(((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \
(addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
+/*
+ * This is rather complicated for humans and ugly to verify, but for a machine
+ * it's OK. Still more as it is usually only applied to constants. The upsides
+ * on using this approach are:
+ *
+ * - same mapping on all i.MX machines
+ * - works for assembler, too
+ * - no need to nurture #defines for virtual addresses
+ *
+ * The downside it, it's hard to verify (but I have a script for that).
+ *
+ * Obviously this needs to be injective for each SoC. In general it maps the
+ * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff]
+ * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
+ *
+ * It applies the following mappings for the different SoCs:
+ *
+ * mx1:
+ * IO 0x00200000+0x100000 -> 0xf4000000+0x100000
+ * mx21:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
+ * mx25:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * mx27:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
+ * mx31:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx35:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx51:
+ * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
+ * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * mxc91231:
+ * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000
+ * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ */
+#define IMX_IO_P2V(x) ( \
+ 0xf4000000 + \
+ (((x) & 0x50000000) >> 6) + \
+ (((x) & 0x0b000000) >> 4) + \
+ (((x) & 0x000fffff)))
+
+#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
+
#ifdef CONFIG_ARCH_MX5
#include <mach/mx51.h>
#endif
*/
#define MX1_IO_BASE_ADDR 0x00200000
#define MX1_IO_SIZE SZ_1M
-#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END
#define MX1_CS0_PHYS 0x10000000
#define MX1_CS0_SIZE 0x02000000
#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR)
/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX1_IO))
+#define MX1_IO_P2V(x) IMX_IO_P2V(x)
#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x))
/* fixed interrput numbers */
/* these should go away */
#define IMX_IO_PHYS MX1_IO_BASE_ADDR
#define IMX_IO_SIZE MX1_IO_SIZE
-#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
#define IMX_CS0_PHYS MX1_CS0_PHYS
#define IMX_CS0_SIZE MX1_CS0_SIZE
#define IMX_CS1_PHYS MX1_CS1_PHYS
#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
-#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX21_AIPI_SIZE SZ_1M
#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
#define MX21_AVIC_BASE_ADDR 0x10040000
#define MX21_SAHB1_BASE_ADDR 0x80000000
-#define MX21_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX21_SAHB1_SIZE SZ_1M
#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
/* NAND, SDRAM, WEIM etc controllers */
#define MX21_X_MEMC_BASE_ADDR 0xdf000000
-#define MX21_X_MEMC_BASE_ADDR_VIRT 0xf4200000
#define MX21_X_MEMC_SIZE SZ_256K
#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
-#define MX21_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX21_AIPI) ?: \
- IMX_IO_P2V_MODULE(x, MX21_SAHB1) ?: \
- IMX_IO_P2V_MODULE(x, MX21_X_MEMC))
+#define MX21_IO_P2V(x) IMX_IO_P2V(x)
#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
/* fixed interrupt numbers */
#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
#define X_MEMC_SIZE MX21_X_MEMC_SIZE
#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
#define __MACH_MX25_H__
#define MX25_AIPS1_BASE_ADDR 0x43f00000
-#define MX25_AIPS1_BASE_ADDR_VIRT 0xfc000000
+#define MX25_AIPS1_BASE_ADDR_VIRT 0xf5300000
#define MX25_AIPS1_SIZE SZ_1M
#define MX25_AIPS2_BASE_ADDR 0x53f00000
-#define MX25_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX25_AIPS2_SIZE SZ_1M
#define MX25_AVIC_BASE_ADDR 0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX25_AVIC_SIZE SZ_1M
#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
-#define MX25_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX25_AIPS1) ?: \
- IMX_IO_P2V_MODULE(x, MX25_AIPS2) ?: \
- IMX_IO_P2V_MODULE(x, MX25_AVIC))
-#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
-
#define MX25_AIPS1_IO_ADDRESS(x) \
(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
#define MX25_OTG_BASE_ADDR 0x53ff4000
#define MX25_CSI_BASE_ADDR 0x53ff8000
+#define MX25_IO_P2V(x) IMX_IO_P2V(x)
+#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
+
#define MX25_INT_CSPI3 0
#define MX25_INT_I2C1 3
#define MX25_INT_I2C2 4
#endif
#define MX27_AIPI_BASE_ADDR 0x10000000
-#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
#define MX27_ROMP_BASE_ADDR 0x10041000
#define MX27_SAHB1_BASE_ADDR 0x80000000
-#define MX27_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX27_SAHB1_SIZE SZ_1M
#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define MX27_X_MEMC_BASE_ADDR 0xd8000000
-#define MX27_X_MEMC_BASE_ADDR_VIRT 0xf4200000
#define MX27_X_MEMC_SIZE SZ_1M
#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
-#define MX27_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX27_AIPI) ?: \
- IMX_IO_P2V_MODULE(x, MX27_SAHB1) ?: \
- IMX_IO_P2V_MODULE(x, MX27_X_MEMC))
+#define MX27_IO_P2V(x) IMX_IO_P2V(x)
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
#ifndef __ASSEMBLER__
#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
#define X_MEMC_SIZE MX27_X_MEMC_SIZE
#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
/* Register offsets */
#define MX2x_AIPI_BASE_ADDR 0x10000000
-#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4000000
+#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4400000
#define MX2x_AIPI_SIZE SZ_1M
#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000)
#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000)
#define MX2x_AVIC_BASE_ADDR 0x10040000
#define MX2x_SAHB1_BASE_ADDR 0x80000000
-#define MX2x_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX2x_SAHB1_SIZE SZ_1M
#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __force __iomem *) \
- (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
- AIPI_IO_ADDRESS(x) : \
- ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
- SAHB1_IO_ADDRESS(x) : \
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
- X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x) \
+#define AIPI_IO_ADDRESS(x) \
(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x) \
- (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
/* fixed interrupt numbers */
#define MX2x_INT_CSPI3 6
#define MX2x_INT_GPIO 8
#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
-#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
#define SAHB1_SIZE MX2x_SAHB1_SIZE
#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
#define MXC_INT_CSPI3 MX2x_INT_CSPI3
#define MX31_L2CC_SIZE SZ_1M
#define MX31_AIPS1_BASE_ADDR 0x43f00000
-#define MX31_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX31_AIPS1_SIZE SZ_1M
#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
#define MX31_SPBA0_BASE_ADDR 0x50000000
-#define MX31_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX31_SPBA0_SIZE SZ_1M
#define MX31_MMC_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
#define MX31_MMC_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
#define MX31_AIPS2_BASE_ADDR 0x53f00000
-#define MX31_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX31_AIPS2_SIZE SZ_1M
#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
#define MX31_ROMP_SIZE SZ_1M
#define MX31_AVIC_BASE_ADDR 0x68000000
-#define MX31_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX31_AVIC_SIZE SZ_1M
#define MX31_IPU_MEM_BASE_ADDR 0x70000000
#define MX31_CS3_BASE_ADDR 0xb2000000
#define MX31_CS4_BASE_ADDR 0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX31_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX31_CS4_SIZE SZ_32M
#define MX31_CS5_BASE_ADDR 0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX31_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX31_CS5_SIZE SZ_32M
#define MX31_X_MEMC_BASE_ADDR 0xb8000000
-#define MX31_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX31_X_MEMC_SIZE SZ_64K
#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
-#define MX31_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX31_AIPS1) ?: \
- IMX_IO_P2V_MODULE(x, MX31_AIPS2) ?: \
- IMX_IO_P2V_MODULE(x, MX31_AVIC) ?: \
- IMX_IO_P2V_MODULE(x, MX31_X_MEMC) ?: \
- IMX_IO_P2V_MODULE(x, MX31_SPBA0))
+#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
#ifndef __ASSEMBLER__
#define MX35_L2CC_SIZE SZ_1M
#define MX35_AIPS1_BASE_ADDR 0x43f00000
-#define MX35_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX35_AIPS1_SIZE SZ_1M
#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
#define MX35_SPBA0_BASE_ADDR 0x50000000
-#define MX35_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX35_SPBA0_SIZE SZ_1M
#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
#define MX35_AIPS2_BASE_ADDR 0x53f00000
-#define MX35_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX35_AIPS2_SIZE SZ_1M
#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
#define MX35_OTG_BASE_ADDR 0x53ff4000
#define MX35_ROMP_BASE_ADDR 0x60000000
-#define MX35_ROMP_BASE_ADDR_VIRT 0xfc500000
#define MX35_ROMP_SIZE SZ_1M
#define MX35_AVIC_BASE_ADDR 0x68000000
-#define MX35_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX35_AVIC_SIZE SZ_1M
/*
#define MX35_CS3_BASE_ADDR 0xb2000000
#define MX35_CS4_BASE_ADDR 0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX35_CS4_SIZE SZ_32M
#define MX35_CS5_BASE_ADDR 0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX35_CS5_SIZE SZ_32M
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MX35_X_MEMC_BASE_ADDR 0xb8000000
-#define MX35_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX35_X_MEMC_SIZE SZ_64K
#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
-#define MX35_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX35_AIPS1) ?: \
- IMX_IO_P2V_MODULE(x, MX35_AIPS2) ?: \
- IMX_IO_P2V_MODULE(x, MX35_AVIC) ?: \
- IMX_IO_P2V_MODULE(x, MX35_X_MEMC) ?: \
- IMX_IO_P2V_MODULE(x, MX35_SPBA0))
+#define MX35_IO_P2V(x) IMX_IO_P2V(x)
#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
/*
* AIPS 1
*/
#define MX3x_AIPS1_BASE_ADDR 0x43f00000
-#define MX3x_AIPS1_BASE_ADDR_VIRT 0xfc000000
+#define MX3x_AIPS1_BASE_ADDR_VIRT 0xf5300000
#define MX3x_AIPS1_SIZE SZ_1M
#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000)
#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000)
* SPBA global module enabled #0
*/
#define MX3x_SPBA0_BASE_ADDR 0x50000000
-#define MX3x_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX3x_SPBA0_SIZE SZ_1M
#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000)
#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000)
* AIPS 2
*/
#define MX3x_AIPS2_BASE_ADDR 0x53f00000
-#define MX3x_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX3x_AIPS2_SIZE SZ_1M
#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000)
#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000)
* ROMP and AVIC
*/
#define MX3x_ROMP_BASE_ADDR 0x60000000
-#define MX3x_ROMP_BASE_ADDR_VIRT 0xfc500000
#define MX3x_ROMP_SIZE SZ_1M
#define MX3x_AVIC_BASE_ADDR 0x68000000
-#define MX3x_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX3x_AVIC_SIZE SZ_1M
/*
#define MX3x_CS3_BASE_ADDR 0xb2000000
#define MX3x_CS4_BASE_ADDR 0xb4000000
-#define MX3x_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX3x_CS4_SIZE SZ_32M
#define MX3x_CS5_BASE_ADDR 0xb6000000
-#define MX3x_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX3x_CS5_SIZE SZ_32M
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MX3x_X_MEMC_BASE_ADDR 0xb8000000
-#define MX3x_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX3x_X_MEMC_SIZE SZ_64K
#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000)
#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000)
#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __force __iomem *) \
- (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
- ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
- ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
- ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
- ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
- ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define L2CC_IO_ADDRESS(x) \
- (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
#define AIPS1_IO_ADDRESS(x) \
(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-#define SPBA0_IO_ADDRESS(x) \
- (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x) \
- (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x) \
- (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) \
- (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define CS5_IO_ADDRESS(x) \
- (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
/*
* Interrupt numbers
*/
#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
-#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
#define SPBA0_SIZE MX3x_SPBA0_SIZE
#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
-#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
#define AIPS2_SIZE MX3x_AIPS2_SIZE
#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
-#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
#define ROMP_SIZE MX3x_ROMP_SIZE
#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
-#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
#define AVIC_SIZE MX3x_AVIC_SIZE
#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
-#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
#define CS4_SIZE MX3x_CS4_SIZE
#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
-#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
#define CS5_SIZE MX3x_CS5_SIZE
#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
#ifndef __MACH_MX51_H__
#define __MACH_MX51_H__
-/*
- * MX51 memory map:
- *
- *
- * Virt Phys Size What
- * ---------------------------------------------------------------------------
- * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM)
- * 30000000 256M GPU
- * 40000000 512M IPU
- * fa200000 60000000 1M DEBUG
- * fb100000 70000000 1M SPBA 0
- * fb000000 73f00000 1M AIPS 1
- * fb200000 83f00000 1M AIPS 2
- * 8fffc000 16K TZIC (interrupt controller)
- * 90000000 256M CSD0 SDRAM/DDR
- * a0000000 256M CSD1 SDRAM/DDR
- * b0000000 128M CS0 Flash
- * b8000000 128M CS1 Flash
- * c0000000 128M CS2 Flash
- * c8000000 64M CS3 Flash
- * cc000000 32M CS4 SRAM
- * ce000000 32M CS5 SRAM
- * cfff0000 64K NFC (NAND Flash AXI)
- */
-
/*
* IROM
*/
* IRAM
*/
#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000
#define MX51_IRAM_PARTITIONS 16
#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000
#define MX51_DEBUG_SIZE SZ_1M
#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
* SPBA global module enabled #0
*/
#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000
#define MX51_SPBA0_SIZE SZ_1M
#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
* AIPS 1
*/
#define MX51_AIPS1_BASE_ADDR 0x73f00000
-#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000
+#define MX51_AIPS1_BASE_ADDR_VIRT 0xf5700000
#define MX51_AIPS1_SIZE SZ_1M
#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
* AIPS 2
*/
#define MX51_AIPS2_BASE_ADDR 0x83f00000
-#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000
#define MX51_AIPS2_SIZE SZ_1M
#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
#define MX51_GPU2D_BASE_ADDR 0xd0000000
#define MX51_TZIC_BASE_ADDR 0xe0000000
-#define MX51_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MX51_IRAM) ?: \
- IMX_IO_P2V_MODULE(x, MX51_DEBUG) ?: \
- IMX_IO_P2V_MODULE(x, MX51_SPBA0) ?: \
- IMX_IO_P2V_MODULE(x, MX51_AIPS1) ?: \
- IMX_IO_P2V_MODULE(x, MX51_AIPS2))
+#define MX51_IO_P2V(x) IMX_IO_P2V(x)
#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
/* This is currently used in <mach/debug-macro.S>, but should go away */
* L2CC
*/
#define MXC91231_L2CC_BASE_ADDR 0x30000000
-#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000
#define MXC91231_L2CC_SIZE SZ_64K
/*
* AIPS 1
*/
#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
-#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000
#define MXC91231_AIPS1_SIZE SZ_1M
#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
* AIPS 2
*/
#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
-#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000
#define MXC91231_AIPS2_SIZE SZ_1M
#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
* SPBA global module 0
*/
#define MXC91231_SPBA0_BASE_ADDR 0x50000000
-#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000
#define MXC91231_SPBA0_SIZE SZ_1M
#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
* SPBA global module 1
*/
#define MXC91231_SPBA1_BASE_ADDR 0x52000000
-#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000
#define MXC91231_SPBA1_SIZE SZ_1M
#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
* ROMP and AVIC
*/
#define MXC91231_ROMP_BASE_ADDR 0x60000000
-#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000
#define MXC91231_ROMP_SIZE SZ_64K
#define MXC91231_AVIC_BASE_ADDR 0x68000000
-#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000
#define MXC91231_AVIC_SIZE SZ_64K
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
-#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000
#define MXC91231_X_MEMC_SIZE SZ_64K
#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
/*
* This macro defines the physical to virtual address mapping for all the
* peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0.
+ * and returning the virtual address.
*/
-
-#define MXC91231_IO_P2V(x) ( \
- IMX_IO_P2V_MODULE(x, MXC91231_L2CC) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_X_MEMC) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_ROMP) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_AVIC) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_AIPS1) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_SPBA0) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_SPBA1) ?: \
- IMX_IO_P2V_MODULE(x, MXC91231_AIPS2))
+#define MXC91231_IO_P2V(x) IMX_IO_P2V(x)
#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x))
/*
projects / linux-beck.git / commitdiff