#include "ipath_kernel.h"
#include "ipath_common.h"
+/*
+ * mmap64 doesn't allow all 64 bits for 32-bit applications
+ * so only use the low 43 bits.
+ */
+#define MMAP64_MASK 0x7FFFFFFFFFFUL
+
static int ipath_open(struct inode *, struct file *);
static int ipath_close(struct inode *, struct file *);
static ssize_t ipath_write(struct file *, const char __user *, size_t,
.mmap = ipath_mmap
};
-static int ipath_get_base_info(struct ipath_portdata *pd,
+static int ipath_get_base_info(struct file *fp,
void __user *ubase, size_t ubase_size)
{
+ struct ipath_portdata *pd = port_fp(fp);
int ret = 0;
struct ipath_base_info *kinfo = NULL;
struct ipath_devdata *dd = pd->port_dd;
+ unsigned subport_cnt;
+ int shared, master;
+ size_t sz;
+
+ subport_cnt = pd->port_subport_cnt;
+ if (!subport_cnt) {
+ shared = 0;
+ master = 0;
+ subport_cnt = 1;
+ } else {
+ shared = 1;
+ master = !subport_fp(fp);
+ }
- if (ubase_size < sizeof(*kinfo)) {
+ sz = sizeof(*kinfo);
+ /* If port sharing is not requested, allow the old size structure */
+ if (!shared)
+ sz -= 3 * sizeof(u64);
+ if (ubase_size < sz) {
ipath_cdbg(PROC,
- "Base size %lu, need %lu (version mismatch?)\n",
- (unsigned long) ubase_size,
- (unsigned long) sizeof(*kinfo));
+ "Base size %zu, need %zu (version mismatch?)\n",
+ ubase_size, sz);
ret = -EINVAL;
goto bail;
}
kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
pd->port_rcvegrbuf_chunks;
- kinfo->spi_tidcnt = dd->ipath_rcvtidcnt;
+ kinfo->spi_tidcnt = dd->ipath_rcvtidcnt / subport_cnt;
+ if (master)
+ kinfo->spi_tidcnt += dd->ipath_rcvtidcnt % subport_cnt;
/*
* for this use, may be ipath_cfgports summed over all chips that
* are are configured and present
* page_address() macro worked, but in 2.6.11, even that returns the
* full 64 bit address (upper bits all 1's). So far, using the
* physical addresses (or chip offsets, for chip mapping) works, but
- * no doubt some future kernel release will chang that, and we'll be
- * on to yet another method of dealing with this
+ * no doubt some future kernel release will change that, and we'll be
+ * on to yet another method of dealing with this.
*/
kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
- kinfo->spi_rcvhdr_tailaddr = (u64)pd->port_rcvhdrqtailaddr_phys;
+ kinfo->spi_rcvhdr_tailaddr = (u64) pd->port_rcvhdrqtailaddr_phys;
kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
(void *) dd->ipath_statusp -
(void *) dd->ipath_pioavailregs_dma;
- kinfo->spi_piobufbase = (u64) pd->port_piobufs;
- kinfo->__spi_uregbase =
- dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
+ if (!shared) {
+ kinfo->spi_piocnt = dd->ipath_pbufsport;
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs;
+ kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
+ dd->ipath_palign * pd->port_port;
+ } else if (master) {
+ kinfo->spi_piocnt = (dd->ipath_pbufsport / subport_cnt) +
+ (dd->ipath_pbufsport % subport_cnt);
+ /* Master's PIO buffers are after all the slave's */
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs +
+ dd->ipath_palign *
+ (dd->ipath_pbufsport - kinfo->spi_piocnt);
+ kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
+ dd->ipath_palign * pd->port_port;
+ } else {
+ unsigned slave = subport_fp(fp) - 1;
- kinfo->spi_pioindex = dd->ipath_pbufsport * (pd->port_port - 1);
- kinfo->spi_piocnt = dd->ipath_pbufsport;
+ kinfo->spi_piocnt = dd->ipath_pbufsport / subport_cnt;
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs +
+ dd->ipath_palign * kinfo->spi_piocnt * slave;
+ kinfo->__spi_uregbase = ((u64) pd->subport_uregbase +
+ PAGE_SIZE * slave) & MMAP64_MASK;
+
+ kinfo->spi_rcvhdr_base = ((u64) pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * slave) & MMAP64_MASK;
+ kinfo->spi_rcvhdr_tailaddr =
+ (u64) pd->port_rcvhdrqtailaddr_phys & MMAP64_MASK;
+ kinfo->spi_rcv_egrbufs = ((u64) pd->subport_rcvegrbuf +
+ dd->ipath_rcvegrcnt * dd->ipath_rcvegrbufsize * slave) &
+ MMAP64_MASK;
+ }
+
+ kinfo->spi_pioindex = (kinfo->spi_piobufbase - dd->ipath_piobufbase) /
+ dd->ipath_palign;
kinfo->spi_pioalign = dd->ipath_palign;
kinfo->spi_qpair = IPATH_KD_QP;
kinfo->spi_piosize = dd->ipath_ibmaxlen;
kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
kinfo->spi_port = pd->port_port;
+ kinfo->spi_subport = subport_fp(fp);
kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
kinfo->spi_hw_version = dd->ipath_revision;
+ if (master) {
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_MASTER;
+ kinfo->spi_subport_uregbase =
+ (u64) pd->subport_uregbase & MMAP64_MASK;
+ kinfo->spi_subport_rcvegrbuf =
+ (u64) pd->subport_rcvegrbuf & MMAP64_MASK;
+ kinfo->spi_subport_rcvhdr_base =
+ (u64) pd->subport_rcvhdr_base & MMAP64_MASK;
+ ipath_cdbg(PROC, "port %u flags %x %llx %llx %llx\n",
+ kinfo->spi_port,
+ kinfo->spi_runtime_flags,
+ kinfo->spi_subport_uregbase,
+ kinfo->spi_subport_rcvegrbuf,
+ kinfo->spi_subport_rcvhdr_base);
+ }
+
if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
ret = -EFAULT;
/**
* ipath_tid_update - update a port TID
* @pd: the port
+ * @fp: the ipath device file
* @ti: the TID information
*
* The new implementation as of Oct 2004 is that the driver assigns
* virtually contiguous pages, that should change to improve
* performance.
*/
-static int ipath_tid_update(struct ipath_portdata *pd,
+static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
const struct ipath_tid_info *ti)
{
int ret = 0, ntids;
- u32 tid, porttid, cnt, i, tidcnt;
+ u32 tid, porttid, cnt, i, tidcnt, tidoff;
u16 *tidlist;
struct ipath_devdata *dd = pd->port_dd;
u64 physaddr;
u64 __iomem *tidbase;
unsigned long tidmap[8];
struct page **pagep = NULL;
+ unsigned subport = subport_fp(fp);
if (!dd->ipath_pageshadow) {
ret = -ENOMEM;
ret = -EFAULT;
goto done;
}
- tidcnt = dd->ipath_rcvtidcnt;
- if (cnt >= tidcnt) {
+ porttid = pd->port_port * dd->ipath_rcvtidcnt;
+ if (!pd->port_subport_cnt) {
+ tidcnt = dd->ipath_rcvtidcnt;
+ tid = pd->port_tidcursor;
+ tidoff = 0;
+ } else if (!subport) {
+ tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
+ (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
+ tidoff = dd->ipath_rcvtidcnt - tidcnt;
+ porttid += tidoff;
+ tid = tidcursor_fp(fp);
+ } else {
+ tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
+ tidoff = tidcnt * (subport - 1);
+ porttid += tidoff;
+ tid = tidcursor_fp(fp);
+ }
+ if (cnt > tidcnt) {
/* make sure it all fits in port_tid_pg_list */
dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
"TIDs, only trying max (%u)\n", cnt, tidcnt);
cnt = tidcnt;
}
- pagep = (struct page **)pd->port_tid_pg_list;
- tidlist = (u16 *) (&pagep[cnt]);
+ pagep = &((struct page **) pd->port_tid_pg_list)[tidoff];
+ tidlist = &((u16 *) &pagep[dd->ipath_rcvtidcnt])[tidoff];
memset(tidmap, 0, sizeof(tidmap));
- tid = pd->port_tidcursor;
/* before decrement; chip actual # */
- porttid = pd->port_port * tidcnt;
ntids = tidcnt;
tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
dd->ipath_rcvtidbase +
ret = -ENOMEM;
break;
}
- tidlist[i] = tid;
+ tidlist[i] = tid + tidoff;
ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
- "vaddr %lx\n", i, tid, vaddr);
+ "vaddr %lx\n", i, tid + tidoff, vaddr);
/* we "know" system pages and TID pages are same size */
dd->ipath_pageshadow[porttid + tid] = pagep[i];
/*
}
if (tid == tidcnt)
tid = 0;
- pd->port_tidcursor = tid;
+ if (!pd->port_subport_cnt)
+ pd->port_tidcursor = tid;
+ else
+ tidcursor_fp(fp) = tid;
}
done:
/**
* ipath_tid_free - free a port TID
* @pd: the port
+ * @subport: the subport
* @ti: the TID info
*
* right now we are unlocking one page at a time, but since
* they pass in to us.
*/
-static int ipath_tid_free(struct ipath_portdata *pd,
+static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
const struct ipath_tid_info *ti)
{
int ret = 0;
}
porttid = pd->port_port * dd->ipath_rcvtidcnt;
+ if (!pd->port_subport_cnt)
+ tidcnt = dd->ipath_rcvtidcnt;
+ else if (!subport) {
+ tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
+ (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
+ porttid += dd->ipath_rcvtidcnt - tidcnt;
+ } else {
+ tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
+ porttid += tidcnt * (subport - 1);
+ }
tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
dd->ipath_rcvtidbase +
porttid * sizeof(*tidbase));
- tidcnt = dd->ipath_rcvtidcnt;
limit = sizeof(tidmap) * BITS_PER_BYTE;
if (limit > tidcnt)
/* just in case size changes in future */
/**
* ipath_manage_rcvq - manage a port's receive queue
* @pd: the port
+ * @subport: the subport
* @start_stop: action to carry out
*
* start_stop == 0 disables receive on the port, for use in queue
* overflow conditions. start_stop==1 re-enables, to be used to
* re-init the software copy of the head register
*/
-static int ipath_manage_rcvq(struct ipath_portdata *pd, int start_stop)
+static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
+ int start_stop)
{
struct ipath_devdata *dd = pd->port_dd;
u64 tval;
- ipath_cdbg(PROC, "%sabling rcv for unit %u port %u\n",
+ ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
start_stop ? "en" : "dis", dd->ipath_unit,
- pd->port_port);
+ pd->port_port, subport);
+ if (subport)
+ goto bail;
/* atomically clear receive enable port. */
if (start_stop) {
/*
tval = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
}
/* always; new head should be equal to new tail; see above */
+bail:
return 0;
}
}
}
+/*
+ * Initialize the port data with the receive buffer sizes
+ * so this can be done while the master port is locked.
+ * Otherwise, there is a race with a slave opening the port
+ * and seeing these fields uninitialized.
+ */
+static void init_user_egr_sizes(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned egrperchunk, egrcnt, size;
+
+ /*
+ * to avoid wasting a lot of memory, we allocate 32KB chunks of
+ * physically contiguous memory, advance through it until used up
+ * and then allocate more. Of course, we need memory to store those
+ * extra pointers, now. Started out with 256KB, but under heavy
+ * memory pressure (creating large files and then copying them over
+ * NFS while doing lots of MPI jobs), we hit some allocation
+ * failures, even though we can sleep... (2.6.10) Still get
+ * failures at 64K. 32K is the lowest we can go without wasting
+ * additional memory.
+ */
+ size = 0x8000;
+ egrperchunk = size / dd->ipath_rcvegrbufsize;
+ egrcnt = dd->ipath_rcvegrcnt;
+ pd->port_rcvegrbuf_chunks = (egrcnt + egrperchunk - 1) / egrperchunk;
+ pd->port_rcvegrbufs_perchunk = egrperchunk;
+ pd->port_rcvegrbuf_size = size;
+}
+
/**
* ipath_create_user_egr - allocate eager TID buffers
* @pd: the port to allocate TID buffers for
static int ipath_create_user_egr(struct ipath_portdata *pd)
{
struct ipath_devdata *dd = pd->port_dd;
- unsigned e, egrcnt, alloced, egrperchunk, chunk, egrsize, egroff;
+ unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
size_t size;
int ret;
gfp_t gfp_flags;
ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
"offset %x, egrsize %u\n", egrcnt, egroff, egrsize);
- /*
- * to avoid wasting a lot of memory, we allocate 32KB chunks of
- * physically contiguous memory, advance through it until used up
- * and then allocate more. Of course, we need memory to store those
- * extra pointers, now. Started out with 256KB, but under heavy
- * memory pressure (creating large files and then copying them over
- * NFS while doing lots of MPI jobs), we hit some allocation
- * failures, even though we can sleep... (2.6.10) Still get
- * failures at 64K. 32K is the lowest we can go without wasting
- * additional memory.
- */
- size = 0x8000;
- alloced = ALIGN(egrsize * egrcnt, size);
- egrperchunk = size / egrsize;
- chunk = (egrcnt + egrperchunk - 1) / egrperchunk;
- pd->port_rcvegrbuf_chunks = chunk;
- pd->port_rcvegrbufs_perchunk = egrperchunk;
- pd->port_rcvegrbuf_size = size;
- pd->port_rcvegrbuf = vmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]));
+ chunk = pd->port_rcvegrbuf_chunks;
+ egrperchunk = pd->port_rcvegrbufs_perchunk;
+ size = pd->port_rcvegrbuf_size;
+ pd->port_rcvegrbuf = kmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]),
+ GFP_KERNEL);
if (!pd->port_rcvegrbuf) {
ret = -ENOMEM;
goto bail;
}
pd->port_rcvegrbuf_phys =
- vmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]));
+ kmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]),
+ GFP_KERNEL);
if (!pd->port_rcvegrbuf_phys) {
ret = -ENOMEM;
goto bail_rcvegrbuf;
pd->port_rcvegrbuf_phys[e]);
}
- vfree(pd->port_rcvegrbuf_phys);
+ kfree(pd->port_rcvegrbuf_phys);
pd->port_rcvegrbuf_phys = NULL;
bail_rcvegrbuf:
- vfree(pd->port_rcvegrbuf);
+ kfree(pd->port_rcvegrbuf);
pd->port_rcvegrbuf = NULL;
bail:
return ret;
}
-static int ipath_do_user_init(struct ipath_portdata *pd,
- const struct ipath_user_info *uinfo)
-{
- int ret = 0;
- struct ipath_devdata *dd = pd->port_dd;
- u32 head32;
-
- /* for now, if major version is different, bail */
- if ((uinfo->spu_userversion >> 16) != IPATH_USER_SWMAJOR) {
- dev_info(&dd->pcidev->dev,
- "User major version %d not same as driver "
- "major %d\n", uinfo->spu_userversion >> 16,
- IPATH_USER_SWMAJOR);
- ret = -ENODEV;
- goto done;
- }
-
- if ((uinfo->spu_userversion & 0xffff) != IPATH_USER_SWMINOR)
- ipath_dbg("User minor version %d not same as driver "
- "minor %d\n", uinfo->spu_userversion & 0xffff,
- IPATH_USER_SWMINOR);
-
- if (uinfo->spu_rcvhdrsize) {
- ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
- if (ret)
- goto done;
- }
-
- /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
-
- /* for right now, kernel piobufs are at end, so port 1 is at 0 */
- pd->port_piobufs = dd->ipath_piobufbase +
- dd->ipath_pbufsport * (pd->port_port -
- 1) * dd->ipath_palign;
- ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n",
- pd->port_port, pd->port_piobufs);
-
- /*
- * Now allocate the rcvhdr Q and eager TIDs; skip the TID
- * array for time being. If pd->port_port > chip-supported,
- * we need to do extra stuff here to handle by handling overflow
- * through port 0, someday
- */
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = ipath_create_user_egr(pd);
- if (ret)
- goto done;
-
- /*
- * set the eager head register for this port to the current values
- * of the tail pointers, since we don't know if they were
- * updated on last use of the port.
- */
- head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
- ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
- dd->ipath_lastegrheads[pd->port_port] = -1;
- dd->ipath_lastrcvhdrqtails[pd->port_port] = -1;
- ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
- pd->port_port, head32);
- pd->port_tidcursor = 0; /* start at beginning after open */
- /*
- * now enable the port; the tail registers will be written to memory
- * by the chip as soon as it sees the write to
- * dd->ipath_kregs->kr_rcvctrl. The update only happens on
- * transition from 0 to 1, so clear it first, then set it as part of
- * enabling the port. This will (very briefly) affect any other
- * open ports, but it shouldn't be long enough to be an issue.
- * We explictly set the in-memory copy to 0 beforehand, so we don't
- * have to wait to be sure the DMA update has happened.
- */
- *pd->port_rcvhdrtail_kvaddr = 0ULL;
- set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
- &dd->ipath_rcvctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-done:
- return ret;
-}
-
/* common code for the mappings on dma_alloc_coherent mem */
static int ipath_mmap_mem(struct vm_area_struct *vma,
static int mmap_piobufs(struct vm_area_struct *vma,
struct ipath_devdata *dd,
- struct ipath_portdata *pd)
+ struct ipath_portdata *pd,
+ unsigned piobufs, unsigned piocnt)
{
unsigned long phys;
int ret;
* process data, and catches users who might try to read the i/o
* space due to a bug.
*/
- if ((vma->vm_end - vma->vm_start) >
- (dd->ipath_pbufsport * dd->ipath_palign)) {
+ if ((vma->vm_end - vma->vm_start) > (piocnt * dd->ipath_palign)) {
dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
"reqlen %lx > PAGE\n",
vma->vm_end - vma->vm_start);
- ret = -EFAULT;
+ ret = -EINVAL;
goto bail;
}
- phys = dd->ipath_physaddr + pd->port_piobufs;
+ phys = dd->ipath_physaddr + piobufs;
/*
* Don't mark this as non-cached, or we don't get the
"reqlen %lx > actual %lx\n",
vma->vm_end - vma->vm_start,
(unsigned long) total_size);
- ret = -EFAULT;
+ ret = -EINVAL;
goto bail;
}
return ret;
}
+/*
+ * ipath_file_vma_nopage - handle a VMA page fault.
+ */
+static struct page *ipath_file_vma_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ unsigned long offset = address - vma->vm_start;
+ struct page *page = NOPAGE_SIGBUS;
+ void *pageptr;
+
+ /*
+ * Convert the vmalloc address into a struct page.
+ */
+ pageptr = (void *)(offset + (vma->vm_pgoff << PAGE_SHIFT));
+ page = vmalloc_to_page(pageptr);
+ if (!page)
+ goto out;
+
+ /* Increment the reference count. */
+ get_page(page);
+ if (type)
+ *type = VM_FAULT_MINOR;
+out:
+ return page;
+}
+
+static struct vm_operations_struct ipath_file_vm_ops = {
+ .nopage = ipath_file_vma_nopage,
+};
+
+static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr,
+ struct ipath_portdata *pd, unsigned subport)
+{
+ unsigned long len;
+ struct ipath_devdata *dd;
+ void *addr;
+ size_t size;
+ int ret;
+
+ /* If the port is not shared, all addresses should be physical */
+ if (!pd->port_subport_cnt) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ dd = pd->port_dd;
+ size = pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
+
+ /*
+ * Master has all the slave uregbase, rcvhdrq, and
+ * rcvegrbufs mmapped.
+ */
+ if (subport == 0) {
+ unsigned num_slaves = pd->port_subport_cnt - 1;
+
+ if (pgaddr == ((u64) pd->subport_uregbase & MMAP64_MASK)) {
+ addr = pd->subport_uregbase;
+ size = PAGE_SIZE * num_slaves;
+ } else if (pgaddr == ((u64) pd->subport_rcvhdr_base &
+ MMAP64_MASK)) {
+ addr = pd->subport_rcvhdr_base;
+ size = pd->port_rcvhdrq_size * num_slaves;
+ } else if (pgaddr == ((u64) pd->subport_rcvegrbuf &
+ MMAP64_MASK)) {
+ addr = pd->subport_rcvegrbuf;
+ size *= num_slaves;
+ } else {
+ ret = -EINVAL;
+ goto bail;
+ }
+ } else if (pgaddr == (((u64) pd->subport_uregbase +
+ PAGE_SIZE * (subport - 1)) & MMAP64_MASK)) {
+ addr = pd->subport_uregbase + PAGE_SIZE * (subport - 1);
+ size = PAGE_SIZE;
+ } else if (pgaddr == (((u64) pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * (subport - 1)) &
+ MMAP64_MASK)) {
+ addr = pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * (subport - 1);
+ size = pd->port_rcvhdrq_size;
+ } else if (pgaddr == (((u64) pd->subport_rcvegrbuf +
+ size * (subport - 1)) & MMAP64_MASK)) {
+ addr = pd->subport_rcvegrbuf + size * (subport - 1);
+ /* rcvegrbufs are read-only on the slave */
+ if (vma->vm_flags & VM_WRITE) {
+ dev_info(&dd->pcidev->dev,
+ "Can't map eager buffers as "
+ "writable (flags=%lx)\n", vma->vm_flags);
+ ret = -EPERM;
+ goto bail;
+ }
+ /*
+ * Don't allow permission to later change to writeable
+ * with mprotect.
+ */
+ vma->vm_flags &= ~VM_MAYWRITE;
+ } else {
+ ret = -EINVAL;
+ goto bail;
+ }
+ len = vma->vm_end - vma->vm_start;
+ if (len > size) {
+ ipath_cdbg(MM, "FAIL: reqlen %lx > %zx\n", len, size);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT;
+ vma->vm_ops = &ipath_file_vm_ops;
+ vma->vm_flags |= VM_RESERVED | VM_DONTEXPAND;
+ ret = 0;
+
+bail:
+ return ret;
+}
+
/**
* ipath_mmap - mmap various structures into user space
* @fp: the file pointer
struct ipath_portdata *pd;
struct ipath_devdata *dd;
u64 pgaddr, ureg;
+ unsigned piobufs, piocnt;
int ret;
pd = port_fp(fp);
+ if (!pd) {
+ ret = -EINVAL;
+ goto bail;
+ }
dd = pd->port_dd;
/*
* This is the ipath_do_user_init() code, mapping the shared buffers
* into the user process. The address referred to by vm_pgoff is the
- * virtual, not physical, address; we only do one mmap for each
- * space mapped.
+ * file offset passed via mmap(). For shared ports, this is the
+ * kernel vmalloc() address of the pages to share with the master.
+ * For non-shared or master ports, this is a physical address.
+ * We only do one mmap for each space mapped.
*/
pgaddr = vma->vm_pgoff << PAGE_SHIFT;
/*
- * Must fit in 40 bits for our hardware; some checked elsewhere,
- * but we'll be paranoid. Check for 0 is mostly in case one of the
- * allocations failed, but user called mmap anyway. We want to catch
- * that before it can match.
+ * Check for 0 in case one of the allocations failed, but user
+ * called mmap anyway.
*/
- if (!pgaddr || pgaddr >= (1ULL<<40)) {
- ipath_dev_err(dd, "Bad phys addr %llx, start %lx, end %lx\n",
- (unsigned long long)pgaddr, vma->vm_start, vma->vm_end);
- return -EINVAL;
+ if (!pgaddr) {
+ ret = -EINVAL;
+ goto bail;
}
- /* just the offset of the port user registers, not physical addr */
- ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
-
- ipath_cdbg(MM, "ushare: pgaddr %llx vm_start=%lx, vmlen %lx\n",
+ ipath_cdbg(MM, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
(unsigned long long) pgaddr, vma->vm_start,
- vma->vm_end - vma->vm_start);
+ vma->vm_end - vma->vm_start, dd->ipath_unit,
+ pd->port_port, subport_fp(fp));
- if (vma->vm_start & (PAGE_SIZE-1)) {
- ipath_dev_err(dd,
- "vm_start not aligned: %lx, end=%lx phys %lx\n",
- vma->vm_start, vma->vm_end, (unsigned long)pgaddr);
- ret = -EINVAL;
+ /*
+ * Physical addresses must fit in 40 bits for our hardware.
+ * Check for kernel virtual addresses first, anything else must
+ * match a HW or memory address.
+ */
+ if (pgaddr >= (1ULL<<40)) {
+ ret = mmap_kvaddr(vma, pgaddr, pd, subport_fp(fp));
+ goto bail;
+ }
+
+ if (!pd->port_subport_cnt) {
+ /* port is not shared */
+ ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
+ piocnt = dd->ipath_pbufsport;
+ piobufs = pd->port_piobufs;
+ } else if (!subport_fp(fp)) {
+ /* caller is the master */
+ ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
+ piocnt = (dd->ipath_pbufsport / pd->port_subport_cnt) +
+ (dd->ipath_pbufsport % pd->port_subport_cnt);
+ piobufs = pd->port_piobufs +
+ dd->ipath_palign * (dd->ipath_pbufsport - piocnt);
+ } else {
+ unsigned slave = subport_fp(fp) - 1;
+
+ /* caller is a slave */
+ ureg = 0;
+ piocnt = dd->ipath_pbufsport / pd->port_subport_cnt;
+ piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
}
- else if (pgaddr == ureg)
+
+ if (pgaddr == ureg)
ret = mmap_ureg(vma, dd, ureg);
- else if (pgaddr == pd->port_piobufs)
- ret = mmap_piobufs(vma, dd, pd);
- else if (pgaddr == (u64) pd->port_rcvegr_phys)
+ else if (pgaddr == piobufs)
+ ret = mmap_piobufs(vma, dd, pd, piobufs, piocnt);
+ else if (pgaddr == dd->ipath_pioavailregs_phys)
+ /* in-memory copy of pioavail registers */
+ ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
+ dd->ipath_pioavailregs_phys,
+ "pioavail registers");
+ else if (subport_fp(fp))
+ /* Subports don't mmap the physical receive buffers */
+ ret = -EINVAL;
+ else if (pgaddr == pd->port_rcvegr_phys)
ret = mmap_rcvegrbufs(vma, pd);
- else if (pgaddr == (u64) pd->port_rcvhdrq_phys) {
+ else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
/*
* The rcvhdrq itself; readonly except on HT (so have
* to allow writable mapping), multiple pages, contiguous
* from an i/o perspective.
*/
- unsigned total_size =
- ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize
- * sizeof(u32), PAGE_SIZE);
- ret = ipath_mmap_mem(vma, pd, total_size, 1,
+ ret = ipath_mmap_mem(vma, pd, pd->port_rcvhdrq_size, 1,
pd->port_rcvhdrq_phys,
"rcvhdrq");
- }
- else if (pgaddr == (u64)pd->port_rcvhdrqtailaddr_phys)
+ else if (pgaddr == (u64) pd->port_rcvhdrqtailaddr_phys)
/* in-memory copy of rcvhdrq tail register */
ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
pd->port_rcvhdrqtailaddr_phys,
"rcvhdrq tail");
- else if (pgaddr == dd->ipath_pioavailregs_phys)
- /* in-memory copy of pioavail registers */
- ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
- dd->ipath_pioavailregs_phys,
- "pioavail registers");
else
ret = -EINVAL;
if (ret < 0)
dev_info(&dd->pcidev->dev,
- "Failure %d on addr %lx, off %lx\n",
- -ret, vma->vm_start, vma->vm_pgoff);
-
+ "Failure %d on off %llx len %lx\n",
+ -ret, (unsigned long long)pgaddr,
+ vma->vm_end - vma->vm_start);
+bail:
return ret;
}
struct ipath_devdata *dd;
pd = port_fp(fp);
+ if (!pd)
+ goto bail;
dd = pd->port_dd;
bit = pd->port_port + INFINIPATH_R_INTRAVAIL_SHIFT;
if (tail == head) {
set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
- if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+ if (dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
(void)ipath_write_ureg(dd, ur_rcvhdrhead,
dd->ipath_rhdrhead_intr_off
| head, pd->port_port);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
+bail:
return pollflag;
}
+static int init_subports(struct ipath_devdata *dd,
+ struct ipath_portdata *pd,
+ const struct ipath_user_info *uinfo)
+{
+ int ret = 0;
+ unsigned num_slaves;
+ size_t size;
+
+ /* Old user binaries don't know about subports */
+ if ((uinfo->spu_userversion & 0xffff) != IPATH_USER_SWMINOR)
+ goto bail;
+ /*
+ * If the user is requesting zero or one port,
+ * skip the subport allocation.
+ */
+ if (uinfo->spu_subport_cnt <= 1)
+ goto bail;
+ if (uinfo->spu_subport_cnt > 4) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ num_slaves = uinfo->spu_subport_cnt - 1;
+ pd->subport_uregbase = vmalloc(PAGE_SIZE * num_slaves);
+ if (!pd->subport_uregbase) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
+ size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE) * num_slaves;
+ pd->subport_rcvhdr_base = vmalloc(size);
+ if (!pd->subport_rcvhdr_base) {
+ ret = -ENOMEM;
+ goto bail_ureg;
+ }
+
+ pd->subport_rcvegrbuf = vmalloc(pd->port_rcvegrbuf_chunks *
+ pd->port_rcvegrbuf_size *
+ num_slaves);
+ if (!pd->subport_rcvegrbuf) {
+ ret = -ENOMEM;
+ goto bail_rhdr;
+ }
+
+ pd->port_subport_cnt = uinfo->spu_subport_cnt;
+ pd->port_subport_id = uinfo->spu_subport_id;
+ pd->active_slaves = 1;
+ goto bail;
+
+bail_rhdr:
+ vfree(pd->subport_rcvhdr_base);
+bail_ureg:
+ vfree(pd->subport_uregbase);
+ pd->subport_uregbase = NULL;
+bail:
+ return ret;
+}
+
static int try_alloc_port(struct ipath_devdata *dd, int port,
- struct file *fp)
+ struct file *fp,
+ const struct ipath_user_info *uinfo)
{
+ struct ipath_portdata *pd;
int ret;
- if (!dd->ipath_pd[port]) {
- void *p, *ptmp;
+ if (!(pd = dd->ipath_pd[port])) {
+ void *ptmp;
- p = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
+ pd = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
/*
* Allocate memory for use in ipath_tid_update() just once
ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
dd->ipath_rcvtidcnt * sizeof(struct page **),
GFP_KERNEL);
- if (!p || !ptmp) {
+ if (!pd || !ptmp) {
ipath_dev_err(dd, "Unable to allocate portdata "
"memory, failing open\n");
ret = -ENOMEM;
- kfree(p);
+ kfree(pd);
kfree(ptmp);
goto bail;
}
- dd->ipath_pd[port] = p;
+ dd->ipath_pd[port] = pd;
dd->ipath_pd[port]->port_port = port;
dd->ipath_pd[port]->port_dd = dd;
dd->ipath_pd[port]->port_tid_pg_list = ptmp;
init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
}
- if (!dd->ipath_pd[port]->port_cnt) {
- dd->ipath_pd[port]->port_cnt = 1;
- fp->private_data = (void *) dd->ipath_pd[port];
+ if (!pd->port_cnt) {
+ pd->userversion = uinfo->spu_userversion;
+ init_user_egr_sizes(pd);
+ if ((ret = init_subports(dd, pd, uinfo)) != 0)
+ goto bail;
ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
current->comm, current->pid, dd->ipath_unit,
port);
- dd->ipath_pd[port]->port_pid = current->pid;
- strncpy(dd->ipath_pd[port]->port_comm, current->comm,
- sizeof(dd->ipath_pd[port]->port_comm));
+ pd->port_cnt = 1;
+ port_fp(fp) = pd;
+ pd->port_pid = current->pid;
+ strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
ipath_stats.sps_ports++;
ret = 0;
- goto bail;
- }
- ret = -EBUSY;
+ } else
+ ret = -EBUSY;
bail:
return ret;
| IPATH_LINKUNK));
}
-static int find_free_port(int unit, struct file *fp)
+static int find_free_port(int unit, struct file *fp,
+ const struct ipath_user_info *uinfo)
{
struct ipath_devdata *dd = ipath_lookup(unit);
int ret, i;
goto bail;
}
- for (i = 0; i < dd->ipath_cfgports; i++) {
- ret = try_alloc_port(dd, i, fp);
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ ret = try_alloc_port(dd, i, fp, uinfo);
if (ret != -EBUSY)
goto bail;
}
return ret;
}
-static int find_best_unit(struct file *fp)
+static int find_best_unit(struct file *fp,
+ const struct ipath_user_info *uinfo)
{
int ret = 0, i, prefunit = -1, devmax;
int maxofallports, npresent, nup;
int ndev;
- (void) ipath_count_units(&npresent, &nup, &maxofallports);
+ devmax = ipath_count_units(&npresent, &nup, &maxofallports);
/*
* This code is present to allow a knowledgeable person to
if (prefunit != -1)
devmax = prefunit + 1;
- else
- devmax = ipath_count_units(NULL, NULL, NULL);
recheck:
for (i = 1; i < maxofallports; i++) {
for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
* next.
*/
continue;
- ret = try_alloc_port(dd, i, fp);
+ ret = try_alloc_port(dd, i, fp, uinfo);
if (!ret)
goto done;
}
return ret;
}
+static int find_shared_port(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int devmax, ndev, i;
+ int ret = 0;
+
+ devmax = ipath_count_units(NULL, NULL, NULL);
+
+ for (ndev = 0; ndev < devmax; ndev++) {
+ struct ipath_devdata *dd = ipath_lookup(ndev);
+
+ if (!dd)
+ continue;
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ /* Skip ports which are not yet open */
+ if (!pd || !pd->port_cnt)
+ continue;
+ /* Skip port if it doesn't match the requested one */
+ if (pd->port_subport_id != uinfo->spu_subport_id)
+ continue;
+ /* Verify the sharing process matches the master */
+ if (pd->port_subport_cnt != uinfo->spu_subport_cnt ||
+ pd->userversion != uinfo->spu_userversion ||
+ pd->port_cnt >= pd->port_subport_cnt) {
+ ret = -EINVAL;
+ goto done;
+ }
+ port_fp(fp) = pd;
+ subport_fp(fp) = pd->port_cnt++;
+ tidcursor_fp(fp) = 0;
+ pd->active_slaves |= 1 << subport_fp(fp);
+ ipath_cdbg(PROC,
+ "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
+ current->comm, current->pid,
+ subport_fp(fp),
+ pd->port_comm, pd->port_pid,
+ dd->ipath_unit, pd->port_port);
+ ret = 1;
+ goto done;
+ }
+ }
+
+done:
+ return ret;
+}
+
static int ipath_open(struct inode *in, struct file *fp)
{
- int ret, user_minor;
+ /* The real work is performed later in ipath_do_user_init() */
+ fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
+ return fp->private_data ? 0 : -ENOMEM;
+}
+
+static int ipath_do_user_init(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int ret;
+ struct ipath_portdata *pd;
+ struct ipath_devdata *dd;
+ u32 head32;
+ int i_minor;
+ unsigned swminor;
+
+ /* Check to be sure we haven't already initialized this file */
+ if (port_fp(fp)) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* for now, if major version is different, bail */
+ if ((uinfo->spu_userversion >> 16) != IPATH_USER_SWMAJOR) {
+ ipath_dbg("User major version %d not same as driver "
+ "major %d\n", uinfo->spu_userversion >> 16,
+ IPATH_USER_SWMAJOR);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ swminor = uinfo->spu_userversion & 0xffff;
+ if (swminor != IPATH_USER_SWMINOR)
+ ipath_dbg("User minor version %d not same as driver "
+ "minor %d\n", swminor, IPATH_USER_SWMINOR);
mutex_lock(&ipath_mutex);
- user_minor = iminor(in) - IPATH_USER_MINOR_BASE;
+ if (swminor == IPATH_USER_SWMINOR && uinfo->spu_subport_cnt &&
+ (ret = find_shared_port(fp, uinfo))) {
+ mutex_unlock(&ipath_mutex);
+ if (ret > 0)
+ ret = 0;
+ goto done;
+ }
+
+ i_minor = iminor(fp->f_dentry->d_inode) - IPATH_USER_MINOR_BASE;
ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)in->i_rdev, user_minor);
+ (long)fp->f_dentry->d_inode->i_rdev, i_minor);
- if (user_minor)
- ret = find_free_port(user_minor - 1, fp);
+ if (i_minor)
+ ret = find_free_port(i_minor - 1, fp, uinfo);
else
- ret = find_best_unit(fp);
+ ret = find_best_unit(fp, uinfo);
mutex_unlock(&ipath_mutex);
+
+ if (ret)
+ goto done;
+
+ pd = port_fp(fp);
+ dd = pd->port_dd;
+
+ if (uinfo->spu_rcvhdrsize) {
+ ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
+ if (ret)
+ goto done;
+ }
+
+ /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
+
+ /* for right now, kernel piobufs are at end, so port 1 is at 0 */
+ pd->port_piobufs = dd->ipath_piobufbase +
+ dd->ipath_pbufsport * (pd->port_port - 1) * dd->ipath_palign;
+ ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n",
+ pd->port_port, pd->port_piobufs);
+
+ /*
+ * Now allocate the rcvhdr Q and eager TIDs; skip the TID
+ * array for time being. If pd->port_port > chip-supported,
+ * we need to do extra stuff here to handle by handling overflow
+ * through port 0, someday
+ */
+ ret = ipath_create_rcvhdrq(dd, pd);
+ if (!ret)
+ ret = ipath_create_user_egr(pd);
+ if (ret)
+ goto done;
+
+ /*
+ * set the eager head register for this port to the current values
+ * of the tail pointers, since we don't know if they were
+ * updated on last use of the port.
+ */
+ head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
+ ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
+ dd->ipath_lastegrheads[pd->port_port] = -1;
+ dd->ipath_lastrcvhdrqtails[pd->port_port] = -1;
+ ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
+ pd->port_port, head32);
+ pd->port_tidcursor = 0; /* start at beginning after open */
+ /*
+ * now enable the port; the tail registers will be written to memory
+ * by the chip as soon as it sees the write to
+ * dd->ipath_kregs->kr_rcvctrl. The update only happens on
+ * transition from 0 to 1, so clear it first, then set it as part of
+ * enabling the port. This will (very briefly) affect any other
+ * open ports, but it shouldn't be long enough to be an issue.
+ * We explictly set the in-memory copy to 0 beforehand, so we don't
+ * have to wait to be sure the DMA update has happened.
+ */
+ *pd->port_rcvhdrtail_kvaddr = 0ULL;
+ set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
+ &dd->ipath_rcvctrl);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+done:
return ret;
}
static int ipath_close(struct inode *in, struct file *fp)
{
int ret = 0;
+ struct ipath_filedata *fd;
struct ipath_portdata *pd;
struct ipath_devdata *dd;
unsigned port;
mutex_lock(&ipath_mutex);
- pd = port_fp(fp);
- port = pd->port_port;
+ fd = (struct ipath_filedata *) fp->private_data;
fp->private_data = NULL;
+ pd = fd->pd;
+ if (!pd) {
+ mutex_unlock(&ipath_mutex);
+ goto bail;
+ }
+ if (--pd->port_cnt) {
+ /*
+ * XXX If the master closes the port before the slave(s),
+ * revoke the mmap for the eager receive queue so
+ * the slave(s) don't wait for receive data forever.
+ */
+ pd->active_slaves &= ~(1 << fd->subport);
+ mutex_unlock(&ipath_mutex);
+ goto bail;
+ }
+ port = pd->port_port;
dd = pd->port_dd;
if (pd->port_hdrqfull) {
/* clean up the pkeys for this port user */
ipath_clean_part_key(pd, dd);
-
-
/*
* be paranoid, and never write 0's to these, just use an
* unused part of the port 0 tail page. Of course,
dd->ipath_f_clear_tids(dd, pd->port_port);
}
- pd->port_cnt = 0;
pd->port_pid = 0;
-
dd->ipath_pd[pd->port_port] = NULL; /* before releasing mutex */
mutex_unlock(&ipath_mutex);
ipath_free_pddata(dd, pd); /* after releasing the mutex */
+bail:
+ kfree(fd);
return ret;
}
-static int ipath_port_info(struct ipath_portdata *pd,
+static int ipath_port_info(struct ipath_portdata *pd, u16 subport,
struct ipath_port_info __user *uinfo)
{
struct ipath_port_info info;
int nup;
int ret;
+ size_t sz;
(void) ipath_count_units(NULL, &nup, NULL);
info.num_active = nup;
info.unit = pd->port_dd->ipath_unit;
info.port = pd->port_port;
+ info.subport = subport;
+ /* Don't return new fields if old library opened the port. */
+ if ((pd->userversion & 0xffff) == IPATH_USER_SWMINOR) {
+ /* Number of user ports available for this device. */
+ info.num_ports = pd->port_dd->ipath_cfgports - 1;
+ info.num_subports = pd->port_subport_cnt;
+ sz = sizeof(info);
+ } else
+ sz = sizeof(info) - 2 * sizeof(u16);
- if (copy_to_user(uinfo, &info, sizeof(info))) {
+ if (copy_to_user(uinfo, &info, sz)) {
ret = -EFAULT;
goto bail;
}
return ret;
}
+static int ipath_get_slave_info(struct ipath_portdata *pd,
+ void __user *slave_mask_addr)
+{
+ int ret = 0;
+
+ if (copy_to_user(slave_mask_addr, &pd->active_slaves, sizeof(u32)))
+ ret = -EFAULT;
+ return ret;
+}
+
static ssize_t ipath_write(struct file *fp, const char __user *data,
size_t count, loff_t *off)
{
dest = &cmd.cmd.part_key;
src = &ucmd->cmd.part_key;
break;
+ case IPATH_CMD_SLAVE_INFO:
+ copy = sizeof(cmd.cmd.slave_mask_addr);
+ dest = &cmd.cmd.slave_mask_addr;
+ src = &ucmd->cmd.slave_mask_addr;
+ break;
default:
ret = -EINVAL;
goto bail;
consumed += copy;
pd = port_fp(fp);
+ if (!pd && cmd.type != IPATH_CMD_USER_INIT) {
+ ret = -EINVAL;
+ goto bail;
+ }
switch (cmd.type) {
case IPATH_CMD_USER_INIT:
- ret = ipath_do_user_init(pd, &cmd.cmd.user_info);
- if (ret < 0)
+ ret = ipath_do_user_init(fp, &cmd.cmd.user_info);
+ if (ret)
goto bail;
ret = ipath_get_base_info(
- pd, (void __user *) (unsigned long)
+ fp, (void __user *) (unsigned long)
cmd.cmd.user_info.spu_base_info,
cmd.cmd.user_info.spu_base_info_size);
break;
case IPATH_CMD_RECV_CTRL:
- ret = ipath_manage_rcvq(pd, cmd.cmd.recv_ctrl);
+ ret = ipath_manage_rcvq(pd, subport_fp(fp), cmd.cmd.recv_ctrl);
break;
case IPATH_CMD_PORT_INFO:
- ret = ipath_port_info(pd,
+ ret = ipath_port_info(pd, subport_fp(fp),
(struct ipath_port_info __user *)
(unsigned long) cmd.cmd.port_info);
break;
case IPATH_CMD_TID_UPDATE:
- ret = ipath_tid_update(pd, &cmd.cmd.tid_info);
+ ret = ipath_tid_update(pd, fp, &cmd.cmd.tid_info);
break;
case IPATH_CMD_TID_FREE:
- ret = ipath_tid_free(pd, &cmd.cmd.tid_info);
+ ret = ipath_tid_free(pd, subport_fp(fp), &cmd.cmd.tid_info);
break;
case IPATH_CMD_SET_PART_KEY:
ret = ipath_set_part_key(pd, cmd.cmd.part_key);
break;
+ case IPATH_CMD_SLAVE_INFO:
+ ret = ipath_get_slave_info(pd,
+ (void __user *) (unsigned long)
+ cmd.cmd.slave_mask_addr);
+ break;
}
if (ret >= 0)
bail:
return;
}
-
projects / karo-tx-linux.git / commitdiff