--- /dev/null
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+#define BMP085_I2C_ADDRESS 0x77
+
+static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
+ I2C_CLIENT_END };
+
+static int bmp085_i2c_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ if (client->addr != BMP085_I2C_ADDRESS)
+ return -ENODEV;
+
+ return bmp085_detect(&client->dev);
+}
+
+static int __devinit bmp085_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+ struct regmap *regmap = devm_regmap_init_i2c(client,
+ &bmp085_regmap_config);
+
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+ return err;
+ }
+
+ return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_i2c_remove(struct i2c_client *client)
+{
+ return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct i2c_device_id bmp085_id[] = {
+ { BMP085_NAME, 0 },
+ { "bmp180", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bmp085_id);
+
+static struct i2c_driver bmp085_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP085_NAME,
+ .of_match_table = bmp085_of_match
+ },
+ .id_table = bmp085_id,
+ .probe = bmp085_i2c_probe,
+ .remove = __devexit_p(bmp085_i2c_remove),
+
+ .detect = bmp085_i2c_detect,
+ .address_list = normal_i2c
+};
+
+module_i2c_driver(bmp085_i2c_driver);
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 I2C bus driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+static int __devinit bmp085_spi_probe(struct spi_device *client)
+{
+ int err;
+ struct regmap *regmap;
+
+ client->bits_per_word = 8;
+ err = spi_setup(client);
+ if (err < 0) {
+ dev_err(&client->dev, "spi_setup failed!\n");
+ return err;
+ }
+
+ regmap = devm_regmap_init_spi(client, &bmp085_regmap_config);
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+ return err;
+ }
+
+ return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_spi_remove(struct spi_device *client)
+{
+ return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct spi_device_id bmp085_id[] = {
+ { "bmp180", 0 },
+ { "bmp181", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmp085_id);
+
+static struct spi_driver bmp085_spi_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP085_NAME,
+ .of_match_table = bmp085_of_match
+ },
+ .id_table = bmp085_id,
+ .probe = bmp085_spi_probe,
+ .remove = __devexit_p(bmp085_spi_remove)
+};
+
+static int __init bmp085_spi_init(void)
+{
+ return spi_register_driver(&bmp085_spi_driver);
+}
+
+static void __exit bmp085_spi_exit(void)
+{
+ spi_unregister_driver(&bmp085_spi_driver);
+}
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 SPI bus driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp085_spi_init);
+module_exit(bmp085_spi_exit);
* Copyright (c) 2012 Bosch Sensortec GmbH
* Copyright (c) 2012 Unixphere AB
*
- * This driver supports the bmp085 digital barometric pressure
- * and temperature sensor from Bosch Sensortec. The datasheet
- * is available from their website:
+ * This driver supports the bmp085 and bmp18x digital barometric pressure
+ * and temperature sensors from Bosch Sensortec. The datasheets
+ * are available from their website:
* http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
*
* A pressure measurement is issued by reading from pressure0_input.
* The return value ranges from 30000 to 110000 pascal with a resulution
#include <linux/module.h>
#include <linux/device.h>
#include <linux/init.h>
-#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include "bmp085.h"
-#define BMP085_NAME "bmp085"
-#define BMP085_I2C_ADDRESS 0x77
#define BMP085_CHIP_ID 0x55
-
#define BMP085_CALIBRATION_DATA_START 0xAA
#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
#define BMP085_CHIP_ID_REG 0xD0
#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
#define BMP085_TEMP_CONVERSION_TIME 5
-static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
- I2C_CLIENT_END };
-
struct bmp085_calibration_data {
s16 AC1, AC2, AC3;
u16 AC4, AC5, AC6;
};
struct bmp085_data {
- struct i2c_client *client;
+ struct device *dev;
+ struct regmap *regmap;
struct mutex lock;
struct bmp085_calibration_data calibration;
u8 oversampling_setting;
s32 b6; /* calculated temperature correction coefficient */
};
-static s32 bmp085_read_calibration_data(struct i2c_client *client)
+static s32 bmp085_read_calibration_data(struct bmp085_data *data)
{
u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
- struct bmp085_data *data = i2c_get_clientdata(client);
struct bmp085_calibration_data *cali = &(data->calibration);
- s32 status = i2c_smbus_read_i2c_block_data(client,
- BMP085_CALIBRATION_DATA_START,
- (BMP085_CALIBRATION_DATA_LENGTH << 1),
- (u8 *)tmp);
+ s32 status = regmap_bulk_read(data->regmap,
+ BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
+ (BMP085_CALIBRATION_DATA_LENGTH << 1));
if (status < 0)
return status;
- if (status != (BMP085_CALIBRATION_DATA_LENGTH << 1))
- return -EIO;
-
cali->AC1 = be16_to_cpu(tmp[0]);
cali->AC2 = be16_to_cpu(tmp[1]);
cali->AC3 = be16_to_cpu(tmp[2]);
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
- BMP085_TEMP_MEASUREMENT);
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
+ BMP085_TEMP_MEASUREMENT);
if (status < 0) {
- dev_err(&data->client->dev,
+ dev_err(data->dev,
"Error while requesting temperature measurement.\n");
goto exit;
}
msleep(BMP085_TEMP_CONVERSION_TIME);
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
- if (status < 0)
- goto exit;
- if (status != sizeof(tmp)) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ &tmp, sizeof(tmp));
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading temperature measurement result\n");
- status = -EIO;
goto exit;
}
data->raw_temperature = be16_to_cpu(tmp);
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_PRESSURE_MEASUREMENT +
(data->oversampling_setting << 6));
if (status < 0) {
- dev_err(&data->client->dev,
+ dev_err(data->dev,
"Error while requesting pressure measurement.\n");
goto exit;
}
msleep(2+(3 << data->oversampling_setting));
/* copy data into a u32 (4 bytes), but skip the first byte. */
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
- if (status < 0)
- goto exit;
- if (status != 3) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ ((u8 *)&tmp)+1, 3);
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading pressure measurement results\n");
- status = -EIO;
goto exit;
}
data->raw_pressure = be32_to_cpu((tmp));
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
unsigned long oversampling;
int err = kstrtoul(buf, 10, &oversampling);
static ssize_t show_oversampling(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
}
{
int temperature;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_temperature(data, &temperature);
if (status < 0)
{
int pressure;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_pressure(data, &pressure);
if (status < 0)
.attrs = bmp085_attributes,
};
-static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+int bmp085_detect(struct device *dev)
{
- if (client->addr != BMP085_I2C_ADDRESS)
- return -ENODEV;
+ struct bmp085_data *data = dev_get_drvdata(dev);
+ unsigned int id;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
+ if (ret < 0)
+ return ret;
- if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+ if (id != data->chip_id)
return -ENODEV;
return 0;
}
+EXPORT_SYMBOL_GPL(bmp085_detect);
-static void __init bmp085_get_of_properties(struct i2c_client *client,
- struct bmp085_data *data)
+static void __init bmp085_get_of_properties(struct bmp085_data *data)
{
#ifdef CONFIG_OF
- struct device_node *np = client->dev.of_node;
+ struct device_node *np = data->dev->of_node;
u32 prop;
if (!np)
#endif
}
-static int bmp085_init_client(struct i2c_client *client)
+static int bmp085_init_client(struct bmp085_data *data)
{
- struct bmp085_data *data = i2c_get_clientdata(client);
- int status = bmp085_read_calibration_data(client);
+ int status = bmp085_read_calibration_data(data);
if (status < 0)
return status;
/* default settings */
- data->client = client;
data->chip_id = BMP085_CHIP_ID;
data->last_temp_measurement = 0;
data->temp_measurement_period = 1*HZ;
data->oversampling_setting = 3;
- bmp085_get_of_properties(client, data);
+ bmp085_get_of_properties(data);
mutex_init(&data->lock);
return 0;
}
-static int __devinit bmp085_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+struct regmap_config bmp085_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8
+};
+EXPORT_SYMBOL_GPL(bmp085_regmap_config);
+
+__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
{
struct bmp085_data *data;
int err = 0;
goto exit;
}
- i2c_set_clientdata(client, data);
+ dev_set_drvdata(dev, data);
+ data->dev = dev;
+ data->regmap = regmap;
/* Initialize the BMP085 chip */
- err = bmp085_init_client(client);
+ err = bmp085_init_client(data);
if (err < 0)
goto exit_free;
+ err = bmp085_detect(dev);
+ if (err < 0) {
+ dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
+ goto exit_free;
+ }
+
/* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+ err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
if (err)
goto exit_free;
- dev_info(&client->dev, "Successfully initialized %s!\n", BMP085_NAME);
+ dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
return 0;
exit:
return err;
}
+EXPORT_SYMBOL_GPL(bmp085_probe);
-static int __devexit bmp085_remove(struct i2c_client *client)
+int bmp085_remove(struct device *dev)
{
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
- sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
+ sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
kfree(data);
return 0;
}
-
-static const struct of_device_id bmp085_of_match[] = {
- { .compatible = "bosch,bmp085", },
- { },
-};
-MODULE_DEVICE_TABLE(of, bmp085_of_match);
-
-static const struct i2c_device_id bmp085_id[] = {
- { BMP085_NAME, 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, bmp085_id);
-
-static struct i2c_driver bmp085_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = BMP085_NAME,
- .of_match_table = bmp085_of_match
- },
- .id_table = bmp085_id,
- .probe = bmp085_probe,
- .remove = __devexit_p(bmp085_remove),
-
- .detect = bmp085_detect,
- .address_list = normal_i2c
-};
-
-module_i2c_driver(bmp085_driver);
+EXPORT_SYMBOL_GPL(bmp085_remove);
MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
MODULE_DESCRIPTION("BMP085 driver");
projects / linux-beck.git / commitdiff