]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ARM: dts: sun8i: Add sun8i-a23-a33 dtsi
authorVishnu Patekar <vishnupatekar0510@gmail.com>
Sat, 30 May 2015 14:55:03 +0000 (16:55 +0200)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Tue, 2 Jun 2015 07:53:49 +0000 (09:53 +0200)
Rename sun8i-a23.dtsi to sun8i-a23-a33.dtsi as the base dtsi for the A33
is 99% the same and add a new sun8i-a23.dtsi including sun8i-a23-a33.dtsi
and setting the few things not shared with the A33 (mbus-clk, pio
compatible and interrupts).

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Chen-Yu Tsai <wens@csie.org>
arch/arm/boot/dts/sun8i-a23-a33.dtsi [new file with mode: 0644]
arch/arm/boot/dts/sun8i-a23.dtsi

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
new file mode 100644 (file)
index 0000000..c73d1d1
--- /dev/null
@@ -0,0 +1,616 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       interrupt-parent = <&gic>;
+
+       chosen {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               framebuffer@0 {
+                       compatible = "allwinner,simple-framebuffer",
+                                    "simple-framebuffer";
+                       allwinner,pipeline = "de_be0-lcd0";
+                       clocks = <&pll6 0>;
+                       status = "disabled";
+               };
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+               clock-frequency = <24000000>;
+               arm,cpu-registers-not-fw-configured;
+       };
+
+       cpus {
+               enable-method = "allwinner,sun8i-a23";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               osc24M: osc24M_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <24000000>;
+                       clock-output-names = "osc24M";
+               };
+
+               osc32k: osc32k_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <32768>;
+                       clock-output-names = "osc32k";
+               };
+
+               pll1: clk@01c20000 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun8i-a23-pll1-clk";
+                       reg = <0x01c20000 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll1";
+               };
+
+               /* dummy clock until actually implemented */
+               pll5: pll5_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <0>;
+                       clock-output-names = "pll5";
+               };
+
+               pll6: clk@01c20028 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun6i-a31-pll6-clk";
+                       reg = <0x01c20028 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll6", "pll6x2";
+               };
+
+               cpu: cpu_clk@01c20050 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-cpu-clk";
+                       reg = <0x01c20050 0x4>;
+
+                       /*
+                        * PLL1 is listed twice here.
+                        * While it looks suspicious, it's actually documented
+                        * that way both in the datasheet and in the code from
+                        * Allwinner.
+                        */
+                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+                       clock-output-names = "cpu";
+               };
+
+               axi: axi_clk@01c20050 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun8i-a23-axi-clk";
+                       reg = <0x01c20050 0x4>;
+                       clocks = <&cpu>;
+                       clock-output-names = "axi";
+               };
+
+               ahb1: ahb1_clk@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun6i-a31-ahb1-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+                       clock-output-names = "ahb1";
+               };
+
+               apb1: apb1_clk@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb0-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&ahb1>;
+                       clock-output-names = "apb1";
+               };
+
+               ahb1_gates: clk@01c20060 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+                       reg = <0x01c20060 0x8>;
+                       clocks = <&ahb1>;
+                       clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+                                       "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+                                       "ahb1_nand", "ahb1_sdram",
+                                       "ahb1_hstimer", "ahb1_spi0",
+                                       "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+                                       "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+                                       "ahb1_csi", "ahb1_be",  "ahb1_fe",
+                                       "ahb1_gpu", "ahb1_spinlock",
+                                       "ahb1_drc";
+               };
+
+               apb1_gates: clk@01c20068 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+                       reg = <0x01c20068 0x4>;
+                       clocks = <&apb1>;
+                       clock-output-names = "apb1_codec", "apb1_pio",
+                                       "apb1_daudio0", "apb1_daudio1";
+               };
+
+               apb2: clk@01c20058 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb1-clk";
+                       reg = <0x01c20058 0x4>;
+                       clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+                       clock-output-names = "apb2";
+               };
+
+               apb2_gates: clk@01c2006c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+                       reg = <0x01c2006c 0x4>;
+                       clocks = <&apb2>;
+                       clock-output-names = "apb2_i2c0", "apb2_i2c1",
+                                       "apb2_i2c2", "apb2_uart0",
+                                       "apb2_uart1", "apb2_uart2",
+                                       "apb2_uart3", "apb2_uart4";
+               };
+
+               mmc0_clk: clk@01c20088 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c20088 0x4>;
+                       clocks = <&osc24M>, <&pll6 0>;
+                       clock-output-names = "mmc0",
+                                            "mmc0_output",
+                                            "mmc0_sample";
+               };
+
+               mmc1_clk: clk@01c2008c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c2008c 0x4>;
+                       clocks = <&osc24M>, <&pll6 0>;
+                       clock-output-names = "mmc1",
+                                            "mmc1_output",
+                                            "mmc1_sample";
+               };
+
+               mmc2_clk: clk@01c20090 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c20090 0x4>;
+                       clocks = <&osc24M>, <&pll6 0>;
+                       clock-output-names = "mmc2",
+                                            "mmc2_output",
+                                            "mmc2_sample";
+               };
+       };
+
+       soc@01c00000 {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               dma: dma-controller@01c02000 {
+                       compatible = "allwinner,sun8i-a23-dma";
+                       reg = <0x01c02000 0x1000>;
+                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ahb1_gates 6>;
+                       resets = <&ahb1_rst 6>;
+                       #dma-cells = <1>;
+               };
+
+               mmc0: mmc@01c0f000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c0f000 0x1000>;
+                       clocks = <&ahb1_gates 8>,
+                                <&mmc0_clk 0>,
+                                <&mmc0_clk 1>,
+                                <&mmc0_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ahb1_rst 8>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@01c10000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c10000 0x1000>;
+                       clocks = <&ahb1_gates 9>,
+                                <&mmc1_clk 0>,
+                                <&mmc1_clk 1>,
+                                <&mmc1_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ahb1_rst 9>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc2: mmc@01c11000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c11000 0x1000>;
+                       clocks = <&ahb1_gates 10>,
+                                <&mmc2_clk 0>,
+                                <&mmc2_clk 1>,
+                                <&mmc2_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ahb1_rst 10>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               pio: pinctrl@01c20800 {
+                       /* compatible gets set in SoC specific dtsi file */
+                       reg = <0x01c20800 0x400>;
+                       /* interrupts get set in SoC specific dtsi file */
+                       clocks = <&apb1_gates 5>;
+                       gpio-controller;
+                       interrupt-controller;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #gpio-cells = <3>;
+
+                       uart0_pins_a: uart0@0 {
+                               allwinner,pins = "PF2", "PF4";
+                               allwinner,function = "uart0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       mmc0_pins_a: mmc0@0 {
+                               allwinner,pins = "PF0", "PF1", "PF2",
+                                                "PF3", "PF4", "PF5";
+                               allwinner,function = "mmc0";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       mmc1_pins_a: mmc1@0 {
+                               allwinner,pins = "PG0", "PG1", "PG2",
+                                                "PG3", "PG4", "PG5";
+                               allwinner,function = "mmc1";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2c0_pins_a: i2c0@0 {
+                               allwinner,pins = "PH2", "PH3";
+                               allwinner,function = "i2c0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2c1_pins_a: i2c1@0 {
+                               allwinner,pins = "PH4", "PH5";
+                               allwinner,function = "i2c1";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2c2_pins_a: i2c2@0 {
+                               allwinner,pins = "PE12", "PE13";
+                               allwinner,function = "i2c2";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+               };
+
+               ahb1_rst: reset@01c202c0 {
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun6i-a31-clock-reset";
+                       reg = <0x01c202c0 0xc>;
+               };
+
+               apb1_rst: reset@01c202d0 {
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun6i-a31-clock-reset";
+                       reg = <0x01c202d0 0x4>;
+               };
+
+               apb2_rst: reset@01c202d8 {
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun6i-a31-clock-reset";
+                       reg = <0x01c202d8 0x4>;
+               };
+
+               timer@01c20c00 {
+                       compatible = "allwinner,sun4i-a10-timer";
+                       reg = <0x01c20c00 0xa0>;
+                       interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&osc24M>;
+               };
+
+               wdt0: watchdog@01c20ca0 {
+                       compatible = "allwinner,sun6i-a31-wdt";
+                       reg = <0x01c20ca0 0x20>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               lradc: lradc@01c22800 {
+                       compatible = "allwinner,sun4i-a10-lradc-keys";
+                       reg = <0x01c22800 0x100>;
+                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
+
+               uart0: serial@01c28000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28000 0x400>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb2_gates 16>;
+                       resets = <&apb2_rst 16>;
+                       dmas = <&dma 6>, <&dma 6>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               uart1: serial@01c28400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28400 0x400>;
+                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb2_gates 17>;
+                       resets = <&apb2_rst 17>;
+                       dmas = <&dma 7>, <&dma 7>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               uart2: serial@01c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb2_gates 18>;
+                       resets = <&apb2_rst 18>;
+                       dmas = <&dma 8>, <&dma 8>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               uart3: serial@01c28c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28c00 0x400>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb2_gates 19>;
+                       resets = <&apb2_rst 19>;
+                       dmas = <&dma 9>, <&dma 9>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               uart4: serial@01c29000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29000 0x400>;
+                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb2_gates 20>;
+                       resets = <&apb2_rst 20>;
+                       dmas = <&dma 10>, <&dma 10>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2ac00 0x400>;
+                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&apb2_gates 0>;
+                       resets = <&apb2_rst 0>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c1: i2c@01c2b000 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2b000 0x400>;
+                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&apb2_gates 1>;
+                       resets = <&apb2_rst 1>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2: i2c@01c2b400 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2b400 0x400>;
+                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&apb2_gates 2>;
+                       resets = <&apb2_rst 2>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               gic: interrupt-controller@01c81000 {
+                       compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x1000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               };
+
+               rtc: rtc@01f00000 {
+                       compatible = "allwinner,sun6i-a31-rtc";
+                       reg = <0x01f00000 0x54>;
+                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               prcm@01f01400 {
+                       compatible = "allwinner,sun8i-a23-prcm";
+                       reg = <0x01f01400 0x200>;
+
+                       ar100: ar100_clk {
+                               compatible = "fixed-factor-clock";
+                               #clock-cells = <0>;
+                               clock-div = <1>;
+                               clock-mult = <1>;
+                               clocks = <&osc24M>;
+                               clock-output-names = "ar100";
+                       };
+
+                       ahb0: ahb0_clk {
+                               compatible = "fixed-factor-clock";
+                               #clock-cells = <0>;
+                               clock-div = <1>;
+                               clock-mult = <1>;
+                               clocks = <&ar100>;
+                               clock-output-names = "ahb0";
+                       };
+
+                       apb0: apb0_clk {
+                               compatible = "allwinner,sun8i-a23-apb0-clk";
+                               #clock-cells = <0>;
+                               clocks = <&ahb0>;
+                               clock-output-names = "apb0";
+                       };
+
+                       apb0_gates: apb0_gates_clk {
+                               compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+                               #clock-cells = <1>;
+                               clocks = <&apb0>;
+                               clock-output-names = "apb0_pio", "apb0_timer",
+                                               "apb0_rsb", "apb0_uart",
+                                               "apb0_i2c";
+                       };
+
+                       apb0_rst: apb0_rst {
+                               compatible = "allwinner,sun6i-a31-clock-reset";
+                               #reset-cells = <1>;
+                       };
+               };
+
+               cpucfg@01f01c00 {
+                       compatible = "allwinner,sun8i-a23-cpuconfig";
+                       reg = <0x01f01c00 0x300>;
+               };
+
+               r_uart: serial@01f02800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01f02800 0x400>;
+                       interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb0_gates 4>;
+                       resets = <&apb0_rst 4>;
+                       status = "disabled";
+               };
+
+               r_pio: pinctrl@01f02c00 {
+                       compatible = "allwinner,sun8i-a23-r-pinctrl";
+                       reg = <0x01f02c00 0x400>;
+                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&apb0_gates 0>;
+                       resets = <&apb0_rst 0>;
+                       gpio-controller;
+                       interrupt-controller;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #gpio-cells = <3>;
+
+                       r_uart_pins_a: r_uart@0 {
+                               allwinner,pins = "PL2", "PL3";
+                               allwinner,function = "s_uart";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+               };
+       };
+};
index 7297f9629ef41284e1c3f61da28121a91e907f36..8698f7aa31c71b20f9c67f2334c8c970fa48c989 100644 (file)
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-a23-a33.dtsi"
 
 / {
-       interrupt-parent = <&gic>;
-
-       chosen {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               framebuffer@0 {
-                       compatible = "allwinner,simple-framebuffer",
-                                    "simple-framebuffer";
-                       allwinner,pipeline = "de_be0-lcd0";
-                       clocks = <&pll6 0>;
-                       status = "disabled";
-               };
-       };
-
-       timer {
-               compatible = "arm,armv7-timer";
-               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-               clock-frequency = <24000000>;
-               arm,cpu-registers-not-fw-configured;
-       };
-
-       cpus {
-               enable-method = "allwinner,sun8i-a23";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "arm,cortex-a7";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "arm,cortex-a7";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
        memory {
                reg = <0x40000000 0x40000000>;
        };
 
        clocks {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               osc24M: osc24M_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <24000000>;
-                       clock-output-names = "osc24M";
-               };
-
-               osc32k: osc32k_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <32768>;
-                       clock-output-names = "osc32k";
-               };
-
-               pll1: clk@01c20000 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-a23-pll1-clk";
-                       reg = <0x01c20000 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll1";
-               };
-
-               /* dummy clock until actually implemented */
-               pll5: pll5_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <0>;
-                       clock-output-names = "pll5";
-               };
-
-               pll6: clk@01c20028 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-pll6-clk";
-                       reg = <0x01c20028 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll6", "pll6x2";
-               };
-
-               cpu: cpu_clk@01c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-cpu-clk";
-                       reg = <0x01c20050 0x4>;
-
-                       /*
-                        * PLL1 is listed twice here.
-                        * While it looks suspicious, it's actually documented
-                        * that way both in the datasheet and in the code from
-                        * Allwinner.
-                        */
-                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-                       clock-output-names = "cpu";
-               };
-
-               axi: axi_clk@01c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-a23-axi-clk";
-                       reg = <0x01c20050 0x4>;
-                       clocks = <&cpu>;
-                       clock-output-names = "axi";
-               };
-
-               ahb1: ahb1_clk@01c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun6i-a31-ahb1-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-                       clock-output-names = "ahb1";
-               };
-
-               apb1: apb1_clk@01c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb0-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&ahb1>;
-                       clock-output-names = "apb1";
-               };
-
-               ahb1_gates: clk@01c20060 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-                       reg = <0x01c20060 0x8>;
-                       clocks = <&ahb1>;
-                       clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-                                       "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-                                       "ahb1_nand", "ahb1_sdram",
-                                       "ahb1_hstimer", "ahb1_spi0",
-                                       "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-                                       "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-                                       "ahb1_csi", "ahb1_be",  "ahb1_fe",
-                                       "ahb1_gpu", "ahb1_spinlock",
-                                       "ahb1_drc";
-               };
-
-               apb1_gates: clk@01c20068 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-                       reg = <0x01c20068 0x4>;
-                       clocks = <&apb1>;
-                       clock-output-names = "apb1_codec", "apb1_pio",
-                                       "apb1_daudio0", "apb1_daudio1";
-               };
-
-               apb2: clk@01c20058 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb1-clk";
-                       reg = <0x01c20058 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-                       clock-output-names = "apb2";
-               };
-
-               apb2_gates: clk@01c2006c {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-                       reg = <0x01c2006c 0x4>;
-                       clocks = <&apb2>;
-                       clock-output-names = "apb2_i2c0", "apb2_i2c1",
-                                       "apb2_i2c2", "apb2_uart0",
-                                       "apb2_uart1", "apb2_uart2",
-                                       "apb2_uart3", "apb2_uart4";
-               };
-
-               mmc0_clk: clk@01c20088 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c20088 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>;
-                       clock-output-names = "mmc0",
-                                            "mmc0_output",
-                                            "mmc0_sample";
-               };
-
-               mmc1_clk: clk@01c2008c {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c2008c 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>;
-                       clock-output-names = "mmc1",
-                                            "mmc1_output",
-                                            "mmc1_sample";
-               };
-
-               mmc2_clk: clk@01c20090 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c20090 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>;
-                       clock-output-names = "mmc2",
-                                            "mmc2_output",
-                                            "mmc2_sample";
-               };
-
                mbus_clk: clk@01c2015c {
                        #clock-cells = <0>;
                        compatible = "allwinner,sun8i-a23-mbus-clk";
                        clock-output-names = "mbus";
                };
        };
+};
 
-       soc@01c00000 {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               dma: dma-controller@01c02000 {
-                       compatible = "allwinner,sun8i-a23-dma";
-                       reg = <0x01c02000 0x1000>;
-                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&ahb1_gates 6>;
-                       resets = <&ahb1_rst 6>;
-                       #dma-cells = <1>;
-               };
-
-               mmc0: mmc@01c0f000 {
-                       compatible = "allwinner,sun5i-a13-mmc";
-                       reg = <0x01c0f000 0x1000>;
-                       clocks = <&ahb1_gates 8>,
-                                <&mmc0_clk 0>,
-                                <&mmc0_clk 1>,
-                                <&mmc0_clk 2>;
-                       clock-names = "ahb",
-                                     "mmc",
-                                     "output",
-                                     "sample";
-                       resets = <&ahb1_rst 8>;
-                       reset-names = "ahb";
-                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               mmc1: mmc@01c10000 {
-                       compatible = "allwinner,sun5i-a13-mmc";
-                       reg = <0x01c10000 0x1000>;
-                       clocks = <&ahb1_gates 9>,
-                                <&mmc1_clk 0>,
-                                <&mmc1_clk 1>,
-                                <&mmc1_clk 2>;
-                       clock-names = "ahb",
-                                     "mmc",
-                                     "output",
-                                     "sample";
-                       resets = <&ahb1_rst 9>;
-                       reset-names = "ahb";
-                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               mmc2: mmc@01c11000 {
-                       compatible = "allwinner,sun5i-a13-mmc";
-                       reg = <0x01c11000 0x1000>;
-                       clocks = <&ahb1_gates 10>,
-                                <&mmc2_clk 0>,
-                                <&mmc2_clk 1>,
-                                <&mmc2_clk 2>;
-                       clock-names = "ahb",
-                                     "mmc",
-                                     "output",
-                                     "sample";
-                       resets = <&ahb1_rst 10>;
-                       reset-names = "ahb";
-                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               pio: pinctrl@01c20800 {
-                       compatible = "allwinner,sun8i-a23-pinctrl";
-                       reg = <0x01c20800 0x400>;
-                       interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&apb1_gates 5>;
-                       gpio-controller;
-                       interrupt-controller;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       #gpio-cells = <3>;
-
-                       uart0_pins_a: uart0@0 {
-                               allwinner,pins = "PF2", "PF4";
-                               allwinner,function = "uart0";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       mmc0_pins_a: mmc0@0 {
-                               allwinner,pins = "PF0", "PF1", "PF2",
-                                                "PF3", "PF4", "PF5";
-                               allwinner,function = "mmc0";
-                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       mmc1_pins_a: mmc1@0 {
-                               allwinner,pins = "PG0", "PG1", "PG2",
-                                                "PG3", "PG4", "PG5";
-                               allwinner,function = "mmc1";
-                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       i2c0_pins_a: i2c0@0 {
-                               allwinner,pins = "PH2", "PH3";
-                               allwinner,function = "i2c0";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       i2c1_pins_a: i2c1@0 {
-                               allwinner,pins = "PH4", "PH5";
-                               allwinner,function = "i2c1";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       i2c2_pins_a: i2c2@0 {
-                               allwinner,pins = "PE12", "PE13";
-                               allwinner,function = "i2c2";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
-
-               ahb1_rst: reset@01c202c0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202c0 0xc>;
-               };
-
-               apb1_rst: reset@01c202d0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d0 0x4>;
-               };
-
-               apb2_rst: reset@01c202d8 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d8 0x4>;
-               };
-
-               timer@01c20c00 {
-                       compatible = "allwinner,sun4i-a10-timer";
-                       reg = <0x01c20c00 0xa0>;
-                       interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&osc24M>;
-               };
-
-               wdt0: watchdog@01c20ca0 {
-                       compatible = "allwinner,sun6i-a31-wdt";
-                       reg = <0x01c20ca0 0x20>;
-                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-               };
-
-               lradc: lradc@01c22800 {
-                       compatible = "allwinner,sun4i-a10-lradc-keys";
-                       reg = <0x01c22800 0x100>;
-                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               uart0: serial@01c28000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01c28000 0x400>;
-                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb2_gates 16>;
-                       resets = <&apb2_rst 16>;
-                       dmas = <&dma 6>, <&dma 6>;
-                       dma-names = "rx", "tx";
-                       status = "disabled";
-               };
-
-               uart1: serial@01c28400 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01c28400 0x400>;
-                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb2_gates 17>;
-                       resets = <&apb2_rst 17>;
-                       dmas = <&dma 7>, <&dma 7>;
-                       dma-names = "rx", "tx";
-                       status = "disabled";
-               };
-
-               uart2: serial@01c28800 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01c28800 0x400>;
-                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb2_gates 18>;
-                       resets = <&apb2_rst 18>;
-                       dmas = <&dma 8>, <&dma 8>;
-                       dma-names = "rx", "tx";
-                       status = "disabled";
-               };
-
-               uart3: serial@01c28c00 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01c28c00 0x400>;
-                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb2_gates 19>;
-                       resets = <&apb2_rst 19>;
-                       dmas = <&dma 9>, <&dma 9>;
-                       dma-names = "rx", "tx";
-                       status = "disabled";
-               };
-
-               uart4: serial@01c29000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01c29000 0x400>;
-                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb2_gates 20>;
-                       resets = <&apb2_rst 20>;
-                       dmas = <&dma 10>, <&dma 10>;
-                       dma-names = "rx", "tx";
-                       status = "disabled";
-               };
-
-               i2c0: i2c@01c2ac00 {
-                       compatible = "allwinner,sun6i-a31-i2c";
-                       reg = <0x01c2ac00 0x400>;
-                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&apb2_gates 0>;
-                       resets = <&apb2_rst 0>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               i2c1: i2c@01c2b000 {
-                       compatible = "allwinner,sun6i-a31-i2c";
-                       reg = <0x01c2b000 0x400>;
-                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&apb2_gates 1>;
-                       resets = <&apb2_rst 1>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               i2c2: i2c@01c2b400 {
-                       compatible = "allwinner,sun6i-a31-i2c";
-                       reg = <0x01c2b400 0x400>;
-                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&apb2_gates 2>;
-                       resets = <&apb2_rst 2>;
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-
-               gic: interrupt-controller@01c81000 {
-                       compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-                       reg = <0x01c81000 0x1000>,
-                             <0x01c82000 0x1000>,
-                             <0x01c84000 0x2000>,
-                             <0x01c86000 0x2000>;
-                       interrupt-controller;
-                       #interrupt-cells = <3>;
-                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-               };
-
-               rtc: rtc@01f00000 {
-                       compatible = "allwinner,sun6i-a31-rtc";
-                       reg = <0x01f00000 0x54>;
-                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-               };
-
-               prcm@01f01400 {
-                       compatible = "allwinner,sun8i-a23-prcm";
-                       reg = <0x01f01400 0x200>;
-
-                       ar100: ar100_clk {
-                               compatible = "fixed-factor-clock";
-                               #clock-cells = <0>;
-                               clock-div = <1>;
-                               clock-mult = <1>;
-                               clocks = <&osc24M>;
-                               clock-output-names = "ar100";
-                       };
-
-                       ahb0: ahb0_clk {
-                               compatible = "fixed-factor-clock";
-                               #clock-cells = <0>;
-                               clock-div = <1>;
-                               clock-mult = <1>;
-                               clocks = <&ar100>;
-                               clock-output-names = "ahb0";
-                       };
-
-                       apb0: apb0_clk {
-                               compatible = "allwinner,sun8i-a23-apb0-clk";
-                               #clock-cells = <0>;
-                               clocks = <&ahb0>;
-                               clock-output-names = "apb0";
-                       };
-
-                       apb0_gates: apb0_gates_clk {
-                               compatible = "allwinner,sun8i-a23-apb0-gates-clk";
-                               #clock-cells = <1>;
-                               clocks = <&apb0>;
-                               clock-output-names = "apb0_pio", "apb0_timer",
-                                               "apb0_rsb", "apb0_uart",
-                                               "apb0_i2c";
-                       };
-
-                       apb0_rst: apb0_rst {
-                               compatible = "allwinner,sun6i-a31-clock-reset";
-                               #reset-cells = <1>;
-                       };
-               };
-
-               cpucfg@01f01c00 {
-                       compatible = "allwinner,sun8i-a23-cpuconfig";
-                       reg = <0x01f01c00 0x300>;
-               };
-
-               r_uart: serial@01f02800 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0x01f02800 0x400>;
-                       interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       clocks = <&apb0_gates 4>;
-                       resets = <&apb0_rst 4>;
-                       status = "disabled";
-               };
-
-               r_pio: pinctrl@01f02c00 {
-                       compatible = "allwinner,sun8i-a23-r-pinctrl";
-                       reg = <0x01f02c00 0x400>;
-                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&apb0_gates 0>;
-                       resets = <&apb0_rst 0>;
-                       gpio-controller;
-                       interrupt-controller;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       #gpio-cells = <3>;
-
-                       r_uart_pins_a: r_uart@0 {
-                               allwinner,pins = "PL2", "PL3";
-                               allwinner,function = "s_uart";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
-       };
+&pio {
+       compatible = "allwinner,sun8i-a23-pinctrl";
+       interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };