unsigned int FromCardLen4; /* 0x00000000 */
-} __attribute__((packed));
-
-/**
- * CPRB
- * Note that all shorts, ints and longs are little-endian.
- * All pointer fields are 32-bits long, and mean nothing
- *
- * A request CPRB is followed by a request_parameter_block.
- *
- * The request (or reply) parameter block is organized thus:
- * function code
- * VUD block
- * key block
- */
-struct CPRB {
- unsigned short cprb_len; /* CPRB length */
- unsigned char cprb_ver_id; /* CPRB version id. */
- unsigned char pad_000; /* Alignment pad byte. */
- unsigned char srpi_rtcode[4]; /* SRPI return code LELONG */
- unsigned char srpi_verb; /* SRPI verb type */
- unsigned char flags; /* flags */
- unsigned char func_id[2]; /* function id */
- unsigned char checkpoint_flag; /* */
- unsigned char resv2; /* reserved */
- unsigned short req_parml; /* request parameter buffer */
- /* length 16-bit little endian */
- unsigned char req_parmp[4]; /* request parameter buffer *
- * pointer (means nothing: the *
- * parameter buffer follows *
- * the CPRB). */
- unsigned char req_datal[4]; /* request data buffer */
- /* length ULELONG */
- unsigned char req_datap[4]; /* request data buffer */
- /* pointer */
- unsigned short rpl_parml; /* reply parameter buffer */
- /* length 16-bit little endian */
- unsigned char pad_001[2]; /* Alignment pad bytes. ULESHORT */
- unsigned char rpl_parmp[4]; /* reply parameter buffer *
- * pointer (means nothing: the *
- * parameter buffer follows *
- * the CPRB). */
- unsigned char rpl_datal[4]; /* reply data buffer len ULELONG */
- unsigned char rpl_datap[4]; /* reply data buffer */
- /* pointer */
- unsigned short ccp_rscode; /* server reason code ULESHORT */
- unsigned short ccp_rtcode; /* server return code ULESHORT */
- unsigned char repd_parml[2]; /* replied parameter len ULESHORT*/
- unsigned char mac_data_len[2]; /* Mac Data Length ULESHORT */
- unsigned char repd_datal[4]; /* replied data length ULELONG */
- unsigned char req_pc[2]; /* PC identifier */
- unsigned char res_origin[8]; /* resource origin */
- unsigned char mac_value[8]; /* Mac Value */
- unsigned char logon_id[8]; /* Logon Identifier */
- unsigned char usage_domain[2]; /* cdx */
- unsigned char resv3[18]; /* reserved for requestor */
- unsigned short svr_namel; /* server name length ULESHORT */
- unsigned char svr_name[8]; /* server name */
-} __attribute__((packed));
-
-/**
- * The type 86 message family is associated with PCICC and PCIXCC cards.
- *
- * It contains a message header followed by a CPRB. The CPRB is
- * the same as the request CPRB, which is described above.
- *
- * If format is 1, an error condition exists and no data beyond
- * the 8-byte message header is of interest.
- *
- * The non-error message is shown below.
- *
- * Note that all reserved fields must be zeroes.
- */
-struct type86_hdr {
- unsigned char reserved1; /* 0x00 */
- unsigned char type; /* 0x86 */
- unsigned char format; /* 0x01 (error) or 0x02 (ok) */
- unsigned char reserved2; /* 0x00 */
- unsigned char reply_code; /* reply code (see above) */
- unsigned char reserved3[3]; /* 0x000000 */
-} __attribute__((packed));
-
-#define TYPE86_RSP_CODE 0x86
-#define TYPE86_FMT2 0x02
-
-struct type86_fmt2_ext {
- unsigned char reserved[4]; /* 0x00000000 */
- unsigned char apfs[4]; /* final status */
- unsigned int count1; /* length of CPRB + parameters */
- unsigned int offset1; /* offset to CPRB */
- unsigned int count2; /* 0x00000000 */
- unsigned int offset2; /* db offset 0x00000000 for PKD */
- unsigned int count3; /* 0x00000000 */
- unsigned int offset3; /* 0x00000000 */
- unsigned int count4; /* 0x00000000 */
- unsigned int offset4; /* 0x00000000 */
-} __attribute__((packed));
-
-struct function_and_rules_block {
- unsigned char function_code[2];
- unsigned short ulen;
- unsigned char only_rule[8];
-} __attribute__((packed));
-
-int zcrypt_pcicc_init(void);
-void zcrypt_pcicc_exit(void);
-
-#endif /* _ZCRYPT_PCICC_H_ */
#include <linux/io.h>
#include <linux/kvm_para.h>
#include <linux/notifier.h>
+#include <asm/diag.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/cio.h>
kfree(thinint_area);
}
-static inline long do_kvm_notify(struct subchannel_id schid,
- unsigned long queue_index,
- long cookie)
+static inline long __do_kvm_notify(struct subchannel_id schid,
+ unsigned long queue_index,
+ long cookie)
{
register unsigned long __nr asm("1") = KVM_S390_VIRTIO_CCW_NOTIFY;
register struct subchannel_id __schid asm("2") = schid;
return __rc;
}
+static inline long do_kvm_notify(struct subchannel_id schid,
+ unsigned long queue_index,
+ long cookie)
+{
+ diag_stat_inc(DIAG_STAT_X500);
+ return __do_kvm_notify(schid, queue_index, cookie);
+}
+
static bool virtio_ccw_kvm_notify(struct virtqueue *vq)
{
struct virtio_ccw_vq_info *info = vq->priv;
.llseek = noop_llseek,
};
+/*
+ * The controllers use an inline buffer instead of a mapped SGL for small,
+ * single entry buffers. Note that we treat a zero-length transfer like
+ * a mapped SGL.
+ */
+static bool twa_command_mapped(struct scsi_cmnd *cmd)
+{
+ return scsi_sg_count(cmd) != 1 ||
+ scsi_bufflen(cmd) >= TW_MIN_SGL_LENGTH;
+}
+
/* This function will complete an aen request from the isr */
static int twa_aen_complete(TW_Device_Extension *tw_dev, int request_id)
{
}
/* Now complete the io */
- scsi_dma_unmap(cmd);
+ if (twa_command_mapped(cmd))
+ scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
struct scsi_cmnd *cmd = tw_dev->srb[i];
cmd->result = (DID_RESET << 16);
- scsi_dma_unmap(cmd);
+ if (twa_command_mapped(cmd))
+ scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
}
}
retval = twa_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
- scsi_dma_unmap(SCpnt);
+ if (twa_command_mapped(SCpnt))
+ scsi_dma_unmap(SCpnt);
twa_free_request_id(tw_dev, request_id);
break;
case 1:
SCpnt->result = (DID_ERROR << 16);
- scsi_dma_unmap(SCpnt);
+ if (twa_command_mapped(SCpnt))
+ scsi_dma_unmap(SCpnt);
done(SCpnt);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
- if ((scsi_sg_count(srb) == 1) &&
- (scsi_bufflen(srb) < TW_MIN_SGL_LENGTH)) {
+ if (!twa_command_mapped(srb)) {
if (srb->sc_data_direction == DMA_TO_DEVICE ||
srb->sc_data_direction == DMA_BIDIRECTIONAL)
scsi_sg_copy_to_buffer(srb,
{
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
- if (scsi_bufflen(cmd) < TW_MIN_SGL_LENGTH &&
+ if (!twa_command_mapped(cmd) &&
(cmd->sc_data_direction == DMA_FROM_DEVICE ||
cmd->sc_data_direction == DMA_BIDIRECTIONAL)) {
if (scsi_sg_count(cmd) == 1) {
wake_up(&conn->ehwait);
}
-static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
+static int iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
{
struct iscsi_nopout hdr;
struct iscsi_task *task;
if (!rhdr && conn->ping_task)
- return;
+ return -EINVAL;
memset(&hdr, 0, sizeof(struct iscsi_nopout));
hdr.opcode = ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE;
hdr.ttt = RESERVED_ITT;
task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
- if (!task)
+ if (!task) {
iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
- else if (!rhdr) {
+ return -EIO;
+ } else if (!rhdr) {
/* only track our nops */
conn->ping_task = task;
conn->last_ping = jiffies;
}
+
+ return 0;
}
static int iscsi_nop_out_rsp(struct iscsi_task *task,
if (time_before_eq(last_recv + recv_timeout, jiffies)) {
/* send a ping to try to provoke some traffic */
ISCSI_DBG_CONN(conn, "Sending nopout as ping\n");
- iscsi_send_nopout(conn, NULL);
- next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
+ if (iscsi_send_nopout(conn, NULL))
+ next_timeout = jiffies + (1 * HZ);
+ else
+ next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
} else
next_timeout = last_recv + recv_timeout;
static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
struct mvs_slot_info *slot, u32 slot_idx)
{
+ if (!slot)
+ return;
if (!slot->task)
return;
if (!sas_protocol_ata(task->task_proto))
#include "ql4_glbl.h"
#include "ql4_inline.h"
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#define TIMEOUT_100_MS 100
#define MASK(n) DMA_BIT_MASK(n)
dh = __scsi_dh_lookup(name);
if (!dh) {
- request_module(name);
+ request_module("scsi_dh_%s", name);
dh = __scsi_dh_lookup(name);
}
drv = scsi_dh_find_driver(sdev);
if (drv)
- devinfo = scsi_dh_lookup(drv);
+ devinfo = __scsi_dh_lookup(drv);
if (devinfo)
err = scsi_dh_handler_attach(sdev, devinfo);
return err;
}
-void scsi_dh_remove_device(struct scsi_device *sdev)
+void scsi_dh_release_device(struct scsi_device *sdev)
{
if (sdev->handler)
scsi_dh_handler_detach(sdev);
+}
+
+void scsi_dh_remove_device(struct scsi_device *sdev)
+{
device_remove_file(&sdev->sdev_gendev, &scsi_dh_state_attr);
}
/* scsi_dh.c */
#ifdef CONFIG_SCSI_DH
int scsi_dh_add_device(struct scsi_device *sdev);
+void scsi_dh_release_device(struct scsi_device *sdev);
void scsi_dh_remove_device(struct scsi_device *sdev);
#else
static inline int scsi_dh_add_device(struct scsi_device *sdev) { return 0; }
+static inline void scsi_dh_release_device(struct scsi_device *sdev) { }
static inline void scsi_dh_remove_device(struct scsi_device *sdev) { }
#endif
sdev = container_of(work, struct scsi_device, ew.work);
+ scsi_dh_release_device(sdev);
+
parent = sdev->sdev_gendev.parent;
spin_lock_irqsave(sdev->host->host_lock, flags);
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
+source "drivers/soc/rockchip/Kconfig"
+source "drivers/soc/samsung/Kconfig"
source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_SOC_SAMSUNG) += samsung/
+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
--- /dev/null
+menuconfig SOC_BRCMSTB
+ bool "Broadcom STB SoC drivers"
+ depends on ARM
+ help
+ Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+ This option alone enables only some support code, while the drivers
+ can be enabled individually within this menu.
+
+ If unsure, say N.
--- /dev/null
+obj-y += common.o biuctrl.o
--- /dev/null
+/*
+ * Broadcom STB SoCs Bus Unit Interface controls
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define CPU_CREDIT_REG_OFFSET 0x184
+#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
+
+static void __iomem *cpubiuctrl_base;
+static bool mcp_wr_pairing_en;
+
+static int __init mcp_write_pairing_set(void)
+{
+ u32 creds = 0;
+
+ if (!cpubiuctrl_base)
+ return -1;
+
+ creds = readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ if (mcp_wr_pairing_en) {
+ pr_info("MCP: Enabling write pairing\n");
+ writel_relaxed(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
+ pr_info("MCP: Disabling write pairing\n");
+ writel_relaxed(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ } else {
+ pr_info("MCP: Write pairing already disabled\n");
+ }
+
+ return 0;
+}
+
+static int __init setup_hifcpubiuctrl_regs(void)
+{
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+ if (!np) {
+ pr_err("missing BIU control node\n");
+ return -ENODEV;
+ }
+
+ cpubiuctrl_base = of_iomap(np, 0);
+ if (!cpubiuctrl_base) {
+ pr_err("failed to remap BIU control base\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+out:
+ of_node_put(np);
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 cpu_credit_reg_dump; /* for save/restore */
+
+static int brcmstb_cpu_credit_reg_suspend(void)
+{
+ if (cpubiuctrl_base)
+ cpu_credit_reg_dump =
+ readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ return 0;
+}
+
+static void brcmstb_cpu_credit_reg_resume(void)
+{
+ if (cpubiuctrl_base)
+ writel_relaxed(cpu_credit_reg_dump,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+}
+
+static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
+ .suspend = brcmstb_cpu_credit_reg_suspend,
+ .resume = brcmstb_cpu_credit_reg_resume,
+};
+#endif
+
+
+void __init brcmstb_biuctrl_init(void)
+{
+ int ret;
+
+ setup_hifcpubiuctrl_regs();
+
+ ret = mcp_write_pairing_set();
+ if (ret) {
+ pr_err("MCP: Unable to disable write pairing!\n");
+ return;
+ }
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
+#endif
+}
--- /dev/null
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+
+#include <soc/brcmstb/common.h>
+
+static const struct of_device_id brcmstb_machine_match[] = {
+ { .compatible = "brcm,brcmstb", },
+ { }
+};
+
+bool soc_is_brcmstb(void)
+{
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return false;
+
+ return of_match_node(brcmstb_machine_match, root) != NULL;
+}
pwrap_writel(wrp, 0x1, PWRAP_WACS2_EN);
pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD);
pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN);
- pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
- pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
- pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
- pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
if (pwrap_is_mt8135(wrp)) {
/* enable pwrap events and pwrap bridge in AP side */
return -ENODEV;
}
+ /* Initialize watchdog, may not be done by the bootloader */
+ pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
+ pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
+ pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
+ pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
+
irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH,
"mt-pmic-pwrap", wrp);
#define PWR_STATUS_USB BIT(25)
enum clk_id {
+ MT8173_CLK_NONE,
MT8173_CLK_MM,
MT8173_CLK_MFG,
- MT8173_CLK_NONE,
- MT8173_CLK_MAX = MT8173_CLK_NONE,
+ MT8173_CLK_VENC,
+ MT8173_CLK_VENC_LT,
+ MT8173_CLK_MAX,
};
+#define MAX_CLKS 2
+
struct scp_domain_data {
const char *name;
u32 sta_mask;
u32 sram_pdn_bits;
u32 sram_pdn_ack_bits;
u32 bus_prot_mask;
- enum clk_id clk_id;
+ enum clk_id clk_id[MAX_CLKS];
+ bool active_wakeup;
};
static const struct scp_domain_data scp_domain_data[] __initconst = {
.ctl_offs = SPM_VDE_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .clk_id = MT8173_CLK_MM,
+ .clk_id = {MT8173_CLK_MM},
},
[MT8173_POWER_DOMAIN_VENC] = {
.name = "venc",
.ctl_offs = SPM_VEN_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = MT8173_CLK_MM,
+ .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC},
},
[MT8173_POWER_DOMAIN_ISP] = {
.name = "isp",
.ctl_offs = SPM_ISP_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(13, 12),
- .clk_id = MT8173_CLK_MM,
+ .clk_id = {MT8173_CLK_MM},
},
[MT8173_POWER_DOMAIN_MM] = {
.name = "mm",
.ctl_offs = SPM_DIS_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .clk_id = MT8173_CLK_MM,
+ .clk_id = {MT8173_CLK_MM},
.bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
MT8173_TOP_AXI_PROT_EN_MM_M1,
},
.ctl_offs = SPM_VEN2_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = MT8173_CLK_MM,
+ .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC_LT},
},
[MT8173_POWER_DOMAIN_AUDIO] = {
.name = "audio",
.ctl_offs = SPM_AUDIO_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = MT8173_CLK_NONE,
+ .clk_id = {MT8173_CLK_NONE},
},
[MT8173_POWER_DOMAIN_USB] = {
.name = "usb",
.ctl_offs = SPM_USB_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = MT8173_CLK_NONE,
+ .clk_id = {MT8173_CLK_NONE},
+ .active_wakeup = true,
},
[MT8173_POWER_DOMAIN_MFG_ASYNC] = {
.name = "mfg_async",
.ctl_offs = SPM_MFG_ASYNC_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = 0,
- .clk_id = MT8173_CLK_MFG,
+ .clk_id = {MT8173_CLK_MFG},
},
[MT8173_POWER_DOMAIN_MFG_2D] = {
.name = "mfg_2d",
.ctl_offs = SPM_MFG_2D_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(13, 12),
- .clk_id = MT8173_CLK_NONE,
+ .clk_id = {MT8173_CLK_NONE},
},
[MT8173_POWER_DOMAIN_MFG] = {
.name = "mfg",
.ctl_offs = SPM_MFG_PWR_CON,
.sram_pdn_bits = GENMASK(13, 8),
.sram_pdn_ack_bits = GENMASK(21, 16),
- .clk_id = MT8173_CLK_NONE,
+ .clk_id = {MT8173_CLK_NONE},
.bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
MT8173_TOP_AXI_PROT_EN_MFG_M0 |
MT8173_TOP_AXI_PROT_EN_MFG_M1 |
struct scp_domain {
struct generic_pm_domain genpd;
struct scp *scp;
- struct clk *clk;
+ struct clk *clk[MAX_CLKS];
u32 sta_mask;
void __iomem *ctl_addr;
u32 sram_pdn_bits;
u32 sram_pdn_ack_bits;
u32 bus_prot_mask;
+ bool active_wakeup;
};
struct scp {
u32 sram_pdn_ack = scpd->sram_pdn_ack_bits;
u32 val;
int ret;
+ int i;
+
+ for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
+ ret = clk_prepare_enable(scpd->clk[i]);
+ if (ret) {
+ for (--i; i >= 0; i--)
+ clk_disable_unprepare(scpd->clk[i]);
- if (scpd->clk) {
- ret = clk_prepare_enable(scpd->clk);
- if (ret)
goto err_clk;
+ }
}
val = readl(ctl_addr);
return 0;
err_pwr_ack:
- clk_disable_unprepare(scpd->clk);
+ for (i = MAX_CLKS - 1; i >= 0; i--) {
+ if (scpd->clk[i])
+ clk_disable_unprepare(scpd->clk[i]);
+ }
err_clk:
dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name);
u32 pdn_ack = scpd->sram_pdn_ack_bits;
u32 val;
int ret;
+ int i;
if (scpd->bus_prot_mask) {
ret = mtk_infracfg_set_bus_protection(scp->infracfg,
expired = true;
}
- if (scpd->clk)
- clk_disable_unprepare(scpd->clk);
+ for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
+ clk_disable_unprepare(scpd->clk[i]);
return 0;
return ret;
}
+static bool scpsys_active_wakeup(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ struct scp_domain *scpd;
+
+ genpd = pd_to_genpd(dev->pm_domain);
+ scpd = container_of(genpd, struct scp_domain, genpd);
+
+ return scpd->active_wakeup;
+}
+
static int __init scpsys_probe(struct platform_device *pdev)
{
struct genpd_onecell_data *pd_data;
struct resource *res;
- int i, ret;
+ int i, j, ret;
struct scp *scp;
struct clk *clk[MT8173_CLK_MAX];
if (IS_ERR(clk[MT8173_CLK_MFG]))
return PTR_ERR(clk[MT8173_CLK_MFG]);
+ clk[MT8173_CLK_VENC] = devm_clk_get(&pdev->dev, "venc");
+ if (IS_ERR(clk[MT8173_CLK_VENC]))
+ return PTR_ERR(clk[MT8173_CLK_VENC]);
+
+ clk[MT8173_CLK_VENC_LT] = devm_clk_get(&pdev->dev, "venc_lt");
+ if (IS_ERR(clk[MT8173_CLK_VENC_LT]))
+ return PTR_ERR(clk[MT8173_CLK_VENC_LT]);
+
scp->infracfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"infracfg");
if (IS_ERR(scp->infracfg)) {
scpd->sram_pdn_bits = data->sram_pdn_bits;
scpd->sram_pdn_ack_bits = data->sram_pdn_ack_bits;
scpd->bus_prot_mask = data->bus_prot_mask;
- if (data->clk_id != MT8173_CLK_NONE)
- scpd->clk = clk[data->clk_id];
+ scpd->active_wakeup = data->active_wakeup;
+ for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++)
+ scpd->clk[j] = clk[data->clk_id[j]];
genpd->name = data->name;
genpd->power_off = scpsys_power_off;
genpd->power_on = scpsys_power_on;
+ genpd->dev_ops.active_wakeup = scpsys_active_wakeup;
/*
* Initially turn on all domains to make the domains usable
modes. It interface with various system drivers to put the cores in
low power modes.
+config QCOM_SMEM
+ tristate "Qualcomm Shared Memory Manager (SMEM)"
+ depends on ARCH_QCOM
+ depends on HWSPINLOCK
+ help
+ Say y here to enable support for the Qualcomm Shared Memory Manager.
+ The driver provides an interface to items in a heap shared among all
+ processors in a Qualcomm platform.
+
config QCOM_SMD
tristate "Qualcomm Shared Memory Driver (SMD)"
depends on QCOM_SMEM
Say M here if you want to include support for the Qualcomm RPM as a
module. This will build a module called "qcom-smd-rpm".
-
-config QCOM_SMEM
- tristate "Qualcomm Shared Memory Manager (SMEM)"
- depends on ARCH_QCOM
- help
- Say y here to enable support for the Qualcomm Shared Memory Manager.
- The driver provides an interface to items in a heap shared among all
- processors in a Qualcomm platform.
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
#include <linux/soc/qcom/smd-rpm.h>
* @length: length of the payload
*/
struct qcom_rpm_header {
- u32 service_type;
- u32 length;
+ __le32 service_type;
+ __le32 length;
};
/**
* @data_len: length of the payload following this header
*/
struct qcom_rpm_request {
- u32 msg_id;
- u32 flags;
- u32 type;
- u32 id;
- u32 data_len;
+ __le32 msg_id;
+ __le32 flags;
+ __le32 type;
+ __le32 id;
+ __le32 data_len;
};
/**
* Multiple of these messages can be stacked in an rpm message.
*/
struct qcom_rpm_message {
- u32 msg_type;
- u32 length;
+ __le32 msg_type;
+ __le32 length;
union {
- u32 msg_id;
+ __le32 msg_id;
u8 message[0];
};
};
static unsigned msg_id = 1;
int left;
int ret;
-
struct {
struct qcom_rpm_header hdr;
struct qcom_rpm_request req;
- u8 payload[count];
- } pkt;
+ u8 payload[];
+ } *pkt;
+ size_t size = sizeof(*pkt) + count;
/* SMD packets to the RPM may not exceed 256 bytes */
- if (WARN_ON(sizeof(pkt) >= 256))
+ if (WARN_ON(size >= 256))
return -EINVAL;
+ pkt = kmalloc(size, GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
mutex_lock(&rpm->lock);
- pkt.hdr.service_type = RPM_SERVICE_TYPE_REQUEST;
- pkt.hdr.length = sizeof(struct qcom_rpm_request) + count;
+ pkt->hdr.service_type = cpu_to_le32(RPM_SERVICE_TYPE_REQUEST);
+ pkt->hdr.length = cpu_to_le32(sizeof(struct qcom_rpm_request) + count);
- pkt.req.msg_id = msg_id++;
- pkt.req.flags = BIT(state);
- pkt.req.type = type;
- pkt.req.id = id;
- pkt.req.data_len = count;
- memcpy(pkt.payload, buf, count);
+ pkt->req.msg_id = cpu_to_le32(msg_id++);
+ pkt->req.flags = cpu_to_le32(state);
+ pkt->req.type = cpu_to_le32(type);
+ pkt->req.id = cpu_to_le32(id);
+ pkt->req.data_len = cpu_to_le32(count);
+ memcpy(pkt->payload, buf, count);
- ret = qcom_smd_send(rpm->rpm_channel, &pkt, sizeof(pkt));
+ ret = qcom_smd_send(rpm->rpm_channel, pkt, size);
if (ret)
goto out;
ret = rpm->ack_status;
out:
+ kfree(pkt);
mutex_unlock(&rpm->lock);
return ret;
}
size_t count)
{
const struct qcom_rpm_header *hdr = data;
+ size_t hdr_length = le32_to_cpu(hdr->length);
const struct qcom_rpm_message *msg;
struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev);
const u8 *buf = data + sizeof(struct qcom_rpm_header);
- const u8 *end = buf + hdr->length;
+ const u8 *end = buf + hdr_length;
char msgbuf[32];
int status = 0;
- u32 len;
+ u32 len, msg_length;
- if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST ||
- hdr->length < sizeof(struct qcom_rpm_message)) {
+ if (le32_to_cpu(hdr->service_type) != RPM_SERVICE_TYPE_REQUEST ||
+ hdr_length < sizeof(struct qcom_rpm_message)) {
dev_err(&qsdev->dev, "invalid request\n");
return 0;
}
while (buf < end) {
msg = (struct qcom_rpm_message *)buf;
- switch (msg->msg_type) {
+ msg_length = le32_to_cpu(msg->length);
+ switch (le32_to_cpu(msg->msg_type)) {
case RPM_MSG_TYPE_MSG_ID:
break;
case RPM_MSG_TYPE_ERR:
- len = min_t(u32, ALIGN(msg->length, 4), sizeof(msgbuf));
+ len = min_t(u32, ALIGN(msg_length, 4), sizeof(msgbuf));
memcpy_fromio(msgbuf, msg->message, len);
msgbuf[len - 1] = 0;
break;
}
- buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg->length, 4);
+ buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg_length, 4);
}
rpm->ack_status = status;
*/
struct smd_channel_info;
+struct smd_channel_info_pair;
struct smd_channel_info_word;
+struct smd_channel_info_word_pair;
#define SMD_ALLOC_TBL_COUNT 2
#define SMD_ALLOC_TBL_SIZE 64
.fifo_base_id = 338
},
{
- .alloc_tbl_id = 14,
- .info_base_id = 266,
+ .alloc_tbl_id = 266,
+ .info_base_id = 138,
.fifo_base_id = 202,
},
};
* @name: name of the channel
* @state: local state of the channel
* @remote_state: remote state of the channel
- * @tx_info: byte aligned outgoing channel info
- * @rx_info: byte aligned incoming channel info
- * @tx_info_word: word aligned outgoing channel info
- * @rx_info_word: word aligned incoming channel info
+ * @info: byte aligned outgoing/incoming channel info
+ * @info_word: word aligned outgoing/incoming channel info
* @tx_lock: lock to make writes to the channel mutually exclusive
* @fblockread_event: wakeup event tied to tx fBLOCKREADINTR
* @tx_fifo: pointer to the outgoing ring buffer
enum smd_channel_state state;
enum smd_channel_state remote_state;
- struct smd_channel_info *tx_info;
- struct smd_channel_info *rx_info;
-
- struct smd_channel_info_word *tx_info_word;
- struct smd_channel_info_word *rx_info_word;
+ struct smd_channel_info_pair *info;
+ struct smd_channel_info_word_pair *info_word;
struct mutex tx_lock;
wait_queue_head_t fblockread_event;
* Format of the smd_info smem items, for byte aligned channels.
*/
struct smd_channel_info {
- u32 state;
+ __le32 state;
u8 fDSR;
u8 fCTS;
u8 fCD;
u8 fTAIL;
u8 fSTATE;
u8 fBLOCKREADINTR;
- u32 tail;
- u32 head;
+ __le32 tail;
+ __le32 head;
+};
+
+struct smd_channel_info_pair {
+ struct smd_channel_info tx;
+ struct smd_channel_info rx;
};
/*
* Format of the smd_info smem items, for word aligned channels.
*/
struct smd_channel_info_word {
- u32 state;
- u32 fDSR;
- u32 fCTS;
- u32 fCD;
- u32 fRI;
- u32 fHEAD;
- u32 fTAIL;
- u32 fSTATE;
- u32 fBLOCKREADINTR;
- u32 tail;
- u32 head;
+ __le32 state;
+ __le32 fDSR;
+ __le32 fCTS;
+ __le32 fCD;
+ __le32 fRI;
+ __le32 fHEAD;
+ __le32 fTAIL;
+ __le32 fSTATE;
+ __le32 fBLOCKREADINTR;
+ __le32 tail;
+ __le32 head;
};
-#define GET_RX_CHANNEL_INFO(channel, param) \
- (channel->rx_info_word ? \
- channel->rx_info_word->param : \
- channel->rx_info->param)
-
-#define SET_RX_CHANNEL_INFO(channel, param, value) \
- (channel->rx_info_word ? \
- (channel->rx_info_word->param = value) : \
- (channel->rx_info->param = value))
-
-#define GET_TX_CHANNEL_INFO(channel, param) \
- (channel->tx_info_word ? \
- channel->tx_info_word->param : \
- channel->tx_info->param)
+struct smd_channel_info_word_pair {
+ struct smd_channel_info_word tx;
+ struct smd_channel_info_word rx;
+};
-#define SET_TX_CHANNEL_INFO(channel, param, value) \
- (channel->tx_info_word ? \
- (channel->tx_info_word->param = value) : \
- (channel->tx_info->param = value))
+#define GET_RX_CHANNEL_FLAG(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
+ channel->info_word ? \
+ le32_to_cpu(channel->info_word->rx.param) : \
+ channel->info->rx.param; \
+ })
+
+#define GET_RX_CHANNEL_INFO(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
+ le32_to_cpu(channel->info_word ? \
+ channel->info_word->rx.param : \
+ channel->info->rx.param); \
+ })
+
+#define SET_RX_CHANNEL_FLAG(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
+ if (channel->info_word) \
+ channel->info_word->rx.param = cpu_to_le32(value); \
+ else \
+ channel->info->rx.param = value; \
+ })
+
+#define SET_RX_CHANNEL_INFO(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
+ if (channel->info_word) \
+ channel->info_word->rx.param = cpu_to_le32(value); \
+ else \
+ channel->info->rx.param = cpu_to_le32(value); \
+ })
+
+#define GET_TX_CHANNEL_FLAG(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
+ channel->info_word ? \
+ le32_to_cpu(channel->info_word->tx.param) : \
+ channel->info->tx.param; \
+ })
+
+#define GET_TX_CHANNEL_INFO(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
+ le32_to_cpu(channel->info_word ? \
+ channel->info_word->tx.param : \
+ channel->info->tx.param); \
+ })
+
+#define SET_TX_CHANNEL_FLAG(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
+ if (channel->info_word) \
+ channel->info_word->tx.param = cpu_to_le32(value); \
+ else \
+ channel->info->tx.param = value; \
+ })
+
+#define SET_TX_CHANNEL_INFO(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
+ if (channel->info_word) \
+ channel->info_word->tx.param = cpu_to_le32(value); \
+ else \
+ channel->info->tx.param = cpu_to_le32(value); \
+ })
/**
* struct qcom_smd_alloc_entry - channel allocation entry
*/
struct qcom_smd_alloc_entry {
u8 name[20];
- u32 cid;
- u32 flags;
- u32 ref_count;
+ __le32 cid;
+ __le32 flags;
+ __le32 ref_count;
} __packed;
#define SMD_CHANNEL_FLAGS_EDGE_MASK 0xff
static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
{
SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
- SET_TX_CHANNEL_INFO(channel, fDSR, 0);
- SET_TX_CHANNEL_INFO(channel, fCTS, 0);
- SET_TX_CHANNEL_INFO(channel, fCD, 0);
- SET_TX_CHANNEL_INFO(channel, fRI, 0);
- SET_TX_CHANNEL_INFO(channel, fHEAD, 0);
- SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
- SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
+ SET_TX_CHANNEL_FLAG(channel, fDSR, 0);
+ SET_TX_CHANNEL_FLAG(channel, fCTS, 0);
+ SET_TX_CHANNEL_FLAG(channel, fCD, 0);
+ SET_TX_CHANNEL_FLAG(channel, fRI, 0);
+ SET_TX_CHANNEL_FLAG(channel, fHEAD, 0);
+ SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
+ SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
SET_TX_CHANNEL_INFO(channel, head, 0);
SET_TX_CHANNEL_INFO(channel, tail, 0);
dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state);
- SET_TX_CHANNEL_INFO(channel, fDSR, is_open);
- SET_TX_CHANNEL_INFO(channel, fCTS, is_open);
- SET_TX_CHANNEL_INFO(channel, fCD, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fDSR, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fCTS, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fCD, is_open);
SET_TX_CHANNEL_INFO(channel, state, state);
- SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
+ SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
channel->state = state;
qcom_smd_signal_channel(channel);
/*
* Copy count bytes of data using 32bit accesses, if that's required.
*/
-static void smd_copy_to_fifo(void __iomem *_dst,
- const void *_src,
+static void smd_copy_to_fifo(void __iomem *dst,
+ const void *src,
size_t count,
bool word_aligned)
{
- u32 *dst = (u32 *)_dst;
- u32 *src = (u32 *)_src;
-
if (word_aligned) {
- count /= sizeof(u32);
- while (count--)
- writel_relaxed(*src++, dst++);
+ __iowrite32_copy(dst, src, count / sizeof(u32));
} else {
- memcpy_toio(_dst, _src, count);
+ memcpy_toio(dst, src, count);
}
}
if (word_aligned) {
count /= sizeof(u32);
while (count--)
- *dst++ = readl_relaxed(src++);
+ *dst++ = __raw_readl(src++);
} else {
memcpy_fromio(_dst, _src, count);
}
unsigned tail;
size_t len;
- word_aligned = channel->rx_info_word != NULL;
+ word_aligned = channel->info_word;
tail = GET_RX_CHANNEL_INFO(channel, tail);
len = min_t(size_t, count, channel->fifo_size - tail);
{
bool need_state_scan = false;
int remote_state;
- u32 pktlen;
+ __le32 pktlen;
int avail;
int ret;
need_state_scan = true;
}
/* Indicate that we have seen any state change */
- SET_RX_CHANNEL_INFO(channel, fSTATE, 0);
+ SET_RX_CHANNEL_FLAG(channel, fSTATE, 0);
/* Signal waiting qcom_smd_send() about the interrupt */
- if (!GET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR))
+ if (!GET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR))
wake_up_interruptible(&channel->fblockread_event);
/* Don't consume any data until we've opened the channel */
goto out;
/* Indicate that we've seen the new data */
- SET_RX_CHANNEL_INFO(channel, fHEAD, 0);
+ SET_RX_CHANNEL_FLAG(channel, fHEAD, 0);
/* Consume data */
for (;;) {
if (!channel->pkt_size && avail >= SMD_PACKET_HEADER_LEN) {
qcom_smd_channel_peek(channel, &pktlen, sizeof(pktlen));
qcom_smd_channel_advance(channel, SMD_PACKET_HEADER_LEN);
- channel->pkt_size = pktlen;
+ channel->pkt_size = le32_to_cpu(pktlen);
} else if (channel->pkt_size && avail >= channel->pkt_size) {
ret = qcom_smd_channel_recv_single(channel);
if (ret)
}
/* Indicate that we have seen and updated tail */
- SET_RX_CHANNEL_INFO(channel, fTAIL, 1);
+ SET_RX_CHANNEL_FLAG(channel, fTAIL, 1);
/* Signal the remote that we've consumed the data (if requested) */
- if (!GET_RX_CHANNEL_INFO(channel, fBLOCKREADINTR)) {
+ if (!GET_RX_CHANNEL_FLAG(channel, fBLOCKREADINTR)) {
/* Ensure ordering of channel info updates */
wmb();
unsigned head;
size_t len;
- word_aligned = channel->tx_info_word != NULL;
+ word_aligned = channel->info_word;
head = GET_TX_CHANNEL_INFO(channel, head);
len = min_t(size_t, count, channel->fifo_size - head);
*/
int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len)
{
- u32 hdr[5] = {len,};
+ __le32 hdr[5] = { cpu_to_le32(len), };
int tlen = sizeof(hdr) + len;
int ret;
/* Word aligned channels only accept word size aligned data */
- if (channel->rx_info_word != NULL && len % 4)
+ if (channel->info_word && len % 4)
+ return -EINVAL;
+
+ /* Reject packets that are too big */
+ if (tlen >= channel->fifo_size)
return -EINVAL;
ret = mutex_lock_interruptible(&channel->tx_lock);
goto out;
}
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 0);
ret = wait_event_interruptible(channel->fblockread_event,
qcom_smd_get_tx_avail(channel) >= tlen ||
if (ret)
goto out;
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
}
- SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
+ SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
qcom_smd_write_fifo(channel, hdr, sizeof(hdr));
qcom_smd_write_fifo(channel, data, len);
- SET_TX_CHANNEL_INFO(channel, fHEAD, 1);
+ SET_TX_CHANNEL_FLAG(channel, fHEAD, 1);
/* Ensure ordering of channel info updates */
wmb();
static int qcom_smd_dev_match(struct device *dev, struct device_driver *drv)
{
+ struct qcom_smd_device *qsdev = to_smd_device(dev);
+ struct qcom_smd_driver *qsdrv = container_of(drv, struct qcom_smd_driver, driver);
+ const struct qcom_smd_id *match = qsdrv->smd_match_table;
+ const char *name = qsdev->channel->name;
+
+ if (match) {
+ while (match->name[0]) {
+ if (!strcmp(match->name, name))
+ return 1;
+ match++;
+ }
+ }
+
return of_driver_match_device(dev, drv);
}
for_each_available_child_of_node(edge_node, child) {
key = "qcom,smd-channels";
ret = of_property_read_string(child, key, &name);
- if (ret) {
- of_node_put(child);
+ if (ret)
continue;
- }
if (strcmp(name, channel) == 0)
return child;
if (channel->qsdev)
return -EEXIST;
- node = qcom_smd_match_channel(edge->of_node, channel->name);
- if (!node) {
- dev_dbg(smd->dev, "no match for '%s'\n", channel->name);
- return -ENXIO;
- }
-
dev_dbg(smd->dev, "registering '%s'\n", channel->name);
qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
if (!qsdev)
return -ENOMEM;
- dev_set_name(&qsdev->dev, "%s.%s", edge->of_node->name, node->name);
+ node = qcom_smd_match_channel(edge->of_node, channel->name);
+ dev_set_name(&qsdev->dev, "%s.%s",
+ edge->of_node->name,
+ node ? node->name : channel->name);
+
qsdev->dev.parent = smd->dev;
qsdev->dev.bus = &qcom_smd_bus;
qsdev->dev.release = qcom_smd_release_device;
spin_lock_init(&channel->recv_lock);
init_waitqueue_head(&channel->fblockread_event);
- ret = qcom_smem_get(edge->remote_pid, smem_info_item, (void **)&info,
- &info_size);
- if (ret)
+ info = qcom_smem_get(edge->remote_pid, smem_info_item, &info_size);
+ if (IS_ERR(info)) {
+ ret = PTR_ERR(info);
goto free_name_and_channel;
+ }
/*
* Use the size of the item to figure out which channel info struct to
* use.
*/
if (info_size == 2 * sizeof(struct smd_channel_info_word)) {
- channel->tx_info_word = info;
- channel->rx_info_word = info + sizeof(struct smd_channel_info_word);
+ channel->info_word = info;
} else if (info_size == 2 * sizeof(struct smd_channel_info)) {
- channel->tx_info = info;
- channel->rx_info = info + sizeof(struct smd_channel_info);
+ channel->info = info;
} else {
dev_err(smd->dev,
"channel info of size %zu not supported\n", info_size);
goto free_name_and_channel;
}
- ret = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_base,
- &fifo_size);
- if (ret)
+ fifo_base = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_size);
+ if (IS_ERR(fifo_base)) {
+ ret = PTR_ERR(fifo_base);
goto free_name_and_channel;
+ }
/* The channel consist of a rx and tx fifo of equal size */
fifo_size /= 2;
unsigned long flags;
unsigned fifo_id;
unsigned info_id;
- int ret;
int tbl;
int i;
+ u32 eflags, cid;
for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) {
- ret = qcom_smem_get(edge->remote_pid,
- smem_items[tbl].alloc_tbl_id,
- (void **)&alloc_tbl,
- NULL);
- if (ret < 0)
+ alloc_tbl = qcom_smem_get(edge->remote_pid,
+ smem_items[tbl].alloc_tbl_id, NULL);
+ if (IS_ERR(alloc_tbl))
continue;
for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) {
entry = &alloc_tbl[i];
+ eflags = le32_to_cpu(entry->flags);
if (test_bit(i, edge->allocated[tbl]))
continue;
if (!entry->name[0])
continue;
- if (!(entry->flags & SMD_CHANNEL_FLAGS_PACKET))
+ if (!(eflags & SMD_CHANNEL_FLAGS_PACKET))
continue;
- if ((entry->flags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
+ if ((eflags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
continue;
- info_id = smem_items[tbl].info_base_id + entry->cid;
- fifo_id = smem_items[tbl].fifo_base_id + entry->cid;
+ cid = le32_to_cpu(entry->cid);
+ info_id = smem_items[tbl].info_base_id + cid;
+ fifo_id = smem_items[tbl].fifo_base_id + cid;
channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name);
if (IS_ERR(channel))
int num_edges;
int ret;
int i = 0;
+ void *p;
/* Wait for smem */
- ret = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL, NULL);
- if (ret == -EPROBE_DEFER)
- return ret;
+ p = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL);
+ if (PTR_ERR(p) == -EPROBE_DEFER)
+ return PTR_ERR(p);
num_edges = of_get_available_child_count(pdev->dev.of_node);
array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge);
* @params: parameters to the command
*/
struct smem_proc_comm {
- u32 command;
- u32 status;
- u32 params[2];
+ __le32 command;
+ __le32 status;
+ __le32 params[2];
};
/**
* the default region. bits 0,1 are reserved
*/
struct smem_global_entry {
- u32 allocated;
- u32 offset;
- u32 size;
- u32 aux_base; /* bits 1:0 reserved */
+ __le32 allocated;
+ __le32 offset;
+ __le32 size;
+ __le32 aux_base; /* bits 1:0 reserved */
};
#define AUX_BASE_MASK 0xfffffffc
*/
struct smem_header {
struct smem_proc_comm proc_comm[4];
- u32 version[32];
- u32 initialized;
- u32 free_offset;
- u32 available;
- u32 reserved;
+ __le32 version[32];
+ __le32 initialized;
+ __le32 free_offset;
+ __le32 available;
+ __le32 reserved;
struct smem_global_entry toc[SMEM_ITEM_COUNT];
};
* @reserved: reserved entries for later use
*/
struct smem_ptable_entry {
- u32 offset;
- u32 size;
- u32 flags;
- u16 host0;
- u16 host1;
- u32 reserved[8];
+ __le32 offset;
+ __le32 size;
+ __le32 flags;
+ __le16 host0;
+ __le16 host1;
+ __le32 reserved[8];
};
/**
* @entry: list of @smem_ptable_entry for the @num_entries partitions
*/
struct smem_ptable {
- u32 magic;
- u32 version;
- u32 num_entries;
- u32 reserved[5];
+ u8 magic[4];
+ __le32 version;
+ __le32 num_entries;
+ __le32 reserved[5];
struct smem_ptable_entry entry[];
};
-#define SMEM_PTABLE_MAGIC 0x434f5424 /* "$TOC" */
+
+static const u8 SMEM_PTABLE_MAGIC[] = { 0x24, 0x54, 0x4f, 0x43 }; /* "$TOC" */
/**
* struct smem_partition_header - header of the partitions
* @reserved: for now reserved entries
*/
struct smem_partition_header {
- u32 magic;
- u16 host0;
- u16 host1;
- u32 size;
- u32 offset_free_uncached;
- u32 offset_free_cached;
- u32 reserved[3];
+ u8 magic[4];
+ __le16 host0;
+ __le16 host1;
+ __le32 size;
+ __le32 offset_free_uncached;
+ __le32 offset_free_cached;
+ __le32 reserved[3];
};
-#define SMEM_PART_MAGIC 0x54525024 /* "$PRT" */
+
+static const u8 SMEM_PART_MAGIC[] = { 0x24, 0x50, 0x52, 0x54 };
/**
* struct smem_private_entry - header of each item in the private partition
* @reserved: for now reserved entry
*/
struct smem_private_entry {
- u16 canary;
- u16 item;
- u32 size; /* includes padding bytes */
- u16 padding_data;
- u16 padding_hdr;
- u32 reserved;
+ u16 canary; /* bytes are the same so no swapping needed */
+ __le16 item;
+ __le32 size; /* includes padding bytes */
+ __le16 padding_data;
+ __le16 padding_hdr;
+ __le32 reserved;
};
#define SMEM_PRIVATE_CANARY 0xa5a5
struct smem_region regions[0];
};
+static struct smem_private_entry *
+phdr_to_last_private_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + le32_to_cpu(phdr->offset_free_uncached);
+}
+
+static void *phdr_to_first_cached_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + le32_to_cpu(phdr->offset_free_cached);
+}
+
+static struct smem_private_entry *
+phdr_to_first_private_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + sizeof(*phdr);
+}
+
+static struct smem_private_entry *
+private_entry_next(struct smem_private_entry *e)
+{
+ void *p = e;
+
+ return p + sizeof(*e) + le16_to_cpu(e->padding_hdr) +
+ le32_to_cpu(e->size);
+}
+
+static void *entry_to_item(struct smem_private_entry *e)
+{
+ void *p = e;
+
+ return p + sizeof(*e) + le16_to_cpu(e->padding_hdr);
+}
+
/* Pointer to the one and only smem handle */
static struct qcom_smem *__smem;
size_t size)
{
struct smem_partition_header *phdr;
- struct smem_private_entry *hdr;
+ struct smem_private_entry *hdr, *end;
size_t alloc_size;
- void *p;
+ void *cached;
phdr = smem->partitions[host];
+ hdr = phdr_to_first_private_entry(phdr);
+ end = phdr_to_last_private_entry(phdr);
+ cached = phdr_to_first_cached_entry(phdr);
- p = (void *)phdr + sizeof(*phdr);
- while (p < (void *)phdr + phdr->offset_free_uncached) {
- hdr = p;
-
+ while (hdr < end) {
if (hdr->canary != SMEM_PRIVATE_CANARY) {
dev_err(smem->dev,
"Found invalid canary in host %d partition\n",
return -EINVAL;
}
- if (hdr->item == item)
+ if (le16_to_cpu(hdr->item) == item)
return -EEXIST;
- p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ hdr = private_entry_next(hdr);
}
/* Check that we don't grow into the cached region */
alloc_size = sizeof(*hdr) + ALIGN(size, 8);
- if (p + alloc_size >= (void *)phdr + phdr->offset_free_cached) {
+ if ((void *)hdr + alloc_size >= cached) {
dev_err(smem->dev, "Out of memory\n");
return -ENOSPC;
}
- hdr = p;
hdr->canary = SMEM_PRIVATE_CANARY;
- hdr->item = item;
- hdr->size = ALIGN(size, 8);
- hdr->padding_data = hdr->size - size;
+ hdr->item = cpu_to_le16(item);
+ hdr->size = cpu_to_le32(ALIGN(size, 8));
+ hdr->padding_data = cpu_to_le16(le32_to_cpu(hdr->size) - size);
hdr->padding_hdr = 0;
/*
* gets a consistent view of the linked list.
*/
wmb();
- phdr->offset_free_uncached += alloc_size;
+ le32_add_cpu(&phdr->offset_free_uncached, alloc_size);
return 0;
}
return -EEXIST;
size = ALIGN(size, 8);
- if (WARN_ON(size > header->available))
+ if (WARN_ON(size > le32_to_cpu(header->available)))
return -ENOMEM;
entry->offset = header->free_offset;
- entry->size = size;
+ entry->size = cpu_to_le32(size);
/*
* Ensure the header is consistent before we mark the item allocated,
* even though they do not take the spinlock on read.
*/
wmb();
- entry->allocated = 1;
+ entry->allocated = cpu_to_le32(1);
- header->free_offset += size;
- header->available -= size;
+ le32_add_cpu(&header->free_offset, size);
+ le32_add_cpu(&header->available, -size);
return 0;
}
}
EXPORT_SYMBOL(qcom_smem_alloc);
-static int qcom_smem_get_global(struct qcom_smem *smem,
- unsigned item,
- void **ptr,
- size_t *size)
+static void *qcom_smem_get_global(struct qcom_smem *smem,
+ unsigned item,
+ size_t *size)
{
struct smem_header *header;
struct smem_region *area;
unsigned i;
if (WARN_ON(item >= SMEM_ITEM_COUNT))
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
header = smem->regions[0].virt_base;
entry = &header->toc[item];
if (!entry->allocated)
- return -ENXIO;
+ return ERR_PTR(-ENXIO);
- if (ptr != NULL) {
- aux_base = entry->aux_base & AUX_BASE_MASK;
+ aux_base = le32_to_cpu(entry->aux_base) & AUX_BASE_MASK;
- for (i = 0; i < smem->num_regions; i++) {
- area = &smem->regions[i];
+ for (i = 0; i < smem->num_regions; i++) {
+ area = &smem->regions[i];
- if (area->aux_base == aux_base || !aux_base) {
- *ptr = area->virt_base + entry->offset;
- break;
- }
+ if (area->aux_base == aux_base || !aux_base) {
+ if (size != NULL)
+ *size = le32_to_cpu(entry->size);
+ return area->virt_base + le32_to_cpu(entry->offset);
}
}
- if (size != NULL)
- *size = entry->size;
- return 0;
+ return ERR_PTR(-ENOENT);
}
-static int qcom_smem_get_private(struct qcom_smem *smem,
- unsigned host,
- unsigned item,
- void **ptr,
- size_t *size)
+static void *qcom_smem_get_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ size_t *size)
{
struct smem_partition_header *phdr;
- struct smem_private_entry *hdr;
- void *p;
+ struct smem_private_entry *e, *end;
phdr = smem->partitions[host];
+ e = phdr_to_first_private_entry(phdr);
+ end = phdr_to_last_private_entry(phdr);
- p = (void *)phdr + sizeof(*phdr);
- while (p < (void *)phdr + phdr->offset_free_uncached) {
- hdr = p;
-
- if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ while (e < end) {
+ if (e->canary != SMEM_PRIVATE_CANARY) {
dev_err(smem->dev,
"Found invalid canary in host %d partition\n",
host);
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
- if (hdr->item == item) {
- if (ptr != NULL)
- *ptr = p + sizeof(*hdr) + hdr->padding_hdr;
-
+ if (le16_to_cpu(e->item) == item) {
if (size != NULL)
- *size = hdr->size - hdr->padding_data;
+ *size = le32_to_cpu(e->size) -
+ le16_to_cpu(e->padding_data);
- return 0;
+ return entry_to_item(e);
}
- p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ e = private_entry_next(e);
}
- return -ENOENT;
+ return ERR_PTR(-ENOENT);
}
/**
* qcom_smem_get() - resolve ptr of size of a smem item
* @host: the remote processor, or -1
* @item: smem item handle
- * @ptr: pointer to be filled out with address of the item
* @size: pointer to be filled out with size of the item
*
- * Looks up pointer and size of a smem item.
+ * Looks up smem item and returns pointer to it. Size of smem
+ * item is returned in @size.
*/
-int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size)
+void *qcom_smem_get(unsigned host, unsigned item, size_t *size)
{
unsigned long flags;
int ret;
+ void *ptr = ERR_PTR(-EPROBE_DEFER);
if (!__smem)
- return -EPROBE_DEFER;
+ return ptr;
ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
HWSPINLOCK_TIMEOUT,
&flags);
if (ret)
- return ret;
+ return ERR_PTR(ret);
if (host < SMEM_HOST_COUNT && __smem->partitions[host])
- ret = qcom_smem_get_private(__smem, host, item, ptr, size);
+ ptr = qcom_smem_get_private(__smem, host, item, size);
else
- ret = qcom_smem_get_global(__smem, item, ptr, size);
+ ptr = qcom_smem_get_global(__smem, item, size);
hwspin_unlock_irqrestore(__smem->hwlock, &flags);
- return ret;
+
+ return ptr;
}
EXPORT_SYMBOL(qcom_smem_get);
if (host < SMEM_HOST_COUNT && __smem->partitions[host]) {
phdr = __smem->partitions[host];
- ret = phdr->offset_free_cached - phdr->offset_free_uncached;
+ ret = le32_to_cpu(phdr->offset_free_cached) -
+ le32_to_cpu(phdr->offset_free_uncached);
} else {
header = __smem->regions[0].virt_base;
- ret = header->available;
+ ret = le32_to_cpu(header->available);
}
return ret;
static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
{
- unsigned *versions;
+ __le32 *versions;
size_t size;
- int ret;
- ret = qcom_smem_get_global(smem, SMEM_ITEM_VERSION,
- (void **)&versions, &size);
- if (ret < 0) {
+ versions = qcom_smem_get_global(smem, SMEM_ITEM_VERSION, &size);
+ if (IS_ERR(versions)) {
dev_err(smem->dev, "Unable to read the version item\n");
return -ENOENT;
}
return -EINVAL;
}
- return versions[SMEM_MASTER_SBL_VERSION_INDEX];
+ return le32_to_cpu(versions[SMEM_MASTER_SBL_VERSION_INDEX]);
}
static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
struct smem_ptable_entry *entry;
struct smem_ptable *ptable;
unsigned remote_host;
+ u32 version, host0, host1;
int i;
ptable = smem->regions[0].virt_base + smem->regions[0].size - SZ_4K;
- if (ptable->magic != SMEM_PTABLE_MAGIC)
+ if (memcmp(ptable->magic, SMEM_PTABLE_MAGIC, sizeof(ptable->magic)))
return 0;
- if (ptable->version != 1) {
+ version = le32_to_cpu(ptable->version);
+ if (version != 1) {
dev_err(smem->dev,
- "Unsupported partition header version %d\n",
- ptable->version);
+ "Unsupported partition header version %d\n", version);
return -EINVAL;
}
- for (i = 0; i < ptable->num_entries; i++) {
+ for (i = 0; i < le32_to_cpu(ptable->num_entries); i++) {
entry = &ptable->entry[i];
+ host0 = le16_to_cpu(entry->host0);
+ host1 = le16_to_cpu(entry->host1);
- if (entry->host0 != local_host && entry->host1 != local_host)
+ if (host0 != local_host && host1 != local_host)
continue;
- if (!entry->offset)
+ if (!le32_to_cpu(entry->offset))
continue;
- if (!entry->size)
+ if (!le32_to_cpu(entry->size))
continue;
- if (entry->host0 == local_host)
- remote_host = entry->host1;
+ if (host0 == local_host)
+ remote_host = host1;
else
- remote_host = entry->host0;
+ remote_host = host0;
if (remote_host >= SMEM_HOST_COUNT) {
dev_err(smem->dev,
return -EINVAL;
}
- header = smem->regions[0].virt_base + entry->offset;
+ header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
+ host0 = le16_to_cpu(header->host0);
+ host1 = le16_to_cpu(header->host1);
- if (header->magic != SMEM_PART_MAGIC) {
+ if (memcmp(header->magic, SMEM_PART_MAGIC,
+ sizeof(header->magic))) {
dev_err(smem->dev,
"Partition %d has invalid magic\n", i);
return -EINVAL;
}
- if (header->host0 != local_host && header->host1 != local_host) {
+ if (host0 != local_host && host1 != local_host) {
dev_err(smem->dev,
"Partition %d hosts are invalid\n", i);
return -EINVAL;
}
- if (header->host0 != remote_host && header->host1 != remote_host) {
+ if (host0 != remote_host && host1 != remote_host) {
dev_err(smem->dev,
"Partition %d hosts are invalid\n", i);
return -EINVAL;
return -EINVAL;
}
- if (header->offset_free_uncached > header->size) {
+ if (le32_to_cpu(header->offset_free_uncached) > le32_to_cpu(header->size)) {
dev_err(smem->dev,
"Partition %d has invalid free pointer\n", i);
return -EINVAL;
return 0;
}
-static int qcom_smem_count_mem_regions(struct platform_device *pdev)
+static int qcom_smem_map_memory(struct qcom_smem *smem, struct device *dev,
+ const char *name, int i)
{
- struct resource *res;
- int num_regions = 0;
- int i;
-
- for (i = 0; i < pdev->num_resources; i++) {
- res = &pdev->resource[i];
+ struct device_node *np;
+ struct resource r;
+ int ret;
- if (resource_type(res) == IORESOURCE_MEM)
- num_regions++;
+ np = of_parse_phandle(dev->of_node, name, 0);
+ if (!np) {
+ dev_err(dev, "No %s specified\n", name);
+ return -EINVAL;
}
- return num_regions;
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (ret)
+ return ret;
+
+ smem->regions[i].aux_base = (u32)r.start;
+ smem->regions[i].size = resource_size(&r);
+ smem->regions[i].virt_base = devm_ioremap_nocache(dev, r.start,
+ resource_size(&r));
+ if (!smem->regions[i].virt_base)
+ return -ENOMEM;
+
+ return 0;
}
static int qcom_smem_probe(struct platform_device *pdev)
{
struct smem_header *header;
- struct device_node *np;
struct qcom_smem *smem;
- struct resource *res;
- struct resource r;
size_t array_size;
- int num_regions = 0;
+ int num_regions;
int hwlock_id;
u32 version;
int ret;
- int i;
- num_regions = qcom_smem_count_mem_regions(pdev) + 1;
+ num_regions = 1;
+ if (of_find_property(pdev->dev.of_node, "qcom,rpm-msg-ram", NULL))
+ num_regions++;
array_size = num_regions * sizeof(struct smem_region);
smem = devm_kzalloc(&pdev->dev, sizeof(*smem) + array_size, GFP_KERNEL);
smem->dev = &pdev->dev;
smem->num_regions = num_regions;
- np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
- if (!np) {
- dev_err(&pdev->dev, "No memory-region specified\n");
- return -EINVAL;
- }
-
- ret = of_address_to_resource(np, 0, &r);
- of_node_put(np);
+ ret = qcom_smem_map_memory(smem, &pdev->dev, "memory-region", 0);
if (ret)
return ret;
- smem->regions[0].aux_base = (u32)r.start;
- smem->regions[0].size = resource_size(&r);
- smem->regions[0].virt_base = devm_ioremap_nocache(&pdev->dev,
- r.start,
- resource_size(&r));
- if (!smem->regions[0].virt_base)
- return -ENOMEM;
-
- for (i = 1; i < num_regions; i++) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i - 1);
-
- smem->regions[i].aux_base = (u32)res->start;
- smem->regions[i].size = resource_size(res);
- smem->regions[i].virt_base = devm_ioremap_nocache(&pdev->dev,
- res->start,
- resource_size(res));
- if (!smem->regions[i].virt_base)
- return -ENOMEM;
- }
+ if (num_regions > 1 && (ret = qcom_smem_map_memory(smem, &pdev->dev,
+ "qcom,rpm-msg-ram", 1)))
+ return ret;
header = smem->regions[0].virt_base;
- if (header->initialized != 1 || header->reserved) {
+ if (le32_to_cpu(header->initialized) != 1 ||
+ le32_to_cpu(header->reserved)) {
dev_err(&pdev->dev, "SMEM is not initialized by SBL\n");
return -EINVAL;
}
static int qcom_smem_remove(struct platform_device *pdev)
{
- __smem = NULL;
hwspin_lock_free(__smem->hwlock);
+ __smem = NULL;
return 0;
}
--- /dev/null
+if ARCH_ROCKCHIP || COMPILE_TEST
+
+#
+# Rockchip Soc drivers
+#
+config ROCKCHIP_PM_DOMAINS
+ bool "Rockchip generic power domain"
+ depends on PM
+ select PM_GENERIC_DOMAINS
+ help
+ Say y here to enable power domain support.
+ In order to meet high performance and low power requirements, a power
+ management unit is designed or saving power when RK3288 in low power
+ mode. The RK3288 PMU is dedicated for managing the power of the whole chip.
+
+ If unsure, say N.
+
+endif
--- /dev/null
+#
+# Rockchip Soc drivers
+#
+obj-$(CONFIG_ROCKCHIP_PM_DOMAINS) += pm_domains.o
--- /dev/null
+/*
+ * Rockchip Generic power domain support.
+ *
+ * Copyright (c) 2015 ROCKCHIP, Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/power/rk3288-power.h>
+
+struct rockchip_domain_info {
+ int pwr_mask;
+ int status_mask;
+ int req_mask;
+ int idle_mask;
+ int ack_mask;
+};
+
+struct rockchip_pmu_info {
+ u32 pwr_offset;
+ u32 status_offset;
+ u32 req_offset;
+ u32 idle_offset;
+ u32 ack_offset;
+
+ u32 core_pwrcnt_offset;
+ u32 gpu_pwrcnt_offset;
+
+ unsigned int core_power_transition_time;
+ unsigned int gpu_power_transition_time;
+
+ int num_domains;
+ const struct rockchip_domain_info *domain_info;
+};
+
+struct rockchip_pm_domain {
+ struct generic_pm_domain genpd;
+ const struct rockchip_domain_info *info;
+ struct rockchip_pmu *pmu;
+ int num_clks;
+ struct clk *clks[];
+};
+
+struct rockchip_pmu {
+ struct device *dev;
+ struct regmap *regmap;
+ const struct rockchip_pmu_info *info;
+ struct mutex mutex; /* mutex lock for pmu */
+ struct genpd_onecell_data genpd_data;
+ struct generic_pm_domain *domains[];
+};
+
+#define to_rockchip_pd(gpd) container_of(gpd, struct rockchip_pm_domain, genpd)
+
+#define DOMAIN(pwr, status, req, idle, ack) \
+{ \
+ .pwr_mask = BIT(pwr), \
+ .status_mask = BIT(status), \
+ .req_mask = BIT(req), \
+ .idle_mask = BIT(idle), \
+ .ack_mask = BIT(ack), \
+}
+
+#define DOMAIN_RK3288(pwr, status, req) \
+ DOMAIN(pwr, status, req, req, (req) + 16)
+
+static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+ const struct rockchip_domain_info *pd_info = pd->info;
+ unsigned int val;
+
+ regmap_read(pmu->regmap, pmu->info->idle_offset, &val);
+ return (val & pd_info->idle_mask) == pd_info->idle_mask;
+}
+
+static int rockchip_pmu_set_idle_request(struct rockchip_pm_domain *pd,
+ bool idle)
+{
+ const struct rockchip_domain_info *pd_info = pd->info;
+ struct rockchip_pmu *pmu = pd->pmu;
+ unsigned int val;
+
+ regmap_update_bits(pmu->regmap, pmu->info->req_offset,
+ pd_info->req_mask, idle ? -1U : 0);
+
+ dsb(sy);
+
+ do {
+ regmap_read(pmu->regmap, pmu->info->ack_offset, &val);
+ } while ((val & pd_info->ack_mask) != (idle ? pd_info->ack_mask : 0));
+
+ while (rockchip_pmu_domain_is_idle(pd) != idle)
+ cpu_relax();
+
+ return 0;
+}
+
+static bool rockchip_pmu_domain_is_on(struct rockchip_pm_domain *pd)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+ unsigned int val;
+
+ regmap_read(pmu->regmap, pmu->info->status_offset, &val);
+
+ /* 1'b0: power on, 1'b1: power off */
+ return !(val & pd->info->status_mask);
+}
+
+static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd,
+ bool on)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+
+ regmap_update_bits(pmu->regmap, pmu->info->pwr_offset,
+ pd->info->pwr_mask, on ? 0 : -1U);
+
+ dsb(sy);
+
+ while (rockchip_pmu_domain_is_on(pd) != on)
+ cpu_relax();
+}
+
+static int rockchip_pd_power(struct rockchip_pm_domain *pd, bool power_on)
+{
+ int i;
+
+ mutex_lock(&pd->pmu->mutex);
+
+ if (rockchip_pmu_domain_is_on(pd) != power_on) {
+ for (i = 0; i < pd->num_clks; i++)
+ clk_enable(pd->clks[i]);
+
+ if (!power_on) {
+ /* FIXME: add code to save AXI_QOS */
+
+ /* if powering down, idle request to NIU first */
+ rockchip_pmu_set_idle_request(pd, true);
+ }
+
+ rockchip_do_pmu_set_power_domain(pd, power_on);
+
+ if (power_on) {
+ /* if powering up, leave idle mode */
+ rockchip_pmu_set_idle_request(pd, false);
+
+ /* FIXME: add code to restore AXI_QOS */
+ }
+
+ for (i = pd->num_clks - 1; i >= 0; i--)
+ clk_disable(pd->clks[i]);
+ }
+
+ mutex_unlock(&pd->pmu->mutex);
+ return 0;
+}
+
+static int rockchip_pd_power_on(struct generic_pm_domain *domain)
+{
+ struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
+
+ return rockchip_pd_power(pd, true);
+}
+
+static int rockchip_pd_power_off(struct generic_pm_domain *domain)
+{
+ struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
+
+ return rockchip_pd_power(pd, false);
+}
+
+static int rockchip_pd_attach_dev(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ struct clk *clk;
+ int i;
+ int error;
+
+ dev_dbg(dev, "attaching to power domain '%s'\n", genpd->name);
+
+ error = pm_clk_create(dev);
+ if (error) {
+ dev_err(dev, "pm_clk_create failed %d\n", error);
+ return error;
+ }
+
+ i = 0;
+ while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) {
+ dev_dbg(dev, "adding clock '%pC' to list of PM clocks\n", clk);
+ error = pm_clk_add_clk(dev, clk);
+ if (error) {
+ dev_err(dev, "pm_clk_add_clk failed %d\n", error);
+ clk_put(clk);
+ pm_clk_destroy(dev);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+static void rockchip_pd_detach_dev(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ dev_dbg(dev, "detaching from power domain '%s'\n", genpd->name);
+
+ pm_clk_destroy(dev);
+}
+
+static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
+ struct device_node *node)
+{
+ const struct rockchip_domain_info *pd_info;
+ struct rockchip_pm_domain *pd;
+ struct clk *clk;
+ int clk_cnt;
+ int i;
+ u32 id;
+ int error;
+
+ error = of_property_read_u32(node, "reg", &id);
+ if (error) {
+ dev_err(pmu->dev,
+ "%s: failed to retrieve domain id (reg): %d\n",
+ node->name, error);
+ return -EINVAL;
+ }
+
+ if (id >= pmu->info->num_domains) {
+ dev_err(pmu->dev, "%s: invalid domain id %d\n",
+ node->name, id);
+ return -EINVAL;
+ }
+
+ pd_info = &pmu->info->domain_info[id];
+ if (!pd_info) {
+ dev_err(pmu->dev, "%s: undefined domain id %d\n",
+ node->name, id);
+ return -EINVAL;
+ }
+
+ clk_cnt = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+ pd = devm_kzalloc(pmu->dev,
+ sizeof(*pd) + clk_cnt * sizeof(pd->clks[0]),
+ GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ pd->info = pd_info;
+ pd->pmu = pmu;
+
+ for (i = 0; i < clk_cnt; i++) {
+ clk = of_clk_get(node, i);
+ if (IS_ERR(clk)) {
+ error = PTR_ERR(clk);
+ dev_err(pmu->dev,
+ "%s: failed to get clk at index %d: %d\n",
+ node->name, i, error);
+ goto err_out;
+ }
+
+ error = clk_prepare(clk);
+ if (error) {
+ dev_err(pmu->dev,
+ "%s: failed to prepare clk %pC (index %d): %d\n",
+ node->name, clk, i, error);
+ clk_put(clk);
+ goto err_out;
+ }
+
+ pd->clks[pd->num_clks++] = clk;
+
+ dev_dbg(pmu->dev, "added clock '%pC' to domain '%s'\n",
+ clk, node->name);
+ }
+
+ error = rockchip_pd_power(pd, true);
+ if (error) {
+ dev_err(pmu->dev,
+ "failed to power on domain '%s': %d\n",
+ node->name, error);
+ goto err_out;
+ }
+
+ pd->genpd.name = node->name;
+ pd->genpd.power_off = rockchip_pd_power_off;
+ pd->genpd.power_on = rockchip_pd_power_on;
+ pd->genpd.attach_dev = rockchip_pd_attach_dev;
+ pd->genpd.detach_dev = rockchip_pd_detach_dev;
+ pd->genpd.flags = GENPD_FLAG_PM_CLK;
+ pm_genpd_init(&pd->genpd, NULL, false);
+
+ pmu->genpd_data.domains[id] = &pd->genpd;
+ return 0;
+
+err_out:
+ while (--i >= 0) {
+ clk_unprepare(pd->clks[i]);
+ clk_put(pd->clks[i]);
+ }
+ return error;
+}
+
+static void rockchip_pm_remove_one_domain(struct rockchip_pm_domain *pd)
+{
+ int i;
+
+ for (i = 0; i < pd->num_clks; i++) {
+ clk_unprepare(pd->clks[i]);
+ clk_put(pd->clks[i]);
+ }
+
+ /* protect the zeroing of pm->num_clks */
+ mutex_lock(&pd->pmu->mutex);
+ pd->num_clks = 0;
+ mutex_unlock(&pd->pmu->mutex);
+
+ /* devm will free our memory */
+}
+
+static void rockchip_pm_domain_cleanup(struct rockchip_pmu *pmu)
+{
+ struct generic_pm_domain *genpd;
+ struct rockchip_pm_domain *pd;
+ int i;
+
+ for (i = 0; i < pmu->genpd_data.num_domains; i++) {
+ genpd = pmu->genpd_data.domains[i];
+ if (genpd) {
+ pd = to_rockchip_pd(genpd);
+ rockchip_pm_remove_one_domain(pd);
+ }
+ }
+
+ /* devm will free our memory */
+}
+
+static void rockchip_configure_pd_cnt(struct rockchip_pmu *pmu,
+ u32 domain_reg_offset,
+ unsigned int count)
+{
+ /* First configure domain power down transition count ... */
+ regmap_write(pmu->regmap, domain_reg_offset, count);
+ /* ... and then power up count. */
+ regmap_write(pmu->regmap, domain_reg_offset + 4, count);
+}
+
+static int rockchip_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *node;
+ struct device *parent;
+ struct rockchip_pmu *pmu;
+ const struct of_device_id *match;
+ const struct rockchip_pmu_info *pmu_info;
+ int error;
+
+ if (!np) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "missing pmu data\n");
+ return -EINVAL;
+ }
+
+ pmu_info = match->data;
+
+ pmu = devm_kzalloc(dev,
+ sizeof(*pmu) +
+ pmu_info->num_domains * sizeof(pmu->domains[0]),
+ GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ pmu->dev = &pdev->dev;
+ mutex_init(&pmu->mutex);
+
+ pmu->info = pmu_info;
+
+ pmu->genpd_data.domains = pmu->domains;
+ pmu->genpd_data.num_domains = pmu_info->num_domains;
+
+ parent = dev->parent;
+ if (!parent) {
+ dev_err(dev, "no parent for syscon devices\n");
+ return -ENODEV;
+ }
+
+ pmu->regmap = syscon_node_to_regmap(parent->of_node);
+
+ /*
+ * Configure power up and down transition delays for CORE
+ * and GPU domains.
+ */
+ rockchip_configure_pd_cnt(pmu, pmu_info->core_pwrcnt_offset,
+ pmu_info->core_power_transition_time);
+ rockchip_configure_pd_cnt(pmu, pmu_info->gpu_pwrcnt_offset,
+ pmu_info->gpu_power_transition_time);
+
+ error = -ENODEV;
+
+ for_each_available_child_of_node(np, node) {
+ error = rockchip_pm_add_one_domain(pmu, node);
+ if (error) {
+ dev_err(dev, "failed to handle node %s: %d\n",
+ node->name, error);
+ goto err_out;
+ }
+ }
+
+ if (error) {
+ dev_dbg(dev, "no power domains defined\n");
+ goto err_out;
+ }
+
+ of_genpd_add_provider_onecell(np, &pmu->genpd_data);
+
+ return 0;
+
+err_out:
+ rockchip_pm_domain_cleanup(pmu);
+ return error;
+}
+
+static const struct rockchip_domain_info rk3288_pm_domains[] = {
+ [RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4),
+ [RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9),
+ [RK3288_PD_VIDEO] = DOMAIN_RK3288(8, 8, 3),
+ [RK3288_PD_GPU] = DOMAIN_RK3288(9, 9, 2),
+};
+
+static const struct rockchip_pmu_info rk3288_pmu = {
+ .pwr_offset = 0x08,
+ .status_offset = 0x0c,
+ .req_offset = 0x10,
+ .idle_offset = 0x14,
+ .ack_offset = 0x14,
+
+ .core_pwrcnt_offset = 0x34,
+ .gpu_pwrcnt_offset = 0x3c,
+
+ .core_power_transition_time = 24, /* 1us */
+ .gpu_power_transition_time = 24, /* 1us */
+
+ .num_domains = ARRAY_SIZE(rk3288_pm_domains),
+ .domain_info = rk3288_pm_domains,
+};
+
+static const struct of_device_id rockchip_pm_domain_dt_match[] = {
+ {
+ .compatible = "rockchip,rk3288-power-controller",
+ .data = (void *)&rk3288_pmu,
+ },
+ { /* sentinel */ },
+};
+
+static struct platform_driver rockchip_pm_domain_driver = {
+ .probe = rockchip_pm_domain_probe,
+ .driver = {
+ .name = "rockchip-pm-domain",
+ .of_match_table = rockchip_pm_domain_dt_match,
+ /*
+ * We can't forcibly eject devices form power domain,
+ * so we can't really remove power domains once they
+ * were added.
+ */
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init rockchip_pm_domain_drv_register(void)
+{
+ return platform_driver_register(&rockchip_pm_domain_driver);
+}
+postcore_initcall(rockchip_pm_domain_drv_register);
--- /dev/null
+#
+# SAMSUNG SoC drivers
+#
+menu "Samsung SOC driver support"
+
+config SOC_SAMSUNG
+ bool
+
+config EXYNOS_SROM
+ bool
+ depends on ARM && ARCH_EXYNOS && PM
+
+endmenu
--- /dev/null
+obj-$(CONFIG_EXYNOS_SROM) += exynos-srom.o
--- /dev/null
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS - SROM Controller support
+ * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "exynos-srom.h"
+
+static const unsigned long exynos_srom_offsets[] = {
+ /* SROM side */
+ EXYNOS_SROM_BW,
+ EXYNOS_SROM_BC0,
+ EXYNOS_SROM_BC1,
+ EXYNOS_SROM_BC2,
+ EXYNOS_SROM_BC3,
+};
+
+/**
+ * struct exynos_srom_reg_dump: register dump of SROM Controller registers.
+ * @offset: srom register offset from the controller base address.
+ * @value: the value of register under the offset.
+ */
+struct exynos_srom_reg_dump {
+ u32 offset;
+ u32 value;
+};
+
+/**
+ * struct exynos_srom: platform data for exynos srom controller driver.
+ * @dev: platform device pointer
+ * @reg_base: srom base address
+ * @reg_offset: exynos_srom_reg_dump pointer to hold offset and its value.
+ */
+struct exynos_srom {
+ struct device *dev;
+ void __iomem *reg_base;
+ struct exynos_srom_reg_dump *reg_offset;
+};
+
+static struct exynos_srom_reg_dump *exynos_srom_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump)
+{
+ struct exynos_srom_reg_dump *rd;
+ unsigned int i;
+
+ rd = kcalloc(nr_rdump, sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return NULL;
+
+ for (i = 0; i < nr_rdump; ++i)
+ rd[i].offset = rdump[i];
+
+ return rd;
+}
+
+static int exynos_srom_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct exynos_srom *srom;
+ struct device *dev = &pdev->dev;
+
+ np = dev->of_node;
+ if (!np) {
+ dev_err(&pdev->dev, "could not find device info\n");
+ return -EINVAL;
+ }
+
+ srom = devm_kzalloc(&pdev->dev,
+ sizeof(struct exynos_srom), GFP_KERNEL);
+ if (!srom)
+ return -ENOMEM;
+
+ srom->dev = dev;
+ srom->reg_base = of_iomap(np, 0);
+ if (!srom->reg_base) {
+ dev_err(&pdev->dev, "iomap of exynos srom controller failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, srom);
+
+ srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets,
+ sizeof(exynos_srom_offsets));
+ if (!srom->reg_offset) {
+ iounmap(srom->reg_base);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int exynos_srom_remove(struct platform_device *pdev)
+{
+ struct exynos_srom *srom = platform_get_drvdata(pdev);
+
+ kfree(srom->reg_offset);
+ iounmap(srom->reg_base);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void exynos_srom_save(void __iomem *base,
+ struct exynos_srom_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ rd->value = readl(base + rd->offset);
+}
+
+static void exynos_srom_restore(void __iomem *base,
+ const struct exynos_srom_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ writel(rd->value, base + rd->offset);
+}
+
+static int exynos_srom_suspend(struct device *dev)
+{
+ struct exynos_srom *srom = dev_get_drvdata(dev);
+
+ exynos_srom_save(srom->reg_base, srom->reg_offset,
+ ARRAY_SIZE(exynos_srom_offsets));
+ return 0;
+}
+
+static int exynos_srom_resume(struct device *dev)
+{
+ struct exynos_srom *srom = dev_get_drvdata(dev);
+
+ exynos_srom_restore(srom->reg_base, srom->reg_offset,
+ ARRAY_SIZE(exynos_srom_offsets));
+ return 0;
+}
+#endif
+
+static const struct of_device_id of_exynos_srom_ids[] = {
+ {
+ .compatible = "samsung,exynos-srom",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_exynos_srom_ids);
+
+static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
+
+static struct platform_driver exynos_srom_driver = {
+ .probe = exynos_srom_probe,
+ .remove = exynos_srom_remove,
+ .driver = {
+ .name = "exynos-srom",
+ .of_match_table = of_exynos_srom_ids,
+ .pm = &exynos_srom_pm_ops,
+ },
+};
+module_platform_driver(exynos_srom_driver);
+
+MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
+MODULE_DESCRIPTION("Exynos SROM Controller Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Exynos SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __EXYNOS_SROM_H
+#define __EXYNOS_SROM_H __FILE__
+
+#define EXYNOS_SROMREG(x) (x)
+
+#define EXYNOS_SROM_BW EXYNOS_SROMREG(0x0)
+#define EXYNOS_SROM_BC0 EXYNOS_SROMREG(0x4)
+#define EXYNOS_SROM_BC1 EXYNOS_SROMREG(0x8)
+#define EXYNOS_SROM_BC2 EXYNOS_SROMREG(0xc)
+#define EXYNOS_SROM_BC3 EXYNOS_SROMREG(0x10)
+#define EXYNOS_SROM_BC4 EXYNOS_SROMREG(0x14)
+#define EXYNOS_SROM_BC5 EXYNOS_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define EXYNOS_SROM_BW__DATAWIDTH__SHIFT 0
+#define EXYNOS_SROM_BW__ADDRMODE__SHIFT 1
+#define EXYNOS_SROM_BW__WAITENABLE__SHIFT 2
+#define EXYNOS_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define EXYNOS_SROM_BW__CS_MASK 0xf
+
+#define EXYNOS_SROM_BW__NCS0__SHIFT 0
+#define EXYNOS_SROM_BW__NCS1__SHIFT 4
+#define EXYNOS_SROM_BW__NCS2__SHIFT 8
+#define EXYNOS_SROM_BW__NCS3__SHIFT 12
+#define EXYNOS_SROM_BW__NCS4__SHIFT 16
+#define EXYNOS_SROM_BW__NCS5__SHIFT 20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define EXYNOS_SROM_BCX__PMC__SHIFT 0
+#define EXYNOS_SROM_BCX__TACP__SHIFT 4
+#define EXYNOS_SROM_BCX__TCAH__SHIFT 8
+#define EXYNOS_SROM_BCX__TCOH__SHIFT 12
+#define EXYNOS_SROM_BCX__TACC__SHIFT 16
+#define EXYNOS_SROM_BCX__TCOS__SHIFT 24
+#define EXYNOS_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __EXYNOS_SROM_H */
};
void __iomem *intd;
u32 __iomem *iram;
- const char *firmware;
u32 id;
struct list_head list;
+ bool loaded;
+ bool started;
};
struct knav_qmgr_info {
if (old && !new) {
dev_dbg(kdev->dev, "setup-acc-irq: freeing %s for channel %s\n",
acc->name, acc->name);
+ ret = irq_set_affinity_hint(irq, NULL);
+ if (ret)
+ dev_warn(range->kdev->dev,
+ "Failed to set IRQ affinity\n");
free_irq(irq, range);
}
* Return 0 on success or error
*/
int knav_init_acc_range(struct knav_device *kdev,
- struct device_node *node,
- struct knav_range_info *range)
+ struct device_node *node,
+ struct knav_range_info *range)
{
struct knav_acc_channel *acc;
struct knav_pdsp_info *pdsp;
return -EINVAL;
}
+ if (!pdsp->started) {
+ dev_err(kdev->dev, "pdsp id %d not started for range %s\n",
+ info->pdsp_id, range->name);
+ return -ENODEV;
+ }
+
info->pdsp = pdsp;
channels = range->num_queues;
if (of_get_property(node, "multi-queue", NULL)) {
idx < (kdev)->num_queues_in_use; \
idx++, inst = knav_queue_idx_to_inst(kdev, idx))
+/* All firmware file names end up here. List the firmware file names below.
+ * Newest followed by older ones. Search is done from start of the array
+ * until a firmware file is found.
+ */
+const char *knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
+
/**
* knav_queue_notify: qmss queue notfier call
*
struct device *dev = kdev->dev;
struct knav_pdsp_info *pdsp;
struct device_node *child;
- int ret;
for_each_child_of_node(pdsps, child) {
pdsp = devm_kzalloc(dev, sizeof(*pdsp), GFP_KERNEL);
return -ENOMEM;
}
pdsp->name = knav_queue_find_name(child);
- ret = of_property_read_string(child, "firmware",
- &pdsp->firmware);
- if (ret < 0 || !pdsp->firmware) {
- dev_err(dev, "unknown firmware for pdsp %s\n",
- pdsp->name);
- devm_kfree(dev, pdsp);
- continue;
- }
- dev_dbg(dev, "pdsp name %s fw name :%s\n", pdsp->name,
- pdsp->firmware);
-
pdsp->iram =
knav_queue_map_reg(kdev, child,
KNAV_QUEUE_PDSP_IRAM_REG_INDEX);
}
of_property_read_u32(child, "id", &pdsp->id);
list_add_tail(&pdsp->list, &kdev->pdsps);
- dev_dbg(dev, "added pdsp %s: command %p, iram %p, regs %p, intd %p, firmware %s\n",
+ dev_dbg(dev, "added pdsp %s: command %p, iram %p, regs %p, intd %p\n",
pdsp->name, pdsp->command, pdsp->iram, pdsp->regs,
- pdsp->intd, pdsp->firmware);
+ pdsp->intd);
}
return 0;
}
dev_err(kdev->dev, "timed out on pdsp %s stop\n", pdsp->name);
return ret;
}
+ pdsp->loaded = false;
+ pdsp->started = false;
return 0;
}
{
int i, ret, fwlen;
const struct firmware *fw;
+ bool found = false;
u32 *fwdata;
- ret = request_firmware(&fw, pdsp->firmware, kdev->dev);
- if (ret) {
- dev_err(kdev->dev, "failed to get firmware %s for pdsp %s\n",
- pdsp->firmware, pdsp->name);
- return ret;
+ for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) {
+ if (knav_acc_firmwares[i]) {
+ ret = request_firmware_direct(&fw,
+ knav_acc_firmwares[i],
+ kdev->dev);
+ if (!ret) {
+ found = true;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ dev_err(kdev->dev, "failed to get firmware for pdsp\n");
+ return -ENODEV;
}
+
+ dev_info(kdev->dev, "firmware file %s downloaded for PDSP\n",
+ knav_acc_firmwares[i]);
+
writel_relaxed(pdsp->id + 1, pdsp->command + 0x18);
/* download the firmware */
fwdata = (u32 *)fw->data;
int ret;
knav_queue_stop_pdsps(kdev);
- /* now load them all */
+ /* now load them all. We return success even if pdsp
+ * is not loaded as acc channels are optional on having
+ * firmware availability in the system. We set the loaded
+ * and stated flag and when initialize the acc range, check
+ * it and init the range only if pdsp is started.
+ */
for_each_pdsp(kdev, pdsp) {
ret = knav_queue_load_pdsp(kdev, pdsp);
- if (ret < 0)
- return ret;
+ if (!ret)
+ pdsp->loaded = true;
}
for_each_pdsp(kdev, pdsp) {
- ret = knav_queue_start_pdsp(kdev, pdsp);
- WARN_ON(ret);
+ if (pdsp->loaded) {
+ ret = knav_queue_start_pdsp(kdev, pdsp);
+ if (!ret)
+ pdsp->started = true;
+ }
}
return 0;
}
if (ret)
goto error_ret;
- for (i = 0; i < num_read; i++)
+ for (i = 0; i < num_read / sizeof(u16); i++)
*(((u16 *)rx) + i) = be16_to_cpup((__be16 *)rx + i);
if (copy_to_user(buf, rx, num_read))
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
/* The calculated value from the ADC is in Kelvin, we
- * want Celsius for hwmon so the offset is
- * -272.15 * scale
+ * want Celsius for hwmon so the offset is -273.15
+ * The offset is applied before scaling so it is
+ * actually -213.15 * 4 / 1.012 = -1079.644268
*/
- *val = -1075;
- *val2 = 691699;
+ *val = -1079;
+ *val2 = 644268;
return IIO_VAL_INT_PLUS_MICRO;
}
prefetchw(&page->flags);
ret = add_to_page_cache_lru(page, inode->i_mapping, offset,
- GFP_KERNEL);
+ GFP_NOFS);
if (ret == 0) {
unlock_page(page);
} else {
__this_cpu_write(reporting_keystroke, true);
input_report_key(virt_keyboard, KEY_DOWN, PRESSED);
input_report_key(virt_keyboard, KEY_DOWN, RELEASED);
+ input_sync(virt_keyboard);
__this_cpu_write(reporting_keystroke, false);
/* reenable preemption */
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
- if (data->soc == SOC_ARCH_EXYNOS5433)
+ else if (data->soc == SOC_ARCH_EXYNOS5433)
emul_con = EXYNOS5433_TMU_EMUL_CON;
else if (data->soc == SOC_ARCH_EXYNOS7)
emul_con = EXYNOS7_TMU_REG_EMUL_CON;
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <asm-generic/bug.h>
+#include <linux/bug.h>
#include "n_tracesink.h"
/*
#include <linux/tty_ldisc.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <asm-generic/bug.h>
+#include <linux/bug.h>
#include "n_tracesink.h"
/*
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHREAD;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- if (waitqueue_active(&tty->link->read_wait))
- wake_up_interruptible(&tty->link->read_wait);
+ wake_up_interruptible(&tty->link->read_wait);
}
}
put_tty_queue(c, ldata);
smp_store_release(&ldata->canon_head, ldata->read_head);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
- if (waitqueue_active(&tty->read_wait))
- wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+ wake_up_interruptible_poll(&tty->read_wait, POLLIN);
return 0;
}
}
if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
- if (waitqueue_active(&tty->read_wait))
- wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+ wake_up_interruptible_poll(&tty->read_wait, POLLIN);
}
}
}
/* The termios change make the tty ready for I/O */
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
- if (waitqueue_active(&tty->read_wait))
- wake_up_interruptible(&tty->read_wait);
+ wake_up_interruptible(&tty->write_wait);
+ wake_up_interruptible(&tty->read_wait);
}
/**
return 0;
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (dma->tx_size < p->port.fifosize) {
- ret = -EINVAL;
- goto err;
- }
desc = dmaengine_prep_slave_single(dma->txchan,
dma->tx_addr + xmit->tail,
UART_FCR7_64BYTE,
.flags = UART_CAP_FIFO,
},
+ [PORT_RT2880] = {
+ .name = "Palmchip BK-3103",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
ret = atmel_init_gpios(port, &pdev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to initialize GPIOs.");
- goto err;
+ goto err_clear_bit;
}
ret = atmel_init_port(port, pdev);
int locked = 1;
int retval;
- retval = clk_prepare_enable(sport->clk_per);
+ retval = clk_enable(sport->clk_per);
if (retval)
return;
- retval = clk_prepare_enable(sport->clk_ipg);
+ retval = clk_enable(sport->clk_ipg);
if (retval) {
- clk_disable_unprepare(sport->clk_per);
+ clk_disable(sport->clk_per);
return;
}
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
- clk_disable_unprepare(sport->clk_ipg);
- clk_disable_unprepare(sport->clk_per);
+ clk_disable(sport->clk_ipg);
+ clk_disable(sport->clk_per);
}
/*
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
- clk_disable_unprepare(sport->clk_ipg);
+ clk_disable(sport->clk_ipg);
+ if (retval) {
+ clk_unprepare(sport->clk_ipg);
+ goto error_console;
+ }
+
+ retval = clk_prepare(sport->clk_per);
+ if (retval)
+ clk_disable_unprepare(sport->clk_ipg);
error_console:
return retval;
return 0;
}
-struct tty_driver *mux_console_device(struct console *co, int *index)
-{
- *index = co->index;
- return mux_driver.tty_driver;
-}
-
static struct console mux_console = {
.name = "ttyB",
.write = mux_console_write,
- .device = mux_console_device,
+ .device = uart_console_device,
.setup = mux_console_setup,
.flags = CON_ENABLED | CON_PRINTBUFFER,
.index = 0,
+ .data = &mux_driver,
};
#define MUX_CONSOLE &mux_console
atomic_inc(&buf->priority);
mutex_lock(&buf->lock);
- while ((next = buf->head->next) != NULL) {
+ /* paired w/ release in __tty_buffer_request_room; ensures there are
+ * no pending memory accesses to the freed buffer
+ */
+ while ((next = smp_load_acquire(&buf->head->next)) != NULL) {
tty_buffer_free(port, buf->head);
buf->head = next;
}
if (n != NULL) {
n->flags = flags;
buf->tail = n;
- b->commit = b->used;
+ /* paired w/ acquire in flush_to_ldisc(); ensures
+ * flush_to_ldisc() sees buffer data.
+ */
+ smp_store_release(&b->commit, b->used);
/* paired w/ acquire in flush_to_ldisc(); ensures the
* latest commit value can be read before the head is
* advanced to the next buffer
{
struct tty_bufhead *buf = &port->buf;
- buf->tail->commit = buf->tail->used;
+ /* paired w/ acquire in flush_to_ldisc(); ensures
+ * flush_to_ldisc() sees buffer data.
+ */
+ smp_store_release(&buf->tail->commit, buf->tail->used);
schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
struct tty_struct *tty;
struct tty_ldisc *disc;
- tty = port->itty;
+ tty = READ_ONCE(port->itty);
if (tty == NULL)
return;
* is advancing to the next buffer
*/
next = smp_load_acquire(&head->next);
- count = head->commit - head->read;
+ /* paired w/ release in __tty_buffer_request_room() or in
+ * tty_buffer_flush(); ensures we see the committed buffer data
+ */
+ count = smp_load_acquire(&head->commit) - head->read;
if (!count) {
if (next == NULL) {
check_other_closed(tty);
if (!noctty &&
current->signal->leader &&
!current->signal->tty &&
- tty->session == NULL)
- __proc_set_tty(tty);
+ tty->session == NULL) {
+ /*
+ * Don't let a process that only has write access to the tty
+ * obtain the privileges associated with having a tty as
+ * controlling terminal (being able to reopen it with full
+ * access through /dev/tty, being able to perform pushback).
+ * Many distributions set the group of all ttys to "tty" and
+ * grant write-only access to all terminals for setgid tty
+ * binaries, which should not imply full privileges on all ttys.
+ *
+ * This could theoretically break old code that performs open()
+ * on a write-only file descriptor. In that case, it might be
+ * necessary to also permit this if
+ * inode_permission(inode, MAY_READ) == 0.
+ */
+ if (filp->f_mode & FMODE_READ)
+ __proc_set_tty(tty);
+ }
spin_unlock_irq(¤t->sighand->siglock);
read_unlock(&tasklist_lock);
tty_unlock(tty);
* Takes ->siglock() when updating signal->tty
*/
-static int tiocsctty(struct tty_struct *tty, int arg)
+static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
{
int ret = 0;
goto unlock;
}
}
+
+ /* See the comment in tty_open(). */
+ if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
proc_set_tty(tty);
unlock:
read_unlock(&tasklist_lock);
no_tty();
return 0;
case TIOCSCTTY:
- return tiocsctty(tty, arg);
+ return tiocsctty(tty, file, arg);
case TIOCGPGRP:
return tiocgpgrp(tty, real_tty, p);
case TIOCSPGRP:
static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
unsigned int index, unsigned int count)
{
+ int err;
+
/* init here, since reused cdevs cause crashes */
driver->cdevs[index] = cdev_alloc();
if (!driver->cdevs[index])
return -ENOMEM;
- cdev_init(driver->cdevs[index], &tty_fops);
+ driver->cdevs[index]->ops = &tty_fops;
driver->cdevs[index]->owner = driver->owner;
- return cdev_add(driver->cdevs[index], dev, count);
+ err = cdev_add(driver->cdevs[index], dev, count);
+ if (err)
+ kobject_put(&driver->cdevs[index]->kobj);
+ return err;
}
/**
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool in_lpm;
+ /* SoC before i.mx6 (except imx23/imx28) needs three clks */
+ bool need_three_clks;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
+ /* --------------------------------- */
};
/* Common functions shared by usbmisc drivers */
}
/* End of common functions shared by usbmisc drivers*/
+static int imx_get_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->clk_ipg = devm_clk_get(dev, "ipg");
+ if (IS_ERR(data->clk_ipg)) {
+ /* If the platform only needs one clocks */
+ data->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ dev_err(dev,
+ "Failed to get clks, err=%ld,%ld\n",
+ PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
+ return ret;
+ }
+ return ret;
+ }
+
+ data->clk_ahb = devm_clk_get(dev, "ahb");
+ if (IS_ERR(data->clk_ahb)) {
+ ret = PTR_ERR(data->clk_ahb);
+ dev_err(dev,
+ "Failed to get ahb clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->clk_per = devm_clk_get(dev, "per");
+ if (IS_ERR(data->clk_per)) {
+ ret = PTR_ERR(data->clk_per);
+ dev_err(dev,
+ "Failed to get per clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->need_three_clks = true;
+ return ret;
+}
+
+static int imx_prepare_enable_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->need_three_clks) {
+ ret = clk_prepare_enable(data->clk_ipg);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ipg clk, err=%d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_ahb);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ahb clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_per);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable per clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+ } else {
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable clk, err=%d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void imx_disable_unprepare_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+ if (data->need_three_clks) {
+ clk_disable_unprepare(data->clk_per);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ } else {
+ clk_disable_unprepare(data->clk);
+ }
+}
static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
if (!data)
return -ENOMEM;
+ platform_set_drvdata(pdev, data);
data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
if (IS_ERR(data->usbmisc_data))
return PTR_ERR(data->usbmisc_data);
- data->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev,
- "Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
- return PTR_ERR(data->clk);
- }
+ ret = imx_get_clks(&pdev->dev);
+ if (ret)
+ return ret;
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to prepare or enable clock, err=%d\n", ret);
+ ret = imx_prepare_enable_clks(&pdev->dev);
+ if (ret)
return ret;
- }
data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
goto disable_device;
}
- platform_set_drvdata(pdev, data);
-
if (data->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return ret;
}
pm_runtime_put_noidle(&pdev->dev);
}
ci_hdrc_remove_device(data->ci_pdev);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return 0;
}
dev_dbg(dev, "at %s\n", __func__);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
data->in_lpm = true;
return 0;
return 0;
}
- ret = clk_prepare_enable(data->clk);
+ ret = imx_prepare_enable_clks(dev);
if (ret)
return ret;
return 0;
clk_disable:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
return ret;
}
return -EINVAL;
pm_runtime_get_sync(ci->dev);
+ disable_irq(ci->irq);
ci_role_stop(ci);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);
pm_runtime_put_sync(ci->dev);
return ret ? ret : count;
return retval;
}
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+ if (!ci_otg_is_fsm_mode(ci))
+ return;
+
+ mutex_lock(&ci->fsm.lock);
+ if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+ ci->fsm.a_bidl_adis_tmout = 1;
+ ci_hdrc_otg_fsm_start(ci);
+ } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+ ci->fsm.protocol = PROTO_UNDEF;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+ }
+ mutex_unlock(&ci->fsm.lock);
+}
+
/**
* ci_udc_stop: unregister a gadget driver
*/
ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
+ ci_udc_stop_for_otg_fsm(ci);
return 0;
}
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Logitech ConferenceCam CC3000e */
+ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+ { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+ /* Logitech PTZ Pro Camera */
+ { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Plantronic Audio 655 DSP */
+ { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Plantronic Audio 648 USB */
+ { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Artisman Watchdog Dongle */
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
bd_table->start_bd = dma_pool_alloc(bdc->bd_table_pool,
GFP_ATOMIC,
&dma);
- if (!bd_table->start_bd)
+ if (!bd_table->start_bd) {
+ kfree(bd_table);
goto fail;
+ }
bd_table->dma = dma;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+ xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
}
/* Fast path - was this the last TRB in the TD for this URB? */
} else if (event_trb == td->last_trb) {
+ if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX)
+ return finish_td(xhci, td, event_trb, event, ep,
+ status, false);
+
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+ if (trb_comp_code == COMP_SHORT_TX) {
+ xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n");
+ td->urb_length_set = true;
+ return 0;
+ }
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
u32 trb_comp_code;
int ret = 0;
int td_num = 0;
+ bool handling_skipped_tds = false;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep->skip = true;
xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
goto cleanup;
+ case COMP_PING_ERR:
+ ep->skip = true;
+ xhci_dbg(xhci, "No Ping response error, Skip one Isoc TD\n");
+ goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
ep, &status);
cleanup:
+
+
+ handling_skipped_tds = ep->skip &&
+ trb_comp_code != COMP_MISSED_INT &&
+ trb_comp_code != COMP_PING_ERR;
+
/*
- * Do not update event ring dequeue pointer if ep->skip is set.
- * Will roll back to continue process missed tds.
+ * Do not update event ring dequeue pointer if we're in a loop
+ * processing missed tds.
*/
- if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+ if (!handling_skipped_tds)
inc_deq(xhci, xhci->event_ring);
- }
if (ret) {
urb = td->urb;
* Process them as short transfer until reach the td pointed by
* the event.
*/
- } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+ } while (handling_skipped_tds);
return 0;
}
if (this_time > max)
this_time = max;
- memcpy(data, dev->buf, this_time);
+ memcpy(data, dev->buf + dev->used, this_time);
dev->used += this_time;
}
musb->isr = omap2430_musb_interrupt;
+ /*
+ * Enable runtime PM for musb parent (this driver). We can't
+ * do it earlier as struct musb is not yet allocated and we
+ * need to touch the musb registers for runtime PM.
+ */
+ pm_runtime_enable(glue->dev);
+ status = pm_runtime_get_sync(glue->dev);
+ if (status < 0)
+ goto err1;
+
status = pm_runtime_get_sync(dev);
if (status < 0) {
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
+ pm_runtime_put_sync(glue->dev);
goto err1;
}
phy_power_on(musb->phy);
pm_runtime_put_noidle(musb->controller);
+ pm_runtime_put_noidle(glue->dev);
return 0;
err1:
goto err2;
}
- pm_runtime_enable(&pdev->dev);
+ /*
+ * Note that we cannot enable PM runtime yet for this
+ * driver as we need struct musb initialized first.
+ * See omap2430_musb_init above.
+ */
ret = platform_device_add(musb);
if (ret) {
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- if (musb) {
- omap2430_low_level_init(musb);
- musb_writel(musb->mregs, OTG_INTERFSEL,
- musb->context.otg_interfsel);
- }
+ if (!musb)
+ return -EPROBE_DEFER;
+
+ omap2430_low_level_init(musb);
+ musb_writel(musb->mregs, OTG_INTERFSEL,
+ musb->context.otg_interfsel);
return 0;
}
.compatible = "renesas,usbhs-r8a7794",
.data = (void *)USBHS_TYPE_RCAR_GEN2,
},
+ {
+ /* Gen3 is compatible with Gen2 */
+ .compatible = "renesas,usbhs-r8a7795",
+ .data = (void *)USBHS_TYPE_RCAR_GEN2,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);
return NULL;
dparam = &info->driver_param;
- dparam->type = of_id ? (u32)of_id->data : 0;
+ dparam->type = of_id ? (uintptr_t)of_id->data : 0;
if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
dparam->buswait_bwait = tmp;
gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
return vq->acked_features & (1ULL << bit);
}
+#ifdef CONFIG_VHOST_CROSS_ENDIAN_LEGACY
static inline bool vhost_is_little_endian(struct vhost_virtqueue *vq)
{
return vq->is_le;
}
+#else
+static inline bool vhost_is_little_endian(struct vhost_virtqueue *vq)
+{
+ return virtio_legacy_is_little_endian() || vq->is_le;
+}
+#endif
/* Memory accessors */
static inline u16 vhost16_to_cpu(struct vhost_virtqueue *vq, __virtio16 val)
con_copy_unimap(vc, svc);
ops = info->fbcon_par;
+ ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
p->con_rotate = initial_rotation;
set_blitting_type(vc, info);
#include <linux/watchdog.h>
#include <linux/suspend.h>
#include <asm/ebcdic.h>
+#include <asm/diag.h>
#include <linux/io.h>
#include <linux/uaccess.h>
static int __diag288_vm(unsigned int func, unsigned int timeout,
char *cmd, size_t len)
{
+ diag_stat_inc(DIAG_STAT_X288);
return __diag288(func, timeout, virt_to_phys(cmd), len);
}
static int __diag288_lpar(unsigned int func, unsigned int timeout,
unsigned long action)
{
+ diag_stat_inc(DIAG_STAT_X288);
return __diag288(func, timeout, action, 0);
}
{
int ret;
+ diag_stat_inc(DIAG_STAT_X288);
ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0);
return ret;
}
# Do not add any filesystems before this line
obj-$(CONFIG_FSCACHE) += fscache/
obj-$(CONFIG_REISERFS_FS) += reiserfs/
-obj-$(CONFIG_EXT2_FS) += ext2/
-# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
-# unless explicitly requested by rootfstype
obj-$(CONFIG_EXT4_FS) += ext4/
+# We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
+# ext2 driver, which doesn't know about journalling! Explicitly request ext2
+# by giving the rootfstype= parameter.
+obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
PAGE_ALIGN(current->mm->start_brk);
#else
- /* create a stack and brk area big enough for everyone
- * - the brk heap starts at the bottom and works up
- * - the stack starts at the top and works down
- */
+ /* create a stack area and zero-size brk area */
stack_size = (stack_size + PAGE_SIZE - 1) & PAGE_MASK;
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
- current->mm->context.end_brk +=
- (stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
current->mm->start_stack = current->mm->start_brk + stack_size;
#endif
int found = 0;
struct extent_buffer *eb;
struct btrfs_inode_extref *extref;
- struct extent_buffer *leaf;
u32 item_size;
u32 cur_offset;
unsigned long ptr;
btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
btrfs_release_path(path);
- leaf = path->nodes[0];
- item_size = btrfs_item_size_nr(leaf, slot);
- ptr = btrfs_item_ptr_offset(leaf, slot);
+ item_size = btrfs_item_size_nr(eb, slot);
+ ptr = btrfs_item_ptr_offset(eb, slot);
cur_offset = 0;
while (cur_offset < item_size) {
if (ret)
break;
- cur_offset += btrfs_inode_extref_name_len(leaf, extref);
+ cur_offset += btrfs_inode_extref_name_len(eb, extref);
cur_offset += sizeof(*extref);
}
btrfs_tree_read_unlock_blocking(eb);
!extent_buffer_uptodate(chunk_root->node)) {
printk(KERN_ERR "BTRFS: failed to read chunk root on %s\n",
sb->s_id);
+ if (!IS_ERR(chunk_root->node))
+ free_extent_buffer(chunk_root->node);
chunk_root->node = NULL;
goto fail_tree_roots;
}
!extent_buffer_uptodate(tree_root->node)) {
printk(KERN_WARNING "BTRFS: failed to read tree root on %s\n",
sb->s_id);
+ if (!IS_ERR(tree_root->node))
+ free_extent_buffer(tree_root->node);
tree_root->node = NULL;
goto recovery_tree_root;
}
u32 generation;
if (fh_type == FILEID_BTRFS_WITH_PARENT) {
- if (fh_len != BTRFS_FID_SIZE_CONNECTABLE)
+ if (fh_len < BTRFS_FID_SIZE_CONNECTABLE)
return NULL;
root_objectid = fid->root_objectid;
} else if (fh_type == FILEID_BTRFS_WITH_PARENT_ROOT) {
- if (fh_len != BTRFS_FID_SIZE_CONNECTABLE_ROOT)
+ if (fh_len < BTRFS_FID_SIZE_CONNECTABLE_ROOT)
return NULL;
root_objectid = fid->parent_root_objectid;
} else
u32 generation;
if ((fh_type != FILEID_BTRFS_WITH_PARENT ||
- fh_len != BTRFS_FID_SIZE_CONNECTABLE) &&
+ fh_len < BTRFS_FID_SIZE_CONNECTABLE) &&
(fh_type != FILEID_BTRFS_WITH_PARENT_ROOT ||
- fh_len != BTRFS_FID_SIZE_CONNECTABLE_ROOT) &&
+ fh_len < BTRFS_FID_SIZE_CONNECTABLE_ROOT) &&
(fh_type != FILEID_BTRFS_WITHOUT_PARENT ||
- fh_len != BTRFS_FID_SIZE_NON_CONNECTABLE))
+ fh_len < BTRFS_FID_SIZE_NON_CONNECTABLE))
return NULL;
objectid = fid->objectid;
struct btrfs_delayed_ref_head *head;
int ret;
int run_all = count == (unsigned long)-1;
+ bool can_flush_pending_bgs = trans->can_flush_pending_bgs;
/* We'll clean this up in btrfs_cleanup_transaction */
if (trans->aborted)
#ifdef SCRAMBLE_DELAYED_REFS
delayed_refs->run_delayed_start = find_middle(&delayed_refs->root);
#endif
+ trans->can_flush_pending_bgs = false;
ret = __btrfs_run_delayed_refs(trans, root, count);
if (ret < 0) {
btrfs_abort_transaction(trans, root, ret);
}
out:
assert_qgroups_uptodate(trans);
+ trans->can_flush_pending_bgs = can_flush_pending_bgs;
return 0;
}
* the block groups that were made dirty during the lifetime of the
* transaction.
*/
- if (trans->chunk_bytes_reserved >= (2 * 1024 * 1024ull)) {
+ if (trans->can_flush_pending_bgs &&
+ trans->chunk_bytes_reserved >= (2 * 1024 * 1024ull)) {
btrfs_create_pending_block_groups(trans, trans->root);
btrfs_trans_release_chunk_metadata(trans);
}
struct btrfs_block_group_item item;
struct btrfs_key key;
int ret = 0;
+ bool can_flush_pending_bgs = trans->can_flush_pending_bgs;
+ trans->can_flush_pending_bgs = false;
list_for_each_entry_safe(block_group, tmp, &trans->new_bgs, bg_list) {
if (ret)
goto next;
next:
list_del_init(&block_group->bg_list);
}
+ trans->can_flush_pending_bgs = can_flush_pending_bgs;
}
int btrfs_make_block_group(struct btrfs_trans_handle *trans,
get_extent_t *get_extent,
struct extent_map **em_cached,
struct bio **bio, int mirror_num,
- unsigned long *bio_flags, int rw)
+ unsigned long *bio_flags, int rw,
+ u64 *prev_em_start)
{
struct inode *inode;
struct btrfs_ordered_extent *ordered;
int index;
- u64 prev_em_start = (u64)-1;
inode = pages[0]->mapping->host;
while (1) {
for (index = 0; index < nr_pages; index++) {
__do_readpage(tree, pages[index], get_extent, em_cached, bio,
- mirror_num, bio_flags, rw, &prev_em_start);
+ mirror_num, bio_flags, rw, prev_em_start);
page_cache_release(pages[index]);
}
}
int nr_pages, get_extent_t *get_extent,
struct extent_map **em_cached,
struct bio **bio, int mirror_num,
- unsigned long *bio_flags, int rw)
+ unsigned long *bio_flags, int rw,
+ u64 *prev_em_start)
{
u64 start = 0;
u64 end = 0;
index - first_index, start,
end, get_extent, em_cached,
bio, mirror_num, bio_flags,
- rw);
+ rw, prev_em_start);
start = page_start;
end = start + PAGE_CACHE_SIZE - 1;
first_index = index;
__do_contiguous_readpages(tree, &pages[first_index],
index - first_index, start,
end, get_extent, em_cached, bio,
- mirror_num, bio_flags, rw);
+ mirror_num, bio_flags, rw,
+ prev_em_start);
}
static int __extent_read_full_page(struct extent_io_tree *tree,
struct page *page;
struct extent_map *em_cached = NULL;
int nr = 0;
+ u64 prev_em_start = (u64)-1;
for (page_idx = 0; page_idx < nr_pages; page_idx++) {
page = list_entry(pages->prev, struct page, lru);
if (nr < ARRAY_SIZE(pagepool))
continue;
__extent_readpages(tree, pagepool, nr, get_extent, &em_cached,
- &bio, 0, &bio_flags, READ);
+ &bio, 0, &bio_flags, READ, &prev_em_start);
nr = 0;
}
if (nr)
__extent_readpages(tree, pagepool, nr, get_extent, &em_cached,
- &bio, 0, &bio_flags, READ);
+ &bio, 0, &bio_flags, READ, &prev_em_start);
if (em_cached)
free_extent_map(em_cached);
alloc_start);
if (ret)
goto out;
- } else {
+ } else if (offset + len > inode->i_size) {
/*
* If we are fallocating from the end of the file onward we
* need to zero out the end of the page if i_size lands in the
bctl->flags |= BTRFS_BALANCE_TYPE_MASK;
}
+ if (bctl->flags & ~(BTRFS_BALANCE_ARGS_MASK | BTRFS_BALANCE_TYPE_MASK)) {
+ ret = -EINVAL;
+ goto out_bctl;
+ }
+
do_balance:
/*
* Ownership of bctl and mutually_exclusive_operation_running
need_unlock = false;
ret = btrfs_balance(bctl, bargs);
+ bctl = NULL;
if (arg) {
if (copy_to_user(arg, bargs, sizeof(*bargs)))
ret = -EFAULT;
}
+out_bctl:
+ kfree(bctl);
out_bargs:
kfree(bargs);
out_unlock:
/*
* We know that it is or will be overwritten. Check this now.
* The current inode being processed might have been the one that caused
- * inode 'ino' to be orphanized, therefore ow_inode can actually be the
- * same as sctx->send_progress.
+ * inode 'ino' to be orphanized, therefore check if ow_inode matches
+ * the current inode being processed.
*/
- if (ow_inode <= sctx->send_progress)
+ if ((ow_inode < sctx->send_progress) ||
+ (ino != sctx->cur_ino && ow_inode == sctx->cur_ino &&
+ gen == sctx->cur_inode_gen))
ret = 1;
else
ret = 0;
h->delayed_ref_elem.seq = 0;
h->type = type;
h->allocating_chunk = false;
+ h->can_flush_pending_bgs = true;
h->reloc_reserved = false;
h->sync = false;
INIT_LIST_HEAD(&h->qgroup_ref_list);
short aborted;
short adding_csums;
bool allocating_chunk;
+ bool can_flush_pending_bgs;
bool reloc_reserved;
bool sync;
unsigned int type;
#define BTRFS_BALANCE_ARGS_VRANGE (1ULL << 4)
#define BTRFS_BALANCE_ARGS_LIMIT (1ULL << 5)
+#define BTRFS_BALANCE_ARGS_MASK \
+ (BTRFS_BALANCE_ARGS_PROFILES | \
+ BTRFS_BALANCE_ARGS_USAGE | \
+ BTRFS_BALANCE_ARGS_DEVID | \
+ BTRFS_BALANCE_ARGS_DRANGE | \
+ BTRFS_BALANCE_ARGS_VRANGE | \
+ BTRFS_BALANCE_ARGS_LIMIT)
+
/*
* Profile changing flags. When SOFT is set we won't relocate chunk if
* it already has the target profile (even though it may be
seq_puts(s, ",nocase");
if (tcon->retry)
seq_puts(s, ",hard");
+ if (tcon->use_persistent)
+ seq_puts(s, ",persistenthandles");
+ else if (tcon->use_resilient)
+ seq_puts(s, ",resilienthandles");
if (tcon->unix_ext)
seq_puts(s, ",unix");
else
void (*print_stats)(struct seq_file *m, struct cifs_tcon *);
void (*dump_share_caps)(struct seq_file *, struct cifs_tcon *);
/* verify the message */
- int (*check_message)(char *, unsigned int);
+ int (*check_message)(char *, unsigned int, struct TCP_Server_Info *);
bool (*is_oplock_break)(char *, struct TCP_Server_Info *);
void (*downgrade_oplock)(struct TCP_Server_Info *,
struct cifsInodeInfo *, bool);
bool mfsymlinks:1; /* use Minshall+French Symlinks */
bool multiuser:1;
bool rwpidforward:1; /* pid forward for read/write operations */
- bool nosharesock;
+ bool nosharesock:1;
+ bool persistent:1;
+ bool nopersistent:1;
+ bool resilient:1; /* noresilient not required since not fored for CA */
unsigned int rsize;
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
#ifdef CONFIG_CIFS_SMB2
unsigned int max_read;
unsigned int max_write;
+ __u8 preauth_hash[512];
#endif /* CONFIG_CIFS_SMB2 */
};
bool need_reconnect:1; /* connection reset, uid now invalid */
#ifdef CONFIG_CIFS_SMB2
__u16 session_flags;
- char smb3signingkey[SMB3_SIGN_KEY_SIZE]; /* for signing smb3 packets */
+ __u8 smb3signingkey[SMB3_SIGN_KEY_SIZE];
+ __u8 smb3encryptionkey[SMB3_SIGN_KEY_SIZE];
+ __u8 smb3decryptionkey[SMB3_SIGN_KEY_SIZE];
+ __u8 preauth_hash[512];
#endif /* CONFIG_CIFS_SMB2 */
};
bool broken_posix_open; /* e.g. Samba server versions < 3.3.2, 3.2.9 */
bool broken_sparse_sup; /* if server or share does not support sparse */
bool need_reconnect:1; /* connection reset, tid now invalid */
+ bool use_resilient:1; /* use resilient instead of durable handles */
+ bool use_persistent:1; /* use persistent instead of durable handles */
#ifdef CONFIG_CIFS_SMB2
bool print:1; /* set if connection to printer share */
bool bad_network_name:1; /* set if ret status STATUS_BAD_NETWORK_NAME */
__u64 persistent_fid; /* persist file id for smb2 */
__u64 volatile_fid; /* volatile file id for smb2 */
__u8 lease_key[SMB2_LEASE_KEY_SIZE]; /* lease key for smb2 */
+ __u8 create_guid[16];
#endif
struct cifs_pending_open *pending_open;
unsigned int epoch;
struct smb_hdr *out_buf,
int *bytes_returned);
extern int cifs_reconnect(struct TCP_Server_Info *server);
-extern int checkSMB(char *buf, unsigned int length);
+extern int checkSMB(char *buf, unsigned int len, struct TCP_Server_Info *srvr);
extern bool is_valid_oplock_break(char *, struct TCP_Server_Info *);
extern bool backup_cred(struct cifs_sb_info *);
extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern int setup_ntlmv2_rsp(struct cifs_ses *, const struct nls_table *);
extern void cifs_crypto_shash_release(struct TCP_Server_Info *);
extern int calc_seckey(struct cifs_ses *);
-extern int generate_smb3signingkey(struct cifs_ses *);
+extern int generate_smb30signingkey(struct cifs_ses *);
+extern int generate_smb311signingkey(struct cifs_ses *);
#ifdef CONFIG_CIFS_WEAK_PW_HASH
extern int calc_lanman_hash(const char *password, const char *cryptkey,
Opt_sign, Opt_seal, Opt_noac,
Opt_fsc, Opt_mfsymlinks,
Opt_multiuser, Opt_sloppy, Opt_nosharesock,
+ Opt_persistent, Opt_nopersistent,
+ Opt_resilient, Opt_noresilient,
/* Mount options which take numeric value */
Opt_backupuid, Opt_backupgid, Opt_uid,
{ Opt_multiuser, "multiuser" },
{ Opt_sloppy, "sloppy" },
{ Opt_nosharesock, "nosharesock" },
+ { Opt_persistent, "persistenthandles"},
+ { Opt_nopersistent, "nopersistenthandles"},
+ { Opt_resilient, "resilienthandles"},
+ { Opt_noresilient, "noresilienthandles"},
{ Opt_backupuid, "backupuid=%s" },
{ Opt_backupgid, "backupgid=%s" },
* 48 bytes is enough to display the header and a little bit
* into the payload for debugging purposes.
*/
- length = server->ops->check_message(buf, server->total_read);
+ length = server->ops->check_message(buf, server->total_read, server);
if (length != 0)
cifs_dump_mem("Bad SMB: ", buf,
min_t(unsigned int, server->total_read, 48));
case Opt_nosharesock:
vol->nosharesock = true;
break;
+ case Opt_nopersistent:
+ vol->nopersistent = true;
+ if (vol->persistent) {
+ cifs_dbg(VFS,
+ "persistenthandles mount options conflict\n");
+ goto cifs_parse_mount_err;
+ }
+ break;
+ case Opt_persistent:
+ vol->persistent = true;
+ if ((vol->nopersistent) || (vol->resilient)) {
+ cifs_dbg(VFS,
+ "persistenthandles mount options conflict\n");
+ goto cifs_parse_mount_err;
+ }
+ break;
+ case Opt_resilient:
+ vol->resilient = true;
+ if (vol->persistent) {
+ cifs_dbg(VFS,
+ "persistenthandles mount options conflict\n");
+ goto cifs_parse_mount_err;
+ }
+ break;
+ case Opt_noresilient:
+ vol->resilient = false; /* this is already the default */
+ break;
/* Numeric Values */
case Opt_backupuid:
cifs_dbg(FYI, "DFS disabled (%d)\n", tcon->Flags);
}
tcon->seal = volume_info->seal;
+ tcon->use_persistent = false;
+ /* check if SMB2 or later, CIFS does not support persistent handles */
+ if (volume_info->persistent) {
+ if (ses->server->vals->protocol_id == 0) {
+ cifs_dbg(VFS,
+ "SMB3 or later required for persistent handles\n");
+ rc = -EOPNOTSUPP;
+ goto out_fail;
+#ifdef CONFIG_CIFS_SMB2
+ } else if (ses->server->capabilities &
+ SMB2_GLOBAL_CAP_PERSISTENT_HANDLES)
+ tcon->use_persistent = true;
+ else /* persistent handles requested but not supported */ {
+ cifs_dbg(VFS,
+ "Persistent handles not supported on share\n");
+ rc = -EOPNOTSUPP;
+ goto out_fail;
+#endif /* CONFIG_CIFS_SMB2 */
+ }
+#ifdef CONFIG_CIFS_SMB2
+ } else if ((tcon->capabilities & SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY)
+ && (ses->server->capabilities & SMB2_GLOBAL_CAP_PERSISTENT_HANDLES)
+ && (volume_info->nopersistent == false)) {
+ cifs_dbg(FYI, "enabling persistent handles\n");
+ tcon->use_persistent = true;
+#endif /* CONFIG_CIFS_SMB2 */
+ } else if (volume_info->resilient) {
+ if (ses->server->vals->protocol_id == 0) {
+ cifs_dbg(VFS,
+ "SMB2.1 or later required for resilient handles\n");
+ rc = -EOPNOTSUPP;
+ goto out_fail;
+ }
+ tcon->use_resilient = true;
+ }
+
/*
* We can have only one retry value for a connection to a share so for
* resources mounted more than once to the same server share the last
goto mount_fail_check;
}
+#ifdef CONFIG_CIFS_SMB2
+ if ((volume_info->persistent == true) && ((ses->server->capabilities &
+ SMB2_GLOBAL_CAP_PERSISTENT_HANDLES) == 0)) {
+ cifs_dbg(VFS, "persistent handles not supported by server\n");
+ rc = -EOPNOTSUPP;
+ goto mount_fail_check;
+ }
+#endif /* CONFIG_CIFS_SMB2 */
+
/* search for existing tcon to this server share */
tcon = cifs_get_tcon(ses, volume_info);
if (IS_ERR(tcon)) {
struct page *page, *tpage;
unsigned int expected_index;
int rc;
+ gfp_t gfp = GFP_KERNEL & mapping_gfp_mask(mapping);
INIT_LIST_HEAD(tmplist);
*/
__set_page_locked(page);
rc = add_to_page_cache_locked(page, mapping,
- page->index, GFP_KERNEL);
+ page->index, gfp);
/* give up if we can't stick it in the cache */
if (rc) {
break;
__set_page_locked(page);
- if (add_to_page_cache_locked(page, mapping, page->index,
- GFP_KERNEL)) {
+ if (add_to_page_cache_locked(page, mapping, page->index, gfp)) {
__clear_page_locked(page);
break;
}
}
int
-checkSMB(char *buf, unsigned int total_read)
+checkSMB(char *buf, unsigned int total_read, struct TCP_Server_Info *server)
{
struct smb_hdr *smb = (struct smb_hdr *)buf;
__u32 rfclen = be32_to_cpu(smb->smb_buf_length);
struct smb2_file_all_info *smb2_data = NULL;
__u8 smb2_oplock[17];
struct cifs_fid *fid = oparms->fid;
+ struct network_resiliency_req nr_ioctl_req;
smb2_path = cifs_convert_path_to_utf16(oparms->path, oparms->cifs_sb);
if (smb2_path == NULL) {
if (rc)
goto out;
+
+ if (oparms->tcon->use_resilient) {
+ nr_ioctl_req.Timeout = 0; /* use server default (120 seconds) */
+ nr_ioctl_req.Reserved = 0;
+ rc = SMB2_ioctl(xid, oparms->tcon, fid->persistent_fid,
+ fid->volatile_fid, FSCTL_LMR_REQUEST_RESILIENCY, true,
+ (char *)&nr_ioctl_req, sizeof(nr_ioctl_req),
+ NULL, NULL /* no return info */);
+ if (rc == -EOPNOTSUPP) {
+ cifs_dbg(VFS,
+ "resiliency not supported by server, disabling\n");
+ oparms->tcon->use_resilient = false;
+ } else if (rc)
+ cifs_dbg(FYI, "error %d setting resiliency\n", rc);
+
+ rc = 0;
+ }
+
if (buf) {
/* open response does not have IndexNumber field - get it */
rc = SMB2_get_srv_num(xid, oparms->tcon, fid->persistent_fid,
* Make sure that this really is an SMB, that it is a response,
* and that the message ids match.
*/
- if ((*(__le32 *)hdr->ProtocolId == SMB2_PROTO_NUMBER) &&
+ if ((hdr->ProtocolId == SMB2_PROTO_NUMBER) &&
(mid == wire_mid)) {
if (hdr->Flags & SMB2_FLAGS_SERVER_TO_REDIR)
return 0;
cifs_dbg(VFS, "Received Request not response\n");
}
} else { /* bad signature or mid */
- if (*(__le32 *)hdr->ProtocolId != SMB2_PROTO_NUMBER)
+ if (hdr->ProtocolId != SMB2_PROTO_NUMBER)
cifs_dbg(VFS, "Bad protocol string signature header %x\n",
- *(unsigned int *) hdr->ProtocolId);
+ le32_to_cpu(hdr->ProtocolId));
if (mid != wire_mid)
cifs_dbg(VFS, "Mids do not match: %llu and %llu\n",
mid, wire_mid);
};
int
-smb2_check_message(char *buf, unsigned int length)
+smb2_check_message(char *buf, unsigned int length, struct TCP_Server_Info *srvr)
{
struct smb2_hdr *hdr = (struct smb2_hdr *)buf;
struct smb2_pdu *pdu = (struct smb2_pdu *)hdr;
- __u64 mid = le64_to_cpu(hdr->MessageId);
+ __u64 mid;
__u32 len = get_rfc1002_length(buf);
__u32 clc_len; /* calculated length */
int command;
* ie Validate the wct via smb2_struct_sizes table above
*/
+ if (hdr->ProtocolId == SMB2_TRANSFORM_PROTO_NUM) {
+ struct smb2_transform_hdr *thdr =
+ (struct smb2_transform_hdr *)buf;
+ struct cifs_ses *ses = NULL;
+ struct list_head *tmp;
+
+/* cifs_dbg(VFS, "Flags 0x%x Session Id %lld\n",
+ thdr->Flags, thdr->SessionId); */
+
+ /* decrypt frame now that it is completely read in */
+ spin_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &srvr->smb_ses_list) {
+ ses = list_entry(tmp, struct cifs_ses, smb_ses_list);
+ if (ses->Suid == thdr->SessionId)
+ break;
+
+ ses = NULL;
+ }
+ spin_unlock(&cifs_tcp_ses_lock);
+ if (ses == NULL) {
+ cifs_dbg(VFS, "no decryption - session id not found\n");
+ return 1;
+ }
+ }
+
+
+ mid = le64_to_cpu(hdr->MessageId);
if (length < sizeof(struct smb2_pdu)) {
if ((length >= sizeof(struct smb2_hdr)) && (hdr->Status != 0)) {
pdu->StructureSize2 = 0;
/* return pointer to beginning of data area, ie offset from SMB start */
if ((*off != 0) && (*len != 0))
- return (char *)(&hdr->ProtocolId[0]) + *off;
+ return (char *)(&hdr->ProtocolId) + *off;
else
return NULL;
}
struct smb2_hdr *hdr = (struct smb2_hdr *)buf;
__u64 wire_mid = le64_to_cpu(hdr->MessageId);
+ if (hdr->ProtocolId == SMB2_TRANSFORM_PROTO_NUM) {
+ cifs_dbg(VFS, "encrypted frame parsing not supported yet");
+ return NULL;
+ }
+
spin_lock(&GlobalMid_Lock);
list_for_each_entry(mid, &server->pending_mid_q, qhead) {
if ((mid->mid == wire_mid) &&
cfile->fid.volatile_fid, cfile->pid, &eof, false);
}
-#ifdef CONFIG_CIFS_SMB311
static int
smb2_duplicate_extents(const unsigned int xid,
struct cifsFileInfo *srcfile,
duplicate_extents_out:
return rc;
}
-#endif /* CONFIG_CIFS_SMB311 */
-
static int
smb2_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
.get_lease_key = smb2_get_lease_key,
.set_lease_key = smb2_set_lease_key,
.new_lease_key = smb2_new_lease_key,
- .generate_signingkey = generate_smb3signingkey,
+ .generate_signingkey = generate_smb30signingkey,
.calc_signature = smb3_calc_signature,
.set_integrity = smb3_set_integrity,
.is_read_op = smb21_is_read_op,
.create_lease_buf = smb3_create_lease_buf,
.parse_lease_buf = smb3_parse_lease_buf,
.clone_range = smb2_clone_range,
+ .duplicate_extents = smb2_duplicate_extents,
.validate_negotiate = smb3_validate_negotiate,
.wp_retry_size = smb2_wp_retry_size,
.dir_needs_close = smb2_dir_needs_close,
.get_lease_key = smb2_get_lease_key,
.set_lease_key = smb2_set_lease_key,
.new_lease_key = smb2_new_lease_key,
- .generate_signingkey = generate_smb3signingkey,
+ .generate_signingkey = generate_smb311signingkey,
.calc_signature = smb3_calc_signature,
.set_integrity = smb3_set_integrity,
.is_read_op = smb21_is_read_op,
struct smb_version_values smb30_values = {
.version_string = SMB30_VERSION_STRING,
.protocol_id = SMB30_PROT_ID,
- .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU,
+ .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU | SMB2_GLOBAL_CAP_ENCRYPTION | SMB2_GLOBAL_CAP_PERSISTENT_HANDLES,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE_LOCK,
.shared_lock_type = SMB2_LOCKFLAG_SHARED_LOCK,
struct smb_version_values smb302_values = {
.version_string = SMB302_VERSION_STRING,
.protocol_id = SMB302_PROT_ID,
- .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU,
+ .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU | SMB2_GLOBAL_CAP_PERSISTENT_HANDLES,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE_LOCK,
.shared_lock_type = SMB2_LOCKFLAG_SHARED_LOCK,
struct smb_version_values smb311_values = {
.version_string = SMB311_VERSION_STRING,
.protocol_id = SMB311_PROT_ID,
- .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU,
+ .req_capabilities = SMB2_GLOBAL_CAP_DFS | SMB2_GLOBAL_CAP_LEASING | SMB2_GLOBAL_CAP_LARGE_MTU | SMB2_GLOBAL_CAP_PERSISTENT_HANDLES,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE_LOCK,
.shared_lock_type = SMB2_LOCKFLAG_SHARED_LOCK,
hdr->smb2_buf_length = cpu_to_be32(parmsize + sizeof(struct smb2_hdr)
- 4 /* RFC 1001 length field itself not counted */);
- hdr->ProtocolId[0] = 0xFE;
- hdr->ProtocolId[1] = 'S';
- hdr->ProtocolId[2] = 'M';
- hdr->ProtocolId[3] = 'B';
+ hdr->ProtocolId = SMB2_PROTO_NUMBER;
hdr->StructureSize = cpu_to_le16(64);
hdr->Command = smb2_cmd;
hdr->CreditRequest = cpu_to_le16(2); /* BB make this dynamic */
return 0;
}
+static struct create_durable_v2 *
+create_durable_v2_buf(struct cifs_fid *pfid)
+{
+ struct create_durable_v2 *buf;
+
+ buf = kzalloc(sizeof(struct create_durable), GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ buf->ccontext.DataOffset = cpu_to_le16(offsetof
+ (struct create_durable_v2, dcontext));
+ buf->ccontext.DataLength = cpu_to_le32(sizeof(struct durable_context_v2));
+ buf->ccontext.NameOffset = cpu_to_le16(offsetof
+ (struct create_durable_v2, Name));
+ buf->ccontext.NameLength = cpu_to_le16(4);
+
+ buf->dcontext.Timeout = 0; /* Should this be configurable by workload */
+ buf->dcontext.Flags = cpu_to_le32(SMB2_DHANDLE_FLAG_PERSISTENT);
+ get_random_bytes(buf->dcontext.CreateGuid, 16);
+ memcpy(pfid->create_guid, buf->dcontext.CreateGuid, 16);
+
+ /* SMB2_CREATE_DURABLE_HANDLE_REQUEST is "DH2Q" */
+ buf->Name[0] = 'D';
+ buf->Name[1] = 'H';
+ buf->Name[2] = '2';
+ buf->Name[3] = 'Q';
+ return buf;
+}
+
+static struct create_durable_handle_reconnect_v2 *
+create_reconnect_durable_v2_buf(struct cifs_fid *fid)
+{
+ struct create_durable_handle_reconnect_v2 *buf;
+
+ buf = kzalloc(sizeof(struct create_durable_handle_reconnect_v2),
+ GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ buf->ccontext.DataOffset =
+ cpu_to_le16(offsetof(struct create_durable_handle_reconnect_v2,
+ dcontext));
+ buf->ccontext.DataLength =
+ cpu_to_le32(sizeof(struct durable_reconnect_context_v2));
+ buf->ccontext.NameOffset =
+ cpu_to_le16(offsetof(struct create_durable_handle_reconnect_v2,
+ Name));
+ buf->ccontext.NameLength = cpu_to_le16(4);
+
+ buf->dcontext.Fid.PersistentFileId = fid->persistent_fid;
+ buf->dcontext.Fid.VolatileFileId = fid->volatile_fid;
+ buf->dcontext.Flags = cpu_to_le32(SMB2_DHANDLE_FLAG_PERSISTENT);
+ memcpy(buf->dcontext.CreateGuid, fid->create_guid, 16);
+
+ /* SMB2_CREATE_DURABLE_HANDLE_RECONNECT_V2 is "DH2C" */
+ buf->Name[0] = 'D';
+ buf->Name[1] = 'H';
+ buf->Name[2] = '2';
+ buf->Name[3] = 'C';
+ return buf;
+}
+
static int
-add_durable_context(struct kvec *iov, unsigned int *num_iovec,
+add_durable_v2_context(struct kvec *iov, unsigned int *num_iovec,
+ struct cifs_open_parms *oparms)
+{
+ struct smb2_create_req *req = iov[0].iov_base;
+ unsigned int num = *num_iovec;
+
+ iov[num].iov_base = create_durable_v2_buf(oparms->fid);
+ if (iov[num].iov_base == NULL)
+ return -ENOMEM;
+ iov[num].iov_len = sizeof(struct create_durable_v2);
+ if (!req->CreateContextsOffset)
+ req->CreateContextsOffset =
+ cpu_to_le32(sizeof(struct smb2_create_req) - 4 +
+ iov[1].iov_len);
+ le32_add_cpu(&req->CreateContextsLength, sizeof(struct create_durable_v2));
+ inc_rfc1001_len(&req->hdr, sizeof(struct create_durable_v2));
+ *num_iovec = num + 1;
+ return 0;
+}
+
+static int
+add_durable_reconnect_v2_context(struct kvec *iov, unsigned int *num_iovec,
struct cifs_open_parms *oparms)
{
struct smb2_create_req *req = iov[0].iov_base;
unsigned int num = *num_iovec;
+ /* indicate that we don't need to relock the file */
+ oparms->reconnect = false;
+
+ iov[num].iov_base = create_reconnect_durable_v2_buf(oparms->fid);
+ if (iov[num].iov_base == NULL)
+ return -ENOMEM;
+ iov[num].iov_len = sizeof(struct create_durable_handle_reconnect_v2);
+ if (!req->CreateContextsOffset)
+ req->CreateContextsOffset =
+ cpu_to_le32(sizeof(struct smb2_create_req) - 4 +
+ iov[1].iov_len);
+ le32_add_cpu(&req->CreateContextsLength,
+ sizeof(struct create_durable_handle_reconnect_v2));
+ inc_rfc1001_len(&req->hdr,
+ sizeof(struct create_durable_handle_reconnect_v2));
+ *num_iovec = num + 1;
+ return 0;
+}
+
+static int
+add_durable_context(struct kvec *iov, unsigned int *num_iovec,
+ struct cifs_open_parms *oparms, bool use_persistent)
+{
+ struct smb2_create_req *req = iov[0].iov_base;
+ unsigned int num = *num_iovec;
+
+ if (use_persistent) {
+ if (oparms->reconnect)
+ return add_durable_reconnect_v2_context(iov, num_iovec,
+ oparms);
+ else
+ return add_durable_v2_context(iov, num_iovec, oparms);
+ }
+
if (oparms->reconnect) {
iov[num].iov_base = create_reconnect_durable_buf(oparms->fid);
/* indicate that we don't need to relock the file */
ccontext->Next =
cpu_to_le32(server->vals->create_lease_size);
}
- rc = add_durable_context(iov, &num_iovecs, oparms);
+
+ rc = add_durable_context(iov, &num_iovecs, oparms,
+ tcon->use_persistent);
if (rc) {
cifs_small_buf_release(req);
kfree(copy_path);
goto ioctl_exit;
}
- memcpy(*out_data, rsp->hdr.ProtocolId + le32_to_cpu(rsp->OutputOffset),
+ memcpy(*out_data, (char *)&rsp->hdr.ProtocolId + le32_to_cpu(rsp->OutputOffset),
*plen);
ioctl_exit:
free_rsp_buf(resp_buftype, rsp);
}
if (*buf) {
- memcpy(*buf, (char *)rsp->hdr.ProtocolId + rsp->DataOffset,
+ memcpy(*buf, (char *)&rsp->hdr.ProtocolId + rsp->DataOffset,
*nbytes);
free_rsp_buf(resp_buftype, iov[0].iov_base);
} else if (resp_buftype != CIFS_NO_BUFFER) {
#define MAX_SMB2_HDR_SIZE 0x78 /* 4 len + 64 hdr + (2*24 wct) + 2 bct + 2 pad */
#define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe)
+#define SMB2_TRANSFORM_PROTO_NUM cpu_to_le32(0x424d53fd)
/*
* SMB2 Header Definition
__be32 smb2_buf_length; /* big endian on wire */
/* length is only two or three bytes - with
one or two byte type preceding it that MBZ */
- __u8 ProtocolId[4]; /* 0xFE 'S' 'M' 'B' */
+ __le32 ProtocolId; /* 0xFE 'S' 'M' 'B' */
__le16 StructureSize; /* 64 */
__le16 CreditCharge; /* MBZ */
__le32 Status; /* Error from server */
one or two byte type preceding it that MBZ */
__u8 ProtocolId[4]; /* 0xFD 'S' 'M' 'B' */
__u8 Signature[16];
- __u8 Nonce[11];
- __u8 Reserved[5];
+ __u8 Nonce[16];
__le32 OriginalMessageSize;
__u16 Reserved1;
- __le16 EncryptionAlgorithm;
+ __le16 Flags; /* EncryptionAlgorithm */
__u64 SessionId;
} __packed;
} Data;
} __packed;
+/* See MS-SMB2 2.2.13.2.11 */
+/* Flags */
+#define SMB2_DHANDLE_FLAG_PERSISTENT 0x00000002
+struct durable_context_v2 {
+ __le32 Timeout;
+ __le32 Flags;
+ __u64 Reserved;
+ __u8 CreateGuid[16];
+} __packed;
+
+struct create_durable_v2 {
+ struct create_context ccontext;
+ __u8 Name[8];
+ struct durable_context_v2 dcontext;
+} __packed;
+
+/* See MS-SMB2 2.2.13.2.12 */
+struct durable_reconnect_context_v2 {
+ struct {
+ __u64 PersistentFileId;
+ __u64 VolatileFileId;
+ } Fid;
+ __u8 CreateGuid[16];
+ __le32 Flags; /* see above DHANDLE_FLAG_PERSISTENT */
+} __packed;
+
+/* See MS-SMB2 2.2.14.2.12 */
+struct durable_reconnect_context_v2_rsp {
+ __le32 Timeout;
+ __le32 Flags; /* see above DHANDLE_FLAG_PERSISTENT */
+} __packed;
+
+struct create_durable_handle_reconnect_v2 {
+ struct create_context ccontext;
+ __u8 Name[8];
+ struct durable_reconnect_context_v2 dcontext;
+} __packed;
+
#define COPY_CHUNK_RES_KEY_SIZE 24
struct resume_key_req {
char ResumeKey[COPY_CHUNK_RES_KEY_SIZE];
/* Integrity flags for above */
#define FSCTL_INTEGRITY_FLAG_CHECKSUM_ENFORCEMENT_OFF 0x00000001
+/* See MS-SMB2 2.2.31.3 */
+struct network_resiliency_req {
+ __le32 Timeout;
+ __le32 Reserved;
+} __packed;
+/* There is no buffer for the response ie no struct network_resiliency_rsp */
+
struct validate_negotiate_info_req {
__le32 Capabilities;
*****************************************************************
*/
extern int map_smb2_to_linux_error(char *buf, bool log_err);
-extern int smb2_check_message(char *buf, unsigned int length);
+extern int smb2_check_message(char *buf, unsigned int length,
+ struct TCP_Server_Info *server);
extern unsigned int smb2_calc_size(void *buf);
extern char *smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *hdr);
extern __le16 *cifs_convert_path_to_utf16(const char *from,
return rc;
}
-int
-generate_smb3signingkey(struct cifs_ses *ses)
+static int generate_key(struct cifs_ses *ses, struct kvec label,
+ struct kvec context, __u8 *key, unsigned int key_size)
{
unsigned char zero = 0x0;
__u8 i[4] = {0, 0, 0, 1};
unsigned char *hashptr = prfhash;
memset(prfhash, 0x0, SMB2_HMACSHA256_SIZE);
- memset(ses->smb3signingkey, 0x0, SMB3_SIGNKEY_SIZE);
+ memset(key, 0x0, key_size);
rc = smb3_crypto_shash_allocate(ses->server);
if (rc) {
}
rc = crypto_shash_update(&ses->server->secmech.sdeschmacsha256->shash,
- "SMB2AESCMAC", 12);
+ label.iov_base, label.iov_len);
if (rc) {
cifs_dbg(VFS, "%s: Could not update with label\n", __func__);
goto smb3signkey_ret;
}
rc = crypto_shash_update(&ses->server->secmech.sdeschmacsha256->shash,
- "SmbSign", 8);
+ context.iov_base, context.iov_len);
if (rc) {
cifs_dbg(VFS, "%s: Could not update with context\n", __func__);
goto smb3signkey_ret;
goto smb3signkey_ret;
}
- memcpy(ses->smb3signingkey, hashptr, SMB3_SIGNKEY_SIZE);
+ memcpy(key, hashptr, key_size);
smb3signkey_ret:
return rc;
}
+struct derivation {
+ struct kvec label;
+ struct kvec context;
+};
+
+struct derivation_triplet {
+ struct derivation signing;
+ struct derivation encryption;
+ struct derivation decryption;
+};
+
+static int
+generate_smb3signingkey(struct cifs_ses *ses,
+ const struct derivation_triplet *ptriplet)
+{
+ int rc;
+
+ rc = generate_key(ses, ptriplet->signing.label,
+ ptriplet->signing.context, ses->smb3signingkey,
+ SMB3_SIGN_KEY_SIZE);
+ if (rc)
+ return rc;
+
+ rc = generate_key(ses, ptriplet->encryption.label,
+ ptriplet->encryption.context, ses->smb3encryptionkey,
+ SMB3_SIGN_KEY_SIZE);
+ if (rc)
+ return rc;
+
+ return generate_key(ses, ptriplet->decryption.label,
+ ptriplet->decryption.context,
+ ses->smb3decryptionkey, SMB3_SIGN_KEY_SIZE);
+}
+
+int
+generate_smb30signingkey(struct cifs_ses *ses)
+
+{
+ struct derivation_triplet triplet;
+ struct derivation *d;
+
+ d = &triplet.signing;
+ d->label.iov_base = "SMB2AESCMAC";
+ d->label.iov_len = 12;
+ d->context.iov_base = "SmbSign";
+ d->context.iov_len = 8;
+
+ d = &triplet.encryption;
+ d->label.iov_base = "SMB2AESCCM";
+ d->label.iov_len = 11;
+ d->context.iov_base = "ServerIn ";
+ d->context.iov_len = 10;
+
+ d = &triplet.decryption;
+ d->label.iov_base = "SMB2AESCCM";
+ d->label.iov_len = 11;
+ d->context.iov_base = "ServerOut";
+ d->context.iov_len = 10;
+
+ return generate_smb3signingkey(ses, &triplet);
+}
+
+int
+generate_smb311signingkey(struct cifs_ses *ses)
+
+{
+ struct derivation_triplet triplet;
+ struct derivation *d;
+
+ d = &triplet.signing;
+ d->label.iov_base = "SMB2AESCMAC";
+ d->label.iov_len = 12;
+ d->context.iov_base = "SmbSign";
+ d->context.iov_len = 8;
+
+ d = &triplet.encryption;
+ d->label.iov_base = "SMB2AESCCM";
+ d->label.iov_len = 11;
+ d->context.iov_base = "ServerIn ";
+ d->context.iov_len = 10;
+
+ d = &triplet.decryption;
+ d->label.iov_base = "SMB2AESCCM";
+ d->label.iov_len = 11;
+ d->context.iov_base = "ServerOut";
+ d->context.iov_len = 10;
+
+ return generate_smb3signingkey(ses, &triplet);
+}
+
int
smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
{
#define FSCTL_SRV_ENUMERATE_SNAPSHOTS 0x00144064
/* Retrieve an opaque file reference for server-side data movement ie copy */
#define FSCTL_SRV_REQUEST_RESUME_KEY 0x00140078
-#define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */
+#define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4
#define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */
#define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */
#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204
static int dax_insert_mapping(struct inode *inode, struct buffer_head *bh,
struct vm_area_struct *vma, struct vm_fault *vmf)
{
+ struct address_space *mapping = inode->i_mapping;
sector_t sector = bh->b_blocknr << (inode->i_blkbits - 9);
unsigned long vaddr = (unsigned long)vmf->virtual_address;
void __pmem *addr;
pgoff_t size;
int error;
+ i_mmap_lock_read(mapping);
+
/*
* Check truncate didn't happen while we were allocating a block.
* If it did, this block may or may not be still allocated to the
error = vm_insert_mixed(vma, vaddr, pfn);
out:
+ i_mmap_unlock_read(mapping);
+
return error;
}
* from a read fault and we've raced with a truncate
*/
error = -EIO;
- goto unlock;
+ goto unlock_page;
}
- } else {
- i_mmap_lock_write(mapping);
}
error = get_block(inode, block, &bh, 0);
if (!error && (bh.b_size < PAGE_SIZE))
error = -EIO; /* fs corruption? */
if (error)
- goto unlock;
+ goto unlock_page;
if (!buffer_mapped(&bh) && !buffer_unwritten(&bh) && !vmf->cow_page) {
if (vmf->flags & FAULT_FLAG_WRITE) {
if (!error && (bh.b_size < PAGE_SIZE))
error = -EIO;
if (error)
- goto unlock;
+ goto unlock_page;
} else {
- i_mmap_unlock_write(mapping);
return dax_load_hole(mapping, page, vmf);
}
}
else
clear_user_highpage(new_page, vaddr);
if (error)
- goto unlock;
+ goto unlock_page;
vmf->page = page;
if (!page) {
+ i_mmap_lock_read(mapping);
/* Check we didn't race with truncate */
size = (i_size_read(inode) + PAGE_SIZE - 1) >>
PAGE_SHIFT;
if (vmf->pgoff >= size) {
+ i_mmap_unlock_read(mapping);
error = -EIO;
- goto unlock;
+ goto out;
}
}
return VM_FAULT_LOCKED;
WARN_ON_ONCE(!(vmf->flags & FAULT_FLAG_WRITE));
}
- if (!page)
- i_mmap_unlock_write(mapping);
out:
if (error == -ENOMEM)
return VM_FAULT_OOM | major;
return VM_FAULT_SIGBUS | major;
return VM_FAULT_NOPAGE | major;
- unlock:
+ unlock_page:
if (page) {
unlock_page(page);
page_cache_release(page);
- } else {
- i_mmap_unlock_write(mapping);
}
-
goto out;
}
EXPORT_SYMBOL(__dax_fault);
block = (sector_t)pgoff << (PAGE_SHIFT - blkbits);
bh.b_size = PMD_SIZE;
- i_mmap_lock_write(mapping);
length = get_block(inode, block, &bh, write);
if (length)
return VM_FAULT_SIGBUS;
+ i_mmap_lock_read(mapping);
/*
* If the filesystem isn't willing to tell us the length of a hole,
if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE)
goto fallback;
- sector = bh.b_blocknr << (blkbits - 9);
-
- if (buffer_unwritten(&bh) || buffer_new(&bh)) {
- int i;
-
- length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
- bh.b_size);
- if (length < 0) {
- result = VM_FAULT_SIGBUS;
- goto out;
- }
- if ((length < PMD_SIZE) || (pfn & PG_PMD_COLOUR))
- goto fallback;
-
- for (i = 0; i < PTRS_PER_PMD; i++)
- clear_pmem(kaddr + i * PAGE_SIZE, PAGE_SIZE);
- wmb_pmem();
- count_vm_event(PGMAJFAULT);
- mem_cgroup_count_vm_event(vma->vm_mm, PGMAJFAULT);
- result |= VM_FAULT_MAJOR;
- }
-
/*
* If we allocated new storage, make sure no process has any
* zero pages covering this hole
*/
if (buffer_new(&bh)) {
- i_mmap_unlock_write(mapping);
+ i_mmap_unlock_read(mapping);
unmap_mapping_range(mapping, pgoff << PAGE_SHIFT, PMD_SIZE, 0);
- i_mmap_lock_write(mapping);
+ i_mmap_lock_read(mapping);
}
/*
result = VM_FAULT_NOPAGE;
spin_unlock(ptl);
} else {
+ sector = bh.b_blocknr << (blkbits - 9);
length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
bh.b_size);
if (length < 0) {
if ((length < PMD_SIZE) || (pfn & PG_PMD_COLOUR))
goto fallback;
+ if (buffer_unwritten(&bh) || buffer_new(&bh)) {
+ int i;
+ for (i = 0; i < PTRS_PER_PMD; i++)
+ clear_pmem(kaddr + i * PAGE_SIZE, PAGE_SIZE);
+ wmb_pmem();
+ count_vm_event(PGMAJFAULT);
+ mem_cgroup_count_vm_event(vma->vm_mm, PGMAJFAULT);
+ result |= VM_FAULT_MAJOR;
+ }
+
result |= vmf_insert_pfn_pmd(vma, address, pmd, pfn, write);
}
out:
+ i_mmap_unlock_read(mapping);
+
if (buffer_unwritten(&bh))
complete_unwritten(&bh, !(result & VM_FAULT_ERROR));
- i_mmap_unlock_write(mapping);
-
return result;
fallback:
struct ecryptfs_cache_info *info;
info = &ecryptfs_cache_infos[i];
- if (*(info->cache))
- kmem_cache_destroy(*(info->cache));
+ kmem_cache_destroy(*(info->cache));
}
}
If unsure, say N.
config EXT4_USE_FOR_EXT2
- bool "Use ext4 for ext2/ext3 file systems"
+ bool "Use ext4 for ext2 file systems"
depends on EXT4_FS
depends on EXT2_FS=n
default y
ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
ext4_jbd2.o migrate.o mballoc.o block_validity.o move_extent.o \
mmp.o indirect.o extents_status.o xattr.o xattr_user.o \
- xattr_trusted.o inline.o readpage.o
+ xattr_trusted.o inline.o readpage.o sysfs.o
ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
/* If checksum is bad mark all blocks used to prevent allocation
* essentially implementing a per-group read-only flag. */
if (!ext4_group_desc_csum_verify(sb, block_group, gdp)) {
+ ext4_error(sb, "Checksum bad for group %u", block_group);
grp = ext4_get_group_info(sb, block_group);
if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
percpu_counter_sub(&sbi->s_freeclusters_counter,
count);
}
set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state);
- return -EIO;
+ return -EFSBADCRC;
}
memset(bh->b_data, 0, sb->s_blocksize);
start = ext4_group_first_block_no(sb, block_group);
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ if (ext4_has_feature_flex_bg(sb))
flex_bg = 1;
/* Set bits for block and inode bitmaps, and inode table */
ext4_fsblk_t blk;
ext4_fsblk_t group_first_block;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ if (ext4_has_feature_flex_bg(sb)) {
/* with FLEX_BG, the inode/block bitmaps and itable
* blocks may not be in the group at all
* so the bitmap validation will be skipped for those groups
return 0;
}
-static void ext4_validate_block_bitmap(struct super_block *sb,
- struct ext4_group_desc *desc,
- ext4_group_t block_group,
- struct buffer_head *bh)
+static int ext4_validate_block_bitmap(struct super_block *sb,
+ struct ext4_group_desc *desc,
+ ext4_group_t block_group,
+ struct buffer_head *bh)
{
ext4_fsblk_t blk;
struct ext4_group_info *grp = ext4_get_group_info(sb, block_group);
struct ext4_sb_info *sbi = EXT4_SB(sb);
- if (buffer_verified(bh) || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
- return;
+ if (buffer_verified(bh))
+ return 0;
+ if (EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
+ return -EFSCORRUPTED;
ext4_lock_group(sb, block_group);
- blk = ext4_valid_block_bitmap(sb, desc, block_group, bh);
- if (unlikely(blk != 0)) {
+ if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group,
+ desc, bh))) {
ext4_unlock_group(sb, block_group);
- ext4_error(sb, "bg %u: block %llu: invalid block bitmap",
- block_group, blk);
+ ext4_error(sb, "bg %u: bad block bitmap checksum", block_group);
if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
percpu_counter_sub(&sbi->s_freeclusters_counter,
grp->bb_free);
set_bit(EXT4_GROUP_INFO_BBITMAP_CORRUPT_BIT, &grp->bb_state);
- return;
+ return -EFSBADCRC;
}
- if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group,
- desc, bh))) {
+ blk = ext4_valid_block_bitmap(sb, desc, block_group, bh);
+ if (unlikely(blk != 0)) {
ext4_unlock_group(sb, block_group);
- ext4_error(sb, "bg %u: bad block bitmap checksum", block_group);
+ ext4_error(sb, "bg %u: block %llu: invalid block bitmap",
+ block_group, blk);
if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
percpu_counter_sub(&sbi->s_freeclusters_counter,
grp->bb_free);
set_bit(EXT4_GROUP_INFO_BBITMAP_CORRUPT_BIT, &grp->bb_state);
- return;
+ return -EFSCORRUPTED;
}
set_buffer_verified(bh);
ext4_unlock_group(sb, block_group);
+ return 0;
}
/**
struct ext4_group_desc *desc;
struct buffer_head *bh;
ext4_fsblk_t bitmap_blk;
+ int err;
desc = ext4_get_group_desc(sb, block_group, NULL);
if (!desc)
- return NULL;
+ return ERR_PTR(-EFSCORRUPTED);
bitmap_blk = ext4_block_bitmap(sb, desc);
bh = sb_getblk(sb, bitmap_blk);
if (unlikely(!bh)) {
ext4_error(sb, "Cannot get buffer for block bitmap - "
"block_group = %u, block_bitmap = %llu",
block_group, bitmap_blk);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
if (bitmap_uptodate(bh))
}
ext4_lock_group(sb, block_group);
if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
- int err;
err = ext4_init_block_bitmap(sb, bh, block_group, desc);
set_bitmap_uptodate(bh);
ext4_unlock_group(sb, block_group);
unlock_buffer(bh);
if (err)
- ext4_error(sb, "Checksum bad for grp %u", block_group);
+ goto out;
goto verify;
}
ext4_unlock_group(sb, block_group);
submit_bh(READ | REQ_META | REQ_PRIO, bh);
return bh;
verify:
- ext4_validate_block_bitmap(sb, desc, block_group, bh);
- if (buffer_verified(bh))
- return bh;
+ err = ext4_validate_block_bitmap(sb, desc, block_group, bh);
+ if (err)
+ goto out;
+ return bh;
+out:
put_bh(bh);
- return NULL;
+ return ERR_PTR(err);
}
/* Returns 0 on success, 1 on error */
return 0;
desc = ext4_get_group_desc(sb, block_group, NULL);
if (!desc)
- return 1;
+ return -EFSCORRUPTED;
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
ext4_error(sb, "Cannot read block bitmap - "
"block_group = %u, block_bitmap = %llu",
block_group, (unsigned long long) bh->b_blocknr);
- return 1;
+ return -EIO;
}
clear_buffer_new(bh);
/* Panic or remount fs read-only if block bitmap is invalid */
- ext4_validate_block_bitmap(sb, desc, block_group, bh);
- /* ...but check for error just in case errors=continue. */
- return !buffer_verified(bh);
+ return ext4_validate_block_bitmap(sb, desc, block_group, bh);
}
struct buffer_head *
ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group)
{
struct buffer_head *bh;
+ int err;
bh = ext4_read_block_bitmap_nowait(sb, block_group);
- if (!bh)
- return NULL;
- if (ext4_wait_block_bitmap(sb, block_group, bh)) {
+ if (IS_ERR(bh))
+ return bh;
+ err = ext4_wait_block_bitmap(sb, block_group, bh);
+ if (err) {
put_bh(bh);
- return NULL;
+ return ERR_PTR(err);
}
return bh;
}
desc_count += ext4_free_group_clusters(sb, gdp);
brelse(bitmap_bh);
bitmap_bh = ext4_read_block_bitmap(sb, i);
- if (bitmap_bh == NULL)
+ if (IS_ERR(bitmap_bh)) {
+ bitmap_bh = NULL;
continue;
+ }
x = ext4_count_free(bitmap_bh->b_data,
EXT4_CLUSTERS_PER_GROUP(sb) / 8);
if (group == 0)
return 1;
- if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_SPARSE_SUPER2)) {
+ if (ext4_has_feature_sparse_super2(sb)) {
if (group == le32_to_cpu(es->s_backup_bgs[0]) ||
group == le32_to_cpu(es->s_backup_bgs[1]))
return 1;
return 0;
}
- if ((group <= 1) || !EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER))
+ if ((group <= 1) || !ext4_has_feature_sparse_super(sb))
return 1;
if (!(group & 1))
return 0;
if (!ext4_bg_has_super(sb, group))
return 0;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,EXT4_FEATURE_INCOMPAT_META_BG))
+ if (ext4_has_feature_meta_bg(sb))
return le32_to_cpu(EXT4_SB(sb)->s_es->s_first_meta_bg);
else
return EXT4_SB(sb)->s_gdb_count;
le32_to_cpu(EXT4_SB(sb)->s_es->s_first_meta_bg);
unsigned long metagroup = group / EXT4_DESC_PER_BLOCK(sb);
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb,EXT4_FEATURE_INCOMPAT_META_BG) ||
- metagroup < first_meta_bg)
+ if (!ext4_has_feature_meta_bg(sb) || metagroup < first_meta_bg)
return ext4_bg_num_gdb_nometa(sb, group);
return ext4_bg_num_gdb_meta(sb,group);
/* Check for superblock and gdt backups in this group */
num = ext4_bg_has_super(sb, block_group);
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
+ if (!ext4_has_feature_meta_bg(sb) ||
block_group < le32_to_cpu(sbi->s_es->s_first_meta_bg) *
sbi->s_desc_per_block) {
if (num) {
es->s_last_error_block = cpu_to_le64(blk);
ext4_error_inode(inode, function, line, blk,
"invalid block");
- return -EIO;
+ return -EFSCORRUPTED;
}
}
return 0;
EXT4_ENCRYPT,
} ext4_direction_t;
-static int ext4_page_crypto(struct ext4_crypto_ctx *ctx,
- struct inode *inode,
+static int ext4_page_crypto(struct inode *inode,
ext4_direction_t rw,
pgoff_t index,
struct page *src_page,
else
res = crypto_ablkcipher_encrypt(req);
if (res == -EINPROGRESS || res == -EBUSY) {
- BUG_ON(req->base.data != &ecr);
wait_for_completion(&ecr.completion);
res = ecr.res;
}
if (IS_ERR(ciphertext_page))
goto errout;
ctx->w.control_page = plaintext_page;
- err = ext4_page_crypto(ctx, inode, EXT4_ENCRYPT, plaintext_page->index,
+ err = ext4_page_crypto(inode, EXT4_ENCRYPT, plaintext_page->index,
plaintext_page, ciphertext_page);
if (err) {
ciphertext_page = ERR_PTR(err);
*
* Return: Zero on success, non-zero otherwise.
*/
-int ext4_decrypt(struct ext4_crypto_ctx *ctx, struct page *page)
+int ext4_decrypt(struct page *page)
{
BUG_ON(!PageLocked(page));
- return ext4_page_crypto(ctx, page->mapping->host,
+ return ext4_page_crypto(page->mapping->host,
EXT4_DECRYPT, page->index, page, page);
}
-/*
- * Convenience function which takes care of allocating and
- * deallocating the encryption context
- */
-int ext4_decrypt_one(struct inode *inode, struct page *page)
-{
- int ret;
-
- struct ext4_crypto_ctx *ctx = ext4_get_crypto_ctx(inode);
-
- if (IS_ERR(ctx))
- return PTR_ERR(ctx);
- ret = ext4_decrypt(ctx, page);
- ext4_release_crypto_ctx(ctx);
- return ret;
-}
-
int ext4_encrypted_zeroout(struct inode *inode, struct ext4_extent *ex)
{
struct ext4_crypto_ctx *ctx;
ext4_lblk_t lblk = ex->ee_block;
ext4_fsblk_t pblk = ext4_ext_pblock(ex);
unsigned int len = ext4_ext_get_actual_len(ex);
- int err = 0;
+ int ret, err = 0;
+
+#if 0
+ ext4_msg(inode->i_sb, KERN_CRIT,
+ "ext4_encrypted_zeroout ino %lu lblk %u len %u",
+ (unsigned long) inode->i_ino, lblk, len);
+#endif
BUG_ON(inode->i_sb->s_blocksize != PAGE_CACHE_SIZE);
}
while (len--) {
- err = ext4_page_crypto(ctx, inode, EXT4_ENCRYPT, lblk,
+ err = ext4_page_crypto(inode, EXT4_ENCRYPT, lblk,
ZERO_PAGE(0), ciphertext_page);
if (err)
goto errout;
goto errout;
}
bio->bi_bdev = inode->i_sb->s_bdev;
- bio->bi_iter.bi_sector = pblk;
- err = bio_add_page(bio, ciphertext_page,
+ bio->bi_iter.bi_sector =
+ pblk << (inode->i_sb->s_blocksize_bits - 9);
+ ret = bio_add_page(bio, ciphertext_page,
inode->i_sb->s_blocksize, 0);
- if (err) {
+ if (ret != inode->i_sb->s_blocksize) {
+ /* should never happen! */
+ ext4_msg(inode->i_sb, KERN_ERR,
+ "bio_add_page failed: %d", ret);
+ WARN_ON(1);
bio_put(bio);
+ err = -EIO;
goto errout;
}
err = submit_bio_wait(WRITE, bio);
+ if ((err == 0) && bio->bi_error)
+ err = -EIO;
bio_put(bio);
if (err)
goto errout;
+ lblk++; pblk++;
}
err = 0;
errout:
ablkcipher_request_set_crypt(req, &src_sg, &dst_sg, ciphertext_len, iv);
res = crypto_ablkcipher_encrypt(req);
if (res == -EINPROGRESS || res == -EBUSY) {
- BUG_ON(req->base.data != &ecr);
wait_for_completion(&ecr.completion);
res = ecr.res;
}
ablkcipher_request_set_crypt(req, &src_sg, &dst_sg, iname->len, iv);
res = crypto_ablkcipher_decrypt(req);
if (res == -EINPROGRESS || res == -EBUSY) {
- BUG_ON(req->base.data != &ecr);
wait_for_completion(&ecr.completion);
res = ecr.res;
}
EXT4_AES_256_XTS_KEY_SIZE, NULL);
res = crypto_ablkcipher_encrypt(req);
if (res == -EINPROGRESS || res == -EBUSY) {
- BUG_ON(req->base.data != &ecr);
wait_for_completion(&ecr.completion);
res = ecr.res;
}
goto out;
}
crypt_info->ci_keyring_key = keyring_key;
- BUG_ON(keyring_key->type != &key_type_logon);
+ if (keyring_key->type != &key_type_logon) {
+ printk_once(KERN_WARNING
+ "ext4: key type must be logon\n");
+ res = -ENOKEY;
+ goto out;
+ }
ukp = ((struct user_key_payload *)keyring_key->payload.data);
if (ukp->datalen != sizeof(struct ext4_encryption_key)) {
res = -EINVAL;
master_key = (struct ext4_encryption_key *)ukp->data;
BUILD_BUG_ON(EXT4_AES_128_ECB_KEY_SIZE !=
EXT4_KEY_DERIVATION_NONCE_SIZE);
- BUG_ON(master_key->size != EXT4_AES_256_XTS_KEY_SIZE);
+ if (master_key->size != EXT4_AES_256_XTS_KEY_SIZE) {
+ printk_once(KERN_WARNING
+ "ext4: key size incorrect: %d\n",
+ master_key->size);
+ res = -ENOKEY;
+ goto out;
+ }
res = ext4_derive_key_aes(ctx.nonce, master_key->raw,
raw_key);
if (res)
if ((parent == NULL) || (child == NULL)) {
pr_err("parent %p child %p\n", parent, child);
- BUG_ON(1);
+ WARN_ON(1); /* Should never happen */
+ return 0;
}
/* no restrictions if the parent directory is not encrypted */
if (!ext4_encrypted_inode(parent))
{
struct super_block *sb = inode->i_sb;
- if (EXT4_HAS_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_COMPAT_DIR_INDEX) &&
+ if (ext4_has_feature_dir_index(inode->i_sb) &&
((ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) ||
((inode->i_size >> sb->s_blocksize_bits) == 1) ||
ext4_has_inline_data(inode)))
while ((char *) de < top) {
if (ext4_check_dir_entry(dir, NULL, de, bh,
buf, buf_size, offset))
- return -EIO;
+ return -EFSCORRUPTED;
nlen = EXT4_DIR_REC_LEN(de->name_len);
rlen = ext4_rec_len_from_disk(de->rec_len, buf_size);
de = (struct ext4_dir_entry_2 *)((char *)de + rlen);
offset += rlen;
}
if ((char *) de > top)
- return -EIO;
+ return -EFSCORRUPTED;
return 0;
}
#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
#define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
+#define EXT4_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define EXT4_RESERVED_FL 0x80000000 /* reserved for ext4 lib */
#define EXT4_FL_USER_VISIBLE 0x004BDFFF /* User visible flags */
EXT4_INODE_EA_INODE = 21, /* Inode used for large EA */
EXT4_INODE_EOFBLOCKS = 22, /* Blocks allocated beyond EOF */
EXT4_INODE_INLINE_DATA = 28, /* Data in inode. */
+ EXT4_INODE_PROJINHERIT = 29, /* Create with parents projid */
EXT4_INODE_RESERVED = 31, /* reserved for ext4 lib */
};
CHECK_FLAG_VALUE(EA_INODE);
CHECK_FLAG_VALUE(EOFBLOCKS);
CHECK_FLAG_VALUE(INLINE_DATA);
+ CHECK_FLAG_VALUE(PROJINHERIT);
CHECK_FLAG_VALUE(RESERVED);
}
__le32 i_crtime; /* File Creation time */
__le32 i_crtime_extra; /* extra FileCreationtime (nsec << 2 | epoch) */
__le32 i_version_hi; /* high 32 bits for 64-bit version */
+ __le32 i_projid; /* Project ID */
};
struct move_extent {
#define EXT4_MOUNT2_HURD_COMPAT 0x00000004 /* Support HURD-castrated
file systems */
+#define EXT4_MOUNT2_EXPLICIT_JOURNAL_CHECKSUM 0x00000008 /* User explicitly
+ specified journal checksum */
+
#define clear_opt(sb, opt) EXT4_SB(sb)->s_mount_opt &= \
~EXT4_MOUNT_##opt
#define set_opt(sb, opt) EXT4_SB(sb)->s_mount_opt |= \
__u8 s_encrypt_algos[4]; /* Encryption algorithms in use */
__u8 s_encrypt_pw_salt[16]; /* Salt used for string2key algorithm */
__le32 s_lpf_ino; /* Location of the lost+found inode */
- __le32 s_reserved[100]; /* Padding to the end of the block */
+ __le32 s_prj_quota_inum; /* inode for tracking project quota */
+ __le32 s_checksum_seed; /* crc32c(uuid) if csum_seed set */
+ __le32 s_reserved[98]; /* Padding to the end of the block */
__le32 s_checksum; /* crc32c(superblock) */
};
* Feature set definitions
*/
+/* Use the ext4_{has,set,clear}_feature_* helpers; these will be removed */
#define EXT4_HAS_COMPAT_FEATURE(sb,mask) \
((EXT4_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask)) != 0)
#define EXT4_HAS_RO_COMPAT_FEATURE(sb,mask) \
*/
#define EXT4_FEATURE_RO_COMPAT_METADATA_CSUM 0x0400
#define EXT4_FEATURE_RO_COMPAT_READONLY 0x1000
+#define EXT4_FEATURE_RO_COMPAT_PROJECT 0x2000
#define EXT4_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT4_FEATURE_INCOMPAT_FILETYPE 0x0002
#define EXT4_FEATURE_INCOMPAT_FLEX_BG 0x0200
#define EXT4_FEATURE_INCOMPAT_EA_INODE 0x0400 /* EA in inode */
#define EXT4_FEATURE_INCOMPAT_DIRDATA 0x1000 /* data in dirent */
-#define EXT4_FEATURE_INCOMPAT_BG_USE_META_CSUM 0x2000 /* use crc32c for bg */
+#define EXT4_FEATURE_INCOMPAT_CSUM_SEED 0x2000
#define EXT4_FEATURE_INCOMPAT_LARGEDIR 0x4000 /* >2GB or 3-lvl htree */
#define EXT4_FEATURE_INCOMPAT_INLINE_DATA 0x8000 /* data in inode */
#define EXT4_FEATURE_INCOMPAT_ENCRYPT 0x10000
+#define EXT4_FEATURE_COMPAT_FUNCS(name, flagname) \
+static inline bool ext4_has_feature_##name(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_compat & \
+ cpu_to_le32(EXT4_FEATURE_COMPAT_##flagname)) != 0); \
+} \
+static inline void ext4_set_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_compat |= \
+ cpu_to_le32(EXT4_FEATURE_COMPAT_##flagname); \
+} \
+static inline void ext4_clear_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_compat &= \
+ ~cpu_to_le32(EXT4_FEATURE_COMPAT_##flagname); \
+}
+
+#define EXT4_FEATURE_RO_COMPAT_FUNCS(name, flagname) \
+static inline bool ext4_has_feature_##name(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_ro_compat & \
+ cpu_to_le32(EXT4_FEATURE_RO_COMPAT_##flagname)) != 0); \
+} \
+static inline void ext4_set_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_ro_compat |= \
+ cpu_to_le32(EXT4_FEATURE_RO_COMPAT_##flagname); \
+} \
+static inline void ext4_clear_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_ro_compat &= \
+ ~cpu_to_le32(EXT4_FEATURE_RO_COMPAT_##flagname); \
+}
+
+#define EXT4_FEATURE_INCOMPAT_FUNCS(name, flagname) \
+static inline bool ext4_has_feature_##name(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_incompat & \
+ cpu_to_le32(EXT4_FEATURE_INCOMPAT_##flagname)) != 0); \
+} \
+static inline void ext4_set_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_incompat |= \
+ cpu_to_le32(EXT4_FEATURE_INCOMPAT_##flagname); \
+} \
+static inline void ext4_clear_feature_##name(struct super_block *sb) \
+{ \
+ EXT4_SB(sb)->s_es->s_feature_incompat &= \
+ ~cpu_to_le32(EXT4_FEATURE_INCOMPAT_##flagname); \
+}
+
+EXT4_FEATURE_COMPAT_FUNCS(dir_prealloc, DIR_PREALLOC)
+EXT4_FEATURE_COMPAT_FUNCS(imagic_inodes, IMAGIC_INODES)
+EXT4_FEATURE_COMPAT_FUNCS(journal, HAS_JOURNAL)
+EXT4_FEATURE_COMPAT_FUNCS(xattr, EXT_ATTR)
+EXT4_FEATURE_COMPAT_FUNCS(resize_inode, RESIZE_INODE)
+EXT4_FEATURE_COMPAT_FUNCS(dir_index, DIR_INDEX)
+EXT4_FEATURE_COMPAT_FUNCS(sparse_super2, SPARSE_SUPER2)
+
+EXT4_FEATURE_RO_COMPAT_FUNCS(sparse_super, SPARSE_SUPER)
+EXT4_FEATURE_RO_COMPAT_FUNCS(large_file, LARGE_FILE)
+EXT4_FEATURE_RO_COMPAT_FUNCS(btree_dir, BTREE_DIR)
+EXT4_FEATURE_RO_COMPAT_FUNCS(huge_file, HUGE_FILE)
+EXT4_FEATURE_RO_COMPAT_FUNCS(gdt_csum, GDT_CSUM)
+EXT4_FEATURE_RO_COMPAT_FUNCS(dir_nlink, DIR_NLINK)
+EXT4_FEATURE_RO_COMPAT_FUNCS(extra_isize, EXTRA_ISIZE)
+EXT4_FEATURE_RO_COMPAT_FUNCS(quota, QUOTA)
+EXT4_FEATURE_RO_COMPAT_FUNCS(bigalloc, BIGALLOC)
+EXT4_FEATURE_RO_COMPAT_FUNCS(metadata_csum, METADATA_CSUM)
+EXT4_FEATURE_RO_COMPAT_FUNCS(readonly, READONLY)
+EXT4_FEATURE_RO_COMPAT_FUNCS(project, PROJECT)
+
+EXT4_FEATURE_INCOMPAT_FUNCS(compression, COMPRESSION)
+EXT4_FEATURE_INCOMPAT_FUNCS(filetype, FILETYPE)
+EXT4_FEATURE_INCOMPAT_FUNCS(journal_needs_recovery, RECOVER)
+EXT4_FEATURE_INCOMPAT_FUNCS(journal_dev, JOURNAL_DEV)
+EXT4_FEATURE_INCOMPAT_FUNCS(meta_bg, META_BG)
+EXT4_FEATURE_INCOMPAT_FUNCS(extents, EXTENTS)
+EXT4_FEATURE_INCOMPAT_FUNCS(64bit, 64BIT)
+EXT4_FEATURE_INCOMPAT_FUNCS(mmp, MMP)
+EXT4_FEATURE_INCOMPAT_FUNCS(flex_bg, FLEX_BG)
+EXT4_FEATURE_INCOMPAT_FUNCS(ea_inode, EA_INODE)
+EXT4_FEATURE_INCOMPAT_FUNCS(dirdata, DIRDATA)
+EXT4_FEATURE_INCOMPAT_FUNCS(csum_seed, CSUM_SEED)
+EXT4_FEATURE_INCOMPAT_FUNCS(largedir, LARGEDIR)
+EXT4_FEATURE_INCOMPAT_FUNCS(inline_data, INLINE_DATA)
+EXT4_FEATURE_INCOMPAT_FUNCS(encrypt, ENCRYPT)
+
#define EXT2_FEATURE_COMPAT_SUPP EXT4_FEATURE_COMPAT_EXT_ATTR
#define EXT2_FEATURE_INCOMPAT_SUPP (EXT4_FEATURE_INCOMPAT_FILETYPE| \
EXT4_FEATURE_INCOMPAT_META_BG)
EXT4_FEATURE_RO_COMPAT_LARGE_FILE| \
EXT4_FEATURE_RO_COMPAT_BTREE_DIR)
-#define EXT4_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR
+#define EXT4_FEATURE_COMPAT_SUPP EXT4_FEATURE_COMPAT_EXT_ATTR
#define EXT4_FEATURE_INCOMPAT_SUPP (EXT4_FEATURE_INCOMPAT_FILETYPE| \
EXT4_FEATURE_INCOMPAT_RECOVER| \
EXT4_FEATURE_INCOMPAT_META_BG| \
EXT4_FEATURE_INCOMPAT_FLEX_BG| \
EXT4_FEATURE_INCOMPAT_MMP | \
EXT4_FEATURE_INCOMPAT_INLINE_DATA | \
- EXT4_FEATURE_INCOMPAT_ENCRYPT)
+ EXT4_FEATURE_INCOMPAT_ENCRYPT | \
+ EXT4_FEATURE_INCOMPAT_CSUM_SEED)
#define EXT4_FEATURE_RO_COMPAT_SUPP (EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER| \
EXT4_FEATURE_RO_COMPAT_LARGE_FILE| \
EXT4_FEATURE_RO_COMPAT_GDT_CSUM| \
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM|\
EXT4_FEATURE_RO_COMPAT_QUOTA)
+#define EXTN_FEATURE_FUNCS(ver) \
+static inline bool ext4_has_unknown_ext##ver##_compat_features(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_compat & \
+ cpu_to_le32(~EXT##ver##_FEATURE_COMPAT_SUPP)) != 0); \
+} \
+static inline bool ext4_has_unknown_ext##ver##_ro_compat_features(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_ro_compat & \
+ cpu_to_le32(~EXT##ver##_FEATURE_RO_COMPAT_SUPP)) != 0); \
+} \
+static inline bool ext4_has_unknown_ext##ver##_incompat_features(struct super_block *sb) \
+{ \
+ return ((EXT4_SB(sb)->s_es->s_feature_incompat & \
+ cpu_to_le32(~EXT##ver##_FEATURE_INCOMPAT_SUPP)) != 0); \
+}
+
+EXTN_FEATURE_FUNCS(2)
+EXTN_FEATURE_FUNCS(3)
+EXTN_FEATURE_FUNCS(4)
+
+static inline bool ext4_has_compat_features(struct super_block *sb)
+{
+ return (EXT4_SB(sb)->s_es->s_feature_compat != 0);
+}
+static inline bool ext4_has_ro_compat_features(struct super_block *sb)
+{
+ return (EXT4_SB(sb)->s_es->s_feature_ro_compat != 0);
+}
+static inline bool ext4_has_incompat_features(struct super_block *sb)
+{
+ return (EXT4_SB(sb)->s_es->s_feature_incompat != 0);
+}
+
/*
* Default values for user and/or group using reserved blocks
*/
* (c) Daniel Phillips, 2001
*/
-#define is_dx(dir) (EXT4_HAS_COMPAT_FEATURE(dir->i_sb, \
- EXT4_FEATURE_COMPAT_DIR_INDEX) && \
+#define is_dx(dir) (ext4_has_feature_dir_index((dir)->i_sb) && \
ext4_test_inode_flag((dir), EXT4_INODE_INDEX))
#define EXT4_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT4_LINK_MAX)
#define EXT4_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1)
void ext4_restore_control_page(struct page *data_page);
struct page *ext4_encrypt(struct inode *inode,
struct page *plaintext_page);
-int ext4_decrypt(struct ext4_crypto_ctx *ctx, struct page *page);
-int ext4_decrypt_one(struct inode *inode, struct page *page);
+int ext4_decrypt(struct page *page);
int ext4_encrypted_zeroout(struct inode *inode, struct ext4_extent *ex);
#ifdef CONFIG_EXT4_FS_ENCRYPTION
void ext4_exit_crypto(void);
static inline int ext4_sb_has_crypto(struct super_block *sb)
{
- return EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_ENCRYPT);
+ return ext4_has_feature_encrypt(sb);
}
#else
static inline int ext4_init_crypto(void) { return 0; }
struct ext4_filename *fname);
static inline void ext4_update_dx_flag(struct inode *inode)
{
- if (!EXT4_HAS_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_COMPAT_DIR_INDEX))
+ if (!ext4_has_feature_dir_index(inode->i_sb))
ext4_clear_inode_flag(inode, EXT4_INODE_INDEX);
}
static unsigned char ext4_filetype_table[] = {
static inline unsigned char get_dtype(struct super_block *sb, int filetype)
{
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FILETYPE) ||
- (filetype >= EXT4_FT_MAX))
+ if (!ext4_has_feature_filetype(sb) || filetype >= EXT4_FT_MAX)
return DT_UNKNOWN;
return ext4_filetype_table[filetype];
extern void ext4_end_bitmap_read(struct buffer_head *bh, int uptodate);
/* mballoc.c */
+extern const struct file_operations ext4_seq_mb_groups_fops;
extern long ext4_mb_stats;
extern long ext4_mb_max_to_scan;
extern int ext4_mb_init(struct super_block *);
extern int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count);
/* super.c */
+extern int ext4_seq_options_show(struct seq_file *seq, void *offset);
extern int ext4_calculate_overhead(struct super_block *sb);
extern void ext4_superblock_csum_set(struct super_block *sb);
extern void *ext4_kvmalloc(size_t size, gfp_t flags);
static inline int ext4_has_group_desc_csum(struct super_block *sb)
{
- return EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_GDT_CSUM) ||
- (EXT4_SB(sb)->s_chksum_driver != NULL);
+ return ext4_has_feature_gdt_csum(sb) ||
+ EXT4_SB(sb)->s_chksum_driver != NULL;
}
static inline int ext4_has_metadata_csum(struct super_block *sb)
{
- WARN_ON_ONCE(EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
+ WARN_ON_ONCE(ext4_has_feature_metadata_csum(sb) &&
!EXT4_SB(sb)->s_chksum_driver);
return (EXT4_SB(sb)->s_chksum_driver != NULL);
static inline void ext4_set_de_type(struct super_block *sb,
struct ext4_dir_entry_2 *de,
umode_t mode) {
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FILETYPE))
+ if (ext4_has_feature_filetype(sb))
de->file_type = ext4_type_by_mode[(mode & S_IFMT)>>S_SHIFT];
}
extern const struct inode_operations ext4_symlink_inode_operations;
extern const struct inode_operations ext4_fast_symlink_inode_operations;
+/* sysfs.c */
+extern int ext4_register_sysfs(struct super_block *sb);
+extern void ext4_unregister_sysfs(struct super_block *sb);
+extern int __init ext4_init_sysfs(void);
+extern void ext4_exit_sysfs(void);
+
/* block_validity */
extern void ext4_release_system_zone(struct super_block *sb);
extern int ext4_setup_system_zone(struct super_block *sb);
#endif /* __KERNEL__ */
+#define EFSBADCRC EBADMSG /* Bad CRC detected */
+#define EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
+
#endif /* _EXT4_H */
return 0;
}
+ err = handle->h_err;
if (!handle->h_transaction) {
- err = jbd2_journal_stop(handle);
- return handle->h_err ? handle->h_err : err;
+ rc = jbd2_journal_stop(handle);
+ return err ? err : rc;
}
sb = handle->h_transaction->t_journal->j_private;
- err = handle->h_err;
rc = jbd2_journal_stop(handle);
if (!err)
*/
#define EXT4_SINGLEDATA_TRANS_BLOCKS(sb) \
- (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS) \
- ? 20U : 8U)
+ (ext4_has_feature_extents(sb) ? 20U : 8U)
/* Extended attribute operations touch at most two data buffers,
* two bitmap buffers, and two group summaries, in addition to the inode
/* Amount of blocks needed for quota update - we know that the structure was
* allocated so we need to update only data block */
#define EXT4_QUOTA_TRANS_BLOCKS(sb) ((test_opt(sb, QUOTA) ||\
- EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA)) ?\
- 1 : 0)
+ ext4_has_feature_quota(sb)) ? 1 : 0)
/* Amount of blocks needed for quota insert/delete - we do some block writes
* but inode, sb and group updates are done only once */
#define EXT4_QUOTA_INIT_BLOCKS(sb) ((test_opt(sb, QUOTA) ||\
- EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA)) ?\
+ ext4_has_feature_quota(sb)) ?\
(DQUOT_INIT_ALLOC*(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)\
+3+DQUOT_INIT_REWRITE) : 0)
#define EXT4_QUOTA_DEL_BLOCKS(sb) ((test_opt(sb, QUOTA) ||\
- EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA)) ?\
+ ext4_has_feature_quota(sb)) ?\
(DQUOT_DEL_ALLOC*(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)\
+3+DQUOT_DEL_REWRITE) : 0)
#else
int depth, ext4_fsblk_t pblk)
{
const char *error_msg;
- int max = 0;
+ int max = 0, err = -EFSCORRUPTED;
if (unlikely(eh->eh_magic != EXT4_EXT_MAGIC)) {
error_msg = "invalid magic";
if (ext_depth(inode) != depth &&
!ext4_extent_block_csum_verify(inode, eh)) {
error_msg = "extent tree corrupted";
+ err = -EFSBADCRC;
goto corrupted;
}
return 0;
le16_to_cpu(eh->eh_magic),
le16_to_cpu(eh->eh_entries), le16_to_cpu(eh->eh_max),
max, le16_to_cpu(eh->eh_depth), depth);
- return -EIO;
+ return err;
}
#define ext4_ext_check(inode, eh, depth, pblk) \
put_bh(bh);
EXT4_ERROR_INODE(inode,
"ppos %d > depth %d", ppos, depth);
- ret = -EIO;
+ ret = -EFSCORRUPTED;
goto err;
}
path[ppos].p_bh = bh;
EXT4_ERROR_INODE(inode,
"logical %d == ei_block %d!",
logical, le32_to_cpu(curp->p_idx->ei_block));
- return -EIO;
+ return -EFSCORRUPTED;
}
if (unlikely(le16_to_cpu(curp->p_hdr->eh_entries)
"eh_entries %d >= eh_max %d!",
le16_to_cpu(curp->p_hdr->eh_entries),
le16_to_cpu(curp->p_hdr->eh_max));
- return -EIO;
+ return -EFSCORRUPTED;
}
if (logical > le32_to_cpu(curp->p_idx->ei_block)) {
if (unlikely(ix > EXT_MAX_INDEX(curp->p_hdr))) {
EXT4_ERROR_INODE(inode, "ix > EXT_MAX_INDEX!");
- return -EIO;
+ return -EFSCORRUPTED;
}
ix->ei_block = cpu_to_le32(logical);
if (unlikely(ix > EXT_LAST_INDEX(curp->p_hdr))) {
EXT4_ERROR_INODE(inode, "ix > EXT_LAST_INDEX!");
- return -EIO;
+ return -EFSCORRUPTED;
}
err = ext4_ext_dirty(handle, inode, curp);
* border from split point */
if (unlikely(path[depth].p_ext > EXT_MAX_EXTENT(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode, "p_ext > EXT_MAX_EXTENT!");
- return -EIO;
+ return -EFSCORRUPTED;
}
if (path[depth].p_ext != EXT_MAX_EXTENT(path[depth].p_hdr)) {
border = path[depth].p_ext[1].ee_block;
newblock = ablocks[--a];
if (unlikely(newblock == 0)) {
EXT4_ERROR_INODE(inode, "newblock == 0!");
- err = -EIO;
+ err = -EFSCORRUPTED;
goto cleanup;
}
bh = sb_getblk_gfp(inode->i_sb, newblock, __GFP_MOVABLE | GFP_NOFS);
EXT4_ERROR_INODE(inode, "eh_entries %d != eh_max %d!",
path[depth].p_hdr->eh_entries,
path[depth].p_hdr->eh_max);
- err = -EIO;
+ err = -EFSCORRUPTED;
goto cleanup;
}
/* start copy from next extent */
k = depth - at - 1;
if (unlikely(k < 0)) {
EXT4_ERROR_INODE(inode, "k %d < 0!", k);
- err = -EIO;
+ err = -EFSCORRUPTED;
goto cleanup;
}
if (k)
EXT4_ERROR_INODE(inode,
"EXT_MAX_INDEX != EXT_LAST_INDEX ee_block %d!",
le32_to_cpu(path[i].p_ext->ee_block));
- err = -EIO;
+ err = -EFSCORRUPTED;
goto cleanup;
}
/* start copy indexes */
if (unlikely(path == NULL)) {
EXT4_ERROR_INODE(inode, "path == NULL *logical %d!", *logical);
- return -EIO;
+ return -EFSCORRUPTED;
}
depth = path->p_depth;
*phys = 0;
EXT4_ERROR_INODE(inode,
"EXT_FIRST_EXTENT != ex *logical %d ee_block %d!",
*logical, le32_to_cpu(ex->ee_block));
- return -EIO;
+ return -EFSCORRUPTED;
}
while (--depth >= 0) {
ix = path[depth].p_idx;
EXT_FIRST_INDEX(path[depth].p_hdr) != NULL ?
le32_to_cpu(EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block) : 0,
depth);
- return -EIO;
+ return -EFSCORRUPTED;
}
}
return 0;
EXT4_ERROR_INODE(inode,
"logical %d < ee_block %d + ee_len %d!",
*logical, le32_to_cpu(ex->ee_block), ee_len);
- return -EIO;
+ return -EFSCORRUPTED;
}
*logical = le32_to_cpu(ex->ee_block) + ee_len - 1;
if (unlikely(path == NULL)) {
EXT4_ERROR_INODE(inode, "path == NULL *logical %d!", *logical);
- return -EIO;
+ return -EFSCORRUPTED;
}
depth = path->p_depth;
*phys = 0;
EXT4_ERROR_INODE(inode,
"first_extent(path[%d].p_hdr) != ex",
depth);
- return -EIO;
+ return -EFSCORRUPTED;
}
while (--depth >= 0) {
ix = path[depth].p_idx;
EXT4_ERROR_INODE(inode,
"ix != EXT_FIRST_INDEX *logical %d!",
*logical);
- return -EIO;
+ return -EFSCORRUPTED;
}
}
goto found_extent;
EXT4_ERROR_INODE(inode,
"logical %d < ee_block %d + ee_len %d!",
*logical, le32_to_cpu(ex->ee_block), ee_len);
- return -EIO;
+ return -EFSCORRUPTED;
}
if (ex != EXT_LAST_EXTENT(path[depth].p_hdr)) {
if (unlikely(ex == NULL || eh == NULL)) {
EXT4_ERROR_INODE(inode,
"ex %p == NULL or eh %p == NULL", ex, eh);
- return -EIO;
+ return -EFSCORRUPTED;
}
if (depth == 0) {
mb_flags |= EXT4_MB_DELALLOC_RESERVED;
if (unlikely(ext4_ext_get_actual_len(newext) == 0)) {
EXT4_ERROR_INODE(inode, "ext4_ext_get_actual_len(newext) == 0");
- return -EIO;
+ return -EFSCORRUPTED;
}
depth = ext_depth(inode);
ex = path[depth].p_ext;
eh = path[depth].p_hdr;
if (unlikely(path[depth].p_hdr == NULL)) {
EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
- return -EIO;
+ return -EFSCORRUPTED;
}
/* try to insert block into found extent and return */
if (unlikely(path[depth].p_hdr == NULL)) {
up_read(&EXT4_I(inode)->i_data_sem);
EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
- err = -EIO;
+ err = -EFSCORRUPTED;
break;
}
ex = path[depth].p_ext;
if (unlikely(es.es_len == 0)) {
EXT4_ERROR_INODE(inode, "es.es_len == 0");
- err = -EIO;
+ err = -EFSCORRUPTED;
break;
}
"next extent == %u, next "
"delalloc extent = %u",
next, next_del);
- err = -EIO;
+ err = -EFSCORRUPTED;
break;
}
}
leaf = ext4_idx_pblock(path->p_idx);
if (unlikely(path->p_hdr->eh_entries == 0)) {
EXT4_ERROR_INODE(inode, "path->p_hdr->eh_entries == 0");
- return -EIO;
+ return -EFSCORRUPTED;
}
err = ext4_ext_get_access(handle, inode, path);
if (err)
eh = path[depth].p_hdr;
if (unlikely(path[depth].p_hdr == NULL)) {
EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
- return -EIO;
+ return -EFSCORRUPTED;
}
/* find where to start removing */
ex = path[depth].p_ext;
"on extent %u:%u",
start, end, ex_ee_block,
ex_ee_block + ex_ee_len - 1);
- err = -EIO;
+ err = -EFSCORRUPTED;
goto out;
} else if (a != ex_ee_block) {
/* remove tail of the extent */
EXT4_ERROR_INODE(inode,
"path[%d].p_hdr == NULL",
depth);
- err = -EIO;
+ err = -EFSCORRUPTED;
}
goto out;
}
i = 0;
if (ext4_ext_check(inode, path[0].p_hdr, depth, 0)) {
- err = -EIO;
+ err = -EFSCORRUPTED;
goto out;
}
}
* Should be a no-op if we did IO above. */
cond_resched();
if (WARN_ON(i + 1 > depth)) {
- err = -EIO;
+ err = -EFSCORRUPTED;
break;
}
path[i + 1].p_bh = bh;
* possible initialization would be here
*/
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ if (ext4_has_feature_extents(sb)) {
#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
printk(KERN_INFO "EXT4-fs: file extents enabled"
#ifdef AGGRESSIVE_TEST
*/
void ext4_ext_release(struct super_block *sb)
{
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS))
+ if (!ext4_has_feature_extents(sb))
return;
#ifdef EXTENTS_STATS
if (!ex) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) map->m_lblk);
- return -EIO;
+ return -EFSCORRUPTED;
}
unwritten = ext4_ext_is_unwritten(ex);
split_flag1 = 0;
max_zeroout = sbi->s_extent_max_zeroout_kb >>
(inode->i_sb->s_blocksize_bits - 10);
+ if (ext4_encrypted_inode(inode))
+ max_zeroout = 0;
+
/* If extent is less than s_max_zeroout_kb, zeroout directly */
if (max_zeroout && (ee_len <= max_zeroout)) {
err = ext4_ext_zeroout(inode, ex);
if (!ex) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) map->m_lblk);
- return -EIO;
+ return -EFSCORRUPTED;
}
}
"lblock: %lu, depth: %d pblock %lld",
(unsigned long) map->m_lblk, depth,
path[depth].p_block);
- err = -EIO;
+ err = -EFSCORRUPTED;
goto out2;
}
if (depth == path->p_depth) {
ex_start = path[depth].p_ext;
if (!ex_start)
- return -EIO;
+ return -EFSCORRUPTED;
ex_last = EXT_LAST_EXTENT(path[depth].p_hdr);
if (!extent) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) *iterator);
- return -EIO;
+ return -EFSCORRUPTED;
}
if (SHIFT == SHIFT_LEFT && *iterator >
le32_to_cpu(extent->ee_block)) {
return nr_shrunk;
}
-static void *ext4_es_seq_shrinker_info_start(struct seq_file *seq, loff_t *pos)
+int ext4_seq_es_shrinker_info_show(struct seq_file *seq, void *v)
{
- return *pos ? NULL : SEQ_START_TOKEN;
-}
-
-static void *
-ext4_es_seq_shrinker_info_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return NULL;
-}
-
-static int ext4_es_seq_shrinker_info_show(struct seq_file *seq, void *v)
-{
- struct ext4_sb_info *sbi = seq->private;
+ struct ext4_sb_info *sbi = EXT4_SB((struct super_block *) seq->private);
struct ext4_es_stats *es_stats = &sbi->s_es_stats;
struct ext4_inode_info *ei, *max = NULL;
unsigned int inode_cnt = 0;
return 0;
}
-static void ext4_es_seq_shrinker_info_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations ext4_es_seq_shrinker_info_ops = {
- .start = ext4_es_seq_shrinker_info_start,
- .next = ext4_es_seq_shrinker_info_next,
- .stop = ext4_es_seq_shrinker_info_stop,
- .show = ext4_es_seq_shrinker_info_show,
-};
-
-static int
-ext4_es_seq_shrinker_info_open(struct inode *inode, struct file *file)
-{
- int ret;
-
- ret = seq_open(file, &ext4_es_seq_shrinker_info_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = PDE_DATA(inode);
- }
-
- return ret;
-}
-
-static int
-ext4_es_seq_shrinker_info_release(struct inode *inode, struct file *file)
-{
- return seq_release(inode, file);
-}
-
-static const struct file_operations ext4_es_seq_shrinker_info_fops = {
- .owner = THIS_MODULE,
- .open = ext4_es_seq_shrinker_info_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = ext4_es_seq_shrinker_info_release,
-};
-
int ext4_es_register_shrinker(struct ext4_sb_info *sbi)
{
int err;
if (err)
goto err2;
- if (sbi->s_proc)
- proc_create_data("es_shrinker_info", S_IRUGO, sbi->s_proc,
- &ext4_es_seq_shrinker_info_fops, sbi);
-
return 0;
err2:
void ext4_es_unregister_shrinker(struct ext4_sb_info *sbi)
{
- if (sbi->s_proc)
- remove_proc_entry("es_shrinker_info", sbi->s_proc);
percpu_counter_destroy(&sbi->s_es_stats.es_stats_all_cnt);
percpu_counter_destroy(&sbi->s_es_stats.es_stats_shk_cnt);
unregister_shrinker(&sbi->s_es_shrinker);
extern int ext4_es_register_shrinker(struct ext4_sb_info *sbi);
extern void ext4_es_unregister_shrinker(struct ext4_sb_info *sbi);
+extern int ext4_seq_es_shrinker_info_show(struct seq_file *seq, void *v);
+
#endif /* _EXT4_EXTENTS_STATUS_H */
}
/* Initializes an uninitialized inode bitmap */
-static unsigned ext4_init_inode_bitmap(struct super_block *sb,
+static int ext4_init_inode_bitmap(struct super_block *sb,
struct buffer_head *bh,
ext4_group_t block_group,
struct ext4_group_desc *gdp)
count);
}
set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state);
- return 0;
+ return -EFSBADCRC;
}
memset(bh->b_data, 0, (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
EXT4_INODES_PER_GROUP(sb) / 8);
ext4_group_desc_csum_set(sb, block_group, gdp);
- return EXT4_INODES_PER_GROUP(sb);
+ return 0;
}
void ext4_end_bitmap_read(struct buffer_head *bh, int uptodate)
put_bh(bh);
}
+static int ext4_validate_inode_bitmap(struct super_block *sb,
+ struct ext4_group_desc *desc,
+ ext4_group_t block_group,
+ struct buffer_head *bh)
+{
+ ext4_fsblk_t blk;
+ struct ext4_group_info *grp = ext4_get_group_info(sb, block_group);
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+
+ if (buffer_verified(bh))
+ return 0;
+ if (EXT4_MB_GRP_IBITMAP_CORRUPT(grp))
+ return -EFSCORRUPTED;
+
+ ext4_lock_group(sb, block_group);
+ blk = ext4_inode_bitmap(sb, desc);
+ if (!ext4_inode_bitmap_csum_verify(sb, block_group, desc, bh,
+ EXT4_INODES_PER_GROUP(sb) / 8)) {
+ ext4_unlock_group(sb, block_group);
+ ext4_error(sb, "Corrupt inode bitmap - block_group = %u, "
+ "inode_bitmap = %llu", block_group, blk);
+ grp = ext4_get_group_info(sb, block_group);
+ if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) {
+ int count;
+ count = ext4_free_inodes_count(sb, desc);
+ percpu_counter_sub(&sbi->s_freeinodes_counter,
+ count);
+ }
+ set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state);
+ return -EFSBADCRC;
+ }
+ set_buffer_verified(bh);
+ ext4_unlock_group(sb, block_group);
+ return 0;
+}
+
/*
* Read the inode allocation bitmap for a given block_group, reading
* into the specified slot in the superblock's bitmap cache.
struct ext4_group_desc *desc;
struct buffer_head *bh = NULL;
ext4_fsblk_t bitmap_blk;
- struct ext4_group_info *grp;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
+ int err;
desc = ext4_get_group_desc(sb, block_group, NULL);
if (!desc)
- return NULL;
+ return ERR_PTR(-EFSCORRUPTED);
bitmap_blk = ext4_inode_bitmap(sb, desc);
bh = sb_getblk(sb, bitmap_blk);
ext4_error(sb, "Cannot read inode bitmap - "
"block_group = %u, inode_bitmap = %llu",
block_group, bitmap_blk);
- return NULL;
+ return ERR_PTR(-EIO);
}
if (bitmap_uptodate(bh))
goto verify;
ext4_lock_group(sb, block_group);
if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
- ext4_init_inode_bitmap(sb, bh, block_group, desc);
+ err = ext4_init_inode_bitmap(sb, bh, block_group, desc);
set_bitmap_uptodate(bh);
set_buffer_uptodate(bh);
set_buffer_verified(bh);
ext4_unlock_group(sb, block_group);
unlock_buffer(bh);
+ if (err)
+ goto out;
return bh;
}
ext4_unlock_group(sb, block_group);
ext4_error(sb, "Cannot read inode bitmap - "
"block_group = %u, inode_bitmap = %llu",
block_group, bitmap_blk);
- return NULL;
+ return ERR_PTR(-EIO);
}
verify:
- ext4_lock_group(sb, block_group);
- if (!buffer_verified(bh) &&
- !ext4_inode_bitmap_csum_verify(sb, block_group, desc, bh,
- EXT4_INODES_PER_GROUP(sb) / 8)) {
- ext4_unlock_group(sb, block_group);
- put_bh(bh);
- ext4_error(sb, "Corrupt inode bitmap - block_group = %u, "
- "inode_bitmap = %llu", block_group, bitmap_blk);
- grp = ext4_get_group_info(sb, block_group);
- if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) {
- int count;
- count = ext4_free_inodes_count(sb, desc);
- percpu_counter_sub(&sbi->s_freeinodes_counter,
- count);
- }
- set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state);
- return NULL;
- }
- ext4_unlock_group(sb, block_group);
- set_buffer_verified(bh);
+ err = ext4_validate_inode_bitmap(sb, desc, block_group, bh);
+ if (err)
+ goto out;
return bh;
+out:
+ put_bh(bh);
+ return ERR_PTR(err);
}
/*
bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
/* Don't bother if the inode bitmap is corrupt. */
grp = ext4_get_group_info(sb, block_group);
- if (unlikely(EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) || !bitmap_bh)
+ if (IS_ERR(bitmap_bh)) {
+ fatal = PTR_ERR(bitmap_bh);
+ bitmap_bh = NULL;
+ goto error_return;
+ }
+ if (unlikely(EXT4_MB_GRP_IBITMAP_CORRUPT(grp))) {
+ fatal = -EFSCORRUPTED;
goto error_return;
+ }
BUFFER_TRACE(bitmap_bh, "get_write_access");
fatal = ext4_journal_get_write_access(handle, bitmap_bh);
brelse(inode_bitmap_bh);
inode_bitmap_bh = ext4_read_inode_bitmap(sb, group);
/* Skip groups with suspicious inode tables */
- if (EXT4_MB_GRP_IBITMAP_CORRUPT(grp) || !inode_bitmap_bh) {
+ if (EXT4_MB_GRP_IBITMAP_CORRUPT(grp) ||
+ IS_ERR(inode_bitmap_bh)) {
+ inode_bitmap_bh = NULL;
if (++group == ngroups)
group = 0;
continue;
struct buffer_head *block_bitmap_bh;
block_bitmap_bh = ext4_read_block_bitmap(sb, group);
- if (!block_bitmap_bh) {
- err = -EIO;
+ if (IS_ERR(block_bitmap_bh)) {
+ err = PTR_ERR(block_bitmap_bh);
goto out;
}
BUFFER_TRACE(block_bitmap_bh, "get block bitmap access");
ei->i_extra_isize = EXT4_SB(sb)->s_want_extra_isize;
ei->i_inline_off = 0;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_INLINE_DATA))
+ if (ext4_has_feature_inline_data(sb))
ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
ret = inode;
err = dquot_alloc_inode(inode);
if (err)
goto fail_free_drop;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ if (ext4_has_feature_extents(sb)) {
/* set extent flag only for directory, file and normal symlink*/
if (S_ISDIR(mode) || S_ISREG(mode) || S_ISLNK(mode)) {
ext4_set_inode_flag(inode, EXT4_INODE_EXTENTS);
/* Error cases - e2fsck has already cleaned up for us */
if (ino > max_ino) {
ext4_warning(sb, "bad orphan ino %lu! e2fsck was run?", ino);
+ err = -EFSCORRUPTED;
goto error;
}
block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb);
bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
- if (!bitmap_bh) {
- ext4_warning(sb, "inode bitmap error for orphan %lu", ino);
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
+ ext4_warning(sb, "inode bitmap error %ld for orphan %lu",
+ ino, err);
goto error;
}
desc_count += ext4_free_inodes_count(sb, gdp);
brelse(bitmap_bh);
bitmap_bh = ext4_read_inode_bitmap(sb, i);
- if (!bitmap_bh)
+ if (IS_ERR(bitmap_bh)) {
+ bitmap_bh = NULL;
continue;
+ }
x = ext4_count_free(bitmap_bh->b_data,
EXT4_INODES_PER_GROUP(sb) / 8);
/*
* Okay, we need to do block allocation.
*/
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ if (ext4_has_feature_bigalloc(inode->i_sb)) {
EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
"non-extent mapped inodes with bigalloc");
- return -EUCLEAN;
+ return -EFSCORRUPTED;
}
/* Set up for the direct block allocation */
memset((void *)ext4_raw_inode(&is.iloc)->i_block,
0, EXT4_MIN_INLINE_DATA_SIZE);
- if (EXT4_HAS_INCOMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ if (ext4_has_feature_extents(inode->i_sb)) {
if (S_ISDIR(inode->i_mode) ||
S_ISREG(inode->i_mode) || S_ISLNK(inode->i_mode)) {
ext4_set_inode_flag(inode, EXT4_INODE_EXTENTS);
"lblock %lu mapped to illegal pblock "
"(length %d)", (unsigned long) map->m_lblk,
map->m_len);
- return -EIO;
+ return -EFSCORRUPTED;
}
return 0;
}
/* We can handle the block number less than EXT_MAX_BLOCKS */
if (unlikely(map->m_lblk >= EXT_MAX_BLOCKS))
- return -EIO;
+ return -EFSCORRUPTED;
/* Lookup extent status tree firstly */
if (ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
if (unlikely(err))
page_zero_new_buffers(page, from, to);
else if (decrypt)
- err = ext4_decrypt_one(inode, page);
+ err = ext4_decrypt(page);
return err;
}
#endif
return ret ? ret : copied;
}
+/*
+ * This is a private version of page_zero_new_buffers() which doesn't
+ * set the buffer to be dirty, since in data=journalled mode we need
+ * to call ext4_handle_dirty_metadata() instead.
+ */
+static void zero_new_buffers(struct page *page, unsigned from, unsigned to)
+{
+ unsigned int block_start = 0, block_end;
+ struct buffer_head *head, *bh;
+
+ bh = head = page_buffers(page);
+ do {
+ block_end = block_start + bh->b_size;
+ if (buffer_new(bh)) {
+ if (block_end > from && block_start < to) {
+ if (!PageUptodate(page)) {
+ unsigned start, size;
+
+ start = max(from, block_start);
+ size = min(to, block_end) - start;
+
+ zero_user(page, start, size);
+ set_buffer_uptodate(bh);
+ }
+ clear_buffer_new(bh);
+ }
+ }
+ block_start = block_end;
+ bh = bh->b_this_page;
+ } while (bh != head);
+}
+
static int ext4_journalled_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
if (copied < len) {
if (!PageUptodate(page))
copied = 0;
- page_zero_new_buffers(page, from+copied, to);
+ zero_new_buffers(page, from+copied, to);
}
ret = ext4_walk_page_buffers(handle, page_buffers(page), from,
* the page. But we may reach here when we do a journal commit via
* journal_submit_inode_data_buffers() and in that case we must write
* allocated buffers to achieve data=ordered mode guarantees.
+ *
+ * Also, if there is only one buffer per page (the fs block
+ * size == the page size), if one buffer needs block
+ * allocation or needs to modify the extent tree to clear the
+ * unwritten flag, we know that the page can't be written at
+ * all, so we might as well refuse the write immediately.
+ * Unfortunately if the block size != page size, we can't as
+ * easily detect this case using ext4_walk_page_buffers(), but
+ * for the extremely common case, this is an optimization that
+ * skips a useless round trip through ext4_bio_write_page().
*/
if (ext4_walk_page_buffers(NULL, page_bufs, 0, len, NULL,
ext4_bh_delay_or_unwritten)) {
redirty_page_for_writepage(wbc, page);
- if (current->flags & PF_MEMALLOC) {
+ if ((current->flags & PF_MEMALLOC) ||
+ (inode->i_sb->s_blocksize == PAGE_CACHE_SIZE)) {
/*
* For memory cleaning there's no point in writing only
* some buffers. So just bail out. Warn if we came here
/* We always reserve for an inode update; the superblock could be there too */
static int ext4_da_write_credits(struct inode *inode, loff_t pos, unsigned len)
{
- if (likely(EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_LARGE_FILE)))
+ if (likely(ext4_has_feature_large_file(inode->i_sb)))
return 1;
if (pos + len <= 0x7fffffffULL)
/* We expect the key to be set. */
BUG_ON(!ext4_has_encryption_key(inode));
BUG_ON(blocksize != PAGE_CACHE_SIZE);
- WARN_ON_ONCE(ext4_decrypt_one(inode, page));
+ WARN_ON_ONCE(ext4_decrypt(page));
}
}
if (ext4_should_journal_data(inode)) {
iloc->bh = NULL;
if (!ext4_valid_inum(sb, inode->i_ino))
- return -EIO;
+ return -EFSCORRUPTED;
iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb);
gdp = ext4_get_group_desc(sb, iloc->block_group, NULL);
struct inode *inode = &(ei->vfs_inode);
struct super_block *sb = inode->i_sb;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) {
+ if (ext4_has_feature_huge_file(sb)) {
/* we are using combined 48 bit field */
i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 |
le32_to_cpu(raw_inode->i_blocks_lo);
EXT4_ERROR_INODE(inode, "bad extra_isize (%u != %u)",
EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize,
EXT4_INODE_SIZE(inode->i_sb));
- ret = -EIO;
+ ret = -EFSCORRUPTED;
goto bad_inode;
}
} else
if (!ext4_inode_csum_verify(inode, raw_inode, ei)) {
EXT4_ERROR_INODE(inode, "checksum invalid");
- ret = -EIO;
+ ret = -EFSBADCRC;
goto bad_inode;
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
+ if (ext4_has_feature_64bit(sb))
ei->i_file_acl |=
((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
inode->i_size = ext4_isize(raw_inode);
!ext4_data_block_valid(EXT4_SB(sb), ei->i_file_acl, 1)) {
EXT4_ERROR_INODE(inode, "bad extended attribute block %llu",
ei->i_file_acl);
- ret = -EIO;
+ ret = -EFSCORRUPTED;
goto bad_inode;
} else if (!ext4_has_inline_data(inode)) {
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
} else if (ino == EXT4_BOOT_LOADER_INO) {
make_bad_inode(inode);
} else {
- ret = -EIO;
+ ret = -EFSCORRUPTED;
EXT4_ERROR_INODE(inode, "bogus i_mode (%o)", inode->i_mode);
goto bad_inode;
}
struct inode *ext4_iget_normal(struct super_block *sb, unsigned long ino)
{
if (ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO)
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
return ext4_iget(sb, ino);
}
ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
return 0;
}
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE))
+ if (!ext4_has_feature_huge_file(sb))
return -EFBIG;
if (i_blocks <= 0xffffffffffffULL) {
need_datasync = 1;
}
if (ei->i_disksize > 0x7fffffffULL) {
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_LARGE_FILE) ||
+ if (!ext4_has_feature_large_file(sb) ||
EXT4_SB(sb)->s_es->s_rev_level ==
cpu_to_le32(EXT4_GOOD_OLD_REV))
set_large_file = 1;
if (err)
goto out_brelse;
ext4_update_dynamic_rev(sb);
- EXT4_SET_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_LARGE_FILE);
+ ext4_set_feature_large_file(sb);
ext4_handle_sync(handle);
err = ext4_handle_dirty_super(handle, sb);
}
inode_bl->i_version = 1;
i_size_write(inode_bl, 0);
inode_bl->i_mode = S_IFREG;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ if (ext4_has_feature_extents(sb)) {
ext4_set_inode_flag(inode_bl, EXT4_INODE_EXTENTS);
ext4_ext_tree_init(handle, inode_bl);
} else
goto group_extend_out;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ if (ext4_has_feature_bigalloc(sb)) {
ext4_msg(sb, KERN_ERR,
"Online resizing not supported with bigalloc");
err = -EOPNOTSUPP;
goto mext_out;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ if (ext4_has_feature_bigalloc(sb)) {
ext4_msg(sb, KERN_ERR,
"Online defrag not supported with bigalloc");
err = -EOPNOTSUPP;
goto group_add_out;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ if (ext4_has_feature_bigalloc(sb)) {
ext4_msg(sb, KERN_ERR,
"Online resizing not supported with bigalloc");
err = -EOPNOTSUPP;
int err = 0, err2 = 0;
ext4_group_t o_group = EXT4_SB(sb)->s_groups_count;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ if (ext4_has_feature_bigalloc(sb)) {
ext4_msg(sb, KERN_ERR,
"Online resizing not (yet) supported with bigalloc");
return -EOPNOTSUPP;
bh[i] = NULL;
continue;
}
- if (!(bh[i] = ext4_read_block_bitmap_nowait(sb, group))) {
- err = -ENOMEM;
+ bh[i] = ext4_read_block_bitmap_nowait(sb, group);
+ if (IS_ERR(bh[i])) {
+ err = PTR_ERR(bh[i]);
+ bh[i] = NULL;
goto out;
}
mb_debug(1, "read bitmap for group %u\n", group);
/* wait for I/O completion */
for (i = 0, group = first_group; i < groups_per_page; i++, group++) {
- if (bh[i] && ext4_wait_block_bitmap(sb, group, bh[i]))
- err = -EIO;
+ int err2;
+
+ if (!bh[i])
+ continue;
+ err2 = ext4_wait_block_bitmap(sb, group, bh[i]);
+ if (!err)
+ err = err2;
}
first_block = page->index * blocks_per_page;
}
-static const struct file_operations ext4_mb_seq_groups_fops = {
+const struct file_operations ext4_seq_mb_groups_fops = {
.owner = THIS_MODULE,
.open = ext4_mb_seq_groups_open,
.read = seq_read,
kmalloc(sb->s_blocksize, GFP_NOFS);
BUG_ON(meta_group_info[i]->bb_bitmap == NULL);
bh = ext4_read_block_bitmap(sb, group);
- BUG_ON(bh == NULL);
+ BUG_ON(IS_ERR_OR_NULL(bh));
memcpy(meta_group_info[i]->bb_bitmap, bh->b_data,
sb->s_blocksize);
put_bh(bh);
if (ret != 0)
goto out_free_locality_groups;
- if (sbi->s_proc)
- proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
- &ext4_mb_seq_groups_fops, sb);
-
return 0;
out_free_locality_groups:
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct kmem_cache *cachep = get_groupinfo_cache(sb->s_blocksize_bits);
- if (sbi->s_proc)
- remove_proc_entry("mb_groups", sbi->s_proc);
-
if (sbi->s_group_info) {
for (i = 0; i < ngroups; i++) {
grinfo = ext4_get_group_info(sb, i);
sb = ac->ac_sb;
sbi = EXT4_SB(sb);
- err = -EIO;
bitmap_bh = ext4_read_block_bitmap(sb, ac->ac_b_ex.fe_group);
- if (!bitmap_bh)
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
goto out_err;
+ }
BUFFER_TRACE(bitmap_bh, "getting write access");
err = ext4_journal_get_write_access(handle, bitmap_bh);
atomic_inc(&pa->pa_count);
return pa;
}
- cur_distance = abs(goal_block - cpa->pa_pstart);
- new_distance = abs(goal_block - pa->pa_pstart);
+ cur_distance = abs64(goal_block - cpa->pa_pstart);
+ new_distance = abs64(goal_block - pa->pa_pstart);
if (cur_distance <= new_distance)
return cpa;
return 0;
bitmap_bh = ext4_read_block_bitmap(sb, group);
- if (bitmap_bh == NULL) {
- ext4_error(sb, "Error reading block bitmap for %u", group);
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
+ ext4_error(sb, "Error %d reading block bitmap for %u",
+ err, group);
return 0;
}
}
bitmap_bh = ext4_read_block_bitmap(sb, group);
- if (bitmap_bh == NULL) {
- ext4_error(sb, "Error reading block bitmap for %u",
- group);
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
+ ext4_error(sb, "Error %d reading block bitmap for %u",
+ err, group);
ext4_mb_unload_buddy(&e4b);
continue;
}
ext4_debug("freeing block %llu\n", block);
trace_ext4_free_blocks(inode, block, count, flags);
- if (flags & EXT4_FREE_BLOCKS_FORGET) {
- struct buffer_head *tbh = bh;
- int i;
-
- BUG_ON(bh && (count > 1));
+ if (bh && (flags & EXT4_FREE_BLOCKS_FORGET)) {
+ BUG_ON(count > 1);
- for (i = 0; i < count; i++) {
- cond_resched();
- if (!bh)
- tbh = sb_find_get_block(inode->i_sb,
- block + i);
- if (!tbh)
- continue;
- ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
- inode, tbh, block + i);
- }
+ ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
+ inode, bh, block);
}
/*
count += sbi->s_cluster_ratio - overflow;
}
+ if (!bh && (flags & EXT4_FREE_BLOCKS_FORGET)) {
+ int i;
+
+ for (i = 0; i < count; i++) {
+ cond_resched();
+ bh = sb_find_get_block(inode->i_sb, block + i);
+ if (!bh)
+ continue;
+ ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
+ inode, bh, block + i);
+ }
+ }
+
do_more:
overflow = 0;
ext4_get_group_no_and_offset(sb, block, &block_group, &bit);
}
count_clusters = EXT4_NUM_B2C(sbi, count);
bitmap_bh = ext4_read_block_bitmap(sb, block_group);
- if (!bitmap_bh) {
- err = -EIO;
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
goto error_return;
}
gdp = ext4_get_group_desc(sb, block_group, &gd_bh);
}
bitmap_bh = ext4_read_block_bitmap(sb, block_group);
- if (!bitmap_bh) {
- err = -EIO;
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
goto error_return;
}
* If the filesystem does not support extents, or the inode
* already is extent-based, error out.
*/
- if (!EXT4_HAS_INCOMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_INCOMPAT_EXTENTS) ||
+ if (!ext4_has_feature_extents(inode->i_sb) ||
(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return -EINVAL;
handle_t *handle;
int ret;
- if (!EXT4_HAS_INCOMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_INCOMPAT_EXTENTS) ||
+ if (!ext4_has_feature_extents(inode->i_sb) ||
(!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return -EINVAL;
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC))
+ if (ext4_has_feature_bigalloc(inode->i_sb))
return -EOPNOTSUPP;
/*
}
mmp = (struct mmp_struct *)((*bh)->b_data);
- if (le32_to_cpu(mmp->mmp_magic) == EXT4_MMP_MAGIC &&
- ext4_mmp_csum_verify(sb, mmp))
+ if (le32_to_cpu(mmp->mmp_magic) != EXT4_MMP_MAGIC)
+ ret = -EFSCORRUPTED;
+ else if (!ext4_mmp_csum_verify(sb, mmp))
+ ret = -EFSBADCRC;
+ else
return 0;
- ret = -EINVAL;
warn_exit:
ext4_warning(sb, "Error %d while reading MMP block %llu",
if (!bh) {
ext4_error_inode(inode, func, line, block,
"Directory hole found");
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
dirent = (struct ext4_dir_entry *) bh->b_data;
/* Determine whether or not we have an index block */
if (!is_dx_block && type == INDEX) {
ext4_error_inode(inode, func, line, block,
"directory leaf block found instead of index block");
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
if (!ext4_has_metadata_csum(inode->i_sb) ||
buffer_verified(bh))
ext4_error_inode(inode, func, line, block,
"Directory index failed checksum");
brelse(bh);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSBADCRC);
}
}
if (!is_dx_block) {
ext4_error_inode(inode, func, line, block,
"Directory block failed checksum");
brelse(bh);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSBADCRC);
}
}
return bh;
brelse(bh);
if (!ext4_valid_inum(dir->i_sb, ino)) {
EXT4_ERROR_INODE(dir, "bad inode number: %u", ino);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
if (unlikely(ino == dir->i_ino)) {
EXT4_ERROR_INODE(dir, "'%pd' linked to parent dir",
dentry);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
inode = ext4_iget_normal(dir->i_sb, ino);
if (inode == ERR_PTR(-ESTALE)) {
EXT4_ERROR_INODE(dir,
"deleted inode referenced: %u",
ino);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
if (!IS_ERR(inode) && ext4_encrypted_inode(dir) &&
(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
if (!ext4_valid_inum(d_inode(child)->i_sb, ino)) {
EXT4_ERROR_INODE(d_inode(child),
"bad parent inode number: %u", ino);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EFSCORRUPTED);
}
return d_obtain_alias(ext4_iget_normal(d_inode(child)->i_sb, ino));
while ((char *) de <= top) {
if (ext4_check_dir_entry(dir, NULL, de, bh,
buf, buf_size, offset)) {
- res = -EIO;
+ res = -EFSCORRUPTED;
goto return_result;
}
/* Provide crypto context and crypto buffer to ext4 match */
if ((char *) de >= (((char *) root) + blocksize)) {
EXT4_ERROR_INODE(dir, "invalid rec_len for '..'");
brelse(bh);
- return -EIO;
+ return -EFSCORRUPTED;
}
len = ((char *) root) + (blocksize - csum_size) - (char *) de;
goto out;
if (blocks == 1 && !dx_fallback &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) {
+ ext4_has_feature_dir_index(sb)) {
retval = make_indexed_dir(handle, &fname, dentry,
inode, bh);
bh = NULL; /* make_indexed_dir releases bh */
while (i < buf_size - csum_size) {
if (ext4_check_dir_entry(dir, NULL, de, bh,
bh->b_data, bh->b_size, i))
- return -EIO;
+ return -EFSCORRUPTED;
if (de == de_del) {
if (pde)
pde->rec_len = ext4_rec_len_to_disk(
/* limit is 16-bit i_links_count */
if (inode->i_nlink >= EXT4_LINK_MAX || inode->i_nlink == 2) {
set_nlink(inode, 1);
- EXT4_SET_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_DIR_NLINK);
+ ext4_set_feature_dir_nlink(inode->i_sb);
}
}
}
inode = d_inode(dentry);
- retval = -EIO;
+ retval = -EFSCORRUPTED;
if (le32_to_cpu(de->inode) != inode->i_ino)
goto end_rmdir;
inode = d_inode(dentry);
- retval = -EIO;
+ retval = -EFSCORRUPTED;
if (le32_to_cpu(de->inode) != inode->i_ino)
goto end_unlink;
if (!ent->dir_bh)
return retval;
if (le32_to_cpu(ent->parent_de->inode) != ent->dir->i_ino)
- return -EIO;
+ return -EFSCORRUPTED;
BUFFER_TRACE(ent->dir_bh, "get_write_access");
return ext4_journal_get_write_access(handle, ent->dir_bh);
}
if (retval)
return retval;
ent->de->inode = cpu_to_le32(ino);
- if (EXT4_HAS_INCOMPAT_FEATURE(ent->dir->i_sb,
- EXT4_FEATURE_INCOMPAT_FILETYPE))
+ if (ext4_has_feature_filetype(ent->dir->i_sb))
ent->de->file_type = file_type;
ent->dir->i_version++;
ent->dir->i_ctime = ent->dir->i_mtime =
struct buffer_head *bh, *head;
int ret = 0;
int nr_submitted = 0;
+ int nr_to_submit = 0;
blocksize = 1 << inode->i_blkbits;
unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr);
}
set_buffer_async_write(bh);
+ nr_to_submit++;
} while ((bh = bh->b_this_page) != head);
bh = head = page_buffers(page);
- if (ext4_encrypted_inode(inode) && S_ISREG(inode->i_mode)) {
+ if (ext4_encrypted_inode(inode) && S_ISREG(inode->i_mode) &&
+ nr_to_submit) {
data_page = ext4_encrypt(inode, page);
if (IS_ERR(data_page)) {
ret = PTR_ERR(data_page);
bio_for_each_segment_all(bv, bio, i) {
struct page *page = bv->bv_page;
- int ret = ext4_decrypt(ctx, page);
+ int ret = ext4_decrypt(page);
if (ret) {
WARN_ON_ONCE(1);
SetPageError(page);
if (pages) {
page = list_entry(pages->prev, struct page, lru);
list_del(&page->lru);
- if (add_to_page_cache_lru(page, mapping,
- page->index, GFP_KERNEL))
+ if (add_to_page_cache_lru(page, mapping, page->index,
+ GFP_KERNEL & mapping_gfp_mask(mapping)))
goto next_page;
}
group_data[0].group != sbi->s_groups_count);
reserved_gdb = le16_to_cpu(es->s_reserved_gdt_blocks);
- meta_bg = EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG);
+ meta_bg = ext4_has_feature_meta_bg(sb);
/* This transaction may be extended/restarted along the way */
handle = ext4_journal_start_sb(sb, EXT4_HT_RESIZE, EXT4_MAX_TRANS_DATA);
int mult = 3;
unsigned ret;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER)) {
+ if (!ext4_has_feature_sparse_super(sb)) {
ret = *min;
*min += 1;
return ret;
* do not copy the full number of backups at this time. The resize
* which changed s_groups_count will backup again.
*/
-static void update_backups(struct super_block *sb, int blk_off, char *data,
+static void update_backups(struct super_block *sb, sector_t blk_off, char *data,
int size, int meta_bg)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
group = ext4_list_backups(sb, &three, &five, &seven);
last = sbi->s_groups_count;
} else {
- group = ext4_meta_bg_first_group(sb, group) + 1;
+ group = ext4_get_group_number(sb, blk_off) + 1;
last = (ext4_group_t)(group + EXT4_DESC_PER_BLOCK(sb) - 2);
}
int i, gdb_off, gdb_num, err = 0;
int meta_bg;
- meta_bg = EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG);
+ meta_bg = ext4_has_feature_meta_bg(sb);
for (i = 0; i < count; i++, group++) {
int reserved_gdb = ext4_bg_has_super(sb, group) ?
le16_to_cpu(es->s_reserved_gdt_blocks) : 0;
ext4_debug("free blocks count %llu",
percpu_counter_read(&sbi->s_freeclusters_counter));
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_FLEX_BG) &&
- sbi->s_log_groups_per_flex) {
+ if (ext4_has_feature_flex_bg(sb) && sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, group_data[0].group);
atomic64_add(EXT4_NUM_B2C(sbi, free_blocks),
int gdb_num = group / EXT4_DESC_PER_BLOCK(sb);
int gdb_num_end = ((group + flex_gd->count - 1) /
EXT4_DESC_PER_BLOCK(sb));
- int meta_bg = EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_META_BG);
+ int meta_bg = ext4_has_feature_meta_bg(sb);
sector_t old_gdb = 0;
update_backups(sb, sbi->s_sbh->b_blocknr, (char *)es,
gdb_off = input->group % EXT4_DESC_PER_BLOCK(sb);
- if (gdb_off == 0 && !EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER)) {
+ if (gdb_off == 0 && !ext4_has_feature_sparse_super(sb)) {
ext4_warning(sb, "Can't resize non-sparse filesystem further");
return -EPERM;
}
}
if (reserved_gdb || gdb_off == 0) {
- if (!EXT4_HAS_COMPAT_FEATURE(sb,
- EXT4_FEATURE_COMPAT_RESIZE_INODE)
- || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
+ if (ext4_has_feature_resize_inode(sb) ||
+ !le16_to_cpu(es->s_reserved_gdt_blocks)) {
ext4_warning(sb,
"No reserved GDT blocks, can't resize");
return -EPERM;
if (err)
goto errout;
- EXT4_CLEAR_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_RESIZE_INODE);
- EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG);
+ ext4_clear_feature_resize_inode(sb);
+ ext4_set_feature_meta_bg(sb);
sbi->s_es->s_first_meta_bg =
cpu_to_le32(num_desc_blocks(sb, sbi->s_groups_count));
n_desc_blocks = num_desc_blocks(sb, n_group + 1);
o_desc_blocks = num_desc_blocks(sb, sbi->s_groups_count);
- meta_bg = EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG);
+ meta_bg = ext4_has_feature_meta_bg(sb);
- if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_RESIZE_INODE)) {
+ if (ext4_has_feature_resize_inode(sb)) {
if (meta_bg) {
ext4_error(sb, "resize_inode and meta_bg enabled "
"simultaneously");
#include <linux/namei.h>
#include <linux/quotaops.h>
#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/log2.h>
#include <linux/crc16.h>
#define CREATE_TRACE_POINTS
#include <trace/events/ext4.h>
-static struct proc_dir_entry *ext4_proc_root;
-static struct kset *ext4_kset;
static struct ext4_lazy_init *ext4_li_info;
static struct mutex ext4_li_mtx;
-static struct ext4_features *ext4_feat;
static int ext4_mballoc_ready;
static struct ratelimit_state ext4_mount_msg_ratelimit;
static void ext4_destroy_lazyinit_thread(void);
static void ext4_unregister_li_request(struct super_block *sb);
static void ext4_clear_request_list(void);
-static int ext4_reserve_clusters(struct ext4_sb_info *, ext4_fsblk_t);
#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT2)
static struct file_system_type ext2_fs_type = {
static int ext4_verify_csum_type(struct super_block *sb,
struct ext4_super_block *es)
{
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_feature_metadata_csum(sb))
return 1;
return es->s_checksum_type == EXT4_CRC32C_CHKSUM;
smp_wmb();
sb->s_flags |= MS_RDONLY;
}
- if (test_opt(sb, ERRORS_PANIC))
+ if (test_opt(sb, ERRORS_PANIC)) {
+ if (EXT4_SB(sb)->s_journal &&
+ !(EXT4_SB(sb)->s_journal->j_flags & JBD2_REC_ERR))
+ return;
panic("EXT4-fs (device %s): panic forced after error\n",
sb->s_id);
+ }
}
#define ext4_error_ratelimit(sb) \
char *errstr = NULL;
switch (errno) {
+ case -EFSCORRUPTED:
+ errstr = "Corrupt filesystem";
+ break;
+ case -EFSBADCRC:
+ errstr = "Filesystem failed CRC";
+ break;
case -EIO:
errstr = "IO failure";
break;
jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
save_error_info(sb, function, line);
}
- if (test_opt(sb, ERRORS_PANIC))
+ if (test_opt(sb, ERRORS_PANIC)) {
+ if (EXT4_SB(sb)->s_journal &&
+ !(EXT4_SB(sb)->s_journal->j_flags & JBD2_REC_ERR))
+ return;
panic("EXT4-fs panic from previous error\n");
+ }
}
void __ext4_msg(struct super_block *sb,
ext4_abort(sb, "Couldn't clean up the journal");
}
+ ext4_unregister_sysfs(sb);
ext4_es_unregister_shrinker(sbi);
del_timer_sync(&sbi->s_err_report);
ext4_release_system_zone(sb);
ext4_xattr_put_super(sb);
if (!(sb->s_flags & MS_RDONLY)) {
- EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+ ext4_clear_feature_journal_needs_recovery(sb);
es->s_state = cpu_to_le16(sbi->s_mount_state);
}
if (!(sb->s_flags & MS_RDONLY))
ext4_commit_super(sb, 1);
- if (sbi->s_proc) {
- remove_proc_entry("options", sbi->s_proc);
- remove_proc_entry(sb->s_id, ext4_proc_root);
- }
- kobject_del(&sbi->s_kobj);
-
for (i = 0; i < sbi->s_gdb_count; i++)
brelse(sbi->s_group_desc[i]);
kvfree(sbi->s_group_desc);
"quota options when quota turned on");
return -1;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA)) {
+ if (ext4_has_feature_quota(sb)) {
ext4_msg(sb, KERN_ERR, "Cannot set journaled quota options "
"when QUOTA feature is enabled");
return -1;
{Opt_nojournal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,
MOPT_EXT4_ONLY | MOPT_CLEAR},
{Opt_journal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,
- MOPT_EXT4_ONLY | MOPT_SET},
+ MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
{Opt_journal_async_commit, (EXT4_MOUNT_JOURNAL_ASYNC_COMMIT |
EXT4_MOUNT_JOURNAL_CHECKSUM),
- MOPT_EXT4_ONLY | MOPT_SET},
+ MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
{Opt_noload, EXT4_MOUNT_NOLOAD, MOPT_NO_EXT2 | MOPT_SET},
{Opt_err_panic, EXT4_MOUNT_ERRORS_PANIC, MOPT_SET | MOPT_CLEAR_ERR},
{Opt_err_ro, EXT4_MOUNT_ERRORS_RO, MOPT_SET | MOPT_CLEAR_ERR},
return -1;
if (args->from && (m->flags & MOPT_GTE0) && (arg < 0))
return -1;
- if (m->flags & MOPT_EXPLICIT)
- set_opt2(sb, EXPLICIT_DELALLOC);
+ if (m->flags & MOPT_EXPLICIT) {
+ if (m->mount_opt & EXT4_MOUNT_DELALLOC) {
+ set_opt2(sb, EXPLICIT_DELALLOC);
+ } else if (m->mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) {
+ set_opt2(sb, EXPLICIT_JOURNAL_CHECKSUM);
+ } else
+ return -1;
+ }
if (m->flags & MOPT_CLEAR_ERR)
clear_opt(sb, ERRORS_MASK);
if (token == Opt_noquota && sb_any_quota_loaded(sb)) {
"quota options when quota turned on");
return -1;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_QUOTA)) {
+ if (ext4_has_feature_quota(sb)) {
ext4_msg(sb, KERN_ERR,
"Cannot set journaled quota options "
"when QUOTA feature is enabled");
return 0;
}
#ifdef CONFIG_QUOTA
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA) &&
+ if (ext4_has_feature_quota(sb) &&
(test_opt(sb, USRQUOTA) || test_opt(sb, GRPQUOTA))) {
ext4_msg(sb, KERN_ERR, "Cannot set quota options when QUOTA "
"feature is enabled");
return _ext4_show_options(seq, root->d_sb, 0);
}
-static int options_seq_show(struct seq_file *seq, void *offset)
+int ext4_seq_options_show(struct seq_file *seq, void *offset)
{
struct super_block *sb = seq->private;
int rc;
return rc;
}
-static int options_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, options_seq_show, PDE_DATA(inode));
-}
-
-static const struct file_operations ext4_seq_options_fops = {
- .owner = THIS_MODULE,
- .open = options_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
int read_only)
{
es->s_mtime = cpu_to_le32(get_seconds());
ext4_update_dynamic_rev(sb);
if (sbi->s_journal)
- EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+ ext4_set_feature_journal_needs_recovery(sb);
ext4_commit_super(sb, 1);
done:
return 0;
}
-static __le16 ext4_group_desc_csum(struct ext4_sb_info *sbi, __u32 block_group,
+static __le16 ext4_group_desc_csum(struct super_block *sb, __u32 block_group,
struct ext4_group_desc *gdp)
{
int offset;
__u16 crc = 0;
__le32 le_group = cpu_to_le32(block_group);
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
if (ext4_has_metadata_csum(sbi->s_sb)) {
/* Use new metadata_csum algorithm */
}
/* old crc16 code */
- if (!(sbi->s_es->s_feature_ro_compat &
- cpu_to_le32(EXT4_FEATURE_RO_COMPAT_GDT_CSUM)))
+ if (!ext4_has_feature_gdt_csum(sb))
return 0;
offset = offsetof(struct ext4_group_desc, bg_checksum);
crc = crc16(crc, (__u8 *)gdp, offset);
offset += sizeof(gdp->bg_checksum); /* skip checksum */
/* for checksum of struct ext4_group_desc do the rest...*/
- if ((sbi->s_es->s_feature_incompat &
- cpu_to_le32(EXT4_FEATURE_INCOMPAT_64BIT)) &&
+ if (ext4_has_feature_64bit(sb) &&
offset < le16_to_cpu(sbi->s_es->s_desc_size))
crc = crc16(crc, (__u8 *)gdp + offset,
le16_to_cpu(sbi->s_es->s_desc_size) -
struct ext4_group_desc *gdp)
{
if (ext4_has_group_desc_csum(sb) &&
- (gdp->bg_checksum != ext4_group_desc_csum(EXT4_SB(sb),
- block_group, gdp)))
+ (gdp->bg_checksum != ext4_group_desc_csum(sb, block_group, gdp)))
return 0;
return 1;
{
if (!ext4_has_group_desc_csum(sb))
return;
- gdp->bg_checksum = ext4_group_desc_csum(EXT4_SB(sb), block_group, gdp);
+ gdp->bg_checksum = ext4_group_desc_csum(sb, block_group, gdp);
}
/* Called at mount-time, super-block is locked */
int flexbg_flag = 0;
ext4_group_t i, grp = sbi->s_groups_count;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ if (ext4_has_feature_flex_bg(sb))
flexbg_flag = 1;
ext4_debug("Checking group descriptors");
if (!ext4_group_desc_csum_verify(sb, i, gdp)) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Checksum for group %u failed (%u!=%u)",
- i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
+ i, le16_to_cpu(ext4_group_desc_csum(sb, i,
gdp)), le16_to_cpu(gdp->bg_checksum));
if (!(sb->s_flags & MS_RDONLY)) {
ext4_unlock_group(sb, i);
first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
- nr < first_meta_bg)
+ if (!ext4_has_feature_meta_bg(sb) || nr < first_meta_bg)
return logical_sb_block + nr + 1;
bg = sbi->s_desc_per_block * nr;
if (ext4_bg_has_super(sb, bg))
return ret;
}
-/* sysfs supprt */
-
-struct ext4_attr {
- struct attribute attr;
- ssize_t (*show)(struct ext4_attr *, struct ext4_sb_info *, char *);
- ssize_t (*store)(struct ext4_attr *, struct ext4_sb_info *,
- const char *, size_t);
- union {
- int offset;
- int deprecated_val;
- } u;
-};
-
-static int parse_strtoull(const char *buf,
- unsigned long long max, unsigned long long *value)
-{
- int ret;
-
- ret = kstrtoull(skip_spaces(buf), 0, value);
- if (!ret && *value > max)
- ret = -EINVAL;
- return ret;
-}
-
-static ssize_t delayed_allocation_blocks_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi,
- char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (s64) EXT4_C2B(sbi,
- percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
-}
-
-static ssize_t session_write_kbytes_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- struct super_block *sb = sbi->s_buddy_cache->i_sb;
-
- if (!sb->s_bdev->bd_part)
- return snprintf(buf, PAGE_SIZE, "0\n");
- return snprintf(buf, PAGE_SIZE, "%lu\n",
- (part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
- sbi->s_sectors_written_start) >> 1);
-}
-
-static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- struct super_block *sb = sbi->s_buddy_cache->i_sb;
-
- if (!sb->s_bdev->bd_part)
- return snprintf(buf, PAGE_SIZE, "0\n");
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)(sbi->s_kbytes_written +
- ((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
- EXT4_SB(sb)->s_sectors_written_start) >> 1)));
-}
-
-static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
- struct ext4_sb_info *sbi,
- const char *buf, size_t count)
-{
- unsigned long t;
- int ret;
-
- ret = kstrtoul(skip_spaces(buf), 0, &t);
- if (ret)
- return ret;
-
- if (t && (!is_power_of_2(t) || t > 0x40000000))
- return -EINVAL;
-
- sbi->s_inode_readahead_blks = t;
- return count;
-}
-
-static ssize_t sbi_ui_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- unsigned int *ui = (unsigned int *) (((char *) sbi) + a->u.offset);
-
- return snprintf(buf, PAGE_SIZE, "%u\n", *ui);
-}
-
-static ssize_t sbi_ui_store(struct ext4_attr *a,
- struct ext4_sb_info *sbi,
- const char *buf, size_t count)
-{
- unsigned int *ui = (unsigned int *) (((char *) sbi) + a->u.offset);
- unsigned long t;
- int ret;
-
- ret = kstrtoul(skip_spaces(buf), 0, &t);
- if (ret)
- return ret;
- *ui = t;
- return count;
-}
-
-static ssize_t es_ui_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
-
- unsigned int *ui = (unsigned int *) (((char *) sbi->s_es) +
- a->u.offset);
-
- return snprintf(buf, PAGE_SIZE, "%u\n", *ui);
-}
-
-static ssize_t reserved_clusters_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long) atomic64_read(&sbi->s_resv_clusters));
-}
-
-static ssize_t reserved_clusters_store(struct ext4_attr *a,
- struct ext4_sb_info *sbi,
- const char *buf, size_t count)
-{
- unsigned long long val;
- int ret;
-
- if (parse_strtoull(buf, -1ULL, &val))
- return -EINVAL;
- ret = ext4_reserve_clusters(sbi, val);
-
- return ret ? ret : count;
-}
-
-static ssize_t trigger_test_error(struct ext4_attr *a,
- struct ext4_sb_info *sbi,
- const char *buf, size_t count)
-{
- int len = count;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (len && buf[len-1] == '\n')
- len--;
-
- if (len)
- ext4_error(sbi->s_sb, "%.*s", len, buf);
- return count;
-}
-
-static ssize_t sbi_deprecated_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", a->u.deprecated_val);
-}
-
-#define EXT4_ATTR_OFFSET(_name,_mode,_show,_store,_elname) \
-static struct ext4_attr ext4_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .show = _show, \
- .store = _store, \
- .u = { \
- .offset = offsetof(struct ext4_sb_info, _elname),\
- }, \
-}
-
-#define EXT4_ATTR_OFFSET_ES(_name,_mode,_show,_store,_elname) \
-static struct ext4_attr ext4_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .show = _show, \
- .store = _store, \
- .u = { \
- .offset = offsetof(struct ext4_super_block, _elname), \
- }, \
-}
-
-#define EXT4_ATTR(name, mode, show, store) \
-static struct ext4_attr ext4_attr_##name = __ATTR(name, mode, show, store)
-
-#define EXT4_INFO_ATTR(name) EXT4_ATTR(name, 0444, NULL, NULL)
-#define EXT4_RO_ATTR(name) EXT4_ATTR(name, 0444, name##_show, NULL)
-#define EXT4_RW_ATTR(name) EXT4_ATTR(name, 0644, name##_show, name##_store)
-
-#define EXT4_RO_ATTR_ES_UI(name, elname) \
- EXT4_ATTR_OFFSET_ES(name, 0444, es_ui_show, NULL, elname)
-#define EXT4_RW_ATTR_SBI_UI(name, elname) \
- EXT4_ATTR_OFFSET(name, 0644, sbi_ui_show, sbi_ui_store, elname)
-
-#define ATTR_LIST(name) &ext4_attr_##name.attr
-#define EXT4_DEPRECATED_ATTR(_name, _val) \
-static struct ext4_attr ext4_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = 0444 }, \
- .show = sbi_deprecated_show, \
- .u = { \
- .deprecated_val = _val, \
- }, \
-}
-
-EXT4_RO_ATTR(delayed_allocation_blocks);
-EXT4_RO_ATTR(session_write_kbytes);
-EXT4_RO_ATTR(lifetime_write_kbytes);
-EXT4_RW_ATTR(reserved_clusters);
-EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, sbi_ui_show,
- inode_readahead_blks_store, s_inode_readahead_blks);
-EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
-EXT4_RW_ATTR_SBI_UI(mb_stats, s_mb_stats);
-EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan);
-EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
-EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
-EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
-EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
-EXT4_DEPRECATED_ATTR(max_writeback_mb_bump, 128);
-EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
-EXT4_ATTR(trigger_fs_error, 0200, NULL, trigger_test_error);
-EXT4_RW_ATTR_SBI_UI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
-EXT4_RW_ATTR_SBI_UI(err_ratelimit_burst, s_err_ratelimit_state.burst);
-EXT4_RW_ATTR_SBI_UI(warning_ratelimit_interval_ms, s_warning_ratelimit_state.interval);
-EXT4_RW_ATTR_SBI_UI(warning_ratelimit_burst, s_warning_ratelimit_state.burst);
-EXT4_RW_ATTR_SBI_UI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval);
-EXT4_RW_ATTR_SBI_UI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);
-EXT4_RO_ATTR_ES_UI(errors_count, s_error_count);
-EXT4_RO_ATTR_ES_UI(first_error_time, s_first_error_time);
-EXT4_RO_ATTR_ES_UI(last_error_time, s_last_error_time);
-
-static struct attribute *ext4_attrs[] = {
- ATTR_LIST(delayed_allocation_blocks),
- ATTR_LIST(session_write_kbytes),
- ATTR_LIST(lifetime_write_kbytes),
- ATTR_LIST(reserved_clusters),
- ATTR_LIST(inode_readahead_blks),
- ATTR_LIST(inode_goal),
- ATTR_LIST(mb_stats),
- ATTR_LIST(mb_max_to_scan),
- ATTR_LIST(mb_min_to_scan),
- ATTR_LIST(mb_order2_req),
- ATTR_LIST(mb_stream_req),
- ATTR_LIST(mb_group_prealloc),
- ATTR_LIST(max_writeback_mb_bump),
- ATTR_LIST(extent_max_zeroout_kb),
- ATTR_LIST(trigger_fs_error),
- ATTR_LIST(err_ratelimit_interval_ms),
- ATTR_LIST(err_ratelimit_burst),
- ATTR_LIST(warning_ratelimit_interval_ms),
- ATTR_LIST(warning_ratelimit_burst),
- ATTR_LIST(msg_ratelimit_interval_ms),
- ATTR_LIST(msg_ratelimit_burst),
- ATTR_LIST(errors_count),
- ATTR_LIST(first_error_time),
- ATTR_LIST(last_error_time),
- NULL,
-};
-
-/* Features this copy of ext4 supports */
-EXT4_INFO_ATTR(lazy_itable_init);
-EXT4_INFO_ATTR(batched_discard);
-EXT4_INFO_ATTR(meta_bg_resize);
-EXT4_INFO_ATTR(encryption);
-
-static struct attribute *ext4_feat_attrs[] = {
- ATTR_LIST(lazy_itable_init),
- ATTR_LIST(batched_discard),
- ATTR_LIST(meta_bg_resize),
- ATTR_LIST(encryption),
- NULL,
-};
-
-static ssize_t ext4_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
- s_kobj);
- struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
-
- return a->show ? a->show(a, sbi, buf) : 0;
-}
-
-static ssize_t ext4_attr_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buf, size_t len)
-{
- struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
- s_kobj);
- struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
-
- return a->store ? a->store(a, sbi, buf, len) : 0;
-}
-
-static void ext4_sb_release(struct kobject *kobj)
-{
- struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
- s_kobj);
- complete(&sbi->s_kobj_unregister);
-}
-
-static const struct sysfs_ops ext4_attr_ops = {
- .show = ext4_attr_show,
- .store = ext4_attr_store,
-};
-
-static struct kobj_type ext4_ktype = {
- .default_attrs = ext4_attrs,
- .sysfs_ops = &ext4_attr_ops,
- .release = ext4_sb_release,
-};
-
-static void ext4_feat_release(struct kobject *kobj)
-{
- complete(&ext4_feat->f_kobj_unregister);
-}
-
-static ssize_t ext4_feat_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "supported\n");
-}
-
-/*
- * We can not use ext4_attr_show/store because it relies on the kobject
- * being embedded in the ext4_sb_info structure which is definitely not
- * true in this case.
- */
-static const struct sysfs_ops ext4_feat_ops = {
- .show = ext4_feat_show,
- .store = NULL,
-};
-
-static struct kobj_type ext4_feat_ktype = {
- .default_attrs = ext4_feat_attrs,
- .sysfs_ops = &ext4_feat_ops,
- .release = ext4_feat_release,
-};
-
/*
* Check whether this filesystem can be mounted based on
* the features present and the RDONLY/RDWR mount requested.
*/
static int ext4_feature_set_ok(struct super_block *sb, int readonly)
{
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, ~EXT4_FEATURE_INCOMPAT_SUPP)) {
+ if (ext4_has_unknown_ext4_incompat_features(sb)) {
ext4_msg(sb, KERN_ERR,
"Couldn't mount because of "
"unsupported optional features (%x)",
if (readonly)
return 1;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_READONLY)) {
+ if (ext4_has_feature_readonly(sb)) {
ext4_msg(sb, KERN_INFO, "filesystem is read-only");
sb->s_flags |= MS_RDONLY;
return 1;
}
/* Check that feature set is OK for a read-write mount */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, ~EXT4_FEATURE_RO_COMPAT_SUPP)) {
+ if (ext4_has_unknown_ext4_ro_compat_features(sb)) {
ext4_msg(sb, KERN_ERR, "couldn't mount RDWR because of "
"unsupported optional features (%x)",
(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_ro_compat) &
* Large file size enabled file system can only be mounted
* read-write on 32-bit systems if kernel is built with CONFIG_LBDAF
*/
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) {
+ if (ext4_has_feature_huge_file(sb)) {
if (sizeof(blkcnt_t) < sizeof(u64)) {
ext4_msg(sb, KERN_ERR, "Filesystem with huge files "
"cannot be mounted RDWR without "
return 0;
}
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC) &&
- !EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ if (ext4_has_feature_bigalloc(sb) && !ext4_has_feature_extents(sb)) {
ext4_msg(sb, KERN_ERR,
"Can't support bigalloc feature without "
"extents feature\n");
}
#ifndef CONFIG_QUOTA
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA) &&
- !readonly) {
+ if (ext4_has_feature_quota(sb) && !readonly) {
ext4_msg(sb, KERN_ERR,
"Filesystem with quota feature cannot be mounted RDWR "
"without CONFIG_QUOTA");
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
int s, j, count = 0;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC))
+ if (!ext4_has_feature_bigalloc(sb))
return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) +
sbi->s_itb_per_group + 2);
return 0;
}
-
-static ext4_fsblk_t ext4_calculate_resv_clusters(struct super_block *sb)
+static void ext4_set_resv_clusters(struct super_block *sb)
{
ext4_fsblk_t resv_clusters;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
/*
* There's no need to reserve anything when we aren't using extents.
* hole punching doesn't need new metadata... This is needed especially
* to keep ext2/3 backward compatibility.
*/
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS))
- return 0;
+ if (!ext4_has_feature_extents(sb))
+ return;
/*
* By default we reserve 2% or 4096 clusters, whichever is smaller.
* This should cover the situations where we can not afford to run
* allocation would require 1, or 2 blocks, higher numbers are
* very rare.
*/
- resv_clusters = ext4_blocks_count(EXT4_SB(sb)->s_es) >>
- EXT4_SB(sb)->s_cluster_bits;
+ resv_clusters = (ext4_blocks_count(sbi->s_es) >>
+ sbi->s_cluster_bits);
do_div(resv_clusters, 50);
resv_clusters = min_t(ext4_fsblk_t, resv_clusters, 4096);
- return resv_clusters;
-}
-
-
-static int ext4_reserve_clusters(struct ext4_sb_info *sbi, ext4_fsblk_t count)
-{
- ext4_fsblk_t clusters = ext4_blocks_count(sbi->s_es) >>
- sbi->s_cluster_bits;
-
- if (count >= clusters)
- return -EINVAL;
-
- atomic64_set(&sbi->s_resv_clusters, count);
- return 0;
+ atomic64_set(&sbi->s_resv_clusters, resv_clusters);
}
static int ext4_fill_super(struct super_block *sb, void *data, int silent)
sbi->s_kbytes_written = le64_to_cpu(es->s_kbytes_written);
/* Warn if metadata_csum and gdt_csum are both set. */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
- EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM))
+ if (ext4_has_feature_metadata_csum(sb) &&
+ ext4_has_feature_gdt_csum(sb))
ext4_warning(sb, "metadata_csum and uninit_bg are "
"redundant flags; please run fsck.");
}
/* Load the checksum driver */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
+ if (ext4_has_feature_metadata_csum(sb)) {
sbi->s_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
if (IS_ERR(sbi->s_chksum_driver)) {
ext4_msg(sb, KERN_ERR, "Cannot load crc32c driver.");
ext4_msg(sb, KERN_ERR, "VFS: Found ext4 filesystem with "
"invalid superblock checksum. Run e2fsck?");
silent = 1;
+ ret = -EFSBADCRC;
goto cantfind_ext4;
}
/* Precompute checksum seed for all metadata */
- if (ext4_has_metadata_csum(sb))
+ if (ext4_has_feature_csum_seed(sb))
+ sbi->s_csum_seed = le32_to_cpu(es->s_checksum_seed);
+ else if (ext4_has_metadata_csum(sb))
sbi->s_csum_seed = ext4_chksum(sbi, ~0, es->s_uuid,
sizeof(es->s_uuid));
(test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV &&
- (EXT4_HAS_COMPAT_FEATURE(sb, ~0U) ||
- EXT4_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
- EXT4_HAS_INCOMPAT_FEATURE(sb, ~0U)))
+ (ext4_has_compat_features(sb) ||
+ ext4_has_ro_compat_features(sb) ||
+ ext4_has_incompat_features(sb)))
ext4_msg(sb, KERN_WARNING,
"feature flags set on rev 0 fs, "
"running e2fsck is recommended");
if (es->s_creator_os == cpu_to_le32(EXT4_OS_HURD)) {
set_opt2(sb, HURD_COMPAT);
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_64BIT)) {
+ if (ext4_has_feature_64bit(sb)) {
ext4_msg(sb, KERN_ERR,
"The Hurd can't support 64-bit file systems");
goto failed_mount;
}
}
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_ENCRYPT) &&
- es->s_encryption_level) {
+ if (ext4_has_feature_encrypt(sb) && es->s_encryption_level) {
ext4_msg(sb, KERN_ERR, "Unsupported encryption level %d",
es->s_encryption_level);
goto failed_mount;
}
}
- has_huge_files = EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE);
+ has_huge_files = ext4_has_feature_huge_file(sb);
sbi->s_bitmap_maxbytes = ext4_max_bitmap_size(sb->s_blocksize_bits,
has_huge_files);
sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits, has_huge_files);
}
sbi->s_desc_size = le16_to_cpu(es->s_desc_size);
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) {
+ if (ext4_has_feature_64bit(sb)) {
if (sbi->s_desc_size < EXT4_MIN_DESC_SIZE_64BIT ||
sbi->s_desc_size > EXT4_MAX_DESC_SIZE ||
!is_power_of_2(sbi->s_desc_size)) {
for (i = 0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
- if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) {
+ if (ext4_has_feature_dir_index(sb)) {
i = le32_to_cpu(es->s_flags);
if (i & EXT2_FLAGS_UNSIGNED_HASH)
sbi->s_hash_unsigned = 3;
/* Handle clustersize */
clustersize = BLOCK_SIZE << le32_to_cpu(es->s_log_cluster_size);
- has_bigalloc = EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC);
+ has_bigalloc = ext4_has_feature_bigalloc(sb);
if (has_bigalloc) {
if (clustersize < blocksize) {
ext4_msg(sb, KERN_ERR,
goto failed_mount;
}
- if (ext4_proc_root)
- sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
-
- if (sbi->s_proc)
- proc_create_data("options", S_IRUGO, sbi->s_proc,
- &ext4_seq_options_fops, sb);
-
bgl_lock_init(sbi->s_blockgroup_lock);
for (i = 0; i < db_count; i++) {
}
if (!ext4_check_descriptors(sb, &first_not_zeroed)) {
ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
+ ret = -EFSCORRUPTED;
goto failed_mount2;
}
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_QUOTA
sb->dq_op = &ext4_quota_operations;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA))
+ if (ext4_has_feature_quota(sb))
sb->s_qcop = &dquot_quotactl_sysfile_ops;
else
sb->s_qcop = &ext4_qctl_operations;
sb->s_root = NULL;
needs_recovery = (es->s_last_orphan != 0 ||
- EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_RECOVER));
+ ext4_has_feature_journal_needs_recovery(sb));
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_MMP) &&
- !(sb->s_flags & MS_RDONLY))
+ if (ext4_has_feature_mmp(sb) && !(sb->s_flags & MS_RDONLY))
if (ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block)))
goto failed_mount3a;
* The first inode we look at is the journal inode. Don't try
* root first: it may be modified in the journal!
*/
- if (!test_opt(sb, NOLOAD) &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
+ if (!test_opt(sb, NOLOAD) && ext4_has_feature_journal(sb)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3a;
} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
- EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
+ ext4_has_feature_journal_needs_recovery(sb)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
"suppressed and not mounted read-only");
goto failed_mount_wq;
} else {
+ /* Nojournal mode, all journal mount options are illegal */
+ if (test_opt2(sb, EXPLICIT_JOURNAL_CHECKSUM)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "journal_checksum, fs mounted w/o journal");
+ goto failed_mount_wq;
+ }
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "journal_async_commit, fs mounted w/o journal");
+ goto failed_mount_wq;
+ }
+ if (sbi->s_commit_interval != JBD2_DEFAULT_MAX_COMMIT_AGE*HZ) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "commit=%lu, fs mounted w/o journal",
+ sbi->s_commit_interval / HZ);
+ goto failed_mount_wq;
+ }
+ if (EXT4_MOUNT_DATA_FLAGS &
+ (sbi->s_mount_opt ^ sbi->s_def_mount_opt)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "data=, fs mounted w/o journal");
+ goto failed_mount_wq;
+ }
+ sbi->s_def_mount_opt &= EXT4_MOUNT_JOURNAL_CHECKSUM;
+ clear_opt(sb, JOURNAL_CHECKSUM);
clear_opt(sb, DATA_FLAGS);
sbi->s_journal = NULL;
needs_recovery = 0;
goto no_journal;
}
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT) &&
+ if (ext4_has_feature_64bit(sb) &&
!jbd2_journal_set_features(EXT4_SB(sb)->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_64BIT)) {
ext4_msg(sb, KERN_ERR, "Failed to set 64-bit journal feature");
}
}
- if ((DUMMY_ENCRYPTION_ENABLED(sbi) ||
- EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_ENCRYPT)) &&
+ if ((DUMMY_ENCRYPTION_ENABLED(sbi) || ext4_has_feature_encrypt(sb)) &&
(blocksize != PAGE_CACHE_SIZE)) {
ext4_msg(sb, KERN_ERR,
"Unsupported blocksize for fs encryption");
goto failed_mount_wq;
}
- if (DUMMY_ENCRYPTION_ENABLED(sbi) &&
- !(sb->s_flags & MS_RDONLY) &&
- !EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_ENCRYPT)) {
- EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_ENCRYPT);
+ if (DUMMY_ENCRYPTION_ENABLED(sbi) && !(sb->s_flags & MS_RDONLY) &&
+ !ext4_has_feature_encrypt(sb)) {
+ ext4_set_feature_encrypt(sb);
ext4_commit_super(sb, 1);
}
if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) {
sbi->s_want_extra_isize = sizeof(struct ext4_inode) -
EXT4_GOOD_OLD_INODE_SIZE;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE)) {
+ if (ext4_has_feature_extra_isize(sb)) {
if (sbi->s_want_extra_isize <
le16_to_cpu(es->s_want_extra_isize))
sbi->s_want_extra_isize =
"available");
}
- err = ext4_reserve_clusters(sbi, ext4_calculate_resv_clusters(sb));
- if (err) {
- ext4_msg(sb, KERN_ERR, "failed to reserve %llu clusters for "
- "reserved pool", ext4_calculate_resv_clusters(sb));
- goto failed_mount4a;
- }
+ ext4_set_resv_clusters(sb);
err = ext4_setup_system_zone(sb);
if (err) {
goto failed_mount6;
}
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ if (ext4_has_feature_flex_bg(sb))
if (!ext4_fill_flex_info(sb)) {
ext4_msg(sb, KERN_ERR,
"unable to initialize "
if (err)
goto failed_mount6;
- sbi->s_kobj.kset = ext4_kset;
- init_completion(&sbi->s_kobj_unregister);
- err = kobject_init_and_add(&sbi->s_kobj, &ext4_ktype, NULL,
- "%s", sb->s_id);
+ err = ext4_register_sysfs(sb);
if (err)
goto failed_mount7;
#ifdef CONFIG_QUOTA
/* Enable quota usage during mount. */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA) &&
- !(sb->s_flags & MS_RDONLY)) {
+ if (ext4_has_feature_quota(sb) && !(sb->s_flags & MS_RDONLY)) {
err = ext4_enable_quotas(sb);
if (err)
goto failed_mount8;
#ifdef CONFIG_QUOTA
failed_mount8:
- kobject_del(&sbi->s_kobj);
+ ext4_unregister_sysfs(sb);
#endif
failed_mount7:
ext4_unregister_li_request(sb);
failed_mount:
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
- if (sbi->s_proc) {
- remove_proc_entry("options", sbi->s_proc);
- remove_proc_entry(sb->s_id, ext4_proc_root);
- }
#ifdef CONFIG_QUOTA
for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
struct inode *journal_inode;
journal_t *journal;
- BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
+ BUG_ON(!ext4_has_feature_journal(sb));
/* First, test for the existence of a valid inode on disk. Bad
* things happen if we iget() an unused inode, as the subsequent
struct ext4_super_block *es;
struct block_device *bdev;
- BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
+ BUG_ON(!ext4_has_feature_journal(sb));
bdev = ext4_blkdev_get(j_dev, sb);
if (bdev == NULL)
int err = 0;
int really_read_only;
- BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
+ BUG_ON(!ext4_has_feature_journal(sb));
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
* crash? For recovery, we need to check in advance whether we
* can get read-write access to the device.
*/
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
+ if (ext4_has_feature_journal_needs_recovery(sb)) {
if (sb->s_flags & MS_RDONLY) {
ext4_msg(sb, KERN_INFO, "INFO: recovery "
"required on readonly filesystem");
if (!(journal->j_flags & JBD2_BARRIER))
ext4_msg(sb, KERN_INFO, "barriers disabled");
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER))
+ if (!ext4_has_feature_journal_needs_recovery(sb))
err = jbd2_journal_wipe(journal, !really_read_only);
if (!err) {
char *save = kmalloc(EXT4_S_ERR_LEN, GFP_KERNEL);
{
journal_t *journal = EXT4_SB(sb)->s_journal;
- if (!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
+ if (!ext4_has_feature_journal(sb)) {
BUG_ON(journal != NULL);
return;
}
if (jbd2_journal_flush(journal) < 0)
goto out;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER) &&
+ if (ext4_has_feature_journal_needs_recovery(sb) &&
sb->s_flags & MS_RDONLY) {
- EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+ ext4_clear_feature_journal_needs_recovery(sb);
ext4_commit_super(sb, 1);
}
int j_errno;
const char *errstr;
- BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
+ BUG_ON(!ext4_has_feature_journal(sb));
journal = EXT4_SB(sb)->s_journal;
goto out;
/* Journal blocked and flushed, clear needs_recovery flag. */
- EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+ ext4_clear_feature_journal_needs_recovery(sb);
}
error = ext4_commit_super(sb, 1);
if (EXT4_SB(sb)->s_journal) {
/* Reset the needs_recovery flag before the fs is unlocked. */
- EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+ ext4_set_feature_journal_needs_recovery(sb);
}
ext4_commit_super(sb, 1);
ext4_mark_recovery_complete(sb, es);
} else {
/* Make sure we can mount this feature set readwrite */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_READONLY) ||
+ if (ext4_has_feature_readonly(sb) ||
!ext4_feature_set_ok(sb, 0)) {
err = -EROFS;
goto restore_opts;
if (!ext4_group_desc_csum_verify(sb, g, gdp)) {
ext4_msg(sb, KERN_ERR,
"ext4_remount: Checksum for group %u failed (%u!=%u)",
- g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)),
+ g, le16_to_cpu(ext4_group_desc_csum(sb, g, gdp)),
le16_to_cpu(gdp->bg_checksum));
- err = -EINVAL;
+ err = -EFSBADCRC;
goto restore_opts;
}
}
sbi->s_mount_state = le16_to_cpu(es->s_state);
if (!ext4_setup_super(sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_MMP))
+ if (ext4_has_feature_mmp(sb))
if (ext4_multi_mount_protect(sb,
le64_to_cpu(es->s_mmp_block))) {
err = -EROFS;
if (enable_quota) {
if (sb_any_quota_suspended(sb))
dquot_resume(sb, -1);
- else if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_QUOTA)) {
+ else if (ext4_has_feature_quota(sb)) {
err = ext4_enable_quotas(sb);
if (err)
goto restore_opts;
struct ext4_sb_info *sbi = EXT4_SB(sb);
/* Are we journaling quotas? */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA) ||
+ if (ext4_has_feature_quota(sb) ||
sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
dquot_mark_dquot_dirty(dquot);
return ext4_write_dquot(dquot);
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum)
};
- BUG_ON(!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_QUOTA));
+ BUG_ON(!ext4_has_feature_quota(sb));
if (!qf_inums[type])
return -EPERM;
static inline int ext2_feature_set_ok(struct super_block *sb)
{
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP))
+ if (ext4_has_unknown_ext2_incompat_features(sb))
return 0;
if (sb->s_flags & MS_RDONLY)
return 1;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))
+ if (ext4_has_unknown_ext2_ro_compat_features(sb))
return 0;
return 1;
}
static inline int ext3_feature_set_ok(struct super_block *sb)
{
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP))
+ if (ext4_has_unknown_ext3_incompat_features(sb))
return 0;
- if (!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
+ if (!ext4_has_feature_journal(sb))
return 0;
if (sb->s_flags & MS_RDONLY)
return 1;
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP))
+ if (ext4_has_unknown_ext3_ro_compat_features(sb))
return 0;
return 1;
}
};
MODULE_ALIAS_FS("ext4");
-static int __init ext4_init_feat_adverts(void)
-{
- struct ext4_features *ef;
- int ret = -ENOMEM;
-
- ef = kzalloc(sizeof(struct ext4_features), GFP_KERNEL);
- if (!ef)
- goto out;
-
- ef->f_kobj.kset = ext4_kset;
- init_completion(&ef->f_kobj_unregister);
- ret = kobject_init_and_add(&ef->f_kobj, &ext4_feat_ktype, NULL,
- "features");
- if (ret) {
- kfree(ef);
- goto out;
- }
-
- ext4_feat = ef;
- ret = 0;
-out:
- return ret;
-}
-
-static void ext4_exit_feat_adverts(void)
-{
- kobject_put(&ext4_feat->f_kobj);
- wait_for_completion(&ext4_feat->f_kobj_unregister);
- kfree(ext4_feat);
-}
-
/* Shared across all ext4 file systems */
wait_queue_head_t ext4__ioend_wq[EXT4_WQ_HASH_SZ];
struct mutex ext4__aio_mutex[EXT4_WQ_HASH_SZ];
err = ext4_init_pageio();
if (err)
- goto out7;
+ goto out5;
err = ext4_init_system_zone();
if (err)
- goto out6;
- ext4_kset = kset_create_and_add("ext4", NULL, fs_kobj);
- if (!ext4_kset) {
- err = -ENOMEM;
- goto out5;
- }
- ext4_proc_root = proc_mkdir("fs/ext4", NULL);
+ goto out4;
- err = ext4_init_feat_adverts();
+ err = ext4_init_sysfs();
if (err)
- goto out4;
+ goto out3;
err = ext4_init_mballoc();
if (err)
ext4_mballoc_ready = 0;
ext4_exit_mballoc();
out2:
- ext4_exit_feat_adverts();
-out4:
- if (ext4_proc_root)
- remove_proc_entry("fs/ext4", NULL);
- kset_unregister(ext4_kset);
-out5:
+ ext4_exit_sysfs();
+out3:
ext4_exit_system_zone();
-out6:
+out4:
ext4_exit_pageio();
-out7:
+out5:
ext4_exit_es();
return err;
unregister_filesystem(&ext4_fs_type);
destroy_inodecache();
ext4_exit_mballoc();
- ext4_exit_feat_adverts();
- remove_proc_entry("fs/ext4", NULL);
- kset_unregister(ext4_kset);
+ ext4_exit_sysfs();
ext4_exit_system_zone();
ext4_exit_pageio();
ext4_exit_es();
sizeof(struct ext4_encrypted_symlink_data) - 1) >
max_size) {
/* Symlink data on the disk is corrupted */
- res = -EIO;
+ res = -EFSCORRUPTED;
goto errout;
}
plen = (cstr.len < EXT4_FNAME_CRYPTO_DIGEST_SIZE*2) ?
--- /dev/null
+/*
+ * linux/fs/ext4/sysfs.c
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Theodore Ts'o (tytso@mit.edu)
+ *
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+
+#include "ext4.h"
+#include "ext4_jbd2.h"
+
+typedef enum {
+ attr_noop,
+ attr_delayed_allocation_blocks,
+ attr_session_write_kbytes,
+ attr_lifetime_write_kbytes,
+ attr_reserved_clusters,
+ attr_inode_readahead,
+ attr_trigger_test_error,
+ attr_feature,
+ attr_pointer_ui,
+ attr_pointer_atomic,
+} attr_id_t;
+
+typedef enum {
+ ptr_explicit,
+ ptr_ext4_sb_info_offset,
+ ptr_ext4_super_block_offset,
+} attr_ptr_t;
+
+static const char *proc_dirname = "fs/ext4";
+static struct proc_dir_entry *ext4_proc_root;
+
+struct ext4_attr {
+ struct attribute attr;
+ short attr_id;
+ short attr_ptr;
+ union {
+ int offset;
+ void *explicit_ptr;
+ } u;
+};
+
+static ssize_t session_write_kbytes_show(struct ext4_attr *a,
+ struct ext4_sb_info *sbi, char *buf)
+{
+ struct super_block *sb = sbi->s_buddy_cache->i_sb;
+
+ if (!sb->s_bdev->bd_part)
+ return snprintf(buf, PAGE_SIZE, "0\n");
+ return snprintf(buf, PAGE_SIZE, "%lu\n",
+ (part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
+ sbi->s_sectors_written_start) >> 1);
+}
+
+static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a,
+ struct ext4_sb_info *sbi, char *buf)
+{
+ struct super_block *sb = sbi->s_buddy_cache->i_sb;
+
+ if (!sb->s_bdev->bd_part)
+ return snprintf(buf, PAGE_SIZE, "0\n");
+ return snprintf(buf, PAGE_SIZE, "%llu\n",
+ (unsigned long long)(sbi->s_kbytes_written +
+ ((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
+ EXT4_SB(sb)->s_sectors_written_start) >> 1)));
+}
+
+static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
+ struct ext4_sb_info *sbi,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int ret;
+
+ ret = kstrtoul(skip_spaces(buf), 0, &t);
+ if (ret)
+ return ret;
+
+ if (t && (!is_power_of_2(t) || t > 0x40000000))
+ return -EINVAL;
+
+ sbi->s_inode_readahead_blks = t;
+ return count;
+}
+
+static ssize_t reserved_clusters_store(struct ext4_attr *a,
+ struct ext4_sb_info *sbi,
+ const char *buf, size_t count)
+{
+ unsigned long long val;
+ ext4_fsblk_t clusters = (ext4_blocks_count(sbi->s_es) >>
+ sbi->s_cluster_bits);
+ int ret;
+
+ ret = kstrtoull(skip_spaces(buf), 0, &val);
+ if (!ret || val >= clusters)
+ return -EINVAL;
+
+ atomic64_set(&sbi->s_resv_clusters, val);
+ return count;
+}
+
+static ssize_t trigger_test_error(struct ext4_attr *a,
+ struct ext4_sb_info *sbi,
+ const char *buf, size_t count)
+{
+ int len = count;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (len && buf[len-1] == '\n')
+ len--;
+
+ if (len)
+ ext4_error(sbi->s_sb, "%.*s", len, buf);
+ return count;
+}
+
+#define EXT4_ATTR(_name,_mode,_id) \
+static struct ext4_attr ext4_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .attr_id = attr_##_id, \
+}
+
+#define EXT4_ATTR_FUNC(_name,_mode) EXT4_ATTR(_name,_mode,_name)
+
+#define EXT4_ATTR_FEATURE(_name) EXT4_ATTR(_name, 0444, feature)
+
+#define EXT4_ATTR_OFFSET(_name,_mode,_id,_struct,_elname) \
+static struct ext4_attr ext4_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .attr_id = attr_##_id, \
+ .attr_ptr = ptr_##_struct##_offset, \
+ .u = { \
+ .offset = offsetof(struct _struct, _elname),\
+ }, \
+}
+
+#define EXT4_RO_ATTR_ES_UI(_name,_elname) \
+ EXT4_ATTR_OFFSET(_name, 0444, pointer_ui, ext4_super_block, _elname)
+
+#define EXT4_RW_ATTR_SBI_UI(_name,_elname) \
+ EXT4_ATTR_OFFSET(_name, 0644, pointer_ui, ext4_sb_info, _elname)
+
+#define EXT4_ATTR_PTR(_name,_mode,_id,_ptr) \
+static struct ext4_attr ext4_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .attr_id = attr_##_id, \
+ .attr_ptr = ptr_explicit, \
+ .u = { \
+ .explicit_ptr = _ptr, \
+ }, \
+}
+
+#define ATTR_LIST(name) &ext4_attr_##name.attr
+
+EXT4_ATTR_FUNC(delayed_allocation_blocks, 0444);
+EXT4_ATTR_FUNC(session_write_kbytes, 0444);
+EXT4_ATTR_FUNC(lifetime_write_kbytes, 0444);
+EXT4_ATTR_FUNC(reserved_clusters, 0644);
+
+EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, inode_readahead,
+ ext4_sb_info, s_inode_readahead_blks);
+EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
+EXT4_RW_ATTR_SBI_UI(mb_stats, s_mb_stats);
+EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan);
+EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
+EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
+EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
+EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
+EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error);
+EXT4_RW_ATTR_SBI_UI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
+EXT4_RW_ATTR_SBI_UI(err_ratelimit_burst, s_err_ratelimit_state.burst);
+EXT4_RW_ATTR_SBI_UI(warning_ratelimit_interval_ms, s_warning_ratelimit_state.interval);
+EXT4_RW_ATTR_SBI_UI(warning_ratelimit_burst, s_warning_ratelimit_state.burst);
+EXT4_RW_ATTR_SBI_UI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval);
+EXT4_RW_ATTR_SBI_UI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);
+EXT4_RO_ATTR_ES_UI(errors_count, s_error_count);
+EXT4_RO_ATTR_ES_UI(first_error_time, s_first_error_time);
+EXT4_RO_ATTR_ES_UI(last_error_time, s_last_error_time);
+
+static unsigned int old_bump_val = 128;
+EXT4_ATTR_PTR(max_writeback_mb_bump, 0444, pointer_ui, &old_bump_val);
+
+static struct attribute *ext4_attrs[] = {
+ ATTR_LIST(delayed_allocation_blocks),
+ ATTR_LIST(session_write_kbytes),
+ ATTR_LIST(lifetime_write_kbytes),
+ ATTR_LIST(reserved_clusters),
+ ATTR_LIST(inode_readahead_blks),
+ ATTR_LIST(inode_goal),
+ ATTR_LIST(mb_stats),
+ ATTR_LIST(mb_max_to_scan),
+ ATTR_LIST(mb_min_to_scan),
+ ATTR_LIST(mb_order2_req),
+ ATTR_LIST(mb_stream_req),
+ ATTR_LIST(mb_group_prealloc),
+ ATTR_LIST(max_writeback_mb_bump),
+ ATTR_LIST(extent_max_zeroout_kb),
+ ATTR_LIST(trigger_fs_error),
+ ATTR_LIST(err_ratelimit_interval_ms),
+ ATTR_LIST(err_ratelimit_burst),
+ ATTR_LIST(warning_ratelimit_interval_ms),
+ ATTR_LIST(warning_ratelimit_burst),
+ ATTR_LIST(msg_ratelimit_interval_ms),
+ ATTR_LIST(msg_ratelimit_burst),
+ ATTR_LIST(errors_count),
+ ATTR_LIST(first_error_time),
+ ATTR_LIST(last_error_time),
+ NULL,
+};
+
+/* Features this copy of ext4 supports */
+EXT4_ATTR_FEATURE(lazy_itable_init);
+EXT4_ATTR_FEATURE(batched_discard);
+EXT4_ATTR_FEATURE(meta_bg_resize);
+EXT4_ATTR_FEATURE(encryption);
+EXT4_ATTR_FEATURE(metadata_csum_seed);
+
+static struct attribute *ext4_feat_attrs[] = {
+ ATTR_LIST(lazy_itable_init),
+ ATTR_LIST(batched_discard),
+ ATTR_LIST(meta_bg_resize),
+ ATTR_LIST(encryption),
+ ATTR_LIST(metadata_csum_seed),
+ NULL,
+};
+
+static void *calc_ptr(struct ext4_attr *a, struct ext4_sb_info *sbi)
+{
+ switch (a->attr_ptr) {
+ case ptr_explicit:
+ return a->u.explicit_ptr;
+ case ptr_ext4_sb_info_offset:
+ return (void *) (((char *) sbi) + a->u.offset);
+ case ptr_ext4_super_block_offset:
+ return (void *) (((char *) sbi->s_es) + a->u.offset);
+ }
+ return NULL;
+}
+
+static ssize_t ext4_attr_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
+ s_kobj);
+ struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
+ void *ptr = calc_ptr(a, sbi);
+
+ switch (a->attr_id) {
+ case attr_delayed_allocation_blocks:
+ return snprintf(buf, PAGE_SIZE, "%llu\n",
+ (s64) EXT4_C2B(sbi,
+ percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
+ case attr_session_write_kbytes:
+ return session_write_kbytes_show(a, sbi, buf);
+ case attr_lifetime_write_kbytes:
+ return lifetime_write_kbytes_show(a, sbi, buf);
+ case attr_reserved_clusters:
+ return snprintf(buf, PAGE_SIZE, "%llu\n",
+ (unsigned long long)
+ atomic64_read(&sbi->s_resv_clusters));
+ case attr_inode_readahead:
+ case attr_pointer_ui:
+ if (!ptr)
+ return 0;
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ *((unsigned int *) ptr));
+ case attr_pointer_atomic:
+ if (!ptr)
+ return 0;
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ atomic_read((atomic_t *) ptr));
+ case attr_feature:
+ return snprintf(buf, PAGE_SIZE, "supported\n");
+ }
+
+ return 0;
+}
+
+static ssize_t ext4_attr_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *buf, size_t len)
+{
+ struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
+ s_kobj);
+ struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
+ void *ptr = calc_ptr(a, sbi);
+ unsigned long t;
+ int ret;
+
+ switch (a->attr_id) {
+ case attr_reserved_clusters:
+ return reserved_clusters_store(a, sbi, buf, len);
+ case attr_pointer_ui:
+ if (!ptr)
+ return 0;
+ ret = kstrtoul(skip_spaces(buf), 0, &t);
+ if (ret)
+ return ret;
+ *((unsigned int *) ptr) = t;
+ return len;
+ case attr_inode_readahead:
+ return inode_readahead_blks_store(a, sbi, buf, len);
+ case attr_trigger_test_error:
+ return trigger_test_error(a, sbi, buf, len);
+ }
+ return 0;
+}
+
+static void ext4_sb_release(struct kobject *kobj)
+{
+ struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
+ s_kobj);
+ complete(&sbi->s_kobj_unregister);
+}
+
+static const struct sysfs_ops ext4_attr_ops = {
+ .show = ext4_attr_show,
+ .store = ext4_attr_store,
+};
+
+static struct kobj_type ext4_sb_ktype = {
+ .default_attrs = ext4_attrs,
+ .sysfs_ops = &ext4_attr_ops,
+ .release = ext4_sb_release,
+};
+
+static struct kobj_type ext4_ktype = {
+ .sysfs_ops = &ext4_attr_ops,
+};
+
+static struct kset ext4_kset = {
+ .kobj = {.ktype = &ext4_ktype},
+};
+
+static struct kobj_type ext4_feat_ktype = {
+ .default_attrs = ext4_feat_attrs,
+ .sysfs_ops = &ext4_attr_ops,
+};
+
+static struct kobject ext4_feat = {
+ .kset = &ext4_kset,
+};
+
+#define PROC_FILE_SHOW_DEFN(name) \
+static int name##_open(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, ext4_seq_##name##_show, PDE_DATA(inode)); \
+} \
+\
+const struct file_operations ext4_seq_##name##_fops = { \
+ .owner = THIS_MODULE, \
+ .open = name##_open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+}
+
+#define PROC_FILE_LIST(name) \
+ { __stringify(name), &ext4_seq_##name##_fops }
+
+PROC_FILE_SHOW_DEFN(es_shrinker_info);
+PROC_FILE_SHOW_DEFN(options);
+
+static struct ext4_proc_files {
+ const char *name;
+ const struct file_operations *fops;
+} proc_files[] = {
+ PROC_FILE_LIST(options),
+ PROC_FILE_LIST(es_shrinker_info),
+ PROC_FILE_LIST(mb_groups),
+ { NULL, NULL },
+};
+
+int ext4_register_sysfs(struct super_block *sb)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ struct ext4_proc_files *p;
+ int err;
+
+ sbi->s_kobj.kset = &ext4_kset;
+ init_completion(&sbi->s_kobj_unregister);
+ err = kobject_init_and_add(&sbi->s_kobj, &ext4_sb_ktype, NULL,
+ "%s", sb->s_id);
+ if (err)
+ return err;
+
+ if (ext4_proc_root)
+ sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
+
+ if (sbi->s_proc) {
+ for (p = proc_files; p->name; p++)
+ proc_create_data(p->name, S_IRUGO, sbi->s_proc,
+ p->fops, sb);
+ }
+ return 0;
+}
+
+void ext4_unregister_sysfs(struct super_block *sb)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ struct ext4_proc_files *p;
+
+ if (sbi->s_proc) {
+ for (p = proc_files; p->name; p++)
+ remove_proc_entry(p->name, sbi->s_proc);
+ remove_proc_entry(sb->s_id, ext4_proc_root);
+ }
+ kobject_del(&sbi->s_kobj);
+}
+
+int __init ext4_init_sysfs(void)
+{
+ int ret;
+
+ kobject_set_name(&ext4_kset.kobj, "ext4");
+ ext4_kset.kobj.parent = fs_kobj;
+ ret = kset_register(&ext4_kset);
+ if (ret)
+ return ret;
+
+ ret = kobject_init_and_add(&ext4_feat, &ext4_feat_ktype,
+ NULL, "features");
+ if (ret)
+ kset_unregister(&ext4_kset);
+ else
+ ext4_proc_root = proc_mkdir(proc_dirname, NULL);
+ return ret;
+}
+
+void ext4_exit_sysfs(void)
+{
+ kobject_put(&ext4_feat);
+ kset_unregister(&ext4_kset);
+ remove_proc_entry(proc_dirname, NULL);
+ ext4_proc_root = NULL;
+}
+
while (!IS_LAST_ENTRY(e)) {
struct ext4_xattr_entry *next = EXT4_XATTR_NEXT(e);
if ((void *)next >= end)
- return -EIO;
+ return -EFSCORRUPTED;
e = next;
}
(void *)e + sizeof(__u32) ||
value_start + le16_to_cpu(entry->e_value_offs) +
le32_to_cpu(entry->e_value_size) > end))
- return -EIO;
+ return -EFSCORRUPTED;
entry = EXT4_XATTR_NEXT(entry);
}
if (BHDR(bh)->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC) ||
BHDR(bh)->h_blocks != cpu_to_le32(1))
- return -EIO;
+ return -EFSCORRUPTED;
if (!ext4_xattr_block_csum_verify(inode, bh->b_blocknr, BHDR(bh)))
- return -EIO;
+ return -EFSBADCRC;
error = ext4_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size,
bh->b_data);
if (!error)
if (entry->e_value_block != 0 || value_size > size ||
le16_to_cpu(entry->e_value_offs) + value_size > size)
- return -EIO;
+ return -EFSCORRUPTED;
return 0;
}
}
*pentry = entry;
if (!cmp && ext4_xattr_check_entry(entry, size))
- return -EIO;
+ return -EFSCORRUPTED;
return cmp ? -ENODATA : 0;
}
bad_block:
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
- error = -EIO;
+ error = -EFSCORRUPTED;
goto cleanup;
}
ext4_xattr_cache_insert(ext4_mb_cache, bh);
entry = BFIRST(bh);
error = ext4_xattr_find_entry(&entry, name_index, name, bh->b_size, 1);
- if (error == -EIO)
+ if (error == -EFSCORRUPTED)
goto bad_block;
if (error)
goto cleanup;
if (ext4_xattr_check_block(inode, bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
- error = -EIO;
+ error = -EFSCORRUPTED;
goto cleanup;
}
ext4_xattr_cache_insert(ext4_mb_cache, bh);
static void ext4_xattr_update_super_block(handle_t *handle,
struct super_block *sb)
{
- if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_EXT_ATTR))
+ if (ext4_has_feature_xattr(sb))
return;
BUFFER_TRACE(EXT4_SB(sb)->s_sbh, "get_write_access");
if (ext4_journal_get_write_access(handle, EXT4_SB(sb)->s_sbh) == 0) {
- EXT4_SET_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_EXT_ATTR);
+ ext4_set_feature_xattr(sb);
ext4_handle_dirty_super(handle, sb);
}
}
if (ext4_xattr_check_block(inode, bs->bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
- error = -EIO;
+ error = -EFSCORRUPTED;
goto cleanup;
}
/* Find the named attribute. */
bs->bh);
}
unlock_buffer(bs->bh);
- if (error == -EIO)
+ if (error == -EFSCORRUPTED)
goto bad_block;
if (!error)
error = ext4_handle_dirty_xattr_block(handle,
}
error = ext4_xattr_set_entry(i, s);
- if (error == -EIO)
+ if (error == -EFSCORRUPTED)
goto bad_block;
if (error)
goto cleanup;
if (ext4_xattr_check_block(inode, bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
- error = -EIO;
+ error = -EFSCORRUPTED;
goto cleanup;
}
base = BHDR(bh);
memcmp(entry1->e_name, entry2->e_name, entry1->e_name_len))
return 1;
if (entry1->e_value_block != 0 || entry2->e_value_block != 0)
- return -EIO;
+ return -EFSCORRUPTED;
if (memcmp((char *)header1 + le16_to_cpu(entry1->e_value_offs),
(char *)header2 + le16_to_cpu(entry2->e_value_offs),
le32_to_cpu(entry1->e_value_size)))
/*
* We guarantee no failure on the returned page.
*/
-struct page *get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index)
+static struct page *__get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index,
+ bool is_meta)
{
struct address_space *mapping = META_MAPPING(sbi);
struct page *page;
.blk_addr = index,
.encrypted_page = NULL,
};
+
+ if (unlikely(!is_meta))
+ fio.rw &= ~REQ_META;
repeat:
page = grab_cache_page(mapping, index);
if (!page) {
return page;
}
+struct page *get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index)
+{
+ return __get_meta_page(sbi, index, true);
+}
+
+/* for POR only */
+struct page *get_tmp_page(struct f2fs_sb_info *sbi, pgoff_t index)
+{
+ return __get_meta_page(sbi, index, false);
+}
+
bool is_valid_blkaddr(struct f2fs_sb_info *sbi, block_t blkaddr, int type)
{
switch (type) {
/*
* Readahead CP/NAT/SIT/SSA pages
*/
-int ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages, int type)
+int ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
+ int type, bool sync)
{
block_t prev_blk_addr = 0;
struct page *page;
struct f2fs_io_info fio = {
.sbi = sbi,
.type = META,
- .rw = READ_SYNC | REQ_META | REQ_PRIO,
+ .rw = sync ? (READ_SYNC | REQ_META | REQ_PRIO) : READA,
.encrypted_page = NULL,
};
+ if (unlikely(type == META_POR))
+ fio.rw &= ~REQ_META;
+
for (; nrpages-- > 0; blkno++) {
if (!is_valid_blkaddr(sbi, blkno, type))
f2fs_put_page(page, 0);
if (readahead)
- ra_meta_pages(sbi, index, MAX_BIO_BLOCKS(sbi), META_POR);
+ ra_meta_pages(sbi, index, MAX_BIO_BLOCKS(sbi), META_POR, true);
}
static int f2fs_write_meta_page(struct page *page,
long nr_to_write)
{
struct address_space *mapping = META_MAPPING(sbi);
- pgoff_t index = 0, end = LONG_MAX;
+ pgoff_t index = 0, end = LONG_MAX, prev = LONG_MAX;
struct pagevec pvec;
long nwritten = 0;
struct writeback_control wbc = {
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
+ if (prev == LONG_MAX)
+ prev = page->index - 1;
+ if (nr_to_write != LONG_MAX && page->index != prev + 1) {
+ pagevec_release(&pvec);
+ goto stop;
+ }
+
lock_page(page);
if (unlikely(page->mapping != mapping)) {
break;
}
nwritten++;
+ prev = page->index;
if (unlikely(nwritten >= nr_to_write))
break;
}
pagevec_release(&pvec);
cond_resched();
}
-
+stop:
if (nwritten)
f2fs_submit_merged_bio(sbi, type, WRITE);
start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi);
orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi);
- ra_meta_pages(sbi, start_blk, orphan_blocks, META_CP);
+ ra_meta_pages(sbi, start_blk, orphan_blocks, META_CP, true);
for (i = 0; i < orphan_blocks; i++) {
struct page *page = get_meta_page(sbi, start_blk + i);
start_blk = __start_cp_addr(sbi);
+ /* need to wait for end_io results */
+ wait_on_all_pages_writeback(sbi);
+ if (unlikely(f2fs_cp_error(sbi)))
+ return;
+
/* write out checkpoint buffer at block 0 */
update_meta_page(sbi, ckpt, start_blk++);
if (cpc->reason == CP_RECOVERY)
f2fs_msg(sbi->sb, KERN_NOTICE,
"checkpoint: version = %llx", ckpt_ver);
+
+ /* do checkpoint periodically */
+ sbi->cp_expires = round_jiffies_up(jiffies + HZ * sbi->cp_interval);
out:
mutex_unlock(&sbi->cp_mutex);
trace_f2fs_write_checkpoint(sbi->sb, cpc->reason, "finish checkpoint");
return f2fs_reserve_block(dn, index);
}
-struct page *get_read_data_page(struct inode *inode, pgoff_t index, int rw)
+struct page *get_read_data_page(struct inode *inode, pgoff_t index,
+ int rw, bool for_write)
{
struct address_space *mapping = inode->i_mapping;
struct dnode_of_data dn;
if (f2fs_encrypted_inode(inode) && S_ISREG(inode->i_mode))
return read_mapping_page(mapping, index, NULL);
- page = grab_cache_page(mapping, index);
+ page = f2fs_grab_cache_page(mapping, index, for_write);
if (!page)
return ERR_PTR(-ENOMEM);
return page;
f2fs_put_page(page, 0);
- page = get_read_data_page(inode, index, READ_SYNC);
+ page = get_read_data_page(inode, index, READ_SYNC, false);
if (IS_ERR(page))
return page;
* Because, the callers, functions in dir.c and GC, should be able to know
* whether this page exists or not.
*/
-struct page *get_lock_data_page(struct inode *inode, pgoff_t index)
+struct page *get_lock_data_page(struct inode *inode, pgoff_t index,
+ bool for_write)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
repeat:
- page = get_read_data_page(inode, index, READ_SYNC);
+ page = get_read_data_page(inode, index, READ_SYNC, for_write);
if (IS_ERR(page))
return page;
struct dnode_of_data dn;
int err;
repeat:
- page = grab_cache_page(mapping, index);
+ page = f2fs_grab_cache_page(mapping, index, true);
if (!page) {
/*
* before exiting, we should make sure ipage will be released
} else {
f2fs_put_page(page, 1);
- page = get_read_data_page(inode, index, READ_SYNC);
+ page = get_read_data_page(inode, index, READ_SYNC, true);
if (IS_ERR(page))
goto repeat;
lock_page(page);
}
got_it:
- if (new_i_size &&
- i_size_read(inode) < ((index + 1) << PAGE_CACHE_SHIFT)) {
- i_size_write(inode, ((index + 1) << PAGE_CACHE_SHIFT));
+ if (new_i_size && i_size_read(inode) <
+ ((loff_t)(index + 1) << PAGE_CACHE_SHIFT)) {
+ i_size_write(inode, ((loff_t)(index + 1) << PAGE_CACHE_SHIFT));
/* Only the directory inode sets new_i_size */
set_inode_flag(F2FS_I(inode), FI_UPDATE_DIR);
}
/* update i_size */
fofs = start_bidx_of_node(ofs_of_node(dn->node_page), fi) +
dn->ofs_in_node;
- if (i_size_read(dn->inode) < ((fofs + 1) << PAGE_CACHE_SHIFT))
- i_size_write(dn->inode, ((fofs + 1) << PAGE_CACHE_SHIFT));
+ if (i_size_read(dn->inode) < ((loff_t)(fofs + 1) << PAGE_CACHE_SHIFT))
+ i_size_write(dn->inode,
+ ((loff_t)(fofs + 1) << PAGE_CACHE_SHIFT));
/* direct IO doesn't use extent cache to maximize the performance */
f2fs_drop_largest_extent(dn->inode, fofs);
while (dn.ofs_in_node < end_offset && len) {
block_t blkaddr;
+ if (unlikely(f2fs_cp_error(sbi)))
+ goto sync_out;
+
blkaddr = datablock_addr(dn.node_page, dn.ofs_in_node);
if (blkaddr == NULL_ADDR || blkaddr == NEW_ADDR) {
if (__allocate_data_block(&dn))
{
unsigned int maxblocks = map->m_len;
struct dnode_of_data dn;
+ struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int mode = create ? ALLOC_NODE : LOOKUP_NODE_RA;
pgoff_t pgofs, end_offset;
int err = 0, ofs = 1;
err = 0;
goto unlock_out;
}
- if (dn.data_blkaddr == NEW_ADDR) {
- if (flag == F2FS_GET_BLOCK_BMAP) {
- err = -ENOENT;
- goto put_out;
- } else if (flag == F2FS_GET_BLOCK_READ ||
- flag == F2FS_GET_BLOCK_DIO) {
- goto put_out;
+
+ if (dn.data_blkaddr == NEW_ADDR || dn.data_blkaddr == NULL_ADDR) {
+ if (create) {
+ if (unlikely(f2fs_cp_error(sbi))) {
+ err = -EIO;
+ goto put_out;
+ }
+ err = __allocate_data_block(&dn);
+ if (err)
+ goto put_out;
+ allocated = true;
+ map->m_flags = F2FS_MAP_NEW;
+ } else {
+ if (flag != F2FS_GET_BLOCK_FIEMAP ||
+ dn.data_blkaddr != NEW_ADDR) {
+ if (flag == F2FS_GET_BLOCK_BMAP)
+ err = -ENOENT;
+ goto put_out;
+ }
+
+ /*
+ * preallocated unwritten block should be mapped
+ * for fiemap.
+ */
+ if (dn.data_blkaddr == NEW_ADDR)
+ map->m_flags = F2FS_MAP_UNWRITTEN;
}
- /*
- * if it is in fiemap call path (flag = F2FS_GET_BLOCK_FIEMAP),
- * mark it as mapped and unwritten block.
- */
}
- if (dn.data_blkaddr != NULL_ADDR) {
- map->m_flags = F2FS_MAP_MAPPED;
- map->m_pblk = dn.data_blkaddr;
- if (dn.data_blkaddr == NEW_ADDR)
- map->m_flags |= F2FS_MAP_UNWRITTEN;
- } else if (create) {
- err = __allocate_data_block(&dn);
- if (err)
- goto put_out;
- allocated = true;
- map->m_flags = F2FS_MAP_NEW | F2FS_MAP_MAPPED;
- map->m_pblk = dn.data_blkaddr;
- } else {
- if (flag == F2FS_GET_BLOCK_BMAP)
- err = -ENOENT;
- goto put_out;
- }
+ map->m_flags |= F2FS_MAP_MAPPED;
+ map->m_pblk = dn.data_blkaddr;
+ map->m_len = 1;
end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
- map->m_len = 1;
dn.ofs_in_node++;
pgofs++;
goto unlock_out;
}
- if (dn.data_blkaddr == NEW_ADDR &&
- flag != F2FS_GET_BLOCK_FIEMAP)
- goto put_out;
-
end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
}
if (maxblocks > map->m_len) {
block_t blkaddr = datablock_addr(dn.node_page, dn.ofs_in_node);
- if (blkaddr == NULL_ADDR && create) {
- err = __allocate_data_block(&dn);
- if (err)
- goto sync_out;
- allocated = true;
- map->m_flags |= F2FS_MAP_NEW;
- blkaddr = dn.data_blkaddr;
+
+ if (blkaddr == NEW_ADDR || blkaddr == NULL_ADDR) {
+ if (create) {
+ if (unlikely(f2fs_cp_error(sbi))) {
+ err = -EIO;
+ goto sync_out;
+ }
+ err = __allocate_data_block(&dn);
+ if (err)
+ goto sync_out;
+ allocated = true;
+ map->m_flags |= F2FS_MAP_NEW;
+ blkaddr = dn.data_blkaddr;
+ } else {
+ /*
+ * we only merge preallocated unwritten blocks
+ * for fiemap.
+ */
+ if (flag != F2FS_GET_BLOCK_FIEMAP ||
+ blkaddr != NEW_ADDR)
+ goto sync_out;
+ }
}
+
/* Give more consecutive addresses for the readahead */
if ((map->m_pblk != NEW_ADDR &&
blkaddr == (map->m_pblk + ofs)) ||
if (ret)
return ret;
+ if (f2fs_has_inline_data(inode)) {
+ ret = f2fs_inline_data_fiemap(inode, fieinfo, start, len);
+ if (ret != -EAGAIN)
+ return ret;
+ }
+
mutex_lock(&inode->i_mutex);
if (len >= isize) {
map.m_lblk = block_in_file;
map.m_len = last_block - block_in_file;
- if (f2fs_map_blocks(inode, &map, 0, false))
+ if (f2fs_map_blocks(inode, &map, 0,
+ F2FS_GET_BLOCK_READ))
goto set_error_page;
}
got_it:
if (f2fs_encrypted_inode(inode) &&
S_ISREG(inode->i_mode)) {
- struct page *cpage;
ctx = f2fs_get_crypto_ctx(inode);
if (IS_ERR(ctx))
goto set_error_page;
/* wait the page to be moved by cleaning */
- cpage = find_lock_page(
- META_MAPPING(F2FS_I_SB(inode)),
- block_nr);
- if (cpage) {
- f2fs_wait_on_page_writeback(cpage,
- DATA);
- f2fs_put_page(cpage, 1);
- }
+ f2fs_wait_on_encrypted_page_writeback(
+ F2FS_I_SB(inode), block_nr);
}
bio = bio_alloc(GFP_KERNEL,
struct list_head *pages, unsigned nr_pages)
{
struct inode *inode = file->f_mapping->host;
+ struct page *page = list_entry(pages->prev, struct page, lru);
+
+ trace_f2fs_readpages(inode, page, nr_pages);
/* If the file has inline data, skip readpages */
if (f2fs_has_inline_data(inode))
}
if (f2fs_encrypted_inode(inode) && S_ISREG(inode->i_mode)) {
+
+ /* wait for GCed encrypted page writeback */
+ f2fs_wait_on_encrypted_page_writeback(F2FS_I_SB(inode),
+ fio->blk_addr);
+
fio->encrypted_page = f2fs_encrypt(inode, fio->page);
if (IS_ERR(fio->encrypted_page)) {
err = PTR_ERR(fio->encrypted_page);
f2fs_wait_on_page_writeback(page, DATA);
+ /* wait for GCed encrypted page writeback */
+ if (f2fs_encrypted_inode(inode) && S_ISREG(inode->i_mode))
+ f2fs_wait_on_encrypted_page_writeback(sbi, dn.data_blkaddr);
+
if (len == PAGE_CACHE_SIZE)
goto out_update;
if (PageUptodate(page))
trace_f2fs_direct_IO_enter(inode, offset, count, iov_iter_rw(iter));
- if (iov_iter_rw(iter) == WRITE)
+ if (iov_iter_rw(iter) == WRITE) {
__allocate_data_blocks(inode, offset, count);
+ if (unlikely(f2fs_cp_error(F2FS_I_SB(inode)))) {
+ err = -EIO;
+ goto out;
+ }
+ }
err = blockdev_direct_IO(iocb, inode, iter, offset, get_data_block_dio);
+out:
if (err < 0 && iov_iter_rw(iter) == WRITE)
f2fs_write_failed(mapping, offset + count);
{
struct inode *inode = mapping->host;
- /* we don't need to use inline_data strictly */
- if (f2fs_has_inline_data(inode)) {
- int err = f2fs_convert_inline_inode(inode);
- if (err)
- return err;
- }
+ if (f2fs_has_inline_data(inode))
+ return 0;
+
+ /* make sure allocating whole blocks */
+ if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
+ filemap_write_and_wait(mapping);
+
return generic_block_bmap(mapping, block, get_data_block_bmap);
}
int i;
/* validation check of the segment numbers */
- si->hit_largest = atomic_read(&sbi->read_hit_largest);
- si->hit_cached = atomic_read(&sbi->read_hit_cached);
- si->hit_rbtree = atomic_read(&sbi->read_hit_rbtree);
+ si->hit_largest = atomic64_read(&sbi->read_hit_largest);
+ si->hit_cached = atomic64_read(&sbi->read_hit_cached);
+ si->hit_rbtree = atomic64_read(&sbi->read_hit_rbtree);
si->hit_total = si->hit_largest + si->hit_cached + si->hit_rbtree;
- si->total_ext = atomic_read(&sbi->total_hit_ext);
+ si->total_ext = atomic64_read(&sbi->total_hit_ext);
si->ext_tree = sbi->total_ext_tree;
si->ext_node = atomic_read(&sbi->total_ext_node);
si->ndirty_node = get_pages(sbi, F2FS_DIRTY_NODES);
}
}
dist = div_u64(MAIN_SECS(sbi) * hblks_per_sec * hblks_per_sec, 100);
- si->bimodal = div_u64(bimodal, dist);
+ si->bimodal = div64_u64(bimodal, dist);
if (si->dirty_count)
si->avg_vblocks = div_u64(total_vblocks, ndirty);
else
si->page_mem = 0;
npages = NODE_MAPPING(sbi)->nrpages;
- si->page_mem += npages << PAGE_CACHE_SHIFT;
+ si->page_mem += (unsigned long long)npages << PAGE_CACHE_SHIFT;
npages = META_MAPPING(sbi)->nrpages;
- si->page_mem += npages << PAGE_CACHE_SHIFT;
+ si->page_mem += (unsigned long long)npages << PAGE_CACHE_SHIFT;
}
static int stat_show(struct seq_file *s, void *v)
seq_printf(s, " - node blocks : %d (%d)\n", si->node_blks,
si->bg_node_blks);
seq_puts(s, "\nExtent Cache:\n");
- seq_printf(s, " - Hit Count: L1-1:%d L1-2:%d L2:%d\n",
+ seq_printf(s, " - Hit Count: L1-1:%llu L1-2:%llu L2:%llu\n",
si->hit_largest, si->hit_cached,
si->hit_rbtree);
- seq_printf(s, " - Hit Ratio: %d%% (%d / %d)\n",
+ seq_printf(s, " - Hit Ratio: %llu%% (%llu / %llu)\n",
!si->total_ext ? 0 :
- (si->hit_total * 100) / si->total_ext,
+ div64_u64(si->hit_total * 100, si->total_ext),
si->hit_total, si->total_ext);
seq_printf(s, " - Inner Struct Count: tree: %d, node: %d\n",
si->ext_tree, si->ext_node);
/* memory footprint */
update_mem_info(si->sbi);
- seq_printf(s, "\nMemory: %u KB\n",
+ seq_printf(s, "\nMemory: %llu KB\n",
(si->base_mem + si->cache_mem + si->page_mem) >> 10);
- seq_printf(s, " - static: %u KB\n",
+ seq_printf(s, " - static: %llu KB\n",
si->base_mem >> 10);
- seq_printf(s, " - cached: %u KB\n",
+ seq_printf(s, " - cached: %llu KB\n",
si->cache_mem >> 10);
- seq_printf(s, " - paged : %u KB\n",
+ seq_printf(s, " - paged : %llu KB\n",
si->page_mem >> 10);
}
mutex_unlock(&f2fs_stat_mutex);
si->sbi = sbi;
sbi->stat_info = si;
- atomic_set(&sbi->total_hit_ext, 0);
- atomic_set(&sbi->read_hit_rbtree, 0);
- atomic_set(&sbi->read_hit_largest, 0);
- atomic_set(&sbi->read_hit_cached, 0);
+ atomic64_set(&sbi->total_hit_ext, 0);
+ atomic64_set(&sbi->read_hit_rbtree, 0);
+ atomic64_set(&sbi->read_hit_largest, 0);
+ atomic64_set(&sbi->read_hit_cached, 0);
atomic_set(&sbi->inline_xattr, 0);
atomic_set(&sbi->inline_inode, 0);
if (f2fs_has_inline_dentry(dir))
return f2fs_parent_inline_dir(dir, p);
- page = get_lock_data_page(dir, 0);
+ page = get_lock_data_page(dir, 0, false);
if (IS_ERR(page))
return NULL;
return f2fs_empty_inline_dir(dir);
for (bidx = 0; bidx < nblock; bidx++) {
- dentry_page = get_lock_data_page(dir, bidx);
+ dentry_page = get_lock_data_page(dir, bidx, false);
if (IS_ERR(dentry_page)) {
if (PTR_ERR(dentry_page) == -ENOENT)
continue;
else
d_type = DT_UNKNOWN;
- /* encrypted case */
de_name.name = d->filename[bit_pos];
de_name.len = le16_to_cpu(de->name_len);
int save_len = fstr->len;
int ret;
+ de_name.name = kmalloc(de_name.len, GFP_NOFS);
+ if (!de_name.name)
+ return false;
+
+ memcpy(de_name.name, d->filename[bit_pos], de_name.len);
+
ret = f2fs_fname_disk_to_usr(d->inode, &de->hash_code,
&de_name, fstr);
- de_name = *fstr;
- fstr->len = save_len;
+ kfree(de_name.name);
if (ret < 0)
return true;
+
+ de_name = *fstr;
+ fstr->len = save_len;
}
if (!dir_emit(ctx, de_name.name, de_name.len,
min(npages - n, (pgoff_t)MAX_DIR_RA_PAGES));
for (; n < npages; n++) {
- dentry_page = get_lock_data_page(inode, n);
+ dentry_page = get_lock_data_page(inode, n, false);
if (IS_ERR(dentry_page))
continue;
return count - et->count;
}
-static void __drop_largest_extent(struct inode *inode, pgoff_t fofs)
+static void __drop_largest_extent(struct inode *inode,
+ pgoff_t fofs, unsigned int len)
{
struct extent_info *largest = &F2FS_I(inode)->extent_tree->largest;
- if (largest->fofs <= fofs && largest->fofs + largest->len > fofs)
+ if (fofs < largest->fofs + largest->len && fofs + len > largest->fofs)
largest->len = 0;
}
if (!f2fs_may_extent_tree(inode))
return;
- __drop_largest_extent(inode, fofs);
+ __drop_largest_extent(inode, fofs, 1);
}
void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext)
}
if (en) {
- if (en->ei.len > et->largest.len)
- et->largest = en->ei;
+ __try_update_largest_extent(et, en);
et->cached_en = en;
}
return en;
if (!en)
return NULL;
- if (en->ei.len > et->largest.len)
- et->largest = en->ei;
+ __try_update_largest_extent(et, en);
et->cached_en = en;
return en;
}
-unsigned int f2fs_update_extent_tree_range(struct inode *inode,
+static unsigned int f2fs_update_extent_tree_range(struct inode *inode,
pgoff_t fofs, block_t blkaddr, unsigned int len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct extent_tree *et = F2FS_I(inode)->extent_tree;
- struct extent_node *en = NULL, *en1 = NULL, *en2 = NULL, *en3 = NULL;
+ struct extent_node *en = NULL, *en1 = NULL;
struct extent_node *prev_en = NULL, *next_en = NULL;
struct extent_info ei, dei, prev;
struct rb_node **insert_p = NULL, *insert_parent = NULL;
if (!et)
return false;
+ trace_f2fs_update_extent_tree_range(inode, fofs, blkaddr, len);
+
write_lock(&et->lock);
if (is_inode_flag_set(F2FS_I(inode), FI_NO_EXTENT)) {
prev = et->largest;
dei.len = 0;
- /* we do not guarantee that the largest extent is cached all the time */
- __drop_largest_extent(inode, fofs);
+ /*
+ * drop largest extent before lookup, in case it's already
+ * been shrunk from extent tree
+ */
+ __drop_largest_extent(inode, fofs, len);
/* 1. lookup first extent node in range [fofs, fofs + len - 1] */
en = __lookup_extent_tree_ret(et, fofs, &prev_en, &next_en,
&insert_p, &insert_parent);
- if (!en) {
- if (next_en) {
- en = next_en;
- f2fs_bug_on(sbi, en->ei.fofs <= pos);
- pos = en->ei.fofs;
- } else {
- /*
- * skip searching in the tree since there is no
- * larger extent node in the cache.
- */
- goto update_extent;
- }
- }
+ if (!en)
+ en = next_en;
/* 2. invlidate all extent nodes in range [fofs, fofs + len - 1] */
- while (en) {
- struct rb_node *node;
+ while (en && en->ei.fofs < end) {
+ unsigned int org_end;
+ int parts = 0; /* # of parts current extent split into */
- if (pos >= end)
- break;
+ next_en = en1 = NULL;
dei = en->ei;
- en1 = en2 = NULL;
+ org_end = dei.fofs + dei.len;
+ f2fs_bug_on(sbi, pos >= org_end);
- node = rb_next(&en->rb_node);
+ if (pos > dei.fofs && pos - dei.fofs >= F2FS_MIN_EXTENT_LEN) {
+ en->ei.len = pos - en->ei.fofs;
+ prev_en = en;
+ parts = 1;
+ }
- /*
- * 2.1 there are four cases when we invalidate blkaddr in extent
- * node, |V: valid address, X: will be invalidated|
- */
- /* case#1, invalidate right part of extent node |VVVVVXXXXX| */
- if (pos > dei.fofs && end >= dei.fofs + dei.len) {
- en->ei.len = pos - dei.fofs;
-
- if (en->ei.len < F2FS_MIN_EXTENT_LEN) {
- __detach_extent_node(sbi, et, en);
- insert_p = NULL;
- insert_parent = NULL;
- goto update;
+ if (end < org_end && org_end - end >= F2FS_MIN_EXTENT_LEN) {
+ if (parts) {
+ set_extent_info(&ei, end,
+ end - dei.fofs + dei.blk,
+ org_end - end);
+ en1 = __insert_extent_tree(sbi, et, &ei,
+ NULL, NULL);
+ next_en = en1;
+ } else {
+ en->ei.fofs = end;
+ en->ei.blk += end - dei.fofs;
+ en->ei.len -= end - dei.fofs;
+ next_en = en;
}
-
- if (__is_extent_same(&dei, &et->largest))
- et->largest = en->ei;
- goto next;
+ parts++;
}
- /* case#2, invalidate left part of extent node |XXXXXVVVVV| */
- if (pos <= dei.fofs && end < dei.fofs + dei.len) {
- en->ei.fofs = end;
- en->ei.blk += end - dei.fofs;
- en->ei.len -= end - dei.fofs;
-
- if (en->ei.len < F2FS_MIN_EXTENT_LEN) {
- __detach_extent_node(sbi, et, en);
- insert_p = NULL;
- insert_parent = NULL;
- goto update;
- }
+ if (!next_en) {
+ struct rb_node *node = rb_next(&en->rb_node);
- if (__is_extent_same(&dei, &et->largest))
- et->largest = en->ei;
- goto next;
+ next_en = node ?
+ rb_entry(node, struct extent_node, rb_node)
+ : NULL;
}
- __detach_extent_node(sbi, et, en);
+ if (parts)
+ __try_update_largest_extent(et, en);
+ else
+ __detach_extent_node(sbi, et, en);
/*
- * if we remove node in rb-tree, our parent node pointer may
- * point the wrong place, discard them.
+ * if original extent is split into zero or two parts, extent
+ * tree has been altered by deletion or insertion, therefore
+ * invalidate pointers regard to tree.
*/
- insert_p = NULL;
- insert_parent = NULL;
-
- /* case#3, invalidate entire extent node |XXXXXXXXXX| */
- if (pos <= dei.fofs && end >= dei.fofs + dei.len) {
- if (__is_extent_same(&dei, &et->largest))
- et->largest.len = 0;
- goto update;
+ if (parts != 1) {
+ insert_p = NULL;
+ insert_parent = NULL;
}
- /*
- * case#4, invalidate data in the middle of extent node
- * |VVVXXXXVVV|
- */
- if (dei.len > F2FS_MIN_EXTENT_LEN) {
- unsigned int endofs;
-
- /* insert left part of split extent into cache */
- if (pos - dei.fofs >= F2FS_MIN_EXTENT_LEN) {
- set_extent_info(&ei, dei.fofs, dei.blk,
- pos - dei.fofs);
- en1 = __insert_extent_tree(sbi, et, &ei,
- NULL, NULL);
- }
-
- /* insert right part of split extent into cache */
- endofs = dei.fofs + dei.len;
- if (endofs - end >= F2FS_MIN_EXTENT_LEN) {
- set_extent_info(&ei, end,
- end - dei.fofs + dei.blk,
- endofs - end);
- en2 = __insert_extent_tree(sbi, et, &ei,
- NULL, NULL);
- }
- }
-update:
- /* 2.2 update in global extent list */
+ /* update in global extent list */
spin_lock(&sbi->extent_lock);
- if (en && !list_empty(&en->list))
+ if (!parts && !list_empty(&en->list))
list_del(&en->list);
if (en1)
list_add_tail(&en1->list, &sbi->extent_list);
- if (en2)
- list_add_tail(&en2->list, &sbi->extent_list);
spin_unlock(&sbi->extent_lock);
- /* 2.3 release extent node */
- if (en)
+ /* release extent node */
+ if (!parts)
kmem_cache_free(extent_node_slab, en);
-next:
- en = node ? rb_entry(node, struct extent_node, rb_node) : NULL;
- next_en = en;
- if (en)
- pos = en->ei.fofs;
+
+ en = next_en;
}
-update_extent:
/* 3. update extent in extent cache */
if (blkaddr) {
struct extent_node *den = NULL;
set_extent_info(&ei, fofs, blkaddr, len);
- en3 = __try_merge_extent_node(sbi, et, &ei, &den,
+ en1 = __try_merge_extent_node(sbi, et, &ei, &den,
prev_en, next_en);
- if (!en3)
- en3 = __insert_extent_tree(sbi, et, &ei,
+ if (!en1)
+ en1 = __insert_extent_tree(sbi, et, &ei,
insert_p, insert_parent);
/* give up extent_cache, if split and small updates happen */
}
spin_lock(&sbi->extent_lock);
- if (en3) {
- if (list_empty(&en3->list))
- list_add_tail(&en3->list, &sbi->extent_list);
+ if (en1) {
+ if (list_empty(&en1->list))
+ list_add_tail(&en1->list, &sbi->extent_list);
else
- list_move_tail(&en3->list, &sbi->extent_list);
+ list_move_tail(&en1->list, &sbi->extent_list);
}
if (den && !list_empty(&den->list))
list_del(&den->list);
}
spin_unlock(&sbi->extent_lock);
+ /*
+ * reset ino for searching victims from beginning of global extent tree.
+ */
+ ino = F2FS_ROOT_INO(sbi);
+
while ((found = radix_tree_gang_lookup(root,
(void **)treevec, ino, EXT_TREE_VEC_SIZE))) {
unsigned i;
#include <linux/magic.h>
#include <linux/kobject.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include <linux/bio.h>
#ifdef CONFIG_F2FS_CHECK_FS
#define F2FS_MOUNT_NOBARRIER 0x00000800
#define F2FS_MOUNT_FASTBOOT 0x00001000
#define F2FS_MOUNT_EXTENT_CACHE 0x00002000
+#define F2FS_MOUNT_FORCE_FG_GC 0x00004000
#define clear_opt(sbi, option) (sbi->mount_opt.opt &= ~F2FS_MOUNT_##option)
#define set_opt(sbi, option) (sbi->mount_opt.opt |= F2FS_MOUNT_##option)
(SM_I(sbi)->trim_sections * (sbi)->segs_per_sec)
#define BATCHED_TRIM_BLOCKS(sbi) \
(BATCHED_TRIM_SEGMENTS(sbi) << (sbi)->log_blocks_per_seg)
+#define DEF_CP_INTERVAL 60 /* 60 secs */
struct cp_control {
int reason;
#define F2FS_IOC_RELEASE_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 4)
#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
#define F2FS_IOC_GARBAGE_COLLECT _IO(F2FS_IOCTL_MAGIC, 6)
+#define F2FS_IOC_WRITE_CHECKPOINT _IO(F2FS_IOCTL_MAGIC, 7)
#define F2FS_IOC_SET_ENCRYPTION_POLICY \
_IOR('f', 19, struct f2fs_encryption_policy)
#define F2FS_GOING_DOWN_FULLSYNC 0x0 /* going down with full sync */
#define F2FS_GOING_DOWN_METASYNC 0x1 /* going down with metadata */
#define F2FS_GOING_DOWN_NOSYNC 0x2 /* going down */
+#define F2FS_GOING_DOWN_METAFLUSH 0x3 /* going down with meta flush */
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
/*
return __is_extent_mergeable(cur, front);
}
+static inline void __try_update_largest_extent(struct extent_tree *et,
+ struct extent_node *en)
+{
+ if (en->ei.len > et->largest.len)
+ et->largest = en->ei;
+}
+
struct f2fs_nm_info {
block_t nat_blkaddr; /* base disk address of NAT */
nid_t max_nid; /* maximum possible node ids */
nid_t available_nids; /* maximum available node ids */
nid_t next_scan_nid; /* the next nid to be scanned */
unsigned int ram_thresh; /* control the memory footprint */
+ unsigned int ra_nid_pages; /* # of nid pages to be readaheaded */
/* NAT cache management */
struct radix_tree_root nat_root;/* root of the nat entry cache */
struct rw_semaphore node_write; /* locking node writes */
struct mutex writepages; /* mutex for writepages() */
wait_queue_head_t cp_wait;
+ long cp_expires, cp_interval; /* next expected periodic cp */
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
unsigned int segment_count[2]; /* # of allocated segments */
unsigned int block_count[2]; /* # of allocated blocks */
atomic_t inplace_count; /* # of inplace update */
- atomic_t total_hit_ext; /* # of lookup extent cache */
- atomic_t read_hit_rbtree; /* # of hit rbtree extent node */
- atomic_t read_hit_largest; /* # of hit largest extent node */
- atomic_t read_hit_cached; /* # of hit cached extent node */
+ atomic64_t total_hit_ext; /* # of lookup extent cache */
+ atomic64_t read_hit_rbtree; /* # of hit rbtree extent node */
+ atomic64_t read_hit_largest; /* # of hit largest extent node */
+ atomic64_t read_hit_cached; /* # of hit cached extent node */
atomic_t inline_xattr; /* # of inline_xattr inodes */
atomic_t inline_inode; /* # of inline_data inodes */
atomic_t inline_dir; /* # of inline_dentry inodes */
return sbi->total_valid_inode_count;
}
+static inline struct page *f2fs_grab_cache_page(struct address_space *mapping,
+ pgoff_t index, bool for_write)
+{
+ if (!for_write)
+ return grab_cache_page(mapping, index);
+ return grab_cache_page_write_begin(mapping, index, AOP_FLAG_NOFS);
+}
+
+static inline void f2fs_copy_page(struct page *src, struct page *dst)
+{
+ char *src_kaddr = kmap(src);
+ char *dst_kaddr = kmap(dst);
+
+ memcpy(dst_kaddr, src_kaddr, PAGE_SIZE);
+ kunmap(dst);
+ kunmap(src);
+}
+
static inline void f2fs_put_page(struct page *page, int unlock)
{
if (!page)
return S_ISREG(mode);
}
+static inline void *f2fs_kvmalloc(size_t size, gfp_t flags)
+{
+ void *ret;
+
+ ret = kmalloc(size, flags | __GFP_NOWARN);
+ if (!ret)
+ ret = __vmalloc(size, flags, PAGE_KERNEL);
+ return ret;
+}
+
+static inline void *f2fs_kvzalloc(size_t size, gfp_t flags)
+{
+ void *ret;
+
+ ret = kzalloc(size, flags | __GFP_NOWARN);
+ if (!ret)
+ ret = __vmalloc(size, flags | __GFP_ZERO, PAGE_KERNEL);
+ return ret;
+}
+
#define get_inode_mode(i) \
((is_inode_flag_set(F2FS_I(i), FI_ACL_MODE)) ? \
(F2FS_I(i)->i_acl_mode) : ((i)->i_mode))
int create_flush_cmd_control(struct f2fs_sb_info *);
void destroy_flush_cmd_control(struct f2fs_sb_info *);
void invalidate_blocks(struct f2fs_sb_info *, block_t);
+bool is_checkpointed_data(struct f2fs_sb_info *, block_t);
void refresh_sit_entry(struct f2fs_sb_info *, block_t, block_t);
void clear_prefree_segments(struct f2fs_sb_info *, struct cp_control *);
void release_discard_addrs(struct f2fs_sb_info *);
void allocate_data_block(struct f2fs_sb_info *, struct page *,
block_t, block_t *, struct f2fs_summary *, int);
void f2fs_wait_on_page_writeback(struct page *, enum page_type);
+void f2fs_wait_on_encrypted_page_writeback(struct f2fs_sb_info *, block_t);
void write_data_summaries(struct f2fs_sb_info *, block_t);
void write_node_summaries(struct f2fs_sb_info *, block_t);
int lookup_journal_in_cursum(struct f2fs_summary_block *,
*/
struct page *grab_meta_page(struct f2fs_sb_info *, pgoff_t);
struct page *get_meta_page(struct f2fs_sb_info *, pgoff_t);
+struct page *get_tmp_page(struct f2fs_sb_info *, pgoff_t);
bool is_valid_blkaddr(struct f2fs_sb_info *, block_t, int);
-int ra_meta_pages(struct f2fs_sb_info *, block_t, int, int);
+int ra_meta_pages(struct f2fs_sb_info *, block_t, int, int, bool);
void ra_meta_pages_cond(struct f2fs_sb_info *, pgoff_t);
long sync_meta_pages(struct f2fs_sb_info *, enum page_type, long);
void add_dirty_inode(struct f2fs_sb_info *, nid_t, int type);
int reserve_new_block(struct dnode_of_data *);
int f2fs_get_block(struct dnode_of_data *, pgoff_t);
int f2fs_reserve_block(struct dnode_of_data *, pgoff_t);
-struct page *get_read_data_page(struct inode *, pgoff_t, int);
+struct page *get_read_data_page(struct inode *, pgoff_t, int, bool);
struct page *find_data_page(struct inode *, pgoff_t);
-struct page *get_lock_data_page(struct inode *, pgoff_t);
+struct page *get_lock_data_page(struct inode *, pgoff_t, bool);
struct page *get_new_data_page(struct inode *, struct page *, pgoff_t, bool);
int do_write_data_page(struct f2fs_io_info *);
int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *, u64, u64);
int start_gc_thread(struct f2fs_sb_info *);
void stop_gc_thread(struct f2fs_sb_info *);
block_t start_bidx_of_node(unsigned int, struct f2fs_inode_info *);
-int f2fs_gc(struct f2fs_sb_info *);
+int f2fs_gc(struct f2fs_sb_info *, bool);
void build_gc_manager(struct f2fs_sb_info *);
/*
struct f2fs_sb_info *sbi;
int all_area_segs, sit_area_segs, nat_area_segs, ssa_area_segs;
int main_area_segs, main_area_sections, main_area_zones;
- int hit_largest, hit_cached, hit_rbtree, hit_total, total_ext;
+ unsigned long long hit_largest, hit_cached, hit_rbtree;
+ unsigned long long hit_total, total_ext;
int ext_tree, ext_node;
int ndirty_node, ndirty_dent, ndirty_dirs, ndirty_meta;
int nats, dirty_nats, sits, dirty_sits, fnids;
unsigned int segment_count[2];
unsigned int block_count[2];
unsigned int inplace_count;
- unsigned base_mem, cache_mem, page_mem;
+ unsigned long long base_mem, cache_mem, page_mem;
};
static inline struct f2fs_stat_info *F2FS_STAT(struct f2fs_sb_info *sbi)
#define stat_inc_bggc_count(sbi) ((sbi)->bg_gc++)
#define stat_inc_dirty_dir(sbi) ((sbi)->n_dirty_dirs++)
#define stat_dec_dirty_dir(sbi) ((sbi)->n_dirty_dirs--)
-#define stat_inc_total_hit(sbi) (atomic_inc(&(sbi)->total_hit_ext))
-#define stat_inc_rbtree_node_hit(sbi) (atomic_inc(&(sbi)->read_hit_rbtree))
-#define stat_inc_largest_node_hit(sbi) (atomic_inc(&(sbi)->read_hit_largest))
-#define stat_inc_cached_node_hit(sbi) (atomic_inc(&(sbi)->read_hit_cached))
+#define stat_inc_total_hit(sbi) (atomic64_inc(&(sbi)->total_hit_ext))
+#define stat_inc_rbtree_node_hit(sbi) (atomic64_inc(&(sbi)->read_hit_rbtree))
+#define stat_inc_largest_node_hit(sbi) (atomic64_inc(&(sbi)->read_hit_largest))
+#define stat_inc_cached_node_hit(sbi) (atomic64_inc(&(sbi)->read_hit_cached))
#define stat_inc_inline_xattr(inode) \
do { \
if (f2fs_has_inline_xattr(inode)) \
bool f2fs_empty_inline_dir(struct inode *);
int f2fs_read_inline_dir(struct file *, struct dir_context *,
struct f2fs_str *);
+int f2fs_inline_data_fiemap(struct inode *,
+ struct fiemap_extent_info *, __u64, __u64);
/*
* shrinker.c
goto mapped;
/* page is wholly or partially inside EOF */
- if (((page->index + 1) << PAGE_CACHE_SHIFT) > i_size_read(inode)) {
+ if (((loff_t)(page->index + 1) << PAGE_CACHE_SHIFT) >
+ i_size_read(inode)) {
unsigned offset;
offset = i_size_read(inode) & ~PAGE_CACHE_MASK;
zero_user_segment(page, offset, PAGE_CACHE_SIZE);
mapped:
/* fill the page */
f2fs_wait_on_page_writeback(page, DATA);
+
+ /* wait for GCed encrypted page writeback */
+ if (f2fs_encrypted_inode(inode) && S_ISREG(inode->i_mode))
+ f2fs_wait_on_encrypted_page_writeback(sbi, dn.data_blkaddr);
+
/* if gced page is attached, don't write to cold segment */
clear_cold_data(page);
out:
dirty = __get_first_dirty_index(inode->i_mapping, pgofs, whence);
- for (; data_ofs < isize; data_ofs = pgofs << PAGE_CACHE_SHIFT) {
+ for (; data_ofs < isize; data_ofs = (loff_t)pgofs << PAGE_CACHE_SHIFT) {
set_new_dnode(&dn, inode, NULL, NULL, 0);
err = get_dnode_of_data(&dn, pgofs, LOOKUP_NODE_RA);
if (err && err != -ENOENT) {
return 0;
if (cache_only) {
- page = grab_cache_page(mapping, index);
+ page = f2fs_grab_cache_page(mapping, index, false);
if (page && PageUptodate(page))
goto truncate_out;
f2fs_put_page(page, 1);
return 0;
}
- page = get_lock_data_page(inode, index);
+ page = get_lock_data_page(inode, index, true);
if (IS_ERR(page))
return 0;
truncate_out:
* larger than i_size.
*/
truncate_setsize(inode, attr->ia_size);
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
}
}
int truncate_hole(struct inode *inode, pgoff_t pg_start, pgoff_t pg_end)
{
- pgoff_t index;
int err;
- for (index = pg_start; index < pg_end; index++) {
+ while (pg_start < pg_end) {
struct dnode_of_data dn;
+ pgoff_t end_offset, count;
set_new_dnode(&dn, inode, NULL, NULL, 0);
- err = get_dnode_of_data(&dn, index, LOOKUP_NODE);
+ err = get_dnode_of_data(&dn, pg_start, LOOKUP_NODE);
if (err) {
- if (err == -ENOENT)
+ if (err == -ENOENT) {
+ pg_start++;
continue;
+ }
return err;
}
- if (dn.data_blkaddr != NULL_ADDR)
- truncate_data_blocks_range(&dn, 1);
+ end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
+ count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
+
+ f2fs_bug_on(F2FS_I_SB(inode), count == 0 || count > end_offset);
+
+ truncate_data_blocks_range(&dn, count);
f2fs_put_dnode(&dn);
+
+ pg_start += count;
}
return 0;
}
loff_t off_start, off_end;
int ret = 0;
- if (!S_ISREG(inode->i_mode))
- return -EOPNOTSUPP;
-
if (f2fs_has_inline_data(inode)) {
ret = f2fs_convert_inline_inode(inode);
if (ret)
f2fs_balance_fs(sbi);
- blk_start = pg_start << PAGE_CACHE_SHIFT;
- blk_end = pg_end << PAGE_CACHE_SHIFT;
+ blk_start = (loff_t)pg_start << PAGE_CACHE_SHIFT;
+ blk_end = (loff_t)pg_end << PAGE_CACHE_SHIFT;
truncate_inode_pages_range(mapping, blk_start,
blk_end - 1);
return ret;
}
-static int f2fs_do_collapse(struct inode *inode, pgoff_t start, pgoff_t end)
+static int __exchange_data_block(struct inode *inode, pgoff_t src,
+ pgoff_t dst, bool full)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct dnode_of_data dn;
- pgoff_t nrpages = (i_size_read(inode) + PAGE_SIZE - 1) / PAGE_SIZE;
- int ret = 0;
-
- for (; end < nrpages; start++, end++) {
- block_t new_addr, old_addr;
-
- f2fs_lock_op(sbi);
+ block_t new_addr;
+ bool do_replace = false;
+ int ret;
- set_new_dnode(&dn, inode, NULL, NULL, 0);
- ret = get_dnode_of_data(&dn, end, LOOKUP_NODE_RA);
- if (ret && ret != -ENOENT) {
- goto out;
- } else if (ret == -ENOENT) {
- new_addr = NULL_ADDR;
- } else {
- new_addr = dn.data_blkaddr;
- truncate_data_blocks_range(&dn, 1);
- f2fs_put_dnode(&dn);
+ set_new_dnode(&dn, inode, NULL, NULL, 0);
+ ret = get_dnode_of_data(&dn, src, LOOKUP_NODE_RA);
+ if (ret && ret != -ENOENT) {
+ return ret;
+ } else if (ret == -ENOENT) {
+ new_addr = NULL_ADDR;
+ } else {
+ new_addr = dn.data_blkaddr;
+ if (!is_checkpointed_data(sbi, new_addr)) {
+ dn.data_blkaddr = NULL_ADDR;
+ /* do not invalidate this block address */
+ set_data_blkaddr(&dn);
+ f2fs_update_extent_cache(&dn);
+ do_replace = true;
}
+ f2fs_put_dnode(&dn);
+ }
- if (new_addr == NULL_ADDR) {
- set_new_dnode(&dn, inode, NULL, NULL, 0);
- ret = get_dnode_of_data(&dn, start, LOOKUP_NODE_RA);
- if (ret && ret != -ENOENT) {
- goto out;
- } else if (ret == -ENOENT) {
- f2fs_unlock_op(sbi);
- continue;
- }
+ if (new_addr == NULL_ADDR)
+ return full ? truncate_hole(inode, dst, dst + 1) : 0;
- if (dn.data_blkaddr == NULL_ADDR) {
- f2fs_put_dnode(&dn);
- f2fs_unlock_op(sbi);
- continue;
- } else {
- truncate_data_blocks_range(&dn, 1);
- }
+ if (do_replace) {
+ struct page *ipage = get_node_page(sbi, inode->i_ino);
+ struct node_info ni;
- f2fs_put_dnode(&dn);
- } else {
- struct page *ipage;
+ if (IS_ERR(ipage)) {
+ ret = PTR_ERR(ipage);
+ goto err_out;
+ }
- ipage = get_node_page(sbi, inode->i_ino);
- if (IS_ERR(ipage)) {
- ret = PTR_ERR(ipage);
- goto out;
- }
+ set_new_dnode(&dn, inode, ipage, NULL, 0);
+ ret = f2fs_reserve_block(&dn, dst);
+ if (ret)
+ goto err_out;
- set_new_dnode(&dn, inode, ipage, NULL, 0);
- ret = f2fs_reserve_block(&dn, start);
- if (ret)
- goto out;
+ truncate_data_blocks_range(&dn, 1);
- old_addr = dn.data_blkaddr;
- if (old_addr != NEW_ADDR && new_addr == NEW_ADDR) {
- dn.data_blkaddr = NULL_ADDR;
- f2fs_update_extent_cache(&dn);
- invalidate_blocks(sbi, old_addr);
+ get_node_info(sbi, dn.nid, &ni);
+ f2fs_replace_block(sbi, &dn, dn.data_blkaddr, new_addr,
+ ni.version, true);
+ f2fs_put_dnode(&dn);
+ } else {
+ struct page *psrc, *pdst;
+
+ psrc = get_lock_data_page(inode, src, true);
+ if (IS_ERR(psrc))
+ return PTR_ERR(psrc);
+ pdst = get_new_data_page(inode, NULL, dst, false);
+ if (IS_ERR(pdst)) {
+ f2fs_put_page(psrc, 1);
+ return PTR_ERR(pdst);
+ }
+ f2fs_copy_page(psrc, pdst);
+ set_page_dirty(pdst);
+ f2fs_put_page(pdst, 1);
+ f2fs_put_page(psrc, 1);
- dn.data_blkaddr = new_addr;
- set_data_blkaddr(&dn);
- } else if (new_addr != NEW_ADDR) {
- struct node_info ni;
+ return truncate_hole(inode, src, src + 1);
+ }
+ return 0;
- get_node_info(sbi, dn.nid, &ni);
- f2fs_replace_block(sbi, &dn, old_addr, new_addr,
- ni.version, true);
- }
+err_out:
+ if (!get_dnode_of_data(&dn, src, LOOKUP_NODE)) {
+ dn.data_blkaddr = new_addr;
+ set_data_blkaddr(&dn);
+ f2fs_update_extent_cache(&dn);
+ f2fs_put_dnode(&dn);
+ }
+ return ret;
+}
- f2fs_put_dnode(&dn);
- }
+static int f2fs_do_collapse(struct inode *inode, pgoff_t start, pgoff_t end)
+{
+ struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
+ pgoff_t nrpages = (i_size_read(inode) + PAGE_SIZE - 1) / PAGE_SIZE;
+ int ret = 0;
+
+ for (; end < nrpages; start++, end++) {
+ f2fs_balance_fs(sbi);
+ f2fs_lock_op(sbi);
+ ret = __exchange_data_block(inode, end, start, true);
f2fs_unlock_op(sbi);
+ if (ret)
+ break;
}
- return 0;
-out:
- f2fs_unlock_op(sbi);
return ret;
}
loff_t new_size;
int ret;
- if (!S_ISREG(inode->i_mode))
- return -EINVAL;
-
if (offset + len >= i_size_read(inode))
return -EINVAL;
if (ret)
return ret;
+ /* write out all moved pages, if possible */
+ filemap_write_and_wait_range(inode->i_mapping, offset, LLONG_MAX);
+ truncate_pagecache(inode, offset);
+
new_size = i_size_read(inode) - len;
+ truncate_pagecache(inode, new_size);
ret = truncate_blocks(inode, new_size, true);
if (!ret)
loff_t off_start, off_end;
int ret = 0;
- if (!S_ISREG(inode->i_mode))
- return -EINVAL;
-
ret = inode_newsize_ok(inode, (len + offset));
if (ret)
return ret;
return ret;
new_size = max_t(loff_t, new_size,
- pg_start << PAGE_CACHE_SHIFT);
+ (loff_t)pg_start << PAGE_CACHE_SHIFT);
}
for (index = pg_start; index < pg_end; index++) {
f2fs_unlock_op(sbi);
new_size = max_t(loff_t, new_size,
- (index + 1) << PAGE_CACHE_SHIFT);
+ (loff_t)(index + 1) << PAGE_CACHE_SHIFT);
}
if (off_end) {
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
pgoff_t pg_start, pg_end, delta, nrpages, idx;
loff_t new_size;
- int ret;
-
- if (!S_ISREG(inode->i_mode))
- return -EINVAL;
+ int ret = 0;
new_size = i_size_read(inode) + len;
if (new_size > inode->i_sb->s_maxbytes)
nrpages = (i_size_read(inode) + PAGE_SIZE - 1) / PAGE_SIZE;
for (idx = nrpages - 1; idx >= pg_start && idx != -1; idx--) {
- struct dnode_of_data dn;
- struct page *ipage;
- block_t new_addr, old_addr;
-
f2fs_lock_op(sbi);
-
- set_new_dnode(&dn, inode, NULL, NULL, 0);
- ret = get_dnode_of_data(&dn, idx, LOOKUP_NODE_RA);
- if (ret && ret != -ENOENT) {
- goto out;
- } else if (ret == -ENOENT) {
- goto next;
- } else if (dn.data_blkaddr == NULL_ADDR) {
- f2fs_put_dnode(&dn);
- goto next;
- } else {
- new_addr = dn.data_blkaddr;
- truncate_data_blocks_range(&dn, 1);
- f2fs_put_dnode(&dn);
- }
-
- ipage = get_node_page(sbi, inode->i_ino);
- if (IS_ERR(ipage)) {
- ret = PTR_ERR(ipage);
- goto out;
- }
-
- set_new_dnode(&dn, inode, ipage, NULL, 0);
- ret = f2fs_reserve_block(&dn, idx + delta);
- if (ret)
- goto out;
-
- old_addr = dn.data_blkaddr;
- f2fs_bug_on(sbi, old_addr != NEW_ADDR);
-
- if (new_addr != NEW_ADDR) {
- struct node_info ni;
-
- get_node_info(sbi, dn.nid, &ni);
- f2fs_replace_block(sbi, &dn, old_addr, new_addr,
- ni.version, true);
- }
- f2fs_put_dnode(&dn);
-next:
+ ret = __exchange_data_block(inode, idx, idx + delta, false);
f2fs_unlock_op(sbi);
+ if (ret)
+ break;
}
- i_size_write(inode, new_size);
- return 0;
-out:
- f2fs_unlock_op(sbi);
+ /* write out all moved pages, if possible */
+ filemap_write_and_wait_range(inode->i_mapping, offset, LLONG_MAX);
+ truncate_pagecache(inode, offset);
+
+ if (!ret)
+ i_size_write(inode, new_size);
return ret;
}
if (pg_start == pg_end)
new_size = offset + len;
else if (index == pg_start && off_start)
- new_size = (index + 1) << PAGE_CACHE_SHIFT;
+ new_size = (loff_t)(index + 1) << PAGE_CACHE_SHIFT;
else if (index == pg_end)
- new_size = (index << PAGE_CACHE_SHIFT) + off_end;
+ new_size = ((loff_t)index << PAGE_CACHE_SHIFT) +
+ off_end;
else
new_size += PAGE_CACHE_SIZE;
}
struct inode *inode = file_inode(file);
long ret = 0;
+ /* f2fs only support ->fallocate for regular file */
+ if (!S_ISREG(inode->i_mode))
+ return -EINVAL;
+
if (f2fs_encrypted_inode(inode) &&
(mode & (FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE)))
return -EOPNOTSUPP;
if (!f2fs_is_first_block_written(inode))
return truncate_partial_data_page(inode, 0, true);
- punch_hole(inode, 0, F2FS_BLKSIZE);
- return 0;
+ return punch_hole(inode, 0, F2FS_BLKSIZE);
}
static int f2fs_ioc_abort_volatile_write(struct file *filp)
case F2FS_GOING_DOWN_NOSYNC:
f2fs_stop_checkpoint(sbi);
break;
+ case F2FS_GOING_DOWN_METAFLUSH:
+ sync_meta_pages(sbi, META, LONG_MAX);
+ f2fs_stop_checkpoint(sbi);
+ break;
default:
return -EINVAL;
}
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
- __u32 i, count;
+ __u32 sync;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (get_user(count, (__u32 __user *)arg))
+ if (get_user(sync, (__u32 __user *)arg))
return -EFAULT;
- if (!count || count > F2FS_BATCH_GC_MAX_NUM)
- return -EINVAL;
+ if (f2fs_readonly(sbi->sb))
+ return -EROFS;
- for (i = 0; i < count; i++) {
+ if (!sync) {
if (!mutex_trylock(&sbi->gc_mutex))
- break;
-
- if (f2fs_gc(sbi))
- break;
+ return -EBUSY;
+ } else {
+ mutex_lock(&sbi->gc_mutex);
}
- if (put_user(i, (__u32 __user *)arg))
- return -EFAULT;
+ return f2fs_gc(sbi, sync);
+}
+
+static int f2fs_ioc_write_checkpoint(struct file *filp, unsigned long arg)
+{
+ struct inode *inode = file_inode(filp);
+ struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
+ struct cp_control cpc;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (f2fs_readonly(sbi->sb))
+ return -EROFS;
+
+ cpc.reason = __get_cp_reason(sbi);
+
+ mutex_lock(&sbi->gc_mutex);
+ write_checkpoint(sbi, &cpc);
+ mutex_unlock(&sbi->gc_mutex);
return 0;
}
return f2fs_ioc_get_encryption_pwsalt(filp, arg);
case F2FS_IOC_GARBAGE_COLLECT:
return f2fs_ioc_gc(filp, arg);
+ case F2FS_IOC_WRITE_CHECKPOINT:
+ return f2fs_ioc_write_checkpoint(filp, arg);
default:
return -ENOTTY;
}
stat_inc_bggc_count(sbi);
/* if return value is not zero, no victim was selected */
- if (f2fs_gc(sbi))
+ if (f2fs_gc(sbi, test_opt(sbi, FORCE_FG_GC)))
wait_ms = gc_th->no_gc_sleep_time;
+ trace_f2fs_background_gc(sbi->sb, wait_ms,
+ prefree_segments(sbi), free_segments(sbi));
+
/* balancing f2fs's metadata periodically */
f2fs_balance_fs_bg(sbi);
struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
struct victim_sel_policy p;
unsigned int secno, max_cost;
+ unsigned int last_segment = MAIN_SEGS(sbi);
int nsearched = 0;
mutex_lock(&dirty_i->seglist_lock);
p.min_segno = NULL_SEGNO;
p.min_cost = max_cost = get_max_cost(sbi, &p);
+ if (p.max_search == 0)
+ goto out;
+
if (p.alloc_mode == LFS && gc_type == FG_GC) {
p.min_segno = check_bg_victims(sbi);
if (p.min_segno != NULL_SEGNO)
unsigned long cost;
unsigned int segno;
- segno = find_next_bit(p.dirty_segmap, MAIN_SEGS(sbi), p.offset);
- if (segno >= MAIN_SEGS(sbi)) {
+ segno = find_next_bit(p.dirty_segmap, last_segment, p.offset);
+ if (segno >= last_segment) {
if (sbi->last_victim[p.gc_mode]) {
+ last_segment = sbi->last_victim[p.gc_mode];
sbi->last_victim[p.gc_mode] = 0;
p.offset = 0;
continue;
sbi->cur_victim_sec,
prefree_segments(sbi), free_segments(sbi));
}
+out:
mutex_unlock(&dirty_i->seglist_lock);
return (p.min_segno == NULL_SEGNO) ? 0 : 1;
int err;
/* do not read out */
- page = grab_cache_page(inode->i_mapping, bidx);
+ page = f2fs_grab_cache_page(inode->i_mapping, bidx, false);
if (!page)
return;
if (err)
goto out;
- if (unlikely(dn.data_blkaddr == NULL_ADDR))
+ if (unlikely(dn.data_blkaddr == NULL_ADDR)) {
+ ClearPageUptodate(page);
goto put_out;
+ }
+
+ /*
+ * don't cache encrypted data into meta inode until previous dirty
+ * data were writebacked to avoid racing between GC and flush.
+ */
+ f2fs_wait_on_page_writeback(page, DATA);
get_node_info(fio.sbi, dn.nid, &ni);
set_summary(&sum, dn.nid, dn.ofs_in_node, ni.version);
goto put_page_out;
set_page_dirty(fio.encrypted_page);
- f2fs_wait_on_page_writeback(fio.encrypted_page, META);
+ f2fs_wait_on_page_writeback(fio.encrypted_page, DATA);
if (clear_page_dirty_for_io(fio.encrypted_page))
dec_page_count(fio.sbi, F2FS_DIRTY_META);
{
struct page *page;
- page = get_lock_data_page(inode, bidx);
+ page = get_lock_data_page(inode, bidx, true);
if (IS_ERR(page))
return;
start_bidx = start_bidx_of_node(nofs, F2FS_I(inode));
data_page = get_read_data_page(inode,
- start_bidx + ofs_in_node, READA);
+ start_bidx + ofs_in_node, READA, true);
if (IS_ERR(data_page)) {
iput(inode);
continue;
return nfree;
}
-int f2fs_gc(struct f2fs_sb_info *sbi)
+int f2fs_gc(struct f2fs_sb_info *sbi, bool sync)
{
- unsigned int segno = NULL_SEGNO;
- unsigned int i;
- int gc_type = BG_GC;
- int nfree = 0;
- int ret = -1;
+ unsigned int segno, i;
+ int gc_type = sync ? FG_GC : BG_GC;
+ int sec_freed = 0;
+ int ret = -EINVAL;
struct cp_control cpc;
struct gc_inode_list gc_list = {
.ilist = LIST_HEAD_INIT(gc_list.ilist),
cpc.reason = __get_cp_reason(sbi);
gc_more:
+ segno = NULL_SEGNO;
+
if (unlikely(!(sbi->sb->s_flags & MS_ACTIVE)))
goto stop;
if (unlikely(f2fs_cp_error(sbi)))
goto stop;
- if (gc_type == BG_GC && has_not_enough_free_secs(sbi, nfree)) {
+ if (gc_type == BG_GC && has_not_enough_free_secs(sbi, sec_freed)) {
gc_type = FG_GC;
if (__get_victim(sbi, &segno, gc_type) || prefree_segments(sbi))
write_checkpoint(sbi, &cpc);
/* readahead multi ssa blocks those have contiguous address */
if (sbi->segs_per_sec > 1)
ra_meta_pages(sbi, GET_SUM_BLOCK(sbi, segno), sbi->segs_per_sec,
- META_SSA);
+ META_SSA, true);
- for (i = 0; i < sbi->segs_per_sec; i++)
- nfree += do_garbage_collect(sbi, segno + i, &gc_list, gc_type);
+ for (i = 0; i < sbi->segs_per_sec; i++) {
+ /*
+ * for FG_GC case, halt gcing left segments once failed one
+ * of segments in selected section to avoid long latency.
+ */
+ if (!do_garbage_collect(sbi, segno + i, &gc_list, gc_type) &&
+ gc_type == FG_GC)
+ break;
+ }
+
+ if (i == sbi->segs_per_sec && gc_type == FG_GC)
+ sec_freed++;
if (gc_type == FG_GC)
sbi->cur_victim_sec = NULL_SEGNO;
- if (has_not_enough_free_secs(sbi, nfree))
- goto gc_more;
+ if (!sync) {
+ if (has_not_enough_free_secs(sbi, sec_freed))
+ goto gc_more;
- if (gc_type == FG_GC)
- write_checkpoint(sbi, &cpc);
+ if (gc_type == FG_GC)
+ write_checkpoint(sbi, &cpc);
+ }
stop:
mutex_unlock(&sbi->gc_mutex);
put_gc_inode(&gc_list);
+
+ if (sync)
+ ret = sec_freed ? 0 : -EAGAIN;
return ret;
}
#define LIMIT_INVALID_BLOCK 40 /* percentage over total user space */
#define LIMIT_FREE_BLOCK 40 /* percentage over invalid + free space */
-/*
- * with this macro, we can control the max time we do garbage collection,
- * when user triggers batch mode gc by ioctl.
- */
-#define F2FS_BATCH_GC_MAX_NUM 16
-
/* Search max. number of dirty segments to select a victim segment */
#define DEF_MAX_VICTIM_SEARCH 4096 /* covers 8GB */
#include <linux/f2fs_fs.h>
#include "f2fs.h"
+#include "node.h"
bool f2fs_may_inline_data(struct inode *inode)
{
if (f2fs_has_inline_data(inode)) {
ipage = get_node_page(sbi, inode->i_ino);
f2fs_bug_on(sbi, IS_ERR(ipage));
- truncate_inline_inode(ipage, 0);
+ if (!truncate_inline_inode(ipage, 0))
+ return false;
f2fs_clear_inline_inode(inode);
update_inode(inode, ipage);
f2fs_put_page(ipage, 1);
} else if (ri && (ri->i_inline & F2FS_INLINE_DATA)) {
- truncate_blocks(inode, 0, false);
+ if (truncate_blocks(inode, 0, false))
+ return false;
goto process_inline;
}
return false;
f2fs_put_page(ipage, 1);
return 0;
}
+
+int f2fs_inline_data_fiemap(struct inode *inode,
+ struct fiemap_extent_info *fieinfo, __u64 start, __u64 len)
+{
+ __u64 byteaddr, ilen;
+ __u32 flags = FIEMAP_EXTENT_DATA_INLINE | FIEMAP_EXTENT_NOT_ALIGNED |
+ FIEMAP_EXTENT_LAST;
+ struct node_info ni;
+ struct page *ipage;
+ int err = 0;
+
+ ipage = get_node_page(F2FS_I_SB(inode), inode->i_ino);
+ if (IS_ERR(ipage))
+ return PTR_ERR(ipage);
+
+ if (!f2fs_has_inline_data(inode)) {
+ err = -EAGAIN;
+ goto out;
+ }
+
+ ilen = min_t(size_t, MAX_INLINE_DATA, i_size_read(inode));
+ if (start >= ilen)
+ goto out;
+ if (start + len < ilen)
+ ilen = start + len;
+ ilen -= start;
+
+ get_node_info(F2FS_I_SB(inode), inode->i_ino, &ni);
+ byteaddr = (__u64)ni.blk_addr << inode->i_sb->s_blocksize_bits;
+ byteaddr += (char *)inline_data_addr(ipage) - (char *)F2FS_INODE(ipage);
+ err = fiemap_fill_next_extent(fieinfo, start, byteaddr, ilen, flags);
+out:
+ f2fs_put_page(ipage, 1);
+ return err;
+}
return 0;
/*
- * We need to lock here to prevent from producing dirty node pages
+ * We need to balance fs here to prevent from producing dirty node pages
* during the urgent cleaning time when runing out of free sections.
*/
- f2fs_lock_op(sbi);
update_inode_page(inode);
- f2fs_unlock_op(sbi);
-
- if (wbc)
- f2fs_balance_fs(sbi);
+ f2fs_balance_fs(sbi);
return 0;
}
/* Symlink is encrypted */
sd = (struct f2fs_encrypted_symlink_data *)caddr;
- cstr.name = sd->encrypted_path;
cstr.len = le16_to_cpu(sd->len);
+ cstr.name = kmalloc(cstr.len, GFP_NOFS);
+ if (!cstr.name) {
+ res = -ENOMEM;
+ goto errout;
+ }
+ memcpy(cstr.name, sd->encrypted_path, cstr.len);
/* this is broken symlink case */
if (cstr.name[0] == 0 && cstr.len == 0) {
if (res < 0)
goto errout;
+ kfree(cstr.name);
+
paddr = pstr.name;
/* Null-terminate the name */
page_cache_release(cpage);
return *cookie = paddr;
errout:
+ kfree(cstr.name);
f2fs_fname_crypto_free_buffer(&pstr);
kunmap(cpage);
page_cache_release(cpage);
nid = nid_of_node(page);
f2fs_bug_on(sbi, page->index != nid);
+ if (wbc->for_reclaim) {
+ if (!down_read_trylock(&sbi->node_write))
+ goto redirty_out;
+ } else {
+ down_read(&sbi->node_write);
+ }
+
get_node_info(sbi, nid, &ni);
/* This page is already truncated */
if (unlikely(ni.blk_addr == NULL_ADDR)) {
ClearPageUptodate(page);
dec_page_count(sbi, F2FS_DIRTY_NODES);
+ up_read(&sbi->node_write);
unlock_page(page);
return 0;
}
- if (wbc->for_reclaim) {
- if (!down_read_trylock(&sbi->node_write))
- goto redirty_out;
- } else {
- down_read(&sbi->node_write);
- }
-
set_page_writeback(page);
fio.blk_addr = ni.blk_addr;
write_node_page(nid, &fio);
return;
/* readahead nat pages to be scanned */
- ra_meta_pages(sbi, NAT_BLOCK_OFFSET(nid), FREE_NID_PAGES, META_NAT);
+ ra_meta_pages(sbi, NAT_BLOCK_OFFSET(nid), FREE_NID_PAGES,
+ META_NAT, true);
while (1) {
struct page *page = get_current_nat_page(sbi, nid);
remove_free_nid(nm_i, nid);
}
mutex_unlock(&curseg->curseg_mutex);
+
+ ra_meta_pages(sbi, NAT_BLOCK_OFFSET(nm_i->next_scan_nid),
+ nm_i->ra_nid_pages, META_NAT, false);
}
/*
nrpages = min(last_offset - i, bio_blocks);
/* readahead node pages */
- ra_meta_pages(sbi, addr, nrpages, META_POR);
+ ra_meta_pages(sbi, addr, nrpages, META_POR, true);
for (idx = addr; idx < addr + nrpages; idx++) {
- struct page *page = get_meta_page(sbi, idx);
+ struct page *page = get_tmp_page(sbi, idx);
rn = F2FS_NODE(page);
sum_entry->nid = rn->footer.nid;
nm_i->fcnt = 0;
nm_i->nat_cnt = 0;
nm_i->ram_thresh = DEF_RAM_THRESHOLD;
+ nm_i->ra_nid_pages = DEF_RA_NID_PAGES;
INIT_RADIX_TREE(&nm_i->free_nid_root, GFP_ATOMIC);
INIT_LIST_HEAD(&nm_i->free_nid_list);
/* node block offset on the NAT area dedicated to the given start node id */
#define NAT_BLOCK_OFFSET(start_nid) (start_nid / NAT_ENTRY_PER_BLOCK)
-/* # of pages to perform readahead before building free nids */
+/* # of pages to perform synchronous readahead before building free nids */
#define FREE_NID_PAGES 4
+#define DEF_RA_NID_PAGES 4 /* # of nid pages to be readaheaded */
+
/* maximum readahead size for node during getting data blocks */
#define MAX_RA_NODE 128
curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
- ra_meta_pages(sbi, blkaddr, 1, META_POR);
+ ra_meta_pages(sbi, blkaddr, 1, META_POR, true);
while (1) {
struct fsync_inode_entry *entry;
if (!is_valid_blkaddr(sbi, blkaddr, META_POR))
return 0;
- page = get_meta_page(sbi, blkaddr);
+ page = get_tmp_page(sbi, blkaddr);
if (cp_ver != cpver_of_node(page))
break;
start = start_bidx_of_node(ofs_of_node(page), fi);
end = start + ADDRS_PER_PAGE(page, fi);
- f2fs_lock_op(sbi);
-
set_new_dnode(&dn, inode, NULL, NULL, 0);
err = get_dnode_of_data(&dn, start, ALLOC_NODE);
- if (err) {
- f2fs_unlock_op(sbi);
+ if (err)
goto out;
- }
f2fs_wait_on_page_writeback(dn.node_page, NODE);
set_page_dirty(dn.node_page);
err:
f2fs_put_dnode(&dn);
- f2fs_unlock_op(sbi);
out:
f2fs_msg(sbi->sb, KERN_NOTICE,
"recover_data: ino = %lx, recovered = %d blocks, err = %d",
ra_meta_pages_cond(sbi, blkaddr);
- page = get_meta_page(sbi, blkaddr);
+ page = get_tmp_page(sbi, blkaddr);
if (cp_ver != cpver_of_node(page)) {
f2fs_put_page(page, 1);
/* truncate meta pages to be used by the recovery */
truncate_inode_pages_range(META_MAPPING(sbi),
- MAIN_BLKADDR(sbi) << PAGE_CACHE_SHIFT, -1);
+ (loff_t)MAIN_BLKADDR(sbi) << PAGE_CACHE_SHIFT, -1);
if (err) {
truncate_inode_pages_final(NODE_MAPPING(sbi));
#include <linux/blkdev.h>
#include <linux/prefetch.h>
#include <linux/kthread.h>
-#include <linux/vmalloc.h>
#include <linux/swap.h>
+#include <linux/timer.h>
#include "f2fs.h"
#include "segment.h"
static struct kmem_cache *sit_entry_set_slab;
static struct kmem_cache *inmem_entry_slab;
+static unsigned long __reverse_ulong(unsigned char *str)
+{
+ unsigned long tmp = 0;
+ int shift = 24, idx = 0;
+
+#if BITS_PER_LONG == 64
+ shift = 56;
+#endif
+ while (shift >= 0) {
+ tmp |= (unsigned long)str[idx++] << shift;
+ shift -= BITS_PER_BYTE;
+ }
+ return tmp;
+}
+
/*
* __reverse_ffs is copied from include/asm-generic/bitops/__ffs.h since
* MSB and LSB are reversed in a byte by f2fs_set_bit.
int num = 0;
#if BITS_PER_LONG == 64
- if ((word & 0xffffffff) == 0) {
+ if ((word & 0xffffffff00000000UL) == 0)
num += 32;
+ else
word >>= 32;
- }
#endif
- if ((word & 0xffff) == 0) {
+ if ((word & 0xffff0000) == 0)
num += 16;
+ else
word >>= 16;
- }
- if ((word & 0xff) == 0) {
+
+ if ((word & 0xff00) == 0)
num += 8;
+ else
word >>= 8;
- }
+
if ((word & 0xf0) == 0)
num += 4;
else
word >>= 4;
+
if ((word & 0xc) == 0)
num += 2;
else
word >>= 2;
+
if ((word & 0x2) == 0)
num += 1;
return num;
* __find_rev_next(_zero)_bit is copied from lib/find_next_bit.c because
* f2fs_set_bit makes MSB and LSB reversed in a byte.
* Example:
- * LSB <--> MSB
- * f2fs_set_bit(0, bitmap) => 0000 0001
- * f2fs_set_bit(7, bitmap) => 1000 0000
+ * MSB <--> LSB
+ * f2fs_set_bit(0, bitmap) => 1000 0000
+ * f2fs_set_bit(7, bitmap) => 0000 0001
*/
static unsigned long __find_rev_next_bit(const unsigned long *addr,
unsigned long size, unsigned long offset)
{
- while (!f2fs_test_bit(offset, (unsigned char *)addr))
- offset++;
-
- if (offset > size)
- offset = size;
-
- return offset;
-#if 0
const unsigned long *p = addr + BIT_WORD(offset);
unsigned long result = offset & ~(BITS_PER_LONG - 1);
unsigned long tmp;
- unsigned long mask, submask;
- unsigned long quot, rest;
if (offset >= size)
return size;
if (!offset)
goto aligned;
- tmp = *(p++);
- quot = (offset >> 3) << 3;
- rest = offset & 0x7;
- mask = ~0UL << quot;
- submask = (unsigned char)(0xff << rest) >> rest;
- submask <<= quot;
- mask &= submask;
- tmp &= mask;
+ tmp = __reverse_ulong((unsigned char *)p);
+ tmp &= ~0UL >> offset;
+
if (size < BITS_PER_LONG)
goto found_first;
if (tmp)
size -= BITS_PER_LONG;
result += BITS_PER_LONG;
+ p++;
aligned:
while (size & ~(BITS_PER_LONG-1)) {
- tmp = *(p++);
+ tmp = __reverse_ulong((unsigned char *)p);
if (tmp)
goto found_middle;
result += BITS_PER_LONG;
size -= BITS_PER_LONG;
+ p++;
}
if (!size)
return result;
- tmp = *p;
+
+ tmp = __reverse_ulong((unsigned char *)p);
found_first:
- tmp &= (~0UL >> (BITS_PER_LONG - size));
- if (tmp == 0UL) /* Are any bits set? */
+ tmp &= (~0UL << (BITS_PER_LONG - size));
+ if (!tmp) /* Are any bits set? */
return result + size; /* Nope. */
found_middle:
return result + __reverse_ffs(tmp);
-#endif
}
static unsigned long __find_rev_next_zero_bit(const unsigned long *addr,
unsigned long size, unsigned long offset)
{
- while (f2fs_test_bit(offset, (unsigned char *)addr))
- offset++;
-
- if (offset > size)
- offset = size;
-
- return offset;
-#if 0
const unsigned long *p = addr + BIT_WORD(offset);
unsigned long result = offset & ~(BITS_PER_LONG - 1);
unsigned long tmp;
- unsigned long mask, submask;
- unsigned long quot, rest;
if (offset >= size)
return size;
if (!offset)
goto aligned;
- tmp = *(p++);
- quot = (offset >> 3) << 3;
- rest = offset & 0x7;
- mask = ~(~0UL << quot);
- submask = (unsigned char)~((unsigned char)(0xff << rest) >> rest);
- submask <<= quot;
- mask += submask;
- tmp |= mask;
+ tmp = __reverse_ulong((unsigned char *)p);
+ tmp |= ~((~0UL << offset) >> offset);
+
if (size < BITS_PER_LONG)
goto found_first;
- if (~tmp)
+ if (tmp != ~0UL)
goto found_middle;
size -= BITS_PER_LONG;
result += BITS_PER_LONG;
+ p++;
aligned:
while (size & ~(BITS_PER_LONG - 1)) {
- tmp = *(p++);
- if (~tmp)
+ tmp = __reverse_ulong((unsigned char *)p);
+ if (tmp != ~0UL)
goto found_middle;
result += BITS_PER_LONG;
size -= BITS_PER_LONG;
+ p++;
}
if (!size)
return result;
- tmp = *p;
+ tmp = __reverse_ulong((unsigned char *)p);
found_first:
- tmp |= ~0UL << size;
- if (tmp == ~0UL) /* Are any bits zero? */
+ tmp |= ~(~0UL << (BITS_PER_LONG - size));
+ if (tmp == ~0UL) /* Are any bits zero? */
return result + size; /* Nope. */
found_middle:
return result + __reverse_ffz(tmp);
-#endif
}
void register_inmem_page(struct inode *inode, struct page *page)
*/
if (has_not_enough_free_secs(sbi, 0)) {
mutex_lock(&sbi->gc_mutex);
- f2fs_gc(sbi);
+ f2fs_gc(sbi, false);
}
}
/* checkpoint is the only way to shrink partial cached entries */
if (!available_free_memory(sbi, NAT_ENTRIES) ||
excess_prefree_segs(sbi) ||
- !available_free_memory(sbi, INO_ENTRIES))
+ !available_free_memory(sbi, INO_ENTRIES) ||
+ jiffies > sbi->cp_expires)
f2fs_sync_fs(sbi->sb, true);
}
mutex_unlock(&sit_i->sentry_lock);
}
+bool is_checkpointed_data(struct f2fs_sb_info *sbi, block_t blkaddr)
+{
+ struct sit_info *sit_i = SIT_I(sbi);
+ unsigned int segno, offset;
+ struct seg_entry *se;
+ bool is_cp = false;
+
+ if (blkaddr == NEW_ADDR || blkaddr == NULL_ADDR)
+ return true;
+
+ mutex_lock(&sit_i->sentry_lock);
+
+ segno = GET_SEGNO(sbi, blkaddr);
+ se = get_seg_entry(sbi, segno);
+ offset = GET_BLKOFF_FROM_SEG0(sbi, blkaddr);
+
+ if (f2fs_test_bit(offset, se->ckpt_valid_map))
+ is_cp = true;
+
+ mutex_unlock(&sit_i->sentry_lock);
+
+ return is_cp;
+}
+
/*
* This function should be resided under the curseg_mutex lock
*/
.encrypted_page = NULL,
};
+ if (unlikely(page->index >= MAIN_BLKADDR(sbi)))
+ fio.rw &= ~REQ_META;
+
set_page_writeback(page);
f2fs_submit_page_mbio(&fio);
}
curseg->next_blkoff = GET_BLKOFF_FROM_SEG0(sbi, new_blkaddr);
__add_sum_entry(sbi, type, sum);
- refresh_sit_entry(sbi, old_blkaddr, new_blkaddr);
+ if (!recover_curseg)
+ update_sit_entry(sbi, new_blkaddr, 1);
+ if (GET_SEGNO(sbi, old_blkaddr) != NULL_SEGNO)
+ update_sit_entry(sbi, old_blkaddr, -1);
+
+ locate_dirty_segment(sbi, GET_SEGNO(sbi, old_blkaddr));
+ locate_dirty_segment(sbi, GET_SEGNO(sbi, new_blkaddr));
+
locate_dirty_segment(sbi, old_cursegno);
if (recover_curseg) {
}
}
+void f2fs_wait_on_encrypted_page_writeback(struct f2fs_sb_info *sbi,
+ block_t blkaddr)
+{
+ struct page *cpage;
+
+ if (blkaddr == NEW_ADDR)
+ return;
+
+ f2fs_bug_on(sbi, blkaddr == NULL_ADDR);
+
+ cpage = find_lock_page(META_MAPPING(sbi), blkaddr);
+ if (cpage) {
+ f2fs_wait_on_page_writeback(cpage, DATA);
+ f2fs_put_page(cpage, 1);
+ }
+}
+
static int read_compacted_summaries(struct f2fs_sb_info *sbi)
{
struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
if (npages >= 2)
ra_meta_pages(sbi, start_sum_block(sbi), npages,
- META_CP);
+ META_CP, true);
/* restore for compacted data summary */
if (read_compacted_summaries(sbi))
if (__exist_node_summaries(sbi))
ra_meta_pages(sbi, sum_blk_addr(sbi, NR_CURSEG_TYPE, type),
- NR_CURSEG_TYPE - type, META_CP);
+ NR_CURSEG_TYPE - type, META_CP, true);
for (; type <= CURSEG_COLD_NODE; type++) {
err = read_normal_summaries(sbi, type);
SM_I(sbi)->sit_info = sit_i;
- sit_i->sentries = vzalloc(MAIN_SEGS(sbi) * sizeof(struct seg_entry));
+ sit_i->sentries = f2fs_kvzalloc(MAIN_SEGS(sbi) *
+ sizeof(struct seg_entry), GFP_KERNEL);
if (!sit_i->sentries)
return -ENOMEM;
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
- sit_i->dirty_sentries_bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+ sit_i->dirty_sentries_bitmap = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
if (!sit_i->dirty_sentries_bitmap)
return -ENOMEM;
return -ENOMEM;
if (sbi->segs_per_sec > 1) {
- sit_i->sec_entries = vzalloc(MAIN_SECS(sbi) *
- sizeof(struct sec_entry));
+ sit_i->sec_entries = f2fs_kvzalloc(MAIN_SECS(sbi) *
+ sizeof(struct sec_entry), GFP_KERNEL);
if (!sit_i->sec_entries)
return -ENOMEM;
}
SM_I(sbi)->free_info = free_i;
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
- free_i->free_segmap = kmalloc(bitmap_size, GFP_KERNEL);
+ free_i->free_segmap = f2fs_kvmalloc(bitmap_size, GFP_KERNEL);
if (!free_i->free_segmap)
return -ENOMEM;
sec_bitmap_size = f2fs_bitmap_size(MAIN_SECS(sbi));
- free_i->free_secmap = kmalloc(sec_bitmap_size, GFP_KERNEL);
+ free_i->free_secmap = f2fs_kvmalloc(sec_bitmap_size, GFP_KERNEL);
if (!free_i->free_secmap)
return -ENOMEM;
int nrpages = MAX_BIO_BLOCKS(sbi);
do {
- readed = ra_meta_pages(sbi, start_blk, nrpages, META_SIT);
+ readed = ra_meta_pages(sbi, start_blk, nrpages, META_SIT, true);
start = start_blk * sit_i->sents_per_block;
end = (start_blk + readed) * sit_i->sents_per_block;
struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
unsigned int bitmap_size = f2fs_bitmap_size(MAIN_SECS(sbi));
- dirty_i->victim_secmap = kzalloc(bitmap_size, GFP_KERNEL);
+ dirty_i->victim_secmap = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
if (!dirty_i->victim_secmap)
return -ENOMEM;
return 0;
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
for (i = 0; i < NR_DIRTY_TYPE; i++) {
- dirty_i->dirty_segmap[i] = kzalloc(bitmap_size, GFP_KERNEL);
+ dirty_i->dirty_segmap[i] = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
if (!dirty_i->dirty_segmap[i])
return -ENOMEM;
}
struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
mutex_lock(&dirty_i->seglist_lock);
- kfree(dirty_i->dirty_segmap[dirty_type]);
+ kvfree(dirty_i->dirty_segmap[dirty_type]);
dirty_i->nr_dirty[dirty_type] = 0;
mutex_unlock(&dirty_i->seglist_lock);
}
static void destroy_victim_secmap(struct f2fs_sb_info *sbi)
{
struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
- kfree(dirty_i->victim_secmap);
+ kvfree(dirty_i->victim_secmap);
}
static void destroy_dirty_segmap(struct f2fs_sb_info *sbi)
if (!free_i)
return;
SM_I(sbi)->free_info = NULL;
- kfree(free_i->free_segmap);
- kfree(free_i->free_secmap);
+ kvfree(free_i->free_segmap);
+ kvfree(free_i->free_secmap);
kfree(free_i);
}
}
kfree(sit_i->tmp_map);
- vfree(sit_i->sentries);
- vfree(sit_i->sec_entries);
- kfree(sit_i->dirty_sentries_bitmap);
+ kvfree(sit_i->sentries);
+ kvfree(sit_i->sec_entries);
+ kvfree(sit_i->dirty_sentries_bitmap);
SM_I(sbi)->sit_info = NULL;
kfree(sit_i->sit_bitmap);
/*
* BG_GC means the background cleaning job.
* FG_GC means the on-demand cleaning job.
+ * FORCE_FG_GC means on-demand cleaning job in background.
*/
enum {
BG_GC = 0,
- FG_GC
+ FG_GC,
+ FORCE_FG_GC,
};
/* for a function parameter to select a victim segment */
F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, min_ipu_util, min_ipu_util);
F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, min_fsync_blocks, min_fsync_blocks);
F2FS_RW_ATTR(NM_INFO, f2fs_nm_info, ram_thresh, ram_thresh);
+F2FS_RW_ATTR(NM_INFO, f2fs_nm_info, ra_nid_pages, ra_nid_pages);
F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_victim_search, max_victim_search);
F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, dir_level, dir_level);
+F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, cp_interval, cp_interval);
#define ATTR_LIST(name) (&f2fs_attr_##name.attr)
static struct attribute *f2fs_attrs[] = {
ATTR_LIST(max_victim_search),
ATTR_LIST(dir_level),
ATTR_LIST(ram_thresh),
+ ATTR_LIST(ra_nid_pages),
+ ATTR_LIST(cp_interval),
NULL,
};
if (!name)
return -ENOMEM;
- if (strlen(name) == 2 && !strncmp(name, "on", 2))
+ if (strlen(name) == 2 && !strncmp(name, "on", 2)) {
set_opt(sbi, BG_GC);
- else if (strlen(name) == 3 && !strncmp(name, "off", 3))
+ clear_opt(sbi, FORCE_FG_GC);
+ } else if (strlen(name) == 3 && !strncmp(name, "off", 3)) {
clear_opt(sbi, BG_GC);
- else {
+ clear_opt(sbi, FORCE_FG_GC);
+ } else if (strlen(name) == 4 && !strncmp(name, "sync", 4)) {
+ set_opt(sbi, BG_GC);
+ set_opt(sbi, FORCE_FG_GC);
+ } else {
kfree(name);
return -EINVAL;
}
{
struct f2fs_sb_info *sbi = F2FS_SB(root->d_sb);
- if (!f2fs_readonly(sbi->sb) && test_opt(sbi, BG_GC))
- seq_printf(seq, ",background_gc=%s", "on");
- else
+ if (!f2fs_readonly(sbi->sb) && test_opt(sbi, BG_GC)) {
+ if (test_opt(sbi, FORCE_FG_GC))
+ seq_printf(seq, ",background_gc=%s", "sync");
+ else
+ seq_printf(seq, ",background_gc=%s", "on");
+ } else {
seq_printf(seq, ",background_gc=%s", "off");
+ }
if (test_opt(sbi, DISABLE_ROLL_FORWARD))
seq_puts(seq, ",disable_roll_forward");
if (test_opt(sbi, DISCARD))
int err, active_logs;
bool need_restart_gc = false;
bool need_stop_gc = false;
+ bool no_extent_cache = !test_opt(sbi, EXTENT_CACHE);
sync_filesystem(sb);
if (f2fs_readonly(sb) && (*flags & MS_RDONLY))
goto skip;
+ /* disallow enable/disable extent_cache dynamically */
+ if (no_extent_cache == !!test_opt(sbi, EXTENT_CACHE)) {
+ err = -EINVAL;
+ f2fs_msg(sbi->sb, KERN_WARNING,
+ "switch extent_cache option is not allowed");
+ goto restore_opts;
+ }
+
/*
* We stop the GC thread if FS is mounted as RO
* or if background_gc = off is passed in mount
atomic_set(&sbi->nr_pages[i], 0);
sbi->dir_level = DEF_DIR_LEVEL;
+ sbi->cp_interval = DEF_CP_INTERVAL;
clear_sbi_flag(sbi, SBI_NEED_FSCK);
INIT_LIST_HEAD(&sbi->s_list);
f2fs_commit_super(sbi, true);
}
+ sbi->cp_expires = round_jiffies_up(jiffies);
+
return 0;
free_kobj:
struct wb_writeback_work *base_work,
bool skip_if_busy)
{
- int next_memcg_id = 0;
- struct bdi_writeback *wb;
- struct wb_iter iter;
+ struct bdi_writeback *last_wb = NULL;
+ struct bdi_writeback *wb = list_entry_rcu(&bdi->wb_list,
+ struct bdi_writeback, bdi_node);
might_sleep();
restart:
rcu_read_lock();
- bdi_for_each_wb(wb, bdi, &iter, next_memcg_id) {
+ list_for_each_entry_continue_rcu(wb, &bdi->wb_list, bdi_node) {
DEFINE_WB_COMPLETION_ONSTACK(fallback_work_done);
struct wb_writeback_work fallback_work;
struct wb_writeback_work *work;
long nr_pages;
+ if (last_wb) {
+ wb_put(last_wb);
+ last_wb = NULL;
+ }
+
/* SYNC_ALL writes out I_DIRTY_TIME too */
if (!wb_has_dirty_io(wb) &&
(base_work->sync_mode == WB_SYNC_NONE ||
wb_queue_work(wb, work);
- next_memcg_id = wb->memcg_css->id + 1;
+ /*
+ * Pin @wb so that it stays on @bdi->wb_list. This allows
+ * continuing iteration from @wb after dropping and
+ * regrabbing rcu read lock.
+ */
+ wb_get(wb);
+ last_wb = wb;
+
rcu_read_unlock();
wb_wait_for_completion(bdi, &fallback_work_done);
goto restart;
}
rcu_read_unlock();
+
+ if (last_wb)
+ wb_put(last_wb);
}
#else /* CONFIG_CGROUP_WRITEBACK */
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
struct bdi_writeback *wb;
- struct wb_iter iter;
if (!bdi_has_dirty_io(bdi))
continue;
- bdi_for_each_wb(wb, bdi, &iter, 0)
+ list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
wb_start_writeback(wb, wb_split_bdi_pages(wb, nr_pages),
false, reason);
}
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
struct bdi_writeback *wb;
- struct wb_iter iter;
- bdi_for_each_wb(wb, bdi, &iter, 0)
- if (!list_empty(&bdi->wb.b_dirty_time))
- wb_wakeup(&bdi->wb);
+ list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
+ if (!list_empty(&wb->b_dirty_time))
+ wb_wakeup(wb);
}
rcu_read_unlock();
schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
int __fscache_register_netfs(struct fscache_netfs *netfs)
{
struct fscache_netfs *ptr;
+ struct fscache_cookie *cookie;
int ret;
_enter("{%s}", netfs->name);
INIT_LIST_HEAD(&netfs->link);
/* allocate a cookie for the primary index */
- netfs->primary_index =
- kmem_cache_zalloc(fscache_cookie_jar, GFP_KERNEL);
+ cookie = kmem_cache_zalloc(fscache_cookie_jar, GFP_KERNEL);
- if (!netfs->primary_index) {
+ if (!cookie) {
_leave(" = -ENOMEM");
return -ENOMEM;
}
/* initialise the primary index cookie */
- atomic_set(&netfs->primary_index->usage, 1);
- atomic_set(&netfs->primary_index->n_children, 0);
- atomic_set(&netfs->primary_index->n_active, 1);
+ atomic_set(&cookie->usage, 1);
+ atomic_set(&cookie->n_children, 0);
+ atomic_set(&cookie->n_active, 1);
- netfs->primary_index->def = &fscache_fsdef_netfs_def;
- netfs->primary_index->parent = &fscache_fsdef_index;
- netfs->primary_index->netfs_data = netfs;
- netfs->primary_index->flags = 1 << FSCACHE_COOKIE_ENABLED;
+ cookie->def = &fscache_fsdef_netfs_def;
+ cookie->parent = &fscache_fsdef_index;
+ cookie->netfs_data = netfs;
+ cookie->flags = 1 << FSCACHE_COOKIE_ENABLED;
- atomic_inc(&netfs->primary_index->parent->usage);
- atomic_inc(&netfs->primary_index->parent->n_children);
-
- spin_lock_init(&netfs->primary_index->lock);
- INIT_HLIST_HEAD(&netfs->primary_index->backing_objects);
+ spin_lock_init(&cookie->lock);
+ INIT_HLIST_HEAD(&cookie->backing_objects);
/* check the netfs type is not already present */
down_write(&fscache_addremove_sem);
goto already_registered;
}
+ atomic_inc(&cookie->parent->usage);
+ atomic_inc(&cookie->parent->n_children);
+
+ netfs->primary_index = cookie;
list_add(&netfs->link, &fscache_netfs_list);
ret = 0;
already_registered:
up_write(&fscache_addremove_sem);
- if (ret < 0) {
- netfs->primary_index->parent = NULL;
- __fscache_cookie_put(netfs->primary_index);
- netfs->primary_index = NULL;
- }
+ if (ret < 0)
+ kmem_cache_free(fscache_cookie_jar, cookie);
_leave(" = %d", ret);
return ret;
if (!(mode & FALLOC_FL_KEEP_SIZE) && (pos + count) > inode->i_size) {
i_size_write(inode, pos + count);
- /* Marks the inode as dirty */
file_update_time(file);
+ mark_inode_dirty(inode);
}
return generic_write_sync(file, pos, count);
*/
static int do_promote(struct gfs2_glock *gl)
-__releases(&gl->gl_spin)
-__acquires(&gl->gl_spin)
+__releases(&gl->gl_lockref.lock)
+__acquires(&gl->gl_lockref.lock)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh, *tmp;
if (may_grant(gl, gh)) {
if (gh->gh_list.prev == &gl->gl_holders &&
glops->go_lock) {
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
/* FIXME: eliminate this eventually */
ret = glops->go_lock(gh);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
if (ret) {
if (ret == 1)
return 2;
unsigned state = ret & LM_OUT_ST_MASK;
int rv;
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
trace_gfs2_glock_state_change(gl, state);
state_change(gl, state);
gh = find_first_waiter(gl);
pr_err("wanted %u got %u\n", gl->gl_target, state);
GLOCK_BUG_ON(gl, 1);
}
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
return;
}
gfs2_demote_wake(gl);
if (state != LM_ST_UNLOCKED) {
if (glops->go_xmote_bh) {
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
rv = glops->go_xmote_bh(gl, gh);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
if (rv) {
do_error(gl, rv);
goto out;
out:
clear_bit(GLF_LOCK, &gl->gl_flags);
out_locked:
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
}
/**
*/
static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target)
-__releases(&gl->gl_spin)
-__acquires(&gl->gl_spin)
+__releases(&gl->gl_lockref.lock)
+__acquires(&gl->gl_lockref.lock)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
(gl->gl_state == LM_ST_EXCLUSIVE) ||
(lck_flags & (LM_FLAG_TRY|LM_FLAG_TRY_1CB)))
clear_bit(GLF_BLOCKING, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (glops->go_sync)
glops->go_sync(gl);
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags))
gfs2_glock_put(gl);
}
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
}
/**
*/
static void run_queue(struct gfs2_glock *gl, const int nonblock)
-__releases(&gl->gl_spin)
-__acquires(&gl->gl_spin)
+__releases(&gl->gl_lockref.lock)
+__acquires(&gl->gl_lockref.lock)
{
struct gfs2_holder *gh = NULL;
int ret;
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
}
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
}
}
run_queue(gl, 0);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (!delay)
gfs2_glock_put(gl);
else {
*/
static inline void add_to_queue(struct gfs2_holder *gh)
-__releases(&gl->gl_spin)
-__acquires(&gl->gl_spin)
+__releases(&gl->gl_lockref.lock)
+__acquires(&gl->gl_lockref.lock)
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
do_cancel:
gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
if (!(gh->gh_flags & LM_FLAG_PRIORITY)) {
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (sdp->sd_lockstruct.ls_ops->lm_cancel)
sdp->sd_lockstruct.ls_ops->lm_cancel(gl);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
}
return;
if (test_bit(GLF_LRU, &gl->gl_flags))
gfs2_glock_remove_from_lru(gl);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
add_to_queue(gh);
if (unlikely((LM_FLAG_NOEXP & gh->gh_flags) &&
test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))) {
gl->gl_lockref.count--;
}
run_queue(gl, 1);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (!(gh->gh_flags & GL_ASYNC))
error = gfs2_glock_wait(gh);
unsigned delay = 0;
int fast_path = 0;
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
if (gh->gh_flags & GL_NOCACHE)
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
if (find_first_holder(gl) == NULL) {
if (glops->go_unlock) {
GLOCK_BUG_ON(gl, test_and_set_bit(GLF_LOCK, &gl->gl_flags));
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
glops->go_unlock(gh);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
clear_bit(GLF_LOCK, &gl->gl_flags);
}
if (list_empty(&gl->gl_holders) &&
gfs2_glock_add_to_lru(gl);
trace_gfs2_glock_queue(gh, 0);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (likely(fast_path))
return;
delay = gl->gl_hold_time;
}
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
handle_callback(gl, state, delay, true);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
* @gl: Pointer to the glock
* @ret: The return value from the dlm
*
- * The gl_reply field is under the gl_spin lock so that it is ok
+ * The gl_reply field is under the gl_lockref.lock lock so that it is ok
* to use a bitfield shared with other glock state fields.
*/
{
struct lm_lockstruct *ls = &gl->gl_name.ln_sbd->sd_lockstruct;
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
gl->gl_reply = ret;
if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_recover_flags))) {
if (gfs2_should_freeze(gl)) {
set_bit(GLF_FROZEN, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
return;
}
}
gl->gl_lockref.count++;
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
while(!list_empty(list)) {
gl = list_entry(list->next, struct gfs2_glock, gl_lru);
list_del_init(&gl->gl_lru);
- if (!spin_trylock(&gl->gl_spin)) {
+ if (!spin_trylock(&gl->gl_lockref.lock)) {
add_back_to_lru:
list_add(&gl->gl_lru, &lru_list);
atomic_inc(&lru_count);
continue;
}
if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
goto add_back_to_lru;
}
clear_bit(GLF_LRU, &gl->gl_flags);
WARN_ON(!test_and_clear_bit(GLF_LOCK, &gl->gl_flags));
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gl->gl_lockref.count--;
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
cond_resched_lock(&lru_lock);
}
}
{
gfs2_glock_remove_from_lru(gl);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
if (gl->gl_state != LM_ST_UNLOCKED)
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
static void dump_glock(struct seq_file *seq, struct gfs2_glock *gl)
{
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
gfs2_dump_glock(seq, gl);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
}
static void dump_glock_func(struct gfs2_glock *gl)
ret = gfs2_truncatei_resume(ip);
gfs2_assert_withdraw(gl->gl_name.ln_sbd, ret == 0);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
clear_bit(GLF_LOCK, &gl->gl_flags);
run_queue(gl, 1);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
}
static const char *state2str(unsigned state)
struct pid *pid;
/* Look in glock's list of holders for one with current task as owner */
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
pid = task_pid(current);
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
if (!test_bit(HIF_HOLDER, &gh->gh_iflags))
}
gh = NULL;
out:
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
return gh;
}
struct gfs2_rgrpd *rgd;
int error;
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
rgd = gl->gl_object;
if (rgd)
gfs2_rgrp_brelse(rgd);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags))
return;
mapping_set_error(mapping, error);
gfs2_ail_empty_gl(gl);
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
rgd = gl->gl_object;
if (rgd)
gfs2_free_clones(rgd);
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
}
/**
* iopen_go_callback - schedule the dcache entry for the inode to be deleted
* @gl: the glock
*
- * gl_spin lock is held while calling this
+ * gl_lockref.lock lock is held while calling this
*/
static void iopen_go_callback(struct gfs2_glock *gl, bool remote)
{
struct lm_lockname gl_name;
struct lockref gl_lockref;
-#define gl_spin gl_lockref.lock
- /* State fields protected by gl_spin */
+ /* State fields protected by gl_lockref.lock */
unsigned int gl_state:2, /* Current state */
gl_target:2, /* Target state */
gl_demote_state:2, /* State requested by remote node */
struct gfs2_glock *gl = foo;
INIT_HLIST_BL_NODE(&gl->gl_list);
- spin_lock_init(&gl->gl_spin);
+ spin_lock_init(&gl->gl_lockref.lock);
INIT_LIST_HEAD(&gl->gl_holders);
INIT_LIST_HEAD(&gl->gl_lru);
INIT_LIST_HEAD(&gl->gl_ail_list);
up_write(&s->s_umount);
blkdev_put(bdev, mode);
down_write(&s->s_umount);
+ } else {
+ /* s_mode must be set before deactivate_locked_super calls */
+ s->s_mode = mode;
}
memset(&args, 0, sizeof(args));
} else {
char b[BDEVNAME_SIZE];
- s->s_mode = mode;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(bdev));
error = fill_super(s, &args, flags & MS_SILENT ? 1 : 0);
rb_erase(n, &sdp->sd_rindex_tree);
if (gl) {
- spin_lock(&gl->gl_spin);
+ spin_lock(&gl->gl_lockref.lock);
gl->gl_object = NULL;
- spin_unlock(&gl->gl_spin);
+ spin_unlock(&gl->gl_lockref.lock);
gfs2_glock_add_to_lru(gl);
gfs2_glock_put(gl);
}
unlock_buffer(bh);
if (bh->b_private == NULL)
bd = gfs2_alloc_bufdata(gl, bh, &gfs2_databuf_lops);
+ else
+ bd = bh->b_private;
lock_buffer(bh);
gfs2_log_lock(sdp);
}
lock_page(bh->b_page);
if (bh->b_private == NULL)
bd = gfs2_alloc_bufdata(gl, bh, &gfs2_buf_lops);
+ else
+ bd = bh->b_private;
unlock_page(bh->b_page);
lock_buffer(bh);
gfs2_log_lock(sdp);
struct journal_head *last_jh;
struct journal_head *next_jh = jh;
int ret;
- int freed = 0;
if (!jh)
return 0;
else
ret = __jbd2_journal_remove_checkpoint(jh) + 1;
if (!ret)
- return freed;
+ return 0;
if (ret == 2)
return 1;
- freed = 1;
/*
* This function only frees up some memory
* if possible so we dont have an obligation
* requested:
*/
if (need_resched())
- return freed;
+ return 0;
} while (jh != last_jh);
- return freed;
+ return 0;
}
/*
tmp->h_commit_sec = cpu_to_be64(now.tv_sec);
tmp->h_commit_nsec = cpu_to_be32(now.tv_nsec);
- if (JBD2_HAS_COMPAT_FEATURE(journal,
- JBD2_FEATURE_COMPAT_CHECKSUM)) {
+ if (jbd2_has_feature_checksum(journal)) {
tmp->h_chksum_type = JBD2_CRC32_CHKSUM;
tmp->h_chksum_size = JBD2_CRC32_CHKSUM_SIZE;
tmp->h_chksum[0] = cpu_to_be32(crc32_sum);
bh->b_end_io = journal_end_buffer_io_sync;
if (journal->j_flags & JBD2_BARRIER &&
- !JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT))
+ !jbd2_has_feature_async_commit(journal))
ret = submit_bh(WRITE_SYNC | WRITE_FLUSH_FUA, bh);
else
ret = submit_bh(WRITE_SYNC, bh);
unsigned long long block)
{
tag->t_blocknr = cpu_to_be32(block & (u32)~0);
- if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(j))
tag->t_blocknr_high = cpu_to_be32((block >> 31) >> 1);
}
bh->b_size);
kunmap_atomic(addr);
- if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ if (jbd2_has_feature_csum3(j))
tag3->t_checksum = cpu_to_be32(csum32);
else
tag->t_checksum = cpu_to_be16(csum32);
/*
* Compute checksum.
*/
- if (JBD2_HAS_COMPAT_FEATURE(journal,
- JBD2_FEATURE_COMPAT_CHECKSUM)) {
+ if (jbd2_has_feature_checksum(journal)) {
crc32_sum =
jbd2_checksum_data(crc32_sum, bh);
}
blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL);
/* Done it all: now write the commit record asynchronously. */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
+ if (jbd2_has_feature_async_commit(journal)) {
err = journal_submit_commit_record(journal, commit_transaction,
&cbh, crc32_sum);
if (err)
commit_transaction->t_state = T_COMMIT_JFLUSH;
write_unlock(&journal->j_state_lock);
- if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
+ if (!jbd2_has_feature_async_commit(journal)) {
err = journal_submit_commit_record(journal, commit_transaction,
&cbh, crc32_sum);
if (err)
}
if (cbh)
err = journal_wait_on_commit_record(journal, cbh);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) &&
+ if (jbd2_has_feature_async_commit(journal) &&
journal->j_flags & JBD2_BARRIER) {
blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL);
}
/* Checksumming functions */
static int jbd2_verify_csum_type(journal_t *j, journal_superblock_t *sb)
{
- if (!jbd2_journal_has_csum_v2or3(j))
+ if (!jbd2_journal_has_csum_v2or3_feature(j))
return 1;
return sb->s_checksum_type == JBD2_CRC32C_CHKSUM;
goto out;
}
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) &&
- JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
+ if (jbd2_has_feature_csum2(journal) &&
+ jbd2_has_feature_csum3(journal)) {
/* Can't have checksum v2 and v3 at the same time! */
printk(KERN_ERR "JBD2: Can't enable checksumming v2 and v3 "
"at the same time!\n");
goto out;
}
- if (jbd2_journal_has_csum_v2or3(journal) &&
- JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM)) {
+ if (jbd2_journal_has_csum_v2or3_feature(journal) &&
+ jbd2_has_feature_checksum(journal)) {
/* Can't have checksum v1 and v2 on at the same time! */
printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2/3 "
"at the same time!\n");
}
/* Load the checksum driver */
- if (jbd2_journal_has_csum_v2or3(journal)) {
+ if (jbd2_journal_has_csum_v2or3_feature(journal)) {
journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
if (IS_ERR(journal->j_chksum_driver)) {
printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
/* Check superblock checksum */
if (!jbd2_superblock_csum_verify(journal, sb)) {
printk(KERN_ERR "JBD2: journal checksum error\n");
+ err = -EFSBADCRC;
goto out;
}
printk(KERN_ERR "JBD2: journal transaction %u on %s "
"is corrupt.\n", journal->j_failed_commit,
journal->j_devname);
- return -EIO;
+ return -EFSCORRUPTED;
}
/* OK, we've finished with the dynamic journal bits:
__jbd2_journal_abort_hard(journal);
- if (errno)
+ if (errno) {
jbd2_journal_update_sb_errno(journal);
+ write_lock(&journal->j_state_lock);
+ journal->j_flags |= JBD2_REC_ERR;
+ write_unlock(&journal->j_state_lock);
+ }
}
/**
{
size_t sz;
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ if (jbd2_has_feature_csum3(journal))
return sizeof(journal_block_tag3_t);
sz = sizeof(journal_block_tag_t);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_has_feature_csum2(journal))
sz += sizeof(__u16);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(journal))
return sz;
else
return sz - sizeof(__u32);
if (offset >= journal->j_maxlen) {
printk(KERN_ERR "JBD2: corrupted journal superblock\n");
- return -EIO;
+ return -EFSCORRUPTED;
}
err = jbd2_journal_bmap(journal, offset, &blocknr);
journal_block_tag_t *tag)
{
unsigned long long block = be32_to_cpu(tag->t_blocknr);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(journal))
block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
return block;
}
csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize);
- if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ if (jbd2_has_feature_csum3(j))
return tag3->t_checksum == cpu_to_be32(csum32);
else
return tag->t_checksum == cpu_to_be16(csum32);
printk(KERN_ERR "JBD2: Invalid checksum "
"recovering block %lu in log\n",
next_log_block);
- err = -EIO;
+ err = -EFSBADCRC;
brelse(bh);
goto failed;
}
* just skip over the blocks it describes. */
if (pass != PASS_REPLAY) {
if (pass == PASS_SCAN &&
- JBD2_HAS_COMPAT_FEATURE(journal,
- JBD2_FEATURE_COMPAT_CHECKSUM) &&
+ jbd2_has_feature_checksum(journal) &&
!info->end_transaction) {
if (calc_chksums(journal, bh,
&next_log_block,
journal, tag, obh->b_data,
be32_to_cpu(tmp->h_sequence))) {
brelse(obh);
- success = -EIO;
+ success = -EFSBADCRC;
printk(KERN_ERR "JBD2: Invalid "
"checksum recovering "
"block %llu in log\n",
* much to do other than move on to the next sequence
* number. */
if (pass == PASS_SCAN &&
- JBD2_HAS_COMPAT_FEATURE(journal,
- JBD2_FEATURE_COMPAT_CHECKSUM)) {
+ jbd2_has_feature_checksum(journal)) {
int chksum_err, chksum_seen;
struct commit_header *cbh =
(struct commit_header *)bh->b_data;
if (chksum_err) {
info->end_transaction = next_commit_ID;
- if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
+ if (!jbd2_has_feature_async_commit(journal)) {
journal->j_failed_commit =
next_commit_ID;
brelse(bh);
bh->b_data)) {
info->end_transaction = next_commit_ID;
- if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
+ if (!jbd2_has_feature_async_commit(journal)) {
journal->j_failed_commit =
next_commit_ID;
brelse(bh);
rcount = be32_to_cpu(header->r_count);
if (!jbd2_revoke_block_csum_verify(journal, header))
- return -EINVAL;
+ return -EFSBADCRC;
if (jbd2_journal_has_csum_v2or3(journal))
csum_size = sizeof(struct jbd2_journal_revoke_tail);
return -EINVAL;
max = rcount;
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(journal))
record_len = 8;
while (offset + record_len <= max) {
if (jbd2_journal_has_csum_v2or3(journal))
csum_size = sizeof(struct jbd2_journal_revoke_tail);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(journal))
sz = 8;
else
sz = 4;
*descriptorp = descriptor;
}
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
+ if (jbd2_has_feature_64bit(journal))
* ((__be64 *)(&descriptor->b_data[offset])) =
cpu_to_be64(record->blocknr);
else
static struct bio *
do_mpage_readpage(struct bio *bio, struct page *page, unsigned nr_pages,
sector_t *last_block_in_bio, struct buffer_head *map_bh,
- unsigned long *first_logical_block, get_block_t get_block)
+ unsigned long *first_logical_block, get_block_t get_block,
+ gfp_t gfp)
{
struct inode *inode = page->mapping->host;
const unsigned blkbits = inode->i_blkbits;
goto out;
}
bio = mpage_alloc(bdev, blocks[0] << (blkbits - 9),
- min_t(int, nr_pages, BIO_MAX_PAGES),
- GFP_KERNEL);
+ min_t(int, nr_pages, BIO_MAX_PAGES), gfp);
if (bio == NULL)
goto confused;
}
sector_t last_block_in_bio = 0;
struct buffer_head map_bh;
unsigned long first_logical_block = 0;
+ gfp_t gfp = GFP_KERNEL & mapping_gfp_mask(mapping);
map_bh.b_state = 0;
map_bh.b_size = 0;
prefetchw(&page->flags);
list_del(&page->lru);
if (!add_to_page_cache_lru(page, mapping,
- page->index, GFP_KERNEL)) {
+ page->index,
+ gfp)) {
bio = do_mpage_readpage(bio, page,
nr_pages - page_idx,
&last_block_in_bio, &map_bh,
&first_logical_block,
- get_block);
+ get_block, gfp);
}
page_cache_release(page);
}
sector_t last_block_in_bio = 0;
struct buffer_head map_bh;
unsigned long first_logical_block = 0;
+ gfp_t gfp = GFP_KERNEL & mapping_gfp_mask(page->mapping);
map_bh.b_state = 0;
map_bh.b_size = 0;
bio = do_mpage_readpage(bio, page, 1, &last_block_in_bio,
- &map_bh, &first_logical_block, get_block);
+ &map_bh, &first_logical_block, get_block, gfp);
if (bio)
mpage_bio_submit(READ, bio);
return 0;
negative = d_is_negative(dentry);
if (read_seqcount_retry(&dentry->d_seq, seq))
return -ECHILD;
- if (negative)
- return -ENOENT;
/*
* This sequence count validates that the parent had no
goto unlazy;
}
}
+ /*
+ * Note: do negative dentry check after revalidation in
+ * case that drops it.
+ */
+ if (negative)
+ return -ENOENT;
path->mnt = mnt;
path->dentry = dentry;
if (likely(__follow_mount_rcu(nd, path, inode, seqp)))
u32 device_generation = 0;
int error;
- /*
- * We do not attempt to support I/O smaller than the fs block size,
- * or not aligned to it.
- */
- if (args->lg_minlength < block_size) {
- dprintk("pnfsd: I/O too small\n");
- goto out_layoutunavailable;
- }
if (seg->offset & (block_size - 1)) {
dprintk("pnfsd: I/O misaligned\n");
goto out_layoutunavailable;
if (ret < 0) {
mlog(ML_ERROR, "failed to dispatch assert master work\n");
response = DLM_MASTER_RESP_ERROR;
+ spin_unlock(&res->spinlock);
dlm_lockres_put(res);
} else {
dispatched = 1;
__dlm_lockres_grab_inflight_worker(dlm, res);
+ spin_unlock(&res->spinlock);
}
- spin_unlock(&res->spinlock);
} else {
if (res)
dlm_lockres_put(res);
} else {
dispatched = 1;
__dlm_lockres_grab_inflight_worker(dlm, res);
+ spin_unlock(&res->spinlock);
}
- spin_unlock(&res->spinlock);
} else {
/* put.. incase we are not the master */
spin_unlock(&res->spinlock);
if (len == 0)
return 0;
- old_file = ovl_path_open(old, O_RDONLY);
+ old_file = ovl_path_open(old, O_LARGEFILE | O_RDONLY);
if (IS_ERR(old_file))
return PTR_ERR(old_file);
- new_file = ovl_path_open(new, O_WRONLY);
+ new_file = ovl_path_open(new, O_LARGEFILE | O_WRONLY);
if (IS_ERR(new_file)) {
error = PTR_ERR(new_file);
goto out_fput;
out_cleanup:
ovl_cleanup(wdir, newdentry);
- goto out;
+ goto out2;
}
/*
ovl_path_upper(dentry, &realpath);
}
+ if (realpath.dentry->d_flags & DCACHE_OP_SELECT_INODE)
+ return realpath.dentry->d_op->d_select_inode(realpath.dentry, file_flags);
+
return d_backing_inode(realpath.dentry);
}
mntput(ufs->upper_mnt);
for (i = 0; i < ufs->numlower; i++)
mntput(ufs->lower_mnt[i]);
+ kfree(ufs->lower_mnt);
kfree(ufs->config.lowerdir);
kfree(ufs->config.upperdir);
oe->lowerstack[i].dentry = stack[i].dentry;
oe->lowerstack[i].mnt = ufs->lower_mnt[i];
}
+ kfree(stack);
root_dentry->d_fsdata = oe;
if (pte_present(ptent)) {
ptent = pte_wrprotect(ptent);
- ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
+ ptent = pte_clear_soft_dirty(ptent);
} else if (is_swap_pte(ptent)) {
ptent = pte_swp_clear_soft_dirty(ptent);
}
pmd_t pmd = *pmdp;
pmd = pmd_wrprotect(pmd);
- pmd = pmd_clear_flags(pmd, _PAGE_SOFT_DIRTY);
+ pmd = pmd_clear_soft_dirty(pmd);
if (vma->vm_flags & VM_SOFTDIRTY)
vma->vm_flags &= ~VM_SOFTDIRTY;
config PSTORE
- bool "Persistent store support"
+ tristate "Persistent store support"
default n
select ZLIB_DEFLATE
select ZLIB_INFLATE
# Makefile for the linux pstorefs routines.
#
-obj-y += pstore.o
+obj-$(CONFIG_PSTORE) += pstore.o
pstore-objs += inode.o platform.o
-obj-$(CONFIG_PSTORE_FTRACE) += ftrace.o
+pstore-$(CONFIG_PSTORE_FTRACE) += ftrace.o
-obj-$(CONFIG_PSTORE_PMSG) += pmsg.o
+pstore-$(CONFIG_PSTORE_PMSG) += pmsg.o
ramoops-objs += ram.o ram_core.o
obj-$(CONFIG_PSTORE_RAM) += ramoops.o
.write = pstore_ftrace_knob_write,
};
+static struct dentry *pstore_ftrace_dir;
+
void pstore_register_ftrace(void)
{
- struct dentry *dir;
struct dentry *file;
if (!psinfo->write_buf)
return;
- dir = debugfs_create_dir("pstore", NULL);
- if (!dir) {
+ pstore_ftrace_dir = debugfs_create_dir("pstore", NULL);
+ if (!pstore_ftrace_dir) {
pr_err("%s: unable to create pstore directory\n", __func__);
return;
}
- file = debugfs_create_file("record_ftrace", 0600, dir, NULL,
- &pstore_knob_fops);
+ file = debugfs_create_file("record_ftrace", 0600, pstore_ftrace_dir,
+ NULL, &pstore_knob_fops);
if (!file) {
pr_err("%s: unable to create record_ftrace file\n", __func__);
goto err_file;
return;
err_file:
- debugfs_remove(dir);
+ debugfs_remove(pstore_ftrace_dir);
+}
+
+void pstore_unregister_ftrace(void)
+{
+ mutex_lock(&pstore_ftrace_lock);
+ if (pstore_ftrace_enabled) {
+ unregister_ftrace_function(&pstore_ftrace_ops);
+ pstore_ftrace_enabled = 0;
+ }
+ mutex_unlock(&pstore_ftrace_lock);
+
+ debugfs_remove_recursive(pstore_ftrace_dir);
}
}
static const struct file_operations pstore_file_operations = {
+ .owner = THIS_MODULE,
.open = pstore_file_open,
.read = pstore_file_read,
.llseek = pstore_file_llseek,
static struct super_block *pstore_sb;
-int pstore_is_mounted(void)
+bool pstore_is_mounted(void)
{
return pstore_sb != NULL;
}
}
static struct file_system_type pstore_fs_type = {
+ .owner = THIS_MODULE,
.name = "pstore",
.mount = pstore_mount,
.kill_sb = pstore_kill_sb,
}
module_init(init_pstore_fs)
+static void __exit exit_pstore_fs(void)
+{
+ unregister_filesystem(&pstore_fs_type);
+ sysfs_remove_mount_point(fs_kobj, "pstore");
+}
+module_exit(exit_pstore_fs)
+
MODULE_AUTHOR("Tony Luck <tony.luck@intel.com>");
MODULE_LICENSE("GPL");
#ifdef CONFIG_PSTORE_FTRACE
extern void pstore_register_ftrace(void);
+extern void pstore_unregister_ftrace(void);
#else
static inline void pstore_register_ftrace(void) {}
+static inline void pstore_unregister_ftrace(void) {}
#endif
#ifdef CONFIG_PSTORE_PMSG
extern void pstore_register_pmsg(void);
+extern void pstore_unregister_pmsg(void);
#else
static inline void pstore_register_pmsg(void) {}
+static inline void pstore_unregister_pmsg(void) {}
#endif
extern struct pstore_info *psinfo;
int count, char *data, bool compressed,
size_t size, struct timespec time,
struct pstore_info *psi);
-extern int pstore_is_mounted(void);
+extern bool pstore_is_mounted(void);
#endif
}
+static void free_buf_for_compression(void)
+{
+ kfree(stream.workspace);
+ stream.workspace = NULL;
+ kfree(big_oops_buf);
+ big_oops_buf = NULL;
+}
+
/*
* Called when compression fails, since the printk buffer
* would be fetched for compression calling it again when
.dump = pstore_dump,
};
+static void pstore_register_kmsg(void)
+{
+ kmsg_dump_register(&pstore_dumper);
+}
+
+static void pstore_unregister_kmsg(void)
+{
+ kmsg_dump_unregister(&pstore_dumper);
+}
+
#ifdef CONFIG_PSTORE_CONSOLE
static void pstore_console_write(struct console *con, const char *s, unsigned c)
{
{
register_console(&pstore_console);
}
+
+static void pstore_unregister_console(void)
+{
+ unregister_console(&pstore_console);
+}
#else
static void pstore_register_console(void) {}
+static void pstore_unregister_console(void) {}
#endif
static int pstore_write_compat(enum pstore_type_id type,
if (pstore_is_mounted())
pstore_get_records(0);
- kmsg_dump_register(&pstore_dumper);
+ pstore_register_kmsg();
if ((psi->flags & PSTORE_FLAGS_FRAGILE) == 0) {
pstore_register_console();
*/
backend = psi->name;
+ module_put(owner);
+
pr_info("Registered %s as persistent store backend\n", psi->name);
return 0;
}
EXPORT_SYMBOL_GPL(pstore_register);
+void pstore_unregister(struct pstore_info *psi)
+{
+ pstore_unregister_pmsg();
+ pstore_unregister_ftrace();
+ pstore_unregister_console();
+ pstore_unregister_kmsg();
+
+ free_buf_for_compression();
+
+ psinfo = NULL;
+ backend = NULL;
+}
+EXPORT_SYMBOL_GPL(pstore_unregister);
+
/*
* Read all the records from the persistent store. Create
* files in our filesystem. Don't warn about -EEXIST errors
if (buffer_size > PMSG_MAX_BOUNCE_BUFFER_SIZE)
buffer_size = PMSG_MAX_BOUNCE_BUFFER_SIZE;
buffer = vmalloc(buffer_size);
+ if (!buffer)
+ return -ENOMEM;
mutex_lock(&pmsg_lock);
for (i = 0; i < count; ) {
err:
return;
}
+
+void pstore_unregister_pmsg(void)
+{
+ device_destroy(pmsg_class, MKDEV(pmsg_major, 0));
+ class_destroy(pmsg_class);
+ unregister_chrdev(pmsg_major, PMSG_NAME);
+}
return err;
}
-static int __exit ramoops_remove(struct platform_device *pdev)
+static int ramoops_remove(struct platform_device *pdev)
{
-#if 0
- /* TODO(kees): We cannot unload ramoops since pstore doesn't support
- * unregistering yet.
- */
struct ramoops_context *cxt = &oops_cxt;
- iounmap(cxt->virt_addr);
- release_mem_region(cxt->phys_addr, cxt->size);
+ pstore_unregister(&cxt->pstore);
cxt->max_dump_cnt = 0;
- /* TODO(kees): When pstore supports unregistering, call it here. */
kfree(cxt->pstore.buf);
cxt->pstore.bufsize = 0;
+ persistent_ram_free(cxt->mprz);
+ persistent_ram_free(cxt->fprz);
+ persistent_ram_free(cxt->cprz);
+ ramoops_free_przs(cxt);
+
return 0;
-#endif
- return -EBUSY;
}
static struct platform_driver ramoops_driver = {
.probe = ramoops_probe,
- .remove = __exit_p(ramoops_remove),
+ .remove = ramoops_remove,
.driver = {
.name = "ramoops",
},
unsigned order;
void *data;
int ret;
+ gfp_t gfp = mapping_gfp_mask(inode->i_mapping);
/* make various checks */
order = get_order(newsize);
/* allocate enough contiguous pages to be able to satisfy the
* request */
- pages = alloc_pages(mapping_gfp_mask(inode->i_mapping), order);
+ pages = alloc_pages(gfp, order);
if (!pages)
return -ENOMEM;
struct page *page = pages + loop;
ret = add_to_page_cache_lru(page, inode->i_mapping, loop,
- GFP_KERNEL);
+ gfp);
if (ret < 0)
goto add_error;
}
}
-#define xchg(ptr, x) \
- ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x) ({ \
+ ((__typeof__(*(ptr))) \
+ __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \
+})
#endif /* xchg */
#include <asm-generic/cmpxchg-local.h>
#ifndef cmpxchg_local
-#define cmpxchg_local(ptr, o, n) \
+#define cmpxchg_local(ptr, o, n) ({ \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
+ (unsigned long)(n), sizeof(*(ptr)))); \
+})
#endif
#ifndef cmpxchg64_local
-#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
-#define _ASM_IO_64_NONATOMIC_HI_LO_H_
-
-#include <linux/io.h>
-#include <asm-generic/int-ll64.h>
-
-static inline __u64 hi_lo_readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- high = readl(p + 1);
- low = readl(p);
-
- return low + ((u64)high << 32);
-}
-
-static inline void hi_lo_writeq(__u64 val, volatile void __iomem *addr)
-{
- writel(val >> 32, addr + 4);
- writel(val, addr);
-}
-
-#ifndef readq
-#define readq hi_lo_readq
-#endif
-
-#ifndef writeq
-#define writeq hi_lo_writeq
-#endif
-
-#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
+/* XXX: delete asm-generic/io-64-nonatomic-hi-lo.h after converting new users */
+#include <linux/io-64-nonatomic-hi-lo.h>
-#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
-#define _ASM_IO_64_NONATOMIC_LO_HI_H_
-
-#include <linux/io.h>
-#include <asm-generic/int-ll64.h>
-
-static inline __u64 lo_hi_readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-
-static inline void lo_hi_writeq(__u64 val, volatile void __iomem *addr)
-{
- writel(val, addr);
- writel(val >> 32, addr + 4);
-}
-
-#ifndef readq
-#define readq lo_hi_readq
-#endif
-
-#ifndef writeq
-#define writeq lo_hi_writeq
-#endif
-
-#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
+/* XXX: delete asm-generic/io-64-nonatomic-lo-hi.h after converting new users */
+#include <linux/io-64-nonatomic-lo-hi.h>
#endif
#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty);
+#else
+static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pmd_t *pmdp,
+ pmd_t entry, int dirty)
+{
+ BUILD_BUG();
+ return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
set_pmd_at(vma->vm_mm, address, pmdp, pmd_mkold(pmd));
return r;
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+#else
static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
- BUG();
+ BUILD_BUG();
return 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
-int pmdp_clear_flush_young(struct vm_area_struct *vma,
- unsigned long address, pmd_t *pmdp);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
+ unsigned long address, pmd_t *pmdp);
+#else
+/*
+ * Despite relevant to THP only, this API is called from generic rmap code
+ * under PageTransHuge(), hence needs a dummy implementation for !THP
+ */
+static inline int pmdp_clear_flush_young(struct vm_area_struct *vma,
+ unsigned long address, pmd_t *pmdp)
+{
+ BUILD_BUG();
+ return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
pmd_t old_pmd = *pmdp;
set_pmd_at(mm, address, pmdp, pmd_wrprotect(old_pmd));
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+#else
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
- BUG();
+ BUILD_BUG();
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#else /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
{
- BUG();
+ BUILD_BUG();
return 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
return pmd;
}
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+ return pte;
+}
+
+static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
+{
+ return pmd;
+}
+
static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
{
return pte;
#define put_user(x, ptr) \
({ \
+ void *__p = (ptr); \
might_fault(); \
- access_ok(VERIFY_WRITE, ptr, sizeof(*ptr)) ? \
- __put_user(x, ptr) : \
+ access_ok(VERIFY_WRITE, __p, sizeof(*ptr)) ? \
+ __put_user((x), ((__typeof__(*(ptr)) *)__p)) : \
-EFAULT; \
})
#define get_user(x, ptr) \
({ \
+ const void *__p = (ptr); \
might_fault(); \
- access_ok(VERIFY_READ, ptr, sizeof(*ptr)) ? \
- __get_user(x, ptr) : \
+ access_ok(VERIFY_READ, __p, sizeof(*ptr)) ? \
+ __get_user((x), (__typeof__(*(ptr)) *)__p) : \
-EFAULT; \
})
u8 *bytes;
};
+#define DP_REMOTE_I2C_READ_MAX_TRANSACTIONS 4
struct drm_dp_remote_i2c_read {
u8 num_transactions;
u8 port_number;
u8 *bytes;
u8 no_stop_bit;
u8 i2c_transaction_delay;
- } transactions[4];
+ } transactions[DP_REMOTE_I2C_READ_MAX_TRANSACTIONS];
u8 read_i2c_device_id;
u8 num_bytes_read;
};
--- /dev/null
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define BCM2835_PLLA 0
+#define BCM2835_PLLB 1
+#define BCM2835_PLLC 2
+#define BCM2835_PLLD 3
+#define BCM2835_PLLH 4
+
+#define BCM2835_PLLA_CORE 5
+#define BCM2835_PLLA_PER 6
+#define BCM2835_PLLB_ARM 7
+#define BCM2835_PLLC_CORE0 8
+#define BCM2835_PLLC_CORE1 9
+#define BCM2835_PLLC_CORE2 10
+#define BCM2835_PLLC_PER 11
+#define BCM2835_PLLD_CORE 12
+#define BCM2835_PLLD_PER 13
+#define BCM2835_PLLH_RCAL 14
+#define BCM2835_PLLH_AUX 15
+#define BCM2835_PLLH_PIX 16
+
+#define BCM2835_CLOCK_TIMER 17
+#define BCM2835_CLOCK_OTP 18
+#define BCM2835_CLOCK_UART 19
+#define BCM2835_CLOCK_VPU 20
+#define BCM2835_CLOCK_V3D 21
+#define BCM2835_CLOCK_ISP 22
+#define BCM2835_CLOCK_H264 23
+#define BCM2835_CLOCK_VEC 24
+#define BCM2835_CLOCK_HSM 25
+#define BCM2835_CLOCK_SDRAM 26
+#define BCM2835_CLOCK_TSENS 27
+#define BCM2835_CLOCK_EMMC 28
+#define BCM2835_CLOCK_PERI_IMAGE 29
+
+#define BCM2835_CLOCK_COUNT 30
#define CLKID_SMEMC 24
#define CLKID_PCIE 25
#define CLKID_TWD 26
+#define CLKID_CPU 27
/* mux clocks */
#define CLK_MOUT_HDMI 1024
#define CLK_MOUT_GPLL 1025
+#define CLK_MOUT_ACLK200_DISP1_SUB 1026
+#define CLK_MOUT_ACLK300_DISP1_SUB 1027
/* must be greater than maximal clock id */
-#define CLK_NR_CLKS 1026
+#define CLK_NR_CLKS 1028
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */
#define IMX6QDL_CLK_CAAM_MEM 241
#define IMX6QDL_CLK_CAAM_ACLK 242
#define IMX6QDL_CLK_CAAM_IPG 243
-#define IMX6QDL_CLK_END 244
+#define IMX6QDL_CLK_SPDIF_GCLK 244
+#define IMX6QDL_CLK_END 245
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
#define IMX6SL_CLK_SSI1_IPG 161
#define IMX6SL_CLK_SSI2_IPG 162
#define IMX6SL_CLK_SSI3_IPG 163
-#define IMX6SL_CLK_END 164
+#define IMX6SL_CLK_SPDIF_GCLK 164
+#define IMX6SL_CLK_END 165
#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
#define IMX6SX_PLL5_BYPASS 261
#define IMX6SX_PLL6_BYPASS 262
#define IMX6SX_PLL7_BYPASS 263
-#define IMX6SX_CLK_CLK_END 264
+#define IMX6SX_CLK_SPDIF_GCLK 264
+#define IMX6SX_CLK_CLK_END 265
#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
#define IMX7D_MU_ROOT_CLK 433
#define IMX7D_SEMA4_HS_ROOT_CLK 434
#define IMX7D_PLL_DRAM_TEST_DIV 435
-#define IMX7D_CLK_END 436
+#define IMX7D_ADC_ROOT_CLK 436
+#define IMX7D_CLK_END 437
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--- /dev/null
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
+#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
+
+#define SUN4I_A10_PLL2_1X 0
+#define SUN4I_A10_PLL2_2X 1
+#define SUN4I_A10_PLL2_4X 2
+#define SUN4I_A10_PLL2_8X 3
+
+#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_SNVS 182
#define VF610_CLK_DAP 183
-#define VF610_CLK_END 184
+#define VF610_CLK_OCOTP 184
+#define VF610_CLK_END 185
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--- /dev/null
+#ifndef __DT_BINDINGS_POWER_RK3288_POWER_H__
+#define __DT_BINDINGS_POWER_RK3288_POWER_H__
+
+/**
+ * RK3288 Power Domain and Voltage Domain Summary.
+ */
+
+/* VD_CORE */
+#define RK3288_PD_A17_0 0
+#define RK3288_PD_A17_1 1
+#define RK3288_PD_A17_2 2
+#define RK3288_PD_A17_3 3
+#define RK3288_PD_SCU 4
+#define RK3288_PD_DEBUG 5
+#define RK3288_PD_MEM 6
+
+/* VD_LOGIC */
+#define RK3288_PD_BUS 7
+#define RK3288_PD_PERI 8
+#define RK3288_PD_VIO 9
+#define RK3288_PD_ALIVE 10
+#define RK3288_PD_HEVC 11
+#define RK3288_PD_VIDEO 12
+
+/* VD_GPU */
+#define RK3288_PD_GPU 13
+
+/* VD_PMU */
+#define RK3288_PD_PMU 14
+
+#endif
int (*probe)(struct amba_device *, const struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
- int (*suspend)(struct amba_device *, pm_message_t);
- int (*resume)(struct amba_device *);
const struct amba_id *id_table;
};
const struct atmel_tcb_config *tcb_config;
int irq[3];
struct clk *clk[3];
+ struct clk *slow_clk;
struct list_head node;
bool allocated;
};
struct list_head work_list;
struct delayed_work dwork; /* work item used for writeback */
+ struct list_head bdi_node; /* anchored at bdi->wb_list */
+
#ifdef CONFIG_CGROUP_WRITEBACK
struct percpu_ref refcnt; /* used only for !root wb's */
struct fprop_local_percpu memcg_completions;
atomic_long_t tot_write_bandwidth;
struct bdi_writeback wb; /* the root writeback info for this bdi */
+ struct list_head wb_list; /* list of all wbs */
#ifdef CONFIG_CGROUP_WRITEBACK
struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */
struct rb_root cgwb_congested_tree; /* their congested states */
#include <linux/slab.h>
int __must_check bdi_init(struct backing_dev_info *bdi);
-void bdi_destroy(struct backing_dev_info *bdi);
+void bdi_exit(struct backing_dev_info *bdi);
__printf(3, 4)
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
+void bdi_unregister(struct backing_dev_info *bdi);
+
int __must_check bdi_setup_and_register(struct backing_dev_info *, char *);
+void bdi_destroy(struct backing_dev_info *bdi);
+
void wb_start_writeback(struct bdi_writeback *wb, long nr_pages,
bool range_cyclic, enum wb_reason reason);
void wb_start_background_writeback(struct bdi_writeback *wb);
rcu_read_unlock();
}
-struct wb_iter {
- int start_memcg_id;
- struct radix_tree_iter tree_iter;
- void **slot;
-};
-
-static inline struct bdi_writeback *__wb_iter_next(struct wb_iter *iter,
- struct backing_dev_info *bdi)
-{
- struct radix_tree_iter *titer = &iter->tree_iter;
-
- WARN_ON_ONCE(!rcu_read_lock_held());
-
- if (iter->start_memcg_id >= 0) {
- iter->slot = radix_tree_iter_init(titer, iter->start_memcg_id);
- iter->start_memcg_id = -1;
- } else {
- iter->slot = radix_tree_next_slot(iter->slot, titer, 0);
- }
-
- if (!iter->slot)
- iter->slot = radix_tree_next_chunk(&bdi->cgwb_tree, titer, 0);
- if (iter->slot)
- return *iter->slot;
- return NULL;
-}
-
-static inline struct bdi_writeback *__wb_iter_init(struct wb_iter *iter,
- struct backing_dev_info *bdi,
- int start_memcg_id)
-{
- iter->start_memcg_id = start_memcg_id;
-
- if (start_memcg_id)
- return __wb_iter_next(iter, bdi);
- else
- return &bdi->wb;
-}
-
-/**
- * bdi_for_each_wb - walk all wb's of a bdi in ascending memcg ID order
- * @wb_cur: cursor struct bdi_writeback pointer
- * @bdi: bdi to walk wb's of
- * @iter: pointer to struct wb_iter to be used as iteration buffer
- * @start_memcg_id: memcg ID to start iteration from
- *
- * Iterate @wb_cur through the wb's (bdi_writeback's) of @bdi in ascending
- * memcg ID order starting from @start_memcg_id. @iter is struct wb_iter
- * to be used as temp storage during iteration. rcu_read_lock() must be
- * held throughout iteration.
- */
-#define bdi_for_each_wb(wb_cur, bdi, iter, start_memcg_id) \
- for ((wb_cur) = __wb_iter_init(iter, bdi, start_memcg_id); \
- (wb_cur); (wb_cur) = __wb_iter_next(iter, bdi))
-
#else /* CONFIG_CGROUP_WRITEBACK */
static inline bool inode_cgwb_enabled(struct inode *inode)
{
}
-struct wb_iter {
- int next_id;
-};
-
-#define bdi_for_each_wb(wb_cur, bdi, iter, start_blkcg_id) \
- for ((iter)->next_id = (start_blkcg_id); \
- ({ (wb_cur) = !(iter)->next_id++ ? &(bdi)->wb : NULL; }); )
-
static inline int inode_congested(struct inode *inode, int cong_bits)
{
return wb_congested(&inode_to_bdi(inode)->wb, cong_bits);
if (!throtl) {
blkg = blkg ?: q->root_blkg;
- blkg_rwstat_add(&blkg->stat_bytes, bio->bi_flags,
+ blkg_rwstat_add(&blkg->stat_bytes, bio->bi_rw,
bio->bi_iter.bi_size);
- blkg_rwstat_add(&blkg->stat_ios, bio->bi_flags, 1);
+ blkg_rwstat_add(&blkg->stat_ios, bio->bi_rw, 1);
}
rcu_read_unlock();
void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
u8 clk_divider_flags, spinlock_t *lock);
+/**
+ * struct clk_multiplier - adjustable multiplier clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing the multiplier
+ * @shift: shift to the multiplier bit field
+ * @width: width of the multiplier bit field
+ * @lock: register lock
+ *
+ * Clock with an adjustable multiplier affecting its output frequency.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ *
+ * Flags:
+ * CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read
+ * from the register, with 0 being a valid value effectively
+ * zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is
+ * set, then a null multiplier will be considered as a bypass,
+ * leaving the parent rate unmodified.
+ * CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be
+ * rounded to the closest integer instead of the down one.
+ */
+struct clk_multiplier {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+#define CLK_MULTIPLIER_ZERO_BYPASS BIT(0)
+#define CLK_MULTIPLIER_ROUND_CLOSEST BIT(1)
+
+extern const struct clk_ops clk_multiplier_ops;
+
+struct clk *clk_register_multiplier(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mult_flags, spinlock_t *lock);
+void clk_unregister_multiplier(struct clk *clk);
+
/***
* struct clk_composite - aggregate clock of mux, divider and gate clocks
*
extern int cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
unsigned int order_per_bit,
struct cma **res_cma);
-extern struct page *cma_alloc(struct cma *cma, unsigned int count, unsigned int align);
+extern struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align);
extern bool cma_release(struct cma *cma, const struct page *pages, unsigned int count);
#endif
#define KASAN_ABI_VERSION 3
#endif
+#if GCC_VERSION >= 40902
+/*
+ * Tell the compiler that address safety instrumentation (KASAN)
+ * should not be applied to that function.
+ * Conflicts with inlining: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ */
+#define __no_sanitize_address __attribute__((no_sanitize_address))
+#endif
+
#endif /* gcc version >= 40000 specific checks */
#if !defined(__noclone)
#define __noclone /* not needed */
#endif
+#if !defined(__no_sanitize_address)
+#define __no_sanitize_address
+#endif
+
/*
* A trick to suppress uninitialized variable warning without generating any
* code
#include <linux/compiler-gcc.h>
#endif
-#ifdef CC_USING_HOTPATCH
+#if defined(CC_USING_HOTPATCH) && !defined(__CHECKER__)
#define notrace __attribute__((hotpatch(0,0)))
#else
#define notrace __attribute__((no_instrument_function))
#include <uapi/linux/types.h>
-static __always_inline void __read_once_size(const volatile void *p, void *res, int size)
+#define __READ_ONCE_SIZE \
+({ \
+ switch (size) { \
+ case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \
+ case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \
+ case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \
+ case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \
+ default: \
+ barrier(); \
+ __builtin_memcpy((void *)res, (const void *)p, size); \
+ barrier(); \
+ } \
+})
+
+static __always_inline
+void __read_once_size(const volatile void *p, void *res, int size)
{
- switch (size) {
- case 1: *(__u8 *)res = *(volatile __u8 *)p; break;
- case 2: *(__u16 *)res = *(volatile __u16 *)p; break;
- case 4: *(__u32 *)res = *(volatile __u32 *)p; break;
- case 8: *(__u64 *)res = *(volatile __u64 *)p; break;
- default:
- barrier();
- __builtin_memcpy((void *)res, (const void *)p, size);
- barrier();
- }
+ __READ_ONCE_SIZE;
+}
+
+#ifdef CONFIG_KASAN
+/*
+ * This function is not 'inline' because __no_sanitize_address confilcts
+ * with inlining. Attempt to inline it may cause a build failure.
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ * '__maybe_unused' allows us to avoid defined-but-not-used warnings.
+ */
+static __no_sanitize_address __maybe_unused
+void __read_once_size_nocheck(const volatile void *p, void *res, int size)
+{
+ __READ_ONCE_SIZE;
+}
+#else
+static __always_inline
+void __read_once_size_nocheck(const volatile void *p, void *res, int size)
+{
+ __READ_ONCE_SIZE;
}
+#endif
static __always_inline void __write_once_size(volatile void *p, void *res, int size)
{
* required ordering.
*/
-#define READ_ONCE(x) \
- ({ union { typeof(x) __val; char __c[1]; } __u; __read_once_size(&(x), __u.__c, sizeof(x)); __u.__val; })
+#define __READ_ONCE(x, check) \
+({ \
+ union { typeof(x) __val; char __c[1]; } __u; \
+ if (check) \
+ __read_once_size(&(x), __u.__c, sizeof(x)); \
+ else \
+ __read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \
+ __u.__val; \
+})
+#define READ_ONCE(x) __READ_ONCE(x, 1)
+
+/*
+ * Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need
+ * to hide memory access from KASAN.
+ */
+#define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0)
#define WRITE_ONCE(x, val) \
({ \
* 2 of the Licence, or (at your option) any later version.
*/
-#ifndef _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_
-#define _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_
+#ifndef _LINUX_BITOPS_COUNT_ZEROS_H_
+#define _LINUX_BITOPS_COUNT_ZEROS_H_
#include <asm/bitops.h>
return (x != 0) ? __ffs(x) : COUNT_TRAILING_ZEROS_0;
}
-#endif /* _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_ */
+#endif /* _LINUX_BITOPS_COUNT_ZEROS_H_ */
return ret;
}
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int order);
bool dma_release_from_contiguous(struct device *dev, struct page *pages,
int count);
}
static inline
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int order)
{
return NULL;
* option) any later version.
*/
-#ifndef __ASM_POWERPC_FSL_GUTS_H__
-#define __ASM_POWERPC_FSL_GUTS_H__
-#ifdef __KERNEL__
+#ifndef __FSL_GUTS_H__
+#define __FSL_GUTS_H__
+
+#include <linux/types.h>
/**
* Global Utility Registers.
#endif
#endif
-#endif
--- /dev/null
+#ifndef _LINUX_IO_64_NONATOMIC_HI_LO_H_
+#define _LINUX_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+static inline __u64 hi_lo_readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ high = readl(p + 1);
+ low = readl(p);
+
+ return low + ((u64)high << 32);
+}
+
+static inline void hi_lo_writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val >> 32, addr + 4);
+ writel(val, addr);
+}
+
+#ifndef readq
+#define readq hi_lo_readq
+#endif
+
+#ifndef writeq
+#define writeq hi_lo_writeq
+#endif
+
+#endif /* _LINUX_IO_64_NONATOMIC_HI_LO_H_ */
--- /dev/null
+#ifndef _LINUX_IO_64_NONATOMIC_LO_HI_H_
+#define _LINUX_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+static inline __u64 lo_hi_readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ low = readl(p);
+ high = readl(p + 1);
+
+ return low + ((u64)high << 32);
+}
+
+static inline void lo_hi_writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+
+#ifndef readq
+#define readq lo_hi_readq
+#endif
+
+#ifndef writeq
+#define writeq lo_hi_writeq
+#endif
+
+#endif /* _LINUX_IO_64_NONATOMIC_LO_HI_H_ */
const struct cpumask *cpumask, bool force);
extern int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info);
+extern void irq_migrate_all_off_this_cpu(void);
+
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
void irq_move_irq(struct irq_data *data);
void irq_move_masked_irq(struct irq_data *data);
#define __LINUX_IRQCHIP_MIPS_GIC_H
#include <linux/clocksource.h>
+#include <linux/ioport.h>
#define GIC_MAX_INTRS 256
#define GIC_SHARED_TO_HWIRQ(x) (GIC_SHARED_HWIRQ_BASE + (x))
#define GIC_HWIRQ_TO_SHARED(x) ((x) - GIC_SHARED_HWIRQ_BASE)
+#ifdef CONFIG_MIPS_GIC
+
extern unsigned int gic_present;
extern void gic_init(unsigned long gic_base_addr,
extern int gic_get_c0_compare_int(void);
extern int gic_get_c0_perfcount_int(void);
extern int gic_get_c0_fdc_int(void);
+extern int gic_get_usm_range(struct resource *gic_usm_res);
+
+#else /* CONFIG_MIPS_GIC */
+
+#define gic_present 0
+
+static inline int gic_get_usm_range(struct resource *gic_usm_res)
+{
+ /* Shouldn't be called. */
+ return -1;
+}
+
+#endif /* CONFIG_MIPS_GIC */
+
#endif /* __LINUX_IRQCHIP_MIPS_GIC_H */
IRQ_DOMAIN_FLAG_NONCORE = (1 << 16),
};
+static inline struct device_node *irq_domain_get_of_node(struct irq_domain *d)
+{
+ return d->of_node;
+}
+
#ifdef CONFIG_IRQ_DOMAIN
struct irq_domain *__irq_domain_add(struct device_node *of_node, int size,
irq_hw_number_t hwirq_max, int direct_max,
/* 0x0400 */
} journal_superblock_t;
+/* Use the jbd2_{has,set,clear}_feature_* helpers; these will be removed */
#define JBD2_HAS_COMPAT_FEATURE(j,mask) \
((j)->j_format_version >= 2 && \
((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
((j)->j_format_version >= 2 && \
((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
-#define JBD2_FEATURE_COMPAT_CHECKSUM 0x00000001
+#define JBD2_FEATURE_COMPAT_CHECKSUM 0x00000001
#define JBD2_FEATURE_INCOMPAT_REVOKE 0x00000001
#define JBD2_FEATURE_INCOMPAT_64BIT 0x00000002
#define JBD2_FEATURE_INCOMPAT_CSUM_V2 0x00000008
#define JBD2_FEATURE_INCOMPAT_CSUM_V3 0x00000010
+/* See "journal feature predicate functions" below */
+
/* Features known to this kernel version: */
#define JBD2_KNOWN_COMPAT_FEATURES JBD2_FEATURE_COMPAT_CHECKSUM
#define JBD2_KNOWN_ROCOMPAT_FEATURES 0
__u32 j_csum_seed;
};
+/* journal feature predicate functions */
+#define JBD2_FEATURE_COMPAT_FUNCS(name, flagname) \
+static inline bool jbd2_has_feature_##name(journal_t *j) \
+{ \
+ return ((j)->j_format_version >= 2 && \
+ ((j)->j_superblock->s_feature_compat & \
+ cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname)) != 0); \
+} \
+static inline void jbd2_set_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_compat |= \
+ cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname); \
+} \
+static inline void jbd2_clear_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_compat &= \
+ ~cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname); \
+}
+
+#define JBD2_FEATURE_RO_COMPAT_FUNCS(name, flagname) \
+static inline bool jbd2_has_feature_##name(journal_t *j) \
+{ \
+ return ((j)->j_format_version >= 2 && \
+ ((j)->j_superblock->s_feature_ro_compat & \
+ cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname)) != 0); \
+} \
+static inline void jbd2_set_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_ro_compat |= \
+ cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname); \
+} \
+static inline void jbd2_clear_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_ro_compat &= \
+ ~cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname); \
+}
+
+#define JBD2_FEATURE_INCOMPAT_FUNCS(name, flagname) \
+static inline bool jbd2_has_feature_##name(journal_t *j) \
+{ \
+ return ((j)->j_format_version >= 2 && \
+ ((j)->j_superblock->s_feature_incompat & \
+ cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname)) != 0); \
+} \
+static inline void jbd2_set_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_incompat |= \
+ cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname); \
+} \
+static inline void jbd2_clear_feature_##name(journal_t *j) \
+{ \
+ (j)->j_superblock->s_feature_incompat &= \
+ ~cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname); \
+}
+
+JBD2_FEATURE_COMPAT_FUNCS(checksum, CHECKSUM)
+
+JBD2_FEATURE_INCOMPAT_FUNCS(revoke, REVOKE)
+JBD2_FEATURE_INCOMPAT_FUNCS(64bit, 64BIT)
+JBD2_FEATURE_INCOMPAT_FUNCS(async_commit, ASYNC_COMMIT)
+JBD2_FEATURE_INCOMPAT_FUNCS(csum2, CSUM_V2)
+JBD2_FEATURE_INCOMPAT_FUNCS(csum3, CSUM_V3)
+
/*
* Journal flag definitions
*/
#define JBD2_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file
* data write error in ordered
* mode */
+#define JBD2_REC_ERR 0x080 /* The errno in the sb has been recorded */
/*
* Function declarations for the journaling transaction and buffer
extern int jbd2_journal_blocks_per_page(struct inode *inode);
extern size_t journal_tag_bytes(journal_t *journal);
+static inline bool jbd2_journal_has_csum_v2or3_feature(journal_t *j)
+{
+ return jbd2_has_feature_csum2(j) || jbd2_has_feature_csum3(j);
+}
+
static inline int jbd2_journal_has_csum_v2or3(journal_t *journal)
{
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) ||
- JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3))
- return 1;
+ WARN_ON_ONCE(jbd2_journal_has_csum_v2or3_feature(journal) &&
+ journal->j_chksum_driver == NULL);
- return 0;
+ return journal->j_chksum_driver != NULL;
}
/*
#endif /* __KERNEL__ */
+#define EFSBADCRC EBADMSG /* Bad CRC detected */
+#define EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
+
#endif /* _LINUX_JBD2_H */
struct list_head *mem_cgroup_cgwb_list(struct mem_cgroup *memcg);
struct wb_domain *mem_cgroup_wb_domain(struct bdi_writeback *wb);
-void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pavail,
- unsigned long *pdirty, unsigned long *pwriteback);
+void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pfilepages,
+ unsigned long *pheadroom, unsigned long *pdirty,
+ unsigned long *pwriteback);
#else /* CONFIG_CGROUP_WRITEBACK */
}
static inline void mem_cgroup_wb_stats(struct bdi_writeback *wb,
- unsigned long *pavail,
+ unsigned long *pfilepages,
+ unsigned long *pheadroom,
unsigned long *pdirty,
unsigned long *pwriteback)
{
--- /dev/null
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IMX7_IOMUXC_GPR_H
+#define __LINUX_IMX7_IOMUXC_GPR_H
+
+#define IOMUXC_GPR0 0x00
+#define IOMUXC_GPR1 0x04
+#define IOMUXC_GPR2 0x08
+#define IOMUXC_GPR3 0x0c
+#define IOMUXC_GPR4 0x10
+#define IOMUXC_GPR5 0x14
+#define IOMUXC_GPR6 0x18
+#define IOMUXC_GPR7 0x1c
+#define IOMUXC_GPR8 0x20
+#define IOMUXC_GPR9 0x24
+#define IOMUXC_GPR10 0x28
+#define IOMUXC_GPR11 0x2c
+#define IOMUXC_GPR12 0x30
+#define IOMUXC_GPR13 0x34
+#define IOMUXC_GPR14 0x38
+#define IOMUXC_GPR15 0x3c
+#define IOMUXC_GPR16 0x40
+#define IOMUXC_GPR17 0x44
+#define IOMUXC_GPR18 0x48
+#define IOMUXC_GPR19 0x4c
+#define IOMUXC_GPR20 0x50
+#define IOMUXC_GPR21 0x54
+#define IOMUXC_GPR22 0x58
+
+/* For imx7d iomux gpr register field define */
+#define IMX7D_GPR1_IRQ_MASK (0x1 << 12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK (0x1 << 13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK (0x1 << 14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK (0x1 << 17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK (0x1 << 18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI (0x1 << 4)
+
+#endif /* __LINUX_IMX7_IOMUXC_GPR_H */
u16 queues[0];
};
#define XPS_MAP_SIZE(_num) (sizeof(struct xps_map) + ((_num) * sizeof(u16)))
-#define XPS_MIN_MAP_ALLOC ((L1_CACHE_BYTES - sizeof(struct xps_map)) \
- / sizeof(u16))
+#define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
+ - sizeof(struct xps_map)) / sizeof(u16))
/*
* This structure holds all XPS maps for device. Maps are indexed by CPU.
* This function is used to pass protocol port error state information
* to the switch driver. The switch driver can react to the proto_down
* by doing a phys down on the associated switch port.
+ * int (*ndo_fill_metadata_dst)(struct net_device *dev, struct sk_buff *skb);
+ * This function is used to get egress tunnel information for given skb.
+ * This is useful for retrieving outer tunnel header parameters while
+ * sampling packet.
*
*/
struct net_device_ops {
int (*ndo_get_iflink)(const struct net_device *dev);
int (*ndo_change_proto_down)(struct net_device *dev,
bool proto_down);
+ int (*ndo_fill_metadata_dst)(struct net_device *dev,
+ struct sk_buff *skb);
};
/**
void dev_remove_offload(struct packet_offload *po);
int dev_get_iflink(const struct net_device *dev);
+int dev_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb);
struct net_device *__dev_get_by_flags(struct net *net, unsigned short flags,
unsigned short mask);
struct net_device *dev_get_by_name(struct net *net, const char *name);
#include <linux/platform_device.h>
-#define INT_DMA_LCD 25
+#define INT_DMA_LCD (NR_IRQS_LEGACY + 25)
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1
bool psci_tos_resident_on(int cpu);
+bool psci_power_state_loses_context(u32 state);
+bool psci_power_state_is_valid(u32 state);
struct psci_operations {
int (*cpu_suspend)(u32 state, unsigned long entry_point);
#define PSTORE_FLAGS_FRAGILE 1
-#ifdef CONFIG_PSTORE
extern int pstore_register(struct pstore_info *);
+extern void pstore_unregister(struct pstore_info *);
extern bool pstore_cannot_block_path(enum kmsg_dump_reason reason);
-#else
-static inline int
-pstore_register(struct pstore_info *psi)
-{
- return -ENODEV;
-}
-static inline bool
-pstore_cannot_block_path(enum kmsg_dump_reason reason)
-{
- return false;
-}
-#endif
#endif /*_LINUX_PSTORE_H*/
u32 val;
};
+extern bool qcom_scm_is_available(void);
+
extern bool qcom_scm_hdcp_available(void);
extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
+extern bool qcom_scm_pas_supported(u32 peripheral);
+extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size);
+extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size);
+extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
+extern int qcom_scm_pas_shutdown(u32 peripheral);
+
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
--- /dev/null
+/*
+ * SCPI Message Protocol driver header
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+
+struct scpi_opp {
+ u32 freq;
+ u32 m_volt;
+} __packed;
+
+struct scpi_dvfs_info {
+ unsigned int count;
+ unsigned int latency; /* in nanoseconds */
+ struct scpi_opp *opps;
+};
+
+enum scpi_sensor_class {
+ TEMPERATURE,
+ VOLTAGE,
+ CURRENT,
+ POWER,
+};
+
+struct scpi_sensor_info {
+ u16 sensor_id;
+ u8 class;
+ u8 trigger_type;
+ char name[20];
+} __packed;
+
+/**
+ * struct scpi_ops - represents the various operations provided
+ * by SCP through SCPI message protocol
+ * @get_version: returns the major and minor revision on the SCPI
+ * message protocol
+ * @clk_get_range: gets clock range limit(min - max in Hz)
+ * @clk_get_val: gets clock value(in Hz)
+ * @clk_set_val: sets the clock value, setting to 0 will disable the
+ * clock (if supported)
+ * @dvfs_get_idx: gets the Operating Point of the given power domain.
+ * OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_set_idx: sets the Operating Point of the given power domain.
+ * OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_get_info: returns the DVFS capabilities of the given power
+ * domain. It includes the OPP list and the latency information
+ */
+struct scpi_ops {
+ u32 (*get_version)(void);
+ int (*clk_get_range)(u16, unsigned long *, unsigned long *);
+ unsigned long (*clk_get_val)(u16);
+ int (*clk_set_val)(u16, unsigned long);
+ int (*dvfs_get_idx)(u8);
+ int (*dvfs_set_idx)(u8, u8);
+ struct scpi_dvfs_info *(*dvfs_get_info)(u8);
+ int (*sensor_get_capability)(u16 *sensors);
+ int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
+ int (*sensor_get_value)(u16, u32 *);
+};
+
+#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL)
+struct scpi_ops *get_scpi_ops(void);
+#else
+static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }
+#endif
--- /dev/null
+#ifndef __BRCMSTB_SOC_H
+#define __BRCMSTB_SOC_H
+
+/*
+ * Bus Interface Unit control register setup, must happen early during boot,
+ * before SMP is brought up, called by machine entry point.
+ */
+void brcmstb_biuctrl_init(void);
+
+#endif /* __BRCMSTB_SOC_H */
struct qcom_smd_channel;
struct qcom_smd_lookup;
+/**
+ * struct qcom_smd_id - struct used for matching a smd device
+ * @name: name of the channel
+ */
+struct qcom_smd_id {
+ char name[20];
+};
+
/**
* struct qcom_smd_device - smd device struct
* @dev: the device struct
/**
* struct qcom_smd_driver - smd driver struct
* @driver: underlying device driver
+ * @smd_match_table: static channel match table
* @probe: invoked when the smd channel is found
* @remove: invoked when the smd channel is closed
* @callback: invoked when an inbound message is received on the channel,
*/
struct qcom_smd_driver {
struct device_driver driver;
+ const struct qcom_smd_id *smd_match_table;
+
int (*probe)(struct qcom_smd_device *dev);
void (*remove)(struct qcom_smd_device *dev);
int (*callback)(struct qcom_smd_device *, const void *, size_t);
#define QCOM_SMEM_HOST_ANY -1
int qcom_smem_alloc(unsigned host, unsigned item, size_t size);
-int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size);
+void *qcom_smem_get(unsigned host, unsigned item, size_t *size);
int qcom_smem_get_free_space(unsigned host);
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
- u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
--- /dev/null
+/*
+ * Allwinner Reduced Serial Bus Driver
+ *
+ * Copyright (c) 2015 Chen-Yu Tsai
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _SUNXI_RSB_H
+#define _SUNXI_RSB_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct sunxi_rsb;
+
+/**
+ * struct sunxi_rsb_device - Basic representation of an RSB device
+ * @dev: Driver model representation of the device.
+ * @ctrl: RSB controller managing the bus hosting this device.
+ * @rtaddr: This device's runtime address
+ * @hwaddr: This device's hardware address
+ */
+struct sunxi_rsb_device {
+ struct device dev;
+ struct sunxi_rsb *rsb;
+ int irq;
+ u8 rtaddr;
+ u16 hwaddr;
+};
+
+static inline struct sunxi_rsb_device *to_sunxi_rsb_device(struct device *d)
+{
+ return container_of(d, struct sunxi_rsb_device, dev);
+}
+
+static inline void *sunxi_rsb_device_get_drvdata(const struct sunxi_rsb_device *rdev)
+{
+ return dev_get_drvdata(&rdev->dev);
+}
+
+static inline void sunxi_rsb_device_set_drvdata(struct sunxi_rsb_device *rdev,
+ void *data)
+{
+ dev_set_drvdata(&rdev->dev, data);
+}
+
+/**
+ * struct sunxi_rsb_driver - RSB slave device driver
+ * @driver: RSB device drivers should initialize name and owner field of
+ * this structure.
+ * @probe: binds this driver to a RSB device.
+ * @remove: unbinds this driver from the RSB device.
+ */
+struct sunxi_rsb_driver {
+ struct device_driver driver;
+ int (*probe)(struct sunxi_rsb_device *rdev);
+ int (*remove)(struct sunxi_rsb_device *rdev);
+};
+
+static inline struct sunxi_rsb_driver *to_sunxi_rsb_driver(struct device_driver *d)
+{
+ return container_of(d, struct sunxi_rsb_driver, driver);
+}
+
+int sunxi_rsb_driver_register(struct sunxi_rsb_driver *rdrv);
+
+/**
+ * sunxi_rsb_driver_unregister() - unregister an RSB client driver
+ * @rdrv: the driver to unregister
+ */
+static inline void sunxi_rsb_driver_unregister(struct sunxi_rsb_driver *rdrv)
+{
+ if (rdrv)
+ driver_unregister(&rdrv->driver);
+}
+
+#define module_sunxi_rsb_driver(__sunxi_rsb_driver) \
+ module_driver(__sunxi_rsb_driver, sunxi_rsb_driver_register, \
+ sunxi_rsb_driver_unregister)
+
+struct regmap *__devm_regmap_init_sunxi_rsb(struct sunxi_rsb_device *rdev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
+
+/**
+ * devm_regmap_init_sunxi_rsb(): Initialise managed register map
+ *
+ * @rdev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sunxi_rsb(rdev, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_sunxi_rsb, #config, \
+ rdev, config)
+
+#endif /* _SUNXI_RSB_H */
*/
int pio_dma_border; /* default is 64byte */
- u32 type;
+ uintptr_t type;
u32 enable_gpio;
/*
struct socket_wq peer_wq;
};
-static inline struct unix_sock *unix_sk(struct sock *sk)
+static inline struct unix_sock *unix_sk(const struct sock *sk)
{
return (struct unix_sock *)sk;
}
return tun_dst;
}
+static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
+{
+ struct metadata_dst *md_dst = skb_metadata_dst(skb);
+ int md_size = md_dst->u.tun_info.options_len;
+ struct metadata_dst *new_md;
+
+ if (!md_dst)
+ return ERR_PTR(-EINVAL);
+
+ new_md = metadata_dst_alloc(md_size, GFP_ATOMIC);
+ if (!new_md)
+ return ERR_PTR(-ENOMEM);
+
+ memcpy(&new_md->u.tun_info, &md_dst->u.tun_info,
+ sizeof(struct ip_tunnel_info) + md_size);
+ skb_dst_drop(skb);
+ dst_hold(&new_md->dst);
+ skb_dst_set(skb, &new_md->dst);
+ return new_md;
+}
+
+static inline struct ip_tunnel_info *skb_tunnel_info_unclone(struct sk_buff *skb)
+{
+ struct metadata_dst *dst;
+
+ dst = tun_dst_unclone(skb);
+ if (IS_ERR(dst))
+ return NULL;
+
+ return &dst->u.tun_info;
+}
+
static inline struct metadata_dst *ip_tun_rx_dst(struct sk_buff *skb,
__be16 flags,
__be64 tunnel_id,
void __inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo,
bool rearm);
-static void inline inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo)
+static inline void inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo)
{
__inet_twsk_schedule(tw, timeo, false);
}
-static void inline inet_twsk_reschedule(struct inet_timewait_sock *tw, int timeo)
+static inline void inet_twsk_reschedule(struct inet_timewait_sock *tw, int timeo)
{
__inet_twsk_schedule(tw, timeo, true);
}
if (sk_rcvqueues_full(sk, limit))
return -ENOBUFS;
+ /*
+ * If the skb was allocated from pfmemalloc reserves, only
+ * allow SOCK_MEMALLOC sockets to use it as this socket is
+ * helping free memory
+ */
+ if (skb_pfmemalloc(skb) && !sock_flag(sk, SOCK_MEMALLOC))
+ return -ENOMEM;
+
__sk_add_backlog(sk, skb);
sk->sk_backlog.len += skb->truesize;
return 0;
--- /dev/null
+/*
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_RASPBERRY_FIRMWARE_H__
+#define __SOC_RASPBERRY_FIRMWARE_H__
+
+#include <linux/types.h>
+#include <linux/of_device.h>
+
+struct rpi_firmware;
+
+enum rpi_firmware_property_status {
+ RPI_FIRMWARE_STATUS_REQUEST = 0,
+ RPI_FIRMWARE_STATUS_SUCCESS = 0x80000000,
+ RPI_FIRMWARE_STATUS_ERROR = 0x80000001,
+};
+
+/**
+ * struct rpi_firmware_property_tag_header - Firmware property tag header
+ * @tag: One of enum_mbox_property_tag.
+ * @buf_size: The number of bytes in the value buffer following this
+ * struct.
+ * @req_resp_size: On submit, the length of the request (though it doesn't
+ * appear to be currently used by the firmware). On return,
+ * the length of the response (always 4 byte aligned), with
+ * the low bit set.
+ */
+struct rpi_firmware_property_tag_header {
+ u32 tag;
+ u32 buf_size;
+ u32 req_resp_size;
+};
+
+enum rpi_firmware_property_tag {
+ RPI_FIRMWARE_PROPERTY_END = 0,
+ RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001,
+
+ RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010,
+ RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011,
+
+ RPI_FIRMWARE_GET_BOARD_MODEL = 0x00010001,
+ RPI_FIRMWARE_GET_BOARD_REVISION = 0x00010002,
+ RPI_FIRMWARE_GET_BOARD_MAC_ADDRESS = 0x00010003,
+ RPI_FIRMWARE_GET_BOARD_SERIAL = 0x00010004,
+ RPI_FIRMWARE_GET_ARM_MEMORY = 0x00010005,
+ RPI_FIRMWARE_GET_VC_MEMORY = 0x00010006,
+ RPI_FIRMWARE_GET_CLOCKS = 0x00010007,
+ RPI_FIRMWARE_GET_POWER_STATE = 0x00020001,
+ RPI_FIRMWARE_GET_TIMING = 0x00020002,
+ RPI_FIRMWARE_SET_POWER_STATE = 0x00028001,
+ RPI_FIRMWARE_GET_CLOCK_STATE = 0x00030001,
+ RPI_FIRMWARE_GET_CLOCK_RATE = 0x00030002,
+ RPI_FIRMWARE_GET_VOLTAGE = 0x00030003,
+ RPI_FIRMWARE_GET_MAX_CLOCK_RATE = 0x00030004,
+ RPI_FIRMWARE_GET_MAX_VOLTAGE = 0x00030005,
+ RPI_FIRMWARE_GET_TEMPERATURE = 0x00030006,
+ RPI_FIRMWARE_GET_MIN_CLOCK_RATE = 0x00030007,
+ RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008,
+ RPI_FIRMWARE_GET_TURBO = 0x00030009,
+ RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c,
+ RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d,
+ RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e,
+ RPI_FIRMWARE_RELEASE_MEMORY = 0x0003000f,
+ RPI_FIRMWARE_EXECUTE_CODE = 0x00030010,
+ RPI_FIRMWARE_EXECUTE_QPU = 0x00030011,
+ RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012,
+ RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
+ RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
+ RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
+ RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
+ RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
+ RPI_FIRMWARE_SET_TURBO = 0x00038009,
+
+ /* Dispmanx TAGS */
+ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
+ RPI_FIRMWARE_FRAMEBUFFER_BLANK = 0x00040002,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_DEPTH = 0x00040005,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_PIXEL_ORDER = 0x00040006,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_ALPHA_MODE = 0x00040007,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH = 0x00040008,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_PIXEL_ORDER = 0x00044006,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_ALPHA_MODE = 0x00044007,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+
+ RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001,
+ RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001,
+};
+
+int rpi_firmware_property(struct rpi_firmware *fw,
+ u32 tag, void *data, size_t len);
+int rpi_firmware_property_list(struct rpi_firmware *fw,
+ void *data, size_t tag_size);
+struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
+
+#endif /* __SOC_RASPBERRY_FIRMWARE_H__ */
--- /dev/null
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_BRCMSTB_COMMON_H__
+#define __SOC_BRCMSTB_COMMON_H__
+
+bool soc_is_brcmstb(void);
+
+#endif /* __SOC_BRCMSTB_COMMON_H__ */
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array),\
- .info = snd_soc_info_volsw, \
+ .info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx,\
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw, \
+ .info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx, \
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
struct snd_ctl_elem_value *ucontrol);
int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
+int snd_soc_info_volsw_sx(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo);
#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info
int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
#define WM8904_MIC_REGS 2
#define WM8904_GPIO_REGS 4
#define WM8904_DRC_REGS 4
-#define WM8904_EQ_REGS 25
+#define WM8904_EQ_REGS 24
/**
* DRC configurations are specified with a label and a set of register
__entry->ret)
);
+TRACE_EVENT(f2fs_background_gc,
+
+ TP_PROTO(struct super_block *sb, long wait_ms,
+ unsigned int prefree, unsigned int free),
+
+ TP_ARGS(sb, wait_ms, prefree, free),
+
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(long, wait_ms)
+ __field(unsigned int, prefree)
+ __field(unsigned int, free)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sb->s_dev;
+ __entry->wait_ms = wait_ms;
+ __entry->prefree = prefree;
+ __entry->free = free;
+ ),
+
+ TP_printk("dev = (%d,%d), wait_ms = %ld, prefree = %u, free = %u",
+ show_dev(__entry),
+ __entry->wait_ms,
+ __entry->prefree,
+ __entry->free)
+);
+
TRACE_EVENT(f2fs_get_victim,
TP_PROTO(struct super_block *sb, int type, int gc_type,
__entry->for_sync)
);
+TRACE_EVENT(f2fs_readpages,
+
+ TP_PROTO(struct inode *inode, struct page *page, unsigned int nrpage),
+
+ TP_ARGS(inode, page, nrpage),
+
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(ino_t, ino)
+ __field(pgoff_t, start)
+ __field(unsigned int, nrpage)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->start = page->index;
+ __entry->nrpage = nrpage;
+ ),
+
+ TP_printk("dev = (%d,%d), ino = %lu, start = %lu nrpage = %u",
+ show_dev_ino(__entry),
+ (unsigned long)__entry->start,
+ __entry->nrpage)
+);
+
TRACE_EVENT(f2fs_write_checkpoint,
TP_PROTO(struct super_block *sb, int reason, char *msg),
__entry->len)
);
-TRACE_EVENT(f2fs_update_extent_tree,
+TRACE_EVENT(f2fs_update_extent_tree_range,
- TP_PROTO(struct inode *inode, unsigned int pgofs, block_t blkaddr),
+ TP_PROTO(struct inode *inode, unsigned int pgofs, block_t blkaddr,
+ unsigned int len),
- TP_ARGS(inode, pgofs, blkaddr),
+ TP_ARGS(inode, pgofs, blkaddr, len),
TP_STRUCT__entry(
__field(dev_t, dev)
__field(ino_t, ino)
__field(unsigned int, pgofs)
__field(u32, blk)
+ __field(unsigned int, len)
),
TP_fast_assign(
__entry->ino = inode->i_ino;
__entry->pgofs = pgofs;
__entry->blk = blkaddr;
+ __entry->len = len;
),
- TP_printk("dev = (%d,%d), ino = %lu, pgofs = %u, blkaddr = %u",
+ TP_printk("dev = (%d,%d), ino = %lu, pgofs = %u, "
+ "blkaddr = %u, len = %u",
show_dev_ino(__entry),
__entry->pgofs,
- __entry->blk)
+ __entry->blk,
+ __entry->len)
);
TRACE_EVENT(f2fs_shrink_extent_tree,
* SA_RESTORER 0x04000000
*/
+#if !defined MINSIGSTKSZ || !defined SIGSTKSZ
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
+#endif
#ifndef __ASSEMBLY__
typedef struct {
#define FS_EXTENT_FL 0x00080000 /* Extents */
#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
OVS_KEY_ATTR_MPLS, /* array of struct ovs_key_mpls.
* The implementation may restrict
* the accepted length of the array. */
- OVS_KEY_ATTR_CT_STATE, /* u8 bitmask of OVS_CS_F_* */
+ OVS_KEY_ATTR_CT_STATE, /* u32 bitmask of OVS_CS_F_* */
OVS_KEY_ATTR_CT_ZONE, /* u16 connection tracking zone. */
OVS_KEY_ATTR_CT_MARK, /* u32 connection tracking mark */
- OVS_KEY_ATTR_CT_LABEL, /* 16-octet connection tracking label */
+ OVS_KEY_ATTR_CT_LABELS, /* 16-octet connection tracking label */
#ifdef __KERNEL__
OVS_KEY_ATTR_TUNNEL_INFO, /* struct ip_tunnel_info */
__u8 nd_tll[ETH_ALEN];
};
-#define OVS_CT_LABEL_LEN 16
-struct ovs_key_ct_label {
- __u8 ct_label[OVS_CT_LABEL_LEN];
+#define OVS_CT_LABELS_LEN 16
+struct ovs_key_ct_labels {
+ __u8 ct_labels[OVS_CT_LABELS_LEN];
};
/* OVS_KEY_ATTR_CT_STATE flags */
#define OVS_CS_F_ESTABLISHED 0x02 /* Part of an existing connection. */
#define OVS_CS_F_RELATED 0x04 /* Related to an established
* connection. */
-#define OVS_CS_F_INVALID 0x20 /* Could not track connection. */
-#define OVS_CS_F_REPLY_DIR 0x40 /* Flow is in the reply direction. */
-#define OVS_CS_F_TRACKED 0x80 /* Conntrack has occurred. */
+#define OVS_CS_F_REPLY_DIR 0x08 /* Flow is in the reply direction. */
+#define OVS_CS_F_INVALID 0x10 /* Could not track connection. */
+#define OVS_CS_F_TRACKED 0x20 /* Conntrack has occurred. */
/**
* enum ovs_flow_attr - attributes for %OVS_FLOW_* commands.
/**
* enum ovs_ct_attr - Attributes for %OVS_ACTION_ATTR_CT action.
- * @OVS_CT_ATTR_FLAGS: u32 connection tracking flags.
+ * @OVS_CT_ATTR_COMMIT: If present, commits the connection to the conntrack
+ * table. This allows future packets for the same connection to be identified
+ * as 'established' or 'related'. The flow key for the current packet will
+ * retain the pre-commit connection state.
* @OVS_CT_ATTR_ZONE: u16 connection tracking zone.
* @OVS_CT_ATTR_MARK: u32 value followed by u32 mask. For each bit set in the
* mask, the corresponding bit in the value is copied to the connection
* tracking mark field in the connection.
- * @OVS_CT_ATTR_LABEL: %OVS_CT_LABEL_LEN value followed by %OVS_CT_LABEL_LEN
+ * @OVS_CT_ATTR_LABEL: %OVS_CT_LABELS_LEN value followed by %OVS_CT_LABELS_LEN
* mask. For each bit set in the mask, the corresponding bit in the value is
* copied to the connection tracking label field in the connection.
* @OVS_CT_ATTR_HELPER: variable length string defining conntrack ALG.
*/
enum ovs_ct_attr {
OVS_CT_ATTR_UNSPEC,
- OVS_CT_ATTR_FLAGS, /* u8 bitmask of OVS_CT_F_*. */
+ OVS_CT_ATTR_COMMIT, /* No argument, commits connection. */
OVS_CT_ATTR_ZONE, /* u16 zone id. */
OVS_CT_ATTR_MARK, /* mark to associate with this connection. */
- OVS_CT_ATTR_LABEL, /* label to associate with this connection. */
+ OVS_CT_ATTR_LABELS, /* labels to associate with this connection. */
OVS_CT_ATTR_HELPER, /* netlink helper to assist detection of
related connections. */
__OVS_CT_ATTR_MAX
#define OVS_CT_ATTR_MAX (__OVS_CT_ATTR_MAX - 1)
-/*
- * OVS_CT_ATTR_FLAGS flags - bitmask of %OVS_CT_F_*
- * @OVS_CT_F_COMMIT: Commits the flow to the conntrack table. This allows
- * future packets for the same connection to be identified as 'established'
- * or 'related'.
- */
-#define OVS_CT_F_COMMIT 0x01
-
/**
* enum ovs_action_attr - Action types.
*
* data immediately followed by a mask.
* The data must be zero for the unmasked
* bits. */
- OVS_ACTION_ATTR_CT, /* One nested OVS_CT_ATTR_* . */
+ OVS_ACTION_ATTR_CT, /* Nested OVS_CT_ATTR_* . */
__OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted
* from userspace. */
#define PSCI_0_2_FN64_MIGRATE PSCI_0_2_FN64(5)
#define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU PSCI_0_2_FN64(7)
+#define PSCI_1_0_FN_PSCI_FEATURES PSCI_0_2_FN(10)
+#define PSCI_1_0_FN_SYSTEM_SUSPEND PSCI_0_2_FN(14)
+
+#define PSCI_1_0_FN64_SYSTEM_SUSPEND PSCI_0_2_FN64(14)
+
/* PSCI v0.2 power state encoding for CPU_SUSPEND function */
#define PSCI_0_2_POWER_STATE_ID_MASK 0xffff
#define PSCI_0_2_POWER_STATE_ID_SHIFT 0
#define PSCI_0_2_POWER_STATE_AFFL_MASK \
(0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
+/* PSCI extended power state encoding for CPU_SUSPEND function */
+#define PSCI_1_0_EXT_POWER_STATE_ID_MASK 0xfffffff
+#define PSCI_1_0_EXT_POWER_STATE_ID_SHIFT 0
+#define PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT 30
+#define PSCI_1_0_EXT_POWER_STATE_TYPE_MASK \
+ (0x1 << PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT)
+
/* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
#define PSCI_0_2_AFFINITY_LEVEL_ON 0
#define PSCI_0_2_AFFINITY_LEVEL_OFF 1
#define PSCI_VERSION_MINOR(ver) \
((ver) & PSCI_VERSION_MINOR_MASK)
+/* PSCI features decoding (>=1.0) */
+#define PSCI_1_0_FEATURES_CPU_SUSPEND_PF_SHIFT 1
+#define PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK \
+ (0x1 << PSCI_1_0_FEATURES_CPU_SUSPEND_PF_SHIFT)
+
/* PSCI return values (inclusive of all PSCI versions) */
#define PSCI_RET_SUCCESS 0
#define PSCI_RET_NOT_SUPPORTED -1
#define PSCI_RET_INTERNAL_FAILURE -6
#define PSCI_RET_NOT_PRESENT -7
#define PSCI_RET_DISABLED -8
+#define PSCI_RET_INVALID_ADDRESS -9
#endif /* _UAPI_LINUX_PSCI_H */
/* Macros to handle rtattributes */
-#define RTA_ALIGNTO 4
+#define RTA_ALIGNTO 4U
#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
(rta)->rta_len >= sizeof(struct rtattr) && \
config GENERIC_PENDING_IRQ
bool
+# Support for generic irq migrating off cpu before the cpu is offline.
+config GENERIC_IRQ_MIGRATION
+ bool
+
# Alpha specific irq affinity mechanism
config AUTO_IRQ_AFFINITY
bool
obj-$(CONFIG_IRQ_DOMAIN) += irqdomain.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
+obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
obj-$(CONFIG_PM_SLEEP) += pm.o
obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
--- /dev/null
+/*
+ * Generic cpu hotunplug interrupt migration code copied from the
+ * arch/arm implementation
+ *
+ * Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <linux/ratelimit.h>
+#include <linux/irq.h>
+
+#include "internals.h"
+
+static bool migrate_one_irq(struct irq_desc *desc)
+{
+ struct irq_data *d = irq_desc_get_irq_data(desc);
+ const struct cpumask *affinity = d->common->affinity;
+ struct irq_chip *c;
+ bool ret = false;
+
+ /*
+ * If this is a per-CPU interrupt, or the affinity does not
+ * include this CPU, then we have nothing to do.
+ */
+ if (irqd_is_per_cpu(d) ||
+ !cpumask_test_cpu(smp_processor_id(), affinity))
+ return false;
+
+ if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+ affinity = cpu_online_mask;
+ ret = true;
+ }
+
+ c = irq_data_get_irq_chip(d);
+ if (!c->irq_set_affinity) {
+ pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+ } else {
+ int r = irq_do_set_affinity(d, affinity, false);
+ if (r)
+ pr_warn_ratelimited("IRQ%u: set affinity failed(%d).\n",
+ d->irq, r);
+ }
+
+ return ret;
+}
+
+/**
+ * irq_migrate_all_off_this_cpu - Migrate irqs away from offline cpu
+ *
+ * The current CPU has been marked offline. Migrate IRQs off this CPU.
+ * If the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ *
+ * Note: we must iterate over all IRQs, whether they have an attached
+ * action structure or not, as we need to get chained interrupts too.
+ */
+void irq_migrate_all_off_this_cpu(void)
+{
+ unsigned int irq;
+ struct irq_desc *desc;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for_each_active_irq(irq) {
+ bool affinity_broken;
+
+ desc = irq_to_desc(irq);
+ raw_spin_lock(&desc->lock);
+ affinity_broken = migrate_one_irq(desc);
+ raw_spin_unlock(&desc->lock);
+
+ if (affinity_broken)
+ pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
+ irq, smp_processor_id());
+ }
+
+ local_irq_restore(flags);
+}
/**
* handle_bad_irq - handle spurious and unhandled irqs
- * @irq: the interrupt number
* @desc: description of the interrupt
*
* Handles spurious and unhandled IRQ's. It also prints a debugmessage.
kstat_incr_irqs_this_cpu(desc);
ack_bad_irq(irq);
}
+EXPORT_SYMBOL_GPL(handle_bad_irq);
/*
* Special, empty irq handler:
{
struct irq_chip *chip = info->chip;
- BUG_ON(!chip);
- if (!chip->irq_mask)
- chip->irq_mask = pci_msi_mask_irq;
- if (!chip->irq_unmask)
- chip->irq_unmask = pci_msi_unmask_irq;
+ BUG_ON(!chip || !chip->irq_mask || !chip->irq_unmask);
if (!chip->irq_set_affinity)
chip->irq_set_affinity = msi_domain_set_affinity;
}
call_usermodehelper_exec_sync(sub_info);
} else {
pid_t pid;
-
+ /*
+ * Use CLONE_PARENT to reparent it to kthreadd; we do not
+ * want to pollute current->children, and we need a parent
+ * that always ignores SIGCHLD to ensure auto-reaping.
+ */
pid = kernel_thread(call_usermodehelper_exec_async, sub_info,
- SIGCHLD);
+ CLONE_PARENT | SIGCHLD);
if (pid < 0) {
sub_info->retval = pid;
umh_complete(sub_info);
if (core_kernel_text(a))
return;
- /* module_text_address is safe here: we're supposed to have reference
- * to module from symbol_get, so it can't go away. */
+ /*
+ * Even though we hold a reference on the module; we still need to
+ * disable preemption in order to safely traverse the data structure.
+ */
+ preempt_disable();
modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(symbol_put_addr);
ok:
return security_syslog(type);
}
+EXPORT_SYMBOL_GPL(check_syslog_permissions);
static void append_char(char **pp, char *e, char c)
{
trace_sched_wakeup_new(p);
check_preempt_curr(rq, p, WF_FORK);
#ifdef CONFIG_SMP
- if (p->sched_class->task_woken)
+ if (p->sched_class->task_woken) {
+ /*
+ * Nothing relies on rq->lock after this, so its fine to
+ * drop it.
+ */
+ lockdep_unpin_lock(&rq->lock);
p->sched_class->task_woken(rq, p);
+ lockdep_pin_lock(&rq->lock);
+ }
#endif
task_rq_unlock(rq, p, &flags);
}
* If a task dies, then it sets TASK_DEAD in tsk->state and calls
* schedule one last time. The schedule call will never return, and
* the scheduled task must drop that reference.
- * The test for TASK_DEAD must occur while the runqueue locks are
- * still held, otherwise prev could be scheduled on another cpu, die
- * there before we look at prev->state, and then the reference would
- * be dropped twice.
- * Manfred Spraul <manfred@colorfullife.com>
+ *
+ * We must observe prev->state before clearing prev->on_cpu (in
+ * finish_lock_switch), otherwise a concurrent wakeup can get prev
+ * running on another CPU and we could rave with its RUNNING -> DEAD
+ * transition, resulting in a double drop.
*/
prev_state = prev->state;
vtime_task_switch(prev);
alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
- /* nohz_full won't take effect without isolating the cpus. */
- tick_nohz_full_add_cpus_to(cpu_isolated_map);
-
sched_init_numa();
/*
* Queueing this task back might have overloaded rq, check if we need
* to kick someone away.
*/
- if (has_pushable_dl_tasks(rq))
+ if (has_pushable_dl_tasks(rq)) {
+ /*
+ * Nothing relies on rq->lock after this, so its safe to drop
+ * rq->lock.
+ */
+ lockdep_unpin_lock(&rq->lock);
push_dl_task(rq);
+ lockdep_pin_lock(&rq->lock);
+ }
#endif
unlock:
int target = find_later_rq(p);
if (target != -1 &&
- dl_time_before(p->dl.deadline,
- cpu_rq(target)->dl.earliest_dl.curr))
+ (dl_time_before(p->dl.deadline,
+ cpu_rq(target)->dl.earliest_dl.curr) ||
+ (cpu_rq(target)->dl.dl_nr_running == 0)))
cpu = target;
}
rcu_read_unlock();
later_rq = cpu_rq(cpu);
- if (!dl_time_before(task->dl.deadline,
+ if (later_rq->dl.dl_nr_running &&
+ !dl_time_before(task->dl.deadline,
later_rq->dl.earliest_dl.curr)) {
/*
* Target rq has tasks of equal or earlier deadline,
*/
tg_weight = atomic_long_read(&tg->load_avg);
tg_weight -= cfs_rq->tg_load_avg_contrib;
- tg_weight += cfs_rq_load_avg(cfs_rq);
+ tg_weight += cfs_rq->load.weight;
return tg_weight;
}
long tg_weight, load, shares;
tg_weight = calc_tg_weight(tg, cfs_rq);
- load = cfs_rq_load_avg(cfs_rq);
+ load = cfs_rq->load.weight;
shares = (tg->shares * load);
if (tg_weight)
/* Group cfs_rq's load_avg is used for task_h_load and update_cfs_share */
static inline int update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
{
- int decayed;
struct sched_avg *sa = &cfs_rq->avg;
+ int decayed, removed = 0;
if (atomic_long_read(&cfs_rq->removed_load_avg)) {
long r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
sa->load_avg = max_t(long, sa->load_avg - r, 0);
sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
+ removed = 1;
}
if (atomic_long_read(&cfs_rq->removed_util_avg)) {
cfs_rq->load_last_update_time_copy = sa->last_update_time;
#endif
- return decayed;
+ return decayed || removed;
}
/* Update task and its cfs_rq load average */
rcu_idle_enter();
trace_cpu_idle_rcuidle(0, smp_processor_id());
local_irq_enable();
+ stop_critical_timings();
while (!tif_need_resched() &&
(cpu_idle_force_poll || tick_check_broadcast_expired()))
cpu_relax();
+ start_critical_timings();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
rcu_idle_exit();
return 1;
* After ->on_cpu is cleared, the task can be moved to a different CPU.
* We must ensure this doesn't happen until the switch is completely
* finished.
+ *
+ * Pairs with the control dependency and rmb in try_to_wake_up().
*/
- smp_wmb();
- prev->on_cpu = 0;
+ smp_store_release(&prev->on_cpu, 0);
#endif
#ifdef CONFIG_DEBUG_SPINLOCK
/* this is a valid case when another task releases the spinlock */
set_normalized_timespec64(&tmp, -boot.tv_sec, -boot.tv_nsec);
tk_set_wall_to_mono(tk, tmp);
- timekeeping_update(tk, TK_MIRROR);
+ timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
write_seqcount_end(&tk_core.seq);
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
if (!object_is_on_stack(stack))
return;
+ /* Can't do this from NMI context (can cause deadlocks) */
+ if (in_nmi())
+ return;
+
local_irq_save(flags);
arch_spin_lock(&max_stack_lock);
+ /*
+ * RCU may not be watching, make it see us.
+ * The stack trace code uses rcu_sched.
+ */
+ rcu_irq_enter();
+
/* In case another CPU set the tracer_frame on us */
if (unlikely(!frame_size))
this_size -= tracer_frame;
}
out:
+ rcu_irq_exit();
arch_spin_unlock(&max_stack_lock);
local_irq_restore(flags);
}
timer_stats_timer_set_start_info(&dwork->timer);
dwork->wq = wq;
+ /* timer isn't guaranteed to run in this cpu, record earlier */
+ if (cpu == WORK_CPU_UNBOUND)
+ cpu = raw_smp_processor_id();
dwork->cpu = cpu;
timer->expires = jiffies + delay;
- if (unlikely(cpu != WORK_CPU_UNBOUND))
- add_timer_on(timer, cpu);
- else
- add_timer(timer);
+ add_timer_on(timer, cpu);
}
/**
config ZLIB_DEFLATE
tristate
+ select BITREVERSE
config LZO_COMPRESS
tristate
config FRAME_WARN
int "Warn for stack frames larger than (needs gcc 4.4)"
range 0 8192
+ default 0 if KASAN
default 1024 if !64BIT
default 2048 if 64BIT
help
printk(KERN_NOTICE "FAULT_INJECTION: forcing a failure.\n"
"name %pd, interval %lu, probability %lu, "
"space %d, times %d\n", attr->dname,
- attr->probability, attr->interval,
+ attr->interval, attr->probability,
atomic_read(&attr->space),
atomic_read(&attr->times));
if (attr->verbose > 1)
* the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA. */
-#include <asm-generic/bitops/count_zeros.h>
+#include <linux/count_zeros.h>
/* You have to define the following before including this file:
*
*/
#include <linux/bitops.h>
-#include <asm-generic/bitops/count_zeros.h>
+#include <linux/count_zeros.h>
#include "mpi-internal.h"
#define MAX_EXTERN_MPI_BITS 16384
printk("%.*s", (end - start) + 1, buf);
}
+/*
+ * When raise() is called it will be is passed a pointer to the
+ * backtrace_mask. Architectures that call nmi_cpu_backtrace()
+ * directly from their raise() functions may rely on the mask
+ * they are passed being updated as a side effect of this call.
+ */
void nmi_trigger_all_cpu_backtrace(bool include_self,
void (*raise)(cpumask_t *mask))
{
/* Replace printk to write into the NMI seq */
this_cpu_write(printk_func, nmi_vprintk);
pr_warn("NMI backtrace for cpu %d\n", cpu);
- show_regs(regs);
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
this_cpu_write(printk_func, printk_func_save);
cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
release_work);
struct backing_dev_info *bdi = wb->bdi;
+ spin_lock_irq(&cgwb_lock);
+ list_del_rcu(&wb->bdi_node);
+ spin_unlock_irq(&cgwb_lock);
+
wb_shutdown(wb);
css_put(wb->memcg_css);
ret = radix_tree_insert(&bdi->cgwb_tree, memcg_css->id, wb);
if (!ret) {
atomic_inc(&bdi->usage_cnt);
+ list_add_tail_rcu(&wb->bdi_node, &bdi->wb_list);
list_add(&wb->memcg_node, memcg_cgwb_list);
list_add(&wb->blkcg_node, blkcg_cgwb_list);
css_get(memcg_css);
static void cgwb_bdi_destroy(struct backing_dev_info *bdi)
{
struct radix_tree_iter iter;
- struct bdi_writeback_congested *congested, *congested_n;
+ struct rb_node *rbn;
void **slot;
WARN_ON(test_bit(WB_registered, &bdi->wb.state));
radix_tree_for_each_slot(slot, &bdi->cgwb_tree, &iter, 0)
cgwb_kill(*slot);
- rbtree_postorder_for_each_entry_safe(congested, congested_n,
- &bdi->cgwb_congested_tree, rb_node) {
- rb_erase(&congested->rb_node, &bdi->cgwb_congested_tree);
+ while ((rbn = rb_first(&bdi->cgwb_congested_tree))) {
+ struct bdi_writeback_congested *congested =
+ rb_entry(rbn, struct bdi_writeback_congested, rb_node);
+
+ rb_erase(rbn, &bdi->cgwb_congested_tree);
congested->bdi = NULL; /* mark @congested unlinked */
}
int bdi_init(struct backing_dev_info *bdi)
{
+ int ret;
+
bdi->dev = NULL;
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = FPROP_FRAC_BASE;
INIT_LIST_HEAD(&bdi->bdi_list);
+ INIT_LIST_HEAD(&bdi->wb_list);
init_waitqueue_head(&bdi->wb_waitq);
- return cgwb_bdi_init(bdi);
+ ret = cgwb_bdi_init(bdi);
+
+ list_add_tail_rcu(&bdi->wb.bdi_node, &bdi->wb_list);
+
+ return ret;
}
EXPORT_SYMBOL(bdi_init);
synchronize_rcu_expedited();
}
-void bdi_destroy(struct backing_dev_info *bdi)
+void bdi_unregister(struct backing_dev_info *bdi)
{
/* make sure nobody finds us on the bdi_list anymore */
bdi_remove_from_list(bdi);
device_unregister(bdi->dev);
bdi->dev = NULL;
}
+}
+void bdi_exit(struct backing_dev_info *bdi)
+{
+ WARN_ON_ONCE(bdi->dev);
wb_exit(&bdi->wb);
}
+
+void bdi_destroy(struct backing_dev_info *bdi)
+{
+ bdi_unregister(bdi);
+ bdi_exit(bdi);
+}
EXPORT_SYMBOL(bdi_destroy);
/*
* This function allocates part of contiguous memory on specific
* contiguous memory area.
*/
-struct page *cma_alloc(struct cma *cma, unsigned int count, unsigned int align)
+struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align)
{
unsigned long mask, offset, pfn, start = 0;
unsigned long bitmap_maxno, bitmap_no, bitmap_count;
if (!cma || !cma->count)
return NULL;
- pr_debug("%s(cma %p, count %d, align %d)\n", __func__, (void *)cma,
+ pr_debug("%s(cma %p, count %zu, align %d)\n", __func__, (void *)cma,
count, align);
if (!count)
break;
}
+ if (fatal_signal_pending(current)) {
+ status = -EINTR;
+ break;
+ }
+
status = a_ops->write_begin(file, mapping, pos, bytes, flags,
&page, &fsdata);
if (unlikely(status < 0))
written += copied;
balance_dirty_pages_ratelimited(mapping);
- if (fatal_signal_pending(current)) {
- status = -EINTR;
- break;
- }
} while (iov_iter_count(i));
return written ? written : status;
* here). But it is generally safer to never allow
* small and huge TLB entries for the same virtual
* address to be loaded simultaneously. So instead of
- * doing "pmd_populate(); flush_tlb_range();" we first
+ * doing "pmd_populate(); flush_pmd_tlb_range();" we first
* mark the current pmd notpresent (atomically because
* here the pmd_trans_huge and pmd_trans_splitting
* must remain set at all times on the pmd until the
for (_pte = pte; _pte < pte+HPAGE_PMD_NR;
_pte++, address += PAGE_SIZE) {
pte_t pteval = *_pte;
- if (pte_none(pteval) || is_zero_pfn(pte_pfn(pteval))) {
+ if (pte_none(pteval) || (pte_present(pteval) &&
+ is_zero_pfn(pte_pfn(pteval)))) {
if (!userfaultfd_armed(vma) &&
++none_or_zero <= khugepaged_max_ptes_none)
continue;
ret = page_counter_memparse(args, "-1", &threshold);
if (ret)
return ret;
+ threshold <<= PAGE_SHIFT;
mutex_lock(&memcg->thresholds_lock);
/**
* mem_cgroup_wb_stats - retrieve writeback related stats from its memcg
* @wb: bdi_writeback in question
- * @pavail: out parameter for number of available pages
+ * @pfilepages: out parameter for number of file pages
+ * @pheadroom: out parameter for number of allocatable pages according to memcg
* @pdirty: out parameter for number of dirty pages
* @pwriteback: out parameter for number of pages under writeback
*
- * Determine the numbers of available, dirty, and writeback pages in @wb's
- * memcg. Dirty and writeback are self-explanatory. Available is a bit
- * more involved.
+ * Determine the numbers of file, headroom, dirty, and writeback pages in
+ * @wb's memcg. File, dirty and writeback are self-explanatory. Headroom
+ * is a bit more involved.
*
- * A memcg's headroom is "min(max, high) - used". The available memory is
- * calculated as the lowest headroom of itself and the ancestors plus the
- * number of pages already being used for file pages. Note that this
- * doesn't consider the actual amount of available memory in the system.
- * The caller should further cap *@pavail accordingly.
+ * A memcg's headroom is "min(max, high) - used". In the hierarchy, the
+ * headroom is calculated as the lowest headroom of itself and the
+ * ancestors. Note that this doesn't consider the actual amount of
+ * available memory in the system. The caller should further cap
+ * *@pheadroom accordingly.
*/
-void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pavail,
- unsigned long *pdirty, unsigned long *pwriteback)
+void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pfilepages,
+ unsigned long *pheadroom, unsigned long *pdirty,
+ unsigned long *pwriteback)
{
struct mem_cgroup *memcg = mem_cgroup_from_css(wb->memcg_css);
struct mem_cgroup *parent;
- unsigned long head_room = PAGE_COUNTER_MAX;
- unsigned long file_pages;
*pdirty = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_DIRTY);
/* this should eventually include NR_UNSTABLE_NFS */
*pwriteback = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
+ *pfilepages = mem_cgroup_nr_lru_pages(memcg, (1 << LRU_INACTIVE_FILE) |
+ (1 << LRU_ACTIVE_FILE));
+ *pheadroom = PAGE_COUNTER_MAX;
- file_pages = mem_cgroup_nr_lru_pages(memcg, (1 << LRU_INACTIVE_FILE) |
- (1 << LRU_ACTIVE_FILE));
while ((parent = parent_mem_cgroup(memcg))) {
unsigned long ceiling = min(memcg->memory.limit, memcg->high);
unsigned long used = page_counter_read(&memcg->memory);
- head_room = min(head_room, ceiling - min(ceiling, used));
+ *pheadroom = min(*pheadroom, ceiling - min(ceiling, used));
memcg = parent;
}
-
- *pavail = file_pages + head_room;
}
#else /* CONFIG_CGROUP_WRITEBACK */
if (details.last_index < details.first_index)
details.last_index = ULONG_MAX;
+
+ /* DAX uses i_mmap_lock to serialise file truncate vs page fault */
i_mmap_lock_write(mapping);
if (unlikely(!RB_EMPTY_ROOT(&mapping->i_mmap)))
unmap_mapping_range_tree(&mapping->i_mmap, &details);
unsigned long pos_ratio;
};
-#define DTC_INIT_COMMON(__wb) .wb = (__wb), \
- .wb_completions = &(__wb)->completions
-
/*
* Length of period for aging writeout fractions of bdis. This is an
* arbitrarily chosen number. The longer the period, the slower fractions will
#ifdef CONFIG_CGROUP_WRITEBACK
-#define GDTC_INIT(__wb) .dom = &global_wb_domain, \
- DTC_INIT_COMMON(__wb)
+#define GDTC_INIT(__wb) .wb = (__wb), \
+ .dom = &global_wb_domain, \
+ .wb_completions = &(__wb)->completions
+
#define GDTC_INIT_NO_WB .dom = &global_wb_domain
-#define MDTC_INIT(__wb, __gdtc) .dom = mem_cgroup_wb_domain(__wb), \
- .gdtc = __gdtc, \
- DTC_INIT_COMMON(__wb)
+
+#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \
+ .dom = mem_cgroup_wb_domain(__wb), \
+ .wb_completions = &(__wb)->memcg_completions, \
+ .gdtc = __gdtc
static bool mdtc_valid(struct dirty_throttle_control *dtc)
{
#else /* CONFIG_CGROUP_WRITEBACK */
-#define GDTC_INIT(__wb) DTC_INIT_COMMON(__wb)
+#define GDTC_INIT(__wb) .wb = (__wb), \
+ .wb_completions = &(__wb)->completions
#define GDTC_INIT_NO_WB
#define MDTC_INIT(__wb, __gdtc)
return max(thresh, dom->dirty_limit);
}
-/* memory available to a memcg domain is capped by system-wide clean memory */
-static void mdtc_cap_avail(struct dirty_throttle_control *mdtc)
+/*
+ * Memory which can be further allocated to a memcg domain is capped by
+ * system-wide clean memory excluding the amount being used in the domain.
+ */
+static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
+ unsigned long filepages, unsigned long headroom)
{
struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
- unsigned long clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
+ unsigned long clean = filepages - min(filepages, mdtc->dirty);
+ unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
+ unsigned long other_clean = global_clean - min(global_clean, clean);
- mdtc->avail = min(mdtc->avail, clean);
+ mdtc->avail = filepages + min(headroom, other_clean);
}
/**
}
if (mdtc) {
- unsigned long writeback;
+ unsigned long filepages, headroom, writeback;
/*
* If @wb belongs to !root memcg, repeat the same
* basic calculations for the memcg domain.
*/
- mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty,
- &writeback);
- mdtc_cap_avail(mdtc);
+ mem_cgroup_wb_stats(wb, &filepages, &headroom,
+ &mdtc->dirty, &writeback);
mdtc->dirty += writeback;
+ mdtc_calc_avail(mdtc, filepages, headroom);
domain_dirty_limits(mdtc);
return true;
if (mdtc) {
- unsigned long writeback;
+ unsigned long filepages, headroom, writeback;
- mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty, &writeback);
- mdtc_cap_avail(mdtc);
+ mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty,
+ &writeback);
+ mdtc_calc_avail(mdtc, filepages, headroom);
domain_dirty_limits(mdtc); /* ditto, ignore writeback */
if (mdtc->dirty > mdtc->bg_thresh)
int nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
struct bdi_writeback *wb;
- struct wb_iter iter;
/*
* We want to write everything out, not just down to the dirty
if (!bdi_has_dirty_io(&q->backing_dev_info))
return;
- bdi_for_each_wb(wb, &q->backing_dev_info, &iter, 0)
+ rcu_read_lock();
+ list_for_each_entry_rcu(wb, &q->backing_dev_info.wb_list, bdi_node)
if (wb_has_dirty_io(wb))
wb_start_writeback(wb, nr_pages, true,
WB_REASON_LAPTOP_TIMER);
+ rcu_read_unlock();
}
/*
}
#endif
+#ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+int ptep_clear_flush_young(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
+{
+ int young;
+ young = ptep_test_and_clear_young(vma, address, ptep);
+ if (young)
+ flush_tlb_page(vma, address);
+ return young;
+}
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
+pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address,
+ pte_t *ptep)
+{
+ struct mm_struct *mm = (vma)->vm_mm;
+ pte_t pte;
+ pte = ptep_get_and_clear(mm, address, ptep);
+ if (pte_accessible(mm, pte))
+ flush_tlb_page(vma, address);
+ return pte;
+}
+#endif
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+#ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+
+/*
+ * ARCHes with special requirements for evicting THP backing TLB entries can
+ * implement this. Otherwise also, it can help optimize normal TLB flush in
+ * THP regime. stock flush_tlb_range() typically has optimization to nuke the
+ * entire TLB TLB if flush span is greater than a threshhold, which will
+ * likely be true for a single huge page. Thus a single thp flush will
+ * invalidate the entire TLB which is not desitable.
+ * e.g. see arch/arc: flush_pmd_tlb_range
+ */
+#define flush_pmd_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
+#endif
+
#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty)
{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
int changed = !pmd_same(*pmdp, entry);
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
if (changed) {
set_pmd_at(vma->vm_mm, address, pmdp, entry);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
return changed;
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
- BUG();
- return 0;
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-}
-#endif
-
-#ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-int ptep_clear_flush_young(struct vm_area_struct *vma,
- unsigned long address, pte_t *ptep)
-{
- int young;
- young = ptep_test_and_clear_young(vma, address, ptep);
- if (young)
- flush_tlb_page(vma, address);
- return young;
}
#endif
unsigned long address, pmd_t *pmdp)
{
int young;
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-#else
- BUG();
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
young = pmdp_test_and_clear_young(vma, address, pmdp);
if (young)
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return young;
}
#endif
-#ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
-pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address,
- pte_t *ptep)
-{
- struct mm_struct *mm = (vma)->vm_mm;
- pte_t pte;
- pte = ptep_get_and_clear(mm, address, ptep);
- if (pte_accessible(mm, pte))
- flush_tlb_page(vma, address);
- return pte;
-}
-#endif
-
#ifndef __HAVE_ARCH_PMDP_HUGE_CLEAR_FLUSH
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
VM_BUG_ON(!pmd_trans_huge(*pmdp));
pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return pmd;
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
set_pmd_at(vma->vm_mm, address, pmdp, pmd);
/* tlb flush only to serialize against gup-fast */
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PGTABLE_DEPOSIT
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
pgtable_t pgtable)
{
list_add(&pgtable->lru, &pmd_huge_pte(mm, pmdp)->lru);
pmd_huge_pte(mm, pmdp) = pgtable;
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PGTABLE_WITHDRAW
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
/* no "address" argument so destroys page coloring of some arch */
pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
{
}
return pgtable;
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PMDP_INVALIDATE
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
pmd_t entry = *pmdp;
set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(entry));
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef pmdp_collapse_flush
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
pmd_t pmdp_collapse_flush(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
VM_BUG_ON(pmd_trans_huge(*pmdp));
pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return pmd;
}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
while (!list_empty(pages)) {
page = list_to_page(pages);
list_del(&page->lru);
- if (add_to_page_cache_lru(page, mapping,
- page->index, GFP_KERNEL)) {
+ if (add_to_page_cache_lru(page, mapping, page->index,
+ GFP_KERNEL & mapping_gfp_mask(mapping))) {
read_cache_pages_invalidate_page(mapping, page);
continue;
}
for (page_idx = 0; page_idx < nr_pages; page_idx++) {
struct page *page = list_to_page(pages);
list_del(&page->lru);
- if (!add_to_page_cache_lru(page, mapping,
- page->index, GFP_KERNEL)) {
+ if (!add_to_page_cache_lru(page, mapping, page->index,
+ GFP_KERNEL & mapping_gfp_mask(mapping))) {
mapping->a_ops->readpage(filp, page);
}
page_cache_release(page);
static void vmstat_update(struct work_struct *w)
{
- if (refresh_cpu_vm_stats())
+ if (refresh_cpu_vm_stats()) {
/*
* Counters were updated so we expect more updates
* to occur in the future. Keep on running the
* update worker thread.
*/
- schedule_delayed_work(this_cpu_ptr(&vmstat_work),
+ schedule_delayed_work_on(smp_processor_id(),
+ this_cpu_ptr(&vmstat_work),
round_jiffies_relative(sysctl_stat_interval));
- else {
+ } else {
/*
* We did not update any counters so the app may be in
* a mode where it does not cause counter updates.
* autoconnect action, remove them completely. If they are, just unmark
* them as waiting for connection, by clearing explicit_connect field.
*/
- if (params->auto_connect == HCI_AUTO_CONN_EXPLICIT)
+ params->explicit_connect = false;
+
+ list_del_init(¶ms->action);
+
+ switch (params->auto_connect) {
+ case HCI_AUTO_CONN_EXPLICIT:
hci_conn_params_del(conn->hdev, bdaddr, bdaddr_type);
- else
- params->explicit_connect = false;
+ /* return instead of break to avoid duplicate scan update */
+ return;
+ case HCI_AUTO_CONN_DIRECT:
+ case HCI_AUTO_CONN_ALWAYS:
+ list_add(¶ms->action, &conn->hdev->pend_le_conns);
+ break;
+ case HCI_AUTO_CONN_REPORT:
+ list_add(¶ms->action, &conn->hdev->pend_le_reports);
+ break;
+ default:
+ break;
+ }
+
+ hci_update_background_scan(conn->hdev);
+}
+
+static void hci_conn_cleanup(struct hci_conn *conn)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
+ hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
+
+ hci_chan_list_flush(conn);
+
+ hci_conn_hash_del(hdev, conn);
+
+ if (hdev->notify)
+ hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
+
+ hci_conn_del_sysfs(conn);
+
+ debugfs_remove_recursive(conn->debugfs);
+
+ hci_dev_put(hdev);
+
+ hci_conn_put(conn);
}
/* This function requires the caller holds hdev->lock */
{
hci_connect_le_scan_cleanup(conn);
- hci_conn_hash_del(conn->hdev, conn);
- hci_update_background_scan(conn->hdev);
+ /* We can't call hci_conn_del here since that would deadlock
+ * with trying to call cancel_delayed_work_sync(&conn->disc_work).
+ * Instead, call just hci_conn_cleanup() which contains the bare
+ * minimum cleanup operations needed for a connection in this
+ * state.
+ */
+ hci_conn_cleanup(conn);
}
static void hci_acl_create_connection(struct hci_conn *conn)
}
}
- hci_chan_list_flush(conn);
-
if (conn->amp_mgr)
amp_mgr_put(conn->amp_mgr);
- hci_conn_hash_del(hdev, conn);
- if (hdev->notify)
- hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
-
skb_queue_purge(&conn->data_q);
- hci_conn_del_sysfs(conn);
-
- debugfs_remove_recursive(conn->debugfs);
-
- if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
- hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
-
- hci_dev_put(hdev);
-
- hci_conn_put(conn);
+ /* Remove the connection from the list and cleanup its remaining
+ * state. This is a separate function since for some cases like
+ * BT_CONNECT_SCAN we *only* want the cleanup part without the
+ * rest of hci_conn_del.
+ */
+ hci_conn_cleanup(conn);
return 0;
}
if (is_connected(hdev, addr, addr_type))
return -EISCONN;
- params = hci_conn_params_add(hdev, addr, addr_type);
- if (!params)
- return -EIO;
+ params = hci_conn_params_lookup(hdev, addr, addr_type);
+ if (!params) {
+ params = hci_conn_params_add(hdev, addr, addr_type);
+ if (!params)
+ return -ENOMEM;
- /* If we created new params, or existing params were marked as disabled,
- * mark them to be used just once to connect.
- */
- if (params->auto_connect == HCI_AUTO_CONN_DISABLED) {
+ /* If we created new params, mark them to be deleted in
+ * hci_connect_le_scan_cleanup. It's different case than
+ * existing disabled params, those will stay after cleanup.
+ */
params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
+ }
+
+ /* We're trying to connect, so make sure params are at pend_le_conns */
+ if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
+ params->auto_connect == HCI_AUTO_CONN_REPORT ||
+ params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
list_del_init(¶ms->action);
list_add(¶ms->action, &hdev->pend_le_conns);
}
return param;
}
- list_for_each_entry(param, &hdev->pend_le_reports, action) {
- if (bacmp(¶m->addr, addr) == 0 &&
- param->addr_type == addr_type &&
- param->explicit_connect)
- return param;
- }
-
return NULL;
}
wake_up_bit(&hdev->flags, HCI_INQUIRY);
hci_dev_lock(hdev);
- hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+ /* Set discovery state to stopped if we're not doing LE active
+ * scanning.
+ */
+ if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
+ hdev->le_scan_type != LE_SCAN_ACTIVE)
+ hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
hci_dev_unlock(hdev);
hci_conn_check_pending(hdev);
/* If we're not connectable only connect devices that we have in
* our pend_le_conns list.
*/
- params = hci_explicit_connect_lookup(hdev, addr, addr_type);
-
+ params = hci_pend_le_action_lookup(&hdev->pend_le_conns, addr,
+ addr_type);
if (!params)
return NULL;
auth_type);
} else {
u8 addr_type;
+ struct hci_conn_params *p;
/* Convert from L2CAP channel address type to HCI address type
*/
* If connection parameters already exist, then they
* will be kept and this function does nothing.
*/
- hci_conn_params_add(hdev, &cp->addr.bdaddr, addr_type);
+ p = hci_conn_params_add(hdev, &cp->addr.bdaddr, addr_type);
+
+ if (p->auto_connect == HCI_AUTO_CONN_EXPLICIT)
+ p->auto_connect = HCI_AUTO_CONN_DISABLED;
conn = hci_connect_le_scan(hdev, &cp->addr.bdaddr,
addr_type, sec_level,
__hci_update_background_scan(req);
break;
case HCI_AUTO_CONN_REPORT:
- list_add(¶ms->action, &hdev->pend_le_reports);
+ if (params->explicit_connect)
+ list_add(¶ms->action, &hdev->pend_le_conns);
+ else
+ list_add(¶ms->action, &hdev->pend_le_reports);
__hci_update_background_scan(req);
break;
case HCI_AUTO_CONN_DIRECT:
case HCI_AUTO_CONN_ALWAYS:
if (!is_connected(hdev, addr, addr_type)) {
list_add(¶ms->action, &hdev->pend_le_conns);
- __hci_update_background_scan(req);
+ /* If we are in scan phase of connecting, we were
+ * already added to pend_le_conns and scanning.
+ */
+ if (params->auto_connect != HCI_AUTO_CONN_EXPLICIT)
+ __hci_update_background_scan(req);
}
break;
}
goto unlock;
}
- if (params->auto_connect == HCI_AUTO_CONN_DISABLED) {
+ if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
+ params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
err = cmd->cmd_complete(cmd,
MGMT_STATUS_INVALID_PARAMS);
mgmt_pending_remove(cmd);
if (p->auto_connect == HCI_AUTO_CONN_DISABLED)
continue;
device_removed(sk, hdev, &p->addr, p->addr_type);
+ if (p->explicit_connect) {
+ p->auto_connect = HCI_AUTO_CONN_EXPLICIT;
+ continue;
+ }
list_del(&p->action);
list_del(&p->list);
kfree(p);
switch (op->op) {
case CEPH_OSD_OP_READ:
case CEPH_OSD_OP_WRITE:
+ case CEPH_OSD_OP_WRITEFULL:
ceph_osd_data_release(&op->extent.osd_data);
break;
case CEPH_OSD_OP_CALL:
size_t payload_len = 0;
BUG_ON(opcode != CEPH_OSD_OP_READ && opcode != CEPH_OSD_OP_WRITE &&
- opcode != CEPH_OSD_OP_ZERO && opcode != CEPH_OSD_OP_TRUNCATE);
+ opcode != CEPH_OSD_OP_WRITEFULL && opcode != CEPH_OSD_OP_ZERO &&
+ opcode != CEPH_OSD_OP_TRUNCATE);
op->extent.offset = offset;
op->extent.length = length;
op->extent.truncate_size = truncate_size;
op->extent.truncate_seq = truncate_seq;
- if (opcode == CEPH_OSD_OP_WRITE)
+ if (opcode == CEPH_OSD_OP_WRITE || opcode == CEPH_OSD_OP_WRITEFULL)
payload_len += length;
op->payload_len = payload_len;
break;
case CEPH_OSD_OP_READ:
case CEPH_OSD_OP_WRITE:
+ case CEPH_OSD_OP_WRITEFULL:
case CEPH_OSD_OP_ZERO:
case CEPH_OSD_OP_TRUNCATE:
- if (src->op == CEPH_OSD_OP_WRITE)
+ if (src->op == CEPH_OSD_OP_WRITE ||
+ src->op == CEPH_OSD_OP_WRITEFULL)
request_data_len = src->extent.length;
dst->extent.offset = cpu_to_le64(src->extent.offset);
dst->extent.length = cpu_to_le64(src->extent.length);
dst->extent.truncate_seq =
cpu_to_le32(src->extent.truncate_seq);
osd_data = &src->extent.osd_data;
- if (src->op == CEPH_OSD_OP_WRITE)
+ if (src->op == CEPH_OSD_OP_WRITE ||
+ src->op == CEPH_OSD_OP_WRITEFULL)
ceph_osdc_msg_data_add(req->r_request, osd_data);
else
ceph_osdc_msg_data_add(req->r_reply, osd_data);
#include <linux/rtnetlink.h>
#include <linux/stat.h>
#include <net/dst.h>
+#include <net/dst_metadata.h>
#include <net/pkt_sched.h>
#include <net/checksum.h>
#include <net/xfrm.h>
}
EXPORT_SYMBOL(dev_get_iflink);
+/**
+ * dev_fill_metadata_dst - Retrieve tunnel egress information.
+ * @dev: targeted interface
+ * @skb: The packet.
+ *
+ * For better visibility of tunnel traffic OVS needs to retrieve
+ * egress tunnel information for a packet. Following API allows
+ * user to get this info.
+ */
+int dev_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
+{
+ struct ip_tunnel_info *info;
+
+ if (!dev->netdev_ops || !dev->netdev_ops->ndo_fill_metadata_dst)
+ return -EINVAL;
+
+ info = skb_tunnel_info_unclone(skb);
+ if (!info)
+ return -ENOMEM;
+ if (unlikely(!(info->mode & IP_TUNNEL_INFO_TX)))
+ return -EINVAL;
+
+ return dev->netdev_ops->ndo_fill_metadata_dst(dev, skb);
+}
+EXPORT_SYMBOL_GPL(dev_fill_metadata_dst);
+
/**
* __dev_get_by_name - find a device by its name
* @net: the applicable net namespace
gstrings.len = ret;
- data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+ data = kcalloc(gstrings.len, ETH_GSTRING_LEN, GFP_USER);
if (!data)
return -ENOMEM;
return dev_forward_skb(dev, skb2);
skb2->dev = dev;
+ skb_sender_cpu_clear(skb2);
return dev_queue_xmit(skb2);
}
goto out;
/* We're copying the filter that has been originally attached,
- * so no conversion/decode needed anymore.
+ * so no conversion/decode needed anymore. eBPF programs that
+ * have no original program cannot be dumped through this.
*/
+ ret = -EACCES;
fprog = filter->prog->orig_prog;
+ if (!fprog)
+ goto out;
ret = fprog->len;
if (!len)
#include <linux/of_platform.h>
#include <linux/of_net.h>
#include <linux/sysfs.h>
+#include <linux/phy_fixed.h>
#include "dsa_priv.h"
char dsa_driver_version[] = "0.1";
if (ret < 0)
goto out;
- ds->slave_mii_bus = mdiobus_alloc();
+ ds->slave_mii_bus = devm_mdiobus_alloc(parent);
if (ds->slave_mii_bus == NULL) {
ret = -ENOMEM;
goto out;
ret = mdiobus_register(ds->slave_mii_bus);
if (ret < 0)
- goto out_free;
+ goto out;
/*
return ret;
-out_free:
- mdiobus_free(ds->slave_mii_bus);
out:
- kfree(ds);
return ret;
}
/*
* Allocate and initialise switch state.
*/
- ds = kzalloc(sizeof(*ds) + drv->priv_size, GFP_KERNEL);
+ ds = devm_kzalloc(parent, sizeof(*ds) + drv->priv_size, GFP_KERNEL);
if (ds == NULL)
return ERR_PTR(-ENOMEM);
static void dsa_switch_destroy(struct dsa_switch *ds)
{
+ struct device_node *port_dn;
+ struct phy_device *phydev;
+ struct dsa_chip_data *cd = ds->pd;
+ int port;
+
#ifdef CONFIG_NET_DSA_HWMON
if (ds->hwmon_dev)
hwmon_device_unregister(ds->hwmon_dev);
#endif
+
+ /* Disable configuration of the CPU and DSA ports */
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if (!(dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)))
+ continue;
+
+ port_dn = cd->port_dn[port];
+ if (of_phy_is_fixed_link(port_dn)) {
+ phydev = of_phy_find_device(port_dn);
+ if (phydev) {
+ int addr = phydev->addr;
+
+ phy_device_free(phydev);
+ of_node_put(port_dn);
+ fixed_phy_del(addr);
+ }
+ }
+ }
+
+ /* Destroy network devices for physical switch ports. */
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if (!(ds->phys_port_mask & (1 << port)))
+ continue;
+
+ if (!ds->ports[port])
+ continue;
+
+ unregister_netdev(ds->ports[port]);
+ free_netdev(ds->ports[port]);
+ }
+
+ mdiobus_unregister(ds->slave_mii_bus);
}
#ifdef CONFIG_PM_SLEEP
}
#endif
-static void dsa_setup_dst(struct dsa_switch_tree *dst, struct net_device *dev,
- struct device *parent, struct dsa_platform_data *pd)
+static int dsa_setup_dst(struct dsa_switch_tree *dst, struct net_device *dev,
+ struct device *parent, struct dsa_platform_data *pd)
{
int i;
+ unsigned configured = 0;
dst->pd = pd;
dst->master_netdev = dev;
dst->ds[i] = ds;
if (ds->drv->poll_link != NULL)
dst->link_poll_needed = 1;
+
+ ++configured;
}
+ /*
+ * If no switch was found, exit cleanly
+ */
+ if (!configured)
+ return -EPROBE_DEFER;
+
/*
* If we use a tagging format that doesn't have an ethertype
* field, make sure that all packets from this point on get
dst->link_poll_timer.expires = round_jiffies(jiffies + HZ);
add_timer(&dst->link_poll_timer);
}
+
+ return 0;
}
static int dsa_probe(struct platform_device *pdev)
goto out;
}
- dst = kzalloc(sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (dst == NULL) {
dev_put(dev);
ret = -ENOMEM;
platform_set_drvdata(pdev, dst);
- dsa_setup_dst(dst, dev, &pdev->dev, pd);
+ ret = dsa_setup_dst(dst, dev, &pdev->dev, pd);
+ if (ret)
+ goto out;
return 0;
for (i = 0; i < dst->pd->nr_chips; i++) {
struct dsa_switch *ds = dst->ds[i];
- if (ds != NULL)
+ if (ds)
dsa_switch_destroy(ds);
}
}
if (!skb)
return;
- skb_dst_set(skb, dst);
+ skb_dst_set(skb, dst_clone(dst));
arp_xmit(skb);
}
}
if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE))
- dst = dst_clone(skb_dst(skb));
+ dst = skb_dst(skb);
arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
dst_hw, dev->dev_addr, NULL, dst);
}
} else {
pneigh_enqueue(&arp_tbl,
in_dev->arp_parms, skb);
- return 0;
+ goto out_free_dst;
}
goto out;
}
out:
consume_skb(skb);
+out_free_dst:
+ dst_release(reply_dst);
return 0;
}
do {
/* record parent and next child index */
pn = n;
- cindex = key ? get_index(key, pn) : 0;
+ cindex = (key > pn->key) ? get_index(key, pn) : 0;
if (cindex >> pn->bits)
break;
SKB_GSO_TCP_ECN |
SKB_GSO_GRE |
SKB_GSO_GRE_CSUM |
- SKB_GSO_IPIP)))
+ SKB_GSO_IPIP |
+ SKB_GSO_SIT)))
goto out;
if (!skb->encapsulation)
static bool reqsk_queue_unlink(struct request_sock_queue *queue,
struct request_sock *req)
{
- struct listen_sock *lopt = queue->listen_opt;
struct request_sock **prev;
+ struct listen_sock *lopt;
bool found = false;
spin_lock(&queue->syn_wait_lock);
-
- for (prev = &lopt->syn_table[req->rsk_hash]; *prev != NULL;
- prev = &(*prev)->dl_next) {
- if (*prev == req) {
- *prev = req->dl_next;
- found = true;
- break;
+ lopt = queue->listen_opt;
+ if (lopt) {
+ for (prev = &lopt->syn_table[req->rsk_hash]; *prev != NULL;
+ prev = &(*prev)->dl_next) {
+ if (*prev == req) {
+ *prev = req->dl_next;
+ found = true;
+ break;
+ }
}
}
-
spin_unlock(&queue->syn_wait_lock);
if (timer_pending(&req->rsk_timer) && del_timer_sync(&req->rsk_timer))
reqsk_put(req);
csum ? SKB_GSO_GRE_CSUM : SKB_GSO_GRE);
}
+static struct rtable *gre_get_rt(struct sk_buff *skb,
+ struct net_device *dev,
+ struct flowi4 *fl,
+ const struct ip_tunnel_key *key)
+{
+ struct net *net = dev_net(dev);
+
+ memset(fl, 0, sizeof(*fl));
+ fl->daddr = key->u.ipv4.dst;
+ fl->saddr = key->u.ipv4.src;
+ fl->flowi4_tos = RT_TOS(key->tos);
+ fl->flowi4_mark = skb->mark;
+ fl->flowi4_proto = IPPROTO_GRE;
+
+ return ip_route_output_key(net, fl);
+}
+
static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip_tunnel_info *tun_info;
- struct net *net = dev_net(dev);
const struct ip_tunnel_key *key;
struct flowi4 fl;
struct rtable *rt;
goto err_free_skb;
key = &tun_info->key;
- memset(&fl, 0, sizeof(fl));
- fl.daddr = key->u.ipv4.dst;
- fl.saddr = key->u.ipv4.src;
- fl.flowi4_tos = RT_TOS(key->tos);
- fl.flowi4_mark = skb->mark;
- fl.flowi4_proto = IPPROTO_GRE;
-
- rt = ip_route_output_key(net, &fl);
+ rt = gre_get_rt(skb, dev, &fl, key);
if (IS_ERR(rt))
goto err_free_skb;
dev->stats.tx_dropped++;
}
+static int gre_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
+{
+ struct ip_tunnel_info *info = skb_tunnel_info(skb);
+ struct rtable *rt;
+ struct flowi4 fl4;
+
+ if (ip_tunnel_info_af(info) != AF_INET)
+ return -EINVAL;
+
+ rt = gre_get_rt(skb, dev, &fl4, &info->key);
+ if (IS_ERR(rt))
+ return PTR_ERR(rt);
+
+ ip_rt_put(rt);
+ info->key.u.ipv4.src = fl4.saddr;
+ return 0;
+}
+
static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
struct net_device *dev)
{
.ndo_change_mtu = ip_tunnel_change_mtu,
.ndo_get_stats64 = ip_tunnel_get_stats64,
.ndo_get_iflink = ip_tunnel_get_iflink,
+ .ndo_fill_metadata_dst = gre_fill_metadata_dst,
};
static void ipgre_tap_setup(struct net_device *dev)
config NF_DUP_IPV4
tristate "Netfilter IPv4 packet duplication to alternate destination"
+ depends on !NF_CONNTRACK || NF_CONNTRACK
help
This option enables the nf_dup_ipv4 core, which duplicates an IPv4
packet to be rerouted to another destination.
if (FIB_RES_DEV(res) == dev)
dev_match = true;
#endif
- if (dev_match || flags & XT_RPFILTER_LOOSE)
- return FIB_RES_NH(res).nh_scope <= RT_SCOPE_HOST;
- return dev_match;
+ return dev_match || flags & XT_RPFILTER_LOOSE;
}
static bool rpfilter_is_local(const struct sk_buff *skb)
/* alpha = (1 - g) * alpha + g * F */
- alpha -= alpha >> dctcp_shift_g;
+ alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g);
if (bytes_ecn) {
/* If dctcp_shift_g == 1, a 32bit value would overflow
* after 8 Mbytes.
*/
tcp_init_nondata_skb(skb, tp->snd_una - !urgent, TCPHDR_ACK);
skb_mstamp_get(&skb->skb_mstamp);
- NET_INC_STATS_BH(sock_net(sk), mib);
+ NET_INC_STATS(sock_net(sk), mib);
return tcp_transmit_skb(sk, skb, 0, GFP_ATOMIC);
}
mtu = dst_mtu(skb_dst(skb));
if (skb->len > mtu) {
+ skb->protocol = htons(ETH_P_IP);
+
if (skb->sk)
xfrm_local_error(skb, mtu);
else
}
addrconf_addr_gen(idev, true);
+ if (dev->flags & IFF_POINTOPOINT)
+ addrconf_add_mroute(dev);
}
#endif
struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
int flags, pol_lookup_t lookup)
{
+ struct rt6_info *rt;
struct fib_lookup_arg arg = {
.lookup_ptr = lookup,
.flags = FIB_LOOKUP_NOREF,
fib_rules_lookup(net->ipv6.fib6_rules_ops,
flowi6_to_flowi(fl6), flags, &arg);
- if (arg.result)
- return arg.result;
+ rt = arg.result;
- dst_hold(&net->ipv6.ip6_null_entry->dst);
- return &net->ipv6.ip6_null_entry->dst;
+ if (!rt) {
+ dst_hold(&net->ipv6.ip6_null_entry->dst);
+ return &net->ipv6.ip6_null_entry->dst;
+ }
+
+ if (rt->rt6i_flags & RTF_REJECT &&
+ rt->dst.error == -EAGAIN) {
+ ip6_rt_put(rt);
+ rt = net->ipv6.ip6_null_entry;
+ dst_hold(&rt->dst);
+ }
+
+ return &rt->dst;
}
static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
int flags, pol_lookup_t lookup)
{
- return (struct dst_entry *) lookup(net, net->ipv6.fib6_main_tbl, fl6, flags);
+ struct rt6_info *rt;
+
+ rt = lookup(net, net->ipv6.fib6_main_tbl, fl6, flags);
+ if (rt->rt6i_flags & RTF_REJECT &&
+ rt->dst.error == -EAGAIN) {
+ ip6_rt_put(rt);
+ rt = net->ipv6.ip6_null_entry;
+ dst_hold(&rt->dst);
+ }
+
+ return &rt->dst;
}
static void __net_init fib6_tables_init(struct net *net)
if (skb->pkt_type != PACKET_HOST)
goto drop;
+ if (unlikely(skb->sk))
+ goto drop;
+
if (skb_warn_if_lro(skb))
goto drop;
if (np->frag_size)
mtu = np->frag_size;
}
+ if (mtu < hlen + sizeof(struct frag_hdr) + 8)
+ goto fail_toobig;
mtu -= hlen + sizeof(struct frag_hdr);
frag_id = ipv6_select_ident(net, &ipv6_hdr(skb)->daddr,
#ifdef CONFIG_IPV6_SUBTREES
ip6_rt_check(&rt->rt6i_src, &fl6->saddr, np->saddr_cache) ||
#endif
- (fl6->flowi6_oif && fl6->flowi6_oif != dst->dev->ifindex)) {
+ (!(fl6->flowi6_flags & FLOWI_FLAG_SKIP_NH_OIF) &&
+ (fl6->flowi6_oif && fl6->flowi6_oif != dst->dev->ifindex))) {
dst_release(dst);
dst = NULL;
}
config NF_DUP_IPV6
tristate "Netfilter IPv6 packet duplication to alternate destination"
+ depends on !NF_CONNTRACK || NF_CONNTRACK
help
This option enables the nf_dup_ipv6 core, which duplicates an IPv6
packet to be rerouted to another destination.
s = s2;
}
}
+EXPORT_SYMBOL_GPL(nf_ct_frag6_consume_orig);
static int nf_ct_net_init(struct net *net)
{
struct net_device *loopback_dev = net->loopback_dev;
int cpu;
+ if (dev == loopback_dev)
+ return;
+
for_each_possible_cpu(cpu) {
struct uncached_list *ul = per_cpu_ptr(&rt6_uncached_list, cpu);
struct rt6_info *rt;
struct inet6_dev *rt_idev = rt->rt6i_idev;
struct net_device *rt_dev = rt->dst.dev;
- if (rt_idev && (rt_idev->dev == dev || !dev) &&
- rt_idev->dev != loopback_dev) {
+ if (rt_idev->dev == dev) {
rt->rt6i_idev = in6_dev_get(loopback_dev);
in6_dev_put(rt_idev);
}
- if (rt_dev && (rt_dev == dev || !dev) &&
- rt_dev != loopback_dev) {
+ if (rt_dev == dev) {
rt->dst.dev = loopback_dev;
dev_hold(rt->dst.dev);
dev_put(rt_dev);
{
}
-static u32 *ip6_rt_blackhole_cow_metrics(struct dst_entry *dst,
- unsigned long old)
-{
- return NULL;
-}
-
static struct dst_ops ip6_dst_blackhole_ops = {
.family = AF_INET6,
.destroy = ip6_dst_destroy,
.default_advmss = ip6_default_advmss,
.update_pmtu = ip6_rt_blackhole_update_pmtu,
.redirect = ip6_rt_blackhole_redirect,
- .cow_metrics = ip6_rt_blackhole_cow_metrics,
+ .cow_metrics = dst_cow_metrics_generic,
.neigh_lookup = ip6_neigh_lookup,
};
#endif
+static void rt6_info_init(struct rt6_info *rt)
+{
+ struct dst_entry *dst = &rt->dst;
+
+ memset(dst + 1, 0, sizeof(*rt) - sizeof(*dst));
+ INIT_LIST_HEAD(&rt->rt6i_siblings);
+ INIT_LIST_HEAD(&rt->rt6i_uncached);
+}
+
/* allocate dst with ip6_dst_ops */
static struct rt6_info *__ip6_dst_alloc(struct net *net,
struct net_device *dev,
struct rt6_info *rt = dst_alloc(&net->ipv6.ip6_dst_ops, dev,
0, DST_OBSOLETE_FORCE_CHK, flags);
- if (rt) {
- struct dst_entry *dst = &rt->dst;
+ if (rt)
+ rt6_info_init(rt);
- memset(dst + 1, 0, sizeof(*rt) - sizeof(*dst));
- INIT_LIST_HEAD(&rt->rt6i_siblings);
- INIT_LIST_HEAD(&rt->rt6i_uncached);
- }
return rt;
}
fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
saved_fn = fn;
+ if (fl6->flowi6_flags & FLOWI_FLAG_SKIP_NH_OIF)
+ oif = 0;
+
redo_rt6_select:
rt = rt6_select(fn, oif, strict);
if (rt->rt6i_nsiblings)
struct flowi6 *fl6)
{
int flags = 0;
+ bool any_src;
fl6->flowi6_iif = LOOPBACK_IFINDEX;
+ any_src = ipv6_addr_any(&fl6->saddr);
if ((sk && sk->sk_bound_dev_if) || rt6_need_strict(&fl6->daddr) ||
- fl6->flowi6_oif)
+ (fl6->flowi6_oif && any_src))
flags |= RT6_LOOKUP_F_IFACE;
- if (!ipv6_addr_any(&fl6->saddr))
+ if (!any_src)
flags |= RT6_LOOKUP_F_HAS_SADDR;
else if (sk)
flags |= rt6_srcprefs2flags(inet6_sk(sk)->srcprefs);
rt = dst_alloc(&ip6_dst_blackhole_ops, ort->dst.dev, 1, DST_OBSOLETE_NONE, 0);
if (rt) {
- new = &rt->dst;
-
- memset(new + 1, 0, sizeof(*rt) - sizeof(*new));
+ rt6_info_init(rt);
+ new = &rt->dst;
new->__use = 1;
new->input = dst_discard;
new->output = dst_discard_sk;
- if (dst_metrics_read_only(&ort->dst))
- new->_metrics = ort->dst._metrics;
- else
- dst_copy_metrics(new, &ort->dst);
+ dst_copy_metrics(new, &ort->dst);
rt->rt6i_idev = ort->rt6i_idev;
if (rt->rt6i_idev)
in6_dev_hold(rt->rt6i_idev);
rt->rt6i_gateway = ort->rt6i_gateway;
- rt->rt6i_flags = ort->rt6i_flags;
+ rt->rt6i_flags = ort->rt6i_flags & ~RTF_PCPU;
rt->rt6i_metric = 0;
memcpy(&rt->rt6i_dst, &ort->rt6i_dst, sizeof(struct rt6key));
fib6_clean_all(net, fib6_ifdown, &adn);
icmp6_clean_all(fib6_ifdown, &adn);
- rt6_uncached_list_flush_dev(net, dev);
+ if (dev)
+ rt6_uncached_list_flush_dev(net, dev);
}
struct rt6_mtu_change_arg {
if (!skb->ignore_df && skb->len > mtu) {
skb->dev = dst->dev;
+ skb->protocol = htons(ETH_P_IPV6);
if (xfrm6_local_dontfrag(skb))
xfrm6_local_rxpmtu(skb, mtu);
struct dst_entry *dst = skb_dst(skb);
struct xfrm_state *x = dst->xfrm;
int mtu;
+ bool toobig;
#ifdef CONFIG_NETFILTER
if (!x) {
}
#endif
+ if (x->props.mode != XFRM_MODE_TUNNEL)
+ goto skip_frag;
+
if (skb->protocol == htons(ETH_P_IPV6))
mtu = ip6_skb_dst_mtu(skb);
else
mtu = dst_mtu(skb_dst(skb));
- if (skb->len > mtu && xfrm6_local_dontfrag(skb)) {
+ toobig = skb->len > mtu && !skb_is_gso(skb);
+
+ if (toobig && xfrm6_local_dontfrag(skb)) {
xfrm6_local_rxpmtu(skb, mtu);
return -EMSGSIZE;
- } else if (!skb->ignore_df && skb->len > mtu && skb->sk) {
+ } else if (!skb->ignore_df && toobig && skb->sk) {
xfrm_local_error(skb, mtu);
return -EMSGSIZE;
}
- if (x->props.mode == XFRM_MODE_TUNNEL &&
- ((skb->len > mtu && !skb_is_gso(skb)) ||
- dst_allfrag(skb_dst(skb)))) {
+ if (toobig || dst_allfrag(skb_dst(skb)))
return ip6_fragment(sk, skb,
x->outer_mode->afinfo->output_finish);
- }
+
+skip_frag:
return x->outer_mode->afinfo->output_finish(sk, skb);
}
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_oif = oif;
+ fl6.flowi6_flags = FLOWI_FLAG_SKIP_NH_OIF;
memcpy(&fl6.daddr, daddr, sizeof(fl6.daddr));
if (saddr)
memcpy(&fl6.saddr, saddr, sizeof(fl6.saddr));
return;
case IPPROTO_ICMPV6:
- if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
+ if (!onlyproto && (nh + offset + 2 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 2 - skb->data))) {
u8 *icmp;
nh = skb_network_header(skb);
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_MH:
offset += ipv6_optlen(exthdr);
- if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
+ if (!onlyproto && (nh + offset + 3 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 3 - skb->data))) {
struct ip6_mh *mh;
nh = skb_network_header(skb);
for (element = hashbin_get_first(iter->hashbin);
element != NULL;
element = hashbin_get_next(iter->hashbin)) {
- if (!off || *off-- == 0) {
+ if (!off || (*off)-- == 0) {
/* NB: hashbin left locked */
return element;
}
err2 = pfkey_broadcast_one(skb, &skb2, GFP_ATOMIC, sk);
- /* Error is cleare after succecful sending to at least one
+ /* Error is cleared after successful sending to at least one
* registered KM */
if ((broadcast_flags & BROADCAST_REGISTERED) && err)
err = err2;
for (i = 0; i < NUM_IEEE80211_HW_FLAGS; i++) {
if (test_bit(i, local->hw.flags))
- pos += scnprintf(pos, end - pos, "%s",
+ pos += scnprintf(pos, end - pos, "%s\n",
hw_flag_names[i]);
}
* when it wakes up for the next time.
*/
set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT);
+ ieee80211_clear_fast_xmit(sta);
/*
* This code races in the following way:
if (!tx->sta)
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
- else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT))
+ else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) {
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ ieee80211_check_fast_xmit(tx->sta);
+ }
info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT;
if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
test_sta_flag(sta, WLAN_STA_PS_DRIVER) ||
- test_sta_flag(sta, WLAN_STA_PS_DELIVER))
+ test_sta_flag(sta, WLAN_STA_PS_DELIVER) ||
+ test_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT))
goto out;
if (sdata->noack_map)
#endif
synchronize_net();
nf_queue_nf_hook_drop(net, &entry->ops);
+ /* other cpu might still process nfqueue verdict that used reg */
+ synchronize_net();
kfree(entry);
}
EXPORT_SYMBOL(nf_unregister_net_hook);
ip_set_timeout_expired(ext_timeout(n, set))))
n = NULL;
- e = kzalloc(set->dsize, GFP_KERNEL);
+ e = kzalloc(set->dsize, GFP_ATOMIC);
if (!e)
return -ENOMEM;
e->id = d->id;
int pos, idx, shift;
err = 0;
- netlink_table_grab();
+ netlink_lock_table();
for (pos = 0; pos * 8 < nlk->ngroups; pos += sizeof(u32)) {
if (len - pos < sizeof(u32))
break;
}
if (put_user(ALIGN(nlk->ngroups / 8, sizeof(u32)), optlen))
err = -EFAULT;
- netlink_table_ungrab();
+ netlink_unlock_table();
break;
}
case NETLINK_CAP_ACK:
struct sk_buff *skb = NULL;
struct nlmsghdr *nlh;
int len, err = -ENOBUFS;
+ int alloc_min_size;
int alloc_size;
mutex_lock(nlk->cb_mutex);
goto errout_skb;
}
- cb = &nlk->cb;
- alloc_size = max_t(int, cb->min_dump_alloc, NLMSG_GOODSIZE);
-
if (!netlink_rx_is_mmaped(sk) &&
atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
goto errout_skb;
* to reduce number of system calls on dump operations, if user
* ever provided a big enough buffer.
*/
- if (alloc_size < nlk->max_recvmsg_len) {
- skb = netlink_alloc_skb(sk,
- nlk->max_recvmsg_len,
- nlk->portid,
+ cb = &nlk->cb;
+ alloc_min_size = max_t(int, cb->min_dump_alloc, NLMSG_GOODSIZE);
+
+ if (alloc_min_size < nlk->max_recvmsg_len) {
+ alloc_size = nlk->max_recvmsg_len;
+ skb = netlink_alloc_skb(sk, alloc_size, nlk->portid,
GFP_KERNEL |
__GFP_NOWARN |
__GFP_NORETRY);
- /* available room should be exact amount to avoid MSG_TRUNC */
- if (skb)
- skb_reserve(skb, skb_tailroom(skb) -
- nlk->max_recvmsg_len);
}
- if (!skb)
+ if (!skb) {
+ alloc_size = alloc_min_size;
skb = netlink_alloc_skb(sk, alloc_size, nlk->portid,
GFP_KERNEL);
+ }
if (!skb)
goto errout_skb;
+
+ /* Trim skb to allocated size. User is expected to provide buffer as
+ * large as max(min_dump_alloc, 16KiB (mac_recvmsg_len capped at
+ * netlink_recvmsg())). dump will pack as many smaller messages as
+ * could fit within the allocated skb. skb is typically allocated
+ * with larger space than required (could be as much as near 2x the
+ * requested size with align to next power of 2 approach). Allowing
+ * dump to use the excess space makes it difficult for a user to have a
+ * reasonable static buffer based on the expected largest dump of a
+ * single netdev. The outcome is MSG_TRUNC error.
+ */
+ skb_reserve(skb, skb_tailroom(skb) - alloc_size);
netlink_skb_set_owner_r(skb, sk);
len = cb->dump(skb, cb);
{
if (skb_network_offset(skb) > MAX_L2_LEN) {
OVS_NLERR(1, "L2 header too long to fragment");
- return;
+ goto err;
}
if (ethertype == htons(ETH_P_IP)) {
struct rt6_info ovs_rt;
if (!v6ops) {
- kfree_skb(skb);
- return;
+ goto err;
}
prepare_frag(vport, skb);
WARN_ONCE(1, "Failed fragment ->%s: eth=%04x, MRU=%d, MTU=%d.",
ovs_vport_name(vport), ntohs(ethertype), mru,
vport->dev->mtu);
- kfree_skb(skb);
+ goto err;
}
+
+ return;
+err:
+ kfree_skb(skb);
}
static void do_output(struct datapath *dp, struct sk_buff *skb, int out_port,
struct sw_flow_key *key, const struct nlattr *attr,
const struct nlattr *actions, int actions_len)
{
- struct ip_tunnel_info info;
struct dp_upcall_info upcall;
const struct nlattr *a;
int rem;
if (vport) {
int err;
- upcall.egress_tun_info = &info;
- err = ovs_vport_get_egress_tun_info(vport, skb,
- &upcall);
- if (err)
- upcall.egress_tun_info = NULL;
+ err = dev_fill_metadata_dst(vport->dev, skb);
+ if (!err)
+ upcall.egress_tun_info = skb_tunnel_info(skb);
}
break;
case OVS_KEY_ATTR_CT_STATE:
case OVS_KEY_ATTR_CT_ZONE:
case OVS_KEY_ATTR_CT_MARK:
- case OVS_KEY_ATTR_CT_LABEL:
+ case OVS_KEY_ATTR_CT_LABELS:
err = -EINVAL;
break;
}
break;
case OVS_ACTION_ATTR_CT:
+ if (!is_flow_key_valid(key)) {
+ err = ovs_flow_key_update(skb, key);
+ if (err)
+ return err;
+ }
+
err = ovs_ct_execute(ovs_dp_get_net(dp), skb, key,
nla_data(a));
/* Hide stolen IP fragments from user space. */
- if (err == -EINPROGRESS)
- return 0;
+ if (err)
+ return err == -EINPROGRESS ? 0 : err;
break;
}
};
/* Metadata label for masked write to conntrack label. */
-struct md_label {
- struct ovs_key_ct_label value;
- struct ovs_key_ct_label mask;
+struct md_labels {
+ struct ovs_key_ct_labels value;
+ struct ovs_key_ct_labels mask;
};
/* Conntrack action context for execution. */
struct nf_conntrack_helper *helper;
struct nf_conntrack_zone zone;
struct nf_conn *ct;
- u32 flags;
+ u8 commit : 1;
u16 family;
struct md_mark mark;
- struct md_label label;
+ struct md_labels labels;
};
static u16 key_to_nfproto(const struct sw_flow_key *key)
#endif
}
-static void ovs_ct_get_label(const struct nf_conn *ct,
- struct ovs_key_ct_label *label)
+static void ovs_ct_get_labels(const struct nf_conn *ct,
+ struct ovs_key_ct_labels *labels)
{
struct nf_conn_labels *cl = ct ? nf_ct_labels_find(ct) : NULL;
if (cl) {
size_t len = cl->words * sizeof(long);
- if (len > OVS_CT_LABEL_LEN)
- len = OVS_CT_LABEL_LEN;
- else if (len < OVS_CT_LABEL_LEN)
- memset(label, 0, OVS_CT_LABEL_LEN);
- memcpy(label, cl->bits, len);
+ if (len > OVS_CT_LABELS_LEN)
+ len = OVS_CT_LABELS_LEN;
+ else if (len < OVS_CT_LABELS_LEN)
+ memset(labels, 0, OVS_CT_LABELS_LEN);
+ memcpy(labels, cl->bits, len);
} else {
- memset(label, 0, OVS_CT_LABEL_LEN);
+ memset(labels, 0, OVS_CT_LABELS_LEN);
}
}
key->ct.state = state;
key->ct.zone = zone->id;
key->ct.mark = ovs_ct_get_mark(ct);
- ovs_ct_get_label(ct, &key->ct.label);
+ ovs_ct_get_labels(ct, &key->ct.labels);
}
/* Update 'key' based on skb->nfct. If 'post_ct' is true, then OVS has
ct = nf_ct_get(skb, &ctinfo);
if (ct) {
state = ovs_ct_get_state(ctinfo);
+ if (!nf_ct_is_confirmed(ct))
+ state |= OVS_CS_F_NEW;
if (ct->master)
state |= OVS_CS_F_RELATED;
zone = nf_ct_zone(ct);
int ovs_ct_put_key(const struct sw_flow_key *key, struct sk_buff *skb)
{
- if (nla_put_u8(skb, OVS_KEY_ATTR_CT_STATE, key->ct.state))
+ if (nla_put_u32(skb, OVS_KEY_ATTR_CT_STATE, key->ct.state))
return -EMSGSIZE;
if (IS_ENABLED(CONFIG_NF_CONNTRACK_ZONES) &&
return -EMSGSIZE;
if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
- nla_put(skb, OVS_KEY_ATTR_CT_LABEL, sizeof(key->ct.label),
- &key->ct.label))
+ nla_put(skb, OVS_KEY_ATTR_CT_LABELS, sizeof(key->ct.labels),
+ &key->ct.labels))
return -EMSGSIZE;
return 0;
#endif
}
-static int ovs_ct_set_label(struct sk_buff *skb, struct sw_flow_key *key,
- const struct ovs_key_ct_label *label,
- const struct ovs_key_ct_label *mask)
+static int ovs_ct_set_labels(struct sk_buff *skb, struct sw_flow_key *key,
+ const struct ovs_key_ct_labels *labels,
+ const struct ovs_key_ct_labels *mask)
{
enum ip_conntrack_info ctinfo;
struct nf_conn_labels *cl;
struct nf_conn *ct;
int err;
- if (!IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS))
- return -ENOTSUPP;
-
/* The connection could be invalid, in which case set_label is no-op.*/
ct = nf_ct_get(skb, &ctinfo);
if (!ct)
nf_ct_labels_ext_add(ct);
cl = nf_ct_labels_find(ct);
}
- if (!cl || cl->words * sizeof(long) < OVS_CT_LABEL_LEN)
+ if (!cl || cl->words * sizeof(long) < OVS_CT_LABELS_LEN)
return -ENOSPC;
- err = nf_connlabels_replace(ct, (u32 *)label, (u32 *)mask,
- OVS_CT_LABEL_LEN / sizeof(u32));
+ err = nf_connlabels_replace(ct, (u32 *)labels, (u32 *)mask,
+ OVS_CT_LABELS_LEN / sizeof(u32));
if (err)
return err;
- ovs_ct_get_label(ct, &key->ct.label);
+ ovs_ct_get_labels(ct, &key->ct.labels);
return 0;
}
return helper->help(skb, protoff, ct, ctinfo);
}
+/* Returns 0 on success, -EINPROGRESS if 'skb' is stolen, or other nonzero
+ * value if 'skb' is freed.
+ */
static int handle_fragments(struct net *net, struct sw_flow_key *key,
u16 zone, struct sk_buff *skb)
{
return err;
ovs_cb.mru = IPCB(skb)->frag_max_size;
- } else if (key->eth.type == htons(ETH_P_IPV6)) {
#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
+ } else if (key->eth.type == htons(ETH_P_IPV6)) {
enum ip6_defrag_users user = IP6_DEFRAG_CONNTRACK_IN + zone;
struct sk_buff *reasm;
if (!reasm)
return -EINPROGRESS;
- if (skb == reasm)
+ if (skb == reasm) {
+ kfree_skb(skb);
return -EINVAL;
+ }
+
+ /* Don't free 'skb' even though it is one of the original
+ * fragments, as we're going to morph it into the head.
+ */
+ skb_get(skb);
+ nf_ct_frag6_consume_orig(reasm);
key->ip.proto = ipv6_hdr(reasm)->nexthdr;
skb_morph(skb, reasm);
+ skb->next = reasm->next;
consume_skb(reasm);
ovs_cb.mru = IP6CB(skb)->frag_max_size;
-#else
- return -EPFNOSUPPORT;
#endif
} else {
+ kfree_skb(skb);
return -EPFNOSUPPORT;
}
return true;
}
-static int __ovs_ct_lookup(struct net *net, const struct sw_flow_key *key,
+static int __ovs_ct_lookup(struct net *net, struct sw_flow_key *key,
const struct ovs_conntrack_info *info,
struct sk_buff *skb)
{
}
}
+ ovs_ct_update_key(skb, key, true);
+
return 0;
}
err = __ovs_ct_lookup(net, key, info, skb);
if (err)
return err;
-
- ovs_ct_update_key(skb, key, true);
}
return 0;
if (nf_conntrack_confirm(skb) != NF_ACCEPT)
return -EINVAL;
- ovs_ct_update_key(skb, key, true);
-
return 0;
}
-static bool label_nonzero(const struct ovs_key_ct_label *label)
+static bool labels_nonzero(const struct ovs_key_ct_labels *labels)
{
size_t i;
- for (i = 0; i < sizeof(*label); i++)
- if (label->ct_label[i])
+ for (i = 0; i < sizeof(*labels); i++)
+ if (labels->ct_labels[i])
return true;
return false;
}
+/* Returns 0 on success, -EINPROGRESS if 'skb' is stolen, or other nonzero
+ * value if 'skb' is freed.
+ */
int ovs_ct_execute(struct net *net, struct sk_buff *skb,
struct sw_flow_key *key,
const struct ovs_conntrack_info *info)
return err;
}
- if (info->flags & OVS_CT_F_COMMIT)
+ if (info->commit)
err = ovs_ct_commit(net, key, info, skb);
else
err = ovs_ct_lookup(net, key, info, skb);
if (err)
goto err;
}
- if (label_nonzero(&info->label.mask))
- err = ovs_ct_set_label(skb, key, &info->label.value,
- &info->label.mask);
+ if (labels_nonzero(&info->labels.mask))
+ err = ovs_ct_set_labels(skb, key, &info->labels.value,
+ &info->labels.mask);
err:
skb_push(skb, nh_ofs);
+ if (err)
+ kfree_skb(skb);
return err;
}
}
static const struct ovs_ct_len_tbl ovs_ct_attr_lens[OVS_CT_ATTR_MAX + 1] = {
- [OVS_CT_ATTR_FLAGS] = { .minlen = sizeof(u32),
- .maxlen = sizeof(u32) },
+ [OVS_CT_ATTR_COMMIT] = { .minlen = 0, .maxlen = 0 },
[OVS_CT_ATTR_ZONE] = { .minlen = sizeof(u16),
.maxlen = sizeof(u16) },
[OVS_CT_ATTR_MARK] = { .minlen = sizeof(struct md_mark),
.maxlen = sizeof(struct md_mark) },
- [OVS_CT_ATTR_LABEL] = { .minlen = sizeof(struct md_label),
- .maxlen = sizeof(struct md_label) },
+ [OVS_CT_ATTR_LABELS] = { .minlen = sizeof(struct md_labels),
+ .maxlen = sizeof(struct md_labels) },
[OVS_CT_ATTR_HELPER] = { .minlen = 1,
.maxlen = NF_CT_HELPER_NAME_LEN }
};
}
switch (type) {
- case OVS_CT_ATTR_FLAGS:
- info->flags = nla_get_u32(a);
+ case OVS_CT_ATTR_COMMIT:
+ info->commit = true;
break;
#ifdef CONFIG_NF_CONNTRACK_ZONES
case OVS_CT_ATTR_ZONE:
case OVS_CT_ATTR_MARK: {
struct md_mark *mark = nla_data(a);
+ if (!mark->mask) {
+ OVS_NLERR(log, "ct_mark mask cannot be 0");
+ return -EINVAL;
+ }
info->mark = *mark;
break;
}
#endif
#ifdef CONFIG_NF_CONNTRACK_LABELS
- case OVS_CT_ATTR_LABEL: {
- struct md_label *label = nla_data(a);
+ case OVS_CT_ATTR_LABELS: {
+ struct md_labels *labels = nla_data(a);
- info->label = *label;
+ if (!labels_nonzero(&labels->mask)) {
+ OVS_NLERR(log, "ct_labels mask cannot be 0");
+ return -EINVAL;
+ }
+ info->labels = *labels;
break;
}
#endif
attr == OVS_KEY_ATTR_CT_MARK)
return true;
if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
- attr == OVS_KEY_ATTR_CT_LABEL) {
+ attr == OVS_KEY_ATTR_CT_LABELS) {
struct ovs_net *ovs_net = net_generic(net, ovs_net_id);
return ovs_net->xt_label;
if (!start)
return -EMSGSIZE;
- if (nla_put_u32(skb, OVS_CT_ATTR_FLAGS, ct_info->flags))
+ if (ct_info->commit && nla_put_flag(skb, OVS_CT_ATTR_COMMIT))
return -EMSGSIZE;
if (IS_ENABLED(CONFIG_NF_CONNTRACK_ZONES) &&
nla_put_u16(skb, OVS_CT_ATTR_ZONE, ct_info->zone.id))
return -EMSGSIZE;
- if (IS_ENABLED(CONFIG_NF_CONNTRACK_MARK) &&
+ if (IS_ENABLED(CONFIG_NF_CONNTRACK_MARK) && ct_info->mark.mask &&
nla_put(skb, OVS_CT_ATTR_MARK, sizeof(ct_info->mark),
&ct_info->mark))
return -EMSGSIZE;
if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
- nla_put(skb, OVS_CT_ATTR_LABEL, sizeof(ct_info->label),
- &ct_info->label))
+ labels_nonzero(&ct_info->labels.mask) &&
+ nla_put(skb, OVS_CT_ATTR_LABELS, sizeof(ct_info->labels),
+ &ct_info->labels))
return -EMSGSIZE;
if (ct_info->helper) {
if (nla_put_string(skb, OVS_CT_ATTR_HELPER,
void ovs_ct_init(struct net *net)
{
- unsigned int n_bits = sizeof(struct ovs_key_ct_label) * BITS_PER_BYTE;
+ unsigned int n_bits = sizeof(struct ovs_key_ct_labels) * BITS_PER_BYTE;
struct ovs_net *ovs_net = net_generic(net, ovs_net_id);
if (nf_connlabels_get(net, n_bits)) {
void ovs_ct_fill_key(const struct sk_buff *skb, struct sw_flow_key *key);
int ovs_ct_put_key(const struct sw_flow_key *key, struct sk_buff *skb);
void ovs_ct_free_action(const struct nlattr *a);
+
+#define CT_SUPPORTED_MASK (OVS_CS_F_NEW | OVS_CS_F_ESTABLISHED | \
+ OVS_CS_F_RELATED | OVS_CS_F_REPLY_DIR | \
+ OVS_CS_F_INVALID | OVS_CS_F_TRACKED)
#else
#include <linux/errno.h>
struct sw_flow_key *key,
const struct ovs_conntrack_info *info)
{
+ kfree_skb(skb);
return -ENOTSUPP;
}
key->ct.state = 0;
key->ct.zone = 0;
key->ct.mark = 0;
- memset(&key->ct.label, 0, sizeof(key->ct.label));
+ memset(&key->ct.labels, 0, sizeof(key->ct.labels));
}
static inline int ovs_ct_put_key(const struct sw_flow_key *key,
}
static inline void ovs_ct_free_action(const struct nlattr *a) { }
+
+#define CT_SUPPORTED_MASK 0
#endif /* CONFIG_NF_CONNTRACK */
#endif /* ovs_conntrack.h */
if (upcall_info->egress_tun_info) {
nla = nla_nest_start(user_skb, OVS_PACKET_ATTR_EGRESS_TUN_KEY);
- err = ovs_nla_put_egress_tunnel_key(user_skb,
- upcall_info->egress_tun_info,
- upcall_info->egress_tun_opts);
+ err = ovs_nla_put_tunnel_info(user_skb,
+ upcall_info->egress_tun_info);
BUG_ON(err);
nla_nest_end(user_skb, nla);
}
*/
struct dp_upcall_info {
struct ip_tunnel_info *egress_tun_info;
- const void *egress_tun_opts;
const struct nlattr *userdata;
const struct nlattr *actions;
int actions_len;
u16 zone;
u32 mark;
u8 state;
- struct ovs_key_ct_label label;
+ struct ovs_key_ct_labels labels;
} ct;
} __aligned(BITS_PER_LONG/8); /* Ensure that we can do comparisons as longs. */
+ nla_total_size(4) /* OVS_KEY_ATTR_SKB_MARK */
+ nla_total_size(4) /* OVS_KEY_ATTR_DP_HASH */
+ nla_total_size(4) /* OVS_KEY_ATTR_RECIRC_ID */
- + nla_total_size(1) /* OVS_KEY_ATTR_CT_STATE */
+ + nla_total_size(4) /* OVS_KEY_ATTR_CT_STATE */
+ nla_total_size(2) /* OVS_KEY_ATTR_CT_ZONE */
+ nla_total_size(4) /* OVS_KEY_ATTR_CT_MARK */
- + nla_total_size(16) /* OVS_KEY_ATTR_CT_LABEL */
+ + nla_total_size(16) /* OVS_KEY_ATTR_CT_LABELS */
+ nla_total_size(12) /* OVS_KEY_ATTR_ETHERNET */
+ nla_total_size(2) /* OVS_KEY_ATTR_ETHERTYPE */
+ nla_total_size(4) /* OVS_KEY_ATTR_VLAN */
[OVS_KEY_ATTR_TUNNEL] = { .len = OVS_ATTR_NESTED,
.next = ovs_tunnel_key_lens, },
[OVS_KEY_ATTR_MPLS] = { .len = sizeof(struct ovs_key_mpls) },
- [OVS_KEY_ATTR_CT_STATE] = { .len = sizeof(u8) },
+ [OVS_KEY_ATTR_CT_STATE] = { .len = sizeof(u32) },
[OVS_KEY_ATTR_CT_ZONE] = { .len = sizeof(u16) },
[OVS_KEY_ATTR_CT_MARK] = { .len = sizeof(u32) },
- [OVS_KEY_ATTR_CT_LABEL] = { .len = sizeof(struct ovs_key_ct_label) },
+ [OVS_KEY_ATTR_CT_LABELS] = { .len = sizeof(struct ovs_key_ct_labels) },
};
static bool check_attr_len(unsigned int attr_len, unsigned int expected_len)
if ((output->tun_flags & TUNNEL_OAM) &&
nla_put_flag(skb, OVS_TUNNEL_KEY_ATTR_OAM))
return -EMSGSIZE;
- if (tun_opts) {
+ if (swkey_tun_opts_len) {
if (output->tun_flags & TUNNEL_GENEVE_OPT &&
nla_put(skb, OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS,
swkey_tun_opts_len, tun_opts))
return 0;
}
-int ovs_nla_put_egress_tunnel_key(struct sk_buff *skb,
- const struct ip_tunnel_info *egress_tun_info,
- const void *egress_tun_opts)
+int ovs_nla_put_tunnel_info(struct sk_buff *skb,
+ struct ip_tunnel_info *tun_info)
{
- return __ipv4_tun_to_nlattr(skb, &egress_tun_info->key,
- egress_tun_opts,
- egress_tun_info->options_len);
+ return __ipv4_tun_to_nlattr(skb, &tun_info->key,
+ ip_tunnel_info_opts(tun_info),
+ tun_info->options_len);
}
static int metadata_from_nlattrs(struct net *net, struct sw_flow_match *match,
if (*attrs & (1 << OVS_KEY_ATTR_CT_STATE) &&
ovs_ct_verify(net, OVS_KEY_ATTR_CT_STATE)) {
- u8 ct_state = nla_get_u8(a[OVS_KEY_ATTR_CT_STATE]);
+ u32 ct_state = nla_get_u32(a[OVS_KEY_ATTR_CT_STATE]);
+
+ if (ct_state & ~CT_SUPPORTED_MASK) {
+ OVS_NLERR(log, "ct_state flags %08x unsupported",
+ ct_state);
+ return -EINVAL;
+ }
SW_FLOW_KEY_PUT(match, ct.state, ct_state, is_mask);
*attrs &= ~(1ULL << OVS_KEY_ATTR_CT_STATE);
SW_FLOW_KEY_PUT(match, ct.mark, mark, is_mask);
*attrs &= ~(1ULL << OVS_KEY_ATTR_CT_MARK);
}
- if (*attrs & (1 << OVS_KEY_ATTR_CT_LABEL) &&
- ovs_ct_verify(net, OVS_KEY_ATTR_CT_LABEL)) {
- const struct ovs_key_ct_label *cl;
+ if (*attrs & (1 << OVS_KEY_ATTR_CT_LABELS) &&
+ ovs_ct_verify(net, OVS_KEY_ATTR_CT_LABELS)) {
+ const struct ovs_key_ct_labels *cl;
- cl = nla_data(a[OVS_KEY_ATTR_CT_LABEL]);
- SW_FLOW_KEY_MEMCPY(match, ct.label, cl->ct_label,
+ cl = nla_data(a[OVS_KEY_ATTR_CT_LABELS]);
+ SW_FLOW_KEY_MEMCPY(match, ct.labels, cl->ct_labels,
sizeof(*cl), is_mask);
- *attrs &= ~(1ULL << OVS_KEY_ATTR_CT_LABEL);
+ *attrs &= ~(1ULL << OVS_KEY_ATTR_CT_LABELS);
}
return 0;
}
} else {
memset(nla_data(nla), val, nla_len(nla));
}
+
+ if (nla_type(nla) == OVS_KEY_ATTR_CT_STATE)
+ *(u32 *)nla_data(nla) &= CT_SUPPORTED_MASK;
}
}
case OVS_KEY_ATTR_PRIORITY:
case OVS_KEY_ATTR_SKB_MARK:
case OVS_KEY_ATTR_CT_MARK:
- case OVS_KEY_ATTR_CT_LABEL:
+ case OVS_KEY_ATTR_CT_LABELS:
case OVS_KEY_ATTR_ETHERNET:
break;
if (!start)
return -EMSGSIZE;
- err = ipv4_tun_to_nlattr(skb, &tun_info->key,
- tun_info->options_len ?
- ip_tunnel_info_opts(tun_info) : NULL,
- tun_info->options_len);
+ err = ovs_nla_put_tunnel_info(skb, tun_info);
if (err)
return err;
nla_nest_end(skb, start);
int ovs_nla_get_match(struct net *, struct sw_flow_match *,
const struct nlattr *key, const struct nlattr *mask,
bool log);
-int ovs_nla_put_egress_tunnel_key(struct sk_buff *,
- const struct ip_tunnel_info *,
- const void *egress_tun_opts);
+
+int ovs_nla_put_tunnel_info(struct sk_buff *skb,
+ struct ip_tunnel_info *tun_info);
bool ovs_nla_get_ufid(struct sw_flow_id *, const struct nlattr *, bool log);
int ovs_nla_get_identifier(struct sw_flow_id *sfid, const struct nlattr *ufid,
/* Initialize the default stat node. */
stats = kmem_cache_alloc_node(flow_stats_cache,
- GFP_KERNEL | __GFP_ZERO, 0);
+ GFP_KERNEL | __GFP_ZERO,
+ node_online(0) ? 0 : NUMA_NO_NODE);
if (!stats)
goto err;
return 0;
}
-static int geneve_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
- struct dp_upcall_info *upcall)
-{
- struct geneve_port *geneve_port = geneve_vport(vport);
- struct net *net = ovs_dp_get_net(vport->dp);
- __be16 dport = htons(geneve_port->port_no);
- __be16 sport = udp_flow_src_port(net, skb, 1, USHRT_MAX, true);
-
- return ovs_tunnel_get_egress_info(upcall, ovs_dp_get_net(vport->dp),
- skb, IPPROTO_UDP, sport, dport);
-}
-
static struct vport *geneve_tnl_create(const struct vport_parms *parms)
{
struct net *net = ovs_dp_get_net(parms->dp);
.get_options = geneve_get_options,
.send = ovs_netdev_send,
.owner = THIS_MODULE,
- .get_egress_tun_info = geneve_get_egress_tun_info,
};
static int __init ovs_geneve_tnl_init(void)
return ovs_netdev_link(vport, parms->name);
}
-static int gre_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
- struct dp_upcall_info *upcall)
-{
- return ovs_tunnel_get_egress_info(upcall, ovs_dp_get_net(vport->dp),
- skb, IPPROTO_GRE, 0, 0);
-}
-
static struct vport_ops ovs_gre_vport_ops = {
.type = OVS_VPORT_TYPE_GRE,
.create = gre_create,
.send = ovs_netdev_send,
- .get_egress_tun_info = gre_get_egress_tun_info,
.destroy = ovs_netdev_tunnel_destroy,
.owner = THIS_MODULE,
};
free_netdev(dev);
}
+static struct rtnl_link_stats64 *
+internal_get_stats(struct net_device *dev, struct rtnl_link_stats64 *stats)
+{
+ int i;
+
+ memset(stats, 0, sizeof(*stats));
+ stats->rx_errors = dev->stats.rx_errors;
+ stats->tx_errors = dev->stats.tx_errors;
+ stats->tx_dropped = dev->stats.tx_dropped;
+ stats->rx_dropped = dev->stats.rx_dropped;
+
+ for_each_possible_cpu(i) {
+ const struct pcpu_sw_netstats *percpu_stats;
+ struct pcpu_sw_netstats local_stats;
+ unsigned int start;
+
+ percpu_stats = per_cpu_ptr(dev->tstats, i);
+
+ do {
+ start = u64_stats_fetch_begin_irq(&percpu_stats->syncp);
+ local_stats = *percpu_stats;
+ } while (u64_stats_fetch_retry_irq(&percpu_stats->syncp, start));
+
+ stats->rx_bytes += local_stats.rx_bytes;
+ stats->rx_packets += local_stats.rx_packets;
+ stats->tx_bytes += local_stats.tx_bytes;
+ stats->tx_packets += local_stats.tx_packets;
+ }
+
+ return stats;
+}
+
static const struct net_device_ops internal_dev_netdev_ops = {
.ndo_open = internal_dev_open,
.ndo_stop = internal_dev_stop,
.ndo_start_xmit = internal_dev_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = internal_dev_change_mtu,
+ .ndo_get_stats64 = internal_get_stats,
};
static struct rtnl_link_ops internal_dev_link_ops __read_mostly = {
err = -ENOMEM;
goto error_free_vport;
}
+ vport->dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
+ if (!vport->dev->tstats) {
+ err = -ENOMEM;
+ goto error_free_netdev;
+ }
dev_net_set(vport->dev, ovs_dp_get_net(vport->dp));
internal_dev = internal_dev_priv(vport->dev);
rtnl_lock();
err = register_netdevice(vport->dev);
if (err)
- goto error_free_netdev;
+ goto error_unlock;
dev_set_promiscuity(vport->dev, 1);
rtnl_unlock();
return vport;
-error_free_netdev:
+error_unlock:
rtnl_unlock();
+ free_percpu(vport->dev->tstats);
+error_free_netdev:
free_netdev(vport->dev);
error_free_vport:
ovs_vport_free(vport);
/* unregister_netdevice() waits for an RCU grace period. */
unregister_netdevice(vport->dev);
-
+ free_percpu(vport->dev->tstats);
rtnl_unlock();
}
return ovs_netdev_link(vport, parms->name);
}
-static int vxlan_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
- struct dp_upcall_info *upcall)
-{
- struct vxlan_dev *vxlan = netdev_priv(vport->dev);
- struct net *net = ovs_dp_get_net(vport->dp);
- __be16 dst_port = vxlan_dev_dst_port(vxlan);
- __be16 src_port;
- int port_min;
- int port_max;
-
- inet_get_local_port_range(net, &port_min, &port_max);
- src_port = udp_flow_src_port(net, skb, 0, 0, true);
-
- return ovs_tunnel_get_egress_info(upcall, net,
- skb, IPPROTO_UDP,
- src_port, dst_port);
-}
-
static struct vport_ops ovs_vxlan_netdev_vport_ops = {
.type = OVS_VPORT_TYPE_VXLAN,
.create = vxlan_create,
.destroy = ovs_netdev_tunnel_destroy,
.get_options = vxlan_get_options,
.send = ovs_netdev_send,
- .get_egress_tun_info = vxlan_get_egress_tun_info,
};
static int __init ovs_vxlan_tnl_init(void)
*/
void ovs_vport_get_stats(struct vport *vport, struct ovs_vport_stats *stats)
{
- struct net_device *dev = vport->dev;
- int i;
-
- memset(stats, 0, sizeof(*stats));
- stats->rx_errors = dev->stats.rx_errors;
- stats->tx_errors = dev->stats.tx_errors;
- stats->tx_dropped = dev->stats.tx_dropped;
- stats->rx_dropped = dev->stats.rx_dropped;
-
- stats->rx_dropped += atomic_long_read(&dev->rx_dropped);
- stats->tx_dropped += atomic_long_read(&dev->tx_dropped);
-
- for_each_possible_cpu(i) {
- const struct pcpu_sw_netstats *percpu_stats;
- struct pcpu_sw_netstats local_stats;
- unsigned int start;
-
- percpu_stats = per_cpu_ptr(dev->tstats, i);
-
- do {
- start = u64_stats_fetch_begin_irq(&percpu_stats->syncp);
- local_stats = *percpu_stats;
- } while (u64_stats_fetch_retry_irq(&percpu_stats->syncp, start));
-
- stats->rx_bytes += local_stats.rx_bytes;
- stats->rx_packets += local_stats.rx_packets;
- stats->tx_bytes += local_stats.tx_bytes;
- stats->tx_packets += local_stats.tx_packets;
- }
+ const struct rtnl_link_stats64 *dev_stats;
+ struct rtnl_link_stats64 temp;
+
+ dev_stats = dev_get_stats(vport->dev, &temp);
+ stats->rx_errors = dev_stats->rx_errors;
+ stats->tx_errors = dev_stats->tx_errors;
+ stats->tx_dropped = dev_stats->tx_dropped;
+ stats->rx_dropped = dev_stats->rx_dropped;
+
+ stats->rx_bytes = dev_stats->rx_bytes;
+ stats->rx_packets = dev_stats->rx_packets;
+ stats->tx_bytes = dev_stats->tx_bytes;
+ stats->tx_packets = dev_stats->tx_packets;
}
/**
OVS_CB(skb)->input_vport = vport;
OVS_CB(skb)->mru = 0;
+ if (unlikely(dev_net(skb->dev) != ovs_dp_get_net(vport->dp))) {
+ u32 mark;
+
+ mark = skb->mark;
+ skb_scrub_packet(skb, true);
+ skb->mark = mark;
+ tun_info = NULL;
+ }
+
/* Extract flow from 'skb' into 'key'. */
error = ovs_flow_key_extract(tun_info, skb, &key);
if (unlikely(error)) {
call_rcu(&vport->rcu, free_vport_rcu);
}
EXPORT_SYMBOL_GPL(ovs_vport_deferred_free);
-
-int ovs_tunnel_get_egress_info(struct dp_upcall_info *upcall,
- struct net *net,
- struct sk_buff *skb,
- u8 ipproto,
- __be16 tp_src,
- __be16 tp_dst)
-{
- struct ip_tunnel_info *egress_tun_info = upcall->egress_tun_info;
- const struct ip_tunnel_info *tun_info = skb_tunnel_info(skb);
- const struct ip_tunnel_key *tun_key;
- u32 skb_mark = skb->mark;
- struct rtable *rt;
- struct flowi4 fl;
-
- if (unlikely(!tun_info))
- return -EINVAL;
- if (ip_tunnel_info_af(tun_info) != AF_INET)
- return -EINVAL;
-
- tun_key = &tun_info->key;
-
- /* Route lookup to get srouce IP address.
- * The process may need to be changed if the corresponding process
- * in vports ops changed.
- */
- rt = ovs_tunnel_route_lookup(net, tun_key, skb_mark, &fl, ipproto);
- if (IS_ERR(rt))
- return PTR_ERR(rt);
-
- ip_rt_put(rt);
-
- /* Generate egress_tun_info based on tun_info,
- * saddr, tp_src and tp_dst
- */
- ip_tunnel_key_init(&egress_tun_info->key,
- fl.saddr, tun_key->u.ipv4.dst,
- tun_key->tos,
- tun_key->ttl,
- tp_src, tp_dst,
- tun_key->tun_id,
- tun_key->tun_flags);
- egress_tun_info->options_len = tun_info->options_len;
- egress_tun_info->mode = tun_info->mode;
- upcall->egress_tun_opts = ip_tunnel_info_opts(egress_tun_info);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ovs_tunnel_get_egress_info);
-
-int ovs_vport_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
- struct dp_upcall_info *upcall)
-{
- /* get_egress_tun_info() is only implemented on tunnel ports. */
- if (unlikely(!vport->ops->get_egress_tun_info))
- return -EINVAL;
-
- return vport->ops->get_egress_tun_info(vport, skb, upcall);
-}
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/u64_stats_sync.h>
-#include <net/route.h>
#include "datapath.h"
int ovs_vport_get_upcall_portids(const struct vport *, struct sk_buff *);
u32 ovs_vport_find_upcall_portid(const struct vport *, struct sk_buff *);
-int ovs_tunnel_get_egress_info(struct dp_upcall_info *upcall,
- struct net *net,
- struct sk_buff *,
- u8 ipproto,
- __be16 tp_src,
- __be16 tp_dst);
-
-int ovs_vport_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
- struct dp_upcall_info *upcall);
-
/**
* struct vport_portids - array of netlink portids of a vport.
* must be protected by rcu.
* have any configuration.
* @send: Send a packet on the device.
* zero for dropped packets or negative for error.
- * @get_egress_tun_info: Get the egress tunnel 5-tuple and other info for
- * a packet.
*/
struct vport_ops {
enum ovs_vport_type type;
int (*get_options)(const struct vport *, struct sk_buff *);
void (*send)(struct vport *, struct sk_buff *);
- int (*get_egress_tun_info)(struct vport *, struct sk_buff *,
- struct dp_upcall_info *upcall);
-
struct module *owner;
struct list_head list;
};
int ovs_vport_ops_register(struct vport_ops *ops);
void ovs_vport_ops_unregister(struct vport_ops *ops);
-static inline struct rtable *ovs_tunnel_route_lookup(struct net *net,
- const struct ip_tunnel_key *key,
- u32 mark,
- struct flowi4 *fl,
- u8 protocol)
-{
- struct rtable *rt;
-
- memset(fl, 0, sizeof(*fl));
- fl->daddr = key->u.ipv4.dst;
- fl->saddr = key->u.ipv4.src;
- fl->flowi4_tos = RT_TOS(key->tos);
- fl->flowi4_mark = mark;
- fl->flowi4_proto = protocol;
-
- rt = ip_route_output_key(net, fl);
- return rt;
-}
-
static inline void ovs_vport_send(struct vport *vport, struct sk_buff *skb)
{
vport->ops->send(vport, skb);
}
to_copy = min(tc->t_tinc_data_rem, left);
- pskb_pull(clone, offset);
- pskb_trim(clone, to_copy);
+ if (!pskb_pull(clone, offset) ||
+ pskb_trim(clone, to_copy)) {
+ pr_warn("rds_tcp_data_recv: pull/trim failed "
+ "left %zu data_rem %zu skb_len %d\n",
+ left, tc->t_tinc_data_rem, skb->len);
+ kfree_skb(clone);
+ desc->error = -ENOMEM;
+ goto out;
+ }
skb_queue_tail(&tinc->ti_skb_list, clone);
rdsdebug("skb %p data %p len %d off %u to_copy %zu -> "
#define MIRRED_TAB_MASK 7
static LIST_HEAD(mirred_list);
+static DEFINE_SPINLOCK(mirred_list_lock);
static void tcf_mirred_release(struct tc_action *a, int bind)
{
struct tcf_mirred *m = to_mirred(a);
struct net_device *dev = rcu_dereference_protected(m->tcfm_dev, 1);
+ /* We could be called either in a RCU callback or with RTNL lock held. */
+ spin_lock_bh(&mirred_list_lock);
list_del(&m->tcfm_list);
+ spin_unlock_bh(&mirred_list_lock);
if (dev)
dev_put(dev);
}
} else {
if (bind)
return 0;
- if (!ovr) {
- tcf_hash_release(a, bind);
+
+ tcf_hash_release(a, bind);
+ if (!ovr)
return -EEXIST;
- }
}
m = to_mirred(a);
}
if (ret == ACT_P_CREATED) {
+ spin_lock_bh(&mirred_list_lock);
list_add(&m->tcfm_list, &mirred_list);
+ spin_unlock_bh(&mirred_list_lock);
tcf_hash_insert(a);
}
skb2->skb_iif = skb->dev->ifindex;
skb2->dev = dev;
+ skb_sender_cpu_clear(skb2);
err = dev_queue_xmit(skb2);
if (err) {
struct tcf_mirred *m;
ASSERT_RTNL();
- if (event == NETDEV_UNREGISTER)
+ if (event == NETDEV_UNREGISTER) {
+ spin_lock_bh(&mirred_list_lock);
list_for_each_entry(m, &mirred_list, tcfm_list) {
if (rcu_access_pointer(m->tcfm_dev) == dev) {
dev_put(dev);
RCU_INIT_POINTER(m->tcfm_dev, NULL);
}
}
+ spin_unlock_bh(&mirred_list_lock);
+ }
return NOTIFY_DONE;
}
return bucket - q->buckets;
}
+static unsigned int hhf_qdisc_drop(struct Qdisc *sch)
+{
+ unsigned int prev_backlog;
+
+ prev_backlog = sch->qstats.backlog;
+ hhf_drop(sch);
+ return prev_backlog - sch->qstats.backlog;
+}
+
static int hhf_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
struct hhf_sched_data *q = qdisc_priv(sch);
.enqueue = hhf_enqueue,
.dequeue = hhf_dequeue,
.peek = qdisc_peek_dequeued,
- .drop = hhf_drop,
+ .drop = hhf_qdisc_drop,
.init = hhf_init,
.reset = hhf_reset,
.destroy = hhf_destroy,
ctxt->direction = DMA_FROM_DEVICE;
ctxt->read_hdr = head;
pages_needed = min_t(int, pages_needed, xprt->sc_max_sge_rd);
- read = min_t(int, pages_needed << PAGE_SHIFT, rs_length);
+ read = min_t(int, (pages_needed << PAGE_SHIFT) - *page_offset,
+ rs_length);
for (pno = 0; pno < pages_needed; pno++) {
int len = min_t(int, rs_length, PAGE_SIZE - pg_off);
ctxt->direction = DMA_FROM_DEVICE;
ctxt->frmr = frmr;
pages_needed = min_t(int, pages_needed, xprt->sc_frmr_pg_list_len);
- read = min_t(int, pages_needed << PAGE_SHIFT, rs_length);
+ read = min_t(int, (pages_needed << PAGE_SHIFT) - *page_offset,
+ rs_length);
frmr->kva = page_address(rqstp->rq_arg.pages[pg_no]);
frmr->direction = DMA_FROM_DEVICE;
rqstp->rq_arg.page_base = head->arg.page_base;
/* rq_respages starts after the last arg page */
- rqstp->rq_respages = &rqstp->rq_arg.pages[page_no];
+ rqstp->rq_respages = &rqstp->rq_pages[page_no];
rqstp->rq_next_page = rqstp->rq_respages + 1;
/* Rebuild rq_arg head and tail. */
}
if (memreg == RPCRDMA_FRMR) {
- /* Requires both frmr reg and local dma lkey */
- if (((devattr->device_cap_flags &
- (IB_DEVICE_MEM_MGT_EXTENSIONS|IB_DEVICE_LOCAL_DMA_LKEY)) !=
- (IB_DEVICE_MEM_MGT_EXTENSIONS|IB_DEVICE_LOCAL_DMA_LKEY)) ||
- (devattr->max_fast_reg_page_list_len == 0)) {
+ if (!(devattr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS) ||
+ (devattr->max_fast_reg_page_list_len == 0)) {
dprintk("RPC: %s: FRMR registration "
"not supported by HCA\n", __func__);
memreg = RPCRDMA_MTHCAFMR;
if (!ia->ri_device->alloc_fmr) {
dprintk("RPC: %s: MTHCAFMR registration "
"not supported by HCA\n", __func__);
+ rc = -EINVAL;
goto out3;
}
}
#include <linux/notifier.h>
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
#include <net/ip_fib.h>
#include <net/switchdev.h>
if (nla_len(attr) != sizeof(struct bridge_vlan_info))
return -EINVAL;
vinfo = nla_data(attr);
+ if (!vinfo->vid || vinfo->vid >= VLAN_VID_MASK)
+ return -EINVAL;
vlan->flags = vinfo->flags;
if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN) {
if (vlan->vid_begin)
goto out;
ret = register_pernet_subsys(&sysctl_pernet_ops);
if (ret)
- goto out;
+ goto out1;
register_sysctl_root(&net_sysctl_root);
out:
return ret;
+out1:
+ unregister_sysctl_table(net_header);
+ net_header = NULL;
+ goto out;
}
struct ctl_table_header *register_net_sysctl(struct net *net,
#include "core.h"
#define MAX_PKT_DEFAULT_MCAST 1500 /* bcast link max packet size (fixed) */
-#define BCLINK_WIN_DEFAULT 20 /* bcast link window size (default) */
+#define BCLINK_WIN_DEFAULT 50 /* bcast link window size (default) */
+#define BCLINK_WIN_MIN 32 /* bcast minimum link window size */
const char tipc_bclink_name[] = "broadcast-link";
if (!bcl)
return -ENOPROTOOPT;
- if ((limit < TIPC_MIN_LINK_WIN) || (limit > TIPC_MAX_LINK_WIN))
+ if (limit < BCLINK_WIN_MIN)
+ limit = BCLINK_WIN_MIN;
+ if (limit > TIPC_MAX_LINK_WIN)
return -EINVAL;
-
tipc_bclink_lock(net);
tipc_link_set_queue_limits(bcl, limit);
tipc_bclink_unlock(net);
{
struct sk_buff *head = *headbuf;
struct sk_buff *frag = *buf;
- struct sk_buff *tail;
+ struct sk_buff *tail = NULL;
struct tipc_msg *msg;
u32 fragid;
int delta;
if (unlikely(skb_unclone(frag, GFP_ATOMIC)))
goto err;
head = *headbuf = frag;
- skb_frag_list_init(head);
- TIPC_SKB_CB(head)->tail = NULL;
*buf = NULL;
+ TIPC_SKB_CB(head)->tail = NULL;
+ if (skb_is_nonlinear(head)) {
+ skb_walk_frags(head, tail) {
+ TIPC_SKB_CB(head)->tail = tail;
+ }
+ } else {
+ skb_frag_list_init(head);
+ }
return 0;
}
if (likely((usr <= TIPC_CRITICAL_IMPORTANCE) && !msg_errcode(m)))
return usr;
if ((usr == MSG_FRAGMENTER) || (usr == MSG_BUNDLER))
- return msg_bits(m, 5, 13, 0x7);
+ return msg_bits(m, 9, 0, 0x7);
return TIPC_SYSTEM_IMPORTANCE;
}
int usr = msg_user(m);
if (likely((usr == MSG_FRAGMENTER) || (usr == MSG_BUNDLER)))
- msg_set_bits(m, 5, 13, 0x7, i);
+ msg_set_bits(m, 9, 0, 0x7, i);
else if (i < TIPC_SYSTEM_IMPORTANCE)
msg_set_user(m, i);
else
}
/* Ignore duplicate packets */
- if (less(oseqno, rcv_nxt))
+ if ((usr != LINK_PROTOCOL) && less(oseqno, rcv_nxt))
return true;
/* Initiate or update failover mode if applicable */
if (!pl || !tipc_link_is_up(pl))
return true;
- /* Initiate or update synch mode if applicable */
- if ((usr == TUNNEL_PROTOCOL) && (mtyp == SYNCH_MSG)) {
+ /* Initiate synch mode if applicable */
+ if ((usr == TUNNEL_PROTOCOL) && (mtyp == SYNCH_MSG) && (oseqno == 1)) {
syncpt = iseqno + exp_pkts - 1;
if (!tipc_link_is_up(l)) {
tipc_link_fsm_evt(l, LINK_ESTABLISH_EVT);
#include <linux/tipc_netlink.h>
#include "core.h"
#include "bearer.h"
+#include "msg.h"
/* IANA assigned UDP port */
#define UDP_PORT_DEFAULT 6118
+#define UDP_MIN_HEADROOM 28
+
static const struct nla_policy tipc_nl_udp_policy[TIPC_NLA_UDP_MAX + 1] = {
[TIPC_NLA_UDP_UNSPEC] = {.type = NLA_UNSPEC},
[TIPC_NLA_UDP_LOCAL] = {.type = NLA_BINARY,
struct sk_buff *clone;
struct rtable *rt;
+ if (skb_headroom(skb) < UDP_MIN_HEADROOM)
+ pskb_expand_head(skb, UDP_MIN_HEADROOM, 0, GFP_ATOMIC);
+
clone = skb_clone(skb, GFP_ATOMIC);
skb_set_inner_protocol(clone, htons(ETH_P_TIPC));
ub = rcu_dereference_rtnl(b->media_ptr);
{
struct udp_bearer *ub;
struct tipc_bearer *b;
+ int usr = msg_user(buf_msg(skb));
+
+ if ((usr == LINK_PROTOCOL) || (usr == NAME_DISTRIBUTOR))
+ skb_linearize(skb);
ub = rcu_dereference_sk_user_data(sk);
if (!ub) {
goto out;
}
+ if (flags & MSG_PEEK)
+ skip = sk_peek_offset(sk, flags);
+ else
+ skip = 0;
+
do {
int chunk;
struct sk_buff *skb, *last;
break;
}
- skip = sk_peek_offset(sk, flags);
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
last = skb;
if (UNIXCB(skb).fp)
scm.fp = scm_fp_dup(UNIXCB(skb).fp);
- if (skip) {
- sk_peek_offset_fwd(sk, chunk);
- skip -= chunk;
- }
+ sk_peek_offset_fwd(sk, chunk);
if (UNIXCB(skb).fp)
break;
+ skip = 0;
last = skb;
last_len = skb->len;
unix_state_lock(sk);
err = misc_register(&vsock_device);
if (err) {
pr_err("Failed to register misc device\n");
- return -ENOENT;
+ goto err_reset_transport;
}
err = proto_register(&vsock_proto, 1); /* we want our slab */
if (err) {
pr_err("Cannot register vsock protocol\n");
- goto err_misc_deregister;
+ goto err_deregister_misc;
}
err = sock_register(&vsock_family_ops);
err_unregister_proto:
proto_unregister(&vsock_proto);
-err_misc_deregister:
+err_deregister_misc:
misc_deregister(&vsock_device);
+err_reset_transport:
transport = NULL;
err_busy:
mutex_unlock(&vsock_register_mutex);
static int vmci_transport_recv_dgram_cb(void *data, struct vmci_datagram *dg);
static int vmci_transport_recv_stream_cb(void *data, struct vmci_datagram *dg);
-static void vmci_transport_peer_attach_cb(u32 sub_id,
- const struct vmci_event_data *ed,
- void *client_data);
static void vmci_transport_peer_detach_cb(u32 sub_id,
const struct vmci_event_data *ed,
void *client_data);
static void vmci_transport_recv_pkt_work(struct work_struct *work);
+static void vmci_transport_cleanup(struct work_struct *work);
static int vmci_transport_recv_listen(struct sock *sk,
struct vmci_transport_packet *pkt);
static int vmci_transport_recv_connecting_server(
struct vmci_transport_packet pkt;
};
+static LIST_HEAD(vmci_transport_cleanup_list);
+static DEFINE_SPINLOCK(vmci_transport_cleanup_lock);
+static DECLARE_WORK(vmci_transport_cleanup_work, vmci_transport_cleanup);
+
static struct vmci_handle vmci_transport_stream_handle = { VMCI_INVALID_ID,
VMCI_INVALID_ID };
static u32 vmci_transport_qp_resumed_sub_id = VMCI_INVALID_ID;
return err;
}
-static void vmci_transport_peer_attach_cb(u32 sub_id,
- const struct vmci_event_data *e_data,
- void *client_data)
-{
- struct sock *sk = client_data;
- const struct vmci_event_payload_qp *e_payload;
- struct vsock_sock *vsk;
-
- e_payload = vmci_event_data_const_payload(e_data);
-
- vsk = vsock_sk(sk);
-
- /* We don't ask for delayed CBs when we subscribe to this event (we
- * pass 0 as flags to vmci_event_subscribe()). VMCI makes no
- * guarantees in that case about what context we might be running in,
- * so it could be BH or process, blockable or non-blockable. So we
- * need to account for all possible contexts here.
- */
- local_bh_disable();
- bh_lock_sock(sk);
-
- /* XXX This is lame, we should provide a way to lookup sockets by
- * qp_handle.
- */
- if (vmci_handle_is_equal(vmci_trans(vsk)->qp_handle,
- e_payload->handle)) {
- /* XXX This doesn't do anything, but in the future we may want
- * to set a flag here to verify the attach really did occur and
- * we weren't just sent a datagram claiming it was.
- */
- goto out;
- }
-
-out:
- bh_unlock_sock(sk);
- local_bh_enable();
-}
-
static void vmci_transport_handle_detach(struct sock *sk)
{
struct vsock_sock *vsk;
const struct vmci_event_data *e_data,
void *client_data)
{
- struct sock *sk = client_data;
+ struct vmci_transport *trans = client_data;
const struct vmci_event_payload_qp *e_payload;
- struct vsock_sock *vsk;
e_payload = vmci_event_data_const_payload(e_data);
- vsk = vsock_sk(sk);
- if (vmci_handle_is_invalid(e_payload->handle))
- return;
-
- /* Same rules for locking as for peer_attach_cb(). */
- local_bh_disable();
- bh_lock_sock(sk);
/* XXX This is lame, we should provide a way to lookup sockets by
* qp_handle.
*/
- if (vmci_handle_is_equal(vmci_trans(vsk)->qp_handle,
- e_payload->handle))
- vmci_transport_handle_detach(sk);
+ if (vmci_handle_is_invalid(e_payload->handle) ||
+ vmci_handle_is_equal(trans->qp_handle, e_payload->handle))
+ return;
- bh_unlock_sock(sk);
- local_bh_enable();
+ /* We don't ask for delayed CBs when we subscribe to this event (we
+ * pass 0 as flags to vmci_event_subscribe()). VMCI makes no
+ * guarantees in that case about what context we might be running in,
+ * so it could be BH or process, blockable or non-blockable. So we
+ * need to account for all possible contexts here.
+ */
+ spin_lock_bh(&trans->lock);
+ if (!trans->sk)
+ goto out;
+
+ /* Apart from here, trans->lock is only grabbed as part of sk destruct,
+ * where trans->sk isn't locked.
+ */
+ bh_lock_sock(trans->sk);
+
+ vmci_transport_handle_detach(trans->sk);
+
+ bh_unlock_sock(trans->sk);
+ out:
+ spin_unlock_bh(&trans->lock);
}
static void vmci_transport_qp_resumed_cb(u32 sub_id,
*/
err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_DETACH,
vmci_transport_peer_detach_cb,
- pending, &detach_sub_id);
+ vmci_trans(vpending), &detach_sub_id);
if (err < VMCI_SUCCESS) {
vmci_transport_send_reset(pending, pkt);
err = vmci_transport_error_to_vsock_error(err);
|| vmci_trans(vsk)->qpair
|| vmci_trans(vsk)->produce_size != 0
|| vmci_trans(vsk)->consume_size != 0
- || vmci_trans(vsk)->attach_sub_id != VMCI_INVALID_ID
|| vmci_trans(vsk)->detach_sub_id != VMCI_INVALID_ID) {
skerr = EPROTO;
err = -EINVAL;
struct vsock_sock *vsk;
struct vmci_handle handle;
struct vmci_qp *qpair;
- u32 attach_sub_id;
u32 detach_sub_id;
bool is_local;
u32 flags;
vsk = vsock_sk(sk);
handle = VMCI_INVALID_HANDLE;
- attach_sub_id = VMCI_INVALID_ID;
detach_sub_id = VMCI_INVALID_ID;
/* If we have gotten here then we should be past the point where old
goto destroy;
}
- /* Subscribe to attach and detach events first.
+ /* Subscribe to detach events first.
*
* XXX We attach once for each queue pair created for now so it is easy
* to find the socket (it's provided), but later we should only
* subscribe once and add a way to lookup sockets by queue pair handle.
*/
- err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_ATTACH,
- vmci_transport_peer_attach_cb,
- sk, &attach_sub_id);
- if (err < VMCI_SUCCESS) {
- err = vmci_transport_error_to_vsock_error(err);
- goto destroy;
- }
-
err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_DETACH,
vmci_transport_peer_detach_cb,
- sk, &detach_sub_id);
+ vmci_trans(vsk), &detach_sub_id);
if (err < VMCI_SUCCESS) {
err = vmci_transport_error_to_vsock_error(err);
goto destroy;
vmci_trans(vsk)->produce_size = vmci_trans(vsk)->consume_size =
pkt->u.size;
- vmci_trans(vsk)->attach_sub_id = attach_sub_id;
vmci_trans(vsk)->detach_sub_id = detach_sub_id;
vmci_trans(vsk)->notify_ops->process_negotiate(sk);
return 0;
destroy:
- if (attach_sub_id != VMCI_INVALID_ID)
- vmci_event_unsubscribe(attach_sub_id);
-
if (detach_sub_id != VMCI_INVALID_ID)
vmci_event_unsubscribe(detach_sub_id);
vmci_trans(vsk)->qp_handle = VMCI_INVALID_HANDLE;
vmci_trans(vsk)->qpair = NULL;
vmci_trans(vsk)->produce_size = vmci_trans(vsk)->consume_size = 0;
- vmci_trans(vsk)->attach_sub_id = vmci_trans(vsk)->detach_sub_id =
- VMCI_INVALID_ID;
+ vmci_trans(vsk)->detach_sub_id = VMCI_INVALID_ID;
vmci_trans(vsk)->notify_ops = NULL;
+ INIT_LIST_HEAD(&vmci_trans(vsk)->elem);
+ vmci_trans(vsk)->sk = &vsk->sk;
+ spin_lock_init(&vmci_trans(vsk)->lock);
if (psk) {
vmci_trans(vsk)->queue_pair_size =
vmci_trans(psk)->queue_pair_size;
return 0;
}
-static void vmci_transport_destruct(struct vsock_sock *vsk)
+static void vmci_transport_free_resources(struct list_head *transport_list)
{
- if (vmci_trans(vsk)->attach_sub_id != VMCI_INVALID_ID) {
- vmci_event_unsubscribe(vmci_trans(vsk)->attach_sub_id);
- vmci_trans(vsk)->attach_sub_id = VMCI_INVALID_ID;
- }
+ while (!list_empty(transport_list)) {
+ struct vmci_transport *transport =
+ list_first_entry(transport_list, struct vmci_transport,
+ elem);
+ list_del(&transport->elem);
- if (vmci_trans(vsk)->detach_sub_id != VMCI_INVALID_ID) {
- vmci_event_unsubscribe(vmci_trans(vsk)->detach_sub_id);
- vmci_trans(vsk)->detach_sub_id = VMCI_INVALID_ID;
- }
+ if (transport->detach_sub_id != VMCI_INVALID_ID) {
+ vmci_event_unsubscribe(transport->detach_sub_id);
+ transport->detach_sub_id = VMCI_INVALID_ID;
+ }
- if (!vmci_handle_is_invalid(vmci_trans(vsk)->qp_handle)) {
- vmci_qpair_detach(&vmci_trans(vsk)->qpair);
- vmci_trans(vsk)->qp_handle = VMCI_INVALID_HANDLE;
- vmci_trans(vsk)->produce_size = 0;
- vmci_trans(vsk)->consume_size = 0;
+ if (!vmci_handle_is_invalid(transport->qp_handle)) {
+ vmci_qpair_detach(&transport->qpair);
+ transport->qp_handle = VMCI_INVALID_HANDLE;
+ transport->produce_size = 0;
+ transport->consume_size = 0;
+ }
+
+ kfree(transport);
}
+}
+
+static void vmci_transport_cleanup(struct work_struct *work)
+{
+ LIST_HEAD(pending);
+
+ spin_lock_bh(&vmci_transport_cleanup_lock);
+ list_replace_init(&vmci_transport_cleanup_list, &pending);
+ spin_unlock_bh(&vmci_transport_cleanup_lock);
+ vmci_transport_free_resources(&pending);
+}
+
+static void vmci_transport_destruct(struct vsock_sock *vsk)
+{
+ /* Ensure that the detach callback doesn't use the sk/vsk
+ * we are about to destruct.
+ */
+ spin_lock_bh(&vmci_trans(vsk)->lock);
+ vmci_trans(vsk)->sk = NULL;
+ spin_unlock_bh(&vmci_trans(vsk)->lock);
if (vmci_trans(vsk)->notify_ops)
vmci_trans(vsk)->notify_ops->socket_destruct(vsk);
- kfree(vsk->trans);
+ spin_lock_bh(&vmci_transport_cleanup_lock);
+ list_add(&vmci_trans(vsk)->elem, &vmci_transport_cleanup_list);
+ spin_unlock_bh(&vmci_transport_cleanup_lock);
+ schedule_work(&vmci_transport_cleanup_work);
+
vsk->trans = NULL;
}
static void __exit vmci_transport_exit(void)
{
+ cancel_work_sync(&vmci_transport_cleanup_work);
+ vmci_transport_free_resources(&vmci_transport_cleanup_list);
+
if (!vmci_handle_is_invalid(vmci_transport_stream_handle)) {
if (vmci_datagram_destroy_handle(
vmci_transport_stream_handle) != VMCI_SUCCESS)
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMCI transport for Virtual Sockets");
+MODULE_VERSION("1.0.2.0-k");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("vmware_vsock");
MODULE_ALIAS_NETPROTO(PF_VSOCK);
u64 queue_pair_size;
u64 queue_pair_min_size;
u64 queue_pair_max_size;
- u32 attach_sub_id;
u32 detach_sub_id;
union vmci_transport_notify notify;
struct vmci_transport_notify_ops *notify_ops;
+ struct list_head elem;
+ struct sock *sk;
+ spinlock_t lock; /* protects sk. */
};
int vmci_transport_register(void);
struct nlattr *rp = attrs[XFRMA_REPLAY_VAL];
struct nlattr *re = attrs[XFRMA_REPLAY_ESN_VAL];
struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
+ struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
+ struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
- if (!lt && !rp && !re)
+ if (!lt && !rp && !re && !et && !rt)
return err;
/* pedantic mode - thou shalt sayeth replaceth */
#define PT_REGS_RC(x) ((x)->gprs[2])
#define PT_REGS_SP(x) ((x)->gprs[15])
+#elif defined(__aarch64__)
+
+#define PT_REGS_PARM1(x) ((x)->regs[0])
+#define PT_REGS_PARM2(x) ((x)->regs[1])
+#define PT_REGS_PARM3(x) ((x)->regs[2])
+#define PT_REGS_PARM4(x) ((x)->regs[3])
+#define PT_REGS_PARM5(x) ((x)->regs[4])
+#define PT_REGS_RET(x) ((x)->regs[30])
+#define PT_REGS_FP(x) ((x)->regs[29]) /* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_RC(x) ((x)->regs[0])
+#define PT_REGS_SP(x) ((x)->sp)
+
#endif
#endif
call_threshold := 0
endif
+KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
+
CFLAGS_KASAN_MINIMAL := -fsanitize=kernel-address
CFLAGS_KASAN := $(call cc-option, -fsanitize=kernel-address \
- -fasan-shadow-offset=$(CONFIG_KASAN_SHADOW_OFFSET) \
+ -fasan-shadow-offset=$(KASAN_SHADOW_OFFSET) \
--param asan-stack=1 --param asan-globals=1 \
--param asan-instrumentation-with-call-threshold=$(call_threshold))
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
$< $(silent) --defconfig $(Kconfig)
-else
+else ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),)
@$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
+else
+ @$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'"
+ $(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG)
endif
%_defconfig: $(obj)/conf
BUILD_DEBUG="$(grep -s '^CONFIG_DEBUG_INFO=y' $KCONFIG_CONFIG || true)"
# Setup the directory structure
-rm -rf "$tmpdir" "$fwdir" "$kernel_headers_dir" "$libc_headers_dir" "$dbg_dir"
+rm -rf "$tmpdir" "$fwdir" "$kernel_headers_dir" "$libc_headers_dir" "$dbg_dir" $objtree/debian/files
mkdir -m 755 -p "$tmpdir/DEBIAN"
mkdir -p "$tmpdir/lib" "$tmpdir/boot"
mkdir -p "$fwdir/lib/firmware/$version/"
\$(MAKE) KDEB_SOURCENAME=${sourcename} KDEB_PKGVERSION=${packageversion} bindeb-pkg
clean:
- rm -rf debian/*tmp
+ rm -rf debian/*tmp debian/files
mv debian/ debian.backup # debian/ might be cleaned away
\$(MAKE) clean
mv debian.backup debian
kdebug("- %u", key->serial);
key_check(key);
- /* Throw away the key data */
- if (key->type->destroy)
+ /* Throw away the key data if the key is instantiated */
+ if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags) &&
+ !test_bit(KEY_FLAG_NEGATIVE, &key->flags) &&
+ key->type->destroy)
key->type->destroy(key);
security_key_free(key);
kenter("");
+ if (ctx->index_key.type == &key_type_keyring)
+ return ERR_PTR(-EPERM);
+
user = key_user_lookup(current_fsuid());
if (!user)
return ERR_PTR(-ENOMEM);
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <sound/hdaudio_ext.h>
MODULE_DESCRIPTION("HDA extended core");
int dev, err;
err = snd_hda_codec_parse_pcms(codec);
- if (err < 0) {
- snd_hda_codec_reset(codec);
+ if (err < 0)
return err;
- }
/* attach a new PCM streams */
list_for_each_entry(cpcm, &codec->pcm_list_head, list) {
#define AZX_DCAPS_PRESET_CTHDA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB |\
+ AZX_DCAPS_NO_64BIT |\
AZX_DCAPS_4K_BDLE_BOUNDARY | AZX_DCAPS_SNOOP_OFF)
/*
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
+ AZX_DCAPS_NO_64BIT |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#else
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009),
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
+ AZX_DCAPS_NO_64BIT |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
/* CM8888 */
SND_PCI_QUIRK(0x106b, 0x5e00, "MacBookPro 11,2", CS4208_MBP11),
SND_PCI_QUIRK(0x106b, 0x7100, "MacBookAir 6,1", CS4208_MBA6),
SND_PCI_QUIRK(0x106b, 0x7200, "MacBookAir 6,2", CS4208_MBA6),
+ SND_PCI_QUIRK(0x106b, 0x7b00, "MacBookPro 12,1", CS4208_MBP11),
{} /* terminator */
};
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
+ SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
ALC292_FIXUP_DELL_E7X,
ALC292_FIXUP_DISABLE_AAMIX,
ALC298_FIXUP_DELL1_MIC_NO_PRESENCE,
+ ALC275_FIXUP_DELL_XPS,
};
static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MODE
},
+ [ALC275_FIXUP_DELL_XPS] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ /* Enables internal speaker */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x1f},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x00c0},
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x30},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x00b1},
+ {}
+ }
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
return err;
spec = codec->spec;
- codec->power_save_node = 1;
+ /* enable power_save_node only for new 92HD89xx chips, as it causes
+ * click noises on old 92HD73xx chips.
+ */
+ if ((codec->core.vendor_id & 0xfffffff0) != 0x111d7670)
+ codec->power_save_node = 1;
spec->linear_tone_beep = 0;
spec->gen.mixer_nid = 0x1d;
spec->have_spdif_mux = 1;
.cpu_dai_name = "au1xpsc_i2s.2",
.platform_name = "au1xpsc-pcm.2",
.codec_name = "wm8731.0-001b",
+ .dai_fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &db1200_i2s_wm8731_ops,
};
.cpu_dai_name = "au1xpsc_i2s.3",
.platform_name = "au1xpsc-pcm.3",
.codec_name = "wm8731.0-001b",
+ .dai_fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &db1200_i2s_wm8731_ops,
};
};
static struct reg_default rt298_index_def[] = {
- { 0x01, 0xaaaa },
- { 0x02, 0x8aaa },
+ { 0x01, 0xa5a8 },
+ { 0x02, 0x8e95 },
{ 0x03, 0x0002 },
- { 0x04, 0xaf01 },
- { 0x08, 0x000d },
- { 0x09, 0xd810 },
- { 0x0a, 0x0120 },
+ { 0x04, 0xaf67 },
+ { 0x08, 0x200f },
+ { 0x09, 0xd010 },
+ { 0x0a, 0x0100 },
{ 0x0b, 0x0000 },
{ 0x0d, 0x2800 },
- { 0x0f, 0x0000 },
- { 0x19, 0x0a17 },
+ { 0x0f, 0x0022 },
+ { 0x19, 0x0217 },
{ 0x20, 0x0020 },
{ 0x33, 0x0208 },
{ 0x46, 0x0300 },
- { 0x49, 0x0004 },
- { 0x4f, 0x50e9 },
- { 0x50, 0x2000 },
- { 0x63, 0x2902 },
+ { 0x49, 0x4004 },
+ { 0x4f, 0x50c9 },
+ { 0x50, 0x3000 },
+ { 0x63, 0x1b02 },
{ 0x67, 0x1111 },
{ 0x68, 0x1016 },
{ 0x69, 0x273f },
mdelay(10);
if (!rt298->pdata.gpio2_en)
- regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0x4000);
+ regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0x40);
else
regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0);
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv),
/* ADC Boost Volume Control */
- SOC_DOUBLE_TLV("STO1 ADC Boost Gain", RT5645_ADC_BST_VOL1,
+ SOC_DOUBLE_TLV("ADC Boost Capture Volume", RT5645_ADC_BST_VOL1,
RT5645_STO1_ADC_L_BST_SFT, RT5645_STO1_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
- SOC_DOUBLE_TLV("STO2 ADC Boost Gain", RT5645_ADC_BST_VOL1,
- RT5645_STO2_ADC_L_BST_SFT, RT5645_STO2_ADC_R_BST_SFT, 3, 0,
+ SOC_DOUBLE_TLV("Mono ADC Boost Capture Volume", RT5645_ADC_BST_VOL2,
+ RT5645_MONO_ADC_L_BST_SFT, RT5645_MONO_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
/* I2S2 function select */
#define RT5645_STO1_ADC_DIG_VOL 0x1c
#define RT5645_MONO_ADC_DIG_VOL 0x1d
#define RT5645_ADC_BST_VOL1 0x1e
-/* Mixer - D-D */
#define RT5645_ADC_BST_VOL2 0x20
+/* Mixer - D-D */
#define RT5645_STO1_ADC_MIXER 0x27
#define RT5645_MONO_ADC_MIXER 0x28
#define RT5645_AD_DA_MIXER 0x29
#define RT5645_STO1_ADC_R_BST_SFT 12
#define RT5645_STO1_ADC_COMP_MASK (0x3 << 10)
#define RT5645_STO1_ADC_COMP_SFT 10
-#define RT5645_STO2_ADC_L_BST_MASK (0x3 << 8)
-#define RT5645_STO2_ADC_L_BST_SFT 8
-#define RT5645_STO2_ADC_R_BST_MASK (0x3 << 6)
-#define RT5645_STO2_ADC_R_BST_SFT 6
-#define RT5645_STO2_ADC_COMP_MASK (0x3 << 4)
-#define RT5645_STO2_ADC_COMP_SFT 4
+
+/* ADC Boost Volume Control (0x20) */
+#define RT5645_MONO_ADC_L_BST_MASK (0x3 << 14)
+#define RT5645_MONO_ADC_L_BST_SFT 14
+#define RT5645_MONO_ADC_R_BST_MASK (0x3 << 12)
+#define RT5645_MONO_ADC_R_BST_SFT 12
+#define RT5645_MONO_ADC_COMP_MASK (0x3 << 10)
+#define RT5645_MONO_ADC_COMP_SFT 10
/* Stereo2 ADC Mixer Control (0x26) */
#define RT5645_STO2_ADC_SRC_MASK (0x1 << 15)
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
- SGTL5000_BIAS_R_MASK,
- sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
+ SGTL5000_BIAS_VOLT_MASK,
+ sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
/*
* disable DAP
* TODO:
else {
sgtl5000->micbias_voltage = 0;
dev_err(&client->dev,
- "Unsuitable MicBias resistor\n");
+ "Unsuitable MicBias voltage\n");
}
} else {
sgtl5000->micbias_voltage = 0;
/*
* DAC digital volumes. From -7 to 24 dB in 1 dB steps
*/
-static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 0);
+static DECLARE_TLV_DB_SCALE(dac_tlv, -700, 100, 0);
static const char * const tas2552_din_source_select[] = {
"Muted",
snd_soc_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
snd_soc_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
- /* Line2 to HP Bypass default volume, disconnect from Output Mixer */
- snd_soc_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
- snd_soc_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
- snd_soc_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
- snd_soc_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
- /* Line2 Line Out default volume, disconnect from Output Mixer */
- snd_soc_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
- snd_soc_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
+ /* On tlv320aic3104, these registers are reserved and must not be written */
+ if (aic3x->model != AIC3X_MODEL_3104) {
+ /* Line2 to HP Bypass default volume, disconnect from Output Mixer */
+ snd_soc_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
+ /* Line2 Line Out default volume, disconnect from Output Mixer */
+ snd_soc_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
+ }
switch (aic3x->model) {
case AIC3X_MODEL_3X:
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8962, &wm8962_dai, 1);
if (ret < 0)
- goto err_enable;
+ goto err_pm_runtime;
regcache_cache_only(wm8962->regmap, true);
return 0;
+err_pm_runtime:
+ pm_runtime_disable(&i2c->dev);
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
err:
static int wm8962_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
+ pm_runtime_disable(&client->dev);
return 0;
}
wm8962_reset(wm8962);
+ regcache_mark_dirty(wm8962->regmap);
+
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
*/
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
for (i = 0; i < 4; i++)
- i2s_write_reg(dev->i2s_base, TOR(i), 0);
+ i2s_read_reg(dev->i2s_base, TOR(i));
} else {
for (i = 0; i < 4; i++)
- i2s_write_reg(dev->i2s_base, ROR(i), 0);
+ i2s_read_reg(dev->i2s_base, ROR(i));
}
}
static void i2s_start(struct dw_i2s_dev *dev,
struct snd_pcm_substream *substream)
{
-
+ u32 i, irq;
i2s_write_reg(dev->i2s_base, IER, 1);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ for (i = 0; i < 4; i++) {
+ irq = i2s_read_reg(dev->i2s_base, IMR(i));
+ i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
+ }
i2s_write_reg(dev->i2s_base, ITER, 1);
- else
+ } else {
+ for (i = 0; i < 4; i++) {
+ irq = i2s_read_reg(dev->i2s_base, IMR(i));
+ i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
+ }
i2s_write_reg(dev->i2s_base, IRER, 1);
+ }
i2s_write_reg(dev->i2s_base, CER, 1);
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/* data on rising edge of bclk, frame low 1clk before data */
- strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+ strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSI |
+ SSI_STCR_TEFS;
scr |= SSI_SCR_NET;
if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
scr &= ~SSI_I2S_MODE_MASK;
break;
case SND_SOC_DAIFMT_LEFT_J:
/* data on rising edge of bclk, frame high with data */
- strcr |= SSI_STCR_TXBIT0;
+ strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_DSP_B:
/* data on rising edge of bclk, frame high with data */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0;
+ strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL;
break;
case SND_SOC_DAIFMT_DSP_A:
/* data on rising edge of bclk, frame high 1clk before data */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
+ strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL |
+ SSI_STCR_TEFS;
break;
}
/* DAI clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_IF:
- strcr |= SSI_STCR_TFSI;
- strcr &= ~SSI_STCR_TSCKP;
+ strcr ^= SSI_STCR_TSCKP | SSI_STCR_TFSI;
break;
case SND_SOC_DAIFMT_IB_NF:
- strcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+ strcr ^= SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_NB_IF:
- strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+ strcr ^= SSI_STCR_TFSI;
break;
case SND_SOC_DAIFMT_NB_NF:
- strcr &= ~SSI_STCR_TFSI;
- strcr |= SSI_STCR_TSCKP;
break;
}
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/fsl/guts.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
-#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
*/
#include <linux/module.h>
+#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
-#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
*/
#include <linux/module.h>
+#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
-#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
}
EXPORT_SYMBOL_GPL(snd_soc_info_volsw);
+/**
+ * snd_soc_info_volsw_sx - Mixer info callback for SX TLV controls
+ * @kcontrol: mixer control
+ * @uinfo: control element information
+ *
+ * Callback to provide information about a single mixer control, or a double
+ * mixer control that spans 2 registers of the SX TLV type. SX TLV controls
+ * have a range that represents both positive and negative values either side
+ * of zero but without a sign bit.
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_info_volsw_sx(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+
+ snd_soc_info_volsw(kcontrol, uinfo);
+ /* Max represents the number of levels in an SX control not the
+ * maximum value, so add the minimum value back on
+ */
+ uinfo->value.integer.max += mc->min;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_info_volsw_sx);
+
/**
* snd_soc_get_volsw - single mixer get callback
* @kcontrol: mixer control
struct snd_seq_oss_reg *arg;
struct snd_seq_device *dev;
- if (snd_seq_device_new(emu->card, 0, SNDRV_SEQ_DEV_ID_OSS,
+ /* using device#1 here for avoiding conflicts with OPL3 */
+ if (snd_seq_device_new(emu->card, 1, SNDRV_SEQ_DEV_ID_OSS,
sizeof(struct snd_seq_oss_reg), &dev) < 0)
return;
libperf-y += llvm-utils.o
libperf-y += parse-options.o
libperf-y += parse-events.o
+libperf-y += perf_regs.o
libperf-y += path.o
libperf-y += rbtree.o
libperf-y += bitmap.o
libperf-y += scripting-engines/
-libperf-$(CONFIG_PERF_REGS) += perf_regs.o
libperf-$(CONFIG_ZLIB) += zlib.o
libperf-$(CONFIG_LZMA) += lzma.o
SMPL_REG_END
};
+#ifdef HAVE_PERF_REGS_SUPPORT
int perf_reg_value(u64 *valp, struct regs_dump *regs, int id)
{
int i, idx = 0;
*valp = regs->cache_regs[id];
return 0;
}
+#endif
#define __PERF_REGS_H
#include <linux/types.h>
+#include <linux/compiler.h>
struct regs_dump;
export CFLAGS
-SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian dscr
+SUB_DIRS = benchmarks \
+ copyloops \
+ dscr \
+ mm \
+ pmu \
+ primitives \
+ stringloops \
+ switch_endian \
+ syscalls \
+ tm \
+ vphn
endif
--- /dev/null
+gettimeofday
--- /dev/null
+TEST_PROGS := gettimeofday
+
+CFLAGS += -O2
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
--- /dev/null
+/*
+ * Copyright 2015, Anton Blanchard, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <sys/time.h>
+#include <stdio.h>
+
+#include "utils.h"
+
+static int test_gettimeofday(void)
+{
+ int i;
+
+ struct timeval tv_start, tv_end;
+
+ gettimeofday(&tv_start, NULL);
+
+ for(i = 0; i < 100000000; i++) {
+ gettimeofday(&tv_end, NULL);
+ }
+
+ printf("time = %.6f\n", tv_end.tv_sec - tv_start.tv_sec + (tv_end.tv_usec - tv_start.tv_usec) * 1e-6);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_gettimeofday, "gettimeofday");
+}
{
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
{
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
int cpu, rc;
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
cpu = pick_online_cpu();
FAIL_IF(cpu < 0);
FAIL_IF(bind_to_cpu(cpu));
int cpu, rc;
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
cpu = pick_online_cpu();
FAIL_IF(cpu < 0);
FAIL_IF(bind_to_cpu(cpu));
{
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
uint64_t val;
bool fc_cleared;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
int i;
bool bad_mmcr2;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
+#include <linux/auxvec.h>
#include "trace.h"
#include "reg.h"
mb();
}
+bool ebb_is_supported(void)
+{
+#ifdef PPC_FEATURE2_EBB
+ /* EBB requires at least POWER8 */
+ return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_EBB);
+#else
+ return false;
+#endif
+}
+
void event_ebb_init(struct event *e)
{
e->attr.config |= (1ull << 63);
int ebb_event_enable(struct event *e);
void ebb_global_enable(void);
void ebb_global_disable(void);
+bool ebb_is_supported(void);
void ebb_freeze_pmcs(void);
void ebb_unfreeze_pmcs(void);
void event_ebb_init(struct event *e);
struct event event;
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
FAIL_IF(pipe(read_pipe.fds) == -1);
FAIL_IF(pipe(write_pipe.fds) == -1);
struct event event;
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
FAIL_IF(pipe(read_pipe.fds) == -1);
FAIL_IF(pipe(write_pipe.fds) == -1);
int cpu, rc;
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
cpu = pick_online_cpu();
FAIL_IF(cpu < 0);
FAIL_IF(bind_to_cpu(cpu));
{
struct event event, leader;
+ SKIP_IF(!ebb_is_supported());
+
event_init(&event, 0x1001e);
event_leader_ebb_init(&event);
/* Expected to succeed */
{
pid_t pid;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
struct event event;
uint64_t overhead;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x400FA, "PM_RUN_INST_CMPL");
event_leader_ebb_init(&event);
event.attr.exclude_kernel = 1;
int i, orig_period, max_period;
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
/* We use PMC4 to make sure the kernel switches all counters correctly */
event_init_named(&event, 0x40002, "instructions");
event_leader_ebb_init(&event);
struct event events[6];
int i, group_fd;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&events[0], 0x1001C, "PM_CMPLU_STALL_THRD");
event_init_named(&events[1], 0x2D016, "PM_CMPLU_STALL_FXU");
event_init_named(&events[2], 0x30006, "PM_CMPLU_STALL_OTHER_CMPL");
pid_t pids[NR_CHILDREN];
int cpu, rc, i;
+ SKIP_IF(!ebb_is_supported());
+
cpu = pick_online_cpu();
FAIL_IF(cpu < 0);
FAIL_IF(bind_to_cpu(cpu));
u64 val;
int i;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
{
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
event_init_named(&event, 0x1001e, "cycles");
event_leader_ebb_init(&event);
{
struct event event;
+ SKIP_IF(!ebb_is_supported());
+
/* Use PMC2 so we set PMCjCE, which enables PMC5/6 */
event_init(&event, 0x2001e);
event_leader_ebb_init(&event);
{
uint64_t val, expected;
+ SKIP_IF(!ebb_is_supported());
+
expected = 0x8000000100000000ull;
mtspr(SPRN_BESCR, expected);
val = mfspr(SPRN_BESCR);
pid_t pid;
int rc;
+ SKIP_IF(!ebb_is_supported());
+
FAIL_IF(pipe(read_pipe.fds) == -1);
FAIL_IF(pipe(write_pipe.fds) == -1);
pid_t pid;
int rc;
+ SKIP_IF(!ebb_is_supported());
+
FAIL_IF(pipe(read_pipe.fds) == -1);
FAIL_IF(pipe(write_pipe.fds) == -1);
#define FIXUP_SECTION ".ex_fixup"
+static inline unsigned long __fls(unsigned long x);
+
#include "word-at-a-time.h"
#include "utils.h"
+static inline unsigned long __fls(unsigned long x)
+{
+ int lz;
+
+ asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
+ return sizeof(unsigned long) - 1 - lz;
+}
static int page_size;
static char *mem_region;
--- /dev/null
+ipc_unmuxed
--- /dev/null
+TEST_PROGS := ipc_unmuxed
+
+CFLAGS += -I../../../../../usr/include
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
--- /dev/null
+#ifdef __NR_semop
+DO_TEST(semop, __NR_semop)
+#endif
+
+#ifdef __NR_semget
+DO_TEST(semget, __NR_semget)
+#endif
+
+#ifdef __NR_semctl
+DO_TEST(semctl, __NR_semctl)
+#endif
+
+#ifdef __NR_semtimedop
+DO_TEST(semtimedop, __NR_semtimedop)
+#endif
+
+#ifdef __NR_msgsnd
+DO_TEST(msgsnd, __NR_msgsnd)
+#endif
+
+#ifdef __NR_msgrcv
+DO_TEST(msgrcv, __NR_msgrcv)
+#endif
+
+#ifdef __NR_msgget
+DO_TEST(msgget, __NR_msgget)
+#endif
+
+#ifdef __NR_msgctl
+DO_TEST(msgctl, __NR_msgctl)
+#endif
+
+#ifdef __NR_shmat
+DO_TEST(shmat, __NR_shmat)
+#endif
+
+#ifdef __NR_shmdt
+DO_TEST(shmdt, __NR_shmdt)
+#endif
+
+#ifdef __NR_shmget
+DO_TEST(shmget, __NR_shmget)
+#endif
+
+#ifdef __NR_shmctl
+DO_TEST(shmctl, __NR_shmctl)
+#endif
--- /dev/null
+/*
+ * Copyright 2015, Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This test simply tests that certain syscalls are implemented. It doesn't
+ * actually exercise their logic in any way.
+ */
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+
+#include "utils.h"
+
+
+#define DO_TEST(_name, _num) \
+static int test_##_name(void) \
+{ \
+ int rc; \
+ printf("Testing " #_name); \
+ errno = 0; \
+ rc = syscall(_num, -1, 0, 0, 0, 0, 0); \
+ printf("\treturned %d, errno %d\n", rc, errno); \
+ return errno == ENOSYS; \
+}
+
+#include "ipc.h"
+#undef DO_TEST
+
+static int ipc_unmuxed(void)
+{
+ int tests_done = 0;
+
+#define DO_TEST(_name, _num) \
+ FAIL_IF(test_##_name()); \
+ tests_done++;
+
+#include "ipc.h"
+#undef DO_TEST
+
+ /*
+ * If we ran no tests then it means none of the syscall numbers were
+ * defined, possibly because we were built against old headers. But it
+ * means we didn't really test anything, so instead of passing mark it
+ * as a skip to give the user a clue.
+ */
+ SKIP_IF(tests_done == 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(ipc_unmuxed, "ipc_unmuxed");
+}
exit(-1);
}
+static inline bool have_htm_nosc(void)
+{
+#ifdef PPC_FEATURE2_HTM_NOSC
+ return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_HTM_NOSC);
+#else
+ printf("PPC_FEATURE2_HTM_NOSC not defined, can't check AT_HWCAP2\n");
+ return false;
+#endif
+}
+
int tm_syscall(void)
{
unsigned count = 0;
struct timeval end, now;
- SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2)
- & PPC_FEATURE2_HTM_NOSC));
+ SKIP_IF(!have_htm_nosc());
+
setbuf(stdout, NULL);
printf("Testing transactional syscalls for %d seconds...\n", TEST_DURATION);
}
clearhandler(SIGSEGV);
+ /* Make sure nothing explodes if we fork. */
+ if (fork() > 0)
+ return 0;
+
return (nerrs == 0 ? 0 : 1);
}
void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+ bool phys_active;
+ int ret;
/*
* We're about to run this vcpu again, so there is no need to
*/
if (kvm_timer_should_fire(vcpu))
kvm_timer_inject_irq(vcpu);
+
+ /*
+ * We keep track of whether the edge-triggered interrupt has been
+ * signalled to the vgic/guest, and if so, we mask the interrupt and
+ * the physical distributor to prevent the timer from raising a
+ * physical interrupt whenever we run a guest, preventing forward
+ * VCPU progress.
+ */
+ if (kvm_vgic_get_phys_irq_active(timer->map))
+ phys_active = true;
+ else
+ phys_active = false;
+
+ ret = irq_set_irqchip_state(timer->map->irq,
+ IRQCHIP_STATE_ACTIVE,
+ phys_active);
+ WARN_ON(ret);
}
/**
return false;
}
+/*
+ * If a mapped interrupt's state has been modified by the guest such that it
+ * is no longer active or pending, without it have gone through the sync path,
+ * then the map->active field must be cleared so the interrupt can be taken
+ * again.
+ */
+static void vgic_handle_clear_mapped_irq(struct kvm_vcpu *vcpu)
+{
+ struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+ struct list_head *root;
+ struct irq_phys_map_entry *entry;
+ struct irq_phys_map *map;
+
+ rcu_read_lock();
+
+ /* Check for PPIs */
+ root = &vgic_cpu->irq_phys_map_list;
+ list_for_each_entry_rcu(entry, root, entry) {
+ map = &entry->map;
+
+ if (!vgic_dist_irq_is_pending(vcpu, map->virt_irq) &&
+ !vgic_irq_is_active(vcpu, map->virt_irq))
+ map->active = false;
+ }
+
+ rcu_read_unlock();
+}
+
bool vgic_handle_clear_pending_reg(struct kvm *kvm,
struct kvm_exit_mmio *mmio,
phys_addr_t offset, int vcpu_id)
vcpu_id, offset);
vgic_reg_access(mmio, reg, offset, mode);
+ vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
vgic_update_state(kvm);
return true;
}
ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
if (mmio->is_write) {
+ vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
vgic_update_state(kvm);
return true;
}
pend_percpu = vcpu->arch.vgic_cpu.pending_percpu;
pend_shared = vcpu->arch.vgic_cpu.pending_shared;
+ if (!dist->enabled) {
+ bitmap_zero(pend_percpu, VGIC_NR_PRIVATE_IRQS);
+ bitmap_zero(pend_shared, nr_shared);
+ return 0;
+ }
+
pending = vgic_bitmap_get_cpu_map(&dist->irq_pending, vcpu_id);
enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id);
bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS);
struct kvm_vcpu *vcpu;
int c;
- if (!dist->enabled) {
- set_bit(0, dist->irq_pending_on_cpu);
- return;
- }
-
kvm_for_each_vcpu(c, vcpu, kvm) {
if (compute_pending_for_cpu(vcpu))
set_bit(c, dist->irq_pending_on_cpu);
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
struct vgic_lr vlr = vgic_get_lr(vcpu, lr_nr);
+ /*
+ * We must transfer the pending state back to the distributor before
+ * retiring the LR, otherwise we may loose edge-triggered interrupts.
+ */
+ if (vlr.state & LR_STATE_PENDING) {
+ vgic_dist_irq_set_pending(vcpu, irq);
+ vlr.hwirq = 0;
+ }
+
vlr.state = 0;
vgic_set_lr(vcpu, lr_nr, vlr);
clear_bit(lr_nr, vgic_cpu->lr_used);
kvm_debug("Set active, clear distributor: 0x%x\n", vlr.state);
vgic_irq_clear_active(vcpu, irq);
vgic_update_state(vcpu->kvm);
- } else if (vgic_dist_irq_is_pending(vcpu, irq)) {
+ } else {
+ WARN_ON(!vgic_dist_irq_is_pending(vcpu, irq));
vlr.state |= LR_STATE_PENDING;
kvm_debug("Set pending: 0x%x\n", vlr.state);
}
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
unsigned long *pa_percpu, *pa_shared;
- int i, vcpu_id, lr, ret;
+ int i, vcpu_id;
int overflow = 0;
int nr_shared = vgic_nr_shared_irqs(dist);
*/
clear_bit(vcpu_id, dist->irq_pending_on_cpu);
}
-
- for (lr = 0; lr < vgic->nr_lr; lr++) {
- struct vgic_lr vlr;
-
- if (!test_bit(lr, vgic_cpu->lr_used))
- continue;
-
- vlr = vgic_get_lr(vcpu, lr);
-
- /*
- * If we have a mapping, and the virtual interrupt is
- * presented to the guest (as pending or active), then we must
- * set the state to active in the physical world. See
- * Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt.
- */
- if (vlr.state & LR_HW) {
- struct irq_phys_map *map;
- map = vgic_irq_map_search(vcpu, vlr.irq);
-
- ret = irq_set_irqchip_state(map->irq,
- IRQCHIP_STATE_ACTIVE,
- true);
- WARN_ON(ret);
- }
- }
}
static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
return 0;
map = vgic_irq_map_search(vcpu, vlr.irq);
- BUG_ON(!map || !map->active);
+ BUG_ON(!map);
ret = irq_get_irqchip_state(map->irq,
IRQCHIP_STATE_ACTIVE,
WARN_ON(ret);
- if (map->active) {
- ret = irq_set_irqchip_state(map->irq,
- IRQCHIP_STATE_ACTIVE,
- false);
- WARN_ON(ret);
+ if (map->active)
return 0;
- }
return 1;
}
} else {
if (level_triggered) {
vgic_dist_irq_clear_level(vcpu, irq_num);
- if (!vgic_dist_irq_soft_pend(vcpu, irq_num))
+ if (!vgic_dist_irq_soft_pend(vcpu, irq_num)) {
vgic_dist_irq_clear_pending(vcpu, irq_num);
+ vgic_cpu_irq_clear(vcpu, irq_num);
+ if (!compute_pending_for_cpu(vcpu))
+ clear_bit(cpuid, dist->irq_pending_on_cpu);
+ }
}
ret = false;
projects / karo-tx-linux.git / commitdiff