If the userspace hasn't been prepared to ignore the unreliable "opened"
events and the unreliable initial state notification, Linux users can use
the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+ When this option is specified, the ACPI button driver reports the
+ initial lid state using the returning value of the _LID control method
+ and whether the "opened"/"closed" events are paired fully relies on the
+ firmware implementation.
+ This option can be used to fix some platforms where the returning value
+ of the _LID control method is reliable but the initial lid state
+ notification is missing.
+ This option is the default behavior during the period the userspace
+ isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
When this option is specified, the ACPI button driver always reports the
initial lid state as "opened" and whether the "opened"/"closed" events
are paired fully relies on the firmware implementation.
This may fix some platforms where the returning value of the _LID
control method is not reliable and the initial lid state notification is
missing.
- This option is the default behavior during the period the userspace
- isn't ready to handle the buggy AML tables.
If the userspace has been prepared to ignore the unreliable "opened" events
and the unreliable initial state notification, Linux users should always
use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
When this option is specified, the ACPI button driver never reports the
initial lid state and there is a compensation mechanism implemented to
ensure that the reliable "closed" notifications can always be delievered
.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
+.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
=======================
CPU Performance Scaling
interface it comes from and may not be easily represented in an abstract,
platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
to bypass the governor layer and implement their own performance scaling
-algorithms. That is done by the ``intel_pstate`` scaling driver.
+algorithms. That is done by the |intel_pstate| scaling driver.
``CPUFreq`` Policy Objects
into account. That is achieved by invoking the governor's ``->stop`` and
``->start()`` callbacks, in this order, for the entire policy.
-As mentioned before, the ``intel_pstate`` scaling driver bypasses the scaling
+As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
-Consequently, if ``intel_pstate`` is used, scaling governors are not attached to
+Consequently, if |intel_pstate| is used, scaling governors are not attached to
new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
to register per-CPU utilization update callbacks for each policy. These
callbacks are invoked by the CPU scheduler in the same way as for scaling
-governors, but in the ``intel_pstate`` case they both determine the P-state to
+governors, but in the |intel_pstate| case they both determine the P-state to
use and change the hardware configuration accordingly in one go from scheduler
context.
``scaling_available_governors``
List of ``CPUFreq`` scaling governors present in the kernel that can
- be attached to this policy or (if the ``intel_pstate`` scaling driver is
+ be attached to this policy or (if the |intel_pstate| scaling driver is
in use) list of scaling algorithms provided by the driver that can be
applied to this policy.
the CPU is actually running at (due to hardware design and other
limitations).
- Some scaling drivers (e.g. ``intel_pstate``) attempt to provide
+ Some scaling drivers (e.g. |intel_pstate|) attempt to provide
information more precisely reflecting the current CPU frequency through
this attribute, but that still may not be the exact current CPU
frequency as seen by the hardware at the moment.
``scaling_governor``
The scaling governor currently attached to this policy or (if the
- ``intel_pstate`` scaling driver is in use) the scaling algorithm
+ |intel_pstate| scaling driver is in use) the scaling algorithm
provided by the driver that is currently applied to this policy.
This attribute is read-write and writing to it will cause a new scaling
governor to be attached to this policy or a new scaling algorithm
provided by the scaling driver to be applied to it (in the
- ``intel_pstate`` case), as indicated by the string written to this
+ |intel_pstate| case), as indicated by the string written to this
attribute (which must be one of the names listed by the
``scaling_available_governors`` attribute described above).
the "boost" setting for the whole system. It is not present if the underlying
scaling driver does not support the frequency boost mechanism (or supports it,
but provides a driver-specific interface for controlling it, like
-``intel_pstate``).
+|intel_pstate|).
If the value in this file is 1, the frequency boost mechanism is enabled. This
means that either the hardware can be put into states in which it is able to
:maxdepth: 2
cpufreq
+ intel_pstate
.. only:: subproject and html
--- /dev/null
+===============================================
+``intel_pstate`` CPU Performance Scaling Driver
+===============================================
+
+::
+
+ Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+General Information
+===================
+
+``intel_pstate`` is a part of the
+:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
+(``CPUFreq``). It is a scaling driver for the Sandy Bridge and later
+generations of Intel processors. Note, however, that some of those processors
+may not be supported. [To understand ``intel_pstate`` it is necessary to know
+how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
+you have not done that yet.]
+
+For the processors supported by ``intel_pstate``, the P-state concept is broader
+than just an operating frequency or an operating performance point (see the
+`LinuxCon Europe 2015 presentation by Kristen Accardi <LCEU2015_>`_ for more
+information about that). For this reason, the representation of P-states used
+by ``intel_pstate`` internally follows the hardware specification (for details
+refer to `Intel® 64 and IA-32 Architectures Software Developer’s Manual
+Volume 3: System Programming Guide <SDM_>`_). However, the ``CPUFreq`` core
+uses frequencies for identifying operating performance points of CPUs and
+frequencies are involved in the user space interface exposed by it, so
+``intel_pstate`` maps its internal representation of P-states to frequencies too
+(fortunately, that mapping is unambiguous). At the same time, it would not be
+practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
+available frequencies due to the possible size of it, so the driver does not do
+that. Some functionality of the core is limited by that.
+
+Since the hardware P-state selection interface used by ``intel_pstate`` is
+available at the logical CPU level, the driver always works with individual
+CPUs. Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
+object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
+equivalent to CPUs. In particular, this means that they become "inactive" every
+time the corresponding CPU is taken offline and need to be re-initialized when
+it goes back online.
+
+``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
+only way to pass early-configuration-time parameters to it is via the kernel
+command line. However, its configuration can be adjusted via ``sysfs`` to a
+great extent. In some configurations it even is possible to unregister it via
+``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
+registered (see `below <status_attr_>`_).
+
+
+Operation Modes
+===============
+
+``intel_pstate`` can operate in three different modes: in the active mode with
+or without hardware-managed P-states support and in the passive mode. Which of
+them will be in effect depends on what kernel command line options are used and
+on the capabilities of the processor.
+
+Active Mode
+-----------
+
+This is the default operation mode of ``intel_pstate``. If it works in this
+mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
+policies contains the string "intel_pstate".
+
+In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
+provides its own scaling algorithms for P-state selection. Those algorithms
+can be applied to ``CPUFreq`` policies in the same way as generic scaling
+governors (that is, through the ``scaling_governor`` policy attribute in
+``sysfs``). [Note that different P-state selection algorithms may be chosen for
+different policies, but that is not recommended.]
+
+They are not generic scaling governors, but their names are the same as the
+names of some of those governors. Moreover, confusingly enough, they generally
+do not work in the same way as the generic governors they share the names with.
+For example, the ``powersave`` P-state selection algorithm provided by
+``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
+(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
+
+There are two P-state selection algorithms provided by ``intel_pstate`` in the
+active mode: ``powersave`` and ``performance``. The way they both operate
+depends on whether or not the hardware-managed P-states (HWP) feature has been
+enabled in the processor and possibly on the processor model.
+
+Which of the P-state selection algorithms is used by default depends on the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
+Namely, if that option is set, the ``performance`` algorithm will be used by
+default, and the other one will be used by default if it is not set.
+
+Active Mode With HWP
+~~~~~~~~~~~~~~~~~~~~
+
+If the processor supports the HWP feature, it will be enabled during the
+processor initialization and cannot be disabled after that. It is possible
+to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
+kernel in the command line.
+
+If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
+select P-states by itself, but still it can give hints to the processor's
+internal P-state selection logic. What those hints are depends on which P-state
+selection algorithm has been applied to the given policy (or to the CPU it
+corresponds to).
+
+Even though the P-state selection is carried out by the processor automatically,
+``intel_pstate`` registers utilization update callbacks with the CPU scheduler
+in this mode. However, they are not used for running a P-state selection
+algorithm, but for periodic updates of the current CPU frequency information to
+be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
+
+HWP + ``performance``
+.....................
+
+In this configuration ``intel_pstate`` will write 0 to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
+internal P-state selection logic is expected to focus entirely on performance.
+
+This will override the EPP/EPB setting coming from the ``sysfs`` interface
+(see `Energy vs Performance Hints`_ below).
+
+Also, in this configuration the range of P-states available to the processor's
+internal P-state selection logic is always restricted to the upper boundary
+(that is, the maximum P-state that the driver is allowed to use).
+
+HWP + ``powersave``
+...................
+
+In this configuration ``intel_pstate`` will set the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
+previously set to via ``sysfs`` (or whatever default value it was
+set to by the platform firmware). This usually causes the processor's
+internal P-state selection logic to be less performance-focused.
+
+Active Mode Without HWP
+~~~~~~~~~~~~~~~~~~~~~~~
+
+This is the default operation mode for processors that do not support the HWP
+feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
+in the kernel command line. However, in this mode ``intel_pstate`` may refuse
+to work with the given processor if it does not recognize it. [Note that
+``intel_pstate`` will never refuse to work with any processor with the HWP
+feature enabled.]
+
+In this mode ``intel_pstate`` registers utilization update callbacks with the
+CPU scheduler in order to run a P-state selection algorithm, either
+``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+setting in ``sysfs``. The current CPU frequency information to be made
+available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
+periodically updated by those utilization update callbacks too.
+
+``performance``
+...............
+
+Without HWP, this P-state selection algorithm is always the same regardless of
+the processor model and platform configuration.
+
+It selects the maximum P-state it is allowed to use, subject to limits set via
+``sysfs``, every time the P-state selection computations are carried out by the
+driver's utilization update callback for the given CPU (that does not happen
+more often than every 10 ms), but the hardware configuration will not be changed
+if the new P-state is the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is set.
+
+``powersave``
+.............
+
+Without HWP, this P-state selection algorithm generally depends on the
+processor model and/or the system profile setting in the ACPI tables and there
+are two variants of it.
+
+One of them is used with processors from the Atom line and (regardless of the
+processor model) on platforms with the system profile in the ACPI tables set to
+"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or
+"workstation". It is also used with processors supporting the HWP feature if
+that feature has not been enabled (that is, with the ``intel_pstate=no_hwp``
+argument in the kernel command line). It is similar to the algorithm
+implemented by the generic ``schedutil`` scaling governor except that the
+utilization metric used by it is based on numbers coming from feedback
+registers of the CPU. It generally selects P-states proportional to the
+current CPU utilization, so it is referred to as the "proportional" algorithm.
+
+The second variant of the ``powersave`` P-state selection algorithm, used in all
+of the other cases (generally, on processors from the Core line, so it is
+referred to as the "Core" algorithm), is based on the values read from the APERF
+and MPERF feedback registers and the previously requested target P-state.
+It does not really take CPU utilization into account explicitly, but as a rule
+it causes the CPU P-state to ramp up very quickly in response to increased
+utilization which is generally desirable in server environments.
+
+Regardless of the variant, this algorithm is run by the driver's utilization
+update callback for the given CPU when it is invoked by the CPU scheduler, but
+not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this
+particular case <Tuning Interface in debugfs_>`_). Like in the ``performance``
+case, the hardware configuration is not touched if the new P-state turns out to
+be the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is not set.
+
+Passive Mode
+------------
+
+This mode is used if the ``intel_pstate=passive`` argument is passed to the
+kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
+Like in the active mode without HWP support, in this mode ``intel_pstate`` may
+refuse to work with the given processor if it does not recognize it.
+
+If the driver works in this mode, the ``scaling_driver`` policy attribute in
+``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
+Then, the driver behaves like a regular ``CPUFreq`` scaling driver. That is,
+it is invoked by generic scaling governors when necessary to talk to the
+hardware in order to change the P-state of a CPU (in particular, the
+``schedutil`` governor can invoke it directly from scheduler context).
+
+While in this mode, ``intel_pstate`` can be used with all of the (generic)
+scaling governors listed by the ``scaling_available_governors`` policy attribute
+in ``sysfs`` (and the P-state selection algorithms described above are not
+used). Then, it is responsible for the configuration of policy objects
+corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
+governors attached to the policy objects) with accurate information on the
+maximum and minimum operating frequencies supported by the hardware (including
+the so-called "turbo" frequency ranges). In other words, in the passive mode
+the entire range of available P-states is exposed by ``intel_pstate`` to the
+``CPUFreq`` core. However, in this mode the driver does not register
+utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
+information comes from the ``CPUFreq`` core (and is the last frequency selected
+by the current scaling governor for the given policy).
+
+
+.. _turbo:
+
+Turbo P-states Support
+======================
+
+In the majority of cases, the entire range of P-states available to
+``intel_pstate`` can be divided into two sub-ranges that correspond to
+different types of processor behavior, above and below a boundary that
+will be referred to as the "turbo threshold" in what follows.
+
+The P-states above the turbo threshold are referred to as "turbo P-states" and
+the whole sub-range of P-states they belong to is referred to as the "turbo
+range". These names are related to the Turbo Boost technology allowing a
+multicore processor to opportunistically increase the P-state of one or more
+cores if there is enough power to do that and if that is not going to cause the
+thermal envelope of the processor package to be exceeded.
+
+Specifically, if software sets the P-state of a CPU core within the turbo range
+(that is, above the turbo threshold), the processor is permitted to take over
+performance scaling control for that core and put it into turbo P-states of its
+choice going forward. However, that permission is interpreted differently by
+different processor generations. Namely, the Sandy Bridge generation of
+processors will never use any P-states above the last one set by software for
+the given core, even if it is within the turbo range, whereas all of the later
+processor generations will take it as a license to use any P-states from the
+turbo range, even above the one set by software. In other words, on those
+processors setting any P-state from the turbo range will enable the processor
+to put the given core into all turbo P-states up to and including the maximum
+supported one as it sees fit.
+
+One important property of turbo P-states is that they are not sustainable. More
+precisely, there is no guarantee that any CPUs will be able to stay in any of
+those states indefinitely, because the power distribution within the processor
+package may change over time or the thermal envelope it was designed for might
+be exceeded if a turbo P-state was used for too long.
+
+In turn, the P-states below the turbo threshold generally are sustainable. In
+fact, if one of them is set by software, the processor is not expected to change
+it to a lower one unless in a thermal stress or a power limit violation
+situation (a higher P-state may still be used if it is set for another CPU in
+the same package at the same time, for example).
+
+Some processors allow multiple cores to be in turbo P-states at the same time,
+but the maximum P-state that can be set for them generally depends on the number
+of cores running concurrently. The maximum turbo P-state that can be set for 3
+cores at the same time usually is lower than the analogous maximum P-state for
+2 cores, which in turn usually is lower than the maximum turbo P-state that can
+be set for 1 core. The one-core maximum turbo P-state is thus the maximum
+supported one overall.
+
+The maximum supported turbo P-state, the turbo threshold (the maximum supported
+non-turbo P-state) and the minimum supported P-state are specific to the
+processor model and can be determined by reading the processor's model-specific
+registers (MSRs). Moreover, some processors support the Configurable TDP
+(Thermal Design Power) feature and, when that feature is enabled, the turbo
+threshold effectively becomes a configurable value that can be set by the
+platform firmware.
+
+Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
+the entire range of available P-states, including the whole turbo range, to the
+``CPUFreq`` core and (in the passive mode) to generic scaling governors. This
+generally causes turbo P-states to be set more often when ``intel_pstate`` is
+used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
+for more information).
+
+Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
+(even if the Configurable TDP feature is enabled in the processor), its
+``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
+work as expected in all cases (that is, if set to disable turbo P-states, it
+always should prevent ``intel_pstate`` from using them).
+
+
+Processor Support
+=================
+
+To handle a given processor ``intel_pstate`` requires a number of different
+pieces of information on it to be known, including:
+
+ * The minimum supported P-state.
+
+ * The maximum supported `non-turbo P-state <turbo_>`_.
+
+ * Whether or not turbo P-states are supported at all.
+
+ * The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
+ are supported).
+
+ * The scaling formula to translate the driver's internal representation
+ of P-states into frequencies and the other way around.
+
+Generally, ways to obtain that information are specific to the processor model
+or family. Although it often is possible to obtain all of it from the processor
+itself (using model-specific registers), there are cases in which hardware
+manuals need to be consulted to get to it too.
+
+For this reason, there is a list of supported processors in ``intel_pstate`` and
+the driver initialization will fail if the detected processor is not in that
+list, unless it supports the `HWP feature <Active Mode_>`_. [The interface to
+obtain all of the information listed above is the same for all of the processors
+supporting the HWP feature, which is why they all are supported by
+``intel_pstate``.]
+
+
+User Space Interface in ``sysfs``
+=================================
+
+Global Attributes
+-----------------
+
+``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level. They are located in the
+``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
+CPUs.
+
+Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
+argument is passed to the kernel in the command line.
+
+``max_perf_pct``
+ Maximum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``min_perf_pct``
+ Minimum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``num_pstates``
+ Number of P-states supported by the processor (between 0 and 255
+ inclusive) including both turbo and non-turbo P-states (see
+ `Turbo P-states Support`_).
+
+ The value of this attribute is not affected by the ``no_turbo``
+ setting described `below <no_turbo_attr_>`_.
+
+ This attribute is read-only.
+
+``turbo_pct``
+ Ratio of the `turbo range <turbo_>`_ size to the size of the entire
+ range of supported P-states, in percent.
+
+ This attribute is read-only.
+
+.. _no_turbo_attr:
+
+``no_turbo``
+ If set (equal to 1), the driver is not allowed to set any turbo P-states
+ (see `Turbo P-states Support`_). If unset (equalt to 0, which is the
+ default), turbo P-states can be set by the driver.
+ [Note that ``intel_pstate`` does not support the general ``boost``
+ attribute (supported by some other scaling drivers) which is replaced
+ by this one.]
+
+ This attrubute does not affect the maximum supported frequency value
+ supplied to the ``CPUFreq`` core and exposed via the policy interface,
+ but it affects the maximum possible value of per-policy P-state limits
+ (see `Interpretation of Policy Attributes`_ below for details).
+
+.. _status_attr:
+
+``status``
+ Operation mode of the driver: "active", "passive" or "off".
+
+ "active"
+ The driver is functional and in the `active mode
+ <Active Mode_>`_.
+
+ "passive"
+ The driver is functional and in the `passive mode
+ <Passive Mode_>`_.
+
+ "off"
+ The driver is not functional (it is not registered as a scaling
+ driver with the ``CPUFreq`` core).
+
+ This attribute can be written to in order to change the driver's
+ operation mode or to unregister it. The string written to it must be
+ one of the possible values of it and, if successful, the write will
+ cause the driver to switch over to the operation mode represented by
+ that string - or to be unregistered in the "off" case. [Actually,
+ switching over from the active mode to the passive mode or the other
+ way around causes the driver to be unregistered and registered again
+ with a different set of callbacks, so all of its settings (the global
+ as well as the per-policy ones) are then reset to their default
+ values, possibly depending on the target operation mode.]
+
+ That only is supported in some configurations, though (for example, if
+ the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
+ the operation mode of the driver cannot be changed), and if it is not
+ supported in the current configuration, writes to this attribute with
+ fail with an appropriate error.
+
+Interpretation of Policy Attributes
+-----------------------------------
+
+The interpretation of some ``CPUFreq`` policy attributes described in
+:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
+and it generally depends on the driver's `operation mode <Operation Modes_>`_.
+
+First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
+``scaling_cur_freq`` attributes are produced by applying a processor-specific
+multiplier to the internal P-state representation used by ``intel_pstate``.
+Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
+attributes are capped by the frequency corresponding to the maximum P-state that
+the driver is allowed to set.
+
+If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
+not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
+and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
+Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
+``scaling_min_freq`` to go down to that value if they were above it before.
+However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
+restored after unsetting ``no_turbo``, unless these attributes have been written
+to after ``no_turbo`` was set.
+
+If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
+and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
+which also is the value of ``cpuinfo_max_freq`` in either case.
+
+Next, the following policy attributes have special meaning if
+``intel_pstate`` works in the `active mode <Active Mode_>`_:
+
+``scaling_available_governors``
+ List of P-state selection algorithms provided by ``intel_pstate``.
+
+``scaling_governor``
+ P-state selection algorithm provided by ``intel_pstate`` currently in
+ use with the given policy.
+
+``scaling_cur_freq``
+ Frequency of the average P-state of the CPU represented by the given
+ policy for the time interval between the last two invocations of the
+ driver's utilization update callback by the CPU scheduler for that CPU.
+
+The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
+same as for other scaling drivers.
+
+Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
+depends on the operation mode of the driver. Namely, it is either
+"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
+`passive mode <Passive Mode_>`_).
+
+Coordination of P-State Limits
+------------------------------
+
+``intel_pstate`` allows P-state limits to be set in two ways: with the help of
+the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
+<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
+``CPUFreq`` policy attributes. The coordination between those limits is based
+on the following rules, regardless of the current operation mode of the driver:
+
+ 1. All CPUs are affected by the global limits (that is, none of them can be
+ requested to run faster than the global maximum and none of them can be
+ requested to run slower than the global minimum).
+
+ 2. Each individual CPU is affected by its own per-policy limits (that is, it
+ cannot be requested to run faster than its own per-policy maximum and it
+ cannot be requested to run slower than its own per-policy minimum).
+
+ 3. The global and per-policy limits can be set independently.
+
+If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the
+resulting effective values are written into its registers whenever the limits
+change in order to request its internal P-state selection logic to always set
+P-states within these limits. Otherwise, the limits are taken into account by
+scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
+every time before setting a new P-state for a CPU.
+
+Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
+is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
+at all and the only way to set the limits is by using the policy attributes.
+
+
+Energy vs Performance Hints
+---------------------------
+
+If ``intel_pstate`` works in the `active mode with the HWP feature enabled
+<Active Mode With HWP_>`_ in the processor, additional attributes are present
+in every ``CPUFreq`` policy directory in ``sysfs``. They are intended to allow
+user space to help ``intel_pstate`` to adjust the processor's internal P-state
+selection logic by focusing it on performance or on energy-efficiency, or
+somewhere between the two extremes:
+
+``energy_performance_preference``
+ Current value of the energy vs performance hint for the given policy
+ (or the CPU represented by it).
+
+ The hint can be changed by writing to this attribute.
+
+``energy_performance_available_preferences``
+ List of strings that can be written to the
+ ``energy_performance_preference`` attribute.
+
+ They represent different energy vs performance hints and should be
+ self-explanatory, except that ``default`` represents whatever hint
+ value was set by the platform firmware.
+
+Strings written to the ``energy_performance_preference`` attribute are
+internally translated to integer values written to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob.
+
+[Note that tasks may by migrated from one CPU to another by the scheduler's
+load-balancing algorithm and if different energy vs performance hints are
+set for those CPUs, that may lead to undesirable outcomes. To avoid such
+issues it is better to set the same energy vs performance hint for all CPUs
+or to pin every task potentially sensitive to them to a specific CPU.]
+
+.. _acpi-cpufreq:
+
+``intel_pstate`` vs ``acpi-cpufreq``
+====================================
+
+On the majority of systems supported by ``intel_pstate``, the ACPI tables
+provided by the platform firmware contain ``_PSS`` objects returning information
+that can be used for CPU performance scaling (refer to the `ACPI specification`_
+for details on the ``_PSS`` objects and the format of the information returned
+by them).
+
+The information returned by the ACPI ``_PSS`` objects is used by the
+``acpi-cpufreq`` scaling driver. On systems supported by ``intel_pstate``
+the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
+interface, but the set of P-states it can use is limited by the ``_PSS``
+output.
+
+On those systems each ``_PSS`` object returns a list of P-states supported by
+the corresponding CPU which basically is a subset of the P-states range that can
+be used by ``intel_pstate`` on the same system, with one exception: the whole
+`turbo range <turbo_>`_ is represented by one item in it (the topmost one). By
+convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
+than the frequency of the highest non-turbo P-state listed by it, but the
+corresponding P-state representation (following the hardware specification)
+returned for it matches the maximum supported turbo P-state (or is the
+special value 255 meaning essentially "go as high as you can get").
+
+The list of P-states returned by ``_PSS`` is reflected by the table of
+available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
+scaling governors and the minimum and maximum supported frequencies reported by
+it come from that list as well. In particular, given the special representation
+of the turbo range described above, this means that the maximum supported
+frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
+of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
+affects decisions made by the scaling governors, except for ``powersave`` and
+``performance``.
+
+For example, if a given governor attempts to select a frequency proportional to
+estimated CPU load and maps the load of 100% to the maximum supported frequency
+(possibly multiplied by a constant), then it will tend to choose P-states below
+the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
+in that case the turbo range corresponds to a small fraction of the frequency
+band it can use (1 MHz vs 1 GHz or more). In consequence, it will only go to
+the turbo range for the highest loads and the other loads above 50% that might
+benefit from running at turbo frequencies will be given non-turbo P-states
+instead.
+
+One more issue related to that may appear on systems supporting the
+`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
+turbo threshold. Namely, if that is not coordinated with the lists of P-states
+returned by ``_PSS`` properly, there may be more than one item corresponding to
+a turbo P-state in those lists and there may be a problem with avoiding the
+turbo range (if desirable or necessary). Usually, to avoid using turbo
+P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
+by ``_PSS``, but that is not sufficient when there are other turbo P-states in
+the list returned by it.
+
+Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
+`passive mode <Passive Mode_>`_, except that the number of P-states it can set
+is limited to the ones listed by the ACPI ``_PSS`` objects.
+
+
+Kernel Command Line Options for ``intel_pstate``
+================================================
+
+Several kernel command line options can be used to pass early-configuration-time
+parameters to ``intel_pstate`` in order to enforce specific behavior of it. All
+of them have to be prepended with the ``intel_pstate=`` prefix.
+
+``disable``
+ Do not register ``intel_pstate`` as the scaling driver even if the
+ processor is supported by it.
+
+``passive``
+ Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
+ start with.
+
+ This option implies the ``no_hwp`` one described below.
+
+``force``
+ Register ``intel_pstate`` as the scaling driver instead of
+ ``acpi-cpufreq`` even if the latter is preferred on the given system.
+
+ This may prevent some platform features (such as thermal controls and
+ power capping) that rely on the availability of ACPI P-states
+ information from functioning as expected, so it should be used with
+ caution.
+
+ This option does not work with processors that are not supported by
+ ``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
+ driver is used instead of ``acpi-cpufreq``.
+
+``no_hwp``
+ Do not enable the `hardware-managed P-states (HWP) feature
+ <Active Mode With HWP_>`_ even if it is supported by the processor.
+
+``hwp_only``
+ Register ``intel_pstate`` as the scaling driver only if the
+ `hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is
+ supported by the processor.
+
+``support_acpi_ppc``
+ Take ACPI ``_PPC`` performance limits into account.
+
+ If the preferred power management profile in the FADT (Fixed ACPI
+ Description Table) is set to "Enterprise Server" or "Performance
+ Server", the ACPI ``_PPC`` limits are taken into account by default
+ and this option has no effect.
+
+``per_cpu_perf_limits``
+ Use per-logical-CPU P-State limits (see `Coordination of P-state
+ Limits`_ for details).
+
+
+Diagnostics and Tuning
+======================
+
+Trace Events
+------------
+
+There are two static trace events that can be used for ``intel_pstate``
+diagnostics. One of them is the ``cpu_frequency`` trace event generally used
+by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
+to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if
+it works in the `active mode <Active Mode_>`_.
+
+The following sequence of shell commands can be used to enable them and see
+their output (if the kernel is generally configured to support event tracing)::
+
+ # cd /sys/kernel/debug/tracing/
+ # echo 1 > events/power/pstate_sample/enable
+ # echo 1 > events/power/cpu_frequency/enable
+ # cat trace
+ gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
+ cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
+
+If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
+``cpu_frequency`` trace event will be triggered either by the ``schedutil``
+scaling governor (for the policies it is attached to), or by the ``CPUFreq``
+core (for the policies with other scaling governors).
+
+``ftrace``
+----------
+
+The ``ftrace`` interface can be used for low-level diagnostics of
+``intel_pstate``. For example, to check how often the function to set a
+P-state is called, the ``ftrace`` filter can be set to to
+:c:func:`intel_pstate_set_pstate`::
+
+ # cd /sys/kernel/debug/tracing/
+ # cat available_filter_functions | grep -i pstate
+ intel_pstate_set_pstate
+ intel_pstate_cpu_init
+ ...
+ # echo intel_pstate_set_pstate > set_ftrace_filter
+ # echo function > current_tracer
+ # cat trace | head -15
+ # tracer: function
+ #
+ # entries-in-buffer/entries-written: 80/80 #P:4
+ #
+ # _-----=> irqs-off
+ # / _----=> need-resched
+ # | / _---=> hardirq/softirq
+ # || / _--=> preempt-depth
+ # ||| / delay
+ # TASK-PID CPU# |||| TIMESTAMP FUNCTION
+ # | | | |||| | |
+ Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
+ <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
+
+Tuning Interface in ``debugfs``
+-------------------------------
+
+The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of
+processors in the active mode <powersave_>`_ is based on a `PID controller`_
+whose parameters were chosen to address a number of different use cases at the
+same time. However, it still is possible to fine-tune it to a specific workload
+and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is
+provided for this purpose. [Note that the ``pstate_snb`` directory will be
+present only if the specific P-state selection algorithm matching the interface
+in it actually is in use.]
+
+The following files present in that directory can be used to modify the PID
+controller parameters at run time:
+
+| ``deadband``
+| ``d_gain_pct``
+| ``i_gain_pct``
+| ``p_gain_pct``
+| ``sample_rate_ms``
+| ``setpoint``
+
+Note, however, that achieving desirable results this way generally requires
+expert-level understanding of the power vs performance tradeoff, so extra care
+is recommended when attempting to do that.
+
+
+.. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
+.. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
+.. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
+.. _PID controller: https://en.wikipedia.org/wiki/PID_controller
+++ /dev/null
-Intel P-State driver
---------------------
-
-This driver provides an interface to control the P-State selection for the
-SandyBridge+ Intel processors.
-
-The following document explains P-States:
-http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
-As stated in the document, P-State doesn’t exactly mean a frequency. However, for
-the sake of the relationship with cpufreq, P-State and frequency are used
-interchangeably.
-
-Understanding the cpufreq core governors and policies are important before
-discussing more details about the Intel P-State driver. Based on what callbacks
-a cpufreq driver provides to the cpufreq core, it can support two types of
-drivers:
-- with target_index() callback: In this mode, the drivers using cpufreq core
-simply provide the minimum and maximum frequency limits and an additional
-interface target_index() to set the current frequency. The cpufreq subsystem
-has a number of scaling governors ("performance", "powersave", "ondemand",
-etc.). Depending on which governor is in use, cpufreq core will call for
-transitions to a specific frequency using target_index() callback.
-- setpolicy() callback: In this mode, drivers do not provide target_index()
-callback, so cpufreq core can't request a transition to a specific frequency.
-The driver provides minimum and maximum frequency limits and callbacks to set a
-policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
-The cpufreq core can request the driver to operate in any of the two policies:
-"performance" and "powersave". The driver decides which frequency to use based
-on the above policy selection considering minimum and maximum frequency limits.
-
-The Intel P-State driver falls under the latter category, which implements the
-setpolicy() callback. This driver decides what P-State to use based on the
-requested policy from the cpufreq core. If the processor is capable of
-selecting its next P-State internally, then the driver will offload this
-responsibility to the processor (aka HWP: Hardware P-States). If not, the
-driver implements algorithms to select the next P-State.
-
-Since these policies are implemented in the driver, they are not same as the
-cpufreq scaling governors implementation, even if they have the same name in
-the cpufreq sysfs (scaling_governors). For example the "performance" policy is
-similar to cpufreq’s "performance" governor, but "powersave" is completely
-different than the cpufreq "powersave" governor. The strategy here is similar
-to cpufreq "ondemand", where the requested P-State is related to the system load.
-
-Sysfs Interface
-
-In addition to the frequency-controlling interfaces provided by the cpufreq
-core, the driver provides its own sysfs files to control the P-State selection.
-These files have been added to /sys/devices/system/cpu/intel_pstate/.
-Any changes made to these files are applicable to all CPUs (even in a
-multi-package system, Refer to later section on placing "Per-CPU limits").
-
- max_perf_pct: Limits the maximum P-State that will be requested by
- the driver. It states it as a percentage of the available performance. The
- available (P-State) performance may be reduced by the no_turbo
- setting described below.
-
- min_perf_pct: Limits the minimum P-State that will be requested by
- the driver. It states it as a percentage of the max (non-turbo)
- performance level.
-
- no_turbo: Limits the driver to selecting P-State below the turbo
- frequency range.
-
- turbo_pct: Displays the percentage of the total performance that
- is supported by hardware that is in the turbo range. This number
- is independent of whether turbo has been disabled or not.
-
- num_pstates: Displays the number of P-States that are supported
- by hardware. This number is independent of whether turbo has
- been disabled or not.
-
-For example, if a system has these parameters:
- Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
- Max non turbo ratio: 0x17
- Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
-
-Sysfs will show :
- max_perf_pct:100, which corresponds to 1 core ratio
- min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
- no_turbo:0, turbo is not disabled
- num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
- turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
-
-Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
-Volume 3: System Programming Guide" to understand ratios.
-
-There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/
-that can be used for controlling the operation mode of the driver:
-
- status: Three settings are possible:
- "off" - The driver is not in use at this time.
- "active" - The driver works as a P-state governor (default).
- "passive" - The driver works as a regular cpufreq one and collaborates
- with the generic cpufreq governors (it sets P-states as
- requested by those governors).
- The current setting is returned by reads from this attribute. Writing one
- of the above strings to it changes the operation mode as indicated by that
- string, if possible. If HW-managed P-states (HWP) are enabled, it is not
- possible to change the driver's operation mode and attempts to write to
- this attribute will fail.
-
-cpufreq sysfs for Intel P-State
-
-Since this driver registers with cpufreq, cpufreq sysfs is also presented.
-There are some important differences, which need to be considered.
-
-scaling_cur_freq: This displays the real frequency which was used during
-the last sample period instead of what is requested. Some other cpufreq driver,
-like acpi-cpufreq, displays what is requested (Some changes are on the
-way to fix this for acpi-cpufreq driver). The same is true for frequencies
-displayed at /proc/cpuinfo.
-
-scaling_governor: This displays current active policy. Since each CPU has a
-cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
-is not possible with Intel P-States, as there is one common policy for all
-CPUs. Here, the last requested policy will be applicable to all CPUs. It is
-suggested that one use the cpupower utility to change policy to all CPUs at the
-same time.
-
-scaling_setspeed: This attribute can never be used with Intel P-State.
-
-scaling_max_freq/scaling_min_freq: This interface can be used similarly to
-the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
-are converted to nearest possible P-State, this is prone to rounding errors.
-This method is not preferred to limit performance.
-
-affected_cpus: Not used
-related_cpus: Not used
-
-For contemporary Intel processors, the frequency is controlled by the
-processor itself and the P-State exposed to software is related to
-performance levels. The idea that frequency can be set to a single
-frequency is fictional for Intel Core processors. Even if the scaling
-driver selects a single P-State, the actual frequency the processor
-will run at is selected by the processor itself.
-
-Per-CPU limits
-
-The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
-the intel_pstate driver to use per-CPU performance limits. When it is set,
-the sysfs control interface described above is subject to limitations.
-- The following controls are not available for both read and write
- /sys/devices/system/cpu/intel_pstate/max_perf_pct
- /sys/devices/system/cpu/intel_pstate/min_perf_pct
-- The following controls can be used to set performance limits, as far as the
-architecture of the processor permits:
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
-- User can still observe turbo percent and number of P-States from
- /sys/devices/system/cpu/intel_pstate/turbo_pct
- /sys/devices/system/cpu/intel_pstate/num_pstates
-- User can read write system wide turbo status
- /sys/devices/system/cpu/no_turbo
-
-Support of energy performance hints
-It is possible to provide hints to the HWP algorithms in the processor
-to be more performance centric to more energy centric. When the driver
-is using HWP, two additional cpufreq sysfs attributes are presented for
-each logical CPU.
-These attributes are:
- - energy_performance_available_preferences
- - energy_performance_preference
-
-To get list of supported hints:
-$ cat energy_performance_available_preferences
- default performance balance_performance balance_power power
-
-The current preference can be read or changed via cpufreq sysfs
-attribute "energy_performance_preference". Reading from this attribute
-will display current effective setting. User can write any of the valid
-preference string to this attribute. User can always restore to power-on
-default by writing "default".
-
-Since threads can migrate to different CPUs, this is possible that the
-new CPU may have different energy performance preference than the previous
-one. To avoid such issues, either threads can be pinned to specific CPUs
-or set the same energy performance preference value to all CPUs.
-
-Tuning Intel P-State driver
-
-When the performance can be tuned using PID (Proportional Integral
-Derivative) controller, debugfs files are provided for adjusting performance.
-They are presented under:
-/sys/kernel/debug/pstate_snb/
-
-The PID tunable parameters are:
- deadband
- d_gain_pct
- i_gain_pct
- p_gain_pct
- sample_rate_ms
- setpoint
-
-To adjust these parameters, some understanding of driver implementation is
-necessary. There are some tweeks described here, but be very careful. Adjusting
-them requires expert level understanding of power and performance relationship.
-These limits are only useful when the "powersave" policy is active.
-
--To make the system more responsive to load changes, sample_rate_ms can
-be adjusted (current default is 10ms).
--To make the system use higher performance, even if the load is lower, setpoint
-can be adjusted to a lower number. This will also lead to faster ramp up time
-to reach the maximum P-State.
-If there are no derivative and integral coefficients, The next P-State will be
-equal to:
- current P-State - ((setpoint - current cpu load) * p_gain_pct)
-
-For example, if the current PID parameters are (Which are defaults for the core
-processors like SandyBridge):
- deadband = 0
- d_gain_pct = 0
- i_gain_pct = 0
- p_gain_pct = 20
- sample_rate_ms = 10
- setpoint = 97
-
-If the current P-State = 0x08 and current load = 100, this will result in the
-next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
-goes up by only 1. If during next sample interval the current load doesn't
-change and still 100, then P-State goes up by one again. This process will
-continue as long as the load is more than the setpoint until the maximum P-State
-is reached.
-
-For the same load at setpoint = 60, this will result in the next P-State
-= 0x08 - ((60 - 100) * 0.2) = 16
-So by changing the setpoint from 97 to 60, there is an increase of the
-next P-State from 9 to 16. So this will make processor execute at higher
-P-State for the same CPU load. If the load continues to be more than the
-setpoint during next sample intervals, then P-State will go up again till the
-maximum P-State is reached. But the ramp up time to reach the maximum P-State
-will be much faster when the setpoint is 60 compared to 97.
-
-Debugging Intel P-State driver
-
-Event tracing
-To debug P-State transition, the Linux event tracing interface can be used.
-There are two specific events, which can be enabled (Provided the kernel
-configs related to event tracing are enabled).
-
-# cd /sys/kernel/debug/tracing/
-# echo 1 > events/power/pstate_sample/enable
-# echo 1 > events/power/cpu_frequency/enable
-# cat trace
-gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
- scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
- freq=2474476
-cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
-
-
-Using ftrace
-
-If function level tracing is required, the Linux ftrace interface can be used.
-For example if we want to check how often a function to set a P-State is
-called, we can set ftrace filter to intel_pstate_set_pstate.
-
-# cd /sys/kernel/debug/tracing/
-# cat available_filter_functions | grep -i pstate
-intel_pstate_set_pstate
-intel_pstate_cpu_init
-...
-
-# echo intel_pstate_set_pstate > set_ftrace_filter
-# echo function > current_tracer
-# cat trace | head -15
-# tracer: function
-#
-# entries-in-buffer/entries-written: 80/80 #P:4
-#
-# _-----=> irqs-off
-# / _----=> need-resched
-# | / _---=> hardirq/softirq
-# || / _--=> preempt-depth
-# ||| / delay
-# TASK-PID CPU# |||| TIMESTAMP FUNCTION
-# | | | |||| | |
- Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
- gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
- gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
- <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
Required root node property:
compatible: "amlogic,s912", "amlogic,meson-gxm";
-Board compatible values:
+Board compatible values (alphabetically, grouped by SoC):
+
- "geniatech,atv1200" (Meson6)
+
- "minix,neo-x8" (Meson8)
- - "tronfy,mxq" (Meson8b)
+
- "hardkernel,odroid-c1" (Meson8b)
+ - "tronfy,mxq" (Meson8b)
+
+ - "amlogic,p200" (Meson gxbb)
+ - "amlogic,p201" (Meson gxbb)
+ - "friendlyarm,nanopi-k2" (Meson gxbb)
+ - "hardkernel,odroid-c2" (Meson gxbb)
+ - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
- - "hardkernel,odroid-c2" (Meson gxbb)
- - "amlogic,p200" (Meson gxbb)
- - "amlogic,p201" (Meson gxbb)
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
+
- "amlogic,p212" (Meson gxl s905x)
+ - "hwacom,amazetv" (Meson gxl s905x)
- "khadas,vim" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
- - "hwacom,amazetv" (Meson gxl s905x)
+
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
+ - "kingnovel,r-box-pro" (Meson gxm S912)
- "nexbox,a1" (Meson gxm s912)
--- /dev/null
+Broadcom Stingray device tree bindings
+------------------------------------------------
+
+Boards with Stingray shall have the following properties:
+
+Required root node property:
+
+Stingray Combo SVK board
+compatible = "brcm,bcm958742k", "brcm,stingray";
+
+Stingray SST100 board
+compatible = "brcm,bcm958742t", "brcm,stingray";
Required root node properties:
- compatible = "hisilicon,hi3660";
+HiKey960 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
"mediatek,mt6592"
"mediatek,mt6755"
"mediatek,mt6795"
+ "mediatek,mt6797"
+ "mediatek,mt7622"
"mediatek,mt7623"
"mediatek,mt8127"
"mediatek,mt8135"
- Evaluation board for MT6795(Helio X10):
Required root node properties:
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+- Evaluation board for MT6797(Helio X20):
+ Required root node properties:
+ - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+- Reference board variant 1 for MT7622:
+ Required root node properties:
+ - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
- Evaluation board for MT7623:
Required root node properties:
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
--- /dev/null
+Realtek platforms device tree bindings
+--------------------------------------
+
+
+RTD1295 SoC
+===========
+
+Required root node properties:
+
+ - compatible : must contain "realtek,rtd1295"
+
+
+Root node property compatible must contain, depending on board:
+
+ - Zidoo X9S: "zidoo,x9s"
+
+
+Example:
+
+ compatible = "zidoo,x9s", "realtek,rtd1295";
Required root node properties:
- compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+- Firefly Firefly-RK3399 board:
+ Required root node properties:
+ - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
Required properties:
- reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
- chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
+ chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding.
--------
PLL and leaf clock compatible strings for BCM63138 are:
"brcm,bcm63138-armpll"
+
+Stingray
+-----------
+PLL and leaf clock compatible strings for Stingray are:
+ "brcm,sr-genpll0"
+ "brcm,sr-genpll1"
+ "brcm,sr-genpll2"
+ "brcm,sr-genpll3"
+ "brcm,sr-genpll4"
+ "brcm,sr-genpll5"
+ "brcm,sr-genpll6"
+
+ "brcm,sr-lcpll0"
+ "brcm,sr-lcpll1"
+ "brcm,sr-lcpll-pcie"
+
+
+The following table defines the set of PLL/clock index and ID for Stingray.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ noc_clk genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ fs4_hf_clk genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ crypto_ae_clk genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ raid_ae_clk genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ 48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_usb_ref lcpll0 3 BCM_SR_LCPLL0_USB_REF_CLK
+ sata_refpn lcpll0 3 BCM_SR_LCPLL0_SATA_REFPN_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ wan lcpll1 1 BCM_SR_LCPLL0_WAN_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
Required properties:
- compatible: value should be either of the following.
- (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
- (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
- (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
- (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
- (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
+ "mediatek,mt6577-i2c": for i2c compatible with mt6577.
+ "mediatek,mt6589-i2c": for i2c compatible with mt6589.
+ "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
+ "mediatek,mt8173-i2c": for i2c compatible with mt8173.
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
control gpios
- threshold: allows setting the "click"-threshold in the range
- from 20 to 80.
+ from 0 to 80.
- gain: allows setting the sensitivity in the range from 0 to
31. Note that lower values indicate higher
-+Mediatek 65xx/67xx/81xx sysirq
++Mediatek MT65xx/MT67xx/MT81xx sysirq
Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
interrupt.
Required properties:
-- compatible: should be one of:
- "mediatek,mt8173-sysirq"
- "mediatek,mt8135-sysirq"
- "mediatek,mt8127-sysirq"
- "mediatek,mt6795-sysirq"
- "mediatek,mt6755-sysirq"
- "mediatek,mt6592-sysirq"
- "mediatek,mt6589-sysirq"
- "mediatek,mt6582-sysirq"
- "mediatek,mt6580-sysirq"
- "mediatek,mt6577-sysirq"
- "mediatek,mt2701-sysirq"
+- compatible: should be
+ "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
+ "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
+ "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
+ "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+ "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
+ "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+ "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
+ "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
+ "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
+ "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
+ "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
+ "mediatek,mt6577-sysirq": for MT6577
+ "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
- interrupt-parent: phandle of irq parent for sysirq. The parent must
* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
Required parent device properties:
-- compatible : contains "hisilicon,hi6421-pmic";
+- compatible : One of the following chip-specific strings:
+ "hisilicon,hi6421-pmic";
+ "hisilicon,hi6421v530-pmic";
- reg : register range space of hi6421;
Supported Hi6421 sub-devices include:
- reg: Base address of PMIC on Hi6220 SoC.
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The GPIO used by PMIC IRQ.
+- #clock-cells: From common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+ default output clock name
Example:
pmic: pmic@f8000000 {
interrupt-controller;
#interrupt-cells = <2>;
pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ #clock-cells = <0>;
}
by mmc.txt and the properties used by the sdhci-esdhc driver.
Required properties:
+ - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+ Possible compatibles for PowerPC:
+ "fsl,mpc8536-esdhc"
+ "fsl,mpc8378-esdhc"
+ "fsl,p2020-esdhc"
+ "fsl,p4080-esdhc"
+ "fsl,t1040-esdhc"
+ "fsl,t4240-esdhc"
+ Possible compatibles for ARM:
+ "fsl,ls1012a-esdhc"
+ "fsl,ls1088a-esdhc"
+ "fsl,ls1043a-esdhc"
+ "fsl,ls1046a-esdhc"
+ "fsl,ls2080a-esdhc"
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
Required Properties:
* compatible: should be one of the following.
+ - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
- "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
"ext_clock" (External clock provided to the card).
- post-power-on-delay-ms : Delay in ms after powering the card and
de-asserting the reset-gpios (if any)
+- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
+ during power off of the card.
Example:
- phy-reset-active-high : If present then the reset sequence using the GPIO
specified in the "phy-reset-gpios" property is reversed (H=reset state,
L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+ a delay of phy-reset-post-delay milliseconds will be observed after the
+ phy-reset-gpios has been toggled. Can be omitted thus no delay is
+ observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
- phy-supply : regulator that powers the Ethernet PHY.
- phy-handle : phandle to the PHY device connected to this device.
- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
--- /dev/null
+HiSilicon Kirin SoCs PCIe host DT description
+
+Kirin PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible:
+ "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+ "dbi": controller configuration registers;
+ "apb": apb Ctrl register defined by Kirin;
+ "phy": apb PHY register defined by Kirin;
+ "config": PCIe configuration space registers.
+- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
+
+Optional properties:
+
+Example based on kirin960:
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
+ reg-names = "dbi","apb","phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
+ <0x0 0 0 2 &gic 0 0 0 283 4>,
+ <0x0 0 0 3 &gic 0 0 0 284 4>,
+ <0x0 0 0 4 &gic 0 0 0 285 4>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ };
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6755-uart" for MT6755 compatible UARTS
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
+ * "mediatek,mt6797-uart" for MT6797 compatible UARTS
+ * "mediatek,mt7622-uart" for MT7622 compatible UARTS
* "mediatek,mt7623-uart" for MT7623 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
The driver implements the Generic PM domain bindings described in
power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt2701-power.h
Required properties:
- compatible: Should be one of:
- "mediatek,mt2701-scpsys"
+ - "mediatek,mt6797-scpsys"
- "mediatek,mt8173-scpsys"
- #power-domain-cells: Must be 1
- reg: Address range of the SCPSYS unit
These are clocks which hardware needs to be
enabled before enabling certain power domains.
Required clocks for MT2701: "mm", "mfg", "ethif"
+ Required clocks for MT6797: "mm", "mfg", "vdec"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
Optional properties:
keymile Keymile GmbH
khadas Khadas
kinetic Kinetic Technologies
+kingnovel Kingnovel Technology Co., Ltd.
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
xunlong Shenzhen Xunlong Software CO.,Limited
zarlink Zarlink Semiconductor
zeitec ZEITEC Semiconductor Co., LTD.
+zidoo Shenzhen Zidoo Technology Co., Ltd.
zii Zodiac Inflight Innovations
zte ZTE Corp.
zyxel ZyXEL Communications Corp.
The driver allows configuration of the touch screen via a set of sysfs files:
/sys/class/input/eventX/device/device/threshold:
- allows setting the "click"-threshold in the range from 20 to 80.
+ allows setting the "click"-threshold in the range from 0 to 80.
/sys/class/input/eventX/device/device/gain:
allows setting the sensitivity in the range from 0 to 31. Note that
6-jack in back, 2-jack in front
6stack-digout
6-jack with a SPDIF out
+6stack-automute
+ 6-jack with headphone jack detection
ALC260
======
Enables docking station I/O for some Lenovos
hp-gpio-led
GPIO LED support on HP laptops
+hp-dock-gpio-mic1-led
+ HP dock with mic LED support
dell-headset-multi
Headset jack, which can also be used as mic-in
dell-headset-dock
Combo jack sensing on ALC283
tpt440-dock
Pin configs for Lenovo Thinkpad Dock support
+tpt440
+ Lenovo Thinkpad T440s setup
+tpt460
+ Lenovo Thinkpad T460/560 setup
+dual-codecs
+ Lenovo laptops with dual codecs
ALC66x/67x/892
==============
Inverted internal mic workaround
dell-headset-multi
Headset jack, which can also be used as mic-in
+dual-codecs
+ Lenovo laptops with dual codecs
ALC680
======
Inverted internal mic workaround
no-primary-hp
VAIO Z/VGC-LN51JGB workaround (for fixed speaker DAC)
+dual-codecs
+ ALC1220 dual codecs for Gaming mobos
ALC861/660
==========
Conexant 5045
=============
-laptop-hpsense
- Laptop with HP sense (old model laptop)
-laptop-micsense
- Laptop with Mic sense (old model fujitsu)
-laptop-hpmicsense
- Laptop with HP and Mic senses
-benq
- Benq R55E
-laptop-hp530
- HP 530 laptop
-test
- for testing/debugging purpose, almost all controls can be
- adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+ Fix max input level on mixer widget
+toshiba-p105
+ Toshiba P105 quirk
+hp-530
+ HP 530 quirk
Conexant 5047
=============
-laptop
- Basic Laptop config
-laptop-hp
- Laptop config for some HP models (subdevice 30A5)
-laptop-eapd
- Laptop config with EAPD support
-test
- for testing/debugging purpose, almost all controls can be
- adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+ Fix max input level on mixer widget
Conexant 5051
=============
-laptop
- Basic Laptop config (default)
-hp
- HP Spartan laptop
-hp-dv6736
- HP dv6736
-hp-f700
- HP Compaq Presario F700
-ideapad
- Lenovo IdeaPad laptop
-toshiba
- Toshiba Satellite M300
+lenovo-x200
+ Lenovo X200 quirk
Conexant 5066
=============
-laptop
- Basic Laptop config (default)
-hp-laptop
- HP laptops, e g G60
-asus
- Asus K52JU, Lenovo G560
-dell-laptop
- Dell laptops
-dell-vostro
- Dell Vostro
-olpc-xo-1_5
- OLPC XO 1.5
-ideapad
- Lenovo IdeaPad U150
+stereo-dmic
+ Workaround for inverted stereo digital mic
+gpio1
+ Enable GPIO1 pin
+headphone-mic-pin
+ Enable headphone mic NID 0x18 without detection
+tp410
+ Thinkpad T400 & co quirks
thinkpad
- Lenovo Thinkpad
+ Thinkpad mute/mic LED quirk
+lemote-a1004
+ Lemote A1004 quirk
+lemote-a1205
+ Lemote A1205 quirk
+olpc-xo
+ OLPC XO quirk
+mute-led-eapd
+ Mute LED control via EAPD
+hp-dock
+ HP dock support
+mute-led-gpio
+ Mute LED control via GPIO
STAC9200
========
Dell desktops/laptops
alienware
Alienware M17x
+asus-mobo
+ Pin configs for ASUS mobo with 5.1/SPDIF out
auto
BIOS setup (default)
Pin fixup for HP Envy TS bass speaker (NID 0x10)
hp-bnb13-eq
Hardware equalizer setup for HP laptops
+hp-envy-ts-bass
+ HP Envy TS bass support
auto
BIOS setup (default)
Cirrus Logic CS4206/4207
========================
+mbp53
+ MacBook Pro 5,3
mbp55
MacBook Pro 5,5
imac27
IMac 27 Inch
+imac27_122
+ iMac 12,2
+apple
+ Generic Apple quirk
+mbp101
+ MacBookPro 10,1
+mbp81
+ MacBookPro 8,1
+mba42
+ MacBookAir 4,2
auto
BIOS setup (default)
MacBook Air 6,1 and 6,2
gpio0
Enable GPIO 0 amp
+mbp11
+ MacBookPro 11,2
+macmini
+ MacMini 7,1
auto
BIOS setup (default)
F: drivers/media/platform/rcar_jpu.c
JSM Neo PCI based serial card
-M: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
VERSION = 4
PATCHLEVEL = 12
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Fearless Coyote
# *DOCUMENTATION*
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-b.dtb \
bcm2835-rpi-zero.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
- status = "okay";
bus-width = <4>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
bus-width = <4>;
};
};
};
+&cpu_thermal {
+ coefficients = <(-538) 407000>;
+};
+
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2835-thermal";
interrupts = <8>;
};
+&cpu_thermal {
+ coefficients = <(-538) 407000>;
+};
+
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2836-thermal";
--- /dev/null
+#include "arm64/broadcom/bcm2837-rpi-3-b.dts"
bootargs = "earlyprintk console=ttyAMA0";
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <80000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "brcm,bcm2835-thermal";
reg = <0x7e212000 0x8>;
clocks = <&clocks BCM2835_CLOCK_TSENS>;
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
*/
#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
#size-cells = <1>;
ranges;
+ syscon: syscon@1c00000 {
+ compatible = "allwinner,sun8i-h3-system-controller",
+ "syscon";
+ reg = <0x01c00000 0x1000>;
+ };
+
dma: dma-controller@01c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
interrupt-controller;
#interrupt-cells = <3>;
+ emac_rgmii_pins: emac0 {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD7", "PD8", "PD9", "PD10",
+ "PD12", "PD13", "PD15", "PD16", "PD17";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
i2c0_pins: i2c0 {
pins = "PA11", "PA12";
function = "i2c0";
clocks = <&osc24M>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x104>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+ };
+
spi0: spi@01c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
ir: ir@01f02000 {
compatible = "allwinner,sun5i-a13-ir";
- clocks = <&r_ccu 4>, <&r_ccu 11>;
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
- resets = <&r_ccu 0>;
+ resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
dts-dirs += mediatek
dts-dirs += nvidia
dts-dirs += qcom
+dts-dirs += realtek
dts-dirs += renesas
dts-dirs += rockchip
dts-dirs += socionext
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
};
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
--- /dev/null
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Win/Win Plus";
+ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
- /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+ /* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
};
aliases {
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ phy-mode = "rmii";
+ phy-handle = <&ext_rmii_phy1>;
+ status = "okay";
+
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
bias-pull-up;
};
+&mdio {
+ ext_rmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
+/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
&usb_otg {
dr_mode = "host";
status = "okay";
--- /dev/null
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+ model = "SoPine with baseboard";
+ compatible = "pine64,sopine-baseboard", "pine64,sopine",
+ "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc1v8: vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64.dtsi"
+
+/ {
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ non-removable;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
*/
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun50i-a64-ccu.h>
#size-cells = <1>;
ranges;
+ syscon: syscon@1c00000 {
+ compatible = "allwinner,sun50i-a64-system-controller",
+ "syscon";
+ reg = <0x01c00000 0x1000>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
#phy-cells = <1>;
};
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
ehci1: usb@01c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
bias-pull-up;
};
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+ "PD18", "PD19", "PD20", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ rgmii_pins: rgmii_pins {
+ pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+ "PD13", "PD15", "PD16", "PD17", "PD18",
+ "PD19", "PD20", "PD21", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
pins = "PG8", "PG9";
function = "uart1";
};
+
+ uart2_pins: uart2-pins {
+ pins = "PB0", "PB1";
+ function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ pins = "PD0", "PD1";
+ function = "uart3";
+ };
+
+ uart4_pins: uart4-pins {
+ pins = "PD2", "PD3";
+ function = "uart4";
+ };
+
+ uart4_rts_cts_pins: uart4-rts-cts-pins {
+ pins = "PD4", "PD5";
+ function = "uart4";
+ };
};
uart0: serial@1c28000 {
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 67>;
- resets = <&ccu 46>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 68>;
- resets = <&ccu 47>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 69>;
- resets = <&ccu 48>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 70>;
- resets = <&ccu 49>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 71>;
- resets = <&ccu 50>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 63>;
- resets = <&ccu 42>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 64>;
- resets = <&ccu 43>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 65>;
- resets = <&ccu 44>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
gic: interrupt-controller@1c81000 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
+
+ r_rsb_pins: rsb@0 {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ };
+ };
+
+ r_rsb: rsb@1f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 6>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
--- /dev/null
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "FriendlyARM NanoPi NEO 2";
+ compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "nanopi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "nanopi:blue:status";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
};
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
};
};
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
--- /dev/null
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-h5-orangepi-pc2.dts, which is:
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Xunlong Orange Pi Prime";
+ compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A ports' VBUS is always on */
+ usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Zero Plus2";
+ compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-ðmac {
- status = "okay";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
};
scpi_sensors: sensors {
- compatible = "arm,scpi-sensors";
+ compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
--- /dev/null
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ stat {
+ label = "nanopi-k2:blue:stat";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ vdd_5v: regulator-vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vddio_ao18: regulator-vddio-ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddio_ao3v3: regulator-vddio-ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_tf: regulator-vddio-tf {
+ compatible = "regulator-gpio";
+
+ regulator-name = "VDDIO_TF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ wifi_32k: wifi-32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi_32k>;
+ clock-names = "ext_clock";
+ };
+
+ vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_ao18>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+/* SD */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "disabled";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+ status = "disabled";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+};
+
+/* 40-pin CON1 */
+&uart_C {
+ status = "disabled";
+ pinctrl-0 = <&uart_c_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
};
};
-&scpi_clocks {
- status = "disabled";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
};
};
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&pinctrl_aobus {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
"";
};
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&i2c_A {
- status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
-};
-
-&gpio_ao {
- /*
- * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- usb-hub {
- gpio-hog;
- gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_otg_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
&saradc {
status = "okay";
vref-supply = <&vcc1v8>;
};
+&scpi_clocks {
+ status = "disabled";
+};
+
/* SD */
&sd_emmc_b {
status = "okay";
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
clock-names = "ext_clock";
};
- cvbs-connector {
+ cvbs_connector: cvbs-connector {
compatible = "composite-video-connector";
port {
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
-&ir {
+&hdmi_tx {
status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
-&usb0 {
+&ir {
status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
};
-&usb1 {
+&pwm_ef {
status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
};
/* Wireless SDIO Module */
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
};
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_pwr>;
};
-&hdmi_tx {
+&usb1_phy {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
};
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
};
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
};
};
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_vbus>;
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
+&ir {
status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
};
-&usb1 {
+&pwm_ef {
status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
};
/* Wireless SDIO Module */
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
vmmcq-sumpply = <&vcc_1v8>;
};
-&pwm_ef {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
};
panic-indicator;
};
};
+};
- cvbs-connector {
- status = "disabled";
- };
+&cvbs_connector {
+ status = "disabled";
};
ðmac {
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
};
};
-ðmac {
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
function = "spdif_out_ao";
};
};
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
};
};
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
+
+&cbus {
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SPI>;
+ status = "disabled";
+ };
+};
+
+ðmac {
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
+
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
};
};
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
};
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
-};
-
-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>; /* Do Nothing */
- };
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
-
-&hwrng {
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
-};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
/* P230 has exclusive choice between internal or external PHY */
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
linux,default-trigger = "default-on";
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
&i2c_A {
};
&sd_emmc_a {
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
phy-handle = <&internal_phy>;
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
&cvbs_vdac_port {
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
compatible = "amlogic,s905x", "amlogic,meson-gxl";
};
-/* S905X Only has access to its internal PHY */
+/* S905X only has access to its internal PHY */
ðmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
function = "spdif_out_ao";
};
};
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
+ };
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
};
};
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxl-periphs-pinctrl";
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 14 101>;
+ gpio-ranges = <&pinctrl_periphs 0 10 101>;
};
emmc_pins: emmc {
};
};
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
};
};
+ eth_link_led_pins: eth_link_led {
+ mux {
+ groups = "eth_link_led";
+ function = "eth_led";
+ };
+ };
+
+ eth_act_led_pins: eth_act_led {
+ mux {
+ groups = "eth_act_led";
+ function = "eth_led";
+ };
+ };
+
pwm_a_pins: pwm_a {
mux {
groups = "pwm_a";
};
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
&saradc {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+
+ pinctrl-0 = <ð_pins>;
pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <1000>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
&ir {
vqmmc-supply = <&vddio_boot>;
};
-ðmac {
- status = "okay";
-
- pinctrl-0 = <ð_pins>;
- pinctrl-names = "default";
-
- /* Select external PHY by default */
- phy-handle = <&external_phy>;
-
- amlogic,tx-delay-ns = <2>;
-
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
- /* External PHY is in RGMII */
- phy-mode = "rgmii";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- max-speed = <1000>;
- };
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
--- /dev/null
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+
+/ {
+ compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+ model = "R-Box Pro";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "rbox-pro:blue:on";
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ red {
+ label = "rbox-pro:red:standby";
+ gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ retain-state-suspended;
+ panic-indicator;
+ };
+ };
+
+ vddio_boot: regulator-vddio-boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>;
+ pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ amlogic,tx-delay-ns = <2>;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <1000>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: brcmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
#global-interrupts = <1>;
dma-coherent;
power-domains = <&scpi_devpd 0>;
- status = "disabled";
};
gic: interrupt-controller@2c010000 {
};
};
+ cpu_debug0: cpu_debug@22010000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x22010000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm0: etm@22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>;
};
};
+ cpu_debug1: cpu_debug@22110000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x22110000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm1: etm@22140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22140000 0 0x1000>;
};
};
+ cpu_debug2: cpu_debug@23010000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23010000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm2: etm@23040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23040000 0 0x1000>;
};
};
+ cpu_debug3: cpu_debug@23110000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23110000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm3: etm@23140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23140000 0 0x1000>;
};
};
+ cpu_debug4: cpu_debug@23210000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23210000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm4: etm@23240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23240000 0 0x1000>;
};
};
+ cpu_debug5: cpu_debug@23310000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23310000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm5: etm@23340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23340000 0 0x1000>;
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
- status = "disabled";
};
smmu_hdlcd0: iommu@7fb20000 {
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
- status = "disabled";
};
smmu_usb: iommu@7fb30000 {
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
- status = "disabled";
};
dma@7ff00000 {
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
+
+&cpu_debug0 {
+ cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
+
+&cpu_debug0 {
+ cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
};
};
};
+
+&cpu_debug0 {
+ cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
+dts-dirs := stingray
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
&uart1 {
status = "okay";
};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
interrupts = <8>;
};
+&cpu_thermal {
+ coefficients = <(-538) 412000>;
+};
+
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2837-thermal";
};
};
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ status = "disabled";
+ };
+
pwm: pwm@66010000 {
compatible = "brcm,iproc-pwm";
reg = <0x66010000 0x28>;
--- /dev/null
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio0_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 18 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+
+ sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio1_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 19 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+};
+
+&memory { /* Default DRAM banks */
+ reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9505: pca9505@20 {
+ compatible = "nxp,pca9505";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pcf8574: pcf8574@20 {
+ compatible = "nxp,pcf8574a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
+&nand {
+ status = "ok";
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&sdio0 {
+ vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+ non-removable;
+ full-pwr-cycle;
+ status = "okay";
+};
+
+&sdio1 {
+ vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+ full-pwr-cycle;
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742k", "brcm,stingray";
+ model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ssp0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 34 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&ssp1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 96 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742t", "brcm,stingray";
+ model = "Stingray SST100 (BCM958742T)";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ crmu_ref25m: crmu_ref25m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&osc>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ genpll0: genpll0@0001d104 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll0";
+ reg = <0x0001d104 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll0", "clk_125", "clk_scr",
+ "clk_250", "clk_pcie_axi",
+ "clk_paxc_axi_x2",
+ "clk_paxc_axi";
+ };
+
+ genpll3: genpll3@0001d1e0 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll3";
+ reg = <0x0001d1e0 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll3", "clk_hsls",
+ "clk_sdio";
+ };
+
+ genpll4: genpll4@0001d214 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll4";
+ reg = <0x0001d214 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll4", "clk_ccn",
+ "clk_tpiu_pll", "noc_clk",
+ "pll_chclk_fs4",
+ "clk_bridge_fscpu";
+ };
+
+ genpll5: genpll5@0001d248 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll5";
+ reg = <0x0001d248 0x32>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll5", "fs4_hf_clk",
+ "crypto_ae_clk", "raid_ae_clk";
+ };
+
+ lcpll0: lcpll0@0001d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll0";
+ reg = <0x0001d0c4 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "clk_sata_refp",
+ "clk_sata_refn", "clk_sata_350",
+ "clk_sata_500";
+ };
+
+ lcpll1: lcpll1@0001d138 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll1";
+ reg = <0x0001d138 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll1", "clk_wanpn",
+ "clk_usb_ref",
+ "timesync_evt_clk";
+ };
+
+ hsls_clk: hsls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 1>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_div2_clk: hsls_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+
+ };
+
+ hsls_div4_clk: hsls_div4_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_clk: hsls_25m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&crmu_ref25m>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_div2_clk: hsls_25m_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&hsls_25m_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ sdio0_clk: sdio0_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ sdio1_clk: sdio1_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+ pinconf: pinconf@00140000 {
+ compatible = "pinconf-single";
+ reg = <0x00140000 0x250>;
+ pinctrl-single,register-width = <32>;
+
+ /* pinconf functions */
+ };
+
+ pinmux: pinmux@0014029c {
+ compatible = "pinctrl-single";
+ reg = <0x0014029c 0x250>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xf>;
+ pinctrl-single,gpio-range = <
+ &range 0 154 MODE_GPIO
+ >;
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ /* pinctrl functions */
+ tsio_pins: pinmux_gpio_14 {
+ pinctrl-single,pins = <
+ 0x038 MODE_NITRO /* tsio_0 */
+ 0x03c MODE_NITRO /* tsio_1 */
+ >;
+ };
+
+ nor_pins: pinmux_pnor_adv_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_PNOR /* nand_ce1_n */
+ 0x0b0 MODE_PNOR /* nand_ce0_n */
+ 0x0b4 MODE_PNOR /* nand_we_n */
+ 0x0b8 MODE_PNOR /* nand_wp_n */
+ 0x0bc MODE_PNOR /* nand_re_n */
+ 0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+ 0x0c4 MODE_PNOR /* nand_io0_0 */
+ 0x0c8 MODE_PNOR /* nand_io1_0 */
+ 0x0cc MODE_PNOR /* nand_io2_0 */
+ 0x0d0 MODE_PNOR /* nand_io3_0 */
+ 0x0d4 MODE_PNOR /* nand_io4_0 */
+ 0x0d8 MODE_PNOR /* nand_io5_0 */
+ 0x0dc MODE_PNOR /* nand_io6_0 */
+ 0x0e0 MODE_PNOR /* nand_io7_0 */
+ 0x0e4 MODE_PNOR /* nand_io8_0 */
+ 0x0e8 MODE_PNOR /* nand_io9_0 */
+ 0x0ec MODE_PNOR /* nand_io10_0 */
+ 0x0f0 MODE_PNOR /* nand_io11_0 */
+ 0x0f4 MODE_PNOR /* nand_io12_0 */
+ 0x0f8 MODE_PNOR /* nand_io13_0 */
+ 0x0fc MODE_PNOR /* nand_io14_0 */
+ 0x100 MODE_PNOR /* nand_io15_0 */
+ 0x104 MODE_PNOR /* nand_ale_0 */
+ 0x108 MODE_PNOR /* nand_cle_0 */
+ 0x040 MODE_PNOR /* pnor_adv_n */
+ 0x044 MODE_PNOR /* pnor_baa_n */
+ 0x048 MODE_PNOR /* pnor_bls_0_n */
+ 0x04c MODE_PNOR /* pnor_bls_1_n */
+ 0x050 MODE_PNOR /* pnor_cre */
+ 0x054 MODE_PNOR /* pnor_cs_2_n */
+ 0x058 MODE_PNOR /* pnor_cs_1_n */
+ 0x05c MODE_PNOR /* pnor_cs_0_n */
+ 0x060 MODE_PNOR /* pnor_we_n */
+ 0x064 MODE_PNOR /* pnor_oe_n */
+ 0x068 MODE_PNOR /* pnor_intr */
+ 0x06c MODE_PNOR /* pnor_dat_0 */
+ 0x070 MODE_PNOR /* pnor_dat_1 */
+ 0x074 MODE_PNOR /* pnor_dat_2 */
+ 0x078 MODE_PNOR /* pnor_dat_3 */
+ 0x07c MODE_PNOR /* pnor_dat_4 */
+ 0x080 MODE_PNOR /* pnor_dat_5 */
+ 0x084 MODE_PNOR /* pnor_dat_6 */
+ 0x088 MODE_PNOR /* pnor_dat_7 */
+ 0x08c MODE_PNOR /* pnor_dat_8 */
+ 0x090 MODE_PNOR /* pnor_dat_9 */
+ 0x094 MODE_PNOR /* pnor_dat_10 */
+ 0x098 MODE_PNOR /* pnor_dat_11 */
+ 0x09c MODE_PNOR /* pnor_dat_12 */
+ 0x0a0 MODE_PNOR /* pnor_dat_13 */
+ 0x0a4 MODE_PNOR /* pnor_dat_14 */
+ 0x0a8 MODE_PNOR /* pnor_dat_15 */
+ >;
+ };
+
+ nand_pins: pinmux_nand_ce1_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_NAND /* nand_ce1_n */
+ 0x0b0 MODE_NAND /* nand_ce0_n */
+ 0x0b4 MODE_NAND /* nand_we_n */
+ 0x0b8 MODE_NAND /* nand_wp_n */
+ 0x0bc MODE_NAND /* nand_re_n */
+ 0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+ 0x0c4 MODE_NAND /* nand_io0_0 */
+ 0x0c8 MODE_NAND /* nand_io1_0 */
+ 0x0cc MODE_NAND /* nand_io2_0 */
+ 0x0d0 MODE_NAND /* nand_io3_0 */
+ 0x0d4 MODE_NAND /* nand_io4_0 */
+ 0x0d8 MODE_NAND /* nand_io5_0 */
+ 0x0dc MODE_NAND /* nand_io6_0 */
+ 0x0e0 MODE_NAND /* nand_io7_0 */
+ 0x0e4 MODE_NAND /* nand_io8_0 */
+ 0x0e8 MODE_NAND /* nand_io9_0 */
+ 0x0ec MODE_NAND /* nand_io10_0 */
+ 0x0f0 MODE_NAND /* nand_io11_0 */
+ 0x0f4 MODE_NAND /* nand_io12_0 */
+ 0x0f8 MODE_NAND /* nand_io13_0 */
+ 0x0fc MODE_NAND /* nand_io14_0 */
+ 0x100 MODE_NAND /* nand_io15_0 */
+ 0x104 MODE_NAND /* nand_ale_0 */
+ 0x108 MODE_NAND /* nand_cle_0 */
+ >;
+ };
+
+ pwm0_pins: pinmux_pwm_0 {
+ pinctrl-single,pins = <
+ 0x10c MODE_NITRO
+ >;
+ };
+
+ pwm1_pins: pinmux_pwm_1 {
+ pinctrl-single,pins = <
+ 0x110 MODE_NITRO
+ >;
+ };
+
+ pwm2_pins: pinmux_pwm_2 {
+ pinctrl-single,pins = <
+ 0x114 MODE_NITRO
+ >;
+ };
+
+ pwm3_pins: pinmux_pwm_3 {
+ pinctrl-single,pins = <
+ 0x118 MODE_NITRO
+ >;
+ };
+
+ dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ pinctrl-single,pins = <
+ 0x11c MODE_NITRO /* dbu_rxd */
+ 0x120 MODE_NITRO /* dbu_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_sin_nand {
+ pinctrl-single,pins = <
+ 0x11c MODE_NAND /* uart1_sin */
+ 0x120 MODE_NAND /* uart1_out */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_sin {
+ pinctrl-single,pins = <
+ 0x124 MODE_NITRO /* uart2_sin */
+ 0x128 MODE_NITRO /* uart2_out */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_sin {
+ pinctrl-single,pins = <
+ 0x12c MODE_NITRO /* uart3_sin */
+ 0x130 MODE_NITRO /* uart3_out */
+ >;
+ };
+
+ i2s_pins: pinmux_i2s_bitclk {
+ pinctrl-single,pins = <
+ 0x134 MODE_NITRO /* i2s_bitclk */
+ 0x138 MODE_NITRO /* i2s_sdout */
+ 0x13c MODE_NITRO /* i2s_sdin */
+ 0x140 MODE_NITRO /* i2s_ws */
+ 0x144 MODE_NITRO /* i2s_mclk */
+ 0x148 MODE_NITRO /* i2s_spdif_out */
+ >;
+ };
+
+ qspi_pins: pinumx_qspi_hold_n {
+ pinctrl-single,pins = <
+ 0x14c MODE_NAND /* qspi_hold_n */
+ 0x150 MODE_NAND /* qspi_wp_n */
+ 0x154 MODE_NAND /* qspi_sck */
+ 0x158 MODE_NAND /* qspi_cs_n */
+ 0x15c MODE_NAND /* qspi_mosi */
+ 0x160 MODE_NAND /* qspi_miso */
+ >;
+ };
+
+ mdio_pins: pinumx_ext_mdio {
+ pinctrl-single,pins = <
+ 0x164 MODE_NITRO /* ext_mdio */
+ 0x168 MODE_NITRO /* ext_mdc */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_sda {
+ pinctrl-single,pins = <
+ 0x16c MODE_NITRO /* i2c0_sda */
+ 0x170 MODE_NITRO /* i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_sda {
+ pinctrl-single,pins = <
+ 0x174 MODE_NITRO /* i2c1_sda */
+ 0x178 MODE_NITRO /* i2c1_scl */
+ >;
+ };
+
+ sdio0_pins: pinmux_sdio0_cd_l {
+ pinctrl-single,pins = <
+ 0x17c MODE_NITRO /* sdio0_cd_l */
+ 0x180 MODE_NITRO /* sdio0_clk_sdcard */
+ 0x184 MODE_NITRO /* sdio0_data0 */
+ 0x188 MODE_NITRO /* sdio0_data1 */
+ 0x18c MODE_NITRO /* sdio0_data2 */
+ 0x190 MODE_NITRO /* sdio0_data3 */
+ 0x194 MODE_NITRO /* sdio0_data4 */
+ 0x198 MODE_NITRO /* sdio0_data5 */
+ 0x19c MODE_NITRO /* sdio0_data6 */
+ 0x1a0 MODE_NITRO /* sdio0_data7 */
+ 0x1a4 MODE_NITRO /* sdio0_cmd */
+ 0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+ 0x1ac MODE_NITRO /* sdio0_led_on */
+ 0x1b0 MODE_NITRO /* sdio0_wp */
+ >;
+ };
+
+ sdio1_pins: pinmux_sdio1_cd_l {
+ pinctrl-single,pins = <
+ 0x1b4 MODE_NITRO /* sdio1_cd_l */
+ 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+ 0x1bc MODE_NITRO /* sdio1_data0 */
+ 0x1c0 MODE_NITRO /* sdio1_data1 */
+ 0x1c4 MODE_NITRO /* sdio1_data2 */
+ 0x1c8 MODE_NITRO /* sdio1_data3 */
+ 0x1cc MODE_NITRO /* sdio1_data4 */
+ 0x1d0 MODE_NITRO /* sdio1_data5 */
+ 0x1d4 MODE_NITRO /* sdio1_data6 */
+ 0x1d8 MODE_NITRO /* sdio1_data7 */
+ 0x1dc MODE_NITRO /* sdio1_cmd */
+ 0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+ 0x1e4 MODE_NITRO /* sdio1_led_on */
+ 0x1e8 MODE_NITRO /* sdio1_wp */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_sck_nand {
+ pinctrl-single,pins = <
+ 0x1ec MODE_NITRO /* spi0_sck */
+ 0x1f0 MODE_NITRO /* spi0_rxd */
+ 0x1f4 MODE_NITRO /* spi0_fss */
+ 0x1f8 MODE_NITRO /* spi0_txd */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_sck_nand {
+ pinctrl-single,pins = <
+ 0x1fc MODE_NITRO /* spi1_sck */
+ 0x200 MODE_NITRO /* spi1_rxd */
+ 0x204 MODE_NITRO /* spi1_fss */
+ 0x208 MODE_NITRO /* spi1_txd */
+ >;
+ };
+
+ nuart_pins: pinmux_uart0_sin_nitro {
+ pinctrl-single,pins = <
+ 0x20c MODE_NITRO /* nuart_rxd */
+ 0x210 MODE_NITRO /* nuart_txd */
+ >;
+ };
+
+ uart0_pins: pinumux_uart0_sin_nand {
+ pinctrl-single,pins = <
+ 0x20c MODE_NAND /* uart0_sin */
+ 0x210 MODE_NAND /* uart0_out */
+ 0x214 MODE_NAND /* uart0_rts */
+ 0x218 MODE_NAND /* uart0_cts */
+ 0x21c MODE_NAND /* uart0_dtr */
+ 0x220 MODE_NAND /* uart0_dcd */
+ 0x224 MODE_NAND /* uart0_dsr */
+ 0x228 MODE_NAND /* uart0_ri */
+ >;
+ };
+
+ drdu2_pins: pinmux_drdu2_overcurrent {
+ pinctrl-single,pins = <
+ 0x22c MODE_NITRO /* drdu2_overcurrent */
+ 0x230 MODE_NITRO /* drdu2_vbus_ppc */
+ 0x234 MODE_NITRO /* drdu2_vbus_present */
+ 0x238 MODE_NITRO /* drdu2_id */
+ >;
+ };
+
+ drdu3_pins: pinmux_drdu3_overcurrent {
+ pinctrl-single,pins = <
+ 0x23c MODE_NITRO /* drdu3_overcurrent */
+ 0x240 MODE_NITRO /* drdu3_vbus_ppc */
+ 0x244 MODE_NITRO /* drdu3_vbus_present */
+ 0x248 MODE_NITRO /* drdu3_id */
+ >;
+ };
+
+ usb3h_pins: pinmux_usb3h_overcurrent {
+ pinctrl-single,pins = <
+ 0x24c MODE_NITRO /* usb3h_overcurrent */
+ 0x250 MODE_NITRO /* usb3h_vbus_ppc */
+ >;
+ };
+ };
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,stingray";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ CLUSTER0_L2: l2-cache@000 {
+ compatible = "cache";
+ };
+
+ CLUSTER1_L2: l2-cache@100 {
+ compatible = "cache";
+ };
+
+ CLUSTER2_L2: l2-cache@200 {
+ compatible = "cache";
+ };
+
+ CLUSTER3_L2: l2-cache@300 {
+ compatible = "cache";
+ };
+ };
+
+ memory: memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ scr {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x61000000 0x05000000>;
+
+ gic: interrupt-controller@02c00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x02c00000 0x010000>, /* GICD */
+ <0x02e00000 0x600000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic_its: gic-its@63c20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x02c20000 0x10000>;
+ };
+ };
+
+ smmu: mmu@03000000 {
+ compatible = "arm,mmu-500";
+ reg = <0x03000000 0x80000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <2>;
+ };
+ };
+
+ crmu: crmu {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x66400000 0x100000>;
+
+ #include "stingray-clock.dtsi"
+
+ gpio_crmu: gpio@00024800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x00024800 0x4c>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ hsls {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+ #include "stingray-pinctrl.dtsi"
+
+ pwm: pwm@00010000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x00010000 0x1000>;
+ clocks = <&crmu_ref25m>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@000b0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@000c0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x000c0000 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ gpio_hsls: gpio@000d0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x000d0000 0x864>;
+ ngpios = <151>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinmux 0 0 16>,
+ <&pinmux 16 71 2>,
+ <&pinmux 18 131 8>,
+ <&pinmux 26 83 6>,
+ <&pinmux 32 123 4>,
+ <&pinmux 36 43 24>,
+ <&pinmux 60 89 2>,
+ <&pinmux 62 73 4>,
+ <&pinmux 66 95 28>,
+ <&pinmux 94 127 4>,
+ <&pinmux 98 139 10>,
+ <&pinmux 108 16 27>,
+ <&pinmux 135 77 6>,
+ <&pinmux 141 67 4>,
+ <&pinmux 145 149 6>,
+ <&pinmux 151 91 4>;
+ };
+
+ i2c1: i2c@000e0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000e0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ uart0: uart@00100000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00100000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: uart@00110000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00110000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: uart@00120000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00120000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: uart@00130000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00130000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@00180000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00180000 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@00190000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00190000 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hwrng: hwrng@00220000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x00220000 0x28>;
+ };
+
+ dma0: dma@00310000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x00310000 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&hsls_div2_clk>;
+ clock-names = "apb_pclk";
+ iommus = <&smmu 0x6000 0x0000>;
+ };
+
+ nand: nand@00360000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x00360000 0x600>,
+ <0x0050a408 0x600>,
+ <0x00360f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcm,nand-has-wp;
+ status = "disabled";
+ };
+
+ sdio0: sdhci@003f1000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f1000 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio0_clk>;
+ iommus = <&smmu 0x6002 0x0000>;
+ status = "disabled";
+ };
+
+ sdio1: sdhci@003f2000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f2000 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio1_clk>;
+ iommus = <&smmu 0x6003 0x0000>;
+ status = "disabled";
+ };
+ };
+};
vci-supply = <&ldo28_reg>;
reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
- te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
};
};
/*
* Device Tree file for Freescale LS1012A Freedom Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
/*
* Device Tree file for Freescale LS1012A QDS Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
status = "okay";
};
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
/*
* Device Tree file for Freescale LS1012A RDB Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
status = "okay";
};
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
/*
* Device Tree Include file for Freescale Layerscape-1012A family SoC.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ clock-frequency = <125000000>;
clock-output-names = "sysclk";
};
+ coreclk: coreclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "coreclk";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
#size-cells = <2>;
ranges;
+ esdhc0: esdhc@1560000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <0 62 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1012a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
};
+ esdhc1: esdhc@1580000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1580000 0x0 0x10000>;
+ interrupts = <0 65 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ broken-cd;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
"fsl,sec-v4.0";
compatible = "fsl,ls1012a-clockgen";
reg = <0x0 0x1ee1000 0x0 0x1000>;
#clock-cells = <2>;
- clocks = <&sysclk>;
+ clocks = <&sysclk &coreclk>;
+ clock-names = "sysclk", "coreclk";
};
tmu: tmu@1f00000 {
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+};
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
reg = <0>;
};
};
+
+#include "fsl-ls1043-post.dtsi"
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
reg = <0x4c>;
};
eeprom@52 {
- compatible = "at24,24c512";
+ compatible = "atmel,24c512";
reg = <0x52>;
};
eeprom@53 {
- compatible = "at24,24c512";
+ compatible = "atmel,24c512";
reg = <0x53>;
};
rtc@68 {
&duart1 {
status = "okay";
};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy1>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy2>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy3>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy4>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr105_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ qsgmii_phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ qsgmii_phy2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ qsgmii_phy3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ qsgmii_phy4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr105_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 132 4>;
+ reg = <0x1>;
+ };
+ };
+};
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
*/
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1043a";
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* DRAM space 1, size: 2GiB DRAM */
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ no-map;
+ };
+
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
interrupts = <1 9 0xf08>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <0 43 0x4>;
};
};
};
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x0 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x0 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
dspi0: dspi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
};
};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+};
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*
reg = <0>;
};
};
+
+#include "fsl-ls1046-post.dtsi"
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
status = "okay";
};
+&esdhc {
+ mmc-hs200-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+};
+
&i2c0 {
status = "okay";
reg = <1>;
};
};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr106_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* 10GEC2 */
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sgmii_phy1: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ sgmii_phy2: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr106_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 131 4>;
+ reg = <0x0>;
+ };
+ };
+};
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
aliases {
crypto = &crypto;
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
};
cpus {
IRQ_TYPE_LEVEL_LOW)>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
};
esdhc: esdhc@1560000 {
- compatible = "fsl,esdhc";
+ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <0>;
+ clocks = <&clockgen 2 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
};
};
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x0 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x0 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb1: usb@3000000 {
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb2: usb@3100000 {
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 {
clocks = <&clockgen 4 1>;
};
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x800000>;
+ alignment = <0 0x800000>;
+ no-map;
+ };
+
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
};
};
+&ifc {
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ fpga: board-control@3,0 {
+ compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
};
};
+&ifc {
+ ranges = <0 0 0x5 0x30000000 0x00010000
+ 2 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ fpga: board-control@2,0 {
+ compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1088a";
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ #cooling-cells = <2>;
};
cpu5: cpu@101 {
clocks = <&sysclk>;
};
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration =
+ /* Calibration data group 1 */
+ <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+ /* Calibration data group 2 */
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+ /* Calibration data group 3 */
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+ /* Calibration data group 4 */
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
little-endian;
#address-cells = <2>;
#size-cells = <1>;
-
- ranges = <0 0 0x5 0x80000000 0x08000000
- 2 0 0x5 0x30000000 0x00010000
- 3 0 0x5 0x20000000 0x00010000>;
status = "disabled";
};
status = "disabled";
};
+ esdhc: esdhc@2140000 {
+ compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
- compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ compatible = "fsl,ls1088a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
+ dma-coherent;
status = "disabled";
};
};
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
- * Copyright (C) 2015-17, Freescale Semiconductor
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
/*
* Device Tree file for Freescale LS2080a software Simulator model
*
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2014-2016, Freescale Semiconductor
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
/*
* Device Tree file for Freescale LS2088A QDS Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
/*
* Device Tree file for Freescale LS2088A RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
/*
* Device Tree Include file for Freescale Layerscape-2088A family SoC.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
/*
* Device Tree file for Freescale LS2080A QDS Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
*/
&esdhc {
+ mmc-hs200-1_8v;
status = "okay";
};
/*
* Device Tree file for Freescale LS2080A RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2016-2017, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clock-frequency = <0>; /* Updated by bootloader */
+ clocks = <&clockgen 4 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
--- /dev/null
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&bportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ bman-portal@0 {
+ /*
+ * bootloader fix-ups are expected to provide the
+ * "fsl,bman-portal-<hardware revision>" compatible
+ */
+ compatible = "fsl,bman-portal";
+ reg = <0x0 0x4000>, <0x4000000 0x4000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@10000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@20000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@30000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@40000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@50000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@60000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@70000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@80000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x90000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb0000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ pcsphy-handle = <&pcsphy6>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x11: port@91000 {
+ cell-index = <0x11>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x91000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x31: port@b1000 {
+ cell-index = <0x31>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f2000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+ pcsphy-handle = <&pcsphy7>;
+ };
+
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf3000 0x1000>;
+
+ pcsphy7: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman0_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy2>;
+ };
+
+ mdio@e5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe5000 0x1000>;
+
+ pcsphy2: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman0_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy3>;
+ };
+
+ mdio@e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe7000 0x1000>;
+
+ pcsphy3: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman0_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy4>;
+ };
+
+ mdio@e9000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe9000 0x1000>;
+
+ pcsphy4: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0d: port@8d000 {
+ cell-index = <0xd>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8d000 0x1000>;
+ };
+
+ fman0_tx_0x2d: port@ad000 {
+ cell-index = <0x2d>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xad000 0x1000>;
+ };
+
+ ethernet@ea000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-memac";
+ reg = <0xea000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy5>;
+ };
+
+ mdio@eb000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xeb000 0x1000>;
+
+ pcsphy5: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman0: fman@1a00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0x0 0x0 0x1a00000 0x100000>;
+ reg = <0x0 0x1a00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x60000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman0_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman0_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&qportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ /*
+ * bootloader fix-ups are expected to provide the
+ * "fsl,bman-portal-<hardware revision>" compatible
+ */
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x4000000 0x4000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <0>;
+ };
+
+ qportal1: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <1>;
+ };
+
+ qportal2: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <2>;
+ };
+
+ qportal3: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <3>;
+ };
+
+ qportal4: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <4>;
+ };
+
+ qportal5: qman-portal@50000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <5>;
+ };
+
+ qportal6: qman-portal@60000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <6>;
+ };
+
+ qportal7: qman-portal@70000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <7>;
+ };
+
+ qportal8: qman-portal@80000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <8>;
+ };
+};
#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "HiKey960";
- compatible = "hisilicon,hi3660";
+ compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
aliases {
- serial5 = &uart5; /* console UART */
+ mshc1 = &dwmmc1;
+ mshc2 = &dwmmc2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
};
chosen {
- stdout-path = "serial5:115200n8";
+ stdout-path = "serial6:115200n8";
};
memory@0 {
/* rewrite this at bootloader */
reg = <0x0 0x0 0x0 0x0>;
};
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+ power {
+ wakeup-source;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "user_led1";
+ /* gpio_150_user_led1 */
+ gpios = <&gpio18 6 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "user_led2";
+ /* gpio_151_user_led2 */
+ gpios = <&gpio18 7 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "user_led3";
+ /* gpio_189_user_led3 */
+ gpios = <&gpio23 5 0>;
+ default-state = "off";
+ };
+
+ user_led4 {
+ label = "user_led4";
+ /* gpio_190_user_led4 */
+ gpios = <&gpio23 6 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ wlan_active_led {
+ label = "wifi_active";
+ /* gpio_205_wifi_active */
+ gpios = <&gpio25 5 0>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "bt_active";
+ gpios = <&gpio25 7 0>;
+ /* gpio_207_user_led1 */
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ pmic: pmic@fff34000 {
+ compatible = "hisilicon,hi6421v530-pmic";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "VOUT3_1V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "VOUT9_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo11: LDO11 { /* Low Speed Connector */
+ regulator-name = "VOUT11_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo15: LDO15 { /* UFS VCC */
+ regulator-name = "VOUT15_3V0";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo16: LDO16 { /* SD VDD */
+ regulator-name = "VOUT16_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+ };
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&i2c0 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ adv7533: adv7533@39 {
+ status = "ok";
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+ };
+};
+
+&i2c7 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&uart3 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+ max-speed = <921600>;
+ };
};
-&uart5 {
+&uart6 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
status = "okay";
};
+
+&spi2 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&spi3 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&dwmmc1 {
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
+ status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+ broken-cd;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ ti,non-removable;
+ non-removable;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3660-clock.h>
/ {
compatible = "hisilicon,hi3660";
#size-cells = <2>;
ranges;
- fixed_uart5: fixed_19_2M {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "fixed:uart5";
+ crg_ctrl: crg_ctrl@fff35000 {
+ compatible = "hisilicon,hi3660-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
};
- uart5: uart@fdf05000 {
+ crg_rst: crg_rst_controller {
+ compatible = "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&crg_ctrl>;
+ };
+
+
+ pctrl: pctrl@e8a09000 {
+ compatible = "hisilicon,hi3660-pctrl", "syscon";
+ reg = <0x0 0xe8a09000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ pmuctrl: crg_ctrl@fff34000 {
+ compatible = "hisilicon,hi3660-pmuctrl", "syscon";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sctrl: sctrl@fff0a000 {
+ compatible = "hisilicon,hi3660-sctrl", "syscon";
+ reg = <0x0 0xfff0a000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iomcu: iomcu@ffd7e000 {
+ compatible = "hisilicon,hi3660-iomcu", "syscon";
+ reg = <0x0 0xffd7e000 0x0 0x1000>;
+ #clock-cells = <1>;
+
+ };
+
+ iomcu_rst: reset {
+ compatible = "hisilicon,hi3660-reset";
+ hisi,rst-syscon = <&iomcu>;
+ #reset-cells = <2>;
+ };
+
+ dual_timer0: timer@fff14000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x0 0xfff14000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ i2c0: i2c@ffd71000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd71000 0x0 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+ resets = <&iomcu_rst 0x20 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffd72000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd72000 0x0 0x1000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>;
+ resets = <&iomcu_rst 0x20 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fdf0c000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>;
+ resets = <&crg_rst 0x78 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@fdf0b000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>;
+ resets = <&crg_rst 0x60 14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>;
+ status = "disabled";
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ status = "disabled";
+ };
+
+ uart1: serial@fdf00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+ <&crg_ctrl HI3660_CLK_GATE_UART1>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ status = "disabled";
+ };
+
+ uart2: serial@fdf03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ status = "disabled";
+ };
+
+ uart3: serial@ffd74000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xffd74000 0x0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ status = "disabled";
+ };
+
+ uart4: serial@fdf01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+ <&crg_ctrl HI3660_CLK_GATE_UART4>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ status = "disabled";
+ };
+
+ uart5: serial@fdf05000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&fixed_uart5 &fixed_uart5>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
+ <&crg_ctrl HI3660_CLK_GATE_UART5>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+ status = "disabled";
+ };
+
+ uart6: serial@fff32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_UART6>,
+ <&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@fff04000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x0 0Xfff04000 0x0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio0: gpio@e8a0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0b000 0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 0 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e8a0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0c000 0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 7 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e8a0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0d000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 14 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e8a0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0e000 0 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 22 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e8a0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0f000 0 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 30 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio@e8a10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a10000 0 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 38 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio@e8a11000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a11000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 46 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio@e8a12000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a12000 0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 54 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio@e8a13000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a13000 0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 62 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio@e8a14000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a14000 0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 70 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio@e8a15000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a15000 0 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 78 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio@e8a16000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a16000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 86 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio@e8a17000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a17000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio@e8a18000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a18000 0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 102 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio@e8a19000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a19000 0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 110 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio@e8a1a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1a000 0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 118 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio@e8a1b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1b000 0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio@e8a1c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1c000 0 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio@ff3b4000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xff3b4000 0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx2 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio@ff3b5000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xff3b5000 0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx2 0 8 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio@e8a1f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1f000 0 0x1000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 0 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio@e8a20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a20000 0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&pmx3 0 0 6>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio22: gpio@fff0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0b000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO176 */
+ gpio-ranges = <&pmx4 2 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio23: gpio@fff0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0c000 0 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO184 */
+ gpio-ranges = <&pmx4 0 6 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio24: gpio@fff0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0d000 0 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO192 */
+ gpio-ranges = <&pmx4 0 13 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio25: gpio@fff0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0e000 0 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO200 */
+ gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio26: gpio@fff0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0f000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO208 */
+ gpio-ranges = <&pmx4 0 28 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio27: gpio@fff10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff10000 0 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO216 */
+ gpio-ranges = <&pmx4 0 36 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio28: gpio@fff1d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff1d000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ spi2: spi@ffd68000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xffd68000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio27 2 0>;
+ status = "disabled";
+ };
+
+ spi3: spi@ff3b3000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xff3b3000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio18 5 0>;
+ status = "disabled";
+ };
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin960-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>,
+ <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>,
+ <0x0 0xf5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000
+ 0x0 0xf6000000
+ 0x0 0x02000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1
+ &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 2
+ &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 3
+ &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 4
+ &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys",
+ "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ };
+
+ /* SD */
+ dwmmc1: dwmmc1@ff37f000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cd-inverted;
+ compatible = "hisilicon,hi3660-dw-mshc";
+ num-slots = <1>;
+ bus-width = <0x4>;
+ disable-wp;
+ cap-sd-highspeed;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ reg = <0x0 0xff37f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
+ <&crg_ctrl HI3660_HCLK_GATE_SD>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 18>;
+ cd-gpios = <&gpio25 3 0>;
+ hisilicon,peripheral-syscon = <&sctrl>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "disabled";
+
+ slot@0 {
+ reg = <0x0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+ /* SDIO */
+ dwmmc2: dwmmc2@ff3ff000 {
+ compatible = "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xff3ff000 0x0 0x1000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ num-slots = <1>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
+ <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
+ clock-names = "ciu", "biu";
+ resets = <&crg_rst 0x94 20>;
+ card-detect-delay = <200>;
+ supports-highspeed;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
status = "disabled";
};
};
};
};
+ reg_sys_5v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "SYS_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_3v3: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ vin-supply = <®_sys_5v>;
+ };
+
+ reg_5v_hub: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_HUB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio0 7 0>;
+ regulator-always-on;
+ vin-supply = <®_sys_5v>;
+ };
+
+ wl1835_pwrseq: wl1835-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ /* WLAN_EN GPIO */
+ reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ clocks = <&pmic>;
+ clock-names = "ext_clock";
+ power-off-delay-us = <10>;
+ };
+
soc {
spi0: spi@f7106000 {
status = "ok";
/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+ dwmmc_0: dwmmc0@f723d000 {
+ cap-mmc-highspeed;
+ non-removable;
+ bus-width = <0x8>;
+ vmmc-supply = <&ldo19>;
+ };
+
+ dwmmc_1: dwmmc1@f723e000 {
+ card-detect-delay = <200>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ vqmmc-supply = <&ldo7>;
+ vmmc-supply = <&ldo10>;
+ bus-width = <0x4>;
+ disable-wp;
+ cd-gpios = <&gpio1 0 1>;
+ };
+
dwmmc_2: dwmmc2@f723f000 {
- ti,non-removable;
+ bus-width = <0x4>;
non-removable;
- /* WL_EN */
- vmmc-supply = <&wlan_en_reg>;
+ vmmc-supply = <®_vdd_3v3>;
+ mmc-pwrseq = <&wl1835_pwrseq>;
#address-cells = <0x1>;
#size-cells = <0x0>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
};
};
-
- wlan_en_reg: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- /* WLAN_EN GPIO */
- gpio = <&gpio0 5 0>;
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
};
leds {
pmic: pmic@f8000000 {
compatible = "hisilicon,hi655x-pmic";
reg = <0x0 0xf8000000 0x0 0x1000>;
+ #clock-cells = <0>;
interrupt-controller;
#interrupt-cells = <2>;
pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
method = "smc";
};
};
+
+ sound_card {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_port0>;
+ };
};
&uart2 {
interrupts = <1 2>;
pd-gpio = <&gpio0 4 0>;
adi,dsi-lanes = <4>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s0_cpu_endpoint>;
+ };
+ };
+ };
+ };
+};
+
+&i2s0 {
- port {
- adv7533_in: endpoint {
- remote-endpoint = <&dsi_out0>;
+ ports {
+ i2s0_port0: port@0 {
+ i2s0_cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "i2s";
};
};
};
status = "disabled";
};
+ dma0: dma@f7370000 {
+ compatible = "hisilicon,k3-dma-1.0";
+ reg = <0x0 0xf7370000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ dma-requests = <32>;
+ interrupts = <0 84 4>;
+ clocks = <&sys_ctrl HI6220_EDMAC_ACLK>;
+ dma-no-cci;
+ dma-type = "hi6220_dma";
+ status = "ok";
+ };
+
dual_timer0: timer@f8008000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xf8008000 0x0 0x1000>;
status = "disabled";
};
- fixed_5v_hub: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed_5v_hub";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- gpio = <&gpio0 7 0>;
- regulator-always-on;
- };
-
usb_phy: usbphy {
compatible = "hisilicon,hi6220-usb-phy";
#phy-cells = <0>;
- phy-supply = <&fixed_5v_hub>;
+ phy-supply = <®_5v_hub>;
hisilicon,peripheral-syscon = <&sys_ctrl>;
};
dwmmc_0: dwmmc0@f723d000 {
compatible = "hisilicon,hi6220-dw-mshc";
- num-slots = <0x1>;
- cap-mmc-highspeed;
- non-removable;
reg = <0x0 0xf723d000 0x0 0x1000>;
interrupts = <0x0 0x48 0x4>;
clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
reset-names = "reset";
- bus-width = <0x8>;
- vmmc-supply = <&ldo19>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
&emmc_cfg_func &emmc_rst_cfg_func>;
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
- num-slots = <0x1>;
- card-detect-delay = <200>;
hisilicon,peripheral-syscon = <&ao_ctrl>;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
reg = <0x0 0xf723e000 0x0 0x1000>;
interrupts = <0x0 0x49 0x4>;
#address-cells = <0x1>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
reset-names = "reset";
- vqmmc-supply = <&ldo7>;
- vmmc-supply = <&ldo10>;
- bus-width = <0x4>;
- disable-wp;
- cd-gpios = <&gpio1 0 1>;
pinctrl-names = "default", "idle";
pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
dwmmc_2: dwmmc2@f723f000 {
compatible = "hisilicon,hi6220-dw-mshc";
- num-slots = <0x1>;
reg = <0x0 0xf723f000 0x0 0x1000>;
interrupts = <0x0 0x4a 0x4>;
clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
reset-names = "reset";
- bus-width = <0x4>;
- broken-cd;
pinctrl-names = "default", "idle";
pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
#thermal-sensor-cells = <1>;
};
+ i2s0: i2s@f7118000{
+ compatible = "hisilicon,hi6210-i2s";
+ reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
+ clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
+ <&sys_ctrl HI6220_BBPPLL0_DIV>;
+ clock-names = "dacodec", "i2s-base";
+ dmas = <&dma0 15 &dma0 14>;
+ dma-names = "rx", "tx";
+ hisilicon,sysctrl-syscon = <&sys_ctrl>;
+ #sound-dai-cells = <1>;
+ };
+
thermal-zones {
cls0: cls0 {
&range 0 7 0
&range 8 116 0>;
+ pmu_pmx_func: pmu_pmx_func {
+ pinctrl-single,pins = <
+ 0x008 MUX_M1 /* PMU1_SSI */
+ 0x00c MUX_M1 /* PMU2_SSI */
+ 0x010 MUX_M1 /* PMU_CLKOUT */
+ 0x100 MUX_M1 /* PMU_HKADC_SSI */
+ >;
+ };
+
+ csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x044 MUX_M0 /* CSI0_PWD_N */
+ >;
+ };
+
+ csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x04c MUX_M0 /* CSI1_PWD_N */
+ >;
+ };
+
isp0_pmx_func: isp0_pmx_func {
pinctrl-single,pins = <
0x058 MUX_M1 /* ISP_CLK0 */
>;
};
+ pwr_key_pmx_func: pwr_key_pmx_func {
+ pinctrl-single,pins = <
+ 0x080 MUX_M0 /* GPIO_034 */
+ >;
+ };
+
i2c3_pmx_func: i2c3_pmx_func {
pinctrl-single,pins = <
0x02c MUX_M1 /* I2C3_SCL */
>;
};
- spi1_pmx_func: spi1_pmx_func {
- pinctrl-single,pins = <
- 0x034 MUX_M1 /* SPI1_CLK */
- 0x038 MUX_M1 /* SPI1_DI */
- 0x03c MUX_M1 /* SPI1_DO */
- 0x040 MUX_M1 /* SPI1_CS_N */
- >;
- };
-
uart0_pmx_func: uart0_pmx_func {
pinctrl-single,pins = <
0x0cc MUX_M2 /* UART0_RXD */
0x0d0 MUX_M2 /* UART0_TXD */
- 0x0d4 MUX_M2 /* UART0_RXD_M */
- 0x0d8 MUX_M2 /* UART0_TXD_M */
>;
};
0x0d8 MUX_M1 /* UART6_TXD */
>;
};
+
+ cam0_rst_pmx_func: cam0_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c8 MUX_M0 /* CAM0_RST */
+ >;
+ };
+
+ cam1_rst_pmx_func: cam1_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x124 MUX_M0 /* CAM1_RST */
+ >;
+ };
};
/* [IOMG_MMC0_000, IOMG_MMC0_005] */
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 12 0>;
+ ufs_pmx_func: ufs_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* UFS_REF_CLK */
+ 0x004 MUX_M1 /* UFS_RST_N */
+ >;
+ };
+
spi3_pmx_func: spi3_pmx_func {
pinctrl-single,pins = <
0x008 MUX_M1 /* SPI3_CLK */
>;
};
- i2c2_pmx_func: i2c2_pmx_func {
+ i2c7_pmx_func: i2c7_pmx_func {
pinctrl-single,pins = <
- 0x024 MUX_M1 /* I2C2_SCL */
- 0x028 MUX_M1 /* I2C2_SDA */
+ 0x024 MUX_M3 /* I2C7_SCL */
+ 0x028 MUX_M3 /* I2C7_SDA */
>;
};
- i2c7_pmx_func: i2c7_pmx_func {
+ pcie_pmx_func: pcie_pmx_func {
pinctrl-single,pins = <
- 0x024 MUX_M3 /* I2C7_SCL */
- 0x028 MUX_M3 /* I2C7_SDA */
+ 0x084 MUX_M1 /* PCIE_CLKREQ_N */
+ 0x088 MUX_M1 /* PCIE_WAKE_N */
>;
};
>;
};
- spi4_pmx_func: spi4_pmx_func {
- pinctrl-single,pins = <
- 0x08c MUX_M4 /* SPI4_CLK */
- 0x090 MUX_M4 /* SPI4_DI */
- 0x094 MUX_M4 /* SPI4_DO */
- 0x098 MUX_M4 /* SPI4_CS0_N */
- >;
- };
-
i2s0_pmx_func: i2s0_pmx_func {
pinctrl-single,pins = <
0x034 MUX_M1 /* I2S0_DI */
};
};
- pmx5: pinmux@ff3fd800 {
+ pmx5: pinmux@e896c800 {
compatible = "pinconf-single";
- reg = <0x0 0xff3fd800 0x0 0x18>;
+ reg = <0x0 0xe896c800 0x0 0x200>;
#pinctrl-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-single,register-width = <32>;
+ pinctrl-single,register-width = <0x20>;
- sdio_clk_cfg_func: sdio_clk_cfg_func {
+ pmu_cfg_func: pmu_cfg_func {
pinctrl-single,pins = <
- 0x000 0x0 /* SDIO_CLK */
+ 0x010 0x0 /* PMU1_SSI */
+ 0x014 0x0 /* PMU2_SSI */
+ 0x018 0x0 /* PMU_CLKOUT */
+ 0x10c 0x0 /* PMU_HKADC_SSI */
>;
pinctrl-single,bias-pulldown = <
PULL_DIS
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_32MA
- DRIVE6_MASK
+ DRIVE7_06MA DRIVE6_MASK
>;
};
- sdio_cfg_func: sdio_cfg_func {
+ i2c3_cfg_func: i2c3_cfg_func {
pinctrl-single,pins = <
- 0x004 0x0 /* SDIO_CMD */
- 0x008 0x0 /* SDIO_DATA0 */
- 0x00c 0x0 /* SDIO_DATA1 */
- 0x010 0x0 /* SDIO_DATA2 */
- 0x014 0x0 /* SDIO_DATA3 */
+ 0x038 0x0 /* I2C3_SCL */
+ 0x03c 0x0 /* I2C3_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x050 0x0 /* CSI0_PWD_N */
>;
pinctrl-single,bias-pulldown = <
PULL_DIS
PULL_DOWN
>;
pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x058 0x0 /* CSI1_PWD_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
PULL_UP
PULL_DIS
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_19MA
- DRIVE6_MASK
+ DRIVE7_04MA DRIVE6_MASK
>;
};
- };
- pmx6: pinmux@ff37e800 {
- compatible = "pinconf-single";
- reg = <0x0 0xff37e800 0x0 0x18>;
- #pinctrl-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-single,register-width = <32>;
+ isp0_cfg_func: isp0_cfg_func {
+ pinctrl-single,pins = <
+ 0x064 0x0 /* ISP_CLK0 */
+ 0x070 0x0 /* ISP_SCL0 */
+ 0x074 0x0 /* ISP_SDA0 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK>;
+ };
- sd_clk_cfg_func: sd_clk_cfg_func {
+ isp1_cfg_func: isp1_cfg_func {
pinctrl-single,pins = <
- 0x000 0x0 /* SD_CLK */
+ 0x068 0x0 /* ISP_CLK1 */
+ 0x078 0x0 /* ISP_SCL1 */
+ 0x07c 0x0 /* ISP_SDA1 */
>;
pinctrl-single,bias-pulldown = <
PULL_DIS
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_32MA
- DRIVE6_MASK
+ DRIVE7_04MA DRIVE6_MASK
>;
};
- sd_cfg_func: sd_cfg_func {
+ pwr_key_cfg_func: pwr_key_cfg_func {
pinctrl-single,pins = <
- 0x004 0x0 /* SD_CMD */
- 0x008 0x0 /* SD_DATA0 */
- 0x00c 0x0 /* SD_DATA1 */
- 0x010 0x0 /* SD_DATA2 */
- 0x014 0x0 /* SD_DATA3 */
+ 0x08c 0x0 /* GPIO_034 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart1_cfg_func: uart1_cfg_func {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* UART1_RXD */
+ 0x0b8 0x0 /* UART1_TXD */
+ 0x0bc 0x0 /* UART1_CTS_N */
+ 0x0c0 0x0 /* UART1_RTS_N */
>;
pinctrl-single,bias-pulldown = <
PULL_DIS
PULL_DOWN
>;
pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c8 0x0 /* UART2_CTS_N */
+ 0x0cc 0x0 /* UART2_RTS_N */
+ 0x0d0 0x0 /* UART2_TXD */
+ 0x0d4 0x0 /* UART2_RXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
PULL_UP
PULL_DIS
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_19MA
- DRIVE6_MASK
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart5_cfg_func: uart5_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c8 0x0 /* UART5_RXD */
+ 0x0cc 0x0 /* UART5_TXD */
+ 0x0d0 0x0 /* UART5_CTS_N */
+ 0x0d4 0x0 /* UART5_RTS_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ cam0_rst_cfg_func: cam0_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* CAM0_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d8 0x0 /* UART0_RXD */
+ 0x0dc 0x0 /* UART0_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart6_cfg_func: uart6_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d8 0x0 /* UART6_CTS_N */
+ 0x0dc 0x0 /* UART6_RTS_N */
+ 0x0e0 0x0 /* UART6_RXD */
+ 0x0e4 0x0 /* UART6_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x0e8 0x0 /* UART3_CTS_N */
+ 0x0ec 0x0 /* UART3_RTS_N */
+ 0x0f0 0x0 /* UART3_RXD */
+ 0x0f4 0x0 /* UART3_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART4_CTS_N */
+ 0x0fc 0x0 /* UART4_RTS_N */
+ 0x100 0x0 /* UART4_RXD */
+ 0x104 0x0 /* UART4_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ cam1_rst_cfg_func: cam1_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x130 0x0 /* CAM1_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx6: pinmux@ff3b6800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff3b6800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ ufs_cfg_func: ufs_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* UFS_REF_CLK */
+ 0x004 0x0 /* UFS_RST_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_08MA DRIVE6_MASK
+ >;
+ };
+
+ spi3_cfg_func: spi3_cfg_func {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* SPI3_CLK */
+ 0x0 /* SPI3_DI */
+ 0x010 0x0 /* SPI3_DO */
+ 0x014 0x0 /* SPI3_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx7: pinmux@ff3fd800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff3fd800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ sdio_clk_cfg_func: sdio_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SDIO_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA DRIVE6_MASK
+ >;
+ };
+
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SDIO_CMD */
+ 0x008 0x0 /* SDIO_DATA0 */
+ 0x00c 0x0 /* SDIO_DATA1 */
+ 0x010 0x0 /* SDIO_DATA2 */
+ 0x014 0x0 /* SDIO_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx8: pinmux@ff37e800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff37e800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ sd_clk_cfg_func: sd_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SD_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA
+ DRIVE6_MASK
+ >;
+ };
+
+ sd_cfg_func: sd_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SD_CMD */
+ 0x008 0x0 /* SD_DATA0 */
+ 0x00c 0x0 /* SD_DATA1 */
+ 0x010 0x0 /* SD_DATA2 */
+ 0x014 0x0 /* SD_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA
+ DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx9: pinmux@fff11800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xfff11800 0x0 0xbc>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x01c 0x0 /* I2C0_SCL */
+ 0x020 0x0 /* I2C0_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x024 0x0 /* I2C1_SCL */
+ 0x028 0x0 /* I2C1_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2c7_cfg_func: i2c7_cfg_func {
+ pinctrl-single,pins = <
+ 0x02c 0x0 /* I2C7_SCL */
+ 0x030 0x0 /* I2C7_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ slimbus_cfg_func: slimbus_cfg_func {
+ pinctrl-single,pins = <
+ 0x034 0x0 /* SLIMBUS_CLK */
+ 0x038 0x0 /* SLIMBUS_DATA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2s0_cfg_func: i2s0_cfg_func {
+ pinctrl-single,pins = <
+ 0x040 0x0 /* I2S0_DI */
+ 0x044 0x0 /* I2S0_DO */
+ 0x048 0x0 /* I2S0_XCLK */
+ 0x04c 0x0 /* I2S0_XFS */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2s2_cfg_func: i2s2_cfg_func {
+ pinctrl-single,pins = <
+ 0x050 0x0 /* I2S2_DI */
+ 0x054 0x0 /* I2S2_DO */
+ 0x058 0x0 /* I2S2_XCLK */
+ 0x05c 0x0 /* I2S2_XFS */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ pcie_cfg_func: pcie_cfg_func {
+ pinctrl-single,pins = <
+ 0x094 0x0 /* PCIE_CLKREQ_N */
+ 0x098 0x0 /* PCIE_WAKE_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ spi2_cfg_func: spi2_cfg_func {
+ pinctrl-single,pins = <
+ 0x09c 0x0 /* SPI2_CLK */
+ 0x0a0 0x0 /* SPI2_DI */
+ 0x0a4 0x0 /* SPI2_DO */
+ 0x0a8 0x0 /* SPI2_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ usb_cfg_func: usb_cfg_func {
+ pinctrl-single,pins = <
+ 0x0ac 0x0 /* GPIO_219 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
>;
};
};
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
*/
/dts-v1/;
compatible = "usb-nop-xceiv";
vcc-supply = <&exp_usb3_vbus>;
};
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+ð1 {
+ phy-mode = "sgmii";
+ phy = <&phy1>;
+ status = "okay";
};
&i2c0 {
};
};
+&mdio {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+ status = "okay";
+};
+
/* CON3 */
&sata {
status = "okay";
};
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+ wp-inverted;
+ cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
};
};
-/* Exported on the micro USB connector CON32 through an FTDI */
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI
+ */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
-&sdhci0 {
- non-removable;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
status = "okay";
};
-/* CON31 */
+/* CON29(V2.0)/CON31(V1.4) */
&usb3 {
status = "okay";
usb-phy = <&usb3_phy>;
};
-
-/* CON17 (PCIe) / CON12 (mini-PCIe) */
-&pcie0 {
- status = "okay";
-};
-
-/* CON27 */
-&usb2 {
- status = "okay";
-};
-
-
-&mdio {
- status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
- phy = <&phy0>;
- status = "okay";
-};
-
-ð1 {
- phy-mode = "sgmii";
- phy = <&phy1>;
- status = "okay";
-};
pinctrl_nb: pinctrl@13800 {
compatible = "marvell,armada3710-nb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x13800 0x100>, <0x13C00 0x20>;
gpionb: gpio {
#gpio-cells = <2>;
pinctrl_sb: pinctrl@18800 {
compatible = "marvell,armada3710-sb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
gpiosb: gpio {
#gpio-cells = <2>;
xor@60900 {
compatible = "marvell,armada-3700-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
+ reg = <0x60900 0x100>,
+ <0x60b00 0x100>;
xor10 {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
+ sdhci1: sdhci@d0000 {
+ compatible = "marvell,armada-3700-sdhci",
+ "marvell,sdhci-xenon";
+ reg = <0xd0000 0x300>,
+ <0x1e808 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
sdhci0: sdhci@d8000 {
compatible = "marvell,armada-3700-sdhci",
- "marvell,sdhci-xenon";
- reg = <0xd8000 0x300
- 0x17808 0x4>;
+ "marvell,sdhci-xenon";
+ reg = <0xd8000 0x300>,
+ <0x17808 0x4>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 0>;
clock-names = "core";
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7020";
};
&cpm_mdio {
+ status = "okay";
+
phy0: ethernet-phy@0 {
reg = <0>;
};
phy = <&phy1>;
phy-mode = "rgmii-id";
};
-
-&cpm_crypto {
- status = "okay";
-};
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7040";
--- /dev/null
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+#include "armada-cp110-master.dtsi"
+
+/ {
+ aliases {
+ gpio1 = &cpm_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+&cpm_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-7k-pinctrl";
+ };
+};
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8020";
};
&cpm_mdio {
+ status = "okay";
+
phy1: ethernet-phy@1 {
reg = <1>;
};
phy-mode = "rgmii-id";
};
-&cpm_crypto {
- status = "okay";
-};
-
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
status = "okay";
};
+&cps_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cps_ethernet {
+ status = "okay";
+};
+
+&cps_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
status = "okay";
};
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
&cpm_i2c0 {
clock-frequency = <100000>;
status = "okay";
};
+&cpm_mdio {
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&cpm_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
};
+&cpm_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
&cpm_usb3_0 {
/* J38? - USB2.0 only */
status = "okay";
status = "okay";
};
+&cps_ethernet {
+ status = "okay";
+};
+
+&cps_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+};
+
&cps_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8040";
--- /dev/null
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+#include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
+
+/ {
+ aliases {
+ gpio1 = &cps_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cps_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cpm-pinctrl";
+ };
+};
+
+&cps_syscon0 {
+ cps_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cps-pinctrl";
+ };
+};
aliases {
serial0 = &uart0;
serial1 = &uart1;
+ gpio0 = &ap_gpio;
};
psci {
marvell,spi-base = <128>, <136>, <144>, <152>;
};
+ gicp: gicp@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+ };
+
pic: interrupt-controller@3f0100 {
compatible = "marvell,armada-8k-pic";
reg = <0x3f0100 0x10>;
reg = <0x400000 0x1000>,
<0x410000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
reg = <0x420000 0x1000>,
<0x430000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
reg = <0x440000 0x1000>,
<0x450000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
reg = <0x460000 0x1000>,
<0x470000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
- clocks = <&ap_syscon 4>;
+ clocks = <&ap_clk 4>;
dma-coherent;
marvell,xenon-phy-slow-mode;
status = "disabled";
};
ap_syscon: system-controller@6f4000 {
- compatible = "marvell,ap806-system-controller",
- "syscon";
- #clock-cells = <1>;
- clock-output-names = "ap-cpu-cluster-0",
- "ap-cpu-cluster-1",
- "ap-fixed", "ap-mss",
- "ap-emmc";
+ compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
+
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+ };
+
+ ap_gpio: gpio {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 19>;
+ };
};
};
};
* Device Tree file for Marvell Armada CP110 Master.
*/
+#define ICU_GRP_NSR 0x0
+
/ {
cp110-master {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&cpm_icu>;
ranges;
config-space@f2000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf2000000 0x2000000>;
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+ clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
status = "disabled";
dma-coherent;
cpm_eth0: eth0 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cpm_eth1: eth1 {
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cpm_eth2: eth2 {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
+ clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>;
+ status = "disabled";
+ };
+
+ cpm_xmdio: mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
+ cpm_icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x10>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
};
cpm_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cpm-apll", "cpm-ppv2-core", "cpm-eip",
- "cpm-core", "cpm-nand-core";
- gate-clock-output-names =
- "cpm-audio", "cpm-communit", "cpm-nand",
- "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
- "cpm-mg-core", "cpm-xor1", "cpm-xor0",
- "cpm-gop-dp", "none", "cpm-pcie_x10",
- "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
- "cpm-sata", "cpm-sata-usb", "cpm-main",
- "cpm-sd-mmc-gop", "none", "none",
- "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
- "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+
+ cpm_clk: clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ cpm_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cpm_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ status = "disabled";
+ };
};
cpm_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 15>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 15>;
status = "disabled";
};
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 22>;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 22>;
status = "disabled";
};
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 23>;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 23>;
status = "disabled";
};
<0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cpm_syscon0 1 8>;
+ clocks = <&cpm_clk 1 8>;
};
cpm_xor1: xor@6c0000 {
<0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cpm_syscon0 1 7>;
+ clocks = <&cpm_clk 1 7>;
};
cpm_spi0: spi@700600 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
#address-cells = <1>;
#size-cells = <0>;
cell-index = <2>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
cpm_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 25>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 25>;
status = "okay";
};
cpm_sdhci0: sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
- clocks = <&cpm_syscon0 1 4>;
+ clocks = <&cpm_clk 1 4>;
dma-coherent;
status = "disabled";
};
cpm_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
- clocks = <&cpm_syscon0 1 26>;
- status = "disabled";
+ clocks = <&cpm_clk 1 26>;
+ dma-mask = <0xff 0xffffffff>;
};
};
/* non-prefetchable memory */
0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 13>;
+ clocks = <&cpm_clk 1 13>;
status = "disabled";
};
/* non-prefetchable memory */
0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 11>;
+ clocks = <&cpm_clk 1 11>;
status = "disabled";
};
/* non-prefetchable memory */
0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 12>;
+ clocks = <&cpm_clk 1 12>;
status = "disabled";
};
};
* Device Tree file for Marvell Armada CP110 Slave.
*/
+#define ICU_GRP_NSR 0x0
+
/ {
cp110-slave {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&cps_icu>;
ranges;
config-space@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf4000000 0x2000000>;
cps_rtc: rtc@284000 {
cps_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+ clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
status = "disabled";
dma-coherent;
cps_eth0: eth0 {
- interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cps_eth1: eth1 {
- interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cps_eth2: eth2 {
- interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
+ clocks = <&cps_clk 1 9>, <&cps_clk 1 5>;
+ status = "disabled";
+ };
+
+ cps_xmdio: mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
+ cps_icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x10>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
};
cps_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cps-apll", "cps-ppv2-core", "cps-eip",
- "cps-core", "cps-nand-core";
- gate-clock-output-names =
- "cps-audio", "cps-communit", "cps-nand",
- "cps-ppv2", "cps-sdio", "cps-mg-domain",
- "cps-mg-core", "cps-xor1", "cps-xor0",
- "cps-gop-dp", "none", "cps-pcie_x10",
- "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
- "cps-sata", "cps-sata-usb", "cps-main",
- "cps-sd-mmc-gop", "none", "none",
- "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
- "cps-usb3dev", "cps-eip150", "cps-eip197";
+
+ cps_clk: clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ cps_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cps_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 32 31>;
+ status = "disabled";
+ };
+
};
cps_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 15>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 15>;
status = "disabled";
};
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 22>;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 22>;
status = "disabled";
};
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 23>;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 23>;
status = "disabled";
};
<0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 8>;
+ clocks = <&cps_clk 1 8>;
};
cps_xor1: xor@6c0000 {
<0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 7>;
+ clocks = <&cps_clk 1 7>;
};
cps_spi0: spi@700600 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <3>;
- clocks = <&cps_syscon0 1 21>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
#address-cells = <1>;
#size-cells = <0>;
cell-index = <4>;
- clocks = <&cps_syscon0 1 21>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
cps_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 25>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 25>;
status = "okay";
};
cps_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
- clocks = <&cps_syscon0 1 26>;
+ clocks = <&cps_clk 1 26>;
+ dma-mask = <0xff 0xffffffff>;
+ /*
+ * The cryptographic engine found on the cp110
+ * master is enabled by default at the SoC
+ * level. Because it is not possible as of now
+ * to enable two cryptographic engines in
+ * parallel, disable this one by default.
+ */
status = "disabled";
};
};
/* non-prefetchable memory */
0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 13>;
+ clocks = <&cps_clk 1 13>;
status = "disabled";
};
/* non-prefetchable memory */
0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 11>;
+ clocks = <&cps_clk 1 11>;
status = "disabled";
};
/* non-prefetchable memory */
0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 12>;
+ clocks = <&cps_clk 1 12>;
status = "disabled";
};
};
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y)
--- /dev/null
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6797.dtsi"
+
+/ {
+ model = "MediaTek MT6797 Evaluation Board";
+ compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x1e800000>;
+ };
+
+ chosen {};
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/mt6797-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt6797";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x001>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x002>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x003>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x103>;
+ };
+
+ cpu8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x200>;
+ };
+
+ cpu9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x201>;
+ };
+ };
+
+ clk26m: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ topckgen: topckgen@10000000 {
+ compatible = "mediatek,mt6797-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infrasys: infracfg_ao@10001000 {
+ compatible = "mediatek,mt6797-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt6797-scpsys";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_MUX_MFG>,
+ <&topckgen CLK_TOP_MUX_MM>,
+ <&topckgen CLK_TOP_MUX_VDEC>;
+ clock-names = "mfg", "mm", "vdec";
+ infracfg = <&infrasys>;
+ };
+
+ apmixedsys: apmixed@1000c000 {
+ compatible = "mediatek,mt6797-apmixedsys";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6797-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220620 0 0x20>,
+ <0 0x10220690 0 0x10>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART0>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART1>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART2>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART3>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ mmsys: mmsys_config@14000000 {
+ compatible = "mediatek,mt6797-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: imgsys_config@15000000 {
+ compatible = "mediatek,mt6797-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: vdec_gcon@16000000 {
+ compatible = "mediatek,mt6797-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: venc_gcon@17000000 {
+ compatible = "mediatek,mt6797-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ gic: interrupt-controller@19000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ reg = <0 0x19000000 0 0x10000>, /* GICD */
+ <0 0x19200000 0 0x200000>, /* GICR */
+ <0 0x10240000 0 0x2000>; /* GICC */
+ };
+};
<0 0x11280700 0 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
- phys = <&phy_port0 PHY_TYPE_USB3>,
- <&phy_port1 PHY_TYPE_USB2>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
clocks = <&topckgen CLK_TOP_USB30_SEL>,
<&clk26m>,
u3phy: usb-phy@11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0 0x11290000 0 0x800>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "okay";
- phy_port0: port@11290800 {
- reg = <0 0x11290800 0 0x800>;
+ u2port0: usb-phy@11290800 {
+ reg = <0 0x11290800 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- phy_port1: port@11291000 {
- reg = <0 0x11291000 0 0x800>;
+ u3port0: usb-phy@11290900 {
+ reg = <0 0x11290900 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u2port1: usb-phy@11291000 {
+ reg = <0 0x11291000 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
#clock-cells = <1>;
};
- mdp {
- compatible = "mediatek,mt8173-mdp";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ mdp_rdma0: rdma@14001000 {
+ compatible = "mediatek,mt8173-mdp-rdma",
+ "mediatek,mt8173-mdp";
+ reg = <0 0x14001000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+ <&mmsys CLK_MM_MUTEX_32K>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+ mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
+ };
- mdp_rdma0: rdma@14001000 {
- compatible = "mediatek,mt8173-mdp-rdma";
- reg = <0 0x14001000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RDMA0>,
- <&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
- };
-
- mdp_rdma1: rdma@14002000 {
- compatible = "mediatek,mt8173-mdp-rdma";
- reg = <0 0x14002000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RDMA1>,
- <&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
- };
+ mdp_rdma1: rdma@14002000 {
+ compatible = "mediatek,mt8173-mdp-rdma";
+ reg = <0 0x14002000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+ <&mmsys CLK_MM_MUTEX_32K>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+ mediatek,larb = <&larb4>;
+ };
- mdp_rsz0: rsz@14003000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14003000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_rsz0: rsz@14003000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14003000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_rsz1: rsz@14004000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14004000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_rsz1: rsz@14004000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14004000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_rsz2: rsz@14005000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14005000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ2>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_rsz2: rsz@14005000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14005000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_wdma0: wdma@14006000 {
- compatible = "mediatek,mt8173-mdp-wdma";
- reg = <0 0x14006000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WDMA>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
- };
+ mdp_wdma0: wdma@14006000 {
+ compatible = "mediatek,mt8173-mdp-wdma";
+ reg = <0 0x14006000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WDMA>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
- mdp_wrot0: wrot@14007000 {
- compatible = "mediatek,mt8173-mdp-wrot";
- reg = <0 0x14007000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WROT0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
- };
+ mdp_wrot0: wrot@14007000 {
+ compatible = "mediatek,mt8173-mdp-wrot";
+ reg = <0 0x14007000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WROT0>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WROT0>;
+ mediatek,larb = <&larb0>;
+ };
- mdp_wrot1: wrot@14008000 {
- compatible = "mediatek,mt8173-mdp-wrot";
- reg = <0 0x14008000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WROT1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
- };
+ mdp_wrot1: wrot@14008000 {
+ compatible = "mediatek,mt8173-mdp-wrot";
+ reg = <0 0x14008000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WROT1>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WROT1>;
+ mediatek,larb = <&larb4>;
};
ovl0: ovl@1400c000 {
#address-cells = <2>;
#size-cells = <2>;
- pcie-controller@01003000 {
+ pcie@1003000 {
compatible = "nvidia,tegra124-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
device_type = "pci";
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
device_type = "pci";
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
reg-names = "pmc", "wake", "aotag", "scratch";
};
+ ccplex@e000000 {
+ compatible = "nvidia,tegra186-ccplex-cluster";
+ reg = <0x0 0x0e000000 0x0 0x3fffff>;
+
+ nvidia,bpmp = <&bpmp>;
+ };
+
gpu@17000000 {
compatible = "nvidia,gp10b";
reg = <0x0 0x17000000 0x0 0x1000000>,
model = "NVIDIA Jetson TX1 Developer Kit";
compatible = "nvidia,p2371-2180", "nvidia,tegra210";
- pcie-controller@01003000 {
+ pcie@1003000 {
status = "okay";
avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
#address-cells = <2>;
#size-cells = <2>;
- pcie-controller@01003000 {
+ pcie@1003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
device_type = "pci";
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
device_type = "pci";
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "wlan";
+ linux,default-trigger = "phy0tx";
default-state = "off";
};
usb@78d9000 {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
- };
-
- ehci@78d9000 {
- status = "okay";
- };
-
- phy@78d9000 {
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
- vddcx-supply = <&pm8916_s1>;
- extcon = <&usb_id>, <&usb_id>;
- dr_mode = "otg";
- status = "okay";
- switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_sw_sel_pm>;
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ ulpi {
+ phy {
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+ extcon = <&usb_id>;
+ };
+ };
};
lpass@07708000 {
pinctrl-0 = <&usb_id_default>;
};
+ usb-switch {
+ compatible = "toshiba,tc7usb40mu";
+ switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+ extcon = <&usb_id>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_sw_sel_pm>;
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
status = "disabled";
};
- usb_dev: usb@78d9000 {
+ otg: usb@78d9000 {
compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x400>;
- dr_mode = "peripheral";
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- usb-phy = <&usb_otg>;
- status = "disabled";
- };
-
- usb_host: ehci@78d9000 {
- compatible = "qcom,ehci-host";
- reg = <0x78d9000 0x400>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- usb-phy = <&usb_otg>;
- status = "disabled";
- };
-
- usb_otg: phy@78d9000 {
- compatible = "qcom,usb-otg-snps";
- reg = <0x78d9000 0x400>;
+ reg = <0x78d9000 0x200>,
+ <0x78d9200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-
- qcom,vdd-levels = <500000 1000000 1320000>;
- qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
- dr_mode = "peripheral";
- qcom,otg-control = <2>; // PMIC
- qcom,manual-pullup;
-
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>,
- <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "iface", "core", "sleep";
-
- resets = <&gcc GCC_USB2A_PHY_BCR>,
- <&gcc GCC_USB_HS_BCR>;
- reset-names = "phy", "link";
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44
+ 0x1 0x6b 0x2 0x24 0x3 0x13>;
+ };
+ };
};
intc: interrupt-controller@b000000 {
clock-frequency = <32768>;
};
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ status = "okay";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
+ sfpb_mutex: hwmutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_regs 0x0 0x100>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
<0xf9002000 0x1000>;
};
+ apcs: syscon@f900d000 {
+ compatible = "syscon";
+ reg = <0xf900d000 0x2000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
+ sfpb_mutex_regs: syscon@fd484000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "syscon";
+ reg = <0xfd484000 0x400>;
+ };
};
memory {
device_type = "memory";
reg = <0 0 0 0>; // bootloader will update
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smem_region: smem@6a00000 {
+ reg = <0x0 0x6a00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
};
reg = <0x300000 0x90000>;
};
+ kryocc: clock-controller@6400000 {
+ compatible = "qcom,apcc-msm8996";
+ reg = <0x6400000 0x90000>;
+ #clock-cells = <1>;
+ };
+
blsp1_spi0: spi@07575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
--- /dev/null
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x0000000000000000 0x0000000000030000;
+/memreserve/ 0x000000000001f000 0x0000000000001000;
+/memreserve/ 0x0000000000030000 0x00000000000d0000;
+/memreserve/ 0x0000000001b00000 0x00000000004be000;
+/memreserve/ 0x0000000001ffe000 0x0000000000004000;
+
+#include "rtd1295.dtsi"
+
+/ {
+ compatible = "zidoo,x9s", "realtek,rtd1295";
+ model = "Zidoo X9S";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Realtek RTD1295 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "realtek,rtd1295";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tee@10100000 {
+ reg = <0x10100000 0xf00000>;
+ no-map;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Exclude up to 2 GiB of RAM */
+ ranges = <0x80000000 0x80000000 0x80000000>;
+
+ uart0: serial@98007800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x98007800 0x400>,
+ <0x98007000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@9801b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9801b200 0x100>,
+ <0x9801b00c 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial@9801b400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9801b400 0x100>,
+ <0x9801b00c 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff011000 {
+ compatible = "arm,gic-400";
+ reg = <0xff011000 0x1000>,
+ <0xff012000 0x2000>,
+ <0xff014000 0x2000>,
+ <0xff016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
--- /dev/null
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a7795 ES1.x";
+ compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&x22_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the r8a7795 ES1.x SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "r8a7795.dtsi"
+
+&soc {
+ xhci1: usb@ee0400000 {
+ compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+ reg = <0 0xee040000 0 0xc00>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 327>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
+ status = "disabled";
+ };
+
+ fcpf2: fcp@fe952000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe952000 0 0x200>;
+ clocks = <&cpg CPG_MOD 613>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
+ };
+
+ vspi2: vsp@fe9c0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9c0000 0 0x8000>;
+ interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 629>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
+
+ renesas,fcp = <&fcpvi2>;
+ };
+
+ fcpvi2: fcp@fe9cf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9cf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 609>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
+ };
+
+ vspd3: vsp@fea38000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea38000 0 0x4000>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+
+ renesas,fcp = <&fcpvd3>;
+ };
+
+ fcpvd3: fcp@fea3f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea3f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 600>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
+ };
+
+ fdp1@fe948000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe948000 0 0x2400>;
+ interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 117>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
+ renesas,fcp = <&fcpf2>;
+ };
+};
+
+&du {
+ compatible = "renesas,du-r8a7795";
+ vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+};
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
/dts-v1/;
#include "r8a7795.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795";
+ model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- aliases {
- serial0 = &scif2;
- ethernet0 = &avb;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
device_type = "memory";
reg = <0x7 0x00000000 0x0 0x40000000>;
};
-
- leds {
- compatible = "gpio-leds";
-
- led5 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
- led6 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- key-1 {
- linux,code = <KEY_1>;
- label = "SW3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- audio_clkout: audio-clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- avb_pins: avb {
- groups = "avb_mdc";
- function = "avb";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound-clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb1_pins: usb1 {
- groups = "usb1";
- function = "usb1";
- };
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk-multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE R8A7795_CLK_S0D4>;
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
- };
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
};
* kind, whether express or implied.
*/
-/*
- * SSI-AK4613
- *
- * This command is required when Playback/Capture
- *
- * amixer set "DVC Out" 100%
- * amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- * amixer set "DVC Out Mute" on
- * amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
- * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- * amixer set "DVC Out Ramp" on
- * aplay xxx.wav &
- * amixer set "DVC Out" 80% // Volume Down
- * amixer set "DVC Out" 100% // Volume Up
- */
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
#include "r8a7795.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7795";
+ model = "Renesas Salvator-X board based on r8a7795 ES2.0+";
compatible = "renesas,salvator-x", "renesas,r8a7795";
- aliases {
- serial0 = &scif2;
- serial1 = &scif1;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi3: regulator-vcc-sdhi3 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI3 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi3: regulator-vccq-sdhi3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI3 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
};
- vbus0_usb2: regulator-vbus0-usb2 {
- compatible = "regulator-fixed";
-
- regulator-name = "USB20_VBUS0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
};
- audio_clkout: audio_clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
};
+};
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
- };
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&x22_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
- vga-encoder {
- compatible = "adi,adv7123";
+&ehci2 {
+ status = "okay";
+};
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+&hdmi0 {
+ status = "okay";
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
};
};
};
+};
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
+&hdmi1 {
status = "okay";
ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- port@3 {
- lvds_connector: endpoint {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
};
};
};
};
-&extal_clk {
- clock-frequency = <16666666>;
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
};
-&extalr_clk {
- clock-frequency = <32768>;
+&ohci2 {
+ status = "okay";
};
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif1_pins: scif1 {
- groups = "scif1_data_a", "scif1_ctrl";
- function = "scif1";
- };
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- avb_pins: avb {
- mux {
- groups = "avb_link", "avb_phy_int", "avb_mdc",
- "avb_mii";
- function = "avb";
- };
-
- pins_mdc {
- groups = "avb_mdc";
- drive-strength = <24>;
- };
-
- pins_mii_tx {
- pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
- "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
- drive-strength = <12>;
- };
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
- function = "du";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <3300>;
- };
-
- sdhi3_pins_uhs: sd3_uhs {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- usb1_pins: usb1 {
- mux {
- groups = "usb1";
- function = "usb1";
- };
-
- ovc {
- pins = "GP_6_27";
- bias-pull-up;
- };
-
- pwen {
- pins = "GP_6_26";
- bias-pull-down;
- };
- };
-
usb2_pins: usb2 {
groups = "usb2";
function = "usb2";
};
};
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk_multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE R8A7795_CLK_S0D4>;
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
- };
- };
-};
-
&sata {
status = "okay";
};
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&sdhi3 {
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi3>;
- vqmmc-supply = <&vccq_sdhi3>;
- cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&i2c_dvfs {
- status = "okay";
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&xhci0 {
- status = "okay";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&vbus0_usb2>;
- status = "okay";
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
status = "okay";
};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&hsusb {
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pciec0 {
- status = "okay";
-};
-
-&pciec1 {
- status = "okay";
-};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
+ compatible = "renesas,salvator-xs", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&x21_clk>,
+ <&x22_clk>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.1", "dclkin.2";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
clock-frequency = <0>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#power-domain-cells = <1>;
};
- pfc: pfc@e6060000 {
+ pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a7795";
reg = <0 0xe6060000 0 0x50c>;
};
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
status = "disabled";
};
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
status = "disabled";
rcar_sound,dvc {
status = "disabled";
};
- xhci1: usb@ee0400000 {
- compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
- reg = <0 0xee040000 0 0xc00>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 327>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 327>;
- status = "disabled";
- };
-
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
resets = <&cpg 614>;
};
- fcpf2: fcp@fe952000 {
- compatible = "renesas,fcpf";
- reg = <0 0xfe952000 0 0x200>;
- clocks = <&cpg CPG_MOD 613>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 613>;
- };
-
vspbd: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
resets = <&cpg 610>;
};
- vspi2: vsp@fe9c0000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfe9c0000 0 0x8000>;
- interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 629>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 629>;
-
- renesas,fcp = <&fcpvi2>;
- };
-
- fcpvi2: fcp@fe9cf000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfe9cf000 0 0x200>;
- clocks = <&cpg CPG_MOD 609>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 609>;
- };
-
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x4000>;
resets = <&cpg 601>;
};
- vspd3: vsp@fea38000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfea38000 0 0x4000>;
- interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 620>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 620>;
-
- renesas,fcp = <&fcpvd3>;
- };
-
- fcpvd3: fcp@fea3f000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfea3f000 0 0x200>;
- clocks = <&cpg CPG_MOD 600>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 600>;
- };
-
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
renesas,fcp = <&fcpf1>;
};
- fdp1@fe948000 {
- compatible = "renesas,fdp1";
- reg = <0 0xfe948000 0 0x2400>;
- interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 117>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 117>;
- renesas,fcp = <&fcpf2>;
+ hdmi0: hdmi0@fead0000 {
+ compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi1: hdmi1@feae0000 {
+ compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfeae0000 0 0x10000>;
+ interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 728>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi1_in: endpoint {
+ remote-endpoint = <&du_out_hdmi1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
};
du: display@feb00000 {
- compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
- vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
reg = <2>;
du_out_hdmi1: endpoint {
+ remote-endpoint = <&dw_hdmi1_in>;
};
};
port@3 {
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
+
/dts-v1/;
#include "r8a7796.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
/ {
model = "Renesas M3ULCB board based on r8a7796";
compatible = "renesas,m3ulcb", "renesas,r8a7796";
- aliases {
- serial0 = &scif2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- leds {
- compatible = "gpio-leds";
-
- led5 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
- led6 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- key-1 {
- linux,code = <KEY_1>;
- label = "SW3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
};
};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
+
/dts-v1/;
#include "r8a7796.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "salvator-x.dtsi"
/ {
model = "Renesas Salvator-X board based on r8a7796";
compatible = "renesas,salvator-x", "renesas,r8a7796";
- aliases {
- serial0 = &scif2;
- serial1 = &scif1;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel";
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x80000000>;
};
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi3: regulator-vcc-sdhi3 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI3 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi3: regulator-vccq-sdhi3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI3 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- avb_pins: avb {
- groups = "avb_mdc";
- function = "avb";
- };
-
- scif1_pins: scif1 {
- groups = "scif1_data_a", "scif1_ctrl";
- function = "scif1";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <3300>;
- };
-
- sdhi3_pins_uhs: sd3_uhs {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <1800>;
- };
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&sdhi3 {
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi3>;
- vqmmc-supply = <&vccq_sdhi3>;
- cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&i2c_dvfs {
- status = "okay";
};
clock-frequency = <0>;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
clock-frequency = <0>;
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
status = "disabled";
};
dma-channels = <16>;
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ hsusb: usb@e6590000 {
+ /* placeholder */
+ };
+
+ xhci0: usb@ee000000 {
+ /* placeholder */
+ };
+
+ ohci0: usb@ee080000 {
+ /* placeholder */
+ };
+
+ ehci0: usb@ee080100 {
+ /* placeholder */
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ /* placeholder */
+ };
+
+ ohci1: usb@ee0a0000 {
+ /* placeholder */
+ };
+
+ ehci1: usb@ee0a0100 {
+ /* placeholder */
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ /* placeholder */
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7796";
reg = <0 0xee100000 0 0x2000>;
};
};
};
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ pciec0: pcie@fe000000 {
+ /* placeholder */
+ };
+
+ pciec1: pcie@ee800000 {
+ /* placeholder */
+ };
+
+ du: display@feb00000 {
+ /* placeholder */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ };
+ };
};
};
--- /dev/null
+/*
+ * Device Tree Source for common parts of Salvator-X board variants
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ serial1 = &scif1;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_clkout: audio_clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+
+ brightness-levels = <256 128 64 16 8 4 0>;
+ default-brightness-level = <6>;
+
+ enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi3: regulator-vcc-sdhi3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI3 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi3: regulator-vccq-sdhi3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI3 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ };
+ };
+ };
+
+ hdmi1-out {
+ compatible = "hdmi-connector";
+ label = "HDMI1 OUT";
+ type = "a";
+
+ port {
+ hdmi1_con: endpoint {
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ /* External DU dot clocks */
+ x21_clk: x21-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x22_clk: x22-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x23_clk: x23-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@3 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&hsusb {
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ csa_vdd: adc@7c {
+ compatible = "maxim,max9611";
+ reg = <0x7c>;
+
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ csa_dvfs: adc@7f {
+ compatible = "maxim,max9611";
+ reg = <0x7f>;
+
+ shunt-resistor-micro-ohms = <5000>;
+ };
+};
+
+&i2c_dvfs {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pciec1 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_a";
+ function = "pwm1";
+ };
+
+ scif1_pins: scif1 {
+ groups = "scif1_data_a", "scif1_ctrl";
+ function = "scif1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sdhi3_pins_uhs: sd3_uhs {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+
+ pwen {
+ pins = "GP_6_26";
+ bias-pull-down;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600 12288000>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi3>;
+ vqmmc-supply = <&vccq_sdhi3>;
+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board";
+ compatible = "renesas,salvator-x";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&i2c4 {
+ versaclock5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x23_clk>;
+ clock-names = "xin";
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board";
+ compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+ clock-frequency = <16640000>;
+};
--- /dev/null
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas R-Car Gen3 ULCB board";
+
+ aliases {
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600 12288000>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
always := $(dtb-y)
<32768>;
};
+ sdmmc: dwmmc@ff500000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff500000 0x0 0x4000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@ff510000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff510000 0x0 0x4000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff520000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff520000 0x0 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
gmac2io: ethernet@ff540000 {
compatible = "rockchip,rk3328-gmac";
reg = <0x0 0xff540000 0x0 0x10000>;
--- /dev/null
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+ model = "Firefly-RK3399 Board";
+ compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm0 0 25000 0>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ rt5640-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rockchip,rt5640-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rt5640>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <0>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ rt5640: rt5640@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ realtek,in1-differential;
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rt5640_hpcon>;
+ };
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_3g_drv: pcie-3g-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rt5640 {
+ rt5640_hpcon: rt5640-hpcon {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
#include <dt-bindings/input/input.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-op1-opp.dtsi"
/ {
chosen {
--- /dev/null
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <900000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <975000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <850000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <900000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <975000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <1250000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
};
opp02 {
opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <850000>;
};
opp03 {
opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <875000>;
+ opp-microvolt = <925000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <925000>;
+ opp-microvolt = <1000000>;
};
opp05 {
opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1050000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1512000000>;
opp-microvolt = <1125000>;
};
};
};
opp06 {
opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1075000>;
+ opp-microvolt = <1100000>;
};
opp07 {
opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1150000>;
- };
- opp08 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-microvolt = <1250000>;
+ opp-microvolt = <1200000>;
};
};
};
#size-cells = <2>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
#size-cells = <2>;
#interrupt-cells = <1>;
aspm-no-l0s;
- bus-range = <0x0 0x1>;
+ bus-range = <0x0 0x1f>;
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
clock-names = "aclk", "aclk-perf",
msi-map = <0x0 &its 0x0 0x1000>;
phys = <&pcie_phy>;
phy-names = "pcie-phy";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
- 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
+ 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
status = "disabled";
};
- qos_sd: qos@ffa74000 {
- compatible = "syscon";
- reg = <0x0 0xffa74000 0x0 0x20>;
- };
-
qos_emmc: qos@ffa58000 {
compatible = "syscon";
reg = <0x0 0xffa58000 0x0 0x20>;
reg = <0x0 0xffa5c000 0x0 0x20>;
};
+ qos_pcie: qos@ffa60080 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60080 0x0 0x20>;
+ };
+
+ qos_usb_host0: qos@ffa60100 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60100 0x0 0x20>;
+ };
+
+ qos_usb_host1: qos@ffa60180 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60180 0x0 0x20>;
+ };
+
+ qos_usb_otg0: qos@ffa70000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa70000 0x0 0x20>;
+ };
+
+ qos_usb_otg1: qos@ffa70080 {
+ compatible = "syscon";
+ reg = <0x0 0xffa70080 0x0 0x20>;
+ };
+
+ qos_sd: qos@ffa74000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa74000 0x0 0x20>;
+ };
+
+ qos_sdioaudio: qos@ffa76000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa76000 0x0 0x20>;
+ };
+
qos_hdcp: qos@ffa90000 {
compatible = "syscon";
reg = <0x0 0xffa90000 0x0 0x20>;
reg = <0x0 0xffad0000 0x0 0x20>;
};
+ qos_perihp: qos@ffad8080 {
+ compatible = "syscon";
+ reg = <0x0 0xffad8080 0x0 0x20>;
+ };
+
qos_gpu: qos@ffae0000 {
compatible = "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
};
};
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins =
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins =
+ <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins =
+ <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins =
+ <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_wp: sdmmc-wp {
+ rockchip,pins =
+ <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
sleep {
ap_pwroff: ap-pwroff {
rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>;
rockchip,pins =
<4 21 RK_FUNC_1 &pcfg_pull_none>;
};
+
+ spdif_bus_1: spdif-bus-1 {
+ rockchip,pins =
+ <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ };
};
spi0 {
};
};
+ hdmi {
+ hdmi_i2c_xfer: hdmi-i2c-xfer {
+ rockchip,pins =
+ <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>,
+ <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ hdmi_cec: hdmi-cec {
+ rockchip,pins =
+ <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_clkreqn: pci-clkreqn {
rockchip,pins =
rockchip,pins =
<4 24 RK_FUNC_1 &pcfg_pull_none>;
};
+
+ pcie_clkreqn_cpm: pci-clkreqn-cpm {
+ rockchip,pins =
+ <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+ rockchip,pins =
+ <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ld11-global.dtb \
uniphier-ld11-ref.dtb \
+ uniphier-ld20-global.dtb \
uniphier-ld20-ref.dtb
always := $(dtb-y)
--- /dev/null
+/*
+ * Device Tree Source for UniPhier LD11 Global Board
+ *
+ * Copyright (C) 2016-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+
+/ {
+ model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+ compatible = "socionext,uniphier-ld11-global",
+ "socionext,uniphier-ld11";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
-/memreserve/ 0x80000000 0x00080000;
+/memreserve/ 0x80000000 0x02000000;
/ {
compatible = "socionext,uniphier-ld11";
compatible = "operating-points-v2";
opp-shared;
- opp@245000000 {
+ opp-245000000 {
opp-hz = /bits/ 64 <245000000>;
clock-latency-ns = <300>;
};
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@490000000 {
+ opp-490000000 {
opp-hz = /bits/ 64 <490000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@653334000 {
+ opp-653334000 {
opp-hz = /bits/ 64 <653334000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@980000000 {
+ opp-980000000 {
opp-hz = /bits/ 64 <980000000>;
clock-latency-ns = <300>;
};
pinctrl-0 = <&pinctrl_system_bus>;
};
- smpctrl@59800000 {
+ smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <21>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
usb0: usb@5a800100 {
--- /dev/null
+/*
+ * Device Tree Source for UniPhier LD20 Global Board
+ *
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld20.dtsi"
+
+/ {
+ model = "UniPhier LD20 Global Board (REF_LD20_GP)";
+ compatible = "socionext,uniphier-ld20-global",
+ "socionext,uniphier-ld20";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xc0000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
-/memreserve/ 0x80000000 0x00080000;
+/memreserve/ 0x80000000 0x02000000;
/ {
compatible = "socionext,uniphier-ld20";
compatible = "operating-points-v2";
opp-shared;
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@275000000 {
+ opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@550000000 {
+ opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@733334000 {
+ opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
compatible = "operating-points-v2";
opp-shared;
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@275000000 {
+ opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@550000000 {
+ opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@733334000 {
+ opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
pinctrl-0 = <&pinctrl_system_bus>;
};
- smpctrl@59800000 {
+ smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <21>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
soc-glue@5f800000 {
compatible = "operating-points-v2";
opp-shared;
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <500000>;
};
- opp@648000000 {
+ opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
clock-latency-ns = <500000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
clock-latency-ns = <500000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <500000>;
};
- opp@1188000000 {
+ opp-1188000000 {
opp-hz = /bits/ 64 <1188000000>;
clock-latency-ns = <500000>;
};
#define PPC_FEATURE2_HTM_NOSC 0x01000000
#define PPC_FEATURE2_ARCH_3_00 0x00800000 /* ISA 3.00 */
#define PPC_FEATURE2_HAS_IEEE128 0x00400000 /* VSX IEEE Binary Float 128-bit */
+#define PPC_FEATURE2_DARN 0x00200000 /* darn random number insn */
+#define PPC_FEATURE2_SCV 0x00100000 /* scv syscall */
/*
* IMPORTANT!
#define COMMON_USER_POWER9 COMMON_USER_POWER8
#define COMMON_USER2_POWER9 (COMMON_USER2_POWER8 | \
PPC_FEATURE2_ARCH_3_00 | \
- PPC_FEATURE2_HAS_IEEE128)
+ PPC_FEATURE2_HAS_IEEE128 | \
+ PPC_FEATURE2_DARN )
#ifdef CONFIG_PPC_BOOK3E_64
#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
{ .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
{ .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
{ .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
+#ifdef CONFIG_PPC_RADIX_MMU
{ .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX },
+#endif
{ .pabyte = 1, .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
{ .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
.cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
(REGION_ID(ea) != USER_REGION_ID)) {
spin_unlock(&spu->register_lock);
- ret = hash_page(ea, _PAGE_PRESENT | _PAGE_READ, 0x300, dsisr);
+ ret = hash_page(ea,
+ _PAGE_PRESENT | _PAGE_READ | _PAGE_PRIVILEGED,
+ 0x300, dsisr);
spin_lock(&spu->register_lock);
if (!ret) {
void pnv_npu2_destroy_context(struct npu_context *npu_context,
struct pci_dev *gpdev)
{
- struct pnv_phb *nphb, *phb;
+ struct pnv_phb *nphb;
struct npu *npu;
struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
struct device_node *nvlink_dn;
nphb = pci_bus_to_host(npdev->bus)->private_data;
npu = &nphb->npu;
- phb = pci_bus_to_host(gpdev->bus)->private_data;
nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
&nvlink_index)))
return;
npu_context->npdev[npu->index][nvlink_index] = NULL;
- opal_npu_destroy_context(phb->opal_id, npu_context->mm->context.id,
+ opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
PCI_DEVID(gpdev->bus->number, gpdev->devfn));
kref_put(&npu_context->kref, pnv_npu2_release_context);
}
Management" code will be disabled if you say Y here.
See also <file:Documentation/x86/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
# If '-Os' is enabled, disable it and print a warning.
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
undefine CONFIG_CC_OPTIMIZE_FOR_SIZE
- $(warning Disabling CONFIG_CC_OPTIMIZE_FOR_SIZE. Your compiler does not have -mfentry so you cannot optimize for size with CONFIG_FUNCTION_GRAPH_TRACER.)
+ $(warning Disabling CONFIG_CC_OPTIMIZE_FOR_SIZE. Your compiler does not have -mfentry so you cannot optimize for size with CONFIG_FUNCTION_GRAPH_TRACER.)
endif
endif
quiet_cmd_check_data_rel = DATAREL $@
define cmd_check_data_rel
for obj in $(filter %.o,$^); do \
- readelf -S $$obj | grep -qF .rel.local && { \
+ ${CROSS_COMPILE}readelf -S $$obj | grep -qF .rel.local && { \
echo "error: $$obj has data relocations!" >&2; \
exit 1; \
} || true; \
jmp __switch_to
END(__switch_to_asm)
+/*
+ * The unwinder expects the last frame on the stack to always be at the same
+ * offset from the end of the page, which allows it to validate the stack.
+ * Calling schedule_tail() directly would break that convention because its an
+ * asmlinkage function so its argument has to be pushed on the stack. This
+ * wrapper creates a proper "end of stack" frame header before the call.
+ */
+ENTRY(schedule_tail_wrapper)
+ FRAME_BEGIN
+
+ pushl %eax
+ call schedule_tail
+ popl %eax
+
+ FRAME_END
+ ret
+ENDPROC(schedule_tail_wrapper)
/*
* A newly forked process directly context switches into this address.
*
* edi: kernel thread arg
*/
ENTRY(ret_from_fork)
- FRAME_BEGIN /* help unwinder find end of stack */
-
- /*
- * schedule_tail() is asmlinkage so we have to put its 'prev' argument
- * on the stack.
- */
- pushl %eax
- call schedule_tail
- popl %eax
+ call schedule_tail_wrapper
testl %ebx, %ebx
jnz 1f /* kernel threads are uncommon */
2:
/* When we fork, we trace the syscall return in the child, too. */
- leal FRAME_OFFSET(%esp), %eax
+ movl %esp, %eax
call syscall_return_slowpath
- FRAME_END
jmp restore_all
/* kernel thread */
#include <asm/smap.h>
#include <asm/pgtable_types.h>
#include <asm/export.h>
-#include <asm/frame.h>
#include <linux/err.h>
.code64
* r12: kernel thread arg
*/
ENTRY(ret_from_fork)
- FRAME_BEGIN /* help unwinder find end of stack */
movq %rax, %rdi
- call schedule_tail /* rdi: 'prev' task parameter */
+ call schedule_tail /* rdi: 'prev' task parameter */
- testq %rbx, %rbx /* from kernel_thread? */
- jnz 1f /* kernel threads are uncommon */
+ testq %rbx, %rbx /* from kernel_thread? */
+ jnz 1f /* kernel threads are uncommon */
2:
- leaq FRAME_OFFSET(%rsp),%rdi /* pt_regs pointer */
+ movq %rsp, %rdi
call syscall_return_slowpath /* returns with IRQs disabled */
TRACE_IRQS_ON /* user mode is traced as IRQS on */
SWAPGS
- FRAME_END
jmp restore_regs_and_iret
1:
#endif
int mce_available(struct cpuinfo_x86 *c);
+bool mce_is_memory_error(struct mce *m);
DECLARE_PER_CPU(unsigned, mce_exception_count);
DECLARE_PER_CPU(unsigned, mce_poll_count);
memcpy(insnbuf, replacement, a->replacementlen);
insnbuf_sz = a->replacementlen;
- /* 0xe8 is a relative jump; fix the offset. */
- if (*insnbuf == 0xe8 && a->replacementlen == 5) {
+ /*
+ * 0xe8 is a relative jump; fix the offset.
+ *
+ * Instruction length is checked before the opcode to avoid
+ * accessing uninitialized bytes for zero-length replacements.
+ */
+ if (a->replacementlen == 5 && *insnbuf == 0xe8) {
*(s32 *)(insnbuf + 1) += replacement - instr;
DPRINTK("Fix CALL offset: 0x%x, CALL 0x%lx",
*(s32 *)(insnbuf + 1),
return 1;
}
-static bool memory_error(struct mce *m)
+bool mce_is_memory_error(struct mce *m)
{
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
- if (c->x86_vendor == X86_VENDOR_AMD) {
+ if (m->cpuvendor == X86_VENDOR_AMD) {
/* ErrCodeExt[20:16] */
u8 xec = (m->status >> 16) & 0x1f;
return (xec == 0x0 || xec == 0x8);
- } else if (c->x86_vendor == X86_VENDOR_INTEL) {
+ } else if (m->cpuvendor == X86_VENDOR_INTEL) {
/*
* Intel SDM Volume 3B - 15.9.2 Compound Error Codes
*
return false;
}
+EXPORT_SYMBOL_GPL(mce_is_memory_error);
static bool cec_add_mce(struct mce *m)
{
return false;
/* We eat only correctable DRAM errors with usable addresses. */
- if (memory_error(m) &&
+ if (mce_is_memory_error(m) &&
!(m->status & MCI_STATUS_UC) &&
mce_usable_address(m))
if (!cec_add_elem(m->addr >> PAGE_SHIFT))
severity = mce_severity(&m, mca_cfg.tolerant, NULL, false);
- if (severity == MCE_DEFERRED_SEVERITY && memory_error(&m))
+ if (severity == MCE_DEFERRED_SEVERITY && mce_is_memory_error(&m))
if (m.status & MCI_STATUS_ADDRV)
m.severity = severity;
{
return module_alloc(size);
}
-static inline void tramp_free(void *tramp)
+static inline void tramp_free(void *tramp, int size)
{
+ int npages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+
+ set_memory_nx((unsigned long)tramp, npages);
+ set_memory_rw((unsigned long)tramp, npages);
module_memfree(tramp);
}
#else
{
return NULL;
}
-static inline void tramp_free(void *tramp) { }
+static inline void tramp_free(void *tramp, int size) { }
#endif
/* Defined as markers to the end of the ftrace default trampolines */
/* Copy ftrace_caller onto the trampoline memory */
ret = probe_kernel_read(trampoline, (void *)start_offset, size);
if (WARN_ON(ret < 0)) {
- tramp_free(trampoline);
+ tramp_free(trampoline, *tramp_size);
return 0;
}
/* Are we pointing to the reference? */
if (WARN_ON(memcmp(op_ptr.op, op_ref, 3) != 0)) {
- tramp_free(trampoline);
+ tramp_free(trampoline, *tramp_size);
return 0;
}
unsigned long offset;
unsigned long ip;
unsigned int size;
- int ret;
+ int ret, npages;
if (ops->trampoline) {
/*
*/
if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
return;
+ npages = PAGE_ALIGN(ops->trampoline_size) >> PAGE_SHIFT;
+ set_memory_rw(ops->trampoline, npages);
} else {
ops->trampoline = create_trampoline(ops, &size);
if (!ops->trampoline)
return;
ops->trampoline_size = size;
+ npages = PAGE_ALIGN(size) >> PAGE_SHIFT;
}
offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
/* Do a safe modify in case the trampoline is executing */
new = ftrace_call_replace(ip, (unsigned long)func);
ret = update_ftrace_func(ip, new);
+ set_memory_ro(ops->trampoline, npages);
/* The update should never fail */
WARN_ON(ret);
if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
return;
- tramp_free((void *)ops->trampoline);
+ tramp_free((void *)ops->trampoline, ops->trampoline_size);
ops->trampoline = 0;
}
#include <linux/ftrace.h>
#include <linux/frame.h>
#include <linux/kasan.h>
+#include <linux/moduleloader.h>
#include <asm/text-patching.h>
#include <asm/cacheflush.h>
}
}
+/* Recover page to RW mode before releasing it */
+void free_insn_page(void *page)
+{
+ set_memory_nx((unsigned long)page & PAGE_MASK, 1);
+ set_memory_rw((unsigned long)page & PAGE_MASK, 1);
+ module_memfree(page);
+}
+
static int arch_copy_kprobe(struct kprobe *p)
{
struct insn insn;
*/
x86_configure_nx();
- simple_udelay_calibration();
-
parse_early_param();
#ifdef CONFIG_MEMORY_HOTPLUG
*/
init_hypervisor_platform();
+ simple_udelay_calibration();
+
x86_init.resources.probe_roms();
/* after parse_early_param, so could debug it */
return (unsigned long *)task_pt_regs(state->task) - 2;
}
+static bool is_last_frame(struct unwind_state *state)
+{
+ return state->bp == last_frame(state);
+}
+
#ifdef CONFIG_X86_32
#define GCC_REALIGN_WORDS 3
#else
return last_frame(state) - GCC_REALIGN_WORDS;
}
-static bool is_last_task_frame(struct unwind_state *state)
+static bool is_last_aligned_frame(struct unwind_state *state)
{
unsigned long *last_bp = last_frame(state);
unsigned long *aligned_bp = last_aligned_frame(state);
/*
- * We have to check for the last task frame at two different locations
- * because gcc can occasionally decide to realign the stack pointer and
- * change the offset of the stack frame in the prologue of a function
- * called by head/entry code. Examples:
+ * GCC can occasionally decide to realign the stack pointer and change
+ * the offset of the stack frame in the prologue of a function called
+ * by head/entry code. Examples:
*
* <start_secondary>:
* push %edi
* push %rbp
* mov %rsp,%rbp
*
- * Note that after aligning the stack, it pushes a duplicate copy of
- * the return address before pushing the frame pointer.
+ * After aligning the stack, it pushes a duplicate copy of the return
+ * address before pushing the frame pointer.
+ */
+ return (state->bp == aligned_bp && *(aligned_bp + 1) == *(last_bp + 1));
+}
+
+static bool is_last_ftrace_frame(struct unwind_state *state)
+{
+ unsigned long *last_bp = last_frame(state);
+ unsigned long *last_ftrace_bp = last_bp - 3;
+
+ /*
+ * When unwinding from an ftrace handler of a function called by entry
+ * code, the stack layout of the last frame is:
+ *
+ * bp
+ * parent ret addr
+ * bp
+ * function ret addr
+ * parent ret addr
+ * pt_regs
+ * -----------------
*/
- return (state->bp == last_bp ||
- (state->bp == aligned_bp && *(aligned_bp+1) == *(last_bp+1)));
+ return (state->bp == last_ftrace_bp &&
+ *state->bp == *(state->bp + 2) &&
+ *(state->bp + 1) == *(state->bp + 4));
+}
+
+static bool is_last_task_frame(struct unwind_state *state)
+{
+ return is_last_frame(state) || is_last_aligned_frame(state) ||
+ is_last_ftrace_frame(state);
}
/*
unsigned int i, level;
unsigned long addr;
- BUG_ON(irqs_disabled());
+ BUG_ON(irqs_disabled() && !early_boot_irqs_disabled);
WARN_ON(PAGE_ALIGN(start) != start);
on_each_cpu(__cpa_flush_range, NULL, 1);
}
early_param("nopat", nopat);
+static bool __read_mostly __pat_initialized = false;
+
bool pat_enabled(void)
{
- return !!__pat_enabled;
+ return __pat_initialized;
}
EXPORT_SYMBOL_GPL(pat_enabled);
}
wrmsrl(MSR_IA32_CR_PAT, pat);
+ __pat_initialized = true;
__init_cache_modes(pat);
}
static void pat_ap_init(u64 pat)
{
- if (!boot_cpu_has(X86_FEATURE_PAT)) {
+ if (!this_cpu_has(X86_FEATURE_PAT)) {
/*
* If this happens we are on a secondary CPU, but switched to
* PAT on the boot CPU. We have no way to undo PAT.
u64 pat;
struct cpuinfo_x86 *c = &boot_cpu_data;
- if (!pat_enabled()) {
+ if (!__pat_enabled) {
init_cache_modes();
return;
}
}
EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
-void blk_mq_abort_requeue_list(struct request_queue *q)
-{
- unsigned long flags;
- LIST_HEAD(rq_list);
-
- spin_lock_irqsave(&q->requeue_lock, flags);
- list_splice_init(&q->requeue_list, &rq_list);
- spin_unlock_irqrestore(&q->requeue_lock, flags);
-
- while (!list_empty(&rq_list)) {
- struct request *rq;
-
- rq = list_first_entry(&rq_list, struct request, queuelist);
- list_del_init(&rq->queuelist);
- blk_mq_end_request(rq, -EIO);
- }
-}
-EXPORT_SYMBOL(blk_mq_abort_requeue_list);
-
struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag)
{
if (tag < tags->nr_tags) {
goto unlock;
}
- if (q->mq_ops)
+ if (q->mq_ops) {
__blk_mq_register_dev(dev, q);
-
- blk_mq_debugfs_register(q);
+ blk_mq_debugfs_register(q);
+ }
kobject_uevent(&q->kobj, KOBJ_ADD);
#define DFL_THROTL_SLICE_HD (HZ / 10)
#define DFL_THROTL_SLICE_SSD (HZ / 50)
#define MAX_THROTL_SLICE (HZ)
-#define DFL_IDLE_THRESHOLD_SSD (1000L) /* 1 ms */
-#define DFL_IDLE_THRESHOLD_HD (100L * 1000) /* 100 ms */
#define MAX_IDLE_TIME (5L * 1000 * 1000) /* 5 s */
-/* default latency target is 0, eg, guarantee IO latency by default */
-#define DFL_LATENCY_TARGET (0)
+#define MIN_THROTL_BPS (320 * 1024)
+#define MIN_THROTL_IOPS (10)
+#define DFL_LATENCY_TARGET (-1L)
+#define DFL_IDLE_THRESHOLD (0)
#define SKIP_LATENCY (((u64)1) << BLK_STAT_RES_SHIFT)
unsigned long last_check_time;
unsigned long latency_target; /* us */
+ unsigned long latency_target_conf; /* us */
/* When did we start a new slice */
unsigned long slice_start[2];
unsigned long slice_end[2];
unsigned long checked_last_finish_time; /* ns / 1024 */
unsigned long avg_idletime; /* ns / 1024 */
unsigned long idletime_threshold; /* us */
+ unsigned long idletime_threshold_conf; /* us */
unsigned int bio_cnt; /* total bios */
unsigned int bad_bio_cnt; /* bios exceeding latency threshold */
unsigned int limit_index;
bool limit_valid[LIMIT_CNT];
- unsigned long dft_idletime_threshold; /* us */
-
unsigned long low_upgrade_time;
unsigned long low_downgrade_time;
td = tg->td;
ret = tg->bps[rw][td->limit_index];
- if (ret == 0 && td->limit_index == LIMIT_LOW)
- return tg->bps[rw][LIMIT_MAX];
+ if (ret == 0 && td->limit_index == LIMIT_LOW) {
+ /* intermediate node or iops isn't 0 */
+ if (!list_empty(&blkg->blkcg->css.children) ||
+ tg->iops[rw][td->limit_index])
+ return U64_MAX;
+ else
+ return MIN_THROTL_BPS;
+ }
if (td->limit_index == LIMIT_MAX && tg->bps[rw][LIMIT_LOW] &&
tg->bps[rw][LIMIT_LOW] != tg->bps[rw][LIMIT_MAX]) {
if (cgroup_subsys_on_dfl(io_cgrp_subsys) && !blkg->parent)
return UINT_MAX;
+
td = tg->td;
ret = tg->iops[rw][td->limit_index];
- if (ret == 0 && tg->td->limit_index == LIMIT_LOW)
- return tg->iops[rw][LIMIT_MAX];
+ if (ret == 0 && tg->td->limit_index == LIMIT_LOW) {
+ /* intermediate node or bps isn't 0 */
+ if (!list_empty(&blkg->blkcg->css.children) ||
+ tg->bps[rw][td->limit_index])
+ return UINT_MAX;
+ else
+ return MIN_THROTL_IOPS;
+ }
if (td->limit_index == LIMIT_MAX && tg->iops[rw][LIMIT_LOW] &&
tg->iops[rw][LIMIT_LOW] != tg->iops[rw][LIMIT_MAX]) {
/* LIMIT_LOW will have default value 0 */
tg->latency_target = DFL_LATENCY_TARGET;
+ tg->latency_target_conf = DFL_LATENCY_TARGET;
+ tg->idletime_threshold = DFL_IDLE_THRESHOLD;
+ tg->idletime_threshold_conf = DFL_IDLE_THRESHOLD;
return &tg->pd;
}
if (cgroup_subsys_on_dfl(io_cgrp_subsys) && blkg->parent)
sq->parent_sq = &blkg_to_tg(blkg->parent)->service_queue;
tg->td = td;
-
- tg->idletime_threshold = td->dft_idletime_threshold;
}
/*
return 0;
}
-static void tg_conf_updated(struct throtl_grp *tg)
+static void tg_conf_updated(struct throtl_grp *tg, bool global)
{
struct throtl_service_queue *sq = &tg->service_queue;
struct cgroup_subsys_state *pos_css;
* restrictions in the whole hierarchy and allows them to bypass
* blk-throttle.
*/
- blkg_for_each_descendant_pre(blkg, pos_css, tg_to_blkg(tg))
- tg_update_has_rules(blkg_to_tg(blkg));
+ blkg_for_each_descendant_pre(blkg, pos_css,
+ global ? tg->td->queue->root_blkg : tg_to_blkg(tg)) {
+ struct throtl_grp *this_tg = blkg_to_tg(blkg);
+ struct throtl_grp *parent_tg;
+
+ tg_update_has_rules(this_tg);
+ /* ignore root/second level */
+ if (!cgroup_subsys_on_dfl(io_cgrp_subsys) || !blkg->parent ||
+ !blkg->parent->parent)
+ continue;
+ parent_tg = blkg_to_tg(blkg->parent);
+ /*
+ * make sure all children has lower idle time threshold and
+ * higher latency target
+ */
+ this_tg->idletime_threshold = min(this_tg->idletime_threshold,
+ parent_tg->idletime_threshold);
+ this_tg->latency_target = max(this_tg->latency_target,
+ parent_tg->latency_target);
+ }
/*
* We're already holding queue_lock and know @tg is valid. Let's
else
*(unsigned int *)((void *)tg + of_cft(of)->private) = v;
- tg_conf_updated(tg);
+ tg_conf_updated(tg, false);
ret = 0;
out_finish:
blkg_conf_finish(&ctx);
tg->iops_conf[READ][off] == iops_dft &&
tg->iops_conf[WRITE][off] == iops_dft &&
(off != LIMIT_LOW ||
- (tg->idletime_threshold == tg->td->dft_idletime_threshold &&
- tg->latency_target == DFL_LATENCY_TARGET)))
+ (tg->idletime_threshold_conf == DFL_IDLE_THRESHOLD &&
+ tg->latency_target_conf == DFL_LATENCY_TARGET)))
return 0;
- if (tg->bps_conf[READ][off] != bps_dft)
+ if (tg->bps_conf[READ][off] != U64_MAX)
snprintf(bufs[0], sizeof(bufs[0]), "%llu",
tg->bps_conf[READ][off]);
- if (tg->bps_conf[WRITE][off] != bps_dft)
+ if (tg->bps_conf[WRITE][off] != U64_MAX)
snprintf(bufs[1], sizeof(bufs[1]), "%llu",
tg->bps_conf[WRITE][off]);
- if (tg->iops_conf[READ][off] != iops_dft)
+ if (tg->iops_conf[READ][off] != UINT_MAX)
snprintf(bufs[2], sizeof(bufs[2]), "%u",
tg->iops_conf[READ][off]);
- if (tg->iops_conf[WRITE][off] != iops_dft)
+ if (tg->iops_conf[WRITE][off] != UINT_MAX)
snprintf(bufs[3], sizeof(bufs[3]), "%u",
tg->iops_conf[WRITE][off]);
if (off == LIMIT_LOW) {
- if (tg->idletime_threshold == ULONG_MAX)
+ if (tg->idletime_threshold_conf == ULONG_MAX)
strcpy(idle_time, " idle=max");
else
snprintf(idle_time, sizeof(idle_time), " idle=%lu",
- tg->idletime_threshold);
+ tg->idletime_threshold_conf);
- if (tg->latency_target == ULONG_MAX)
+ if (tg->latency_target_conf == ULONG_MAX)
strcpy(latency_time, " latency=max");
else
snprintf(latency_time, sizeof(latency_time),
- " latency=%lu", tg->latency_target);
+ " latency=%lu", tg->latency_target_conf);
}
seq_printf(sf, "%s rbps=%s wbps=%s riops=%s wiops=%s%s%s\n",
v[2] = tg->iops_conf[READ][index];
v[3] = tg->iops_conf[WRITE][index];
- idle_time = tg->idletime_threshold;
- latency_time = tg->latency_target;
+ idle_time = tg->idletime_threshold_conf;
+ latency_time = tg->latency_target_conf;
while (true) {
char tok[27]; /* wiops=18446744073709551616 */
char *p;
tg->iops_conf[READ][LIMIT_MAX]);
tg->iops[WRITE][LIMIT_LOW] = min(tg->iops_conf[WRITE][LIMIT_LOW],
tg->iops_conf[WRITE][LIMIT_MAX]);
+ tg->idletime_threshold_conf = idle_time;
+ tg->latency_target_conf = latency_time;
+
+ /* force user to configure all settings for low limit */
+ if (!(tg->bps[READ][LIMIT_LOW] || tg->iops[READ][LIMIT_LOW] ||
+ tg->bps[WRITE][LIMIT_LOW] || tg->iops[WRITE][LIMIT_LOW]) ||
+ tg->idletime_threshold_conf == DFL_IDLE_THRESHOLD ||
+ tg->latency_target_conf == DFL_LATENCY_TARGET) {
+ tg->bps[READ][LIMIT_LOW] = 0;
+ tg->bps[WRITE][LIMIT_LOW] = 0;
+ tg->iops[READ][LIMIT_LOW] = 0;
+ tg->iops[WRITE][LIMIT_LOW] = 0;
+ tg->idletime_threshold = DFL_IDLE_THRESHOLD;
+ tg->latency_target = DFL_LATENCY_TARGET;
+ } else if (index == LIMIT_LOW) {
+ tg->idletime_threshold = tg->idletime_threshold_conf;
+ tg->latency_target = tg->latency_target_conf;
+ }
- if (index == LIMIT_LOW) {
- blk_throtl_update_limit_valid(tg->td);
- if (tg->td->limit_valid[LIMIT_LOW])
+ blk_throtl_update_limit_valid(tg->td);
+ if (tg->td->limit_valid[LIMIT_LOW]) {
+ if (index == LIMIT_LOW)
tg->td->limit_index = LIMIT_LOW;
- tg->idletime_threshold = (idle_time == ULONG_MAX) ?
- ULONG_MAX : idle_time;
- tg->latency_target = (latency_time == ULONG_MAX) ?
- ULONG_MAX : latency_time;
- }
- tg_conf_updated(tg);
+ } else
+ tg->td->limit_index = LIMIT_MAX;
+ tg_conf_updated(tg, index == LIMIT_LOW &&
+ tg->td->limit_valid[LIMIT_LOW]);
ret = 0;
out_finish:
blkg_conf_finish(&ctx);
/*
* cgroup is idle if:
* - single idle is too long, longer than a fixed value (in case user
- * configure a too big threshold) or 4 times of slice
+ * configure a too big threshold) or 4 times of idletime threshold
* - average think time is more than threshold
* - IO latency is largely below threshold
*/
- unsigned long time = jiffies_to_usecs(4 * tg->td->throtl_slice);
-
- time = min_t(unsigned long, MAX_IDLE_TIME, time);
- return (ktime_get_ns() >> 10) - tg->last_finish_time > time ||
- tg->avg_idletime > tg->idletime_threshold ||
- (tg->latency_target && tg->bio_cnt &&
+ unsigned long time;
+ bool ret;
+
+ time = min_t(unsigned long, MAX_IDLE_TIME, 4 * tg->idletime_threshold);
+ ret = tg->latency_target == DFL_LATENCY_TARGET ||
+ tg->idletime_threshold == DFL_IDLE_THRESHOLD ||
+ (ktime_get_ns() >> 10) - tg->last_finish_time > time ||
+ tg->avg_idletime > tg->idletime_threshold ||
+ (tg->latency_target && tg->bio_cnt &&
tg->bad_bio_cnt * 5 < tg->bio_cnt);
+ throtl_log(&tg->service_queue,
+ "avg_idle=%ld, idle_threshold=%ld, bad_bio=%d, total_bio=%d, is_idle=%d, scale=%d",
+ tg->avg_idletime, tg->idletime_threshold, tg->bad_bio_cnt,
+ tg->bio_cnt, ret, tg->td->scale);
+ return ret;
}
static bool throtl_tg_can_upgrade(struct throtl_grp *tg)
struct cgroup_subsys_state *pos_css;
struct blkcg_gq *blkg;
+ throtl_log(&td->service_queue, "upgrade to max");
td->limit_index = LIMIT_MAX;
td->low_upgrade_time = jiffies;
td->scale = 0;
{
td->scale /= 2;
+ throtl_log(&td->service_queue, "downgrade, scale %d", td->scale);
if (td->scale) {
td->low_upgrade_time = jiffies - td->scale * td->throtl_slice;
return;
td->avg_buckets[i].valid = true;
last_latency = td->avg_buckets[i].latency;
}
+
+ for (i = 0; i < LATENCY_BUCKET_SIZE; i++)
+ throtl_log(&td->service_queue,
+ "Latency bucket %d: latency=%ld, valid=%d", i,
+ td->avg_buckets[i].latency, td->avg_buckets[i].valid);
}
#else
static inline void throtl_update_latency_buckets(struct throtl_data *td)
void blk_throtl_register_queue(struct request_queue *q)
{
struct throtl_data *td;
- struct cgroup_subsys_state *pos_css;
- struct blkcg_gq *blkg;
td = q->td;
BUG_ON(!td);
- if (blk_queue_nonrot(q)) {
+ if (blk_queue_nonrot(q))
td->throtl_slice = DFL_THROTL_SLICE_SSD;
- td->dft_idletime_threshold = DFL_IDLE_THRESHOLD_SSD;
- } else {
+ else
td->throtl_slice = DFL_THROTL_SLICE_HD;
- td->dft_idletime_threshold = DFL_IDLE_THRESHOLD_HD;
- }
#ifndef CONFIG_BLK_DEV_THROTTLING_LOW
/* if no low limit, use previous default */
td->throtl_slice = DFL_THROTL_SLICE_HD;
td->track_bio_latency = !q->mq_ops && !q->request_fn;
if (!td->track_bio_latency)
blk_stat_enable_accounting(q);
-
- /*
- * some tg are created before queue is fully initialized, eg, nonrot
- * isn't initialized yet
- */
- rcu_read_lock();
- blkg_for_each_descendant_post(blkg, pos_css, q->root_blkg) {
- struct throtl_grp *tg = blkg_to_tg(blkg);
-
- tg->idletime_threshold = td->dft_idletime_threshold;
- }
- rcu_read_unlock();
}
#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
if (info) {
struct partition_meta_info *pinfo = alloc_part_info(disk);
- if (!pinfo)
+ if (!pinfo) {
+ err = -ENOMEM;
goto out_free_stats;
+ }
memcpy(pinfo, info, sizeof(*info));
p->info = pinfo;
}
continue;
bsd_start = le32_to_cpu(p->p_offset);
bsd_size = le32_to_cpu(p->p_size);
+ if (memcmp(flavour, "bsd\0", 4) == 0)
+ bsd_start += offset;
if (offset == bsd_start && size == bsd_size)
/* full parent partition, we have it already */
continue;
return 0;
}
+static int skcipher_setkey_unaligned(struct crypto_skcipher *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+ struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+ u8 *buffer, *alignbuffer;
+ unsigned long absize;
+ int ret;
+
+ absize = keylen + alignmask;
+ buffer = kmalloc(absize, GFP_ATOMIC);
+ if (!buffer)
+ return -ENOMEM;
+
+ alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
+ memcpy(alignbuffer, key, keylen);
+ ret = cipher->setkey(tfm, alignbuffer, keylen);
+ kzfree(buffer);
+ return ret;
+}
+
+static int skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+ unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+
+ if (keylen < cipher->min_keysize || keylen > cipher->max_keysize) {
+ crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ if ((unsigned long)key & alignmask)
+ return skcipher_setkey_unaligned(tfm, key, keylen);
+
+ return cipher->setkey(tfm, key, keylen);
+}
+
static void crypto_skcipher_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_skcipher *skcipher = __crypto_skcipher_cast(tfm);
tfm->__crt_alg->cra_type == &crypto_givcipher_type)
return crypto_init_skcipher_ops_ablkcipher(tfm);
- skcipher->setkey = alg->setkey;
+ skcipher->setkey = skcipher_setkey;
skcipher->encrypt = alg->encrypt;
skcipher->decrypt = alg->decrypt;
skcipher->ivsize = alg->ivsize;
#define ACPI_BUTTON_LID_INIT_IGNORE 0x00
#define ACPI_BUTTON_LID_INIT_OPEN 0x01
+#define ACPI_BUTTON_LID_INIT_METHOD 0x02
#define _COMPONENT ACPI_BUTTON_COMPONENT
ACPI_MODULE_NAME("button");
case ACPI_BUTTON_LID_INIT_OPEN:
(void)acpi_lid_notify_state(device, 1);
break;
+ case ACPI_BUTTON_LID_INIT_METHOD:
+ (void)acpi_lid_update_state(device);
+ break;
case ACPI_BUTTON_LID_INIT_IGNORE:
default:
break;
if (!strncmp(val, "open", sizeof("open") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
pr_info("Notify initial lid state as open\n");
+ } else if (!strncmp(val, "method", sizeof("method") - 1)) {
+ lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+ pr_info("Notify initial lid state with _LID return value\n");
} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
pr_info("Do not notify initial lid state\n");
switch (lid_init_state) {
case ACPI_BUTTON_LID_INIT_OPEN:
return sprintf(buffer, "open");
+ case ACPI_BUTTON_LID_INIT_METHOD:
+ return sprintf(buffer, "method");
case ACPI_BUTTON_LID_INIT_IGNORE:
return sprintf(buffer, "ignore");
default:
struct nfit_spa *nfit_spa;
/* We only care about memory errors */
- if (!(mce->status & MCACOD))
+ if (!mce_is_memory_error(mce))
return NOTIFY_DONE;
/*
/**
* wakup_source_activate - Mark given wakeup source as active.
* @ws: Wakeup source to handle.
- * @hard: If set, abort suspends in progress and wake up from suspend-to-idle.
*
* Update the @ws' statistics and, if @ws has just been activated, notify the PM
* core of the event by incrementing the counter of of wakeup events being
* processed.
*/
-static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
+static void wakeup_source_activate(struct wakeup_source *ws)
{
unsigned int cec;
"unregistered wakeup source\n"))
return;
- if (hard)
- pm_system_wakeup();
-
ws->active = true;
ws->active_count++;
ws->last_time = ktime_get();
ws->wakeup_count++;
if (!ws->active)
- wakeup_source_activate(ws, hard);
+ wakeup_source_activate(ws);
+
+ if (hard)
+ pm_system_wakeup();
}
/**
If in doubt, say N.
+config ARM_DB8500_CPUFREQ
+ tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
+ default ARCH_U8500
+ depends on HAS_IOMEM
+ depends on !CPU_THERMAL || THERMAL
+ help
+ This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
+ series.
+
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
-obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
+obj-$(CONFIG_ARM_DB8500_CPUFREQ) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
if (sscanf(name, "dump-type%u-%u-%d-%lu-%c",
&record->type, &part, &cnt, &time, &data_type) == 5) {
record->id = generic_id(time, part, cnt);
+ record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
} else if (sscanf(name, "dump-type%u-%u-%d-%lu",
&record->type, &part, &cnt, &time) == 4) {
record->id = generic_id(time, part, cnt);
+ record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
* multiple logs, remains.
*/
record->id = generic_id(time, part, 0);
+ record->part = part;
record->count = 0;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
int i, ret = 0;
+ record->time.tv_sec = get_seconds();
+ record->time.tv_nsec = 0;
+
+ record->id = generic_id(record->time.tv_sec, record->part,
+ record->count);
+
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu-%c",
record->type, record->part, record->count,
- get_seconds(), record->compressed ? 'C' : 'D');
+ record->time.tv_sec, record->compressed ? 'C' : 'D');
for (i = 0; i < DUMP_NAME_LEN; i++)
efi_name[i] = name[i];
if (record->reason == KMSG_DUMP_OOPS)
efivar_run_worker();
- record->id = record->part;
return ret;
};
* holding multiple logs, remains.
*/
snprintf(name_old, sizeof(name_old), "dump-type%u-%u-%lu",
- ed->record->type, (unsigned int)ed->record->id,
+ ed->record->type, ed->record->part,
ed->record->time.tv_sec);
for (i = 0; i < DUMP_NAME_LEN; i++)
char name[DUMP_NAME_LEN];
efi_char16_t efi_name[DUMP_NAME_LEN];
int found, i;
- unsigned int part;
- do_div(record->id, 1000);
- part = do_div(record->id, 100);
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu",
record->type, record->part, record->count,
record->time.tv_sec);
void amdgpu_fbdev_restore_mode(struct amdgpu_device *adev)
{
- struct amdgpu_fbdev *afbdev = adev->mode_info.rfbdev;
+ struct amdgpu_fbdev *afbdev;
struct drm_fb_helper *fb_helper;
int ret;
+ if (!adev)
+ return;
+
+ afbdev = adev->mode_info.rfbdev;
+
if (!afbdev)
return;
mutex_unlock(&id_mgr->lock);
}
- if (gds_switch_needed) {
+ if (ring->funcs->emit_gds_switch && gds_switch_needed) {
id->gds_base = job->gds_base;
id->gds_size = job->gds_size;
id->gws_base = job->gws_base;
struct amdgpu_vm_id_manager *id_mgr = &adev->vm_manager.id_mgr[vmhub];
struct amdgpu_vm_id *id = &id_mgr->ids[vmid];
+ atomic64_set(&id->owner, 0);
id->gds_base = 0;
id->gds_size = 0;
id->gws_base = 0;
id->oa_size = 0;
}
+/**
+ * amdgpu_vm_reset_all_id - reset VMID to zero
+ *
+ * @adev: amdgpu device structure
+ *
+ * Reset VMID to force flush on next use
+ */
+void amdgpu_vm_reset_all_ids(struct amdgpu_device *adev)
+{
+ unsigned i, j;
+
+ for (i = 0; i < AMDGPU_MAX_VMHUBS; ++i) {
+ struct amdgpu_vm_id_manager *id_mgr =
+ &adev->vm_manager.id_mgr[i];
+
+ for (j = 1; j < id_mgr->num_ids; ++j)
+ amdgpu_vm_reset_id(adev, i, j);
+ }
+}
+
/**
* amdgpu_vm_bo_find - find the bo_va for a specific vm & bo
*
for (i = 0; i < AMDGPU_MAX_RINGS; ++i)
adev->vm_manager.seqno[i] = 0;
-
atomic_set(&adev->vm_manager.vm_pte_next_ring, 0);
atomic64_set(&adev->vm_manager.client_counter, 0);
spin_lock_init(&adev->vm_manager.prt_lock);
int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job);
void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vmhub,
unsigned vmid);
+void amdgpu_vm_reset_all_ids(struct amdgpu_device *adev);
int amdgpu_vm_update_directories(struct amdgpu_device *adev,
struct amdgpu_vm *vm);
int amdgpu_vm_clear_freed(struct amdgpu_device *adev,
u32 vblank_time = amdgpu_dpm_get_vblank_time(adev);
u32 switch_limit = adev->mc.vram_type == AMDGPU_VRAM_TYPE_GDDR5 ? 450 : 300;
+ /* disable mclk switching if the refresh is >120Hz, even if the
+ * blanking period would allow it
+ */
+ if (amdgpu_dpm_get_vrefresh(adev) > 120)
+ return true;
+
if (vblank_time < switch_limit)
return true;
else
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- if (adev->vm_manager.enabled) {
- gmc_v6_0_vm_fini(adev);
- adev->vm_manager.enabled = false;
- }
gmc_v6_0_hw_fini(adev);
return 0;
if (r)
return r;
- if (!adev->vm_manager.enabled) {
- r = gmc_v6_0_vm_init(adev);
- if (r) {
- dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
- return r;
- }
- adev->vm_manager.enabled = true;
- }
+ amdgpu_vm_reset_all_ids(adev);
- return r;
+ return 0;
}
static bool gmc_v6_0_is_idle(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- if (adev->vm_manager.enabled) {
- gmc_v7_0_vm_fini(adev);
- adev->vm_manager.enabled = false;
- }
gmc_v7_0_hw_fini(adev);
return 0;
if (r)
return r;
- if (!adev->vm_manager.enabled) {
- r = gmc_v7_0_vm_init(adev);
- if (r) {
- dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
- return r;
- }
- adev->vm_manager.enabled = true;
- }
+ amdgpu_vm_reset_all_ids(adev);
- return r;
+ return 0;
}
static bool gmc_v7_0_is_idle(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- if (adev->vm_manager.enabled) {
- gmc_v8_0_vm_fini(adev);
- adev->vm_manager.enabled = false;
- }
gmc_v8_0_hw_fini(adev);
return 0;
if (r)
return r;
- if (!adev->vm_manager.enabled) {
- r = gmc_v8_0_vm_init(adev);
- if (r) {
- dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
- return r;
- }
- adev->vm_manager.enabled = true;
- }
+ amdgpu_vm_reset_all_ids(adev);
- return r;
+ return 0;
}
static bool gmc_v8_0_is_idle(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- if (adev->vm_manager.enabled) {
- gmc_v9_0_vm_fini(adev);
- adev->vm_manager.enabled = false;
- }
gmc_v9_0_hw_fini(adev);
return 0;
if (r)
return r;
- if (!adev->vm_manager.enabled) {
- r = gmc_v9_0_vm_init(adev);
- if (r) {
- dev_err(adev->dev,
- "vm manager initialization failed (%d).\n", r);
- return r;
- }
- adev->vm_manager.enabled = true;
- }
+ amdgpu_vm_reset_all_ids(adev);
- return r;
+ return 0;
}
static bool gmc_v9_0_is_idle(void *handle)
return sizeof(struct smu7_power_state);
}
+static int smu7_vblank_too_short(struct pp_hwmgr *hwmgr,
+ uint32_t vblank_time_us)
+{
+ struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
+ uint32_t switch_limit_us;
+
+ switch (hwmgr->chip_id) {
+ case CHIP_POLARIS10:
+ case CHIP_POLARIS11:
+ case CHIP_POLARIS12:
+ switch_limit_us = data->is_memory_gddr5 ? 190 : 150;
+ break;
+ default:
+ switch_limit_us = data->is_memory_gddr5 ? 450 : 150;
+ break;
+ }
+
+ if (vblank_time_us < switch_limit_us)
+ return true;
+ else
+ return false;
+}
static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
struct pp_power_state *request_ps,
bool disable_mclk_switching;
bool disable_mclk_switching_for_frame_lock;
struct cgs_display_info info = {0};
+ struct cgs_mode_info mode_info = {0};
const struct phm_clock_and_voltage_limits *max_limits;
uint32_t i;
struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
int32_t count;
int32_t stable_pstate_sclk = 0, stable_pstate_mclk = 0;
+ info.mode_info = &mode_info;
data->battery_state = (PP_StateUILabel_Battery ==
request_ps->classification.ui_label);
cgs_get_active_displays_info(hwmgr->device, &info);
- /*TO DO result = PHM_CheckVBlankTime(hwmgr, &vblankTooShort);*/
-
minimum_clocks.engineClock = hwmgr->display_config.min_core_set_clock;
minimum_clocks.memoryClock = hwmgr->display_config.min_mem_set_clock;
PHM_PlatformCaps_DisableMclkSwitchingForFrameLock);
- disable_mclk_switching = (1 < info.display_count) ||
- disable_mclk_switching_for_frame_lock;
+ disable_mclk_switching = ((1 < info.display_count) ||
+ disable_mclk_switching_for_frame_lock ||
+ smu7_vblank_too_short(hwmgr, mode_info.vblank_time_us) ||
+ (mode_info.refresh_rate > 120));
sclk = smu7_ps->performance_levels[0].engine_clock;
mclk = smu7_ps->performance_levels[0].memory_clock;
enum pp_clock_type type, uint32_t mask)
{
struct vega10_hwmgr *data = (struct vega10_hwmgr *)(hwmgr->backend);
- uint32_t i;
+ int i;
if (hwmgr->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL)
return -EINVAL;
}
out:
- if (ret && crtc->funcs->page_flip_target)
- drm_crtc_vblank_put(crtc);
if (fb)
drm_framebuffer_put(fb);
if (crtc->primary->old_fb)
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
+ if (ret && crtc->funcs->page_flip_target)
+ drm_crtc_vblank_put(crtc);
+
return ret;
}
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
+ DRM_DEBUG_KMS("Using mode from DDC\n");
goto out; /* FIXME: check for quirks */
}
}
/* Failed to get EDID, what about VBT? do we need this? */
- if (mode_dev->vbt_mode)
+ if (dev_priv->lfp_lvds_vbt_mode) {
mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, mode_dev->vbt_mode);
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
- if (!mode_dev->panel_fixed_mode)
- if (dev_priv->lfp_lvds_vbt_mode)
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev,
- dev_priv->lfp_lvds_vbt_mode);
+ if (mode_dev->panel_fixed_mode) {
+ mode_dev->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ DRM_DEBUG_KMS("Using mode from VBT\n");
+ goto out;
+ }
+ }
/*
* If we didn't get EDID, try checking if the panel is already turned
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
+ DRM_DEBUG_KMS("Using pre-programmed mode\n");
goto out; /* FIXME: check for quirks */
}
}
if (ret)
return;
- cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
-
if (fb != old_state->fb) {
obj = to_qxl_framebuffer(fb)->obj;
user_bo = gem_to_qxl_bo(obj);
qxl_bo_kunmap(cursor_bo);
qxl_bo_kunmap(user_bo);
+ cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
cmd->u.set.visible = 1;
cmd->u.set.shape = qxl_bo_physical_address(qdev,
cursor_bo, 0);
if (ret)
goto out_free_release;
+ cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
cmd->type = QXL_CURSOR_MOVE;
}
u32 vblank_time = r600_dpm_get_vblank_time(rdev);
u32 switch_limit = pi->mem_gddr5 ? 450 : 300;
+ /* disable mclk switching if the refresh is >120Hz, even if the
+ * blanking period would allow it
+ */
+ if (r600_dpm_get_vrefresh(rdev) > 120)
+ return true;
+
if (vblank_time < switch_limit)
return true;
else
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.cik.disp_int_cont5 & DC_HPD6_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.cik.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_RX_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_RX_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.r600.disp_int_cont2 & DC_HPD6_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
if ((radeon_runtime_pm != 0) &&
radeon_has_atpx() &&
((flags & RADEON_IS_IGP) == 0) &&
- !pci_is_thunderbolt_attached(rdev->pdev))
+ !pci_is_thunderbolt_attached(dev->pdev))
flags |= RADEON_IS_PX;
/* radeon_device_init should report only fatal error
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
WREG32(DC_HPD5_INT_CONTROL, tmp);
}
if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
- tmp = RREG32(DC_HPD5_INT_CONTROL);
+ tmp = RREG32(DC_HPD6_INT_CONTROL);
tmp |= DC_HPDx_RX_INT_ACK;
WREG32(DC_HPD6_INT_CONTROL, tmp);
}
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
const struct acpi_device_id *id;
- u32 ss_ht, fp_ht, hs_ht, fs_ht;
struct acpi_device *adev;
const char *uid;
int value, int index, void *data, int len)
{
struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+ void *dmadata = kmalloc(len, GFP_KERNEL);
+ int ret;
+
+ if (!dmadata)
+ return -ENOMEM;
/* do control transfer */
- return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+ ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
- USB_DIR_IN, value, index, data, len, 2000);
+ USB_DIR_IN, value, index, dmadata, len, 2000);
+
+ memcpy(data, dmadata, len);
+ kfree(dmadata);
+ return ret;
}
static int usb_write(struct i2c_adapter *adapter, int cmd,
int value, int index, void *data, int len)
{
struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+ void *dmadata = kmemdup(data, len, GFP_KERNEL);
+ int ret;
+
+ if (!dmadata)
+ return -ENOMEM;
/* do control transfer */
- return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+ ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value, index, data, len, 2000);
+ value, index, dmadata, len, 2000);
+
+ kfree(dmadata);
+ return ret;
}
static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)
struct completion *completion)
{
struct device *dev = &client->dev;
- long ret;
int error;
int len;
- u8 buffer[ETP_I2C_INF_LENGTH];
+ u8 buffer[ETP_I2C_REPORT_LEN];
+
+ len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_LEN);
+ if (len != ETP_I2C_REPORT_LEN) {
+ error = len < 0 ? len : -EIO;
+ dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n",
+ error, len);
+ }
reinit_completion(completion);
enable_irq(client->irq);
error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET);
- if (!error)
- ret = wait_for_completion_interruptible_timeout(completion,
- msecs_to_jiffies(300));
- disable_irq(client->irq);
-
if (error) {
dev_err(dev, "device reset failed: %d\n", error);
- return error;
- } else if (ret == 0) {
+ } else if (!wait_for_completion_timeout(completion,
+ msecs_to_jiffies(300))) {
dev_err(dev, "timeout waiting for device reset\n");
- return -ETIMEDOUT;
- } else if (ret < 0) {
- error = ret;
- dev_err(dev, "error waiting for device reset: %d\n", error);
- return error;
+ error = -ETIMEDOUT;
}
+ disable_irq(client->irq);
+
+ if (error)
+ return error;
+
len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH);
if (len != ETP_I2C_INF_LENGTH) {
error = len < 0 ? len : -EIO;
case MXT_TOUCH_KEYARRAY_T15:
case MXT_TOUCH_PROXIMITY_T23:
case MXT_TOUCH_PROXKEY_T52:
+ case MXT_TOUCH_MULTITOUCHSCREEN_T100:
case MXT_PROCI_GRIPFACE_T20:
case MXT_PROCG_NOISE_T22:
case MXT_PROCI_ONETOUCH_T24:
static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
M09_REGISTER_OFFSET, 0, 31);
static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
- M09_REGISTER_THRESHOLD, 20, 80);
+ M09_REGISTER_THRESHOLD, 0, 80);
static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
NO_REGISTER, 3, 14);
"slave address 0x%02x\n",
client->name, chip->bits, client->addr);
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
if (pdata) {
struct mmc_pwrseq pwrseq;
bool clk_enabled;
u32 post_power_on_delay_ms;
+ u32 power_off_delay_us;
struct clk *ext_clk;
struct gpio_descs *reset_gpios;
};
mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
+ if (pwrseq->power_off_delay_us)
+ usleep_range(pwrseq->power_off_delay_us,
+ 2 * pwrseq->power_off_delay_us);
+
if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) {
clk_disable_unprepare(pwrseq->ext_clk);
pwrseq->clk_enabled = false;
device_property_read_u32(dev, "post-power-on-delay-ms",
&pwrseq->post_power_on_delay_ms);
+ device_property_read_u32(dev, "power-off-delay-us",
+ &pwrseq->power_off_delay_us);
pwrseq->pwrseq.dev = dev;
pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
static void octeon_mmc_int_enable(struct cvm_mmc_host *host, u64 val)
{
writeq(val, host->base + MIO_EMM_INT(host));
- if (!host->dma_active || (host->dma_active && !host->has_ciu3))
+ if (!host->has_ciu3)
writeq(val, host->base + MIO_EMM_INT_EN(host));
}
}
host->global_pwr_gpiod = devm_gpiod_get_optional(&pdev->dev,
- "power-gpios",
+ "power",
GPIOD_OUT_HIGH);
if (IS_ERR(host->global_pwr_gpiod)) {
dev_err(&pdev->dev, "Invalid power GPIO\n");
if (ret) {
dev_err(&pdev->dev, "Error populating slots\n");
octeon_mmc_set_shared_power(host, 0);
- return ret;
+ goto error;
}
i++;
}
return 0;
+
+error:
+ for (i = 0; i < CAVIUM_MAX_MMC; i++) {
+ if (host->slot[i])
+ cvm_mmc_of_slot_remove(host->slot[i]);
+ if (host->slot_pdev[i])
+ of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL);
+ }
+ return ret;
}
static int octeon_mmc_remove(struct platform_device *pdev)
return 0;
error:
+ for (i = 0; i < CAVIUM_MAX_MMC; i++) {
+ if (host->slot[i])
+ cvm_mmc_of_slot_remove(host->slot[i]);
+ if (host->slot_pdev[i])
+ of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL);
+ }
clk_disable_unprepare(host->clk);
return ret;
}
cvm_mmc_reset_bus(slot);
if (host->global_pwr_gpiod)
host->set_shared_power(host, 0);
- else
+ else if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
break;
case MMC_POWER_UP:
if (host->global_pwr_gpiod)
host->set_shared_power(host, 1);
- else
+ else if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
break;
}
return -EINVAL;
}
- mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
- if (IS_ERR(mmc->supply.vmmc)) {
- if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- /*
- * Legacy Octeon firmware has no regulator entry, fall-back to
- * a hard-coded voltage to get a sane OCR.
- */
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ /*
+ * Legacy Octeon firmware has no regulator entry, fall-back to
+ * a hard-coded voltage to get a sane OCR.
+ */
+ if (IS_ERR(mmc->supply.vmmc))
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- } else {
- ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
- if (ret > 0)
- mmc->ocr_avail = ret;
- }
/* Common MMC bindings */
ret = mmc_of_parse(mmc);
};
static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
- .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+ .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
.ops = &sdhci_iproc_ops,
};
return ret;
}
-void xenon_clean_phy(struct sdhci_host *host)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
-
- kfree(priv->phy_params);
-}
-
static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
const char *phy_name)
{
if (ret)
return ret;
- ret = xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
- if (ret)
- xenon_clean_phy(host);
-
- return ret;
+ return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
}
int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
err = xenon_sdhc_prepare(host);
if (err)
- goto clean_phy_param;
+ goto err_clk;
err = sdhci_add_host(host);
if (err)
remove_sdhc:
xenon_sdhc_unprepare(host);
-clean_phy_param:
- xenon_clean_phy(host);
err_clk:
clk_disable_unprepare(pltfm_host->clk);
free_pltfm:
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- xenon_clean_phy(host);
-
sdhci_remove_host(host, 0);
xenon_sdhc_unprepare(host);
};
int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
-void xenon_clean_phy(struct sdhci_host *host);
int xenon_phy_parse_dt(struct device_node *np,
struct sdhci_host *host);
void xenon_soc_pad_ctrl(struct sdhci_host *host,
return -1;
ad_info->aggregator_id = aggregator->aggregator_identifier;
- ad_info->ports = aggregator->num_of_ports;
+ ad_info->ports = __agg_active_ports(aggregator);
ad_info->actor_key = aggregator->actor_oper_aggregator_key;
ad_info->partner_key = aggregator->partner_oper_aggregator_key;
ether_addr_copy(ad_info->partner_system,
bond_for_each_slave_rcu(bond, slave, iter) {
unsigned long trans_start = dev_trans_start(slave->dev);
+ slave->new_link = BOND_LINK_NOCHANGE;
+
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, trans_start, 1) &&
bond_time_in_interval(bond, slave->last_rx, 1)) {
- slave->link = BOND_LINK_UP;
+ slave->new_link = BOND_LINK_UP;
slave_state_changed = 1;
/* primary_slave has no meaning in round-robin
if (!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, slave->last_rx, 2)) {
- slave->link = BOND_LINK_DOWN;
+ slave->new_link = BOND_LINK_DOWN;
slave_state_changed = 1;
if (slave->link_failure_count < UINT_MAX)
if (!rtnl_trylock())
goto re_arm;
+ bond_for_each_slave(bond, slave, iter) {
+ if (slave->new_link != BOND_LINK_NOCHANGE)
+ slave->link = slave->new_link;
+ }
+
if (slave_state_changed) {
bond_slave_state_change(bond);
if (BOND_MODE(bond) == BOND_MODE_XOR)
int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
struct bond_opt_value newval;
const struct bond_opt_value *valptr;
- int arp_all_targets_value;
+ int arp_all_targets_value = 0;
u16 ad_actor_sys_prio = 0;
u16 ad_user_port_key = 0;
- __be32 arp_target[BOND_MAX_ARP_TARGETS];
+ __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
int arp_ip_count;
int bond_mode = BOND_MODE_ROUNDROBIN;
int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
arp_validate_value = 0;
}
- arp_all_targets_value = 0;
if (arp_all_targets) {
bond_opt_initstr(&newval, arp_all_targets);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
ret = ax_mii_init(dev);
if (ret)
- goto out_irq;
+ goto err_out;
ax_NS8390_init(dev, 0);
ret = register_netdev(dev);
if (ret)
- goto out_irq;
+ goto err_out;
netdev_info(dev, "%dbit, irq %d, %lx, MAC: %pM\n",
ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
return 0;
- out_irq:
- /* cleanup irq */
- free_irq(dev->irq, dev);
err_out:
return ret;
}
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
+ err = -EIO;
goto err_dma;
}
* pcibios_set_master to do the needed arch specific settings */
pci_set_master(pdev);
- err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct atl2_adapter));
- if (!netdev)
+ if (!netdev) {
+ err = -ENOMEM;
goto err_alloc_etherdev;
+ }
SET_NETDEV_DEV(netdev, &pdev->dev);
if (err)
goto err_sw_init;
- err = -EIO;
-
netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX;
netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
struct be_adapter *adapter = netdev_priv(dev);
u8 l4_hdr = 0;
- /* The code below restricts offload features for some tunneled packets.
+ /* The code below restricts offload features for some tunneled and
+ * Q-in-Q packets.
* Offload features for normal (non tunnel) packets are unchanged.
*/
+ features = vlan_features_check(skb, features);
if (!skb->encapsulation ||
!(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS))
return features;
{
int err, phy_reset;
bool active_high = false;
- int msec = 1;
+ int msec = 1, phy_post_delay = 0;
struct device_node *np = pdev->dev.of_node;
if (!np)
else if (!gpio_is_valid(phy_reset))
return 0;
+ err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
+ /* valid reset duration should be less than 1s */
+ if (!err && phy_post_delay > 1000)
+ return -EINVAL;
+
active_high = of_property_read_bool(np, "phy-reset-active-high");
err = devm_gpio_request_one(&pdev->dev, phy_reset,
gpio_set_value_cansleep(phy_reset, !active_high);
+ if (!phy_post_delay)
+ return 0;
+
+ if (phy_post_delay > 20)
+ msleep(phy_post_delay);
+ else
+ usleep_range(phy_post_delay * 1000,
+ phy_post_delay * 1000 + 1000);
+
return 0;
}
#else /* CONFIG_OF */
mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
mlx5_command_str(msg_to_opcode(ent->in)),
msg_to_opcode(ent->in));
- mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+ mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
}
static void cmd_work_handler(struct work_struct *work)
}
cmd->ent_arr[ent->idx] = ent;
+ set_bit(MLX5_CMD_ENT_STATE_PENDING_COMP, &ent->state);
lay = get_inst(cmd, ent->idx);
ent->lay = lay;
memset(lay, 0, sizeof(*lay));
if (ent->callback)
schedule_delayed_work(&ent->cb_timeout_work, cb_timeout);
+ /* Skip sending command to fw if internal error */
+ if (pci_channel_offline(dev->pdev) ||
+ dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) {
+ u8 status = 0;
+ u32 drv_synd;
+
+ ent->ret = mlx5_internal_err_ret_value(dev, msg_to_opcode(ent->in), &drv_synd, &status);
+ MLX5_SET(mbox_out, ent->out, status, status);
+ MLX5_SET(mbox_out, ent->out, syndrome, drv_synd);
+
+ mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
+ return;
+ }
+
/* ring doorbell after the descriptor is valid */
mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx);
wmb();
poll_timeout(ent);
/* make sure we read the descriptor after ownership is SW */
rmb();
- mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+ mlx5_cmd_comp_handler(dev, 1UL << ent->idx, (ent->ret == -ETIMEDOUT));
}
}
wait_for_completion(&ent->done);
} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
ent->ret = -ETIMEDOUT;
- mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+ mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
}
err = ent->ret;
}
}
-void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec)
+void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool forced)
{
struct mlx5_cmd *cmd = &dev->cmd;
struct mlx5_cmd_work_ent *ent;
struct semaphore *sem;
ent = cmd->ent_arr[i];
+
+ /* if we already completed the command, ignore it */
+ if (!test_and_clear_bit(MLX5_CMD_ENT_STATE_PENDING_COMP,
+ &ent->state)) {
+ /* only real completion can free the cmd slot */
+ if (!forced) {
+ mlx5_core_err(dev, "Command completion arrived after timeout (entry idx = %d).\n",
+ ent->idx);
+ free_ent(cmd, ent->idx);
+ }
+ continue;
+ }
+
if (ent->callback)
cancel_delayed_work(&ent->cb_timeout_work);
if (ent->page_queue)
mlx5_core_dbg(dev, "command completed. ret 0x%x, delivery status %s(0x%x)\n",
ent->ret, deliv_status_to_str(ent->status), ent->status);
}
- free_ent(cmd, ent->idx);
+
+ /* only real completion will free the entry slot */
+ if (!forced)
+ free_ent(cmd, ent->idx);
if (ent->callback) {
ds = ent->ts2 - ent->ts1;
#define MLX5_IB_GRH_BYTES 40
#define MLX5_IPOIB_ENCAP_LEN 4
#define MLX5_GID_SIZE 16
+#define MLX5_IPOIB_PSEUDO_LEN 20
+#define MLX5_IPOIB_HARD_LEN (MLX5_IPOIB_PSEUDO_LEN + MLX5_IPOIB_ENCAP_LEN)
static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
struct mlx5_cqe64 *cqe,
struct sk_buff *skb)
{
struct net_device *netdev = rq->netdev;
+ char *pseudo_header;
u8 *dgid;
u8 g;
if (likely(netdev->features & NETIF_F_RXHASH))
mlx5e_skb_set_hash(cqe, skb);
+ /* 20 bytes of ipoib header and 4 for encap existing */
+ pseudo_header = skb_push(skb, MLX5_IPOIB_PSEUDO_LEN);
+ memset(pseudo_header, 0, MLX5_IPOIB_PSEUDO_LEN);
skb_reset_mac_header(skb);
- skb_pull(skb, MLX5_IPOIB_ENCAP_LEN);
+ skb_pull(skb, MLX5_IPOIB_HARD_LEN);
skb->dev = netdev;
#include <net/tc_act/tc_vlan.h>
#include <net/tc_act/tc_tunnel_key.h>
#include <net/tc_act/tc_pedit.h>
+#include <net/tc_act/tc_csum.h>
#include <net/vxlan.h>
#include <net/arp.h>
#include "en.h"
if (e->flags & MLX5_ENCAP_ENTRY_VALID)
mlx5_encap_dealloc(priv->mdev, e->encap_id);
- hlist_del_rcu(&e->encap_hlist);
+ hash_del_rcu(&e->encap_hlist);
kfree(e->encap_header);
kfree(e);
}
struct mlx5e_tc_flow_parse_attr *parse_attr)
{
struct pedit_headers *set_masks, *add_masks, *set_vals, *add_vals;
- int i, action_size, nactions, max_actions, first, last;
+ int i, action_size, nactions, max_actions, first, last, first_z;
void *s_masks_p, *a_masks_p, *vals_p;
- u32 s_mask, a_mask, val;
struct mlx5_fields *f;
u8 cmd, field_bsize;
+ u32 s_mask, a_mask;
unsigned long mask;
void *action;
for (i = 0; i < ARRAY_SIZE(fields); i++) {
f = &fields[i];
/* avoid seeing bits set from previous iterations */
- s_mask = a_mask = mask = val = 0;
+ s_mask = 0;
+ a_mask = 0;
s_masks_p = (void *)set_masks + f->offset;
a_masks_p = (void *)add_masks + f->offset;
memset(a_masks_p, 0, f->size);
}
- memcpy(&val, vals_p, f->size);
-
field_bsize = f->size * BITS_PER_BYTE;
+
+ first_z = find_first_zero_bit(&mask, field_bsize);
first = find_first_bit(&mask, field_bsize);
last = find_last_bit(&mask, field_bsize);
- if (first > 0 || last != (field_bsize - 1)) {
+ if (first > 0 || last != (field_bsize - 1) || first_z < last) {
printk(KERN_WARNING "mlx5: partial rewrite (mask %lx) is currently not offloaded\n",
mask);
return -EOPNOTSUPP;
}
if (field_bsize == 32)
- MLX5_SET(set_action_in, action, data, ntohl(val));
+ MLX5_SET(set_action_in, action, data, ntohl(*(__be32 *)vals_p));
else if (field_bsize == 16)
- MLX5_SET(set_action_in, action, data, ntohs(val));
+ MLX5_SET(set_action_in, action, data, ntohs(*(__be16 *)vals_p));
else if (field_bsize == 8)
- MLX5_SET(set_action_in, action, data, val);
+ MLX5_SET(set_action_in, action, data, *(u8 *)vals_p);
action += action_size;
nactions++;
return err;
}
+static bool csum_offload_supported(struct mlx5e_priv *priv, u32 action, u32 update_flags)
+{
+ u32 prot_flags = TCA_CSUM_UPDATE_FLAG_IPV4HDR | TCA_CSUM_UPDATE_FLAG_TCP |
+ TCA_CSUM_UPDATE_FLAG_UDP;
+
+ /* The HW recalcs checksums only if re-writing headers */
+ if (!(action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR)) {
+ netdev_warn(priv->netdev,
+ "TC csum action is only offloaded with pedit\n");
+ return false;
+ }
+
+ if (update_flags & ~prot_flags) {
+ netdev_warn(priv->netdev,
+ "can't offload TC csum action for some header/s - flags %#x\n",
+ update_flags);
+ return false;
+ }
+
+ return true;
+}
+
static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
struct mlx5e_tc_flow_parse_attr *parse_attr,
struct mlx5e_tc_flow *flow)
continue;
}
+ if (is_tcf_csum(a)) {
+ if (csum_offload_supported(priv, attr->action,
+ tcf_csum_update_flags(a)))
+ continue;
+
+ return -EOPNOTSUPP;
+ }
+
if (is_tcf_skbedit_mark(a)) {
u32 mark = tcf_skbedit_mark(a);
continue;
}
+ if (is_tcf_csum(a)) {
+ if (csum_offload_supported(priv, attr->action,
+ tcf_csum_update_flags(a)))
+ continue;
+
+ return -EOPNOTSUPP;
+ }
+
if (is_tcf_mirred_egress_redirect(a)) {
int ifindex = tcf_mirred_ifindex(a);
struct net_device *out_dev, *encap_dev = NULL;
break;
case MLX5_EVENT_TYPE_CMD:
- mlx5_cmd_comp_handler(dev, be32_to_cpu(eqe->data.cmd.vector));
+ mlx5_cmd_comp_handler(dev, be32_to_cpu(eqe->data.cmd.vector), false);
break;
case MLX5_EVENT_TYPE_PORT_CHANGE:
spin_unlock_irqrestore(&dev->cmd.alloc_lock, flags);
mlx5_core_dbg(dev, "vector 0x%llx\n", vector);
- mlx5_cmd_comp_handler(dev, vector);
+ mlx5_cmd_comp_handler(dev, vector, true);
return;
no_trig:
struct mlx5_priv *priv = &mdev->priv;
struct msix_entry *msix = priv->msix_arr;
int irq = msix[i + MLX5_EQ_VEC_COMP_BASE].vector;
- int err;
if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) {
mlx5_core_warn(mdev, "zalloc_cpumask_var failed");
cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node),
priv->irq_info[i].mask);
- err = irq_set_affinity_hint(irq, priv->irq_info[i].mask);
- if (err) {
- mlx5_core_warn(mdev, "irq_set_affinity_hint failed,irq 0x%.4x",
- irq);
- goto err_clear_mask;
- }
+#ifdef CONFIG_SMP
+ if (irq_set_affinity_hint(irq, priv->irq_info[i].mask))
+ mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq);
+#endif
return 0;
-
-err_clear_mask:
- free_cpumask_var(priv->irq_info[i].mask);
- return err;
}
static void mlx5_irq_clear_affinity_hint(struct mlx5_core_dev *mdev, int i)
if (nla_put_u32(skb, IFLA_GENEVE_ID, vni))
goto nla_put_failure;
- if (ip_tunnel_info_af(info) == AF_INET) {
+ if (rtnl_dereference(geneve->sock4)) {
if (nla_put_in_addr(skb, IFLA_GENEVE_REMOTE,
info->key.u.ipv4.dst))
goto nla_put_failure;
!!(info->key.tun_flags & TUNNEL_CSUM)))
goto nla_put_failure;
+ }
+
#if IS_ENABLED(CONFIG_IPV6)
- } else {
+ if (rtnl_dereference(geneve->sock6)) {
if (nla_put_in6_addr(skb, IFLA_GENEVE_REMOTE6,
&info->key.u.ipv6.dst))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
!geneve->use_udp6_rx_checksums))
goto nla_put_failure;
-#endif
}
+#endif
if (nla_put_u8(skb, IFLA_GENEVE_TTL, info->key.ttl) ||
nla_put_u8(skb, IFLA_GENEVE_TOS, info->key.tos) ||
/* Check if there's an existing gtpX device to configure */
dev = dev_get_by_index_rcu(net, nla_get_u32(nla[GTPA_LINK]));
- if (dev->netdev_ops == >p_netdev_ops)
+ if (dev && dev->netdev_ops == >p_netdev_ops)
gtp = netdev_priv(dev);
put_net(net);
config MDIO_OCTEON
tristate "Octeon and some ThunderX SOCs MDIO buses"
depends on 64BIT
- depends on HAS_IOMEM
+ depends on HAS_IOMEM && OF_MDIO
select MDIO_CAVIUM
help
This module provides a driver for the Octeon and ThunderX MDIO
{
int err;
- /* The Marvell PHY has an errata which requires
- * that certain registers get written in order
- * to restart autonegotiation */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x1f);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x200c);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x5);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x100);
- if (err < 0)
- return err;
-
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
return err;
return 0;
}
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* This Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation
+ */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ return marvell_config_aneg(phydev);
+}
+
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int err;
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
.config_init = &marvell_config_init,
- .config_aneg = &marvell_config_aneg,
+ .config_aneg = &m88e1101_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
return -ENODEV;
}
+ return 0;
+
+bad_desc:
+ dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+
+/* like usbnet_generic_cdc_bind() but handles filter initialization
+ * correctly
+ */
+int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int rv;
+
+ rv = usbnet_generic_cdc_bind(dev, intf);
+ if (rv < 0)
+ goto bail_out;
+
/* Some devices don't initialise properly. In particular
* the packet filter is not reset. There are devices that
* don't do reset all the way. So the packet filter should
*/
usbnet_cdc_update_filter(dev);
- return 0;
-
-bad_desc:
- dev_info(&dev->udev->dev, "bad CDC descriptors\n");
- return -ENODEV;
+bail_out:
+ return rv;
}
-EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
{
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
< sizeof(struct cdc_state)));
- status = usbnet_generic_cdc_bind(dev, intf);
+ status = usbnet_ether_cdc_bind(dev, intf);
if (status < 0)
return status;
if (ret < 0)
return ret;
- if (features & NETIF_F_HW_CSUM)
+ if (features & NETIF_F_IP_CSUM)
read_buf |= Tx_COE_EN_;
else
read_buf &= ~Tx_COE_EN_;
spin_lock_init(&pdata->mac_cr_lock);
+ /* LAN95xx devices do not alter the computed checksum of 0 to 0xffff.
+ * RFC 2460, ipv6 UDP calculated checksum yields a result of zero must
+ * be changed to 0xffff. RFC 768, ipv4 UDP computed checksum is zero,
+ * it is transmitted as all ones. The zero transmitted checksum means
+ * transmitter generated no checksum. Hence, enable csum offload only
+ * for ipv4 packets.
+ */
if (DEFAULT_TX_CSUM_ENABLE)
- dev->net->features |= NETIF_F_HW_CSUM;
+ dev->net->features |= NETIF_F_IP_CSUM;
if (DEFAULT_RX_CSUM_ENABLE)
dev->net->features |= NETIF_F_RXCSUM;
- dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+ dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
smsc95xx_init_mac_address(dev);
.ndo_poll_controller = virtnet_netpoll,
#endif
.ndo_xdp = virtnet_xdp,
+ .ndo_features_check = passthru_features_check,
};
static void virtnet_config_changed_work(struct work_struct *work)
}
#ifdef CONFIG_BLK_DEV_INTEGRITY
+static void nvme_prep_integrity(struct gendisk *disk, struct nvme_id_ns *id,
+ u16 bs)
+{
+ struct nvme_ns *ns = disk->private_data;
+ u16 old_ms = ns->ms;
+ u8 pi_type = 0;
+
+ ns->ms = le16_to_cpu(id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ms);
+ ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+
+ /* PI implementation requires metadata equal t10 pi tuple size */
+ if (ns->ms == sizeof(struct t10_pi_tuple))
+ pi_type = id->dps & NVME_NS_DPS_PI_MASK;
+
+ if (blk_get_integrity(disk) &&
+ (ns->pi_type != pi_type || ns->ms != old_ms ||
+ bs != queue_logical_block_size(disk->queue) ||
+ (ns->ms && ns->ext)))
+ blk_integrity_unregister(disk);
+
+ ns->pi_type = pi_type;
+}
+
static void nvme_init_integrity(struct nvme_ns *ns)
{
struct blk_integrity integrity;
blk_queue_max_integrity_segments(ns->queue, 1);
}
#else
+static void nvme_prep_integrity(struct gendisk *disk, struct nvme_id_ns *id,
+ u16 bs)
+{
+}
static void nvme_init_integrity(struct nvme_ns *ns)
{
}
static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
{
struct nvme_ns *ns = disk->private_data;
- u8 lbaf, pi_type;
- u16 old_ms;
- unsigned short bs;
-
- old_ms = ns->ms;
- lbaf = id->flbas & NVME_NS_FLBAS_LBA_MASK;
- ns->lba_shift = id->lbaf[lbaf].ds;
- ns->ms = le16_to_cpu(id->lbaf[lbaf].ms);
- ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+ u16 bs;
/*
* If identify namespace failed, use default 512 byte block size so
* block layer can use before failing read/write for 0 capacity.
*/
+ ns->lba_shift = id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ds;
if (ns->lba_shift == 0)
ns->lba_shift = 9;
bs = 1 << ns->lba_shift;
- /* XXX: PI implementation requires metadata equal t10 pi tuple size */
- pi_type = ns->ms == sizeof(struct t10_pi_tuple) ?
- id->dps & NVME_NS_DPS_PI_MASK : 0;
blk_mq_freeze_queue(disk->queue);
- if (blk_get_integrity(disk) && (ns->pi_type != pi_type ||
- ns->ms != old_ms ||
- bs != queue_logical_block_size(disk->queue) ||
- (ns->ms && ns->ext)))
- blk_integrity_unregister(disk);
- ns->pi_type = pi_type;
+ if (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED)
+ nvme_prep_integrity(disk, id, bs);
blk_queue_logical_block_size(ns->queue, bs);
-
if (ns->ms && !blk_get_integrity(disk) && !ns->ext)
nvme_init_integrity(ns);
if (ns->ms && !(ns->ms == 8 && ns->pi_type) && !blk_get_integrity(disk))
}
memcpy(ctrl->psd, id->psd, sizeof(ctrl->psd));
- if (ctrl->ops->is_fabrics) {
+ if (ctrl->ops->flags & NVME_F_FABRICS) {
ctrl->icdoff = le16_to_cpu(id->icdoff);
ctrl->ioccsz = le32_to_cpu(id->ioccsz);
ctrl->iorcsz = le32_to_cpu(id->iorcsz);
if (ns->ndev)
nvme_nvm_unregister_sysfs(ns);
del_gendisk(ns->disk);
- blk_mq_abort_requeue_list(ns->queue);
blk_cleanup_queue(ns->queue);
}
continue;
revalidate_disk(ns->disk);
blk_set_queue_dying(ns->queue);
- blk_mq_abort_requeue_list(ns->queue);
- blk_mq_start_stopped_hw_queues(ns->queue, true);
+
+ /*
+ * Forcibly start all queues to avoid having stuck requests.
+ * Note that we must ensure the queues are not stopped
+ * when the final removal happens.
+ */
+ blk_mq_start_hw_queues(ns->queue);
+
+ /* draining requests in requeue list */
+ blk_mq_kick_requeue_list(ns->queue);
}
mutex_unlock(&ctrl->namespaces_mutex);
}
#define NVMEFC_QUEUE_DELAY 3 /* ms units */
-#define NVME_FC_MAX_CONNECT_ATTEMPTS 1
-
struct nvme_fc_queue {
struct nvme_fc_ctrl *ctrl;
struct device *dev;
struct work_struct delete_work;
struct work_struct reset_work;
struct delayed_work connect_work;
- int reconnect_delay;
- int connect_attempts;
struct kref ref;
u32 flags;
complete_rq = __nvme_fc_fcpop_chk_teardowns(ctrl, op);
if (!complete_rq) {
if (unlikely(op->flags & FCOP_FLAGS_TERMIO)) {
- status = cpu_to_le16(NVME_SC_ABORT_REQ);
+ status = cpu_to_le16(NVME_SC_ABORT_REQ << 1);
if (blk_queue_dying(rq->q))
- status |= cpu_to_le16(NVME_SC_DNR);
+ status |= cpu_to_le16(NVME_SC_DNR << 1);
}
nvme_end_request(rq, status, result);
} else
dev_warn(ctrl->ctrl.device,
"NVME-FC{%d}: transport association error detected: %s\n",
ctrl->cnum, errmsg);
- dev_info(ctrl->ctrl.device,
+ dev_warn(ctrl->ctrl.device,
"NVME-FC{%d}: resetting controller\n", ctrl->cnum);
/* stop the queues on error, cleanup is in reset thread */
if (!opts->nr_io_queues)
return 0;
- dev_info(ctrl->ctrl.device, "creating %d I/O queues.\n",
- opts->nr_io_queues);
-
nvme_fc_init_io_queues(ctrl);
memset(&ctrl->tag_set, 0, sizeof(ctrl->tag_set));
if (ctrl->queue_count == 1)
return 0;
- dev_info(ctrl->ctrl.device, "Recreating %d I/O queues.\n",
- opts->nr_io_queues);
-
nvme_fc_init_io_queues(ctrl);
ret = blk_mq_reinit_tagset(&ctrl->tag_set);
int ret;
bool changed;
- ctrl->connect_attempts++;
+ ++ctrl->ctrl.opts->nr_reconnects;
/*
* Create the admin queue
changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
WARN_ON_ONCE(!changed);
- ctrl->connect_attempts = 0;
-
- kref_get(&ctrl->ctrl.kref);
+ ctrl->ctrl.opts->nr_reconnects = 0;
if (ctrl->queue_count > 1) {
nvme_start_queues(&ctrl->ctrl);
/*
* tear down the controller
- * This will result in the last reference on the nvme ctrl to
- * expire, calling the transport nvme_fc_nvme_ctrl_freed() callback.
- * From there, the transport will tear down it's logical queues and
- * association.
+ * After the last reference on the nvme ctrl is removed,
+ * the transport nvme_fc_nvme_ctrl_freed() callback will be
+ * invoked. From there, the transport will tear down it's
+ * logical queues and association.
*/
nvme_uninit_ctrl(&ctrl->ctrl);
nvme_put_ctrl(&ctrl->ctrl);
}
-static int
-__nvme_fc_del_ctrl(struct nvme_fc_ctrl *ctrl)
+static bool
+__nvme_fc_schedule_delete_work(struct nvme_fc_ctrl *ctrl)
{
if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING))
- return -EBUSY;
+ return true;
if (!queue_work(nvme_fc_wq, &ctrl->delete_work))
- return -EBUSY;
+ return true;
- return 0;
+ return false;
+}
+
+static int
+__nvme_fc_del_ctrl(struct nvme_fc_ctrl *ctrl)
+{
+ return __nvme_fc_schedule_delete_work(ctrl) ? -EBUSY : 0;
}
/*
return ret;
}
+static void
+nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status)
+{
+ /* If we are resetting/deleting then do nothing */
+ if (ctrl->ctrl.state != NVME_CTRL_RECONNECTING) {
+ WARN_ON_ONCE(ctrl->ctrl.state == NVME_CTRL_NEW ||
+ ctrl->ctrl.state == NVME_CTRL_LIVE);
+ return;
+ }
+
+ dev_info(ctrl->ctrl.device,
+ "NVME-FC{%d}: reset: Reconnect attempt failed (%d)\n",
+ ctrl->cnum, status);
+
+ if (nvmf_should_reconnect(&ctrl->ctrl)) {
+ dev_info(ctrl->ctrl.device,
+ "NVME-FC{%d}: Reconnect attempt in %d seconds.\n",
+ ctrl->cnum, ctrl->ctrl.opts->reconnect_delay);
+ queue_delayed_work(nvme_fc_wq, &ctrl->connect_work,
+ ctrl->ctrl.opts->reconnect_delay * HZ);
+ } else {
+ dev_warn(ctrl->ctrl.device,
+ "NVME-FC{%d}: Max reconnect attempts (%d) "
+ "reached. Removing controller\n",
+ ctrl->cnum, ctrl->ctrl.opts->nr_reconnects);
+ WARN_ON(__nvme_fc_schedule_delete_work(ctrl));
+ }
+}
+
static void
nvme_fc_reset_ctrl_work(struct work_struct *work)
{
nvme_fc_delete_association(ctrl);
ret = nvme_fc_create_association(ctrl);
- if (ret) {
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: reset: Reconnect attempt failed (%d)\n",
- ctrl->cnum, ret);
- if (ctrl->connect_attempts >= NVME_FC_MAX_CONNECT_ATTEMPTS) {
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: Max reconnect attempts (%d) "
- "reached. Removing controller\n",
- ctrl->cnum, ctrl->connect_attempts);
-
- if (!nvme_change_ctrl_state(&ctrl->ctrl,
- NVME_CTRL_DELETING)) {
- dev_err(ctrl->ctrl.device,
- "NVME-FC{%d}: failed to change state "
- "to DELETING\n", ctrl->cnum);
- return;
- }
-
- WARN_ON(!queue_work(nvme_fc_wq, &ctrl->delete_work));
- return;
- }
-
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: Reconnect attempt in %d seconds.\n",
- ctrl->cnum, ctrl->reconnect_delay);
- queue_delayed_work(nvme_fc_wq, &ctrl->connect_work,
- ctrl->reconnect_delay * HZ);
- } else
+ if (ret)
+ nvme_fc_reconnect_or_delete(ctrl, ret);
+ else
dev_info(ctrl->ctrl.device,
"NVME-FC{%d}: controller reset complete\n", ctrl->cnum);
}
{
struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl);
- dev_warn(ctrl->ctrl.device,
+ dev_info(ctrl->ctrl.device,
"NVME-FC{%d}: admin requested controller reset\n", ctrl->cnum);
if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING))
static const struct nvme_ctrl_ops nvme_fc_ctrl_ops = {
.name = "fc",
.module = THIS_MODULE,
- .is_fabrics = true,
+ .flags = NVME_F_FABRICS,
.reg_read32 = nvmf_reg_read32,
.reg_read64 = nvmf_reg_read64,
.reg_write32 = nvmf_reg_write32,
struct nvme_fc_ctrl, connect_work);
ret = nvme_fc_create_association(ctrl);
- if (ret) {
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: Reconnect attempt failed (%d)\n",
- ctrl->cnum, ret);
- if (ctrl->connect_attempts >= NVME_FC_MAX_CONNECT_ATTEMPTS) {
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: Max reconnect attempts (%d) "
- "reached. Removing controller\n",
- ctrl->cnum, ctrl->connect_attempts);
-
- if (!nvme_change_ctrl_state(&ctrl->ctrl,
- NVME_CTRL_DELETING)) {
- dev_err(ctrl->ctrl.device,
- "NVME-FC{%d}: failed to change state "
- "to DELETING\n", ctrl->cnum);
- return;
- }
-
- WARN_ON(!queue_work(nvme_fc_wq, &ctrl->delete_work));
- return;
- }
-
- dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: Reconnect attempt in %d seconds.\n",
- ctrl->cnum, ctrl->reconnect_delay);
- queue_delayed_work(nvme_fc_wq, &ctrl->connect_work,
- ctrl->reconnect_delay * HZ);
- } else
+ if (ret)
+ nvme_fc_reconnect_or_delete(ctrl, ret);
+ else
dev_info(ctrl->ctrl.device,
"NVME-FC{%d}: controller reconnect complete\n",
ctrl->cnum);
INIT_WORK(&ctrl->delete_work, nvme_fc_delete_ctrl_work);
INIT_WORK(&ctrl->reset_work, nvme_fc_reset_ctrl_work);
INIT_DELAYED_WORK(&ctrl->connect_work, nvme_fc_connect_ctrl_work);
- ctrl->reconnect_delay = opts->reconnect_delay;
spin_lock_init(&ctrl->lock);
/* io queue count */
ctrl->ctrl.opts = NULL;
/* initiate nvme ctrl ref counting teardown */
nvme_uninit_ctrl(&ctrl->ctrl);
- nvme_put_ctrl(&ctrl->ctrl);
/* as we're past the point where we transition to the ref
* counting teardown path, if we return a bad pointer here,
return ERR_PTR(ret);
}
+ kref_get(&ctrl->ctrl.kref);
+
dev_info(ctrl->ctrl.device,
"NVME-FC{%d}: new ctrl: NQN \"%s\"\n",
ctrl->cnum, ctrl->ctrl.opts->subsysnqn);
static struct nvmf_transport_ops nvme_fc_transport = {
.name = "fc",
.required_opts = NVMF_OPT_TRADDR | NVMF_OPT_HOST_TRADDR,
- .allowed_opts = NVMF_OPT_RECONNECT_DELAY,
+ .allowed_opts = NVMF_OPT_RECONNECT_DELAY | NVMF_OPT_CTRL_LOSS_TMO,
.create_ctrl = nvme_fc_create_ctrl,
};
struct nvme_ctrl_ops {
const char *name;
struct module *module;
- bool is_fabrics;
+ unsigned int flags;
+#define NVME_F_FABRICS (1 << 0)
+#define NVME_F_METADATA_SUPPORTED (1 << 1)
int (*reg_read32)(struct nvme_ctrl *ctrl, u32 off, u32 *val);
int (*reg_write32)(struct nvme_ctrl *ctrl, u32 off, u32 val);
int (*reg_read64)(struct nvme_ctrl *ctrl, u32 off, u64 *val);
c.dbbuf.prp2 = cpu_to_le64(dev->dbbuf_eis_dma_addr);
if (nvme_submit_sync_cmd(dev->ctrl.admin_q, &c, NULL, 0)) {
- dev_warn(dev->dev, "unable to set dbbuf\n");
+ dev_warn(dev->ctrl.device, "unable to set dbbuf\n");
/* Free memory and continue on */
nvme_dbbuf_dma_free(dev);
}
result = pci_read_config_word(to_pci_dev(dev->dev), PCI_STATUS,
&pci_status);
if (result == PCIBIOS_SUCCESSFUL)
- dev_warn(dev->dev,
+ dev_warn(dev->ctrl.device,
"controller is down; will reset: CSTS=0x%x, PCI_STATUS=0x%hx\n",
csts, pci_status);
else
- dev_warn(dev->dev,
+ dev_warn(dev->ctrl.device,
"controller is down; will reset: CSTS=0x%x, PCI_STATUS read failed (%d)\n",
csts, result);
}
*/
if (pdev->vendor == PCI_VENDOR_ID_APPLE && pdev->device == 0x2001) {
dev->q_depth = 2;
- dev_warn(dev->dev, "detected Apple NVMe controller, set "
- "queue depth=%u to work around controller resets\n",
+ dev_warn(dev->ctrl.device, "detected Apple NVMe controller, "
+ "set queue depth=%u to work around controller resets\n",
dev->q_depth);
}
if (dev->cmbsz) {
if (sysfs_add_file_to_group(&dev->ctrl.device->kobj,
&dev_attr_cmb.attr, NULL))
- dev_warn(dev->dev,
+ dev_warn(dev->ctrl.device,
"failed to add sysfs attribute for CMB\n");
}
}
static const struct nvme_ctrl_ops nvme_pci_ctrl_ops = {
.name = "pcie",
.module = THIS_MODULE,
+ .flags = NVME_F_METADATA_SUPPORTED,
.reg_read32 = nvme_pci_reg_read32,
.reg_write32 = nvme_pci_reg_write32,
.reg_read64 = nvme_pci_reg_read64,
{ PCI_VDEVICE(INTEL, 0x0a54),
.driver_data = NVME_QUIRK_STRIPE_SIZE |
NVME_QUIRK_DEALLOCATE_ZEROES, },
+ { PCI_VDEVICE(INTEL, 0xf1a5), /* Intel 600P/P3100 */
+ .driver_data = NVME_QUIRK_NO_DEEPEST_PS },
{ PCI_VDEVICE(INTEL, 0x5845), /* Qemu emulated controller */
.driver_data = NVME_QUIRK_IDENTIFY_CNS, },
{ PCI_DEVICE(0x1c58, 0x0003), /* HGST adapter */
nvme_rdma_wr_error(cq, wc, "SEND");
}
+static inline int nvme_rdma_queue_sig_limit(struct nvme_rdma_queue *queue)
+{
+ int sig_limit;
+
+ /*
+ * We signal completion every queue depth/2 and also handle the
+ * degenerated case of a device with queue_depth=1, where we
+ * would need to signal every message.
+ */
+ sig_limit = max(queue->queue_size / 2, 1);
+ return (++queue->sig_count % sig_limit) == 0;
+}
+
static int nvme_rdma_post_send(struct nvme_rdma_queue *queue,
struct nvme_rdma_qe *qe, struct ib_sge *sge, u32 num_sge,
struct ib_send_wr *first, bool flush)
* Would have been way to obvious to handle this in hardware or
* at least the RDMA stack..
*
- * This messy and racy code sniplet is copy and pasted from the iSER
- * initiator, and the magic '32' comes from there as well.
- *
* Always signal the flushes. The magic request used for the flush
* sequencer is not allocated in our driver's tagset and it's
* triggered to be freed by blk_cleanup_queue(). So we need to
* embedded in request's payload, is not freed when __ib_process_cq()
* calls wr_cqe->done().
*/
- if ((++queue->sig_count % 32) == 0 || flush)
+ if (nvme_rdma_queue_sig_limit(queue) || flush)
wr.send_flags |= IB_SEND_SIGNALED;
if (first)
static const struct nvme_ctrl_ops nvme_rdma_ctrl_ops = {
.name = "rdma",
.module = THIS_MODULE,
- .is_fabrics = true,
+ .flags = NVME_F_FABRICS,
.reg_read32 = nvmf_reg_read32,
.reg_read64 = nvmf_reg_read64,
.reg_write32 = nvmf_reg_write32,
static const struct nvme_ctrl_ops nvme_loop_ctrl_ops = {
.name = "loop",
.module = THIS_MODULE,
- .is_fabrics = true,
+ .flags = NVME_F_FABRICS,
.reg_read32 = nvmf_reg_read32,
.reg_read64 = nvmf_reg_read64,
.reg_write32 = nvmf_reg_write32,
arch_initcall_sync(of_platform_default_populate_init);
#endif
-static int of_platform_device_destroy(struct device *dev, void *data)
+int of_platform_device_destroy(struct device *dev, void *data)
{
/* Do not touch devices not populated from the device tree */
if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED))
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
return 0;
}
+EXPORT_SYMBOL_GPL(of_platform_device_destroy);
/**
* of_platform_depopulate() - Remove devices populated from device tree
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
{
- return 0;
+ unsigned long pc = instruction_pointer(regs);
+ unsigned long instr = *(unsigned long *)pc;
+ int reg = (instr >> 12) & 15;
+
+ /*
+ * If the instruction being executed was a read,
+ * make it look like it read all-ones.
+ */
+ if ((instr & 0x0c100000) == 0x04100000) {
+ unsigned long val;
+
+ if (instr & 0x00400000)
+ val = 255;
+ else
+ val = -1;
+
+ regs->uregs[reg] = val;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ if ((instr & 0x0e100090) == 0x00100090) {
+ regs->uregs[reg] = -1;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ return 1;
}
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
* we can install the handler here without risking it
* accessing some uninitialized driver state.
*/
- hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
- "imprecise external abort");
+ hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
+ "external abort on non-linefetch");
return platform_driver_register(&imx6_pcie_driver);
}
config PCI_ENDPOINT
bool "PCI Endpoint Support"
+ depends on HAS_DMA
help
Enable this configuration option to support configurable PCI
endpoint. This should be enabled if the platform has a PCI
if (!pm_runtime_suspended(dev)
|| pci_target_state(pci_dev) != pci_dev->current_state
- || platform_pci_need_resume(pci_dev))
+ || platform_pci_need_resume(pci_dev)
+ || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME))
return false;
/*
cdev = &stdev->cdev;
cdev_init(cdev, &switchtec_fops);
cdev->owner = THIS_MODULE;
- cdev->kobj.parent = &dev->kobj;
return stdev;
stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
- stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+ stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id);
stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
+ if (stdev->partition_count < 1)
+ stdev->partition_count = 1;
+
init_pff(stdev);
pci_set_drvdata(pdev, stdev);
SWITCHTEC_EVENT_EN_IRQ,
&stdev->mmio_part_cfg->mrpc_comp_hdr);
- rc = cdev_add(&stdev->cdev, stdev->dev.devt, 1);
- if (rc)
- goto err_put;
-
- rc = device_add(&stdev->dev);
+ rc = cdev_device_add(&stdev->cdev, &stdev->dev);
if (rc)
goto err_devadd;
return 0;
err_devadd:
- cdev_del(&stdev->cdev);
stdev_kill(stdev);
err_put:
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
pci_set_drvdata(pdev, NULL);
- device_del(&stdev->dev);
- cdev_del(&stdev->cdev);
+ cdev_device_del(&stdev->cdev, &stdev->dev);
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
dev_info(&stdev->dev, "unregistered.\n");
power_zone->id = result;
idr_init(&power_zone->idr);
+ result = -ENOMEM;
power_zone->name = kstrdup(name, GFP_KERNEL);
if (!power_zone->name)
goto err_name_alloc;
}
spin_unlock_irqrestore(&rtc_lock, flags);
- pm_wakeup_event(dev, 0);
+ pm_wakeup_hard_event(dev);
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
return ACPI_INTERRUPT_HANDLED;
goto bye;
}
- mempool_free(mbp, hw->mb_mempool);
if (finicsum != cfcsum) {
csio_warn(hw,
"Config File checksum mismatch: csum=%#x, computed=%#x\n",
rv = csio_hw_validate_caps(hw, mbp);
if (rv != 0)
goto bye;
+
+ mempool_free(mbp, hw->mb_mempool);
+ mbp = NULL;
+
/*
* Note that we're operating with parameters
* not supplied by the driver, rather than from hard-wired
fp = fc_frame_alloc(lport, sizeof(*rtv));
if (!fp) {
rjt_data.reason = ELS_RJT_UNAB;
- rjt_data.reason = ELS_EXPL_INSUF_RES;
+ rjt_data.explan = ELS_EXPL_INSUF_RES;
fc_seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
goto drop;
}
uint32_t buffer_tag; /* used for tagged queue ring */
};
+struct lpfc_nvmet_ctxbuf {
+ struct list_head list;
+ struct lpfc_nvmet_rcv_ctx *context;
+ struct lpfc_iocbq *iocbq;
+ struct lpfc_sglq *sglq;
+};
+
struct lpfc_dma_pool {
struct lpfc_dmabuf *elements;
uint32_t max_count;
struct lpfc_dmabuf dbuf;
uint16_t total_size;
uint16_t bytes_recv;
- void *context;
- struct lpfc_iocbq *iocbq;
- struct lpfc_sglq *sglq;
+ uint16_t idx;
struct lpfc_queue *hrq; /* ptr to associated Header RQ */
struct lpfc_queue *drq; /* ptr to associated Data RQ */
};
/* INIT_LINK mailbox command */
#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
#define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
+#define LS_MDS_LINK_DOWN 0x8 /* MDS Diagnostics Link Down */
+#define LS_MDS_LOOPBACK 0x16 /* MDS Diagnostics Link Up (Loopback) */
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
uint32_t cfg_nvme_oas;
uint32_t cfg_nvme_io_channel;
uint32_t cfg_nvmet_mrq;
- uint32_t cfg_nvmet_mrq_post;
uint32_t cfg_enable_nvmet;
uint32_t cfg_nvme_enable_fb;
uint32_t cfg_nvmet_fb_size;
struct pci_pool *lpfc_mbuf_pool;
struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
+ struct pci_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
struct pci_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
struct pci_pool *txrdy_payload_pool;
struct lpfc_dma_pool lpfc_mbuf_safety_pool;
static inline struct lpfc_sli_ring *
lpfc_phba_elsring(struct lpfc_hba *phba)
{
- if (phba->sli_rev == LPFC_SLI_REV4)
- return phba->sli4_hba.els_wq->pring;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (phba->sli4_hba.els_wq)
+ return phba->sli4_hba.els_wq->pring;
+ else
+ return NULL;
+ }
return &phba->sli.sli3_ring[LPFC_ELS_RING];
}
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
-#define LPFC_DEF_MRQ_POST 256
-#define LPFC_MIN_MRQ_POST 32
-#define LPFC_MAX_MRQ_POST 512
+#define LPFC_DEF_MRQ_POST 512
+#define LPFC_MIN_MRQ_POST 512
+#define LPFC_MAX_MRQ_POST 2048
/*
* Write key size should be multiple of 4. If write key is changed
atomic_read(&tgtp->xmt_ls_rsp_error));
len += snprintf(buf+len, PAGE_SIZE-len,
- "FCP: Rcv %08x Drop %08x\n",
+ "FCP: Rcv %08x Release %08x Drop %08x\n",
atomic_read(&tgtp->rcv_fcp_cmd_in),
+ atomic_read(&tgtp->xmt_fcp_release),
atomic_read(&tgtp->rcv_fcp_cmd_drop));
if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=
}
len += snprintf(buf+len, PAGE_SIZE-len,
- "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x\n",
+ "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x "
+ "drop %08x\n",
atomic_read(&tgtp->xmt_fcp_read),
atomic_read(&tgtp->xmt_fcp_read_rsp),
atomic_read(&tgtp->xmt_fcp_write),
- atomic_read(&tgtp->xmt_fcp_rsp));
-
- len += snprintf(buf+len, PAGE_SIZE-len,
- "FCP Rsp: abort %08x drop %08x\n",
- atomic_read(&tgtp->xmt_fcp_abort),
+ atomic_read(&tgtp->xmt_fcp_rsp),
atomic_read(&tgtp->xmt_fcp_drop));
len += snprintf(buf+len, PAGE_SIZE-len,
atomic_read(&tgtp->xmt_fcp_rsp_drop));
len += snprintf(buf+len, PAGE_SIZE-len,
- "ABORT: Xmt %08x Err %08x Cmpl %08x",
+ "ABORT: Xmt %08x Cmpl %08x\n",
+ atomic_read(&tgtp->xmt_fcp_abort),
+ atomic_read(&tgtp->xmt_fcp_abort_cmpl));
+
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x",
+ atomic_read(&tgtp->xmt_abort_sol),
+ atomic_read(&tgtp->xmt_abort_unsol),
atomic_read(&tgtp->xmt_abort_rsp),
- atomic_read(&tgtp->xmt_abort_rsp_error),
- atomic_read(&tgtp->xmt_abort_cmpl));
+ atomic_read(&tgtp->xmt_abort_rsp_error));
+
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "IO_CTX: %08x outstanding %08x total %x",
+ phba->sli4_hba.nvmet_ctx_cnt,
+ phba->sli4_hba.nvmet_io_wait_cnt,
+ phba->sli4_hba.nvmet_io_wait_total);
len += snprintf(buf+len, PAGE_SIZE-len, "\n");
return len;
1, 1, 16,
"Specify number of RQ pairs for processing NVMET cmds");
-/*
- * lpfc_nvmet_mrq_post: Specify number buffers to post on every MRQ
- *
- */
-LPFC_ATTR_R(nvmet_mrq_post, LPFC_DEF_MRQ_POST,
- LPFC_MIN_MRQ_POST, LPFC_MAX_MRQ_POST,
- "Specify number of buffers to post on every MRQ");
-
/*
* lpfc_enable_fc4_type: Defines what FC4 types are supported.
* Supported Values: 1 - register just FCP
&dev_attr_lpfc_suppress_rsp,
&dev_attr_lpfc_nvme_io_channel,
&dev_attr_lpfc_nvmet_mrq,
- &dev_attr_lpfc_nvmet_mrq_post,
&dev_attr_lpfc_nvme_enable_fb,
&dev_attr_lpfc_nvmet_fb_size,
&dev_attr_lpfc_enable_bg,
lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);
lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq);
- lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post);
/* Initialize first burst. Target vs Initiator are different. */
lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);
/* Not NVME Target mode. Turn off Target parameters. */
phba->nvmet_support = 0;
phba->cfg_nvmet_mrq = 0;
- phba->cfg_nvmet_mrq_post = 0;
phba->cfg_nvmet_fb_size = 0;
}
void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *);
void lpfc_retry_pport_discovery(struct lpfc_hba *);
void lpfc_release_rpi(struct lpfc_hba *, struct lpfc_vport *, uint16_t);
+int lpfc_init_iocb_list(struct lpfc_hba *phba, int cnt);
+void lpfc_free_iocb_list(struct lpfc_hba *phba);
+int lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq, int count, int idx);
void lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
struct rqb_dmabuf *lpfc_sli4_nvmet_alloc(struct lpfc_hba *phba);
void lpfc_sli4_nvmet_free(struct lpfc_hba *phba, struct rqb_dmabuf *dmab);
-void lpfc_nvmet_rq_post(struct lpfc_hba *phba, struct lpfc_nvmet_rcv_ctx *ctxp,
- struct lpfc_dmabuf *mp);
+void lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba,
+ struct lpfc_nvmet_ctxbuf *ctxp);
int lpfc_nvmet_rcv_unsol_abort(struct lpfc_vport *vport,
struct fc_frame_header *fc_hdr);
void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
uint16_t);
int lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe);
-int lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hq,
- struct lpfc_queue *dq, int count);
int lpfc_free_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hq);
void lpfc_unregister_fcf(struct lpfc_hba *);
void lpfc_unregister_fcf_rescan(struct lpfc_hba *);
void lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *);
int lpfc_mem_alloc(struct lpfc_hba *, int align);
+int lpfc_nvmet_mem_alloc(struct lpfc_hba *phba);
int lpfc_mem_alloc_active_rrq_pool_s4(struct lpfc_hba *);
void lpfc_mem_free(struct lpfc_hba *);
void lpfc_mem_free_all(struct lpfc_hba *);
ae->un.AttrTypes[3] = 0x02; /* Type 1 - ELS */
ae->un.AttrTypes[2] = 0x01; /* Type 8 - FCP */
+ ae->un.AttrTypes[6] = 0x01; /* Type 40 - NVME */
ae->un.AttrTypes[7] = 0x01; /* Type 32 - CT */
size = FOURBYTES + 32;
ad->AttrLen = cpu_to_be16(size);
atomic_read(&tgtp->xmt_fcp_write),
atomic_read(&tgtp->xmt_fcp_rsp));
- len += snprintf(buf + len, size - len,
- "FCP Rsp: abort %08x drop %08x\n",
- atomic_read(&tgtp->xmt_fcp_abort),
- atomic_read(&tgtp->xmt_fcp_drop));
-
len += snprintf(buf + len, size - len,
"FCP Rsp Cmpl: %08x err %08x drop %08x\n",
atomic_read(&tgtp->xmt_fcp_rsp_cmpl),
atomic_read(&tgtp->xmt_fcp_rsp_drop));
len += snprintf(buf + len, size - len,
- "ABORT: Xmt %08x Err %08x Cmpl %08x",
+ "ABORT: Xmt %08x Cmpl %08x\n",
+ atomic_read(&tgtp->xmt_fcp_abort),
+ atomic_read(&tgtp->xmt_fcp_abort_cmpl));
+
+ len += snprintf(buf + len, size - len,
+ "ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x",
+ atomic_read(&tgtp->xmt_abort_sol),
+ atomic_read(&tgtp->xmt_abort_unsol),
atomic_read(&tgtp->xmt_abort_rsp),
- atomic_read(&tgtp->xmt_abort_rsp_error),
- atomic_read(&tgtp->xmt_abort_cmpl));
+ atomic_read(&tgtp->xmt_abort_rsp_error));
len += snprintf(buf + len, size - len, "\n");
}
spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
}
+
+ len += snprintf(buf + len, size - len,
+ "IO_CTX: %08x outstanding %08x total %08x\n",
+ phba->sli4_hba.nvmet_ctx_cnt,
+ phba->sli4_hba.nvmet_io_wait_cnt,
+ phba->sli4_hba.nvmet_io_wait_total);
} else {
if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
return len;
atomic_set(&tgtp->rcv_ls_req_out, 0);
atomic_set(&tgtp->rcv_ls_req_drop, 0);
atomic_set(&tgtp->xmt_ls_abort, 0);
+ atomic_set(&tgtp->xmt_ls_abort_cmpl, 0);
atomic_set(&tgtp->xmt_ls_rsp, 0);
atomic_set(&tgtp->xmt_ls_drop, 0);
atomic_set(&tgtp->xmt_ls_rsp_error, 0);
atomic_set(&tgtp->rcv_fcp_cmd_in, 0);
atomic_set(&tgtp->rcv_fcp_cmd_out, 0);
atomic_set(&tgtp->rcv_fcp_cmd_drop, 0);
- atomic_set(&tgtp->xmt_fcp_abort, 0);
atomic_set(&tgtp->xmt_fcp_drop, 0);
atomic_set(&tgtp->xmt_fcp_read_rsp, 0);
atomic_set(&tgtp->xmt_fcp_read, 0);
atomic_set(&tgtp->xmt_fcp_write, 0);
atomic_set(&tgtp->xmt_fcp_rsp, 0);
+ atomic_set(&tgtp->xmt_fcp_release, 0);
atomic_set(&tgtp->xmt_fcp_rsp_cmpl, 0);
atomic_set(&tgtp->xmt_fcp_rsp_error, 0);
atomic_set(&tgtp->xmt_fcp_rsp_drop, 0);
+ atomic_set(&tgtp->xmt_fcp_abort, 0);
+ atomic_set(&tgtp->xmt_fcp_abort_cmpl, 0);
+ atomic_set(&tgtp->xmt_abort_sol, 0);
+ atomic_set(&tgtp->xmt_abort_unsol, 0);
atomic_set(&tgtp->xmt_abort_rsp, 0);
atomic_set(&tgtp->xmt_abort_rsp_error, 0);
- atomic_set(&tgtp->xmt_abort_cmpl, 0);
}
return nbytes;
}
qp->assoc_qid, qp->q_cnt_1,
(unsigned long long)qp->q_cnt_4);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
- "\t\tWQID[%02d], QE-CNT[%04d], QE-SIZE[%04d], "
- "HOST-IDX[%04d], PORT-IDX[%04d]",
+ "\t\tWQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
+ "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]",
qp->queue_id, qp->entry_count,
qp->entry_size, qp->host_index,
- qp->hba_index);
+ qp->hba_index, qp->entry_repost);
len += snprintf(pbuffer + len,
LPFC_QUE_INFO_GET_BUF_SIZE - len, "\n");
return len;
qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2,
qp->q_cnt_3, (unsigned long long)qp->q_cnt_4);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
- "\tCQID[%02d], QE-CNT[%04d], QE-SIZE[%04d], "
- "HOST-IDX[%04d], PORT-IDX[%04d]",
+ "\tCQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
+ "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]",
qp->queue_id, qp->entry_count,
qp->entry_size, qp->host_index,
- qp->hba_index);
+ qp->hba_index, qp->entry_repost);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, "\n");
"\t\t%s RQ info: ", rqtype);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
"AssocCQID[%02d]: RQ-STAT[nopost:x%x nobuf:x%x "
- "trunc:x%x rcv:x%llx]\n",
+ "posted:x%x rcv:x%llx]\n",
qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2,
qp->q_cnt_3, (unsigned long long)qp->q_cnt_4);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
- "\t\tHQID[%02d], QE-CNT[%04d], QE-SIZE[%04d], "
- "HOST-IDX[%04d], PORT-IDX[%04d]\n",
+ "\t\tHQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
+ "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n",
qp->queue_id, qp->entry_count, qp->entry_size,
- qp->host_index, qp->hba_index);
+ qp->host_index, qp->hba_index, qp->entry_repost);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
- "\t\tDQID[%02d], QE-CNT[%04d], QE-SIZE[%04d], "
- "HOST-IDX[%04d], PORT-IDX[%04d]\n",
+ "\t\tDQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
+ "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n",
datqp->queue_id, datqp->entry_count,
datqp->entry_size, datqp->host_index,
- datqp->hba_index);
+ datqp->hba_index, datqp->entry_repost);
return len;
}
eqtype, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3,
(unsigned long long)qp->q_cnt_4);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
- "EQID[%02d], QE-CNT[%04d], QE-SIZE[%04d], "
- "HOST-IDX[%04d], PORT-IDX[%04d]",
+ "EQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
+ "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]",
qp->queue_id, qp->entry_count, qp->entry_size,
- qp->host_index, qp->hba_index);
+ qp->host_index, qp->hba_index, qp->entry_repost);
len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, "\n");
return len;
atomic_dec(&lpfc_debugfs_hba_count);
}
- debugfs_remove(lpfc_debugfs_root); /* lpfc */
- lpfc_debugfs_root = NULL;
+ if (atomic_read(&lpfc_debugfs_hba_count) == 0) {
+ debugfs_remove(lpfc_debugfs_root); /* lpfc */
+ lpfc_debugfs_root = NULL;
+ }
}
#endif
return;
#define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */
#define NLP_NVME_TARGET 0x20 /* entry is a NVME Target */
#define NLP_NVME_INITIATOR 0x40 /* entry is a NVME Initiator */
+#define NLP_NVME_DISCOVERY 0x80 /* entry has NVME disc srvc */
uint16_t nlp_fc4_type; /* FC types node supports. */
/* Assigned from GID_FF, only
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout);
+
+ /* If this is not a loop open failure, bail out */
+ if (!(irsp->ulpStatus == IOSTAT_LOCAL_REJECT &&
+ ((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
+ IOERR_LOOP_OPEN_FAILURE)))
+ goto flogifail;
+
/* FLOGI failed, so there is no fabric */
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
if (irsp->ulpStatus) {
/* Check for retry */
+ ndlp->fc4_prli_sent--;
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
- ndlp->fc4_prli_sent--;
goto out;
}
+
/* PRLI failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "2754 PRLI failure DID:%06X Status:x%x/x%x\n",
+ "2754 PRLI failure DID:%06X Status:x%x/x%x, "
+ "data: x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
- irsp->un.ulpWord[4]);
+ irsp->un.ulpWord[4], ndlp->fc4_prli_sent);
+
/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
if (lpfc_error_lost_link(irsp))
goto out;
*/
spin_lock_irq(&phba->hbalock);
pring = lpfc_phba_elsring(phba);
+
+ /* Bail out if we've no ELS wq, like in PCI error recovery case. */
+ if (unlikely(!pring)) {
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
if (phba->sli_rev == LPFC_SLI_REV4)
spin_lock(&pring->ring_lock);
lpfc_do_scr_ns_plogi(phba, vport);
goto out;
fdisc_failed:
- if (vport->fc_vport->vport_state != FC_VPORT_NO_FABRIC_RSCS)
+ if (vport->fc_vport &&
+ (vport->fc_vport->vport_state != FC_VPORT_NO_FABRIC_RSCS))
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
/* Cancel discovery timer */
lpfc_can_disctmo(vport);
pring = lpfc_phba_elsring(phba);
status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
status >>= (4*LPFC_ELS_RING);
- if ((status & HA_RXMASK) ||
- (pring->flag & LPFC_DEFERRED_RING_EVENT) ||
- (phba->hba_flag & HBA_SP_QUEUE_EVT)) {
+ if (pring && (status & HA_RXMASK ||
+ pring->flag & LPFC_DEFERRED_RING_EVENT ||
+ phba->hba_flag & HBA_SP_QUEUE_EVT)) {
if (pring->flag & LPFC_STOP_IOCB_EVENT) {
pring->flag |= LPFC_DEFERRED_RING_EVENT;
/* Set the lpfc data pending flag */
set_bit(LPFC_DATA_READY, &phba->data_flags);
} else {
- if (phba->link_state >= LPFC_LINK_UP) {
+ if (phba->link_state >= LPFC_LINK_UP ||
+ phba->link_flag & LS_MDS_LOOPBACK) {
pring->flag &= ~LPFC_DEFERRED_RING_EVENT;
lpfc_sli_handle_slow_ring_event(phba, pring,
(status &
#define LPFC_HDR_BUF_SIZE 128
#define LPFC_DATA_BUF_SIZE 2048
+#define LPFC_NVMET_DATA_BUF_SIZE 128
struct rq_context {
uint32_t word0;
#define lpfc_rq_context_rqe_count_SHIFT 16 /* Version 0 Only */
};
#define TXRDY_PAYLOAD_LEN 12
+#define CMD_SEND_FRAME 0xE1
+
+struct send_frame_wqe {
+ struct ulp_bde64 bde; /* words 0-2 */
+ uint32_t frame_len; /* word 3 */
+ uint32_t fc_hdr_wd0; /* word 4 */
+ uint32_t fc_hdr_wd1; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t fc_hdr_wd2; /* word 12 */
+ uint32_t fc_hdr_wd3; /* word 13 */
+ uint32_t fc_hdr_wd4; /* word 14 */
+ uint32_t fc_hdr_wd5; /* word 15 */
+};
union lpfc_wqe {
uint32_t words[16];
struct fcp_trsp64_wqe fcp_trsp;
struct fcp_tsend64_wqe fcp_tsend;
struct fcp_treceive64_wqe fcp_treceive;
-
+ struct send_frame_wqe send_frame;
};
union lpfc_wqe128 {
list_for_each_entry_safe(ctxp, ctxp_next, &nvmet_aborts, list) {
ctxp->flag &= ~(LPFC_NVMET_XBUSY | LPFC_NVMET_ABORT_OP);
- lpfc_nvmet_rq_post(phba, ctxp, &ctxp->rqb_buffer->hbuf);
+ lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
}
}
{
struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
uint16_t i, lxri, xri_cnt, els_xri_cnt;
- uint16_t nvmet_xri_cnt, tot_cnt;
+ uint16_t nvmet_xri_cnt;
LIST_HEAD(nvmet_sgl_list);
int rc;
* update on pci function's nvmet xri-sgl list
*/
els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
- nvmet_xri_cnt = phba->cfg_nvmet_mrq * phba->cfg_nvmet_mrq_post;
- tot_cnt = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
- if (nvmet_xri_cnt > tot_cnt) {
- phba->cfg_nvmet_mrq_post = tot_cnt / phba->cfg_nvmet_mrq;
- nvmet_xri_cnt = phba->cfg_nvmet_mrq * phba->cfg_nvmet_mrq_post;
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "6301 NVMET post-sgl count changed to %d\n",
- phba->cfg_nvmet_mrq_post);
- }
+
+ /* For NVMET, ALL remaining XRIs are dedicated for IO processing */
+ nvmet_xri_cnt = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
if (nvmet_xri_cnt > phba->sli4_hba.nvmet_xri_cnt) {
/* els xri-sgl expanded */
pmb->vport = phba->pport;
if (phba->sli4_hba.link_state.status != LPFC_FC_LA_TYPE_LINK_UP) {
+ phba->link_flag &= ~(LS_MDS_LINK_DOWN | LS_MDS_LOOPBACK);
+
+ switch (phba->sli4_hba.link_state.status) {
+ case LPFC_FC_LA_TYPE_MDS_LINK_DOWN:
+ phba->link_flag |= LS_MDS_LINK_DOWN;
+ break;
+ case LPFC_FC_LA_TYPE_MDS_LOOPBACK:
+ phba->link_flag |= LS_MDS_LOOPBACK;
+ break;
+ default:
+ break;
+ }
+
/* Parse and translate status field */
mb = &pmb->u.mb;
mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba,
spin_lock_init(&phba->sli4_hba.abts_nvme_buf_list_lock);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvme_buf_list);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_ctx_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_io_wait_list);
+
/* Fast-path XRI aborted CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_nvme_xri_aborted_work_queue);
}
/* This abort list used by worker thread */
spin_lock_init(&phba->sli4_hba.sgl_list_lock);
spin_lock_init(&phba->sli4_hba.nvmet_io_lock);
+ spin_lock_init(&phba->sli4_hba.nvmet_io_wait_lock);
/*
* Initialize driver internal slow-path work queues
for (i = 0; i < lpfc_enable_nvmet_cnt; i++) {
if (wwn == lpfc_enable_nvmet[i]) {
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
+ if (lpfc_nvmet_mem_alloc(phba))
+ break;
+
+ phba->nvmet_support = 1; /* a match */
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6017 NVME Target %016llx\n",
wwn);
- phba->nvmet_support = 1; /* a match */
#else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6021 Can't enable NVME Target."
" NVME_TARGET_FC infrastructure"
" is not in kernel\n");
#endif
+ break;
}
}
}
*
* This routine is invoked to free the driver's IOCB list and memory.
**/
-static void
+void
lpfc_free_iocb_list(struct lpfc_hba *phba)
{
struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
* 0 - successful
* other values - error
**/
-static int
+int
lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
{
struct lpfc_iocbq *iocbq_entry = NULL;
uint16_t rpi_limit, curr_rpi_range;
struct lpfc_dmabuf *dmabuf;
struct lpfc_rpi_hdr *rpi_hdr;
- uint32_t rpi_count;
/*
* If the SLI4 port supports extents, posting the rpi header isn't
return NULL;
/* The limit on the logical index is just the max_rpi count. */
- rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
- phba->sli4_hba.max_cfg_param.max_rpi - 1;
+ rpi_limit = phba->sli4_hba.max_cfg_param.max_rpi;
spin_lock_irq(&phba->hbalock);
/*
curr_rpi_range = phba->sli4_hba.next_rpi;
spin_unlock_irq(&phba->hbalock);
- /*
- * The port has a limited number of rpis. The increment here
- * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
- * and to allow the full max_rpi range per port.
- */
- if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
- rpi_count = rpi_limit - curr_rpi_range;
- else
- rpi_count = LPFC_RPI_HDR_COUNT;
-
- if (!rpi_count)
+ /* Reached full RPI range */
+ if (curr_rpi_range == rpi_limit)
return NULL;
+
/*
* First allocate the protocol header region for the port. The
* port expects a 4KB DMA-mapped memory region that is 4K aligned.
/* The rpi_hdr stores the logical index only. */
rpi_hdr->start_rpi = curr_rpi_range;
+ rpi_hdr->next_rpi = phba->sli4_hba.next_rpi + LPFC_RPI_HDR_COUNT;
list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
- /*
- * The next_rpi stores the next logical module-64 rpi value used
- * to post physical rpis in subsequent rpi postings.
- */
- phba->sli4_hba.next_rpi += rpi_count;
spin_unlock_irq(&phba->hbalock);
return rpi_hdr;
/* Create NVMET Receive Queue for header */
qdesc = lpfc_sli4_queue_alloc(phba,
phba->sli4_hba.rq_esize,
- phba->sli4_hba.rq_ecount);
+ LPFC_NVMET_RQE_DEF_COUNT);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3146 Failed allocate "
/* Create NVMET Receive Queue for data */
qdesc = lpfc_sli4_queue_alloc(phba,
phba->sli4_hba.rq_esize,
- phba->sli4_hba.rq_ecount);
+ LPFC_NVMET_RQE_DEF_COUNT);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3156 Failed allocate "
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list);
}
-int
-lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
- struct lpfc_queue *drq, int count)
-{
- int rc, i;
- struct lpfc_rqe hrqe;
- struct lpfc_rqe drqe;
- struct lpfc_rqb *rqbp;
- struct rqb_dmabuf *rqb_buffer;
- LIST_HEAD(rqb_buf_list);
-
- rqbp = hrq->rqbp;
- for (i = 0; i < count; i++) {
- rqb_buffer = (rqbp->rqb_alloc_buffer)(phba);
- if (!rqb_buffer)
- break;
- rqb_buffer->hrq = hrq;
- rqb_buffer->drq = drq;
- list_add_tail(&rqb_buffer->hbuf.list, &rqb_buf_list);
- }
- while (!list_empty(&rqb_buf_list)) {
- list_remove_head(&rqb_buf_list, rqb_buffer, struct rqb_dmabuf,
- hbuf.list);
-
- hrqe.address_lo = putPaddrLow(rqb_buffer->hbuf.phys);
- hrqe.address_hi = putPaddrHigh(rqb_buffer->hbuf.phys);
- drqe.address_lo = putPaddrLow(rqb_buffer->dbuf.phys);
- drqe.address_hi = putPaddrHigh(rqb_buffer->dbuf.phys);
- rc = lpfc_sli4_rq_put(hrq, drq, &hrqe, &drqe);
- if (rc < 0) {
- (rqbp->rqb_free_buffer)(phba, rqb_buffer);
- } else {
- list_add_tail(&rqb_buffer->hbuf.list,
- &rqbp->rqb_buffer_list);
- rqbp->buffer_count++;
- }
- }
- return 1;
-}
-
int
lpfc_free_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *rq)
{
goto out_destroy;
}
- lpfc_rq_adjust_repost(phba, phba->sli4_hba.hdr_rq, LPFC_ELS_HBQ);
- lpfc_rq_adjust_repost(phba, phba->sli4_hba.dat_rq, LPFC_ELS_HBQ);
-
rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
phba->sli4_hba.els_cq, LPFC_USOL);
if (rc) {
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
- int error, cnt;
+ int error;
uint32_t cfg_mode, intr_mode;
/* Allocate memory for HBA structure */
goto out_unset_pci_mem_s4;
}
- cnt = phba->cfg_iocb_cnt * 1024;
- if (phba->nvmet_support)
- cnt += phba->cfg_nvmet_mrq_post * phba->cfg_nvmet_mrq;
-
- /* Initialize and populate the iocb list per host */
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2821 initialize iocb list %d total %d\n",
- phba->cfg_iocb_cnt, cnt);
- error = lpfc_init_iocb_list(phba, cnt);
-
- if (error) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1413 Failed to initialize iocb list.\n");
- goto out_unset_driver_resource_s4;
- }
-
INIT_LIST_HEAD(&phba->active_rrq_list);
INIT_LIST_HEAD(&phba->fcf.fcf_pri_list);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1414 Failed to set up driver resource.\n");
- goto out_free_iocb_list;
+ goto out_unset_driver_resource_s4;
}
/* Get the default values for Model Name and Description */
lpfc_destroy_shost(phba);
out_unset_driver_resource:
lpfc_unset_driver_resource_phase2(phba);
-out_free_iocb_list:
- lpfc_free_iocb_list(phba);
out_unset_driver_resource_s4:
lpfc_sli4_driver_resource_unset(phba);
out_unset_pci_mem_s4:
return -ENOMEM;
}
+int
+lpfc_nvmet_mem_alloc(struct lpfc_hba *phba)
+{
+ phba->lpfc_nvmet_drb_pool =
+ pci_pool_create("lpfc_nvmet_drb_pool",
+ phba->pcidev, LPFC_NVMET_DATA_BUF_SIZE,
+ SGL_ALIGN_SZ, 0);
+ if (!phba->lpfc_nvmet_drb_pool) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6024 Can't enable NVME Target - no memory\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
/**
* lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
/* Free HBQ pools */
lpfc_sli_hbqbuf_free_all(phba);
+ if (phba->lpfc_nvmet_drb_pool)
+ pci_pool_destroy(phba->lpfc_nvmet_drb_pool);
+ phba->lpfc_nvmet_drb_pool = NULL;
if (phba->lpfc_drb_pool)
pci_pool_destroy(phba->lpfc_drb_pool);
phba->lpfc_drb_pool = NULL;
lpfc_sli4_nvmet_alloc(struct lpfc_hba *phba)
{
struct rqb_dmabuf *dma_buf;
- struct lpfc_iocbq *nvmewqe;
- union lpfc_wqe128 *wqe;
dma_buf = kzalloc(sizeof(struct rqb_dmabuf), GFP_KERNEL);
if (!dma_buf)
kfree(dma_buf);
return NULL;
}
- dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
- &dma_buf->dbuf.phys);
+ dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_nvmet_drb_pool,
+ GFP_KERNEL, &dma_buf->dbuf.phys);
if (!dma_buf->dbuf.virt) {
pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
dma_buf->hbuf.phys);
kfree(dma_buf);
return NULL;
}
- dma_buf->total_size = LPFC_DATA_BUF_SIZE;
-
- dma_buf->context = kzalloc(sizeof(struct lpfc_nvmet_rcv_ctx),
- GFP_KERNEL);
- if (!dma_buf->context) {
- pci_pool_free(phba->lpfc_drb_pool, dma_buf->dbuf.virt,
- dma_buf->dbuf.phys);
- pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
- dma_buf->hbuf.phys);
- kfree(dma_buf);
- return NULL;
- }
-
- dma_buf->iocbq = lpfc_sli_get_iocbq(phba);
- if (!dma_buf->iocbq) {
- kfree(dma_buf->context);
- pci_pool_free(phba->lpfc_drb_pool, dma_buf->dbuf.virt,
- dma_buf->dbuf.phys);
- pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
- dma_buf->hbuf.phys);
- kfree(dma_buf);
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
- "2621 Ran out of nvmet iocb/WQEs\n");
- return NULL;
- }
- dma_buf->iocbq->iocb_flag = LPFC_IO_NVMET;
- nvmewqe = dma_buf->iocbq;
- wqe = (union lpfc_wqe128 *)&nvmewqe->wqe;
- /* Initialize WQE */
- memset(wqe, 0, sizeof(union lpfc_wqe));
- /* Word 7 */
- bf_set(wqe_ct, &wqe->generic.wqe_com, SLI4_CT_RPI);
- bf_set(wqe_class, &wqe->generic.wqe_com, CLASS3);
- bf_set(wqe_pu, &wqe->generic.wqe_com, 1);
- /* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
- bf_set(wqe_qosd, &wqe->generic.wqe_com, 0);
-
- dma_buf->iocbq->context1 = NULL;
- spin_lock(&phba->sli4_hba.sgl_list_lock);
- dma_buf->sglq = __lpfc_sli_get_nvmet_sglq(phba, dma_buf->iocbq);
- spin_unlock(&phba->sli4_hba.sgl_list_lock);
- if (!dma_buf->sglq) {
- lpfc_sli_release_iocbq(phba, dma_buf->iocbq);
- kfree(dma_buf->context);
- pci_pool_free(phba->lpfc_drb_pool, dma_buf->dbuf.virt,
- dma_buf->dbuf.phys);
- pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
- dma_buf->hbuf.phys);
- kfree(dma_buf);
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
- "6132 Ran out of nvmet XRIs\n");
- return NULL;
- }
+ dma_buf->total_size = LPFC_NVMET_DATA_BUF_SIZE;
return dma_buf;
}
void
lpfc_sli4_nvmet_free(struct lpfc_hba *phba, struct rqb_dmabuf *dmab)
{
- unsigned long flags;
-
- __lpfc_clear_active_sglq(phba, dmab->sglq->sli4_lxritag);
- dmab->sglq->state = SGL_FREED;
- dmab->sglq->ndlp = NULL;
-
- spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock, flags);
- list_add_tail(&dmab->sglq->list, &phba->sli4_hba.lpfc_nvmet_sgl_list);
- spin_unlock_irqrestore(&phba->sli4_hba.sgl_list_lock, flags);
-
- lpfc_sli_release_iocbq(phba, dmab->iocbq);
- kfree(dmab->context);
pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
- pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+ pci_pool_free(phba->lpfc_nvmet_drb_pool,
+ dmab->dbuf.virt, dmab->dbuf.phys);
kfree(dmab);
}
rc = lpfc_sli4_rq_put(rqb_entry->hrq, rqb_entry->drq, &hrqe, &drqe);
if (rc < 0) {
(rqbp->rqb_free_buffer)(phba, rqb_entry);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6409 Cannot post to RQ %d: %x %x\n",
+ rqb_entry->hrq->queue_id,
+ rqb_entry->hrq->host_index,
+ rqb_entry->hrq->hba_index);
} else {
list_add_tail(&rqb_entry->hbuf.list, &rqbp->rqb_buffer_list);
rqbp->buffer_count++;
/* Target driver cannot solicit NVME FB. */
if (bf_get_be32(prli_tgt, nvpr)) {
+ /* Complete the nvme target roles. The transport
+ * needs to know if the rport is capable of
+ * discovery in addition to its role.
+ */
ndlp->nlp_type |= NLP_NVME_TARGET;
+ if (bf_get_be32(prli_disc, nvpr))
+ ndlp->nlp_type |= NLP_NVME_DISCOVERY;
if ((bf_get_be32(prli_fba, nvpr) == 1) &&
(bf_get_be32(prli_fb_sz, nvpr) > 0) &&
(phba->cfg_nvme_enable_fb) &&
}
/**
- * lpfc_nvmet_rq_post - Repost a NVMET RQ DMA buffer and clean up context
+ * lpfc_nvmet_ctxbuf_post - Repost a NVMET RQ DMA buffer and clean up context
* @phba: HBA buffer is associated with
* @ctxp: context to clean up
* @mp: Buffer to free
* Returns: None
**/
void
-lpfc_nvmet_rq_post(struct lpfc_hba *phba, struct lpfc_nvmet_rcv_ctx *ctxp,
- struct lpfc_dmabuf *mp)
+lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf)
{
- if (ctxp) {
- if (ctxp->flag)
- lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
- "6314 rq_post ctx xri x%x flag x%x\n",
- ctxp->oxid, ctxp->flag);
-
- if (ctxp->txrdy) {
- pci_pool_free(phba->txrdy_payload_pool, ctxp->txrdy,
- ctxp->txrdy_phys);
- ctxp->txrdy = NULL;
- ctxp->txrdy_phys = 0;
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
+ struct lpfc_nvmet_rcv_ctx *ctxp = ctx_buf->context;
+ struct lpfc_nvmet_tgtport *tgtp;
+ struct fc_frame_header *fc_hdr;
+ struct rqb_dmabuf *nvmebuf;
+ struct lpfc_dmabuf *hbufp;
+ uint32_t *payload;
+ uint32_t size, oxid, sid, rc;
+ unsigned long iflag;
+
+ if (ctxp->txrdy) {
+ pci_pool_free(phba->txrdy_payload_pool, ctxp->txrdy,
+ ctxp->txrdy_phys);
+ ctxp->txrdy = NULL;
+ ctxp->txrdy_phys = 0;
+ }
+ ctxp->state = LPFC_NVMET_STE_FREE;
+
+ spin_lock_irqsave(&phba->sli4_hba.nvmet_io_wait_lock, iflag);
+ if (phba->sli4_hba.nvmet_io_wait_cnt) {
+ hbufp = &nvmebuf->hbuf;
+ list_remove_head(&phba->sli4_hba.lpfc_nvmet_io_wait_list,
+ nvmebuf, struct rqb_dmabuf,
+ hbuf.list);
+ phba->sli4_hba.nvmet_io_wait_cnt--;
+ spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_wait_lock,
+ iflag);
+
+ fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
+ oxid = be16_to_cpu(fc_hdr->fh_ox_id);
+ tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
+ payload = (uint32_t *)(nvmebuf->dbuf.virt);
+ size = nvmebuf->bytes_recv;
+ sid = sli4_sid_from_fc_hdr(fc_hdr);
+
+ ctxp = (struct lpfc_nvmet_rcv_ctx *)ctx_buf->context;
+ memset(ctxp, 0, sizeof(ctxp->ctx));
+ ctxp->wqeq = NULL;
+ ctxp->txrdy = NULL;
+ ctxp->offset = 0;
+ ctxp->phba = phba;
+ ctxp->size = size;
+ ctxp->oxid = oxid;
+ ctxp->sid = sid;
+ ctxp->state = LPFC_NVMET_STE_RCV;
+ ctxp->entry_cnt = 1;
+ ctxp->flag = 0;
+ ctxp->ctxbuf = ctx_buf;
+ spin_lock_init(&ctxp->ctxlock);
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (phba->ktime_on) {
+ ctxp->ts_cmd_nvme = ktime_get_ns();
+ ctxp->ts_isr_cmd = ctxp->ts_cmd_nvme;
+ ctxp->ts_nvme_data = 0;
+ ctxp->ts_data_wqput = 0;
+ ctxp->ts_isr_data = 0;
+ ctxp->ts_data_nvme = 0;
+ ctxp->ts_nvme_status = 0;
+ ctxp->ts_status_wqput = 0;
+ ctxp->ts_isr_status = 0;
+ ctxp->ts_status_nvme = 0;
}
- ctxp->state = LPFC_NVMET_STE_FREE;
+#endif
+ atomic_inc(&tgtp->rcv_fcp_cmd_in);
+ /*
+ * The calling sequence should be:
+ * nvmet_fc_rcv_fcp_req->lpfc_nvmet_xmt_fcp_op/cmp- req->done
+ * lpfc_nvmet_xmt_fcp_op_cmp should free the allocated ctxp.
+ * When we return from nvmet_fc_rcv_fcp_req, all relevant info
+ * the NVME command / FC header is stored.
+ * A buffer has already been reposted for this IO, so just free
+ * the nvmebuf.
+ */
+ rc = nvmet_fc_rcv_fcp_req(phba->targetport, &ctxp->ctx.fcp_req,
+ payload, size);
+
+ /* Process FCP command */
+ if (rc == 0) {
+ atomic_inc(&tgtp->rcv_fcp_cmd_out);
+ nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf);
+ return;
+ }
+
+ atomic_inc(&tgtp->rcv_fcp_cmd_drop);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "2582 FCP Drop IO x%x: err x%x: x%x x%x x%x\n",
+ ctxp->oxid, rc,
+ atomic_read(&tgtp->rcv_fcp_cmd_in),
+ atomic_read(&tgtp->rcv_fcp_cmd_out),
+ atomic_read(&tgtp->xmt_fcp_release));
+
+ lpfc_nvmet_defer_release(phba, ctxp);
+ lpfc_nvmet_unsol_fcp_issue_abort(phba, ctxp, sid, oxid);
+ nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf);
+ return;
}
- lpfc_rq_buf_free(phba, mp);
+ spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_wait_lock, iflag);
+
+ spin_lock_irqsave(&phba->sli4_hba.nvmet_io_lock, iflag);
+ list_add_tail(&ctx_buf->list,
+ &phba->sli4_hba.lpfc_nvmet_ctx_list);
+ phba->sli4_hba.nvmet_ctx_cnt++;
+ spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_lock, iflag);
+#endif
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
"6150 LS Drop IO x%x: Prep\n",
ctxp->oxid);
lpfc_in_buf_free(phba, &nvmebuf->dbuf);
+ atomic_inc(&nvmep->xmt_ls_abort);
lpfc_nvmet_unsol_ls_issue_abort(phba, ctxp,
ctxp->sid, ctxp->oxid);
return -ENOMEM;
lpfc_nlp_put(nvmewqeq->context1);
lpfc_in_buf_free(phba, &nvmebuf->dbuf);
+ atomic_inc(&nvmep->xmt_ls_abort);
lpfc_nvmet_unsol_ls_issue_abort(phba, ctxp, ctxp->sid, ctxp->oxid);
return -ENXIO;
}
lpfc_nvmeio_data(phba, "NVMET FCP CMND: xri x%x op x%x len x%x\n",
ctxp->oxid, rsp->op, rsp->rsplen);
+ ctxp->flag |= LPFC_NVMET_IO_INP;
rc = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, nvmewqeq);
if (rc == WQE_SUCCESS) {
- ctxp->flag |= LPFC_NVMET_IO_INP;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (!phba->ktime_on)
return 0;
lpfc_nvmet_xmt_fcp_release(struct nvmet_fc_target_port *tgtport,
struct nvmefc_tgt_fcp_req *rsp)
{
+ struct lpfc_nvmet_tgtport *lpfc_nvmep = tgtport->private;
struct lpfc_nvmet_rcv_ctx *ctxp =
container_of(rsp, struct lpfc_nvmet_rcv_ctx, ctx.fcp_req);
struct lpfc_hba *phba = ctxp->phba;
lpfc_nvmeio_data(phba, "NVMET FCP FREE: xri x%x ste %d\n", ctxp->oxid,
ctxp->state, 0);
+ atomic_inc(&lpfc_nvmep->xmt_fcp_release);
+
if (aborting)
return;
- lpfc_nvmet_rq_post(phba, ctxp, &ctxp->rqb_buffer->hbuf);
+ lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
}
static struct nvmet_fc_target_template lpfc_tgttemplate = {
.target_priv_sz = sizeof(struct lpfc_nvmet_tgtport),
};
+void
+lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
+{
+ struct lpfc_nvmet_ctxbuf *ctx_buf, *next_ctx_buf;
+ unsigned long flags;
+
+ list_for_each_entry_safe(
+ ctx_buf, next_ctx_buf,
+ &phba->sli4_hba.lpfc_nvmet_ctx_list, list) {
+ spin_lock_irqsave(
+ &phba->sli4_hba.abts_nvme_buf_list_lock, flags);
+ list_del_init(&ctx_buf->list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_nvme_buf_list_lock, flags);
+ __lpfc_clear_active_sglq(phba,
+ ctx_buf->sglq->sli4_lxritag);
+ ctx_buf->sglq->state = SGL_FREED;
+ ctx_buf->sglq->ndlp = NULL;
+
+ spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock, flags);
+ list_add_tail(&ctx_buf->sglq->list,
+ &phba->sli4_hba.lpfc_nvmet_sgl_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.sgl_list_lock,
+ flags);
+
+ lpfc_sli_release_iocbq(phba, ctx_buf->iocbq);
+ kfree(ctx_buf->context);
+ }
+}
+
+int
+lpfc_nvmet_setup_io_context(struct lpfc_hba *phba)
+{
+ struct lpfc_nvmet_ctxbuf *ctx_buf;
+ struct lpfc_iocbq *nvmewqe;
+ union lpfc_wqe128 *wqe;
+ int i;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
+ "6403 Allocate NVMET resources for %d XRIs\n",
+ phba->sli4_hba.nvmet_xri_cnt);
+
+ /* For all nvmet xris, allocate resources needed to process a
+ * received command on a per xri basis.
+ */
+ for (i = 0; i < phba->sli4_hba.nvmet_xri_cnt; i++) {
+ ctx_buf = kzalloc(sizeof(*ctx_buf), GFP_KERNEL);
+ if (!ctx_buf) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ "6404 Ran out of memory for NVMET\n");
+ return -ENOMEM;
+ }
+
+ ctx_buf->context = kzalloc(sizeof(*ctx_buf->context),
+ GFP_KERNEL);
+ if (!ctx_buf->context) {
+ kfree(ctx_buf);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ "6405 Ran out of NVMET "
+ "context memory\n");
+ return -ENOMEM;
+ }
+ ctx_buf->context->ctxbuf = ctx_buf;
+
+ ctx_buf->iocbq = lpfc_sli_get_iocbq(phba);
+ if (!ctx_buf->iocbq) {
+ kfree(ctx_buf->context);
+ kfree(ctx_buf);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ "6406 Ran out of NVMET iocb/WQEs\n");
+ return -ENOMEM;
+ }
+ ctx_buf->iocbq->iocb_flag = LPFC_IO_NVMET;
+ nvmewqe = ctx_buf->iocbq;
+ wqe = (union lpfc_wqe128 *)&nvmewqe->wqe;
+ /* Initialize WQE */
+ memset(wqe, 0, sizeof(union lpfc_wqe));
+ /* Word 7 */
+ bf_set(wqe_ct, &wqe->generic.wqe_com, SLI4_CT_RPI);
+ bf_set(wqe_class, &wqe->generic.wqe_com, CLASS3);
+ bf_set(wqe_pu, &wqe->generic.wqe_com, 1);
+ /* Word 10 */
+ bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
+ bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
+ bf_set(wqe_qosd, &wqe->generic.wqe_com, 0);
+
+ ctx_buf->iocbq->context1 = NULL;
+ spin_lock(&phba->sli4_hba.sgl_list_lock);
+ ctx_buf->sglq = __lpfc_sli_get_nvmet_sglq(phba, ctx_buf->iocbq);
+ spin_unlock(&phba->sli4_hba.sgl_list_lock);
+ if (!ctx_buf->sglq) {
+ lpfc_sli_release_iocbq(phba, ctx_buf->iocbq);
+ kfree(ctx_buf->context);
+ kfree(ctx_buf);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ "6407 Ran out of NVMET XRIs\n");
+ return -ENOMEM;
+ }
+ spin_lock(&phba->sli4_hba.nvmet_io_lock);
+ list_add_tail(&ctx_buf->list,
+ &phba->sli4_hba.lpfc_nvmet_ctx_list);
+ spin_unlock(&phba->sli4_hba.nvmet_io_lock);
+ }
+ phba->sli4_hba.nvmet_ctx_cnt = phba->sli4_hba.nvmet_xri_cnt;
+ return 0;
+}
+
int
lpfc_nvmet_create_targetport(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_nvmet_tgtport *tgtp;
struct nvmet_fc_port_info pinfo;
- int error = 0;
+ int error;
if (phba->targetport)
return 0;
+ error = lpfc_nvmet_setup_io_context(phba);
+ if (error)
+ return error;
+
memset(&pinfo, 0, sizeof(struct nvmet_fc_port_info));
pinfo.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
pinfo.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
&phba->pcidev->dev,
&phba->targetport);
#else
- error = -ENOMEM;
+ error = -ENOENT;
#endif
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
"6025 Cannot register NVME targetport "
"x%x\n", error);
phba->targetport = NULL;
+
+ lpfc_nvmet_cleanup_io_context(phba);
+
} else {
tgtp = (struct lpfc_nvmet_tgtport *)
phba->targetport->private;
atomic_set(&tgtp->rcv_ls_req_out, 0);
atomic_set(&tgtp->rcv_ls_req_drop, 0);
atomic_set(&tgtp->xmt_ls_abort, 0);
+ atomic_set(&tgtp->xmt_ls_abort_cmpl, 0);
atomic_set(&tgtp->xmt_ls_rsp, 0);
atomic_set(&tgtp->xmt_ls_drop, 0);
atomic_set(&tgtp->xmt_ls_rsp_error, 0);
atomic_set(&tgtp->rcv_fcp_cmd_in, 0);
atomic_set(&tgtp->rcv_fcp_cmd_out, 0);
atomic_set(&tgtp->rcv_fcp_cmd_drop, 0);
- atomic_set(&tgtp->xmt_fcp_abort, 0);
atomic_set(&tgtp->xmt_fcp_drop, 0);
atomic_set(&tgtp->xmt_fcp_read_rsp, 0);
atomic_set(&tgtp->xmt_fcp_read, 0);
atomic_set(&tgtp->xmt_fcp_write, 0);
atomic_set(&tgtp->xmt_fcp_rsp, 0);
+ atomic_set(&tgtp->xmt_fcp_release, 0);
atomic_set(&tgtp->xmt_fcp_rsp_cmpl, 0);
atomic_set(&tgtp->xmt_fcp_rsp_error, 0);
atomic_set(&tgtp->xmt_fcp_rsp_drop, 0);
+ atomic_set(&tgtp->xmt_fcp_abort, 0);
+ atomic_set(&tgtp->xmt_fcp_abort_cmpl, 0);
+ atomic_set(&tgtp->xmt_abort_unsol, 0);
+ atomic_set(&tgtp->xmt_abort_sol, 0);
atomic_set(&tgtp->xmt_abort_rsp, 0);
atomic_set(&tgtp->xmt_abort_rsp_error, 0);
- atomic_set(&tgtp->xmt_abort_cmpl, 0);
}
return error;
}
list_for_each_entry_safe(ctxp, next_ctxp,
&phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
list) {
- if (ctxp->rqb_buffer->sglq->sli4_xritag != xri)
+ if (ctxp->ctxbuf->sglq->sli4_xritag != xri)
continue;
/* Check if we already received a free context call
(ndlp->nlp_state == NLP_STE_UNMAPPED_NODE ||
ndlp->nlp_state == NLP_STE_MAPPED_NODE)) {
lpfc_set_rrq_active(phba, ndlp,
- ctxp->rqb_buffer->sglq->sli4_lxritag,
+ ctxp->ctxbuf->sglq->sli4_lxritag,
rxid, 1);
lpfc_sli4_abts_err_handler(phba, ndlp, axri);
}
"6318 XB aborted %x flg x%x (%x)\n",
ctxp->oxid, ctxp->flag, released);
if (released)
- lpfc_nvmet_rq_post(phba, ctxp,
- &ctxp->rqb_buffer->hbuf);
+ lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
+
if (rrq_empty)
lpfc_worker_wake_up(phba);
return;
list_for_each_entry_safe(ctxp, next_ctxp,
&phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
list) {
- if (ctxp->rqb_buffer->sglq->sli4_xritag != xri)
+ if (ctxp->ctxbuf->sglq->sli4_xritag != xri)
continue;
spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
init_completion(&tgtp->tport_unreg_done);
nvmet_fc_unregister_targetport(phba->targetport);
wait_for_completion_timeout(&tgtp->tport_unreg_done, 5);
+ lpfc_nvmet_cleanup_io_context(phba);
}
phba->targetport = NULL;
#endif
oxid = 0;
size = 0;
sid = 0;
+ ctxp = NULL;
goto dropit;
}
struct lpfc_nvmet_rcv_ctx *ctxp;
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
+ struct lpfc_nvmet_ctxbuf *ctx_buf;
uint32_t *payload;
- uint32_t size, oxid, sid, rc;
+ uint32_t size, oxid, sid, rc, qno;
+ unsigned long iflag;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint32_t id;
#endif
+ ctx_buf = NULL;
if (!nvmebuf || !phba->targetport) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
- "6157 FCP Drop IO\n");
+ "6157 NVMET FCP Drop IO\n");
oxid = 0;
size = 0;
sid = 0;
+ ctxp = NULL;
goto dropit;
}
+ spin_lock_irqsave(&phba->sli4_hba.nvmet_io_lock, iflag);
+ if (phba->sli4_hba.nvmet_ctx_cnt) {
+ list_remove_head(&phba->sli4_hba.lpfc_nvmet_ctx_list,
+ ctx_buf, struct lpfc_nvmet_ctxbuf, list);
+ phba->sli4_hba.nvmet_ctx_cnt--;
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_lock, iflag);
- tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
- payload = (uint32_t *)(nvmebuf->dbuf.virt);
fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
- size = nvmebuf->bytes_recv;
oxid = be16_to_cpu(fc_hdr->fh_ox_id);
- sid = sli4_sid_from_fc_hdr(fc_hdr);
+ size = nvmebuf->bytes_recv;
- ctxp = (struct lpfc_nvmet_rcv_ctx *)nvmebuf->context;
- if (ctxp == NULL) {
- atomic_inc(&tgtp->rcv_fcp_cmd_drop);
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
- "6158 FCP Drop IO x%x: Alloc\n",
- oxid);
- lpfc_nvmet_rq_post(phba, NULL, &nvmebuf->hbuf);
- /* Cannot send ABTS without context */
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (phba->cpucheck_on & LPFC_CHECK_NVMET_RCV) {
+ id = smp_processor_id();
+ if (id < LPFC_CHECK_CPU_CNT)
+ phba->cpucheck_rcv_io[id]++;
+ }
+#endif
+
+ lpfc_nvmeio_data(phba, "NVMET FCP RCV: xri x%x sz %d CPU %02x\n",
+ oxid, size, smp_processor_id());
+
+ if (!ctx_buf) {
+ /* Queue this NVME IO to process later */
+ spin_lock_irqsave(&phba->sli4_hba.nvmet_io_wait_lock, iflag);
+ list_add_tail(&nvmebuf->hbuf.list,
+ &phba->sli4_hba.lpfc_nvmet_io_wait_list);
+ phba->sli4_hba.nvmet_io_wait_cnt++;
+ phba->sli4_hba.nvmet_io_wait_total++;
+ spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_wait_lock,
+ iflag);
+
+ /* Post a brand new DMA buffer to RQ */
+ qno = nvmebuf->idx;
+ lpfc_post_rq_buffer(
+ phba, phba->sli4_hba.nvmet_mrq_hdr[qno],
+ phba->sli4_hba.nvmet_mrq_data[qno], 1, qno);
return;
}
+
+ tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
+ payload = (uint32_t *)(nvmebuf->dbuf.virt);
+ sid = sli4_sid_from_fc_hdr(fc_hdr);
+
+ ctxp = (struct lpfc_nvmet_rcv_ctx *)ctx_buf->context;
memset(ctxp, 0, sizeof(ctxp->ctx));
ctxp->wqeq = NULL;
ctxp->txrdy = NULL;
ctxp->oxid = oxid;
ctxp->sid = sid;
ctxp->state = LPFC_NVMET_STE_RCV;
- ctxp->rqb_buffer = nvmebuf;
ctxp->entry_cnt = 1;
ctxp->flag = 0;
+ ctxp->ctxbuf = ctx_buf;
spin_lock_init(&ctxp->ctxlock);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
ctxp->ts_isr_status = 0;
ctxp->ts_status_nvme = 0;
}
-
- if (phba->cpucheck_on & LPFC_CHECK_NVMET_RCV) {
- id = smp_processor_id();
- if (id < LPFC_CHECK_CPU_CNT)
- phba->cpucheck_rcv_io[id]++;
- }
#endif
- lpfc_nvmeio_data(phba, "NVMET FCP RCV: xri x%x sz %d CPU %02x\n",
- oxid, size, smp_processor_id());
-
atomic_inc(&tgtp->rcv_fcp_cmd_in);
/*
* The calling sequence should be:
* nvmet_fc_rcv_fcp_req -> lpfc_nvmet_xmt_fcp_op/cmp -> req->done
* lpfc_nvmet_xmt_fcp_op_cmp should free the allocated ctxp.
+ * When we return from nvmet_fc_rcv_fcp_req, all relevant info in
+ * the NVME command / FC header is stored, so we are free to repost
+ * the buffer.
*/
rc = nvmet_fc_rcv_fcp_req(phba->targetport, &ctxp->ctx.fcp_req,
payload, size);
/* Process FCP command */
if (rc == 0) {
atomic_inc(&tgtp->rcv_fcp_cmd_out);
+ lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */
return;
}
atomic_inc(&tgtp->rcv_fcp_cmd_drop);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
- "6159 FCP Drop IO x%x: err x%x\n",
- ctxp->oxid, rc);
+ "6159 FCP Drop IO x%x: err x%x: x%x x%x x%x\n",
+ ctxp->oxid, rc,
+ atomic_read(&tgtp->rcv_fcp_cmd_in),
+ atomic_read(&tgtp->rcv_fcp_cmd_out),
+ atomic_read(&tgtp->xmt_fcp_release));
dropit:
lpfc_nvmeio_data(phba, "NVMET FCP DROP: xri x%x sz %d from %06x\n",
oxid, size, sid);
if (oxid) {
+ lpfc_nvmet_defer_release(phba, ctxp);
lpfc_nvmet_unsol_fcp_issue_abort(phba, ctxp, sid, oxid);
+ lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */
return;
}
- if (nvmebuf) {
- nvmebuf->iocbq->hba_wqidx = 0;
- /* We assume a rcv'ed cmd ALWAYs fits into 1 buffer */
- lpfc_nvmet_rq_post(phba, NULL, &nvmebuf->hbuf);
- }
+ if (ctx_buf)
+ lpfc_nvmet_ctxbuf_post(phba, ctx_buf);
+
+ if (nvmebuf)
+ lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */
#endif
}
uint64_t isr_timestamp)
{
if (phba->nvmet_support == 0) {
- lpfc_nvmet_rq_post(phba, NULL, &nvmebuf->hbuf);
+ lpfc_rq_buf_free(phba, &nvmebuf->hbuf);
return;
}
lpfc_nvmet_unsol_fcp_buffer(phba, pring, nvmebuf,
nvmewqe = ctxp->wqeq;
if (nvmewqe == NULL) {
/* Allocate buffer for command wqe */
- nvmewqe = ctxp->rqb_buffer->iocbq;
+ nvmewqe = ctxp->ctxbuf->iocbq;
if (nvmewqe == NULL) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
"6110 lpfc_nvmet_prep_fcp_wqe: No "
return NULL;
}
- sgl = (struct sli4_sge *)ctxp->rqb_buffer->sglq->sgl;
+ sgl = (struct sli4_sge *)ctxp->ctxbuf->sglq->sgl;
switch (rsp->op) {
case NVMET_FCOP_READDATA:
case NVMET_FCOP_READDATA_RSP:
result = wcqe->parameter;
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
- atomic_inc(&tgtp->xmt_abort_cmpl);
+ if (ctxp->flag & LPFC_NVMET_ABORT_OP)
+ atomic_inc(&tgtp->xmt_fcp_abort_cmpl);
ctxp->state = LPFC_NVMET_STE_DONE;
}
ctxp->flag &= ~LPFC_NVMET_ABORT_OP;
spin_unlock_irqrestore(&ctxp->ctxlock, flags);
+ atomic_inc(&tgtp->xmt_abort_rsp);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_ABTS,
"6165 ABORT cmpl: xri x%x flg x%x (%d) "
wcqe->word0, wcqe->total_data_placed,
result, wcqe->word3);
+ cmdwqe->context2 = NULL;
+ cmdwqe->context3 = NULL;
/*
* if transport has released ctx, then can reuse it. Otherwise,
* will be recycled by transport release call.
*/
if (released)
- lpfc_nvmet_rq_post(phba, ctxp, &ctxp->rqb_buffer->hbuf);
+ lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
- cmdwqe->context2 = NULL;
- cmdwqe->context3 = NULL;
+ /* This is the iocbq for the abort, not the command */
lpfc_sli_release_iocbq(phba, cmdwqe);
/* Since iaab/iaar are NOT set, there is no work left.
result = wcqe->parameter;
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
- atomic_inc(&tgtp->xmt_abort_cmpl);
+ if (ctxp->flag & LPFC_NVMET_ABORT_OP)
+ atomic_inc(&tgtp->xmt_fcp_abort_cmpl);
if (!ctxp) {
/* if context is clear, related io alrady complete */
}
ctxp->flag &= ~LPFC_NVMET_ABORT_OP;
spin_unlock_irqrestore(&ctxp->ctxlock, flags);
+ atomic_inc(&tgtp->xmt_abort_rsp);
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6316 ABTS cmpl xri x%x flg x%x (%x) "
ctxp->oxid, ctxp->flag, released,
wcqe->word0, wcqe->total_data_placed,
result, wcqe->word3);
+
+ cmdwqe->context2 = NULL;
+ cmdwqe->context3 = NULL;
/*
* if transport has released ctx, then can reuse it. Otherwise,
* will be recycled by transport release call.
*/
if (released)
- lpfc_nvmet_rq_post(phba, ctxp, &ctxp->rqb_buffer->hbuf);
-
- cmdwqe->context2 = NULL;
- cmdwqe->context3 = NULL;
+ lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
/* Since iaab/iaar are NOT set, there is no work left.
* For LPFC_NVMET_XBUSY, lpfc_sli4_nvmet_xri_aborted
result = wcqe->parameter;
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
- atomic_inc(&tgtp->xmt_abort_cmpl);
+ atomic_inc(&tgtp->xmt_ls_abort_cmpl);
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6083 Abort cmpl: ctx %p WCQE: %08x %08x %08x %08x\n",
sid, xri, ctxp->wqeq->sli4_xritag);
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
- if (!ctxp->wqeq) {
- ctxp->wqeq = ctxp->rqb_buffer->iocbq;
- ctxp->wqeq->hba_wqidx = 0;
- }
ndlp = lpfc_findnode_did(phba->pport, sid);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
if (!ctxp->wqeq) {
- ctxp->wqeq = ctxp->rqb_buffer->iocbq;
+ ctxp->wqeq = ctxp->ctxbuf->iocbq;
ctxp->wqeq->hba_wqidx = 0;
}
/* Issue ABTS for this WQE based on iotag */
ctxp->abort_wqeq = lpfc_sli_get_iocbq(phba);
if (!ctxp->abort_wqeq) {
+ atomic_inc(&tgtp->xmt_abort_rsp_error);
lpfc_printf_log(phba, KERN_WARNING, LOG_NVME_ABTS,
"6161 ABORT failed: No wqeqs: "
"xri: x%x\n", ctxp->oxid);
/* driver queued commands are in process of being flushed */
if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) {
spin_unlock_irqrestore(&phba->hbalock, flags);
+ atomic_inc(&tgtp->xmt_abort_rsp_error);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
"6163 Driver in reset cleanup - flushing "
"NVME Req now. hba_flag x%x oxid x%x\n",
/* Outstanding abort is in progress */
if (abts_wqeq->iocb_flag & LPFC_DRIVER_ABORTED) {
spin_unlock_irqrestore(&phba->hbalock, flags);
+ atomic_inc(&tgtp->xmt_abort_rsp_error);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
"6164 Outstanding NVME I/O Abort Request "
"still pending on oxid x%x\n",
abts_wqeq->context2 = ctxp;
rc = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_wqeq);
spin_unlock_irqrestore(&phba->hbalock, flags);
- if (rc == WQE_SUCCESS)
+ if (rc == WQE_SUCCESS) {
+ atomic_inc(&tgtp->xmt_abort_sol);
return 0;
+ }
+ atomic_inc(&tgtp->xmt_abort_rsp_error);
ctxp->flag &= ~LPFC_NVMET_ABORT_OP;
lpfc_sli_release_iocbq(phba, abts_wqeq);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_ABTS,
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
if (!ctxp->wqeq) {
- ctxp->wqeq = ctxp->rqb_buffer->iocbq;
+ ctxp->wqeq = ctxp->ctxbuf->iocbq;
ctxp->wqeq->hba_wqidx = 0;
}
rc = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_wqeq);
spin_unlock_irqrestore(&phba->hbalock, flags);
if (rc == WQE_SUCCESS) {
- atomic_inc(&tgtp->xmt_abort_rsp);
return 0;
}
aerr:
+ atomic_inc(&tgtp->xmt_abort_rsp_error);
ctxp->flag &= ~LPFC_NVMET_ABORT_OP;
atomic_inc(&tgtp->xmt_abort_rsp_error);
lpfc_printf_log(phba, KERN_WARNING, LOG_NVME_ABTS,
}
abts_wqeq = ctxp->wqeq;
wqe_abts = &abts_wqeq->wqe;
+
lpfc_nvmet_unsol_issue_abort(phba, ctxp, sid, xri);
spin_lock_irqsave(&phba->hbalock, flags);
rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, abts_wqeq);
spin_unlock_irqrestore(&phba->hbalock, flags);
if (rc == WQE_SUCCESS) {
- atomic_inc(&tgtp->xmt_abort_rsp);
+ atomic_inc(&tgtp->xmt_abort_unsol);
return 0;
}
********************************************************************/
#define LPFC_NVMET_DEFAULT_SEGS (64 + 1) /* 256K IOs */
+#define LPFC_NVMET_RQE_DEF_COUNT 512
#define LPFC_NVMET_SUCCESS_LEN 12
/* Used for NVME Target */
atomic_t rcv_ls_req_out;
atomic_t rcv_ls_req_drop;
atomic_t xmt_ls_abort;
+ atomic_t xmt_ls_abort_cmpl;
/* Stats counters - lpfc_nvmet_xmt_ls_rsp */
atomic_t xmt_ls_rsp;
atomic_t rcv_fcp_cmd_in;
atomic_t rcv_fcp_cmd_out;
atomic_t rcv_fcp_cmd_drop;
+ atomic_t xmt_fcp_release;
/* Stats counters - lpfc_nvmet_xmt_fcp_op */
- atomic_t xmt_fcp_abort;
atomic_t xmt_fcp_drop;
atomic_t xmt_fcp_read_rsp;
atomic_t xmt_fcp_read;
atomic_t xmt_fcp_rsp_drop;
- /* Stats counters - lpfc_nvmet_unsol_issue_abort */
+ /* Stats counters - lpfc_nvmet_xmt_fcp_abort */
+ atomic_t xmt_fcp_abort;
+ atomic_t xmt_fcp_abort_cmpl;
+ atomic_t xmt_abort_sol;
+ atomic_t xmt_abort_unsol;
atomic_t xmt_abort_rsp;
atomic_t xmt_abort_rsp_error;
-
- /* Stats counters - lpfc_nvmet_xmt_abort_cmp */
- atomic_t xmt_abort_cmpl;
};
struct lpfc_nvmet_rcv_ctx {
#define LPFC_NVMET_CTX_RLS 0x8 /* ctx free requested */
#define LPFC_NVMET_ABTS_RCV 0x10 /* ABTS received on exchange */
struct rqb_dmabuf *rqb_buffer;
+ struct lpfc_nvmet_ctxbuf *ctxbuf;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint64_t ts_isr_cmd;
struct lpfc_iocbq *);
static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *,
struct hbq_dmabuf *);
+static void lpfc_sli4_handle_mds_loopback(struct lpfc_vport *vport,
+ struct hbq_dmabuf *dmabuf);
static int lpfc_sli4_fp_handle_cqe(struct lpfc_hba *, struct lpfc_queue *,
struct lpfc_cqe *);
static int lpfc_sli4_post_sgl_list(struct lpfc_hba *, struct list_head *,
if (unlikely(!hq) || unlikely(!dq))
return -ENOMEM;
put_index = hq->host_index;
- temp_hrqe = hq->qe[hq->host_index].rqe;
+ temp_hrqe = hq->qe[put_index].rqe;
temp_drqe = dq->qe[dq->host_index].rqe;
if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
return -EINVAL;
- if (hq->host_index != dq->host_index)
+ if (put_index != dq->host_index)
return -EINVAL;
/* If the host has not yet processed the next entry then we are done */
- if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+ if (((put_index + 1) % hq->entry_count) == hq->hba_index)
return -EBUSY;
lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
/* Update the host index to point to the next slot */
- hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+ hq->host_index = ((put_index + 1) % hq->entry_count);
dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+ hq->RQ_buf_posted++;
/* Ring The Header Receive Queue Doorbell */
if (!(hq->host_index % hq->entry_repost)) {
bf_set(lpfc_mbx_set_feature_mds,
&mbox->u.mqe.un.set_feature, 1);
bf_set(lpfc_mbx_set_feature_mds_deep_loopbk,
- &mbox->u.mqe.un.set_feature, 0);
+ &mbox->u.mqe.un.set_feature, 1);
mbox->u.mqe.un.set_feature.feature = LPFC_SET_MDS_DIAGS;
mbox->u.mqe.un.set_feature.param_len = 8;
break;
(phba->hba_flag & HBA_FCOE_MODE) ? "FCoE" : "FC");
}
+int
+lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq, int count, int idx)
+{
+ int rc, i;
+ struct lpfc_rqe hrqe;
+ struct lpfc_rqe drqe;
+ struct lpfc_rqb *rqbp;
+ struct rqb_dmabuf *rqb_buffer;
+ LIST_HEAD(rqb_buf_list);
+
+ rqbp = hrq->rqbp;
+ for (i = 0; i < count; i++) {
+ /* IF RQ is already full, don't bother */
+ if (rqbp->buffer_count + i >= rqbp->entry_count - 1)
+ break;
+ rqb_buffer = rqbp->rqb_alloc_buffer(phba);
+ if (!rqb_buffer)
+ break;
+ rqb_buffer->hrq = hrq;
+ rqb_buffer->drq = drq;
+ rqb_buffer->idx = idx;
+ list_add_tail(&rqb_buffer->hbuf.list, &rqb_buf_list);
+ }
+ while (!list_empty(&rqb_buf_list)) {
+ list_remove_head(&rqb_buf_list, rqb_buffer, struct rqb_dmabuf,
+ hbuf.list);
+
+ hrqe.address_lo = putPaddrLow(rqb_buffer->hbuf.phys);
+ hrqe.address_hi = putPaddrHigh(rqb_buffer->hbuf.phys);
+ drqe.address_lo = putPaddrLow(rqb_buffer->dbuf.phys);
+ drqe.address_hi = putPaddrHigh(rqb_buffer->dbuf.phys);
+ rc = lpfc_sli4_rq_put(hrq, drq, &hrqe, &drqe);
+ if (rc < 0) {
+ rqbp->rqb_free_buffer(phba, rqb_buffer);
+ } else {
+ list_add_tail(&rqb_buffer->hbuf.list,
+ &rqbp->rqb_buffer_list);
+ rqbp->buffer_count++;
+ }
+ }
+ return 1;
+}
+
/**
* lpfc_sli4_hba_setup - SLI4 device initialization PCI function
* @phba: Pointer to HBA context object.
int
lpfc_sli4_hba_setup(struct lpfc_hba *phba)
{
- int rc, i;
+ int rc, i, cnt;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mqe *mqe;
uint8_t *vpd;
goto out_destroy_queue;
}
phba->sli4_hba.nvmet_xri_cnt = rc;
+
+ cnt = phba->cfg_iocb_cnt * 1024;
+ /* We need 1 iocbq for every SGL, for IO processing */
+ cnt += phba->sli4_hba.nvmet_xri_cnt;
+ /* Initialize and populate the iocb list per host */
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2821 initialize iocb list %d total %d\n",
+ phba->cfg_iocb_cnt, cnt);
+ rc = lpfc_init_iocb_list(phba, cnt);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1413 Failed to init iocb list.\n");
+ goto out_destroy_queue;
+ }
+
lpfc_nvmet_create_targetport(phba);
} else {
/* update host scsi xri-sgl sizes and mappings */
"and mapping: %d\n", rc);
goto out_destroy_queue;
}
+
+ cnt = phba->cfg_iocb_cnt * 1024;
+ /* Initialize and populate the iocb list per host */
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2820 initialize iocb list %d total %d\n",
+ phba->cfg_iocb_cnt, cnt);
+ rc = lpfc_init_iocb_list(phba, cnt);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6301 Failed to init iocb list.\n");
+ goto out_destroy_queue;
+ }
}
if (phba->nvmet_support && phba->cfg_nvmet_mrq) {
-
/* Post initial buffers to all RQs created */
for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
rqbp = phba->sli4_hba.nvmet_mrq_hdr[i]->rqbp;
INIT_LIST_HEAD(&rqbp->rqb_buffer_list);
rqbp->rqb_alloc_buffer = lpfc_sli4_nvmet_alloc;
rqbp->rqb_free_buffer = lpfc_sli4_nvmet_free;
- rqbp->entry_count = 256;
+ rqbp->entry_count = LPFC_NVMET_RQE_DEF_COUNT;
rqbp->buffer_count = 0;
- /* Divide by 4 and round down to multiple of 16 */
- rc = (phba->cfg_nvmet_mrq_post >> 2) & 0xfff8;
- phba->sli4_hba.nvmet_mrq_hdr[i]->entry_repost = rc;
- phba->sli4_hba.nvmet_mrq_data[i]->entry_repost = rc;
-
lpfc_post_rq_buffer(
phba, phba->sli4_hba.nvmet_mrq_hdr[i],
phba->sli4_hba.nvmet_mrq_data[i],
- phba->cfg_nvmet_mrq_post);
+ LPFC_NVMET_RQE_DEF_COUNT, i);
}
}
/* Unset all the queues set up in this routine when error out */
lpfc_sli4_queue_unset(phba);
out_destroy_queue:
+ lpfc_free_iocb_list(phba);
lpfc_sli4_queue_destroy(phba);
out_stop_timers:
lpfc_stop_hba_timers(phba);
memset(wqe, 0, sizeof(union lpfc_wqe128));
/* Some of the fields are in the right position already */
memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
- wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */
- wqe->generic.wqe_com.word10 = 0;
+ if (iocbq->iocb.ulpCommand != CMD_SEND_FRAME) {
+ /* The ct field has moved so reset */
+ wqe->generic.wqe_com.word7 = 0;
+ wqe->generic.wqe_com.word10 = 0;
+ }
abort_tag = (uint32_t) iocbq->iotag;
xritag = iocbq->sli4_xritag;
}
break;
+ case CMD_SEND_FRAME:
+ bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag);
+ bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag);
+ return 0;
case CMD_XRI_ABORTED_CX:
case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
struct fc_frame_header *fc_hdr;
struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+ struct lpfc_nvmet_tgtport *tgtp;
struct hbq_dmabuf *dma_buf;
uint32_t status, rq_id;
unsigned long iflags;
case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2537 Receive Frame Truncated!!\n");
- hrq->RQ_buf_trunc++;
case FC_STATUS_RQ_SUCCESS:
lpfc_sli4_rq_release(hrq, drq);
spin_lock_irqsave(&phba->hbalock, iflags);
goto out;
}
hrq->RQ_rcv_buf++;
+ hrq->RQ_buf_posted--;
memcpy(&dma_buf->cq_event.cqe.rcqe_cmpl, rcqe, sizeof(*rcqe));
/* If a NVME LS event (type 0x28), treat it as Fast path */
spin_unlock_irqrestore(&phba->hbalock, iflags);
workposted = true;
break;
- case FC_STATUS_INSUFF_BUF_NEED_BUF:
case FC_STATUS_INSUFF_BUF_FRM_DISC:
+ if (phba->nvmet_support) {
+ tgtp = phba->targetport->private;
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_NVME,
+ "6402 RQE Error x%x, posted %d err_cnt "
+ "%d: %x %x %x\n",
+ status, hrq->RQ_buf_posted,
+ hrq->RQ_no_posted_buf,
+ atomic_read(&tgtp->rcv_fcp_cmd_in),
+ atomic_read(&tgtp->rcv_fcp_cmd_out),
+ atomic_read(&tgtp->xmt_fcp_release));
+ }
+ /* fallthrough */
+
+ case FC_STATUS_INSUFF_BUF_NEED_BUF:
hrq->RQ_no_posted_buf++;
/* Post more buffers if possible */
spin_lock_irqsave(&phba->hbalock, iflags);
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
if (!(++ecount % cq->entry_repost))
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ break;
cq->CQ_mbox++;
}
break;
workposted |= lpfc_sli4_sp_handle_cqe(phba, cq,
cqe);
if (!(++ecount % cq->entry_repost))
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ break;
}
/* Track the max number of CQEs processed in 1 EQ */
struct lpfc_queue *drq;
struct rqb_dmabuf *dma_buf;
struct fc_frame_header *fc_hdr;
+ struct lpfc_nvmet_tgtport *tgtp;
uint32_t status, rq_id;
unsigned long iflags;
uint32_t fctl, idx;
case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"6126 Receive Frame Truncated!!\n");
- hrq->RQ_buf_trunc++;
- break;
case FC_STATUS_RQ_SUCCESS:
lpfc_sli4_rq_release(hrq, drq);
spin_lock_irqsave(&phba->hbalock, iflags);
}
spin_unlock_irqrestore(&phba->hbalock, iflags);
hrq->RQ_rcv_buf++;
+ hrq->RQ_buf_posted--;
fc_hdr = (struct fc_frame_header *)dma_buf->hbuf.virt;
/* Just some basic sanity checks on FCP Command frame */
drop:
lpfc_in_buf_free(phba, &dma_buf->dbuf);
break;
- case FC_STATUS_INSUFF_BUF_NEED_BUF:
case FC_STATUS_INSUFF_BUF_FRM_DISC:
+ if (phba->nvmet_support) {
+ tgtp = phba->targetport->private;
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_NVME,
+ "6401 RQE Error x%x, posted %d err_cnt "
+ "%d: %x %x %x\n",
+ status, hrq->RQ_buf_posted,
+ hrq->RQ_no_posted_buf,
+ atomic_read(&tgtp->rcv_fcp_cmd_in),
+ atomic_read(&tgtp->rcv_fcp_cmd_out),
+ atomic_read(&tgtp->xmt_fcp_release));
+ }
+ /* fallthrough */
+
+ case FC_STATUS_INSUFF_BUF_NEED_BUF:
hrq->RQ_no_posted_buf++;
/* Post more buffers if possible */
- spin_lock_irqsave(&phba->hbalock, iflags);
- phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
- spin_unlock_irqrestore(&phba->hbalock, iflags);
- workposted = true;
break;
}
out:
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_fp_handle_cqe(phba, cq, cqe);
if (!(++ecount % cq->entry_repost))
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ break;
}
/* Track the max number of CQEs processed in 1 EQ */
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_fp_handle_cqe(phba, cq, cqe);
if (!(++ecount % cq->entry_repost))
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ break;
}
/* Track the max number of CQEs processed in 1 EQ */
while ((eqe = lpfc_sli4_eq_get(eq))) {
lpfc_sli4_fof_handle_eqe(phba, eqe);
if (!(++ecount % eq->entry_repost))
- lpfc_sli4_eq_release(eq, LPFC_QUEUE_NOARM);
+ break;
eq->EQ_processed++;
}
lpfc_sli4_hba_handle_eqe(phba, eqe, hba_eqidx);
if (!(++ecount % fpeq->entry_repost))
- lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+ break;
fpeq->EQ_processed++;
}
}
queue->entry_size = entry_size;
queue->entry_count = entry_count;
-
- /*
- * entry_repost is calculated based on the number of entries in the
- * queue. This works out except for RQs. If buffers are NOT initially
- * posted for every RQE, entry_repost should be adjusted accordingly.
- */
- queue->entry_repost = (entry_count >> 3);
- if (queue->entry_repost < LPFC_QUEUE_MIN_REPOST)
- queue->entry_repost = LPFC_QUEUE_MIN_REPOST;
queue->phba = phba;
+ /* entry_repost will be set during q creation */
+
return queue;
out_fail:
lpfc_sli4_queue_free(queue);
status = -ENXIO;
eq->host_index = 0;
eq->hba_index = 0;
+ eq->entry_repost = LPFC_EQ_REPOST;
mempool_free(mbox, phba->mbox_mem_pool);
return status;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0361 Unsupported CQ count: "
- "entry cnt %d sz %d pg cnt %d repost %d\n",
+ "entry cnt %d sz %d pg cnt %d\n",
cq->entry_count, cq->entry_size,
- cq->page_count, cq->entry_repost);
+ cq->page_count);
if (cq->entry_count < 256) {
status = -EINVAL;
goto out;
cq->assoc_qid = eq->queue_id;
cq->host_index = 0;
cq->hba_index = 0;
+ cq->entry_repost = LPFC_CQ_REPOST;
out:
mempool_free(mbox, phba->mbox_mem_pool);
cq->assoc_qid = eq->queue_id;
cq->host_index = 0;
cq->hba_index = 0;
+ cq->entry_repost = LPFC_CQ_REPOST;
rc = 0;
list_for_each_entry(dmabuf, &cq->page_list, list) {
mq->subtype = subtype;
mq->host_index = 0;
mq->hba_index = 0;
+ mq->entry_repost = LPFC_MQ_REPOST;
/* link the mq onto the parent cq child list */
list_add_tail(&mq->list, &cq->child_list);
return status;
}
-/**
- * lpfc_rq_adjust_repost - Adjust entry_repost for an RQ
- * @phba: HBA structure that indicates port to create a queue on.
- * @rq: The queue structure to use for the receive queue.
- * @qno: The associated HBQ number
- *
- *
- * For SLI4 we need to adjust the RQ repost value based on
- * the number of buffers that are initially posted to the RQ.
- */
-void
-lpfc_rq_adjust_repost(struct lpfc_hba *phba, struct lpfc_queue *rq, int qno)
-{
- uint32_t cnt;
-
- /* sanity check on queue memory */
- if (!rq)
- return;
- cnt = lpfc_hbq_defs[qno]->entry_count;
-
- /* Recalc repost for RQs based on buffers initially posted */
- cnt = (cnt >> 3);
- if (cnt < LPFC_QUEUE_MIN_REPOST)
- cnt = LPFC_QUEUE_MIN_REPOST;
-
- rq->entry_repost = cnt;
-}
-
/**
* lpfc_rq_create - Create a Receive Queue on the HBA
* @phba: HBA structure that indicates port to create a queue on.
hrq->subtype = subtype;
hrq->host_index = 0;
hrq->hba_index = 0;
+ hrq->entry_repost = LPFC_RQ_REPOST;
/* now create the data queue */
lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
bf_set(lpfc_rq_context_rqe_count_1,
&rq_create->u.request.context, hrq->entry_count);
- rq_create->u.request.context.buffer_size = LPFC_DATA_BUF_SIZE;
+ if (subtype == LPFC_NVMET)
+ rq_create->u.request.context.buffer_size =
+ LPFC_NVMET_DATA_BUF_SIZE;
+ else
+ rq_create->u.request.context.buffer_size =
+ LPFC_DATA_BUF_SIZE;
bf_set(lpfc_rq_context_rqe_size, &rq_create->u.request.context,
LPFC_RQE_SIZE_8);
bf_set(lpfc_rq_context_page_size, &rq_create->u.request.context,
LPFC_RQ_RING_SIZE_4096);
break;
}
- bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
- LPFC_DATA_BUF_SIZE);
+ if (subtype == LPFC_NVMET)
+ bf_set(lpfc_rq_context_buf_size,
+ &rq_create->u.request.context,
+ LPFC_NVMET_DATA_BUF_SIZE);
+ else
+ bf_set(lpfc_rq_context_buf_size,
+ &rq_create->u.request.context,
+ LPFC_DATA_BUF_SIZE);
}
bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
cq->queue_id);
drq->subtype = subtype;
drq->host_index = 0;
drq->hba_index = 0;
+ drq->entry_repost = LPFC_RQ_REPOST;
/* link the header and data RQs onto the parent cq child list */
list_add_tail(&hrq->list, &cq->child_list);
cq->queue_id);
bf_set(lpfc_rq_context_data_size,
&rq_create->u.request.context,
- LPFC_DATA_BUF_SIZE);
+ LPFC_NVMET_DATA_BUF_SIZE);
bf_set(lpfc_rq_context_hdr_size,
&rq_create->u.request.context,
LPFC_HDR_BUF_SIZE);
hrq->subtype = subtype;
hrq->host_index = 0;
hrq->hba_index = 0;
+ hrq->entry_repost = LPFC_RQ_REPOST;
drq->db_format = LPFC_DB_RING_FORMAT;
drq->db_regaddr = phba->sli4_hba.RQDBregaddr;
drq->subtype = subtype;
drq->host_index = 0;
drq->hba_index = 0;
+ drq->entry_repost = LPFC_RQ_REPOST;
list_add_tail(&hrq->list, &cq->child_list);
list_add_tail(&drq->list, &cq->child_list);
struct fc_vft_header *fc_vft_hdr;
uint32_t *header = (uint32_t *) fc_hdr;
+#define FC_RCTL_MDS_DIAGS 0xF4
+
switch (fc_hdr->fh_r_ctl) {
case FC_RCTL_DD_UNCAT: /* uncategorized information */
case FC_RCTL_DD_SOL_DATA: /* solicited data */
case FC_RCTL_F_BSY: /* fabric busy to data frame */
case FC_RCTL_F_BSYL: /* fabric busy to link control frame */
case FC_RCTL_LCR: /* link credit reset */
+ case FC_RCTL_MDS_DIAGS: /* MDS Diagnostics */
case FC_RCTL_END: /* end */
break;
case FC_RCTL_VFTH: /* Virtual Fabric tagging Header */
default:
goto drop;
}
+
+#define FC_TYPE_VENDOR_UNIQUE 0xFF
+
switch (fc_hdr->fh_type) {
case FC_TYPE_BLS:
case FC_TYPE_ELS:
case FC_TYPE_FCP:
case FC_TYPE_CT:
case FC_TYPE_NVME:
+ case FC_TYPE_VENDOR_UNIQUE:
break;
case FC_TYPE_IP:
case FC_TYPE_ILS:
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"2538 Received frame rctl:%s (x%x), type:%s (x%x), "
"frame Data:%08x %08x %08x %08x %08x %08x %08x\n",
+ (fc_hdr->fh_r_ctl == FC_RCTL_MDS_DIAGS) ? "MDS Diags" :
lpfc_rctl_names[fc_hdr->fh_r_ctl], fc_hdr->fh_r_ctl,
- lpfc_type_names[fc_hdr->fh_type], fc_hdr->fh_type,
- be32_to_cpu(header[0]), be32_to_cpu(header[1]),
- be32_to_cpu(header[2]), be32_to_cpu(header[3]),
- be32_to_cpu(header[4]), be32_to_cpu(header[5]),
- be32_to_cpu(header[6]));
+ (fc_hdr->fh_type == FC_TYPE_VENDOR_UNIQUE) ?
+ "Vendor Unique" : lpfc_type_names[fc_hdr->fh_type],
+ fc_hdr->fh_type, be32_to_cpu(header[0]),
+ be32_to_cpu(header[1]), be32_to_cpu(header[2]),
+ be32_to_cpu(header[3]), be32_to_cpu(header[4]),
+ be32_to_cpu(header[5]), be32_to_cpu(header[6]));
return 0;
drop:
lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
lpfc_sli_release_iocbq(phba, iocbq);
}
+static void
+lpfc_sli4_mds_loopback_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+ struct lpfc_iocbq *rspiocb)
+{
+ struct lpfc_dmabuf *pcmd = cmdiocb->context2;
+
+ if (pcmd && pcmd->virt)
+ pci_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+ kfree(pcmd);
+ lpfc_sli_release_iocbq(phba, cmdiocb);
+}
+
+static void
+lpfc_sli4_handle_mds_loopback(struct lpfc_vport *vport,
+ struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *fc_hdr;
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_iocbq *iocbq = NULL;
+ union lpfc_wqe *wqe;
+ struct lpfc_dmabuf *pcmd = NULL;
+ uint32_t frame_len;
+ int rc;
+
+ fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ frame_len = bf_get(lpfc_rcqe_length, &dmabuf->cq_event.cqe.rcqe_cmpl);
+
+ /* Send the received frame back */
+ iocbq = lpfc_sli_get_iocbq(phba);
+ if (!iocbq)
+ goto exit;
+
+ /* Allocate buffer for command payload */
+ pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (pcmd)
+ pcmd->virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ &pcmd->phys);
+ if (!pcmd || !pcmd->virt)
+ goto exit;
+
+ INIT_LIST_HEAD(&pcmd->list);
+
+ /* copyin the payload */
+ memcpy(pcmd->virt, dmabuf->dbuf.virt, frame_len);
+
+ /* fill in BDE's for command */
+ iocbq->iocb.un.xseq64.bdl.addrHigh = putPaddrHigh(pcmd->phys);
+ iocbq->iocb.un.xseq64.bdl.addrLow = putPaddrLow(pcmd->phys);
+ iocbq->iocb.un.xseq64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ iocbq->iocb.un.xseq64.bdl.bdeSize = frame_len;
+
+ iocbq->context2 = pcmd;
+ iocbq->vport = vport;
+ iocbq->iocb_flag &= ~LPFC_FIP_ELS_ID_MASK;
+ iocbq->iocb_flag |= LPFC_USE_FCPWQIDX;
+
+ /*
+ * Setup rest of the iocb as though it were a WQE
+ * Build the SEND_FRAME WQE
+ */
+ wqe = (union lpfc_wqe *)&iocbq->iocb;
+
+ wqe->send_frame.frame_len = frame_len;
+ wqe->send_frame.fc_hdr_wd0 = be32_to_cpu(*((uint32_t *)fc_hdr));
+ wqe->send_frame.fc_hdr_wd1 = be32_to_cpu(*((uint32_t *)fc_hdr + 1));
+ wqe->send_frame.fc_hdr_wd2 = be32_to_cpu(*((uint32_t *)fc_hdr + 2));
+ wqe->send_frame.fc_hdr_wd3 = be32_to_cpu(*((uint32_t *)fc_hdr + 3));
+ wqe->send_frame.fc_hdr_wd4 = be32_to_cpu(*((uint32_t *)fc_hdr + 4));
+ wqe->send_frame.fc_hdr_wd5 = be32_to_cpu(*((uint32_t *)fc_hdr + 5));
+
+ iocbq->iocb.ulpCommand = CMD_SEND_FRAME;
+ iocbq->iocb.ulpLe = 1;
+ iocbq->iocb_cmpl = lpfc_sli4_mds_loopback_cmpl;
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocbq, 0);
+ if (rc == IOCB_ERROR)
+ goto exit;
+
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ return;
+
+exit:
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2023 Unable to process MDS loopback frame\n");
+ if (pcmd && pcmd->virt)
+ pci_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+ kfree(pcmd);
+ lpfc_sli_release_iocbq(phba, iocbq);
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+}
+
/**
* lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
* @phba: Pointer to HBA context object.
fcfi = bf_get(lpfc_rcqe_fcf_id,
&dmabuf->cq_event.cqe.rcqe_cmpl);
+ if (fc_hdr->fh_r_ctl == 0xF4 && fc_hdr->fh_type == 0xFF) {
+ vport = phba->pport;
+ /* Handle MDS Loopback frames */
+ lpfc_sli4_handle_mds_loopback(vport, dmabuf);
+ return;
+ }
+
/* d_id this frame is directed to */
did = sli4_did_from_fc_hdr(fc_hdr);
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
+ } else {
+ /*
+ * The next_rpi stores the next logical module-64 rpi value used
+ * to post physical rpis in subsequent rpi postings.
+ */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli4_hba.next_rpi = rpi_page->next_rpi;
+ spin_unlock_irq(&phba->hbalock);
}
return rc;
}
spin_lock_irqsave(&pring->ring_lock, iflags);
ctxp = pwqe->context2;
- sglq = ctxp->rqb_buffer->sglq;
+ sglq = ctxp->ctxbuf->sglq;
if (pwqe->sli4_xritag == NO_XRI) {
pwqe->sli4_lxritag = sglq->sli4_lxritag;
pwqe->sli4_xritag = sglq->sli4_xritag;
#define LPFC_XRI_EXCH_BUSY_WAIT_TMO 10000
#define LPFC_XRI_EXCH_BUSY_WAIT_T1 10
#define LPFC_XRI_EXCH_BUSY_WAIT_T2 30000
-#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
#define LPFC_RPI_LOW_WATER_MARK 10
#define LPFC_UNREG_FCF 1
uint32_t entry_count; /* Number of entries to support on the queue */
uint32_t entry_size; /* Size of each queue entry. */
uint32_t entry_repost; /* Count of entries before doorbell is rung */
-#define LPFC_QUEUE_MIN_REPOST 8
+#define LPFC_EQ_REPOST 8
+#define LPFC_MQ_REPOST 8
+#define LPFC_CQ_REPOST 64
+#define LPFC_RQ_REPOST 64
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32 /* For WQs */
uint32_t queue_id; /* Queue ID assigned by the hardware */
uint32_t assoc_qid; /* Queue ID associated with, for CQ/WQ/MQ */
uint32_t page_count; /* Number of pages allocated for this queue */
/* defines for RQ stats */
#define RQ_no_posted_buf q_cnt_1
#define RQ_no_buf_found q_cnt_2
-#define RQ_buf_trunc q_cnt_3
+#define RQ_buf_posted q_cnt_3
#define RQ_rcv_buf q_cnt_4
uint64_t isr_timestamp;
uint16_t scsi_xri_start;
uint16_t els_xri_cnt;
uint16_t nvmet_xri_cnt;
+ uint16_t nvmet_ctx_cnt;
+ uint16_t nvmet_io_wait_cnt;
+ uint16_t nvmet_io_wait_total;
struct list_head lpfc_els_sgl_list;
struct list_head lpfc_abts_els_sgl_list;
struct list_head lpfc_nvmet_sgl_list;
struct list_head lpfc_abts_nvmet_ctx_list;
struct list_head lpfc_abts_scsi_buf_list;
struct list_head lpfc_abts_nvme_buf_list;
+ struct list_head lpfc_nvmet_ctx_list;
+ struct list_head lpfc_nvmet_io_wait_list;
struct lpfc_sglq **lpfc_sglq_active_list;
struct list_head lpfc_rpi_hdr_list;
unsigned long *rpi_bmask;
spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
spinlock_t sgl_list_lock; /* list of aborted els IOs */
spinlock_t nvmet_io_lock;
+ spinlock_t nvmet_io_wait_lock; /* IOs waiting for ctx resources */
uint32_t physical_port;
/* CPU to vector mapping information */
uint16_t num_online_cpu;
uint16_t num_present_cpu;
uint16_t curr_disp_cpu;
-
- uint16_t nvmet_mrq_post_idx;
};
enum lpfc_sge_type {
struct lpfc_dmabuf *dmabuf;
uint32_t page_count;
uint32_t start_rpi;
+ uint16_t next_rpi;
};
struct lpfc_rsrc_blks {
int lpfc_mrq_create(struct lpfc_hba *phba, struct lpfc_queue **hrqp,
struct lpfc_queue **drqp, struct lpfc_queue **cqp,
uint32_t subtype);
-void lpfc_rq_adjust_repost(struct lpfc_hba *, struct lpfc_queue *, int);
int lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
int lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
int lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.2.0.12"
+#define LPFC_DRIVER_VERSION "11.2.0.14"
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
/* zero out the cmd, except for the embedded scsi_request */
memset((char *)cmd + sizeof(cmd->req), 0,
- sizeof(*cmd) - sizeof(cmd->req));
+ sizeof(*cmd) - sizeof(cmd->req) + shost->hostt->cmd_size);
req->special = cmd;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
+ int ret;
if (!(rq->cmd_flags & REQ_NOUNMAP)) {
switch (sdkp->zeroing_mode) {
case SD_ZERO_WS16_UNMAP:
- return sd_setup_write_same16_cmnd(cmd, true);
+ ret = sd_setup_write_same16_cmnd(cmd, true);
+ goto out;
case SD_ZERO_WS10_UNMAP:
- return sd_setup_write_same10_cmnd(cmd, true);
+ ret = sd_setup_write_same10_cmnd(cmd, true);
+ goto out;
}
}
if (sdp->no_write_same)
return BLKPREP_INVALID;
+
if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff)
- return sd_setup_write_same16_cmnd(cmd, false);
- return sd_setup_write_same10_cmnd(cmd, false);
+ ret = sd_setup_write_same16_cmnd(cmd, false);
+ else
+ ret = sd_setup_write_same10_cmnd(cmd, false);
+
+out:
+ if (sd_is_zoned(sdkp) && ret == BLKPREP_OK)
+ return sd_zbc_write_lock_zone(cmd);
+
+ return ret;
}
static void sd_config_write_same(struct scsi_disk *sdkp)
rq->__data_len = sdp->sector_size;
ret = scsi_init_io(cmd);
rq->__data_len = nr_bytes;
+
+ if (sd_is_zoned(sdkp) && ret != BLKPREP_OK)
+ sd_zbc_write_unlock_zone(cmd);
+
return ret;
}
return retval;
}
-static int sd_sync_cache(struct scsi_disk *sdkp)
+static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
{
int retries, res;
struct scsi_device *sdp = sdkp->device;
const int timeout = sdp->request_queue->rq_timeout
* SD_FLUSH_TIMEOUT_MULTIPLIER;
- struct scsi_sense_hdr sshdr;
+ struct scsi_sense_hdr my_sshdr;
if (!scsi_device_online(sdp))
return -ENODEV;
+ /* caller might not be interested in sense, but we need it */
+ if (!sshdr)
+ sshdr = &my_sshdr;
+
for (retries = 3; retries > 0; --retries) {
unsigned char cmd[10] = { 0 };
* Leave the rest of the command zero to indicate
* flush everything.
*/
- res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
+ res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr,
timeout, SD_MAX_RETRIES, 0, RQF_PM, NULL);
if (res == 0)
break;
sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
if (driver_byte(res) & DRIVER_SENSE)
- sd_print_sense_hdr(sdkp, &sshdr);
+ sd_print_sense_hdr(sdkp, sshdr);
+
/* we need to evaluate the error return */
- if (scsi_sense_valid(&sshdr) &&
- (sshdr.asc == 0x3a || /* medium not present */
- sshdr.asc == 0x20)) /* invalid command */
+ if (scsi_sense_valid(sshdr) &&
+ (sshdr->asc == 0x3a || /* medium not present */
+ sshdr->asc == 0x20)) /* invalid command */
/* this is no error here */
return 0;
if (sdkp->WCE && sdkp->media_present) {
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
- sd_sync_cache(sdkp);
+ sd_sync_cache(sdkp, NULL);
}
if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ struct scsi_sense_hdr sshdr;
int ret = 0;
if (!sdkp) /* E.g.: runtime suspend following sd_remove() */
if (sdkp->WCE && sdkp->media_present) {
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
- ret = sd_sync_cache(sdkp);
+ ret = sd_sync_cache(sdkp, &sshdr);
+
if (ret) {
/* ignore OFFLINE device */
if (ret == -ENODEV)
- ret = 0;
- goto done;
+ return 0;
+
+ if (!scsi_sense_valid(&sshdr) ||
+ sshdr.sense_key != ILLEGAL_REQUEST)
+ return ret;
+
+ /*
+ * sshdr.sense_key == ILLEGAL_REQUEST means this drive
+ * doesn't support sync. There's not much to do and
+ * suspend shouldn't fail.
+ */
+ ret = 0;
}
}
ret = 0;
}
-done:
return ret;
}
if ((1 == resp->done) && (!resp->sg_io_owned) &&
((-1 == pack_id) || (resp->header.pack_id == pack_id))) {
resp->done = 2; /* guard against other readers */
- break;
+ write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+ return resp;
}
}
write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
- return resp;
+ return NULL;
}
/* always adds to end of list */
ufshcd_add_spm_lvl_sysfs_nodes(hba);
}
+static inline void ufshcd_remove_sysfs_nodes(struct ufs_hba *hba)
+{
+ device_remove_file(hba->dev, &hba->rpm_lvl_attr);
+ device_remove_file(hba->dev, &hba->spm_lvl_attr);
+}
+
/**
* ufshcd_shutdown - shutdown routine
* @hba: per adapter instance
*/
void ufshcd_remove(struct ufs_hba *hba)
{
+ ufshcd_remove_sysfs_nodes(hba);
scsi_remove_host(hba->host);
/* disable interrupts */
ufshcd_disable_intr(hba, hba->intr_mask);
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default y if ARCH_BCM_IPROC
help
- Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
- BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
- with a thermal sensor that allows checking CPU temperature. This
- driver provides support for it.
+ Support for the Northstar and Northstar Plus family of SoCs (e.g.
+ BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+ Management Unit) block with a thermal sensor that allows checking CPU
+ temperature.
static int qoriq_tmu_probe(struct platform_device *pdev)
{
int ret;
- const struct thermal_trip *trip;
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
u32 site = 0;
goto err_tmu;
}
- trip = of_thermal_get_trip_points(data->tz);
-
/* Enable monitoring */
site |= 0x1 << (15 - data->sensor_id);
tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
* This may be called from any critical situation to trigger a system shutdown
* after a known period of time. By default this is not scheduled.
*/
-void thermal_emergency_poweroff(void)
+static void thermal_emergency_poweroff(void)
{
int poweroff_delay_ms = CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS;
/*
}
/**
- * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
* @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
}
bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
- if (!bgp) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ if (!bgp)
return ERR_PTR(-ENOMEM);
- }
of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
bgp->conf = of_id->data;
/* register shadow for context save and restore */
- bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
- bgp->conf->sensor_count, GFP_KERNEL);
- if (!bgp->regval) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
+ sizeof(*bgp->regval), GFP_KERNEL);
+ if (!bgp->regval)
return ERR_PTR(-ENOMEM);
- }
i = 0;
do {
ehv_bc_driver = alloc_tty_driver(count);
if (!ehv_bc_driver) {
ret = -ENOMEM;
- goto error;
+ goto err_free_bcs;
}
ehv_bc_driver->driver_name = "ehv-bc";
ret = tty_register_driver(ehv_bc_driver);
if (ret) {
pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret);
- goto error;
+ goto err_put_tty_driver;
}
ret = platform_driver_register(&ehv_bc_tty_driver);
if (ret) {
pr_err("ehv-bc: could not register platform driver (ret=%i)\n",
ret);
- goto error;
+ goto err_deregister_tty_driver;
}
return 0;
-error:
- if (ehv_bc_driver) {
- tty_unregister_driver(ehv_bc_driver);
- put_tty_driver(ehv_bc_driver);
- }
-
+err_deregister_tty_driver:
+ tty_unregister_driver(ehv_bc_driver);
+err_put_tty_driver:
+ put_tty_driver(ehv_bc_driver);
+err_free_bcs:
kfree(bcs);
return ret;
}
EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
+int serdev_device_write_buf(struct serdev_device *serdev,
+ const unsigned char *buf, size_t count)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+
+ if (!ctrl || !ctrl->ops->write_buf)
+ return -EINVAL;
+
+ return ctrl->ops->write_buf(ctrl, buf, count);
+}
+EXPORT_SYMBOL_GPL(serdev_device_write_buf);
+
int serdev_device_write(struct serdev_device *serdev,
const unsigned char *buf, size_t count,
unsigned long timeout)
return PTR_ERR(tty);
serport->tty = tty;
- serport->port->client_ops = &client_ops;
- serport->port->client_data = ctrl;
-
if (tty->ops->open)
tty->ops->open(serport->tty, NULL);
else
struct device *parent,
struct tty_driver *drv, int idx)
{
+ const struct tty_port_client_operations *old_ops;
struct serdev_controller *ctrl;
struct serport *serport;
int ret;
ctrl->ops = &ctrl_ops;
+ old_ops = port->client_ops;
+ port->client_ops = &client_ops;
+ port->client_data = ctrl;
+
ret = serdev_controller_add(ctrl);
if (ret)
- goto err_controller_put;
+ goto err_reset_data;
dev_info(&ctrl->dev, "tty port %s%d registered\n", drv->name, idx);
return &ctrl->dev;
-err_controller_put:
+err_reset_data:
+ port->client_data = NULL;
+ port->client_ops = old_ops;
serdev_controller_put(ctrl);
+
return ERR_PTR(ret);
}
-void serdev_tty_port_unregister(struct tty_port *port)
+int serdev_tty_port_unregister(struct tty_port *port)
{
struct serdev_controller *ctrl = port->client_data;
struct serport *serport = serdev_controller_get_drvdata(ctrl);
if (!serport)
- return;
+ return -ENODEV;
serdev_controller_remove(ctrl);
port->client_ops = NULL;
port->client_data = NULL;
serdev_controller_put(ctrl);
+
+ return 0;
}
/*
* These are definitions for the Exar XR17V35X and XR17(C|D)15X
*/
+#define UART_EXAR_INT0 0x80
#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
#define UART_EXAR_DVID 0x8d /* Device identification */
/*
* Check if the device is a Fintek F81216A
*/
- if (port->type == PORT_16550A)
+ if (port->type == PORT_16550A && port->iotype == UPIO_PORT)
fintek_8250_probe(up);
if (up->capabilities != old_capabilities) {
static int exar_handle_irq(struct uart_port *port)
{
unsigned int iir = serial_port_in(port, UART_IIR);
- int ret;
+ int ret = 0;
- ret = serial8250_handle_irq(port, iir);
+ if (((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) &&
+ serial_port_in(port, UART_EXAR_INT0) != 0)
+ ret = 1;
- if ((port->type == PORT_XR17V35X) ||
- (port->type == PORT_XR17D15X)) {
- serial_port_in(port, 0x80);
- serial_port_in(port, 0x81);
- serial_port_in(port, 0x82);
- serial_port_in(port, 0x83);
- }
+ ret |= serial8250_handle_irq(port, iir);
return ret;
}
serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
+ if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X))
+ serial_port_in(port, UART_EXAR_INT0);
/*
* At this point, there's no way the LSR could still be 0xff;
serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
+ if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X))
+ serial_port_in(port, UART_EXAR_INT0);
up->lsr_saved_flags = 0;
up->msr_saved_flags = 0;
port = &altera_jtaguart_ports[i].port;
uart_remove_one_port(&altera_jtaguart_driver, port);
+ iounmap(port->membase);
return 0;
}
if (port) {
uart_remove_one_port(&altera_uart_driver, port);
port->mapbase = 0;
+ iounmap(port->membase);
}
return 0;
#define UARTn_FRAME 0x04
#define UARTn_FRAME_DATABITS__MASK 0x000f
#define UARTn_FRAME_DATABITS(n) ((n) - 3)
+#define UARTn_FRAME_PARITY__MASK 0x0300
#define UARTn_FRAME_PARITY_NONE 0x0000
#define UARTn_FRAME_PARITY_EVEN 0x0200
#define UARTn_FRAME_PARITY_ODD 0x0300
16 * (4 + (clkdiv >> 6)));
frame = efm32_uart_read32(efm_port, UARTn_FRAME);
- if (frame & UARTn_FRAME_PARITY_ODD)
+ switch (frame & UARTn_FRAME_PARITY__MASK) {
+ case UARTn_FRAME_PARITY_ODD:
*parity = 'o';
- else if (frame & UARTn_FRAME_PARITY_EVEN)
+ break;
+ case UARTn_FRAME_PARITY_EVEN:
*parity = 'e';
- else
+ break;
+ default:
*parity = 'n';
+ }
*bits = (frame & UARTn_FRAME_DATABITS__MASK) -
UARTn_FRAME_DATABITS(4) + 4;
static void __exit ifx_spi_exit(void)
{
/* unregister */
+ spi_unregister_driver(&ifx_spi_driver);
tty_unregister_driver(tty_drv);
put_tty_driver(tty_drv);
- spi_unregister_driver(&ifx_spi_driver);
unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
}
* and DCD (when they are outputs) or enables the respective
* irqs. So set this bit early, i.e. before requesting irqs.
*/
- writel(UFCR_DCEDTE, sport->port.membase + UFCR);
+ reg = readl(sport->port.membase + UFCR);
+ if (!(reg & UFCR_DCEDTE))
+ writel(reg | UFCR_DCEDTE, sport->port.membase + UFCR);
/*
* Disable UCR3_RI and UCR3_DCD irqs. They are also not
sport->port.membase + UCR3);
} else {
- writel(0, sport->port.membase + UFCR);
+ unsigned long ucr3 = UCR3_DSR;
+
+ reg = readl(sport->port.membase + UFCR);
+ if (reg & UFCR_DCEDTE)
+ writel(reg & ~UFCR_DCEDTE, sport->port.membase + UFCR);
+
+ if (!is_imx1_uart(sport))
+ ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
+ writel(ucr3, sport->port.membase + UCR3);
}
clk_disable_unprepare(sport->clk_ipg);
mutex_lock(&port->mutex);
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
- if (device_may_wakeup(tty_dev)) {
+ if (tty_dev && device_may_wakeup(tty_dev)) {
if (!enable_irq_wake(uport->irq))
uport->irq_wake = 1;
put_device(tty_dev);
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this port's parameters.
*/
- tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+ tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
uport->line, uport->dev, port, uport->tty_groups);
if (likely(!IS_ERR(tty_dev))) {
device_set_wakeup_capable(tty_dev, 1);
/*
* Remove the devices from the tty layer
*/
- tty_unregister_device(drv->tty_driver, uport->line);
+ tty_port_unregister_device(port, drv->tty_driver, uport->line);
tty = tty_port_tty_get(port);
if (tty) {
if (!disc)
return 0;
+ mutex_lock(&tty->atomic_write_lock);
ret = tty_ldisc_receive_buf(disc, p, (char *)f, count);
+ mutex_unlock(&tty->atomic_write_lock);
tty_ldisc_deref(disc);
struct tty_driver *driver, unsigned index,
struct device *device, void *drvdata,
const struct attribute_group **attr_grp)
+{
+ tty_port_link_device(port, driver, index);
+ return tty_register_device_attr(driver, index, device, drvdata,
+ attr_grp);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device_attr);
+
+/**
+ * tty_port_register_device_attr_serdev - register tty or serdev device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ * @drvdata: driver data for the device
+ * @attr_grp: attribute group for the device
+ *
+ * Register a serdev or tty device depending on if the parent device has any
+ * defined serdev clients or not.
+ */
+struct device *tty_port_register_device_attr_serdev(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp)
{
struct device *dev;
tty_port_link_device(port, driver, index);
dev = serdev_tty_port_register(port, device, driver, index);
- if (PTR_ERR(dev) != -ENODEV)
+ if (PTR_ERR(dev) != -ENODEV) {
/* Skip creating cdev if we registered a serdev device */
return dev;
+ }
return tty_register_device_attr(driver, index, device, drvdata,
attr_grp);
}
-EXPORT_SYMBOL_GPL(tty_port_register_device_attr);
+EXPORT_SYMBOL_GPL(tty_port_register_device_attr_serdev);
+
+/**
+ * tty_port_register_device_serdev - register tty or serdev device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ *
+ * Register a serdev or tty device depending on if the parent device has any
+ * defined serdev clients or not.
+ */
+struct device *tty_port_register_device_serdev(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device)
+{
+ return tty_port_register_device_attr_serdev(port, driver, index,
+ device, NULL, NULL);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device_serdev);
+
+/**
+ * tty_port_unregister_device - deregister a tty or serdev device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ *
+ * If a tty or serdev device is registered with a call to
+ * tty_port_register_device_serdev() then this function must be called when
+ * the device is gone.
+ */
+void tty_port_unregister_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index)
+{
+ int ret;
+
+ ret = serdev_tty_port_unregister(port);
+ if (ret == 0)
+ return;
+
+ tty_unregister_device(driver, index);
+}
+EXPORT_SYMBOL_GPL(tty_port_unregister_device);
int tty_port_alloc_xmit_buf(struct tty_port *port)
{
/* check if last port ref was dropped before tty release */
if (WARN_ON(port->itty))
return;
-
- serdev_tty_port_unregister(port);
-
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
tty_port_destroy(port);
}
size = i_size_read(inode);
- if (!(mode & FALLOC_FL_KEEP_SIZE))
+ if (!(mode & FALLOC_FL_KEEP_SIZE)) {
endoff = offset + length;
+ ret = inode_newsize_ok(inode, endoff);
+ if (ret)
+ goto unlock;
+ }
if (fi->fmode & CEPH_FILE_MODE_LAZY)
want = CEPH_CAP_FILE_BUFFER | CEPH_CAP_FILE_LAZYIO;
xfs_bmbt_rec_t *frp;
xfs_fsblock_t nextbno;
xfs_extnum_t num_recs;
- xfs_extnum_t start;
num_recs = xfs_btree_get_numrecs(block);
if (unlikely(i + num_recs > room)) {
* Copy records into the extent records.
*/
frp = XFS_BMBT_REC_ADDR(mp, block, 1);
- start = i;
for (j = 0; j < num_recs; j++, i++, frp++) {
xfs_bmbt_rec_host_t *trp = xfs_iext_get_ext(ifp, i);
trp->l0 = be64_to_cpu(frp->l0);
}
temp = xfs_bmap_worst_indlen(bma->ip, temp);
temp2 = xfs_bmap_worst_indlen(bma->ip, temp2);
- diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
- (bma->cur ? bma->cur->bc_private.b.allocated : 0));
+ diff = (int)(temp + temp2 -
+ (startblockval(PREV.br_startblock) -
+ (bma->cur ?
+ bma->cur->bc_private.b.allocated : 0)));
if (diff > 0) {
error = xfs_mod_fdblocks(bma->ip->i_mount,
-((int64_t)diff), false);
temp = da_new;
if (bma->cur)
temp += bma->cur->bc_private.b.allocated;
- ASSERT(temp <= da_old);
if (temp < da_old)
xfs_mod_fdblocks(bma->ip->i_mount,
(int64_t)(da_old - temp), false);
xfs_btree_readahead_ptr(cur, ptr, 1);
/* save for the next iteration of the loop */
- lptr = *ptr;
+ xfs_btree_copy_ptrs(cur, &lptr, ptr, 1);
}
/* for each buffer in the level */
if (mp->m_sb.sb_agblocks >= XFS_REFC_COW_START)
return -EOPNOTSUPP;
- error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
+ INIT_LIST_HEAD(&debris);
+
+ /*
+ * In this first part, we use an empty transaction to gather up
+ * all the leftover CoW extents so that we can subsequently
+ * delete them. The empty transaction is used to avoid
+ * a buffer lock deadlock if there happens to be a loop in the
+ * refcountbt because we're allowed to re-grab a buffer that is
+ * already attached to our transaction. When we're done
+ * recording the CoW debris we cancel the (empty) transaction
+ * and everything goes away cleanly.
+ */
+ error = xfs_trans_alloc_empty(mp, &tp);
if (error)
return error;
- cur = xfs_refcountbt_init_cursor(mp, NULL, agbp, agno, NULL);
+
+ error = xfs_alloc_read_agf(mp, tp, agno, 0, &agbp);
+ if (error)
+ goto out_trans;
+ cur = xfs_refcountbt_init_cursor(mp, tp, agbp, agno, NULL);
/* Find all the leftover CoW staging extents. */
- INIT_LIST_HEAD(&debris);
memset(&low, 0, sizeof(low));
memset(&high, 0, sizeof(high));
low.rc.rc_startblock = XFS_REFC_COW_START;
if (error)
goto out_cursor;
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
- xfs_buf_relse(agbp);
+ xfs_trans_brelse(tp, agbp);
+ xfs_trans_cancel(tp);
/* Now iterate the list to free the leftovers */
- list_for_each_entry(rr, &debris, rr_list) {
+ list_for_each_entry_safe(rr, n, &debris, rr_list) {
/* Set up transaction. */
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, 0, 0, 0, &tp);
if (error)
error = xfs_trans_commit(tp);
if (error)
goto out_free;
+
+ list_del(&rr->rr_list);
+ kmem_free(rr);
}
+ return error;
+out_defer:
+ xfs_defer_cancel(&dfops);
+out_trans:
+ xfs_trans_cancel(tp);
out_free:
/* Free the leftover list */
list_for_each_entry_safe(rr, n, &debris, rr_list) {
out_cursor:
xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
- xfs_buf_relse(agbp);
- goto out_free;
-
-out_defer:
- xfs_defer_cancel(&dfops);
- xfs_trans_cancel(tp);
- goto out_free;
+ xfs_trans_brelse(tp, agbp);
+ goto out_trans;
}
}
break;
default:
+ /* Local format data forks report no extents. */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL) {
+ bmv->bmv_entries = 0;
+ return 0;
+ }
if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
- ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+ ip->i_d.di_format != XFS_DINODE_FMT_BTREE)
return -EINVAL;
if (xfs_get_extsz_hint(ip) ||
* extents.
*/
if (map[i].br_startblock == DELAYSTARTBLOCK &&
- map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
+ map[i].br_startoff < XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
ASSERT((iflags & BMV_IF_DELALLOC) != 0);
if (map[i].br_startblock == HOLESTARTBLOCK &&
index = startoff >> PAGE_SHIFT;
endoff = XFS_FSB_TO_B(mp, map->br_startoff + map->br_blockcount);
- end = endoff >> PAGE_SHIFT;
+ end = (endoff - 1) >> PAGE_SHIFT;
do {
int want;
unsigned nr_pages;
unsigned int i;
- want = min_t(pgoff_t, end - index, PAGEVEC_SIZE);
+ want = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1;
nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index,
want);
- /*
- * No page mapped into given range. If we are searching holes
- * and if this is the first time we got into the loop, it means
- * that the given offset is landed in a hole, return it.
- *
- * If we have already stepped through some block buffers to find
- * holes but they all contains data. In this case, the last
- * offset is already updated and pointed to the end of the last
- * mapped page, if it does not reach the endpoint to search,
- * that means there should be a hole between them.
- */
- if (nr_pages == 0) {
- /* Data search found nothing */
- if (type == DATA_OFF)
- break;
-
- ASSERT(type == HOLE_OFF);
- if (lastoff == startoff || lastoff < endoff) {
- found = true;
- *offset = lastoff;
- }
- break;
- }
-
- /*
- * At lease we found one page. If this is the first time we
- * step into the loop, and if the first page index offset is
- * greater than the given search offset, a hole was found.
- */
- if (type == HOLE_OFF && lastoff == startoff &&
- lastoff < page_offset(pvec.pages[0])) {
- found = true;
+ if (nr_pages == 0)
break;
- }
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
* file mapping. However, page->index will not change
* because we have a reference on the page.
*
- * Searching done if the page index is out of range.
- * If the current offset is not reaches the end of
- * the specified search range, there should be a hole
- * between them.
+ * If current page offset is beyond where we've ended,
+ * we've found a hole.
*/
- if (page->index > end) {
- if (type == HOLE_OFF && lastoff < endoff) {
- *offset = lastoff;
- found = true;
- }
+ if (type == HOLE_OFF && lastoff < endoff &&
+ lastoff < page_offset(pvec.pages[i])) {
+ found = true;
+ *offset = lastoff;
goto out;
}
+ /* Searching done if the page index is out of range. */
+ if (page->index > end)
+ goto out;
lock_page(page);
/*
/*
* The number of returned pages less than our desired, search
- * done. In this case, nothing was found for searching data,
- * but we found a hole behind the last offset.
+ * done.
*/
- if (nr_pages < want) {
- if (type == HOLE_OFF) {
- *offset = lastoff;
- found = true;
- }
+ if (nr_pages < want)
break;
- }
index = pvec.pages[i - 1]->index + 1;
pagevec_release(&pvec);
} while (index <= end);
+ /* No page at lastoff and we are not done - we found a hole. */
+ if (type == HOLE_OFF && lastoff < endoff) {
+ *offset = lastoff;
+ found = true;
+ }
out:
pagevec_release(&pvec);
return found;
struct xfs_fsmap dkeys[2]; /* per-dev keys */
struct xfs_getfsmap_dev handlers[XFS_GETFSMAP_DEVS];
struct xfs_getfsmap_info info = { NULL };
+ bool use_rmap;
int i;
int error = 0;
!xfs_getfsmap_is_valid_device(mp, &head->fmh_keys[1]))
return -EINVAL;
+ use_rmap = capable(CAP_SYS_ADMIN) &&
+ xfs_sb_version_hasrmapbt(&mp->m_sb);
head->fmh_entries = 0;
/* Set up our device handlers. */
memset(handlers, 0, sizeof(handlers));
handlers[0].dev = new_encode_dev(mp->m_ddev_targp->bt_dev);
- if (xfs_sb_version_hasrmapbt(&mp->m_sb))
+ if (use_rmap)
handlers[0].fn = xfs_getfsmap_datadev_rmapbt;
else
handlers[0].fn = xfs_getfsmap_datadev_bnobt;
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_SR_H
+#define _CLOCK_BCM_SR_H
+
+/* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
+#define BCM_SR_GENPLL0 0
+#define BCM_SR_GENPLL0_SATA_CLK 1
+#define BCM_SR_GENPLL0_SCR_CLK 2
+#define BCM_SR_GENPLL0_250M_CLK 3
+#define BCM_SR_GENPLL0_PCIE_AXI_CLK 4
+#define BCM_SR_GENPLL0_PAXC_AXI_X2_CLK 5
+#define BCM_SR_GENPLL0_PAXC_AXI_CLK 6
+
+/* GENPLL 1 clock channel ID MHB PCIE NITRO */
+#define BCM_SR_GENPLL1 0
+#define BCM_SR_GENPLL1_PCIE_TL_CLK 1
+#define BCM_SR_GENPLL1_MHB_APB_CLK 2
+
+/* GENPLL 2 clock channel ID NITRO MHB*/
+#define BCM_SR_GENPLL2 0
+#define BCM_SR_GENPLL2_NIC_CLK 1
+#define BCM_SR_GENPLL2_250_NITRO_CLK 2
+#define BCM_SR_GENPLL2_125_NITRO_CLK 3
+#define BCM_SR_GENPLL2_CHIMP_CLK 4
+
+/* GENPLL 3 HSLS clock channel ID */
+#define BCM_SR_GENPLL3 0
+#define BCM_SR_GENPLL3_HSLS_CLK 1
+#define BCM_SR_GENPLL3_SDIO_CLK 2
+
+/* GENPLL 4 SCR clock channel ID */
+#define BCM_SR_GENPLL4 0
+#define BCM_SR_GENPLL4_CCN_CLK 1
+
+/* GENPLL 5 FS4 clock channel ID */
+#define BCM_SR_GENPLL5 0
+#define BCM_SR_GENPLL5_FS_CLK 1
+#define BCM_SR_GENPLL5_SPU_CLK 2
+
+/* GENPLL 6 NITRO clock channel ID */
+#define BCM_SR_GENPLL6 0
+#define BCM_SR_GENPLL6_48_USB_CLK 1
+
+/* LCPLL0 clock channel ID */
+#define BCM_SR_LCPLL0 0
+#define BCM_SR_LCPLL0_SATA_REF_CLK 1
+#define BCM_SR_LCPLL0_USB_REF_CLK 2
+#define BCM_SR_LCPLL0_SATA_REFPN_CLK 3
+
+/* LCPLL1 clock channel ID */
+#define BCM_SR_LCPLL1 0
+#define BCM_SR_LCPLL1_WAN_CLK 1
+
+/* LCPLL PCIE clock channel ID */
+#define BCM_SR_LCPLL_PCIE 0
+#define BCM_SR_LCPLL_PCIE_PHY_REF_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL0 0
+#define BCM_SR_EMEMPLL0_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL1 0
+#define BCM_SR_EMEMPLL1_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL2 0
+#define BCM_SR_EMEMPLL2_EMEM_CLK 1
+
+#endif /* _CLOCK_BCM_SR_H */
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+
+/* Alternate functions available in MUX controller */
+#define MODE_NITRO 0
+#define MODE_NAND 1
+#define MODE_PNOR 2
+#define MODE_GPIO 3
+
+/* Pad configuration attribute */
+#define PAD_SLEW_RATE_ENA (1 << 0)
+#define PAD_SLEW_RATE_ENA_MASK (1 << 0)
+
+#define PAD_DRIVE_STRENGTH_2_MA (0 << 1)
+#define PAD_DRIVE_STRENGTH_4_MA (1 << 1)
+#define PAD_DRIVE_STRENGTH_6_MA (2 << 1)
+#define PAD_DRIVE_STRENGTH_8_MA (3 << 1)
+#define PAD_DRIVE_STRENGTH_10_MA (4 << 1)
+#define PAD_DRIVE_STRENGTH_12_MA (5 << 1)
+#define PAD_DRIVE_STRENGTH_14_MA (6 << 1)
+#define PAD_DRIVE_STRENGTH_16_MA (7 << 1)
+#define PAD_DRIVE_STRENGTH_MASK (7 << 1)
+
+#define PAD_PULL_UP_ENA (1 << 4)
+#define PAD_PULL_UP_ENA_MASK (1 << 4)
+
+#define PAD_PULL_DOWN_ENA (1 << 5)
+#define PAD_PULL_DOWN_ENA_MASK (1 << 5)
+
+#define PAD_INPUT_PATH_DIS (1 << 6)
+#define PAD_INPUT_PATH_DIS_MASK (1 << 6)
+
+#define PAD_HYSTERESIS_ENA (1 << 7)
+#define PAD_HYSTERESIS_ENA_MASK (1 << 7)
+
+#endif
bool kick_requeue_list);
void blk_mq_kick_requeue_list(struct request_queue *q);
void blk_mq_delay_kick_requeue_list(struct request_queue *q, unsigned long msecs);
-void blk_mq_abort_requeue_list(struct request_queue *q);
void blk_mq_complete_request(struct request *rq);
bool blk_mq_queue_stopped(struct request_queue *q);
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/string.h>
+
#ifdef CONFIG_CEPH_LIB_PRETTYDEBUG
/*
*/
# if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
-extern const char *ceph_file_part(const char *s, int len);
# define dout(fmt, ...) \
pr_debug("%.*s %12.12s:%-4d : " fmt, \
8 - (int)sizeof(KBUILD_MODNAME), " ", \
- ceph_file_part(__FILE__, sizeof(__FILE__)), \
- __LINE__, ##__VA_ARGS__)
+ kbasename(__FILE__), __LINE__, ##__VA_ARGS__)
# else
/* faux printk call just to see any compiler warnings. */
# define dout(fmt, ...) do { \
.off = OFF, \
.imm = IMM })
+/* Unconditional jumps, goto pc + off16 */
+
+#define BPF_JMP_A(OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP | BPF_JA, \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = OFF, \
+ .imm = 0 })
+
/* Function call */
#define BPF_EMIT_CALL(FUNC) \
static inline netdev_features_t vlan_features_check(const struct sk_buff *skb,
netdev_features_t features)
{
- if (skb_vlan_tagged_multi(skb))
- features = netdev_intersect_features(features,
- NETIF_F_SG |
- NETIF_F_HIGHDMA |
- NETIF_F_FRAGLIST |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_STAG_TX);
+ if (skb_vlan_tagged_multi(skb)) {
+ /* In the case of multi-tagged packets, use a direct mask
+ * instead of using netdev_interesect_features(), to make
+ * sure that only devices supporting NETIF_F_HW_CSUM will
+ * have checksum offloading support.
+ */
+ features &= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM |
+ NETIF_F_FRAGLIST | NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_STAG_TX;
+ }
return features;
}
};
enum {
- CQE_RSS_HTYPE_IP = 0x3 << 6,
- CQE_RSS_HTYPE_L4 = 0x3 << 2,
+ CQE_RSS_HTYPE_IP = 0x3 << 2,
+ /* cqe->rss_hash_type[3:2] - IP destination selected for hash
+ * (00 = none, 01 = IPv4, 10 = IPv6, 11 = Reserved)
+ */
+ CQE_RSS_HTYPE_L4 = 0x3 << 6,
+ /* cqe->rss_hash_type[7:6] - L4 destination selected for hash
+ * (00 = none, 01 = TCP. 10 = UDP, 11 = IPSEC.SPI
+ */
};
enum {
typedef void (*mlx5_cmd_cbk_t)(int status, void *context);
+enum {
+ MLX5_CMD_ENT_STATE_PENDING_COMP,
+};
+
struct mlx5_cmd_work_ent {
+ unsigned long state;
struct mlx5_cmd_msg *in;
struct mlx5_cmd_msg *out;
void *uout;
void mlx5_rsc_event(struct mlx5_core_dev *dev, u32 rsn, int event_type);
void mlx5_srq_event(struct mlx5_core_dev *dev, u32 srqn, int event_type);
struct mlx5_core_srq *mlx5_core_get_srq(struct mlx5_core_dev *dev, u32 srqn);
-void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec);
+void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool forced);
void mlx5_cq_event(struct mlx5_core_dev *dev, u32 cqn, int event_type);
int mlx5_create_map_eq(struct mlx5_core_dev *dev, struct mlx5_eq *eq, u8 vecidx,
int nent, u64 mask, const char *name,
int xt_target_to_user(const struct xt_entry_target *t,
struct xt_entry_target __user *u);
int xt_data_to_user(void __user *dst, const void *src,
- int usersize, int size);
+ int usersize, int size, int aligned_size);
void *xt_copy_counters_from_user(const void __user *user, unsigned int len,
struct xt_counters_info *info, bool compat);
/* True if the target is not a standard target */
#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
+static inline bool ebt_invalid_target(int target)
+{
+ return (target < -NUM_STANDARD_TARGETS || target >= 0);
+}
+
#endif
const char *bus_id,
struct device *parent);
+extern int of_platform_device_destroy(struct device *dev, void *data);
extern int of_platform_bus_probe(struct device_node *root,
const struct of_device_id *matches,
struct device *parent);
PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
/* Do not use FLR even if device advertises PCI_AF_CAP */
PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
+ /*
+ * Resume before calling the driver's system suspend hooks, disabling
+ * the direct_complete optimization.
+ */
+ PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11),
};
enum pci_irq_reroute_variant {
unsigned int max_vecs, unsigned int flags,
const struct irq_affinity *aff_desc)
{
- if (min_vecs > 1)
- return -EINVAL;
- return 1;
+ if ((flags & PCI_IRQ_LEGACY) && min_vecs == 1 && dev->irq)
+ return 1;
+ return -ENOSPC;
}
static inline void pci_free_irq_vectors(struct pci_dev *dev)
unsigned long addr, unsigned long data);
extern void ptrace_notify(int exit_code);
extern void __ptrace_link(struct task_struct *child,
- struct task_struct *new_parent);
+ struct task_struct *new_parent,
+ const struct cred *ptracer_cred);
extern void __ptrace_unlink(struct task_struct *child);
extern void exit_ptrace(struct task_struct *tracer, struct list_head *dead);
#define PTRACE_MODE_READ 0x01
if (unlikely(ptrace) && current->ptrace) {
child->ptrace = current->ptrace;
- __ptrace_link(child, current->parent);
+ __ptrace_link(child, current->parent, current->ptracer_cred);
if (child->ptrace & PT_SEIZED)
task_set_jobctl_pending(child, JOBCTL_TRAP_STOP);
set_tsk_thread_flag(child, TIF_SIGPENDING);
}
+ else
+ child->ptracer_cred = NULL;
}
/**
void serdev_device_close(struct serdev_device *);
unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
void serdev_device_set_flow_control(struct serdev_device *, bool);
+int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
void serdev_device_wait_until_sent(struct serdev_device *, long);
int serdev_device_get_tiocm(struct serdev_device *);
int serdev_device_set_tiocm(struct serdev_device *, int, int);
return 0;
}
static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
+static inline int serdev_device_write_buf(struct serdev_device *serdev,
+ const unsigned char *buf,
+ size_t count)
+{
+ return -ENODEV;
+}
static inline void serdev_device_wait_until_sent(struct serdev_device *sdev, long timeout) {}
static inline int serdev_device_get_tiocm(struct serdev_device *serdev)
{
struct device *serdev_tty_port_register(struct tty_port *port,
struct device *parent,
struct tty_driver *drv, int idx);
-void serdev_tty_port_unregister(struct tty_port *port);
+int serdev_tty_port_unregister(struct tty_port *port);
#else
static inline struct device *serdev_tty_port_register(struct tty_port *port,
struct device *parent,
{
return ERR_PTR(-ENODEV);
}
-static inline void serdev_tty_port_unregister(struct tty_port *port) {}
-#endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */
-
-static inline int serdev_device_write_buf(struct serdev_device *serdev,
- const unsigned char *data,
- size_t count)
+static inline int serdev_tty_port_unregister(struct tty_port *port)
{
- return serdev_device_write(serdev, data, count, 0);
+ return -ENODEV;
}
+#endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */
#endif /*_LINUX_SERDEV_H */
struct tty_driver *driver, unsigned index,
struct device *device, void *drvdata,
const struct attribute_group **attr_grp);
+extern struct device *tty_port_register_device_serdev(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device);
+extern struct device *tty_port_register_device_attr_serdev(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp);
+extern void tty_port_unregister_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_destroy(struct tty_port *port);
};
extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf);
extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
extern void usbnet_cdc_status(struct usbnet *, struct urb *);
};
};
+struct dst_metrics {
+ u32 metrics[RTAX_MAX];
+ atomic_t refcnt;
+};
+extern const struct dst_metrics dst_default_metrics;
+
u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
-extern const u32 dst_default_metrics[];
#define DST_METRICS_READ_ONLY 0x1UL
+#define DST_METRICS_REFCOUNTED 0x2UL
#define DST_METRICS_FLAGS 0x3UL
#define __DST_METRICS_PTR(Y) \
((u32 *)((Y) & ~DST_METRICS_FLAGS))
__be32 fib_prefsrc;
u32 fib_tb_id;
u32 fib_priority;
- u32 *fib_metrics;
-#define fib_mtu fib_metrics[RTAX_MTU-1]
-#define fib_window fib_metrics[RTAX_WINDOW-1]
-#define fib_rtt fib_metrics[RTAX_RTT-1]
-#define fib_advmss fib_metrics[RTAX_ADVMSS-1]
+ struct dst_metrics *fib_metrics;
+#define fib_mtu fib_metrics->metrics[RTAX_MTU-1]
+#define fib_window fib_metrics->metrics[RTAX_WINDOW-1]
+#define fib_rtt fib_metrics->metrics[RTAX_RTT-1]
+#define fib_advmss fib_metrics->metrics[RTAX_ADVMSS-1]
int fib_nhs;
#ifdef CONFIG_IP_ROUTE_MULTIPATH
int fib_weight;
#ifndef _NF_CONNTRACK_HELPER_H
#define _NF_CONNTRACK_HELPER_H
+#include <linux/refcount.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_extend.h>
#include <net/netfilter/nf_conntrack_expect.h>
struct hlist_node hnode; /* Internal use. */
char name[NF_CT_HELPER_NAME_LEN]; /* name of the module */
+ refcount_t refcnt;
struct module *me; /* pointer to self */
const struct nf_conntrack_expect_policy *expect_policy;
struct nf_conntrack_helper *nf_conntrack_helper_try_module_get(const char *name,
u16 l3num,
u8 protonum);
+void nf_conntrack_helper_put(struct nf_conntrack_helper *helper);
+
void nf_ct_helper_init(struct nf_conntrack_helper *helper,
u16 l3num, u16 protonum, const char *name,
u16 default_port, u16 spec_port, u32 id,
int nft_data_init(const struct nft_ctx *ctx,
struct nft_data *data, unsigned int size,
struct nft_data_desc *desc, const struct nlattr *nla);
-void nft_data_uninit(const struct nft_data *data, enum nft_data_types type);
+void nft_data_release(const struct nft_data *data, enum nft_data_types type);
int nft_data_dump(struct sk_buff *skb, int attr, const struct nft_data *data,
enum nft_data_types type, unsigned int len);
#include <linux/types.h>
#include <net/act_api.h>
+#include <linux/tc_act/tc_csum.h>
struct tcf_csum {
struct tc_action common;
};
#define to_tcf_csum(a) ((struct tcf_csum *)a)
+static inline bool is_tcf_csum(const struct tc_action *a)
+{
+#ifdef CONFIG_NET_CLS_ACT
+ if (a->ops && a->ops->type == TCA_ACT_CSUM)
+ return true;
+#endif
+ return false;
+}
+
+static inline u32 tcf_csum_update_flags(const struct tc_action *a)
+{
+ return to_tcf_csum(a)->update_flags;
+}
+
#endif /* __NET_TC_CSUM_H */
struct flow_cache_object flo;
struct xfrm_policy *pols[XFRM_POLICY_TYPE_MAX];
int num_pols, num_xfrms;
-#ifdef CONFIG_XFRM_SUB_POLICY
- struct flowi *origin;
- struct xfrm_selector *partner;
-#endif
u32 xfrm_genid;
u32 policy_genid;
u32 route_mtu_cached;
dst_release(xdst->route);
if (likely(xdst->u.dst.xfrm))
xfrm_state_put(xdst->u.dst.xfrm);
-#ifdef CONFIG_XFRM_SUB_POLICY
- kfree(xdst->origin);
- xdst->origin = NULL;
- kfree(xdst->partner);
- xdst->partner = NULL;
-#endif
}
#endif
array->map.key_size = attr->key_size;
array->map.value_size = attr->value_size;
array->map.max_entries = attr->max_entries;
+ array->map.map_flags = attr->map_flags;
array->elem_size = elem_size;
if (!percpu)
trie->map.key_size = attr->key_size;
trie->map.value_size = attr->value_size;
trie->map.max_entries = attr->max_entries;
+ trie->map.map_flags = attr->map_flags;
trie->data_size = attr->key_size -
offsetof(struct bpf_lpm_trie_key, data);
trie->max_prefixlen = trie->data_size * 8;
smap->map.key_size = attr->key_size;
smap->map.value_size = value_size;
smap->map.max_entries = attr->max_entries;
+ smap->map.map_flags = attr->map_flags;
smap->n_buckets = n_buckets;
smap->map.pages = round_up(cost, PAGE_SIZE) >> PAGE_SHIFT;
BPF_REG_0, BPF_REG_1, BPF_REG_2, BPF_REG_3, BPF_REG_4, BPF_REG_5
};
+static void mark_reg_not_init(struct bpf_reg_state *regs, u32 regno)
+{
+ BUG_ON(regno >= MAX_BPF_REG);
+
+ memset(®s[regno], 0, sizeof(regs[regno]));
+ regs[regno].type = NOT_INIT;
+ regs[regno].min_value = BPF_REGISTER_MIN_RANGE;
+ regs[regno].max_value = BPF_REGISTER_MAX_RANGE;
+}
+
static void init_reg_state(struct bpf_reg_state *regs)
{
int i;
- for (i = 0; i < MAX_BPF_REG; i++) {
- regs[i].type = NOT_INIT;
- regs[i].imm = 0;
- regs[i].min_value = BPF_REGISTER_MIN_RANGE;
- regs[i].max_value = BPF_REGISTER_MAX_RANGE;
- regs[i].min_align = 0;
- regs[i].aux_off = 0;
- regs[i].aux_off_align = 0;
- }
+ for (i = 0; i < MAX_BPF_REG; i++)
+ mark_reg_not_init(regs, i);
/* frame pointer */
regs[BPF_REG_FP].type = FRAME_PTR;
reg_off += reg->aux_off;
}
- /* skb->data is NET_IP_ALIGN-ed, but for strict alignment checking
- * we force this to 2 which is universally what architectures use
- * when they don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS.
+ /* For platforms that do not have a Kconfig enabling
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS the value of
+ * NET_IP_ALIGN is universally set to '2'. And on platforms
+ * that do set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, we get
+ * to this code only in strict mode where we want to emulate
+ * the NET_IP_ALIGN==2 checking. Therefore use an
+ * unconditional IP align value of '2'.
*/
- ip_align = strict ? 2 : NET_IP_ALIGN;
+ ip_align = 2;
if ((ip_align + reg_off + off) % size != 0) {
verbose("misaligned packet access off %d+%d+%d size %d\n",
ip_align, reg_off, off, size);
{
bool strict = env->strict_alignment;
- if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
- strict = true;
-
switch (reg->type) {
case PTR_TO_PACKET:
return check_pkt_ptr_alignment(reg, off, size, strict);
struct bpf_verifier_state *state = &env->cur_state;
const struct bpf_func_proto *fn = NULL;
struct bpf_reg_state *regs = state->regs;
- struct bpf_reg_state *reg;
struct bpf_call_arg_meta meta;
bool changes_data;
int i, err;
}
/* reset caller saved regs */
- for (i = 0; i < CALLER_SAVED_REGS; i++) {
- reg = regs + caller_saved[i];
- reg->type = NOT_INIT;
- reg->imm = 0;
- }
+ for (i = 0; i < CALLER_SAVED_REGS; i++)
+ mark_reg_not_init(regs, caller_saved[i]);
/* update return register */
if (fn->ret_type == RET_INTEGER) {
{
struct bpf_reg_state *regs = env->cur_state.regs;
u8 mode = BPF_MODE(insn->code);
- struct bpf_reg_state *reg;
int i, err;
if (!may_access_skb(env->prog->type)) {
}
/* reset caller saved regs to unreadable */
- for (i = 0; i < CALLER_SAVED_REGS; i++) {
- reg = regs + caller_saved[i];
- reg->type = NOT_INIT;
- reg->imm = 0;
- }
+ for (i = 0; i < CALLER_SAVED_REGS; i++)
+ mark_reg_not_init(regs, caller_saved[i]);
/* mark destination R0 register as readable, since it contains
* the value fetched from the packet
/* the following conditions reduce the number of explored insns
* from ~140k to ~80k for ultra large programs that use a lot of ptr_to_packet
*/
-static bool compare_ptrs_to_packet(struct bpf_reg_state *old,
+static bool compare_ptrs_to_packet(struct bpf_verifier_env *env,
+ struct bpf_reg_state *old,
struct bpf_reg_state *cur)
{
if (old->id != cur->id)
* 'if (R4 > data_end)' and all further insn were already good with r=20,
* so they will be good with r=30 and we can prune the search.
*/
- if (old->off <= cur->off &&
+ if (!env->strict_alignment && old->off <= cur->off &&
old->off >= old->range && cur->off >= cur->range)
return true;
continue;
if (rold->type == PTR_TO_PACKET && rcur->type == PTR_TO_PACKET &&
- compare_ptrs_to_packet(rold, rcur))
+ compare_ptrs_to_packet(env, rold, rcur))
continue;
return false;
} else {
log_level = 0;
}
- if (attr->prog_flags & BPF_F_STRICT_ALIGNMENT)
+
+ env->strict_alignment = !!(attr->prog_flags & BPF_F_STRICT_ALIGNMENT);
+ if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
env->strict_alignment = true;
- else
- env->strict_alignment = false;
ret = replace_map_fd_with_map_ptr(env);
if (ret < 0)
mutex_lock(&bpf_verifier_lock);
log_level = 0;
+
env->strict_alignment = false;
+ if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
+ env->strict_alignment = true;
env->explored_states = kcalloc(env->prog->len,
sizeof(struct bpf_verifier_state_list *),
if (!p)
goto fork_out;
+ /*
+ * This _must_ happen before we call free_task(), i.e. before we jump
+ * to any of the bad_fork_* labels. This is to avoid freeing
+ * p->set_child_tid which is (ab)used as a kthread's data pointer for
+ * kernel threads (PF_KTHREAD).
+ */
+ p->set_child_tid = (clone_flags & CLONE_CHILD_SETTID) ? child_tidptr : NULL;
+ /*
+ * Clear TID on mm_release()?
+ */
+ p->clear_child_tid = (clone_flags & CLONE_CHILD_CLEARTID) ? child_tidptr : NULL;
+
ftrace_graph_init_task(p);
rt_mutex_init_task(p);
}
}
- p->set_child_tid = (clone_flags & CLONE_CHILD_SETTID) ? child_tidptr : NULL;
- /*
- * Clear TID on mm_release()?
- */
- p->clear_child_tid = (clone_flags & CLONE_CHILD_CLEARTID) ? child_tidptr : NULL;
#ifdef CONFIG_BLOCK
p->plug = NULL;
#endif
return module_alloc(PAGE_SIZE);
}
-static void free_insn_page(void *page)
+void __weak free_insn_page(void *page)
{
module_memfree(page);
}
int ret;
raw_spin_lock_irq(&lock->wait_lock);
-
- set_current_state(TASK_INTERRUPTIBLE);
-
/* sleep on the mutex */
+ set_current_state(TASK_INTERRUPTIBLE);
ret = __rt_mutex_slowlock(lock, TASK_INTERRUPTIBLE, to, waiter);
-
+ /*
+ * try_to_take_rt_mutex() sets the waiter bit unconditionally. We might
+ * have to fix that up.
+ */
+ fixup_rt_mutex_waiters(lock);
raw_spin_unlock_irq(&lock->wait_lock);
return ret;
bool cleanup = false;
raw_spin_lock_irq(&lock->wait_lock);
+ /*
+ * Do an unconditional try-lock, this deals with the lock stealing
+ * state where __rt_mutex_futex_unlock() -> mark_wakeup_next_waiter()
+ * sets a NULL owner.
+ *
+ * We're not interested in the return value, because the subsequent
+ * test on rt_mutex_owner() will infer that. If the trylock succeeded,
+ * we will own the lock and it will have removed the waiter. If we
+ * failed the trylock, we're still not owner and we need to remove
+ * ourselves.
+ */
+ try_to_take_rt_mutex(lock, current, waiter);
/*
* Unless we're the owner; we're still enqueued on the wait_list.
* So check if we became owner, if not, take us off the wait_list.
*/
if (rt_mutex_owner(lock) != current) {
remove_waiter(lock, waiter);
- fixup_rt_mutex_waiters(lock);
cleanup = true;
}
-
/*
* try_to_take_rt_mutex() sets the waiter bit unconditionally. We might
* have to fix that up.
* Numbers of normal and highmem page frames allocated for hibernation image
* before suspending devices.
*/
-unsigned int alloc_normal, alloc_highmem;
+static unsigned int alloc_normal, alloc_highmem;
/*
* Memory bitmap used for marking saveable pages (during hibernation) or
* hibernation image pages (during restore)
}
+void __ptrace_link(struct task_struct *child, struct task_struct *new_parent,
+ const struct cred *ptracer_cred)
+{
+ BUG_ON(!list_empty(&child->ptrace_entry));
+ list_add(&child->ptrace_entry, &new_parent->ptraced);
+ child->parent = new_parent;
+ child->ptracer_cred = get_cred(ptracer_cred);
+}
+
/*
* ptrace a task: make the debugger its new parent and
* move it to the ptrace list.
*
* Must be called with the tasklist lock write-held.
*/
-void __ptrace_link(struct task_struct *child, struct task_struct *new_parent)
+static void ptrace_link(struct task_struct *child, struct task_struct *new_parent)
{
- BUG_ON(!list_empty(&child->ptrace_entry));
- list_add(&child->ptrace_entry, &new_parent->ptraced);
- child->parent = new_parent;
rcu_read_lock();
- child->ptracer_cred = get_cred(__task_cred(new_parent));
+ __ptrace_link(child, new_parent, __task_cred(new_parent));
rcu_read_unlock();
}
flags |= PT_SEIZED;
task->ptrace = flags;
- __ptrace_link(task, current);
+ ptrace_link(task, current);
/* SEIZE doesn't trap tracee on attach */
if (!seize)
*/
if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace = PT_PTRACED;
- __ptrace_link(current, current->real_parent);
+ ptrace_link(current, current->real_parent);
}
}
write_unlock_irq(&tasklist_lock);
sugov_update_commit(sg_policy, time, next_f);
}
-static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu)
+static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, u64 time)
{
struct sugov_policy *sg_policy = sg_cpu->sg_policy;
struct cpufreq_policy *policy = sg_policy->policy;
- u64 last_freq_update_time = sg_policy->last_freq_update_time;
unsigned long util = 0, max = 1;
unsigned int j;
* enough, don't take the CPU into account as it probably is
* idle now (and clear iowait_boost for it).
*/
- delta_ns = last_freq_update_time - j_sg_cpu->last_update;
+ delta_ns = time - j_sg_cpu->last_update;
if (delta_ns > TICK_NSEC) {
j_sg_cpu->iowait_boost = 0;
continue;
if (flags & SCHED_CPUFREQ_RT_DL)
next_f = sg_policy->policy->cpuinfo.max_freq;
else
- next_f = sugov_next_freq_shared(sg_cpu);
+ next_f = sugov_next_freq_shared(sg_cpu, time);
sugov_update_commit(sg_policy, time, next_f);
}
* At the hard limit, we just die.
* No need to calculate anything else now.
*/
- pr_info("CPU Watchdog Timeout (hard): %s[%d]\n",
- tsk->comm, task_pid_nr(tsk));
+ if (print_fatal_signals) {
+ pr_info("CPU Watchdog Timeout (hard): %s[%d]\n",
+ tsk->comm, task_pid_nr(tsk));
+ }
__group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk);
return;
}
soft += USEC_PER_SEC;
sig->rlim[RLIMIT_RTTIME].rlim_cur = soft;
}
- pr_info("RT Watchdog Timeout (soft): %s[%d]\n",
- tsk->comm, task_pid_nr(tsk));
+ if (print_fatal_signals) {
+ pr_info("RT Watchdog Timeout (soft): %s[%d]\n",
+ tsk->comm, task_pid_nr(tsk));
+ }
__group_send_sig_info(SIGXCPU, SEND_SIG_PRIV, tsk);
}
}
* At the hard limit, we just die.
* No need to calculate anything else now.
*/
- pr_info("RT Watchdog Timeout (hard): %s[%d]\n",
- tsk->comm, task_pid_nr(tsk));
+ if (print_fatal_signals) {
+ pr_info("RT Watchdog Timeout (hard): %s[%d]\n",
+ tsk->comm, task_pid_nr(tsk));
+ }
__group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk);
return;
}
/*
* At the soft limit, send a SIGXCPU every second.
*/
- pr_info("CPU Watchdog Timeout (soft): %s[%d]\n",
- tsk->comm, task_pid_nr(tsk));
+ if (print_fatal_signals) {
+ pr_info("CPU Watchdog Timeout (soft): %s[%d]\n",
+ tsk->comm, task_pid_nr(tsk));
+ }
__group_send_sig_info(SIGXCPU, SEND_SIG_PRIV, tsk);
if (soft < hard) {
soft++;
}
out:
- kfree(fgd->new_hash);
+ free_ftrace_hash(fgd->new_hash);
kfree(fgd);
return ret;
{ },
{ { 0, 1 } },
},
+ {
+ "JMP_JSGE_K: Signed jump: value walk 1",
+ .u.insns_int = {
+ BPF_ALU32_IMM(BPF_MOV, R0, 0),
+ BPF_LD_IMM64(R1, -3),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 6),
+ BPF_ALU64_IMM(BPF_ADD, R1, 1),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 4),
+ BPF_ALU64_IMM(BPF_ADD, R1, 1),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 2),
+ BPF_ALU64_IMM(BPF_ADD, R1, 1),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 1),
+ BPF_EXIT_INSN(), /* bad exit */
+ BPF_ALU32_IMM(BPF_MOV, R0, 1), /* good exit */
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ },
+ {
+ "JMP_JSGE_K: Signed jump: value walk 2",
+ .u.insns_int = {
+ BPF_ALU32_IMM(BPF_MOV, R0, 0),
+ BPF_LD_IMM64(R1, -3),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 4),
+ BPF_ALU64_IMM(BPF_ADD, R1, 2),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 2),
+ BPF_ALU64_IMM(BPF_ADD, R1, 2),
+ BPF_JMP_IMM(BPF_JSGE, R1, 0, 1),
+ BPF_EXIT_INSN(), /* bad exit */
+ BPF_ALU32_IMM(BPF_MOV, R0, 1), /* good exit */
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ },
/* BPF_JMP | BPF_JGT | BPF_K */
{
"JMP_JGT_K: if (3 > 2) return 1",
br_debug(br, "using kernel STP\n");
/* To start timers on any ports left in blocking */
+ mod_timer(&br->hello_timer, jiffies + br->hello_time);
br_port_state_selection(br);
}
if (br->dev->flags & IFF_UP) {
br_config_bpdu_generation(br);
- if (br->stp_enabled != BR_USER_STP)
+ if (br->stp_enabled == BR_KERNEL_STP)
mod_timer(&br->hello_timer,
round_jiffies(jiffies + br->hello_time));
}
if (e->ethproto != htons(ETH_P_ARP) ||
e->invflags & EBT_IPROTO)
return -EINVAL;
+ if (ebt_invalid_target(info->target))
+ return -EINVAL;
+
return 0;
}
strlcpy(name, _name, sizeof(name));
if (copy_to_user(um, name, EBT_FUNCTION_MAXNAMELEN) ||
put_user(datasize, (int __user *)(um + EBT_FUNCTION_MAXNAMELEN)) ||
- xt_data_to_user(um + entrysize, data, usersize, datasize))
+ xt_data_to_user(um + entrysize, data, usersize, datasize,
+ XT_ALIGN(datasize)))
return -EFAULT;
return 0;
if (match->compat_to_user(cm->data, m->data))
return -EFAULT;
} else {
- if (xt_data_to_user(cm->data, m->data, match->usersize, msize))
+ if (xt_data_to_user(cm->data, m->data, match->usersize, msize,
+ COMPAT_XT_ALIGN(msize)))
return -EFAULT;
}
if (target->compat_to_user(cm->data, t->data))
return -EFAULT;
} else {
- if (xt_data_to_user(cm->data, t->data, target->usersize, tsize))
+ if (xt_data_to_user(cm->data, t->data, target->usersize, tsize,
+ COMPAT_XT_ALIGN(tsize)))
return -EFAULT;
}
struct timespec validity;
void *tp, *tpend;
void **ptp;
- struct ceph_crypto_key new_session_key;
+ struct ceph_crypto_key new_session_key = { 0 };
struct ceph_buffer *new_ticket_blob;
unsigned long new_expires, new_renew_after;
u64 new_secret_id;
dout(" ticket blob is %d bytes\n", dlen);
ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad);
blob_struct_v = ceph_decode_8(ptp);
+ if (blob_struct_v != 1)
+ goto bad;
+
new_secret_id = ceph_decode_64(ptp);
ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend);
if (ret)
type, ceph_entity_type_name(type), th->secret_id,
(int)th->ticket_blob->vec.iov_len);
xi->have_keys |= th->service;
-
-out:
- return ret;
+ return 0;
bad:
ret = -EINVAL;
- goto out;
+out:
+ ceph_crypto_key_destroy(&new_session_key);
+ return ret;
}
static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
module_param_cb(supported_features, ¶m_ops_supported_features, NULL,
S_IRUGO);
-/*
- * find filename portion of a path (/foo/bar/baz -> baz)
- */
-const char *ceph_file_part(const char *s, int len)
-{
- const char *e = s + len;
-
- while (e != s && *(e-1) != '/')
- e--;
- return e;
-}
-EXPORT_SYMBOL(ceph_file_part);
-
const char *ceph_msg_type_name(int type)
{
switch (type) {
* Returns true if the result moves the cursor on to the next piece
* of the data item.
*/
-static bool ceph_msg_data_advance(struct ceph_msg_data_cursor *cursor,
- size_t bytes)
+static void ceph_msg_data_advance(struct ceph_msg_data_cursor *cursor,
+ size_t bytes)
{
bool new_piece;
new_piece = true;
}
cursor->need_crc = new_piece;
-
- return new_piece;
}
static size_t sizeof_footer(struct ceph_connection *con)
size_t page_offset;
size_t length;
bool last_piece;
- bool need_crc;
int ret;
page = ceph_msg_data_next(cursor, &page_offset, &length,
}
if (do_datacrc && cursor->need_crc)
crc = ceph_crc32c_page(crc, page, page_offset, length);
- need_crc = ceph_msg_data_advance(cursor, (size_t)ret);
+ ceph_msg_data_advance(cursor, (size_t)ret);
}
dout("%s %p msg %p done\n", __func__, con, msg);
struct ceph_msg *m;
u64 ack = le64_to_cpu(con->in_temp_ack);
u64 seq;
+ bool reconnect = (con->in_tag == CEPH_MSGR_TAG_SEQ);
+ struct list_head *list = reconnect ? &con->out_queue : &con->out_sent;
- while (!list_empty(&con->out_sent)) {
- m = list_first_entry(&con->out_sent, struct ceph_msg,
- list_head);
+ /*
+ * In the reconnect case, con_fault() has requeued messages
+ * in out_sent. We should cleanup old messages according to
+ * the reconnect seq.
+ */
+ while (!list_empty(list)) {
+ m = list_first_entry(list, struct ceph_msg, list_head);
+ if (reconnect && m->needs_out_seq)
+ break;
seq = le64_to_cpu(m->hdr.seq);
if (seq > ack)
break;
m->ack_stamp = jiffies;
ceph_msg_remove(m);
}
+
prepare_read_tag(con);
}
if (do_datacrc)
crc = ceph_crc32c_page(crc, page, page_offset, ret);
- (void) ceph_msg_data_advance(cursor, (size_t)ret);
+ ceph_msg_data_advance(cursor, (size_t)ret);
}
if (do_datacrc)
con->in_data_crc = crc;
int i, err = -EINVAL;
struct ceph_fsid fsid;
u32 epoch, num_mon;
- u16 version;
u32 len;
ceph_decode_32_safe(&p, end, len, bad);
ceph_decode_need(&p, end, len, bad);
dout("monmap_decode %p %p len %d\n", p, end, (int)(end-p));
-
- ceph_decode_16_safe(&p, end, version, bad);
+ p += sizeof(u16); /* skip version */
ceph_decode_need(&p, end, sizeof(fsid) + 2*sizeof(u32), bad);
ceph_decode_copy(&p, &fsid, sizeof(fsid));
u32 yes;
struct crush_rule *r;
+ err = -EINVAL;
ceph_decode_32_safe(p, end, yes, bad);
if (!yes) {
dout("crush_decode NO rule %d off %x %p to %p\n",
}
EXPORT_SYMBOL(dst_discard_out);
-const u32 dst_default_metrics[RTAX_MAX + 1] = {
+const struct dst_metrics dst_default_metrics = {
/* This initializer is needed to force linker to place this variable
* into const section. Otherwise it might end into bss section.
* We really want to avoid false sharing on this variable, and catch
* any writes on it.
*/
- [RTAX_MAX] = 0xdeadbeef,
+ .refcnt = ATOMIC_INIT(1),
};
void dst_init(struct dst_entry *dst, struct dst_ops *ops,
if (dev)
dev_hold(dev);
dst->ops = ops;
- dst_init_metrics(dst, dst_default_metrics, true);
+ dst_init_metrics(dst, dst_default_metrics.metrics, true);
dst->expires = 0UL;
dst->path = dst;
dst->from = NULL;
u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old)
{
- u32 *p = kmalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
+ struct dst_metrics *p = kmalloc(sizeof(*p), GFP_ATOMIC);
if (p) {
- u32 *old_p = __DST_METRICS_PTR(old);
+ struct dst_metrics *old_p = (struct dst_metrics *)__DST_METRICS_PTR(old);
unsigned long prev, new;
- memcpy(p, old_p, sizeof(u32) * RTAX_MAX);
+ atomic_set(&p->refcnt, 1);
+ memcpy(p->metrics, old_p->metrics, sizeof(p->metrics));
new = (unsigned long) p;
prev = cmpxchg(&dst->_metrics, old, new);
if (prev != old) {
kfree(p);
- p = __DST_METRICS_PTR(prev);
+ p = (struct dst_metrics *)__DST_METRICS_PTR(prev);
if (prev & DST_METRICS_READ_ONLY)
p = NULL;
+ } else if (prev & DST_METRICS_REFCOUNTED) {
+ if (atomic_dec_and_test(&old_p->refcnt))
+ kfree(old_p);
}
}
- return p;
+ BUILD_BUG_ON(offsetof(struct dst_metrics, metrics) != 0);
+ return (u32 *)p;
}
EXPORT_SYMBOL(dst_cow_metrics_generic);
{
unsigned long prev, new;
- new = ((unsigned long) dst_default_metrics) | DST_METRICS_READ_ONLY;
+ new = ((unsigned long) &dst_default_metrics) | DST_METRICS_READ_ONLY;
prev = cmpxchg(&dst->_metrics, old, new);
if (prev == old)
kfree(__DST_METRICS_PTR(old));
func == bpf_skb_change_head ||
func == bpf_skb_change_tail ||
func == bpf_skb_pull_data ||
+ func == bpf_clone_redirect ||
func == bpf_l3_csum_replace ||
func == bpf_l4_csum_replace ||
func == bpf_xdp_adjust_head)
goto out;
}
+static int __net_init net_defaults_init_net(struct net *net)
+{
+ net->core.sysctl_somaxconn = SOMAXCONN;
+ return 0;
+}
+
+static struct pernet_operations net_defaults_ops = {
+ .init = net_defaults_init_net,
+};
+
+static __init int net_defaults_init(void)
+{
+ if (register_pernet_subsys(&net_defaults_ops))
+ panic("Cannot initialize net default settings");
+
+ return 0;
+}
+
+core_initcall(net_defaults_init);
#ifdef CONFIG_NET_NS
static struct ucounts *inc_net_namespaces(struct user_namespace *ns)
int err = 0;
int fidx = 0;
- if (nlmsg_parse(cb->nlh, sizeof(struct ifinfomsg), tb,
- IFLA_MAX, ifla_policy, NULL) == 0) {
+ err = nlmsg_parse(cb->nlh, sizeof(struct ifinfomsg), tb,
+ IFLA_MAX, ifla_policy, NULL);
+ if (err < 0) {
+ return -EINVAL;
+ } else if (err == 0) {
if (tb[IFLA_MASTER])
br_idx = nla_get_u32(tb[IFLA_MASTER]);
}
{
struct ctl_table *tbl;
- net->core.sysctl_somaxconn = SOMAXCONN;
-
tbl = netns_core_table;
if (!net_eq(net, &init_net)) {
tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL);
}
EXPORT_SYMBOL(arp_xmit);
+static bool arp_is_garp(struct net *net, struct net_device *dev,
+ int *addr_type, __be16 ar_op,
+ __be32 sip, __be32 tip,
+ unsigned char *sha, unsigned char *tha)
+{
+ bool is_garp = tip == sip;
+
+ /* Gratuitous ARP _replies_ also require target hwaddr to be
+ * the same as source.
+ */
+ if (is_garp && ar_op == htons(ARPOP_REPLY))
+ is_garp =
+ /* IPv4 over IEEE 1394 doesn't provide target
+ * hardware address field in its ARP payload.
+ */
+ tha &&
+ !memcmp(tha, sha, dev->addr_len);
+
+ if (is_garp) {
+ *addr_type = inet_addr_type_dev_table(net, dev, sip);
+ if (*addr_type != RTN_UNICAST)
+ is_garp = false;
+ }
+ return is_garp;
+}
+
/*
* Process an arp request.
*/
n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
- if (IN_DEV_ARP_ACCEPT(in_dev)) {
- unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
+ addr_type = -1;
+ if (n || IN_DEV_ARP_ACCEPT(in_dev)) {
+ is_garp = arp_is_garp(net, dev, &addr_type, arp->ar_op,
+ sip, tip, sha, tha);
+ }
+ if (IN_DEV_ARP_ACCEPT(in_dev)) {
/* Unsolicited ARP is not accepted by default.
It is possible, that this option should be enabled for some
devices (strip is candidate)
*/
- is_garp = tip == sip && addr_type == RTN_UNICAST;
-
- /* Unsolicited ARP _replies_ also require target hwaddr to be
- * the same as source.
- */
- if (is_garp && arp->ar_op == htons(ARPOP_REPLY))
- is_garp =
- /* IPv4 over IEEE 1394 doesn't provide target
- * hardware address field in its ARP payload.
- */
- tha &&
- !memcmp(tha, sha, dev->addr_len);
-
if (!n &&
- ((arp->ar_op == htons(ARPOP_REPLY) &&
- addr_type == RTN_UNICAST) || is_garp))
+ (is_garp ||
+ (arp->ar_op == htons(ARPOP_REPLY) &&
+ (addr_type == RTN_UNICAST ||
+ (addr_type < 0 &&
+ /* postpone calculation to as late as possible */
+ inet_addr_type_dev_table(net, dev, sip) ==
+ RTN_UNICAST)))))
n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
}
u8 *tail;
u8 *vaddr;
int nfrags;
+ int esph_offset;
struct page *page;
struct sk_buff *trailer;
int tailen = esp->tailen;
}
cow:
+ esph_offset = (unsigned char *)esp->esph - skb_transport_header(skb);
+
nfrags = skb_cow_data(skb, tailen, &trailer);
if (nfrags < 0)
goto out;
tail = skb_tail_pointer(trailer);
- esp->esph = ip_esp_hdr(skb);
+ esp->esph = (struct ip_esp_hdr *)(skb_transport_header(skb) + esph_offset);
skip_cow:
esp_output_fill_trailer(tail, esp->tfclen, esp->plen, esp->proto);
static void free_fib_info_rcu(struct rcu_head *head)
{
struct fib_info *fi = container_of(head, struct fib_info, rcu);
+ struct dst_metrics *m;
change_nexthops(fi) {
if (nexthop_nh->nh_dev)
rt_fibinfo_free(&nexthop_nh->nh_rth_input);
} endfor_nexthops(fi);
- if (fi->fib_metrics != (u32 *) dst_default_metrics)
- kfree(fi->fib_metrics);
+ m = fi->fib_metrics;
+ if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
+ kfree(m);
kfree(fi);
}
val = 255;
if (type == RTAX_FEATURES && (val & ~RTAX_FEATURE_MASK))
return -EINVAL;
- fi->fib_metrics[type - 1] = val;
+ fi->fib_metrics->metrics[type - 1] = val;
}
if (ecn_ca)
- fi->fib_metrics[RTAX_FEATURES - 1] |= DST_FEATURE_ECN_CA;
+ fi->fib_metrics->metrics[RTAX_FEATURES - 1] |= DST_FEATURE_ECN_CA;
return 0;
}
goto failure;
fib_info_cnt++;
if (cfg->fc_mx) {
- fi->fib_metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+ fi->fib_metrics = kzalloc(sizeof(*fi->fib_metrics), GFP_KERNEL);
if (!fi->fib_metrics)
goto failure;
+ atomic_set(&fi->fib_metrics->refcnt, 1);
} else
- fi->fib_metrics = (u32 *) dst_default_metrics;
+ fi->fib_metrics = (struct dst_metrics *)&dst_default_metrics;
fi->fib_net = net;
fi->fib_protocol = cfg->fc_protocol;
if (fi->fib_priority &&
nla_put_u32(skb, RTA_PRIORITY, fi->fib_priority))
goto nla_put_failure;
- if (rtnetlink_put_metrics(skb, fi->fib_metrics) < 0)
+ if (rtnetlink_put_metrics(skb, fi->fib_metrics->metrics) < 0)
goto nla_put_failure;
if (fi->fib_prefsrc &&
static void ipv4_dst_destroy(struct dst_entry *dst)
{
+ struct dst_metrics *p = (struct dst_metrics *)DST_METRICS_PTR(dst);
struct rtable *rt = (struct rtable *) dst;
+ if (p != &dst_default_metrics && atomic_dec_and_test(&p->refcnt))
+ kfree(p);
+
if (!list_empty(&rt->rt_uncached)) {
struct uncached_list *ul = rt->rt_uncached_list;
rt->rt_gateway = nh->nh_gw;
rt->rt_uses_gateway = 1;
}
- dst_init_metrics(&rt->dst, fi->fib_metrics, true);
+ dst_init_metrics(&rt->dst, fi->fib_metrics->metrics, true);
+ if (fi->fib_metrics != &dst_default_metrics) {
+ rt->dst._metrics |= DST_METRICS_REFCOUNTED;
+ atomic_inc(&fi->fib_metrics->refcnt);
+ }
#ifdef CONFIG_IP_ROUTE_CLASSID
rt->dst.tclassid = nh->nh_tclassid;
#endif
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_sock *inet = inet_sk(sk);
+ struct sockaddr *uaddr = msg->msg_name;
int err, flags;
- if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE))
+ if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE) ||
+ (uaddr && msg->msg_namelen >= sizeof(uaddr->sa_family) &&
+ uaddr->sa_family == AF_UNSPEC))
return -EOPNOTSUPP;
if (tp->fastopen_req)
return -EALREADY; /* Another Fast Open is in progress */
}
}
flags = (msg->msg_flags & MSG_DONTWAIT) ? O_NONBLOCK : 0;
- err = __inet_stream_connect(sk->sk_socket, msg->msg_name,
+ err = __inet_stream_connect(sk->sk_socket, uaddr,
msg->msg_namelen, flags, 1);
/* fastopen_req could already be freed in __inet_stream_connect
* if the connection times out or gets rst
tcp_set_ca_state(sk, TCP_CA_Open);
tcp_clear_retrans(tp);
inet_csk_delack_init(sk);
+ /* Initialize rcv_mss to TCP_MIN_MSS to avoid division by 0
+ * issue in __tcp_select_window()
+ */
+ icsk->icsk_ack.rcv_mss = TCP_MIN_MSS;
tcp_init_send_head(sk);
memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
__sk_dst_reset(sk);
memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
- dsfield = ipv4_get_dsfield(iph);
-
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
- fl6.flowlabel |= htonl((__u32)iph->tos << IPV6_TCLASS_SHIFT)
- & IPV6_TCLASS_MASK;
+ dsfield = ipv4_get_dsfield(iph);
+ else
+ dsfield = ip6_tclass(t->parms.flowinfo);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
else
memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
- dsfield = ipv6_get_dsfield(ipv6h);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
+ dsfield = ipv6_get_dsfield(ipv6h);
+ else
+ dsfield = ip6_tclass(t->parms.flowinfo);
+
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
fl6.flowlabel |= ip6_flowlabel(ipv6h);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
*/
alloclen += sizeof(struct frag_hdr);
+ copy = datalen - transhdrlen - fraggap;
+ if (copy < 0) {
+ err = -EINVAL;
+ goto error;
+ }
if (transhdrlen) {
skb = sock_alloc_send_skb(sk,
alloclen + hh_len,
data += fraggap;
pskb_trim_unique(skb_prev, maxfraglen);
}
- copy = datalen - transhdrlen - fraggap;
-
- if (copy < 0) {
- err = -EINVAL;
- kfree_skb(skb);
- goto error;
- } else if (copy > 0 && getfrag(from, data + transhdrlen, offset, copy, fraggap, skb) < 0) {
+ if (copy > 0 &&
+ getfrag(from, data + transhdrlen, offset,
+ copy, fraggap, skb) < 0) {
err = -EFAULT;
kfree_skb(skb);
goto error;
skb_push(skb, sizeof(struct ipv6hdr));
skb_reset_network_header(skb);
ipv6h = ipv6_hdr(skb);
- ip6_flow_hdr(ipv6h, INET_ECN_encapsulate(0, dsfield),
+ ip6_flow_hdr(ipv6h, dsfield,
ip6_make_flowlabel(net, skb, fl6->flowlabel, true, fl6));
ipv6h->hop_limit = hop_limit;
ipv6h->nexthdr = proto;
if (tproto != IPPROTO_IPIP && tproto != 0)
return -1;
- dsfield = ipv4_get_dsfield(iph);
-
if (t->parms.collect_md) {
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
fl6.flowi6_proto = IPPROTO_IPIP;
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
+ dsfield = ip6_tclass(key->label);
} else {
if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
encap_limit = t->parms.encap_limit;
fl6.flowi6_proto = IPPROTO_IPIP;
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
- fl6.flowlabel |= htonl((__u32)iph->tos << IPV6_TCLASS_SHIFT)
- & IPV6_TCLASS_MASK;
+ dsfield = ipv4_get_dsfield(iph);
+ else
+ dsfield = ip6_tclass(t->parms.flowinfo);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
else
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
+ dsfield = INET_ECN_encapsulate(dsfield, ipv4_get_dsfield(iph));
+
skb_set_inner_ipproto(skb, IPPROTO_IPIP);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
ip6_tnl_addr_conflict(t, ipv6h))
return -1;
- dsfield = ipv6_get_dsfield(ipv6h);
-
if (t->parms.collect_md) {
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
fl6.flowi6_proto = IPPROTO_IPV6;
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
+ dsfield = ip6_tclass(key->label);
} else {
offset = ip6_tnl_parse_tlv_enc_lim(skb, skb_network_header(skb));
/* ip6_tnl_parse_tlv_enc_lim() might have reallocated skb->head */
fl6.flowi6_proto = IPPROTO_IPV6;
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
- fl6.flowlabel |= (*(__be32 *)ipv6h & IPV6_TCLASS_MASK);
+ dsfield = ipv6_get_dsfield(ipv6h);
+ else
+ dsfield = ip6_tclass(t->parms.flowinfo);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
fl6.flowlabel |= ip6_flowlabel(ipv6h);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
+ dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
+
skb_set_inner_ipproto(skb, IPPROTO_IPV6);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
p += pol->sadb_x_policy_len*8;
sec_ctx = (struct sadb_x_sec_ctx *)p;
if (len < pol->sadb_x_policy_len*8 +
- sec_ctx->sadb_x_sec_len) {
+ sec_ctx->sadb_x_sec_len*8) {
*dir = -EINVAL;
goto out;
}
int rc = -EINVAL;
dprintk("%s: binding %02X\n", __func__, addr->sllc_sap);
+
+ lock_sock(sk);
if (unlikely(!sock_flag(sk, SOCK_ZAPPED) || addrlen != sizeof(*addr)))
goto out;
rc = -EAFNOSUPPORT;
out_put:
llc_sap_put(sap);
out:
+ release_sock(sk);
return rc;
}
if (is_multicast_ether_addr(hdr->addr1)) {
mpp_addr = hdr->addr3;
proxied_addr = mesh_hdr->eaddr1;
- } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) {
+ } else if ((mesh_hdr->flags & MESH_FLAGS_AE) ==
+ MESH_FLAGS_AE_A5_A6) {
/* has_a4 already checked in ieee80211_rx_mesh_check */
mpp_addr = hdr->addr4;
proxied_addr = mesh_hdr->eaddr2;
{
unsigned int verdict = NF_DROP;
- if (IP_VS_FWD_METHOD(cp) != 0) {
- pr_err("shouldn't reach here, because the box is on the "
- "half connection in the tun/dr module.\n");
- }
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
/* Ensure the checksum is correct */
if (!skb_csum_unnecessary(skb) && ip_vs_checksum_complete(skb, ihl)) {
ip_vs_notrack(skb);
else
ip_vs_update_conntrack(skb, cp, 0);
+
+ignore_cp:
verdict = NF_ACCEPT;
out:
*/
cp = pp->conn_out_get(ipvs, af, skb, &iph);
- if (likely(cp))
+ if (likely(cp)) {
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
return handle_response(af, skb, pd, cp, &iph, hooknum);
+ }
/* Check for real-server-started requests */
if (atomic_read(&ipvs->conn_out_counter)) {
}
}
}
+
+out:
IP_VS_DBG_PKT(12, af, pp, skb, iph.off,
"ip_vs_out: packet continues traversal as normal");
return NF_ACCEPT;
+
+ignore_cp:
+ __ip_vs_conn_put(cp);
+ goto out;
}
/*
#endif
if (h != NULL && !try_module_get(h->me))
h = NULL;
+ if (h != NULL && !refcount_inc_not_zero(&h->refcnt)) {
+ module_put(h->me);
+ h = NULL;
+ }
rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(nf_conntrack_helper_try_module_get);
+void nf_conntrack_helper_put(struct nf_conntrack_helper *helper)
+{
+ refcount_dec(&helper->refcnt);
+ module_put(helper->me);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_helper_put);
+
struct nf_conn_help *
nf_ct_helper_ext_add(struct nf_conn *ct,
struct nf_conntrack_helper *helper, gfp_t gfp)
}
}
}
+ refcount_set(&me->refcnt, 1);
hlist_add_head_rcu(&me->hnode, &nf_ct_helper_hash[h]);
nf_ct_helper_count++;
out:
#include <net/netfilter/nf_conntrack_zones.h>
#include <net/netfilter/nf_conntrack_timestamp.h>
#include <net/netfilter/nf_conntrack_labels.h>
+#include <net/netfilter/nf_conntrack_seqadj.h>
+#include <net/netfilter/nf_conntrack_synproxy.h>
#ifdef CONFIG_NF_NAT_NEEDED
#include <net/netfilter/nf_nat_core.h>
#include <net/netfilter/nf_nat_l4proto.h>
static int
ctnetlink_parse_tuple(const struct nlattr * const cda[],
- struct nf_conntrack_tuple *tuple,
- enum ctattr_type type, u_int8_t l3num,
- struct nf_conntrack_zone *zone)
+ struct nf_conntrack_tuple *tuple, u32 type,
+ u_int8_t l3num, struct nf_conntrack_zone *zone)
{
struct nlattr *tb[CTA_TUPLE_MAX+1];
int err;
nf_ct_tstamp_ext_add(ct, GFP_ATOMIC);
nf_ct_ecache_ext_add(ct, 0, 0, GFP_ATOMIC);
nf_ct_labels_ext_add(ct);
+ nfct_seqadj_ext_add(ct);
+ nfct_synproxy_ext_add(ct);
/* we must add conntrack extensions before confirmation. */
ct->status |= IPS_CONFIRMED;
static int ctnetlink_exp_dump_tuple(struct sk_buff *skb,
const struct nf_conntrack_tuple *tuple,
- enum ctattr_expect type)
+ u32 type)
{
struct nlattr *nest_parms;
{
struct nf_conntrack_tuple curr_tuple, new_tuple;
+ /* Can't setup nat info for confirmed ct. */
+ if (nf_ct_is_confirmed(ct))
+ return NF_ACCEPT;
+
NF_CT_ASSERT(maniptype == NF_NAT_MANIP_SRC ||
maniptype == NF_NAT_MANIP_DST);
BUG_ON(nf_nat_initialized(ct, maniptype));
return nf_tables_fill_setelem(args->skb, set, elem);
}
+struct nft_set_dump_ctx {
+ const struct nft_set *set;
+ struct nft_ctx ctx;
+};
+
static int nf_tables_dump_set(struct sk_buff *skb, struct netlink_callback *cb)
{
+ struct nft_set_dump_ctx *dump_ctx = cb->data;
struct net *net = sock_net(skb->sk);
- u8 genmask = nft_genmask_cur(net);
+ struct nft_af_info *afi;
+ struct nft_table *table;
struct nft_set *set;
struct nft_set_dump_args args;
- struct nft_ctx ctx;
- struct nlattr *nla[NFTA_SET_ELEM_LIST_MAX + 1];
+ bool set_found = false;
struct nfgenmsg *nfmsg;
struct nlmsghdr *nlh;
struct nlattr *nest;
u32 portid, seq;
- int event, err;
+ int event;
- err = nlmsg_parse(cb->nlh, sizeof(struct nfgenmsg), nla,
- NFTA_SET_ELEM_LIST_MAX, nft_set_elem_list_policy,
- NULL);
- if (err < 0)
- return err;
+ rcu_read_lock();
+ list_for_each_entry_rcu(afi, &net->nft.af_info, list) {
+ if (afi != dump_ctx->ctx.afi)
+ continue;
- err = nft_ctx_init_from_elemattr(&ctx, net, cb->skb, cb->nlh,
- (void *)nla, genmask);
- if (err < 0)
- return err;
+ list_for_each_entry_rcu(table, &afi->tables, list) {
+ if (table != dump_ctx->ctx.table)
+ continue;
- set = nf_tables_set_lookup(ctx.table, nla[NFTA_SET_ELEM_LIST_SET],
- genmask);
- if (IS_ERR(set))
- return PTR_ERR(set);
+ list_for_each_entry_rcu(set, &table->sets, list) {
+ if (set == dump_ctx->set) {
+ set_found = true;
+ break;
+ }
+ }
+ break;
+ }
+ break;
+ }
+
+ if (!set_found) {
+ rcu_read_unlock();
+ return -ENOENT;
+ }
event = nfnl_msg_type(NFNL_SUBSYS_NFTABLES, NFT_MSG_NEWSETELEM);
portid = NETLINK_CB(cb->skb).portid;
goto nla_put_failure;
nfmsg = nlmsg_data(nlh);
- nfmsg->nfgen_family = ctx.afi->family;
+ nfmsg->nfgen_family = afi->family;
nfmsg->version = NFNETLINK_V0;
- nfmsg->res_id = htons(ctx.net->nft.base_seq & 0xffff);
+ nfmsg->res_id = htons(net->nft.base_seq & 0xffff);
- if (nla_put_string(skb, NFTA_SET_ELEM_LIST_TABLE, ctx.table->name))
+ if (nla_put_string(skb, NFTA_SET_ELEM_LIST_TABLE, table->name))
goto nla_put_failure;
if (nla_put_string(skb, NFTA_SET_ELEM_LIST_SET, set->name))
goto nla_put_failure;
args.cb = cb;
args.skb = skb;
- args.iter.genmask = nft_genmask_cur(ctx.net);
+ args.iter.genmask = nft_genmask_cur(net);
args.iter.skip = cb->args[0];
args.iter.count = 0;
args.iter.err = 0;
args.iter.fn = nf_tables_dump_setelem;
- set->ops->walk(&ctx, set, &args.iter);
+ set->ops->walk(&dump_ctx->ctx, set, &args.iter);
+ rcu_read_unlock();
nla_nest_end(skb, nest);
nlmsg_end(skb, nlh);
return skb->len;
nla_put_failure:
+ rcu_read_unlock();
return -ENOSPC;
}
+static int nf_tables_dump_set_done(struct netlink_callback *cb)
+{
+ kfree(cb->data);
+ return 0;
+}
+
static int nf_tables_getsetelem(struct net *net, struct sock *nlsk,
struct sk_buff *skb, const struct nlmsghdr *nlh,
const struct nlattr * const nla[])
if (nlh->nlmsg_flags & NLM_F_DUMP) {
struct netlink_dump_control c = {
.dump = nf_tables_dump_set,
+ .done = nf_tables_dump_set_done,
};
+ struct nft_set_dump_ctx *dump_ctx;
+
+ dump_ctx = kmalloc(sizeof(*dump_ctx), GFP_KERNEL);
+ if (!dump_ctx)
+ return -ENOMEM;
+
+ dump_ctx->set = set;
+ dump_ctx->ctx = ctx;
+
+ c.data = dump_ctx;
return netlink_dump_start(nlsk, skb, nlh, &c);
}
return -EOPNOTSUPP;
{
struct nft_set_ext *ext = nft_set_elem_ext(set, elem);
- nft_data_uninit(nft_set_ext_key(ext), NFT_DATA_VALUE);
+ nft_data_release(nft_set_ext_key(ext), NFT_DATA_VALUE);
if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
- nft_data_uninit(nft_set_ext_data(ext), set->dtype);
+ nft_data_release(nft_set_ext_data(ext), set->dtype);
if (destroy_expr && nft_set_ext_exists(ext, NFT_SET_EXT_EXPR))
nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext));
if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
}
EXPORT_SYMBOL_GPL(nft_set_elem_destroy);
+/* Only called from commit path, nft_set_elem_deactivate() already deals with
+ * the refcounting from the preparation phase.
+ */
+static void nf_tables_set_elem_destroy(const struct nft_set *set, void *elem)
+{
+ struct nft_set_ext *ext = nft_set_elem_ext(set, elem);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR))
+ nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext));
+ kfree(elem);
+}
+
static int nft_setelem_parse_flags(const struct nft_set *set,
const struct nlattr *attr, u32 *flags)
{
kfree(elem.priv);
err3:
if (nla[NFTA_SET_ELEM_DATA] != NULL)
- nft_data_uninit(&data, d2.type);
+ nft_data_release(&data, d2.type);
err2:
- nft_data_uninit(&elem.key.val, d1.type);
+ nft_data_release(&elem.key.val, d1.type);
err1:
return err;
}
return err;
}
+/**
+ * nft_data_hold - hold a nft_data item
+ *
+ * @data: struct nft_data to release
+ * @type: type of data
+ *
+ * Hold a nft_data item. NFT_DATA_VALUE types can be silently discarded,
+ * NFT_DATA_VERDICT bumps the reference to chains in case of NFT_JUMP and
+ * NFT_GOTO verdicts. This function must be called on active data objects
+ * from the second phase of the commit protocol.
+ */
+static void nft_data_hold(const struct nft_data *data, enum nft_data_types type)
+{
+ if (type == NFT_DATA_VERDICT) {
+ switch (data->verdict.code) {
+ case NFT_JUMP:
+ case NFT_GOTO:
+ data->verdict.chain->use++;
+ break;
+ }
+ }
+}
+
+static void nft_set_elem_activate(const struct net *net,
+ const struct nft_set *set,
+ struct nft_set_elem *elem)
+{
+ const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
+ nft_data_hold(nft_set_ext_data(ext), set->dtype);
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
+ (*nft_set_ext_obj(ext))->use++;
+}
+
+static void nft_set_elem_deactivate(const struct net *net,
+ const struct nft_set *set,
+ struct nft_set_elem *elem)
+{
+ const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
+ nft_data_release(nft_set_ext_data(ext), set->dtype);
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
+ (*nft_set_ext_obj(ext))->use--;
+}
+
static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set,
const struct nlattr *attr)
{
kfree(elem.priv);
elem.priv = priv;
+ nft_set_elem_deactivate(ctx->net, set, &elem);
+
nft_trans_elem(trans) = elem;
list_add_tail(&trans->list, &ctx->net->nft.commit_list);
return 0;
err3:
kfree(elem.priv);
err2:
- nft_data_uninit(&elem.key.val, desc.type);
+ nft_data_release(&elem.key.val, desc.type);
err1:
return err;
}
nft_set_destroy(nft_trans_set(trans));
break;
case NFT_MSG_DELSETELEM:
- nft_set_elem_destroy(nft_trans_elem_set(trans),
- nft_trans_elem(trans).priv, true);
+ nf_tables_set_elem_destroy(nft_trans_elem_set(trans),
+ nft_trans_elem(trans).priv);
break;
case NFT_MSG_DELOBJ:
nft_obj_destroy(nft_trans_obj(trans));
case NFT_MSG_DELSETELEM:
te = (struct nft_trans_elem *)trans->data;
+ nft_set_elem_activate(net, te->set, &te->elem);
te->set->ops->activate(net, te->set, &te->elem);
te->set->ndeact--;
EXPORT_SYMBOL_GPL(nft_data_init);
/**
- * nft_data_uninit - release a nft_data item
+ * nft_data_release - release a nft_data item
*
* @data: struct nft_data to release
* @type: type of data
* Release a nft_data item. NFT_DATA_VALUE types can be silently discarded,
* all others need to be released by calling this function.
*/
-void nft_data_uninit(const struct nft_data *data, enum nft_data_types type)
+void nft_data_release(const struct nft_data *data, enum nft_data_types type)
{
if (type < NFT_DATA_VERDICT)
return;
WARN_ON(1);
}
}
-EXPORT_SYMBOL_GPL(nft_data_uninit);
+EXPORT_SYMBOL_GPL(nft_data_release);
int nft_data_dump(struct sk_buff *skb, int attr, const struct nft_data *data,
enum nft_data_types type, unsigned int len)
tuple_set = true;
}
+ ret = -ENOENT;
list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
cur = &nlcth->helper;
j++;
tuple.dst.protonum != cur->tuple.dst.protonum))
continue;
- found = true;
- nf_conntrack_helper_unregister(cur);
- kfree(cur->expect_policy);
+ if (refcount_dec_if_one(&cur->refcnt)) {
+ found = true;
+ nf_conntrack_helper_unregister(cur);
+ kfree(cur->expect_policy);
- list_del(&nlcth->list);
- kfree(nlcth);
+ list_del(&nlcth->list);
+ kfree(nlcth);
+ } else {
+ ret = -EBUSY;
+ }
}
/* Make sure we return success if we flush and there is no helpers */
- return (found || j == 0) ? 0 : -ENOENT;
+ return (found || j == 0) ? 0 : ret;
}
static const struct nla_policy nfnl_cthelper_policy[NFCTH_MAX+1] = {
tb[NFTA_BITWISE_MASK]);
if (err < 0)
return err;
- if (d1.len != priv->len)
- return -EINVAL;
+ if (d1.len != priv->len) {
+ err = -EINVAL;
+ goto err1;
+ }
err = nft_data_init(NULL, &priv->xor, sizeof(priv->xor), &d2,
tb[NFTA_BITWISE_XOR]);
if (err < 0)
- return err;
- if (d2.len != priv->len)
- return -EINVAL;
+ goto err1;
+ if (d2.len != priv->len) {
+ err = -EINVAL;
+ goto err2;
+ }
return 0;
+err2:
+ nft_data_release(&priv->xor, d2.type);
+err1:
+ nft_data_release(&priv->mask, d1.type);
+ return err;
}
static int nft_bitwise_dump(struct sk_buff *skb, const struct nft_expr *expr)
if (err < 0)
return ERR_PTR(err);
+ if (desc.type != NFT_DATA_VALUE) {
+ err = -EINVAL;
+ goto err1;
+ }
+
if (desc.len <= sizeof(u32) && op == NFT_CMP_EQ)
return &nft_cmp_fast_ops;
- else
- return &nft_cmp_ops;
+
+ return &nft_cmp_ops;
+err1:
+ nft_data_release(&data, desc.type);
+ return ERR_PTR(-EINVAL);
}
struct nft_expr_type nft_cmp_type __read_mostly = {
struct nft_ct_helper_obj *priv = nft_obj_data(obj);
if (priv->helper4)
- module_put(priv->helper4->me);
+ nf_conntrack_helper_put(priv->helper4);
if (priv->helper6)
- module_put(priv->helper6->me);
+ nf_conntrack_helper_put(priv->helper6);
}
static void nft_ct_helper_obj_eval(struct nft_object *obj,
return 0;
err1:
- nft_data_uninit(&priv->data, desc.type);
+ nft_data_release(&priv->data, desc.type);
return err;
}
const struct nft_expr *expr)
{
const struct nft_immediate_expr *priv = nft_expr_priv(expr);
- return nft_data_uninit(&priv->data, nft_dreg_to_type(priv->dreg));
+
+ return nft_data_release(&priv->data, nft_dreg_to_type(priv->dreg));
}
static int nft_immediate_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->len = desc_from.len;
return 0;
err2:
- nft_data_uninit(&priv->data_to, desc_to.type);
+ nft_data_release(&priv->data_to, desc_to.type);
err1:
- nft_data_uninit(&priv->data_from, desc_from.type);
+ nft_data_release(&priv->data_from, desc_from.type);
return err;
}
struct nft_set_elem elem;
int err;
- err = rhashtable_walk_init(&priv->ht, &hti, GFP_KERNEL);
+ err = rhashtable_walk_init(&priv->ht, &hti, GFP_ATOMIC);
iter->err = err;
if (err)
return;
&U->u.user.revision, K->u.kernel.TYPE->revision)
int xt_data_to_user(void __user *dst, const void *src,
- int usersize, int size)
+ int usersize, int size, int aligned_size)
{
usersize = usersize ? : size;
if (copy_to_user(dst, src, usersize))
return -EFAULT;
- if (usersize != size && clear_user(dst + usersize, size - usersize))
+ if (usersize != aligned_size &&
+ clear_user(dst + usersize, aligned_size - usersize))
return -EFAULT;
return 0;
}
EXPORT_SYMBOL_GPL(xt_data_to_user);
-#define XT_DATA_TO_USER(U, K, TYPE, C_SIZE) \
+#define XT_DATA_TO_USER(U, K, TYPE) \
xt_data_to_user(U->data, K->data, \
K->u.kernel.TYPE->usersize, \
- C_SIZE ? : K->u.kernel.TYPE->TYPE##size)
+ K->u.kernel.TYPE->TYPE##size, \
+ XT_ALIGN(K->u.kernel.TYPE->TYPE##size))
int xt_match_to_user(const struct xt_entry_match *m,
struct xt_entry_match __user *u)
{
return XT_OBJ_TO_USER(u, m, match, 0) ||
- XT_DATA_TO_USER(u, m, match, 0);
+ XT_DATA_TO_USER(u, m, match);
}
EXPORT_SYMBOL_GPL(xt_match_to_user);
struct xt_entry_target __user *u)
{
return XT_OBJ_TO_USER(u, t, target, 0) ||
- XT_DATA_TO_USER(u, t, target, 0);
+ XT_DATA_TO_USER(u, t, target);
}
EXPORT_SYMBOL_GPL(xt_target_to_user);
}
EXPORT_SYMBOL_GPL(xt_compat_match_from_user);
+#define COMPAT_XT_DATA_TO_USER(U, K, TYPE, C_SIZE) \
+ xt_data_to_user(U->data, K->data, \
+ K->u.kernel.TYPE->usersize, \
+ C_SIZE, \
+ COMPAT_XT_ALIGN(C_SIZE))
+
int xt_compat_match_to_user(const struct xt_entry_match *m,
void __user **dstptr, unsigned int *size)
{
if (match->compat_to_user((void __user *)cm->data, m->data))
return -EFAULT;
} else {
- if (XT_DATA_TO_USER(cm, m, match, msize - sizeof(*cm)))
+ if (COMPAT_XT_DATA_TO_USER(cm, m, match, msize - sizeof(*cm)))
return -EFAULT;
}
if (target->compat_to_user((void __user *)ct->data, t->data))
return -EFAULT;
} else {
- if (XT_DATA_TO_USER(ct, t, target, tsize - sizeof(*ct)))
+ if (COMPAT_XT_DATA_TO_USER(ct, t, target, tsize - sizeof(*ct)))
return -EFAULT;
}
help = nf_ct_helper_ext_add(ct, helper, GFP_KERNEL);
if (help == NULL) {
- module_put(helper->me);
+ nf_conntrack_helper_put(helper);
return -ENOMEM;
}
err4:
help = nfct_help(ct);
if (help)
- module_put(help->helper->me);
+ nf_conntrack_helper_put(help->helper);
err3:
nf_ct_tmpl_free(ct);
err2:
if (ct) {
help = nfct_help(ct);
if (help)
- module_put(help->helper->me);
+ nf_conntrack_helper_put(help->helper);
nf_ct_netns_put(par->net, par->family);
help = nf_ct_helper_ext_add(info->ct, helper, GFP_KERNEL);
if (!help) {
- module_put(helper->me);
+ nf_conntrack_helper_put(helper);
return -ENOMEM;
}
static void __ovs_ct_free_action(struct ovs_conntrack_info *ct_info)
{
if (ct_info->helper)
- module_put(ct_info->helper->me);
+ nf_conntrack_helper_put(ct_info->helper);
if (ct_info->ct)
nf_ct_tmpl_free(ct_info->ct);
}
*arg = (unsigned long) head;
rcu_assign_pointer(tp->root, new);
- call_rcu(&head->rcu, mall_destroy_rcu);
return 0;
err_replace_hw_filter:
asoc->ctsn_ack_point = asoc->next_tsn - 1;
asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
- if (!asoc->stream) {
+
+ if (sctp_state(asoc, COOKIE_WAIT)) {
+ sctp_stream_free(asoc->stream);
asoc->stream = new->stream;
new->stream = NULL;
}
struct sctp_association **app,
struct sctp_transport **tpp)
{
+ struct sctp_init_chunk *chunkhdr, _chunkhdr;
union sctp_addr saddr;
union sctp_addr daddr;
struct sctp_af *af;
struct sock *sk = NULL;
struct sctp_association *asoc;
struct sctp_transport *transport = NULL;
- struct sctp_init_chunk *chunkhdr;
__u32 vtag = ntohl(sctphdr->vtag);
- int len = skb->len - ((void *)sctphdr - (void *)skb->data);
*app = NULL; *tpp = NULL;
* discard the packet.
*/
if (vtag == 0) {
- chunkhdr = (void *)sctphdr + sizeof(struct sctphdr);
- if (len < sizeof(struct sctphdr) + sizeof(sctp_chunkhdr_t)
- + sizeof(__be32) ||
+ /* chunk header + first 4 octects of init header */
+ chunkhdr = skb_header_pointer(skb, skb_transport_offset(skb) +
+ sizeof(struct sctphdr),
+ sizeof(struct sctp_chunkhdr) +
+ sizeof(__be32), &_chunkhdr);
+ if (!chunkhdr ||
chunkhdr->chunk_hdr.type != SCTP_CID_INIT ||
- ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag) {
+ ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag)
goto out;
- }
+
} else if (vtag != asoc->c.peer_vtag) {
goto out;
}
* stream sequence number shall be set to 0.
*/
- /* Allocate storage for the negotiated streams if it is not a temporary
- * association.
- */
- if (!asoc->temp) {
- if (sctp_stream_init(asoc, gfp))
- goto clean_up;
+ if (sctp_stream_init(asoc, gfp))
+ goto clean_up;
- if (sctp_assoc_set_id(asoc, gfp))
- goto clean_up;
- }
+ if (!asoc->temp && sctp_assoc_set_id(asoc, gfp))
+ goto clean_up;
/* ADDIP Section 4.1 ASCONF Chunk Procedures
*
}
}
+ /* Set temp so that it won't be added into hashtable */
+ new_asoc->temp = 1;
+
/* Compare the tie_tag in cookie with the verification tag of
* current association.
*/
long timeout;
int err;
struct vsock_transport_send_notify_data send_data;
-
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
sk = sock->sk;
vsk = vsock_sk(sk);
if (err < 0)
goto out;
-
while (total_written < len) {
ssize_t written;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+ add_wait_queue(sk_sleep(sk), &wait);
while (vsock_stream_has_space(vsk) == 0 &&
sk->sk_err == 0 &&
!(sk->sk_shutdown & SEND_SHUTDOWN) &&
/* Don't wait for non-blocking sockets. */
if (timeout == 0) {
err = -EAGAIN;
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
err = transport->notify_send_pre_block(vsk, &send_data);
if (err < 0) {
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
release_sock(sk);
- timeout = schedule_timeout(timeout);
+ timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout);
lock_sock(sk);
if (signal_pending(current)) {
err = sock_intr_errno(timeout);
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
} else if (timeout == 0) {
err = -EAGAIN;
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
-
- prepare_to_wait(sk_sleep(sk), &wait,
- TASK_INTERRUPTIBLE);
}
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
/* These checks occur both as part of and after the loop
* conditional since we need to check before and after
{
struct cfg80211_sched_scan_request *pos;
- ASSERT_RTNL();
+ WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held());
- list_for_each_entry(pos, &rdev->sched_scan_req_list, list) {
+ list_for_each_entry_rcu(pos, &rdev->sched_scan_req_list, list) {
if (pos->reqid == reqid)
return pos;
}
trace_cfg80211_sched_scan_results(wiphy, reqid);
/* ignore if we're not scanning */
- rtnl_lock();
+ rcu_read_lock();
request = cfg80211_find_sched_scan_req(rdev, reqid);
if (request) {
request->report_results = true;
queue_work(cfg80211_wq, &rdev->sched_scan_res_wk);
}
- rtnl_unlock();
+ rcu_read_unlock();
}
EXPORT_SYMBOL(cfg80211_sched_scan_results);
if (iftype == NL80211_IFTYPE_MESH_POINT)
skb_copy_bits(skb, hdrlen, &mesh_flags, 1);
+ mesh_flags &= MESH_FLAGS_AE;
+
switch (hdr->frame_control &
cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
case cpu_to_le16(IEEE80211_FCTL_TODS):
iftype != NL80211_IFTYPE_STATION))
return -1;
if (iftype == NL80211_IFTYPE_MESH_POINT) {
- if (mesh_flags & MESH_FLAGS_AE_A4)
+ if (mesh_flags == MESH_FLAGS_AE_A4)
return -1;
- if (mesh_flags & MESH_FLAGS_AE_A5_A6) {
+ if (mesh_flags == MESH_FLAGS_AE_A5_A6) {
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
tmp.h_dest, 2 * ETH_ALEN);
ether_addr_equal(tmp.h_source, addr)))
return -1;
if (iftype == NL80211_IFTYPE_MESH_POINT) {
- if (mesh_flags & MESH_FLAGS_AE_A5_A6)
+ if (mesh_flags == MESH_FLAGS_AE_A5_A6)
return -1;
- if (mesh_flags & MESH_FLAGS_AE_A4)
+ if (mesh_flags == MESH_FLAGS_AE_A4)
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
tmp.h_source, ETH_ALEN);
static int xfrm_dev_down(struct net_device *dev)
{
- if (dev->hw_features & NETIF_F_HW_ESP)
+ if (dev->features & NETIF_F_HW_ESP)
xfrm_dev_state_flush(dev_net(dev), dev, true);
xfrm_garbage_collect(dev_net(dev));
goto out;
}
-#ifdef CONFIG_XFRM_SUB_POLICY
-static int xfrm_dst_alloc_copy(void **target, const void *src, int size)
-{
- if (!*target) {
- *target = kmalloc(size, GFP_ATOMIC);
- if (!*target)
- return -ENOMEM;
- }
-
- memcpy(*target, src, size);
- return 0;
-}
-#endif
-
-static int xfrm_dst_update_parent(struct dst_entry *dst,
- const struct xfrm_selector *sel)
-{
-#ifdef CONFIG_XFRM_SUB_POLICY
- struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
- return xfrm_dst_alloc_copy((void **)&(xdst->partner),
- sel, sizeof(*sel));
-#else
- return 0;
-#endif
-}
-
-static int xfrm_dst_update_origin(struct dst_entry *dst,
- const struct flowi *fl)
-{
-#ifdef CONFIG_XFRM_SUB_POLICY
- struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
- return xfrm_dst_alloc_copy((void **)&(xdst->origin), fl, sizeof(*fl));
-#else
- return 0;
-#endif
-}
-
static int xfrm_expand_policies(const struct flowi *fl, u16 family,
struct xfrm_policy **pols,
int *num_pols, int *num_xfrms)
xdst = (struct xfrm_dst *)dst;
xdst->num_xfrms = err;
- if (num_pols > 1)
- err = xfrm_dst_update_parent(dst, &pols[1]->selector);
- else
- err = xfrm_dst_update_origin(dst, fl);
- if (unlikely(err)) {
- dst_free(dst);
- XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
- return ERR_PTR(err);
- }
-
xdst->num_pols = num_pols;
memcpy(xdst->pols, pols, sizeof(struct xfrm_policy *) * num_pols);
xdst->policy_genid = atomic_read(&pols[0]->genid);
x->curlft.add_time = orig->curlft.add_time;
x->km.state = orig->km.state;
x->km.seq = orig->km.seq;
+ x->replay = orig->replay;
+ x->preplay = orig->preplay;
return x;
SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
+ SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
{.id = ALC883_FIXUP_ACER_EAPD, .name = "acer-aspire"},
{.id = ALC882_FIXUP_INV_DMIC, .name = "inv-dmic"},
{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
+ {.id = ALC1220_FIXUP_GB_DUAL_CODECS, .name = "dual-codecs"},
{}
};
{.id = ALC292_FIXUP_TPT440_DOCK, .name = "tpt440-dock"},
{.id = ALC292_FIXUP_TPT440, .name = "tpt440"},
{.id = ALC292_FIXUP_TPT460, .name = "tpt460"},
+ {.id = ALC233_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
{}
};
#define ALC225_STANDARD_PINS \
break;
case 0x10ec0225:
case 0x10ec0295:
+ spec->codec_variant = ALC269_TYPE_ALC225;
+ break;
case 0x10ec0299:
spec->codec_variant = ALC269_TYPE_ALC225;
+ spec->gen.mixer_nid = 0; /* no loopback on ALC299 */
break;
case 0x10ec0234:
case 0x10ec0274:
{.id = ALC662_FIXUP_ASUS_MODE8, .name = "asus-mode8"},
{.id = ALC662_FIXUP_INV_DMIC, .name = "inv-dmic"},
{.id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
+ {.id = ALC662_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
{}
};
"Dell Inspiron 1501", STAC_9200_DELL_M26),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f6,
"unknown Dell", STAC_9200_DELL_M26),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0201,
+ "Dell Latitude D430", STAC_9200_DELL_M22),
/* Panasonic */
SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_9200_PANASONIC),
/* Gateway machines needs EAPD to be set on resume */
/* Amanero Combo384 USB interface with native DSD support */
case USB_ID(0x16d0, 0x071a):
if (fp->altsetting == 2) {
- switch (chip->dev->descriptor.bcdDevice) {
+ switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) {
case 0x199:
return SNDRV_PCM_FMTBIT_DSD_U32_LE;
case 0x19b:
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
};
struct kvm_sync_regs {
+ /* Used with KVM_CAP_ARM_USER_IRQ */
+ __u64 device_irq_level;
};
struct kvm_arch_memory_slot {
#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7
+#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
-#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
+#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
+#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
+#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
+#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_TYPE_SHIFT 24
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
#define KVM_GUESTDBG_USE_HW (1 << 17)
struct kvm_sync_regs {
+ /* Used with KVM_CAP_ARM_USER_IRQ */
+ __u64 device_irq_level;
};
struct kvm_arch_memory_slot {
#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7
+#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
-#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
+#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
+#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
+#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
+#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
/* Device Control API on vcpu fd */
#define KVM_ARM_VCPU_PMU_V3_CTRL 0
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_GUEST_DEBUG
+/* Not always available, but if it is, this is the correct offset. */
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
struct kvm_regs {
__u64 pc;
__u64 cr;
#define KVM_DEV_FLIC_ADAPTER_REGISTER 6
#define KVM_DEV_FLIC_ADAPTER_MODIFY 7
#define KVM_DEV_FLIC_CLEAR_IO_IRQ 8
+#define KVM_DEV_FLIC_AISM 9
+#define KVM_DEV_FLIC_AIRQ_INJECT 10
/*
* We can have up to 4*64k pending subchannels + 8 adapter interrupts,
* as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
__u8 isc;
__u8 maskable;
__u8 swap;
- __u8 pad;
+ __u8 flags;
+};
+
+#define KVM_S390_ADAPTER_SUPPRESSIBLE 0x01
+
+struct kvm_s390_ais_req {
+ __u8 isc;
+ __u16 mode;
};
#define KVM_S390_IO_ADAPTER_MASK 1
#define KVM_S390_VM_CPU_FEAT_CMMA 10
#define KVM_S390_VM_CPU_FEAT_PFMFI 11
#define KVM_S390_VM_CPU_FEAT_SIGPIF 12
+#define KVM_S390_VM_CPU_FEAT_KSS 13
struct kvm_s390_vm_cpu_feat {
__u64 feat[16];
};
#define KVM_SYNC_VRS (1UL << 6)
#define KVM_SYNC_RICCB (1UL << 7)
#define KVM_SYNC_FPRS (1UL << 8)
+#define KVM_SYNC_GSCB (1UL << 9)
+/* length and alignment of the sdnx as a power of two */
+#define SDNXC 8
+#define SDNXL (1UL << SDNXC)
/* definition of registers in kvm_run */
struct kvm_sync_regs {
__u64 prefix; /* prefix register */
};
__u8 reserved[512]; /* for future vector expansion */
__u32 fpc; /* valid on KVM_SYNC_VRS or KVM_SYNC_FPRS */
- __u8 padding[52]; /* riccb needs to be 64byte aligned */
+ __u8 padding1[52]; /* riccb needs to be 64byte aligned */
__u8 riccb[64]; /* runtime instrumentation controls block */
+ __u8 padding2[192]; /* sdnx needs to be 256byte aligned */
+ union {
+ __u8 sdnx[SDNXL]; /* state description annex */
+ struct {
+ __u64 reserved1[2];
+ __u64 gscb[4];
+ };
+ };
};
#define KVM_REG_S390_TODPR (KVM_REG_S390 | KVM_REG_SIZE_U32 | 0x1)
#define X86_FEATURE_AVX512_4VNNIW (7*32+16) /* AVX-512 Neural Network Instructions */
#define X86_FEATURE_AVX512_4FMAPS (7*32+17) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_MBA ( 7*32+18) /* Memory Bandwidth Allocation */
+
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */
#define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */
# define DISABLE_OSPKE (1<<(X86_FEATURE_OSPKE & 31))
#endif /* CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS */
+#ifdef CONFIG_X86_5LEVEL
+# define DISABLE_LA57 0
+#else
+# define DISABLE_LA57 (1<<(X86_FEATURE_LA57 & 31))
+#endif
+
/*
* Make sure to add features to the correct mask
*/
#define DISABLED_MASK13 0
#define DISABLED_MASK14 0
#define DISABLED_MASK15 0
-#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE)
+#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57)
#define DISABLED_MASK17 0
#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 18)
# define NEED_MOVBE 0
#endif
+#ifdef CONFIG_X86_5LEVEL
+# define NEED_LA57 (1<<(X86_FEATURE_LA57 & 31))
+#else
+# define NEED_LA57 0
+#endif
+
#ifdef CONFIG_X86_64
#ifdef CONFIG_PARAVIRT
/* Paravirtualized systems may not have PSE or PGE available */
#define REQUIRED_MASK13 0
#define REQUIRED_MASK14 0
#define REQUIRED_MASK15 0
-#define REQUIRED_MASK16 0
+#define REQUIRED_MASK16 (NEED_LA57)
#define REQUIRED_MASK17 0
#define REQUIRED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 18)
#include <linux/types.h>
#include <linux/ioctl.h>
+#define KVM_PIO_PAGE_OFFSET 1
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
+
#define DE_VECTOR 0
#define DB_VECTOR 1
#define BP_VECTOR 3
#define EXIT_REASON_WBINVD 54
#define EXIT_REASON_XSETBV 55
#define EXIT_REASON_APIC_WRITE 56
+#define EXIT_REASON_RDRAND 57
#define EXIT_REASON_INVPCID 58
+#define EXIT_REASON_VMFUNC 59
+#define EXIT_REASON_ENCLS 60
+#define EXIT_REASON_RDSEED 61
#define EXIT_REASON_PML_FULL 62
#define EXIT_REASON_XSAVES 63
#define EXIT_REASON_XRSTORS 64
{ EXIT_REASON_TASK_SWITCH, "TASK_SWITCH" }, \
{ EXIT_REASON_CPUID, "CPUID" }, \
{ EXIT_REASON_HLT, "HLT" }, \
+ { EXIT_REASON_INVD, "INVD" }, \
{ EXIT_REASON_INVLPG, "INVLPG" }, \
{ EXIT_REASON_RDPMC, "RDPMC" }, \
{ EXIT_REASON_RDTSC, "RDTSC" }, \
{ EXIT_REASON_IO_INSTRUCTION, "IO_INSTRUCTION" }, \
{ EXIT_REASON_MSR_READ, "MSR_READ" }, \
{ EXIT_REASON_MSR_WRITE, "MSR_WRITE" }, \
+ { EXIT_REASON_INVALID_STATE, "INVALID_STATE" }, \
+ { EXIT_REASON_MSR_LOAD_FAIL, "MSR_LOAD_FAIL" }, \
{ EXIT_REASON_MWAIT_INSTRUCTION, "MWAIT_INSTRUCTION" }, \
{ EXIT_REASON_MONITOR_TRAP_FLAG, "MONITOR_TRAP_FLAG" }, \
{ EXIT_REASON_MONITOR_INSTRUCTION, "MONITOR_INSTRUCTION" }, \
{ EXIT_REASON_MCE_DURING_VMENTRY, "MCE_DURING_VMENTRY" }, \
{ EXIT_REASON_TPR_BELOW_THRESHOLD, "TPR_BELOW_THRESHOLD" }, \
{ EXIT_REASON_APIC_ACCESS, "APIC_ACCESS" }, \
- { EXIT_REASON_GDTR_IDTR, "GDTR_IDTR" }, \
- { EXIT_REASON_LDTR_TR, "LDTR_TR" }, \
+ { EXIT_REASON_EOI_INDUCED, "EOI_INDUCED" }, \
+ { EXIT_REASON_GDTR_IDTR, "GDTR_IDTR" }, \
+ { EXIT_REASON_LDTR_TR, "LDTR_TR" }, \
{ EXIT_REASON_EPT_VIOLATION, "EPT_VIOLATION" }, \
{ EXIT_REASON_EPT_MISCONFIG, "EPT_MISCONFIG" }, \
{ EXIT_REASON_INVEPT, "INVEPT" }, \
+ { EXIT_REASON_RDTSCP, "RDTSCP" }, \
{ EXIT_REASON_PREEMPTION_TIMER, "PREEMPTION_TIMER" }, \
+ { EXIT_REASON_INVVPID, "INVVPID" }, \
{ EXIT_REASON_WBINVD, "WBINVD" }, \
+ { EXIT_REASON_XSETBV, "XSETBV" }, \
{ EXIT_REASON_APIC_WRITE, "APIC_WRITE" }, \
- { EXIT_REASON_EOI_INDUCED, "EOI_INDUCED" }, \
- { EXIT_REASON_INVALID_STATE, "INVALID_STATE" }, \
- { EXIT_REASON_MSR_LOAD_FAIL, "MSR_LOAD_FAIL" }, \
- { EXIT_REASON_INVD, "INVD" }, \
- { EXIT_REASON_INVVPID, "INVVPID" }, \
+ { EXIT_REASON_RDRAND, "RDRAND" }, \
{ EXIT_REASON_INVPCID, "INVPCID" }, \
+ { EXIT_REASON_VMFUNC, "VMFUNC" }, \
+ { EXIT_REASON_ENCLS, "ENCLS" }, \
+ { EXIT_REASON_RDSEED, "RDSEED" }, \
+ { EXIT_REASON_PML_FULL, "PML_FULL" }, \
{ EXIT_REASON_XSAVES, "XSAVES" }, \
{ EXIT_REASON_XRSTORS, "XRSTORS" }
.off = OFF, \
.imm = IMM })
+/* Unconditional jumps, goto pc + off16 */
+
+#define BPF_JMP_A(OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP | BPF_JA, \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = OFF, \
+ .imm = 0 })
+
/* Function call */
#define BPF_EMIT_CALL(FUNC) \
* tv_sec holds the number of seconds before (negative) or after (positive)
* 00:00:00 1st January 1970 UTC.
*
- * tv_nsec holds a number of nanoseconds before (0..-999,999,999 if tv_sec is
- * negative) or after (0..999,999,999 if tv_sec is positive) the tv_sec time.
- *
- * Note that if both tv_sec and tv_nsec are non-zero, then the two values must
- * either be both positive or both negative.
+ * tv_nsec holds a number of nanoseconds (0..999,999,999) after the tv_sec time.
*
* __reserved is held in case we need a yet finer resolution.
*/
struct statx_timestamp {
__s64 tv_sec;
- __s32 tv_nsec;
+ __u32 tv_nsec;
__s32 __reserved;
};
Set the maximum number of program blocks to print with brstackasm for
each sample.
+--inline::
+ If a callgraph address belongs to an inlined function, the inline stack
+ will be printed. Each entry has function name and file/line.
+
SEE ALSO
--------
linkperf:perf-record[1], linkperf:perf-script-perl[1],
"Enable kernel symbol demangling"),
OPT_STRING(0, "time", &script.time_str, "str",
"Time span of interest (start,stop)"),
+ OPT_BOOLEAN(0, "inline", &symbol_conf.inline_name,
+ "Show inline function"),
OPT_END()
};
const char * const script_subcommands[] = { "record", "report", NULL };
return 0;
ret = b->callchain->max_depth - a->callchain->max_depth;
+ if (callchain_param.order == ORDER_CALLER)
+ ret = -ret;
}
return ret;
}
static enum match_result match_chain_srcline(struct callchain_cursor_node *node,
struct callchain_list *cnode)
{
- char *left = get_srcline(cnode->ms.map->dso,
+ char *left = NULL;
+ char *right = NULL;
+ enum match_result ret = MATCH_EQ;
+ int cmp;
+
+ if (cnode->ms.map)
+ left = get_srcline(cnode->ms.map->dso,
map__rip_2objdump(cnode->ms.map, cnode->ip),
cnode->ms.sym, true, false);
- char *right = get_srcline(node->map->dso,
+ if (node->map)
+ right = get_srcline(node->map->dso,
map__rip_2objdump(node->map, node->ip),
node->sym, true, false);
- enum match_result ret = MATCH_EQ;
- int cmp;
if (left && right)
cmp = strcmp(left, right);
#include "map.h"
#include "strlist.h"
#include "symbol.h"
+#include "srcline.h"
static int comma_fprintf(FILE *fp, bool *first, const char *fmt, ...)
{
if (!print_oneline)
printed += fprintf(fp, "\n");
+ if (symbol_conf.inline_name && node->map) {
+ struct inline_node *inode;
+
+ addr = map__rip_2objdump(node->map, node->ip),
+ inode = dso__parse_addr_inlines(node->map->dso, addr);
+
+ if (inode) {
+ struct inline_list *ilist;
+
+ list_for_each_entry(ilist, &inode->val, list) {
+ if (print_arrow)
+ printed += fprintf(fp, " <-");
+
+ /* IP is same, just skip it */
+ if (print_ip)
+ printed += fprintf(fp, "%c%16s",
+ s, "");
+ if (print_sym)
+ printed += fprintf(fp, " %s",
+ ilist->funcname);
+ if (print_srcline)
+ printed += fprintf(fp, "\n %s:%d",
+ ilist->filename,
+ ilist->line_nr);
+ if (!print_oneline)
+ printed += fprintf(fp, "\n");
+ }
+
+ inline_node__delete(inode);
+ }
+ }
+
if (symbol_conf.bt_stop_list &&
node->sym &&
strlist__has_entry(symbol_conf.bt_stop_list,
}
}
- list_add_tail(&ilist->list, &node->val);
+ if (callchain_param.order == ORDER_CALLEE)
+ list_add_tail(&ilist->list, &node->val);
+ else
+ list_add(&ilist->list, &node->val);
return 0;
}
#define MAX_INLINE_NEST 1024
-static void inline_list__reverse(struct inline_node *node)
+static int inline_list__append_dso_a2l(struct dso *dso,
+ struct inline_node *node)
{
- struct inline_list *ilist, *n;
+ struct a2l_data *a2l = dso->a2l;
+ char *funcname = a2l->funcname ? strdup(a2l->funcname) : NULL;
+ char *filename = a2l->filename ? strdup(a2l->filename) : NULL;
- list_for_each_entry_safe_reverse(ilist, n, &node->val, list)
- list_move_tail(&ilist->list, &node->val);
+ return inline_list__append(filename, funcname, a2l->line, node, dso);
}
static int addr2line(const char *dso_name, u64 addr,
bfd_map_over_sections(a2l->abfd, find_address_in_section, a2l);
- if (a2l->found && unwind_inlines) {
+ if (!a2l->found)
+ return 0;
+
+ if (unwind_inlines) {
int cnt = 0;
+ if (node && inline_list__append_dso_a2l(dso, node))
+ return 0;
+
while (bfd_find_inliner_info(a2l->abfd, &a2l->filename,
&a2l->funcname, &a2l->line) &&
cnt++ < MAX_INLINE_NEST) {
if (node != NULL) {
- if (inline_list__append(strdup(a2l->filename),
- strdup(a2l->funcname),
- a2l->line, node,
- dso) != 0)
+ if (inline_list__append_dso_a2l(dso, node))
return 0;
+ // found at least one inline frame
+ ret = 1;
}
}
+ }
- if ((node != NULL) &&
- (callchain_param.order != ORDER_CALLEE)) {
- inline_list__reverse(node);
- }
+ if (file) {
+ *file = a2l->filename ? strdup(a2l->filename) : NULL;
+ ret = *file ? 1 : 0;
}
- if (a2l->found && a2l->filename) {
- *file = strdup(a2l->filename);
+ if (line)
*line = a2l->line;
- if (*file)
- ret = 1;
- }
-
return ret;
}
static struct inline_node *addr2inlines(const char *dso_name, u64 addr,
struct dso *dso)
{
- char *file = NULL;
- unsigned int line = 0;
struct inline_node *node;
node = zalloc(sizeof(*node));
INIT_LIST_HEAD(&node->val);
node->addr = addr;
- if (!addr2line(dso_name, addr, &file, &line, dso, TRUE, node))
+ if (!addr2line(dso_name, addr, NULL, NULL, dso, TRUE, node))
goto out_free_inline_node;
if (list_empty(&node->val))
{
struct unwind_info *ui = arg;
Dwarf_Addr pc;
+ bool isactivation;
- if (!dwfl_frame_pc(state, &pc, NULL)) {
+ if (!dwfl_frame_pc(state, &pc, &isactivation)) {
pr_err("%s", dwfl_errmsg(-1));
return DWARF_CB_ABORT;
}
+ if (!isactivation)
+ --pc;
+
return entry(pc, ui) || !(--ui->max_stack) ?
DWARF_CB_ABORT : DWARF_CB_OK;
}
while (!ret && (unw_step(&c) > 0) && i < max_stack) {
unw_get_reg(&c, UNW_REG_IP, &ips[i]);
+
+ /*
+ * Decrement the IP for any non-activation frames.
+ * this is required to properly find the srcline
+ * for caller frames.
+ * See also the documentation for dwfl_frame_pc(),
+ * which this code tries to replicate.
+ */
+ if (unw_is_signal_frame(&c) <= 0)
+ --ips[i];
+
++i;
}
--- /dev/null
+acpidbg
+acpidump
+ec
+include
#define MAX_NR_MAPS 4
#define F_NEEDS_EFFICIENT_UNALIGNED_ACCESS (1 << 0)
+#define F_LOAD_WITH_STRICT_ALIGNMENT (1 << 1)
struct bpf_test {
const char *descr;
.result = REJECT,
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
},
+ {
+ "direct packet access: test17 (pruning, alignment)",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct __sk_buff, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct __sk_buff, data_end)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_1,
+ offsetof(struct __sk_buff, mark)),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 14),
+ BPF_JMP_IMM(BPF_JGT, BPF_REG_7, 1, 4),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1),
+ BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, -4),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 1),
+ BPF_JMP_A(-6),
+ },
+ .errstr = "misaligned packet access off 2+15+-4 size 4",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .flags = F_LOAD_WITH_STRICT_ALIGNMENT,
+ },
{
"helper access to packet: test1, valid packet_ptr range",
.insns = {
.result = ACCEPT,
.prog_type = BPF_PROG_TYPE_SCHED_CLS
},
+ {
+ "alu ops on ptr_to_map_value_or_null, 1",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_1, 10),
+ BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1, -8),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_0),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, -2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 2),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+ BPF_ST_MEM(BPF_DW, BPF_REG_4, 0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 4 },
+ .errstr = "R4 invalid mem access",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS
+ },
+ {
+ "alu ops on ptr_to_map_value_or_null, 2",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_1, 10),
+ BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1, -8),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_0),
+ BPF_ALU64_IMM(BPF_AND, BPF_REG_4, -1),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+ BPF_ST_MEM(BPF_DW, BPF_REG_4, 0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 4 },
+ .errstr = "R4 invalid mem access",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS
+ },
+ {
+ "alu ops on ptr_to_map_value_or_null, 3",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_1, 10),
+ BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1, -8),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_0),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_4, 1),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+ BPF_ST_MEM(BPF_DW, BPF_REG_4, 0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 4 },
+ .errstr = "R4 invalid mem access",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS
+ },
{
"invalid memory access with multiple map_lookup_elem calls",
.insns = {
.fixup_map_in_map = { 3 },
.errstr = "R1 type=map_value_or_null expected=map_ptr",
.result = REJECT,
- }
+ },
+ {
+ "ld_abs: check calling conv, r1",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_1, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_abs: check calling conv, r2",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_2, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R2 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_abs: check calling conv, r3",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_3, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_3),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R3 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_abs: check calling conv, r4",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_4, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_4),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R4 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_abs: check calling conv, r5",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_5, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_5),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R5 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_abs: check calling conv, r7",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_7, 0),
+ BPF_LD_ABS(BPF_W, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_7),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ },
+ {
+ "ld_ind: check calling conv, r1",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_1, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_1, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_ind: check calling conv, r2",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_2, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_2, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R2 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_ind: check calling conv, r3",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_3, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_3, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_3),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R3 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_ind: check calling conv, r4",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_4, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_4, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_4),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R4 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_ind: check calling conv, r5",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_5, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_5, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_5),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R5 !read_ok",
+ .result = REJECT,
+ },
+ {
+ "ld_ind: check calling conv, r7",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_MOV64_IMM(BPF_REG_7, 1),
+ BPF_LD_IND(BPF_W, BPF_REG_7, -0x200000),
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_7),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ },
};
static int probe_filter_length(const struct bpf_insn *fp)
do_test_fixup(test, prog, map_fds);
- fd_prog = bpf_load_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
- prog, prog_len, "GPL", 0, bpf_vlog,
- sizeof(bpf_vlog));
+ fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
+ prog, prog_len, test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
+ "GPL", 0, bpf_vlog, sizeof(bpf_vlog));
expected_ret = unpriv && test->result_unpriv != UNDEF ?
test->result_unpriv : test->result;
--- /dev/null
+#!/bin/sh
+# description: Register/unregister many kprobe events
+
+# ftrace fentry skip size depends on the machine architecture.
+# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc
+case `uname -m` in
+ x86_64|i[3456]86) OFFS=5;;
+ ppc*) OFFS=4;;
+ *) OFFS=0;;
+esac
+
+echo "Setup up to 256 kprobes"
+grep t /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
+head -n 256 | while read i; do echo p ${i}+${OFFS} ; done > kprobe_events ||:
+
+echo 1 > events/kprobes/enable
+echo 0 > events/kprobes/enable
+echo > kprobe_events
+echo "Waiting for unoptimizing & freeing"
+sleep 5
+echo "Done"
printf("Check DSCR TM context switch: ");
fflush(stdout);
for (;;) {
- rv = 1;
asm __volatile__ (
/* set a known value into the DSCR */
"ld 3, %[dscr1];"
"mtspr %[sprn_dscr], 3;"
+ "li %[rv], 1;"
/* start and suspend a transaction */
"tbegin.;"
"beq 1f;"
projects / karo-tx-linux.git / commitdiff