ENGR00178582 Remove uart2 early parameter

UART2 and CAN interface do not have pins in common.
Therefore uart2 early parameter is not required.

Signed-off-by: Alejandro Sierra <b18039@freescale.com>

diff --git a/arch/arm/mach-mx6/board-mx6q_sabreauto.c b/arch/arm/mach-mx6/board-mx6q_sabreauto.c
index 56ebaa6af5682532beb823425c9cf3992b5834a2..7ca00f3b475b5c3317b95379f69f907a83ef859c 100644 (file)
--- a/arch/arm/mach-mx6/board-mx6q_sabreauto.c
+++ b/arch/arm/mach-mx6/board-mx6q_sabreauto.c
@@ -135,16 +135,8 @@
 static int mma8451_position = 3;
 static struct clk *sata_clk;
 static int mipi_sensor;
-static int uart2_en;
 static int can0_enable;
 
-static int __init uart2_enable(char *p)
-{
-       uart2_en = 1;
-       return 0;
-}
-early_param("uart2", uart2_enable);
-
 enum sd_pad_mode {
        SD_PAD_MODE_LOW_SPEED,
        SD_PAD_MODE_MED_SPEED,
@@ -1287,15 +1279,14 @@ static void __init mx6_board_init(void)
        BUG_ON(!i2c3_pads);
        mxc_iomux_v3_setup_multiple_pads(i2c3_pads, i2c3_pads_cnt);
 
-       if (!uart2_en) {
-               if (can0_enable) {
-                       BUG_ON(!can0_pads);
-                       mxc_iomux_v3_setup_multiple_pads(can0_pads,
-                                                       can0_pads_cnt);
-               }
-               BUG_ON(!can1_pads);
-               mxc_iomux_v3_setup_multiple_pads(can1_pads, can1_pads_cnt);
+       if (can0_enable) {
+               BUG_ON(!can0_pads);
+               mxc_iomux_v3_setup_multiple_pads(can0_pads,
+                                               can0_pads_cnt);
        }
+       BUG_ON(!can1_pads);
+       mxc_iomux_v3_setup_multiple_pads(can1_pads, can1_pads_cnt);
+
 
        /* assert i2c-rst  */
        gpio_request(SABREAUTO_I2C_EXP_RST, "i2c-rst");