compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91sam9260-sdramc",
+ "atmel,at91sam9g45-ddramc",
+- reg: Should contain registers location and length
+ For at91sam9263 and at91sam9g45 you must specify 2 entries.
+
+Examples:
+
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+ ramc0: ramc@ffffe400 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe400 0x200
+ 0xffffe600 0x200>;
+ };
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffe400 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe400 0x200
+ 0xffffe600 0x200>;
+ };
+
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
}
-static void __init at91sam9x5_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
-}
-
void __init at91sam9x5_initialize(void)
{
at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
struct at91_init_soc __initdata at91sam9x5_soc = {
.map_io = at91sam9x5_map_io,
.default_irq_priority = at91sam9x5_default_irq_priority,
- .ioremap_registers = at91sam9x5_ioremap_registers,
.register_clocks = at91sam9x5_register_clocks,
.init = at91sam9x5_initialize,
};
#define AT91SAM9X5_BASE_USART1 0xf8020000
#define AT91SAM9X5_BASE_USART2 0xf8024000
-/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800
-
/*
* Base addresses for early serial code (uncompress.h)
*/
extern u32 at91_slow_clock_sz;
#endif
-void __iomem *at91_ramc_base[2];
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
- if (id < 0 || id > 1) {
- pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
- BUG();
- }
- at91_ramc_base[id] = ioremap(addr, size);
- if (!at91_ramc_base[id])
- panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
static int at91_pm_enter(suspend_state_t state)
{
at91_gpio_suspend();
at91_gpio_irq_setup();
}
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+ if (id < 0 || id > 1) {
+ pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+ BUG();
+ }
+ at91_ramc_base[id] = ioremap(addr, size);
+ if (!at91_ramc_base[id])
+ panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
+
static struct map_desc sram_desc[2] __initdata;
void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
of_node_put(np);
}
+static struct of_device_id ramc_ids[] = {
+ { .compatible = "atmel,at91sam9260-sdramc" },
+ { .compatible = "atmel,at91sam9g45-ddramc" },
+ { /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, ramc_ids);
+ if (!np)
+ panic("unable to find compatible ram conroller node in dtb\n");
+
+ at91_ramc_base[0] = of_iomap(np, 0);
+ if (!at91_ramc_base[0])
+ panic("unable to map ramc[0] cpu registers\n");
+ /* the controller may have 2 banks */
+ at91_ramc_base[1] = of_iomap(np, 1);
+
+ of_node_put(np);
+}
+
void __init at91_dt_initialize(void)
{
at91_dt_rstc();
-
- /* temporary until have the ramc binding*/
- at91_boot_soc.ioremap_registers();
+ at91_dt_ramc();
/* Init clock subsystem */
at91_dt_clock_init();