]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ARM: 7398/1: l2x0: only write to debug registers on PL310
authorWill Deacon <will.deacon@arm.com>
Fri, 20 Apr 2012 16:22:11 +0000 (17:22 +0100)
committerBen Hutchings <ben@decadent.org.uk>
Fri, 11 May 2012 12:14:45 +0000 (13:14 +0100)
commit ab4d536890853ab6675ede65db40e2c0980cb0ea upstream.

PL310 errata #588369 and #727915 require writes to the debug registers
of the cache controller to work around known problems. Writing these
registers on L220 may cause deadlock, so ensure that we only perform
this operation when we identify a PL310 at probe time.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
arch/arm/mm/cache-l2x0.c

index 971d52749afdc693f5b9b62f459b3aa7307ad212..db7bcc078006b9cbb2761b6cc915f06a37fbb84f 100644 (file)
@@ -81,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+       if (outer_cache.set_debug)
+               outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)      outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
        writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -94,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug NULL
+#define pl310_set_debug        NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +334,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
                /* Unmapped register. */
                sync_reg_offset = L2X0_DUMMY_REG;
 #endif
+               outer_cache.set_debug = pl310_set_debug;
                break;
        case L2X0_CACHE_ID_PART_L210:
                ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
        outer_cache.flush_all = l2x0_flush_all;
        outer_cache.inv_all = l2x0_inv_all;
        outer_cache.disable = l2x0_disable;
-       outer_cache.set_debug = l2x0_set_debug;
 
        printk(KERN_INFO "%s cache controller enabled\n", type);
        printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",