ARM: dts: omap4-panda-common: remove unneded unit names

This patch fixes the following DTC warnings for omap4-panda.dtb,
omap4-panda-a4.dtb and omap4-panda-es.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"encoder@1 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index e1d606f64cb79444fab184560c54eef2c5b18ef3..f8f13952cfeb1efabca2dab71cc9152fcf1e29a0 100644 (file)
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -103,7 +103,7 @@
                enable-active-high;
        };
 
-       tfp410: encoder@0 {
+       tfp410: encoder0 {
                compatible = "ti,tfp410";
                powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;   /* gpio_0 */
 
@@ -114,7 +114,7 @@
                        port@0 {
                                reg = <0>;
 
-                               tfp410_in: endpoint@0 {
+                               tfp410_in: endpoint {
                                        remote-endpoint = <&dpi_out>;
                                };
                        };
@@ -122,14 +122,14 @@
                        port@1 {
                                reg = <1>;
 
-                               tfp410_out: endpoint@0 {
+                               tfp410_out: endpoint {
                                        remote-endpoint = <&dvi_connector_in>;
                                };
                        };
                };
        };
 
-       dvi0: connector@0 {
+       dvi0: connector0 {
                compatible = "dvi-connector";
                label = "dvi";
 
@@ -144,7 +144,7 @@
                };
        };
 
-       tpd12s015: encoder@1 {
+       tpd12s015: encoder1 {
                compatible = "ti,tpd12s015";
 
                gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,   /* 60, CT CP HPD */
@@ -158,7 +158,7 @@
                        port@0 {
                                reg = <0>;
 
-                               tpd12s015_in: endpoint@0 {
+                               tpd12s015_in: endpoint {
                                        remote-endpoint = <&hdmi_out>;
                                };
                        };
@@ -166,14 +166,14 @@
                        port@1 {
                                reg = <1>;
 
-                               tpd12s015_out: endpoint@0 {
+                               tpd12s015_out: endpoint {
                                        remote-endpoint = <&hdmi_connector_in>;
                                };
                        };
                };
        };
 
-       hdmi0: connector@1 {
+       hdmi0: connector1 {
                compatible = "hdmi-connector";
                label = "hdmi";