--- /dev/null
+What: /proc/<pid>/oom_adj
+When: August 2012
+Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
+ badness heuristic used to determine which task to kill when the kernel
+ is out of memory.
+
+ The badness heuristic has since been rewritten since the introduction of
+ this tunable such that its meaning is deprecated. The value was
+ implemented as a bitshift on a score generated by the badness()
+ function that did not have any precise units of measure. With the
+ rewrite, the score is given as a proportion of available memory to the
+ task allocating pages, so using a bitshift which grows the score
+ exponentially is, thus, impossible to tune with fine granularity.
+
+ A much more powerful interface, /proc/<pid>/oom_score_adj, was
+ introduced with the oom killer rewrite that allows users to increase or
+ decrease the badness() score linearly. This interface will replace
+ /proc/<pid>/oom_adj.
+
+ A warning will be emitted to the kernel log if an application uses this
+ deprecated interface. After it is printed once, future warnings will be
+ suppressed until the kernel is rebooted.
Kernel boot arguments
---------------------
-vram=<size>
- - Amount of total VRAM to preallocate. For example, "10M". omapfb
- allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+ - Amount of total VRAM to preallocate and optionally a physical start
+ memory address. For example, "10M". omapfb allocates memory for
+ framebuffers from VRAM.
omapfb.mode=<display>:<mode>[,...]
- Default video mode for specified displays. For example,
As of the Linux 2.6.10 kernel, it is now possible to change the
IO scheduler for a given block device on the fly (thus making it possible,
for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
can improve that device's throughput).
To set a specific scheduler, simply do this:
will be displayed, with the currently selected scheduler in brackets:
# cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
# cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq
Who: NeilBrown <neilb@suse.de>
----------------------------
+
+What: i2c_adapter.id
+When: June 2011
+Why: This field is deprecated. I2C device drivers shouldn't change their
+ behavior based on the underlying I2C adapter. Instead, the I2C
+ adapter driver should instantiate the I2C devices and provide the
+ needed platform-specific information.
+Who: Jean Delvare <khali@linux-fr.org>
+
+----------------------------
Roadmap:
-2.6.37 Remove experimental tag from mount option
- => should be roughly 6 months after initial merge
- => enough time to:
- => gain confidence and fix problems reported by early
- adopters (a.k.a. guinea pigs)
- => address worst performance regressions and undesired
- behaviours
- => start tuning/optimising code for parallelism
- => start tuning/optimising algorithms consuming
- excessive CPU time
-
2.6.39 Switch default mount option to use delayed logging
=> should be roughly 12 months after initial merge
=> enough time to shake out remaining problems before next round of
arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
- Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+ Format: {"cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
Setting the brightness to zero with brightness_set() callback function
should completely turn off the LED and cancel the previously programmed
--- /dev/null
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ }, {
+ .chan_nr = 1,
+ .led_current = 0,
+ .max_current = 130,
+ }, {
+ .chan_nr = 2,
+ .led_current = 0,
+ .max_current = 130,
+ }
+};
+
+static int lp5521_setup(void)
+{
+ /* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+ /* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_EXT,
+ .setup_resources = lp5521_setup,
+ .release_resources = lp5521_release,
+ .enable = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
--- /dev/null
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ },
+...
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ .max_current = 130,
+ }
+};
+
+static int lp5523_setup(void)
+{
+ /* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+ /* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+ .led_config = lp5523_led_config,
+ .num_channels = ARRAY_SIZE(lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_EXT,
+ .setup_resources = lp5523_setup,
+ .release_resources = lp5523_release,
+ .enable = lp5523_enable,
+};
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
+route/max_size - INTEGER
+ Maximum number of routes allowed in the kernel. Increase
+ this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+ Maximum number of neighbor entries allowed. Increase this
+ when using large numbers of interfaces and when communicating
+ with large numbers of directly-connected peers.
+
mtu_expires - INTEGER
Time, in seconds, that cached PMTU information is kept.
To quote Linux Weekly News:
There are a number of red-black trees in use in the kernel.
- The anticipatory, deadline, and CFQ I/O schedulers all employ
- rbtrees to track requests; the packet CD/DVD driver does the same.
+ The deadline and CFQ I/O schedulers employ rbtrees to
+ track requests; the packet CD/DVD driver does the same.
The high-resolution timer code uses an rbtree to organize outstanding
timer requests. The ext3 filesystem tracks directory entries in a
red-black tree. Virtual memory areas (VMAs) are tracked with red-black
- core_uses_pid
- ctrl-alt-del
- dentry-state
+- dmesg_restrict
- domainname
- hostname
- hotplug
==============================================================
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer. When
+dmesg_restrict is set to (0) there are no restrictions. When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
domainname & hostname:
These files can be used to set the NIS/YP domainname and the
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/serial/8250*
F: include/linux/serial_8250.h
L: linux-sh@vger.kernel.org
W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
FRAMEBUFFER LAYER
L: linux-fbdev@vger.kernel.org
W: http://linux-fbdev.sourceforge.net/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
S: Orphan
F: Documentation/fb/
F: drivers/video/fb*
STAGING SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
L: devel@driverdev.osuosl.org
S: Maintained
F: drivers/staging/
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
Q: http://patchwork.kernel.org/project/linux-sh/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
S: Supported
F: Documentation/sh/
F: arch/sh/
TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
S: Supported
F: Documentation/usb/
F: drivers/net/usb/
XEN PCI SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xensource.com
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
XEN SWIOTLB SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xensource.com
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xen.org
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.osdl.org
S: Supported
F: arch/x86/xen/
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K)
+ select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_I2C if I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S3C64XX series based systems
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5P6442 CPU based systems
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PC100 series based systems
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
- select HAVE_S3C_RTC
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV310 series based systems
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
- * Set priority on all interrupts.
+ * Set priority on all global interrupts.
*/
- for (i = 0; i < max_irq; i += 4)
+ for (i = 32; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
- * Disable all interrupts.
+ * Disable all interrupts. Leave the PPI and SGIs alone
+ * as these enables are banked registers.
*/
- for (i = 0; i < max_irq; i += 32)
+ for (i = 32; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
+ void __iomem *dist_base;
+ int i;
+
if (gic_nr >= MAX_GIC_NR)
BUG();
+ dist_base = gic_data[gic_nr].dist_base;
+ BUG_ON(!dist_base);
+
gic_data[gic_nr].cpu_base = base;
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
-#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
breakpoint_handler(addr, regs);
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
- WARN_ON("Asynchronous watchpoint exception taken. "
- "Debugging results may be unreliable");
+ WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, regs);
break;
static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
enum armv7_counters counter)
{
- int ret;
+ int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
- sprint_symbol(sym1, where);
- sprint_symbol(sym2, from);
- printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+ printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp);
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
*/
#ifndef __ASM_ARCH_DMA_H
#include <linux/list.h>
#include <linux/types.h>
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
struct ep93xx_dma_buffer {
struct list_head list;
u32 bus_addr;
u16 size;
};
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * The arguments are the user data cookie and the DMA
+ * buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ * The arguments are the user data cookie, the DMA buffer
+ * which has completed, and a boolean flag indicating if
+ * the transfer had an error.
+ */
struct ep93xx_dma_m2p_client {
char *name;
u8 flags;
struct ep93xx_dma_buffer *buf,
int bytes, int error);
- /* Internal to the DMA code. */
+ /* private: Internal use only */
void *channel;
};
+/* DMA M2P ports */
#define EP93XX_DMA_M2P_PORT_I2S1 0x00
#define EP93XX_DMA_M2P_PORT_I2S2 0x01
#define EP93XX_DMA_M2P_PORT_AAC1 0x02
#define EP93XX_DMA_M2P_PORT_UART3 0x08
#define EP93XX_DMA_M2P_PORT_IRDA 0x09
#define EP93XX_DMA_M2P_PORT_MASK 0x0f
-#define EP93XX_DMA_M2P_TX 0x00
-#define EP93XX_DMA_M2P_RX 0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
-#define EP93XX_DMA_M2P_ERROR_MASK 0x60
-int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
#endif /* __ASM_ARCH_DMA_H */
kirkwood_pcie_id(&dev, &rev);
- if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
- rev == MV88F6281_REV_A1)) ||
- (dev == MV88F6282_DEV_ID))
- return 200000000;
+ if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+ if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+ return 200000000;
return 166666667;
}
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
pr_err("Failed to power up HDD%d\n", i + 1);
}
}
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
- .init = lacie_v2_timer_init,
-};
void lacie_v2_register_i2c_devices(void);
void lacie_v2_hdd_power_init(int hdd_num);
-extern struct sys_timer lacie_v2_timer;
-
#endif
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#include "mpp.h"
#include "tsx1x-common.h"
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
static int __init ts41x_pci_init(void)
{
- if (machine_is_ts41x())
+ if (machine_is_ts41x()) {
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
kirkwood_pcie_init(KW_PCIE0);
+ }
return 0;
}
#ifdef CONFIG_CPU_MMP2
static inline int cpu_is_mmp2(void)
{
- return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+ return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
#else
#define cpu_is_mmp2() (0)
#endif
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
static int __init omap_init_wdt(void)
{
if (!cpu_is_omap16xx())
- return;
+ return -ENODEV;
- platform_device_register(&omap_wdt_device);
- return 0;
+ return platform_device_register(&omap_wdt_device);
}
subsys_initcall(omap_init_wdt);
#endif
#ifndef __ASM_ARCH_CAMERA_H_
#define __ASM_ARCH_CAMERA_H_
+#include <media/omap1_camera.h>
+
void omap1_camera_init(void *);
static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
/* Initialize gpiolib. */
orion_gpio_init();
- while (mode->mpp >= 0) {
+ for ( ; mode->mpp >= 0; mode++) {
u32 *reg;
int num_type;
int shift;
orion_gpio_set_unused(mode->mpp);
orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
- mode++;
}
writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device ts78xx_ts_nand_device = {
static void __init cmx2xx_init_irq(void)
{
- pxa27x_init_irq();
-
if (cpu_is_pxa25x()) {
pxa25x_init_irq();
cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
},
};
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static uint16_t lcd_power_on[] = {
/* single frame */
SMART_CMD_NOOP,
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
}, {
.clk = {
.name = "audio-bus",
- .id = -1, /* There's only one IISv4 port */
+ .id = 2,
.ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
.enable = s3c64xx_sclk_ctrl,
},
#include <plat/audio.h>
#include <plat/gpio-cfg.h>
-static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+static const char *rclksrc[] = {
+ [0] = "iis",
+ [1] = "audio-bus",
+};
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
case 1:
base = S3C64XX_GPE(0);
break;
+ case 2:
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+ return 0;
default:
printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
pdev->id);
return 0;
}
-static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
-
- return 0;
-}
-
static struct resource s3c64xx_iis0_resource[] = {
[0] = {
.start = S3C64XX_PA_IIS0,
},
};
-static struct s3c_audio_pdata s3c_i2s0_pdata = {
- .cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s3c64xx_i2s_cfg_gpio,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc,
+ },
+ },
};
struct platform_device s3c64xx_device_iis0 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_iis0_resource),
.resource = s3c64xx_iis0_resource,
.dev = {
- .platform_data = &s3c_i2s0_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_iis0);
},
};
-static struct s3c_audio_pdata s3c_i2s1_pdata = {
- .cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
-};
-
struct platform_device s3c64xx_device_iis1 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_iis1_resource),
.resource = s3c64xx_iis1_resource,
.dev = {
- .platform_data = &s3c_i2s1_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_iis1);
},
};
-static struct s3c_audio_pdata s3c_i2sv4_pdata = {
- .cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+static struct s3c_audio_pdata i2sv4_pdata = {
+ .cfg_gpio = s3c64xx_i2s_cfg_gpio,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN,
+ .src_clk = rclksrc,
+ },
+ },
};
struct platform_device s3c64xx_device_iisv4 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 2,
.num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
.resource = s3c64xx_iisv4_resource,
.dev = {
- .platform_data = &s3c_i2sv4_pdata,
+ .platform_data = &i2sv4_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_iisv4);
base = S5P6442_GPC1(0);
break;
- case -1:
+ case 0:
base = S5P6442_GPC0(0);
break;
return 0;
}
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v35[] = {
+ [0] = "busclk",
+ [1] = "i2sclk",
+};
+
+static struct s3c_audio_pdata i2sv35_pdata = {
.cfg_gpio = s5p6442_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc_v35,
+ },
+ },
};
static struct resource s5p6442_iis0_resource[] = {
.end = DMACH_I2S0_RX,
.flags = IORESOURCE_DMA,
},
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
};
struct platform_device s5p6442_device_iis0 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 0,
.num_resources = ARRAY_SIZE(s5p6442_iis0_resource),
.resource = s5p6442_iis0_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv35_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "iis",
+ [1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5p6442_cfg_i2s,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc_v3,
+ },
},
};
};
struct platform_device s5p6442_device_iis1 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 1,
.num_resources = ARRAY_SIZE(s5p6442_iis1_resource),
.resource = s5p6442_iis1_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 25),
}, {
- .name = "i2s_v40",
+ .name = "iis",
.id = 0,
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
}, {
.name = "iis",
- .id = -1,
+ .id = 0,
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 26),
#include <mach/dma.h>
#include <mach/irqs.h>
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
+static const char *rclksrc[] = {
+ [0] = "iis",
+ [1] = "sclk_audio2",
+};
+
+static int s5p64x0_cfg_i2s(struct platform_device *pdev)
{
/* configure GPIO for i2s port */
switch (pdev->id) {
- case -1:
+ case 0:
s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
break;
-
default:
printk(KERN_ERR "Invalid Device %d\n", pdev->id);
return -EINVAL;
return 0;
}
-static int s5p6450_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case -1:
- s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
-
- break;
-
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
- .cfg_gpio = s5p6440_cfg_i2s,
-};
-
-static struct s3c_audio_pdata s5p6450_i2s_pdata = {
- .cfg_gpio = s5p6450_cfg_i2s,
+static struct s3c_audio_pdata s5p64x0_i2s_pdata = {
+ .cfg_gpio = s5p64x0_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN,
+ .src_clk = rclksrc,
+ },
+ },
};
static struct resource s5p64x0_iis0_resource[] = {
};
struct platform_device s5p6440_device_iis = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 0,
.num_resources = ARRAY_SIZE(s5p64x0_iis0_resource),
.resource = s5p64x0_iis0_resource,
.dev = {
- .platform_data = &s5p6440_i2s_pdata,
+ .platform_data = &s5p64x0_i2s_pdata,
},
};
struct platform_device s5p6450_device_iis0 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 0,
.num_resources = ARRAY_SIZE(s5p64x0_iis0_resource),
.resource = s5p64x0_iis0_resource,
.dev = {
- .platform_data = &s5p6450_i2s_pdata,
+ .platform_data = &s5p64x0_i2s_pdata,
},
};
{
/* configure GPIO for i2s port */
switch (pdev->id) {
+ case 0: /* Dedicated pins */
+ break;
case 1:
s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
break;
-
case 2:
s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
break;
-
- case -1: /* Dedicated pins */
- break;
-
default:
printk(KERN_ERR "Invalid Device %d\n", pdev->id);
return -EINVAL;
return 0;
}
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v5[] = {
+ [0] = "iis",
+ [1] = "i2sclkd2",
+};
+
+static struct s3c_audio_pdata i2sv5_pdata = {
.cfg_gpio = s5pc100_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc_v5,
+ },
+ },
};
static struct resource s5pc100_iis0_resource[] = {
.end = DMACH_I2S0_RX,
.flags = IORESOURCE_DMA,
},
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
};
struct platform_device s5pc100_device_iis0 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
.resource = s5pc100_iis0_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "iis",
+ [1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5pc100_cfg_i2s,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc_v3,
+ },
},
};
};
struct platform_device s5pc100_device_iis1 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 1,
.num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
.resource = s5pc100_iis1_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
};
struct platform_device s5pc100_device_iis2 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 2,
.num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
.resource = s5pc100_iis2_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<21),
}, {
- .name = "i2s_v50",
+ .name = "iis",
.id = 0,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<4),
}, {
- .name = "i2s_v32",
- .id = 0,
+ .name = "iis",
+ .id = 1,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1 << 5),
}, {
- .name = "i2s_v32",
- .id = 1,
+ .name = "iis",
+ .id = 2,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1 << 6),
#include <mach/dma.h>
#include <mach/irqs.h>
+static const char *rclksrc[] = {
+ [0] = "busclk",
+ [1] = "i2sclk",
+};
+
static int s5pv210_cfg_i2s(struct platform_device *pdev)
{
/* configure GPIO for i2s port */
switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
+ break;
case 1:
s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
break;
-
case 2:
s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
break;
-
- case -1:
- s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
- break;
-
default:
printk(KERN_ERR "Invalid Device %d\n", pdev->id);
return -EINVAL;
return 0;
}
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static struct s3c_audio_pdata i2sv5_pdata = {
.cfg_gpio = s5pv210_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc,
+ },
+ },
};
static struct resource s5pv210_iis0_resource[] = {
.end = DMACH_I2S0_RX,
.flags = IORESOURCE_DMA,
},
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
};
struct platform_device s5pv210_device_iis0 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
+ .name = "samsung-i2s",
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pv210_iis0_resource),
.resource = s5pv210_iis0_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "iis",
+ [1] = "audio-bus",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5pv210_cfg_i2s,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc_v3,
+ },
},
};
};
struct platform_device s5pv210_device_iis1 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv210_iis1_resource),
.resource = s5pv210_iis1_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
};
struct platform_device s5pv210_device_iis2 = {
- .name = "s3c64xx-iis",
+ .name = "samsung-i2s",
.id = 2,
.num_resources = ARRAY_SIZE(s5pv210_iis2_resource),
.resource = s5pv210_iis2_resource,
.dev = {
- .platform_data = &s3c_i2s_pdata,
+ .platform_data = &i2sv3_pdata,
},
};
config CPU_S5PV310
bool
+ select S3C_PL330_DMA
help
Enable S5PV310 CPU support
# Core support for S5PV310 system
obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o
+obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
# device support
+obj-y += dev-audio.o
obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+ [0] = "busclk",
+ [1] = "i2sclk",
+};
+
+static int s5pv310_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+ .cfg_gpio = s5pv310_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc,
+ },
+ },
+};
+
+static struct resource s5pv310_i2s0_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S0,
+ .end = S5PV310_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource),
+ .resource = s5pv310_i2s0_resource,
+ .dev = {
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "sclk_i2s",
+ [1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5pv310_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_NO_MUXPSR,
+ .src_clk = rclksrc_v3,
+ },
+ },
+};
+
+static struct resource s5pv310_i2s1_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S1,
+ .end = S5PV310_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource),
+ .resource = s5pv310_i2s1_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+static struct resource s5pv310_i2s2_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S2,
+ .end = S5PV310_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s2 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource),
+ .resource = s5pv310_i2s2_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5pv310_pcm_cfg_gpio,
+};
+
+static struct resource s5pv310_pcm0_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM0,
+ .end = S5PV310_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
+ .resource = s5pv310_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv310_pcm1_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM1,
+ .end = S5PV310_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
+ .resource = s5pv310_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv310_pcm2_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM2,
+ .end = S5PV310_PA_PCM2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM2_TX,
+ .end = DMACH_PCM2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM2_RX,
+ .end = DMACH_PCM2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm2 = {
+ .name = "samsung-pcm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
+ .resource = s5pv310_pcm2_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s5pv310_ac97_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_AC97,
+ .end = S5PV310_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = s5pv310_ac97_cfg_gpio,
+};
+
+static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
+ .resource = s5pv310_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s5pv310_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pv310_spdif_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_SPDIF,
+ .end = S5PV310_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+ .cfg_gpio = s5pv310_spdif_cfg_gpio,
+};
+
+static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
+ .resource = s5pv310_spdif_resource,
+ .dev = {
+ .platform_data = &samsung_spdif_pdata,
+ .dma_mask = &s5pv310_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv310_pdma0_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PDMA0,
+ .end = S5PV310_PA_PDMA0 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PDMA0,
+ .end = IRQ_PDMA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma0_pdata = {
+ .peri = {
+ [0] = DMACH_PCM0_RX,
+ [1] = DMACH_PCM0_TX,
+ [2] = DMACH_PCM2_RX,
+ [3] = DMACH_PCM2_TX,
+ [4] = DMACH_MSM_REQ0,
+ [5] = DMACH_MSM_REQ2,
+ [6] = DMACH_SPI0_RX,
+ [7] = DMACH_SPI0_TX,
+ [8] = DMACH_SPI2_RX,
+ [9] = DMACH_SPI2_TX,
+ [10] = DMACH_I2S0S_TX,
+ [11] = DMACH_I2S0_RX,
+ [12] = DMACH_I2S0_TX,
+ [13] = DMACH_I2S2_RX,
+ [14] = DMACH_I2S2_TX,
+ [15] = DMACH_UART0_RX,
+ [16] = DMACH_UART0_TX,
+ [17] = DMACH_UART2_RX,
+ [18] = DMACH_UART2_TX,
+ [19] = DMACH_UART4_RX,
+ [20] = DMACH_UART4_TX,
+ [21] = DMACH_SLIMBUS0_RX,
+ [22] = DMACH_SLIMBUS0_TX,
+ [23] = DMACH_SLIMBUS2_RX,
+ [24] = DMACH_SLIMBUS2_TX,
+ [25] = DMACH_SLIMBUS4_RX,
+ [26] = DMACH_SLIMBUS4_TX,
+ [27] = DMACH_AC97_MICIN,
+ [28] = DMACH_AC97_PCMIN,
+ [29] = DMACH_AC97_PCMOUT,
+ [30] = DMACH_MAX,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct platform_device s5pv310_device_pdma0 = {
+ .name = "s3c-pl330",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv310_pdma0_resource),
+ .resource = s5pv310_pdma0_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5pv310_pdma0_pdata,
+ },
+};
+
+static struct resource s5pv310_pdma1_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PDMA1,
+ .end = S5PV310_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PDMA1,
+ .end = IRQ_PDMA1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma1_pdata = {
+ .peri = {
+ [0] = DMACH_PCM0_RX,
+ [1] = DMACH_PCM0_TX,
+ [2] = DMACH_PCM1_RX,
+ [3] = DMACH_PCM1_TX,
+ [4] = DMACH_MSM_REQ1,
+ [5] = DMACH_MSM_REQ3,
+ [6] = DMACH_SPI1_RX,
+ [7] = DMACH_SPI1_TX,
+ [8] = DMACH_I2S0S_TX,
+ [9] = DMACH_I2S0_RX,
+ [10] = DMACH_I2S0_TX,
+ [11] = DMACH_I2S1_RX,
+ [12] = DMACH_I2S1_TX,
+ [13] = DMACH_UART0_RX,
+ [14] = DMACH_UART0_TX,
+ [15] = DMACH_UART1_RX,
+ [16] = DMACH_UART1_TX,
+ [17] = DMACH_UART3_RX,
+ [18] = DMACH_UART3_TX,
+ [19] = DMACH_SLIMBUS1_RX,
+ [20] = DMACH_SLIMBUS1_TX,
+ [21] = DMACH_SLIMBUS3_RX,
+ [22] = DMACH_SLIMBUS3_TX,
+ [23] = DMACH_SLIMBUS5_RX,
+ [24] = DMACH_SLIMBUS5_TX,
+ [25] = DMACH_SLIMBUS0AUX_RX,
+ [26] = DMACH_SLIMBUS0AUX_TX,
+ [27] = DMACH_SPDIF,
+ [28] = DMACH_MAX,
+ [29] = DMACH_MAX,
+ [30] = DMACH_MAX,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct platform_device s5pv310_device_pdma1 = {
+ .name = "s3c-pl330",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv310_pdma1_resource),
+ .resource = s5pv310_pdma1_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5pv310_pdma1_pdata,
+ },
+};
+
+static struct platform_device *s5pv310_dmacs[] __initdata = {
+ &s5pv310_device_pdma0,
+ &s5pv310_device_pdma1,
+};
+
+static int __init s5pv310_dma_init(void)
+{
+ platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs));
+
+ return 0;
+}
+arch_initcall(s5pv310_dma_init);
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+#define IRQ_PDMA0 COMBINER_IRQ(21, 0)
+#define IRQ_PDMA1 COMBINER_IRQ(21, 1)
+
#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0)
#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1)
#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2)
#define S5PV310_PA_GIC_DIST (0x10501000)
#define S5PV310_PA_L2CC (0x10502000)
+/* DMA */
+#define S5PV310_PA_MDMA 0x10810000
+#define S5PV310_PA_PDMA0 0x12680000
+#define S5PV310_PA_PDMA1 0x12690000
+
#define S5PV310_PA_GPIO1 (0x11400000)
#define S5PV310_PA_GPIO2 (0x11000000)
#define S5PV310_PA_GPIO3 (0x03860000)
#define S5PV310_PA_SROMC (0x12570000)
+/* S/PDIF */
+#define S5PV310_PA_SPDIF 0xE1100000
+
+/* I2S */
+#define S5PV310_PA_I2S0 0x03830000
+#define S5PV310_PA_I2S1 0xE3100000
+#define S5PV310_PA_I2S2 0xE2A00000
+
+/* PCM */
+#define S5PV310_PA_PCM0 0x03840000
+#define S5PV310_PA_PCM1 0x13980000
+#define S5PV310_PA_PCM2 0x13990000
+
+/* AC97 */
+#define S5PV310_PA_AC97 0x139A0000
+
#define S5PV310_PA_UART (0x13800000)
#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
config SH_CLK_CPG
bool
+source "drivers/sh/Kconfig"
+
endif
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel_ro",
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
+
+static int fsi_set_rate(int is_porta, int rate)
+{
+ struct clk *fsib_clk;
+ struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ int ret;
+
+ /* set_rate is not needed if port A */
+ if (is_porta)
+ return 0;
+
+ fsib_clk = clk_get(NULL, "fsib_clk");
+ if (IS_ERR(fsib_clk))
+ return -EINVAL;
+
+ switch (rate) {
+ case 44100:
+ clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+ ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ case 48000:
+ clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+ clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+ ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ default:
+ pr_err("unsupported rate in FSI2 port B\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ clk_put(fsib_clk);
+
+ return ret;
+}
+
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
SH_FSI_IN_SLAVE_MODE |
SH_FSI_OFMT(PCM) |
SH_FSI_IFMT(PCM),
+
+ .portb_flags = SH_FSI_BRS_INV |
+ SH_FSI_BRM_INV |
+ SH_FSI_LRS_INV |
+ SH_FSI_OFMT(SPDIF),
+ .set_rate = fsi_set_rate,
};
static struct resource fsi_resources[] = {
static struct sh_mobile_hdmi_info hdmi_info = {
.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
.lcd_dev = &lcdc1_device.dev,
+ .flags = HDMI_SND_SRC_SPDIF,
};
static struct resource hdmi_resources[] = {
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define USCCR1 0xE6058144
static void __init ap4evb_init(void)
{
u32 srcr4;
/* setup USB phy */
__raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */
- /* enable FSI2 */
+ /* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
+ /* setup FSI2 port B (HDMI) */
+ gpio_request(GPIO_FN_FSIBCK, NULL);
+ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
#define SMSTPCR3 0xe615013c
#define SMSTPCR4 0xe6150140
+#define FSIDIVA 0xFE1F8000
+#define FSIDIVB 0xFE1F8008
+
/* Platforms must set frequency on their DV_CLKI pin */
struct clk sh7372_dv_clki_clk = {
};
.ops = &pllc2_clk_ops,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
+ .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1,
.parent_table = pllc2_parent,
.parent_num = ARRAY_SIZE(pllc2_parent),
};
fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
};
+/* FSI DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+ unsigned long value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ if ((value & 0x3) != 0x3)
+ return 0;
+
+ value >>= 16;
+ if (value < 2)
+ return 0;
+
+ return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_div_range_round(clk, 2, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+ unsigned long value;
+
+ value = __raw_readl(clk->mapping->base) >> 16;
+ if (value < 2) {
+ fsidiv_disable(clk);
+ return -ENOENT;
+ }
+
+ __raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+ return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk,
+ unsigned long rate, int algo_id)
+{
+ int idx;
+
+ if (clk->parent->rate == rate) {
+ fsidiv_disable(clk);
+ return 0;
+ }
+
+ idx = (clk->parent->rate / rate) & 0xffff;
+ if (idx < 2)
+ return -ENOENT;
+
+ __raw_writel(idx << 16, clk->mapping->base);
+ return fsidiv_enable(clk);
+}
+
+static struct clk_ops fsidiv_clk_ops = {
+ .recalc = fsidiv_recalc,
+ .round_rate = fsidiv_round_rate,
+ .set_rate = fsidiv_set_rate,
+ .enable = fsidiv_enable,
+ .disable = fsidiv_disable,
+};
+
+static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+ .phys = FSIDIVA,
+ .len = 8,
+};
+
+struct clk sh7372_fsidiva_clk = {
+ .ops = &fsidiv_clk_ops,
+ .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
+ .mapping = &sh7372_fsidiva_clk_mapping,
+};
+
+static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+ .phys = FSIDIVB,
+ .len = 8,
+};
+
+struct clk sh7372_fsidivb_clk = {
+ .ops = &fsidiv_clk_ops,
+ .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
+ .mapping = &sh7372_fsidivb_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &sh7372_fsidiva_clk,
+ &sh7372_fsidivb_clk,
+};
+
enum { MSTP001,
MSTP131, MSTP130,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
static inline int gpio_to_irq(unsigned gpio)
{
- return -ENOSYS;
+ return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
- return -EINVAL;
+ return -ENOSYS;
}
#endif /* CONFIG_GPIOLIB */
extern struct clk sh7372_pllc2_clk;
extern struct clk sh7372_fsiack_clk;
extern struct clk sh7372_fsibck_clk;
+extern struct clk sh7372_fsidiva_clk;
+extern struct clk sh7372_fsidivb_clk;
#endif /* __ASM_SH7372_H__ */
INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+ INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
static void __init ct_ca9x4_map_io(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
* fragmentation of the DMA space, and also prevents allocations
* smaller than a section from crossing a section boundary.
*/
- bit = fls(size - 1) + 1;
+ bit = fls(size - 1);
if (bit > SECTION_SHIFT)
bit = SECTION_SHIFT;
align = 1 << bit;
if (!size)
return;
- paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+ paddr = memblock_alloc(size, SZ_1M);
if (!paddr) {
pr_err("%s: failed to reserve %x bytes\n",
__func__, size);
return;
}
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
omap_dsp_phys_mempool_base = paddr;
}
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
dma_write(1 << ch, IRQSTATUS_L0);
+ /* read back the register to flush the write */
+ dma_read(IRQSTATUS_L0);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
#ifndef __PLAT_PCIE_H
#define __PLAT_PCIE_H
+struct pci_bus;
+
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
u16 cmd;
u32 mask;
- /*
- * soft reset PCIe unit
- */
- orion_pcie_reset(base);
-
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
#define S5PC100_SPDIF_GPG3 1
extern void s5pc100_spdif_setup_gpio(int);
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN (1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI (1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR (1 << 2)
+#define QUIRK_NEED_RSTCLR (1 << 3)
+ /* Quirks of the I2S controller */
+ u32 quirks;
+
+ /*
+ * Array of clock names that can be used to generate I2S signals.
+ * Also corresponds to clocks of I2SMOD[10]
+ */
+ const char **src_clk;
+};
+
/**
* struct s3c_audio_pdata - common platform data for audio device drivers
* @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
*/
struct s3c_audio_pdata {
int (*cfg_gpio)(struct platform_device *);
+ union {
+ struct samsung_i2s i2s;
+ } type;
};
extern struct platform_device s5pv210_device_iis2;
extern struct platform_device s5pv210_device_spdif;
+extern struct platform_device s5pv310_device_ac97;
+extern struct platform_device s5pv310_device_pcm0;
+extern struct platform_device s5pv310_device_pcm1;
+extern struct platform_device s5pv310_device_pcm2;
+extern struct platform_device s5pv310_device_i2s0;
+extern struct platform_device s5pv310_device_i2s1;
+extern struct platform_device s5pv310_device_i2s2;
+extern struct platform_device s5pv310_device_spdif;
+
extern struct platform_device s5p6442_device_pcm0;
extern struct platform_device s5p6442_device_pcm1;
extern struct platform_device s5p6442_device_iis0;
#define _M68K_IRQFLAGS_H
#include <linux/types.h>
+#ifdef CONFIG_MMU
#include <linux/hardirq.h>
+#endif
#include <linux/preempt.h>
#include <asm/thread_info.h>
#include <asm/entry.h>
extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
extern void config_BSP(char *command, int len);
+extern void do_IRQ(int irq, struct pt_regs *fp);
#endif /* _M68K_MACHDEP_H */
static void kvm_patch_ins_b(u32 *inst, int addr)
{
-#ifdef CONFIG_RELOCATABLE
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC_BOOK3S)
/* On relocatable kernels interrupts handlers and our code
can be in different regions, so we don't patch them */
lwz r3, VCPU_PC(r4)
mtsrr0 r3
lwz r3, VCPU_SHARED(r4)
- lwz r3, VCPU_SHARED_MSR(r3)
+ lwz r3, (VCPU_SHARED_MSR + 4)(r3)
oris r3, r3, KVMPPC_MSR_MASK@h
ori r3, r3, KVMPPC_MSR_MASK@l
mtsrr1 r3
struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
free_page((unsigned long)vcpu->arch.shared);
- kvmppc_e500_tlb_uninit(vcpu_e500);
kvm_vcpu_uninit(vcpu);
+ kvmppc_e500_tlb_uninit(vcpu_e500);
kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
}
switch (ioctl) {
case KVM_PPC_GET_PVINFO: {
struct kvm_ppc_pvinfo pvinfo;
+ memset(&pvinfo, 0, sizeof(pvinfo));
r = kvm_vm_ioctl_get_pvinfo(&pvinfo);
if (copy_to_user(argp, &pvinfo, sizeof(pvinfo))) {
r = -EFAULT;
int i;
/* pause guest execution to avoid concurrent updates */
- local_irq_disable();
mutex_lock(&vcpu->mutex);
vcpu->arch.last_exit_type = 0xDEAD;
vcpu->arch.timing_last_enter.tv64 = 0;
mutex_unlock(&vcpu->mutex);
- local_irq_enable();
}
static void add_exit_timing(struct kvm_vcpu *vcpu, u64 duration, int type)
config CPU_SH2A
bool
select CPU_SH2
+ select UNCACHED_MAPPING
config CPU_SH3
bool
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh
-machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
machdir-$(CONFIG_SH_MIGOR) += mach-migor
machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
# Specific board support, not covered by a mach group.
#
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
obj-$(CONFIG_SH_SH2007) += board-sh2007.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
obj-$(CONFIG_SH_ESPT) += board-espt.o
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
--- /dev/null
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE 0xA2000000
+#define SMC_IO_OFFSET 0x300
+#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ 0x09
+
+static void __init sh_edosk7705_init_irq(void)
+{
+ make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+ [0] = {
+ .start = SMC_IOADDR,
+ .end = SMC_IOADDR + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ETHERNET_IRQ,
+ .end = ETHERNET_IRQ,
+ .flags = IORESOURCE_IRQ ,
+ }
+};
+
+static struct platform_device smc91x_dev = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_res),
+ .resource = smc91x_res,
+
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+ &smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+ return platform_add_devices(edosk7705_devices,
+ ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+ .mv_name = "EDOSK7705",
+ .mv_nr_irqs = 80,
+ .mv_init_irq = sh_edosk7705_init_irq,
+};
/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
*
#include <linux/module.h>
#include <linux/sched.h>
#include <asm/machvec.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <cpu/timer.h>
+unsigned short secureedge5410_ioport;
+
/*
* EraseConfig handling functions
*/
-
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
{
- (void)__raw_readb(0xb8000000); /* dummy read */
+ ctrl_delay(); /* dummy read */
printk("SnapGear: erase switch interrupt!\n");
static int __init eraseconfig_init(void)
{
+ unsigned int irq = evt2irq(0x240);
+
printk("SnapGear: EraseConfig init\n");
+
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+ if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
"Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- IRL0_IRQ);
+ irq);
else
printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- IRL0_IRQ);
- return(0);
+ irq);
+ return 0;
}
-
module_init(eraseconfig_init);
-/****************************************************************************/
/*
* Initialize IRQ setting
*
* IRL2 = eth1
* IRL3 = crypto
*/
-
static void __init init_snapgear_IRQ(void)
{
printk("Setup SnapGear IRQ/IPR ...\n");
static struct sh_machine_vector mv_snapgear __initmv = {
.mv_name = "SnapGear SecureEdge5410",
.mv_nr_irqs = 72,
-
- .mv_inb = snapgear_inb,
- .mv_inw = snapgear_inw,
- .mv_inl = snapgear_inl,
- .mv_outb = snapgear_outb,
- .mv_outw = snapgear_outw,
- .mv_outl = snapgear_outl,
-
- .mv_inb_p = snapgear_inb_p,
- .mv_inw_p = snapgear_inw,
- .mv_inl_p = snapgear_inl,
- .mv_outb_p = snapgear_outb_p,
- .mv_outw_p = snapgear_outw,
- .mv_outl_p = snapgear_outl,
-
.mv_init_irq = init_snapgear_IRQ,
};
+++ /dev/null
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y := setup.o io.o
+++ /dev/null
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR 0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
- /*
- * SMC91C96 registers are 4 byte aligned rather than the
- * usual 2 byte!
- */
- if (port >= 0x300 && port < 0x320)
- return SMC_IOADDR + ((port - 0x300) * 2);
-
- maybebadio(port);
- return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
- if (port >= 0x300 && port < 0x320 && port & 0x01)
- return __raw_readw(port - 1) >> 8;
-
- return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
- if (port >= 0x300 && port < 0x320 && port & 0x01) {
- __raw_writew(((unsigned short)value << 8), port - 1);
- return;
- }
-
- __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *p = addr;
-
- while (count--)
- *p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *p = (unsigned char *)addr;
-
- while (count--)
- sh_edosk7705_outb(*p++, port);
-}
+++ /dev/null
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/edosk7705.h>
-
-static void __init sh_edosk7705_init_irq(void)
-{
- /* This is the Ethernet interrupt */
- make_imask_irq(0x09);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
- .mv_name = "EDOSK7705",
- .mv_nr_irqs = 80,
-
- .mv_inb = sh_edosk7705_inb,
- .mv_outb = sh_edosk7705_outb,
-
- .mv_insb = sh_edosk7705_insb,
- .mv_outsb = sh_edosk7705_outsb,
-
- .mv_init_irq = sh_edosk7705_init_irq,
-};
/*
* map I/O ports to memory-mapped addresses
*/
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
{
unsigned long result;
* Configuration Registers
*/
result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
- } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
- offset == KBD_STATUS_REG) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
} else if (((offset >= IO_IDE1_BASE) &&
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE1_MISC)) {
result = PVR;
}
- return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
- /* System board present, just make a dummy SRAM access. (CS0 will be
- mapped to PCI memory, probably good to avoid it.) */
- __raw_readw(0xa6800000);
-#else
- /* CS0 will be mapped to flash, ROM etc so safe to access it. */
- __raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inb(port);
-#endif
- return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inw(port);
-#endif
- return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inl(port);
-#endif
- return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outw(b, port);
- return;
- }
-#endif
- *(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outb(b, port);
- return;
- }
-#endif
-
- /*
- * There is a board feature with the current SH4-202 MicroDev in
- * that the 2 byte enables (nBE0 and nBE1) are tied together (and
- * to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
- * it is not possible to safely perform 8-bit writes to the
- * Ethernet registers, as 16-bits will be consumed from the Data
- * lines (corrupting the other byte). Hence, this function is
- * written to implement 16-bit read/modify/write for all byte-wide
- * accesses.
- *
- * Note: there is no problem with byte READS (even or odd).
- *
- * Sean McGoogan - 16th June 2003.
- */
- if ((port >= IO_LAN91C111_BASE) &&
- (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * Then are trying to perform a byte-write to the
- * LAN91C111. This needs special care.
- */
- if (port % 2 == 1) { /* is the port odd ? */
- /* unset bit-0, i.e. make even */
- const unsigned long evenPort = port-1;
- unsigned short word;
-
- /*
- * do a 16-bit read/write to write to 'port',
- * preserving even byte.
- *
- * Even addresses are bits 0-7
- * Odd addresses are bits 8-15
- */
- word = microdev_inw(evenPort);
- word = (word & 0xffu) | (b << 8);
- microdev_outw(word, evenPort);
- } else {
- /* else, we are trying to do an even byte write */
- unsigned short word;
-
- /*
- * do a 16-bit read/write to write to 'port',
- * preserving odd byte.
- *
- * Even addresses are bits 0-7
- * Odd addresses are bits 8-15
- */
- word = microdev_inw(port);
- word = (word & 0xff00u) | (b);
- microdev_outw(word, port);
- }
- } else {
- *(volatile unsigned char*)PORT2ADDR(port) = b;
- }
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outl(b, port);
- return;
- }
-#endif
- *(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
- unsigned char v = microdev_inb(port);
- delay();
- return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
- unsigned short v = microdev_inw(port);
- delay();
- return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
- unsigned int v = microdev_inl(port);
- delay();
- return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
- microdev_outb(b, port);
- delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
- microdev_outw(b, port);
- delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
- microdev_outl(b, port);
- delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned char *port_addr;
- unsigned char *buf = buffer;
-
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned short *port_addr;
- unsigned short *buf = buffer;
-
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned long *port_addr;
- unsigned int *buf = buffer;
-
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned char *port_addr;
- const unsigned char *buf = buffer;
-
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned short *port_addr;
- const unsigned short *buf = buffer;
-
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned long *port_addr;
- const unsigned int *buf = buffer;
-
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
+ return (void __iomem *)result;
}
static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
.mv_nr_irqs = 72,
-
- .mv_inb = microdev_inb,
- .mv_inw = microdev_inw,
- .mv_inl = microdev_inl,
- .mv_outb = microdev_outb,
- .mv_outw = microdev_outw,
- .mv_outl = microdev_outl,
-
- .mv_inb_p = microdev_inb_p,
- .mv_inw_p = microdev_inw_p,
- .mv_inl_p = microdev_inl_p,
- .mv_outb_p = microdev_outb_p,
- .mv_outw_p = microdev_outw_p,
- .mv_outl_p = microdev_outl_p,
-
- .mv_insb = microdev_insb,
- .mv_insw = microdev_insw,
- .mv_insl = microdev_insl,
- .mv_outsb = microdev_outsb,
- .mv_outsw = microdev_outsw,
- .mv_outsl = microdev_outsl,
-
+ .mv_ioport_map = microdev_ioport_map,
.mv_init_irq = init_microdev_irq,
};
# Makefile for the 7206 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
+++ /dev/null
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
- __raw_readw(0x20000000); /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000 && port < 0x2020)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x300 && port < 0x310)
- return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
- return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
- unsigned long v;
-
- v = (*port2adr(port)) & 0xff;
- delay();
- return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
- return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
- delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
- *port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- while (count--)
- *p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
- while (count--)
- *p = *ap++;
-}
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+ __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
/* FPGA System register setup*/
__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
__raw_writew(0x0001,INTSEL);
}
static struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 256,
- .mv_inb = se7206_inb,
- .mv_inw = se7206_inw,
- .mv_outb = se7206_outb,
- .mv_outw = se7206_outw,
-
- .mv_inb_p = se7206_inb_p,
- .mv_inw_p = se7206_inw,
- .mv_outb_p = se7206_outb_p,
- .mv_outw_p = se7206_outw,
-
- .mv_insb = se7206_insb,
- .mv_insw = se7206_insw,
- .mv_outsb = se7206_outsb,
- .mv_outsw = se7206_outsw,
-
.mv_init_irq = init_se7206_IRQ,
};
# Makefile for the 770x SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
+++ /dev/null
-/*
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port & 0xff000000)
- return ( volatile __u16 *) port;
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x1000)
- return (volatile __u16 *) (PA_83902 + (port << 1));
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
- if (shifted_port(port))
- return (*port2adr(port) >> 8);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
- unsigned long v;
-
- if (shifted_port(port))
- v = (*port2adr(port) >> 8);
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
- if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
- maybebadio(port);
- return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
- if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
- if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
- if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
- maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- if (shifted_port(port)) {
- while (count--)
- *ap++ = *p >> 8;
- } else {
- while (count--)
- *ap++ = *p;
- }
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- if (shifted_port(port)) {
- while (count--)
- *p = *ap++ << 8;
- } else {
- while (count--)
- *p = *ap++;
- }
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
-
- while (count--)
- *p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
.mv_nr_irqs = 104,
#endif
-
- .mv_inb = se_inb,
- .mv_inw = se_inw,
- .mv_inl = se_inl,
- .mv_outb = se_outb,
- .mv_outw = se_outw,
- .mv_outl = se_outl,
-
- .mv_inb_p = se_inb_p,
- .mv_inw_p = se_inw,
- .mv_inl_p = se_inl,
- .mv_outb_p = se_outb_p,
- .mv_outw_p = se_outw,
- .mv_outl_p = se_outl,
-
- .mv_insb = se_insb,
- .mv_insw = se_insw,
- .mv_insl = se_insl,
- .mv_outsb = se_outsb,
- .mv_outsw = se_outsw,
- .mv_outsl = se_outsl,
-
.mv_init_irq = init_se_IRQ,
};
# Makefile for the 7751 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
+++ /dev/null
-/*
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else
- v = (*port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
static struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
.mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
.mv_init_irq = init_7751se_IRQ,
};
+++ /dev/null
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y := setup.o io.o
+++ /dev/null
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
+++ /dev/null
-#
-# Makefile for the SystemH specific parts of the kernel
-#
-
-obj-y := setup.o irq.o io.o
-
-# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more
-# importantly, with the generic sh7751_pcic_init() code. For now, we'll
-# just abuse the hell out of kbuild, because we can..
-
-obj-$(CONFIG_PCI) += pci.o
-pci-y := ../../se/7751/pci.o
-
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/systemh/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 Systemh.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <mach/systemh7751.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
- of smc lan chip*/
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751systemh_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else if (port <= 0x3F1)
- return *(volatile unsigned char *)ETHER_IOMAP(port);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751systemh_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else if (port <= 0x3F1)
- v = *(volatile unsigned char *)ETHER_IOMAP(port);
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short sh7751systemh_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else if (port <= 0x3F1)
- return *(volatile unsigned int *)ETHER_IOMAP(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int sh7751systemh_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else if (port <= 0x3F1)
- return *(volatile unsigned int *)ETHER_IOMAP(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void sh7751systemh_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (port <= 0x3F1)
- *(volatile unsigned char *)ETHER_IOMAP(port) = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751systemh_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (port <= 0x3F1)
- *(volatile unsigned char *)ETHER_IOMAP(port) = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void sh7751systemh_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else if (port <= 0x3F1)
- *(volatile unsigned short *)ETHER_IOMAP(port) = value;
- else
- maybebadio(port);
-}
-
-void sh7751systemh_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *p = addr;
- while (count--) *p++ = sh7751systemh_inb(port);
-}
-
-void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *p = addr;
- while (count--) *p++ = sh7751systemh_inw(port);
-}
-
-void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *p = (unsigned char*)addr;
- while (count--) sh7751systemh_outb(*p++, port);
-}
-
-void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *p = (unsigned short*)addr;
- while (count--) sh7751systemh_outw(*p++, port);
-}
-
-void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <mach/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-static void disable_systemh_irq(struct irq_data *data)
-{
- unsigned long val, mask = 0x01 << 1;
-
- /* Clear the "irq"th bit in the mask and set it in the request */
- val = __raw_readl((unsigned long)systemh_irq_mask_register);
- val &= ~mask;
- __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-
- val = __raw_readl((unsigned long)systemh_irq_request_register);
- val |= mask;
- __raw_writel(val, (unsigned long)systemh_irq_request_register);
-}
-
-static void enable_systemh_irq(struct irq_data *data)
-{
- unsigned long val, mask = 0x01 << 1;
-
- /* Set "irq"th bit in the mask register */
- val = __raw_readl((unsigned long)systemh_irq_mask_register);
- val |= mask;
- __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-}
-
-static struct irq_chip systemh_irq_type = {
- .name = "SystemH Register",
- .irq_unmask = enable_systemh_irq,
- .irq_mask = disable_systemh_irq,
-};
-
-void make_systemh_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
- disable_systemh_irq(irq_get_irq_data(irq));
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/systemh/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Paul Mundt
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by Jonathan Short.
- *
- * Rewritten for 2.6 by Paul Mundt.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <mach/systemh7751.h>
-
-extern void make_systemh_irq(unsigned int irq);
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7751systemh_init_irq(void)
-{
- make_systemh_irq(0xb); /* Ethernet interrupt */
-}
-
-static struct sh_machine_vector mv_7751systemh __initmv = {
- .mv_name = "7751 SystemH",
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751systemh_inb,
- .mv_inw = sh7751systemh_inw,
- .mv_inl = sh7751systemh_inl,
- .mv_outb = sh7751systemh_outb,
- .mv_outw = sh7751systemh_outw,
- .mv_outl = sh7751systemh_outl,
-
- .mv_inb_p = sh7751systemh_inb_p,
- .mv_inw_p = sh7751systemh_inw,
- .mv_inl_p = sh7751systemh_inl,
- .mv_outb_p = sh7751systemh_outb_p,
- .mv_outw_p = sh7751systemh_outw,
- .mv_outl_p = sh7751systemh_outl,
-
- .mv_insb = sh7751systemh_insb,
- .mv_insw = sh7751systemh_insw,
- .mv_insl = sh7751systemh_insl,
- .mv_outsb = sh7751systemh_outsb,
- .mv_outsw = sh7751systemh_outsw,
- .mv_outsl = sh7751systemh_outsl,
-
- .mv_init_irq = sh7751systemh_init_irq,
-};
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SYSTEMH=y
-CONFIG_PREEMPT=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
/*
* These will never work in 32-bit, don't even bother.
*/
-#define P1SEGADDR(a) __futile_remapping_attempt
-#define P2SEGADDR(a) __futile_remapping_attempt
-#define P3SEGADDR(a) __futile_remapping_attempt
-#define P4SEGADDR(a) __futile_remapping_attempt
+#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; })
#endif
#endif /* P1SEG */
#define PHYS_ADDR_MASK29 0x1fffffff
#define PHYS_ADDR_MASK32 0xffffffff
-#ifdef CONFIG_PMB
static inline unsigned long phys_addr_mask(void)
{
/* Is the MMU in 29bit mode? */
return PHYS_ADDR_MASK32;
}
-#elif defined(CONFIG_32BIT)
-static inline unsigned long phys_addr_mask(void)
-{
- return PHYS_ADDR_MASK32;
-}
-#else
-static inline unsigned long phys_addr_mask(void)
-{
- return PHYS_ADDR_MASK29;
-}
-#endif
#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <asm/types.h>
+#include <asm/uncached.h>
#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
#define instruction_size(insn) (4)
#endif
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-
void per_cpu_trap_init(void);
void default_idle(void);
void cpu_idle_wait(void);
__restore_dsp(prev); \
} while (0)
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached() \
-do { \
- unsigned long __dummy; \
- \
- __asm__ __volatile__( \
- "mova 1f, %0\n\t" \
- "add %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1:" \
- : "=&z" (__dummy) \
- : "r" (cached_to_uncached)); \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached() \
-do { \
- unsigned long __dummy; \
- ctrl_barrier(); \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
-} while (0)
-
#ifdef CONFIG_CPU_HAS_SR_RB
#define lookup_exception_vector() \
({ \
&next->thread); \
} while (0)
-#define jump_to_uncached() do { } while (0)
-#define back_to_cached() do { } while (0)
-
#define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
#define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
#define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
#include <linux/bug.h>
#ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
extern unsigned long uncached_start, uncached_end;
extern int virt_addr_uncached(unsigned long kaddr);
extern void uncached_init(void);
extern void uncached_resize(unsigned long size);
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached() \
+do { \
+ unsigned long __dummy; \
+ \
+ __asm__ __volatile__( \
+ "mova 1f, %0\n\t" \
+ "add %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1:" \
+ : "=&z" (__dummy) \
+ : "r" (cached_to_uncached)); \
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached() \
+do { \
+ unsigned long __dummy; \
+ ctrl_barrier(); \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
+} while (0)
#else
#define virt_addr_uncached(kaddr) (0)
#define uncached_init() do { } while (0)
#define uncached_resize(size) BUG()
+#define jump_to_uncached() do { } while (0)
+#define back_to_cached() do { } while (0)
#endif
#endif /* __ASM_SH_UNCACHED_H */
+++ /dev/null
-#ifndef __ASM_SH_EDOSK7705_H
-#define __ASM_SH_EDOSK7705_H
-
-#define __IO_PREFIX sh_edosk7705
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_EDOSK7705_H */
#define __IO_PREFIX microdev
#include <asm/io_generic.h>
-#if defined(CONFIG_PCI)
-unsigned char microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long microdev_pci_inl(unsigned long port);
-void microdev_pci_outb(unsigned char data, unsigned long port);
-void microdev_pci_outw(unsigned short data, unsigned long port);
-void microdev_pci_outl(unsigned long data, unsigned long port);
-#endif
-
#endif /* __ASM_SH_MICRODEV_H */
#ifndef _ASM_SH_IO_SNAPGEAR_H
#define _ASM_SH_IO_SNAPGEAR_H
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt. In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-#endif
-
#define __IO_PREFIX snapgear
#include <asm/io_generic.h>
-#ifdef CONFIG_SH_SECUREEDGE5410
/*
* We need to remember what was written to the ioport as some bits
* are shared with other functions and you cannot read back what was
((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
#define SECUREEDGE_READ_IOPORT() \
((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
#endif /* _ASM_SH_IO_SNAPGEAR_H */
+++ /dev/null
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 13
-
-#define __IO_PREFIX sh7751systemh
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
* Default rate for the root input clock, reset this with clk_set_rate()
* from the platform code.
*/
-struct clk extal_clk = {
+static struct clk extal_clk = {
.rate = 33333333,
};
.parent = &pll_clk,
};
-struct clk *main_clks[] = {
+static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
-struct clk div6_clks[DIV6_NR] = {
+static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
config 32BIT
bool
- default y if CPU_SH5
+ default y if CPU_SH5 || !MMU
config PMB
bool "Support 32-bit physical addressing through PMB"
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
-#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
- void *p1addr = vaddr;
-#else
- void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
-#endif
+ void *addr;
+
+ addr = __in_29bit_mode() ?
+ (void *)P1SEGADDR((unsigned long)vaddr) : vaddr;
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
- __flush_invalidate_region(p1addr, size);
+ __flush_invalidate_region(addr, size);
break;
case DMA_TO_DEVICE: /* writeback only */
- __flush_wback_region(p1addr, size);
+ __flush_wback_region(addr, size);
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- __flush_purge_region(p1addr, size);
+ __flush_purge_region(addr, size);
break;
default:
BUG();
void __init uncached_init(void)
{
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
uncached_start = P2SEG;
#else
uncached_start = memory_end;
7724SE SH_7724_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
-7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
SNAPGEAR SH_SECUREEDGE5410
#include <linux/interrupt.h>
#include <linux/threads.h>
-#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/homecache.h>
#define _ASM_TILE_KMAP_TYPES_H
/*
- * In TILE Linux each set of four of these uses another 16MB chunk of
- * address space, given 64 tiles and 64KB pages, so we only enable
- * ones that are required by the kernel configuration.
+ * In 32-bit TILE Linux we have to balance the desire to have a lot of
+ * nested atomic mappings with the fact that large page sizes and many
+ * processors chew up address space quickly. In a typical
+ * 64-processor, 64KB-page layout build, making KM_TYPE_NR one larger
+ * adds 4MB of required address-space. For now we leave KM_TYPE_NR
+ * set to depth 8.
*/
enum km_type {
+ KM_TYPE_NR = 8
+};
+
+/*
+ * We provide dummy definitions of all the stray values that used to be
+ * required for kmap_atomic() and no longer are.
+ */
+enum {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
- KM_MEMCPY0,
- KM_MEMCPY1,
-#if defined(CONFIG_HIGHPTE)
- KM_PTE0,
- KM_PTE1,
-#endif
- KM_TYPE_NR
+ KM_SYNC_ICACHE,
+ KM_SYNC_DCACHE,
+ KM_UML_USERCOPY,
+ KM_IRQ_PTE,
+ KM_NMI,
+ KM_NMI_PTE,
+ KM_KDB
};
#endif /* _ASM_TILE_KMAP_TYPES_H */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
#if defined(CONFIG_HIGHPTE)
-extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type);
-#define pte_offset_map(dir, address) \
- _pte_offset_map(dir, address, KM_PTE0)
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+extern pte_t *pte_offset_map(pmd_t *, unsigned long address);
+#define pte_unmap(pte) kunmap_atomic(pte)
#else
#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
#define pte_unmap(pte) do { } while (0)
+#ifdef CONFIG_COMPAT
+#define __ARCH_WANT_STAT64 /* Used for compat_sys_stat64() etc. */
+#endif
#include <asm-generic/stat.h>
#ifdef CONFIG_COMPAT
#define __ARCH_WANT_SYS_LLSEEK
#endif
+#define __ARCH_WANT_SYS_NEWFSTATAT
#endif
#endif /* _ASM_TILE_UNISTD_H */
#define compat_sys_readahead sys32_readahead
#define compat_sys_sync_file_range compat_sys_sync_file_range2
-/* The native 64-bit "struct stat" matches the 32-bit "struct stat64". */
-#define compat_sys_stat64 sys_newstat
-#define compat_sys_lstat64 sys_newlstat
-#define compat_sys_fstat64 sys_newfstat
-#define compat_sys_fstatat64 sys_newfstatat
+/* We leverage the "struct stat64" type for 32-bit time_t/nsec. */
+#define compat_sys_stat64 sys_stat64
+#define compat_sys_lstat64 sys_lstat64
+#define compat_sys_fstat64 sys_fstat64
+#define compat_sys_fstatat64 sys_fstatat64
/* The native sys_ptrace dynamically handles compat binaries. */
#define compat_sys_ptrace sys_ptrace
void early_panic(const char *fmt, ...)
{
va_list ap;
- raw_local_irq_disable_all();
+ arch_local_irq_disable_all();
va_start(ap, fmt);
early_printk("Kernel panic - not syncing: ");
early_vprintk(fmt, ap);
static void enable_firewall_interrupts(void)
{
- raw_local_irq_unmask_now(INT_UDN_FIREWALL);
+ arch_local_irq_unmask_now(INT_UDN_FIREWALL);
}
static void disable_firewall_interrupts(void)
{
- raw_local_irq_mask_now(INT_UDN_FIREWALL);
+ arch_local_irq_mask_now(INT_UDN_FIREWALL);
}
/* Set up hardwall on this cpu based on the passed hardwall_info. */
}
static const struct file_operations dev_hardwall_fops = {
+ .open = nonseekable_open,
.unlocked_ioctl = hardwall_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = hardwall_compat_ioctl,
#endif
.flush = hardwall_flush,
.release = hardwall_release,
- .llseek = noop_llseek,
};
static struct cdev hardwall_dev;
#define IS_HW_CLEARED 1
/*
- * The set of interrupts we enable for raw_local_irq_enable().
+ * The set of interrupts we enable for arch_local_irq_enable().
* This is initialized to have just a single interrupt that the kernel
* doesn't actually use as a sentinel. During kernel init,
* interrupts are added as the kernel gets prepared to support them.
/* Enable interrupt delivery. */
unmask_irqs(~0UL);
#if CHIP_HAS_IPI()
- raw_local_irq_unmask(INT_IPI_K);
+ arch_local_irq_unmask(INT_IPI_K);
#endif
}
if ((entry & IND_SOURCE)) {
void *va =
- kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0);
+ kmap_atomic_pfn(entry >> PAGE_SHIFT);
r = kexec_bn2cl(va);
if (r) {
command_line = r;
break;
}
- kunmap_atomic(va, KM_USER0);
+ kunmap_atomic(va);
}
}
hverr = hv_set_command_line(
(HV_VirtAddr) command_line, strlen(command_line));
- kunmap_atomic(command_line, KM_USER0);
+ kunmap_atomic(command_line);
} else {
pr_info("%s: no command line found; making empty\n",
__func__);
panic("hv_register_message_state: error %d", rc);
/* Make sure downcall interrupts will be enabled. */
- raw_local_irq_unmask(INT_INTCTRL_K);
+ arch_local_irq_unmask(INT_INTCTRL_K);
}
void hv_message_intr(struct pt_regs *regs, int intnum)
{
unsigned long __user *datap = (long __user __force *)data;
unsigned long tmp;
- int i;
long ret = -EIO;
- unsigned long *childregs;
char *childreg;
+ struct pt_regs copyregs;
+ int ex1_offset;
switch (request) {
if (addr >= PTREGS_SIZE)
break;
childreg = (char *)task_pt_regs(child) + addr;
+
+ /* Guard against overwrites of the privilege level. */
+ ex1_offset = PTREGS_OFFSET_EX1;
+#if defined(CONFIG_COMPAT) && defined(__BIG_ENDIAN)
+ if (is_compat_task()) /* point at low word */
+ ex1_offset += sizeof(compat_long_t);
+#endif
+ if (addr == ex1_offset)
+ data = PL_ICS_EX1(USER_PL, EX1_ICS(data));
+
#ifdef CONFIG_COMPAT
if (is_compat_task()) {
if (addr & (sizeof(compat_long_t)-1))
break;
case PTRACE_GETREGS: /* Get all registers from the child. */
- if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE))
- break;
- childregs = (long *)task_pt_regs(child);
- for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long);
- ++i) {
- ret = __put_user(childregs[i], &datap[i]);
- if (ret != 0)
- break;
+ if (copy_to_user(datap, task_pt_regs(child),
+ sizeof(struct pt_regs)) == 0) {
+ ret = 0;
}
break;
case PTRACE_SETREGS: /* Set all registers in the child. */
- if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE))
- break;
- childregs = (long *)task_pt_regs(child);
- for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long);
- ++i) {
- ret = __get_user(childregs[i], &datap[i]);
- if (ret != 0)
- break;
+ if (copy_from_user(©regs, datap,
+ sizeof(struct pt_regs)) == 0) {
+ copyregs.ex1 =
+ PL_ICS_EX1(USER_PL, EX1_ICS(copyregs.ex1));
+ *task_pt_regs(child) = copyregs;
+ ret = 0;
}
break;
void machine_halt(void)
{
warn_early_printk();
- raw_local_irq_disable_all();
+ arch_local_irq_disable_all();
smp_send_stop();
hv_halt();
}
void machine_power_off(void)
{
warn_early_printk();
- raw_local_irq_disable_all();
+ arch_local_irq_disable_all();
smp_send_stop();
hv_power_off();
}
void machine_restart(char *cmd)
{
- raw_local_irq_disable_all();
+ arch_local_irq_disable_all();
smp_send_stop();
hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
}
/* Allow asynchronous TLB interrupts. */
#if CHIP_HAS_TILE_DMA()
- raw_local_irq_unmask(INT_DMATLB_MISS);
- raw_local_irq_unmask(INT_DMATLB_ACCESS);
+ arch_local_irq_unmask(INT_DMATLB_MISS);
+ arch_local_irq_unmask(INT_DMATLB_ACCESS);
#endif
#if CHIP_HAS_SN_PROC()
- raw_local_irq_unmask(INT_SNITLB_MISS);
+ arch_local_irq_unmask(INT_SNITLB_MISS);
#endif
#ifdef __tilegx__
- raw_local_irq_unmask(INT_SINGLE_STEP_K);
+ arch_local_irq_unmask(INT_SINGLE_STEP_K);
#endif
/*
for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
err |= __get_user(regs->regs[i], &sc->gregs[i]);
+ /* Ensure that the PL is always set to USER_PL. */
+ regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1));
+
regs->faultnum = INT_SWINT_1_SIGRETURN;
err |= __get_user(*pr0, &sc->gregs[0]);
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
}
- return;
+ goto done;
}
/* Did we come from a system call? */
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
+
+done:
+ /* Avoid double syscall restart if there are nested signals. */
+ regs->faultnum = INT_SWINT_1_SIGRETURN;
}
static void smp_stop_cpu_interrupt(void)
{
set_cpu_online(smp_processor_id(), 0);
- raw_local_irq_disable_all();
+ arch_local_irq_disable_all();
for (;;)
asm("nap");
}
{
BUG_ON(ticks > MAX_TICK);
__insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks);
- raw_local_irq_unmask_now(INT_TILE_TIMER);
+ arch_local_irq_unmask_now(INT_TILE_TIMER);
return 0;
}
static void tile_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- raw_local_irq_mask_now(INT_TILE_TIMER);
+ arch_local_irq_mask_now(INT_TILE_TIMER);
}
/*
evt->cpumask = cpumask_of(smp_processor_id());
/* Start out with timer not firing. */
- raw_local_irq_mask_now(INT_TILE_TIMER);
+ arch_local_irq_mask_now(INT_TILE_TIMER);
/* Register tile timer. */
clockevents_register_device(evt);
* Mask the timer interrupt here, since we are a oneshot timer
* and there are now by definition no events pending.
*/
- raw_local_irq_mask(INT_TILE_TIMER);
+ arch_local_irq_mask(INT_TILE_TIMER);
/* Track time spent here in an interrupt context */
irq_enter();
* we must run with interrupts disabled to avoid the risk of some
* other code seeing the incoherent data in our cache. (Recall that
* our cache is indexed by PA, so even if the other code doesn't use
- * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * our kmap_atomic virtual addresses, they'll still hit in cache using
* the normal VAs that aren't supposed to hit in cache.)
*/
static void memcpy_multicache(void *dest, const void *source,
unsigned long flags, newsrc, newdst;
pmd_t *pmdp;
pte_t *ptep;
+ int type0, type1;
int cpu = get_cpu();
/*
sim_allow_multiple_caching(1);
/* Set up the new dest mapping */
- idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+ type0 = kmap_atomic_idx_push();
+ idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + type0;
newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
ptep = pte_offset_kernel(pmdp, newdst);
}
/* Set up the new source mapping */
- idx += (KM_MEMCPY0 - KM_MEMCPY1);
+ type1 = kmap_atomic_idx_push();
+ idx += (type0 - type1);
src_pte = hv_pte_set_nc(src_pte);
src_pte = hv_pte_clear_writable(src_pte); /* be paranoid */
newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
* We're done: notify the simulator that all is back to normal,
* and re-enable interrupts and pre-emption.
*/
+ kmap_atomic_idx_pop();
+ kmap_atomic_idx_pop();
sim_allow_multiple_caching(0);
local_irq_restore(flags);
put_cpu();
void *__kmap_atomic(struct page *page)
{
/* PAGE_NONE is a magic value that tells us to check immutability. */
- return kmap_atomic_prot(page, type, PAGE_NONE);
+ return kmap_atomic_prot(page, PAGE_NONE);
}
EXPORT_SYMBOL(__kmap_atomic);
/* Select whether to free (1) or mark unusable (0) the __init pages. */
static int __init set_initfree(char *str)
{
- strict_strtol(str, 0, &initfree);
- pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't");
+ long val;
+ if (strict_strtol(str, 0, &val)) {
+ initfree = val;
+ pr_info("initfree: %s free init pages\n",
+ initfree ? "will" : "won't");
+ }
return 1;
}
__setup("initfree=", set_initfree);
}
#if defined(CONFIG_HIGHPTE)
-pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type)
+pte_t *_pte_offset_map(pmd_t *dir, unsigned long address)
{
- pte_t *pte = kmap_atomic(pmd_page(*dir), type) +
+ pte_t *pte = kmap_atomic(pmd_page(*dir)) +
(pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
return &pte[pte_index(address)];
}
struct task_struct;
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
- long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
extern int get_fpregs(struct user_i387_struct __user *buf,
break;
case PTRACE_SET_THREAD_AREA:
- ret = ptrace_set_thread_area(child, addr, datavp);
+ ret = ptrace_set_thread_area(child, addr, vp);
break;
case PTRACE_FAULTINFO: {
static inline u32 native_apic_msr_read(u32 reg)
{
- u32 low, high;
+ u64 msr;
if (reg == APIC_DFR)
return -1;
- rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
- return low;
+ rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+ return (u32)msr;
}
static inline void native_x2apic_wait_icr_idle(void)
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
- int msr, msr2;
+ u64 msr;
if (!cpu_has_x2apic)
return 0;
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
+ rdmsrl(MSR_IA32_APICBASE, msr);
if (msr & X2APIC_ENABLE)
return 1;
return 0;
} s;
};
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
/* ========================================================================= */
} s;
};
+/* ========================================================================= */
+/* UVH_RH_GAM_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_config_mmr_s {
+ unsigned long m_skt : 6; /* RW */
+ unsigned long n_skt : 4; /* RW */
+ unsigned long rsvd_10_11: 2; /* */
+ unsigned long mmiol_cfg : 1; /* RW */
+ unsigned long rsvd_13_63: 51; /* */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
} s;
};
-/* ========================================================================= */
-/* UVH_SI_ADDR_MAP_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
- unsigned long v;
- struct uvh_si_addr_map_config_s {
- unsigned long m_skt : 6; /* RW */
- unsigned long rsvd_6_7: 2; /* */
- unsigned long n_skt : 4; /* RW */
- unsigned long rsvd_12_63: 52; /* */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias0_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias1_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias2_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */
#include <asm/mce.h>
#include <asm/kvm_para.h>
#include <asm/tsc.h>
-#include <asm/atomic.h>
unsigned int num_processors;
#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
static __initdata struct redir_addr redir_addrs[] = {
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
};
static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
{
- union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
int i;
void __init uv_system_init(void)
{
- union uvh_si_addr_map_config_u m_n_config;
+ union uvh_rh_gam_config_mmr_u m_n_config;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
map_low_mmrs();
- m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
mmr_base =
struct amd_nb *nb;
int i;
- nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+ nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+ cpu_to_node(cpu));
if (!nb)
return NULL;
- memset(nb, 0, sizeof(*nb));
nb->nb_id = nb_id;
/*
return 0;
}
- equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+ equiv_cpu_table = vmalloc(size);
if (!equiv_cpu_table) {
pr_err("failed to allocate equivalent CPU table\n");
return 0;
wrmsrl(address, val);
}
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
{}
};
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}
valid_flags = flags;
}
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
{
u64 delta = native_read_tsc() - shadow->tsc_timestamp;
}
}
-static void set_spte_track_bits(u64 *sptep, u64 new_spte)
+static int set_spte_track_bits(u64 *sptep, u64 new_spte)
{
pfn_t pfn;
u64 old_spte = *sptep;
old_spte = __xchg_spte(sptep, new_spte);
if (!is_rmap_spte(old_spte))
- return;
+ return 0;
pfn = spte_to_pfn(old_spte);
if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
kvm_set_pfn_accessed(pfn);
if (!shadow_dirty_mask || (old_spte & shadow_dirty_mask))
kvm_set_pfn_dirty(pfn);
+ return 1;
}
static void drop_spte(struct kvm *kvm, u64 *sptep, u64 new_spte)
{
- set_spte_track_bits(sptep, new_spte);
- rmap_remove(kvm, sptep);
+ if (set_spte_track_bits(sptep, new_spte))
+ rmap_remove(kvm, sptep);
}
static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
!kvm_exception_is_soft(vcpu->arch.exception.nr);
events->exception.nr = vcpu->arch.exception.nr;
events->exception.has_error_code = vcpu->arch.exception.has_error_code;
+ events->exception.pad = 0;
events->exception.error_code = vcpu->arch.exception.error_code;
events->interrupt.injected =
events->nmi.injected = vcpu->arch.nmi_injected;
events->nmi.pending = vcpu->arch.nmi_pending;
events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu);
+ events->nmi.pad = 0;
events->sipi_vector = vcpu->arch.sipi_vector;
events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING
| KVM_VCPUEVENT_VALID_SIPI_VECTOR
| KVM_VCPUEVENT_VALID_SHADOW);
+ memset(&events->reserved, 0, sizeof(events->reserved));
}
static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
dbgregs->dr6 = vcpu->arch.dr6;
dbgregs->dr7 = vcpu->arch.dr7;
dbgregs->flags = 0;
+ memset(&dbgregs->reserved, 0, sizeof(dbgregs->reserved));
}
static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
sizeof(ps->channels));
ps->flags = kvm->arch.vpit->pit_state.flags;
mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+ memset(&ps->reserved, 0, sizeof(ps->reserved));
return r;
}
struct kvm_memslots *slots, *old_slots;
unsigned long *dirty_bitmap;
- spin_lock(&kvm->mmu_lock);
- kvm_mmu_slot_remove_write_access(kvm, log->slot);
- spin_unlock(&kvm->mmu_lock);
-
r = -ENOMEM;
dirty_bitmap = vmalloc(n);
if (!dirty_bitmap)
dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap;
kfree(old_slots);
+ spin_lock(&kvm->mmu_lock);
+ kvm_mmu_slot_remove_write_access(kvm, log->slot);
+ spin_unlock(&kvm->mmu_lock);
+
r = -EFAULT;
if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n)) {
vfree(dirty_bitmap);
user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
local_irq_enable();
user_ns.flags = 0;
+ memset(&user_ns.pad, 0, sizeof(user_ns.pad));
r = -EFAULT;
if (copy_to_user(argp, &user_ns, sizeof(user_ns)))
return X86EMUL_CONTINUE;
if (kvm_x86_ops->has_wbinvd_exit()) {
+ preempt_disable();
smp_call_function_many(vcpu->arch.wbinvd_dirty_mask,
wbinvd_ipi, NULL, 1);
+ preempt_enable();
cpumask_clear(vcpu->arch.wbinvd_dirty_mask);
}
wbinvd();
}
}
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
unsigned long action, void *hcpu)
{
switch (action & 0xf) {
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
- struct resource *root, *conflict;
u64 start, end;
status = resource_to_addr(acpi_res, &addr);
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
- root = &iomem_resource;
flags = IORESOURCE_MEM;
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
flags |= IORESOURCE_PREFETCH;
} else if (addr.resource_type == ACPI_IO_RANGE) {
- root = &ioport_resource;
flags = IORESOURCE_IO;
} else
return AE_OK;
return AE_OK;
}
- conflict = insert_resource_conflict(root, res);
- if (conflict) {
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
- } else {
- pci_bus_add_resource(info->bus, res, 0);
- info->res_num++;
- if (addr.translation_offset)
- dev_info(&info->bridge->dev, "host bridge window %pR "
- "(PCI address [%#llx-%#llx])\n",
- res, res->start - addr.translation_offset,
- res->end - addr.translation_offset);
+ info->res_num++;
+ if (addr.translation_offset)
+ dev_info(&info->bridge->dev, "host bridge window %pR "
+ "(PCI address [%#llx-%#llx])\n",
+ res, res->start - addr.translation_offset,
+ res->end - addr.translation_offset);
+ else
+ dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+ return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+ if (res->start <= point && point <= res->end)
+ return true;
+ return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+ int i, j;
+ struct resource *res1, *res2;
+
+ for (i = 0; i < info->res_num; i++) {
+ res1 = &info->res[i];
+ if (!(res1->flags & type))
+ continue;
+
+ for (j = i + 1; j < info->res_num; j++) {
+ res2 = &info->res[j];
+ if (!(res2->flags & type))
+ continue;
+
+ /*
+ * I don't like throwing away windows because then
+ * our resources no longer match the ACPI _CRS, but
+ * the kernel resource tree doesn't allow overlaps.
+ */
+ if (resource_contains(res1, res2->start) ||
+ resource_contains(res1, res2->end) ||
+ resource_contains(res2, res1->start) ||
+ resource_contains(res2, res1->end)) {
+ res1->start = min(res1->start, res2->start);
+ res1->end = max(res1->end, res2->end);
+ dev_info(&info->bridge->dev,
+ "host bridge window expanded to %pR; %pR ignored\n",
+ res1, res2);
+ res2->flags = 0;
+ }
+ }
+ }
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+ int i;
+ struct resource *res, *root, *conflict;
+
+ if (!pci_use_crs)
+ return;
+
+ coalesce_windows(info, IORESOURCE_MEM);
+ coalesce_windows(info, IORESOURCE_IO);
+
+ for (i = 0; i < info->res_num; i++) {
+ res = &info->res[i];
+
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+ else if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
else
- dev_info(&info->bridge->dev,
- "host bridge window %pR\n", res);
+ continue;
+
+ conflict = insert_resource_conflict(root, res);
+ if (conflict)
+ dev_err(&info->bridge->dev,
+ "address space collision: host bridge window %pR "
+ "conflicts with %s %pR\n",
+ res, conflict->name, conflict);
+ else
+ pci_bus_add_resource(info->bus, res, 0);
}
- return AE_OK;
}
static void
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
+ add_resources(&info);
return;
name_alloc_fail:
irq = xen_allocate_pirq(v[i], 0, /* not sharable */
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" : "pcifront-msi");
- if (irq < 0)
- return -1;
+ if (irq < 0) {
+ ret = -1;
+ goto free;
+ }
ret = set_irq_msi(irq, msidesc);
if (ret)
if (ret == -ENODEV)
dev_err(&dev->dev, "Xen PCI frontend has not registered" \
" MSI/MSI-X support!\n");
-
+free:
kfree(v);
return ret;
}
* each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
* per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
*/
- bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
- UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+ bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+ * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
BUG_ON(!bau_desc);
pa = uv_gpa(bau_desc); /* need the real nasid*/
struct bau_payload_queue_entry *pqp_malloc;
struct bau_control *bcp;
- pqp = (struct bau_payload_queue_entry *) kmalloc_node(
- (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
- GFP_KERNEL, node);
+ pqp = kmalloc_node((DEST_Q_SIZE + 1)
+ * sizeof(struct bau_payload_queue_entry),
+ GFP_KERNEL, node);
BUG_ON(!pqp);
pqp_malloc = pqp;
timeout_us = calculate_destination_timeout();
- uvhub_descs = (struct uvhub_desc *)
- kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+ uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
for_each_present_cpu(cpu) {
{
pmd_t *kernel_pmd;
- level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+ level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +
const struct e820map *e820)
{
phys_addr_t max_addr = PFN_PHYS(max_pfn);
- phys_addr_t last_end = 0;
+ phys_addr_t last_end = ISA_END_ADDRESS;
unsigned long released = 0;
int i;
+ /* Free any unused memory above the low 1Mbyte. */
for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
phys_addr_t end = e820->map[i].addr;
end = min(max_addr, end);
- released += xen_release_chunk(last_end, end);
- last_end = e820->map[i].addr + e820->map[i].size;
+ if (last_end < end)
+ released += xen_release_chunk(last_end, end);
+ last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
}
if (last_end < max_addr)
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
+ BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
}
/*
- * Even though this is normal, usable memory under Xen, reserve
- * ISA memory anyway because too many things think they can poke
+ * In domU, the ISA region is normal, usable memory, but we
+ * reserve ISA memory anyway because too many things poke
* about in there.
*
- * In a dom0 kernel, this region is identity mapped with the
- * hardware ISA area, so it really is out of bounds.
+ * In Dom0, the host E820 information can leave gaps in the
+ * ISA range, which would cause us to release those pages. To
+ * avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
int where = ELEVATOR_INSERT_SORT;
int rw_flags;
- /* REQ_HARDBARRIER is no more */
- if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
- "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
- }
-
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
bdevname(bio->bi_bdev, b),
bio->bi_rw,
(unsigned long long)bio->bi_sector + bio_sectors(bio),
- (long long)(bio->bi_bdev->bd_inode->i_size >> 9));
+ (long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
set_bit(BIO_EOF, &bio->bi_flags);
}
return 0;
/* Test device or partition size, when known. */
- maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+ maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
if (maxsector) {
sector_t sector = bio->bi_sector;
}
EXPORT_SYMBOL(get_io_context);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc)
-{
- struct io_context *src = *psrc;
- struct io_context *dst = *pdst;
-
- if (src) {
- BUG_ON(atomic_long_read(&src->refcount) == 0);
- atomic_long_inc(&src->refcount);
- put_io_context(dst);
- *pdst = src;
- }
-}
-EXPORT_SYMBOL(copy_io_context);
-
static int __init blk_ioc_init(void)
{
iocontext_cachep = kmem_cache_create("blkdev_ioc",
unaligned = 1;
break;
}
+ if (!iov[i].iov_len)
+ return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
return 0;
case BLKGETSIZE:
- size = bdev->bd_inode->i_size;
+ size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return compat_put_ulong(arg, size >> 9);
case BLKGETSIZE64_32:
- return compat_put_u64(arg, bdev->bd_inode->i_size);
+ return compat_put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESETUP32:
case BLKTRACESTART: /* compatible */
q->nr_sorted--;
boundary = q->end_sector;
- stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED;
+ stop_flags = REQ_SOFTBARRIER | REQ_STARTED;
list_for_each_prev(entry, &q->queue_head) {
struct request *pos = list_entry_rq(entry);
void __elv_add_request(struct request_queue *q, struct request *rq, int where,
int plug)
{
- if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ if (rq->cmd_flags & REQ_SOFTBARRIER) {
/* barriers are scheduling boundary, update end_sector */
if (rq->cmd_type == REQ_TYPE_FS ||
(rq->cmd_flags & REQ_DISCARD)) {
start >>= 9;
len >>= 9;
- if (start + len > (bdev->bd_inode->i_size >> 9))
+ if (start + len > (i_size_read(bdev->bd_inode) >> 9))
return -EINVAL;
if (secure)
flags |= BLKDEV_DISCARD_SECURE;
* We need to set the startsect first, the driver may
* want to override it.
*/
+ memset(&geo, 0, sizeof(geo));
geo.start = get_start_sect(bdev);
ret = disk->fops->getgeo(bdev, &geo);
if (ret)
ret = blkdev_reread_part(bdev);
break;
case BLKGETSIZE:
- size = bdev->bd_inode->i_size;
+ size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return put_ulong(arg, size >> 9);
case BLKGETSIZE64:
- return put_u64(arg, bdev->bd_inode->i_size);
+ return put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESTART:
case BLKTRACESTOP:
case BLKTRACESETUP:
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
size_t iov_data_len;
- struct sg_iovec *iov;
+ struct sg_iovec *sg_iov;
+ struct iovec *iov;
+ int i;
- iov = kmalloc(size, GFP_KERNEL);
- if (!iov) {
+ sg_iov = kmalloc(size, GFP_KERNEL);
+ if (!sg_iov) {
ret = -ENOMEM;
goto out;
}
- if (copy_from_user(iov, hdr->dxferp, size)) {
- kfree(iov);
+ if (copy_from_user(sg_iov, hdr->dxferp, size)) {
+ kfree(sg_iov);
ret = -EFAULT;
goto out;
}
+ /*
+ * Sum up the vecs, making sure they don't overflow
+ */
+ iov = (struct iovec *) sg_iov;
+ iov_data_len = 0;
+ for (i = 0; i < hdr->iovec_count; i++) {
+ if (iov_data_len + iov[i].iov_len < iov_data_len) {
+ kfree(sg_iov);
+ ret = -EINVAL;
+ goto out;
+ }
+ iov_data_len += iov[i].iov_len;
+ }
+
/* SG_IO howto says that the shorter of the two wins */
- iov_data_len = iov_length((struct iovec *)iov,
- hdr->iovec_count);
if (hdr->dxfer_len < iov_data_len) {
- hdr->iovec_count = iov_shorten((struct iovec *)iov,
+ hdr->iovec_count = iov_shorten(iov,
hdr->iovec_count,
hdr->dxfer_len);
iov_data_len = hdr->dxfer_len;
}
- ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
+ ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
iov_data_len, GFP_KERNEL);
- kfree(iov);
+ kfree(sg_iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
GFP_KERNEL);
static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
{
- kobject_put(&pcrypt->pinst->kobj);
free_cpumask_var(pcrypt->cb_cpumask->mask);
kfree(pcrypt->cb_cpumask);
# char/ comes before serial/ etc so that the VT console is the boot-time
# default.
+obj-y += tty/
obj-y += char/
# gpu/ comes after char for AGP vs DRM startup
if (!acpi_dir)
goto err;
- cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
+ cm_dentry = debugfs_create_file("custom_method", S_IWUSR,
acpi_dir, NULL, &cm_fops);
if (!cm_dentry)
goto err;
*
* If door lock fails, always clear sdev->locked to
* avoid this infinite loop.
+ *
+ * This may happen before SCSI scan is complete. Make
+ * sure qc->dev->sdev isn't NULL before dereferencing.
*/
- if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+ if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
qc->dev->sdev->locked = 0;
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
-#ifdef PATA_WINBOND_VLB_MODULE
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
static int winbond = 1; /* Set to probe Winbond controllers,
give I/O port if non standard */
#else
struct octeon_cf_data *ocd;
ap = host->ports[i];
- ocd = ap->dev->platform_data;
-
ocd = ap->dev->platform_data;
cf_port = ap->private_data;
dma_int.u64 =
SOLOS_ATTR_RO(DriverVersion)
SOLOS_ATTR_RO(APIVersion)
SOLOS_ATTR_RO(FirmwareVersion)
+SOLOS_ATTR_RO(Version)
// SOLOS_ATTR_RO(DspVersion)
// SOLOS_ATTR_RO(CommonHandshake)
SOLOS_ATTR_RO(Connected)
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
major_ver, minor_ver, fpga_ver);
+ if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
+ db_fpga_upgrade || db_firmware_upgrade)) {
+ dev_warn(&dev->dev,
+ "FPGA too old; cannot upgrade flash. Use JTAG.\n");
+ fpga_upgrade = firmware_upgrade = 0;
+ db_fpga_upgrade = db_firmware_upgrade = 0;
+ }
+
if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
} else {
BUG();
bio_endio(bio, -ENXIO);
return 0;
- } else if (bio->bi_rw & REQ_HARDBARRIER) {
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
} else if (bio->bi_io_vec == NULL) {
printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
BUG();
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
for (i = 0; i < MAX_CONFIG_WAIT; i++) {
if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
break;
- msleep(10);
+ usleep_range(10000, 20000);
}
}
*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id;
- for (i = 0; i < ARRAY_SIZE(products); i++) {
+ for (i = 0; i < ARRAY_SIZE(products); i++)
if (*board_id == products[i].board_id)
return i;
- }
dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
*board_id);
return -ENODEV;
return -ENODEV;
}
-static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
+ void __iomem *vaddr, int wait_for_ready)
+#define BOARD_READY 1
+#define BOARD_NOT_READY 0
{
- int i;
+ int i, iterations;
u32 scratchpad;
- for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
- scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
- if (scratchpad == CCISS_FIRMWARE_READY)
- return 0;
+ if (wait_for_ready)
+ iterations = CCISS_BOARD_READY_ITERATIONS;
+ else
+ iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
+
+ for (i = 0; i < iterations; i++) {
+ scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
+ if (wait_for_ready) {
+ if (scratchpad == CCISS_FIRMWARE_READY)
+ return 0;
+ } else {
+ if (scratchpad != CCISS_FIRMWARE_READY)
+ return 0;
+ }
msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
}
- dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+ dev_warn(&pdev->dev, "board not ready, timed out.\n");
return -ENODEV;
}
static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
{
h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+
+ /* Limit commands in memory limited kdump scenario. */
+ if (reset_devices && h->max_commands > 32)
+ h->max_commands = 32;
+
if (h->max_commands < 16) {
dev_warn(&h->pdev->dev, "Controller reports "
"max supported commands of %d, an obvious lie. "
err = -ENOMEM;
goto err_out_free_res;
}
- err = cciss_wait_for_board_ready(h);
+ err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
goto err_out_free_res;
err = cciss_find_cfgtables(h);
#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
#define cciss_noop(p) cciss_message(p, 3, 0)
-static __devinit int cciss_reset_msi(struct pci_dev *pdev)
-{
-/* the #defines are stolen from drivers/pci/msi.h. */
-#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-
- int pos;
- u16 control = 0;
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- if (pos) {
- pci_read_config_word(pdev, msi_control_reg(pos), &control);
- if (control & PCI_MSI_FLAGS_ENABLE) {
- dev_info(&pdev->dev, "resetting MSI\n");
- pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
- }
- }
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
- if (pos) {
- pci_read_config_word(pdev, msi_control_reg(pos), &control);
- if (control & PCI_MSIX_FLAGS_ENABLE) {
- dev_info(&pdev->dev, "resetting MSI-X\n");
- pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
- }
- }
-
- return 0;
-}
-
static int cciss_controller_hard_reset(struct pci_dev *pdev,
void * __iomem vaddr, bool use_doorbell)
{
* states or using the doorbell register. */
static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
{
- u16 saved_config_space[32];
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
void __iomem *vaddr;
unsigned long paddr;
u32 misc_fw_support, active_transport;
- int rc, i;
+ int rc;
CfgTable_struct __iomem *cfgtable;
bool use_doorbell;
u32 board_id;
+ u16 command_register;
/* For controllers as old a the p600, this is very nearly
* the same thing as
* pci_set_power_state(pci_dev, PCI_D0);
* pci_restore_state(pci_dev);
*
- * but we can't use these nice canned kernel routines on
- * kexec, because they also check the MSI/MSI-X state in PCI
- * configuration space and do the wrong thing when it is
- * set/cleared. Also, the pci_save/restore_state functions
- * violate the ordering requirements for restoring the
- * configuration space from the CCISS document (see the
- * comment below). So we roll our own ....
- *
* For controllers newer than the P600, the pci power state
* method of resetting doesn't work so we have another way
* using the doorbell register.
return -ENODEV;
}
- for (i = 0; i < 32; i++)
- pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+ /* Save the PCI command register */
+ pci_read_config_word(pdev, 4, &command_register);
+ /* Turn the board off. This is so that later pci_restore_state()
+ * won't turn the board on before the rest of config space is ready.
+ */
+ pci_disable_device(pdev);
+ pci_save_state(pdev);
/* find the first memory BAR, so we can find the cfg table */
rc = cciss_pci_find_memory_BAR(pdev, &paddr);
rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
if (rc)
goto unmap_cfgtable;
-
- /* Restore the PCI configuration space. The Open CISS
- * Specification says, "Restore the PCI Configuration
- * Registers, offsets 00h through 60h. It is important to
- * restore the command register, 16-bits at offset 04h,
- * last. Do not restore the configuration status register,
- * 16-bits at offset 06h." Note that the offset is 2*i.
- */
- for (i = 0; i < 32; i++) {
- if (i == 2 || i == 3)
- continue;
- pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ pci_restore_state(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "failed to enable device.\n");
+ goto unmap_cfgtable;
}
- wmb();
- pci_write_config_word(pdev, 4, saved_config_space[2]);
+ pci_write_config_word(pdev, 4, command_register);
/* Some devices (notably the HP Smart Array 5i Controller)
need a little pause here */
msleep(CCISS_POST_RESET_PAUSE_MSECS);
+ /* Wait for board to become not ready, then ready. */
+ dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+ rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
+ if (rc) /* Don't bail, might be E500, etc. which can't be reset */
+ dev_warn(&pdev->dev,
+ "failed waiting for board to become not ready\n");
+ rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
+ if (rc) {
+ dev_warn(&pdev->dev,
+ "failed waiting for board to become ready\n");
+ goto unmap_cfgtable;
+ }
+ dev_info(&pdev->dev, "board ready.\n");
+
/* Controller should be in simple mode at this point. If it's not,
* It means we're on one of those controllers which doesn't support
* the doorbell reset method and on which the PCI power management reset
return 0; /* just try to do the kdump anyhow. */
if (rc)
return -ENODEV;
- if (cciss_reset_msi(pdev))
- return -ENODEV;
/* Now try to get the controller to respond to a no-op */
for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
}
}
kthread_stop(cciss_scan_thread);
- remove_proc_entry("driver/cciss", NULL);
+ if (proc_cciss)
+ remove_proc_entry("driver/cciss", NULL);
bus_unregister(&cciss_bus_type);
}
* the above.
*/
#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
#define CCISS_BOARD_READY_ITERATIONS \
((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_BOARD_NOT_READY_ITERATIONS \
+ ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
#define CCISS_POST_RESET_PAUSE_MSECS (3000)
#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
#define CCISS_POST_RESET_NOOP_RETRIES (12)
init_completion(&md_io.event);
md_io.error = 0;
- if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
- rw |= REQ_HARDBARRIER;
+ if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
+ rw |= REQ_FUA;
rw |= REQ_UNPLUG | REQ_SYNC;
- retry:
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_bdev = bdev->md_bdev;
bio->bi_sector = sector;
wait_for_completion(&md_io.event);
ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
- /* check for unsupported barrier op.
- * would rather check on EOPNOTSUPP, but that is not reliable.
- * don't try again for ANY return value != 0 */
- if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
- /* Try again with no barrier */
- dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
- set_bit(MD_NO_BARRIER, &mdev->flags);
- rw &= ~REQ_HARDBARRIER;
- bio_put(bio);
- goto retry;
- }
out:
bio_put(bio);
return ok;
u32 xor_sum = 0;
if (!get_ldev(mdev)) {
- dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
+ dev_err(DEV,
+ "disk is %s, cannot start al transaction (-%d +%d)\n",
+ drbd_disk_str(mdev->state.disk), evicted, new_enr);
complete(&((struct update_al_work *)w)->event);
return 1;
}
/* do we have to do a bitmap write, first?
* TODO reduce maximum latency:
* submit both bios, then wait for both,
- * instead of doing two synchronous sector writes. */
+ * instead of doing two synchronous sector writes.
+ * For now, we must not write the transaction,
+ * if we cannot write out the bitmap of the evicted extent. */
if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
- mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
+ /* The bitmap write may have failed, causing a state change. */
+ if (mdev->state.disk < D_INCONSISTENT) {
+ dev_err(DEV,
+ "disk is %s, cannot write al transaction (-%d +%d)\n",
+ drbd_disk_str(mdev->state.disk), evicted, new_enr);
+ complete(&((struct update_al_work *)w)->event);
+ put_ldev(mdev);
+ return 1;
+ }
+
+ mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */
buffer = (struct al_transaction *)page_address(mdev->md_io_page);
buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
unsigned int enr;
unsigned long add = 0;
char ppb[10];
- int i;
+ int i, tmp;
wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
enr = lc_element_by_index(mdev->act_log, i)->lc_number;
if (enr == LC_FREE)
continue;
- add += drbd_bm_ALe_set_all(mdev, enr);
+ tmp = drbd_bm_ALe_set_all(mdev, enr);
+ dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr);
+ add += tmp;
}
lc_unlock(mdev->act_log);
#define D_ASSERT(exp) if (!(exp)) \
dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
-#define ERR_IF(exp) if (({ \
- int _b = (exp) != 0; \
- if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n", \
- __func__, #exp, __FILE__, __LINE__); \
- _b; \
+#define ERR_IF(exp) if (({ \
+ int _b = (exp) != 0; \
+ if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n", \
+ __func__, #exp, __FILE__, __LINE__); \
+ _b; \
}))
/* Defines to control fault insertion */
/* drbd_epoch flag bits */
enum {
- DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
- DE_BARRIER_IN_NEXT_EPOCH_DONE,
- DE_CONTAINS_A_BARRIER,
DE_HAVE_BARRIER_NUMBER,
- DE_IS_FINISHING,
};
enum epoch_event {
EV_PUT,
EV_GOT_BARRIER_NR,
- EV_BARRIER_DONE,
EV_BECAME_LAST,
EV_CLEANUP = 32, /* used as flag */
};
__EE_CALL_AL_COMPLETE_IO,
__EE_MAY_SET_IN_SYNC,
- /* This epoch entry closes an epoch using a barrier.
- * On sucessful completion, the epoch is released,
- * and the P_BARRIER_ACK send. */
- __EE_IS_BARRIER,
-
/* In case a barrier failed,
* we need to resubmit without the barrier flag. */
__EE_RESUBMITTED,
};
#define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
#define EE_MAY_SET_IN_SYNC (1<<__EE_MAY_SET_IN_SYNC)
-#define EE_IS_BARRIER (1<<__EE_IS_BARRIER)
#define EE_RESUBMITTED (1<<__EE_RESUBMITTED)
#define EE_WAS_ERROR (1<<__EE_WAS_ERROR)
#define EE_HAS_DIGEST (1<<__EE_HAS_DIGEST)
* Gets cleared when the state.conn
* goes into C_CONNECTED state. */
WRITE_BM_AFTER_RESYNC, /* A kmalloc() during resync failed */
- NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */
CONSIDER_RESYNC,
- MD_NO_BARRIER, /* meta data device does not support barriers,
- so don't even try */
+ MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */
SUSPEND_IO, /* suspend application io */
BITMAP_IO, /* suspend application io;
once no more io in flight, start bitmap io */
BITMAP_IO_QUEUED, /* Started bitmap IO */
- GO_DISKLESS, /* Disk failed, local_cnt reached zero, we are going diskless */
+ GO_DISKLESS, /* Disk is being detached, on io-error or admin request. */
+ WAS_IO_ERROR, /* Local disk failed returned IO error */
RESYNC_AFTER_NEG, /* Resync after online grow after the attach&negotiate finished. */
NET_CONGESTED, /* The data socket is congested */
WO_none,
WO_drain_io,
WO_bdev_flush,
- WO_bio_barrier
};
struct fifo_buffer {
extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
extern void drbd_go_diskless(struct drbd_conf *mdev);
+extern void drbd_ldev_destroy(struct drbd_conf *mdev);
/* Meta data layout
case EP_PASS_ON:
if (!forcedetach) {
if (__ratelimit(&drbd_ratelimit_state))
- dev_err(DEV, "Local IO failed in %s."
- "Passing error on...\n", where);
+ dev_err(DEV, "Local IO failed in %s.\n", where);
break;
}
/* NOTE fall through to detach case if forcedetach set */
case EP_DETACH:
case EP_CALL_HELPER:
+ set_bit(WAS_IO_ERROR, &mdev->flags);
if (mdev->state.disk > D_FAILED) {
_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
- dev_err(DEV, "Local IO failed in %s."
- "Detaching...\n", where);
+ dev_err(DEV,
+ "Local IO failed in %s. Detaching...\n", where);
}
break;
}
static inline sector_t drbd_get_capacity(struct block_device *bdev)
{
/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
- return bdev ? bdev->bd_inode->i_size >> 9 : 0;
+ return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0;
}
/**
__release(local);
D_ASSERT(i >= 0);
if (i == 0) {
+ if (mdev->state.disk == D_DISKLESS)
+ /* even internal references gone, safe to destroy */
+ drbd_ldev_destroy(mdev);
if (mdev->state.disk == D_FAILED)
+ /* all application IO references gone. */
drbd_go_diskless(mdev);
wake_up(&mdev->misc_wait);
}
{
int io_allowed;
+ /* never get a reference while D_DISKLESS */
+ if (mdev->state.disk == D_DISKLESS)
+ return 0;
+
atomic_inc(&mdev->local_cnt);
io_allowed = (mdev->state.disk >= mins);
if (!io_allowed)
{
int r;
- if (test_bit(MD_NO_BARRIER, &mdev->flags))
+ if (test_bit(MD_NO_FUA, &mdev->flags))
return;
r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL);
if (r) {
- set_bit(MD_NO_BARRIER, &mdev->flags);
+ set_bit(MD_NO_FUA, &mdev->flags);
dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
}
}
ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN)
ns.conn = os.conn;
+ /* we cannot fail (again) if we already detached */
+ if (ns.disk == D_FAILED && os.disk == D_DISKLESS)
+ ns.disk = D_DISKLESS;
+
+ /* if we are only D_ATTACHING yet,
+ * we can (and should) go directly to D_DISKLESS. */
+ if (ns.disk == D_FAILED && os.disk == D_ATTACHING)
+ ns.disk = D_DISKLESS;
+
/* After C_DISCONNECTING only C_STANDALONE may follow */
if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
ns.conn = os.conn;
!test_and_set_bit(CONFIG_PENDING, &mdev->flags))
set_bit(DEVICE_DYING, &mdev->flags);
- mdev->state.i = ns.i;
+ /* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference
+ * on the ldev here, to be sure the transition -> D_DISKLESS resp.
+ * drbd_ldev_destroy() won't happen before our corresponding
+ * after_state_ch works run, where we put_ldev again. */
+ if ((os.disk != D_FAILED && ns.disk == D_FAILED) ||
+ (os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
+ atomic_inc(&mdev->local_cnt);
+
+ mdev->state = ns;
wake_up(&mdev->misc_wait);
wake_up(&mdev->state_wait);
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
- drbd_md_sync(mdev);
}
spin_lock_irq(&mdev->req_lock);
_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
- /* first half of local IO error */
- if (os.disk > D_FAILED && ns.disk == D_FAILED) {
- enum drbd_io_error_p eh = EP_PASS_ON;
+ /* first half of local IO error, failure to attach,
+ * or administrative detach */
+ if (os.disk != D_FAILED && ns.disk == D_FAILED) {
+ enum drbd_io_error_p eh;
+ int was_io_error;
+ /* corresponding get_ldev was in __drbd_set_state, to serialize
+ * our cleanup here with the transition to D_DISKLESS,
+ * so it is safe to dreference ldev here. */
+ eh = mdev->ldev->dc.on_io_error;
+ was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
+
+ /* current state still has to be D_FAILED,
+ * there is only one way out: to D_DISKLESS,
+ * and that may only happen after our put_ldev below. */
+ if (mdev->state.disk != D_FAILED)
+ dev_err(DEV,
+ "ASSERT FAILED: disk is %s during detach\n",
+ drbd_disk_str(mdev->state.disk));
if (drbd_send_state(mdev))
- dev_warn(DEV, "Notified peer that my disk is broken.\n");
+ dev_warn(DEV, "Notified peer that I am detaching my disk\n");
else
- dev_err(DEV, "Sending state for drbd_io_error() failed\n");
+ dev_err(DEV, "Sending state for detaching disk failed\n");
drbd_rs_cancel_all(mdev);
- if (get_ldev_if_state(mdev, D_FAILED)) {
- eh = mdev->ldev->dc.on_io_error;
- put_ldev(mdev);
- }
- if (eh == EP_CALL_HELPER)
+ /* In case we want to get something to stable storage still,
+ * this may be the last chance.
+ * Following put_ldev may transition to D_DISKLESS. */
+ drbd_md_sync(mdev);
+ put_ldev(mdev);
+
+ if (was_io_error && eh == EP_CALL_HELPER)
drbd_khelper(mdev, "local-io-error");
}
+ /* second half of local IO error, failure to attach,
+ * or administrative detach,
+ * after local_cnt references have reached zero again */
+ if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) {
+ /* We must still be diskless,
+ * re-attach has to be serialized with this! */
+ if (mdev->state.disk != D_DISKLESS)
+ dev_err(DEV,
+ "ASSERT FAILED: disk is %s while going diskless\n",
+ drbd_disk_str(mdev->state.disk));
- /* second half of local IO error handling,
- * after local_cnt references have reached zero: */
- if (os.disk == D_FAILED && ns.disk == D_DISKLESS) {
- mdev->rs_total = 0;
- mdev->rs_failed = 0;
- atomic_set(&mdev->rs_pending_cnt, 0);
- }
-
- if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
- /* We must still be diskless,
- * re-attach has to be serialized with this! */
- if (mdev->state.disk != D_DISKLESS)
- dev_err(DEV,
- "ASSERT FAILED: disk is %s while going diskless\n",
- drbd_disk_str(mdev->state.disk));
+ mdev->rs_total = 0;
+ mdev->rs_failed = 0;
+ atomic_set(&mdev->rs_pending_cnt, 0);
- /* we cannot assert local_cnt == 0 here, as get_ldev_if_state
- * will inc/dec it frequently. Since we became D_DISKLESS, no
- * one has touched the protected members anymore, though, so we
- * are safe to free them here. */
if (drbd_send_state(mdev))
- dev_warn(DEV, "Notified peer that I detached my disk.\n");
+ dev_warn(DEV, "Notified peer that I'm now diskless.\n");
else
- dev_err(DEV, "Sending state for detach failed\n");
-
- lc_destroy(mdev->resync);
- mdev->resync = NULL;
- lc_destroy(mdev->act_log);
- mdev->act_log = NULL;
- __no_warn(local,
- drbd_free_bc(mdev->ldev);
- mdev->ldev = NULL;);
-
- if (mdev->md_io_tmpp) {
- __free_page(mdev->md_io_tmpp);
- mdev->md_io_tmpp = NULL;
- }
+ dev_err(DEV, "Sending state for being diskless failed\n");
+ /* corresponding get_ldev in __drbd_set_state
+ * this may finaly trigger drbd_ldev_destroy. */
+ put_ldev(mdev);
}
/* Disks got bigger while they were detached */
drbd_set_defaults(mdev);
- /* for now, we do NOT yet support it,
- * even though we start some framework
- * to eventually support barriers */
- set_bit(NO_BARRIER_SUPP, &mdev->flags);
-
atomic_set(&mdev->ap_bio_cnt, 0);
atomic_set(&mdev->ap_pending_cnt, 0);
atomic_set(&mdev->rs_pending_cnt, 0);
drbd_thread_init(mdev, &mdev->asender, drbd_asender);
mdev->agreed_pro_version = PRO_VERSION_MAX;
- mdev->write_ordering = WO_bio_barrier;
+ mdev->write_ordering = WO_bdev_flush;
mdev->resync_wenr = LC_FREE;
}
D_ASSERT(list_empty(&mdev->resync_work.list));
D_ASSERT(list_empty(&mdev->unplug_work.list));
D_ASSERT(list_empty(&mdev->go_diskless.list));
-
}
get_random_bytes(&val, sizeof(u64));
_drbd_uuid_set(mdev, UI_CURRENT, val);
+ /* get it to stable storage _now_ */
+ drbd_md_sync(mdev);
}
void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
return 1;
}
+void drbd_ldev_destroy(struct drbd_conf *mdev)
+{
+ lc_destroy(mdev->resync);
+ mdev->resync = NULL;
+ lc_destroy(mdev->act_log);
+ mdev->act_log = NULL;
+ __no_warn(local,
+ drbd_free_bc(mdev->ldev);
+ mdev->ldev = NULL;);
+
+ if (mdev->md_io_tmpp) {
+ __free_page(mdev->md_io_tmpp);
+ mdev->md_io_tmpp = NULL;
+ }
+ clear_bit(GO_DISKLESS, &mdev->flags);
+}
+
static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused)
{
D_ASSERT(mdev->state.disk == D_FAILED);
/* we cannot assert local_cnt == 0 here, as get_ldev_if_state will
* inc/dec it frequently. Once we are D_DISKLESS, no one will touch
- * the protected members anymore, though, so in the after_state_ch work
- * it will be safe to free them. */
+ * the protected members anymore, though, so once put_ldev reaches zero
+ * again, it will be safe to free them. */
drbd_force_state(mdev, NS(disk, D_DISKLESS));
- /* We need to wait for return of references checked out while we still
- * have been D_FAILED, though (drbd_md_sync, bitmap io). */
- wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
-
- clear_bit(GO_DISKLESS, &mdev->flags);
return 1;
}
D_ASSERT(mdev->state.disk == D_FAILED);
if (!test_and_set_bit(GO_DISKLESS, &mdev->flags))
drbd_queue_work(&mdev->data.work, &mdev->go_diskless);
- /* don't drbd_queue_work_front,
- * we need to serialize with the after_state_ch work
- * of the -> D_FAILED transition. */
}
/**
retcode = ERR_DISK_CONFIGURED;
goto fail;
}
+ /* It may just now have detached because of IO error. Make sure
+ * drbd_ldev_destroy is done already, we may end up here very fast,
+ * e.g. if someone calls attach from the on-io-error handler,
+ * to realize a "hot spare" feature (not that I'd recommend that) */
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
/* allocation not in the IO path, cqueue thread context */
nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
/* Reset the "barriers don't work" bits here, then force meta data to
* be written, to ensure we determine if barriers are supported. */
if (nbc->dc.no_md_flush)
- set_bit(MD_NO_BARRIER, &mdev->flags);
+ set_bit(MD_NO_FUA, &mdev->flags);
else
- clear_bit(MD_NO_BARRIER, &mdev->flags);
+ clear_bit(MD_NO_FUA, &mdev->flags);
/* Point of no return reached.
* Devices and memory are no longer released by error cleanup below.
nbc = NULL;
resync_lru = NULL;
- mdev->write_ordering = WO_bio_barrier;
- drbd_bump_write_ordering(mdev, WO_bio_barrier);
+ mdev->write_ordering = WO_bdev_flush;
+ drbd_bump_write_ordering(mdev, WO_bdev_flush);
if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
set_bit(CRASHED_PRIMARY, &mdev->flags);
force_diskless_dec:
put_ldev(mdev);
force_diskless:
- drbd_force_state(mdev, NS(disk, D_DISKLESS));
+ drbd_force_state(mdev, NS(disk, D_FAILED));
drbd_md_sync(mdev);
release_bdev2_fail:
if (nbc)
return 0;
}
+/* Detaching the disk is a process in multiple stages. First we need to lock
+ * out application IO, in-flight IO, IO stuck in drbd_al_begin_io.
+ * Then we transition to D_DISKLESS, and wait for put_ldev() to return all
+ * internal references as well.
+ * Only then we have finally detached. */
static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
struct drbd_nl_cfg_reply *reply)
{
+ drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */
reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
+ if (mdev->state.disk == D_DISKLESS)
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
+ drbd_resume_io(mdev);
return 0;
}
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
- drbd_md_sync(mdev);
}
drbd_suspend_io(mdev);
reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0));
[WO_none] = 'n',
[WO_drain_io] = 'd',
[WO_bdev_flush] = 'f',
- [WO_bio_barrier] = 'b',
};
seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
#include "drbd_vli.h"
-struct flush_work {
- struct drbd_work w;
- struct drbd_epoch *epoch;
-};
-
enum finish_epoch {
FE_STILL_LIVE,
FE_DESTROYED,
static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
-static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
-{
- struct drbd_epoch *prev;
- spin_lock(&mdev->epoch_lock);
- prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
- if (prev == epoch || prev == mdev->current_epoch)
- prev = NULL;
- spin_unlock(&mdev->epoch_lock);
- return prev;
-}
#define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN)
return TRUE;
}
-static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+static void drbd_flush(struct drbd_conf *mdev)
{
int rv;
}
put_ldev(mdev);
}
-
- return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-}
-
-static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- struct flush_work *fw = (struct flush_work *)w;
- struct drbd_epoch *epoch = fw->epoch;
-
- kfree(w);
-
- if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
- drbd_flush_after_epoch(mdev, epoch);
-
- drbd_may_finish_epoch(mdev, epoch, EV_PUT |
- (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
-
- return 1;
}
/**
struct drbd_epoch *epoch,
enum epoch_event ev)
{
- int finish, epoch_size;
+ int epoch_size;
struct drbd_epoch *next_epoch;
- int schedule_flush = 0;
enum finish_epoch rv = FE_STILL_LIVE;
spin_lock(&mdev->epoch_lock);
do {
next_epoch = NULL;
- finish = 0;
epoch_size = atomic_read(&epoch->epoch_size);
break;
case EV_GOT_BARRIER_NR:
set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
-
- /* Special case: If we just switched from WO_bio_barrier to
- WO_bdev_flush we should not finish the current epoch */
- if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
- mdev->write_ordering != WO_bio_barrier &&
- epoch == mdev->current_epoch)
- clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
- break;
- case EV_BARRIER_DONE:
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
break;
case EV_BECAME_LAST:
/* nothing to do*/
if (epoch_size != 0 &&
atomic_read(&epoch->active) == 0 &&
- test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
- epoch->list.prev == &mdev->current_epoch->list &&
- !test_bit(DE_IS_FINISHING, &epoch->flags)) {
- /* Nearly all conditions are met to finish that epoch... */
- if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
- mdev->write_ordering == WO_none ||
- (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
- ev & EV_CLEANUP) {
- finish = 1;
- set_bit(DE_IS_FINISHING, &epoch->flags);
- } else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
- mdev->write_ordering == WO_bio_barrier) {
- atomic_inc(&epoch->active);
- schedule_flush = 1;
- }
- }
- if (finish) {
+ test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) {
if (!(ev & EV_CLEANUP)) {
spin_unlock(&mdev->epoch_lock);
drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
/* atomic_set(&epoch->active, 0); is already zero */
if (rv == FE_STILL_LIVE)
rv = FE_RECYCLED;
+ wake_up(&mdev->ee_wait);
}
}
spin_unlock(&mdev->epoch_lock);
- if (schedule_flush) {
- struct flush_work *fw;
- fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
- if (fw) {
- fw->w.cb = w_flush;
- fw->epoch = epoch;
- drbd_queue_work(&mdev->data.work, &fw->w);
- } else {
- dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
- /* That is not a recursion, only one level */
- drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
- drbd_may_finish_epoch(mdev, epoch, EV_PUT);
- }
- }
-
return rv;
}
[WO_none] = "none",
[WO_drain_io] = "drain",
[WO_bdev_flush] = "flush",
- [WO_bio_barrier] = "barrier",
};
pwo = mdev->write_ordering;
wo = min(pwo, wo);
- if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
- wo = WO_bdev_flush;
if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
wo = WO_drain_io;
if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
wo = WO_none;
mdev->write_ordering = wo;
- if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
+ if (pwo != mdev->write_ordering || wo == WO_bdev_flush)
dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
}
bio->bi_sector = sector;
bio->bi_bdev = mdev->ldev->backing_bdev;
/* we special case some flags in the multi-bio case, see below
- * (REQ_UNPLUG, REQ_HARDBARRIER) */
+ * (REQ_UNPLUG) */
bio->bi_rw = rw;
bio->bi_private = e;
bio->bi_end_io = drbd_endio_sec;
bio->bi_rw &= ~REQ_UNPLUG;
drbd_generic_make_request(mdev, fault_type, bio);
-
- /* strip off REQ_HARDBARRIER,
- * unless it is the first or last bio */
- if (bios && bios->bi_next)
- bios->bi_rw &= ~REQ_HARDBARRIER;
} while (bios);
maybe_kick_lo(mdev);
return 0;
return -ENOMEM;
}
-/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
- * @mdev: DRBD device.
- * @w: work object.
- * @cancel: The connection will be closed anyways (unused in this callback)
- */
-int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
-{
- struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
- /* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
- (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
- so that we can finish that epoch in drbd_may_finish_epoch().
- That is necessary if we already have a long chain of Epochs, before
- we realize that REQ_HARDBARRIER is actually not supported */
-
- /* As long as the -ENOTSUPP on the barrier is reported immediately
- that will never trigger. If it is reported late, we will just
- print that warning and continue correctly for all future requests
- with WO_bdev_flush */
- if (previous_epoch(mdev, e->epoch))
- dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
-
- /* we still have a local reference,
- * get_ldev was done in receive_Data. */
-
- e->w.cb = e_end_block;
- if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) {
- /* drbd_submit_ee fails for one reason only:
- * if was not able to allocate sufficient bios.
- * requeue, try again later. */
- e->w.cb = w_e_reissue;
- drbd_queue_work(&mdev->data.work, &e->w);
- }
- return 1;
-}
-
static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size)
{
- int rv, issue_flush;
+ int rv;
struct p_barrier *p = &mdev->data.rbuf.barrier;
struct drbd_epoch *epoch;
* Therefore we must send the barrier_ack after the barrier request was
* completed. */
switch (mdev->write_ordering) {
- case WO_bio_barrier:
case WO_none:
if (rv == FE_RECYCLED)
return TRUE;
- break;
+
+ /* receiver context, in the writeout path of the other node.
+ * avoid potential distributed deadlock */
+ epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+ if (epoch)
+ break;
+ else
+ dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
+ /* Fall through */
case WO_bdev_flush:
case WO_drain_io:
- if (rv == FE_STILL_LIVE) {
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
- drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
- }
- if (rv == FE_RECYCLED)
- return TRUE;
-
- /* The asender will send all the ACKs and barrier ACKs out, since
- all EEs moved from the active_ee to the done_ee. We need to
- provide a new epoch object for the EEs that come in soon */
- break;
- }
-
- /* receiver context, in the writeout path of the other node.
- * avoid potential distributed deadlock */
- epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
- if (!epoch) {
- dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
- issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- if (issue_flush) {
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
- if (rv == FE_RECYCLED)
- return TRUE;
+ drbd_flush(mdev);
+
+ if (atomic_read(&mdev->current_epoch->epoch_size)) {
+ epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+ if (epoch)
+ break;
}
- drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
+ epoch = mdev->current_epoch;
+ wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0);
+
+ D_ASSERT(atomic_read(&epoch->active) == 0);
+ D_ASSERT(epoch->flags == 0);
return TRUE;
+ default:
+ dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering);
+ return FALSE;
}
epoch->flags = 0;
{
struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
sector_t sector = e->sector;
- struct drbd_epoch *epoch;
int ok = 1, pcmd;
- if (e->flags & EE_IS_BARRIER) {
- epoch = previous_epoch(mdev, e->epoch);
- if (epoch)
- drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
- }
-
if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
if (likely((e->flags & EE_WAS_ERROR) == 0)) {
pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
e->epoch = mdev->current_epoch;
atomic_inc(&e->epoch->epoch_size);
atomic_inc(&e->epoch->active);
-
- if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
- struct drbd_epoch *epoch;
- /* Issue a barrier if we start a new epoch, and the previous epoch
- was not a epoch containing a single request which already was
- a Barrier. */
- epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
- if (epoch == e->epoch) {
- set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= REQ_HARDBARRIER;
- e->flags |= EE_IS_BARRIER;
- } else {
- if (atomic_read(&epoch->epoch_size) > 1 ||
- !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
- set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= REQ_HARDBARRIER;
- e->flags |= EE_IS_BARRIER;
- }
- }
- }
spin_unlock(&mdev->epoch_lock);
dp_flags = be32_to_cpu(p->dp_flags);
break;
}
- if (mdev->state.pdsk == D_DISKLESS) {
+ if (mdev->state.pdsk < D_INCONSISTENT) {
/* In case we have the only disk of the cluster, */
drbd_set_out_of_sync(mdev, e->sector, e->size);
e->flags |= EE_CALL_AL_COMPLETE_IO;
+ e->flags &= ~EE_MAY_SET_IN_SYNC;
drbd_al_begin_io(mdev, e->sector);
}
if (ns.conn == C_MASK) {
ns.conn = C_CONNECTED;
if (mdev->state.disk == D_NEGOTIATING) {
- drbd_force_state(mdev, NS(disk, D_DISKLESS));
+ drbd_force_state(mdev, NS(disk, D_FAILED));
} else if (peer_state.disk == D_NEGOTIATING) {
dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
peer_state.disk = D_DISKLESS;
if (!hlist_unhashed(&req->colision))
hlist_del(&req->colision);
else
- D_ASSERT((s & RQ_NET_MASK) == 0);
+ D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
/* for writes we need to do some extra housekeeping */
if (rw == WRITE)
mdev->state.conn >= C_CONNECTED));
if (!(local || remote) && !is_susp(mdev->state)) {
- dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+ if (__ratelimit(&drbd_ratelimit_state))
+ dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
goto fail_free_complete;
}
if (local) {
req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
- if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
- : rw == READ ? DRBD_FAULT_DT_RD
- : DRBD_FAULT_DT_RA))
+ /* State may have changed since we grabbed our reference on the
+ * mdev->ldev member. Double check, and short-circuit to endio.
+ * In case the last activity log transaction failed to get on
+ * stable storage, and this is a WRITE, we may not even submit
+ * this bio. */
+ if (get_ldev(mdev)) {
+ if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
+ : rw == READ ? DRBD_FAULT_DT_RD
+ : DRBD_FAULT_DT_RA))
+ bio_endio(req->private_bio, -EIO);
+ else
+ generic_make_request(req->private_bio);
+ put_ldev(mdev);
+ } else
bio_endio(req->private_bio, -EIO);
- else
- generic_make_request(req->private_bio);
}
/* we need to plug ALWAYS since we possibly need to kick lo_dev.
return 0;
}
- /* Reject barrier requests if we know the underlying device does
- * not support them.
- * XXX: Need to get this info from peer as well some how so we
- * XXX: reject if EITHER side/data/metadata area does not support them.
- *
- * because of those XXX, this is not yet enabled,
- * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
- */
- if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
- /* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
- }
-
/*
* what we "blindly" assume:
*/
put_ldev(mdev);
}
-static int is_failed_barrier(int ee_flags)
-{
- return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED))
- == (EE_IS_BARRIER|EE_WAS_ERROR);
-}
-
/* writes on behalf of the partner, or resync writes,
* "submitted" by the receiver, final stage. */
static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local)
int is_syncer_req;
int do_al_complete_io;
- /* if this is a failed barrier request, disable use of barriers,
- * and schedule for resubmission */
- if (is_failed_barrier(e->flags)) {
- drbd_bump_write_ordering(mdev, WO_bdev_flush);
- spin_lock_irqsave(&mdev->req_lock, flags);
- list_del(&e->w.list);
- e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED;
- e->w.cb = w_e_reissue;
- /* put_ldev actually happens below, once we come here again. */
- __release(local);
- spin_unlock_irqrestore(&mdev->req_lock, flags);
- drbd_queue_work(&mdev->data.work, &e->w);
- return;
- }
-
D_ASSERT(e->block_id != ID_VACANT);
/* after we moved e to done_ee,
drbd_md_sync(mdev);
if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
- dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
+ dev_info(DEV, "Writing the whole bitmap\n");
drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
}
out_put_disk:
while (dr--) {
del_timer(&motor_off_timer[dr]);
- put_disk(disks[dr]);
if (disks[dr]->queue)
blk_cleanup_queue(disks[dr]->queue);
+ put_disk(disks[dr]);
}
return err;
}
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
}
- put_disk(disks[drive]);
blk_cleanup_queue(disks[drive]->queue);
+ put_disk(disks[drive]);
}
del_timer_sync(&fd_timeout);
if (bio_rw(bio) == WRITE) {
struct file *file = lo->lo_backing_file;
- /* REQ_HARDBARRIER is deprecated */
- if (bio->bi_rw & REQ_HARDBARRIER) {
- ret = -EOPNOTSUPP;
- goto out;
- }
-
if (bio->bi_rw & REQ_FLUSH) {
ret = vfs_fsync(file, 0);
if (unlikely(ret && ret != -EINVAL)) {
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
- if (req->cmd_flags & REQ_HARDBARRIER)
- ring_req->operation = BLKIF_OP_WRITE_BARRIER;
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
/* Apple MacBookPro6,2 */
{ USB_DEVICE(0x05ac, 0x8218) },
+ /* Apple MacBookAir3,1, MacBookAir3,2 */
+ { USB_DEVICE(0x05ac, 0x821b) },
+
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
usb_set_intfdata(intf, data);
+ usb_enable_autosuspend(interface_to_usbdev(intf));
+
return 0;
}
# Makefile for the kernel character device drivers.
#
-#
-# This file contains the font map for the default (hardware) font
-#
-FONTMAPFILE = cp437.uni
-
-obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
-
-obj-y += tty_mutex.o
-obj-$(CONFIG_LEGACY_PTYS) += pty.o
-obj-$(CONFIG_UNIX98_PTYS) += pty.o
+obj-y += mem.o random.o
obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
-obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
-obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
-obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
-obj-$(CONFIG_AUDIT) += tty_audit.o
-obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_SYNCLINK) += synclink.o
obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
-obj-$(CONFIG_N_HDLC) += n_hdlc.o
-obj-$(CONFIG_N_GSM) += n_gsm.o
obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
obj-$(CONFIG_APM_EMULATION) += apm-emulation.o
obj-$(CONFIG_DTLK) += dtlk.o
-obj-$(CONFIG_R3964) += n_r3964.o
obj-$(CONFIG_APPLICOM) += applicom.o
obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_RTC) += rtc.o
obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
-
-# Files generated that shall be removed upon make clean
-clean-files := consolemap_deftbl.c defkeymap.c
-
-quiet_cmd_conmk = CONMK $@
- cmd_conmk = scripts/conmakehash $< > $@
-
-$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
- $(call cmd,conmk)
-
-$(obj)/defkeymap.o: $(obj)/defkeymap.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
- loadkeys --mktable $< > $@.tmp
- sed -e 's/^static *//' $@.tmp > $@
- rm $@.tmp
-
-endif
unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
u32 pte_flags;
- if (type_mask == AGP_USER_UNCACHED_MEMORY)
+ if (type_mask == AGP_USER_MEMORY)
pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
- pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
} else { /* set 'normal'/'cached' to LLC by default */
- pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
}
{
struct async_struct * info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct icount;
void __user *argp = (void __user *)arg;
unsigned long flags;
int eax = regs->eax;
#if defined(CONFIG_X86_64)
- asm("pushq %%rax\n\t"
+ asm volatile("pushq %%rax\n\t"
"movl 0(%%rax),%%edx\n\t"
"pushq %%rdx\n\t"
"movl 4(%%rax),%%ebx\n\t"
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#else
- asm("pushl %%eax\n\t"
+ asm volatile("pushl %%eax\n\t"
"movl 0(%%eax),%%edx\n\t"
"push %%edx\n\t"
"movl 4(%%eax),%%ebx\n\t"
"movl %%edx,0(%%eax)\n\t"
"lahf\n\t"
"shrl $8,%%eax\n\t"
- "andl $1,%%eax\n":"=a"(rc)
+ "andl $1,%%eax\n"
+ :"=a"(rc)
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#endif
unsigned int cmd, unsigned long arg)
{
struct port *port = tty->driver_data;
- void __user *argp = (void __user *)arg;
int rval = -ENOIOCTLCMD;
DBG1("******** IOCTL, cmd: %d", cmd);
if (dev->flags0 & 1) {
set_bit(IS_CMM_ABSENT, &dev->flags);
rc = -ENODEV;
+ } else {
+ rc = -EIO;
}
- rc = -EIO;
goto release_io;
}
.hangup = mgslpc_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = mgslpc_get_icount,
.proc_fops = &mgslpc_proc_fops,
};
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, "cmt_fck");
if (IS_ERR(p->clk)) {
- dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
- p->clk = clk_get(&p->pdev->dev, cfg->clk);
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "cannot get clock\n");
- ret = PTR_ERR(p->clk);
- goto err1;
- }
+ dev_err(&p->pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(p->clk);
+ goto err1;
}
if (resource_size(res) == 6) {
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, "mtu2_fck");
if (IS_ERR(p->clk)) {
- dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
- p->clk = clk_get(&p->pdev->dev, cfg->clk);
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "cannot get clock\n");
- ret = PTR_ERR(p->clk);
- goto err1;
- }
+ dev_err(&p->pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(p->clk);
+ goto err1;
}
return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, "tmu_fck");
if (IS_ERR(p->clk)) {
- dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
- p->clk = clk_get(&p->pdev->dev, cfg->clk);
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "cannot get clock\n");
- ret = PTR_ERR(p->clk);
- goto err1;
- }
+ dev_err(&p->pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(p->clk);
+ goto err1;
}
return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
return -ENODEV;
ino = mdesc_get_property(mdesc, node, "ino", &ino_len);
- if (!intr)
+ if (!ino)
return -ENODEV;
if (intr_len != ino_len)
if (initial)
asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */
: "+S" (input), "+D" (output), "+a" (iv)
- : "d" (control_word), "b" (key), "c" (count));
+ : "d" (control_word), "b" (key), "c" (initial));
asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */
: "+S" (input), "+D" (output), "+a" (iv)
return ret;
}
-static int ar_context_add_page(struct ar_context *ctx)
+static void ar_context_link_page(struct ar_context *ctx,
+ struct ar_buffer *ab, dma_addr_t ab_bus)
{
- struct device *dev = ctx->ohci->card.device;
- struct ar_buffer *ab;
- dma_addr_t uninitialized_var(ab_bus);
size_t offset;
- ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
- if (ab == NULL)
- return -ENOMEM;
-
ab->next = NULL;
memset(&ab->descriptor, 0, sizeof(ab->descriptor));
ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
flush_writes(ctx->ohci);
+}
+
+static int ar_context_add_page(struct ar_context *ctx)
+{
+ struct device *dev = ctx->ohci->card.device;
+ struct ar_buffer *ab;
+ dma_addr_t uninitialized_var(ab_bus);
+
+ ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
+ if (ab == NULL)
+ return -ENOMEM;
+
+ ar_context_link_page(ctx, ab, ab_bus);
return 0;
}
static void ar_context_tasklet(unsigned long data)
{
struct ar_context *ctx = (struct ar_context *)data;
- struct fw_ohci *ohci = ctx->ohci;
struct ar_buffer *ab;
struct descriptor *d;
void *buffer, *end;
+ __le16 res_count;
ab = ctx->current_buffer;
d = &ab->descriptor;
- if (d->res_count == 0) {
- size_t size, rest, offset;
+ res_count = ACCESS_ONCE(d->res_count);
+ if (res_count == 0) {
+ size_t size, size2, rest, pktsize, size3, offset;
dma_addr_t start_bus;
void *start;
*/
offset = offsetof(struct ar_buffer, data);
- start = buffer = ab;
+ start = ab;
start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+ buffer = ab->data;
ab = ab->next;
d = &ab->descriptor;
- size = buffer + PAGE_SIZE - ctx->pointer;
+ size = start + PAGE_SIZE - ctx->pointer;
+ /* valid buffer data in the next page */
rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
+ /* what actually fits in this page */
+ size2 = min(rest, (size_t)PAGE_SIZE - offset - size);
memmove(buffer, ctx->pointer, size);
- memcpy(buffer + size, ab->data, rest);
- ctx->current_buffer = ab;
- ctx->pointer = (void *) ab->data + rest;
- end = buffer + size + rest;
+ memcpy(buffer + size, ab->data, size2);
+
+ while (size > 0) {
+ void *next = handle_ar_packet(ctx, buffer);
+ pktsize = next - buffer;
+ if (pktsize >= size) {
+ /*
+ * We have handled all the data that was
+ * originally in this page, so we can now
+ * continue in the next page.
+ */
+ buffer = next;
+ break;
+ }
+ /* move the next packet to the start of the buffer */
+ memmove(buffer, next, size + size2 - pktsize);
+ size -= pktsize;
+ /* fill up this page again */
+ size3 = min(rest - size2,
+ (size_t)PAGE_SIZE - offset - size - size2);
+ memcpy(buffer + size + size2,
+ (void *) ab->data + size2, size3);
+ size2 += size3;
+ }
- while (buffer < end)
- buffer = handle_ar_packet(ctx, buffer);
+ if (rest > 0) {
+ /* handle the packets that are fully in the next page */
+ buffer = (void *) ab->data +
+ (buffer - (start + offset + size));
+ end = (void *) ab->data + rest;
+
+ while (buffer < end)
+ buffer = handle_ar_packet(ctx, buffer);
- dma_free_coherent(ohci->card.device, PAGE_SIZE,
- start, start_bus);
- ar_context_add_page(ctx);
+ ctx->current_buffer = ab;
+ ctx->pointer = end;
+
+ ar_context_link_page(ctx, start, start_bus);
+ } else {
+ ctx->pointer = start + PAGE_SIZE;
+ }
} else {
buffer = ctx->pointer;
ctx->pointer = end =
- (void *) ab + PAGE_SIZE - le16_to_cpu(d->res_count);
+ (void *) ab + PAGE_SIZE - le16_to_cpu(res_count);
while (buffer < end)
buffer = handle_ar_packet(ctx, buffer);
struct drm_crtc *tmp;
int crtc_mask = 1;
- WARN(!crtc, "checking null crtc?");
+ WARN(!crtc, "checking null crtc?\n");
dev = crtc->dev;
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
- .buf = buf + start,
+ .buf = buf,
}
};
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
- int i, j = 0;
+ int i, j = 0, valid_extensions = 0;
u8 *block, *new;
if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
for (j = 1; j <= block[0x7e]; j++) {
for (i = 0; i < 4; i++) {
- if (drm_do_probe_ddc_edid(adapter, block, j,
- EDID_LENGTH))
+ if (drm_do_probe_ddc_edid(adapter,
+ block + (valid_extensions + 1) * EDID_LENGTH,
+ j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + j * EDID_LENGTH))
+ if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+ valid_extensions++;
break;
+ }
}
if (i == 4)
- goto carp;
+ dev_warn(connector->dev->dev,
+ "%s: Ignoring invalid EDID block %d.\n",
+ drm_get_connector_name(connector), j);
+ }
+
+ if (valid_extensions != block[0x7e]) {
+ block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+ block[0x7e] = valid_extensions;
+ new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+ if (!new)
+ goto out;
+ block = new;
}
return block;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
-module_param_named(powersave, i915_powersave, int, 0400);
+module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
static int i915_ring_idle(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
- if (list_empty(&ring->gpu_write_list))
+ if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
i915_gem_flush_ring(dev, NULL, ring,
int ret;
lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return 0;
* write domain
*/
if (obj->write_domain &&
- obj->write_domain != obj->pending_read_domains) {
+ (obj->write_domain != obj->pending_read_domains ||
+ obj_priv->ring != ring)) {
flush_domains |= obj->write_domain;
invalidate_domains |=
obj->pending_read_domains & ~obj->write_domain;
return 0;
}
+static int
+i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
+ struct drm_file *file,
+ struct intel_ring_buffer *ring,
+ struct drm_gem_object **objects,
+ int count)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret, i;
+
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+ dev_priv->mm.flush_rings = 0;
+ for (i = 0; i < count; i++)
+ i915_gem_object_set_to_gpu_domain(objects[i], ring);
+
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev, file,
+ dev->invalidate_domains,
+ dev->flush_domains,
+ dev_priv->mm.flush_rings);
+ }
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
+ /* XXX replace with semaphores */
+ if (obj->ring && ring != obj->ring) {
+ ret = i915_gem_object_wait_rendering(&obj->base, true);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
goto err;
}
- /* Zero the global flush/invalidate flags. These
- * will be modified as new domains are computed
- * for each object
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- dev_priv->mm.flush_rings = 0;
-
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_gem_object *obj = object_list[i];
-
- /* Compute new gpu domains and update invalidate/flush */
- i915_gem_object_set_to_gpu_domain(obj, ring);
- }
-
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev, file,
- dev->invalidate_domains,
- dev->flush_domains,
- dev_priv->mm.flush_rings);
- }
+ ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
+ object_list, args->buffer_count);
+ if (ret)
+ goto err;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
alignment = i915_gem_get_gtt_alignment(obj);
if (obj_priv->gtt_offset & (alignment - 1)) {
WARN(obj_priv->pin_count,
- "bo is already pinned with incorrect alignment:"
- " offset=%x, req.alignment=%x\n",
+ "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
obj_priv->gtt_offset, alignment);
ret = i915_gem_object_unbind(obj);
if (ret)
struct drm_file *file_priv)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
- void *obj_addr;
- int ret;
- char __user *user_data;
+ void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
- user_data = (char __user *) (uintptr_t) args->data_ptr;
- obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
- DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
- ret = copy_from_user(obj_addr, user_data, args->size);
- if (ret)
- return -EFAULT;
+ if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+ unsigned long unwritten;
+
+ /* The physical object once assigned is fixed for the lifetime
+ * of the obj, so we can safely drop the lock and continue
+ * to access vaddr.
+ */
+ mutex_unlock(&dev->struct_mutex);
+ unwritten = copy_from_user(vaddr, user_data, args->size);
+ mutex_lock(&dev->struct_mutex);
+ if (unwritten)
+ return -EFAULT;
+ }
drm_agp_chipset_flush(dev);
return 0;
int lists_empty;
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list);
+ list_empty(&dev_priv->mm.active_list);
return !lists_empty;
}
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return -ENOSPC;
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
BUG_ON(!lists_empty);
return 0;
/* Clock gating state */
intel_init_clock_gating(dev);
- if (HAS_PCH_SPLIT(dev))
+ if (HAS_PCH_SPLIT(dev)) {
ironlake_enable_drps(dev);
+ intel_init_emon(dev);
+ }
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
udelay(500);
}
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* enable normal train */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE;
+ }
+ I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+ /* wait one idle pattern time */
+ POSTING_READ(reg);
+ udelay(1000);
+}
+
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
DRM_DEBUG_KMS("FDI train done\n");
- /* enable normal train */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_NORMAL_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE;
- }
- I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
- /* wait one idle pattern time */
- POSTING_READ(reg);
- udelay(1000);
}
static const int const snb_b_fdi_train_param [] = {
I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
+ intel_fdi_normal_train(crtc);
+
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
udelay(100);
/* Ironlake workaround, disable clock pointer after downing FDI */
- I915_WRITE(FDI_RX_CHICKEN(pipe),
- I915_READ(FDI_RX_CHICKEN(pipe) &
- ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
/* still set train pattern 1 */
reg = FDI_TX_CTL(pipe);
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
- fstart = fmax;
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
- dev_priv->fmax = fstart; /* IPS callback will increase this */
+ dev_priv->fmax = fmax; /* IPS callback will increase this */
dev_priv->fstart = fstart;
- dev_priv->max_delay = fmax;
+ dev_priv->max_delay = fstart;
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
- DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
- fstart);
+ DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+ fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
status = connector_status_connected;
}
- return bit;
+ return status;
}
/**
extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_gem_object *obj,
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
- if (intel_lvds->edid) {
- drm_mode_connector_update_edid_property(connector,
- intel_lvds->edid);
+ if (intel_lvds->edid)
return drm_add_edid_modes(connector, intel_lvds->edid);
- }
mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
if (mode == 0)
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
-
+ if (intel_lvds->edid) {
+ if (drm_add_edid_modes(connector,
+ intel_lvds->edid)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_lvds->edid);
+ } else {
+ kfree(intel_lvds->edid);
+ intel_lvds->edid = NULL;
+ }
+ }
if (!intel_lvds->edid) {
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
return 0;
err_out:
- iounmap(opregion->header);
+ iounmap(base);
return err;
}
{
int uv_hscale = uv_hsubsampling(rec->flags);
int uv_vscale = uv_vsubsampling(rec->flags);
- u32 stride_mask, depth, tmp;
+ u32 stride_mask;
+ int depth;
+ u32 tmp;
/* check src dimensions */
if (IS_845G(dev) || IS_I830(dev)) {
I915_WRITE_CTL(ring,
((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_NO_REPORT | RING_VALID);
+ | RING_REPORT_64K | RING_VALID);
head = I915_READ_HEAD(ring) & HEAD_ADDR;
/* If the head is still not zero, the ring is dead */
i915_gem_object_unpin(ring->gem_object);
drm_gem_object_unreference(ring->gem_object);
ring->gem_object = NULL;
+
+ if (ring->cleanup)
+ ring->cleanup(ring);
+
cleanup_status_page(dev, ring);
}
{
unsigned long end;
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 head;
+
+ head = intel_read_status_page(ring, 4);
+ if (head) {
+ ring->head = head & HEAD_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ if (ring->space >= n)
+ return 0;
+ }
trace_i915_ring_wait_begin (dev);
end = jiffies + 3 * HZ;
/* do nothing */
}
+
+/* Workaround for some stepping of SNB,
+ * each time when BLT engine ring tail moved,
+ * the first command in the ring to be parsed
+ * should be MI_BATCH_BUFFER_START
+ */
+#define NEED_BLT_WORKAROUND(dev) \
+ (IS_GEN6(dev) && (dev->pdev->revision < 8))
+
+static inline struct drm_i915_gem_object *
+to_blt_workaround(struct intel_ring_buffer *ring)
+{
+ return ring->private;
+}
+
+static int blt_ring_init(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ if (NEED_BLT_WORKAROUND(dev)) {
+ struct drm_i915_gem_object *obj;
+ u32 __iomem *ptr;
+ int ret;
+
+ obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
+ if (obj == NULL)
+ return -ENOMEM;
+
+ ret = i915_gem_object_pin(&obj->base, 4096);
+ if (ret) {
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ptr = kmap(obj->pages[0]);
+ iowrite32(MI_BATCH_BUFFER_END, ptr);
+ iowrite32(MI_NOOP, ptr+1);
+ kunmap(obj->pages[0]);
+
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
+ if (ret) {
+ i915_gem_object_unpin(&obj->base);
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ring->private = obj;
+ }
+
+ return init_ring_common(dev, ring);
+}
+
+static void blt_ring_begin(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ int num_dwords)
+{
+ if (ring->private) {
+ intel_ring_begin(dev, ring, num_dwords+2);
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
+ intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
+ } else
+ intel_ring_begin(dev, ring, 4);
+}
+
+static void blt_ring_flush(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
+{
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_FLUSH_DW);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_advance(dev, ring);
+}
+
+static u32
+blt_ring_add_request(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 flush_domains)
+{
+ u32 seqno = i915_gem_get_seqno(dev);
+
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+ intel_ring_emit(dev, ring,
+ I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ intel_ring_emit(dev, ring, seqno);
+ intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+ intel_ring_advance(dev, ring);
+
+ DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+ return seqno;
+}
+
+static void blt_ring_cleanup(struct intel_ring_buffer *ring)
+{
+ if (!ring->private)
+ return;
+
+ i915_gem_object_unpin(ring->private);
+ drm_gem_object_unreference(ring->private);
+ ring->private = NULL;
+}
+
static const struct intel_ring_buffer gen6_blt_ring = {
.name = "blt ring",
.id = RING_BLT,
.mmio_base = BLT_RING_BASE,
.size = 32 * PAGE_SIZE,
- .init = init_ring_common,
+ .init = blt_ring_init,
.write_tail = ring_write_tail,
- .flush = gen6_ring_flush,
- .add_request = ring_add_request,
+ .flush = blt_ring_flush,
+ .add_request = blt_ring_add_request,
.get_seqno = ring_status_page_get_seqno,
.user_irq_get = blt_ring_get_user_irq,
.user_irq_put = blt_ring_put_user_irq,
.dispatch_gem_execbuffer = gen6_ring_dispatch_gem_execbuffer,
+ .cleanup = blt_ring_cleanup,
};
int intel_init_render_ring_buffer(struct drm_device *dev)
struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset);
+ void (*cleanup)(struct intel_ring_buffer *ring);
/**
* List of objects currently involved in rendering from the
wait_queue_head_t irq_queue;
drm_local_map_t map;
+
+ void *private;
};
static inline u32
u32 grbm_int_cntl = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
case 0: /* D1 vblank */
if (disp_int & LB_D1_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D1_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D1 vblank\n");
case 0: /* D2 vblank */
if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D2 vblank\n");
case 0: /* D3 vblank */
if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 2);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D3 vblank\n");
case 0: /* D4 vblank */
if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 3);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D4 vblank\n");
case 0: /* D5 vblank */
if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 4);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D5 vblank\n");
case 0: /* D6 vblank */
if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 5);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D6 vblank\n");
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "R100 PCI GART already initialized.\n");
+ WARN(1, "R100 PCI GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
uint32_t tmp = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RV370 PCIE GART already initialized.\n");
+ WARN(1, "RV370 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
{
u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
- u32 actual_temp = 0;
- if ((temp >> 7) & 1)
- actual_temp = 0;
- else
- actual_temp = (temp >> 1) & 0xff;
-
- return actual_temp * 1000;
+ return temp * 1000;
}
void r600_pm_get_dynpm_state(struct radeon_device *rdev)
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "R600 PCIE GART already initialized.\n");
+ WARN(1, "R600 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
u32 hdmi1, hdmi2;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
if (crev < 2)
return false;
- router.valid = false;
-
obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
(ctx->bios + data_offset +
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
continue;
+ router.ddc_valid = false;
+ router.cd_valid = false;
for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
usDeviceTag));
} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
- router.valid = false;
for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
- u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+ u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID);
if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
(ctx->bios + data_offset +
ATOM_I2C_RECORD *i2c_record;
ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+ ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path;
ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
(ctx->bios + data_offset +
case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
record;
- router.valid = true;
- router.mux_type = ddc_path->ucMuxType;
- router.mux_control_pin = ddc_path->ucMuxControlPin;
- router.mux_state = ddc_path->ucMuxState[enum_id];
+ router.ddc_valid = true;
+ router.ddc_mux_type = ddc_path->ucMuxType;
+ router.ddc_mux_control_pin = ddc_path->ucMuxControlPin;
+ router.ddc_mux_state = ddc_path->ucMuxState[enum_id];
+ break;
+ case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE:
+ cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *)
+ record;
+ router.cd_valid = true;
+ router.cd_mux_type = cd_path->ucMuxType;
+ router.cd_mux_control_pin = cd_path->ucMuxControlPin;
+ router.cd_mux_state = cd_path->ucMuxState[enum_id];
break;
}
record = (ATOM_COMMON_RECORD_HEADER *)
size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
struct radeon_router router;
- router.valid = false;
+ router.ddc_valid = false;
+ router.cd_valid = false;
bios_connectors = kzalloc(bc_size, GFP_KERNEL);
if (!bios_connectors)
continue;
if (priority == true) {
- DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector));
conflict->status = connector_status_disconnected;
radeon_connector_update_scratch_regs(conflict, connector_status_disconnected);
} else {
- DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict));
current_status = connector_status_disconnected;
}
break;
mode->vdisplay == native_mode->vdisplay) {
*native_mode = *mode;
drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
- DRM_INFO("Determined LVDS native mode details from EDID\n");
+ DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n");
break;
}
}
}
if (!native_mode->clock) {
- DRM_INFO("No LVDS native mode details, disabling RMX\n");
+ DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n");
radeon_encoder->rmx_type = RMX_OFF;
}
}
radeon_connector->shared_ddc = true;
shared_ddc = true;
}
- if (radeon_connector->router_bus && router->valid &&
+ if (radeon_connector->router_bus && router->ddc_valid &&
(radeon_connector->router.router_id == router->router_id)) {
radeon_connector->shared_ddc = false;
shared_ddc = false;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
radeon_connector->router = *router;
- if (router->valid) {
+ if (router->ddc_valid || router->cd_valid) {
radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
if (!radeon_connector->router_bus)
goto failed;
radeon_connector->ddc_bus->rec.en_data_reg,
radeon_connector->ddc_bus->rec.y_clk_reg,
radeon_connector->ddc_bus->rec.y_data_reg);
- if (radeon_connector->router_bus)
+ if (radeon_connector->router.ddc_valid)
DRM_INFO(" DDC Router 0x%x/0x%x\n",
- radeon_connector->router.mux_control_pin,
- radeon_connector->router.mux_state);
+ radeon_connector->router.ddc_mux_control_pin,
+ radeon_connector->router.ddc_mux_state);
+ if (radeon_connector->router.cd_valid)
+ DRM_INFO(" Clock/Data Router 0x%x/0x%x\n",
+ radeon_connector->router.cd_mux_control_pin,
+ radeon_connector->router.cd_mux_state);
} else {
if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if (!radeon_connector->ddc_bus)
return -1;
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (radeon_encoder->active_device &
(ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
radeon_atom_output_lock(encoder, true);
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+ /* select the clock/data port if it uses a router */
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ if (radeon_connector->router.cd_valid)
+ radeon_router_select_cd_port(radeon_connector);
+ }
+
/* this is needed for the pll/ss setup to work correctly in some cases */
atombios_set_encoder_crtc_source(encoder);
}
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig;
+
+ /* check for pre-DCE3 cards with shared encoders;
+ * can't really use the links individually, so don't disable
+ * the encoder if it's in use by another connector
+ */
+ if (!ASIC_IS_DCE3(rdev)) {
+ struct drm_encoder *other_encoder;
+ struct radeon_encoder *other_radeon_encoder;
+
+ list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+ other_radeon_encoder = to_radeon_encoder(other_encoder);
+ if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+ drm_helper_encoder_in_use(other_encoder))
+ goto disable_done;
+ }
+ }
+
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
switch (radeon_encoder->encoder_id) {
break;
}
+disable_done:
if (radeon_encoder_is_digital(encoder)) {
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
r600_hdmi_disable(encoder);
*/
if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
/* good news we believe it's a lockup */
- WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq);
+ WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+ fence->seq, seq);
/* FIXME: what should we do ? marking everyone
* as signaled for now
*/
};
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
if (ret == 2)
addr, val);
}
-/* router switching */
-void radeon_router_select_port(struct radeon_connector *radeon_connector)
+/* ddc router switching */
+void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
{
u8 val;
- if (!radeon_connector->router.valid)
+ if (!radeon_connector->router.ddc_valid)
return;
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, &val);
- val &= radeon_connector->router.mux_control_pin;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, val);
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, &val);
- val &= radeon_connector->router.mux_control_pin;
- val |= radeon_connector->router.mux_state;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
+ val |= radeon_connector->router.ddc_mux_state;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, val);
+}
+
+/* clock/data router switching */
+void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
+{
+ u8 val;
+
+ if (!radeon_connector->router.cd_valid)
+ return;
+
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, val);
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ val |= radeon_connector->router.cd_mux_state;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, val);
};
struct radeon_router {
- bool valid;
u32 router_id;
struct radeon_i2c_bus_rec i2c_info;
u8 i2c_addr;
- u8 mux_type;
- u8 mux_control_pin;
- u8 mux_state;
+ /* i2c mux */
+ bool ddc_valid;
+ u8 ddc_mux_type;
+ u8 ddc_mux_control_pin;
+ u8 ddc_mux_state;
+ /* clock/data mux */
+ bool cd_valid;
+ u8 cd_mux_type;
+ u8 cd_mux_control_pin;
+ u8 cd_mux_state;
};
struct radeon_connector {
u8 slave_addr,
u8 addr,
u8 val);
-extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
type = ttm_bo_type_device;
}
*bo_ptr = NULL;
+
+retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
return -ENOMEM;
bo->gobj = gobj;
bo->surface_reg = -1;
INIT_LIST_HEAD(&bo->list);
-
-retry:
radeon_ttm_placement_from_domain(bo, domain);
/* Kernel allocation are uninterruptible */
mutex_lock(&rdev->vram_mutex);
gtt = container_of(backend, struct radeon_ttm_backend, backend);
gtt->offset = bo_mem->start << PAGE_SHIFT;
if (!gtt->num_pages) {
- WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+ WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
+ gtt->num_pages, bo_mem, backend);
}
r = radeon_gart_bind(gtt->rdev, gtt->offset,
gtt->num_pages, gtt->pages);
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "RS400 GART already initialized.\n");
+ WARN(1, "RS400 GART already initialized\n");
return 0;
}
/* Check gart size */
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RS600 GART already initialized.\n");
+ WARN(1, "RS600 GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
/*
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-/* Notes:
- *
- * We store bo pointer in drm_mm_node struct so we know which bo own a
- * specific node. There is no protection on the pointer, thus to make
- * sure things don't go berserk you have to access this pointer while
- * holding the global lru lock and make sure anytime you free a node you
- * reset the pointer to NULL.
- */
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include <linux/mm.h>
#include <linux/file.h>
#include <linux/module.h>
+#include <asm/atomic.h>
#define TTM_ASSERT_LOCKED(param)
#define TTM_DEBUG(fmt, arg...)
ttm_bo_mem_put(bo, &bo->mem);
atomic_set(&bo->reserved, 0);
+
+ /*
+ * Make processes trying to reserve really pick it up.
+ */
+ smp_mb__after_atomic_dec();
wake_up_all(&bo->event_queue);
}
struct ttm_bo_device *bdev = bo->bdev;
struct ttm_bo_global *glob = bo->glob;
struct ttm_bo_driver *driver;
- void *sync_obj;
+ void *sync_obj = NULL;
void *sync_obj_arg;
int put_count;
int ret;
spin_lock(&glob->lru_lock);
}
queue:
- sync_obj = bo->sync_obj;
- sync_obj_arg = bo->sync_obj_arg;
driver = bdev->driver;
+ if (bo->sync_obj)
+ sync_obj = driver->sync_obj_ref(bo->sync_obj);
+ sync_obj_arg = bo->sync_obj_arg;
kref_get(&bo->list_kref);
list_add_tail(&bo->ddestroy, &bdev->ddestroy);
spin_unlock(&glob->lru_lock);
spin_unlock(&bo->lock);
- if (sync_obj)
+ if (sync_obj) {
driver->sync_obj_flush(sync_obj, sync_obj_arg);
+ driver->sync_obj_unref(&sync_obj);
+ }
schedule_delayed_work(&bdev->wq,
((HZ / 100) < 1) ? 1 : HZ / 100);
}
bool no_wait_gpu)
{
struct ttm_bo_device *bdev = bo->bdev;
- struct ttm_bo_global *glob = bdev->glob;
struct ttm_mem_type_manager *man = &bdev->man[mem_type];
int ret;
return ret;
if (mem->mm_node)
break;
- spin_lock(&glob->lru_lock);
- if (list_empty(&man->lru)) {
- spin_unlock(&glob->lru_lock);
- break;
- }
- spin_unlock(&glob->lru_lock);
ret = ttm_mem_evict_first(bdev, mem_type, interruptible,
no_wait_reserve, no_wait_gpu);
if (unlikely(ret != 0))
int ttm_bo_check_placement(struct ttm_buffer_object *bo,
struct ttm_placement *placement)
{
- int i;
+ BUG_ON((placement->fpfn || placement->lpfn) &&
+ (bo->mem.num_pages > (placement->lpfn - placement->fpfn)));
- if (placement->fpfn || placement->lpfn) {
- if (bo->mem.num_pages > (placement->lpfn - placement->fpfn)) {
- printk(KERN_ERR TTM_PFX "Page number range to small "
- "Need %lu pages, range is [%u, %u]\n",
- bo->mem.num_pages, placement->fpfn,
- placement->lpfn);
- return -EINVAL;
- }
- }
- for (i = 0; i < placement->num_placement; i++) {
- if (!capable(CAP_SYS_ADMIN)) {
- if (placement->placement[i] & TTM_PL_FLAG_NO_EVICT) {
- printk(KERN_ERR TTM_PFX "Need to be root to "
- "modify NO_EVICT status.\n");
- return -EINVAL;
- }
- }
- }
- for (i = 0; i < placement->num_busy_placement; i++) {
- if (!capable(CAP_SYS_ADMIN)) {
- if (placement->busy_placement[i] & TTM_PL_FLAG_NO_EVICT) {
- printk(KERN_ERR TTM_PFX "Need to be root to "
- "modify NO_EVICT status.\n");
- return -EINVAL;
- }
- }
- }
return 0;
}
num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
if (num_pages == 0) {
printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n");
+ if (destroy)
+ (*destroy)(bo);
+ else
+ kfree(bo);
return -EINVAL;
}
bo->destroy = destroy;
int ret = -EINVAL;
struct ttm_mem_type_manager *man;
- if (type >= TTM_NUM_MEM_TYPES) {
- printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type);
- return ret;
- }
-
+ BUG_ON(type >= TTM_NUM_MEM_TYPES);
man = &bdev->man[type];
- if (man->has_type) {
- printk(KERN_ERR TTM_PFX
- "Memory manager already initialized for type %d\n",
- type);
- return ret;
- }
+ BUG_ON(man->has_type);
ret = bdev->driver->init_mem_type(bdev, type, man);
if (ret)
ret = 0;
if (type != TTM_PL_SYSTEM) {
- if (!p_size) {
- printk(KERN_ERR TTM_PFX
- "Zero size memory manager type %d\n",
- type);
- return ret;
- }
-
ret = (*man->func->init)(man, p_size);
if (ret)
return ret;
/**************************************************************************
*
- * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * Copyright (c) 2007-2010 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_placement.h"
-#include <linux/jiffies.h>
+#include "drm_mm.h"
#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/file.h>
+#include <linux/spinlock.h>
#include <linux/module.h>
+/**
+ * Currently we use a spinlock for the lock, but a mutex *may* be
+ * more appropriate to reduce scheduling latency if the range manager
+ * ends up with very fragmented allocation patterns.
+ */
+
+struct ttm_range_manager {
+ struct drm_mm mm;
+ spinlock_t lock;
+};
+
static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
struct ttm_buffer_object *bo,
struct ttm_placement *placement,
struct ttm_mem_reg *mem)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+ struct drm_mm *mm = &rman->mm;
struct drm_mm_node *node = NULL;
unsigned long lpfn;
int ret;
if (unlikely(ret))
return ret;
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
node = drm_mm_search_free_in_range(mm,
mem->num_pages, mem->page_alignment,
placement->fpfn, lpfn, 1);
if (unlikely(node == NULL)) {
- spin_unlock(&glob->lru_lock);
+ spin_unlock(&rman->lock);
return 0;
}
node = drm_mm_get_block_atomic_range(node, mem->num_pages,
- mem->page_alignment,
- placement->fpfn,
- lpfn);
- spin_unlock(&glob->lru_lock);
+ mem->page_alignment,
+ placement->fpfn,
+ lpfn);
+ spin_unlock(&rman->lock);
} while (node == NULL);
mem->mm_node = node;
static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
struct ttm_mem_reg *mem)
{
- struct ttm_bo_global *glob = man->bdev->glob;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
if (mem->mm_node) {
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
drm_mm_put_block(mem->mm_node);
- spin_unlock(&glob->lru_lock);
+ spin_unlock(&rman->lock);
mem->mm_node = NULL;
}
}
static int ttm_bo_man_init(struct ttm_mem_type_manager *man,
unsigned long p_size)
{
- struct drm_mm *mm;
+ struct ttm_range_manager *rman;
int ret;
- mm = kzalloc(sizeof(*mm), GFP_KERNEL);
- if (!mm)
+ rman = kzalloc(sizeof(*rman), GFP_KERNEL);
+ if (!rman)
return -ENOMEM;
- ret = drm_mm_init(mm, 0, p_size);
+ ret = drm_mm_init(&rman->mm, 0, p_size);
if (ret) {
- kfree(mm);
+ kfree(rman);
return ret;
}
- man->priv = mm;
+ spin_lock_init(&rman->lock);
+ man->priv = rman;
return 0;
}
static int ttm_bo_man_takedown(struct ttm_mem_type_manager *man)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
- int ret = 0;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+ struct drm_mm *mm = &rman->mm;
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
if (drm_mm_clean(mm)) {
drm_mm_takedown(mm);
- kfree(mm);
+ spin_unlock(&rman->lock);
+ kfree(rman);
man->priv = NULL;
- } else
- ret = -EBUSY;
- spin_unlock(&glob->lru_lock);
- return ret;
+ return 0;
+ }
+ spin_unlock(&rman->lock);
+ return -EBUSY;
}
static void ttm_bo_man_debug(struct ttm_mem_type_manager *man,
const char *prefix)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
- spin_lock(&glob->lru_lock);
- drm_mm_debug_table(mm, prefix);
- spin_unlock(&glob->lru_lock);
+ spin_lock(&rman->lock);
+ drm_mm_debug_table(&rman->mm, prefix);
+ spin_unlock(&rman->lock);
}
const struct ttm_mem_type_manager_func ttm_bo_manager_func = {
return ret;
ret = be->func->bind(be, bo_mem);
- if (ret) {
- printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n");
+ if (unlikely(ret != 0))
return ret;
- }
ttm->state = tt_bound;
vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
first_pfn + 1;
- if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
+ vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages);
+ if (NULL == vsg->pages)
return -ENOMEM;
- memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
down_read(¤t->mm->mmap_sem);
ret = get_user_pages(current, current->mm,
(unsigned long)xfer->mem_addr,
fence_rep.error = ret;
fence_rep.fence_seq = (uint64_t) sequence;
+ fence_rep.pad64 = 0;
user_fence_rep = (struct drm_vmw_fence_rep __user *)
(unsigned long)arg->fence_rep;
&vmw_vram_ne_placement,
false, &vmw_dmabuf_bo_free);
vmw_overlay_resume_all(dev_priv);
+ if (unlikely(ret != 0))
+ vfbs->buffer = NULL;
return ret;
}
struct vmw_framebuffer_surface *vfbs =
vmw_framebuffer_to_vfbs(&vfb->base);
+ if (unlikely(vfbs->buffer == NULL))
+ return 0;
+
bo = &vfbs->buffer->base;
ttm_bo_unref(&bo);
vfbs->buffer = NULL;
return -EINVAL;
}
- dev_priv->ldu_priv = kmalloc(GFP_KERNEL, sizeof(*dev_priv->ldu_priv));
+ dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL);
if (!dev_priv->ldu_priv)
return -ENOMEM;
return -ENOSYS;
}
- overlay = kmalloc(GFP_KERNEL, sizeof(*overlay));
+ overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
if (!overlay)
return -ENOMEM;
depends on PCI
# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel GMA500
{
struct ad7414_data *data;
int conf;
- int err = 0;
+ int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_READ_WORD_DATA))
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ err = -EOPNOTSUPP;
goto exit;
+ }
data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
if (!data) {
init_completion(&data->auto_update_stop);
data->auto_update = kthread_run(adt7470_update_thread, client,
dev_name(data->hwmon_dev));
- if (IS_ERR(data->auto_update))
+ if (IS_ERR(data->auto_update)) {
+ err = PTR_ERR(data->auto_update);
goto exit_unregister;
+ }
return 0;
Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
Based on max6650.c:
- Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
}
}
- err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
- if (err)
- goto err_free_gpio;
-
fan_data->num_ctrl = num_ctrl;
fan_data->ctrl = ctrl;
fan_data->num_speed = pdata->num_speed;
goto err_free_gpio;
}
+ err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
+ if (err)
+ goto err_free_gpio;
+
return 0;
err_free_gpio:
Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
- Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+ Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
This program is free software; you can redistribute it and/or modify
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
- "Hans J. Koch <hjk@linutronix.de");
+ "Hans J. Koch <hjk@hansjkoch.de>");
MODULE_DESCRIPTION("LM93 driver");
MODULE_LICENSE("GPL");
{
struct i2c_client *client = to_i2c_client(dev);
struct lm95241_data *data = i2c_get_clientdata(client);
+ unsigned long val;
- strict_strtol(buf, 10, &data->interval);
- data->interval = data->interval * HZ / 1000;
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ data->interval = val * HZ / 1000;
return count;
}
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL; \
\
if ((val == 1) || (val == 2)) { \
\
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL;\
\
mutex_lock(&data->update_lock); \
\
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL; \
\
mutex_lock(&data->update_lock); \
\
val = i2c_smbus_read_byte_data(client, i);
if (unlikely(val < 0)) {
dev_dbg(dev,
- "Failed to read ADC value: error %d",
+ "Failed to read ADC value: error %d\n",
val);
ret = ERR_PTR(val);
goto abort;
return -ENODEV;
if (i2c_smbus_read_byte_data(client, LTC4261_STATUS) < 0) {
- dev_err(&client->dev, "Failed to read register %d:%02x:%02x\n",
- adapter->id, client->addr, LTC4261_STATUS);
+ dev_err(&client->dev, "Failed to read status register\n");
return -ENODEV;
}
* max6650.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring.
*
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
*
* based on code written by John Morris <john.morris@spirentcom.com>
* Copyright (c) 2003 Spirent Communications
#define W83795_REG_VID_CTRL 0x6A
+#define W83795_REG_ALARM_CTRL 0x40
+#define ALARM_CTRL_RTSACS (1 << 7)
#define W83795_REG_ALARM(index) (0x41 + (index))
+#define W83795_REG_CLR_CHASSIS 0x4D
#define W83795_REG_BEEP(index) (0x50 + (index))
-#define W83795_REG_CLR_CHASSIS 0x4D
+#define W83795_REG_OVT_CFG 0x58
+#define OVT_CFG_SEL (1 << 7)
#define W83795_REG_FCMS1 0x201
#define W83795_REG_TSS(index) (0x209 + (index))
+#define TSS_MAP_RESERVED 0xff
+static const u8 tss_map[4][6] = {
+ { 0, 1, 2, 3, 4, 5},
+ { 6, 7, 8, 9, 0, 1},
+ {10, 11, 12, 13, 2, 3},
+ { 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
#define PWM_OUTPUT 0
#define PWM_FREQ 1
#define PWM_START 2
u8 setup_pwm[3]; /* Register value */
u8 alarms[6]; /* Register value */
+ u8 enable_beep;
u8 beeps[6]; /* Register value */
char valid;
}
/* Read beep settings */
- for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
- data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+ data->beeps[i] =
+ w83795_read(client, W83795_REG_BEEP(i));
+ }
data->valid_limits = 1;
}
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
u16 tmp;
+ u8 intrusion;
int i;
mutex_lock(&data->update_lock);
w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
}
- /* update alarm */
+ /* Update intrusion and alarms
+ * It is important to read intrusion first, because reading from
+ * register SMI STS6 clears the interrupt status temporarily. */
+ tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+ /* Switch to interrupt status for intrusion if needed */
+ if (tmp & ALARM_CTRL_RTSACS)
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
+ intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+ /* Switch to real-time alarms */
+ w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+ data->alarms[5] |= intrusion;
+ /* Restore original configuration if needed */
+ if (!(tmp & ALARM_CTRL_RTSACS))
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
data->last_updated = jiffies;
data->valid = 1;
val = w83795_read(client, W83795_REG_CLR_CHASSIS);
val |= 0x80;
w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+ /* Clear status and force cache refresh */
+ w83795_read(client, W83795_REG_ALARM(5));
+ data->valid = 0;
mutex_unlock(&data->update_lock);
return count;
}
int index = sensor_attr->index;
u8 tmp;
- if (1 == (data->pwm_fcms[0] & (1 << index))) {
+ /* Speed cruise mode */
+ if (data->pwm_fcms[0] & (1 << index)) {
tmp = 2;
goto out;
}
+ /* Thermal cruise or SmartFan IV mode */
for (tmp = 0; tmp < 6; tmp++) {
if (data->pwm_tfmr[tmp] & (1 << index)) {
tmp = 3;
goto out;
}
}
- if (data->pwm_fomc & (1 << index))
- tmp = 0;
- else
- tmp = 1;
+ /* Manual mode */
+ tmp = 1;
out:
return sprintf(buf, "%u\n", tmp);
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
- if (val > 2)
+ if (val < 1 || val > 2)
return -EINVAL;
mutex_lock(&data->update_lock);
switch (val) {
- case 0:
case 1:
+ /* Clear speed cruise mode bits */
data->pwm_fcms[0] &= ~(1 << index);
w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ /* Clear thermal cruise mode bits */
for (i = 0; i < 6; i++) {
data->pwm_tfmr[i] &= ~(1 << index);
w83795_write(client, W83795_REG_TFMR(i),
data->pwm_tfmr[i]);
}
- data->pwm_fomc |= 1 << index;
- data->pwm_fomc ^= val << index;
- w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
break;
case 2:
data->pwm_fcms[0] |= (1 << index);
return count;
}
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = to_sensor_dev_attr_2(attr)->index;
+ unsigned int mode;
+
+ if (data->pwm_fomc & (1 << index))
+ mode = 0; /* DC */
+ else
+ mode = 1; /* PWM */
+
+ return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+ int useful = 0, i;
+
+ for (i = 0; i < 4; i++) {
+ if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+ continue;
+ if (tss_map[i][tsrc] < 6) /* Analog */
+ useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+ else /* Digital */
+ useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+ }
+
+ return useful;
+}
+
static ssize_t
show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
{
to_sensor_dev_attr_2(attr);
struct w83795_data *data = w83795_update_pwm_config(dev);
int index = sensor_attr->index;
- u8 val = index / 2;
- u8 tmp = data->temp_src[val];
+ u8 tmp = data->temp_src[index / 2];
if (index & 1)
- val = 4;
+ tmp >>= 4; /* Pick high nibble */
else
- val = 0;
- tmp >>= val;
- tmp &= 0x0f;
+ tmp &= 0x0f; /* Pick low nibble */
- return sprintf(buf, "%u\n", tmp);
+ /* Look-up the actual temperature channel number */
+ if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+ return -EINVAL; /* Shouldn't happen */
+
+ return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
}
static ssize_t
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
- unsigned long tmp;
+ int tmp;
+ unsigned long channel;
u8 val = index / 2;
- if (strict_strtoul(buf, 10, &tmp) < 0)
+ if (strict_strtoul(buf, 10, &channel) < 0 ||
+ channel < 1 || channel > 14)
+ return -EINVAL;
+
+ /* Check if request can be fulfilled */
+ for (tmp = 0; tmp < 4; tmp++) {
+ if (tss_map[tmp][index] == channel - 1)
+ break;
+ }
+ if (tmp == 4) /* No match */
return -EINVAL;
- tmp = SENSORS_LIMIT(tmp, 0, 15);
mutex_lock(&data->update_lock);
if (index & 1) {
#define NOT_USED -1
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
* somewhere else in the code */
#define SENSOR_ATTR_IN(index) { \
SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + ((index > 14) ? 1 : 0)) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_FAN(index) { \
SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
NULL, FAN_INPUT, index - 1), \
show_pwm, store_pwm, PWM_FREQ, index - 1), \
SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \
+ show_pwm_mode, NULL, NOT_USED, index - 1), \
SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_DTS(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
show_dts_mode, NULL, NOT_USED, index - 7), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_TEMP(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + (index > 4 ? 11 : 17)), \
- SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO, \
- show_temp_src, store_temp_src, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
show_temp_pwm_enable, store_temp_pwm_enable, \
TEMP_PWM_ENABLE, index - 1), \
SENSOR_ATTR_FAN(14),
};
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
SENSOR_ATTR_TEMP(1),
SENSOR_ATTR_TEMP(2),
SENSOR_ATTR_TEMP(3),
SENSOR_ATTR_DTS(14),
};
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
SENSOR_ATTR_PWM(3),
SENSOR_ATTR_PWM(8),
};
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+ SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 0),
+ SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 1),
+ SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 2),
+ SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 3),
+ SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 4),
+ SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
static const struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 46),
- SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 46),
- SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 47),
#ifdef CONFIG_SENSORS_W83795_FANCTRL
SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
store_fanin, FANIN_TOL, NOT_USED),
#endif
};
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+ SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 46),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 47),
+};
+
/*
* Driver interface
*/
if (!(data->has_in & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+ if (j == 4 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_in[i][j].dev_attr);
if (err)
return err;
if (!(data->has_fan & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+ if (j == 3 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_fan[i][j].dev_attr);
if (err)
return err;
}
}
+ for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+ j = w83795_tss_useful(data, i);
+ if (!j)
+ continue;
+ err = fn(dev, &w83795_tss[i].dev_attr);
+ if (err)
+ return err;
+ }
+
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = fn(dev, &sda_single_files[i].dev_attr);
if (err)
return err;
}
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+ err = fn(dev, &sda_beep_files[i].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
#ifdef CONFIG_SENSORS_W83795_FANCTRL
for (i = 0; i < data->has_pwm; i++) {
for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
#else
for (j = 0; j < 8; j++) {
#endif
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_temp[i][j].dev_attr);
if (err)
return err;
if (!(data->has_dts & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_dts[i][j].dev_attr);
if (err)
return err;
else
data->has_pwm = 2;
+ /* Check if BEEP pin is available */
+ if (data->chip_type == w83795g) {
+ /* The W83795G has a dedicated BEEP pin */
+ data->enable_beep = 1;
+ } else {
+ /* The W83795ADG has a shared pin for OVT# and BEEP, so you
+ * can't have both */
+ tmp = w83795_read(client, W83795_REG_OVT_CFG);
+ if ((tmp & OVT_CFG_SEL) == 0)
+ data->enable_beep = 1;
+ }
+
err = w83795_handle_files(dev, device_create_file);
if (err)
goto exit_remove;
goto out_list;
}
+ /* Sanity checks */
+ if (unlikely(adap->name[0] == '\0')) {
+ pr_err("i2c-core: Attempt to register an adapter with "
+ "no name!\n");
+ return -EINVAL;
+ }
+ if (unlikely(!adap->algo)) {
+ pr_err("i2c-core: Attempt to register adapter '%s' with "
+ "no algo!\n", adap->name);
+ return -EINVAL;
+ }
+
rt_mutex_init(&adap->bus_lock);
mutex_init(&adap->userspace_clients_lock);
INIT_LIST_HEAD(&adap->userspace_clients);
snprintf(priv->adap.name, sizeof(priv->adap.name),
"i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
priv->adap.owner = THIS_MODULE;
- priv->adap.id = parent->id;
priv->adap.algo = &priv->algo;
priv->adap.algo_data = priv;
priv->adap.dev.parent = &parent->dev;
* dev->event_lock held and interrupts disabled.
*/
static void input_pass_event(struct input_dev *dev,
+ struct input_handler *src_handler,
unsigned int type, unsigned int code, int value)
{
struct input_handler *handler;
continue;
handler = handle->handler;
+
+ /*
+ * If this is the handler that injected this
+ * particular event we want to skip it to avoid
+ * filters firing again and again.
+ */
+ if (handler == src_handler)
+ continue;
+
if (!handler->filter) {
if (filtered)
break;
if (test_bit(dev->repeat_key, dev->key) &&
is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) {
- input_pass_event(dev, EV_KEY, dev->repeat_key, 2);
+ input_pass_event(dev, NULL, EV_KEY, dev->repeat_key, 2);
if (dev->sync) {
/*
* Otherwise assume that the driver will send
* SYN_REPORT once it's done.
*/
- input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+ input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
}
if (dev->rep[REP_PERIOD])
#define INPUT_PASS_TO_ALL (INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
static int input_handle_abs_event(struct input_dev *dev,
+ struct input_handler *src_handler,
unsigned int code, int *pval)
{
bool is_mt_event;
/* Flush pending "slot" event */
if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
- input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
+ input_pass_event(dev, src_handler,
+ EV_ABS, ABS_MT_SLOT, dev->slot);
}
return INPUT_PASS_TO_HANDLERS;
}
static void input_handle_event(struct input_dev *dev,
+ struct input_handler *src_handler,
unsigned int type, unsigned int code, int value)
{
int disposition = INPUT_IGNORE_EVENT;
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX))
- disposition = input_handle_abs_event(dev, code, &value);
+ disposition = input_handle_abs_event(dev, src_handler,
+ code, &value);
break;
dev->event(dev, type, code, value);
if (disposition & INPUT_PASS_TO_HANDLERS)
- input_pass_event(dev, type, code, value);
+ input_pass_event(dev, src_handler, type, code, value);
}
/**
spin_lock_irqsave(&dev->event_lock, flags);
add_input_randomness(type, code, value);
- input_handle_event(dev, type, code, value);
+ input_handle_event(dev, NULL, type, code, value);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
}
rcu_read_lock();
grab = rcu_dereference(dev->grab);
if (!grab || grab == handle)
- input_handle_event(dev, type, code, value);
+ input_handle_event(dev, handle->handler,
+ type, code, value);
rcu_read_unlock();
spin_unlock_irqrestore(&dev->event_lock, flags);
for (code = 0; code <= KEY_MAX; code++) {
if (is_event_supported(code, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(code, dev->key)) {
- input_pass_event(dev, EV_KEY, code, 0);
+ input_pass_event(dev, NULL, EV_KEY, code, 0);
}
}
- input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+ input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
}
}
!is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(old_keycode, dev->key)) {
- input_pass_event(dev, EV_KEY, old_keycode, 0);
+ input_pass_event(dev, NULL, EV_KEY, old_keycode, 0);
if (dev->sync)
- input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+ input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
}
out:
} \
} while (0)
-#ifdef CONFIG_PM
-static void input_dev_reset(struct input_dev *dev, bool activate)
+static void input_dev_toggle(struct input_dev *dev, bool activate)
{
if (!dev->event)
return;
}
}
+/**
+ * input_reset_device() - reset/restore the state of input device
+ * @dev: input device whose state needs to be reset
+ *
+ * This function tries to reset the state of an opened input device and
+ * bring internal state and state if the hardware in sync with each other.
+ * We mark all keys as released, restore LED state, repeat rate, etc.
+ */
+void input_reset_device(struct input_dev *dev)
+{
+ mutex_lock(&dev->mutex);
+
+ if (dev->users) {
+ input_dev_toggle(dev, true);
+
+ /*
+ * Keys that have been pressed at suspend time are unlikely
+ * to be still pressed when we resume.
+ */
+ spin_lock_irq(&dev->event_lock);
+ input_dev_release_keys(dev);
+ spin_unlock_irq(&dev->event_lock);
+ }
+
+ mutex_unlock(&dev->mutex);
+}
+EXPORT_SYMBOL(input_reset_device);
+
+#ifdef CONFIG_PM
static int input_dev_suspend(struct device *dev)
{
struct input_dev *input_dev = to_input_dev(dev);
mutex_lock(&input_dev->mutex);
- input_dev_reset(input_dev, false);
+
+ if (input_dev->users)
+ input_dev_toggle(input_dev, false);
+
mutex_unlock(&input_dev->mutex);
return 0;
{
struct input_dev *input_dev = to_input_dev(dev);
- mutex_lock(&input_dev->mutex);
- input_dev_reset(input_dev, true);
-
- /*
- * Keys that have been pressed at suspend time are unlikely
- * to be still pressed when we resume.
- */
- spin_lock_irq(&input_dev->event_lock);
- input_dev_release_keys(input_dev);
- spin_unlock_irq(&input_dev->event_lock);
-
- mutex_unlock(&input_dev->mutex);
+ input_reset_device(input_dev);
return 0;
}
* I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Copyright (C) 2008-2010 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#include <linux/i2c/adp5588.h>
- /* Configuration Register1 */
-#define AUTO_INC (1 << 7)
-#define GPIEM_CFG (1 << 6)
-#define OVR_FLOW_M (1 << 5)
-#define INT_CFG (1 << 4)
-#define OVR_FLOW_IEN (1 << 3)
-#define K_LCK_IM (1 << 2)
-#define GPI_IEN (1 << 1)
-#define KE_IEN (1 << 0)
-
-/* Interrupt Status Register */
-#define CMP2_INT (1 << 5)
-#define CMP1_INT (1 << 4)
-#define OVR_FLOW_INT (1 << 3)
-#define K_LCK_INT (1 << 2)
-#define GPI_INT (1 << 1)
-#define KE_INT (1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define K_LCK_EN (1 << 6)
-#define LCK21 0x30
-#define KEC 0xF
-
/* Key Event Register xy */
#define KEY_EV_PRESSED (1 << 7)
#define KEY_EV_MASK (0x7F)
#define KEYP_MAX_EVENT 10
-#define MAXGPIO 18
-#define ADP_BANK(offs) ((offs) >> 3)
-#define ADP_BIT(offs) (1u << ((offs) & 0x7))
-
/*
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
* since the Event Counter Register updated 25ms after the interrupt
const struct adp5588_gpi_map *gpimap;
unsigned short gpimapsize;
#ifdef CONFIG_GPIOLIB
- unsigned char gpiomap[MAXGPIO];
+ unsigned char gpiomap[ADP5588_MAXGPIO];
bool export_gpio;
struct gpio_chip gc;
struct mutex gpio_lock; /* Protect cached dir, dat_out */
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
}
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
mutex_lock(&kpad->gpio_lock);
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
const struct adp5588_kpad_platform_data *pdata)
{
- bool pin_used[MAXGPIO];
+ bool pin_used[ADP5588_MAXGPIO];
int n_unused = 0;
int i;
for (i = 0; i < kpad->gpimapsize; i++)
pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
- for (i = 0; i < MAXGPIO; i++)
+ for (i = 0; i < ADP5588_MAXGPIO; i++)
if (!pin_used[i])
kpad->gpiomap[n_unused++] = i;
return error;
}
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
kpad->dat_out[i] = adp5588_read(kpad->client,
GPIO_DAT_OUT1 + i);
kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
status = adp5588_read(client, INT_STAT);
- if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
+ if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */
dev_err(&client->dev, "Event Overflow Error\n");
- if (status & KE_INT) {
- ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+ if (status & ADP5588_KE_INT) {
+ ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
if (ev_cnt) {
adp5588_report_events(kpad, ev_cnt);
input_sync(kpad->input);
if (pdata->en_keylock) {
ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
- ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+ ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
}
for (i = 0; i < KEYP_MAX_EVENT; i++)
}
if (gpio_data) {
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
int pull_mask = gpio_data->pullup_dis_mask;
ret |= adp5588_write(client, GPIO_PULL1 + i,
}
}
- ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
- OVR_FLOW_INT | K_LCK_INT |
- GPI_INT | KE_INT); /* Status is W1C */
+ ret |= adp5588_write(client, INT_STAT,
+ ADP5588_CMP2_INT | ADP5588_CMP1_INT |
+ ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
+ ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
- ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+ ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
+ ADP5588_OVR_FLOW_IEN |
+ ADP5588_KE_IEN);
if (ret < 0) {
dev_err(&client->dev, "Write Error\n");
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
/*
* Scancode to keycode tables. These are just the default setting, and
* are loadable via a userland utility.
#define ATKBD_CMD_ENABLE 0x00f4
#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */
#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */
-#define ATKBD_CMD_SETALL_MBR 0x00fa
+#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */
#define ATKBD_CMD_RESET_BAT 0x02ff
#define ATKBD_CMD_RESEND 0x00fe
#define ATKBD_CMD_EX_ENABLE 0x10ea
}
}
+ if (atkbd_terminal) {
+ ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+ return 3;
+ }
+
if (target_set != 3)
return 2;
idev->id.product = 0x0001;
idev->id.version = 0x0100;
- input_set_drvdata(idev, lp);
-
- ret = input_register_device(idev);
- if (ret) {
- dev_err(&client->dev, "input_register_device() failed\n");
- goto fail_register;
- }
-
lp->laststate = read_state(lp);
ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
DRV_NAME, lp);
if (ret) {
dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
- goto fail_irq;
+ goto fail_free_device;
+ }
+
+ ret = input_register_device(idev);
+ if (ret) {
+ dev_err(&client->dev, "input_register_device() failed\n");
+ goto fail_free_irq;
}
i2c_set_clientdata(client, lp);
return 0;
- fail_irq:
- input_unregister_device(idev);
- fail_register:
- input_set_drvdata(idev, NULL);
+ fail_free_irq:
+ free_irq(client->irq, lp);
+ fail_free_device:
input_free_device(idev);
fail_allocate:
kfree(lp);
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
},
},
+ {
+ /*
+ * Most (all?) VAIOs do not have external PS/2 ports nor
+ * they implement active multiplexing properly, and
+ * MUX discovery usually messes up keyboard/touchpad.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+ },
+ },
{
/* Amoi M636/A737 */
.matches = {
err = input_register_device(acecad->input);
if (err)
- goto fail2;
+ goto fail3;
usb_set_intfdata(intf, acecad);
return 0;
+ fail3: usb_free_urb(acecad->irq);
fail2: usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
fail1: input_free_device(input_dev);
kfree(acecad);
&bcs->hw.isar.reg->Flags))
bcs->hw.isar.dpath = 1;
else {
- printk(KERN_WARNING"isar modeisar analog funktions only with DP1\n");
- debugl1(cs, "isar modeisar analog funktions only with DP1");
+ printk(KERN_WARNING"isar modeisar analog functions only with DP1\n");
+ debugl1(cs, "isar modeisar analog functions only with DP1");
return(1);
}
break;
if NEW_LEDS
config LEDS_CLASS
- tristate "LED Class Support"
+ bool "LED Class Support"
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called leds-lp3944.
+config LEDS_LP5521
+ tristate "LED Support for N.S. LP5521 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5521 LED driver. It is 3 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
+config LEDS_LP5523
+ tristate "LED Support for N.S. LP5523 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5523 LED driver. It is 9 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
depends on X86 && SERIO_I8042 && DMI
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
+obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
+obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
__ATTR_NULL,
};
+static void led_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (void *)data;
+ unsigned long brightness;
+ unsigned long delay;
+
+ if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
+ brightness = led_get_brightness(led_cdev);
+ if (!brightness) {
+ /* Time to switch the LED on. */
+ brightness = led_cdev->blink_brightness;
+ delay = led_cdev->blink_delay_on;
+ } else {
+ /* Store the current brightness value to be able
+ * to restore it when the delay_off period is over.
+ */
+ led_cdev->blink_brightness = brightness;
+ brightness = LED_OFF;
+ delay = led_cdev->blink_delay_off;
+ }
+
+ led_set_brightness(led_cdev, brightness);
+
+ mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void led_stop_software_blink(struct led_classdev *led_cdev)
+{
+ /* deactivate previous settings */
+ del_timer_sync(&led_cdev->blink_timer);
+ led_cdev->blink_delay_on = 0;
+ led_cdev->blink_delay_off = 0;
+}
+
+static void led_set_software_blink(struct led_classdev *led_cdev,
+ unsigned long delay_on,
+ unsigned long delay_off)
+{
+ int current_brightness;
+
+ current_brightness = led_get_brightness(led_cdev);
+ if (current_brightness)
+ led_cdev->blink_brightness = current_brightness;
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+
+ if (delay_on == led_cdev->blink_delay_on &&
+ delay_off == led_cdev->blink_delay_off)
+ return;
+
+ led_stop_software_blink(led_cdev);
+
+ led_cdev->blink_delay_on = delay_on;
+ led_cdev->blink_delay_off = delay_off;
+
+ /* never on - don't blink */
+ if (!delay_on)
+ return;
+
+ /* never off - just set to brightness */
+ if (!delay_off) {
+ led_set_brightness(led_cdev, led_cdev->blink_brightness);
+ return;
+ }
+
+ mod_timer(&led_cdev->blink_timer, jiffies + 1);
+}
+
+
/**
* led_classdev_suspend - suspend an led_classdev.
* @led_cdev: the led_classdev to suspend.
led_update_brightness(led_cdev);
+ init_timer(&led_cdev->blink_timer);
+ led_cdev->blink_timer.function = led_timer_function;
+ led_cdev->blink_timer.data = (unsigned long)led_cdev;
+
#ifdef CONFIG_LEDS_TRIGGERS
led_trigger_set_default(led_cdev);
#endif
return 0;
}
-
EXPORT_SYMBOL_GPL(led_classdev_register);
/**
up_write(&led_cdev->trigger_lock);
#endif
+ /* Stop blinking */
+ led_brightness_set(led_cdev, LED_OFF);
+
device_unregister(led_cdev->dev);
down_write(&leds_list_lock);
}
EXPORT_SYMBOL_GPL(led_classdev_unregister);
+void led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ if (led_cdev->blink_set &&
+ led_cdev->blink_set(led_cdev, delay_on, delay_off))
+ return;
+
+ /* blink with 1 Hz as default if nothing specified */
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ led_set_software_blink(led_cdev, *delay_on, *delay_off);
+}
+EXPORT_SYMBOL(led_blink_set);
+
+void led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ led_stop_software_blink(led_cdev);
+ led_cdev->brightness_set(led_cdev, brightness);
+}
+EXPORT_SYMBOL(led_brightness_set);
+
static int __init leds_init(void)
{
leds_class = class_create(THIS_MODULE, "leds");
if (led_cdev->trigger->deactivate)
led_cdev->trigger->deactivate(led_cdev);
led_cdev->trigger = NULL;
- led_set_brightness(led_cdev, LED_OFF);
+ led_brightness_set(led_cdev, LED_OFF);
}
if (trigger) {
write_lock_irqsave(&trigger->leddev_list_lock, flags);
static int __init gpio_led_init(void)
{
- int ret;
+ int ret = 0;
#ifdef CONFIG_LEDS_GPIO_PLATFORM
ret = platform_driver_register(&gpio_led_driver);
--- /dev/null
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5521.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5521_PROGRAM_LENGTH 32 /* in bytes */
+
+#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */
+#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */
+
+#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */
+#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */
+
+#define LP5521_CMD_LOAD 0x15 /* 00010101 */
+#define LP5521_CMD_RUN 0x2a /* 00101010 */
+#define LP5521_CMD_DIRECT 0x3f /* 00111111 */
+#define LP5521_CMD_DISABLED 0x00 /* 00000000 */
+
+/* Registers */
+#define LP5521_REG_ENABLE 0x00
+#define LP5521_REG_OP_MODE 0x01
+#define LP5521_REG_R_PWM 0x02
+#define LP5521_REG_G_PWM 0x03
+#define LP5521_REG_B_PWM 0x04
+#define LP5521_REG_R_CURRENT 0x05
+#define LP5521_REG_G_CURRENT 0x06
+#define LP5521_REG_B_CURRENT 0x07
+#define LP5521_REG_CONFIG 0x08
+#define LP5521_REG_R_CHANNEL_PC 0x09
+#define LP5521_REG_G_CHANNEL_PC 0x0A
+#define LP5521_REG_B_CHANNEL_PC 0x0B
+#define LP5521_REG_STATUS 0x0C
+#define LP5521_REG_RESET 0x0D
+#define LP5521_REG_GPO 0x0E
+#define LP5521_REG_R_PROG_MEM 0x10
+#define LP5521_REG_G_PROG_MEM 0x30
+#define LP5521_REG_B_PROG_MEM 0x50
+
+#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM
+#define LP5521_PROG_MEM_SIZE 0x20
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT
+
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN 0x2A
+
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */
+#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT 1 /* Internal clock */
+#define LP5521_CLK_AUTO 2 /* Automatic clock selection */
+
+/* Status */
+#define LP5521_EXT_CLK_USED 0x08
+
+struct lp5521_engine {
+ const struct attribute_group *attributes;
+ int id;
+ u8 mode;
+ u8 prog_page;
+ u8 engine_mask;
+};
+
+struct lp5521_led {
+ int id;
+ u8 chan_nr;
+ u8 led_current;
+ u8 max_current;
+ struct led_classdev cdev;
+ struct work_struct brightness_work;
+ u8 brightness;
+};
+
+struct lp5521_chip {
+ struct lp5521_platform_data *pdata;
+ struct mutex lock; /* Serialize control */
+ struct i2c_client *client;
+ struct lp5521_engine engines[LP5521_MAX_ENGINES];
+ struct lp5521_led leds[LP5521_MAX_LEDS];
+ u8 num_channels;
+ u8 num_leds;
+};
+
+#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev)
+#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \
+ engines[(eng)->id - 1])
+#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \
+ leds[(led)->id])
+
+static void lp5521_led_brightness_work(struct work_struct *work);
+
+static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0)
+ return -EIO;
+
+ *buf = ret;
+ return 0;
+}
+
+static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 engine_state;
+
+ /* Only transition between RUN and DIRECT mode are handled here */
+ if (mode == LP5521_CMD_LOAD)
+ return 0;
+
+ if (mode == LP5521_CMD_DISABLED)
+ mode = LP5521_CMD_DIRECT;
+
+ ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+
+ /* set mode only for this engine */
+ engine_state &= ~(engine->engine_mask);
+ mode &= engine->engine_mask;
+ engine_state |= mode;
+ ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+
+ return ret;
+}
+
+static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(eng);
+ struct i2c_client *client = chip->client;
+ int ret;
+ int addr;
+ u8 mode;
+
+ /* move current engine to direct mode and remember the state */
+ ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+ usleep_range(1000, 10000);
+ ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+
+ /* For loading, all the engines to load mode */
+ lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ usleep_range(1000, 10000);
+ lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+ usleep_range(1000, 10000);
+
+ addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
+ i2c_smbus_write_i2c_block_data(client,
+ addr,
+ LP5521_PROG_MEM_SIZE,
+ pattern);
+
+ ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
+ return ret;
+}
+
+static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
+{
+ return lp5521_write(chip->client,
+ LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+ curr);
+}
+
+static void lp5521_init_engine(struct lp5521_chip *chip,
+ const struct attribute_group *attr_group)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ chip->engines[i].id = i + 1;
+ chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
+ chip->engines[i].prog_page = i;
+ chip->engines[i].attributes = &attr_group[i];
+ }
+}
+
+static int lp5521_configure(struct i2c_client *client,
+ const struct attribute_group *attr_group)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int ret;
+
+ lp5521_init_engine(chip, attr_group);
+
+ lp5521_write(client, LP5521_REG_RESET, 0xff);
+
+ usleep_range(10000, 20000);
+
+ /* Set all PWMs to direct control mode */
+ ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
+
+ /* Enable auto-powersave, set charge pump to auto, red to battery */
+ ret |= lp5521_write(client, LP5521_REG_CONFIG,
+ LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+
+ /* Initialize all channels PWM to zero -> leds off */
+ ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
+ ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
+ ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
+
+ /* Set engines are set to run state when OP_MODE enables engines */
+ ret |= lp5521_write(client, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+ LP5521_EXEC_RUN);
+ /* enable takes 500us */
+ usleep_range(500, 20000);
+
+ return ret;
+}
+
+static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
+{
+ int ret;
+ u8 status;
+
+ ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ /* Check that ext clock is really in use if requested */
+ if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
+ if ((status & LP5521_EXT_CLK_USED) == 0)
+ return -EIO;
+ return 0;
+}
+
+static void lp5521_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp5521_led *led = cdev_to_led(cdev);
+ led->brightness = (u8)brightness;
+ schedule_work(&led->brightness_work);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+ struct lp5521_led *led = container_of(work,
+ struct lp5521_led,
+ brightness_work);
+ struct lp5521_chip *chip = led_to_lp5521(led);
+ struct i2c_client *client = chip->client;
+
+ mutex_lock(&chip->lock);
+ lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+/* Detect the chip by setting its ENABLE register and reading it back. */
+static int lp5521_detect(struct i2c_client *client)
+{
+ int ret;
+ u8 buf;
+
+ ret = lp5521_write(client, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+ if (ret)
+ return ret;
+ usleep_range(1000, 10000);
+ ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
+ if (ret)
+ return ret;
+ if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+ return -ENODEV;
+
+ return 0;
+}
+
+/* Set engine mode and create appropriate sysfs attributes, if required. */
+static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ struct device *dev = &client->dev;
+ int ret = 0;
+
+ /* if in that mode already do nothing, except for run */
+ if (mode == engine->mode && mode != LP5521_CMD_RUN)
+ return 0;
+
+ if (mode == LP5521_CMD_RUN) {
+ ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
+ } else if (mode == LP5521_CMD_LOAD) {
+ lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+ lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
+
+ ret = sysfs_create_group(&dev->kobj, engine->attributes);
+ if (ret)
+ return ret;
+ } else if (mode == LP5521_CMD_DISABLED) {
+ lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+ }
+
+ /* remove load attribute from sysfs if not in load mode */
+ if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, engine->attributes);
+
+ engine->mode = mode;
+
+ return ret;
+}
+
+static int lp5521_do_store_load(struct lp5521_engine *engine,
+ const char *buf, size_t len)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ int ret, nrchars, offset = 0, i = 0;
+ char c[3];
+ unsigned cmd;
+ u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+
+ while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto fail;
+ pattern[i] = (u8)cmd;
+
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto fail;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_load_program(engine, pattern);
+ mutex_unlock(&chip->lock);
+
+ if (ret) {
+ dev_err(&client->dev, "failed loading pattern\n");
+ return ret;
+ }
+
+ return len;
+fail:
+ dev_err(&client->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ switch (chip->engines[nr - 1].mode) {
+ case LP5521_CMD_RUN:
+ return sprintf(buf, "run\n");
+ case LP5521_CMD_LOAD:
+ return sprintf(buf, "load\n");
+ case LP5521_CMD_DISABLED:
+ return sprintf(buf, "disabled\n");
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ struct lp5521_engine *engine = &chip->engines[nr - 1];
+ mutex_lock(&chip->lock);
+
+ if (!strncmp(buf, "run", 3))
+ lp5521_set_mode(engine, LP5521_CMD_RUN);
+ else if (!strncmp(buf, "load", 4))
+ lp5521_set_mode(engine, LP5521_CMD_LOAD);
+ else if (!strncmp(buf, "disabled", 8))
+ lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+
+ mutex_unlock(&chip->lock);
+ return len;
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+ struct lp5521_chip *chip = led_to_lp5521(led);
+ ssize_t ret;
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_set_led_current(chip, led->id, curr);
+ mutex_unlock(&chip->lock);
+
+ if (ret < 0)
+ return ret;
+
+ led->led_current = (u8)curr;
+
+ return len;
+}
+
+static ssize_t lp5521_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int ret;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_run_selftest(chip, buf);
+ mutex_unlock(&chip->lock);
+ return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5521_led_attributes[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+
+static struct attribute_group lp5521_led_attribute_group = {
+ .attrs = lp5521_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+ show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+ show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+ show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+
+static struct attribute *lp5521_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine1_attributes[] = {
+ &dev_attr_engine1_load.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine2_attributes[] = {
+ &dev_attr_engine2_load.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine3_attributes[] = {
+ &dev_attr_engine3_load.attr,
+ NULL
+};
+
+static const struct attribute_group lp5521_group = {
+ .attrs = lp5521_attributes,
+};
+
+static const struct attribute_group lp5521_engine_group[] = {
+ {.attrs = lp5521_engine1_attributes },
+ {.attrs = lp5521_engine2_attributes },
+ {.attrs = lp5521_engine3_attributes },
+};
+
+static int lp5521_register_sysfs(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ return sysfs_create_group(&dev->kobj, &lp5521_group);
+}
+
+static void lp5521_unregister_sysfs(struct i2c_client *client)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &lp5521_group);
+
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ if (chip->engines[i].mode == LP5521_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj,
+ chip->engines[i].attributes);
+ }
+
+ for (i = 0; i < chip->num_leds; i++)
+ sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+ &lp5521_led_attribute_group);
+}
+
+static int __init lp5521_init_led(struct lp5521_led *led,
+ struct i2c_client *client,
+ int chan, struct lp5521_platform_data *pdata)
+{
+ struct device *dev = &client->dev;
+ char name[32];
+ int res;
+
+ if (chan >= LP5521_MAX_LEDS)
+ return -EINVAL;
+
+ if (pdata->led_config[chan].led_current == 0)
+ return 0;
+
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+
+ if (led->chan_nr >= LP5521_MAX_LEDS) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ LP5521_MAX_LEDS - 1);
+ return -EINVAL;
+ }
+
+ snprintf(name, sizeof(name), "%s:channel%d", client->name, chan);
+ led->cdev.brightness_set = lp5521_set_brightness;
+ led->cdev.name = name;
+ res = led_classdev_register(dev, &led->cdev);
+ if (res < 0) {
+ dev_err(dev, "couldn't register led on channel %d\n", chan);
+ return res;
+ }
+
+ res = sysfs_create_group(&led->cdev.dev->kobj,
+ &lp5521_led_attribute_group);
+ if (res < 0) {
+ dev_err(dev, "couldn't register current attribute\n");
+ led_classdev_unregister(&led->cdev);
+ return res;
+ }
+ return 0;
+}
+
+static int lp5521_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp5521_chip *chip;
+ struct lp5521_platform_data *pdata;
+ int ret, i, led;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ ret = -EINVAL;
+ goto fail1;
+ }
+
+ mutex_init(&chip->lock);
+
+ chip->pdata = pdata;
+
+ if (pdata->setup_resources) {
+ ret = pdata->setup_resources();
+ if (ret < 0)
+ goto fail1;
+ }
+
+ if (pdata->enable) {
+ pdata->enable(0);
+ usleep_range(1000, 10000);
+ pdata->enable(1);
+ usleep_range(1000, 10000); /* Spec says min 500us */
+ }
+
+ ret = lp5521_detect(client);
+
+ if (ret) {
+ dev_err(&client->dev, "Chip not found\n");
+ goto fail2;
+ }
+
+ dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+ ret = lp5521_configure(client, lp5521_engine_group);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring chip\n");
+ goto fail2;
+ }
+
+ /* Initialize leds */
+ chip->num_channels = pdata->num_channels;
+ chip->num_leds = 0;
+ led = 0;
+ for (i = 0; i < pdata->num_channels; i++) {
+ /* Do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
+ if (ret) {
+ dev_err(&client->dev, "error initializing leds\n");
+ goto fail3;
+ }
+ chip->num_leds++;
+
+ chip->leds[led].id = led;
+ /* Set initial LED current */
+ lp5521_set_led_current(chip, led,
+ chip->leds[led].led_current);
+
+ INIT_WORK(&(chip->leds[led].brightness_work),
+ lp5521_led_brightness_work);
+
+ led++;
+ }
+
+ ret = lp5521_register_sysfs(client);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto fail3;
+ }
+ return ret;
+fail3:
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+fail2:
+ if (pdata->enable)
+ pdata->enable(0);
+ if (pdata->release_resources)
+ pdata->release_resources();
+fail1:
+ kfree(chip);
+ return ret;
+}
+
+static int lp5521_remove(struct i2c_client *client)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int i;
+
+ lp5521_unregister_sysfs(client);
+
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+
+ if (chip->pdata->enable)
+ chip->pdata->enable(0);
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+ kfree(chip);
+ return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+ { "lp5521", 0 }, /* Three channel chip */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+static struct i2c_driver lp5521_driver = {
+ .driver = {
+ .name = "lp5521",
+ },
+ .probe = lp5521_probe,
+ .remove = lp5521_remove,
+ .id_table = lp5521_id,
+};
+
+static int __init lp5521_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&lp5521_driver);
+
+ if (ret < 0)
+ printk(KERN_ALERT "Adding lp5521 driver failed\n");
+
+ return ret;
+}
+
+static void __exit lp5521_exit(void)
+{
+ i2c_del_driver(&lp5521_driver);
+}
+
+module_init(lp5521_init);
+module_exit(lp5521_exit);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE 0x00
+#define LP5523_REG_OP_MODE 0x01
+#define LP5523_REG_RATIOMETRIC_MSB 0x02
+#define LP5523_REG_RATIOMETRIC_LSB 0x03
+#define LP5523_REG_ENABLE_LEDS_MSB 0x04
+#define LP5523_REG_ENABLE_LEDS_LSB 0x05
+#define LP5523_REG_LED_CNTRL_BASE 0x06
+#define LP5523_REG_LED_PWM_BASE 0x16
+#define LP5523_REG_LED_CURRENT_BASE 0x26
+#define LP5523_REG_CONFIG 0x36
+#define LP5523_REG_CHANNEL1_PC 0x37
+#define LP5523_REG_CHANNEL2_PC 0x38
+#define LP5523_REG_CHANNEL3_PC 0x39
+#define LP5523_REG_STATUS 0x3a
+#define LP5523_REG_GPO 0x3b
+#define LP5523_REG_VARIABLE 0x3c
+#define LP5523_REG_RESET 0x3d
+#define LP5523_REG_TEMP_CTRL 0x3e
+#define LP5523_REG_TEMP_READ 0x3f
+#define LP5523_REG_TEMP_WRITE 0x40
+#define LP5523_REG_LED_TEST_CTRL 0x41
+#define LP5523_REG_LED_TEST_ADC 0x42
+#define LP5523_REG_ENG1_VARIABLE 0x45
+#define LP5523_REG_ENG2_VARIABLE 0x46
+#define LP5523_REG_ENG3_VARIABLE 0x47
+#define LP5523_REG_MASTER_FADER1 0x48
+#define LP5523_REG_MASTER_FADER2 0x49
+#define LP5523_REG_MASTER_FADER3 0x4a
+#define LP5523_REG_CH1_PROG_START 0x4c
+#define LP5523_REG_CH2_PROG_START 0x4d
+#define LP5523_REG_CH3_PROG_START 0x4e
+#define LP5523_REG_PROG_PAGE_SEL 0x4f
+#define LP5523_REG_PROG_MEM 0x50
+
+#define LP5523_CMD_LOAD 0x15 /* 00010101 */
+#define LP5523_CMD_RUN 0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED 0x00 /* 00000000 */
+
+#define LP5523_ENABLE 0x40
+#define LP5523_AUTO_INC 0x40
+#define LP5523_PWR_SAVE 0x20
+#define LP5523_PWM_PWR_SAVE 0x04
+#define LP5523_CP_1 0x08
+#define LP5523_CP_1_5 0x10
+#define LP5523_CP_AUTO 0x18
+#define LP5523_INT_CLK 0x01
+#define LP5523_AUTO_CLK 0x02
+#define LP5523_EN_LEDTEST 0x80
+#define LP5523_LEDTEST_DONE 0x80
+
+#define LP5523_DEFAULT_CURRENT 50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH 32 /* in bytes */
+#define LP5523_PROGRAM_PAGES 6
+#define LP5523_ADC_SHORTCIRC_LIM 80
+
+#define LP5523_LEDS 9
+#define LP5523_ENGINES 3
+
+#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED 0x08
+
+#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id) (((id) - 1) * 2)
+
+struct lp5523_engine {
+ const struct attribute_group *attributes;
+ int id;
+ u8 mode;
+ u8 prog_page;
+ u8 mux_page;
+ u16 led_mux;
+ u8 engine_mask;
+};
+
+struct lp5523_led {
+ int id;
+ u8 chan_nr;
+ u8 led_current;
+ u8 max_current;
+ struct led_classdev cdev;
+ struct work_struct brightness_work;
+ u8 brightness;
+};
+
+struct lp5523_chip {
+ struct mutex lock; /* Serialize control */
+ struct i2c_client *client;
+ struct lp5523_engine engines[LP5523_ENGINES];
+ struct lp5523_led leds[LP5523_LEDS];
+ struct lp5523_platform_data *pdata;
+ u8 num_channels;
+ u8 num_leds;
+};
+
+#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev)
+
+static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+ return container_of(engine, struct lp5523_chip,
+ engines[engine->id - 1]);
+}
+
+static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+ return container_of(led, struct lp5523_chip,
+ leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+ s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ return -EIO;
+
+ *buf = ret;
+ return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+ int ret;
+ u8 buf;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+ if (ret)
+ return ret;
+ ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+ if (ret)
+ return ret;
+ if (buf == 0x40)
+ return 0;
+ else
+ return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int ret = 0;
+ u8 status;
+
+ /* one pattern per engine setting led mux start and stop addresses */
+ u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ };
+
+ lp5523_write(client, LP5523_REG_RESET, 0xff);
+
+ usleep_range(10000, 100000);
+
+ ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+ /* Chip startup time after reset is 500 us */
+ usleep_range(1000, 10000);
+
+ ret |= lp5523_write(client, LP5523_REG_CONFIG,
+ LP5523_AUTO_INC | LP5523_PWR_SAVE |
+ LP5523_CP_AUTO | LP5523_AUTO_CLK |
+ LP5523_PWM_PWR_SAVE);
+
+ /* turn on all leds */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+ /* hardcode 32 bytes of memory for each engine from program memory */
+ ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+ ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+ ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+ /* write led mux address space for each channel */
+ ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+ ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+ ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+ if (ret) {
+ dev_err(&client->dev, "could not load mux programs\n");
+ return -1;
+ }
+
+ /* set all engines exec state and mode to run 00101010 */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE,
+ (LP5523_CMD_RUN | LP5523_ENABLE));
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+ if (ret) {
+ dev_err(&client->dev, "could not start mux programs\n");
+ return -1;
+ }
+
+ /* Wait 3ms and check the engine status */
+ usleep_range(3000, 20000);
+ lp5523_read(client, LP5523_REG_STATUS, &status);
+ status &= LP5523_ENG_STATUS_MASK;
+
+ if (status == LP5523_ENG_STATUS_MASK) {
+ dev_dbg(&client->dev, "all engines configured\n");
+ } else {
+ dev_info(&client->dev, "status == %x\n", status);
+ dev_err(&client->dev, "cound not configure LED engine\n");
+ return -1;
+ }
+
+ dev_info(&client->dev, "disabling engines\n");
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+ return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 engine_state;
+
+ ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+ if (ret)
+ goto fail;
+
+ engine_state &= ~(engine->engine_mask);
+
+ /* set mode only for this engine */
+ mode &= engine->engine_mask;
+
+ engine_state |= mode;
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+ return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+ (u8)(mux >> 8));
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+ engine->led_mux = mux;
+
+ return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+ engine->prog_page);
+ ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+ LP5523_PROGRAM_LENGTH, pattern);
+
+ return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE,
+ LP5523_CMD_RUN | LP5523_ENABLE);
+ if (ret)
+ goto fail;
+
+ ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+ return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+ int i;
+ u16 tmp_mux = 0;
+ len = len < LP5523_LEDS ? len : LP5523_LEDS;
+ for (i = 0; i < len; i++) {
+ switch (buf[i]) {
+ case '1':
+ tmp_mux |= (1 << i);
+ break;
+ case '0':
+ break;
+ case '\n':
+ i = len;
+ break;
+ default:
+ return -1;
+ }
+ }
+ *mux = tmp_mux;
+
+ return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+ int i, pos = 0;
+ for (i = 0; i < LP5523_LEDS; i++)
+ pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+ array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/* Sysfs interface */
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ char mux[LP5523_LEDS + 1];
+
+ lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+ return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr) \
+static ssize_t show_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_leds(dev, attr, buf, nr); \
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ u16 mux = 0;
+
+ if (lp5523_mux_parse(buf, &mux, len))
+ return -EINVAL;
+
+ if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+ return -EINVAL;
+
+ return len;
+}
+
+#define store_leds(nr) \
+static ssize_t store_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_leds(dev, attr, buf, len, nr); \
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i, ret, pos = 0;
+ int led = 0;
+ u8 status, adc, vdd;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ /* Check that ext clock is really in use if requested */
+ if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+ if ((status & LP5523_EXT_CLK_USED) == 0)
+ goto fail;
+
+ /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+ lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | 16);
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+ vdd--; /* There may be some fluctuation in measurement */
+
+ for (i = 0; i < LP5523_LEDS; i++) {
+ /* Skip non-existing channels */
+ if (chip->pdata->led_config[i].led_current == 0)
+ continue;
+
+ /* Set default current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->pdata->led_config[i].led_current);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+ /* let current stabilize 2ms before measurements start */
+ usleep_range(2000, 10000);
+ lp5523_write(chip->client,
+ LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | i);
+ /* ledtest takes 2.7ms */
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+ if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+ pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+ /* Restore current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->leds[led].led_current);
+ led++;
+ }
+ if (pos == 0)
+ pos = sprintf(buf, "OK\n");
+ goto release_lock;
+fail:
+ pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+ mutex_unlock(&chip->lock);
+
+ return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp5523_led *led = cdev_to_led(cdev);
+
+ led->brightness = (u8)brightness;
+
+ schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+ struct lp5523_led *led = container_of(work,
+ struct lp5523_led,
+ brightness_work);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ struct i2c_client *client = chip->client;
+
+ mutex_lock(&chip->lock);
+
+ lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+
+ mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+ const char *buf, size_t len)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret, nrchars, offset = 0, i = 0;
+ char c[3];
+ unsigned cmd;
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+ while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto fail;
+ pattern[i] = (u8)cmd;
+
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto fail;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_load_program(engine, pattern);
+ mutex_unlock(&chip->lock);
+
+ if (ret) {
+ dev_err(&client->dev, "failed loading pattern\n");
+ return ret;
+ }
+
+ return len;
+fail:
+ dev_err(&client->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ switch (chip->engines[nr - 1].mode) {
+ case LP5523_CMD_RUN:
+ return sprintf(buf, "run\n");
+ case LP5523_CMD_LOAD:
+ return sprintf(buf, "load\n");
+ case LP5523_CMD_DISABLED:
+ return sprintf(buf, "disabled\n");
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct lp5523_engine *engine = &chip->engines[nr - 1];
+ mutex_lock(&chip->lock);
+
+ if (!strncmp(buf, "run", 3))
+ lp5523_set_mode(engine, LP5523_CMD_RUN);
+ else if (!strncmp(buf, "load", 4))
+ lp5523_set_mode(engine, LP5523_CMD_LOAD);
+ else if (!strncmp(buf, "disabled", 8))
+ lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+ mutex_unlock(&chip->lock);
+ return len;
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ ssize_t ret;
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+ (u8)curr);
+ mutex_unlock(&chip->lock);
+
+ if (ret < 0)
+ return ret;
+
+ led->led_current = (u8)curr;
+
+ return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+ .attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+ show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+ show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+ show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+ show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+ show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+ show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine1_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine2_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+ &dev_attr_engine3_load.attr,
+ &dev_attr_engine3_leds.attr,
+ NULL
+};
+
+static const struct attribute_group lp5523_group = {
+ .attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+ {.attrs = lp5523_engine1_attributes },
+ {.attrs = lp5523_engine2_attributes },
+ {.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ int ret;
+
+ ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+ if (chip->engines[i].mode == LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+ for (i = 0; i < chip->num_leds; i++)
+ sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/* Set chip operating mode */
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+ /* engine to chip */
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ struct device *dev = &client->dev;
+ int ret = 0;
+
+ /* if in that mode already do nothing, except for run */
+ if (mode == engine->mode && mode != LP5523_CMD_RUN)
+ return 0;
+
+ if (mode == LP5523_CMD_RUN) {
+ ret = lp5523_run_program(engine);
+ } else if (mode == LP5523_CMD_LOAD) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret = sysfs_create_group(&dev->kobj, engine->attributes);
+ if (ret)
+ return ret;
+ } else if (mode == LP5523_CMD_DISABLED) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ }
+
+ /* remove load attribute from sysfs if not in load mode */
+ if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, engine->attributes);
+
+ engine->mode = mode;
+
+ return ret;
+}
+
+/*--------------------------------------------------------------*/
+/* Probe, Attach, Remove */
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+ if (id < 1 || id > LP5523_ENGINES)
+ return -1;
+ engine->id = id;
+ engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+ engine->prog_page = id - 1;
+ engine->mux_page = id + 2;
+ engine->attributes = &lp5523_engine_group[id - 1];
+
+ return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+ int chan, struct lp5523_platform_data *pdata)
+{
+ char name[32];
+ int res;
+
+ if (chan >= LP5523_LEDS)
+ return -EINVAL;
+
+ if (pdata->led_config[chan].led_current) {
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+
+ if (led->chan_nr >= LP5523_LEDS) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ LP5523_LEDS - 1);
+ return -EINVAL;
+ }
+
+ snprintf(name, 32, "lp5523:channel%d", chan);
+
+ led->cdev.name = name;
+ led->cdev.brightness_set = lp5523_set_brightness;
+ res = led_classdev_register(dev, &led->cdev);
+ if (res < 0) {
+ dev_err(dev, "couldn't register led on channel %d\n",
+ chan);
+ return res;
+ }
+ res = sysfs_create_group(&led->cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+ if (res < 0) {
+ dev_err(dev, "couldn't register current attribute\n");
+ led_classdev_unregister(&led->cdev);
+ return res;
+ }
+ } else {
+ led->led_current = 0;
+ }
+ return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp5523_chip *chip;
+ struct lp5523_platform_data *pdata;
+ int ret, i, led;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ ret = -EINVAL;
+ goto fail1;
+ }
+
+ mutex_init(&chip->lock);
+
+ chip->pdata = pdata;
+
+ if (pdata->setup_resources) {
+ ret = pdata->setup_resources();
+ if (ret < 0)
+ goto fail1;
+ }
+
+ if (pdata->enable) {
+ pdata->enable(0);
+ usleep_range(1000, 10000);
+ pdata->enable(1);
+ usleep_range(1000, 10000); /* Spec says min 500us */
+ }
+
+ ret = lp5523_detect(client);
+ if (ret)
+ goto fail2;
+
+ dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+ /* Initialize engines */
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ ret = lp5523_init_engine(&chip->engines[i], i + 1);
+ if (ret) {
+ dev_err(&client->dev, "error initializing engine\n");
+ goto fail2;
+ }
+ }
+ ret = lp5523_configure(client);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring chip\n");
+ goto fail2;
+ }
+
+ /* Initialize leds */
+ chip->num_channels = pdata->num_channels;
+ chip->num_leds = 0;
+ led = 0;
+ for (i = 0; i < pdata->num_channels; i++) {
+ /* Do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+ if (ret) {
+ dev_err(&client->dev, "error initializing leds\n");
+ goto fail3;
+ }
+ chip->num_leds++;
+
+ chip->leds[led].id = led;
+ /* Set LED current */
+ lp5523_write(client,
+ LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+ chip->leds[led].led_current);
+
+ INIT_WORK(&(chip->leds[led].brightness_work),
+ lp5523_led_brightness_work);
+
+ led++;
+ }
+
+ ret = lp5523_register_sysfs(client);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto fail3;
+ }
+ return ret;
+fail3:
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+fail2:
+ if (pdata->enable)
+ pdata->enable(0);
+ if (pdata->release_resources)
+ pdata->release_resources();
+fail1:
+ kfree(chip);
+ return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i;
+
+ lp5523_unregister_sysfs(client);
+
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+
+ if (chip->pdata->enable)
+ chip->pdata->enable(0);
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+ kfree(chip);
+ return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+ { "lp5523", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+ .driver = {
+ .name = "lp5523",
+ },
+ .probe = lp5523_probe,
+ .remove = lp5523_remove,
+ .id_table = lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&lp5523_driver);
+
+ if (ret < 0)
+ printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+ return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+ i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
}
arch_initcall(soekris_init);
+
+MODULE_LICENSE("GPL");
*/
#include <linux/module.h>
-#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/leds.h>
-#include <linux/slab.h>
#include "leds.h"
-struct timer_trig_data {
- int brightness_on; /* LED brightness during "on" period.
- * (LED_OFF < brightness_on <= LED_FULL)
- */
- unsigned long delay_on; /* milliseconds on */
- unsigned long delay_off; /* milliseconds off */
- struct timer_list timer;
-};
-
-static void led_timer_function(unsigned long data)
-{
- struct led_classdev *led_cdev = (struct led_classdev *) data;
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- unsigned long brightness;
- unsigned long delay;
-
- if (!timer_data->delay_on || !timer_data->delay_off) {
- led_set_brightness(led_cdev, LED_OFF);
- return;
- }
-
- brightness = led_get_brightness(led_cdev);
- if (!brightness) {
- /* Time to switch the LED on. */
- brightness = timer_data->brightness_on;
- delay = timer_data->delay_on;
- } else {
- /* Store the current brightness value to be able
- * to restore it when the delay_off period is over.
- */
- timer_data->brightness_on = brightness;
- brightness = LED_OFF;
- delay = timer_data->delay_off;
- }
-
- led_set_brightness(led_cdev, brightness);
-
- mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
-}
-
static ssize_t led_delay_on_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- return sprintf(buf, "%lu\n", timer_data->delay_on);
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
}
static ssize_t led_delay_on_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
count++;
if (count == size) {
- if (timer_data->delay_on != state) {
- /* the new value differs from the previous */
- timer_data->delay_on = state;
-
- /* deactivate previous settings */
- del_timer_sync(&timer_data->timer);
-
- /* try to activate hardware acceleration, if any */
- if (!led_cdev->blink_set ||
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off)) {
- /* no hardware acceleration, blink via timer */
- mod_timer(&timer_data->timer, jiffies + 1);
- }
- }
+ led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
ret = count;
}
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- return sprintf(buf, "%lu\n", timer_data->delay_off);
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
}
static ssize_t led_delay_off_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
count++;
if (count == size) {
- if (timer_data->delay_off != state) {
- /* the new value differs from the previous */
- timer_data->delay_off = state;
-
- /* deactivate previous settings */
- del_timer_sync(&timer_data->timer);
-
- /* try to activate hardware acceleration, if any */
- if (!led_cdev->blink_set ||
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off)) {
- /* no hardware acceleration, blink via timer */
- mod_timer(&timer_data->timer, jiffies + 1);
- }
- }
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
ret = count;
}
static void timer_trig_activate(struct led_classdev *led_cdev)
{
- struct timer_trig_data *timer_data;
int rc;
- timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
- if (!timer_data)
- return;
-
- timer_data->brightness_on = led_get_brightness(led_cdev);
- if (timer_data->brightness_on == LED_OFF)
- timer_data->brightness_on = led_cdev->max_brightness;
- led_cdev->trigger_data = timer_data;
-
- init_timer(&timer_data->timer);
- timer_data->timer.function = led_timer_function;
- timer_data->timer.data = (unsigned long) led_cdev;
+ led_cdev->trigger_data = NULL;
rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
if (rc)
- goto err_out;
+ return;
rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
if (rc)
goto err_out_delayon;
- /* If there is hardware support for blinking, start one
- * user friendly blink rate chosen by the driver.
- */
- if (led_cdev->blink_set)
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off);
+ led_cdev->trigger_data = (void *)1;
return;
err_out_delayon:
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
-err_out:
- led_cdev->trigger_data = NULL;
- kfree(timer_data);
}
static void timer_trig_deactivate(struct led_classdev *led_cdev)
{
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- unsigned long on = 0, off = 0;
-
- if (timer_data) {
+ if (led_cdev->trigger_data) {
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
device_remove_file(led_cdev->dev, &dev_attr_delay_off);
- del_timer_sync(&timer_data->timer);
- kfree(timer_data);
}
- /* If there is hardware support for blinking, stop it */
- if (led_cdev->blink_set)
- led_cdev->blink_set(led_cdev, &on, &off);
+ /* Stop blinking */
+ led_brightness_set(led_cdev, LED_OFF);
}
static struct led_trigger timer_led_trigger = {
static void adb_iop_complete(struct iop_msg *msg)
{
struct adb_request *req;
- uint flags;
+ unsigned long flags;
local_irq_save(flags);
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message;
struct adb_request *req;
- uint flags;
+ unsigned long flags;
#ifdef DEBUG_ADB_IOP
int i;
#endif
/* return the offset of the super block in 512byte sectors */
static inline sector_t calc_dev_sboffset(struct block_device *bdev)
{
- sector_t num_sectors = bdev->bd_inode->i_size / 512;
+ sector_t num_sectors = i_size_read(bdev->bd_inode) / 512;
return MD_NEW_SIZE_SECTORS(num_sectors);
}
*/
switch(minor_version) {
case 0:
- sb_start = rdev->bdev->bd_inode->i_size >> 9;
+ sb_start = i_size_read(rdev->bdev->bd_inode) >> 9;
sb_start -= 8*2;
sb_start &= ~(sector_t)(4*2-1);
break;
ret = 0;
}
if (minor_version)
- rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+ rdev->sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
le64_to_cpu(sb->data_offset);
else
rdev->sectors = rdev->sb_start;
return 0; /* component must fit device */
if (rdev->sb_start < rdev->data_offset) {
/* minor versions 1 and 2; superblock before data */
- max_sectors = rdev->bdev->bd_inode->i_size >> 9;
+ max_sectors = i_size_read(rdev->bdev->bd_inode) >> 9;
max_sectors -= rdev->data_offset;
if (!num_sectors || num_sectors > max_sectors)
num_sectors = max_sectors;
} else {
/* minor version 0; superblock after data */
sector_t sb_start;
- sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2;
+ sb_start = (i_size_read(rdev->bdev->bd_inode) >> 9) - 8*2;
sb_start &= ~(sector_t)(4*2 - 1);
max_sectors = rdev->sectors + sb_start - rdev->sb_start;
if (!num_sectors || num_sectors > max_sectors)
if (!sectors)
return -EBUSY;
} else if (!sectors)
- sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+ sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
rdev->data_offset;
}
if (sectors < my_mddev->dev_sectors)
kobject_init(&rdev->kobj, &rdev_ktype);
- size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
+ size = i_size_read(rdev->bdev->bd_inode) >> BLOCK_SIZE_BITS;
if (!size) {
printk(KERN_WARNING
"md: %s has zero or unknown size, marking faulty!\n",
if (!mddev->persistent) {
printk(KERN_INFO "md: nonpersistent superblock ...\n");
- rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
- } else
+ rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
+ } else
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
rdev->sectors = rdev->sb_start;
if (mddev->persistent)
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
else
- rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
+ rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
rdev->sectors = rdev->sb_start;
config VIDEO_DEV
tristate "Video For Linux"
- depends on BKL # used in many drivers for ioctl handling, need to kill
---help---
V4L core support for video capture and overlay devices, webcams and
AM/FM radio cards.
/*****************************************************************************/
/* i2c-adapter helper functions */
-#include <linux/i2c-id.h>
/* exported algorithm data */
static struct i2c_algorithm saa7146_algo = {
struct dibx000_i2c_master *mst)
{
strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
+ i2c_adap->algo = algo;
i2c_adap->algo_data = NULL;
i2c_set_adapdata(i2c_adap, mst);
if (i2c_add_adapter(i2c_adap) < 0)
sensor_cfg.clock_speed = 45;
cam->sensor_addr = 0x42;
- cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
- NULL, "ov7670", cam->sensor_addr, NULL);
+ cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
+ "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr,
+ NULL);
if (cam->sensor == NULL) {
ret = -ENODEV;
goto out_smbus;
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
-#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
dev = h;
}
- if (dev == NULL) {
- unlock_kernel();
+ if (dev == NULL)
return -ENODEV;
- }
+
mutex_lock(&dev->lock);
/* allocate + initialize per filehandle data */
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
- if (NULL == fh) {
- unlock_kernel();
+ if (!fh)
return -ENOMEM;
- }
-
- lock_kernel();
file->private_data = fh;
fh->dev = dev;
V4L2_FIELD_INTERLACED,
sizeof(struct cx23885_buffer),
fh, NULL);
- unlock_kernel();
-
return 0;
}
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kthread.h>
if (NULL == fh)
return -ENOMEM;
- lock_kernel();
-
file->private_data = fh;
fh->dev = dev;
fh->radio = radio;
dprintk(1, "post videobuf_queue_init()\n");
- unlock_kernel();
-
return 0;
}
ret = imx074_video_probe(icd, client);
if (ret < 0) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
return ret;
}
icd->ops = NULL;
if (icl->free_bus)
icl->free_bus(icl);
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(priv);
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/workqueue.h>
#include <media/ir-core.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
+#include <media/videobuf-core.h>
#include <media/videobuf-dma-contig.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
static int mx2_camera_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
- struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
- struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
const struct soc_camera_format_xlate *xlate;
struct v4l2_pix_format *pix = &f->fmt.pix;
static int mx2_camera_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
- struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
- struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
const struct soc_camera_format_xlate *xlate;
struct v4l2_pix_format *pix = &f->fmt.pix;
return 0;
}
-static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+static int mx2_camera_reqbufs(struct soc_camera_device *icd,
struct v4l2_requestbuffers *p)
{
int i;
for (i = 0; i < p->count; i++) {
- struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+ struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i],
struct mx2_buffer, vb);
INIT_LIST_HEAD(&buf->vb.queue);
}
static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
{
- struct soc_camera_file *icf = file->private_data;
+ struct soc_camera_device *icd = file->private_data;
- return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+ return videobuf_poll_stream(file, &icd->vb_vidq, pt);
}
static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
#include <mach/ipu.h>
#include <mach/mx3_camera.h>
+#include <mach/dma.h>
#define MX3_CAM_DRV_NAME "mx3-camera"
struct dma_chan_request *rq = arg;
struct mx3_camera_pdata *pdata;
+ if (!imx_dma_is_ipu(chan))
+ return false;
+
if (!rq)
return false;
BUG_ON(in_interrupt());
- videobuf_waiton(vb, 0, 0);
+ videobuf_waiton(vq, vb, 0, 0);
if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
videobuf_dma_contig_free(vq, vb);
* empty. Since the transfer of the DMA programming register set
* content to the DMA working register set is done automatically
* by the DMA hardware, this can pretty well happen while we
- * are keeping the lock here. Levae fetching it from the queue
+ * are keeping the lock here. Leave fetching it from the queue
* to be done when a next DMA interrupt occures instead.
*/
return;
videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
icd->dev.parent, &pcdev->lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd);
+ sizeof(struct omap1_cam_buf), icd, NULL);
else
videobuf_queue_sg_init(q, &omap1_videobuf_ops,
icd->dev.parent, &pcdev->lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd);
+ sizeof(struct omap1_cam_buf), icd, NULL);
/* use videobuf mode (auto)selected with the module parameter */
pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
}
}
-static int omap1_cam_reqbufs(struct soc_camera_file *icf,
+static int omap1_cam_reqbufs(struct soc_camera_device *icd,
struct v4l2_requestbuffers *p)
{
int i;
* it hadn't triggered
*/
for (i = 0; i < p->count; i++) {
- struct omap1_cam_buf *buf = container_of(icf->vb_vidq.bufs[i],
+ struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i],
struct omap1_cam_buf, vb);
buf->inwork = 0;
INIT_LIST_HEAD(&buf->vb.queue);
static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
{
- struct soc_camera_file *icf = file->private_data;
+ struct soc_camera_device *icd = file->private_data;
struct omap1_cam_buf *buf;
- buf = list_entry(icf->vb_vidq.stream.next, struct omap1_cam_buf,
+ buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf,
vb.stream);
poll_wait(file, &buf->vb.done, pt);
static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
{
- return (width > rect->width >> 1 || height > rect->height >> 1);
+ return width > rect->width >> 1 || height > rect->height >> 1;
}
static u8 to_clkrc(struct v4l2_fract *timeperframe,
coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
coma_set |= COMA_RAW_RGB | COMA_RGB;
break;
- case 0:
- break;
default:
dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
return -EINVAL;
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
{
struct ov6650 *priv = to_ov6650(client);
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
.subvendor = 0x13c2,
.subdevice = 0x2804,
.driver_data = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x5ace, /* Beholder Intl. Ltd. */
+ .subdevice = 0x7190,
+ .driver_data = SAA7134_BOARD_BEHOLD_H7,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x5ace, /* Beholder Intl. Ltd. */
+ .subdevice = 0x7090,
+ .driver_data = SAA7134_BOARD_BEHOLD_A7,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SAA7134_BOARD_UNKNOWN,
- }, {
- .vendor = PCI_VENDOR_ID_PHILIPS,
- .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
- .subvendor = 0x5ace, /* Beholder Intl. Ltd. */
- .subdevice = 0x7190,
- .driver_data = SAA7134_BOARD_BEHOLD_H7,
- }, {
- .vendor = PCI_VENDOR_ID_PHILIPS,
- .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
- .subvendor = 0x5ace, /* Beholder Intl. Ltd. */
- .subdevice = 0x7090,
- .driver_data = SAA7134_BOARD_BEHOLD_A7,
},{
/* --- end of list --- */
}
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/usb.h>
#include "se401.h"
struct usb_se401 *se401 = (struct usb_se401 *)dev;
int err = 0;
- lock_kernel();
+ mutex_lock(&se401->lock);
if (se401->user) {
- unlock_kernel();
+ mutex_unlock(&se401->lock);
return -EBUSY;
}
se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
else
err = -ENOMEM;
se401->user = !err;
- unlock_kernel();
+ mutex_unlock(&se401->lock);
return err;
}
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mm.h>
vdev = video_devdata(fp);
dev = vdev_to_camera(vdev);
- lock_kernel();
if (dev == NULL || !is_present(dev)) {
- unlock_kernel();
return -ENXIO;
}
fp->private_data = dev;
usb_autopm_get_interface(dev->interface);
- unlock_kernel();
return 0;
}
#include <linux/string.h>
#include <linux/types.h>
#include <linux/firmware.h>
-#include <linux/smp_lock.h>
#include "vendorcmds.h"
#include "pd-common.h"
/*unregister v4l2 device */
v4l2_device_unregister(&pd->v4l2_dev);
- lock_kernel();
- {
- pd_dvb_usb_device_exit(pd);
- poseidon_fm_exit(pd);
+ pd_dvb_usb_device_exit(pd);
+ poseidon_fm_exit(pd);
- poseidon_audio_free(pd);
- pd_video_exit(pd);
- }
- unlock_kernel();
+ poseidon_audio_free(pd);
+ pd_video_exit(pd);
usb_set_intfdata(interface, NULL);
kref_put(&pd->kref, poseidon_delete);
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
return -EINVAL;
}
- /* the videodev_lock held above us protects us from
- * simultaneous opens...for now. we probably shouldn't
- * rely on this fact forever.
+ /* cam_lock/open_count protects us from simultaneous opens
+ * ... for now. we probably shouldn't rely on this fact forever.
*/
- lock_kernel();
+ mutex_lock(&cam->cam_lock);
if (cam->open_count > 0) {
printk(KERN_INFO
"vicam_open called on already opened camera");
- unlock_kernel();
+ mutex_unlock(&cam->cam_lock);
return -EBUSY;
}
cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
if (!cam->raw_image) {
- unlock_kernel();
+ mutex_unlock(&cam->cam_lock);
return -ENOMEM;
}
cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
if (!cam->framebuf) {
kfree(cam->raw_image);
- unlock_kernel();
+ mutex_unlock(&cam->cam_lock);
return -ENOMEM;
}
if (!cam->cntrlbuf) {
kfree(cam->raw_image);
rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
- unlock_kernel();
+ mutex_unlock(&cam->cam_lock);
return -ENOMEM;
}
+ cam->needsDummyRead = 1;
+ cam->open_count++;
+
+ file->private_data = cam;
+ mutex_unlock(&cam->cam_lock);
+
+
// First upload firmware, then turn the camera on
if (!cam->is_initialized) {
set_camera_power(cam, 1);
- cam->needsDummyRead = 1;
- cam->open_count++;
-
- file->private_data = cam;
- unlock_kernel();
-
return 0;
}
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
mutex_unlock(vdev->lock);
} else if (vdev->fops->ioctl) {
/* TODO: convert all drivers to unlocked_ioctl */
- lock_kernel();
+ static DEFINE_MUTEX(v4l2_ioctl_mutex);
+
+ mutex_lock(&v4l2_ioctl_mutex);
if (video_is_registered(vdev))
ret = vdev->fops->ioctl(filp, cmd, arg);
- unlock_kernel();
+ mutex_unlock(&v4l2_ioctl_mutex);
} else
ret = -ENOTTY;
struct videocodec *vfe; /* video front end */
struct mutex resource_lock; /* prevent evil stuff */
+ struct mutex other_lock; /* please merge with above */
u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
spin_lock_init(&zr->spinlock);
mutex_init(&zr->resource_lock);
+ mutex_init(&zr->other_lock);
if (pci_enable_device(pdev))
goto zr_unreg;
pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n",
ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1);
- lock_kernel();
+ mutex_lock(&zr->other_lock);
if (zr->user >= 2048) {
dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
file->private_data = fh;
fh->zr = zr;
zoran_open_init_session(fh);
- unlock_kernel();
+ mutex_unlock(&zr->other_lock);
return 0;
fail_fh:
kfree(fh);
fail_unlock:
- unlock_kernel();
+ mutex_unlock(&zr->other_lock);
dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
ZR_DEVNAME(zr), res, zr->user);
/* kernel locks (fs/device.c), so don't do that ourselves
* (prevents deadlocks) */
- /*mutex_lock(&zr->resource_lock);*/
+ mutex_lock(&zr->other_lock);
zoran_close_end_session(fh);
encoder_call(zr, video, s_routing, 2, 0, 0);
}
}
+ mutex_unlock(&zr->other_lock);
file->private_data = NULL;
kfree(fh->overlay_mask);
#endif
};
+/* please use zr->resource_lock consistently and kill this wrapper */
+static long zoran_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct zoran_fh *fh = file->private_data;
+ struct zoran *zr = fh->zr;
+ int ret;
+
+ mutex_lock(&zr->other_lock);
+ ret = video_ioctl2(file, cmd, arg);
+ mutex_unlock(&zr->other_lock);
+
+ return ret;
+}
+
static const struct v4l2_file_operations zoran_fops = {
.owner = THIS_MODULE,
.open = zoran_open,
.release = zoran_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = zoran_ioctl,
.read = zoran_read,
.write = zoran_write,
.mmap = zoran_mmap,
{
struct i2c_client *client = to_i2c_client(dev);
struct als_data *data = i2c_get_clientdata(client);
- unsigned int ret_val;
+ int ret_val;
unsigned long val;
if (strict_strtoul(buf, 10, &val))
return res;
als_error1:
- i2c_set_clientdata(client, NULL);
kfree(data);
return res;
}
{
struct bh1770_chip *chip = dev_get_drvdata(dev);
unsigned long value;
- size_t ret;
+ ssize_t ret;
if (strict_strtoul(buf, 0, &value))
return -EINVAL;
pm_runtime_get_sync(dev);
ret = bh1770_lux_rate(chip, chip->lux_rate_index);
- ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+ if (ret < 0) {
+ pm_runtime_put(dev);
+ goto leave;
+ }
+ ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
if (ret < 0) {
pm_runtime_put(dev);
goto leave;
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
- unsigned int ret_val;
+ int ret_val;
unsigned long val;
if (strict_strtoul(buf, 10, &val))
val = 4;
ret_val = i2c_smbus_read_byte_data(client, 0x00);
+ if (ret_val < 0)
+ return ret_val;
ret_val &= 0xFC; /*reset the bit before setting them */
ret_val |= val - 1;
atl1_pcie_patch(adapter);
/* assume we have no link for now */
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
setup_timer(&adapter->phy_config_timer, atl1_phy_config,
(unsigned long)adapter);
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.00-3"
-#define DRV_MODULE_RELDATE "2010/10/19"
+#define DRV_MODULE_VERSION "1.60.00-4"
+#define DRV_MODULE_RELDATE "2010/11/01"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
rc = XMIT_PLAIN;
else {
- if (skb->protocol == htons(ETH_P_IPV6)) {
+ if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
rc = XMIT_CSUM_V6;
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
rc |= XMIT_CSUM_TCP;
u16 xgxs_config_tx[4]; /* 0x1A0 */
- u32 Reserved1[57]; /* 0x1A8 */
+ u32 Reserved1[56]; /* 0x1A8 */
+ u32 default_cfg; /* 0x288 */
+ /* Enable BAM on KR */
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000
+
u32 speed_capability_mask2; /* 0x28C */
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0
/* reset and unreset the BigMac */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- udelay(10);
+ msleep(1);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
/* Enable CL37 BAM */
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8073_BAM, &val);
- bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8073_BAM, val | 1);
+ if (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
+ PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, &val);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, val | 1);
+ DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");
+ }
if (params->loopback_mode == LOOPBACK_EXT) {
bnx2x_807x_force_10G(bp, phy);
DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");
{
struct bnx2x *bp = params->bp;
u16 autoneg_val, an_1000_val, an_10_100_val;
- bnx2x_wait_reset_complete(bp, phy);
+
bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
1 << NIG_LATCH_BC_ENABLE_MI_INT);
/* HW reset */
bnx2x_ext_phy_hw_reset(bp, params->port);
+ bnx2x_wait_reset_complete(bp, phy);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
return bnx2x_848xx_cmn_config_init(phy, params, vars);
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u8 port = params->port, initialize = 1;
+ u8 port, initialize = 1;
u16 val;
u16 temp;
u32 actual_phy_selection;
/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
msleep(1);
+ if (CHIP_IS_E2(bp))
+ port = BP_PATH(bp);
+ else
+ port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
port);
- msleep(200); /* 100 is not enough */
-
+ bnx2x_wait_reset_complete(bp, phy);
+ /* Wait for GPHY to come out of reset */
+ msleep(50);
/* BCM84823 requires that XGXS links up first @ 10G for normal
behavior */
temp = vars->line_speed;
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 port = params->port;
+ u8 port;
+ if (CHIP_IS_E2(bp))
+ port = BP_PATH(bp);
+ else
+ port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_LOW,
port);
u8 reset_ext_phy)
{
struct bnx2x *bp = params->bp;
- u8 phy_index, port = params->port;
+ u8 phy_index, port = params->port, clear_latch_ind = 0;
DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
/* disable attentions */
vars->link_status = 0;
params->phy[phy_index].link_reset(
¶ms->phy[phy_index],
params);
+ if (params->phy[phy_index].flags &
+ FLAGS_REARM_LATCH_SIGNAL)
+ clear_latch_ind = 1;
}
}
+ if (clear_latch_ind) {
+ /* Clear latching indication */
+ bnx2x_rearm_latch_signal(bp, port, 0);
+ bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4,
+ 1 << NIG_LATCH_BC_ENABLE_MI_INT);
+ }
if (params->phy[INT_PHY].link_reset)
params->phy[INT_PHY].link_reset(
¶ms->phy[INT_PHY], params);
s8 port;
s8 port_of_path = 0;
+ bnx2x_ext_phy_hw_reset(bp, 0);
/* PART1 - Reset both phys */
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
u32 shmem_base, shmem2_base;
return -EINVAL;
}
/* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+ port_of_path*4,
(NIG_MASK_XGXS0_LINK_STATUS |
NIG_MASK_XGXS0_LINK10G |
NIG_MASK_SERDES0_LINK_STATUS |
(1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
- bnx2x_ext_phy_hw_reset(bp, 1);
+ bnx2x_ext_phy_hw_reset(bp, 0);
msleep(5);
for (port = 0; port < PORT_MAX; port++) {
u32 shmem_base, shmem2_base;
MODULE_AUTHOR("Daniel Martensson<daniel.martensson@stericsson.com>");
MODULE_DESCRIPTION("CAIF SPI driver");
+/* Returns the number of padding bytes for alignment. */
+#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
+
static int spi_loop;
module_param(spi_loop, bool, S_IRUGO);
MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
module_param(spi_frm_align, int, S_IRUGO);
MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
-/* SPI padding options. */
+/*
+ * SPI padding options.
+ * Warning: must be a base of 2 (& operation used) and can not be zero !
+ */
module_param(spi_up_head_align, int, S_IRUGO);
MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
static const struct file_operations dbgfs_state_fops = {
.open = dbgfs_open,
.read = dbgfs_state,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
+ .owner = THIS_MODULE
};
static const struct file_operations dbgfs_frame_fops = {
.open = dbgfs_open,
.read = dbgfs_frame,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
+ .owner = THIS_MODULE
};
static inline void dev_debugfs_add(struct cfspi *cfspi)
u8 *dst = buf;
caif_assert(buf);
+ if (cfspi->slave && !cfspi->slave_talked)
+ cfspi->slave_talked = true;
+
do {
struct sk_buff *skb;
struct caif_payload_info *info;
* Compute head offset i.e. number of bytes to add to
* get the start of the payload aligned.
*/
- if (spi_up_head_align) {
- spad = 1 + ((info->hdr_len + 1) & spi_up_head_align);
+ if (spi_up_head_align > 1) {
+ spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
*dst = (u8)(spad - 1);
dst += spad;
}
* Compute tail offset i.e. number of bytes to add to
* get the complete CAIF frame aligned.
*/
- epad = (skb->len + spad) & spi_up_tail_align;
+ epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
dst += epad;
dev_kfree_skb(skb);
* Compute head offset i.e. number of bytes to add to
* get the start of the payload aligned.
*/
- if (spi_up_head_align)
- spad = 1 + ((info->hdr_len + 1) & spi_up_head_align);
+ if (spi_up_head_align > 1)
+ spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
/*
* Compute tail offset i.e. number of bytes to add to
* get the complete CAIF frame aligned.
*/
- epad = (skb->len + spad) & spi_up_tail_align;
+ epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) {
skb_queue_tail(&cfspi->chead, skb);
} else {
/* Put back packet. */
skb_queue_head(&cfspi->qhead, skb);
+ break;
}
} while (pkts <= CAIF_MAX_SPI_PKTS);
{
struct cfspi *cfspi = (struct cfspi *)ifc->priv;
+ /*
+ * The slave device is the master on the link. Interrupts before the
+ * slave has transmitted are considered spurious.
+ */
+ if (cfspi->slave && !cfspi->slave_talked) {
+ printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n");
+ return;
+ }
+
if (!in_interrupt())
spin_lock(&cfspi->lock);
if (assert) {
spin_unlock(&cfspi->lock);
/* Wake up the xfer thread. */
- wake_up_interruptible(&cfspi->wait);
+ if (assert)
+ wake_up_interruptible(&cfspi->wait);
}
static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc)
* Compute head offset i.e. number of bytes added to
* get the start of the payload aligned.
*/
- if (spi_down_head_align) {
+ if (spi_down_head_align > 1) {
spad = 1 + *src;
src += spad;
}
* Compute tail offset i.e. number of bytes added to
* get the complete CAIF frame aligned.
*/
- epad = (pkt_len + spad) & spi_down_tail_align;
+ epad = PAD_POW2((pkt_len + spad), spi_down_tail_align);
src += epad;
} while ((src - buf) < len);
cfspi->ndev = ndev;
cfspi->pdev = pdev;
- /* Set flow info */
+ /* Set flow info. */
cfspi->flow_off_sent = 0;
cfspi->qd_low_mark = LOW_WATER_MARK;
cfspi->qd_high_mark = HIGH_WATER_MARK;
+ /* Set slave info. */
+ if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) {
+ cfspi->slave = true;
+ cfspi->slave_talked = false;
+ } else {
+ cfspi->slave = false;
+ cfspi->slave_talked = false;
+ }
+
/* Assign the SPI device. */
cfspi->dev = dev;
/* Assign the device ifc to this SPI interface. */
#endif
int spi_frm_align = 2;
-int spi_up_head_align = 1;
-int spi_up_tail_align;
-int spi_down_head_align = 3;
-int spi_down_tail_align = 1;
+
+/*
+ * SPI padding options.
+ * Warning: must be a base of 2 (& operation used) and can not be zero !
+ */
+int spi_up_head_align = 1 << 1;
+int spi_up_tail_align = 1 << 0;
+int spi_down_head_align = 1 << 2;
+int spi_down_tail_align = 1 << 1;
#ifdef CONFIG_DEBUG_FS
static inline void debugfs_store_prev(struct cfspi *cfspi)
adapter->name = adapter->port[i]->name;
__set_bit(i, &adapter->registered_device_map);
- netif_tx_stop_all_queues(adapter->port[i]);
}
}
if (!adapter->registered_device_map) {
__set_bit(i, &adapter->registered_device_map);
adapter->chan_map[adap2pinfo(adapter, i)->tx_chan] = i;
- netif_tx_stop_all_queues(adapter->port[i]);
}
}
if (!adapter->registered_device_map) {
if (err)
return err;
set_bit(pi->port_id, &adapter->open_device_map);
- link_start(dev);
+ err = link_start(dev);
+ if (err)
+ return err;
netif_tx_start_all_queues(dev);
return 0;
}
return 0;
}
-/*
- * Return a TX Queue on which to send the specified skb.
- */
-static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- /*
- * XXX For now just use the default hash but we probably want to
- * XXX look at other possibilities ...
- */
- return skb_tx_hash(dev, skb);
-}
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Poll all of our receive queues. This is called outside of normal interrupt
return err;
}
+ /*
+ * Some environments do not properly handle PCIE FLRs -- e.g. in Linux
+ * 2.6.31 and later we can't call pci_reset_function() in order to
+ * issue an FLR because of a self- deadlock on the device semaphore.
+ * Meanwhile, the OS infrastructure doesn't issue FLRs in all the
+ * cases where they're needed -- for instance, some versions of KVM
+ * fail to reset "Assigned Devices" when the VM reboots. Therefore we
+ * use the firmware based reset in order to reset any per function
+ * state.
+ */
+ err = t4vf_fw_reset(adapter);
+ if (err < 0) {
+ dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err);
+ return err;
+ }
+
/*
* Grab basic operational parameters. These will predominantly have
* been set up by the Physical Function Driver or will be hard coded
.ndo_get_stats = cxgb4vf_get_stats,
.ndo_set_rx_mode = cxgb4vf_set_rxmode,
.ndo_set_mac_address = cxgb4vf_set_mac_addr,
- .ndo_select_queue = cxgb4vf_select_queue,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = cxgb4vf_do_ioctl,
.ndo_change_mtu = cxgb4vf_change_mtu,
pi->xact_addr_filt = -1;
pi->rx_offload = RX_CSO;
netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
netdev->irq = pdev->irq;
netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
netdev->do_ioctl = cxgb4vf_do_ioctl;
netdev->change_mtu = cxgb4vf_change_mtu;
netdev->set_mac_address = cxgb4vf_set_mac_addr;
- netdev->select_queue = cxgb4vf_select_queue;
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = cxgb4vf_poll_controller;
#endif
CH_DEVICE(0x4800, 0), /* T440-dbg */
CH_DEVICE(0x4801, 0), /* T420-cr */
CH_DEVICE(0x4802, 0), /* T422-cr */
+ CH_DEVICE(0x4803, 0), /* T440-cr */
+ CH_DEVICE(0x4804, 0), /* T420-bch */
+ CH_DEVICE(0x4805, 0), /* T440-bch */
+ CH_DEVICE(0x4806, 0), /* T460-ch */
+ CH_DEVICE(0x4807, 0), /* T420-so */
+ CH_DEVICE(0x4808, 0), /* T420-cx */
+ CH_DEVICE(0x4809, 0), /* T420-bt */
+ CH_DEVICE(0x480a, 0), /* T404-bt */
{ 0, }
};
*/
RX_COPY_THRES = 256,
RX_PULL_LEN = 128,
-};
-/*
- * Can't define this in the above enum because PKTSHIFT isn't a constant in
- * the VF Driver ...
- */
-#define RX_PKT_PULL_LEN (RX_PULL_LEN + PKTSHIFT)
+ /*
+ * Main body length for sk_buffs used for RX Ethernet packets with
+ * fragments. Should be >= RX_PULL_LEN but possibly bigger to give
+ * pskb_may_pull() some room.
+ */
+ RX_SKB_LEN = 512,
+};
/*
* Software state per TX descriptor.
return NETDEV_TX_OK;
}
+/**
+ * t4vf_pktgl_to_skb - build an sk_buff from a packet gather list
+ * @gl: the gather list
+ * @skb_len: size of sk_buff main body if it carries fragments
+ * @pull_len: amount of data to move to the sk_buff's main body
+ *
+ * Builds an sk_buff from the given packet gather list. Returns the
+ * sk_buff or %NULL if sk_buff allocation failed.
+ */
+struct sk_buff *t4vf_pktgl_to_skb(const struct pkt_gl *gl,
+ unsigned int skb_len, unsigned int pull_len)
+{
+ struct sk_buff *skb;
+ struct skb_shared_info *ssi;
+
+ /*
+ * If the ingress packet is small enough, allocate an skb large enough
+ * for all of the data and copy it inline. Otherwise, allocate an skb
+ * with enough room to pull in the header and reference the rest of
+ * the data via the skb fragment list.
+ *
+ * Below we rely on RX_COPY_THRES being less than the smallest Rx
+ * buff! size, which is expected since buffers are at least
+ * PAGE_SIZEd. In this case packets up to RX_COPY_THRES have only one
+ * fragment.
+ */
+ if (gl->tot_len <= RX_COPY_THRES) {
+ /* small packets have only one fragment */
+ skb = alloc_skb(gl->tot_len, GFP_ATOMIC);
+ if (unlikely(!skb))
+ goto out;
+ __skb_put(skb, gl->tot_len);
+ skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
+ } else {
+ skb = alloc_skb(skb_len, GFP_ATOMIC);
+ if (unlikely(!skb))
+ goto out;
+ __skb_put(skb, pull_len);
+ skb_copy_to_linear_data(skb, gl->va, pull_len);
+
+ ssi = skb_shinfo(skb);
+ ssi->frags[0].page = gl->frags[0].page;
+ ssi->frags[0].page_offset = gl->frags[0].page_offset + pull_len;
+ ssi->frags[0].size = gl->frags[0].size - pull_len;
+ if (gl->nfrags > 1)
+ memcpy(&ssi->frags[1], &gl->frags[1],
+ (gl->nfrags-1) * sizeof(skb_frag_t));
+ ssi->nr_frags = gl->nfrags;
+
+ skb->len = gl->tot_len;
+ skb->data_len = skb->len - pull_len;
+ skb->truesize += skb->data_len;
+
+ /* Get a reference for the last page, we don't own it */
+ get_page(gl->frags[gl->nfrags - 1].page);
+ }
+
+out:
+ return skb;
+}
+
/**
* t4vf_pktgl_free - free a packet gather list
* @gl: the gather list
{
struct sk_buff *skb;
struct port_info *pi;
- struct skb_shared_info *ssi;
const struct cpl_rx_pkt *pkt = (void *)&rsp[1];
bool csum_ok = pkt->csum_calc && !pkt->err_vec;
- unsigned int len = be16_to_cpu(pkt->len);
struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
/*
}
/*
- * If the ingress packet is small enough, allocate an skb large enough
- * for all of the data and copy it inline. Otherwise, allocate an skb
- * with enough room to pull in the header and reference the rest of
- * the data via the skb fragment list.
+ * Convert the Packet Gather List into an skb.
*/
- if (len <= RX_COPY_THRES) {
- /* small packets have only one fragment */
- skb = alloc_skb(gl->frags[0].size, GFP_ATOMIC);
- if (!skb)
- goto nomem;
- __skb_put(skb, gl->frags[0].size);
- skb_copy_to_linear_data(skb, gl->va, gl->frags[0].size);
- } else {
- skb = alloc_skb(RX_PKT_PULL_LEN, GFP_ATOMIC);
- if (!skb)
- goto nomem;
- __skb_put(skb, RX_PKT_PULL_LEN);
- skb_copy_to_linear_data(skb, gl->va, RX_PKT_PULL_LEN);
-
- ssi = skb_shinfo(skb);
- ssi->frags[0].page = gl->frags[0].page;
- ssi->frags[0].page_offset = (gl->frags[0].page_offset +
- RX_PKT_PULL_LEN);
- ssi->frags[0].size = gl->frags[0].size - RX_PKT_PULL_LEN;
- if (gl->nfrags > 1)
- memcpy(&ssi->frags[1], &gl->frags[1],
- (gl->nfrags-1) * sizeof(skb_frag_t));
- ssi->nr_frags = gl->nfrags;
- skb->len = len + PKTSHIFT;
- skb->data_len = skb->len - RX_PKT_PULL_LEN;
- skb->truesize += skb->data_len;
-
- /* Get a reference for the last page, we don't own it */
- get_page(gl->frags[gl->nfrags - 1].page);
+ skb = t4vf_pktgl_to_skb(gl, RX_SKB_LEN, RX_PULL_LEN);
+ if (unlikely(!skb)) {
+ t4vf_pktgl_free(gl);
+ rxq->stats.rx_drops++;
+ return 0;
}
-
__skb_pull(skb, PKTSHIFT);
skb->protocol = eth_type_trans(skb, rspq->netdev);
skb_record_rx_queue(skb, rspq->idx);
netif_receive_skb(skb);
return 0;
-
-nomem:
- t4vf_pktgl_free(gl);
- rxq->stats.rx_drops++;
- return 0;
}
/**
}
len = RSPD_LEN(len);
}
+ gl.tot_len = len;
/*
* Gather packet fragments.
int __devinit t4vf_wait_dev_ready(struct adapter *);
int __devinit t4vf_port_init(struct adapter *, int);
+int t4vf_fw_reset(struct adapter *);
int t4vf_query_params(struct adapter *, unsigned int, const u32 *, u32 *);
int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *);
return 0;
}
+/**
+ * t4vf_fw_reset - issue a reset to FW
+ * @adapter: the adapter
+ *
+ * Issues a reset command to FW. For a Physical Function this would
+ * result in the Firmware reseting all of its state. For a Virtual
+ * Function this just resets the state associated with the VF.
+ */
+int t4vf_fw_reset(struct adapter *adapter)
+{
+ struct fw_reset_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RESET_CMD) |
+ FW_CMD_WRITE);
+ cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+ return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
+}
+
/**
* t4vf_query_params - query FW or device parameters
* @adapter: the adapter
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
+ device_set_wakeup_enable(&dev->dev, wol->wolopts & WAKE_MAGIC);
+
spin_lock_irqsave(&priv->bflock, flags);
- priv->wol_en = wol->wolopts & WAKE_MAGIC ? 1 : 0;
- device_set_wakeup_enable(&dev->dev, priv->wol_en);
+ priv->wol_en = !!device_may_wakeup(&dev->dev);
spin_unlock_irqrestore(&priv->bflock, flags);
return 0;
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
netif_carrier_off(ndev);
- netif_stop_queue(ndev);
err = register_netdev(ndev);
if (err) {
#ifdef IXGBE_FCOE
/* adjust for FCoE Sequence Offload */
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- && (skb->protocol == htons(ETH_P_FCOE)) &&
- skb_is_gso(skb)) {
+ && skb_is_gso(skb)
+ && vlan_get_protocol(skb) ==
+ htons(ETH_P_FCOE)) {
hlen = skb_transport_offset(skb) +
sizeof(struct fc_frame_header) +
sizeof(struct fcoe_crc_eof);
static int ixgbe_tso(struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring, struct sk_buff *skb,
- u32 tx_flags, u8 *hdr_len)
+ u32 tx_flags, u8 *hdr_len, __be16 protocol)
{
struct ixgbe_adv_tx_context_desc *context_desc;
unsigned int i;
l4len = tcp_hdrlen(skb);
*hdr_len += l4len;
- if (skb->protocol == htons(ETH_P_IP)) {
+ if (protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
iph->tot_len = 0;
iph->check = 0;
type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
IXGBE_ADVTXD_DTYP_CTXT);
- if (skb->protocol == htons(ETH_P_IP))
+ if (protocol == htons(ETH_P_IP))
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
return false;
}
-static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
+static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb,
+ __be16 protocol)
{
u32 rtn = 0;
- __be16 protocol;
-
- if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
- protocol = ((const struct vlan_ethhdr *)skb->data)->
- h_vlan_encapsulated_proto;
- else
- protocol = skb->protocol;
switch (protocol) {
case cpu_to_be16(ETH_P_IP):
default:
if (unlikely(net_ratelimit()))
e_warn(probe, "partial checksum but proto=%x!\n",
- skb->protocol);
+ protocol);
break;
}
static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags)
+ struct sk_buff *skb, u32 tx_flags,
+ __be16 protocol)
{
struct ixgbe_adv_tx_context_desc *context_desc;
unsigned int i;
IXGBE_ADVTXD_DTYP_CTXT);
if (skb->ip_summed == CHECKSUM_PARTIAL)
- type_tucmd_mlhl |= ixgbe_psum(adapter, skb);
+ type_tucmd_mlhl |= ixgbe_psum(adapter, skb, protocol);
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
/* use index zero for tx checksum offload */
}
static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
- int queue, u32 tx_flags)
+ int queue, u32 tx_flags, __be16 protocol)
{
struct ixgbe_atr_input atr_input;
struct tcphdr *th;
u8 l4type = 0;
/* Right now, we support IPv4 only */
- if (skb->protocol != htons(ETH_P_IP))
+ if (protocol != htons(ETH_P_IP))
return;
/* check if we're UDP or TCP */
if (iph->protocol == IPPROTO_TCP) {
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
int txq = smp_processor_id();
-
#ifdef IXGBE_FCOE
- if ((skb->protocol == htons(ETH_P_FCOE)) ||
- (skb->protocol == htons(ETH_P_FIP))) {
+ __be16 protocol;
+
+ protocol = vlan_get_protocol(skb);
+
+ if ((protocol == htons(ETH_P_FCOE)) ||
+ (protocol == htons(ETH_P_FIP))) {
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
txq += adapter->ring_feature[RING_F_FCOE].mask;
int tso;
int count = 0;
unsigned int f;
+ __be16 protocol;
+
+ protocol = vlan_get_protocol(skb);
if (vlan_tx_tag_present(skb)) {
tx_flags |= vlan_tx_tag_get(skb);
/* for FCoE with DCB, we force the priority to what
* was specified by the switch */
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
- (skb->protocol == htons(ETH_P_FCOE) ||
- skb->protocol == htons(ETH_P_FIP))) {
+ (protocol == htons(ETH_P_FCOE) ||
+ protocol == htons(ETH_P_FIP))) {
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
}
#endif
/* flag for FCoE offloads */
- if (skb->protocol == htons(ETH_P_FCOE))
+ if (protocol == htons(ETH_P_FCOE))
tx_flags |= IXGBE_TX_FLAGS_FCOE;
}
#endif
tx_flags |= IXGBE_TX_FLAGS_FSO;
#endif /* IXGBE_FCOE */
} else {
- if (skb->protocol == htons(ETH_P_IP))
+ if (protocol == htons(ETH_P_IP))
tx_flags |= IXGBE_TX_FLAGS_IPV4;
- tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+ tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len,
+ protocol);
if (tso < 0) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
if (tso)
tx_flags |= IXGBE_TX_FLAGS_TSO;
- else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+ else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags,
+ protocol) &&
(skb->ip_summed == CHECKSUM_PARTIAL))
tx_flags |= IXGBE_TX_FLAGS_CSUM;
}
test_bit(__IXGBE_FDIR_INIT_DONE,
&tx_ring->reinit_state)) {
ixgbe_atr(adapter, skb, tx_ring->queue_index,
- tx_flags);
+ tx_flags, protocol);
tx_ring->atr_count = 0;
}
}
* Tell stack that we are not ready to work until open()
*/
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- /*
- * Register netdev
- */
rc = register_netdev(netdev);
if (rc) {
pr_err("Cannot register net device\n");
MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
-MODULE_FIRMWARE(NX_P2_MN_ROMIMAGE_NAME);
-MODULE_FIRMWARE(NX_P3_CT_ROMIMAGE_NAME);
-MODULE_FIRMWARE(NX_P3_MN_ROMIMAGE_NAME);
MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
char netxen_nic_driver_name[] = "netxen_nic";
typedef struct axnet_dev_t {
struct pcmcia_device *p_dev;
- caddr_t base;
- struct timer_list watchdog;
- int stale, fast_poll;
- u_short link_status;
- u_char duplex_flag;
- int phy_id;
- int flags;
+ caddr_t base;
+ struct timer_list watchdog;
+ int stale, fast_poll;
+ u_short link_status;
+ u_char duplex_flag;
+ int phy_id;
+ int flags;
+ int active_low;
} axnet_dev_t;
static inline axnet_dev_t *PRIV(struct net_device *dev)
if (info->flags & IS_AX88790)
outb(0x10, dev->base_addr + AXNET_GPIO); /* select Internal PHY */
+ info->active_low = 0;
+
for (i = 0; i < 32; i++) {
j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
if ((j != 0) && (j != 0xffff)) break;
}
- /* Maybe PHY is in power down mode. (PPD_SET = 1)
- Bit 2 of CCSR is active low. */
if (i == 32) {
+ /* Maybe PHY is in power down mode. (PPD_SET = 1)
+ Bit 2 of CCSR is active low. */
pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
for (i = 0; i < 32; i++) {
j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
if (j == j2) continue;
- if ((j != 0) && (j != 0xffff)) break;
+ if ((j != 0) && (j != 0xffff)) {
+ info->active_low = 1;
+ break;
+ }
}
}
static int axnet_resume(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
+ axnet_dev_t *info = PRIV(dev);
if (link->open) {
+ if (info->active_low == 1)
+ pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
+
axnet_reset_8390(dev);
AX88190_init(dev, 1);
netif_device_attach(dev);
netdev->irq = adapter->msix_entries[0].vector;
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
err = register_netdev(netdev);
if (err) {
else
tp->features &= ~RTL_FEATURE_WOL;
__rtl8169_set_wol(tp, wol->wolopts);
- device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
-
spin_unlock_irq(&tp->lock);
+ device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
+
return 0;
}
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
- .intr_event = SYSErr | RxFIFOOver | LinkChg | RxOverflow |
+ .intr_event = SYSErr | LinkChg | RxOverflow |
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_GMII | RTL_FEATURE_MSI,
}
/* Work around for rx fifo overflow */
- if (unlikely(status & RxFIFOOver)) {
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
netif_stop_queue(dev);
rtl8169_tx_timeout(dev);
break;
/* device is off until link detection */
netif_carrier_off(dev);
- netif_stop_queue(dev);
return dev;
}
#define __SMSC911X_H__
#define TX_FIFO_LOW_THRESHOLD ((u32)1600)
-#define SMSC911X_EEPROM_SIZE ((u32)7)
+#define SMSC911X_EEPROM_SIZE ((u32)128)
#define USE_DEBUG 0
/* This is the maximum number of packets to be received every
de->media_timer.data = (unsigned long) de;
netif_carrier_off(dev);
- netif_stop_queue(dev);
/* wake up device, assign resources */
rc = pci_enable_device(pdev);
ugeth_vdbg("%s: IN", __func__);
+ /*
+ * Tell the kernel the link is down.
+ * Must be done before disabling the controller
+ * or deadlock may happen.
+ */
+ phy_stop(phydev);
+
/* Disable the controller */
ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
- /* Tell the kernel the link is down */
- phy_stop(phydev);
-
/* Mask all interrupts */
out_be32(ugeth->uccf->p_uccm, 0x00000000);
/* Disable Rx and Tx */
clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
- phy_disconnect(ugeth->phydev);
- ugeth->phydev = NULL;
-
ucc_geth_memclean(ugeth);
}
napi_disable(&ugeth->napi);
+ cancel_work_sync(&ugeth->timeout_work);
ucc_geth_stop(ugeth);
+ phy_disconnect(ugeth->phydev);
+ ugeth->phydev = NULL;
free_irq(ugeth->ug_info->uf_info.irq, ugeth->ndev);
* Must reset MAC *and* PHY. This is done by reopening
* the device.
*/
- ucc_geth_close(dev);
- ucc_geth_open(dev);
+ netif_tx_stop_all_queues(dev);
+ ucc_geth_stop(ugeth);
+ ucc_geth_init_mac(ugeth);
+ /* Must start PHY here */
+ phy_start(ugeth->phydev);
+ netif_tx_start_all_queues(dev);
}
netif_tx_schedule_all(dev);
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
- netif_carrier_off(dev);
schedule_work(&ugeth->timeout_work);
}
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/pm_runtime.h>
#define DRIVER_VERSION "22-Aug-2005"
struct usb_device *xdev;
int status;
const char *name;
+ struct usb_driver *driver = to_usb_driver(udev->dev.driver);
+
+ /* usbnet already took usb runtime pm, so have to enable the feature
+ * for usb interface, otherwise usb_autopm_get_interface may return
+ * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+ */
+ if (!driver->supports_autosuspend) {
+ driver->supports_autosuspend = 1;
+ pm_runtime_enable(&udev->dev);
+ }
name = udev->dev.driver->name;
info = (struct driver_info *) prod->driver_info;
goto unregister;
}
- vi->status = VIRTIO_NET_S_LINK_UP;
- virtnet_update_status(vi);
- netif_carrier_on(dev);
+ /* Assume link up if device can't report link status,
+ otherwise get link status from config. */
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+ netif_carrier_off(dev);
+ virtnet_update_status(vi);
+ } else {
+ vi->status = VIRTIO_NET_S_LINK_UP;
+ netif_carrier_on(dev);
+ }
pr_debug("virtnet: registered device %s\n", dev->name);
return 0;
val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
}
+ if (AR_SREV_9280(ah))
+ val |= AR_WA_BIT22;
+
if (AR_SREV_9285E_20(ah))
val |= AR_WA_BIT23;
}
extern struct ieee80211_ops ath9k_ops;
+extern struct pm_qos_request_list ath9k_pm_qos_req;
extern int modparam_nohwcrypt;
extern int led_blink;
{ USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */
{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
+ { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
{ },
return;
}
- usb_fill_int_urb(urb, hif_dev->udev,
+ usb_fill_bulk_urb(urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_REG_IN_PIPE),
nskb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, nskb, 1);
+ ath9k_hif_usb_reg_in_cb, nskb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
if (!skb)
goto err;
- usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev,
+ usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_REG_IN_PIPE),
skb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, skb, 1);
+ ath9k_hif_usb_reg_in_cb, skb);
if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0)
goto err;
goto err_fw_req;
}
- /* Alloc URBs */
- ret = ath9k_hif_usb_alloc_urbs(hif_dev);
- if (ret) {
- dev_err(&hif_dev->udev->dev,
- "ath9k_htc: Unable to allocate URBs\n");
- goto err_urb;
- }
-
/* Download firmware */
ret = ath9k_hif_usb_download_fw(hif_dev);
if (ret) {
*/
for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) {
endp = &alt->endpoint[idx].desc;
- if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
- == 0x04) &&
- ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
+ if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT) {
endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK;
endp->bmAttributes |= USB_ENDPOINT_XFER_BULK;
endp->bInterval = 0;
}
}
+ /* Alloc URBs */
+ ret = ath9k_hif_usb_alloc_urbs(hif_dev);
+ if (ret) {
+ dev_err(&hif_dev->udev->dev,
+ "ath9k_htc: Unable to allocate URBs\n");
+ goto err_urb;
+ }
+
return 0;
err_fw_download:
ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
"Failed allocating banks for "
"external radio\n");
+ ath9k_hw_rf_free_ext_banks(ah);
return ecode;
}
REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
break;
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_MONITOR:
REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
break;
+ default:
+ if (ah->is_monitoring)
+ REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+ break;
}
}
switch (ah->opmode) {
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_MONITOR:
REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
break;
default:
+ if (ah->is_monitoring) {
+ REG_WRITE(ah, AR_NEXT_TBTT_TIMER,
+ TU_TO_USEC(next_beacon));
+ REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
+ REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
+ flags |= AR_TBTT_TIMER_EN;
+ break;
+ }
ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
"%s: unsupported opmode: %d\n",
__func__, ah->opmode);
bool sw_mgmt_crypto;
bool is_pciexpress;
+ bool is_monitoring;
bool need_an_top2_fixup;
u16 tx_trig_level;
*/
#include <linux/slab.h>
+#include <linux/pm_qos_params.h>
#include "ath9k.h"
.write = ath9k_iowrite32,
};
+struct pm_qos_request_list ath9k_pm_qos_req;
+
/**************************/
/* Initialization */
/**************************/
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
+ pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
return 0;
error_world:
ath9k_ps_wakeup(sc);
+ pm_qos_remove_request(&ath9k_pm_qos_req);
+
wiphy_rfkill_stop_polling(sc->hw->wiphy);
ath_deinit_leds(sc);
*/
#include <linux/nl80211.h>
+#include <linux/pm_qos_params.h>
#include "ath9k.h"
#include "btcoex.h"
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
+ enum ath9k_power_mode power_mode;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (++sc->ps_usecount != 1)
goto unlock;
+ power_mode = sc->sc_ah->power_mode;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
/*
* useful data. Better clear them now so that they don't mess up
* survey data results.
*/
- spin_lock(&common->cc_lock);
- ath_hw_cycle_counters_update(common);
- memset(&common->cc_survey, 0, sizeof(common->cc_survey));
- spin_unlock(&common->cc_lock);
+ if (power_mode != ATH9K_PM_AWAKE) {
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ spin_unlock(&common->cc_lock);
+ }
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
ah->imask |= ATH9K_INT_CST;
sc->sc_flags &= ~SC_OP_INVALID;
+ sc->sc_ah->is_monitoring = false;
/* Disable BMISS interrupt when we're not associated */
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
ath9k_btcoex_timer_resume(sc);
}
+ pm_qos_update_request(&ath9k_pm_qos_req, 55);
+
mutex_unlock:
mutex_unlock(&sc->mutex);
sc->sc_flags |= SC_OP_INVALID;
+ pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+
mutex_unlock(&sc->mutex);
ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
ath9k_hw_set_interrupts(ah, ah->imask);
if (vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC ||
- vif->type == NL80211_IFTYPE_MONITOR) {
+ vif->type == NL80211_IFTYPE_ADHOC) {
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
if (conf->flags & IEEE80211_CONF_MONITOR) {
ath_print(common, ATH_DBG_CONFIG,
- "HW opmode set to Monitor mode\n");
- sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+ "Monitor mode is enabled\n");
+ sc->sc_ah->is_monitoring = true;
+ } else {
+ ath_print(common, ATH_DBG_CONFIG,
+ "Monitor mode is disabled\n");
+ sc->sc_ah->is_monitoring = false;
}
}
*/
if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
(sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR))
+ (sc->sc_ah->is_monitoring))
rfilt |= ATH9K_RX_FILTER_PROM;
if (sc->rx.rxfilter & FIF_CONTROL)
* decryption and MIC failures. For monitor mode,
* we also ignore the CRC error.
*/
- if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+ if (ah->is_monitoring) {
if (rx_stats->rs_status &
~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
ATH9K_RXERR_CRC))
#define AR_WA_RESET_EN (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */
#define AR_WA_ANALOG_SHIFT (1 << 20)
#define AR_WA_POR_SHORT (1 << 21) /* PCI-E Phy reset control */
+#define AR_WA_BIT22 (1 << 22)
#define AR9285_WA_DEFAULT 0x004a050b
#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
{ USB_DEVICE(0x07d1, 0x3c10) },
/* D-Link DWA 160 A2 */
{ USB_DEVICE(0x07d1, 0x3a09) },
+ /* D-Link DWA 130 D */
+ { USB_DEVICE(0x07d1, 0x3a0f) },
/* Netgear WNA1000 */
{ USB_DEVICE(0x0846, 0x9040) },
- /* Netgear WNDA3100 */
+ /* Netgear WNDA3100 (v1) */
{ USB_DEVICE(0x0846, 0x9010) },
/* Netgear WN111 v2 */
{ USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
#define DRV_DESCRIPTION "802.11 data/management/control stack"
#define DRV_NAME "libipw"
+#define DRV_PROCNAME "ieee80211"
#define DRV_VERSION LIBIPW_VERSION
#define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
struct proc_dir_entry *e;
libipw_debug_level = debug;
- libipw_proc = proc_mkdir("ieee80211", init_net.proc_net);
+ libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net);
if (libipw_proc == NULL) {
- LIBIPW_ERROR("Unable to create " DRV_NAME
+ LIBIPW_ERROR("Unable to create " DRV_PROCNAME
" proc directory\n");
return -EIO;
}
e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc,
&debug_level_proc_fops);
if (!e) {
- remove_proc_entry(DRV_NAME, init_net.proc_net);
+ remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
libipw_proc = NULL;
return -EIO;
}
#ifdef CONFIG_LIBIPW_DEBUG
if (libipw_proc) {
remove_proc_entry("debug_level", libipw_proc);
- remove_proc_entry(DRV_NAME, init_net.proc_net);
+ remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
libipw_proc = NULL;
}
#endif /* CONFIG_LIBIPW_DEBUG */
* "the hard way", rather than using device's scan.
*/
if (iwl3945_mod_params.disable_hw_scan) {
- IWL_ERR(priv, "sw scan support is deprecated\n");
+ dev_printk(KERN_DEBUG, &(pdev->dev),
+ "sw scan support is deprecated\n");
iwl3945_hw_ops.hw_scan = NULL;
}
if (priv->scan_channel < priv->scan_req->n_channels) {
cancel_delayed_work(&priv->scan_work);
- queue_delayed_work(priv->work_thread, &priv->scan_work,
- msecs_to_jiffies(300));
+ if (!priv->stopping)
+ queue_delayed_work(priv->work_thread, &priv->scan_work,
+ msecs_to_jiffies(300));
}
/* This is the final data we are about to send */
/* CFG80211 */
struct wireless_dev *wdev;
bool wiphy_registered;
+ bool stopping;
struct cfg80211_scan_request *scan_req;
u8 assoc_bss[ETH_ALEN];
u8 disassoc_reason;
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
+ priv->stopping = false;
if (priv->connect_status == LBS_CONNECTED)
netif_carrier_on(dev);
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
+ priv->stopping = true;
netif_stop_queue(dev);
spin_unlock_irq(&priv->driver_lock);
schedule_work(&priv->mcast_work);
+ cancel_delayed_work_sync(&priv->scan_work);
+ if (priv->scan_req) {
+ cfg80211_scan_done(priv->scan_req, false);
+ priv->scan_req = NULL;
+ }
lbs_deb_leave(LBS_DEB_NET);
return 0;
boolean
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
-comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
- depends on RT2X00_LIB=y && LEDS_CLASS=m
-
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
}
}
+static bool pci_bus_resource_better(struct resource *res1, bool pos1,
+ struct resource *res2, bool pos2)
+{
+ /* If exactly one is positive decode, always prefer that one */
+ if (pos1 != pos2)
+ return pos1 ? true : false;
+
+ /* Prefer the one that contains the highest address */
+ if (res1->end != res2->end)
+ return (res1->end > res2->end) ? true : false;
+
+ /* Otherwise, prefer the one with highest "center of gravity" */
+ if (res1->start != res2->start)
+ return (res1->start > res2->start) ? true : false;
+
+ /* Otherwise, choose one arbitrarily (but consistently) */
+ return (res1 > res2) ? true : false;
+}
+
+static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
+{
+ struct pci_bus_resource *bus_res;
+
+ /*
+ * This relies on the fact that pci_bus.resource[] refers to P2P or
+ * CardBus bridge base/limit registers, which are always positively
+ * decoded. The pci_bus.resources list contains host bridge or
+ * subtractively decoded resources.
+ */
+ list_for_each_entry(bus_res, &bus->resources, list) {
+ if (bus_res->res == res)
+ return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
+ false : true;
+ }
+ return true;
+}
+
/*
- * Find the highest-address bus resource below the cursor "res". If the
- * cursor is NULL, return the highest resource.
+ * Find the next-best bus resource after the cursor "res". If the cursor is
+ * NULL, return the best resource. "Best" means that we prefer positive
+ * decode regions over subtractive decode, then those at higher addresses.
*/
static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
unsigned int type,
struct resource *res)
{
+ bool res_pos, r_pos, prev_pos = false;
struct resource *r, *prev = NULL;
int i;
+ res_pos = pci_bus_resource_positive(bus, res);
pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
if ((r->flags & IORESOURCE_TYPE_BITS) != type)
continue;
- /* If this resource is at or past the cursor, skip it */
- if (res) {
- if (r == res)
- continue;
- if (r->end > res->end)
- continue;
- if (r->end == res->end && r->start > res->start)
- continue;
+ r_pos = pci_bus_resource_positive(bus, r);
+ if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
+ if (!prev || pci_bus_resource_better(r, r_pos,
+ prev, prev_pos)) {
+ prev = r;
+ prev_pos = r_pos;
+ }
}
-
- if (!prev)
- prev = r;
-
- /*
- * A small resource is higher than a large one that ends at
- * the same address.
- */
- if (r->end > prev->end ||
- (r->end == prev->end && r->start > prev->start))
- prev = r;
}
return prev;
for (;;) {
offset = next_offset;
+
+ /* Make sure what we read is still in the mapped section */
+ if (WARN(offset > (ebda_sz * 1024 - 4),
+ "ibmphp_ebda: next read is beyond ebda_sz\n"))
+ break;
+
next_offset = readw (io_mem + offset); /* offset of next blk */
offset += 2;
#ifdef HAVE_PCI_MMAP
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+ enum pci_mmap_api mmap_api)
{
- unsigned long nr, start, size;
+ unsigned long nr, start, size, pci_start;
+ if (pci_resource_len(pdev, resno) == 0)
+ return 0;
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
- if (start < size && size - start >= nr)
+ pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+ pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+ if (start >= pci_start && start < pci_start + size &&
+ start + nr <= pci_start + size)
return 1;
- WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
- current->comm, start, start+nr, pci_name(pdev), resno, size);
return 0;
}
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
- if (!pci_mmap_fits(pdev, i, vma))
+ if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+ WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+ "at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+ current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+ pci_name(pdev), i,
+ (u64)pci_resource_start(pdev, i),
+ (u64)pci_resource_len(pdev, i));
return -EINVAL;
+ }
/* pci_mmap_page_range() expects the same kind of entry as coming
* from /proc/bus/pci/ which is a "user visible" value. If this is
int err;
int i, bars = 0;
+ /*
+ * Power state could be unknown at this point, either due to a fresh
+ * boot or a device removal call. So get the current power state
+ * so that things like MSI message writing will behave as expected
+ * (e.g. if the device really is in D0 at enable time).
+ */
+ if (dev->pm_cap) {
+ u16 pmcsr;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ }
+
if (atomic_add_return(1, &dev->enable_cnt) > 1)
return 0; /* already enabled */
#endif
extern void pci_cleanup_rom(struct pci_dev *dev);
#ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+ PCI_MMAP_SYSFS, /* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+ PCI_MMAP_PROCFS /* mmap on /proc/bus/pci/<BDF> */
+};
extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
- struct vm_area_struct *vma);
+ struct vm_area_struct *vmai,
+ enum pci_mmap_api mmap_api);
#endif
int pci_probe_reset_function(struct pci_dev *dev);
/* Make sure the caller is mapping a real resource for this device */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- if (pci_mmap_fits(dev, i, vma))
+ if (pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS))
break;
}
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/msi.h>
-#include <xen/xenbus.h>
#include <xen/interface/io/pciif.h>
#include <asm/xen/pci.h>
#include <linux/interrupt.h>
pcidev = pci_get_bus_and_slot(bus, devfn);
if (!pcidev || !pcidev->driver) {
- dev_err(&pcidev->dev,
- "device or driver is NULL\n");
+ dev_err(&pdev->xdev->dev, "device or AER driver is NULL\n");
+ if (pcidev)
+ pci_dev_put(pcidev);
return result;
}
pdrv = pcidev->driver;
return 0;
- err_out_free_res2:
+err_out_free_res2:
if (irq_mode == 1)
free_irq(dev->irq, socket);
else
del_timer_sync(&socket->poll_timer);
- err_out_free_res:
+err_out_free_res:
pci_release_regions(dev);
- err_out_disable:
+err_out_disable:
pci_disable_device(dev);
- err_out_free_mem:
+err_out_free_mem:
kfree(socket);
return ret;
}
struct pd6729_socket {
int number;
int card_irq;
- unsigned long io_base; /* base io address of the socket */
+ unsigned long io_base; /* base io address of the socket */
struct pcmcia_socket socket;
struct timer_list poll_timer;
};
#ifdef CONFIG_SA1100_COLLIE
#include "sa11xx_base.h"
-int __init pcmcia_collie_init(struct device *dev)
+int __devinit pcmcia_collie_init(struct device *dev)
{
int ret = -ENODEV;
.socket_suspend = assabet_pcmcia_socket_suspend,
};
-int pcmcia_assabet_init(struct device *dev)
+int __devinit pcmcia_assabet_init(struct device *dev)
{
int ret = -ENODEV;
.socket_suspend = cerf_pcmcia_socket_suspend,
};
-int __init pcmcia_cerf_init(struct device *dev)
+int __devinit pcmcia_cerf_init(struct device *dev)
{
int ret = -ENODEV;
#endif
};
-static int sa11x0_drv_pcmcia_probe(struct platform_device *dev)
+static int __devinit sa11x0_drv_pcmcia_probe(struct platform_device *dev)
{
int i, ret = -ENODEV;
.socket_suspend = h3600_pcmcia_socket_suspend,
};
-int __init pcmcia_h3600_init(struct device *dev)
+int __devinit pcmcia_h3600_init(struct device *dev)
{
int ret = -ENODEV;
.socket_suspend = shannon_pcmcia_socket_suspend,
};
-int __init pcmcia_shannon_init(struct device *dev)
+int __devinit pcmcia_shannon_init(struct device *dev)
{
int ret = -ENODEV;
.socket_suspend = simpad_pcmcia_socket_suspend,
};
-int __init pcmcia_simpad_init(struct device *dev)
+int __devinit pcmcia_simpad_init(struct device *dev)
{
int ret = -ENODEV;
void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
int lvl, const char *fmt, ...)
{
+ struct va_format vaf;
va_list args;
if (pc_debug > lvl) {
- printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func);
va_start(args, fmt);
- vprintk(fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf);
+
va_end(args);
}
}
list_for_each_entry(port, &rio_mports, node) {
if (!request_mem_region(port->iores.start,
- port->iores.end - port->iores.start,
+ resource_size(&port->iores),
port->name)) {
printk(KERN_ERR
"RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
- (u64)port->iores.start, (u64)port->iores.end - 1);
+ (u64)port->iores.start, (u64)port->iores.end);
rc = -ENOMEM;
goto out;
}
#ifdef CONFIG_SH_SECUREEDGE5410
#include <asm/rtc.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
#define RTC_RESET 0x1000
#define RTC_IODATA 0x0800
clk_put(rtc->clk);
iounmap(rtc->regbase);
err_badmap:
- release_resource(rtc->res);
+ release_mem_region(rtc->res->start, rtc->regsize);
err_badres:
kfree(rtc);
}
iounmap(rtc->regbase);
- release_resource(rtc->res);
+ release_mem_region(rtc->res->start, rtc->regsize);
clk_disable(rtc->clk);
clk_put(rtc->clk);
* index of buffer to be filled by driver; state EMPTY or PACKING
*/
int next_buf_to_fill;
- int sync_iqdio_error;
/*
* number of buffers that are currently filled (PRIMED)
* -> these buffers are hardware-owned
int is_vmac;
};
-struct qeth_skb_data {
- __u32 magic;
- int count;
-};
-
-#define QETH_SKB_MAGIC 0x71657468
-#define QETH_SIGA_CC2_RETRIES 3
-
struct qeth_rx {
int b_count;
int b_index;
return;
}
-static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buf, unsigned int qeth_skip_skb)
+static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
+ struct qeth_qdio_out_buffer *buf)
{
int i;
struct sk_buff *skb;
if (buf->buffer->element[0].flags & 0x40)
atomic_dec(&queue->set_pci_flags_count);
- if (!qeth_skip_skb) {
+ skb = skb_dequeue(&buf->skb_list);
+ while (skb) {
+ atomic_dec(&skb->users);
+ dev_kfree_skb_any(skb);
skb = skb_dequeue(&buf->skb_list);
- while (skb) {
- atomic_dec(&skb->users);
- dev_kfree_skb_any(skb);
- skb = skb_dequeue(&buf->skb_list);
- }
}
for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
if (buf->buffer->element[i].addr && buf->is_header[i])
atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
}
-static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buf)
-{
- __qeth_clear_output_buffer(queue, buf, 0);
-}
-
void qeth_clear_qdio_buffers(struct qeth_card *card)
{
int i, j;
}
}
- queue->sync_iqdio_error = 0;
queue->card->dev->trans_start = jiffies;
if (queue->card->options.performance_stats) {
queue->card->perf_stats.outbound_do_qdio_cnt++;
queue->card->perf_stats.outbound_do_qdio_time +=
qeth_get_micros() -
queue->card->perf_stats.outbound_do_qdio_start_time;
- if (rc > 0) {
- if (!(rc & QDIO_ERROR_SIGA_BUSY))
- queue->sync_iqdio_error = rc & 3;
- }
if (rc) {
queue->card->stats.tx_errors += count;
/* ignore temporary SIGA errors without busy condition */
{
struct qeth_card *card = (struct qeth_card *)card_ptr;
- if (card->dev)
+ if (card->dev && (card->dev->flags & IFF_UP))
napi_schedule(&card->napi);
}
EXPORT_SYMBOL_GPL(qeth_qdio_start_poll);
struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue];
struct qeth_qdio_out_buffer *buffer;
int i;
- unsigned qeth_send_err;
QETH_CARD_TEXT(card, 6, "qdouhdl");
if (qdio_error & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) {
}
for (i = first_element; i < (first_element + count); ++i) {
buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
- qeth_send_err = qeth_handle_send_error(card, buffer, qdio_error);
- __qeth_clear_output_buffer(queue, buffer,
- (qeth_send_err == QETH_SEND_ERROR_RETRY) ? 1 : 0);
+ qeth_handle_send_error(card, buffer, qdio_error);
+ qeth_clear_output_buffer(queue, buffer);
}
atomic_sub(count, &queue->used_buffers);
/* check if we need to do something on this outbound queue */
int offset, int hd_len)
{
struct qeth_qdio_out_buffer *buffer;
- struct sk_buff *skb1;
- struct qeth_skb_data *retry_ctrl;
int index;
- int rc;
/* spin until we get the queue ... */
while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED,
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
qeth_flush_buffers(queue, index, 1);
- if (queue->sync_iqdio_error == 2) {
- skb1 = skb_dequeue(&buffer->skb_list);
- while (skb1) {
- atomic_dec(&skb1->users);
- skb1 = skb_dequeue(&buffer->skb_list);
- }
- retry_ctrl = (struct qeth_skb_data *) &skb->cb[16];
- if (retry_ctrl->magic != QETH_SKB_MAGIC) {
- retry_ctrl->magic = QETH_SKB_MAGIC;
- retry_ctrl->count = 0;
- }
- if (retry_ctrl->count < QETH_SIGA_CC2_RETRIES) {
- retry_ctrl->count++;
- rc = dev_queue_xmit(skb);
- } else {
- dev_kfree_skb_any(skb);
- QETH_CARD_TEXT(card, 2, "qrdrop");
- }
- }
return 0;
out:
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
"changed. The Linux SCSI layer does not "
"automatically adjust these parameters.\n");
- if (scmd->request->cmd_flags & REQ_HARDBARRIER)
- /*
- * barrier requests should always retry on UA
- * otherwise block will get a spurious error
- */
- return NEEDS_RETRY;
- else
- /*
- * for normal (non barrier) commands, pass the
- * UA upwards for a determination in the
- * completion functions
- */
- return SUCCESS;
+ /*
+ * Pass the UA upwards for a determination in the completion
+ * functions.
+ */
+ return SUCCESS;
/* these three are not supported */
case COPY_ABORTED:
static const struct pci_device_id softmodem_blacklist[] = {
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+ { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+ { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
};
/*
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
0, 0,
pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, 0x9505,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
/*
* The below card is a little controversial since it is the
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
#include <asm/gpio.h>
#include <mach/bfin_serial_5xx.h>
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
-#endif
#ifdef CONFIG_SERIAL_BFIN_MODULE
# undef CONFIG_EARLY_PRINTK
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx++;
- SSYNC();
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
# ifdef CONFIG_BF54x
{
+ /*
+ * UART2 and UART3 on BF548 share interrupt PINs and DMA
+ * controllers with SPORT2 and SPORT3. UART rx and tx
+ * interrupts are generated in PIO mode only when configure
+ * their peripheral mapping registers properly, which means
+ * request corresponding DMA channels in PIO mode as well.
+ */
unsigned uart_dma_ch_rx, uart_dma_ch_tx;
switch (uart->port.irq) {
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
- pr_info("Unable to attach BlackFin UART CTS interrupt.\
- So, disable it.\n");
+ pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
if (uart->rts_pin >= 0) {
if (request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
- pr_info("Unable to attach BlackFin UART Modem \
- Status interrupt.\n");
+ pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
/* CTS RTS PINs are negative assertive. */
if (termios->c_cflag & CMSPAR)
lcr |= STP;
+ spin_lock_irqsave(&uart->port.lock, flags);
+
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (FE | PE);
if (termios->c_line != N_IRDA)
quot -= ANOMALY_05000230;
- spin_lock_irqsave(&uart->port.lock, flags);
-
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
/* Disable UART */
struct bfin_serial_port *uart;
struct ktermios t;
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ /*
+ * If we are using early serial, don't let the normal console rewind
+ * log buffer, since that causes things to be printed multiple times
+ */
+ bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/vt_kern.h>
+#include <linux/input.h>
#define MAX_CONFIG_LEN 40
static int kgdb_tty_line;
#ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_reset_connect(struct input_handler *handler,
+ struct input_dev *dev,
+ const struct input_device_id *id)
+{
+ input_reset_device(dev);
+
+ /* Retrun an error - we do not want to bind, just to reset */
+ return -ENODEV;
+}
+
+static void kgdboc_reset_disconnect(struct input_handle *handle)
+{
+ /* We do not expect anyone to actually bind to us */
+ BUG();
+}
+
+static const struct input_device_id kgdboc_reset_ids[] = {
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ },
+ { }
+};
+
+static struct input_handler kgdboc_reset_handler = {
+ .connect = kgdboc_reset_connect,
+ .disconnect = kgdboc_reset_disconnect,
+ .name = "kgdboc_reset",
+ .id_table = kgdboc_reset_ids,
+};
+
+static DEFINE_MUTEX(kgdboc_reset_mutex);
+
+static void kgdboc_restore_input_helper(struct work_struct *dummy)
+{
+ /*
+ * We need to take a mutex to prevent several instances of
+ * this work running on different CPUs so they don't try
+ * to register again already registered handler.
+ */
+ mutex_lock(&kgdboc_reset_mutex);
+
+ if (input_register_handler(&kgdboc_reset_handler) == 0)
+ input_unregister_handler(&kgdboc_reset_handler);
+
+ mutex_unlock(&kgdboc_reset_mutex);
+}
+
+static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper);
+
+static void kgdboc_restore_input(void)
+{
+ schedule_work(&kgdboc_restore_input_work);
+}
+
static int kgdboc_register_kbd(char **cptr)
{
if (strncmp(*cptr, "kbd", 3) == 0) {
i--;
}
}
+ flush_work_sync(&kgdboc_restore_input_work);
}
#else /* ! CONFIG_KDB_KEYBOARD */
#define kgdboc_register_kbd(x) 0
#define kgdboc_unregister_kbd()
+#define kgdboc_restore_input()
#endif /* ! CONFIG_KDB_KEYBOARD */
static int kgdboc_option_setup(char *opt)
dbg_restore_graphics = 0;
con_debug_leave();
}
+ kgdboc_restore_input();
}
static struct kgdb_io kgdboc_io_ops = {
static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
{
unsigned long rate_error, rate_error_prev = ~0UL;
- unsigned long rate_best_fit = rounder->rate;
unsigned long highest, lowest, freq;
+ long rate_best_fit = -ENOENT;
int i;
highest = 0;
};
if (clk->nr_freqs < 1)
- return 0;
+ return -ENOSYS;
return clk_rate_round_helper(&table_round);
}
}
EXPORT_SYMBOL_GPL(clk_round_rate);
+long clk_round_parent(struct clk *clk, unsigned long target,
+ unsigned long *best_freq, unsigned long *parent_freq,
+ unsigned int div_min, unsigned int div_max)
+{
+ struct cpufreq_frequency_table *freq, *best = NULL;
+ unsigned long error = ULONG_MAX, freq_high, freq_low, div;
+ struct clk *parent = clk_get_parent(clk);
+
+ if (!parent) {
+ *parent_freq = 0;
+ *best_freq = clk_round_rate(clk, target);
+ return abs(target - *best_freq);
+ }
+
+ for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END;
+ freq++) {
+ if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ if (unlikely(freq->frequency / target <= div_min - 1)) {
+ unsigned long freq_max;
+
+ freq_max = (freq->frequency + div_min / 2) / div_min;
+ if (error > target - freq_max) {
+ error = target - freq_max;
+ best = freq;
+ if (best_freq)
+ *best_freq = freq_max;
+ }
+
+ pr_debug("too low freq %u, error %lu\n", freq->frequency,
+ target - freq_max);
+
+ if (!error)
+ break;
+
+ continue;
+ }
+
+ if (unlikely(freq->frequency / target >= div_max)) {
+ unsigned long freq_min;
+
+ freq_min = (freq->frequency + div_max / 2) / div_max;
+ if (error > freq_min - target) {
+ error = freq_min - target;
+ best = freq;
+ if (best_freq)
+ *best_freq = freq_min;
+ }
+
+ pr_debug("too high freq %u, error %lu\n", freq->frequency,
+ freq_min - target);
+
+ if (!error)
+ break;
+
+ continue;
+ }
+
+ div = freq->frequency / target;
+ freq_high = freq->frequency / div;
+ freq_low = freq->frequency / (div + 1);
+
+ if (freq_high - target < error) {
+ error = freq_high - target;
+ best = freq;
+ if (best_freq)
+ *best_freq = freq_high;
+ }
+
+ if (target - freq_low < error) {
+ error = target - freq_low;
+ best = freq;
+ if (best_freq)
+ *best_freq = freq_low;
+ }
+
+ pr_debug("%u / %lu = %lu, / %lu = %lu, best %lu, parent %u\n",
+ freq->frequency, div, freq_high, div + 1, freq_low,
+ *best_freq, best->frequency);
+
+ if (!error)
+ break;
+ }
+
+ if (parent_freq)
+ *parent_freq = best->frequency;
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(clk_round_parent);
+
#ifdef CONFIG_PM
static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
{
* Register the IRQ position with the global IRQ map, then insert
* it in to the radix tree.
*/
- irq_reserve_irqs(irq, 1);
+ irq_reserve_irq(irq);
raw_spin_lock_irqsave(&intc_big_lock, flags);
radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
int i;
for (i = 0; i < nr_vecs; i++)
- irq_reserve_irqs(evt2irq(vectors[i].vect), 1);
+ irq_reserve_irq(evt2irq(vectors[i].vect));
}
entry = radix_tree_deref_slot((void **)entries[i]);
if (unlikely(!entry))
continue;
- if (unlikely(entry == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(entry))
goto restart;
irq = create_irq();
config ATH6KL_CFG80211
bool "CFG80211 support"
- depends on ATH6K_LEGACY
+ depends on ATH6K_LEGACY && CFG80211
help
Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space.
do {
/* check if host supports scatter requests and it meets our requirements */
- if (device->func->card->host->max_hw_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
+ if (device->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HIF-SCATTER : host only supports scatter of : %d entries, need: %d \n",
- device->func->card->host->max_hw_segs, MAX_SCATTER_ENTRIES_PER_REQ));
+ device->func->card->host->max_segs, MAX_SCATTER_ENTRIES_PER_REQ));
status = A_ENOTSUP;
break;
}
if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
A_UINT32 param;
- status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(((A_UINT32)fw_entry->data) + board_data_size), board_ext_data_size);
+ status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size);
if (status != A_OK) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
A_UINT8 csumDest=0;
A_UINT8 csum=skb->ip_summed;
if(csumOffload && (csum==CHECKSUM_PARTIAL)){
- csumStart=skb->csum_start-(skb->network_header-skb->head)+sizeof(ATH_LLC_SNAP_HDR);
+ csumStart = (skb->head + skb->csum_start - skb_network_header(skb) +
+ sizeof(ATH_LLC_SNAP_HDR));
csumDest=skb->csum_offset+csumStart;
}
#endif
static int
ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- A_UINT8 key_index, const A_UINT8 *mac_addr,
+ A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
struct key_params *params)
{
AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
static int
ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- A_UINT8 key_index, const A_UINT8 *mac_addr)
+ A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr)
{
AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
static int
ar6k_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
- A_UINT8 key_index, const A_UINT8 *mac_addr, void *cookie,
+ A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
+ void *cookie,
void (*callback)(void *cookie, struct key_params*))
{
AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
batman_if->net_dev->dev_addr, ETH_ALEN);
}
-static void check_known_mac_addr(uint8_t *addr)
+static void check_known_mac_addr(struct net_device *net_dev)
{
struct batman_if *batman_if;
(batman_if->if_status != IF_TO_BE_ACTIVATED))
continue;
- if (!compare_orig(batman_if->net_dev->dev_addr, addr))
+ if (batman_if->net_dev == net_dev)
+ continue;
+
+ if (!compare_orig(batman_if->net_dev->dev_addr,
+ net_dev->dev_addr))
continue;
pr_warning("The newly added mac address (%pM) already exists "
- "on: %s\n", addr, batman_if->net_dev->name);
+ "on: %s\n", net_dev->dev_addr,
+ batman_if->net_dev->name);
pr_warning("It is strongly recommended to keep mac addresses "
"unique to avoid problems!\n");
}
atomic_set(&batman_if->refcnt, 0);
hardif_hold(batman_if);
- check_known_mac_addr(batman_if->net_dev->dev_addr);
+ check_known_mac_addr(batman_if->net_dev);
spin_lock(&if_list_lock);
list_add_tail_rcu(&batman_if->list, &if_list);
goto out;
}
- check_known_mac_addr(batman_if->net_dev->dev_addr);
+ check_known_mac_addr(batman_if->net_dev);
update_mac_addresses(batman_if);
bat_priv = netdev_priv(batman_if->soft_iface);
/* find a suitable router for this originator, and use
* bonding if possible. */
-struct neigh_node *find_router(struct orig_node *orig_node,
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+ struct orig_node *orig_node,
struct batman_if *recv_if)
{
- struct bat_priv *bat_priv;
struct orig_node *primary_orig_node;
struct orig_node *router_orig;
struct neigh_node *router, *first_candidate, *best_router;
/* without bonding, the first node should
* always choose the default router. */
- if (!recv_if)
- return orig_node->router;
-
- bat_priv = netdev_priv(recv_if->soft_iface);
bonding_enabled = atomic_read(&bat_priv->bonding_enabled);
- if (!bonding_enabled)
+ if ((!recv_if) && (!bonding_enabled))
return orig_node->router;
router_orig = orig_node->router->orig_node;
orig_node = ((struct orig_node *)
hash_find(bat_priv->orig_hash, unicast_packet->dest));
- router = find_router(orig_node, recv_if);
+ router = find_router(bat_priv, orig_node, recv_if);
if (!router) {
spin_unlock_irqrestore(&bat_priv->orig_hash_lock, flags);
int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if);
int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if);
int recv_bat_packet(struct sk_buff *skb, struct batman_if *recv_if);
-struct neigh_node *find_router(struct orig_node *orig_node,
- struct batman_if *recv_if);
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+ struct orig_node *orig_node, struct batman_if *recv_if);
void update_bonding_candidates(struct bat_priv *bat_priv,
struct orig_node *orig_node);
if (!orig_node)
orig_node = transtable_search(bat_priv, ethhdr->h_dest);
- router = find_router(orig_node, NULL);
+ router = find_router(bat_priv, orig_node, NULL);
if (!router)
goto unlock;
}
#endif
case IOCTL_BE_BUCKET_SIZE:
- Adapter->BEBucketSize = *(PULONG)arg;
- Status = STATUS_SUCCESS;
+ Status = 0;
+ if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
break;
case IOCTL_RTPS_BUCKET_SIZE:
- Adapter->rtPSBucketSize = *(PULONG)arg;
- Status = STATUS_SUCCESS;
+ Status = 0;
+ if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
break;
case IOCTL_CHIP_RESET:
{
case IOCTL_QOS_THRESHOLD:
{
USHORT uiLoopIndex;
- for(uiLoopIndex = 0 ; uiLoopIndex < NO_OF_QUEUES ; uiLoopIndex++)
- {
- Adapter->PackInfo[uiLoopIndex].uiThreshold = *(PULONG)arg;
+
+ Status = 0;
+ for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
+ if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
+ (unsigned long __user *)arg)) {
+ Status = -EFAULT;
+ break;
+ }
}
- Status = STATUS_SUCCESS;
break;
}
}
case IOCTL_BCM_GET_CURRENT_STATUS:
{
- LINK_STATE *plink_state = NULL;
+ LINK_STATE plink_state;
+
/* Copy Ioctl Buffer structure */
if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
{
Status = -EFAULT;
break;
}
- plink_state = (LINK_STATE*)arg;
- plink_state->bIdleMode = (UCHAR)Adapter->IdleMode;
- plink_state->bShutdownMode = Adapter->bShutStatus;
- plink_state->ucLinkStatus = (UCHAR)Adapter->LinkStatus;
- if(copy_to_user(IoBuffer.OutputBuffer,
- (PUCHAR)plink_state, (UINT)IoBuffer.OutputLength))
- {
+ if (IoBuffer.OutputLength != sizeof(plink_state)) {
+ Status = -EINVAL;
+ break;
+ }
+
+ if (copy_from_user(&plink_state, (void __user *)arg, sizeof(plink_state))) {
+ Status = -EFAULT;
+ break;
+ }
+ plink_state.bIdleMode = (UCHAR)Adapter->IdleMode;
+ plink_state.bShutdownMode = Adapter->bShutStatus;
+ plink_state.ucLinkStatus = (UCHAR)Adapter->LinkStatus;
+ if (copy_to_user(IoBuffer.OutputBuffer, &plink_state, IoBuffer.OutputLength)) {
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
Status = -EFAULT;
break;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy From User space failed. status :%d", Status);
return -EFAULT;
}
- uiSectorSize = *((PUINT)(IoBuffer.InputBuffer)); /* FIXME: unchecked __user access */
+ if (get_user(uiSectorSize, (unsigned int __user *)IoBuffer.InputBuffer))
+ return -EFAULT;
+
if((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE))
{
=============
Brett Rudley brudley@broadcom.com
Henry Ptasinski henryp@broadcom.com
-Nohee Ko noheek@broadcom.com
+Dowan Kim dowan@broadcom.com
=====
Brett Rudley <brudley@broadcom.com>
Henry Ptasinski <henryp@broadcom.com>
-Nohee Ko <noheek@broadcom.com>
+Dowan Kim <dowan@broadcom.com>
ASSERT(net);
ASSERT(!net->netdev_ops);
- net->netdev_ops = &dhd_ops_virt;
-
net->netdev_ops = &dhd_ops_pri;
/*
struct net_device *dev,
u8 key_idx);
static s32 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr,
+ u8 key_idx, bool pairwise, const u8 *mac_addr,
struct key_params *params);
static s32 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr);
+ u8 key_idx, bool pairwise, const u8 *mac_addr);
static s32 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr,
+ u8 key_idx, bool pairwise, const u8 *mac_addr,
void *cookie, void (*callback) (void *cookie,
struct
key_params *
static s32
wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr,
+ u8 key_idx, bool pairwise, const u8 *mac_addr,
struct key_params *params)
{
struct wl_wsec_key key;
static s32
wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr)
+ u8 key_idx, bool pairwise, const u8 *mac_addr)
{
struct wl_wsec_key key;
s32 err = 0;
static s32
wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, const u8 *mac_addr, void *cookie,
+ u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie,
void (*callback) (void *cookie, struct key_params * params))
{
struct key_params params;
goto oops;
}
- err = -EINTR;
- if(signal_pending(current))
- goto oops;
-
/* Set ownership of /proc/cpia/videoX to current user */
if(cam->proc_entry)
- cam->proc_entry->uid = current_uid();
+ cam->proc_entry->uid = current_euid();
/* set mark for loading first frame uncompressed */
cam->first_frame = 1;
pid = kernel_thread (exec_mknod, (void *)info, 0);
// initialize application information
- info->appcnt = 0;
// if (ft1000_flarion_cnt == 0) {
//
DPRINT_DBG(VMBUS, "heartbeat packet: len=%d, requestid=%lld",
recvlen, requestid);
- icmsghdrp = (struct icmsg_hdr *)&buf[
- sizeof(struct vmbuspipe_hdr)];
-
icmsghdrp = (struct icmsg_hdr *)&buf[
sizeof(struct vmbuspipe_hdr)];
int retval, i;
struct stream_info *stream;
struct snd_sst_mmap_buff_entry *buf_entry;
+ struct snd_sst_mmap_buff_entry *tmp_buf;
pr_debug("sst:called for str_id %d\n", str_id);
retval = sst_validate_strid(str_id);
if (retval)
return -EINVAL;
- BUG_ON(!mmap_buf);
stream = &sst_drv_ctx->streams[str_id];
if (stream->mmapped != true)
stream->curr_bytes = 0;
stream->cumm_bytes = 0;
+ tmp_buf = kcalloc(mmap_buf->entries, sizeof(*tmp_buf), GFP_KERNEL);
+ if (!tmp_buf)
+ return -ENOMEM;
+ if (copy_from_user(tmp_buf, (void __user *)mmap_buf->buff,
+ mmap_buf->entries * sizeof(*tmp_buf))) {
+ retval = -EFAULT;
+ goto out_free;
+ }
+
pr_debug("sst:new buffers count %d status %d\n",
mmap_buf->entries, stream->status);
- buf_entry = mmap_buf->buff;
+ buf_entry = tmp_buf;
for (i = 0; i < mmap_buf->entries; i++) {
- BUG_ON(!buf_entry);
bufs = kzalloc(sizeof(*bufs), GFP_KERNEL);
- if (!bufs)
- return -ENOMEM;
+ if (!bufs) {
+ retval = -ENOMEM;
+ goto out_free;
+ }
bufs->size = buf_entry->size;
bufs->offset = buf_entry->offset;
bufs->addr = sst_drv_ctx->mmap_mem;
if (sst_play_frame(str_id) < 0) {
pr_warn("sst: play frames fail\n");
mutex_unlock(&stream->lock);
- return -EIO;
+ retval = -EIO;
+ goto out_free;
}
} else if (stream->ops == STREAM_OPS_CAPTURE) {
if (sst_capture_frame(str_id) < 0) {
pr_warn("sst: capture frame fail\n");
mutex_unlock(&stream->lock);
- return -EIO;
+ retval = -EIO;
+ goto out_free;
}
}
}
if (retval >= 0)
retval = stream->cumm_bytes;
pr_debug("sst:end of play/rec ioctl bytes = %d!!\n", retval);
+
+out_free:
+ kfree(tmp_buf);
return retval;
}
{
struct sst_stream_bufs *stream_bufs;
unsigned long index, mmap_len;
- unsigned char *bufp;
+ unsigned char __user *bufp;
unsigned long size, copied_size;
int retval = 0, add_to_list = 0;
static int sent_offset;
/* copy to user */
list_for_each_entry_safe(entry, _entry,
copy_to_list, node) {
- if (copy_to_user((void *)
- iovec[entry->iov_index].iov_base +
- entry->iov_offset,
+ if (copy_to_user(iovec[entry->iov_index].iov_base + entry->iov_offset,
kbufs->addr + entry->offset,
entry->size)) {
/* Clean up the list and return error */
buf, (int) count, (int) stream->status);
stream->buf_type = SST_BUF_USER_STATIC;
- iovec.iov_base = (void *)buf;
+ iovec.iov_base = buf;
iovec.iov_len = count;
nr_segs = 1;
break;
case _IOC_NR(SNDRV_SST_STREAM_SET_PARAMS): {
- struct snd_sst_params *str_param = (struct snd_sst_params *)arg;
+ struct snd_sst_params str_param;
pr_debug("sst: IOCTL_SET_PARAMS recieved!\n");
if (minor != STREAM_MODULE) {
break;
}
+ if (copy_from_user(&str_param, (void __user *)arg,
+ sizeof(str_param))) {
+ retval = -EFAULT;
+ break;
+ }
+
if (!str_id) {
- retval = sst_get_stream(str_param);
+ retval = sst_get_stream(&str_param);
if (retval > 0) {
struct stream_info *str_info;
+ char __user *dest;
+
sst_drv_ctx->stream_cnt++;
data->str_id = retval;
str_info = &sst_drv_ctx->streams[retval];
str_info->src = SST_DRV;
- retval = copy_to_user(&str_param->stream_id,
- &retval, sizeof(__u32));
+ dest = (char __user *)arg + offsetof(struct snd_sst_params, stream_id);
+ retval = copy_to_user(dest, &retval, sizeof(__u32));
if (retval)
retval = -EFAULT;
} else {
} else {
pr_debug("sst: SET_STREAM_PARAMS recieved!\n");
/* allocated set params only */
- retval = sst_set_stream_param(str_id, str_param);
+ retval = sst_set_stream_param(str_id, &str_param);
/* Block the call for reply */
if (!retval) {
int sfreq = 0, word_size = 0, num_channel = 0;
- sfreq = str_param->sparams.uc.pcm_params.sfreq;
- word_size = str_param->sparams.
- uc.pcm_params.pcm_wd_sz;
- num_channel = str_param->
- sparams.uc.pcm_params.num_chan;
- if (str_param->ops == STREAM_OPS_CAPTURE) {
+ sfreq = str_param.sparams.uc.pcm_params.sfreq;
+ word_size = str_param.sparams.uc.pcm_params.pcm_wd_sz;
+ num_channel = str_param.sparams.uc.pcm_params.num_chan;
+ if (str_param.ops == STREAM_OPS_CAPTURE) {
sst_drv_ctx->scard_ops->\
set_pcm_audio_params(sfreq,
word_size, num_channel);
break;
}
case _IOC_NR(SNDRV_SST_SET_VOL): {
- struct snd_sst_vol *set_vol;
- struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
+ struct snd_sst_vol set_vol;
+
+ if (copy_from_user(&set_vol, (void __user *)arg,
+ sizeof(set_vol))) {
+ pr_debug("sst: copy failed\n");
+ retval = -EFAULT;
+ break;
+ }
pr_debug("sst: SET_VOLUME recieved for %d!\n",
- rec_vol->stream_id);
- if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
+ set_vol.stream_id);
+ if (minor == STREAM_MODULE && set_vol.stream_id == 0) {
pr_debug("sst: invalid operation!\n");
retval = -EPERM;
break;
}
- set_vol = kzalloc(sizeof(*set_vol), GFP_ATOMIC);
- if (!set_vol) {
- pr_debug("sst: mem allocation failed\n");
- retval = -ENOMEM;
- break;
- }
- if (copy_from_user(set_vol, rec_vol, sizeof(*set_vol))) {
- pr_debug("sst: copy failed\n");
- retval = -EFAULT;
- break;
- }
- retval = sst_set_vol(set_vol);
- kfree(set_vol);
+ retval = sst_set_vol(&set_vol);
break;
}
case _IOC_NR(SNDRV_SST_GET_VOL): {
- struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
struct snd_sst_vol get_vol;
+
+ if (copy_from_user(&get_vol, (void __user *)arg,
+ sizeof(get_vol))) {
+ retval = -EFAULT;
+ break;
+ }
pr_debug("sst: IOCTL_GET_VOLUME recieved for stream = %d!\n",
- rec_vol->stream_id);
- if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
+ get_vol.stream_id);
+ if (minor == STREAM_MODULE && get_vol.stream_id == 0) {
pr_debug("sst: invalid operation!\n");
retval = -EPERM;
break;
}
- get_vol.stream_id = rec_vol->stream_id;
retval = sst_get_vol(&get_vol);
if (retval) {
retval = -EIO;
pr_debug("sst: id:%d\n, vol:%d, ramp_dur:%d, ramp_type:%d\n",
get_vol.stream_id, get_vol.volume,
get_vol.ramp_duration, get_vol.ramp_type);
- if (copy_to_user((struct snd_sst_vol *)arg,
+ if (copy_to_user((struct snd_sst_vol __user *)arg,
&get_vol, sizeof(get_vol))) {
retval = -EFAULT;
break;
}
case _IOC_NR(SNDRV_SST_MUTE): {
- struct snd_sst_mute *set_mute;
- struct snd_sst_vol *rec_mute = (struct snd_sst_vol *)arg;
- pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
- rec_mute->stream_id);
- if (minor == STREAM_MODULE && rec_mute->stream_id == 0) {
- retval = -EPERM;
- break;
- }
- set_mute = kzalloc(sizeof(*set_mute), GFP_ATOMIC);
- if (!set_mute) {
- retval = -ENOMEM;
+ struct snd_sst_mute set_mute;
+
+ if (copy_from_user(&set_mute, (void __user *)arg,
+ sizeof(set_mute))) {
+ retval = -EFAULT;
break;
}
- if (copy_from_user(set_mute, rec_mute, sizeof(*set_mute))) {
- retval = -EFAULT;
+ pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
+ set_mute.stream_id);
+ if (minor == STREAM_MODULE && set_mute.stream_id == 0) {
+ retval = -EPERM;
break;
}
- retval = sst_set_mute(set_mute);
- kfree(set_mute);
+ retval = sst_set_mute(&set_mute);
break;
}
case _IOC_NR(SNDRV_SST_STREAM_GET_PARAMS): {
retval = -EIO;
break;
}
- if (copy_to_user((struct snd_sst_get_stream_params *)arg,
+ if (copy_to_user((struct snd_sst_get_stream_params __user *)arg,
&get_params, sizeof(get_params))) {
retval = -EFAULT;
break;
}
case _IOC_NR(SNDRV_SST_MMAP_PLAY):
- case _IOC_NR(SNDRV_SST_MMAP_CAPTURE):
+ case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): {
+ struct snd_sst_mmap_buffs mmap_buf;
+
pr_debug("sst: SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n");
if (minor != STREAM_MODULE) {
retval = -EBADRQC;
break;
}
- retval = intel_sst_mmap_play_capture(str_id,
- (struct snd_sst_mmap_buffs *)arg);
+ if (copy_from_user(&mmap_buf, (void __user *)arg,
+ sizeof(mmap_buf))) {
+ retval = -EFAULT;
+ break;
+ }
+ retval = intel_sst_mmap_play_capture(str_id, &mmap_buf);
break;
-
+ }
case _IOC_NR(SNDRV_SST_STREAM_DROP):
pr_debug("sst: SNDRV_SST_IOCTL_DROP recieved!\n");
if (minor != STREAM_MODULE) {
break;
case _IOC_NR(SNDRV_SST_STREAM_GET_TSTAMP): {
- unsigned long long *ms = (unsigned long long *)arg;
struct snd_sst_tstamp tstamp = {0};
unsigned long long time, freq, mod;
break;
}
memcpy_fromio(&tstamp,
- ((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
- +(str_id * sizeof(tstamp))),
+ sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
sizeof(tstamp));
time = tstamp.samples_rendered;
freq = (unsigned long long) tstamp.sampling_frequency;
time = time * 1000; /* converting it to ms */
mod = do_div(time, freq);
- if (copy_to_user(ms, &time, sizeof(*ms)))
+ if (copy_to_user((void __user *)arg, &time,
+ sizeof(unsigned long long)))
retval = -EFAULT;
break;
}
}
case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): {
- struct snd_sst_target_device *target_device;
+ struct snd_sst_target_device target_device;
pr_debug("sst: SET_TARGET_DEVICE recieved!\n");
- target_device = (struct snd_sst_target_device *)arg;
- BUG_ON(!target_device);
+ if (copy_from_user(&target_device, (void __user *)arg,
+ sizeof(target_device))) {
+ retval = -EFAULT;
+ break;
+ }
if (minor != AM_MODULE) {
retval = -EBADRQC;
break;
}
- retval = sst_target_device_select(target_device);
+ retval = sst_target_device_select(&target_device);
break;
}
case _IOC_NR(SNDRV_SST_DRIVER_INFO): {
- struct snd_sst_driver_info *info =
- (struct snd_sst_driver_info *)arg;
+ struct snd_sst_driver_info info;
pr_debug("sst: SNDRV_SST_DRIVER_INFO recived\n");
- info->version = SST_VERSION_NUM;
+ info.version = SST_VERSION_NUM;
/* hard coding, shud get sumhow later */
- info->active_pcm_streams = sst_drv_ctx->stream_cnt -
+ info.active_pcm_streams = sst_drv_ctx->stream_cnt -
sst_drv_ctx->encoded_cnt;
- info->active_enc_streams = sst_drv_ctx->encoded_cnt;
- info->max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
- info->max_enc_streams = MAX_ENC_STREAM;
- info->buf_per_stream = sst_drv_ctx->mmap_len;
+ info.active_enc_streams = sst_drv_ctx->encoded_cnt;
+ info.max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
+ info.max_enc_streams = MAX_ENC_STREAM;
+ info.buf_per_stream = sst_drv_ctx->mmap_len;
+ if (copy_to_user((void __user *)arg, &info,
+ sizeof(info)))
+ retval = -EFAULT;
break;
}
case _IOC_NR(SNDRV_SST_STREAM_DECODE): {
- struct snd_sst_dbufs *param =
- (struct snd_sst_dbufs *)arg, dbufs_local;
- int i;
+ struct snd_sst_dbufs param;
+ struct snd_sst_dbufs dbufs_local;
struct snd_sst_buffs ibufs, obufs;
- struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries],
- obuf_temp[param->obufs->entries];
+ struct snd_sst_buff_entry *ibuf_tmp, *obuf_tmp;
+ char __user *dest;
pr_debug("sst: SNDRV_SST_STREAM_DECODE recived\n");
if (minor != STREAM_MODULE) {
retval = -EBADRQC;
break;
}
- if (!param) {
- retval = -EINVAL;
+ if (copy_from_user(¶m, (void __user *)arg,
+ sizeof(param))) {
+ retval = -EFAULT;
break;
}
- dbufs_local.input_bytes_consumed = param->input_bytes_consumed;
+ dbufs_local.input_bytes_consumed = param.input_bytes_consumed;
dbufs_local.output_bytes_produced =
- param->output_bytes_produced;
- dbufs_local.ibufs = &ibufs;
- dbufs_local.obufs = &obufs;
- dbufs_local.ibufs->entries = param->ibufs->entries;
- dbufs_local.ibufs->type = param->ibufs->type;
- dbufs_local.obufs->entries = param->obufs->entries;
- dbufs_local.obufs->type = param->obufs->type;
-
- dbufs_local.ibufs->buff_entry = ibuf_temp;
- for (i = 0; i < dbufs_local.ibufs->entries; i++) {
- ibuf_temp[i].buffer =
- param->ibufs->buff_entry[i].buffer;
- ibuf_temp[i].size =
- param->ibufs->buff_entry[i].size;
+ param.output_bytes_produced;
+
+ if (copy_from_user(&ibufs, (void __user *)param.ibufs, sizeof(ibufs))) {
+ retval = -EFAULT;
+ break;
+ }
+ if (copy_from_user(&obufs, (void __user *)param.obufs, sizeof(obufs))) {
+ retval = -EFAULT;
+ break;
}
- dbufs_local.obufs->buff_entry = obuf_temp;
- for (i = 0; i < dbufs_local.obufs->entries; i++) {
- obuf_temp[i].buffer =
- param->obufs->buff_entry[i].buffer;
- obuf_temp[i].size =
- param->obufs->buff_entry[i].size;
+
+ ibuf_tmp = kcalloc(ibufs.entries, sizeof(*ibuf_tmp), GFP_KERNEL);
+ obuf_tmp = kcalloc(obufs.entries, sizeof(*obuf_tmp), GFP_KERNEL);
+ if (!ibuf_tmp || !obuf_tmp) {
+ retval = -ENOMEM;
+ goto free_iobufs;
+ }
+
+ if (copy_from_user(ibuf_tmp, (void __user *)ibufs.buff_entry,
+ ibufs.entries * sizeof(*ibuf_tmp))) {
+ retval = -EFAULT;
+ goto free_iobufs;
}
+ ibufs.buff_entry = ibuf_tmp;
+ dbufs_local.ibufs = &ibufs;
+
+ if (copy_from_user(obuf_tmp, (void __user *)obufs.buff_entry,
+ obufs.entries * sizeof(*obuf_tmp))) {
+ retval = -EFAULT;
+ goto free_iobufs;
+ }
+ obufs.buff_entry = obuf_tmp;
+ dbufs_local.obufs = &obufs;
+
retval = sst_decode(str_id, &dbufs_local);
- if (retval)
- retval = -EAGAIN;
- if (copy_to_user(¶m->input_bytes_consumed,
+ if (retval) {
+ retval = -EAGAIN;
+ goto free_iobufs;
+ }
+
+ dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+ if (copy_to_user(dest,
&dbufs_local.input_bytes_consumed,
sizeof(unsigned long long))) {
- retval = -EFAULT;
- break;
+ retval = -EFAULT;
+ goto free_iobufs;
}
- if (copy_to_user(¶m->output_bytes_produced,
+
+ dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+ if (copy_to_user(dest,
&dbufs_local.output_bytes_produced,
sizeof(unsigned long long))) {
- retval = -EFAULT;
- break;
+ retval = -EFAULT;
+ goto free_iobufs;
}
+free_iobufs:
+ kfree(ibuf_tmp);
+ kfree(obuf_tmp);
break;
}
break;
case _IOC_NR(SNDRV_SST_STREAM_BYTES_DECODED): {
- unsigned long long *bytes = (unsigned long long *)arg;
+ unsigned long long __user *bytes = (unsigned long long __user *)arg;
struct snd_sst_tstamp tstamp = {0};
pr_debug("sst: STREAM_BYTES_DECODED recieved!\n");
break;
}
memcpy_fromio(&tstamp,
- ((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
- +(str_id * sizeof(tstamp))),
+ sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
sizeof(tstamp));
if (copy_to_user(bytes, &tstamp.bytes_processed,
sizeof(*bytes)))
kfree(fw_info);
break;
}
- if (copy_to_user((struct snd_sst_dbufs *)arg,
+ if (copy_to_user((struct snd_sst_dbufs __user *)arg,
fw_info, sizeof(*fw_info))) {
kfree(fw_info);
retval = -EFAULT;
spinlock_t pcm_lock;
bool mmapped;
unsigned int sg_index; /* current buf Index */
- unsigned char *cur_ptr; /* Current static bufs */
- struct snd_sst_buf_entry *buf_entry;
+ unsigned char __user *cur_ptr; /* Current static bufs */
+ struct snd_sst_buf_entry __user *buf_entry;
struct sst_block data_blk; /* stream ops block */
struct sst_block ctrl_blk; /* stream control cmd block */
enum snd_sst_buf_type buf_type;
int result;
BYTE MiscReg03 = 0;
- printk("--- Initial Nedia ---\n");
+ printk("--- Init Media ---\n");
result = ENE_Read_BYTE(us, REG_CARD_STATUS, &MiscReg03);
if (result != USB_STOR_XFER_GOOD)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x01;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
}
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Flags = 0x80;
bcb->CDB[0] = 0xF2;
return USB_STOR_TRANSPORT_ERROR;
}
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
}
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
}
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
break;
}
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x800;
bcb->Flags =0x00;
//printk("transport --- ENE_Read_Data\n");
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = length;
bcb->Flags =0x80;
//printk("transport --- ENE_Write_Data\n");
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = length;
bcb->Flags =0x00;
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200*len;
bcb->Flags = 0x00;
return USB_STOR_TRANSPORT_ERROR;
// Read Page Data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
// Read Extra Data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x4;
bcb->Flags = 0x80;
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
//printk("MS_LibReadExtraBlock --- PhyBlock = %x, PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen);
// Read Extra Data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x4 * blen;
bcb->Flags = 0x80;
BYTE ExtBuf[4];
//printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum);
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x4;
bcb->Flags = 0x80;
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x4;
bcb->Flags = 0x80;
}
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x80;
blkno = phyblk * 0x20 + PageNum;
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200 * len;
bcb->Flags = 0x80;
}
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x00;
bnByte = bn;
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x80;
bnByte = bn;
// set up the command wrapper
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x00;
addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
// Read sect data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
// Read redundant
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x10;
bcb->Flags = 0x80;
addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
// Read sect data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200*count;
bcb->Flags = 0x80;
return USB_STOR_TRANSPORT_ERROR;
// Read redundant
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x10;
bcb->Flags = 0x80;
WriteAddr = WriteAddr*(WORD)Ssfdc.MaxSectors;
// Write sect data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200*count;
bcb->Flags = 0x00;
addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
// Write sect data
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x00;
addr=(WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
addr=addr*(WORD)Ssfdc.MaxSectors;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200;
bcb->Flags = 0x80;
addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x10;
bcb->Flags = 0x80;
addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
- memset(bcb, 0, sizeof(bcb));
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x10;
bcb->Flags = 0x80;
us->current_urb->error_count = 0;
us->current_urb->status = 0;
-// us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
+ us->current_urb->transfer_flags = 0;
if (us->current_urb->transfer_buffer == us->iobuf)
us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
us->current_urb->transfer_dma = us->iobuf_dma;
#include <linux/console.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
-#include <linux/i2c-id.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
edev:
platform_device_unregister(dcon_device);
dcon_device = NULL;
- i2c_set_clientdata(client, NULL);
eirq:
free_irq(DCON_IRQ, &dcon_driver);
einit:
platform_device_unregister(dcon_device);
cancel_work_sync(&dcon_work);
- i2c_set_clientdata(client, NULL);
-
return 0;
}
for (i = 8; i < 14; i++)
mic_iv[i] = pn_vector[13 - i]; /* mic_iv[8:13] = PN[5:0] */
#endif
- i = (payload_length / 256);
- i = (payload_length % 256);
mic_iv[14] = (unsigned char)(payload_length / 256);
mic_iv[15] = (unsigned char)(payload_length % 256);
{USB_DEVICE(0x14B2, 0x3C07)}, /* AL */
{USB_DEVICE(0x050D, 0x8053)}, /* Belkin */
{USB_DEVICE(0x050D, 0x825B)}, /* Belkin */
+ {USB_DEVICE(0x050D, 0x935A)}, /* Belkin F6D4050 v1 */
{USB_DEVICE(0x050D, 0x935B)}, /* Belkin F6D4050 v2 */
{USB_DEVICE(0x14B2, 0x3C23)}, /* Airlink */
{USB_DEVICE(0x14B2, 0x3C27)}, /* Airlink */
}
}
+ pci_unmap_single(priv->pdev, *((dma_addr_t *) skb->cb),
+ priv->rxbuffersize, PCI_DMA_FROMDEVICE);
+
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
*((dma_addr_t *) skb->cb) = pci_map_single(priv->pdev, skb_tail_pointer(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE);
&solo_enc->lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
- sizeof(struct videobuf_buffer), fh);
+ sizeof(struct videobuf_buffer), fh, NULL);
spin_unlock(&solo_enc->lock);
&solo_dev->pdev->dev, &fh->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
SOLO_DISP_PIX_FIELD,
- sizeof(struct videobuf_buffer), fh);
+ sizeof(struct videobuf_buffer), fh, NULL);
return 0;
}
case VIDIOCGCAP:
{
struct video_capability b;
+ memset(&b, 0, sizeof(b));
strcpy(b.name, saa->video_dev.name);
b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY |
VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM |
case VIDIOCGWIN:
{
struct video_window vw;
+ memset(&vw, 0, sizeof(vw));
vw.x = saa->win.x;
vw.y = saa->win.y;
vw.width = saa->win.width;
case VIDIOCGFBUF:
{
struct video_buffer v;
+ memset(&v, 0, sizeof(v));
v.base = (void *)saa->win.vidadr;
v.height = saa->win.sheight;
v.width = saa->win.swidth;
case VIDIOCGAUDIO:
{
struct video_audio v;
+ memset(&v, 0, sizeof(v));
v = saa->audio_dev;
v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
case VIDIOCGUNIT:
{
struct video_unit vu;
+ memset(&vu, 0, sizeof(vu));
vu.video = saa->video_dev.minor;
vu.vbi = VIDEO_NO_UNIT;
vu.radio = VIDEO_NO_UNIT;
saa->user++;
if (saa->user > 1) {
+ saa->user--;
unlock_kernel();
return 0; /* device open already, don't reset */
}
if (retval < 0) {
dev_err(&pdev->dev, "%d: error in registering video device!\n",
num);
- goto errio;
+ goto errirq;
}
return 0;
+
+errirq:
+ free_irq(saa->irq, saa);
errio:
iounmap(saa->saa7146_mem);
err:
tristate "DSP Bridge driver"
depends on ARCH_OMAP3
select OMAP_MBOX_FWK
- select OMAP_IOMMU
help
DSP/BIOS Bridge is designed for platforms that contain a GPP and
one or more attached DSPs. The GPP is considered the master or
libgen = gen/gb.o gen/gs.o gen/gh.o gen/uuidutil.o
libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \
- core/tiomap3430_pwr.o core/tiomap_io.o core/dsp-mmu.o \
+ core/tiomap3430_pwr.o core/tiomap_io.o \
core/ue_deh.o core/wdt.o core/dsp-clock.o core/sync.o
libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \
- pmgr/cmm.o pmgr/dbll.o
+ pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o
librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
rmgr/proc.o rmgr/pwr.o rmgr/rmm.o rmgr/strm.o rmgr/dspdrv.o \
rmgr/nldr.o rmgr/drv_interface.o
libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \
dynload/tramp.o
+libhw = hw/hw_mmu.o
bridgedriver-y := $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \
- $(libdload)
+ $(libdload) $(libhw)
#Machine dependent
ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \
struct deh_mgr {
struct bridge_dev_context *hbridge_context; /* Bridge context. */
struct ntfy_object *ntfy_obj; /* NTFY object */
-};
-int mmu_fault_isr(struct iommu *mmu);
+ /* MMU Fault DPC */
+ struct tasklet_struct dpc_tasklet;
+};
#endif /* _DEH_ */
#include <plat/clockdomain.h>
#include <mach-omap2/prm-regbits-34xx.h>
#include <mach-omap2/cm-regbits-34xx.h>
-#include <dspbridge/dsp-mmu.h>
#include <dspbridge/devdefs.h>
+#include <hw_defs.h>
#include <dspbridge/dspioctl.h> /* for bridge_ioctl_extproc defn */
#include <dspbridge/sync.h>
#include <dspbridge/clk.h>
#define CLEAR_BIT_INDEX(reg, index) (reg &= ~(1 << (index)))
-struct shm_segs {
- u32 seg0_da;
- u32 seg0_pa;
- u32 seg0_va;
- u32 seg0_size;
- u32 seg1_da;
- u32 seg1_pa;
- u32 seg1_va;
- u32 seg1_size;
-};
-
-
/* This Bridge driver's device context: */
struct bridge_dev_context {
struct dev_object *hdev_obj; /* Handle to Bridge device object. */
*/
u32 dw_dsp_ext_base_addr; /* See the comment above */
u32 dw_api_reg_base; /* API mem map'd registers */
+ void __iomem *dw_dsp_mmu_base; /* DSP MMU Mapped registers */
u32 dw_api_clk_base; /* CLK Registers */
u32 dw_dsp_clk_m2_base; /* DSP Clock Module m2 */
u32 dw_public_rhea; /* Pub Rhea */
u32 dw_internal_size; /* Internal memory size */
struct omap_mbox *mbox; /* Mail box handle */
- struct iommu *dsp_mmu; /* iommu for iva2 handler */
- struct shm_segs sh_s;
+
struct cfg_hostres *resources; /* Host Resources */
/*
/* TC Settings */
bool tc_word_swap_on; /* Traffic Controller Word Swap */
+ struct pg_table_attrs *pt_attrs;
u32 dsp_per_clks;
};
+++ /dev/null
-/*
- * dsp-mmu.c
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <dspbridge/host_os.h>
-#include <plat/dmtimer.h>
-#include <dspbridge/dbdefs.h>
-#include <dspbridge/dev.h>
-#include <dspbridge/io_sm.h>
-#include <dspbridge/dspdeh.h>
-#include "_tiomap.h"
-
-#include <dspbridge/dsp-mmu.h>
-
-#define MMU_CNTL_TWL_EN (1 << 2)
-
-static struct tasklet_struct mmu_tasklet;
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
-static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
-{
- void *dummy_addr;
- u32 fa, tmp;
- struct iotlb_entry e;
- struct iommu *mmu = dev_context->dsp_mmu;
- dummy_addr = (void *)__get_free_page(GFP_ATOMIC);
-
- /*
- * Before acking the MMU fault, let's make sure MMU can only
- * access entry #0. Then add a new entry so that the DSP OS
- * can continue in order to dump the stack.
- */
- tmp = iommu_read_reg(mmu, MMU_CNTL);
- tmp &= ~MMU_CNTL_TWL_EN;
- iommu_write_reg(mmu, tmp, MMU_CNTL);
- fa = iommu_read_reg(mmu, MMU_FAULT_AD);
- e.da = fa & PAGE_MASK;
- e.pa = virt_to_phys(dummy_addr);
- e.valid = 1;
- e.prsvd = 1;
- e.pgsz = IOVMF_PGSZ_4K & MMU_CAM_PGSZ_MASK;
- e.endian = MMU_RAM_ENDIAN_LITTLE;
- e.elsz = MMU_RAM_ELSZ_32;
- e.mixed = 0;
-
- load_iotlb_entry(mmu, &e);
-
- dsp_clk_enable(DSP_CLK_GPT8);
-
- dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
-
- /* Clear MMU interrupt */
- tmp = iommu_read_reg(mmu, MMU_IRQSTATUS);
- iommu_write_reg(mmu, tmp, MMU_IRQSTATUS);
-
- dump_dsp_stack(dev_context);
- dsp_clk_disable(DSP_CLK_GPT8);
-
- iopgtable_clear_entry(mmu, fa);
- free_page((unsigned long)dummy_addr);
-}
-#endif
-
-
-static void fault_tasklet(unsigned long data)
-{
- struct iommu *mmu = (struct iommu *)data;
- struct bridge_dev_context *dev_ctx;
- struct deh_mgr *dm;
- u32 fa;
- dev_get_deh_mgr(dev_get_first(), &dm);
- dev_get_bridge_context(dev_get_first(), &dev_ctx);
-
- if (!dm || !dev_ctx)
- return;
-
- fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
- print_dsp_trace_buffer(dev_ctx);
- dump_dl_modules(dev_ctx);
- mmu_fault_print_stack(dev_ctx);
-#endif
-
- bridge_deh_notify(dm, DSP_MMUFAULT, fa);
-}
-
-/*
- * ======== mmu_fault_isr ========
- * ISR to be triggered by a DSP MMU fault interrupt.
- */
-static int mmu_fault_callback(struct iommu *mmu)
-{
- if (!mmu)
- return -EPERM;
-
- iommu_write_reg(mmu, 0, MMU_IRQENABLE);
- tasklet_schedule(&mmu_tasklet);
- return 0;
-}
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init()
-{
- struct iommu *mmu;
-
- mmu = iommu_get("iva2");
-
- if (!IS_ERR(mmu)) {
- tasklet_init(&mmu_tasklet, fault_tasklet, (unsigned long)mmu);
- mmu->isr = mmu_fault_callback;
- }
-
- return mmu;
-}
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu: Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu)
-{
- if (mmu)
- iommu_put(mmu);
- tasklet_kill(&mmu_tasklet);
-}
-
-/**
- * user_va2_pa() - get physical address from userspace address.
- * @mm: mm_struct Pointer of the process.
- * @address: Virtual user space address.
- *
- */
-static u32 user_va2_pa(struct mm_struct *mm, u32 address)
-{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *ptep, pte;
-
- pgd = pgd_offset(mm, address);
- if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
- pmd = pmd_offset(pgd, address);
- if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
- ptep = pte_offset_map(pmd, address);
- if (ptep) {
- pte = *ptep;
- if (pte_present(pte))
- return pte & PAGE_MASK;
- }
- }
- }
-
- return 0;
-}
-
-/**
- * get_io_pages() - pin and get pages of io user's buffer.
- * @mm: mm_struct Pointer of the process.
- * @uva: Virtual user space address.
- * @pages Pages to be pined.
- * @usr_pgs struct page array pointer where the user pages will be stored
- *
- */
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
- struct page **usr_pgs)
-{
- u32 pa;
- int i;
- struct page *pg;
-
- for (i = 0; i < pages; i++) {
- pa = user_va2_pa(mm, uva);
-
- if (!pfn_valid(__phys_to_pfn(pa)))
- break;
-
- pg = phys_to_page(pa);
- usr_pgs[i] = pg;
- get_page(pg);
- }
- return i;
-}
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu: Pointer to iommu handle.
- * @uva: Virtual user space address.
- * @da DSP address
- * @size Buffer size to map.
- * @usr_pgs struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
- struct page **usr_pgs)
-{
- int res, w;
- unsigned pages;
- int i;
- struct vm_area_struct *vma;
- struct mm_struct *mm = current->mm;
- struct sg_table *sgt;
- struct scatterlist *sg;
-
- if (!size || !usr_pgs)
- return -EINVAL;
-
- pages = size / PG_SIZE4K;
-
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, uva);
- while (vma && (uva + size > vma->vm_end))
- vma = find_vma(mm, vma->vm_end + 1);
-
- if (!vma) {
- pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
- __func__, uva, size);
- up_read(&mm->mmap_sem);
- return -EINVAL;
- }
- if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
- w = 1;
-
- if (vma->vm_flags & VM_IO)
- i = get_io_pages(mm, uva, pages, usr_pgs);
- else
- i = get_user_pages(current, mm, uva, pages, w, 1,
- usr_pgs, NULL);
- up_read(&mm->mmap_sem);
-
- if (i < 0)
- return i;
-
- if (i < pages) {
- res = -EFAULT;
- goto err_pages;
- }
-
- sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
- if (!sgt) {
- res = -ENOMEM;
- goto err_pages;
- }
-
- res = sg_alloc_table(sgt, pages, GFP_KERNEL);
-
- if (res < 0)
- goto err_sg;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i)
- sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
-
- da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-
- if (!IS_ERR_VALUE(da))
- return da;
- res = (int)da;
-
- sg_free_table(sgt);
-err_sg:
- kfree(sgt);
- i = pages;
-err_pages:
- while (i--)
- put_page(usr_pgs[i]);
- return res;
-}
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu: Pointer to iommu handle.
- * @da DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da)
-{
- unsigned i;
- struct sg_table *sgt;
- struct scatterlist *sg;
-
- sgt = iommu_vunmap(mmu, da);
- if (!sgt)
- return -EFAULT;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i)
- put_page(sg_page(sg));
- sg_free_table(sgt);
- kfree(sgt);
-
- return 0;
-}
#include <dspbridge/ntfy.h>
#include <dspbridge/sync.h>
+/* Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
/* Bridge Driver */
#include <dspbridge/dspdeh.h>
#include <dspbridge/dspio.h>
struct cod_manager *cod_man;
struct chnl_mgr *hchnl_mgr;
struct msg_mgr *hmsg_mgr;
- struct shm_segs *sm_sg;
u32 ul_shm_base;
u32 ul_shm_base_offset;
u32 ul_shm_limit;
struct bridge_ioctl_extproc ae_proc[BRDIOCTL_NUMOFMMUTLB];
struct cfg_hostres *host_res;
struct bridge_dev_context *pbridge_context;
+ u32 map_attrs;
u32 shm0_end;
u32 ul_dyn_ext_base;
u32 ul_seg1_size = 0;
+ u32 pa_curr = 0;
+ u32 va_curr = 0;
+ u32 gpp_va_curr = 0;
+ u32 num_bytes = 0;
+ u32 all_bits = 0;
+ u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+ HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+ };
status = dev_get_bridge_context(hio_mgr->hdev_obj, &pbridge_context);
if (!pbridge_context) {
status = -EFAULT;
goto func_end;
}
- sm_sg = &pbridge_context->sh_s;
-
status = dev_get_cod_mgr(hio_mgr->hdev_obj, &cod_man);
if (!cod_man) {
status = -EFAULT;
if (status)
goto func_end;
- sm_sg->seg1_pa = ul_gpp_pa;
- sm_sg->seg1_da = ul_dyn_ext_base;
- sm_sg->seg1_va = ul_gpp_va;
- sm_sg->seg1_size = ul_seg1_size;
- sm_sg->seg0_pa = ul_gpp_pa + ul_pad_size + ul_seg1_size;
- sm_sg->seg0_da = ul_dsp_va;
- sm_sg->seg0_va = ul_gpp_va + ul_pad_size + ul_seg1_size;
- sm_sg->seg0_size = ul_seg_size;
+ pa_curr = ul_gpp_pa;
+ va_curr = ul_dyn_ext_base * hio_mgr->word_size;
+ gpp_va_curr = ul_gpp_va;
+ num_bytes = ul_seg1_size;
+
+ /*
+ * Try to fit into TLB entries. If not possible, push them to page
+ * tables. It is quite possible that if sections are not on
+ * bigger page boundary, we may end up making several small pages.
+ * So, push them onto page tables, if that is the case.
+ */
+ map_attrs = 0x00000000;
+ map_attrs = DSP_MAPLITTLEENDIAN;
+ map_attrs |= DSP_MAPPHYSICALADDR;
+ map_attrs |= DSP_MAPELEMSIZE32;
+ map_attrs |= DSP_MAPDONOTLOCK;
+
+ while (num_bytes) {
+ /*
+ * To find the max. page size with which both PA & VA are
+ * aligned.
+ */
+ all_bits = pa_curr | va_curr;
+ dev_dbg(bridge, "all_bits %x, pa_curr %x, va_curr %x, "
+ "num_bytes %x\n", all_bits, pa_curr, va_curr,
+ num_bytes);
+ for (i = 0; i < 4; i++) {
+ if ((num_bytes >= page_size[i]) && ((all_bits &
+ (page_size[i] -
+ 1)) == 0)) {
+ status =
+ hio_mgr->intf_fxns->
+ pfn_brd_mem_map(hio_mgr->hbridge_context,
+ pa_curr, va_curr,
+ page_size[i], map_attrs,
+ NULL);
+ if (status)
+ goto func_end;
+ pa_curr += page_size[i];
+ va_curr += page_size[i];
+ gpp_va_curr += page_size[i];
+ num_bytes -= page_size[i];
+ /*
+ * Don't try smaller sizes. Hopefully we have
+ * reached an address aligned to a bigger page
+ * size.
+ */
+ break;
+ }
+ }
+ }
+ pa_curr += ul_pad_size;
+ va_curr += ul_pad_size;
+ gpp_va_curr += ul_pad_size;
+
+ /* Configure the TLB entries for the next cacheable segment */
+ num_bytes = ul_seg_size;
+ va_curr = ul_dsp_va * hio_mgr->word_size;
+ while (num_bytes) {
+ /*
+ * To find the max. page size with which both PA & VA are
+ * aligned.
+ */
+ all_bits = pa_curr | va_curr;
+ dev_dbg(bridge, "all_bits for Seg1 %x, pa_curr %x, "
+ "va_curr %x, num_bytes %x\n", all_bits, pa_curr,
+ va_curr, num_bytes);
+ for (i = 0; i < 4; i++) {
+ if (!(num_bytes >= page_size[i]) ||
+ !((all_bits & (page_size[i] - 1)) == 0))
+ continue;
+ if (ndx < MAX_LOCK_TLB_ENTRIES) {
+ /*
+ * This is the physical address written to
+ * DSP MMU.
+ */
+ ae_proc[ndx].ul_gpp_pa = pa_curr;
+ /*
+ * This is the virtual uncached ioremapped
+ * address!!!
+ */
+ ae_proc[ndx].ul_gpp_va = gpp_va_curr;
+ ae_proc[ndx].ul_dsp_va =
+ va_curr / hio_mgr->word_size;
+ ae_proc[ndx].ul_size = page_size[i];
+ ae_proc[ndx].endianism = HW_LITTLE_ENDIAN;
+ ae_proc[ndx].elem_size = HW_ELEM_SIZE16BIT;
+ ae_proc[ndx].mixed_mode = HW_MMU_CPUES;
+ dev_dbg(bridge, "shm MMU TLB entry PA %x"
+ " VA %x DSP_VA %x Size %x\n",
+ ae_proc[ndx].ul_gpp_pa,
+ ae_proc[ndx].ul_gpp_va,
+ ae_proc[ndx].ul_dsp_va *
+ hio_mgr->word_size, page_size[i]);
+ ndx++;
+ } else {
+ status =
+ hio_mgr->intf_fxns->
+ pfn_brd_mem_map(hio_mgr->hbridge_context,
+ pa_curr, va_curr,
+ page_size[i], map_attrs,
+ NULL);
+ dev_dbg(bridge,
+ "shm MMU PTE entry PA %x"
+ " VA %x DSP_VA %x Size %x\n",
+ ae_proc[ndx].ul_gpp_pa,
+ ae_proc[ndx].ul_gpp_va,
+ ae_proc[ndx].ul_dsp_va *
+ hio_mgr->word_size, page_size[i]);
+ if (status)
+ goto func_end;
+ }
+ pa_curr += page_size[i];
+ va_curr += page_size[i];
+ gpp_va_curr += page_size[i];
+ num_bytes -= page_size[i];
+ /*
+ * Don't try smaller sizes. Hopefully we have reached
+ * an address aligned to a bigger page size.
+ */
+ break;
+ }
+ }
/*
* Copy remaining entries from CDB. All entries are 1 MB and
"DSP_VA 0x%x\n", ae_proc[ndx].ul_gpp_pa,
ae_proc[ndx].ul_dsp_va);
ndx++;
+ } else {
+ status = hio_mgr->intf_fxns->pfn_brd_mem_map
+ (hio_mgr->hbridge_context,
+ hio_mgr->ext_proc_info.ty_tlb[i].
+ ul_gpp_phys,
+ hio_mgr->ext_proc_info.ty_tlb[i].
+ ul_dsp_virt, 0x100000, map_attrs,
+ NULL);
}
}
if (status)
goto func_end;
}
+ map_attrs = 0x00000000;
+ map_attrs = DSP_MAPLITTLEENDIAN;
+ map_attrs |= DSP_MAPPHYSICALADDR;
+ map_attrs |= DSP_MAPELEMSIZE32;
+ map_attrs |= DSP_MAPDONOTLOCK;
+
+ /* Map the L4 peripherals */
+ i = 0;
+ while (l4_peripheral_table[i].phys_addr) {
+ status = hio_mgr->intf_fxns->pfn_brd_mem_map
+ (hio_mgr->hbridge_context, l4_peripheral_table[i].phys_addr,
+ l4_peripheral_table[i].dsp_virt_addr, HW_PAGE_SIZE4KB,
+ map_attrs, NULL);
+ if (status)
+ goto func_end;
+ i++;
+ }
+
for (i = ndx; i < BRDIOCTL_NUMOFMMUTLB; i++) {
ae_proc[i].ul_dsp_va = 0;
ae_proc[i].ul_gpp_pa = 0;
status = -EFAULT;
goto func_end;
} else {
- if (sm_sg->seg0_da > ul_shm_base) {
+ if (ae_proc[0].ul_dsp_va > ul_shm_base) {
status = -EPERM;
goto func_end;
}
/* ul_shm_base may not be at ul_dsp_va address */
- ul_shm_base_offset = (ul_shm_base - sm_sg->seg0_da) *
+ ul_shm_base_offset = (ul_shm_base - ae_proc[0].ul_dsp_va) *
hio_mgr->word_size;
/*
* bridge_dev_ctrl() will set dev context dsp-mmu info. In
goto func_end;
}
/* Register SM */
- status = register_shm_segs(hio_mgr, cod_man, sm_sg->seg0_pa);
+ status =
+ register_shm_segs(hio_mgr, cod_man, ae_proc[0].ul_gpp_pa);
}
hio_mgr->shared_mem = (struct shm *)ul_shm_base;
#include <dspbridge/host_os.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
-#include <plat/control.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
#include <dspbridge/drv.h>
#include <dspbridge/sync.h>
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
/* ----------------------------------- Link Driver */
#include <dspbridge/dspdefs.h>
#include <dspbridge/dspchnl.h>
/* ----------------------------------- Platform Manager */
#include <dspbridge/dev.h>
#include <dspbridge/dspapi.h>
+#include <dspbridge/dmm.h>
#include <dspbridge/wdt.h>
/* ----------------------------------- Local */
#define MMU_SMALL_PAGE_MASK 0xFFFFF000
#define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
#define PAGES_II_LVL_TABLE 512
+#define PHYS_TO_PAGE(phys) pfn_to_page((phys) >> PAGE_SHIFT)
+
+/*
+ * This is a totally ugly layer violation, but needed until
+ * omap_ctrl_set_dsp_boot*() are provided.
+ */
+#define OMAP3_IVA2_BOOTMOD_IDLE 1
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+
+#define OMAP343X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
/* Forward Declarations: */
static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
u8 *host_buff, u32 dsp_addr,
u32 ul_num_bytes, u32 mem_type);
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+ u32 ul_mpu_addr, u32 virt_addr,
+ u32 ul_num_bytes, u32 ul_map_attr,
+ struct page **mapped_pages);
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+ u32 virt_addr, u32 ul_num_bytes);
static int bridge_dev_create(struct bridge_dev_context
**dev_cntxt,
struct dev_object *hdev_obj,
static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
u32 dw_cmd, void *pargs);
static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
+static u32 user_va2_pa(struct mm_struct *mm, u32 address);
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+ u32 va, u32 size,
+ struct hw_mmu_map_attrs_t *map_attrs);
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+ u32 size, struct hw_mmu_map_attrs_t *attrs);
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+ u32 ul_mpu_addr, u32 virt_addr,
+ u32 ul_num_bytes,
+ struct hw_mmu_map_attrs_t *hw_attrs);
+
bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
+/* ----------------------------------- Globals */
+
+/* Attributes of L2 page tables for DSP MMU */
+struct page_info {
+ u32 num_entries; /* Number of valid PTEs in the L2 PT */
+};
+
+/* Attributes used to manage the DSP MMU page tables */
+struct pg_table_attrs {
+ spinlock_t pg_lock; /* Critical section object handle */
+
+ u32 l1_base_pa; /* Physical address of the L1 PT */
+ u32 l1_base_va; /* Virtual address of the L1 PT */
+ u32 l1_size; /* Size of the L1 PT */
+ u32 l1_tbl_alloc_pa;
+ /* Physical address of Allocated mem for L1 table. May not be aligned */
+ u32 l1_tbl_alloc_va;
+ /* Virtual address of Allocated mem for L1 table. May not be aligned */
+ u32 l1_tbl_alloc_sz;
+ /* Size of consistent memory allocated for L1 table.
+ * May not be aligned */
+
+ u32 l2_base_pa; /* Physical address of the L2 PT */
+ u32 l2_base_va; /* Virtual address of the L2 PT */
+ u32 l2_size; /* Size of the L2 PT */
+ u32 l2_tbl_alloc_pa;
+ /* Physical address of Allocated mem for L2 table. May not be aligned */
+ u32 l2_tbl_alloc_va;
+ /* Virtual address of Allocated mem for L2 table. May not be aligned */
+ u32 l2_tbl_alloc_sz;
+ /* Size of consistent memory allocated for L2 table.
+ * May not be aligned */
+
+ u32 l2_num_pages; /* Number of allocated L2 PT */
+ /* Array [l2_num_pages] of L2 PT info structs */
+ struct page_info *pg_info;
+};
+
/*
* This Bridge driver's function interface table.
*/
bridge_brd_set_state,
bridge_brd_mem_copy,
bridge_brd_mem_write,
+ bridge_brd_mem_map,
+ bridge_brd_mem_un_map,
/* The following CHNL functions are provided by chnl_io.lib: */
bridge_chnl_create,
bridge_chnl_destroy,
bridge_msg_set_queue_id,
};
+static inline void flush_all(struct bridge_dev_context *dev_context)
+{
+ if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION ||
+ dev_context->dw_brd_state == BRD_HIBERNATION)
+ wake_dsp(dev_context, NULL);
+
+ hw_mmu_tlb_flush_all(dev_context->dw_dsp_mmu_base);
+}
+
+static void bad_page_dump(u32 pa, struct page *pg)
+{
+ pr_emerg("DSPBRIDGE: MAP function: COUNT 0 FOR PA 0x%x\n", pa);
+ pr_emerg("Bad page state in process '%s'\n"
+ "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
+ "Backtrace:\n",
+ current->comm, pg, (int)(2 * sizeof(unsigned long)),
+ (unsigned long)pg->flags, pg->mapping,
+ page_mapcount(pg), page_count(pg));
+ dump_stack();
+}
+
/*
* ======== bridge_drv_entry ========
* purpose:
(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_DISABLE_AUTO,
OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
}
-
+ (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
dsp_clk_enable(DSP_CLK_IVA2);
/* set the device state to IDLE */
{
int status = 0;
struct bridge_dev_context *dev_context = dev_ctxt;
- struct iommu *mmu = NULL;
- struct shm_segs *sm_sg;
- int l4_i = 0, tlb_i = 0;
- u32 sg0_da = 0, sg1_da = 0;
- struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
u32 dw_sync_addr = 0;
u32 ul_shm_base; /* Gpp Phys SM base addr(byte) */
u32 ul_shm_base_virt; /* Dsp Virt SM base addr */
u32 ul_tlb_base_virt; /* Base of MMU TLB entry */
/* Offset of shm_base_virt from tlb_base_virt */
u32 ul_shm_offset_virt;
+ s32 entry_ndx;
+ s32 itmp_entry_ndx = 0; /* DSP-MMU TLB entry base address */
struct cfg_hostres *resources = NULL;
u32 temp;
u32 ul_dsp_clk_rate;
ul_shm_base_virt *= DSPWORDSIZE;
DBC_ASSERT(ul_shm_base_virt != 0);
/* DSP Virtual address */
- ul_tlb_base_virt = dev_context->sh_s.seg0_da;
+ ul_tlb_base_virt = dev_context->atlb_entry[0].ul_dsp_va;
DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
ul_shm_offset_virt =
ul_shm_base_virt - (ul_tlb_base_virt * DSPWORDSIZE);
/* Kernel logical address */
- ul_shm_base = dev_context->sh_s.seg0_va + ul_shm_offset_virt;
+ ul_shm_base = dev_context->atlb_entry[0].ul_gpp_va + ul_shm_offset_virt;
DBC_ASSERT(ul_shm_base != 0);
/* 2nd wd is used as sync field */
OMAP343X_CONTROL_IVA2_BOOTMOD));
}
}
-
if (!status) {
+ /* Reset and Unreset the RST2, so that BOOTADDR is copied to
+ * IVA2 SYSC register */
+ (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
+ OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+ udelay(100);
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
- mmu = dev_context->dsp_mmu;
- if (mmu)
- dsp_mmu_exit(mmu);
- mmu = dsp_mmu_init();
- if (IS_ERR(mmu)) {
- dev_err(bridge, "dsp_mmu_init failed!\n");
- dev_context->dsp_mmu = NULL;
- status = (int)mmu;
- }
- }
- if (!status) {
- dev_context->dsp_mmu = mmu;
- sm_sg = &dev_context->sh_s;
- sg0_da = iommu_kmap(mmu, sm_sg->seg0_da, sm_sg->seg0_pa,
- sm_sg->seg0_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
- if (IS_ERR_VALUE(sg0_da)) {
- status = (int)sg0_da;
- sg0_da = 0;
- }
- }
- if (!status) {
- sg1_da = iommu_kmap(mmu, sm_sg->seg1_da, sm_sg->seg1_pa,
- sm_sg->seg1_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
- if (IS_ERR_VALUE(sg1_da)) {
- status = (int)sg1_da;
- sg1_da = 0;
- }
- }
- if (!status) {
- u32 da;
- for (tlb_i = 0; tlb_i < BRDIOCTL_NUMOFMMUTLB; tlb_i++) {
- if (!tlb[tlb_i].ul_gpp_pa)
+ udelay(100);
+
+ /* Disbale the DSP MMU */
+ hw_mmu_disable(resources->dw_dmmu_base);
+ /* Disable TWL */
+ hw_mmu_twl_disable(resources->dw_dmmu_base);
+
+ /* Only make TLB entry if both addresses are non-zero */
+ for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB;
+ entry_ndx++) {
+ struct bridge_ioctl_extproc *e = &dev_context->atlb_entry[entry_ndx];
+ struct hw_mmu_map_attrs_t map_attrs = {
+ .endianism = e->endianism,
+ .element_size = e->elem_size,
+ .mixed_size = e->mixed_mode,
+ };
+
+ if (!e->ul_gpp_pa || !e->ul_dsp_va)
continue;
- dev_dbg(bridge, "IOMMU %d GppPa: 0x%x DspVa 0x%x Size"
- " 0x%x\n", tlb_i, tlb[tlb_i].ul_gpp_pa,
- tlb[tlb_i].ul_dsp_va, tlb[tlb_i].ul_size);
-
- da = iommu_kmap(mmu, tlb[tlb_i].ul_dsp_va,
- tlb[tlb_i].ul_gpp_pa, PAGE_SIZE,
- IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
- if (IS_ERR_VALUE(da)) {
- status = (int)da;
- break;
- }
- }
- }
- if (!status) {
- u32 da;
- l4_i = 0;
- while (l4_peripheral_table[l4_i].phys_addr) {
- da = iommu_kmap(mmu, l4_peripheral_table[l4_i].
- dsp_virt_addr, l4_peripheral_table[l4_i].
- phys_addr, PAGE_SIZE,
- IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
- if (IS_ERR_VALUE(da)) {
- status = (int)da;
- break;
- }
- l4_i++;
+ dev_dbg(bridge,
+ "MMU %d, pa: 0x%x, va: 0x%x, size: 0x%x",
+ itmp_entry_ndx,
+ e->ul_gpp_pa,
+ e->ul_dsp_va,
+ e->ul_size);
+
+ hw_mmu_tlb_add(dev_context->dw_dsp_mmu_base,
+ e->ul_gpp_pa,
+ e->ul_dsp_va,
+ e->ul_size,
+ itmp_entry_ndx,
+ &map_attrs, 1, 1);
+
+ itmp_entry_ndx++;
}
}
/* Lock the above TLB entries and get the BIOS and load monitor timer
* information */
if (!status) {
+ hw_mmu_num_locked_set(resources->dw_dmmu_base, itmp_entry_ndx);
+ hw_mmu_victim_num_set(resources->dw_dmmu_base, itmp_entry_ndx);
+ hw_mmu_ttb_set(resources->dw_dmmu_base,
+ dev_context->pt_attrs->l1_base_pa);
+ hw_mmu_twl_enable(resources->dw_dmmu_base);
+ /* Enable the SmartIdle and AutoIdle bit for MMU_SYSCONFIG */
+
+ temp = __raw_readl((resources->dw_dmmu_base) + 0x10);
+ temp = (temp & 0xFFFFFFEF) | 0x11;
+ __raw_writel(temp, (resources->dw_dmmu_base) + 0x10);
+
+ /* Let the DSP MMU run */
+ hw_mmu_enable(resources->dw_dmmu_base);
+
/* Enable the BIOS clock */
(void)dev_get_symbol(dev_context->hdev_obj,
BRIDGEINIT_BIOSGPTIMER, &ul_bios_gp_timer);
(void)dev_get_symbol(dev_context->hdev_obj,
BRIDGEINIT_LOADMON_GPTIMER,
&ul_load_monitor_timer);
+ }
+ if (!status) {
if (ul_load_monitor_timer != 0xFFFF) {
clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
ul_load_monitor_timer;
dev_dbg(bridge, "Not able to get the symbol for Load "
"Monitor Timer\n");
}
+ }
+ if (!status) {
if (ul_bios_gp_timer != 0xFFFF) {
clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
ul_bios_gp_timer;
dev_dbg(bridge,
"Not able to get the symbol for BIOS Timer\n");
}
+ }
+ if (!status) {
/* Set the DSP clock rate */
(void)dev_get_symbol(dev_context->hdev_obj,
"_BRIDGEINIT_DSP_FREQ", &ul_dsp_clk_addr);
/* Let DSP go */
dev_dbg(bridge, "%s Unreset\n", __func__);
+ /* Enable DSP MMU Interrupts */
+ hw_mmu_event_enable(resources->dw_dmmu_base,
+ HW_MMU_ALL_INTERRUPTS);
/* release the RST1, DSP starts executing now .. */
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* update board state */
dev_context->dw_brd_state = BRD_RUNNING;
- return 0;
+ /* (void)chnlsm_enable_interrupt(dev_context); */
} else {
dev_context->dw_brd_state = BRD_UNKNOWN;
}
}
-
- while (tlb_i--) {
- if (!tlb[tlb_i].ul_gpp_pa)
- continue;
- iommu_kunmap(mmu, tlb[tlb_i].ul_gpp_va);
- }
- while (l4_i--)
- iommu_kunmap(mmu, l4_peripheral_table[l4_i].dsp_virt_addr);
- if (sg0_da)
- iommu_kunmap(mmu, sg0_da);
- if (sg1_da)
- iommu_kunmap(mmu, sg1_da);
return status;
}
{
int status = 0;
struct bridge_dev_context *dev_context = dev_ctxt;
+ struct pg_table_attrs *pt_attrs;
u32 dsp_pwr_state;
- int i;
- struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
struct omap_dsp_platform_data *pdata =
omap_dspbridge_dev->dev.platform_data;
dsp_wdt_enable(false);
- /* Reset DSP */
- (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
- OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
+ /* This is a good place to clear the MMU page tables as well */
+ if (dev_context->pt_attrs) {
+ pt_attrs = dev_context->pt_attrs;
+ memset((u8 *) pt_attrs->l1_base_va, 0x00, pt_attrs->l1_size);
+ memset((u8 *) pt_attrs->l2_base_va, 0x00, pt_attrs->l2_size);
+ memset((u8 *) pt_attrs->pg_info, 0x00,
+ (pt_attrs->l2_num_pages * sizeof(struct page_info)));
+ }
/* Disable the mailbox interrupts */
if (dev_context->mbox) {
omap_mbox_disable_irq(dev_context->mbox, IRQ_RX);
omap_mbox_put(dev_context->mbox);
dev_context->mbox = NULL;
}
- if (dev_context->dsp_mmu) {
- pr_err("Proc stop mmu if statement\n");
- for (i = 0; i < BRDIOCTL_NUMOFMMUTLB; i++) {
- if (!tlb[i].ul_gpp_pa)
- continue;
- iommu_kunmap(dev_context->dsp_mmu, tlb[i].ul_gpp_va);
- }
- i = 0;
- while (l4_peripheral_table[i].phys_addr) {
- iommu_kunmap(dev_context->dsp_mmu,
- l4_peripheral_table[i].dsp_virt_addr);
- i++;
- }
- iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg0_da);
- iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg1_da);
- dsp_mmu_exit(dev_context->dsp_mmu);
- dev_context->dsp_mmu = NULL;
- }
- /* Reset IVA IOMMU*/
- (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
- OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+ /* Reset IVA2 clocks*/
+ (*pdata->dsp_prm_write)(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
dsp_clock_disable_all(dev_context->dsp_per_clks);
dsp_clk_disable(DSP_CLK_IVA2);
struct bridge_dev_context *dev_context = NULL;
s32 entry_ndx;
struct cfg_hostres *resources = config_param;
+ struct pg_table_attrs *pt_attrs;
+ u32 pg_tbl_pa;
+ u32 pg_tbl_va;
+ u32 align_size;
struct drv_data *drv_datap = dev_get_drvdata(bridge);
/* Allocate and initialize a data structure to contain the bridge driver
if (!dev_context->dw_dsp_base_addr)
status = -EPERM;
+ pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL);
+ if (pt_attrs != NULL) {
+ /* Assuming that we use only DSP's memory map
+ * until 0x4000:0000 , we would need only 1024
+ * L1 enties i.e L1 size = 4K */
+ pt_attrs->l1_size = 0x1000;
+ align_size = pt_attrs->l1_size;
+ /* Align sizes are expected to be power of 2 */
+ /* we like to get aligned on L1 table size */
+ pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l1_size,
+ align_size, &pg_tbl_pa);
+
+ /* Check if the PA is aligned for us */
+ if ((pg_tbl_pa) & (align_size - 1)) {
+ /* PA not aligned to page table size ,
+ * try with more allocation and align */
+ mem_free_phys_mem((void *)pg_tbl_va, pg_tbl_pa,
+ pt_attrs->l1_size);
+ /* we like to get aligned on L1 table size */
+ pg_tbl_va =
+ (u32) mem_alloc_phys_mem((pt_attrs->l1_size) * 2,
+ align_size, &pg_tbl_pa);
+ /* We should be able to get aligned table now */
+ pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+ pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+ pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size * 2;
+ /* Align the PA to the next 'align' boundary */
+ pt_attrs->l1_base_pa =
+ ((pg_tbl_pa) +
+ (align_size - 1)) & (~(align_size - 1));
+ pt_attrs->l1_base_va =
+ pg_tbl_va + (pt_attrs->l1_base_pa - pg_tbl_pa);
+ } else {
+ /* We got aligned PA, cool */
+ pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+ pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+ pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size;
+ pt_attrs->l1_base_pa = pg_tbl_pa;
+ pt_attrs->l1_base_va = pg_tbl_va;
+ }
+ if (pt_attrs->l1_base_va)
+ memset((u8 *) pt_attrs->l1_base_va, 0x00,
+ pt_attrs->l1_size);
+
+ /* number of L2 page tables = DMM pool used + SHMMEM +EXTMEM +
+ * L4 pages */
+ pt_attrs->l2_num_pages = ((DMMPOOLSIZE >> 20) + 6);
+ pt_attrs->l2_size = HW_MMU_COARSE_PAGE_SIZE *
+ pt_attrs->l2_num_pages;
+ align_size = 4; /* Make it u32 aligned */
+ /* we like to get aligned on L1 table size */
+ pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l2_size,
+ align_size, &pg_tbl_pa);
+ pt_attrs->l2_tbl_alloc_pa = pg_tbl_pa;
+ pt_attrs->l2_tbl_alloc_va = pg_tbl_va;
+ pt_attrs->l2_tbl_alloc_sz = pt_attrs->l2_size;
+ pt_attrs->l2_base_pa = pg_tbl_pa;
+ pt_attrs->l2_base_va = pg_tbl_va;
+
+ if (pt_attrs->l2_base_va)
+ memset((u8 *) pt_attrs->l2_base_va, 0x00,
+ pt_attrs->l2_size);
+
+ pt_attrs->pg_info = kzalloc(pt_attrs->l2_num_pages *
+ sizeof(struct page_info), GFP_KERNEL);
+ dev_dbg(bridge,
+ "L1 pa %x, va %x, size %x\n L2 pa %x, va "
+ "%x, size %x\n", pt_attrs->l1_base_pa,
+ pt_attrs->l1_base_va, pt_attrs->l1_size,
+ pt_attrs->l2_base_pa, pt_attrs->l2_base_va,
+ pt_attrs->l2_size);
+ dev_dbg(bridge, "pt_attrs %p L2 NumPages %x pg_info %p\n",
+ pt_attrs, pt_attrs->l2_num_pages, pt_attrs->pg_info);
+ }
+ if ((pt_attrs != NULL) && (pt_attrs->l1_base_va != 0) &&
+ (pt_attrs->l2_base_va != 0) && (pt_attrs->pg_info != NULL))
+ dev_context->pt_attrs = pt_attrs;
+ else
+ status = -ENOMEM;
+
if (!status) {
+ spin_lock_init(&pt_attrs->pg_lock);
dev_context->tc_word_swap_on = drv_datap->tc_wordswapon;
+
+ /* Set the Clock Divisor for the DSP module */
+ udelay(5);
+ /* MMU address is obtained from the host
+ * resources struct */
+ dev_context->dw_dsp_mmu_base = resources->dw_dmmu_base;
+ }
+ if (!status) {
dev_context->hdev_obj = hdev_obj;
/* Store current board state. */
dev_context->dw_brd_state = BRD_UNKNOWN;
/* Return ptr to our device state to the DSP API for storage */
*dev_cntxt = dev_context;
} else {
+ if (pt_attrs != NULL) {
+ kfree(pt_attrs->pg_info);
+
+ if (pt_attrs->l2_tbl_alloc_va) {
+ mem_free_phys_mem((void *)
+ pt_attrs->l2_tbl_alloc_va,
+ pt_attrs->l2_tbl_alloc_pa,
+ pt_attrs->l2_tbl_alloc_sz);
+ }
+ if (pt_attrs->l1_tbl_alloc_va) {
+ mem_free_phys_mem((void *)
+ pt_attrs->l1_tbl_alloc_va,
+ pt_attrs->l1_tbl_alloc_pa,
+ pt_attrs->l1_tbl_alloc_sz);
+ }
+ }
+ kfree(pt_attrs);
kfree(dev_context);
}
func_end:
*/
static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
{
+ struct pg_table_attrs *pt_attrs;
int status = 0;
struct bridge_dev_context *dev_context = (struct bridge_dev_context *)
dev_ctxt;
/* first put the device to stop state */
bridge_brd_stop(dev_context);
+ if (dev_context->pt_attrs) {
+ pt_attrs = dev_context->pt_attrs;
+ kfree(pt_attrs->pg_info);
+
+ if (pt_attrs->l2_tbl_alloc_va) {
+ mem_free_phys_mem((void *)pt_attrs->l2_tbl_alloc_va,
+ pt_attrs->l2_tbl_alloc_pa,
+ pt_attrs->l2_tbl_alloc_sz);
+ }
+ if (pt_attrs->l1_tbl_alloc_va) {
+ mem_free_phys_mem((void *)pt_attrs->l1_tbl_alloc_va,
+ pt_attrs->l1_tbl_alloc_pa,
+ pt_attrs->l1_tbl_alloc_sz);
+ }
+ kfree(pt_attrs);
+
+ }
if (dev_context->resources) {
host_res = dev_context->resources;
iounmap((void *)host_res->dw_mem_base[3]);
if (host_res->dw_mem_base[4])
iounmap((void *)host_res->dw_mem_base[4]);
+ if (host_res->dw_dmmu_base)
+ iounmap(host_res->dw_dmmu_base);
if (host_res->dw_per_base)
iounmap(host_res->dw_per_base);
if (host_res->dw_per_pm_base)
host_res->dw_mem_base[2] = (u32) NULL;
host_res->dw_mem_base[3] = (u32) NULL;
host_res->dw_mem_base[4] = (u32) NULL;
+ host_res->dw_dmmu_base = NULL;
host_res->dw_sys_ctrl_base = NULL;
kfree(host_res);
return status;
}
+/*
+ * ======== bridge_brd_mem_map ========
+ * This function maps MPU buffer to the DSP address space. It performs
+ * linear to physical address translation if required. It translates each
+ * page since linear addresses can be physically non-contiguous
+ * All address & size arguments are assumed to be page aligned (in proc.c)
+ *
+ * TODO: Disable MMU while updating the page tables (but that'll stall DSP)
+ */
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+ u32 ul_mpu_addr, u32 virt_addr,
+ u32 ul_num_bytes, u32 ul_map_attr,
+ struct page **mapped_pages)
+{
+ u32 attrs;
+ int status = 0;
+ struct bridge_dev_context *dev_context = dev_ctxt;
+ struct hw_mmu_map_attrs_t hw_attrs;
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ u32 write = 0;
+ u32 num_usr_pgs = 0;
+ struct page *mapped_page, *pg;
+ s32 pg_num;
+ u32 va = virt_addr;
+ struct task_struct *curr_task = current;
+ u32 pg_i = 0;
+ u32 mpu_addr, pa;
+
+ dev_dbg(bridge,
+ "%s hDevCtxt %p, pa %x, va %x, size %x, ul_map_attr %x\n",
+ __func__, dev_ctxt, ul_mpu_addr, virt_addr, ul_num_bytes,
+ ul_map_attr);
+ if (ul_num_bytes == 0)
+ return -EINVAL;
+
+ if (ul_map_attr & DSP_MAP_DIR_MASK) {
+ attrs = ul_map_attr;
+ } else {
+ /* Assign default attributes */
+ attrs = ul_map_attr | (DSP_MAPVIRTUALADDR | DSP_MAPELEMSIZE16);
+ }
+ /* Take mapping properties */
+ if (attrs & DSP_MAPBIGENDIAN)
+ hw_attrs.endianism = HW_BIG_ENDIAN;
+ else
+ hw_attrs.endianism = HW_LITTLE_ENDIAN;
+
+ hw_attrs.mixed_size = (enum hw_mmu_mixed_size_t)
+ ((attrs & DSP_MAPMIXEDELEMSIZE) >> 2);
+ /* Ignore element_size if mixed_size is enabled */
+ if (hw_attrs.mixed_size == 0) {
+ if (attrs & DSP_MAPELEMSIZE8) {
+ /* Size is 8 bit */
+ hw_attrs.element_size = HW_ELEM_SIZE8BIT;
+ } else if (attrs & DSP_MAPELEMSIZE16) {
+ /* Size is 16 bit */
+ hw_attrs.element_size = HW_ELEM_SIZE16BIT;
+ } else if (attrs & DSP_MAPELEMSIZE32) {
+ /* Size is 32 bit */
+ hw_attrs.element_size = HW_ELEM_SIZE32BIT;
+ } else if (attrs & DSP_MAPELEMSIZE64) {
+ /* Size is 64 bit */
+ hw_attrs.element_size = HW_ELEM_SIZE64BIT;
+ } else {
+ /*
+ * Mixedsize isn't enabled, so size can't be
+ * zero here
+ */
+ return -EINVAL;
+ }
+ }
+ if (attrs & DSP_MAPDONOTLOCK)
+ hw_attrs.donotlockmpupage = 1;
+ else
+ hw_attrs.donotlockmpupage = 0;
+
+ if (attrs & DSP_MAPVMALLOCADDR) {
+ return mem_map_vmalloc(dev_ctxt, ul_mpu_addr, virt_addr,
+ ul_num_bytes, &hw_attrs);
+ }
+ /*
+ * Do OS-specific user-va to pa translation.
+ * Combine physically contiguous regions to reduce TLBs.
+ * Pass the translated pa to pte_update.
+ */
+ if ((attrs & DSP_MAPPHYSICALADDR)) {
+ status = pte_update(dev_context, ul_mpu_addr, virt_addr,
+ ul_num_bytes, &hw_attrs);
+ goto func_cont;
+ }
+
+ /*
+ * Important Note: ul_mpu_addr is mapped from user application process
+ * to current process - it must lie completely within the current
+ * virtual memory address space in order to be of use to us here!
+ */
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, ul_mpu_addr);
+ if (vma)
+ dev_dbg(bridge,
+ "VMAfor UserBuf: ul_mpu_addr=%x, ul_num_bytes=%x, "
+ "vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+ ul_num_bytes, vma->vm_start, vma->vm_end,
+ vma->vm_flags);
+
+ /*
+ * It is observed that under some circumstances, the user buffer is
+ * spread across several VMAs. So loop through and check if the entire
+ * user buffer is covered
+ */
+ while ((vma) && (ul_mpu_addr + ul_num_bytes > vma->vm_end)) {
+ /* jump to the next VMA region */
+ vma = find_vma(mm, vma->vm_end + 1);
+ dev_dbg(bridge,
+ "VMA for UserBuf ul_mpu_addr=%x ul_num_bytes=%x, "
+ "vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+ ul_num_bytes, vma->vm_start, vma->vm_end,
+ vma->vm_flags);
+ }
+ if (!vma) {
+ pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
+ __func__, ul_mpu_addr, ul_num_bytes);
+ status = -EINVAL;
+ up_read(&mm->mmap_sem);
+ goto func_cont;
+ }
+
+ if (vma->vm_flags & VM_IO) {
+ num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+ mpu_addr = ul_mpu_addr;
+
+ /* Get the physical addresses for user buffer */
+ for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+ pa = user_va2_pa(mm, mpu_addr);
+ if (!pa) {
+ status = -EPERM;
+ pr_err("DSPBRIDGE: VM_IO mapping physical"
+ "address is invalid\n");
+ break;
+ }
+ if (pfn_valid(__phys_to_pfn(pa))) {
+ pg = PHYS_TO_PAGE(pa);
+ get_page(pg);
+ if (page_count(pg) < 1) {
+ pr_err("Bad page in VM_IO buffer\n");
+ bad_page_dump(pa, pg);
+ }
+ }
+ status = pte_set(dev_context->pt_attrs, pa,
+ va, HW_PAGE_SIZE4KB, &hw_attrs);
+ if (status)
+ break;
+
+ va += HW_PAGE_SIZE4KB;
+ mpu_addr += HW_PAGE_SIZE4KB;
+ pa += HW_PAGE_SIZE4KB;
+ }
+ } else {
+ num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+ if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+ write = 1;
+
+ for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+ pg_num = get_user_pages(curr_task, mm, ul_mpu_addr, 1,
+ write, 1, &mapped_page, NULL);
+ if (pg_num > 0) {
+ if (page_count(mapped_page) < 1) {
+ pr_err("Bad page count after doing"
+ "get_user_pages on"
+ "user buffer\n");
+ bad_page_dump(page_to_phys(mapped_page),
+ mapped_page);
+ }
+ status = pte_set(dev_context->pt_attrs,
+ page_to_phys(mapped_page), va,
+ HW_PAGE_SIZE4KB, &hw_attrs);
+ if (status)
+ break;
+
+ if (mapped_pages)
+ mapped_pages[pg_i] = mapped_page;
+
+ va += HW_PAGE_SIZE4KB;
+ ul_mpu_addr += HW_PAGE_SIZE4KB;
+ } else {
+ pr_err("DSPBRIDGE: get_user_pages FAILED,"
+ "MPU addr = 0x%x,"
+ "vma->vm_flags = 0x%lx,"
+ "get_user_pages Err"
+ "Value = %d, Buffer"
+ "size=0x%x\n", ul_mpu_addr,
+ vma->vm_flags, pg_num, ul_num_bytes);
+ status = -EPERM;
+ break;
+ }
+ }
+ }
+ up_read(&mm->mmap_sem);
+func_cont:
+ if (status) {
+ /*
+ * Roll out the mapped pages incase it failed in middle of
+ * mapping
+ */
+ if (pg_i) {
+ bridge_brd_mem_un_map(dev_context, virt_addr,
+ (pg_i * PG_SIZE4K));
+ }
+ status = -EPERM;
+ }
+ /*
+ * In any case, flush the TLB
+ * This is called from here instead from pte_update to avoid unnecessary
+ * repetition while mapping non-contiguous physical regions of a virtual
+ * region
+ */
+ flush_all(dev_context);
+ dev_dbg(bridge, "%s status %x\n", __func__, status);
+ return status;
+}
+
+/*
+ * ======== bridge_brd_mem_un_map ========
+ * Invalidate the PTEs for the DSP VA block to be unmapped.
+ *
+ * PTEs of a mapped memory block are contiguous in any page table
+ * So, instead of looking up the PTE address for every 4K block,
+ * we clear consecutive PTEs until we unmap all the bytes
+ */
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+ u32 virt_addr, u32 ul_num_bytes)
+{
+ u32 l1_base_va;
+ u32 l2_base_va;
+ u32 l2_base_pa;
+ u32 l2_page_num;
+ u32 pte_val;
+ u32 pte_size;
+ u32 pte_count;
+ u32 pte_addr_l1;
+ u32 pte_addr_l2 = 0;
+ u32 rem_bytes;
+ u32 rem_bytes_l2;
+ u32 va_curr;
+ struct page *pg = NULL;
+ int status = 0;
+ struct bridge_dev_context *dev_context = dev_ctxt;
+ struct pg_table_attrs *pt = dev_context->pt_attrs;
+ u32 temp;
+ u32 paddr;
+ u32 numof4k_pages = 0;
+
+ va_curr = virt_addr;
+ rem_bytes = ul_num_bytes;
+ rem_bytes_l2 = 0;
+ l1_base_va = pt->l1_base_va;
+ pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+ dev_dbg(bridge, "%s dev_ctxt %p, va %x, NumBytes %x l1_base_va %x, "
+ "pte_addr_l1 %x\n", __func__, dev_ctxt, virt_addr,
+ ul_num_bytes, l1_base_va, pte_addr_l1);
+
+ while (rem_bytes && !status) {
+ u32 va_curr_orig = va_curr;
+ /* Find whether the L1 PTE points to a valid L2 PT */
+ pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+ pte_val = *(u32 *) pte_addr_l1;
+ pte_size = hw_mmu_pte_size_l1(pte_val);
+
+ if (pte_size != HW_MMU_COARSE_PAGE_SIZE)
+ goto skip_coarse_page;
+
+ /*
+ * Get the L2 PA from the L1 PTE, and find
+ * corresponding L2 VA
+ */
+ l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+ l2_base_va = l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+ l2_page_num =
+ (l2_base_pa - pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+ /*
+ * Find the L2 PTE address from which we will start
+ * clearing, the number of PTEs to be cleared on this
+ * page, and the size of VA space that needs to be
+ * cleared on this L2 page
+ */
+ pte_addr_l2 = hw_mmu_pte_addr_l2(l2_base_va, va_curr);
+ pte_count = pte_addr_l2 & (HW_MMU_COARSE_PAGE_SIZE - 1);
+ pte_count = (HW_MMU_COARSE_PAGE_SIZE - pte_count) / sizeof(u32);
+ if (rem_bytes < (pte_count * PG_SIZE4K))
+ pte_count = rem_bytes / PG_SIZE4K;
+ rem_bytes_l2 = pte_count * PG_SIZE4K;
+
+ /*
+ * Unmap the VA space on this L2 PT. A quicker way
+ * would be to clear pte_count entries starting from
+ * pte_addr_l2. However, below code checks that we don't
+ * clear invalid entries or less than 64KB for a 64KB
+ * entry. Similar checking is done for L1 PTEs too
+ * below
+ */
+ while (rem_bytes_l2 && !status) {
+ pte_val = *(u32 *) pte_addr_l2;
+ pte_size = hw_mmu_pte_size_l2(pte_val);
+ /* va_curr aligned to pte_size? */
+ if (pte_size == 0 || rem_bytes_l2 < pte_size ||
+ va_curr & (pte_size - 1)) {
+ status = -EPERM;
+ break;
+ }
+
+ /* Collect Physical addresses from VA */
+ paddr = (pte_val & ~(pte_size - 1));
+ if (pte_size == HW_PAGE_SIZE64KB)
+ numof4k_pages = 16;
+ else
+ numof4k_pages = 1;
+ temp = 0;
+ while (temp++ < numof4k_pages) {
+ if (!pfn_valid(__phys_to_pfn(paddr))) {
+ paddr += HW_PAGE_SIZE4KB;
+ continue;
+ }
+ pg = PHYS_TO_PAGE(paddr);
+ if (page_count(pg) < 1) {
+ pr_info("DSPBRIDGE: UNMAP function: "
+ "COUNT 0 FOR PA 0x%x, size = "
+ "0x%x\n", paddr, ul_num_bytes);
+ bad_page_dump(paddr, pg);
+ } else {
+ set_page_dirty(pg);
+ page_cache_release(pg);
+ }
+ paddr += HW_PAGE_SIZE4KB;
+ }
+ if (hw_mmu_pte_clear(pte_addr_l2, va_curr, pte_size)) {
+ status = -EPERM;
+ goto EXIT_LOOP;
+ }
+
+ status = 0;
+ rem_bytes_l2 -= pte_size;
+ va_curr += pte_size;
+ pte_addr_l2 += (pte_size >> 12) * sizeof(u32);
+ }
+ spin_lock(&pt->pg_lock);
+ if (rem_bytes_l2 == 0) {
+ pt->pg_info[l2_page_num].num_entries -= pte_count;
+ if (pt->pg_info[l2_page_num].num_entries == 0) {
+ /*
+ * Clear the L1 PTE pointing to the L2 PT
+ */
+ if (!hw_mmu_pte_clear(l1_base_va, va_curr_orig,
+ HW_MMU_COARSE_PAGE_SIZE))
+ status = 0;
+ else {
+ status = -EPERM;
+ spin_unlock(&pt->pg_lock);
+ goto EXIT_LOOP;
+ }
+ }
+ rem_bytes -= pte_count * PG_SIZE4K;
+ } else
+ status = -EPERM;
+
+ spin_unlock(&pt->pg_lock);
+ continue;
+skip_coarse_page:
+ /* va_curr aligned to pte_size? */
+ /* pte_size = 1 MB or 16 MB */
+ if (pte_size == 0 || rem_bytes < pte_size ||
+ va_curr & (pte_size - 1)) {
+ status = -EPERM;
+ break;
+ }
+
+ if (pte_size == HW_PAGE_SIZE1MB)
+ numof4k_pages = 256;
+ else
+ numof4k_pages = 4096;
+ temp = 0;
+ /* Collect Physical addresses from VA */
+ paddr = (pte_val & ~(pte_size - 1));
+ while (temp++ < numof4k_pages) {
+ if (pfn_valid(__phys_to_pfn(paddr))) {
+ pg = PHYS_TO_PAGE(paddr);
+ if (page_count(pg) < 1) {
+ pr_info("DSPBRIDGE: UNMAP function: "
+ "COUNT 0 FOR PA 0x%x, size = "
+ "0x%x\n", paddr, ul_num_bytes);
+ bad_page_dump(paddr, pg);
+ } else {
+ set_page_dirty(pg);
+ page_cache_release(pg);
+ }
+ }
+ paddr += HW_PAGE_SIZE4KB;
+ }
+ if (!hw_mmu_pte_clear(l1_base_va, va_curr, pte_size)) {
+ status = 0;
+ rem_bytes -= pte_size;
+ va_curr += pte_size;
+ } else {
+ status = -EPERM;
+ goto EXIT_LOOP;
+ }
+ }
+ /*
+ * It is better to flush the TLB here, so that any stale old entries
+ * get flushed
+ */
+EXIT_LOOP:
+ flush_all(dev_context);
+ dev_dbg(bridge,
+ "%s: va_curr %x, pte_addr_l1 %x pte_addr_l2 %x rem_bytes %x,"
+ " rem_bytes_l2 %x status %x\n", __func__, va_curr, pte_addr_l1,
+ pte_addr_l2, rem_bytes, rem_bytes_l2, status);
+ return status;
+}
+
+/*
+ * ======== user_va2_pa ========
+ * Purpose:
+ * This function walks through the page tables to convert a userland
+ * virtual address to physical address
+ */
+static u32 user_va2_pa(struct mm_struct *mm, u32 address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *ptep, pte;
+
+ pgd = pgd_offset(mm, address);
+ if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
+ pmd = pmd_offset(pgd, address);
+ if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
+ ptep = pte_offset_map(pmd, address);
+ if (ptep) {
+ pte = *ptep;
+ if (pte_present(pte))
+ return pte & PAGE_MASK;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * ======== pte_update ========
+ * This function calculates the optimum page-aligned addresses and sizes
+ * Caller must pass page-aligned values
+ */
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+ u32 va, u32 size,
+ struct hw_mmu_map_attrs_t *map_attrs)
+{
+ u32 i;
+ u32 all_bits;
+ u32 pa_curr = pa;
+ u32 va_curr = va;
+ u32 num_bytes = size;
+ struct bridge_dev_context *dev_context = dev_ctxt;
+ int status = 0;
+ u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+ HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+ };
+
+ while (num_bytes && !status) {
+ /* To find the max. page size with which both PA & VA are
+ * aligned */
+ all_bits = pa_curr | va_curr;
+
+ for (i = 0; i < 4; i++) {
+ if ((num_bytes >= page_size[i]) && ((all_bits &
+ (page_size[i] -
+ 1)) == 0)) {
+ status =
+ pte_set(dev_context->pt_attrs, pa_curr,
+ va_curr, page_size[i], map_attrs);
+ pa_curr += page_size[i];
+ va_curr += page_size[i];
+ num_bytes -= page_size[i];
+ /* Don't try smaller sizes. Hopefully we have
+ * reached an address aligned to a bigger page
+ * size */
+ break;
+ }
+ }
+ }
+
+ return status;
+}
+
+/*
+ * ======== pte_set ========
+ * This function calculates PTE address (MPU virtual) to be updated
+ * It also manages the L2 page tables
+ */
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+ u32 size, struct hw_mmu_map_attrs_t *attrs)
+{
+ u32 i;
+ u32 pte_val;
+ u32 pte_addr_l1;
+ u32 pte_size;
+ /* Base address of the PT that will be updated */
+ u32 pg_tbl_va;
+ u32 l1_base_va;
+ /* Compiler warns that the next three variables might be used
+ * uninitialized in this function. Doesn't seem so. Working around,
+ * anyways. */
+ u32 l2_base_va = 0;
+ u32 l2_base_pa = 0;
+ u32 l2_page_num = 0;
+ int status = 0;
+
+ l1_base_va = pt->l1_base_va;
+ pg_tbl_va = l1_base_va;
+ if ((size == HW_PAGE_SIZE64KB) || (size == HW_PAGE_SIZE4KB)) {
+ /* Find whether the L1 PTE points to a valid L2 PT */
+ pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va);
+ if (pte_addr_l1 <= (pt->l1_base_va + pt->l1_size)) {
+ pte_val = *(u32 *) pte_addr_l1;
+ pte_size = hw_mmu_pte_size_l1(pte_val);
+ } else {
+ return -EPERM;
+ }
+ spin_lock(&pt->pg_lock);
+ if (pte_size == HW_MMU_COARSE_PAGE_SIZE) {
+ /* Get the L2 PA from the L1 PTE, and find
+ * corresponding L2 VA */
+ l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+ l2_base_va =
+ l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+ l2_page_num =
+ (l2_base_pa -
+ pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+ } else if (pte_size == 0) {
+ /* L1 PTE is invalid. Allocate a L2 PT and
+ * point the L1 PTE to it */
+ /* Find a free L2 PT. */
+ for (i = 0; (i < pt->l2_num_pages) &&
+ (pt->pg_info[i].num_entries != 0); i++)
+ ;;
+ if (i < pt->l2_num_pages) {
+ l2_page_num = i;
+ l2_base_pa = pt->l2_base_pa + (l2_page_num *
+ HW_MMU_COARSE_PAGE_SIZE);
+ l2_base_va = pt->l2_base_va + (l2_page_num *
+ HW_MMU_COARSE_PAGE_SIZE);
+ /* Endianness attributes are ignored for
+ * HW_MMU_COARSE_PAGE_SIZE */
+ status =
+ hw_mmu_pte_set(l1_base_va, l2_base_pa, va,
+ HW_MMU_COARSE_PAGE_SIZE,
+ attrs);
+ } else {
+ status = -ENOMEM;
+ }
+ } else {
+ /* Found valid L1 PTE of another size.
+ * Should not overwrite it. */
+ status = -EPERM;
+ }
+ if (!status) {
+ pg_tbl_va = l2_base_va;
+ if (size == HW_PAGE_SIZE64KB)
+ pt->pg_info[l2_page_num].num_entries += 16;
+ else
+ pt->pg_info[l2_page_num].num_entries++;
+ dev_dbg(bridge, "PTE: L2 BaseVa %x, BasePa %x, PageNum "
+ "%x, num_entries %x\n", l2_base_va,
+ l2_base_pa, l2_page_num,
+ pt->pg_info[l2_page_num].num_entries);
+ }
+ spin_unlock(&pt->pg_lock);
+ }
+ if (!status) {
+ dev_dbg(bridge, "PTE: pg_tbl_va %x, pa %x, va %x, size %x\n",
+ pg_tbl_va, pa, va, size);
+ dev_dbg(bridge, "PTE: endianism %x, element_size %x, "
+ "mixed_size %x\n", attrs->endianism,
+ attrs->element_size, attrs->mixed_size);
+ status = hw_mmu_pte_set(pg_tbl_va, pa, va, size, attrs);
+ }
+
+ return status;
+}
+
+/* Memory map kernel VA -- memory allocated with vmalloc */
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+ u32 ul_mpu_addr, u32 virt_addr,
+ u32 ul_num_bytes,
+ struct hw_mmu_map_attrs_t *hw_attrs)
+{
+ int status = 0;
+ struct page *page[1];
+ u32 i;
+ u32 pa_curr;
+ u32 pa_next;
+ u32 va_curr;
+ u32 size_curr;
+ u32 num_pages;
+ u32 pa;
+ u32 num_of4k_pages;
+ u32 temp = 0;
+
+ /*
+ * Do Kernel va to pa translation.
+ * Combine physically contiguous regions to reduce TLBs.
+ * Pass the translated pa to pte_update.
+ */
+ num_pages = ul_num_bytes / PAGE_SIZE; /* PAGE_SIZE = OS page size */
+ i = 0;
+ va_curr = ul_mpu_addr;
+ page[0] = vmalloc_to_page((void *)va_curr);
+ pa_next = page_to_phys(page[0]);
+ while (!status && (i < num_pages)) {
+ /*
+ * Reuse pa_next from the previous iteraion to avoid
+ * an extra va2pa call
+ */
+ pa_curr = pa_next;
+ size_curr = PAGE_SIZE;
+ /*
+ * If the next page is physically contiguous,
+ * map it with the current one by increasing
+ * the size of the region to be mapped
+ */
+ while (++i < num_pages) {
+ page[0] =
+ vmalloc_to_page((void *)(va_curr + size_curr));
+ pa_next = page_to_phys(page[0]);
+
+ if (pa_next == (pa_curr + size_curr))
+ size_curr += PAGE_SIZE;
+ else
+ break;
+
+ }
+ if (pa_next == 0) {
+ status = -ENOMEM;
+ break;
+ }
+ pa = pa_curr;
+ num_of4k_pages = size_curr / HW_PAGE_SIZE4KB;
+ while (temp++ < num_of4k_pages) {
+ get_page(PHYS_TO_PAGE(pa));
+ pa += HW_PAGE_SIZE4KB;
+ }
+ status = pte_update(dev_context, pa_curr, virt_addr +
+ (va_curr - ul_mpu_addr), size_curr,
+ hw_attrs);
+ va_curr += size_curr;
+ }
+ /*
+ * In any case, flush the TLB
+ * This is called from here instead from pte_update to avoid unnecessary
+ * repetition while mapping non-contiguous physical regions of a virtual
+ * region
+ */
+ flush_all(dev_context);
+ dev_dbg(bridge, "%s status %x\n", __func__, status);
+ return status;
+}
+
/*
* ======== wait_for_start ========
* Wait for the singal from DSP that it has started, or time out.
#include <dspbridge/dev.h>
#include <dspbridge/iodefs.h>
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
#include <dspbridge/pwr_sh.h>
/* ----------------------------------- Bridge Driver */
if (!status) {
ul_tlb_base_virt =
- dev_context->sh_s.seg0_da * DSPWORDSIZE;
+ dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
- dw_ext_prog_virt_mem = dev_context->sh_s.seg0_va;
+ dw_ext_prog_virt_mem =
+ dev_context->atlb_entry[0].ul_gpp_va;
if (!trace_read) {
ul_shm_offset_virt =
ul_shm_base_virt - ul_tlb_base_virt;
ul_shm_offset_virt +=
PG_ALIGN_HIGH(ul_ext_end - ul_dyn_ext_base +
- 1, PAGE_SIZE * 16);
+ 1, HW_PAGE_SIZE64KB);
dw_ext_prog_virt_mem -= ul_shm_offset_virt;
dw_ext_prog_virt_mem +=
(ul_ext_base - ul_dyn_ext_base);
ret = -EPERM;
if (!ret) {
- ul_tlb_base_virt = dev_context->sh_s.seg0_da *
- DSPWORDSIZE;
-
+ ul_tlb_base_virt =
+ dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
if (symbols_reloaded) {
ul_shm_base_virt - ul_tlb_base_virt;
if (trace_load) {
dw_ext_prog_virt_mem =
- dev_context->sh_s.seg0_va;
+ dev_context->atlb_entry[0].ul_gpp_va;
} else {
dw_ext_prog_virt_mem = host_res->dw_mem_base[1];
dw_ext_prog_virt_mem +=
omap_dspbridge_dev->dev.platform_data;
struct cfg_hostres *resources = dev_context->resources;
int status = 0;
+ u32 temp;
if (!dev_context->mbox)
return 0;
omap_mbox_restore_ctx(dev_context->mbox);
/* Access MMU SYS CONFIG register to generate a short wakeup */
- iommu_read_reg(dev_context->dsp_mmu, MMU_SYSCONFIG);
+ temp = readl(resources->dw_dmmu_base + 0x10);
dev_context->dw_brd_state = BRD_RUNNING;
} else if (dev_context->dw_brd_state == BRD_RETENTION) {
#include <dspbridge/drv.h>
#include <dspbridge/wdt.h>
+static u32 fault_addr;
+
+static void mmu_fault_dpc(unsigned long data)
+{
+ struct deh_mgr *deh = (void *)data;
+
+ if (!deh)
+ return;
+
+ bridge_deh_notify(deh, DSP_MMUFAULT, 0);
+}
+
+static irqreturn_t mmu_fault_isr(int irq, void *data)
+{
+ struct deh_mgr *deh = data;
+ struct cfg_hostres *resources;
+ u32 event;
+
+ if (!deh)
+ return IRQ_HANDLED;
+
+ resources = deh->hbridge_context->resources;
+ if (!resources) {
+ dev_dbg(bridge, "%s: Failed to get Host Resources\n",
+ __func__);
+ return IRQ_HANDLED;
+ }
+
+ hw_mmu_event_status(resources->dw_dmmu_base, &event);
+ if (event == HW_MMU_TRANSLATION_FAULT) {
+ hw_mmu_fault_addr_read(resources->dw_dmmu_base, &fault_addr);
+ dev_dbg(bridge, "%s: event=0x%x, fault_addr=0x%x\n", __func__,
+ event, fault_addr);
+ /*
+ * Schedule a DPC directly. In the future, it may be
+ * necessary to check if DSP MMU fault is intended for
+ * Bridge.
+ */
+ tasklet_schedule(&deh->dpc_tasklet);
+
+ /* Disable the MMU events, else once we clear it will
+ * start to raise INTs again */
+ hw_mmu_event_disable(resources->dw_dmmu_base,
+ HW_MMU_TRANSLATION_FAULT);
+ } else {
+ hw_mmu_event_disable(resources->dw_dmmu_base,
+ HW_MMU_ALL_INTERRUPTS);
+ }
+ return IRQ_HANDLED;
+}
+
int bridge_deh_create(struct deh_mgr **ret_deh,
struct dev_object *hdev_obj)
{
}
ntfy_init(deh->ntfy_obj);
+ /* Create a MMUfault DPC */
+ tasklet_init(&deh->dpc_tasklet, mmu_fault_dpc, (u32) deh);
+
/* Fill in context structure */
deh->hbridge_context = hbridge_context;
+ /* Install ISR function for DSP MMU fault */
+ status = request_irq(INT_DSP_MMU_IRQ, mmu_fault_isr, 0,
+ "DspBridge\tiommu fault", deh);
+ if (status < 0)
+ goto err;
+
*ret_deh = deh;
return 0;
ntfy_delete(deh->ntfy_obj);
kfree(deh->ntfy_obj);
}
+ /* Disable DSP MMU fault */
+ free_irq(INT_DSP_MMU_IRQ, deh);
+
+ /* Free DPC object */
+ tasklet_kill(&deh->dpc_tasklet);
/* Deallocate the DEH manager object */
kfree(deh);
return ntfy_unregister(deh->ntfy_obj, hnotification);
}
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
+{
+ struct cfg_hostres *resources;
+ struct hw_mmu_map_attrs_t map_attrs = {
+ .endianism = HW_LITTLE_ENDIAN,
+ .element_size = HW_ELEM_SIZE16BIT,
+ .mixed_size = HW_MMU_CPUES,
+ };
+ void *dummy_va_addr;
+
+ resources = dev_context->resources;
+ dummy_va_addr = (void*)__get_free_page(GFP_ATOMIC);
+
+ /*
+ * Before acking the MMU fault, let's make sure MMU can only
+ * access entry #0. Then add a new entry so that the DSP OS
+ * can continue in order to dump the stack.
+ */
+ hw_mmu_twl_disable(resources->dw_dmmu_base);
+ hw_mmu_tlb_flush_all(resources->dw_dmmu_base);
+
+ hw_mmu_tlb_add(resources->dw_dmmu_base,
+ virt_to_phys(dummy_va_addr), fault_addr,
+ HW_PAGE_SIZE4KB, 1,
+ &map_attrs, HW_SET, HW_SET);
+
+ dsp_clk_enable(DSP_CLK_GPT8);
+
+ dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
+
+ /* Clear MMU interrupt */
+ hw_mmu_event_ack(resources->dw_dmmu_base,
+ HW_MMU_TRANSLATION_FAULT);
+ dump_dsp_stack(dev_context);
+ dsp_clk_disable(DSP_CLK_GPT8);
+
+ hw_mmu_disable(resources->dw_dmmu_base);
+ free_page((unsigned long)dummy_va_addr);
+}
+#endif
+
static inline const char *event_to_string(int event)
{
switch (event) {
#endif
break;
case DSP_MMUFAULT:
- dev_err(bridge, "%s: %s, addr=0x%x", __func__, str, info);
+ dev_err(bridge, "%s: %s, addr=0x%x", __func__,
+ str, fault_addr);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+ print_dsp_trace_buffer(dev_context);
+ dump_dl_modules(dev_context);
+ mmu_fault_print_stack(dev_context);
+#endif
break;
default:
dev_err(bridge, "%s: %s", __func__, str);
--- /dev/null
+/*
+ * EasiGlobal.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _EASIGLOBAL_H
+#define _EASIGLOBAL_H
+#include <linux/types.h>
+
+/*
+ * DEFINE: READ_ONLY, WRITE_ONLY & READ_WRITE
+ *
+ * DESCRIPTION: Defines used to describe register types for EASI-checker tests.
+ */
+
+#define READ_ONLY 1
+#define WRITE_ONLY 2
+#define READ_WRITE 3
+
+/*
+ * MACRO: _DEBUG_LEVEL1_EASI
+ *
+ * DESCRIPTION: A MACRO which can be used to indicate that a particular beach
+ * register access function was called.
+ *
+ * NOTE: We currently dont use this functionality.
+ */
+#define _DEBUG_LEVEL1_EASI(easi_num) ((void)0)
+
+#endif /* _EASIGLOBAL_H */
--- /dev/null
+/*
+ * MMUAccInt.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_ACC_INT_H
+#define _MMU_ACC_INT_H
+
+/* Mappings of level 1 EASI function numbers to function names */
+
+#define EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32 (MMU_BASE_EASIL1 + 3)
+#define EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32 (MMU_BASE_EASIL1 + 17)
+#define EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32 (MMU_BASE_EASIL1 + 39)
+#define EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 51)
+#define EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32 (MMU_BASE_EASIL1 + 102)
+#define EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 103)
+#define EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32 (MMU_BASE_EASIL1 + 156)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32 (MMU_BASE_EASIL1 + 174)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32 (MMU_BASE_EASIL1 + 180)
+#define EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32 (MMU_BASE_EASIL1 + 190)
+#define EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32 (MMU_BASE_EASIL1 + 194)
+#define EASIL1_MMUMMU_TTB_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 198)
+#define EASIL1_MMUMMU_LOCK_READ_REGISTER32 (MMU_BASE_EASIL1 + 203)
+#define EASIL1_MMUMMU_LOCK_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 204)
+#define EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32 (MMU_BASE_EASIL1 + 205)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32 (MMU_BASE_EASIL1 + 209)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32 (MMU_BASE_EASIL1 + 211)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32 (MMU_BASE_EASIL1 + 212)
+#define EASIL1_MMUMMU_LD_TLB_READ_REGISTER32 (MMU_BASE_EASIL1 + 213)
+#define EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 214)
+#define EASIL1_MMUMMU_CAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 226)
+#define EASIL1_MMUMMU_RAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 268)
+#define EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 322)
+
+/* Register offset address definitions */
+#define MMU_MMU_SYSCONFIG_OFFSET 0x10
+#define MMU_MMU_IRQSTATUS_OFFSET 0x18
+#define MMU_MMU_IRQENABLE_OFFSET 0x1c
+#define MMU_MMU_WALKING_ST_OFFSET 0x40
+#define MMU_MMU_CNTL_OFFSET 0x44
+#define MMU_MMU_FAULT_AD_OFFSET 0x48
+#define MMU_MMU_TTB_OFFSET 0x4c
+#define MMU_MMU_LOCK_OFFSET 0x50
+#define MMU_MMU_LD_TLB_OFFSET 0x54
+#define MMU_MMU_CAM_OFFSET 0x58
+#define MMU_MMU_RAM_OFFSET 0x5c
+#define MMU_MMU_GFLUSH_OFFSET 0x60
+#define MMU_MMU_FLUSH_ENTRY_OFFSET 0x64
+/* Bitfield mask and offset declarations */
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_MASK 0x18
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET 3
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK 0x1
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET 0
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_MASK 0x1
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET 0
+#define MMU_MMU_CNTL_TWL_ENABLE_MASK 0x4
+#define MMU_MMU_CNTL_TWL_ENABLE_OFFSET 2
+#define MMU_MMU_CNTL_MMU_ENABLE_MASK 0x2
+#define MMU_MMU_CNTL_MMU_ENABLE_OFFSET 1
+#define MMU_MMU_LOCK_BASE_VALUE_MASK 0xfc00
+#define MMU_MMU_LOCK_BASE_VALUE_OFFSET 10
+#define MMU_MMU_LOCK_CURRENT_VICTIM_MASK 0x3f0
+#define MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET 4
+
+#endif /* _MMU_ACC_INT_H */
--- /dev/null
+/*
+ * MMURegAcM.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_REG_ACM_H
+#define _MMU_REG_ACM_H
+
+#include <linux/io.h>
+#include <EasiGlobal.h>
+
+#include "MMUAccInt.h"
+
+#if defined(USE_LEVEL_1_MACROS)
+
+#define MMUMMU_SYSCONFIG_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32),\
+ __raw_readl((base_address)+MMU_MMU_SYSCONFIG_OFFSET))
+
+#define MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32);\
+ data &= ~(MMU_MMU_SYSCONFIG_IDLE_MODE_MASK);\
+ new_value <<= MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET;\
+ new_value &= MMU_MMU_SYSCONFIG_IDLE_MODE_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32);\
+ data &= ~(MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK);\
+ new_value <<= MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET;\
+ new_value &= MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_IRQSTATUS_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(easil1_mmummu_irqstatus_read_register32),\
+ __raw_readl((base_address)+MMU_MMU_IRQSTATUS_OFFSET))
+
+#define MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_IRQSTATUS_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_IRQENABLE_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32),\
+ __raw_readl((base_address)+MMU_MMU_IRQENABLE_OFFSET))
+
+#define MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_IRQENABLE_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_WALKING_STTWL_RUNNING_READ32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32),\
+ (((__raw_readl(((base_address)+(MMU_MMU_WALKING_ST_OFFSET))))\
+ & MMU_MMU_WALKING_ST_TWL_RUNNING_MASK) >>\
+ MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_READ32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32),\
+ (((__raw_readl(((base_address)+(MMU_MMU_CNTL_OFFSET)))) &\
+ MMU_MMU_CNTL_TWL_ENABLE_MASK) >>\
+ MMU_MMU_CNTL_TWL_ENABLE_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_CNTL_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32);\
+ data &= ~(MMU_MMU_CNTL_TWL_ENABLE_MASK);\
+ new_value <<= MMU_MMU_CNTL_TWL_ENABLE_OFFSET;\
+ new_value &= MMU_MMU_CNTL_TWL_ENABLE_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_CNTL_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32);\
+ data &= ~(MMU_MMU_CNTL_MMU_ENABLE_MASK);\
+ new_value <<= MMU_MMU_CNTL_MMU_ENABLE_OFFSET;\
+ new_value &= MMU_MMU_CNTL_MMU_ENABLE_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_FAULT_AD_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32),\
+ __raw_readl((base_address)+MMU_MMU_FAULT_AD_OFFSET))
+
+#define MMUMMU_TTB_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_TTB_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_TTB_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_READ_REGISTER32),\
+ __raw_readl((base_address)+MMU_MMU_LOCK_OFFSET))
+
+#define MMUMMU_LOCK_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_LOCK_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_BASE_VALUE_READ32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32),\
+ (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+ MMU_MMU_LOCK_BASE_VALUE_MASK) >>\
+ MMU_MMU_LOCK_BASE_VALUE_OFFSET))
+
+#define MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_LOCK_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(easil1_mmummu_lock_base_value_write32);\
+ data &= ~(MMU_MMU_LOCK_BASE_VALUE_MASK);\
+ new_value <<= MMU_MMU_LOCK_BASE_VALUE_OFFSET;\
+ new_value &= MMU_MMU_LOCK_BASE_VALUE_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_READ32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32),\
+ (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+ MMU_MMU_LOCK_CURRENT_VICTIM_MASK) >>\
+ MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET))
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_LOCK_OFFSET;\
+ register u32 data = __raw_readl((base_address)+offset);\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32);\
+ data &= ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK);\
+ new_value <<= MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET;\
+ new_value &= MMU_MMU_LOCK_CURRENT_VICTIM_MASK;\
+ new_value |= data;\
+ __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_SET32(var, value)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32),\
+ (((var) & ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK)) |\
+ (((value) << MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET) &\
+ MMU_MMU_LOCK_CURRENT_VICTIM_MASK)))
+
+#define MMUMMU_LD_TLB_READ_REGISTER32(base_address)\
+ (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_READ_REGISTER32),\
+ __raw_readl((base_address)+MMU_MMU_LD_TLB_OFFSET))
+
+#define MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_LD_TLB_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_CAM_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_CAM_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CAM_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_RAM_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_RAM_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_RAM_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, value)\
+{\
+ const u32 offset = MMU_MMU_FLUSH_ENTRY_OFFSET;\
+ register u32 new_value = (value);\
+ _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32);\
+ __raw_writel(new_value, (base_address)+offset);\
+}
+
+#endif /* USE_LEVEL_1_MACROS */
+
+#endif /* _MMU_REG_ACM_H */
--- /dev/null
+/*
+ * hw_defs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global HW definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_DEFS_H
+#define _HW_DEFS_H
+
+/* Page size */
+#define HW_PAGE_SIZE4KB 0x1000
+#define HW_PAGE_SIZE64KB 0x10000
+#define HW_PAGE_SIZE1MB 0x100000
+#define HW_PAGE_SIZE16MB 0x1000000
+
+/* hw_status: return type for HW API */
+typedef long hw_status;
+
+/* Macro used to set and clear any bit */
+#define HW_CLEAR 0
+#define HW_SET 1
+
+/* hw_endianism_t: Enumerated Type used to specify the endianism
+ * Do NOT change these values. They are used as bit fields. */
+enum hw_endianism_t {
+ HW_LITTLE_ENDIAN,
+ HW_BIG_ENDIAN
+};
+
+/* hw_element_size_t: Enumerated Type used to specify the element size
+ * Do NOT change these values. They are used as bit fields. */
+enum hw_element_size_t {
+ HW_ELEM_SIZE8BIT,
+ HW_ELEM_SIZE16BIT,
+ HW_ELEM_SIZE32BIT,
+ HW_ELEM_SIZE64BIT
+};
+
+/* hw_idle_mode_t: Enumerated Type used to specify Idle modes */
+enum hw_idle_mode_t {
+ HW_FORCE_IDLE,
+ HW_NO_IDLE,
+ HW_SMART_IDLE
+};
+
+#endif /* _HW_DEFS_H */
--- /dev/null
+/*
+ * hw_mmu.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * API definitions to setup MMU TLB and PTE
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/io.h>
+#include "MMURegAcM.h"
+#include <hw_defs.h>
+#include <hw_mmu.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#define MMU_BASE_VAL_MASK 0xFC00
+#define MMU_PAGE_MAX 3
+#define MMU_ELEMENTSIZE_MAX 3
+#define MMU_ADDR_MASK 0xFFFFF000
+#define MMU_TTB_MASK 0xFFFFC000
+#define MMU_SECTION_ADDR_MASK 0xFFF00000
+#define MMU_SSECTION_ADDR_MASK 0xFF000000
+#define MMU_PAGE_TABLE_MASK 0xFFFFFC00
+#define MMU_LARGE_PAGE_MASK 0xFFFF0000
+#define MMU_SMALL_PAGE_MASK 0xFFFFF000
+
+#define MMU_LOAD_TLB 0x00000001
+#define MMU_GFLUSH 0x60
+
+/*
+ * hw_mmu_page_size_t: Enumerated Type used to specify the MMU Page Size(SLSS)
+ */
+enum hw_mmu_page_size_t {
+ HW_MMU_SECTION,
+ HW_MMU_LARGE_PAGE,
+ HW_MMU_SMALL_PAGE,
+ HW_MMU_SUPERSECTION
+};
+
+/*
+ * FUNCTION : mmu_flush_entry
+ *
+ * INPUTS:
+ *
+ * Identifier : base_address
+ * Type : const u32
+ * Description : Base Address of instance of MMU module
+ *
+ * RETURNS:
+ *
+ * Type : hw_status
+ * Description : 0 -- No errors occured
+ * RET_BAD_NULL_PARAM -- A Pointer
+ * Paramater was set to NULL
+ *
+ * PURPOSE: : Flush the TLB entry pointed by the
+ * lock counter register
+ * even if this entry is set protected
+ *
+ * METHOD: : Check the Input parameter and Flush a
+ * single entry in the TLB.
+ */
+static hw_status mmu_flush_entry(const void __iomem *base_address);
+
+/*
+ * FUNCTION : mmu_set_cam_entry
+ *
+ * INPUTS:
+ *
+ * Identifier : base_address
+ * TypE : const u32
+ * Description : Base Address of instance of MMU module
+ *
+ * Identifier : page_sz
+ * TypE : const u32
+ * Description : It indicates the page size
+ *
+ * Identifier : preserved_bit
+ * Type : const u32
+ * Description : It indicates the TLB entry is preserved entry
+ * or not
+ *
+ * Identifier : valid_bit
+ * Type : const u32
+ * Description : It indicates the TLB entry is valid entry or not
+ *
+ *
+ * Identifier : virtual_addr_tag
+ * Type : const u32
+ * Description : virtual Address
+ *
+ * RETURNS:
+ *
+ * Type : hw_status
+ * Description : 0 -- No errors occured
+ * RET_BAD_NULL_PARAM -- A Pointer Paramater
+ * was set to NULL
+ * RET_PARAM_OUT_OF_RANGE -- Input Parameter out
+ * of Range
+ *
+ * PURPOSE: : Set MMU_CAM reg
+ *
+ * METHOD: : Check the Input parameters and set the CAM entry.
+ */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+ const u32 page_sz,
+ const u32 preserved_bit,
+ const u32 valid_bit,
+ const u32 virtual_addr_tag);
+
+/*
+ * FUNCTION : mmu_set_ram_entry
+ *
+ * INPUTS:
+ *
+ * Identifier : base_address
+ * Type : const u32
+ * Description : Base Address of instance of MMU module
+ *
+ * Identifier : physical_addr
+ * Type : const u32
+ * Description : Physical Address to which the corresponding
+ * virtual Address shouldpoint
+ *
+ * Identifier : endianism
+ * Type : hw_endianism_t
+ * Description : endianism for the given page
+ *
+ * Identifier : element_size
+ * Type : hw_element_size_t
+ * Description : The element size ( 8,16, 32 or 64 bit)
+ *
+ * Identifier : mixed_size
+ * Type : hw_mmu_mixed_size_t
+ * Description : Element Size to follow CPU or TLB
+ *
+ * RETURNS:
+ *
+ * Type : hw_status
+ * Description : 0 -- No errors occured
+ * RET_BAD_NULL_PARAM -- A Pointer Paramater
+ * was set to NULL
+ * RET_PARAM_OUT_OF_RANGE -- Input Parameter
+ * out of Range
+ *
+ * PURPOSE: : Set MMU_CAM reg
+ *
+ * METHOD: : Check the Input parameters and set the RAM entry.
+ */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+ const u32 physical_addr,
+ enum hw_endianism_t endianism,
+ enum hw_element_size_t element_size,
+ enum hw_mmu_mixed_size_t mixed_size);
+
+/* HW FUNCTIONS */
+
+hw_status hw_mmu_enable(const void __iomem *base_address)
+{
+ hw_status status = 0;
+
+ MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_SET);
+
+ return status;
+}
+
+hw_status hw_mmu_disable(const void __iomem *base_address)
+{
+ hw_status status = 0;
+
+ MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+ return status;
+}
+
+hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+ u32 num_locked_entries)
+{
+ hw_status status = 0;
+
+ MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, num_locked_entries);
+
+ return status;
+}
+
+hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+ u32 victim_entry_num)
+{
+ hw_status status = 0;
+
+ MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, victim_entry_num);
+
+ return status;
+}
+
+hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+{
+ hw_status status = 0;
+
+ MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, irq_mask);
+
+ return status;
+}
+
+hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+{
+ hw_status status = 0;
+ u32 irq_reg;
+
+ irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+ MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg & ~irq_mask);
+
+ return status;
+}
+
+hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+{
+ hw_status status = 0;
+ u32 irq_reg;
+
+ irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+ MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg | irq_mask);
+
+ return status;
+}
+
+hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+{
+ hw_status status = 0;
+
+ *irq_mask = MMUMMU_IRQSTATUS_READ_REGISTER32(base_address);
+
+ return status;
+}
+
+hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+{
+ hw_status status = 0;
+
+ /* read values from register */
+ *addr = MMUMMU_FAULT_AD_READ_REGISTER32(base_address);
+
+ return status;
+}
+
+hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+{
+ hw_status status = 0;
+ u32 load_ttb;
+
+ load_ttb = ttb_phys_addr & ~0x7FUL;
+ /* write values to register */
+ MMUMMU_TTB_WRITE_REGISTER32(base_address, load_ttb);
+
+ return status;
+}
+
+hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+{
+ hw_status status = 0;
+
+ MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_SET);
+
+ return status;
+}
+
+hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+{
+ hw_status status = 0;
+
+ MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+ return status;
+}
+
+hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
+ u32 page_sz)
+{
+ hw_status status = 0;
+ u32 virtual_addr_tag;
+ enum hw_mmu_page_size_t pg_size_bits;
+
+ switch (page_sz) {
+ case HW_PAGE_SIZE4KB:
+ pg_size_bits = HW_MMU_SMALL_PAGE;
+ break;
+
+ case HW_PAGE_SIZE64KB:
+ pg_size_bits = HW_MMU_LARGE_PAGE;
+ break;
+
+ case HW_PAGE_SIZE1MB:
+ pg_size_bits = HW_MMU_SECTION;
+ break;
+
+ case HW_PAGE_SIZE16MB:
+ pg_size_bits = HW_MMU_SUPERSECTION;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Generate the 20-bit tag from virtual address */
+ virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+ mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
+
+ mmu_flush_entry(base_address);
+
+ return status;
+}
+
+hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+ u32 physical_addr,
+ u32 virtual_addr,
+ u32 page_sz,
+ u32 entry_num,
+ struct hw_mmu_map_attrs_t *map_attrs,
+ s8 preserved_bit, s8 valid_bit)
+{
+ hw_status status = 0;
+ u32 lock_reg;
+ u32 virtual_addr_tag;
+ enum hw_mmu_page_size_t mmu_pg_size;
+
+ /*Check the input Parameters */
+ switch (page_sz) {
+ case HW_PAGE_SIZE4KB:
+ mmu_pg_size = HW_MMU_SMALL_PAGE;
+ break;
+
+ case HW_PAGE_SIZE64KB:
+ mmu_pg_size = HW_MMU_LARGE_PAGE;
+ break;
+
+ case HW_PAGE_SIZE1MB:
+ mmu_pg_size = HW_MMU_SECTION;
+ break;
+
+ case HW_PAGE_SIZE16MB:
+ mmu_pg_size = HW_MMU_SUPERSECTION;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ lock_reg = MMUMMU_LOCK_READ_REGISTER32(base_address);
+
+ /* Generate the 20-bit tag from virtual address */
+ virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+ /* Write the fields in the CAM Entry Register */
+ mmu_set_cam_entry(base_address, mmu_pg_size, preserved_bit, valid_bit,
+ virtual_addr_tag);
+
+ /* Write the different fields of the RAM Entry Register */
+ /* endianism of the page,Element Size of the page (8, 16, 32, 64 bit) */
+ mmu_set_ram_entry(base_address, physical_addr, map_attrs->endianism,
+ map_attrs->element_size, map_attrs->mixed_size);
+
+ /* Update the MMU Lock Register */
+ /* currentVictim between lockedBaseValue and (MMU_Entries_Number - 1) */
+ MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, entry_num);
+
+ /* Enable loading of an entry in TLB by writing 1
+ into LD_TLB_REG register */
+ MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, MMU_LOAD_TLB);
+
+ MMUMMU_LOCK_WRITE_REGISTER32(base_address, lock_reg);
+
+ return status;
+}
+
+hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+ u32 physical_addr,
+ u32 virtual_addr,
+ u32 page_sz, struct hw_mmu_map_attrs_t *map_attrs)
+{
+ hw_status status = 0;
+ u32 pte_addr, pte_val;
+ s32 num_entries = 1;
+
+ switch (page_sz) {
+ case HW_PAGE_SIZE4KB:
+ pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+ virtual_addr &
+ MMU_SMALL_PAGE_MASK);
+ pte_val =
+ ((physical_addr & MMU_SMALL_PAGE_MASK) |
+ (map_attrs->endianism << 9) | (map_attrs->
+ element_size << 4) |
+ (map_attrs->mixed_size << 11) | 2);
+ break;
+
+ case HW_PAGE_SIZE64KB:
+ num_entries = 16;
+ pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+ virtual_addr &
+ MMU_LARGE_PAGE_MASK);
+ pte_val =
+ ((physical_addr & MMU_LARGE_PAGE_MASK) |
+ (map_attrs->endianism << 9) | (map_attrs->
+ element_size << 4) |
+ (map_attrs->mixed_size << 11) | 1);
+ break;
+
+ case HW_PAGE_SIZE1MB:
+ pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+ virtual_addr &
+ MMU_SECTION_ADDR_MASK);
+ pte_val =
+ ((((physical_addr & MMU_SECTION_ADDR_MASK) |
+ (map_attrs->endianism << 15) | (map_attrs->
+ element_size << 10) |
+ (map_attrs->mixed_size << 17)) & ~0x40000) | 0x2);
+ break;
+
+ case HW_PAGE_SIZE16MB:
+ num_entries = 16;
+ pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+ virtual_addr &
+ MMU_SSECTION_ADDR_MASK);
+ pte_val =
+ (((physical_addr & MMU_SSECTION_ADDR_MASK) |
+ (map_attrs->endianism << 15) | (map_attrs->
+ element_size << 10) |
+ (map_attrs->mixed_size << 17)
+ ) | 0x40000 | 0x2);
+ break;
+
+ case HW_MMU_COARSE_PAGE_SIZE:
+ pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+ virtual_addr &
+ MMU_SECTION_ADDR_MASK);
+ pte_val = (physical_addr & MMU_PAGE_TABLE_MASK) | 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (--num_entries >= 0)
+ ((u32 *) pte_addr)[num_entries] = pte_val;
+
+ return status;
+}
+
+hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size)
+{
+ hw_status status = 0;
+ u32 pte_addr;
+ s32 num_entries = 1;
+
+ switch (page_size) {
+ case HW_PAGE_SIZE4KB:
+ pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+ virtual_addr &
+ MMU_SMALL_PAGE_MASK);
+ break;
+
+ case HW_PAGE_SIZE64KB:
+ num_entries = 16;
+ pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+ virtual_addr &
+ MMU_LARGE_PAGE_MASK);
+ break;
+
+ case HW_PAGE_SIZE1MB:
+ case HW_MMU_COARSE_PAGE_SIZE:
+ pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+ virtual_addr &
+ MMU_SECTION_ADDR_MASK);
+ break;
+
+ case HW_PAGE_SIZE16MB:
+ num_entries = 16;
+ pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+ virtual_addr &
+ MMU_SSECTION_ADDR_MASK);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (--num_entries >= 0)
+ ((u32 *) pte_addr)[num_entries] = 0;
+
+ return status;
+}
+
+/* mmu_flush_entry */
+static hw_status mmu_flush_entry(const void __iomem *base_address)
+{
+ hw_status status = 0;
+ u32 flush_entry_data = 0x1;
+
+ /* write values to register */
+ MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
+
+ return status;
+}
+
+/* mmu_set_cam_entry */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+ const u32 page_sz,
+ const u32 preserved_bit,
+ const u32 valid_bit,
+ const u32 virtual_addr_tag)
+{
+ hw_status status = 0;
+ u32 mmu_cam_reg;
+
+ mmu_cam_reg = (virtual_addr_tag << 12);
+ mmu_cam_reg = (mmu_cam_reg) | (page_sz) | (valid_bit << 2) |
+ (preserved_bit << 3);
+
+ /* write values to register */
+ MMUMMU_CAM_WRITE_REGISTER32(base_address, mmu_cam_reg);
+
+ return status;
+}
+
+/* mmu_set_ram_entry */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+ const u32 physical_addr,
+ enum hw_endianism_t endianism,
+ enum hw_element_size_t element_size,
+ enum hw_mmu_mixed_size_t mixed_size)
+{
+ hw_status status = 0;
+ u32 mmu_ram_reg;
+
+ mmu_ram_reg = (physical_addr & MMU_ADDR_MASK);
+ mmu_ram_reg = (mmu_ram_reg) | ((endianism << 9) | (element_size << 7) |
+ (mixed_size << 6));
+
+ /* write values to register */
+ MMUMMU_RAM_WRITE_REGISTER32(base_address, mmu_ram_reg);
+
+ return status;
+
+}
+
+void hw_mmu_tlb_flush_all(const void __iomem *base)
+{
+ __raw_writeb(1, base + MMU_GFLUSH);
+}
--- /dev/null
+/*
+ * hw_mmu.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * MMU types and API declarations
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_MMU_H
+#define _HW_MMU_H
+
+#include <linux/types.h>
+
+/* Bitmasks for interrupt sources */
+#define HW_MMU_TRANSLATION_FAULT 0x2
+#define HW_MMU_ALL_INTERRUPTS 0x1F
+
+#define HW_MMU_COARSE_PAGE_SIZE 0x400
+
+/* hw_mmu_mixed_size_t: Enumerated Type used to specify whether to follow
+ CPU/TLB Element size */
+enum hw_mmu_mixed_size_t {
+ HW_MMU_TLBES,
+ HW_MMU_CPUES
+};
+
+/* hw_mmu_map_attrs_t: Struct containing MMU mapping attributes */
+struct hw_mmu_map_attrs_t {
+ enum hw_endianism_t endianism;
+ enum hw_element_size_t element_size;
+ enum hw_mmu_mixed_size_t mixed_size;
+ bool donotlockmpupage;
+};
+
+extern hw_status hw_mmu_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+ u32 num_locked_entries);
+
+extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+ u32 victim_entry_num);
+
+/* For MMU faults */
+extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+ u32 irq_mask);
+
+extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+ u32 irq_mask);
+
+extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+ u32 irq_mask);
+
+extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+ u32 *irq_mask);
+
+extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+ u32 *addr);
+
+/* Set the TT base address */
+extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+ u32 ttb_phys_addr);
+
+extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
+ u32 virtual_addr, u32 page_sz);
+
+extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+ u32 physical_addr,
+ u32 virtual_addr,
+ u32 page_sz,
+ u32 entry_num,
+ struct hw_mmu_map_attrs_t *map_attrs,
+ s8 preserved_bit, s8 valid_bit);
+
+/* For PTEs */
+extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+ u32 physical_addr,
+ u32 virtual_addr,
+ u32 page_sz,
+ struct hw_mmu_map_attrs_t *map_attrs);
+
+extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
+ u32 virtual_addr, u32 page_size);
+
+void hw_mmu_tlb_flush_all(const void __iomem *base);
+
+static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
+{
+ u32 pte_addr;
+ u32 va31_to20;
+
+ va31_to20 = va >> (20 - 2); /* Left-shift by 2 here itself */
+ va31_to20 &= 0xFFFFFFFCUL;
+ pte_addr = l1_base + va31_to20;
+
+ return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_addr_l2(u32 l2_base, u32 va)
+{
+ u32 pte_addr;
+
+ pte_addr = (l2_base & 0xFFFFFC00) | ((va >> 10) & 0x3FC);
+
+ return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_coarse_l1(u32 pte_val)
+{
+ u32 pte_coarse;
+
+ pte_coarse = pte_val & 0xFFFFFC00;
+
+ return pte_coarse;
+}
+
+static inline u32 hw_mmu_pte_size_l1(u32 pte_val)
+{
+ u32 pte_size = 0;
+
+ if ((pte_val & 0x3) == 0x1) {
+ /* Points to L2 PT */
+ pte_size = HW_MMU_COARSE_PAGE_SIZE;
+ }
+
+ if ((pte_val & 0x3) == 0x2) {
+ if (pte_val & (1 << 18))
+ pte_size = HW_PAGE_SIZE16MB;
+ else
+ pte_size = HW_PAGE_SIZE1MB;
+ }
+
+ return pte_size;
+}
+
+static inline u32 hw_mmu_pte_size_l2(u32 pte_val)
+{
+ u32 pte_size = 0;
+
+ if (pte_val & 0x2)
+ pte_size = HW_PAGE_SIZE4KB;
+ else if (pte_val & 0x1)
+ pte_size = HW_PAGE_SIZE64KB;
+
+ return pte_size;
+}
+
+#endif /* _HW_MMU_H */
void __iomem *dw_per_base;
u32 dw_per_pm_base;
u32 dw_core_pm_base;
+ void __iomem *dw_dmmu_base;
void __iomem *dw_sys_ctrl_base;
};
#include <dspbridge/nodedefs.h>
#include <dspbridge/dispdefs.h>
#include <dspbridge/dspdefs.h>
+#include <dspbridge/dmm.h>
#include <dspbridge/host_os.h>
/* ----------------------------------- This */
extern int dev_get_cmm_mgr(struct dev_object *hdev_obj,
struct cmm_object **mgr);
+/*
+ * ======== dev_get_dmm_mgr ========
+ * Purpose:
+ * Retrieve the handle to the dynamic memory manager created for this
+ * device.
+ * Parameters:
+ * hdev_obj: Handle to device object created with
+ * dev_create_device().
+ * *mgr: Ptr to location to store handle.
+ * Returns:
+ * 0: Success.
+ * -EFAULT: Invalid hdev_obj.
+ * Requires:
+ * mgr != NULL.
+ * DEV Initialized.
+ * Ensures:
+ * 0: *mgr contains a handle to a channel manager object,
+ * or NULL.
+ * else: *mgr is NULL.
+ */
+extern int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+ struct dmm_object **mgr);
+
/*
* ======== dev_get_cod_mgr ========
* Purpose:
--- /dev/null
+/*
+ * dmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Mapping(DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DMM_
+#define DMM_
+
+#include <dspbridge/dbdefs.h>
+
+struct dmm_object;
+
+/* DMM attributes used in dmm_create() */
+struct dmm_mgrattrs {
+ u32 reserved;
+};
+
+#define DMMPOOLSIZE 0x4000000
+
+/*
+ * ======== dmm_get_handle ========
+ * Purpose:
+ * Return the dynamic memory manager object for this device.
+ * This is typically called from the client process.
+ */
+
+extern int dmm_get_handle(void *hprocessor,
+ struct dmm_object **dmm_manager);
+
+extern int dmm_reserve_memory(struct dmm_object *dmm_mgr,
+ u32 size, u32 *prsv_addr);
+
+extern int dmm_un_reserve_memory(struct dmm_object *dmm_mgr,
+ u32 rsv_addr);
+
+extern int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr,
+ u32 size);
+
+extern int dmm_un_map_memory(struct dmm_object *dmm_mgr,
+ u32 addr, u32 *psize);
+
+extern int dmm_destroy(struct dmm_object *dmm_mgr);
+
+extern int dmm_delete_tables(struct dmm_object *dmm_mgr);
+
+extern int dmm_create(struct dmm_object **dmm_manager,
+ struct dev_object *hdev_obj,
+ const struct dmm_mgrattrs *mgr_attrts);
+
+extern bool dmm_init(void);
+
+extern void dmm_exit(void);
+
+extern int dmm_create_tables(struct dmm_object *dmm_mgr,
+ u32 addr, u32 size);
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr);
+#endif
+
+#endif /* DMM_ */
struct bridge_dma_map_info dma_info;
};
+/* Used for DMM reserved memory accounting */
+struct dmm_rsv_object {
+ struct list_head link;
+ u32 dsp_reserved_addr;
+};
+
/* New structure (member of process context) abstracts DMM resource info */
struct dspheap_res_object {
s32 heap_allocated; /* DMM status */
struct list_head dmm_map_list;
spinlock_t dmm_map_lock;
+ /* DMM reserved memory resources */
+ struct list_head dmm_rsv_list;
+ spinlock_t dmm_rsv_lock;
+
/* DSP Heap resources */
struct dspheap_res_object *pdspheap_list;
+++ /dev/null
-/*
- * dsp-mmu.h
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2005-2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _DSP_MMU_
-#define _DSP_MMU_
-
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init(void);
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu: Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu);
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu: Pointer to iommu handle.
- * @uva: Virtual user space address.
- * @da DSP address
- * @size Buffer size to map.
- * @usr_pgs struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
- struct page **usr_pgs);
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu: Pointer to iommu handle.
- * @da DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da);
-
-#endif
u32 dsp_addr, u32 ul_num_bytes,
u32 mem_type);
+/*
+ * ======== bridge_brd_mem_map ========
+ * Purpose:
+ * Map a MPU memory region to a DSP/IVA memory space
+ * Parameters:
+ * dev_ctxt: Handle to Bridge driver defined device info.
+ * ul_mpu_addr: MPU memory region start address.
+ * virt_addr: DSP/IVA memory region u8 address.
+ * ul_num_bytes: Number of bytes to map.
+ * map_attrs: Mapping attributes (e.g. endianness).
+ * Returns:
+ * 0: Success.
+ * -EPERM: Other, unspecified error.
+ * Requires:
+ * dev_ctxt != NULL;
+ * Ensures:
+ */
+typedef int(*fxn_brd_memmap) (struct bridge_dev_context
+ * dev_ctxt, u32 ul_mpu_addr,
+ u32 virt_addr, u32 ul_num_bytes,
+ u32 map_attr,
+ struct page **mapped_pages);
+
+/*
+ * ======== bridge_brd_mem_un_map ========
+ * Purpose:
+ * UnMap an MPU memory region from DSP/IVA memory space
+ * Parameters:
+ * dev_ctxt: Handle to Bridge driver defined device info.
+ * virt_addr: DSP/IVA memory region u8 address.
+ * ul_num_bytes: Number of bytes to unmap.
+ * Returns:
+ * 0: Success.
+ * -EPERM: Other, unspecified error.
+ * Requires:
+ * dev_ctxt != NULL;
+ * Ensures:
+ */
+typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
+ * dev_ctxt,
+ u32 virt_addr, u32 ul_num_bytes);
+
/*
* ======== bridge_brd_stop ========
* Purpose:
fxn_brd_setstate pfn_brd_set_state; /* Sets the Board State */
fxn_brd_memcopy pfn_brd_mem_copy; /* Copies DSP Memory */
fxn_brd_memwrite pfn_brd_mem_write; /* Write DSP Memory w/o halt */
+ fxn_brd_memmap pfn_brd_mem_map; /* Maps MPU mem to DSP mem */
+ fxn_brd_memunmap pfn_brd_mem_un_map; /* Unmaps MPU mem to DSP mem */
fxn_chnl_create pfn_chnl_create; /* Create channel manager. */
fxn_chnl_destroy pfn_chnl_destroy; /* Destroy channel manager. */
fxn_chnl_open pfn_chnl_open; /* Create a new channel. */
#ifndef DSPIOCTL_
#define DSPIOCTL_
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
/*
* Any IOCTLS at or above this value are reserved for standard Bridge driver
* interfaces.
/* GPP virtual address. __va does not work for ioremapped addresses */
u32 ul_gpp_va;
u32 ul_size; /* Size of the mapped memory in bytes */
+ enum hw_endianism_t endianism;
+ enum hw_mmu_mixed_size_t mixed_mode;
+ enum hw_element_size_t elem_size;
};
#endif /* DSPIOCTL_ */
void **pp_map_addr, u32 ul_map_attr,
struct process_context *pr_ctxt);
+/*
+ * ======== proc_reserve_memory ========
+ * Purpose:
+ * Reserve a virtually contiguous region of DSP address space.
+ * Parameters:
+ * hprocessor : The processor handle.
+ * ul_size : Size of the address space to reserve.
+ * pp_rsv_addr : Ptr to DSP side reserved u8 address.
+ * Returns:
+ * 0 : Success.
+ * -EFAULT : Invalid processor handle.
+ * -EPERM : General failure.
+ * -ENOMEM : Cannot reserve chunk of this size.
+ * Requires:
+ * pp_rsv_addr is not NULL
+ * PROC Initialized.
+ * Ensures:
+ * Details:
+ */
+extern int proc_reserve_memory(void *hprocessor,
+ u32 ul_size, void **pp_rsv_addr,
+ struct process_context *pr_ctxt);
+
/*
* ======== proc_un_map ========
* Purpose:
extern int proc_un_map(void *hprocessor, void *map_addr,
struct process_context *pr_ctxt);
+/*
+ * ======== proc_un_reserve_memory ========
+ * Purpose:
+ * Frees a previously reserved region of DSP address space.
+ * Parameters:
+ * hprocessor : The processor handle.
+ * prsv_addr : Ptr to DSP side reservedBYTE address.
+ * Returns:
+ * 0 : Success.
+ * -EFAULT : Invalid processor handle.
+ * -EPERM : General failure.
+ * -ENOENT : Cannot find a reserved region starting with this
+ * : address.
+ * Requires:
+ * prsv_addr is not NULL
+ * PROC Initialized.
+ * Ensures:
+ * Details:
+ */
+extern int proc_un_reserve_memory(void *hprocessor,
+ void *prsv_addr,
+ struct process_context *pr_ctxt);
+
#endif /* PROC_ */
#include <dspbridge/cod.h>
#include <dspbridge/drv.h>
#include <dspbridge/proc.h>
+#include <dspbridge/dmm.h>
/* ----------------------------------- Resource Manager */
#include <dspbridge/mgr.h>
struct msg_mgr *hmsg_mgr; /* Message manager. */
struct io_mgr *hio_mgr; /* IO manager (CHNL, msg_ctrl) */
struct cmm_object *hcmm_mgr; /* SM memory manager. */
+ struct dmm_object *dmm_mgr; /* Dynamic memory manager. */
struct ldr_module *module_obj; /* Bridge Module handle. */
u32 word_size; /* DSP word size: quick access. */
struct drv_object *hdrv_obj; /* Driver Object */
/* Instantiate the DEH module */
status = bridge_deh_create(&dev_obj->hdeh_mgr, dev_obj);
}
+ /* Create DMM mgr . */
+ status = dmm_create(&dev_obj->dmm_mgr,
+ (struct dev_object *)dev_obj, NULL);
}
/* Add the new DEV_Object to the global list: */
if (!status) {
kfree(dev_obj->proc_list);
if (dev_obj->cod_mgr)
cod_delete(dev_obj->cod_mgr);
+ if (dev_obj->dmm_mgr)
+ dmm_destroy(dev_obj->dmm_mgr);
kfree(dev_obj);
}
dev_obj->hcmm_mgr = NULL;
}
+ if (dev_obj->dmm_mgr) {
+ dmm_destroy(dev_obj->dmm_mgr);
+ dev_obj->dmm_mgr = NULL;
+ }
+
/* Call the driver's bridge_dev_destroy() function: */
/* Require of DevDestroy */
if (dev_obj->hbridge_context) {
return status;
}
+/*
+ * ======== dev_get_dmm_mgr ========
+ * Purpose:
+ * Retrieve the handle to the dynamic memory manager created for this
+ * device.
+ */
+int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+ struct dmm_object **mgr)
+{
+ int status = 0;
+ struct dev_object *dev_obj = hdev_obj;
+
+ DBC_REQUIRE(refs > 0);
+ DBC_REQUIRE(mgr != NULL);
+
+ if (hdev_obj) {
+ *mgr = dev_obj->dmm_mgr;
+ } else {
+ *mgr = NULL;
+ status = -EFAULT;
+ }
+
+ DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+ return status;
+}
+
/*
* ======== dev_get_cod_mgr ========
* Purpose:
refs--;
- if (refs == 0)
+ if (refs == 0) {
cmm_exit();
+ dmm_exit();
+ }
DBC_ENSURE(refs >= 0);
}
*/
bool dev_init(void)
{
- bool ret = true;
+ bool cmm_ret, dmm_ret, ret = true;
DBC_REQUIRE(refs >= 0);
- if (refs == 0)
- ret = cmm_init();
+ if (refs == 0) {
+ cmm_ret = cmm_init();
+ dmm_ret = dmm_init();
+
+ ret = cmm_ret && dmm_ret;
+
+ if (!ret) {
+ if (cmm_ret)
+ cmm_exit();
+
+ if (dmm_ret)
+ dmm_exit();
+
+ }
+ }
if (ret)
refs++;
STORE_FXN(fxn_brd_setstate, pfn_brd_set_state);
STORE_FXN(fxn_brd_memcopy, pfn_brd_mem_copy);
STORE_FXN(fxn_brd_memwrite, pfn_brd_mem_write);
+ STORE_FXN(fxn_brd_memmap, pfn_brd_mem_map);
+ STORE_FXN(fxn_brd_memunmap, pfn_brd_mem_un_map);
STORE_FXN(fxn_chnl_create, pfn_chnl_create);
STORE_FXN(fxn_chnl_destroy, pfn_chnl_destroy);
STORE_FXN(fxn_chnl_open, pfn_chnl_open);
--- /dev/null
+/*
+ * dmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Manager (DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region
+ *
+ * Notes:
+ * Region: Generic memory entitiy having a start address and a size
+ * Chunk: Reserved region
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/* ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/* ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/* ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/* ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/* ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/proc.h>
+
+/* ----------------------------------- This */
+#include <dspbridge/dmm.h>
+
+/* ----------------------------------- Defines, Data Structures, Typedefs */
+#define DMM_ADDR_VIRTUAL(a) \
+ (((struct map_page *)(a) - virtual_mapping_table) * PG_SIZE4K +\
+ dyn_mem_map_beg)
+#define DMM_ADDR_TO_INDEX(a) (((a) - dyn_mem_map_beg) / PG_SIZE4K)
+
+/* DMM Mgr */
+struct dmm_object {
+ /* Dmm Lock is used to serialize access mem manager for
+ * multi-threads. */
+ spinlock_t dmm_lock; /* Lock to access dmm mgr */
+};
+
+/* ----------------------------------- Globals */
+static u32 refs; /* module reference count */
+struct map_page {
+ u32 region_size:15;
+ u32 mapped_size:15;
+ u32 reserved:1;
+ u32 mapped:1;
+};
+
+/* Create the free list */
+static struct map_page *virtual_mapping_table;
+static u32 free_region; /* The index of free region */
+static u32 free_size;
+static u32 dyn_mem_map_beg; /* The Beginning of dynamic memory mapping */
+static u32 table_size; /* The size of virt and phys pages tables */
+
+/* ----------------------------------- Function Prototypes */
+static struct map_page *get_region(u32 addr);
+static struct map_page *get_free_region(u32 len);
+static struct map_page *get_mapped_region(u32 addrs);
+
+/* ======== dmm_create_tables ========
+ * Purpose:
+ * Create table to hold the information of physical address
+ * the buffer pages that is passed by the user, and the table
+ * to hold the information of the virtual memory that is reserved
+ * for DSP.
+ */
+int dmm_create_tables(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ int status = 0;
+
+ status = dmm_delete_tables(dmm_obj);
+ if (!status) {
+ dyn_mem_map_beg = addr;
+ table_size = PG_ALIGN_HIGH(size, PG_SIZE4K) / PG_SIZE4K;
+ /* Create the free list */
+ virtual_mapping_table = __vmalloc(table_size *
+ sizeof(struct map_page), GFP_KERNEL |
+ __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+ if (virtual_mapping_table == NULL)
+ status = -ENOMEM;
+ else {
+ /* On successful allocation,
+ * all entries are zero ('free') */
+ free_region = 0;
+ free_size = table_size * PG_SIZE4K;
+ virtual_mapping_table[0].region_size = table_size;
+ }
+ }
+
+ if (status)
+ pr_err("%s: failure, status 0x%x\n", __func__, status);
+
+ return status;
+}
+
+/*
+ * ======== dmm_create ========
+ * Purpose:
+ * Create a dynamic memory manager object.
+ */
+int dmm_create(struct dmm_object **dmm_manager,
+ struct dev_object *hdev_obj,
+ const struct dmm_mgrattrs *mgr_attrts)
+{
+ struct dmm_object *dmm_obj = NULL;
+ int status = 0;
+ DBC_REQUIRE(refs > 0);
+ DBC_REQUIRE(dmm_manager != NULL);
+
+ *dmm_manager = NULL;
+ /* create, zero, and tag a cmm mgr object */
+ dmm_obj = kzalloc(sizeof(struct dmm_object), GFP_KERNEL);
+ if (dmm_obj != NULL) {
+ spin_lock_init(&dmm_obj->dmm_lock);
+ *dmm_manager = dmm_obj;
+ } else {
+ status = -ENOMEM;
+ }
+
+ return status;
+}
+
+/*
+ * ======== dmm_destroy ========
+ * Purpose:
+ * Release the communication memory manager resources.
+ */
+int dmm_destroy(struct dmm_object *dmm_mgr)
+{
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ int status = 0;
+
+ DBC_REQUIRE(refs > 0);
+ if (dmm_mgr) {
+ status = dmm_delete_tables(dmm_obj);
+ if (!status)
+ kfree(dmm_obj);
+ } else
+ status = -EFAULT;
+
+ return status;
+}
+
+/*
+ * ======== dmm_delete_tables ========
+ * Purpose:
+ * Delete DMM Tables.
+ */
+int dmm_delete_tables(struct dmm_object *dmm_mgr)
+{
+ int status = 0;
+
+ DBC_REQUIRE(refs > 0);
+ /* Delete all DMM tables */
+ if (dmm_mgr)
+ vfree(virtual_mapping_table);
+ else
+ status = -EFAULT;
+ return status;
+}
+
+/*
+ * ======== dmm_exit ========
+ * Purpose:
+ * Discontinue usage of module; free resources when reference count
+ * reaches 0.
+ */
+void dmm_exit(void)
+{
+ DBC_REQUIRE(refs > 0);
+
+ refs--;
+}
+
+/*
+ * ======== dmm_get_handle ========
+ * Purpose:
+ * Return the dynamic memory manager object for this device.
+ * This is typically called from the client process.
+ */
+int dmm_get_handle(void *hprocessor, struct dmm_object **dmm_manager)
+{
+ int status = 0;
+ struct dev_object *hdev_obj;
+
+ DBC_REQUIRE(refs > 0);
+ DBC_REQUIRE(dmm_manager != NULL);
+ if (hprocessor != NULL)
+ status = proc_get_dev_object(hprocessor, &hdev_obj);
+ else
+ hdev_obj = dev_get_first(); /* default */
+
+ if (!status)
+ status = dev_get_dmm_mgr(hdev_obj, dmm_manager);
+
+ return status;
+}
+
+/*
+ * ======== dmm_init ========
+ * Purpose:
+ * Initializes private state of DMM module.
+ */
+bool dmm_init(void)
+{
+ bool ret = true;
+
+ DBC_REQUIRE(refs >= 0);
+
+ if (ret)
+ refs++;
+
+ DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+ virtual_mapping_table = NULL;
+ table_size = 0;
+
+ return ret;
+}
+
+/*
+ * ======== dmm_map_memory ========
+ * Purpose:
+ * Add a mapping block to the reserved chunk. DMM assumes that this block
+ * will be mapped in the DSP/IVA's address space. DMM returns an error if a
+ * mapping overlaps another one. This function stores the info that will be
+ * required later while unmapping the block.
+ */
+int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ struct map_page *chunk;
+ int status = 0;
+
+ spin_lock(&dmm_obj->dmm_lock);
+ /* Find the Reserved memory chunk containing the DSP block to
+ * be mapped */
+ chunk = (struct map_page *)get_region(addr);
+ if (chunk != NULL) {
+ /* Mark the region 'mapped', leave the 'reserved' info as-is */
+ chunk->mapped = true;
+ chunk->mapped_size = (size / PG_SIZE4K);
+ } else
+ status = -ENOENT;
+ spin_unlock(&dmm_obj->dmm_lock);
+
+ dev_dbg(bridge, "%s dmm_mgr %p, addr %x, size %x\n\tstatus %x, "
+ "chunk %p", __func__, dmm_mgr, addr, size, status, chunk);
+
+ return status;
+}
+
+/*
+ * ======== dmm_reserve_memory ========
+ * Purpose:
+ * Reserve a chunk of virtually contiguous DSP/IVA address space.
+ */
+int dmm_reserve_memory(struct dmm_object *dmm_mgr, u32 size,
+ u32 *prsv_addr)
+{
+ int status = 0;
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ struct map_page *node;
+ u32 rsv_addr = 0;
+ u32 rsv_size = 0;
+
+ spin_lock(&dmm_obj->dmm_lock);
+
+ /* Try to get a DSP chunk from the free list */
+ node = get_free_region(size);
+ if (node != NULL) {
+ /* DSP chunk of given size is available. */
+ rsv_addr = DMM_ADDR_VIRTUAL(node);
+ /* Calculate the number entries to use */
+ rsv_size = size / PG_SIZE4K;
+ if (rsv_size < node->region_size) {
+ /* Mark remainder of free region */
+ node[rsv_size].mapped = false;
+ node[rsv_size].reserved = false;
+ node[rsv_size].region_size =
+ node->region_size - rsv_size;
+ node[rsv_size].mapped_size = 0;
+ }
+ /* get_region will return first fit chunk. But we only use what
+ is requested. */
+ node->mapped = false;
+ node->reserved = true;
+ node->region_size = rsv_size;
+ node->mapped_size = 0;
+ /* Return the chunk's starting address */
+ *prsv_addr = rsv_addr;
+ } else
+ /*dSP chunk of given size is not available */
+ status = -ENOMEM;
+
+ spin_unlock(&dmm_obj->dmm_lock);
+
+ dev_dbg(bridge, "%s dmm_mgr %p, size %x, prsv_addr %p\n\tstatus %x, "
+ "rsv_addr %x, rsv_size %x\n", __func__, dmm_mgr, size,
+ prsv_addr, status, rsv_addr, rsv_size);
+
+ return status;
+}
+
+/*
+ * ======== dmm_un_map_memory ========
+ * Purpose:
+ * Remove the mapped block from the reserved chunk.
+ */
+int dmm_un_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 *psize)
+{
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ struct map_page *chunk;
+ int status = 0;
+
+ spin_lock(&dmm_obj->dmm_lock);
+ chunk = get_mapped_region(addr);
+ if (chunk == NULL)
+ status = -ENOENT;
+
+ if (!status) {
+ /* Unmap the region */
+ *psize = chunk->mapped_size * PG_SIZE4K;
+ chunk->mapped = false;
+ chunk->mapped_size = 0;
+ }
+ spin_unlock(&dmm_obj->dmm_lock);
+
+ dev_dbg(bridge, "%s: dmm_mgr %p, addr %x, psize %p\n\tstatus %x, "
+ "chunk %p\n", __func__, dmm_mgr, addr, psize, status, chunk);
+
+ return status;
+}
+
+/*
+ * ======== dmm_un_reserve_memory ========
+ * Purpose:
+ * Free a chunk of reserved DSP/IVA address space.
+ */
+int dmm_un_reserve_memory(struct dmm_object *dmm_mgr, u32 rsv_addr)
+{
+ struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+ struct map_page *chunk;
+ u32 i;
+ int status = 0;
+ u32 chunk_size;
+
+ spin_lock(&dmm_obj->dmm_lock);
+
+ /* Find the chunk containing the reserved address */
+ chunk = get_mapped_region(rsv_addr);
+ if (chunk == NULL)
+ status = -ENOENT;
+
+ if (!status) {
+ /* Free all the mapped pages for this reserved region */
+ i = 0;
+ while (i < chunk->region_size) {
+ if (chunk[i].mapped) {
+ /* Remove mapping from the page tables. */
+ chunk_size = chunk[i].mapped_size;
+ /* Clear the mapping flags */
+ chunk[i].mapped = false;
+ chunk[i].mapped_size = 0;
+ i += chunk_size;
+ } else
+ i++;
+ }
+ /* Clear the flags (mark the region 'free') */
+ chunk->reserved = false;
+ /* NOTE: We do NOT coalesce free regions here.
+ * Free regions are coalesced in get_region(), as it traverses
+ *the whole mapping table
+ */
+ }
+ spin_unlock(&dmm_obj->dmm_lock);
+
+ dev_dbg(bridge, "%s: dmm_mgr %p, rsv_addr %x\n\tstatus %x chunk %p",
+ __func__, dmm_mgr, rsv_addr, status, chunk);
+
+ return status;
+}
+
+/*
+ * ======== get_region ========
+ * Purpose:
+ * Returns a region containing the specified memory region
+ */
+static struct map_page *get_region(u32 addr)
+{
+ struct map_page *curr_region = NULL;
+ u32 i = 0;
+
+ if (virtual_mapping_table != NULL) {
+ /* find page mapped by this address */
+ i = DMM_ADDR_TO_INDEX(addr);
+ if (i < table_size)
+ curr_region = virtual_mapping_table + i;
+ }
+
+ dev_dbg(bridge, "%s: curr_region %p, free_region %d, free_size %d\n",
+ __func__, curr_region, free_region, free_size);
+ return curr_region;
+}
+
+/*
+ * ======== get_free_region ========
+ * Purpose:
+ * Returns the requested free region
+ */
+static struct map_page *get_free_region(u32 len)
+{
+ struct map_page *curr_region = NULL;
+ u32 i = 0;
+ u32 region_size = 0;
+ u32 next_i = 0;
+
+ if (virtual_mapping_table == NULL)
+ return curr_region;
+ if (len > free_size) {
+ /* Find the largest free region
+ * (coalesce during the traversal) */
+ while (i < table_size) {
+ region_size = virtual_mapping_table[i].region_size;
+ next_i = i + region_size;
+ if (virtual_mapping_table[i].reserved == false) {
+ /* Coalesce, if possible */
+ if (next_i < table_size &&
+ virtual_mapping_table[next_i].reserved
+ == false) {
+ virtual_mapping_table[i].region_size +=
+ virtual_mapping_table
+ [next_i].region_size;
+ continue;
+ }
+ region_size *= PG_SIZE4K;
+ if (region_size > free_size) {
+ free_region = i;
+ free_size = region_size;
+ }
+ }
+ i = next_i;
+ }
+ }
+ if (len <= free_size) {
+ curr_region = virtual_mapping_table + free_region;
+ free_region += (len / PG_SIZE4K);
+ free_size -= len;
+ }
+ return curr_region;
+}
+
+/*
+ * ======== get_mapped_region ========
+ * Purpose:
+ * Returns the requestedmapped region
+ */
+static struct map_page *get_mapped_region(u32 addrs)
+{
+ u32 i = 0;
+ struct map_page *curr_region = NULL;
+
+ if (virtual_mapping_table == NULL)
+ return curr_region;
+
+ i = DMM_ADDR_TO_INDEX(addrs);
+ if (i < table_size && (virtual_mapping_table[i].mapped ||
+ virtual_mapping_table[i].reserved))
+ curr_region = virtual_mapping_table + i;
+ return curr_region;
+}
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr)
+{
+ struct map_page *curr_node = NULL;
+ u32 i;
+ u32 freemem = 0;
+ u32 bigsize = 0;
+
+ spin_lock(&dmm_mgr->dmm_lock);
+
+ if (virtual_mapping_table != NULL) {
+ for (i = 0; i < table_size; i +=
+ virtual_mapping_table[i].region_size) {
+ curr_node = virtual_mapping_table + i;
+ if (curr_node->reserved) {
+ /*printk("RESERVED size = 0x%x, "
+ "Map size = 0x%x\n",
+ (curr_node->region_size * PG_SIZE4K),
+ (curr_node->mapped == false) ? 0 :
+ (curr_node->mapped_size * PG_SIZE4K));
+ */
+ } else {
+/* printk("UNRESERVED size = 0x%x\n",
+ (curr_node->region_size * PG_SIZE4K));
+ */
+ freemem += (curr_node->region_size * PG_SIZE4K);
+ if (curr_node->region_size > bigsize)
+ bigsize = curr_node->region_size;
+ }
+ }
+ }
+ spin_unlock(&dmm_mgr->dmm_lock);
+ printk(KERN_INFO "Total DSP VA FREE memory = %d Mbytes\n",
+ freemem / (1024 * 1024));
+ printk(KERN_INFO "Total DSP VA USED memory= %d Mbytes \n",
+ (((table_size * PG_SIZE4K) - freemem)) / (1024 * 1024));
+ printk(KERN_INFO "DSP VA - Biggest FREE block = %d Mbytes \n\n",
+ (bigsize * PG_SIZE4K / (1024 * 1024)));
+
+ return 0;
+}
+#endif
/*
* ======== procwrap_reserve_memory ========
*/
-u32 __deprecated procwrap_reserve_memory(union trapped_args *args,
- void *pr_ctxt)
+u32 procwrap_reserve_memory(union trapped_args *args, void *pr_ctxt)
{
- return 0;
+ int status;
+ void *prsv_addr;
+ void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+ if ((args->args_proc_rsvmem.ul_size <= 0) ||
+ (args->args_proc_rsvmem.ul_size & (PG_SIZE4K - 1)) != 0)
+ return -EINVAL;
+
+ status = proc_reserve_memory(hprocessor,
+ args->args_proc_rsvmem.ul_size, &prsv_addr,
+ pr_ctxt);
+ if (!status) {
+ if (put_user(prsv_addr, args->args_proc_rsvmem.pp_rsv_addr)) {
+ status = -EINVAL;
+ proc_un_reserve_memory(args->args_proc_rsvmem.
+ hprocessor, prsv_addr, pr_ctxt);
+ }
+ }
+ return status;
}
/*
/*
* ======== procwrap_un_reserve_memory ========
*/
-u32 __deprecated procwrap_un_reserve_memory(union trapped_args *args,
- void *pr_ctxt)
+u32 procwrap_un_reserve_memory(union trapped_args *args, void *pr_ctxt)
{
- return 0;
+ int status;
+ void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+ status = proc_un_reserve_memory(hprocessor,
+ args->args_proc_unrsvmem.prsv_addr,
+ pr_ctxt);
+ return status;
}
/*
struct process_context *ctxt = (struct process_context *)process_ctxt;
int status = 0;
struct dmm_map_object *temp_map, *map_obj;
+ struct dmm_rsv_object *temp_rsv, *rsv_obj;
/* Free DMM mapped memory resources */
list_for_each_entry_safe(map_obj, temp_map, &ctxt->dmm_map_list, link) {
pr_err("%s: proc_un_map failed!"
" status = 0x%xn", __func__, status);
}
+
+ /* Free DMM reserved memory resources */
+ list_for_each_entry_safe(rsv_obj, temp_rsv, &ctxt->dmm_rsv_list, link) {
+ status = proc_un_reserve_memory(ctxt->hprocessor, (void *)
+ rsv_obj->dsp_reserved_addr,
+ ctxt);
+ if (status)
+ pr_err("%s: proc_un_reserve_memory failed!"
+ " status = 0x%xn", __func__, status);
+ }
return status;
}
host_res->dw_sys_ctrl_base = ioremap(OMAP_SYSC_BASE, OMAP_SYSC_SIZE);
dev_dbg(bridge, "dw_mem_base[0] 0x%x\n", host_res->dw_mem_base[0]);
dev_dbg(bridge, "dw_mem_base[3] 0x%x\n", host_res->dw_mem_base[3]);
+ dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
/* for 24xx base port is not mapping the mamory for DSP
* internal memory TODO Do a ioremap here */
OMAP_PER_PRM_SIZE);
host_res->dw_core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
OMAP_CORE_PRM_SIZE);
+ host_res->dw_dmmu_base = ioremap(OMAP_DMMU_BASE,
+ OMAP_DMMU_SIZE);
dev_dbg(bridge, "dw_mem_base[0] 0x%x\n",
host_res->dw_mem_base[0]);
host_res->dw_mem_base[3]);
dev_dbg(bridge, "dw_mem_base[4] 0x%x\n",
host_res->dw_mem_base[4]);
+ dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
shm_size = drv_datap->shm_size;
if (shm_size >= 0x10000) {
pr_ctxt->res_state = PROC_RES_ALLOCATED;
spin_lock_init(&pr_ctxt->dmm_map_lock);
INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
+ spin_lock_init(&pr_ctxt->dmm_rsv_lock);
+ INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
if (pr_ctxt->node_id) {
/* ----------------------------------- This */
#include <dspbridge/nodepriv.h>
#include <dspbridge/node.h>
+#include <dspbridge/dmm.h>
/* Static/Dynamic Loader includes */
#include <dspbridge/dbll.h>
u32 mapped_addr = 0;
u32 map_attrs = 0x0;
struct dsp_processorstate proc_state;
+#ifdef DSP_DMM_DEBUG
+ struct dmm_object *dmm_mgr;
+ struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+#endif
void *node_res;
if (status)
goto func_cont;
+ status = proc_reserve_memory(hprocessor,
+ pnode->create_args.asa.task_arg_obj.
+ heap_size + PAGE_SIZE,
+ (void **)&(pnode->create_args.asa.
+ task_arg_obj.udsp_heap_res_addr),
+ pr_ctxt);
+ if (status) {
+ pr_err("%s: Failed to reserve memory for heap: 0x%x\n",
+ __func__, status);
+ goto func_cont;
+ }
+#ifdef DSP_DMM_DEBUG
+ status = dmm_get_handle(p_proc_object, &dmm_mgr);
+ if (!dmm_mgr) {
+ status = DSP_EHANDLE;
+ goto func_cont;
+ }
+
+ dmm_mem_map_dump(dmm_mgr);
+#endif
+
map_attrs |= DSP_MAPLITTLEENDIAN;
map_attrs |= DSP_MAPELEMSIZE32;
map_attrs |= DSP_MAPVIRTUALADDR;
status = proc_map(hprocessor, (void *)attr_in->pgpp_virt_addr,
pnode->create_args.asa.task_arg_obj.heap_size,
- NULL, (void **)&mapped_addr, map_attrs,
+ (void *)pnode->create_args.asa.task_arg_obj.
+ udsp_heap_res_addr, (void **)&mapped_addr, map_attrs,
pr_ctxt);
if (status)
pr_err("%s: Failed to map memory for Heap: 0x%x\n",
struct stream_chnl stream;
struct node_msgargs node_msg_args;
struct node_taskargs task_arg_obj;
-
+#ifdef DSP_DMM_DEBUG
+ struct dmm_object *dmm_mgr;
+ struct proc_object *p_proc_object =
+ (struct proc_object *)hnode->hprocessor;
+#endif
int status;
if (!hnode)
goto func_end;
status = proc_un_map(hnode->hprocessor, (void *)
task_arg_obj.udsp_heap_addr,
pr_ctxt);
+
+ status = proc_un_reserve_memory(hnode->hprocessor,
+ (void *)
+ task_arg_obj.
+ udsp_heap_res_addr,
+ pr_ctxt);
+#ifdef DSP_DMM_DEBUG
+ status = dmm_get_handle(p_proc_object, &dmm_mgr);
+ if (dmm_mgr)
+ dmm_mem_map_dump(dmm_mgr);
+ else
+ status = DSP_EHANDLE;
+#endif
}
}
if (node_type != NODE_MESSAGE) {
#include <dspbridge/cod.h>
#include <dspbridge/dev.h>
#include <dspbridge/procpriv.h>
+#include <dspbridge/dmm.h>
/* ----------------------------------- Resource Manager */
#include <dspbridge/mgr.h>
#include <dspbridge/msg.h>
#include <dspbridge/dspioctl.h>
#include <dspbridge/drv.h>
-#include <_tiomap.h>
/* ----------------------------------- This */
#include <dspbridge/proc.h>
return map_obj;
}
+static int match_exact_map_obj(struct dmm_map_object *map_obj,
+ u32 dsp_addr, u32 size)
+{
+ if (map_obj->dsp_addr == dsp_addr && map_obj->size != size)
+ pr_err("%s: addr match (0x%x), size don't (0x%x != 0x%x)\n",
+ __func__, dsp_addr, map_obj->size, size);
+
+ return map_obj->dsp_addr == dsp_addr &&
+ map_obj->size == size;
+}
+
static void remove_mapping_information(struct process_context *pr_ctxt,
- u32 dsp_addr)
+ u32 dsp_addr, u32 size)
{
struct dmm_map_object *map_obj;
- pr_debug("%s: looking for virt 0x%x\n", __func__, dsp_addr);
+ pr_debug("%s: looking for virt 0x%x size 0x%x\n", __func__,
+ dsp_addr, size);
spin_lock(&pr_ctxt->dmm_map_lock);
list_for_each_entry(map_obj, &pr_ctxt->dmm_map_list, link) {
- pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x\n",
+ pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x size 0x%x\n",
__func__,
map_obj->mpu_addr,
- map_obj->dsp_addr);
+ map_obj->dsp_addr,
+ map_obj->size);
- if (map_obj->dsp_addr == dsp_addr) {
+ if (match_exact_map_obj(map_obj, dsp_addr, size)) {
pr_debug("%s: match, deleting map info\n", __func__);
list_del(&map_obj->link);
kfree(map_obj->dma_info.sg);
s32 cnew_envp; /* " " in new_envp[] */
s32 nproc_id = 0; /* Anticipate MP version. */
struct dcd_manager *hdcd_handle;
+ struct dmm_object *dmm_mgr;
u32 dw_ext_end;
u32 proc_id;
int brd_state;
if (!status)
status = cod_get_sym_value(cod_mgr, EXTEND,
&dw_ext_end);
+
+ /* Reset DMM structs and add an initial free chunk */
+ if (!status) {
+ status =
+ dev_get_dmm_mgr(p_proc_object->hdev_obj,
+ &dmm_mgr);
+ if (dmm_mgr) {
+ /* Set dw_ext_end to DMM START u8
+ * address */
+ dw_ext_end =
+ (dw_ext_end + 1) * DSPWORDSIZE;
+ /* DMM memory is from EXT_END */
+ status = dmm_create_tables(dmm_mgr,
+ dw_ext_end,
+ DMMPOOLSIZE);
+ } else {
+ status = -EFAULT;
+ }
+ }
}
}
/* Restore the original argv[0] */
{
u32 va_align;
u32 pa_align;
+ struct dmm_object *dmm_mgr;
u32 size_align;
int status = 0;
struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
struct dmm_map_object *map_obj;
+ u32 tmp_addr = 0;
#ifdef CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK
if ((ul_map_attr & BUFMODE_MASK) != RBUF) {
}
/* Critical section */
mutex_lock(&proc_lock);
+ dmm_get_handle(p_proc_object, &dmm_mgr);
+ if (dmm_mgr)
+ status = dmm_map_memory(dmm_mgr, va_align, size_align);
+ else
+ status = -EFAULT;
/* Add mapping to the page tables. */
if (!status) {
+
+ /* Mapped address = MSB of VA | LSB of PA */
+ tmp_addr = (va_align | ((u32) pmpu_addr & (PG_SIZE4K - 1)));
/* mapped memory resource tracking */
- map_obj = add_mapping_info(pr_ctxt, pa_align, va_align,
+ map_obj = add_mapping_info(pr_ctxt, pa_align, tmp_addr,
size_align);
- if (!map_obj) {
+ if (!map_obj)
status = -ENOMEM;
- } else {
- va_align = user_to_dsp_map(
- p_proc_object->hbridge_context->dsp_mmu,
- pa_align, va_align, size_align,
- map_obj->pages);
- if (IS_ERR_VALUE(va_align))
- status = (int)va_align;
- }
+ else
+ status = (*p_proc_object->intf_fxns->pfn_brd_mem_map)
+ (p_proc_object->hbridge_context, pa_align, va_align,
+ size_align, ul_map_attr, map_obj->pages);
}
if (!status) {
/* Mapped address = MSB of VA | LSB of PA */
- map_obj->dsp_addr = (va_align |
- ((u32)pmpu_addr & (PG_SIZE4K - 1)));
- *pp_map_addr = (void *)map_obj->dsp_addr;
+ *pp_map_addr = (void *) tmp_addr;
} else {
- remove_mapping_information(pr_ctxt, va_align);
+ remove_mapping_information(pr_ctxt, tmp_addr, size_align);
+ dmm_un_map_memory(dmm_mgr, va_align, &size_align);
}
mutex_unlock(&proc_lock);
return status;
}
+/*
+ * ======== proc_reserve_memory ========
+ * Purpose:
+ * Reserve a virtually contiguous region of DSP address space.
+ */
+int proc_reserve_memory(void *hprocessor, u32 ul_size,
+ void **pp_rsv_addr,
+ struct process_context *pr_ctxt)
+{
+ struct dmm_object *dmm_mgr;
+ int status = 0;
+ struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+ struct dmm_rsv_object *rsv_obj;
+
+ if (!p_proc_object) {
+ status = -EFAULT;
+ goto func_end;
+ }
+
+ status = dmm_get_handle(p_proc_object, &dmm_mgr);
+ if (!dmm_mgr) {
+ status = -EFAULT;
+ goto func_end;
+ }
+
+ status = dmm_reserve_memory(dmm_mgr, ul_size, (u32 *) pp_rsv_addr);
+ if (status != 0)
+ goto func_end;
+
+ /*
+ * A successful reserve should be followed by insertion of rsv_obj
+ * into dmm_rsv_list, so that reserved memory resource tracking
+ * remains uptodate
+ */
+ rsv_obj = kmalloc(sizeof(struct dmm_rsv_object), GFP_KERNEL);
+ if (rsv_obj) {
+ rsv_obj->dsp_reserved_addr = (u32) *pp_rsv_addr;
+ spin_lock(&pr_ctxt->dmm_rsv_lock);
+ list_add(&rsv_obj->link, &pr_ctxt->dmm_rsv_list);
+ spin_unlock(&pr_ctxt->dmm_rsv_lock);
+ }
+
+func_end:
+ dev_dbg(bridge, "%s: hprocessor: 0x%p ul_size: 0x%x pp_rsv_addr: 0x%p "
+ "status 0x%x\n", __func__, hprocessor,
+ ul_size, pp_rsv_addr, status);
+ return status;
+}
+
/*
* ======== proc_start ========
* Purpose:
{
int status = 0;
struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+ struct dmm_object *dmm_mgr;
u32 va_align;
+ u32 size_align;
va_align = PG_ALIGN_LOW((u32) map_addr, PG_SIZE4K);
if (!p_proc_object) {
goto func_end;
}
+ status = dmm_get_handle(hprocessor, &dmm_mgr);
+ if (!dmm_mgr) {
+ status = -EFAULT;
+ goto func_end;
+ }
+
/* Critical section */
mutex_lock(&proc_lock);
+ /*
+ * Update DMM structures. Get the size to unmap.
+ * This function returns error if the VA is not mapped
+ */
+ status = dmm_un_map_memory(dmm_mgr, (u32) va_align, &size_align);
/* Remove mapping from the page tables. */
- status = user_to_dsp_unmap(p_proc_object->hbridge_context->dsp_mmu,
- va_align);
+ if (!status) {
+ status = (*p_proc_object->intf_fxns->pfn_brd_mem_un_map)
+ (p_proc_object->hbridge_context, va_align, size_align);
+ }
mutex_unlock(&proc_lock);
if (status)
* from dmm_map_list, so that mapped memory resource tracking
* remains uptodate
*/
- remove_mapping_information(pr_ctxt, (u32) map_addr);
+ remove_mapping_information(pr_ctxt, (u32) map_addr, size_align);
func_end:
dev_dbg(bridge, "%s: hprocessor: 0x%p map_addr: 0x%p status: 0x%x\n",
return status;
}
+/*
+ * ======== proc_un_reserve_memory ========
+ * Purpose:
+ * Frees a previously reserved region of DSP address space.
+ */
+int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
+ struct process_context *pr_ctxt)
+{
+ struct dmm_object *dmm_mgr;
+ int status = 0;
+ struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+ struct dmm_rsv_object *rsv_obj;
+
+ if (!p_proc_object) {
+ status = -EFAULT;
+ goto func_end;
+ }
+
+ status = dmm_get_handle(p_proc_object, &dmm_mgr);
+ if (!dmm_mgr) {
+ status = -EFAULT;
+ goto func_end;
+ }
+
+ status = dmm_un_reserve_memory(dmm_mgr, (u32) prsv_addr);
+ if (status != 0)
+ goto func_end;
+
+ /*
+ * A successful unreserve should be followed by removal of rsv_obj
+ * from dmm_rsv_list, so that reserved memory resource tracking
+ * remains uptodate
+ */
+ spin_lock(&pr_ctxt->dmm_rsv_lock);
+ list_for_each_entry(rsv_obj, &pr_ctxt->dmm_rsv_list, link) {
+ if (rsv_obj->dsp_reserved_addr == (u32) prsv_addr) {
+ list_del(&rsv_obj->link);
+ kfree(rsv_obj);
+ break;
+ }
+ }
+ spin_unlock(&pr_ctxt->dmm_rsv_lock);
+
+func_end:
+ dev_dbg(bridge, "%s: hprocessor: 0x%p prsv_addr: 0x%p status: 0x%x\n",
+ __func__, hprocessor, prsv_addr, status);
+ return status;
+}
+
/*
* ======== = proc_monitor ======== ==
* Purpose:
struct tm6000_fh *fh=priv;
struct tm6000_core *dev = fh->dev;
+ dev->norm = *norm;
rc = tm6000_init_analog_mode(dev);
fh->width = dev->width;
struct fb_deferred_io *fbdefio;
- fbdefio = kmalloc(GFP_KERNEL, sizeof(struct fb_deferred_io));
+ fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL);
if (fbdefio) {
fbdefio->delay = DL_DEFIO_WRITE_DELAY;
{
char essid[IW_ESSID_MAX_SIZE+1];
- if (wrq->u.essid.pointer)
+ if (wrq->u.essid.pointer) {
rc = iwctl_giwessid(dev, NULL,
&(wrq->u.essid), essid);
if (copy_to_user(wrq->u.essid.pointer,
essid,
wrq->u.essid.length) )
rc = -EFAULT;
+ }
}
break;
*/
bus_mask = 0;
media_mask = 0;
- media_mask = 0;
for (bus = 0; bus < CY_AS_MAX_BUSES; bus++) {
for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES; device++) {
if (config_p->devices_to_enumerate[bus][device] ==
}
int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_index, const u8 *mac_addr,
+ u8 key_index, bool pairwise, const u8 *mac_addr,
struct key_params *params)
{
wlandevice_t *wlandev = dev->ml_priv;
}
int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_index, const u8 *mac_addr, void *cookie,
+ u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie,
void (*callback)(void *cookie, struct key_params*))
{
wlandevice_t *wlandev = dev->ml_priv;
}
int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_index, const u8 *mac_addr)
+ u8 key_index, bool pairwise, const u8 *mac_addr)
{
wlandevice_t *wlandev = dev->ml_priv;
u32 did;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
- }
#endif
+ }
return -EOPNOTSUPP;
}
--- /dev/null
+obj-y += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
+ tty_buffer.o tty_port.o tty_mutex.o
+obj-$(CONFIG_LEGACY_PTYS) += pty.o
+obj-$(CONFIG_UNIX98_PTYS) += pty.o
+obj-$(CONFIG_AUDIT) += tty_audit.o
+obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
+obj-$(CONFIG_N_HDLC) += n_hdlc.o
+obj-$(CONFIG_N_GSM) += n_gsm.o
+obj-$(CONFIG_R3964) += n_r3964.o
+
+obj-y += vt/
if (msg->len < 128)
*--dp = (msg->len << 1) | EA;
else {
- *--dp = (msg->len >> 6) | EA;
- *--dp = (msg->len & 127) << 1;
+ *--dp = ((msg->len & 127) << 1) | EA;
+ *--dp = (msg->len >> 6) & 0xfe;
}
}
gsm->mru = c->mru;
gsm->encoding = c->encapsulation;
gsm->adaption = c->adaption;
+ gsm->n2 = c->n2;
if (c->i == 1)
gsm->ftype = UIH;
spin_lock_irqsave(&tty->buf.lock, flags);
if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
- struct tty_buffer *head;
+ struct tty_buffer *head, *tail = tty->buf.tail;
+ int seen_tail = 0;
while ((head = tty->buf.head) != NULL) {
int count;
char *char_buf;
if (!count) {
if (head->next == NULL)
break;
+ /*
+ There's a possibility tty might get new buffer
+ added during the unlock window below. We could
+ end up spinning in here forever hogging the CPU
+ completely. To avoid this let's have a rest each
+ time we processed the tail buffer.
+ */
+ if (tail == head)
+ seen_tail = 1;
tty->buf.head = head->next;
tty_buffer_free(tty, head);
continue;
line discipline as we want to empty the queue */
if (test_bit(TTY_FLUSHPENDING, &tty->flags))
break;
- if (!tty->receive_room) {
+ if (!tty->receive_room || seen_tail) {
schedule_delayed_work(&tty->buf.work, 1);
break;
}
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
return;
}
local_irq_restore(flags);
+ wake_up(&tty_ldisc_idle);
}
/**
return cancel_delayed_work_sync(&tty->buf.work);
}
+/**
+ * tty_ldisc_wait_idle - wait for the ldisc to become idle
+ * @tty: tty to wait for
+ *
+ * Wait for the line discipline to become idle. The discipline must
+ * have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+ int ret;
+ ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+ atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+ if (ret < 0)
+ return ret;
+ return ret > 0 ? 0 : -EBUSY;
+}
+
/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
flush_scheduled_work();
+ retval = tty_ldisc_wait_idle(tty);
+
tty_lock();
mutex_lock(&tty->ldisc_mutex);
+
+ /* handle wait idle failure locked */
+ if (retval) {
+ tty_ldisc_put(new_ldisc);
+ goto enable;
+ }
+
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
tty_ldisc_put(o_ldisc);
+enable:
/*
* Allow ldisc referencing to occur again
*/
* state closed
*/
-static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
- struct tty_ldisc *ld;
+ struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+
+ if (IS_ERR(ld))
+ return -1;
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
/*
* Switch the line discipline back
*/
- ld = tty_ldisc_get(ldisc);
- BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
tty_set_termios_ldisc(tty, ldisc);
+
+ return 0;
}
/**
a FIXME */
if (tty->ldisc) { /* Not yet closed */
if (reset == 0) {
- tty_ldisc_reinit(tty, tty->termios->c_line);
- err = tty_ldisc_open(tty, tty->ldisc);
+
+ if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+ err = tty_ldisc_open(tty, tty->ldisc);
+ else
+ err = 1;
}
/* If the re-open fails or we reset then go to N_TTY. The
N_TTY open cannot fail */
if (reset || err) {
- tty_ldisc_reinit(tty, N_TTY);
+ BUG_ON(tty_ldisc_reinit(tty, N_TTY));
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
}
tty_ldisc_enable(tty);
--- /dev/null
+#
+# This file contains the font map for the default (hardware) font
+#
+FONTMAPFILE = cp437.uni
+
+obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o \
+ selection.o keyboard.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
+obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
+
+# Files generated that shall be removed upon make clean
+clean-files := consolemap_deftbl.c defkeymap.c
+
+quiet_cmd_conmk = CONMK $@
+ cmd_conmk = scripts/conmakehash $< > $@
+
+$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
+ $(call cmd,conmk)
+
+$(obj)/defkeymap.o: $(obj)/defkeymap.c
+
+# Uncomment if you're changing the keymap and have an appropriate
+# loadkeys version for the map. By default, we'll use the shipped
+# versions.
+# GENERATE_KEYMAP := 1
+
+ifdef GENERATE_KEYMAP
+
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
+ loadkeys --mktable $< > $@.tmp
+ sed -e 's/^static *//' $@.tmp > $@
+ rm $@.tmp
+
+endif
vcs_poll(struct file *file, poll_table *wait)
{
struct vcs_poll_data *poll = vcs_poll_data_get(file);
- int ret = 0;
+ int ret = DEFAULT_POLLMASK|POLLERR|POLLPRI;
if (poll) {
poll_wait(file, &poll->waitq, wait);
- if (!poll->seen_last_update)
- ret = POLLIN | POLLRDNORM;
+ if (poll->seen_last_update)
+ ret = DEFAULT_POLLMASK;
}
return ret;
}
static int proc_connectinfo(struct dev_state *ps, void __user *arg)
{
- struct usbdevfs_connectinfo ci;
+ struct usbdevfs_connectinfo ci = {
+ .devnum = ps->dev->devnum,
+ .slow = ps->dev->speed == USB_SPEED_LOW
+ };
- ci.devnum = ps->dev->devnum;
- ci.slow = ps->dev->speed == USB_SPEED_LOW;
if (copy_to_user(arg, &ci, sizeof(ci)))
return -EFAULT;
return 0;
boolean "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
- select USB_FSL_MPH_DR_OF
+ select USB_FSL_MPH_DR_OF if OF
help
Some of Freescale PowerPC processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
got_region:1,
req_config:1,
configured:1,
- enabled:1;
+ enabled:1,
+ registered:1;
/* pci state used to access those endpoints */
struct pci_dev *pdev;
INFO(dev, "MAC %pM\n", net->dev_addr);
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
- netif_stop_queue(net);
the_dev = dev;
}
wait_queue_head_t close_wait; /* wait for last close */
struct list_head read_pool;
+ int read_started;
+ int read_allocated;
struct list_head read_queue;
unsigned n_read;
struct tasklet_struct push;
struct list_head write_pool;
+ int write_started;
+ int write_allocated;
struct gs_buf port_write_buf;
wait_queue_head_t drain_wait; /* wait while writes drain */
struct usb_request *req;
int len;
+ if (port->write_started >= QUEUE_SIZE)
+ break;
+
req = list_entry(pool->next, struct usb_request, list);
len = gs_send_packet(port, req->buf, in->maxpacket);
if (len == 0) {
break;
}
+ port->write_started++;
+
/* abort immediately after disconnect */
if (!port->port_usb)
break;
{
struct list_head *pool = &port->read_pool;
struct usb_ep *out = port->port_usb->out;
- unsigned started = 0;
while (!list_empty(pool)) {
struct usb_request *req;
if (!tty)
break;
+ if (port->read_started >= QUEUE_SIZE)
+ break;
+
req = list_entry(pool->next, struct usb_request, list);
list_del(&req->list);
req->length = out->maxpacket;
list_add(&req->list, pool);
break;
}
- started++;
+ port->read_started++;
/* abort immediately after disconnect */
if (!port->port_usb)
break;
}
- return started;
+ return port->read_started;
}
/*
}
recycle:
list_move(&req->list, &port->read_pool);
+ port->read_started--;
}
/* Push from tty to ldisc; without low_latency set this is handled by
spin_lock(&port->port_lock);
list_add(&req->list, &port->write_pool);
+ port->write_started--;
switch (req->status) {
default:
spin_unlock(&port->port_lock);
}
-static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+ int *allocated)
{
struct usb_request *req;
req = list_entry(head->next, struct usb_request, list);
list_del(&req->list);
gs_free_req(ep, req);
+ if (allocated)
+ (*allocated)--;
}
}
static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
- void (*fn)(struct usb_ep *, struct usb_request *))
+ void (*fn)(struct usb_ep *, struct usb_request *),
+ int *allocated)
{
int i;
struct usb_request *req;
+ int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
* do quite that many this time, don't fail ... we just won't
* be as speedy as we might otherwise be.
*/
- for (i = 0; i < QUEUE_SIZE; i++) {
+ for (i = 0; i < n; i++) {
req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
if (!req)
return list_empty(head) ? -ENOMEM : 0;
req->complete = fn;
list_add_tail(&req->list, head);
+ if (allocated)
+ (*allocated)++;
}
return 0;
}
* configurations may use different endpoints with a given port;
* and high speed vs full speed changes packet sizes too.
*/
- status = gs_alloc_requests(ep, head, gs_read_complete);
+ status = gs_alloc_requests(ep, head, gs_read_complete,
+ &port->read_allocated);
if (status)
return status;
status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
- gs_write_complete);
+ gs_write_complete, &port->write_allocated);
if (status) {
- gs_free_requests(ep, head);
+ gs_free_requests(ep, head, &port->read_allocated);
return status;
}
if (started) {
tty_wakeup(port->port_tty);
} else {
- gs_free_requests(ep, head);
- gs_free_requests(port->port_usb->in, &port->write_pool);
+ gs_free_requests(ep, head, &port->read_allocated);
+ gs_free_requests(port->port_usb->in, &port->write_pool,
+ &port->write_allocated);
status = -EIO;
}
spin_lock_irqsave(&port->port_lock, flags);
if (port->open_count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
- gs_free_requests(gser->out, &port->read_pool);
- gs_free_requests(gser->out, &port->read_queue);
- gs_free_requests(gser->in, &port->write_pool);
+ gs_free_requests(gser->out, &port->read_pool, NULL);
+ gs_free_requests(gser->out, &port->read_queue, NULL);
+ gs_free_requests(gser->in, &port->write_pool, NULL);
+
+ port->read_allocated = port->read_started =
+ port->write_allocated = port->write_started = 0;
+
spin_unlock_irqrestore(&port->port_lock, flags);
}
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
select USB_EHCI_ROOT_HUB_TT
- select USB_FSL_MPH_DR_OF
+ select USB_FSL_MPH_DR_OF if OF
---help---
Variation of ARC USB block used in some Freescale chips.
static int ehci_mxc_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct device *dev = hcd->self.controller;
+ struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
int retval;
/* EHCI registers start at offset 0x100 */
ehci_reset(ehci);
+ /* set up the PORTSCx register */
+ ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
+
+ /* is this really needed? */
+ msleep(10);
+
ehci_port_power(ehci, 0);
return 0;
}
struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd;
struct resource *res;
- int irq, ret, temp;
+ int irq, ret;
struct ehci_mxc_priv *priv;
struct device *dev = &pdev->dev;
clk_enable(priv->ahbclk);
}
- /* set up the PORTSCx register */
- ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
- mdelay(10);
-
/* setup specific usb hw */
ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
if (ret < 0)
},
};
-MODULE_ALIAS("platfrom:jz4740-ohci");
+MODULE_ALIAS("platform:jz4740-ohci");
/* needed for power consumption */
struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
+ memset(&info, 0, sizeof(info));
/* directly from the descriptor */
info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
info.product = dev->product_id;
#else
x.sisusb_conactive = 0;
#endif
+ memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
if (copy_to_user((void __user *)arg, &x, sizeof(x)))
retval = -EFAULT;
}
/* Start sampling ID pin, when plug is removed from MUSB */
- if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
- || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
+ || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) ||
+ (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
musb->a_wait_bcon = TIMER_DELAY;
}
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static void musb_platform_reg_init(struct musb *musb)
{
-
- /*
- * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
- * and OTG HOST modes, while rev 1.1 and greater require PE7 to
- * be low for DEVICE mode and high for HOST mode. We set it high
- * here because we are in host mode
- */
-
- if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
- printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
- musb->config->gpio_vrsel);
- return -ENODEV;
- }
- gpio_direction_output(musb->config->gpio_vrsel, 0);
-
- usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
- if (!musb->xceiv) {
- gpio_free(musb->config->gpio_vrsel);
- return -ENODEV;
- }
-
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
}
/* Configure PLL oscillator register */
- bfin_write_USB_PLLOSC_CTRL(0x30a8);
+ bfin_write_USB_PLLOSC_CTRL(0x3080 |
+ ((480/musb->config->clkin) << 1));
SSYNC();
bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
SSYNC();
+}
+
+int __init musb_platform_init(struct musb *musb, void *board_data)
+{
+
+ /*
+ * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+ * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+ * be low for DEVICE mode and high for HOST mode. We set it high
+ * here because we are in host mode
+ */
+
+ if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+ printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+ musb->config->gpio_vrsel);
+ return -ENODEV;
+ }
+ gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ gpio_free(musb->config->gpio_vrsel);
+ return -ENODEV;
+ }
+
+ musb_platform_reg_init(musb);
if (is_host_enabled(musb)) {
musb->board_set_vbus = bfin_set_vbus;
return 0;
}
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+ if (is_host_active(musb))
+ /*
+ * During hibernate gpio_vrsel will change from high to low
+ * low which will generate wakeup event resume the system
+ * immediately. Set it to 0 before hibernate to avoid this
+ * wakeup event.
+ */
+ gpio_set_value(musb->config->gpio_vrsel, 0);
+}
+
+void musb_platform_restore_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+ musb_platform_reg_init(musb);
+}
+#endif
+
int musb_platform_exit(struct musb *musb)
{
gpio_free(musb->config->gpio_vrsel);
if (int_usb & MUSB_INTR_SESSREQ) {
void __iomem *mbase = musb->mregs;
- if (devctl & MUSB_DEVCTL_BDEVICE) {
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
+ && (devctl & MUSB_DEVCTL_BDEVICE)) {
DBG(3, "SessReq while on B state\n");
return IRQ_HANDLED;
}
clk_put(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
+ if (!is_otg_enabled(musb) && is_host_enabled(musb))
+ usb_remove_hcd(musb_to_hcd(musb));
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_platform_exit(musb);
+
/* FIXME power down */
}
*/
musb_exit_debugfs(musb);
musb_shutdown(pdev);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (musb->board_mode == MUSB_HOST)
- usb_remove_hcd(musb_to_hcd(musb));
-#endif
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
- musb_platform_exit(musb);
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
musb_free(musb);
iounmap(ctrl_base);
unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
spin_lock_irqsave(&musb->lock, flags);
if (is_peripheral_active(musb)) {
musb_save_context(musb);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
+ if (musb->clock) {
+ if (musb->set_clock)
+ musb->set_clock(musb->clock, 0);
+ else
+ clk_disable(musb->clock);
+ }
spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
struct platform_device *pdev = to_platform_device(dev);
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
+ if (musb->clock) {
+ if (musb->set_clock)
+ musb->set_clock(musb->clock, 1);
+ else
+ clk_enable(musb->clock);
+ }
musb_restore_context(musb);
};
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+ defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
extern void musb_platform_save_context(struct musb *musb,
struct musb_context_registers *musb_context);
extern void musb_platform_restore_context(struct musb *musb,
*/
csr |= MUSB_RXCSR_DMAENAB;
- if (!musb_ep->hb_mult &&
- musb_ep->hw_ep->rx_double_buffered)
- csr |= MUSB_RXCSR_AUTOCLEAR;
#ifdef USE_MODE1
+ csr |= MUSB_RXCSR_AUTOCLEAR;
/* csr |= MUSB_RXCSR_DMAMODE; */
/* this special sequence (enabling and then
*/
musb_writew(epio, MUSB_RXCSR,
csr | MUSB_RXCSR_DMAMODE);
+#else
+ if (!musb_ep->hb_mult &&
+ musb_ep->hw_ep->rx_double_buffered)
+ csr |= MUSB_RXCSR_AUTOCLEAR;
#endif
musb_writew(epio, MUSB_RXCSR, csr);
#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
/* Autoclear doesn't clear RxPktRdy for short packets */
- if ((dma->desired_mode == 0)
+ if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
|| (dma->actual_len
& (musb_ep->packet_sz - 1))) {
/* ack the read! */
/* incomplete, and not short? wait for next IN packet */
if ((request->actual < request->length)
&& (musb_ep->dma->actual_len
- == musb_ep->packet_sz))
+ == musb_ep->packet_sz)) {
+ /* In double buffer case, continue to unload fifo if
+ * there is Rx packet in FIFO.
+ **/
+ csr = musb_readw(epio, MUSB_RXCSR);
+ if ((csr & MUSB_RXCSR_RXPKTRDY) &&
+ hw_ep->rx_double_buffered)
+ goto exit;
return;
+ }
#endif
musb_g_giveback(musb_ep, request, 0);
if (!request)
return;
}
-
+exit:
/* Analyze request */
rxstate(musb, to_musb_request(request));
}
* likewise high bandwidth periodic tx
*/
/* Set TXMAXP with the FIFO size of the endpoint
- * to disable double buffering mode. Currently, It seems that double
- * buffering has problem if musb RTL revision number < 2.0.
+ * to disable double buffering mode.
*/
- if (musb->hwvers < MUSB_HWVERS_2000)
- musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
- else
- musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- if (musb->hwvers < MUSB_HWVERS_2000)
- musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
- else
- musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
: DMA_FROM_DEVICE);
request->mapped = 0;
}
- } else if (!req->buf) {
- return -ENODATA;
} else
request->mapped = 0;
musb_platform_try_idle(musb, 0);
status = device_register(&musb->g.dev);
- if (status != 0)
+ if (status != 0) {
+ put_device(&musb->g.dev);
the_gadget = NULL;
+ }
return status;
}
return 0;
}
-static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum)
+static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
{
+ return 0;
}
#endif /* CONFIG_BLACKFIN */
dma_addr_t dma_addr, u32 len)
{
struct musb_dma_channel *musb_channel = channel->private_data;
+ struct musb_dma_controller *controller = musb_channel->controller;
+ struct musb *musb = controller->private_data;
DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
musb_channel->epnum,
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
channel->status == MUSB_DMA_STATUS_BUSY);
+ /*
+ * The DMA engine in RTL1.8 and above cannot handle
+ * DMA addresses that are not aligned to a 4 byte boundary.
+ * It ends up masking the last two bits of the address
+ * programmed in DMA_ADDR.
+ *
+ * Fail such DMA transfers, so that the backup PIO mode
+ * can carry out the transfer
+ */
+ if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
+ return false;
+
channel->actual_len = 0;
musb_channel->start_addr = dma_addr;
musb_channel->len = len;
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+ { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18
#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C
#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID 0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
+
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
iu->iu_id = IU_ID_COMMAND;
iu->tag = cpu_to_be16(stream_id);
- if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER))
- iu->prio_attr = UAS_ORDERED_TAG;
- else
- iu->prio_attr = UAS_SIMPLE_TAG;
+ iu->prio_attr = UAS_SIMPLE_TAG;
iu->len = len;
int_to_scsilun(sdev->lun, &iu->lun);
memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
int bit_index;
ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
-
+ if (!ai)
+ return UWB_RSV_ALLOC_NOT_FOUND;
ai->min_mas = rsv->min_mas;
ai->max_mas = rsv->max_mas;
ai->max_interval = rsv->max_interval;
struct device_attribute *attr, const char *buf, size_t count)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
- strict_strtoul(buf, 10, &data->cached_daylight_max);
return adp8860_store(dev, buf, count, ADP8860_BLMX1);
}
static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
if (val == 0) {
/* Enable automatic ambient light sensing */
adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
- } else if ((val > 0) && (val < 6)) {
+ } else if ((val > 0) && (val <= 3)) {
/* Disable automatic ambient light sensing */
adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
mutex_lock(&data->lock);
adp8860_read(data->client, ADP8860_CFGR, ®_val);
reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
- reg_val |= val << CFGR_BLV_SHIFT;
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
adp8860_write(data->client, ADP8860_CFGR, reg_val);
mutex_unlock(&data->lock);
}
const u16 slpin = 0x10;
const u16 disoff = 0x28;
- if (power) {
+ if (power <= FB_BLANK_NORMAL) {
if (priv->lcd_on)
return 0;
struct spi_device *spi = st->spi;
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
- if (power) {
+ if (power <= FB_BLANK_NORMAL) {
if (pdata)
lms283gf05_reset(pdata->reset_gpio,
pdata->reset_inverted);
},
.driver_data = (void *)&nvidia_chipset_data,
},
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookAir 3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookAir 3,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
{ }
};
struct pwm_device *pwm;
struct device *dev;
unsigned int period;
+ unsigned int lth_brightness;
int (*notify)(struct device *,
int brightness);
};
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
} else {
- pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+ brightness = pb->lth_brightness +
+ (brightness * (pb->period - pb->lth_brightness) / max);
+ pwm_config(pb->pwm, brightness, pb->period);
pwm_enable(pb->pwm);
}
return 0;
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
+ pb->lth_brightness = data->lth_brightness *
+ (data->pwm_period_ns / data->max_brightness);
pb->dev = &pdev->dev;
pb->pwm = pwm_request(data->pwm_id, "backlight");
return strlen(buf);
}
-static DEVICE_ATTR(gamma_table, 0644,
+static DEVICE_ATTR(gamma_table, 0444,
s6e63m0_sysfs_show_gamma_table, NULL);
-static int __init s6e63m0_probe(struct spi_device *spi)
+static int __devinit s6e63m0_probe(struct spi_device *spi)
{
int ret = 0;
struct s6e63m0 *lcd = NULL;
struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+ device_remove_file(&spi->dev, &dev_attr_gamma_table);
+ device_remove_file(&spi->dev, &dev_attr_gamma_mode);
+ backlight_device_unregister(lcd->bd);
lcd_device_unregister(lcd->ld);
kfree(lcd);
size = PAGE_ALIGN(size);
if (paddr) {
- if ((paddr & ~PAGE_MASK) ||
- !memblock_is_region_memory(paddr, size)) {
- pr_err("Illegal SDRAM region for VRAM\n");
+ if (paddr & ~PAGE_MASK) {
+ pr_err("VRAM start address 0x%08x not page aligned\n",
+ paddr);
+ return;
+ }
+
+ if (!memblock_is_region_memory(paddr, size)) {
+ pr_err("Illegal SDRAM region 0x%08x..0x%08x for VRAM\n",
+ paddr, paddr + size - 1);
return;
}
return;
}
} else {
- paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
+ paddr = memblock_alloc(size, PAGE_SIZE);
}
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
+
omap_vram_add_region(paddr, size);
pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_RIVA;
chan->adapter.class = i2c_class;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pdev->dev;
if (!hdmi->info)
goto out;
+ hdmi->monspec.modedb_len = 0;
+ fb_destroy_modedb(hdmi->monspec.modedb);
+ hdmi->monspec.modedb = NULL;
+
acquire_console_sem();
/* HDMI disconnect */
release_console_sem();
pm_runtime_put(hdmi->dev);
- fb_destroy_modedb(hdmi->monspec.modedb);
}
out:
.xres = 1280,
.yres = 720,
- .left_margin = 200,
- .right_margin = 88,
- .hsync_len = 48,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.pixclock = 13468,
+ .refresh = 60,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
};
const struct fb_videomode *mode = cfg->lcd_cfg;
unsigned long max_size = 0;
int k;
+ int num_cfg;
ch->info = framebuffer_alloc(0, &pdev->dev);
if (!ch->info) {
info->fix = sh_mobile_lcdc_fix;
info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
- if (!mode)
+ if (!mode) {
mode = &default_720p;
+ num_cfg = 1;
+ } else {
+ num_cfg = ch->cfg.num_cfg;
+ }
+
+ fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
fb_videomode_to_var(var, mode);
/* Default Y virtual resolution is 2x panel size */
for (i = 0; i < j; i++) {
struct sh_mobile_lcdc_chan *ch = priv->ch + i;
- const struct fb_videomode *mode = ch->cfg.lcd_cfg;
-
- if (!mode)
- mode = &default_720p;
info = ch->info;
}
}
- fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
error = register_framebuffer(info);
if (error < 0)
goto err1;
sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize,
unsigned int min)
{
+ if (*mapsize < (min << 20))
+ return;
+
ivideo->video_vbase = ioremap(ivideo->video_base, (*mapsize));
if(!ivideo->video_vbase) {
} else {
#endif
/* Need to map max FB size for finding out about RAM size */
- mapsize = 64 << 20;
+ mapsize = ivideo->video_size;
sisfb_post_map_vram(ivideo, &mapsize, 4);
if(ivideo->video_vbase) {
orSISIDXREG(SISSR, 0x20, (0x80 | 0x04));
/* Need to map max FB size for finding out about RAM size */
- mapsize = 256 << 20;
+ mapsize = ivideo->video_size;
sisfb_post_map_vram(ivideo, &mapsize, 32);
if(!ivideo->video_vbase) {
}
ivideo->video_base = pci_resource_start(pdev, 0);
+ ivideo->video_size = pci_resource_len(pdev, 0);
ivideo->mmio_base = pci_resource_start(pdev, 1);
ivideo->mmio_size = pci_resource_len(pdev, 1);
ivideo->SiS_Pr.RelIO = pci_resource_start(pdev, 2) + 0x30;
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_virq_info(evtchn, virq);
bind_evtchn_to_cpu(evtchn, cpu);
-
- /* Ready for use. */
- unmask_evtchn(evtchn);
}
}
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_ipi_info(evtchn, ipi);
bind_evtchn_to_cpu(evtchn, cpu);
-
- /* Ready for use. */
- unmask_evtchn(evtchn);
-
}
}
void xen_irq_resume(void)
{
unsigned int cpu, irq, evtchn;
+ struct irq_desc *desc;
init_evtchn_cpu_bindings();
restore_cpu_virqs(cpu);
restore_cpu_ipis(cpu);
}
+
+ /*
+ * Unmask any IRQF_NO_SUSPEND IRQs which are enabled. These
+ * are not handled by the IRQ core.
+ */
+ for_each_irq_desc(irq, desc) {
+ if (!desc->action || !(desc->action->flags & IRQF_NO_SUSPEND))
+ continue;
+ if (desc->status & IRQ_DISABLED)
+ continue;
+
+ evtchn = evtchn_from_irq(irq);
+ if (evtchn == -1)
+ continue;
+
+ unmask_evtchn(evtchn);
+ }
}
static struct irq_chip xen_dynamic_chip __read_mostly = {
{
struct bio *bio;
+ if (nr_iovecs > UIO_MAXIOV)
+ return NULL;
+
bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
gfp_mask);
if (unlikely(!bio))
static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
gfp_t gfp_mask)
{
- struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
+ struct bio_map_data *bmd;
+ if (iov_count > UIO_MAXIOV)
+ return NULL;
+
+ bmd = kmalloc(sizeof(*bmd), gfp_mask);
if (!bmd)
return NULL;
end = (uaddr + iov[i].iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT;
start = uaddr >> PAGE_SHIFT;
+ /*
+ * Overflow, abort
+ */
+ if (end < start)
+ return ERR_PTR(-EINVAL);
+
nr_pages += end - start;
len += iov[i].iov_len;
}
unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = uaddr >> PAGE_SHIFT;
+ /*
+ * Overflow, abort
+ */
+ if (end < start)
+ return ERR_PTR(-EINVAL);
+
nr_pages += end - start;
/*
* buffer must be aligned to at least hardsector size for now
unsigned long start = uaddr >> PAGE_SHIFT;
const int local_nr_pages = end - start;
const int page_limit = cur_page + local_nr_pages;
-
+
ret = get_user_pages_fast(uaddr, local_nr_pages,
write_to_vm, &pages[cur_page]);
if (ret < local_nr_pages) {
v) mount check for unmatched uids
-w) Add support for new vfs entry points for setlease and fallocate
+w) Add support for new vfs entry point for fallocate
x) Fix Samba 3 server to handle Linux kernel aio so dbench with lots of
processes can proceed better in parallel (on the server)
* the GNU Lesser General Public License for more details.
*
*/
-#include <linux/radix-tree.h>
+#include <linux/rbtree.h>
#ifndef _CIFS_FS_SB_H
#define _CIFS_FS_SB_H
#define CIFS_MOUNT_MULTIUSER 0x20000 /* multiuser mount */
struct cifs_sb_info {
- struct radix_tree_root tlink_tree;
-#define CIFS_TLINK_MASTER_TAG 0 /* is "master" (mount) tcon */
+ struct rb_root tlink_tree;
spinlock_t tlink_tree_lock;
+ struct tcon_link *master_tlink;
struct nls_table *local_nls;
unsigned int rsize;
unsigned int wsize;
return -ENOMEM;
spin_lock_init(&cifs_sb->tlink_tree_lock);
- INIT_RADIX_TREE(&cifs_sb->tlink_tree, GFP_KERNEL);
+ cifs_sb->tlink_tree = RB_ROOT;
rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
if (rc) {
/* Until the file is open and we have gotten oplock
info back from the server, can not assume caching of
file data or metadata */
- cifs_inode->clientCanCacheRead = false;
- cifs_inode->clientCanCacheAll = false;
+ cifs_set_oplock_level(cifs_inode, 0);
cifs_inode->delete_pending = false;
cifs_inode->invalid_mapping = false;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
* "get" on the container.
*/
struct tcon_link {
- unsigned long tl_index;
+ struct rb_node tl_rbnode;
+ uid_t tl_uid;
unsigned long tl_flags;
#define TCON_LINK_MASTER 0
#define TCON_LINK_PENDING 1
extern u64 cifs_UnixTimeToNT(struct timespec);
extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
int offset);
+extern void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock);
extern struct cifsFileInfo *cifs_new_fileinfo(__u16 fileHandle,
struct file *file, struct tcon_link *tlink,
static int ipv4_connect(struct TCP_Server_Info *server);
static int ipv6_connect(struct TCP_Server_Info *server);
+static void tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink);
static void cifs_prune_tlinks(struct work_struct *work);
/*
goto mount_fail_check;
}
- tlink->tl_index = pSesInfo->linux_uid;
+ tlink->tl_uid = pSesInfo->linux_uid;
tlink->tl_tcon = tcon;
tlink->tl_time = jiffies;
set_bit(TCON_LINK_MASTER, &tlink->tl_flags);
set_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
- rc = radix_tree_preload(GFP_KERNEL);
- if (rc == -ENOMEM) {
- kfree(tlink);
- goto mount_fail_check;
- }
-
+ cifs_sb->master_tlink = tlink;
spin_lock(&cifs_sb->tlink_tree_lock);
- radix_tree_insert(&cifs_sb->tlink_tree, pSesInfo->linux_uid, tlink);
- radix_tree_tag_set(&cifs_sb->tlink_tree, pSesInfo->linux_uid,
- CIFS_TLINK_MASTER_TAG);
+ tlink_rb_insert(&cifs_sb->tlink_tree, tlink);
spin_unlock(&cifs_sb->tlink_tree_lock);
- radix_tree_preload_end();
queue_delayed_work(system_nrt_wq, &cifs_sb->prune_tlinks,
TLINK_IDLE_EXPIRE);
int
cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb)
{
- int i, ret;
+ struct rb_root *root = &cifs_sb->tlink_tree;
+ struct rb_node *node;
+ struct tcon_link *tlink;
char *tmp;
- struct tcon_link *tlink[8];
- unsigned long index = 0;
cancel_delayed_work_sync(&cifs_sb->prune_tlinks);
- do {
- spin_lock(&cifs_sb->tlink_tree_lock);
- ret = radix_tree_gang_lookup(&cifs_sb->tlink_tree,
- (void **)tlink, index,
- ARRAY_SIZE(tlink));
- /* increment index for next pass */
- if (ret > 0)
- index = tlink[ret - 1]->tl_index + 1;
- for (i = 0; i < ret; i++) {
- cifs_get_tlink(tlink[i]);
- clear_bit(TCON_LINK_IN_TREE, &tlink[i]->tl_flags);
- radix_tree_delete(&cifs_sb->tlink_tree,
- tlink[i]->tl_index);
- }
- spin_unlock(&cifs_sb->tlink_tree_lock);
+ spin_lock(&cifs_sb->tlink_tree_lock);
+ while ((node = rb_first(root))) {
+ tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+ cifs_get_tlink(tlink);
+ clear_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
+ rb_erase(node, root);
- for (i = 0; i < ret; i++)
- cifs_put_tlink(tlink[i]);
- } while (ret != 0);
+ spin_unlock(&cifs_sb->tlink_tree_lock);
+ cifs_put_tlink(tlink);
+ spin_lock(&cifs_sb->tlink_tree_lock);
+ }
+ spin_unlock(&cifs_sb->tlink_tree_lock);
tmp = cifs_sb->prepath;
cifs_sb->prepathlen = 0;
return tcon;
}
-static struct tcon_link *
+static inline struct tcon_link *
cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
{
- struct tcon_link *tlink;
- unsigned int ret;
-
- spin_lock(&cifs_sb->tlink_tree_lock);
- ret = radix_tree_gang_lookup_tag(&cifs_sb->tlink_tree, (void **)&tlink,
- 0, 1, CIFS_TLINK_MASTER_TAG);
- spin_unlock(&cifs_sb->tlink_tree_lock);
-
- /* the master tcon should always be present */
- if (ret == 0)
- BUG();
-
- return tlink;
+ return cifs_sb->master_tlink;
}
struct cifsTconInfo *
return signal_pending(current) ? -ERESTARTSYS : 0;
}
+/* find and return a tlink with given uid */
+static struct tcon_link *
+tlink_rb_search(struct rb_root *root, uid_t uid)
+{
+ struct rb_node *node = root->rb_node;
+ struct tcon_link *tlink;
+
+ while (node) {
+ tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+
+ if (tlink->tl_uid > uid)
+ node = node->rb_left;
+ else if (tlink->tl_uid < uid)
+ node = node->rb_right;
+ else
+ return tlink;
+ }
+ return NULL;
+}
+
+/* insert a tcon_link into the tree */
+static void
+tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink)
+{
+ struct rb_node **new = &(root->rb_node), *parent = NULL;
+ struct tcon_link *tlink;
+
+ while (*new) {
+ tlink = rb_entry(*new, struct tcon_link, tl_rbnode);
+ parent = *new;
+
+ if (tlink->tl_uid > new_tlink->tl_uid)
+ new = &((*new)->rb_left);
+ else
+ new = &((*new)->rb_right);
+ }
+
+ rb_link_node(&new_tlink->tl_rbnode, parent, new);
+ rb_insert_color(&new_tlink->tl_rbnode, root);
+}
+
/*
* Find or construct an appropriate tcon given a cifs_sb and the fsuid of the
* current task.
* If the superblock doesn't refer to a multiuser mount, then just return
* the master tcon for the mount.
*
- * First, search the radix tree for an existing tcon for this fsuid. If one
+ * First, search the rbtree for an existing tcon for this fsuid. If one
* exists, then check to see if it's pending construction. If it is then wait
* for construction to complete. Once it's no longer pending, check to see if
* it failed and either return an error or retry construction, depending on
cifs_sb_tlink(struct cifs_sb_info *cifs_sb)
{
int ret;
- unsigned long fsuid = (unsigned long) current_fsuid();
+ uid_t fsuid = current_fsuid();
struct tcon_link *tlink, *newtlink;
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
return cifs_get_tlink(cifs_sb_master_tlink(cifs_sb));
spin_lock(&cifs_sb->tlink_tree_lock);
- tlink = radix_tree_lookup(&cifs_sb->tlink_tree, fsuid);
+ tlink = tlink_rb_search(&cifs_sb->tlink_tree, fsuid);
if (tlink)
cifs_get_tlink(tlink);
spin_unlock(&cifs_sb->tlink_tree_lock);
newtlink = kzalloc(sizeof(*tlink), GFP_KERNEL);
if (newtlink == NULL)
return ERR_PTR(-ENOMEM);
- newtlink->tl_index = fsuid;
+ newtlink->tl_uid = fsuid;
newtlink->tl_tcon = ERR_PTR(-EACCES);
set_bit(TCON_LINK_PENDING, &newtlink->tl_flags);
set_bit(TCON_LINK_IN_TREE, &newtlink->tl_flags);
cifs_get_tlink(newtlink);
- ret = radix_tree_preload(GFP_KERNEL);
- if (ret != 0) {
- kfree(newtlink);
- return ERR_PTR(ret);
- }
-
spin_lock(&cifs_sb->tlink_tree_lock);
/* was one inserted after previous search? */
- tlink = radix_tree_lookup(&cifs_sb->tlink_tree, fsuid);
+ tlink = tlink_rb_search(&cifs_sb->tlink_tree, fsuid);
if (tlink) {
cifs_get_tlink(tlink);
spin_unlock(&cifs_sb->tlink_tree_lock);
- radix_tree_preload_end();
kfree(newtlink);
goto wait_for_construction;
}
- ret = radix_tree_insert(&cifs_sb->tlink_tree, fsuid, newtlink);
- spin_unlock(&cifs_sb->tlink_tree_lock);
- radix_tree_preload_end();
- if (ret) {
- kfree(newtlink);
- return ERR_PTR(ret);
- }
tlink = newtlink;
+ tlink_rb_insert(&cifs_sb->tlink_tree, tlink);
+ spin_unlock(&cifs_sb->tlink_tree_lock);
} else {
wait_for_construction:
ret = wait_on_bit(&tlink->tl_flags, TCON_LINK_PENDING,
{
struct cifs_sb_info *cifs_sb = container_of(work, struct cifs_sb_info,
prune_tlinks.work);
- struct tcon_link *tlink[8];
- unsigned long now = jiffies;
- unsigned long index = 0;
- int i, ret;
+ struct rb_root *root = &cifs_sb->tlink_tree;
+ struct rb_node *node = rb_first(root);
+ struct rb_node *tmp;
+ struct tcon_link *tlink;
- do {
- spin_lock(&cifs_sb->tlink_tree_lock);
- ret = radix_tree_gang_lookup(&cifs_sb->tlink_tree,
- (void **)tlink, index,
- ARRAY_SIZE(tlink));
- /* increment index for next pass */
- if (ret > 0)
- index = tlink[ret - 1]->tl_index + 1;
- for (i = 0; i < ret; i++) {
- if (test_bit(TCON_LINK_MASTER, &tlink[i]->tl_flags) ||
- atomic_read(&tlink[i]->tl_count) != 0 ||
- time_after(tlink[i]->tl_time + TLINK_IDLE_EXPIRE,
- now)) {
- tlink[i] = NULL;
- continue;
- }
- cifs_get_tlink(tlink[i]);
- clear_bit(TCON_LINK_IN_TREE, &tlink[i]->tl_flags);
- radix_tree_delete(&cifs_sb->tlink_tree,
- tlink[i]->tl_index);
- }
- spin_unlock(&cifs_sb->tlink_tree_lock);
+ /*
+ * Because we drop the spinlock in the loop in order to put the tlink
+ * it's not guarded against removal of links from the tree. The only
+ * places that remove entries from the tree are this function and
+ * umounts. Because this function is non-reentrant and is canceled
+ * before umount can proceed, this is safe.
+ */
+ spin_lock(&cifs_sb->tlink_tree_lock);
+ node = rb_first(root);
+ while (node != NULL) {
+ tmp = node;
+ node = rb_next(tmp);
+ tlink = rb_entry(tmp, struct tcon_link, tl_rbnode);
+
+ if (test_bit(TCON_LINK_MASTER, &tlink->tl_flags) ||
+ atomic_read(&tlink->tl_count) != 0 ||
+ time_after(tlink->tl_time + TLINK_IDLE_EXPIRE, jiffies))
+ continue;
- for (i = 0; i < ret; i++) {
- if (tlink[i] != NULL)
- cifs_put_tlink(tlink[i]);
- }
- } while (ret != 0);
+ cifs_get_tlink(tlink);
+ clear_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
+ rb_erase(tmp, root);
+
+ spin_unlock(&cifs_sb->tlink_tree_lock);
+ cifs_put_tlink(tlink);
+ spin_lock(&cifs_sb->tlink_tree_lock);
+ }
+ spin_unlock(&cifs_sb->tlink_tree_lock);
queue_delayed_work(system_nrt_wq, &cifs_sb->prune_tlinks,
TLINK_IDLE_EXPIRE);
rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
xid, NULL);
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, "Exclusive Oplock granted on inode %p", inode);
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
+ cifs_set_oplock_level(pCifsInode, oplock);
return rc;
}
list_add_tail(&pCifsFile->flist, &pCifsInode->openFileList);
spin_unlock(&cifs_file_list_lock);
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, "Exclusive Oplock inode %p", inode);
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
+ cifs_set_oplock_level(pCifsInode, oplock);
file->private_data = pCifsFile;
return pCifsFile;
*/
void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
{
+ struct inode *inode = cifs_file->dentry->d_inode;
struct cifsTconInfo *tcon = tlink_tcon(cifs_file->tlink);
- struct cifsInodeInfo *cifsi = CIFS_I(cifs_file->dentry->d_inode);
+ struct cifsInodeInfo *cifsi = CIFS_I(inode);
struct cifsLockInfo *li, *tmp;
spin_lock(&cifs_file_list_lock);
if (list_empty(&cifsi->openFileList)) {
cFYI(1, "closing last open instance for inode %p",
cifs_file->dentry->d_inode);
- cifsi->clientCanCacheRead = false;
- cifsi->clientCanCacheAll = false;
+ cifs_set_oplock_level(cifsi, 0);
}
spin_unlock(&cifs_file_list_lock);
rc = filemap_write_and_wait(inode->i_mapping);
mapping_set_error(inode->i_mapping, rc);
- pCifsInode->clientCanCacheAll = false;
- pCifsInode->clientCanCacheRead = false;
if (tcon->unix_ext)
rc = cifs_get_inode_info_unix(&inode,
full_path, inode->i_sb, xid);
invalidate the current end of file on the server
we can not go to the server to get the new inod
info */
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, "Exclusive Oplock granted on inode %p",
- pCifsFile->dentry->d_inode);
- } else if ((oplock & 0xF) == OPLOCK_READ) {
- pCifsInode->clientCanCacheRead = true;
- pCifsInode->clientCanCacheAll = false;
- } else {
- pCifsInode->clientCanCacheRead = false;
- pCifsInode->clientCanCacheAll = false;
- }
+
+ cifs_set_oplock_level(pCifsInode, oplock);
+
cifs_relock_file(pCifsFile);
reopen_error_exit:
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
tcon = tlink_tcon(((struct cifsFileInfo *)file->private_data)->tlink);
-
- if (file->private_data == NULL) {
- rc = -EBADF;
- FreeXid(xid);
- return rc;
- }
netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
if ((tcon->ses->capabilities & CAP_UNIX) &&
ssize_t cifs_user_write(struct file *file, const char __user *write_data,
size_t write_size, loff_t *poffset)
{
+ struct inode *inode = file->f_path.dentry->d_inode;
int rc = 0;
unsigned int bytes_written = 0;
unsigned int total_written;
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
- struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
+ struct cifsInodeInfo *cifsi = CIFS_I(inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
cifs_stats_bytes_written(pTcon, total_written);
- /* since the write may have blocked check these pointers again */
- if ((file->f_path.dentry) && (file->f_path.dentry->d_inode)) {
- struct inode *inode = file->f_path.dentry->d_inode;
/* Do not update local mtime - server will set its actual value on write
- * inode->i_ctime = inode->i_mtime =
- * current_fs_time(inode->i_sb);*/
- if (total_written > 0) {
- spin_lock(&inode->i_lock);
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- i_size_write(file->f_path.dentry->d_inode,
- *poffset);
- spin_unlock(&inode->i_lock);
- }
- mark_inode_dirty_sync(file->f_path.dentry->d_inode);
+ * inode->i_ctime = inode->i_mtime =
+ * current_fs_time(inode->i_sb);*/
+ if (total_written > 0) {
+ spin_lock(&inode->i_lock);
+ if (*poffset > inode->i_size)
+ i_size_write(inode, *poffset);
+ spin_unlock(&inode->i_lock);
}
+ mark_inode_dirty_sync(inode);
+
FreeXid(xid);
return total_written;
}
bool fsuid_only)
{
struct cifsFileInfo *open_file;
- struct cifs_sb_info *cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
+ struct cifs_sb_info *cifs_sb;
bool any_available = false;
int rc;
return NULL;
}
+ cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
+
/* only filter by fsuid on multiuser mounts */
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
fsuid_only = false;
setattr_copy(inode, attrs);
mark_inode_dirty(inode);
- return 0;
cifs_setattr_exit:
kfree(full_path);
struct cifs_sb_info *cifs_sb;
#ifdef CONFIG_CIFS_POSIX
struct cifsFileInfo *pSMBFile = filep->private_data;
- struct cifsTconInfo *tcon = tlink_tcon(pSMBFile->tlink);
+ struct cifsTconInfo *tcon;
__u64 ExtAttrBits = 0;
__u64 ExtAttrMask = 0;
- __u64 caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
+ __u64 caps;
#endif /* CONFIG_CIFS_POSIX */
xid = GetXid();
break;
#ifdef CONFIG_CIFS_POSIX
case FS_IOC_GETFLAGS:
+ if (pSMBFile == NULL)
+ break;
+ tcon = tlink_tcon(pSMBFile->tlink);
+ caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
if (CIFS_UNIX_EXTATTR_CAP & caps) {
- if (pSMBFile == NULL)
- break;
rc = CIFSGetExtAttr(xid, tcon, pSMBFile->netfid,
&ExtAttrBits, &ExtAttrMask);
if (rc == 0)
break;
case FS_IOC_SETFLAGS:
+ if (pSMBFile == NULL)
+ break;
+ tcon = tlink_tcon(pSMBFile->tlink);
+ caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
if (CIFS_UNIX_EXTATTR_CAP & caps) {
if (get_user(ExtAttrBits, (int __user *)arg)) {
rc = -EFAULT;
break;
}
- if (pSMBFile == NULL)
- break;
/* rc= CIFSGetExtAttr(xid,tcon,pSMBFile->netfid,
extAttrBits, &ExtAttrMask);*/
}
cFYI(1, "file id match, oplock break");
pCifsInode = CIFS_I(netfile->dentry->d_inode);
- pCifsInode->clientCanCacheAll = false;
- if (pSMB->OplockLevel == 0)
- pCifsInode->clientCanCacheRead = false;
+ cifs_set_oplock_level(pCifsInode,
+ pSMB->OplockLevel);
/*
* cifs_oplock_break_put() can't be called
* from here. Get reference after queueing
cifs_sb_master_tcon(cifs_sb)->treeName);
}
}
+
+void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock)
+{
+ oplock &= 0xF;
+
+ if (oplock == OPLOCK_EXCLUSIVE) {
+ cinode->clientCanCacheAll = true;
+ cinode->clientCanCacheRead = true;
+ cFYI(1, "Exclusive Oplock granted on inode %p",
+ &cinode->vfs_inode);
+ } else if (oplock == OPLOCK_READ) {
+ cinode->clientCanCacheAll = false;
+ cinode->clientCanCacheRead = true;
+ cFYI(1, "Level II Oplock granted on inode %p",
+ &cinode->vfs_inode);
+ } else {
+ cinode->clientCanCacheAll = false;
+ cinode->clientCanCacheRead = false;
+ }
+}
struct ext4_io_page {
struct page *p_page;
- int p_count;
+ atomic_t p_count;
};
#define MAX_IO_PAGES 128
spinlock_t i_completed_io_lock;
/* current io_end structure for async DIO write*/
ext4_io_end_t *cur_aio_dio;
+ atomic_t i_ioend_count; /* Number of outstanding io_end structs */
/*
* Transactions that contain inode's metadata needed to complete
/* page-io.c */
extern int __init ext4_init_pageio(void);
extern void ext4_exit_pageio(void);
+extern void ext4_ioend_wait(struct inode *);
extern void ext4_free_io_end(ext4_io_end_t *io);
extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags);
extern int ext4_end_io_nolock(ext4_io_end_t *io);
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
+ trace_ext4_begin_ordered_truncate(inode, new_size);
return jbd2_journal_begin_ordered_truncate(
EXT4_SB(inode->i_sb)->s_journal,
&EXT4_I(inode)->jinode,
handle_t *handle;
int err;
+ trace_ext4_evict_inode(inode);
if (inode->i_nlink) {
truncate_inode_pages(&inode->i_data, 0);
goto no_delete;
* will return the blocks that include the delayed allocation
* blocks for this file.
*/
- spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9;
return 0;
int err, ret;
might_sleep();
+ trace_ext4_mark_inode_dirty(inode, _RET_IP_);
err = ext4_reserve_inode_write(handle, inode, &iloc);
if (ext4_handle_valid(handle) &&
EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize &&
* with group lock held. generate_buddy look at
* them with group lock_held
*/
- if (test_opt(sb, DISCARD))
- ext4_issue_discard(sb, block_group, bit, count);
ext4_lock_group(sb, block_group);
mb_clear_bits(bitmap_bh->b_data, bit, count);
mb_free_blocks(inode, &e4b, bit, count);
static struct kmem_cache *io_page_cachep, *io_end_cachep;
+#define WQ_HASH_SZ 37
+#define to_ioend_wq(v) (&ioend_wq[((unsigned long)v) % WQ_HASH_SZ])
+static wait_queue_head_t ioend_wq[WQ_HASH_SZ];
+
int __init ext4_init_pageio(void)
{
+ int i;
+
io_page_cachep = KMEM_CACHE(ext4_io_page, SLAB_RECLAIM_ACCOUNT);
if (io_page_cachep == NULL)
return -ENOMEM;
kmem_cache_destroy(io_page_cachep);
return -ENOMEM;
}
+ for (i = 0; i < WQ_HASH_SZ; i++)
+ init_waitqueue_head(&ioend_wq[i]);
return 0;
}
kmem_cache_destroy(io_page_cachep);
}
+void ext4_ioend_wait(struct inode *inode)
+{
+ wait_queue_head_t *wq = to_ioend_wq(inode);
+
+ wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_ioend_count) == 0));
+}
+
+static void put_io_page(struct ext4_io_page *io_page)
+{
+ if (atomic_dec_and_test(&io_page->p_count)) {
+ end_page_writeback(io_page->p_page);
+ put_page(io_page->p_page);
+ kmem_cache_free(io_page_cachep, io_page);
+ }
+}
+
void ext4_free_io_end(ext4_io_end_t *io)
{
int i;
+ wait_queue_head_t *wq;
BUG_ON(!io);
if (io->page)
put_page(io->page);
- for (i = 0; i < io->num_io_pages; i++) {
- if (--io->pages[i]->p_count == 0) {
- struct page *page = io->pages[i]->p_page;
-
- end_page_writeback(page);
- put_page(page);
- kmem_cache_free(io_page_cachep, io->pages[i]);
- }
- }
+ for (i = 0; i < io->num_io_pages; i++)
+ put_io_page(io->pages[i]);
io->num_io_pages = 0;
- iput(io->inode);
+ wq = to_ioend_wq(io->inode);
+ if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count) &&
+ waitqueue_active(wq))
+ wake_up_all(wq);
kmem_cache_free(io_end_cachep, io);
}
io = kmem_cache_alloc(io_end_cachep, flags);
if (io) {
memset(io, 0, sizeof(*io));
- io->inode = igrab(inode);
- BUG_ON(!io->inode);
+ atomic_inc(&EXT4_I(inode)->i_ioend_count);
+ io->inode = inode;
INIT_WORK(&io->work, ext4_end_io_work);
INIT_LIST_HEAD(&io->list);
}
struct workqueue_struct *wq;
struct inode *inode;
unsigned long flags;
- ext4_fsblk_t err_block;
int i;
BUG_ON(!io_end);
- inode = io_end->inode;
bio->bi_private = NULL;
bio->bi_end_io = NULL;
if (test_bit(BIO_UPTODATE, &bio->bi_flags))
error = 0;
- err_block = bio->bi_sector >> (inode->i_blkbits - 9);
bio_put(bio);
- if (!(inode->i_sb->s_flags & MS_ACTIVE)) {
- pr_err("sb umounted, discard end_io request for inode %lu\n",
- io_end->inode->i_ino);
- ext4_free_io_end(io_end);
- return;
- }
-
- if (error) {
- io_end->flag |= EXT4_IO_END_ERROR;
- ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
- "(offset %llu size %ld starting block %llu)",
- inode->i_ino,
- (unsigned long long) io_end->offset,
- (long) io_end->size,
- (unsigned long long) err_block);
- }
-
for (i = 0; i < io_end->num_io_pages; i++) {
struct page *page = io_end->pages[i]->p_page;
struct buffer_head *bh, *head;
} while (bh != head);
}
- if (--io_end->pages[i]->p_count == 0) {
- struct page *page = io_end->pages[i]->p_page;
-
- end_page_writeback(page);
- put_page(page);
- kmem_cache_free(io_page_cachep, io_end->pages[i]);
- }
+ put_io_page(io_end->pages[i]);
/*
* If this is a partial write which happened to make
if (!partial_write)
SetPageUptodate(page);
}
-
io_end->num_io_pages = 0;
+ inode = io_end->inode;
+
+ if (error) {
+ io_end->flag |= EXT4_IO_END_ERROR;
+ ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
+ "(offset %llu size %ld starting block %llu)",
+ inode->i_ino,
+ (unsigned long long) io_end->offset,
+ (long) io_end->size,
+ (unsigned long long)
+ bio->bi_sector >> (inode->i_blkbits - 9));
+ }
/* Add the io_end to per-inode completed io list*/
spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags);
bio->bi_private = io->io_end = io_end;
bio->bi_end_io = ext4_end_bio;
- io_end->inode = inode;
io_end->offset = (page->index << PAGE_CACHE_SHIFT) + bh_offset(bh);
io->io_bio = bio;
if ((io_end->num_io_pages == 0) ||
(io_end->pages[io_end->num_io_pages-1] != io_page)) {
io_end->pages[io_end->num_io_pages++] = io_page;
- io_page->p_count++;
+ atomic_inc(&io_page->p_count);
}
return 0;
}
return -ENOMEM;
}
io_page->p_page = page;
- io_page->p_count = 0;
+ atomic_set(&io_page->p_count, 1);
get_page(page);
for (bh = head = page_buffers(page), block_start = 0;
* PageWriteback bit from the page to prevent the system from
* wedging later on.
*/
- if (io_page->p_count == 0) {
- put_page(page);
- end_page_writeback(page);
- kmem_cache_free(io_page_cachep, io_page);
- }
+ put_io_page(io_page);
return ret;
}
ei->cur_aio_dio = NULL;
ei->i_sync_tid = 0;
ei->i_datasync_tid = 0;
+ atomic_set(&ei->i_ioend_count, 0);
return &ei->vfs_inode;
}
+static int ext4_drop_inode(struct inode *inode)
+{
+ int drop = generic_drop_inode(inode);
+
+ trace_ext4_drop_inode(inode, drop);
+ return drop;
+}
+
static void ext4_destroy_inode(struct inode *inode)
{
+ ext4_ioend_wait(inode);
if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
ext4_msg(inode->i_sb, KERN_ERR,
"Inode %lu (%p): orphan list check failed!",
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
+ .drop_inode = ext4_drop_inode,
.evict_inode = ext4_evict_inode,
.put_super = ext4_put_super,
.sync_fs = ext4_sync_fs,
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
+ .drop_inode = ext4_drop_inode,
.evict_inode = ext4_evict_inode,
.write_super = ext4_write_super,
.put_super = ext4_put_super,
struct ext4_li_request *elr;
unsigned long next_wakeup;
DEFINE_WAIT(wait);
- int ret;
BUG_ON(NULL == eli);
elr = list_entry(pos, struct ext4_li_request,
lr_request);
- if (time_after_eq(jiffies, elr->lr_next_sched))
- ret = ext4_run_li_request(elr);
-
- if (ret) {
- ret = 0;
- ext4_remove_li_request(elr);
- continue;
+ if (time_after_eq(jiffies, elr->lr_next_sched)) {
+ if (ext4_run_li_request(elr) != 0) {
+ /* error, remove the lazy_init job */
+ ext4_remove_li_request(elr);
+ continue;
+ }
}
if (time_before(elr->lr_next_sched, next_wakeup))
if (freezing(current))
refrigerator();
- if (time_after_eq(jiffies, next_wakeup)) {
+ if ((time_after_eq(jiffies, next_wakeup)) ||
+ (MAX_JIFFY_OFFSET == next_wakeup)) {
cond_resched();
continue;
}
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
+ err = percpu_counter_init(&sbi->s_freeblocks_counter,
+ ext4_count_free_blocks(sb));
+ if (!err) {
+ err = percpu_counter_init(&sbi->s_freeinodes_counter,
+ ext4_count_free_inodes(sb));
+ }
+ if (!err) {
+ err = percpu_counter_init(&sbi->s_dirs_counter,
+ ext4_count_dirs(sb));
+ }
+ if (!err) {
+ err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
+ }
+ if (err) {
+ ext4_msg(sb, KERN_ERR, "insufficient memory");
+ goto failed_mount3;
+ }
+
sbi->s_stripe = ext4_get_stripe_size(sbi);
sbi->s_max_writeback_mb_bump = 128;
}
set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
-no_journal:
- err = percpu_counter_init(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
- if (!err)
- err = percpu_counter_init(&sbi->s_freeinodes_counter,
- ext4_count_free_inodes(sb));
- if (!err)
- err = percpu_counter_init(&sbi->s_dirs_counter,
- ext4_count_dirs(sb));
- if (!err)
- err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
- if (err) {
- ext4_msg(sb, KERN_ERR, "insufficient memory");
- goto failed_mount_wq;
- }
+ /*
+ * The journal may have updated the bg summary counts, so we
+ * need to update the global counters.
+ */
+ percpu_counter_set(&sbi->s_freeblocks_counter,
+ ext4_count_free_blocks(sb));
+ percpu_counter_set(&sbi->s_freeinodes_counter,
+ ext4_count_free_inodes(sb));
+ percpu_counter_set(&sbi->s_dirs_counter,
+ ext4_count_dirs(sb));
+ percpu_counter_set(&sbi->s_dirtyblocks_counter, 0);
+no_journal:
EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
if (!EXT4_SB(sb)->dio_unwritten_wq) {
printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
- percpu_counter_destroy(&sbi->s_freeinodes_counter);
- percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
failed_mount3:
if (sbi->s_flex_groups) {
if (is_vmalloc_addr(sbi->s_flex_groups))
else
kfree(sbi->s_flex_groups);
}
+ percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeinodes_counter);
+ percpu_counter_destroy(&sbi->s_dirs_counter);
+ percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
else
es->s_kbytes_written =
cpu_to_le64(EXT4_SB(sb)->s_kbytes_written);
- if (percpu_counter_initialized(&EXT4_SB(sb)->s_freeblocks_counter))
- ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
- &EXT4_SB(sb)->s_freeblocks_counter));
- if (percpu_counter_initialized(&EXT4_SB(sb)->s_freeinodes_counter))
- es->s_free_inodes_count =
- cpu_to_le32(percpu_counter_sum_positive(
- &EXT4_SB(sb)->s_freeinodes_counter));
+ ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
+ &EXT4_SB(sb)->s_freeblocks_counter));
+ es->s_free_inodes_count =
+ cpu_to_le32(percpu_counter_sum_positive(
+ &EXT4_SB(sb)->s_freeinodes_counter));
sb->s_dirt = 0;
BUFFER_TRACE(sbh, "marking dirty");
mark_buffer_dirty(sbh);
static int ext4_quota_off(struct super_block *sb, int type)
{
- /* Force all delayed allocation blocks to be allocated */
- if (test_opt(sb, DELALLOC)) {
- down_read(&sb->s_umount);
+ /* Force all delayed allocation blocks to be allocated.
+ * Caller already holds s_umount sem */
+ if (test_opt(sb, DELALLOC))
sync_filesystem(sb);
- up_read(&sb->s_umount);
- }
return dquot_quota_off(sb, type);
}
struct gfs2_inum_host *inum)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
- struct gfs2_holder i_gh;
struct inode *inode;
struct dentry *dentry;
- int error;
inode = gfs2_ilookup(sb, inum->no_addr);
if (inode) {
goto out_inode;
}
- error = gfs2_glock_nq_num(sdp, inum->no_addr, &gfs2_inode_glops,
- LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- if (error)
- return ERR_PTR(error);
-
- error = gfs2_check_blk_type(sdp, inum->no_addr, GFS2_BLKST_DINODE);
- if (error)
- goto fail;
-
- inode = gfs2_inode_lookup(sb, DT_UNKNOWN, inum->no_addr, 0);
- if (IS_ERR(inode)) {
- error = PTR_ERR(inode);
- goto fail;
- }
-
- error = gfs2_inode_refresh(GFS2_I(inode));
- if (error) {
- iput(inode);
- goto fail;
- }
-
- /* Pick up the works we bypass in gfs2_inode_lookup */
- if (inode->i_state & I_NEW)
- gfs2_set_iop(inode);
-
- if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
- iput(inode);
- goto fail;
- }
-
- error = -EIO;
- if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM) {
- iput(inode);
- goto fail;
- }
-
- gfs2_glock_dq_uninit(&i_gh);
+ inode = gfs2_lookup_by_inum(sdp, inum->no_addr, &inum->no_formal_ino,
+ GFS2_BLKST_DINODE);
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
out_inode:
dentry = d_obtain_alias(inode);
if (!IS_ERR(dentry))
dentry->d_op = &gfs2_dops;
return dentry;
-fail:
- gfs2_glock_dq_uninit(&i_gh);
- return ERR_PTR(error);
}
static struct dentry *gfs2_fh_to_dentry(struct super_block *sb, struct fid *fid,
{
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
struct gfs2_sbd *sdp = gl->gl_sbd;
- struct gfs2_inode *ip = NULL;
+ struct gfs2_inode *ip;
struct inode *inode;
- u64 no_addr = 0;
+ u64 no_addr = gl->gl_name.ln_number;
+
+ ip = gl->gl_object;
+ /* Note: Unsafe to dereference ip as we don't hold right refs/locks */
- spin_lock(&gl->gl_spin);
- ip = (struct gfs2_inode *)gl->gl_object;
if (ip)
- no_addr = ip->i_no_addr;
- spin_unlock(&gl->gl_spin);
- if (ip) {
inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
- if (inode) {
- d_prune_aliases(inode);
- iput(inode);
- }
+ else
+ inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
+ if (inode && !IS_ERR(inode)) {
+ d_prune_aliases(inode);
+ iput(inode);
}
gfs2_glock_put(gl);
}
return iget5_locked(sb, hash, iget_test, iget_set, &no_addr);
}
-struct gfs2_skip_data {
- u64 no_addr;
- int skipped;
-};
-
-static int iget_skip_test(struct inode *inode, void *opaque)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_skip_data *data = opaque;
-
- if (ip->i_no_addr == data->no_addr) {
- if (inode->i_state & (I_FREEING|I_WILL_FREE)){
- data->skipped = 1;
- return 0;
- }
- return 1;
- }
- return 0;
-}
-
-static int iget_skip_set(struct inode *inode, void *opaque)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_skip_data *data = opaque;
-
- if (data->skipped)
- return 1;
- inode->i_ino = (unsigned long)(data->no_addr);
- ip->i_no_addr = data->no_addr;
- return 0;
-}
-
-static struct inode *gfs2_iget_skip(struct super_block *sb,
- u64 no_addr)
-{
- struct gfs2_skip_data data;
- unsigned long hash = (unsigned long)no_addr;
-
- data.no_addr = no_addr;
- data.skipped = 0;
- return iget5_locked(sb, hash, iget_skip_test, iget_skip_set, &data);
-}
-
/**
* GFS2 lookup code fills in vfs inode contents based on info obtained
* from directory entry inside gfs2_inode_lookup(). This has caused issues
return ERR_PTR(error);
}
-/**
- * gfs2_process_unlinked_inode - Lookup an unlinked inode for reclamation
- * and try to reclaim it by doing iput.
- *
- * This function assumes no rgrp locks are currently held.
- *
- * @sb: The super block
- * no_addr: The inode number
- *
- */
-
-void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+ u64 *no_formal_ino, unsigned int blktype)
{
- struct gfs2_sbd *sdp;
- struct gfs2_inode *ip;
- struct gfs2_glock *io_gl = NULL;
- int error;
- struct gfs2_holder gh;
+ struct super_block *sb = sdp->sd_vfs;
+ struct gfs2_holder i_gh;
struct inode *inode;
+ int error;
- inode = gfs2_iget_skip(sb, no_addr);
-
- if (!inode)
- return;
-
- /* If it's not a new inode, someone's using it, so leave it alone. */
- if (!(inode->i_state & I_NEW)) {
- iput(inode);
- return;
- }
-
- ip = GFS2_I(inode);
- sdp = GFS2_SB(inode);
- ip->i_no_formal_ino = -1;
+ error = gfs2_glock_nq_num(sdp, no_addr, &gfs2_inode_glops,
+ LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+ if (error)
+ return ERR_PTR(error);
- error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
- if (unlikely(error))
+ error = gfs2_check_blk_type(sdp, no_addr, blktype);
+ if (error)
goto fail;
- ip->i_gl->gl_object = ip;
- error = gfs2_glock_get(sdp, no_addr, &gfs2_iopen_glops, CREATE, &io_gl);
- if (unlikely(error))
- goto fail_put;
-
- set_bit(GIF_INVALID, &ip->i_flags);
- error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, LM_FLAG_TRY | GL_EXACT,
- &ip->i_iopen_gh);
- if (unlikely(error))
- goto fail_iopen;
+ inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0);
+ if (IS_ERR(inode))
+ goto fail;
- ip->i_iopen_gh.gh_gl->gl_object = ip;
- gfs2_glock_put(io_gl);
- io_gl = NULL;
+ error = gfs2_inode_refresh(GFS2_I(inode));
+ if (error)
+ goto fail_iput;
- inode->i_mode = DT2IF(DT_UNKNOWN);
+ /* Pick up the works we bypass in gfs2_inode_lookup */
+ if (inode->i_state & I_NEW)
+ gfs2_set_iop(inode);
- /*
- * We must read the inode in order to work out its type in
- * this case. Note that this doesn't happen often as we normally
- * know the type beforehand. This code path only occurs during
- * unlinked inode recovery (where it is safe to do this glock,
- * which is not true in the general case).
- */
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, LM_FLAG_TRY,
- &gh);
- if (unlikely(error))
- goto fail_glock;
+ /* Two extra checks for NFS only */
+ if (no_formal_ino) {
+ error = -ESTALE;
+ if (GFS2_I(inode)->i_no_formal_ino != *no_formal_ino)
+ goto fail_iput;
- /* Inode is now uptodate */
- gfs2_glock_dq_uninit(&gh);
- gfs2_set_iop(inode);
+ error = -EIO;
+ if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM)
+ goto fail_iput;
- /* The iput will cause it to be deleted. */
- iput(inode);
- return;
+ error = 0;
+ }
-fail_glock:
- gfs2_glock_dq(&ip->i_iopen_gh);
-fail_iopen:
- if (io_gl)
- gfs2_glock_put(io_gl);
-fail_put:
- ip->i_gl->gl_object = NULL;
- gfs2_glock_put(ip->i_gl);
fail:
- iget_failed(inode);
- return;
+ gfs2_glock_dq_uninit(&i_gh);
+ return error ? ERR_PTR(error) : inode;
+fail_iput:
+ iput(inode);
+ goto fail;
}
static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
extern void gfs2_set_iop(struct inode *inode);
extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type,
u64 no_addr, u64 no_formal_ino);
-extern void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+ u64 *no_formal_ino,
+ unsigned int blktype);
extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
extern int gfs2_inode_refresh(struct gfs2_inode *ip);
* The inode, if one has been found, in inode.
*/
-static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
- u64 skip)
+static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip)
{
u32 goal = 0, block;
u64 no_addr;
struct gfs2_sbd *sdp = rgd->rd_sbd;
unsigned int n;
+ struct gfs2_glock *gl;
+ struct gfs2_inode *ip;
+ int error;
+ int found = 0;
- for(;;) {
- if (goal >= rgd->rd_data)
- break;
+ while (goal < rgd->rd_data) {
down_write(&sdp->sd_log_flush_lock);
n = 1;
block = rgblk_search(rgd, goal, GFS2_BLKST_UNLINKED,
if (no_addr == skip)
continue;
*last_unlinked = no_addr;
- return no_addr;
+
+ error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &gl);
+ if (error)
+ continue;
+
+ /* If the inode is already in cache, we can ignore it here
+ * because the existing inode disposal code will deal with
+ * it when all refs have gone away. Accessing gl_object like
+ * this is not safe in general. Here it is ok because we do
+ * not dereference the pointer, and we only need an approx
+ * answer to whether it is NULL or not.
+ */
+ ip = gl->gl_object;
+
+ if (ip || queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+ gfs2_glock_put(gl);
+ else
+ found++;
+
+ /* Limit reclaim to sensible number of tasks */
+ if (found > 2*NR_CPUS)
+ return;
}
rgd->rd_flags &= ~GFS2_RDF_CHECK;
- return 0;
+ return;
}
/**
* Try to acquire rgrp in way which avoids contending with others.
*
* Returns: errno
- * unlinked: the block address of an unlinked block to be reclaimed
*/
-static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
- u64 *last_unlinked)
+static int get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd, *begin = NULL;
int loops = 0;
int error, rg_locked;
- *unlinked = 0;
rgd = gfs2_blk2rgrpd(sdp, ip->i_goal);
while (rgd) {
case 0:
if (try_rgrp_fit(rgd, al))
goto out;
- /* If the rg came in already locked, there's no
- way we can recover from a failed try_rgrp_unlink
- because that would require an iput which can only
- happen after the rgrp is unlocked. */
- if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
- *unlinked = try_rgrp_unlink(rgd, last_unlinked,
- ip->i_no_addr);
+ if (rgd->rd_flags & GFS2_RDF_CHECK)
+ try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
- if (*unlinked)
- return -EAGAIN;
/* fall through */
case GLR_TRYFAILED:
rgd = recent_rgrp_next(rgd);
case 0:
if (try_rgrp_fit(rgd, al))
goto out;
- if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
- *unlinked = try_rgrp_unlink(rgd, last_unlinked,
- ip->i_no_addr);
+ if (rgd->rd_flags & GFS2_RDF_CHECK)
+ try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
- if (*unlinked)
- return -EAGAIN;
break;
case GLR_TRYFAILED:
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_alloc *al = ip->i_alloc;
int error = 0;
- u64 last_unlinked = NO_BLOCK, unlinked;
+ u64 last_unlinked = NO_BLOCK;
+ int tries = 0;
if (gfs2_assert_warn(sdp, al->al_requested))
return -EINVAL;
-try_again:
if (hold_rindex) {
/* We need to hold the rindex unless the inode we're using is
the rindex itself, in which case it's already held. */
else if (!sdp->sd_rgrps) /* We may not have the rindex read
in, so: */
error = gfs2_ri_update_special(ip);
+ if (error)
+ return error;
}
- if (error)
- return error;
+ do {
+ error = get_local_rgrp(ip, &last_unlinked);
+ /* If there is no space, flushing the log may release some */
+ if (error)
+ gfs2_log_flush(sdp, NULL);
+ } while (error && tries++ < 3);
- /* Find an rgrp suitable for allocation. If it encounters any unlinked
- dinodes along the way, error will equal -EAGAIN and unlinked will
- contains it block address. We then need to look up that inode and
- try to free it, and try the allocation again. */
- error = get_local_rgrp(ip, &unlinked, &last_unlinked);
if (error) {
if (hold_rindex && ip != GFS2_I(sdp->sd_rindex))
gfs2_glock_dq_uninit(&al->al_ri_gh);
- if (error != -EAGAIN)
- return error;
-
- gfs2_process_unlinked_inode(ip->i_inode.i_sb, unlinked);
- /* regardless of whether or not gfs2_process_unlinked_inode
- was successful, we don't want to repeat it again. */
- last_unlinked = unlinked;
- gfs2_log_flush(sdp, NULL);
- error = 0;
-
- goto try_again;
+ return error;
}
+
/* no error, so we have the rgrp set in the inode's allocation. */
al->al_file = file;
al->al_line = line;
if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
*user = current_user();
if (user_shm_lock(size, *user)) {
- WARN_ONCE(1,
- "Using mlock ulimits for SHM_HUGETLB deprecated\n");
+ printk_once(KERN_WARNING "Using mlock ulimits for SHM_HUGETLB is deprecated\n");
} else {
*user = NULL;
return ERR_PTR(-EPERM);
read_lock(&tasklist_lock);
switch (which) {
case IOPRIO_WHO_PROCESS:
+ rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = set_task_ioprio(p, ioprio);
+ rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
break;
do_each_thread(g, p) {
- if (__task_cred(p)->uid != who)
+ int match;
+
+ rcu_read_lock();
+ match = __task_cred(p)->uid == who;
+ rcu_read_unlock();
+ if (!match)
continue;
ret = set_task_ioprio(p, ioprio);
if (ret)
read_lock(&tasklist_lock);
switch (which) {
case IOPRIO_WHO_PROCESS:
+ rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = get_task_ioprio(p);
+ rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
break;
do_each_thread(g, p) {
- if (__task_cred(p)->uid != user->uid)
+ int match;
+
+ rcu_read_lock();
+ match = __task_cred(p)->uid == user->uid;
+ rcu_read_unlock();
+ if (!match)
continue;
tmpio = get_task_ioprio(p);
if (tmpio < 0)
static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
{
- struct file_lock *fl;
+ struct file_lock *fl, *ret;
struct fasync_struct *new;
- struct inode *inode = filp->f_path.dentry->d_inode;
int error;
fl = lease_alloc(filp, arg);
locks_free_lock(fl);
return -ENOMEM;
}
+ ret = fl;
lock_flocks();
- error = __vfs_setlease(filp, arg, &fl);
+ error = __vfs_setlease(filp, arg, &ret);
if (error) {
unlock_flocks();
locks_free_lock(fl);
goto out_free_fasync;
}
+ if (ret != fl)
+ locks_free_lock(fl);
/*
* fasync_insert_entry() returns the old entry if any.
* inserted it into the fasync list. Clear new so that
* we don't release it here.
*/
- if (!fasync_insert_entry(fd, filp, &fl->fl_fasync, new))
+ if (!fasync_insert_entry(fd, filp, &ret->fl_fasync, new))
new = NULL;
- if (error < 0) {
- /* remove lease just inserted by setlease */
- fl->fl_type = F_UNLCK | F_INPROGRESS;
- fl->fl_break_time = jiffies - 10;
- time_out_leases(inode);
- } else {
- error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
- }
+ error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
unlock_flocks();
out_free_fasync:
/* dev_mtd.c */
#ifdef CONFIG_MTD
-int logfs_get_sb_mtd(struct logfs_super *s, int mtdnr)
+int logfs_get_sb_mtd(struct logfs_super *s, int mtdnr);
#else
static inline int logfs_get_sb_mtd(struct logfs_super *s, int mtdnr)
{
spin_unlock(&clp->cl_lock);
}
-static void nfsd4_register_conn(struct nfsd4_conn *conn)
+static int nfsd4_register_conn(struct nfsd4_conn *conn)
{
conn->cn_xpt_user.callback = nfsd4_conn_lost;
- register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
+ return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
}
static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
{
struct nfsd4_conn *conn;
u32 flags = NFS4_CDFC4_FORE;
+ int ret;
if (ses->se_flags & SESSION4_BACK_CHAN)
flags |= NFS4_CDFC4_BACK;
if (!conn)
return nfserr_jukebox;
nfsd4_hash_conn(conn, ses);
- nfsd4_register_conn(conn);
+ ret = nfsd4_register_conn(conn);
+ if (ret)
+ /* oops; xprt is already down: */
+ nfsd4_conn_lost(&conn->cn_xpt_user);
return nfs_ok;
}
{
struct nfs4_client *clp = ses->se_client;
struct nfsd4_conn *c;
+ int ret;
spin_lock(&clp->cl_lock);
c = __nfsd4_find_conn(new->cn_xprt, ses);
}
__nfsd4_hash_conn(new, ses);
spin_unlock(&clp->cl_lock);
- nfsd4_register_conn(new);
+ ret = nfsd4_register_conn(new);
+ if (ret)
+ /* oops; xprt is already down: */
+ nfsd4_conn_lost(&new->cn_xpt_user);
return;
}
char l_name[OCFS2_LOCK_ID_MAX_LEN];
unsigned int l_ro_holders;
unsigned int l_ex_holders;
- unsigned char l_level;
+ char l_level;
+ char l_requested;
+ char l_blocking;
/* Data packed - type enum ocfs2_lock_type */
unsigned char l_type;
unsigned char l_action;
/* Data packed - enum type ocfs2_unlock_action */
unsigned char l_unlock_action;
- unsigned char l_requested;
- unsigned char l_blocking;
unsigned int l_pending_gen;
spinlock_t l_lock;
static struct dentry *openprom_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
- return mount_single(fs_type, flags, data, openprom_fill_super)
+ return mount_single(fs_type, flags, data, openprom_fill_super);
}
static struct file_system_type openprom_fs_type = {
uptodate = 0;
/*
- * A hole may still be marked uptodate because discard_buffer
- * leaves the flag set.
+ * set_page_dirty dirties all buffers in a page, independent
+ * of their state. The dirty state however is entirely
+ * meaningless for holes (!mapped && uptodate), so skip
+ * buffers covering holes here.
*/
if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
- ASSERT(!buffer_dirty(bh));
imap_valid = 0;
continue;
}
INIT_LIST_HEAD(list);
spin_lock(dwlk);
list_for_each_entry_safe(bp, n, dwq, b_list) {
- trace_xfs_buf_delwri_split(bp, _RET_IP_);
ASSERT(bp->b_flags & XBF_DELWRI);
if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
_XBF_RUN_QUEUES);
bp->b_flags |= XBF_WRITE;
list_move_tail(&bp->b_list, list);
+ trace_xfs_buf_delwri_split(bp, _RET_IP_);
} else
skipped++;
}
if (IS_ERR(dentry))
return PTR_ERR(dentry);
- kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
+ kbuf = kzalloc(al_hreq.buflen, GFP_KERNEL);
if (!kbuf)
goto out_dput;
inode->i_state = I_NEW;
inode_sb_list_add(inode);
- insert_inode_hash(inode);
+ /* make the inode look hashed for the writeback code */
+ hlist_add_fake(&inode->i_hash);
inode->i_mode = ip->i_d.di_mode;
inode->i_nlink = ip->i_d.di_nlink;
mp->m_qflags &= ~XFS_OQUOTA_ENFD;
} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
mp->m_flags |= XFS_MOUNT_DELAYLOG;
- cmn_err(CE_WARN,
- "Enabling EXPERIMENTAL delayed logging feature "
- "- use at your own risk.\n");
} else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) {
mp->m_flags &= ~XFS_MOUNT_DELAYLOG;
} else if (!strcmp(this_char, "ihashsize")) {
if (trylock) {
if (!mutex_trylock(&pag->pag_ici_reclaim_lock)) {
skipped++;
+ xfs_perag_put(pag);
continue;
}
first_index = pag->pag_ici_reclaim_cursor;
* If the file's parent directory is known, take its iolock in exclusive
* mode to prevent two sibling files from racing each other to migrate
* themselves and their parent to different AGs.
+ *
+ * Note that we lock the parent directory iolock inside the child
+ * iolock here. That's fine as we never hold both parent and child
+ * iolock in any other place. This is different from the ilock,
+ * which requires locking of the child after the parent for namespace
+ * operations.
*/
if (pip)
- xfs_ilock(pip, XFS_IOLOCK_EXCL);
+ xfs_ilock(pip, XFS_IOLOCK_EXCL | XFS_IOLOCK_PARENT);
/*
* A new AG needs to be found for the file. If the file's parent
pag = radix_tree_delete(&mp->m_perag_tree, agno);
spin_unlock(&mp->m_perag_lock);
ASSERT(pag);
+ ASSERT(atomic_read(&pag->pag_ref) == 0);
call_rcu(&pag->rcu_head, __xfs_free_perag);
}
}
#define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
#define xfs_trans_apply_dquot_deltas(tp)
#define xfs_trans_unreserve_and_mod_dquots(tp)
-#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags) (0)
-#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl) (0)
+static inline int xfs_trans_reserve_quota_nblks(struct xfs_trans *tp,
+ struct xfs_inode *ip, long nblks, long ninos, uint flags)
+{
+ return 0;
+}
+static inline int xfs_trans_reserve_quota_bydquots(struct xfs_trans *tp,
+ struct xfs_mount *mp, struct xfs_dquot *udqp,
+ struct xfs_dquot *gdqp, long nblks, long nions, uint flags)
+{
+ return 0;
+}
#define xfs_qm_vop_create_dqattach(tp, ip, u, g)
#define xfs_qm_vop_rename_dqattach(it) (0)
#define xfs_qm_vop_chown(tp, ip, old, new) (NULL)
#define xfs_qm_dqdetach(ip)
#define xfs_qm_dqrele(d)
#define xfs_qm_statvfs(ip, s)
-#define xfs_qm_sync(mp, fl) (0)
+static inline int xfs_qm_sync(struct xfs_mount *mp, int flags)
+{
+ return 0;
+}
#define xfs_qm_newmount(mp, a, b) (0)
#define xfs_qm_mount_quotas(mp)
#define xfs_qm_unmount(mp)
-#define xfs_qm_unmount_quotas(mp) (0)
+#define xfs_qm_unmount_quotas(mp)
#endif /* CONFIG_XFS_QUOTA */
#define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \
int st_blksize; /* Optimal block size for I/O. */
int __pad2;
long st_blocks; /* Number 512-byte blocks allocated. */
- int st_atime; /* Time of last access. */
- unsigned int st_atime_nsec;
- int st_mtime; /* Time of last modification. */
- unsigned int st_mtime_nsec;
- int st_ctime; /* Time of last status change. */
- unsigned int st_ctime_nsec;
+ long st_atime; /* Time of last access. */
+ unsigned long st_atime_nsec;
+ long st_mtime; /* Time of last modification. */
+ unsigned long st_mtime_nsec;
+ long st_ctime; /* Time of last status change. */
+ unsigned long st_ctime_nsec;
unsigned int __unused4;
unsigned int __unused5;
};
-#if __BITS_PER_LONG != 64
/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+#if __BITS_PER_LONG != 64 || defined(__ARCH_WANT_STAT64)
struct stat64 {
unsigned long long st_dev; /* Device. */
unsigned long long st_ino; /* File serial number. */
* together with the @destroy function,
* enables driver-specific objects derived from a ttm_buffer_object.
* On successful return, the object kref and list_kref are set to 1.
+ * If a failure occurs, the function will call the @destroy function, or
+ * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is
+ * illegal and will likely cause memory corruption.
+ *
* Returns
* -ENOMEM: Out of memory.
* -EINVAL: Invalid placement flags.
struct ttm_mem_type_manager;
struct ttm_mem_type_manager_func {
+ /**
+ * struct ttm_mem_type_manager member init
+ *
+ * @man: Pointer to a memory type manager.
+ * @p_size: Implementation dependent, but typically the size of the
+ * range to be managed in pages.
+ *
+ * Called to initialize a private range manager. The function is
+ * expected to initialize the man::priv member.
+ * Returns 0 on success, negative error code on failure.
+ */
int (*init)(struct ttm_mem_type_manager *man, unsigned long p_size);
+
+ /**
+ * struct ttm_mem_type_manager member takedown
+ *
+ * @man: Pointer to a memory type manager.
+ *
+ * Called to undo the setup done in init. All allocated resources
+ * should be freed.
+ */
int (*takedown)(struct ttm_mem_type_manager *man);
+
+ /**
+ * struct ttm_mem_type_manager member get_node
+ *
+ * @man: Pointer to a memory type manager.
+ * @bo: Pointer to the buffer object we're allocating space for.
+ * @placement: Placement details.
+ * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+ *
+ * This function should allocate space in the memory type managed
+ * by @man. Placement details if
+ * applicable are given by @placement. If successful,
+ * @mem::mm_node should be set to a non-null value, and
+ * @mem::start should be set to a value identifying the beginning
+ * of the range allocated, and the function should return zero.
+ * If the memory region accomodate the buffer object, @mem::mm_node
+ * should be set to NULL, and the function should return 0.
+ * If a system error occured, preventing the request to be fulfilled,
+ * the function should return a negative error code.
+ *
+ * Note that @mem::mm_node will only be dereferenced by
+ * struct ttm_mem_type_manager functions and optionally by the driver,
+ * which has knowledge of the underlying type.
+ *
+ * This function may not be called from within atomic context, so
+ * an implementation can and must use either a mutex or a spinlock to
+ * protect any data structures managing the space.
+ */
int (*get_node)(struct ttm_mem_type_manager *man,
struct ttm_buffer_object *bo,
struct ttm_placement *placement,
struct ttm_mem_reg *mem);
+
+ /**
+ * struct ttm_mem_type_manager member put_node
+ *
+ * @man: Pointer to a memory type manager.
+ * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+ *
+ * This function frees memory type resources previously allocated
+ * and that are identified by @mem::mm_node and @mem::start. May not
+ * be called from within atomic context.
+ */
void (*put_node)(struct ttm_mem_type_manager *man,
struct ttm_mem_reg *mem);
+
+ /**
+ * struct ttm_mem_type_manager member debug
+ *
+ * @man: Pointer to a memory type manager.
+ * @prefix: Prefix to be used in printout to identify the caller.
+ *
+ * This function is called to print out the state of the memory
+ * type manager to aid debugging of out-of-memory conditions.
+ * It may not be called from within atomic context.
+ */
void (*debug)(struct ttm_mem_type_manager *man, const char *prefix);
};
uint64_t size;
uint32_t available_caching;
uint32_t default_caching;
+ const struct ttm_mem_type_manager_func *func;
+ void *priv;
/*
- * Protected by the bdev->lru_lock.
- * TODO: Consider one lru_lock per ttm_mem_type_manager.
- * Plays ill with list removal, though.
+ * Protected by the global->lru_lock.
*/
- const struct ttm_mem_type_manager_func *func;
- void *priv;
+
struct list_head lru;
};
--- /dev/null
+#ifndef _LINUX_ATOMIC_H
+#define _LINUX_ATOMIC_H
+#include <asm/atomic.h>
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+ int val, c = hint;
+
+ /* sanity test, should be removed by compiler if hint is a constant */
+ if (!hint)
+ return atomic_inc_not_zero(v);
+
+ do {
+ val = atomic_cmpxchg(v, c, c + 1);
+ if (val == c)
+ return 1;
+ c = val;
+ } while (c);
+
+ return 0;
+}
+#endif
+
+#endif /* _LINUX_ATOMIC_H */
#define bio_offset(bio) bio_iovec((bio))->bv_offset
#define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx)
#define bio_sectors(bio) ((bio)->bi_size >> 9)
-#define bio_empty_barrier(bio) \
- ((bio->bi_rw & REQ_HARDBARRIER) && \
- !bio_has_data(bio) && \
- !(bio->bi_rw & REQ_DISCARD))
static inline unsigned int bio_cur_bytes(struct bio *bio)
{
__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
__REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
- __REQ_HARDBARRIER, /* may not be passed by drive either */
__REQ_SYNC, /* request is sync (sync write or read) */
__REQ_META, /* metadata io request */
__REQ_DISCARD, /* request to discard sectors */
#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
-#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
#define REQ_SYNC (1 << __REQ_SYNC)
#define REQ_META (1 << __REQ_META)
#define REQ_DISCARD (1 << __REQ_DISCARD)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
#define REQ_COMMON_MASK \
- (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
- REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
+ REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
#define REQ_CLONE_MASK REQ_COMMON_MASK
#define REQ_UNPLUG (1 << __REQ_UNPLUG)
* it already be started by driver.
*/
#define RQ_NOMERGE_FLAGS \
- (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \
- REQ_FLUSH | REQ_FUA)
+ (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
#define rq_mergeable(rq) \
(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
(((rq)->cmd_flags & REQ_DISCARD) || \
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.9rc2"
+#define REL_VERSION "8.3.9"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 95
};
#define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key)
-#define MFB_WAIT_FOR_VSYNC _IOW('F', 0x20, u_int32_t)
#define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8)
#define MFB_SET_ALPHA 0x80014d00
*/
#define in_nmi() (preempt_count() & NMI_MASK)
-#if defined(CONFIG_PREEMPT)
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL)
# define PREEMPT_INATOMIC_BASE kernel_locked()
-# define PREEMPT_CHECK_OFFSET 1
#else
# define PREEMPT_INATOMIC_BASE 0
+#endif
+
+#if defined(CONFIG_PREEMPT)
+# define PREEMPT_CHECK_OFFSET 1
+#else
# define PREEMPT_CHECK_OFFSET 0
#endif
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/hardirq.h>
#include <asm/cacheflush.h>
*/
/* --- Bit algorithm adapters */
-#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
-#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */
-#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
-#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */
-#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */
-#define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */
-
-/* --- SGI adapters */
-#define I2C_HW_SGI_VINO 0x160000
-
-/* --- SMBus only adapters */
-#define I2C_HW_SMBUS_W9968CF 0x04000d
-#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */
-
-/* --- Miscellaneous adapters */
-#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */
-#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */
#endif /* LINUX_I2C_ID_H */
*/
struct i2c_adapter {
struct module *owner;
- unsigned int id;
+ unsigned int id __deprecated;
unsigned int class; /* classes to allow probing for */
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
/*
* Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
/* Configuration Register1 */
#define ADP5588_AUTO_INC (1 << 7)
#define ADP5588_GPIEM_CFG (1 << 6)
+#define ADP5588_OVR_FLOW_M (1 << 5)
#define ADP5588_INT_CFG (1 << 4)
+#define ADP5588_OVR_FLOW_IEN (1 << 3)
+#define ADP5588_K_LCK_IM (1 << 2)
#define ADP5588_GPI_IEN (1 << 1)
+#define ADP5588_KE_IEN (1 << 0)
/* Interrupt Status Register */
+#define ADP5588_CMP2_INT (1 << 5)
+#define ADP5588_CMP1_INT (1 << 4)
+#define ADP5588_OVR_FLOW_INT (1 << 3)
+#define ADP5588_K_LCK_INT (1 << 2)
#define ADP5588_GPI_INT (1 << 1)
#define ADP5588_KE_INT (1 << 0)
+/* Key Lock and Event Counter Register */
+#define ADP5588_K_LCK_EN (1 << 6)
+#define ADP5588_LCK21 0x30
+#define ADP5588_KEC 0xF
+
#define ADP5588_MAXGPIO 18
#define ADP5588_BANK(offs) ((offs) >> 3)
#define ADP5588_BIT(offs) (1u << ((offs) & 0x7))
}
}
+/**
+ * vlan_get_protocol - get protocol EtherType.
+ * @skb: skbuff to query
+ *
+ * Returns the EtherType of the packet, regardless of whether it is
+ * vlan encapsulated (normal or hardware accelerated) or not.
+ */
+static inline __be16 vlan_get_protocol(const struct sk_buff *skb)
+{
+ __be16 protocol = 0;
+
+ if (vlan_tx_tag_present(skb) ||
+ skb->protocol != cpu_to_be16(ETH_P_8021Q))
+ protocol = skb->protocol;
+ else {
+ __be16 proto, *protop;
+ protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr,
+ h_vlan_encapsulated_proto),
+ sizeof(proto), &proto);
+ if (likely(protop))
+ protocol = *protop;
+ }
+
+ return protocol;
+}
#endif /* __KERNEL__ */
/* VLAN IOCTLs are found in sockios.h */
int __must_check input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
+void input_reset_device(struct input_dev *);
+
int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
int input_open_device(struct input_handle *);
void input_close_device(struct input_handle *);
-int input_flush_device(struct input_handle* handle, struct file* file);
+int input_flush_device(struct input_handle *handle, struct file *file);
void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
void exit_io_context(struct task_struct *task);
struct io_context *get_io_context(gfp_t gfp_flags, int node);
struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc);
#else
static inline void exit_io_context(struct task_struct *task)
{
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
+#include <linux/printk.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
#define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1))
#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ( \
{ \
- typeof(y) __y = y; \
+ const typeof(y) __y = y; \
(((x) + (__y - 1)) / __y) * __y; \
} \
)
*/
#define lower_32_bits(n) ((u32)(n))
-#define KERN_EMERG "<0>" /* system is unusable */
-#define KERN_ALERT "<1>" /* action must be taken immediately */
-#define KERN_CRIT "<2>" /* critical conditions */
-#define KERN_ERR "<3>" /* error conditions */
-#define KERN_WARNING "<4>" /* warning conditions */
-#define KERN_NOTICE "<5>" /* normal but significant condition */
-#define KERN_INFO "<6>" /* informational */
-#define KERN_DEBUG "<7>" /* debug-level messages */
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT "<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT "<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
struct completion;
struct pt_regs;
struct user;
}
#endif
-struct va_format {
- const char *fmt;
- va_list *va;
-};
-
extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(int state);
NORET_TYPE void panic(const char * fmt, ...)
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG "[Firmware Bug]: "
-#define FW_WARN "[Firmware Warn]: "
-#define FW_INFO "[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR "[Hardware Error]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2))) __cold;
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites. Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
-extern int printk_delay_msec;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({ \
- static bool __print_once; \
- \
- if (!__print_once) { \
- __print_once = true; \
- printk(x); \
- } \
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
- __attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
- unsigned int interval_msec) \
- { return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __attribute__ ((format (printf, 1, 2)))
-int no_printk(const char *s, ...) { return 0; }
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
- early_printk(const char *fmt, ...);
-
unsigned long int_sqrt(unsigned long);
-static inline void console_silent(void)
-{
- console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
- if (console_loglevel)
- console_loglevel = 15;
-}
-
extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
#define TAINT_CRAP 10
#define TAINT_FIRMWARE_WORKAROUND 11
-extern void dump_stack(void) __cold;
-
-enum {
- DUMP_PREFIX_NONE,
- DUMP_PREFIX_ADDRESS,
- DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
- int rowsize, int groupsize,
- char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
- int prefix_type, int rowsize, int groupsize,
- const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
- const void *buf, size_t len);
-
extern const char hex_asc[];
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
extern int hex_to_bin(char ch);
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
- printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
- printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
- printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
- printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
- printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
- printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
- printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
- printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
- dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...) ({ \
- static DEFINE_RATELIMIT_STATE(_rs, \
- DEFAULT_RATELIMIT_INTERVAL, \
- DEFAULT_RATELIMIT_BURST); \
- \
- if (__ratelimit(&_rs)) \
- printk(fmt, ##__VA_ARGS__); \
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited pr_warning_ratelimited
-#define pr_notice_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
- ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
- ##__VA_ARGS__); 0; })
-#endif
-
/*
* General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop
--- /dev/null
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5521_H
+#define __LINUX_LP5521_H
+
+/* See Documentation/leds/leds-lp5521.txt */
+
+struct lp5521_led_config {
+ u8 chan_nr;
+ u8 led_current; /* mA x10, 0 if led is not connected */
+ u8 max_current;
+};
+
+#define LP5521_CLOCK_AUTO 0
+#define LP5521_CLOCK_INT 1
+#define LP5521_CLOCK_EXT 2
+
+struct lp5521_platform_data {
+ struct lp5521_led_config *led_config;
+ u8 num_channels;
+ u8 clock_mode;
+ int (*setup_resources)(void);
+ void (*release_resources)(void);
+ void (*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5521_H */
--- /dev/null
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+ u8 chan_nr;
+ u8 led_current; /* mA x10, 0 if led is not connected */
+ u8 max_current;
+};
+
+#define LP5523_CLOCK_AUTO 0
+#define LP5523_CLOCK_INT 1
+#define LP5523_CLOCK_EXT 2
+
+struct lp5523_platform_data {
+ struct lp5523_led_config *led_config;
+ u8 num_channels;
+ u8 clock_mode;
+ int (*setup_resources)(void);
+ void (*release_resources)(void);
+ void (*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5523_H */
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>
+#include <linux/timer.h>
struct device;
/*
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
- /* Activate hardware accelerated blink, delays are in
- * miliseconds and if none is provided then a sensible default
- * should be chosen. The call can adjust the timings if it can't
- * match the values specified exactly. */
+ /*
+ * Activate hardware accelerated blink, delays are in milliseconds
+ * and if both are zero then a sensible default should be chosen.
+ * The call should adjust the timings in that case and if it can't
+ * match the values specified exactly.
+ * Deactivate blinking again when the brightness is set to a fixed
+ * value via the brightness_set() callback.
+ */
int (*blink_set)(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off);
struct list_head node; /* LED Device list */
const char *default_trigger; /* Trigger to use */
+ unsigned long blink_delay_on, blink_delay_off;
+ struct timer_list blink_timer;
+ int blink_brightness;
+
#ifdef CONFIG_LEDS_TRIGGERS
/* Protects the trigger data below */
struct rw_semaphore trigger_lock;
extern void led_classdev_suspend(struct led_classdev *led_cdev);
extern void led_classdev_resume(struct led_classdev *led_cdev);
+/**
+ * led_blink_set - set blinking with software fallback
+ * @led_cdev: the LED to start blinking
+ * @delay_on: the time it should be on (in ms)
+ * @delay_off: the time it should ble off (in ms)
+ *
+ * This function makes the LED blink, attempting to use the
+ * hardware acceleration if possible, but falling back to
+ * software blinking if there is no hardware blinking or if
+ * the LED refuses the passed values.
+ *
+ * Note that if software blinking is active, simply calling
+ * led_cdev->brightness_set() will not stop the blinking,
+ * use led_classdev_brightness_set() instead.
+ */
+extern void led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+/**
+ * led_brightness_set - set LED brightness
+ * @led_cdev: the LED to set
+ * @brightness: the brightness to set it to
+ *
+ * Set an LED's brightness, and, if necessary, cancel the
+ * software blink timer that implements blinking when the
+ * hardware doesn't.
+ */
+extern void led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+
/*
* LED Triggers
*/
#define MMCIF_CE_HOST_STS2 0x0000004C
#define MMCIF_CE_VERSION 0x0000007C
-extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
{
return readl(addr + reg);
}
-extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
{
writel(val, addr + reg);
}
#define SH_MMCIF_BBS 512 /* boot block size */
-extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
unsigned long cmd, unsigned long arg)
{
sh_mmcif_writel(base, MMCIF_CE_INT, 0);
sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
}
-extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
{
unsigned long tmp;
int cnt;
return -1;
}
-extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+static inline int sh_mmcif_boot_cmd(void __iomem *base,
unsigned long cmd, unsigned long arg)
{
sh_mmcif_boot_cmd_send(base, cmd, arg);
return sh_mmcif_boot_cmd_poll(base, 0x00010000);
}
-extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
unsigned int block_nr,
unsigned long *buf)
{
return 0;
}
-extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+static inline int sh_mmcif_boot_do_read(void __iomem *base,
unsigned long first_block,
unsigned long nr_blocks,
void *buf)
return ret;
}
-extern inline void sh_mmcif_boot_init(void __iomem *base)
+static inline void sh_mmcif_boot_init(void __iomem *base)
{
unsigned long tmp;
sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
}
-extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+static inline void sh_mmcif_boot_slurp(void __iomem *base,
unsigned char *buf,
unsigned long no_bytes)
{
static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
{
+ if (WARN_ON(!dev_queue)) {
+ printk(KERN_INFO "netif_stop_queue() cannot be called before "
+ "register_netdev()");
+ return;
+ }
set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
}
int ret;
if (!cond ||
- (ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN) == 1))
+ ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1))
ret = okfn(skb);
return ret;
}
u64 tstamp_running;
u64 tstamp_stopped;
+ /*
+ * timestamp shadows the actual context timing but it can
+ * be safely used in NMI interrupt context. It reflects the
+ * context time as it was when the event was last scheduled in.
+ *
+ * ctx_time already accounts for ctx->timestamp. Therefore to
+ * compute ctx_time for a sample, simply add perf_clock().
+ */
+ u64 shadow_ctx_time;
+
struct perf_event_attr attr;
struct hw_perf_event hw;
--- /dev/null
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define KERN_EMERG "<0>" /* system is unusable */
+#define KERN_ALERT "<1>" /* action must be taken immediately */
+#define KERN_CRIT "<2>" /* critical conditions */
+#define KERN_ERR "<3>" /* error conditions */
+#define KERN_WARNING "<4>" /* warning conditions */
+#define KERN_NOTICE "<5>" /* normal but significant condition */
+#define KERN_INFO "<6>" /* informational */
+#define KERN_DEBUG "<7>" /* debug-level messages */
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT "<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+ const char *fmt;
+ va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR "[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+ __attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites. Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({ \
+ static bool __print_once; \
+ \
+ if (!__print_once) { \
+ __print_once = true; \
+ printk(x); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+ __attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+ unsigned int interval_msec) \
+ { return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+ early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+ console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+ if (console_loglevel)
+ console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+ DUMP_PREFIX_NONE,
+ DUMP_PREFIX_ADDRESS,
+ DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+ int rowsize, int groupsize,
+ char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+ int prefix_type, int rowsize, int groupsize,
+ const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+ const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ \
+ if (__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+#endif
int pwm_id;
unsigned int max_brightness;
unsigned int dft_brightness;
+ unsigned int lth_brightness;
unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
* needed for RCU lookups (because root->height is unreliable). The only
* time callers need worry about this is when doing a lookup_slot under
* RCU.
+ *
+ * Indirect pointer in fact is also used to tag the last pointer of a node
+ * when it is shrunk, before we rcu free the node. See shrink code for
+ * details.
*/
#define RADIX_TREE_INDIRECT_PTR 1
-#define RADIX_TREE_RETRY ((void *)-1UL)
-
-static inline void *radix_tree_ptr_to_indirect(void *ptr)
-{
- return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
-}
-static inline void *radix_tree_indirect_to_ptr(void *ptr)
-{
- return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
-}
#define radix_tree_indirect_to_ptr(ptr) \
radix_tree_indirect_to_ptr((void __force *)(ptr))
* removed.
*
* For use with radix_tree_lookup_slot(). Caller must hold tree at least read
- * locked across slot lookup and dereference. More likely, will be used with
- * radix_tree_replace_slot(), as well, so caller will hold tree write locked.
+ * locked across slot lookup and dereference. Not required if write lock is
+ * held (ie. items cannot be concurrently inserted).
+ *
+ * radix_tree_deref_retry must be used to confirm validity of the pointer if
+ * only the read lock is held.
*/
static inline void *radix_tree_deref_slot(void **pslot)
{
- void *ret = rcu_dereference(*pslot);
- if (unlikely(radix_tree_is_indirect_ptr(ret)))
- ret = RADIX_TREE_RETRY;
- return ret;
+ return rcu_dereference(*pslot);
}
+
+/**
+ * radix_tree_deref_retry - check radix_tree_deref_slot
+ * @arg: pointer returned by radix_tree_deref_slot
+ * Returns: 0 if retry is not required, otherwise retry is required
+ *
+ * radix_tree_deref_retry must be used with radix_tree_deref_slot.
+ */
+static inline int radix_tree_deref_retry(void *arg)
+{
+ return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
+}
+
/**
* radix_tree_replace_slot - replace item in a slot
* @pslot: pointer to slot, returned by radix_tree_lookup_slot
#define _LINUX_RESOURCE_H
#include <linux/time.h>
+#include <linux/types.h>
/*
* Resource control/accounting header file for linux
extern int cap_task_setscheduler(struct task_struct *p);
extern int cap_task_setioprio(struct task_struct *p, int ioprio);
extern int cap_task_setnice(struct task_struct *p, int nice);
-extern int cap_syslog(int type, bool from_file);
extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
struct msghdr;
int (*sysctl) (struct ctl_table *table, int op);
int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
int (*quota_on) (struct dentry *dentry);
- int (*syslog) (int type, bool from_file);
+ int (*syslog) (int type);
int (*settime) (struct timespec *ts, struct timezone *tz);
int (*vm_enough_memory) (struct mm_struct *mm, long pages);
int security_sysctl(struct ctl_table *table, int op);
int security_quotactl(int cmds, int type, int id, struct super_block *sb);
int security_quota_on(struct dentry *dentry);
-int security_syslog(int type, bool from_file);
+int security_syslog(int type);
int security_settime(struct timespec *ts, struct timezone *tz);
int security_vm_enough_memory(long pages);
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
return 0;
}
-static inline int security_syslog(int type, bool from_file)
+static inline int security_syslog(int type)
{
- return cap_syslog(type, from_file);
+ return 0;
}
static inline int security_settime(struct timespec *ts, struct timezone *tz)
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_round_parent(struct clk *clk, unsigned long target,
+ unsigned long *best_freq, unsigned long *parent_freq,
+ unsigned int div_min, unsigned int div_max);
+
#define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags) \
{ \
.parent = _parent, \
unsigned int nr_subgroups;
};
-#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a)
+#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
#define INTC_HW_DESC(vectors, groups, mask_regs, \
prio_regs, sense_regs, ack_regs) \
char *name;
long channel_offset;
int timer_bit;
- char *clk;
unsigned long clockevent_rating;
unsigned long clocksource_rating;
};
struct net *xpt_net;
};
-static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
{
spin_lock(&xpt->xpt_lock);
- list_add(&u->list, &xpt->xpt_users);
+ list_del_init(&u->list);
spin_unlock(&xpt->xpt_lock);
}
-static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
{
spin_lock(&xpt->xpt_lock);
- list_del_init(&u->list);
+ if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
+ /*
+ * The connection is about to be deleted soon (or,
+ * worse, may already be deleted--in which case we've
+ * already notified the xpt_users).
+ */
+ spin_unlock(&xpt->xpt_lock);
+ return -ENOTCONN;
+ }
+ list_add(&u->list, &xpt->xpt_users);
spin_unlock(&xpt->xpt_lock);
+ return 0;
}
int svc_reg_xprt_class(struct svc_xprt_class *);
#define N_V253 19 /* Codec control over voice modem */
#define N_CAIF 20 /* CAIF protocol for talking to modems */
#define N_GSM0710 21 /* GSM 0710 Mux */
-#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */
+#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* @disconnect: Called when the interface is no longer accessible, usually
* because its device has been (or is being) disconnected or the
* driver module is being unloaded.
- * @ioctl: Used for drivers that want to talk to userspace through
+ * @unlocked_ioctl: Used for drivers that want to talk to userspace through
* the "usbfs" filesystem. This lets devices provide ways to
* expose information to user space regardless of where they
* do (or don't) show up otherwise in the filesystem.
/* A GPIO controlling VRSEL in Blackfin */
unsigned int gpio_vrsel;
unsigned int gpio_vrsel_active;
+ /* musb CLKIN in Blackfin in MHZ */
+ unsigned char clkin;
#endif
};
* @sockaddr: Socket address to connect.
* @priority: Priority of the connection.
* @link_selector: Link selector (high bandwidth or low latency)
- * @link_name: Name of the CAIF Link Layer to use.
+ * @ifindex: kernel index of the interface.
* @param: Connect Request parameters (CAIF_SO_REQ_PARAM).
*
* This struct is used when connecting a CAIF channel.
struct sockaddr_caif sockaddr;
enum caif_channel_priority priority;
enum caif_link_selector link_selector;
- char link_name[16];
+ int ifindex;
struct caif_param param;
};
wait_queue_head_t wait;
spinlock_t lock;
bool flow_stop;
+ bool slave;
+ bool slave_talked;
#ifdef CONFIG_DEBUG_FS
enum cfspi_state dbg_state;
u16 pcmd;
enum cfcnfg_phy_preference phy_pref);
/**
- * cfcnfg_get_named() - Get the Physical Identifier of CAIF Link Layer
+ * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
+ * it matches caif physical id with the kernel interface id.
* @cnfg: Configuration object
- * @name: Name of the Physical Layer (Caif Link Layer)
+ * @ifi: ifindex obtained from socket.c bindtodevice.
*/
-int cfcnfg_get_named(struct cfcnfg *cnfg, char *name);
-
+int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
#endif /* CFCNFG_H_ */
extern int decnet_dr_count;
extern int decnet_no_fc_max_cwnd;
-extern int sysctl_decnet_mem[3];
+extern long sysctl_decnet_mem[3];
extern int sysctl_decnet_wmem[3];
extern int sysctl_decnet_rmem[3];
#define _NET_DST_OPS_H
#include <linux/types.h>
#include <linux/percpu_counter.h>
+#include <linux/cache.h>
struct dst_entry;
struct kmem_cachep;
*
* Returns the first attribute which matches the specified type.
*/
-static inline struct nlattr *nlmsg_find_attr(struct nlmsghdr *nlh,
+static inline struct nlattr *nlmsg_find_attr(const struct nlmsghdr *nlh,
int hdrlen, int attrtype)
{
return nla_find(nlmsg_attrdata(nlh, hdrlen),
/* Memory pressure */
void (*enter_memory_pressure)(struct sock *sk);
- atomic_t *memory_allocated; /* Current allocated memory. */
+ atomic_long_t *memory_allocated; /* Current allocated memory. */
struct percpu_counter *sockets_allocated; /* Current number of sockets. */
/*
* Pressure flag: try to collapse.
* is strict, actions are advisory and have some latency.
*/
int *memory_pressure;
- int *sysctl_mem;
+ long *sysctl_mem;
int *sysctl_wmem;
int *sysctl_rmem;
int max_header;
extern int sysctl_tcp_reordering;
extern int sysctl_tcp_ecn;
extern int sysctl_tcp_dsack;
-extern int sysctl_tcp_mem[3];
+extern long sysctl_tcp_mem[3];
extern int sysctl_tcp_wmem[3];
extern int sysctl_tcp_rmem[3];
extern int sysctl_tcp_app_win;
extern int sysctl_tcp_thin_linear_timeouts;
extern int sysctl_tcp_thin_dupack;
-extern atomic_t tcp_memory_allocated;
+extern atomic_long_t tcp_memory_allocated;
extern struct percpu_counter tcp_sockets_allocated;
extern int tcp_memory_pressure;
}
if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
- atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
+ atomic_long_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
return true;
return false;
}
extern struct proto udp_prot;
-extern atomic_t udp_memory_allocated;
+extern atomic_long_t udp_memory_allocated;
/* sysctl variables for udp */
-extern int sysctl_udp_mem[3];
+extern long sysctl_udp_mem[3];
extern int sysctl_udp_rmem_min;
extern int sysctl_udp_wmem_min;
(unsigned long) __entry->dir, __entry->mode)
);
+TRACE_EVENT(ext4_evict_inode,
+ TP_PROTO(struct inode *inode),
+
+ TP_ARGS(inode),
+
+ TP_STRUCT__entry(
+ __field( int, dev_major )
+ __field( int, dev_minor )
+ __field( ino_t, ino )
+ __field( int, nlink )
+ ),
+
+ TP_fast_assign(
+ __entry->dev_major = MAJOR(inode->i_sb->s_dev);
+ __entry->dev_minor = MINOR(inode->i_sb->s_dev);
+ __entry->ino = inode->i_ino;
+ __entry->nlink = inode->i_nlink;
+ ),
+
+ TP_printk("dev %d,%d ino %lu nlink %d",
+ __entry->dev_major, __entry->dev_minor,
+ (unsigned long) __entry->ino, __entry->nlink)
+);
+
+TRACE_EVENT(ext4_drop_inode,
+ TP_PROTO(struct inode *inode, int drop),
+
+ TP_ARGS(inode, drop),
+
+ TP_STRUCT__entry(
+ __field( int, dev_major )
+ __field( int, dev_minor )
+ __field( ino_t, ino )
+ __field( int, drop )
+ ),
+
+ TP_fast_assign(
+ __entry->dev_major = MAJOR(inode->i_sb->s_dev);
+ __entry->dev_minor = MINOR(inode->i_sb->s_dev);
+ __entry->ino = inode->i_ino;
+ __entry->drop = drop;
+ ),
+
+ TP_printk("dev %d,%d ino %lu drop %d",
+ __entry->dev_major, __entry->dev_minor,
+ (unsigned long) __entry->ino, __entry->drop)
+);
+
+TRACE_EVENT(ext4_mark_inode_dirty,
+ TP_PROTO(struct inode *inode, unsigned long IP),
+
+ TP_ARGS(inode, IP),
+
+ TP_STRUCT__entry(
+ __field( int, dev_major )
+ __field( int, dev_minor )
+ __field( ino_t, ino )
+ __field(unsigned long, ip )
+ ),
+
+ TP_fast_assign(
+ __entry->dev_major = MAJOR(inode->i_sb->s_dev);
+ __entry->dev_minor = MINOR(inode->i_sb->s_dev);
+ __entry->ino = inode->i_ino;
+ __entry->ip = IP;
+ ),
+
+ TP_printk("dev %d,%d ino %lu caller %pF",
+ __entry->dev_major, __entry->dev_minor,
+ (unsigned long) __entry->ino, (void *)__entry->ip)
+);
+
+TRACE_EVENT(ext4_begin_ordered_truncate,
+ TP_PROTO(struct inode *inode, loff_t new_size),
+
+ TP_ARGS(inode, new_size),
+
+ TP_STRUCT__entry(
+ __field( int, dev_major )
+ __field( int, dev_minor )
+ __field( ino_t, ino )
+ __field( loff_t, new_size )
+ ),
+
+ TP_fast_assign(
+ __entry->dev_major = MAJOR(inode->i_sb->s_dev);
+ __entry->dev_minor = MINOR(inode->i_sb->s_dev);
+ __entry->ino = inode->i_ino;
+ __entry->new_size = new_size;
+ ),
+
+ TP_printk("dev %d,%d ino %lu new_size %lld",
+ __entry->dev_major, __entry->dev_minor,
+ (unsigned long) __entry->ino,
+ (long long) __entry->new_size)
+);
+
DECLARE_EVENT_CLASS(ext4__write_begin,
TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
tty = sig->tty;
sig->tty = NULL;
} else {
+ /*
+ * This can only happen if the caller is de_thread().
+ * FIXME: this is the temporary hack, we should teach
+ * posix-cpu-timers to handle this case correctly.
+ */
+ if (unlikely(has_group_leader_pid(tsk)))
+ posix_cpu_timers_exit_group(tsk);
+
/*
* If there is any task waiting for the group exit
* then notify it:
account_global_scheduler_latency(tsk, &lat);
- /*
- * short term hack; if we're > 32 we stop; future we recycle:
- */
- tsk->latency_record_count++;
- if (tsk->latency_record_count >= LT_SAVECOUNT)
- goto out_unlock;
-
- for (i = 0; i < LT_SAVECOUNT; i++) {
+ for (i = 0; i < tsk->latency_record_count; i++) {
struct latency_record *mylat;
int same = 1;
}
}
+ /*
+ * short term hack; if we're > 32 we stop; future we recycle:
+ */
+ if (tsk->latency_record_count >= LT_SAVECOUNT)
+ goto out_unlock;
+
/* Allocated a new one: */
- i = tsk->latency_record_count;
+ i = tsk->latency_record_count++;
memcpy(&tsk->latency_record[i], &lat, sizeof(struct latency_record));
out_unlock:
event->tstamp_running += ctx->time - event->tstamp_stopped;
+ event->shadow_ctx_time = ctx->time - ctx->timestamp;
+
if (!is_software_event(event))
cpuctx->active_oncpu++;
ctx->nr_active++;
}
static void perf_output_read_one(struct perf_output_handle *handle,
- struct perf_event *event)
+ struct perf_event *event,
+ u64 enabled, u64 running)
{
u64 read_format = event->attr.read_format;
u64 values[4];
values[n++] = perf_event_count(event);
if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
- values[n++] = event->total_time_enabled +
+ values[n++] = enabled +
atomic64_read(&event->child_total_time_enabled);
}
if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
- values[n++] = event->total_time_running +
+ values[n++] = running +
atomic64_read(&event->child_total_time_running);
}
if (read_format & PERF_FORMAT_ID)
* XXX PERF_FORMAT_GROUP vs inherited events seems difficult.
*/
static void perf_output_read_group(struct perf_output_handle *handle,
- struct perf_event *event)
+ struct perf_event *event,
+ u64 enabled, u64 running)
{
struct perf_event *leader = event->group_leader, *sub;
u64 read_format = event->attr.read_format;
values[n++] = 1 + leader->nr_siblings;
if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
- values[n++] = leader->total_time_enabled;
+ values[n++] = enabled;
if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
- values[n++] = leader->total_time_running;
+ values[n++] = running;
if (leader != event)
leader->pmu->read(leader);
}
}
+#define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\
+ PERF_FORMAT_TOTAL_TIME_RUNNING)
+
static void perf_output_read(struct perf_output_handle *handle,
struct perf_event *event)
{
+ u64 enabled = 0, running = 0, now, ctx_time;
+ u64 read_format = event->attr.read_format;
+
+ /*
+ * compute total_time_enabled, total_time_running
+ * based on snapshot values taken when the event
+ * was last scheduled in.
+ *
+ * we cannot simply called update_context_time()
+ * because of locking issue as we are called in
+ * NMI context
+ */
+ if (read_format & PERF_FORMAT_TOTAL_TIMES) {
+ now = perf_clock();
+ ctx_time = event->shadow_ctx_time + now;
+ enabled = ctx_time - event->tstamp_enabled;
+ running = ctx_time - event->tstamp_running;
+ }
+
if (event->attr.read_format & PERF_FORMAT_GROUP)
- perf_output_read_group(handle, event);
+ perf_output_read_group(handle, event, enabled, running);
else
- perf_output_read_one(handle, event);
+ perf_output_read_one(handle, event, enabled, running);
}
void perf_output_sample(struct perf_output_handle *handle,
}
#endif
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
int do_syslog(int type, char __user *buf, int len, bool from_file)
{
unsigned i, j, limit, count;
char c;
int error = 0;
- error = security_syslog(type, from_file);
+ /*
+ * If this is from /proc/kmsg we only do the capabilities checks
+ * at open time.
+ */
+ if (type == SYSLOG_ACTION_OPEN || !from_file) {
+ if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if ((type != SYSLOG_ACTION_READ_ALL &&
+ type != SYSLOG_ACTION_SIZE_BUFFER) &&
+ !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ }
+
+ error = security_syslog(type);
if (error)
return error;
int clean_sort_range(struct range *range, int az)
{
- int i, j, k = az - 1, nr_range = 0;
+ int i, j, k = az - 1, nr_range = az;
for (i = 0; i < k; i++) {
if (range[i].end)
*/
static struct page **relay_alloc_page_array(unsigned int n_pages)
{
- struct page **array;
- size_t pa_size = n_pages * sizeof(struct page *);
-
- if (pa_size > PAGE_SIZE) {
- array = vmalloc(pa_size);
- if (array)
- memset(array, 0, pa_size);
- } else {
- array = kzalloc(pa_size, GFP_KERNEL);
- }
- return array;
+ const size_t pa_size = n_pages * sizeof(struct page *);
+ if (pa_size > PAGE_SIZE)
+ return vzalloc(pa_size);
+ return kzalloc(pa_size, GFP_KERNEL);
}
/*
.extra2 = &ten_thousand,
},
#endif
+ {
+ .procname = "dmesg_restrict",
+ .data = &dmesg_restrict,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
{
.procname = "ngroups_max",
.data = &ngroups_max,
static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
BLK_TC_ACT(BLK_TC_WRITE) };
-#define BLK_TC_HARDBARRIER BLK_TC_BARRIER
#define BLK_TC_RAHEAD BLK_TC_AHEAD
/* The ilog2() calls fall out because they're constant */
return;
what |= ddir_act[rw & WRITE];
- what |= MASK_TC_BIT(rw, HARDBARRIER);
what |= MASK_TC_BIT(rw, SYNC);
what |= MASK_TC_BIT(rw, RAHEAD);
what |= MASK_TC_BIT(rw, META);
if (rw & REQ_RAHEAD)
rwbs[i++] = 'A';
- if (rw & REQ_HARDBARRIER)
- rwbs[i++] = 'B';
if (rw & REQ_SYNC)
rwbs[i++] = 'S';
if (rw & REQ_META)
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
#endif
-static int __initdata no_watchdog;
+static int no_watchdog;
/* boot commands */
};
static DEFINE_PER_CPU(struct radix_tree_preload, radix_tree_preloads) = { 0, };
+static inline void *ptr_to_indirect(void *ptr)
+{
+ return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
+}
+
+static inline void *indirect_to_ptr(void *ptr)
+{
+ return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
+}
+
static inline gfp_t root_gfp_mask(struct radix_tree_root *root)
{
return root->gfp_mask & __GFP_BITS_MASK;
return -ENOMEM;
/* Increase the height. */
- node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
+ node->slots[0] = indirect_to_ptr(root->rnode);
/* Propagate the aggregated tag info into the new root */
for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
newheight = root->height+1;
node->height = newheight;
node->count = 1;
- node = radix_tree_ptr_to_indirect(node);
+ node = ptr_to_indirect(node);
rcu_assign_pointer(root->rnode, node);
root->height = newheight;
} while (height > root->height);
return error;
}
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
height = root->height;
shift = (height-1) * RADIX_TREE_MAP_SHIFT;
rcu_assign_pointer(node->slots[offset], slot);
node->count++;
} else
- rcu_assign_pointer(root->rnode,
- radix_tree_ptr_to_indirect(slot));
+ rcu_assign_pointer(root->rnode, ptr_to_indirect(slot));
}
/* Go a level down */
return NULL;
return is_slot ? (void *)&root->rnode : node;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
height = node->height;
if (index > radix_tree_maxindex(height))
height--;
} while (height > 0);
- return is_slot ? (void *)slot:node;
+ return is_slot ? (void *)slot : indirect_to_ptr(node);
}
/**
height = root->height;
BUG_ON(index > radix_tree_maxindex(height));
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
while (height > 0) {
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
pathp->node = NULL;
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
while (height > 0) {
int offset;
if (!radix_tree_is_indirect_ptr(node))
return (index == 0);
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
height = node->height;
if (index > radix_tree_maxindex(height))
}
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
/*
* we fill the path from (root->height - 2) to 0, leaving the index at
results[0] = node;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
slot = *(((void ***)results)[ret + i]);
if (!slot)
continue;
- results[ret + nr_found] = rcu_dereference_raw(slot);
+ results[ret + nr_found] =
+ indirect_to_ptr(rcu_dereference_raw(slot));
nr_found++;
}
ret += nr_found;
results[0] = (void **)&root->rnode;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
results[0] = node;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
slot = *(((void ***)results)[ret + i]);
if (!slot)
continue;
- results[ret + nr_found] = rcu_dereference_raw(slot);
+ results[ret + nr_found] =
+ indirect_to_ptr(rcu_dereference_raw(slot));
nr_found++;
}
ret += nr_found;
results[0] = (void **)&root->rnode;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
void *newptr;
BUG_ON(!radix_tree_is_indirect_ptr(to_free));
- to_free = radix_tree_indirect_to_ptr(to_free);
+ to_free = indirect_to_ptr(to_free);
/*
* The candidate node has more than one child, or its child
/*
* We don't need rcu_assign_pointer(), since we are simply
- * moving the node from one part of the tree to another. If
- * it was safe to dereference the old pointer to it
+ * moving the node from one part of the tree to another: if it
+ * was safe to dereference the old pointer to it
* (to_free->slots[0]), it will be safe to dereference the new
- * one (root->rnode).
+ * one (root->rnode) as far as dependent read barriers go.
*/
newptr = to_free->slots[0];
if (root->height > 1)
- newptr = radix_tree_ptr_to_indirect(newptr);
+ newptr = ptr_to_indirect(newptr);
root->rnode = newptr;
root->height--;
+
+ /*
+ * We have a dilemma here. The node's slot[0] must not be
+ * NULLed in case there are concurrent lookups expecting to
+ * find the item. However if this was a bottom-level node,
+ * then it may be subject to the slot pointer being visible
+ * to callers dereferencing it. If item corresponding to
+ * slot[0] is subsequently deleted, these callers would expect
+ * their slot to become empty sooner or later.
+ *
+ * For example, lockless pagecache will look up a slot, deref
+ * the page pointer, and if the page is 0 refcount it means it
+ * was concurrently deleted from pagecache so try the deref
+ * again. Fortunately there is already a requirement for logic
+ * to retry the entire slot lookup -- the indirect pointer
+ * problem (replacing direct root node with an indirect pointer
+ * also results in a stale slot). So tag the slot as indirect
+ * to force callers to retry.
+ */
+ if (root->height == 0)
+ *((unsigned long *)&to_free->slots[0]) |=
+ RADIX_TREE_INDIRECT_PTR;
+
radix_tree_node_free(to_free);
}
}
root->rnode = NULL;
goto out;
}
- slot = radix_tree_indirect_to_ptr(slot);
+ slot = indirect_to_ptr(slot);
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
pathp->node = NULL;
radix_tree_node_free(to_free);
if (pathp->node->count) {
- if (pathp->node ==
- radix_tree_indirect_to_ptr(root->rnode))
+ if (pathp->node == indirect_to_ptr(root->rnode))
radix_tree_shrink(root);
goto out;
}
pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
if (pagep) {
page = radix_tree_deref_slot(pagep);
- if (unlikely(!page || page == RADIX_TREE_RETRY))
+ if (unlikely(!page))
+ goto out;
+ if (radix_tree_deref_retry(page))
goto repeat;
if (!page_cache_get_speculative(page))
goto repeat;
}
}
+out:
rcu_read_unlock();
return page;
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page)) {
+ if (ret)
+ start = pages[ret-1]->index;
goto restart;
+ }
if (!page_cache_get_speculative(page))
goto repeat;
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page))
goto restart;
if (page->mapping == NULL || page->index != index)
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page))
goto restart;
if (!page_cache_get_speculative(page))
goto page_not_up_to_date;
if (!trylock_page(page))
goto page_not_up_to_date;
+ /* Did it get truncated before we got the lock? */
+ if (!page->mapping)
+ goto page_not_up_to_date_locked;
if (!mapping->a_ops->is_partially_uptodate(page,
desc, offset))
goto page_not_up_to_date_locked;
goto no_cached_page;
}
- if (!lock_page_or_retry(page, vma->vm_mm, vmf->flags))
+ if (!lock_page_or_retry(page, vma->vm_mm, vmf->flags)) {
+ page_cache_release(page);
return ret | VM_FAULT_RETRY;
+ }
/* Did it get truncated? */
if (unlikely(page->mapping != mapping)) {
memset(mem, 0, size);
mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
- if (!mem->stat) {
- if (size < PAGE_SIZE)
- kfree(mem);
- else
- vfree(mem);
- mem = NULL;
- }
+ if (!mem->stat)
+ goto out_free;
spin_lock_init(&mem->pcp_counter_lock);
return mem;
+
+out_free:
+ if (size < PAGE_SIZE)
+ kfree(mem);
+ else
+ vfree(mem);
+ return NULL;
}
/*
mmu_notifier_invalidate_range_end(mm, start, end);
vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
vm_stat_account(mm, newflags, vma->vm_file, nrpages);
+ perf_event_mmap(vma);
return 0;
fail:
error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
if (error)
goto out;
- perf_event_mmap(vma);
nstart = tmp;
if (nstart < prev->vm_end)
kfree(n);
kfree(s);
}
+err:
up_write(&slub_lock);
-err:
if (flags & SLAB_PANIC)
panic("Cannot create slabcache %s\n", name);
else
x += sprintf(buf + x, " N%d=%lu",
node, nodes[node]);
#endif
+ up_read(&slub_lock);
kfree(nodes);
return x + sprintf(buf + x, "\n");
}
* back off and wait for congestion to clear because further reclaim
* will encounter the same problem
*/
- if (nr_dirty == nr_congested)
+ if (nr_dirty == nr_congested && nr_dirty != 0)
zone_set_flag(zone, ZONE_CONGESTED);
free_page_list(&free_pages);
v[PGPGIN] /= 2; /* sectors -> kbytes */
v[PGPGOUT] /= 2;
#endif
- return m->private + *pos;
+ return (unsigned long *)m->private + *pos;
}
static void *vmstat_next(struct seq_file *m, void *arg, loff_t *pos)
ax25_cb *ax25;
int err = 0;
+ memset(fsa, 0, sizeof(fsa));
lock_sock(sk);
ax25 = ax25_sk(sk);
fsa->fsa_ax25.sax25_family = AF_AX25;
fsa->fsa_ax25.sax25_call = ax25->dest_addr;
- fsa->fsa_ax25.sax25_ndigis = 0;
if (ax25->digipeat != NULL) {
ndigi = ax25->digipeat->ndigi;
hci_send_cmd(hdev,
HCI_OP_READ_REMOTE_EXT_FEATURES,
sizeof(cp), &cp);
+ } else if (!ev->status && conn->out &&
+ conn->sec_level == BT_SECURITY_HIGH) {
+ struct hci_cp_auth_requested cp;
+ cp.handle = ev->handle;
+ hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
+ sizeof(cp), &cp);
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && BT_L2CAP && INPUT
+ depends on BT && BT_L2CAP && INPUT && HID_SUPPORT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
break;
case 2:
- *val = __le16_to_cpu(*((__le16 *) opt->val));
+ *val = get_unaligned_le16(opt->val);
break;
case 4:
- *val = __le32_to_cpu(*((__le32 *) opt->val));
+ *val = get_unaligned_le32(opt->val);
break;
default:
break;
case 2:
- *((__le16 *) opt->val) = cpu_to_le16(val);
+ put_unaligned_le16(val, opt->val);
break;
case 4:
- *((__le32 *) opt->val) = cpu_to_le32(val);
+ put_unaligned_le32(val, opt->val);
break;
default:
static void rfcomm_process_connect(struct rfcomm_session *s);
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err);
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+ bdaddr_t *dst,
+ u8 sec_level,
+ int *err);
static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst);
static void rfcomm_session_del(struct rfcomm_session *s);
s = rfcomm_session_get(src, dst);
if (!s) {
- s = rfcomm_session_create(src, dst, &err);
+ s = rfcomm_session_create(src, dst, d->sec_level, &err);
if (!s)
return err;
}
rfcomm_session_put(s);
}
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err)
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+ bdaddr_t *dst,
+ u8 sec_level,
+ int *err)
{
struct rfcomm_session *s = NULL;
struct sockaddr_l2 addr;
sk = sock->sk;
lock_sock(sk);
l2cap_pi(sk)->imtu = l2cap_mtu;
+ l2cap_pi(sk)->sec_level = sec_level;
if (l2cap_ertm)
l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
release_sock(sk);
{
struct dev_info *dev_info;
enum cfcnfg_phy_preference pref;
+ int res;
+
memset(l, 0, sizeof(*l));
- l->priority = s->priority;
+ /* In caif protocol low value is high priority */
+ l->priority = CAIF_PRIO_MAX - s->priority + 1;
- if (s->link_name[0] != '\0')
- l->phyid = cfcnfg_get_named(cnfg, s->link_name);
+ if (s->ifindex != 0){
+ res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
+ if (res < 0)
+ return res;
+ l->phyid = res;
+ }
else {
switch (s->link_selector) {
case CAIF_LINK_HIGH_BANDW:
case NETDEV_UNREGISTER:
caifd = caif_get(dev);
+ if (caifd == NULL)
+ break;
netdev_info(dev, "unregister\n");
atomic_set(&caifd->state, what);
caif_device_destroy(dev);
{
struct sock *sk = sock->sk;
struct caifsock *cf_sk = container_of(sk, struct caifsock, sk);
- int prio, linksel;
- struct ifreq ifreq;
+ int linksel;
if (cf_sk->sk.sk_socket->state != SS_UNCONNECTED)
return -ENOPROTOOPT;
release_sock(&cf_sk->sk);
return 0;
- case SO_PRIORITY:
- if (lvl != SOL_SOCKET)
- goto bad_sol;
- if (ol < sizeof(int))
- return -EINVAL;
- if (copy_from_user(&prio, ov, sizeof(int)))
- return -EINVAL;
- lock_sock(&(cf_sk->sk));
- cf_sk->conn_req.priority = prio;
- release_sock(&cf_sk->sk);
- return 0;
-
- case SO_BINDTODEVICE:
- if (lvl != SOL_SOCKET)
- goto bad_sol;
- if (ol < sizeof(struct ifreq))
- return -EINVAL;
- if (copy_from_user(&ifreq, ov, sizeof(ifreq)))
- return -EFAULT;
- lock_sock(&(cf_sk->sk));
- strncpy(cf_sk->conn_req.link_name, ifreq.ifr_name,
- sizeof(cf_sk->conn_req.link_name));
- cf_sk->conn_req.link_name
- [sizeof(cf_sk->conn_req.link_name)-1] = 0;
- release_sock(&cf_sk->sk);
- return 0;
-
case CAIFSO_REQ_PARAM:
if (lvl != SOL_CAIF)
goto bad_sol;
sock->state = SS_CONNECTING;
sk->sk_state = CAIF_CONNECTING;
+ /* Check priority value comming from socket */
+ /* if priority value is out of range it will be ajusted */
+ if (cf_sk->sk.sk_priority > CAIF_PRIO_MAX)
+ cf_sk->conn_req.priority = CAIF_PRIO_MAX;
+ else if (cf_sk->sk.sk_priority < CAIF_PRIO_MIN)
+ cf_sk->conn_req.priority = CAIF_PRIO_MIN;
+ else
+ cf_sk->conn_req.priority = cf_sk->sk.sk_priority;
+
+ /*ifindex = id of the interface.*/
+ cf_sk->conn_req.ifindex = cf_sk->sk.sk_bound_dev_if;
+
dbfs_atomic_inc(&cnt.num_connect_req);
cf_sk->layer.receive = caif_sktrecv_cb;
err = caif_connect_client(&cf_sk->conn_req,
cf_sk->maxframe = mtu - (headroom + tailroom);
if (cf_sk->maxframe < 1) {
pr_warn("CAIF Interface MTU too small (%d)\n", dev->mtu);
+ err = -ENODEV;
goto out;
}
set_rx_flow_on(cf_sk);
/* Set default options on configuration */
- cf_sk->conn_req.priority = CAIF_PRIO_NORMAL;
+ cf_sk->sk.sk_priority= CAIF_PRIO_NORMAL;
cf_sk->conn_req.link_selector = CAIF_LINK_LOW_LATENCY;
cf_sk->conn_req.protocol = protocol;
/* Increase the number of sockets created. */
return NULL;
}
-int cfcnfg_get_named(struct cfcnfg *cnfg, char *name)
+
+int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
{
int i;
-
- /* Try to match with specified name */
- for (i = 0; i < MAX_PHY_LAYERS; i++) {
- if (cnfg->phy_layers[i].frm_layer != NULL
- && strcmp(cnfg->phy_layers[i].phy_layer->name,
- name) == 0)
- return cnfg->phy_layers[i].frm_layer->id;
- }
- return 0;
+ for (i = 0; i < MAX_PHY_LAYERS; i++)
+ if (cnfg->phy_layers[i].frm_layer != NULL &&
+ cnfg->phy_layers[i].ifindex == ifi)
+ return i;
+ return -ENODEV;
}
int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, struct cflayer *adap_layer)
struct cfctrl_request_info *p, *tmp;
struct cfctrl *ctrl = container_obj(layr);
spin_lock(&ctrl->info_list_lock);
- pr_warn("enter\n");
list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
if (p->client_layer == adap_layer) {
- pr_warn("cancel req :%d\n", p->sequence_no);
+ pr_debug("cancel req :%d\n", p->sequence_no);
list_del(&p->list);
kfree(p);
}
#include <net/caif/cfsrvl.h>
#include <net/caif/cfpkt.h>
+#define container_obj(layr) ((struct cfsrvl *) layr)
+
static int cfdbgl_receive(struct cflayer *layr, struct cfpkt *pkt);
static int cfdbgl_transmit(struct cflayer *layr, struct cfpkt *pkt);
static int cfdbgl_transmit(struct cflayer *layr, struct cfpkt *pkt)
{
+ struct cfsrvl *service = container_obj(layr);
+ struct caif_payload_info *info;
+ int ret;
+
+ if (!cfsrvl_ready(service, &ret))
+ return ret;
+
+ /* Add info for MUX-layer to route the packet out */
+ info = cfpkt_info(pkt);
+ info->channel_id = service->layer.id;
+ info->dev_info = &service->dev_info;
+
return layr->dn->transmit(layr->dn, pkt);
}
static int cfrfml_transmit_segment(struct cfrfml *rfml, struct cfpkt *pkt)
{
- caif_assert(cfpkt_getlen(pkt) >= rfml->fragment_size);
+ caif_assert(cfpkt_getlen(pkt) < rfml->fragment_size);
/* Add info for MUX-layer to route the packet out. */
cfpkt_info(pkt)->channel_id = rfml->serv.layer.id;
struct list_head tx_ops;
unsigned long dropped_usr_msgs;
struct proc_dir_entry *bcm_proc_read;
- char procname [9]; /* pointer printed in ASCII with \0 */
+ char procname [20]; /* pointer printed in ASCII with \0 */
};
static inline struct bcm_sock *bcm_sk(const struct sock *sk)
} else {
struct sock *sk = skb->sk;
queue_index = sk_tx_queue_get(sk);
- if (queue_index < 0) {
+ if (queue_index < 0 || queue_index >= dev->real_num_tx_queues) {
queue_index = 0;
if (dev->real_num_tx_queues > 1)
static struct notifier_block dst_dev_notifier = {
.notifier_call = dst_dev_event,
+ .priority = -10, /* must be called after other network notifiers */
};
void __init dst_init(void)
*/
unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int flen)
{
- struct sock_filter *fentry; /* We walk down these */
void *ptr;
u32 A = 0; /* Accumulator */
u32 X = 0; /* Index Register */
u32 mem[BPF_MEMWORDS]; /* Scratch Memory Store */
+ unsigned long memvalid = 0;
u32 tmp;
int k;
int pc;
+ BUILD_BUG_ON(BPF_MEMWORDS > BITS_PER_LONG);
/*
* Process array of filter instructions.
*/
for (pc = 0; pc < flen; pc++) {
- fentry = &filter[pc];
+ const struct sock_filter *fentry = &filter[pc];
+ u32 f_k = fentry->k;
switch (fentry->code) {
case BPF_S_ALU_ADD_X:
A += X;
continue;
case BPF_S_ALU_ADD_K:
- A += fentry->k;
+ A += f_k;
continue;
case BPF_S_ALU_SUB_X:
A -= X;
continue;
case BPF_S_ALU_SUB_K:
- A -= fentry->k;
+ A -= f_k;
continue;
case BPF_S_ALU_MUL_X:
A *= X;
continue;
case BPF_S_ALU_MUL_K:
- A *= fentry->k;
+ A *= f_k;
continue;
case BPF_S_ALU_DIV_X:
if (X == 0)
A /= X;
continue;
case BPF_S_ALU_DIV_K:
- A /= fentry->k;
+ A /= f_k;
continue;
case BPF_S_ALU_AND_X:
A &= X;
continue;
case BPF_S_ALU_AND_K:
- A &= fentry->k;
+ A &= f_k;
continue;
case BPF_S_ALU_OR_X:
A |= X;
continue;
case BPF_S_ALU_OR_K:
- A |= fentry->k;
+ A |= f_k;
continue;
case BPF_S_ALU_LSH_X:
A <<= X;
continue;
case BPF_S_ALU_LSH_K:
- A <<= fentry->k;
+ A <<= f_k;
continue;
case BPF_S_ALU_RSH_X:
A >>= X;
continue;
case BPF_S_ALU_RSH_K:
- A >>= fentry->k;
+ A >>= f_k;
continue;
case BPF_S_ALU_NEG:
A = -A;
continue;
case BPF_S_JMP_JA:
- pc += fentry->k;
+ pc += f_k;
continue;
case BPF_S_JMP_JGT_K:
- pc += (A > fentry->k) ? fentry->jt : fentry->jf;
+ pc += (A > f_k) ? fentry->jt : fentry->jf;
continue;
case BPF_S_JMP_JGE_K:
- pc += (A >= fentry->k) ? fentry->jt : fentry->jf;
+ pc += (A >= f_k) ? fentry->jt : fentry->jf;
continue;
case BPF_S_JMP_JEQ_K:
- pc += (A == fentry->k) ? fentry->jt : fentry->jf;
+ pc += (A == f_k) ? fentry->jt : fentry->jf;
continue;
case BPF_S_JMP_JSET_K:
- pc += (A & fentry->k) ? fentry->jt : fentry->jf;
+ pc += (A & f_k) ? fentry->jt : fentry->jf;
continue;
case BPF_S_JMP_JGT_X:
pc += (A > X) ? fentry->jt : fentry->jf;
pc += (A & X) ? fentry->jt : fentry->jf;
continue;
case BPF_S_LD_W_ABS:
- k = fentry->k;
+ k = f_k;
load_w:
ptr = load_pointer(skb, k, 4, &tmp);
if (ptr != NULL) {
}
break;
case BPF_S_LD_H_ABS:
- k = fentry->k;
+ k = f_k;
load_h:
ptr = load_pointer(skb, k, 2, &tmp);
if (ptr != NULL) {
}
break;
case BPF_S_LD_B_ABS:
- k = fentry->k;
+ k = f_k;
load_b:
ptr = load_pointer(skb, k, 1, &tmp);
if (ptr != NULL) {
X = skb->len;
continue;
case BPF_S_LD_W_IND:
- k = X + fentry->k;
+ k = X + f_k;
goto load_w;
case BPF_S_LD_H_IND:
- k = X + fentry->k;
+ k = X + f_k;
goto load_h;
case BPF_S_LD_B_IND:
- k = X + fentry->k;
+ k = X + f_k;
goto load_b;
case BPF_S_LDX_B_MSH:
- ptr = load_pointer(skb, fentry->k, 1, &tmp);
+ ptr = load_pointer(skb, f_k, 1, &tmp);
if (ptr != NULL) {
X = (*(u8 *)ptr & 0xf) << 2;
continue;
}
return 0;
case BPF_S_LD_IMM:
- A = fentry->k;
+ A = f_k;
continue;
case BPF_S_LDX_IMM:
- X = fentry->k;
+ X = f_k;
continue;
case BPF_S_LD_MEM:
- A = mem[fentry->k];
+ A = (memvalid & (1UL << f_k)) ?
+ mem[f_k] : 0;
continue;
case BPF_S_LDX_MEM:
- X = mem[fentry->k];
+ X = (memvalid & (1UL << f_k)) ?
+ mem[f_k] : 0;
continue;
case BPF_S_MISC_TAX:
X = A;
A = X;
continue;
case BPF_S_RET_K:
- return fentry->k;
+ return f_k;
case BPF_S_RET_A:
return A;
case BPF_S_ST:
- mem[fentry->k] = A;
+ memvalid |= 1UL << f_k;
+ mem[f_k] = A;
continue;
case BPF_S_STX:
- mem[fentry->k] = X;
+ memvalid |= 1UL << f_k;
+ mem[f_k] = X;
continue;
default:
WARN_ON(1);
i += len;
if (debug) {
- size_t copy = min(count, 1023);
+ size_t copy = min_t(size_t, count, 1023);
char tb[copy + 1];
if (copy_from_user(tb, user_buffer, copy))
return -EFAULT;
/* Update any of the values, used when we're incrementing various
* fields.
*/
- queue_map = pkt_dev->cur_queue_map;
mod_cur_headers(pkt_dev);
+ queue_map = pkt_dev->cur_queue_map;
datalen = (odev->hard_header_len + 16) & ~0xf;
/* Update any of the values, used when we're incrementing various
* fields.
*/
- queue_map = pkt_dev->cur_queue_map;
mod_cur_headers(pkt_dev);
+ queue_map = pkt_dev->cur_queue_map;
skb = __netdev_alloc_skb(odev,
pkt_dev->cur_pkt_size + 64
if (!ops)
return 0;
- size = nlmsg_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
- nlmsg_total_size(strlen(ops->kind) + 1); /* IFLA_INFO_KIND */
+ size = nla_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
+ nla_total_size(strlen(ops->kind) + 1); /* IFLA_INFO_KIND */
if (ops->get_size)
/* IFLA_INFO_DATA + nested data */
- size += nlmsg_total_size(sizeof(struct nlattr)) +
+ size += nla_total_size(sizeof(struct nlattr)) +
ops->get_size(dev);
if (ops->get_xstats_size)
- size += ops->get_xstats_size(dev); /* IFLA_INFO_XSTATS */
+ /* IFLA_INFO_XSTATS */
+ size += nla_total_size(ops->get_xstats_size(dev));
return size;
}
{
struct proto *prot = sk->sk_prot;
int amt = sk_mem_pages(size);
- int allocated;
+ long allocated;
sk->sk_forward_alloc += amt * SK_MEM_QUANTUM;
- allocated = atomic_add_return(amt, prot->memory_allocated);
+ allocated = atomic_long_add_return(amt, prot->memory_allocated);
/* Under limit. */
if (allocated <= prot->sysctl_mem[0]) {
/* Alas. Undo changes. */
sk->sk_forward_alloc -= amt * SK_MEM_QUANTUM;
- atomic_sub(amt, prot->memory_allocated);
+ atomic_long_sub(amt, prot->memory_allocated);
return 0;
}
EXPORT_SYMBOL(__sk_mem_schedule);
{
struct proto *prot = sk->sk_prot;
- atomic_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
+ atomic_long_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
prot->memory_allocated);
sk->sk_forward_alloc &= SK_MEM_QUANTUM - 1;
if (prot->memory_pressure && *prot->memory_pressure &&
- (atomic_read(prot->memory_allocated) < prot->sysctl_mem[0]))
+ (atomic_long_read(prot->memory_allocated) < prot->sysctl_mem[0]))
*prot->memory_pressure = 0;
}
EXPORT_SYMBOL(__sk_mem_reclaim);
static void proto_seq_printf(struct seq_file *seq, struct proto *proto)
{
- seq_printf(seq, "%-9s %4u %6d %6d %-3s %6u %-3s %-10s "
+ seq_printf(seq, "%-9s %4u %6d %6ld %-3s %6u %-3s %-10s "
"%2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c\n",
proto->name,
proto->obj_size,
sock_prot_inuse_get(seq_file_net(seq), proto),
- proto->memory_allocated != NULL ? atomic_read(proto->memory_allocated) : -1,
+ proto->memory_allocated != NULL ? atomic_long_read(proto->memory_allocated) : -1L,
proto->memory_pressure != NULL ? *proto->memory_pressure ? "yes" : "no" : "NI",
proto->max_header,
proto->slab == NULL ? "no" : "yes",
static DEFINE_RWLOCK(dn_hash_lock);
static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE];
static struct hlist_head dn_wild_sk;
-static atomic_t decnet_memory_allocated;
+static atomic_long_t decnet_memory_allocated;
static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags);
static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags);
int decnet_no_fc_max_cwnd = NSP_MIN_WINDOW;
/* Reasonable defaults, I hope, based on tcp's defaults */
-int sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
+long sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
int sysctl_decnet_wmem[3] = { 4 * 1024, 16 * 1024, 128 * 1024 };
int sysctl_decnet_rmem[3] = { 4 * 1024, 87380, 87380 * 2 };
.data = &sysctl_decnet_mem,
.maxlen = sizeof(sysctl_decnet_mem),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_doulongvec_minmax
},
{
.procname = "decnet_rmem",
static inline void fib_result_assign(struct fib_result *res,
struct fib_info *fi)
{
- if (res->fi != NULL)
- fib_info_put(res->fi);
+ /* we used to play games with refcounts, but we now use RCU */
res->fi = fi;
- if (fi != NULL)
- atomic_inc(&fi->fib_clntref);
}
#endif /* _FIB_LOOKUP_H */
in_dev = inetdev_by_index(net, iml->multi.imr_ifindex);
(void) ip_mc_leave_src(sk, iml, in_dev);
- if (in_dev != NULL) {
+ if (in_dev != NULL)
ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
- in_dev_put(in_dev);
- }
/* decrease mem now to avoid the memleak warning */
atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
{
struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
struct inet_diag_entry entry;
- struct rtattr *bc = (struct rtattr *)(r + 1);
+ const struct nlattr *bc = nlmsg_find_attr(cb->nlh,
+ sizeof(*r),
+ INET_DIAG_REQ_BYTECODE);
struct inet_sock *inet = inet_sk(sk);
entry.family = sk->sk_family;
entry.dport = ntohs(inet->inet_dport);
entry.userlocks = sk->sk_userlocks;
- if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
+ if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry))
return 0;
}
{
struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
struct inet_diag_entry entry;
- struct rtattr *bc = (struct rtattr *)(r + 1);
+ const struct nlattr *bc = nlmsg_find_attr(cb->nlh,
+ sizeof(*r),
+ INET_DIAG_REQ_BYTECODE);
entry.family = tw->tw_family;
#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
entry.dport = ntohs(tw->tw_dport);
entry.userlocks = 0;
- if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
+ if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry))
return 0;
}
struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
struct inet_connection_sock *icsk = inet_csk(sk);
struct listen_sock *lopt;
- struct rtattr *bc = NULL;
+ const struct nlattr *bc = NULL;
struct inet_sock *inet = inet_sk(sk);
int j, s_j;
int reqnum, s_reqnum;
if (!lopt || !lopt->qlen)
goto out;
- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
- bc = (struct rtattr *)(r + 1);
+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
+ bc = nlmsg_find_attr(cb->nlh, sizeof(*r),
+ INET_DIAG_REQ_BYTECODE);
entry.sport = inet->inet_num;
entry.userlocks = sk->sk_userlocks;
}
&ireq->rmt_addr;
entry.dport = ntohs(ireq->rmt_port);
- if (!inet_diag_bc_run(RTA_DATA(bc),
- RTA_PAYLOAD(bc), &entry))
+ if (!inet_diag_bc_run(nla_data(bc),
+ nla_len(bc), &entry))
continue;
}
private = &tmp;
}
#endif
+ memset(&info, 0, sizeof(info));
info.valid_hooks = t->valid_hooks;
memcpy(info.hook_entry, private->hook_entry,
sizeof(info.hook_entry));
private = &tmp;
}
#endif
+ memset(&info, 0, sizeof(info));
info.valid_hooks = t->valid_hooks;
memcpy(info.hook_entry, private->hook_entry,
sizeof(info.hook_entry));
return rcu_dereference(nf_nat_protos[protonum]);
}
-static const struct nf_nat_protocol *
-nf_nat_proto_find_get(u_int8_t protonum)
-{
- const struct nf_nat_protocol *p;
-
- rcu_read_lock();
- p = __nf_nat_proto_find(protonum);
- if (!try_module_get(p->me))
- p = &nf_nat_unknown_protocol;
- rcu_read_unlock();
-
- return p;
-}
-
-static void
-nf_nat_proto_put(const struct nf_nat_protocol *p)
-{
- module_put(p->me);
-}
-
/* We keep an extra hash for each conntrack, for fast searching. */
static inline unsigned int
hash_by_src(const struct net *net, u16 zone,
#include <linux/netfilter/nfnetlink.h>
#include <linux/netfilter/nfnetlink_conntrack.h>
+static const struct nf_nat_protocol *
+nf_nat_proto_find_get(u_int8_t protonum)
+{
+ const struct nf_nat_protocol *p;
+
+ rcu_read_lock();
+ p = __nf_nat_proto_find(protonum);
+ if (!try_module_get(p->me))
+ p = &nf_nat_unknown_protocol;
+ rcu_read_unlock();
+
+ return p;
+}
+
+static void
+nf_nat_proto_put(const struct nf_nat_protocol *p)
+{
+ module_put(p->me);
+}
+
static const struct nla_policy protonat_nla_policy[CTA_PROTONAT_MAX+1] = {
[CTA_PROTONAT_PORT_MIN] = { .type = NLA_U16 },
[CTA_PROTONAT_PORT_MAX] = { .type = NLA_U16 },
local_bh_enable();
socket_seq_show(seq);
- seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n",
+ seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %ld\n",
sock_prot_inuse_get(net, &tcp_prot), orphans,
tcp_death_row.tw_count, sockets,
- atomic_read(&tcp_memory_allocated));
- seq_printf(seq, "UDP: inuse %d mem %d\n",
+ atomic_long_read(&tcp_memory_allocated));
+ seq_printf(seq, "UDP: inuse %d mem %ld\n",
sock_prot_inuse_get(net, &udp_prot),
- atomic_read(&udp_memory_allocated));
+ atomic_long_read(&udp_memory_allocated));
seq_printf(seq, "UDPLITE: inuse %d\n",
sock_prot_inuse_get(net, &udplite_prot));
seq_printf(seq, "RAW: inuse %d\n",
.data = &sysctl_tcp_mem,
.maxlen = sizeof(sysctl_tcp_mem),
.mode = 0644,
- .proc_handler = proc_dointvec
+ .proc_handler = proc_doulongvec_minmax
},
{
.procname = "tcp_wmem",
.data = &sysctl_udp_mem,
.maxlen = sizeof(sysctl_udp_mem),
.mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = &zero
+ .proc_handler = proc_doulongvec_minmax,
},
{
.procname = "udp_rmem_min",
struct percpu_counter tcp_orphan_count;
EXPORT_SYMBOL_GPL(tcp_orphan_count);
-int sysctl_tcp_mem[3] __read_mostly;
+long sysctl_tcp_mem[3] __read_mostly;
int sysctl_tcp_wmem[3] __read_mostly;
int sysctl_tcp_rmem[3] __read_mostly;
EXPORT_SYMBOL(sysctl_tcp_rmem);
EXPORT_SYMBOL(sysctl_tcp_wmem);
-atomic_t tcp_memory_allocated; /* Current allocated memory. */
+atomic_long_t tcp_memory_allocated; /* Current allocated memory. */
EXPORT_SYMBOL(tcp_memory_allocated);
/*
/* Values greater than interface MTU won't take effect. However
* at the point when this call is done we typically don't yet
* know which interface is going to be used */
- if (val < 8 || val > MAX_TCP_WINDOW) {
+ if (val < 64 || val > MAX_TCP_WINDOW) {
err = -EINVAL;
break;
}
int sndmem = tcp_sk(sk)->rx_opt.mss_clamp + MAX_TCP_HEADER + 16 +
sizeof(struct sk_buff);
- if (sk->sk_sndbuf < 3 * sndmem)
- sk->sk_sndbuf = min(3 * sndmem, sysctl_tcp_wmem[2]);
+ if (sk->sk_sndbuf < 3 * sndmem) {
+ sk->sk_sndbuf = 3 * sndmem;
+ if (sk->sk_sndbuf > sysctl_tcp_wmem[2])
+ sk->sk_sndbuf = sysctl_tcp_wmem[2];
+ }
}
/* 2. Tuning advertised window (window_clamp, rcv_ssthresh)
if (sk->sk_rcvbuf < sysctl_tcp_rmem[2] &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
!tcp_memory_pressure &&
- atomic_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
+ atomic_long_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
sk->sk_rcvbuf = min(atomic_read(&sk->sk_rmem_alloc),
sysctl_tcp_rmem[2]);
}
return 0;
/* If we are under soft global TCP memory pressure, do not expand. */
- if (atomic_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
+ if (atomic_long_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
return 0;
/* If we filled the congestion window, do not expand. */
!icsk->icsk_backoff)
break;
+ if (sock_owned_by_user(sk))
+ break;
+
icsk->icsk_backoff--;
inet_csk(sk)->icsk_rto = __tcp_set_rto(tp) <<
icsk->icsk_backoff;
if (remaining) {
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
remaining, TCP_RTO_MAX);
- } else if (sock_owned_by_user(sk)) {
- /* RTO revert clocked out retransmission,
- * but socket is locked. Will defer. */
- inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
- HZ/20, TCP_RTO_MAX);
} else {
/* RTO revert clocked out retransmission.
* Will retransmit now */
struct udp_table udp_table __read_mostly;
EXPORT_SYMBOL(udp_table);
-int sysctl_udp_mem[3] __read_mostly;
+long sysctl_udp_mem[3] __read_mostly;
EXPORT_SYMBOL(sysctl_udp_mem);
int sysctl_udp_rmem_min __read_mostly;
int sysctl_udp_wmem_min __read_mostly;
EXPORT_SYMBOL(sysctl_udp_wmem_min);
-atomic_t udp_memory_allocated;
+atomic_long_t udp_memory_allocated;
EXPORT_SYMBOL(udp_memory_allocated);
#define MAX_UDP_PORTS 65536
/* Flag it for later restoration when link comes up */
ifa->flags |= IFA_F_TENTATIVE;
ifa->state = INET6_IFADDR_STATE_DAD;
-
- write_unlock_bh(&idev->lock);
-
- in6_ifa_hold(ifa);
} else {
list_del(&ifa->if_list);
ifa->state = INET6_IFADDR_STATE_DEAD;
spin_unlock_bh(&ifa->state_lock);
- if (state == INET6_IFADDR_STATE_DEAD)
- goto put_ifa;
+ if (state == INET6_IFADDR_STATE_DEAD) {
+ in6_ifa_put(ifa);
+ } else {
+ __ipv6_ifa_notify(RTM_DELADDR, ifa);
+ atomic_notifier_call_chain(&inet6addr_chain,
+ NETDEV_DOWN, ifa);
+ }
+ write_lock_bh(&idev->lock);
}
-
- __ipv6_ifa_notify(RTM_DELADDR, ifa);
- if (ifa->state == INET6_IFADDR_STATE_DEAD)
- atomic_notifier_call_chain(&inet6addr_chain,
- NETDEV_DOWN, ifa);
-
-put_ifa:
- in6_ifa_put(ifa);
-
- write_lock_bh(&idev->lock);
}
list_splice(&keep_list, &idev->addr_list);
private = &tmp;
}
#endif
+ memset(&info, 0, sizeof(info));
info.valid_hooks = t->valid_hooks;
memcpy(info.hook_entry, private->hook_entry,
sizeof(info.hook_entry));
/* Check for overlap with preceding fragment. */
if (prev &&
- (NFCT_FRAG6_CB(prev)->offset + prev->len) - offset > 0)
+ (NFCT_FRAG6_CB(prev)->offset + prev->len) > offset)
goto discard_fq;
/* Look for overlap with succeeding segment. */
/* Check for overlap with preceding fragment. */
if (prev &&
- (FRAG6_CB(prev)->offset + prev->len) - offset > 0)
+ (FRAG6_CB(prev)->offset + prev->len) > offset)
goto discard_fq;
/* Look for overlap with succeeding segment. */
struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
struct neighbour *neigh;
- if (rt == NULL)
+ if (rt == NULL) {
+ if (net_ratelimit())
+ pr_warning("IPv6: Maximum number of routes reached,"
+ " consider increasing route/max_size.\n");
return ERR_PTR(-ENOMEM);
+ }
dev_hold(net->loopback_dev);
in6_dev_hold(idev);
kfree(net->ipv6.ip6_prohibit_entry);
kfree(net->ipv6.ip6_blk_hole_entry);
#endif
+ dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
static struct pernet_operations ip6_route_net_ops = {
xfrm6_fini();
fib6_gc_cleanup();
unregister_pernet_subsys(&ip6_route_net_ops);
+ dst_entries_destroy(&ip6_dst_blackhole_ops);
kmem_cache_destroy(ip6_dst_ops_template.kmem_cachep);
}
struct seq_file *seq;
int rc = -ENOMEM;
- pd = kzalloc(GFP_KERNEL, sizeof(*pd));
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (pd == NULL)
goto out;
u32 hw_reconf_flags = 0;
int i;
+ if (local->scan_sdata == sdata)
+ ieee80211_scan_cancel(local);
+
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
/*
synchronize_rcu();
skb_queue_purge(&sdata->skb_queue);
- if (local->scan_sdata == sdata)
- ieee80211_scan_cancel(local);
-
/*
* Disable beaconing here for mesh only, AP and IBSS
* are already taken care of.
if (!hash) {
*vmalloced = 1;
printk(KERN_WARNING "nf_conntrack: falling back to vmalloc.\n");
- hash = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+ hash = __vmalloc(sz, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+ PAGE_KERNEL);
}
if (hash && nulls)
for (i = 0; i < MAX_NF_CT_PROTO; i++)
proto_array[i] = &nf_conntrack_l4proto_generic;
+
+ /* Before making proto_array visible to lockless readers,
+ * we must make sure its content is committed to memory.
+ */
+ smp_wmb();
+
nf_ct_protos[l4proto->l3proto] = proto_array;
} else if (nf_ct_protos[l4proto->l3proto][l4proto->l4proto] !=
&nf_conntrack_l4proto_generic) {
err = -EINVAL;
vnet_hdr_len = sizeof(vnet_hdr);
- if ((len -= vnet_hdr_len) < 0)
+ if (len < vnet_hdr_len)
goto out_free;
+ len -= vnet_hdr_len;
+
if (skb_is_gso(skb)) {
struct skb_shared_info *sinfo = skb_shinfo(skb);
rcu_read_lock();
dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
if (dev)
- strlcpy(uaddr->sa_data, dev->name, 15);
+ strncpy(uaddr->sa_data, dev->name, 14);
else
memset(uaddr->sa_data, 0, 14);
rcu_read_unlock();
sll->sll_family = AF_PACKET;
sll->sll_ifindex = po->ifindex;
sll->sll_protocol = po->num;
+ sll->sll_pkttype = 0;
rcu_read_lock();
dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
if (dev) {
static void rds_loop_conn_free(void *arg)
{
struct rds_loop_connection *lc = arg;
+ unsigned long flags;
+
rdsdebug("lc %p\n", lc);
+ spin_lock_irqsave(&loop_conns_lock, flags);
list_del(&lc->loop_node);
+ spin_unlock_irqrestore(&loop_conns_lock, flags);
kfree(lc);
}
rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len);
rm->data.op_nents = ceil(total_len, PAGE_SIZE);
rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
- if (!rm->data.op_sg)
+ if (!rm->data.op_sg) {
+ rds_message_put(rm);
return ERR_PTR(-ENOMEM);
+ }
for (i = 0; i < rm->data.op_nents; ++i) {
sg_set_page(&rm->data.op_sg[i],
static void rds_tcp_conn_free(void *arg)
{
struct rds_tcp_connection *tc = arg;
+ unsigned long flags;
rdsdebug("freeing tc %p\n", tc);
+
+ spin_lock_irqsave(&rds_tcp_conn_lock, flags);
+ list_del(&tc->t_tcp_node);
+ spin_unlock_irqrestore(&rds_tcp_conn_lock, flags);
+
kmem_cache_free(rds_tcp_conn_slab, tc);
}
goto nla_put_failure;
nla_nest_end(skb, nest);
+
+ if (tcf_exts_dump_stats(skb, &f->exts, &basic_ext_map) < 0)
+ goto nla_put_failure;
+
return skb->len;
nla_put_failure:
.populate = cgrp_populate,
#ifdef CONFIG_NET_CLS_CGROUP
.subsys_id = net_cls_subsys_id,
-#else
-#define net_cls_subsys_id net_cls_subsys.subsys_id
#endif
.module = THIS_MODULE,
};
static void em_text_destroy(struct tcf_proto *tp, struct tcf_ematch *m)
{
- textsearch_destroy(EM_TEXT_PRIV(m)->config);
+ if (EM_TEXT_PRIV(m) && EM_TEXT_PRIV(m)->config)
+ textsearch_destroy(EM_TEXT_PRIV(m)->config);
}
static int em_text_dump(struct sk_buff *skb, struct tcf_ematch *m)
struct kmem_cache *sctp_chunk_cachep __read_mostly;
struct kmem_cache *sctp_bucket_cachep __read_mostly;
-int sysctl_sctp_mem[3];
+long sysctl_sctp_mem[3];
int sysctl_sctp_rmem[3];
int sysctl_sctp_wmem[3];
static char *sctp_hmac_alg = SCTP_COOKIE_HMAC_ALG;
extern struct kmem_cache *sctp_bucket_cachep;
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
extern int sysctl_sctp_rmem[3];
extern int sysctl_sctp_wmem[3];
static int sctp_memory_pressure;
-static atomic_t sctp_memory_allocated;
+static atomic_long_t sctp_memory_allocated;
struct percpu_counter sctp_sockets_allocated;
static void sctp_enter_memory_pressure(struct sock *sk)
static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
static int rwnd_scale_max = 16;
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
extern int sysctl_sctp_rmem[3];
extern int sysctl_sctp_wmem[3];
.data = &sysctl_sctp_mem,
.maxlen = sizeof(sysctl_sctp_mem),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_doulongvec_minmax
},
{
.procname = "sctp_rmem",
struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr;
struct tipc_sock *tsock = tipc_sk(sock->sk);
+ memset(addr, 0, sizeof(*addr));
if (peer) {
if ((sock->state != SS_CONNECTED) &&
((peer != 2) || (sock->state != SS_DISCONNECTING)))
}
*rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
- if (IS_ERR(dev)) {
- err = PTR_ERR(dev);
+ if (IS_ERR(*rdev)) {
+ err = PTR_ERR(*rdev);
goto out_rtnl;
}
while (len > 0) {
switch (*p & X25_FAC_CLASS_MASK) {
case X25_FAC_CLASS_A:
+ if (len < 2)
+ return 0;
switch (*p) {
case X25_FAC_REVERSE:
if((p[1] & 0x81) == 0x81) {
len -= 2;
break;
case X25_FAC_CLASS_B:
+ if (len < 3)
+ return 0;
switch (*p) {
case X25_FAC_PACKET_SIZE:
facilities->pacsize_in = p[1];
len -= 3;
break;
case X25_FAC_CLASS_C:
+ if (len < 4)
+ return 0;
printk(KERN_DEBUG "X.25: unknown facility %02X, "
"values %02X, %02X, %02X\n",
p[0], p[1], p[2], p[3]);
len -= 4;
break;
case X25_FAC_CLASS_D:
+ if (len < p[1] + 2)
+ return 0;
switch (*p) {
case X25_FAC_CALLING_AE:
- if (p[1] > X25_MAX_DTE_FACIL_LEN)
- break;
+ if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+ return 0;
dte_facs->calling_len = p[2];
memcpy(dte_facs->calling_ae, &p[3], p[1] - 1);
*vc_fac_mask |= X25_MASK_CALLING_AE;
break;
case X25_FAC_CALLED_AE:
- if (p[1] > X25_MAX_DTE_FACIL_LEN)
- break;
+ if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+ return 0;
dte_facs->called_len = p[2];
memcpy(dte_facs->called_ae, &p[3], p[1] - 1);
*vc_fac_mask |= X25_MASK_CALLED_AE;
break;
default:
printk(KERN_DEBUG "X.25: unknown facility %02X,"
- "length %d, values %02X, %02X, "
- "%02X, %02X\n",
- p[0], p[1], p[2], p[3], p[4], p[5]);
+ "length %d\n", p[0], p[1]);
break;
}
len -= p[1] + 2;
&x25->vc_facil_mask);
if (len > 0)
skb_pull(skb, len);
+ else
+ return -1;
/*
* Copy any Call User Data.
*/
symval = sym_get_string_value(sym);
}
- newlen = strlen(res) + strlen(symval) + strlen(src);
+ newlen = strlen(res) + strlen(symval) + strlen(src) + 1;
if (newlen > reslen) {
reslen = newlen;
res = realloc(res, reslen);
If you are unsure as to whether this is required, answer N.
+config SECURITY_DMESG_RESTRICT
+ bool "Restrict unprivileged access to the kernel syslog"
+ default n
+ help
+ This enforces restrictions on unprivileged users reading the kernel
+ syslog via dmesg(8).
+
+ If this option is not selected, no restrictions will be enforced
+ unless the dmesg_restrict sysctl is explicitly set to (1).
+
+ If you are unsure how to answer this question, answer N.
+
config SECURITY
bool "Enable different security models"
depends on SYSFS
error = register_security(&apparmor_ops);
if (error) {
AA_ERROR("Unable to register AppArmor\n");
- goto register_security_out;
+ goto set_init_cxt_out;
}
/* Report that AppArmor successfully initialized */
return error;
+set_init_cxt_out:
+ aa_free_task_context(current->real_cred->security);
+
register_security_out:
aa_free_root_ns();
apparmor_enabled = 0;
return error;
-
}
security_initcall(apparmor_init);
return ns;
fail_unconfined:
- kzfree(ns->base.name);
+ kzfree(ns->base.hname);
fail_ns:
kzfree(ns);
return NULL;
return 0;
}
+static int cap_syslog(int type)
+{
+ return 0;
+}
+
static int cap_quotactl(int cmds, int type, int id, struct super_block *sb)
{
return 0;
#include <linux/sched.h>
#include <linux/prctl.h>
#include <linux/securebits.h>
-#include <linux/syslog.h>
/*
* If a non-root user executes a setuid-root binary in
return error;
}
-/**
- * cap_syslog - Determine whether syslog function is permitted
- * @type: Function requested
- * @from_file: Whether this request came from an open file (i.e. /proc)
- *
- * Determine whether the current process is permitted to use a particular
- * syslog function, returning 0 if permission is granted, -ve if not.
- */
-int cap_syslog(int type, bool from_file)
-{
- if (type != SYSLOG_ACTION_OPEN && from_file)
- return 0;
- if ((type != SYSLOG_ACTION_READ_ALL &&
- type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
- return -EPERM;
- return 0;
-}
-
/**
* cap_vm_enough_memory - Determine whether a new virtual mapping is permitted
* @mm: The VM space in which the new mapping is to be made
return security_ops->quota_on(dentry);
}
-int security_syslog(int type, bool from_file)
+int security_syslog(int type)
{
- return security_ops->syslog(type, from_file);
+ return security_ops->syslog(type);
}
int security_settime(struct timespec *ts, struct timezone *tz)
return dentry_has_perm(cred, NULL, dentry, FILE__QUOTAON);
}
-static int selinux_syslog(int type, bool from_file)
+static int selinux_syslog(int type)
{
int rc;
- rc = cap_syslog(type, from_file);
- if (rc)
- return rc;
-
switch (type) {
case SYSLOG_ACTION_READ_ALL: /* Read last kernel messages */
case SYSLOG_ACTION_SIZE_BUFFER: /* Return size of the log buffer */
*
* Returns 0 on success, error code otherwise.
*/
-static int smack_syslog(int type, bool from_file)
+static int smack_syslog(int typefrom_file)
{
- int rc;
+ int rc = 0;
char *sp = current_security();
- rc = cap_syslog(type, from_file);
- if (rc != 0)
- return rc;
-
if (capable(CAP_MAC_OVERRIDE))
return 0;
control_cache_size, (struct hpi_control_cache_info *)
&phw->control_cache[0]
);
+ if (!phw->p_cache)
+ pao->has_control_cache = 0;
} else
pao->has_control_cache = 0;
interface->control_cache.size_in_bytes,
(struct hpi_control_cache_info *)
p_control_cache_virtual);
+ if (!phw->p_cache)
+ err = HPI_ERROR_MEMORY_ALLOC;
}
if (!err) {
err = hpios_locked_mem_get_phys_addr(&phw->
{
struct hpi_control_cache *p_cache =
kmalloc(sizeof(*p_cache), GFP_KERNEL);
+ if (!p_cache)
+ return NULL;
+ p_cache->p_info =
+ kmalloc(sizeof(*p_cache->p_info) * number_of_controls,
+ GFP_KERNEL);
+ if (!p_cache->p_info) {
+ kfree(p_cache);
+ return NULL;
+ }
p_cache->cache_size_in_bytes = size_in_bytes;
p_cache->control_count = number_of_controls;
p_cache->p_cache =
(struct hpi_control_cache_single *)pDSP_control_buffer;
p_cache->init = 0;
- p_cache->p_info =
- kmalloc(sizeof(*p_cache->p_info) * p_cache->control_count,
- GFP_KERNEL);
return p_cache;
}
{
struct dsp_spos_instance * ins = kzalloc(sizeof(struct dsp_spos_instance), GFP_KERNEL);
- if (ins == NULL)
+ if (ins == NULL)
return NULL;
/* better to use vmalloc for this big table */
- ins->symbol_table.nsymbols = 0;
ins->symbol_table.symbols = vmalloc(sizeof(struct dsp_symbol_entry) *
DSP_MAX_SYMBOLS);
- ins->symbol_table.highest_frag_index = 0;
-
- if (ins->symbol_table.symbols == NULL) {
+ ins->code.data = kmalloc(DSP_CODE_BYTE_SIZE, GFP_KERNEL);
+ ins->modules = kmalloc(sizeof(struct dsp_module_desc) * DSP_MAX_MODULES, GFP_KERNEL);
+ if (!ins->symbol_table.symbols || !ins->code.data || !ins->modules) {
cs46xx_dsp_spos_destroy(chip);
goto error;
}
-
+ ins->symbol_table.nsymbols = 0;
+ ins->symbol_table.highest_frag_index = 0;
ins->code.offset = 0;
ins->code.size = 0;
- ins->code.data = kmalloc(DSP_CODE_BYTE_SIZE, GFP_KERNEL);
-
- if (ins->code.data == NULL) {
- cs46xx_dsp_spos_destroy(chip);
- goto error;
- }
-
ins->nscb = 0;
ins->ntask = 0;
-
ins->nmodules = 0;
- ins->modules = kmalloc(sizeof(struct dsp_module_desc) * DSP_MAX_MODULES, GFP_KERNEL);
-
- if (ins->modules == NULL) {
- cs46xx_dsp_spos_destroy(chip);
- goto error;
- }
/* default SPDIF input sample rate
to 48000 khz */
/* set left and right validity bits and
default channel status */
- ins->spdif_csuv_default =
- ins->spdif_csuv_stream =
+ ins->spdif_csuv_default =
+ ins->spdif_csuv_stream =
/* byte 0 */ ((unsigned int)_wrap_all_bits( (SNDRV_PCM_DEFAULT_CON_SPDIF & 0xff)) << 24) |
/* byte 1 */ ((unsigned int)_wrap_all_bits( ((SNDRV_PCM_DEFAULT_CON_SPDIF >> 8) & 0xff)) << 16) |
/* byte 3 */ (unsigned int)_wrap_all_bits( (SNDRV_PCM_DEFAULT_CON_SPDIF >> 24) & 0xff) |
return ins;
error:
+ kfree(ins->modules);
+ kfree(ins->code.data);
+ vfree(ins->symbol_table.symbols);
kfree(ins);
return NULL;
}
static struct snd_pci_quirk cs420x_cfg_tbl[] = {
SND_PCI_QUIRK(0x10de, 0x0ac0, "MacBookPro 5,3", CS420X_MBP53),
+ SND_PCI_QUIRK(0x10de, 0x0d94, "MacBookAir 3,1(2)", CS420X_MBP55),
SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55),
SND_PCI_QUIRK(0x10de, 0xcb89, "MacBookPro 7,1", CS420X_MBP55),
SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27),
static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream)
{
struct snd_pcm_substream *substream = lx_stream->stream;
- const int is_capture = lx_stream->is_capture;
+ const unsigned int is_capture = lx_stream->is_capture;
int err;
static void lx_trigger_stop(struct lx6464es *chip, struct lx_stream *lx_stream)
{
- const int is_capture = lx_stream->is_capture;
+ const unsigned int is_capture = lx_stream->is_capture;
int err;
snd_printd(LXP "stopping: stopping stream\n");
snd_pcm_uframes_t frame_pos;
enum lx_stream_status status; /* free, open, running, draining
* pause */
- int is_capture:1;
+ unsigned int is_capture:1;
};
struct lx_stream *lx_stream)
{
struct snd_pcm_substream *substream = lx_stream->stream;
- int is_capture = lx_stream->is_capture;
+ const unsigned int is_capture = lx_stream->is_capture;
int err;
unsigned long flags;
{ USB_ID(0x041e, 0x3000), 0, 1, 2, 1, 18, 0x0013 }, /* Extigy */
{ USB_ID(0x041e, 0x3020), 2, 1, 6, 6, 18, 0x0013 }, /* Audigy 2 NX */
{ USB_ID(0x041e, 0x3040), 2, 2, 6, 6, 2, 0x6e91 }, /* Live! 24-bit */
- { USB_ID(0x041e, 0x3042), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi */
+ { USB_ID(0x041e, 0x3042), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi S51 */
{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6, 2, 0x6e91 }, /* Toshiba SB0500 */
};
if (value > 1)
return -EINVAL;
changed = value != mixer->audigy2nx_leds[index];
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042))
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ !value, 0, NULL, 0, 100);
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
value, index + 2, NULL, 0, 100);
int i, err;
for (i = 0; i < ARRAY_SIZE(snd_audigy2nx_controls); ++i) {
+ /* USB X-Fi S51 doesn't have a CMSS LED */
+ if ((mixer->chip->usb_id == USB_ID(0x041e, 0x3042)) && i == 0)
+ continue;
if (i > 1 && /* Live24ext has 2 LEDs only */
(mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
+ mixer->chip->usb_id == USB_ID(0x041e, 0x3042) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048)))
break;
err = snd_ctl_add(mixer->chip->card,
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
+ mixer->chip->usb_id == USB_ID(0x041e, 0x3042) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) {
if ((err = snd_audigy2nx_controls_create(mixer)) < 0)
return err;
if (!needs_knot)
return 0;
- subs->rate_list.count = count;
subs->rate_list.list = kmalloc(sizeof(int) * count, GFP_KERNEL);
+ if (!subs->rate_list.list)
+ return -ENOMEM;
+ subs->rate_list.count = count;
subs->rate_list.mask = 0;
count = 0;
list_for_each_entry(fp, &subs->fmt_list, list) {
SYNOPSIS
--------
[verse]
-'perf trace' {record <script> | report <script> [args] }
+'perf trace' [<options>]
+'perf trace' [<options>] record <script> [<record-options>] <command>
+'perf trace' [<options>] report <script> [script-args]
+'perf trace' [<options>] <script> <required-script-args> [<record-options>] <command>
+'perf trace' [<options>] <top-script> [script-args]
DESCRIPTION
-----------
available via 'perf trace -l'). The following variants allow you to
record and run those scripts:
- 'perf trace record <script>' to record the events required for 'perf
- trace report'. <script> is the name displayed in the output of
- 'perf trace --list' i.e. the actual script name minus any language
- extension.
+ 'perf trace record <script> <command>' to record the events required
+ for 'perf trace report'. <script> is the name displayed in the
+ output of 'perf trace --list' i.e. the actual script name minus any
+ language extension. If <command> is not specified, the events are
+ recorded using the -a (system-wide) 'perf record' option.
- 'perf trace report <script>' to run and display the results of
- <script>. <script> is the name displayed in the output of 'perf
+ 'perf trace report <script> [args]' to run and display the results
+ of <script>. <script> is the name displayed in the output of 'perf
trace --list' i.e. the actual script name minus any language
extension. The perf.data output from a previous run of 'perf trace
record <script>' is used and should be present for this command to
- succeed.
+ succeed. [args] refers to the (mainly optional) args expected by
+ the script.
+
+ 'perf trace <script> <required-script-args> <command>' to both
+ record the events required for <script> and to run the <script>
+ using 'live-mode' i.e. without writing anything to disk. <script>
+ is the name displayed in the output of 'perf trace --list' i.e. the
+ actual script name minus any language extension. If <command> is
+ not specified, the events are recorded using the -a (system-wide)
+ 'perf record' option. If <script> has any required args, they
+ should be specified before <command>. This mode doesn't allow for
+ optional script args to be specified; if optional script args are
+ desired, they can be specified using separate 'perf trace record'
+ and 'perf trace report' commands, with the stdout of the record step
+ piped to the stdin of the report script, using the '-o -' and '-i -'
+ options of the corresponding commands.
+
+ 'perf trace <top-script>' to both record the events required for
+ <top-script> and to run the <top-script> using 'live-mode'
+ i.e. without writing anything to disk. <top-script> is the name
+ displayed in the output of 'perf trace --list' i.e. the actual
+ script name minus any language extension; a <top-script> is defined
+ as any script name ending with the string 'top'.
+
+ [<record-options>] can be passed to the record steps of 'perf trace
+ record' and 'live-mode' variants; this isn't possible however for
+ <top-script> 'live-mode' or 'perf trace report' variants.
See the 'SEE ALSO' section for links to language-specific
information on how to write and run your own trace scripts.
OPTIONS
-------
+<command>...::
+ Any command you can specify in a shell.
+
-D::
--dump-raw-trace=::
Display verbose dump of the trace data.
Generate perf-trace.[ext] starter script for given language,
using current perf.data.
+-a::
+ Force system-wide collection. Scripts run without a <command>
+ normally use -a by default, while scripts run with a <command>
+ normally don't - this option allows the latter to be run in
+ system-wide mode.
+
+
SEE ALSO
--------
linkperf:perf-record[1], linkperf:perf-trace-perl[1],
static bool force, append_file;
-static const struct option options[] = {
+const struct option record_options[] = {
OPT_CALLBACK('e', "event", NULL, "event",
"event selector. use 'perf list' to list available events",
parse_events),
{
int i, j, err = -ENOMEM;
- argc = parse_options(argc, argv, options, record_usage,
+ argc = parse_options(argc, argv, record_options, record_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc && target_pid == -1 && target_tid == -1 &&
!system_wide && !cpu_list)
- usage_with_options(record_usage, options);
+ usage_with_options(record_usage, record_options);
if (force && append_file) {
fprintf(stderr, "Can't overwrite and append at the same time."
" You need to choose between -f and -A");
- usage_with_options(record_usage, options);
+ usage_with_options(record_usage, record_options);
} else if (append_file) {
write_mode = WRITE_APPEND;
} else {
if (thread_num <= 0) {
fprintf(stderr, "Can't find all threads of pid %d\n",
target_pid);
- usage_with_options(record_usage, options);
+ usage_with_options(record_usage, record_options);
}
} else {
all_tids=malloc(sizeof(pid_t));
static pid_t *all_tids = NULL;
static int thread_num = 0;
static bool inherit = false;
-static int profile_cpu = -1;
static int nr_cpus = 0;
static int realtime_prio = 0;
static bool group = false;
else
printf(" (all");
- if (profile_cpu != -1)
- printf(", cpu: %d)\n", profile_cpu);
+ if (cpu_list)
+ printf(", CPU%s: %s)\n", nr_cpus > 1 ? "s" : "", cpu_list);
else {
if (target_tid != -1)
printf(")\n");
else
- printf(", %d CPUs)\n", nr_cpus);
+ printf(", %d CPU%s)\n", nr_cpus, nr_cpus > 1 ? "s" : "");
}
printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
static void start_counter(int i, int counter)
{
struct perf_event_attr *attr;
- int cpu;
+ int cpu = -1;
int thread_index;
- cpu = profile_cpu;
- if (target_tid == -1 && profile_cpu == -1)
+ if (target_tid == -1)
cpu = cpumap[i];
attr = attrs + counter;
#include "util/symbol.h"
#include "util/thread.h"
#include "util/trace-event.h"
+#include "util/parse-options.h"
#include "util/util.h"
static char const *script_name;
static bool debug_mode;
static u64 last_timestamp;
static u64 nr_unordered;
+extern const struct option record_options[];
static int default_start_script(const char *script __unused,
int argc __unused,
{
struct script_desc *s = zalloc(sizeof(*s));
- if (s != NULL)
+ if (s != NULL && name)
s->name = strdup(name);
return s;
static void script_desc__delete(struct script_desc *s)
{
free(s->name);
+ free(s->half_liner);
+ free(s->args);
free(s);
}
return path;
}
+static bool is_top_script(const char *script_path)
+{
+ return ends_with((char *)script_path, "top") == NULL ? false : true;
+}
+
+static int has_required_arg(char *script_path)
+{
+ struct script_desc *desc;
+ int n_args = 0;
+ char *p;
+
+ desc = script_desc__new(NULL);
+
+ if (read_script_info(desc, script_path))
+ goto out;
+
+ if (!desc->args)
+ goto out;
+
+ for (p = desc->args; *p; p++)
+ if (*p == '<')
+ n_args++;
+out:
+ script_desc__delete(desc);
+
+ return n_args;
+}
+
static const char * const trace_usage[] = {
- "perf trace [<options>] <command>",
+ "perf trace [<options>]",
+ "perf trace [<options>] record <script> [<record-options>] <command>",
+ "perf trace [<options>] report <script> [script-args]",
+ "perf trace [<options>] <script> [<record-options>] <command>",
+ "perf trace [<options>] <top-script> [script-args]",
NULL
};
OPT_END()
};
+static bool have_cmd(int argc, const char **argv)
+{
+ char **__argv = malloc(sizeof(const char *) * argc);
+
+ if (!__argv)
+ die("malloc");
+ memcpy(__argv, argv, sizeof(const char *) * argc);
+ argc = parse_options(argc, (const char **)__argv, record_options,
+ NULL, PARSE_OPT_STOP_AT_NON_OPTION);
+ free(__argv);
+
+ return argc != 0;
+}
+
int cmd_trace(int argc, const char **argv, const char *prefix __used)
{
+ char *rec_script_path = NULL;
+ char *rep_script_path = NULL;
struct perf_session *session;
- const char *suffix = NULL;
+ char *script_path = NULL;
const char **__argv;
- char *script_path;
- int i, err;
+ bool system_wide;
+ int i, j, err;
- if (argc >= 2 && strncmp(argv[1], "rec", strlen("rec")) == 0) {
- if (argc < 3) {
- fprintf(stderr,
- "Please specify a record script\n");
- return -1;
- }
- suffix = RECORD_SUFFIX;
+ setup_scripting();
+
+ argc = parse_options(argc, argv, options, trace_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
+
+ if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) {
+ rec_script_path = get_script_path(argv[1], RECORD_SUFFIX);
+ if (!rec_script_path)
+ return cmd_record(argc, argv, NULL);
}
- if (argc >= 2 && strncmp(argv[1], "rep", strlen("rep")) == 0) {
- if (argc < 3) {
+ if (argc > 1 && !strncmp(argv[0], "rep", strlen("rep"))) {
+ rep_script_path = get_script_path(argv[1], REPORT_SUFFIX);
+ if (!rep_script_path) {
fprintf(stderr,
- "Please specify a report script\n");
+ "Please specify a valid report script"
+ "(see 'perf trace -l' for listing)\n");
return -1;
}
- suffix = REPORT_SUFFIX;
}
/* make sure PERF_EXEC_PATH is set for scripts */
perf_set_argv_exec_path(perf_exec_path());
- if (!suffix && argc >= 2 && strncmp(argv[1], "-", strlen("-")) != 0) {
- char *record_script_path, *report_script_path;
+ if (argc && !script_name && !rec_script_path && !rep_script_path) {
int live_pipe[2];
+ int rep_args;
pid_t pid;
- record_script_path = get_script_path(argv[1], RECORD_SUFFIX);
- if (!record_script_path) {
- fprintf(stderr, "record script not found\n");
- return -1;
+ rec_script_path = get_script_path(argv[0], RECORD_SUFFIX);
+ rep_script_path = get_script_path(argv[0], REPORT_SUFFIX);
+
+ if (!rec_script_path && !rep_script_path) {
+ fprintf(stderr, " Couldn't find script %s\n\n See perf"
+ " trace -l for available scripts.\n", argv[0]);
+ usage_with_options(trace_usage, options);
}
- report_script_path = get_script_path(argv[1], REPORT_SUFFIX);
- if (!report_script_path) {
- fprintf(stderr, "report script not found\n");
- return -1;
+ if (is_top_script(argv[0])) {
+ rep_args = argc - 1;
+ } else {
+ int rec_args;
+
+ rep_args = has_required_arg(rep_script_path);
+ rec_args = (argc - 1) - rep_args;
+ if (rec_args < 0) {
+ fprintf(stderr, " %s script requires options."
+ "\n\n See perf trace -l for available "
+ "scripts and options.\n", argv[0]);
+ usage_with_options(trace_usage, options);
+ }
}
if (pipe(live_pipe) < 0) {
}
if (!pid) {
+ system_wide = true;
+ j = 0;
+
dup2(live_pipe[1], 1);
close(live_pipe[0]);
- __argv = malloc(6 * sizeof(const char *));
- __argv[0] = "/bin/sh";
- __argv[1] = record_script_path;
- __argv[2] = "-q";
- __argv[3] = "-o";
- __argv[4] = "-";
- __argv[5] = NULL;
+ if (!is_top_script(argv[0]))
+ system_wide = !have_cmd(argc - rep_args,
+ &argv[rep_args]);
+
+ __argv = malloc((argc + 6) * sizeof(const char *));
+ if (!__argv)
+ die("malloc");
+
+ __argv[j++] = "/bin/sh";
+ __argv[j++] = rec_script_path;
+ if (system_wide)
+ __argv[j++] = "-a";
+ __argv[j++] = "-q";
+ __argv[j++] = "-o";
+ __argv[j++] = "-";
+ for (i = rep_args + 1; i < argc; i++)
+ __argv[j++] = argv[i];
+ __argv[j++] = NULL;
execvp("/bin/sh", (char **)__argv);
+ free(__argv);
exit(-1);
}
dup2(live_pipe[0], 0);
close(live_pipe[1]);
- __argv = malloc((argc + 3) * sizeof(const char *));
- __argv[0] = "/bin/sh";
- __argv[1] = report_script_path;
- for (i = 2; i < argc; i++)
- __argv[i] = argv[i];
- __argv[i++] = "-i";
- __argv[i++] = "-";
- __argv[i++] = NULL;
+ __argv = malloc((argc + 4) * sizeof(const char *));
+ if (!__argv)
+ die("malloc");
+ j = 0;
+ __argv[j++] = "/bin/sh";
+ __argv[j++] = rep_script_path;
+ for (i = 1; i < rep_args + 1; i++)
+ __argv[j++] = argv[i];
+ __argv[j++] = "-i";
+ __argv[j++] = "-";
+ __argv[j++] = NULL;
execvp("/bin/sh", (char **)__argv);
+ free(__argv);
exit(-1);
}
- if (suffix) {
- script_path = get_script_path(argv[2], suffix);
- if (!script_path) {
- fprintf(stderr, "script not found\n");
- return -1;
- }
-
- __argv = malloc((argc + 1) * sizeof(const char *));
- __argv[0] = "/bin/sh";
- __argv[1] = script_path;
- for (i = 3; i < argc; i++)
- __argv[i - 1] = argv[i];
- __argv[argc - 1] = NULL;
+ if (rec_script_path)
+ script_path = rec_script_path;
+ if (rep_script_path)
+ script_path = rep_script_path;
+
+ if (script_path) {
+ system_wide = false;
+ j = 0;
+
+ if (rec_script_path)
+ system_wide = !have_cmd(argc - 1, &argv[1]);
+
+ __argv = malloc((argc + 2) * sizeof(const char *));
+ if (!__argv)
+ die("malloc");
+ __argv[j++] = "/bin/sh";
+ __argv[j++] = script_path;
+ if (system_wide)
+ __argv[j++] = "-a";
+ for (i = 2; i < argc; i++)
+ __argv[j++] = argv[i];
+ __argv[j++] = NULL;
execvp("/bin/sh", (char **)__argv);
+ free(__argv);
exit(-1);
}
- setup_scripting();
-
- argc = parse_options(argc, argv, options, trace_usage,
- PARSE_OPT_STOP_AT_NON_OPTION);
-
if (symbol__init() < 0)
return -1;
if (!script_name)
#!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
#!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
#!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
#!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
#!/bin/bash
-perf record -a -e sched:sched_switch -e sched:sched_wakeup $@
+perf record -e sched:sched_switch -e sched:sched_wakeup $@
#!/bin/bash
-perf record -a -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
+perf record -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
#!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
#!/bin/bash
-perf record -a -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
+perf record -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
#!/bin/bash
-perf record -a -e net:net_dev_xmit -e net:net_dev_queue \
+perf record -e net:net_dev_xmit -e net:net_dev_queue \
-e net:netif_receive_skb -e net:netif_rx \
-e skb:consume_skb -e skb:kfree_skb \
-e skb:skb_copy_datagram_iovec -e napi:napi_poll \
#!/bin/bash
-perf record -m 16384 -a -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
+perf record -m 16384 -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
#!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
#!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
#!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
return rc;
}
+static const char yes[] = "Yes", no[] = "No";
+
bool ui__dialog_yesno(const char *msg)
{
/* newtWinChoice should really be accepting const char pointers... */
- char yes[] = "Yes", no[] = "No";
- return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
+ return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1;
}
projects / mv-sheeva.git / commitdiff