Module snd-ua101
----------------
- Module for the Edirol UA-101 audio/MIDI interface.
+ Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
This module supports multiple devices, autoprobe and hotplugging.
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
- __u8 bSubslotSize;
__u8 bFormatType;
+ __u8 bSubslotSize;
__u8 bBitResolution;
__u8 bHeaderLength;
__u8 bControlSize;
* Timer section - /dev/snd/timer
*/
-#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 5)
+#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 6)
enum {
SNDRV_TIMER_CLASS_NONE = -1,
event == SNDRV_TIMER_EVENT_CONTINUE)
resolution = snd_timer_resolution(ti);
if (ti->ccallback)
- ti->ccallback(ti, SNDRV_TIMER_EVENT_START, &tstamp, resolution);
+ ti->ccallback(ti, event, &tstamp, resolution);
if (ti->flags & SNDRV_TIMER_IFLG_SLAVE)
return;
timer = ti->timer;
err = pnp_activate_dev(devmc);
if (err < 0) {
- snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
+ snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
err);
return err;
}
spinlock_t lock;
+ long wss_base;
int irq;
-
-#ifdef CONFIG_PNP
- struct pnp_dev *dev;
- struct pnp_dev *devmpu;
-#endif /* CONFIG_PNP */
};
static int snd_opti9xx_pnp_is_probed;
static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
#ifndef OPTi93X
/* OPTi 82C924 */
- { .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
+ { .id = "OPT0924",
+ .devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
+ .driver_data = 0x0924 },
/* OPTi 82C925 */
- { .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
+ { .id = "OPT0925",
+ .devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
+ .driver_data = 0x0925 },
#else
/* OPTi 82C931/3 */
- { .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
+ { .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
+ .driver_data = 0x0931 },
#endif /* OPTi93X */
{ .id = "" }
};
chip->hardware = hardware;
strcpy(chip->name, snd_opti9xx_names[hardware]);
- chip->mc_base_size = opti9xx_mc_size[hardware];
-
spin_lock_init(&chip->lock);
chip->irq = -1;
+#ifndef OPTi93X
+#ifdef CONFIG_PNP
+ if (isapnp && chip->mc_base)
+ /* PnP resource gives the least 10 bits */
+ chip->mc_base |= 0xc00;
+#endif /* CONFIG_PNP */
+ else {
+ chip->mc_base = 0xf8c;
+ chip->mc_base_size = opti9xx_mc_size[hardware];
+ }
+#else
+ chip->mc_base_size = opti9xx_mc_size[hardware];
+#endif
+
switch (hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C928:
case OPTi9XX_HW_82C929:
- chip->mc_base = 0xf8c;
chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
chip->pwd_reg = 3;
break;
case OPTi9XX_HW_82C924:
case OPTi9XX_HW_82C925:
- chip->mc_base = 0xf8c;
chip->password = 0xe5;
chip->pwd_reg = 3;
break;
spin_unlock_irqrestore(&chip->lock, flags);
return retval;
}
-
+
static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
unsigned char value)
{
static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
- long wss_base,
+ long port,
int irq, int dma1, int dma2,
long mpu_port, int mpu_irq)
{
switch (chip->hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C924:
+ /* opti 929 mode (?), OPL3 clock output, audio enable */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
+ /* enable wave audio */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
case OPTi9XX_HW_82C925:
+ /* enable WSS mode */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+ /* OPL3 FM synthesis */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
+ /* disable Sound Blaster IRQ and DMA */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
#ifdef CS4231
+ /* cs4231/4248 fix enabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
#else
+ /* cs4231/4248 fix disabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
#endif /* CS4231 */
break;
return -EINVAL;
}
- switch (wss_base) {
- case 0x530:
+ /* PnP resource says it decodes only 10 bits of address */
+ switch (port & 0x3ff) {
+ case 0x130:
+ chip->wss_base = 0x530;
wss_base_bits = 0x00;
break;
- case 0x604:
+ case 0x204:
+ chip->wss_base = 0x604;
wss_base_bits = 0x03;
break;
- case 0xe80:
+ case 0x280:
+ chip->wss_base = 0xe80;
wss_base_bits = 0x01;
break;
- case 0xf40:
+ case 0x340:
+ chip->wss_base = 0xf40;
wss_base_bits = 0x02;
break;
default:
- snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
+ snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
#endif /* CS4231 || OPTi93X */
#ifndef OPTi93X
- outb(irq_bits << 3 | dma_bits, wss_base);
+ outb(irq_bits << 3 | dma_bits, chip->wss_base);
#else /* OPTi93X */
snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
#endif /* OPTi93X */
{
struct pnp_dev *pdev;
int err;
+ struct pnp_dev *devmpu;
+#ifndef OPTi93X
+ struct pnp_dev *devmc;
+#endif
- chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
- if (chip->dev == NULL)
+ pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
+ if (pdev == NULL)
return -EBUSY;
- chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
-
- pdev = chip->dev;
-
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
#else
- if (pid->driver_data != 0x0924)
- port = pnp_port_start(pdev, 1);
+ devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
+ if (devmc == NULL)
+ return -EBUSY;
+
+ err = pnp_activate_dev(devmc);
+ if (err < 0) {
+ snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
+ return err;
+ }
+
+ port = pnp_port_start(pdev, 1);
fm_port = pnp_port_start(pdev, 2) + 8;
+ /*
+ * The MC(0) is never accessed and card does not
+ * include it in the PnP resource range. OPTI93x include it.
+ */
+ chip->mc_base = pnp_port_start(devmc, 0) - 1;
+ chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
#endif /* OPTi93X */
irq = pnp_irq(pdev, 0);
dma1 = pnp_dma(pdev, 0);
dma2 = pnp_dma(pdev, 1);
#endif /* CS4231 || OPTi93X */
- pdev = chip->devmpu;
- if (pdev && mpu_port > 0) {
- err = pnp_activate_dev(pdev);
+ devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
+
+ if (devmpu && mpu_port > 0) {
+ err = pnp_activate_dev(devmpu);
if (err < 0) {
- snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
+ snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
mpu_port = -1;
- chip->devmpu = NULL;
} else {
- mpu_port = pnp_port_start(pdev, 0);
- mpu_irq = pnp_irq(pdev, 0);
+ mpu_port = pnp_port_start(devmpu, 0);
+ mpu_irq = pnp_irq(devmpu, 0);
}
}
return pid->driver_data;
if (error)
return error;
- error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
+ error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
#ifdef OPTi93X
WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
#else
sprintf(card->shortname, "OPTi %s", card->driver);
#if defined(CS4231) || defined(OPTi93X)
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
- card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
+ card->shortname, pcm->name,
+ chip->wss_base + 4, irq, dma1, xdma2);
#else
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
- card->shortname, pcm->name, port + 4, irq, dma1);
+ card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
#endif /* CS4231 || OPTi93X */
if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
snd_card_free(card);
return error;
}
- if (hw <= OPTi9XX_HW_82C930)
- chip->mc_base -= 0x80;
-
error = snd_opti9xx_read_check(chip);
if (error) {
snd_printk(KERN_ERR "OPTI chip not found\n");
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <asm/dma.h>
#include <linux/isa.h>
#include <sound/core.h>
*/
/*
- * Coprocessor access types
+ * Coprocessor access types
*/
#define COPR_CUSTOM 0x0001 /* Custom applications */
#define COPR_MIDI 0x0002 /* MIDI (MPU-401) emulation */
int dev;
/* State variables */
- int opened;
+ int opened;
spinlock_t lock;
-
+
/* MIDI fields */
int my_mididev;
int pair_mididev;
int intr_active;
void (*midi_input_intr) (int dev, unsigned char data);
} vmidi_devc;
-
OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
(reg << 9) | value);
if (reg < ARRAY_SIZE(data->wm8776_regs)) {
- if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
+ if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
value &= ~WM8776_UPDATE;
data->wm8776_regs[reg] = value;
}
}
snd_iprintf(buffer, "Paths:\n");
i = getpaths(cif, p);
- while (i--) {
- snd_iprintf(buffer, "%x->%x ", p[i - 1], p[i]);
- i--;
+ while (i >= 2) {
+ i -= 2;
+ snd_iprintf(buffer, "%x->%x ", p[i], p[i + 1]);
}
snd_iprintf(buffer, "\n");
}
will be called snd-usb-audio.
config SND_USB_UA101
- tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+ tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
select SND_PCM
select SND_RAWMIDI
help
- Say Y here to include support for the Edirol UA-101 audio/MIDI
- interface.
+ Say Y here to include support for the Edirol UA-101 and UA-1000
+ audio/MIDI interfaces.
To compile this driver as a module, choose M here: the module
will be called snd-ua101.
int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
-void snd_usb_caiaq_midi_output_done(struct urb* urb);
+void snd_usb_caiaq_midi_output_done(struct urb *urb);
#endif /* CAIAQ_MIDI_H */
/*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
*
* This driver is free software: you can redistribute it and/or modify
#include <sound/pcm_params.h>
#include "usbaudio.h"
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
-
-/* I use my UA-1A for testing because I don't have a UA-101 ... */
-#define UA1A_HACK
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
/*
* Should not be lower than the minimum scheduling delay of the host
dma_addr_t dma;
} buffers[MAX_MEMORY_BUFFERS];
} capture, playback;
-
- unsigned int fps[10];
- unsigned int frame_counter;
};
static DEFINE_MUTEX(devices_mutex);
if (do_period_elapsed)
snd_pcm_period_elapsed(stream->substream);
- /* for debugging: measure the sample rate relative to the USB clock */
- ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
- if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
- printk(KERN_DEBUG "capture rate:");
- for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
- printk(KERN_CONT " %u", ua->fps[frames]);
- printk(KERN_CONT "\n");
- memset(ua->fps, 0, sizeof(ua->fps));
- ua->frame_counter = 0;
- }
return;
stream_stopped:
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = &midi_ep
};
+ static const int intf_numbers[2][3] = {
+ { /* UA-101 */
+ [INTF_PLAYBACK] = 0,
+ [INTF_CAPTURE] = 1,
+ [INTF_MIDI] = 2,
+ },
+ { /* UA-1000 */
+ [INTF_CAPTURE] = 1,
+ [INTF_PLAYBACK] = 2,
+ [INTF_MIDI] = 3,
+ },
+ };
struct snd_card *card;
struct ua101 *ua;
unsigned int card_index, i;
+ int is_ua1000;
+ const char *name;
char usb_path[32];
int err;
- if (interface->altsetting->desc.bInterfaceNumber != 0)
+ is_ua1000 = usb_id->idProduct == 0x0044;
+
+ if (interface->altsetting->desc.bInterfaceNumber !=
+ intf_numbers[is_ua1000][0])
return -ENODEV;
mutex_lock(&devices_mutex);
init_waitqueue_head(&ua->rate_feedback_wait);
init_waitqueue_head(&ua->alsa_playback_wait);
-#ifdef UA1A_HACK
- if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
- ua->intf[2] = interface;
- ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
- ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
- usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
- usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
- } else {
-#endif
ua->intf[0] = interface;
for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
- ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+ ua->intf[i] = usb_ifnum_to_if(ua->dev,
+ intf_numbers[is_ua1000][i]);
if (!ua->intf[i]) {
- dev_err(&ua->dev->dev, "interface %u not found\n", i);
+ dev_err(&ua->dev->dev, "interface %u not found\n",
+ intf_numbers[is_ua1000][i]);
err = -ENXIO;
goto probe_error;
}
goto probe_error;
}
}
-#ifdef UA1A_HACK
- }
-#endif
snd_card_set_dev(card, &interface->dev);
-#ifdef UA1A_HACK
- if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
- ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
- ua->rate = 44100;
- ua->packets_per_second = 1000;
- ua->capture.channels = 2;
- ua->playback.channels = 2;
- ua->capture.frame_bytes = 4;
- ua->playback.frame_bytes = 4;
- ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
- ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
- ua->capture.max_packet_bytes = 192;
- ua->playback.max_packet_bytes = 192;
- } else {
-#endif
err = detect_usb_format(ua);
if (err < 0)
goto probe_error;
-#ifdef UA1A_HACK
- }
-#endif
+ name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
strcpy(card->driver, "UA-101");
- strcpy(card->shortname, "UA-101");
+ strcpy(card->shortname, name);
usb_make_path(ua->dev, usb_path, sizeof(usb_path));
snprintf(ua->card->longname, sizeof(ua->card->longname),
- "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+ "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
if (err < 0)
goto probe_error;
- err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+ err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
if (err < 0)
goto probe_error;
ua->pcm->private_data = ua;
- strcpy(ua->pcm->name, "UA-101");
+ strcpy(ua->pcm->name, name);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
-#ifdef UA1A_HACK
- if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
-#endif
err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
&ua->midi_list, &midi_quirk);
if (err < 0)
goto probe_error;
-#ifdef UA1A_HACK
- }
-#endif
err = snd_card_register(card);
if (err < 0)
}
static struct usb_device_id ua101_ids[] = {
-#ifdef UA1A_HACK
- { USB_DEVICE(0x0582, 0x0018) },
-#endif
- { USB_DEVICE(0x0582, 0x007d) },
- { USB_DEVICE(0x0582, 0x008d) },
+ { USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+ { USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+ { USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
{ }
};
MODULE_DEVICE_TABLE(usb, ua101_ids);
sample_width, sample_bytes);
}
/* check the format byte size */
- printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
switch (sample_bytes) {
case 1:
pcm_format = SNDRV_PCM_FORMAT_S8;
chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
+ /* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
+ if (rate == 16000 && chip->usb_id == USB_ID(0x041e, 0x4068))
+ rate = 8000;
fp->rate_table[fp->nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
fp->rate_min = rate;
return 0;
}
-/*
- * Create a stream for an Edirol UA-1000 interface.
- */
-static int create_ua1000_quirk(struct snd_usb_audio *chip,
- struct usb_interface *iface,
- const struct snd_usb_audio_quirk *quirk)
-{
- static const struct audioformat ua1000_format = {
- .format = SNDRV_PCM_FORMAT_S32_LE,
- .fmt_type = UAC_FORMAT_TYPE_I,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- };
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- struct audioformat *fp;
- int stream, err;
-
- if (iface->num_altsetting != 2)
- return -ENXIO;
- alts = &iface->altsetting[1];
- altsd = get_iface_desc(alts);
- if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
- altsd->bNumEndpoints != 1)
- return -ENXIO;
-
- fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
- if (!fp)
- return -ENOMEM;
-
- fp->channels = alts->extra[4];
- fp->iface = altsd->bInterfaceNumber;
- fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
- fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
- fp->datainterval = parse_datainterval(chip, alts);
- fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
- fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
-
- stream = (fp->endpoint & USB_DIR_IN)
- ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = add_audio_endpoint(chip, stream, fp);
- if (err < 0) {
- kfree(fp);
- return err;
- }
- /* FIXME: playback must be synchronized to capture */
- usb_set_interface(chip->dev, fp->iface, 0);
- return 0;
-}
-
static int snd_usb_create_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk);
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
- [QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
};
QUIRK_MIDI_US122L,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
- QUIRK_AUDIO_EDIROL_UA1000,
QUIRK_AUDIO_EDIROL_UAXX,
QUIRK_AUDIO_ALIGN_TRANSFER,
/* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
-/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
/* for QUIRK_IGNORE_INTERFACE, data is NULL */
}
}
},
-{
- USB_DEVICE(0x0582, 0x0044),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Roland",
- .product_name = "UA-1000",
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_EDIROL_UA1000
- },
- {
- .ifnum = 2,
- .type = QUIRK_AUDIO_EDIROL_UA1000
- },
- {
- .ifnum = 3,
- .type = QUIRK_MIDI_FIXED_ENDPOINT,
- .data = & (const struct snd_usb_midi_endpoint_info) {
- .out_cables = 0x0003,
- .in_cables = 0x0003
- }
- },
- {
- .ifnum = -1
- }
- }
- }
-},
{
/* has ID 0x0049 when not in "Advanced Driver" mode */
USB_DEVICE(0x0582, 0x0047),
projects / linux-beck.git / commitdiff