staging: iio: accel: adis16203: Fix 'line over 80 characters' warning

Many of the comments in the same lines with #define
caused checkpatch warning 'line over 80 characters'.

Move all such comments to line before #define.
This style is already used in some other .h files in accel:

Add blank lines after #define to improve readability.

Signed-off-by: Svetlana Orlik <sveta.orlik.code@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 6426e38bf00680171858e957735e5703dc4ee104..b483e4e6475bea18f5f93399322d80b3952529ee 100644 (file)
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -3,45 +3,111 @@
 
 #define ADIS16203_STARTUP_DELAY        220 /* ms */
 
-#define ADIS16203_FLASH_CNT      0x00 /* Flash memory write count */
-#define ADIS16203_SUPPLY_OUT     0x02 /* Output, power supply */
-#define ADIS16203_AUX_ADC        0x08 /* Output, auxiliary ADC input */
-#define ADIS16203_TEMP_OUT       0x0A /* Output, temperature */
-#define ADIS16203_XINCL_OUT      0x0C /* Output, x-axis inclination */
-#define ADIS16203_YINCL_OUT      0x0E /* Output, y-axis inclination */
-#define ADIS16203_INCL_NULL      0x18 /* Incline null calibration */
-#define ADIS16203_ALM_MAG1       0x20 /* Alarm 1 amplitude threshold */
-#define ADIS16203_ALM_MAG2       0x22 /* Alarm 2 amplitude threshold */
-#define ADIS16203_ALM_SMPL1      0x24 /* Alarm 1, sample period */
-#define ADIS16203_ALM_SMPL2      0x26 /* Alarm 2, sample period */
-#define ADIS16203_ALM_CTRL       0x28 /* Alarm control */
-#define ADIS16203_AUX_DAC        0x30 /* Auxiliary DAC data */
-#define ADIS16203_GPIO_CTRL      0x32 /* General-purpose digital input/output control */
-#define ADIS16203_MSC_CTRL       0x34 /* Miscellaneous control */
-#define ADIS16203_SMPL_PRD       0x36 /* Internal sample period (rate) control */
-#define ADIS16203_AVG_CNT        0x38 /* Operation, filter configuration */
-#define ADIS16203_SLP_CNT        0x3A /* Operation, sleep mode control */
-#define ADIS16203_DIAG_STAT      0x3C /* Diagnostics, system status register */
-#define ADIS16203_GLOB_CMD       0x3E /* Operation, system command register */
+/* Flash memory write count */
+#define ADIS16203_FLASH_CNT      0x00
+
+/* Output, power supply */
+#define ADIS16203_SUPPLY_OUT     0x02
+
+/* Output, auxiliary ADC input */
+#define ADIS16203_AUX_ADC        0x08
+
+/* Output, temperature */
+#define ADIS16203_TEMP_OUT       0x0A
+
+/* Output, x-axis inclination */
+#define ADIS16203_XINCL_OUT      0x0C
+
+/* Output, y-axis inclination */
+#define ADIS16203_YINCL_OUT      0x0E
+
+/* Incline null calibration */
+#define ADIS16203_INCL_NULL      0x18
+
+/* Alarm 1 amplitude threshold */
+#define ADIS16203_ALM_MAG1       0x20
+
+/* Alarm 2 amplitude threshold */
+#define ADIS16203_ALM_MAG2       0x22
+
+/* Alarm 1, sample period */
+#define ADIS16203_ALM_SMPL1      0x24
+
+/* Alarm 2, sample period */
+#define ADIS16203_ALM_SMPL2      0x26
+
+/* Alarm control */
+#define ADIS16203_ALM_CTRL       0x28
+
+/* Auxiliary DAC data */
+#define ADIS16203_AUX_DAC        0x30
+
+/* General-purpose digital input/output control */
+#define ADIS16203_GPIO_CTRL      0x32
+
+/* Miscellaneous control */
+#define ADIS16203_MSC_CTRL       0x34
+
+/* Internal sample period (rate) control */
+#define ADIS16203_SMPL_PRD       0x36
+
+/* Operation, filter configuration */
+#define ADIS16203_AVG_CNT        0x38
+
+/* Operation, sleep mode control */
+#define ADIS16203_SLP_CNT        0x3A
+
+/* Diagnostics, system status register */
+#define ADIS16203_DIAG_STAT      0x3C
+
+/* Operation, system command register */
+#define ADIS16203_GLOB_CMD       0x3E
 
 /* MSC_CTRL */
-#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST     BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
-#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN      BIT(9)  /* Reverses rotation of both inclination outputs */
-#define ADIS16203_MSC_CTRL_SELF_TEST_EN                BIT(8)  /* Self-test enable */
-#define ADIS16203_MSC_CTRL_DATA_RDY_EN         BIT(2)  /* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16203_MSC_CTRL_ACTIVE_HIGH         BIT(1)  /* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1       BIT(0)  /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+
+/* Self-test at power-on: 1 = disabled, 0 = enabled */
+#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST     BIT(10)
+
+/* Reverses rotation of both inclination outputs */
+#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN      BIT(9)
+
+/* Self-test enable */
+#define ADIS16203_MSC_CTRL_SELF_TEST_EN                BIT(8)
+
+/* Data-ready enable: 1 = enabled, 0 = disabled */
+#define ADIS16203_MSC_CTRL_DATA_RDY_EN         BIT(2)
+
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16203_MSC_CTRL_ACTIVE_HIGH         BIT(1)
+
+/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1       BIT(0)
 
 /* DIAG_STAT */
-#define ADIS16203_DIAG_STAT_ALARM2        BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM1        BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3 /* SPI communications failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2 /* Flash update failure */
-#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1 /* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0 /* Power supply below 3.15 V */
+
+/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM2        BIT(9)
+
+/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM1        BIT(8)
+
+/* Self-test diagnostic error flag */
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
+
+/* SPI communications failure */
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3
+
+/* Flash update failure */
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2
+
+/* Power supply above 3.625 V */
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1
+
+/* Power supply below 3.15 V */
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0
 
 /* GLOB_CMD */
+
 #define ADIS16203_GLOB_CMD_SW_RESET    BIT(7)
 #define ADIS16203_GLOB_CMD_CLEAR_STAT  BIT(4)
 #define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1)