i2c: sis630: use hex to constants for SMBus commands

This patch replaces hexadecimal values by constants for SMBus commands.

Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index e152d36b94ac310330ebf5976ab1256df5211175..b2fa7415f7e47cf72544500f780418d282b537dd 100644 (file)
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -81,6 +81,21 @@
 #define SMB_COUNT              0x07    /* byte count */
 #define SMB_BYTE               0x08    /* ~0x8F data byte field */
 
+/* SMB_STS register */
+#define BYTE_DONE_STS          0x10    /* Byte Done Status / Block Array */
+#define SMBCOL_STS             0x04    /* Collision */
+#define SMBERR_STS             0x02    /* Device error */
+
+/* SMB_CNT register */
+#define MSTO_EN                        0x40    /* Host Master Timeout Enable */
+#define SMBCLK_SEL             0x20    /* Host master clock selection */
+#define SMB_PROBE              0x02    /* Bus Probe/Slave busy */
+#define SMB_HOSTBUSY           0x01    /* Host Busy */
+
+/* SMBHOST_CNT register */
+#define SMB_KILL               0x20    /* Kill */
+#define SMB_START              0x10    /* Start */
+
 /* register count for request_region
  * As we don't use SMB_PCOUNT, 20 is ok for SiS630 and SiS964
  */
@@ -140,12 +155,14 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
         int temp;
 
        /* Make sure the SMBus host is ready to start transmitting. */
-       if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
-               dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp);
+       temp = sis630_read(SMB_CNT);
+       if ((temp & (SMB_PROBE | SMB_HOSTBUSY)) != 0x00) {
+               dev_dbg(&adap->dev, "SMBus busy (%02x). Resetting...\n", temp);
                /* kill smbus transaction */
-               sis630_write(SMBHOST_CNT, 0x20);
+               sis630_write(SMBHOST_CNT, SMB_KILL);
 
-               if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
+               temp = sis630_read(SMB_CNT);
+               if (temp & (SMB_PROBE | SMB_HOSTBUSY)) {
                        dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
                        return -EBUSY;
                 } else {
@@ -160,16 +177,16 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
 
        /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */
        if (high_clock)
-               sis630_write(SMB_CNT, 0x20);
+               sis630_write(SMB_CNT, SMBCLK_SEL);
        else
-               sis630_write(SMB_CNT, (*oldclock & ~0x40));
+               sis630_write(SMB_CNT, (*oldclock & ~MSTO_EN));
 
        /* clear all sticky bits */
        temp = sis630_read(SMB_STS);
        sis630_write(SMB_STS, temp & 0x1e);
 
        /* start the transaction by setting bit 4 and size */
-       sis630_write(SMBHOST_CNT,0x10 | (size & 0x07));
+       sis630_write(SMBHOST_CNT, SMB_START | (size & 0x07));
 
        return 0;
 }
@@ -183,7 +200,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
                msleep(1);
                temp = sis630_read(SMB_STS);
                /* check if block transmitted */
-               if (size == SIS630_BLOCK_DATA && (temp & 0x10))
+               if (size == SIS630_BLOCK_DATA && (temp & BYTE_DONE_STS))
                        break;
        } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
 
@@ -193,12 +210,12 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
                result = -ETIMEDOUT;
        }
 
-       if (temp & 0x02) {
+       if (temp & SMBERR_STS) {
                dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
                result = -ENXIO;
        }
 
-       if (temp & 0x04) {
+       if (temp & SMBCOL_STS) {
                dev_err(&adap->dev, "Bus collision!\n");
                result = -EAGAIN;
        }
@@ -217,8 +234,8 @@ static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
         * restore old Host Master Clock if high_clock is set
         * and oldclock was not 56KHz
         */
-       if (high_clock && !(oldclock & 0x20))
-               sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20));
+       if (high_clock && !(oldclock & SMBCLK_SEL))
+               sis630_write(SMB_CNT, sis630_read(SMB_CNT) & ~SMBCLK_SEL);
 
        dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
 }
@@ -270,7 +287,7 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
                                           we must clear sticky bit.
                                           clear SMBARY_STS
                                        */
-                                       sis630_write(SMB_STS,0x10);
+                                       sis630_write(SMB_STS, BYTE_DONE_STS);
                                }
                                rc = sis630_transaction_wait(adap,
                                                SIS630_BLOCK_DATA);
@@ -312,7 +329,7 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
                        dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
 
                        /* clear SMBARY_STS */
-                       sis630_write(SMB_STS,0x10);
+                       sis630_write(SMB_STS, BYTE_DONE_STS);
                } while(len < data->block[0]);
        }