int no_broadcast = DEFAULT_SEND_IPI;
-#ifdef CONFIG_X86_LOCAL_APIC
+static __init int no_ipi_broadcast(char *str)
+{
+ get_option(&str, &no_broadcast);
+ pr_info("Using %s mode\n",
+ no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
+ return 1;
+}
+__setup("no_ipi_broadcast=", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+ pr_info("Using IPI %s mode\n",
+ no_broadcast ? "No-Shortcut" : "Shortcut");
+ return 0;
+}
+late_initcall(print_ipi_mode);
void default_setup_apic_routing(void)
{
}
return 0;
}
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
- if (x86_quirks->arch_pre_intr_init) {
- if (x86_quirks->arch_pre_intr_init())
- return;
- }
- init_ISA_irqs();
-}
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- * Fill in any interrupts that may have been left out by the general
- * init_IRQ() routine. interrupts having to do with the machine rather
- * than the devices on the I/O bus (like APIC interrupts in intel MP
- * systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
- if (x86_quirks->arch_intr_init) {
- if (x86_quirks->arch_intr_init())
- return;
- }
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- * generally used to activate any machine specific identification
- * routines that may be needed before setup_arch() runs. On Voyager
- * this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- * Called as the final act of trap_init(). Used in VISWS to initialise
- * the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
- if (x86_quirks->arch_trap_init) {
- if (x86_quirks->arch_trap_init())
- return;
- }
-}
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
- .mask = CPU_MASK_NONE,
- .name = "timer"
-};
-
-/**
- * pre_time_init_hook - do any specific initialisations before.
- *
- **/
-void __init pre_time_init_hook(void)
-{
- if (x86_quirks->arch_pre_time_init)
- x86_quirks->arch_pre_time_init();
-}
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- * Must plug the system timer interrupt source at HZ into the IRQ listed
- * in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
- if (x86_quirks->arch_time_init) {
- /*
- * A nonzero return code does not mean failure, it means
- * that the architecture quirk does not want any
- * generic (timer) setup to be performed after this:
- */
- if (x86_quirks->arch_time_init())
- return;
- }
-
- irq0.mask = cpumask_of_cpu(0);
- setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- * along the MCA bus. Use this to hook into that chain if you will need
- * it.
- **/
-void mca_nmi_hook(void)
-{
- /*
- * If I recall correctly, there's a whole bunch of other things that
- * we can do to check for NMI problems, but that's all I know about
- * at the moment.
- */
- pr_warning("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
- get_option(&str, &no_broadcast);
- pr_info("Using %s mode\n",
- no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
- return 1;
-}
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
- pr_info("Using IPI %s mode\n",
- no_broadcast ? "No-Shortcut" : "Shortcut");
- return 0;
-}
-
-late_initcall(print_ipi_mode);
-
#endif
}
+#ifdef CONFIG_X86_32
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+ init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+ if (x86_quirks->arch_intr_init) {
+ if (x86_quirks->arch_intr_init())
+ return;
+ }
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On Voyager
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+ if (x86_quirks->arch_trap_init) {
+ if (x86_quirks->arch_trap_init())
+ return;
+ }
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+ .mask = CPU_MASK_NONE,
+ .name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+ if (x86_quirks->arch_pre_time_init)
+ x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ if (x86_quirks->arch_time_init) {
+ /*
+ * A nonzero return code does not mean failure, it means
+ * that the architecture quirk does not want any
+ * generic (timer) setup to be performed after this:
+ */
+ if (x86_quirks->arch_time_init())
+ return;
+ }
+
+ irq0.mask = cpumask_of_cpu(0);
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void mca_nmi_hook(void)
+{
+ /*
+ * If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+ pr_warning("NMI generated from unknown source!\n");
+}
+#endif /* CONFIG_MCA */
+#endif /* CONFIG_X86_32 */
projects / karo-tx-linux.git / commitdiff