i.MX6sx enet has below clocks for user config:
clk_ipg: ipg_clk_s, ipg_clk_mac0_s, 66Mhz
clk_ahb: enet system clock, it is enet AXI clock for imx6sx.
For imx6sx, it alos is the clock source of interrupt coalescing.
The clock range: 200Mhz ~ 266Mhz.
clk_ref: refrence clock for tx and rx. For imx6sx enet RGMII mode,
the refrence clock is 125Mhz coming from internal PLL or external.
In i.MX6sx-arm2 board, the clock is from internal PLL.
clk_ref is optional, depends on board.
clk_enet_out: The clock can be output from internal PLL. It can supply 50Mhz
clock for phy. clk_enet_out is optional, depends on chip and board.
clk_ptp: 1588 ts clock. It is optional, depends on chip.
The patch add clk_ref to distiguish the different clocks.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct clk *clk_ipg;
struct clk *clk_ahb;
+ struct clk *clk_ref;
struct clk *clk_enet_out;
struct clk *clk_ptp;
}
mutex_unlock(&fep->ptp_clk_mutex);
}
+ if (fep->clk_ref) {
+ ret = clk_prepare_enable(fep->clk_ref);
+ if (ret)
+ goto failed_clk_ref;
+ }
} else {
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
fep->ptp_clk_on = false;
mutex_unlock(&fep->ptp_clk_mutex);
}
+ if (fep->clk_ref)
+ clk_disable_unprepare(fep->clk_ref);
}
return 0;
+
+failed_clk_ref:
+ if (fep->clk_ref)
+ clk_disable_unprepare(fep->clk_ref);
failed_clk_ptp:
if (fep->clk_enet_out)
clk_disable_unprepare(fep->clk_enet_out);
fep->ptp_clk_on = false;
mutex_init(&fep->ptp_clk_mutex);
+
+ /* clk_ref is optional, depends on board */
+ fep->clk_ref = devm_clk_get(&pdev->dev, "enet_clk_ref");
+ if (IS_ERR(fep->clk_ref))
+ fep->clk_ref = NULL;
+
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
fep->bufdesc_ex =
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;