arm64: dts: meson-gxm-nexbox-a1: Fix node order

Sort nodes referenced by label alphabetically.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 920fac10de93c845cdc83d7e4768922317411a52..5f626d6830883466b80b9364547efcf066f6317b 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -113,10 +113,49 @@
        };
 };
 
-&uart_AO {
+&cvbs_vdac_port {
+       cvbs_vdac_out: endpoint {
+               remote-endpoint = <&cvbs_connector_in>;
+       };
+};
+
+&ethmac {
        status = "okay";
-       pinctrl-0 = <&uart_ao_a_pins>;
+
+       pinctrl-0 = <&eth_pins>;
        pinctrl-names = "default";
+
+       /* Select external PHY by default */
+       phy-handle = <&external_phy>;
+
+       amlogic,tx-delay-ns = <2>;
+
+       snps,reset-gpio = <&gpio GPIOZ_14 0>;
+       snps,reset-delays-us = <0 10000 1000000>;
+       snps,reset-active-low;
+
+       /* External PHY is in RGMII */
+       phy-mode = "rgmii";
+};
+
+&external_mdio {
+       external_phy: ethernet-phy@0 {
+               compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+               reg = <0>;
+               max-speed = <1000>;
+       };
+};
+
+&hdmi_tx {
+       status = "okay";
+       pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+       pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+       hdmi_tx_tmds_out: endpoint {
+               remote-endpoint = <&hdmi_connector_in>;
+       };
 };
 
 &ir {
@@ -163,47 +202,8 @@
        vqmmc-supply = <&vddio_boot>;
 };
 
-&ethmac {
-       status = "okay";
-
-       pinctrl-0 = <&eth_pins>;
-       pinctrl-names = "default";
-
-       /* Select external PHY by default */
-       phy-handle = <&external_phy>;
-
-       amlogic,tx-delay-ns = <2>;
-
-       snps,reset-gpio = <&gpio GPIOZ_14 0>;
-       snps,reset-delays-us = <0 10000 1000000>;
-       snps,reset-active-low;
-
-       /* External PHY is in RGMII */
-       phy-mode = "rgmii";
-};
-
-&external_mdio {
-       external_phy: ethernet-phy@0 {
-               compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
-               reg = <0>;
-               max-speed = <1000>;
-       };
-};
-
-&cvbs_vdac_port {
-       cvbs_vdac_out: endpoint {
-               remote-endpoint = <&cvbs_connector_in>;
-       };
-};
-
-&hdmi_tx {
+&uart_AO {
        status = "okay";
-       pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+       pinctrl-0 = <&uart_ao_a_pins>;
        pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-       hdmi_tx_tmds_out: endpoint {
-               remote-endpoint = <&hdmi_connector_in>;
-       };
-};