ARM: debug: move davinci debug to generic 8250 code

Davinci's debugging is just a copy of the old 8250_32 code with a
different base address.  Incorporate this into the generic 8250
debug code.

Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index cd2f88e226093d00c3178bd27f490b14c3c447d3..0498a3a311f03de7cdf1bb8d477d0accef0c6f44 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -119,6 +119,7 @@ choice
        config DEBUG_DAVINCI_DA8XX_UART1
                bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
                depends on ARCH_DAVINCI_DA8XX
+               select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART1 serial port on DaVinci DA8XX devices.
@@ -126,6 +127,7 @@ choice
        config DEBUG_DAVINCI_DA8XX_UART2
                bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
                depends on ARCH_DAVINCI_DA8XX
+               select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART2 serial port on DaVinci DA8XX devices.
@@ -133,6 +135,7 @@ choice
        config DEBUG_DAVINCI_DMx_UART0
                bool "Kernel low-level debugging on DaVinci DMx using UART0"
                depends on ARCH_DAVINCI_DMx
+               select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART0 serial port on DaVinci DMx devices.
@@ -140,6 +143,7 @@ choice
        config DEBUG_DAVINCI_TNETV107X_UART1
                bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
                depends on ARCH_DAVINCI_TNETV107X
+               select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART1 serial port on DaVinci TNETV107X
@@ -901,11 +905,15 @@ config DEBUG_UART_8250
 
 config DEBUG_UART_PHYS
        hex "Physical base address of debug UART"
+       default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
        default 0x01c28000 if DEBUG_SUNXI_UART0
        default 0x01c28400 if DEBUG_SUNXI_UART1
+       default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
+       default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
        default 0x02530c00 if DEBUG_KEYSTONE_UART0
        default 0x02531000 if DEBUG_KEYSTONE_UART1
        default 0x03010fe0 if ARCH_RPC
+       default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
        default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
                                DEBUG_VEXPRESS_UART0_CA9
        default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -982,9 +990,13 @@ config DEBUG_UART_VIRT
        default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
        default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
        default 0xfec02000 if DEBUG_SOCFPGA_UART
+       default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
+       default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
+       default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
        default 0xfed12000 if ARCH_KIRKWOOD
        default 0xfedc0000 if ARCH_EP93XX
        default 0xfee003f8 if FOOTBRIDGE
+       default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
        default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
        default 0xfee36000 if DEBUG_HIGHBANK_UART
        default 0xfee82340 if ARCH_IOP13XX
@@ -1007,7 +1019,9 @@ config DEBUG_UART_8250_WORD
        depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
        depends on DEBUG_UART_8250_SHIFT >= 2
        default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
-               ARCH_KEYSTONE
+               ARCH_KEYSTONE || \
+               DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
+               DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
 
 config DEBUG_UART_8250_FLOW_CONTROL
        bool "Enable flow control for 8250 UART"

diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
deleted file mode 100644 (file)
index b18b8eb..0000000
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Debugging macro for DaVinci
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* Modifications
- * Jan 2009    Chaithrika U S  Added senduart, busyuart, waituart
- *                             macros, based on debug-8250.S file
- *                             but using 32-bit accesses required for
- *                              some davinci devices.
- */
-
-#include <linux/serial_reg.h>
-
-#include <mach/serial.h>
-
-#define UART_SHIFT     2
-
-#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
-#define UART_BASE      DAVINCI_UART0_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
-#define UART_BASE      DA8XX_UART1_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
-#define UART_BASE      DA8XX_UART2_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
-#define UART_BASE      TNETV107X_UART2_BASE
-#define UART_VIRTBASE  TNETV107X_UART2_VIRT
-#else
-#error "Select a specifc port for DEBUG_LL"
-#endif
-
-#ifndef UART_VIRTBASE
-#define UART_VIRTBASE  IO_ADDRESS(UART_BASE)
-#endif
-
-               .macro addruart, rp, rv, tmp
-               ldr     \rp, =UART_BASE
-               ldr     \rv, =UART_VIRTBASE
-               .endm
-
-               .macro  senduart,rd,rx
-               str     \rd, [\rx, #UART_TX << UART_SHIFT]
-               .endm
-
-               .macro  busyuart,rd,rx
-1002:          ldr     \rd, [\rx, #UART_LSR << UART_SHIFT]
-               and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-               teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
-               bne     1002b
-               .endm
-
-               .macro  waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:          ldr     \rd, [\rx, #UART_MSR << UART_SHIFT]
-               tst     \rd, #UART_MSR_CTS
-               beq     1001b
-#endif
-               .endm
-