#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
+#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/leds.h>
#define ETH_KS8851_IRQ 34
#define ETH_KS8851_POWER_ON 48
#define ETH_KS8851_QUART 138
+#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
+#define OMAP4_SFH7741_ENABLE_GPIO 188
static struct gpio_led sdp4430_gpio_leds[] = {
{
};
+static struct gpio_keys_button sdp4430_gpio_keys[] = {
+ {
+ .desc = "Proximity Sensor",
+ .type = EV_SW,
+ .code = SW_FRONT_PROXIMITY,
+ .gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
+ .active_low = 0,
+ }
+};
+
static struct gpio_led_platform_data sdp4430_led_data = {
.leds = sdp4430_gpio_leds,
.num_leds = ARRAY_SIZE(sdp4430_gpio_leds),
};
+static int omap_prox_activate(struct device *dev)
+{
+ gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
+ return 0;
+}
+
+static void omap_prox_deactivate(struct device *dev)
+{
+ gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
+}
+
+static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
+ .buttons = sdp4430_gpio_keys,
+ .nbuttons = ARRAY_SIZE(sdp4430_gpio_keys),
+ .enable = omap_prox_activate,
+ .disable = omap_prox_deactivate,
+};
+
+static struct platform_device sdp4430_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp4430_gpio_keys_data,
+ },
+};
+
static struct platform_device sdp4430_leds_gpio = {
.name = "leds-gpio",
.id = -1,
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
+ &sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
};
I2C_BOARD_INFO("tmp105", 0x48),
},
};
+static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("hmc5843", 0x1e),
+ },
+};
static int __init omap4_i2c_init(void)
{
/*
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
- omap_register_i2c_bus(4, 400, NULL, 0);
+ omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
+ ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
return 0;
}
+
+static void __init omap_sfh7741prox_init(void)
+{
+ int error;
+
+ error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741");
+ if (error < 0) {
+ pr_err("%s:failed to request GPIO %d, error %d\n",
+ __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
+ return;
+ }
+
+ error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0);
+ if (error < 0) {
+ pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n",
+ __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
+ gpio_free(OMAP4_SFH7741_ENABLE_GPIO);
+ }
+}
+
static void __init omap_4430sdp_init(void)
{
int status;
omap4_i2c_init();
+ omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
#define NAND_BLOCK_SIZE SZ_128K
+/*
+ * OMAP3 Beagle revision
+ * Run time detection of Beagle revision is done by reading GPIO.
+ * GPIO ID -
+ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
+ * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
+ * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
+ * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ */
+enum {
+ OMAP3BEAGLE_BOARD_UNKN = 0,
+ OMAP3BEAGLE_BOARD_AXBX,
+ OMAP3BEAGLE_BOARD_C1_3,
+ OMAP3BEAGLE_BOARD_C4,
+ OMAP3BEAGLE_BOARD_XM,
+};
+
+static u8 omap3_beagle_version;
+
+static u8 omap3_beagle_get_rev(void)
+{
+ return omap3_beagle_version;
+}
+
+static void __init omap3_beagle_init_rev(void)
+{
+ int ret;
+ u16 beagle_rev = 0;
+
+ omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
+
+ ret = gpio_request(171, "rev_id_0");
+ if (ret < 0)
+ goto fail0;
+
+ ret = gpio_request(172, "rev_id_1");
+ if (ret < 0)
+ goto fail1;
+
+ ret = gpio_request(173, "rev_id_2");
+ if (ret < 0)
+ goto fail2;
+
+ gpio_direction_input(171);
+ gpio_direction_input(172);
+ gpio_direction_input(173);
+
+ beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
+ | (gpio_get_value(173) << 2);
+
+ switch (beagle_rev) {
+ case 7:
+ printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+ break;
+ case 6:
+ printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+ break;
+ case 5:
+ printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ break;
+ case 0:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ break;
+ default:
+ printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+ }
+
+ return;
+
+fail2:
+ gpio_free(172);
+fail1:
+ gpio_free(171);
+fail0:
+ printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+
+ return;
+}
+
static struct mtd_partition omap3beagle_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
{
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ mmc[0].gpio_wp = -EINVAL;
+ } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
+ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
},
};
+static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
+ {
+ I2C_BOARD_INFO("eeprom", 0x50),
+ },
+};
+
static int __init omap3_beagle_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
ARRAY_SIZE(beagle_i2c_boardinfo));
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 100, NULL, 0);
+ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
return 0;
}
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap3_beagle_init_rev();
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include "hsmmc.h"
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "pandaboard::status1",
+ .default_trigger = "heartbeat",
+ .gpio = 7,
+ },
+ {
+ .name = "pandaboard::status2",
+ .default_trigger = "mmc0",
+ .gpio = 8,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct platform_device *panda_devices[] __initdata = {
+ &leds_gpio,
+};
+
static void __init omap4_panda_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
static void __init omap4_panda_init(void)
{
omap4_panda_i2c_init();
+ platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 Panda uses internal transceiver so register nop transceiver */
projects / mv-sheeva.git / commitdiff