Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty

diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c60d996fde89cef341f5dc05163160..a22ecf48f255c24220eec21cb1769e29c5db11c7 100644 (file)
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+       http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
        Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input            Temperature (RO)
-temp1_min              Minimum temperature (RW)
-temp1_max              Maximum temperature (RW)
-temp1_crit             Critical high temperature (RW)
+temp1_min              Minimum temperature (RO or RW)
+temp1_max              Maximum temperature (RO or RW)
+temp1_crit             Critical high temperature (RO or RW)
 
-temp1_crit_hyst                Critical hysteresis temperature (RW)
+temp1_crit_hyst                Critical hysteresis temperature (RO or RW)
 temp1_max_hyst         Maximum hysteresis temperature (RO)
 
 temp1_min_alarm                Temperature low alarm

diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a67b9e0966c614dfb626cd2877ef7d..d2b56a4fd1f5a44566968e7b5faebe62b879ccaa 100644 (file)
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c751e6a6b2248a2bf0377c0b8bcaf4b7af6e..6f99e1260db835105b4c8624898e9b8a054acf70 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@ S:  Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:     David Brown <davidb@codeaurora.org>
-M:     Daniel Walker <dwalker@codeaurora.org>
+M:     Daniel Walker <dwalker@fifo99.com>
 M:     Bryan Huntsman <bryanh@codeaurora.org>
 L:     linux-arm-msm@vger.kernel.org
 F:     arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M:        Guenter Roeck <guenter.roeck@ericsson.com>
 L:     lm-sensors@lm-sensors.org
 W:     http://www.lm-sensors.org/
 T:     quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:     quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:     Maintained
 F:     Documentation/hwmon/

diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1e919e8dfbf4d7deab9e29ddce9acd8274..2751b3a8a66f447b238a5df4681569f22f0e39d4 100644 (file)
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
        unsigned long output_addr;
        unsigned char *output;
 
-       check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+       output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+       check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
        memset(&_bss, 0, &_ebss - &_bss);
        free_mem_ptr = (unsigned long)&_end;
        free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-       output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+       output = (unsigned char *) output_addr;
 
 #ifdef CONFIG_BLK_DEV_INITRD
        /*

diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea117181e9df886da524ebfb4147f54ff84a..5c5ba10384c2ee824065f5ae2ee8ac92a7cf3ab6 100644 (file)
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
 
 static inline int atomic_read(const atomic_t *v)
 {
-       barrier();
-       return v->counter;
+       int c;
+
+       asm volatile(
+               "       l       %0,%1\n"
+               : "=d" (c) : "Q" (v->counter));
+       return c;
 }
 
 static inline void atomic_set(atomic_t *v, int i)
 {
-       v->counter = i;
-       barrier();
+       asm volatile(
+               "       st      %1,%0\n"
+               : "=Q" (v->counter) : "d" (i));
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 static inline long long atomic64_read(const atomic64_t *v)
 {
-       barrier();
-       return v->counter;
+       long long c;
+
+       asm volatile(
+               "       lg      %0,%1\n"
+               : "=d" (c) : "Q" (v->counter));
+       return c;
 }
 
 static inline void atomic64_set(atomic64_t *v, long long i)
 {
-       v->counter = i;
-       barrier();
+       asm volatile(
+               "       stg     %1,%0\n"
+               : "=Q" (v->counter) : "d" (i));
 }
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)

diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa68b64367a8ff1e68c91981d15c2ee51afd..2a30d5ac0667aa6285eef8c3bb95a86ad04db809 100644 (file)
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
 
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
+#define NET_SKB_PAD       32
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 

diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c659262aeea3d419142b78d32deac721a9..36e0fa161c2bf0b46206a6e0af00698935ad158b 100644 (file)
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -577,11 +577,9 @@ duration:
        if (rc)
                return;
 
-       if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
-           be32_to_cpu(tpm_cmd.header.out.length)
-           != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+       if (be32_to_cpu(tpm_cmd.header.out.return_code)
+           != 3 * sizeof(u32))
                return;
-
        duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
        chip->vendor.duration[TPM_SHORT] =
            usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
 
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
-                         char *buf)
-{
-       struct tpm_chip *chip = dev_get_drvdata(dev);
-
-       return sprintf(buf, "%d %d %d\n",
-                      jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
-                      jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
-                      jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
 {

diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff772c26f7ccde9fbdcb2720f8c20e025d1ed..72ddb031b69a24e425a22d5892283b91f6cc1eec 100644 (file)
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
                                char *);
 extern ssize_t tpm_show_temp_deactivated(struct device *,
                                         struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
-                                struct device_attribute *attr, char *);
 
 struct tpm_chip;
 

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e5f266137dc9c426abab641a769f054ddd..dd21df55689d96a39d5fea3f66d2161dfec44467 100644 (file)
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
                   NULL);
 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
 
 static struct attribute *tis_attrs[] = {
        &dev_attr_pubek.attr,
@@ -386,8 +385,7 @@ static struct attribute *tis_attrs[] = {
        &dev_attr_owned.attr,
        &dev_attr_temp_deactivated.attr,
        &dev_attr_caps.attr,
-       &dev_attr_cancel.attr,
-       &dev_attr_timeouts.attr, NULL,
+       &dev_attr_cancel.attr, NULL,
 };
 
 static struct attribute_group tis_attr_grp = {

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f16466482ed6a499005b27485c6854400..297bc9a7d6e6c52bb400efd25ca11945050bf7f0 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
          will be called k8temp.
 
 config SENSORS_K10TEMP
-       tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+       tristate "AMD Family 10h/11h/12h/14h temperature sensor"
        depends on X86 && PCI
        help
          If you say yes here you get support for the temperature
          sensor(s) inside your CPU. Supported are later revisions of
-         the AMD Family 10h and all revisions of the AMD Family 11h
-         microarchitectures.
+         the AMD Family 10h and all revisions of the AMD Family 11h,
+         12h (Llano), and 14h (Brazos) microarchitectures.
 
          This driver can also be built as a module.  If so, the module
          will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
          called jz4740-hwmon.
 
 config SENSORS_JC42
-       tristate "JEDEC JC42.4 compliant temperature sensors"
+       tristate "JEDEC JC42.4 compliant memory module temperature sensors"
        depends on I2C
        help
-         If you say yes here you get support for Jedec JC42.4 compliant
-         temperature sensors. Support will include, but not be limited to,
-         ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-         MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+         If you say yes here, you get support for JEDEC JC42.4 compliant
+         temperature sensors, which are used on many DDR3 memory modules for
+         mobile devices and servers.  Support will include, but not be limited
+         to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+         MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
          This driver can also be built as a module.  If so, the module
          will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
        help
          If you say yes here you get support for National Semiconductor LM85
          sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-         EMC6D101 and EMC6D102.
+         EMC6D101, EMC6D102, and EMC6D103.
 
          This driver can also be built as a module.  If so, the module
          will be called lm85.

diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8ddedd9e73b697fde9479ec285e8bbcf..93499123706182b9bdf42b3da295759eda67b18c 100644 (file)
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
 
 /* Configuration register defines */
 #define JC42_CFG_CRIT_ONLY     (1 << 2)
+#define JC42_CFG_TCRIT_LOCK    (1 << 6)
+#define JC42_CFG_EVENT_LOCK    (1 << 7)
 #define JC42_CFG_SHUTDOWN      (1 << 8)
 #define JC42_CFG_HYST_SHIFT    9
 #define JC42_CFG_HYST_MASK     0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct jc42_data *data = i2c_get_clientdata(client);
-       long val;
+       unsigned long val;
        int diff, hyst;
        int err;
        int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
 
 static DEVICE_ATTR(temp1_input, S_IRUGO,
                   show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
                   show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
                   show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
                   show_temp_max, set_temp_max);
 
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
                   show_temp_crit_hyst, set_temp_crit_hyst);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
                   show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
        NULL
 };
 
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+                                 struct attribute *attr, int index)
+{
+       struct device *dev = container_of(kobj, struct device, kobj);
+       struct i2c_client *client = to_i2c_client(dev);
+       struct jc42_data *data = i2c_get_clientdata(client);
+       unsigned int config = data->config;
+       bool readonly;
+
+       if (attr == &dev_attr_temp1_crit.attr)
+               readonly = config & JC42_CFG_TCRIT_LOCK;
+       else if (attr == &dev_attr_temp1_min.attr ||
+                attr == &dev_attr_temp1_max.attr)
+               readonly = config & JC42_CFG_EVENT_LOCK;
+       else if (attr == &dev_attr_temp1_crit_hyst.attr)
+               readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+       else
+               readonly = true;
+
+       return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
 static const struct attribute_group jc42_group = {
        .attrs = jc42_attributes,
+       .is_visible = jc42_attribute_mode,
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3eafe88584924ad82b7683e398502a..82bf65aa2968bcfb3d89b6c9280e72f437762037 100644 (file)
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
 /*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <asm/processor.h>
 
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL");
 
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
 static const struct pci_device_id k10temp_id_table[] = {
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+       { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
        {}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37ac66da8aabdf246104400c047f7bc..d2cc28660816623fc03f79445d825d7e95c5134a 100644 (file)
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 enum chips {
        any_chip, lm85b, lm85c,
        adm1027, adt7463, adt7468,
-       emc6d100, emc6d102
+       emc6d100, emc6d102, emc6d103
 };
 
 /* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
 #define        LM85_VERSTEP_EMC6D100_A0        0x60
 #define        LM85_VERSTEP_EMC6D100_A1        0x61
 #define        LM85_VERSTEP_EMC6D102           0x65
+#define        LM85_VERSTEP_EMC6D103_A0        0x68
+#define        LM85_VERSTEP_EMC6D103_A1        0x69
+#define        LM85_VERSTEP_EMC6D103S          0x6A    /* Also known as EMC6D103:A2 */
 
 #define        LM85_REG_CONFIG                 0x40
 
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
        { "emc6d100", emc6d100 },
        { "emc6d101", emc6d100 },
        { "emc6d102", emc6d102 },
+       { "emc6d103", emc6d103 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
                case LM85_VERSTEP_EMC6D102:
                        type_name = "emc6d102";
                        break;
+               case LM85_VERSTEP_EMC6D103_A0:
+               case LM85_VERSTEP_EMC6D103_A1:
+                       type_name = "emc6d103";
+                       break;
+               /*
+                * Registers apparently missing in EMC6D103S/EMC6D103:A2
+                * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+                * (according to the data sheets), but used unconditionally
+                * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+                * So skip EMC6D103S for now.
+               case LM85_VERSTEP_EMC6D103S:
+                       type_name = "emc6d103s";
+                       break;
+                */
                }
        } else {
                dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
        case adt7468:
        case emc6d100:
        case emc6d102:
+       case emc6d103:
                data->freq_map = adm1027_freq_map;
                break;
        default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                        /* More alarm bits */
                        data->alarms |= lm85_read_value(client,
                                                EMC6D100_REG_ALARM3) << 16;
-               } else if (data->type == emc6d102) {
+               } else if (data->type == emc6d102 || data->type == emc6d103) {
                        /* Have to read LSB bits after the MSB ones because
                           the reading of the MSB bits has frozen the
                           LSBs (backward from the ADM1027).

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d05563391fb93849d327c729564b24174b..a9fe23d5bd0f73417ab4f51013ec2654bce7d185 100644 (file)
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@ static struct dasd_discipline dasd_eckd_discipline;
 static struct ccw_device_id dasd_eckd_ids[] = {
        { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
        { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
-       { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+       { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
        { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
        { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
        { CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},

diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f356e0f0375a784de99c05b832c2bc66ad4..16c0bdfbb16481148acfeb4845cbfcc020e5b6ab 100644 (file)
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@ static void vortex_adbdma_resetup(vortex_t *vortex, int adbdma) {
 static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
 {
        stream_t *dma = &vortex->dma_adb[adbdma];
-       int temp;
+       int temp, page, delta;
 
        temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-       temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
-       return temp;
+       page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+       if (dma->nr_periods >= 4)
+               delta = (page - dma->period_real) & 3;
+       else {
+               delta = (page - dma->period_real);
+               if (delta < 0)
+                       delta += dma->nr_periods;
+       }
+       return (dma->period_virt + delta) * dma->period_bytes
+               + (temp & (dma->period_bytes - 1));
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcdee8f9d01f3bce78b79573e81ff785a335..fcedad9a5feffab614d084f92a3f3588d89a3382 100644 (file)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
        SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
        SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
        SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+       SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
        SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
        SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
        SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d32140dede38047797f04b1e4c4796cdbe7..dd7c5c12225d29123d4bf13cb5247e962a864c66 100644 (file)
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3410,7 +3410,7 @@ static void cx_auto_parse_output(struct hda_codec *codec)
                }
        }
        spec->multiout.dac_nids = spec->private_dac_nids;
-       spec->multiout.max_channels = nums * 2;
+       spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
        if (cfg->hp_outs > 0)
                spec->auto_mute = 1;
@@ -3729,9 +3729,9 @@ static int cx_auto_init(struct hda_codec *codec)
        return 0;
 }
 
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
                              const char *dir, int cidx,
-                             hda_nid_t nid, int hda_dir)
+                             hda_nid_t nid, int hda_dir, int amp_idx)
 {
        static char name[32];
        static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3743,8 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
 
        for (i = 0; i < 2; i++) {
                struct snd_kcontrol *kctl;
-               knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+               knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+                                                           hda_dir);
                knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
                knew[i].index = cidx;
                snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3760,9 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
        return 0;
 }
 
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir)                \
+       cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
 #define cx_auto_add_pb_volume(codec, nid, str, idx)                    \
        cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
 
@@ -3808,29 +3812,60 @@ static int cx_auto_build_input_controls(struct hda_codec *codec)
        struct conexant_spec *spec = codec->spec;
        struct auto_pin_cfg *cfg = &spec->autocfg;
        static const char *prev_label;
-       int i, err, cidx;
+       int i, err, cidx, conn_len;
+       hda_nid_t conn[HDA_MAX_CONNECTIONS];
+
+       int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+       int adc_nid = spec->adc_nids[0];
+
+       conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+                                          HDA_MAX_CONNECTIONS);
+       if (conn_len < 0)
+               return conn_len;
+
+       multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+       if (!multi_adc_volume) {
+               err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+                                        HDA_INPUT);
+               if (err < 0)
+                       return err;
+       }
 
-       err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
-                                HDA_INPUT);
-       if (err < 0)
-               return err;
        prev_label = NULL;
        cidx = 0;
        for (i = 0; i < cfg->num_inputs; i++) {
                hda_nid_t nid = cfg->inputs[i].pin;
                const char *label;
-               if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+               int j;
+               int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+               if (!pin_amp && !multi_adc_volume)
                        continue;
+
                label = hda_get_autocfg_input_label(codec, cfg, i);
                if (label == prev_label)
                        cidx++;
                else
                        cidx = 0;
                prev_label = label;
-               err = cx_auto_add_volume(codec, label, " Capture", cidx,
-                                        nid, HDA_INPUT);
-               if (err < 0)
-                       return err;
+
+               if (pin_amp) {
+                       err = cx_auto_add_volume(codec, label, " Boost", cidx,
+                                                nid, HDA_INPUT);
+                       if (err < 0)
+                               return err;
+               }
+
+               if (!multi_adc_volume)
+                       continue;
+               for (j = 0; j < conn_len; j++) {
+                       if (conn[j] == nid) {
+                               err = cx_auto_add_volume_idx(codec, label,
+                                   " Capture", cidx, adc_nid, HDA_INPUT, j);
+                               if (err < 0)
+                                       return err;
+                               break;
+                       }
+               }
        }
        return 0;
 }

diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b97477577b923f8017733d0a6656cbbfa486d3..66eabafb1c24554f8c46b7d946d4e3c6cf8fc3bf 100644 (file)
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
        }
 
        dev->pcm->private_data = dev;
-       strcpy(dev->pcm->name, dev->product_name);
+       strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
 
        memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
        memset(dev->sub_capture, 0, sizeof(dev->sub_capture));

diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c77fff2dd2249811a9d99141468e885dbce..a1a47088fd0c72ae7827469ee46ae9a8d29d6cba 100644 (file)
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
        if (ret < 0)
                return ret;
 
-       strcpy(rmidi->name, device->product_name);
+       strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
 
        rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
        rmidi->private_data = device;