Add support for dynamical allocation of imx-keypad on mx5 platform.
After moving to dynamically registration of the keypad, the keypad clock
name needs to change accordingly.
The reason is that the original mx5 keypad platform_device id was 0,
now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c.
Tested keypad successfully on a MX51_3DS board.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
This adds board specific devices that can be found on Eukrea's
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
KEY(3, 5, KEY_BACK)
};
-static struct matrix_keymap_data mx51_3ds_map_data = {
+static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
.keymap = mx51_3ds_board_keymap,
.keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
};
static void mxc_init_keypad(void)
{
- mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+ imx51_add_imx_keypad(&mx51_3ds_map_data);
}
#else
static inline void mxc_init_keypad(void)
_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
- _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+ _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
#define imx51_add_mxc_pwm(id, pdata) \
imx_add_mxc_pwm(&imx51_mxc_pwm_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+#define imx51_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
},
};
-static struct resource mxc_kpp_resources[] = {
- {
- .start = MX51_MXC_INT_KPP,
- .end = MX51_MXC_INT_KPP,
- .flags = IORESOURCE_IRQ,
- } , {
- .start = MX51_KPP_BASE_ADDR,
- .end = MX51_KPP_BASE_ADDR + 0x8 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_keypad_device = {
- .name = "imx-keypad",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_kpp_resources),
- .resource = mxc_kpp_resources,
-};
-
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
extern struct platform_device mxc_usbh2_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_hsi2c_device;
-extern struct platform_device mxc_keypad_device;
#include <linux/fsl_devices.h>
#include <linux/i2c/tsc2007.h>
#include <linux/leds.h>
-#include <linux/input/matrix_keypad.h>
#include <mach/common.h>
#include <mach/hardware.h>
KEY(3, 3, KEY_ENTER),
};
-static struct matrix_keymap_data mbimx51_map_data = {
+static const struct matrix_keymap_data mbimx51_map_data __initconst = {
.keymap = mbimx51_keymap,
.keymap_size = ARRAY_SIZE(mbimx51_keymap),
};
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+ imx51_add_imx_keypad(&mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX51, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
#define MX51_MXC_INT_GPIO4_HIGH 57
#define MX51_MXC_INT_WDOG1 58
#define MX51_MXC_INT_WDOG2 59
-#define MX51_MXC_INT_KPP 60
+#define MX51_INT_KPP 60
#define MX51_INT_PWM1 61
#define MX51_INT_I2C1 62
#define MX51_INT_I2C2 63