mtd: nand: pxa3xx: Allow to set/clear the 'spare enable' field

Some commands (such as the ONFI parameter page read) need to
clear the 'spare enable' bit. This commit allows to set/clear
depending on the prepared command, instead of having it always
set.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index c41902513ce02301b50f2f777973f2cb1946ab66..c13d9837e184a079433ebefb763ae88af72e8b13 100644 (file)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -185,6 +185,7 @@ struct pxa3xx_nand_info {
        int                     cs;
        int                     use_ecc;        /* use HW ECC ? */
        int                     use_dma;        /* use DMA ? */
+       int                     use_spare;      /* use spare ? */
        int                     is_ready;
 
        unsigned int            page_size;      /* page size of attached chip */
@@ -325,6 +326,11 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
        else
                ndcr &= ~NDCR_DMA_EN;
 
+       if (info->use_spare)
+               ndcr |= NDCR_SPARE_EN;
+       else
+               ndcr &= ~NDCR_SPARE_EN;
+
        ndcr |= NDCR_ND_RUN;
 
        /* clear status bits and run */
@@ -526,6 +532,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
        info->buf_count         = 0;
        info->oob_size          = 0;
        info->use_ecc           = 0;
+       info->use_spare         = 1;
        info->use_dma           = (use_dma) ? 1 : 0;
        info->is_ready          = 0;
        info->retcode           = ERR_NONE;