powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards

The mpc85xx_mds_setup_arch() function is incomprehensible
and unmaintainable. Factor out all QE specific stuff into
mpc85xx_mds_qe_init() and mpc85xx_mds_reset_ucc_phys().

Also move QE stuff out of mpc85xx_mds_pic_init().

The diff is unreadable, but only because the code was so. ;-)
It should be better now, and less indented.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 9dadcffd9947320cd04786b65d0bfa714720309a..c8be7b528bb0fd0a5f572bfdfe1eb670117c34c5 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -177,63 +177,89 @@ static void __init mpc85xx_publish_qe_devices(void)
 
        of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
 }
-#else
-static void __init mpc85xx_publish_qe_devices(void) { }
-#endif /* CONFIG_QUICC_ENGINE */
 
-static void __init mpc85xx_mds_setup_arch(void)
+static void __init mpc85xx_mds_reset_ucc_phys(void)
 {
        struct device_node *np;
-       static u8 __iomem *bcsr_regs = NULL;
-#ifdef CONFIG_PCI
-       struct pci_controller *hose;
-#endif
-       dma_addr_t max = 0xffffffff;
-
-       if (ppc_md.progress)
-               ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
+       static u8 __iomem *bcsr_regs;
 
        /* Map BCSR area */
        np = of_find_node_by_name(NULL, "bcsr");
-       if (np != NULL) {
-               struct resource res;
+       if (!np)
+               return;
 
-               of_address_to_resource(np, 0, &res);
-               bcsr_regs = ioremap(res.start, res.end - res.start +1);
-               of_node_put(np);
-       }
+       bcsr_regs = of_iomap(np, 0);
+       of_node_put(np);
+       if (!bcsr_regs)
+               return;
 
-#ifdef CONFIG_PCI
-       for_each_node_by_type(np, "pci") {
-               if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-                   of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-                       struct resource rsrc;
-                       of_address_to_resource(np, 0, &rsrc);
-                       if ((rsrc.start & 0xfffff) == 0x8000)
-                               fsl_add_bridge(np, 1);
-                       else
-                               fsl_add_bridge(np, 0);
+       if (machine_is(mpc8568_mds)) {
+#define BCSR_UCC1_GETH_EN      (0x1 << 7)
+#define BCSR_UCC2_GETH_EN      (0x1 << 7)
+#define BCSR_UCC1_MODE_MSK     (0x3 << 4)
+#define BCSR_UCC2_MODE_MSK     (0x3 << 0)
 
-                       hose = pci_find_hose_for_OF_device(np);
-                       max = min(max, hose->dma_window_base_cur +
-                                       hose->dma_window_size);
+               /* Turn off UCC1 & UCC2 */
+               clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+               clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+
+               /* Mode is RGMII, all bits clear */
+               clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+                                        BCSR_UCC2_MODE_MSK);
+
+               /* Turn UCC1 & UCC2 on */
+               setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+               setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+       } else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST   (0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST  (0x1 << 1)
+#define BCSR_UCC_RGMII         (0x1 << 6)
+#define BCSR_UCC_RTBI          (0x1 << 5)
+               /*
+                * U-Boot mangles interrupt polarity for Marvell PHYs,
+                * so reset built-in and UEM Marvell PHYs, this puts
+                * the PHYs into their normal state.
+                */
+               clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+               setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+               setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+               clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+               for (np = NULL; (np = of_find_compatible_node(np,
+                                               "network",
+                                               "ucc_geth")) != NULL;) {
+                       const unsigned int *prop;
+                       int ucc_num;
+
+                       prop = of_get_property(np, "cell-index", NULL);
+                       if (prop == NULL)
+                               continue;
+
+                       ucc_num = *prop - 1;
+
+                       prop = of_get_property(np, "phy-connection-type", NULL);
+                       if (prop == NULL)
+                               continue;
+
+                       if (strcmp("rtbi", (const char *)prop) == 0)
+                               clrsetbits_8(&bcsr_regs[7 + ucc_num],
+                                       BCSR_UCC_RGMII, BCSR_UCC_RTBI);
                }
+       } else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+               /* Reset Micrel PHY */
+               clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+               setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
        }
-#endif
 
-#ifdef CONFIG_SMP
-       mpc85xx_smp_init();
-#endif
+       iounmap(bcsr_regs);
+}
 
-#ifdef CONFIG_SWIOTLB
-       if (lmb_end_of_DRAM() > max) {
-               ppc_swiotlb_enable = 1;
-               set_pci_dma_ops(&swiotlb_dma_ops);
-               ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-       }
-#endif
+static void __init mpc85xx_mds_qe_init(void)
+{
+       struct device_node *np;
 
-#ifdef CONFIG_QUICC_ENGINE
        np = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!np) {
                np = of_find_node_by_name(NULL, "qe");
@@ -260,70 +286,7 @@ static void __init mpc85xx_mds_setup_arch(void)
                        par_io_of_config(ucc);
        }
 
-       if (bcsr_regs) {
-               if (machine_is(mpc8568_mds)) {
-#define BCSR_UCC1_GETH_EN      (0x1 << 7)
-#define BCSR_UCC2_GETH_EN      (0x1 << 7)
-#define BCSR_UCC1_MODE_MSK     (0x3 << 4)
-#define BCSR_UCC2_MODE_MSK     (0x3 << 0)
-
-                       /* Turn off UCC1 & UCC2 */
-                       clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-                       clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
-
-                       /* Mode is RGMII, all bits clear */
-                       clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
-                                                BCSR_UCC2_MODE_MSK);
-
-                       /* Turn UCC1 & UCC2 on */
-                       setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-                       setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
-               } else if (machine_is(mpc8569_mds)) {
-#define BCSR7_UCC12_GETHnRST   (0x1 << 2)
-#define BCSR8_UEM_MARVELL_RST  (0x1 << 1)
-#define BCSR_UCC_RGMII         (0x1 << 6)
-#define BCSR_UCC_RTBI          (0x1 << 5)
-                       /*
-                        * U-Boot mangles interrupt polarity for Marvell PHYs,
-                        * so reset built-in and UEM Marvell PHYs, this puts
-                        * the PHYs into their normal state.
-                        */
-                       clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
-                       setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
-
-                       setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
-                       clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
-
-                       for (np = NULL; (np = of_find_compatible_node(np,
-                                                       "network",
-                                                       "ucc_geth")) != NULL;) {
-                               const unsigned int *prop;
-                               int ucc_num;
-
-                               prop = of_get_property(np, "cell-index", NULL);
-                               if (prop == NULL)
-                                       continue;
-
-                               ucc_num = *prop - 1;
-
-                               prop = of_get_property(np, "phy-connection-type", NULL);
-                               if (prop == NULL)
-                                       continue;
-
-                               if (strcmp("rtbi", (const char *)prop) == 0)
-                                       clrsetbits_8(&bcsr_regs[7 + ucc_num],
-                                               BCSR_UCC_RGMII, BCSR_UCC_RTBI);
-                       }
-
-               } else if (machine_is(p1021_mds)) {
-#define BCSR11_ENET_MICRST     (0x1 << 5)
-                       /* Reset Micrel PHY */
-                       clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
-                       setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
-               }
-
-               iounmap(bcsr_regs);
-       }
+       mpc85xx_mds_reset_ucc_phys();
 
        if (machine_is(p1021_mds)) {
 #define MPC85xx_PMUXCR_OFFSET           0x60
@@ -358,7 +321,79 @@ static void __init mpc85xx_mds_setup_arch(void)
                }
 
        }
+}
+
+static void __init mpc85xx_mds_qeic_init(void)
+{
+       struct device_node *np;
+
+       np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+       if (!of_device_is_available(np)) {
+               of_node_put(np);
+               return;
+       }
+
+       np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+       if (!np) {
+               np = of_find_node_by_type(NULL, "qeic");
+               if (!np)
+                       return;
+       }
+
+       if (machine_is(p1021_mds))
+               qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+                               qe_ic_cascade_high_mpic);
+       else
+               qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+       of_node_put(np);
+}
+#else
+static void __init mpc85xx_publish_qe_devices(void) { }
+static void __init mpc85xx_mds_qe_init(void) { }
+static void __init mpc85xx_mds_qeic_init(void) { }
 #endif /* CONFIG_QUICC_ENGINE */
+
+static void __init mpc85xx_mds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+       struct pci_controller *hose;
+#endif
+       dma_addr_t max = 0xffffffff;
+
+       if (ppc_md.progress)
+               ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+       for_each_node_by_type(np, "pci") {
+               if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+                   of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+                       struct resource rsrc;
+                       of_address_to_resource(np, 0, &rsrc);
+                       if ((rsrc.start & 0xfffff) == 0x8000)
+                               fsl_add_bridge(np, 1);
+                       else
+                               fsl_add_bridge(np, 0);
+
+                       hose = pci_find_hose_for_OF_device(np);
+                       max = min(max, hose->dma_window_base_cur +
+                                       hose->dma_window_size);
+               }
+       }
+#endif
+
+#ifdef CONFIG_SMP
+       mpc85xx_smp_init();
+#endif
+
+       mpc85xx_mds_qe_init();
+
+#ifdef CONFIG_SWIOTLB
+       if (lmb_end_of_DRAM() > max) {
+               ppc_swiotlb_enable = 1;
+               set_pci_dma_ops(&swiotlb_dma_ops);
+               ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+       }
+#endif
 }
 
 
@@ -465,28 +500,7 @@ static void __init mpc85xx_mds_pic_init(void)
        of_node_put(np);
 
        mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-       np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-       if (!of_device_is_available(np)) {
-               of_node_put(np);
-               return;
-       }
-
-       np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-       if (!np) {
-               np = of_find_node_by_type(NULL, "qeic");
-               if (!np)
-                       return;
-       }
-
-       if (machine_is(p1021_mds))
-               qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-                               qe_ic_cascade_high_mpic);
-       else
-               qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-       of_node_put(np);
-#endif                         /* CONFIG_QUICC_ENGINE */
+       mpc85xx_mds_qeic_init();
 }
 
 static int __init mpc85xx_mds_probe(void)