ARM: S3C64XX: Hook up GPIO initiated DVS on Cragganmore

Allow us to ramp VDDARM quickly by using a GPIO to signal a voltage change
instead of doing a register write.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe1ea378da587c2dc920d8a113342252fec..5affb26a1985b1e66f027b1a688edfe6b2dbd1ad 100644 (file)
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -353,6 +353,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
        .irq_base       = 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+       .dvs_control_src = 1,
+       .dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
        REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -368,6 +374,7 @@ static struct regulator_init_data vddarm __initdata = {
        .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
        .consumer_supplies = vddarm_consumers,
        .supply_regulator = "WALLVDD",
+       .driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -503,6 +510,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
        .backup = &banff_backup_pdata,
 
        .gpio_defaults = {
+               /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+               [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
                /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
                [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
                /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/