ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS

Copy the device nodes from KZM9D reference into the KZM9D
device tree file. This will allow us to use a single DTS
file regarless of kernel configuration. In case of legacy
C board code the device nodes may or may not be used, but
in the multiplatform case all the DT device nodes are used.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index f92e812fdd9f3f5b00c7fc0f187e3b75eb90e8b4..861aa7d6fc7dbc480c0b9d6b185d6a291d38fcd2 100644 (file)
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for the KZM9D board
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2013 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -23,4 +23,35 @@
        chosen {
                bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
        };
+
+       reg_1p8v: regulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       reg_3p3v: regulator@1 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       lan9220@20000000 {
+               compatible = "smsc,lan9220", "smsc,lan9115";
+               reg = <0x20000000 0x10000>;
+               phy-mode = "mii";
+               interrupt-parent = <&gpio0>;
+               interrupts = <1 1>;     /* active high */
+               reg-io-width = <4>;
+               smsc,irq-active-high;
+               smsc,irq-push-pull;
+               vddvario-supply = <&reg_1p8v>;
+               vdd33a-supply = <&reg_3p3v>;
+       };
 };