ARM: dts: omap3-beagle-xm: remove unneeded unit names

This patch fixes the following DTC warnings for omap3-beagle-xm.dtb:

"encoder@0 has a unit name, but no reg property"
"encoder@0/ports/port@0/endpoint@0 has a unit name, but no reg property"
"encoder@0/ports/port@1/endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 01e1e2d5c735b3067e46b48b969a32b2e515452a..8ffde06281ad097aa113bf804c57ed6735651ab1 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -91,7 +91,7 @@
                vcc-supply = <&hsusb2_power>;
        };
 
-       tfp410: encoder@0 {
+       tfp410: encoder0 {
                compatible = "ti,tfp410";
                powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
 
@@ -104,7 +104,7 @@
                        port@0 {
                                reg = <0>;
 
-                               tfp410_in: endpoint@0 {
+                               tfp410_in: endpoint {
                                        remote-endpoint = <&dpi_out>;
                                };
                        };
@@ -112,14 +112,14 @@
                        port@1 {
                                reg = <1>;
 
-                               tfp410_out: endpoint@0 {
+                               tfp410_out: endpoint {
                                        remote-endpoint = <&dvi_connector_in>;
                                };
                        };
                };
        };
 
-       dvi0: connector@0 {
+       dvi0: connector0 {
                compatible = "dvi-connector";
                label = "dvi";
 
@@ -134,7 +134,7 @@
                };
        };
 
-       tv0: connector@1 {
+       tv0: connector1 {
                compatible = "svideo-connector";
                label = "tv";