]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
[media] V4L: ov9740: Remove hardcoded resolution regs
authorAndrew Chew <achew@nvidia.com>
Thu, 23 Jun 2011 23:19:42 +0000 (20:19 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 27 Jul 2011 20:53:27 +0000 (17:53 -0300)
Derive resolution-dependent register settings programmatically.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/ov9740.c

index 72c6ac1d767cdfe592cff5721b3b541043273474..decd70650eac81ff35aa04d9bb259417826c26f6 100644 (file)
 #define OV9740_MIPI_CTRL_3012          0x3012
 #define OV9740_SC_CMMM_MIPI_CTR                0x3014
 
-/* supported resolutions */
-enum {
-       OV9740_VGA,
-       OV9740_720P,
-};
-
-struct ov9740_resolution {
-       unsigned int width;
-       unsigned int height;
-};
-
-static struct ov9740_resolution ov9740_resolutions[] = {
-       [OV9740_VGA] = {
-               .width  = 640,
-               .height = 480,
-       },
-       [OV9740_720P] = {
-               .width  = 1280,
-               .height = 720,
-       },
-};
+#define OV9740_MAX_WIDTH               1280
+#define OV9740_MAX_HEIGHT              720
 
 /* Misc. structures */
 struct ov9740_reg {
@@ -403,54 +384,6 @@ static const struct ov9740_reg ov9740_defaults[] = {
        { OV9740_ISP_CTRL19,            0x02 },
 };
 
-static const struct ov9740_reg ov9740_regs_vga[] = {
-       { OV9740_X_ADDR_START_HI,       0x00 },
-       { OV9740_X_ADDR_START_LO,       0xa0 },
-       { OV9740_Y_ADDR_START_HI,       0x00 },
-       { OV9740_Y_ADDR_START_LO,       0x00 },
-       { OV9740_X_ADDR_END_HI,         0x04 },
-       { OV9740_X_ADDR_END_LO,         0x63 },
-       { OV9740_Y_ADDR_END_HI,         0x02 },
-       { OV9740_Y_ADDR_END_LO,         0xd3 },
-       { OV9740_X_OUTPUT_SIZE_HI,      0x02 },
-       { OV9740_X_OUTPUT_SIZE_LO,      0x80 },
-       { OV9740_Y_OUTPUT_SIZE_HI,      0x01 },
-       { OV9740_Y_OUTPUT_SIZE_LO,      0xe0 },
-       { OV9740_ISP_CTRL1E,            0x03 },
-       { OV9740_ISP_CTRL1F,            0xc0 },
-       { OV9740_ISP_CTRL20,            0x02 },
-       { OV9740_ISP_CTRL21,            0xd0 },
-       { OV9740_VFIFO_READ_START_HI,   0x01 },
-       { OV9740_VFIFO_READ_START_LO,   0x40 },
-       { OV9740_ISP_CTRL00,            0xff },
-       { OV9740_ISP_CTRL01,            0xff },
-       { OV9740_ISP_CTRL03,            0xff },
-};
-
-static const struct ov9740_reg ov9740_regs_720p[] = {
-       { OV9740_X_ADDR_START_HI,       0x00 },
-       { OV9740_X_ADDR_START_LO,       0x00 },
-       { OV9740_Y_ADDR_START_HI,       0x00 },
-       { OV9740_Y_ADDR_START_LO,       0x00 },
-       { OV9740_X_ADDR_END_HI,         0x05 },
-       { OV9740_X_ADDR_END_LO,         0x03 },
-       { OV9740_Y_ADDR_END_HI,         0x02 },
-       { OV9740_Y_ADDR_END_LO,         0xd3 },
-       { OV9740_X_OUTPUT_SIZE_HI,      0x05 },
-       { OV9740_X_OUTPUT_SIZE_LO,      0x00 },
-       { OV9740_Y_OUTPUT_SIZE_HI,      0x02 },
-       { OV9740_Y_OUTPUT_SIZE_LO,      0xd0 },
-       { OV9740_ISP_CTRL1E,            0x05 },
-       { OV9740_ISP_CTRL1F,            0x00 },
-       { OV9740_ISP_CTRL20,            0x02 },
-       { OV9740_ISP_CTRL21,            0xd0 },
-       { OV9740_VFIFO_READ_START_HI,   0x02 },
-       { OV9740_VFIFO_READ_START_LO,   0x30 },
-       { OV9740_ISP_CTRL00,            0xff },
-       { OV9740_ISP_CTRL01,            0xef },
-       { OV9740_ISP_CTRL03,            0xff },
-};
-
 static enum v4l2_mbus_pixelcode ov9740_codes[] = {
        V4L2_MBUS_FMT_YUYV8_2X8,
 };
@@ -727,39 +660,124 @@ static int ov9740_set_register(struct v4l2_subdev *sd,
 /* select nearest higher resolution for capture */
 static void ov9740_res_roundup(u32 *width, u32 *height)
 {
-       int i;
+       /* Width must be a multiple of 4 pixels. */
+       *width = ALIGN(*width, 4);
 
-       for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++)
-               if ((ov9740_resolutions[i].width >= *width) &&
-                   (ov9740_resolutions[i].height >= *height)) {
-                       *width = ov9740_resolutions[i].width;
-                       *height = ov9740_resolutions[i].height;
-                       return;
-               }
+       /* Max resolution is 1280x720 (720p). */
+       if (*width > OV9740_MAX_WIDTH)
+               *width = OV9740_MAX_WIDTH;
 
-       *width = ov9740_resolutions[OV9740_720P].width;
-       *height = ov9740_resolutions[OV9740_720P].height;
+       if (*height > OV9740_MAX_HEIGHT)
+               *height = OV9740_MAX_HEIGHT;
 }
 
 /* Setup registers according to resolution and color encoding */
-static int ov9740_set_res(struct i2c_client *client, u32 width)
+static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
 {
+       u32 x_start;
+       u32 y_start;
+       u32 x_end;
+       u32 y_end;
+       bool scaling = 0;
+       u32 scale_input_x;
+       u32 scale_input_y;
        int ret;
 
-       /* select register configuration for given resolution */
-       if (width == ov9740_resolutions[OV9740_VGA].width) {
-               dev_dbg(&client->dev, "Setting image size to 640x480\n");
-               ret = ov9740_reg_write_array(client, ov9740_regs_vga,
-                                            ARRAY_SIZE(ov9740_regs_vga));
-       } else if (width == ov9740_resolutions[OV9740_720P].width) {
-               dev_dbg(&client->dev, "Setting image size to 1280x720\n");
-               ret = ov9740_reg_write_array(client, ov9740_regs_720p,
-                                            ARRAY_SIZE(ov9740_regs_720p));
+       if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
+               scaling = 1;
+
+       /*
+        * Try to use as much of the sensor area as possible when supporting
+        * smaller resolutions.  Depending on the aspect ratio of the
+        * chosen resolution, we can either use the full width of the sensor,
+        * or the full height of the sensor (or both if the aspect ratio is
+        * the same as 1280x720.
+        */
+       if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
+               scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
+               scale_input_y = OV9740_MAX_HEIGHT;
        } else {
-               dev_err(&client->dev, "Failed to select resolution!\n");
-               return -EINVAL;
+               scale_input_x = OV9740_MAX_WIDTH;
+               scale_input_y = (OV9740_MAX_WIDTH * height) / width;
        }
 
+       /* These describe the area of the sensor to use. */
+       x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
+       y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
+       x_end = x_start + scale_input_x - 1;
+       y_end = y_start + scale_input_y - 1;
+
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
+                              (scale_input_x - width) >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
+                              (scale_input_x - width) & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
+                                                         (scaling << 4));
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
+
+done:
        return ret;
 }
 
@@ -787,7 +805,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
        if (ret < 0)
                return ret;
 
-       ret = ov9740_set_res(client, mf->width);
+       ret = ov9740_set_res(client, mf->width, mf->height);
        if (ret < 0)
                return ret;
 
@@ -824,8 +842,8 @@ static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
        a->bounds.left          = 0;
        a->bounds.top           = 0;
-       a->bounds.width         = ov9740_resolutions[OV9740_720P].width;
-       a->bounds.height        = ov9740_resolutions[OV9740_720P].height;
+       a->bounds.width         = OV9740_MAX_WIDTH;
+       a->bounds.height        = OV9740_MAX_HEIGHT;
        a->defrect              = a->bounds;
        a->type                 = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        a->pixelaspect.numerator        = 1;
@@ -838,8 +856,8 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
        a->c.left               = 0;
        a->c.top                = 0;
-       a->c.width              = ov9740_resolutions[OV9740_720P].width;
-       a->c.height             = ov9740_resolutions[OV9740_720P].height;
+       a->c.width              = OV9740_MAX_WIDTH;
+       a->c.height             = OV9740_MAX_HEIGHT;
        a->type                 = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
        return 0;