}
/**
- * Microframe scheduler
- * track the total use in hsotg->frame_usecs
- * keep each qh use in qh->frame_usecs
- * when surrendering the qh then donate the time back
+ * pmap_schedule() - Schedule time in a periodic bitmap (pmap).
+ *
+ * @map: The bitmap representing the schedule; will be updated
+ * upon success.
+ * @bits_per_period: The schedule represents several periods. This is how many
+ * bits are in each period. It's assumed that the beginning
+ * of the schedule will repeat after its end.
+ * @periods_in_map: The number of periods in the schedule.
+ * @num_bits: The number of bits we need per period we want to reserve
+ * in this function call.
+ * @interval: How often we need to be scheduled for the reservation this
+ * time. 1 means every period. 2 means every other period.
+ * ...you get the picture?
+ * @start: The bit number to start at. Normally 0. Must be within
+ * the interval or we return failure right away.
+ * @only_one_period: Normally we'll allow picking a start anywhere within the
+ * first interval, since we can still make all repetition
+ * requirements by doing that. However, if you pass true
+ * here then we'll return failure if we can't fit within
+ * the period that "start" is in.
+ *
+ * The idea here is that we want to schedule time for repeating events that all
+ * want the same resource. The resource is divided into fixed-sized periods
+ * and the events want to repeat every "interval" periods. The schedule
+ * granularity is one bit.
+ *
+ * To keep things "simple", we'll represent our schedule with a bitmap that
+ * contains a fixed number of periods. This gets rid of a lot of complexity
+ * but does mean that we need to handle things specially (and non-ideally) if
+ * the number of the periods in the schedule doesn't match well with the
+ * intervals that we're trying to schedule.
+ *
+ * Here's an explanation of the scheme we'll implement, assuming 8 periods.
+ * - If interval is 1, we need to take up space in each of the 8
+ * periods we're scheduling. Easy.
+ * - If interval is 2, we need to take up space in half of the
+ * periods. Again, easy.
+ * - If interval is 3, we actually need to fall back to interval 1.
+ * Why? Because we might need time in any period. AKA for the
+ * first 8 periods, we'll be in slot 0, 3, 6. Then we'll be
+ * in slot 1, 4, 7. Then we'll be in 2, 5. Then we'll be back to
+ * 0, 3, and 6. Since we could be in any frame we need to reserve
+ * for all of them. Sucks, but that's what you gotta do. Note that
+ * if we were instead scheduling 8 * 3 = 24 we'd do much better, but
+ * then we need more memory and time to do scheduling.
+ * - If interval is 4, easy.
+ * - If interval is 5, we again need interval 1. The schedule will be
+ * 0, 5, 2, 7, 4, 1, 6, 3, 0
+ * - If interval is 6, we need interval 2. 0, 6, 4, 2.
+ * - If interval is 7, we need interval 1.
+ * - If interval is 8, we need interval 8.
+ *
+ * If you do the math, you'll see that we need to pretend that interval is
+ * equal to the greatest_common_divisor(interval, periods_in_map).
+ *
+ * Note that at the moment this function tends to front-pack the schedule.
+ * In some cases that's really non-ideal (it's hard to schedule things that
+ * need to repeat every period). In other cases it's perfect (you can easily
+ * schedule bigger, less often repeating things).
+ *
+ * Here's the algorithm in action (8 periods, 5 bits per period):
+ * |** | |** | |** | |** | | OK 2 bits, intv 2 at 0
+ * |*****| ***|*****| ***|*****| ***|*****| ***| OK 3 bits, intv 3 at 2
+ * |*****|* ***|*****| ***|*****|* ***|*****| ***| OK 1 bits, intv 4 at 5
+ * |** |* |** | |** |* |** | | Remv 3 bits, intv 3 at 2
+ * |*** |* |*** | |*** |* |*** | | OK 1 bits, intv 6 at 2
+ * |**** |* * |**** | * |**** |* * |**** | * | OK 1 bits, intv 1 at 3
+ * |**** |**** |**** | *** |**** |**** |**** | *** | OK 2 bits, intv 2 at 6
+ * |*****|*****|*****| ****|*****|*****|*****| ****| OK 1 bits, intv 1 at 4
+ * |*****|*****|*****| ****|*****|*****|*****| ****| FAIL 1 bits, intv 1
+ * | ***|*****| ***| ****| ***|*****| ***| ****| Remv 2 bits, intv 2 at 0
+ * | ***| ****| ***| ****| ***| ****| ***| ****| Remv 1 bits, intv 4 at 5
+ * | **| ****| **| ****| **| ****| **| ****| Remv 1 bits, intv 6 at 2
+ * | *| ** *| *| ** *| *| ** *| *| ** *| Remv 1 bits, intv 1 at 3
+ * | *| *| *| *| *| *| *| *| Remv 2 bits, intv 2 at 6
+ * | | | | | | | | | Remv 1 bits, intv 1 at 4
+ * |** | |** | |** | |** | | OK 2 bits, intv 2 at 0
+ * |*** | |** | |*** | |** | | OK 1 bits, intv 4 at 2
+ * |*****| |** **| |*****| |** **| | OK 2 bits, intv 2 at 3
+ * |*****|* |** **| |*****|* |** **| | OK 1 bits, intv 4 at 5
+ * |*****|*** |** **| ** |*****|*** |** **| ** | OK 2 bits, intv 2 at 6
+ * |*****|*****|** **| ****|*****|*****|** **| ****| OK 2 bits, intv 2 at 8
+ * |*****|*****|*****| ****|*****|*****|*****| ****| OK 1 bits, intv 4 at 12
+ *
+ * This function is pretty generic and could be easily abstracted if anything
+ * needed similar scheduling.
+ *
+ * Returns either -ENOSPC or a >= 0 start bit which should be passed to the
+ * unschedule routine. The map bitmap will be updated on a non-error result.
*/
-static const unsigned short max_uframe_usecs[] = {
- 100, 100, 100, 100, 100, 100, 30, 0
-};
+static int pmap_schedule(unsigned long *map, int bits_per_period,
+ int periods_in_map, int num_bits,
+ int interval, int start, bool only_one_period)
+{
+ int interval_bits;
+ int to_reserve;
+ int first_end;
+ int i;
+
+ if (num_bits > bits_per_period)
+ return -ENOSPC;
+
+ /* Adjust interval as per description */
+ interval = gcd(interval, periods_in_map);
+
+ interval_bits = bits_per_period * interval;
+ to_reserve = periods_in_map / interval;
+
+ /* If start has gotten us past interval then we can't schedule */
+ if (start >= interval_bits)
+ return -ENOSPC;
+
+ if (only_one_period)
+ /* Must fit within same period as start; end at begin of next */
+ first_end = (start / bits_per_period + 1) * bits_per_period;
+ else
+ /* Can fit anywhere in the first interval */
+ first_end = interval_bits;
+
+ /*
+ * We'll try to pick the first repetition, then see if that time
+ * is free for each of the subsequent repetitions. If it's not
+ * we'll adjust the start time for the next search of the first
+ * repetition.
+ */
+ while (start + num_bits <= first_end) {
+ int end;
+
+ /* Need to stay within this period */
+ end = (start / bits_per_period + 1) * bits_per_period;
+
+ /* Look for num_bits us in this microframe starting at start */
+ start = bitmap_find_next_zero_area(map, end, start, num_bits,
+ 0);
+
+ /*
+ * We should get start >= end if we fail. We might be
+ * able to check the next microframe depending on the
+ * interval, so continue on (start already updated).
+ */
+ if (start >= end) {
+ start = end;
+ continue;
+ }
+
+ /* At this point we have a valid point for first one */
+ for (i = 1; i < to_reserve; i++) {
+ int ith_start = start + interval_bits * i;
+ int ith_end = end + interval_bits * i;
+ int ret;
+
+ /* Use this as a dumb "check if bits are 0" */
+ ret = bitmap_find_next_zero_area(
+ map, ith_start + num_bits, ith_start, num_bits,
+ 0);
+
+ /* We got the right place, continue checking */
+ if (ret == ith_start)
+ continue;
+
+ /* Move start up for next time and exit for loop */
+ ith_start = bitmap_find_next_zero_area(
+ map, ith_end, ith_start, num_bits, 0);
+ if (ith_start >= ith_end)
+ /* Need a while new period next time */
+ start = end;
+ else
+ start = ith_start - interval_bits * i;
+ break;
+ }
+
+ /* If didn't exit the for loop with a break, we have success */
+ if (i == to_reserve)
+ break;
+ }
+
+ if (start + num_bits > first_end)
+ return -ENOSPC;
-void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg)
+ for (i = 0; i < to_reserve; i++) {
+ int ith_start = start + interval_bits * i;
+
+ bitmap_set(map, ith_start, num_bits);
+ }
+
+ return start;
+}
+
+/**
+ * pmap_unschedule() - Undo work done by pmap_schedule()
+ *
+ * @map: See pmap_schedule().
+ * @bits_per_period: See pmap_schedule().
+ * @periods_in_map: See pmap_schedule().
+ * @num_bits: The number of bits that was passed to schedule.
+ * @interval: The interval that was passed to schedule.
+ * @start: The return value from pmap_schedule().
+ */
+static void pmap_unschedule(unsigned long *map, int bits_per_period,
+ int periods_in_map, int num_bits,
+ int interval, int start)
{
+ int interval_bits;
+ int to_release;
int i;
- for (i = 0; i < 8; i++)
- hsotg->frame_usecs[i] = max_uframe_usecs[i];
+ /* Adjust interval as per description in pmap_schedule() */
+ interval = gcd(interval, periods_in_map);
+
+ interval_bits = bits_per_period * interval;
+ to_release = periods_in_map / interval;
+
+ for (i = 0; i < to_release; i++) {
+ int ith_start = start + interval_bits * i;
+
+ bitmap_clear(map, ith_start, num_bits);
+ }
}
-static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+/*
+ * cat_printf() - A printf() + strcat() helper
+ *
+ * This is useful for concatenating a bunch of strings where each string is
+ * constructed using printf.
+ *
+ * @buf: The destination buffer; will be updated to point after the printed
+ * data.
+ * @size: The number of bytes in the buffer (includes space for '\0').
+ * @fmt: The format for printf.
+ * @...: The args for printf.
+ */
+static void cat_printf(char **buf, size_t *size, const char *fmt, ...)
{
- unsigned short utime = qh->host_us;
+ va_list args;
int i;
- for (i = 0; i < 8; i++) {
- /* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */
- if (utime <= hsotg->frame_usecs[i]) {
- hsotg->frame_usecs[i] -= utime;
- qh->frame_usecs[i] += utime;
- return i;
- }
+ if (*size == 0)
+ return;
+
+ va_start(args, fmt);
+ i = vsnprintf(*buf, *size, fmt, args);
+ va_end(args);
+
+ if (i >= *size) {
+ (*buf)[*size - 1] = '\0';
+ *buf += *size;
+ *size = 0;
+ } else {
+ *buf += i;
+ *size -= i;
}
- return -ENOSPC;
}
/*
- * use this for FS apps that can span multiple uframes
+ * pmap_print() - Print the given periodic map
+ *
+ * Will attempt to print out the periodic schedule.
+ *
+ * @map: See pmap_schedule().
+ * @bits_per_period: See pmap_schedule().
+ * @periods_in_map: See pmap_schedule().
+ * @period_name: The name of 1 period, like "uFrame"
+ * @units: The name of the units, like "us".
+ * @print_fn: The function to call for printing.
+ * @print_data: Opaque data to pass to the print function.
*/
-static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+static void pmap_print(unsigned long *map, int bits_per_period,
+ int periods_in_map, const char *period_name,
+ const char *units,
+ void (*print_fn)(const char *str, void *data),
+ void *print_data)
{
- unsigned short utime = qh->host_us;
- unsigned short xtime;
- int t_left;
+ int period;
+
+ for (period = 0; period < periods_in_map; period++) {
+ char tmp[64];
+ char *buf = tmp;
+ size_t buf_size = sizeof(tmp);
+ int period_start = period * bits_per_period;
+ int period_end = period_start + bits_per_period;
+ int start = 0;
+ int count = 0;
+ bool printed = false;
+ int i;
+
+ for (i = period_start; i < period_end + 1; i++) {
+ /* Handle case when ith bit is set */
+ if (i < period_end &&
+ bitmap_find_next_zero_area(map, i + 1,
+ i, 1, 0) != i) {
+ if (count == 0)
+ start = i - period_start;
+ count++;
+ continue;
+ }
+
+ /* ith bit isn't set; don't care if count == 0 */
+ if (count == 0)
+ continue;
+
+ if (!printed)
+ cat_printf(&buf, &buf_size, "%s %d: ",
+ period_name, period);
+ else
+ cat_printf(&buf, &buf_size, ", ");
+ printed = true;
+
+ cat_printf(&buf, &buf_size, "%d %s -%3d %s", start,
+ units, start + count - 1, units);
+ count = 0;
+ }
+
+ if (printed)
+ print_fn(tmp, print_data);
+ }
+}
+
+/**
+ * dwc2_get_ls_map() - Get the map used for the given qh
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ *
+ * We'll always get the periodic map out of our TT. Note that even if we're
+ * running the host straight in low speed / full speed mode it appears as if
+ * a TT is allocated for us, so we'll use it. If that ever changes we can
+ * add logic here to get a map out of "hsotg" if !qh->do_split.
+ *
+ * Returns: the map or NULL if a map couldn't be found.
+ */
+static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ unsigned long *map;
+
+ /* Don't expect to be missing a TT and be doing low speed scheduling */
+ if (WARN_ON(!qh->dwc_tt))
+ return NULL;
+
+ /* Get the map and adjust if this is a multi_tt hub */
+ map = qh->dwc_tt->periodic_bitmaps;
+ if (qh->dwc_tt->usb_tt->multi)
+ map += DWC2_ELEMENTS_PER_LS_BITMAP * qh->ttport;
+
+ return map;
+}
+
+struct dwc2_qh_print_data {
+ struct dwc2_hsotg *hsotg;
+ struct dwc2_qh *qh;
+};
+
+/**
+ * dwc2_qh_print() - Helper function for dwc2_qh_schedule_print()
+ *
+ * @str: The string to print
+ * @data: A pointer to a struct dwc2_qh_print_data
+ */
+static void dwc2_qh_print(const char *str, void *data)
+{
+ struct dwc2_qh_print_data *print_data = data;
+
+ dwc2_sch_dbg(print_data->hsotg, "QH=%p ...%s\n", print_data->qh, str);
+}
+
+/**
+ * dwc2_qh_schedule_print() - Print the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH to print.
+ */
+static void dwc2_qh_schedule_print(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ struct dwc2_qh_print_data print_data = { hsotg, qh };
int i;
- int j;
- int k;
- for (i = 0; i < 8; i++) {
- if (hsotg->frame_usecs[i] <= 0)
+ /*
+ * The printing functions are quite slow and inefficient.
+ * If we don't have tracing turned on, don't run unless the special
+ * define is turned on.
+ */
+#ifndef DWC2_PRINT_SCHEDULE
+ return;
+#endif
+
+ if (qh->schedule_low_speed) {
+ unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+
+ dwc2_sch_dbg(hsotg, "QH=%p LS/FS trans: %d=>%d us @ %d us",
+ qh, qh->device_us,
+ DWC2_ROUND_US_TO_SLICE(qh->device_us),
+ DWC2_US_PER_SLICE * qh->ls_start_schedule_slice);
+
+ if (map) {
+ dwc2_sch_dbg(hsotg,
+ "QH=%p Whole low/full speed map %p now:\n",
+ qh, map);
+ pmap_print(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+ DWC2_LS_SCHEDULE_FRAMES, "Frame ", "slices",
+ dwc2_qh_print, &print_data);
+ }
+ }
+
+ for (i = 0; i < qh->num_hs_transfers; i++) {
+ struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + i;
+ int uframe = trans_time->start_schedule_us /
+ DWC2_HS_PERIODIC_US_PER_UFRAME;
+ int rel_us = trans_time->start_schedule_us %
+ DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+ dwc2_sch_dbg(hsotg,
+ "QH=%p HS trans #%d: %d us @ uFrame %d + %d us\n",
+ qh, i, trans_time->duration_us, uframe, rel_us);
+ }
+ if (qh->num_hs_transfers) {
+ dwc2_sch_dbg(hsotg, "QH=%p Whole high speed map now:\n", qh);
+ pmap_print(hsotg->hs_periodic_bitmap,
+ DWC2_HS_PERIODIC_US_PER_UFRAME,
+ DWC2_HS_SCHEDULE_UFRAMES, "uFrame", "us",
+ dwc2_qh_print, &print_data);
+ }
+
+}
+
+/**
+ * dwc2_ls_pmap_schedule() - Schedule a low speed QH
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ * @search_slice: We'll start trying to schedule at the passed slice.
+ * Remember that slices are the units of the low speed
+ * schedule (think 25us or so).
+ *
+ * Wraps pmap_schedule() with the right parameters for low speed scheduling.
+ *
+ * Normally we schedule low speed devices on the map associated with the TT.
+ *
+ * Returns: 0 for success or an error code.
+ */
+static int dwc2_ls_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ int search_slice)
+{
+ int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE);
+ unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+ int slice;
+
+ if (map == NULL)
+ return -EINVAL;
+
+ /*
+ * Schedule on the proper low speed map with our low speed scheduling
+ * parameters. Note that we use the "device_interval" here since
+ * we want the low speed interval and the only way we'd be in this
+ * function is if the device is low speed.
+ *
+ * If we happen to be doing low speed and high speed scheduling for the
+ * same transaction (AKA we have a split) we always do low speed first.
+ * That means we can always pass "false" for only_one_period (that
+ * parameters is only useful when we're trying to get one schedule to
+ * match what we already planned in the other schedule).
+ */
+ slice = pmap_schedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+ DWC2_LS_SCHEDULE_FRAMES, slices,
+ qh->device_interval, search_slice, false);
+
+ if (slice < 0)
+ return slice;
+
+ qh->ls_start_schedule_slice = slice;
+ return 0;
+}
+
+/**
+ * dwc2_ls_pmap_unschedule() - Undo work done by dwc2_ls_pmap_schedule()
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static void dwc2_ls_pmap_unschedule(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE);
+ unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+
+ /* Schedule should have failed, so no worries about no error code */
+ if (map == NULL)
+ return;
+
+ pmap_unschedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+ DWC2_LS_SCHEDULE_FRAMES, slices, qh->device_interval,
+ qh->ls_start_schedule_slice);
+}
+
+/**
+ * dwc2_hs_pmap_schedule - Schedule in the main high speed schedule
+ *
+ * This will schedule something on the main dwc2 schedule.
+ *
+ * We'll start looking in qh->hs_transfers[index].start_schedule_us. We'll
+ * update this with the result upon success. We also use the duration from
+ * the same structure.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ * @only_one_period: If true we will limit ourselves to just looking at
+ * one period (aka one 100us chunk). This is used if we have
+ * already scheduled something on the low speed schedule and
+ * need to find something that matches on the high speed one.
+ * @index: The index into qh->hs_transfers that we're working with.
+ *
+ * Returns: 0 for success or an error code. Upon success the
+ * dwc2_hs_transfer_time specified by "index" will be updated.
+ */
+static int dwc2_hs_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ bool only_one_period, int index)
+{
+ struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index;
+ int us;
+
+ us = pmap_schedule(hsotg->hs_periodic_bitmap,
+ DWC2_HS_PERIODIC_US_PER_UFRAME,
+ DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us,
+ qh->host_interval, trans_time->start_schedule_us,
+ only_one_period);
+
+ if (us < 0)
+ return us;
+
+ trans_time->start_schedule_us = us;
+ return 0;
+}
+
+/**
+ * dwc2_ls_pmap_unschedule() - Undo work done by dwc2_hs_pmap_schedule()
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh, int index)
+{
+ struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index;
+
+ pmap_unschedule(hsotg->hs_periodic_bitmap,
+ DWC2_HS_PERIODIC_US_PER_UFRAME,
+ DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us,
+ qh->host_interval, trans_time->start_schedule_us);
+}
+
+/**
+ * dwc2_uframe_schedule_split - Schedule a QH for a periodic split xfer.
+ *
+ * This is the most complicated thing in USB. We have to find matching time
+ * in both the global high speed schedule for the port and the low speed
+ * schedule for the TT associated with the given device.
+ *
+ * Being here means that the host must be running in high speed mode and the
+ * device is in low or full speed mode (and behind a hub).
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+ int ls_search_slice;
+ int err = 0;
+ int host_interval_in_sched;
+
+ /*
+ * The interval (how often to repeat) in the actual host schedule.
+ * See pmap_schedule() for gcd() explanation.
+ */
+ host_interval_in_sched = gcd(qh->host_interval,
+ DWC2_HS_SCHEDULE_UFRAMES);
+
+ /*
+ * We always try to find space in the low speed schedule first, then
+ * try to find high speed time that matches. If we don't, we'll bump
+ * up the place we start searching in the low speed schedule and try
+ * again. To start we'll look right at the beginning of the low speed
+ * schedule.
+ *
+ * Note that this will tend to front-load the high speed schedule.
+ * We may eventually want to try to avoid this by either considering
+ * both schedules together or doing some sort of round robin.
+ */
+ ls_search_slice = 0;
+
+ while (ls_search_slice < DWC2_LS_SCHEDULE_SLICES) {
+ int start_s_uframe;
+ int ssplit_s_uframe;
+ int second_s_uframe;
+ int rel_uframe;
+ int first_count;
+ int middle_count;
+ int end_count;
+ int first_data_bytes;
+ int other_data_bytes;
+ int i;
+
+ if (qh->schedule_low_speed) {
+ err = dwc2_ls_pmap_schedule(hsotg, qh, ls_search_slice);
+
+ /*
+ * If we got an error here there's no other magic we
+ * can do, so bail. All the looping above is only
+ * helpful to redo things if we got a low speed slot
+ * and then couldn't find a matching high speed slot.
+ */
+ if (err)
+ return err;
+ } else {
+ /* Must be missing the tt structure? Why? */
+ WARN_ON_ONCE(1);
+ }
+
+ /*
+ * This will give us a number 0 - 7 if
+ * DWC2_LS_SCHEDULE_FRAMES == 1, or 0 - 15 if == 2, or ...
+ */
+ start_s_uframe = qh->ls_start_schedule_slice /
+ DWC2_SLICES_PER_UFRAME;
+
+ /* Get a number that's always 0 - 7 */
+ rel_uframe = (start_s_uframe % 8);
+
+ /*
+ * If we were going to start in uframe 7 then we would need to
+ * issue a start split in uframe 6, which spec says is not OK.
+ * Move on to the next full frame (assuming there is one).
+ *
+ * See 11.18.4 Host Split Transaction Scheduling Requirements
+ * bullet 1.
+ */
+ if (rel_uframe == 7) {
+ if (qh->schedule_low_speed)
+ dwc2_ls_pmap_unschedule(hsotg, qh);
+ ls_search_slice =
+ (qh->ls_start_schedule_slice /
+ DWC2_LS_PERIODIC_SLICES_PER_FRAME + 1) *
+ DWC2_LS_PERIODIC_SLICES_PER_FRAME;
continue;
+ }
/*
- * we need n consecutive slots so use j as a start slot
- * j plus j+1 must be enough time (for now)
+ * For ISOC in:
+ * - start split (frame -1)
+ * - complete split w/ data (frame +1)
+ * - complete split w/ data (frame +2)
+ * - ...
+ * - complete split w/ data (frame +num_data_packets)
+ * - complete split w/ data (frame +num_data_packets+1)
+ * - complete split w/ data (frame +num_data_packets+2, max 8)
+ * ...though if frame was "0" then max is 7...
+ *
+ * For ISOC out we might need to do:
+ * - start split w/ data (frame -1)
+ * - start split w/ data (frame +0)
+ * - ...
+ * - start split w/ data (frame +num_data_packets-2)
+ *
+ * For INTERRUPT in we might need to do:
+ * - start split (frame -1)
+ * - complete split w/ data (frame +1)
+ * - complete split w/ data (frame +2)
+ * - complete split w/ data (frame +3, max 8)
+ *
+ * For INTERRUPT out we might need to do:
+ * - start split w/ data (frame -1)
+ * - complete split (frame +1)
+ * - complete split (frame +2)
+ * - complete split (frame +3, max 8)
+ *
+ * Start adjusting!
*/
- xtime = hsotg->frame_usecs[i];
- for (j = i + 1; j < 8; j++) {
- /*
- * if we add this frame remaining time to xtime we may
- * be OK, if not we need to test j for a complete frame
- */
- if (xtime + hsotg->frame_usecs[j] < utime) {
- if (hsotg->frame_usecs[j] <
- max_uframe_usecs[j])
- continue;
+ ssplit_s_uframe = (start_s_uframe +
+ host_interval_in_sched - 1) %
+ host_interval_in_sched;
+ if (qh->ep_type == USB_ENDPOINT_XFER_ISOC && !qh->ep_is_in)
+ second_s_uframe = start_s_uframe;
+ else
+ second_s_uframe = start_s_uframe + 1;
+
+ /* First data transfer might not be all 188 bytes. */
+ first_data_bytes = 188 -
+ DIV_ROUND_UP(188 * (qh->ls_start_schedule_slice %
+ DWC2_SLICES_PER_UFRAME),
+ DWC2_SLICES_PER_UFRAME);
+ if (first_data_bytes > bytecount)
+ first_data_bytes = bytecount;
+ other_data_bytes = bytecount - first_data_bytes;
+
+ /*
+ * For now, skip OUT xfers where first xfer is partial
+ *
+ * Main dwc2 code assumes:
+ * - INT transfers never get split in two.
+ * - ISOC transfers can always transfer 188 bytes the first
+ * time.
+ *
+ * Until that code is fixed, try again if the first transfer
+ * couldn't transfer everything.
+ *
+ * This code can be removed if/when the rest of dwc2 handles
+ * the above cases. Until it's fixed we just won't be able
+ * to schedule quite as tightly.
+ */
+ if (!qh->ep_is_in &&
+ (first_data_bytes != min_t(int, 188, bytecount))) {
+ dwc2_sch_dbg(hsotg,
+ "QH=%p avoiding broken 1st xfer (%d, %d)\n",
+ qh, first_data_bytes, bytecount);
+ if (qh->schedule_low_speed)
+ dwc2_ls_pmap_unschedule(hsotg, qh);
+ ls_search_slice = (start_s_uframe + 1) *
+ DWC2_SLICES_PER_UFRAME;
+ continue;
+ }
+
+ /* Start by assuming transfers for the bytes */
+ qh->num_hs_transfers = 1 + DIV_ROUND_UP(other_data_bytes, 188);
+
+ /*
+ * Everything except ISOC OUT has extra transfers. Rules are
+ * complicated. See 11.18.4 Host Split Transaction Scheduling
+ * Requirements bullet 3.
+ */
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
+ if (rel_uframe == 6)
+ qh->num_hs_transfers += 2;
+ else
+ qh->num_hs_transfers += 3;
+
+ if (qh->ep_is_in) {
+ /*
+ * First is start split, middle/end is data.
+ * Allocate full data bytes for all data.
+ */
+ first_count = 4;
+ middle_count = bytecount;
+ end_count = bytecount;
+ } else {
+ /*
+ * First is data, middle/end is complete.
+ * First transfer and second can have data.
+ * Rest should just have complete split.
+ */
+ first_count = first_data_bytes;
+ middle_count = max_t(int, 4, other_data_bytes);
+ end_count = 4;
}
- if (xtime >= utime) {
- t_left = utime;
- for (k = i; k < 8; k++) {
- t_left -= hsotg->frame_usecs[k];
- if (t_left <= 0) {
- qh->frame_usecs[k] +=
- hsotg->frame_usecs[k]
- + t_left;
- hsotg->frame_usecs[k] = -t_left;
- return i;
- } else {
- qh->frame_usecs[k] +=
- hsotg->frame_usecs[k];
- hsotg->frame_usecs[k] = 0;
- }
- }
+ } else {
+ if (qh->ep_is_in) {
+ int last;
+
+ /* Account for the start split */
+ qh->num_hs_transfers++;
+
+ /* Calculate "L" value from spec */
+ last = rel_uframe + qh->num_hs_transfers + 1;
+
+ /* Start with basic case */
+ if (last <= 6)
+ qh->num_hs_transfers += 2;
+ else
+ qh->num_hs_transfers += 1;
+
+ /* Adjust downwards */
+ if (last >= 6 && rel_uframe == 0)
+ qh->num_hs_transfers--;
+
+ /* 1st = start; rest can contain data */
+ first_count = 4;
+ middle_count = min_t(int, 188, bytecount);
+ end_count = middle_count;
+ } else {
+ /* All contain data, last might be smaller */
+ first_count = first_data_bytes;
+ middle_count = min_t(int, 188,
+ other_data_bytes);
+ end_count = other_data_bytes % 188;
}
- /* add the frame time to x time */
- xtime += hsotg->frame_usecs[j];
- /* we must have a fully available next frame or break */
- if (xtime < utime &&
- hsotg->frame_usecs[j] == max_uframe_usecs[j])
- continue;
}
+
+ /* Assign durations per uFrame */
+ qh->hs_transfers[0].duration_us = HS_USECS_ISO(first_count);
+ for (i = 1; i < qh->num_hs_transfers - 1; i++)
+ qh->hs_transfers[i].duration_us =
+ HS_USECS_ISO(middle_count);
+ if (qh->num_hs_transfers > 1)
+ qh->hs_transfers[qh->num_hs_transfers - 1].duration_us =
+ HS_USECS_ISO(end_count);
+
+ /*
+ * Assign start us. The call below to dwc2_hs_pmap_schedule()
+ * will start with these numbers but may adjust within the same
+ * microframe.
+ */
+ qh->hs_transfers[0].start_schedule_us =
+ ssplit_s_uframe * DWC2_HS_PERIODIC_US_PER_UFRAME;
+ for (i = 1; i < qh->num_hs_transfers; i++)
+ qh->hs_transfers[i].start_schedule_us =
+ ((second_s_uframe + i - 1) %
+ DWC2_HS_SCHEDULE_UFRAMES) *
+ DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+ /* Try to schedule with filled in hs_transfers above */
+ for (i = 0; i < qh->num_hs_transfers; i++) {
+ err = dwc2_hs_pmap_schedule(hsotg, qh, true, i);
+ if (err)
+ break;
+ }
+
+ /* If we scheduled all w/out breaking out then we're all good */
+ if (i == qh->num_hs_transfers)
+ break;
+
+ for (; i >= 0; i--)
+ dwc2_hs_pmap_unschedule(hsotg, qh, i);
+
+ if (qh->schedule_low_speed)
+ dwc2_ls_pmap_unschedule(hsotg, qh);
+
+ /* Try again starting in the next microframe */
+ ls_search_slice = (start_s_uframe + 1) * DWC2_SLICES_PER_UFRAME;
}
- return -ENOSPC;
+
+ if (ls_search_slice >= DWC2_LS_SCHEDULE_SLICES)
+ return -ENOSPC;
+
+ return 0;
}
-static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+/**
+ * dwc2_uframe_schedule_hs - Schedule a QH for a periodic high speed xfer.
+ *
+ * Basically this just wraps dwc2_hs_pmap_schedule() to provide a clean
+ * interface.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_hs(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ /* In non-split host and device time are the same */
+ WARN_ON(qh->host_us != qh->device_us);
+ WARN_ON(qh->host_interval != qh->device_interval);
+ WARN_ON(qh->num_hs_transfers != 1);
+
+ /* We'll have one transfer; init start to 0 before calling scheduler */
+ qh->hs_transfers[0].start_schedule_us = 0;
+ qh->hs_transfers[0].duration_us = qh->host_us;
+
+ return dwc2_hs_pmap_schedule(hsotg, qh, false, 0);
+}
+
+/**
+ * dwc2_uframe_schedule_ls - Schedule a QH for a periodic low/full speed xfer.
+ *
+ * Basically this just wraps dwc2_ls_pmap_schedule() to provide a clean
+ * interface.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_ls(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ /* In non-split host and device time are the same */
+ WARN_ON(qh->host_us != qh->device_us);
+ WARN_ON(qh->host_interval != qh->device_interval);
+ WARN_ON(!qh->schedule_low_speed);
+
+ /* Run on the main low speed schedule (no split = no hub = no TT) */
+ return dwc2_ls_pmap_schedule(hsotg, qh, 0);
+}
+
+/**
+ * dwc2_uframe_schedule - Schedule a QH for a periodic xfer.
+ *
+ * Calls one of the 3 sub-function depending on what type of transfer this QH
+ * is for. Also adds some printing.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
{
int ret;
- if (qh->dev_speed == USB_SPEED_HIGH) {
- /* if this is a hs transaction we need a full frame */
- ret = dwc2_find_single_uframe(hsotg, qh);
- } else {
- /*
- * if this is a fs transaction we may need a sequence
- * of frames
- */
- ret = dwc2_find_multi_uframe(hsotg, qh);
- }
+ if (qh->dev_speed == USB_SPEED_HIGH)
+ ret = dwc2_uframe_schedule_hs(hsotg, qh);
+ else if (!qh->do_split)
+ ret = dwc2_uframe_schedule_ls(hsotg, qh);
+ else
+ ret = dwc2_uframe_schedule_split(hsotg, qh);
+
+ if (ret)
+ dwc2_sch_dbg(hsotg, "QH=%p Failed to schedule %d\n", qh, ret);
+ else
+ dwc2_qh_schedule_print(hsotg, qh);
+
return ret;
}
+/**
+ * dwc2_uframe_unschedule - Undoes dwc2_uframe_schedule().
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh: QH for the periodic transfer.
+ */
+static void dwc2_uframe_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int i;
+
+ for (i = 0; i < qh->num_hs_transfers; i++)
+ dwc2_hs_pmap_unschedule(hsotg, qh, i);
+
+ if (qh->schedule_low_speed)
+ dwc2_ls_pmap_unschedule(hsotg, qh);
+
+ dwc2_sch_dbg(hsotg, "QH=%p Unscheduled\n", qh);
+}
+
/**
* dwc2_pick_first_frame() - Choose 1st frame for qh that's already scheduled
*
u16 frame_number;
u16 earliest_frame;
u16 next_active_frame;
+ u16 relative_frame;
u16 interval;
/*
goto exit;
}
- /* Adjust interval as per high speed schedule which has 8 uFrame */
- interval = gcd(qh->host_interval, 8);
+ if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) {
+ /*
+ * We're either at high speed or we're doing a split (which
+ * means we're talking high speed to a hub). In any case
+ * the first frame should be based on when the first scheduled
+ * event is.
+ */
+ WARN_ON(qh->num_hs_transfers < 1);
+
+ relative_frame = qh->hs_transfers[0].start_schedule_us /
+ DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+ /* Adjust interval as per high speed schedule */
+ interval = gcd(qh->host_interval, DWC2_HS_SCHEDULE_UFRAMES);
+
+ } else {
+ /*
+ * Low or full speed directly on dwc2. Just about the same
+ * as high speed but on a different schedule and with slightly
+ * different adjustments. Note that this works because when
+ * the host and device are both low speed then frames in the
+ * controller tick at low speed.
+ */
+ relative_frame = qh->ls_start_schedule_slice /
+ DWC2_LS_PERIODIC_SLICES_PER_FRAME;
+ interval = gcd(qh->host_interval, DWC2_LS_SCHEDULE_FRAMES);
+ }
+
+ /* Scheduler messed up if frame is past interval */
+ WARN_ON(relative_frame >= interval);
/*
* We know interval must divide (HFNUM_MAX_FRNUM + 1) now that we've
* scheduled for.
*/
next_active_frame = dwc2_frame_num_inc(next_active_frame,
- qh->assigned_uframe);
+ relative_frame);
/*
* We actually need 1 frame before since the next_active_frame is
int status;
if (hsotg->core_params->uframe_sched > 0) {
- status = dwc2_find_uframe(hsotg, qh);
- if (status >= 0)
- qh->assigned_uframe = status;
+ status = dwc2_uframe_schedule(hsotg, qh);
} else {
status = dwc2_periodic_channel_available(hsotg);
if (status) {
hsotg->periodic_usecs -= qh->host_us;
if (hsotg->core_params->uframe_sched > 0) {
- int i;
-
- for (i = 0; i < 8; i++) {
- hsotg->frame_usecs[i] += qh->frame_usecs[i];
- qh->frame_usecs[i] = 0;
- }
+ dwc2_uframe_unschedule(hsotg, qh);
} else {
/* Release periodic channel reservation */
hsotg->periodic_channels--;
* @qh: The QH to init
* @urb: Holds the information about the device/endpoint needed to initialize
* the QH
+ * @mem_flags: Flags for allocating memory.
*/
static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
- struct dwc2_hcd_urb *urb)
+ struct dwc2_hcd_urb *urb, gfp_t mem_flags)
{
- int dev_speed, hub_addr, hub_port;
+ int dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+ u8 ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+ bool ep_is_in = !!dwc2_hcd_is_pipe_in(&urb->pipe_info);
+ bool ep_is_isoc = (ep_type == USB_ENDPOINT_XFER_ISOC);
+ bool ep_is_int = (ep_type == USB_ENDPOINT_XFER_INT);
+ u32 hprt = dwc2_readl(hsotg->regs + HPRT0);
+ u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+ bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
+ dev_speed != USB_SPEED_HIGH);
+ int maxp = dwc2_hcd_get_mps(&urb->pipe_info);
+ int bytecount = dwc2_hb_mult(maxp) * dwc2_max_packet(maxp);
char *speed, *type;
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
/* Initialize QH */
qh->hsotg = hsotg;
setup_timer(&qh->unreserve_timer, dwc2_unreserve_timer_fn,
(unsigned long)qh);
- qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
- qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
+ qh->ep_type = ep_type;
+ qh->ep_is_in = ep_is_in;
qh->data_toggle = DWC2_HC_PID_DATA0;
- qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
+ qh->maxp = maxp;
INIT_LIST_HEAD(&qh->qtd_list);
INIT_LIST_HEAD(&qh->qh_list_entry);
- /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
- dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+ qh->do_split = do_split;
+ qh->dev_speed = dev_speed;
+
+ if (ep_is_int || ep_is_isoc) {
+ /* Compute scheduling parameters once and save them */
+ int host_speed = do_split ? USB_SPEED_HIGH : dev_speed;
+ struct dwc2_tt *dwc_tt = dwc2_host_get_tt_info(hsotg, urb->priv,
+ mem_flags,
+ &qh->ttport);
+ int device_ns;
- dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+ qh->dwc_tt = dwc_tt;
- if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
- hub_addr != 0 && hub_addr != 1) {
- dev_vdbg(hsotg->dev,
- "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
- hub_port);
- qh->do_split = 1;
- }
+ qh->host_us = NS_TO_US(usb_calc_bus_time(host_speed, ep_is_in,
+ ep_is_isoc, bytecount));
+ device_ns = usb_calc_bus_time(dev_speed, ep_is_in,
+ ep_is_isoc, bytecount);
- if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
- qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* Compute scheduling parameters once and save them */
- u32 hprt, prtspd;
-
- /* Todo: Account for split transfers in the bus time */
- int bytecount =
- dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
-
- qh->host_us = NS_TO_US(usb_calc_bus_time(qh->do_split ?
- USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
- qh->ep_type == USB_ENDPOINT_XFER_ISOC,
- bytecount));
-
- qh->host_interval = urb->interval;
- dwc2_sch_dbg(hsotg, "QH=%p init nxt=%04x, fn=%04x, int=%#x\n",
- qh, qh->next_active_frame, hsotg->frame_number,
- qh->host_interval);
-#if 0
- /* Increase interrupt polling rate for debugging */
- if (qh->ep_type == USB_ENDPOINT_XFER_INT)
- qh->host_interval = 8;
-#endif
- hprt = dwc2_readl(hsotg->regs + HPRT0);
- prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- if (prtspd == HPRT0_SPD_HIGH_SPEED &&
- (dev_speed == USB_SPEED_LOW ||
- dev_speed == USB_SPEED_FULL)) {
- qh->host_interval *= 8;
- dwc2_sch_dbg(hsotg,
- "QH=%p init*8 nxt=%04x, fn=%04x, int=%#x\n",
- qh, qh->next_active_frame,
- hsotg->frame_number, qh->host_interval);
+ if (do_split && dwc_tt)
+ device_ns += dwc_tt->usb_tt->think_time;
+ qh->device_us = NS_TO_US(device_ns);
- }
- dev_dbg(hsotg->dev, "interval=%d\n", qh->host_interval);
- }
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
- dwc2_hcd_get_dev_addr(&urb->pipe_info));
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info),
- dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+ qh->device_interval = urb->interval;
+ qh->host_interval = urb->interval * (do_split ? 8 : 1);
- qh->dev_speed = dev_speed;
+ /*
+ * Schedule low speed if we're running the host in low or
+ * full speed OR if we've got a "TT" to deal with to access this
+ * device.
+ */
+ qh->schedule_low_speed = prtspd != HPRT0_SPD_HIGH_SPEED ||
+ dwc_tt;
+
+ if (do_split) {
+ /* We won't know num transfers until we schedule */
+ qh->num_hs_transfers = -1;
+ } else if (dev_speed == USB_SPEED_HIGH) {
+ qh->num_hs_transfers = 1;
+ } else {
+ qh->num_hs_transfers = 0;
+ }
+
+ /* We'll schedule later when we have something to do */
+ }
switch (dev_speed) {
case USB_SPEED_LOW:
speed = "?";
break;
}
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
switch (qh->ep_type) {
case USB_ENDPOINT_XFER_ISOC:
break;
}
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
- qh->host_us);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
- qh->host_interval);
+ dwc2_sch_dbg(hsotg, "QH=%p Init %s, %s speed, %d bytes:\n", qh, type,
+ speed, bytecount);
+ dwc2_sch_dbg(hsotg, "QH=%p ...addr=%d, ep=%d, %s\n", qh,
+ dwc2_hcd_get_dev_addr(&urb->pipe_info),
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ ep_is_in ? "IN" : "OUT");
+ if (ep_is_int || ep_is_isoc) {
+ dwc2_sch_dbg(hsotg,
+ "QH=%p ...duration: host=%d us, device=%d us\n",
+ qh, qh->host_us, qh->device_us);
+ dwc2_sch_dbg(hsotg, "QH=%p ...interval: host=%d, device=%d\n",
+ qh, qh->host_interval, qh->device_interval);
+ if (qh->schedule_low_speed)
+ dwc2_sch_dbg(hsotg, "QH=%p ...low speed schedule=%p\n",
+ qh, dwc2_get_ls_map(hsotg, qh));
}
}
if (!qh)
return NULL;
- dwc2_qh_init(hsotg, qh, urb);
+ dwc2_qh_init(hsotg, qh, urb, mem_flags);
if (hsotg->core_params->dma_desc_enable > 0 &&
dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
dwc2_do_unreserve(hsotg, qh);
spin_unlock_irqrestore(&hsotg->lock, flags);
}
+ dwc2_host_put_tt_info(hsotg, qh->dwc_tt);
if (qh->desc_list)
dwc2_hcd_qh_free_ddma(hsotg, qh);
u16 incr;
/*
+ * See dwc2_uframe_schedule_split() for split scheduling.
+ *
* Basically: increment 1 normally, but 2 right after the start split
* (except for ISOC out).
*/
if (qh->start_active_frame == qh->next_active_frame ||
dwc2_frame_num_gt(prev_frame_number, qh->start_active_frame)) {
u16 ideal_start = qh->start_active_frame;
+ int periods_in_map;
- /* Adjust interval as per gcd with plan length. */
- interval = gcd(interval, 8);
+ /*
+ * Adjust interval as per gcd with map size.
+ * See pmap_schedule() for more details here.
+ */
+ if (qh->do_split || qh->dev_speed == USB_SPEED_HIGH)
+ periods_in_map = DWC2_HS_SCHEDULE_UFRAMES;
+ else
+ periods_in_map = DWC2_LS_SCHEDULE_FRAMES;
+ interval = gcd(interval, periods_in_map);
do {
qh->start_active_frame = dwc2_frame_num_inc(
projects / linux-beck.git / commitdiff