mtd: nand: use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR

On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.

Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index f2f6e874d4ded5b97833e422c39e1f73e22e4f19..c554c2f9c0ecde7237b5af48e9921acb864cdc84 100644 (file)
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -407,9 +407,17 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
                         page_addr, column);
 
                elbc_fcm_ctrl->column = column;
-               elbc_fcm_ctrl->oob = 0;
                elbc_fcm_ctrl->use_mdr = 1;
 
+               if (column >= mtd->writesize) {
+                       /* OOB area */
+                       column -= mtd->writesize;
+                       elbc_fcm_ctrl->oob = 1;
+               } else {
+                       WARN_ON(column != 0);
+                       elbc_fcm_ctrl->oob = 0;
+               }
+
                fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
                      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
                      (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
@@ -434,16 +442,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
                                 (FIR_OP_CW1 << FIR_OP6_SHIFT) |
                                 (FIR_OP_RS  << FIR_OP7_SHIFT));
 
-                       if (column >= mtd->writesize) {
+                       if (elbc_fcm_ctrl->oob)
                                /* OOB area --> READOOB */
-                               column -= mtd->writesize;
                                fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
-                               elbc_fcm_ctrl->oob = 1;
-                       } else {
-                               WARN_ON(column != 0);
+                       else
                                /* First 256 bytes --> READ0 */
                                fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
-                       }
                }
 
                out_be32(&lbc->fcr, fcr);